Merge branch 'linus' into x86/asm

Sync up the latest NMI fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 files changed, 212 insertions, 12 deletions

diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index c8ef9bc..19a41d1 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -71,6 +71,8 @@ struct mmc_ext_csd {
 	bool			hpi_en;			/* HPI enablebit */
 	bool			hpi;			/* HPI support bit */
 	unsigned int		hpi_cmd;		/* cmd used as HPI */
+	unsigned int		boot_ro_lock;		/* ro lock support */
+	bool			boot_ro_lockable;
 	u8			raw_partition_support;	/* 160 */
 	u8			raw_erased_mem_count;	/* 181 */
 	u8			raw_ext_csd_structure;	/* 194 */
@@ -110,6 +112,7 @@ struct sd_ssr {
 struct sd_switch_caps {
 	unsigned int		hs_max_dtr;
 	unsigned int		uhs_max_dtr;
+#define HIGH_SPEED_MAX_DTR	50000000
 #define UHS_SDR104_MAX_DTR	208000000
 #define UHS_SDR50_MAX_DTR	100000000
 #define UHS_DDR50_MAX_DTR	50000000
@@ -117,11 +120,13 @@ struct sd_switch_caps {
 #define UHS_SDR12_MAX_DTR	25000000
 	unsigned int		sd3_bus_mode;
 #define UHS_SDR12_BUS_SPEED	0
+#define HIGH_SPEED_BUS_SPEED	1
 #define UHS_SDR25_BUS_SPEED	1
 #define UHS_SDR50_BUS_SPEED	2
 #define UHS_SDR104_BUS_SPEED	3
 #define UHS_DDR50_BUS_SPEED	4
 
+#define SD_MODE_HIGH_SPEED	(1 << HIGH_SPEED_BUS_SPEED)
 #define SD_MODE_UHS_SDR12	(1 << UHS_SDR12_BUS_SPEED)
 #define SD_MODE_UHS_SDR25	(1 << UHS_SDR25_BUS_SPEED)
 #define SD_MODE_UHS_SDR50	(1 << UHS_SDR50_BUS_SPEED)
@@ -184,6 +189,10 @@ struct mmc_part {
 	unsigned int	part_cfg;	/* partition type */
 	char	name[MAX_MMC_PART_NAME_LEN];
 	bool	force_ro;	/* to make boot parts RO by default */
+	unsigned int	area_type;
+#define MMC_BLK_DATA_AREA_MAIN	(1<<0)
+#define MMC_BLK_DATA_AREA_BOOT	(1<<1)
+#define MMC_BLK_DATA_AREA_GP	(1<<2)
 };
 
 /*
@@ -206,6 +215,9 @@ struct mmc_card {
 #define MMC_STATE_HIGHSPEED_DDR (1<<4)		/* card is in high speed mode */
 #define MMC_STATE_ULTRAHIGHSPEED (1<<5)		/* card is in ultra high speed mode */
 #define MMC_CARD_SDXC		(1<<6)		/* card is SDXC */
+#define MMC_CARD_REMOVED	(1<<7)		/* card has been removed */
+#define MMC_STATE_HIGHSPEED_200	(1<<8)		/* card is in HS200 mode */
+#define MMC_STATE_SLEEP		(1<<9)		/* card is in sleep state */
 	unsigned int		quirks; 	/* card quirks */
 #define MMC_QUIRK_LENIENT_FN0	(1<<0)		/* allow SDIO FN0 writes outside of the VS CCCR range */
 #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1)	/* use func->cur_blksize */
@@ -261,12 +273,14 @@ struct mmc_card {
  * This function fill contents in mmc_part.
  */
 static inline void mmc_part_add(struct mmc_card *card, unsigned int size,
-			unsigned int part_cfg, char *name, int idx, bool ro)
+			unsigned int part_cfg, char *name, int idx, bool ro,
+			int area_type)
 {
 	card->part[card->nr_parts].size = size;
 	card->part[card->nr_parts].part_cfg = part_cfg;
 	sprintf(card->part[card->nr_parts].name, name, idx);
 	card->part[card->nr_parts].force_ro = ro;
+	card->part[card->nr_parts].area_type = area_type;
 	card->nr_parts++;
 }
 
@@ -362,19 +376,28 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
 #define mmc_card_present(c)	((c)->state & MMC_STATE_PRESENT)
 #define mmc_card_readonly(c)	((c)->state & MMC_STATE_READONLY)
 #define mmc_card_highspeed(c)	((c)->state & MMC_STATE_HIGHSPEED)
+#define mmc_card_hs200(c)	((c)->state & MMC_STATE_HIGHSPEED_200)
 #define mmc_card_blockaddr(c)	((c)->state & MMC_STATE_BLOCKADDR)
 #define mmc_card_ddr_mode(c)	((c)->state & MMC_STATE_HIGHSPEED_DDR)
-#define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED)
+#define mmc_card_uhs(c)		((c)->state & MMC_STATE_ULTRAHIGHSPEED)
+#define mmc_sd_card_uhs(c)	((c)->state & MMC_STATE_ULTRAHIGHSPEED)
 #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
+#define mmc_card_removed(c)	((c) && ((c)->state & MMC_CARD_REMOVED))
+#define mmc_card_is_sleep(c)	((c)->state & MMC_STATE_SLEEP)
 
 #define mmc_card_set_present(c)	((c)->state |= MMC_STATE_PRESENT)
 #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
 #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
+#define mmc_card_set_hs200(c)	((c)->state |= MMC_STATE_HIGHSPEED_200)
 #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
 #define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR)
+#define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
 #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
 #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
+#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
+#define mmc_card_set_sleep(c)	((c)->state |= MMC_STATE_SLEEP)
 
+#define mmc_card_clr_sleep(c)	((c)->state &= ~MMC_STATE_SLEEP)
 /*
  * Quirk add/remove for MMC products.
  */
diff --git a/include/linux/mmc/cd-gpio.h b/include/linux/mmc/cd-gpio.h
new file mode 100644
index 0000000..a8e4697
--- /dev/null
+++ b/include/linux/mmc/cd-gpio.h
@@ -0,0 +1,19 @@
+/*
+ * Generic GPIO card-detect helper header
+ *
+ * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MMC_CD_GPIO_H
+#define MMC_CD_GPIO_H
+
+struct mmc_host;
+int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio,
+			unsigned int irq, unsigned long flags);
+void mmc_cd_gpio_free(struct mmc_host *host);
+
+#endif
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 174a844..87a976c 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -180,6 +180,8 @@ extern int mmc_try_claim_host(struct mmc_host *host);
 
 extern int mmc_flush_cache(struct mmc_card *);
 
+extern int mmc_detect_card_removed(struct mmc_host *host);
+
 /**
  *	mmc_claim_host - exclusively claim a host
  *	@host: mmc host to claim
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 6dc9b80..aae5d1f 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -14,6 +14,8 @@
 #ifndef LINUX_MMC_DW_MMC_H
 #define LINUX_MMC_DW_MMC_H
 
+#include <linux/scatterlist.h>
+
 #define MAX_MCI_SLOTS	2
 
 enum dw_mci_state {
@@ -40,7 +42,7 @@ struct mmc_data;
  * @lock: Spinlock protecting the queue and associated data.
  * @regs: Pointer to MMIO registers.
  * @sg: Scatterlist entry currently being processed by PIO code, if any.
- * @pio_offset: Offset into the current scatterlist entry.
+ * @sg_miter: PIO mapping scatterlist iterator.
  * @cur_slot: The slot which is currently using the controller.
  * @mrq: The request currently being processed on @cur_slot,
  *	or NULL if the controller is idle.
@@ -115,7 +117,7 @@ struct dw_mci {
 	void __iomem		*regs;
 
 	struct scatterlist	*sg;
-	unsigned int		pio_offset;
+	struct sg_mapping_iter	sg_miter;
 
 	struct dw_mci_slot	*cur_slot;
 	struct mmc_request	*mrq;
@@ -214,6 +216,7 @@ struct dw_mci_board {
 	unsigned int bus_hz; /* Bus speed */
 
 	unsigned int caps;	/* Capabilities */
+	unsigned int caps2;	/* More capabilities */
 	/*
 	 * Override fifo depth. If 0, autodetect it from the FIFOTH register,
 	 * but note that this may not be reliable after a bootloader has used
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index a3ac9c4..ee2b036 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -56,10 +56,13 @@ struct mmc_ios {
 #define MMC_TIMING_UHS_SDR50	3
 #define MMC_TIMING_UHS_SDR104	4
 #define MMC_TIMING_UHS_DDR50	5
+#define MMC_TIMING_MMC_HS200	6
 
 #define MMC_SDR_MODE		0
 #define MMC_1_2V_DDR_MODE	1
 #define MMC_1_8V_DDR_MODE	2
+#define MMC_1_2V_SDR_MODE	3
+#define MMC_1_8V_SDR_MODE	4
 
 	unsigned char	signal_voltage;		/* signalling voltage (1.8V or 3.3V) */
 
@@ -148,7 +151,9 @@ struct mmc_host_ops {
 	void	(*init_card)(struct mmc_host *host, struct mmc_card *card);
 
 	int	(*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios);
-	int	(*execute_tuning)(struct mmc_host *host);
+
+	/* The tuning command opcode value is different for SD and eMMC cards */
+	int	(*execute_tuning)(struct mmc_host *host, u32 opcode);
 	void	(*enable_preset_value)(struct mmc_host *host, bool enable);
 	int	(*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
 	void	(*hw_reset)(struct mmc_host *host);
@@ -167,6 +172,11 @@ struct mmc_async_req {
 	int (*err_check) (struct mmc_card *, struct mmc_async_req *);
 };
 
+struct mmc_hotplug {
+	unsigned int irq;
+	void *handler_priv;
+};
+
 struct mmc_host {
 	struct device		*parent;
 	struct device		class_dev;
@@ -242,6 +252,12 @@ struct mmc_host {
 #define MMC_CAP2_CACHE_CTRL	(1 << 1)	/* Allow cache control */
 #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2)	/* Notify poweroff supported */
 #define MMC_CAP2_NO_MULTI_READ	(1 << 3)	/* Multiblock reads don't work */
+#define MMC_CAP2_NO_SLEEP_CMD	(1 << 4)	/* Don't allow sleep command */
+#define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */
+#define MMC_CAP2_HS200_1_2V_SDR	(1 << 6)        /* can support */
+#define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
+				 MMC_CAP2_HS200_1_2V_SDR)
+#define MMC_CAP2_BROKEN_VOLTAGE	(1 << 7)	/* Use the broken voltage */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 	unsigned int        power_notify_type;
@@ -253,10 +269,12 @@ struct mmc_host {
 	int			clk_requests;	/* internal reference counter */
 	unsigned int		clk_delay;	/* number of MCI clk hold cycles */
 	bool			clk_gated;	/* clock gated */
-	struct work_struct	clk_gate_work; /* delayed clock gate */
+	struct delayed_work	clk_gate_work; /* delayed clock gate */
 	unsigned int		clk_old;	/* old clock value cache */
 	spinlock_t		clk_lock;	/* lock for clk fields */
 	struct mutex		clk_gate_mutex;	/* mutex for clock gating */
+	struct device_attribute clkgate_delay_attr;
+	unsigned long           clkgate_delay;
 #endif
 
 	/* host specific block data */
@@ -297,6 +315,8 @@ struct mmc_host {
 	int			claim_cnt;	/* "claim" nesting count */
 
 	struct delayed_work	detect;
+	int			detect_change;	/* card detect flag */
+	struct mmc_hotplug	hotplug;
 
 	const struct mmc_bus_ops *bus_ops;	/* current bus driver */
 	unsigned int		bus_refs;	/* reference counter */
@@ -323,6 +343,8 @@ struct mmc_host {
 	struct fault_attr	fail_mmc_request;
 #endif
 
+	unsigned int		actual_clock;	/* Actual HC clock rate */
+
 	unsigned long		private[0] ____cacheline_aligned;
 };
 
@@ -396,7 +418,7 @@ static inline void mmc_set_disable_delay(struct mmc_host *host,
 }
 
 /* Module parameter */
-extern int mmc_assume_removable;
+extern bool mmc_assume_removable;
 
 static inline int mmc_card_is_removable(struct mmc_host *host)
 {
@@ -423,4 +445,23 @@ static inline int mmc_boot_partition_access(struct mmc_host *host)
 	return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
 }
 
+#ifdef CONFIG_MMC_CLKGATE
+void mmc_host_clk_hold(struct mmc_host *host);
+void mmc_host_clk_release(struct mmc_host *host);
+unsigned int mmc_host_clk_rate(struct mmc_host *host);
+
+#else
+static inline void mmc_host_clk_hold(struct mmc_host *host)
+{
+}
+
+static inline void mmc_host_clk_release(struct mmc_host *host)
+{
+}
+
+static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
+{
+	return host->ios.clock;
+}
+#endif
 #endif /* LINUX_MMC_HOST_H */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 0e71356..fb9f6e1 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -51,6 +51,7 @@
 #define MMC_READ_SINGLE_BLOCK    17   /* adtc [31:0] data addr   R1  */
 #define MMC_READ_MULTIPLE_BLOCK  18   /* adtc [31:0] data addr   R1  */
 #define MMC_SEND_TUNING_BLOCK    19   /* adtc                    R1  */
+#define MMC_SEND_TUNING_BLOCK_HS200	21	/* adtc R1  */
 
   /* class 3 */
 #define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */
@@ -280,6 +281,7 @@ struct _mmc_csd {
 #define EXT_CSD_RST_N_FUNCTION		162	/* R/W */
 #define EXT_CSD_SANITIZE_START		165     /* W */
 #define EXT_CSD_WR_REL_PARAM		166	/* RO */
+#define EXT_CSD_BOOT_WP			173	/* R/W */
 #define EXT_CSD_ERASE_GROUP_DEF		175	/* R/W */
 #define EXT_CSD_PART_CONFIG		179	/* R/W */
 #define EXT_CSD_ERASED_MEM_CONT		181	/* RO */
@@ -321,6 +323,11 @@ struct _mmc_csd {
 
 #define EXT_CSD_WR_REL_PARAM_EN		(1<<2)
 
+#define EXT_CSD_BOOT_WP_B_PWR_WP_DIS	(0x40)
+#define EXT_CSD_BOOT_WP_B_PERM_WP_DIS	(0x10)
+#define EXT_CSD_BOOT_WP_B_PERM_WP_EN	(0x04)
+#define EXT_CSD_BOOT_WP_B_PWR_WP_EN	(0x01)
+
 #define EXT_CSD_PART_CONFIG_ACC_MASK	(0x7)
 #define EXT_CSD_PART_CONFIG_ACC_BOOT0	(0x1)
 #define EXT_CSD_PART_CONFIG_ACC_GP0	(0x4)
@@ -333,13 +340,76 @@ struct _mmc_csd {
 
 #define EXT_CSD_CARD_TYPE_26	(1<<0)	/* Card can run at 26MHz */
 #define EXT_CSD_CARD_TYPE_52	(1<<1)	/* Card can run at 52MHz */
-#define EXT_CSD_CARD_TYPE_MASK	0xF	/* Mask out reserved bits */
+#define EXT_CSD_CARD_TYPE_MASK	0x3F	/* Mask out reserved bits */
 #define EXT_CSD_CARD_TYPE_DDR_1_8V  (1<<2)   /* Card can run at 52MHz */
 					     /* DDR mode @1.8V or 3V I/O */
 #define EXT_CSD_CARD_TYPE_DDR_1_2V  (1<<3)   /* Card can run at 52MHz */
 					     /* DDR mode @1.2V I/O */
 #define EXT_CSD_CARD_TYPE_DDR_52       (EXT_CSD_CARD_TYPE_DDR_1_8V  \
 					| EXT_CSD_CARD_TYPE_DDR_1_2V)
+#define EXT_CSD_CARD_TYPE_SDR_1_8V	(1<<4)	/* Card can run at 200MHz */
+#define EXT_CSD_CARD_TYPE_SDR_1_2V	(1<<5)	/* Card can run at 200MHz */
+						/* SDR mode @1.2V I/O */
+
+#define EXT_CSD_CARD_TYPE_SDR_200	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
+					 EXT_CSD_CARD_TYPE_SDR_1_2V)
+
+#define EXT_CSD_CARD_TYPE_SDR_ALL	(EXT_CSD_CARD_TYPE_SDR_200 | \
+					 EXT_CSD_CARD_TYPE_52 | \
+					 EXT_CSD_CARD_TYPE_26)
+
+#define	EXT_CSD_CARD_TYPE_SDR_1_2V_ALL	(EXT_CSD_CARD_TYPE_SDR_1_2V | \
+					 EXT_CSD_CARD_TYPE_52 | \
+					 EXT_CSD_CARD_TYPE_26)
+
+#define	EXT_CSD_CARD_TYPE_SDR_1_8V_ALL	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
+					 EXT_CSD_CARD_TYPE_52 | \
+					 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V	(EXT_CSD_CARD_TYPE_SDR_1_2V | \
+						 EXT_CSD_CARD_TYPE_DDR_1_8V | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
+						 EXT_CSD_CARD_TYPE_DDR_1_8V | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V	(EXT_CSD_CARD_TYPE_SDR_1_2V | \
+						 EXT_CSD_CARD_TYPE_DDR_1_2V | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
+						 EXT_CSD_CARD_TYPE_DDR_1_2V | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52	(EXT_CSD_CARD_TYPE_SDR_1_2V | \
+						 EXT_CSD_CARD_TYPE_DDR_52 | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
+						 EXT_CSD_CARD_TYPE_DDR_52 | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V	(EXT_CSD_CARD_TYPE_SDR_200 | \
+						 EXT_CSD_CARD_TYPE_DDR_1_8V | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V	(EXT_CSD_CARD_TYPE_SDR_200 | \
+						 EXT_CSD_CARD_TYPE_DDR_1_2V | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52	(EXT_CSD_CARD_TYPE_SDR_200 | \
+						 EXT_CSD_CARD_TYPE_DDR_52 | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
 
 #define EXT_CSD_BUS_WIDTH_1	0	/* Card is in 1 bit mode */
 #define EXT_CSD_BUS_WIDTH_4	1	/* Card is in 4 bit mode */
diff --git a/include/linux/mmc/sdhci-pci-data.h b/include/linux/mmc/sdhci-pci-data.h
new file mode 100644
index 0000000..8959604
--- /dev/null
+++ b/include/linux/mmc/sdhci-pci-data.h
@@ -0,0 +1,18 @@
+#ifndef LINUX_MMC_SDHCI_PCI_DATA_H
+#define LINUX_MMC_SDHCI_PCI_DATA_H
+
+struct pci_dev;
+
+struct sdhci_pci_data {
+	struct pci_dev	*pdev;
+	int		slotno;
+	int		rst_n_gpio; /* Set to -EINVAL if unused */
+	int		cd_gpio;    /* Set to -EINVAL if unused */
+	int		(*setup)(struct sdhci_pci_data *data);
+	void		(*cleanup)(struct sdhci_pci_data *data);
+};
+
+extern struct sdhci_pci_data *(*sdhci_pci_get_data)(struct pci_dev *pdev,
+				int slotno);
+
+#endif
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index e4b6935..c750f85 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -90,8 +90,6 @@ struct sdhci_host {
 
 	unsigned int quirks2;	/* More deviations from spec. */
 
-#define SDHCI_QUIRK2_OWN_CARD_DETECTION			(1<<0)
-
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
 
@@ -121,6 +119,7 @@ struct sdhci_host {
 #define SDHCI_AUTO_CMD23	(1<<7)	/* Auto CMD23 support */
 #define SDHCI_PV_ENABLED	(1<<8)	/* Preset value enabled */
 #define SDHCI_SDIO_IRQ_ENABLED	(1<<9)	/* SDIO irq enabled */
+#define SDHCI_HS200_NEEDS_TUNING (1<<10)	/* HS200 needs tuning */
 
 	unsigned int version;	/* SDHCI spec. version */
 
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
index e0b1123..c9fe66c 100644
--- a/include/linux/mmc/sdio.h
+++ b/include/linux/mmc/sdio.h
@@ -38,6 +38,7 @@
  *      [8:0] Byte/block count
  */
 
+#define R4_18V_PRESENT (1<<24)
 #define R4_MEMORY_PRESENT (1 << 27)
 
 /*
@@ -85,6 +86,7 @@
 #define  SDIO_SD_REV_1_01	0	/* SD Physical Spec Version 1.01 */
 #define  SDIO_SD_REV_1_10	1	/* SD Physical Spec Version 1.10 */
 #define  SDIO_SD_REV_2_00	2	/* SD Physical Spec Version 2.00 */
+#define  SDIO_SD_REV_3_00	3	/* SD Physical Spev Version 3.00 */
 
 #define SDIO_CCCR_IOEx		0x02
 #define SDIO_CCCR_IORx		0x03
@@ -134,8 +136,31 @@
 #define SDIO_CCCR_SPEED		0x13
 
 #define  SDIO_SPEED_SHS		0x01	/* Supports High-Speed mode */
-#define  SDIO_SPEED_EHS		0x02	/* Enable High-Speed mode */
-
+#define  SDIO_SPEED_BSS_SHIFT	1
+#define  SDIO_SPEED_BSS_MASK	(7<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_SDR12	(0<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_SDR25	(1<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_SDR50	(2<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_SDR104	(3<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_DDR50	(4<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_EHS		SDIO_SPEED_SDR25	/* Enable High-Speed */
+
+#define SDIO_CCCR_UHS		0x14
+#define  SDIO_UHS_SDR50		0x01
+#define  SDIO_UHS_SDR104	0x02
+#define  SDIO_UHS_DDR50		0x04
+
+#define SDIO_CCCR_DRIVE_STRENGTH 0x15
+#define  SDIO_SDTx_MASK		0x07
+#define  SDIO_DRIVE_SDTA	(1<<0)
+#define  SDIO_DRIVE_SDTC	(1<<1)
+#define  SDIO_DRIVE_SDTD	(1<<2)
+#define  SDIO_DRIVE_DTSx_MASK	0x03
+#define  SDIO_DRIVE_DTSx_SHIFT	4
+#define  SDIO_DTSx_SET_TYPE_B	(0 << SDIO_DRIVE_DTSx_SHIFT)
+#define  SDIO_DTSx_SET_TYPE_A	(1 << SDIO_DRIVE_DTSx_SHIFT)
+#define  SDIO_DTSx_SET_TYPE_C	(2 << SDIO_DRIVE_DTSx_SHIFT)
+#define  SDIO_DTSx_SET_TYPE_D	(3 << SDIO_DRIVE_DTSx_SHIFT)
 /*
  * Function Basic Registers (FBR)
  */