diff options
author | David S. Miller <davem@davemloft.net> | 2013-01-22 19:47:13 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2013-01-22 19:47:13 (GMT) |
commit | 930d52c012b8e69ea87efd7562ded977ee9c9df9 (patch) | |
tree | d675cd7d81e7fe097c97bb175312ccc271e590b4 | |
parent | 0cc8d8df9bb931f1d4ab376f59d8ab8a49f9d4d4 (diff) | |
parent | 463d413cb7dcd5509bc01e1108c2e2dcf8104683 (diff) | |
download | linux-fsl-qoriq-930d52c012b8e69ea87efd7562ded977ee9c9df9.tar.xz |
Merge branch 'legacy-isa-delete' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Paul Gortmaker says:
====================
The Ethernet-HowTo was maintained for roughly 10 years, from 1993 to 2003.
Fortunately sane hardware probing and auto detection (via PCI and ISA/PnP)
largely made the document a relic of the past, hence it being abandoned
a decade ago.
However, there is one last useful thing that we can extract from the
effort made in maintaining that document. We can use it to guide us
with respect to what rare, experimental and/or super ancient 10Mbit
ISA drivers don't make sense to maintain in-tree anymore.
Nobody will argue that ISA is obsolete. Availability went away at about
the time Pentium3 motherboards moved from 500MHz Slot1/SECC processors
to the green 500MHz Socket 370 Pentium3 chips, at the turn of the century.
In theory, it is possible that someone could still be running one of these
12+ year old P3 machines and want 3.9+ bleeding edge kernels (but unlikely).
In light of the above (remote) possibility, we can defer the removal of some
ISA network drivers that were highly popular and well tested. Typically
that means the stuff more from the mid to late '90s, some with ISA PnP
support, like the 3c509, the wd/SMC 8390 based stuff, PCnet/lance etc.
But a lot of other drivers, typically from the early 1990s were for rare
hardware, and experimental (to the point of requiring a cron job that would
do a test ping, and then ifconfig down/up and/or a rmmod/insmod!). And
some of these drivers (znet, and lp486e to name two) are physically tied
to platforms with on motherboard ethernet -- of 486 machines that date
from the early 1990s and can only have single digit amounts of memory.
What I'd like to achieve here with this series, is to get rid of those old
drivers that are no longer being used. In an earlier discussion where
I'd proposed deleting a single driver, Alan suggested we instead dump
all the historical stuff in one go, to make it "...immediately obvious
where the break point is..."[1] and that it was "perfectly reasonable it
(and a pile of other ISA cards) ought to be shown the door"[2]. So that
is the goal here - make a clear line in the sand where the really ancient
stuff finally gets kicked to the curb.
Two old parallel port drivers are considered for removal here as well,
since in early 386/486 ISA machines, the parallel port was typically found
with the UARTS on the multi-I/O ISA controller card. These drivers also date
from the early 1990's; parallel ports are no longer found on modern boards,
and their performance was not even capable of 10% of 10Mbit bandwidth.
Allow me a preemptive justification against the inevitable comments from
well meaning bystanders who suggest "why not just leave all this alone?".
Dead drivers cost us all if they are left in tree. If you think that
is false, then please first consider:
-every time you type "git status", you are checking to see if modifications
have been made by you to all that dead code.
-every time you type "git grep <regex>" you are searching through files
which contain that dead code that simply does not interest you.
-every time you build a "allyesconfig" and an "allmodconfig" (don't tell
me you skip this step before submitting your changes to a maintainer),
you waste CPU cycles building this dead code.
-every time there is a tree wide API change, or cleanup, or file relocation,
we pay the cost of updating dead code, or moving dead code.
-daily regression tests (take linux-next as the most transparent
example) spend time building (and possibly running) this dead code.
-hard working people who regularly run auditing tools looking for lurking
bugs (sparse/coverity/smatch/coccinelle) are wasting time checking for,
and fixing bugs in this dead code.
This last one is key. Please take a look at the git history for the
files that are proposed for removal here. Look at the git history for
any one of them ("git whatchanged --follow drivers/net/.../driver.c")
Mentally sort the changes into two bins -- (1) the robotic tree-wide
changes, and (2) the "look I found a real run-time bug while using this"
category. You will see that category #2 is essentially empty.
Further to that, realize that drivers don't simply disappear. We are
not operating in the binary-only distribution space like other OS. All
these drivers remain in the git history forever. If a person is an
enthusiast for extreme legacy hardware, they are probably already
customizing their kernel source and building it themselves to support
such systems. Also keep in mind that they could still build the 3.8
kernel exactly as-is, and run it (or a 3.8.x stable variant of it) for
several more years if they were really determined to cling to these old
experimental ISA drivers for some reason.
In summary, I hope that folks can be pragmatic about this, and not
get swept up in nostalgia. Ask yourself whether it is realistic to
expect a person would have a genuine use case where they would
need to build a 3.9+ modern kernel and install it on some legacy hardware
that has no option but to absolutely _require_ one of the drivers
that are deleted here.
The following series was created with --irreversible-delete for
ease of review (it skips showing the content of files that are
deleted); however the complete patches can be pulled as per below.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
58 files changed, 11 insertions, 24868 deletions
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 1abfff2..258d9b9 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -52,8 +52,6 @@ de4x5.txt - the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver decnet.txt - info on using the DECnet networking layer in Linux. -depca.txt - - the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver dl2k.txt - README for D-Link DL2000-based Gigabit Ethernet Adapters (dl2k.ko). dm9000.txt @@ -72,8 +70,6 @@ e1000e.txt - README for the Intel Gigabit Ethernet Driver (e1000e). eql.txt - serial IP load balancing -ewrk3.txt - - the Digital EtherWORKS 3 DE203/4/5 Ethernet driver fib_trie.txt - Level Compressed Trie (LC-trie) notes: a structure for routing. filter.txt diff --git a/Documentation/networking/DLINK.txt b/Documentation/networking/DLINK.txt deleted file mode 100644 index 55d2443..0000000 --- a/Documentation/networking/DLINK.txt +++ /dev/null @@ -1,203 +0,0 @@ -Released 1994-06-13 - - - CONTENTS: - - 1. Introduction. - 2. License. - 3. Files in this release. - 4. Installation. - 5. Problems and tuning. - 6. Using the drivers with earlier releases. - 7. Acknowledgments. - - - 1. INTRODUCTION. - - This is a set of Ethernet drivers for the D-Link DE-600/DE-620 - pocket adapters, for the parallel port on a Linux based machine. - Some adapter "clones" will also work. Xircom is _not_ a clone... - These drivers _can_ be used as loadable modules, - and were developed for use on Linux 1.1.13 and above. - For use on Linux 1.0.X, or earlier releases, see below. - - I have used these drivers for NFS, ftp, telnet and X-clients on - remote machines. Transmissions with ftp seems to work as - good as can be expected (i.e. > 80k bytes/sec) from a - parallel port...:-) Receive speeds will be about 60-80% of this. - Depending on your machine, somewhat higher speeds can be achieved. - - All comments/fixes to Bjorn Ekwall (bj0rn@blox.se). - - - 2. LICENSE. - - This program is free software; you can redistribute it - and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2, or (at your option) any later version. - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - PURPOSE. See the GNU General Public License for more - details. - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 675 Mass Ave, Cambridge, MA - 02139, USA. - - - 3. FILES IN THIS RELEASE. - - README.DLINK This file. - de600.c The Source (may it be with You :-) for the DE-600 - de620.c ditto for the DE-620 - de620.h Macros for de620.c - - If you are upgrading from the d-link tar release, there will - also be a "dlink-patches" file that will patch Linux 1.1.18: - linux/drivers/net/Makefile - linux/drivers/net/CONFIG - linux/drivers/net/MODULES - linux/drivers/net/Space.c - linux/config.in - Apply the patch by: - "cd /usr/src; patch -p0 < linux/drivers/net/dlink-patches" - The old source, "linux/drivers/net/d_link.c", can be removed. - - - 4. INSTALLATION. - - o Get the latest net binaries, according to current net.wisdom. - - o Read the NET-2 and Ethernet HOWTOs and modify your setup. - - o If your parallel port has a strange address or irq, - modify "linux/drivers/net/CONFIG" accordingly, or adjust - the parameters in the "tuning" section in the sources. - - If you are going to use the drivers as loadable modules, do _not_ - enable them while doing "make config", but instead make sure that - the drivers are included in "linux/drivers/net/MODULES". - - If you are _not_ going to use the driver(s) as loadable modules, - but instead have them included in the kernel, remember to enable - the drivers while doing "make config". - - o To include networking and DE600/DE620 support in your kernel: - # cd /linux - (as modules:) - # make config (answer yes on CONFIG_NET and CONFIG_INET) - (else included in the kernel:) - # make config (answer yes on CONFIG _NET, _INET and _DE600 or _DE620) - # make clean - # make zImage (or whatever magic you usually do) - - o I use lilo to boot multiple kernels, so that I at least - can have one working kernel :-). If you do too, append - these lines to /etc/lilo/config: - - image = /linux/zImage - label = newlinux - root = /dev/hda2 (or whatever YOU have...) - - # /etc/lilo/install - - o Do "sync" and reboot the new kernel with a D-Link - DE-600/DE-620 pocket adapter connected. - - o The adapter can be configured with ifconfig eth? - where the actual number is decided by the kernel - when the drivers are initialized. - - - 5. "PROBLEMS" AND TUNING, - - o If you see error messages from the driver, and if the traffic - stops on the adapter, try to do "ifconfig" and "route" once - more, just as in "rc.inet1". This should take care of most - problems, including effects from power loss, or adapters that - aren't connected to the printer port in some way or another. - You can somewhat change the behaviour by enabling/disabling - the macro SHUTDOWN_WHEN_LOST in the "tuning" section. - For the DE-600 there is another macro, CHECK_LOST_DE600, - that you might want to read about in the "tuning" section. - - o Some machines have trouble handling the parallel port and - the adapter at high speed. If you experience problems: - - DE-600: - - The adapter is not recognized at boot, i.e. an Ethernet - address of 00:80:c8:... is not shown, try to add another - "; SLOW_DOWN_IO" - at DE600_SLOW_DOWN in the "tuning" section. As a last resort, - uncomment: "#define REALLY_SLOW_IO" (see <asm/io.h> for hints). - - - You experience "timeout" messages: first try to add another - "; SLOW_DOWN_IO" - at DE600_SLOW_DOWN in the "tuning" section, _then_ try to - increase the value (original value: 5) at - "if (tickssofar < 5)" near line 422. - - DE-620: - - Your parallel port might be "sluggish". To cater for - this, there are the macros LOWSPEED and READ_DELAY/WRITE_DELAY - in the "tuning" section. Your first step should be to enable - LOWSPEED, and after that you can "tune" the XXX_DELAY values. - - o If the adapter _is_ recognized at boot but you get messages - about "Network Unreachable", then the problem is probably - _not_ with the driver. Check your net configuration instead - (ifconfig and route) in "rc.inet1". - - o There is some rudimentary support for debugging, look at - the source. Use "-DDE600_DEBUG=3" or "-DDE620_DEBUG=3" - when compiling, or include it in "linux/drivers/net/CONFIG". - IF YOU HAVE PROBLEMS YOU CAN'T SOLVE: PLEASE COMPILE THE DRIVER - WITH DEBUGGING ENABLED, AND SEND ME THE RESULTING OUTPUT! - - - 6. USING THE DRIVERS WITH EARLIER RELEASES. - - The later 1.1.X releases of the Linux kernel include some - changes in the networking layer (a.k.a. NET3). This affects - these drivers in a few places. The hints that follow are - _not_ tested by me, since I don't have the disk space to keep - all releases on-line. - Known needed changes to date: - - release patchfile: some patches will fail, but they should - be easy to apply "by hand", since they are trivial. - (Space.c: d_link_init() is now called de600_probe()) - - de600.c: change "mark_bh(NET_BH)" to "mark_bh(INET_BH)". - - de620.c: (maybe) change the code around "netif_rx(skb);" to be - similar to the code around "dev_rint(...)" in de600.c - - - 7. ACKNOWLEDGMENTS. - - These drivers wouldn't have been done without the base - (and support) from Ross Biro, and D-Link Systems Inc. - The driver relies upon GPL-ed source from D-Link Systems Inc. - and from Russel Nelson at Crynwr Software <nelson@crynwr.com>. - - Additional input also from: - Donald Becker <becker@super.org>, Alan Cox <A.Cox@swansea.ac.uk> - and Fred N. van Kempen <waltje@uWalt.NL.Mugnet.ORG> - - DE-600 alpha release primary victim^H^H^H^H^H^Htester: - - Erik Proper <erikp@cs.kun.nl>. - Good input also from several users, most notably - - Mark Burton <markb@ordern.demon.co.uk>. - - DE-620 alpha release victims^H^H^H^H^H^H^Htesters: - - J. Joshua Kopper <kopper@rtsg.mot.com> - - Olav Kvittem <Olav.Kvittem@uninett.no> - - Germano Caronni <caronni@nessie.cs.id.ethz.ch> - - Jeremy Fitzhardinge <jeremy@suite.sw.oz.au> - - - Happy hacking! - - Bjorn Ekwall == bj0rn@blox.se diff --git a/Documentation/networking/depca.txt b/Documentation/networking/depca.txt deleted file mode 100644 index 24c6b26..0000000 --- a/Documentation/networking/depca.txt +++ /dev/null @@ -1,92 +0,0 @@ - -DE10x -===== - -Memory Addresses: - - SW1 SW2 SW3 SW4 -64K on on on on d0000 dbfff - off on on on c0000 cbfff - off off on on e0000 ebfff - -32K on on off on d8000 dbfff - off on off on c8000 cbfff - off off off on e8000 ebfff - -DBR ROM on on dc000 dffff - off on cc000 cffff - off off ec000 effff - -Note that the 2K mode is set by SW3/SW4 on/off or off/off. Address -assignment is through the RBSA register. - -I/O Address: - SW5 -0x300 on -0x200 off - -Remote Boot: - SW6 -Disable on -Enable off - -Remote Boot Timeout: - SW7 -2.5min on -30s off - -IRQ: - SW8 SW9 SW10 SW11 SW12 -2 on off off off off -3 off on off off off -4 off off on off off -5 off off off on off -7 off off off off on - -DE20x -===== - -Memory Size: - - SW3 SW4 -64K on on -32K off on -2K on off -2K off off - -Start Addresses: - - SW1 SW2 SW3 SW4 -64K on on on on c0000 cffff - on off on on d0000 dffff - off on on on e0000 effff - -32K on on off off c8000 cffff - on off off off d8000 dffff - off on off off e8000 effff - -Illegal off off - - - - - -I/O Address: - SW5 -0x300 on -0x200 off - -Remote Boot: - SW6 -Disable on -Enable off - -Remote Boot Timeout: - SW7 -2.5min on -30s off - -IRQ: - SW8 SW9 SW10 SW11 SW12 -5 on off off off off -9 off on off off off -10 off off on off off -11 off off off on off -15 off off off off on - diff --git a/Documentation/networking/ewrk3.txt b/Documentation/networking/ewrk3.txt deleted file mode 100644 index 90e9e5f..0000000 --- a/Documentation/networking/ewrk3.txt +++ /dev/null @@ -1,46 +0,0 @@ -The EtherWORKS 3 driver in this distribution is designed to work with all -kernels > 1.1.33 (approx) and includes tools in the 'ewrk3tools' -subdirectory to allow set up of the card, similar to the MSDOS -'NICSETUP.EXE' tools provided on the DOS drivers disk (type 'make' in that -subdirectory to make the tools). - -The supported cards are DE203, DE204 and DE205. All other cards are NOT -supported - refer to 'depca.c' for running the LANCE based network cards and -'de4x5.c' for the DIGITAL Semiconductor PCI chip based adapters from -Digital. - -The ability to load this driver as a loadable module has been included and -used extensively during the driver development (to save those long reboot -sequences). To utilise this ability, you have to do 8 things: - - 0) have a copy of the loadable modules code installed on your system. - 1) copy ewrk3.c from the /linux/drivers/net directory to your favourite - temporary directory. - 2) edit the source code near line 1898 to reflect the I/O address and - IRQ you're using. - 3) compile ewrk3.c, but include -DMODULE in the command line to ensure - that the correct bits are compiled (see end of source code). - 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a - kernel with the ewrk3 configuration turned off and reboot. - 5) insmod ewrk3.o - [Alan Cox: Changed this so you can insmod ewrk3.o irq=x io=y] - [Adam Kropelin: Multiple cards now supported by irq=x1,x2 io=y1,y2] - 6) run the net startup bits for your new eth?? interface manually - (usually /etc/rc.inet[12] at boot time). - 7) enjoy! - - Note that autoprobing is not allowed in loadable modules - the system is - already up and running and you're messing with interrupts. - - To unload a module, turn off the associated interface - 'ifconfig eth?? down' then 'rmmod ewrk3'. - -The performance we've achieved so far has been measured through the 'ttcp' -tool at 975kB/s. This measures the total TCP stack performance which -includes the card, so don't expect to get much nearer the 1.25MB/s -theoretical Ethernet rate. - - -Enjoy! - -Dave diff --git a/MAINTAINERS b/MAINTAINERS index cd5b31f..a7aadea 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2974,11 +2974,6 @@ S: Maintained F: include/linux/netfilter_bridge/ F: net/bridge/ -ETHERTEAM 16I DRIVER -M: Mika Kuoppala <miku@iki.fi> -S: Maintained -F: drivers/net/ethernet/fujitsu/eth16i.c - EXT2 FILE SYSTEM M: Jan Kara <jack@suse.cz> L: linux-ext4@vger.kernel.org @@ -5370,13 +5365,6 @@ F: include/linux/sunrpc/ F: include/uapi/linux/nfs* F: include/uapi/linux/sunrpc/ -NI5010 NETWORK DRIVER -M: Jan-Pascal van Best <janpascal@vanbest.org> -M: Andreas Mohr <andi@lisas.de> -L: netdev@vger.kernel.org -S: Maintained -F: drivers/net/ethernet/racal/ni5010.* - NILFS2 FILESYSTEM M: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> L: linux-nilfs@vger.kernel.org diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 5637c26..3a8c753 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -40,26 +40,11 @@ extern struct net_device *hp100_probe(int unit); extern struct net_device *ultra_probe(int unit); extern struct net_device *wd_probe(int unit); -extern struct net_device *el2_probe(int unit); extern struct net_device *ne_probe(int unit); -extern struct net_device *hp_probe(int unit); -extern struct net_device *hp_plus_probe(int unit); -extern struct net_device *express_probe(int unit); -extern struct net_device *eepro_probe(int unit); -extern struct net_device *at1700_probe(int unit); extern struct net_device *fmv18x_probe(int unit); -extern struct net_device *eth16i_probe(int unit); extern struct net_device *i82596_probe(int unit); -extern struct net_device *ewrk3_probe(int unit); -extern struct net_device *el1_probe(int unit); -extern struct net_device *el16_probe(int unit); -extern struct net_device *elplus_probe(int unit); -extern struct net_device *e2100_probe(int unit); -extern struct net_device *ni5010_probe(int unit); -extern struct net_device *ni52_probe(int unit); extern struct net_device *ni65_probe(int unit); extern struct net_device *sonic_probe(int unit); -extern struct net_device *seeq8005_probe(int unit); extern struct net_device *smc_init(int unit); extern struct net_device *atarilance_probe(int unit); extern struct net_device *sun3lance_probe(int unit); @@ -74,9 +59,6 @@ extern struct net_device *mac89x0_probe(int unit); extern struct net_device *cops_probe(int unit); extern struct net_device *ltpc_probe(void); -/* Detachable devices ("pocket adaptors") */ -extern struct net_device *de620_probe(int unit); - /* Fibre Channel adapters */ extern int iph5526_probe(struct net_device *dev); @@ -120,18 +102,6 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_WD80x3 {wd_probe, 0}, #endif -#ifdef CONFIG_EL2 /* 3c503 */ - {el2_probe, 0}, -#endif -#ifdef CONFIG_HPLAN - {hp_probe, 0}, -#endif -#ifdef CONFIG_HPLAN_PLUS - {hp_plus_probe, 0}, -#endif -#ifdef CONFIG_E2100 /* Cabletron E21xx series. */ - {e2100_probe, 0}, -#endif #if defined(CONFIG_NE2000) || \ defined(CONFIG_NE_H8300) /* ISA (use ne2k-pci for PCI cards) */ {ne_probe, 0}, @@ -142,60 +112,20 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_SMC9194 {smc_init, 0}, #endif -#ifdef CONFIG_SEEQ8005 - {seeq8005_probe, 0}, -#endif #ifdef CONFIG_CS89x0 #ifndef CONFIG_CS89x0_PLATFORM {cs89x0_probe, 0}, #endif #endif -#ifdef CONFIG_AT1700 - {at1700_probe, 0}, -#endif -#ifdef CONFIG_ETH16I - {eth16i_probe, 0}, /* ICL EtherTeam 16i/32 */ -#endif -#ifdef CONFIG_EEXPRESS /* Intel EtherExpress */ - {express_probe, 0}, -#endif -#ifdef CONFIG_EEXPRESS_PRO /* Intel EtherExpress Pro/10 */ - {eepro_probe, 0}, -#endif -#ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */ - {ewrk3_probe, 0}, -#endif -#if defined(CONFIG_APRICOT) || defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel I82596 */ +#if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel I82596 */ {i82596_probe, 0}, #endif -#ifdef CONFIG_EL1 /* 3c501 */ - {el1_probe, 0}, -#endif -#ifdef CONFIG_EL16 /* 3c507 */ - {el16_probe, 0}, -#endif -#ifdef CONFIG_ELPLUS /* 3c505 */ - {elplus_probe, 0}, -#endif -#ifdef CONFIG_NI5010 - {ni5010_probe, 0}, -#endif -#ifdef CONFIG_NI52 - {ni52_probe, 0}, -#endif #ifdef CONFIG_NI65 {ni65_probe, 0}, #endif {NULL, 0}, }; -static struct devprobe2 parport_probes[] __initdata = { -#ifdef CONFIG_DE620 /* D-Link DE-620 adapter */ - {de620_probe, 0}, -#endif - {NULL, 0}, -}; - static struct devprobe2 m68k_probes[] __initdata = { #ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */ {atarilance_probe, 0}, @@ -234,8 +164,7 @@ static void __init ethif_probe2(int unit) return; (void)( probe_list2(unit, m68k_probes, base_addr == 0) && - probe_list2(unit, isa_probes, base_addr == 0) && - probe_list2(unit, parport_probes, base_addr == 0)); + probe_list2(unit, isa_probes, base_addr == 0)); } /* Statically configured drivers -- order matters here. */ diff --git a/drivers/net/ethernet/3com/3c501.c b/drivers/net/ethernet/3com/3c501.c deleted file mode 100644 index 9abd9a7..0000000 --- a/drivers/net/ethernet/3com/3c501.c +++ /dev/null @@ -1,897 +0,0 @@ -/* 3c501.c: A 3Com 3c501 Ethernet driver for Linux. */ -/* - Written 1992,1993,1994 Donald Becker - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. This software may be used and - distributed according to the terms of the GNU General Public License, - incorporated herein by reference. - - This is a device driver for the 3Com Etherlink 3c501. - Do not purchase this card, even as a joke. It's performance is horrible, - and it breaks in many ways. - - The original author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - Fixed (again!) the missing interrupt locking on TX/RX shifting. - Alan Cox <alan@lxorguk.ukuu.org.uk> - - Removed calls to init_etherdev since they are no longer needed, and - cleaned up modularization just a bit. The driver still allows only - the default address for cards when loaded as a module, but that's - really less braindead than anyone using a 3c501 board. :) - 19950208 (invid@msen.com) - - Added traps for interrupts hitting the window as we clear and TX load - the board. Now getting 150K/second FTP with a 3c501 card. Still playing - with a TX-TX optimisation to see if we can touch 180-200K/second as seems - theoretically maximum. - 19950402 Alan Cox <alan@lxorguk.ukuu.org.uk> - - Cleaned up for 2.3.x because we broke SMP now. - 20000208 Alan Cox <alan@lxorguk.ukuu.org.uk> - - Check up pass for 2.5. Nothing significant changed - 20021009 Alan Cox <alan@lxorguk.ukuu.org.uk> - - Fixed zero fill corner case - 20030104 Alan Cox <alan@lxorguk.ukuu.org.uk> - - - For the avoidance of doubt the "preferred form" of this code is one which - is in an open non patent encumbered format. Where cryptographic key signing - forms part of the process of creating an executable the information - including keys needed to generate an equivalently functional executable - are deemed to be part of the source code. - -*/ - - -/** - * DOC: 3c501 Card Notes - * - * Some notes on this thing if you have to hack it. [Alan] - * - * Some documentation is available from 3Com. Due to the boards age - * standard responses when you ask for this will range from 'be serious' - * to 'give it to a museum'. The documentation is incomplete and mostly - * of historical interest anyway. - * - * The basic system is a single buffer which can be used to receive or - * transmit a packet. A third command mode exists when you are setting - * things up. - * - * If it's transmitting it's not receiving and vice versa. In fact the - * time to get the board back into useful state after an operation is - * quite large. - * - * The driver works by keeping the board in receive mode waiting for a - * packet to arrive. When one arrives it is copied out of the buffer - * and delivered to the kernel. The card is reloaded and off we go. - * - * When transmitting lp->txing is set and the card is reset (from - * receive mode) [possibly losing a packet just received] to command - * mode. A packet is loaded and transmit mode triggered. The interrupt - * handler runs different code for transmit interrupts and can handle - * returning to receive mode or retransmissions (yes you have to help - * out with those too). - * - * DOC: Problems - * - * There are a wide variety of undocumented error returns from the card - * and you basically have to kick the board and pray if they turn up. Most - * only occur under extreme load or if you do something the board doesn't - * like (eg touching a register at the wrong time). - * - * The driver is less efficient than it could be. It switches through - * receive mode even if more transmits are queued. If this worries you buy - * a real Ethernet card. - * - * The combination of slow receive restart and no real multicast - * filter makes the board unusable with a kernel compiled for IP - * multicasting in a real multicast environment. That's down to the board, - * but even with no multicast programs running a multicast IP kernel is - * in group 224.0.0.1 and you will therefore be listening to all multicasts. - * One nv conference running over that Ethernet and you can give up. - * - */ - -#define DRV_NAME "3c501" -#define DRV_VERSION "2002/10/09" - - -static const char version[] = - DRV_NAME ".c: " DRV_VERSION " Alan Cox (alan@lxorguk.ukuu.org.uk).\n"; - -/* - * Braindamage remaining: - * The 3c501 board. - */ - -#include <linux/module.h> - -#include <linux/kernel.h> -#include <linux/fcntl.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/spinlock.h> -#include <linux/ethtool.h> -#include <linux/delay.h> -#include <linux/bitops.h> - -#include <asm/uaccess.h> -#include <asm/io.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/init.h> - -#include "3c501.h" - -/* - * The boilerplate probe code. - */ - -static int io = 0x280; -static int irq = 5; -static int mem_start; - -/** - * el1_probe - probe for a 3c501 - * @dev: The device structure passed in to probe. - * - * This can be called from two places. The network layer will probe using - * a device structure passed in with the probe information completed. For a - * modular driver we use #init_module to fill in our own structure and probe - * for it. - * - * Returns 0 on success. ENXIO if asked not to probe and ENODEV if asked to - * probe and failing to find anything. - */ - -struct net_device * __init el1_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - static const unsigned ports[] = { 0x280, 0x300, 0}; - const unsigned *port; - int err = 0; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - mem_start = dev->mem_start & 7; - } - - if (io > 0x1ff) { /* Check a single specified location. */ - err = el1_probe1(dev, io); - } else if (io != 0) { - err = -ENXIO; /* Don't probe at all. */ - } else { - for (port = ports; *port && el1_probe1(dev, *port); port++) - ; - if (!*port) - err = -ENODEV; - } - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - release_region(dev->base_addr, EL1_IO_EXTENT); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static const struct net_device_ops el_netdev_ops = { - .ndo_open = el_open, - .ndo_stop = el1_close, - .ndo_start_xmit = el_start_xmit, - .ndo_tx_timeout = el_timeout, - .ndo_set_rx_mode = set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/** - * el1_probe1: - * @dev: The device structure to use - * @ioaddr: An I/O address to probe at. - * - * The actual probe. This is iterated over by #el1_probe in order to - * check all the applicable device locations. - * - * Returns 0 for a success, in which case the device is activated, - * EAGAIN if the IRQ is in use by another driver, and ENODEV if the - * board cannot be found. - */ - -static int __init el1_probe1(struct net_device *dev, int ioaddr) -{ - struct net_local *lp; - const char *mname; /* Vendor name */ - unsigned char station_addr[6]; - int autoirq = 0; - int i; - - /* - * Reserve I/O resource for exclusive use by this driver - */ - - if (!request_region(ioaddr, EL1_IO_EXTENT, DRV_NAME)) - return -ENODEV; - - /* - * Read the station address PROM data from the special port. - */ - - for (i = 0; i < 6; i++) { - outw(i, ioaddr + EL1_DATAPTR); - station_addr[i] = inb(ioaddr + EL1_SAPROM); - } - /* - * Check the first three octets of the S.A. for 3Com's prefix, or - * for the Sager NP943 prefix. - */ - - if (station_addr[0] == 0x02 && station_addr[1] == 0x60 && - station_addr[2] == 0x8c) - mname = "3c501"; - else if (station_addr[0] == 0x00 && station_addr[1] == 0x80 && - station_addr[2] == 0xC8) - mname = "NP943"; - else { - release_region(ioaddr, EL1_IO_EXTENT); - return -ENODEV; - } - - /* - * We auto-IRQ by shutting off the interrupt line and letting it - * float high. - */ - - dev->irq = irq; - - if (dev->irq < 2) { - unsigned long irq_mask; - - irq_mask = probe_irq_on(); - inb(RX_STATUS); /* Clear pending interrupts. */ - inb(TX_STATUS); - outb(AX_LOOP + 1, AX_CMD); - - outb(0x00, AX_CMD); - - mdelay(20); - autoirq = probe_irq_off(irq_mask); - - if (autoirq == 0) { - pr_warning("%s probe at %#x failed to detect IRQ line.\n", - mname, ioaddr); - release_region(ioaddr, EL1_IO_EXTENT); - return -EAGAIN; - } - } - - outb(AX_RESET+AX_LOOP, AX_CMD); /* Loopback mode. */ - dev->base_addr = ioaddr; - memcpy(dev->dev_addr, station_addr, ETH_ALEN); - - if (mem_start & 0xf) - el_debug = mem_start & 0x7; - if (autoirq) - dev->irq = autoirq; - - pr_info("%s: %s EtherLink at %#lx, using %sIRQ %d.\n", - dev->name, mname, dev->base_addr, - autoirq ? "auto":"assigned ", dev->irq); - -#ifdef CONFIG_IP_MULTICAST - pr_warning("WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n"); -#endif - - if (el_debug) - pr_debug("%s", version); - - lp = netdev_priv(dev); - memset(lp, 0, sizeof(struct net_local)); - spin_lock_init(&lp->lock); - - /* - * The EL1-specific entries in the device structure. - */ - - dev->netdev_ops = &el_netdev_ops; - dev->watchdog_timeo = HZ; - dev->ethtool_ops = &netdev_ethtool_ops; - return 0; -} - -/** - * el1_open: - * @dev: device that is being opened - * - * When an ifconfig is issued which changes the device flags to include - * IFF_UP this function is called. It is only called when the change - * occurs, not when the interface remains up. #el1_close will be called - * when it goes down. - * - * Returns 0 for a successful open, or -EAGAIN if someone has run off - * with our interrupt line. - */ - -static int el_open(struct net_device *dev) -{ - int retval; - int ioaddr = dev->base_addr; - struct net_local *lp = netdev_priv(dev); - unsigned long flags; - - if (el_debug > 2) - pr_debug("%s: Doing el_open()...\n", dev->name); - - retval = request_irq(dev->irq, el_interrupt, 0, dev->name, dev); - if (retval) - return retval; - - spin_lock_irqsave(&lp->lock, flags); - el_reset(dev); - spin_unlock_irqrestore(&lp->lock, flags); - - lp->txing = 0; /* Board in RX mode */ - outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */ - netif_start_queue(dev); - return 0; -} - -/** - * el_timeout: - * @dev: The 3c501 card that has timed out - * - * Attempt to restart the board. This is basically a mixture of extreme - * violence and prayer - * - */ - -static void el_timeout(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - if (el_debug) - pr_debug("%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n", - dev->name, inb(TX_STATUS), - inb(AX_STATUS), inb(RX_STATUS)); - dev->stats.tx_errors++; - outb(TX_NORM, TX_CMD); - outb(RX_NORM, RX_CMD); - outb(AX_OFF, AX_CMD); /* Just trigger a false interrupt. */ - outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */ - lp->txing = 0; /* Ripped back in to RX */ - netif_wake_queue(dev); -} - - -/** - * el_start_xmit: - * @skb: The packet that is queued to be sent - * @dev: The 3c501 card we want to throw it down - * - * Attempt to send a packet to a 3c501 card. There are some interesting - * catches here because the 3c501 is an extremely old and therefore - * stupid piece of technology. - * - * If we are handling an interrupt on the other CPU we cannot load a packet - * as we may still be attempting to retrieve the last RX packet buffer. - * - * When a transmit times out we dump the card into control mode and just - * start again. It happens enough that it isn't worth logging. - * - * We avoid holding the spin locks when doing the packet load to the board. - * The device is very slow, and its DMA mode is even slower. If we held the - * lock while loading 1500 bytes onto the controller we would drop a lot of - * serial port characters. This requires we do extra locking, but we have - * no real choice. - */ - -static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - unsigned long flags; - - /* - * Avoid incoming interrupts between us flipping txing and flipping - * mode as the driver assumes txing is a faithful indicator of card - * state - */ - - spin_lock_irqsave(&lp->lock, flags); - - /* - * Avoid timer-based retransmission conflicts. - */ - - netif_stop_queue(dev); - - do { - int len = skb->len; - int pad = 0; - int gp_start; - unsigned char *buf = skb->data; - - if (len < ETH_ZLEN) - pad = ETH_ZLEN - len; - - gp_start = 0x800 - (len + pad); - - lp->tx_pkt_start = gp_start; - lp->collisions = 0; - - dev->stats.tx_bytes += skb->len; - - /* - * Command mode with status cleared should [in theory] - * mean no more interrupts can be pending on the card. - */ - - outb_p(AX_SYS, AX_CMD); - inb_p(RX_STATUS); - inb_p(TX_STATUS); - - lp->loading = 1; - lp->txing = 1; - - /* - * Turn interrupts back on while we spend a pleasant - * afternoon loading bytes into the board - */ - - spin_unlock_irqrestore(&lp->lock, flags); - - /* Set rx packet area to 0. */ - outw(0x00, RX_BUF_CLR); - /* aim - packet will be loaded into buffer start */ - outw(gp_start, GP_LOW); - /* load buffer (usual thing each byte increments the pointer) */ - outsb(DATAPORT, buf, len); - if (pad) { - while (pad--) /* Zero fill buffer tail */ - outb(0, DATAPORT); - } - /* the board reuses the same register */ - outw(gp_start, GP_LOW); - - if (lp->loading != 2) { - /* fire ... Trigger xmit. */ - outb(AX_XMIT, AX_CMD); - lp->loading = 0; - if (el_debug > 2) - pr_debug(" queued xmit.\n"); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - /* A receive upset our load, despite our best efforts */ - if (el_debug > 2) - pr_debug("%s: burped during tx load.\n", dev->name); - spin_lock_irqsave(&lp->lock, flags); - } while (1); -} - -/** - * el_interrupt: - * @irq: Interrupt number - * @dev_id: The 3c501 that burped - * - * Handle the ether interface interrupts. The 3c501 needs a lot more - * hand holding than most cards. In particular we get a transmit interrupt - * with a collision error because the board firmware isn't capable of rewinding - * its own transmit buffer pointers. It can however count to 16 for us. - * - * On the receive side the card is also very dumb. It has no buffering to - * speak of. We simply pull the packet out of its PIO buffer (which is slow) - * and queue it for the kernel. Then we reset the card for the next packet. - * - * We sometimes get surprise interrupts late both because the SMP IRQ delivery - * is message passing and because the card sometimes seems to deliver late. I - * think if it is part way through a receive and the mode is changed it carries - * on receiving and sends us an interrupt. We have to band aid all these cases - * to get a sensible 150kBytes/second performance. Even then you want a small - * TCP window. - */ - -static irqreturn_t el_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr; - int axsr; /* Aux. status reg. */ - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - - spin_lock(&lp->lock); - - /* - * What happened ? - */ - - axsr = inb(AX_STATUS); - - /* - * Log it - */ - - if (el_debug > 3) - pr_debug("%s: el_interrupt() aux=%#02x\n", dev->name, axsr); - - if (lp->loading == 1 && !lp->txing) - pr_warning("%s: Inconsistent state loading while not in tx\n", - dev->name); - - if (lp->txing) { - /* - * Board in transmit mode. May be loading. If we are - * loading we shouldn't have got this. - */ - int txsr = inb(TX_STATUS); - - if (lp->loading == 1) { - if (el_debug > 2) - pr_debug("%s: Interrupt while loading [txsr=%02x gp=%04x rp=%04x]\n", - dev->name, txsr, inw(GP_LOW), inw(RX_LOW)); - - /* Force a reload */ - lp->loading = 2; - spin_unlock(&lp->lock); - goto out; - } - if (el_debug > 6) - pr_debug("%s: txsr=%02x gp=%04x rp=%04x\n", dev->name, - txsr, inw(GP_LOW), inw(RX_LOW)); - - if ((axsr & 0x80) && (txsr & TX_READY) == 0) { - /* - * FIXME: is there a logic to whether to keep - * on trying or reset immediately ? - */ - if (el_debug > 1) - pr_debug("%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n", - dev->name, txsr, axsr, - inw(ioaddr + EL1_DATAPTR), - inw(ioaddr + EL1_RXPTR)); - lp->txing = 0; - netif_wake_queue(dev); - } else if (txsr & TX_16COLLISIONS) { - /* - * Timed out - */ - if (el_debug) - pr_debug("%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name); - outb(AX_SYS, AX_CMD); - lp->txing = 0; - dev->stats.tx_aborted_errors++; - netif_wake_queue(dev); - } else if (txsr & TX_COLLISION) { - /* - * Retrigger xmit. - */ - - if (el_debug > 6) - pr_debug("%s: retransmitting after a collision.\n", dev->name); - /* - * Poor little chip can't reset its own start - * pointer - */ - - outb(AX_SYS, AX_CMD); - outw(lp->tx_pkt_start, GP_LOW); - outb(AX_XMIT, AX_CMD); - dev->stats.collisions++; - spin_unlock(&lp->lock); - goto out; - } else { - /* - * It worked.. we will now fall through and receive - */ - dev->stats.tx_packets++; - if (el_debug > 6) - pr_debug("%s: Tx succeeded %s\n", dev->name, - (txsr & TX_RDY) ? "." : "but tx is busy!"); - /* - * This is safe the interrupt is atomic WRT itself. - */ - lp->txing = 0; - /* In case more to transmit */ - netif_wake_queue(dev); - } - } else { - /* - * In receive mode. - */ - - int rxsr = inb(RX_STATUS); - if (el_debug > 5) - pr_debug("%s: rxsr=%02x txsr=%02x rp=%04x\n", - dev->name, rxsr, inb(TX_STATUS), inw(RX_LOW)); - /* - * Just reading rx_status fixes most errors. - */ - if (rxsr & RX_MISSED) - dev->stats.rx_missed_errors++; - else if (rxsr & RX_RUNT) { - /* Handled to avoid board lock-up. */ - dev->stats.rx_length_errors++; - if (el_debug > 5) - pr_debug("%s: runt.\n", dev->name); - } else if (rxsr & RX_GOOD) { - /* - * Receive worked. - */ - el_receive(dev); - } else { - /* - * Nothing? Something is broken! - */ - if (el_debug > 2) - pr_debug("%s: No packet seen, rxsr=%02x **resetting 3c501***\n", - dev->name, rxsr); - el_reset(dev); - } - } - - /* - * Move into receive mode - */ - - outb(AX_RX, AX_CMD); - outw(0x00, RX_BUF_CLR); - inb(RX_STATUS); /* Be certain that interrupts are cleared. */ - inb(TX_STATUS); - spin_unlock(&lp->lock); -out: - return IRQ_HANDLED; -} - - -/** - * el_receive: - * @dev: Device to pull the packets from - * - * We have a good packet. Well, not really "good", just mostly not broken. - * We must check everything to see if it is good. In particular we occasionally - * get wild packet sizes from the card. If the packet seems sane we PIO it - * off the card and queue it for the protocol layers. - */ - -static void el_receive(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - int pkt_len; - struct sk_buff *skb; - - pkt_len = inw(RX_LOW); - - if (el_debug > 4) - pr_debug(" el_receive %d.\n", pkt_len); - - if (pkt_len < 60 || pkt_len > 1536) { - if (el_debug) - pr_debug("%s: bogus packet, length=%d\n", - dev->name, pkt_len); - dev->stats.rx_over_errors++; - return; - } - - /* - * Command mode so we can empty the buffer - */ - - outb(AX_SYS, AX_CMD); - skb = netdev_alloc_skb(dev, pkt_len + 2); - - /* - * Start of frame - */ - - outw(0x00, GP_LOW); - if (skb == NULL) { - pr_info("%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - return; - } else { - skb_reserve(skb, 2); /* Force 16 byte alignment */ - /* - * The read increments through the bytes. The interrupt - * handler will fix the pointer when it returns to - * receive mode. - */ - insb(DATAPORT, skb_put(skb, pkt_len), pkt_len); - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } -} - -/** - * el_reset: Reset a 3c501 card - * @dev: The 3c501 card about to get zapped - * - * Even resetting a 3c501 isn't simple. When you activate reset it loses all - * its configuration. You must hold the lock when doing this. The function - * cannot take the lock itself as it is callable from the irq handler. - */ - -static void el_reset(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - if (el_debug > 2) - pr_info("3c501 reset...\n"); - outb(AX_RESET, AX_CMD); /* Reset the chip */ - /* Aux control, irq and loopback enabled */ - outb(AX_LOOP, AX_CMD); - { - int i; - for (i = 0; i < 6; i++) /* Set the station address. */ - outb(dev->dev_addr[i], ioaddr + i); - } - - outw(0, RX_BUF_CLR); /* Set rx packet area to 0. */ - outb(TX_NORM, TX_CMD); /* tx irq on done, collision */ - outb(RX_NORM, RX_CMD); /* Set Rx commands. */ - inb(RX_STATUS); /* Clear status. */ - inb(TX_STATUS); - lp->txing = 0; -} - -/** - * el1_close: - * @dev: 3c501 card to shut down - * - * Close a 3c501 card. The IFF_UP flag has been cleared by the user via - * the SIOCSIFFLAGS ioctl. We stop any further transmissions being queued, - * and then disable the interrupts. Finally we reset the chip. The effects - * of the rest will be cleaned up by #el1_open. Always returns 0 indicating - * a success. - */ - -static int el1_close(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - if (el_debug > 2) - pr_info("%s: Shutting down Ethernet card at %#x.\n", - dev->name, ioaddr); - - netif_stop_queue(dev); - - /* - * Free and disable the IRQ. - */ - - free_irq(dev->irq, dev); - outb(AX_RESET, AX_CMD); /* Reset the chip */ - - return 0; -} - -/** - * set_multicast_list: - * @dev: The device to adjust - * - * Set or clear the multicast filter for this adaptor to use the best-effort - * filtering supported. The 3c501 supports only three modes of filtering. - * It always receives broadcasts and packets for itself. You can choose to - * optionally receive all packets, or all multicast packets on top of this. - */ - -static void set_multicast_list(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - if (dev->flags & IFF_PROMISC) { - outb(RX_PROM, RX_CMD); - inb(RX_STATUS); - } else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) { - /* Multicast or all multicast is the same */ - outb(RX_MULT, RX_CMD); - inb(RX_STATUS); /* Clear status. */ - } else { - outb(RX_NORM, RX_CMD); - inb(RX_STATUS); - } -} - - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); - strlcpy(info->version, DRV_VERSION, sizeof(info->version)); - snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", - dev->base_addr); -} - -static u32 netdev_get_msglevel(struct net_device *dev) -{ - return debug; -} - -static void netdev_set_msglevel(struct net_device *dev, u32 level) -{ - debug = level; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, - .get_msglevel = netdev_get_msglevel, - .set_msglevel = netdev_set_msglevel, -}; - -#ifdef MODULE - -static struct net_device *dev_3c501; - -module_param(io, int, 0); -module_param(irq, int, 0); -MODULE_PARM_DESC(io, "EtherLink I/O base address"); -MODULE_PARM_DESC(irq, "EtherLink IRQ number"); - -/** - * init_module: - * - * When the driver is loaded as a module this function is called. We fake up - * a device structure with the base I/O and interrupt set as if it were being - * called from Space.c. This minimises the extra code that would otherwise - * be required. - * - * Returns 0 for success or -EIO if a card is not found. Returning an error - * here also causes the module to be unloaded - */ - -int __init init_module(void) -{ - dev_3c501 = el1_probe(-1); - if (IS_ERR(dev_3c501)) - return PTR_ERR(dev_3c501); - return 0; -} - -/** - * cleanup_module: - * - * The module is being unloaded. We unhook our network device from the system - * and then free up the resources we took when the card was found. - */ - -void __exit cleanup_module(void) -{ - struct net_device *dev = dev_3c501; - unregister_netdev(dev); - release_region(dev->base_addr, EL1_IO_EXTENT); - free_netdev(dev); -} - -#endif /* MODULE */ - -MODULE_AUTHOR("Donald Becker, Alan Cox"); -MODULE_DESCRIPTION("Support for the ancient 3Com 3c501 ethernet card"); -MODULE_LICENSE("GPL"); - diff --git a/drivers/net/ethernet/3com/3c501.h b/drivers/net/ethernet/3com/3c501.h deleted file mode 100644 index 183fd55..0000000 --- a/drivers/net/ethernet/3com/3c501.h +++ /dev/null @@ -1,91 +0,0 @@ - -/* - * Index to functions. - */ - -static int el1_probe1(struct net_device *dev, int ioaddr); -static int el_open(struct net_device *dev); -static void el_timeout(struct net_device *dev); -static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t el_interrupt(int irq, void *dev_id); -static void el_receive(struct net_device *dev); -static void el_reset(struct net_device *dev); -static int el1_close(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); -static const struct ethtool_ops netdev_ethtool_ops; - -#define EL1_IO_EXTENT 16 - -#ifndef EL_DEBUG -#define EL_DEBUG 0 /* use 0 for production, 1 for devel., >2 for debug */ -#endif /* Anything above 5 is wordy death! */ -#define debug el_debug -static int el_debug = EL_DEBUG; - -/* - * Board-specific info in netdev_priv(dev). - */ - -struct net_local -{ - int tx_pkt_start; /* The length of the current Tx packet. */ - int collisions; /* Tx collisions this packet */ - int loading; /* Spot buffer load collisions */ - int txing; /* True if card is in TX mode */ - spinlock_t lock; /* Serializing lock */ -}; - - -#define RX_STATUS (ioaddr + 0x06) -#define RX_CMD RX_STATUS -#define TX_STATUS (ioaddr + 0x07) -#define TX_CMD TX_STATUS -#define GP_LOW (ioaddr + 0x08) -#define GP_HIGH (ioaddr + 0x09) -#define RX_BUF_CLR (ioaddr + 0x0A) -#define RX_LOW (ioaddr + 0x0A) -#define RX_HIGH (ioaddr + 0x0B) -#define SAPROM (ioaddr + 0x0C) -#define AX_STATUS (ioaddr + 0x0E) -#define AX_CMD AX_STATUS -#define DATAPORT (ioaddr + 0x0F) -#define TX_RDY 0x08 /* In TX_STATUS */ - -#define EL1_DATAPTR 0x08 -#define EL1_RXPTR 0x0A -#define EL1_SAPROM 0x0C -#define EL1_DATAPORT 0x0f - -/* - * Writes to the ax command register. - */ - -#define AX_OFF 0x00 /* Irq off, buffer access on */ -#define AX_SYS 0x40 /* Load the buffer */ -#define AX_XMIT 0x44 /* Transmit a packet */ -#define AX_RX 0x48 /* Receive a packet */ -#define AX_LOOP 0x0C /* Loopback mode */ -#define AX_RESET 0x80 - -/* - * Normal receive mode written to RX_STATUS. We must intr on short packets - * to avoid bogus rx lockups. - */ - -#define RX_NORM 0xA8 /* 0x68 == all addrs, 0xA8 only to me. */ -#define RX_PROM 0x68 /* Senior Prom, uhmm promiscuous mode. */ -#define RX_MULT 0xE8 /* Accept multicast packets. */ -#define TX_NORM 0x0A /* Interrupt on everything that might hang the chip */ - -/* - * TX_STATUS register. - */ - -#define TX_COLLISION 0x02 -#define TX_16COLLISIONS 0x04 -#define TX_READY 0x08 - -#define RX_RUNT 0x08 -#define RX_MISSED 0x01 /* Missed a packet due to 3c501 braindamage. */ -#define RX_GOOD 0x30 /* Good packet 0x20, or simple overflow 0x10. */ - diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig index 8c417ed..1c71c76 100644 --- a/drivers/net/ethernet/3com/Kconfig +++ b/drivers/net/ethernet/3com/Kconfig @@ -18,20 +18,6 @@ config NET_VENDOR_3COM if NET_VENDOR_3COM -config EL1 - tristate "3c501 \"EtherLink\" support" - depends on ISA - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. Also, consider buying a - new card, since the 3c501 is slow, broken, and obsolete: you will - have problems. Some people suggest to ping ("man ping") a nearby - machine every minute ("man cron") when using this card. - - To compile this driver as a module, choose M here. The module - will be called 3c501. - config EL3 tristate "3c509/3c579 \"EtherLink III\" support" depends on (ISA || EISA) diff --git a/drivers/net/ethernet/3com/Makefile b/drivers/net/ethernet/3com/Makefile index 1e5382a..74046af 100644 --- a/drivers/net/ethernet/3com/Makefile +++ b/drivers/net/ethernet/3com/Makefile @@ -2,7 +2,6 @@ # Makefile for the 3Com Ethernet device drivers # -obj-$(CONFIG_EL1) += 3c501.o obj-$(CONFIG_EL3) += 3c509.o obj-$(CONFIG_3C515) += 3c515.o obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o diff --git a/drivers/net/ethernet/8390/3c503.c b/drivers/net/ethernet/8390/3c503.c deleted file mode 100644 index 0e9afe7..0000000 --- a/drivers/net/ethernet/8390/3c503.c +++ /dev/null @@ -1,778 +0,0 @@ -/* 3c503.c: A shared-memory NS8390 ethernet driver for linux. */ -/* - Written 1992-94 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. This software may be used and - distributed according to the terms of the GNU General Public License, - incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - - This driver should work with the 3c503 and 3c503/16. It should be used - in shared memory mode for best performance, although it may also work - in programmed-I/O mode. - - Sources: - EtherLink II Technical Reference Manual, - EtherLink II/16 Technical Reference Manual Supplement, - 3Com Corporation, 5400 Bayfront Plaza, Santa Clara CA 95052-8145 - - The Crynwr 3c503 packet driver. - - Changelog: - - Paul Gortmaker : add support for the 2nd 8kB of RAM on 16 bit cards. - Paul Gortmaker : multiple card support for module users. - rjohnson@analogic.com : Fix up PIO interface for efficient operation. - Jeff Garzik : ethtool support - -*/ - -#define DRV_NAME "3c503" -#define DRV_VERSION "1.10a" -#define DRV_RELDATE "11/17/2001" - - -static const char version[] = - DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Donald Becker (becker@scyld.com)\n"; - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/ethtool.h> - -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/byteorder.h> - -#include "8390.h" -#include "3c503.h" -#define WRD_COUNT 4 - -static int el2_pio_probe(struct net_device *dev); -static int el2_probe1(struct net_device *dev, int ioaddr); - -/* A zero-terminated list of I/O addresses to be probed in PIO mode. */ -static unsigned int netcard_portlist[] __initdata = - { 0x300,0x310,0x330,0x350,0x250,0x280,0x2a0,0x2e0,0}; - -#define EL2_IO_EXTENT 16 - -static int el2_open(struct net_device *dev); -static int el2_close(struct net_device *dev); -static void el2_reset_8390(struct net_device *dev); -static void el2_init_card(struct net_device *dev); -static void el2_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); -static void el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, - int ring_offset); -static void el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static const struct ethtool_ops netdev_ethtool_ops; - - -/* This routine probes for a memory-mapped 3c503 board by looking for - the "location register" at the end of the jumpered boot PROM space. - This works even if a PROM isn't there. - - If the ethercard isn't found there is an optional probe for - ethercard jumpered to programmed-I/O mode. - */ -static int __init do_el2_probe(struct net_device *dev) -{ - int *addr, addrs[] = { 0xddffe, 0xd9ffe, 0xcdffe, 0xc9ffe, 0}; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return el2_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (addr = addrs; *addr; addr++) { - void __iomem *p = ioremap(*addr, 1); - unsigned base_bits; - int i; - - if (!p) - continue; - base_bits = readb(p); - iounmap(p); - i = ffs(base_bits) - 1; - if (i == -1 || base_bits != (1 << i)) - continue; - if (el2_probe1(dev, netcard_portlist[i]) == 0) - return 0; - dev->irq = irq; - } -#if ! defined(no_probe_nonshared_memory) - return el2_pio_probe(dev); -#else - return -ENODEV; -#endif -} - -/* Try all of the locations that aren't obviously empty. This touches - a lot of locations, and is much riskier than the code above. */ -static int __init -el2_pio_probe(struct net_device *dev) -{ - int i; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return el2_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (i = 0; netcard_portlist[i]; i++) { - if (el2_probe1(dev, netcard_portlist[i]) == 0) - return 0; - dev->irq = irq; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init el2_probe(int unit) -{ - struct net_device *dev = alloc_eip_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_el2_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops el2_netdev_ops = { - .ndo_open = el2_open, - .ndo_stop = el2_close, - - .ndo_start_xmit = eip_start_xmit, - .ndo_tx_timeout = eip_tx_timeout, - .ndo_get_stats = eip_get_stats, - .ndo_set_rx_mode = eip_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = eip_poll, -#endif -}; - -/* Probe for the Etherlink II card at I/O port base IOADDR, - returning non-zero on success. If found, set the station - address and memory parameters in DEVICE. */ -static int __init -el2_probe1(struct net_device *dev, int ioaddr) -{ - int i, iobase_reg, membase_reg, saved_406, wordlength, retval; - static unsigned version_printed; - unsigned long vendor_id; - - if (!request_region(ioaddr, EL2_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - if (!request_region(ioaddr + 0x400, 8, DRV_NAME)) { - retval = -EBUSY; - goto out; - } - - /* Reset and/or avoid any lurking NE2000 */ - if (inb(ioaddr + 0x408) == 0xff) { - mdelay(1); - retval = -ENODEV; - goto out1; - } - - /* We verify that it's a 3C503 board by checking the first three octets - of its ethernet address. */ - iobase_reg = inb(ioaddr+0x403); - membase_reg = inb(ioaddr+0x404); - /* ASIC location registers should be 0 or have only a single bit set. */ - if ((iobase_reg & (iobase_reg - 1)) || - (membase_reg & (membase_reg - 1))) { - retval = -ENODEV; - goto out1; - } - saved_406 = inb_p(ioaddr + 0x406); - outb_p(ECNTRL_RESET|ECNTRL_THIN, ioaddr + 0x406); /* Reset it... */ - outb_p(ECNTRL_THIN, ioaddr + 0x406); - /* Map the station addr PROM into the lower I/O ports. We now check - for both the old and new 3Com prefix */ - outb(ECNTRL_SAPROM|ECNTRL_THIN, ioaddr + 0x406); - vendor_id = inb(ioaddr)*0x10000 + inb(ioaddr + 1)*0x100 + inb(ioaddr + 2); - if ((vendor_id != OLD_3COM_ID) && (vendor_id != NEW_3COM_ID)) { - /* Restore the register we frobbed. */ - outb(saved_406, ioaddr + 0x406); - retval = -ENODEV; - goto out1; - } - - if (ei_debug && version_printed++ == 0) - pr_debug("%s", version); - - dev->base_addr = ioaddr; - - pr_info("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr); - - /* Retrieve and print the ethernet address. */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + i); - pr_cont("%pM", dev->dev_addr); - - /* Map the 8390 back into the window. */ - outb(ECNTRL_THIN, ioaddr + 0x406); - - /* Check for EL2/16 as described in tech. man. */ - outb_p(E8390_PAGE0, ioaddr + E8390_CMD); - outb_p(0, ioaddr + EN0_DCFG); - outb_p(E8390_PAGE2, ioaddr + E8390_CMD); - wordlength = inb_p(ioaddr + EN0_DCFG) & ENDCFG_WTS; - outb_p(E8390_PAGE0, ioaddr + E8390_CMD); - - /* Probe for, turn on and clear the board's shared memory. */ - if (ei_debug > 2) - pr_cont(" memory jumpers %2.2x ", membase_reg); - outb(EGACFR_NORM, ioaddr + 0x405); /* Enable RAM */ - - /* This should be probed for (or set via an ioctl()) at run-time. - Right now we use a sleazy hack to pass in the interface number - at boot-time via the low bits of the mem_end field. That value is - unused, and the low bits would be discarded even if it was used. */ -#if defined(EI8390_THICK) || defined(EL2_AUI) - ei_status.interface_num = 1; -#else - ei_status.interface_num = dev->mem_end & 0xf; -#endif - pr_cont(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex"); - - if ((membase_reg & 0xf0) == 0) { - dev->mem_start = 0; - ei_status.name = "3c503-PIO"; - ei_status.mem = NULL; - } else { - dev->mem_start = ((membase_reg & 0xc0) ? 0xD8000 : 0xC8000) + - ((membase_reg & 0xA0) ? 0x4000 : 0); -#define EL2_MEMSIZE (EL2_MB1_STOP_PG - EL2_MB1_START_PG)*256 - ei_status.mem = ioremap(dev->mem_start, EL2_MEMSIZE); - -#ifdef EL2MEMTEST - /* This has never found an error, but someone might care. - Note that it only tests the 2nd 8kB on 16kB 3c503/16 - cards between card addr. 0x2000 and 0x3fff. */ - { /* Check the card's memory. */ - void __iomem *mem_base = ei_status.mem; - unsigned int test_val = 0xbbadf00d; - writel(0xba5eba5e, mem_base); - for (i = sizeof(test_val); i < EL2_MEMSIZE; i+=sizeof(test_val)) { - writel(test_val, mem_base + i); - if (readl(mem_base) != 0xba5eba5e || - readl(mem_base + i) != test_val) { - pr_warning("3c503: memory failure or memory address conflict.\n"); - dev->mem_start = 0; - ei_status.name = "3c503-PIO"; - iounmap(mem_base); - ei_status.mem = NULL; - break; - } - test_val += 0x55555555; - writel(0, mem_base + i); - } - } -#endif /* EL2MEMTEST */ - - if (dev->mem_start) - dev->mem_end = dev->mem_start + EL2_MEMSIZE; - - if (wordlength) { /* No Tx pages to skip over to get to Rx */ - ei_status.priv = 0; - ei_status.name = "3c503/16"; - } else { - ei_status.priv = TX_PAGES * 256; - ei_status.name = "3c503"; - } - } - - /* - Divide up the memory on the card. This is the same regardless of - whether shared-mem or PIO is used. For 16 bit cards (16kB RAM), - we use the entire 8k of bank1 for an Rx ring. We only use 3k - of the bank0 for 2 full size Tx packet slots. For 8 bit cards, - (8kB RAM) we use 3kB of bank1 for two Tx slots, and the remaining - 5kB for an Rx ring. */ - - if (wordlength) { - ei_status.tx_start_page = EL2_MB0_START_PG; - ei_status.rx_start_page = EL2_MB1_START_PG; - } else { - ei_status.tx_start_page = EL2_MB1_START_PG; - ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES; - } - - /* Finish setting the board's parameters. */ - ei_status.stop_page = EL2_MB1_STOP_PG; - ei_status.word16 = wordlength; - ei_status.reset_8390 = el2_reset_8390; - ei_status.get_8390_hdr = el2_get_8390_hdr; - ei_status.block_input = el2_block_input; - ei_status.block_output = el2_block_output; - - if (dev->irq == 2) - dev->irq = 9; - else if (dev->irq > 5 && dev->irq != 9) { - pr_warning("3c503: configured interrupt %d invalid, will use autoIRQ.\n", - dev->irq); - dev->irq = 0; - } - - ei_status.saved_irq = dev->irq; - - dev->netdev_ops = &el2_netdev_ops; - dev->ethtool_ops = &netdev_ethtool_ops; - - retval = register_netdev(dev); - if (retval) - goto out1; - - if (dev->mem_start) - pr_info("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n", - dev->name, ei_status.name, (wordlength+1)<<3, - dev->mem_start, dev->mem_end-1); - - else - { - ei_status.tx_start_page = EL2_MB1_START_PG; - ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES; - pr_info("%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n", - dev->name, ei_status.name, (wordlength+1)<<3); - } - release_region(ioaddr + 0x400, 8); - return 0; -out1: - release_region(ioaddr + 0x400, 8); -out: - release_region(ioaddr, EL2_IO_EXTENT); - return retval; -} - -static irqreturn_t el2_probe_interrupt(int irq, void *seen) -{ - *(bool *)seen = true; - return IRQ_HANDLED; -} - -static int -el2_open(struct net_device *dev) -{ - int retval; - - if (dev->irq < 2) { - static const int irqlist[] = {5, 9, 3, 4, 0}; - const int *irqp = irqlist; - - outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */ - do { - bool seen; - - retval = request_irq(*irqp, el2_probe_interrupt, 0, - dev->name, &seen); - if (retval == -EBUSY) - continue; - if (retval < 0) - goto err_disable; - - /* Twinkle the interrupt, and check if it's seen. */ - seen = false; - smp_wmb(); - outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR); - outb_p(0x00, E33G_IDCFR); - msleep(1); - free_irq(*irqp, &seen); - if (!seen) - continue; - - retval = request_irq(dev->irq = *irqp, eip_interrupt, 0, - dev->name, dev); - if (retval == -EBUSY) - continue; - if (retval < 0) - goto err_disable; - break; - } while (*++irqp); - - if (*irqp == 0) { - err_disable: - outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */ - return -EAGAIN; - } - } else { - if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) { - return retval; - } - } - - el2_init_card(dev); - eip_open(dev); - return 0; -} - -static int -el2_close(struct net_device *dev) -{ - free_irq(dev->irq, dev); - dev->irq = ei_status.saved_irq; - outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */ - - eip_close(dev); - return 0; -} - -/* This is called whenever we have a unrecoverable failure: - transmit timeout - Bad ring buffer packet header - */ -static void -el2_reset_8390(struct net_device *dev) -{ - if (ei_debug > 1) { - pr_debug("%s: Resetting the 3c503 board...", dev->name); - pr_cont(" %#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR), - E33G_CNTRL, inb(E33G_CNTRL), E33G_GACFR, inb(E33G_GACFR)); - } - outb_p(ECNTRL_RESET|ECNTRL_THIN, E33G_CNTRL); - ei_status.txing = 0; - outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); - el2_init_card(dev); - if (ei_debug > 1) - pr_cont("done\n"); -} - -/* Initialize the 3c503 GA registers after a reset. */ -static void -el2_init_card(struct net_device *dev) -{ - /* Unmap the station PROM and select the DIX or BNC connector. */ - outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); - - /* Set ASIC copy of rx's first and last+1 buffer pages */ - /* These must be the same as in the 8390. */ - outb(ei_status.rx_start_page, E33G_STARTPG); - outb(ei_status.stop_page, E33G_STOPPG); - - /* Point the vector pointer registers somewhere ?harmless?. */ - outb(0xff, E33G_VP2); /* Point at the ROM restart location 0xffff0 */ - outb(0xff, E33G_VP1); - outb(0x00, E33G_VP0); - /* Turn off all interrupts until we're opened. */ - outb_p(0x00, dev->base_addr + EN0_IMR); - /* Enable IRQs iff started. */ - outb(EGACFR_NORM, E33G_GACFR); - - /* Set the interrupt line. */ - outb_p((0x04 << (dev->irq == 9 ? 2 : dev->irq)), E33G_IDCFR); - outb_p((WRD_COUNT << 1), E33G_DRQCNT); /* Set burst size to 8 */ - outb_p(0x20, E33G_DMAAH); /* Put a valid addr in the GA DMA */ - outb_p(0x00, E33G_DMAAL); - return; /* We always succeed */ -} - -/* - * Either use the shared memory (if enabled on the board) or put the packet - * out through the ASIC FIFO. - */ -static void -el2_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - unsigned short int *wrd; - int boguscount; /* timeout counter */ - unsigned short word; /* temporary for better machine code */ - void __iomem *base = ei_status.mem; - - if (ei_status.word16) /* Tx packets go into bank 0 on EL2/16 card */ - outb(EGACFR_RSEL|EGACFR_TCM, E33G_GACFR); - else - outb(EGACFR_NORM, E33G_GACFR); - - if (base) { /* Shared memory transfer */ - memcpy_toio(base + ((start_page - ei_status.tx_start_page) << 8), - buf, count); - outb(EGACFR_NORM, E33G_GACFR); /* Back to bank1 in case on bank0 */ - return; - } - -/* - * No shared memory, put the packet out the other way. - * Set up then start the internal memory transfer to Tx Start Page - */ - - word = (unsigned short)start_page; - outb(word&0xFF, E33G_DMAAH); - outb(word>>8, E33G_DMAAL); - - outb_p((ei_status.interface_num ? ECNTRL_AUI : ECNTRL_THIN ) | ECNTRL_OUTPUT - | ECNTRL_START, E33G_CNTRL); - -/* - * Here I am going to write data to the FIFO as quickly as possible. - * Note that E33G_FIFOH is defined incorrectly. It is really - * E33G_FIFOL, the lowest port address for both the byte and - * word write. Variable 'count' is NOT checked. Caller must supply a - * valid count. Note that I may write a harmless extra byte to the - * 8390 if the byte-count was not even. - */ - wrd = (unsigned short int *) buf; - count = (count + 1) >> 1; - for(;;) - { - boguscount = 0x1000; - while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0) - { - if(!boguscount--) - { - pr_notice("%s: FIFO blocked in el2_block_output.\n", dev->name); - el2_reset_8390(dev); - goto blocked; - } - } - if(count > WRD_COUNT) - { - outsw(E33G_FIFOH, wrd, WRD_COUNT); - wrd += WRD_COUNT; - count -= WRD_COUNT; - } - else - { - outsw(E33G_FIFOH, wrd, count); - break; - } - } - blocked:; - outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); -} - -/* Read the 4 byte, page aligned 8390 specific header. */ -static void -el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - int boguscount; - void __iomem *base = ei_status.mem; - unsigned short word; - - if (base) { /* Use the shared memory. */ - void __iomem *hdr_start = base + ((ring_page - EL2_MB1_START_PG)<<8); - memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); - hdr->count = le16_to_cpu(hdr->count); - return; - } - -/* - * No shared memory, use programmed I/O. - */ - - word = (unsigned short)ring_page; - outb(word&0xFF, E33G_DMAAH); - outb(word>>8, E33G_DMAAL); - - outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT - | ECNTRL_START, E33G_CNTRL); - boguscount = 0x1000; - while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0) - { - if(!boguscount--) - { - pr_notice("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name); - memset(hdr, 0x00, sizeof(struct e8390_pkt_hdr)); - el2_reset_8390(dev); - goto blocked; - } - } - insw(E33G_FIFOH, hdr, (sizeof(struct e8390_pkt_hdr))>> 1); - blocked:; - outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); -} - - -static void -el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - int boguscount = 0; - void __iomem *base = ei_status.mem; - unsigned short int *buf; - unsigned short word; - - /* Maybe enable shared memory just be to be safe... nahh.*/ - if (base) { /* Use the shared memory. */ - ring_offset -= (EL2_MB1_START_PG<<8); - if (ring_offset + count > EL2_MEMSIZE) { - /* We must wrap the input move. */ - int semi_count = EL2_MEMSIZE - ring_offset; - memcpy_fromio(skb->data, base + ring_offset, semi_count); - count -= semi_count; - memcpy_fromio(skb->data + semi_count, base + ei_status.priv, count); - } else { - memcpy_fromio(skb->data, base + ring_offset, count); - } - return; - } - -/* - * No shared memory, use programmed I/O. - */ - word = (unsigned short) ring_offset; - outb(word>>8, E33G_DMAAH); - outb(word&0xFF, E33G_DMAAL); - - outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT - | ECNTRL_START, E33G_CNTRL); - -/* - * Here I also try to get data as fast as possible. I am betting that I - * can read one extra byte without clobbering anything in the kernel because - * this would only occur on an odd byte-count and allocation of skb->data - * is word-aligned. Variable 'count' is NOT checked. Caller must check - * for a valid count. - * [This is currently quite safe.... but if one day the 3c503 explodes - * you know where to come looking ;)] - */ - - buf = (unsigned short int *) skb->data; - count = (count + 1) >> 1; - for(;;) - { - boguscount = 0x1000; - while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0) - { - if(!boguscount--) - { - pr_notice("%s: FIFO blocked in el2_block_input.\n", dev->name); - el2_reset_8390(dev); - goto blocked; - } - } - if(count > WRD_COUNT) - { - insw(E33G_FIFOH, buf, WRD_COUNT); - buf += WRD_COUNT; - count -= WRD_COUNT; - } - else - { - insw(E33G_FIFOH, buf, count); - break; - } - } - blocked:; - outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); -} - - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); - strlcpy(info->version, DRV_VERSION, sizeof(info->version)); - snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", - dev->base_addr); -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, -}; - -#ifdef MODULE -#define MAX_EL2_CARDS 4 /* Max number of EL2 cards per module */ - -static struct net_device *dev_el2[MAX_EL2_CARDS]; -static int io[MAX_EL2_CARDS]; -static int irq[MAX_EL2_CARDS]; -static int xcvr[MAX_EL2_CARDS]; /* choose int. or ext. xcvr */ -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(xcvr, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); -MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)"); -MODULE_DESCRIPTION("3Com ISA EtherLink II, II/16 (3c503, 3c503/16) driver"); -MODULE_LICENSE("GPL"); - -/* This is set up so that only a single autoprobe takes place per call. -ISA device autoprobes on a running machine are not recommended. */ -int __init -init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) { - if (io[this_dev] == 0) { - if (this_dev != 0) break; /* only autoprobe 1st one */ - pr_notice("3c503.c: Presently autoprobing (not recommended) for a single card.\n"); - } - dev = alloc_eip_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - dev->mem_end = xcvr[this_dev]; /* low 4bits = xcvr sel. */ - if (do_el2_probe(dev) == 0) { - dev_el2[found++] = dev; - continue; - } - free_netdev(dev); - pr_warning("3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - /* NB: el2_close() handles free_irq */ - release_region(dev->base_addr, EL2_IO_EXTENT); - if (ei_status.mem) - iounmap(ei_status.mem); -} - -void __exit -cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) { - struct net_device *dev = dev_el2[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ diff --git a/drivers/net/ethernet/8390/3c503.h b/drivers/net/ethernet/8390/3c503.h deleted file mode 100644 index e2367b8..0000000 --- a/drivers/net/ethernet/8390/3c503.h +++ /dev/null @@ -1,91 +0,0 @@ -/* Definitions for the 3Com 3c503 Etherlink 2. */ -/* This file is distributed under the GPL. - Many of these names and comments are directly from the Crynwr packet - drivers, which are released under the GPL. */ - -#define EL2H (dev->base_addr + 0x400) -#define EL2L (dev->base_addr) - -/* Vendor unique hardware addr. prefix. 3Com has 2 because they ran - out of available addresses on the first one... */ - -#define OLD_3COM_ID 0x02608c -#define NEW_3COM_ID 0x0020af - -/* Shared memory management parameters. NB: The 8 bit cards have only - one bank (MB1) which serves both Tx and Rx packet space. The 16bit - cards have 2 banks, MB0 for Tx packets, and MB1 for Rx packets. - You choose which bank appears in the sh. mem window with EGACFR_MBSn */ - -#define EL2_MB0_START_PG (0x00) /* EL2/16 Tx packets go in bank 0 */ -#define EL2_MB1_START_PG (0x20) /* First page of bank 1 */ -#define EL2_MB1_STOP_PG (0x40) /* Last page +1 of bank 1 */ - -/* 3Com 3c503 ASIC registers */ -#define E33G_STARTPG (EL2H+0) /* Start page, matching EN0_STARTPG */ -#define E33G_STOPPG (EL2H+1) /* Stop page, must match EN0_STOPPG */ -#define E33G_DRQCNT (EL2H+2) /* DMA burst count */ -#define E33G_IOBASE (EL2H+3) /* Read of I/O base jumpers. */ - /* (non-useful, but it also appears at the end of EPROM space) */ -#define E33G_ROMBASE (EL2H+4) /* Read of memory base jumpers. */ -#define E33G_GACFR (EL2H+5) /* Config/setup bits for the ASIC GA */ -#define E33G_CNTRL (EL2H+6) /* Board's main control register */ -#define E33G_STATUS (EL2H+7) /* Status on completions. */ -#define E33G_IDCFR (EL2H+8) /* Interrupt/DMA config register */ - /* (Which IRQ to assert, DMA chan to use) */ -#define E33G_DMAAH (EL2H+9) /* High byte of DMA address reg */ -#define E33G_DMAAL (EL2H+10) /* Low byte of DMA address reg */ -/* "Vector pointer" - if this address matches a read, the EPROM (rather than - shared RAM) is mapped into memory space. */ -#define E33G_VP2 (EL2H+11) -#define E33G_VP1 (EL2H+12) -#define E33G_VP0 (EL2H+13) -#define E33G_FIFOH (EL2H+14) /* FIFO for programmed I/O moves */ -#define E33G_FIFOL (EL2H+15) /* ... low byte of above. */ - -/* Bits in E33G_CNTRL register: */ - -#define ECNTRL_RESET (0x01) /* Software reset of the ASIC and 8390 */ -#define ECNTRL_THIN (0x02) /* Onboard xcvr enable, AUI disable */ -#define ECNTRL_AUI (0x00) /* Onboard xcvr disable, AUI enable */ -#define ECNTRL_SAPROM (0x04) /* Map the station address prom */ -#define ECNTRL_DBLBFR (0x20) /* FIFO configuration bit */ -#define ECNTRL_OUTPUT (0x40) /* PC-to-3C503 direction if 1 */ -#define ECNTRL_INPUT (0x00) /* 3C503-to-PC direction if 0 */ -#define ECNTRL_START (0x80) /* Start the DMA logic */ - -/* Bits in E33G_STATUS register: */ - -#define ESTAT_DPRDY (0x80) /* Data port (of FIFO) ready */ -#define ESTAT_UFLW (0x40) /* Tried to read FIFO when it was empty */ -#define ESTAT_OFLW (0x20) /* Tried to write FIFO when it was full */ -#define ESTAT_DTC (0x10) /* Terminal Count from PC bus DMA logic */ -#define ESTAT_DIP (0x08) /* DMA In Progress */ - -/* Bits in E33G_GACFR register: */ - -#define EGACFR_NIM (0x80) /* NIC interrupt mask */ -#define EGACFR_TCM (0x40) /* DMA term. count interrupt mask */ -#define EGACFR_RSEL (0x08) /* Map a bank of card mem into system mem */ -#define EGACFR_MBS2 (0x04) /* Memory bank select, bit 2. */ -#define EGACFR_MBS1 (0x02) /* Memory bank select, bit 1. */ -#define EGACFR_MBS0 (0x01) /* Memory bank select, bit 0. */ - -#define EGACFR_NORM (0x49) /* TCM | RSEL | MBS0 */ -#define EGACFR_IRQOFF (0xc9) /* TCM | RSEL | MBS0 | NIM */ - -/* - MBS2 MBS1 MBS0 Sh. mem windows card mem at: - ---- ---- ---- ----------------------------- - 0 0 0 0x0000 -- bank 0 - 0 0 1 0x2000 -- bank 1 (only choice for 8bit card) - 0 1 0 0x4000 -- bank 2, not used - 0 1 1 0x6000 -- bank 3, not used - -There was going to be a 32k card that used bank 2 and 3, but it -never got produced. - -*/ - - -/* End of 3C503 parameter definitions */ diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index e49a442..1b78ca7 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -21,18 +21,6 @@ config NET_VENDOR_8390 if NET_VENDOR_8390 -config EL2 - tristate "3c503 \"EtherLink II\" support" - depends on ISA - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called 3c503. - config PCMCIA_AXNET tristate "Asix AX88190 PCMCIA support" depends on PCMCIA @@ -62,42 +50,6 @@ config AX88796_93CX6 ---help--- Select this if your platform comes with an external 93CX6 eeprom. -config E2100 - tristate "Cabletron E21xx support" - depends on ISA - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called e2100. - -config HPLAN_PLUS - tristate "HP PCLAN+ (27247B and 27252A) support" - depends on ISA - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called hp-plus. - -config HPLAN - tristate "HP PCLAN (27245 and other 27xxx series) support" - depends on ISA - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called hp. - config HYDRA tristate "Hydra support" depends on ZORRO diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile index e8bb97c..588954a 100644 --- a/drivers/net/ethernet/8390/Makefile +++ b/drivers/net/ethernet/8390/Makefile @@ -6,10 +6,6 @@ obj-$(CONFIG_MAC8390) += mac8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_ARM_ETHERH) += etherh.o obj-$(CONFIG_AX88796) += ax88796.o -obj-$(CONFIG_E2100) += e2100.o 8390.o -obj-$(CONFIG_EL2) += 3c503.o 8390p.o -obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o -obj-$(CONFIG_HPLAN) += hp.o 8390p.o obj-$(CONFIG_HYDRA) += hydra.o 8390.o obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o obj-$(CONFIG_NE2000) += ne.o 8390p.o diff --git a/drivers/net/ethernet/8390/e2100.c b/drivers/net/ethernet/8390/e2100.c deleted file mode 100644 index ed55ce8..0000000 --- a/drivers/net/ethernet/8390/e2100.c +++ /dev/null @@ -1,489 +0,0 @@ -/* e2100.c: A Cabletron E2100 series ethernet driver for linux. */ -/* - Written 1993-1994 by Donald Becker. - - Copyright 1994 by Donald Becker. - Copyright 1993 United States Government as represented by the - Director, National Security Agency. This software may be used and - distributed according to the terms of the GNU General Public License, - incorporated herein by reference. - - This is a driver for the Cabletron E2100 series ethercards. - - The Author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - The E2100 series ethercard is a fairly generic shared memory 8390 - implementation. The only unusual aspect is the way the shared memory - registers are set: first you do an inb() in what is normally the - station address region, and the low three bits of next outb() *address* - is used as the write value for that register. Either someone wasn't - too used to dem bit en bites, or they were trying to obfuscate the - programming interface. - - There is an additional complication when setting the window on the packet - buffer. You must first do a read into the packet buffer region with the - low 8 address bits the address setting the page for the start of the packet - buffer window, and then do the above operation. See mem_on() for details. - - One bug on the chip is that even a hard reset won't disable the memory - window, usually resulting in a hung machine if mem_off() isn't called. - If this happens, you must power down the machine for about 30 seconds. -*/ - -static const char version[] = - "e2100.c:v1.01 7/21/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/delay.h> - -#include <asm/io.h> - -#include "8390.h" - -#define DRV_NAME "e2100" - -static int e21_probe_list[] = {0x300, 0x280, 0x380, 0x220, 0}; - -/* Offsets from the base_addr. - Read from the ASIC register, and the low three bits of the next outb() - address is used to set the corresponding register. */ -#define E21_NIC_OFFSET 0 /* Offset to the 8390 NIC. */ -#define E21_ASIC 0x10 -#define E21_MEM_ENABLE 0x10 -#define E21_MEM_ON 0x05 /* Enable memory in 16 bit mode. */ -#define E21_MEM_ON_8 0x07 /* Enable memory in 8 bit mode. */ -#define E21_MEM_BASE 0x11 -#define E21_IRQ_LOW 0x12 /* The low three bits of the IRQ number. */ -#define E21_IRQ_HIGH 0x14 /* The high IRQ bit and media select ... */ -#define E21_MEDIA 0x14 /* (alias). */ -#define E21_ALT_IFPORT 0x02 /* Set to use the other (BNC,AUI) port. */ -#define E21_BIG_MEM 0x04 /* Use a bigger (64K) buffer (we don't) */ -#define E21_SAPROM 0x10 /* Offset to station address data. */ -#define E21_IO_EXTENT 0x20 - -static inline void mem_on(short port, volatile char __iomem *mem_base, - unsigned char start_page ) -{ - /* This is a little weird: set the shared memory window by doing a - read. The low address bits specify the starting page. */ - readb(mem_base+start_page); - inb(port + E21_MEM_ENABLE); - outb(E21_MEM_ON, port + E21_MEM_ENABLE + E21_MEM_ON); -} - -static inline void mem_off(short port) -{ - inb(port + E21_MEM_ENABLE); - outb(0x00, port + E21_MEM_ENABLE); -} - -/* In other drivers I put the TX pages first, but the E2100 window circuitry - is designed to have a 4K Tx region last. The windowing circuitry wraps the - window at 0x2fff->0x0000 so that the packets at e.g. 0x2f00 in the RX ring - appear contiguously in the window. */ -#define E21_RX_START_PG 0x00 /* First page of RX buffer */ -#define E21_RX_STOP_PG 0x30 /* Last page +1 of RX ring */ -#define E21_BIG_RX_STOP_PG 0xF0 /* Last page +1 of RX ring */ -#define E21_TX_START_PG E21_RX_STOP_PG /* First page of TX buffer */ - -static int e21_probe1(struct net_device *dev, int ioaddr); - -static int e21_open(struct net_device *dev); -static void e21_reset_8390(struct net_device *dev); -static void e21_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void e21_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); -static void e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static int e21_open(struct net_device *dev); -static int e21_close(struct net_device *dev); - - -/* Probe for the E2100 series ethercards. These cards have an 8390 at the - base address and the station address at both offset 0x10 and 0x18. I read - the station address from offset 0x18 to avoid the dataport of NE2000 - ethercards, and look for Ctron's unique ID (first three octets of the - station address). - */ - -static int __init do_e2100_probe(struct net_device *dev) -{ - int *port; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return e21_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (port = e21_probe_list; *port; port++) { - dev->irq = irq; - if (e21_probe1(dev, *port) == 0) - return 0; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init e2100_probe(int unit) -{ - struct net_device *dev = alloc_ei_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_e2100_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops e21_netdev_ops = { - .ndo_open = e21_open, - .ndo_stop = e21_close, - - .ndo_start_xmit = ei_start_xmit, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_get_stats = ei_get_stats, - .ndo_set_rx_mode = ei_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, -#endif -}; - -static int __init e21_probe1(struct net_device *dev, int ioaddr) -{ - int i, status, retval; - unsigned char *station_addr = dev->dev_addr; - static unsigned version_printed; - - if (!request_region(ioaddr, E21_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - /* First check the station address for the Ctron prefix. */ - if (inb(ioaddr + E21_SAPROM + 0) != 0x00 || - inb(ioaddr + E21_SAPROM + 1) != 0x00 || - inb(ioaddr + E21_SAPROM + 2) != 0x1d) { - retval = -ENODEV; - goto out; - } - - /* Verify by making certain that there is a 8390 at there. */ - outb(E8390_NODMA + E8390_STOP, ioaddr); - udelay(1); /* we want to delay one I/O cycle - which is 2MHz */ - status = inb(ioaddr); - if (status != 0x21 && status != 0x23) { - retval = -ENODEV; - goto out; - } - - /* Read the station address PROM. */ - for (i = 0; i < 6; i++) - station_addr[i] = inb(ioaddr + E21_SAPROM + i); - - inb(ioaddr + E21_MEDIA); /* Point to media selection. */ - outb(0, ioaddr + E21_ASIC); /* and disable the secondary interface. */ - - if (ei_debug && version_printed++ == 0) - printk(version); - - for (i = 0; i < 6; i++) - printk(" %02X", station_addr[i]); - - if (dev->irq < 2) { - static const int irqlist[] = {15, 11, 10, 12, 5, 9, 3, 4}; - for (i = 0; i < ARRAY_SIZE(irqlist); i++) - if (request_irq (irqlist[i], NULL, 0, "bogus", NULL) != -EBUSY) { - dev->irq = irqlist[i]; - break; - } - if (i >= ARRAY_SIZE(irqlist)) { - printk(" unable to get IRQ %d.\n", dev->irq); - retval = -EAGAIN; - goto out; - } - } else if (dev->irq == 2) /* Fixup luser bogosity: IRQ2 is really IRQ9 */ - dev->irq = 9; - - /* The 8390 is at the base address. */ - dev->base_addr = ioaddr; - - ei_status.name = "E2100"; - ei_status.word16 = 1; - ei_status.tx_start_page = E21_TX_START_PG; - ei_status.rx_start_page = E21_RX_START_PG; - ei_status.stop_page = E21_RX_STOP_PG; - ei_status.saved_irq = dev->irq; - - /* Check the media port used. The port can be passed in on the - low mem_end bits. */ - if (dev->mem_end & 15) - dev->if_port = dev->mem_end & 7; - else { - dev->if_port = 0; - inb(ioaddr + E21_MEDIA); /* Turn automatic media detection on. */ - for(i = 0; i < 6; i++) - if (station_addr[i] != inb(ioaddr + E21_SAPROM + 8 + i)) { - dev->if_port = 1; - break; - } - } - - /* Never map in the E21 shared memory unless you are actively using it. - Also, the shared memory has effective only one setting -- spread all - over the 128K region! */ - if (dev->mem_start == 0) - dev->mem_start = 0xd0000; - - ei_status.mem = ioremap(dev->mem_start, 2*1024); - if (!ei_status.mem) { - printk("unable to remap memory\n"); - retval = -EAGAIN; - goto out; - } - -#ifdef notdef - /* These values are unused. The E2100 has a 2K window into the packet - buffer. The window can be set to start on any page boundary. */ - ei_status.rmem_start = dev->mem_start + TX_PAGES*256; - dev->mem_end = ei_status.rmem_end = dev->mem_start + 2*1024; -#endif - - printk(", IRQ %d, %s media, memory @ %#lx.\n", dev->irq, - dev->if_port ? "secondary" : "primary", dev->mem_start); - - ei_status.reset_8390 = &e21_reset_8390; - ei_status.block_input = &e21_block_input; - ei_status.block_output = &e21_block_output; - ei_status.get_8390_hdr = &e21_get_8390_hdr; - - dev->netdev_ops = &e21_netdev_ops; - NS8390_init(dev, 0); - - retval = register_netdev(dev); - if (retval) - goto out; - return 0; -out: - release_region(ioaddr, E21_IO_EXTENT); - return retval; -} - -static int -e21_open(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - int retval; - - if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) - return retval; - - /* Set the interrupt line and memory base on the hardware. */ - inb(ioaddr + E21_IRQ_LOW); - outb(0, ioaddr + E21_ASIC + (dev->irq & 7)); - inb(ioaddr + E21_IRQ_HIGH); /* High IRQ bit, and if_port. */ - outb(0, ioaddr + E21_ASIC + (dev->irq > 7 ? 1:0) - + (dev->if_port ? E21_ALT_IFPORT : 0)); - inb(ioaddr + E21_MEM_BASE); - outb(0, ioaddr + E21_ASIC + ((dev->mem_start >> 17) & 7)); - - ei_open(dev); - return 0; -} - -static void -e21_reset_8390(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - - outb(0x01, ioaddr); - if (ei_debug > 1) printk("resetting the E2180x3 t=%ld...", jiffies); - ei_status.txing = 0; - - /* Set up the ASIC registers, just in case something changed them. */ - - if (ei_debug > 1) printk("reset done\n"); -} - -/* Grab the 8390 specific header. We put the 2k window so the header page - appears at the start of the shared memory. */ - -static void -e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - - short ioaddr = dev->base_addr; - char __iomem *shared_mem = ei_status.mem; - - mem_on(ioaddr, shared_mem, ring_page); - -#ifdef notdef - /* Officially this is what we are doing, but the readl() is faster */ - memcpy_fromio(hdr, shared_mem, sizeof(struct e8390_pkt_hdr)); -#else - ((unsigned int*)hdr)[0] = readl(shared_mem); -#endif - - /* Turn off memory access: we would need to reprogram the window anyway. */ - mem_off(ioaddr); - -} - -/* Block input and output are easy on shared memory ethercards. - The E21xx makes block_input() especially easy by wrapping the top - ring buffer to the bottom automatically. */ -static void -e21_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - short ioaddr = dev->base_addr; - char __iomem *shared_mem = ei_status.mem; - - mem_on(ioaddr, shared_mem, (ring_offset>>8)); - - memcpy_fromio(skb->data, ei_status.mem + (ring_offset & 0xff), count); - - mem_off(ioaddr); -} - -static void -e21_block_output(struct net_device *dev, int count, const unsigned char *buf, - int start_page) -{ - short ioaddr = dev->base_addr; - volatile char __iomem *shared_mem = ei_status.mem; - - /* Set the shared memory window start by doing a read, with the low address - bits specifying the starting page. */ - readb(shared_mem + start_page); - mem_on(ioaddr, shared_mem, start_page); - - memcpy_toio(shared_mem, buf, count); - mem_off(ioaddr); -} - -static int -e21_close(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - - if (ei_debug > 1) - printk("%s: Shutting down ethercard.\n", dev->name); - - free_irq(dev->irq, dev); - dev->irq = ei_status.saved_irq; - - /* Shut off the interrupt line and secondary interface. */ - inb(ioaddr + E21_IRQ_LOW); - outb(0, ioaddr + E21_ASIC); - inb(ioaddr + E21_IRQ_HIGH); /* High IRQ bit, and if_port. */ - outb(0, ioaddr + E21_ASIC); - - ei_close(dev); - - /* Double-check that the memory has been turned off, because really - really bad things happen if it isn't. */ - mem_off(ioaddr); - - return 0; -} - - -#ifdef MODULE -#define MAX_E21_CARDS 4 /* Max number of E21 cards per module */ -static struct net_device *dev_e21[MAX_E21_CARDS]; -static int io[MAX_E21_CARDS]; -static int irq[MAX_E21_CARDS]; -static int mem[MAX_E21_CARDS]; -static int xcvr[MAX_E21_CARDS]; /* choose int. or ext. xcvr */ - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); -module_param_array(xcvr, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s)"); -MODULE_PARM_DESC(mem, " memory base address(es)"); -MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)"); -MODULE_DESCRIPTION("Cabletron E2100 ISA ethernet driver"); -MODULE_LICENSE("GPL"); - -/* This is set up so that only a single autoprobe takes place per call. -ISA device autoprobes on a running machine are not recommended. */ - -int __init init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) { - if (io[this_dev] == 0) { - if (this_dev != 0) break; /* only autoprobe 1st one */ - printk(KERN_NOTICE "e2100.c: Presently autoprobing (not recommended) for a single card.\n"); - } - dev = alloc_ei_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - dev->mem_start = mem[this_dev]; - dev->mem_end = xcvr[this_dev]; /* low 4bits = xcvr sel. */ - if (do_e2100_probe(dev) == 0) { - dev_e21[found++] = dev; - continue; - } - free_netdev(dev); - printk(KERN_WARNING "e2100.c: No E2100 card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - /* NB: e21_close() handles free_irq */ - iounmap(ei_status.mem); - release_region(dev->base_addr, E21_IO_EXTENT); -} - -void __exit -cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) { - struct net_device *dev = dev_e21[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ diff --git a/drivers/net/ethernet/8390/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c deleted file mode 100644 index 52f70f9..0000000 --- a/drivers/net/ethernet/8390/hp-plus.c +++ /dev/null @@ -1,505 +0,0 @@ -/* hp-plus.c: A HP PCLAN/plus ethernet driver for linux. */ -/* - Written 1994 by Donald Becker. - - This driver is for the Hewlett Packard PC LAN (27***) plus ethercards. - These cards are sold under several model numbers, usually 2724*. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - As is often the case, a great deal of credit is owed to Russ Nelson. - The Crynwr packet driver was my primary source of HP-specific - programming information. -*/ - -static const char version[] = -"hp-plus.c:v1.10 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - -#include <linux/module.h> - -#include <linux/string.h> /* Important -- this inlines word moves. */ -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/delay.h> - -#include <asm/io.h> - -#include "8390.h" - -#define DRV_NAME "hp-plus" - -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int hpplus_portlist[] __initdata = -{0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0}; - -/* - The HP EtherTwist chip implementation is a fairly routine DP8390 - implementation. It allows both shared memory and programmed-I/O buffer - access, using a custom interface for both. The programmed-I/O mode is - entirely implemented in the HP EtherTwist chip, bypassing the problem - ridden built-in 8390 facilities used on NE2000 designs. The shared - memory mode is likewise special, with an offset register used to make - packets appear at the shared memory base. Both modes use a base and bounds - page register to hide the Rx ring buffer wrap -- a packet that spans the - end of physical buffer memory appears continuous to the driver. (c.f. the - 3c503 and Cabletron E2100) - - A special note: the internal buffer of the board is only 8 bits wide. - This lays several nasty traps for the unaware: - - the 8390 must be programmed for byte-wide operations - - all I/O and memory operations must work on whole words (the access - latches are serially preloaded and have no byte-swapping ability). - - This board is laid out in I/O space much like the earlier HP boards: - the first 16 locations are for the board registers, and the second 16 are - for the 8390. The board is easy to identify, with both a dedicated 16 bit - ID register and a constant 0x530* value in the upper bits of the paging - register. -*/ - -#define HP_ID 0x00 /* ID register, always 0x4850. */ -#define HP_PAGING 0x02 /* Registers visible @ 8-f, see PageName. */ -#define HPP_OPTION 0x04 /* Bitmapped options, see HP_Option. */ -#define HPP_OUT_ADDR 0x08 /* I/O output location in Perf_Page. */ -#define HPP_IN_ADDR 0x0A /* I/O input location in Perf_Page. */ -#define HP_DATAPORT 0x0c /* I/O data transfer in Perf_Page. */ -#define NIC_OFFSET 0x10 /* Offset to the 8390 registers. */ -#define HP_IO_EXTENT 32 - -#define HP_START_PG 0x00 /* First page of TX buffer */ -#define HP_STOP_PG 0x80 /* Last page +1 of RX ring */ - -/* The register set selected in HP_PAGING. */ -enum PageName { - Perf_Page = 0, /* Normal operation. */ - MAC_Page = 1, /* The ethernet address (+checksum). */ - HW_Page = 2, /* EEPROM-loaded hardware parameters. */ - LAN_Page = 4, /* Transceiver selection, testing, etc. */ - ID_Page = 6 }; - -/* The bit definitions for the HPP_OPTION register. */ -enum HP_Option { - NICReset = 1, ChipReset = 2, /* Active low, really UNreset. */ - EnableIRQ = 4, FakeIntr = 8, BootROMEnb = 0x10, IOEnb = 0x20, - MemEnable = 0x40, ZeroWait = 0x80, MemDisable = 0x1000, }; - -static int hpp_probe1(struct net_device *dev, int ioaddr); - -static void hpp_reset_8390(struct net_device *dev); -static int hpp_open(struct net_device *dev); -static int hpp_close(struct net_device *dev); -static void hpp_mem_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void hpp_mem_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); -static void hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static void hpp_io_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void hpp_io_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); -static void hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); - - -/* Probe a list of addresses for an HP LAN+ adaptor. - This routine is almost boilerplate. */ - -static int __init do_hpp_probe(struct net_device *dev) -{ - int i; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return hpp_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (i = 0; hpplus_portlist[i]; i++) { - if (hpp_probe1(dev, hpplus_portlist[i]) == 0) - return 0; - dev->irq = irq; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init hp_plus_probe(int unit) -{ - struct net_device *dev = alloc_eip_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_hpp_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops hpp_netdev_ops = { - .ndo_open = hpp_open, - .ndo_stop = hpp_close, - .ndo_start_xmit = eip_start_xmit, - .ndo_tx_timeout = eip_tx_timeout, - .ndo_get_stats = eip_get_stats, - .ndo_set_rx_mode = eip_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = eip_poll, -#endif -}; - - -/* Do the interesting part of the probe at a single address. */ -static int __init hpp_probe1(struct net_device *dev, int ioaddr) -{ - int i, retval; - unsigned char checksum = 0; - const char name[] = "HP-PC-LAN+"; - int mem_start; - static unsigned version_printed; - - if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - /* Check for the HP+ signature, 50 48 0x 53. */ - if (inw(ioaddr + HP_ID) != 0x4850 || - (inw(ioaddr + HP_PAGING) & 0xfff0) != 0x5300) { - retval = -ENODEV; - goto out; - } - - if (ei_debug && version_printed++ == 0) - printk(version); - - printk("%s: %s at %#3x, ", dev->name, name, ioaddr); - - /* Retrieve and checksum the station address. */ - outw(MAC_Page, ioaddr + HP_PAGING); - - for(i = 0; i < ETH_ALEN; i++) { - unsigned char inval = inb(ioaddr + 8 + i); - dev->dev_addr[i] = inval; - checksum += inval; - } - checksum += inb(ioaddr + 14); - - printk("%pM", dev->dev_addr); - - if (checksum != 0xff) { - printk(" bad checksum %2.2x.\n", checksum); - retval = -ENODEV; - goto out; - } else { - /* Point at the Software Configuration Flags. */ - outw(ID_Page, ioaddr + HP_PAGING); - printk(" ID %4.4x", inw(ioaddr + 12)); - } - - /* Read the IRQ line. */ - outw(HW_Page, ioaddr + HP_PAGING); - { - int irq = inb(ioaddr + 13) & 0x0f; - int option = inw(ioaddr + HPP_OPTION); - - dev->irq = irq; - if (option & MemEnable) { - mem_start = inw(ioaddr + 9) << 8; - printk(", IRQ %d, memory address %#x.\n", irq, mem_start); - } else { - mem_start = 0; - printk(", IRQ %d, programmed-I/O mode.\n", irq); - } - } - - /* Set the wrap registers for string I/O reads. */ - outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14); - - /* Set the base address to point to the NIC, not the "real" base! */ - dev->base_addr = ioaddr + NIC_OFFSET; - - dev->netdev_ops = &hpp_netdev_ops; - - ei_status.name = name; - ei_status.word16 = 0; /* Agggghhhhh! Debug time: 2 days! */ - ei_status.tx_start_page = HP_START_PG; - ei_status.rx_start_page = HP_START_PG + TX_PAGES/2; - ei_status.stop_page = HP_STOP_PG; - - ei_status.reset_8390 = &hpp_reset_8390; - ei_status.block_input = &hpp_io_block_input; - ei_status.block_output = &hpp_io_block_output; - ei_status.get_8390_hdr = &hpp_io_get_8390_hdr; - - /* Check if the memory_enable flag is set in the option register. */ - if (mem_start) { - ei_status.block_input = &hpp_mem_block_input; - ei_status.block_output = &hpp_mem_block_output; - ei_status.get_8390_hdr = &hpp_mem_get_8390_hdr; - dev->mem_start = mem_start; - ei_status.mem = ioremap(mem_start, - (HP_STOP_PG - HP_START_PG)*256); - if (!ei_status.mem) { - retval = -ENOMEM; - goto out; - } - ei_status.rmem_start = dev->mem_start + TX_PAGES/2*256; - dev->mem_end = ei_status.rmem_end - = dev->mem_start + (HP_STOP_PG - HP_START_PG)*256; - } - - outw(Perf_Page, ioaddr + HP_PAGING); - NS8390p_init(dev, 0); - /* Leave the 8390 and HP chip reset. */ - outw(inw(ioaddr + HPP_OPTION) & ~EnableIRQ, ioaddr + HPP_OPTION); - - retval = register_netdev(dev); - if (retval) - goto out1; - return 0; -out1: - iounmap(ei_status.mem); -out: - release_region(ioaddr, HP_IO_EXTENT); - return retval; -} - -static int -hpp_open(struct net_device *dev) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - int option_reg; - int retval; - - if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) { - return retval; - } - - /* Reset the 8390 and HP chip. */ - option_reg = inw(ioaddr + HPP_OPTION); - outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION); - udelay(5); - /* Unreset the board and enable interrupts. */ - outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION); - - /* Set the wrap registers for programmed-I/O operation. */ - outw(HW_Page, ioaddr + HP_PAGING); - outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14); - - /* Select the operational page. */ - outw(Perf_Page, ioaddr + HP_PAGING); - - return eip_open(dev); -} - -static int -hpp_close(struct net_device *dev) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - int option_reg = inw(ioaddr + HPP_OPTION); - - free_irq(dev->irq, dev); - eip_close(dev); - outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset, - ioaddr + HPP_OPTION); - - return 0; -} - -static void -hpp_reset_8390(struct net_device *dev) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - int option_reg = inw(ioaddr + HPP_OPTION); - - if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies); - - outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION); - /* Pause a few cycles for the hardware reset to take place. */ - udelay(5); - ei_status.txing = 0; - outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION); - - udelay(5); - - - if ((inb_p(ioaddr+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0) - printk("%s: hp_reset_8390() did not complete.\n", dev->name); - - if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies); -} - -/* The programmed-I/O version of reading the 4 byte 8390 specific header. - Note that transfer with the EtherTwist+ must be on word boundaries. */ - -static void -hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - - outw((ring_page<<8), ioaddr + HPP_IN_ADDR); - insw(ioaddr + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1); -} - -/* Block input and output, similar to the Crynwr packet driver. */ - -static void -hpp_io_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - char *buf = skb->data; - - outw(ring_offset, ioaddr + HPP_IN_ADDR); - insw(ioaddr + HP_DATAPORT, buf, count>>1); - if (count & 0x01) - buf[count-1] = inw(ioaddr + HP_DATAPORT); -} - -/* The corresponding shared memory versions of the above 2 functions. */ - -static void -hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - int option_reg = inw(ioaddr + HPP_OPTION); - - outw((ring_page<<8), ioaddr + HPP_IN_ADDR); - outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION); - memcpy_fromio(hdr, ei_status.mem, sizeof(struct e8390_pkt_hdr)); - outw(option_reg, ioaddr + HPP_OPTION); - hdr->count = (le16_to_cpu(hdr->count) + 3) & ~3; /* Round up allocation. */ -} - -static void -hpp_mem_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - int option_reg = inw(ioaddr + HPP_OPTION); - - outw(ring_offset, ioaddr + HPP_IN_ADDR); - - outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION); - - /* Caution: this relies on get_8390_hdr() rounding up count! - Also note that we *can't* use eth_io_copy_and_sum() because - it will not always copy "count" bytes (e.g. padded IP). */ - - memcpy_fromio(skb->data, ei_status.mem, count); - outw(option_reg, ioaddr + HPP_OPTION); -} - -/* A special note: we *must* always transfer >=16 bit words. - It's always safe to round up, so we do. */ -static void -hpp_io_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - outw(start_page << 8, ioaddr + HPP_OUT_ADDR); - outsl(ioaddr + HP_DATAPORT, buf, (count+3)>>2); -} - -static void -hpp_mem_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - int ioaddr = dev->base_addr - NIC_OFFSET; - int option_reg = inw(ioaddr + HPP_OPTION); - - outw(start_page << 8, ioaddr + HPP_OUT_ADDR); - outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION); - memcpy_toio(ei_status.mem, buf, (count + 3) & ~3); - outw(option_reg, ioaddr + HPP_OPTION); -} - - -#ifdef MODULE -#define MAX_HPP_CARDS 4 /* Max number of HPP cards per module */ -static struct net_device *dev_hpp[MAX_HPP_CARDS]; -static int io[MAX_HPP_CARDS]; -static int irq[MAX_HPP_CARDS]; - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O port address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s); ignored if properly detected"); -MODULE_DESCRIPTION("HP PC-LAN+ ISA ethernet driver"); -MODULE_LICENSE("GPL"); - -/* This is set up so that only a single autoprobe takes place per call. -ISA device autoprobes on a running machine are not recommended. */ -int __init -init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) { - if (io[this_dev] == 0) { - if (this_dev != 0) break; /* only autoprobe 1st one */ - printk(KERN_NOTICE "hp-plus.c: Presently autoprobing (not recommended) for a single card.\n"); - } - dev = alloc_eip_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - if (do_hpp_probe(dev) == 0) { - dev_hpp[found++] = dev; - continue; - } - free_netdev(dev); - printk(KERN_WARNING "hp-plus.c: No HP-Plus card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - /* NB: hpp_close() handles free_irq */ - iounmap(ei_status.mem); - release_region(dev->base_addr - NIC_OFFSET, HP_IO_EXTENT); -} - -void __exit -cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) { - struct net_device *dev = dev_hpp[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ diff --git a/drivers/net/ethernet/8390/hp.c b/drivers/net/ethernet/8390/hp.c deleted file mode 100644 index 37fa89a..0000000 --- a/drivers/net/ethernet/8390/hp.c +++ /dev/null @@ -1,438 +0,0 @@ -/* hp.c: A HP LAN ethernet driver for linux. */ -/* - Written 1993-94 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - This is a driver for the HP PC-LAN adaptors. - - Sources: - The Crynwr packet driver. -*/ - -static const char version[] = - "hp.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/delay.h> - -#include <asm/io.h> - -#include "8390.h" - -#define DRV_NAME "hp" - -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int hppclan_portlist[] __initdata = -{ 0x300, 0x320, 0x340, 0x280, 0x2C0, 0x200, 0x240, 0}; - -#define HP_IO_EXTENT 32 - -#define HP_DATAPORT 0x0c /* "Remote DMA" data port. */ -#define HP_ID 0x07 -#define HP_CONFIGURE 0x08 /* Configuration register. */ -#define HP_RUN 0x01 /* 1 == Run, 0 == reset. */ -#define HP_IRQ 0x0E /* Mask for software-configured IRQ line. */ -#define HP_DATAON 0x10 /* Turn on dataport */ -#define NIC_OFFSET 0x10 /* Offset the 8390 registers. */ - -#define HP_START_PG 0x00 /* First page of TX buffer */ -#define HP_8BSTOP_PG 0x80 /* Last page +1 of RX ring */ -#define HP_16BSTOP_PG 0xFF /* Same, for 16 bit cards. */ - -static int hp_probe1(struct net_device *dev, int ioaddr); - -static void hp_reset_8390(struct net_device *dev); -static void hp_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static void hp_block_input(struct net_device *dev, int count, - struct sk_buff *skb , int ring_offset); -static void hp_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); - -static void hp_init_card(struct net_device *dev); - -/* The map from IRQ number to HP_CONFIGURE register setting. */ -/* My default is IRQ5 0 1 2 3 4 5 6 7 8 9 10 11 */ -static char irqmap[16] __initdata= { 0, 0, 4, 6, 8,10, 0,14, 0, 4, 2,12,0,0,0,0}; - - -/* Probe for an HP LAN adaptor. - Also initialize the card and fill in STATION_ADDR with the station - address. */ - -static int __init do_hp_probe(struct net_device *dev) -{ - int i; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return hp_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (i = 0; hppclan_portlist[i]; i++) { - if (hp_probe1(dev, hppclan_portlist[i]) == 0) - return 0; - dev->irq = irq; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init hp_probe(int unit) -{ - struct net_device *dev = alloc_eip_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_hp_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static int __init hp_probe1(struct net_device *dev, int ioaddr) -{ - int i, retval, board_id, wordmode; - const char *name; - static unsigned version_printed; - - if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - /* Check for the HP physical address, 08 00 09 xx xx xx. */ - /* This really isn't good enough: we may pick up HP LANCE boards - also! Avoid the lance 0x5757 signature. */ - if (inb(ioaddr) != 0x08 - || inb(ioaddr+1) != 0x00 - || inb(ioaddr+2) != 0x09 - || inb(ioaddr+14) == 0x57) { - retval = -ENODEV; - goto out; - } - - /* Set up the parameters based on the board ID. - If you have additional mappings, please mail them to me -djb. */ - if ((board_id = inb(ioaddr + HP_ID)) & 0x80) { - name = "HP27247"; - wordmode = 1; - } else { - name = "HP27250"; - wordmode = 0; - } - - if (ei_debug && version_printed++ == 0) - printk(version); - - printk("%s: %s (ID %02x) at %#3x,", dev->name, name, board_id, ioaddr); - - for(i = 0; i < ETH_ALEN; i++) - dev->dev_addr[i] = inb(ioaddr + i); - - printk(" %pM", dev->dev_addr); - - /* Snarf the interrupt now. Someday this could be moved to open(). */ - if (dev->irq < 2) { - static const int irq_16list[] = { 11, 10, 5, 3, 4, 7, 9, 0}; - static const int irq_8list[] = { 7, 5, 3, 4, 9, 0}; - const int *irqp = wordmode ? irq_16list : irq_8list; - do { - int irq = *irqp; - if (request_irq (irq, NULL, 0, "bogus", NULL) != -EBUSY) { - unsigned long cookie = probe_irq_on(); - /* Twinkle the interrupt, and check if it's seen. */ - outb_p(irqmap[irq] | HP_RUN, ioaddr + HP_CONFIGURE); - outb_p( 0x00 | HP_RUN, ioaddr + HP_CONFIGURE); - if (irq == probe_irq_off(cookie) /* It's a good IRQ line! */ - && request_irq (irq, eip_interrupt, 0, DRV_NAME, dev) == 0) { - printk(" selecting IRQ %d.\n", irq); - dev->irq = *irqp; - break; - } - } - } while (*++irqp); - if (*irqp == 0) { - printk(" no free IRQ lines.\n"); - retval = -EBUSY; - goto out; - } - } else { - if (dev->irq == 2) - dev->irq = 9; - if ((retval = request_irq(dev->irq, eip_interrupt, 0, DRV_NAME, dev))) { - printk (" unable to get IRQ %d.\n", dev->irq); - goto out; - } - } - - /* Set the base address to point to the NIC, not the "real" base! */ - dev->base_addr = ioaddr + NIC_OFFSET; - dev->netdev_ops = &eip_netdev_ops; - - ei_status.name = name; - ei_status.word16 = wordmode; - ei_status.tx_start_page = HP_START_PG; - ei_status.rx_start_page = HP_START_PG + TX_PAGES; - ei_status.stop_page = wordmode ? HP_16BSTOP_PG : HP_8BSTOP_PG; - - ei_status.reset_8390 = hp_reset_8390; - ei_status.get_8390_hdr = hp_get_8390_hdr; - ei_status.block_input = hp_block_input; - ei_status.block_output = hp_block_output; - hp_init_card(dev); - - retval = register_netdev(dev); - if (retval) - goto out1; - return 0; -out1: - free_irq(dev->irq, dev); -out: - release_region(ioaddr, HP_IO_EXTENT); - return retval; -} - -static void -hp_reset_8390(struct net_device *dev) -{ - int hp_base = dev->base_addr - NIC_OFFSET; - int saved_config = inb_p(hp_base + HP_CONFIGURE); - - if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies); - outb_p(0x00, hp_base + HP_CONFIGURE); - ei_status.txing = 0; - /* Pause just a few cycles for the hardware reset to take place. */ - udelay(5); - - outb_p(saved_config, hp_base + HP_CONFIGURE); - udelay(5); - - if ((inb_p(hp_base+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0) - printk("%s: hp_reset_8390() did not complete.\n", dev->name); - - if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies); -} - -static void -hp_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - int nic_base = dev->base_addr; - int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE); - - outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE); - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base); - outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO); - outb_p(0, nic_base + EN0_RCNTHI); - outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */ - outb_p(ring_page, nic_base + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, nic_base); - - if (ei_status.word16) - insw(nic_base - NIC_OFFSET + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1); - else - insb(nic_base - NIC_OFFSET + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)); - - outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE); -} - -/* Block input and output, similar to the Crynwr packet driver. If you are - porting to a new ethercard look at the packet driver source for hints. - The HP LAN doesn't use shared memory -- we put the packet - out through the "remote DMA" dataport. */ - -static void -hp_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - int nic_base = dev->base_addr; - int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE); - int xfer_count = count; - char *buf = skb->data; - - outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE); - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base); - outb_p(count & 0xff, nic_base + EN0_RCNTLO); - outb_p(count >> 8, nic_base + EN0_RCNTHI); - outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); - outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, nic_base); - if (ei_status.word16) { - insw(nic_base - NIC_OFFSET + HP_DATAPORT,buf,count>>1); - if (count & 0x01) - buf[count-1] = inb(nic_base - NIC_OFFSET + HP_DATAPORT), xfer_count++; - } else { - insb(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count); - } - /* This is for the ALPHA version only, remove for later releases. */ - if (ei_debug > 0) { /* DMA termination address check... */ - int high = inb_p(nic_base + EN0_RSARHI); - int low = inb_p(nic_base + EN0_RSARLO); - int addr = (high << 8) + low; - /* Check only the lower 8 bits so we can ignore ring wrap. */ - if (((ring_offset + xfer_count) & 0xff) != (addr & 0xff)) - printk("%s: RX transfer address mismatch, %#4.4x vs. %#4.4x (actual).\n", - dev->name, ring_offset + xfer_count, addr); - } - outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE); -} - -static void -hp_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - int nic_base = dev->base_addr; - int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE); - - outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE); - /* Round the count up for word writes. Do we need to do this? - What effect will an odd byte count have on the 8390? - I should check someday. */ - if (ei_status.word16 && (count & 0x01)) - count++; - /* We should already be in page 0, but to be safe... */ - outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base); - -#ifdef NE8390_RW_BUGFIX - /* Handle the read-before-write bug the same way as the - Crynwr packet driver -- the NatSemi method doesn't work. */ - outb_p(0x42, nic_base + EN0_RCNTLO); - outb_p(0, nic_base + EN0_RCNTHI); - outb_p(0xff, nic_base + EN0_RSARLO); - outb_p(0x00, nic_base + EN0_RSARHI); -#define NE_CMD 0x00 - outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD); - /* Make certain that the dummy read has occurred. */ - inb_p(0x61); - inb_p(0x61); -#endif - - outb_p(count & 0xff, nic_base + EN0_RCNTLO); - outb_p(count >> 8, nic_base + EN0_RCNTHI); - outb_p(0x00, nic_base + EN0_RSARLO); - outb_p(start_page, nic_base + EN0_RSARHI); - - outb_p(E8390_RWRITE+E8390_START, nic_base); - if (ei_status.word16) { - /* Use the 'rep' sequence for 16 bit boards. */ - outsw(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count>>1); - } else { - outsb(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count); - } - - /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here -- it's broken! */ - - /* This is for the ALPHA version only, remove for later releases. */ - if (ei_debug > 0) { /* DMA termination address check... */ - int high = inb_p(nic_base + EN0_RSARHI); - int low = inb_p(nic_base + EN0_RSARLO); - int addr = (high << 8) + low; - if ((start_page << 8) + count != addr) - printk("%s: TX Transfer address mismatch, %#4.4x vs. %#4.4x.\n", - dev->name, (start_page << 8) + count, addr); - } - outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE); -} - -/* This function resets the ethercard if something screws up. */ -static void __init -hp_init_card(struct net_device *dev) -{ - int irq = dev->irq; - NS8390p_init(dev, 0); - outb_p(irqmap[irq&0x0f] | HP_RUN, - dev->base_addr - NIC_OFFSET + HP_CONFIGURE); -} - -#ifdef MODULE -#define MAX_HP_CARDS 4 /* Max number of HP cards per module */ -static struct net_device *dev_hp[MAX_HP_CARDS]; -static int io[MAX_HP_CARDS]; -static int irq[MAX_HP_CARDS]; - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); -MODULE_DESCRIPTION("HP PC-LAN ISA ethernet driver"); -MODULE_LICENSE("GPL"); - -/* This is set up so that only a single autoprobe takes place per call. -ISA device autoprobes on a running machine are not recommended. */ -int __init -init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_HP_CARDS; this_dev++) { - if (io[this_dev] == 0) { - if (this_dev != 0) break; /* only autoprobe 1st one */ - printk(KERN_NOTICE "hp.c: Presently autoprobing (not recommended) for a single card.\n"); - } - dev = alloc_eip_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - if (do_hp_probe(dev) == 0) { - dev_hp[found++] = dev; - continue; - } - free_netdev(dev); - printk(KERN_WARNING "hp.c: No HP card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - free_irq(dev->irq, dev); - release_region(dev->base_addr - NIC_OFFSET, HP_IO_EXTENT); -} - -void __exit -cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_HP_CARDS; this_dev++) { - struct net_device *dev = dev_hp[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index e4ff389..ed956e0 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -135,7 +135,6 @@ config ETHOC source "drivers/net/ethernet/packetengines/Kconfig" source "drivers/net/ethernet/pasemi/Kconfig" source "drivers/net/ethernet/qlogic/Kconfig" -source "drivers/net/ethernet/racal/Kconfig" source "drivers/net/ethernet/realtek/Kconfig" source "drivers/net/ethernet/renesas/Kconfig" source "drivers/net/ethernet/rdc/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index d447307..8268d85 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -53,7 +53,6 @@ obj-$(CONFIG_ETHOC) += ethoc.o obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ -obj-$(CONFIG_NET_VENDOR_RACAL) += racal/ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ obj-$(CONFIG_SH_ETH) += renesas/ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index 3046133..13d74aa 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -105,19 +105,6 @@ config DECLANCE DEC (now Compaq) based on the AMD LANCE chipset, including the DEPCA series. (This chipset is better known via the NE2100 cards.) -config DEPCA - tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support" - depends on (ISA || EISA) - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto> as well as - <file:drivers/net/ethernet/amd/depca.c>. - - To compile this driver as a module, choose M here. The module - will be called depca. - config HPLANCE bool "HP on-board LANCE support" depends on DIO diff --git a/drivers/net/ethernet/amd/Makefile b/drivers/net/ethernet/amd/Makefile index 175caa5..cdd4301 100644 --- a/drivers/net/ethernet/amd/Makefile +++ b/drivers/net/ethernet/amd/Makefile @@ -8,7 +8,6 @@ obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o obj-$(CONFIG_ARIADNE) += ariadne.o obj-$(CONFIG_ATARILANCE) += atarilance.o obj-$(CONFIG_DECLANCE) += declance.o -obj-$(CONFIG_DEPCA) += depca.o obj-$(CONFIG_HPLANCE) += hplance.o 7990.o obj-$(CONFIG_LANCE) += lance.o obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o diff --git a/drivers/net/ethernet/amd/depca.c b/drivers/net/ethernet/amd/depca.c deleted file mode 100644 index 34a4853..0000000 --- a/drivers/net/ethernet/amd/depca.c +++ /dev/null @@ -1,1910 +0,0 @@ -/* depca.c: A DIGITAL DEPCA & EtherWORKS ethernet driver for linux. - - Written 1994, 1995 by David C. Davies. - - - Copyright 1994 David C. Davies - and - United States Government - (as represented by the Director, National Security Agency). - - Copyright 1995 Digital Equipment Corporation. - - - This software may be used and distributed according to the terms of - the GNU General Public License, incorporated herein by reference. - - This driver is written for the Digital Equipment Corporation series - of DEPCA and EtherWORKS ethernet cards: - - DEPCA (the original) - DE100 - DE101 - DE200 Turbo - DE201 Turbo - DE202 Turbo (TP BNC) - DE210 - DE422 (EISA) - - The driver has been tested on DE100, DE200 and DE202 cards in a - relatively busy network. The DE422 has been tested a little. - - This driver will NOT work for the DE203, DE204 and DE205 series of - cards, since they have a new custom ASIC in place of the AMD LANCE - chip. See the 'ewrk3.c' driver in the Linux source tree for running - those cards. - - I have benchmarked the driver with a DE100 at 595kB/s to (542kB/s from) - a DECstation 5000/200. - - The author may be reached at davies@maniac.ultranet.com - - ========================================================================= - - The driver was originally based on the 'lance.c' driver from Donald - Becker which is included with the standard driver distribution for - linux. V0.4 is a complete re-write with only the kernel interface - remaining from the original code. - - 1) Lance.c code in /linux/drivers/net/ - 2) "Ethernet/IEEE 802.3 Family. 1992 World Network Data Book/Handbook", - AMD, 1992 [(800) 222-9323]. - 3) "Am79C90 CMOS Local Area Network Controller for Ethernet (C-LANCE)", - AMD, Pub. #17881, May 1993. - 4) "Am79C960 PCnet-ISA(tm), Single-Chip Ethernet Controller for ISA", - AMD, Pub. #16907, May 1992 - 5) "DEC EtherWORKS LC Ethernet Controller Owners Manual", - Digital Equipment corporation, 1990, Pub. #EK-DE100-OM.003 - 6) "DEC EtherWORKS Turbo Ethernet Controller Owners Manual", - Digital Equipment corporation, 1990, Pub. #EK-DE200-OM.003 - 7) "DEPCA Hardware Reference Manual", Pub. #EK-DEPCA-PR - Digital Equipment Corporation, 1989 - 8) "DEC EtherWORKS Turbo_(TP BNC) Ethernet Controller Owners Manual", - Digital Equipment corporation, 1991, Pub. #EK-DE202-OM.001 - - - Peter Bauer's depca.c (V0.5) was referred to when debugging V0.1 of this - driver. - - The original DEPCA card requires that the ethernet ROM address counter - be enabled to count and has an 8 bit NICSR. The ROM counter enabling is - only done when a 0x08 is read as the first address octet (to minimise - the chances of writing over some other hardware's I/O register). The - NICSR accesses have been changed to byte accesses for all the cards - supported by this driver, since there is only one useful bit in the MSB - (remote boot timeout) and it is not used. Also, there is a maximum of - only 48kB network RAM for this card. My thanks to Torbjorn Lindh for - help debugging all this (and holding my feet to the fire until I got it - right). - - The DE200 series boards have on-board 64kB RAM for use as a shared - memory network buffer. Only the DE100 cards make use of a 2kB buffer - mode which has not been implemented in this driver (only the 32kB and - 64kB modes are supported [16kB/48kB for the original DEPCA]). - - At the most only 2 DEPCA cards can be supported on the ISA bus because - there is only provision for two I/O base addresses on each card (0x300 - and 0x200). The I/O address is detected by searching for a byte sequence - in the Ethernet station address PROM at the expected I/O address for the - Ethernet PROM. The shared memory base address is 'autoprobed' by - looking for the self test PROM and detecting the card name. When a - second DEPCA is detected, information is placed in the base_addr - variable of the next device structure (which is created if necessary), - thus enabling ethif_probe initialization for the device. More than 2 - EISA cards can be supported, but care will be needed assigning the - shared memory to ensure that each slot has the correct IRQ, I/O address - and shared memory address assigned. - - ************************************************************************ - - NOTE: If you are using two ISA DEPCAs, it is important that you assign - the base memory addresses correctly. The driver autoprobes I/O 0x300 - then 0x200. The base memory address for the first device must be less - than that of the second so that the auto probe will correctly assign the - I/O and memory addresses on the same card. I can't think of a way to do - this unambiguously at the moment, since there is nothing on the cards to - tie I/O and memory information together. - - I am unable to test 2 cards together for now, so this code is - unchecked. All reports, good or bad, are welcome. - - ************************************************************************ - - The board IRQ setting must be at an unused IRQ which is auto-probed - using Donald Becker's autoprobe routines. DEPCA and DE100 board IRQs are - {2,3,4,5,7}, whereas the DE200 is at {5,9,10,11,15}. Note that IRQ2 is - really IRQ9 in machines with 16 IRQ lines. - - No 16MB memory limitation should exist with this driver as DMA is not - used and the common memory area is in low memory on the network card (my - current system has 20MB and I've not had problems yet). - - The ability to load this driver as a loadable module has been added. To - utilise this ability, you have to do <8 things: - - 0) have a copy of the loadable modules code installed on your system. - 1) copy depca.c from the /linux/drivers/net directory to your favourite - temporary directory. - 2) if you wish, edit the source code near line 1530 to reflect the I/O - address and IRQ you're using (see also 5). - 3) compile depca.c, but include -DMODULE in the command line to ensure - that the correct bits are compiled (see end of source code). - 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a - kernel with the depca configuration turned off and reboot. - 5) insmod depca.o [irq=7] [io=0x200] [mem=0xd0000] [adapter_name=DE100] - [Alan Cox: Changed the code to allow command line irq/io assignments] - [Dave Davies: Changed the code to allow command line mem/name - assignments] - 6) run the net startup bits for your eth?? interface manually - (usually /etc/rc.inet[12] at boot time). - 7) enjoy! - - Note that autoprobing is not allowed in loadable modules - the system is - already up and running and you're messing with interrupts. - - To unload a module, turn off the associated interface - 'ifconfig eth?? down' then 'rmmod depca'. - - To assign a base memory address for the shared memory when running as a - loadable module, see 5 above. To include the adapter name (if you have - no PROM but know the card name) also see 5 above. Note that this last - option will not work with kernel built-in depca's. - - The shared memory assignment for a loadable module makes sense to avoid - the 'memory autoprobe' picking the wrong shared memory (for the case of - 2 depca's in a PC). - - ************************************************************************ - Support for MCA EtherWORKS cards added 11-3-98. (MCA since deleted) - Verified to work with up to 2 DE212 cards in a system (although not - fully stress-tested). - - Revision History - ---------------- - - Version Date Description - - 0.1 25-jan-94 Initial writing. - 0.2 27-jan-94 Added LANCE TX hardware buffer chaining. - 0.3 1-feb-94 Added multiple DEPCA support. - 0.31 4-feb-94 Added DE202 recognition. - 0.32 19-feb-94 Tidy up. Improve multi-DEPCA support. - 0.33 25-feb-94 Fix DEPCA ethernet ROM counter enable. - Add jabber packet fix from murf@perftech.com - and becker@super.org - 0.34 7-mar-94 Fix DEPCA max network memory RAM & NICSR access. - 0.35 8-mar-94 Added DE201 recognition. Tidied up. - 0.351 30-apr-94 Added EISA support. Added DE422 recognition. - 0.36 16-may-94 DE422 fix released. - 0.37 22-jul-94 Added MODULE support - 0.38 15-aug-94 Added DBR ROM switch in depca_close(). - Multi DEPCA bug fix. - 0.38axp 15-sep-94 Special version for Alpha AXP Linux V1.0. - 0.381 12-dec-94 Added DE101 recognition, fix multicast bug. - 0.382 9-feb-95 Fix recognition bug reported by <bkm@star.rl.ac.uk>. - 0.383 22-feb-95 Fix for conflict with VESA SCSI reported by - <stromain@alf.dec.com> - 0.384 17-mar-95 Fix a ring full bug reported by <bkm@star.rl.ac.uk> - 0.385 3-apr-95 Fix a recognition bug reported by - <ryan.niemi@lastfrontier.com> - 0.386 21-apr-95 Fix the last fix...sorry, must be galloping senility - 0.40 25-May-95 Rewrite for portability & updated. - ALPHA support from <jestabro@amt.tay1.dec.com> - 0.41 26-Jun-95 Added verify_area() calls in depca_ioctl() from - suggestion by <heiko@colossus.escape.de> - 0.42 27-Dec-95 Add 'mem' shared memory assignment for loadable - modules. - Add 'adapter_name' for loadable modules when no PROM. - Both above from a suggestion by - <pchen@woodruffs121.residence.gatech.edu>. - Add new multicasting code. - 0.421 22-Apr-96 Fix alloc_device() bug <jari@markkus2.fimr.fi> - 0.422 29-Apr-96 Fix depca_hw_init() bug <jari@markkus2.fimr.fi> - 0.423 7-Jun-96 Fix module load bug <kmg@barco.be> - 0.43 16-Aug-96 Update alloc_device() to conform to de4x5.c - 0.44 1-Sep-97 Fix *_probe() to test check_region() first - bug - reported by <mmogilvi@elbert.uccs.edu> - 0.45 3-Nov-98 Added support for MCA EtherWORKS (DE210/DE212) cards - by <tymm@computer.org> - 0.451 5-Nov-98 Fixed mca stuff cuz I'm a dummy. <tymm@computer.org> - 0.5 14-Nov-98 Re-spin for 2.1.x kernels. - 0.51 27-Jun-99 Correct received packet length for CRC from - report by <worm@dkik.dk> - 0.52 16-Oct-00 Fixes for 2.3 io memory accesses - Fix show-stopper (ints left masked) in depca_interrupt - by <peterd@pnd-pc.demon.co.uk> - 0.53 12-Jan-01 Release resources on failure, bss tidbits - by acme@conectiva.com.br - 0.54 08-Nov-01 use library crc32 functions - by Matt_Domsch@dell.com - 0.55 01-Mar-03 Use EISA/sysfs framework <maz@wild-wind.fr.eu.org> - - ========================================================================= -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/crc32.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/time.h> -#include <linux/types.h> -#include <linux/unistd.h> -#include <linux/ctype.h> -#include <linux/moduleparam.h> -#include <linux/platform_device.h> -#include <linux/bitops.h> - -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/dma.h> - -#ifdef CONFIG_EISA -#include <linux/eisa.h> -#endif - -#include "depca.h" - -static char version[] __initdata = "depca.c:v0.53 2001/1/12 davies@maniac.ultranet.com\n"; - -#ifdef DEPCA_DEBUG -static int depca_debug = DEPCA_DEBUG; -#else -static int depca_debug = 1; -#endif - -#define DEPCA_NDA 0xffe0 /* No Device Address */ - -#define TX_TIMEOUT (1*HZ) - -/* -** Ethernet PROM defines -*/ -#define PROBE_LENGTH 32 -#define ETH_PROM_SIG 0xAA5500FFUL - -/* -** Set the number of Tx and Rx buffers. Ensure that the memory requested -** here is <= to the amount of shared memory set up by the board switches. -** The number of descriptors MUST BE A POWER OF 2. -** -** total_memory = NUM_RX_DESC*(8+RX_BUFF_SZ) + NUM_TX_DESC*(8+TX_BUFF_SZ) -*/ -#define NUM_RX_DESC 8 /* Number of RX descriptors */ -#define NUM_TX_DESC 8 /* Number of TX descriptors */ -#define RX_BUFF_SZ 1536 /* Buffer size for each Rx buffer */ -#define TX_BUFF_SZ 1536 /* Buffer size for each Tx buffer */ - -/* -** EISA bus defines -*/ -#define DEPCA_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */ - -/* -** ISA Bus defines -*/ -#define DEPCA_RAM_BASE_ADDRESSES {0xc0000,0xd0000,0xe0000,0x00000} -#define DEPCA_TOTAL_SIZE 0x10 - -static struct { - u_long iobase; - struct platform_device *device; -} depca_io_ports[] = { - { 0x300, NULL }, - { 0x200, NULL }, - { 0 , NULL }, -}; - -/* -** Name <-> Adapter mapping -*/ -#define DEPCA_SIGNATURE {"DEPCA",\ - "DE100","DE101",\ - "DE200","DE201","DE202",\ - "DE210","DE212",\ - "DE422",\ - ""} - -static char* __initdata depca_signature[] = DEPCA_SIGNATURE; - -enum depca_type { - DEPCA, de100, de101, de200, de201, de202, de210, de212, de422, unknown -}; - -static char depca_string[] = "depca"; - -static int depca_device_remove (struct device *device); - -#ifdef CONFIG_EISA -static struct eisa_device_id depca_eisa_ids[] = { - { "DEC4220", de422 }, - { "" } -}; -MODULE_DEVICE_TABLE(eisa, depca_eisa_ids); - -static int depca_eisa_probe (struct device *device); - -static struct eisa_driver depca_eisa_driver = { - .id_table = depca_eisa_ids, - .driver = { - .name = depca_string, - .probe = depca_eisa_probe, - .remove = depca_device_remove - } -}; -#endif - -static int depca_isa_probe (struct platform_device *); - -static int depca_isa_remove(struct platform_device *pdev) -{ - return depca_device_remove(&pdev->dev); -} - -static struct platform_driver depca_isa_driver = { - .probe = depca_isa_probe, - .remove = depca_isa_remove, - .driver = { - .name = depca_string, - }, -}; - -/* -** Miscellaneous info... -*/ -#define DEPCA_STRLEN 16 - -/* -** Memory Alignment. Each descriptor is 4 longwords long. To force a -** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and -** DESC_ALIGN. DEPCA_ALIGN aligns the start address of the private memory area -** and hence the RX descriptor ring's first entry. -*/ -#define DEPCA_ALIGN4 ((u_long)4 - 1) /* 1 longword align */ -#define DEPCA_ALIGN8 ((u_long)8 - 1) /* 2 longword (quadword) align */ -#define DEPCA_ALIGN DEPCA_ALIGN8 /* Keep the LANCE happy... */ - -/* -** The DEPCA Rx and Tx ring descriptors. -*/ -struct depca_rx_desc { - volatile s32 base; - s16 buf_length; /* This length is negative 2's complement! */ - s16 msg_length; /* This length is "normal". */ -}; - -struct depca_tx_desc { - volatile s32 base; - s16 length; /* This length is negative 2's complement! */ - s16 misc; /* Errors and TDR info */ -}; - -#define LA_MASK 0x0000ffff /* LANCE address mask for mapping network RAM - to LANCE memory address space */ - -/* -** The Lance initialization block, described in databook, in common memory. -*/ -struct depca_init { - u16 mode; /* Mode register */ - u8 phys_addr[ETH_ALEN]; /* Physical ethernet address */ - u8 mcast_table[8]; /* Multicast Hash Table. */ - u32 rx_ring; /* Rx ring base pointer & ring length */ - u32 tx_ring; /* Tx ring base pointer & ring length */ -}; - -#define DEPCA_PKT_STAT_SZ 16 -#define DEPCA_PKT_BIN_SZ 128 /* Should be >=100 unless you - increase DEPCA_PKT_STAT_SZ */ -struct depca_private { - char adapter_name[DEPCA_STRLEN]; /* /proc/ioports string */ - enum depca_type adapter; /* Adapter type */ - enum { - DEPCA_BUS_ISA = 1, - DEPCA_BUS_EISA, - } depca_bus; /* type of bus */ - struct depca_init init_block; /* Shadow Initialization block */ -/* CPU address space fields */ - struct depca_rx_desc __iomem *rx_ring; /* Pointer to start of RX descriptor ring */ - struct depca_tx_desc __iomem *tx_ring; /* Pointer to start of TX descriptor ring */ - void __iomem *rx_buff[NUM_RX_DESC]; /* CPU virt address of sh'd memory buffs */ - void __iomem *tx_buff[NUM_TX_DESC]; /* CPU virt address of sh'd memory buffs */ - void __iomem *sh_mem; /* CPU mapped virt address of device RAM */ - u_long mem_start; /* Bus address of device RAM (before remap) */ - u_long mem_len; /* device memory size */ -/* Device address space fields */ - u_long device_ram_start; /* Start of RAM in device addr space */ -/* Offsets used in both address spaces */ - u_long rx_ring_offset; /* Offset from start of RAM to rx_ring */ - u_long tx_ring_offset; /* Offset from start of RAM to tx_ring */ - u_long buffs_offset; /* LANCE Rx and Tx buffers start address. */ -/* Kernel-only (not device) fields */ - int rx_new, tx_new; /* The next free ring entry */ - int rx_old, tx_old; /* The ring entries to be free()ed. */ - spinlock_t lock; - struct { /* Private stats counters */ - u32 bins[DEPCA_PKT_STAT_SZ]; - u32 unicast; - u32 multicast; - u32 broadcast; - u32 excessive_collisions; - u32 tx_underruns; - u32 excessive_underruns; - } pktStats; - int txRingMask; /* TX ring mask */ - int rxRingMask; /* RX ring mask */ - s32 rx_rlen; /* log2(rxRingMask+1) for the descriptors */ - s32 tx_rlen; /* log2(txRingMask+1) for the descriptors */ -}; - -/* -** The transmit ring full condition is described by the tx_old and tx_new -** pointers by: -** tx_old = tx_new Empty ring -** tx_old = tx_new+1 Full ring -** tx_old+txRingMask = tx_new Full ring (wrapped condition) -*/ -#define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\ - lp->tx_old+lp->txRingMask-lp->tx_new:\ - lp->tx_old -lp->tx_new-1) - -/* -** Public Functions -*/ -static int depca_open(struct net_device *dev); -static netdev_tx_t depca_start_xmit(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t depca_interrupt(int irq, void *dev_id); -static int depca_close(struct net_device *dev); -static int depca_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static void depca_tx_timeout(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); - -/* -** Private functions -*/ -static void depca_init_ring(struct net_device *dev); -static int depca_rx(struct net_device *dev); -static int depca_tx(struct net_device *dev); - -static void LoadCSRs(struct net_device *dev); -static int InitRestartDepca(struct net_device *dev); -static int DepcaSignature(char *name, u_long paddr); -static int DevicePresent(u_long ioaddr); -static int get_hw_addr(struct net_device *dev); -static void SetMulticastFilter(struct net_device *dev); -static int load_packet(struct net_device *dev, struct sk_buff *skb); -static void depca_dbg_open(struct net_device *dev); - -static u_char de1xx_irq[] __initdata = { 2, 3, 4, 5, 7, 9, 0 }; -static u_char de2xx_irq[] __initdata = { 5, 9, 10, 11, 15, 0 }; -static u_char de422_irq[] __initdata = { 5, 9, 10, 11, 0 }; -static u_char *depca_irq; - -static int irq; -static int io; -static char *adapter_name; -static int mem; /* For loadable module assignment - use insmod mem=0x????? .... */ -module_param (irq, int, 0); -module_param (io, int, 0); -module_param (adapter_name, charp, 0); -module_param (mem, int, 0); -MODULE_PARM_DESC(irq, "DEPCA IRQ number"); -MODULE_PARM_DESC(io, "DEPCA I/O base address"); -MODULE_PARM_DESC(adapter_name, "DEPCA adapter name"); -MODULE_PARM_DESC(mem, "DEPCA shared memory address"); -MODULE_LICENSE("GPL"); - -/* -** Miscellaneous defines... -*/ -#define STOP_DEPCA \ - outw(CSR0, DEPCA_ADDR);\ - outw(STOP, DEPCA_DATA) - -static const struct net_device_ops depca_netdev_ops = { - .ndo_open = depca_open, - .ndo_start_xmit = depca_start_xmit, - .ndo_stop = depca_close, - .ndo_set_rx_mode = set_multicast_list, - .ndo_do_ioctl = depca_ioctl, - .ndo_tx_timeout = depca_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init depca_hw_init (struct net_device *dev, struct device *device) -{ - struct depca_private *lp; - int i, j, offset, netRAM, mem_len, status = 0; - s16 nicsr; - u_long ioaddr; - u_long mem_start; - - /* - * We are now supposed to enter this function with the - * following fields filled with proper values : - * - * dev->base_addr - * lp->mem_start - * lp->depca_bus - * lp->adapter - * - * dev->irq can be set if known from device configuration (on - * MCA or EISA) or module option. Otherwise, it will be auto - * detected. - */ - - ioaddr = dev->base_addr; - - STOP_DEPCA; - - nicsr = inb(DEPCA_NICSR); - nicsr = ((nicsr & ~SHE & ~RBE & ~IEN) | IM); - outb(nicsr, DEPCA_NICSR); - - if (inw(DEPCA_DATA) != STOP) { - return -ENXIO; - } - - lp = netdev_priv(dev); - mem_start = lp->mem_start; - - if (!mem_start || lp->adapter < DEPCA || lp->adapter >=unknown) - return -ENXIO; - - printk("%s: %s at 0x%04lx", - dev_name(device), depca_signature[lp->adapter], ioaddr); - - switch (lp->depca_bus) { -#ifdef CONFIG_EISA - case DEPCA_BUS_EISA: - printk(" (EISA slot %d)", to_eisa_device(device)->slot); - break; -#endif - - case DEPCA_BUS_ISA: - break; - - default: - printk("Unknown DEPCA bus %d\n", lp->depca_bus); - return -ENXIO; - } - - printk(", h/w address "); - status = get_hw_addr(dev); - printk("%pM", dev->dev_addr); - if (status != 0) { - printk(" which has an Ethernet PROM CRC error.\n"); - return -ENXIO; - } - - /* Set up the maximum amount of network RAM(kB) */ - netRAM = ((lp->adapter != DEPCA) ? 64 : 48); - if ((nicsr & _128KB) && (lp->adapter == de422)) - netRAM = 128; - - /* Shared Memory Base Address */ - if (nicsr & BUF) { - nicsr &= ~BS; /* DEPCA RAM in top 32k */ - netRAM -= 32; - mem_start += 0x8000; - } - - if ((mem_len = (NUM_RX_DESC * (sizeof(struct depca_rx_desc) + RX_BUFF_SZ) + NUM_TX_DESC * (sizeof(struct depca_tx_desc) + TX_BUFF_SZ) + sizeof(struct depca_init))) - > (netRAM << 10)) { - printk(",\n requests %dkB RAM: only %dkB is available!\n", (mem_len >> 10), netRAM); - return -ENXIO; - } - - printk(",\n has %dkB RAM at 0x%.5lx", netRAM, mem_start); - - /* Enable the shadow RAM. */ - if (lp->adapter != DEPCA) { - nicsr |= SHE; - outb(nicsr, DEPCA_NICSR); - } - - spin_lock_init(&lp->lock); - sprintf(lp->adapter_name, "%s (%s)", - depca_signature[lp->adapter], dev_name(device)); - status = -EBUSY; - - /* Initialisation Block */ - if (!request_mem_region (mem_start, mem_len, lp->adapter_name)) { - printk(KERN_ERR "depca: cannot request ISA memory, aborting\n"); - goto out_priv; - } - - status = -EIO; - lp->sh_mem = ioremap(mem_start, mem_len); - if (lp->sh_mem == NULL) { - printk(KERN_ERR "depca: cannot remap ISA memory, aborting\n"); - goto out1; - } - - lp->mem_start = mem_start; - lp->mem_len = mem_len; - lp->device_ram_start = mem_start & LA_MASK; - - offset = 0; - offset += sizeof(struct depca_init); - - /* Tx & Rx descriptors (aligned to a quadword boundary) */ - offset = (offset + DEPCA_ALIGN) & ~DEPCA_ALIGN; - lp->rx_ring = lp->sh_mem + offset; - lp->rx_ring_offset = offset; - - offset += (sizeof(struct depca_rx_desc) * NUM_RX_DESC); - lp->tx_ring = lp->sh_mem + offset; - lp->tx_ring_offset = offset; - - offset += (sizeof(struct depca_tx_desc) * NUM_TX_DESC); - - lp->buffs_offset = offset; - - /* Finish initialising the ring information. */ - lp->rxRingMask = NUM_RX_DESC - 1; - lp->txRingMask = NUM_TX_DESC - 1; - - /* Calculate Tx/Rx RLEN size for the descriptors. */ - for (i = 0, j = lp->rxRingMask; j > 0; i++) { - j >>= 1; - } - lp->rx_rlen = (s32) (i << 29); - for (i = 0, j = lp->txRingMask; j > 0; i++) { - j >>= 1; - } - lp->tx_rlen = (s32) (i << 29); - - /* Load the initialisation block */ - depca_init_ring(dev); - - /* Initialise the control and status registers */ - LoadCSRs(dev); - - /* Enable DEPCA board interrupts for autoprobing */ - nicsr = ((nicsr & ~IM) | IEN); - outb(nicsr, DEPCA_NICSR); - - /* To auto-IRQ we enable the initialization-done and DMA err, - interrupts. For now we will always get a DMA error. */ - if (dev->irq < 2) { - unsigned char irqnum; - unsigned long irq_mask, delay; - - irq_mask = probe_irq_on(); - - /* Assign the correct irq list */ - switch (lp->adapter) { - case DEPCA: - case de100: - case de101: - depca_irq = de1xx_irq; - break; - case de200: - case de201: - case de202: - case de210: - case de212: - depca_irq = de2xx_irq; - break; - case de422: - depca_irq = de422_irq; - break; - - default: - break; /* Not reached */ - } - - /* Trigger an initialization just for the interrupt. */ - outw(INEA | INIT, DEPCA_DATA); - - delay = jiffies + HZ/50; - while (time_before(jiffies, delay)) - yield(); - - irqnum = probe_irq_off(irq_mask); - - status = -ENXIO; - if (!irqnum) { - printk(" and failed to detect IRQ line.\n"); - goto out2; - } else { - for (dev->irq = 0, i = 0; (depca_irq[i]) && (!dev->irq); i++) - if (irqnum == depca_irq[i]) { - dev->irq = irqnum; - printk(" and uses IRQ%d.\n", dev->irq); - } - - if (!dev->irq) { - printk(" but incorrect IRQ line detected.\n"); - goto out2; - } - } - } else { - printk(" and assigned IRQ%d.\n", dev->irq); - } - - if (depca_debug > 1) { - printk(version); - } - - /* The DEPCA-specific entries in the device structure. */ - dev->netdev_ops = &depca_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - - dev->mem_start = 0; - - dev_set_drvdata(device, dev); - SET_NETDEV_DEV (dev, device); - - status = register_netdev(dev); - if (status == 0) - return 0; -out2: - iounmap(lp->sh_mem); -out1: - release_mem_region (mem_start, mem_len); -out_priv: - return status; -} - - -static int depca_open(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_long ioaddr = dev->base_addr; - s16 nicsr; - int status = 0; - - STOP_DEPCA; - nicsr = inb(DEPCA_NICSR); - - /* Make sure the shadow RAM is enabled */ - if (lp->adapter != DEPCA) { - nicsr |= SHE; - outb(nicsr, DEPCA_NICSR); - } - - /* Re-initialize the DEPCA... */ - depca_init_ring(dev); - LoadCSRs(dev); - - depca_dbg_open(dev); - - if (request_irq(dev->irq, depca_interrupt, 0, lp->adapter_name, dev)) { - printk("depca_open(): Requested IRQ%d is busy\n", dev->irq); - status = -EAGAIN; - } else { - - /* Enable DEPCA board interrupts and turn off LED */ - nicsr = ((nicsr & ~IM & ~LED) | IEN); - outb(nicsr, DEPCA_NICSR); - outw(CSR0, DEPCA_ADDR); - - netif_start_queue(dev); - - status = InitRestartDepca(dev); - - if (depca_debug > 1) { - printk("CSR0: 0x%4.4x\n", inw(DEPCA_DATA)); - printk("nicsr: 0x%02x\n", inb(DEPCA_NICSR)); - } - } - return status; -} - -/* Initialize the lance Rx and Tx descriptor rings. */ -static void depca_init_ring(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_int i; - u_long offset; - - /* Lock out other processes whilst setting up the hardware */ - netif_stop_queue(dev); - - lp->rx_new = lp->tx_new = 0; - lp->rx_old = lp->tx_old = 0; - - /* Initialize the base address and length of each buffer in the ring */ - for (i = 0; i <= lp->rxRingMask; i++) { - offset = lp->buffs_offset + i * RX_BUFF_SZ; - writel((lp->device_ram_start + offset) | R_OWN, &lp->rx_ring[i].base); - writew(-RX_BUFF_SZ, &lp->rx_ring[i].buf_length); - lp->rx_buff[i] = lp->sh_mem + offset; - } - - for (i = 0; i <= lp->txRingMask; i++) { - offset = lp->buffs_offset + (i + lp->rxRingMask + 1) * TX_BUFF_SZ; - writel((lp->device_ram_start + offset) & 0x00ffffff, &lp->tx_ring[i].base); - lp->tx_buff[i] = lp->sh_mem + offset; - } - - /* Set up the initialization block */ - lp->init_block.rx_ring = (lp->device_ram_start + lp->rx_ring_offset) | lp->rx_rlen; - lp->init_block.tx_ring = (lp->device_ram_start + lp->tx_ring_offset) | lp->tx_rlen; - - SetMulticastFilter(dev); - - for (i = 0; i < ETH_ALEN; i++) { - lp->init_block.phys_addr[i] = dev->dev_addr[i]; - } - - lp->init_block.mode = 0x0000; /* Enable the Tx and Rx */ -} - - -static void depca_tx_timeout(struct net_device *dev) -{ - u_long ioaddr = dev->base_addr; - - printk("%s: transmit timed out, status %04x, resetting.\n", dev->name, inw(DEPCA_DATA)); - - STOP_DEPCA; - depca_init_ring(dev); - LoadCSRs(dev); - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); - InitRestartDepca(dev); -} - - -/* -** Writes a socket buffer to TX descriptor ring and starts transmission -*/ -static netdev_tx_t depca_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_long ioaddr = dev->base_addr; - int status = 0; - - /* Transmitter timeout, serious problems. */ - if (skb->len < 1) - goto out; - - if (skb_padto(skb, ETH_ZLEN)) - goto out; - - netif_stop_queue(dev); - - if (TX_BUFFS_AVAIL) { /* Fill in a Tx ring entry */ - status = load_packet(dev, skb); - - if (!status) { - /* Trigger an immediate send demand. */ - outw(CSR0, DEPCA_ADDR); - outw(INEA | TDMD, DEPCA_DATA); - - dev_kfree_skb(skb); - } - if (TX_BUFFS_AVAIL) - netif_start_queue(dev); - } else - status = NETDEV_TX_LOCKED; - - out: - return status; -} - -/* -** The DEPCA interrupt handler. -*/ -static irqreturn_t depca_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct depca_private *lp; - s16 csr0, nicsr; - u_long ioaddr; - - if (dev == NULL) { - printk("depca_interrupt(): irq %d for unknown device.\n", irq); - return IRQ_NONE; - } - - lp = netdev_priv(dev); - ioaddr = dev->base_addr; - - spin_lock(&lp->lock); - - /* mask the DEPCA board interrupts and turn on the LED */ - nicsr = inb(DEPCA_NICSR); - nicsr |= (IM | LED); - outb(nicsr, DEPCA_NICSR); - - outw(CSR0, DEPCA_ADDR); - csr0 = inw(DEPCA_DATA); - - /* Acknowledge all of the current interrupt sources ASAP. */ - outw(csr0 & INTE, DEPCA_DATA); - - if (csr0 & RINT) /* Rx interrupt (packet arrived) */ - depca_rx(dev); - - if (csr0 & TINT) /* Tx interrupt (packet sent) */ - depca_tx(dev); - - /* Any resources available? */ - if ((TX_BUFFS_AVAIL >= 0) && netif_queue_stopped(dev)) { - netif_wake_queue(dev); - } - - /* Unmask the DEPCA board interrupts and turn off the LED */ - nicsr = (nicsr & ~IM & ~LED); - outb(nicsr, DEPCA_NICSR); - - spin_unlock(&lp->lock); - return IRQ_HANDLED; -} - -/* Called with lp->lock held */ -static int depca_rx(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - int i, entry; - s32 status; - - for (entry = lp->rx_new; !(readl(&lp->rx_ring[entry].base) & R_OWN); entry = lp->rx_new) { - status = readl(&lp->rx_ring[entry].base) >> 16; - if (status & R_STP) { /* Remember start of frame */ - lp->rx_old = entry; - } - if (status & R_ENP) { /* Valid frame status */ - if (status & R_ERR) { /* There was an error. */ - dev->stats.rx_errors++; /* Update the error stats. */ - if (status & R_FRAM) - dev->stats.rx_frame_errors++; - if (status & R_OFLO) - dev->stats.rx_over_errors++; - if (status & R_CRC) - dev->stats.rx_crc_errors++; - if (status & R_BUFF) - dev->stats.rx_fifo_errors++; - } else { - short len, pkt_len = readw(&lp->rx_ring[entry].msg_length) - 4; - struct sk_buff *skb; - - skb = netdev_alloc_skb(dev, pkt_len + 2); - if (skb != NULL) { - unsigned char *buf; - skb_reserve(skb, 2); /* 16 byte align the IP header */ - buf = skb_put(skb, pkt_len); - if (entry < lp->rx_old) { /* Wrapped buffer */ - len = (lp->rxRingMask - lp->rx_old + 1) * RX_BUFF_SZ; - memcpy_fromio(buf, lp->rx_buff[lp->rx_old], len); - memcpy_fromio(buf + len, lp->rx_buff[0], pkt_len - len); - } else { /* Linear buffer */ - memcpy_fromio(buf, lp->rx_buff[lp->rx_old], pkt_len); - } - - /* - ** Notify the upper protocol layers that there is another - ** packet to handle - */ - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - - /* - ** Update stats - */ - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - for (i = 1; i < DEPCA_PKT_STAT_SZ - 1; i++) { - if (pkt_len < (i * DEPCA_PKT_BIN_SZ)) { - lp->pktStats.bins[i]++; - i = DEPCA_PKT_STAT_SZ; - } - } - if (is_multicast_ether_addr(buf)) { - if (is_broadcast_ether_addr(buf)) { - lp->pktStats.broadcast++; - } else { - lp->pktStats.multicast++; - } - } else if (ether_addr_equal(buf, - dev->dev_addr)) { - lp->pktStats.unicast++; - } - - lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */ - if (lp->pktStats.bins[0] == 0) { /* Reset counters */ - memset((char *) &lp->pktStats, 0, sizeof(lp->pktStats)); - } - } else { - printk("%s: Memory squeeze, deferring packet.\n", dev->name); - dev->stats.rx_dropped++; /* Really, deferred. */ - break; - } - } - /* Change buffer ownership for this last frame, back to the adapter */ - for (; lp->rx_old != entry; lp->rx_old = (lp->rx_old + 1) & lp->rxRingMask) { - writel(readl(&lp->rx_ring[lp->rx_old].base) | R_OWN, &lp->rx_ring[lp->rx_old].base); - } - writel(readl(&lp->rx_ring[entry].base) | R_OWN, &lp->rx_ring[entry].base); - } - - /* - ** Update entry information - */ - lp->rx_new = (lp->rx_new + 1) & lp->rxRingMask; - } - - return 0; -} - -/* -** Buffer sent - check for buffer errors. -** Called with lp->lock held -*/ -static int depca_tx(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - int entry; - s32 status; - u_long ioaddr = dev->base_addr; - - for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) { - status = readl(&lp->tx_ring[entry].base) >> 16; - - if (status < 0) { /* Packet not yet sent! */ - break; - } else if (status & T_ERR) { /* An error occurred. */ - status = readl(&lp->tx_ring[entry].misc); - dev->stats.tx_errors++; - if (status & TMD3_RTRY) - dev->stats.tx_aborted_errors++; - if (status & TMD3_LCAR) - dev->stats.tx_carrier_errors++; - if (status & TMD3_LCOL) - dev->stats.tx_window_errors++; - if (status & TMD3_UFLO) - dev->stats.tx_fifo_errors++; - if (status & (TMD3_BUFF | TMD3_UFLO)) { - /* Trigger an immediate send demand. */ - outw(CSR0, DEPCA_ADDR); - outw(INEA | TDMD, DEPCA_DATA); - } - } else if (status & (T_MORE | T_ONE)) { - dev->stats.collisions++; - } else { - dev->stats.tx_packets++; - } - - /* Update all the pointers */ - lp->tx_old = (lp->tx_old + 1) & lp->txRingMask; - } - - return 0; -} - -static int depca_close(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - s16 nicsr; - u_long ioaddr = dev->base_addr; - - netif_stop_queue(dev); - - outw(CSR0, DEPCA_ADDR); - - if (depca_debug > 1) { - printk("%s: Shutting down ethercard, status was %2.2x.\n", dev->name, inw(DEPCA_DATA)); - } - - /* - ** We stop the DEPCA here -- it occasionally polls - ** memory if we don't. - */ - outw(STOP, DEPCA_DATA); - - /* - ** Give back the ROM in case the user wants to go to DOS - */ - if (lp->adapter != DEPCA) { - nicsr = inb(DEPCA_NICSR); - nicsr &= ~SHE; - outb(nicsr, DEPCA_NICSR); - } - - /* - ** Free the associated irq - */ - free_irq(dev->irq, dev); - return 0; -} - -static void LoadCSRs(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_long ioaddr = dev->base_addr; - - outw(CSR1, DEPCA_ADDR); /* initialisation block address LSW */ - outw((u16) lp->device_ram_start, DEPCA_DATA); - outw(CSR2, DEPCA_ADDR); /* initialisation block address MSW */ - outw((u16) (lp->device_ram_start >> 16), DEPCA_DATA); - outw(CSR3, DEPCA_ADDR); /* ALE control */ - outw(ACON, DEPCA_DATA); - - outw(CSR0, DEPCA_ADDR); /* Point back to CSR0 */ -} - -static int InitRestartDepca(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_long ioaddr = dev->base_addr; - int i, status = 0; - - /* Copy the shadow init_block to shared memory */ - memcpy_toio(lp->sh_mem, &lp->init_block, sizeof(struct depca_init)); - - outw(CSR0, DEPCA_ADDR); /* point back to CSR0 */ - outw(INIT, DEPCA_DATA); /* initialize DEPCA */ - - /* wait for lance to complete initialisation */ - for (i = 0; (i < 100) && !(inw(DEPCA_DATA) & IDON); i++); - - if (i != 100) { - /* clear IDON by writing a "1", enable interrupts and start lance */ - outw(IDON | INEA | STRT, DEPCA_DATA); - if (depca_debug > 2) { - printk("%s: DEPCA open after %d ticks, init block 0x%08lx csr0 %4.4x.\n", dev->name, i, lp->mem_start, inw(DEPCA_DATA)); - } - } else { - printk("%s: DEPCA unopen after %d ticks, init block 0x%08lx csr0 %4.4x.\n", dev->name, i, lp->mem_start, inw(DEPCA_DATA)); - status = -1; - } - - return status; -} - -/* -** Set or clear the multicast filter for this adaptor. -*/ -static void set_multicast_list(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_long ioaddr = dev->base_addr; - - netif_stop_queue(dev); - while (lp->tx_old != lp->tx_new); /* Wait for the ring to empty */ - - STOP_DEPCA; /* Temporarily stop the depca. */ - depca_init_ring(dev); /* Initialize the descriptor rings */ - - if (dev->flags & IFF_PROMISC) { /* Set promiscuous mode */ - lp->init_block.mode |= PROM; - } else { - SetMulticastFilter(dev); - lp->init_block.mode &= ~PROM; /* Unset promiscuous mode */ - } - - LoadCSRs(dev); /* Reload CSR3 */ - InitRestartDepca(dev); /* Resume normal operation. */ - netif_start_queue(dev); /* Unlock the TX ring */ -} - -/* -** Calculate the hash code and update the logical address filter -** from a list of ethernet multicast addresses. -** Big endian crc one liner is mine, all mine, ha ha ha ha! -** LANCE calculates its hash codes big endian. -*/ -static void SetMulticastFilter(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - struct netdev_hw_addr *ha; - int i, j, bit, byte; - u16 hashcode; - u32 crc; - - if (dev->flags & IFF_ALLMULTI) { /* Set all multicast bits */ - for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) { - lp->init_block.mcast_table[i] = (char) 0xff; - } - } else { - for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) { /* Clear the multicast table */ - lp->init_block.mcast_table[i] = 0; - } - /* Add multicast addresses */ - netdev_for_each_mc_addr(ha, dev) { - crc = ether_crc(ETH_ALEN, ha->addr); - hashcode = (crc & 1); /* hashcode is 6 LSb of CRC ... */ - for (j = 0; j < 5; j++) { /* ... in reverse order. */ - hashcode = (hashcode << 1) | ((crc >>= 1) & 1); - } - - byte = hashcode >> 3; /* bit[3-5] -> byte in filter */ - bit = 1 << (hashcode & 0x07); /* bit[0-2] -> bit in byte */ - lp->init_block.mcast_table[byte] |= bit; - } - } -} - -static int __init depca_common_init (u_long ioaddr, struct net_device **devp) -{ - int status = 0; - - if (!request_region (ioaddr, DEPCA_TOTAL_SIZE, depca_string)) { - status = -EBUSY; - goto out; - } - - if (DevicePresent(ioaddr)) { - status = -ENODEV; - goto out_release; - } - - if (!(*devp = alloc_etherdev (sizeof (struct depca_private)))) { - status = -ENOMEM; - goto out_release; - } - - return 0; - - out_release: - release_region (ioaddr, DEPCA_TOTAL_SIZE); - out: - return status; -} - -/* -** ISA bus I/O device probe -*/ - -static void __init depca_platform_probe (void) -{ - int i; - struct platform_device *pldev; - - for (i = 0; depca_io_ports[i].iobase; i++) { - depca_io_ports[i].device = NULL; - - /* if an address has been specified on the command - * line, use it (if valid) */ - if (io && io != depca_io_ports[i].iobase) - continue; - - pldev = platform_device_alloc(depca_string, i); - if (!pldev) - continue; - - pldev->dev.platform_data = (void *) depca_io_ports[i].iobase; - depca_io_ports[i].device = pldev; - - if (platform_device_add(pldev)) { - depca_io_ports[i].device = NULL; - pldev->dev.platform_data = NULL; - platform_device_put(pldev); - continue; - } - - if (!pldev->dev.driver) { - /* The driver was not bound to this device, there was - * no hardware at this address. Unregister it, as the - * release function will take care of freeing the - * allocated structure */ - - depca_io_ports[i].device = NULL; - pldev->dev.platform_data = NULL; - platform_device_unregister (pldev); - } - } -} - -static enum depca_type __init depca_shmem_probe (ulong *mem_start) -{ - u_long mem_base[] = DEPCA_RAM_BASE_ADDRESSES; - enum depca_type adapter = unknown; - int i; - - for (i = 0; mem_base[i]; i++) { - *mem_start = mem ? mem : mem_base[i]; - adapter = DepcaSignature (adapter_name, *mem_start); - if (adapter != unknown) - break; - } - - return adapter; -} - -static int depca_isa_probe(struct platform_device *device) -{ - struct net_device *dev; - struct depca_private *lp; - u_long ioaddr, mem_start = 0; - enum depca_type adapter = unknown; - int status = 0; - - ioaddr = (u_long) device->dev.platform_data; - - if ((status = depca_common_init (ioaddr, &dev))) - goto out; - - adapter = depca_shmem_probe (&mem_start); - - if (adapter == unknown) { - status = -ENODEV; - goto out_free; - } - - dev->base_addr = ioaddr; - dev->irq = irq; /* Use whatever value the user gave - * us, and 0 if he didn't. */ - lp = netdev_priv(dev); - lp->depca_bus = DEPCA_BUS_ISA; - lp->adapter = adapter; - lp->mem_start = mem_start; - - if ((status = depca_hw_init(dev, &device->dev))) - goto out_free; - - return 0; - - out_free: - free_netdev (dev); - release_region (ioaddr, DEPCA_TOTAL_SIZE); - out: - return status; -} - -/* -** EISA callbacks from sysfs. -*/ - -#ifdef CONFIG_EISA -static int __init depca_eisa_probe (struct device *device) -{ - enum depca_type adapter = unknown; - struct eisa_device *edev; - struct net_device *dev; - struct depca_private *lp; - u_long ioaddr, mem_start; - int status = 0; - - edev = to_eisa_device (device); - ioaddr = edev->base_addr + DEPCA_EISA_IO_PORTS; - - if ((status = depca_common_init (ioaddr, &dev))) - goto out; - - /* It would have been nice to get card configuration from the - * card. Unfortunately, this register is write-only (shares - * it's address with the ethernet prom)... As we don't parse - * the EISA configuration structures (yet... :-), just rely on - * the ISA probing to sort it out... */ - - adapter = depca_shmem_probe (&mem_start); - if (adapter == unknown) { - status = -ENODEV; - goto out_free; - } - - dev->base_addr = ioaddr; - dev->irq = irq; - lp = netdev_priv(dev); - lp->depca_bus = DEPCA_BUS_EISA; - lp->adapter = edev->id.driver_data; - lp->mem_start = mem_start; - - if ((status = depca_hw_init(dev, device))) - goto out_free; - - return 0; - - out_free: - free_netdev (dev); - release_region (ioaddr, DEPCA_TOTAL_SIZE); - out: - return status; -} -#endif - -static int depca_device_remove(struct device *device) -{ - struct net_device *dev; - struct depca_private *lp; - int bus; - - dev = dev_get_drvdata(device); - lp = netdev_priv(dev); - - unregister_netdev (dev); - iounmap (lp->sh_mem); - release_mem_region (lp->mem_start, lp->mem_len); - release_region (dev->base_addr, DEPCA_TOTAL_SIZE); - bus = lp->depca_bus; - free_netdev (dev); - - return 0; -} - -/* -** Look for a particular board name in the on-board Remote Diagnostics -** and Boot (readb) ROM. This will also give us a clue to the network RAM -** base address. -*/ -static int __init DepcaSignature(char *name, u_long base_addr) -{ - u_int i, j, k; - void __iomem *ptr; - char tmpstr[16]; - u_long prom_addr = base_addr + 0xc000; - u_long mem_addr = base_addr + 0x8000; /* 32KB */ - - /* Can't reserve the prom region, it is already marked as - * used, at least on x86. Instead, reserve a memory region a - * board would certainly use. If it works, go ahead. If not, - * run like hell... */ - - if (!request_mem_region (mem_addr, 16, depca_string)) - return unknown; - - /* Copy the first 16 bytes of ROM */ - - ptr = ioremap(prom_addr, 16); - if (ptr == NULL) { - printk(KERN_ERR "depca: I/O remap failed at %lx\n", prom_addr); - return unknown; - } - for (i = 0; i < 16; i++) { - tmpstr[i] = readb(ptr + i); - } - iounmap(ptr); - - release_mem_region (mem_addr, 16); - - /* Check if PROM contains a valid string */ - for (i = 0; *depca_signature[i] != '\0'; i++) { - for (j = 0, k = 0; j < 16 && k < strlen(depca_signature[i]); j++) { - if (depca_signature[i][k] == tmpstr[j]) { /* track signature */ - k++; - } else { /* lost signature; begin search again */ - k = 0; - } - } - if (k == strlen(depca_signature[i])) - break; - } - - /* Check if name string is valid, provided there's no PROM */ - if (name && *name && (i == unknown)) { - for (i = 0; *depca_signature[i] != '\0'; i++) { - if (strcmp(name, depca_signature[i]) == 0) - break; - } - } - - return i; -} - -/* -** Look for a special sequence in the Ethernet station address PROM that -** is common across all DEPCA products. Note that the original DEPCA needs -** its ROM address counter to be initialized and enabled. Only enable -** if the first address octet is a 0x08 - this minimises the chances of -** messing around with some other hardware, but it assumes that this DEPCA -** card initialized itself correctly. -** -** Search the Ethernet address ROM for the signature. Since the ROM address -** counter can start at an arbitrary point, the search must include the entire -** probe sequence length plus the (length_of_the_signature - 1). -** Stop the search IMMEDIATELY after the signature is found so that the -** PROM address counter is correctly positioned at the start of the -** ethernet address for later read out. -*/ -static int __init DevicePresent(u_long ioaddr) -{ - union { - struct { - u32 a; - u32 b; - } llsig; - char Sig[sizeof(u32) << 1]; - } - dev; - short sigLength = 0; - s8 data; - s16 nicsr; - int i, j, status = 0; - - data = inb(DEPCA_PROM); /* clear counter on DEPCA */ - data = inb(DEPCA_PROM); /* read data */ - - if (data == 0x08) { /* Enable counter on DEPCA */ - nicsr = inb(DEPCA_NICSR); - nicsr |= AAC; - outb(nicsr, DEPCA_NICSR); - } - - dev.llsig.a = ETH_PROM_SIG; - dev.llsig.b = ETH_PROM_SIG; - sigLength = sizeof(u32) << 1; - - for (i = 0, j = 0; j < sigLength && i < PROBE_LENGTH + sigLength - 1; i++) { - data = inb(DEPCA_PROM); - if (dev.Sig[j] == data) { /* track signature */ - j++; - } else { /* lost signature; begin search again */ - if (data == dev.Sig[0]) { /* rare case.... */ - j = 1; - } else { - j = 0; - } - } - } - - if (j != sigLength) { - status = -ENODEV; /* search failed */ - } - - return status; -} - -/* -** The DE100 and DE101 PROM accesses were made non-standard for some bizarre -** reason: access the upper half of the PROM with x=0; access the lower half -** with x=1. -*/ -static int __init get_hw_addr(struct net_device *dev) -{ - u_long ioaddr = dev->base_addr; - struct depca_private *lp = netdev_priv(dev); - int i, k, tmp, status = 0; - u_short j, x, chksum; - - x = (((lp->adapter == de100) || (lp->adapter == de101)) ? 1 : 0); - - for (i = 0, k = 0, j = 0; j < 3; j++) { - k <<= 1; - if (k > 0xffff) - k -= 0xffff; - - k += (u_char) (tmp = inb(DEPCA_PROM + x)); - dev->dev_addr[i++] = (u_char) tmp; - k += (u_short) ((tmp = inb(DEPCA_PROM + x)) << 8); - dev->dev_addr[i++] = (u_char) tmp; - - if (k > 0xffff) - k -= 0xffff; - } - if (k == 0xffff) - k = 0; - - chksum = (u_char) inb(DEPCA_PROM + x); - chksum |= (u_short) (inb(DEPCA_PROM + x) << 8); - if (k != chksum) - status = -1; - - return status; -} - -/* -** Load a packet into the shared memory -*/ -static int load_packet(struct net_device *dev, struct sk_buff *skb) -{ - struct depca_private *lp = netdev_priv(dev); - int i, entry, end, len, status = NETDEV_TX_OK; - - entry = lp->tx_new; /* Ring around buffer number. */ - end = (entry + (skb->len - 1) / TX_BUFF_SZ) & lp->txRingMask; - if (!(readl(&lp->tx_ring[end].base) & T_OWN)) { /* Enough room? */ - /* - ** Caution: the write order is important here... don't set up the - ** ownership rights until all the other information is in place. - */ - if (end < entry) { /* wrapped buffer */ - len = (lp->txRingMask - entry + 1) * TX_BUFF_SZ; - memcpy_toio(lp->tx_buff[entry], skb->data, len); - memcpy_toio(lp->tx_buff[0], skb->data + len, skb->len - len); - } else { /* linear buffer */ - memcpy_toio(lp->tx_buff[entry], skb->data, skb->len); - } - - /* set up the buffer descriptors */ - len = (skb->len < ETH_ZLEN) ? ETH_ZLEN : skb->len; - for (i = entry; i != end; i = (i+1) & lp->txRingMask) { - /* clean out flags */ - writel(readl(&lp->tx_ring[i].base) & ~T_FLAGS, &lp->tx_ring[i].base); - writew(0x0000, &lp->tx_ring[i].misc); /* clears other error flags */ - writew(-TX_BUFF_SZ, &lp->tx_ring[i].length); /* packet length in buffer */ - len -= TX_BUFF_SZ; - } - /* clean out flags */ - writel(readl(&lp->tx_ring[end].base) & ~T_FLAGS, &lp->tx_ring[end].base); - writew(0x0000, &lp->tx_ring[end].misc); /* clears other error flags */ - writew(-len, &lp->tx_ring[end].length); /* packet length in last buff */ - - /* start of packet */ - writel(readl(&lp->tx_ring[entry].base) | T_STP, &lp->tx_ring[entry].base); - /* end of packet */ - writel(readl(&lp->tx_ring[end].base) | T_ENP, &lp->tx_ring[end].base); - - for (i = end; i != entry; --i) { - /* ownership of packet */ - writel(readl(&lp->tx_ring[i].base) | T_OWN, &lp->tx_ring[i].base); - if (i == 0) - i = lp->txRingMask + 1; - } - writel(readl(&lp->tx_ring[entry].base) | T_OWN, &lp->tx_ring[entry].base); - - lp->tx_new = (++end) & lp->txRingMask; /* update current pointers */ - } else { - status = NETDEV_TX_LOCKED; - } - - return status; -} - -static void depca_dbg_open(struct net_device *dev) -{ - struct depca_private *lp = netdev_priv(dev); - u_long ioaddr = dev->base_addr; - struct depca_init *p = &lp->init_block; - int i; - - if (depca_debug > 1) { - /* Do not copy the shadow init block into shared memory */ - /* Debugging should not affect normal operation! */ - /* The shadow init block will get copied across during InitRestartDepca */ - printk("%s: depca open with irq %d\n", dev->name, dev->irq); - printk("Descriptor head addresses (CPU):\n"); - printk(" 0x%lx 0x%lx\n", (u_long) lp->rx_ring, (u_long) lp->tx_ring); - printk("Descriptor addresses (CPU):\nRX: "); - for (i = 0; i < lp->rxRingMask; i++) { - if (i < 3) { - printk("%p ", &lp->rx_ring[i].base); - } - } - printk("...%p\n", &lp->rx_ring[i].base); - printk("TX: "); - for (i = 0; i < lp->txRingMask; i++) { - if (i < 3) { - printk("%p ", &lp->tx_ring[i].base); - } - } - printk("...%p\n", &lp->tx_ring[i].base); - printk("\nDescriptor buffers (Device):\nRX: "); - for (i = 0; i < lp->rxRingMask; i++) { - if (i < 3) { - printk("0x%8.8x ", readl(&lp->rx_ring[i].base)); - } - } - printk("...0x%8.8x\n", readl(&lp->rx_ring[i].base)); - printk("TX: "); - for (i = 0; i < lp->txRingMask; i++) { - if (i < 3) { - printk("0x%8.8x ", readl(&lp->tx_ring[i].base)); - } - } - printk("...0x%8.8x\n", readl(&lp->tx_ring[i].base)); - printk("Initialisation block at 0x%8.8lx(Phys)\n", lp->mem_start); - printk(" mode: 0x%4.4x\n", p->mode); - printk(" physical address: %pM\n", p->phys_addr); - printk(" multicast hash table: "); - for (i = 0; i < (HASH_TABLE_LEN >> 3) - 1; i++) { - printk("%2.2x:", p->mcast_table[i]); - } - printk("%2.2x\n", p->mcast_table[i]); - printk(" rx_ring at: 0x%8.8x\n", p->rx_ring); - printk(" tx_ring at: 0x%8.8x\n", p->tx_ring); - printk("buffers (Phys): 0x%8.8lx\n", lp->mem_start + lp->buffs_offset); - printk("Ring size:\nRX: %d Log2(rxRingMask): 0x%8.8x\n", (int) lp->rxRingMask + 1, lp->rx_rlen); - printk("TX: %d Log2(txRingMask): 0x%8.8x\n", (int) lp->txRingMask + 1, lp->tx_rlen); - outw(CSR2, DEPCA_ADDR); - printk("CSR2&1: 0x%4.4x", inw(DEPCA_DATA)); - outw(CSR1, DEPCA_ADDR); - printk("%4.4x\n", inw(DEPCA_DATA)); - outw(CSR3, DEPCA_ADDR); - printk("CSR3: 0x%4.4x\n", inw(DEPCA_DATA)); - } -} - -/* -** Perform IOCTL call functions here. Some are privileged operations and the -** effective uid is checked in those cases. -** All multicast IOCTLs will not work here and are for testing purposes only. -*/ -static int depca_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct depca_private *lp = netdev_priv(dev); - struct depca_ioctl *ioc = (struct depca_ioctl *) &rq->ifr_ifru; - int i, status = 0; - u_long ioaddr = dev->base_addr; - union { - u8 addr[(HASH_TABLE_LEN * ETH_ALEN)]; - u16 sval[(HASH_TABLE_LEN * ETH_ALEN) >> 1]; - u32 lval[(HASH_TABLE_LEN * ETH_ALEN) >> 2]; - } tmp; - unsigned long flags; - void *buf; - - switch (ioc->cmd) { - case DEPCA_GET_HWADDR: /* Get the hardware address */ - for (i = 0; i < ETH_ALEN; i++) { - tmp.addr[i] = dev->dev_addr[i]; - } - ioc->len = ETH_ALEN; - if (copy_to_user(ioc->data, tmp.addr, ioc->len)) - return -EFAULT; - break; - - case DEPCA_SET_HWADDR: /* Set the hardware address */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN)) - return -EFAULT; - for (i = 0; i < ETH_ALEN; i++) { - dev->dev_addr[i] = tmp.addr[i]; - } - netif_stop_queue(dev); - while (lp->tx_old != lp->tx_new) - cpu_relax(); /* Wait for the ring to empty */ - - STOP_DEPCA; /* Temporarily stop the depca. */ - depca_init_ring(dev); /* Initialize the descriptor rings */ - LoadCSRs(dev); /* Reload CSR3 */ - InitRestartDepca(dev); /* Resume normal operation. */ - netif_start_queue(dev); /* Unlock the TX ring */ - break; - - case DEPCA_SET_PROM: /* Set Promiscuous Mode */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - netif_stop_queue(dev); - while (lp->tx_old != lp->tx_new) - cpu_relax(); /* Wait for the ring to empty */ - - STOP_DEPCA; /* Temporarily stop the depca. */ - depca_init_ring(dev); /* Initialize the descriptor rings */ - lp->init_block.mode |= PROM; /* Set promiscuous mode */ - - LoadCSRs(dev); /* Reload CSR3 */ - InitRestartDepca(dev); /* Resume normal operation. */ - netif_start_queue(dev); /* Unlock the TX ring */ - break; - - case DEPCA_CLR_PROM: /* Clear Promiscuous Mode */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - netif_stop_queue(dev); - while (lp->tx_old != lp->tx_new) - cpu_relax(); /* Wait for the ring to empty */ - - STOP_DEPCA; /* Temporarily stop the depca. */ - depca_init_ring(dev); /* Initialize the descriptor rings */ - lp->init_block.mode &= ~PROM; /* Clear promiscuous mode */ - - LoadCSRs(dev); /* Reload CSR3 */ - InitRestartDepca(dev); /* Resume normal operation. */ - netif_start_queue(dev); /* Unlock the TX ring */ - break; - - case DEPCA_SAY_BOO: /* Say "Boo!" to the kernel log file */ - if(!capable(CAP_NET_ADMIN)) - return -EPERM; - printk("%s: Boo!\n", dev->name); - break; - - case DEPCA_GET_MCA: /* Get the multicast address table */ - ioc->len = (HASH_TABLE_LEN >> 3); - if (copy_to_user(ioc->data, lp->init_block.mcast_table, ioc->len)) - return -EFAULT; - break; - - case DEPCA_SET_MCA: /* Set a multicast address */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (ioc->len >= HASH_TABLE_LEN) - return -EINVAL; - if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN * ioc->len)) - return -EFAULT; - set_multicast_list(dev); - break; - - case DEPCA_CLR_MCA: /* Clear all multicast addresses */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - set_multicast_list(dev); - break; - - case DEPCA_MCA_EN: /* Enable pass all multicast addressing */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - set_multicast_list(dev); - break; - - case DEPCA_GET_STATS: /* Get the driver statistics */ - ioc->len = sizeof(lp->pktStats); - buf = kmalloc(ioc->len, GFP_KERNEL); - if(!buf) - return -ENOMEM; - spin_lock_irqsave(&lp->lock, flags); - memcpy(buf, &lp->pktStats, ioc->len); - spin_unlock_irqrestore(&lp->lock, flags); - if (copy_to_user(ioc->data, buf, ioc->len)) - status = -EFAULT; - kfree(buf); - break; - - case DEPCA_CLR_STATS: /* Zero out the driver statistics */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - spin_lock_irqsave(&lp->lock, flags); - memset(&lp->pktStats, 0, sizeof(lp->pktStats)); - spin_unlock_irqrestore(&lp->lock, flags); - break; - - case DEPCA_GET_REG: /* Get the DEPCA Registers */ - i = 0; - tmp.sval[i++] = inw(DEPCA_NICSR); - outw(CSR0, DEPCA_ADDR); /* status register */ - tmp.sval[i++] = inw(DEPCA_DATA); - memcpy(&tmp.sval[i], &lp->init_block, sizeof(struct depca_init)); - ioc->len = i + sizeof(struct depca_init); - if (copy_to_user(ioc->data, tmp.addr, ioc->len)) - return -EFAULT; - break; - - default: - return -EOPNOTSUPP; - } - - return status; -} - -static int __init depca_module_init (void) -{ - int err = 0; - -#ifdef CONFIG_EISA - err = eisa_driver_register(&depca_eisa_driver); - if (err) - goto err_eisa; -#endif - err = platform_driver_register(&depca_isa_driver); - if (err) - goto err_eisa; - - depca_platform_probe(); - return 0; - -err_eisa: -#ifdef CONFIG_EISA - eisa_driver_unregister(&depca_eisa_driver); -#endif - return err; -} - -static void __exit depca_module_exit (void) -{ - int i; -#ifdef CONFIG_EISA - eisa_driver_unregister (&depca_eisa_driver); -#endif - platform_driver_unregister (&depca_isa_driver); - - for (i = 0; depca_io_ports[i].iobase; i++) { - if (depca_io_ports[i].device) { - depca_io_ports[i].device->dev.platform_data = NULL; - platform_device_unregister (depca_io_ports[i].device); - depca_io_ports[i].device = NULL; - } - } -} - -module_init (depca_module_init); -module_exit (depca_module_exit); diff --git a/drivers/net/ethernet/amd/depca.h b/drivers/net/ethernet/amd/depca.h deleted file mode 100644 index cdcfe42..0000000 --- a/drivers/net/ethernet/amd/depca.h +++ /dev/null @@ -1,183 +0,0 @@ -/* - Written 1994 by David C. Davies. - - Copyright 1994 David C. Davies. This software may be used and distributed - according to the terms of the GNU General Public License, incorporated herein by - reference. -*/ - -/* -** I/O addresses. Note that the 2k buffer option is not supported in -** this driver. -*/ -#define DEPCA_NICSR ioaddr+0x00 /* Network interface CSR */ -#define DEPCA_RBI ioaddr+0x02 /* RAM buffer index (2k buffer mode) */ -#define DEPCA_DATA ioaddr+0x04 /* LANCE registers' data port */ -#define DEPCA_ADDR ioaddr+0x06 /* LANCE registers' address port */ -#define DEPCA_HBASE ioaddr+0x08 /* EISA high memory base address reg. */ -#define DEPCA_PROM ioaddr+0x0c /* Ethernet address ROM data port */ -#define DEPCA_CNFG ioaddr+0x0c /* EISA Configuration port */ -#define DEPCA_RBSA ioaddr+0x0e /* RAM buffer starting address (2k buff.) */ - -/* -** These are LANCE registers addressable through DEPCA_ADDR -*/ -#define CSR0 0 -#define CSR1 1 -#define CSR2 2 -#define CSR3 3 - -/* -** NETWORK INTERFACE CSR (NI_CSR) bit definitions -*/ - -#define TO 0x0100 /* Time Out for remote boot */ -#define SHE 0x0080 /* SHadow memory Enable */ -#define BS 0x0040 /* Bank Select */ -#define BUF 0x0020 /* BUFfer size (1->32k, 0->64k) */ -#define RBE 0x0010 /* Remote Boot Enable (1->net boot) */ -#define AAC 0x0008 /* Address ROM Address Counter (1->enable) */ -#define _128KB 0x0008 /* 128kB Network RAM (1->enable) */ -#define IM 0x0004 /* Interrupt Mask (1->mask) */ -#define IEN 0x0002 /* Interrupt tristate ENable (1->enable) */ -#define LED 0x0001 /* LED control */ - -/* -** Control and Status Register 0 (CSR0) bit definitions -*/ - -#define ERR 0x8000 /* Error summary */ -#define BABL 0x4000 /* Babble transmitter timeout error */ -#define CERR 0x2000 /* Collision Error */ -#define MISS 0x1000 /* Missed packet */ -#define MERR 0x0800 /* Memory Error */ -#define RINT 0x0400 /* Receiver Interrupt */ -#define TINT 0x0200 /* Transmit Interrupt */ -#define IDON 0x0100 /* Initialization Done */ -#define INTR 0x0080 /* Interrupt Flag */ -#define INEA 0x0040 /* Interrupt Enable */ -#define RXON 0x0020 /* Receiver on */ -#define TXON 0x0010 /* Transmitter on */ -#define TDMD 0x0008 /* Transmit Demand */ -#define STOP 0x0004 /* Stop */ -#define STRT 0x0002 /* Start */ -#define INIT 0x0001 /* Initialize */ -#define INTM 0xff00 /* Interrupt Mask */ -#define INTE 0xfff0 /* Interrupt Enable */ - -/* -** CONTROL AND STATUS REGISTER 3 (CSR3) -*/ - -#define BSWP 0x0004 /* Byte SWaP */ -#define ACON 0x0002 /* ALE control */ -#define BCON 0x0001 /* Byte CONtrol */ - -/* -** Initialization Block Mode Register -*/ - -#define PROM 0x8000 /* Promiscuous Mode */ -#define EMBA 0x0080 /* Enable Modified Back-off Algorithm */ -#define INTL 0x0040 /* Internal Loopback */ -#define DRTY 0x0020 /* Disable Retry */ -#define COLL 0x0010 /* Force Collision */ -#define DTCR 0x0008 /* Disable Transmit CRC */ -#define LOOP 0x0004 /* Loopback */ -#define DTX 0x0002 /* Disable the Transmitter */ -#define DRX 0x0001 /* Disable the Receiver */ - -/* -** Receive Message Descriptor 1 (RMD1) bit definitions. -*/ - -#define R_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */ -#define R_ERR 0x4000 /* Error Summary */ -#define R_FRAM 0x2000 /* Framing Error */ -#define R_OFLO 0x1000 /* Overflow Error */ -#define R_CRC 0x0800 /* CRC Error */ -#define R_BUFF 0x0400 /* Buffer Error */ -#define R_STP 0x0200 /* Start of Packet */ -#define R_ENP 0x0100 /* End of Packet */ - -/* -** Transmit Message Descriptor 1 (TMD1) bit definitions. -*/ - -#define T_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */ -#define T_ERR 0x4000 /* Error Summary */ -#define T_ADD_FCS 0x2000 /* More the 1 retry needed to Xmit */ -#define T_MORE 0x1000 /* >1 retry to transmit packet */ -#define T_ONE 0x0800 /* 1 try needed to transmit the packet */ -#define T_DEF 0x0400 /* Deferred */ -#define T_STP 0x02000000 /* Start of Packet */ -#define T_ENP 0x01000000 /* End of Packet */ -#define T_FLAGS 0xff000000 /* TX Flags Field */ - -/* -** Transmit Message Descriptor 3 (TMD3) bit definitions. -*/ - -#define TMD3_BUFF 0x8000 /* BUFFer error */ -#define TMD3_UFLO 0x4000 /* UnderFLOw error */ -#define TMD3_RES 0x2000 /* REServed */ -#define TMD3_LCOL 0x1000 /* Late COLlision */ -#define TMD3_LCAR 0x0800 /* Loss of CARrier */ -#define TMD3_RTRY 0x0400 /* ReTRY error */ - -/* -** EISA configuration Register (CNFG) bit definitions -*/ - -#define TIMEOUT 0x0100 /* 0:2.5 mins, 1: 30 secs */ -#define REMOTE 0x0080 /* Remote Boot Enable -> 1 */ -#define IRQ11 0x0040 /* Enable -> 1 */ -#define IRQ10 0x0020 /* Enable -> 1 */ -#define IRQ9 0x0010 /* Enable -> 1 */ -#define IRQ5 0x0008 /* Enable -> 1 */ -#define BUFF 0x0004 /* 0: 64kB or 128kB, 1: 32kB */ -#define PADR16 0x0002 /* RAM on 64kB boundary */ -#define PADR17 0x0001 /* RAM on 128kB boundary */ - -/* -** Miscellaneous -*/ -#define HASH_TABLE_LEN 64 /* Bits */ -#define HASH_BITS 0x003f /* 6 LS bits */ - -#define MASK_INTERRUPTS 1 -#define UNMASK_INTERRUPTS 0 - -#define EISA_EN 0x0001 /* Enable EISA bus buffers */ -#define EISA_ID iobase+0x0080 /* ID long word for EISA card */ -#define EISA_CTRL iobase+0x0084 /* Control word for EISA card */ - -/* -** Include the IOCTL stuff -*/ -#include <linux/sockios.h> - -struct depca_ioctl { - unsigned short cmd; /* Command to run */ - unsigned short len; /* Length of the data buffer */ - unsigned char __user *data; /* Pointer to the data buffer */ -}; - -/* -** Recognised commands for the driver -*/ -#define DEPCA_GET_HWADDR 0x01 /* Get the hardware address */ -#define DEPCA_SET_HWADDR 0x02 /* Get the hardware address */ -#define DEPCA_SET_PROM 0x03 /* Set Promiscuous Mode */ -#define DEPCA_CLR_PROM 0x04 /* Clear Promiscuous Mode */ -#define DEPCA_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */ -#define DEPCA_GET_MCA 0x06 /* Get a multicast address */ -#define DEPCA_SET_MCA 0x07 /* Set a multicast address */ -#define DEPCA_CLR_MCA 0x08 /* Clear a multicast address */ -#define DEPCA_MCA_EN 0x09 /* Enable a multicast address group */ -#define DEPCA_GET_STATS 0x0a /* Get the driver statistics */ -#define DEPCA_CLR_STATS 0x0b /* Zero out the driver statistics */ -#define DEPCA_GET_REG 0x0c /* Get the Register contents */ -#define DEPCA_SET_REG 0x0d /* Set the Register contents */ -#define DEPCA_DUMP 0x0f /* Dump the DEPCA Status */ - diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig index 3794027..68262aa 100644 --- a/drivers/net/ethernet/dec/Kconfig +++ b/drivers/net/ethernet/dec/Kconfig @@ -17,21 +17,5 @@ config NET_VENDOR_DEC your specific card in the following questions. if NET_VENDOR_DEC - -config EWRK3 - tristate "EtherWORKS 3 (DE203, DE204, DE205) support" - depends on ISA - select CRC32 - ---help--- - This driver supports the DE203, DE204 and DE205 network (Ethernet) - cards. If this is for you, say Y and read - <file:Documentation/networking/ewrk3.txt> in the kernel source as - well as the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called ewrk3. - source "drivers/net/ethernet/dec/tulip/Kconfig" - endif # NET_VENDOR_DEC diff --git a/drivers/net/ethernet/dec/Makefile b/drivers/net/ethernet/dec/Makefile index 1b01ed8..32993fc 100644 --- a/drivers/net/ethernet/dec/Makefile +++ b/drivers/net/ethernet/dec/Makefile @@ -2,5 +2,4 @@ # Makefile for the Digital Equipment Inc. network device drivers. # -obj-$(CONFIG_EWRK3) += ewrk3.o obj-$(CONFIG_NET_TULIP) += tulip/ diff --git a/drivers/net/ethernet/dec/ewrk3.c b/drivers/net/ethernet/dec/ewrk3.c deleted file mode 100644 index 5015172..0000000 --- a/drivers/net/ethernet/dec/ewrk3.c +++ /dev/null @@ -1,1961 +0,0 @@ -/* ewrk3.c: A DIGITAL EtherWORKS 3 ethernet driver for Linux. - - Written 1994 by David C. Davies. - - Copyright 1994 Digital Equipment Corporation. - - This software may be used and distributed according to the terms of - the GNU General Public License, incorporated herein by reference. - - This driver is written for the Digital Equipment Corporation series - of EtherWORKS ethernet cards: - - DE203 Turbo (BNC) - DE204 Turbo (TP) - DE205 Turbo (TP BNC) - - The driver has been tested on a relatively busy network using the DE205 - card and benchmarked with 'ttcp': it transferred 16M of data at 975kB/s - (7.8Mb/s) to a DECstation 5000/200. - - The author may be reached at davies@maniac.ultranet.com. - - ========================================================================= - This driver has been written substantially from scratch, although its - inheritance of style and stack interface from 'depca.c' and in turn from - Donald Becker's 'lance.c' should be obvious. - - The DE203/4/5 boards all use a new proprietary chip in place of the - LANCE chip used in prior cards (DEPCA, DE100, DE200/1/2, DE210, DE422). - Use the depca.c driver in the standard distribution for the LANCE based - cards from DIGITAL; this driver will not work with them. - - The DE203/4/5 cards have 2 main modes: shared memory and I/O only. I/O - only makes all the card accesses through I/O transactions and no high - (shared) memory is used. This mode provides a >48% performance penalty - and is deprecated in this driver, although allowed to provide initial - setup when hardstrapped. - - The shared memory mode comes in 3 flavours: 2kB, 32kB and 64kB. There is - no point in using any mode other than the 2kB mode - their performances - are virtually identical, although the driver has been tested in the 2kB - and 32kB modes. I would suggest you uncomment the line: - - FORCE_2K_MODE; - - to allow the driver to configure the card as a 2kB card at your current - base address, thus leaving more room to clutter your system box with - other memory hungry boards. - - As many ISA and EISA cards can be supported under this driver as you - wish, limited primarily by the available IRQ lines, rather than by the - available I/O addresses (24 ISA, 16 EISA). I have checked different - configurations of multiple depca cards and ewrk3 cards and have not - found a problem yet (provided you have at least depca.c v0.38) ... - - The board IRQ setting must be at an unused IRQ which is auto-probed - using Donald Becker's autoprobe routines. All these cards are at - {5,10,11,15}. - - No 16MB memory limitation should exist with this driver as DMA is not - used and the common memory area is in low memory on the network card (my - current system has 20MB and I've not had problems yet). - - The ability to load this driver as a loadable module has been included - and used extensively during the driver development (to save those long - reboot sequences). To utilise this ability, you have to do 8 things: - - 0) have a copy of the loadable modules code installed on your system. - 1) copy ewrk3.c from the /linux/drivers/net directory to your favourite - temporary directory. - 2) edit the source code near line 1898 to reflect the I/O address and - IRQ you're using. - 3) compile ewrk3.c, but include -DMODULE in the command line to ensure - that the correct bits are compiled (see end of source code). - 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a - kernel with the ewrk3 configuration turned off and reboot. - 5) insmod ewrk3.o - [Alan Cox: Changed this so you can insmod ewrk3.o irq=x io=y] - [Adam Kropelin: now accepts irq=x1,x2 io=y1,y2 for multiple cards] - 6) run the net startup bits for your new eth?? interface manually - (usually /etc/rc.inet[12] at boot time). - 7) enjoy! - - Note that autoprobing is not allowed in loadable modules - the system is - already up and running and you're messing with interrupts. - - To unload a module, turn off the associated interface - 'ifconfig eth?? down' then 'rmmod ewrk3'. - - Promiscuous mode has been turned off in this driver, but all the - multicast address bits have been turned on. This improved the send - performance on a busy network by about 13%. - - Ioctl's have now been provided (primarily because I wanted to grab some - packet size statistics). They are patterned after 'plipconfig.c' from a - suggestion by Alan Cox. Using these ioctls, you can enable promiscuous - mode, add/delete multicast addresses, change the hardware address, get - packet size distribution statistics and muck around with the control and - status register. I'll add others if and when the need arises. - - TO DO: - ------ - - - Revision History - ---------------- - - Version Date Description - - 0.1 26-aug-94 Initial writing. ALPHA code release. - 0.11 31-aug-94 Fixed: 2k mode memory base calc., - LeMAC version calc., - IRQ vector assignments during autoprobe. - 0.12 31-aug-94 Tested working on LeMAC2 (DE20[345]-AC) card. - Fixed up MCA hash table algorithm. - 0.20 4-sep-94 Added IOCTL functionality. - 0.21 14-sep-94 Added I/O mode. - 0.21axp 15-sep-94 Special version for ALPHA AXP Linux V1.0. - 0.22 16-sep-94 Added more IOCTLs & tidied up. - 0.23 21-sep-94 Added transmit cut through. - 0.24 31-oct-94 Added uid checks in some ioctls. - 0.30 1-nov-94 BETA code release. - 0.31 5-dec-94 Added check/allocate region code. - 0.32 16-jan-95 Broadcast packet fix. - 0.33 10-Feb-95 Fix recognition bug reported by <bkm@star.rl.ac.uk>. - 0.40 27-Dec-95 Rationalise MODULE and autoprobe code. - Rewrite for portability & updated. - ALPHA support from <jestabro@amt.tay1.dec.com> - Added verify_area() calls in ewrk3_ioctl() from - suggestion by <heiko@colossus.escape.de>. - Add new multicasting code. - 0.41 20-Jan-96 Fix IRQ set up problem reported by - <kenneth@bbs.sas.ntu.ac.sg>. - 0.42 22-Apr-96 Fix alloc_device() bug <jari@markkus2.fimr.fi> - 0.43 16-Aug-96 Update alloc_device() to conform to de4x5.c - 0.44 08-Nov-01 use library crc32 functions <Matt_Domsch@dell.com> - 0.45 19-Jul-02 fix unaligned access on alpha <martin@bruli.net> - 0.46 10-Oct-02 Multiple NIC support when module <akropel1@rochester.rr.com> - 0.47 18-Oct-02 ethtool support <akropel1@rochester.rr.com> - 0.48 18-Oct-02 cli/sti removal for 2.5 <vda@port.imtp.ilyichevsk.odessa.ua> - ioctl locking, signature search cleanup <akropel1@rochester.rr.com> - - ========================================================================= - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/crc32.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/ethtool.h> -#include <linux/time.h> -#include <linux/types.h> -#include <linux/unistd.h> -#include <linux/ctype.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/dma.h> -#include <asm/uaccess.h> - -#include "ewrk3.h" - -#define DRV_NAME "ewrk3" -#define DRV_VERSION "0.48" - -static char version[] __initdata = -DRV_NAME ":v" DRV_VERSION " 2002/10/18 davies@maniac.ultranet.com\n"; - -#ifdef EWRK3_DEBUG -static int ewrk3_debug = EWRK3_DEBUG; -#else -static int ewrk3_debug = 1; -#endif - -#define EWRK3_NDA 0xffe0 /* No Device Address */ - -#define PROBE_LENGTH 32 -#define ETH_PROM_SIG 0xAA5500FFUL - -#ifndef EWRK3_SIGNATURE -#define EWRK3_SIGNATURE {"DE203","DE204","DE205",""} -#define EWRK3_STRLEN 8 -#endif - -#ifndef EWRK3_RAM_BASE_ADDRESSES -#define EWRK3_RAM_BASE_ADDRESSES {0xc0000,0xd0000,0x00000} -#endif - -/* - ** Sets up the I/O area for the autoprobe. - */ -#define EWRK3_IO_BASE 0x100 /* Start address for probe search */ -#define EWRK3_IOP_INC 0x20 /* I/O address increment */ -#define EWRK3_TOTAL_SIZE 0x20 /* required I/O address length */ - -#ifndef MAX_NUM_EWRK3S -#define MAX_NUM_EWRK3S 21 -#endif - -#ifndef EWRK3_EISA_IO_PORTS -#define EWRK3_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */ -#endif - -#ifndef MAX_EISA_SLOTS -#define MAX_EISA_SLOTS 16 -#define EISA_SLOT_INC 0x1000 -#endif - -#define QUEUE_PKT_TIMEOUT (1*HZ) /* Jiffies */ - -/* - ** EtherWORKS 3 shared memory window sizes - */ -#define IO_ONLY 0x00 -#define SHMEM_2K 0x800 -#define SHMEM_32K 0x8000 -#define SHMEM_64K 0x10000 - -/* - ** EtherWORKS 3 IRQ ENABLE/DISABLE - */ -#define ENABLE_IRQs { \ - icr |= lp->irq_mask;\ - outb(icr, EWRK3_ICR); /* Enable the IRQs */\ -} - -#define DISABLE_IRQs { \ - icr = inb(EWRK3_ICR);\ - icr &= ~lp->irq_mask;\ - outb(icr, EWRK3_ICR); /* Disable the IRQs */\ -} - -/* - ** EtherWORKS 3 START/STOP - */ -#define START_EWRK3 { \ - csr = inb(EWRK3_CSR);\ - csr &= ~(CSR_TXD|CSR_RXD);\ - outb(csr, EWRK3_CSR); /* Enable the TX and/or RX */\ -} - -#define STOP_EWRK3 { \ - csr = (CSR_TXD|CSR_RXD);\ - outb(csr, EWRK3_CSR); /* Disable the TX and/or RX */\ -} - -/* - ** The EtherWORKS 3 private structure - */ -#define EWRK3_PKT_STAT_SZ 16 -#define EWRK3_PKT_BIN_SZ 128 /* Should be >=100 unless you - increase EWRK3_PKT_STAT_SZ */ - -struct ewrk3_stats { - u32 bins[EWRK3_PKT_STAT_SZ]; - u32 unicast; - u32 multicast; - u32 broadcast; - u32 excessive_collisions; - u32 tx_underruns; - u32 excessive_underruns; -}; - -struct ewrk3_private { - char adapter_name[80]; /* Name exported to /proc/ioports */ - u_long shmem_base; /* Shared memory start address */ - void __iomem *shmem; - u_long shmem_length; /* Shared memory window length */ - struct ewrk3_stats pktStats; /* Private stats counters */ - u_char irq_mask; /* Adapter IRQ mask bits */ - u_char mPage; /* Maximum 2kB Page number */ - u_char lemac; /* Chip rev. level */ - u_char hard_strapped; /* Don't allow a full open */ - u_char txc; /* Transmit cut through */ - void __iomem *mctbl; /* Pointer to the multicast table */ - u_char led_mask; /* Used to reserve LED access for ethtool */ - spinlock_t hw_lock; -}; - -/* - ** Force the EtherWORKS 3 card to be in 2kB MODE - */ -#define FORCE_2K_MODE { \ - shmem_length = SHMEM_2K;\ - outb(((mem_start - 0x80000) >> 11), EWRK3_MBR);\ -} - -/* - ** Public Functions - */ -static int ewrk3_open(struct net_device *dev); -static netdev_tx_t ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t ewrk3_interrupt(int irq, void *dev_id); -static int ewrk3_close(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); -static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static const struct ethtool_ops ethtool_ops_203; -static const struct ethtool_ops ethtool_ops; - -/* - ** Private functions - */ -static int ewrk3_hw_init(struct net_device *dev, u_long iobase); -static void ewrk3_init(struct net_device *dev); -static int ewrk3_rx(struct net_device *dev); -static int ewrk3_tx(struct net_device *dev); -static void ewrk3_timeout(struct net_device *dev); - -static void EthwrkSignature(char *name, char *eeprom_image); -static int DevicePresent(u_long iobase); -static void SetMulticastFilter(struct net_device *dev); -static int EISA_signature(char *name, s32 eisa_id); - -static int Read_EEPROM(u_long iobase, u_char eaddr); -static int Write_EEPROM(short data, u_long iobase, u_char eaddr); -static u_char get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType); - -static int ewrk3_probe1(struct net_device *dev, u_long iobase, int irq); -static int isa_probe(struct net_device *dev, u_long iobase); -static int eisa_probe(struct net_device *dev, u_long iobase); - -static u_char irq[MAX_NUM_EWRK3S+1] = {5, 0, 10, 3, 11, 9, 15, 12}; - -static char name[EWRK3_STRLEN + 1]; -static int num_ewrks3s; - -/* - ** Miscellaneous defines... - */ -#define INIT_EWRK3 {\ - outb(EEPROM_INIT, EWRK3_IOPR);\ - mdelay(1);\ -} - -#ifndef MODULE -struct net_device * __init ewrk3_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct ewrk3_private)); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - } - - err = ewrk3_probe1(dev, dev->base_addr, dev->irq); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); - -} -#endif - -static int __init ewrk3_probe1(struct net_device *dev, u_long iobase, int irq) -{ - int err; - - dev->base_addr = iobase; - dev->irq = irq; - - /* Address PROM pattern */ - err = isa_probe(dev, iobase); - if (err != 0) - err = eisa_probe(dev, iobase); - - if (err) - return err; - - err = register_netdev(dev); - if (err) - release_region(dev->base_addr, EWRK3_TOTAL_SIZE); - - return err; -} - -static const struct net_device_ops ewrk3_netdev_ops = { - .ndo_open = ewrk3_open, - .ndo_start_xmit = ewrk3_queue_pkt, - .ndo_stop = ewrk3_close, - .ndo_set_rx_mode = set_multicast_list, - .ndo_do_ioctl = ewrk3_ioctl, - .ndo_tx_timeout = ewrk3_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init -ewrk3_hw_init(struct net_device *dev, u_long iobase) -{ - struct ewrk3_private *lp; - int i, status = 0; - u_long mem_start, shmem_length; - u_char cr, cmr, icr, nicsr, lemac, hard_strapped = 0; - u_char eeprom_image[EEPROM_MAX], chksum, eisa_cr = 0; - - /* - ** Stop the EWRK3. Enable the DBR ROM. Disable interrupts and remote boot. - ** This also disables the EISA_ENABLE bit in the EISA Control Register. - */ - if (iobase > 0x400) - eisa_cr = inb(EISA_CR); - INIT_EWRK3; - - nicsr = inb(EWRK3_CSR); - - icr = inb(EWRK3_ICR); - icr &= 0x70; - outb(icr, EWRK3_ICR); /* Disable all the IRQs */ - - if (nicsr != (CSR_TXD | CSR_RXD)) - return -ENXIO; - - /* Check that the EEPROM is alive and well and not living on Pluto... */ - for (chksum = 0, i = 0; i < EEPROM_MAX; i += 2) { - union { - short val; - char c[2]; - } tmp; - - tmp.val = (short) Read_EEPROM(iobase, (i >> 1)); - eeprom_image[i] = tmp.c[0]; - eeprom_image[i + 1] = tmp.c[1]; - chksum += eeprom_image[i] + eeprom_image[i + 1]; - } - - if (chksum != 0) { /* Bad EEPROM Data! */ - printk("%s: Device has a bad on-board EEPROM.\n", dev->name); - return -ENXIO; - } - - EthwrkSignature(name, eeprom_image); - if (*name == '\0') - return -ENXIO; - - dev->base_addr = iobase; - - if (iobase > 0x400) { - outb(eisa_cr, EISA_CR); /* Rewrite the EISA CR */ - } - lemac = eeprom_image[EEPROM_CHIPVER]; - cmr = inb(EWRK3_CMR); - - if (((lemac == LeMAC) && ((cmr & CMR_NO_EEPROM) != CMR_NO_EEPROM)) || - ((lemac == LeMAC2) && !(cmr & CMR_HS))) { - printk("%s: %s at %#4lx", dev->name, name, iobase); - hard_strapped = 1; - } else if ((iobase & 0x0fff) == EWRK3_EISA_IO_PORTS) { - /* EISA slot address */ - printk("%s: %s at %#4lx (EISA slot %ld)", - dev->name, name, iobase, ((iobase >> 12) & 0x0f)); - } else { /* ISA port address */ - printk("%s: %s at %#4lx", dev->name, name, iobase); - } - - printk(", h/w address "); - if (lemac != LeMAC2) - DevicePresent(iobase); /* need after EWRK3_INIT */ - status = get_hw_addr(dev, eeprom_image, lemac); - printk("%pM\n", dev->dev_addr); - - if (status) { - printk(" which has an EEPROM CRC error.\n"); - return -ENXIO; - } - - if (lemac == LeMAC2) { /* Special LeMAC2 CMR things */ - cmr &= ~(CMR_RA | CMR_WB | CMR_LINK | CMR_POLARITY | CMR_0WS); - if (eeprom_image[EEPROM_MISC0] & READ_AHEAD) - cmr |= CMR_RA; - if (eeprom_image[EEPROM_MISC0] & WRITE_BEHIND) - cmr |= CMR_WB; - if (eeprom_image[EEPROM_NETMAN0] & NETMAN_POL) - cmr |= CMR_POLARITY; - if (eeprom_image[EEPROM_NETMAN0] & NETMAN_LINK) - cmr |= CMR_LINK; - if (eeprom_image[EEPROM_MISC0] & _0WS_ENA) - cmr |= CMR_0WS; - } - if (eeprom_image[EEPROM_SETUP] & SETUP_DRAM) - cmr |= CMR_DRAM; - outb(cmr, EWRK3_CMR); - - cr = inb(EWRK3_CR); /* Set up the Control Register */ - cr |= eeprom_image[EEPROM_SETUP] & SETUP_APD; - if (cr & SETUP_APD) - cr |= eeprom_image[EEPROM_SETUP] & SETUP_PS; - cr |= eeprom_image[EEPROM_MISC0] & FAST_BUS; - cr |= eeprom_image[EEPROM_MISC0] & ENA_16; - outb(cr, EWRK3_CR); - - /* - ** Determine the base address and window length for the EWRK3 - ** RAM from the memory base register. - */ - mem_start = inb(EWRK3_MBR); - shmem_length = 0; - if (mem_start != 0) { - if ((mem_start >= 0x0a) && (mem_start <= 0x0f)) { - mem_start *= SHMEM_64K; - shmem_length = SHMEM_64K; - } else if ((mem_start >= 0x14) && (mem_start <= 0x1f)) { - mem_start *= SHMEM_32K; - shmem_length = SHMEM_32K; - } else if ((mem_start >= 0x40) && (mem_start <= 0xff)) { - mem_start = mem_start * SHMEM_2K + 0x80000; - shmem_length = SHMEM_2K; - } else { - return -ENXIO; - } - } - /* - ** See the top of this source code for comments about - ** uncommenting this line. - */ -/* FORCE_2K_MODE; */ - - if (hard_strapped) { - printk(" is hard strapped.\n"); - } else if (mem_start) { - printk(" has a %dk RAM window", (int) (shmem_length >> 10)); - printk(" at 0x%.5lx", mem_start); - } else { - printk(" is in I/O only mode"); - } - - lp = netdev_priv(dev); - lp->shmem_base = mem_start; - lp->shmem = ioremap(mem_start, shmem_length); - if (!lp->shmem) - return -ENOMEM; - lp->shmem_length = shmem_length; - lp->lemac = lemac; - lp->hard_strapped = hard_strapped; - lp->led_mask = CR_LED; - spin_lock_init(&lp->hw_lock); - - lp->mPage = 64; - if (cmr & CMR_DRAM) - lp->mPage <<= 1; /* 2 DRAMS on module */ - - sprintf(lp->adapter_name, "%s (%s)", name, dev->name); - - lp->irq_mask = ICR_TNEM | ICR_TXDM | ICR_RNEM | ICR_RXDM; - - if (!hard_strapped) { - /* - ** Enable EWRK3 board interrupts for autoprobing - */ - icr |= ICR_IE; /* Enable interrupts */ - outb(icr, EWRK3_ICR); - - /* The DMA channel may be passed in on this parameter. */ - dev->dma = 0; - - /* To auto-IRQ we enable the initialization-done and DMA err, - interrupts. For now we will always get a DMA error. */ - if (dev->irq < 2) { -#ifndef MODULE - u_char irqnum; - unsigned long irq_mask; - - - irq_mask = probe_irq_on(); - - /* - ** Trigger a TNE interrupt. - */ - icr |= ICR_TNEM; - outb(1, EWRK3_TDQ); /* Write to the TX done queue */ - outb(icr, EWRK3_ICR); /* Unmask the TXD interrupt */ - - irqnum = irq[((icr & IRQ_SEL) >> 4)]; - - mdelay(20); - dev->irq = probe_irq_off(irq_mask); - if ((dev->irq) && (irqnum == dev->irq)) { - printk(" and uses IRQ%d.\n", dev->irq); - } else { - if (!dev->irq) { - printk(" and failed to detect IRQ line.\n"); - } else if ((irqnum == 1) && (lemac == LeMAC2)) { - printk(" and an illegal IRQ line detected.\n"); - } else { - printk(", but incorrect IRQ line detected.\n"); - } - iounmap(lp->shmem); - return -ENXIO; - } - - DISABLE_IRQs; /* Mask all interrupts */ - -#endif /* MODULE */ - } else { - printk(" and requires IRQ%d.\n", dev->irq); - } - } - - if (ewrk3_debug > 1) { - printk(version); - } - /* The EWRK3-specific entries in the device structure. */ - dev->netdev_ops = &ewrk3_netdev_ops; - if (lp->adapter_name[4] == '3') - SET_ETHTOOL_OPS(dev, ðtool_ops_203); - else - SET_ETHTOOL_OPS(dev, ðtool_ops); - dev->watchdog_timeo = QUEUE_PKT_TIMEOUT; - - dev->mem_start = 0; - - return 0; -} - - -static int ewrk3_open(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int status = 0; - u_char icr, csr; - - /* - ** Stop the TX and RX... - */ - STOP_EWRK3; - - if (!lp->hard_strapped) { - if (request_irq(dev->irq, (void *) ewrk3_interrupt, 0, "ewrk3", dev)) { - printk("ewrk3_open(): Requested IRQ%d is busy\n", dev->irq); - status = -EAGAIN; - } else { - - /* - ** Re-initialize the EWRK3... - */ - ewrk3_init(dev); - - if (ewrk3_debug > 1) { - printk("%s: ewrk3 open with irq %d\n", dev->name, dev->irq); - printk(" physical address: %pM\n", dev->dev_addr); - if (lp->shmem_length == 0) { - printk(" no shared memory, I/O only mode\n"); - } else { - printk(" start of shared memory: 0x%08lx\n", lp->shmem_base); - printk(" window length: 0x%04lx\n", lp->shmem_length); - } - printk(" # of DRAMS: %d\n", ((inb(EWRK3_CMR) & 0x02) ? 2 : 1)); - printk(" csr: 0x%02x\n", inb(EWRK3_CSR)); - printk(" cr: 0x%02x\n", inb(EWRK3_CR)); - printk(" icr: 0x%02x\n", inb(EWRK3_ICR)); - printk(" cmr: 0x%02x\n", inb(EWRK3_CMR)); - printk(" fmqc: 0x%02x\n", inb(EWRK3_FMQC)); - } - netif_start_queue(dev); - /* - ** Unmask EWRK3 board interrupts - */ - icr = inb(EWRK3_ICR); - ENABLE_IRQs; - - } - } else { - printk(KERN_ERR "%s: ewrk3 available for hard strapped set up only.\n", dev->name); - printk(KERN_ERR " Run the 'ewrk3setup' utility or remove the hard straps.\n"); - return -EINVAL; - } - - return status; -} - -/* - ** Initialize the EtherWORKS 3 operating conditions - */ -static void ewrk3_init(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_char csr, page; - u_long iobase = dev->base_addr; - int i; - - /* - ** Enable any multicasts - */ - set_multicast_list(dev); - - /* - ** Set hardware MAC address. Address is initialized from the EEPROM - ** during startup but may have since been changed by the user. - */ - for (i=0; i<ETH_ALEN; i++) - outb(dev->dev_addr[i], EWRK3_PAR0 + i); - - /* - ** Clean out any remaining entries in all the queues here - */ - while (inb(EWRK3_TQ)); - while (inb(EWRK3_TDQ)); - while (inb(EWRK3_RQ)); - while (inb(EWRK3_FMQ)); - - /* - ** Write a clean free memory queue - */ - for (page = 1; page < lp->mPage; page++) { /* Write the free page numbers */ - outb(page, EWRK3_FMQ); /* to the Free Memory Queue */ - } - - START_EWRK3; /* Enable the TX and/or RX */ -} - -/* - * Transmit timeout - */ - -static void ewrk3_timeout(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_char icr, csr; - u_long iobase = dev->base_addr; - - if (!lp->hard_strapped) - { - printk(KERN_WARNING"%s: transmit timed/locked out, status %04x, resetting.\n", - dev->name, inb(EWRK3_CSR)); - - /* - ** Mask all board interrupts - */ - DISABLE_IRQs; - - /* - ** Stop the TX and RX... - */ - STOP_EWRK3; - - ewrk3_init(dev); - - /* - ** Unmask EWRK3 board interrupts - */ - ENABLE_IRQs; - - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); - } -} - -/* - ** Writes a socket buffer to the free page queue - */ -static netdev_tx_t ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - void __iomem *buf = NULL; - u_char icr; - u_char page; - - spin_lock_irq (&lp->hw_lock); - DISABLE_IRQs; - - /* if no resources available, exit, request packet be queued */ - if (inb (EWRK3_FMQC) == 0) { - printk (KERN_WARNING "%s: ewrk3_queue_pkt(): No free resources...\n", - dev->name); - printk (KERN_WARNING "%s: ewrk3_queue_pkt(): CSR: %02x ICR: %02x FMQC: %02x\n", - dev->name, inb (EWRK3_CSR), inb (EWRK3_ICR), - inb (EWRK3_FMQC)); - goto err_out; - } - - /* - ** Get a free page from the FMQ - */ - if ((page = inb (EWRK3_FMQ)) >= lp->mPage) { - printk ("ewrk3_queue_pkt(): Invalid free memory page (%d).\n", - (u_char) page); - goto err_out; - } - - - /* - ** Set up shared memory window and pointer into the window - */ - if (lp->shmem_length == IO_ONLY) { - outb (page, EWRK3_IOPR); - } else if (lp->shmem_length == SHMEM_2K) { - buf = lp->shmem; - outb (page, EWRK3_MPR); - } else if (lp->shmem_length == SHMEM_32K) { - buf = (((short) page << 11) & 0x7800) + lp->shmem; - outb ((page >> 4), EWRK3_MPR); - } else if (lp->shmem_length == SHMEM_64K) { - buf = (((short) page << 11) & 0xf800) + lp->shmem; - outb ((page >> 5), EWRK3_MPR); - } else { - printk (KERN_ERR "%s: Oops - your private data area is hosed!\n", - dev->name); - BUG (); - } - - /* - ** Set up the buffer control structures and copy the data from - ** the socket buffer to the shared memory . - */ - if (lp->shmem_length == IO_ONLY) { - int i; - u_char *p = skb->data; - outb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), EWRK3_DATA); - outb ((char) (skb->len & 0xff), EWRK3_DATA); - outb ((char) ((skb->len >> 8) & 0xff), EWRK3_DATA); - outb ((char) 0x04, EWRK3_DATA); - for (i = 0; i < skb->len; i++) { - outb (*p++, EWRK3_DATA); - } - outb (page, EWRK3_TQ); /* Start sending pkt */ - } else { - writeb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), buf); /* ctrl byte */ - buf += 1; - writeb ((char) (skb->len & 0xff), buf); /* length (16 bit xfer) */ - buf += 1; - if (lp->txc) { - writeb(((skb->len >> 8) & 0xff) | XCT, buf); - buf += 1; - writeb (0x04, buf); /* index byte */ - buf += 1; - writeb (0x00, (buf + skb->len)); /* Write the XCT flag */ - memcpy_toio (buf, skb->data, PRELOAD); /* Write PRELOAD bytes */ - outb (page, EWRK3_TQ); /* Start sending pkt */ - memcpy_toio (buf + PRELOAD, - skb->data + PRELOAD, - skb->len - PRELOAD); - writeb (0xff, (buf + skb->len)); /* Write the XCT flag */ - } else { - writeb ((skb->len >> 8) & 0xff, buf); - buf += 1; - writeb (0x04, buf); /* index byte */ - buf += 1; - memcpy_toio (buf, skb->data, skb->len); /* Write data bytes */ - outb (page, EWRK3_TQ); /* Start sending pkt */ - } - } - - ENABLE_IRQs; - spin_unlock_irq (&lp->hw_lock); - - dev->stats.tx_bytes += skb->len; - dev_kfree_skb (skb); - - /* Check for free resources: stop Tx queue if there are none */ - if (inb (EWRK3_FMQC) == 0) - netif_stop_queue (dev); - - return NETDEV_TX_OK; - -err_out: - ENABLE_IRQs; - spin_unlock_irq (&lp->hw_lock); - return NETDEV_TX_BUSY; -} - -/* - ** The EWRK3 interrupt handler. - */ -static irqreturn_t ewrk3_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct ewrk3_private *lp; - u_long iobase; - u_char icr, cr, csr; - - lp = netdev_priv(dev); - iobase = dev->base_addr; - - /* get the interrupt information */ - csr = inb(EWRK3_CSR); - - /* - ** Mask the EWRK3 board interrupts and turn on the LED - */ - spin_lock(&lp->hw_lock); - DISABLE_IRQs; - - cr = inb(EWRK3_CR); - cr |= lp->led_mask; - outb(cr, EWRK3_CR); - - if (csr & CSR_RNE) /* Rx interrupt (packet[s] arrived) */ - ewrk3_rx(dev); - - if (csr & CSR_TNE) /* Tx interrupt (packet sent) */ - ewrk3_tx(dev); - - /* - ** Now deal with the TX/RX disable flags. These are set when there - ** are no more resources. If resources free up then enable these - ** interrupts, otherwise mask them - failure to do this will result - ** in the system hanging in an interrupt loop. - */ - if (inb(EWRK3_FMQC)) { /* any resources available? */ - lp->irq_mask |= ICR_TXDM | ICR_RXDM; /* enable the interrupt source */ - csr &= ~(CSR_TXD | CSR_RXD); /* ensure restart of a stalled TX or RX */ - outb(csr, EWRK3_CSR); - netif_wake_queue(dev); - } else { - lp->irq_mask &= ~(ICR_TXDM | ICR_RXDM); /* disable the interrupt source */ - } - - /* Unmask the EWRK3 board interrupts and turn off the LED */ - cr &= ~(lp->led_mask); - outb(cr, EWRK3_CR); - ENABLE_IRQs; - spin_unlock(&lp->hw_lock); - return IRQ_HANDLED; -} - -/* Called with lp->hw_lock held */ -static int ewrk3_rx(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - int i, status = 0; - u_char page; - void __iomem *buf = NULL; - - while (inb(EWRK3_RQC) && !status) { /* Whilst there's incoming data */ - if ((page = inb(EWRK3_RQ)) < lp->mPage) { /* Get next entry's buffer page */ - /* - ** Set up shared memory window and pointer into the window - */ - if (lp->shmem_length == IO_ONLY) { - outb(page, EWRK3_IOPR); - } else if (lp->shmem_length == SHMEM_2K) { - buf = lp->shmem; - outb(page, EWRK3_MPR); - } else if (lp->shmem_length == SHMEM_32K) { - buf = (((short) page << 11) & 0x7800) + lp->shmem; - outb((page >> 4), EWRK3_MPR); - } else if (lp->shmem_length == SHMEM_64K) { - buf = (((short) page << 11) & 0xf800) + lp->shmem; - outb((page >> 5), EWRK3_MPR); - } else { - status = -1; - printk("%s: Oops - your private data area is hosed!\n", dev->name); - } - - if (!status) { - char rx_status; - int pkt_len; - - if (lp->shmem_length == IO_ONLY) { - rx_status = inb(EWRK3_DATA); - pkt_len = inb(EWRK3_DATA); - pkt_len |= ((u_short) inb(EWRK3_DATA) << 8); - } else { - rx_status = readb(buf); - buf += 1; - pkt_len = readw(buf); - buf += 3; - } - - if (!(rx_status & R_ROK)) { /* There was an error. */ - dev->stats.rx_errors++; /* Update the error stats. */ - if (rx_status & R_DBE) - dev->stats.rx_frame_errors++; - if (rx_status & R_CRC) - dev->stats.rx_crc_errors++; - if (rx_status & R_PLL) - dev->stats.rx_fifo_errors++; - } else { - struct sk_buff *skb; - skb = netdev_alloc_skb(dev, - pkt_len + 2); - - if (skb != NULL) { - unsigned char *p; - skb_reserve(skb, 2); /* Align to 16 bytes */ - p = skb_put(skb, pkt_len); - - if (lp->shmem_length == IO_ONLY) { - *p = inb(EWRK3_DATA); /* dummy read */ - for (i = 0; i < pkt_len; i++) { - *p++ = inb(EWRK3_DATA); - } - } else { - memcpy_fromio(p, buf, pkt_len); - } - - for (i = 1; i < EWRK3_PKT_STAT_SZ - 1; i++) { - if (pkt_len < i * EWRK3_PKT_BIN_SZ) { - lp->pktStats.bins[i]++; - i = EWRK3_PKT_STAT_SZ; - } - } - p = skb->data; /* Look at the dest addr */ - if (is_multicast_ether_addr(p)) { - if (is_broadcast_ether_addr(p)) { - lp->pktStats.broadcast++; - } else { - lp->pktStats.multicast++; - } - } else if (ether_addr_equal(p, - dev->dev_addr)) { - lp->pktStats.unicast++; - } - lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */ - if (lp->pktStats.bins[0] == 0) { /* Reset counters */ - memset(&lp->pktStats, 0, sizeof(lp->pktStats)); - } - /* - ** Notify the upper protocol layers that there is another - ** packet to handle - */ - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - - /* - ** Update stats - */ - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } else { - printk("%s: Insufficient memory; nuking packet.\n", dev->name); - dev->stats.rx_dropped++; /* Really, deferred. */ - break; - } - } - } - /* - ** Return the received buffer to the free memory queue - */ - outb(page, EWRK3_FMQ); - } else { - printk("ewrk3_rx(): Illegal page number, page %d\n", page); - printk("ewrk3_rx(): CSR: %02x ICR: %02x FMQC: %02x\n", inb(EWRK3_CSR), inb(EWRK3_ICR), inb(EWRK3_FMQC)); - } - } - return status; -} - -/* -** Buffer sent - check for TX buffer errors. -** Called with lp->hw_lock held -*/ -static int ewrk3_tx(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - u_char tx_status; - - while ((tx_status = inb(EWRK3_TDQ)) > 0) { /* Whilst there's old buffers */ - if (tx_status & T_VSTS) { /* The status is valid */ - if (tx_status & T_TXE) { - dev->stats.tx_errors++; - if (tx_status & T_NCL) - dev->stats.tx_carrier_errors++; - if (tx_status & T_LCL) - dev->stats.tx_window_errors++; - if (tx_status & T_CTU) { - if ((tx_status & T_COLL) ^ T_XUR) { - lp->pktStats.tx_underruns++; - } else { - lp->pktStats.excessive_underruns++; - } - } else if (tx_status & T_COLL) { - if ((tx_status & T_COLL) ^ T_XCOLL) { - dev->stats.collisions++; - } else { - lp->pktStats.excessive_collisions++; - } - } - } else { - dev->stats.tx_packets++; - } - } - } - - return 0; -} - -static int ewrk3_close(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - u_char icr, csr; - - netif_stop_queue(dev); - - if (ewrk3_debug > 1) { - printk("%s: Shutting down ethercard, status was %2.2x.\n", - dev->name, inb(EWRK3_CSR)); - } - /* - ** We stop the EWRK3 here... mask interrupts and stop TX & RX - */ - DISABLE_IRQs; - - STOP_EWRK3; - - /* - ** Clean out the TX and RX queues here (note that one entry - ** may get added to either the TXD or RX queues if the TX or RX - ** just starts processing a packet before the STOP_EWRK3 command - ** is received. This will be flushed in the ewrk3_open() call). - */ - while (inb(EWRK3_TQ)); - while (inb(EWRK3_TDQ)); - while (inb(EWRK3_RQ)); - - if (!lp->hard_strapped) { - free_irq(dev->irq, dev); - } - return 0; -} - -/* - ** Set or clear the multicast filter for this adapter. - */ -static void set_multicast_list(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - u_long iobase = dev->base_addr; - u_char csr; - - csr = inb(EWRK3_CSR); - - if (lp->shmem_length == IO_ONLY) { - lp->mctbl = NULL; - } else { - lp->mctbl = lp->shmem + PAGE0_HTE; - } - - csr &= ~(CSR_PME | CSR_MCE); - if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ - csr |= CSR_PME; - outb(csr, EWRK3_CSR); - } else { - SetMulticastFilter(dev); - csr |= CSR_MCE; - outb(csr, EWRK3_CSR); - } -} - -/* - ** Calculate the hash code and update the logical address filter - ** from a list of ethernet multicast addresses. - ** Little endian crc one liner from Matt Thomas, DEC. - ** - ** Note that when clearing the table, the broadcast bit must remain asserted - ** to receive broadcast messages. - */ -static void SetMulticastFilter(struct net_device *dev) -{ - struct ewrk3_private *lp = netdev_priv(dev); - struct netdev_hw_addr *ha; - u_long iobase = dev->base_addr; - int i; - char bit, byte; - short __iomem *p = lp->mctbl; - u16 hashcode; - u32 crc; - - spin_lock_irq(&lp->hw_lock); - - if (lp->shmem_length == IO_ONLY) { - outb(0, EWRK3_IOPR); - outw(PAGE0_HTE, EWRK3_PIR1); - } else { - outb(0, EWRK3_MPR); - } - - if (dev->flags & IFF_ALLMULTI) { - for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) { - if (lp->shmem_length == IO_ONLY) { - outb(0xff, EWRK3_DATA); - } else { /* memset didn't work here */ - writew(0xffff, p); - p++; - i++; - } - } - } else { - /* Clear table except for broadcast bit */ - if (lp->shmem_length == IO_ONLY) { - for (i = 0; i < (HASH_TABLE_LEN >> 4) - 1; i++) { - outb(0x00, EWRK3_DATA); - } - outb(0x80, EWRK3_DATA); - i++; /* insert the broadcast bit */ - for (; i < (HASH_TABLE_LEN >> 3); i++) { - outb(0x00, EWRK3_DATA); - } - } else { - memset_io(lp->mctbl, 0, HASH_TABLE_LEN >> 3); - writeb(0x80, lp->mctbl + (HASH_TABLE_LEN >> 4) - 1); - } - - /* Update table */ - netdev_for_each_mc_addr(ha, dev) { - crc = ether_crc_le(ETH_ALEN, ha->addr); - hashcode = crc & ((1 << 9) - 1); /* hashcode is 9 LSb of CRC */ - - byte = hashcode >> 3; /* bit[3-8] -> byte in filter */ - bit = 1 << (hashcode & 0x07); /* bit[0-2] -> bit in byte */ - - if (lp->shmem_length == IO_ONLY) { - u_char tmp; - - outw(PAGE0_HTE + byte, EWRK3_PIR1); - tmp = inb(EWRK3_DATA); - tmp |= bit; - outw(PAGE0_HTE + byte, EWRK3_PIR1); - outb(tmp, EWRK3_DATA); - } else { - writeb(readb(lp->mctbl + byte) | bit, lp->mctbl + byte); - } - } - } - - spin_unlock_irq(&lp->hw_lock); -} - -/* - ** ISA bus I/O device probe - */ -static int __init isa_probe(struct net_device *dev, u_long ioaddr) -{ - int i = num_ewrks3s, maxSlots; - int ret = -ENODEV; - - u_long iobase; - - if (ioaddr >= 0x400) - goto out; - - if (ioaddr == 0) { /* Autoprobing */ - iobase = EWRK3_IO_BASE; /* Get the first slot address */ - maxSlots = 24; - } else { /* Probe a specific location */ - iobase = ioaddr; - maxSlots = i + 1; - } - - for (; (i < maxSlots) && (dev != NULL); - iobase += EWRK3_IOP_INC, i++) - { - if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME)) { - if (DevicePresent(iobase) == 0) { - int irq = dev->irq; - ret = ewrk3_hw_init(dev, iobase); - if (!ret) - break; - dev->irq = irq; - } - release_region(iobase, EWRK3_TOTAL_SIZE); - } - } - out: - - return ret; -} - -/* - ** EISA bus I/O device probe. Probe from slot 1 since slot 0 is usually - ** the motherboard. - */ -static int __init eisa_probe(struct net_device *dev, u_long ioaddr) -{ - int i, maxSlots; - u_long iobase; - int ret = -ENODEV; - - if (ioaddr < 0x1000) - goto out; - - iobase = ioaddr; - i = (ioaddr >> 12); - maxSlots = i + 1; - - for (i = 1; (i < maxSlots) && (dev != NULL); i++, iobase += EISA_SLOT_INC) { - if (EISA_signature(name, EISA_ID) == 0) { - if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME) && - DevicePresent(iobase) == 0) { - int irq = dev->irq; - ret = ewrk3_hw_init(dev, iobase); - if (!ret) - break; - dev->irq = irq; - } - release_region(iobase, EWRK3_TOTAL_SIZE); - } - } - - out: - return ret; -} - - -/* - ** Read the EWRK3 EEPROM using this routine - */ -static int Read_EEPROM(u_long iobase, u_char eaddr) -{ - int i; - - outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */ - outb(EEPROM_RD, EWRK3_IOPR); /* issue read command */ - for (i = 0; i < 5000; i++) - inb(EWRK3_CSR); /* wait 1msec */ - - return inw(EWRK3_EPROM1); /* 16 bits data return */ -} - -/* - ** Write the EWRK3 EEPROM using this routine - */ -static int Write_EEPROM(short data, u_long iobase, u_char eaddr) -{ - int i; - - outb(EEPROM_WR_EN, EWRK3_IOPR); /* issue write enable command */ - for (i = 0; i < 5000; i++) - inb(EWRK3_CSR); /* wait 1msec */ - outw(data, EWRK3_EPROM1); /* write data to register */ - outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */ - outb(EEPROM_WR, EWRK3_IOPR); /* issue write command */ - for (i = 0; i < 75000; i++) - inb(EWRK3_CSR); /* wait 15msec */ - outb(EEPROM_WR_DIS, EWRK3_IOPR); /* issue write disable command */ - for (i = 0; i < 5000; i++) - inb(EWRK3_CSR); /* wait 1msec */ - - return 0; -} - -/* - ** Look for a particular board name in the on-board EEPROM. - */ -static void __init EthwrkSignature(char *name, char *eeprom_image) -{ - int i; - char *signatures[] = EWRK3_SIGNATURE; - - for (i=0; *signatures[i] != '\0'; i++) - if( !strncmp(eeprom_image+EEPROM_PNAME7, signatures[i], strlen(signatures[i])) ) - break; - - if (*signatures[i] != '\0') { - memcpy(name, eeprom_image+EEPROM_PNAME7, EWRK3_STRLEN); - name[EWRK3_STRLEN] = '\0'; - } else - name[0] = '\0'; -} - -/* - ** Look for a special sequence in the Ethernet station address PROM that - ** is common across all EWRK3 products. - ** - ** Search the Ethernet address ROM for the signature. Since the ROM address - ** counter can start at an arbitrary point, the search must include the entire - ** probe sequence length plus the (length_of_the_signature - 1). - ** Stop the search IMMEDIATELY after the signature is found so that the - ** PROM address counter is correctly positioned at the start of the - ** ethernet address for later read out. - */ - -static int __init DevicePresent(u_long iobase) -{ - union { - struct { - u32 a; - u32 b; - } llsig; - char Sig[sizeof(u32) << 1]; - } - dev; - short sigLength; - char data; - int i, j, status = 0; - - dev.llsig.a = ETH_PROM_SIG; - dev.llsig.b = ETH_PROM_SIG; - sigLength = sizeof(u32) << 1; - - for (i = 0, j = 0; j < sigLength && i < PROBE_LENGTH + sigLength - 1; i++) { - data = inb(EWRK3_APROM); - if (dev.Sig[j] == data) { /* track signature */ - j++; - } else { /* lost signature; begin search again */ - if (data == dev.Sig[0]) { - j = 1; - } else { - j = 0; - } - } - } - - if (j != sigLength) { - status = -ENODEV; /* search failed */ - } - return status; -} - -static u_char __init get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType) -{ - int i, j, k; - u_short chksum; - u_char crc, lfsr, sd, status = 0; - u_long iobase = dev->base_addr; - u16 tmp; - - if (chipType == LeMAC2) { - for (crc = 0x6a, j = 0; j < ETH_ALEN; j++) { - sd = dev->dev_addr[j] = eeprom_image[EEPROM_PADDR0 + j]; - outb(dev->dev_addr[j], EWRK3_PAR0 + j); - for (k = 0; k < 8; k++, sd >>= 1) { - lfsr = ((((crc & 0x02) >> 1) ^ (crc & 0x01)) ^ (sd & 0x01)) << 7; - crc = (crc >> 1) + lfsr; - } - } - if (crc != eeprom_image[EEPROM_PA_CRC]) - status = -1; - } else { - for (i = 0, k = 0; i < ETH_ALEN;) { - k <<= 1; - if (k > 0xffff) - k -= 0xffff; - - k += (u_char) (tmp = inb(EWRK3_APROM)); - dev->dev_addr[i] = (u_char) tmp; - outb(dev->dev_addr[i], EWRK3_PAR0 + i); - i++; - k += (u_short) ((tmp = inb(EWRK3_APROM)) << 8); - dev->dev_addr[i] = (u_char) tmp; - outb(dev->dev_addr[i], EWRK3_PAR0 + i); - i++; - - if (k > 0xffff) - k -= 0xffff; - } - if (k == 0xffff) - k = 0; - chksum = inb(EWRK3_APROM); - chksum |= (inb(EWRK3_APROM) << 8); - if (k != chksum) - status = -1; - } - - return status; -} - -/* - ** Look for a particular board name in the EISA configuration space - */ -static int __init EISA_signature(char *name, s32 eisa_id) -{ - u_long i; - char *signatures[] = EWRK3_SIGNATURE; - char ManCode[EWRK3_STRLEN]; - union { - s32 ID; - char Id[4]; - } Eisa; - int status = 0; - - *name = '\0'; - for (i = 0; i < 4; i++) { - Eisa.Id[i] = inb(eisa_id + i); - } - - ManCode[0] = (((Eisa.Id[0] >> 2) & 0x1f) + 0x40); - ManCode[1] = (((Eisa.Id[1] & 0xe0) >> 5) + ((Eisa.Id[0] & 0x03) << 3) + 0x40); - ManCode[2] = (((Eisa.Id[2] >> 4) & 0x0f) + 0x30); - ManCode[3] = ((Eisa.Id[2] & 0x0f) + 0x30); - ManCode[4] = (((Eisa.Id[3] >> 4) & 0x0f) + 0x30); - ManCode[5] = '\0'; - - for (i = 0; (*signatures[i] != '\0') && (*name == '\0'); i++) { - if (strstr(ManCode, signatures[i]) != NULL) { - strcpy(name, ManCode); - status = 1; - } - } - - return status; /* return the device name string */ -} - -static void ewrk3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - int fwrev = Read_EEPROM(dev->base_addr, EEPROM_REVLVL); - - strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); - strlcpy(info->version, DRV_VERSION, sizeof(info->version)); - snprintf(info->fw_version, sizeof(info->fw_version), "%d", fwrev); - strlcpy(info->bus_info, "N/A", sizeof(info->bus_info)); - info->eedump_len = EEPROM_MAX; -} - -static int ewrk3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct ewrk3_private *lp = netdev_priv(dev); - unsigned long iobase = dev->base_addr; - u8 cr = inb(EWRK3_CR); - - switch (lp->adapter_name[4]) { - case '3': /* DE203 */ - ecmd->supported = SUPPORTED_BNC; - ecmd->port = PORT_BNC; - break; - - case '4': /* DE204 */ - ecmd->supported = SUPPORTED_TP; - ecmd->port = PORT_TP; - break; - - case '5': /* DE205 */ - ecmd->supported = SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_AUI; - ecmd->autoneg = !(cr & CR_APD); - /* - ** Port is only valid if autoneg is disabled - ** and even then we don't know if AUI is jumpered. - */ - if (!ecmd->autoneg) - ecmd->port = (cr & CR_PSEL) ? PORT_BNC : PORT_TP; - break; - } - - ecmd->supported |= SUPPORTED_10baseT_Half; - ethtool_cmd_speed_set(ecmd, SPEED_10); - ecmd->duplex = DUPLEX_HALF; - return 0; -} - -static int ewrk3_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct ewrk3_private *lp = netdev_priv(dev); - unsigned long iobase = dev->base_addr; - unsigned long flags; - u8 cr; - - /* DE205 is the only card with anything to set */ - if (lp->adapter_name[4] != '5') - return -EOPNOTSUPP; - - /* Sanity-check parameters */ - if (ecmd->speed != SPEED_10) - return -EINVAL; - if (ecmd->port != PORT_TP && ecmd->port != PORT_BNC) - return -EINVAL; /* AUI is not software-selectable */ - if (ecmd->transceiver != XCVR_INTERNAL) - return -EINVAL; - if (ecmd->duplex != DUPLEX_HALF) - return -EINVAL; - if (ecmd->phy_address != 0) - return -EINVAL; - - spin_lock_irqsave(&lp->hw_lock, flags); - cr = inb(EWRK3_CR); - - /* If Autoneg is set, change to Auto Port mode */ - /* Otherwise, disable Auto Port and set port explicitly */ - if (ecmd->autoneg) { - cr &= ~CR_APD; - } else { - cr |= CR_APD; - if (ecmd->port == PORT_TP) - cr &= ~CR_PSEL; /* Force TP */ - else - cr |= CR_PSEL; /* Force BNC */ - } - - /* Commit the changes */ - outb(cr, EWRK3_CR); - spin_unlock_irqrestore(&lp->hw_lock, flags); - return 0; -} - -static u32 ewrk3_get_link(struct net_device *dev) -{ - unsigned long iobase = dev->base_addr; - u8 cmr = inb(EWRK3_CMR); - /* DE203 has BNC only and link status does not apply */ - /* On DE204 this is always valid since TP is the only port. */ - /* On DE205 this reflects TP status even if BNC or AUI is selected. */ - return !(cmr & CMR_LINK); -} - -static int ewrk3_set_phys_id(struct net_device *dev, - enum ethtool_phys_id_state state) -{ - struct ewrk3_private *lp = netdev_priv(dev); - unsigned long iobase = dev->base_addr; - u8 cr; - - spin_lock_irq(&lp->hw_lock); - - switch (state) { - case ETHTOOL_ID_ACTIVE: - /* Prevent ISR from twiddling the LED */ - lp->led_mask = 0; - spin_unlock_irq(&lp->hw_lock); - return 2; /* cycle on/off twice per second */ - - case ETHTOOL_ID_ON: - cr = inb(EWRK3_CR); - outb(cr | CR_LED, EWRK3_CR); - break; - - case ETHTOOL_ID_OFF: - cr = inb(EWRK3_CR); - outb(cr & ~CR_LED, EWRK3_CR); - break; - - case ETHTOOL_ID_INACTIVE: - lp->led_mask = CR_LED; - cr = inb(EWRK3_CR); - outb(cr & ~CR_LED, EWRK3_CR); - } - spin_unlock_irq(&lp->hw_lock); - - return 0; -} - -static const struct ethtool_ops ethtool_ops_203 = { - .get_drvinfo = ewrk3_get_drvinfo, - .get_settings = ewrk3_get_settings, - .set_settings = ewrk3_set_settings, - .set_phys_id = ewrk3_set_phys_id, -}; - -static const struct ethtool_ops ethtool_ops = { - .get_drvinfo = ewrk3_get_drvinfo, - .get_settings = ewrk3_get_settings, - .set_settings = ewrk3_set_settings, - .get_link = ewrk3_get_link, - .set_phys_id = ewrk3_set_phys_id, -}; - -/* - ** Perform IOCTL call functions here. Some are privileged operations and the - ** effective uid is checked in those cases. - */ -static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct ewrk3_private *lp = netdev_priv(dev); - struct ewrk3_ioctl *ioc = (struct ewrk3_ioctl *) &rq->ifr_ifru; - u_long iobase = dev->base_addr; - int i, j, status = 0; - u_char csr; - unsigned long flags; - union ewrk3_addr { - u_char addr[HASH_TABLE_LEN * ETH_ALEN]; - u_short val[(HASH_TABLE_LEN * ETH_ALEN) >> 1]; - }; - - union ewrk3_addr *tmp; - - /* All we handle are private IOCTLs */ - if (cmd != EWRK3IOCTL) - return -EOPNOTSUPP; - - tmp = kmalloc(sizeof(union ewrk3_addr), GFP_KERNEL); - if(tmp==NULL) - return -ENOMEM; - - switch (ioc->cmd) { - case EWRK3_GET_HWADDR: /* Get the hardware address */ - for (i = 0; i < ETH_ALEN; i++) { - tmp->addr[i] = dev->dev_addr[i]; - } - ioc->len = ETH_ALEN; - if (copy_to_user(ioc->data, tmp->addr, ioc->len)) - status = -EFAULT; - break; - - case EWRK3_SET_HWADDR: /* Set the hardware address */ - if (capable(CAP_NET_ADMIN)) { - spin_lock_irqsave(&lp->hw_lock, flags); - csr = inb(EWRK3_CSR); - csr |= (CSR_TXD | CSR_RXD); - outb(csr, EWRK3_CSR); /* Disable the TX and RX */ - spin_unlock_irqrestore(&lp->hw_lock, flags); - - if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN)) { - status = -EFAULT; - break; - } - spin_lock_irqsave(&lp->hw_lock, flags); - for (i = 0; i < ETH_ALEN; i++) { - dev->dev_addr[i] = tmp->addr[i]; - outb(tmp->addr[i], EWRK3_PAR0 + i); - } - - csr = inb(EWRK3_CSR); - csr &= ~(CSR_TXD | CSR_RXD); /* Enable the TX and RX */ - outb(csr, EWRK3_CSR); - spin_unlock_irqrestore(&lp->hw_lock, flags); - } else { - status = -EPERM; - } - - break; - case EWRK3_SET_PROM: /* Set Promiscuous Mode */ - if (capable(CAP_NET_ADMIN)) { - spin_lock_irqsave(&lp->hw_lock, flags); - csr = inb(EWRK3_CSR); - csr |= CSR_PME; - csr &= ~CSR_MCE; - outb(csr, EWRK3_CSR); - spin_unlock_irqrestore(&lp->hw_lock, flags); - } else { - status = -EPERM; - } - - break; - case EWRK3_CLR_PROM: /* Clear Promiscuous Mode */ - if (capable(CAP_NET_ADMIN)) { - spin_lock_irqsave(&lp->hw_lock, flags); - csr = inb(EWRK3_CSR); - csr &= ~CSR_PME; - outb(csr, EWRK3_CSR); - spin_unlock_irqrestore(&lp->hw_lock, flags); - } else { - status = -EPERM; - } - - break; - case EWRK3_GET_MCA: /* Get the multicast address table */ - spin_lock_irqsave(&lp->hw_lock, flags); - if (lp->shmem_length == IO_ONLY) { - outb(0, EWRK3_IOPR); - outw(PAGE0_HTE, EWRK3_PIR1); - for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) { - tmp->addr[i] = inb(EWRK3_DATA); - } - } else { - outb(0, EWRK3_MPR); - memcpy_fromio(tmp->addr, lp->shmem + PAGE0_HTE, (HASH_TABLE_LEN >> 3)); - } - spin_unlock_irqrestore(&lp->hw_lock, flags); - - ioc->len = (HASH_TABLE_LEN >> 3); - if (copy_to_user(ioc->data, tmp->addr, ioc->len)) - status = -EFAULT; - - break; - case EWRK3_SET_MCA: /* Set a multicast address */ - if (capable(CAP_NET_ADMIN)) { - if (ioc->len > HASH_TABLE_LEN) { - status = -EINVAL; - break; - } - if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN * ioc->len)) { - status = -EFAULT; - break; - } - set_multicast_list(dev); - } else { - status = -EPERM; - } - - break; - case EWRK3_CLR_MCA: /* Clear all multicast addresses */ - if (capable(CAP_NET_ADMIN)) { - set_multicast_list(dev); - } else { - status = -EPERM; - } - - break; - case EWRK3_MCA_EN: /* Enable multicast addressing */ - if (capable(CAP_NET_ADMIN)) { - spin_lock_irqsave(&lp->hw_lock, flags); - csr = inb(EWRK3_CSR); - csr |= CSR_MCE; - csr &= ~CSR_PME; - outb(csr, EWRK3_CSR); - spin_unlock_irqrestore(&lp->hw_lock, flags); - } else { - status = -EPERM; - } - - break; - case EWRK3_GET_STATS: { /* Get the driver statistics */ - struct ewrk3_stats *tmp_stats = - kmalloc(sizeof(lp->pktStats), GFP_KERNEL); - if (!tmp_stats) { - status = -ENOMEM; - break; - } - - spin_lock_irqsave(&lp->hw_lock, flags); - memcpy(tmp_stats, &lp->pktStats, sizeof(lp->pktStats)); - spin_unlock_irqrestore(&lp->hw_lock, flags); - - ioc->len = sizeof(lp->pktStats); - if (copy_to_user(ioc->data, tmp_stats, sizeof(lp->pktStats))) - status = -EFAULT; - kfree(tmp_stats); - break; - } - case EWRK3_CLR_STATS: /* Zero out the driver statistics */ - if (capable(CAP_NET_ADMIN)) { - spin_lock_irqsave(&lp->hw_lock, flags); - memset(&lp->pktStats, 0, sizeof(lp->pktStats)); - spin_unlock_irqrestore(&lp->hw_lock,flags); - } else { - status = -EPERM; - } - - break; - case EWRK3_GET_CSR: /* Get the CSR Register contents */ - tmp->addr[0] = inb(EWRK3_CSR); - ioc->len = 1; - if (copy_to_user(ioc->data, tmp->addr, ioc->len)) - status = -EFAULT; - break; - case EWRK3_SET_CSR: /* Set the CSR Register contents */ - if (capable(CAP_NET_ADMIN)) { - if (copy_from_user(tmp->addr, ioc->data, 1)) { - status = -EFAULT; - break; - } - outb(tmp->addr[0], EWRK3_CSR); - } else { - status = -EPERM; - } - - break; - case EWRK3_GET_EEPROM: /* Get the EEPROM contents */ - if (capable(CAP_NET_ADMIN)) { - for (i = 0; i < (EEPROM_MAX >> 1); i++) { - tmp->val[i] = (short) Read_EEPROM(iobase, i); - } - i = EEPROM_MAX; - tmp->addr[i++] = inb(EWRK3_CMR); /* Config/Management Reg. */ - for (j = 0; j < ETH_ALEN; j++) { - tmp->addr[i++] = inb(EWRK3_PAR0 + j); - } - ioc->len = EEPROM_MAX + 1 + ETH_ALEN; - if (copy_to_user(ioc->data, tmp->addr, ioc->len)) - status = -EFAULT; - } else { - status = -EPERM; - } - - break; - case EWRK3_SET_EEPROM: /* Set the EEPROM contents */ - if (capable(CAP_NET_ADMIN)) { - if (copy_from_user(tmp->addr, ioc->data, EEPROM_MAX)) { - status = -EFAULT; - break; - } - for (i = 0; i < (EEPROM_MAX >> 1); i++) { - Write_EEPROM(tmp->val[i], iobase, i); - } - } else { - status = -EPERM; - } - - break; - case EWRK3_GET_CMR: /* Get the CMR Register contents */ - tmp->addr[0] = inb(EWRK3_CMR); - ioc->len = 1; - if (copy_to_user(ioc->data, tmp->addr, ioc->len)) - status = -EFAULT; - break; - case EWRK3_SET_TX_CUT_THRU: /* Set TX cut through mode */ - if (capable(CAP_NET_ADMIN)) { - lp->txc = 1; - } else { - status = -EPERM; - } - - break; - case EWRK3_CLR_TX_CUT_THRU: /* Clear TX cut through mode */ - if (capable(CAP_NET_ADMIN)) { - lp->txc = 0; - } else { - status = -EPERM; - } - - break; - default: - status = -EOPNOTSUPP; - } - kfree(tmp); - return status; -} - -#ifdef MODULE -static struct net_device *ewrk3_devs[MAX_NUM_EWRK3S]; -static int ndevs; -static int io[MAX_NUM_EWRK3S+1] = { 0x300, 0, }; - -module_param_array(io, int, NULL, 0); -module_param_array(irq, byte, NULL, 0); -MODULE_PARM_DESC(io, "EtherWORKS 3 I/O base address(es)"); -MODULE_PARM_DESC(irq, "EtherWORKS 3 IRQ number(s)"); - -static __exit void ewrk3_exit_module(void) -{ - int i; - - for( i=0; i<ndevs; i++ ) { - struct net_device *dev = ewrk3_devs[i]; - struct ewrk3_private *lp = netdev_priv(dev); - ewrk3_devs[i] = NULL; - unregister_netdev(dev); - release_region(dev->base_addr, EWRK3_TOTAL_SIZE); - iounmap(lp->shmem); - free_netdev(dev); - } -} - -static __init int ewrk3_init_module(void) -{ - int i=0; - - while( io[i] && irq[i] ) { - struct net_device *dev - = alloc_etherdev(sizeof(struct ewrk3_private)); - - if (!dev) - break; - - if (ewrk3_probe1(dev, io[i], irq[i]) != 0) { - free_netdev(dev); - break; - } - - ewrk3_devs[ndevs++] = dev; - i++; - } - - return ndevs ? 0 : -EIO; -} - - -/* Hack for breakage in new module stuff */ -module_exit(ewrk3_exit_module); -module_init(ewrk3_init_module); -#endif /* MODULE */ -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/dec/ewrk3.h b/drivers/net/ethernet/dec/ewrk3.h deleted file mode 100644 index 8e0ee90..0000000 --- a/drivers/net/ethernet/dec/ewrk3.h +++ /dev/null @@ -1,322 +0,0 @@ -/* - Written 1994 by David C. Davies. - - Copyright 1994 Digital Equipment Corporation. - - This software may be used and distributed according to the terms of the - GNU General Public License, incorporated herein by reference. - - The author may be reached as davies@wanton.lkg.dec.com or Digital - Equipment Corporation, 550 King Street, Littleton MA 01460. - - ========================================================================= -*/ - -/* -** I/O Address Register Map -*/ -#define EWRK3_CSR iobase+0x00 /* Control and Status Register */ -#define EWRK3_CR iobase+0x01 /* Control Register */ -#define EWRK3_ICR iobase+0x02 /* Interrupt Control Register */ -#define EWRK3_TSR iobase+0x03 /* Transmit Status Register */ -#define EWRK3_RSVD1 iobase+0x04 /* RESERVED */ -#define EWRK3_RSVD2 iobase+0x05 /* RESERVED */ -#define EWRK3_FMQ iobase+0x06 /* Free Memory Queue */ -#define EWRK3_FMQC iobase+0x07 /* Free Memory Queue Counter */ -#define EWRK3_RQ iobase+0x08 /* Receive Queue */ -#define EWRK3_RQC iobase+0x09 /* Receive Queue Counter */ -#define EWRK3_TQ iobase+0x0a /* Transmit Queue */ -#define EWRK3_TQC iobase+0x0b /* Transmit Queue Counter */ -#define EWRK3_TDQ iobase+0x0c /* Transmit Done Queue */ -#define EWRK3_TDQC iobase+0x0d /* Transmit Done Queue Counter */ -#define EWRK3_PIR1 iobase+0x0e /* Page Index Register 1 */ -#define EWRK3_PIR2 iobase+0x0f /* Page Index Register 2 */ -#define EWRK3_DATA iobase+0x10 /* Data Register */ -#define EWRK3_IOPR iobase+0x11 /* I/O Page Register */ -#define EWRK3_IOBR iobase+0x12 /* I/O Base Register */ -#define EWRK3_MPR iobase+0x13 /* Memory Page Register */ -#define EWRK3_MBR iobase+0x14 /* Memory Base Register */ -#define EWRK3_APROM iobase+0x15 /* Address PROM */ -#define EWRK3_EPROM1 iobase+0x16 /* EEPROM Data Register 1 */ -#define EWRK3_EPROM2 iobase+0x17 /* EEPROM Data Register 2 */ -#define EWRK3_PAR0 iobase+0x18 /* Physical Address Register 0 */ -#define EWRK3_PAR1 iobase+0x19 /* Physical Address Register 1 */ -#define EWRK3_PAR2 iobase+0x1a /* Physical Address Register 2 */ -#define EWRK3_PAR3 iobase+0x1b /* Physical Address Register 3 */ -#define EWRK3_PAR4 iobase+0x1c /* Physical Address Register 4 */ -#define EWRK3_PAR5 iobase+0x1d /* Physical Address Register 5 */ -#define EWRK3_CMR iobase+0x1e /* Configuration/Management Register */ - -/* -** Control Page Map -*/ -#define PAGE0_FMQ 0x000 /* Free Memory Queue */ -#define PAGE0_RQ 0x080 /* Receive Queue */ -#define PAGE0_TQ 0x100 /* Transmit Queue */ -#define PAGE0_TDQ 0x180 /* Transmit Done Queue */ -#define PAGE0_HTE 0x200 /* Hash Table Entries */ -#define PAGE0_RSVD 0x240 /* RESERVED */ -#define PAGE0_USRD 0x600 /* User Data */ - -/* -** Control and Status Register bit definitions (EWRK3_CSR) -*/ -#define CSR_RA 0x80 /* Runt Accept */ -#define CSR_PME 0x40 /* Promiscuous Mode Enable */ -#define CSR_MCE 0x20 /* Multicast Enable */ -#define CSR_TNE 0x08 /* TX Done Queue Not Empty */ -#define CSR_RNE 0x04 /* RX Queue Not Empty */ -#define CSR_TXD 0x02 /* TX Disable */ -#define CSR_RXD 0x01 /* RX Disable */ - -/* -** Control Register bit definitions (EWRK3_CR) -*/ -#define CR_APD 0x80 /* Auto Port Disable */ -#define CR_PSEL 0x40 /* Port Select (0->TP port) */ -#define CR_LBCK 0x20 /* LoopBaCK enable */ -#define CR_FDUP 0x10 /* Full DUPlex enable */ -#define CR_FBUS 0x08 /* Fast BUS enable (ISA clk > 8.33MHz) */ -#define CR_EN_16 0x04 /* ENable 16 bit memory accesses */ -#define CR_LED 0x02 /* LED (1-> turn on) */ - -/* -** Interrupt Control Register bit definitions (EWRK3_ICR) -*/ -#define ICR_IE 0x80 /* Interrupt Enable */ -#define ICR_IS 0x60 /* Interrupt Selected */ -#define ICR_TNEM 0x08 /* TNE Mask (0->mask) */ -#define ICR_RNEM 0x04 /* RNE Mask (0->mask) */ -#define ICR_TXDM 0x02 /* TXD Mask (0->mask) */ -#define ICR_RXDM 0x01 /* RXD Mask (0->mask) */ - -/* -** Transmit Status Register bit definitions (EWRK3_TSR) -*/ -#define TSR_NCL 0x80 /* No Carrier Loopback */ -#define TSR_ID 0x40 /* Initially Deferred */ -#define TSR_LCL 0x20 /* Late CoLlision */ -#define TSR_ECL 0x10 /* Excessive CoLlisions */ -#define TSR_RCNTR 0x0f /* Retries CouNTeR */ - -/* -** I/O Page Register bit definitions (EWRK3_IOPR) -*/ -#define EEPROM_INIT 0xc0 /* EEPROM INIT command */ -#define EEPROM_WR_EN 0xc8 /* EEPROM WRITE ENABLE command */ -#define EEPROM_WR 0xd0 /* EEPROM WRITE command */ -#define EEPROM_WR_DIS 0xd8 /* EEPROM WRITE DISABLE command */ -#define EEPROM_RD 0xe0 /* EEPROM READ command */ - -/* -** I/O Base Register bit definitions (EWRK3_IOBR) -*/ -#define EISA_REGS_EN 0x20 /* Enable EISA ID and Control Registers */ -#define EISA_IOB 0x1f /* Compare bits for I/O Base Address */ - -/* -** I/O Configuration/Management Register bit definitions (EWRK3_CMR) -*/ -#define CMR_RA 0x80 /* Read Ahead */ -#define CMR_WB 0x40 /* Write Behind */ -#define CMR_LINK 0x20 /* 0->TP */ -#define CMR_POLARITY 0x10 /* Informational */ -#define CMR_NO_EEPROM 0x0c /* NO_EEPROM<1:0> pin status */ -#define CMR_HS 0x08 /* Hard Strapped pin status (LeMAC2) */ -#define CMR_PNP 0x04 /* Plug 'n Play */ -#define CMR_DRAM 0x02 /* 0-> 1DRAM, 1-> 2 DRAM on board */ -#define CMR_0WS 0x01 /* Zero Wait State */ - -/* -** MAC Receive Status Register bit definitions -*/ - -#define R_ROK 0x80 /* Receive OK summary */ -#define R_IAM 0x10 /* Individual Address Match */ -#define R_MCM 0x08 /* MultiCast Match */ -#define R_DBE 0x04 /* Dribble Bit Error */ -#define R_CRC 0x02 /* CRC error */ -#define R_PLL 0x01 /* Phase Lock Lost */ - -/* -** MAC Transmit Control Register bit definitions -*/ - -#define TCR_SQEE 0x40 /* SQE Enable - look for heartbeat */ -#define TCR_SED 0x20 /* Stop when Error Detected */ -#define TCR_QMODE 0x10 /* Q_MODE */ -#define TCR_LAB 0x08 /* Less Aggressive Backoff */ -#define TCR_PAD 0x04 /* PAD Runt Packets */ -#define TCR_IFC 0x02 /* Insert Frame Check */ -#define TCR_ISA 0x01 /* Insert Source Address */ - -/* -** MAC Transmit Status Register bit definitions -*/ - -#define T_VSTS 0x80 /* Valid STatuS */ -#define T_CTU 0x40 /* Cut Through Used */ -#define T_SQE 0x20 /* Signal Quality Error */ -#define T_NCL 0x10 /* No Carrier Loopback */ -#define T_LCL 0x08 /* Late Collision */ -#define T_ID 0x04 /* Initially Deferred */ -#define T_COLL 0x03 /* COLLision status */ -#define T_XCOLL 0x03 /* Excessive Collisions */ -#define T_MCOLL 0x02 /* Multiple Collisions */ -#define T_OCOLL 0x01 /* One Collision */ -#define T_NOCOLL 0x00 /* No Collisions */ -#define T_XUR 0x03 /* Excessive Underruns */ -#define T_TXE 0x7f /* TX Errors */ - -/* -** EISA Configuration Register bit definitions -*/ - -#define EISA_ID iobase + 0x0c80 /* EISA ID Registers */ -#define EISA_ID0 iobase + 0x0c80 /* EISA ID Register 0 */ -#define EISA_ID1 iobase + 0x0c81 /* EISA ID Register 1 */ -#define EISA_ID2 iobase + 0x0c82 /* EISA ID Register 2 */ -#define EISA_ID3 iobase + 0x0c83 /* EISA ID Register 3 */ -#define EISA_CR iobase + 0x0c84 /* EISA Control Register */ - -/* -** EEPROM BYTES -*/ -#define EEPROM_MEMB 0x00 -#define EEPROM_IOB 0x01 -#define EEPROM_EISA_ID0 0x02 -#define EEPROM_EISA_ID1 0x03 -#define EEPROM_EISA_ID2 0x04 -#define EEPROM_EISA_ID3 0x05 -#define EEPROM_MISC0 0x06 -#define EEPROM_MISC1 0x07 -#define EEPROM_PNAME7 0x08 -#define EEPROM_PNAME6 0x09 -#define EEPROM_PNAME5 0x0a -#define EEPROM_PNAME4 0x0b -#define EEPROM_PNAME3 0x0c -#define EEPROM_PNAME2 0x0d -#define EEPROM_PNAME1 0x0e -#define EEPROM_PNAME0 0x0f -#define EEPROM_SWFLAGS 0x10 -#define EEPROM_HWCAT 0x11 -#define EEPROM_NETMAN2 0x12 -#define EEPROM_REVLVL 0x13 -#define EEPROM_NETMAN0 0x14 -#define EEPROM_NETMAN1 0x15 -#define EEPROM_CHIPVER 0x16 -#define EEPROM_SETUP 0x17 -#define EEPROM_PADDR0 0x18 -#define EEPROM_PADDR1 0x19 -#define EEPROM_PADDR2 0x1a -#define EEPROM_PADDR3 0x1b -#define EEPROM_PADDR4 0x1c -#define EEPROM_PADDR5 0x1d -#define EEPROM_PA_CRC 0x1e -#define EEPROM_CHKSUM 0x1f - -/* -** EEPROM bytes for checksumming -*/ -#define EEPROM_MAX 32 /* bytes */ - -/* -** EEPROM MISCELLANEOUS FLAGS -*/ -#define RBE_SHADOW 0x0100 /* Remote Boot Enable Shadow */ -#define READ_AHEAD 0x0080 /* Read Ahead feature */ -#define IRQ_SEL2 0x0070 /* IRQ line selection (LeMAC2) */ -#define IRQ_SEL 0x0060 /* IRQ line selection */ -#define FAST_BUS 0x0008 /* ISA Bus speeds > 8.33MHz */ -#define ENA_16 0x0004 /* Enables 16 bit memory transfers */ -#define WRITE_BEHIND 0x0002 /* Write Behind feature */ -#define _0WS_ENA 0x0001 /* Zero Wait State Enable */ - -/* -** EEPROM NETWORK MANAGEMENT FLAGS -*/ -#define NETMAN_POL 0x04 /* Polarity defeat */ -#define NETMAN_LINK 0x02 /* Link defeat */ -#define NETMAN_CCE 0x01 /* Custom Counters Enable */ - -/* -** EEPROM SW FLAGS -*/ -#define SW_SQE 0x10 /* Signal Quality Error */ -#define SW_LAB 0x08 /* Less Aggressive Backoff */ -#define SW_INIT 0x04 /* Initialized */ -#define SW_TIMEOUT 0x02 /* 0:2.5 mins, 1: 30 secs */ -#define SW_REMOTE 0x01 /* Remote Boot Enable -> 1 */ - -/* -** EEPROM SETUP FLAGS -*/ -#define SETUP_APD 0x80 /* AutoPort Disable */ -#define SETUP_PS 0x40 /* Port Select */ -#define SETUP_MP 0x20 /* MultiPort */ -#define SETUP_1TP 0x10 /* 1 port, TP */ -#define SETUP_1COAX 0x00 /* 1 port, Coax */ -#define SETUP_DRAM 0x02 /* Number of DRAMS on board */ - -/* -** EEPROM MANAGEMENT FLAGS -*/ -#define MGMT_CCE 0x01 /* Custom Counters Enable */ - -/* -** EEPROM VERSIONS -*/ -#define LeMAC 0x11 -#define LeMAC2 0x12 - -/* -** Miscellaneous -*/ - -#define EEPROM_WAIT_TIME 1000 /* Number of microseconds */ -#define EISA_EN 0x0001 /* Enable EISA bus buffers */ - -#define HASH_TABLE_LEN 512 /* Bits */ - -#define XCT 0x80 /* Transmit Cut Through */ -#define PRELOAD 16 /* 4 long words */ - -#define MASK_INTERRUPTS 1 -#define UNMASK_INTERRUPTS 0 - -#define EEPROM_OFFSET(a) ((u_short)((u_long)(a))) - -/* -** Include the IOCTL stuff -*/ -#include <linux/sockios.h> - -#define EWRK3IOCTL SIOCDEVPRIVATE - -struct ewrk3_ioctl { - unsigned short cmd; /* Command to run */ - unsigned short len; /* Length of the data buffer */ - unsigned char __user *data; /* Pointer to the data buffer */ -}; - -/* -** Recognised commands for the driver -*/ -#define EWRK3_GET_HWADDR 0x01 /* Get the hardware address */ -#define EWRK3_SET_HWADDR 0x02 /* Get the hardware address */ -#define EWRK3_SET_PROM 0x03 /* Set Promiscuous Mode */ -#define EWRK3_CLR_PROM 0x04 /* Clear Promiscuous Mode */ -#define EWRK3_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */ -#define EWRK3_GET_MCA 0x06 /* Get a multicast address */ -#define EWRK3_SET_MCA 0x07 /* Set a multicast address */ -#define EWRK3_CLR_MCA 0x08 /* Clear a multicast address */ -#define EWRK3_MCA_EN 0x09 /* Enable a multicast address group */ -#define EWRK3_GET_STATS 0x0a /* Get the driver statistics */ -#define EWRK3_CLR_STATS 0x0b /* Zero out the driver statistics */ -#define EWRK3_GET_CSR 0x0c /* Get the CSR Register contents */ -#define EWRK3_SET_CSR 0x0d /* Set the CSR Register contents */ -#define EWRK3_GET_EEPROM 0x0e /* Get the EEPROM contents */ -#define EWRK3_SET_EEPROM 0x0f /* Set the EEPROM contents */ -#define EWRK3_GET_CMR 0x10 /* Get the CMR Register contents */ -#define EWRK3_CLR_TX_CUT_THRU 0x11 /* Clear the TX cut through mode */ -#define EWRK3_SET_TX_CUT_THRU 0x12 /* Set the TX cut through mode */ diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig index b5afe21..ee26ce7 100644 --- a/drivers/net/ethernet/dlink/Kconfig +++ b/drivers/net/ethernet/dlink/Kconfig @@ -5,7 +5,7 @@ config NET_VENDOR_DLINK bool "D-Link devices" default y - depends on PCI || PARPORT + depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -18,36 +18,6 @@ config NET_VENDOR_DLINK if NET_VENDOR_DLINK -config DE600 - tristate "D-Link DE600 pocket adapter support" - depends on PARPORT - ---help--- - This is a network (Ethernet) device which attaches to your parallel - port. Read <file:Documentation/networking/DLINK.txt> as well as the - Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>, if you want to use - this. It is possible to have several devices share a single parallel - port and it is safe to compile the corresponding drivers into the - kernel. - - To compile this driver as a module, choose M here: the module - will be called de600. - -config DE620 - tristate "D-Link DE620 pocket adapter support" - depends on PARPORT - ---help--- - This is a network (Ethernet) device which attaches to your parallel - port. Read <file:Documentation/networking/DLINK.txt> as well as the - Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>, if you want to use - this. It is possible to have several devices share a single parallel - port and it is safe to compile the corresponding drivers into the - kernel. - - To compile this driver as a module, choose M here: the module - will be called de620. - config DL2K tristate "DL2000/TC902x-based Gigabit Ethernet support" depends on PCI diff --git a/drivers/net/ethernet/dlink/Makefile b/drivers/net/ethernet/dlink/Makefile index c705eaa..40085f6 100644 --- a/drivers/net/ethernet/dlink/Makefile +++ b/drivers/net/ethernet/dlink/Makefile @@ -2,7 +2,5 @@ # Makefile for the D-Link network device drivers. # -obj-$(CONFIG_DE600) += de600.o -obj-$(CONFIG_DE620) += de620.o obj-$(CONFIG_DL2K) += dl2k.o obj-$(CONFIG_SUNDANCE) += sundance.o diff --git a/drivers/net/ethernet/dlink/de600.c b/drivers/net/ethernet/dlink/de600.c deleted file mode 100644 index 414f0ee..0000000 --- a/drivers/net/ethernet/dlink/de600.c +++ /dev/null @@ -1,529 +0,0 @@ -static const char version[] = "de600.c: $Revision: 1.41-2.5 $, Bjorn Ekwall (bj0rn@blox.se)\n"; -/* - * de600.c - * - * Linux driver for the D-Link DE-600 Ethernet pocket adapter. - * - * Portions (C) Copyright 1993, 1994 by Bjorn Ekwall - * The Author may be reached as bj0rn@blox.se - * - * Based on adapter information gathered from DE600.ASM by D-Link Inc., - * as included on disk C in the v.2.11 of PC/TCP from FTP Software. - * For DE600.asm: - * Portions (C) Copyright 1990 D-Link, Inc. - * Copyright, 1988-1992, Russell Nelson, Crynwr Software - * - * Adapted to the sample network driver core for linux, - * written by: Donald Becker <becker@super.org> - * (Now at <becker@scyld.com>) - * - **************************************************************/ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - **************************************************************/ - -/* Add more time here if your adapter won't work OK: */ -#define DE600_SLOW_DOWN udelay(delay_time) - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/string.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/inet.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> - -#include <asm/io.h> - -#include "de600.h" - -static bool check_lost = true; -module_param(check_lost, bool, 0); -MODULE_PARM_DESC(check_lost, "If set then check for unplugged de600"); - -static unsigned int delay_time = 10; -module_param(delay_time, int, 0); -MODULE_PARM_DESC(delay_time, "DE-600 deley on I/O in microseconds"); - - -/* - * D-Link driver variables: - */ - -static volatile int rx_page; - -#define TX_PAGES 2 -static volatile int tx_fifo[TX_PAGES]; -static volatile int tx_fifo_in; -static volatile int tx_fifo_out; -static volatile int free_tx_pages = TX_PAGES; -static int was_down; -static DEFINE_SPINLOCK(de600_lock); - -static inline u8 de600_read_status(struct net_device *dev) -{ - u8 status; - - outb_p(STATUS, DATA_PORT); - status = inb(STATUS_PORT); - outb_p(NULL_COMMAND | HI_NIBBLE, DATA_PORT); - - return status; -} - -static inline u8 de600_read_byte(unsigned char type, struct net_device *dev) -{ - /* dev used by macros */ - u8 lo; - outb_p((type), DATA_PORT); - lo = ((unsigned char)inb(STATUS_PORT)) >> 4; - outb_p((type) | HI_NIBBLE, DATA_PORT); - return ((unsigned char)inb(STATUS_PORT) & (unsigned char)0xf0) | lo; -} - -/* - * Open/initialize the board. This is called (in the current kernel) - * after booting when 'ifconfig <dev->name> $IP_ADDR' is run (in rc.inet1). - * - * This routine should set everything up anew at each open, even - * registers that "should" only need to be set once at boot, so that - * there is a non-reboot way to recover if something goes wrong. - */ - -static int de600_open(struct net_device *dev) -{ - unsigned long flags; - int ret = request_irq(DE600_IRQ, de600_interrupt, 0, dev->name, dev); - if (ret) { - printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, DE600_IRQ); - return ret; - } - spin_lock_irqsave(&de600_lock, flags); - ret = adapter_init(dev); - spin_unlock_irqrestore(&de600_lock, flags); - return ret; -} - -/* - * The inverse routine to de600_open(). - */ - -static int de600_close(struct net_device *dev) -{ - select_nic(); - rx_page = 0; - de600_put_command(RESET); - de600_put_command(STOP_RESET); - de600_put_command(0); - select_prn(); - free_irq(DE600_IRQ, dev); - return 0; -} - -static inline void trigger_interrupt(struct net_device *dev) -{ - de600_put_command(FLIP_IRQ); - select_prn(); - DE600_SLOW_DOWN; - select_nic(); - de600_put_command(0); -} - -/* - * Copy a buffer to the adapter transmit page memory. - * Start sending. - */ - -static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - unsigned long flags; - int transmit_from; - int len; - int tickssofar; - u8 *buffer = skb->data; - int i; - - if (free_tx_pages <= 0) { /* Do timeouts, to avoid hangs. */ - tickssofar = jiffies - dev_trans_start(dev); - if (tickssofar < HZ/20) - return NETDEV_TX_BUSY; - /* else */ - printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem"); - /* Restart the adapter. */ - spin_lock_irqsave(&de600_lock, flags); - if (adapter_init(dev)) { - spin_unlock_irqrestore(&de600_lock, flags); - return NETDEV_TX_BUSY; - } - spin_unlock_irqrestore(&de600_lock, flags); - } - - /* Start real output */ - pr_debug("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages); - - if ((len = skb->len) < RUNT) - len = RUNT; - - spin_lock_irqsave(&de600_lock, flags); - select_nic(); - tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len; - tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES; /* Next free tx page */ - - if(check_lost) - { - /* This costs about 40 instructions per packet... */ - de600_setup_address(NODE_ADDRESS, RW_ADDR); - de600_read_byte(READ_DATA, dev); - if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) { - if (adapter_init(dev)) { - spin_unlock_irqrestore(&de600_lock, flags); - return NETDEV_TX_BUSY; - } - } - } - - de600_setup_address(transmit_from, RW_ADDR); - for (i = 0; i < skb->len ; ++i, ++buffer) - de600_put_byte(*buffer); - for (; i < len; ++i) - de600_put_byte(0); - - if (free_tx_pages-- == TX_PAGES) { /* No transmission going on */ - dev->trans_start = jiffies; - netif_start_queue(dev); /* allow more packets into adapter */ - /* Send page and generate a faked interrupt */ - de600_setup_address(transmit_from, TX_ADDR); - de600_put_command(TX_ENABLE); - } - else { - if (free_tx_pages) - netif_start_queue(dev); - else - netif_stop_queue(dev); - select_prn(); - } - spin_unlock_irqrestore(&de600_lock, flags); - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -/* - * The typical workload of the driver: - * Handle the network interface interrupts. - */ - -static irqreturn_t de600_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - u8 irq_status; - int retrig = 0; - int boguscount = 0; - - spin_lock(&de600_lock); - - select_nic(); - irq_status = de600_read_status(dev); - - do { - pr_debug("de600_interrupt (%02X)\n", irq_status); - - if (irq_status & RX_GOOD) - de600_rx_intr(dev); - else if (!(irq_status & RX_BUSY)) - de600_put_command(RX_ENABLE); - - /* Any transmission in progress? */ - if (free_tx_pages < TX_PAGES) - retrig = de600_tx_intr(dev, irq_status); - else - retrig = 0; - - irq_status = de600_read_status(dev); - } while ( (irq_status & RX_GOOD) || ((++boguscount < 100) && retrig) ); - /* - * Yeah, it _looks_ like busy waiting, smells like busy waiting - * and I know it's not PC, but please, it will only occur once - * in a while and then only for a loop or so (< 1ms for sure!) - */ - - /* Enable adapter interrupts */ - select_prn(); - if (retrig) - trigger_interrupt(dev); - spin_unlock(&de600_lock); - return IRQ_HANDLED; -} - -static int de600_tx_intr(struct net_device *dev, int irq_status) -{ - /* - * Returns 1 if tx still not done - */ - - /* Check if current transmission is done yet */ - if (irq_status & TX_BUSY) - return 1; /* tx not done, try again */ - - /* else */ - /* If last transmission OK then bump fifo index */ - if (!(irq_status & TX_FAILED16)) { - tx_fifo_out = (tx_fifo_out + 1) % TX_PAGES; - ++free_tx_pages; - dev->stats.tx_packets++; - netif_wake_queue(dev); - } - - /* More to send, or resend last packet? */ - if ((free_tx_pages < TX_PAGES) || (irq_status & TX_FAILED16)) { - dev->trans_start = jiffies; - de600_setup_address(tx_fifo[tx_fifo_out], TX_ADDR); - de600_put_command(TX_ENABLE); - return 1; - } - /* else */ - - return 0; -} - -/* - * We have a good packet, get it out of the adapter. - */ -static void de600_rx_intr(struct net_device *dev) -{ - struct sk_buff *skb; - int i; - int read_from; - int size; - unsigned char *buffer; - - /* Get size of received packet */ - size = de600_read_byte(RX_LEN, dev); /* low byte */ - size += (de600_read_byte(RX_LEN, dev) << 8); /* high byte */ - size -= 4; /* Ignore trailing 4 CRC-bytes */ - - /* Tell adapter where to store next incoming packet, enable receiver */ - read_from = rx_page_adr(); - next_rx_page(); - de600_put_command(RX_ENABLE); - - if ((size < 32) || (size > 1535)) { - printk(KERN_WARNING "%s: Bogus packet size %d.\n", dev->name, size); - if (size > 10000) - adapter_init(dev); - return; - } - - skb = netdev_alloc_skb(dev, size + 2); - if (skb == NULL) { - printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size); - return; - } - /* else */ - - skb_reserve(skb,2); /* Align */ - - /* 'skb->data' points to the start of sk_buff data area. */ - buffer = skb_put(skb,size); - - /* copy the packet into the buffer */ - de600_setup_address(read_from, RW_ADDR); - for (i = size; i > 0; --i, ++buffer) - *buffer = de600_read_byte(READ_DATA, dev); - - skb->protocol=eth_type_trans(skb,dev); - - netif_rx(skb); - - /* update stats */ - dev->stats.rx_packets++; /* count all receives */ - dev->stats.rx_bytes += size; /* count all received bytes */ - - /* - * If any worth-while packets have been received, netif_rx() - * will work on them when we get to the tasklets. - */ -} - -static const struct net_device_ops de600_netdev_ops = { - .ndo_open = de600_open, - .ndo_stop = de600_close, - .ndo_start_xmit = de600_start_xmit, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - - -static struct net_device * __init de600_probe(void) -{ - int i; - struct net_device *dev; - int err; - - dev = alloc_etherdev(0); - if (!dev) - return ERR_PTR(-ENOMEM); - - - if (!request_region(DE600_IO, 3, "de600")) { - printk(KERN_WARNING "DE600: port 0x%x busy\n", DE600_IO); - err = -EBUSY; - goto out; - } - - printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name); - /* Alpha testers must have the version number to report bugs. */ - pr_debug("%s", version); - - /* probe for adapter */ - err = -ENODEV; - rx_page = 0; - select_nic(); - (void)de600_read_status(dev); - de600_put_command(RESET); - de600_put_command(STOP_RESET); - if (de600_read_status(dev) & 0xf0) { - printk(": not at I/O %#3x.\n", DATA_PORT); - goto out1; - } - - /* - * Maybe we found one, - * have to check if it is a D-Link DE-600 adapter... - */ - - /* Get the adapter ethernet address from the ROM */ - de600_setup_address(NODE_ADDRESS, RW_ADDR); - for (i = 0; i < ETH_ALEN; i++) { - dev->dev_addr[i] = de600_read_byte(READ_DATA, dev); - dev->broadcast[i] = 0xff; - } - - /* Check magic code */ - if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) { - /* OK, install real address */ - dev->dev_addr[0] = 0x00; - dev->dev_addr[1] = 0x80; - dev->dev_addr[2] = 0xc8; - dev->dev_addr[3] &= 0x0f; - dev->dev_addr[3] |= 0x70; - } else { - printk(" not identified in the printer port\n"); - goto out1; - } - - printk(", Ethernet Address: %pM\n", dev->dev_addr); - - dev->netdev_ops = &de600_netdev_ops; - - dev->flags&=~IFF_MULTICAST; - - select_prn(); - - err = register_netdev(dev); - if (err) - goto out1; - - return dev; - -out1: - release_region(DE600_IO, 3); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static int adapter_init(struct net_device *dev) -{ - int i; - - select_nic(); - rx_page = 0; /* used by RESET */ - de600_put_command(RESET); - de600_put_command(STOP_RESET); - - /* Check if it is still there... */ - /* Get the some bytes of the adapter ethernet address from the ROM */ - de600_setup_address(NODE_ADDRESS, RW_ADDR); - de600_read_byte(READ_DATA, dev); - if ((de600_read_byte(READ_DATA, dev) != 0xde) || - (de600_read_byte(READ_DATA, dev) != 0x15)) { - /* was: if (de600_read_status(dev) & 0xf0) { */ - printk("Something has happened to the DE-600! Please check it and do a new ifconfig!\n"); - /* Goodbye, cruel world... */ - dev->flags &= ~IFF_UP; - de600_close(dev); - was_down = 1; - netif_stop_queue(dev); /* Transmit busy... */ - return 1; /* failed */ - } - - if (was_down) { - printk(KERN_INFO "%s: Thanks, I feel much better now!\n", dev->name); - was_down = 0; - } - - tx_fifo_in = 0; - tx_fifo_out = 0; - free_tx_pages = TX_PAGES; - - - /* set the ether address. */ - de600_setup_address(NODE_ADDRESS, RW_ADDR); - for (i = 0; i < ETH_ALEN; i++) - de600_put_byte(dev->dev_addr[i]); - - /* where to start saving incoming packets */ - rx_page = RX_BP | RX_BASE_PAGE; - de600_setup_address(MEM_4K, RW_ADDR); - /* Enable receiver */ - de600_put_command(RX_ENABLE); - select_prn(); - - netif_start_queue(dev); - - return 0; /* OK */ -} - -static struct net_device *de600_dev; - -static int __init de600_init(void) -{ - de600_dev = de600_probe(); - if (IS_ERR(de600_dev)) - return PTR_ERR(de600_dev); - return 0; -} - -static void __exit de600_exit(void) -{ - unregister_netdev(de600_dev); - release_region(DE600_IO, 3); - free_netdev(de600_dev); -} - -module_init(de600_init); -module_exit(de600_exit); - -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/dlink/de600.h b/drivers/net/ethernet/dlink/de600.h deleted file mode 100644 index e80ecba..0000000 --- a/drivers/net/ethernet/dlink/de600.h +++ /dev/null @@ -1,168 +0,0 @@ -/************************************************** - * * - * Definition of D-Link Ethernet Pocket adapter * - * * - **************************************************/ -/* - * D-Link Ethernet pocket adapter ports - */ -/* - * OK, so I'm cheating, but there are an awful lot of - * reads and writes in order to get anything in and out - * of the DE-600 with 4 bits at a time in the parallel port, - * so every saved instruction really helps :-) - */ - -#ifndef DE600_IO -#define DE600_IO 0x378 -#endif - -#define DATA_PORT (DE600_IO) -#define STATUS_PORT (DE600_IO + 1) -#define COMMAND_PORT (DE600_IO + 2) - -#ifndef DE600_IRQ -#define DE600_IRQ 7 -#endif -/* - * It really should look like this, and autoprobing as well... - * -#define DATA_PORT (dev->base_addr + 0) -#define STATUS_PORT (dev->base_addr + 1) -#define COMMAND_PORT (dev->base_addr + 2) -#define DE600_IRQ dev->irq - */ - -/* - * D-Link COMMAND_PORT commands - */ -#define SELECT_NIC 0x04 /* select Network Interface Card */ -#define SELECT_PRN 0x1c /* select Printer */ -#define NML_PRN 0xec /* normal Printer situation */ -#define IRQEN 0x10 /* enable IRQ line */ - -/* - * D-Link STATUS_PORT - */ -#define RX_BUSY 0x80 -#define RX_GOOD 0x40 -#define TX_FAILED16 0x10 -#define TX_BUSY 0x08 - -/* - * D-Link DATA_PORT commands - * command in low 4 bits - * data in high 4 bits - * select current data nibble with HI_NIBBLE bit - */ -#define WRITE_DATA 0x00 /* write memory */ -#define READ_DATA 0x01 /* read memory */ -#define STATUS 0x02 /* read status register */ -#define COMMAND 0x03 /* write command register (see COMMAND below) */ -#define NULL_COMMAND 0x04 /* null command */ -#define RX_LEN 0x05 /* read received packet length */ -#define TX_ADDR 0x06 /* set adapter transmit memory address */ -#define RW_ADDR 0x07 /* set adapter read/write memory address */ -#define HI_NIBBLE 0x08 /* read/write the high nibble of data, - or-ed with rest of command */ - -/* - * command register, accessed through DATA_PORT with low bits = COMMAND - */ -#define RX_ALL 0x01 /* PROMISCUOUS */ -#define RX_BP 0x02 /* default: BROADCAST & PHYSICAL ADDRESS */ -#define RX_MBP 0x03 /* MULTICAST, BROADCAST & PHYSICAL ADDRESS */ - -#define TX_ENABLE 0x04 /* bit 2 */ -#define RX_ENABLE 0x08 /* bit 3 */ - -#define RESET 0x80 /* set bit 7 high */ -#define STOP_RESET 0x00 /* set bit 7 low */ - -/* - * data to command register - * (high 4 bits in write to DATA_PORT) - */ -#define RX_PAGE2_SELECT 0x10 /* bit 4, only 2 pages to select */ -#define RX_BASE_PAGE 0x20 /* bit 5, always set when specifying RX_ADDR */ -#define FLIP_IRQ 0x40 /* bit 6 */ - -/* - * D-Link adapter internal memory: - * - * 0-2K 1:st transmit page (send from pointer up to 2K) - * 2-4K 2:nd transmit page (send from pointer up to 4K) - * - * 4-6K 1:st receive page (data from 4K upwards) - * 6-8K 2:nd receive page (data from 6K upwards) - * - * 8K+ Adapter ROM (contains magic code and last 3 bytes of Ethernet address) - */ -#define MEM_2K 0x0800 /* 2048 */ -#define MEM_4K 0x1000 /* 4096 */ -#define MEM_6K 0x1800 /* 6144 */ -#define NODE_ADDRESS 0x2000 /* 8192 */ - -#define RUNT 60 /* Too small Ethernet packet */ - -/************************************************** - * * - * End of definition * - * * - **************************************************/ - -/* - * Index to functions, as function prototypes. - */ -/* Routines used internally. (See "convenience macros") */ -static u8 de600_read_status(struct net_device *dev); -static u8 de600_read_byte(unsigned char type, struct net_device *dev); - -/* Put in the device structure. */ -static int de600_open(struct net_device *dev); -static int de600_close(struct net_device *dev); -static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev); - -/* Dispatch from interrupts. */ -static irqreturn_t de600_interrupt(int irq, void *dev_id); -static int de600_tx_intr(struct net_device *dev, int irq_status); -static void de600_rx_intr(struct net_device *dev); - -/* Initialization */ -static void trigger_interrupt(struct net_device *dev); -static int adapter_init(struct net_device *dev); - -/* - * Convenience macros/functions for D-Link adapter - */ - -#define select_prn() outb_p(SELECT_PRN, COMMAND_PORT); DE600_SLOW_DOWN -#define select_nic() outb_p(SELECT_NIC, COMMAND_PORT); DE600_SLOW_DOWN - -/* Thanks for hints from Mark Burton <markb@ordern.demon.co.uk> */ -#define de600_put_byte(data) ( \ - outb_p(((data) << 4) | WRITE_DATA , DATA_PORT), \ - outb_p(((data) & 0xf0) | WRITE_DATA | HI_NIBBLE, DATA_PORT)) - -/* - * The first two outb_p()'s below could perhaps be deleted if there - * would be more delay in the last two. Not certain about it yet... - */ -#define de600_put_command(cmd) ( \ - outb_p(( rx_page << 4) | COMMAND , DATA_PORT), \ - outb_p(( rx_page & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT), \ - outb_p(((rx_page | cmd) << 4) | COMMAND , DATA_PORT), \ - outb_p(((rx_page | cmd) & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT)) - -#define de600_setup_address(addr,type) ( \ - outb_p((((addr) << 4) & 0xf0) | type , DATA_PORT), \ - outb_p(( (addr) & 0xf0) | type | HI_NIBBLE, DATA_PORT), \ - outb_p((((addr) >> 4) & 0xf0) | type , DATA_PORT), \ - outb_p((((addr) >> 8) & 0xf0) | type | HI_NIBBLE, DATA_PORT)) - -#define rx_page_adr() ((rx_page & RX_PAGE2_SELECT)?(MEM_6K):(MEM_4K)) - -/* Flip bit, only 2 pages */ -#define next_rx_page() (rx_page ^= RX_PAGE2_SELECT) - -#define tx_page_adr(a) (((a) + 1) * MEM_2K) diff --git a/drivers/net/ethernet/dlink/de620.c b/drivers/net/ethernet/dlink/de620.c deleted file mode 100644 index 2e2bc60..0000000 --- a/drivers/net/ethernet/dlink/de620.c +++ /dev/null @@ -1,987 +0,0 @@ -/* - * de620.c $Revision: 1.40 $ BETA - * - * - * Linux driver for the D-Link DE-620 Ethernet pocket adapter. - * - * Portions (C) Copyright 1993, 1994 by Bjorn Ekwall <bj0rn@blox.se> - * - * Based on adapter information gathered from DOS packetdriver - * sources from D-Link Inc: (Special thanks to Henry Ngai of D-Link.) - * Portions (C) Copyright D-Link SYSTEM Inc. 1991, 1992 - * Copyright, 1988, Russell Nelson, Crynwr Software - * - * Adapted to the sample network driver core for linux, - * written by: Donald Becker <becker@super.org> - * (Now at <becker@scyld.com>) - * - * Valuable assistance from: - * J. Joshua Kopper <kopper@rtsg.mot.com> - * Olav Kvittem <Olav.Kvittem@uninett.no> - * Germano Caronni <caronni@nessie.cs.id.ethz.ch> - * Jeremy Fitzhardinge <jeremy@suite.sw.oz.au> - * - *****************************************************************************/ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - *****************************************************************************/ -static const char version[] = - "de620.c: $Revision: 1.40 $, Bjorn Ekwall <bj0rn@blox.se>\n"; - -/*********************************************************************** - * - * "Tuning" section. - * - * Compile-time options: (see below for descriptions) - * -DDE620_IO=0x378 (lpt1) - * -DDE620_IRQ=7 (lpt1) - * -DSHUTDOWN_WHEN_LOST - * -DCOUNT_LOOPS - * -DLOWSPEED - * -DREAD_DELAY - * -DWRITE_DELAY - */ - -/* - * This driver assumes that the printer port is a "normal", - * dumb, uni-directional port! - * If your port is "fancy" in any way, please try to set it to "normal" - * with your BIOS setup. I have no access to machines with bi-directional - * ports, so I can't test such a driver :-( - * (Yes, I _know_ it is possible to use DE620 with bidirectional ports...) - * - * There are some clones of DE620 out there, with different names. - * If the current driver does not recognize a clone, try to change - * the following #define to: - * - * #define DE620_CLONE 1 - */ -#define DE620_CLONE 0 - -/* - * If the adapter has problems with high speeds, enable this #define - * otherwise full printerport speed will be attempted. - * - * You can tune the READ_DELAY/WRITE_DELAY below if you enable LOWSPEED - * -#define LOWSPEED - */ - -#ifndef READ_DELAY -#define READ_DELAY 100 /* adapter internal read delay in 100ns units */ -#endif - -#ifndef WRITE_DELAY -#define WRITE_DELAY 100 /* adapter internal write delay in 100ns units */ -#endif - -/* - * Enable this #define if you want the adapter to do a "ifconfig down" on - * itself when we have detected that something is possibly wrong with it. - * The default behaviour is to retry with "adapter_init()" until success. - * This should be used for debugging purposes only. - * -#define SHUTDOWN_WHEN_LOST - */ - -#ifdef LOWSPEED -/* - * Enable this #define if you want to see debugging output that show how long - * we have to wait before the DE-620 is ready for the next read/write/command. - * -#define COUNT_LOOPS - */ -#endif - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/string.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/inet.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> - -#include <asm/io.h> - -/* Constant definitions for the DE-620 registers, commands and bits */ -#include "de620.h" - -typedef unsigned char byte; - -/******************************************************* - * * - * Definition of D-Link DE-620 Ethernet Pocket adapter * - * See also "de620.h" * - * * - *******************************************************/ -#ifndef DE620_IO /* Compile-time configurable */ -#define DE620_IO 0x378 -#endif - -#ifndef DE620_IRQ /* Compile-time configurable */ -#define DE620_IRQ 7 -#endif - -#define DATA_PORT (dev->base_addr) -#define STATUS_PORT (dev->base_addr + 1) -#define COMMAND_PORT (dev->base_addr + 2) - -#define RUNT 60 /* Too small Ethernet packet */ -#define GIANT 1514 /* largest legal size packet, no fcs */ - -/* - * Force media with insmod: - * insmod de620.o bnc=1 - * or - * insmod de620.o utp=1 - * - * Force io and/or irq with insmod: - * insmod de620.o io=0x378 irq=7 - * - * Make a clone skip the Ethernet-address range check: - * insmod de620.o clone=1 - */ -static int bnc; -static int utp; -static int io = DE620_IO; -static int irq = DE620_IRQ; -static int clone = DE620_CLONE; - -static spinlock_t de620_lock; - -module_param(bnc, int, 0); -module_param(utp, int, 0); -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(clone, int, 0); -MODULE_PARM_DESC(bnc, "DE-620 set BNC medium (0-1)"); -MODULE_PARM_DESC(utp, "DE-620 set UTP medium (0-1)"); -MODULE_PARM_DESC(io, "DE-620 I/O base address,required"); -MODULE_PARM_DESC(irq, "DE-620 IRQ number,required"); -MODULE_PARM_DESC(clone, "Check also for non-D-Link DE-620 clones (0-1)"); - -/*********************************************** - * * - * Index to functions, as function prototypes. * - * * - ***********************************************/ - -/* - * Routines used internally. (See also "convenience macros.. below") - */ - -/* Put in the device structure. */ -static int de620_open(struct net_device *); -static int de620_close(struct net_device *); -static void de620_set_multicast_list(struct net_device *); -static int de620_start_xmit(struct sk_buff *, struct net_device *); - -/* Dispatch from interrupts. */ -static irqreturn_t de620_interrupt(int, void *); -static int de620_rx_intr(struct net_device *); - -/* Initialization */ -static int adapter_init(struct net_device *); -static int read_eeprom(struct net_device *); - - -/* - * D-Link driver variables: - */ -#define SCR_DEF NIBBLEMODE |INTON | SLEEP | AUTOTX -#define TCR_DEF RXPB /* not used: | TXSUCINT | T16INT */ -#define DE620_RX_START_PAGE 12 /* 12 pages (=3k) reserved for tx */ -#define DEF_NIC_CMD IRQEN | ICEN | DS1 - -static volatile byte NIC_Cmd; -static volatile byte next_rx_page; -static byte first_rx_page; -static byte last_rx_page; -static byte EIPRegister; - -static struct nic { - byte NodeID[6]; - byte RAM_Size; - byte Model; - byte Media; - byte SCR; -} nic_data; - -/********************************************************** - * * - * Convenience macros/functions for D-Link DE-620 adapter * - * * - **********************************************************/ -#define de620_tx_buffs(dd) (inb(STATUS_PORT) & (TXBF0 | TXBF1)) -#define de620_flip_ds(dd) NIC_Cmd ^= DS0 | DS1; outb(NIC_Cmd, COMMAND_PORT); - -/* Check for ready-status, and return a nibble (high 4 bits) for data input */ -#ifdef COUNT_LOOPS -static int tot_cnt; -#endif -static inline byte -de620_ready(struct net_device *dev) -{ - byte value; - register short int cnt = 0; - - while ((((value = inb(STATUS_PORT)) & READY) == 0) && (cnt <= 1000)) - ++cnt; - -#ifdef COUNT_LOOPS - tot_cnt += cnt; -#endif - return value & 0xf0; /* nibble */ -} - -static inline void -de620_send_command(struct net_device *dev, byte cmd) -{ - de620_ready(dev); - if (cmd == W_DUMMY) - outb(NIC_Cmd, COMMAND_PORT); - - outb(cmd, DATA_PORT); - - outb(NIC_Cmd ^ CS0, COMMAND_PORT); - de620_ready(dev); - outb(NIC_Cmd, COMMAND_PORT); -} - -static inline void -de620_put_byte(struct net_device *dev, byte value) -{ - /* The de620_ready() makes 7 loops, on the average, on a DX2/66 */ - de620_ready(dev); - outb(value, DATA_PORT); - de620_flip_ds(dev); -} - -static inline byte -de620_read_byte(struct net_device *dev) -{ - byte value; - - /* The de620_ready() makes 7 loops, on the average, on a DX2/66 */ - value = de620_ready(dev); /* High nibble */ - de620_flip_ds(dev); - value |= de620_ready(dev) >> 4; /* Low nibble */ - return value; -} - -static inline void -de620_write_block(struct net_device *dev, byte *buffer, int count, int pad) -{ -#ifndef LOWSPEED - byte uflip = NIC_Cmd ^ (DS0 | DS1); - byte dflip = NIC_Cmd; -#else /* LOWSPEED */ -#ifdef COUNT_LOOPS - int bytes = count; -#endif /* COUNT_LOOPS */ -#endif /* LOWSPEED */ - -#ifdef LOWSPEED -#ifdef COUNT_LOOPS - tot_cnt = 0; -#endif /* COUNT_LOOPS */ - /* No further optimization useful, the limit is in the adapter. */ - for ( ; count > 0; --count, ++buffer) { - de620_put_byte(dev,*buffer); - } - for ( count = pad ; count > 0; --count, ++buffer) { - de620_put_byte(dev, 0); - } - de620_send_command(dev,W_DUMMY); -#ifdef COUNT_LOOPS - /* trial debug output: loops per byte in de620_ready() */ - printk("WRITE(%d)\n", tot_cnt/((bytes?bytes:1))); -#endif /* COUNT_LOOPS */ -#else /* not LOWSPEED */ - for ( ; count > 0; count -=2) { - outb(*buffer++, DATA_PORT); - outb(uflip, COMMAND_PORT); - outb(*buffer++, DATA_PORT); - outb(dflip, COMMAND_PORT); - } - de620_send_command(dev,W_DUMMY); -#endif /* LOWSPEED */ -} - -static inline void -de620_read_block(struct net_device *dev, byte *data, int count) -{ -#ifndef LOWSPEED - byte value; - byte uflip = NIC_Cmd ^ (DS0 | DS1); - byte dflip = NIC_Cmd; -#else /* LOWSPEED */ -#ifdef COUNT_LOOPS - int bytes = count; - - tot_cnt = 0; -#endif /* COUNT_LOOPS */ -#endif /* LOWSPEED */ - -#ifdef LOWSPEED - /* No further optimization useful, the limit is in the adapter. */ - while (count-- > 0) { - *data++ = de620_read_byte(dev); - de620_flip_ds(dev); - } -#ifdef COUNT_LOOPS - /* trial debug output: loops per byte in de620_ready() */ - printk("READ(%d)\n", tot_cnt/(2*(bytes?bytes:1))); -#endif /* COUNT_LOOPS */ -#else /* not LOWSPEED */ - while (count-- > 0) { - value = inb(STATUS_PORT) & 0xf0; /* High nibble */ - outb(uflip, COMMAND_PORT); - *data++ = value | inb(STATUS_PORT) >> 4; /* Low nibble */ - outb(dflip , COMMAND_PORT); - } -#endif /* LOWSPEED */ -} - -static inline void -de620_set_delay(struct net_device *dev) -{ - de620_ready(dev); - outb(W_DFR, DATA_PORT); - outb(NIC_Cmd ^ CS0, COMMAND_PORT); - - de620_ready(dev); -#ifdef LOWSPEED - outb(WRITE_DELAY, DATA_PORT); -#else - outb(0, DATA_PORT); -#endif - de620_flip_ds(dev); - - de620_ready(dev); -#ifdef LOWSPEED - outb(READ_DELAY, DATA_PORT); -#else - outb(0, DATA_PORT); -#endif - de620_flip_ds(dev); -} - -static inline void -de620_set_register(struct net_device *dev, byte reg, byte value) -{ - de620_ready(dev); - outb(reg, DATA_PORT); - outb(NIC_Cmd ^ CS0, COMMAND_PORT); - - de620_put_byte(dev, value); -} - -static inline byte -de620_get_register(struct net_device *dev, byte reg) -{ - byte value; - - de620_send_command(dev,reg); - value = de620_read_byte(dev); - de620_send_command(dev,W_DUMMY); - - return value; -} - -/********************************************************************* - * - * Open/initialize the board. - * - * This routine should set everything up anew at each open, even - * registers that "should" only need to be set once at boot, so that - * there is a non-reboot way to recover if something goes wrong. - * - */ -static int de620_open(struct net_device *dev) -{ - int ret = request_irq(dev->irq, de620_interrupt, 0, dev->name, dev); - if (ret) { - printk (KERN_ERR "%s: unable to get IRQ %d\n", dev->name, dev->irq); - return ret; - } - - if (adapter_init(dev)) { - ret = -EIO; - goto out_free_irq; - } - - netif_start_queue(dev); - return 0; - -out_free_irq: - free_irq(dev->irq, dev); - return ret; -} - -/************************************************ - * - * The inverse routine to de620_open(). - * - */ - -static int de620_close(struct net_device *dev) -{ - netif_stop_queue(dev); - /* disable recv */ - de620_set_register(dev, W_TCR, RXOFF); - free_irq(dev->irq, dev); - return 0; -} - -/********************************************* - * - * Set or clear the multicast filter for this adaptor. - * (no real multicast implemented for the DE-620, but she can be promiscuous...) - * - */ - -static void de620_set_multicast_list(struct net_device *dev) -{ - if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC)) - { /* Enable promiscuous mode */ - de620_set_register(dev, W_TCR, (TCR_DEF & ~RXPBM) | RXALL); - } - else - { /* Disable promiscuous mode, use normal mode */ - de620_set_register(dev, W_TCR, TCR_DEF); - } -} - -/******************************************************* - * - * Handle timeouts on transmit - */ - -static void de620_timeout(struct net_device *dev) -{ - printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name, "network cable problem"); - /* Restart the adapter. */ - if (!adapter_init(dev)) /* maybe close it */ - netif_wake_queue(dev); -} - -/******************************************************* - * - * Copy a buffer to the adapter transmit page memory. - * Start sending. - */ -static int de620_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - unsigned long flags; - int len; - byte *buffer = skb->data; - byte using_txbuf; - - using_txbuf = de620_tx_buffs(dev); /* Peek at the adapter */ - - netif_stop_queue(dev); - - - if ((len = skb->len) < RUNT) - len = RUNT; - if (len & 1) /* send an even number of bytes */ - ++len; - - /* Start real output */ - - spin_lock_irqsave(&de620_lock, flags); - pr_debug("de620_start_xmit: len=%d, bufs 0x%02x\n", - (int)skb->len, using_txbuf); - - /* select a free tx buffer. if there is one... */ - switch (using_txbuf) { - default: /* both are free: use TXBF0 */ - case TXBF1: /* use TXBF0 */ - de620_send_command(dev,W_CR | RW0); - using_txbuf |= TXBF0; - break; - - case TXBF0: /* use TXBF1 */ - de620_send_command(dev,W_CR | RW1); - using_txbuf |= TXBF1; - break; - - case (TXBF0 | TXBF1): /* NONE!!! */ - printk(KERN_WARNING "%s: No tx-buffer available!\n", dev->name); - spin_unlock_irqrestore(&de620_lock, flags); - return NETDEV_TX_BUSY; - } - de620_write_block(dev, buffer, skb->len, len-skb->len); - - if(!(using_txbuf == (TXBF0 | TXBF1))) - netif_wake_queue(dev); - - dev->stats.tx_packets++; - spin_unlock_irqrestore(&de620_lock, flags); - dev_kfree_skb (skb); - return NETDEV_TX_OK; -} - -/***************************************************** - * - * Handle the network interface interrupts. - * - */ -static irqreturn_t -de620_interrupt(int irq_in, void *dev_id) -{ - struct net_device *dev = dev_id; - byte irq_status; - int bogus_count = 0; - int again = 0; - - spin_lock(&de620_lock); - - /* Read the status register (_not_ the status port) */ - irq_status = de620_get_register(dev, R_STS); - - pr_debug("de620_interrupt (%2.2X)\n", irq_status); - - if (irq_status & RXGOOD) { - do { - again = de620_rx_intr(dev); - pr_debug("again=%d\n", again); - } - while (again && (++bogus_count < 100)); - } - - if(de620_tx_buffs(dev) != (TXBF0 | TXBF1)) - netif_wake_queue(dev); - - spin_unlock(&de620_lock); - return IRQ_HANDLED; -} - -/************************************** - * - * Get a packet from the adapter - * - * Send it "upstairs" - * - */ -static int de620_rx_intr(struct net_device *dev) -{ - struct header_buf { - byte status; - byte Rx_NextPage; - unsigned short Rx_ByteCount; - } header_buf; - struct sk_buff *skb; - int size; - byte *buffer; - byte pagelink; - byte curr_page; - - pr_debug("de620_rx_intr: next_rx_page = %d\n", next_rx_page); - - /* Tell the adapter that we are going to read data, and from where */ - de620_send_command(dev, W_CR | RRN); - de620_set_register(dev, W_RSA1, next_rx_page); - de620_set_register(dev, W_RSA0, 0); - - /* Deep breath, and away we goooooo */ - de620_read_block(dev, (byte *)&header_buf, sizeof(struct header_buf)); - pr_debug("page status=0x%02x, nextpage=%d, packetsize=%d\n", - header_buf.status, header_buf.Rx_NextPage, - header_buf.Rx_ByteCount); - - /* Plausible page header? */ - pagelink = header_buf.Rx_NextPage; - if ((pagelink < first_rx_page) || (last_rx_page < pagelink)) { - /* Ouch... Forget it! Skip all and start afresh... */ - printk(KERN_WARNING "%s: Ring overrun? Restoring...\n", dev->name); - /* You win some, you lose some. And sometimes plenty... */ - adapter_init(dev); - netif_wake_queue(dev); - dev->stats.rx_over_errors++; - return 0; - } - - /* OK, this look good, so far. Let's see if it's consistent... */ - /* Let's compute the start of the next packet, based on where we are */ - pagelink = next_rx_page + - ((header_buf.Rx_ByteCount + (4 - 1 + 0x100)) >> 8); - - /* Are we going to wrap around the page counter? */ - if (pagelink > last_rx_page) - pagelink -= (last_rx_page - first_rx_page + 1); - - /* Is the _computed_ next page number equal to what the adapter says? */ - if (pagelink != header_buf.Rx_NextPage) { - /* Naah, we'll skip this packet. Probably bogus data as well */ - printk(KERN_WARNING "%s: Page link out of sync! Restoring...\n", dev->name); - next_rx_page = header_buf.Rx_NextPage; /* at least a try... */ - de620_send_command(dev, W_DUMMY); - de620_set_register(dev, W_NPRF, next_rx_page); - dev->stats.rx_over_errors++; - return 0; - } - next_rx_page = pagelink; - - size = header_buf.Rx_ByteCount - 4; - if ((size < RUNT) || (GIANT < size)) { - printk(KERN_WARNING "%s: Illegal packet size: %d!\n", dev->name, size); - } - else { /* Good packet? */ - skb = netdev_alloc_skb(dev, size + 2); - if (skb == NULL) { /* Yeah, but no place to put it... */ - printk(KERN_WARNING "%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size); - dev->stats.rx_dropped++; - } - else { /* Yep! Go get it! */ - skb_reserve(skb,2); /* Align */ - /* skb->data points to the start of sk_buff data area */ - buffer = skb_put(skb,size); - /* copy the packet into the buffer */ - de620_read_block(dev, buffer, size); - pr_debug("Read %d bytes\n", size); - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); /* deliver it "upstairs" */ - /* count all receives */ - dev->stats.rx_packets++; - dev->stats.rx_bytes += size; - } - } - - /* Let's peek ahead to see if we have read the last current packet */ - /* NOTE! We're _not_ checking the 'EMPTY'-flag! This seems better... */ - curr_page = de620_get_register(dev, R_CPR); - de620_set_register(dev, W_NPRF, next_rx_page); - pr_debug("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page); - - return next_rx_page != curr_page; /* That was slightly tricky... */ -} - -/********************************************* - * - * Reset the adapter to a known state - * - */ -static int adapter_init(struct net_device *dev) -{ - int i; - static int was_down; - - if ((nic_data.Model == 3) || (nic_data.Model == 0)) { /* CT */ - EIPRegister = NCTL0; - if (nic_data.Media != 1) - EIPRegister |= NIS0; /* not BNC */ - } - else if (nic_data.Model == 2) { /* UTP */ - EIPRegister = NCTL0 | NIS0; - } - - if (utp) - EIPRegister = NCTL0 | NIS0; - if (bnc) - EIPRegister = NCTL0; - - de620_send_command(dev, W_CR | RNOP | CLEAR); - de620_send_command(dev, W_CR | RNOP); - - de620_set_register(dev, W_SCR, SCR_DEF); - /* disable recv to wait init */ - de620_set_register(dev, W_TCR, RXOFF); - - /* Set the node ID in the adapter */ - for (i = 0; i < 6; ++i) { /* W_PARn = 0xaa + n */ - de620_set_register(dev, W_PAR0 + i, dev->dev_addr[i]); - } - - de620_set_register(dev, W_EIP, EIPRegister); - - next_rx_page = first_rx_page = DE620_RX_START_PAGE; - if (nic_data.RAM_Size) - last_rx_page = nic_data.RAM_Size - 1; - else /* 64k RAM */ - last_rx_page = 255; - - de620_set_register(dev, W_SPR, first_rx_page); /* Start Page Register*/ - de620_set_register(dev, W_EPR, last_rx_page); /* End Page Register */ - de620_set_register(dev, W_CPR, first_rx_page);/*Current Page Register*/ - de620_send_command(dev, W_NPR | first_rx_page); /* Next Page Register*/ - de620_send_command(dev, W_DUMMY); - de620_set_delay(dev); - - /* Final sanity check: Anybody out there? */ - /* Let's hope some bits from the statusregister make a good check */ -#define CHECK_MASK ( 0 | TXSUC | T16 | 0 | RXCRC | RXSHORT | 0 | 0 ) -#define CHECK_OK ( 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 ) - /* success: X 0 0 X 0 0 X X */ - /* ignore: EEDI RXGOOD COLS LNKS*/ - - if (((i = de620_get_register(dev, R_STS)) & CHECK_MASK) != CHECK_OK) { - printk(KERN_ERR "%s: Something has happened to the DE-620! Please check it" -#ifdef SHUTDOWN_WHEN_LOST - " and do a new ifconfig" -#endif - "! (%02x)\n", dev->name, i); -#ifdef SHUTDOWN_WHEN_LOST - /* Goodbye, cruel world... */ - dev->flags &= ~IFF_UP; - de620_close(dev); -#endif - was_down = 1; - return 1; /* failed */ - } - if (was_down) { - printk(KERN_WARNING "%s: Thanks, I feel much better now!\n", dev->name); - was_down = 0; - } - - /* All OK, go ahead... */ - de620_set_register(dev, W_TCR, TCR_DEF); - - return 0; /* all ok */ -} - -static const struct net_device_ops de620_netdev_ops = { - .ndo_open = de620_open, - .ndo_stop = de620_close, - .ndo_start_xmit = de620_start_xmit, - .ndo_tx_timeout = de620_timeout, - .ndo_set_rx_mode = de620_set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/****************************************************************************** - * - * Only start-up code below - * - */ -/**************************************** - * - * Check if there is a DE-620 connected - */ -struct net_device * __init de620_probe(int unit) -{ - byte checkbyte = 0xa5; - struct net_device *dev; - int err = -ENOMEM; - int i; - - dev = alloc_etherdev(0); - if (!dev) - goto out; - - spin_lock_init(&de620_lock); - - /* - * This is where the base_addr and irq gets set. - * Tunable at compile-time and insmod-time - */ - dev->base_addr = io; - dev->irq = irq; - - /* allow overriding parameters on command line */ - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - } - - pr_debug("%s", version); - - printk(KERN_INFO "D-Link DE-620 pocket adapter"); - - if (!request_region(dev->base_addr, 3, "de620")) { - printk(" io 0x%3lX, which is busy.\n", dev->base_addr); - err = -EBUSY; - goto out1; - } - - /* Initially, configure basic nibble mode, so we can read the EEPROM */ - NIC_Cmd = DEF_NIC_CMD; - de620_set_register(dev, W_EIP, EIPRegister); - - /* Anybody out there? */ - de620_set_register(dev, W_CPR, checkbyte); - checkbyte = de620_get_register(dev, R_CPR); - - if ((checkbyte != 0xa5) || (read_eeprom(dev) != 0)) { - printk(" not identified in the printer port\n"); - err = -ENODEV; - goto out2; - } - - /* else, got it! */ - dev->dev_addr[0] = nic_data.NodeID[0]; - for (i = 1; i < ETH_ALEN; i++) { - dev->dev_addr[i] = nic_data.NodeID[i]; - dev->broadcast[i] = 0xff; - } - - printk(", Ethernet Address: %pM", dev->dev_addr); - - printk(" (%dk RAM,", - (nic_data.RAM_Size) ? (nic_data.RAM_Size >> 2) : 64); - - if (nic_data.Media == 1) - printk(" BNC)\n"); - else - printk(" UTP)\n"); - - dev->netdev_ops = &de620_netdev_ops; - dev->watchdog_timeo = HZ*2; - - /* base_addr and irq are already set, see above! */ - - /* dump eeprom */ - pr_debug("\nEEPROM contents:\n" - "RAM_Size = 0x%02X\n" - "NodeID = %pM\n" - "Model = %d\n" - "Media = %d\n" - "SCR = 0x%02x\n", nic_data.RAM_Size, nic_data.NodeID, - nic_data.Model, nic_data.Media, nic_data.SCR); - - err = register_netdev(dev); - if (err) - goto out2; - return dev; - -out2: - release_region(dev->base_addr, 3); -out1: - free_netdev(dev); -out: - return ERR_PTR(err); -} - -/********************************** - * - * Read info from on-board EEPROM - * - * Note: Bitwise serial I/O to/from the EEPROM vi the status _register_! - */ -#define sendit(dev,data) de620_set_register(dev, W_EIP, data | EIPRegister); - -static unsigned short __init ReadAWord(struct net_device *dev, int from) -{ - unsigned short data; - int nbits; - - /* cs [__~~] SET SEND STATE */ - /* di [____] */ - /* sck [_~~_] */ - sendit(dev, 0); sendit(dev, 1); sendit(dev, 5); sendit(dev, 4); - - /* Send the 9-bit address from where we want to read the 16-bit word */ - for (nbits = 9; nbits > 0; --nbits, from <<= 1) { - if (from & 0x0100) { /* bit set? */ - /* cs [~~~~] SEND 1 */ - /* di [~~~~] */ - /* sck [_~~_] */ - sendit(dev, 6); sendit(dev, 7); sendit(dev, 7); sendit(dev, 6); - } - else { - /* cs [~~~~] SEND 0 */ - /* di [____] */ - /* sck [_~~_] */ - sendit(dev, 4); sendit(dev, 5); sendit(dev, 5); sendit(dev, 4); - } - } - - /* Shift in the 16-bit word. The bits appear serially in EEDI (=0x80) */ - for (data = 0, nbits = 16; nbits > 0; --nbits) { - /* cs [~~~~] SEND 0 */ - /* di [____] */ - /* sck [_~~_] */ - sendit(dev, 4); sendit(dev, 5); sendit(dev, 5); sendit(dev, 4); - data = (data << 1) | ((de620_get_register(dev, R_STS) & EEDI) >> 7); - } - /* cs [____] RESET SEND STATE */ - /* di [____] */ - /* sck [_~~_] */ - sendit(dev, 0); sendit(dev, 1); sendit(dev, 1); sendit(dev, 0); - - return data; -} - -static int __init read_eeprom(struct net_device *dev) -{ - unsigned short wrd; - - /* D-Link Ethernet addresses are in the series 00:80:c8:7X:XX:XX:XX */ - wrd = ReadAWord(dev, 0x1aa); /* bytes 0 + 1 of NodeID */ - if (!clone && (wrd != htons(0x0080))) /* Valid D-Link ether sequence? */ - return -1; /* Nope, not a DE-620 */ - nic_data.NodeID[0] = wrd & 0xff; - nic_data.NodeID[1] = wrd >> 8; - - wrd = ReadAWord(dev, 0x1ab); /* bytes 2 + 3 of NodeID */ - if (!clone && ((wrd & 0xff) != 0xc8)) /* Valid D-Link ether sequence? */ - return -1; /* Nope, not a DE-620 */ - nic_data.NodeID[2] = wrd & 0xff; - nic_data.NodeID[3] = wrd >> 8; - - wrd = ReadAWord(dev, 0x1ac); /* bytes 4 + 5 of NodeID */ - nic_data.NodeID[4] = wrd & 0xff; - nic_data.NodeID[5] = wrd >> 8; - - wrd = ReadAWord(dev, 0x1ad); /* RAM size in pages (256 bytes). 0 = 64k */ - nic_data.RAM_Size = (wrd >> 8); - - wrd = ReadAWord(dev, 0x1ae); /* hardware model (CT = 3) */ - nic_data.Model = (wrd & 0xff); - - wrd = ReadAWord(dev, 0x1af); /* media (indicates BNC/UTP) */ - nic_data.Media = (wrd & 0xff); - - wrd = ReadAWord(dev, 0x1a8); /* System Configuration Register */ - nic_data.SCR = (wrd >> 8); - - return 0; /* no errors */ -} - -/****************************************************************************** - * - * Loadable module skeleton - * - */ -#ifdef MODULE -static struct net_device *de620_dev; - -int __init init_module(void) -{ - de620_dev = de620_probe(-1); - if (IS_ERR(de620_dev)) - return PTR_ERR(de620_dev); - return 0; -} - -void cleanup_module(void) -{ - unregister_netdev(de620_dev); - release_region(de620_dev->base_addr, 3); - free_netdev(de620_dev); -} -#endif /* MODULE */ -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/dlink/de620.h b/drivers/net/ethernet/dlink/de620.h deleted file mode 100644 index e8d9a88..0000000 --- a/drivers/net/ethernet/dlink/de620.h +++ /dev/null @@ -1,117 +0,0 @@ -/********************************************************* - * * - * Definition of D-Link DE-620 Ethernet Pocket adapter * - * * - *********************************************************/ - -/* DE-620's CMD port Command */ -#define CS0 0x08 /* 1->0 command strobe */ -#define ICEN 0x04 /* 0=enable DL3520 host interface */ -#define DS0 0x02 /* 1->0 data strobe 0 */ -#define DS1 0x01 /* 1->0 data strobe 1 */ - -#define WDIR 0x20 /* general 0=read 1=write */ -#define RDIR 0x00 /* (not 100% confirm ) */ -#define PS2WDIR 0x00 /* ps/2 mode 1=read, 0=write */ -#define PS2RDIR 0x20 - -#define IRQEN 0x10 /* 1 = enable printer IRQ line */ -#define SELECTIN 0x08 /* 1 = select printer */ -#define INITP 0x04 /* 0 = initial printer */ -#define AUTOFEED 0x02 /* 1 = printer auto form feed */ -#define STROBE 0x01 /* 0->1 data strobe */ - -#define RESET 0x08 -#define NIS0 0x20 /* 0 = BNC, 1 = UTP */ -#define NCTL0 0x10 - -/* DE-620 DIC Command */ -#define W_DUMMY 0x00 /* DIC reserved command */ -#define W_CR 0x20 /* DIC write command register */ -#define W_NPR 0x40 /* DIC write Next Page Register */ -#define W_TBR 0x60 /* DIC write Tx Byte Count 1 reg */ -#define W_RSA 0x80 /* DIC write Remote Start Addr 1 */ - -/* DE-620's STAT port bits 7-4 */ -#define EMPTY 0x80 /* 1 = receive buffer empty */ -#define INTLEVEL 0x40 /* 1 = interrupt level is high */ -#define TXBF1 0x20 /* 1 = transmit buffer 1 is in use */ -#define TXBF0 0x10 /* 1 = transmit buffer 0 is in use */ -#define READY 0x08 /* 1 = h/w ready to accept cmd/data */ - -/* IDC 1 Command */ -#define W_RSA1 0xa0 /* write remote start address 1 */ -#define W_RSA0 0xa1 /* write remote start address 0 */ -#define W_NPRF 0xa2 /* write next page register NPR15-NPR8 */ -#define W_DFR 0xa3 /* write delay factor register */ -#define W_CPR 0xa4 /* write current page register */ -#define W_SPR 0xa5 /* write start page register */ -#define W_EPR 0xa6 /* write end page register */ -#define W_SCR 0xa7 /* write system configuration register */ -#define W_TCR 0xa8 /* write Transceiver Configuration reg */ -#define W_EIP 0xa9 /* write EEPM Interface port */ -#define W_PAR0 0xaa /* write physical address register 0 */ -#define W_PAR1 0xab /* write physical address register 1 */ -#define W_PAR2 0xac /* write physical address register 2 */ -#define W_PAR3 0xad /* write physical address register 3 */ -#define W_PAR4 0xae /* write physical address register 4 */ -#define W_PAR5 0xaf /* write physical address register 5 */ - -/* IDC 2 Command */ -#define R_STS 0xc0 /* read status register */ -#define R_CPR 0xc1 /* read current page register */ -#define R_BPR 0xc2 /* read boundary page register */ -#define R_TDR 0xc3 /* read time domain reflectometry reg */ - -/* STATUS Register */ -#define EEDI 0x80 /* EEPM DO pin */ -#define TXSUC 0x40 /* tx success */ -#define T16 0x20 /* tx fail 16 times */ -#define TS1 0x40 /* 0=Tx success, 1=T16 */ -#define TS0 0x20 /* 0=Tx success, 1=T16 */ -#define RXGOOD 0x10 /* rx a good packet */ -#define RXCRC 0x08 /* rx a CRC error packet */ -#define RXSHORT 0x04 /* rx a short packet */ -#define COLS 0x02 /* coaxial collision status */ -#define LNKS 0x01 /* UTP link status */ - -/* Command Register */ -#define CLEAR 0x10 /* reset part of hardware */ -#define NOPER 0x08 /* No Operation */ -#define RNOP 0x08 -#define RRA 0x06 /* After RR then auto-advance NPR & BPR(=NPR-1) */ -#define RRN 0x04 /* Normal Remote Read mode */ -#define RW1 0x02 /* Remote Write tx buffer 1 ( page 6 - 11 ) */ -#define RW0 0x00 /* Remote Write tx buffer 0 ( page 0 - 5 ) */ -#define TXEN 0x01 /* 0->1 tx enable */ - -/* System Configuration Register */ -#define TESTON 0x80 /* test host data transfer reliability */ -#define SLEEP 0x40 /* sleep mode */ -#if 0 -#define FASTMODE 0x04 /* fast mode for intel 82360SL fast mode */ -#define BYTEMODE 0x02 /* byte mode */ -#else -#define FASTMODE 0x20 /* fast mode for intel 82360SL fast mode */ -#define BYTEMODE 0x10 /* byte mode */ -#endif -#define NIBBLEMODE 0x00 /* nibble mode */ -#define IRQINV 0x08 /* turn off IRQ line inverter */ -#define IRQNML 0x00 /* turn on IRQ line inverter */ -#define INTON 0x04 -#define AUTOFFSET 0x02 /* auto shift address to TPR+12 */ -#define AUTOTX 0x01 /* auto tx when leave RW mode */ - -/* Transceiver Configuration Register */ -#define JABBER 0x80 /* generate jabber condition */ -#define TXSUCINT 0x40 /* enable tx success interrupt */ -#define T16INT 0x20 /* enable T16 interrupt */ -#define RXERRPKT 0x10 /* accept CRC error or short packet */ -#define EXTERNALB2 0x0C /* external loopback 2 */ -#define EXTERNALB1 0x08 /* external loopback 1 */ -#define INTERNALB 0x04 /* internal loopback */ -#define NMLOPERATE 0x00 /* normal operation */ -#define RXPBM 0x03 /* rx physical, broadcast, multicast */ -#define RXPB 0x02 /* rx physical, broadcast */ -#define RXALL 0x01 /* rx all packet */ -#define RXOFF 0x00 /* rx disable */ diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig index aca1568..c6a8762 100644 --- a/drivers/net/ethernet/fujitsu/Kconfig +++ b/drivers/net/ethernet/fujitsu/Kconfig @@ -17,18 +17,6 @@ config NET_VENDOR_FUJITSU if NET_VENDOR_FUJITSU -config AT1700 - tristate "AT1700/1720 support (EXPERIMENTAL)" - depends on ISA && EXPERIMENTAL - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called at1700. - config PCMCIA_FMVJ18X tristate "Fujitsu FMV-J18x PCMCIA support" depends on PCMCIA @@ -40,15 +28,4 @@ config PCMCIA_FMVJ18X To compile this driver as a module, choose M here: the module will be called fmvj18x_cs. If unsure, say N. -config ETH16I - tristate "ICL EtherTeam 16i/32 support" - depends on ISA - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called eth16i. - endif # NET_VENDOR_FUJITSU diff --git a/drivers/net/ethernet/fujitsu/Makefile b/drivers/net/ethernet/fujitsu/Makefile index 2730ae6..21561fd 100644 --- a/drivers/net/ethernet/fujitsu/Makefile +++ b/drivers/net/ethernet/fujitsu/Makefile @@ -2,6 +2,4 @@ # Makefile for the Fujitsu network device drivers. # -obj-$(CONFIG_AT1700) += at1700.o -obj-$(CONFIG_ETH16I) += eth16i.o obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o diff --git a/drivers/net/ethernet/fujitsu/at1700.c b/drivers/net/ethernet/fujitsu/at1700.c deleted file mode 100644 index 4b80dc4..0000000 --- a/drivers/net/ethernet/fujitsu/at1700.c +++ /dev/null @@ -1,791 +0,0 @@ -/* at1700.c: A network device driver for the Allied Telesis AT1700. - - Written 1993-98 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - This is a device driver for the Allied Telesis AT1700, and - Fujitsu FMV-181/182/181A/182A/183/184/183A/184A, which are - straight-forward Fujitsu MB86965 implementations. - - Modification for Fujitsu FMV-18X cards is done by Yutaka Tamiya - (tamy@flab.fujitsu.co.jp). - - Sources: - The Fujitsu MB86965 datasheet. - - After the initial version of this driver was written Gerry Sawkins of - ATI provided their EEPROM configuration code header file. - Thanks to NIIBE Yutaka <gniibe@mri.co.jp> for bug fixes. - - MCA bus (AT1720) support (now deleted) by Rene Schmit <rene@bss.lu> - - Bugs: - The MB86965 has a design flaw that makes all probes unreliable. Not - only is it difficult to detect, it also moves around in I/O space in - response to inb()s from other device probes! -*/ - -#include <linux/errno.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/skbuff.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/crc32.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/dma.h> - -static char version[] __initdata = - "at1700.c:v1.16 9/11/06 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - -#define DRV_NAME "at1700" - -/* Tunable parameters. */ - -/* When to switch from the 64-entry multicast filter to Rx-all-multicast. */ -#define MC_FILTERBREAK 64 - -/* These unusual address orders are used to verify the CONFIG register. */ - -static int fmv18x_probe_list[] __initdata = { - 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0 -}; - -/* - * ISA - */ - -static unsigned at1700_probe_list[] __initdata = { - 0x260, 0x280, 0x2a0, 0x240, 0x340, 0x320, 0x380, 0x300, 0 -}; - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 1 -#endif -static unsigned int net_debug = NET_DEBUG; - -typedef unsigned char uchar; - -/* Information that need to be kept for each board. */ -struct net_local { - spinlock_t lock; - unsigned char mc_filter[8]; - uint jumpered:1; /* Set iff the board has jumper config. */ - uint tx_started:1; /* Packets are on the Tx queue. */ - uint tx_queue_ready:1; /* Tx queue is ready to be sent. */ - uint rx_started:1; /* Packets are Rxing. */ - uchar tx_queue; /* Number of packet on the Tx queue. */ - ushort tx_queue_len; /* Current length of the Tx queue. */ -}; - - -/* Offsets from the base address. */ -#define STATUS 0 -#define TX_STATUS 0 -#define RX_STATUS 1 -#define TX_INTR 2 /* Bit-mapped interrupt enable registers. */ -#define RX_INTR 3 -#define TX_MODE 4 -#define RX_MODE 5 -#define CONFIG_0 6 /* Misc. configuration settings. */ -#define CONFIG_1 7 -/* Run-time register bank 2 definitions. */ -#define DATAPORT 8 /* Word-wide DMA or programmed-I/O dataport. */ -#define TX_START 10 -#define COL16CNTL 11 /* Control Reg for 16 collisions */ -#define MODE13 13 -#define RX_CTRL 14 -/* Configuration registers only on the '865A/B chips. */ -#define EEPROM_Ctrl 16 -#define EEPROM_Data 17 -#define CARDSTATUS 16 /* FMV-18x Card Status */ -#define CARDSTATUS1 17 /* FMV-18x Card Status */ -#define IOCONFIG 18 /* Either read the jumper, or move the I/O. */ -#define IOCONFIG1 19 -#define SAPROM 20 /* The station address PROM, if no EEPROM. */ -#define MODE24 24 -#define RESET 31 /* Write to reset some parts of the chip. */ -#define AT1700_IO_EXTENT 32 -#define PORT_OFFSET(o) (o) - - -#define TX_TIMEOUT (HZ/10) - - -/* Index to functions, as function prototypes. */ - -static int at1700_probe1(struct net_device *dev, int ioaddr); -static int read_eeprom(long ioaddr, int location); -static int net_open(struct net_device *dev); -static netdev_tx_t net_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t net_interrupt(int irq, void *dev_id); -static void net_rx(struct net_device *dev); -static int net_close(struct net_device *dev); -static void set_rx_mode(struct net_device *dev); -static void net_tx_timeout (struct net_device *dev); - - -/* Check for a network adaptor of this type, and return '0' iff one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - If dev->base_addr == 2, allocate space for the device and return success - (detachable devices only). - */ - -static int io = 0x260; - -static int irq; - -static void cleanup_card(struct net_device *dev) -{ - free_irq(dev->irq, NULL); - release_region(dev->base_addr, AT1700_IO_EXTENT); -} - -struct net_device * __init at1700_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - unsigned *port; - int err = 0; - - if (!dev) - return ERR_PTR(-ENODEV); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - } else { - dev->base_addr = io; - dev->irq = irq; - } - - if (io > 0x1ff) { /* Check a single specified location. */ - err = at1700_probe1(dev, io); - } else if (io != 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { - for (port = at1700_probe_list; *port; port++) { - if (at1700_probe1(dev, *port) == 0) - break; - dev->irq = irq; - } - if (!*port) - err = -ENODEV; - } - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - cleanup_card(dev); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static const struct net_device_ops at1700_netdev_ops = { - .ndo_open = net_open, - .ndo_stop = net_close, - .ndo_start_xmit = net_send_packet, - .ndo_set_rx_mode = set_rx_mode, - .ndo_tx_timeout = net_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/* The Fujitsu datasheet suggests that the NIC be probed for by checking its - "signature", the default bit pattern after a reset. This *doesn't* work -- - there is no way to reset the bus interface without a complete power-cycle! - - It turns out that ATI came to the same conclusion I did: the only thing - that can be done is checking a few bits and then diving right into an - EEPROM read. */ - -static int __init at1700_probe1(struct net_device *dev, int ioaddr) -{ - static const char fmv_irqmap[4] = {3, 7, 10, 15}; - static const char fmv_irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15}; - static const char at1700_irqmap[8] = {3, 4, 5, 9, 10, 11, 14, 15}; - unsigned int i, irq, is_fmv18x = 0, is_at1700 = 0; - int ret = -ENODEV; - struct net_local *lp = netdev_priv(dev); - - if (!request_region(ioaddr, AT1700_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - /* Resetting the chip doesn't reset the ISA interface, so don't bother. - That means we have to be careful with the register values we probe - for. - */ -#ifdef notdef - printk("at1700 probe at %#x, eeprom is %4.4x %4.4x %4.4x ctrl %4.4x.\n", - ioaddr, read_eeprom(ioaddr, 4), read_eeprom(ioaddr, 5), - read_eeprom(ioaddr, 6), inw(ioaddr + EEPROM_Ctrl)); -#endif - /* We must check for the EEPROM-config boards first, else accessing - IOCONFIG0 will move the board! */ - if (at1700_probe_list[inb(ioaddr + IOCONFIG1) & 0x07] == ioaddr && - read_eeprom(ioaddr, 4) == 0x0000 && - (read_eeprom(ioaddr, 5) & 0xff00) == 0xF400) - is_at1700 = 1; - else if (inb(ioaddr + SAPROM ) == 0x00 && - inb(ioaddr + SAPROM + 1) == 0x00 && - inb(ioaddr + SAPROM + 2) == 0x0e) - is_fmv18x = 1; - else { - goto err_out; - } - - /* Reset the internal state machines. */ - outb(0, ioaddr + RESET); - - if (is_at1700) { - irq = at1700_irqmap[(read_eeprom(ioaddr, 12)&0x04) - | (read_eeprom(ioaddr, 0)>>14)]; - } else { - /* Check PnP mode for FMV-183/184/183A/184A. */ - /* This PnP routine is very poor. IO and IRQ should be known. */ - if (inb(ioaddr + CARDSTATUS1) & 0x20) { - irq = dev->irq; - for (i = 0; i < 8; i++) { - if (irq == fmv_irqmap_pnp[i]) - break; - } - if (i == 8) { - goto err_out; - } - } else { - if (fmv18x_probe_list[inb(ioaddr + IOCONFIG) & 0x07] != ioaddr) - goto err_out; - irq = fmv_irqmap[(inb(ioaddr + IOCONFIG)>>6) & 0x03]; - } - } - - printk("%s: %s found at %#3x, IRQ %d, address ", dev->name, - is_at1700 ? "AT1700" : "FMV-18X", ioaddr, irq); - - dev->base_addr = ioaddr; - dev->irq = irq; - - if (is_at1700) { - for(i = 0; i < 3; i++) { - unsigned short eeprom_val = read_eeprom(ioaddr, 4+i); - ((unsigned short *)dev->dev_addr)[i] = ntohs(eeprom_val); - } - } else { - for(i = 0; i < 6; i++) { - unsigned char val = inb(ioaddr + SAPROM + i); - dev->dev_addr[i] = val; - } - } - printk("%pM", dev->dev_addr); - - /* The EEPROM word 12 bit 0x0400 means use regular 100 ohm 10baseT signals, - rather than 150 ohm shielded twisted pair compensation. - 0x0000 == auto-sense the interface - 0x0800 == use TP interface - 0x1800 == use coax interface - */ - { - const char *porttype[] = {"auto-sense", "10baseT", "auto-sense", "10base2"}; - if (is_at1700) { - ushort setup_value = read_eeprom(ioaddr, 12); - dev->if_port = setup_value >> 8; - } else { - ushort setup_value = inb(ioaddr + CARDSTATUS); - switch (setup_value & 0x07) { - case 0x01: /* 10base5 */ - case 0x02: /* 10base2 */ - dev->if_port = 0x18; break; - case 0x04: /* 10baseT */ - dev->if_port = 0x08; break; - default: /* auto-sense */ - dev->if_port = 0x00; break; - } - } - printk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]); - } - - /* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit - bus access, two 4K Tx queues, and disabled Tx and Rx. */ - outb(0xda, ioaddr + CONFIG_0); - - /* Set the station address in bank zero. */ - outb(0x00, ioaddr + CONFIG_1); - for (i = 0; i < 6; i++) - outb(dev->dev_addr[i], ioaddr + PORT_OFFSET(8 + i)); - - /* Switch to bank 1 and set the multicast table to accept none. */ - outb(0x04, ioaddr + CONFIG_1); - for (i = 0; i < 8; i++) - outb(0x00, ioaddr + PORT_OFFSET(8 + i)); - - - /* Switch to bank 2 */ - /* Lock our I/O address, and set manual processing mode for 16 collisions. */ - outb(0x08, ioaddr + CONFIG_1); - outb(dev->if_port, ioaddr + MODE13); - outb(0x00, ioaddr + COL16CNTL); - - if (net_debug) - printk(version); - - dev->netdev_ops = &at1700_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - - spin_lock_init(&lp->lock); - - lp->jumpered = is_fmv18x; - /* Snarf the interrupt vector now. */ - ret = request_irq(irq, net_interrupt, 0, DRV_NAME, dev); - if (ret) { - printk(KERN_ERR "AT1700 at %#3x is unusable due to a " - "conflict on IRQ %d.\n", - ioaddr, irq); - goto err_out; - } - - return 0; - -err_out: - release_region(ioaddr, AT1700_IO_EXTENT); - return ret; -} - - -/* EEPROM_Ctrl bits. */ -#define EE_SHIFT_CLK 0x40 /* EEPROM shift clock, in reg. 16. */ -#define EE_CS 0x20 /* EEPROM chip select, in reg. 16. */ -#define EE_DATA_WRITE 0x80 /* EEPROM chip data in, in reg. 17. */ -#define EE_DATA_READ 0x80 /* EEPROM chip data out, in reg. 17. */ - -/* The EEPROM commands include the alway-set leading bit. */ -#define EE_WRITE_CMD (5 << 6) -#define EE_READ_CMD (6 << 6) -#define EE_ERASE_CMD (7 << 6) - -static int __init read_eeprom(long ioaddr, int location) -{ - int i; - unsigned short retval = 0; - long ee_addr = ioaddr + EEPROM_Ctrl; - long ee_daddr = ioaddr + EEPROM_Data; - int read_cmd = location | EE_READ_CMD; - - /* Shift the read command bits out. */ - for (i = 9; i >= 0; i--) { - short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; - outb(EE_CS, ee_addr); - outb(dataval, ee_daddr); - outb(EE_CS | EE_SHIFT_CLK, ee_addr); /* EEPROM clock tick. */ - } - outb(EE_DATA_WRITE, ee_daddr); - for (i = 16; i > 0; i--) { - outb(EE_CS, ee_addr); - outb(EE_CS | EE_SHIFT_CLK, ee_addr); - retval = (retval << 1) | ((inb(ee_daddr) & EE_DATA_READ) ? 1 : 0); - } - - /* Terminate the EEPROM access. */ - outb(EE_CS, ee_addr); - outb(EE_SHIFT_CLK, ee_addr); - outb(0, ee_addr); - return retval; -} - - - -static int net_open(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - /* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit - bus access, and two 4K Tx queues. */ - outb(0x5a, ioaddr + CONFIG_0); - - /* Powerup, switch to register bank 2, and enable the Rx and Tx. */ - outb(0xe8, ioaddr + CONFIG_1); - - lp->tx_started = 0; - lp->tx_queue_ready = 1; - lp->rx_started = 0; - lp->tx_queue = 0; - lp->tx_queue_len = 0; - - /* Turn on hardware Tx and Rx interrupts. */ - outb(0x82, ioaddr + TX_INTR); - outb(0x81, ioaddr + RX_INTR); - - /* Enable the IRQ on boards of fmv18x it is feasible. */ - if (lp->jumpered) { - outb(0x80, ioaddr + IOCONFIG1); - } - - netif_start_queue(dev); - return 0; -} - -static void net_tx_timeout (struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - printk ("%s: transmit timed out with status %04x, %s?\n", dev->name, - inw (ioaddr + STATUS), inb (ioaddr + TX_STATUS) & 0x80 - ? "IRQ conflict" : "network cable problem"); - printk ("%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n", - dev->name, inw(ioaddr + TX_STATUS), inw(ioaddr + TX_INTR), inw(ioaddr + TX_MODE), - inw(ioaddr + CONFIG_0), inw(ioaddr + DATAPORT), inw(ioaddr + TX_START), - inw(ioaddr + MODE13 - 1), inw(ioaddr + RX_CTRL)); - dev->stats.tx_errors++; - /* ToDo: We should try to restart the adaptor... */ - outw(0xffff, ioaddr + MODE24); - outw (0xffff, ioaddr + TX_STATUS); - outb (0x5a, ioaddr + CONFIG_0); - outb (0xe8, ioaddr + CONFIG_1); - outw (0x8182, ioaddr + TX_INTR); - outb (0x00, ioaddr + TX_START); - outb (0x03, ioaddr + COL16CNTL); - - dev->trans_start = jiffies; /* prevent tx timeout */ - - lp->tx_started = 0; - lp->tx_queue_ready = 1; - lp->rx_started = 0; - lp->tx_queue = 0; - lp->tx_queue_len = 0; - - netif_wake_queue(dev); -} - - -static netdev_tx_t net_send_packet (struct sk_buff *skb, - struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; - short len = skb->len; - unsigned char *buf = skb->data; - static u8 pad[ETH_ZLEN]; - - netif_stop_queue (dev); - - /* We may not start transmitting unless we finish transferring - a packet into the Tx queue. During executing the following - codes we possibly catch a Tx interrupt. Thus we flag off - tx_queue_ready, so that we prevent the interrupt routine - (net_interrupt) to start transmitting. */ - lp->tx_queue_ready = 0; - { - outw (length, ioaddr + DATAPORT); - /* Packet data */ - outsw (ioaddr + DATAPORT, buf, len >> 1); - /* Check for dribble byte */ - if (len & 1) { - outw(skb->data[skb->len-1], ioaddr + DATAPORT); - len++; - } - /* Check for packet padding */ - if (length != skb->len) - outsw(ioaddr + DATAPORT, pad, (length - len + 1) >> 1); - - lp->tx_queue++; - lp->tx_queue_len += length + 2; - } - lp->tx_queue_ready = 1; - - if (lp->tx_started == 0) { - /* If the Tx is idle, always trigger a transmit. */ - outb (0x80 | lp->tx_queue, ioaddr + TX_START); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - lp->tx_started = 1; - netif_start_queue (dev); - } else if (lp->tx_queue_len < 4096 - 1502) - /* Yes, there is room for one more packet. */ - netif_start_queue (dev); - dev_kfree_skb (skb); - - return NETDEV_TX_OK; -} - -/* The typical workload of the driver: - Handle the network interface interrupts. */ -static irqreturn_t net_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr, status; - int handled = 0; - - if (dev == NULL) { - printk ("at1700_interrupt(): irq %d for unknown device.\n", irq); - return IRQ_NONE; - } - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - - spin_lock (&lp->lock); - - status = inw(ioaddr + TX_STATUS); - outw(status, ioaddr + TX_STATUS); - - if (net_debug > 4) - printk("%s: Interrupt with status %04x.\n", dev->name, status); - if (lp->rx_started == 0 && - (status & 0xff00 || (inb(ioaddr + RX_MODE) & 0x40) == 0)) { - /* Got a packet(s). - We cannot execute net_rx more than once at the same time for - the same device. During executing net_rx, we possibly catch a - Tx interrupt. Thus we flag on rx_started, so that we prevent - the interrupt routine (net_interrupt) to dive into net_rx - again. */ - handled = 1; - lp->rx_started = 1; - outb(0x00, ioaddr + RX_INTR); /* Disable RX intr. */ - net_rx(dev); - outb(0x81, ioaddr + RX_INTR); /* Enable RX intr. */ - lp->rx_started = 0; - } - if (status & 0x00ff) { - handled = 1; - if (status & 0x02) { - /* More than 16 collisions occurred */ - if (net_debug > 4) - printk("%s: 16 Collision occur during Txing.\n", dev->name); - /* Cancel sending a packet. */ - outb(0x03, ioaddr + COL16CNTL); - dev->stats.collisions++; - } - if (status & 0x82) { - dev->stats.tx_packets++; - /* The Tx queue has any packets and is not being - transferred a packet from the host, start - transmitting. */ - if (lp->tx_queue && lp->tx_queue_ready) { - outb(0x80 | lp->tx_queue, ioaddr + TX_START); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - dev->trans_start = jiffies; - netif_wake_queue (dev); - } else { - lp->tx_started = 0; - netif_wake_queue (dev); - } - } - } - - spin_unlock (&lp->lock); - return IRQ_RETVAL(handled); -} - -/* We have a good packet(s), get it/them out of the buffers. */ -static void -net_rx(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - int boguscount = 5; - - while ((inb(ioaddr + RX_MODE) & 0x40) == 0) { - ushort status = inw(ioaddr + DATAPORT); - ushort pkt_len = inw(ioaddr + DATAPORT); - - if (net_debug > 4) - printk("%s: Rxing packet mode %02x status %04x.\n", - dev->name, inb(ioaddr + RX_MODE), status); -#ifndef final_version - if (status == 0) { - outb(0x05, ioaddr + RX_CTRL); - break; - } -#endif - - if ((status & 0xF0) != 0x20) { /* There was an error. */ - dev->stats.rx_errors++; - if (status & 0x08) dev->stats.rx_length_errors++; - if (status & 0x04) dev->stats.rx_frame_errors++; - if (status & 0x02) dev->stats.rx_crc_errors++; - if (status & 0x01) dev->stats.rx_over_errors++; - } else { - /* Malloc up new buffer. */ - struct sk_buff *skb; - - if (pkt_len > 1550) { - printk("%s: The AT1700 claimed a very large packet, size %d.\n", - dev->name, pkt_len); - /* Prime the FIFO and then flush the packet. */ - inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT); - outb(0x05, ioaddr + RX_CTRL); - dev->stats.rx_errors++; - break; - } - skb = netdev_alloc_skb(dev, pkt_len + 3); - if (skb == NULL) { - printk("%s: Memory squeeze, dropping packet (len %d).\n", - dev->name, pkt_len); - /* Prime the FIFO and then flush the packet. */ - inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT); - outb(0x05, ioaddr + RX_CTRL); - dev->stats.rx_dropped++; - break; - } - skb_reserve(skb,2); - - insw(ioaddr + DATAPORT, skb_put(skb,pkt_len), (pkt_len + 1) >> 1); - skb->protocol=eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - if (--boguscount <= 0) - break; - } - - /* If any worth-while packets have been received, dev_rint() - has done a mark_bh(NET_BH) for us and will work on them - when we get to the bottom-half routine. */ - { - int i; - for (i = 0; i < 20; i++) { - if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40) - break; - inw(ioaddr + DATAPORT); /* dummy status read */ - outb(0x05, ioaddr + RX_CTRL); - } - - if (net_debug > 5) - printk("%s: Exint Rx packet with mode %02x after %d ticks.\n", - dev->name, inb(ioaddr + RX_MODE), i); - } -} - -/* The inverse routine to net_open(). */ -static int net_close(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - netif_stop_queue(dev); - - /* Set configuration register 0 to disable Tx and Rx. */ - outb(0xda, ioaddr + CONFIG_0); - - /* No statistic counters on the chip to update. */ - - /* Disable the IRQ on boards of fmv18x where it is feasible. */ - if (lp->jumpered) - outb(0x00, ioaddr + IOCONFIG1); - - /* Power-down the chip. Green, green, green! */ - outb(0x00, ioaddr + CONFIG_1); - return 0; -} - -/* - Set the multicast/promiscuous mode for this adaptor. -*/ - -static void -set_rx_mode(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - struct net_local *lp = netdev_priv(dev); - unsigned char mc_filter[8]; /* Multicast hash filter */ - unsigned long flags; - - if (dev->flags & IFF_PROMISC) { - memset(mc_filter, 0xff, sizeof(mc_filter)); - outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */ - } else if (netdev_mc_count(dev) > MC_FILTERBREAK || - (dev->flags & IFF_ALLMULTI)) { - /* Too many to filter perfectly -- accept all multicasts. */ - memset(mc_filter, 0xff, sizeof(mc_filter)); - outb(2, ioaddr + RX_MODE); /* Use normal mode. */ - } else if (netdev_mc_empty(dev)) { - memset(mc_filter, 0x00, sizeof(mc_filter)); - outb(1, ioaddr + RX_MODE); /* Ignore almost all multicasts. */ - } else { - struct netdev_hw_addr *ha; - - memset(mc_filter, 0, sizeof(mc_filter)); - netdev_for_each_mc_addr(ha, dev) { - unsigned int bit = - ether_crc_le(ETH_ALEN, ha->addr) >> 26; - mc_filter[bit >> 3] |= (1 << bit); - } - outb(0x02, ioaddr + RX_MODE); /* Use normal mode. */ - } - - spin_lock_irqsave (&lp->lock, flags); - if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) { - int i; - int saved_bank = inw(ioaddr + CONFIG_0); - /* Switch to bank 1 and set the multicast table. */ - outw((saved_bank & ~0x0C00) | 0x0480, ioaddr + CONFIG_0); - for (i = 0; i < 8; i++) - outb(mc_filter[i], ioaddr + PORT_OFFSET(8 + i)); - memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter)); - outw(saved_bank, ioaddr + CONFIG_0); - } - spin_unlock_irqrestore (&lp->lock, flags); -} - -#ifdef MODULE -static struct net_device *dev_at1700; - -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(net_debug, int, 0); -MODULE_PARM_DESC(io, "AT1700/FMV18X I/O base address"); -MODULE_PARM_DESC(irq, "AT1700/FMV18X IRQ number"); -MODULE_PARM_DESC(net_debug, "AT1700/FMV18X debug level (0-6)"); - -static int __init at1700_module_init(void) -{ - if (io == 0) - printk("at1700: You should not use auto-probing with insmod!\n"); - dev_at1700 = at1700_probe(-1); - if (IS_ERR(dev_at1700)) - return PTR_ERR(dev_at1700); - return 0; -} - -static void __exit at1700_module_exit(void) -{ - unregister_netdev(dev_at1700); - cleanup_card(dev_at1700); - free_netdev(dev_at1700); -} -module_init(at1700_module_init); -module_exit(at1700_module_exit); -#endif /* MODULE */ -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/fujitsu/eth16i.c b/drivers/net/ethernet/fujitsu/eth16i.c deleted file mode 100644 index a992d1f..0000000 --- a/drivers/net/ethernet/fujitsu/eth16i.c +++ /dev/null @@ -1,1483 +0,0 @@ -/* eth16i.c An ICL EtherTeam 16i and 32 EISA ethernet driver for Linux - - Written 1994-1999 by Mika Kuoppala - - Copyright (C) 1994-1999 by Mika Kuoppala - Based on skeleton.c and heavily on at1700.c by Donald Becker - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as miku@iki.fi - - This driver supports following cards : - - ICL EtherTeam 16i - - ICL EtherTeam 32 EISA - (Uses true 32 bit transfers rather than 16i compatibility mode) - - Example Module usage: - insmod eth16i.o io=0x2a0 mediatype=bnc - - mediatype can be one of the following: bnc,tp,dix,auto,eprom - - 'auto' will try to autoprobe mediatype. - 'eprom' will use whatever type defined in eprom. - - I have benchmarked driver with PII/300Mhz as a ftp client - and 486/33Mhz as a ftp server. Top speed was 1128.37 kilobytes/sec. - - Sources: - - skeleton.c a sample network driver core for linux, - written by Donald Becker <becker@scyld.com> - - at1700.c a driver for Allied Telesis AT1700, written - by Donald Becker. - - e16iSRV.asm a Netware 3.X Server Driver for ICL EtherTeam16i - written by Markku Viima - - The Fujitsu MB86965 databook. - - Author thanks following persons due to their valueble assistance: - Markku Viima (ICL) - Ari Valve (ICL) - Donald Becker - Kurt Huwig <kurt@huwig.de> - - Revision history: - - Version Date Description - - 0.01 15.12-94 Initial version (card detection) - 0.02 23.01-95 Interrupt is now hooked correctly - 0.03 01.02-95 Rewrote initialization part - 0.04 07.02-95 Base skeleton done... - Made a few changes to signature checking - to make it a bit reliable. - - fixed bug in tx_buf mapping - - fixed bug in initialization (DLC_EN - wasn't enabled when initialization - was done.) - 0.05 08.02-95 If there were more than one packet to send, - transmit was jammed due to invalid - register write...now fixed - 0.06 19.02-95 Rewrote interrupt handling - 0.07 13.04-95 Wrote EEPROM read routines - Card configuration now set according to - data read from EEPROM - 0.08 23.06-95 Wrote part that tries to probe used interface - port if AUTO is selected - - 0.09 01.09-95 Added module support - - 0.10 04.09-95 Fixed receive packet allocation to work - with kernels > 1.3.x - - 0.20 20.09-95 Added support for EtherTeam32 EISA - - 0.21 17.10-95 Removed the unnecessary extern - init_etherdev() declaration. Some - other cleanups. - - 0.22 22.02-96 Receive buffer was not flushed - correctly when faulty packet was - received. Now fixed. - - 0.23 26.02-96 Made resetting the adapter - more reliable. - - 0.24 27.02-96 Rewrote faulty packet handling in eth16i_rx - - 0.25 22.05-96 kfree() was missing from cleanup_module. - - 0.26 11.06-96 Sometimes card was not found by - check_signature(). Now made more reliable. - - 0.27 23.06-96 Oops. 16 consecutive collisions halted - adapter. Now will try to retransmit - MAX_COL_16 times before finally giving up. - - 0.28 28.10-97 Added dev_id parameter (NULL) for free_irq - - 0.29 29.10-97 Multiple card support for module users - - 0.30 30.10-97 Fixed irq allocation bug. - (request_irq moved from probe to open) - - 0.30a 21.08-98 Card detection made more relaxed. Driver - had problems with some TCP/IP-PROM boots - to find the card. Suggested by - Kurt Huwig <kurt@huwig.de> - - 0.31 28.08-98 Media interface port can now be selected - with module parameters or kernel - boot parameters. - - 0.32 31.08-98 IRQ was never freed if open/close - pair wasn't called. Now fixed. - - 0.33 10.09-98 When eth16i_open() was called after - eth16i_close() chip never recovered. - Now more shallow reset is made on - close. - - 0.34 29.06-99 Fixed one bad #ifdef. - Changed ioaddr -> io for consistency - - 0.35 01.07-99 transmit,-receive bytes were never - updated in stats. - - Bugs: - In some cases the media interface autoprobing code doesn't find - the correct interface type. In this case you can - manually choose the interface type in DOS with E16IC.EXE which is - configuration software for EtherTeam16i and EtherTeam32 cards. - This is also true for IRQ setting. You cannot use module - parameter to configure IRQ of the card (yet). - - To do: - - Real multicast support - - Rewrite the media interface autoprobing code. Its _horrible_ ! - - Possibly merge all the MB86965 specific code to external - module for use by eth16.c and Donald's at1700.c - - IRQ configuration with module parameter. I will do - this when i will get enough info about setting - irq without configuration utility. -*/ - -static char *version = - "eth16i.c: v0.35 01-Jul-1999 Mika Kuoppala (miku@iki.fi)\n"; - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/bitops.h> -#include <linux/jiffies.h> -#include <linux/io.h> - -#include <asm/dma.h> - - - -/* Few macros */ -#define BITSET(ioaddr, bnum) ((outb(((inb(ioaddr)) | (bnum)), ioaddr))) -#define BITCLR(ioaddr, bnum) ((outb(((inb(ioaddr)) & (~(bnum))), ioaddr))) - -/* This is the I/O address space for Etherteam 16i adapter. */ -#define ETH16I_IO_EXTENT 32 - -/* Ticks before deciding that transmit has timed out */ -#define TX_TIMEOUT (400*HZ/1000) - -/* Maximum loop count when receiving packets */ -#define MAX_RX_LOOP 20 - -/* Some interrupt masks */ -#define ETH16I_INTR_ON 0xef8a /* Higher is receive mask */ -#define ETH16I_INTR_OFF 0x0000 - -/* Buffers header status byte meanings */ -#define PKT_GOOD BIT(5) -#define PKT_GOOD_RMT BIT(4) -#define PKT_SHORT BIT(3) -#define PKT_ALIGN_ERR BIT(2) -#define PKT_CRC_ERR BIT(1) -#define PKT_RX_BUF_OVERFLOW BIT(0) - -/* Transmit status register (DLCR0) */ -#define TX_STATUS_REG 0 -#define TX_DONE BIT(7) -#define NET_BUSY BIT(6) -#define TX_PKT_RCD BIT(5) -#define CR_LOST BIT(4) -#define TX_JABBER_ERR BIT(3) -#define COLLISION BIT(2) -#define COLLISIONS_16 BIT(1) - -/* Receive status register (DLCR1) */ -#define RX_STATUS_REG 1 -#define RX_PKT BIT(7) /* Packet received */ -#define BUS_RD_ERR BIT(6) -#define SHORT_PKT_ERR BIT(3) -#define ALIGN_ERR BIT(2) -#define CRC_ERR BIT(1) -#define RX_BUF_OVERFLOW BIT(0) - -/* Transmit Interrupt Enable Register (DLCR2) */ -#define TX_INTR_REG 2 -#define TX_INTR_DONE BIT(7) -#define TX_INTR_COL BIT(2) -#define TX_INTR_16_COL BIT(1) - -/* Receive Interrupt Enable Register (DLCR3) */ -#define RX_INTR_REG 3 -#define RX_INTR_RECEIVE BIT(7) -#define RX_INTR_SHORT_PKT BIT(3) -#define RX_INTR_CRC_ERR BIT(1) -#define RX_INTR_BUF_OVERFLOW BIT(0) - -/* Transmit Mode Register (DLCR4) */ -#define TRANSMIT_MODE_REG 4 -#define LOOPBACK_CONTROL BIT(1) -#define CONTROL_OUTPUT BIT(2) - -/* Receive Mode Register (DLCR5) */ -#define RECEIVE_MODE_REG 5 -#define RX_BUFFER_EMPTY BIT(6) -#define ACCEPT_BAD_PACKETS BIT(5) -#define RECEIVE_SHORT_ADDR BIT(4) -#define ACCEPT_SHORT_PACKETS BIT(3) -#define REMOTE_RESET BIT(2) - -#define ADDRESS_FILTER_MODE BIT(1) | BIT(0) -#define REJECT_ALL 0 -#define ACCEPT_ALL 3 -#define MODE_1 1 /* NODE ID, BC, MC, 2-24th bit */ -#define MODE_2 2 /* NODE ID, BC, MC, Hash Table */ - -/* Configuration Register 0 (DLCR6) */ -#define CONFIG_REG_0 6 -#define DLC_EN BIT(7) -#define SRAM_CYCLE_TIME_100NS BIT(6) -#define SYSTEM_BUS_WIDTH_8 BIT(5) /* 1 = 8bit, 0 = 16bit */ -#define BUFFER_WIDTH_8 BIT(4) /* 1 = 8bit, 0 = 16bit */ -#define TBS1 BIT(3) -#define TBS0 BIT(2) -#define SRAM_BS1 BIT(1) /* 00=8kb, 01=16kb */ -#define SRAM_BS0 BIT(0) /* 10=32kb, 11=64kb */ - -#ifndef ETH16I_TX_BUF_SIZE /* 0 = 2kb, 1 = 4kb */ -#define ETH16I_TX_BUF_SIZE 3 /* 2 = 8kb, 3 = 16kb */ -#endif -#define TX_BUF_1x2048 0 -#define TX_BUF_2x2048 1 -#define TX_BUF_2x4098 2 -#define TX_BUF_2x8192 3 - -/* Configuration Register 1 (DLCR7) */ -#define CONFIG_REG_1 7 -#define POWERUP BIT(5) - -/* Transmit start register */ -#define TRANSMIT_START_REG 10 -#define TRANSMIT_START_RB 2 -#define TX_START BIT(7) /* Rest of register bit indicate*/ - /* number of packets in tx buffer*/ -/* Node ID registers (DLCR8-13) */ -#define NODE_ID_0 8 -#define NODE_ID_RB 0 - -/* Hash Table registers (HT8-15) */ -#define HASH_TABLE_0 8 -#define HASH_TABLE_RB 1 - -/* Buffer memory ports */ -#define BUFFER_MEM_PORT_LB 8 -#define DATAPORT BUFFER_MEM_PORT_LB -#define BUFFER_MEM_PORT_HB 9 - -/* 16 Collision control register (BMPR11) */ -#define COL_16_REG 11 -#define HALT_ON_16 0x00 -#define RETRANS_AND_HALT_ON_16 0x02 - -/* Maximum number of attempts to send after 16 concecutive collisions */ -#define MAX_COL_16 10 - -/* DMA Burst and Transceiver Mode Register (BMPR13) */ -#define TRANSCEIVER_MODE_REG 13 -#define TRANSCEIVER_MODE_RB 2 -#define IO_BASE_UNLOCK BIT(7) -#define LOWER_SQUELCH_TRESH BIT(6) -#define LINK_TEST_DISABLE BIT(5) -#define AUI_SELECT BIT(4) -#define DIS_AUTO_PORT_SEL BIT(3) - -/* Filter Self Receive Register (BMPR14) */ -#define FILTER_SELF_RX_REG 14 -#define SKIP_RX_PACKET BIT(2) -#define FILTER_SELF_RECEIVE BIT(0) - -/* EEPROM Control Register (BMPR 16) */ -#define EEPROM_CTRL_REG 16 - -/* EEPROM Data Register (BMPR 17) */ -#define EEPROM_DATA_REG 17 - -/* NMC93CSx6 EEPROM Control Bits */ -#define CS_0 0x00 -#define CS_1 0x20 -#define SK_0 0x00 -#define SK_1 0x40 -#define DI_0 0x00 -#define DI_1 0x80 - -/* NMC93CSx6 EEPROM Instructions */ -#define EEPROM_READ 0x80 - -/* NMC93CSx6 EEPROM Addresses */ -#define E_NODEID_0 0x02 -#define E_NODEID_1 0x03 -#define E_NODEID_2 0x04 -#define E_PORT_SELECT 0x14 - #define E_PORT_BNC 0x00 - #define E_PORT_DIX 0x01 - #define E_PORT_TP 0x02 - #define E_PORT_AUTO 0x03 - #define E_PORT_FROM_EPROM 0x04 -#define E_PRODUCT_CFG 0x30 - - -/* Macro to slow down io between EEPROM clock transitions */ -#define eeprom_slow_io() do { int _i = 40; while(--_i > 0) { inb(0x80); }}while(0) - -/* Jumperless Configuration Register (BMPR19) */ -#define JUMPERLESS_CONFIG 19 - -/* ID ROM registers, writing to them also resets some parts of chip */ -#define ID_ROM_0 24 -#define ID_ROM_7 31 -#define RESET ID_ROM_0 - -/* This is the I/O address list to be probed when seeking the card */ -static unsigned int eth16i_portlist[] __initdata = { - 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300, 0 -}; - -static unsigned int eth32i_portlist[] __initdata = { - 0x1000, 0x2000, 0x3000, 0x4000, 0x5000, 0x6000, 0x7000, 0x8000, - 0x9000, 0xA000, 0xB000, 0xC000, 0xD000, 0xE000, 0xF000, 0 -}; - -/* This is the Interrupt lookup table for Eth16i card */ -static unsigned int eth16i_irqmap[] __initdata = { 9, 10, 5, 15, 0 }; -#define NUM_OF_ISA_IRQS 4 - -/* This is the Interrupt lookup table for Eth32i card */ -static unsigned int eth32i_irqmap[] __initdata = { 3, 5, 7, 9, 10, 11, 12, 15, 0 }; -#define EISA_IRQ_REG 0xc89 -#define NUM_OF_EISA_IRQS 8 - -static unsigned int eth16i_tx_buf_map[] = { 2048, 2048, 4096, 8192 }; - -/* Use 0 for production, 1 for verification, >2 for debug */ -#ifndef ETH16I_DEBUG -#define ETH16I_DEBUG 0 -#endif -static unsigned int eth16i_debug = ETH16I_DEBUG; - -/* Information for each board */ - -struct eth16i_local { - unsigned char tx_started; - unsigned char tx_buf_busy; - unsigned short tx_queue; /* Number of packets in transmit buffer */ - unsigned short tx_queue_len; - unsigned int tx_buf_size; - unsigned long open_time; - unsigned long tx_buffered_packets; - unsigned long tx_buffered_bytes; - unsigned long col_16; - spinlock_t lock; -}; - -/* Function prototypes */ - -static int eth16i_probe1(struct net_device *dev, int ioaddr); -static int eth16i_check_signature(int ioaddr); -static int eth16i_probe_port(int ioaddr); -static void eth16i_set_port(int ioaddr, int porttype); -static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l); -static int eth16i_receive_probe_packet(int ioaddr); -static int eth16i_get_irq(int ioaddr); -static int eth16i_read_eeprom(int ioaddr, int offset); -static int eth16i_read_eeprom_word(int ioaddr); -static void eth16i_eeprom_cmd(int ioaddr, unsigned char command); -static int eth16i_open(struct net_device *dev); -static int eth16i_close(struct net_device *dev); -static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev); -static void eth16i_rx(struct net_device *dev); -static void eth16i_timeout(struct net_device *dev); -static irqreturn_t eth16i_interrupt(int irq, void *dev_id); -static void eth16i_reset(struct net_device *dev); -static void eth16i_timeout(struct net_device *dev); -static void eth16i_skip_packet(struct net_device *dev); -static void eth16i_multicast(struct net_device *dev); -static void eth16i_select_regbank(unsigned char regbank, int ioaddr); -static void eth16i_initialize(struct net_device *dev, int boot); - -#if 0 -static int eth16i_set_irq(struct net_device *dev); -#endif - -#ifdef MODULE -static ushort eth16i_parse_mediatype(const char* s); -#endif - -static char cardname[] __initdata = "ICL EtherTeam 16i/32"; - -static int __init do_eth16i_probe(struct net_device *dev) -{ - int i; - int ioaddr; - int base_addr = dev->base_addr; - - if(eth16i_debug > 4) - printk(KERN_DEBUG "Probing started for %s\n", cardname); - - if(base_addr > 0x1ff) /* Check only single location */ - return eth16i_probe1(dev, base_addr); - else if(base_addr != 0) /* Don't probe at all */ - return -ENXIO; - - /* Seek card from the ISA io address space */ - for(i = 0; (ioaddr = eth16i_portlist[i]) ; i++) - if(eth16i_probe1(dev, ioaddr) == 0) - return 0; - - /* Seek card from the EISA io address space */ - for(i = 0; (ioaddr = eth32i_portlist[i]) ; i++) - if(eth16i_probe1(dev, ioaddr) == 0) - return 0; - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init eth16i_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct eth16i_local)); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_eth16i_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops eth16i_netdev_ops = { - .ndo_open = eth16i_open, - .ndo_stop = eth16i_close, - .ndo_start_xmit = eth16i_tx, - .ndo_set_rx_mode = eth16i_multicast, - .ndo_tx_timeout = eth16i_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init eth16i_probe1(struct net_device *dev, int ioaddr) -{ - struct eth16i_local *lp = netdev_priv(dev); - static unsigned version_printed; - int retval; - - /* Let's grab the region */ - if (!request_region(ioaddr, ETH16I_IO_EXTENT, cardname)) - return -EBUSY; - - /* - The MB86985 chip has on register which holds information in which - io address the chip lies. First read this register and compare - it to our current io address and if match then this could - be our chip. - */ - - if(ioaddr < 0x1000) { - if(eth16i_portlist[(inb(ioaddr + JUMPERLESS_CONFIG) & 0x07)] - != ioaddr) { - retval = -ENODEV; - goto out; - } - } - - /* Now we will go a bit deeper and try to find the chip's signature */ - - if(eth16i_check_signature(ioaddr) != 0) { - retval = -ENODEV; - goto out; - } - - /* - Now it seems that we have found a ethernet chip in this particular - ioaddr. The MB86985 chip has this feature, that when you read a - certain register it will increase it's io base address to next - configurable slot. Now when we have found the chip, first thing is - to make sure that the chip's ioaddr will hold still here. - */ - - eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr); - outb(0x00, ioaddr + TRANSCEIVER_MODE_REG); - - outb(0x00, ioaddr + RESET); /* Reset some parts of chip */ - BITSET(ioaddr + CONFIG_REG_0, BIT(7)); /* Disable the data link */ - - if( (eth16i_debug & version_printed++) == 0) - printk(KERN_INFO "%s", version); - - dev->base_addr = ioaddr; - dev->irq = eth16i_get_irq(ioaddr); - - /* Try to obtain interrupt vector */ - - if ((retval = request_irq(dev->irq, (void *)ð16i_interrupt, 0, cardname, dev))) { - printk(KERN_WARNING "%s at %#3x, but is unusable due to conflicting IRQ %d.\n", - cardname, ioaddr, dev->irq); - goto out; - } - - printk(KERN_INFO "%s: %s at %#3x, IRQ %d, ", - dev->name, cardname, ioaddr, dev->irq); - - - /* Now we will have to lock the chip's io address */ - eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr); - outb(0x38, ioaddr + TRANSCEIVER_MODE_REG); - - eth16i_initialize(dev, 1); /* Initialize rest of the chip's registers */ - - /* Now let's same some energy by shutting down the chip ;) */ - BITCLR(ioaddr + CONFIG_REG_1, POWERUP); - - /* Initialize the device structure */ - dev->netdev_ops = ð16i_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - spin_lock_init(&lp->lock); - - retval = register_netdev(dev); - if (retval) - goto out1; - return 0; -out1: - free_irq(dev->irq, dev); -out: - release_region(ioaddr, ETH16I_IO_EXTENT); - return retval; -} - - -static void eth16i_initialize(struct net_device *dev, int boot) -{ - int ioaddr = dev->base_addr; - int i, node_w = 0; - unsigned char node_byte = 0; - - /* Setup station address */ - eth16i_select_regbank(NODE_ID_RB, ioaddr); - for(i = 0 ; i < 3 ; i++) { - unsigned short node_val = eth16i_read_eeprom(ioaddr, E_NODEID_0 + i); - ((unsigned short *)dev->dev_addr)[i] = ntohs(node_val); - } - - for(i = 0; i < 6; i++) { - outb( ((unsigned char *)dev->dev_addr)[i], ioaddr + NODE_ID_0 + i); - if(boot) { - printk("%02x", inb(ioaddr + NODE_ID_0 + i)); - if(i != 5) - printk(":"); - } - } - - /* Now we will set multicast addresses to accept none */ - eth16i_select_regbank(HASH_TABLE_RB, ioaddr); - for(i = 0; i < 8; i++) - outb(0x00, ioaddr + HASH_TABLE_0 + i); - - /* - Now let's disable the transmitter and receiver, set the buffer ram - cycle time, bus width and buffer data path width. Also we shall - set transmit buffer size and total buffer size. - */ - - eth16i_select_regbank(2, ioaddr); - - node_byte = 0; - node_w = eth16i_read_eeprom(ioaddr, E_PRODUCT_CFG); - - if( (node_w & 0xFF00) == 0x0800) - node_byte |= BUFFER_WIDTH_8; - - node_byte |= SRAM_BS1; - - if( (node_w & 0x00FF) == 64) - node_byte |= SRAM_BS0; - - node_byte |= DLC_EN | SRAM_CYCLE_TIME_100NS | (ETH16I_TX_BUF_SIZE << 2); - - outb(node_byte, ioaddr + CONFIG_REG_0); - - /* We shall halt the transmitting, if 16 collisions are detected */ - outb(HALT_ON_16, ioaddr + COL_16_REG); - -#ifdef MODULE - /* if_port already set by init_module() */ -#else - dev->if_port = (dev->mem_start < E_PORT_FROM_EPROM) ? - dev->mem_start : E_PORT_FROM_EPROM; -#endif - - /* Set interface port type */ - if(boot) { - static const char * const porttype[] = { - "BNC", "DIX", "TP", "AUTO", "FROM_EPROM" - }; - - switch(dev->if_port) - { - - case E_PORT_FROM_EPROM: - dev->if_port = eth16i_read_eeprom(ioaddr, E_PORT_SELECT); - break; - - case E_PORT_AUTO: - dev->if_port = eth16i_probe_port(ioaddr); - break; - - case E_PORT_BNC: - case E_PORT_TP: - case E_PORT_DIX: - break; - } - - printk(" %s interface.\n", porttype[dev->if_port]); - - eth16i_set_port(ioaddr, dev->if_port); - } - - /* Set Receive Mode to normal operation */ - outb(MODE_2, ioaddr + RECEIVE_MODE_REG); -} - -static int eth16i_probe_port(int ioaddr) -{ - int i; - int retcode; - unsigned char dummy_packet[64]; - - /* Powerup the chip */ - outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1); - - BITSET(ioaddr + CONFIG_REG_0, DLC_EN); - - eth16i_select_regbank(NODE_ID_RB, ioaddr); - - for(i = 0; i < 6; i++) { - dummy_packet[i] = inb(ioaddr + NODE_ID_0 + i); - dummy_packet[i+6] = inb(ioaddr + NODE_ID_0 + i); - } - - dummy_packet[12] = 0x00; - dummy_packet[13] = 0x04; - memset(dummy_packet + 14, 0, sizeof(dummy_packet) - 14); - - eth16i_select_regbank(2, ioaddr); - - for(i = 0; i < 3; i++) { - BITSET(ioaddr + CONFIG_REG_0, DLC_EN); - BITCLR(ioaddr + CONFIG_REG_0, DLC_EN); - eth16i_set_port(ioaddr, i); - - if(eth16i_debug > 1) - printk(KERN_DEBUG "Set port number %d\n", i); - - retcode = eth16i_send_probe_packet(ioaddr, dummy_packet, 64); - if(retcode == 0) { - retcode = eth16i_receive_probe_packet(ioaddr); - if(retcode != -1) { - if(eth16i_debug > 1) - printk(KERN_DEBUG "Eth16i interface port found at %d\n", i); - return i; - } - } - else { - if(eth16i_debug > 1) - printk(KERN_DEBUG "TRANSMIT_DONE timeout when probing interface port\n"); - } - } - - if( eth16i_debug > 1) - printk(KERN_DEBUG "Using default port\n"); - - return E_PORT_BNC; -} - -static void eth16i_set_port(int ioaddr, int porttype) -{ - unsigned short temp = 0; - - eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr); - outb(LOOPBACK_CONTROL, ioaddr + TRANSMIT_MODE_REG); - - temp |= DIS_AUTO_PORT_SEL; - - switch(porttype) { - - case E_PORT_BNC : - temp |= AUI_SELECT; - break; - - case E_PORT_TP : - break; - - case E_PORT_DIX : - temp |= AUI_SELECT; - BITSET(ioaddr + TRANSMIT_MODE_REG, CONTROL_OUTPUT); - break; - } - - outb(temp, ioaddr + TRANSCEIVER_MODE_REG); - - if(eth16i_debug > 1) { - printk(KERN_DEBUG "TRANSMIT_MODE_REG = %x\n", inb(ioaddr + TRANSMIT_MODE_REG)); - printk(KERN_DEBUG "TRANSCEIVER_MODE_REG = %x\n", - inb(ioaddr+TRANSCEIVER_MODE_REG)); - } -} - -static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l) -{ - unsigned long starttime; - - outb(0xff, ioaddr + TX_STATUS_REG); - - outw(l, ioaddr + DATAPORT); - outsw(ioaddr + DATAPORT, (unsigned short *)b, (l + 1) >> 1); - - starttime = jiffies; - outb(TX_START | 1, ioaddr + TRANSMIT_START_REG); - - while( (inb(ioaddr + TX_STATUS_REG) & 0x80) == 0) { - if( time_after(jiffies, starttime + TX_TIMEOUT)) { - return -1; - } - } - - return 0; -} - -static int eth16i_receive_probe_packet(int ioaddr) -{ - unsigned long starttime; - - starttime = jiffies; - - while((inb(ioaddr + TX_STATUS_REG) & 0x20) == 0) { - if( time_after(jiffies, starttime + TX_TIMEOUT)) { - - if(eth16i_debug > 1) - printk(KERN_DEBUG "Timeout occurred waiting transmit packet received\n"); - starttime = jiffies; - while((inb(ioaddr + RX_STATUS_REG) & 0x80) == 0) { - if( time_after(jiffies, starttime + TX_TIMEOUT)) { - if(eth16i_debug > 1) - printk(KERN_DEBUG "Timeout occurred waiting receive packet\n"); - return -1; - } - } - - if(eth16i_debug > 1) - printk(KERN_DEBUG "RECEIVE_PACKET\n"); - return 0; /* Found receive packet */ - } - } - - if(eth16i_debug > 1) { - printk(KERN_DEBUG "TRANSMIT_PACKET_RECEIVED %x\n", inb(ioaddr + TX_STATUS_REG)); - printk(KERN_DEBUG "RX_STATUS_REG = %x\n", inb(ioaddr + RX_STATUS_REG)); - } - - return 0; /* Return success */ -} - -#if 0 -static int eth16i_set_irq(struct net_device* dev) -{ - const int ioaddr = dev->base_addr; - const int irq = dev->irq; - int i = 0; - - if(ioaddr < 0x1000) { - while(eth16i_irqmap[i] && eth16i_irqmap[i] != irq) - i++; - - if(i < NUM_OF_ISA_IRQS) { - u8 cbyte = inb(ioaddr + JUMPERLESS_CONFIG); - cbyte = (cbyte & 0x3F) | (i << 6); - outb(cbyte, ioaddr + JUMPERLESS_CONFIG); - return 0; - } - } - else { - printk(KERN_NOTICE "%s: EISA Interrupt cannot be set. Use EISA Configuration utility.\n", dev->name); - } - - return -1; - -} -#endif - -static int __init eth16i_get_irq(int ioaddr) -{ - unsigned char cbyte; - - if( ioaddr < 0x1000) { - cbyte = inb(ioaddr + JUMPERLESS_CONFIG); - return eth16i_irqmap[((cbyte & 0xC0) >> 6)]; - } else { /* Oh..the card is EISA so method getting IRQ different */ - unsigned short index = 0; - cbyte = inb(ioaddr + EISA_IRQ_REG); - while( (cbyte & 0x01) == 0) { - cbyte = cbyte >> 1; - index++; - } - return eth32i_irqmap[index]; - } -} - -static int __init eth16i_check_signature(int ioaddr) -{ - int i; - unsigned char creg[4] = { 0 }; - - for(i = 0; i < 4 ; i++) { - - creg[i] = inb(ioaddr + TRANSMIT_MODE_REG + i); - - if(eth16i_debug > 1) - printk("eth16i: read signature byte %x at %x\n", - creg[i], - ioaddr + TRANSMIT_MODE_REG + i); - } - - creg[0] &= 0x0F; /* Mask collision cnr */ - creg[2] &= 0x7F; /* Mask DCLEN bit */ - -#if 0 - /* - This was removed because the card was sometimes left to state - from which it couldn't be find anymore. If there is need - to more strict check still this have to be fixed. - */ - if( ! ((creg[0] == 0x06) && (creg[1] == 0x41)) ) { - if(creg[1] != 0x42) - return -1; - } -#endif - - if( !((creg[2] == 0x36) && (creg[3] == 0xE0)) ) { - creg[2] &= 0x40; - creg[3] &= 0x03; - - if( !((creg[2] == 0x40) && (creg[3] == 0x00)) ) - return -1; - } - - if(eth16i_read_eeprom(ioaddr, E_NODEID_0) != 0) - return -1; - - if((eth16i_read_eeprom(ioaddr, E_NODEID_1) & 0xFF00) != 0x4B00) - return -1; - - return 0; -} - -static int eth16i_read_eeprom(int ioaddr, int offset) -{ - int data = 0; - - eth16i_eeprom_cmd(ioaddr, EEPROM_READ | offset); - outb(CS_1, ioaddr + EEPROM_CTRL_REG); - data = eth16i_read_eeprom_word(ioaddr); - outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG); - - return data; -} - -static int eth16i_read_eeprom_word(int ioaddr) -{ - int i; - int data = 0; - - for(i = 16; i > 0; i--) { - outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG); - eeprom_slow_io(); - outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG); - eeprom_slow_io(); - data = (data << 1) | - ((inb(ioaddr + EEPROM_DATA_REG) & DI_1) ? 1 : 0); - - eeprom_slow_io(); - } - - return data; -} - -static void eth16i_eeprom_cmd(int ioaddr, unsigned char command) -{ - int i; - - outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG); - outb(DI_0, ioaddr + EEPROM_DATA_REG); - outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG); - outb(DI_1, ioaddr + EEPROM_DATA_REG); - outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG); - - for(i = 7; i >= 0; i--) { - short cmd = ( (command & (1 << i)) ? DI_1 : DI_0 ); - outb(cmd, ioaddr + EEPROM_DATA_REG); - outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG); - eeprom_slow_io(); - outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG); - eeprom_slow_io(); - } -} - -static int eth16i_open(struct net_device *dev) -{ - struct eth16i_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - /* Powerup the chip */ - outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1); - - /* Initialize the chip */ - eth16i_initialize(dev, 0); - - /* Set the transmit buffer size */ - lp->tx_buf_size = eth16i_tx_buf_map[ETH16I_TX_BUF_SIZE & 0x03]; - - if(eth16i_debug > 0) - printk(KERN_DEBUG "%s: transmit buffer size %d\n", - dev->name, lp->tx_buf_size); - - /* Now enable Transmitter and Receiver sections */ - BITCLR(ioaddr + CONFIG_REG_0, DLC_EN); - - /* Now switch to register bank 2, for run time operation */ - eth16i_select_regbank(2, ioaddr); - - lp->open_time = jiffies; - lp->tx_started = 0; - lp->tx_queue = 0; - lp->tx_queue_len = 0; - - /* Turn on interrupts*/ - outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG); - - netif_start_queue(dev); - return 0; -} - -static int eth16i_close(struct net_device *dev) -{ - struct eth16i_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - eth16i_reset(dev); - - /* Turn off interrupts*/ - outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG); - - netif_stop_queue(dev); - - lp->open_time = 0; - - /* Disable transmit and receive */ - BITSET(ioaddr + CONFIG_REG_0, DLC_EN); - - /* Reset the chip */ - /* outb(0xff, ioaddr + RESET); */ - /* outw(0xffff, ioaddr + TX_STATUS_REG); */ - - outb(0x00, ioaddr + CONFIG_REG_1); - - return 0; -} - -static void eth16i_timeout(struct net_device *dev) -{ - struct eth16i_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - /* - If we get here, some higher level has decided that - we are broken. There should really be a "kick me" - function call instead. - */ - - outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG); - printk(KERN_WARNING "%s: transmit timed out with status %04x, %s ?\n", - dev->name, - inw(ioaddr + TX_STATUS_REG), (inb(ioaddr + TX_STATUS_REG) & TX_DONE) ? - "IRQ conflict" : "network cable problem"); - - dev->trans_start = jiffies; /* prevent tx timeout */ - - /* Let's dump all registers */ - if(eth16i_debug > 0) { - printk(KERN_DEBUG "%s: timeout: %02x %02x %02x %02x %02x %02x %02x %02x.\n", - dev->name, inb(ioaddr + 0), - inb(ioaddr + 1), inb(ioaddr + 2), - inb(ioaddr + 3), inb(ioaddr + 4), - inb(ioaddr + 5), - inb(ioaddr + 6), inb(ioaddr + 7)); - - printk(KERN_DEBUG "%s: transmit start reg: %02x. collision reg %02x\n", - dev->name, inb(ioaddr + TRANSMIT_START_REG), - inb(ioaddr + COL_16_REG)); - printk(KERN_DEBUG "lp->tx_queue = %d\n", lp->tx_queue); - printk(KERN_DEBUG "lp->tx_queue_len = %d\n", lp->tx_queue_len); - printk(KERN_DEBUG "lp->tx_started = %d\n", lp->tx_started); - } - dev->stats.tx_errors++; - eth16i_reset(dev); - dev->trans_start = jiffies; /* prevent tx timeout */ - outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG); - netif_wake_queue(dev); -} - -static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev) -{ - struct eth16i_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - int status = 0; - ushort length = skb->len; - unsigned char *buf; - unsigned long flags; - - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - buf = skb->data; - - netif_stop_queue(dev); - - /* Turn off TX interrupts */ - outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG); - - /* We would be better doing the disable_irq tricks the 3c509 does, - that would make this suck a lot less */ - - spin_lock_irqsave(&lp->lock, flags); - - if( (length + 2) > (lp->tx_buf_size - lp->tx_queue_len)) { - if(eth16i_debug > 0) - printk(KERN_WARNING "%s: Transmit buffer full.\n", dev->name); - } - else { - outw(length, ioaddr + DATAPORT); - - if( ioaddr < 0x1000 ) - outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1); - else { - unsigned char frag = length % 4; - outsl(ioaddr + DATAPORT, buf, length >> 2); - if( frag != 0 ) { - outsw(ioaddr + DATAPORT, (buf + (length & 0xFFFC)), 1); - if( frag == 3 ) - outsw(ioaddr + DATAPORT, - (buf + (length & 0xFFFC) + 2), 1); - } - } - lp->tx_buffered_packets++; - lp->tx_buffered_bytes = length; - lp->tx_queue++; - lp->tx_queue_len += length + 2; - } - lp->tx_buf_busy = 0; - - if(lp->tx_started == 0) { - /* If the transmitter is idle..always trigger a transmit */ - outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - lp->tx_started = 1; - netif_wake_queue(dev); - } - else if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) { - /* There is still more room for one more packet in tx buffer */ - netif_wake_queue(dev); - } - - spin_unlock_irqrestore(&lp->lock, flags); - - outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG); - /* Turn TX interrupts back on */ - /* outb(TX_INTR_DONE | TX_INTR_16_COL, ioaddr + TX_INTR_REG); */ - status = 0; - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -static void eth16i_rx(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - int boguscount = MAX_RX_LOOP; - - /* Loop until all packets have been read */ - while( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) { - - /* Read status byte from receive buffer */ - ushort status = inw(ioaddr + DATAPORT); - - /* Get the size of the packet from receive buffer */ - ushort pkt_len = inw(ioaddr + DATAPORT); - - if(eth16i_debug > 4) - printk(KERN_DEBUG "%s: Receiving packet mode %02x status %04x.\n", - dev->name, - inb(ioaddr + RECEIVE_MODE_REG), status); - - if( !(status & PKT_GOOD) ) { - dev->stats.rx_errors++; - - if( (pkt_len < ETH_ZLEN) || (pkt_len > ETH_FRAME_LEN) ) { - dev->stats.rx_length_errors++; - eth16i_reset(dev); - return; - } - else { - eth16i_skip_packet(dev); - dev->stats.rx_dropped++; - } - } - else { /* Ok so now we should have a good packet */ - struct sk_buff *skb; - - skb = netdev_alloc_skb(dev, pkt_len + 3); - if( skb == NULL ) { - printk(KERN_WARNING "%s: Could'n allocate memory for packet (len %d)\n", - dev->name, pkt_len); - eth16i_skip_packet(dev); - dev->stats.rx_dropped++; - break; - } - - skb_reserve(skb,2); - - /* - Now let's get the packet out of buffer. - size is (pkt_len + 1) >> 1, cause we are now reading words - and it have to be even aligned. - */ - - if(ioaddr < 0x1000) - insw(ioaddr + DATAPORT, skb_put(skb, pkt_len), - (pkt_len + 1) >> 1); - else { - unsigned char *buf = skb_put(skb, pkt_len); - unsigned char frag = pkt_len % 4; - - insl(ioaddr + DATAPORT, buf, pkt_len >> 2); - - if(frag != 0) { - unsigned short rest[2]; - rest[0] = inw( ioaddr + DATAPORT ); - if(frag == 3) - rest[1] = inw( ioaddr + DATAPORT ); - - memcpy(buf + (pkt_len & 0xfffc), (char *)rest, frag); - } - } - - skb->protocol=eth_type_trans(skb, dev); - - if( eth16i_debug > 5 ) { - int i; - printk(KERN_DEBUG "%s: Received packet of length %d.\n", - dev->name, pkt_len); - for(i = 0; i < 14; i++) - printk(KERN_DEBUG " %02x", skb->data[i]); - printk(KERN_DEBUG ".\n"); - } - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - - } /* else */ - - if(--boguscount <= 0) - break; - - } /* while */ -} - -static irqreturn_t eth16i_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct eth16i_local *lp; - int ioaddr = 0, status; - int handled = 0; - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - - /* Turn off all interrupts from adapter */ - outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG); - - /* eth16i_tx won't be called */ - spin_lock(&lp->lock); - - status = inw(ioaddr + TX_STATUS_REG); /* Get the status */ - outw(status, ioaddr + TX_STATUS_REG); /* Clear status bits */ - - if (status) - handled = 1; - - if(eth16i_debug > 3) - printk(KERN_DEBUG "%s: Interrupt with status %04x.\n", dev->name, status); - - if( status & 0x7f00 ) { - - dev->stats.rx_errors++; - - if(status & (BUS_RD_ERR << 8) ) - printk(KERN_WARNING "%s: Bus read error.\n",dev->name); - if(status & (SHORT_PKT_ERR << 8) ) dev->stats.rx_length_errors++; - if(status & (ALIGN_ERR << 8) ) dev->stats.rx_frame_errors++; - if(status & (CRC_ERR << 8) ) dev->stats.rx_crc_errors++; - if(status & (RX_BUF_OVERFLOW << 8) ) dev->stats.rx_over_errors++; - } - if( status & 0x001a) { - - dev->stats.tx_errors++; - - if(status & CR_LOST) dev->stats.tx_carrier_errors++; - if(status & TX_JABBER_ERR) dev->stats.tx_window_errors++; - -#if 0 - if(status & COLLISION) { - dev->stats.collisions += - ((inb(ioaddr+TRANSMIT_MODE_REG) & 0xF0) >> 4); - } -#endif - if(status & COLLISIONS_16) { - if(lp->col_16 < MAX_COL_16) { - lp->col_16++; - dev->stats.collisions++; - /* Resume transmitting, skip failed packet */ - outb(0x02, ioaddr + COL_16_REG); - } - else { - printk(KERN_WARNING "%s: bailing out due to many consecutive 16-in-a-row collisions. Network cable problem?\n", dev->name); - } - } - } - - if( status & 0x00ff ) { /* Let's check the transmit status reg */ - - if(status & TX_DONE) { /* The transmit has been done */ - dev->stats.tx_packets = lp->tx_buffered_packets; - dev->stats.tx_bytes += lp->tx_buffered_bytes; - lp->col_16 = 0; - - if(lp->tx_queue) { /* Is there still packets ? */ - /* There was packet(s) so start transmitting and write also - how many packets there is to be sended */ - outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - lp->tx_started = 1; - } - else { - lp->tx_started = 0; - } - netif_wake_queue(dev); - } - } - - if( ( status & 0x8000 ) || - ( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) ) { - eth16i_rx(dev); /* We have packet in receive buffer */ - } - - /* Turn interrupts back on */ - outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG); - - if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) { - /* There is still more room for one more packet in tx buffer */ - netif_wake_queue(dev); - } - - spin_unlock(&lp->lock); - - return IRQ_RETVAL(handled); -} - -static void eth16i_skip_packet(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - inw(ioaddr + DATAPORT); - inw(ioaddr + DATAPORT); - inw(ioaddr + DATAPORT); - - outb(SKIP_RX_PACKET, ioaddr + FILTER_SELF_RX_REG); - while( inb( ioaddr + FILTER_SELF_RX_REG ) != 0); -} - -static void eth16i_reset(struct net_device *dev) -{ - struct eth16i_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - if(eth16i_debug > 1) - printk(KERN_DEBUG "%s: Resetting device.\n", dev->name); - - BITSET(ioaddr + CONFIG_REG_0, DLC_EN); - outw(0xffff, ioaddr + TX_STATUS_REG); - eth16i_select_regbank(2, ioaddr); - - lp->tx_started = 0; - lp->tx_buf_busy = 0; - lp->tx_queue = 0; - lp->tx_queue_len = 0; - BITCLR(ioaddr + CONFIG_REG_0, DLC_EN); -} - -static void eth16i_multicast(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC)) - { - outb(3, ioaddr + RECEIVE_MODE_REG); - } else { - outb(2, ioaddr + RECEIVE_MODE_REG); - } -} - -static void eth16i_select_regbank(unsigned char banknbr, int ioaddr) -{ - unsigned char data; - - data = inb(ioaddr + CONFIG_REG_1); - outb( ((data & 0xF3) | ( (banknbr & 0x03) << 2)), ioaddr + CONFIG_REG_1); -} - -#ifdef MODULE - -static ushort eth16i_parse_mediatype(const char* s) -{ - if(!s) - return E_PORT_FROM_EPROM; - - if (!strncmp(s, "bnc", 3)) - return E_PORT_BNC; - else if (!strncmp(s, "tp", 2)) - return E_PORT_TP; - else if (!strncmp(s, "dix", 3)) - return E_PORT_DIX; - else if (!strncmp(s, "auto", 4)) - return E_PORT_AUTO; - else - return E_PORT_FROM_EPROM; -} - -#define MAX_ETH16I_CARDS 4 /* Max number of Eth16i cards per module */ - -static struct net_device *dev_eth16i[MAX_ETH16I_CARDS]; -static int io[MAX_ETH16I_CARDS]; -#if 0 -static int irq[MAX_ETH16I_CARDS]; -#endif -static char* mediatype[MAX_ETH16I_CARDS]; -static int debug = -1; - -MODULE_AUTHOR("Mika Kuoppala <miku@iki.fi>"); -MODULE_DESCRIPTION("ICL EtherTeam 16i/32 driver"); -MODULE_LICENSE("GPL"); - - -module_param_array(io, int, NULL, 0); -MODULE_PARM_DESC(io, "eth16i I/O base address(es)"); - -#if 0 -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(irq, "eth16i interrupt request number"); -#endif - -module_param_array(mediatype, charp, NULL, 0); -MODULE_PARM_DESC(mediatype, "eth16i media type of interface(s) (bnc,tp,dix,auto,eprom)"); - -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "eth16i debug level (0-6)"); - -int __init init_module(void) -{ - int this_dev, found = 0; - struct net_device *dev; - - for (this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) { - dev = alloc_etherdev(sizeof(struct eth16i_local)); - if (!dev) - break; - - dev->base_addr = io[this_dev]; - - if(debug != -1) - eth16i_debug = debug; - - if(eth16i_debug > 1) - printk(KERN_NOTICE "eth16i(%d): interface type %s\n", this_dev, mediatype[this_dev] ? mediatype[this_dev] : "none" ); - - dev->if_port = eth16i_parse_mediatype(mediatype[this_dev]); - - if(io[this_dev] == 0) { - if (this_dev != 0) { /* Only autoprobe 1st one */ - free_netdev(dev); - break; - } - - printk(KERN_NOTICE "eth16i.c: Presently autoprobing (not recommended) for a single card.\n"); - } - - if (do_eth16i_probe(dev) == 0) { - dev_eth16i[found++] = dev; - continue; - } - printk(KERN_WARNING "eth16i.c No Eth16i card found (i/o = 0x%x).\n", - io[this_dev]); - free_netdev(dev); - break; - } - if (found) - return 0; - return -ENXIO; -} - -void __exit cleanup_module(void) -{ - int this_dev; - - for(this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) { - struct net_device *dev = dev_eth16i[this_dev]; - - if (netdev_priv(dev)) { - unregister_netdev(dev); - free_irq(dev->irq, dev); - release_region(dev->base_addr, ETH16I_IO_EXTENT); - free_netdev(dev); - } - } -} -#endif /* MODULE */ diff --git a/drivers/net/ethernet/i825xx/3c505.c b/drivers/net/ethernet/i825xx/3c505.c deleted file mode 100644 index 6d000d6..0000000 --- a/drivers/net/ethernet/i825xx/3c505.c +++ /dev/null @@ -1,1672 +0,0 @@ -/* - * Linux Ethernet device driver for the 3Com Etherlink Plus (3C505) - * By Craig Southeren, Juha Laiho and Philip Blundell - * - * 3c505.c This module implements an interface to the 3Com - * Etherlink Plus (3c505) Ethernet card. Linux device - * driver interface reverse engineered from the Linux 3C509 - * device drivers. Some 3C505 information gleaned from - * the Crynwr packet driver. Still this driver would not - * be here without 3C505 technical reference provided by - * 3Com. - * - * $Id: 3c505.c,v 1.10 1996/04/16 13:06:27 phil Exp $ - * - * Authors: Linux 3c505 device driver by - * Craig Southeren, <craigs@ineluki.apana.org.au> - * Final debugging by - * Andrew Tridgell, <tridge@nimbus.anu.edu.au> - * Auto irq/address, tuning, cleanup and v1.1.4+ kernel mods by - * Juha Laiho, <jlaiho@ichaos.nullnet.fi> - * Linux 3C509 driver by - * Donald Becker, <becker@super.org> - * (Now at <becker@scyld.com>) - * Crynwr packet driver by - * Krishnan Gopalan and Gregg Stefancik, - * Clemson University Engineering Computer Operations. - * Portions of the code have been adapted from the 3c505 - * driver for NCSA Telnet by Bruce Orchard and later - * modified by Warren Van Houten and krus@diku.dk. - * 3C505 technical information provided by - * Terry Murphy, of 3Com Network Adapter Division - * Linux 1.3.0 changes by - * Alan Cox <Alan.Cox@linux.org> - * More debugging, DMA support, currently maintained by - * Philip Blundell <philb@gnu.org> - * Multicard/soft configurable dma channel/rev 2 hardware support - * by Christopher Collins <ccollins@pcug.org.au> - * Ethtool support (jgarzik), 11/17/2001 - */ - -#define DRV_NAME "3c505" -#define DRV_VERSION "1.10a" - - -/* Theory of operation: - * - * The 3c505 is quite an intelligent board. All communication with it is done - * by means of Primary Command Blocks (PCBs); these are transferred using PIO - * through the command register. The card has 256k of on-board RAM, which is - * used to buffer received packets. It might seem at first that more buffers - * are better, but in fact this isn't true. From my tests, it seems that - * more than about 10 buffers are unnecessary, and there is a noticeable - * performance hit in having more active on the card. So the majority of the - * card's memory isn't, in fact, used. Sadly, the card only has one transmit - * buffer and, short of loading our own firmware into it (which is what some - * drivers resort to) there's nothing we can do about this. - * - * We keep up to 4 "receive packet" commands active on the board at a time. - * When a packet comes in, so long as there is a receive command active, the - * board will send us a "packet received" PCB and then add the data for that - * packet to the DMA queue. If a DMA transfer is not already in progress, we - * set one up to start uploading the data. We have to maintain a list of - * backlogged receive packets, because the card may decide to tell us about - * a newly-arrived packet at any time, and we may not be able to start a DMA - * transfer immediately (ie one may already be going on). We can't NAK the - * PCB, because then it would throw the packet away. - * - * Trying to send a PCB to the card at the wrong moment seems to have bad - * effects. If we send it a transmit PCB while a receive DMA is happening, - * it will just NAK the PCB and so we will have wasted our time. Worse, it - * sometimes seems to interrupt the transfer. The majority of the low-level - * code is protected by one huge semaphore -- "busy" -- which is set whenever - * it probably isn't safe to do anything to the card. The receive routine - * must gain a lock on "busy" before it can start a DMA transfer, and the - * transmit routine must gain a lock before it sends the first PCB to the card. - * The send_pcb() routine also has an internal semaphore to protect it against - * being re-entered (which would be disastrous) -- this is needed because - * several things can happen asynchronously (re-priming the receiver and - * asking the card for statistics, for example). send_pcb() will also refuse - * to talk to the card at all if a DMA upload is happening. The higher-level - * networking code will reschedule a later retry if some part of the driver - * is blocked. In practice, this doesn't seem to happen very often. - */ - -/* This driver may now work with revision 2.x hardware, since all the read - * operations on the HCR have been removed (we now keep our own softcopy). - * But I don't have an old card to test it on. - * - * This has had the bad effect that the autoprobe routine is now a bit - * less friendly to other devices. However, it was never very good. - * before, so I doubt it will hurt anybody. - */ - -/* The driver is a mess. I took Craig's and Juha's code, and hacked it firstly - * to make it more reliable, and secondly to add DMA mode. Many things could - * probably be done better; the concurrency protection is particularly awful. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/in.h> -#include <linux/ioport.h> -#include <linux/spinlock.h> -#include <linux/ethtool.h> -#include <linux/delay.h> -#include <linux/bitops.h> -#include <linux/gfp.h> - -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/dma.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/init.h> - -#include "3c505.h" - -/********************************************************* - * - * define debug messages here as common strings to reduce space - * - *********************************************************/ - -#define timeout_msg "*** timeout at %s:%s (line %d) ***\n" -#define TIMEOUT_MSG(lineno) \ - pr_notice(timeout_msg, __FILE__, __func__, (lineno)) - -#define invalid_pcb_msg "*** invalid pcb length %d at %s:%s (line %d) ***\n" -#define INVALID_PCB_MSG(len) \ - pr_notice(invalid_pcb_msg, (len), __FILE__, __func__, __LINE__) - -#define search_msg "%s: Looking for 3c505 adapter at address %#x..." - -#define stilllooking_msg "still looking..." - -#define found_msg "found.\n" - -#define notfound_msg "not found (reason = %d)\n" - -#define couldnot_msg "%s: 3c505 not found\n" - -/********************************************************* - * - * various other debug stuff - * - *********************************************************/ - -#ifdef ELP_DEBUG -static int elp_debug = ELP_DEBUG; -#else -static int elp_debug; -#endif -#define debug elp_debug - -/* - * 0 = no messages (well, some) - * 1 = messages when high level commands performed - * 2 = messages when low level commands performed - * 3 = messages when interrupts received - */ - -/***************************************************************** - * - * List of I/O-addresses we try to auto-sense - * Last element MUST BE 0! - *****************************************************************/ - -static int addr_list[] __initdata = {0x300, 0x280, 0x310, 0}; - -/* Dma Memory related stuff */ - -static unsigned long dma_mem_alloc(int size) -{ - int order = get_order(size); - return __get_dma_pages(GFP_KERNEL, order); -} - - -/***************************************************************** - * - * Functions for I/O (note the inline !) - * - *****************************************************************/ - -static inline unsigned char inb_status(unsigned int base_addr) -{ - return inb(base_addr + PORT_STATUS); -} - -static inline int inb_command(unsigned int base_addr) -{ - return inb(base_addr + PORT_COMMAND); -} - -static inline void outb_control(unsigned char val, struct net_device *dev) -{ - outb(val, dev->base_addr + PORT_CONTROL); - ((elp_device *)(netdev_priv(dev)))->hcr_val = val; -} - -#define HCR_VAL(x) (((elp_device *)(netdev_priv(x)))->hcr_val) - -static inline void outb_command(unsigned char val, unsigned int base_addr) -{ - outb(val, base_addr + PORT_COMMAND); -} - -static inline unsigned int backlog_next(unsigned int n) -{ - return (n + 1) % BACKLOG_SIZE; -} - -/***************************************************************** - * - * useful functions for accessing the adapter - * - *****************************************************************/ - -/* - * use this routine when accessing the ASF bits as they are - * changed asynchronously by the adapter - */ - -/* get adapter PCB status */ -#define GET_ASF(addr) \ - (get_status(addr)&ASF_PCB_MASK) - -static inline int get_status(unsigned int base_addr) -{ - unsigned long timeout = jiffies + 10*HZ/100; - register int stat1; - do { - stat1 = inb_status(base_addr); - } while (stat1 != inb_status(base_addr) && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) - TIMEOUT_MSG(__LINE__); - return stat1; -} - -static inline void set_hsf(struct net_device *dev, int hsf) -{ - elp_device *adapter = netdev_priv(dev); - unsigned long flags; - - spin_lock_irqsave(&adapter->lock, flags); - outb_control((HCR_VAL(dev) & ~HSF_PCB_MASK) | hsf, dev); - spin_unlock_irqrestore(&adapter->lock, flags); -} - -static bool start_receive(struct net_device *, pcb_struct *); - -static inline void adapter_reset(struct net_device *dev) -{ - unsigned long timeout; - elp_device *adapter = netdev_priv(dev); - unsigned char orig_hcr = adapter->hcr_val; - - outb_control(0, dev); - - if (inb_status(dev->base_addr) & ACRF) { - do { - inb_command(dev->base_addr); - timeout = jiffies + 2*HZ/100; - while (time_before_eq(jiffies, timeout) && !(inb_status(dev->base_addr) & ACRF)); - } while (inb_status(dev->base_addr) & ACRF); - set_hsf(dev, HSF_PCB_NAK); - } - outb_control(adapter->hcr_val | ATTN | DIR, dev); - mdelay(10); - outb_control(adapter->hcr_val & ~ATTN, dev); - mdelay(10); - outb_control(adapter->hcr_val | FLSH, dev); - mdelay(10); - outb_control(adapter->hcr_val & ~FLSH, dev); - mdelay(10); - - outb_control(orig_hcr, dev); - if (!start_receive(dev, &adapter->tx_pcb)) - pr_err("%s: start receive command failed\n", dev->name); -} - -/* Check to make sure that a DMA transfer hasn't timed out. This should - * never happen in theory, but seems to occur occasionally if the card gets - * prodded at the wrong time. - */ -static inline void check_3c505_dma(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) { - unsigned long flags, f; - pr_err("%s: DMA %s timed out, %d bytes left\n", dev->name, - adapter->current_dma.direction ? "download" : "upload", - get_dma_residue(dev->dma)); - spin_lock_irqsave(&adapter->lock, flags); - adapter->dmaing = 0; - adapter->busy = 0; - - f=claim_dma_lock(); - disable_dma(dev->dma); - release_dma_lock(f); - - if (adapter->rx_active) - adapter->rx_active--; - outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev); - spin_unlock_irqrestore(&adapter->lock, flags); - } -} - -/* Primitive functions used by send_pcb() */ -static inline bool send_pcb_slow(unsigned int base_addr, unsigned char byte) -{ - unsigned long timeout; - outb_command(byte, base_addr); - for (timeout = jiffies + 5*HZ/100; time_before(jiffies, timeout);) { - if (inb_status(base_addr) & HCRE) - return false; - } - pr_warning("3c505: send_pcb_slow timed out\n"); - return true; -} - -static inline bool send_pcb_fast(unsigned int base_addr, unsigned char byte) -{ - unsigned int timeout; - outb_command(byte, base_addr); - for (timeout = 0; timeout < 40000; timeout++) { - if (inb_status(base_addr) & HCRE) - return false; - } - pr_warning("3c505: send_pcb_fast timed out\n"); - return true; -} - -/* Check to see if the receiver needs restarting, and kick it if so */ -static inline void prime_rx(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - while (adapter->rx_active < ELP_RX_PCBS && netif_running(dev)) { - if (!start_receive(dev, &adapter->itx_pcb)) - break; - } -} - -/***************************************************************** - * - * send_pcb - * Send a PCB to the adapter. - * - * output byte to command reg --<--+ - * wait until HCRE is non zero | - * loop until all bytes sent -->--+ - * set HSF1 and HSF2 to 1 - * output pcb length - * wait until ASF give ACK or NAK - * set HSF1 and HSF2 to 0 - * - *****************************************************************/ - -/* This can be quite slow -- the adapter is allowed to take up to 40ms - * to respond to the initial interrupt. - * - * We run initially with interrupts turned on, but with a semaphore set - * so that nobody tries to re-enter this code. Once the first byte has - * gone through, we turn interrupts off and then send the others (the - * timeout is reduced to 500us). - */ - -static bool send_pcb(struct net_device *dev, pcb_struct * pcb) -{ - int i; - unsigned long timeout; - elp_device *adapter = netdev_priv(dev); - unsigned long flags; - - check_3c505_dma(dev); - - if (adapter->dmaing && adapter->current_dma.direction == 0) - return false; - - /* Avoid contention */ - if (test_and_set_bit(1, &adapter->send_pcb_semaphore)) { - if (elp_debug >= 3) { - pr_debug("%s: send_pcb entered while threaded\n", dev->name); - } - return false; - } - /* - * load each byte into the command register and - * wait for the HCRE bit to indicate the adapter - * had read the byte - */ - set_hsf(dev, 0); - - if (send_pcb_slow(dev->base_addr, pcb->command)) - goto abort; - - spin_lock_irqsave(&adapter->lock, flags); - - if (send_pcb_fast(dev->base_addr, pcb->length)) - goto sti_abort; - - for (i = 0; i < pcb->length; i++) { - if (send_pcb_fast(dev->base_addr, pcb->data.raw[i])) - goto sti_abort; - } - - outb_control(adapter->hcr_val | 3, dev); /* signal end of PCB */ - outb_command(2 + pcb->length, dev->base_addr); - - /* now wait for the acknowledgement */ - spin_unlock_irqrestore(&adapter->lock, flags); - - for (timeout = jiffies + 5*HZ/100; time_before(jiffies, timeout);) { - switch (GET_ASF(dev->base_addr)) { - case ASF_PCB_ACK: - adapter->send_pcb_semaphore = 0; - return true; - - case ASF_PCB_NAK: -#ifdef ELP_DEBUG - pr_debug("%s: send_pcb got NAK\n", dev->name); -#endif - goto abort; - } - } - - if (elp_debug >= 1) - pr_debug("%s: timeout waiting for PCB acknowledge (status %02x)\n", - dev->name, inb_status(dev->base_addr)); - goto abort; - - sti_abort: - spin_unlock_irqrestore(&adapter->lock, flags); - abort: - adapter->send_pcb_semaphore = 0; - return false; -} - - -/***************************************************************** - * - * receive_pcb - * Read a PCB from the adapter - * - * wait for ACRF to be non-zero ---<---+ - * input a byte | - * if ASF1 and ASF2 were not both one | - * before byte was read, loop --->---+ - * set HSF1 and HSF2 for ack - * - *****************************************************************/ - -static bool receive_pcb(struct net_device *dev, pcb_struct * pcb) -{ - int i, j; - int total_length; - int stat; - unsigned long timeout; - unsigned long flags; - - elp_device *adapter = netdev_priv(dev); - - set_hsf(dev, 0); - - /* get the command code */ - timeout = jiffies + 2*HZ/100; - while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) { - TIMEOUT_MSG(__LINE__); - return false; - } - pcb->command = inb_command(dev->base_addr); - - /* read the data length */ - timeout = jiffies + 3*HZ/100; - while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) { - TIMEOUT_MSG(__LINE__); - pr_info("%s: status %02x\n", dev->name, stat); - return false; - } - pcb->length = inb_command(dev->base_addr); - - if (pcb->length > MAX_PCB_DATA) { - INVALID_PCB_MSG(pcb->length); - adapter_reset(dev); - return false; - } - /* read the data */ - spin_lock_irqsave(&adapter->lock, flags); - for (i = 0; i < MAX_PCB_DATA; i++) { - for (j = 0; j < 20000; j++) { - stat = get_status(dev->base_addr); - if (stat & ACRF) - break; - } - pcb->data.raw[i] = inb_command(dev->base_addr); - if ((stat & ASF_PCB_MASK) == ASF_PCB_END || j >= 20000) - break; - } - spin_unlock_irqrestore(&adapter->lock, flags); - if (i >= MAX_PCB_DATA) { - INVALID_PCB_MSG(i); - return false; - } - if (j >= 20000) { - TIMEOUT_MSG(__LINE__); - return false; - } - /* the last "data" byte was really the length! */ - total_length = pcb->data.raw[i]; - - /* safety check total length vs data length */ - if (total_length != (pcb->length + 2)) { - if (elp_debug >= 2) - pr_warning("%s: mangled PCB received\n", dev->name); - set_hsf(dev, HSF_PCB_NAK); - return false; - } - - if (pcb->command == CMD_RECEIVE_PACKET_COMPLETE) { - if (test_and_set_bit(0, (void *) &adapter->busy)) { - if (backlog_next(adapter->rx_backlog.in) == adapter->rx_backlog.out) { - set_hsf(dev, HSF_PCB_NAK); - pr_warning("%s: PCB rejected, transfer in progress and backlog full\n", dev->name); - pcb->command = 0; - return true; - } else { - pcb->command = 0xff; - } - } - } - set_hsf(dev, HSF_PCB_ACK); - return true; -} - -/****************************************************** - * - * queue a receive command on the adapter so we will get an - * interrupt when a packet is received. - * - ******************************************************/ - -static bool start_receive(struct net_device *dev, pcb_struct * tx_pcb) -{ - bool status; - elp_device *adapter = netdev_priv(dev); - - if (elp_debug >= 3) - pr_debug("%s: restarting receiver\n", dev->name); - tx_pcb->command = CMD_RECEIVE_PACKET; - tx_pcb->length = sizeof(struct Rcv_pkt); - tx_pcb->data.rcv_pkt.buf_seg - = tx_pcb->data.rcv_pkt.buf_ofs = 0; /* Unused */ - tx_pcb->data.rcv_pkt.buf_len = 1600; - tx_pcb->data.rcv_pkt.timeout = 0; /* set timeout to zero */ - status = send_pcb(dev, tx_pcb); - if (status) - adapter->rx_active++; - return status; -} - -/****************************************************** - * - * extract a packet from the adapter - * this routine is only called from within the interrupt - * service routine, so no cli/sti calls are needed - * note that the length is always assumed to be even - * - ******************************************************/ - -static void receive_packet(struct net_device *dev, int len) -{ - int rlen; - elp_device *adapter = netdev_priv(dev); - void *target; - struct sk_buff *skb; - unsigned long flags; - - rlen = (len + 1) & ~1; - skb = netdev_alloc_skb(dev, rlen + 2); - - if (!skb) { - pr_warning("%s: memory squeeze, dropping packet\n", dev->name); - target = adapter->dma_buffer; - adapter->current_dma.target = NULL; - /* FIXME: stats */ - return; - } - - skb_reserve(skb, 2); - target = skb_put(skb, rlen); - if ((unsigned long)(target + rlen) >= MAX_DMA_ADDRESS) { - adapter->current_dma.target = target; - target = adapter->dma_buffer; - } else { - adapter->current_dma.target = NULL; - } - - /* if this happens, we die */ - if (test_and_set_bit(0, (void *) &adapter->dmaing)) - pr_err("%s: rx blocked, DMA in progress, dir %d\n", - dev->name, adapter->current_dma.direction); - - adapter->current_dma.direction = 0; - adapter->current_dma.length = rlen; - adapter->current_dma.skb = skb; - adapter->current_dma.start_time = jiffies; - - outb_control(adapter->hcr_val | DIR | TCEN | DMAE, dev); - - flags=claim_dma_lock(); - disable_dma(dev->dma); - clear_dma_ff(dev->dma); - set_dma_mode(dev->dma, 0x04); /* dma read */ - set_dma_addr(dev->dma, isa_virt_to_bus(target)); - set_dma_count(dev->dma, rlen); - enable_dma(dev->dma); - release_dma_lock(flags); - - if (elp_debug >= 3) { - pr_debug("%s: rx DMA transfer started\n", dev->name); - } - - if (adapter->rx_active) - adapter->rx_active--; - - if (!adapter->busy) - pr_warning("%s: receive_packet called, busy not set.\n", dev->name); -} - -/****************************************************** - * - * interrupt handler - * - ******************************************************/ - -static irqreturn_t elp_interrupt(int irq, void *dev_id) -{ - int len; - int dlen; - int icount = 0; - struct net_device *dev = dev_id; - elp_device *adapter = netdev_priv(dev); - unsigned long timeout; - - spin_lock(&adapter->lock); - - do { - /* - * has a DMA transfer finished? - */ - if (inb_status(dev->base_addr) & DONE) { - if (!adapter->dmaing) - pr_warning("%s: phantom DMA completed\n", dev->name); - - if (elp_debug >= 3) - pr_debug("%s: %s DMA complete, status %02x\n", dev->name, - adapter->current_dma.direction ? "tx" : "rx", - inb_status(dev->base_addr)); - - outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev); - if (adapter->current_dma.direction) { - dev_kfree_skb_irq(adapter->current_dma.skb); - } else { - struct sk_buff *skb = adapter->current_dma.skb; - if (skb) { - if (adapter->current_dma.target) { - /* have already done the skb_put() */ - memcpy(adapter->current_dma.target, adapter->dma_buffer, adapter->current_dma.length); - } - skb->protocol = eth_type_trans(skb,dev); - dev->stats.rx_bytes += skb->len; - netif_rx(skb); - } - } - adapter->dmaing = 0; - if (adapter->rx_backlog.in != adapter->rx_backlog.out) { - int t = adapter->rx_backlog.length[adapter->rx_backlog.out]; - adapter->rx_backlog.out = backlog_next(adapter->rx_backlog.out); - if (elp_debug >= 2) - pr_debug("%s: receiving backlogged packet (%d)\n", dev->name, t); - receive_packet(dev, t); - } else { - adapter->busy = 0; - } - } else { - /* has one timed out? */ - check_3c505_dma(dev); - } - - /* - * receive a PCB from the adapter - */ - timeout = jiffies + 3*HZ/100; - while ((inb_status(dev->base_addr) & ACRF) != 0 && time_before(jiffies, timeout)) { - if (receive_pcb(dev, &adapter->irx_pcb)) { - switch (adapter->irx_pcb.command) - { - case 0: - break; - /* - * received a packet - this must be handled fast - */ - case 0xff: - case CMD_RECEIVE_PACKET_COMPLETE: - /* if the device isn't open, don't pass packets up the stack */ - if (!netif_running(dev)) - break; - len = adapter->irx_pcb.data.rcv_resp.pkt_len; - dlen = adapter->irx_pcb.data.rcv_resp.buf_len; - if (adapter->irx_pcb.data.rcv_resp.timeout != 0) { - pr_err("%s: interrupt - packet not received correctly\n", dev->name); - } else { - if (elp_debug >= 3) { - pr_debug("%s: interrupt - packet received of length %i (%i)\n", - dev->name, len, dlen); - } - if (adapter->irx_pcb.command == 0xff) { - if (elp_debug >= 2) - pr_debug("%s: adding packet to backlog (len = %d)\n", - dev->name, dlen); - adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen; - adapter->rx_backlog.in = backlog_next(adapter->rx_backlog.in); - } else { - receive_packet(dev, dlen); - } - if (elp_debug >= 3) - pr_debug("%s: packet received\n", dev->name); - } - break; - - /* - * 82586 configured correctly - */ - case CMD_CONFIGURE_82586_RESPONSE: - adapter->got[CMD_CONFIGURE_82586] = 1; - if (elp_debug >= 3) - pr_debug("%s: interrupt - configure response received\n", dev->name); - break; - - /* - * Adapter memory configuration - */ - case CMD_CONFIGURE_ADAPTER_RESPONSE: - adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 1; - if (elp_debug >= 3) - pr_debug("%s: Adapter memory configuration %s.\n", dev->name, - adapter->irx_pcb.data.failed ? "failed" : "succeeded"); - break; - - /* - * Multicast list loading - */ - case CMD_LOAD_MULTICAST_RESPONSE: - adapter->got[CMD_LOAD_MULTICAST_LIST] = 1; - if (elp_debug >= 3) - pr_debug("%s: Multicast address list loading %s.\n", dev->name, - adapter->irx_pcb.data.failed ? "failed" : "succeeded"); - break; - - /* - * Station address setting - */ - case CMD_SET_ADDRESS_RESPONSE: - adapter->got[CMD_SET_STATION_ADDRESS] = 1; - if (elp_debug >= 3) - pr_debug("%s: Ethernet address setting %s.\n", dev->name, - adapter->irx_pcb.data.failed ? "failed" : "succeeded"); - break; - - - /* - * received board statistics - */ - case CMD_NETWORK_STATISTICS_RESPONSE: - dev->stats.rx_packets += adapter->irx_pcb.data.netstat.tot_recv; - dev->stats.tx_packets += adapter->irx_pcb.data.netstat.tot_xmit; - dev->stats.rx_crc_errors += adapter->irx_pcb.data.netstat.err_CRC; - dev->stats.rx_frame_errors += adapter->irx_pcb.data.netstat.err_align; - dev->stats.rx_fifo_errors += adapter->irx_pcb.data.netstat.err_ovrrun; - dev->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res; - adapter->got[CMD_NETWORK_STATISTICS] = 1; - if (elp_debug >= 3) - pr_debug("%s: interrupt - statistics response received\n", dev->name); - break; - - /* - * sent a packet - */ - case CMD_TRANSMIT_PACKET_COMPLETE: - if (elp_debug >= 3) - pr_debug("%s: interrupt - packet sent\n", dev->name); - if (!netif_running(dev)) - break; - switch (adapter->irx_pcb.data.xmit_resp.c_stat) { - case 0xffff: - dev->stats.tx_aborted_errors++; - pr_info("%s: transmit timed out, network cable problem?\n", dev->name); - break; - case 0xfffe: - dev->stats.tx_fifo_errors++; - pr_info("%s: transmit timed out, FIFO underrun\n", dev->name); - break; - } - netif_wake_queue(dev); - break; - - /* - * some unknown PCB - */ - default: - pr_debug("%s: unknown PCB received - %2.2x\n", - dev->name, adapter->irx_pcb.command); - break; - } - } else { - pr_warning("%s: failed to read PCB on interrupt\n", dev->name); - adapter_reset(dev); - } - } - - } while (icount++ < 5 && (inb_status(dev->base_addr) & (ACRF | DONE))); - - prime_rx(dev); - - /* - * indicate no longer in interrupt routine - */ - spin_unlock(&adapter->lock); - return IRQ_HANDLED; -} - - -/****************************************************** - * - * open the board - * - ******************************************************/ - -static int elp_open(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - int retval; - - if (elp_debug >= 3) - pr_debug("%s: request to open device\n", dev->name); - - /* - * make sure we actually found the device - */ - if (adapter == NULL) { - pr_err("%s: Opening a non-existent physical device\n", dev->name); - return -EAGAIN; - } - /* - * disable interrupts on the board - */ - outb_control(0, dev); - - /* - * clear any pending interrupts - */ - inb_command(dev->base_addr); - adapter_reset(dev); - - /* - * no receive PCBs active - */ - adapter->rx_active = 0; - - adapter->busy = 0; - adapter->send_pcb_semaphore = 0; - adapter->rx_backlog.in = 0; - adapter->rx_backlog.out = 0; - - spin_lock_init(&adapter->lock); - - /* - * install our interrupt service routine - */ - if ((retval = request_irq(dev->irq, elp_interrupt, 0, dev->name, dev))) { - pr_err("%s: could not allocate IRQ%d\n", dev->name, dev->irq); - return retval; - } - if ((retval = request_dma(dev->dma, dev->name))) { - free_irq(dev->irq, dev); - pr_err("%s: could not allocate DMA%d channel\n", dev->name, dev->dma); - return retval; - } - adapter->dma_buffer = (void *) dma_mem_alloc(DMA_BUFFER_SIZE); - if (!adapter->dma_buffer) { - pr_err("%s: could not allocate DMA buffer\n", dev->name); - free_dma(dev->dma); - free_irq(dev->irq, dev); - return -ENOMEM; - } - adapter->dmaing = 0; - - /* - * enable interrupts on the board - */ - outb_control(CMDE, dev); - - /* - * configure adapter memory: we need 10 multicast addresses, default==0 - */ - if (elp_debug >= 3) - pr_debug("%s: sending 3c505 memory configuration command\n", dev->name); - adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY; - adapter->tx_pcb.data.memconf.cmd_q = 10; - adapter->tx_pcb.data.memconf.rcv_q = 20; - adapter->tx_pcb.data.memconf.mcast = 10; - adapter->tx_pcb.data.memconf.frame = 20; - adapter->tx_pcb.data.memconf.rcv_b = 20; - adapter->tx_pcb.data.memconf.progs = 0; - adapter->tx_pcb.length = sizeof(struct Memconf); - adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - pr_err("%s: couldn't send memory configuration command\n", dev->name); - else { - unsigned long timeout = jiffies + TIMEOUT; - while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) - TIMEOUT_MSG(__LINE__); - } - - - /* - * configure adapter to receive broadcast messages and wait for response - */ - if (elp_debug >= 3) - pr_debug("%s: sending 82586 configure command\n", dev->name); - adapter->tx_pcb.command = CMD_CONFIGURE_82586; - adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD; - adapter->tx_pcb.length = 2; - adapter->got[CMD_CONFIGURE_82586] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - pr_err("%s: couldn't send 82586 configure command\n", dev->name); - else { - unsigned long timeout = jiffies + TIMEOUT; - while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) - TIMEOUT_MSG(__LINE__); - } - - /* enable burst-mode DMA */ - /* outb(0x1, dev->base_addr + PORT_AUXDMA); */ - - /* - * queue receive commands to provide buffering - */ - prime_rx(dev); - if (elp_debug >= 3) - pr_debug("%s: %d receive PCBs active\n", dev->name, adapter->rx_active); - - /* - * device is now officially open! - */ - - netif_start_queue(dev); - return 0; -} - - -/****************************************************** - * - * send a packet to the adapter - * - ******************************************************/ - -static netdev_tx_t send_packet(struct net_device *dev, struct sk_buff *skb) -{ - elp_device *adapter = netdev_priv(dev); - unsigned long target; - unsigned long flags; - - /* - * make sure the length is even and no shorter than 60 bytes - */ - unsigned int nlen = (((skb->len < 60) ? 60 : skb->len) + 1) & (~1); - - if (test_and_set_bit(0, (void *) &adapter->busy)) { - if (elp_debug >= 2) - pr_debug("%s: transmit blocked\n", dev->name); - return false; - } - - dev->stats.tx_bytes += nlen; - - /* - * send the adapter a transmit packet command. Ignore segment and offset - * and make sure the length is even - */ - adapter->tx_pcb.command = CMD_TRANSMIT_PACKET; - adapter->tx_pcb.length = sizeof(struct Xmit_pkt); - adapter->tx_pcb.data.xmit_pkt.buf_ofs - = adapter->tx_pcb.data.xmit_pkt.buf_seg = 0; /* Unused */ - adapter->tx_pcb.data.xmit_pkt.pkt_len = nlen; - - if (!send_pcb(dev, &adapter->tx_pcb)) { - adapter->busy = 0; - return false; - } - /* if this happens, we die */ - if (test_and_set_bit(0, (void *) &adapter->dmaing)) - pr_debug("%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction); - - adapter->current_dma.direction = 1; - adapter->current_dma.start_time = jiffies; - - if ((unsigned long)(skb->data + nlen) >= MAX_DMA_ADDRESS || nlen != skb->len) { - skb_copy_from_linear_data(skb, adapter->dma_buffer, nlen); - memset(adapter->dma_buffer+skb->len, 0, nlen-skb->len); - target = isa_virt_to_bus(adapter->dma_buffer); - } - else { - target = isa_virt_to_bus(skb->data); - } - adapter->current_dma.skb = skb; - - flags=claim_dma_lock(); - disable_dma(dev->dma); - clear_dma_ff(dev->dma); - set_dma_mode(dev->dma, 0x48); /* dma memory -> io */ - set_dma_addr(dev->dma, target); - set_dma_count(dev->dma, nlen); - outb_control(adapter->hcr_val | DMAE | TCEN, dev); - enable_dma(dev->dma); - release_dma_lock(flags); - - if (elp_debug >= 3) - pr_debug("%s: DMA transfer started\n", dev->name); - - return true; -} - -/* - * The upper layer thinks we timed out - */ - -static void elp_timeout(struct net_device *dev) -{ - int stat; - - stat = inb_status(dev->base_addr); - pr_warning("%s: transmit timed out, lost %s?\n", dev->name, - (stat & ACRF) ? "interrupt" : "command"); - if (elp_debug >= 1) - pr_debug("%s: status %#02x\n", dev->name, stat); - dev->trans_start = jiffies; /* prevent tx timeout */ - dev->stats.tx_dropped++; - netif_wake_queue(dev); -} - -/****************************************************** - * - * start the transmitter - * return 0 if sent OK, else return 1 - * - ******************************************************/ - -static netdev_tx_t elp_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - unsigned long flags; - elp_device *adapter = netdev_priv(dev); - - spin_lock_irqsave(&adapter->lock, flags); - check_3c505_dma(dev); - - if (elp_debug >= 3) - pr_debug("%s: request to send packet of length %d\n", dev->name, (int) skb->len); - - netif_stop_queue(dev); - - /* - * send the packet at skb->data for skb->len - */ - if (!send_packet(dev, skb)) { - if (elp_debug >= 2) { - pr_debug("%s: failed to transmit packet\n", dev->name); - } - spin_unlock_irqrestore(&adapter->lock, flags); - return NETDEV_TX_BUSY; - } - if (elp_debug >= 3) - pr_debug("%s: packet of length %d sent\n", dev->name, (int) skb->len); - - prime_rx(dev); - spin_unlock_irqrestore(&adapter->lock, flags); - netif_start_queue(dev); - return NETDEV_TX_OK; -} - -/****************************************************** - * - * return statistics on the board - * - ******************************************************/ - -static struct net_device_stats *elp_get_stats(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - - if (elp_debug >= 3) - pr_debug("%s: request for stats\n", dev->name); - - /* If the device is closed, just return the latest stats we have, - - we cannot ask from the adapter without interrupts */ - if (!netif_running(dev)) - return &dev->stats; - - /* send a get statistics command to the board */ - adapter->tx_pcb.command = CMD_NETWORK_STATISTICS; - adapter->tx_pcb.length = 0; - adapter->got[CMD_NETWORK_STATISTICS] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - pr_err("%s: couldn't send get statistics command\n", dev->name); - else { - unsigned long timeout = jiffies + TIMEOUT; - while (adapter->got[CMD_NETWORK_STATISTICS] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) { - TIMEOUT_MSG(__LINE__); - return &dev->stats; - } - } - - /* statistics are now up to date */ - return &dev->stats; -} - - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); - strlcpy(info->version, DRV_VERSION, sizeof(info->version)); - snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", - dev->base_addr); -} - -static u32 netdev_get_msglevel(struct net_device *dev) -{ - return debug; -} - -static void netdev_set_msglevel(struct net_device *dev, u32 level) -{ - debug = level; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, - .get_msglevel = netdev_get_msglevel, - .set_msglevel = netdev_set_msglevel, -}; - -/****************************************************** - * - * close the board - * - ******************************************************/ - -static int elp_close(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - - if (elp_debug >= 3) - pr_debug("%s: request to close device\n", dev->name); - - netif_stop_queue(dev); - - /* Someone may request the device statistic information even when - * the interface is closed. The following will update the statistics - * structure in the driver, so we'll be able to give current statistics. - */ - (void) elp_get_stats(dev); - - /* - * disable interrupts on the board - */ - outb_control(0, dev); - - /* - * release the IRQ - */ - free_irq(dev->irq, dev); - - free_dma(dev->dma); - free_pages((unsigned long) adapter->dma_buffer, get_order(DMA_BUFFER_SIZE)); - - return 0; -} - - -/************************************************************ - * - * Set multicast list - * num_addrs==0: clear mc_list - * num_addrs==-1: set promiscuous mode - * num_addrs>0: set mc_list - * - ************************************************************/ - -static void elp_set_mc_list(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - struct netdev_hw_addr *ha; - int i; - unsigned long flags; - - if (elp_debug >= 3) - pr_debug("%s: request to set multicast list\n", dev->name); - - spin_lock_irqsave(&adapter->lock, flags); - - if (!(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) { - /* send a "load multicast list" command to the board, max 10 addrs/cmd */ - /* if num_addrs==0 the list will be cleared */ - adapter->tx_pcb.command = CMD_LOAD_MULTICAST_LIST; - adapter->tx_pcb.length = 6 * netdev_mc_count(dev); - i = 0; - netdev_for_each_mc_addr(ha, dev) - memcpy(adapter->tx_pcb.data.multicast[i++], - ha->addr, 6); - adapter->got[CMD_LOAD_MULTICAST_LIST] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - pr_err("%s: couldn't send set_multicast command\n", dev->name); - else { - unsigned long timeout = jiffies + TIMEOUT; - while (adapter->got[CMD_LOAD_MULTICAST_LIST] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) { - TIMEOUT_MSG(__LINE__); - } - } - if (!netdev_mc_empty(dev)) - adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD | RECV_MULTI; - else /* num_addrs == 0 */ - adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD; - } else - adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_PROMISC; - /* - * configure adapter to receive messages (as specified above) - * and wait for response - */ - if (elp_debug >= 3) - pr_debug("%s: sending 82586 configure command\n", dev->name); - adapter->tx_pcb.command = CMD_CONFIGURE_82586; - adapter->tx_pcb.length = 2; - adapter->got[CMD_CONFIGURE_82586] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - { - spin_unlock_irqrestore(&adapter->lock, flags); - pr_err("%s: couldn't send 82586 configure command\n", dev->name); - } - else { - unsigned long timeout = jiffies + TIMEOUT; - spin_unlock_irqrestore(&adapter->lock, flags); - while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) - TIMEOUT_MSG(__LINE__); - } -} - -/************************************************************ - * - * A couple of tests to see if there's 3C505 or not - * Called only by elp_autodetect - ************************************************************/ - -static int __init elp_sense(struct net_device *dev) -{ - int addr = dev->base_addr; - const char *name = dev->name; - byte orig_HSR; - - if (!request_region(addr, ELP_IO_EXTENT, "3c505")) - return -ENODEV; - - orig_HSR = inb_status(addr); - - if (elp_debug > 0) - pr_debug(search_msg, name, addr); - - if (orig_HSR == 0xff) { - if (elp_debug > 0) - pr_cont(notfound_msg, 1); - goto out; - } - - /* Wait for a while; the adapter may still be booting up */ - if (elp_debug > 0) - pr_cont(stilllooking_msg); - - if (orig_HSR & DIR) { - /* If HCR.DIR is up, we pull it down. HSR.DIR should follow. */ - outb(0, dev->base_addr + PORT_CONTROL); - msleep(300); - if (inb_status(addr) & DIR) { - if (elp_debug > 0) - pr_cont(notfound_msg, 2); - goto out; - } - } else { - /* If HCR.DIR is down, we pull it up. HSR.DIR should follow. */ - outb(DIR, dev->base_addr + PORT_CONTROL); - msleep(300); - if (!(inb_status(addr) & DIR)) { - if (elp_debug > 0) - pr_cont(notfound_msg, 3); - goto out; - } - } - /* - * It certainly looks like a 3c505. - */ - if (elp_debug > 0) - pr_cont(found_msg); - - return 0; -out: - release_region(addr, ELP_IO_EXTENT); - return -ENODEV; -} - -/************************************************************* - * - * Search through addr_list[] and try to find a 3C505 - * Called only by eplus_probe - *************************************************************/ - -static int __init elp_autodetect(struct net_device *dev) -{ - int idx = 0; - - /* if base address set, then only check that address - otherwise, run through the table */ - if (dev->base_addr != 0) { /* dev->base_addr == 0 ==> plain autodetect */ - if (elp_sense(dev) == 0) - return dev->base_addr; - } else - while ((dev->base_addr = addr_list[idx++])) { - if (elp_sense(dev) == 0) - return dev->base_addr; - } - - /* could not find an adapter */ - if (elp_debug > 0) - pr_debug(couldnot_msg, dev->name); - - return 0; /* Because of this, the layer above will return -ENODEV */ -} - -static const struct net_device_ops elp_netdev_ops = { - .ndo_open = elp_open, - .ndo_stop = elp_close, - .ndo_get_stats = elp_get_stats, - .ndo_start_xmit = elp_start_xmit, - .ndo_tx_timeout = elp_timeout, - .ndo_set_rx_mode = elp_set_mc_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/****************************************************** - * - * probe for an Etherlink Plus board at the specified address - * - ******************************************************/ - -/* There are three situations we need to be able to detect here: - - * a) the card is idle - * b) the card is still booting up - * c) the card is stuck in a strange state (some DOS drivers do this) - * - * In case (a), all is well. In case (b), we wait 10 seconds to see if the - * card finishes booting, and carry on if so. In case (c), we do a hard reset, - * loop round, and hope for the best. - * - * This is all very unpleasant, but hopefully avoids the problems with the old - * probe code (which had a 15-second delay if the card was idle, and didn't - * work at all if it was in a weird state). - */ - -static int __init elplus_setup(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - int i, tries, tries1, okay; - unsigned long timeout; - unsigned long cookie = 0; - int err = -ENODEV; - - /* - * setup adapter structure - */ - - dev->base_addr = elp_autodetect(dev); - if (!dev->base_addr) - return -ENODEV; - - adapter->send_pcb_semaphore = 0; - - for (tries1 = 0; tries1 < 3; tries1++) { - outb_control((adapter->hcr_val | CMDE) & ~DIR, dev); - /* First try to write just one byte, to see if the card is - * responding at all normally. - */ - timeout = jiffies + 5*HZ/100; - okay = 0; - while (time_before(jiffies, timeout) && !(inb_status(dev->base_addr) & HCRE)); - if ((inb_status(dev->base_addr) & HCRE)) { - outb_command(0, dev->base_addr); /* send a spurious byte */ - timeout = jiffies + 5*HZ/100; - while (time_before(jiffies, timeout) && !(inb_status(dev->base_addr) & HCRE)); - if (inb_status(dev->base_addr) & HCRE) - okay = 1; - } - if (!okay) { - /* Nope, it's ignoring the command register. This means that - * either it's still booting up, or it's died. - */ - pr_err("%s: command register wouldn't drain, ", dev->name); - if ((inb_status(dev->base_addr) & 7) == 3) { - /* If the adapter status is 3, it *could* still be booting. - * Give it the benefit of the doubt for 10 seconds. - */ - pr_cont("assuming 3c505 still starting\n"); - timeout = jiffies + 10*HZ; - while (time_before(jiffies, timeout) && (inb_status(dev->base_addr) & 7)); - if (inb_status(dev->base_addr) & 7) { - pr_err("%s: 3c505 failed to start\n", dev->name); - } else { - okay = 1; /* It started */ - } - } else { - /* Otherwise, it must just be in a strange - * state. We probably need to kick it. - */ - pr_cont("3c505 is sulking\n"); - } - } - for (tries = 0; tries < 5 && okay; tries++) { - - /* - * Try to set the Ethernet address, to make sure that the board - * is working. - */ - adapter->tx_pcb.command = CMD_STATION_ADDRESS; - adapter->tx_pcb.length = 0; - cookie = probe_irq_on(); - if (!send_pcb(dev, &adapter->tx_pcb)) { - pr_err("%s: could not send first PCB\n", dev->name); - probe_irq_off(cookie); - continue; - } - if (!receive_pcb(dev, &adapter->rx_pcb)) { - pr_err("%s: could not read first PCB\n", dev->name); - probe_irq_off(cookie); - continue; - } - if ((adapter->rx_pcb.command != CMD_ADDRESS_RESPONSE) || - (adapter->rx_pcb.length != 6)) { - pr_err("%s: first PCB wrong (%d, %d)\n", dev->name, - adapter->rx_pcb.command, adapter->rx_pcb.length); - probe_irq_off(cookie); - continue; - } - goto okay; - } - /* It's broken. Do a hard reset to re-initialise the board, - * and try again. - */ - pr_info("%s: resetting adapter\n", dev->name); - outb_control(adapter->hcr_val | FLSH | ATTN, dev); - outb_control(adapter->hcr_val & ~(FLSH | ATTN), dev); - } - pr_err("%s: failed to initialise 3c505\n", dev->name); - goto out; - - okay: - if (dev->irq) { /* Is there a preset IRQ? */ - int rpt = probe_irq_off(cookie); - if (dev->irq != rpt) { - pr_warning("%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt); - } - /* if dev->irq == probe_irq_off(cookie), all is well */ - } else /* No preset IRQ; just use what we can detect */ - dev->irq = probe_irq_off(cookie); - switch (dev->irq) { /* Legal, sane? */ - case 0: - pr_err("%s: IRQ probe failed: check 3c505 jumpers.\n", - dev->name); - goto out; - case 1: - case 6: - case 8: - case 13: - pr_err("%s: Impossible IRQ %d reported by probe_irq_off().\n", - dev->name, dev->irq); - goto out; - } - /* - * Now we have the IRQ number so we can disable the interrupts from - * the board until the board is opened. - */ - outb_control(adapter->hcr_val & ~CMDE, dev); - - /* - * copy Ethernet address into structure - */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = adapter->rx_pcb.data.eth_addr[i]; - - /* find a DMA channel */ - if (!dev->dma) { - if (dev->mem_start) { - dev->dma = dev->mem_start & 7; - } - else { - pr_warning("%s: warning, DMA channel not specified, using default\n", dev->name); - dev->dma = ELP_DMA; - } - } - - /* - * print remainder of startup message - */ - pr_info("%s: 3c505 at %#lx, irq %d, dma %d, addr %pM, ", - dev->name, dev->base_addr, dev->irq, dev->dma, dev->dev_addr); - /* - * read more information from the adapter - */ - - adapter->tx_pcb.command = CMD_ADAPTER_INFO; - adapter->tx_pcb.length = 0; - if (!send_pcb(dev, &adapter->tx_pcb) || - !receive_pcb(dev, &adapter->rx_pcb) || - (adapter->rx_pcb.command != CMD_ADAPTER_INFO_RESPONSE) || - (adapter->rx_pcb.length != 10)) { - pr_cont("not responding to second PCB\n"); - } - pr_cont("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers, - adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz); - - /* - * reconfigure the adapter memory to better suit our purposes - */ - adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY; - adapter->tx_pcb.length = 12; - adapter->tx_pcb.data.memconf.cmd_q = 8; - adapter->tx_pcb.data.memconf.rcv_q = 8; - adapter->tx_pcb.data.memconf.mcast = 10; - adapter->tx_pcb.data.memconf.frame = 10; - adapter->tx_pcb.data.memconf.rcv_b = 10; - adapter->tx_pcb.data.memconf.progs = 0; - if (!send_pcb(dev, &adapter->tx_pcb) || - !receive_pcb(dev, &adapter->rx_pcb) || - (adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) || - (adapter->rx_pcb.length != 2)) { - pr_err("%s: could not configure adapter memory\n", dev->name); - } - if (adapter->rx_pcb.data.configure) { - pr_err("%s: adapter configuration failed\n", dev->name); - } - - dev->netdev_ops = &elp_netdev_ops; - dev->watchdog_timeo = 10*HZ; - dev->ethtool_ops = &netdev_ethtool_ops; /* local */ - - dev->mem_start = dev->mem_end = 0; - - err = register_netdev(dev); - if (err) - goto out; - - return 0; -out: - release_region(dev->base_addr, ELP_IO_EXTENT); - return err; -} - -#ifndef MODULE -struct net_device * __init elplus_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(elp_device)); - int err; - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = elplus_setup(dev); - if (err) { - free_netdev(dev); - return ERR_PTR(err); - } - return dev; -} - -#else -static struct net_device *dev_3c505[ELP_MAX_CARDS]; -static int io[ELP_MAX_CARDS]; -static int irq[ELP_MAX_CARDS]; -static int dma[ELP_MAX_CARDS]; -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(dma, int, NULL, 0); -MODULE_PARM_DESC(io, "EtherLink Plus I/O base address(es)"); -MODULE_PARM_DESC(irq, "EtherLink Plus IRQ number(s) (assigned)"); -MODULE_PARM_DESC(dma, "EtherLink Plus DMA channel(s)"); - -int __init init_module(void) -{ - int this_dev, found = 0; - - for (this_dev = 0; this_dev < ELP_MAX_CARDS; this_dev++) { - struct net_device *dev = alloc_etherdev(sizeof(elp_device)); - if (!dev) - break; - - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - if (dma[this_dev]) { - dev->dma = dma[this_dev]; - } else { - dev->dma = ELP_DMA; - pr_warning("3c505.c: warning, using default DMA channel,\n"); - } - if (io[this_dev] == 0) { - if (this_dev) { - free_netdev(dev); - break; - } - pr_notice("3c505.c: module autoprobe not recommended, give io=xx.\n"); - } - if (elplus_setup(dev) != 0) { - pr_warning("3c505.c: Failed to register card at 0x%x.\n", io[this_dev]); - free_netdev(dev); - break; - } - dev_3c505[this_dev] = dev; - found++; - } - if (!found) - return -ENODEV; - return 0; -} - -void __exit cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < ELP_MAX_CARDS; this_dev++) { - struct net_device *dev = dev_3c505[this_dev]; - if (dev) { - unregister_netdev(dev); - release_region(dev->base_addr, ELP_IO_EXTENT); - free_netdev(dev); - } - } -} - -#endif /* MODULE */ -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/i825xx/3c505.h b/drivers/net/ethernet/i825xx/3c505.h deleted file mode 100644 index 04df2a9..0000000 --- a/drivers/net/ethernet/i825xx/3c505.h +++ /dev/null @@ -1,292 +0,0 @@ -/***************************************************************** - * - * defines for 3Com Etherlink Plus adapter - * - *****************************************************************/ - -#define ELP_DMA 6 -#define ELP_RX_PCBS 4 -#define ELP_MAX_CARDS 4 - -/* - * I/O register offsets - */ -#define PORT_COMMAND 0x00 /* read/write, 8-bit */ -#define PORT_STATUS 0x02 /* read only, 8-bit */ -#define PORT_AUXDMA 0x02 /* write only, 8-bit */ -#define PORT_DATA 0x04 /* read/write, 16-bit */ -#define PORT_CONTROL 0x06 /* read/write, 8-bit */ - -#define ELP_IO_EXTENT 0x10 /* size of used IO registers */ - -/* - * host control registers bits - */ -#define ATTN 0x80 /* attention */ -#define FLSH 0x40 /* flush data register */ -#define DMAE 0x20 /* DMA enable */ -#define DIR 0x10 /* direction */ -#define TCEN 0x08 /* terminal count interrupt enable */ -#define CMDE 0x04 /* command register interrupt enable */ -#define HSF2 0x02 /* host status flag 2 */ -#define HSF1 0x01 /* host status flag 1 */ - -/* - * combinations of HSF flags used for PCB transmission - */ -#define HSF_PCB_ACK HSF1 -#define HSF_PCB_NAK HSF2 -#define HSF_PCB_END (HSF2|HSF1) -#define HSF_PCB_MASK (HSF2|HSF1) - -/* - * host status register bits - */ -#define HRDY 0x80 /* data register ready */ -#define HCRE 0x40 /* command register empty */ -#define ACRF 0x20 /* adapter command register full */ -/* #define DIR 0x10 direction - same as in control register */ -#define DONE 0x08 /* DMA done */ -#define ASF3 0x04 /* adapter status flag 3 */ -#define ASF2 0x02 /* adapter status flag 2 */ -#define ASF1 0x01 /* adapter status flag 1 */ - -/* - * combinations of ASF flags used for PCB reception - */ -#define ASF_PCB_ACK ASF1 -#define ASF_PCB_NAK ASF2 -#define ASF_PCB_END (ASF2|ASF1) -#define ASF_PCB_MASK (ASF2|ASF1) - -/* - * host aux DMA register bits - */ -#define DMA_BRST 0x01 /* DMA burst */ - -/* - * maximum amount of data allowed in a PCB - */ -#define MAX_PCB_DATA 62 - -/***************************************************************** - * - * timeout value - * this is a rough value used for loops to stop them from - * locking up the whole machine in the case of failure or - * error conditions - * - *****************************************************************/ - -#define TIMEOUT 300 - -/***************************************************************** - * - * PCB commands - * - *****************************************************************/ - -enum { - /* - * host PCB commands - */ - CMD_CONFIGURE_ADAPTER_MEMORY = 0x01, - CMD_CONFIGURE_82586 = 0x02, - CMD_STATION_ADDRESS = 0x03, - CMD_DMA_DOWNLOAD = 0x04, - CMD_DMA_UPLOAD = 0x05, - CMD_PIO_DOWNLOAD = 0x06, - CMD_PIO_UPLOAD = 0x07, - CMD_RECEIVE_PACKET = 0x08, - CMD_TRANSMIT_PACKET = 0x09, - CMD_NETWORK_STATISTICS = 0x0a, - CMD_LOAD_MULTICAST_LIST = 0x0b, - CMD_CLEAR_PROGRAM = 0x0c, - CMD_DOWNLOAD_PROGRAM = 0x0d, - CMD_EXECUTE_PROGRAM = 0x0e, - CMD_SELF_TEST = 0x0f, - CMD_SET_STATION_ADDRESS = 0x10, - CMD_ADAPTER_INFO = 0x11, - NUM_TRANSMIT_CMDS, - - /* - * adapter PCB commands - */ - CMD_CONFIGURE_ADAPTER_RESPONSE = 0x31, - CMD_CONFIGURE_82586_RESPONSE = 0x32, - CMD_ADDRESS_RESPONSE = 0x33, - CMD_DOWNLOAD_DATA_REQUEST = 0x34, - CMD_UPLOAD_DATA_REQUEST = 0x35, - CMD_RECEIVE_PACKET_COMPLETE = 0x38, - CMD_TRANSMIT_PACKET_COMPLETE = 0x39, - CMD_NETWORK_STATISTICS_RESPONSE = 0x3a, - CMD_LOAD_MULTICAST_RESPONSE = 0x3b, - CMD_CLEAR_PROGRAM_RESPONSE = 0x3c, - CMD_DOWNLOAD_PROGRAM_RESPONSE = 0x3d, - CMD_EXECUTE_RESPONSE = 0x3e, - CMD_SELF_TEST_RESPONSE = 0x3f, - CMD_SET_ADDRESS_RESPONSE = 0x40, - CMD_ADAPTER_INFO_RESPONSE = 0x41 -}; - -/* Definitions for the PCB data structure */ - -/* Data units */ -typedef unsigned char byte; -typedef unsigned short int word; -typedef unsigned long int dword; - -/* Data structures */ -struct Memconf { - word cmd_q, - rcv_q, - mcast, - frame, - rcv_b, - progs; -}; - -struct Rcv_pkt { - word buf_ofs, - buf_seg, - buf_len, - timeout; -}; - -struct Xmit_pkt { - word buf_ofs, - buf_seg, - pkt_len; -}; - -struct Rcv_resp { - word buf_ofs, - buf_seg, - buf_len, - pkt_len, - timeout, - status; - dword timetag; -}; - -struct Xmit_resp { - word buf_ofs, - buf_seg, - c_stat, - status; -}; - - -struct Netstat { - dword tot_recv, - tot_xmit; - word err_CRC, - err_align, - err_res, - err_ovrrun; -}; - - -struct Selftest { - word error; - union { - word ROM_cksum; - struct { - word ofs, seg; - } RAM; - word i82586; - } failure; -}; - -struct Info { - byte minor_vers, - major_vers; - word ROM_cksum, - RAM_sz, - free_ofs, - free_seg; -}; - -struct Memdump { - word size, - off, - seg; -}; - -/* -Primary Command Block. The most important data structure. All communication -between the host and the adapter is done with these. (Except for the actual -Ethernet data, which has different packaging.) -*/ -typedef struct { - byte command; - byte length; - union { - struct Memconf memconf; - word configure; - struct Rcv_pkt rcv_pkt; - struct Xmit_pkt xmit_pkt; - byte multicast[10][6]; - byte eth_addr[6]; - byte failed; - struct Rcv_resp rcv_resp; - struct Xmit_resp xmit_resp; - struct Netstat netstat; - struct Selftest selftest; - struct Info info; - struct Memdump memdump; - byte raw[62]; - } data; -} pcb_struct; - -/* These defines for 'configure' */ -#define RECV_STATION 0x00 -#define RECV_BROAD 0x01 -#define RECV_MULTI 0x02 -#define RECV_PROMISC 0x04 -#define NO_LOOPBACK 0x00 -#define INT_LOOPBACK 0x08 -#define EXT_LOOPBACK 0x10 - -/***************************************************************** - * - * structure to hold context information for adapter - * - *****************************************************************/ - -#define DMA_BUFFER_SIZE 1600 -#define BACKLOG_SIZE 4 - -typedef struct { - volatile short got[NUM_TRANSMIT_CMDS]; /* flags for - command completion */ - pcb_struct tx_pcb; /* PCB for foreground sending */ - pcb_struct rx_pcb; /* PCB for foreground receiving */ - pcb_struct itx_pcb; /* PCB for background sending */ - pcb_struct irx_pcb; /* PCB for background receiving */ - - void *dma_buffer; - - struct { - unsigned int length[BACKLOG_SIZE]; - unsigned int in; - unsigned int out; - } rx_backlog; - - struct { - unsigned int direction; - unsigned int length; - struct sk_buff *skb; - void *target; - unsigned long start_time; - } current_dma; - - /* flags */ - unsigned long send_pcb_semaphore; - unsigned long dmaing; - unsigned long busy; - - unsigned int rx_active; /* number of receive PCBs */ - volatile unsigned char hcr_val; /* what we think the HCR contains */ - spinlock_t lock; /* Interrupt v tx lock */ -} elp_device; diff --git a/drivers/net/ethernet/i825xx/3c507.c b/drivers/net/ethernet/i825xx/3c507.c deleted file mode 100644 index 13983ee..0000000 --- a/drivers/net/ethernet/i825xx/3c507.c +++ /dev/null @@ -1,939 +0,0 @@ -/* 3c507.c: An EtherLink16 device driver for Linux. */ -/* - Written 1993,1994 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - - Thanks go to jennings@Montrouge.SMR.slb.com ( Patrick Jennings) - and jrs@world.std.com (Rick Sladkey) for testing and bugfixes. - Mark Salazar <leslie@access.digex.net> made the changes for cards with - only 16K packet buffers. - - Things remaining to do: - Verify that the tx and rx buffers don't have fencepost errors. - Move the theory of operation and memory map documentation. - The statistics need to be updated correctly. -*/ - -#define DRV_NAME "3c507" -#define DRV_VERSION "1.10a" -#define DRV_RELDATE "11/17/2001" - -static const char version[] = - DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Donald Becker (becker@scyld.com)\n"; - -/* - Sources: - This driver wouldn't have been written with the availability of the - Crynwr driver source code. It provided a known-working implementation - that filled in the gaping holes of the Intel documentation. Three cheers - for Russ Nelson. - - Intel Microcommunications Databook, Vol. 1, 1990. It provides just enough - info that the casual reader might think that it documents the i82586 :-<. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/string.h> -#include <linux/spinlock.h> -#include <linux/ethtool.h> -#include <linux/errno.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/if_ether.h> -#include <linux/skbuff.h> -#include <linux/init.h> -#include <linux/bitops.h> - -#include <asm/dma.h> -#include <asm/io.h> -#include <asm/uaccess.h> - -/* use 0 for production, 1 for verification, 2..7 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 1 -#endif -static unsigned int net_debug = NET_DEBUG; -#define debug net_debug - - -/* - Details of the i82586. - - You'll really need the databook to understand the details of this part, - but the outline is that the i82586 has two separate processing units. - Both are started from a list of three configuration tables, of which only - the last, the System Control Block (SCB), is used after reset-time. The SCB - has the following fields: - Status word - Command word - Tx/Command block addr. - Rx block addr. - The command word accepts the following controls for the Tx and Rx units: - */ - -#define CUC_START 0x0100 -#define CUC_RESUME 0x0200 -#define CUC_SUSPEND 0x0300 -#define RX_START 0x0010 -#define RX_RESUME 0x0020 -#define RX_SUSPEND 0x0030 - -/* The Rx unit uses a list of frame descriptors and a list of data buffer - descriptors. We use full-sized (1518 byte) data buffers, so there is - a one-to-one pairing of frame descriptors to buffer descriptors. - - The Tx ("command") unit executes a list of commands that look like: - Status word Written by the 82586 when the command is done. - Command word Command in lower 3 bits, post-command action in upper 3 - Link word The address of the next command. - Parameters (as needed). - - Some definitions related to the Command Word are: - */ -#define CMD_EOL 0x8000 /* The last command of the list, stop. */ -#define CMD_SUSP 0x4000 /* Suspend after doing cmd. */ -#define CMD_INTR 0x2000 /* Interrupt after doing cmd. */ - -enum commands { - CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3, - CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7}; - -/* Information that need to be kept for each board. */ -struct net_local { - int last_restart; - ushort rx_head; - ushort rx_tail; - ushort tx_head; - ushort tx_cmd_link; - ushort tx_reap; - ushort tx_pkts_in_ring; - spinlock_t lock; - void __iomem *base; -}; - -/* - Details of the EtherLink16 Implementation - The 3c507 is a generic shared-memory i82586 implementation. - The host can map 16K, 32K, 48K, or 64K of the 64K memory into - 0x0[CD][08]0000, or all 64K into 0xF[02468]0000. - */ - -/* Offsets from the base I/O address. */ -#define SA_DATA 0 /* Station address data, or 3Com signature. */ -#define MISC_CTRL 6 /* Switch the SA_DATA banks, and bus config bits. */ -#define RESET_IRQ 10 /* Reset the latched IRQ line. */ -#define SIGNAL_CA 11 /* Frob the 82586 Channel Attention line. */ -#define ROM_CONFIG 13 -#define MEM_CONFIG 14 -#define IRQ_CONFIG 15 -#define EL16_IO_EXTENT 16 - -/* The ID port is used at boot-time to locate the ethercard. */ -#define ID_PORT 0x100 - -/* Offsets to registers in the mailbox (SCB). */ -#define iSCB_STATUS 0x8 -#define iSCB_CMD 0xA -#define iSCB_CBL 0xC /* Command BLock offset. */ -#define iSCB_RFA 0xE /* Rx Frame Area offset. */ - -/* Since the 3c507 maps the shared memory window so that the last byte is - at 82586 address FFFF, the first byte is at 82586 address 0, 16K, 32K, or - 48K corresponding to window sizes of 64K, 48K, 32K and 16K respectively. - We can account for this be setting the 'SBC Base' entry in the ISCP table - below for all the 16 bit offset addresses, and also adding the 'SCB Base' - value to all 24 bit physical addresses (in the SCP table and the TX and RX - Buffer Descriptors). - -Mark - */ -#define SCB_BASE ((unsigned)64*1024 - (dev->mem_end - dev->mem_start)) - -/* - What follows in 'init_words[]' is the "program" that is downloaded to the - 82586 memory. It's mostly tables and command blocks, and starts at the - reset address 0xfffff6. This is designed to be similar to the EtherExpress, - thus the unusual location of the SCB at 0x0008. - - Even with the additional "don't care" values, doing it this way takes less - program space than initializing the individual tables, and I feel it's much - cleaner. - - The databook is particularly useless for the first two structures, I had - to use the Crynwr driver as an example. - - The memory setup is as follows: - */ - -#define CONFIG_CMD 0x0018 -#define SET_SA_CMD 0x0024 -#define SA_OFFSET 0x002A -#define IDLELOOP 0x30 -#define TDR_CMD 0x38 -#define TDR_TIME 0x3C -#define DUMP_CMD 0x40 -#define DIAG_CMD 0x48 -#define SET_MC_CMD 0x4E -#define DUMP_DATA 0x56 /* A 170 byte buffer for dump and Set-MC into. */ - -#define TX_BUF_START 0x0100 -#define NUM_TX_BUFS 5 -#define TX_BUF_SIZE (1518+14+20+16) /* packet+header+TBD */ - -#define RX_BUF_START 0x2000 -#define RX_BUF_SIZE (1518+14+18) /* packet+header+RBD */ -#define RX_BUF_END (dev->mem_end - dev->mem_start) - -#define TX_TIMEOUT (HZ/20) - -/* - That's it: only 86 bytes to set up the beast, including every extra - command available. The 170 byte buffer at DUMP_DATA is shared between the - Dump command (called only by the diagnostic program) and the SetMulticastList - command. - - To complete the memory setup you only have to write the station address at - SA_OFFSET and create the Tx & Rx buffer lists. - - The Tx command chain and buffer list is setup as follows: - A Tx command table, with the data buffer pointing to... - A Tx data buffer descriptor. The packet is in a single buffer, rather than - chaining together several smaller buffers. - A NoOp command, which initially points to itself, - And the packet data. - - A transmit is done by filling in the Tx command table and data buffer, - re-writing the NoOp command, and finally changing the offset of the last - command to point to the current Tx command. When the Tx command is finished, - it jumps to the NoOp, when it loops until the next Tx command changes the - "link offset" in the NoOp. This way the 82586 never has to go through the - slow restart sequence. - - The Rx buffer list is set up in the obvious ring structure. We have enough - memory (and low enough interrupt latency) that we can avoid the complicated - Rx buffer linked lists by alway associating a full-size Rx data buffer with - each Rx data frame. - - I current use four transmit buffers starting at TX_BUF_START (0x0100), and - use the rest of memory, from RX_BUF_START to RX_BUF_END, for Rx buffers. - - */ - -static unsigned short init_words[] = { - /* System Configuration Pointer (SCP). */ - 0x0000, /* Set bus size to 16 bits. */ - 0,0, /* pad words. */ - 0x0000,0x0000, /* ISCP phys addr, set in init_82586_mem(). */ - - /* Intermediate System Configuration Pointer (ISCP). */ - 0x0001, /* Status word that's cleared when init is done. */ - 0x0008,0,0, /* SCB offset, (skip, skip) */ - - /* System Control Block (SCB). */ - 0,0xf000|RX_START|CUC_START, /* SCB status and cmd. */ - CONFIG_CMD, /* Command list pointer, points to Configure. */ - RX_BUF_START, /* Rx block list. */ - 0,0,0,0, /* Error count: CRC, align, buffer, overrun. */ - - /* 0x0018: Configure command. Change to put MAC data with packet. */ - 0, CmdConfigure, /* Status, command. */ - SET_SA_CMD, /* Next command is Set Station Addr. */ - 0x0804, /* "4" bytes of config data, 8 byte FIFO. */ - 0x2e40, /* Magic values, including MAC data location. */ - 0, /* Unused pad word. */ - - /* 0x0024: Setup station address command. */ - 0, CmdSASetup, - SET_MC_CMD, /* Next command. */ - 0xaa00,0xb000,0x0bad, /* Station address (to be filled in) */ - - /* 0x0030: NOP, looping back to itself. Point to first Tx buffer to Tx. */ - 0, CmdNOp, IDLELOOP, 0 /* pad */, - - /* 0x0038: A unused Time-Domain Reflectometer command. */ - 0, CmdTDR, IDLELOOP, 0, - - /* 0x0040: An unused Dump State command. */ - 0, CmdDump, IDLELOOP, DUMP_DATA, - - /* 0x0048: An unused Diagnose command. */ - 0, CmdDiagnose, IDLELOOP, - - /* 0x004E: An empty set-multicast-list command. */ - 0, CmdMulticastList, IDLELOOP, 0, -}; - -/* Index to functions, as function prototypes. */ - -static int el16_probe1(struct net_device *dev, int ioaddr); -static int el16_open(struct net_device *dev); -static netdev_tx_t el16_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t el16_interrupt(int irq, void *dev_id); -static void el16_rx(struct net_device *dev); -static int el16_close(struct net_device *dev); -static void el16_tx_timeout (struct net_device *dev); - -static void hardware_send_packet(struct net_device *dev, void *buf, short length, short pad); -static void init_82586_mem(struct net_device *dev); -static const struct ethtool_ops netdev_ethtool_ops; -static void init_rx_bufs(struct net_device *); - -static int io = 0x300; -static int irq; -static int mem_start; - - -/* Check for a network adaptor of this type, and return '0' iff one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - If dev->base_addr == 2, (detachable devices only) allocate space for the - device and return success. - */ - -struct net_device * __init el16_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - static const unsigned ports[] = { 0x300, 0x320, 0x340, 0x280, 0}; - const unsigned *port; - int err = -ENODEV; - - if (!dev) - return ERR_PTR(-ENODEV); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - mem_start = dev->mem_start & 15; - } - - if (io > 0x1ff) /* Check a single specified location. */ - err = el16_probe1(dev, io); - else if (io != 0) - err = -ENXIO; /* Don't probe at all. */ - else { - for (port = ports; *port; port++) { - err = el16_probe1(dev, *port); - if (!err) - break; - } - } - - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - free_irq(dev->irq, dev); - iounmap(((struct net_local *)netdev_priv(dev))->base); - release_region(dev->base_addr, EL16_IO_EXTENT); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static const struct net_device_ops netdev_ops = { - .ndo_open = el16_open, - .ndo_stop = el16_close, - .ndo_start_xmit = el16_send_packet, - .ndo_tx_timeout = el16_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init el16_probe1(struct net_device *dev, int ioaddr) -{ - static unsigned char init_ID_done; - int i, irq, irqval, retval; - struct net_local *lp; - - if (init_ID_done == 0) { - ushort lrs_state = 0xff; - /* Send the ID sequence to the ID_PORT to enable the board(s). */ - outb(0x00, ID_PORT); - for(i = 0; i < 255; i++) { - outb(lrs_state, ID_PORT); - lrs_state <<= 1; - if (lrs_state & 0x100) - lrs_state ^= 0xe7; - } - outb(0x00, ID_PORT); - init_ID_done = 1; - } - - if (!request_region(ioaddr, EL16_IO_EXTENT, DRV_NAME)) - return -ENODEV; - - if ((inb(ioaddr) != '*') || (inb(ioaddr + 1) != '3') || - (inb(ioaddr + 2) != 'C') || (inb(ioaddr + 3) != 'O')) { - retval = -ENODEV; - goto out; - } - - pr_info("%s: 3c507 at %#x,", dev->name, ioaddr); - - /* We should make a few more checks here, like the first three octets of - the S.A. for the manufacturer's code. */ - - irq = inb(ioaddr + IRQ_CONFIG) & 0x0f; - - irqval = request_irq(irq, el16_interrupt, 0, DRV_NAME, dev); - if (irqval) { - pr_cont("\n"); - pr_err("3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval); - retval = -EAGAIN; - goto out; - } - - /* We've committed to using the board, and can start filling in *dev. */ - dev->base_addr = ioaddr; - - outb(0x01, ioaddr + MISC_CTRL); - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + i); - pr_cont(" %pM", dev->dev_addr); - - if (mem_start) - net_debug = mem_start & 7; - -#ifdef MEM_BASE - dev->mem_start = MEM_BASE; - dev->mem_end = dev->mem_start + 0x10000; -#else - { - int base; - int size; - char mem_config = inb(ioaddr + MEM_CONFIG); - if (mem_config & 0x20) { - size = 64*1024; - base = 0xf00000 + (mem_config & 0x08 ? 0x080000 - : ((mem_config & 3) << 17)); - } else { - size = ((mem_config & 3) + 1) << 14; - base = 0x0c0000 + ( (mem_config & 0x18) << 12); - } - dev->mem_start = base; - dev->mem_end = base + size; - } -#endif - - dev->if_port = (inb(ioaddr + ROM_CONFIG) & 0x80) ? 1 : 0; - dev->irq = inb(ioaddr + IRQ_CONFIG) & 0x0f; - - pr_cont(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq, - dev->if_port ? "ex" : "in", dev->mem_start, dev->mem_end-1); - - if (net_debug) - pr_debug("%s", version); - - lp = netdev_priv(dev); - spin_lock_init(&lp->lock); - lp->base = ioremap(dev->mem_start, RX_BUF_END); - if (!lp->base) { - pr_err("3c507: unable to remap memory\n"); - retval = -EAGAIN; - goto out1; - } - - dev->netdev_ops = &netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - dev->ethtool_ops = &netdev_ethtool_ops; - dev->flags &= ~IFF_MULTICAST; /* Multicast doesn't work */ - return 0; -out1: - free_irq(dev->irq, dev); -out: - release_region(ioaddr, EL16_IO_EXTENT); - return retval; -} - -static int el16_open(struct net_device *dev) -{ - /* Initialize the 82586 memory and start it. */ - init_82586_mem(dev); - - netif_start_queue(dev); - return 0; -} - - -static void el16_tx_timeout (struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - void __iomem *shmem = lp->base; - - if (net_debug > 1) - pr_debug("%s: transmit timed out, %s? ", dev->name, - readw(shmem + iSCB_STATUS) & 0x8000 ? "IRQ conflict" : - "network cable problem"); - /* Try to restart the adaptor. */ - if (lp->last_restart == dev->stats.tx_packets) { - if (net_debug > 1) - pr_cont("Resetting board.\n"); - /* Completely reset the adaptor. */ - init_82586_mem (dev); - lp->tx_pkts_in_ring = 0; - } else { - /* Issue the channel attention signal and hope it "gets better". */ - if (net_debug > 1) - pr_cont("Kicking board.\n"); - writew(0xf000 | CUC_START | RX_START, shmem + iSCB_CMD); - outb (0, ioaddr + SIGNAL_CA); /* Issue channel-attn. */ - lp->last_restart = dev->stats.tx_packets; - } - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue (dev); -} - - -static netdev_tx_t el16_send_packet (struct sk_buff *skb, - struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - unsigned long flags; - short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; - unsigned char *buf = skb->data; - - netif_stop_queue (dev); - - spin_lock_irqsave (&lp->lock, flags); - - dev->stats.tx_bytes += length; - /* Disable the 82586's input to the interrupt line. */ - outb (0x80, ioaddr + MISC_CTRL); - - hardware_send_packet (dev, buf, skb->len, length - skb->len); - - /* Enable the 82586 interrupt input. */ - outb (0x84, ioaddr + MISC_CTRL); - - spin_unlock_irqrestore (&lp->lock, flags); - - dev_kfree_skb (skb); - - /* You might need to clean up and record Tx statistics here. */ - - return NETDEV_TX_OK; -} - -/* The typical workload of the driver: - Handle the network interface interrupts. */ -static irqreturn_t el16_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr, status, boguscount = 0; - ushort ack_cmd = 0; - void __iomem *shmem; - - if (dev == NULL) { - pr_err("net_interrupt(): irq %d for unknown device.\n", irq); - return IRQ_NONE; - } - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - shmem = lp->base; - - spin_lock(&lp->lock); - - status = readw(shmem+iSCB_STATUS); - - if (net_debug > 4) { - pr_debug("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status); - } - - /* Disable the 82586's input to the interrupt line. */ - outb(0x80, ioaddr + MISC_CTRL); - - /* Reap the Tx packet buffers. */ - while (lp->tx_pkts_in_ring) { - unsigned short tx_status = readw(shmem+lp->tx_reap); - if (!(tx_status & 0x8000)) { - if (net_debug > 5) - pr_debug("Tx command incomplete (%#x).\n", lp->tx_reap); - break; - } - /* Tx unsuccessful or some interesting status bit set. */ - if (!(tx_status & 0x2000) || (tx_status & 0x0f3f)) { - dev->stats.tx_errors++; - if (tx_status & 0x0600) dev->stats.tx_carrier_errors++; - if (tx_status & 0x0100) dev->stats.tx_fifo_errors++; - if (!(tx_status & 0x0040)) dev->stats.tx_heartbeat_errors++; - if (tx_status & 0x0020) dev->stats.tx_aborted_errors++; - dev->stats.collisions += tx_status & 0xf; - } - dev->stats.tx_packets++; - if (net_debug > 5) - pr_debug("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status); - lp->tx_reap += TX_BUF_SIZE; - if (lp->tx_reap > RX_BUF_START - TX_BUF_SIZE) - lp->tx_reap = TX_BUF_START; - - lp->tx_pkts_in_ring--; - /* There is always more space in the Tx ring buffer now. */ - netif_wake_queue(dev); - - if (++boguscount > 10) - break; - } - - if (status & 0x4000) { /* Packet received. */ - if (net_debug > 5) - pr_debug("Received packet, rx_head %04x.\n", lp->rx_head); - el16_rx(dev); - } - - /* Acknowledge the interrupt sources. */ - ack_cmd = status & 0xf000; - - if ((status & 0x0700) != 0x0200 && netif_running(dev)) { - if (net_debug) - pr_debug("%s: Command unit stopped, status %04x, restarting.\n", - dev->name, status); - /* If this ever occurs we should really re-write the idle loop, reset - the Tx list, and do a complete restart of the command unit. - For now we rely on the Tx timeout if the resume doesn't work. */ - ack_cmd |= CUC_RESUME; - } - - if ((status & 0x0070) != 0x0040 && netif_running(dev)) { - /* The Rx unit is not ready, it must be hung. Restart the receiver by - initializing the rx buffers, and issuing an Rx start command. */ - if (net_debug) - pr_debug("%s: Rx unit stopped, status %04x, restarting.\n", - dev->name, status); - init_rx_bufs(dev); - writew(RX_BUF_START,shmem+iSCB_RFA); - ack_cmd |= RX_START; - } - - writew(ack_cmd,shmem+iSCB_CMD); - outb(0, ioaddr + SIGNAL_CA); /* Issue channel-attn. */ - - /* Clear the latched interrupt. */ - outb(0, ioaddr + RESET_IRQ); - - /* Enable the 82586's interrupt input. */ - outb(0x84, ioaddr + MISC_CTRL); - spin_unlock(&lp->lock); - return IRQ_HANDLED; -} - -static int el16_close(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - void __iomem *shmem = lp->base; - - netif_stop_queue(dev); - - /* Flush the Tx and disable Rx. */ - writew(RX_SUSPEND | CUC_SUSPEND,shmem+iSCB_CMD); - outb(0, ioaddr + SIGNAL_CA); - - /* Disable the 82586's input to the interrupt line. */ - outb(0x80, ioaddr + MISC_CTRL); - - /* We always physically use the IRQ line, so we don't do free_irq(). */ - - /* Update the statistics here. */ - - return 0; -} - -/* Initialize the Rx-block list. */ -static void init_rx_bufs(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - void __iomem *write_ptr; - unsigned short SCB_base = SCB_BASE; - - int cur_rxbuf = lp->rx_head = RX_BUF_START; - - /* Initialize each Rx frame + data buffer. */ - do { /* While there is room for one more. */ - - write_ptr = lp->base + cur_rxbuf; - - writew(0x0000,write_ptr); /* Status */ - writew(0x0000,write_ptr+=2); /* Command */ - writew(cur_rxbuf + RX_BUF_SIZE,write_ptr+=2); /* Link */ - writew(cur_rxbuf + 22,write_ptr+=2); /* Buffer offset */ - writew(0x0000,write_ptr+=2); /* Pad for dest addr. */ - writew(0x0000,write_ptr+=2); - writew(0x0000,write_ptr+=2); - writew(0x0000,write_ptr+=2); /* Pad for source addr. */ - writew(0x0000,write_ptr+=2); - writew(0x0000,write_ptr+=2); - writew(0x0000,write_ptr+=2); /* Pad for protocol. */ - - writew(0x0000,write_ptr+=2); /* Buffer: Actual count */ - writew(-1,write_ptr+=2); /* Buffer: Next (none). */ - writew(cur_rxbuf + 0x20 + SCB_base,write_ptr+=2);/* Buffer: Address low */ - writew(0x0000,write_ptr+=2); - /* Finally, the number of bytes in the buffer. */ - writew(0x8000 + RX_BUF_SIZE-0x20,write_ptr+=2); - - lp->rx_tail = cur_rxbuf; - cur_rxbuf += RX_BUF_SIZE; - } while (cur_rxbuf <= RX_BUF_END - RX_BUF_SIZE); - - /* Terminate the list by setting the EOL bit, and wrap the pointer to make - the list a ring. */ - write_ptr = lp->base + lp->rx_tail + 2; - writew(0xC000,write_ptr); /* Command, mark as last. */ - writew(lp->rx_head,write_ptr+2); /* Link */ -} - -static void init_82586_mem(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - void __iomem *shmem = lp->base; - - /* Enable loopback to protect the wire while starting up, - and hold the 586 in reset during the memory initialization. */ - outb(0x20, ioaddr + MISC_CTRL); - - /* Fix the ISCP address and base. */ - init_words[3] = SCB_BASE; - init_words[7] = SCB_BASE; - - /* Write the words at 0xfff6 (address-aliased to 0xfffff6). */ - memcpy_toio(lp->base + RX_BUF_END - 10, init_words, 10); - - /* Write the words at 0x0000. */ - memcpy_toio(lp->base, init_words + 5, sizeof(init_words) - 10); - - /* Fill in the station address. */ - memcpy_toio(lp->base+SA_OFFSET, dev->dev_addr, ETH_ALEN); - - /* The Tx-block list is written as needed. We just set up the values. */ - lp->tx_cmd_link = IDLELOOP + 4; - lp->tx_head = lp->tx_reap = TX_BUF_START; - - init_rx_bufs(dev); - - /* Start the 586 by releasing the reset line, but leave loopback. */ - outb(0xA0, ioaddr + MISC_CTRL); - - /* This was time consuming to track down: you need to give two channel - attention signals to reliably start up the i82586. */ - outb(0, ioaddr + SIGNAL_CA); - - { - int boguscnt = 50; - while (readw(shmem+iSCB_STATUS) == 0) - if (--boguscnt == 0) { - pr_warning("%s: i82586 initialization timed out with status %04x, cmd %04x.\n", - dev->name, readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD)); - break; - } - /* Issue channel-attn -- the 82586 won't start. */ - outb(0, ioaddr + SIGNAL_CA); - } - - /* Disable loopback and enable interrupts. */ - outb(0x84, ioaddr + MISC_CTRL); - if (net_debug > 4) - pr_debug("%s: Initialized 82586, status %04x.\n", dev->name, - readw(shmem+iSCB_STATUS)); -} - -static void hardware_send_packet(struct net_device *dev, void *buf, short length, short pad) -{ - struct net_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - ushort tx_block = lp->tx_head; - void __iomem *write_ptr = lp->base + tx_block; - static char padding[ETH_ZLEN]; - - /* Set the write pointer to the Tx block, and put out the header. */ - writew(0x0000,write_ptr); /* Tx status */ - writew(CMD_INTR|CmdTx,write_ptr+=2); /* Tx command */ - writew(tx_block+16,write_ptr+=2); /* Next command is a NoOp. */ - writew(tx_block+8,write_ptr+=2); /* Data Buffer offset. */ - - /* Output the data buffer descriptor. */ - writew((pad + length) | 0x8000,write_ptr+=2); /* Byte count parameter. */ - writew(-1,write_ptr+=2); /* No next data buffer. */ - writew(tx_block+22+SCB_BASE,write_ptr+=2); /* Buffer follows the NoOp command. */ - writew(0x0000,write_ptr+=2); /* Buffer address high bits (always zero). */ - - /* Output the Loop-back NoOp command. */ - writew(0x0000,write_ptr+=2); /* Tx status */ - writew(CmdNOp,write_ptr+=2); /* Tx command */ - writew(tx_block+16,write_ptr+=2); /* Next is myself. */ - - /* Output the packet at the write pointer. */ - memcpy_toio(write_ptr+2, buf, length); - if (pad) - memcpy_toio(write_ptr+length+2, padding, pad); - - /* Set the old command link pointing to this send packet. */ - writew(tx_block,lp->base + lp->tx_cmd_link); - lp->tx_cmd_link = tx_block + 20; - - /* Set the next free tx region. */ - lp->tx_head = tx_block + TX_BUF_SIZE; - if (lp->tx_head > RX_BUF_START - TX_BUF_SIZE) - lp->tx_head = TX_BUF_START; - - if (net_debug > 4) { - pr_debug("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n", - dev->name, ioaddr, length, tx_block, lp->tx_head); - } - - /* Grimly block further packets if there has been insufficient reaping. */ - if (++lp->tx_pkts_in_ring < NUM_TX_BUFS) - netif_wake_queue(dev); -} - -static void el16_rx(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - void __iomem *shmem = lp->base; - ushort rx_head = lp->rx_head; - ushort rx_tail = lp->rx_tail; - ushort boguscount = 10; - short frame_status; - - while ((frame_status = readw(shmem+rx_head)) < 0) { /* Command complete */ - void __iomem *read_frame = lp->base + rx_head; - ushort rfd_cmd = readw(read_frame+2); - ushort next_rx_frame = readw(read_frame+4); - ushort data_buffer_addr = readw(read_frame+6); - void __iomem *data_frame = lp->base + data_buffer_addr; - ushort pkt_len = readw(data_frame); - - if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22 || - (pkt_len & 0xC000) != 0xC000) { - pr_err("%s: Rx frame at %#x corrupted, " - "status %04x cmd %04x next %04x " - "data-buf @%04x %04x.\n", - dev->name, rx_head, frame_status, rfd_cmd, - next_rx_frame, data_buffer_addr, pkt_len); - } else if ((frame_status & 0x2000) == 0) { - /* Frame Rxed, but with error. */ - dev->stats.rx_errors++; - if (frame_status & 0x0800) dev->stats.rx_crc_errors++; - if (frame_status & 0x0400) dev->stats.rx_frame_errors++; - if (frame_status & 0x0200) dev->stats.rx_fifo_errors++; - if (frame_status & 0x0100) dev->stats.rx_over_errors++; - if (frame_status & 0x0080) dev->stats.rx_length_errors++; - } else { - /* Malloc up new buffer. */ - struct sk_buff *skb; - - pkt_len &= 0x3fff; - skb = netdev_alloc_skb(dev, pkt_len + 2); - if (skb == NULL) { - pr_err("%s: Memory squeeze, dropping packet.\n", - dev->name); - dev->stats.rx_dropped++; - break; - } - - skb_reserve(skb,2); - - /* 'skb->data' points to the start of sk_buff data area. */ - memcpy_fromio(skb_put(skb,pkt_len), data_frame + 10, pkt_len); - - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - - /* Clear the status word and set End-of-List on the rx frame. */ - writew(0,read_frame); - writew(0xC000,read_frame+2); - /* Clear the end-of-list on the prev. RFD. */ - writew(0x0000,lp->base + rx_tail + 2); - - rx_tail = rx_head; - rx_head = next_rx_frame; - if (--boguscount == 0) - break; - } - - lp->rx_head = rx_head; - lp->rx_tail = rx_tail; -} - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); - strlcpy(info->version, DRV_VERSION, sizeof(info->version)); - snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx", - dev->base_addr); -} - -static u32 netdev_get_msglevel(struct net_device *dev) -{ - return debug; -} - -static void netdev_set_msglevel(struct net_device *dev, u32 level) -{ - debug = level; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, - .get_msglevel = netdev_get_msglevel, - .set_msglevel = netdev_set_msglevel, -}; - -#ifdef MODULE -static struct net_device *dev_3c507; -module_param(io, int, 0); -module_param(irq, int, 0); -MODULE_PARM_DESC(io, "EtherLink16 I/O base address"); -MODULE_PARM_DESC(irq, "(ignored)"); - -int __init init_module(void) -{ - if (io == 0) - pr_notice("3c507: You should not use auto-probing with insmod!\n"); - dev_3c507 = el16_probe(-1); - return IS_ERR(dev_3c507) ? PTR_ERR(dev_3c507) : 0; -} - -void __exit -cleanup_module(void) -{ - struct net_device *dev = dev_3c507; - unregister_netdev(dev); - free_irq(dev->irq, dev); - iounmap(((struct net_local *)netdev_priv(dev))->base); - release_region(dev->base_addr, EL16_IO_EXTENT); - free_netdev(dev); -} -#endif /* MODULE */ -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/i825xx/82596.c b/drivers/net/ethernet/i825xx/82596.c index 6aa927a..1c54e22 100644 --- a/drivers/net/ethernet/i825xx/82596.c +++ b/drivers/net/ethernet/i825xx/82596.c @@ -95,9 +95,6 @@ static char version[] __initdata = #if defined(CONFIG_BVME6000_NET) || defined(CONFIG_BVME6000_NET_MODULE) #define ENABLE_BVME6000_NET #endif -#if defined(CONFIG_APRICOT) || defined(CONFIG_APRICOT_MODULE) -#define ENABLE_APRICOT -#endif #ifdef ENABLE_MVME16x_NET #include <asm/mvme16xhw.h> @@ -120,8 +117,15 @@ static char version[] __initdata = #define WSWAPtbd(x) ((struct i596_tbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) #define WSWAPchar(x) ((char *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) #define ISCP_BUSY 0x00010000 -#define MACH_IS_APRICOT 0 #else +#error 82596.c: unknown architecture +#endif + +/* + * These were the intel versions, left here for reference. There + * are currently no x86 users of this legacy i82596 chip. + */ +#if 0 #define WSWAPrfd(x) ((struct i596_rfd *)((long)x)) #define WSWAPrbd(x) ((struct i596_rbd *)((long)x)) #define WSWAPiscp(x) ((struct i596_iscp *)((long)x)) @@ -130,7 +134,6 @@ static char version[] __initdata = #define WSWAPtbd(x) ((struct i596_tbd *)((long)x)) #define WSWAPchar(x) ((char *)((long)x)) #define ISCP_BUSY 0x0001 -#define MACH_IS_APRICOT 1 #endif /* @@ -383,11 +386,6 @@ static inline void CA(struct net_device *dev) i = *(volatile u32 *) (dev->base_addr); } #endif -#ifdef ENABLE_APRICOT - if (MACH_IS_APRICOT) { - outw(0, (short) (dev->base_addr) + 4); - } -#endif } @@ -617,9 +615,6 @@ static void rebuild_rx_bufs(struct net_device *dev) static int init_i596_mem(struct net_device *dev) { struct i596_private *lp = dev->ml_priv; -#if !defined(ENABLE_MVME16x_NET) && !defined(ENABLE_BVME6000_NET) || defined(ENABLE_APRICOT) - short ioaddr = dev->base_addr; -#endif unsigned long flags; MPU_PORT(dev, PORT_RESET, NULL); @@ -653,18 +648,6 @@ static int init_i596_mem(struct net_device *dev) MPU_PORT(dev, PORT_ALTSCP, (void *)virt_to_bus((void *)&lp->scp)); -#elif defined(ENABLE_APRICOT) - - { - u32 scp = virt_to_bus(&lp->scp); - - /* change the scp address */ - outw(0, ioaddr); - outw(0, ioaddr); - outb(4, ioaddr + 0xf); - outw(scp | 2, ioaddr); - outw(scp >> 16, ioaddr); - } #endif lp->last_cmd = jiffies; @@ -677,10 +660,6 @@ static int init_i596_mem(struct net_device *dev) if (MACH_IS_BVME6000) lp->scp.sysbus = 0x0000004c; #endif -#ifdef ENABLE_APRICOT - if (MACH_IS_APRICOT) - lp->scp.sysbus = 0x00440000; -#endif lp->scp.iscp = WSWAPiscp(virt_to_bus((void *)&lp->iscp)); lp->iscp.scb = WSWAPscb(virt_to_bus((void *)&lp->scb)); @@ -698,10 +677,6 @@ static int init_i596_mem(struct net_device *dev) DEB(DEB_INIT,printk(KERN_DEBUG "%s: starting i82596.\n", dev->name)); -#if defined(ENABLE_APRICOT) - (void) inb(ioaddr + 0x10); - outb(4, ioaddr + 0xf); -#endif CA(dev); if (wait_istat(dev,lp,1000,"initialization timed out")) @@ -1203,43 +1178,6 @@ struct net_device * __init i82596_probe(int unit) goto found; } #endif -#ifdef ENABLE_APRICOT - { - int checksum = 0; - int ioaddr = 0x300; - - /* this is easy the ethernet interface can only be at 0x300 */ - /* first check nothing is already registered here */ - - if (!request_region(ioaddr, I596_TOTAL_SIZE, DRV_NAME)) { - printk(KERN_ERR "82596: IO address 0x%04x in use\n", ioaddr); - err = -EBUSY; - goto out; - } - - dev->base_addr = ioaddr; - - for (i = 0; i < 8; i++) { - eth_addr[i] = inb(ioaddr + 8 + i); - checksum += eth_addr[i]; - } - - /* checksum is a multiple of 0x100, got this wrong first time - some machines have 0x100, some 0x200. The DOS driver doesn't - even bother with the checksum. - Some other boards trip the checksum.. but then appear as - ether address 0. Trap these - AC */ - - if ((checksum % 0x100) || - (memcmp(eth_addr, "\x00\x00\x49", 3) != 0)) { - err = -ENODEV; - goto out1; - } - - dev->irq = 10; - goto found; - } -#endif err = -ENODEV; goto out; @@ -1296,9 +1234,6 @@ out2: #endif free_page ((u32)(dev->mem_start)); out1: -#ifdef ENABLE_APRICOT - release_region(dev->base_addr, I596_TOTAL_SIZE); -#endif out: free_netdev(dev); return ERR_PTR(err); @@ -1455,10 +1390,6 @@ static irqreturn_t i596_interrupt(int irq, void *dev_id) *ethirq = 3; } #endif -#ifdef ENABLE_APRICOT - (void) inb(ioaddr + 0x10); - outb(4, ioaddr + 0xf); -#endif CA(dev); DEB(DEB_INTS,printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name)); @@ -1589,11 +1520,6 @@ static void set_multicast_list(struct net_device *dev) #ifdef MODULE static struct net_device *dev_82596; -#ifdef ENABLE_APRICOT -module_param(irq, int, 0); -MODULE_PARM_DESC(irq, "Apricot IRQ number"); -#endif - static int debug = -1; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "i82596 debug mask"); @@ -1620,10 +1546,6 @@ void __exit cleanup_module(void) IOMAP_FULL_CACHING); #endif free_page ((u32)(dev_82596->mem_start)); -#ifdef ENABLE_APRICOT - /* If we don't do this, we can't re-insmod it later. */ - release_region(dev_82596->base_addr, I596_TOTAL_SIZE); -#endif free_netdev(dev_82596); } diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig index 70f8c2d..955d929 100644 --- a/drivers/net/ethernet/i825xx/Kconfig +++ b/drivers/net/ethernet/i825xx/Kconfig @@ -20,29 +20,6 @@ config NET_VENDOR_I825XX if NET_VENDOR_I825XX -config ELPLUS - tristate "3c505 \"EtherLink Plus\" support" - depends on ISA && ISA_DMA_API - ---help--- - Information about this network (Ethernet) card can be found in - <file:Documentation/networking/3c505.txt>. If you have a card of - this type, say Y and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called 3c505. - -config EL16 - tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)" - depends on ISA && EXPERIMENTAL - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called 3c507. - config ARM_ETHER1 tristate "Acorn Ether1 support" depends on ARM && ARCH_ACORN @@ -50,17 +27,6 @@ config ARM_ETHER1 If you have an Acorn system with one of these (AKA25) network cards, you should say Y to this option if you wish to use it with Linux. -config APRICOT - tristate "Apricot Xen-II on board Ethernet" - depends on ISA - ---help--- - If you have a network (Ethernet) controller of this type, say Y and - read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called apricot. - config BVME6000_NET tristate "BVME6000 Ethernet support" depends on BVME6000 @@ -70,33 +36,6 @@ config BVME6000_NET in your kernel. To compile this driver as a module, choose M here. -config EEXPRESS - tristate "EtherExpress 16 support" - depends on ISA - ---help--- - If you have an EtherExpress16 network (Ethernet) card, say Y and - read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. Note that the Intel - EtherExpress16 card used to be regarded as a very poor choice - because the driver was very unreliable. We now have a new driver - that should do better. - - To compile this driver as a module, choose M here. The module - will be called eexpress. - -config EEXPRESS_PRO - tristate "EtherExpressPro support/EtherExpress 10 (i82595) support" - depends on ISA - ---help--- - If you have a network (Ethernet) card of this type, say Y. This - driver supports Intel i82595{FX,TX} based boards. Note however - that the EtherExpress PRO/100 Ethernet card has its own separate - driver. Please read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called eepro. - config LASI_82596 tristate "Lasi ethernet" depends on GSC @@ -104,14 +43,6 @@ config LASI_82596 Say Y here to support the builtin Intel 82596 ethernet controller found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet. -config LP486E - tristate "LP486E on board Ethernet" - depends on ISA - ---help--- - Say Y here to support the 82596-based on-board Ethernet controller - for the Panther motherboard, which is one of the two shipped in the - Intel Professional Workstation. - config MVME16x_NET tristate "MVME16x Ethernet support" depends on MVME16x @@ -121,17 +52,6 @@ config MVME16x_NET driver for this chip in your kernel. To compile this driver as a module, choose M here. -config NI52 - tristate "NI5210 support" - depends on ISA - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called ni52. - config SNI_82596 tristate "SNI RM ethernet" depends on SNI_RM @@ -148,14 +68,4 @@ config SUN3_82586 that this driver does not support 82586-based adapters on additional VME boards. -config ZNET - tristate "Zenith Z-Note support (EXPERIMENTAL)" - depends on EXPERIMENTAL && ISA_DMA_API && X86 - ---help--- - The Zenith Z-Note notebook computer has a built-in network - (Ethernet) card, and this is the Linux driver for it. Note that the - IBM Thinkpad 300 is compatible with the Z-Note and is also supported - by this driver. Read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - endif # NET_VENDOR_I825XX diff --git a/drivers/net/ethernet/i825xx/Makefile b/drivers/net/ethernet/i825xx/Makefile index 6adff85..8c8dcd2 100644 --- a/drivers/net/ethernet/i825xx/Makefile +++ b/drivers/net/ethernet/i825xx/Makefile @@ -3,15 +3,7 @@ # obj-$(CONFIG_ARM_ETHER1) += ether1.o -obj-$(CONFIG_EEXPRESS) += eexpress.o -obj-$(CONFIG_EEXPRESS_PRO) += eepro.o -obj-$(CONFIG_ELPLUS) += 3c505.o -obj-$(CONFIG_EL16) += 3c507.o -obj-$(CONFIG_LP486E) += lp486e.o -obj-$(CONFIG_NI52) += ni52.o obj-$(CONFIG_SUN3_82586) += sun3_82586.o -obj-$(CONFIG_ZNET) += znet.o -obj-$(CONFIG_APRICOT) += 82596.o obj-$(CONFIG_LASI_82596) += lasi_82596.o obj-$(CONFIG_SNI_82596) += sni_82596.o obj-$(CONFIG_MVME16x_NET) += 82596.o diff --git a/drivers/net/ethernet/i825xx/eepro.c b/drivers/net/ethernet/i825xx/eepro.c deleted file mode 100644 index 7f49fd5..0000000 --- a/drivers/net/ethernet/i825xx/eepro.c +++ /dev/null @@ -1,1822 +0,0 @@ -/* eepro.c: Intel EtherExpress Pro/10 device driver for Linux. */ -/* - Written 1994, 1995,1996 by Bao C. Ha. - - Copyright (C) 1994, 1995,1996 by Bao C. Ha. - - This software may be used and distributed - according to the terms of the GNU General Public License, - incorporated herein by reference. - - The author may be reached at bao.ha@srs.gov - or 418 Hastings Place, Martinez, GA 30907. - - Things remaining to do: - Better record keeping of errors. - Eliminate transmit interrupt to reduce overhead. - Implement "concurrent processing". I won't be doing it! - - Bugs: - - If you have a problem of not detecting the 82595 during a - reboot (warm reset), disable the FLASH memory should fix it. - This is a compatibility hardware problem. - - Versions: - 0.13b basic ethtool support (aris, 09/13/2004) - 0.13a in memory shortage, drop packets also in board - (Michael Westermann <mw@microdata-pos.de>, 07/30/2002) - 0.13 irq sharing, rewrote probe function, fixed a nasty bug in - hardware_send_packet and a major cleanup (aris, 11/08/2001) - 0.12d fixing a problem with single card detected as eight eth devices - fixing a problem with sudden drop in card performance - (chris (asdn@go2.pl), 10/29/2001) - 0.12c fixing some problems with old cards (aris, 01/08/2001) - 0.12b misc fixes (aris, 06/26/2000) - 0.12a port of version 0.12a of 2.2.x kernels to 2.3.x - (aris (aris@conectiva.com.br), 05/19/2000) - 0.11e some tweaks about multiple cards support (PdP, jul/aug 1999) - 0.11d added __initdata, __init stuff; call spin_lock_init - in eepro_probe1. Replaced "eepro" by dev->name. Augmented - the code protected by spin_lock in interrupt routine - (PdP, 12/12/1998) - 0.11c minor cleanup (PdP, RMC, 09/12/1998) - 0.11b Pascal Dupuis (dupuis@lei.ucl.ac.be): works as a module - under 2.1.xx. Debug messages are flagged as KERN_DEBUG to - avoid console flooding. Added locking at critical parts. Now - the dawn thing is SMP safe. - 0.11a Attempt to get 2.1.xx support up (RMC) - 0.11 Brian Candler added support for multiple cards. Tested as - a module, no idea if it works when compiled into kernel. - - 0.10e Rick Bressler notified me that ifconfig up;ifconfig down fails - because the irq is lost somewhere. Fixed that by moving - request_irq and free_irq to eepro_open and eepro_close respectively. - 0.10d Ugh! Now Wakeup works. Was seriously broken in my first attempt. - I'll need to find a way to specify an ioport other than - the default one in the PnP case. PnP definitively sucks. - And, yes, this is not the only reason. - 0.10c PnP Wakeup Test for 595FX. uncomment #define PnPWakeup; - to use. - 0.10b Should work now with (some) Pro/10+. At least for - me (and my two cards) it does. _No_ guarantee for - function with non-Pro/10+ cards! (don't have any) - (RMC, 9/11/96) - - 0.10 Added support for the Etherexpress Pro/10+. The - IRQ map was changed significantly from the old - pro/10. The new interrupt map was provided by - Rainer M. Canavan (Canavan@Zeus.cs.bonn.edu). - (BCH, 9/3/96) - - 0.09 Fixed a race condition in the transmit algorithm, - which causes crashes under heavy load with fast - pentium computers. The performance should also - improve a bit. The size of RX buffer, and hence - TX buffer, can also be changed via lilo or insmod. - (BCH, 7/31/96) - - 0.08 Implement 32-bit I/O for the 82595TX and 82595FX - based lan cards. Disable full-duplex mode if TPE - is not used. (BCH, 4/8/96) - - 0.07a Fix a stat report which counts every packet as a - heart-beat failure. (BCH, 6/3/95) - - 0.07 Modified to support all other 82595-based lan cards. - The IRQ vector of the EtherExpress Pro will be set - according to the value saved in the EEPROM. For other - cards, I will do autoirq_request() to grab the next - available interrupt vector. (BCH, 3/17/95) - - 0.06a,b Interim released. Minor changes in the comments and - print out format. (BCH, 3/9/95 and 3/14/95) - - 0.06 First stable release that I am comfortable with. (BCH, - 3/2/95) - - 0.05 Complete testing of multicast. (BCH, 2/23/95) - - 0.04 Adding multicast support. (BCH, 2/14/95) - - 0.03 First widely alpha release for public testing. - (BCH, 2/14/95) - -*/ - -static const char version[] = - "eepro.c: v0.13b 09/13/2004 aris@cathedrallabs.org\n"; - -#include <linux/module.h> - -/* - Sources: - - This driver wouldn't have been written without the availability - of the Crynwr's Lan595 driver source code. It helps me to - familiarize with the 82595 chipset while waiting for the Intel - documentation. I also learned how to detect the 82595 using - the packet driver's technique. - - This driver is written by cutting and pasting the skeleton.c driver - provided by Donald Becker. I also borrowed the EEPROM routine from - Donald Becker's 82586 driver. - - Datasheet for the Intel 82595 (including the TX and FX version). It - provides just enough info that the casual reader might think that it - documents the i82595. - - The User Manual for the 82595. It provides a lot of the missing - information. - -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/spinlock.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/bitops.h> -#include <linux/ethtool.h> - -#include <asm/io.h> -#include <asm/dma.h> - -#define DRV_NAME "eepro" -#define DRV_VERSION "0.13c" - -#define compat_dev_kfree_skb( skb, mode ) dev_kfree_skb( (skb) ) -/* I had reports of looong delays with SLOW_DOWN defined as udelay(2) */ -#define SLOW_DOWN inb(0x80) -/* udelay(2) */ -#define compat_init_data __initdata -enum iftype { AUI=0, BNC=1, TPE=2 }; - -/* First, a few definitions that the brave might change. */ -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int eepro_portlist[] compat_init_data = - { 0x300, 0x210, 0x240, 0x280, 0x2C0, 0x200, 0x320, 0x340, 0x360, 0}; -/* note: 0x300 is default, the 595FX supports ALL IO Ports - from 0x000 to 0x3F0, some of which are reserved in PCs */ - -/* To try the (not-really PnP Wakeup: */ -/* -#define PnPWakeup -*/ - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 0 -#endif -static unsigned int net_debug = NET_DEBUG; - -/* The number of low I/O ports used by the ethercard. */ -#define EEPRO_IO_EXTENT 16 - -/* Different 82595 chips */ -#define LAN595 0 -#define LAN595TX 1 -#define LAN595FX 2 -#define LAN595FX_10ISA 3 - -/* Information that need to be kept for each board. */ -struct eepro_local { - unsigned rx_start; - unsigned tx_start; /* start of the transmit chain */ - int tx_last; /* pointer to last packet in the transmit chain */ - unsigned tx_end; /* end of the transmit chain (plus 1) */ - int eepro; /* 1 for the EtherExpress Pro/10, - 2 for the EtherExpress Pro/10+, - 3 for the EtherExpress 10 (blue cards), - 0 for other 82595-based lan cards. */ - int version; /* a flag to indicate if this is a TX or FX - version of the 82595 chip. */ - int stepping; - - spinlock_t lock; /* Serializing lock */ - - unsigned rcv_ram; /* pre-calculated space for rx */ - unsigned xmt_ram; /* pre-calculated space for tx */ - unsigned char xmt_bar; - unsigned char xmt_lower_limit_reg; - unsigned char xmt_upper_limit_reg; - short xmt_lower_limit; - short xmt_upper_limit; - short rcv_lower_limit; - short rcv_upper_limit; - unsigned char eeprom_reg; - unsigned short word[8]; -}; - -/* The station (ethernet) address prefix, used for IDing the board. */ -#define SA_ADDR0 0x00 /* Etherexpress Pro/10 */ -#define SA_ADDR1 0xaa -#define SA_ADDR2 0x00 - -#define GetBit(x,y) ((x & (1<<y))>>y) - -/* EEPROM Word 0: */ -#define ee_PnP 0 /* Plug 'n Play enable bit */ -#define ee_Word1 1 /* Word 1? */ -#define ee_BusWidth 2 /* 8/16 bit */ -#define ee_FlashAddr 3 /* Flash Address */ -#define ee_FlashMask 0x7 /* Mask */ -#define ee_AutoIO 6 /* */ -#define ee_reserved0 7 /* =0! */ -#define ee_Flash 8 /* Flash there? */ -#define ee_AutoNeg 9 /* Auto Negotiation enabled? */ -#define ee_IO0 10 /* IO Address LSB */ -#define ee_IO0Mask 0x /*...*/ -#define ee_IO1 15 /* IO MSB */ - -/* EEPROM Word 1: */ -#define ee_IntSel 0 /* Interrupt */ -#define ee_IntMask 0x7 -#define ee_LI 3 /* Link Integrity 0= enabled */ -#define ee_PC 4 /* Polarity Correction 0= enabled */ -#define ee_TPE_AUI 5 /* PortSelection 1=TPE */ -#define ee_Jabber 6 /* Jabber prevention 0= enabled */ -#define ee_AutoPort 7 /* Auto Port Selection 1= Disabled */ -#define ee_SMOUT 8 /* SMout Pin Control 0= Input */ -#define ee_PROM 9 /* Flash EPROM / PROM 0=Flash */ -#define ee_reserved1 10 /* .. 12 =0! */ -#define ee_AltReady 13 /* Alternate Ready, 0=normal */ -#define ee_reserved2 14 /* =0! */ -#define ee_Duplex 15 - -/* Word2,3,4: */ -#define ee_IA5 0 /*bit start for individual Addr Byte 5 */ -#define ee_IA4 8 /*bit start for individual Addr Byte 5 */ -#define ee_IA3 0 /*bit start for individual Addr Byte 5 */ -#define ee_IA2 8 /*bit start for individual Addr Byte 5 */ -#define ee_IA1 0 /*bit start for individual Addr Byte 5 */ -#define ee_IA0 8 /*bit start for individual Addr Byte 5 */ - -/* Word 5: */ -#define ee_BNC_TPE 0 /* 0=TPE */ -#define ee_BootType 1 /* 00=None, 01=IPX, 10=ODI, 11=NDIS */ -#define ee_BootTypeMask 0x3 -#define ee_NumConn 3 /* Number of Connections 0= One or Two */ -#define ee_FlashSock 4 /* Presence of Flash Socket 0= Present */ -#define ee_PortTPE 5 -#define ee_PortBNC 6 -#define ee_PortAUI 7 -#define ee_PowerMgt 10 /* 0= disabled */ -#define ee_CP 13 /* Concurrent Processing */ -#define ee_CPMask 0x7 - -/* Word 6: */ -#define ee_Stepping 0 /* Stepping info */ -#define ee_StepMask 0x0F -#define ee_BoardID 4 /* Manucaturer Board ID, reserved */ -#define ee_BoardMask 0x0FFF - -/* Word 7: */ -#define ee_INT_TO_IRQ 0 /* int to IRQ Mapping = 0x1EB8 for Pro/10+ */ -#define ee_FX_INT2IRQ 0x1EB8 /* the _only_ mapping allowed for FX chips */ - -/*..*/ -#define ee_SIZE 0x40 /* total EEprom Size */ -#define ee_Checksum 0xBABA /* initial and final value for adding checksum */ - - -/* Card identification via EEprom: */ -#define ee_addr_vendor 0x10 /* Word offset for EISA Vendor ID */ -#define ee_addr_id 0x11 /* Word offset for Card ID */ -#define ee_addr_SN 0x12 /* Serial Number */ -#define ee_addr_CRC_8 0x14 /* CRC over last thee Bytes */ - - -#define ee_vendor_intel0 0x25 /* Vendor ID Intel */ -#define ee_vendor_intel1 0xD4 -#define ee_id_eepro10p0 0x10 /* ID for eepro/10+ */ -#define ee_id_eepro10p1 0x31 - -#define TX_TIMEOUT ((4*HZ)/10) - -/* Index to functions, as function prototypes. */ - -static int eepro_probe1(struct net_device *dev, int autoprobe); -static int eepro_open(struct net_device *dev); -static netdev_tx_t eepro_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t eepro_interrupt(int irq, void *dev_id); -static void eepro_rx(struct net_device *dev); -static void eepro_transmit_interrupt(struct net_device *dev); -static int eepro_close(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); -static void eepro_tx_timeout (struct net_device *dev); - -static int read_eeprom(int ioaddr, int location, struct net_device *dev); -static int hardware_send_packet(struct net_device *dev, void *buf, short length); -static int eepro_grab_irq(struct net_device *dev); - -/* - Details of the i82595. - -You will need either the datasheet or the user manual to understand what -is going on here. The 82595 is very different from the 82586, 82593. - -The receive algorithm in eepro_rx() is just an implementation of the -RCV ring structure that the Intel 82595 imposes at the hardware level. -The receive buffer is set at 24K, and the transmit buffer is 8K. I -am assuming that the total buffer memory is 32K, which is true for the -Intel EtherExpress Pro/10. If it is less than that on a generic card, -the driver will be broken. - -The transmit algorithm in the hardware_send_packet() is similar to the -one in the eepro_rx(). The transmit buffer is a ring linked list. -I just queue the next available packet to the end of the list. In my -system, the 82595 is so fast that the list seems to always contain a -single packet. In other systems with faster computers and more congested -network traffics, the ring linked list should improve performance by -allowing up to 8K worth of packets to be queued. - -The sizes of the receive and transmit buffers can now be changed via lilo -or insmod. Lilo uses the appended line "ether=io,irq,debug,rx-buffer,eth0" -where rx-buffer is in KB unit. Modules uses the parameter mem which is -also in KB unit, for example "insmod io=io-address irq=0 mem=rx-buffer." -The receive buffer has to be more than 3K or less than 29K. Otherwise, -it is reset to the default of 24K, and, hence, 8K for the trasnmit -buffer (transmit-buffer = 32K - receive-buffer). - -*/ -#define RAM_SIZE 0x8000 - -#define RCV_HEADER 8 -#define RCV_DEFAULT_RAM 0x6000 - -#define XMT_HEADER 8 -#define XMT_DEFAULT_RAM (RAM_SIZE - RCV_DEFAULT_RAM) - -#define XMT_START_PRO RCV_DEFAULT_RAM -#define XMT_START_10 0x0000 -#define RCV_START_PRO 0x0000 -#define RCV_START_10 XMT_DEFAULT_RAM - -#define RCV_DONE 0x0008 -#define RX_OK 0x2000 -#define RX_ERROR 0x0d81 - -#define TX_DONE_BIT 0x0080 -#define TX_OK 0x2000 -#define CHAIN_BIT 0x8000 -#define XMT_STATUS 0x02 -#define XMT_CHAIN 0x04 -#define XMT_COUNT 0x06 - -#define BANK0_SELECT 0x00 -#define BANK1_SELECT 0x40 -#define BANK2_SELECT 0x80 - -/* Bank 0 registers */ -#define COMMAND_REG 0x00 /* Register 0 */ -#define MC_SETUP 0x03 -#define XMT_CMD 0x04 -#define DIAGNOSE_CMD 0x07 -#define RCV_ENABLE_CMD 0x08 -#define RCV_DISABLE_CMD 0x0a -#define STOP_RCV_CMD 0x0b -#define RESET_CMD 0x0e -#define POWER_DOWN_CMD 0x18 -#define RESUME_XMT_CMD 0x1c -#define SEL_RESET_CMD 0x1e -#define STATUS_REG 0x01 /* Register 1 */ -#define RX_INT 0x02 -#define TX_INT 0x04 -#define EXEC_STATUS 0x30 -#define ID_REG 0x02 /* Register 2 */ -#define R_ROBIN_BITS 0xc0 /* round robin counter */ -#define ID_REG_MASK 0x2c -#define ID_REG_SIG 0x24 -#define AUTO_ENABLE 0x10 -#define INT_MASK_REG 0x03 /* Register 3 */ -#define RX_STOP_MASK 0x01 -#define RX_MASK 0x02 -#define TX_MASK 0x04 -#define EXEC_MASK 0x08 -#define ALL_MASK 0x0f -#define IO_32_BIT 0x10 -#define RCV_BAR 0x04 /* The following are word (16-bit) registers */ -#define RCV_STOP 0x06 - -#define XMT_BAR_PRO 0x0a -#define XMT_BAR_10 0x0b - -#define HOST_ADDRESS_REG 0x0c -#define IO_PORT 0x0e -#define IO_PORT_32_BIT 0x0c - -/* Bank 1 registers */ -#define REG1 0x01 -#define WORD_WIDTH 0x02 -#define INT_ENABLE 0x80 -#define INT_NO_REG 0x02 -#define RCV_LOWER_LIMIT_REG 0x08 -#define RCV_UPPER_LIMIT_REG 0x09 - -#define XMT_LOWER_LIMIT_REG_PRO 0x0a -#define XMT_UPPER_LIMIT_REG_PRO 0x0b -#define XMT_LOWER_LIMIT_REG_10 0x0b -#define XMT_UPPER_LIMIT_REG_10 0x0a - -/* Bank 2 registers */ -#define XMT_Chain_Int 0x20 /* Interrupt at the end of the transmit chain */ -#define XMT_Chain_ErrStop 0x40 /* Interrupt at the end of the chain even if there are errors */ -#define RCV_Discard_BadFrame 0x80 /* Throw bad frames away, and continue to receive others */ -#define REG2 0x02 -#define PRMSC_Mode 0x01 -#define Multi_IA 0x20 -#define REG3 0x03 -#define TPE_BIT 0x04 -#define BNC_BIT 0x20 -#define REG13 0x0d -#define FDX 0x00 -#define A_N_ENABLE 0x02 - -#define I_ADD_REG0 0x04 -#define I_ADD_REG1 0x05 -#define I_ADD_REG2 0x06 -#define I_ADD_REG3 0x07 -#define I_ADD_REG4 0x08 -#define I_ADD_REG5 0x09 - -#define EEPROM_REG_PRO 0x0a -#define EEPROM_REG_10 0x0b - -#define EESK 0x01 -#define EECS 0x02 -#define EEDI 0x04 -#define EEDO 0x08 - -/* do a full reset */ -#define eepro_reset(ioaddr) outb(RESET_CMD, ioaddr) - -/* do a nice reset */ -#define eepro_sel_reset(ioaddr) { \ - outb(SEL_RESET_CMD, ioaddr); \ - SLOW_DOWN; \ - SLOW_DOWN; \ - } - -/* disable all interrupts */ -#define eepro_dis_int(ioaddr) outb(ALL_MASK, ioaddr + INT_MASK_REG) - -/* clear all interrupts */ -#define eepro_clear_int(ioaddr) outb(ALL_MASK, ioaddr + STATUS_REG) - -/* enable tx/rx */ -#define eepro_en_int(ioaddr) outb(ALL_MASK & ~(RX_MASK | TX_MASK), \ - ioaddr + INT_MASK_REG) - -/* enable exec event interrupt */ -#define eepro_en_intexec(ioaddr) outb(ALL_MASK & ~(EXEC_MASK), ioaddr + INT_MASK_REG) - -/* enable rx */ -#define eepro_en_rx(ioaddr) outb(RCV_ENABLE_CMD, ioaddr) - -/* disable rx */ -#define eepro_dis_rx(ioaddr) outb(RCV_DISABLE_CMD, ioaddr) - -/* switch bank */ -#define eepro_sw2bank0(ioaddr) outb(BANK0_SELECT, ioaddr) -#define eepro_sw2bank1(ioaddr) outb(BANK1_SELECT, ioaddr) -#define eepro_sw2bank2(ioaddr) outb(BANK2_SELECT, ioaddr) - -/* enable interrupt line */ -#define eepro_en_intline(ioaddr) outb(inb(ioaddr + REG1) | INT_ENABLE,\ - ioaddr + REG1) - -/* disable interrupt line */ -#define eepro_dis_intline(ioaddr) outb(inb(ioaddr + REG1) & 0x7f, \ - ioaddr + REG1); - -/* set diagnose flag */ -#define eepro_diag(ioaddr) outb(DIAGNOSE_CMD, ioaddr) - -/* ack for rx int */ -#define eepro_ack_rx(ioaddr) outb (RX_INT, ioaddr + STATUS_REG) - -/* ack for tx int */ -#define eepro_ack_tx(ioaddr) outb (TX_INT, ioaddr + STATUS_REG) - -/* a complete sel reset */ -#define eepro_complete_selreset(ioaddr) { \ - dev->stats.tx_errors++;\ - eepro_sel_reset(ioaddr);\ - lp->tx_end = \ - lp->xmt_lower_limit;\ - lp->tx_start = lp->tx_end;\ - lp->tx_last = 0;\ - dev->trans_start = jiffies;\ - netif_wake_queue(dev);\ - eepro_en_rx(ioaddr);\ - } - -/* Check for a network adaptor of this type, and return '0' if one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - If dev->base_addr == 2, allocate space for the device and return success - (detachable devices only). - */ -static int __init do_eepro_probe(struct net_device *dev) -{ - int i; - int base_addr = dev->base_addr; - int irq = dev->irq; - -#ifdef PnPWakeup - /* XXXX for multiple cards should this only be run once? */ - - /* Wakeup: */ - #define WakeupPort 0x279 - #define WakeupSeq {0x6A, 0xB5, 0xDA, 0xED, 0xF6, 0xFB, 0x7D, 0xBE,\ - 0xDF, 0x6F, 0x37, 0x1B, 0x0D, 0x86, 0xC3, 0x61,\ - 0xB0, 0x58, 0x2C, 0x16, 0x8B, 0x45, 0xA2, 0xD1,\ - 0xE8, 0x74, 0x3A, 0x9D, 0xCE, 0xE7, 0x73, 0x43} - - { - unsigned short int WS[32]=WakeupSeq; - - if (request_region(WakeupPort, 2, "eepro wakeup")) { - if (net_debug>5) - printk(KERN_DEBUG "Waking UP\n"); - - outb_p(0,WakeupPort); - outb_p(0,WakeupPort); - for (i=0; i<32; i++) { - outb_p(WS[i],WakeupPort); - if (net_debug>5) printk(KERN_DEBUG ": %#x ",WS[i]); - } - - release_region(WakeupPort, 2); - } else - printk(KERN_WARNING "PnP wakeup region busy!\n"); - } -#endif - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return eepro_probe1(dev, 0); - - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (i = 0; eepro_portlist[i]; i++) { - dev->base_addr = eepro_portlist[i]; - dev->irq = irq; - if (eepro_probe1(dev, 1) == 0) - return 0; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init eepro_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct eepro_local)); - int err; - - if (!dev) - return ERR_PTR(-ENODEV); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_eepro_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static void __init printEEPROMInfo(struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - unsigned short Word; - int i,j; - - j = ee_Checksum; - for (i = 0; i < 8; i++) - j += lp->word[i]; - for ( ; i < ee_SIZE; i++) - j += read_eeprom(ioaddr, i, dev); - - printk(KERN_DEBUG "Checksum: %#x\n",j&0xffff); - - Word = lp->word[0]; - printk(KERN_DEBUG "Word0:\n"); - printk(KERN_DEBUG " Plug 'n Pray: %d\n",GetBit(Word,ee_PnP)); - printk(KERN_DEBUG " Buswidth: %d\n",(GetBit(Word,ee_BusWidth)+1)*8 ); - printk(KERN_DEBUG " AutoNegotiation: %d\n",GetBit(Word,ee_AutoNeg)); - printk(KERN_DEBUG " IO Address: %#x\n", (Word>>ee_IO0)<<4); - - if (net_debug>4) { - Word = lp->word[1]; - printk(KERN_DEBUG "Word1:\n"); - printk(KERN_DEBUG " INT: %d\n", Word & ee_IntMask); - printk(KERN_DEBUG " LI: %d\n", GetBit(Word,ee_LI)); - printk(KERN_DEBUG " PC: %d\n", GetBit(Word,ee_PC)); - printk(KERN_DEBUG " TPE/AUI: %d\n", GetBit(Word,ee_TPE_AUI)); - printk(KERN_DEBUG " Jabber: %d\n", GetBit(Word,ee_Jabber)); - printk(KERN_DEBUG " AutoPort: %d\n", !GetBit(Word,ee_AutoPort)); - printk(KERN_DEBUG " Duplex: %d\n", GetBit(Word,ee_Duplex)); - } - - Word = lp->word[5]; - printk(KERN_DEBUG "Word5:\n"); - printk(KERN_DEBUG " BNC: %d\n",GetBit(Word,ee_BNC_TPE)); - printk(KERN_DEBUG " NumConnectors: %d\n",GetBit(Word,ee_NumConn)); - printk(KERN_DEBUG " Has "); - if (GetBit(Word,ee_PortTPE)) printk(KERN_DEBUG "TPE "); - if (GetBit(Word,ee_PortBNC)) printk(KERN_DEBUG "BNC "); - if (GetBit(Word,ee_PortAUI)) printk(KERN_DEBUG "AUI "); - printk(KERN_DEBUG "port(s)\n"); - - Word = lp->word[6]; - printk(KERN_DEBUG "Word6:\n"); - printk(KERN_DEBUG " Stepping: %d\n",Word & ee_StepMask); - printk(KERN_DEBUG " BoardID: %d\n",Word>>ee_BoardID); - - Word = lp->word[7]; - printk(KERN_DEBUG "Word7:\n"); - printk(KERN_DEBUG " INT to IRQ:\n"); - - for (i=0, j=0; i<15; i++) - if (GetBit(Word,i)) printk(KERN_DEBUG " INT%d -> IRQ %d;",j++,i); - - printk(KERN_DEBUG "\n"); -} - -/* function to recalculate the limits of buffer based on rcv_ram */ -static void eepro_recalc (struct net_device *dev) -{ - struct eepro_local * lp; - - lp = netdev_priv(dev); - lp->xmt_ram = RAM_SIZE - lp->rcv_ram; - - if (lp->eepro == LAN595FX_10ISA) { - lp->xmt_lower_limit = XMT_START_10; - lp->xmt_upper_limit = (lp->xmt_ram - 2); - lp->rcv_lower_limit = lp->xmt_ram; - lp->rcv_upper_limit = (RAM_SIZE - 2); - } - else { - lp->rcv_lower_limit = RCV_START_PRO; - lp->rcv_upper_limit = (lp->rcv_ram - 2); - lp->xmt_lower_limit = lp->rcv_ram; - lp->xmt_upper_limit = (RAM_SIZE - 2); - } -} - -/* prints boot-time info */ -static void __init eepro_print_info (struct net_device *dev) -{ - struct eepro_local * lp = netdev_priv(dev); - int i; - const char * ifmap[] = {"AUI", "10Base2", "10BaseT"}; - - i = inb(dev->base_addr + ID_REG); - printk(KERN_DEBUG " id: %#x ",i); - printk(" io: %#x ", (unsigned)dev->base_addr); - - switch (lp->eepro) { - case LAN595FX_10ISA: - printk("%s: Intel EtherExpress 10 ISA\n at %#x,", - dev->name, (unsigned)dev->base_addr); - break; - case LAN595FX: - printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,", - dev->name, (unsigned)dev->base_addr); - break; - case LAN595TX: - printk("%s: Intel EtherExpress Pro/10 ISA at %#x,", - dev->name, (unsigned)dev->base_addr); - break; - case LAN595: - printk("%s: Intel 82595-based lan card at %#x,", - dev->name, (unsigned)dev->base_addr); - break; - } - - printk(" %pM", dev->dev_addr); - - if (net_debug > 3) - printk(KERN_DEBUG ", %dK RCV buffer", - (int)(lp->rcv_ram)/1024); - - if (dev->irq > 2) - printk(", IRQ %d, %s.\n", dev->irq, ifmap[dev->if_port]); - else - printk(", %s.\n", ifmap[dev->if_port]); - - if (net_debug > 3) { - i = lp->word[5]; - if (i & 0x2000) /* bit 13 of EEPROM word 5 */ - printk(KERN_DEBUG "%s: Concurrent Processing is " - "enabled but not used!\n", dev->name); - } - - /* Check the station address for the manufacturer's code */ - if (net_debug>3) - printEEPROMInfo(dev); -} - -static const struct ethtool_ops eepro_ethtool_ops; - -static const struct net_device_ops eepro_netdev_ops = { - .ndo_open = eepro_open, - .ndo_stop = eepro_close, - .ndo_start_xmit = eepro_send_packet, - .ndo_set_rx_mode = set_multicast_list, - .ndo_tx_timeout = eepro_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/* This is the real probe routine. Linux has a history of friendly device - probes on the ISA bus. A good device probe avoids doing writes, and - verifies that the correct device exists and functions. */ - -static int __init eepro_probe1(struct net_device *dev, int autoprobe) -{ - unsigned short station_addr[3], id, counter; - int i; - struct eepro_local *lp; - int ioaddr = dev->base_addr; - int err; - - /* Grab the region so we can find another board if autoIRQ fails. */ - if (!request_region(ioaddr, EEPRO_IO_EXTENT, DRV_NAME)) { - if (!autoprobe) - printk(KERN_WARNING "EEPRO: io-port 0x%04x in use\n", - ioaddr); - return -EBUSY; - } - - /* Now, we are going to check for the signature of the - ID_REG (register 2 of bank 0) */ - - id = inb(ioaddr + ID_REG); - - if ((id & ID_REG_MASK) != ID_REG_SIG) - goto exit; - - /* We seem to have the 82595 signature, let's - play with its counter (last 2 bits of - register 2 of bank 0) to be sure. */ - - counter = id & R_ROBIN_BITS; - - if ((inb(ioaddr + ID_REG) & R_ROBIN_BITS) != (counter + 0x40)) - goto exit; - - lp = netdev_priv(dev); - memset(lp, 0, sizeof(struct eepro_local)); - lp->xmt_bar = XMT_BAR_PRO; - lp->xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_PRO; - lp->xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_PRO; - lp->eeprom_reg = EEPROM_REG_PRO; - spin_lock_init(&lp->lock); - - /* Now, get the ethernet hardware address from - the EEPROM */ - station_addr[0] = read_eeprom(ioaddr, 2, dev); - - /* FIXME - find another way to know that we've found - * an Etherexpress 10 - */ - if (station_addr[0] == 0x0000 || station_addr[0] == 0xffff) { - lp->eepro = LAN595FX_10ISA; - lp->eeprom_reg = EEPROM_REG_10; - lp->xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_10; - lp->xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_10; - lp->xmt_bar = XMT_BAR_10; - station_addr[0] = read_eeprom(ioaddr, 2, dev); - } - - /* get all words at once. will be used here and for ethtool */ - for (i = 0; i < 8; i++) { - lp->word[i] = read_eeprom(ioaddr, i, dev); - } - station_addr[1] = lp->word[3]; - station_addr[2] = lp->word[4]; - - if (!lp->eepro) { - if (lp->word[7] == ee_FX_INT2IRQ) - lp->eepro = 2; - else if (station_addr[2] == SA_ADDR1) - lp->eepro = 1; - } - - /* Fill in the 'dev' fields. */ - for (i=0; i < 6; i++) - dev->dev_addr[i] = ((unsigned char *) station_addr)[5-i]; - - /* RX buffer must be more than 3K and less than 29K */ - if (dev->mem_end < 3072 || dev->mem_end > 29696) - lp->rcv_ram = RCV_DEFAULT_RAM; - - /* calculate {xmt,rcv}_{lower,upper}_limit */ - eepro_recalc(dev); - - if (GetBit(lp->word[5], ee_BNC_TPE)) - dev->if_port = BNC; - else - dev->if_port = TPE; - - if (dev->irq < 2 && lp->eepro != 0) { - /* Mask off INT number */ - int count = lp->word[1] & 7; - unsigned irqMask = lp->word[7]; - - while (count--) - irqMask &= irqMask - 1; - - count = ffs(irqMask); - - if (count) - dev->irq = count - 1; - - if (dev->irq < 2) { - printk(KERN_ERR " Duh! illegal interrupt vector stored in EEPROM.\n"); - goto exit; - } else if (dev->irq == 2) { - dev->irq = 9; - } - } - - dev->netdev_ops = &eepro_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - dev->ethtool_ops = &eepro_ethtool_ops; - - /* print boot time info */ - eepro_print_info(dev); - - /* reset 82595 */ - eepro_reset(ioaddr); - - err = register_netdev(dev); - if (err) - goto err; - return 0; -exit: - err = -ENODEV; -err: - release_region(dev->base_addr, EEPRO_IO_EXTENT); - return err; -} - -/* Open/initialize the board. This is called (in the current kernel) - sometime after booting when the 'ifconfig' program is run. - - This routine should set everything up anew at each open, even - registers that "should" only need to be set once at boot, so that - there is non-reboot way to recover if something goes wrong. - */ - -static const char irqrmap[] = {-1,-1,0,1,-1,2,-1,-1,-1,0,3,4,-1,-1,-1,-1}; -static const char irqrmap2[] = {-1,-1,4,0,1,2,-1,3,-1,4,5,6,7,-1,-1,-1}; -static int eepro_grab_irq(struct net_device *dev) -{ - static const int irqlist[] = { 3, 4, 5, 7, 9, 10, 11, 12, 0 }; - const int *irqp = irqlist; - int temp_reg, ioaddr = dev->base_addr; - - eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */ - - /* Enable the interrupt line. */ - eepro_en_intline(ioaddr); - - /* be CAREFUL, BANK 0 now */ - eepro_sw2bank0(ioaddr); - - /* clear all interrupts */ - eepro_clear_int(ioaddr); - - /* Let EXEC event to interrupt */ - eepro_en_intexec(ioaddr); - - do { - eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */ - - temp_reg = inb(ioaddr + INT_NO_REG); - outb((temp_reg & 0xf8) | irqrmap[*irqp], ioaddr + INT_NO_REG); - - eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */ - - if (request_irq (*irqp, NULL, IRQF_SHARED, "bogus", dev) != EBUSY) { - unsigned long irq_mask; - /* Twinkle the interrupt, and check if it's seen */ - irq_mask = probe_irq_on(); - - eepro_diag(ioaddr); /* RESET the 82595 */ - mdelay(20); - - if (*irqp == probe_irq_off(irq_mask)) /* It's a good IRQ line */ - break; - - /* clear all interrupts */ - eepro_clear_int(ioaddr); - } - } while (*++irqp); - - eepro_sw2bank1(ioaddr); /* Switch back to Bank 1 */ - - /* Disable the physical interrupt line. */ - eepro_dis_intline(ioaddr); - - eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */ - - /* Mask all the interrupts. */ - eepro_dis_int(ioaddr); - - /* clear all interrupts */ - eepro_clear_int(ioaddr); - - return dev->irq; -} - -static int eepro_open(struct net_device *dev) -{ - unsigned short temp_reg, old8, old9; - int irqMask; - int i, ioaddr = dev->base_addr; - struct eepro_local *lp = netdev_priv(dev); - - if (net_debug > 3) - printk(KERN_DEBUG "%s: entering eepro_open routine.\n", dev->name); - - irqMask = lp->word[7]; - - if (lp->eepro == LAN595FX_10ISA) { - if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 3;\n"); - } - else if (irqMask == ee_FX_INT2IRQ) /* INT to IRQ Mask */ - { - lp->eepro = 2; /* Yes, an Intel EtherExpress Pro/10+ */ - if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 2;\n"); - } - - else if ((dev->dev_addr[0] == SA_ADDR0 && - dev->dev_addr[1] == SA_ADDR1 && - dev->dev_addr[2] == SA_ADDR2)) - { - lp->eepro = 1; - if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 1;\n"); - } /* Yes, an Intel EtherExpress Pro/10 */ - - else lp->eepro = 0; /* No, it is a generic 82585 lan card */ - - /* Get the interrupt vector for the 82595 */ - if (dev->irq < 2 && eepro_grab_irq(dev) == 0) { - printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq); - return -EAGAIN; - } - - if (request_irq(dev->irq , eepro_interrupt, 0, dev->name, dev)) { - printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq); - return -EAGAIN; - } - - /* Initialize the 82595. */ - - eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */ - temp_reg = inb(ioaddr + lp->eeprom_reg); - - lp->stepping = temp_reg >> 5; /* Get the stepping number of the 595 */ - - if (net_debug > 3) - printk(KERN_DEBUG "The stepping of the 82595 is %d\n", lp->stepping); - - if (temp_reg & 0x10) /* Check the TurnOff Enable bit */ - outb(temp_reg & 0xef, ioaddr + lp->eeprom_reg); - for (i=0; i < 6; i++) - outb(dev->dev_addr[i] , ioaddr + I_ADD_REG0 + i); - - temp_reg = inb(ioaddr + REG1); /* Setup Transmit Chaining */ - outb(temp_reg | XMT_Chain_Int | XMT_Chain_ErrStop /* and discard bad RCV frames */ - | RCV_Discard_BadFrame, ioaddr + REG1); - - temp_reg = inb(ioaddr + REG2); /* Match broadcast */ - outb(temp_reg | 0x14, ioaddr + REG2); - - temp_reg = inb(ioaddr + REG3); - outb(temp_reg & 0x3f, ioaddr + REG3); /* clear test mode */ - - /* Set the receiving mode */ - eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */ - - /* Set the interrupt vector */ - temp_reg = inb(ioaddr + INT_NO_REG); - if (lp->eepro == LAN595FX || lp->eepro == LAN595FX_10ISA) - outb((temp_reg & 0xf8) | irqrmap2[dev->irq], ioaddr + INT_NO_REG); - else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG); - - - temp_reg = inb(ioaddr + INT_NO_REG); - if (lp->eepro == LAN595FX || lp->eepro == LAN595FX_10ISA) - outb((temp_reg & 0xf0) | irqrmap2[dev->irq] | 0x08,ioaddr+INT_NO_REG); - else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG); - - if (net_debug > 3) - printk(KERN_DEBUG "eepro_open: content of INT Reg is %x\n", temp_reg); - - - /* Initialize the RCV and XMT upper and lower limits */ - outb(lp->rcv_lower_limit >> 8, ioaddr + RCV_LOWER_LIMIT_REG); - outb(lp->rcv_upper_limit >> 8, ioaddr + RCV_UPPER_LIMIT_REG); - outb(lp->xmt_lower_limit >> 8, ioaddr + lp->xmt_lower_limit_reg); - outb(lp->xmt_upper_limit >> 8, ioaddr + lp->xmt_upper_limit_reg); - - /* Enable the interrupt line. */ - eepro_en_intline(ioaddr); - - /* Switch back to Bank 0 */ - eepro_sw2bank0(ioaddr); - - /* Let RX and TX events to interrupt */ - eepro_en_int(ioaddr); - - /* clear all interrupts */ - eepro_clear_int(ioaddr); - - /* Initialize RCV */ - outw(lp->rcv_lower_limit, ioaddr + RCV_BAR); - lp->rx_start = lp->rcv_lower_limit; - outw(lp->rcv_upper_limit | 0xfe, ioaddr + RCV_STOP); - - /* Initialize XMT */ - outw(lp->xmt_lower_limit, ioaddr + lp->xmt_bar); - lp->tx_start = lp->tx_end = lp->xmt_lower_limit; - lp->tx_last = 0; - - /* Check for the i82595TX and i82595FX */ - old8 = inb(ioaddr + 8); - outb(~old8, ioaddr + 8); - - if ((temp_reg = inb(ioaddr + 8)) == old8) { - if (net_debug > 3) - printk(KERN_DEBUG "i82595 detected!\n"); - lp->version = LAN595; - } - else { - lp->version = LAN595TX; - outb(old8, ioaddr + 8); - old9 = inb(ioaddr + 9); - - if (irqMask==ee_FX_INT2IRQ) { - if (net_debug > 3) { - printk(KERN_DEBUG "IrqMask: %#x\n",irqMask); - printk(KERN_DEBUG "i82595FX detected!\n"); - } - lp->version = LAN595FX; - outb(old9, ioaddr + 9); - if (dev->if_port != TPE) { /* Hopefully, this will fix the - problem of using Pentiums and - pro/10 w/ BNC. */ - eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */ - temp_reg = inb(ioaddr + REG13); - /* disable the full duplex mode since it is not - applicable with the 10Base2 cable. */ - outb(temp_reg & ~(FDX | A_N_ENABLE), REG13); - eepro_sw2bank0(ioaddr); /* be CAREFUL, BANK 0 now */ - } - } - else if (net_debug > 3) { - printk(KERN_DEBUG "temp_reg: %#x ~old9: %#x\n",temp_reg,((~old9)&0xff)); - printk(KERN_DEBUG "i82595TX detected!\n"); - } - } - - eepro_sel_reset(ioaddr); - - netif_start_queue(dev); - - if (net_debug > 3) - printk(KERN_DEBUG "%s: exiting eepro_open routine.\n", dev->name); - - /* enabling rx */ - eepro_en_rx(ioaddr); - - return 0; -} - -static void eepro_tx_timeout (struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - /* if (net_debug > 1) */ - printk (KERN_ERR "%s: transmit timed out, %s?\n", dev->name, - "network cable problem"); - /* This is not a duplicate. One message for the console, - one for the log file */ - printk (KERN_DEBUG "%s: transmit timed out, %s?\n", dev->name, - "network cable problem"); - eepro_complete_selreset(ioaddr); -} - - -static netdev_tx_t eepro_send_packet(struct sk_buff *skb, - struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - unsigned long flags; - int ioaddr = dev->base_addr; - short length = skb->len; - - if (net_debug > 5) - printk(KERN_DEBUG "%s: entering eepro_send_packet routine.\n", dev->name); - - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - netif_stop_queue (dev); - - eepro_dis_int(ioaddr); - spin_lock_irqsave(&lp->lock, flags); - - { - unsigned char *buf = skb->data; - - if (hardware_send_packet(dev, buf, length)) - /* we won't wake queue here because we're out of space */ - dev->stats.tx_dropped++; - else { - dev->stats.tx_bytes+=skb->len; - netif_wake_queue(dev); - } - - } - - dev_kfree_skb (skb); - - /* You might need to clean up and record Tx statistics here. */ - /* dev->stats.tx_aborted_errors++; */ - - if (net_debug > 5) - printk(KERN_DEBUG "%s: exiting eepro_send_packet routine.\n", dev->name); - - eepro_en_int(ioaddr); - spin_unlock_irqrestore(&lp->lock, flags); - - return NETDEV_TX_OK; -} - - -/* The typical workload of the driver: - Handle the network interface interrupts. */ - -static irqreturn_t -eepro_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct eepro_local *lp; - int ioaddr, status, boguscount = 20; - int handled = 0; - - lp = netdev_priv(dev); - - spin_lock(&lp->lock); - - if (net_debug > 5) - printk(KERN_DEBUG "%s: entering eepro_interrupt routine.\n", dev->name); - - ioaddr = dev->base_addr; - - while (((status = inb(ioaddr + STATUS_REG)) & (RX_INT|TX_INT)) && (boguscount--)) - { - handled = 1; - if (status & RX_INT) { - if (net_debug > 4) - printk(KERN_DEBUG "%s: packet received interrupt.\n", dev->name); - - eepro_dis_int(ioaddr); - - /* Get the received packets */ - eepro_ack_rx(ioaddr); - eepro_rx(dev); - - eepro_en_int(ioaddr); - } - if (status & TX_INT) { - if (net_debug > 4) - printk(KERN_DEBUG "%s: packet transmit interrupt.\n", dev->name); - - - eepro_dis_int(ioaddr); - - /* Process the status of transmitted packets */ - eepro_ack_tx(ioaddr); - eepro_transmit_interrupt(dev); - - eepro_en_int(ioaddr); - } - } - - if (net_debug > 5) - printk(KERN_DEBUG "%s: exiting eepro_interrupt routine.\n", dev->name); - - spin_unlock(&lp->lock); - return IRQ_RETVAL(handled); -} - -static int eepro_close(struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - short temp_reg; - - netif_stop_queue(dev); - - eepro_sw2bank1(ioaddr); /* Switch back to Bank 1 */ - - /* Disable the physical interrupt line. */ - temp_reg = inb(ioaddr + REG1); - outb(temp_reg & 0x7f, ioaddr + REG1); - - eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */ - - /* Flush the Tx and disable Rx. */ - outb(STOP_RCV_CMD, ioaddr); - lp->tx_start = lp->tx_end = lp->xmt_lower_limit; - lp->tx_last = 0; - - /* Mask all the interrupts. */ - eepro_dis_int(ioaddr); - - /* clear all interrupts */ - eepro_clear_int(ioaddr); - - /* Reset the 82595 */ - eepro_reset(ioaddr); - - /* release the interrupt */ - free_irq(dev->irq, dev); - - /* Update the statistics here. What statistics? */ - - return 0; -} - -/* Set or clear the multicast filter for this adaptor. - */ -static void -set_multicast_list(struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - unsigned short mode; - struct netdev_hw_addr *ha; - int mc_count = netdev_mc_count(dev); - - if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || mc_count > 63) - { - eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */ - mode = inb(ioaddr + REG2); - outb(mode | PRMSC_Mode, ioaddr + REG2); - mode = inb(ioaddr + REG3); - outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */ - eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */ - } - - else if (mc_count == 0) - { - eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */ - mode = inb(ioaddr + REG2); - outb(mode & 0xd6, ioaddr + REG2); /* Turn off Multi-IA and PRMSC_Mode bits */ - mode = inb(ioaddr + REG3); - outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */ - eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */ - } - - else - { - unsigned short status, *eaddrs; - int i, boguscount = 0; - - /* Disable RX and TX interrupts. Necessary to avoid - corruption of the HOST_ADDRESS_REG by interrupt - service routines. */ - eepro_dis_int(ioaddr); - - eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */ - mode = inb(ioaddr + REG2); - outb(mode | Multi_IA, ioaddr + REG2); - mode = inb(ioaddr + REG3); - outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */ - eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */ - outw(lp->tx_end, ioaddr + HOST_ADDRESS_REG); - outw(MC_SETUP, ioaddr + IO_PORT); - outw(0, ioaddr + IO_PORT); - outw(0, ioaddr + IO_PORT); - outw(6 * (mc_count + 1), ioaddr + IO_PORT); - - netdev_for_each_mc_addr(ha, dev) { - eaddrs = (unsigned short *) ha->addr; - outw(*eaddrs++, ioaddr + IO_PORT); - outw(*eaddrs++, ioaddr + IO_PORT); - outw(*eaddrs++, ioaddr + IO_PORT); - } - - eaddrs = (unsigned short *) dev->dev_addr; - outw(eaddrs[0], ioaddr + IO_PORT); - outw(eaddrs[1], ioaddr + IO_PORT); - outw(eaddrs[2], ioaddr + IO_PORT); - outw(lp->tx_end, ioaddr + lp->xmt_bar); - outb(MC_SETUP, ioaddr); - - /* Update the transmit queue */ - i = lp->tx_end + XMT_HEADER + 6 * (mc_count + 1); - - if (lp->tx_start != lp->tx_end) - { - /* update the next address and the chain bit in the - last packet */ - outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG); - outw(i, ioaddr + IO_PORT); - outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG); - status = inw(ioaddr + IO_PORT); - outw(status | CHAIN_BIT, ioaddr + IO_PORT); - lp->tx_end = i ; - } - else { - lp->tx_start = lp->tx_end = i ; - } - - /* Acknowledge that the MC setup is done */ - do { /* We should be doing this in the eepro_interrupt()! */ - SLOW_DOWN; - SLOW_DOWN; - if (inb(ioaddr + STATUS_REG) & 0x08) - { - i = inb(ioaddr); - outb(0x08, ioaddr + STATUS_REG); - - if (i & 0x20) { /* command ABORTed */ - printk(KERN_NOTICE "%s: multicast setup failed.\n", - dev->name); - break; - } else if ((i & 0x0f) == 0x03) { /* MC-Done */ - printk(KERN_DEBUG "%s: set Rx mode to %d address%s.\n", - dev->name, mc_count, - mc_count > 1 ? "es":""); - break; - } - } - } while (++boguscount < 100); - - /* Re-enable RX and TX interrupts */ - eepro_en_int(ioaddr); - } - if (lp->eepro == LAN595FX_10ISA) { - eepro_complete_selreset(ioaddr); - } - else - eepro_en_rx(ioaddr); -} - -/* The horrible routine to read a word from the serial EEPROM. */ -/* IMPORTANT - the 82595 will be set to Bank 0 after the eeprom is read */ - -/* The delay between EEPROM clock transitions. */ -#define eeprom_delay() { udelay(40); } -#define EE_READ_CMD (6 << 6) - -static int -read_eeprom(int ioaddr, int location, struct net_device *dev) -{ - int i; - unsigned short retval = 0; - struct eepro_local *lp = netdev_priv(dev); - short ee_addr = ioaddr + lp->eeprom_reg; - int read_cmd = location | EE_READ_CMD; - short ctrl_val = EECS ; - - /* XXXX - black magic */ - eepro_sw2bank1(ioaddr); - outb(0x00, ioaddr + STATUS_REG); - /* XXXX - black magic */ - - eepro_sw2bank2(ioaddr); - outb(ctrl_val, ee_addr); - - /* Shift the read command bits out. */ - for (i = 8; i >= 0; i--) { - short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI - : ctrl_val; - outb(outval, ee_addr); - outb(outval | EESK, ee_addr); /* EEPROM clock tick. */ - eeprom_delay(); - outb(outval, ee_addr); /* Finish EEPROM a clock tick. */ - eeprom_delay(); - } - outb(ctrl_val, ee_addr); - - for (i = 16; i > 0; i--) { - outb(ctrl_val | EESK, ee_addr); eeprom_delay(); - retval = (retval << 1) | ((inb(ee_addr) & EEDO) ? 1 : 0); - outb(ctrl_val, ee_addr); eeprom_delay(); - } - - /* Terminate the EEPROM access. */ - ctrl_val &= ~EECS; - outb(ctrl_val | EESK, ee_addr); - eeprom_delay(); - outb(ctrl_val, ee_addr); - eeprom_delay(); - eepro_sw2bank0(ioaddr); - return retval; -} - -static int -hardware_send_packet(struct net_device *dev, void *buf, short length) -{ - struct eepro_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - unsigned status, tx_available, last, end; - - if (net_debug > 5) - printk(KERN_DEBUG "%s: entering hardware_send_packet routine.\n", dev->name); - - /* determine how much of the transmit buffer space is available */ - if (lp->tx_end > lp->tx_start) - tx_available = lp->xmt_ram - (lp->tx_end - lp->tx_start); - else if (lp->tx_end < lp->tx_start) - tx_available = lp->tx_start - lp->tx_end; - else tx_available = lp->xmt_ram; - - if (((((length + 3) >> 1) << 1) + 2*XMT_HEADER) >= tx_available) { - /* No space available ??? */ - return 1; - } - - last = lp->tx_end; - end = last + (((length + 3) >> 1) << 1) + XMT_HEADER; - - if (end >= lp->xmt_upper_limit + 2) { /* the transmit buffer is wrapped around */ - if ((lp->xmt_upper_limit + 2 - last) <= XMT_HEADER) { - /* Arrrr!!!, must keep the xmt header together, - several days were lost to chase this one down. */ - last = lp->xmt_lower_limit; - end = last + (((length + 3) >> 1) << 1) + XMT_HEADER; - } - else end = lp->xmt_lower_limit + (end - - lp->xmt_upper_limit + 2); - } - - outw(last, ioaddr + HOST_ADDRESS_REG); - outw(XMT_CMD, ioaddr + IO_PORT); - outw(0, ioaddr + IO_PORT); - outw(end, ioaddr + IO_PORT); - outw(length, ioaddr + IO_PORT); - - if (lp->version == LAN595) - outsw(ioaddr + IO_PORT, buf, (length + 3) >> 1); - else { /* LAN595TX or LAN595FX, capable of 32-bit I/O processing */ - unsigned short temp = inb(ioaddr + INT_MASK_REG); - outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG); - outsl(ioaddr + IO_PORT_32_BIT, buf, (length + 3) >> 2); - outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG); - } - - /* A dummy read to flush the DRAM write pipeline */ - status = inw(ioaddr + IO_PORT); - - if (lp->tx_start == lp->tx_end) { - outw(last, ioaddr + lp->xmt_bar); - outb(XMT_CMD, ioaddr); - lp->tx_start = last; /* I don't like to change tx_start here */ - } - else { - /* update the next address and the chain bit in the - last packet */ - - if (lp->tx_end != last) { - outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG); - outw(last, ioaddr + IO_PORT); - } - - outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG); - status = inw(ioaddr + IO_PORT); - outw(status | CHAIN_BIT, ioaddr + IO_PORT); - - /* Continue the transmit command */ - outb(RESUME_XMT_CMD, ioaddr); - } - - lp->tx_last = last; - lp->tx_end = end; - - if (net_debug > 5) - printk(KERN_DEBUG "%s: exiting hardware_send_packet routine.\n", dev->name); - - return 0; -} - -static void -eepro_rx(struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - short boguscount = 20; - short rcv_car = lp->rx_start; - unsigned rcv_event, rcv_status, rcv_next_frame, rcv_size; - - if (net_debug > 5) - printk(KERN_DEBUG "%s: entering eepro_rx routine.\n", dev->name); - - /* Set the read pointer to the start of the RCV */ - outw(rcv_car, ioaddr + HOST_ADDRESS_REG); - - rcv_event = inw(ioaddr + IO_PORT); - - while (rcv_event == RCV_DONE) { - - rcv_status = inw(ioaddr + IO_PORT); - rcv_next_frame = inw(ioaddr + IO_PORT); - rcv_size = inw(ioaddr + IO_PORT); - - if ((rcv_status & (RX_OK | RX_ERROR)) == RX_OK) { - - /* Malloc up new buffer. */ - struct sk_buff *skb; - - dev->stats.rx_bytes+=rcv_size; - rcv_size &= 0x3fff; - skb = netdev_alloc_skb(dev, rcv_size + 5); - if (skb == NULL) { - printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - rcv_car = lp->rx_start + RCV_HEADER + rcv_size; - lp->rx_start = rcv_next_frame; - outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG); - - break; - } - skb_reserve(skb,2); - - if (lp->version == LAN595) - insw(ioaddr+IO_PORT, skb_put(skb,rcv_size), (rcv_size + 3) >> 1); - else { /* LAN595TX or LAN595FX, capable of 32-bit I/O processing */ - unsigned short temp = inb(ioaddr + INT_MASK_REG); - outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG); - insl(ioaddr+IO_PORT_32_BIT, skb_put(skb,rcv_size), - (rcv_size + 3) >> 2); - outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG); - } - - skb->protocol = eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - } - - else { /* Not sure will ever reach here, - I set the 595 to discard bad received frames */ - dev->stats.rx_errors++; - - if (rcv_status & 0x0100) - dev->stats.rx_over_errors++; - - else if (rcv_status & 0x0400) - dev->stats.rx_frame_errors++; - - else if (rcv_status & 0x0800) - dev->stats.rx_crc_errors++; - - printk(KERN_DEBUG "%s: event = %#x, status = %#x, next = %#x, size = %#x\n", - dev->name, rcv_event, rcv_status, rcv_next_frame, rcv_size); - } - - if (rcv_status & 0x1000) - dev->stats.rx_length_errors++; - - rcv_car = lp->rx_start + RCV_HEADER + rcv_size; - lp->rx_start = rcv_next_frame; - - if (--boguscount == 0) - break; - - outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG); - rcv_event = inw(ioaddr + IO_PORT); - - } - if (rcv_car == 0) - rcv_car = lp->rcv_upper_limit | 0xff; - - outw(rcv_car - 1, ioaddr + RCV_STOP); - - if (net_debug > 5) - printk(KERN_DEBUG "%s: exiting eepro_rx routine.\n", dev->name); -} - -static void -eepro_transmit_interrupt(struct net_device *dev) -{ - struct eepro_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - short boguscount = 25; - short xmt_status; - - while ((lp->tx_start != lp->tx_end) && boguscount--) { - - outw(lp->tx_start, ioaddr + HOST_ADDRESS_REG); - xmt_status = inw(ioaddr+IO_PORT); - - if (!(xmt_status & TX_DONE_BIT)) - break; - - xmt_status = inw(ioaddr+IO_PORT); - lp->tx_start = inw(ioaddr+IO_PORT); - - netif_wake_queue (dev); - - if (xmt_status & TX_OK) - dev->stats.tx_packets++; - else { - dev->stats.tx_errors++; - if (xmt_status & 0x0400) { - dev->stats.tx_carrier_errors++; - printk(KERN_DEBUG "%s: carrier error\n", - dev->name); - printk(KERN_DEBUG "%s: XMT status = %#x\n", - dev->name, xmt_status); - } - else { - printk(KERN_DEBUG "%s: XMT status = %#x\n", - dev->name, xmt_status); - printk(KERN_DEBUG "%s: XMT status = %#x\n", - dev->name, xmt_status); - } - } - if (xmt_status & 0x000f) { - dev->stats.collisions += (xmt_status & 0x000f); - } - - if ((xmt_status & 0x0040) == 0x0) { - dev->stats.tx_heartbeat_errors++; - } - } -} - -static int eepro_ethtool_get_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - struct eepro_local *lp = netdev_priv(dev); - - cmd->supported = SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_Autoneg; - cmd->advertising = ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_Autoneg; - - if (GetBit(lp->word[5], ee_PortTPE)) { - cmd->supported |= SUPPORTED_TP; - cmd->advertising |= ADVERTISED_TP; - } - if (GetBit(lp->word[5], ee_PortBNC)) { - cmd->supported |= SUPPORTED_BNC; - cmd->advertising |= ADVERTISED_BNC; - } - if (GetBit(lp->word[5], ee_PortAUI)) { - cmd->supported |= SUPPORTED_AUI; - cmd->advertising |= ADVERTISED_AUI; - } - - ethtool_cmd_speed_set(cmd, SPEED_10); - - if (dev->if_port == TPE && lp->word[1] & ee_Duplex) { - cmd->duplex = DUPLEX_FULL; - } - else { - cmd->duplex = DUPLEX_HALF; - } - - cmd->port = dev->if_port; - cmd->phy_address = dev->base_addr; - cmd->transceiver = XCVR_INTERNAL; - - if (lp->word[0] & ee_AutoNeg) { - cmd->autoneg = 1; - } - - return 0; -} - -static void eepro_ethtool_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *drvinfo) -{ - strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver)); - strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version)); - snprintf(drvinfo->bus_info, sizeof(drvinfo->bus_info), - "ISA 0x%lx", dev->base_addr); -} - -static const struct ethtool_ops eepro_ethtool_ops = { - .get_settings = eepro_ethtool_get_settings, - .get_drvinfo = eepro_ethtool_get_drvinfo, -}; - -#ifdef MODULE - -#define MAX_EEPRO 8 -static struct net_device *dev_eepro[MAX_EEPRO]; - -static int io[MAX_EEPRO] = { - [0 ... MAX_EEPRO-1] = -1 -}; -static int irq[MAX_EEPRO]; -static int mem[MAX_EEPRO] = { /* Size of the rx buffer in KB */ - [0 ... MAX_EEPRO-1] = RCV_DEFAULT_RAM/1024 -}; -static int autodetect; - -static int n_eepro; -/* For linux 2.1.xx */ - -MODULE_AUTHOR("Pascal Dupuis and others"); -MODULE_DESCRIPTION("Intel i82595 ISA EtherExpressPro10/10+ driver"); -MODULE_LICENSE("GPL"); - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); -module_param(autodetect, int, 0); -MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)"); -MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)"); -MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)"); -MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)"); - -int __init init_module(void) -{ - struct net_device *dev; - int i; - if (io[0] == -1 && autodetect == 0) { - printk(KERN_WARNING "eepro_init_module: Probe is very dangerous in ISA boards!\n"); - printk(KERN_WARNING "eepro_init_module: Please add \"autodetect=1\" to force probe\n"); - return -ENODEV; - } - else if (autodetect) { - /* if autodetect is set then we must force detection */ - for (i = 0; i < MAX_EEPRO; i++) { - io[i] = 0; - } - - printk(KERN_INFO "eepro_init_module: Auto-detecting boards (May God protect us...)\n"); - } - - for (i = 0; i < MAX_EEPRO && io[i] != -1; i++) { - dev = alloc_etherdev(sizeof(struct eepro_local)); - if (!dev) - break; - - dev->mem_end = mem[i]; - dev->base_addr = io[i]; - dev->irq = irq[i]; - - if (do_eepro_probe(dev) == 0) { - dev_eepro[n_eepro++] = dev; - continue; - } - free_netdev(dev); - break; - } - - if (n_eepro) - printk(KERN_INFO "%s", version); - - return n_eepro ? 0 : -ENODEV; -} - -void __exit -cleanup_module(void) -{ - int i; - - for (i=0; i<n_eepro; i++) { - struct net_device *dev = dev_eepro[i]; - unregister_netdev(dev); - release_region(dev->base_addr, EEPRO_IO_EXTENT); - free_netdev(dev); - } -} -#endif /* MODULE */ diff --git a/drivers/net/ethernet/i825xx/eexpress.c b/drivers/net/ethernet/i825xx/eexpress.c deleted file mode 100644 index 7a6a2f0..0000000 --- a/drivers/net/ethernet/i825xx/eexpress.c +++ /dev/null @@ -1,1661 +0,0 @@ -/* Intel EtherExpress 16 device driver for Linux - * - * Written by John Sullivan, 1995 - * based on original code by Donald Becker, with changes by - * Alan Cox and Pauline Middelink. - * - * Support for 8-bit mode by Zoltan Szilagyi <zoltans@cs.arizona.edu> - * - * Many modifications, and currently maintained, by - * Philip Blundell <philb@gnu.org> - * Added the Compaq LTE Alan Cox <alan@lxorguk.ukuu.org.uk> - * Added MCA support Adam Fritzler (now deleted) - * - * Note - this driver is experimental still - it has problems on faster - * machines. Someone needs to sit down and go through it line by line with - * a databook... - */ - -/* The EtherExpress 16 is a fairly simple card, based on a shared-memory - * design using the i82586 Ethernet coprocessor. It bears no relationship, - * as far as I know, to the similarly-named "EtherExpress Pro" range. - * - * Historically, Linux support for these cards has been very bad. However, - * things seem to be getting better slowly. - */ - -/* If your card is confused about what sort of interface it has (eg it - * persistently reports "10baseT" when none is fitted), running 'SOFTSET /BART' - * or 'SOFTSET /LISA' from DOS seems to help. - */ - -/* Here's the scoop on memory mapping. - * - * There are three ways to access EtherExpress card memory: either using the - * shared-memory mapping, or using PIO through the dataport, or using PIO - * through the "shadow memory" ports. - * - * The shadow memory system works by having the card map some of its memory - * as follows: - * - * (the low five bits of the SMPTR are ignored) - * - * base+0x4000..400f memory at SMPTR+0..15 - * base+0x8000..800f memory at SMPTR+16..31 - * base+0xc000..c007 dubious stuff (memory at SMPTR+16..23 apparently) - * base+0xc008..c00f memory at 0x0008..0x000f - * - * This last set (the one at c008) is particularly handy because the SCB - * lives at 0x0008. So that set of ports gives us easy random access to data - * in the SCB without having to mess around setting up pointers and the like. - * We always use this method to access the SCB (via the scb_xx() functions). - * - * Dataport access works by aiming the appropriate (read or write) pointer - * at the first address you're interested in, and then reading or writing from - * the dataport. The pointers auto-increment after each transfer. We use - * this for data transfer. - * - * We don't use the shared-memory system because it allegedly doesn't work on - * all cards, and because it's a bit more prone to go wrong (it's one more - * thing to configure...). - */ - -/* Known bugs: - * - * - The card seems to want to give us two interrupts every time something - * happens, where just one would be better. - */ - -/* - * - * Note by Zoltan Szilagyi 10-12-96: - * - * I've succeeded in eliminating the "CU wedged" messages, and hence the - * lockups, which were only occurring with cards running in 8-bit mode ("force - * 8-bit operation" in Intel's SoftSet utility). This version of the driver - * sets the 82586 and the ASIC to 8-bit mode at startup; it also stops the - * CU before submitting a packet for transmission, and then restarts it as soon - * as the process of handing the packet is complete. This is definitely an - * unnecessary slowdown if the card is running in 16-bit mode; therefore one - * should detect 16-bit vs 8-bit mode from the EEPROM settings and act - * accordingly. In 8-bit mode with this bugfix I'm getting about 150 K/s for - * ftp's, which is significantly better than I get in DOS, so the overhead of - * stopping and restarting the CU with each transmit is not prohibitive in - * practice. - * - * Update by David Woodhouse 11/5/99: - * - * I've seen "CU wedged" messages in 16-bit mode, on the Alpha architecture. - * I assume that this is because 16-bit accesses are actually handled as two - * 8-bit accesses. - */ - -#ifdef __alpha__ -#define LOCKUP16 1 -#endif -#ifndef LOCKUP16 -#define LOCKUP16 0 -#endif - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/in.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/spinlock.h> -#include <linux/bitops.h> -#include <linux/jiffies.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#ifndef NET_DEBUG -#define NET_DEBUG 4 -#endif - -#include "eexpress.h" - -#define EEXP_IO_EXTENT 16 - -/* - * Private data declarations - */ - -struct net_local -{ - unsigned long last_tx; /* jiffies when last transmit started */ - unsigned long init_time; /* jiffies when eexp_hw_init586 called */ - unsigned short rx_first; /* first rx buf, same as RX_BUF_START */ - unsigned short rx_last; /* last rx buf */ - unsigned short rx_ptr; /* first rx buf to look at */ - unsigned short tx_head; /* next free tx buf */ - unsigned short tx_reap; /* first in-use tx buf */ - unsigned short tx_tail; /* previous tx buf to tx_head */ - unsigned short tx_link; /* last known-executing tx buf */ - unsigned short last_tx_restart; /* set to tx_link when we - restart the CU */ - unsigned char started; - unsigned short rx_buf_start; - unsigned short rx_buf_end; - unsigned short num_tx_bufs; - unsigned short num_rx_bufs; - unsigned char width; /* 0 for 16bit, 1 for 8bit */ - unsigned char was_promisc; - unsigned char old_mc_count; - spinlock_t lock; -}; - -/* This is the code and data that is downloaded to the EtherExpress card's - * memory at boot time. - */ - -static unsigned short start_code[] = { -/* 0x0000 */ - 0x0001, /* ISCP: busy - cleared after reset */ - 0x0008,0x0000,0x0000, /* offset,address (lo,hi) of SCB */ - - 0x0000,0x0000, /* SCB: status, commands */ - 0x0000,0x0000, /* links to first command block, - first receive descriptor */ - 0x0000,0x0000, /* CRC error, alignment error counts */ - 0x0000,0x0000, /* out of resources, overrun error counts */ - - 0x0000,0x0000, /* pad */ - 0x0000,0x0000, - -/* 0x20 -- start of 82586 CU program */ -#define CONF_LINK 0x20 - 0x0000,Cmd_Config, - 0x0032, /* link to next command */ - 0x080c, /* 12 bytes follow : fifo threshold=8 */ - 0x2e40, /* don't rx bad frames - * SRDY/ARDY => ext. sync. : preamble len=8 - * take addresses from data buffers - * 6 bytes/address - */ - 0x6000, /* default backoff method & priority - * interframe spacing = 0x60 */ - 0xf200, /* slot time=0x200 - * max collision retry = 0xf */ -#define CONF_PROMISC 0x2e - 0x0000, /* no HDLC : normal CRC : enable broadcast - * disable promiscuous/multicast modes */ - 0x003c, /* minimum frame length = 60 octets) */ - - 0x0000,Cmd_SetAddr, - 0x003e, /* link to next command */ -#define CONF_HWADDR 0x38 - 0x0000,0x0000,0x0000, /* hardware address placed here */ - - 0x0000,Cmd_MCast, - 0x0076, /* link to next command */ -#define CONF_NR_MULTICAST 0x44 - 0x0000, /* number of bytes in multicast address(es) */ -#define CONF_MULTICAST 0x46 - 0x0000, 0x0000, 0x0000, /* some addresses */ - 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, - -#define CONF_DIAG_RESULT 0x76 - 0x0000, Cmd_Diag, - 0x007c, /* link to next command */ - - 0x0000,Cmd_TDR|Cmd_INT, - 0x0084, -#define CONF_TDR_RESULT 0x82 - 0x0000, - - 0x0000,Cmd_END|Cmd_Nop, /* end of configure sequence */ - 0x0084 /* dummy link */ -}; - -/* maps irq number to EtherExpress magic value */ -static char irqrmap[] = { 0,0,1,2,3,4,0,0,0,1,5,6,0,0,0,0 }; - -/* - * Prototypes for Linux interface - */ - -static int eexp_open(struct net_device *dev); -static int eexp_close(struct net_device *dev); -static void eexp_timeout(struct net_device *dev); -static netdev_tx_t eexp_xmit(struct sk_buff *buf, - struct net_device *dev); - -static irqreturn_t eexp_irq(int irq, void *dev_addr); -static void eexp_set_multicast(struct net_device *dev); - -/* - * Prototypes for hardware access functions - */ - -static void eexp_hw_rx_pio(struct net_device *dev); -static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf, - unsigned short len); -static int eexp_hw_probe(struct net_device *dev,unsigned short ioaddr); -static unsigned short eexp_hw_readeeprom(unsigned short ioaddr, - unsigned char location); - -static unsigned short eexp_hw_lasttxstat(struct net_device *dev); -static void eexp_hw_txrestart(struct net_device *dev); - -static void eexp_hw_txinit (struct net_device *dev); -static void eexp_hw_rxinit (struct net_device *dev); - -static void eexp_hw_init586 (struct net_device *dev); -static void eexp_setup_filter (struct net_device *dev); - -static char *eexp_ifmap[]={"AUI", "BNC", "RJ45"}; -enum eexp_iftype {AUI=0, BNC=1, TPE=2}; - -#define STARTED_RU 2 -#define STARTED_CU 1 - -/* - * Primitive hardware access functions. - */ - -static inline unsigned short scb_status(struct net_device *dev) -{ - return inw(dev->base_addr + 0xc008); -} - -static inline unsigned short scb_rdcmd(struct net_device *dev) -{ - return inw(dev->base_addr + 0xc00a); -} - -static inline void scb_command(struct net_device *dev, unsigned short cmd) -{ - outw(cmd, dev->base_addr + 0xc00a); -} - -static inline void scb_wrcbl(struct net_device *dev, unsigned short val) -{ - outw(val, dev->base_addr + 0xc00c); -} - -static inline void scb_wrrfa(struct net_device *dev, unsigned short val) -{ - outw(val, dev->base_addr + 0xc00e); -} - -static inline void set_loopback(struct net_device *dev) -{ - outb(inb(dev->base_addr + Config) | 2, dev->base_addr + Config); -} - -static inline void clear_loopback(struct net_device *dev) -{ - outb(inb(dev->base_addr + Config) & ~2, dev->base_addr + Config); -} - -static inline unsigned short int SHADOW(short int addr) -{ - addr &= 0x1f; - if (addr > 0xf) addr += 0x3ff0; - return addr + 0x4000; -} - -/* - * Linux interface - */ - -/* - * checks for presence of EtherExpress card - */ - -static int __init do_express_probe(struct net_device *dev) -{ - unsigned short *port; - static unsigned short ports[] = { 0x240,0x300,0x310,0x270,0x320,0x340,0 }; - unsigned short ioaddr = dev->base_addr; - int dev_irq = dev->irq; - int err; - - dev->if_port = 0xff; /* not set */ - - if (ioaddr&0xfe00) { - if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress")) - return -EBUSY; - err = eexp_hw_probe(dev,ioaddr); - release_region(ioaddr, EEXP_IO_EXTENT); - return err; - } else if (ioaddr) - return -ENXIO; - - for (port=&ports[0] ; *port ; port++ ) - { - unsigned short sum = 0; - int i; - if (!request_region(*port, EEXP_IO_EXTENT, "EtherExpress")) - continue; - for ( i=0 ; i<4 ; i++ ) - { - unsigned short t; - t = inb(*port + ID_PORT); - sum |= (t>>4) << ((t & 0x03)<<2); - } - if (sum==0xbaba && !eexp_hw_probe(dev,*port)) { - release_region(*port, EEXP_IO_EXTENT); - return 0; - } - release_region(*port, EEXP_IO_EXTENT); - dev->irq = dev_irq; - } - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init express_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_express_probe(dev); - if (!err) - return dev; - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -/* - * open and initialize the adapter, ready for use - */ - -static int eexp_open(struct net_device *dev) -{ - int ret; - unsigned short ioaddr = dev->base_addr; - struct net_local *lp = netdev_priv(dev); - -#if NET_DEBUG > 6 - printk(KERN_DEBUG "%s: eexp_open()\n", dev->name); -#endif - - if (!dev->irq || !irqrmap[dev->irq]) - return -ENXIO; - - ret = request_irq(dev->irq, eexp_irq, 0, dev->name, dev); - if (ret) - return ret; - - if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress")) { - printk(KERN_WARNING "EtherExpress io port %x, is busy.\n" - , ioaddr); - goto err_out1; - } - if (!request_region(ioaddr+0x4000, EEXP_IO_EXTENT, "EtherExpress shadow")) { - printk(KERN_WARNING "EtherExpress io port %x, is busy.\n" - , ioaddr+0x4000); - goto err_out2; - } - if (!request_region(ioaddr+0x8000, EEXP_IO_EXTENT, "EtherExpress shadow")) { - printk(KERN_WARNING "EtherExpress io port %x, is busy.\n" - , ioaddr+0x8000); - goto err_out3; - } - if (!request_region(ioaddr+0xc000, EEXP_IO_EXTENT, "EtherExpress shadow")) { - printk(KERN_WARNING "EtherExpress io port %x, is busy.\n" - , ioaddr+0xc000); - goto err_out4; - } - - if (lp->width) { - printk("%s: forcing ASIC to 8-bit mode\n", dev->name); - outb(inb(dev->base_addr+Config)&~4, dev->base_addr+Config); - } - - eexp_hw_init586(dev); - netif_start_queue(dev); -#if NET_DEBUG > 6 - printk(KERN_DEBUG "%s: leaving eexp_open()\n", dev->name); -#endif - return 0; - - err_out4: - release_region(ioaddr+0x8000, EEXP_IO_EXTENT); - err_out3: - release_region(ioaddr+0x4000, EEXP_IO_EXTENT); - err_out2: - release_region(ioaddr, EEXP_IO_EXTENT); - err_out1: - free_irq(dev->irq, dev); - return -EBUSY; -} - -/* - * close and disable the interface, leaving the 586 in reset. - */ - -static int eexp_close(struct net_device *dev) -{ - unsigned short ioaddr = dev->base_addr; - struct net_local *lp = netdev_priv(dev); - - int irq = dev->irq; - - netif_stop_queue(dev); - - outb(SIRQ_dis|irqrmap[irq],ioaddr+SET_IRQ); - lp->started = 0; - scb_command(dev, SCB_CUsuspend|SCB_RUsuspend); - outb(0,ioaddr+SIGNAL_CA); - free_irq(irq,dev); - outb(i586_RST,ioaddr+EEPROM_Ctrl); - release_region(ioaddr, EEXP_IO_EXTENT); - release_region(ioaddr+0x4000, 16); - release_region(ioaddr+0x8000, 16); - release_region(ioaddr+0xc000, 16); - - return 0; -} - -/* - * This gets called when a higher level thinks we are broken. Check that - * nothing has become jammed in the CU. - */ - -static void unstick_cu(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short ioaddr = dev->base_addr; - - if (lp->started) - { - if (time_after(jiffies, dev_trans_start(dev) + HZ/2)) - { - if (lp->tx_link==lp->last_tx_restart) - { - unsigned short boguscount=200,rsst; - printk(KERN_WARNING "%s: Retransmit timed out, status %04x, resetting...\n", - dev->name, scb_status(dev)); - eexp_hw_txinit(dev); - lp->last_tx_restart = 0; - scb_wrcbl(dev, lp->tx_link); - scb_command(dev, SCB_CUstart); - outb(0,ioaddr+SIGNAL_CA); - while (!SCB_complete(rsst=scb_status(dev))) - { - if (!--boguscount) - { - boguscount=200; - printk(KERN_WARNING "%s: Reset timed out status %04x, retrying...\n", - dev->name,rsst); - scb_wrcbl(dev, lp->tx_link); - scb_command(dev, SCB_CUstart); - outb(0,ioaddr+SIGNAL_CA); - } - } - netif_wake_queue(dev); - } - else - { - unsigned short status = scb_status(dev); - if (SCB_CUdead(status)) - { - unsigned short txstatus = eexp_hw_lasttxstat(dev); - printk(KERN_WARNING "%s: Transmit timed out, CU not active status %04x %04x, restarting...\n", - dev->name, status, txstatus); - eexp_hw_txrestart(dev); - } - else - { - unsigned short txstatus = eexp_hw_lasttxstat(dev); - if (netif_queue_stopped(dev) && !txstatus) - { - printk(KERN_WARNING "%s: CU wedged, status %04x %04x, resetting...\n", - dev->name,status,txstatus); - eexp_hw_init586(dev); - netif_wake_queue(dev); - } - else - { - printk(KERN_WARNING "%s: transmit timed out\n", dev->name); - } - } - } - } - } - else - { - if (time_after(jiffies, lp->init_time + 10)) - { - unsigned short status = scb_status(dev); - printk(KERN_WARNING "%s: i82586 startup timed out, status %04x, resetting...\n", - dev->name, status); - eexp_hw_init586(dev); - netif_wake_queue(dev); - } - } -} - -static void eexp_timeout(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); -#ifdef CONFIG_SMP - unsigned long flags; -#endif - int status; - - disable_irq(dev->irq); - - /* - * Best would be to use synchronize_irq(); spin_lock() here - * lets make it work first.. - */ - -#ifdef CONFIG_SMP - spin_lock_irqsave(&lp->lock, flags); -#endif - - status = scb_status(dev); - unstick_cu(dev); - printk(KERN_INFO "%s: transmit timed out, %s?\n", dev->name, - (SCB_complete(status)?"lost interrupt": - "board on fire")); - dev->stats.tx_errors++; - lp->last_tx = jiffies; - if (!SCB_complete(status)) { - scb_command(dev, SCB_CUabort); - outb(0,dev->base_addr+SIGNAL_CA); - } - netif_wake_queue(dev); -#ifdef CONFIG_SMP - spin_unlock_irqrestore(&lp->lock, flags); -#endif -} - -/* - * Called to transmit a packet, or to allow us to right ourselves - * if the kernel thinks we've died. - */ -static netdev_tx_t eexp_xmit(struct sk_buff *buf, struct net_device *dev) -{ - short length = buf->len; -#ifdef CONFIG_SMP - struct net_local *lp = netdev_priv(dev); - unsigned long flags; -#endif - -#if NET_DEBUG > 6 - printk(KERN_DEBUG "%s: eexp_xmit()\n", dev->name); -#endif - - if (buf->len < ETH_ZLEN) { - if (skb_padto(buf, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - - disable_irq(dev->irq); - - /* - * Best would be to use synchronize_irq(); spin_lock() here - * lets make it work first.. - */ - -#ifdef CONFIG_SMP - spin_lock_irqsave(&lp->lock, flags); -#endif - - { - unsigned short *data = (unsigned short *)buf->data; - - dev->stats.tx_bytes += length; - - eexp_hw_tx_pio(dev,data,length); - } - dev_kfree_skb(buf); -#ifdef CONFIG_SMP - spin_unlock_irqrestore(&lp->lock, flags); -#endif - enable_irq(dev->irq); - return NETDEV_TX_OK; -} - -/* - * Handle an EtherExpress interrupt - * If we've finished initializing, start the RU and CU up. - * If we've already started, reap tx buffers, handle any received packets, - * check to make sure we've not become wedged. - */ - -static unsigned short eexp_start_irq(struct net_device *dev, - unsigned short status) -{ - unsigned short ack_cmd = SCB_ack(status); - struct net_local *lp = netdev_priv(dev); - unsigned short ioaddr = dev->base_addr; - if ((dev->flags & IFF_UP) && !(lp->started & STARTED_CU)) { - short diag_status, tdr_status; - while (SCB_CUstat(status)==2) - status = scb_status(dev); -#if NET_DEBUG > 4 - printk("%s: CU went non-active (status %04x)\n", - dev->name, status); -#endif - - outw(CONF_DIAG_RESULT & ~31, ioaddr + SM_PTR); - diag_status = inw(ioaddr + SHADOW(CONF_DIAG_RESULT)); - if (diag_status & 1<<11) { - printk(KERN_WARNING "%s: 82586 failed self-test\n", - dev->name); - } else if (!(diag_status & 1<<13)) { - printk(KERN_WARNING "%s: 82586 self-test failed to complete\n", dev->name); - } - - outw(CONF_TDR_RESULT & ~31, ioaddr + SM_PTR); - tdr_status = inw(ioaddr + SHADOW(CONF_TDR_RESULT)); - if (tdr_status & (TDR_SHORT|TDR_OPEN)) { - printk(KERN_WARNING "%s: TDR reports cable %s at %d tick%s\n", dev->name, (tdr_status & TDR_SHORT)?"short":"broken", tdr_status & TDR_TIME, ((tdr_status & TDR_TIME) != 1) ? "s" : ""); - } - else if (tdr_status & TDR_XCVRPROBLEM) { - printk(KERN_WARNING "%s: TDR reports transceiver problem\n", dev->name); - } - else if (tdr_status & TDR_LINKOK) { -#if NET_DEBUG > 4 - printk(KERN_DEBUG "%s: TDR reports link OK\n", dev->name); -#endif - } else { - printk("%s: TDR is ga-ga (status %04x)\n", dev->name, - tdr_status); - } - - lp->started |= STARTED_CU; - scb_wrcbl(dev, lp->tx_link); - /* if the RU isn't running, start it now */ - if (!(lp->started & STARTED_RU)) { - ack_cmd |= SCB_RUstart; - scb_wrrfa(dev, lp->rx_buf_start); - lp->rx_ptr = lp->rx_buf_start; - lp->started |= STARTED_RU; - } - ack_cmd |= SCB_CUstart | 0x2000; - } - - if ((dev->flags & IFF_UP) && !(lp->started & STARTED_RU) && SCB_RUstat(status)==4) - lp->started|=STARTED_RU; - - return ack_cmd; -} - -static void eexp_cmd_clear(struct net_device *dev) -{ - unsigned long int oldtime = jiffies; - while (scb_rdcmd(dev) && (time_before(jiffies, oldtime + 10))); - if (scb_rdcmd(dev)) { - printk("%s: command didn't clear\n", dev->name); - } -} - -static irqreturn_t eexp_irq(int dummy, void *dev_info) -{ - struct net_device *dev = dev_info; - struct net_local *lp; - unsigned short ioaddr,status,ack_cmd; - unsigned short old_read_ptr, old_write_ptr; - - lp = netdev_priv(dev); - ioaddr = dev->base_addr; - - spin_lock(&lp->lock); - - old_read_ptr = inw(ioaddr+READ_PTR); - old_write_ptr = inw(ioaddr+WRITE_PTR); - - outb(SIRQ_dis|irqrmap[dev->irq], ioaddr+SET_IRQ); - - status = scb_status(dev); - -#if NET_DEBUG > 4 - printk(KERN_DEBUG "%s: interrupt (status %x)\n", dev->name, status); -#endif - - if (lp->started == (STARTED_CU | STARTED_RU)) { - - do { - eexp_cmd_clear(dev); - - ack_cmd = SCB_ack(status); - scb_command(dev, ack_cmd); - outb(0,ioaddr+SIGNAL_CA); - - eexp_cmd_clear(dev); - - if (SCB_complete(status)) { - if (!eexp_hw_lasttxstat(dev)) { - printk("%s: tx interrupt but no status\n", dev->name); - } - } - - if (SCB_rxdframe(status)) - eexp_hw_rx_pio(dev); - - status = scb_status(dev); - } while (status & 0xc000); - - if (SCB_RUdead(status)) - { - printk(KERN_WARNING "%s: RU stopped: status %04x\n", - dev->name,status); -#if 0 - printk(KERN_WARNING "%s: cur_rfd=%04x, cur_rbd=%04x\n", dev->name, lp->cur_rfd, lp->cur_rbd); - outw(lp->cur_rfd, ioaddr+READ_PTR); - printk(KERN_WARNING "%s: [%04x]\n", dev->name, inw(ioaddr+DATAPORT)); - outw(lp->cur_rfd+6, ioaddr+READ_PTR); - printk(KERN_WARNING "%s: rbd is %04x\n", dev->name, rbd= inw(ioaddr+DATAPORT)); - outw(rbd, ioaddr+READ_PTR); - printk(KERN_WARNING "%s: [%04x %04x] ", dev->name, inw(ioaddr+DATAPORT), inw(ioaddr+DATAPORT)); - outw(rbd+8, ioaddr+READ_PTR); - printk("[%04x]\n", inw(ioaddr+DATAPORT)); -#endif - dev->stats.rx_errors++; -#if 1 - eexp_hw_rxinit(dev); -#else - lp->cur_rfd = lp->first_rfd; -#endif - scb_wrrfa(dev, lp->rx_buf_start); - scb_command(dev, SCB_RUstart); - outb(0,ioaddr+SIGNAL_CA); - } - } else { - if (status & 0x8000) - ack_cmd = eexp_start_irq(dev, status); - else - ack_cmd = SCB_ack(status); - scb_command(dev, ack_cmd); - outb(0,ioaddr+SIGNAL_CA); - } - - eexp_cmd_clear(dev); - - outb(SIRQ_en|irqrmap[dev->irq], ioaddr+SET_IRQ); - -#if NET_DEBUG > 6 - printk("%s: leaving eexp_irq()\n", dev->name); -#endif - outw(old_read_ptr, ioaddr+READ_PTR); - outw(old_write_ptr, ioaddr+WRITE_PTR); - - spin_unlock(&lp->lock); - return IRQ_HANDLED; -} - -/* - * Hardware access functions - */ - -/* - * Set the cable type to use. - */ - -static void eexp_hw_set_interface(struct net_device *dev) -{ - unsigned char oldval = inb(dev->base_addr + 0x300e); - oldval &= ~0x82; - switch (dev->if_port) { - case TPE: - oldval |= 0x2; - case BNC: - oldval |= 0x80; - break; - } - outb(oldval, dev->base_addr+0x300e); - mdelay(20); -} - -/* - * Check all the receive buffers, and hand any received packets - * to the upper levels. Basic sanity check on each frame - * descriptor, though we don't bother trying to fix broken ones. - */ - -static void eexp_hw_rx_pio(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short rx_block = lp->rx_ptr; - unsigned short boguscount = lp->num_rx_bufs; - unsigned short ioaddr = dev->base_addr; - unsigned short status; - -#if NET_DEBUG > 6 - printk(KERN_DEBUG "%s: eexp_hw_rx()\n", dev->name); -#endif - - do { - unsigned short rfd_cmd, rx_next, pbuf, pkt_len; - - outw(rx_block, ioaddr + READ_PTR); - status = inw(ioaddr + DATAPORT); - - if (FD_Done(status)) - { - rfd_cmd = inw(ioaddr + DATAPORT); - rx_next = inw(ioaddr + DATAPORT); - pbuf = inw(ioaddr + DATAPORT); - - outw(pbuf, ioaddr + READ_PTR); - pkt_len = inw(ioaddr + DATAPORT); - - if (rfd_cmd!=0x0000) - { - printk(KERN_WARNING "%s: rfd_cmd not zero:0x%04x\n", - dev->name, rfd_cmd); - continue; - } - else if (pbuf!=rx_block+0x16) - { - printk(KERN_WARNING "%s: rfd and rbd out of sync 0x%04x 0x%04x\n", - dev->name, rx_block+0x16, pbuf); - continue; - } - else if ((pkt_len & 0xc000)!=0xc000) - { - printk(KERN_WARNING "%s: EOF or F not set on received buffer (%04x)\n", - dev->name, pkt_len & 0xc000); - continue; - } - else if (!FD_OK(status)) - { - dev->stats.rx_errors++; - if (FD_CRC(status)) - dev->stats.rx_crc_errors++; - if (FD_Align(status)) - dev->stats.rx_frame_errors++; - if (FD_Resrc(status)) - dev->stats.rx_fifo_errors++; - if (FD_DMA(status)) - dev->stats.rx_over_errors++; - if (FD_Short(status)) - dev->stats.rx_length_errors++; - } - else - { - struct sk_buff *skb; - pkt_len &= 0x3fff; - skb = netdev_alloc_skb(dev, pkt_len + 16); - if (skb == NULL) - { - printk(KERN_WARNING "%s: Memory squeeze, dropping packet\n",dev->name); - dev->stats.rx_dropped++; - break; - } - skb_reserve(skb, 2); - outw(pbuf+10, ioaddr+READ_PTR); - insw(ioaddr+DATAPORT, skb_put(skb,pkt_len),(pkt_len+1)>>1); - skb->protocol = eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - outw(rx_block, ioaddr+WRITE_PTR); - outw(0, ioaddr+DATAPORT); - outw(0, ioaddr+DATAPORT); - rx_block = rx_next; - } - } while (FD_Done(status) && boguscount--); - lp->rx_ptr = rx_block; -} - -/* - * Hand a packet to the card for transmission - * If we get here, we MUST have already checked - * to make sure there is room in the transmit - * buffer region. - */ - -static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf, - unsigned short len) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short ioaddr = dev->base_addr; - - if (LOCKUP16 || lp->width) { - /* Stop the CU so that there is no chance that it - jumps off to a bogus address while we are writing the - pointer to the next transmit packet in 8-bit mode -- - this eliminates the "CU wedged" errors in 8-bit mode. - (Zoltan Szilagyi 10-12-96) */ - scb_command(dev, SCB_CUsuspend); - outw(0xFFFF, ioaddr+SIGNAL_CA); - } - - outw(lp->tx_head, ioaddr + WRITE_PTR); - - outw(0x0000, ioaddr + DATAPORT); - outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT); - outw(lp->tx_head+0x08, ioaddr + DATAPORT); - outw(lp->tx_head+0x0e, ioaddr + DATAPORT); - - outw(0x0000, ioaddr + DATAPORT); - outw(0x0000, ioaddr + DATAPORT); - outw(lp->tx_head+0x08, ioaddr + DATAPORT); - - outw(0x8000|len, ioaddr + DATAPORT); - outw(-1, ioaddr + DATAPORT); - outw(lp->tx_head+0x16, ioaddr + DATAPORT); - outw(0, ioaddr + DATAPORT); - - outsw(ioaddr + DATAPORT, buf, (len+1)>>1); - - outw(lp->tx_tail+0xc, ioaddr + WRITE_PTR); - outw(lp->tx_head, ioaddr + DATAPORT); - - dev->trans_start = jiffies; - lp->tx_tail = lp->tx_head; - if (lp->tx_head==TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE)) - lp->tx_head = TX_BUF_START; - else - lp->tx_head += TX_BUF_SIZE; - if (lp->tx_head != lp->tx_reap) - netif_wake_queue(dev); - - if (LOCKUP16 || lp->width) { - /* Restart the CU so that the packet can actually - be transmitted. (Zoltan Szilagyi 10-12-96) */ - scb_command(dev, SCB_CUresume); - outw(0xFFFF, ioaddr+SIGNAL_CA); - } - - dev->stats.tx_packets++; - lp->last_tx = jiffies; -} - -static const struct net_device_ops eexp_netdev_ops = { - .ndo_open = eexp_open, - .ndo_stop = eexp_close, - .ndo_start_xmit = eexp_xmit, - .ndo_set_rx_mode = eexp_set_multicast, - .ndo_tx_timeout = eexp_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/* - * Sanity check the suspected EtherExpress card - * Read hardware address, reset card, size memory and initialize buffer - * memory pointers. These are held in netdev_priv(), in case someone has more - * than one card in a machine. - */ - -static int __init eexp_hw_probe(struct net_device *dev, unsigned short ioaddr) -{ - unsigned short hw_addr[3]; - unsigned char buswidth; - unsigned int memory_size; - int i; - unsigned short xsum = 0; - struct net_local *lp = netdev_priv(dev); - - printk("%s: EtherExpress 16 at %#x ",dev->name,ioaddr); - - outb(ASIC_RST, ioaddr+EEPROM_Ctrl); - outb(0, ioaddr+EEPROM_Ctrl); - udelay(500); - outb(i586_RST, ioaddr+EEPROM_Ctrl); - - hw_addr[0] = eexp_hw_readeeprom(ioaddr,2); - hw_addr[1] = eexp_hw_readeeprom(ioaddr,3); - hw_addr[2] = eexp_hw_readeeprom(ioaddr,4); - - /* Standard Address or Compaq LTE Address */ - if (!((hw_addr[2]==0x00aa && ((hw_addr[1] & 0xff00)==0x0000)) || - (hw_addr[2]==0x0080 && ((hw_addr[1] & 0xff00)==0x5F00)))) - { - printk(" rejected: invalid address %04x%04x%04x\n", - hw_addr[2],hw_addr[1],hw_addr[0]); - return -ENODEV; - } - - /* Calculate the EEPROM checksum. Carry on anyway if it's bad, - * though. - */ - for (i = 0; i < 64; i++) - xsum += eexp_hw_readeeprom(ioaddr, i); - if (xsum != 0xbaba) - printk(" (bad EEPROM xsum 0x%02x)", xsum); - - dev->base_addr = ioaddr; - for ( i=0 ; i<6 ; i++ ) - dev->dev_addr[i] = ((unsigned char *)hw_addr)[5-i]; - - { - static const char irqmap[] = { 0, 9, 3, 4, 5, 10, 11, 0 }; - unsigned short setupval = eexp_hw_readeeprom(ioaddr,0); - - /* Use the IRQ from EEPROM if none was given */ - if (!dev->irq) - dev->irq = irqmap[setupval>>13]; - - if (dev->if_port == 0xff) { - dev->if_port = !(setupval & 0x1000) ? AUI : - eexp_hw_readeeprom(ioaddr,5) & 0x1 ? TPE : BNC; - } - - buswidth = !((setupval & 0x400) >> 10); - } - - memset(lp, 0, sizeof(struct net_local)); - spin_lock_init(&lp->lock); - - printk("(IRQ %d, %s connector, %d-bit bus", dev->irq, - eexp_ifmap[dev->if_port], buswidth?8:16); - - if (!request_region(dev->base_addr + 0x300e, 1, "EtherExpress")) - return -EBUSY; - - eexp_hw_set_interface(dev); - - release_region(dev->base_addr + 0x300e, 1); - - /* Find out how much RAM we have on the card */ - outw(0, dev->base_addr + WRITE_PTR); - for (i = 0; i < 32768; i++) - outw(0, dev->base_addr + DATAPORT); - - for (memory_size = 0; memory_size < 64; memory_size++) - { - outw(memory_size<<10, dev->base_addr + READ_PTR); - if (inw(dev->base_addr+DATAPORT)) - break; - outw(memory_size<<10, dev->base_addr + WRITE_PTR); - outw(memory_size | 0x5000, dev->base_addr+DATAPORT); - outw(memory_size<<10, dev->base_addr + READ_PTR); - if (inw(dev->base_addr+DATAPORT) != (memory_size | 0x5000)) - break; - } - - /* Sort out the number of buffers. We may have 16, 32, 48 or 64k - * of RAM to play with. - */ - lp->num_tx_bufs = 4; - lp->rx_buf_end = 0x3ff6; - switch (memory_size) - { - case 64: - lp->rx_buf_end += 0x4000; - case 48: - lp->num_tx_bufs += 4; - lp->rx_buf_end += 0x4000; - case 32: - lp->rx_buf_end += 0x4000; - case 16: - printk(", %dk RAM)\n", memory_size); - break; - default: - printk(") bad memory size (%dk).\n", memory_size); - return -ENODEV; - break; - } - - lp->rx_buf_start = TX_BUF_START + (lp->num_tx_bufs*TX_BUF_SIZE); - lp->width = buswidth; - - dev->netdev_ops = &eexp_netdev_ops; - dev->watchdog_timeo = 2*HZ; - - return register_netdev(dev); -} - -/* - * Read a word from the EtherExpress on-board serial EEPROM. - * The EEPROM contains 64 words of 16 bits. - */ -static unsigned short __init eexp_hw_readeeprom(unsigned short ioaddr, - unsigned char location) -{ - unsigned short cmd = 0x180|(location&0x7f); - unsigned short rval = 0,wval = EC_CS|i586_RST; - int i; - - outb(EC_CS|i586_RST,ioaddr+EEPROM_Ctrl); - for (i=0x100 ; i ; i>>=1 ) - { - if (cmd&i) - wval |= EC_Wr; - else - wval &= ~EC_Wr; - - outb(wval,ioaddr+EEPROM_Ctrl); - outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl); - eeprom_delay(); - outb(wval,ioaddr+EEPROM_Ctrl); - eeprom_delay(); - } - wval &= ~EC_Wr; - outb(wval,ioaddr+EEPROM_Ctrl); - for (i=0x8000 ; i ; i>>=1 ) - { - outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl); - eeprom_delay(); - if (inb(ioaddr+EEPROM_Ctrl)&EC_Rd) - rval |= i; - outb(wval,ioaddr+EEPROM_Ctrl); - eeprom_delay(); - } - wval &= ~EC_CS; - outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl); - eeprom_delay(); - outb(wval,ioaddr+EEPROM_Ctrl); - eeprom_delay(); - return rval; -} - -/* - * Reap tx buffers and return last transmit status. - * if ==0 then either: - * a) we're not transmitting anything, so why are we here? - * b) we've died. - * otherwise, Stat_Busy(return) means we've still got some packets - * to transmit, Stat_Done(return) means our buffers should be empty - * again - */ - -static unsigned short eexp_hw_lasttxstat(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short tx_block = lp->tx_reap; - unsigned short status; - - if (!netif_queue_stopped(dev) && lp->tx_head==lp->tx_reap) - return 0x0000; - - do - { - outw(tx_block & ~31, dev->base_addr + SM_PTR); - status = inw(dev->base_addr + SHADOW(tx_block)); - if (!Stat_Done(status)) - { - lp->tx_link = tx_block; - return status; - } - else - { - lp->last_tx_restart = 0; - dev->stats.collisions += Stat_NoColl(status); - if (!Stat_OK(status)) - { - char *whatsup = NULL; - dev->stats.tx_errors++; - if (Stat_Abort(status)) - dev->stats.tx_aborted_errors++; - if (Stat_TNoCar(status)) { - whatsup = "aborted, no carrier"; - dev->stats.tx_carrier_errors++; - } - if (Stat_TNoCTS(status)) { - whatsup = "aborted, lost CTS"; - dev->stats.tx_carrier_errors++; - } - if (Stat_TNoDMA(status)) { - whatsup = "FIFO underran"; - dev->stats.tx_fifo_errors++; - } - if (Stat_TXColl(status)) { - whatsup = "aborted, too many collisions"; - dev->stats.tx_aborted_errors++; - } - if (whatsup) - printk(KERN_INFO "%s: transmit %s\n", - dev->name, whatsup); - } - else - dev->stats.tx_packets++; - } - if (tx_block == TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE)) - lp->tx_reap = tx_block = TX_BUF_START; - else - lp->tx_reap = tx_block += TX_BUF_SIZE; - netif_wake_queue(dev); - } - while (lp->tx_reap != lp->tx_head); - - lp->tx_link = lp->tx_tail + 0x08; - - return status; -} - -/* - * This should never happen. It is called when some higher routine detects - * that the CU has stopped, to try to restart it from the last packet we knew - * we were working on, or the idle loop if we had finished for the time. - */ - -static void eexp_hw_txrestart(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short ioaddr = dev->base_addr; - - lp->last_tx_restart = lp->tx_link; - scb_wrcbl(dev, lp->tx_link); - scb_command(dev, SCB_CUstart); - outb(0,ioaddr+SIGNAL_CA); - - { - unsigned short boguscount=50,failcount=5; - while (!scb_status(dev)) - { - if (!--boguscount) - { - if (--failcount) - { - printk(KERN_WARNING "%s: CU start timed out, status %04x, cmd %04x\n", dev->name, scb_status(dev), scb_rdcmd(dev)); - scb_wrcbl(dev, lp->tx_link); - scb_command(dev, SCB_CUstart); - outb(0,ioaddr+SIGNAL_CA); - boguscount = 100; - } - else - { - printk(KERN_WARNING "%s: Failed to restart CU, resetting board...\n",dev->name); - eexp_hw_init586(dev); - netif_wake_queue(dev); - return; - } - } - } - } -} - -/* - * Writes down the list of transmit buffers into card memory. Each - * entry consists of an 82586 transmit command, followed by a jump - * pointing to itself. When we want to transmit a packet, we write - * the data into the appropriate transmit buffer and then modify the - * preceding jump to point at the new transmit command. This means that - * the 586 command unit is continuously active. - */ - -static void eexp_hw_txinit(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short tx_block = TX_BUF_START; - unsigned short curtbuf; - unsigned short ioaddr = dev->base_addr; - - for ( curtbuf=0 ; curtbuf<lp->num_tx_bufs ; curtbuf++ ) - { - outw(tx_block, ioaddr + WRITE_PTR); - - outw(0x0000, ioaddr + DATAPORT); - outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT); - outw(tx_block+0x08, ioaddr + DATAPORT); - outw(tx_block+0x0e, ioaddr + DATAPORT); - - outw(0x0000, ioaddr + DATAPORT); - outw(0x0000, ioaddr + DATAPORT); - outw(tx_block+0x08, ioaddr + DATAPORT); - - outw(0x8000, ioaddr + DATAPORT); - outw(-1, ioaddr + DATAPORT); - outw(tx_block+0x16, ioaddr + DATAPORT); - outw(0x0000, ioaddr + DATAPORT); - - tx_block += TX_BUF_SIZE; - } - lp->tx_head = TX_BUF_START; - lp->tx_reap = TX_BUF_START; - lp->tx_tail = tx_block - TX_BUF_SIZE; - lp->tx_link = lp->tx_tail + 0x08; - lp->rx_buf_start = tx_block; - -} - -/* - * Write the circular list of receive buffer descriptors to card memory. - * The end of the list isn't marked, which means that the 82586 receive - * unit will loop until buffers become available (this avoids it giving us - * "out of resources" messages). - */ - -static void eexp_hw_rxinit(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short rx_block = lp->rx_buf_start; - unsigned short ioaddr = dev->base_addr; - - lp->num_rx_bufs = 0; - lp->rx_first = lp->rx_ptr = rx_block; - do - { - lp->num_rx_bufs++; - - outw(rx_block, ioaddr + WRITE_PTR); - - outw(0, ioaddr + DATAPORT); outw(0, ioaddr+DATAPORT); - outw(rx_block + RX_BUF_SIZE, ioaddr+DATAPORT); - outw(0xffff, ioaddr+DATAPORT); - - outw(0x0000, ioaddr+DATAPORT); - outw(0xdead, ioaddr+DATAPORT); - outw(0xdead, ioaddr+DATAPORT); - outw(0xdead, ioaddr+DATAPORT); - outw(0xdead, ioaddr+DATAPORT); - outw(0xdead, ioaddr+DATAPORT); - outw(0xdead, ioaddr+DATAPORT); - - outw(0x0000, ioaddr+DATAPORT); - outw(rx_block + RX_BUF_SIZE + 0x16, ioaddr+DATAPORT); - outw(rx_block + 0x20, ioaddr+DATAPORT); - outw(0, ioaddr+DATAPORT); - outw(RX_BUF_SIZE-0x20, ioaddr+DATAPORT); - - lp->rx_last = rx_block; - rx_block += RX_BUF_SIZE; - } while (rx_block <= lp->rx_buf_end-RX_BUF_SIZE); - - - /* Make first Rx frame descriptor point to first Rx buffer - descriptor */ - outw(lp->rx_first + 6, ioaddr+WRITE_PTR); - outw(lp->rx_first + 0x16, ioaddr+DATAPORT); - - /* Close Rx frame descriptor ring */ - outw(lp->rx_last + 4, ioaddr+WRITE_PTR); - outw(lp->rx_first, ioaddr+DATAPORT); - - /* Close Rx buffer descriptor ring */ - outw(lp->rx_last + 0x16 + 2, ioaddr+WRITE_PTR); - outw(lp->rx_first + 0x16, ioaddr+DATAPORT); - -} - -/* - * Un-reset the 586, and start the configuration sequence. We don't wait for - * this to finish, but allow the interrupt handler to start the CU and RU for - * us. We can't start the receive/transmission system up before we know that - * the hardware is configured correctly. - */ - -static void eexp_hw_init586(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned short ioaddr = dev->base_addr; - int i; - -#if NET_DEBUG > 6 - printk("%s: eexp_hw_init586()\n", dev->name); -#endif - - lp->started = 0; - - set_loopback(dev); - - outb(SIRQ_dis|irqrmap[dev->irq],ioaddr+SET_IRQ); - - /* Download the startup code */ - outw(lp->rx_buf_end & ~31, ioaddr + SM_PTR); - outw(lp->width?0x0001:0x0000, ioaddr + 0x8006); - outw(0x0000, ioaddr + 0x8008); - outw(0x0000, ioaddr + 0x800a); - outw(0x0000, ioaddr + 0x800c); - outw(0x0000, ioaddr + 0x800e); - - for (i = 0; i < ARRAY_SIZE(start_code) * 2; i+=32) { - int j; - outw(i, ioaddr + SM_PTR); - for (j = 0; j < 16 && (i+j)/2 < ARRAY_SIZE(start_code); j+=2) - outw(start_code[(i+j)/2], - ioaddr+0x4000+j); - for (j = 0; j < 16 && (i+j+16)/2 < ARRAY_SIZE(start_code); j+=2) - outw(start_code[(i+j+16)/2], - ioaddr+0x8000+j); - } - - /* Do we want promiscuous mode or multicast? */ - outw(CONF_PROMISC & ~31, ioaddr+SM_PTR); - i = inw(ioaddr+SHADOW(CONF_PROMISC)); - outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1), - ioaddr+SHADOW(CONF_PROMISC)); - lp->was_promisc = dev->flags & IFF_PROMISC; -#if 0 - eexp_setup_filter(dev); -#endif - - /* Write our hardware address */ - outw(CONF_HWADDR & ~31, ioaddr+SM_PTR); - outw(((unsigned short *)dev->dev_addr)[0], ioaddr+SHADOW(CONF_HWADDR)); - outw(((unsigned short *)dev->dev_addr)[1], - ioaddr+SHADOW(CONF_HWADDR+2)); - outw(((unsigned short *)dev->dev_addr)[2], - ioaddr+SHADOW(CONF_HWADDR+4)); - - eexp_hw_txinit(dev); - eexp_hw_rxinit(dev); - - outb(0,ioaddr+EEPROM_Ctrl); - mdelay(5); - - scb_command(dev, 0xf000); - outb(0,ioaddr+SIGNAL_CA); - - outw(0, ioaddr+SM_PTR); - - { - unsigned short rboguscount=50,rfailcount=5; - while (inw(ioaddr+0x4000)) - { - if (!--rboguscount) - { - printk(KERN_WARNING "%s: i82586 reset timed out, kicking...\n", - dev->name); - scb_command(dev, 0); - outb(0,ioaddr+SIGNAL_CA); - rboguscount = 100; - if (!--rfailcount) - { - printk(KERN_WARNING "%s: i82586 not responding, giving up.\n", - dev->name); - return; - } - } - } - } - - scb_wrcbl(dev, CONF_LINK); - scb_command(dev, 0xf000|SCB_CUstart); - outb(0,ioaddr+SIGNAL_CA); - - { - unsigned short iboguscount=50,ifailcount=5; - while (!scb_status(dev)) - { - if (!--iboguscount) - { - if (--ifailcount) - { - printk(KERN_WARNING "%s: i82586 initialization timed out, status %04x, cmd %04x\n", - dev->name, scb_status(dev), scb_rdcmd(dev)); - scb_wrcbl(dev, CONF_LINK); - scb_command(dev, 0xf000|SCB_CUstart); - outb(0,ioaddr+SIGNAL_CA); - iboguscount = 100; - } - else - { - printk(KERN_WARNING "%s: Failed to initialize i82586, giving up.\n",dev->name); - return; - } - } - } - } - - clear_loopback(dev); - outb(SIRQ_en|irqrmap[dev->irq],ioaddr+SET_IRQ); - - lp->init_time = jiffies; -#if NET_DEBUG > 6 - printk("%s: leaving eexp_hw_init586()\n", dev->name); -#endif -} - -static void eexp_setup_filter(struct net_device *dev) -{ - struct netdev_hw_addr *ha; - unsigned short ioaddr = dev->base_addr; - int count = netdev_mc_count(dev); - int i; - if (count > 8) { - printk(KERN_INFO "%s: too many multicast addresses (%d)\n", - dev->name, count); - count = 8; - } - - outw(CONF_NR_MULTICAST & ~31, ioaddr+SM_PTR); - outw(6*count, ioaddr+SHADOW(CONF_NR_MULTICAST)); - i = 0; - netdev_for_each_mc_addr(ha, dev) { - unsigned short *data = (unsigned short *) ha->addr; - - if (i == count) - break; - outw((CONF_MULTICAST+(6*i)) & ~31, ioaddr+SM_PTR); - outw(data[0], ioaddr+SHADOW(CONF_MULTICAST+(6*i))); - outw((CONF_MULTICAST+(6*i)+2) & ~31, ioaddr+SM_PTR); - outw(data[1], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+2)); - outw((CONF_MULTICAST+(6*i)+4) & ~31, ioaddr+SM_PTR); - outw(data[2], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+4)); - i++; - } -} - -/* - * Set or clear the multicast filter for this adaptor. - */ -static void -eexp_set_multicast(struct net_device *dev) -{ - unsigned short ioaddr = dev->base_addr; - struct net_local *lp = netdev_priv(dev); - int kick = 0, i; - if ((dev->flags & IFF_PROMISC) != lp->was_promisc) { - outw(CONF_PROMISC & ~31, ioaddr+SM_PTR); - i = inw(ioaddr+SHADOW(CONF_PROMISC)); - outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1), - ioaddr+SHADOW(CONF_PROMISC)); - lp->was_promisc = dev->flags & IFF_PROMISC; - kick = 1; - } - if (!(dev->flags & IFF_PROMISC)) { - eexp_setup_filter(dev); - if (lp->old_mc_count != netdev_mc_count(dev)) { - kick = 1; - lp->old_mc_count = netdev_mc_count(dev); - } - } - if (kick) { - unsigned long oj; - scb_command(dev, SCB_CUsuspend); - outb(0, ioaddr+SIGNAL_CA); - outb(0, ioaddr+SIGNAL_CA); -#if 0 - printk("%s: waiting for CU to go suspended\n", dev->name); -#endif - oj = jiffies; - while ((SCB_CUstat(scb_status(dev)) == 2) && - (time_before(jiffies, oj + 2000))); - if (SCB_CUstat(scb_status(dev)) == 2) - printk("%s: warning, CU didn't stop\n", dev->name); - lp->started &= ~(STARTED_CU); - scb_wrcbl(dev, CONF_LINK); - scb_command(dev, SCB_CUstart); - outb(0, ioaddr+SIGNAL_CA); - } -} - - -/* - * MODULE stuff - */ - -#ifdef MODULE - -#define EEXP_MAX_CARDS 4 /* max number of cards to support */ - -static struct net_device *dev_eexp[EEXP_MAX_CARDS]; -static int irq[EEXP_MAX_CARDS]; -static int io[EEXP_MAX_CARDS]; - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(io, "EtherExpress 16 I/O base address(es)"); -MODULE_PARM_DESC(irq, "EtherExpress 16 IRQ number(s)"); -MODULE_LICENSE("GPL"); - - -/* Ideally the user would give us io=, irq= for every card. If any parameters - * are specified, we verify and then use them. If no parameters are given, we - * autoprobe for one card only. - */ -int __init init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) { - dev = alloc_etherdev(sizeof(struct net_local)); - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - if (io[this_dev] == 0) { - if (this_dev) - break; - printk(KERN_NOTICE "eexpress.c: Module autoprobe not recommended, give io=xx.\n"); - } - if (do_express_probe(dev) == 0) { - dev_eexp[this_dev] = dev; - found++; - continue; - } - printk(KERN_WARNING "eexpress.c: Failed to register card at 0x%x.\n", io[this_dev]); - free_netdev(dev); - break; - } - if (found) - return 0; - return -ENXIO; -} - -void __exit cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) { - struct net_device *dev = dev_eexp[this_dev]; - if (dev) { - unregister_netdev(dev); - free_netdev(dev); - } - } -} -#endif - -/* - * Local Variables: - * c-file-style: "linux" - * tab-width: 8 - * End: - */ diff --git a/drivers/net/ethernet/i825xx/eexpress.h b/drivers/net/ethernet/i825xx/eexpress.h deleted file mode 100644 index dc9c6ea..0000000 --- a/drivers/net/ethernet/i825xx/eexpress.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - * eexpress.h: Intel EtherExpress16 defines - */ - -/* - * EtherExpress card register addresses - * as offsets from the base IO region (dev->base_addr) - */ - -#define DATAPORT 0x0000 -#define WRITE_PTR 0x0002 -#define READ_PTR 0x0004 -#define SIGNAL_CA 0x0006 -#define SET_IRQ 0x0007 -#define SM_PTR 0x0008 -#define MEM_Dec 0x000a -#define MEM_Ctrl 0x000b -#define MEM_Page_Ctrl 0x000c -#define Config 0x000d -#define EEPROM_Ctrl 0x000e -#define ID_PORT 0x000f -#define MEM_ECtrl 0x000f - -/* - * card register defines - */ - -/* SET_IRQ */ -#define SIRQ_en 0x08 -#define SIRQ_dis 0x00 - -/* EEPROM_Ctrl */ -#define EC_Clk 0x01 -#define EC_CS 0x02 -#define EC_Wr 0x04 -#define EC_Rd 0x08 -#define ASIC_RST 0x40 -#define i586_RST 0x80 - -#define eeprom_delay() { udelay(40); } - -/* - * i82586 Memory Configuration - */ - -/* (System Configuration Pointer) System start up block, read after 586_RST */ -#define SCP_START 0xfff6 - -/* Intermediate System Configuration Pointer */ -#define ISCP_START 0x0000 - -/* System Command Block */ -#define SCB_START 0x0008 - -/* Start of buffer region. Everything before this is used for control - * structures and the CU configuration program. The memory layout is - * determined in eexp_hw_probe(), once we know how much memory is - * available on the card. - */ - -#define TX_BUF_START 0x0100 - -#define TX_BUF_SIZE ((24+ETH_FRAME_LEN+31)&~0x1f) -#define RX_BUF_SIZE ((32+ETH_FRAME_LEN+31)&~0x1f) - -/* - * SCB defines - */ - -/* these functions take the SCB status word and test the relevant status bit */ -#define SCB_complete(s) (((s) & 0x8000) != 0) -#define SCB_rxdframe(s) (((s) & 0x4000) != 0) -#define SCB_CUdead(s) (((s) & 0x2000) != 0) -#define SCB_RUdead(s) (((s) & 0x1000) != 0) -#define SCB_ack(s) ((s) & 0xf000) - -/* Command unit status: 0=idle, 1=suspended, 2=active */ -#define SCB_CUstat(s) (((s)&0x0300)>>8) - -/* Receive unit status: 0=idle, 1=suspended, 2=out of resources, 4=ready */ -#define SCB_RUstat(s) (((s)&0x0070)>>4) - -/* SCB commands */ -#define SCB_CUnop 0x0000 -#define SCB_CUstart 0x0100 -#define SCB_CUresume 0x0200 -#define SCB_CUsuspend 0x0300 -#define SCB_CUabort 0x0400 -#define SCB_resetchip 0x0080 - -#define SCB_RUnop 0x0000 -#define SCB_RUstart 0x0010 -#define SCB_RUresume 0x0020 -#define SCB_RUsuspend 0x0030 -#define SCB_RUabort 0x0040 - -/* - * Command block defines - */ - -#define Stat_Done(s) (((s) & 0x8000) != 0) -#define Stat_Busy(s) (((s) & 0x4000) != 0) -#define Stat_OK(s) (((s) & 0x2000) != 0) -#define Stat_Abort(s) (((s) & 0x1000) != 0) -#define Stat_STFail (((s) & 0x0800) != 0) -#define Stat_TNoCar(s) (((s) & 0x0400) != 0) -#define Stat_TNoCTS(s) (((s) & 0x0200) != 0) -#define Stat_TNoDMA(s) (((s) & 0x0100) != 0) -#define Stat_TDefer(s) (((s) & 0x0080) != 0) -#define Stat_TColl(s) (((s) & 0x0040) != 0) -#define Stat_TXColl(s) (((s) & 0x0020) != 0) -#define Stat_NoColl(s) ((s) & 0x000f) - -/* Cmd_END will end AFTER the command if this is the first - * command block after an SCB_CUstart, but BEFORE the command - * for all subsequent commands. Best strategy is to place - * Cmd_INT on the last command in the sequence, followed by a - * dummy Cmd_Nop with Cmd_END after this. - */ - -#define Cmd_END 0x8000 -#define Cmd_SUS 0x4000 -#define Cmd_INT 0x2000 - -#define Cmd_Nop 0x0000 -#define Cmd_SetAddr 0x0001 -#define Cmd_Config 0x0002 -#define Cmd_MCast 0x0003 -#define Cmd_Xmit 0x0004 -#define Cmd_TDR 0x0005 -#define Cmd_Dump 0x0006 -#define Cmd_Diag 0x0007 - - -/* - * Frame Descriptor (Receive block) defines - */ - -#define FD_Done(s) (((s) & 0x8000) != 0) -#define FD_Busy(s) (((s) & 0x4000) != 0) -#define FD_OK(s) (((s) & 0x2000) != 0) - -#define FD_CRC(s) (((s) & 0x0800) != 0) -#define FD_Align(s) (((s) & 0x0400) != 0) -#define FD_Resrc(s) (((s) & 0x0200) != 0) -#define FD_DMA(s) (((s) & 0x0100) != 0) -#define FD_Short(s) (((s) & 0x0080) != 0) -#define FD_NoEOF(s) (((s) & 0x0040) != 0) - -struct rfd_header { - volatile unsigned long flags; - volatile unsigned short link; - volatile unsigned short rbd_offset; - volatile unsigned short dstaddr1; - volatile unsigned short dstaddr2; - volatile unsigned short dstaddr3; - volatile unsigned short srcaddr1; - volatile unsigned short srcaddr2; - volatile unsigned short srcaddr3; - volatile unsigned short length; - - /* This is actually a Receive Buffer Descriptor. The way we - * arrange memory means that an RBD always follows the RFD that - * points to it, so they might as well be in the same structure. - */ - volatile unsigned short actual_count; - volatile unsigned short next_rbd; - volatile unsigned short buf_addr1; - volatile unsigned short buf_addr2; - volatile unsigned short size; -}; - -/* Returned data from the Time Domain Reflectometer */ - -#define TDR_LINKOK (1<<15) -#define TDR_XCVRPROBLEM (1<<14) -#define TDR_OPEN (1<<13) -#define TDR_SHORT (1<<12) -#define TDR_TIME 0x7ff diff --git a/drivers/net/ethernet/i825xx/lp486e.c b/drivers/net/ethernet/i825xx/lp486e.c deleted file mode 100644 index 3735bfa..0000000 --- a/drivers/net/ethernet/i825xx/lp486e.c +++ /dev/null @@ -1,1337 +0,0 @@ -/* Intel Professional Workstation/panther ethernet driver */ -/* lp486e.c: A panther 82596 ethernet driver for linux. */ -/* - History and copyrights: - - Driver skeleton - Written 1993 by Donald Becker. - Copyright 1993 United States Government as represented by the Director, - National Security Agency. This software may only be used and - distributed according to the terms of the GNU General Public License - as modified by SRC, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - Apricot - Written 1994 by Mark Evans. - This driver is for the Apricot 82596 bus-master interface - - Modularised 12/94 Mark Evans - - Professional Workstation - Derived from apricot.c by Ard van Breemen - <ard@murphy.nl>|<ard@cstmel.hobby.nl>|<ard@cstmel.nl.eu.org> - - Credits: - Thanks to Murphy Software BV for letting me write this in their time. - Well, actually, I get paid doing this... - (Also: see http://www.murphy.nl for murphy, and my homepage ~ard for - more information on the Professional Workstation) - - Present version - aeb@cwi.nl -*/ -/* - There are currently two motherboards that I know of in the - professional workstation. The only one that I know is the - intel panther motherboard. -- ard -*/ -/* -The pws is equipped with an intel 82596. This is a very intelligent controller -which runs its own micro-code. Communication with the hostprocessor is done -through linked lists of commands and buffers in the hostprocessors memory. -A complete description of the 82596 is available from intel. Search for -a file called "29021806.pdf". It is a complete description of the chip itself. -To use it for the pws some additions are needed regarding generation of -the PORT and CA signal, and the interrupt glue needed for a pc. -I/O map: -PORT SIZE ACTION MEANING -0xCB0 2 WRITE Lower 16 bits for PORT command -0xCB2 2 WRITE Upper 16 bits for PORT command, and issue of PORT command -0xCB4 1 WRITE Generation of CA signal -0xCB8 1 WRITE Clear interrupt glue -All other communication is through memory! -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/dma.h> - -#define DRV_NAME "lp486e" - -/* debug print flags */ -#define LOG_SRCDST 0x80000000 -#define LOG_STATINT 0x40000000 -#define LOG_STARTINT 0x20000000 - -#define i596_debug debug - -static int i596_debug = 0; - -static const char * const medianame[] = { - "10baseT", "AUI", - "10baseT-FD", "AUI-FD", -}; - -#define LP486E_TOTAL_SIZE 16 - -#define I596_NULL (0xffffffff) - -#define CMD_EOL 0x8000 /* The last command of the list, stop. */ -#define CMD_SUSP 0x4000 /* Suspend after doing cmd. */ -#define CMD_INTR 0x2000 /* Interrupt after doing cmd. */ - -#define CMD_FLEX 0x0008 /* Enable flexible memory model */ - -enum commands { - CmdNOP = 0, - CmdIASetup = 1, - CmdConfigure = 2, - CmdMulticastList = 3, - CmdTx = 4, - CmdTDR = 5, - CmdDump = 6, - CmdDiagnose = 7 -}; - -#if 0 -static const char *CUcmdnames[8] = { "NOP", "IASetup", "Configure", "MulticastList", - "Tx", "TDR", "Dump", "Diagnose" }; -#endif - -/* Status word bits */ -#define STAT_CX 0x8000 /* The CU finished executing a command - with the Interrupt bit set */ -#define STAT_FR 0x4000 /* The RU finished receiving a frame */ -#define STAT_CNA 0x2000 /* The CU left the active state */ -#define STAT_RNR 0x1000 /* The RU left the active state */ -#define STAT_ACK (STAT_CX | STAT_FR | STAT_CNA | STAT_RNR) -#define STAT_CUS 0x0700 /* Status of CU: 0: idle, 1: suspended, - 2: active, 3-7: unused */ -#define STAT_RUS 0x00f0 /* Status of RU: 0: idle, 1: suspended, - 2: no resources, 4: ready, - 10: no resources due to no more RBDs, - 12: no more RBDs, other: unused */ -#define STAT_T 0x0008 /* Bus throttle timers loaded */ -#define STAT_ZERO 0x0807 /* Always zero */ - -#if 0 -static char *CUstates[8] = { - "idle", "suspended", "active", 0, 0, 0, 0, 0 -}; -static char *RUstates[16] = { - "idle", "suspended", "no resources", 0, "ready", 0, 0, 0, - 0, 0, "no RBDs", 0, "out of RBDs", 0, 0, 0 -}; - -static void -i596_out_status(int status) { - int bad = 0; - char *s; - - printk("status %4.4x:", status); - if (status == 0xffff) - printk(" strange..\n"); - else { - if (status & STAT_CX) - printk(" CU done"); - if (status & STAT_CNA) - printk(" CU stopped"); - if (status & STAT_FR) - printk(" got a frame"); - if (status & STAT_RNR) - printk(" RU stopped"); - if (status & STAT_T) - printk(" throttled"); - if (status & STAT_ZERO) - bad = 1; - s = CUstates[(status & STAT_CUS) >> 8]; - if (!s) - bad = 1; - else - printk(" CU(%s)", s); - s = RUstates[(status & STAT_RUS) >> 4]; - if (!s) - bad = 1; - else - printk(" RU(%s)", s); - if (bad) - printk(" bad status"); - printk("\n"); - } -} -#endif - -/* Command word bits */ -#define ACK_CX 0x8000 -#define ACK_FR 0x4000 -#define ACK_CNA 0x2000 -#define ACK_RNR 0x1000 - -#define CUC_START 0x0100 -#define CUC_RESUME 0x0200 -#define CUC_SUSPEND 0x0300 -#define CUC_ABORT 0x0400 - -#define RX_START 0x0010 -#define RX_RESUME 0x0020 -#define RX_SUSPEND 0x0030 -#define RX_ABORT 0x0040 - -typedef u32 phys_addr; - -static inline phys_addr -va_to_pa(void *x) { - return x ? virt_to_bus(x) : I596_NULL; -} - -static inline void * -pa_to_va(phys_addr x) { - return (x == I596_NULL) ? NULL : bus_to_virt(x); -} - -/* status bits for cmd */ -#define CMD_STAT_C 0x8000 /* CU command complete */ -#define CMD_STAT_B 0x4000 /* CU command in progress */ -#define CMD_STAT_OK 0x2000 /* CU command completed without errors */ -#define CMD_STAT_A 0x1000 /* CU command abnormally terminated */ - -struct i596_cmd { /* 8 bytes */ - unsigned short status; - unsigned short command; - phys_addr pa_next; /* va_to_pa(struct i596_cmd *next) */ -}; - -#define EOF 0x8000 -#define SIZE_MASK 0x3fff - -struct i596_tbd { - unsigned short size; - unsigned short pad; - phys_addr pa_next; /* va_to_pa(struct i596_tbd *next) */ - phys_addr pa_data; /* va_to_pa(char *data) */ - struct sk_buff *skb; -}; - -struct tx_cmd { - struct i596_cmd cmd; - phys_addr pa_tbd; /* va_to_pa(struct i596_tbd *tbd) */ - unsigned short size; - unsigned short pad; -}; - -/* status bits for rfd */ -#define RFD_STAT_C 0x8000 /* Frame reception complete */ -#define RFD_STAT_B 0x4000 /* Frame reception in progress */ -#define RFD_STAT_OK 0x2000 /* Frame received without errors */ -#define RFD_STATUS 0x1fff -#define RFD_LENGTH_ERR 0x1000 -#define RFD_CRC_ERR 0x0800 -#define RFD_ALIGN_ERR 0x0400 -#define RFD_NOBUFS_ERR 0x0200 -#define RFD_DMA_ERR 0x0100 /* DMA overrun failure to acquire system bus */ -#define RFD_SHORT_FRAME_ERR 0x0080 -#define RFD_NOEOP_ERR 0x0040 -#define RFD_TRUNC_ERR 0x0020 -#define RFD_MULTICAST 0x0002 /* 0: destination had our address - 1: destination was broadcast/multicast */ -#define RFD_COLLISION 0x0001 - -/* receive frame descriptor */ -struct i596_rfd { - unsigned short stat; - unsigned short cmd; - phys_addr pa_next; /* va_to_pa(struct i596_rfd *next) */ - phys_addr pa_rbd; /* va_to_pa(struct i596_rbd *rbd) */ - unsigned short count; - unsigned short size; - char data[1532]; -}; - -#define RBD_EL 0x8000 -#define RBD_P 0x4000 -#define RBD_SIZEMASK 0x3fff -#define RBD_EOF 0x8000 -#define RBD_F 0x4000 - -/* receive buffer descriptor */ -struct i596_rbd { - unsigned short size; - unsigned short pad; - phys_addr pa_next; /* va_to_pa(struct i596_tbd *next) */ - phys_addr pa_data; /* va_to_pa(char *data) */ - phys_addr pa_prev; /* va_to_pa(struct i596_tbd *prev) */ - - /* Driver private part */ - struct sk_buff *skb; -}; - -#define RX_RING_SIZE 64 -#define RX_SKBSIZE (ETH_FRAME_LEN+10) -#define RX_RBD_SIZE 32 - -/* System Control Block - 40 bytes */ -struct i596_scb { - u16 status; /* 0 */ - u16 command; /* 2 */ - phys_addr pa_cmd; /* 4 - va_to_pa(struct i596_cmd *cmd) */ - phys_addr pa_rfd; /* 8 - va_to_pa(struct i596_rfd *rfd) */ - u32 crc_err; /* 12 */ - u32 align_err; /* 16 */ - u32 resource_err; /* 20 */ - u32 over_err; /* 24 */ - u32 rcvdt_err; /* 28 */ - u32 short_err; /* 32 */ - u16 t_on; /* 36 */ - u16 t_off; /* 38 */ -}; - -/* Intermediate System Configuration Pointer - 8 bytes */ -struct i596_iscp { - u32 busy; /* 0 */ - phys_addr pa_scb; /* 4 - va_to_pa(struct i596_scb *scb) */ -}; - -/* System Configuration Pointer - 12 bytes */ -struct i596_scp { - u32 sysbus; /* 0 */ - u32 pad; /* 4 */ - phys_addr pa_iscp; /* 8 - va_to_pa(struct i596_iscp *iscp) */ -}; - -/* Selftest and dump results - needs 16-byte alignment */ -/* - * The size of the dump area is 304 bytes. When the dump is executed - * by the Port command an extra word will be appended to the dump area. - * The extra word is a copy of the Dump status word (containing the - * C, B, OK bits). [I find 0xa006, with a0 for C+OK and 6 for dump] - */ -struct i596_dump { - u16 dump[153]; /* (304 = 130h) + 2 bytes */ -}; - -struct i596_private { /* aligned to a 16-byte boundary */ - struct i596_scp scp; /* 0 - needs 16-byte alignment */ - struct i596_iscp iscp; /* 12 */ - struct i596_scb scb; /* 20 */ - u32 dummy; /* 60 */ - struct i596_dump dump; /* 64 - needs 16-byte alignment */ - - struct i596_cmd set_add; - char eth_addr[8]; /* directly follows set_add */ - - struct i596_cmd set_conf; - char i596_config[16]; /* directly follows set_conf */ - - struct i596_cmd tdr; - unsigned long tdr_stat; /* directly follows tdr */ - - int last_restart; - struct i596_rbd *rbd_list; - struct i596_rbd *rbd_tail; - struct i596_rfd *rx_tail; - struct i596_cmd *cmd_tail; - struct i596_cmd *cmd_head; - int cmd_backlog; - unsigned long last_cmd; - spinlock_t cmd_lock; -}; - -static char init_setup[14] = { - 0x8E, /* length 14 bytes, prefetch on */ - 0xC8, /* default: fifo to 8, monitor off */ - 0x40, /* default: don't save bad frames (apricot.c had 0x80) */ - 0x2E, /* (default is 0x26) - No source address insertion, 8 byte preamble */ - 0x00, /* default priority and backoff */ - 0x60, /* default interframe spacing */ - 0x00, /* default slot time LSB */ - 0xf2, /* default slot time and nr of retries */ - 0x00, /* default various bits - (0: promiscuous mode, 1: broadcast disable, - 2: encoding mode, 3: transmit on no CRS, - 4: no CRC insertion, 5: CRC type, - 6: bit stuffing, 7: padding) */ - 0x00, /* default carrier sense and collision detect */ - 0x40, /* default minimum frame length */ - 0xff, /* (default is 0xff, and that is what apricot.c has; - elp486.c has 0xfb: Enable crc append in memory.) */ - 0x00, /* default: not full duplex */ - 0x7f /* (default is 0x3f) multi IA */ -}; - -static int i596_open(struct net_device *dev); -static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t i596_interrupt(int irq, void *dev_id); -static int i596_close(struct net_device *dev); -static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd); -static void print_eth(char *); -static void set_multicast_list(struct net_device *dev); -static void i596_tx_timeout(struct net_device *dev); - -static int -i596_timeout(struct net_device *dev, char *msg, int ct) { - struct i596_private *lp; - int boguscnt = ct; - - lp = netdev_priv(dev); - while (lp->scb.command) { - if (--boguscnt == 0) { - printk("%s: %s timed out - stat %4.4x, cmd %4.4x\n", - dev->name, msg, - lp->scb.status, lp->scb.command); - return 1; - } - udelay(5); - barrier(); - } - return 0; -} - -static inline int -init_rx_bufs(struct net_device *dev, int num) { - struct i596_private *lp; - struct i596_rfd *rfd; - int i; - // struct i596_rbd *rbd; - - lp = netdev_priv(dev); - lp->scb.pa_rfd = I596_NULL; - - for (i = 0; i < num; i++) { - rfd = kmalloc(sizeof(struct i596_rfd), GFP_KERNEL); - if (rfd == NULL) - break; - - rfd->stat = 0; - rfd->pa_rbd = I596_NULL; - rfd->count = 0; - rfd->size = 1532; - if (i == 0) { - rfd->cmd = CMD_EOL; - lp->rx_tail = rfd; - } else { - rfd->cmd = 0; - } - rfd->pa_next = lp->scb.pa_rfd; - lp->scb.pa_rfd = va_to_pa(rfd); - lp->rx_tail->pa_next = lp->scb.pa_rfd; - } - -#if 0 - for (i = 0; i<RX_RBD_SIZE; i++) { - rbd = kmalloc(sizeof(struct i596_rbd), GFP_KERNEL); - if (rbd) { - rbd->pad = 0; - rbd->count = 0; - rbd->skb = dev_alloc_skb(RX_SKBSIZE); - if (!rbd->skb) { - printk("dev_alloc_skb failed"); - } - rbd->next = rfd->rbd; - if (i) { - rfd->rbd->prev = rbd; - rbd->size = RX_SKBSIZE; - } else { - rbd->size = (RX_SKBSIZE | RBD_EL); - lp->rbd_tail = rbd; - } - - rfd->rbd = rbd; - } - } - lp->rbd_tail->next = rfd->rbd; -#endif - return i; -} - -static inline void -remove_rx_bufs(struct net_device *dev) { - struct i596_private *lp; - struct i596_rfd *rfd; - - lp = netdev_priv(dev); - lp->rx_tail->pa_next = I596_NULL; - - do { - rfd = pa_to_va(lp->scb.pa_rfd); - lp->scb.pa_rfd = rfd->pa_next; - kfree(rfd); - } while (rfd != lp->rx_tail); - - lp->rx_tail = NULL; - -#if 0 - for (lp->rbd_list) { - } -#endif -} - -#define PORT_RESET 0x00 /* reset 82596 */ -#define PORT_SELFTEST 0x01 /* selftest */ -#define PORT_ALTSCP 0x02 /* alternate SCB address */ -#define PORT_DUMP 0x03 /* dump */ - -#define IOADDR 0xcb0 /* real constant */ -#define IRQ 10 /* default IRQ - can be changed by ECU */ - -/* The 82596 requires two 16-bit write cycles for a port command */ -static inline void -PORT(phys_addr a, unsigned int cmd) { - if (a & 0xf) - printk("lp486e.c: PORT: address not aligned\n"); - outw(((a & 0xffff) | cmd), IOADDR); - outw(((a>>16) & 0xffff), IOADDR+2); -} - -static inline void -CA(void) { - outb(0, IOADDR+4); - udelay(8); -} - -static inline void -CLEAR_INT(void) { - outb(0, IOADDR+8); -} - -#if 0 -/* selftest or dump */ -static void -i596_port_do(struct net_device *dev, int portcmd, char *cmdname) { - struct i596_private *lp = netdev_priv(dev); - u16 *outp; - int i, m; - - memset((void *)&(lp->dump), 0, sizeof(struct i596_dump)); - outp = &(lp->dump.dump[0]); - - PORT(va_to_pa(outp), portcmd); - mdelay(30); /* random, unmotivated */ - - printk("lp486e i82596 %s result:\n", cmdname); - for (m = ARRAY_SIZE(lp->dump.dump); m && lp->dump.dump[m-1] == 0; m--) - ; - for (i = 0; i < m; i++) { - printk(" %04x", lp->dump.dump[i]); - if (i%8 == 7) - printk("\n"); - } - printk("\n"); -} -#endif - -static int -i596_scp_setup(struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - int boguscnt; - - /* Setup SCP, ISCP, SCB */ - /* - * sysbus bits: - * only a single byte is significant - here 0x44 - * 0x80: big endian mode (details depend on stepping) - * 0x40: 1 - * 0x20: interrupt pin is active low - * 0x10: lock function disabled - * 0x08: external triggering of bus throttle timers - * 0x06: 00: 82586 compat mode, 01: segmented mode, 10: linear mode - * 0x01: unused - */ - lp->scp.sysbus = 0x00440000; /* linear mode */ - lp->scp.pad = 0; /* must be zero */ - lp->scp.pa_iscp = va_to_pa(&(lp->iscp)); - - /* - * The CPU sets the ISCP to 1 before it gives the first CA() - */ - lp->iscp.busy = 0x0001; - lp->iscp.pa_scb = va_to_pa(&(lp->scb)); - - lp->scb.command = 0; - lp->scb.status = 0; - lp->scb.pa_cmd = I596_NULL; - /* lp->scb.pa_rfd has been initialised already */ - - lp->last_cmd = jiffies; - lp->cmd_backlog = 0; - lp->cmd_head = NULL; - - /* - * Reset the 82596. - * We need to wait 10 systemclock cycles, and - * 5 serial clock cycles. - */ - PORT(0, PORT_RESET); /* address part ignored */ - udelay(100); - - /* - * Before the CA signal is asserted, the default SCP address - * (0x00fffff4) can be changed to a 16-byte aligned value - */ - PORT(va_to_pa(&lp->scp), PORT_ALTSCP); /* change the scp address */ - - /* - * The initialization procedure begins when a - * Channel Attention signal is asserted after a reset. - */ - - CA(); - - /* - * The ISCP busy is cleared by the 82596 after the SCB address is read. - */ - boguscnt = 100; - while (lp->iscp.busy) { - if (--boguscnt == 0) { - /* No i82596 present? */ - printk("%s: i82596 initialization timed out\n", - dev->name); - return 1; - } - udelay(5); - barrier(); - } - /* I find here boguscnt==100, so no delay was required. */ - - return 0; -} - -static int -init_i596(struct net_device *dev) { - struct i596_private *lp; - - if (i596_scp_setup(dev)) - return 1; - - lp = netdev_priv(dev); - lp->scb.command = 0; - - memcpy ((void *)lp->i596_config, init_setup, 14); - lp->set_conf.command = CmdConfigure; - i596_add_cmd(dev, (void *)&lp->set_conf); - - memcpy ((void *)lp->eth_addr, dev->dev_addr, 6); - lp->set_add.command = CmdIASetup; - i596_add_cmd(dev, &lp->set_add); - - lp->tdr.command = CmdTDR; - i596_add_cmd(dev, &lp->tdr); - - if (lp->scb.command && i596_timeout(dev, "i82596 init", 200)) - return 1; - - lp->scb.command = RX_START; - CA(); - - barrier(); - - if (lp->scb.command && i596_timeout(dev, "Receive Unit start", 100)) - return 1; - - return 0; -} - -/* Receive a single frame */ -static inline int -i596_rx_one(struct net_device *dev, struct i596_private *lp, - struct i596_rfd *rfd, int *frames) { - - if (rfd->stat & RFD_STAT_OK) { - /* a good frame */ - int pkt_len = (rfd->count & 0x3fff); - struct sk_buff *skb = netdev_alloc_skb(dev, pkt_len); - - (*frames)++; - - if (rfd->cmd & CMD_EOL) - printk("Received on EOL\n"); - - if (skb == NULL) { - printk ("%s: i596_rx Memory squeeze, " - "dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - return 1; - } - - memcpy(skb_put(skb,pkt_len), rfd->data, pkt_len); - - skb->protocol = eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - } else { -#if 0 - printk("Frame reception error status %04x\n", - rfd->stat); -#endif - dev->stats.rx_errors++; - if (rfd->stat & RFD_COLLISION) - dev->stats.collisions++; - if (rfd->stat & RFD_SHORT_FRAME_ERR) - dev->stats.rx_length_errors++; - if (rfd->stat & RFD_DMA_ERR) - dev->stats.rx_over_errors++; - if (rfd->stat & RFD_NOBUFS_ERR) - dev->stats.rx_fifo_errors++; - if (rfd->stat & RFD_ALIGN_ERR) - dev->stats.rx_frame_errors++; - if (rfd->stat & RFD_CRC_ERR) - dev->stats.rx_crc_errors++; - if (rfd->stat & RFD_LENGTH_ERR) - dev->stats.rx_length_errors++; - } - rfd->stat = rfd->count = 0; - return 0; -} - -static int -i596_rx(struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - struct i596_rfd *rfd; - int frames = 0; - - while (1) { - rfd = pa_to_va(lp->scb.pa_rfd); - if (!rfd) { - printk(KERN_ERR "i596_rx: NULL rfd?\n"); - return 0; - } -#if 1 - if (rfd->stat && !(rfd->stat & (RFD_STAT_C | RFD_STAT_B))) - printk("SF:%p-%04x\n", rfd, rfd->stat); -#endif - if (!(rfd->stat & RFD_STAT_C)) - break; /* next one not ready */ - if (i596_rx_one(dev, lp, rfd, &frames)) - break; /* out of memory */ - rfd->cmd = CMD_EOL; - lp->rx_tail->cmd = 0; - lp->rx_tail = rfd; - lp->scb.pa_rfd = rfd->pa_next; - barrier(); - } - - return frames; -} - -static void -i596_cleanup_cmd(struct net_device *dev) { - struct i596_private *lp; - struct i596_cmd *cmd; - - lp = netdev_priv(dev); - while (lp->cmd_head) { - cmd = lp->cmd_head; - - lp->cmd_head = pa_to_va(lp->cmd_head->pa_next); - lp->cmd_backlog--; - - switch ((cmd->command) & 0x7) { - case CmdTx: { - struct tx_cmd *tx_cmd = (struct tx_cmd *) cmd; - struct i596_tbd * tx_cmd_tbd; - tx_cmd_tbd = pa_to_va(tx_cmd->pa_tbd); - - dev_kfree_skb_any(tx_cmd_tbd->skb); - - dev->stats.tx_errors++; - dev->stats.tx_aborted_errors++; - - cmd->pa_next = I596_NULL; - kfree((unsigned char *)tx_cmd); - netif_wake_queue(dev); - break; - } - case CmdMulticastList: { - // unsigned short count = *((unsigned short *) (ptr + 1)); - - cmd->pa_next = I596_NULL; - kfree((unsigned char *)cmd); - break; - } - default: { - cmd->pa_next = I596_NULL; - break; - } - } - barrier(); - } - - if (lp->scb.command && i596_timeout(dev, "i596_cleanup_cmd", 100)) - ; - - lp->scb.pa_cmd = va_to_pa(lp->cmd_head); -} - -static void i596_reset(struct net_device *dev, struct i596_private *lp, int ioaddr) { - - if (lp->scb.command && i596_timeout(dev, "i596_reset", 100)) - ; - - netif_stop_queue(dev); - - lp->scb.command = CUC_ABORT | RX_ABORT; - CA(); - barrier(); - - /* wait for shutdown */ - if (lp->scb.command && i596_timeout(dev, "i596_reset(2)", 400)) - ; - - i596_cleanup_cmd(dev); - i596_rx(dev); - - netif_start_queue(dev); - /*dev_kfree_skb(skb, FREE_WRITE);*/ - init_i596(dev); -} - -static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd) { - struct i596_private *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - unsigned long flags; - - cmd->status = 0; - cmd->command |= (CMD_EOL | CMD_INTR); - cmd->pa_next = I596_NULL; - - spin_lock_irqsave(&lp->cmd_lock, flags); - - if (lp->cmd_head) { - lp->cmd_tail->pa_next = va_to_pa(cmd); - } else { - lp->cmd_head = cmd; - if (lp->scb.command && i596_timeout(dev, "i596_add_cmd", 100)) - ; - lp->scb.pa_cmd = va_to_pa(cmd); - lp->scb.command = CUC_START; - CA(); - } - lp->cmd_tail = cmd; - lp->cmd_backlog++; - - lp->cmd_head = pa_to_va(lp->scb.pa_cmd); - spin_unlock_irqrestore(&lp->cmd_lock, flags); - - if (lp->cmd_backlog > 16) { - int tickssofar = jiffies - lp->last_cmd; - if (tickssofar < HZ/4) - return; - - printk(KERN_WARNING "%s: command unit timed out, status resetting.\n", dev->name); - i596_reset(dev, lp, ioaddr); - } -} - -static int i596_open(struct net_device *dev) -{ - int i; - - i = request_irq(dev->irq, i596_interrupt, IRQF_SHARED, dev->name, dev); - if (i) { - printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq); - return i; - } - - if ((i = init_rx_bufs(dev, RX_RING_SIZE)) < RX_RING_SIZE) - printk(KERN_ERR "%s: only able to allocate %d receive buffers\n", dev->name, i); - - if (i < 4) { - free_irq(dev->irq, dev); - return -EAGAIN; - } - netif_start_queue(dev); - init_i596(dev); - return 0; /* Always succeed */ -} - -static netdev_tx_t i596_start_xmit (struct sk_buff *skb, struct net_device *dev) { - struct tx_cmd *tx_cmd; - short length; - - length = skb->len; - - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - - tx_cmd = kmalloc((sizeof (struct tx_cmd) + sizeof (struct i596_tbd)), GFP_ATOMIC); - if (tx_cmd == NULL) { - printk(KERN_WARNING "%s: i596_xmit Memory squeeze, dropping packet.\n", dev->name); - dev->stats.tx_dropped++; - dev_kfree_skb (skb); - } else { - struct i596_tbd *tx_cmd_tbd; - tx_cmd_tbd = (struct i596_tbd *) (tx_cmd + 1); - tx_cmd->pa_tbd = va_to_pa (tx_cmd_tbd); - tx_cmd_tbd->pa_next = I596_NULL; - - tx_cmd->cmd.command = (CMD_FLEX | CmdTx); - - tx_cmd->pad = 0; - tx_cmd->size = 0; - tx_cmd_tbd->pad = 0; - tx_cmd_tbd->size = (EOF | length); - - tx_cmd_tbd->pa_data = va_to_pa (skb->data); - tx_cmd_tbd->skb = skb; - - if (i596_debug & LOG_SRCDST) - print_eth (skb->data); - - i596_add_cmd (dev, (struct i596_cmd *) tx_cmd); - - dev->stats.tx_packets++; - } - - return NETDEV_TX_OK; -} - -static void -i596_tx_timeout (struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - /* Transmitter timeout, serious problems. */ - printk(KERN_WARNING "%s: transmit timed out, status resetting.\n", dev->name); - dev->stats.tx_errors++; - - /* Try to restart the adaptor */ - if (lp->last_restart == dev->stats.tx_packets) { - printk ("Resetting board.\n"); - - /* Shutdown and restart */ - i596_reset (dev, lp, ioaddr); - } else { - /* Issue a channel attention signal */ - printk ("Kicking board.\n"); - lp->scb.command = (CUC_START | RX_START); - CA(); - lp->last_restart = dev->stats.tx_packets; - } - netif_wake_queue(dev); -} - -static void print_eth(char *add) -{ - int i; - - printk ("Dest "); - for (i = 0; i < 6; i++) - printk(" %2.2X", (unsigned char) add[i]); - printk ("\n"); - - printk ("Source"); - for (i = 0; i < 6; i++) - printk(" %2.2X", (unsigned char) add[i+6]); - printk ("\n"); - - printk ("type %2.2X%2.2X\n", - (unsigned char) add[12], (unsigned char) add[13]); -} - -static const struct net_device_ops i596_netdev_ops = { - .ndo_open = i596_open, - .ndo_stop = i596_close, - .ndo_start_xmit = i596_start_xmit, - .ndo_set_rx_mode = set_multicast_list, - .ndo_tx_timeout = i596_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init lp486e_probe(struct net_device *dev) { - struct i596_private *lp; - unsigned char eth_addr[6] = { 0, 0xaa, 0, 0, 0, 0 }; - unsigned char *bios; - int i, j; - int ret = -ENOMEM; - static int probed; - - if (probed) - return -ENODEV; - probed++; - - if (!request_region(IOADDR, LP486E_TOTAL_SIZE, DRV_NAME)) { - printk(KERN_ERR "lp486e: IO address 0x%x in use\n", IOADDR); - return -EBUSY; - } - - lp = netdev_priv(dev); - spin_lock_init(&lp->cmd_lock); - - /* - * Do we really have this thing? - */ - if (i596_scp_setup(dev)) { - ret = -ENODEV; - goto err_out_kfree; - } - - dev->base_addr = IOADDR; - dev->irq = IRQ; - - - /* - * How do we find the ethernet address? I don't know. - * One possibility is to look at the EISA configuration area - * [0xe8000-0xe9fff]. This contains the ethernet address - * but not at a fixed address - things depend on setup options. - * - * If we find no address, or the wrong address, use - * ifconfig eth0 hw ether a1:a2:a3:a4:a5:a6 - * with the value found in the BIOS setup. - */ - bios = bus_to_virt(0xe8000); - for (j = 0; j < 0x2000; j++) { - if (bios[j] == 0 && bios[j+1] == 0xaa && bios[j+2] == 0) { - printk("%s: maybe address at BIOS 0x%x:", - dev->name, 0xe8000+j); - for (i = 0; i < 6; i++) { - eth_addr[i] = bios[i+j]; - printk(" %2.2X", eth_addr[i]); - } - printk("\n"); - } - } - - printk("%s: lp486e 82596 at %#3lx, IRQ %d,", - dev->name, dev->base_addr, dev->irq); - for (i = 0; i < 6; i++) - printk(" %2.2X", dev->dev_addr[i] = eth_addr[i]); - printk("\n"); - - /* The LP486E-specific entries in the device structure. */ - dev->netdev_ops = &i596_netdev_ops; - dev->watchdog_timeo = 5*HZ; - -#if 0 - /* selftest reports 0x320925ae - don't know what that means */ - i596_port_do(dev, PORT_SELFTEST, "selftest"); - i596_port_do(dev, PORT_DUMP, "dump"); -#endif - return 0; - -err_out_kfree: - release_region(IOADDR, LP486E_TOTAL_SIZE); - return ret; -} - -static inline void -i596_handle_CU_completion(struct net_device *dev, - struct i596_private *lp, - unsigned short status, - unsigned short *ack_cmdp) { - struct i596_cmd *cmd; - int frames_out = 0; - int commands_done = 0; - int cmd_val; - unsigned long flags; - - spin_lock_irqsave(&lp->cmd_lock, flags); - cmd = lp->cmd_head; - - while (lp->cmd_head && (lp->cmd_head->status & CMD_STAT_C)) { - cmd = lp->cmd_head; - - lp->cmd_head = pa_to_va(lp->cmd_head->pa_next); - lp->cmd_backlog--; - - commands_done++; - cmd_val = cmd->command & 0x7; -#if 0 - printk("finished CU %s command (%d)\n", - CUcmdnames[cmd_val], cmd_val); -#endif - switch (cmd_val) { - case CmdTx: - { - struct tx_cmd *tx_cmd; - struct i596_tbd *tx_cmd_tbd; - - tx_cmd = (struct tx_cmd *) cmd; - tx_cmd_tbd = pa_to_va(tx_cmd->pa_tbd); - - frames_out++; - if (cmd->status & CMD_STAT_OK) { - if (i596_debug) - print_eth(pa_to_va(tx_cmd_tbd->pa_data)); - } else { - dev->stats.tx_errors++; - if (i596_debug) - printk("transmission failure:%04x\n", - cmd->status); - if (cmd->status & 0x0020) - dev->stats.collisions++; - if (!(cmd->status & 0x0040)) - dev->stats.tx_heartbeat_errors++; - if (cmd->status & 0x0400) - dev->stats.tx_carrier_errors++; - if (cmd->status & 0x0800) - dev->stats.collisions++; - if (cmd->status & 0x1000) - dev->stats.tx_aborted_errors++; - } - dev_kfree_skb_irq(tx_cmd_tbd->skb); - - cmd->pa_next = I596_NULL; - kfree((unsigned char *)tx_cmd); - netif_wake_queue(dev); - break; - } - - case CmdMulticastList: - cmd->pa_next = I596_NULL; - kfree((unsigned char *)cmd); - break; - - case CmdTDR: - { - unsigned long status = *((unsigned long *) (cmd + 1)); - if (status & 0x8000) { - if (i596_debug) - printk("%s: link ok.\n", dev->name); - } else { - if (status & 0x4000) - printk("%s: Transceiver problem.\n", - dev->name); - if (status & 0x2000) - printk("%s: Termination problem.\n", - dev->name); - if (status & 0x1000) - printk("%s: Short circuit.\n", - dev->name); - printk("%s: Time %ld.\n", - dev->name, status & 0x07ff); - } - } - default: - cmd->pa_next = I596_NULL; - lp->last_cmd = jiffies; - - } - barrier(); - } - - cmd = lp->cmd_head; - while (cmd && (cmd != lp->cmd_tail)) { - cmd->command &= 0x1fff; - cmd = pa_to_va(cmd->pa_next); - barrier(); - } - - if (lp->cmd_head) - *ack_cmdp |= CUC_START; - lp->scb.pa_cmd = va_to_pa(lp->cmd_head); - spin_unlock_irqrestore(&lp->cmd_lock, flags); -} - -static irqreturn_t -i596_interrupt(int irq, void *dev_instance) -{ - struct net_device *dev = dev_instance; - struct i596_private *lp = netdev_priv(dev); - unsigned short status, ack_cmd = 0; - int frames_in = 0; - - /* - * The 82596 examines the command, performs the required action, - * and then clears the SCB command word. - */ - if (lp->scb.command && i596_timeout(dev, "interrupt", 40)) - ; - - /* - * The status word indicates the status of the 82596. - * It is modified only by the 82596. - * - * [So, we must not clear it. I find often status 0xffff, - * which is not one of the values allowed by the docs.] - */ - status = lp->scb.status; -#if 0 - if (i596_debug) { - printk("%s: i596 interrupt, ", dev->name); - i596_out_status(status); - } -#endif - /* Impossible, but it happens - perhaps when we get - a receive interrupt but scb.pa_rfd is I596_NULL. */ - if (status == 0xffff) { - printk("%s: i596_interrupt: got status 0xffff\n", dev->name); - goto out; - } - - ack_cmd = (status & STAT_ACK); - - if (status & (STAT_CX | STAT_CNA)) - i596_handle_CU_completion(dev, lp, status, &ack_cmd); - - if (status & (STAT_FR | STAT_RNR)) { - /* Restart the receive unit when it got inactive somehow */ - if ((status & STAT_RNR) && netif_running(dev)) - ack_cmd |= RX_START; - - if (status & STAT_FR) { - frames_in = i596_rx(dev); - if (!frames_in) - printk("receive frame reported, but no frames\n"); - } - } - - /* acknowledge the interrupt */ - /* - if ((lp->scb.pa_cmd != I596_NULL) && netif_running(dev)) - ack_cmd |= CUC_START; - */ - - if (lp->scb.command && i596_timeout(dev, "i596 interrupt", 100)) - ; - - lp->scb.command = ack_cmd; - - CLEAR_INT(); - CA(); - - out: - return IRQ_HANDLED; -} - -static int i596_close(struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - - netif_stop_queue(dev); - - if (i596_debug) - printk("%s: Shutting down ethercard, status was %4.4x.\n", - dev->name, lp->scb.status); - - lp->scb.command = (CUC_ABORT | RX_ABORT); - CA(); - - i596_cleanup_cmd(dev); - - if (lp->scb.command && i596_timeout(dev, "i596_close", 200)) - ; - - free_irq(dev->irq, dev); - remove_rx_bufs(dev); - - return 0; -} - -/* -* Set or clear the multicast filter for this adaptor. -*/ - -static void set_multicast_list(struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - struct i596_cmd *cmd; - - if (i596_debug > 1) - printk ("%s: set multicast list %d\n", - dev->name, netdev_mc_count(dev)); - - if (!netdev_mc_empty(dev)) { - struct netdev_hw_addr *ha; - char *cp; - cmd = kmalloc(sizeof(struct i596_cmd) + 2 + - netdev_mc_count(dev) * 6, GFP_ATOMIC); - if (cmd == NULL) { - printk (KERN_ERR "%s: set_multicast Memory squeeze.\n", dev->name); - return; - } - cmd->command = CmdMulticastList; - *((unsigned short *) (cmd + 1)) = netdev_mc_count(dev) * 6; - cp = ((char *)(cmd + 1))+2; - netdev_for_each_mc_addr(ha, dev) { - memcpy(cp, ha->addr, 6); - cp += 6; - } - if (i596_debug & LOG_SRCDST) - print_eth (((char *)(cmd + 1)) + 2); - i596_add_cmd(dev, cmd); - } else { - if (lp->set_conf.pa_next != I596_NULL) { - return; - } - if (netdev_mc_empty(dev) && - !(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) { - lp->i596_config[8] &= ~0x01; - } else { - lp->i596_config[8] |= 0x01; - } - - i596_add_cmd(dev, &lp->set_conf); - } -} - -MODULE_AUTHOR("Ard van Breemen <ard@cstmel.nl.eu.org>"); -MODULE_DESCRIPTION("Intel Panther onboard i82596 driver"); -MODULE_LICENSE("GPL"); - -static struct net_device *dev_lp486e; -static int full_duplex; -static int options; -static int io = IOADDR; -static int irq = IRQ; - -module_param(debug, int, 0); -//module_param(max_interrupt_work, int, 0); -//module_param(reverse_probe, int, 0); -//module_param(rx_copybreak, int, 0); -module_param(options, int, 0); -module_param(full_duplex, int, 0); - -static int __init lp486e_init_module(void) { - int err; - struct net_device *dev = alloc_etherdev(sizeof(struct i596_private)); - if (!dev) - return -ENOMEM; - - dev->irq = irq; - dev->base_addr = io; - err = lp486e_probe(dev); - if (err) { - free_netdev(dev); - return err; - } - err = register_netdev(dev); - if (err) { - release_region(dev->base_addr, LP486E_TOTAL_SIZE); - free_netdev(dev); - return err; - } - dev_lp486e = dev; - full_duplex = 0; - options = 0; - return 0; -} - -static void __exit lp486e_cleanup_module(void) { - unregister_netdev(dev_lp486e); - release_region(dev_lp486e->base_addr, LP486E_TOTAL_SIZE); - free_netdev(dev_lp486e); -} - -module_init(lp486e_init_module); -module_exit(lp486e_cleanup_module); diff --git a/drivers/net/ethernet/i825xx/ni52.c b/drivers/net/ethernet/i825xx/ni52.c deleted file mode 100644 index 272976e..0000000 --- a/drivers/net/ethernet/i825xx/ni52.c +++ /dev/null @@ -1,1346 +0,0 @@ -/* - * net-3-driver for the NI5210 card (i82586 Ethernet chip) - * - * This is an extension to the Linux operating system, and is covered by the - * same GNU General Public License that covers that work. - * - * Alphacode 0.82 (96/09/29) for Linux 2.0.0 (or later) - * Copyrights (c) 1994,1995,1996 by M.Hipp (hippm@informatik.uni-tuebingen.de) - * [feel free to mail ....] - * - * when using as module: (no autoprobing!) - * run with e.g: - * insmod ni52.o io=0x360 irq=9 memstart=0xd0000 memend=0xd4000 - * - * CAN YOU PLEASE REPORT ME YOUR PERFORMANCE EXPERIENCES !!. - * - * If you find a bug, please report me: - * The kernel panic output and any kmsg from the ni52 driver - * the ni5210-driver-version and the linux-kernel version - * how many shared memory (memsize) on the netcard, - * bootprom: yes/no, base_addr, mem_start - * maybe the ni5210-card revision and the i82586 version - * - * autoprobe for: base_addr: 0x300,0x280,0x360,0x320,0x340 - * mem_start: 0xd0000,0xd2000,0xc8000,0xca000,0xd4000,0xd6000, - * 0xd8000,0xcc000,0xce000,0xda000,0xdc000 - * - * sources: - * skeleton.c from Donald Becker - * - * I have also done a look in the following sources: (mail me if you need them) - * crynwr-packet-driver by Russ Nelson - * Garret A. Wollman's (fourth) i82586-driver for BSD - * (before getting an i82596 (yes 596 not 586) manual, the existing drivers - * helped me a lot to understand this tricky chip.) - * - * Known Problems: - * The internal sysbus seems to be slow. So we often lose packets because of - * overruns while receiving from a fast remote host. - * This can slow down TCP connections. Maybe the newer ni5210 cards are - * better. My experience is, that if a machine sends with more than about - * 500-600K/s the fifo/sysbus overflows. - * - * IMPORTANT NOTE: - * On fast networks, it's a (very) good idea to have 16K shared memory. With - * 8K, we can store only 4 receive frames, so it can (easily) happen that a - * remote machine 'overruns' our system. - * - * Known i82586/card problems (I'm sure, there are many more!): - * Running the NOP-mode, the i82586 sometimes seems to forget to report - * every xmit-interrupt until we restart the CU. - * Another MAJOR bug is, that the RU sometimes seems to ignore the EL-Bit - * in the RBD-Struct which indicates an end of the RBD queue. - * Instead, the RU fetches another (randomly selected and - * usually used) RBD and begins to fill it. (Maybe, this happens only if - * the last buffer from the previous RFD fits exact into the queue and - * the next RFD can't fetch an initial RBD. Anyone knows more? ) - * - * results from ftp performance tests with Linux 1.2.5 - * send and receive about 350-400 KByte/s (peak up to 460 kbytes/s) - * sending in NOP-mode: peak performance up to 530K/s (but better don't - * run this mode) - */ - -/* - * 29.Sept.96: virt_to_bus changes for new memory scheme - * 19.Feb.96: more Mcast changes, module support (MH) - * - * 18.Nov.95: Mcast changes (AC). - * - * 23.April.95: fixed(?) receiving problems by configuring a RFD more - * than the number of RBD's. Can maybe cause other problems. - * 18.April.95: Added MODULE support (MH) - * 17.April.95: MC related changes in init586() and set_multicast_list(). - * removed use of 'jiffies' in init586() (MH) - * - * 19.Sep.94: Added Multicast support (not tested yet) (MH) - * - * 18.Sep.94: Workaround for 'EL-Bug'. Removed flexible RBD-handling. - * Now, every RFD has exact one RBD. (MH) - * - * 14.Sep.94: added promiscuous mode, a few cleanups (MH) - * - * 19.Aug.94: changed request_irq() parameter (MH) - * - * 20.July.94: removed cleanup bugs, removed a 16K-mem-probe-bug (MH) - * - * 19.July.94: lotsa cleanups .. (MH) - * - * 17.July.94: some patches ... verified to run with 1.1.29 (MH) - * - * 4.July.94: patches for Linux 1.1.24 (MH) - * - * 26.March.94: patches for Linux 1.0 and iomem-auto-probe (MH) - * - * 30.Sep.93: Added nop-chain .. driver now runs with only one Xmit-Buff, - * too (MH) - * - * < 30.Sep.93: first versions - */ - -static int debuglevel; /* debug-printk 0: off 1: a few 2: more */ -static int automatic_resume; /* experimental .. better should be zero */ -static int rfdadd; /* rfdadd=1 may be better for 8K MEM cards */ -static int fifo = 0x8; /* don't change */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/bitops.h> -#include <asm/io.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> - -#include "ni52.h" - -#define DRV_NAME "ni52" - -#define DEBUG /* debug on */ -#define SYSBUSVAL 1 /* 8 Bit */ - -#define ni_attn586() { outb(0, dev->base_addr + NI52_ATTENTION); } -#define ni_reset586() { outb(0, dev->base_addr + NI52_RESET); } -#define ni_disint() { outb(0, dev->base_addr + NI52_INTDIS); } -#define ni_enaint() { outb(0, dev->base_addr + NI52_INTENA); } - -#define make32(ptr16) ((void __iomem *)(p->memtop + (short) (ptr16))) -#define make24(ptr32) ((char __iomem *)(ptr32)) - p->base -#define make16(ptr32) ((unsigned short) ((char __iomem *)(ptr32)\ - - p->memtop)) - -/******************* how to calculate the buffers ***************************** - - * IMPORTANT NOTE: if you configure only one NUM_XMIT_BUFFS, the driver works - * --------------- in a different (more stable?) mode. Only in this mode it's - * possible to configure the driver with 'NO_NOPCOMMANDS' - -sizeof(scp)=12; sizeof(scb)=16; sizeof(iscp)=8; -sizeof(scp)+sizeof(iscp)+sizeof(scb) = 36 = INIT -sizeof(rfd) = 24; sizeof(rbd) = 12; -sizeof(tbd) = 8; sizeof(transmit_cmd) = 16; -sizeof(nop_cmd) = 8; - - * if you don't know the driver, better do not change these values: */ - -#define RECV_BUFF_SIZE 1524 /* slightly oversized */ -#define XMIT_BUFF_SIZE 1524 /* slightly oversized */ -#define NUM_XMIT_BUFFS 1 /* config for both, 8K and 16K shmem */ -#define NUM_RECV_BUFFS_8 4 /* config for 8K shared mem */ -#define NUM_RECV_BUFFS_16 9 /* config for 16K shared mem */ -#define NO_NOPCOMMANDS /* only possible with NUM_XMIT_BUFFS=1 */ - -/**************************************************************************/ - - -#define NI52_TOTAL_SIZE 16 -#define NI52_ADDR0 0x02 -#define NI52_ADDR1 0x07 -#define NI52_ADDR2 0x01 - -static int ni52_probe1(struct net_device *dev, int ioaddr); -static irqreturn_t ni52_interrupt(int irq, void *dev_id); -static int ni52_open(struct net_device *dev); -static int ni52_close(struct net_device *dev); -static netdev_tx_t ni52_send_packet(struct sk_buff *, struct net_device *); -static struct net_device_stats *ni52_get_stats(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); -static void ni52_timeout(struct net_device *dev); - -/* helper-functions */ -static int init586(struct net_device *dev); -static int check586(struct net_device *dev, unsigned size); -static void alloc586(struct net_device *dev); -static void startrecv586(struct net_device *dev); -static void __iomem *alloc_rfa(struct net_device *dev, void __iomem *ptr); -static void ni52_rcv_int(struct net_device *dev); -static void ni52_xmt_int(struct net_device *dev); -static void ni52_rnr_int(struct net_device *dev); - -struct priv { - char __iomem *base; - char __iomem *mapped; - char __iomem *memtop; - spinlock_t spinlock; - int reset; - struct rfd_struct __iomem *rfd_last, *rfd_top, *rfd_first; - struct scp_struct __iomem *scp; - struct iscp_struct __iomem *iscp; - struct scb_struct __iomem *scb; - struct tbd_struct __iomem *xmit_buffs[NUM_XMIT_BUFFS]; -#if (NUM_XMIT_BUFFS == 1) - struct transmit_cmd_struct __iomem *xmit_cmds[2]; - struct nop_cmd_struct __iomem *nop_cmds[2]; -#else - struct transmit_cmd_struct __iomem *xmit_cmds[NUM_XMIT_BUFFS]; - struct nop_cmd_struct __iomem *nop_cmds[NUM_XMIT_BUFFS]; -#endif - int nop_point, num_recv_buffs; - char __iomem *xmit_cbuffs[NUM_XMIT_BUFFS]; - int xmit_count, xmit_last; -}; - -/* wait for command with timeout: */ -static void wait_for_scb_cmd(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - int i; - for (i = 0; i < 16384; i++) { - if (readb(&p->scb->cmd_cuc) == 0) - break; - udelay(4); - if (i == 16383) { - printk(KERN_ERR "%s: scb_cmd timed out: %04x,%04x .. disabling i82586!!\n", - dev->name, readb(&p->scb->cmd_cuc), readb(&p->scb->cus)); - if (!p->reset) { - p->reset = 1; - ni_reset586(); - } - } - } -} - -static void wait_for_scb_cmd_ruc(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - int i; - for (i = 0; i < 16384; i++) { - if (readb(&p->scb->cmd_ruc) == 0) - break; - udelay(4); - if (i == 16383) { - printk(KERN_ERR "%s: scb_cmd (ruc) timed out: %04x,%04x .. disabling i82586!!\n", - dev->name, readb(&p->scb->cmd_ruc), - readb(&p->scb->rus)); - if (!p->reset) { - p->reset = 1; - ni_reset586(); - } - } - } -} - -static void wait_for_stat_compl(void __iomem *p) -{ - struct nop_cmd_struct __iomem *addr = p; - int i; - for (i = 0; i < 32767; i++) { - if (readw(&((addr)->cmd_status)) & STAT_COMPL) - break; - udelay(32); - } -} - -/********************************************** - * close device - */ -static int ni52_close(struct net_device *dev) -{ - free_irq(dev->irq, dev); - ni_reset586(); /* the hard way to stop the receiver */ - netif_stop_queue(dev); - return 0; -} - -/********************************************** - * open device - */ -static int ni52_open(struct net_device *dev) -{ - int ret; - - ni_disint(); - alloc586(dev); - init586(dev); - startrecv586(dev); - ni_enaint(); - - ret = request_irq(dev->irq, ni52_interrupt, 0, dev->name, dev); - if (ret) { - ni_reset586(); - return ret; - } - netif_start_queue(dev); - return 0; /* most done by init */ -} - -static int check_iscp(struct net_device *dev, void __iomem *addr) -{ - struct iscp_struct __iomem *iscp = addr; - struct priv *p = netdev_priv(dev); - memset_io(iscp, 0, sizeof(struct iscp_struct)); - - writel(make24(iscp), &p->scp->iscp); - writeb(1, &iscp->busy); - - ni_reset586(); - ni_attn586(); - mdelay(32); /* wait a while... */ - /* i82586 clears 'busy' after successful init */ - if (readb(&iscp->busy)) - return 0; - return 1; -} - -/********************************************** - * Check to see if there's an 82586 out there. - */ -static int check586(struct net_device *dev, unsigned size) -{ - struct priv *p = netdev_priv(dev); - int i; - - p->mapped = ioremap(dev->mem_start, size); - if (!p->mapped) - return 0; - - p->base = p->mapped + size - 0x01000000; - p->memtop = p->mapped + size; - p->scp = (struct scp_struct __iomem *)(p->base + SCP_DEFAULT_ADDRESS); - p->scb = (struct scb_struct __iomem *) p->mapped; - p->iscp = (struct iscp_struct __iomem *)p->scp - 1; - memset_io(p->scp, 0, sizeof(struct scp_struct)); - for (i = 0; i < sizeof(struct scp_struct); i++) - /* memory was writeable? */ - if (readb((char __iomem *)p->scp + i)) - goto Enodev; - writeb(SYSBUSVAL, &p->scp->sysbus); /* 1 = 8Bit-Bus, 0 = 16 Bit */ - if (readb(&p->scp->sysbus) != SYSBUSVAL) - goto Enodev; - - if (!check_iscp(dev, p->mapped)) - goto Enodev; - if (!check_iscp(dev, p->iscp)) - goto Enodev; - return 1; -Enodev: - iounmap(p->mapped); - return 0; -} - -/****************************************************************** - * set iscp at the right place, called by ni52_probe1 and open586. - */ -static void alloc586(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - - ni_reset586(); - mdelay(32); - - memset_io(p->iscp, 0, sizeof(struct iscp_struct)); - memset_io(p->scp , 0, sizeof(struct scp_struct)); - - writel(make24(p->iscp), &p->scp->iscp); - writeb(SYSBUSVAL, &p->scp->sysbus); - writew(make16(p->scb), &p->iscp->scb_offset); - - writeb(1, &p->iscp->busy); - ni_reset586(); - ni_attn586(); - - mdelay(32); - - if (readb(&p->iscp->busy)) - printk(KERN_ERR "%s: Init-Problems (alloc).\n", dev->name); - - p->reset = 0; - - memset_io(p->scb, 0, sizeof(struct scb_struct)); -} - -/* set: io,irq,memstart,memend or set it when calling insmod */ -static int irq = 9; -static int io = 0x300; -static long memstart; /* e.g 0xd0000 */ -static long memend; /* e.g 0xd4000 */ - -/********************************************** - * probe the ni5210-card - */ -struct net_device * __init ni52_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct priv)); - static const int ports[] = {0x300, 0x280, 0x360, 0x320, 0x340, 0}; - const int *port; - struct priv *p; - int err = 0; - - if (!dev) - return ERR_PTR(-ENOMEM); - - p = netdev_priv(dev); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - memstart = dev->mem_start; - memend = dev->mem_end; - } - - if (io > 0x1ff) { /* Check a single specified location. */ - err = ni52_probe1(dev, io); - } else if (io > 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { - for (port = ports; *port && ni52_probe1(dev, *port) ; port++) - ; - if (*port) - goto got_it; -#ifdef FULL_IO_PROBE - for (io = 0x200; io < 0x400 && ni52_probe1(dev, io); io += 8) - ; - if (io < 0x400) - goto got_it; -#endif - err = -ENODEV; - } - if (err) - goto out; -got_it: - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - iounmap(p->mapped); - release_region(dev->base_addr, NI52_TOTAL_SIZE); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static const struct net_device_ops ni52_netdev_ops = { - .ndo_open = ni52_open, - .ndo_stop = ni52_close, - .ndo_get_stats = ni52_get_stats, - .ndo_tx_timeout = ni52_timeout, - .ndo_start_xmit = ni52_send_packet, - .ndo_set_rx_mode = set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init ni52_probe1(struct net_device *dev, int ioaddr) -{ - int i, size, retval; - struct priv *priv = netdev_priv(dev); - - dev->base_addr = ioaddr; - dev->irq = irq; - dev->mem_start = memstart; - dev->mem_end = memend; - - spin_lock_init(&priv->spinlock); - - if (!request_region(ioaddr, NI52_TOTAL_SIZE, DRV_NAME)) - return -EBUSY; - - if (!(inb(ioaddr+NI52_MAGIC1) == NI52_MAGICVAL1) || - !(inb(ioaddr+NI52_MAGIC2) == NI52_MAGICVAL2)) { - retval = -ENODEV; - goto out; - } - - for (i = 0; i < ETH_ALEN; i++) - dev->dev_addr[i] = inb(dev->base_addr+i); - - if (dev->dev_addr[0] != NI52_ADDR0 || dev->dev_addr[1] != NI52_ADDR1 || - dev->dev_addr[2] != NI52_ADDR2) { - retval = -ENODEV; - goto out; - } - - printk(KERN_INFO "%s: NI5210 found at %#3lx, ", - dev->name, dev->base_addr); - - /* - * check (or search) IO-Memory, 8K and 16K - */ -#ifdef MODULE - size = dev->mem_end - dev->mem_start; - if (size != 0x2000 && size != 0x4000) { - printk("\n"); - printk(KERN_ERR "%s: Invalid memory size %d. Allowed is 0x2000 or 0x4000 bytes.\n", dev->name, size); - retval = -ENODEV; - goto out; - } - if (!check586(dev, size)) { - printk(KERN_ERR "?memcheck, Can't find memory at 0x%lx with size %d!\n", dev->mem_start, size); - retval = -ENODEV; - goto out; - } -#else - if (dev->mem_start != 0) { - /* no auto-mem-probe */ - size = 0x4000; /* check for 16K mem */ - if (!check586(dev, size)) { - size = 0x2000; /* check for 8K mem */ - if (!check586(dev, size)) { - printk(KERN_ERR "?memprobe, Can't find memory at 0x%lx!\n", dev->mem_start); - retval = -ENODEV; - goto out; - } - } - } else { - static const unsigned long memaddrs[] = { - 0xc8000, 0xca000, 0xcc000, 0xce000, 0xd0000, 0xd2000, - 0xd4000, 0xd6000, 0xd8000, 0xda000, 0xdc000, 0 - }; - for (i = 0;; i++) { - if (!memaddrs[i]) { - printk(KERN_ERR "?memprobe, Can't find io-memory!\n"); - retval = -ENODEV; - goto out; - } - dev->mem_start = memaddrs[i]; - size = 0x2000; /* check for 8K mem */ - if (check586(dev, size)) - /* 8K-check */ - break; - size = 0x4000; /* check for 16K mem */ - if (check586(dev, size)) - /* 16K-check */ - break; - } - } - /* set mem_end showed by 'ifconfig' */ - dev->mem_end = dev->mem_start + size; -#endif - - alloc586(dev); - - /* set number of receive-buffs according to memsize */ - if (size == 0x2000) - priv->num_recv_buffs = NUM_RECV_BUFFS_8; - else - priv->num_recv_buffs = NUM_RECV_BUFFS_16; - - printk(KERN_DEBUG "Memaddr: 0x%lx, Memsize: %d, ", - dev->mem_start, size); - - if (dev->irq < 2) { - unsigned long irq_mask; - - irq_mask = probe_irq_on(); - ni_reset586(); - ni_attn586(); - - mdelay(20); - dev->irq = probe_irq_off(irq_mask); - if (!dev->irq) { - printk("?autoirq, Failed to detect IRQ line!\n"); - retval = -EAGAIN; - iounmap(priv->mapped); - goto out; - } - printk("IRQ %d (autodetected).\n", dev->irq); - } else { - if (dev->irq == 2) - dev->irq = 9; - printk("IRQ %d (assigned and not checked!).\n", dev->irq); - } - - dev->netdev_ops = &ni52_netdev_ops; - dev->watchdog_timeo = HZ/20; - - return 0; -out: - release_region(ioaddr, NI52_TOTAL_SIZE); - return retval; -} - -/********************************************** - * init the chip (ni52-interrupt should be disabled?!) - * needs a correct 'allocated' memory - */ - -static int init586(struct net_device *dev) -{ - void __iomem *ptr; - int i, result = 0; - struct priv *p = netdev_priv(dev); - struct configure_cmd_struct __iomem *cfg_cmd; - struct iasetup_cmd_struct __iomem *ias_cmd; - struct tdr_cmd_struct __iomem *tdr_cmd; - struct mcsetup_cmd_struct __iomem *mc_cmd; - struct netdev_hw_addr *ha; - int num_addrs = netdev_mc_count(dev); - - ptr = p->scb + 1; - - cfg_cmd = ptr; /* configure-command */ - writew(0, &cfg_cmd->cmd_status); - writew(CMD_CONFIGURE | CMD_LAST, &cfg_cmd->cmd_cmd); - writew(0xFFFF, &cfg_cmd->cmd_link); - - /* number of cfg bytes */ - writeb(0x0a, &cfg_cmd->byte_cnt); - /* fifo-limit (8=tx:32/rx:64) */ - writeb(fifo, &cfg_cmd->fifo); - /* hold or discard bad recv frames (bit 7) */ - writeb(0x40, &cfg_cmd->sav_bf); - /* addr_len |!src_insert |pre-len |loopback */ - writeb(0x2e, &cfg_cmd->adr_len); - writeb(0x00, &cfg_cmd->priority); - writeb(0x60, &cfg_cmd->ifs); - writeb(0x00, &cfg_cmd->time_low); - writeb(0xf2, &cfg_cmd->time_high); - writeb(0x00, &cfg_cmd->promisc); - if (dev->flags & IFF_ALLMULTI) { - int len = ((char __iomem *)p->iscp - (char __iomem *)ptr - 8) / 6; - if (num_addrs > len) { - printk(KERN_ERR "%s: switching to promisc. mode\n", - dev->name); - writeb(0x01, &cfg_cmd->promisc); - } - } - if (dev->flags & IFF_PROMISC) - writeb(0x01, &cfg_cmd->promisc); - writeb(0x00, &cfg_cmd->carr_coll); - writew(make16(cfg_cmd), &p->scb->cbl_offset); - writeb(0, &p->scb->cmd_ruc); - - writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */ - ni_attn586(); - - wait_for_stat_compl(cfg_cmd); - - if ((readw(&cfg_cmd->cmd_status) & (STAT_OK|STAT_COMPL)) != - (STAT_COMPL|STAT_OK)) { - printk(KERN_ERR "%s: configure command failed: %x\n", - dev->name, readw(&cfg_cmd->cmd_status)); - return 1; - } - - /* - * individual address setup - */ - - ias_cmd = ptr; - - writew(0, &ias_cmd->cmd_status); - writew(CMD_IASETUP | CMD_LAST, &ias_cmd->cmd_cmd); - writew(0xffff, &ias_cmd->cmd_link); - - memcpy_toio(&ias_cmd->iaddr, (char *)dev->dev_addr, ETH_ALEN); - - writew(make16(ias_cmd), &p->scb->cbl_offset); - - writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */ - ni_attn586(); - - wait_for_stat_compl(ias_cmd); - - if ((readw(&ias_cmd->cmd_status) & (STAT_OK|STAT_COMPL)) != - (STAT_OK|STAT_COMPL)) { - printk(KERN_ERR "%s (ni52): individual address setup command failed: %04x\n", dev->name, readw(&ias_cmd->cmd_status)); - return 1; - } - - /* - * TDR, wire check .. e.g. no resistor e.t.c - */ - - tdr_cmd = ptr; - - writew(0, &tdr_cmd->cmd_status); - writew(CMD_TDR | CMD_LAST, &tdr_cmd->cmd_cmd); - writew(0xffff, &tdr_cmd->cmd_link); - writew(0, &tdr_cmd->status); - - writew(make16(tdr_cmd), &p->scb->cbl_offset); - writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */ - ni_attn586(); - - wait_for_stat_compl(tdr_cmd); - - if (!(readw(&tdr_cmd->cmd_status) & STAT_COMPL)) - printk(KERN_ERR "%s: Problems while running the TDR.\n", - dev->name); - else { - udelay(16); - result = readw(&tdr_cmd->status); - writeb(readb(&p->scb->cus) & STAT_MASK, &p->scb->cmd_cuc); - ni_attn586(); /* ack the interrupts */ - - if (result & TDR_LNK_OK) - ; - else if (result & TDR_XCVR_PRB) - printk(KERN_ERR "%s: TDR: Transceiver problem. Check the cable(s)!\n", - dev->name); - else if (result & TDR_ET_OPN) - printk(KERN_ERR "%s: TDR: No correct termination %d clocks away.\n", - dev->name, result & TDR_TIMEMASK); - else if (result & TDR_ET_SRT) { - /* time == 0 -> strange :-) */ - if (result & TDR_TIMEMASK) - printk(KERN_ERR "%s: TDR: Detected a short circuit %d clocks away.\n", - dev->name, result & TDR_TIMEMASK); - } else - printk(KERN_ERR "%s: TDR: Unknown status %04x\n", - dev->name, result); - } - - /* - * Multicast setup - */ - if (num_addrs && !(dev->flags & IFF_PROMISC)) { - mc_cmd = ptr; - writew(0, &mc_cmd->cmd_status); - writew(CMD_MCSETUP | CMD_LAST, &mc_cmd->cmd_cmd); - writew(0xffff, &mc_cmd->cmd_link); - writew(num_addrs * 6, &mc_cmd->mc_cnt); - - i = 0; - netdev_for_each_mc_addr(ha, dev) - memcpy_toio(mc_cmd->mc_list[i++], ha->addr, 6); - - writew(make16(mc_cmd), &p->scb->cbl_offset); - writeb(CUC_START, &p->scb->cmd_cuc); - ni_attn586(); - - wait_for_stat_compl(mc_cmd); - - if ((readw(&mc_cmd->cmd_status) & (STAT_COMPL|STAT_OK)) - != (STAT_COMPL|STAT_OK)) - printk(KERN_ERR "%s: Can't apply multicast-address-list.\n", dev->name); - } - - /* - * alloc nop/xmit-cmds - */ -#if (NUM_XMIT_BUFFS == 1) - for (i = 0; i < 2; i++) { - p->nop_cmds[i] = ptr; - writew(CMD_NOP, &p->nop_cmds[i]->cmd_cmd); - writew(0, &p->nop_cmds[i]->cmd_status); - writew(make16(p->nop_cmds[i]), &p->nop_cmds[i]->cmd_link); - ptr = ptr + sizeof(struct nop_cmd_struct); - } -#else - for (i = 0; i < NUM_XMIT_BUFFS; i++) { - p->nop_cmds[i] = ptr; - writew(CMD_NOP, &p->nop_cmds[i]->cmd_cmd); - writew(0, &p->nop_cmds[i]->cmd_status); - writew(make16(p->nop_cmds[i]), &p->nop_cmds[i]->cmd_link); - ptr = ptr + sizeof(struct nop_cmd_struct); - } -#endif - - ptr = alloc_rfa(dev, ptr); /* init receive-frame-area */ - - /* - * alloc xmit-buffs / init xmit_cmds - */ - for (i = 0; i < NUM_XMIT_BUFFS; i++) { - /* Transmit cmd/buff 0 */ - p->xmit_cmds[i] = ptr; - ptr = ptr + sizeof(struct transmit_cmd_struct); - p->xmit_cbuffs[i] = ptr; /* char-buffs */ - ptr = ptr + XMIT_BUFF_SIZE; - p->xmit_buffs[i] = ptr; /* TBD */ - ptr = ptr + sizeof(struct tbd_struct); - if ((void __iomem *)ptr > (void __iomem *)p->iscp) { - printk(KERN_ERR "%s: not enough shared-mem for your configuration!\n", - dev->name); - return 1; - } - memset_io(p->xmit_cmds[i], 0, - sizeof(struct transmit_cmd_struct)); - memset_io(p->xmit_buffs[i], 0, - sizeof(struct tbd_struct)); - writew(make16(p->nop_cmds[(i+1)%NUM_XMIT_BUFFS]), - &p->xmit_cmds[i]->cmd_link); - writew(STAT_COMPL, &p->xmit_cmds[i]->cmd_status); - writew(CMD_XMIT|CMD_INT, &p->xmit_cmds[i]->cmd_cmd); - writew(make16(p->xmit_buffs[i]), &p->xmit_cmds[i]->tbd_offset); - writew(0xffff, &p->xmit_buffs[i]->next); - writel(make24(p->xmit_cbuffs[i]), &p->xmit_buffs[i]->buffer); - } - - p->xmit_count = 0; - p->xmit_last = 0; -#ifndef NO_NOPCOMMANDS - p->nop_point = 0; -#endif - - /* - * 'start transmitter' - */ -#ifndef NO_NOPCOMMANDS - writew(make16(p->nop_cmds[0]), &p->scb->cbl_offset); - writeb(CUC_START, &p->scb->cmd_cuc); - ni_attn586(); - wait_for_scb_cmd(dev); -#else - writew(make16(p->xmit_cmds[0]), &p->xmit_cmds[0]->cmd_link); - writew(CMD_XMIT | CMD_SUSPEND | CMD_INT, &p->xmit_cmds[0]->cmd_cmd); -#endif - - /* - * ack. interrupts - */ - writeb(readb(&p->scb->cus) & STAT_MASK, &p->scb->cmd_cuc); - ni_attn586(); - udelay(16); - - ni_enaint(); - - return 0; -} - -/****************************************************** - * This is a helper routine for ni52_rnr_int() and init586(). - * It sets up the Receive Frame Area (RFA). - */ - -static void __iomem *alloc_rfa(struct net_device *dev, void __iomem *ptr) -{ - struct rfd_struct __iomem *rfd = ptr; - struct rbd_struct __iomem *rbd; - int i; - struct priv *p = netdev_priv(dev); - - memset_io(rfd, 0, - sizeof(struct rfd_struct) * (p->num_recv_buffs + rfdadd)); - p->rfd_first = rfd; - - for (i = 0; i < (p->num_recv_buffs + rfdadd); i++) { - writew(make16(rfd + (i+1) % (p->num_recv_buffs+rfdadd)), - &rfd[i].next); - writew(0xffff, &rfd[i].rbd_offset); - } - /* RU suspend */ - writeb(RFD_SUSP, &rfd[p->num_recv_buffs-1+rfdadd].last); - - ptr = rfd + (p->num_recv_buffs + rfdadd); - - rbd = ptr; - ptr = rbd + p->num_recv_buffs; - - /* clr descriptors */ - memset_io(rbd, 0, sizeof(struct rbd_struct) * (p->num_recv_buffs)); - - for (i = 0; i < p->num_recv_buffs; i++) { - writew(make16(rbd + (i+1) % p->num_recv_buffs), &rbd[i].next); - writew(RECV_BUFF_SIZE, &rbd[i].size); - writel(make24(ptr), &rbd[i].buffer); - ptr = ptr + RECV_BUFF_SIZE; - } - p->rfd_top = p->rfd_first; - p->rfd_last = p->rfd_first + (p->num_recv_buffs - 1 + rfdadd); - - writew(make16(p->rfd_first), &p->scb->rfa_offset); - writew(make16(rbd), &p->rfd_first->rbd_offset); - - return ptr; -} - - -/************************************************** - * Interrupt Handler ... - */ - -static irqreturn_t ni52_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - unsigned int stat; - int cnt = 0; - struct priv *p; - - p = netdev_priv(dev); - - if (debuglevel > 1) - printk("I"); - - spin_lock(&p->spinlock); - - wait_for_scb_cmd(dev); /* wait for last command */ - - while ((stat = readb(&p->scb->cus) & STAT_MASK)) { - writeb(stat, &p->scb->cmd_cuc); - ni_attn586(); - - if (stat & STAT_FR) /* received a frame */ - ni52_rcv_int(dev); - - if (stat & STAT_RNR) { /* RU went 'not ready' */ - printk("(R)"); - if (readb(&p->scb->rus) & RU_SUSPEND) { - /* special case: RU_SUSPEND */ - wait_for_scb_cmd(dev); - writeb(RUC_RESUME, &p->scb->cmd_ruc); - ni_attn586(); - wait_for_scb_cmd_ruc(dev); - } else { - printk(KERN_ERR "%s: Receiver-Unit went 'NOT READY': %04x/%02x.\n", - dev->name, stat, readb(&p->scb->rus)); - ni52_rnr_int(dev); - } - } - - /* Command with I-bit set complete */ - if (stat & STAT_CX) - ni52_xmt_int(dev); - -#ifndef NO_NOPCOMMANDS - if (stat & STAT_CNA) { /* CU went 'not ready' */ - if (netif_running(dev)) - printk(KERN_ERR "%s: oops! CU has left active state. stat: %04x/%02x.\n", - dev->name, stat, readb(&p->scb->cus)); - } -#endif - - if (debuglevel > 1) - printk("%d", cnt++); - - /* Wait for ack. (ni52_xmt_int can be faster than ack!!) */ - wait_for_scb_cmd(dev); - if (readb(&p->scb->cmd_cuc)) { /* timed out? */ - printk(KERN_ERR "%s: Acknowledge timed out.\n", - dev->name); - ni_disint(); - break; - } - } - spin_unlock(&p->spinlock); - - if (debuglevel > 1) - printk("i"); - return IRQ_HANDLED; -} - -/******************************************************* - * receive-interrupt - */ - -static void ni52_rcv_int(struct net_device *dev) -{ - int status, cnt = 0; - unsigned short totlen; - struct sk_buff *skb; - struct rbd_struct __iomem *rbd; - struct priv *p = netdev_priv(dev); - - if (debuglevel > 0) - printk("R"); - - for (; (status = readb(&p->rfd_top->stat_high)) & RFD_COMPL;) { - rbd = make32(readw(&p->rfd_top->rbd_offset)); - if (status & RFD_OK) { /* frame received without error? */ - totlen = readw(&rbd->status); - if (totlen & RBD_LAST) { - /* the first and the last buffer? */ - totlen &= RBD_MASK; /* length of this frame */ - writew(0x00, &rbd->status); - skb = netdev_alloc_skb(dev, totlen + 2); - if (skb != NULL) { - skb_reserve(skb, 2); - skb_put(skb, totlen); - memcpy_fromio(skb->data, p->base + readl(&rbd->buffer), totlen); - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += totlen; - } else - dev->stats.rx_dropped++; - } else { - int rstat; - /* free all RBD's until RBD_LAST is set */ - totlen = 0; - while (!((rstat = readw(&rbd->status)) & RBD_LAST)) { - totlen += rstat & RBD_MASK; - if (!rstat) { - printk(KERN_ERR "%s: Whoops .. no end mark in RBD list\n", dev->name); - break; - } - writew(0, &rbd->status); - rbd = make32(readw(&rbd->next)); - } - totlen += rstat & RBD_MASK; - writew(0, &rbd->status); - printk(KERN_ERR "%s: received oversized frame! length: %d\n", - dev->name, totlen); - dev->stats.rx_dropped++; - } - } else {/* frame !(ok), only with 'save-bad-frames' */ - printk(KERN_ERR "%s: oops! rfd-error-status: %04x\n", - dev->name, status); - dev->stats.rx_errors++; - } - writeb(0, &p->rfd_top->stat_high); - writeb(RFD_SUSP, &p->rfd_top->last); /* maybe exchange by RFD_LAST */ - writew(0xffff, &p->rfd_top->rbd_offset); - writeb(0, &p->rfd_last->last); /* delete RFD_SUSP */ - p->rfd_last = p->rfd_top; - p->rfd_top = make32(readw(&p->rfd_top->next)); /* step to next RFD */ - writew(make16(p->rfd_top), &p->scb->rfa_offset); - - if (debuglevel > 0) - printk("%d", cnt++); - } - - if (automatic_resume) { - wait_for_scb_cmd(dev); - writeb(RUC_RESUME, &p->scb->cmd_ruc); - ni_attn586(); - wait_for_scb_cmd_ruc(dev); - } - -#ifdef WAIT_4_BUSY - { - int i; - for (i = 0; i < 1024; i++) { - if (p->rfd_top->status) - break; - udelay(16); - if (i == 1023) - printk(KERN_ERR "%s: RU hasn't fetched next RFD (not busy/complete)\n", dev->name); - } - } -#endif - if (debuglevel > 0) - printk("r"); -} - -/********************************************************** - * handle 'Receiver went not ready'. - */ - -static void ni52_rnr_int(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - - dev->stats.rx_errors++; - - wait_for_scb_cmd(dev); /* wait for the last cmd, WAIT_4_FULLSTAT?? */ - writeb(RUC_ABORT, &p->scb->cmd_ruc); /* usually the RU is in the 'no resource'-state .. abort it now. */ - ni_attn586(); - wait_for_scb_cmd_ruc(dev); /* wait for accept cmd. */ - - alloc_rfa(dev, p->rfd_first); - /* maybe add a check here, before restarting the RU */ - startrecv586(dev); /* restart RU */ - - printk(KERN_ERR "%s: Receive-Unit restarted. Status: %04x\n", - dev->name, readb(&p->scb->rus)); - -} - -/********************************************************** - * handle xmit - interrupt - */ - -static void ni52_xmt_int(struct net_device *dev) -{ - int status; - struct priv *p = netdev_priv(dev); - - if (debuglevel > 0) - printk("X"); - - status = readw(&p->xmit_cmds[p->xmit_last]->cmd_status); - if (!(status & STAT_COMPL)) - printk(KERN_ERR "%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name); - - if (status & STAT_OK) { - dev->stats.tx_packets++; - dev->stats.collisions += (status & TCMD_MAXCOLLMASK); - } else { - dev->stats.tx_errors++; - if (status & TCMD_LATECOLL) { - printk(KERN_ERR "%s: late collision detected.\n", - dev->name); - dev->stats.collisions++; - } else if (status & TCMD_NOCARRIER) { - dev->stats.tx_carrier_errors++; - printk(KERN_ERR "%s: no carrier detected.\n", - dev->name); - } else if (status & TCMD_LOSTCTS) - printk(KERN_ERR "%s: loss of CTS detected.\n", - dev->name); - else if (status & TCMD_UNDERRUN) { - dev->stats.tx_fifo_errors++; - printk(KERN_ERR "%s: DMA underrun detected.\n", - dev->name); - } else if (status & TCMD_MAXCOLL) { - printk(KERN_ERR "%s: Max. collisions exceeded.\n", - dev->name); - dev->stats.collisions += 16; - } - } -#if (NUM_XMIT_BUFFS > 1) - if ((++p->xmit_last) == NUM_XMIT_BUFFS) - p->xmit_last = 0; -#endif - netif_wake_queue(dev); -} - -/*********************************************************** - * (re)start the receiver - */ - -static void startrecv586(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - - wait_for_scb_cmd(dev); - wait_for_scb_cmd_ruc(dev); - writew(make16(p->rfd_first), &p->scb->rfa_offset); - writeb(RUC_START, &p->scb->cmd_ruc); - ni_attn586(); /* start cmd. */ - wait_for_scb_cmd_ruc(dev); - /* wait for accept cmd. (no timeout!!) */ -} - -static void ni52_timeout(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); -#ifndef NO_NOPCOMMANDS - if (readb(&p->scb->cus) & CU_ACTIVE) { /* COMMAND-UNIT active? */ - netif_wake_queue(dev); -#ifdef DEBUG - printk(KERN_ERR "%s: strange ... timeout with CU active?!?\n", - dev->name); - printk(KERN_ERR "%s: X0: %04x N0: %04x N1: %04x %d\n", - dev->name, (int)p->xmit_cmds[0]->cmd_status, - readw(&p->nop_cmds[0]->cmd_status), - readw(&p->nop_cmds[1]->cmd_status), - p->nop_point); -#endif - writeb(CUC_ABORT, &p->scb->cmd_cuc); - ni_attn586(); - wait_for_scb_cmd(dev); - writew(make16(p->nop_cmds[p->nop_point]), &p->scb->cbl_offset); - writeb(CUC_START, &p->scb->cmd_cuc); - ni_attn586(); - wait_for_scb_cmd(dev); - dev->trans_start = jiffies; /* prevent tx timeout */ - return 0; - } -#endif - { -#ifdef DEBUG - printk(KERN_ERR "%s: xmitter timed out, try to restart! stat: %02x\n", - dev->name, readb(&p->scb->cus)); - printk(KERN_ERR "%s: command-stats: %04x %04x\n", - dev->name, - readw(&p->xmit_cmds[0]->cmd_status), - readw(&p->xmit_cmds[1]->cmd_status)); - printk(KERN_ERR "%s: check, whether you set the right interrupt number!\n", - dev->name); -#endif - ni52_close(dev); - ni52_open(dev); - } - dev->trans_start = jiffies; /* prevent tx timeout */ -} - -/****************************************************** - * send frame - */ - -static netdev_tx_t ni52_send_packet(struct sk_buff *skb, - struct net_device *dev) -{ - int len, i; -#ifndef NO_NOPCOMMANDS - int next_nop; -#endif - struct priv *p = netdev_priv(dev); - - if (skb->len > XMIT_BUFF_SIZE) { - printk(KERN_ERR "%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n", dev->name, XMIT_BUFF_SIZE, skb->len); - return NETDEV_TX_OK; - } - - netif_stop_queue(dev); - - memcpy_toio(p->xmit_cbuffs[p->xmit_count], skb->data, skb->len); - len = skb->len; - if (len < ETH_ZLEN) { - len = ETH_ZLEN; - memset_io(p->xmit_cbuffs[p->xmit_count]+skb->len, 0, - len - skb->len); - } - -#if (NUM_XMIT_BUFFS == 1) -# ifdef NO_NOPCOMMANDS - -#ifdef DEBUG - if (readb(&p->scb->cus) & CU_ACTIVE) { - printk(KERN_ERR "%s: Hmmm .. CU is still running and we wanna send a new packet.\n", dev->name); - printk(KERN_ERR "%s: stat: %04x %04x\n", - dev->name, readb(&p->scb->cus), - readw(&p->xmit_cmds[0]->cmd_status)); - } -#endif - writew(TBD_LAST | len, &p->xmit_buffs[0]->size); - for (i = 0; i < 16; i++) { - writew(0, &p->xmit_cmds[0]->cmd_status); - wait_for_scb_cmd(dev); - if ((readb(&p->scb->cus) & CU_STATUS) == CU_SUSPEND) - writeb(CUC_RESUME, &p->scb->cmd_cuc); - else { - writew(make16(p->xmit_cmds[0]), &p->scb->cbl_offset); - writeb(CUC_START, &p->scb->cmd_cuc); - } - ni_attn586(); - if (!i) - dev_kfree_skb(skb); - wait_for_scb_cmd(dev); - /* test it, because CU sometimes doesn't start immediately */ - if (readb(&p->scb->cus) & CU_ACTIVE) - break; - if (readw(&p->xmit_cmds[0]->cmd_status)) - break; - if (i == 15) - printk(KERN_WARNING "%s: Can't start transmit-command.\n", dev->name); - } -# else - next_nop = (p->nop_point + 1) & 0x1; - writew(TBD_LAST | len, &p->xmit_buffs[0]->size); - writew(make16(p->nop_cmds[next_nop]), &p->xmit_cmds[0]->cmd_link); - writew(make16(p->nop_cmds[next_nop]), - &p->nop_cmds[next_nop]->cmd_link); - writew(0, &p->xmit_cmds[0]->cmd_status); - writew(0, &p->nop_cmds[next_nop]->cmd_status); - - writew(make16(p->xmit_cmds[0]), &p->nop_cmds[p->nop_point]->cmd_link); - p->nop_point = next_nop; - dev_kfree_skb(skb); -# endif -#else - writew(TBD_LAST | len, &p->xmit_buffs[p->xmit_count]->size); - next_nop = p->xmit_count + 1 - if (next_nop == NUM_XMIT_BUFFS) - next_nop = 0; - writew(0, &p->xmit_cmds[p->xmit_count]->cmd_status); - /* linkpointer of xmit-command already points to next nop cmd */ - writew(make16(p->nop_cmds[next_nop]), - &p->nop_cmds[next_nop]->cmd_link); - writew(0, &p->nop_cmds[next_nop]->cmd_status); - writew(make16(p->xmit_cmds[p->xmit_count]), - &p->nop_cmds[p->xmit_count]->cmd_link); - p->xmit_count = next_nop; - { - unsigned long flags; - spin_lock_irqsave(&p->spinlock); - if (p->xmit_count != p->xmit_last) - netif_wake_queue(dev); - spin_unlock_irqrestore(&p->spinlock); - } - dev_kfree_skb(skb); -#endif - return NETDEV_TX_OK; -} - -/******************************************* - * Someone wanna have the statistics - */ - -static struct net_device_stats *ni52_get_stats(struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - unsigned short crc, aln, rsc, ovrn; - - /* Get error-statistics from the ni82586 */ - crc = readw(&p->scb->crc_errs); - writew(0, &p->scb->crc_errs); - aln = readw(&p->scb->aln_errs); - writew(0, &p->scb->aln_errs); - rsc = readw(&p->scb->rsc_errs); - writew(0, &p->scb->rsc_errs); - ovrn = readw(&p->scb->ovrn_errs); - writew(0, &p->scb->ovrn_errs); - - dev->stats.rx_crc_errors += crc; - dev->stats.rx_fifo_errors += ovrn; - dev->stats.rx_frame_errors += aln; - dev->stats.rx_dropped += rsc; - - return &dev->stats; -} - -/******************************************************** - * Set MC list .. - */ - -static void set_multicast_list(struct net_device *dev) -{ - netif_stop_queue(dev); - ni_disint(); - alloc586(dev); - init586(dev); - startrecv586(dev); - ni_enaint(); - netif_wake_queue(dev); -} - -#ifdef MODULE -static struct net_device *dev_ni52; - -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(memstart, long, 0); -module_param(memend, long, 0); -MODULE_PARM_DESC(io, "NI5210 I/O base address,required"); -MODULE_PARM_DESC(irq, "NI5210 IRQ number,required"); -MODULE_PARM_DESC(memstart, "NI5210 memory base address,required"); -MODULE_PARM_DESC(memend, "NI5210 memory end address,required"); - -int __init init_module(void) -{ - if (io <= 0x0 || !memend || !memstart || irq < 2) { - printk(KERN_ERR "ni52: Autoprobing not allowed for modules.\n"); - printk(KERN_ERR "ni52: Set symbols 'io' 'irq' 'memstart' and 'memend'\n"); - return -ENODEV; - } - dev_ni52 = ni52_probe(-1); - if (IS_ERR(dev_ni52)) - return PTR_ERR(dev_ni52); - return 0; -} - -void __exit cleanup_module(void) -{ - struct priv *p = netdev_priv(dev_ni52); - unregister_netdev(dev_ni52); - iounmap(p->mapped); - release_region(dev_ni52->base_addr, NI52_TOTAL_SIZE); - free_netdev(dev_ni52); -} -#endif /* MODULE */ - -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/i825xx/ni52.h b/drivers/net/ethernet/i825xx/ni52.h deleted file mode 100644 index 0a03b28..0000000 --- a/drivers/net/ethernet/i825xx/ni52.h +++ /dev/null @@ -1,310 +0,0 @@ -/* - * Intel i82586 Ethernet definitions - * - * This is an extension to the Linux operating system, and is covered by the - * same GNU General Public License that covers that work. - * - * copyrights (c) 1994 by Michael Hipp (hippm@informatik.uni-tuebingen.de) - * - * I have done a look in the following sources: - * crynwr-packet-driver by Russ Nelson - * Garret A. Wollman's i82586-driver for BSD - */ - - -#define NI52_RESET 0 /* writing to this address, resets the i82586 */ -#define NI52_ATTENTION 1 /* channel attention, kick the 586 */ -#define NI52_TENA 3 /* 2-5 possibly wrong, Xmit enable */ -#define NI52_TDIS 2 /* Xmit disable */ -#define NI52_INTENA 5 /* Interrupt enable */ -#define NI52_INTDIS 4 /* Interrupt disable */ -#define NI52_MAGIC1 6 /* dunno exact function */ -#define NI52_MAGIC2 7 /* dunno exact function */ - -#define NI52_MAGICVAL1 0x00 /* magic-values for ni5210 card */ -#define NI52_MAGICVAL2 0x55 - -/* - * where to find the System Configuration Pointer (SCP) - */ -#define SCP_DEFAULT_ADDRESS 0xfffff4 - - -/* - * System Configuration Pointer Struct - */ - -struct scp_struct -{ - u16 zero_dum0; /* has to be zero */ - u8 sysbus; /* 0=16Bit,1=8Bit */ - u8 zero_dum1; /* has to be zero for 586 */ - u16 zero_dum2; - u16 zero_dum3; - u32 iscp; /* pointer to the iscp-block */ -}; - - -/* - * Intermediate System Configuration Pointer (ISCP) - */ -struct iscp_struct -{ - u8 busy; /* 586 clears after successful init */ - u8 zero_dummy; /* has to be zero */ - u16 scb_offset; /* pointeroffset to the scb_base */ - u32 scb_base; /* base-address of all 16-bit offsets */ -}; - -/* - * System Control Block (SCB) - */ -struct scb_struct -{ - u8 rus; - u8 cus; - u8 cmd_ruc; /* command word: RU part */ - u8 cmd_cuc; /* command word: CU part & ACK */ - u16 cbl_offset; /* pointeroffset, command block list */ - u16 rfa_offset; /* pointeroffset, receive frame area */ - u16 crc_errs; /* CRC-Error counter */ - u16 aln_errs; /* alignmenterror counter */ - u16 rsc_errs; /* Resourceerror counter */ - u16 ovrn_errs; /* OVerrunerror counter */ -}; - -/* - * possible command values for the command word - */ -#define RUC_MASK 0x0070 /* mask for RU commands */ -#define RUC_NOP 0x0000 /* NOP-command */ -#define RUC_START 0x0010 /* start RU */ -#define RUC_RESUME 0x0020 /* resume RU after suspend */ -#define RUC_SUSPEND 0x0030 /* suspend RU */ -#define RUC_ABORT 0x0040 /* abort receiver operation immediately */ - -#define CUC_MASK 0x07 /* mask for CU command */ -#define CUC_NOP 0x00 /* NOP-command */ -#define CUC_START 0x01 /* start execution of 1. cmd on the CBL */ -#define CUC_RESUME 0x02 /* resume after suspend */ -#define CUC_SUSPEND 0x03 /* Suspend CU */ -#define CUC_ABORT 0x04 /* abort command operation immediately */ - -#define ACK_MASK 0xf0 /* mask for ACK command */ -#define ACK_CX 0x80 /* acknowledges STAT_CX */ -#define ACK_FR 0x40 /* ack. STAT_FR */ -#define ACK_CNA 0x20 /* ack. STAT_CNA */ -#define ACK_RNR 0x10 /* ack. STAT_RNR */ - -/* - * possible status values for the status word - */ -#define STAT_MASK 0xf0 /* mask for cause of interrupt */ -#define STAT_CX 0x80 /* CU finished cmd with its I bit set */ -#define STAT_FR 0x40 /* RU finished receiving a frame */ -#define STAT_CNA 0x20 /* CU left active state */ -#define STAT_RNR 0x10 /* RU left ready state */ - -#define CU_STATUS 0x7 /* CU status, 0=idle */ -#define CU_SUSPEND 0x1 /* CU is suspended */ -#define CU_ACTIVE 0x2 /* CU is active */ - -#define RU_STATUS 0x70 /* RU status, 0=idle */ -#define RU_SUSPEND 0x10 /* RU suspended */ -#define RU_NOSPACE 0x20 /* RU no resources */ -#define RU_READY 0x40 /* RU is ready */ - -/* - * Receive Frame Descriptor (RFD) - */ -struct rfd_struct -{ - u8 stat_low; /* status word */ - u8 stat_high; /* status word */ - u8 rfd_sf; /* 82596 mode only */ - u8 last; /* Bit15,Last Frame on List / Bit14,suspend */ - u16 next; /* linkoffset to next RFD */ - u16 rbd_offset; /* pointeroffset to RBD-buffer */ - u8 dest[6]; /* ethernet-address, destination */ - u8 source[6]; /* ethernet-address, source */ - u16 length; /* 802.3 frame-length */ - u16 zero_dummy; /* dummy */ -}; - -#define RFD_LAST 0x80 /* last: last rfd in the list */ -#define RFD_SUSP 0x40 /* last: suspend RU after */ -#define RFD_COMPL 0x80 -#define RFD_OK 0x20 -#define RFD_BUSY 0x40 -#define RFD_ERR_LEN 0x10 /* Length error (if enabled length-checking */ -#define RFD_ERR_CRC 0x08 /* CRC error */ -#define RFD_ERR_ALGN 0x04 /* Alignment error */ -#define RFD_ERR_RNR 0x02 /* status: receiver out of resources */ -#define RFD_ERR_OVR 0x01 /* DMA Overrun! */ - -#define RFD_ERR_FTS 0x0080 /* Frame to short */ -#define RFD_ERR_NEOP 0x0040 /* No EOP flag (for bitstuffing only) */ -#define RFD_ERR_TRUN 0x0020 /* (82596 only/SF mode) indicates truncated frame */ -#define RFD_MATCHADD 0x0002 /* status: Destinationaddress !matches IA (only 82596) */ -#define RFD_COLLDET 0x0001 /* Detected collision during reception */ - -/* - * Receive Buffer Descriptor (RBD) - */ -struct rbd_struct -{ - u16 status; /* status word,number of used bytes in buff */ - u16 next; /* pointeroffset to next RBD */ - u32 buffer; /* receive buffer address pointer */ - u16 size; /* size of this buffer */ - u16 zero_dummy; /* dummy */ -}; - -#define RBD_LAST 0x8000 /* last buffer */ -#define RBD_USED 0x4000 /* this buffer has data */ -#define RBD_MASK 0x3fff /* size-mask for length */ - -/* - * Statusvalues for Commands/RFD - */ -#define STAT_COMPL 0x8000 /* status: frame/command is complete */ -#define STAT_BUSY 0x4000 /* status: frame/command is busy */ -#define STAT_OK 0x2000 /* status: frame/command is ok */ - -/* - * Action-Commands - */ -#define CMD_NOP 0x0000 /* NOP */ -#define CMD_IASETUP 0x0001 /* initial address setup command */ -#define CMD_CONFIGURE 0x0002 /* configure command */ -#define CMD_MCSETUP 0x0003 /* MC setup command */ -#define CMD_XMIT 0x0004 /* transmit command */ -#define CMD_TDR 0x0005 /* time domain reflectometer (TDR) command */ -#define CMD_DUMP 0x0006 /* dump command */ -#define CMD_DIAGNOSE 0x0007 /* diagnose command */ - -/* - * Action command bits - */ -#define CMD_LAST 0x8000 /* indicates last command in the CBL */ -#define CMD_SUSPEND 0x4000 /* suspend CU after this CB */ -#define CMD_INT 0x2000 /* generate interrupt after execution */ - -/* - * NOP - command - */ -struct nop_cmd_struct -{ - u16 cmd_status; /* status of this command */ - u16 cmd_cmd; /* the command itself (+bits) */ - u16 cmd_link; /* offsetpointer to next command */ -}; - -/* - * IA Setup command - */ -struct iasetup_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u8 iaddr[6]; -}; - -/* - * Configure command - */ -struct configure_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u8 byte_cnt; /* size of the config-cmd */ - u8 fifo; /* fifo/recv monitor */ - u8 sav_bf; /* save bad frames (bit7=1)*/ - u8 adr_len; /* adr_len(0-2),al_loc(3),pream(4-5),loopbak(6-7)*/ - u8 priority; /* lin_prio(0-2),exp_prio(4-6),bof_metd(7) */ - u8 ifs; /* inter frame spacing */ - u8 time_low; /* slot time low */ - u8 time_high; /* slot time high(0-2) and max. retries(4-7) */ - u8 promisc; /* promisc-mode(0) , et al (1-7) */ - u8 carr_coll; /* carrier(0-3)/collision(4-7) stuff */ - u8 fram_len; /* minimal frame len */ - u8 dummy; /* dummy */ -}; - -/* - * Multicast Setup command - */ -struct mcsetup_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u16 mc_cnt; /* number of bytes in the MC-List */ - u8 mc_list[0][6]; /* pointer to 6 bytes entries */ -}; - -/* - * DUMP command - */ -struct dump_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u16 dump_offset; /* pointeroffset to DUMP space */ -}; - -/* - * transmit command - */ -struct transmit_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u16 tbd_offset; /* pointeroffset to TBD */ - u8 dest[6]; /* destination address of the frame */ - u16 length; /* user defined: 802.3 length / Ether type */ -}; - -#define TCMD_ERRMASK 0x0fa0 -#define TCMD_MAXCOLLMASK 0x000f -#define TCMD_MAXCOLL 0x0020 -#define TCMD_HEARTBEAT 0x0040 -#define TCMD_DEFERRED 0x0080 -#define TCMD_UNDERRUN 0x0100 -#define TCMD_LOSTCTS 0x0200 -#define TCMD_NOCARRIER 0x0400 -#define TCMD_LATECOLL 0x0800 - -struct tdr_cmd_struct -{ - u16 cmd_status; - u16 cmd_cmd; - u16 cmd_link; - u16 status; -}; - -#define TDR_LNK_OK 0x8000 /* No link problem identified */ -#define TDR_XCVR_PRB 0x4000 /* indicates a transceiver problem */ -#define TDR_ET_OPN 0x2000 /* open, no correct termination */ -#define TDR_ET_SRT 0x1000 /* TDR detected a short circuit */ -#define TDR_TIMEMASK 0x07ff /* mask for the time field */ - -/* - * Transmit Buffer Descriptor (TBD) - */ -struct tbd_struct -{ - u16 size; /* size + EOF-Flag(15) */ - u16 next; /* pointeroffset to next TBD */ - u32 buffer; /* pointer to buffer */ -}; - -#define TBD_LAST 0x8000 /* EOF-Flag, indicates last buffer in list */ - - - - diff --git a/drivers/net/ethernet/i825xx/znet.c b/drivers/net/ethernet/i825xx/znet.c deleted file mode 100644 index c9479e0..0000000 --- a/drivers/net/ethernet/i825xx/znet.c +++ /dev/null @@ -1,928 +0,0 @@ -/* znet.c: An Zenith Z-Note ethernet driver for linux. */ - -/* - Written by Donald Becker. - - The author may be reached as becker@scyld.com. - This driver is based on the Linux skeleton driver. The copyright of the - skeleton driver is held by the United States Government, as represented - by DIRNSA, and it is released under the GPL. - - Thanks to Mike Hollick for alpha testing and suggestions. - - References: - The Crynwr packet driver. - - "82593 CSMA/CD Core LAN Controller" Intel datasheet, 1992 - Intel Microcommunications Databook, Vol. 1, 1990. - As usual with Intel, the documentation is incomplete and inaccurate. - I had to read the Crynwr packet driver to figure out how to actually - use the i82593, and guess at what register bits matched the loosely - related i82586. - - Theory of Operation - - The i82593 used in the Zenith Z-Note series operates using two(!) slave - DMA channels, one interrupt, and one 8-bit I/O port. - - While there several ways to configure '593 DMA system, I chose the one - that seemed commensurate with the highest system performance in the face - of moderate interrupt latency: Both DMA channels are configured as - recirculating ring buffers, with one channel (#0) dedicated to Rx and - the other channel (#1) to Tx and configuration. (Note that this is - different than the Crynwr driver, where the Tx DMA channel is initialized - before each operation. That approach simplifies operation and Tx error - recovery, but requires additional I/O in normal operation and precludes - transmit buffer chaining.) - - Both rings are set to 8192 bytes using {TX,RX}_RING_SIZE. This provides - a reasonable ring size for Rx, while simplifying DMA buffer allocation -- - DMA buffers must not cross a 128K boundary. (In truth the size selection - was influenced by my lack of '593 documentation. I thus was constrained - to use the Crynwr '593 initialization table, which sets the Rx ring size - to 8K.) - - Despite my usual low opinion about Intel-designed parts, I must admit - that the bulk data handling of the i82593 is a good design for - an integrated system, like a laptop, where using two slave DMA channels - doesn't pose a problem. I still take issue with using only a single I/O - port. In the same controlled environment there are essentially no - limitations on I/O space, and using multiple locations would eliminate - the need for multiple operations when looking at status registers, - setting the Rx ring boundary, or switching to promiscuous mode. - - I also question Zenith's selection of the '593: one of the advertised - advantages of earlier Intel parts was that if you figured out the magic - initialization incantation you could use the same part on many different - network types. Zenith's use of the "FriendlyNet" (sic) connector rather - than an on-board transceiver leads me to believe that they were planning - to take advantage of this. But, uhmmm, the '593 omits all but ethernet - functionality from the serial subsystem. - */ - -/* 10/2002 - - o Resurected for Linux 2.5+ by Marc Zyngier <maz@wild-wind.fr.eu.org> : - - - Removed strange DMA snooping in znet_sent_packet, which lead to - TX buffer corruption on my laptop. - - Use init_etherdev stuff. - - Use kmalloc-ed DMA buffers. - - Use as few global variables as possible. - - Use proper resources management. - - Use wireless/i82593.h as much as possible (structure, constants) - - Compiles as module or build-in. - - Now survives unplugging/replugging cable. - - Some code was taken from wavelan_cs. - - Tested on a vintage Zenith Z-Note 433Lnp+. Probably broken on - anything else. Testers (and detailed bug reports) are welcome :-). - - o TODO : - - - Properly handle multicast - - Understand why some traffic patterns add a 1s latency... - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/if_arp.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/dma.h> - -#include <linux/i82593.h> - -static char version[] __initdata = "znet.c:v1.02 9/23/94 becker@scyld.com\n"; - -#ifndef ZNET_DEBUG -#define ZNET_DEBUG 1 -#endif -static unsigned int znet_debug = ZNET_DEBUG; -module_param (znet_debug, int, 0); -MODULE_PARM_DESC (znet_debug, "ZNet debug level"); -MODULE_LICENSE("GPL"); - -/* The DMA modes we need aren't in <dma.h>. */ -#define DMA_RX_MODE 0x14 /* Auto init, I/O to mem, ++, demand. */ -#define DMA_TX_MODE 0x18 /* Auto init, Mem to I/O, ++, demand. */ -#define dma_page_eq(ptr1, ptr2) ((long)(ptr1)>>17 == (long)(ptr2)>>17) -#define RX_BUF_SIZE 8192 -#define TX_BUF_SIZE 8192 -#define DMA_BUF_SIZE (RX_BUF_SIZE + 16) /* 8k + 16 bytes for trailers */ - -#define TX_TIMEOUT (HZ/10) - -struct znet_private { - int rx_dma, tx_dma; - spinlock_t lock; - short sia_base, sia_size, io_size; - struct i82593_conf_block i593_init; - /* The starting, current, and end pointers for the packet buffers. */ - ushort *rx_start, *rx_cur, *rx_end; - ushort *tx_start, *tx_cur, *tx_end; - ushort tx_buf_len; /* Tx buffer length, in words. */ -}; - -/* Only one can be built-in;-> */ -static struct net_device *znet_dev; - -#define NETIDBLK_MAGIC "NETIDBLK" -#define NETIDBLK_MAGIC_SIZE 8 - -struct netidblk { - char magic[NETIDBLK_MAGIC_SIZE]; /* The magic number (string) "NETIDBLK" */ - unsigned char netid[8]; /* The physical station address */ - char nettype, globalopt; - char vendor[8]; /* The machine vendor and product name. */ - char product[8]; - char irq1, irq2; /* Interrupts, only one is currently used. */ - char dma1, dma2; - short dma_mem_misc[8]; /* DMA buffer locations (unused in Linux). */ - short iobase1, iosize1; - short iobase2, iosize2; /* Second iobase unused. */ - char driver_options; /* Misc. bits */ - char pad; -}; - -static int znet_open(struct net_device *dev); -static netdev_tx_t znet_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t znet_interrupt(int irq, void *dev_id); -static void znet_rx(struct net_device *dev); -static int znet_close(struct net_device *dev); -static void hardware_init(struct net_device *dev); -static void update_stop_hit(short ioaddr, unsigned short rx_stop_offset); -static void znet_tx_timeout (struct net_device *dev); - -/* Request needed resources */ -static int znet_request_resources (struct net_device *dev) -{ - struct znet_private *znet = netdev_priv(dev); - - if (request_irq (dev->irq, znet_interrupt, 0, "ZNet", dev)) - goto failed; - if (request_dma (znet->rx_dma, "ZNet rx")) - goto free_irq; - if (request_dma (znet->tx_dma, "ZNet tx")) - goto free_rx_dma; - if (!request_region (znet->sia_base, znet->sia_size, "ZNet SIA")) - goto free_tx_dma; - if (!request_region (dev->base_addr, znet->io_size, "ZNet I/O")) - goto free_sia; - - return 0; /* Happy ! */ - - free_sia: - release_region (znet->sia_base, znet->sia_size); - free_tx_dma: - free_dma (znet->tx_dma); - free_rx_dma: - free_dma (znet->rx_dma); - free_irq: - free_irq (dev->irq, dev); - failed: - return -1; -} - -static void znet_release_resources (struct net_device *dev) -{ - struct znet_private *znet = netdev_priv(dev); - - release_region (znet->sia_base, znet->sia_size); - release_region (dev->base_addr, znet->io_size); - free_dma (znet->tx_dma); - free_dma (znet->rx_dma); - free_irq (dev->irq, dev); -} - -/* Keep the magical SIA stuff in a single function... */ -static void znet_transceiver_power (struct net_device *dev, int on) -{ - struct znet_private *znet = netdev_priv(dev); - unsigned char v; - - /* Turn on/off the 82501 SIA, using zenith-specific magic. */ - /* Select LAN control register */ - outb(0x10, znet->sia_base); - - if (on) - v = inb(znet->sia_base + 1) | 0x84; - else - v = inb(znet->sia_base + 1) & ~0x84; - - outb(v, znet->sia_base+1); /* Turn on/off LAN power (bit 2). */ -} - -/* Init the i82593, with current promisc/mcast configuration. - Also used from hardware_init. */ -static void znet_set_multicast_list (struct net_device *dev) -{ - struct znet_private *znet = netdev_priv(dev); - short ioaddr = dev->base_addr; - struct i82593_conf_block *cfblk = &znet->i593_init; - - memset(cfblk, 0x00, sizeof(struct i82593_conf_block)); - - /* The configuration block. What an undocumented nightmare. - The first set of values are those suggested (without explanation) - for ethernet in the Intel 82586 databook. The rest appear to be - completely undocumented, except for cryptic notes in the Crynwr - packet driver. This driver uses the Crynwr values verbatim. */ - - /* maz : Rewritten to take advantage of the wanvelan includes. - At least we have names, not just blind values */ - - /* Byte 0 */ - cfblk->fifo_limit = 10; /* = 16 B rx and 80 B tx fifo thresholds */ - cfblk->forgnesi = 0; /* 0=82C501, 1=AMD7992B compatibility */ - cfblk->fifo_32 = 1; - cfblk->d6mod = 0; /* Run in i82593 advanced mode */ - cfblk->throttle_enb = 1; - - /* Byte 1 */ - cfblk->throttle = 8; /* Continuous w/interrupts, 128-clock DMA. */ - cfblk->cntrxint = 0; /* enable continuous mode receive interrupts */ - cfblk->contin = 1; /* enable continuous mode */ - - /* Byte 2 */ - cfblk->addr_len = ETH_ALEN; - cfblk->acloc = 1; /* Disable source addr insertion by i82593 */ - cfblk->preamb_len = 2; /* 8 bytes preamble */ - cfblk->loopback = 0; /* Loopback off */ - - /* Byte 3 */ - cfblk->lin_prio = 0; /* Default priorities & backoff methods. */ - cfblk->tbofstop = 0; - cfblk->exp_prio = 0; - cfblk->bof_met = 0; - - /* Byte 4 */ - cfblk->ifrm_spc = 6; /* 96 bit times interframe spacing */ - - /* Byte 5 */ - cfblk->slottim_low = 0; /* 512 bit times slot time (low) */ - - /* Byte 6 */ - cfblk->slottim_hi = 2; /* 512 bit times slot time (high) */ - cfblk->max_retr = 15; /* 15 collisions retries */ - - /* Byte 7 */ - cfblk->prmisc = ((dev->flags & IFF_PROMISC) ? 1 : 0); /* Promiscuous mode */ - cfblk->bc_dis = 0; /* Enable broadcast reception */ - cfblk->crs_1 = 0; /* Don't transmit without carrier sense */ - cfblk->nocrc_ins = 0; /* i82593 generates CRC */ - cfblk->crc_1632 = 0; /* 32-bit Autodin-II CRC */ - cfblk->crs_cdt = 0; /* CD not to be interpreted as CS */ - - /* Byte 8 */ - cfblk->cs_filter = 0; /* CS is recognized immediately */ - cfblk->crs_src = 0; /* External carrier sense */ - cfblk->cd_filter = 0; /* CD is recognized immediately */ - - /* Byte 9 */ - cfblk->min_fr_len = ETH_ZLEN >> 2; /* Minimum frame length */ - - /* Byte A */ - cfblk->lng_typ = 1; /* Type/length checks OFF */ - cfblk->lng_fld = 1; /* Disable 802.3 length field check */ - cfblk->rxcrc_xf = 1; /* Don't transfer CRC to memory */ - cfblk->artx = 1; /* Disable automatic retransmission */ - cfblk->sarec = 1; /* Disable source addr trig of CD */ - cfblk->tx_jabber = 0; /* Disable jabber jam sequence */ - cfblk->hash_1 = 1; /* Use bits 0-5 in mc address hash */ - cfblk->lbpkpol = 0; /* Loopback pin active high */ - - /* Byte B */ - cfblk->fdx = 0; /* Disable full duplex operation */ - - /* Byte C */ - cfblk->dummy_6 = 0x3f; /* all ones, Default multicast addresses & backoff. */ - cfblk->mult_ia = 0; /* No multiple individual addresses */ - cfblk->dis_bof = 0; /* Disable the backoff algorithm ?! */ - - /* Byte D */ - cfblk->dummy_1 = 1; /* set to 1 */ - cfblk->tx_ifs_retrig = 3; /* Hmm... Disabled */ - cfblk->mc_all = (!netdev_mc_empty(dev) || - (dev->flags & IFF_ALLMULTI)); /* multicast all mode */ - cfblk->rcv_mon = 0; /* Monitor mode disabled */ - cfblk->frag_acpt = 0; /* Do not accept fragments */ - cfblk->tstrttrs = 0; /* No start transmission threshold */ - - /* Byte E */ - cfblk->fretx = 1; /* FIFO automatic retransmission */ - cfblk->runt_eop = 0; /* drop "runt" packets */ - cfblk->hw_sw_pin = 0; /* ?? */ - cfblk->big_endn = 0; /* Big Endian ? no... */ - cfblk->syncrqs = 1; /* Synchronous DRQ deassertion... */ - cfblk->sttlen = 1; /* 6 byte status registers */ - cfblk->rx_eop = 0; /* Signal EOP on packet reception */ - cfblk->tx_eop = 0; /* Signal EOP on packet transmission */ - - /* Byte F */ - cfblk->rbuf_size = RX_BUF_SIZE >> 12; /* Set receive buffer size */ - cfblk->rcvstop = 1; /* Enable Receive Stop Register */ - - if (znet_debug > 2) { - int i; - unsigned char *c; - - for (i = 0, c = (char *) cfblk; i < sizeof (*cfblk); i++) - printk ("%02X ", c[i]); - printk ("\n"); - } - - *znet->tx_cur++ = sizeof(struct i82593_conf_block); - memcpy(znet->tx_cur, cfblk, sizeof(struct i82593_conf_block)); - znet->tx_cur += sizeof(struct i82593_conf_block)/2; - outb(OP0_CONFIGURE | CR0_CHNL, ioaddr); - - /* XXX FIXME maz : Add multicast addresses here, so having a - * multicast address configured isn't equal to IFF_ALLMULTI */ -} - -static const struct net_device_ops znet_netdev_ops = { - .ndo_open = znet_open, - .ndo_stop = znet_close, - .ndo_start_xmit = znet_send_packet, - .ndo_set_rx_mode = znet_set_multicast_list, - .ndo_tx_timeout = znet_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/* The Z-Note probe is pretty easy. The NETIDBLK exists in the safe-to-probe - BIOS area. We just scan for the signature, and pull the vital parameters - out of the structure. */ - -static int __init znet_probe (void) -{ - int i; - struct netidblk *netinfo; - struct znet_private *znet; - struct net_device *dev; - char *p; - char *plast = phys_to_virt(0x100000 - NETIDBLK_MAGIC_SIZE); - int err = -ENOMEM; - - /* This code scans the region 0xf0000 to 0xfffff for a "NETIDBLK". */ - for(p = (char *)phys_to_virt(0xf0000); p <= plast; p++) - if (*p == 'N' && - strncmp(p, NETIDBLK_MAGIC, NETIDBLK_MAGIC_SIZE) == 0) - break; - - if (p > plast) { - if (znet_debug > 1) - printk(KERN_INFO "No Z-Note ethernet adaptor found.\n"); - return -ENODEV; - } - - dev = alloc_etherdev(sizeof(struct znet_private)); - if (!dev) - return -ENOMEM; - - znet = netdev_priv(dev); - - netinfo = (struct netidblk *)p; - dev->base_addr = netinfo->iobase1; - dev->irq = netinfo->irq1; - - /* The station address is in the "netidblk" at 0x0f0000. */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = netinfo->netid[i]; - - printk(KERN_INFO "%s: ZNET at %#3lx, %pM" - ", using IRQ %d DMA %d and %d.\n", - dev->name, dev->base_addr, dev->dev_addr, - dev->irq, netinfo->dma1, netinfo->dma2); - - if (znet_debug > 1) { - printk(KERN_INFO "%s: vendor '%16.16s' IRQ1 %d IRQ2 %d DMA1 %d DMA2 %d.\n", - dev->name, netinfo->vendor, - netinfo->irq1, netinfo->irq2, - netinfo->dma1, netinfo->dma2); - printk(KERN_INFO "%s: iobase1 %#x size %d iobase2 %#x size %d net type %2.2x.\n", - dev->name, netinfo->iobase1, netinfo->iosize1, - netinfo->iobase2, netinfo->iosize2, netinfo->nettype); - } - - if (znet_debug > 0) - printk(KERN_INFO "%s", version); - - znet->rx_dma = netinfo->dma1; - znet->tx_dma = netinfo->dma2; - spin_lock_init(&znet->lock); - znet->sia_base = 0xe6; /* Magic address for the 82501 SIA */ - znet->sia_size = 2; - /* maz: Despite the '593 being advertised above as using a - * single 8bits I/O port, this driver does many 16bits - * access. So set io_size accordingly */ - znet->io_size = 2; - - if (!(znet->rx_start = kmalloc (DMA_BUF_SIZE, GFP_KERNEL | GFP_DMA))) - goto free_dev; - if (!(znet->tx_start = kmalloc (DMA_BUF_SIZE, GFP_KERNEL | GFP_DMA))) - goto free_rx; - - if (!dma_page_eq (znet->rx_start, znet->rx_start + (RX_BUF_SIZE/2-1)) || - !dma_page_eq (znet->tx_start, znet->tx_start + (TX_BUF_SIZE/2-1))) { - printk (KERN_WARNING "tx/rx crossing DMA frontiers, giving up\n"); - goto free_tx; - } - - znet->rx_end = znet->rx_start + RX_BUF_SIZE/2; - znet->tx_buf_len = TX_BUF_SIZE/2; - znet->tx_end = znet->tx_start + znet->tx_buf_len; - - /* The ZNET-specific entries in the device structure. */ - dev->netdev_ops = &znet_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - err = register_netdev(dev); - if (err) - goto free_tx; - znet_dev = dev; - return 0; - - free_tx: - kfree(znet->tx_start); - free_rx: - kfree(znet->rx_start); - free_dev: - free_netdev(dev); - return err; -} - - -static int znet_open(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - if (znet_debug > 2) - printk(KERN_DEBUG "%s: znet_open() called.\n", dev->name); - - /* These should never fail. You can't add devices to a sealed box! */ - if (znet_request_resources (dev)) { - printk(KERN_WARNING "%s: Not opened -- resource busy?!?\n", dev->name); - return -EBUSY; - } - - znet_transceiver_power (dev, 1); - - /* According to the Crynwr driver we should wait 50 msec. for the - LAN clock to stabilize. My experiments indicates that the '593 can - be initialized immediately. The delay is probably needed for the - DC-to-DC converter to come up to full voltage, and for the oscillator - to be spot-on at 20Mhz before transmitting. - Until this proves to be a problem we rely on the higher layers for the - delay and save allocating a timer entry. */ - - /* maz : Well, I'm getting every time the following message - * without the delay on a 486@33. This machine is much too - * fast... :-) So maybe the Crynwr driver wasn't wrong after - * all, even if the message is completly harmless on my - * setup. */ - mdelay (50); - - /* This follows the packet driver's lead, and checks for success. */ - if (inb(ioaddr) != 0x10 && inb(ioaddr) != 0x00) - printk(KERN_WARNING "%s: Problem turning on the transceiver power.\n", - dev->name); - - hardware_init(dev); - netif_start_queue (dev); - - return 0; -} - - -static void znet_tx_timeout (struct net_device *dev) -{ - int ioaddr = dev->base_addr; - ushort event, tx_status, rx_offset, state; - - outb (CR0_STATUS_0, ioaddr); - event = inb (ioaddr); - outb (CR0_STATUS_1, ioaddr); - tx_status = inw (ioaddr); - outb (CR0_STATUS_2, ioaddr); - rx_offset = inw (ioaddr); - outb (CR0_STATUS_3, ioaddr); - state = inb (ioaddr); - printk (KERN_WARNING "%s: transmit timed out, status %02x %04x %04x %02x," - " resetting.\n", dev->name, event, tx_status, rx_offset, state); - if (tx_status == TX_LOST_CRS) - printk (KERN_WARNING "%s: Tx carrier error, check transceiver cable.\n", - dev->name); - outb (OP0_RESET, ioaddr); - hardware_init (dev); - netif_wake_queue (dev); -} - -static netdev_tx_t znet_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - int ioaddr = dev->base_addr; - struct znet_private *znet = netdev_priv(dev); - unsigned long flags; - short length = skb->len; - - if (znet_debug > 4) - printk(KERN_DEBUG "%s: ZNet_send_packet.\n", dev->name); - - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - - netif_stop_queue (dev); - - /* Check that the part hasn't reset itself, probably from suspend. */ - outb(CR0_STATUS_0, ioaddr); - if (inw(ioaddr) == 0x0010 && - inw(ioaddr) == 0x0000 && - inw(ioaddr) == 0x0010) { - if (znet_debug > 1) - printk (KERN_WARNING "%s : waking up\n", dev->name); - hardware_init(dev); - znet_transceiver_power (dev, 1); - } - - if (1) { - unsigned char *buf = (void *)skb->data; - ushort *tx_link = znet->tx_cur - 1; - ushort rnd_len = (length + 1)>>1; - - dev->stats.tx_bytes+=length; - - if (znet->tx_cur >= znet->tx_end) - znet->tx_cur = znet->tx_start; - *znet->tx_cur++ = length; - if (znet->tx_cur + rnd_len + 1 > znet->tx_end) { - int semi_cnt = (znet->tx_end - znet->tx_cur)<<1; /* Cvrt to byte cnt. */ - memcpy(znet->tx_cur, buf, semi_cnt); - rnd_len -= semi_cnt>>1; - memcpy(znet->tx_start, buf + semi_cnt, length - semi_cnt); - znet->tx_cur = znet->tx_start + rnd_len; - } else { - memcpy(znet->tx_cur, buf, skb->len); - znet->tx_cur += rnd_len; - } - *znet->tx_cur++ = 0; - - spin_lock_irqsave(&znet->lock, flags); - { - *tx_link = OP0_TRANSMIT | CR0_CHNL; - /* Is this always safe to do? */ - outb(OP0_TRANSMIT | CR0_CHNL, ioaddr); - } - spin_unlock_irqrestore (&znet->lock, flags); - - netif_start_queue (dev); - - if (znet_debug > 4) - printk(KERN_DEBUG "%s: Transmitter queued, length %d.\n", dev->name, length); - } - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -/* The ZNET interrupt handler. */ -static irqreturn_t znet_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct znet_private *znet = netdev_priv(dev); - int ioaddr; - int boguscnt = 20; - int handled = 0; - - spin_lock (&znet->lock); - - ioaddr = dev->base_addr; - - outb(CR0_STATUS_0, ioaddr); - do { - ushort status = inb(ioaddr); - if (znet_debug > 5) { - ushort result, rx_ptr, running; - outb(CR0_STATUS_1, ioaddr); - result = inw(ioaddr); - outb(CR0_STATUS_2, ioaddr); - rx_ptr = inw(ioaddr); - outb(CR0_STATUS_3, ioaddr); - running = inb(ioaddr); - printk(KERN_DEBUG "%s: interrupt, status %02x, %04x %04x %02x serial %d.\n", - dev->name, status, result, rx_ptr, running, boguscnt); - } - if ((status & SR0_INTERRUPT) == 0) - break; - - handled = 1; - - if ((status & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE || - (status & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE || - (status & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE) { - int tx_status; - outb(CR0_STATUS_1, ioaddr); - tx_status = inw(ioaddr); - /* It's undocumented, but tx_status seems to match the i82586. */ - if (tx_status & TX_OK) { - dev->stats.tx_packets++; - dev->stats.collisions += tx_status & TX_NCOL_MASK; - } else { - if (tx_status & (TX_LOST_CTS | TX_LOST_CRS)) - dev->stats.tx_carrier_errors++; - if (tx_status & TX_UND_RUN) - dev->stats.tx_fifo_errors++; - if (!(tx_status & TX_HRT_BEAT)) - dev->stats.tx_heartbeat_errors++; - if (tx_status & TX_MAX_COL) - dev->stats.tx_aborted_errors++; - /* ...and the catch-all. */ - if ((tx_status | (TX_LOST_CRS | TX_LOST_CTS | TX_UND_RUN | TX_HRT_BEAT | TX_MAX_COL)) != (TX_LOST_CRS | TX_LOST_CTS | TX_UND_RUN | TX_HRT_BEAT | TX_MAX_COL)) - dev->stats.tx_errors++; - - /* Transceiver may be stuck if cable - * was removed while emitting a - * packet. Flip it off, then on to - * reset it. This is very empirical, - * but it seems to work. */ - - znet_transceiver_power (dev, 0); - znet_transceiver_power (dev, 1); - } - netif_wake_queue (dev); - } - - if ((status & SR0_RECEPTION) || - (status & SR0_EVENT_MASK) == SR0_STOP_REG_HIT) { - znet_rx(dev); - } - /* Clear the interrupts we've handled. */ - outb(CR0_INT_ACK, ioaddr); - } while (boguscnt--); - - spin_unlock (&znet->lock); - - return IRQ_RETVAL(handled); -} - -static void znet_rx(struct net_device *dev) -{ - struct znet_private *znet = netdev_priv(dev); - int ioaddr = dev->base_addr; - int boguscount = 1; - short next_frame_end_offset = 0; /* Offset of next frame start. */ - short *cur_frame_end; - short cur_frame_end_offset; - - outb(CR0_STATUS_2, ioaddr); - cur_frame_end_offset = inw(ioaddr); - - if (cur_frame_end_offset == znet->rx_cur - znet->rx_start) { - printk(KERN_WARNING "%s: Interrupted, but nothing to receive, offset %03x.\n", - dev->name, cur_frame_end_offset); - return; - } - - /* Use same method as the Crynwr driver: construct a forward list in - the same area of the backwards links we now have. This allows us to - pass packets to the upper layers in the order they were received -- - important for fast-path sequential operations. */ - while (znet->rx_start + cur_frame_end_offset != znet->rx_cur && - ++boguscount < 5) { - unsigned short hi_cnt, lo_cnt, hi_status, lo_status; - int count, status; - - if (cur_frame_end_offset < 4) { - /* Oh no, we have a special case: the frame trailer wraps around - the end of the ring buffer. We've saved space at the end of - the ring buffer for just this problem. */ - memcpy(znet->rx_end, znet->rx_start, 8); - cur_frame_end_offset += (RX_BUF_SIZE/2); - } - cur_frame_end = znet->rx_start + cur_frame_end_offset - 4; - - lo_status = *cur_frame_end++; - hi_status = *cur_frame_end++; - status = ((hi_status & 0xff) << 8) + (lo_status & 0xff); - lo_cnt = *cur_frame_end++; - hi_cnt = *cur_frame_end++; - count = ((hi_cnt & 0xff) << 8) + (lo_cnt & 0xff); - - if (znet_debug > 5) - printk(KERN_DEBUG "Constructing trailer at location %03x, %04x %04x %04x %04x" - " count %#x status %04x.\n", - cur_frame_end_offset<<1, lo_status, hi_status, lo_cnt, hi_cnt, - count, status); - cur_frame_end[-4] = status; - cur_frame_end[-3] = next_frame_end_offset; - cur_frame_end[-2] = count; - next_frame_end_offset = cur_frame_end_offset; - cur_frame_end_offset -= ((count + 1)>>1) + 3; - if (cur_frame_end_offset < 0) - cur_frame_end_offset += RX_BUF_SIZE/2; - } - - /* Now step forward through the list. */ - do { - ushort *this_rfp_ptr = znet->rx_start + next_frame_end_offset; - int status = this_rfp_ptr[-4]; - int pkt_len = this_rfp_ptr[-2]; - - if (znet_debug > 5) - printk(KERN_DEBUG "Looking at trailer ending at %04x status %04x length %03x" - " next %04x.\n", next_frame_end_offset<<1, status, pkt_len, - this_rfp_ptr[-3]<<1); - /* Once again we must assume that the i82586 docs apply. */ - if ( ! (status & RX_RCV_OK)) { /* There was an error. */ - dev->stats.rx_errors++; - if (status & RX_CRC_ERR) dev->stats.rx_crc_errors++; - if (status & RX_ALG_ERR) dev->stats.rx_frame_errors++; -#if 0 - if (status & 0x0200) dev->stats.rx_over_errors++; /* Wrong. */ - if (status & 0x0100) dev->stats.rx_fifo_errors++; -#else - /* maz : Wild guess... */ - if (status & RX_OVRRUN) dev->stats.rx_over_errors++; -#endif - if (status & RX_SRT_FRM) dev->stats.rx_length_errors++; - } else if (pkt_len > 1536) { - dev->stats.rx_length_errors++; - } else { - /* Malloc up new buffer. */ - struct sk_buff *skb; - - skb = netdev_alloc_skb(dev, pkt_len); - if (skb == NULL) { - if (znet_debug) - printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - break; - } - - if (&znet->rx_cur[(pkt_len+1)>>1] > znet->rx_end) { - int semi_cnt = (znet->rx_end - znet->rx_cur)<<1; - memcpy(skb_put(skb,semi_cnt), znet->rx_cur, semi_cnt); - memcpy(skb_put(skb,pkt_len-semi_cnt), znet->rx_start, - pkt_len - semi_cnt); - } else { - memcpy(skb_put(skb,pkt_len), znet->rx_cur, pkt_len); - if (znet_debug > 6) { - unsigned int *packet = (unsigned int *) skb->data; - printk(KERN_DEBUG "Packet data is %08x %08x %08x %08x.\n", packet[0], - packet[1], packet[2], packet[3]); - } - } - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - znet->rx_cur = this_rfp_ptr; - if (znet->rx_cur >= znet->rx_end) - znet->rx_cur -= RX_BUF_SIZE/2; - update_stop_hit(ioaddr, (znet->rx_cur - znet->rx_start)<<1); - next_frame_end_offset = this_rfp_ptr[-3]; - if (next_frame_end_offset == 0) /* Read all the frames? */ - break; /* Done for now */ - this_rfp_ptr = znet->rx_start + next_frame_end_offset; - } while (--boguscount); - - /* If any worth-while packets have been received, dev_rint() - has done a mark_bh(INET_BH) for us and will work on them - when we get to the bottom-half routine. */ -} - -/* The inverse routine to znet_open(). */ -static int znet_close(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - netif_stop_queue (dev); - - outb(OP0_RESET, ioaddr); /* CMD0_RESET */ - - if (znet_debug > 1) - printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name); - /* Turn off transceiver power. */ - znet_transceiver_power (dev, 0); - - znet_release_resources (dev); - - return 0; -} - -static void show_dma(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - unsigned char stat = inb (ioaddr); - struct znet_private *znet = netdev_priv(dev); - unsigned long flags; - short dma_port = ((znet->tx_dma&3)<<2) + IO_DMA2_BASE; - unsigned addr = inb(dma_port); - short residue; - - addr |= inb(dma_port) << 8; - residue = get_dma_residue(znet->tx_dma); - - if (znet_debug > 1) { - flags=claim_dma_lock(); - printk(KERN_DEBUG "Stat:%02x Addr: %04x cnt:%3x\n", - stat, addr<<1, residue); - release_dma_lock(flags); - } -} - -/* Initialize the hardware. We have to do this when the board is open()ed - or when we come out of suspend mode. */ -static void hardware_init(struct net_device *dev) -{ - unsigned long flags; - short ioaddr = dev->base_addr; - struct znet_private *znet = netdev_priv(dev); - - znet->rx_cur = znet->rx_start; - znet->tx_cur = znet->tx_start; - - /* Reset the chip, and start it up. */ - outb(OP0_RESET, ioaddr); - - flags=claim_dma_lock(); - disable_dma(znet->rx_dma); /* reset by an interrupting task. */ - clear_dma_ff(znet->rx_dma); - set_dma_mode(znet->rx_dma, DMA_RX_MODE); - set_dma_addr(znet->rx_dma, isa_virt_to_bus(znet->rx_start)); - set_dma_count(znet->rx_dma, RX_BUF_SIZE); - enable_dma(znet->rx_dma); - /* Now set up the Tx channel. */ - disable_dma(znet->tx_dma); - clear_dma_ff(znet->tx_dma); - set_dma_mode(znet->tx_dma, DMA_TX_MODE); - set_dma_addr(znet->tx_dma, isa_virt_to_bus(znet->tx_start)); - set_dma_count(znet->tx_dma, znet->tx_buf_len<<1); - enable_dma(znet->tx_dma); - release_dma_lock(flags); - - if (znet_debug > 1) - printk(KERN_DEBUG "%s: Initializing the i82593, rx buf %p tx buf %p\n", - dev->name, znet->rx_start,znet->tx_start); - /* Do an empty configure command, just like the Crynwr driver. This - resets to chip to its default values. */ - *znet->tx_cur++ = 0; - *znet->tx_cur++ = 0; - show_dma(dev); - outb(OP0_CONFIGURE | CR0_CHNL, ioaddr); - - znet_set_multicast_list (dev); - - *znet->tx_cur++ = 6; - memcpy(znet->tx_cur, dev->dev_addr, 6); - znet->tx_cur += 3; - show_dma(dev); - outb(OP0_IA_SETUP | CR0_CHNL, ioaddr); - show_dma(dev); - - update_stop_hit(ioaddr, 8192); - if (znet_debug > 1) printk(KERN_DEBUG "enabling Rx.\n"); - outb(OP0_RCV_ENABLE, ioaddr); - netif_start_queue (dev); -} - -static void update_stop_hit(short ioaddr, unsigned short rx_stop_offset) -{ - outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, ioaddr); - if (znet_debug > 5) - printk(KERN_DEBUG "Updating stop hit with value %02x.\n", - (rx_stop_offset >> 6) | CR1_STOP_REG_UPDATE); - outb((rx_stop_offset >> 6) | CR1_STOP_REG_UPDATE, ioaddr); - outb(OP1_SWIT_TO_PORT_0, ioaddr); -} - -static __exit void znet_cleanup (void) -{ - if (znet_dev) { - struct znet_private *znet = netdev_priv(znet_dev); - - unregister_netdev (znet_dev); - kfree (znet->rx_start); - kfree (znet->tx_start); - free_netdev (znet_dev); - } -} - -module_init (znet_probe); -module_exit (znet_cleanup); diff --git a/drivers/net/ethernet/racal/Kconfig b/drivers/net/ethernet/racal/Kconfig deleted file mode 100644 index 01969e0..0000000 --- a/drivers/net/ethernet/racal/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -# -# Racal-Interlan device configuration -# - -config NET_VENDOR_RACAL - bool "Racal-Interlan (Micom) NI devices" - default y - depends on ISA - ---help--- - If you have a network (Ethernet) card belonging to this class, such - as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. - - Note that the answer to this question doesn't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about NI cards. If you say Y, you will be asked for - your specific card in the following questions. - -if NET_VENDOR_RACAL - -config NI5010 - tristate "NI5010 support (EXPERIMENTAL)" - depends on ISA && EXPERIMENTAL && BROKEN_ON_SMP - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. Note that this is still - experimental code. - - To compile this driver as a module, choose M here. The module - will be called ni5010. - -endif # NET_VENDOR_RACAL diff --git a/drivers/net/ethernet/racal/Makefile b/drivers/net/ethernet/racal/Makefile deleted file mode 100644 index 1e210ca..0000000 --- a/drivers/net/ethernet/racal/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Racal-Interlan network device drivers. -# - -obj-$(CONFIG_NI5010) += ni5010.o diff --git a/drivers/net/ethernet/racal/ni5010.c b/drivers/net/ethernet/racal/ni5010.c deleted file mode 100644 index 8079822..0000000 --- a/drivers/net/ethernet/racal/ni5010.c +++ /dev/null @@ -1,771 +0,0 @@ -/* ni5010.c: A network driver for the MiCom-Interlan NI5010 ethercard. - * - * Copyright 1996,1997,2006 Jan-Pascal van Best and Andreas Mohr. - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * The authors may be reached as: - * janpascal@vanbest.org andi@lisas.de - * - * Sources: - * Donald Becker's "skeleton.c" - * Crynwr ni5010 packet driver - * - * Changes: - * v0.0: First test version - * v0.1: First working version - * v0.2: - * v0.3->v0.90: Now demand setting io and irq when loading as module - * 970430 v0.91: modified for Linux 2.1.14 - * v0.92: Implemented Andreas' (better) NI5010 probe - * 970503 v0.93: Fixed auto-irq failure on warm reboot (JB) - * 970623 v1.00: First kernel version (AM) - * 970814 v1.01: Added detection of onboard receive buffer size (AM) - * 060611 v1.02: slight cleanup: email addresses, driver modernization. - * Bugs: - * - not SMP-safe (no locking of I/O accesses) - * - Note that you have to patch ifconfig for the new /proc/net/dev - * format. It gives incorrect stats otherwise. - * - * To do: - * Fix all bugs :-) - * Move some stuff to chipset_init() - * Handle xmt errors other than collisions - * Complete merge with Andreas' driver - * Implement ring buffers (Is this useful? You can't squeeze - * too many packet in a 2k buffer!) - * Implement DMA (Again, is this useful? Some docs say DMA is - * slower than programmed I/O) - * - * Compile with: - * gcc -O2 -fomit-frame-pointer -m486 -D__KERNEL__ \ - * -DMODULE -c ni5010.c - * - * Insert with e.g.: - * insmod ni5010.ko io=0x300 irq=5 - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/bitops.h> -#include <asm/io.h> -#include <asm/dma.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> - -#include "ni5010.h" - -static const char boardname[] = "NI5010"; -static char version[] __initdata = - "ni5010.c: v1.02 20060611 Jan-Pascal van Best and Andreas Mohr\n"; - -/* bufsize_rcv == 0 means autoprobing */ -static unsigned int bufsize_rcv; - -#define JUMPERED_INTERRUPTS /* IRQ line jumpered on board */ -#undef JUMPERED_DMA /* No DMA used */ -#undef FULL_IODETECT /* Only detect in portlist */ - -#ifndef FULL_IODETECT -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int ports[] __initdata = - { 0x300, 0x320, 0x340, 0x360, 0x380, 0x3a0, 0 }; -#endif - -/* Use 0 for production, 1 for verification, >2 for debug */ -#ifndef NI5010_DEBUG -#define NI5010_DEBUG 0 -#endif - -/* Information that needs to be kept for each board. */ -struct ni5010_local { - int o_pkt_size; - spinlock_t lock; -}; - -/* Index to functions, as function prototypes. */ - -static int ni5010_probe1(struct net_device *dev, int ioaddr); -static int ni5010_open(struct net_device *dev); -static int ni5010_send_packet(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t ni5010_interrupt(int irq, void *dev_id); -static void ni5010_rx(struct net_device *dev); -static void ni5010_timeout(struct net_device *dev); -static int ni5010_close(struct net_device *dev); -static void ni5010_set_multicast_list(struct net_device *dev); -static void reset_receiver(struct net_device *dev); - -static int process_xmt_interrupt(struct net_device *dev); -#define tx_done(dev) 1 -static void hardware_send_packet(struct net_device *dev, char *buf, int length, int pad); -static void chipset_init(struct net_device *dev, int startp); -static void dump_packet(void *buf, int len); -static void ni5010_show_registers(struct net_device *dev); - -static int io; -static int irq; - -struct net_device * __init ni5010_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct ni5010_local)); - int *port; - int err = 0; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - } - - PRINTK2((KERN_DEBUG "%s: Entering ni5010_probe\n", dev->name)); - - if (io > 0x1ff) { /* Check a single specified location. */ - err = ni5010_probe1(dev, io); - } else if (io != 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { -#ifdef FULL_IODETECT - for (io=0x200; io<0x400 && ni5010_probe1(dev, io) ; io+=0x20) - ; - if (io == 0x400) - err = -ENODEV; - -#else - for (port = ports; *port && ni5010_probe1(dev, *port); port++) - ; - if (!*port) - err = -ENODEV; -#endif /* FULL_IODETECT */ - } - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - release_region(dev->base_addr, NI5010_IO_EXTENT); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static inline int rd_port(int ioaddr) -{ - inb(IE_RBUF); - return inb(IE_SAPROM); -} - -static void __init trigger_irq(int ioaddr) -{ - outb(0x00, EDLC_RESET); /* Clear EDLC hold RESET state */ - outb(0x00, IE_RESET); /* Board reset */ - outb(0x00, EDLC_XMASK); /* Disable all Xmt interrupts */ - outb(0x00, EDLC_RMASK); /* Disable all Rcv interrupt */ - outb(0xff, EDLC_XCLR); /* Clear all pending Xmt interrupts */ - outb(0xff, EDLC_RCLR); /* Clear all pending Rcv interrupts */ - /* - * Transmit packet mode: Ignore parity, Power xcvr, - * Enable loopback - */ - outb(XMD_IG_PAR | XMD_T_MODE | XMD_LBC, EDLC_XMODE); - outb(RMD_BROADCAST, EDLC_RMODE); /* Receive normal&broadcast */ - outb(XM_ALL, EDLC_XMASK); /* Enable all Xmt interrupts */ - udelay(50); /* FIXME: Necessary? */ - outb(MM_EN_XMT|MM_MUX, IE_MMODE); /* Start transmission */ -} - -static const struct net_device_ops ni5010_netdev_ops = { - .ndo_open = ni5010_open, - .ndo_stop = ni5010_close, - .ndo_start_xmit = ni5010_send_packet, - .ndo_set_rx_mode = ni5010_set_multicast_list, - .ndo_tx_timeout = ni5010_timeout, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -}; - -/* - * This is the real probe routine. Linux has a history of friendly device - * probes on the ISA bus. A good device probes avoids doing writes, and - * verifies that the correct device exists and functions. - */ - -static int __init ni5010_probe1(struct net_device *dev, int ioaddr) -{ - static unsigned version_printed; - struct ni5010_local *lp; - int i; - unsigned int data = 0; - int boguscount = 40; - int err = -ENODEV; - - dev->base_addr = ioaddr; - dev->irq = irq; - - if (!request_region(ioaddr, NI5010_IO_EXTENT, boardname)) - return -EBUSY; - - /* - * This is no "official" probe method, I've rather tested which - * probe works best with my seven NI5010 cards - * (they have very different serial numbers) - * Suggestions or failure reports are very, very welcome ! - * But I think it is a relatively good probe method - * since it doesn't use any "outb" - * It should be nearly 100% reliable ! - * well-known WARNING: this probe method (like many others) - * will hang the system if a NE2000 card region is probed ! - * - * - Andreas - */ - - PRINTK2((KERN_DEBUG "%s: entering ni5010_probe1(%#3x)\n", - dev->name, ioaddr)); - - if (inb(ioaddr+0) == 0xff) - goto out; - - while ( (rd_port(ioaddr) & rd_port(ioaddr) & rd_port(ioaddr) & - rd_port(ioaddr) & rd_port(ioaddr) & rd_port(ioaddr)) != 0xff) - { - if (boguscount-- == 0) - goto out; - } - - PRINTK2((KERN_DEBUG "%s: I/O #1 passed!\n", dev->name)); - - for (i=0; i<32; i++) - if ( (data = rd_port(ioaddr)) != 0xff) break; - if (data==0xff) - goto out; - - PRINTK2((KERN_DEBUG "%s: I/O #2 passed!\n", dev->name)); - - if ((data != SA_ADDR0) || (rd_port(ioaddr) != SA_ADDR1) || - (rd_port(ioaddr) != SA_ADDR2)) - goto out; - - for (i=0; i<4; i++) - rd_port(ioaddr); - - if ( (rd_port(ioaddr) != NI5010_MAGICVAL1) || - (rd_port(ioaddr) != NI5010_MAGICVAL2) ) - goto out; - - PRINTK2((KERN_DEBUG "%s: I/O #3 passed!\n", dev->name)); - - if (NI5010_DEBUG && version_printed++ == 0) - printk(KERN_INFO "%s", version); - - printk("NI5010 ethercard probe at 0x%x: ", ioaddr); - - dev->base_addr = ioaddr; - - for (i=0; i<6; i++) { - outw(i, IE_GP); - dev->dev_addr[i] = inb(IE_SAPROM); - } - printk("%pM ", dev->dev_addr); - - PRINTK2((KERN_DEBUG "%s: I/O #4 passed!\n", dev->name)); - -#ifdef JUMPERED_INTERRUPTS - if (dev->irq == 0xff) - ; - else if (dev->irq < 2) { - unsigned long irq_mask; - - PRINTK2((KERN_DEBUG "%s: I/O #5 passed!\n", dev->name)); - - irq_mask = probe_irq_on(); - trigger_irq(ioaddr); - mdelay(20); - dev->irq = probe_irq_off(irq_mask); - - PRINTK2((KERN_DEBUG "%s: I/O #6 passed!\n", dev->name)); - - if (dev->irq == 0) { - err = -EAGAIN; - printk(KERN_WARNING "%s: no IRQ found!\n", dev->name); - goto out; - } - PRINTK2((KERN_DEBUG "%s: I/O #7 passed!\n", dev->name)); - } else if (dev->irq == 2) { - dev->irq = 9; - } -#endif /* JUMPERED_INTERRUPTS */ - PRINTK2((KERN_DEBUG "%s: I/O #9 passed!\n", dev->name)); - - /* DMA is not supported (yet?), so no use detecting it */ - lp = netdev_priv(dev); - - spin_lock_init(&lp->lock); - - PRINTK2((KERN_DEBUG "%s: I/O #10 passed!\n", dev->name)); - -/* get the size of the onboard receive buffer - * higher addresses than bufsize are wrapped into real buffer - * i.e. data for offs. 0x801 is written to 0x1 with a 2K onboard buffer - */ - if (!bufsize_rcv) { - outb(1, IE_MMODE); /* Put Rcv buffer on system bus */ - outw(0, IE_GP); /* Point GP at start of packet */ - outb(0, IE_RBUF); /* set buffer byte 0 to 0 */ - for (i = 1; i < 0xff; i++) { - outw(i << 8, IE_GP); /* Point GP at packet size to be tested */ - outb(i, IE_RBUF); - outw(0x0, IE_GP); /* Point GP at start of packet */ - data = inb(IE_RBUF); - if (data == i) break; - } - bufsize_rcv = i << 8; - outw(0, IE_GP); /* Point GP at start of packet */ - outb(0, IE_RBUF); /* set buffer byte 0 to 0 again */ - } - printk("-> bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE); - - dev->netdev_ops = &ni5010_netdev_ops; - dev->watchdog_timeo = HZ/20; - - dev->flags &= ~IFF_MULTICAST; /* Multicast doesn't work */ - - /* Shut up the ni5010 */ - outb(0, EDLC_RMASK); /* Mask all receive interrupts */ - outb(0, EDLC_XMASK); /* Mask all xmit interrupts */ - outb(0xff, EDLC_RCLR); /* Kill all pending rcv interrupts */ - outb(0xff, EDLC_XCLR); /* Kill all pending xmt interrupts */ - - printk(KERN_INFO "%s: NI5010 found at 0x%x, using IRQ %d", dev->name, ioaddr, dev->irq); - if (dev->dma) - printk(" & DMA %d", dev->dma); - printk(".\n"); - return 0; -out: - release_region(dev->base_addr, NI5010_IO_EXTENT); - return err; -} - -/* - * Open/initialize the board. This is called (in the current kernel) - * sometime after booting when the 'ifconfig' program is run. - * - * This routine should set everything up anew at each open, even - * registers that "should" only need to be set once at boot, so that - * there is a non-reboot way to recover if something goes wrong. - */ - -static int ni5010_open(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - int i; - - PRINTK2((KERN_DEBUG "%s: entering ni5010_open()\n", dev->name)); - - if (request_irq(dev->irq, ni5010_interrupt, 0, boardname, dev)) { - printk(KERN_WARNING "%s: Cannot get irq %#2x\n", dev->name, dev->irq); - return -EAGAIN; - } - PRINTK3((KERN_DEBUG "%s: passed open() #1\n", dev->name)); - /* - * Always allocate the DMA channel after the IRQ, - * and clean up on failure. - */ -#ifdef JUMPERED_DMA - if (request_dma(dev->dma, cardname)) { - printk(KERN_WARNING "%s: Cannot get dma %#2x\n", dev->name, dev->dma); - free_irq(dev->irq, NULL); - return -EAGAIN; - } -#endif /* JUMPERED_DMA */ - - PRINTK3((KERN_DEBUG "%s: passed open() #2\n", dev->name)); - /* Reset the hardware here. Don't forget to set the station address. */ - - outb(RS_RESET, EDLC_RESET); /* Hold up EDLC_RESET while configing board */ - outb(0, IE_RESET); /* Hardware reset of ni5010 board */ - outb(XMD_LBC, EDLC_XMODE); /* Only loopback xmits */ - - PRINTK3((KERN_DEBUG "%s: passed open() #3\n", dev->name)); - /* Set the station address */ - for(i = 0;i < 6; i++) { - outb(dev->dev_addr[i], EDLC_ADDR + i); - } - - PRINTK3((KERN_DEBUG "%s: Initialising ni5010\n", dev->name)); - outb(0, EDLC_XMASK); /* No xmit interrupts for now */ - outb(XMD_IG_PAR | XMD_T_MODE | XMD_LBC, EDLC_XMODE); - /* Normal packet xmit mode */ - outb(0xff, EDLC_XCLR); /* Clear all pending xmit interrupts */ - outb(RMD_BROADCAST, EDLC_RMODE); - /* Receive broadcast and normal packets */ - reset_receiver(dev); /* Ready ni5010 for receiving packets */ - - outb(0, EDLC_RESET); /* Un-reset the ni5010 */ - - netif_start_queue(dev); - - if (NI5010_DEBUG) ni5010_show_registers(dev); - - PRINTK((KERN_DEBUG "%s: open successful\n", dev->name)); - return 0; -} - -static void reset_receiver(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - PRINTK3((KERN_DEBUG "%s: resetting receiver\n", dev->name)); - outw(0, IE_GP); /* Receive packet at start of buffer */ - outb(0xff, EDLC_RCLR); /* Clear all pending rcv interrupts */ - outb(0, IE_MMODE); /* Put EDLC to rcv buffer */ - outb(MM_EN_RCV, IE_MMODE); /* Enable rcv */ - outb(0xff, EDLC_RMASK); /* Enable all rcv interrupts */ -} - -static void ni5010_timeout(struct net_device *dev) -{ - printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name, - tx_done(dev) ? "IRQ conflict" : "network cable problem"); - /* Try to restart the adaptor. */ - /* FIXME: Give it a real kick here */ - chipset_init(dev, 1); - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); -} - -static int ni5010_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; - - PRINTK2((KERN_DEBUG "%s: entering ni5010_send_packet\n", dev->name)); - - /* - * Block sending - */ - - netif_stop_queue(dev); - hardware_send_packet(dev, (unsigned char *)skb->data, skb->len, length-skb->len); - dev_kfree_skb (skb); - return NETDEV_TX_OK; -} - -/* - * The typical workload of the driver: - * Handle the network interface interrupts. - */ -static irqreturn_t ni5010_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct ni5010_local *lp; - int ioaddr, status; - int xmit_was_error = 0; - - PRINTK2((KERN_DEBUG "%s: entering ni5010_interrupt\n", dev->name)); - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - - spin_lock(&lp->lock); - status = inb(IE_ISTAT); - PRINTK3((KERN_DEBUG "%s: IE_ISTAT = %#02x\n", dev->name, status)); - - if ((status & IS_R_INT) == 0) ni5010_rx(dev); - - if ((status & IS_X_INT) == 0) { - xmit_was_error = process_xmt_interrupt(dev); - } - - if ((status & IS_DMA_INT) == 0) { - PRINTK((KERN_DEBUG "%s: DMA complete (?)\n", dev->name)); - outb(0, IE_DMA_RST); /* Reset DMA int */ - } - - if (!xmit_was_error) - reset_receiver(dev); - spin_unlock(&lp->lock); - return IRQ_HANDLED; -} - - -static void dump_packet(void *buf, int len) -{ - int i; - - printk(KERN_DEBUG "Packet length = %#4x\n", len); - for (i = 0; i < len; i++){ - if (i % 16 == 0) printk(KERN_DEBUG "%#4.4x", i); - if (i % 2 == 0) printk(" "); - printk("%2.2x", ((unsigned char *)buf)[i]); - if (i % 16 == 15) printk("\n"); - } - printk("\n"); -} - -/* We have a good packet, get it out of the buffer. */ -static void ni5010_rx(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - unsigned char rcv_stat; - struct sk_buff *skb; - int i_pkt_size; - - PRINTK2((KERN_DEBUG "%s: entering ni5010_rx()\n", dev->name)); - - rcv_stat = inb(EDLC_RSTAT); - PRINTK3((KERN_DEBUG "%s: EDLC_RSTAT = %#2x\n", dev->name, rcv_stat)); - - if ( (rcv_stat & RS_VALID_BITS) != RS_PKT_OK) { - PRINTK((KERN_INFO "%s: receive error.\n", dev->name)); - dev->stats.rx_errors++; - if (rcv_stat & RS_RUNT) dev->stats.rx_length_errors++; - if (rcv_stat & RS_ALIGN) dev->stats.rx_frame_errors++; - if (rcv_stat & RS_CRC_ERR) dev->stats.rx_crc_errors++; - if (rcv_stat & RS_OFLW) dev->stats.rx_fifo_errors++; - outb(0xff, EDLC_RCLR); /* Clear the interrupt */ - return; - } - - outb(0xff, EDLC_RCLR); /* Clear the interrupt */ - - i_pkt_size = inw(IE_RCNT); - if (i_pkt_size > ETH_FRAME_LEN || i_pkt_size < 10 ) { - PRINTK((KERN_DEBUG "%s: Packet size error, packet size = %#4.4x\n", - dev->name, i_pkt_size)); - dev->stats.rx_errors++; - dev->stats.rx_length_errors++; - return; - } - - /* Malloc up new buffer. */ - skb = netdev_alloc_skb(dev, i_pkt_size + 3); - if (skb == NULL) { - printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - return; - } - - skb_reserve(skb, 2); - - /* Read packet into buffer */ - outb(MM_MUX, IE_MMODE); /* Rcv buffer to system bus */ - outw(0, IE_GP); /* Seek to beginning of packet */ - insb(IE_RBUF, skb_put(skb, i_pkt_size), i_pkt_size); - - if (NI5010_DEBUG >= 4) - dump_packet(skb->data, skb->len); - - skb->protocol = eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += i_pkt_size; - - PRINTK2((KERN_DEBUG "%s: Received packet, size=%#4.4x\n", - dev->name, i_pkt_size)); -} - -static int process_xmt_interrupt(struct net_device *dev) -{ - struct ni5010_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - int xmit_stat; - - PRINTK2((KERN_DEBUG "%s: entering process_xmt_interrupt\n", dev->name)); - - xmit_stat = inb(EDLC_XSTAT); - PRINTK3((KERN_DEBUG "%s: EDLC_XSTAT = %2.2x\n", dev->name, xmit_stat)); - - outb(0, EDLC_XMASK); /* Disable xmit IRQ's */ - outb(0xff, EDLC_XCLR); /* Clear all pending xmit IRQ's */ - - if (xmit_stat & XS_COLL){ - PRINTK((KERN_DEBUG "%s: collision detected, retransmitting\n", - dev->name)); - outw(NI5010_BUFSIZE - lp->o_pkt_size, IE_GP); - /* outb(0, IE_MMODE); */ /* xmt buf on sysbus FIXME: needed ? */ - outb(MM_EN_XMT | MM_MUX, IE_MMODE); - outb(XM_ALL, EDLC_XMASK); /* Enable xmt IRQ's */ - dev->stats.collisions++; - return 1; - } - - /* FIXME: handle other xmt error conditions */ - - dev->stats.tx_packets++; - dev->stats.tx_bytes += lp->o_pkt_size; - netif_wake_queue(dev); - - PRINTK2((KERN_DEBUG "%s: sent packet, size=%#4.4x\n", - dev->name, lp->o_pkt_size)); - - return 0; -} - -/* The inverse routine to ni5010_open(). */ -static int ni5010_close(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - PRINTK2((KERN_DEBUG "%s: entering ni5010_close\n", dev->name)); -#ifdef JUMPERED_INTERRUPTS - free_irq(dev->irq, NULL); -#endif - /* Put card in held-RESET state */ - outb(0, IE_MMODE); - outb(RS_RESET, EDLC_RESET); - - netif_stop_queue(dev); - - PRINTK((KERN_DEBUG "%s: %s closed down\n", dev->name, boardname)); - return 0; - -} - -/* Set or clear the multicast filter for this adaptor. - num_addrs == -1 Promiscuous mode, receive all packets - num_addrs == 0 Normal mode, clear multicast list - num_addrs > 0 Multicast mode, receive normal and MC packets, and do - best-effort filtering. -*/ -static void ni5010_set_multicast_list(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - - PRINTK2((KERN_DEBUG "%s: entering set_multicast_list\n", dev->name)); - - if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || - !netdev_mc_empty(dev)) { - outb(RMD_PROMISC, EDLC_RMODE); /* Enable promiscuous mode */ - PRINTK((KERN_DEBUG "%s: Entering promiscuous mode\n", dev->name)); - } else { - PRINTK((KERN_DEBUG "%s: Entering broadcast mode\n", dev->name)); - outb(RMD_BROADCAST, EDLC_RMODE); /* Disable promiscuous mode, use normal mode */ - } -} - -static void hardware_send_packet(struct net_device *dev, char *buf, int length, int pad) -{ - struct ni5010_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - unsigned long flags; - unsigned int buf_offs; - - PRINTK2((KERN_DEBUG "%s: entering hardware_send_packet\n", dev->name)); - - if (length > ETH_FRAME_LEN) { - PRINTK((KERN_WARNING "%s: packet too large, not possible\n", - dev->name)); - return; - } - - if (NI5010_DEBUG) ni5010_show_registers(dev); - - if (inb(IE_ISTAT) & IS_EN_XMT) { - PRINTK((KERN_WARNING "%s: sending packet while already transmitting, not possible\n", - dev->name)); - return; - } - - if (NI5010_DEBUG > 3) dump_packet(buf, length); - - buf_offs = NI5010_BUFSIZE - length - pad; - - spin_lock_irqsave(&lp->lock, flags); - lp->o_pkt_size = length + pad; - - outb(0, EDLC_RMASK); /* Mask all receive interrupts */ - outb(0, IE_MMODE); /* Put Xmit buffer on system bus */ - outb(0xff, EDLC_RCLR); /* Clear out pending rcv interrupts */ - - outw(buf_offs, IE_GP); /* Point GP at start of packet */ - outsb(IE_XBUF, buf, length); /* Put data in buffer */ - while(pad--) - outb(0, IE_XBUF); - - outw(buf_offs, IE_GP); /* Rewrite where packet starts */ - - /* should work without that outb() (Crynwr used it) */ - /*outb(MM_MUX, IE_MMODE);*/ /* Xmt buffer to EDLC bus */ - outb(MM_EN_XMT | MM_MUX, IE_MMODE); /* Begin transmission */ - outb(XM_ALL, EDLC_XMASK); /* Cause interrupt after completion or fail */ - - spin_unlock_irqrestore(&lp->lock, flags); - - netif_wake_queue(dev); - - if (NI5010_DEBUG) ni5010_show_registers(dev); -} - -static void chipset_init(struct net_device *dev, int startp) -{ - /* FIXME: Move some stuff here */ - PRINTK3((KERN_DEBUG "%s: doing NOTHING in chipset_init\n", dev->name)); -} - -static void ni5010_show_registers(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - PRINTK3((KERN_DEBUG "%s: XSTAT %#2.2x\n", dev->name, inb(EDLC_XSTAT))); - PRINTK3((KERN_DEBUG "%s: XMASK %#2.2x\n", dev->name, inb(EDLC_XMASK))); - PRINTK3((KERN_DEBUG "%s: RSTAT %#2.2x\n", dev->name, inb(EDLC_RSTAT))); - PRINTK3((KERN_DEBUG "%s: RMASK %#2.2x\n", dev->name, inb(EDLC_RMASK))); - PRINTK3((KERN_DEBUG "%s: RMODE %#2.2x\n", dev->name, inb(EDLC_RMODE))); - PRINTK3((KERN_DEBUG "%s: XMODE %#2.2x\n", dev->name, inb(EDLC_XMODE))); - PRINTK3((KERN_DEBUG "%s: ISTAT %#2.2x\n", dev->name, inb(IE_ISTAT))); -} - -#ifdef MODULE -static struct net_device *dev_ni5010; - -module_param(io, int, 0); -module_param(irq, int, 0); -MODULE_PARM_DESC(io, "ni5010 I/O base address"); -MODULE_PARM_DESC(irq, "ni5010 IRQ number"); - -static int __init ni5010_init_module(void) -{ - PRINTK2((KERN_DEBUG "%s: entering init_module\n", boardname)); - /* - if(io <= 0 || irq == 0){ - printk(KERN_WARNING "%s: Autoprobing not allowed for modules.\n", boardname); - printk(KERN_WARNING "%s: Set symbols 'io' and 'irq'\n", boardname); - return -EINVAL; - } - */ - if (io <= 0){ - printk(KERN_WARNING "%s: Autoprobing for modules is hazardous, trying anyway..\n", boardname); - } - - PRINTK2((KERN_DEBUG "%s: init_module irq=%#2x, io=%#3x\n", boardname, irq, io)); - dev_ni5010 = ni5010_probe(-1); - if (IS_ERR(dev_ni5010)) - return PTR_ERR(dev_ni5010); - return 0; -} - -static void __exit ni5010_cleanup_module(void) -{ - PRINTK2((KERN_DEBUG "%s: entering cleanup_module\n", boardname)); - unregister_netdev(dev_ni5010); - release_region(dev_ni5010->base_addr, NI5010_IO_EXTENT); - free_netdev(dev_ni5010); -} -module_init(ni5010_init_module); -module_exit(ni5010_cleanup_module); -#endif /* MODULE */ -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/racal/ni5010.h b/drivers/net/ethernet/racal/ni5010.h deleted file mode 100644 index e10e717..0000000 --- a/drivers/net/ethernet/racal/ni5010.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Racal-Interlan ni5010 Ethernet definitions - * - * This is an extension to the Linux operating system, and is covered by the - * same GNU General Public License that covers that work. - * - * copyrights (c) 1996 by Jan-Pascal van Best (jvbest@wi.leidenuniv.nl) - * - * I have done a look in the following sources: - * crynwr-packet-driver by Russ Nelson - */ - -#define NI5010_BUFSIZE 2048 /* number of bytes in a buffer */ - -#define NI5010_MAGICVAL0 0x00 /* magic-values for ni5010 card */ -#define NI5010_MAGICVAL1 0x55 -#define NI5010_MAGICVAL2 0xAA - -#define SA_ADDR0 0x02 -#define SA_ADDR1 0x07 -#define SA_ADDR2 0x01 - -/* The number of low I/O ports used by the ni5010 ethercard. */ -#define NI5010_IO_EXTENT 32 - -#define PRINTK(x) if (NI5010_DEBUG) printk x -#define PRINTK2(x) if (NI5010_DEBUG>=2) printk x -#define PRINTK3(x) if (NI5010_DEBUG>=3) printk x - -/* The various IE command registers */ -#define EDLC_XSTAT (ioaddr + 0x00) /* EDLC transmit csr */ -#define EDLC_XCLR (ioaddr + 0x00) /* EDLC transmit "Clear IRQ" */ -#define EDLC_XMASK (ioaddr + 0x01) /* EDLC transmit "IRQ Masks" */ -#define EDLC_RSTAT (ioaddr + 0x02) /* EDLC receive csr */ -#define EDLC_RCLR (ioaddr + 0x02) /* EDLC receive "Clear IRQ" */ -#define EDLC_RMASK (ioaddr + 0x03) /* EDLC receive "IRQ Masks" */ -#define EDLC_XMODE (ioaddr + 0x04) /* EDLC transmit Mode */ -#define EDLC_RMODE (ioaddr + 0x05) /* EDLC receive Mode */ -#define EDLC_RESET (ioaddr + 0x06) /* EDLC RESET register */ -#define EDLC_TDR1 (ioaddr + 0x07) /* "Time Domain Reflectometry" reg1 */ -#define EDLC_ADDR (ioaddr + 0x08) /* EDLC station address, 6 bytes */ - /* 0x0E doesn't exist for r/w */ -#define EDLC_TDR2 (ioaddr + 0x0f) /* "Time Domain Reflectometry" reg2 */ -#define IE_GP (ioaddr + 0x10) /* GP pointer (word register) */ - /* 0x11 is 2nd byte of GP Pointer */ -#define IE_RCNT (ioaddr + 0x10) /* Count of bytes in rcv'd packet */ - /* 0x11 is 2nd byte of "Byte Count" */ -#define IE_MMODE (ioaddr + 0x12) /* Memory Mode register */ -#define IE_DMA_RST (ioaddr + 0x13) /* IE DMA Reset. write only */ -#define IE_ISTAT (ioaddr + 0x13) /* IE Interrupt Status. read only */ -#define IE_RBUF (ioaddr + 0x14) /* IE Receive Buffer port */ -#define IE_XBUF (ioaddr + 0x15) /* IE Transmit Buffer port */ -#define IE_SAPROM (ioaddr + 0x16) /* window on station addr prom */ -#define IE_RESET (ioaddr + 0x17) /* any write causes Board Reset */ - -/* bits in EDLC_XSTAT, interrupt clear on write, status when read */ -#define XS_TPOK 0x80 /* transmit packet successful */ -#define XS_CS 0x40 /* carrier sense */ -#define XS_RCVD 0x20 /* transmitted packet received */ -#define XS_SHORT 0x10 /* transmission media is shorted */ -#define XS_UFLW 0x08 /* underflow. iff failed board */ -#define XS_COLL 0x04 /* collision occurred */ -#define XS_16COLL 0x02 /* 16th collision occurred */ -#define XS_PERR 0x01 /* parity error */ - -#define XS_CLR_UFLW 0x08 /* clear underflow */ -#define XS_CLR_COLL 0x04 /* clear collision */ -#define XS_CLR_16COLL 0x02 /* clear 16th collision */ -#define XS_CLR_PERR 0x01 /* clear parity error */ - -/* bits in EDLC_XMASK, mask/enable transmit interrupts. register is r/w */ -#define XM_TPOK 0x80 /* =1 to enable Xmt Pkt OK interrupts */ -#define XM_RCVD 0x20 /* =1 to enable Xmt Pkt Rcvd ints */ -#define XM_UFLW 0x08 /* =1 to enable Xmt Underflow ints */ -#define XM_COLL 0x04 /* =1 to enable Xmt Collision ints */ -#define XM_COLL16 0x02 /* =1 to enable Xmt 16th Coll ints */ -#define XM_PERR 0x01 /* =1 to enable Xmt Parity Error ints */ - /* note: always clear this bit */ -#define XM_ALL (XM_TPOK | XM_RCVD | XM_UFLW | XM_COLL | XM_COLL16) - -/* bits in EDLC_RSTAT, interrupt clear on write, status when read */ -#define RS_PKT_OK 0x80 /* received good packet */ -#define RS_RST_PKT 0x10 /* RESET packet received */ -#define RS_RUNT 0x08 /* Runt Pkt rcvd. Len < 64 Bytes */ -#define RS_ALIGN 0x04 /* Alignment error. not 8 bit aligned */ -#define RS_CRC_ERR 0x02 /* Bad CRC on rcvd pkt */ -#define RS_OFLW 0x01 /* overflow for rcv FIFO */ -#define RS_VALID_BITS ( RS_PKT_OK | RS_RST_PKT | RS_RUNT | RS_ALIGN | RS_CRC_ERR | RS_OFLW ) - /* all valid RSTAT bits */ - -#define RS_CLR_PKT_OK 0x80 /* clear rcvd packet interrupt */ -#define RS_CLR_RST_PKT 0x10 /* clear RESET packet received */ -#define RS_CLR_RUNT 0x08 /* clear Runt Pckt received */ -#define RS_CLR_ALIGN 0x04 /* clear Alignment error */ -#define RS_CLR_CRC_ERR 0x02 /* clear CRC error */ -#define RS_CLR_OFLW 0x01 /* clear rcv FIFO Overflow */ - -/* bits in EDLC_RMASK, mask/enable receive interrupts. register is r/w */ -#define RM_PKT_OK 0x80 /* =1 to enable rcvd good packet ints */ -#define RM_RST_PKT 0x10 /* =1 to enable RESET packet ints */ -#define RM_RUNT 0x08 /* =1 to enable Runt Pkt rcvd ints */ -#define RM_ALIGN 0x04 /* =1 to enable Alignment error ints */ -#define RM_CRC_ERR 0x02 /* =1 to enable Bad CRC error ints */ -#define RM_OFLW 0x01 /* =1 to enable overflow error ints */ - -/* bits in EDLC_RMODE, set Receive Packet mode. register is r/w */ -#define RMD_TEST 0x80 /* =1 for Chip testing. normally 0 */ -#define RMD_ADD_SIZ 0x10 /* =1 5-byte addr match. normally 0 */ -#define RMD_EN_RUNT 0x08 /* =1 enable runt rcv. normally 0 */ -#define RMD_EN_RST 0x04 /* =1 to rcv RESET pkt. normally 0 */ - -#define RMD_PROMISC 0x03 /* receive *all* packets. unusual */ -#define RMD_MULTICAST 0x02 /* receive multicasts too. unusual */ -#define RMD_BROADCAST 0x01 /* receive broadcasts & normal. usual */ -#define RMD_NO_PACKETS 0x00 /* don't receive any packets. unusual */ - -/* bits in EDLC_XMODE, set Transmit Packet mode. register is r/w */ -#define XMD_COLL_CNT 0xf0 /* coll's since success. read-only */ -#define XMD_IG_PAR 0x08 /* =1 to ignore parity. ALWAYS set */ -#define XMD_T_MODE 0x04 /* =1 to power xcvr. ALWAYS set this */ -#define XMD_LBC 0x02 /* =1 for loopbakc. normally set */ -#define XMD_DIS_C 0x01 /* =1 disables contention. normally 0 */ - -/* bits in EDLC_RESET, write only */ -#define RS_RESET 0x80 /* =1 to hold EDLC in reset state */ - -/* bits in IE_MMODE, write only */ -#define MM_EN_DMA 0x80 /* =1 begin DMA xfer, Cplt clrs it */ -#define MM_EN_RCV 0x40 /* =1 allows Pkt rcv. clr'd by rcv */ -#define MM_EN_XMT 0x20 /* =1 begin Xmt pkt. Cplt clrs it */ -#define MM_BUS_PAGE 0x18 /* =00 ALWAYS. Used when MUX=1 */ -#define MM_NET_PAGE 0x06 /* =00 ALWAYS. Used when MUX=0 */ -#define MM_MUX 0x01 /* =1 means Rcv Buff on system bus */ - /* =0 means Xmt Buff on system bus */ - -/* bits in IE_ISTAT, read only */ -#define IS_TDIAG 0x80 /* =1 if Diagnostic problem */ -#define IS_EN_RCV 0x20 /* =1 until frame is rcv'd cplt */ -#define IS_EN_XMT 0x10 /* =1 until frame is xmt'd cplt */ -#define IS_EN_DMA 0x08 /* =1 until DMA is cplt or aborted */ -#define IS_DMA_INT 0x04 /* =0 iff DMA done interrupt. */ -#define IS_R_INT 0x02 /* =0 iff unmasked Rcv interrupt */ -#define IS_X_INT 0x01 /* =0 iff unmasked Xmt interrupt */ - diff --git a/drivers/net/ethernet/seeq/Kconfig b/drivers/net/ethernet/seeq/Kconfig index 29f1853..a71e1ec 100644 --- a/drivers/net/ethernet/seeq/Kconfig +++ b/drivers/net/ethernet/seeq/Kconfig @@ -26,17 +26,6 @@ config ARM_ETHER3 If you have an Acorn system with one of these network cards, you should say Y to this option if you wish to use it with Linux. -config SEEQ8005 - tristate "SEEQ8005 support (EXPERIMENTAL)" - depends on EXPERIMENTAL - ---help--- - This is a driver for the SEEQ 8005 network (Ethernet) card. If this - is for you, read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called seeq8005. - config SGISEEQ tristate "SGI Seeq ethernet controller support" depends on SGI_HAS_SEEQ diff --git a/drivers/net/ethernet/seeq/Makefile b/drivers/net/ethernet/seeq/Makefile index 3e258a5..0488e99 100644 --- a/drivers/net/ethernet/seeq/Makefile +++ b/drivers/net/ethernet/seeq/Makefile @@ -3,5 +3,4 @@ # obj-$(CONFIG_ARM_ETHER3) += ether3.o -obj-$(CONFIG_SEEQ8005) += seeq8005.o obj-$(CONFIG_SGISEEQ) += sgiseeq.o diff --git a/drivers/net/ethernet/seeq/seeq8005.c b/drivers/net/ethernet/seeq/seeq8005.c deleted file mode 100644 index d6e50de..0000000 --- a/drivers/net/ethernet/seeq/seeq8005.c +++ /dev/null @@ -1,749 +0,0 @@ -/* seeq8005.c: A network driver for linux. */ -/* - Based on skeleton.c, - Written 1993-94 by Donald Becker. - See the skeleton.c file for further copyright information. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as hamish@zot.apana.org.au - - This file is a network device driver for the SEEQ 8005 chipset and - the Linux operating system. - -*/ - -static const char version[] = - "seeq8005.c:v1.00 8/07/95 Hamish Coleman (hamish@zot.apana.org.au)\n"; - -/* - Sources: - SEEQ 8005 databook - - Version history: - 1.00 Public release. cosmetic changes (no warnings now) - 0.68 Turning per- packet,interrupt debug messages off - testing for release. - 0.67 timing problems/bad buffer reads seem to be fixed now - 0.63 *!@$ protocol=eth_type_trans -- now packets flow - 0.56 Send working - 0.48 Receive working -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/bitops.h> -#include <linux/jiffies.h> - -#include <asm/io.h> -#include <asm/dma.h> - -#include "seeq8005.h" - -/* First, a few definitions that the brave might change. */ -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int seeq8005_portlist[] __initdata = - { 0x300, 0x320, 0x340, 0x360, 0}; - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 1 -#endif -static unsigned int net_debug = NET_DEBUG; - -/* Information that need to be kept for each board. */ -struct net_local { - unsigned short receive_ptr; /* What address in packet memory do we expect a recv_pkt_header? */ - long open_time; /* Useless example local info. */ -}; - -/* The station (ethernet) address prefix, used for IDing the board. */ -#define SA_ADDR0 0x00 -#define SA_ADDR1 0x80 -#define SA_ADDR2 0x4b - -/* Index to functions, as function prototypes. */ - -static int seeq8005_probe1(struct net_device *dev, int ioaddr); -static int seeq8005_open(struct net_device *dev); -static void seeq8005_timeout(struct net_device *dev); -static netdev_tx_t seeq8005_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t seeq8005_interrupt(int irq, void *dev_id); -static void seeq8005_rx(struct net_device *dev); -static int seeq8005_close(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); - -/* Example routines you must write ;->. */ -#define tx_done(dev) (inw(SEEQ_STATUS) & SEEQSTAT_TX_ON) -static void hardware_send_packet(struct net_device *dev, char *buf, int length); -extern void seeq8005_init(struct net_device *dev, int startp); -static inline void wait_for_buffer(struct net_device *dev); - - -/* Check for a network adaptor of this type, and return '0' iff one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - */ - -static int io = 0x320; -static int irq = 10; - -struct net_device * __init seeq8005_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - unsigned *port; - int err = 0; - - if (!dev) - return ERR_PTR(-ENODEV); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - } - - if (io > 0x1ff) { /* Check a single specified location. */ - err = seeq8005_probe1(dev, io); - } else if (io != 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { - for (port = seeq8005_portlist; *port; port++) { - if (seeq8005_probe1(dev, *port) == 0) - break; - } - if (!*port) - err = -ENODEV; - } - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - release_region(dev->base_addr, SEEQ8005_IO_EXTENT); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static const struct net_device_ops seeq8005_netdev_ops = { - .ndo_open = seeq8005_open, - .ndo_stop = seeq8005_close, - .ndo_start_xmit = seeq8005_send_packet, - .ndo_tx_timeout = seeq8005_timeout, - .ndo_set_rx_mode = set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/* This is the real probe routine. Linux has a history of friendly device - probes on the ISA bus. A good device probes avoids doing writes, and - verifies that the correct device exists and functions. */ - -static int __init seeq8005_probe1(struct net_device *dev, int ioaddr) -{ - static unsigned version_printed; - int i,j; - unsigned char SA_prom[32]; - int old_cfg1; - int old_cfg2; - int old_stat; - int old_dmaar; - int old_rear; - int retval; - - if (!request_region(ioaddr, SEEQ8005_IO_EXTENT, "seeq8005")) - return -ENODEV; - - if (net_debug>1) - printk("seeq8005: probing at 0x%x\n",ioaddr); - - old_stat = inw(SEEQ_STATUS); /* read status register */ - if (old_stat == 0xffff) { - retval = -ENODEV; - goto out; /* assume that 0xffff == no device */ - } - if ( (old_stat & 0x1800) != 0x1800 ) { /* assume that unused bits are 1, as my manual says */ - if (net_debug>1) { - printk("seeq8005: reserved stat bits != 0x1800\n"); - printk(" == 0x%04x\n",old_stat); - } - retval = -ENODEV; - goto out; - } - - old_rear = inw(SEEQ_REA); - if (old_rear == 0xffff) { - outw(0,SEEQ_REA); - if (inw(SEEQ_REA) == 0xffff) { /* assume that 0xffff == no device */ - retval = -ENODEV; - goto out; - } - } else if ((old_rear & 0xff00) != 0xff00) { /* assume that unused bits are 1 */ - if (net_debug>1) { - printk("seeq8005: unused rear bits != 0xff00\n"); - printk(" == 0x%04x\n",old_rear); - } - retval = -ENODEV; - goto out; - } - - old_cfg2 = inw(SEEQ_CFG2); /* read CFG2 register */ - old_cfg1 = inw(SEEQ_CFG1); - old_dmaar = inw(SEEQ_DMAAR); - - if (net_debug>4) { - printk("seeq8005: stat = 0x%04x\n",old_stat); - printk("seeq8005: cfg1 = 0x%04x\n",old_cfg1); - printk("seeq8005: cfg2 = 0x%04x\n",old_cfg2); - printk("seeq8005: raer = 0x%04x\n",old_rear); - printk("seeq8005: dmaar= 0x%04x\n",old_dmaar); - } - - outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); /* setup for reading PROM */ - outw( 0, SEEQ_DMAAR); /* set starting PROM address */ - outw( SEEQCFG1_BUFFER_PROM, SEEQ_CFG1); /* set buffer to look at PROM */ - - - j=0; - for(i=0; i <32; i++) { - j+= SA_prom[i] = inw(SEEQ_BUFFER) & 0xff; - } - -#if 0 - /* untested because I only have the one card */ - if ( (j&0xff) != 0 ) { /* checksum appears to be 8bit = 0 */ - if (net_debug>1) { /* check this before deciding that we have a card */ - printk("seeq8005: prom sum error\n"); - } - outw( old_stat, SEEQ_STATUS); - outw( old_dmaar, SEEQ_DMAAR); - outw( old_cfg1, SEEQ_CFG1); - retval = -ENODEV; - goto out; - } -#endif - - outw( SEEQCFG2_RESET, SEEQ_CFG2); /* reset the card */ - udelay(5); - outw( SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - - if (net_debug) { - printk("seeq8005: prom sum = 0x%08x\n",j); - for(j=0; j<32; j+=16) { - printk("seeq8005: prom %02x: ",j); - for(i=0;i<16;i++) { - printk("%02x ",SA_prom[j|i]); - } - printk(" "); - for(i=0;i<16;i++) { - if ((SA_prom[j|i]>31)&&(SA_prom[j|i]<127)) { - printk("%c", SA_prom[j|i]); - } else { - printk(" "); - } - } - printk("\n"); - } - } - -#if 0 - /* - * testing the packet buffer memory doesn't work yet - * but all other buffer accesses do - * - fixing is not a priority - */ - if (net_debug>1) { /* test packet buffer memory */ - printk("seeq8005: testing packet buffer ... "); - outw( SEEQCFG1_BUFFER_BUFFER, SEEQ_CFG1); - outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - outw( 0 , SEEQ_DMAAR); - for(i=0;i<32768;i++) { - outw(0x5a5a, SEEQ_BUFFER); - } - j=jiffies+HZ; - while ( ((inw(SEEQ_STATUS) & SEEQSTAT_FIFO_EMPTY) != SEEQSTAT_FIFO_EMPTY) && time_before(jiffies, j) ) - mb(); - outw( 0 , SEEQ_DMAAR); - while ( ((inw(SEEQ_STATUS) & SEEQSTAT_WINDOW_INT) != SEEQSTAT_WINDOW_INT) && time_before(jiffies, j+HZ)) - mb(); - if ( (inw(SEEQ_STATUS) & SEEQSTAT_WINDOW_INT) == SEEQSTAT_WINDOW_INT) - outw( SEEQCMD_WINDOW_INT_ACK | (inw(SEEQ_STATUS)& SEEQCMD_INT_MASK), SEEQ_CMD); - outw( SEEQCMD_FIFO_READ | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - j=0; - for(i=0;i<32768;i++) { - if (inw(SEEQ_BUFFER) != 0x5a5a) - j++; - } - if (j) { - printk("%i\n",j); - } else { - printk("ok.\n"); - } - } -#endif - - if (net_debug && version_printed++ == 0) - printk(version); - - printk("%s: %s found at %#3x, ", dev->name, "seeq8005", ioaddr); - - /* Fill in the 'dev' fields. */ - dev->base_addr = ioaddr; - dev->irq = irq; - - /* Retrieve and print the ethernet address. */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = SA_prom[i+6]; - printk("%pM", dev->dev_addr); - - if (dev->irq == 0xff) - ; /* Do nothing: a user-level program will set it. */ - else if (dev->irq < 2) { /* "Auto-IRQ" */ - unsigned long cookie = probe_irq_on(); - - outw( SEEQCMD_RX_INT_EN | SEEQCMD_SET_RX_ON | SEEQCMD_SET_RX_OFF, SEEQ_CMD ); - - dev->irq = probe_irq_off(cookie); - - if (net_debug >= 2) - printk(" autoirq is %d\n", dev->irq); - } else if (dev->irq == 2) - /* Fixup for users that don't know that IRQ 2 is really IRQ 9, - * or don't know which one to set. - */ - dev->irq = 9; - -#if 0 - { - int irqval = request_irq(dev->irq, seeq8005_interrupt, 0, "seeq8005", dev); - if (irqval) { - printk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name, - dev->irq, irqval); - retval = -EAGAIN; - goto out; - } - } -#endif - dev->netdev_ops = &seeq8005_netdev_ops; - dev->watchdog_timeo = HZ/20; - dev->flags &= ~IFF_MULTICAST; - - return 0; -out: - release_region(ioaddr, SEEQ8005_IO_EXTENT); - return retval; -} - - -/* Open/initialize the board. This is called (in the current kernel) - sometime after booting when the 'ifconfig' program is run. - - This routine should set everything up anew at each open, even - registers that "should" only need to be set once at boot, so that - there is non-reboot way to recover if something goes wrong. - */ -static int seeq8005_open(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - - { - int irqval = request_irq(dev->irq, seeq8005_interrupt, 0, "seeq8005", dev); - if (irqval) { - printk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name, - dev->irq, irqval); - return -EAGAIN; - } - } - - /* Reset the hardware here. Don't forget to set the station address. */ - seeq8005_init(dev, 1); - - lp->open_time = jiffies; - - netif_start_queue(dev); - return 0; -} - -static void seeq8005_timeout(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name, - tx_done(dev) ? "IRQ conflict" : "network cable problem"); - /* Try to restart the adaptor. */ - seeq8005_init(dev, 1); - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); -} - -static netdev_tx_t seeq8005_send_packet(struct sk_buff *skb, - struct net_device *dev) -{ - short length = skb->len; - unsigned char *buf; - - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - buf = skb->data; - - /* Block a timer-based transmit from overlapping */ - netif_stop_queue(dev); - - hardware_send_packet(dev, buf, length); - dev->stats.tx_bytes += length; - dev_kfree_skb (skb); - /* You might need to clean up and record Tx statistics here. */ - - return NETDEV_TX_OK; -} - -/* - * wait_for_buffer - * - * This routine waits for the SEEQ chip to assert that the FIFO is ready - * by checking for a window interrupt, and then clearing it. This has to - * occur in the interrupt handler! - */ -inline void wait_for_buffer(struct net_device * dev) -{ - int ioaddr = dev->base_addr; - unsigned long tmp; - int status; - - tmp = jiffies + HZ; - while ( ( ((status=inw(SEEQ_STATUS)) & SEEQSTAT_WINDOW_INT) != SEEQSTAT_WINDOW_INT) && time_before(jiffies, tmp)) - cpu_relax(); - - if ( (status & SEEQSTAT_WINDOW_INT) == SEEQSTAT_WINDOW_INT) - outw( SEEQCMD_WINDOW_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); -} - -/* The typical workload of the driver: - Handle the network interface interrupts. */ -static irqreturn_t seeq8005_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr, status, boguscount = 0; - int handled = 0; - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - - status = inw(SEEQ_STATUS); - do { - if (net_debug >2) { - printk("%s: int, status=0x%04x\n",dev->name,status); - } - - if (status & SEEQSTAT_WINDOW_INT) { - handled = 1; - outw( SEEQCMD_WINDOW_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - if (net_debug) { - printk("%s: window int!\n",dev->name); - } - } - if (status & SEEQSTAT_TX_INT) { - handled = 1; - outw( SEEQCMD_TX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - dev->stats.tx_packets++; - netif_wake_queue(dev); /* Inform upper layers. */ - } - if (status & SEEQSTAT_RX_INT) { - handled = 1; - /* Got a packet(s). */ - seeq8005_rx(dev); - } - status = inw(SEEQ_STATUS); - } while ( (++boguscount < 10) && (status & SEEQSTAT_ANY_INT)) ; - - if(net_debug>2) { - printk("%s: eoi\n",dev->name); - } - return IRQ_RETVAL(handled); -} - -/* We have a good packet(s), get it/them out of the buffers. */ -static void seeq8005_rx(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int boguscount = 10; - int pkt_hdr; - int ioaddr = dev->base_addr; - - do { - int next_packet; - int pkt_len; - int i; - int status; - - status = inw(SEEQ_STATUS); - outw( lp->receive_ptr, SEEQ_DMAAR); - outw(SEEQCMD_FIFO_READ | SEEQCMD_RX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - wait_for_buffer(dev); - next_packet = ntohs(inw(SEEQ_BUFFER)); - pkt_hdr = inw(SEEQ_BUFFER); - - if (net_debug>2) { - printk("%s: 0x%04x recv next=0x%04x, hdr=0x%04x\n",dev->name,lp->receive_ptr,next_packet,pkt_hdr); - } - - if ((next_packet == 0) || ((pkt_hdr & SEEQPKTH_CHAIN)==0)) { /* Read all the frames? */ - return; /* Done for now */ - } - - if ((pkt_hdr & SEEQPKTS_DONE)==0) - break; - - if (next_packet < lp->receive_ptr) { - pkt_len = (next_packet + 0x10000 - ((DEFAULT_TEA+1)<<8)) - lp->receive_ptr - 4; - } else { - pkt_len = next_packet - lp->receive_ptr - 4; - } - - if (next_packet < ((DEFAULT_TEA+1)<<8)) { /* is the next_packet address sane? */ - printk("%s: recv packet ring corrupt, resetting board\n",dev->name); - seeq8005_init(dev,1); - return; - } - - lp->receive_ptr = next_packet; - - if (net_debug>2) { - printk("%s: recv len=0x%04x\n",dev->name,pkt_len); - } - - if (pkt_hdr & SEEQPKTS_ANY_ERROR) { /* There was an error. */ - dev->stats.rx_errors++; - if (pkt_hdr & SEEQPKTS_SHORT) dev->stats.rx_frame_errors++; - if (pkt_hdr & SEEQPKTS_DRIB) dev->stats.rx_frame_errors++; - if (pkt_hdr & SEEQPKTS_OVERSIZE) dev->stats.rx_over_errors++; - if (pkt_hdr & SEEQPKTS_CRC_ERR) dev->stats.rx_crc_errors++; - /* skip over this packet */ - outw( SEEQCMD_FIFO_WRITE | SEEQCMD_DMA_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - outw( (lp->receive_ptr & 0xff00)>>8, SEEQ_REA); - } else { - /* Malloc up new buffer. */ - struct sk_buff *skb; - unsigned char *buf; - - skb = netdev_alloc_skb(dev, pkt_len); - if (skb == NULL) { - printk("%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - break; - } - skb_reserve(skb, 2); /* align data on 16 byte */ - buf = skb_put(skb,pkt_len); - - insw(SEEQ_BUFFER, buf, (pkt_len + 1) >> 1); - - if (net_debug>2) { - char * p = buf; - printk("%s: recv ",dev->name); - for(i=0;i<14;i++) { - printk("%02x ",*(p++)&0xff); - } - printk("\n"); - } - - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - } while ((--boguscount) && (pkt_hdr & SEEQPKTH_CHAIN)); - - /* If any worth-while packets have been received, netif_rx() - has done a mark_bh(NET_BH) for us and will work on them - when we get to the bottom-half routine. */ -} - -/* The inverse routine to net_open(). */ -static int seeq8005_close(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - lp->open_time = 0; - - netif_stop_queue(dev); - - /* Flush the Tx and disable Rx here. */ - outw( SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - - free_irq(dev->irq, dev); - - /* Update the statistics here. */ - - return 0; - -} - -/* Set or clear the multicast filter for this adaptor. - num_addrs == -1 Promiscuous mode, receive all packets - num_addrs == 0 Normal mode, clear multicast list - num_addrs > 0 Multicast mode, receive normal and MC packets, and do - best-effort filtering. - */ -static void set_multicast_list(struct net_device *dev) -{ -/* - * I _could_ do up to 6 addresses here, but won't (yet?) - */ - -#if 0 - int ioaddr = dev->base_addr; -/* - * hmm, not even sure if my matching works _anyway_ - seem to be receiving - * _everything_ . . . - */ - - if (num_addrs) { /* Enable promiscuous mode */ - outw( (inw(SEEQ_CFG1) & ~SEEQCFG1_MATCH_MASK)| SEEQCFG1_MATCH_ALL, SEEQ_CFG1); - dev->flags|=IFF_PROMISC; - } else { /* Disable promiscuous mode, use normal mode */ - outw( (inw(SEEQ_CFG1) & ~SEEQCFG1_MATCH_MASK)| SEEQCFG1_MATCH_BROAD, SEEQ_CFG1); - } -#endif -} - -void seeq8005_init(struct net_device *dev, int startp) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - int i; - - outw(SEEQCFG2_RESET, SEEQ_CFG2); /* reset device */ - udelay(5); - - outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - outw( 0, SEEQ_DMAAR); /* load start address into both low and high byte */ -/* wait_for_buffer(dev); */ /* I think that you only need a wait for memory buffer */ - outw( SEEQCFG1_BUFFER_MAC0, SEEQ_CFG1); - - for(i=0;i<6;i++) { /* set Station address */ - outb(dev->dev_addr[i], SEEQ_BUFFER); - udelay(2); - } - - outw( SEEQCFG1_BUFFER_TEA, SEEQ_CFG1); /* set xmit end area pointer to 16K */ - outb( DEFAULT_TEA, SEEQ_BUFFER); /* this gives us 16K of send buffer and 48K of recv buffer */ - - lp->receive_ptr = (DEFAULT_TEA+1)<<8; /* so we can find our packet_header */ - outw( lp->receive_ptr, SEEQ_RPR); /* Receive Pointer Register is set to recv buffer memory */ - - outw( 0x00ff, SEEQ_REA); /* Receive Area End */ - - if (net_debug>4) { - printk("%s: SA0 = ",dev->name); - - outw( SEEQCMD_FIFO_READ | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - outw( 0, SEEQ_DMAAR); - outw( SEEQCFG1_BUFFER_MAC0, SEEQ_CFG1); - - for(i=0;i<6;i++) { - printk("%02x ",inb(SEEQ_BUFFER)); - } - printk("\n"); - } - - outw( SEEQCFG1_MAC0_EN | SEEQCFG1_MATCH_BROAD | SEEQCFG1_BUFFER_BUFFER, SEEQ_CFG1); - outw( SEEQCFG2_AUTO_REA | SEEQCFG2_CTRLO, SEEQ_CFG2); - outw( SEEQCMD_SET_RX_ON | SEEQCMD_TX_INT_EN | SEEQCMD_RX_INT_EN, SEEQ_CMD); - - if (net_debug>4) { - int old_cfg1; - old_cfg1 = inw(SEEQ_CFG1); - printk("%s: stat = 0x%04x\n",dev->name,inw(SEEQ_STATUS)); - printk("%s: cfg1 = 0x%04x\n",dev->name,old_cfg1); - printk("%s: cfg2 = 0x%04x\n",dev->name,inw(SEEQ_CFG2)); - printk("%s: raer = 0x%04x\n",dev->name,inw(SEEQ_REA)); - printk("%s: dmaar= 0x%04x\n",dev->name,inw(SEEQ_DMAAR)); - - } -} - - -static void hardware_send_packet(struct net_device * dev, char *buf, int length) -{ - int ioaddr = dev->base_addr; - int status = inw(SEEQ_STATUS); - int transmit_ptr = 0; - unsigned long tmp; - - if (net_debug>4) { - printk("%s: send 0x%04x\n",dev->name,length); - } - - /* Set FIFO to writemode and set packet-buffer address */ - outw( SEEQCMD_FIFO_WRITE | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - outw( transmit_ptr, SEEQ_DMAAR); - - /* output SEEQ Packet header barfage */ - outw( htons(length + 4), SEEQ_BUFFER); - outw( SEEQPKTH_XMIT | SEEQPKTH_DATA_FOLLOWS | SEEQPKTH_XMIT_INT_EN, SEEQ_BUFFER ); - - /* blat the buffer */ - outsw( SEEQ_BUFFER, buf, (length +1) >> 1); - /* paranoia !! */ - outw( 0, SEEQ_BUFFER); - outw( 0, SEEQ_BUFFER); - - /* set address of start of transmit chain */ - outw( transmit_ptr, SEEQ_TPR); - - /* drain FIFO */ - tmp = jiffies; - while ( (((status=inw(SEEQ_STATUS)) & SEEQSTAT_FIFO_EMPTY) == 0) && time_before(jiffies, tmp + HZ)) - mb(); - - /* doit ! */ - outw( SEEQCMD_WINDOW_INT_ACK | SEEQCMD_SET_TX_ON | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - -} - - -#ifdef MODULE - -static struct net_device *dev_seeq; -MODULE_LICENSE("GPL"); -module_param(io, int, 0); -module_param(irq, int, 0); -MODULE_PARM_DESC(io, "SEEQ 8005 I/O base address"); -MODULE_PARM_DESC(irq, "SEEQ 8005 IRQ number"); - -int __init init_module(void) -{ - dev_seeq = seeq8005_probe(-1); - return PTR_RET(dev_seeq); -} - -void __exit cleanup_module(void) -{ - unregister_netdev(dev_seeq); - release_region(dev_seeq->base_addr, SEEQ8005_IO_EXTENT); - free_netdev(dev_seeq); -} - -#endif /* MODULE */ diff --git a/drivers/net/ethernet/seeq/seeq8005.h b/drivers/net/ethernet/seeq/seeq8005.h deleted file mode 100644 index 5dfb009..0000000 --- a/drivers/net/ethernet/seeq/seeq8005.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * defines, etc for the seeq8005 - */ - -/* - * This file is distributed under GPL. - * - * This style and layout of this file is also copied - * from many of the other linux network device drivers. - */ - -/* The number of low I/O ports used by the ethercard. */ -#define SEEQ8005_IO_EXTENT 16 - -#define SEEQ_B (ioaddr) - -#define SEEQ_CMD (SEEQ_B) /* Write only */ -#define SEEQ_STATUS (SEEQ_B) /* Read only */ -#define SEEQ_CFG1 (SEEQ_B + 2) -#define SEEQ_CFG2 (SEEQ_B + 4) -#define SEEQ_REA (SEEQ_B + 6) /* Receive End Area Register */ -#define SEEQ_RPR (SEEQ_B + 10) /* Receive Pointer Register */ -#define SEEQ_TPR (SEEQ_B + 12) /* Transmit Pointer Register */ -#define SEEQ_DMAAR (SEEQ_B + 14) /* DMA Address Register */ -#define SEEQ_BUFFER (SEEQ_B + 8) /* Buffer Window Register */ - -#define DEFAULT_TEA (0x3f) - -#define SEEQCMD_DMA_INT_EN (0x0001) /* DMA Interrupt Enable */ -#define SEEQCMD_RX_INT_EN (0x0002) /* Receive Interrupt Enable */ -#define SEEQCMD_TX_INT_EN (0x0004) /* Transmit Interrupt Enable */ -#define SEEQCMD_WINDOW_INT_EN (0x0008) /* What the hell is this for?? */ -#define SEEQCMD_INT_MASK (0x000f) - -#define SEEQCMD_DMA_INT_ACK (0x0010) /* DMA ack */ -#define SEEQCMD_RX_INT_ACK (0x0020) -#define SEEQCMD_TX_INT_ACK (0x0040) -#define SEEQCMD_WINDOW_INT_ACK (0x0080) -#define SEEQCMD_ACK_ALL (0x00f0) - -#define SEEQCMD_SET_DMA_ON (0x0100) /* Enables DMA Request logic */ -#define SEEQCMD_SET_RX_ON (0x0200) /* Enables Packet RX */ -#define SEEQCMD_SET_TX_ON (0x0400) /* Starts TX run */ -#define SEEQCMD_SET_DMA_OFF (0x0800) -#define SEEQCMD_SET_RX_OFF (0x1000) -#define SEEQCMD_SET_TX_OFF (0x2000) -#define SEEQCMD_SET_ALL_OFF (0x3800) /* set all logic off */ - -#define SEEQCMD_FIFO_READ (0x4000) /* Set FIFO to read mode (read from Buffer) */ -#define SEEQCMD_FIFO_WRITE (0x8000) /* Set FIFO to write mode */ - -#define SEEQSTAT_DMA_INT_EN (0x0001) /* Status of interrupt enable */ -#define SEEQSTAT_RX_INT_EN (0x0002) -#define SEEQSTAT_TX_INT_EN (0x0004) -#define SEEQSTAT_WINDOW_INT_EN (0x0008) - -#define SEEQSTAT_DMA_INT (0x0010) /* Interrupt flagged */ -#define SEEQSTAT_RX_INT (0x0020) -#define SEEQSTAT_TX_INT (0x0040) -#define SEEQSTAT_WINDOW_INT (0x0080) -#define SEEQSTAT_ANY_INT (0x00f0) - -#define SEEQSTAT_DMA_ON (0x0100) /* DMA logic on */ -#define SEEQSTAT_RX_ON (0x0200) /* Packet RX on */ -#define SEEQSTAT_TX_ON (0x0400) /* TX running */ - -#define SEEQSTAT_FIFO_FULL (0x2000) -#define SEEQSTAT_FIFO_EMPTY (0x4000) -#define SEEQSTAT_FIFO_DIR (0x8000) /* 1=read, 0=write */ - -#define SEEQCFG1_BUFFER_MASK (0x000f) /* define what maps into the BUFFER register */ -#define SEEQCFG1_BUFFER_MAC0 (0x0000) /* MAC station addresses 0-5 */ -#define SEEQCFG1_BUFFER_MAC1 (0x0001) -#define SEEQCFG1_BUFFER_MAC2 (0x0002) -#define SEEQCFG1_BUFFER_MAC3 (0x0003) -#define SEEQCFG1_BUFFER_MAC4 (0x0004) -#define SEEQCFG1_BUFFER_MAC5 (0x0005) -#define SEEQCFG1_BUFFER_PROM (0x0006) /* The Address/CFG PROM */ -#define SEEQCFG1_BUFFER_TEA (0x0007) /* Transmit end area */ -#define SEEQCFG1_BUFFER_BUFFER (0x0008) /* Packet buffer memory */ -#define SEEQCFG1_BUFFER_INT_VEC (0x0009) /* Interrupt Vector */ - -#define SEEQCFG1_DMA_INTVL_MASK (0x0030) -#define SEEQCFG1_DMA_CONT (0x0000) -#define SEEQCFG1_DMA_800ns (0x0010) -#define SEEQCFG1_DMA_1600ns (0x0020) -#define SEEQCFG1_DMA_3200ns (0x0030) - -#define SEEQCFG1_DMA_LEN_MASK (0x00c0) -#define SEEQCFG1_DMA_LEN1 (0x0000) -#define SEEQCFG1_DMA_LEN2 (0x0040) -#define SEEQCFG1_DMA_LEN4 (0x0080) -#define SEEQCFG1_DMA_LEN8 (0x00c0) - -#define SEEQCFG1_MAC_MASK (0x3f00) /* Dis/enable bits for MAC addresses */ -#define SEEQCFG1_MAC0_EN (0x0100) -#define SEEQCFG1_MAC1_EN (0x0200) -#define SEEQCFG1_MAC2_EN (0x0400) -#define SEEQCFG1_MAC3_EN (0x0800) -#define SEEQCFG1_MAC4_EN (0x1000) -#define SEEQCFG1_MAC5_EN (0x2000) - -#define SEEQCFG1_MATCH_MASK (0xc000) /* Packet matching logic cfg bits */ -#define SEEQCFG1_MATCH_SPECIFIC (0x0000) /* only matching MAC addresses */ -#define SEEQCFG1_MATCH_BROAD (0x4000) /* matching and broadcast addresses */ -#define SEEQCFG1_MATCH_MULTI (0x8000) /* matching, broadcast and multicast */ -#define SEEQCFG1_MATCH_ALL (0xc000) /* Promiscuous mode */ - -#define SEEQCFG1_DEFAULT (SEEQCFG1_BUFFER_BUFFER | SEEQCFG1_MAC0_EN | SEEQCFG1_MATCH_BROAD) - -#define SEEQCFG2_BYTE_SWAP (0x0001) /* 0=Intel byte-order */ -#define SEEQCFG2_AUTO_REA (0x0002) /* if set, Receive End Area will be updated when reading from Buffer */ - -#define SEEQCFG2_CRC_ERR_EN (0x0008) /* enables receiving of packets with CRC errors */ -#define SEEQCFG2_DRIBBLE_EN (0x0010) /* enables receiving of non-aligned packets */ -#define SEEQCFG2_SHORT_EN (0x0020) /* enables receiving of short packets */ - -#define SEEQCFG2_SLOTSEL (0x0040) /* 0= standard IEEE802.3, 1= smaller,faster, non-standard */ -#define SEEQCFG2_NO_PREAM (0x0080) /* 1= user supplies Xmit preamble bytes */ -#define SEEQCFG2_ADDR_LEN (0x0100) /* 1= 2byte addresses */ -#define SEEQCFG2_REC_CRC (0x0200) /* 0= received packets will have CRC stripped from them */ -#define SEEQCFG2_XMIT_NO_CRC (0x0400) /* don't xmit CRC with each packet (user supplies it) */ -#define SEEQCFG2_LOOPBACK (0x0800) -#define SEEQCFG2_CTRLO (0x1000) -#define SEEQCFG2_RESET (0x8000) /* software Hard-reset bit */ - -struct seeq_pkt_hdr { - unsigned short next; /* address of next packet header */ - unsigned char babble_int:1, /* enable int on >1514 byte packet */ - coll_int:1, /* enable int on collision */ - coll_16_int:1, /* enable int on >15 collision */ - xmit_int:1, /* enable int on success (or xmit with <15 collision) */ - unused:1, - data_follows:1, /* if not set, process this as a header and pointer only */ - chain_cont:1, /* if set, more headers in chain only cmd bit valid in recv header */ - xmit_recv:1; /* if set, a xmit packet, else a receive packet.*/ - unsigned char status; -}; - -#define SEEQPKTH_BAB_INT_EN (0x01) /* xmit only */ -#define SEEQPKTH_COL_INT_EN (0x02) /* xmit only */ -#define SEEQPKTH_COL16_INT_EN (0x04) /* xmit only */ -#define SEEQPKTH_XMIT_INT_EN (0x08) /* xmit only */ -#define SEEQPKTH_DATA_FOLLOWS (0x20) /* supposedly in xmit only */ -#define SEEQPKTH_CHAIN (0x40) /* more headers follow */ -#define SEEQPKTH_XMIT (0x80) - -#define SEEQPKTS_BABBLE (0x0100) /* xmit only */ -#define SEEQPKTS_OVERSIZE (0x0100) /* recv only */ -#define SEEQPKTS_COLLISION (0x0200) /* xmit only */ -#define SEEQPKTS_CRC_ERR (0x0200) /* recv only */ -#define SEEQPKTS_COLL16 (0x0400) /* xmit only */ -#define SEEQPKTS_DRIB (0x0400) /* recv only */ -#define SEEQPKTS_SHORT (0x0800) /* recv only */ -#define SEEQPKTS_DONE (0x8000) -#define SEEQPKTS_ANY_ERROR (0x0f00) |