diff options
author | Linus Walleij <linus.walleij@stericsson.com> | 2010-08-04 11:37:45 (GMT) |
---|---|---|
committer | Dan Williams <dan.j.williams@intel.com> | 2010-08-04 21:14:05 (GMT) |
commit | 95e1400fa1317e566b316ff4af947bd5341332c8 (patch) | |
tree | a2bdcd9729209f75eca11bc5b49b1b681a66c150 /drivers/dma/ste_dma40.c | |
parent | c156d0a5b0c667999e06d0bb52e3d1376faec8bf (diff) | |
download | linux-fsl-qoriq-95e1400fa1317e566b316ff4af947bd5341332c8.tar.xz |
DMAENGINE: add runtime slave config to DMA40 v3
This extends the DMA engine driver for the DMA40 used in the
U8500 platform with the generic runtime slave configuration
interface.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Diffstat (limited to 'drivers/dma/ste_dma40.c')
-rw-r--r-- | drivers/dma/ste_dma40.c | 141 |
1 files changed, 137 insertions, 4 deletions
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 21a7597..17e2600 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -208,6 +208,9 @@ struct d40_chan { struct d40_def_lcsp log_def; struct d40_lcla_elem lcla; struct d40_log_lli_full *lcpa; + /* Runtime reconfiguration */ + dma_addr_t runtime_addr; + enum dma_data_direction runtime_direction; }; /** @@ -1886,9 +1889,16 @@ static int d40_prep_slave_sg_log(struct d40_desc *d40d, d40d->lli_tx_len = 1; if (direction == DMA_FROM_DEVICE) - dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type]; + if (d40c->runtime_addr) + dev_addr = d40c->runtime_addr; + else + dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type]; else if (direction == DMA_TO_DEVICE) - dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type]; + if (d40c->runtime_addr) + dev_addr = d40c->runtime_addr; + else + dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type]; + else return -EINVAL; @@ -1931,9 +1941,15 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d, if (direction == DMA_FROM_DEVICE) { dst_dev_addr = 0; - src_dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type]; + if (d40c->runtime_addr) + src_dev_addr = d40c->runtime_addr; + else + src_dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type]; } else if (direction == DMA_TO_DEVICE) { - dst_dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type]; + if (d40c->runtime_addr) + dst_dev_addr = d40c->runtime_addr; + else + dst_dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type]; src_dev_addr = 0; } else return -EINVAL; @@ -2070,6 +2086,117 @@ static void d40_issue_pending(struct dma_chan *chan) spin_unlock_irqrestore(&d40c->lock, flags); } +/* Runtime reconfiguration extension */ +static void d40_set_runtime_config(struct dma_chan *chan, + struct dma_slave_config *config) +{ + struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); + struct stedma40_chan_cfg *cfg = &d40c->dma_cfg; + enum dma_slave_buswidth config_addr_width; + dma_addr_t config_addr; + u32 config_maxburst; + enum stedma40_periph_data_width addr_width; + int psize; + + if (config->direction == DMA_FROM_DEVICE) { + dma_addr_t dev_addr_rx = + d40c->base->plat_data->dev_rx[cfg->src_dev_type]; + + config_addr = config->src_addr; + if (dev_addr_rx) + dev_dbg(d40c->base->dev, + "channel has a pre-wired RX address %08x " + "overriding with %08x\n", + dev_addr_rx, config_addr); + if (cfg->dir != STEDMA40_PERIPH_TO_MEM) + dev_dbg(d40c->base->dev, + "channel was not configured for peripheral " + "to memory transfer (%d) overriding\n", + cfg->dir); + cfg->dir = STEDMA40_PERIPH_TO_MEM; + + config_addr_width = config->src_addr_width; + config_maxburst = config->src_maxburst; + + } else if (config->direction == DMA_TO_DEVICE) { + dma_addr_t dev_addr_tx = + d40c->base->plat_data->dev_tx[cfg->dst_dev_type]; + + config_addr = config->dst_addr; + if (dev_addr_tx) + dev_dbg(d40c->base->dev, + "channel has a pre-wired TX address %08x " + "overriding with %08x\n", + dev_addr_tx, config_addr); + if (cfg->dir != STEDMA40_MEM_TO_PERIPH) + dev_dbg(d40c->base->dev, + "channel was not configured for memory " + "to peripheral transfer (%d) overriding\n", + cfg->dir); + cfg->dir = STEDMA40_MEM_TO_PERIPH; + + config_addr_width = config->dst_addr_width; + config_maxburst = config->dst_maxburst; + + } else { + dev_err(d40c->base->dev, + "unrecognized channel direction %d\n", + config->direction); + return; + } + + switch (config_addr_width) { + case DMA_SLAVE_BUSWIDTH_1_BYTE: + addr_width = STEDMA40_BYTE_WIDTH; + break; + case DMA_SLAVE_BUSWIDTH_2_BYTES: + addr_width = STEDMA40_HALFWORD_WIDTH; + break; + case DMA_SLAVE_BUSWIDTH_4_BYTES: + addr_width = STEDMA40_WORD_WIDTH; + break; + case DMA_SLAVE_BUSWIDTH_8_BYTES: + addr_width = STEDMA40_DOUBLEWORD_WIDTH; + break; + default: + dev_err(d40c->base->dev, + "illegal peripheral address width " + "requested (%d)\n", + config->src_addr_width); + return; + } + + if (config_maxburst >= 16) + psize = STEDMA40_PSIZE_LOG_16; + else if (config_maxburst >= 8) + psize = STEDMA40_PSIZE_LOG_8; + else if (config_maxburst >= 4) + psize = STEDMA40_PSIZE_LOG_4; + else + psize = STEDMA40_PSIZE_LOG_1; + + /* Set up all the endpoint configs */ + cfg->src_info.data_width = addr_width; + cfg->src_info.psize = psize; + cfg->src_info.endianess = STEDMA40_LITTLE_ENDIAN; + cfg->src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL; + cfg->dst_info.data_width = addr_width; + cfg->dst_info.psize = psize; + cfg->dst_info.endianess = STEDMA40_LITTLE_ENDIAN; + cfg->dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL; + + /* These settings will take precedence later */ + d40c->runtime_addr = config_addr; + d40c->runtime_direction = config->direction; + dev_dbg(d40c->base->dev, + "configured channel %s for %s, data width %d, " + "maxburst %d bytes, LE, no flow control\n", + dma_chan_name(chan), + (config->direction == DMA_FROM_DEVICE) ? "RX" : "TX", + config_addr_width, + config_maxburst); +} + static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg) { @@ -2092,6 +2219,12 @@ static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, return d40_pause(chan); case DMA_RESUME: return d40_resume(chan); + case DMA_SLAVE_CONFIG: + d40_set_runtime_config(chan, + (struct dma_slave_config *) arg); + return 0; + default: + break; } /* Other commands are unimplemented */ |