diff options
author | Greg Rose <gregory.v.rose@intel.com> | 2011-01-26 01:06:07 (GMT) |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-02-24 10:36:34 (GMT) |
commit | e9f9807262083a663829d0154b3da10bafb713bb (patch) | |
tree | 91a8403be54716972ad23fb3a4d11013ffeb5c3a /drivers/net/ixgbe/ixgbe_main.c | |
parent | 55ae22d08fc9b531bc8a88b7306004e7053bb425 (diff) | |
download | linux-fsl-qoriq-e9f9807262083a663829d0154b3da10bafb713bb.tar.xz |
ixgbe: Enable Jumbo Frames on the X540 10Gigabit Controller
The X540 controller supports jumbo frames in SR-IOV mode. Allow
configuration of jumbo frames either in the PF driver or on behalf of
a VF.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_main.c')
-rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 18 |
1 files changed, 16 insertions, 2 deletions
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index eca762d..f0d0c5a 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3077,6 +3077,14 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter, ixgbe_configure_srrctl(adapter, ring); ixgbe_configure_rscctl(adapter, ring); + /* If operating in IOV mode set RLPML for X540 */ + if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && + hw->mac.type == ixgbe_mac_X540) { + rxdctl &= ~IXGBE_RXDCTL_RLPMLMASK; + rxdctl |= ((ring->netdev->mtu + ETH_HLEN + + ETH_FCS_LEN + VLAN_HLEN) | IXGBE_RXDCTL_RLPML_EN); + } + if (hw->mac.type == ixgbe_mac_82598EB) { /* * enable cache line friendly hardware writes: @@ -5441,8 +5449,14 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; /* MTU < 68 is an error and causes problems on some kernels */ - if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) - return -EINVAL; + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED && + hw->mac.type != ixgbe_mac_X540) { + if ((new_mtu < 68) || (max_frame > MAXIMUM_ETHERNET_VLAN_SIZE)) + return -EINVAL; + } else { + if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) + return -EINVAL; + } e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); /* must set new MTU before calling down or up */ |