diff options
author | Guo-Fu Tseng <cooldavid@cooldavid.org> | 2011-02-13 18:27:35 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2011-02-14 04:43:20 (GMT) |
commit | 4872b11fdbbf78665230b2bb5864b1611dcb4a25 (patch) | |
tree | daa51591b2f7f2b515a549d98ed92d61f66475fb /drivers/net | |
parent | 19d96017d1b5b1c9b709bc21a398ea793256644c (diff) | |
download | linux-fsl-qoriq-4872b11fdbbf78665230b2bb5864b1611dcb4a25.tar.xz |
jme: PHY Power control for new chip
After main chip rev 5, the hardware support more power saving
control registers.
Some Non-Linux drivers might turn off the phy power with new
interfaces, this patch makes it possible for Linux to turn it
on again.
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/jme.c | 68 | ||||
-rw-r--r-- | drivers/net/jme.h | 52 |
2 files changed, 106 insertions, 14 deletions
diff --git a/drivers/net/jme.c b/drivers/net/jme.c index d44716e..d446fdb 100644 --- a/drivers/net/jme.c +++ b/drivers/net/jme.c @@ -1577,6 +1577,38 @@ jme_free_irq(struct jme_adapter *jme) } static inline void +jme_new_phy_on(struct jme_adapter *jme) +{ + u32 reg; + + reg = jread32(jme, JME_PHY_PWR); + reg &= ~(PHY_PWR_DWN1SEL | PHY_PWR_DWN1SW | + PHY_PWR_DWN2 | PHY_PWR_CLKSEL); + jwrite32(jme, JME_PHY_PWR, reg); + + pci_read_config_dword(jme->pdev, PCI_PRIV_PE1, ®); + reg &= ~PE1_GPREG0_PBG; + reg |= PE1_GPREG0_ENBG; + pci_write_config_dword(jme->pdev, PCI_PRIV_PE1, reg); +} + +static inline void +jme_new_phy_off(struct jme_adapter *jme) +{ + u32 reg; + + reg = jread32(jme, JME_PHY_PWR); + reg |= PHY_PWR_DWN1SEL | PHY_PWR_DWN1SW | + PHY_PWR_DWN2 | PHY_PWR_CLKSEL; + jwrite32(jme, JME_PHY_PWR, reg); + + pci_read_config_dword(jme->pdev, PCI_PRIV_PE1, ®); + reg &= ~PE1_GPREG0_PBG; + reg |= PE1_GPREG0_PDD3COLD; + pci_write_config_dword(jme->pdev, PCI_PRIV_PE1, reg); +} + +static inline void jme_phy_on(struct jme_adapter *jme) { u32 bmcr; @@ -1584,6 +1616,22 @@ jme_phy_on(struct jme_adapter *jme) bmcr = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_BMCR); bmcr &= ~BMCR_PDOWN; jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_BMCR, bmcr); + + if (new_phy_power_ctrl(jme->chip_main_rev)) + jme_new_phy_on(jme); +} + +static inline void +jme_phy_off(struct jme_adapter *jme) +{ + u32 bmcr; + + bmcr = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_BMCR); + bmcr |= BMCR_PDOWN; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_BMCR, bmcr); + + if (new_phy_power_ctrl(jme->chip_main_rev)) + jme_new_phy_off(jme); } static int @@ -1606,12 +1654,11 @@ jme_open(struct net_device *netdev) jme_start_irq(jme); - if (test_bit(JME_FLAG_SSET, &jme->flags)) { - jme_phy_on(jme); + jme_phy_on(jme); + if (test_bit(JME_FLAG_SSET, &jme->flags)) jme_set_settings(netdev, &jme->old_ecmd); - } else { + else jme_reset_phy_processor(jme); - } jme_reset_link(jme); @@ -1657,12 +1704,6 @@ jme_wait_link(struct jme_adapter *jme) } } -static inline void -jme_phy_off(struct jme_adapter *jme) -{ - jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_BMCR, BMCR_PDOWN); -} - static void jme_powersave_phy(struct jme_adapter *jme) { @@ -3068,12 +3109,11 @@ jme_resume(struct pci_dev *pdev) jme_clear_pm(jme); pci_restore_state(pdev); - if (test_bit(JME_FLAG_SSET, &jme->flags)) { - jme_phy_on(jme); + jme_phy_on(jme); + if (test_bit(JME_FLAG_SSET, &jme->flags)) jme_set_settings(netdev, &jme->old_ecmd); - } else { + else jme_reset_phy_processor(jme); - } jme_start_irq(jme); netif_device_attach(netdev); diff --git a/drivers/net/jme.h b/drivers/net/jme.h index 32b2a9d..c3764fc 100644 --- a/drivers/net/jme.h +++ b/drivers/net/jme.h @@ -103,6 +103,37 @@ enum jme_spi_op_bits { #define HALF_US 500 /* 500 ns */ #define JMESPIIOCTL SIOCDEVPRIVATE +#define PCI_PRIV_PE1 0xE4 + +enum pci_priv_pe1_bit_masks { + PE1_ASPMSUPRT = 0x00000003, /* + * RW: + * Aspm_support[1:0] + * (R/W Port of 5C[11:10]) + */ + PE1_MULTIFUN = 0x00000004, /* RW: Multi_fun_bit */ + PE1_RDYDMA = 0x00000008, /* RO: ~link.rdy_for_dma */ + PE1_ASPMOPTL = 0x00000030, /* RW: link.rx10s_option[1:0] */ + PE1_ASPMOPTH = 0x000000C0, /* RW: 10_req=[3]?HW:[2] */ + PE1_GPREG0 = 0x0000FF00, /* + * SRW: + * Cfg_gp_reg0 + * [7:6] phy_giga BG control + * [5] CREQ_N as CREQ_N1 (CPPE# as CREQ#) + * [4:0] Reserved + */ + PE1_GPREG0_PBG = 0x0000C000, /* phy_giga BG control */ + PE1_GPREG1 = 0x00FF0000, /* RW: Cfg_gp_reg1 */ + PE1_REVID = 0xFF000000, /* RO: Rev ID */ +}; + +enum pci_priv_pe1_values { + PE1_GPREG0_ENBG = 0x00000000, /* en BG */ + PE1_GPREG0_PDD3COLD = 0x00004000, /* giga_PD + d3cold */ + PE1_GPREG0_PDPCIESD = 0x00008000, /* giga_PD + pcie_shutdown */ + PE1_GPREG0_PDPCIEIDDQ = 0x0000C000, /* giga_PD + pcie_iddq */ +}; + /* * Dynamic(adaptive)/Static PCC values */ @@ -499,6 +530,7 @@ enum jme_iomap_regs { JME_PMCS = JME_MAC | 0x60, /* Power Management Control/Stat */ + JME_PHY_PWR = JME_PHY | 0x24, /* New PHY Power Ctrl Register */ JME_PHY_CS = JME_PHY | 0x28, /* PHY Ctrl and Status Register */ JME_PHY_LINK = JME_PHY | 0x30, /* PHY Link Status Register */ JME_SMBCSR = JME_PHY | 0x40, /* SMB Control and Status */ @@ -835,6 +867,21 @@ enum jme_pmcs_bit_masks { }; /* + * New PHY Power Control Register + */ +enum jme_phy_pwr_bit_masks { + PHY_PWR_DWN1SEL = 0x01000000, /* Phy_giga.p_PWR_DOWN1_SEL */ + PHY_PWR_DWN1SW = 0x02000000, /* Phy_giga.p_PWR_DOWN1_SW */ + PHY_PWR_DWN2 = 0x04000000, /* Phy_giga.p_PWR_DOWN2 */ + PHY_PWR_CLKSEL = 0x08000000, /* + * XTL_OUT Clock select + * (an internal free-running clock) + * 0: xtl_out = phy_giga.A_XTL25_O + * 1: xtl_out = phy_giga.PD_OSC + */ +}; + +/* * Giga PHY Status Registers */ enum jme_phy_link_bit_mask { @@ -1191,6 +1238,11 @@ static inline int is_buggy250(unsigned short device, u8 chiprev) return device == PCI_DEVICE_ID_JMICRON_JMC250 && chiprev == 0x11; } +static inline int new_phy_power_ctrl(u8 chip_main_rev) +{ + return chip_main_rev >= 5; +} + /* * Function prototypes */ |