diff options
author | Paul Mackerras <paulus@samba.org> | 2006-03-27 23:22:10 (GMT) |
---|---|---|
committer | Paul Mackerras <paulus@samba.org> | 2006-03-27 23:22:10 (GMT) |
commit | 0a26b1364f14852bc9a51db0ca63c5250c775627 (patch) | |
tree | 83422473cb4bf4c450012cded06288a0dc6abedf /arch/ppc/kernel/setup.c | |
parent | ff2e6d7e27cf1f757ab0d97e1a9e46de47152a0e (diff) | |
download | linux-fsl-qoriq-0a26b1364f14852bc9a51db0ca63c5250c775627.tar.xz |
ppc: Remove CHRP, POWER3 and POWER4 support from arch/ppc
32-bit CHRP machines are now supported only in arch/powerpc, as are
all 64-bit PowerPC processors. This means that we don't use
Open Firmware on any platform in arch/ppc any more.
This makes PReP support a single-platform option like every other
platform support option in arch/ppc now, thus CONFIG_PPC_MULTIPLATFORM
is gone from arch/ppc. CONFIG_PPC_PREP is the option that selects
PReP support and is generally what has replaced
CONFIG_PPC_MULTIPLATFORM within arch/ppc.
_machine is all but dead now, being #defined to 0.
Updated Makefiles, comments and Kconfig options generally to reflect
these changes.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/ppc/kernel/setup.c')
-rw-r--r-- | arch/ppc/kernel/setup.c | 254 |
1 files changed, 7 insertions, 247 deletions
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 53e9dea..7eb91a2 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -1,5 +1,5 @@ /* - * Common prep/chrp boot and setup code. + * Common prep boot and setup code. */ #include <linux/config.h> @@ -72,17 +72,12 @@ unsigned long ISA_DMA_THRESHOLD; unsigned int DMA_MODE_READ; unsigned int DMA_MODE_WRITE; -#ifdef CONFIG_PPC_MULTIPLATFORM -int _machine = 0; -EXPORT_SYMBOL(_machine); - +#ifdef CONFIG_PPC_PREP extern void prep_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); -extern void chrp_init(unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, unsigned long r7); dev_t boot_dev; -#endif /* CONFIG_PPC_MULTIPLATFORM */ +#endif /* CONFIG_PPC_PREP */ int have_of; EXPORT_SYMBOL(have_of); @@ -319,72 +314,12 @@ early_init(int r3, int r4, int r5) identify_cpu(offset, 0); do_cpu_ftr_fixups(offset); -#if defined(CONFIG_PPC_OF) - reloc_got2(offset); - - /* - * don't do anything on prep - * for now, don't use bootinfo because it breaks yaboot 0.5 - * and assume that if we didn't find a magic number, we have OF - */ - if (*(unsigned long *)(0) != 0xdeadc0de) - phys = prom_init(r3, r4, (prom_entry)r5); - - reloc_got2(-offset); -#endif - return phys; } -#ifdef CONFIG_PPC_OF -/* - * Assume here that all clock rates are the same in a - * smp system. -- Cort - */ -int -of_show_percpuinfo(struct seq_file *m, int i) -{ - struct device_node *cpu_node; - u32 *fp; - int s; - - cpu_node = find_type_devices("cpu"); - if (!cpu_node) - return 0; - for (s = 0; s < i && cpu_node->next; s++) - cpu_node = cpu_node->next; - fp = (u32 *)get_property(cpu_node, "clock-frequency", NULL); - if (fp) - seq_printf(m, "clock\t\t: %dMHz\n", *fp / 1000000); - return 0; -} - -void __init -intuit_machine_type(void) -{ - char *model; - struct device_node *root; - - /* ask the OF info if we're a chrp or pmac */ - root = find_path_device("/"); - if (root != 0) { - /* assume pmac unless proven to be chrp -- Cort */ - _machine = _MACH_Pmac; - model = get_property(root, "device_type", NULL); - if (model && !strncmp("chrp", model, 4)) - _machine = _MACH_chrp; - else { - model = get_property(root, "model", NULL); - if (model && !strncmp(model, "IBM", 3)) - _machine = _MACH_chrp; - } - } -} -#endif - -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP /* - * The PPC_MULTIPLATFORM version of platform_init... + * The PPC_PREP version of platform_init... */ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, @@ -399,161 +334,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, parse_bootinfo(find_bootinfo()); - /* if we didn't get any bootinfo telling us what we are... */ - if (_machine == 0) { - /* prep boot loader tells us if we're prep or not */ - if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) ) - _machine = _MACH_prep; - } - -#ifdef CONFIG_PPC_PREP - /* not much more to do here, if prep */ - if (_machine == _MACH_prep) { - prep_init(r3, r4, r5, r6, r7); - return; - } -#endif - -#ifdef CONFIG_PPC_OF - have_of = 1; - - /* prom_init has already been called from __start */ - if (boot_infos) - relocate_nodes(); - - /* If we aren't PReP, we can find out if we're Pmac - * or CHRP with this. */ - if (_machine == 0) - intuit_machine_type(); - - /* finish_device_tree may need _machine defined. */ - finish_device_tree(); - - /* - * If we were booted via quik, r3 points to the physical - * address of the command-line parameters. - * If we were booted from an xcoff image (i.e. netbooted or - * booted from floppy), we get the command line from the - * bootargs property of the /chosen node. - * If an initial ramdisk is present, r3 and r4 - * are used for initrd_start and initrd_size, - * otherwise they contain 0xdeadbeef. - */ - if (r3 >= 0x4000 && r3 < 0x800000 && r4 == 0) { - strlcpy(cmd_line, (char *)r3 + KERNELBASE, - sizeof(cmd_line)); - } else if (boot_infos != 0) { - /* booted by BootX - check for ramdisk */ - if (boot_infos->kernelParamsOffset != 0) - strlcpy(cmd_line, (char *) boot_infos - + boot_infos->kernelParamsOffset, - sizeof(cmd_line)); -#ifdef CONFIG_BLK_DEV_INITRD - if (boot_infos->ramDisk) { - initrd_start = (unsigned long) boot_infos - + boot_infos->ramDisk; - initrd_end = initrd_start + boot_infos->ramDiskSize; - initrd_below_start_ok = 1; - } -#endif - } else { - struct device_node *chosen; - char *p; - -#ifdef CONFIG_BLK_DEV_INITRD - if (r3 && r4 && r4 != 0xdeadbeef) { - if (r3 < KERNELBASE) - r3 += KERNELBASE; - initrd_start = r3; - initrd_end = r3 + r4; - ROOT_DEV = Root_RAM0; - initrd_below_start_ok = 1; - } -#endif - chosen = find_devices("chosen"); - if (chosen != NULL) { - p = get_property(chosen, "bootargs", NULL); - if (p && *p) { - strlcpy(cmd_line, p, sizeof(cmd_line)); - } - } - } -#ifdef CONFIG_ADB - if (strstr(cmd_line, "adb_sync")) { - extern int __adb_probe_sync; - __adb_probe_sync = 1; - } -#endif /* CONFIG_ADB */ - - switch (_machine) { -#ifdef CONFIG_PPC_CHRP - case _MACH_chrp: - chrp_init(r3, r4, r5, r6, r7); - break; -#endif - } -#endif /* CONFIG_PPC_OF */ + prep_init(r3, r4, r5, r6, r7); } -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -#ifdef CONFIG_PPC_OF -#ifdef CONFIG_SERIAL_CORE_CONSOLE -extern char *of_stdout_device; - -static int __init set_preferred_console(void) -{ - struct device_node *prom_stdout; - char *name; - int offset = 0; - - if (of_stdout_device == NULL) - return -ENODEV; - - /* The user has requested a console so this is already set up. */ - if (strstr(saved_command_line, "console=")) - return -EBUSY; - - prom_stdout = find_path_device(of_stdout_device); - if (!prom_stdout) - return -ENODEV; - - name = (char *)get_property(prom_stdout, "name", NULL); - if (!name) - return -ENODEV; - - if (strcmp(name, "serial") == 0) { - int i; - u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i); - if (i > 8) { - switch (reg[1]) { - case 0x3f8: - offset = 0; - break; - case 0x2f8: - offset = 1; - break; - case 0x898: - offset = 2; - break; - case 0x890: - offset = 3; - break; - default: - /* We dont recognise the serial port */ - return -ENODEV; - } - } - } else if (strcmp(name, "ch-a") == 0) - offset = 0; - else if (strcmp(name, "ch-b") == 0) - offset = 1; - else - return -ENODEV; - return add_preferred_console("ttyS", offset, NULL); -} -console_initcall(set_preferred_console); -#endif /* CONFIG_SERIAL_CORE_CONSOLE */ -#endif /* CONFIG_PPC_OF */ +#endif /* CONFIG_PPC_PREP */ struct bi_record *find_bootinfo(void) { @@ -589,23 +372,6 @@ void parse_bootinfo(struct bi_record *rec) initrd_end = data[0] + data[1] + KERNELBASE; break; #endif /* CONFIG_BLK_DEV_INITRD */ -#ifdef CONFIG_PPC_MULTIPLATFORM - case BI_MACHTYPE: - /* Machine types changed with the merge. Since the - * bootinfo are now deprecated, we can just hard code - * the appropriate conversion here for when we are - * called with yaboot which passes us a machine type - * this way. - */ - switch(data[0]) { - case 1: _machine = _MACH_prep; break; - case 2: _machine = _MACH_Pmac; break; - case 4: _machine = _MACH_chrp; break; - default: - _machine = data[0]; - } - break; -#endif case BI_MEMSIZE: boot_mem_size = data[0]; break; @@ -631,9 +397,6 @@ machine_init(unsigned long r3, unsigned long r4, unsigned long r5, #ifdef CONFIG_6xx ppc_md.power_save = ppc6xx_idle; #endif -#ifdef CONFIG_POWER4 - ppc_md.power_save = power4_idle; -#endif platform_init(r3, r4, r5, r6, r7); @@ -799,7 +562,4 @@ void __init setup_arch(char **cmdline_p) if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab); paging_init(); - - /* this is for modules since _machine can be a define -- Cort */ - ppc_md.ppc_machine = _machine; } |