diff options
author | Bruce Allan <bruce.w.allan@intel.com> | 2013-03-20 07:23:11 (GMT) |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2013-03-28 07:01:52 (GMT) |
commit | d495bcb84d2c3abb5ad5e43cfeea0e305ceffb30 (patch) | |
tree | 6edb94fb74a39dee627bbaeb39b3d21df84acc29 /drivers/net/ethernet | |
parent | ea8179a72844b30d046cdcc932231872f2dbcc90 (diff) | |
download | linux-fsl-qoriq-d495bcb84d2c3abb5ad5e43cfeea0e305ceffb30.tar.xz |
e1000e: EEE capability advertisement not set/disabled as required
Devices supported by the driver which support EEE (currently 82579, I217
and I218) are advertising EEE capabilities during auto-negotiation even
when EEE has been disabled. In addition to not acting as expected, this
also caused the EEE status reported by 'ethtool --show-eee' to be wrong
when two of these devices are connected back-to-back and EEE is disabled
on one. In addition to fixing this issue, the ability for the user to
specify which speeds (100 or 1000 full-duplex) to advertise EEE support
has been added.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/e1000.h | 3 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/ethtool.c | 63 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 55 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.h | 3 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 36 |
5 files changed, 88 insertions, 72 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index e371f77..82f1c84 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -46,6 +46,7 @@ #include <linux/ptp_clock_kernel.h> #include <linux/ptp_classify.h> #include <linux/mii.h> +#include <linux/mdio.h> #include "hw.h" struct e1000_info; @@ -350,6 +351,8 @@ struct e1000_adapter { struct timecounter tc; struct ptp_clock *ptp_clock; struct ptp_clock_info ptp_clock_info; + + u16 eee_advert; }; struct e1000_info { diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index e835e7b..7c8ca65 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -35,7 +35,6 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/vmalloc.h> -#include <linux/mdio.h> #include <linux/pm_runtime.h> #include "e1000.h" @@ -2076,23 +2075,20 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u16 cap_addr, adv_addr, lpa_addr, pcs_stat_addr, phy_data, lpi_ctrl; - u32 status, ret_val; + u16 cap_addr, lpa_addr, pcs_stat_addr, phy_data; + u32 ret_val; - if (!(adapter->flags & FLAG_IS_ICH) || - !(adapter->flags2 & FLAG2_HAS_EEE)) + if (!(adapter->flags2 & FLAG2_HAS_EEE)) return -EOPNOTSUPP; switch (hw->phy.type) { case e1000_phy_82579: cap_addr = I82579_EEE_CAPABILITY; - adv_addr = I82579_EEE_ADVERTISEMENT; lpa_addr = I82579_EEE_LP_ABILITY; pcs_stat_addr = I82579_EEE_PCS_STATUS; break; case e1000_phy_i217: cap_addr = I217_EEE_CAPABILITY; - adv_addr = I217_EEE_ADVERTISEMENT; lpa_addr = I217_EEE_LP_ABILITY; pcs_stat_addr = I217_EEE_PCS_STATUS; break; @@ -2111,10 +2107,7 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata) edata->supported = mmd_eee_cap_to_ethtool_sup_t(phy_data); /* EEE Advertised */ - ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &phy_data); - if (ret_val) - goto release; - edata->advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + edata->advertised = mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert); /* EEE Link Partner Advertised */ ret_val = e1000_read_emi_reg_locked(hw, lpa_addr, &phy_data); @@ -2132,25 +2125,11 @@ release: if (ret_val) return -ENODATA; - e1e_rphy(hw, I82579_LPI_CTRL, &lpi_ctrl); - status = er32(STATUS); - /* Result of the EEE auto negotiation - there is no register that * has the status of the EEE negotiation so do a best-guess based - * on whether both Tx and Rx LPI indications have been received or - * base it on the link speed, the EEE advertised speeds on both ends - * and the speeds on which EEE is enabled locally. + * on whether Tx or Rx LPI indications have been received. */ - if (((phy_data & E1000_EEE_TX_LPI_RCVD) && - (phy_data & E1000_EEE_RX_LPI_RCVD)) || - ((status & E1000_STATUS_SPEED_100) && - (edata->advertised & ADVERTISED_100baseT_Full) && - (edata->lp_advertised & ADVERTISED_100baseT_Full) && - (lpi_ctrl & I82579_LPI_CTRL_100_ENABLE)) || - ((status & E1000_STATUS_SPEED_1000) && - (edata->advertised & ADVERTISED_1000baseT_Full) && - (edata->lp_advertised & ADVERTISED_1000baseT_Full) && - (lpi_ctrl & I82579_LPI_CTRL_1000_ENABLE))) + if (phy_data & (E1000_EEE_TX_LPI_RCVD | E1000_EEE_RX_LPI_RCVD)) edata->eee_active = true; edata->eee_enabled = !hw->dev_spec.ich8lan.eee_disable; @@ -2167,19 +2146,10 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata) struct ethtool_eee eee_curr; s32 ret_val; - if (!(adapter->flags & FLAG_IS_ICH) || - !(adapter->flags2 & FLAG2_HAS_EEE)) - return -EOPNOTSUPP; - ret_val = e1000e_get_eee(netdev, &eee_curr); if (ret_val) return ret_val; - if (eee_curr.advertised != edata->advertised) { - e_err("Setting EEE advertisement is not supported\n"); - return -EINVAL; - } - if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) { e_err("Setting EEE tx-lpi is not supported\n"); return -EINVAL; @@ -2190,16 +2160,21 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata) return -EINVAL; } - if (hw->dev_spec.ich8lan.eee_disable != !edata->eee_enabled) { - hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled; - - /* reset the link */ - if (netif_running(netdev)) - e1000e_reinit_locked(adapter); - else - e1000e_reset(adapter); + if (edata->advertised & ~(ADVERTISE_100_FULL | ADVERTISE_1000_FULL)) { + e_err("EEE advertisement supports only 100TX and/or 1000T full-duplex\n"); + return -EINVAL; } + adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised); + + hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled; + + /* reset the link */ + if (netif_running(netdev)) + e1000e_reinit_locked(adapter); + else + e1000e_reset(adapter); + return 0; } diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 3b1c1a7..174507c 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -695,7 +695,7 @@ s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data) * * Assumes the SW/FW/HW Semaphore is already acquired. **/ -static s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data) +s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data) { return __e1000_access_emi_reg_locked(hw, addr, &data, false); } @@ -712,11 +712,22 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) { struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; s32 ret_val; - u16 lpi_ctrl; + u16 lpa, pcs_status, adv, adv_addr, lpi_ctrl, data; - if ((hw->phy.type != e1000_phy_82579) && - (hw->phy.type != e1000_phy_i217)) + switch (hw->phy.type) { + case e1000_phy_82579: + lpa = I82579_EEE_LP_ABILITY; + pcs_status = I82579_EEE_PCS_STATUS; + adv_addr = I82579_EEE_ADVERTISEMENT; + break; + case e1000_phy_i217: + lpa = I217_EEE_LP_ABILITY; + pcs_status = I217_EEE_PCS_STATUS; + adv_addr = I217_EEE_ADVERTISEMENT; + break; + default: return 0; + } ret_val = hw->phy.ops.acquire(hw); if (ret_val) @@ -731,34 +742,24 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) /* Enable EEE if not disabled by user */ if (!dev_spec->eee_disable) { - u16 lpa, pcs_status, data; - /* Save off link partner's EEE ability */ - switch (hw->phy.type) { - case e1000_phy_82579: - lpa = I82579_EEE_LP_ABILITY; - pcs_status = I82579_EEE_PCS_STATUS; - break; - case e1000_phy_i217: - lpa = I217_EEE_LP_ABILITY; - pcs_status = I217_EEE_PCS_STATUS; - break; - default: - ret_val = -E1000_ERR_PHY; - goto release; - } ret_val = e1000_read_emi_reg_locked(hw, lpa, &dev_spec->eee_lp_ability); if (ret_val) goto release; + /* Read EEE advertisement */ + ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &adv); + if (ret_val) + goto release; + /* Enable EEE only for speeds in which the link partner is - * EEE capable. + * EEE capable and for which we advertise EEE. */ - if (dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED) + if (adv & dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED) lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE; - if (dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) { + if (adv & dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) { e1e_rphy_locked(hw, MII_LPA, &data); if (data & LPA_100FULL) lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE; @@ -770,13 +771,13 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) dev_spec->eee_lp_ability &= ~I82579_EEE_100_SUPPORTED; } - - /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */ - ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data); - if (ret_val) - goto release; } + /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */ + ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data); + if (ret_val) + goto release; + ret_val = e1e_wphy_locked(hw, I82579_LPI_CTRL, lpi_ctrl); release: hw->phy.ops.release(hw); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index 00ba6c9..21d21b9 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -212,7 +212,7 @@ #define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */ #define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ #define I82579_RX_CONFIG 0x3412 /* Receive configuration */ -#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */ +#define I82579_EEE_PCS_STATUS 0x182E /* IEEE MMD Register 3.1 >> 8 */ #define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */ #define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */ #define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */ @@ -268,4 +268,5 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable); void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw); s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable); s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data); +s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data); #endif /* _E1000E_ICH8LAN_H_ */ diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 142ca39..0459fe3 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3875,6 +3875,38 @@ void e1000e_reset(struct e1000_adapter *adapter) /* initialize systim and reset the ns time counter */ e1000e_config_hwtstamp(adapter); + /* Set EEE advertisement as appropriate */ + if (adapter->flags2 & FLAG2_HAS_EEE) { + s32 ret_val; + u16 adv_addr; + + switch (hw->phy.type) { + case e1000_phy_82579: + adv_addr = I82579_EEE_ADVERTISEMENT; + break; + case e1000_phy_i217: + adv_addr = I217_EEE_ADVERTISEMENT; + break; + default: + dev_err(&adapter->pdev->dev, + "Invalid PHY type setting EEE advertisement\n"); + return; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) { + dev_err(&adapter->pdev->dev, + "EEE advertisement - unable to acquire PHY\n"); + return; + } + + e1000_write_emi_reg_locked(hw, adv_addr, + hw->dev_spec.ich8lan.eee_disable ? + 0 : adapter->eee_advert); + + hw->phy.ops.release(hw); + } + if (!netif_running(adapter->netdev) && !test_bit(__E1000_TESTING, &adapter->state)) { e1000_power_down_phy(adapter); @@ -6540,6 +6572,10 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_flashmap; } + /* Set default EEE advertisement */ + if (adapter->flags2 & FLAG2_HAS_EEE) + adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T; + /* construct the net_device struct */ netdev->netdev_ops = &e1000e_netdev_ops; e1000e_set_ethtool_ops(netdev); |