diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-02-23 22:36:05 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-02-23 22:36:05 (GMT) |
commit | d38e84ee39783e00bd0b83a8dd19e54709950912 (patch) | |
tree | c98f6804c6fd7c32238602173a78b04210703042 /drivers/net | |
parent | 20f4d6c3a2a23c5d7d9cc7f42fbb943ca7a03d1f (diff) | |
parent | 486a87f1e5624096bd1c09e9e716239597d48dca (diff) | |
download | linux-fsl-qoriq-d38e84ee39783e00bd0b83a8dd19e54709950912.tar.xz |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
netns: fix double free at netns creation
veth : add the set_mac_address capability
sunlance: Beyond ARRAY_SIZE of ib->btx_ring
sungem: another error printed one too early
ISDN: fix sc/shmem printk format warning
SMSC: timeout reaches -1
smsc9420: handle magic field of ethtool_eeprom
sundance: missing parentheses?
smsc9420: fix another postfixed timeout
wimax/i2400m: driver loads firmware v1.4 instead of v1.3
vlan: Update skb->mac_header in __vlan_put_tag().
cxgb3: Add support for PCI ID 0x35.
tcp: remove obsoleted comment about different passes
TG3: &&/|| confusion
ATM: misplaced parentheses?
net/mv643xx: don't disable the mib timer too early and lock properly
net/mv643xx: use GFP_ATOMIC while atomic
atl1c: Atheros L1C Gigabit Ethernet driver
net: Kill skb_truesize_check(), it only catches false-positives.
net: forcedeth: Fix wake-on-lan regression
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/Kconfig | 11 | ||||
-rw-r--r-- | drivers/net/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/atl1c/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/atl1c/atl1c.h | 606 | ||||
-rw-r--r-- | drivers/net/atl1c/atl1c_ethtool.c | 317 | ||||
-rw-r--r-- | drivers/net/atl1c/atl1c_hw.c | 527 | ||||
-rw-r--r-- | drivers/net/atl1c/atl1c_hw.h | 859 | ||||
-rw-r--r-- | drivers/net/atl1c/atl1c_main.c | 2797 | ||||
-rw-r--r-- | drivers/net/cxgb3/cxgb3_main.c | 1 | ||||
-rw-r--r-- | drivers/net/cxgb3/t3_hw.c | 7 | ||||
-rw-r--r-- | drivers/net/forcedeth.c | 13 | ||||
-rw-r--r-- | drivers/net/mv643xx_eth.c | 9 | ||||
-rw-r--r-- | drivers/net/smsc911x.c | 2 | ||||
-rw-r--r-- | drivers/net/smsc9420.c | 6 | ||||
-rw-r--r-- | drivers/net/smsc9420.h | 1 | ||||
-rw-r--r-- | drivers/net/sundance.c | 2 | ||||
-rw-r--r-- | drivers/net/sungem.c | 2 | ||||
-rw-r--r-- | drivers/net/sunlance.c | 4 | ||||
-rw-r--r-- | drivers/net/tg3.c | 4 | ||||
-rw-r--r-- | drivers/net/veth.c | 9 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/i2400m.h | 2 |
21 files changed, 5163 insertions, 19 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 6bdfd47..a2f185f 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2342,6 +2342,17 @@ config ATL1E To compile this driver as a module, choose M here. The module will be called atl1e. +config ATL1C + tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + select MII + help + This driver supports the Atheros L1C gigabit ethernet adapter. + + To compile this driver as a module, choose M here. The module + will be called atl1c. + config JME tristate "JMicron(R) PCI-Express Gigabit Ethernet support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index a3c5c00..aca8492 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_ATL1) += atlx/ obj-$(CONFIG_ATL2) += atlx/ obj-$(CONFIG_ATL1E) += atl1e/ +obj-$(CONFIG_ATL1C) += atl1c/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o obj-$(CONFIG_TEHUTI) += tehuti.o obj-$(CONFIG_ENIC) += enic/ diff --git a/drivers/net/atl1c/Makefile b/drivers/net/atl1c/Makefile new file mode 100644 index 0000000..c37d966 --- /dev/null +++ b/drivers/net/atl1c/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ATL1C) += atl1c.o +atl1c-objs := atl1c_main.o atl1c_hw.o atl1c_ethtool.o diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/atl1c/atl1c.h new file mode 100644 index 0000000..ac11b84 --- /dev/null +++ b/drivers/net/atl1c/atl1c.h @@ -0,0 +1,606 @@ +/* + * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _ATL1C_H_ +#define _ATL1C_H_ + +#include <linux/version.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/ipv6.h> +#include <linux/udp.h> +#include <linux/mii.h> +#include <linux/io.h> +#include <linux/vmalloc.h> +#include <linux/pagemap.h> +#include <linux/tcp.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/if_vlan.h> +#include <linux/workqueue.h> +#include <net/checksum.h> +#include <net/ip6_checksum.h> + +#include "atl1c_hw.h" + +/* Wake Up Filter Control */ +#define AT_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define AT_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define AT_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define AT_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */ +#define AT_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ + +#define AT_VLAN_TO_TAG(_vlan, _tag) \ + _tag = ((((_vlan) >> 8) & 0xFF) |\ + (((_vlan) & 0xFF) << 8)) + +#define AT_TAG_TO_VLAN(_tag, _vlan) \ + _vlan = ((((_tag) >> 8) & 0xFF) |\ + (((_tag) & 0xFF) << 8)) + +#define SPEED_0 0xffff +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 + +#define AT_RX_BUF_SIZE (ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN) +#define MAX_JUMBO_FRAME_SIZE (9*1024) +#define MAX_TX_OFFLOAD_THRESH (9*1024) + +#define AT_MAX_RECEIVE_QUEUE 4 +#define AT_DEF_RECEIVE_QUEUE 1 +#define AT_MAX_TRANSMIT_QUEUE 2 + +#define AT_DMA_HI_ADDR_MASK 0xffffffff00000000ULL +#define AT_DMA_LO_ADDR_MASK 0x00000000ffffffffULL + +#define AT_TX_WATCHDOG (5 * HZ) +#define AT_MAX_INT_WORK 5 +#define AT_TWSI_EEPROM_TIMEOUT 100 +#define AT_HW_MAX_IDLE_DELAY 10 +#define AT_SUSPEND_LINK_TIMEOUT 28 + +#define AT_ASPM_L0S_TIMER 6 +#define AT_ASPM_L1_TIMER 12 + +#define ATL1C_PCIE_L0S_L1_DISABLE 0x01 +#define ATL1C_PCIE_PHY_RESET 0x02 + +#define ATL1C_ASPM_L0s_ENABLE 0x0001 +#define ATL1C_ASPM_L1_ENABLE 0x0002 + +#define AT_REGS_LEN (75 * sizeof(u32)) +#define AT_EEPROM_LEN 512 + +#define ATL1C_GET_DESC(R, i, type) (&(((type *)((R)->desc))[i])) +#define ATL1C_RFD_DESC(R, i) ATL1C_GET_DESC(R, i, struct atl1c_rx_free_desc) +#define ATL1C_TPD_DESC(R, i) ATL1C_GET_DESC(R, i, struct atl1c_tpd_desc) +#define ATL1C_RRD_DESC(R, i) ATL1C_GET_DESC(R, i, struct atl1c_recv_ret_status) + +/* tpd word 1 bit 0:7 General Checksum task offload */ +#define TPD_L4HDR_OFFSET_MASK 0x00FF +#define TPD_L4HDR_OFFSET_SHIFT 0 + +/* tpd word 1 bit 0:7 Large Send task offload (IPv4/IPV6) */ +#define TPD_TCPHDR_OFFSET_MASK 0x00FF +#define TPD_TCPHDR_OFFSET_SHIFT 0 + +/* tpd word 1 bit 0:7 Custom Checksum task offload */ +#define TPD_PLOADOFFSET_MASK 0x00FF +#define TPD_PLOADOFFSET_SHIFT 0 + +/* tpd word 1 bit 8:17 */ +#define TPD_CCSUM_EN_MASK 0x0001 +#define TPD_CCSUM_EN_SHIFT 8 +#define TPD_IP_CSUM_MASK 0x0001 +#define TPD_IP_CSUM_SHIFT 9 +#define TPD_TCP_CSUM_MASK 0x0001 +#define TPD_TCP_CSUM_SHIFT 10 +#define TPD_UDP_CSUM_MASK 0x0001 +#define TPD_UDP_CSUM_SHIFT 11 +#define TPD_LSO_EN_MASK 0x0001 /* TCP Large Send Offload */ +#define TPD_LSO_EN_SHIFT 12 +#define TPD_LSO_VER_MASK 0x0001 +#define TPD_LSO_VER_SHIFT 13 /* 0 : ipv4; 1 : ipv4/ipv6 */ +#define TPD_CON_VTAG_MASK 0x0001 +#define TPD_CON_VTAG_SHIFT 14 +#define TPD_INS_VTAG_MASK 0x0001 +#define TPD_INS_VTAG_SHIFT 15 +#define TPD_IPV4_PACKET_MASK 0x0001 /* valid when LSO VER is 1 */ +#define TPD_IPV4_PACKET_SHIFT 16 +#define TPD_ETH_TYPE_MASK 0x0001 +#define TPD_ETH_TYPE_SHIFT 17 /* 0 : 802.3 frame; 1 : Ethernet */ + +/* tpd word 18:25 Custom Checksum task offload */ +#define TPD_CCSUM_OFFSET_MASK 0x00FF +#define TPD_CCSUM_OFFSET_SHIFT 18 +#define TPD_CCSUM_EPAD_MASK 0x0001 +#define TPD_CCSUM_EPAD_SHIFT 30 + +/* tpd word 18:30 Large Send task offload (IPv4/IPV6) */ +#define TPD_MSS_MASK 0x1FFF +#define TPD_MSS_SHIFT 18 + +#define TPD_EOP_MASK 0x0001 +#define TPD_EOP_SHIFT 31 + +struct atl1c_tpd_desc { + __le16 buffer_len; /* include 4-byte CRC */ + __le16 vlan_tag; + __le32 word1; + __le64 buffer_addr; +}; + +struct atl1c_tpd_ext_desc { + u32 reservd_0; + __le32 word1; + __le32 pkt_len; + u32 reservd_1; +}; +/* rrs word 0 bit 0:31 */ +#define RRS_RX_CSUM_MASK 0xFFFF +#define RRS_RX_CSUM_SHIFT 0 +#define RRS_RX_RFD_CNT_MASK 0x000F +#define RRS_RX_RFD_CNT_SHIFT 16 +#define RRS_RX_RFD_INDEX_MASK 0x0FFF +#define RRS_RX_RFD_INDEX_SHIFT 20 + +/* rrs flag bit 0:16 */ +#define RRS_HEAD_LEN_MASK 0x00FF +#define RRS_HEAD_LEN_SHIFT 0 +#define RRS_HDS_TYPE_MASK 0x0003 +#define RRS_HDS_TYPE_SHIFT 8 +#define RRS_CPU_NUM_MASK 0x0003 +#define RRS_CPU_NUM_SHIFT 10 +#define RRS_HASH_FLG_MASK 0x000F +#define RRS_HASH_FLG_SHIFT 12 + +#define RRS_HDS_TYPE_HEAD 1 +#define RRS_HDS_TYPE_DATA 2 + +#define RRS_IS_NO_HDS_TYPE(flag) \ + (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == 0) + +#define RRS_IS_HDS_HEAD(flag) \ + (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \ + RRS_HDS_TYPE_HEAD) + +#define RRS_IS_HDS_DATA(flag) \ + (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \ + RRS_HDS_TYPE_DATA) + +/* rrs word 3 bit 0:31 */ +#define RRS_PKT_SIZE_MASK 0x3FFF +#define RRS_PKT_SIZE_SHIFT 0 +#define RRS_ERR_L4_CSUM_MASK 0x0001 +#define RRS_ERR_L4_CSUM_SHIFT 14 +#define RRS_ERR_IP_CSUM_MASK 0x0001 +#define RRS_ERR_IP_CSUM_SHIFT 15 +#define RRS_VLAN_INS_MASK 0x0001 +#define RRS_VLAN_INS_SHIFT 16 +#define RRS_PROT_ID_MASK 0x0007 +#define RRS_PROT_ID_SHIFT 17 +#define RRS_RX_ERR_SUM_MASK 0x0001 +#define RRS_RX_ERR_SUM_SHIFT 20 +#define RRS_RX_ERR_CRC_MASK 0x0001 +#define RRS_RX_ERR_CRC_SHIFT 21 +#define RRS_RX_ERR_FAE_MASK 0x0001 +#define RRS_RX_ERR_FAE_SHIFT 22 +#define RRS_RX_ERR_TRUNC_MASK 0x0001 +#define RRS_RX_ERR_TRUNC_SHIFT 23 +#define RRS_RX_ERR_RUNC_MASK 0x0001 +#define RRS_RX_ERR_RUNC_SHIFT 24 +#define RRS_RX_ERR_ICMP_MASK 0x0001 +#define RRS_RX_ERR_ICMP_SHIFT 25 +#define RRS_PACKET_BCAST_MASK 0x0001 +#define RRS_PACKET_BCAST_SHIFT 26 +#define RRS_PACKET_MCAST_MASK 0x0001 +#define RRS_PACKET_MCAST_SHIFT 27 +#define RRS_PACKET_TYPE_MASK 0x0001 +#define RRS_PACKET_TYPE_SHIFT 28 +#define RRS_FIFO_FULL_MASK 0x0001 +#define RRS_FIFO_FULL_SHIFT 29 +#define RRS_802_3_LEN_ERR_MASK 0x0001 +#define RRS_802_3_LEN_ERR_SHIFT 30 +#define RRS_RXD_UPDATED_MASK 0x0001 +#define RRS_RXD_UPDATED_SHIFT 31 + +#define RRS_ERR_L4_CSUM 0x00004000 +#define RRS_ERR_IP_CSUM 0x00008000 +#define RRS_VLAN_INS 0x00010000 +#define RRS_RX_ERR_SUM 0x00100000 +#define RRS_RX_ERR_CRC 0x00200000 +#define RRS_802_3_LEN_ERR 0x40000000 +#define RRS_RXD_UPDATED 0x80000000 + +#define RRS_PACKET_TYPE_802_3 1 +#define RRS_PACKET_TYPE_ETH 0 +#define RRS_PACKET_IS_ETH(word) \ + (((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK == \ + RRS_PACKET_TYPE_ETH) +#define RRS_RXD_IS_VALID(word) \ + ((((word) >> RRS_RXD_UPDATED_SHIFT) & RRS_RXD_UPDATED_MASK) == 1) + +#define RRS_PACKET_PROT_IS_IPV4_ONLY(word) \ + ((((word) >> RRS_PROT_ID_SHIFT) & RRS_PROT_ID_MASK) == 1) +#define RRS_PACKET_PROT_IS_IPV6_ONLY(word) \ + ((((word) >> RRS_PROT_ID_SHIFT) & RRS_PROT_ID_MASK) == 6) + +struct atl1c_recv_ret_status { + __le32 word0; + __le32 rss_hash; + __le16 vlan_tag; + __le16 flag; + __le32 word3; +}; + +/* RFD desciptor */ +struct atl1c_rx_free_desc { + __le64 buffer_addr; +}; + +/* DMA Order Settings */ +enum atl1c_dma_order { + atl1c_dma_ord_in = 1, + atl1c_dma_ord_enh = 2, + atl1c_dma_ord_out = 4 +}; + +enum atl1c_dma_rcb { + atl1c_rcb_64 = 0, + atl1c_rcb_128 = 1 +}; + +enum atl1c_mac_speed { + atl1c_mac_speed_0 = 0, + atl1c_mac_speed_10_100 = 1, + atl1c_mac_speed_1000 = 2 +}; + +enum atl1c_dma_req_block { + atl1c_dma_req_128 = 0, + atl1c_dma_req_256 = 1, + atl1c_dma_req_512 = 2, + atl1c_dma_req_1024 = 3, + atl1c_dma_req_2048 = 4, + atl1c_dma_req_4096 = 5 +}; + +enum atl1c_rss_mode { + atl1c_rss_mode_disable = 0, + atl1c_rss_sig_que = 1, + atl1c_rss_mul_que_sig_int = 2, + atl1c_rss_mul_que_mul_int = 4, +}; + +enum atl1c_rss_type { + atl1c_rss_disable = 0, + atl1c_rss_ipv4 = 1, + atl1c_rss_ipv4_tcp = 2, + atl1c_rss_ipv6 = 4, + atl1c_rss_ipv6_tcp = 8 +}; + +enum atl1c_nic_type { + athr_l1c = 0, + athr_l2c = 1, +}; + +enum atl1c_trans_queue { + atl1c_trans_normal = 0, + atl1c_trans_high = 1 +}; + +struct atl1c_hw_stats { + /* rx */ + unsigned long rx_ok; /* The number of good packet received. */ + unsigned long rx_bcast; /* The number of good broadcast packet received. */ + unsigned long rx_mcast; /* The number of good multicast packet received. */ + unsigned long rx_pause; /* The number of Pause packet received. */ + unsigned long rx_ctrl; /* The number of Control packet received other than Pause frame. */ + unsigned long rx_fcs_err; /* The number of packets with bad FCS. */ + unsigned long rx_len_err; /* The number of packets with mismatch of length field and actual size. */ + unsigned long rx_byte_cnt; /* The number of bytes of good packet received. FCS is NOT included. */ + unsigned long rx_runt; /* The number of packets received that are less than 64 byte long and with good FCS. */ + unsigned long rx_frag; /* The number of packets received that are less than 64 byte long and with bad FCS. */ + unsigned long rx_sz_64; /* The number of good and bad packets received that are 64 byte long. */ + unsigned long rx_sz_65_127; /* The number of good and bad packets received that are between 65 and 127-byte long. */ + unsigned long rx_sz_128_255; /* The number of good and bad packets received that are between 128 and 255-byte long. */ + unsigned long rx_sz_256_511; /* The number of good and bad packets received that are between 256 and 511-byte long. */ + unsigned long rx_sz_512_1023; /* The number of good and bad packets received that are between 512 and 1023-byte long. */ + unsigned long rx_sz_1024_1518; /* The number of good and bad packets received that are between 1024 and 1518-byte long. */ + unsigned long rx_sz_1519_max; /* The number of good and bad packets received that are between 1519-byte and MTU. */ + unsigned long rx_sz_ov; /* The number of good and bad packets received that are more than MTU size truncated by Selene. */ + unsigned long rx_rxf_ov; /* The number of frame dropped due to occurrence of RX FIFO overflow. */ + unsigned long rx_rrd_ov; /* The number of frame dropped due to occurrence of RRD overflow. */ + unsigned long rx_align_err; /* Alignment Error */ + unsigned long rx_bcast_byte_cnt; /* The byte count of broadcast packet received, excluding FCS. */ + unsigned long rx_mcast_byte_cnt; /* The byte count of multicast packet received, excluding FCS. */ + unsigned long rx_err_addr; /* The number of packets dropped due to address filtering. */ + + /* tx */ + unsigned long tx_ok; /* The number of good packet transmitted. */ + unsigned long tx_bcast; /* The number of good broadcast packet transmitted. */ + unsigned long tx_mcast; /* The number of good multicast packet transmitted. */ + unsigned long tx_pause; /* The number of Pause packet transmitted. */ + unsigned long tx_exc_defer; /* The number of packets transmitted with excessive deferral. */ + unsigned long tx_ctrl; /* The number of packets transmitted is a control frame, excluding Pause frame. */ + unsigned long tx_defer; /* The number of packets transmitted that is deferred. */ + unsigned long tx_byte_cnt; /* The number of bytes of data transmitted. FCS is NOT included. */ + unsigned long tx_sz_64; /* The number of good and bad packets transmitted that are 64 byte long. */ + unsigned long tx_sz_65_127; /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */ + unsigned long tx_sz_128_255; /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */ + unsigned long tx_sz_256_511; /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */ + unsigned long tx_sz_512_1023; /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */ + unsigned long tx_sz_1024_1518; /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */ + unsigned long tx_sz_1519_max; /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */ + unsigned long tx_1_col; /* The number of packets subsequently transmitted successfully with a single prior collision. */ + unsigned long tx_2_col; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */ + unsigned long tx_late_col; /* The number of packets transmitted with late collisions. */ + unsigned long tx_abort_col; /* The number of transmit packets aborted due to excessive collisions. */ + unsigned long tx_underrun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */ + unsigned long tx_rd_eop; /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */ + unsigned long tx_len_err; /* The number of transmit packets with length field does NOT match the actual frame size. */ + unsigned long tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU. */ + unsigned long tx_bcast_byte; /* The byte count of broadcast packet transmitted, excluding FCS. */ + unsigned long tx_mcast_byte; /* The byte count of multicast packet transmitted, excluding FCS. */ +}; + +struct atl1c_hw { + u8 __iomem *hw_addr; /* inner register address */ + struct atl1c_adapter *adapter; + enum atl1c_nic_type nic_type; + enum atl1c_dma_order dma_order; + enum atl1c_dma_rcb rcb_value; + enum atl1c_dma_req_block dmar_block; + enum atl1c_dma_req_block dmaw_block; + + u16 device_id; + u16 vendor_id; + u16 subsystem_id; + u16 subsystem_vendor_id; + u8 revision_id; + + u32 intr_mask; + u8 dmaw_dly_cnt; + u8 dmar_dly_cnt; + + u8 preamble_len; + u16 max_frame_size; + u16 min_frame_size; + + enum atl1c_mac_speed mac_speed; + bool mac_duplex; + bool hibernate; + u16 media_type; +#define MEDIA_TYPE_AUTO_SENSOR 0 +#define MEDIA_TYPE_100M_FULL 1 +#define MEDIA_TYPE_100M_HALF 2 +#define MEDIA_TYPE_10M_FULL 3 +#define MEDIA_TYPE_10M_HALF 4 + + u16 autoneg_advertised; + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg; + + u16 tx_imt; /* TX Interrupt Moderator timer ( 2us resolution) */ + u16 rx_imt; /* RX Interrupt Moderator timer ( 2us resolution) */ + u16 ict; /* Interrupt Clear timer (2us resolution) */ + u16 ctrl_flags; +#define ATL1C_INTR_CLEAR_ON_READ 0x0001 +#define ATL1C_INTR_MODRT_ENABLE 0x0002 +#define ATL1C_CMB_ENABLE 0x0004 +#define ATL1C_SMB_ENABLE 0x0010 +#define ATL1C_TXQ_MODE_ENHANCE 0x0020 +#define ATL1C_RX_IPV6_CHKSUM 0x0040 +#define ATL1C_ASPM_L0S_SUPPORT 0x0080 +#define ATL1C_ASPM_L1_SUPPORT 0x0100 +#define ATL1C_ASPM_CTRL_MON 0x0200 +#define ATL1C_HIB_DISABLE 0x0400 +#define ATL1C_LINK_CAP_1000M 0x0800 +#define ATL1C_FPGA_VERSION 0x8000 + u16 cmb_tpd; + u16 cmb_rrd; + u16 cmb_rx_timer; /* 2us resolution */ + u16 cmb_tx_timer; + u32 smb_timer; + + u16 rrd_thresh; /* Threshold of number of RRD produced to trigger + interrupt request */ + u16 tpd_thresh; + u8 tpd_burst; /* Number of TPD to prefetch in cache-aligned burst. */ + u8 rfd_burst; + enum atl1c_rss_type rss_type; + enum atl1c_rss_mode rss_mode; + u8 rss_hash_bits; + u32 base_cpu; + u32 indirect_tab; + u8 mac_addr[ETH_ALEN]; + u8 perm_mac_addr[ETH_ALEN]; + + bool phy_configured; + bool re_autoneg; + bool emi_ca; +}; + +/* + * atl1c_ring_header represents a single, contiguous block of DMA space + * mapped for the three descriptor rings (tpd, rfd, rrd) and the two + * message blocks (cmb, smb) described below + */ +struct atl1c_ring_header { + void *desc; /* virtual address */ + dma_addr_t dma; /* physical address*/ + unsigned int size; /* length in bytes */ +}; + +/* + * atl1c_buffer is wrapper around a pointer to a socket buffer + * so a DMA handle can be stored along with the skb + */ +struct atl1c_buffer { + struct sk_buff *skb; /* socket buffer */ + u16 length; /* rx buffer length */ + u16 state; /* state of buffer */ +#define ATL1_BUFFER_FREE 0 +#define ATL1_BUFFER_BUSY 1 + dma_addr_t dma; +}; + +/* transimit packet descriptor (tpd) ring */ +struct atl1c_tpd_ring { + void *desc; /* descriptor ring virtual address */ + dma_addr_t dma; /* descriptor ring physical address */ + u16 size; /* descriptor ring length in bytes */ + u16 count; /* number of descriptors in the ring */ + u16 next_to_use; /* this is protectd by adapter->tx_lock */ + atomic_t next_to_clean; + struct atl1c_buffer *buffer_info; +}; + +/* receive free descriptor (rfd) ring */ +struct atl1c_rfd_ring { + void *desc; /* descriptor ring virtual address */ + dma_addr_t dma; /* descriptor ring physical address */ + u16 size; /* descriptor ring length in bytes */ + u16 count; /* number of descriptors in the ring */ + u16 next_to_use; + u16 next_to_clean; + struct atl1c_buffer *buffer_info; +}; + +/* receive return desciptor (rrd) ring */ +struct atl1c_rrd_ring { + void *desc; /* descriptor ring virtual address */ + dma_addr_t dma; /* descriptor ring physical address */ + u16 size; /* descriptor ring length in bytes */ + u16 count; /* number of descriptors in the ring */ + u16 next_to_use; + u16 next_to_clean; +}; + +struct atl1c_cmb { + void *cmb; + dma_addr_t dma; +}; + +struct atl1c_smb { + void *smb; + dma_addr_t dma; +}; + +/* board specific private data structure */ +struct atl1c_adapter { + struct net_device *netdev; + struct pci_dev *pdev; + struct vlan_group *vlgrp; + struct napi_struct napi; + struct atl1c_hw hw; + struct atl1c_hw_stats hw_stats; + struct net_device_stats net_stats; + struct mii_if_info mii; /* MII interface info */ + u16 rx_buffer_len; + + unsigned long flags; +#define __AT_TESTING 0x0001 +#define __AT_RESETTING 0x0002 +#define __AT_DOWN 0x0003 + u32 msg_enable; + + bool have_msi; + u32 wol; + u16 link_speed; + u16 link_duplex; + + spinlock_t mdio_lock; + spinlock_t tx_lock; + atomic_t irq_sem; + + struct work_struct reset_task; + struct work_struct link_chg_task; + struct timer_list watchdog_timer; + struct timer_list phy_config_timer; + + /* All Descriptor memory */ + struct atl1c_ring_header ring_header; + struct atl1c_tpd_ring tpd_ring[AT_MAX_TRANSMIT_QUEUE]; + struct atl1c_rfd_ring rfd_ring[AT_MAX_RECEIVE_QUEUE]; + struct atl1c_rrd_ring rrd_ring[AT_MAX_RECEIVE_QUEUE]; + struct atl1c_cmb cmb; + struct atl1c_smb smb; + int num_rx_queues; + u32 bd_number; /* board number;*/ +}; + +#define AT_WRITE_REG(a, reg, value) ( \ + writel((value), ((a)->hw_addr + reg))) + +#define AT_WRITE_FLUSH(a) (\ + readl((a)->hw_addr)) + +#define AT_READ_REG(a, reg, pdata) do { \ + if (unlikely((a)->hibernate)) { \ + readl((a)->hw_addr + reg); \ + *(u32 *)pdata = readl((a)->hw_addr + reg); \ + } else { \ + *(u32 *)pdata = readl((a)->hw_addr + reg); \ + } \ + } while (0) + +#define AT_WRITE_REGB(a, reg, value) (\ + writeb((value), ((a)->hw_addr + reg))) + +#define AT_READ_REGB(a, reg) (\ + readb((a)->hw_addr + reg)) + +#define AT_WRITE_REGW(a, reg, value) (\ + writew((value), ((a)->hw_addr + reg))) + +#define AT_READ_REGW(a, reg) (\ + readw((a)->hw_addr + reg)) + +#define AT_WRITE_REG_ARRAY(a, reg, offset, value) ( \ + writel((value), (((a)->hw_addr + reg) + ((offset) << 2)))) + +#define AT_READ_REG_ARRAY(a, reg, offset) ( \ + readl(((a)->hw_addr + reg) + ((offset) << 2))) + +extern char atl1c_driver_name[]; +extern char atl1c_driver_version[]; + +extern int atl1c_up(struct atl1c_adapter *adapter); +extern void atl1c_down(struct atl1c_adapter *adapter); +extern void atl1c_reinit_locked(struct atl1c_adapter *adapter); +extern s32 atl1c_reset_hw(struct atl1c_hw *hw); +extern void atl1c_set_ethtool_ops(struct net_device *netdev); +#endif /* _ATL1C_H_ */ diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c new file mode 100644 index 0000000..45c5b73 --- /dev/null +++ b/drivers/net/atl1c/atl1c_ethtool.c @@ -0,0 +1,317 @@ +/* + * Copyright(c) 2009 - 2009 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <linux/netdevice.h> +#include <linux/ethtool.h> + +#include "atl1c.h" + +static int atl1c_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_TP); + if (hw->ctrl_flags & ATL1C_LINK_CAP_1000M) + ecmd->supported |= SUPPORTED_1000baseT_Full; + + ecmd->advertising = ADVERTISED_TP; + + ecmd->advertising |= hw->autoneg_advertised; + + ecmd->port = PORT_TP; + ecmd->phy_address = 0; + ecmd->transceiver = XCVR_INTERNAL; + + if (adapter->link_speed != SPEED_0) { + ecmd->speed = adapter->link_speed; + if (adapter->link_duplex == FULL_DUPLEX) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + ecmd->autoneg = AUTONEG_ENABLE; + return 0; +} + +static int atl1c_set_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + u16 autoneg_advertised; + + while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) + msleep(1); + + if (ecmd->autoneg == AUTONEG_ENABLE) { + autoneg_advertised = ADVERTISED_Autoneg; + } else { + if (ecmd->speed == SPEED_1000) { + if (ecmd->duplex != DUPLEX_FULL) { + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, + "1000M half is invalid\n"); + clear_bit(__AT_RESETTING, &adapter->flags); + return -EINVAL; + } + autoneg_advertised = ADVERTISED_1000baseT_Full; + } else if (ecmd->speed == SPEED_100) { + if (ecmd->duplex == DUPLEX_FULL) + autoneg_advertised = ADVERTISED_100baseT_Full; + else + autoneg_advertised = ADVERTISED_100baseT_Half; + } else { + if (ecmd->duplex == DUPLEX_FULL) + autoneg_advertised = ADVERTISED_10baseT_Full; + else + autoneg_advertised = ADVERTISED_10baseT_Half; + } + } + + if (hw->autoneg_advertised != autoneg_advertised) { + hw->autoneg_advertised = autoneg_advertised; + if (atl1c_restart_autoneg(hw) != 0) { + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, + "ethtool speed/duplex setting failed\n"); + clear_bit(__AT_RESETTING, &adapter->flags); + return -EINVAL; + } + } + clear_bit(__AT_RESETTING, &adapter->flags); + return 0; +} + +static u32 atl1c_get_tx_csum(struct net_device *netdev) +{ + return (netdev->features & NETIF_F_HW_CSUM) != 0; +} + +static u32 atl1c_get_msglevel(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void atl1c_set_msglevel(struct net_device *netdev, u32 data) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = data; +} + +static int atl1c_get_regs_len(struct net_device *netdev) +{ + return AT_REGS_LEN; +} + +static void atl1c_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, void *p) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + u32 *regs_buff = p; + u16 phy_data; + + memset(p, 0, AT_REGS_LEN); + + regs->version = 0; + AT_READ_REG(hw, REG_VPD_CAP, p++); + AT_READ_REG(hw, REG_PM_CTRL, p++); + AT_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL, p++); + AT_READ_REG(hw, REG_TWSI_CTRL, p++); + AT_READ_REG(hw, REG_PCIE_DEV_MISC_CTRL, p++); + AT_READ_REG(hw, REG_MASTER_CTRL, p++); + AT_READ_REG(hw, REG_MANUAL_TIMER_INIT, p++); + AT_READ_REG(hw, REG_IRQ_MODRT_TIMER_INIT, p++); + AT_READ_REG(hw, REG_GPHY_CTRL, p++); + AT_READ_REG(hw, REG_LINK_CTRL, p++); + AT_READ_REG(hw, REG_IDLE_STATUS, p++); + AT_READ_REG(hw, REG_MDIO_CTRL, p++); + AT_READ_REG(hw, REG_SERDES_LOCK, p++); + AT_READ_REG(hw, REG_MAC_CTRL, p++); + AT_READ_REG(hw, REG_MAC_IPG_IFG, p++); + AT_READ_REG(hw, REG_MAC_STA_ADDR, p++); + AT_READ_REG(hw, REG_MAC_STA_ADDR+4, p++); + AT_READ_REG(hw, REG_RX_HASH_TABLE, p++); + AT_READ_REG(hw, REG_RX_HASH_TABLE+4, p++); + AT_READ_REG(hw, REG_RXQ_CTRL, p++); + AT_READ_REG(hw, REG_TXQ_CTRL, p++); + AT_READ_REG(hw, REG_MTU, p++); + AT_READ_REG(hw, REG_WOL_CTRL, p++); + + atl1c_read_phy_reg(hw, MII_BMCR, &phy_data); + regs_buff[73] = (u32) phy_data; + atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); + regs_buff[74] = (u32) phy_data; +} + +static int atl1c_get_eeprom_len(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + if (atl1c_check_eeprom_exist(&adapter->hw)) + return AT_EEPROM_LEN; + else + return 0; +} + +static int atl1c_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + u32 *eeprom_buff; + int first_dword, last_dword; + int ret_val = 0; + int i; + + if (eeprom->len == 0) + return -EINVAL; + + if (!atl1c_check_eeprom_exist(hw)) /* not exist */ + return -EINVAL; + + eeprom->magic = adapter->pdev->vendor | + (adapter->pdev->device << 16); + + first_dword = eeprom->offset >> 2; + last_dword = (eeprom->offset + eeprom->len - 1) >> 2; + + eeprom_buff = kmalloc(sizeof(u32) * + (last_dword - first_dword + 1), GFP_KERNEL); + if (eeprom_buff == NULL) + return -ENOMEM; + + for (i = first_dword; i < last_dword; i++) { + if (!atl1c_read_eeprom(hw, i * 4, &(eeprom_buff[i-first_dword]))) { + kfree(eeprom_buff); + return -EIO; + } + } + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3), + eeprom->len); + kfree(eeprom_buff); + + return ret_val; + return 0; +} + +static void atl1c_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + strncpy(drvinfo->driver, atl1c_driver_name, sizeof(drvinfo->driver)); + strncpy(drvinfo->version, atl1c_driver_version, + sizeof(drvinfo->version)); + strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strncpy(drvinfo->bus_info, pci_name(adapter->pdev), + sizeof(drvinfo->bus_info)); + drvinfo->n_stats = 0; + drvinfo->testinfo_len = 0; + drvinfo->regdump_len = atl1c_get_regs_len(netdev); + drvinfo->eedump_len = atl1c_get_eeprom_len(netdev); +} + +static void atl1c_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_MAGIC | WAKE_PHY; + wol->wolopts = 0; + + if (adapter->wol & AT_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & AT_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & AT_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & AT_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + if (adapter->wol & AT_WUFC_LNKC) + wol->wolopts |= WAKE_PHY; + + return; +} + +static int atl1c_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE | + WAKE_MCAST | WAKE_BCAST | WAKE_MCAST)) + return -EOPNOTSUPP; + /* these settings will always override what we currently have */ + adapter->wol = 0; + + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= AT_WUFC_MAG; + if (wol->wolopts & WAKE_PHY) + adapter->wol |= AT_WUFC_LNKC; + + return 0; +} + +static int atl1c_nway_reset(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + if (netif_running(netdev)) + atl1c_reinit_locked(adapter); + return 0; +} + +static struct ethtool_ops atl1c_ethtool_ops = { + .get_settings = atl1c_get_settings, + .set_settings = atl1c_set_settings, + .get_drvinfo = atl1c_get_drvinfo, + .get_regs_len = atl1c_get_regs_len, + .get_regs = atl1c_get_regs, + .get_wol = atl1c_get_wol, + .set_wol = atl1c_set_wol, + .get_msglevel = atl1c_get_msglevel, + .set_msglevel = atl1c_set_msglevel, + .nway_reset = atl1c_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = atl1c_get_eeprom_len, + .get_eeprom = atl1c_get_eeprom, + .get_tx_csum = atl1c_get_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, +}; + +void atl1c_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &atl1c_ethtool_ops); +} diff --git a/drivers/net/atl1c/atl1c_hw.c b/drivers/net/atl1c/atl1c_hw.c new file mode 100644 index 0000000..3e69b94 --- /dev/null +++ b/drivers/net/atl1c/atl1c_hw.c @@ -0,0 +1,527 @@ +/* + * Copyright(c) 2007 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/mii.h> +#include <linux/crc32.h> + +#include "atl1c.h" + +/* + * check_eeprom_exist + * return 1 if eeprom exist + */ +int atl1c_check_eeprom_exist(struct atl1c_hw *hw) +{ + u32 data; + + AT_READ_REG(hw, REG_TWSI_DEBUG, &data); + if (data & TWSI_DEBUG_DEV_EXIST) + return 1; + + return 0; +} + +void atl1c_hw_set_mac_addr(struct atl1c_hw *hw) +{ + u32 value; + /* + * 00-0B-6A-F6-00-DC + * 0: 6AF600DC 1: 000B + * low dword + */ + value = (((u32)hw->mac_addr[2]) << 24) | + (((u32)hw->mac_addr[3]) << 16) | + (((u32)hw->mac_addr[4]) << 8) | + (((u32)hw->mac_addr[5])) ; + AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value); + /* hight dword */ + value = (((u32)hw->mac_addr[0]) << 8) | + (((u32)hw->mac_addr[1])) ; + AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value); +} + +/* + * atl1c_get_permanent_address + * return 0 if get valid mac address, + */ +static int atl1c_get_permanent_address(struct atl1c_hw *hw) +{ + u32 addr[2]; + u32 i; + u32 otp_ctrl_data; + u32 twsi_ctrl_data; + u8 eth_addr[ETH_ALEN]; + + /* init */ + addr[0] = addr[1] = 0; + AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data); + if (atl1c_check_eeprom_exist(hw)) { + /* Enable OTP CLK */ + if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) { + otp_ctrl_data |= OTP_CTRL_CLK_EN; + AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); + AT_WRITE_FLUSH(hw); + msleep(1); + } + + AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data); + twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART; + AT_WRITE_REG(hw, REG_TWSI_CTRL, twsi_ctrl_data); + for (i = 0; i < AT_TWSI_EEPROM_TIMEOUT; i++) { + msleep(10); + AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data); + if ((twsi_ctrl_data & TWSI_CTRL_SW_LDSTART) == 0) + break; + } + if (i >= AT_TWSI_EEPROM_TIMEOUT) + return -1; + } + /* Disable OTP_CLK */ + if (otp_ctrl_data & OTP_CTRL_CLK_EN) { + otp_ctrl_data &= ~OTP_CTRL_CLK_EN; + AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); + AT_WRITE_FLUSH(hw); + msleep(1); + } + + /* maybe MAC-address is from BIOS */ + AT_READ_REG(hw, REG_MAC_STA_ADDR, &addr[0]); + AT_READ_REG(hw, REG_MAC_STA_ADDR + 4, &addr[1]); + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *)&addr[1]); + + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + + return -1; +} + +bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value) +{ + int i; + int ret = false; + u32 otp_ctrl_data; + u32 control; + u32 data; + + if (offset & 3) + return ret; /* address do not align */ + + AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data); + if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) + AT_WRITE_REG(hw, REG_OTP_CTRL, + (otp_ctrl_data | OTP_CTRL_CLK_EN)); + + AT_WRITE_REG(hw, REG_EEPROM_DATA_LO, 0); + control = (offset & EEPROM_CTRL_ADDR_MASK) << EEPROM_CTRL_ADDR_SHIFT; + AT_WRITE_REG(hw, REG_EEPROM_CTRL, control); + + for (i = 0; i < 10; i++) { + udelay(100); + AT_READ_REG(hw, REG_EEPROM_CTRL, &control); + if (control & EEPROM_CTRL_RW) + break; + } + if (control & EEPROM_CTRL_RW) { + AT_READ_REG(hw, REG_EEPROM_CTRL, &data); + AT_READ_REG(hw, REG_EEPROM_DATA_LO, p_value); + data = data & 0xFFFF; + *p_value = swab32((data << 16) | (*p_value >> 16)); + ret = true; + } + if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) + AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); + + return ret; +} +/* + * Reads the adapter's MAC address from the EEPROM + * + * hw - Struct containing variables accessed by shared code + */ +int atl1c_read_mac_addr(struct atl1c_hw *hw) +{ + int err = 0; + + err = atl1c_get_permanent_address(hw); + if (err) + random_ether_addr(hw->perm_mac_addr); + + memcpy(hw->mac_addr, hw->perm_mac_addr, sizeof(hw->perm_mac_addr)); + return 0; +} + +/* + * atl1c_hash_mc_addr + * purpose + * set hash value for a multicast address + * hash calcu processing : + * 1. calcu 32bit CRC for multicast address + * 2. reverse crc with MSB to LSB + */ +u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr) +{ + u32 crc32; + u32 value = 0; + int i; + + crc32 = ether_crc_le(6, mc_addr); + for (i = 0; i < 32; i++) + value |= (((crc32 >> i) & 1) << (31 - i)); + + return value; +} + +/* + * Sets the bit in the multicast table corresponding to the hash value. + * hw - Struct containing variables accessed by shared code + * hash_value - Multicast address hash value + */ +void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value) +{ + u32 hash_bit, hash_reg; + u32 mta; + + /* + * The HASH Table is a register array of 2 32-bit registers. + * It is treated like an array of 64 bits. We want to set + * bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The register is determined by the + * upper bit of the hash value and the bit within that + * register are determined by the lower 5 bits of the value. + */ + hash_reg = (hash_value >> 31) & 0x1; + hash_bit = (hash_value >> 26) & 0x1F; + + mta = AT_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg); + + mta |= (1 << hash_bit); + + AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta); +} + +/* + * Reads the value from a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to read + */ +int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data) +{ + u32 val; + int i; + + val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | + MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | + MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + + AT_WRITE_REG(hw, REG_MDIO_CTRL, val); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + AT_READ_REG(hw, REG_MDIO_CTRL, &val); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + if (!(val & (MDIO_START | MDIO_BUSY))) { + *phy_data = (u16)val; + return 0; + } + + return -1; +} + +/* + * Writes a value to a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to write + * data - data to write to the PHY + */ +int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data) +{ + int i; + u32 val; + + val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | + (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | + MDIO_SUP_PREAMBLE | MDIO_START | + MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + + AT_WRITE_REG(hw, REG_MDIO_CTRL, val); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + AT_READ_REG(hw, REG_MDIO_CTRL, &val); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + + if (!(val & (MDIO_START | MDIO_BUSY))) + return 0; + + return -1; +} + +/* + * Configures PHY autoneg and flow control advertisement settings + * + * hw - Struct containing variables accessed by shared code + */ +static int atl1c_phy_setup_adv(struct atl1c_hw *hw) +{ + u16 mii_adv_data = ADVERTISE_DEFAULT_CAP & ~ADVERTISE_SPEED_MASK; + u16 mii_giga_ctrl_data = GIGA_CR_1000T_DEFAULT_CAP & + ~GIGA_CR_1000T_SPEED_MASK; + + if (hw->autoneg_advertised & ADVERTISED_10baseT_Half) + mii_adv_data |= ADVERTISE_10HALF; + if (hw->autoneg_advertised & ADVERTISED_10baseT_Full) + mii_adv_data |= ADVERTISE_10FULL; + if (hw->autoneg_advertised & ADVERTISED_100baseT_Half) + mii_adv_data |= ADVERTISE_100HALF; + if (hw->autoneg_advertised & ADVERTISED_100baseT_Full) + mii_adv_data |= ADVERTISE_100FULL; + + if (hw->autoneg_advertised & ADVERTISED_Autoneg) + mii_adv_data |= ADVERTISE_10HALF | ADVERTISE_10FULL | + ADVERTISE_100HALF | ADVERTISE_100FULL; + + if (hw->ctrl_flags & ATL1C_LINK_CAP_1000M) { + if (hw->autoneg_advertised & ADVERTISED_1000baseT_Half) + mii_giga_ctrl_data |= ADVERTISE_1000HALF; + if (hw->autoneg_advertised & ADVERTISED_1000baseT_Full) + mii_giga_ctrl_data |= ADVERTISE_1000FULL; + if (hw->autoneg_advertised & ADVERTISED_Autoneg) + mii_giga_ctrl_data |= ADVERTISE_1000HALF | + ADVERTISE_1000FULL; + } + + if (atl1c_write_phy_reg(hw, MII_ADVERTISE, mii_adv_data) != 0 || + atl1c_write_phy_reg(hw, MII_GIGA_CR, mii_giga_ctrl_data) != 0) + return -1; + return 0; +} + +void atl1c_phy_disable(struct atl1c_hw *hw) +{ + AT_WRITE_REGW(hw, REG_GPHY_CTRL, + GPHY_CTRL_PW_WOL_DIS | GPHY_CTRL_EXT_RESET); +} + +static void atl1c_phy_magic_data(struct atl1c_hw *hw) +{ + u16 data; + + data = ANA_LOOP_SEL_10BT | ANA_EN_MASK_TB | ANA_EN_10BT_IDLE | + ((1 & ANA_INTERVAL_SEL_TIMER_MASK) << + ANA_INTERVAL_SEL_TIMER_SHIFT); + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_18); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + data = (2 & ANA_SERDES_CDR_BW_MASK) | ANA_MS_PAD_DBG | + ANA_SERDES_EN_DEEM | ANA_SERDES_SEL_HSP | ANA_SERDES_EN_PLL | + ANA_SERDES_EN_LCKDT; + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_5); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + data = (44 & ANA_LONG_CABLE_TH_100_MASK) | + ((33 & ANA_SHORT_CABLE_TH_100_MASK) << + ANA_SHORT_CABLE_TH_100_SHIFT) | ANA_BP_BAD_LINK_ACCUM | + ANA_BP_SMALL_BW; + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_54); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + data = (11 & ANA_IECHO_ADJ_MASK) | ((11 & ANA_IECHO_ADJ_MASK) << + ANA_IECHO_ADJ_2_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) << + ANA_IECHO_ADJ_1_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) << + ANA_IECHO_ADJ_0_SHIFT); + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_4); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + data = ANA_RESTART_CAL | ((7 & ANA_MANUL_SWICH_ON_MASK) << + ANA_MANUL_SWICH_ON_SHIFT) | ANA_MAN_ENABLE | + ANA_SEL_HSP | ANA_EN_HB | ANA_OEN_125M; + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_0); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + if (hw->ctrl_flags & ATL1C_HIB_DISABLE) { + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_41); + if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0) + return; + data &= ~ANA_TOP_PS_EN; + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_11); + if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0) + return; + data &= ~ANA_PS_HIB_EN; + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + } +} + +int atl1c_phy_reset(struct atl1c_hw *hw) +{ + struct atl1c_adapter *adapter = hw->adapter; + struct pci_dev *pdev = adapter->pdev; + u32 phy_ctrl_data = GPHY_CTRL_DEFAULT; + u32 mii_ier_data = IER_LINK_UP | IER_LINK_DOWN; + int err; + + if (hw->ctrl_flags & ATL1C_HIB_DISABLE) + phy_ctrl_data &= ~GPHY_CTRL_HIB_EN; + + AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data); + AT_WRITE_FLUSH(hw); + msleep(40); + phy_ctrl_data |= GPHY_CTRL_EXT_RESET; + AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data); + AT_WRITE_FLUSH(hw); + msleep(10); + + /*Enable PHY LinkChange Interrupt */ + err = atl1c_write_phy_reg(hw, MII_IER, mii_ier_data); + if (err) { + if (netif_msg_hw(adapter)) + dev_err(&pdev->dev, + "Error enable PHY linkChange Interrupt\n"); + return err; + } + if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION)) + atl1c_phy_magic_data(hw); + return 0; +} + +int atl1c_phy_init(struct atl1c_hw *hw) +{ + struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter; + struct pci_dev *pdev = adapter->pdev; + int ret_val; + u16 mii_bmcr_data = BMCR_RESET; + u16 phy_id1, phy_id2; + + if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &phy_id1) != 0) || + (atl1c_read_phy_reg(hw, MII_PHYSID2, &phy_id2) != 0)) { + if (netif_msg_link(adapter)) + dev_err(&pdev->dev, "Error get phy ID\n"); + return -1; + } + switch (hw->media_type) { + case MEDIA_TYPE_AUTO_SENSOR: + ret_val = atl1c_phy_setup_adv(hw); + if (ret_val) { + if (netif_msg_link(adapter)) + dev_err(&pdev->dev, + "Error Setting up Auto-Negotiation\n"); + return ret_val; + } + mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG; + break; + case MEDIA_TYPE_100M_FULL: + mii_bmcr_data |= BMCR_SPEED_100 | BMCR_FULL_DUPLEX; + break; + case MEDIA_TYPE_100M_HALF: + mii_bmcr_data |= BMCR_SPEED_100; + break; + case MEDIA_TYPE_10M_FULL: + mii_bmcr_data |= BMCR_SPEED_10 | BMCR_FULL_DUPLEX; + break; + case MEDIA_TYPE_10M_HALF: + mii_bmcr_data |= BMCR_SPEED_10; + break; + default: + if (netif_msg_link(adapter)) + dev_err(&pdev->dev, "Wrong Media type %d\n", + hw->media_type); + return -1; + break; + } + + ret_val = atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data); + if (ret_val) + return ret_val; + hw->phy_configured = true; + + return 0; +} + +/* + * Detects the current speed and duplex settings of the hardware. + * + * hw - Struct containing variables accessed by shared code + * speed - Speed of the connection + * duplex - Duplex setting of the connection + */ +int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex) +{ + int err; + u16 phy_data; + + /* Read PHY Specific Status Register (17) */ + err = atl1c_read_phy_reg(hw, MII_GIGA_PSSR, &phy_data); + if (err) + return err; + + if (!(phy_data & GIGA_PSSR_SPD_DPLX_RESOLVED)) + return -1; + + switch (phy_data & GIGA_PSSR_SPEED) { + case GIGA_PSSR_1000MBS: + *speed = SPEED_1000; + break; + case GIGA_PSSR_100MBS: + *speed = SPEED_100; + break; + case GIGA_PSSR_10MBS: + *speed = SPEED_10; + break; + default: + return -1; + break; + } + + if (phy_data & GIGA_PSSR_DPLX) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return 0; +} + +int atl1c_restart_autoneg(struct atl1c_hw *hw) +{ + int err = 0; + u16 mii_bmcr_data = BMCR_RESET; + + err = atl1c_phy_setup_adv(hw); + if (err) + return err; + mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG; + + return atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data); +} diff --git a/drivers/net/atl1c/atl1c_hw.h b/drivers/net/atl1c/atl1c_hw.h new file mode 100644 index 0000000..c2c738d --- /dev/null +++ b/drivers/net/atl1c/atl1c_hw.h @@ -0,0 +1,859 @@ +/* + * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _ATL1C_HW_H_ +#define _ATL1C_HW_H_ + +#include <linux/types.h> +#include <linux/mii.h> + +struct atl1c_adapter; +struct atl1c_hw; + +/* function prototype */ +void atl1c_phy_disable(struct atl1c_hw *hw); +void atl1c_hw_set_mac_addr(struct atl1c_hw *hw); +int atl1c_phy_reset(struct atl1c_hw *hw); +int atl1c_read_mac_addr(struct atl1c_hw *hw); +int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex); +u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr); +void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value); +int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data); +int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data); +bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value); +int atl1c_phy_init(struct atl1c_hw *hw); +int atl1c_check_eeprom_exist(struct atl1c_hw *hw); +int atl1c_restart_autoneg(struct atl1c_hw *hw); + +/* register definition */ +#define REG_DEVICE_CAP 0x5C +#define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7 +#define DEVICE_CAP_MAX_PAYLOAD_SHIFT 0 + +#define REG_DEVICE_CTRL 0x60 +#define DEVICE_CTRL_MAX_PAYLOAD_MASK 0x7 +#define DEVICE_CTRL_MAX_PAYLOAD_SHIFT 5 +#define DEVICE_CTRL_MAX_RREQ_SZ_MASK 0x7 +#define DEVICE_CTRL_MAX_RREQ_SZ_SHIFT 12 + +#define REG_LINK_CTRL 0x68 +#define LINK_CTRL_L0S_EN 0x01 +#define LINK_CTRL_L1_EN 0x02 + +#define REG_VPD_CAP 0x6C +#define VPD_CAP_ID_MASK 0xff +#define VPD_CAP_ID_SHIFT 0 +#define VPD_CAP_NEXT_PTR_MASK 0xFF +#define VPD_CAP_NEXT_PTR_SHIFT 8 +#define VPD_CAP_VPD_ADDR_MASK 0x7FFF +#define VPD_CAP_VPD_ADDR_SHIFT 16 +#define VPD_CAP_VPD_FLAG 0x80000000 + +#define REG_VPD_DATA 0x70 + +#define REG_PCIE_UC_SEVERITY 0x10C +#define PCIE_UC_SERVRITY_TRN 0x00000001 +#define PCIE_UC_SERVRITY_DLP 0x00000010 +#define PCIE_UC_SERVRITY_PSN_TLP 0x00001000 +#define PCIE_UC_SERVRITY_FCP 0x00002000 +#define PCIE_UC_SERVRITY_CPL_TO 0x00004000 +#define PCIE_UC_SERVRITY_CA 0x00008000 +#define PCIE_UC_SERVRITY_UC 0x00010000 +#define PCIE_UC_SERVRITY_ROV 0x00020000 +#define PCIE_UC_SERVRITY_MLFP 0x00040000 +#define PCIE_UC_SERVRITY_ECRC 0x00080000 +#define PCIE_UC_SERVRITY_UR 0x00100000 + +#define REG_DEV_SERIALNUM_CTRL 0x200 +#define REG_DEV_MAC_SEL_MASK 0x0 /* 0:EUI; 1:MAC */ +#define REG_DEV_MAC_SEL_SHIFT 0 +#define REG_DEV_SERIAL_NUM_EN_MASK 0x1 +#define REG_DEV_SERIAL_NUM_EN_SHIFT 1 + +#define REG_TWSI_CTRL 0x218 +#define TWSI_CTRL_LD_OFFSET_MASK 0xFF +#define TWSI_CTRL_LD_OFFSET_SHIFT 0 +#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7 +#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8 +#define TWSI_CTRL_SW_LDSTART 0x800 +#define TWSI_CTRL_HW_LDSTART 0x1000 +#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F +#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15 +#define TWSI_CTRL_LD_EXIST 0x400000 +#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3 +#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23 +#define TWSI_CTRL_FREQ_SEL_100K 0 +#define TWSI_CTRL_FREQ_SEL_200K 1 +#define TWSI_CTRL_FREQ_SEL_300K 2 +#define TWSI_CTRL_FREQ_SEL_400K 3 +#define TWSI_CTRL_SMB_SLV_ADDR +#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3 +#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24 + + +#define REG_PCIE_DEV_MISC_CTRL 0x21C +#define PCIE_DEV_MISC_EXT_PIPE 0x2 +#define PCIE_DEV_MISC_RETRY_BUFDIS 0x1 +#define PCIE_DEV_MISC_SPIROM_EXIST 0x4 +#define PCIE_DEV_MISC_SERDES_ENDIAN 0x8 +#define PCIE_DEV_MISC_SERDES_SEL_DIN 0x10 + +#define REG_PCIE_PHYMISC 0x1000 +#define PCIE_PHYMISC_FORCE_RCV_DET 0x4 + +#define REG_TWSI_DEBUG 0x1108 +#define TWSI_DEBUG_DEV_EXIST 0x20000000 + +#define REG_EEPROM_CTRL 0x12C0 +#define EEPROM_CTRL_DATA_HI_MASK 0xFFFF +#define EEPROM_CTRL_DATA_HI_SHIFT 0 +#define EEPROM_CTRL_ADDR_MASK 0x3FF +#define EEPROM_CTRL_ADDR_SHIFT 16 +#define EEPROM_CTRL_ACK 0x40000000 +#define EEPROM_CTRL_RW 0x80000000 + +#define REG_EEPROM_DATA_LO 0x12C4 + +#define REG_OTP_CTRL 0x12F0 +#define OTP_CTRL_CLK_EN 0x0002 + +#define REG_PM_CTRL 0x12F8 +#define PM_CTRL_SDES_EN 0x00000001 +#define PM_CTRL_RBER_EN 0x00000002 +#define PM_CTRL_CLK_REQ_EN 0x00000004 +#define PM_CTRL_ASPM_L1_EN 0x00000008 +#define PM_CTRL_SERDES_L1_EN 0x00000010 +#define PM_CTRL_SERDES_PLL_L1_EN 0x00000020 +#define PM_CTRL_SERDES_PD_EX_L1 0x00000040 +#define PM_CTRL_SERDES_BUDS_RX_L1_EN 0x00000080 +#define PM_CTRL_L0S_ENTRY_TIMER_MASK 0xF +#define PM_CTRL_L0S_ENTRY_TIMER_SHIFT 8 +#define PM_CTRL_ASPM_L0S_EN 0x00001000 +#define PM_CTRL_CLK_SWH_L1 0x00002000 +#define PM_CTRL_CLK_PWM_VER1_1 0x00004000 +#define PM_CTRL_PCIE_RECV 0x00008000 +#define PM_CTRL_L1_ENTRY_TIMER_MASK 0xF +#define PM_CTRL_L1_ENTRY_TIMER_SHIFT 16 +#define PM_CTRL_PM_REQ_TIMER_MASK 0xF +#define PM_CTRL_PM_REQ_TIMER_SHIFT 20 +#define PM_CTRL_LCKDET_TIMER_MASK 0x3F +#define PM_CTRL_LCKDET_TIMER_SHIFT 24 +#define PM_CTRL_MAC_ASPM_CHK 0x40000000 +#define PM_CTRL_HOTRST 0x80000000 + +/* Selene Master Control Register */ +#define REG_MASTER_CTRL 0x1400 +#define MASTER_CTRL_SOFT_RST 0x1 +#define MASTER_CTRL_TEST_MODE_MASK 0x3 +#define MASTER_CTRL_TEST_MODE_SHIFT 2 +#define MASTER_CTRL_BERT_START 0x10 +#define MASTER_CTRL_MTIMER_EN 0x100 +#define MASTER_CTRL_MANUAL_INT 0x200 +#define MASTER_CTRL_TX_ITIMER_EN 0x400 +#define MASTER_CTRL_RX_ITIMER_EN 0x800 +#define MASTER_CTRL_CLK_SEL_DIS 0x1000 +#define MASTER_CTRL_CLK_SWH_MODE 0x2000 +#define MASTER_CTRL_INT_RDCLR 0x4000 +#define MASTER_CTRL_REV_NUM_SHIFT 16 +#define MASTER_CTRL_REV_NUM_MASK 0xff +#define MASTER_CTRL_DEV_ID_SHIFT 24 +#define MASTER_CTRL_DEV_ID_MASK 0x7f +#define MASTER_CTRL_OTP_SEL 0x80000000 + +/* Timer Initial Value Register */ +#define REG_MANUAL_TIMER_INIT 0x1404 + +/* IRQ ModeratorTimer Initial Value Register */ +#define REG_IRQ_MODRT_TIMER_INIT 0x1408 +#define IRQ_MODRT_TIMER_MASK 0xffff +#define IRQ_MODRT_TX_TIMER_SHIFT 0 +#define IRQ_MODRT_RX_TIMER_SHIFT 16 + +#define REG_GPHY_CTRL 0x140C +#define GPHY_CTRL_EXT_RESET 0x1 +#define GPHY_CTRL_RTL_MODE 0x2 +#define GPHY_CTRL_LED_MODE 0x4 +#define GPHY_CTRL_ANEG_NOW 0x8 +#define GPHY_CTRL_REV_ANEG 0x10 +#define GPHY_CTRL_GATE_25M_EN 0x20 +#define GPHY_CTRL_LPW_EXIT 0x40 +#define GPHY_CTRL_PHY_IDDQ 0x80 +#define GPHY_CTRL_PHY_IDDQ_DIS 0x100 +#define GPHY_CTRL_GIGA_DIS 0x200 +#define GPHY_CTRL_HIB_EN 0x400 +#define GPHY_CTRL_HIB_PULSE 0x800 +#define GPHY_CTRL_SEL_ANA_RST 0x1000 +#define GPHY_CTRL_PHY_PLL_ON 0x2000 +#define GPHY_CTRL_PWDOWN_HW 0x4000 +#define GPHY_CTRL_PHY_PLL_BYPASS 0x8000 + +#define GPHY_CTRL_DEFAULT ( \ + GPHY_CTRL_SEL_ANA_RST |\ + GPHY_CTRL_HIB_PULSE |\ + GPHY_CTRL_HIB_EN) + +#define GPHY_CTRL_PW_WOL_DIS ( \ + GPHY_CTRL_SEL_ANA_RST |\ + GPHY_CTRL_HIB_PULSE |\ + GPHY_CTRL_HIB_EN |\ + GPHY_CTRL_PWDOWN_HW |\ + GPHY_CTRL_PHY_IDDQ) + +/* Block IDLE Status Register */ +#define REG_IDLE_STATUS 0x1410 +#define IDLE_STATUS_MASK 0x00FF +#define IDLE_STATUS_RXMAC_NO_IDLE 0x1 +#define IDLE_STATUS_TXMAC_NO_IDLE 0x2 +#define IDLE_STATUS_RXQ_NO_IDLE 0x4 +#define IDLE_STATUS_TXQ_NO_IDLE 0x8 +#define IDLE_STATUS_DMAR_NO_IDLE 0x10 +#define IDLE_STATUS_DMAW_NO_IDLE 0x20 +#define IDLE_STATUS_SMB_NO_IDLE 0x40 +#define IDLE_STATUS_CMB_NO_IDLE 0x80 + +/* MDIO Control Register */ +#define REG_MDIO_CTRL 0x1414 +#define MDIO_DATA_MASK 0xffff /* On MDIO write, the 16-bit + * control data to write to PHY + * MII management register */ +#define MDIO_DATA_SHIFT 0 /* On MDIO read, the 16-bit + * status data that was read + * from the PHY MII management register */ +#define MDIO_REG_ADDR_MASK 0x1f /* MDIO register address */ +#define MDIO_REG_ADDR_SHIFT 16 +#define MDIO_RW 0x200000 /* 1: read, 0: write */ +#define MDIO_SUP_PREAMBLE 0x400000 /* Suppress preamble */ +#define MDIO_START 0x800000 /* Write 1 to initiate the MDIO + * master. And this bit is self + * cleared after one cycle */ +#define MDIO_CLK_SEL_SHIFT 24 +#define MDIO_CLK_25_4 0 +#define MDIO_CLK_25_6 2 +#define MDIO_CLK_25_8 3 +#define MDIO_CLK_25_10 4 +#define MDIO_CLK_25_14 5 +#define MDIO_CLK_25_20 6 +#define MDIO_CLK_25_28 7 +#define MDIO_BUSY 0x8000000 +#define MDIO_AP_EN 0x10000000 +#define MDIO_WAIT_TIMES 10 + +/* MII PHY Status Register */ +#define REG_PHY_STATUS 0x1418 +#define PHY_GENERAL_STATUS_MASK 0xFFFF +#define PHY_STATUS_RECV_ENABLE 0x0001 +#define PHY_OE_PWSP_STATUS_MASK 0x07FF +#define PHY_OE_PWSP_STATUS_SHIFT 16 +#define PHY_STATUS_LPW_STATE 0x80000000 +/* BIST Control and Status Register0 (for the Packet Memory) */ +#define REG_BIST0_CTRL 0x141c +#define BIST0_NOW 0x1 +#define BIST0_SRAM_FAIL 0x2 /* 1: The SRAM failure is + * un-repairable because + * it has address decoder + * failure or more than 1 cell + * stuck-to-x failure */ +#define BIST0_FUSE_FLAG 0x4 + +/* BIST Control and Status Register1(for the retry buffer of PCI Express) */ +#define REG_BIST1_CTRL 0x1420 +#define BIST1_NOW 0x1 +#define BIST1_SRAM_FAIL 0x2 +#define BIST1_FUSE_FLAG 0x4 + +/* SerDes Lock Detect Control and Status Register */ +#define REG_SERDES_LOCK 0x1424 +#define SERDES_LOCK_DETECT 0x1 /* SerDes lock detected. This signal + * comes from Analog SerDes */ +#define SERDES_LOCK_DETECT_EN 0x2 /* 1: Enable SerDes Lock detect function */ + +/* MAC Control Register */ +#define REG_MAC_CTRL 0x1480 +#define MAC_CTRL_TX_EN 0x1 +#define MAC_CTRL_RX_EN 0x2 +#define MAC_CTRL_TX_FLOW 0x4 +#define MAC_CTRL_RX_FLOW 0x8 +#define MAC_CTRL_LOOPBACK 0x10 +#define MAC_CTRL_DUPLX 0x20 +#define MAC_CTRL_ADD_CRC 0x40 +#define MAC_CTRL_PAD 0x80 +#define MAC_CTRL_LENCHK 0x100 +#define MAC_CTRL_HUGE_EN 0x200 +#define MAC_CTRL_PRMLEN_SHIFT 10 +#define MAC_CTRL_PRMLEN_MASK 0xf +#define MAC_CTRL_RMV_VLAN 0x4000 +#define MAC_CTRL_PROMIS_EN 0x8000 +#define MAC_CTRL_TX_PAUSE 0x10000 +#define MAC_CTRL_SCNT 0x20000 +#define MAC_CTRL_SRST_TX 0x40000 +#define MAC_CTRL_TX_SIMURST 0x80000 +#define MAC_CTRL_SPEED_SHIFT 20 +#define MAC_CTRL_SPEED_MASK 0x3 +#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000 +#define MAC_CTRL_TX_HUGE 0x800000 +#define MAC_CTRL_RX_CHKSUM_EN 0x1000000 +#define MAC_CTRL_MC_ALL_EN 0x2000000 +#define MAC_CTRL_BC_EN 0x4000000 +#define MAC_CTRL_DBG 0x8000000 +#define MAC_CTRL_SINGLE_PAUSE_EN 0x10000000 + +/* MAC IPG/IFG Control Register */ +#define REG_MAC_IPG_IFG 0x1484 +#define MAC_IPG_IFG_IPGT_SHIFT 0 /* Desired back to back + * inter-packet gap. The + * default is 96-bit time */ +#define MAC_IPG_IFG_IPGT_MASK 0x7f +#define MAC_IPG_IFG_MIFG_SHIFT 8 /* Minimum number of IFG to + * enforce in between RX frames */ +#define MAC_IPG_IFG_MIFG_MASK 0xff /* Frame gap below such IFP is dropped */ +#define MAC_IPG_IFG_IPGR1_SHIFT 16 /* 64bit Carrier-Sense window */ +#define MAC_IPG_IFG_IPGR1_MASK 0x7f +#define MAC_IPG_IFG_IPGR2_SHIFT 24 /* 96-bit IPG window */ +#define MAC_IPG_IFG_IPGR2_MASK 0x7f + +/* MAC STATION ADDRESS */ +#define REG_MAC_STA_ADDR 0x1488 + +/* Hash table for multicast address */ +#define REG_RX_HASH_TABLE 0x1490 + +/* MAC Half-Duplex Control Register */ +#define REG_MAC_HALF_DUPLX_CTRL 0x1498 +#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 /* Collision Window */ +#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff +#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12 +#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf +#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000 +#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000 +#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 /* No back-off on backpressure, + * immediately start the + * transmission after back pressure */ +#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */ +#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 /* Maximum binary exponential number */ +#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf +#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 /* IPG to start JAM for collision based flow control in half-duplex */ +#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf /* mode. In unit of 8-bit time */ + +/* Maximum Frame Length Control Register */ +#define REG_MTU 0x149c + +/* Wake-On-Lan control register */ +#define REG_WOL_CTRL 0x14a0 +#define WOL_PATTERN_EN 0x00000001 +#define WOL_PATTERN_PME_EN 0x00000002 +#define WOL_MAGIC_EN 0x00000004 +#define WOL_MAGIC_PME_EN 0x00000008 +#define WOL_LINK_CHG_EN 0x00000010 +#define WOL_LINK_CHG_PME_EN 0x00000020 +#define WOL_PATTERN_ST 0x00000100 +#define WOL_MAGIC_ST 0x00000200 +#define WOL_LINKCHG_ST 0x00000400 +#define WOL_CLK_SWITCH_EN 0x00008000 +#define WOL_PT0_EN 0x00010000 +#define WOL_PT1_EN 0x00020000 +#define WOL_PT2_EN 0x00040000 +#define WOL_PT3_EN 0x00080000 +#define WOL_PT4_EN 0x00100000 +#define WOL_PT5_EN 0x00200000 +#define WOL_PT6_EN 0x00400000 + +/* WOL Length ( 2 DWORD ) */ +#define REG_WOL_PATTERN_LEN 0x14a4 +#define WOL_PT_LEN_MASK 0x7f +#define WOL_PT0_LEN_SHIFT 0 +#define WOL_PT1_LEN_SHIFT 8 +#define WOL_PT2_LEN_SHIFT 16 +#define WOL_PT3_LEN_SHIFT 24 +#define WOL_PT4_LEN_SHIFT 0 +#define WOL_PT5_LEN_SHIFT 8 +#define WOL_PT6_LEN_SHIFT 16 + +/* Internal SRAM Partition Register */ +#define RFDX_HEAD_ADDR_MASK 0x03FF +#define RFDX_HARD_ADDR_SHIFT 0 +#define RFDX_TAIL_ADDR_MASK 0x03FF +#define RFDX_TAIL_ADDR_SHIFT 16 + +#define REG_SRAM_RFD0_INFO 0x1500 +#define REG_SRAM_RFD1_INFO 0x1504 +#define REG_SRAM_RFD2_INFO 0x1508 +#define REG_SRAM_RFD3_INFO 0x150C + +#define REG_RFD_NIC_LEN 0x1510 /* In 8-bytes */ +#define RFD_NIC_LEN_MASK 0x03FF + +#define REG_SRAM_TRD_ADDR 0x1518 +#define TPD_HEAD_ADDR_MASK 0x03FF +#define TPD_HEAD_ADDR_SHIFT 0 +#define TPD_TAIL_ADDR_MASK 0x03FF +#define TPD_TAIL_ADDR_SHIFT 16 + +#define REG_SRAM_TRD_LEN 0x151C /* In 8-bytes */ +#define TPD_NIC_LEN_MASK 0x03FF + +#define REG_SRAM_RXF_ADDR 0x1520 +#define REG_SRAM_RXF_LEN 0x1524 +#define REG_SRAM_TXF_ADDR 0x1528 +#define REG_SRAM_TXF_LEN 0x152C +#define REG_SRAM_TCPH_ADDR 0x1530 +#define REG_SRAM_PKTH_ADDR 0x1532 + +/* + * Load Ptr Register + * Software sets this bit after the initialization of the head and tail */ +#define REG_LOAD_PTR 0x1534 + +/* + * addresses of all descriptors, as well as the following descriptor + * control register, which triggers each function block to load the head + * pointer to prepare for the operation. This bit is then self-cleared + * after one cycle. + */ +#define REG_RX_BASE_ADDR_HI 0x1540 +#define REG_TX_BASE_ADDR_HI 0x1544 +#define REG_SMB_BASE_ADDR_HI 0x1548 +#define REG_SMB_BASE_ADDR_LO 0x154C +#define REG_RFD0_HEAD_ADDR_LO 0x1550 +#define REG_RFD1_HEAD_ADDR_LO 0x1554 +#define REG_RFD2_HEAD_ADDR_LO 0x1558 +#define REG_RFD3_HEAD_ADDR_LO 0x155C +#define REG_RFD_RING_SIZE 0x1560 +#define RFD_RING_SIZE_MASK 0x0FFF +#define REG_RX_BUF_SIZE 0x1564 +#define RX_BUF_SIZE_MASK 0xFFFF +#define REG_RRD0_HEAD_ADDR_LO 0x1568 +#define REG_RRD1_HEAD_ADDR_LO 0x156C +#define REG_RRD2_HEAD_ADDR_LO 0x1570 +#define REG_RRD3_HEAD_ADDR_LO 0x1574 +#define REG_RRD_RING_SIZE 0x1578 +#define RRD_RING_SIZE_MASK 0x0FFF +#define REG_HTPD_HEAD_ADDR_LO 0x157C +#define REG_NTPD_HEAD_ADDR_LO 0x1580 +#define REG_TPD_RING_SIZE 0x1584 +#define TPD_RING_SIZE_MASK 0xFFFF +#define REG_CMB_BASE_ADDR_LO 0x1588 + +/* RSS about */ +#define REG_RSS_KEY0 0x14B0 +#define REG_RSS_KEY1 0x14B4 +#define REG_RSS_KEY2 0x14B8 +#define REG_RSS_KEY3 0x14BC +#define REG_RSS_KEY4 0x14C0 +#define REG_RSS_KEY5 0x14C4 +#define REG_RSS_KEY6 0x14C8 +#define REG_RSS_KEY7 0x14CC +#define REG_RSS_KEY8 0x14D0 +#define REG_RSS_KEY9 0x14D4 +#define REG_IDT_TABLE0 0x14E0 +#define REG_IDT_TABLE1 0x14E4 +#define REG_IDT_TABLE2 0x14E8 +#define REG_IDT_TABLE3 0x14EC +#define REG_IDT_TABLE4 0x14F0 +#define REG_IDT_TABLE5 0x14F4 +#define REG_IDT_TABLE6 0x14F8 +#define REG_IDT_TABLE7 0x14FC +#define REG_IDT_TABLE REG_IDT_TABLE0 +#define REG_RSS_HASH_VALUE 0x15B0 +#define REG_RSS_HASH_FLAG 0x15B4 +#define REG_BASE_CPU_NUMBER 0x15B8 + +/* TXQ Control Register */ +#define REG_TXQ_CTRL 0x1590 +#define TXQ_NUM_TPD_BURST_MASK 0xF +#define TXQ_NUM_TPD_BURST_SHIFT 0 +#define TXQ_CTRL_IP_OPTION_EN 0x10 +#define TXQ_CTRL_EN 0x20 +#define TXQ_CTRL_ENH_MODE 0x40 +#define TXQ_CTRL_LS_8023_EN 0x80 +#define TXQ_TXF_BURST_NUM_SHIFT 16 +#define TXQ_TXF_BURST_NUM_MASK 0xFFFF + +/* Jumbo packet Threshold for task offload */ +#define REG_TX_TSO_OFFLOAD_THRESH 0x1594 /* In 8-bytes */ +#define TX_TSO_OFFLOAD_THRESH_MASK 0x07FF + +#define REG_TXF_WATER_MARK 0x1598 /* In 8-bytes */ +#define TXF_WATER_MARK_MASK 0x0FFF +#define TXF_LOW_WATER_MARK_SHIFT 0 +#define TXF_HIGH_WATER_MARK_SHIFT 16 +#define TXQ_CTRL_BURST_MODE_EN 0x80000000 + +#define REG_THRUPUT_MON_CTRL 0x159C +#define THRUPUT_MON_RATE_MASK 0x3 +#define THRUPUT_MON_RATE_SHIFT 0 +#define THRUPUT_MON_EN 0x80 + +/* RXQ Control Register */ +#define REG_RXQ_CTRL 0x15A0 +#define ASPM_THRUPUT_LIMIT_MASK 0x3 +#define ASPM_THRUPUT_LIMIT_SHIFT 0 +#define ASPM_THRUPUT_LIMIT_NO 0x00 +#define ASPM_THRUPUT_LIMIT_1M 0x01 +#define ASPM_THRUPUT_LIMIT_10M 0x02 +#define ASPM_THRUPUT_LIMIT_100M 0x04 +#define RXQ1_CTRL_EN 0x10 +#define RXQ2_CTRL_EN 0x20 +#define RXQ3_CTRL_EN 0x40 +#define IPV6_CHKSUM_CTRL_EN 0x80 +#define RSS_HASH_BITS_MASK 0x00FF +#define RSS_HASH_BITS_SHIFT 8 +#define RSS_HASH_IPV4 0x10000 +#define RSS_HASH_IPV4_TCP 0x20000 +#define RSS_HASH_IPV6 0x40000 +#define RSS_HASH_IPV6_TCP 0x80000 +#define RXQ_RFD_BURST_NUM_MASK 0x003F +#define RXQ_RFD_BURST_NUM_SHIFT 20 +#define RSS_MODE_MASK 0x0003 +#define RSS_MODE_SHIFT 26 +#define RSS_NIP_QUEUE_SEL_MASK 0x1 +#define RSS_NIP_QUEUE_SEL_SHIFT 28 +#define RRS_HASH_CTRL_EN 0x20000000 +#define RX_CUT_THRU_EN 0x40000000 +#define RXQ_CTRL_EN 0x80000000 + +#define REG_RFD_FREE_THRESH 0x15A4 +#define RFD_FREE_THRESH_MASK 0x003F +#define RFD_FREE_HI_THRESH_SHIFT 0 +#define RFD_FREE_LO_THRESH_SHIFT 6 + +/* RXF flow control register */ +#define REG_RXQ_RXF_PAUSE_THRESH 0x15A8 +#define RXQ_RXF_PAUSE_TH_HI_SHIFT 0 +#define RXQ_RXF_PAUSE_TH_HI_MASK 0x0FFF +#define RXQ_RXF_PAUSE_TH_LO_SHIFT 16 +#define RXQ_RXF_PAUSE_TH_LO_MASK 0x0FFF + +#define REG_RXD_DMA_CTRL 0x15AC +#define RXD_DMA_THRESH_MASK 0x0FFF /* In 8-bytes */ +#define RXD_DMA_THRESH_SHIFT 0 +#define RXD_DMA_DOWN_TIMER_MASK 0xFFFF +#define RXD_DMA_DOWN_TIMER_SHIFT 16 + +/* DMA Engine Control Register */ +#define REG_DMA_CTRL 0x15C0 +#define DMA_CTRL_DMAR_IN_ORDER 0x1 +#define DMA_CTRL_DMAR_ENH_ORDER 0x2 +#define DMA_CTRL_DMAR_OUT_ORDER 0x4 +#define DMA_CTRL_RCB_VALUE 0x8 +#define DMA_CTRL_DMAR_BURST_LEN_MASK 0x0007 +#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4 +#define DMA_CTRL_DMAW_BURST_LEN_MASK 0x0007 +#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7 +#define DMA_CTRL_DMAR_REQ_PRI 0x400 +#define DMA_CTRL_DMAR_DLY_CNT_MASK 0x001F +#define DMA_CTRL_DMAR_DLY_CNT_SHIFT 11 +#define DMA_CTRL_DMAW_DLY_CNT_MASK 0x000F +#define DMA_CTRL_DMAW_DLY_CNT_SHIFT 16 +#define DMA_CTRL_CMB_EN 0x100000 +#define DMA_CTRL_SMB_EN 0x200000 +#define DMA_CTRL_CMB_NOW 0x400000 +#define MAC_CTRL_SMB_DIS 0x1000000 +#define DMA_CTRL_SMB_NOW 0x80000000 + +/* CMB/SMB Control Register */ +#define REG_SMB_STAT_TIMER 0x15C4 /* 2us resolution */ +#define SMB_STAT_TIMER_MASK 0xFFFFFF +#define REG_CMB_TPD_THRESH 0x15C8 +#define CMB_TPD_THRESH_MASK 0xFFFF +#define REG_CMB_TX_TIMER 0x15CC /* 2us resolution */ +#define CMB_TX_TIMER_MASK 0xFFFF + +/* Mail box */ +#define MB_RFDX_PROD_IDX_MASK 0xFFFF +#define REG_MB_RFD0_PROD_IDX 0x15E0 +#define REG_MB_RFD1_PROD_IDX 0x15E4 +#define REG_MB_RFD2_PROD_IDX 0x15E8 +#define REG_MB_RFD3_PROD_IDX 0x15EC + +#define MB_PRIO_PROD_IDX_MASK 0xFFFF +#define REG_MB_PRIO_PROD_IDX 0x15F0 +#define MB_HTPD_PROD_IDX_SHIFT 0 +#define MB_NTPD_PROD_IDX_SHIFT 16 + +#define MB_PRIO_CONS_IDX_MASK 0xFFFF +#define REG_MB_PRIO_CONS_IDX 0x15F4 +#define MB_HTPD_CONS_IDX_SHIFT 0 +#define MB_NTPD_CONS_IDX_SHIFT 16 + +#define REG_MB_RFD01_CONS_IDX 0x15F8 +#define MB_RFD0_CONS_IDX_MASK 0x0000FFFF +#define MB_RFD1_CONS_IDX_MASK 0xFFFF0000 +#define REG_MB_RFD23_CONS_IDX 0x15FC +#define MB_RFD2_CONS_IDX_MASK 0x0000FFFF +#define MB_RFD3_CONS_IDX_MASK 0xFFFF0000 + +/* Interrupt Status Register */ +#define REG_ISR 0x1600 +#define ISR_SMB 0x00000001 +#define ISR_TIMER 0x00000002 +/* + * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set + * in Table 51 Selene Master Control Register (Offset 0x1400). + */ +#define ISR_MANUAL 0x00000004 +#define ISR_HW_RXF_OV 0x00000008 /* RXF overflow interrupt */ +#define ISR_RFD0_UR 0x00000010 /* RFD0 under run */ +#define ISR_RFD1_UR 0x00000020 +#define ISR_RFD2_UR 0x00000040 +#define ISR_RFD3_UR 0x00000080 +#define ISR_TXF_UR 0x00000100 +#define ISR_DMAR_TO_RST 0x00000200 +#define ISR_DMAW_TO_RST 0x00000400 +#define ISR_TX_CREDIT 0x00000800 +#define ISR_GPHY 0x00001000 +/* GPHY low power state interrupt */ +#define ISR_GPHY_LPW 0x00002000 +#define ISR_TXQ_TO_RST 0x00004000 +#define ISR_TX_PKT 0x00008000 +#define ISR_RX_PKT_0 0x00010000 +#define ISR_RX_PKT_1 0x00020000 +#define ISR_RX_PKT_2 0x00040000 +#define ISR_RX_PKT_3 0x00080000 +#define ISR_MAC_RX 0x00100000 +#define ISR_MAC_TX 0x00200000 +#define ISR_UR_DETECTED 0x00400000 +#define ISR_FERR_DETECTED 0x00800000 +#define ISR_NFERR_DETECTED 0x01000000 +#define ISR_CERR_DETECTED 0x02000000 +#define ISR_PHY_LINKDOWN 0x04000000 +#define ISR_DIS_INT 0x80000000 + +/* Interrupt Mask Register */ +#define REG_IMR 0x1604 + +#define IMR_NORMAL_MASK (\ + ISR_MANUAL |\ + ISR_HW_RXF_OV |\ + ISR_RFD0_UR |\ + ISR_TXF_UR |\ + ISR_DMAR_TO_RST |\ + ISR_TXQ_TO_RST |\ + ISR_DMAW_TO_RST |\ + ISR_GPHY |\ + ISR_TX_PKT |\ + ISR_RX_PKT_0 |\ + ISR_GPHY_LPW |\ + ISR_PHY_LINKDOWN) + +#define ISR_RX_PKT (\ + ISR_RX_PKT_0 |\ + ISR_RX_PKT_1 |\ + ISR_RX_PKT_2 |\ + ISR_RX_PKT_3) + +#define ISR_OVER (\ + ISR_RFD0_UR |\ + ISR_RFD1_UR |\ + ISR_RFD2_UR |\ + ISR_RFD3_UR |\ + ISR_HW_RXF_OV |\ + ISR_TXF_UR) + +#define ISR_ERROR (\ + ISR_DMAR_TO_RST |\ + ISR_TXQ_TO_RST |\ + ISR_DMAW_TO_RST |\ + ISR_PHY_LINKDOWN) + +#define REG_INT_RETRIG_TIMER 0x1608 +#define INT_RETRIG_TIMER_MASK 0xFFFF + +#define REG_HDS_CTRL 0x160C +#define HDS_CTRL_EN 0x0001 +#define HDS_CTRL_BACKFILLSIZE_SHIFT 8 +#define HDS_CTRL_BACKFILLSIZE_MASK 0x0FFF +#define HDS_CTRL_MAX_HDRSIZE_SHIFT 20 +#define HDS_CTRL_MAC_HDRSIZE_MASK 0x0FFF + +#define REG_MAC_RX_STATUS_BIN 0x1700 +#define REG_MAC_RX_STATUS_END 0x175c +#define REG_MAC_TX_STATUS_BIN 0x1760 +#define REG_MAC_TX_STATUS_END 0x17c0 + +/* DEBUG ADDR */ +#define REG_DEBUG_DATA0 0x1900 +#define REG_DEBUG_DATA1 0x1904 + +/* PHY Control Register */ +#define MII_BMCR 0x00 +#define BMCR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define BMCR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define BMCR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define BMCR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define BMCR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define BMCR_POWER_DOWN 0x0800 /* Power down */ +#define BMCR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define BMCR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define BMCR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define BMCR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define BMCR_SPEED_MASK 0x2040 +#define BMCR_SPEED_1000 0x0040 +#define BMCR_SPEED_100 0x2000 +#define BMCR_SPEED_10 0x0000 + +/* PHY Status Register */ +#define MII_BMSR 0x01 +#define BMMSR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define BMSR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define BMSR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define BMSR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define BMSR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define BMSR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define BMSR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define BMSR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define BMSR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define BMSR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define BMSR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define BMSR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define BMSR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define BMMII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define BMMII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ + +#define MII_PHYSID1 0x02 +#define MII_PHYSID2 0x03 + +/* Autoneg Advertisement Register */ +#define MII_ADVERTISE 0x04 +#define ADVERTISE_SPEED_MASK 0x01E0 +#define ADVERTISE_DEFAULT_CAP 0x0DE0 + +/* 1000BASE-T Control Register */ +#define MII_GIGA_CR 0x09 +#define GIGA_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port 0=DTE device */ + +#define GIGA_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master 0=Configure PHY as Slave */ +#define GIGA_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value 0=Automatic Master/Slave config */ +#define GIGA_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define GIGA_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define GIGA_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define GIGA_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define GIGA_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ +#define GIGA_CR_1000T_SPEED_MASK 0x0300 +#define GIGA_CR_1000T_DEFAULT_CAP 0x0300 + +/* PHY Specific Status Register */ +#define MII_GIGA_PSSR 0x11 +#define GIGA_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ +#define GIGA_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ +#define GIGA_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ +#define GIGA_PSSR_10MBS 0x0000 /* 00=10Mbs */ +#define GIGA_PSSR_100MBS 0x4000 /* 01=100Mbs */ +#define GIGA_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ + +/* PHY Interrupt Enable Register */ +#define MII_IER 0x12 +#define IER_LINK_UP 0x0400 +#define IER_LINK_DOWN 0x0800 + +/* PHY Interrupt Status Register */ +#define MII_ISR 0x13 +#define ISR_LINK_UP 0x0400 +#define ISR_LINK_DOWN 0x0800 + +/* Cable-Detect-Test Control Register */ +#define MII_CDTC 0x16 +#define CDTC_EN_OFF 0 /* sc */ +#define CDTC_EN_BITS 1 +#define CDTC_PAIR_OFF 8 +#define CDTC_PAIR_BIT 2 + +/* Cable-Detect-Test Status Register */ +#define MII_CDTS 0x1C +#define CDTS_STATUS_OFF 8 +#define CDTS_STATUS_BITS 2 +#define CDTS_STATUS_NORMAL 0 +#define CDTS_STATUS_SHORT 1 +#define CDTS_STATUS_OPEN 2 +#define CDTS_STATUS_INVALID 3 + +#define MII_DBG_ADDR 0x1D +#define MII_DBG_DATA 0x1E + +#define MII_ANA_CTRL_0 0x0 +#define ANA_RESTART_CAL 0x0001 +#define ANA_MANUL_SWICH_ON_SHIFT 0x1 +#define ANA_MANUL_SWICH_ON_MASK 0xF +#define ANA_MAN_ENABLE 0x0020 +#define ANA_SEL_HSP 0x0040 +#define ANA_EN_HB 0x0080 +#define ANA_EN_HBIAS 0x0100 +#define ANA_OEN_125M 0x0200 +#define ANA_EN_LCKDT 0x0400 +#define ANA_LCKDT_PHY 0x0800 +#define ANA_AFE_MODE 0x1000 +#define ANA_VCO_SLOW 0x2000 +#define ANA_VCO_FAST 0x4000 +#define ANA_SEL_CLK125M_DSP 0x8000 + +#define MII_ANA_CTRL_4 0x4 +#define ANA_IECHO_ADJ_MASK 0xF +#define ANA_IECHO_ADJ_3_SHIFT 0 +#define ANA_IECHO_ADJ_2_SHIFT 4 +#define ANA_IECHO_ADJ_1_SHIFT 8 +#define ANA_IECHO_ADJ_0_SHIFT 12 + +#define MII_ANA_CTRL_5 0x5 +#define ANA_SERDES_CDR_BW_SHIFT 0 +#define ANA_SERDES_CDR_BW_MASK 0x3 +#define ANA_MS_PAD_DBG 0x0004 +#define ANA_SPEEDUP_DBG 0x0008 +#define ANA_SERDES_TH_LOS_SHIFT 4 +#define ANA_SERDES_TH_LOS_MASK 0x3 +#define ANA_SERDES_EN_DEEM 0x0040 +#define ANA_SERDES_TXELECIDLE 0x0080 +#define ANA_SERDES_BEACON 0x0100 +#define ANA_SERDES_HALFTXDR 0x0200 +#define ANA_SERDES_SEL_HSP 0x0400 +#define ANA_SERDES_EN_PLL 0x0800 +#define ANA_SERDES_EN 0x1000 +#define ANA_SERDES_EN_LCKDT 0x2000 + +#define MII_ANA_CTRL_11 0xB +#define ANA_PS_HIB_EN 0x8000 + +#define MII_ANA_CTRL_18 0x12 +#define ANA_TEST_MODE_10BT_01SHIFT 0 +#define ANA_TEST_MODE_10BT_01MASK 0x3 +#define ANA_LOOP_SEL_10BT 0x0004 +#define ANA_RGMII_MODE_SW 0x0008 +#define ANA_EN_LONGECABLE 0x0010 +#define ANA_TEST_MODE_10BT_2 0x0020 +#define ANA_EN_10BT_IDLE 0x0400 +#define ANA_EN_MASK_TB 0x0800 +#define ANA_TRIGGER_SEL_TIMER_SHIFT 12 +#define ANA_TRIGGER_SEL_TIMER_MASK 0x3 +#define ANA_INTERVAL_SEL_TIMER_SHIFT 14 +#define ANA_INTERVAL_SEL_TIMER_MASK 0x3 + +#define MII_ANA_CTRL_41 0x29 +#define ANA_TOP_PS_EN 0x8000 + +#define MII_ANA_CTRL_54 0x36 +#define ANA_LONG_CABLE_TH_100_SHIFT 0 +#define ANA_LONG_CABLE_TH_100_MASK 0x3F +#define ANA_DESERVED 0x0040 +#define ANA_EN_LIT_CH 0x0080 +#define ANA_SHORT_CABLE_TH_100_SHIFT 8 +#define ANA_SHORT_CABLE_TH_100_MASK 0x3F +#define ANA_BP_BAD_LINK_ACCUM 0x4000 +#define ANA_BP_SMALL_BW 0x8000 + +#endif /*_ATL1C_HW_H_*/ diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c new file mode 100644 index 0000000..deb7b53 --- /dev/null +++ b/drivers/net/atl1c/atl1c_main.c @@ -0,0 +1,2797 @@ +/* + * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include "atl1c.h" + +#define ATL1C_DRV_VERSION "1.0.0.1-NAPI" +char atl1c_driver_name[] = "atl1c"; +char atl1c_driver_version[] = ATL1C_DRV_VERSION; +#define PCI_DEVICE_ID_ATTANSIC_L2C 0x1062 +#define PCI_DEVICE_ID_ATTANSIC_L1C 0x1063 +/* + * atl1c_pci_tbl - PCI Device ID Table + * + * Wildcard entries (PCI_ANY_ID) should come last + * Last entry must be all 0s + * + * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, + * Class, Class Mask, private data (not used) } + */ +static struct pci_device_id atl1c_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1C)}, + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2C)}, + /* required last entry */ + { 0 } +}; +MODULE_DEVICE_TABLE(pci, atl1c_pci_tbl); + +MODULE_AUTHOR("Jie Yang <jie.yang@atheros.com>"); +MODULE_DESCRIPTION("Atheros 1000M Ethernet Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ATL1C_DRV_VERSION); + +static int atl1c_stop_mac(struct atl1c_hw *hw); +static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw); +static void atl1c_enable_tx_ctrl(struct atl1c_hw *hw); +static void atl1c_disable_l0s_l1(struct atl1c_hw *hw); +static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup); +static void atl1c_setup_mac_ctrl(struct atl1c_adapter *adapter); +static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, u8 que, + int *work_done, int work_to_do); + +static const u16 atl1c_pay_load_size[] = { + 128, 256, 512, 1024, 2048, 4096, +}; + +static const u16 atl1c_rfd_prod_idx_regs[AT_MAX_RECEIVE_QUEUE] = +{ + REG_MB_RFD0_PROD_IDX, + REG_MB_RFD1_PROD_IDX, + REG_MB_RFD2_PROD_IDX, + REG_MB_RFD3_PROD_IDX +}; + +static const u16 atl1c_rfd_addr_lo_regs[AT_MAX_RECEIVE_QUEUE] = +{ + REG_RFD0_HEAD_ADDR_LO, + REG_RFD1_HEAD_ADDR_LO, + REG_RFD2_HEAD_ADDR_LO, + REG_RFD3_HEAD_ADDR_LO +}; + +static const u16 atl1c_rrd_addr_lo_regs[AT_MAX_RECEIVE_QUEUE] = +{ + REG_RRD0_HEAD_ADDR_LO, + REG_RRD1_HEAD_ADDR_LO, + REG_RRD2_HEAD_ADDR_LO, + REG_RRD3_HEAD_ADDR_LO +}; + +static const u32 atl1c_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | + NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP; + +/* + * atl1c_init_pcie - init PCIE module + */ +static void atl1c_reset_pcie(struct atl1c_hw *hw, u32 flag) +{ + u32 data; + u32 pci_cmd; + struct pci_dev *pdev = hw->adapter->pdev; + + AT_READ_REG(hw, PCI_COMMAND, &pci_cmd); + pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; + pci_cmd |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_IO); + AT_WRITE_REG(hw, PCI_COMMAND, pci_cmd); + + /* + * Clear any PowerSaveing Settings + */ + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + /* + * Mask some pcie error bits + */ + AT_READ_REG(hw, REG_PCIE_UC_SEVERITY, &data); + data &= ~PCIE_UC_SERVRITY_DLP; + data &= ~PCIE_UC_SERVRITY_FCP; + AT_WRITE_REG(hw, REG_PCIE_UC_SEVERITY, data); + + if (flag & ATL1C_PCIE_L0S_L1_DISABLE) + atl1c_disable_l0s_l1(hw); + if (flag & ATL1C_PCIE_PHY_RESET) + AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT); + else + AT_WRITE_REG(hw, REG_GPHY_CTRL, + GPHY_CTRL_DEFAULT | GPHY_CTRL_EXT_RESET); + + msleep(1); +} + +/* + * atl1c_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + */ +static inline void atl1c_irq_enable(struct atl1c_adapter *adapter) +{ + if (likely(atomic_dec_and_test(&adapter->irq_sem))) { + AT_WRITE_REG(&adapter->hw, REG_ISR, 0x7FFFFFFF); + AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask); + AT_WRITE_FLUSH(&adapter->hw); + } +} + +/* + * atl1c_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + */ +static inline void atl1c_irq_disable(struct atl1c_adapter *adapter) +{ + atomic_inc(&adapter->irq_sem); + AT_WRITE_REG(&adapter->hw, REG_IMR, 0); + AT_WRITE_FLUSH(&adapter->hw); + synchronize_irq(adapter->pdev->irq); +} + +/* + * atl1c_irq_reset - reset interrupt confiure on the NIC + * @adapter: board private structure + */ +static inline void atl1c_irq_reset(struct atl1c_adapter *adapter) +{ + atomic_set(&adapter->irq_sem, 1); + atl1c_irq_enable(adapter); +} + +/* + * atl1c_phy_config - Timer Call-back + * @data: pointer to netdev cast into an unsigned long + */ +static void atl1c_phy_config(unsigned long data) +{ + struct atl1c_adapter *adapter = (struct atl1c_adapter *) data; + struct atl1c_hw *hw = &adapter->hw; + unsigned long flags; + + spin_lock_irqsave(&adapter->mdio_lock, flags); + atl1c_restart_autoneg(hw); + spin_unlock_irqrestore(&adapter->mdio_lock, flags); +} + +void atl1c_reinit_locked(struct atl1c_adapter *adapter) +{ + + WARN_ON(in_interrupt()); + atl1c_down(adapter); + atl1c_up(adapter); + clear_bit(__AT_RESETTING, &adapter->flags); +} + +static void atl1c_reset_task(struct work_struct *work) +{ + struct atl1c_adapter *adapter; + struct net_device *netdev; + + adapter = container_of(work, struct atl1c_adapter, reset_task); + netdev = adapter->netdev; + + netif_device_detach(netdev); + atl1c_down(adapter); + atl1c_up(adapter); + netif_device_attach(netdev); +} + +static void atl1c_check_link_status(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + int err; + unsigned long flags; + u16 speed, duplex, phy_data; + + spin_lock_irqsave(&adapter->mdio_lock, flags); + /* MII_BMSR must read twise */ + atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); + atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); + spin_unlock_irqrestore(&adapter->mdio_lock, flags); + + if ((phy_data & BMSR_LSTATUS) == 0) { + /* link down */ + if (netif_carrier_ok(netdev)) { + hw->hibernate = true; + atl1c_set_aspm(hw, false); + if (atl1c_stop_mac(hw) != 0) + if (netif_msg_hw(adapter)) + dev_warn(&pdev->dev, + "stop mac failed\n"); + } + netif_carrier_off(netdev); + } else { + /* Link Up */ + hw->hibernate = false; + spin_lock_irqsave(&adapter->mdio_lock, flags); + err = atl1c_get_speed_and_duplex(hw, &speed, &duplex); + spin_unlock_irqrestore(&adapter->mdio_lock, flags); + if (unlikely(err)) + return; + /* link result is our setting */ + if (adapter->link_speed != speed || + adapter->link_duplex != duplex) { + adapter->link_speed = speed; + adapter->link_duplex = duplex; + atl1c_enable_tx_ctrl(hw); + atl1c_enable_rx_ctrl(hw); + atl1c_setup_mac_ctrl(adapter); + atl1c_set_aspm(hw, true); + if (netif_msg_link(adapter)) + dev_info(&pdev->dev, + "%s: %s NIC Link is Up<%d Mbps %s>\n", + atl1c_driver_name, netdev->name, + adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "Full Duplex" : "Half Duplex"); + } + if (!netif_carrier_ok(netdev)) + netif_carrier_on(netdev); + } +} + +/* + * atl1c_link_chg_task - deal with link change event Out of interrupt context + * @netdev: network interface device structure + */ +static void atl1c_link_chg_task(struct work_struct *work) +{ + struct atl1c_adapter *adapter; + + adapter = container_of(work, struct atl1c_adapter, link_chg_task); + atl1c_check_link_status(adapter); +} + +static void atl1c_link_chg_event(struct atl1c_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + u16 phy_data; + u16 link_up; + + spin_lock(&adapter->mdio_lock); + atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); + atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); + spin_unlock(&adapter->mdio_lock); + link_up = phy_data & BMSR_LSTATUS; + /* notify upper layer link down ASAP */ + if (!link_up) { + if (netif_carrier_ok(netdev)) { + /* old link state: Up */ + netif_carrier_off(netdev); + if (netif_msg_link(adapter)) + dev_info(&pdev->dev, + "%s: %s NIC Link is Down\n", + atl1c_driver_name, netdev->name); + adapter->link_speed = SPEED_0; + } + } + schedule_work(&adapter->link_chg_task); +} + +static void atl1c_del_timer(struct atl1c_adapter *adapter) +{ + del_timer_sync(&adapter->phy_config_timer); +} + +static void atl1c_cancel_work(struct atl1c_adapter *adapter) +{ + cancel_work_sync(&adapter->reset_task); + cancel_work_sync(&adapter->link_chg_task); +} + +/* + * atl1c_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + */ +static void atl1c_tx_timeout(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->reset_task); +} + +/* + * atl1c_set_multi - Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_multi entry point is called whenever the multicast address + * list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper multicast, + * promiscuous mode, and all-multi behavior. + */ +static void atl1c_set_multi(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + struct dev_mc_list *mc_ptr; + u32 mac_ctrl_data; + u32 hash_value; + + /* Check for Promiscuous and All Multicast modes */ + AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl_data); + + if (netdev->flags & IFF_PROMISC) { + mac_ctrl_data |= MAC_CTRL_PROMIS_EN; + } else if (netdev->flags & IFF_ALLMULTI) { + mac_ctrl_data |= MAC_CTRL_MC_ALL_EN; + mac_ctrl_data &= ~MAC_CTRL_PROMIS_EN; + } else { + mac_ctrl_data &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); + } + + AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); + + /* clear the old settings from the multicast hash table */ + AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0); + AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0); + + /* comoute mc addresses' hash value ,and put it into hash table */ + for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { + hash_value = atl1c_hash_mc_addr(hw, mc_ptr->dmi_addr); + atl1c_hash_set(hw, hash_value); + } +} + +static void atl1c_vlan_rx_register(struct net_device *netdev, + struct vlan_group *grp) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + u32 mac_ctrl_data = 0; + + if (netif_msg_pktdata(adapter)) + dev_dbg(&pdev->dev, "atl1c_vlan_rx_register\n"); + + atl1c_irq_disable(adapter); + + adapter->vlgrp = grp; + AT_READ_REG(&adapter->hw, REG_MAC_CTRL, &mac_ctrl_data); + + if (grp) { + /* enable VLAN tag insert/strip */ + mac_ctrl_data |= MAC_CTRL_RMV_VLAN; + } else { + /* disable VLAN tag insert/strip */ + mac_ctrl_data &= ~MAC_CTRL_RMV_VLAN; + } + + AT_WRITE_REG(&adapter->hw, REG_MAC_CTRL, mac_ctrl_data); + atl1c_irq_enable(adapter); +} + +static void atl1c_restore_vlan(struct atl1c_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + + if (netif_msg_pktdata(adapter)) + dev_dbg(&pdev->dev, "atl1c_restore_vlan !"); + atl1c_vlan_rx_register(adapter->netdev, adapter->vlgrp); +} +/* + * atl1c_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + */ +static int atl1c_set_mac_addr(struct net_device *netdev, void *p) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + if (netif_running(netdev)) + return -EBUSY; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); + + atl1c_hw_set_mac_addr(&adapter->hw); + + return 0; +} + +static void atl1c_set_rxbufsize(struct atl1c_adapter *adapter, + struct net_device *dev) +{ + int mtu = dev->mtu; + + adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ? + roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) : AT_RX_BUF_SIZE; +} +/* + * atl1c_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + */ +static int atl1c_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + int old_mtu = netdev->mtu; + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + + if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || + (max_frame > MAX_JUMBO_FRAME_SIZE)) { + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); + return -EINVAL; + } + /* set MTU */ + if (old_mtu != new_mtu && netif_running(netdev)) { + while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) + msleep(1); + netdev->mtu = new_mtu; + adapter->hw.max_frame_size = new_mtu; + atl1c_set_rxbufsize(adapter, netdev); + atl1c_down(adapter); + atl1c_up(adapter); + clear_bit(__AT_RESETTING, &adapter->flags); + if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) { + u32 phy_data; + + AT_READ_REG(&adapter->hw, 0x1414, &phy_data); + phy_data |= 0x10000000; + AT_WRITE_REG(&adapter->hw, 0x1414, phy_data); + } + + } + return 0; +} + +/* + * caller should hold mdio_lock + */ +static int atl1c_mdio_read(struct net_device *netdev, int phy_id, int reg_num) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + u16 result; + + atl1c_read_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, &result); + return result; +} + +static void atl1c_mdio_write(struct net_device *netdev, int phy_id, + int reg_num, int val) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + atl1c_write_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, val); +} + +/* + * atl1c_mii_ioctl - + * @netdev: + * @ifreq: + * @cmd: + */ +static int atl1c_mii_ioctl(struct net_device *netdev, + struct ifreq *ifr, int cmd) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + struct mii_ioctl_data *data = if_mii(ifr); + unsigned long flags; + int retval = 0; + + if (!netif_running(netdev)) + return -EINVAL; + + spin_lock_irqsave(&adapter->mdio_lock, flags); + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = 0; + break; + + case SIOCGMIIREG: + if (!capable(CAP_NET_ADMIN)) { + retval = -EPERM; + goto out; + } + if (atl1c_read_phy_reg(&adapter->hw, data->reg_num & 0x1F, + &data->val_out)) { + retval = -EIO; + goto out; + } + break; + + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) { + retval = -EPERM; + goto out; + } + if (data->reg_num & ~(0x1F)) { + retval = -EFAULT; + goto out; + } + + dev_dbg(&pdev->dev, "<atl1c_mii_ioctl> write %x %x", + data->reg_num, data->val_in); + if (atl1c_write_phy_reg(&adapter->hw, + data->reg_num, data->val_in)) { + retval = -EIO; + goto out; + } + break; + + default: + retval = -EOPNOTSUPP; + break; + } +out: + spin_unlock_irqrestore(&adapter->mdio_lock, flags); + return retval; +} + +/* + * atl1c_ioctl - + * @netdev: + * @ifreq: + * @cmd: + */ +static int atl1c_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + return atl1c_mii_ioctl(netdev, ifr, cmd); + default: + return -EOPNOTSUPP; + } +} + +/* + * atl1c_alloc_queues - Allocate memory for all rings + * @adapter: board private structure to initialize + * + */ +static int __devinit atl1c_alloc_queues(struct atl1c_adapter *adapter) +{ + return 0; +} + +static void atl1c_set_mac_type(struct atl1c_hw *hw) +{ + switch (hw->device_id) { + case PCI_DEVICE_ID_ATTANSIC_L2C: + hw->nic_type = athr_l2c; + break; + + case PCI_DEVICE_ID_ATTANSIC_L1C: + hw->nic_type = athr_l1c; + break; + + default: + break; + } +} + +static int atl1c_setup_mac_funcs(struct atl1c_hw *hw) +{ + u32 phy_status_data; + u32 link_ctrl_data; + + atl1c_set_mac_type(hw); + AT_READ_REG(hw, REG_PHY_STATUS, &phy_status_data); + AT_READ_REG(hw, REG_LINK_CTRL, &link_ctrl_data); + + hw->ctrl_flags = ATL1C_INTR_CLEAR_ON_READ | + ATL1C_INTR_MODRT_ENABLE | + ATL1C_RX_IPV6_CHKSUM | + ATL1C_TXQ_MODE_ENHANCE; + if (link_ctrl_data & LINK_CTRL_L0S_EN) + hw->ctrl_flags |= ATL1C_ASPM_L0S_SUPPORT; + if (link_ctrl_data & LINK_CTRL_L1_EN) + hw->ctrl_flags |= ATL1C_ASPM_L1_SUPPORT; + + if (hw->nic_type == athr_l1c) { + hw->ctrl_flags |= ATL1C_ASPM_CTRL_MON; + hw->ctrl_flags |= ATL1C_LINK_CAP_1000M; + } + return 0; +} +/* + * atl1c_sw_init - Initialize general software structures (struct atl1c_adapter) + * @adapter: board private structure to initialize + * + * atl1c_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + */ +static int __devinit atl1c_sw_init(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + + adapter->wol = 0; + adapter->link_speed = SPEED_0; + adapter->link_duplex = FULL_DUPLEX; + adapter->num_rx_queues = AT_DEF_RECEIVE_QUEUE; + adapter->tpd_ring[0].count = 1024; + adapter->rfd_ring[0].count = 512; + + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_id = pdev->subsystem_device; + + /* before link up, we assume hibernate is true */ + hw->hibernate = true; + hw->media_type = MEDIA_TYPE_AUTO_SENSOR; + if (atl1c_setup_mac_funcs(hw) != 0) { + dev_err(&pdev->dev, "set mac function pointers failed\n"); + return -1; + } + hw->intr_mask = IMR_NORMAL_MASK; + hw->phy_configured = false; + hw->preamble_len = 7; + hw->max_frame_size = adapter->netdev->mtu; + if (adapter->num_rx_queues < 2) { + hw->rss_type = atl1c_rss_disable; + hw->rss_mode = atl1c_rss_mode_disable; + } else { + hw->rss_type = atl1c_rss_ipv4; + hw->rss_mode = atl1c_rss_mul_que_mul_int; + hw->rss_hash_bits = 16; + } + hw->autoneg_advertised = ADVERTISED_Autoneg; + hw->indirect_tab = 0xE4E4E4E4; + hw->base_cpu = 0; + + hw->ict = 50000; /* 100ms */ + hw->smb_timer = 200000; /* 400ms */ + hw->cmb_tpd = 4; + hw->cmb_tx_timer = 1; /* 2 us */ + hw->rx_imt = 200; + hw->tx_imt = 1000; + + hw->tpd_burst = 5; + hw->rfd_burst = 8; + hw->dma_order = atl1c_dma_ord_out; + hw->dmar_block = atl1c_dma_req_1024; + hw->dmaw_block = atl1c_dma_req_1024; + hw->dmar_dly_cnt = 15; + hw->dmaw_dly_cnt = 4; + + if (atl1c_alloc_queues(adapter)) { + dev_err(&pdev->dev, "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + /* TODO */ + atl1c_set_rxbufsize(adapter, adapter->netdev); + atomic_set(&adapter->irq_sem, 1); + spin_lock_init(&adapter->mdio_lock); + spin_lock_init(&adapter->tx_lock); + set_bit(__AT_DOWN, &adapter->flags); + + return 0; +} + +/* + * atl1c_clean_tx_ring - Free Tx-skb + * @adapter: board private structure + */ +static void atl1c_clean_tx_ring(struct atl1c_adapter *adapter, + enum atl1c_trans_queue type) +{ + struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; + struct atl1c_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + u16 index, ring_count; + + ring_count = tpd_ring->count; + for (index = 0; index < ring_count; index++) { + buffer_info = &tpd_ring->buffer_info[index]; + if (buffer_info->state == ATL1_BUFFER_FREE) + continue; + if (buffer_info->dma) + pci_unmap_single(pdev, buffer_info->dma, + buffer_info->length, + PCI_DMA_TODEVICE); + if (buffer_info->skb) + dev_kfree_skb(buffer_info->skb); + buffer_info->dma = 0; + buffer_info->skb = NULL; + buffer_info->state = ATL1_BUFFER_FREE; + } + + /* Zero out Tx-buffers */ + memset(tpd_ring->desc, 0, sizeof(struct atl1c_tpd_desc) * + ring_count); + atomic_set(&tpd_ring->next_to_clean, 0); + tpd_ring->next_to_use = 0; +} + +/* + * atl1c_clean_rx_ring - Free rx-reservation skbs + * @adapter: board private structure + */ +static void atl1c_clean_rx_ring(struct atl1c_adapter *adapter) +{ + struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring; + struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring; + struct atl1c_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + int i, j; + + for (i = 0; i < adapter->num_rx_queues; i++) { + for (j = 0; j < rfd_ring[i].count; j++) { + buffer_info = &rfd_ring[i].buffer_info[j]; + if (buffer_info->state == ATL1_BUFFER_FREE) + continue; + if (buffer_info->dma) + pci_unmap_single(pdev, buffer_info->dma, + buffer_info->length, + PCI_DMA_FROMDEVICE); + if (buffer_info->skb) + dev_kfree_skb(buffer_info->skb); + buffer_info->state = ATL1_BUFFER_FREE; + buffer_info->skb = NULL; + } + /* zero out the descriptor ring */ + memset(rfd_ring[i].desc, 0, rfd_ring[i].size); + rfd_ring[i].next_to_clean = 0; + rfd_ring[i].next_to_use = 0; + rrd_ring[i].next_to_use = 0; + rrd_ring[i].next_to_clean = 0; + } +} + +/* + * Read / Write Ptr Initialize: + */ +static void atl1c_init_ring_ptrs(struct atl1c_adapter *adapter) +{ + struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring; + struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring; + struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring; + struct atl1c_buffer *buffer_info; + int i, j; + + for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) { + tpd_ring[i].next_to_use = 0; + atomic_set(&tpd_ring[i].next_to_clean, 0); + buffer_info = tpd_ring[i].buffer_info; + for (j = 0; j < tpd_ring->count; j++) + buffer_info[i].state = ATL1_BUFFER_FREE; + } + for (i = 0; i < adapter->num_rx_queues; i++) { + rfd_ring[i].next_to_use = 0; + rfd_ring[i].next_to_clean = 0; + rrd_ring[i].next_to_use = 0; + rrd_ring[i].next_to_clean = 0; + for (j = 0; j < rfd_ring[i].count; j++) { + buffer_info = &rfd_ring[i].buffer_info[j]; + buffer_info->state = ATL1_BUFFER_FREE; + } + } +} + +/* + * atl1c_free_ring_resources - Free Tx / RX descriptor Resources + * @adapter: board private structure + * + * Free all transmit software resources + */ +static void atl1c_free_ring_resources(struct atl1c_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + + pci_free_consistent(pdev, adapter->ring_header.size, + adapter->ring_header.desc, + adapter->ring_header.dma); + adapter->ring_header.desc = NULL; + + /* Note: just free tdp_ring.buffer_info, + * it contain rfd_ring.buffer_info, do not double free */ + if (adapter->tpd_ring[0].buffer_info) { + kfree(adapter->tpd_ring[0].buffer_info); + adapter->tpd_ring[0].buffer_info = NULL; + } +} + +/* + * atl1c_setup_mem_resources - allocate Tx / RX descriptor resources + * @adapter: board private structure + * + * Return 0 on success, negative on failure + */ +static int atl1c_setup_ring_resources(struct atl1c_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring; + struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring; + struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring; + struct atl1c_ring_header *ring_header = &adapter->ring_header; + int num_rx_queues = adapter->num_rx_queues; + int size; + int i; + int count = 0; + int rx_desc_count = 0; + u32 offset = 0; + + rrd_ring[0].count = rfd_ring[0].count; + for (i = 1; i < AT_MAX_TRANSMIT_QUEUE; i++) + tpd_ring[i].count = tpd_ring[0].count; + + for (i = 1; i < adapter->num_rx_queues; i++) + rfd_ring[i].count = rrd_ring[i].count = rfd_ring[0].count; + + /* 2 tpd queue, one high priority queue, + * another normal priority queue */ + size = sizeof(struct atl1c_buffer) * (tpd_ring->count * 2 + + rfd_ring->count * num_rx_queues); + tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); + if (unlikely(!tpd_ring->buffer_info)) { + dev_err(&pdev->dev, "kzalloc failed, size = %d\n", + size); + goto err_nomem; + } + for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) { + tpd_ring[i].buffer_info = + (struct atl1c_buffer *) (tpd_ring->buffer_info + count); + count += tpd_ring[i].count; + } + + for (i = 0; i < num_rx_queues; i++) { + rfd_ring[i].buffer_info = + (struct atl1c_buffer *) (tpd_ring->buffer_info + count); + count += rfd_ring[i].count; + rx_desc_count += rfd_ring[i].count; + } + /* + * real ring DMA buffer + * each ring/block may need up to 8 bytes for alignment, hence the + * additional bytes tacked onto the end. + */ + ring_header->size = size = + sizeof(struct atl1c_tpd_desc) * tpd_ring->count * 2 + + sizeof(struct atl1c_rx_free_desc) * rx_desc_count + + sizeof(struct atl1c_recv_ret_status) * rx_desc_count + + sizeof(struct atl1c_hw_stats) + + 8 * 4 + 8 * 2 * num_rx_queues; + + ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, + &ring_header->dma); + if (unlikely(!ring_header->desc)) { + dev_err(&pdev->dev, "pci_alloc_consistend failed\n"); + goto err_nomem; + } + memset(ring_header->desc, 0, ring_header->size); + /* init TPD ring */ + + tpd_ring[0].dma = roundup(ring_header->dma, 8); + offset = tpd_ring[0].dma - ring_header->dma; + for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) { + tpd_ring[i].dma = ring_header->dma + offset; + tpd_ring[i].desc = (u8 *) ring_header->desc + offset; + tpd_ring[i].size = + sizeof(struct atl1c_tpd_desc) * tpd_ring[i].count; + offset += roundup(tpd_ring[i].size, 8); + } + /* init RFD ring */ + for (i = 0; i < num_rx_queues; i++) { + rfd_ring[i].dma = ring_header->dma + offset; + rfd_ring[i].desc = (u8 *) ring_header->desc + offset; + rfd_ring[i].size = sizeof(struct atl1c_rx_free_desc) * + rfd_ring[i].count; + offset += roundup(rfd_ring[i].size, 8); + } + + /* init RRD ring */ + for (i = 0; i < num_rx_queues; i++) { + rrd_ring[i].dma = ring_header->dma + offset; + rrd_ring[i].desc = (u8 *) ring_header->desc + offset; + rrd_ring[i].size = sizeof(struct atl1c_recv_ret_status) * + rrd_ring[i].count; + offset += roundup(rrd_ring[i].size, 8); + } + + adapter->smb.dma = ring_header->dma + offset; + adapter->smb.smb = (u8 *)ring_header->desc + offset; + return 0; + +err_nomem: + kfree(tpd_ring->buffer_info); + return -ENOMEM; +} + +static void atl1c_configure_des_ring(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + struct atl1c_rfd_ring *rfd_ring = (struct atl1c_rfd_ring *) + adapter->rfd_ring; + struct atl1c_rrd_ring *rrd_ring = (struct atl1c_rrd_ring *) + adapter->rrd_ring; + struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *) + adapter->tpd_ring; + struct atl1c_cmb *cmb = (struct atl1c_cmb *) &adapter->cmb; + struct atl1c_smb *smb = (struct atl1c_smb *) &adapter->smb; + int i; + + /* TPD */ + AT_WRITE_REG(hw, REG_TX_BASE_ADDR_HI, + (u32)((tpd_ring[atl1c_trans_normal].dma & + AT_DMA_HI_ADDR_MASK) >> 32)); + /* just enable normal priority TX queue */ + AT_WRITE_REG(hw, REG_NTPD_HEAD_ADDR_LO, + (u32)(tpd_ring[atl1c_trans_normal].dma & + AT_DMA_LO_ADDR_MASK)); + AT_WRITE_REG(hw, REG_HTPD_HEAD_ADDR_LO, + (u32)(tpd_ring[atl1c_trans_high].dma & + AT_DMA_LO_ADDR_MASK)); + AT_WRITE_REG(hw, REG_TPD_RING_SIZE, + (u32)(tpd_ring[0].count & TPD_RING_SIZE_MASK)); + + + /* RFD */ + AT_WRITE_REG(hw, REG_RX_BASE_ADDR_HI, + (u32)((rfd_ring[0].dma & AT_DMA_HI_ADDR_MASK) >> 32)); + for (i = 0; i < adapter->num_rx_queues; i++) + AT_WRITE_REG(hw, atl1c_rfd_addr_lo_regs[i], + (u32)(rfd_ring[i].dma & AT_DMA_LO_ADDR_MASK)); + + AT_WRITE_REG(hw, REG_RFD_RING_SIZE, + rfd_ring[0].count & RFD_RING_SIZE_MASK); + AT_WRITE_REG(hw, REG_RX_BUF_SIZE, + adapter->rx_buffer_len & RX_BUF_SIZE_MASK); + + /* RRD */ + for (i = 0; i < adapter->num_rx_queues; i++) + AT_WRITE_REG(hw, atl1c_rrd_addr_lo_regs[i], + (u32)(rrd_ring[i].dma & AT_DMA_LO_ADDR_MASK)); + AT_WRITE_REG(hw, REG_RRD_RING_SIZE, + (rrd_ring[0].count & RRD_RING_SIZE_MASK)); + + /* CMB */ + AT_WRITE_REG(hw, REG_CMB_BASE_ADDR_LO, cmb->dma & AT_DMA_LO_ADDR_MASK); + + /* SMB */ + AT_WRITE_REG(hw, REG_SMB_BASE_ADDR_HI, + (u32)((smb->dma & AT_DMA_HI_ADDR_MASK) >> 32)); + AT_WRITE_REG(hw, REG_SMB_BASE_ADDR_LO, + (u32)(smb->dma & AT_DMA_LO_ADDR_MASK)); + /* Load all of base address above */ + AT_WRITE_REG(hw, REG_LOAD_PTR, 1); +} + +static void atl1c_configure_tx(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + u32 dev_ctrl_data; + u32 max_pay_load; + u16 tx_offload_thresh; + u32 txq_ctrl_data; + u32 extra_size = 0; /* Jumbo frame threshold in QWORD unit */ + + extra_size = ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN; + tx_offload_thresh = MAX_TX_OFFLOAD_THRESH; + AT_WRITE_REG(hw, REG_TX_TSO_OFFLOAD_THRESH, + (tx_offload_thresh >> 3) & TX_TSO_OFFLOAD_THRESH_MASK); + AT_READ_REG(hw, REG_DEVICE_CTRL, &dev_ctrl_data); + max_pay_load = (dev_ctrl_data >> DEVICE_CTRL_MAX_PAYLOAD_SHIFT) & + DEVICE_CTRL_MAX_PAYLOAD_MASK; + hw->dmaw_block = min(max_pay_load, hw->dmaw_block); + max_pay_load = (dev_ctrl_data >> DEVICE_CTRL_MAX_RREQ_SZ_SHIFT) & + DEVICE_CTRL_MAX_RREQ_SZ_MASK; + hw->dmar_block = min(max_pay_load, hw->dmar_block); + + txq_ctrl_data = (hw->tpd_burst & TXQ_NUM_TPD_BURST_MASK) << + TXQ_NUM_TPD_BURST_SHIFT; + if (hw->ctrl_flags & ATL1C_TXQ_MODE_ENHANCE) + txq_ctrl_data |= TXQ_CTRL_ENH_MODE; + txq_ctrl_data |= (atl1c_pay_load_size[hw->dmar_block] & + TXQ_TXF_BURST_NUM_MASK) << TXQ_TXF_BURST_NUM_SHIFT; + + AT_WRITE_REG(hw, REG_TXQ_CTRL, txq_ctrl_data); +} + +static void atl1c_configure_rx(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + u32 rxq_ctrl_data; + + rxq_ctrl_data = (hw->rfd_burst & RXQ_RFD_BURST_NUM_MASK) << + RXQ_RFD_BURST_NUM_SHIFT; + + if (hw->ctrl_flags & ATL1C_RX_IPV6_CHKSUM) + rxq_ctrl_data |= IPV6_CHKSUM_CTRL_EN; + if (hw->rss_type == atl1c_rss_ipv4) + rxq_ctrl_data |= RSS_HASH_IPV4; + if (hw->rss_type == atl1c_rss_ipv4_tcp) + rxq_ctrl_data |= RSS_HASH_IPV4_TCP; + if (hw->rss_type == atl1c_rss_ipv6) + rxq_ctrl_data |= RSS_HASH_IPV6; + if (hw->rss_type == atl1c_rss_ipv6_tcp) + rxq_ctrl_data |= RSS_HASH_IPV6_TCP; + if (hw->rss_type != atl1c_rss_disable) + rxq_ctrl_data |= RRS_HASH_CTRL_EN; + + rxq_ctrl_data |= (hw->rss_mode & RSS_MODE_MASK) << + RSS_MODE_SHIFT; + rxq_ctrl_data |= (hw->rss_hash_bits & RSS_HASH_BITS_MASK) << + RSS_HASH_BITS_SHIFT; + if (hw->ctrl_flags & ATL1C_ASPM_CTRL_MON) + rxq_ctrl_data |= (ASPM_THRUPUT_LIMIT_100M & + ASPM_THRUPUT_LIMIT_MASK) << ASPM_THRUPUT_LIMIT_SHIFT; + + AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq_ctrl_data); +} + +static void atl1c_configure_rss(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + + AT_WRITE_REG(hw, REG_IDT_TABLE, hw->indirect_tab); + AT_WRITE_REG(hw, REG_BASE_CPU_NUMBER, hw->base_cpu); +} + +static void atl1c_configure_dma(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + u32 dma_ctrl_data; + + dma_ctrl_data = DMA_CTRL_DMAR_REQ_PRI; + if (hw->ctrl_flags & ATL1C_CMB_ENABLE) + dma_ctrl_data |= DMA_CTRL_CMB_EN; + if (hw->ctrl_flags & ATL1C_SMB_ENABLE) + dma_ctrl_data |= DMA_CTRL_SMB_EN; + else + dma_ctrl_data |= MAC_CTRL_SMB_DIS; + + switch (hw->dma_order) { + case atl1c_dma_ord_in: + dma_ctrl_data |= DMA_CTRL_DMAR_IN_ORDER; + break; + case atl1c_dma_ord_enh: + dma_ctrl_data |= DMA_CTRL_DMAR_ENH_ORDER; + break; + case atl1c_dma_ord_out: + dma_ctrl_data |= DMA_CTRL_DMAR_OUT_ORDER; + break; + default: + break; + } + + dma_ctrl_data |= (((u32)hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) + << DMA_CTRL_DMAR_BURST_LEN_SHIFT; + dma_ctrl_data |= (((u32)hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) + << DMA_CTRL_DMAW_BURST_LEN_SHIFT; + dma_ctrl_data |= (((u32)hw->dmar_dly_cnt) & DMA_CTRL_DMAR_DLY_CNT_MASK) + << DMA_CTRL_DMAR_DLY_CNT_SHIFT; + dma_ctrl_data |= (((u32)hw->dmaw_dly_cnt) & DMA_CTRL_DMAW_DLY_CNT_MASK) + << DMA_CTRL_DMAW_DLY_CNT_SHIFT; + + AT_WRITE_REG(hw, REG_DMA_CTRL, dma_ctrl_data); +} + +/* + * Stop the mac, transmit and receive units + * hw - Struct containing variables accessed by shared code + * return : 0 or idle status (if error) + */ +static int atl1c_stop_mac(struct atl1c_hw *hw) +{ + u32 data; + int timeout; + + AT_READ_REG(hw, REG_RXQ_CTRL, &data); + data &= ~(RXQ1_CTRL_EN | RXQ2_CTRL_EN | + RXQ3_CTRL_EN | RXQ_CTRL_EN); + AT_WRITE_REG(hw, REG_RXQ_CTRL, data); + + AT_READ_REG(hw, REG_TXQ_CTRL, &data); + data &= ~TXQ_CTRL_EN; + AT_WRITE_REG(hw, REG_TWSI_CTRL, data); + + for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) { + AT_READ_REG(hw, REG_IDLE_STATUS, &data); + if ((data & (IDLE_STATUS_RXQ_NO_IDLE | + IDLE_STATUS_TXQ_NO_IDLE)) == 0) + break; + msleep(1); + } + + AT_READ_REG(hw, REG_MAC_CTRL, &data); + data &= ~(MAC_CTRL_TX_EN | MAC_CTRL_RX_EN); + AT_WRITE_REG(hw, REG_MAC_CTRL, data); + + for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) { + AT_READ_REG(hw, REG_IDLE_STATUS, &data); + if ((data & IDLE_STATUS_MASK) == 0) + return 0; + msleep(1); + } + return data; +} + +static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw) +{ + u32 data; + + AT_READ_REG(hw, REG_RXQ_CTRL, &data); + switch (hw->adapter->num_rx_queues) { + case 4: + data |= (RXQ3_CTRL_EN | RXQ2_CTRL_EN | RXQ1_CTRL_EN); + break; + case 3: + data |= (RXQ2_CTRL_EN | RXQ1_CTRL_EN); + break; + case 2: + data |= RXQ1_CTRL_EN; + break; + default: + break; + } + data |= RXQ_CTRL_EN; + AT_WRITE_REG(hw, REG_RXQ_CTRL, data); +} + +static void atl1c_enable_tx_ctrl(struct atl1c_hw *hw) +{ + u32 data; + + AT_READ_REG(hw, REG_TXQ_CTRL, &data); + data |= TXQ_CTRL_EN; + AT_WRITE_REG(hw, REG_TXQ_CTRL, data); +} + +/* + * Reset the transmit and receive units; mask and clear all interrupts. + * hw - Struct containing variables accessed by shared code + * return : 0 or idle status (if error) + */ +static int atl1c_reset_mac(struct atl1c_hw *hw) +{ + struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter; + struct pci_dev *pdev = adapter->pdev; + u32 idle_status_data = 0; + int timeout = 0; + int ret; + + AT_WRITE_REG(hw, REG_IMR, 0); + AT_WRITE_REG(hw, REG_ISR, ISR_DIS_INT); + + ret = atl1c_stop_mac(hw); + if (ret) + return ret; + /* + * Issue Soft Reset to the MAC. This will reset the chip's + * transmit, receive, DMA. It will not effect + * the current PCI configuration. The global reset bit is self- + * clearing, and should clear within a microsecond. + */ + AT_WRITE_REGW(hw, REG_MASTER_CTRL, MASTER_CTRL_SOFT_RST); + AT_WRITE_FLUSH(hw); + msleep(10); + /* Wait at least 10ms for All module to be Idle */ + for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) { + AT_READ_REG(hw, REG_IDLE_STATUS, &idle_status_data); + if ((idle_status_data & IDLE_STATUS_MASK) == 0) + break; + msleep(1); + } + if (timeout >= AT_HW_MAX_IDLE_DELAY) { + dev_err(&pdev->dev, + "MAC state machine cann't be idle since" + " disabled for 10ms second\n"); + return -1; + } + return 0; +} + +static void atl1c_disable_l0s_l1(struct atl1c_hw *hw) +{ + u32 pm_ctrl_data; + + AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data); + pm_ctrl_data &= ~(PM_CTRL_L1_ENTRY_TIMER_MASK << + PM_CTRL_L1_ENTRY_TIMER_SHIFT); + pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1; + pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN; + pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN; + pm_ctrl_data &= ~PM_CTRL_MAC_ASPM_CHK; + pm_ctrl_data &= ~PM_CTRL_SERDES_PD_EX_L1; + + pm_ctrl_data |= PM_CTRL_SERDES_BUDS_RX_L1_EN; + pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN; + pm_ctrl_data |= PM_CTRL_SERDES_L1_EN; + AT_WRITE_REG(hw, REG_PM_CTRL, pm_ctrl_data); +} + +/* + * Set ASPM state. + * Enable/disable L0s/L1 depend on link state. + */ +static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup) +{ + u32 pm_ctrl_data; + + AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data); + + pm_ctrl_data &= PM_CTRL_SERDES_PD_EX_L1; + pm_ctrl_data |= ~PM_CTRL_SERDES_BUDS_RX_L1_EN; + pm_ctrl_data |= ~PM_CTRL_SERDES_L1_EN; + pm_ctrl_data &= ~(PM_CTRL_L1_ENTRY_TIMER_MASK << + PM_CTRL_L1_ENTRY_TIMER_SHIFT); + + pm_ctrl_data |= PM_CTRL_MAC_ASPM_CHK; + + if (linkup) { + pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN; + pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1; + + if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT) { + pm_ctrl_data |= AT_ASPM_L1_TIMER << + PM_CTRL_L1_ENTRY_TIMER_SHIFT; + pm_ctrl_data |= PM_CTRL_ASPM_L1_EN; + } else + pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN; + + if (hw->ctrl_flags & ATL1C_ASPM_L0S_SUPPORT) + pm_ctrl_data |= PM_CTRL_ASPM_L0S_EN; + else + pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN; + + } else { + pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN; + pm_ctrl_data &= ~PM_CTRL_SERDES_PLL_L1_EN; + + pm_ctrl_data |= PM_CTRL_CLK_SWH_L1; + + if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT) + pm_ctrl_data |= PM_CTRL_ASPM_L1_EN; + else + pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN; + } + + AT_WRITE_REG(hw, REG_PM_CTRL, pm_ctrl_data); +} + +static void atl1c_setup_mac_ctrl(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 mac_ctrl_data; + + mac_ctrl_data = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN; + mac_ctrl_data |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); + + if (adapter->link_duplex == FULL_DUPLEX) { + hw->mac_duplex = true; + mac_ctrl_data |= MAC_CTRL_DUPLX; + } + + if (adapter->link_speed == SPEED_1000) + hw->mac_speed = atl1c_mac_speed_1000; + else + hw->mac_speed = atl1c_mac_speed_10_100; + + mac_ctrl_data |= (hw->mac_speed & MAC_CTRL_SPEED_MASK) << + MAC_CTRL_SPEED_SHIFT; + + mac_ctrl_data |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); + mac_ctrl_data |= ((hw->preamble_len & MAC_CTRL_PRMLEN_MASK) << + MAC_CTRL_PRMLEN_SHIFT); + + if (adapter->vlgrp) + mac_ctrl_data |= MAC_CTRL_RMV_VLAN; + + mac_ctrl_data |= MAC_CTRL_BC_EN; + if (netdev->flags & IFF_PROMISC) + mac_ctrl_data |= MAC_CTRL_PROMIS_EN; + if (netdev->flags & IFF_ALLMULTI) + mac_ctrl_data |= MAC_CTRL_MC_ALL_EN; + + mac_ctrl_data |= MAC_CTRL_SINGLE_PAUSE_EN; + AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); +} + +/* + * atl1c_configure - Configure Transmit&Receive Unit after Reset + * @adapter: board private structure + * + * Configure the Tx /Rx unit of the MAC after a reset. + */ +static int atl1c_configure(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + u32 master_ctrl_data = 0; + u32 intr_modrt_data; + + /* clear interrupt status */ + AT_WRITE_REG(hw, REG_ISR, 0xFFFFFFFF); + /* Clear any WOL status */ + AT_WRITE_REG(hw, REG_WOL_CTRL, 0); + /* set Interrupt Clear Timer + * HW will enable self to assert interrupt event to system after + * waiting x-time for software to notify it accept interrupt. + */ + AT_WRITE_REG(hw, REG_INT_RETRIG_TIMER, + hw->ict & INT_RETRIG_TIMER_MASK); + + atl1c_configure_des_ring(adapter); + + if (hw->ctrl_flags & ATL1C_INTR_MODRT_ENABLE) { + intr_modrt_data = (hw->tx_imt & IRQ_MODRT_TIMER_MASK) << + IRQ_MODRT_TX_TIMER_SHIFT; + intr_modrt_data |= (hw->rx_imt & IRQ_MODRT_TIMER_MASK) << + IRQ_MODRT_RX_TIMER_SHIFT; + AT_WRITE_REG(hw, REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data); + master_ctrl_data |= + MASTER_CTRL_TX_ITIMER_EN | MASTER_CTRL_RX_ITIMER_EN; + } + + if (hw->ctrl_flags & ATL1C_INTR_CLEAR_ON_READ) + master_ctrl_data |= MASTER_CTRL_INT_RDCLR; + + AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data); + + if (hw->ctrl_flags & ATL1C_CMB_ENABLE) { + AT_WRITE_REG(hw, REG_CMB_TPD_THRESH, + hw->cmb_tpd & CMB_TPD_THRESH_MASK); + AT_WRITE_REG(hw, REG_CMB_TX_TIMER, + hw->cmb_tx_timer & CMB_TX_TIMER_MASK); + } + + if (hw->ctrl_flags & ATL1C_SMB_ENABLE) + AT_WRITE_REG(hw, REG_SMB_STAT_TIMER, + hw->smb_timer & SMB_STAT_TIMER_MASK); + /* set MTU */ + AT_WRITE_REG(hw, REG_MTU, hw->max_frame_size + ETH_HLEN + + VLAN_HLEN + ETH_FCS_LEN); + /* HDS, disable */ + AT_WRITE_REG(hw, REG_HDS_CTRL, 0); + + atl1c_configure_tx(adapter); + atl1c_configure_rx(adapter); + atl1c_configure_rss(adapter); + atl1c_configure_dma(adapter); + + return 0; +} + +static void atl1c_update_hw_stats(struct atl1c_adapter *adapter) +{ + u16 hw_reg_addr = 0; + unsigned long *stats_item = NULL; + u32 data; + + /* update rx status */ + hw_reg_addr = REG_MAC_RX_STATUS_BIN; + stats_item = &adapter->hw_stats.rx_ok; + while (hw_reg_addr <= REG_MAC_RX_STATUS_END) { + AT_READ_REG(&adapter->hw, hw_reg_addr, &data); + *stats_item += data; + stats_item++; + hw_reg_addr += 4; + } +/* update tx status */ + hw_reg_addr = REG_MAC_TX_STATUS_BIN; + stats_item = &adapter->hw_stats.tx_ok; + while (hw_reg_addr <= REG_MAC_TX_STATUS_END) { + AT_READ_REG(&adapter->hw, hw_reg_addr, &data); + *stats_item += data; + stats_item++; + hw_reg_addr += 4; + } +} + +/* + * atl1c_get_stats - Get System Network Statistics + * @netdev: network interface device structure + * + * Returns the address of the device statistics structure. + * The statistics are actually updated from the timer callback. + */ +static struct net_device_stats *atl1c_get_stats(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw_stats *hw_stats = &adapter->hw_stats; + struct net_device_stats *net_stats = &adapter->net_stats; + + atl1c_update_hw_stats(adapter); + net_stats->rx_packets = hw_stats->rx_ok; + net_stats->tx_packets = hw_stats->tx_ok; + net_stats->rx_bytes = hw_stats->rx_byte_cnt; + net_stats->tx_bytes = hw_stats->tx_byte_cnt; + net_stats->multicast = hw_stats->rx_mcast; + net_stats->collisions = hw_stats->tx_1_col + + hw_stats->tx_2_col * 2 + + hw_stats->tx_late_col + hw_stats->tx_abort_col; + net_stats->rx_errors = hw_stats->rx_frag + hw_stats->rx_fcs_err + + hw_stats->rx_len_err + hw_stats->rx_sz_ov + + hw_stats->rx_rrd_ov + hw_stats->rx_align_err; + net_stats->rx_fifo_errors = hw_stats->rx_rxf_ov; + net_stats->rx_length_errors = hw_stats->rx_len_err; + net_stats->rx_crc_errors = hw_stats->rx_fcs_err; + net_stats->rx_frame_errors = hw_stats->rx_align_err; + net_stats->rx_over_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov; + + net_stats->rx_missed_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov; + + net_stats->tx_errors = hw_stats->tx_late_col + hw_stats->tx_abort_col + + hw_stats->tx_underrun + hw_stats->tx_trunc; + net_stats->tx_fifo_errors = hw_stats->tx_underrun; + net_stats->tx_aborted_errors = hw_stats->tx_abort_col; + net_stats->tx_window_errors = hw_stats->tx_late_col; + + return &adapter->net_stats; +} + +static inline void atl1c_clear_phy_int(struct atl1c_adapter *adapter) +{ + u16 phy_data; + + spin_lock(&adapter->mdio_lock); + atl1c_read_phy_reg(&adapter->hw, MII_ISR, &phy_data); + spin_unlock(&adapter->mdio_lock); +} + +static bool atl1c_clean_tx_irq(struct atl1c_adapter *adapter, + enum atl1c_trans_queue type) +{ + struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *) + &adapter->tpd_ring[type]; + struct atl1c_buffer *buffer_info; + u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); + u16 hw_next_to_clean; + u16 shift; + u32 data; + + if (type == atl1c_trans_high) + shift = MB_HTPD_CONS_IDX_SHIFT; + else + shift = MB_NTPD_CONS_IDX_SHIFT; + + AT_READ_REG(&adapter->hw, REG_MB_PRIO_CONS_IDX, &data); + hw_next_to_clean = (data >> shift) & MB_PRIO_PROD_IDX_MASK; + + while (next_to_clean != hw_next_to_clean) { + buffer_info = &tpd_ring->buffer_info[next_to_clean]; + if (buffer_info->state == ATL1_BUFFER_BUSY) { + pci_unmap_page(adapter->pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_TODEVICE); + buffer_info->dma = 0; + if (buffer_info->skb) { + dev_kfree_skb_irq(buffer_info->skb); + buffer_info->skb = NULL; + } + buffer_info->state = ATL1_BUFFER_FREE; + } + if (++next_to_clean == tpd_ring->count) + next_to_clean = 0; + atomic_set(&tpd_ring->next_to_clean, next_to_clean); + } + + if (netif_queue_stopped(adapter->netdev) && + netif_carrier_ok(adapter->netdev)) { + netif_wake_queue(adapter->netdev); + } + + return true; +} + +/* + * atl1c_intr - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + * @pt_regs: CPU registers structure + */ +static irqreturn_t atl1c_intr(int irq, void *data) +{ + struct net_device *netdev = data; + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + struct atl1c_hw *hw = &adapter->hw; + int max_ints = AT_MAX_INT_WORK; + int handled = IRQ_NONE; + u32 status; + u32 reg_data; + + do { + AT_READ_REG(hw, REG_ISR, ®_data); + status = reg_data & hw->intr_mask; + + if (status == 0 || (status & ISR_DIS_INT) != 0) { + if (max_ints != AT_MAX_INT_WORK) + handled = IRQ_HANDLED; + break; + } + /* link event */ + if (status & ISR_GPHY) + atl1c_clear_phy_int(adapter); + /* Ack ISR */ + AT_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT); + if (status & ISR_RX_PKT) { + if (likely(napi_schedule_prep(&adapter->napi))) { + hw->intr_mask &= ~ISR_RX_PKT; + AT_WRITE_REG(hw, REG_IMR, hw->intr_mask); + __napi_schedule(&adapter->napi); + } + } + if (status & ISR_TX_PKT) + atl1c_clean_tx_irq(adapter, atl1c_trans_normal); + + handled = IRQ_HANDLED; + /* check if PCIE PHY Link down */ + if (status & ISR_ERROR) { + if (netif_msg_hw(adapter)) + dev_err(&pdev->dev, + "atl1c hardware error (status = 0x%x)\n", + status & ISR_ERROR); + /* reset MAC */ + hw->intr_mask &= ~ISR_ERROR; + AT_WRITE_REG(hw, REG_IMR, hw->intr_mask); + schedule_work(&adapter->reset_task); + break; + } + + if (status & ISR_OVER) + if (netif_msg_intr(adapter)) + dev_warn(&pdev->dev, + "TX/RX over flow (status = 0x%x)\n", + status & ISR_OVER); + + /* link event */ + if (status & (ISR_GPHY | ISR_MANUAL)) { + adapter->net_stats.tx_carrier_errors++; + atl1c_link_chg_event(adapter); + break; + } + + } while (--max_ints > 0); + /* re-enable Interrupt*/ + AT_WRITE_REG(&adapter->hw, REG_ISR, 0); + return handled; +} + +static inline void atl1c_rx_checksum(struct atl1c_adapter *adapter, + struct sk_buff *skb, struct atl1c_recv_ret_status *prrs) +{ + /* + * The pid field in RRS in not correct sometimes, so we + * cannot figure out if the packet is fragmented or not, + * so we tell the KERNEL CHECKSUM_NONE + */ + skb->ip_summed = CHECKSUM_NONE; +} + +static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter, const int ringid) +{ + struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring[ringid]; + struct pci_dev *pdev = adapter->pdev; + struct atl1c_buffer *buffer_info, *next_info; + struct sk_buff *skb; + void *vir_addr = NULL; + u16 num_alloc = 0; + u16 rfd_next_to_use, next_next; + struct atl1c_rx_free_desc *rfd_desc; + + next_next = rfd_next_to_use = rfd_ring->next_to_use; + if (++next_next == rfd_ring->count) + next_next = 0; + buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; + next_info = &rfd_ring->buffer_info[next_next]; + + while (next_info->state == ATL1_BUFFER_FREE) { + rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use); + + skb = dev_alloc_skb(adapter->rx_buffer_len); + if (unlikely(!skb)) { + if (netif_msg_rx_err(adapter)) + dev_warn(&pdev->dev, "alloc rx buffer failed\n"); + break; + } + + /* + * Make buffer alignment 2 beyond a 16 byte boundary + * this will result in a 16 byte aligned IP header after + * the 14 byte MAC header is removed + */ + vir_addr = skb->data; + buffer_info->state = ATL1_BUFFER_BUSY; + buffer_info->skb = skb; + buffer_info->length = adapter->rx_buffer_len; + buffer_info->dma = pci_map_single(pdev, vir_addr, + buffer_info->length, + PCI_DMA_FROMDEVICE); + rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); + rfd_next_to_use = next_next; + if (++next_next == rfd_ring->count) + next_next = 0; + buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; + next_info = &rfd_ring->buffer_info[next_next]; + num_alloc++; + } + + if (num_alloc) { + /* TODO: update mailbox here */ + wmb(); + rfd_ring->next_to_use = rfd_next_to_use; + AT_WRITE_REG(&adapter->hw, atl1c_rfd_prod_idx_regs[ringid], + rfd_ring->next_to_use & MB_RFDX_PROD_IDX_MASK); + } + + return num_alloc; +} + +static void atl1c_clean_rrd(struct atl1c_rrd_ring *rrd_ring, + struct atl1c_recv_ret_status *rrs, u16 num) +{ + u16 i; + /* the relationship between rrd and rfd is one map one */ + for (i = 0; i < num; i++, rrs = ATL1C_RRD_DESC(rrd_ring, + rrd_ring->next_to_clean)) { + rrs->word3 &= ~RRS_RXD_UPDATED; + if (++rrd_ring->next_to_clean == rrd_ring->count) + rrd_ring->next_to_clean = 0; + } +} + +static void atl1c_clean_rfd(struct atl1c_rfd_ring *rfd_ring, + struct atl1c_recv_ret_status *rrs, u16 num) +{ + u16 i; + u16 rfd_index; + struct atl1c_buffer *buffer_info = rfd_ring->buffer_info; + + rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) & + RRS_RX_RFD_INDEX_MASK; + for (i = 0; i < num; i++) { + buffer_info[rfd_index].skb = NULL; + buffer_info[rfd_index].state = ATL1_BUFFER_FREE; + if (++rfd_index == rfd_ring->count) + rfd_index = 0; + } + rfd_ring->next_to_clean = rfd_index; +} + +static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, u8 que, + int *work_done, int work_to_do) +{ + u16 rfd_num, rfd_index; + u16 count = 0; + u16 length; + struct pci_dev *pdev = adapter->pdev; + struct net_device *netdev = adapter->netdev; + struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring[que]; + struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring[que]; + struct sk_buff *skb; + struct atl1c_recv_ret_status *rrs; + struct atl1c_buffer *buffer_info; + + while (1) { + if (*work_done >= work_to_do) + break; + rrs = ATL1C_RRD_DESC(rrd_ring, rrd_ring->next_to_clean); + if (likely(RRS_RXD_IS_VALID(rrs->word3))) { + rfd_num = (rrs->word0 >> RRS_RX_RFD_CNT_SHIFT) & + RRS_RX_RFD_CNT_MASK; + if (unlikely(rfd_num) != 1) + /* TODO support mul rfd*/ + if (netif_msg_rx_err(adapter)) + dev_warn(&pdev->dev, + "Multi rfd not support yet!\n"); + goto rrs_checked; + } else { + break; + } +rrs_checked: + atl1c_clean_rrd(rrd_ring, rrs, rfd_num); + if (rrs->word3 & (RRS_RX_ERR_SUM | RRS_802_3_LEN_ERR)) { + atl1c_clean_rfd(rfd_ring, rrs, rfd_num); + if (netif_msg_rx_err(adapter)) + dev_warn(&pdev->dev, + "wrong packet! rrs word3 is %x\n", + rrs->word3); + continue; + } + + length = le16_to_cpu((rrs->word3 >> RRS_PKT_SIZE_SHIFT) & + RRS_PKT_SIZE_MASK); + /* Good Receive */ + if (likely(rfd_num == 1)) { + rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) & + RRS_RX_RFD_INDEX_MASK; + buffer_info = &rfd_ring->buffer_info[rfd_index]; + pci_unmap_single(pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_FROMDEVICE); + skb = buffer_info->skb; + } else { + /* TODO */ + if (netif_msg_rx_err(adapter)) + dev_warn(&pdev->dev, + "Multi rfd not support yet!\n"); + break; + } + atl1c_clean_rfd(rfd_ring, rrs, rfd_num); + skb_put(skb, length - ETH_FCS_LEN); + skb->protocol = eth_type_trans(skb, netdev); + skb->dev = netdev; + atl1c_rx_checksum(adapter, skb, rrs); + if (unlikely(adapter->vlgrp) && rrs->word3 & RRS_VLAN_INS) { + u16 vlan; + + AT_TAG_TO_VLAN(rrs->vlan_tag, vlan); + vlan = le16_to_cpu(vlan); + vlan_hwaccel_receive_skb(skb, adapter->vlgrp, vlan); + } else + netif_receive_skb(skb); + + netdev->last_rx = jiffies; + (*work_done)++; + count++; + } + if (count) + atl1c_alloc_rx_buffer(adapter, que); +} + +/* + * atl1c_clean - NAPI Rx polling callback + * @adapter: board private structure + */ +static int atl1c_clean(struct napi_struct *napi, int budget) +{ + struct atl1c_adapter *adapter = + container_of(napi, struct atl1c_adapter, napi); + int work_done = 0; + + /* Keep link state information with original netdev */ + if (!netif_carrier_ok(adapter->netdev)) + goto quit_polling; + /* just enable one RXQ */ + atl1c_clean_rx_irq(adapter, 0, &work_done, budget); + + if (work_done < budget) { +quit_polling: + napi_complete(napi); + adapter->hw.intr_mask |= ISR_RX_PKT; + AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask); + } + return work_done; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER + +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void atl1c_netpoll(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + disable_irq(adapter->pdev->irq); + atl1c_intr(adapter->pdev->irq, netdev); + enable_irq(adapter->pdev->irq); +} +#endif + +static inline u16 atl1c_tpd_avail(struct atl1c_adapter *adapter, enum atl1c_trans_queue type) +{ + struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; + u16 next_to_use = 0; + u16 next_to_clean = 0; + + next_to_clean = atomic_read(&tpd_ring->next_to_clean); + next_to_use = tpd_ring->next_to_use; + + return (u16)(next_to_clean > next_to_use) ? + (next_to_clean - next_to_use - 1) : + (tpd_ring->count + next_to_clean - next_to_use - 1); +} + +/* + * get next usable tpd + * Note: should call atl1c_tdp_avail to make sure + * there is enough tpd to use + */ +static struct atl1c_tpd_desc *atl1c_get_tpd(struct atl1c_adapter *adapter, + enum atl1c_trans_queue type) +{ + struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; + struct atl1c_tpd_desc *tpd_desc; + u16 next_to_use = 0; + + next_to_use = tpd_ring->next_to_use; + if (++tpd_ring->next_to_use == tpd_ring->count) + tpd_ring->next_to_use = 0; + tpd_desc = ATL1C_TPD_DESC(tpd_ring, next_to_use); + memset(tpd_desc, 0, sizeof(struct atl1c_tpd_desc)); + return tpd_desc; +} + +static struct atl1c_buffer * +atl1c_get_tx_buffer(struct atl1c_adapter *adapter, struct atl1c_tpd_desc *tpd) +{ + struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring; + + return &tpd_ring->buffer_info[tpd - + (struct atl1c_tpd_desc *)tpd_ring->desc]; +} + +/* Calculate the transmit packet descript needed*/ +static u16 atl1c_cal_tpd_req(const struct sk_buff *skb) +{ + u16 tpd_req; + u16 proto_hdr_len = 0; + + tpd_req = skb_shinfo(skb)->nr_frags + 1; + + if (skb_is_gso(skb)) { + proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + if (proto_hdr_len < skb_headlen(skb)) + tpd_req++; + if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) + tpd_req++; + } + return tpd_req; +} + +static int atl1c_tso_csum(struct atl1c_adapter *adapter, + struct sk_buff *skb, + struct atl1c_tpd_desc **tpd, + enum atl1c_trans_queue type) +{ + struct pci_dev *pdev = adapter->pdev; + u8 hdr_len; + u32 real_len; + unsigned short offload_type; + int err; + + if (skb_is_gso(skb)) { + if (skb_header_cloned(skb)) { + err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (unlikely(err)) + return -1; + } + offload_type = skb_shinfo(skb)->gso_type; + + if (offload_type & SKB_GSO_TCPV4) { + real_len = (((unsigned char *)ip_hdr(skb) - skb->data) + + ntohs(ip_hdr(skb)->tot_len)); + + if (real_len < skb->len) + pskb_trim(skb, real_len); + + hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); + if (unlikely(skb->len == hdr_len)) { + /* only xsum need */ + if (netif_msg_tx_queued(adapter)) + dev_warn(&pdev->dev, + "IPV4 tso with zero data??\n"); + goto check_sum; + } else { + ip_hdr(skb)->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic( + ip_hdr(skb)->saddr, + ip_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + (*tpd)->word1 |= 1 << TPD_IPV4_PACKET_SHIFT; + } + } + + if (offload_type & SKB_GSO_TCPV6) { + struct atl1c_tpd_ext_desc *etpd = + *(struct atl1c_tpd_ext_desc **)(tpd); + + memset(etpd, 0, sizeof(struct atl1c_tpd_ext_desc)); + *tpd = atl1c_get_tpd(adapter, type); + ipv6_hdr(skb)->payload_len = 0; + /* check payload == 0 byte ? */ + hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); + if (unlikely(skb->len == hdr_len)) { + /* only xsum need */ + if (netif_msg_tx_queued(adapter)) + dev_warn(&pdev->dev, + "IPV6 tso with zero data??\n"); + goto check_sum; + } else + tcp_hdr(skb)->check = ~csum_ipv6_magic( + &ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + etpd->word1 |= 1 << TPD_LSO_EN_SHIFT; + etpd->word1 |= 1 << TPD_LSO_VER_SHIFT; + etpd->pkt_len = cpu_to_le32(skb->len); + (*tpd)->word1 |= 1 << TPD_LSO_VER_SHIFT; + } + + (*tpd)->word1 |= 1 << TPD_LSO_EN_SHIFT; + (*tpd)->word1 |= (skb_transport_offset(skb) & TPD_TCPHDR_OFFSET_MASK) << + TPD_TCPHDR_OFFSET_SHIFT; + (*tpd)->word1 |= (skb_shinfo(skb)->gso_size & TPD_MSS_MASK) << + TPD_MSS_SHIFT; + return 0; + } + +check_sum: + if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { + u8 css, cso; + cso = skb_transport_offset(skb); + + if (unlikely(cso & 0x1)) { + if (netif_msg_tx_err(adapter)) + dev_err(&adapter->pdev->dev, + "payload offset should not an event number\n"); + return -1; + } else { + css = cso + skb->csum_offset; + + (*tpd)->word1 |= ((cso >> 1) & TPD_PLOADOFFSET_MASK) << + TPD_PLOADOFFSET_SHIFT; + (*tpd)->word1 |= ((css >> 1) & TPD_CCSUM_OFFSET_MASK) << + TPD_CCSUM_OFFSET_SHIFT; + (*tpd)->word1 |= 1 << TPD_CCSUM_EN_SHIFT; + } + } + return 0; +} + +static void atl1c_tx_map(struct atl1c_adapter *adapter, + struct sk_buff *skb, struct atl1c_tpd_desc *tpd, + enum atl1c_trans_queue type) +{ + struct atl1c_tpd_desc *use_tpd = NULL; + struct atl1c_buffer *buffer_info = NULL; + u16 buf_len = skb_headlen(skb); + u16 map_len = 0; + u16 mapped_len = 0; + u16 hdr_len = 0; + u16 nr_frags; + u16 f; + int tso; + + nr_frags = skb_shinfo(skb)->nr_frags; + tso = (tpd->word1 >> TPD_LSO_EN_SHIFT) & TPD_LSO_EN_MASK; + if (tso) { + /* TSO */ + map_len = hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + use_tpd = tpd; + + buffer_info = atl1c_get_tx_buffer(adapter, use_tpd); + buffer_info->length = map_len; + buffer_info->dma = pci_map_single(adapter->pdev, + skb->data, hdr_len, PCI_DMA_TODEVICE); + buffer_info->state = ATL1_BUFFER_BUSY; + mapped_len += map_len; + use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma); + use_tpd->buffer_len = cpu_to_le16(buffer_info->length); + } + + if (mapped_len < buf_len) { + /* mapped_len == 0, means we should use the first tpd, + which is given by caller */ + if (mapped_len == 0) + use_tpd = tpd; + else { + use_tpd = atl1c_get_tpd(adapter, type); + memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc)); + use_tpd = atl1c_get_tpd(adapter, type); + memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc)); + } + buffer_info = atl1c_get_tx_buffer(adapter, use_tpd); + buffer_info->length = buf_len - mapped_len; + buffer_info->dma = + pci_map_single(adapter->pdev, skb->data + mapped_len, + buffer_info->length, PCI_DMA_TODEVICE); + buffer_info->state = ATL1_BUFFER_BUSY; + + use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma); + use_tpd->buffer_len = cpu_to_le16(buffer_info->length); + } + + for (f = 0; f < nr_frags; f++) { + struct skb_frag_struct *frag; + + frag = &skb_shinfo(skb)->frags[f]; + + use_tpd = atl1c_get_tpd(adapter, type); + memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc)); + + buffer_info = atl1c_get_tx_buffer(adapter, use_tpd); + buffer_info->length = frag->size; + buffer_info->dma = + pci_map_page(adapter->pdev, frag->page, + frag->page_offset, + buffer_info->length, + PCI_DMA_TODEVICE); + buffer_info->state = ATL1_BUFFER_BUSY; + + use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma); + use_tpd->buffer_len = cpu_to_le16(buffer_info->length); + } + + /* The last tpd */ + use_tpd->word1 |= 1 << TPD_EOP_SHIFT; + /* The last buffer info contain the skb address, + so it will be free after unmap */ + buffer_info->skb = skb; +} + +static void atl1c_tx_queue(struct atl1c_adapter *adapter, struct sk_buff *skb, + struct atl1c_tpd_desc *tpd, enum atl1c_trans_queue type) +{ + struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; + u32 prod_data; + + AT_READ_REG(&adapter->hw, REG_MB_PRIO_PROD_IDX, &prod_data); + switch (type) { + case atl1c_trans_high: + prod_data &= 0xFFFF0000; + prod_data |= tpd_ring->next_to_use & 0xFFFF; + break; + case atl1c_trans_normal: + prod_data &= 0x0000FFFF; + prod_data |= (tpd_ring->next_to_use & 0xFFFF) << 16; + break; + default: + break; + } + wmb(); + AT_WRITE_REG(&adapter->hw, REG_MB_PRIO_PROD_IDX, prod_data); +} + +static int atl1c_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + unsigned long flags; + u16 tpd_req = 1; + struct atl1c_tpd_desc *tpd; + enum atl1c_trans_queue type = atl1c_trans_normal; + + if (test_bit(__AT_DOWN, &adapter->flags)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + tpd_req = atl1c_cal_tpd_req(skb); + if (!spin_trylock_irqsave(&adapter->tx_lock, flags)) { + if (netif_msg_pktdata(adapter)) + dev_info(&adapter->pdev->dev, "tx locked\n"); + return NETDEV_TX_LOCKED; + } + if (skb->mark == 0x01) + type = atl1c_trans_high; + else + type = atl1c_trans_normal; + + if (atl1c_tpd_avail(adapter, type) < tpd_req) { + /* no enough descriptor, just stop queue */ + netif_stop_queue(netdev); + spin_unlock_irqrestore(&adapter->tx_lock, flags); + return NETDEV_TX_BUSY; + } + + tpd = atl1c_get_tpd(adapter, type); + + /* do TSO and check sum */ + if (atl1c_tso_csum(adapter, skb, &tpd, type) != 0) { + spin_unlock_irqrestore(&adapter->tx_lock, flags); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) { + u16 vlan = vlan_tx_tag_get(skb); + __le16 tag; + + vlan = cpu_to_le16(vlan); + AT_VLAN_TO_TAG(vlan, tag); + tpd->word1 |= 1 << TPD_INS_VTAG_SHIFT; + tpd->vlan_tag = tag; + } + + if (skb_network_offset(skb) != ETH_HLEN) + tpd->word1 |= 1 << TPD_ETH_TYPE_SHIFT; /* Ethernet frame */ + + atl1c_tx_map(adapter, skb, tpd, type); + atl1c_tx_queue(adapter, skb, tpd, type); + + netdev->trans_start = jiffies; + spin_unlock_irqrestore(&adapter->tx_lock, flags); + return NETDEV_TX_OK; +} + +static void atl1c_free_irq(struct atl1c_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + free_irq(adapter->pdev->irq, netdev); + + if (adapter->have_msi) + pci_disable_msi(adapter->pdev); +} + +static int atl1c_request_irq(struct atl1c_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct net_device *netdev = adapter->netdev; + int flags = 0; + int err = 0; + + adapter->have_msi = true; + err = pci_enable_msi(adapter->pdev); + if (err) { + if (netif_msg_ifup(adapter)) + dev_err(&pdev->dev, + "Unable to allocate MSI interrupt Error: %d\n", + err); + adapter->have_msi = false; + } else + netdev->irq = pdev->irq; + + if (!adapter->have_msi) + flags |= IRQF_SHARED; + err = request_irq(adapter->pdev->irq, &atl1c_intr, flags, + netdev->name, netdev); + if (err) { + if (netif_msg_ifup(adapter)) + dev_err(&pdev->dev, + "Unable to allocate interrupt Error: %d\n", + err); + if (adapter->have_msi) + pci_disable_msi(adapter->pdev); + return err; + } + if (netif_msg_ifup(adapter)) + dev_dbg(&pdev->dev, "atl1c_request_irq OK\n"); + return err; +} + +int atl1c_up(struct atl1c_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int num; + int err; + int i; + + netif_carrier_off(netdev); + atl1c_init_ring_ptrs(adapter); + atl1c_set_multi(netdev); + atl1c_restore_vlan(adapter); + + for (i = 0; i < adapter->num_rx_queues; i++) { + num = atl1c_alloc_rx_buffer(adapter, i); + if (unlikely(num == 0)) { + err = -ENOMEM; + goto err_alloc_rx; + } + } + + if (atl1c_configure(adapter)) { + err = -EIO; + goto err_up; + } + + err = atl1c_request_irq(adapter); + if (unlikely(err)) + goto err_up; + + clear_bit(__AT_DOWN, &adapter->flags); + napi_enable(&adapter->napi); + atl1c_irq_enable(adapter); + atl1c_check_link_status(adapter); + netif_start_queue(netdev); + return err; + +err_up: +err_alloc_rx: + atl1c_clean_rx_ring(adapter); + return err; +} + +void atl1c_down(struct atl1c_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + atl1c_del_timer(adapter); + atl1c_cancel_work(adapter); + + /* signal that we're down so the interrupt handler does not + * reschedule our watchdog timer */ + set_bit(__AT_DOWN, &adapter->flags); + netif_carrier_off(netdev); + napi_disable(&adapter->napi); + atl1c_irq_disable(adapter); + atl1c_free_irq(adapter); + AT_WRITE_REG(&adapter->hw, REG_ISR, ISR_DIS_INT); + /* reset MAC to disable all RX/TX */ + atl1c_reset_mac(&adapter->hw); + msleep(1); + + adapter->link_speed = SPEED_0; + adapter->link_duplex = -1; + atl1c_clean_tx_ring(adapter, atl1c_trans_normal); + atl1c_clean_tx_ring(adapter, atl1c_trans_high); + atl1c_clean_rx_ring(adapter); +} + +/* + * atl1c_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + */ +static int atl1c_open(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + int err; + + /* disallow open during test */ + if (test_bit(__AT_TESTING, &adapter->flags)) + return -EBUSY; + + /* allocate rx/tx dma buffer & descriptors */ + err = atl1c_setup_ring_resources(adapter); + if (unlikely(err)) + return err; + + err = atl1c_up(adapter); + if (unlikely(err)) + goto err_up; + + if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) { + u32 phy_data; + + AT_READ_REG(&adapter->hw, REG_MDIO_CTRL, &phy_data); + phy_data |= MDIO_AP_EN; + AT_WRITE_REG(&adapter->hw, REG_MDIO_CTRL, phy_data); + } + return 0; + +err_up: + atl1c_free_irq(adapter); + atl1c_free_ring_resources(adapter); + atl1c_reset_mac(&adapter->hw); + return err; +} + +/* + * atl1c_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + */ +static int atl1c_close(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + WARN_ON(test_bit(__AT_RESETTING, &adapter->flags)); + atl1c_down(adapter); + atl1c_free_ring_resources(adapter); + return 0; +} + +static int atl1c_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + u32 ctrl; + u32 mac_ctrl_data; + u32 master_ctrl_data; + u32 wol_ctrl_data; + u16 mii_bmsr_data; + u16 save_autoneg_advertised; + u16 mii_intr_status_data; + u32 wufc = adapter->wol; + u32 i; + int retval = 0; + + if (netif_running(netdev)) { + WARN_ON(test_bit(__AT_RESETTING, &adapter->flags)); + atl1c_down(adapter); + } + netif_device_detach(netdev); + atl1c_disable_l0s_l1(hw); + retval = pci_save_state(pdev); + if (retval) + return retval; + if (wufc) { + AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl_data); + master_ctrl_data &= ~MASTER_CTRL_CLK_SEL_DIS; + + /* get link status */ + atl1c_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data); + atl1c_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data); + save_autoneg_advertised = hw->autoneg_advertised; + hw->autoneg_advertised = ADVERTISED_10baseT_Half; + if (atl1c_restart_autoneg(hw) != 0) + if (netif_msg_link(adapter)) + dev_warn(&pdev->dev, "phy autoneg failed\n"); + hw->phy_configured = false; /* re-init PHY when resume */ + hw->autoneg_advertised = save_autoneg_advertised; + /* turn on magic packet wol */ + if (wufc & AT_WUFC_MAG) + wol_ctrl_data = WOL_MAGIC_EN | WOL_MAGIC_PME_EN; + + if (wufc & AT_WUFC_LNKC) { + for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) { + msleep(100); + atl1c_read_phy_reg(hw, MII_BMSR, + (u16 *)&mii_bmsr_data); + if (mii_bmsr_data & BMSR_LSTATUS) + break; + } + if ((mii_bmsr_data & BMSR_LSTATUS) == 0) + if (netif_msg_link(adapter)) + dev_warn(&pdev->dev, + "%s: Link may change" + "when suspend\n", + atl1c_driver_name); + wol_ctrl_data |= WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN; + /* only link up can wake up */ + if (atl1c_write_phy_reg(hw, MII_IER, IER_LINK_UP) != 0) { + if (netif_msg_link(adapter)) + dev_err(&pdev->dev, + "%s: read write phy " + "register failed.\n", + atl1c_driver_name); + goto wol_dis; + } + } + /* clear phy interrupt */ + atl1c_read_phy_reg(hw, MII_ISR, &mii_intr_status_data); + /* Config MAC Ctrl register */ + mac_ctrl_data = MAC_CTRL_RX_EN; + /* set to 10/100M halt duplex */ + mac_ctrl_data |= atl1c_mac_speed_10_100 << MAC_CTRL_SPEED_SHIFT; + mac_ctrl_data |= (((u32)adapter->hw.preamble_len & + MAC_CTRL_PRMLEN_MASK) << + MAC_CTRL_PRMLEN_SHIFT); + + if (adapter->vlgrp) + mac_ctrl_data |= MAC_CTRL_RMV_VLAN; + + /* magic packet maybe Broadcast&multicast&Unicast frame */ + if (wufc & AT_WUFC_MAG) + mac_ctrl_data |= MAC_CTRL_BC_EN; + + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, + "%s: suspend MAC=0x%x\n", + atl1c_driver_name, mac_ctrl_data); + AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data); + AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data); + AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); + + /* pcie patch */ + AT_READ_REG(hw, REG_PCIE_PHYMISC, &ctrl); + ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; + AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl); + + pci_enable_wake(pdev, pci_choose_state(pdev, state), 1); + goto suspend_exit; + } +wol_dis: + + /* WOL disabled */ + AT_WRITE_REG(hw, REG_WOL_CTRL, 0); + + /* pcie patch */ + AT_READ_REG(hw, REG_PCIE_PHYMISC, &ctrl); + ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; + AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl); + + atl1c_phy_disable(hw); + hw->phy_configured = false; /* re-init PHY when resume */ + + pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); +suspend_exit: + + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int atl1c_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1c_adapter *adapter = netdev_priv(netdev); + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0); + + atl1c_phy_reset(&adapter->hw); + atl1c_reset_mac(&adapter->hw); + netif_device_attach(netdev); + if (netif_running(netdev)) + atl1c_up(adapter); + + return 0; +} + +static void atl1c_shutdown(struct pci_dev *pdev) +{ + atl1c_suspend(pdev, PMSG_SUSPEND); +} + +static const struct net_device_ops atl1c_netdev_ops = { + .ndo_open = atl1c_open, + .ndo_stop = atl1c_close, + .ndo_validate_addr = eth_validate_addr, + .ndo_start_xmit = atl1c_xmit_frame, + .ndo_set_mac_address = atl1c_set_mac_addr, + .ndo_set_multicast_list = atl1c_set_multi, + .ndo_change_mtu = atl1c_change_mtu, + .ndo_do_ioctl = atl1c_ioctl, + .ndo_tx_timeout = atl1c_tx_timeout, + .ndo_get_stats = atl1c_get_stats, + .ndo_vlan_rx_register = atl1c_vlan_rx_register, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = atl1c_netpoll, +#endif +}; + +static int atl1c_init_netdev(struct net_device *netdev, struct pci_dev *pdev) +{ + SET_NETDEV_DEV(netdev, &pdev->dev); + pci_set_drvdata(pdev, netdev); + + netdev->irq = pdev->irq; + netdev->netdev_ops = &atl1c_netdev_ops; + netdev->watchdog_timeo = AT_TX_WATCHDOG; + atl1c_set_ethtool_ops(netdev); + + /* TODO: add when ready */ + netdev->features = NETIF_F_SG | + NETIF_F_HW_CSUM | + NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_RX | + NETIF_F_TSO | + NETIF_F_TSO6; + return 0; +} + +/* + * atl1c_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in atl1c_pci_tbl + * + * Returns 0 on success, negative on failure + * + * atl1c_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + */ +static int __devinit atl1c_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct atl1c_adapter *adapter; + static int cards_found; + + int err = 0; + + /* enable device (incl. PCI PM wakeup and hotplug setup) */ + err = pci_enable_device_mem(pdev); + if (err) { + dev_err(&pdev->dev, "cannot enable PCI device\n"); + return err; + } + + /* + * The atl1c chip can DMA to 64-bit addresses, but it uses a single + * shared register for the high 32 bits, so only a single, aligned, + * 4 GB physical address range can be used at a time. + * + * Supporting 64-bit DMA on this hardware is more trouble than it's + * worth. It is far easier to limit to 32-bit DMA than update + * various kernel subsystems to support the mechanics required by a + * fixed-high-32-bit system. + */ + if ((pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) || + (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) != 0)) { + dev_err(&pdev->dev, "No usable DMA configuration,aborting\n"); + goto err_dma; + } + + err = pci_request_regions(pdev, atl1c_driver_name); + if (err) { + dev_err(&pdev->dev, "cannot obtain PCI resources\n"); + goto err_pci_reg; + } + + pci_set_master(pdev); + + netdev = alloc_etherdev(sizeof(struct atl1c_adapter)); + if (netdev == NULL) { + err = -ENOMEM; + dev_err(&pdev->dev, "etherdev alloc failed\n"); + goto err_alloc_etherdev; + } + + err = atl1c_init_netdev(netdev, pdev); + if (err) { + dev_err(&pdev->dev, "init netdevice failed\n"); + goto err_init_netdev; + } + adapter = netdev_priv(netdev); + adapter->bd_number = cards_found; + adapter->netdev = netdev; + adapter->pdev = pdev; + adapter->hw.adapter = adapter; + adapter->msg_enable = netif_msg_init(-1, atl1c_default_msg); + adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); + if (!adapter->hw.hw_addr) { + err = -EIO; + dev_err(&pdev->dev, "cannot map device registers\n"); + goto err_ioremap; + } + netdev->base_addr = (unsigned long)adapter->hw.hw_addr; + + /* init mii data */ + adapter->mii.dev = netdev; + adapter->mii.mdio_read = atl1c_mdio_read; + adapter->mii.mdio_write = atl1c_mdio_write; + adapter->mii.phy_id_mask = 0x1f; + adapter->mii.reg_num_mask = MDIO_REG_ADDR_MASK; + netif_napi_add(netdev, &adapter->napi, atl1c_clean, 64); + setup_timer(&adapter->phy_config_timer, atl1c_phy_config, + (unsigned long)adapter); + /* setup the private structure */ + err = atl1c_sw_init(adapter); + if (err) { + dev_err(&pdev->dev, "net device private data init failed\n"); + goto err_sw_init; + } + atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE | + ATL1C_PCIE_PHY_RESET); + + /* Init GPHY as early as possible due to power saving issue */ + atl1c_phy_reset(&adapter->hw); + + err = atl1c_reset_mac(&adapter->hw); + if (err) { + err = -EIO; + goto err_reset; + } + + device_init_wakeup(&pdev->dev, 1); + /* reset the controller to + * put the device in a known good starting state */ + err = atl1c_phy_init(&adapter->hw); + if (err) { + err = -EIO; + goto err_reset; + } + if (atl1c_read_mac_addr(&adapter->hw) != 0) { + err = -EIO; + dev_err(&pdev->dev, "get mac address failed\n"); + goto err_eeprom; + } + memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); + memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len); + if (netif_msg_probe(adapter)) + dev_dbg(&pdev->dev, + "mac address : %02x-%02x-%02x-%02x-%02x-%02x\n", + adapter->hw.mac_addr[0], adapter->hw.mac_addr[1], + adapter->hw.mac_addr[2], adapter->hw.mac_addr[3], + adapter->hw.mac_addr[4], adapter->hw.mac_addr[5]); + + atl1c_hw_set_mac_addr(&adapter->hw); + INIT_WORK(&adapter->reset_task, atl1c_reset_task); + INIT_WORK(&adapter->link_chg_task, atl1c_link_chg_task); + err = register_netdev(netdev); + if (err) { + dev_err(&pdev->dev, "register netdevice failed\n"); + goto err_register; + } + + if (netif_msg_probe(adapter)) + dev_info(&pdev->dev, "version %s\n", ATL1C_DRV_VERSION); + cards_found++; + return 0; + +err_reset: +err_register: +err_sw_init: +err_eeprom: + iounmap(adapter->hw.hw_addr); +err_init_netdev: +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_regions(pdev); +err_pci_reg: +err_dma: + pci_disable_device(pdev); + return err; +} + +/* + * atl1c_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * atl1c_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + */ +static void __devexit atl1c_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1c_adapter *adapter = netdev_priv(netdev); + + unregister_netdev(netdev); + atl1c_phy_disable(&adapter->hw); + + iounmap(adapter->hw.hw_addr); + + pci_release_regions(pdev); + pci_disable_device(pdev); + free_netdev(netdev); +} + +/* + * atl1c_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t atl1c_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1c_adapter *adapter = netdev_priv(netdev); + + netif_device_detach(netdev); + + if (netif_running(netdev)) + atl1c_down(adapter); + + pci_disable_device(pdev); + + /* Request a slot slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/* + * atl1c_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. Implementation + * resembles the first-half of the e1000_resume routine. + */ +static pci_ers_result_t atl1c_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1c_adapter *adapter = netdev_priv(netdev); + + if (pci_enable_device(pdev)) { + if (netif_msg_hw(adapter)) + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + pci_set_master(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + atl1c_reset_mac(&adapter->hw); + + return PCI_ERS_RESULT_RECOVERED; +} + +/* + * atl1c_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. Implementation resembles the + * second-half of the atl1c_resume routine. + */ +static void atl1c_io_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1c_adapter *adapter = netdev_priv(netdev); + + if (netif_running(netdev)) { + if (atl1c_up(adapter)) { + if (netif_msg_hw(adapter)) + dev_err(&pdev->dev, + "Cannot bring device back up after reset\n"); + return; + } + } + + netif_device_attach(netdev); +} + +static struct pci_error_handlers atl1c_err_handler = { + .error_detected = atl1c_io_error_detected, + .slot_reset = atl1c_io_slot_reset, + .resume = atl1c_io_resume, +}; + +static struct pci_driver atl1c_driver = { + .name = atl1c_driver_name, + .id_table = atl1c_pci_tbl, + .probe = atl1c_probe, + .remove = __devexit_p(atl1c_remove), + /* Power Managment Hooks */ + .suspend = atl1c_suspend, + .resume = atl1c_resume, + .shutdown = atl1c_shutdown, + .err_handler = &atl1c_err_handler +}; + +/* + * atl1c_init_module - Driver Registration Routine + * + * atl1c_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + */ +static int __init atl1c_init_module(void) +{ + return pci_register_driver(&atl1c_driver); +} + +/* + * atl1c_exit_module - Driver Exit Cleanup Routine + * + * atl1c_exit_module is called just before the driver is removed + * from memory. + */ +static void __exit atl1c_exit_module(void) +{ + pci_unregister_driver(&atl1c_driver); +} + +module_init(atl1c_init_module); +module_exit(atl1c_exit_module); diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 0089746..bab8a93 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -90,6 +90,7 @@ static const struct pci_device_id cxgb3_pci_tbl[] = { CH_DEVICE(0x30, 2), /* T3B10 */ CH_DEVICE(0x31, 3), /* T3B20 */ CH_DEVICE(0x32, 1), /* T3B02 */ + CH_DEVICE(0x35, 6), /* T3C20-derived T3C10 */ {0,} }; diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 2d14330..ac2a974 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -512,6 +512,13 @@ static const struct adapter_info t3_adap_info[] = { F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, { S_GPIO9, S_GPIO3 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI, &mi1_mdio_ext_ops, "Chelsio T320"}, + {}, + {}, + {1, 0, + F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO6_OEN | F_GPIO7_OEN | + F_GPIO10_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, + { S_GPIO9 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI, + &mi1_mdio_ext_ops, "Chelsio T310" }, }; /* diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 5b910cf..b8251e8 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -6011,9 +6011,20 @@ static void nv_shutdown(struct pci_dev *pdev) if (netif_running(dev)) nv_close(dev); - nv_restore_mac_addr(pdev); + /* + * Restore the MAC so a kernel started by kexec won't get confused. + * If we really go for poweroff, we must not restore the MAC, + * otherwise the MAC for WOL will be reversed at least on some boards. + */ + if (system_state != SYSTEM_POWER_OFF) { + nv_restore_mac_addr(pdev); + } pci_disable_device(pdev); + /* + * Apparently it is not possible to reinitialise from D3 hot, + * only put the device into D3 if we really go for poweroff. + */ if (system_state == SYSTEM_POWER_OFF) { if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled)) pci_enable_wake(pdev, PCI_D3hot, np->wolenabled); diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 5f31bbb..13f11f4 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1175,7 +1175,7 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) { struct mib_counters *p = &mp->mib_counters; - spin_lock(&mp->mib_counters_lock); + spin_lock_bh(&mp->mib_counters_lock); p->good_octets_received += mib_read(mp, 0x00); p->good_octets_received += (u64)mib_read(mp, 0x04) << 32; p->bad_octets_received += mib_read(mp, 0x08); @@ -1208,7 +1208,7 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) p->bad_crc_event += mib_read(mp, 0x74); p->collision += mib_read(mp, 0x78); p->late_collision += mib_read(mp, 0x7c); - spin_unlock(&mp->mib_counters_lock); + spin_unlock_bh(&mp->mib_counters_lock); mod_timer(&mp->mib_counters_timer, jiffies + 30 * HZ); } @@ -1575,7 +1575,7 @@ oom: return; } - mc_spec = kmalloc(0x200, GFP_KERNEL); + mc_spec = kmalloc(0x200, GFP_ATOMIC); if (mc_spec == NULL) goto oom; mc_other = mc_spec + (0x100 >> 2); @@ -2216,8 +2216,6 @@ static int mv643xx_eth_stop(struct net_device *dev) wrlp(mp, INT_MASK, 0x00000000); rdlp(mp, INT_MASK); - del_timer_sync(&mp->mib_counters_timer); - napi_disable(&mp->napi); del_timer_sync(&mp->rx_oom); @@ -2229,6 +2227,7 @@ static int mv643xx_eth_stop(struct net_device *dev) port_reset(mp); mv643xx_eth_get_stats(dev); mib_counters_update(mp); + del_timer_sync(&mp->mib_counters_timer); skb_queue_purge(&mp->rx_recycle); diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index 783c1a7..9a78dae 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -1624,7 +1624,7 @@ static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op) do { msleep(1); e2cmd = smsc911x_reg_read(pdata, E2P_CMD); - } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (timeout--)); + } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout)); if (!timeout) { SMSC_TRACE(DRV, "TIMED OUT"); diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index a1e4b38..4e15ae0 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -341,7 +341,7 @@ static int smsc9420_eeprom_send_cmd(struct smsc9420_pdata *pd, u32 op) do { msleep(1); e2cmd = smsc9420_reg_read(pd, E2P_CMD); - } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (timeout--)); + } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout)); if (!timeout) { smsc_info(HW, "TIMED OUT"); @@ -413,6 +413,7 @@ static int smsc9420_ethtool_get_eeprom(struct net_device *dev, } memcpy(data, &eeprom_data[eeprom->offset], len); + eeprom->magic = SMSC9420_EEPROM_MAGIC; eeprom->len = len; return 0; } @@ -423,6 +424,9 @@ static int smsc9420_ethtool_set_eeprom(struct net_device *dev, struct smsc9420_pdata *pd = netdev_priv(dev); int ret; + if (eeprom->magic != SMSC9420_EEPROM_MAGIC) + return -EINVAL; + smsc9420_eeprom_enable_access(pd); smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWEN_); ret = smsc9420_eeprom_write_location(pd, eeprom->offset, *data); diff --git a/drivers/net/smsc9420.h b/drivers/net/smsc9420.h index 69c351f..e441402 100644 --- a/drivers/net/smsc9420.h +++ b/drivers/net/smsc9420.h @@ -44,6 +44,7 @@ #define LAN_REGISTER_EXTENT (0x400) #define SMSC9420_EEPROM_SIZE ((u32)11) +#define SMSC9420_EEPROM_MAGIC (0x9420) #define PKT_BUF_SZ (VLAN_ETH_FRAME_LEN + NET_IP_ALIGN + 4) diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index feaf0e0..43695b7 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -909,7 +909,7 @@ static void check_duplex(struct net_device *dev) printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d " "negotiated capability %4.4x.\n", dev->name, duplex ? "full" : "half", np->phys[0], negotiated); - iowrite16(ioread16(ioaddr + MACCtrl0) | duplex ? 0x20 : 0, ioaddr + MACCtrl0); + iowrite16(ioread16(ioaddr + MACCtrl0) | (duplex ? 0x20 : 0), ioaddr + MACCtrl0); } } diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 4918763..8d64b1d 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -1157,7 +1157,7 @@ static void gem_pcs_reset(struct gem *gp) if (limit-- <= 0) break; } - if (limit <= 0) + if (limit < 0) printk(KERN_WARNING "%s: PCS reset bit would not clear.\n", gp->dev->name); } diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c index 2813732..16c528d 100644 --- a/drivers/net/sunlance.c +++ b/drivers/net/sunlance.c @@ -343,7 +343,7 @@ static void lance_init_ring_dvma(struct net_device *dev) ib->phys_addr [5] = dev->dev_addr [4]; /* Setup the Tx ring entries */ - for (i = 0; i <= TX_RING_SIZE; i++) { + for (i = 0; i < TX_RING_SIZE; i++) { leptr = LANCE_ADDR(aib + libbuff_offset(tx_buf, i)); ib->btx_ring [i].tmd0 = leptr; ib->btx_ring [i].tmd1_hadr = leptr >> 16; @@ -399,7 +399,7 @@ static void lance_init_ring_pio(struct net_device *dev) sbus_writeb(dev->dev_addr[4], &ib->phys_addr[5]); /* Setup the Tx ring entries */ - for (i = 0; i <= TX_RING_SIZE; i++) { + for (i = 0; i < TX_RING_SIZE; i++) { leptr = libbuff_offset(tx_buf, i); sbus_writew(leptr, &ib->btx_ring [i].tmd0); sbus_writeb(leptr >> 16,&ib->btx_ring [i].tmd1_hadr); diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 4595962..b080f94 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -2237,8 +2237,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) phyid = phydev->drv->phy_id & phydev->drv->phy_id_mask; if (phyid != TG3_PHY_ID_BCMAC131) { phyid &= TG3_PHY_OUI_MASK; - if (phyid == TG3_PHY_OUI_1 && - phyid == TG3_PHY_OUI_2 && + if (phyid == TG3_PHY_OUI_1 || + phyid == TG3_PHY_OUI_2 || phyid == TG3_PHY_OUI_3) do_low_power = true; } diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 852d0e7..108bbbea 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -263,10 +263,11 @@ static void veth_dev_free(struct net_device *dev) } static const struct net_device_ops veth_netdev_ops = { - .ndo_init = veth_dev_init, - .ndo_open = veth_open, - .ndo_start_xmit = veth_xmit, - .ndo_get_stats = veth_get_stats, + .ndo_init = veth_dev_init, + .ndo_open = veth_open, + .ndo_start_xmit = veth_xmit, + .ndo_get_stats = veth_get_stats, + .ndo_set_mac_address = eth_mac_addr, }; static void veth_setup(struct net_device *dev) diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index 067c871..3b9d27ea 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -157,7 +157,7 @@ enum { /* Firmware version we request when pulling the fw image file */ -#define I2400M_FW_VERSION "1.3" +#define I2400M_FW_VERSION "1.4" /** |