diff options
author | Yaniv Rosner <yaniv.rosner@broadcom.com> | 2010-09-01 09:51:25 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-09-01 17:44:33 (GMT) |
commit | ac4d944910d4d4e9cc520f304f2fa2eb54e9677c (patch) | |
tree | ebd3e56561ed273cf156545105426b72d7a607b1 /drivers | |
parent | 54c2fb785965a666a3e79dda16896801dfcf34e9 (diff) | |
download | linux-fsl-qoriq-ac4d944910d4d4e9cc520f304f2fa2eb54e9677c.tar.xz |
bnx2x: Change BCM848xx configuration according to IEEE
Change BCM848xx behavior to fit IEEE such that setting 10Mb/100Mb will
use force speed, and setting 1Gb/10Gb will use auto-negotiation with the
specific speed advertised
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/bnx2x/bnx2x_link.c | 288 | ||||
-rw-r--r-- | drivers/net/bnx2x/bnx2x_reg.h | 3 |
2 files changed, 127 insertions, 164 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index cbacf8a..7a8df7a 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -4354,197 +4354,159 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) } case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823: + { /* This phy uses the NIG latch mechanism since link indication arrives through its LED4 and not via its LASI signal, so we get steady signal instead of clear on read */ + u16 autoneg_val, an_1000_val, an_10_100_val; bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4, - 1 << NIG_LATCH_BC_ENABLE_MI_INT); + 1 << NIG_LATCH_BC_ENABLE_MI_INT); bnx2x_cl45_write(bp, params->port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, 0x0000); + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, 0x0000); bnx2x_8481_set_led4(params, ext_phy_type, ext_phy_addr); - if (params->req_line_speed == SPEED_AUTO_NEG) { - u16 autoneg_val, an_1000_val, an_10_100_val; - /* set 1000 speed advertisement */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_1000T_CTRL, - &an_1000_val); - - if (params->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) { - an_1000_val |= (1<<8); - if (params->req_duplex == DUPLEX_FULL) - an_1000_val |= (1<<9); - DP(NETIF_MSG_LINK, "Advertising 1G\n"); - } else - an_1000_val &= ~((1<<8) | (1<<9)); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_1000T_CTRL, - an_1000_val); - - /* set 100 speed advertisement */ - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_AN_ADV, - &an_10_100_val); - - if (params->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) { - an_10_100_val |= (1<<7); - if (params->req_duplex == DUPLEX_FULL) - an_10_100_val |= (1<<8); - DP(NETIF_MSG_LINK, - "Advertising 100M\n"); - } else - an_10_100_val &= ~((1<<7) | (1<<8)); - - /* set 10 speed advertisement */ - if (params->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) { - an_10_100_val |= (1<<5); - if (params->req_duplex == DUPLEX_FULL) - an_10_100_val |= (1<<6); - DP(NETIF_MSG_LINK, "Advertising 10M\n"); - } - else - an_10_100_val &= ~((1<<5) | (1<<6)); - - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_AN_ADV, - an_10_100_val); - - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_MII_CTRL, - &autoneg_val); - - /* Disable forced speed */ - autoneg_val &= ~(1<<6|1<<13); + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1000T_CTRL, + &an_1000_val); + bnx2x_ext_phy_set_pause(params, vars); + bnx2x_cl45_read(bp, params->port, ext_phy_type, + ext_phy_addr, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_AN_ADV, + &an_10_100_val); + bnx2x_cl45_read(bp, params->port, ext_phy_type, + ext_phy_addr, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, + &autoneg_val); + /* Disable forced speed */ + autoneg_val &= ~((1<<6) | (1<<8) | (1<<9) | (1<<12) | + (1<<13)); + an_10_100_val &= ~((1<<5) | (1<<6) | (1<<7) | (1<<8)); + + if (((params->req_line_speed == SPEED_AUTO_NEG) && + (params->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (params->req_line_speed == SPEED_1000)) { + an_1000_val |= (1<<8); + autoneg_val |= (1<<9 | 1<<12); + if (params->req_duplex == DUPLEX_FULL) + an_1000_val |= (1<<9); + DP(NETIF_MSG_LINK, "Advertising 1G\n"); + } else + an_1000_val &= ~((1<<8) | (1<<9)); - /* Enable autoneg and restart autoneg - for legacy speeds */ - autoneg_val |= (1<<9|1<<12); + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1000T_CTRL, + an_1000_val); + + /* set 10 speed advertisement */ + if (((params->req_line_speed == SPEED_AUTO_NEG) && + (params->speed_cap_mask & + (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)))) { + an_10_100_val |= (1<<7); + /* + * Enable autoneg and restart autoneg for + * legacy speeds + */ + autoneg_val |= (1<<9 | 1<<12); if (params->req_duplex == DUPLEX_FULL) - autoneg_val |= (1<<8); - else - autoneg_val &= ~(1<<8); + an_10_100_val |= (1<<8); + DP(NETIF_MSG_LINK, "Advertising 100M\n"); + } + /* set 10 speed advertisement */ + if (((params->req_line_speed == SPEED_AUTO_NEG) && + (params->speed_cap_mask & + (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)))) { + an_10_100_val |= (1<<5); + autoneg_val |= (1<<9 | 1<<12); + if (params->req_duplex == DUPLEX_FULL) + an_10_100_val |= (1<<6); + DP(NETIF_MSG_LINK, "Advertising 10M\n"); + } + /* Only 10/100 are allowed to work in FORCE mode */ + if (params->req_line_speed == SPEED_100) { + autoneg_val |= (1<<13); + /* Enabled AUTO-MDIX when autoneg is disabled */ bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_MII_CTRL, - autoneg_val); - - if (params->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) { - DP(NETIF_MSG_LINK, "Advertising 10G\n"); - /* Restart autoneg for 10G*/ + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_AUX_CTRL, + (1<<15 | 1<<9 | 7<<0)); + DP(NETIF_MSG_LINK, "Setting 100M force\n"); + } + if (params->req_line_speed == SPEED_10) { + /* Enabled AUTO-MDIX when autoneg is disabled */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_AUX_CTRL, + (1<<15 | 1<<9 | 7<<0)); + DP(NETIF_MSG_LINK, "Setting 10M force\n"); + } bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_CTRL, 0x3200); - } - } else { - /* Force speed */ - u16 autoneg_ctrl, pma_ctrl; - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_MII_CTRL, - &autoneg_ctrl); + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_AN_ADV, + an_10_100_val); - /* Disable autoneg */ - autoneg_ctrl &= ~(1<<12); + if (params->req_duplex == DUPLEX_FULL) + autoneg_val |= (1<<8); - /* Set 1000 force */ - switch (params->req_line_speed) { - case SPEED_10000: - DP(NETIF_MSG_LINK, - "Unable to set 10G force !\n"); - break; - case SPEED_1000: - bnx2x_cl45_read(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, - &pma_ctrl); - autoneg_ctrl &= ~(1<<13); - autoneg_ctrl |= (1<<6); - pma_ctrl &= ~(1<<13); - pma_ctrl |= (1<<6); - DP(NETIF_MSG_LINK, - "Setting 1000M force\n"); - bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, - pma_ctrl); - break; - case SPEED_100: - autoneg_ctrl |= (1<<13); - autoneg_ctrl &= ~(1<<6); - DP(NETIF_MSG_LINK, - "Setting 100M force\n"); - break; - case SPEED_10: - autoneg_ctrl &= ~(1<<13); - autoneg_ctrl &= ~(1<<6); - DP(NETIF_MSG_LINK, - "Setting 10M force\n"); - break; - } + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, + autoneg_val); - /* Duplex mode */ - if (params->req_duplex == DUPLEX_FULL) { - autoneg_ctrl |= (1<<8); - DP(NETIF_MSG_LINK, - "Setting full duplex\n"); - } else - autoneg_ctrl &= ~(1<<8); + if (((params->req_line_speed == SPEED_AUTO_NEG) && + (params->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || + (params->req_line_speed == SPEED_10000)) { + DP(NETIF_MSG_LINK, "Advertising 10G\n"); + /* Restart autoneg for 10G*/ - /* Update autoneg ctrl and pma ctrl */ bnx2x_cl45_write(bp, params->port, - ext_phy_type, - ext_phy_addr, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_MII_CTRL, - autoneg_ctrl); - } + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_CTRL, + 0x3200); + + } else if (params->req_line_speed != SPEED_10 && + params->req_line_speed != SPEED_100) + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_10GBASE_T_AN_CTRL, + 1); /* Save spirom version */ bnx2x_save_8481_spirom_version(bp, params->port, ext_phy_addr, params->shmem_base); break; + } case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: DP(NETIF_MSG_LINK, "XGXS PHY Failure detected 0x%x\n", diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h index c82e261..3989617 100644 --- a/drivers/net/bnx2x/bnx2x_reg.h +++ b/drivers/net/bnx2x/bnx2x_reg.h @@ -5212,12 +5212,13 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_AN_REG_8073_2_5G 0x8329 #define MDIO_AN_REG_8727_MISC_CTRL 0x8309 - +#define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL 0x0020 #define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0 #define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4 #define MDIO_AN_REG_8481_1000T_CTRL 0xffe9 #define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5 #define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7 +#define MDIO_AN_REG_8481_AUX_CTRL 0xfff8 #define MDIO_AN_REG_8481_LEGACY_SHADOW 0xfffc #define IGU_FUNC_BASE 0x0400 |