diff options
431 files changed, 5896 insertions, 2961 deletions
diff --git a/Documentation/Changes b/Documentation/Changes index cb2b141..b95082b 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -33,10 +33,12 @@ o Gnu make 3.79.1 # make --version o binutils 2.12 # ld -v o util-linux 2.10o # fdformat --version o module-init-tools 0.9.10 # depmod -V -o e2fsprogs 1.29 # tune2fs +o e2fsprogs 1.41.4 # e2fsck -V o jfsutils 1.1.3 # fsck.jfs -V o reiserfsprogs 3.6.3 # reiserfsck -V 2>&1|grep reiserfsprogs o xfsprogs 2.6.0 # xfs_db -V +o squashfs-tools 4.0 # mksquashfs -version +o btrfs-progs 0.18 # btrfsck o pcmciautils 004 # pccardctl -V o quota-tools 3.09 # quota -V o PPP 2.4.0 # pppd --version diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index 1875e50..72968cd 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -483,17 +483,25 @@ values. To do the latter, you can stick the following in your .emacs file: (* (max steps 1) c-basic-offset))) +(add-hook 'c-mode-common-hook + (lambda () + ;; Add kernel style + (c-add-style + "linux-tabs-only" + '("linux" (c-offsets-alist + (arglist-cont-nonempty + c-lineup-gcc-asm-reg + c-lineup-arglist-tabs-only)))))) + (add-hook 'c-mode-hook (lambda () (let ((filename (buffer-file-name))) ;; Enable kernel mode for the appropriate files (when (and filename - (string-match "~/src/linux-trees" filename)) + (string-match (expand-file-name "~/src/linux-trees") + filename)) (setq indent-tabs-mode t) - (c-set-style "linux") - (c-set-offset 'arglist-cont-nonempty - '(c-lineup-gcc-asm-reg - c-lineup-arglist-tabs-only)))))) + (c-set-style "linux-tabs-only"))))) This will make emacs go better with the kernel coding style for C files below ~/src/linux-trees. diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index 5244169..2a3fcc5 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -5,7 +5,7 @@ This document describes the DMA API. For a more gentle introduction phrased in terms of the pci_ equivalents (and actual examples) see -DMA-mapping.txt +Documentation/PCI/PCI-DMA-mapping.txt. This API is split into two pieces. Part I describes the API and the corresponding pci_ API. Part II describes the extensions to the API diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index b787e47..52e1b79 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -42,6 +42,12 @@ GPL version 2. <revhistory> <revision> + <revnumber>0.7</revnumber> + <date>2008-12-23</date> + <authorinitials>hjk</authorinitials> + <revremark>Added generic platform drivers and offset attribute.</revremark> + </revision> + <revision> <revnumber>0.6</revnumber> <date>2008-12-05</date> <authorinitials>hjk</authorinitials> @@ -312,6 +318,16 @@ interested in translating it, please email me pointed to by addr. </para> </listitem> +<listitem> + <para> + <filename>offset</filename>: The offset, in bytes, that has to be + added to the pointer returned by <function>mmap()</function> to get + to the actual device memory. This is important if the device's memory + is not page aligned. Remember that pointers returned by + <function>mmap()</function> are always page aligned, so it is good + style to always add this offset. + </para> +</listitem> </itemizedlist> <para> @@ -594,6 +610,78 @@ framework to set up sysfs files for this region. Simply leave it alone. </para> </sect1> +<sect1 id="using_uio_pdrv"> +<title>Using uio_pdrv for platform devices</title> + <para> + In many cases, UIO drivers for platform devices can be handled in a + generic way. In the same place where you define your + <varname>struct platform_device</varname>, you simply also implement + your interrupt handler and fill your + <varname>struct uio_info</varname>. A pointer to this + <varname>struct uio_info</varname> is then used as + <varname>platform_data</varname> for your platform device. + </para> + <para> + You also need to set up an array of <varname>struct resource</varname> + containing addresses and sizes of your memory mappings. This + information is passed to the driver using the + <varname>.resource</varname> and <varname>.num_resources</varname> + elements of <varname>struct platform_device</varname>. + </para> + <para> + You now have to set the <varname>.name</varname> element of + <varname>struct platform_device</varname> to + <varname>"uio_pdrv"</varname> to use the generic UIO platform device + driver. This driver will fill the <varname>mem[]</varname> array + according to the resources given, and register the device. + </para> + <para> + The advantage of this approach is that you only have to edit a file + you need to edit anyway. You do not have to create an extra driver. + </para> +</sect1> + +<sect1 id="using_uio_pdrv_genirq"> +<title>Using uio_pdrv_genirq for platform devices</title> + <para> + Especially in embedded devices, you frequently find chips where the + irq pin is tied to its own dedicated interrupt line. In such cases, + where you can be really sure the interrupt is not shared, we can take + the concept of <varname>uio_pdrv</varname> one step further and use a + generic interrupt handler. That's what + <varname>uio_pdrv_genirq</varname> does. + </para> + <para> + The setup for this driver is the same as described above for + <varname>uio_pdrv</varname>, except that you do not implement an + interrupt handler. The <varname>.handler</varname> element of + <varname>struct uio_info</varname> must remain + <varname>NULL</varname>. The <varname>.irq_flags</varname> element + must not contain <varname>IRQF_SHARED</varname>. + </para> + <para> + You will set the <varname>.name</varname> element of + <varname>struct platform_device</varname> to + <varname>"uio_pdrv_genirq"</varname> to use this driver. + </para> + <para> + The generic interrupt handler of <varname>uio_pdrv_genirq</varname> + will simply disable the interrupt line using + <function>disable_irq_nosync()</function>. After doing its work, + userspace can reenable the interrupt by writing 0x00000001 to the UIO + device file. The driver already implements an + <function>irq_control()</function> to make this possible, you must not + implement your own. + </para> + <para> + Using <varname>uio_pdrv_genirq</varname> not only saves a few lines of + interrupt handler code. You also do not need to know anything about + the chip's internal registers to create the kernel part of the driver. + All you need to know is the irq number of the pin the chip is + connected to. + </para> +</sect1> + </chapter> <chapter id="userspace_driver" xreflabel="Writing a driver in user space"> diff --git a/Documentation/IO-mapping.txt b/Documentation/IO-mapping.txt index 86edb61..78a4406 100644 --- a/Documentation/IO-mapping.txt +++ b/Documentation/IO-mapping.txt @@ -1,6 +1,6 @@ [ NOTE: The virt_to_bus() and bus_to_virt() functions have been - superseded by the functionality provided by the PCI DMA - interface (see Documentation/DMA-mapping.txt). They continue + superseded by the functionality provided by the PCI DMA interface + (see Documentation/PCI/PCI-DMA-mapping.txt). They continue to be documented below for historical purposes, but new code must not use them. --davidm 00/12/12 ] diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 3c5434c..ecad6ee 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -186,8 +186,9 @@ a virtual address mapping (unlike the earlier scheme of virtual address do not have a corresponding kernel virtual address space mapping) and low-memory pages. -Note: Please refer to DMA-mapping.txt for a discussion on PCI high mem DMA -aspects and mapping of scatter gather lists, and support for 64 bit PCI. +Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion +on PCI high mem DMA aspects and mapping of scatter gather lists, and support +for 64 bit PCI. Special handling is required only for cases where i/o needs to happen on pages at physical memory addresses beyond what the device can support. In these @@ -953,14 +954,14 @@ elevator_allow_merge_fn called whenever the block layer determines results in some sort of conflict internally, this hook allows it to do that. -elevator_dispatch_fn fills the dispatch queue with ready requests. +elevator_dispatch_fn* fills the dispatch queue with ready requests. I/O schedulers are free to postpone requests by not filling the dispatch queue unless @force is non-zero. Once dispatched, I/O schedulers are not allowed to manipulate the requests - they belong to generic dispatch queue. -elevator_add_req_fn called to add a new request into the scheduler +elevator_add_req_fn* called to add a new request into the scheduler elevator_queue_empty_fn returns true if the merge queue is empty. Drivers shouldn't use this, but rather check @@ -990,7 +991,7 @@ elevator_activate_req_fn Called when device driver first sees a request. elevator_deactivate_req_fn Called when device driver decides to delay a request by requeueing it. -elevator_init_fn +elevator_init_fn* elevator_exit_fn Allocate and free any elevator specific storage for a queue. diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt new file mode 100644 index 0000000..e164403 --- /dev/null +++ b/Documentation/block/queue-sysfs.txt @@ -0,0 +1,63 @@ +Queue sysfs files +================= + +This text file will detail the queue files that are located in the sysfs tree +for each block device. Note that stacked devices typically do not export +any settings, since their queue merely functions are a remapping target. +These files are the ones found in the /sys/block/xxx/queue/ directory. + +Files denoted with a RO postfix are readonly and the RW postfix means +read-write. + +hw_sector_size (RO) +------------------- +This is the hardware sector size of the device, in bytes. + +max_hw_sectors_kb (RO) +---------------------- +This is the maximum number of kilobytes supported in a single data transfer. + +max_sectors_kb (RW) +------------------- +This is the maximum number of kilobytes that the block layer will allow +for a filesystem request. Must be smaller than or equal to the maximum +size allowed by the hardware. + +nomerges (RW) +------------- +This enables the user to disable the lookup logic involved with IO merging +requests in the block layer. Merging may still occur through a direct +1-hit cache, since that comes for (almost) free. The IO scheduler will not +waste cycles doing tree/hash lookups for merges if nomerges is 1. Defaults +to 0, enabling all merges. + +nr_requests (RW) +---------------- +This controls how many requests may be allocated in the block layer for +read or write requests. Note that the total allocated number may be twice +this amount, since it applies only to reads or writes (not the accumulated +sum). + +read_ahead_kb (RW) +------------------ +Maximum number of kilobytes to read-ahead for filesystems on this block +device. + +rq_affinity (RW) +---------------- +If this option is enabled, the block layer will migrate request completions +to the CPU that originally submitted the request. For some workloads +this provides a significant reduction in CPU cycles due to caching effects. + +scheduler (RW) +-------------- +When read, this file will display the current and available IO schedulers +for this block device. The currently active IO scheduler will be enclosed +in [] brackets. Writing an IO scheduler name to this file will switch +control of this block device to that new IO scheduler. Note that writing +an IO scheduler name to this file will attempt to load that IO scheduler +module, if it isn't already present in the system. + + + +Jens Axboe <jens.axboe@oracle.com>, February 2009 diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt index 19533f9..523a9c1 100644 --- a/Documentation/cgroups/memcg_test.txt +++ b/Documentation/cgroups/memcg_test.txt @@ -1,6 +1,6 @@ Memory Resource Controller(Memcg) Implementation Memo. -Last Updated: 2008/12/15 -Base Kernel Version: based on 2.6.28-rc8-mm. +Last Updated: 2009/1/19 +Base Kernel Version: based on 2.6.29-rc2. Because VM is getting complex (one of reasons is memcg...), memcg's behavior is complex. This is a document for memcg's internal behavior. @@ -340,3 +340,23 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. # mount -t cgroup none /cgroup -t cpuset,memory,cpu,devices and do task move, mkdir, rmdir etc...under this. + + 9.7 swapoff. + Besides management of swap is one of complicated parts of memcg, + call path of swap-in at swapoff is not same as usual swap-in path.. + It's worth to be tested explicitly. + + For example, test like following is good. + (Shell-A) + # mount -t cgroup none /cgroup -t memory + # mkdir /cgroup/test + # echo 40M > /cgroup/test/memory.limit_in_bytes + # echo 0 > /cgroup/test/tasks + Run malloc(100M) program under this. You'll see 60M of swaps. + (Shell-B) + # move all tasks in /cgroup/test to /cgroup + # /sbin/swapoff -a + # rmdir /test/cgroup + # kill malloc task. + + Of course, tmpfs v.s. swapoff test should be tested, too. diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index bbebc3a..a87be42 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -2027,6 +2027,34 @@ increase the likelihood of this process being killed by the oom-killer. Valid values are in the range -16 to +15, plus the special value -17, which disables oom-killing altogether for this process. +The process to be killed in an out-of-memory situation is selected among all others +based on its badness score. This value equals the original memory size of the process +and is then updated according to its CPU time (utime + stime) and the +run time (uptime - start time). The longer it runs the smaller is the score. +Badness score is divided by the square root of the CPU time and then by +the double square root of the run time. + +Swapped out tasks are killed first. Half of each child's memory size is added to +the parent's score if they do not share the same memory. Thus forking servers +are the prime candidates to be killed. Having only one 'hungry' child will make +parent less preferable than the child. + +/proc/<pid>/oom_score shows process' current badness score. + +The following heuristics are then applied: + * if the task was reniced, its score doubles + * superuser or direct hardware access tasks (CAP_SYS_ADMIN, CAP_SYS_RESOURCE + or CAP_SYS_RAWIO) have their score divided by 4 + * if oom condition happened in one cpuset and checked task does not belong + to it, its score is divided by 8 + * the resulting score is multiplied by two to the power of oom_adj, i.e. + points <<= oom_adj when it is positive and + points >>= -(oom_adj) otherwise + +The task with the highest badness score is then selected and its children +are killed, process itself will be killed in an OOM situation when it does +not have children or some of them disabled oom like described above. + 2.13 /proc/<pid>/oom_score - Display current oom-killer score ------------------------------------------------------------- diff --git a/Documentation/ja_JP/stable_kernel_rules.txt b/Documentation/ja_JP/stable_kernel_rules.txt index b3ffe87..1426583 100644 --- a/Documentation/ja_JP/stable_kernel_rules.txt +++ b/Documentation/ja_JP/stable_kernel_rules.txt @@ -12,11 +12,11 @@ file at first. ================================== これは、 -linux-2.6.24/Documentation/stable_kernel_rules.txt +linux-2.6.29/Documentation/stable_kernel_rules.txt の和訳です。 翻訳団体: JF プロジェクト < http://www.linux.or.jp/JF/ > -翻訳日: 2007/12/30 +翻訳日: 2009/1/14 翻訳者: Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com> 校正者: 武井伸光さん、<takei at webmasters dot gr dot jp> かねこさん (Seiji Kaneko) <skaneko at a2 dot mbn dot or dot jp> @@ -38,12 +38,15 @@ linux-2.6.24/Documentation/stable_kernel_rules.txt - ビルドエラー(CONFIG_BROKENになっているものを除く), oops, ハング、デー タ破壊、現実のセキュリティ問題、その他 "ああ、これはダメだね"という ようなものを修正しなければならない。短く言えば、重大な問題。 + - 新しい device ID とクオークも受け入れられる。 - どのように競合状態が発生するかの説明も一緒に書かれていない限り、 "理論的には競合状態になる"ようなものは不可。 - いかなる些細な修正も含めることはできない。(スペルの修正、空白のクリー ンアップなど) - - 対応するサブシステムメンテナが受け入れたものでなければならない。 - Documentation/SubmittingPatches の規則に従ったものでなければならない。 + - パッチ自体か同等の修正が Linus のツリーに既に存在しなければならない。 + Linus のツリーでのコミットID を -stable へのパッチ投稿の際に引用す + ること。 -stable ツリーにパッチを送付する手続き- @@ -52,8 +55,10 @@ linux-2.6.24/Documentation/stable_kernel_rules.txt - 送信者はパッチがキューに受け付けられた際には ACK を、却下された場合 には NAK を受け取る。この反応は開発者たちのスケジュールによって、数 日かかる場合がある。 - - もし受け取られたら、パッチは他の開発者たちのレビューのために - -stable キューに追加される。 + - もし受け取られたら、パッチは他の開発者たちと関連するサブシステムの + メンテナーによるレビューのために -stable キューに追加される。 + - パッチに stable@kernel.org のアドレスが付加されているときには、それ + が Linus のツリーに入る時に自動的に stable チームに email される。 - セキュリティパッチはこのエイリアス (stable@kernel.org) に送られるべ きではなく、代わりに security@kernel.org のアドレスに送られる。 diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d8362cf..b182626 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -937,6 +937,8 @@ and is between 256 and 4096 characters. It is defined in the file intel_iommu= [DMAR] Intel IOMMU driver (DMAR) option + on + Enable intel iommu driver. off Disable intel iommu driver. igfx_off [Default Off] diff --git a/Documentation/lguest/Makefile b/Documentation/lguest/Makefile index 725eef8..1f4f9e8 100644 --- a/Documentation/lguest/Makefile +++ b/Documentation/lguest/Makefile @@ -1,5 +1,5 @@ # This creates the demonstration utility "lguest" which runs a Linux guest. -CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include +CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE LDLIBS:=-lz all: lguest diff --git a/Documentation/networking/alias.txt b/Documentation/networking/alias.txt index cd12c2f..85046f5 100644 --- a/Documentation/networking/alias.txt +++ b/Documentation/networking/alias.txt @@ -2,13 +2,13 @@ IP-Aliasing: ============ -IP-aliases are additional IP-addresses/masks hooked up to a base -interface by adding a colon and a string when running ifconfig. -This string is usually numeric, but this is not a must. - -IP-Aliases are avail if CONFIG_INET (`standard' IPv4 networking) -is configured in the kernel. +IP-aliases are an obsolete way to manage multiple IP-addresses/masks +per interface. Newer tools such as iproute2 support multiple +address/prefixes per interface, but aliases are still supported +for backwards compatibility. +An alias is formed by adding a colon and a string when running ifconfig. +This string is usually numeric, but this is not a must. o Alias creation. Alias creation is done by 'magic' interface naming: eg. to create a @@ -38,16 +38,3 @@ o Relationship with main device If the base device is shut down the added aliases will be deleted too. - - -Contact -------- -Please finger or e-mail me: - Juan Jose Ciarlante <jjciarla@raiz.uncu.edu.ar> - -Updated by Erik Schoenfelder <schoenfr@gaertner.DE> - -; local variables: -; mode: indented-text -; mode: auto-fill -; end: diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt new file mode 100644 index 0000000..8447fd7 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt @@ -0,0 +1,180 @@ +MPC5200 Device Tree Bindings +---------------------------- + +(c) 2006-2009 Secret Lab Technologies Ltd +Grant Likely <grant.likely@secretlab.ca> + +Naming conventions +------------------ +For mpc5200 on-chip devices, the format for each compatible value is +<chip>-<device>[-<mode>]. The OS should be able to match a device driver +to the device based solely on the compatible value. If two drivers +match on the compatible list; the 'most compatible' driver should be +selected. + +The split between the MPC5200 and the MPC5200B leaves a bit of a +conundrum. How should the compatible property be set up to provide +maximum compatibility information; but still accurately describe the +chip? For the MPC5200; the answer is easy. Most of the SoC devices +originally appeared on the MPC5200. Since they didn't exist anywhere +else; the 5200 compatible properties will contain only one item; +"fsl,mpc5200-<device>". + +The 5200B is almost the same as the 5200, but not quite. It fixes +silicon bugs and it adds a small number of enhancements. Most of the +devices either provide exactly the same interface as on the 5200. A few +devices have extra functions but still have a backwards compatible mode. +To express this information as completely as possible, 5200B device trees +should have two items in the compatible list: + compatible = "fsl,mpc5200b-<device>","fsl,mpc5200-<device>"; + +It is *strongly* recommended that 5200B device trees follow this convention +(instead of only listing the base mpc5200 item). + +ie. ethernet on mpc5200: compatible = "fsl,mpc5200-fec"; + ethernet on mpc5200b: compatible = "fsl,mpc5200b-fec", "fsl,mpc5200-fec"; + +Modal devices, like PSCs, also append the configured function to the +end of the compatible field. ie. A PSC in i2s mode would specify +"fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s". This convention is chosen to +avoid naming conflicts with non-psc devices providing the same +function. For example, "fsl,mpc5200-spi" and "fsl,mpc5200-psc-spi" describe +the mpc5200 simple spi device and a PSC spi mode respectively. + +At the time of writing, exact chip may be either 'fsl,mpc5200' or +'fsl,mpc5200b'. + +The soc node +------------ +This node describes the on chip SOC peripherals. Every mpc5200 based +board will have this node, and as such there is a common naming +convention for SOC devices. + +Required properties: +name description +---- ----------- +ranges Memory range of the internal memory mapped registers. + Should be <0 [baseaddr] 0xc000> +reg Should be <[baseaddr] 0x100> +compatible mpc5200: "fsl,mpc5200-immr" + mpc5200b: "fsl,mpc5200b-immr" +system-frequency 'fsystem' frequency in Hz; XLB, IPB, USB and PCI + clocks are derived from the fsystem clock. +bus-frequency IPB bus frequency in Hz. Clock rate + used by most of the soc devices. + +soc child nodes +--------------- +Any on chip SOC devices available to Linux must appear as soc5200 child nodes. + +Note: The tables below show the value for the mpc5200. A mpc5200b device +tree should use the "fsl,mpc5200b-<device>","fsl,mpc5200-<device>" form. + +Required soc5200 child nodes: +name compatible Description +---- ---------- ----------- +cdm@<addr> fsl,mpc5200-cdm Clock Distribution +interrupt-controller@<addr> fsl,mpc5200-pic need an interrupt + controller to boot +bestcomm@<addr> fsl,mpc5200-bestcomm Bestcomm DMA controller + +Recommended soc5200 child nodes; populate as needed for your board +name compatible Description +---- ---------- ----------- +timer@<addr> fsl,mpc5200-gpt General purpose timers +gpio@<addr> fsl,mpc5200-gpio MPC5200 simple gpio controller +gpio@<addr> fsl,mpc5200-gpio-wkup MPC5200 wakeup gpio controller +rtc@<addr> fsl,mpc5200-rtc Real time clock +mscan@<addr> fsl,mpc5200-mscan CAN bus controller +pci@<addr> fsl,mpc5200-pci PCI bridge +serial@<addr> fsl,mpc5200-psc-uart PSC in serial mode +i2s@<addr> fsl,mpc5200-psc-i2s PSC in i2s mode +ac97@<addr> fsl,mpc5200-psc-ac97 PSC in ac97 mode +spi@<addr> fsl,mpc5200-psc-spi PSC in spi mode +irda@<addr> fsl,mpc5200-psc-irda PSC in IrDA mode +spi@<addr> fsl,mpc5200-spi MPC5200 spi device +ethernet@<addr> fsl,mpc5200-fec MPC5200 ethernet device +ata@<addr> fsl,mpc5200-ata IDE ATA interface +i2c@<addr> fsl,mpc5200-i2c I2C controller +usb@<addr> fsl,mpc5200-ohci,ohci-be USB controller +xlb@<addr> fsl,mpc5200-xlb XLB arbitrator + +fsl,mpc5200-gpt nodes +--------------------- +On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board +design supports the internal wdt, then the device node for GPT0 should +include the empty property 'fsl,has-wdt'. + +An mpc5200-gpt can be used as a single line GPIO controller. To do so, +add the following properties to the gpt node: + gpio-controller; + #gpio-cells = <2>; +When referencing the GPIO line from another node, the first cell must always +be zero and the second cell represents the gpio flags and described in the +gpio device tree binding. + +An mpc5200-gpt can be used as a single line edge sensitive interrupt +controller. To do so, add the following properties to the gpt node: + interrupt-controller; + #interrupt-cells = <1>; +When referencing the IRQ line from another node, the cell represents the +sense mode; 1 for edge rising, 2 for edge falling. + +fsl,mpc5200-psc nodes +--------------------- +The PSCs should include a cell-index which is the index of the PSC in +hardware. cell-index is used to determine which shared SoC registers to +use when setting up PSC clocking. cell-index number starts at '0'. ie: + PSC1 has 'cell-index = <0>' + PSC4 has 'cell-index = <3>' + +PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in +i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the +compatible field. + + +fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nodes +------------------------------------------------ +Each GPIO controller node should have the empty property gpio-controller and +#gpio-cells set to 2. First cell is the GPIO number which is interpreted +according to the bit numbers in the GPIO control registers. The second cell +is for flags which is currently unused. + +fsl,mpc5200-fec nodes +--------------------- +The FEC node can specify one of the following properties to configure +the MII link: +- fsl,7-wire-mode - An empty property that specifies the link uses 7-wire + mode instead of MII +- current-speed - Specifies that the MII should be configured for a fixed + speed. This property should contain two cells. The + first cell specifies the speed in Mbps and the second + should be '0' for half duplex and '1' for full duplex +- phy-handle - Contains a phandle to an Ethernet PHY. + +Interrupt controller (fsl,mpc5200-pic) node +------------------------------------------- +The mpc5200 pic binding splits hardware IRQ numbers into two levels. The +split reflects the layout of the PIC hardware itself, which groups +interrupts into one of three groups; CRIT, MAIN or PERP. Also, the +Bestcomm dma engine has it's own set of interrupt sources which are +cascaded off of peripheral interrupt 0, which the driver interprets as a +fourth group, SDMA. + +The interrupts property for device nodes using the mpc5200 pic consists +of three cells; <L1 L2 level> + + L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3] + L2 := interrupt number; directly mapped from the value in the + "ICTL PerStat, MainStat, CritStat Encoded Register" + level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3] + +For external IRQs, use the following interrupt property values (how to +specify external interrupts is a frequently asked question): +External interrupts: + external irq0: interrupts = <0 0 n>; + external irq1: interrupts = <1 1 n>; + external irq2: interrupts = <1 2 n>; + external irq3: interrupts = <1 3 n>; +'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low) + diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt deleted file mode 100644 index 6f12f1c..0000000 --- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt +++ /dev/null @@ -1,277 +0,0 @@ -MPC5200 Device Tree Bindings ----------------------------- - -(c) 2006-2007 Secret Lab Technologies Ltd -Grant Likely <grant.likely at secretlab.ca> - -********** DRAFT *********** -* WARNING: Do not depend on the stability of these bindings just yet. -* The MPC5200 device tree conventions are still in flux -* Keep an eye on the linuxppc-dev mailing list for more details -********** DRAFT *********** - -I - Introduction -================ -Boards supported by the arch/powerpc architecture require device tree be -passed by the boot loader to the kernel at boot time. The device tree -describes what devices are present on the board and how they are -connected. The device tree can either be passed as a binary blob (as -described in Documentation/powerpc/booting-without-of.txt), or passed -by Open Firmware (IEEE 1275) compatible firmware using an OF compatible -client interface API. - -This document specifies the requirements on the device-tree for mpc5200 -based boards. These requirements are above and beyond the details -specified in either the Open Firmware spec or booting-without-of.txt - -All new mpc5200-based boards are expected to match this document. In -cases where this document is not sufficient to support a new board port, -this document should be updated as part of adding the new board support. - -II - Philosophy -=============== -The core of this document is naming convention. The whole point of -defining this convention is to reduce or eliminate the number of -special cases required to support a 5200 board. If all 5200 boards -follow the same convention, then generic 5200 support code will work -rather than coding special cases for each new board. - -This section tries to capture the thought process behind why the naming -convention is what it is. - -1. names ---------- -There is strong convention/requirements already established for children -of the root node. 'cpus' describes the processor cores, 'memory' -describes memory, and 'chosen' provides boot configuration. Other nodes -are added to describe devices attached to the processor local bus. - -Following convention already established with other system-on-chip -processors, 5200 device trees should use the name 'soc5200' for the -parent node of on chip devices, and the root node should be its parent. - -Child nodes are typically named after the configured function. ie. -the FEC node is named 'ethernet', and a PSC in uart mode is named 'serial'. - -2. device_type property ------------------------ -similar to the node name convention above; the device_type reflects the -configured function of a device. ie. 'serial' for a uart and 'spi' for -an spi controller. However, while node names *should* reflect the -configured function, device_type *must* match the configured function -exactly. - -3. compatible property ----------------------- -Since device_type isn't enough to match devices to drivers, there also -needs to be a naming convention for the compatible property. Compatible -is an list of device descriptions sorted from specific to generic. For -the mpc5200, the required format for each compatible value is -<chip>-<device>[-<mode>]. The OS should be able to match a device driver -to the device based solely on the compatible value. If two drivers -match on the compatible list; the 'most compatible' driver should be -selected. - -The split between the MPC5200 and the MPC5200B leaves a bit of a -conundrum. How should the compatible property be set up to provide -maximum compatibility information; but still accurately describe the -chip? For the MPC5200; the answer is easy. Most of the SoC devices -originally appeared on the MPC5200. Since they didn't exist anywhere -else; the 5200 compatible properties will contain only one item; -"mpc5200-<device>". - -The 5200B is almost the same as the 5200, but not quite. It fixes -silicon bugs and it adds a small number of enhancements. Most of the -devices either provide exactly the same interface as on the 5200. A few -devices have extra functions but still have a backwards compatible mode. -To express this information as completely as possible, 5200B device trees -should have two items in the compatible list; -"mpc5200b-<device>\0mpc5200-<device>". It is *strongly* recommended -that 5200B device trees follow this convention (instead of only listing -the base mpc5200 item). - -If another chip appear on the market with one of the mpc5200 SoC -devices, then the compatible list should include mpc5200-<device>. - -ie. ethernet on mpc5200: compatible = "mpc5200-ethernet" - ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc5200-ethernet" - -Modal devices, like PSCs, also append the configured function to the -end of the compatible field. ie. A PSC in i2s mode would specify -"mpc5200-psc-i2s", not "mpc5200-i2s". This convention is chosen to -avoid naming conflicts with non-psc devices providing the same -function. For example, "mpc5200-spi" and "mpc5200-psc-spi" describe -the mpc5200 simple spi device and a PSC spi mode respectively. - -If the soc device is more generic and present on other SOCs, the -compatible property can specify the more generic device type also. - -ie. mscan: compatible = "mpc5200-mscan\0fsl,mscan"; - -At the time of writing, exact chip may be either 'mpc5200' or -'mpc5200b'. - -Device drivers should always try to match as generically as possible. - -III - Structure -=============== -The device tree for an mpc5200 board follows the structure defined in -booting-without-of.txt with the following additional notes: - -0) the root node ----------------- -Typical root description node; see booting-without-of - -1) The cpus node ----------------- -The cpus node follows the basic layout described in booting-without-of. -The bus-frequency property holds the XLB bus frequency -The clock-frequency property holds the core frequency - -2) The memory node ------------------- -Typical memory description node; see booting-without-of. - -3) The soc5200 node -------------------- -This node describes the on chip SOC peripherals. Every mpc5200 based -board will have this node, and as such there is a common naming -convention for SOC devices. - -Required properties: -name type description ----- ---- ----------- -device_type string must be "soc" -ranges int should be <0 baseaddr baseaddr+10000> -reg int must be <baseaddr 10000> -compatible string mpc5200: "mpc5200-soc" - mpc5200b: "mpc5200b-soc\0mpc5200-soc" -system-frequency int Fsystem frequency; source of all - other clocks. -bus-frequency int IPB bus frequency in HZ. Clock rate - used by most of the soc devices. -#interrupt-cells int must be <3>. - -Recommended properties: -name type description ----- ---- ----------- -model string Exact model of the chip; - ie: model="fsl,mpc5200" -revision string Silicon revision of chip - ie: revision="M08A" - -The 'model' and 'revision' properties are *strongly* recommended. Having -them presence acts as a bit of a safety net for working around as yet -undiscovered bugs on one version of silicon. For example, device drivers -can use the model and revision properties to decide if a bug fix should -be turned on. - -4) soc5200 child nodes ----------------------- -Any on chip SOC devices available to Linux must appear as soc5200 child nodes. - -Note: The tables below show the value for the mpc5200. A mpc5200b device -tree should use the "mpc5200b-<device>\0mpc5200-<device> form. - -Required soc5200 child nodes: -name device_type compatible Description ----- ----------- ---------- ----------- -cdm@<addr> cdm mpc5200-cmd Clock Distribution -pic@<addr> interrupt-controller mpc5200-pic need an interrupt - controller to boot -bestcomm@<addr> dma-controller mpc5200-bestcomm 5200 pic also requires - the bestcomm device - -Recommended soc5200 child nodes; populate as needed for your board -name device_type compatible Description ----- ----------- ---------- ----------- -gpt@<addr> gpt fsl,mpc5200-gpt General purpose timers -gpt@<addr> gpt fsl,mpc5200-gpt-gpio General purpose - timers in GPIO mode -gpio@<addr> fsl,mpc5200-gpio MPC5200 simple gpio - controller -gpio@<addr> fsl,mpc5200-gpio-wkup MPC5200 wakeup gpio - controller -rtc@<addr> rtc mpc5200-rtc Real time clock -mscan@<addr> mscan mpc5200-mscan CAN bus controller -pci@<addr> pci mpc5200-pci PCI bridge -serial@<addr> serial mpc5200-psc-uart PSC in serial mode -i2s@<addr> sound mpc5200-psc-i2s PSC in i2s mode -ac97@<addr> sound mpc5200-psc-ac97 PSC in ac97 mode -spi@<addr> spi mpc5200-psc-spi PSC in spi mode -irda@<addr> irda mpc5200-psc-irda PSC in IrDA mode -spi@<addr> spi mpc5200-spi MPC5200 spi device -ethernet@<addr> network mpc5200-fec MPC5200 ethernet device -ata@<addr> ata mpc5200-ata IDE ATA interface -i2c@<addr> i2c mpc5200-i2c I2C controller -usb@<addr> usb-ohci-be mpc5200-ohci,ohci-be USB controller -xlb@<addr> xlb mpc5200-xlb XLB arbitrator - -Important child node properties -name type description ----- ---- ----------- -cell-index int When multiple devices are present, is the - index of the device in the hardware (ie. There - are 6 PSC on the 5200 numbered PSC1 to PSC6) - PSC1 has 'cell-index = <0>' - PSC4 has 'cell-index = <3>' - -5) General Purpose Timer nodes (child of soc5200 node) -On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board -design supports the internal wdt, then the device node for GPT0 should -include the empty property 'fsl,has-wdt'. - -6) PSC nodes (child of soc5200 node) -PSC nodes can define the optional 'port-number' property to force assignment -order of serial ports. For example, PSC5 might be physically connected to -the port labeled 'COM1' and PSC1 wired to 'COM1'. In this case, PSC5 would -have a "port-number = <0>" property, and PSC1 would have "port-number = <1>". - -PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in -i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the -compatible field. - -7) GPIO controller nodes -Each GPIO controller node should have the empty property gpio-controller and -#gpio-cells set to 2. First cell is the GPIO number which is interpreted -according to the bit numbers in the GPIO control registers. The second cell -is for flags which is currently unsused. - -8) FEC nodes -The FEC node can specify one of the following properties to configure -the MII link: -"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire - mode instead of MII -"current-speed" - Specifies that the MII should be configured for a fixed - speed. This property should contain two cells. The - first cell specifies the speed in Mbps and the second - should be '0' for half duplex and '1' for full duplex -"phy-handle" - Contains a phandle to an Ethernet PHY. - -IV - Extra Notes -================ - -1. Interrupt mapping --------------------- -The mpc5200 pic driver splits hardware IRQ numbers into two levels. The -split reflects the layout of the PIC hardware itself, which groups -interrupts into one of three groups; CRIT, MAIN or PERP. Also, the -Bestcomm dma engine has it's own set of interrupt sources which are -cascaded off of peripheral interrupt 0, which the driver interprets as a -fourth group, SDMA. - -The interrupts property for device nodes using the mpc5200 pic consists -of three cells; <L1 L2 level> - - L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3] - L2 := interrupt number; directly mapped from the value in the - "ICTL PerStat, MainStat, CritStat Encoded Register" - level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3] - -2. Shared registers -------------------- -Some SoC devices share registers between them. ie. the i2c devices use -a single clock control register, and almost all device are affected by -the port_config register. Devices which need to manipulate shared regs -should look to the parent SoC node. The soc node is responsible -for arbitrating all shared register access. diff --git a/Documentation/usb/dma.txt b/Documentation/usb/dma.txt index e8b50b7..cfdcd16 100644 --- a/Documentation/usb/dma.txt +++ b/Documentation/usb/dma.txt @@ -6,8 +6,9 @@ in the kernel usb programming guide (kerneldoc, from the source code). API OVERVIEW The big picture is that USB drivers can continue to ignore most DMA issues, -though they still must provide DMA-ready buffers (see DMA-mapping.txt). -That's how they've worked through the 2.4 (and earlier) kernels. +though they still must provide DMA-ready buffers (see +Documentation/PCI/PCI-DMA-mapping.txt). That's how they've worked through +the 2.4 (and earlier) kernels. OR: they can now be DMA-aware. @@ -62,8 +63,8 @@ and effects like cache-trashing can impose subtle penalties. force a consistent memory access ordering by using memory barriers. It's not using a streaming DMA mapping, so it's good for small transfers on systems where the I/O would otherwise thrash an IOMMU mapping. (See - Documentation/DMA-mapping.txt for definitions of "coherent" and "streaming" - DMA mappings.) + Documentation/PCI/PCI-DMA-mapping.txt for definitions of "coherent" and + "streaming" DMA mappings.) Asking for 1/Nth of a page (as well as asking for N pages) is reasonably space-efficient. @@ -93,7 +94,7 @@ WORKING WITH EXISTING BUFFERS Existing buffers aren't usable for DMA without first being mapped into the DMA address space of the device. However, most buffers passed to your driver can safely be used with such DMA mapping. (See the first section -of DMA-mapping.txt, titled "What memory is DMA-able?") +of Documentation/PCI/PCI-DMA-mapping.txt, titled "What memory is DMA-able?") - When you're using scatterlists, you can map everything at once. On some systems, this kicks in an IOMMU and turns the scatterlists into single diff --git a/Documentation/video4linux/v4lgrab.c b/Documentation/video4linux/v4lgrab.c index 079b628..d6e70be 100644 --- a/Documentation/video4linux/v4lgrab.c +++ b/Documentation/video4linux/v4lgrab.c @@ -4,12 +4,21 @@ * * Compile with: * gcc -s -Wall -Wstrict-prototypes v4lgrab.c -o v4lgrab - * Use as: - * v4lgrab >image.ppm + * Use as: + * v4lgrab >image.ppm * * Copyright (C) 1998-05-03, Phil Blundell <philb@gnu.org> - * Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c - * with minor modifications (Dave Forrest, drf5n@virginia.edu). + * Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c + * with minor modifications (Dave Forrest, drf5n@virginia.edu). + * + * + * For some cameras you may need to pre-load libv4l to perform + * the necessary decompression, e.g.: + * + * export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so + * ./v4lgrab >image.ppm + * + * see http://hansdegoede.livejournal.com/3636.html for details. * */ @@ -24,7 +33,7 @@ #include <linux/types.h> #include <linux/videodev.h> -#define FILE "/dev/video0" +#define VIDEO_DEV "/dev/video0" /* Stole this from tvset.c */ @@ -90,7 +99,7 @@ int get_brightness_adj(unsigned char *image, long size, int *brightness) { int main(int argc, char ** argv) { - int fd = open(FILE, O_RDONLY), f; + int fd = open(VIDEO_DEV, O_RDONLY), f; struct video_capability cap; struct video_window win; struct video_picture vpic; @@ -100,13 +109,13 @@ int main(int argc, char ** argv) unsigned int i, src_depth; if (fd < 0) { - perror(FILE); + perror(VIDEO_DEV); exit(1); } if (ioctl(fd, VIDIOCGCAP, &cap) < 0) { perror("VIDIOGCAP"); - fprintf(stderr, "(" FILE " not a video4linux device?)\n"); + fprintf(stderr, "(" VIDEO_DEV " not a video4linux device?)\n"); close(fd); exit(1); } diff --git a/MAINTAINERS b/MAINTAINERS index d992d40..cf0ab3a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2836,8 +2836,6 @@ S: Maintained MAC80211 P: Johannes Berg M: johannes@sipsolutions.net -P: Michael Wu -M: flamingice@sourmilk.net L: linux-wireless@vger.kernel.org W: http://linuxwireless.org/ T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git @@ -4843,6 +4841,7 @@ P: Ingo Molnar M: mingo@redhat.com P: H. Peter Anvin M: hpa@zytor.com +M: x86@kernel.org L: linux-kernel@vger.kernel.org T: git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git S: Maintained diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 6110197..9fb8aae 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -8,6 +8,7 @@ config ALPHA select HAVE_AOUT select HAVE_IDE select HAVE_OPROFILE + select HAVE_SYSCALL_WRAPPERS help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, diff --git a/arch/alpha/include/asm/bug.h b/arch/alpha/include/asm/bug.h index 695a5ee..7b85b7c 100644 --- a/arch/alpha/include/asm/bug.h +++ b/arch/alpha/include/asm/bug.h @@ -8,17 +8,12 @@ /* ??? Would be nice to use .gprel32 here, but we can't be sure that the function loaded the GP, so this could fail in modules. */ -static inline void ATTRIB_NORET __BUG(const char *file, int line) -{ - __asm__ __volatile__( - "call_pal %0 # bugchk\n\t" - ".long %1\n\t.8byte %2" - : : "i" (PAL_bugchk), "i"(line), "i"(file)); - for ( ; ; ) - ; -} - -#define BUG() __BUG(__FILE__, __LINE__) +#define BUG() { \ + __asm__ __volatile__( \ + "call_pal %0 # bugchk\n\t" \ + ".long %1\n\t.8byte %2" \ + : : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__)); \ + for ( ; ; ); } #define HAVE_ARCH_BUG #endif diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h index a5801ae..04eb568 100644 --- a/arch/alpha/include/asm/dma-mapping.h +++ b/arch/alpha/include/asm/dma-mapping.h @@ -29,6 +29,8 @@ #else /* no PCI - no IOMMU. */ +#include <asm/io.h> /* for virt_to_phys() */ + struct scatterlist; void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp); diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index aa2e50c..e4a54b615 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -933,7 +933,7 @@ sys_execve: osf_sigprocmask: .prologue 0 mov $sp, $18 - jmp $31, do_osf_sigprocmask + jmp $31, sys_osf_sigprocmask .end osf_sigprocmask .align 4 diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 18a3ea1..ae41f09 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -54,8 +54,7 @@ extern int do_pipe(int *); * identical to OSF as we don't return 0 on success, but doing otherwise * would require changes to libc. Hopefully this is good enough. */ -asmlinkage unsigned long -osf_brk(unsigned long brk) +SYSCALL_DEFINE1(osf_brk, unsigned long, brk) { unsigned long retval = sys_brk(brk); if (brk && brk != retval) @@ -66,9 +65,9 @@ osf_brk(unsigned long brk) /* * This is pure guess-work.. */ -asmlinkage int -osf_set_program_attributes(unsigned long text_start, unsigned long text_len, - unsigned long bss_start, unsigned long bss_len) +SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start, + unsigned long, text_len, unsigned long, bss_start, + unsigned long, bss_len) { struct mm_struct *mm; @@ -146,9 +145,9 @@ Efault: return -EFAULT; } -asmlinkage int -osf_getdirentries(unsigned int fd, struct osf_dirent __user *dirent, - unsigned int count, long __user *basep) +SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd, + struct osf_dirent __user *, dirent, unsigned int, count, + long __user *, basep) { int error; struct file *file; @@ -177,9 +176,9 @@ osf_getdirentries(unsigned int fd, struct osf_dirent __user *dirent, #undef NAME_OFFSET -asmlinkage unsigned long -osf_mmap(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long off) +SYSCALL_DEFINE6(osf_mmap, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + unsigned long, off) { struct file *file = NULL; unsigned long ret = -EBADF; @@ -254,8 +253,8 @@ do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer, return error; } -asmlinkage int -osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz) +SYSCALL_DEFINE3(osf_statfs, char __user *, pathname, + struct osf_statfs __user *, buffer, unsigned long, bufsiz) { struct path path; int retval; @@ -268,8 +267,8 @@ osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned lon return retval; } -asmlinkage int -osf_fstatfs(unsigned long fd, struct osf_statfs __user *buffer, unsigned long bufsiz) +SYSCALL_DEFINE3(osf_fstatfs, unsigned long, fd, + struct osf_statfs __user *, buffer, unsigned long, bufsiz) { struct file *file; int retval; @@ -368,8 +367,8 @@ osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags) return do_mount("", dirname, "proc", flags, NULL); } -asmlinkage int -osf_mount(unsigned long typenr, char __user *path, int flag, void __user *data) +SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path, + int, flag, void __user *, data) { int retval = -EINVAL; char *name; @@ -399,8 +398,7 @@ osf_mount(unsigned long typenr, char __user *path, int flag, void __user *data) return retval; } -asmlinkage int -osf_utsname(char __user *name) +SYSCALL_DEFINE1(osf_utsname, char __user *, name) { int error; @@ -423,14 +421,12 @@ osf_utsname(char __user *name) return error; } -asmlinkage unsigned long -sys_getpagesize(void) +SYSCALL_DEFINE0(getpagesize) { return PAGE_SIZE; } -asmlinkage unsigned long -sys_getdtablesize(void) +SYSCALL_DEFINE0(getdtablesize) { return sysctl_nr_open; } @@ -438,8 +434,7 @@ sys_getdtablesize(void) /* * For compatibility with OSF/1 only. Use utsname(2) instead. */ -asmlinkage int -osf_getdomainname(char __user *name, int namelen) +SYSCALL_DEFINE2(osf_getdomainname, char __user *, name, int, namelen) { unsigned len; int i; @@ -527,8 +522,8 @@ enum pl_code { PL_DEL = 5, PL_FDEL = 6 }; -asmlinkage long -osf_proplist_syscall(enum pl_code code, union pl_args __user *args) +SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code, + union pl_args __user *, args) { long error; int __user *min_buf_size_ptr; @@ -567,8 +562,8 @@ osf_proplist_syscall(enum pl_code code, union pl_args __user *args) return error; } -asmlinkage int -osf_sigstack(struct sigstack __user *uss, struct sigstack __user *uoss) +SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss, + struct sigstack __user *, uoss) { unsigned long usp = rdusp(); unsigned long oss_sp = current->sas_ss_sp + current->sas_ss_size; @@ -608,8 +603,7 @@ osf_sigstack(struct sigstack __user *uss, struct sigstack __user *uoss) return error; } -asmlinkage long -osf_sysinfo(int command, char __user *buf, long count) +SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count) { char *sysinfo_table[] = { utsname()->sysname, @@ -647,9 +641,8 @@ osf_sysinfo(int command, char __user *buf, long count) return err; } -asmlinkage unsigned long -osf_getsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes, - int __user *start, void __user *arg) +SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer, + unsigned long, nbytes, int __user *, start, void __user *, arg) { unsigned long w; struct percpu_struct *cpu; @@ -705,9 +698,8 @@ osf_getsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes, return -EOPNOTSUPP; } -asmlinkage unsigned long -osf_setsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes, - int __user *start, void __user *arg) +SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer, + unsigned long, nbytes, int __user *, start, void __user *, arg) { switch (op) { case SSI_IEEE_FP_CONTROL: { @@ -880,8 +872,8 @@ jiffies_to_timeval32(unsigned long jiffies, struct timeval32 *value) value->tv_sec = jiffies / HZ; } -asmlinkage int -osf_gettimeofday(struct timeval32 __user *tv, struct timezone __user *tz) +SYSCALL_DEFINE2(osf_gettimeofday, struct timeval32 __user *, tv, + struct timezone __user *, tz) { if (tv) { struct timeval ktv; @@ -896,8 +888,8 @@ osf_gettimeofday(struct timeval32 __user *tv, struct timezone __user *tz) return 0; } -asmlinkage int -osf_settimeofday(struct timeval32 __user *tv, struct timezone __user *tz) +SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv, + struct timezone __user *, tz) { struct timespec kts; struct timezone ktz; @@ -916,8 +908,7 @@ osf_settimeofday(struct timeval32 __user *tv, struct timezone __user *tz) return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL); } -asmlinkage int -osf_getitimer(int which, struct itimerval32 __user *it) +SYSCALL_DEFINE2(osf_getitimer, int, which, struct itimerval32 __user *, it) { struct itimerval kit; int error; @@ -929,8 +920,8 @@ osf_getitimer(int which, struct itimerval32 __user *it) return error; } -asmlinkage int -osf_setitimer(int which, struct itimerval32 __user *in, struct itimerval32 __user *out) +SYSCALL_DEFINE3(osf_setitimer, int, which, struct itimerval32 __user *, in, + struct itimerval32 __user *, out) { struct itimerval kin, kout; int error; @@ -952,8 +943,8 @@ osf_setitimer(int which, struct itimerval32 __user *in, struct itimerval32 __use } -asmlinkage int -osf_utimes(char __user *filename, struct timeval32 __user *tvs) +SYSCALL_DEFINE2(osf_utimes, char __user *, filename, + struct timeval32 __user *, tvs) { struct timespec tv[2]; @@ -979,9 +970,8 @@ osf_utimes(char __user *filename, struct timeval32 __user *tvs) #define MAX_SELECT_SECONDS \ ((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1) -asmlinkage int -osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, - struct timeval32 __user *tvp) +SYSCALL_DEFINE5(osf_select, int, n, fd_set __user *, inp, fd_set __user *, outp, + fd_set __user *, exp, struct timeval32 __user *, tvp) { struct timespec end_time, *to = NULL; if (tvp) { @@ -1026,8 +1016,7 @@ struct rusage32 { long ru_nivcsw; /* involuntary " */ }; -asmlinkage int -osf_getrusage(int who, struct rusage32 __user *ru) +SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru) { struct rusage32 r; @@ -1053,9 +1042,8 @@ osf_getrusage(int who, struct rusage32 __user *ru) return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0; } -asmlinkage long -osf_wait4(pid_t pid, int __user *ustatus, int options, - struct rusage32 __user *ur) +SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options, + struct rusage32 __user *, ur) { struct rusage r; long ret, err; @@ -1101,8 +1089,8 @@ osf_wait4(pid_t pid, int __user *ustatus, int options, * seems to be a timeval pointer, and I suspect the second * one is the time remaining.. Ho humm.. No documentation. */ -asmlinkage int -osf_usleep_thread(struct timeval32 __user *sleep, struct timeval32 __user *remain) +SYSCALL_DEFINE2(osf_usleep_thread, struct timeval32 __user *, sleep, + struct timeval32 __user *, remain) { struct timeval tmp; unsigned long ticks; @@ -1155,8 +1143,7 @@ struct timex32 { int :32; int :32; int :32; int :32; }; -asmlinkage int -sys_old_adjtimex(struct timex32 __user *txc_p) +SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p) { struct timex txc; int ret; @@ -1267,8 +1254,8 @@ osf_fix_iov_len(const struct iovec __user *iov, unsigned long count) return 0; } -asmlinkage ssize_t -osf_readv(unsigned long fd, const struct iovec __user * vector, unsigned long count) +SYSCALL_DEFINE3(osf_readv, unsigned long, fd, + const struct iovec __user *, vector, unsigned long, count) { if (unlikely(personality(current->personality) == PER_OSF4)) if (osf_fix_iov_len(vector, count)) @@ -1276,8 +1263,8 @@ osf_readv(unsigned long fd, const struct iovec __user * vector, unsigned long co return sys_readv(fd, vector, count); } -asmlinkage ssize_t -osf_writev(unsigned long fd, const struct iovec __user * vector, unsigned long count) +SYSCALL_DEFINE3(osf_writev, unsigned long, fd, + const struct iovec __user *, vector, unsigned long, count) { if (unlikely(personality(current->personality) == PER_OSF4)) if (osf_fix_iov_len(vector, count)) diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c index 8ac0831..c19a376 100644 --- a/arch/alpha/kernel/pci-noop.c +++ b/arch/alpha/kernel/pci-noop.c @@ -109,7 +109,8 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn, /* Stubs for the routines in pci_iommu.c: */ void * -pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp) +__pci_alloc_consistent(struct pci_dev *pdev, size_t size, + dma_addr_t *dma_addrp, gfp_t gfp) { return NULL; } diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c index 410af4f..df65eaa 100644 --- a/arch/alpha/kernel/signal.c +++ b/arch/alpha/kernel/signal.c @@ -19,6 +19,7 @@ #include <linux/tty.h> #include <linux/binfmts.h> #include <linux/bitops.h> +#include <linux/syscalls.h> #include <asm/uaccess.h> #include <asm/sigcontext.h> @@ -51,8 +52,8 @@ static void do_signal(struct pt_regs *, struct switch_stack *, * Note that we don't need to acquire the kernel lock for SMP * operation, as all of this is local to this thread. */ -asmlinkage unsigned long -do_osf_sigprocmask(int how, unsigned long newmask, struct pt_regs *regs) +SYSCALL_DEFINE3(osf_sigprocmask, int, how, unsigned long, newmask, + struct pt_regs *, regs) { unsigned long oldmask = -EINVAL; @@ -81,9 +82,9 @@ do_osf_sigprocmask(int how, unsigned long newmask, struct pt_regs *regs) return oldmask; } -asmlinkage int -osf_sigaction(int sig, const struct osf_sigaction __user *act, - struct osf_sigaction __user *oact) +SYSCALL_DEFINE3(osf_sigaction, int, sig, + const struct osf_sigaction __user *, act, + struct osf_sigaction __user *, oact) { struct k_sigaction new_ka, old_ka; int ret; @@ -112,10 +113,9 @@ osf_sigaction(int sig, const struct osf_sigaction __user *act, return ret; } -asmlinkage long -sys_rt_sigaction(int sig, const struct sigaction __user *act, - struct sigaction __user *oact, - size_t sigsetsize, void __user *restorer) +SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act, + struct sigaction __user *, oact, + size_t, sigsetsize, void __user *, restorer) { struct k_sigaction new_ka, old_ka; int ret; diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index d953e51..00f1dc3 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -120,8 +120,9 @@ void __cpuinit smp_callin(void) { int cpuid = hard_smp_processor_id(); + cpumask_t mask = cpu_online_map; - if (cpu_test_and_set(cpuid, cpu_online_map)) { + if (cpu_test_and_set(cpuid, mask)) { printk("??, cpu 0x%x already present??\n", cpuid); BUG(); } diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 9d9e3a9..95c9aef 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -17,7 +17,7 @@ sys_call_table: .quad sys_write .quad alpha_ni_syscall /* 5 */ .quad sys_close - .quad osf_wait4 + .quad sys_osf_wait4 .quad alpha_ni_syscall .quad sys_link .quad sys_unlink /* 10 */ @@ -27,11 +27,11 @@ sys_call_table: .quad sys_mknod .quad sys_chmod /* 15 */ .quad sys_chown - .quad osf_brk + .quad sys_osf_brk .quad alpha_ni_syscall .quad sys_lseek .quad sys_getxpid /* 20 */ - .quad osf_mount + .quad sys_osf_mount .quad sys_umount .quad sys_setuid .quad sys_getxuid @@ -53,7 +53,7 @@ sys_call_table: .quad alpha_ni_syscall /* 40 */ .quad sys_dup .quad sys_alpha_pipe - .quad osf_set_program_attributes + .quad sys_osf_set_program_attributes .quad alpha_ni_syscall .quad sys_open /* 45 */ .quad alpha_ni_syscall @@ -81,7 +81,7 @@ sys_call_table: .quad sys_newlstat .quad alpha_ni_syscall .quad alpha_ni_syscall /* 70 */ - .quad osf_mmap + .quad sys_osf_mmap .quad alpha_ni_syscall .quad sys_munmap .quad sys_mprotect @@ -94,17 +94,17 @@ sys_call_table: .quad sys_setgroups /* 80 */ .quad alpha_ni_syscall .quad sys_setpgid - .quad osf_setitimer + .quad sys_osf_setitimer .quad alpha_ni_syscall .quad alpha_ni_syscall /* 85 */ - .quad osf_getitimer + .quad sys_osf_getitimer .quad sys_gethostname .quad sys_sethostname .quad sys_getdtablesize .quad sys_dup2 /* 90 */ .quad sys_newfstat .quad sys_fcntl - .quad osf_select + .quad sys_osf_select .quad sys_poll .quad sys_fsync /* 95 */ .quad sys_setpriority @@ -123,22 +123,22 @@ sys_call_table: .quad alpha_ni_syscall .quad alpha_ni_syscall /* 110 */ .quad sys_sigsuspend - .quad osf_sigstack + .quad sys_osf_sigstack .quad sys_recvmsg .quad sys_sendmsg .quad alpha_ni_syscall /* 115 */ - .quad osf_gettimeofday - .quad osf_getrusage + .quad sys_osf_gettimeofday + .quad sys_osf_getrusage .quad sys_getsockopt .quad alpha_ni_syscall #ifdef CONFIG_OSF4_COMPAT - .quad osf_readv /* 120 */ - .quad osf_writev + .quad sys_osf_readv /* 120 */ + .quad sys_osf_writev #else .quad sys_readv /* 120 */ .quad sys_writev #endif - .quad osf_settimeofday + .quad sys_osf_settimeofday .quad sys_fchown .quad sys_fchmod .quad sys_recvfrom /* 125 */ @@ -154,7 +154,7 @@ sys_call_table: .quad sys_socketpair /* 135 */ .quad sys_mkdir .quad sys_rmdir - .quad osf_utimes + .quad sys_osf_utimes .quad alpha_ni_syscall .quad alpha_ni_syscall /* 140 */ .quad sys_getpeername @@ -172,16 +172,16 @@ sys_call_table: .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall /* 155 */ - .quad osf_sigaction + .quad sys_osf_sigaction .quad alpha_ni_syscall .quad alpha_ni_syscall - .quad osf_getdirentries - .quad osf_statfs /* 160 */ - .quad osf_fstatfs + .quad sys_osf_getdirentries + .quad sys_osf_statfs /* 160 */ + .quad sys_osf_fstatfs .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall - .quad osf_getdomainname /* 165 */ + .quad sys_osf_getdomainname /* 165 */ .quad sys_setdomainname .quad alpha_ni_syscall .quad alpha_ni_syscall @@ -224,7 +224,7 @@ sys_call_table: .quad sys_semctl .quad sys_semget /* 205 */ .quad sys_semop - .quad osf_utsname + .quad sys_osf_utsname .quad sys_lchown .quad sys_shmat .quad sys_shmctl /* 210 */ @@ -258,23 +258,23 @@ sys_call_table: .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall /* 240 */ - .quad osf_sysinfo + .quad sys_osf_sysinfo .quad alpha_ni_syscall .quad alpha_ni_syscall - .quad osf_proplist_syscall + .quad sys_osf_proplist_syscall .quad alpha_ni_syscall /* 245 */ .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall /* 250 */ - .quad osf_usleep_thread + .quad sys_osf_usleep_thread .quad alpha_ni_syscall .quad alpha_ni_syscall .quad sys_sysfs .quad alpha_ni_syscall /* 255 */ - .quad osf_getsysinfo - .quad osf_setsysinfo + .quad sys_osf_getsysinfo + .quad sys_osf_setsysinfo .quad alpha_ni_syscall .quad alpha_ni_syscall .quad alpha_ni_syscall /* 260 */ diff --git a/arch/arm/plat-mxc/include/mach/mmc.h b/arch/arm/plat-mxc/include/mach/mmc.h new file mode 100644 index 0000000..de2128d --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mmc.h @@ -0,0 +1,36 @@ +#ifndef ASMARM_ARCH_MMC_H +#define ASMARM_ARCH_MMC_H + +#include <linux/mmc/host.h> + +struct device; + +/* board specific SDHC data, optional. + * If not present, a writable card with 3,3V is assumed. + */ +struct imxmmc_platform_data { + /* Return values for the get_ro callback should be: + * 0 for a read/write card + * 1 for a read-only card + * -ENOSYS when not supported (equal to NULL callback) + * or a negative errno value when something bad happened + */ + int (*get_ro)(struct device *); + + /* board specific hook to (de)initialize the SD slot. + * The board code can call 'handler' on a card detection + * change giving data as argument. + */ + int (*init)(struct device *dev, irq_handler_t handler, void *data); + void (*exit)(struct device *dev, void *data); + + /* available voltages. If not given, assume + * MMC_VDD_32_33 | MMC_VDD_33_34 + */ + unsigned int ocr_avail; + + /* adjust slot voltage */ + void (*setpower)(struct device *, unsigned int vdd); +}; + +#endif diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index d98f0f4..6d5e6c5 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -906,7 +906,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ dma_addr_t sba_map_single_attrs(struct device *dev, void *addr, size_t size, int dir, @@ -1024,7 +1024,7 @@ sba_mark_clean(struct ioc *ioc, dma_addr_t iova, size_t size) * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ void sba_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size, int dir, struct dma_attrs *attrs) @@ -1102,7 +1102,7 @@ EXPORT_SYMBOL(sba_unmap_single_attrs); * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ void * sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags) @@ -1165,7 +1165,7 @@ sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ void sba_free_coherent (struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) { @@ -1420,7 +1420,7 @@ sba_coalesce_chunks(struct ioc *ioc, struct device *dev, * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents, int dir, struct dma_attrs *attrs) @@ -1512,7 +1512,7 @@ EXPORT_SYMBOL(sba_map_sg_attrs); * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents, int dir, struct dma_attrs *attrs) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 52c80c2..600eef3 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -351,7 +351,7 @@ config SGI_IP27 select ARC64 select BOOT_ELF64 select DEFAULT_SGI_PARTITION - select DMA_IP27 + select DMA_COHERENT select SYS_HAS_EARLY_PRINTK select HW_HAS_PCI select NR_CPUS_DEFAULT_64 @@ -761,9 +761,6 @@ config CFE config DMA_COHERENT bool -config DMA_IP27 - bool - config DMA_NONCOHERENT bool select DMA_NEED_PCI_MAP_STATE @@ -1368,7 +1365,7 @@ config CPU_SUPPORTS_64BIT_KERNEL # config HARDWARE_WATCHPOINTS bool - default y if CPU_MIPS32 || CPU_MIPS64 + default y if CPU_MIPSR1 || CPU_MIPSR2 menu "Kernel type" diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 3288014..6fd441d 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -89,7 +89,7 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = { .irq = AU1000_RTC_MATCH2_INT, .set_next_event = au1x_rtcmatch2_set_next_event, .set_mode = au1x_rtcmatch2_set_mode, - .cpumask = CPU_MASK_ALL, + .cpumask = CPU_MASK_ALL_PTR, }; static struct irqaction au1x_rtcmatch2_irqaction = { diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index e085fed..5f4e49b 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -15,13 +15,11 @@ #include <linux/serial.h> #include <linux/types.h> #include <linux/string.h> /* for memset */ -#include <linux/serial.h> #include <linux/tty.h> #include <linux/time.h> #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> -#include <linux/string.h> #include <asm/processor.h> #include <asm/reboot.h> diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 34ea319..f2baea3 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -53,7 +53,7 @@ CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_ARC=y -CONFIG_DMA_IP27=y +CONFIG_DMA_COHERENT=y CONFIG_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y # CONFIG_NO_IOPORT is not set diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index c996c3b..1b332e1 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -50,7 +50,7 @@ static __inline__ void atomic_add(int i, atomic_t * v) { if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -62,7 +62,7 @@ static __inline__ void atomic_add(int i, atomic_t * v) : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -95,7 +95,7 @@ static __inline__ void atomic_add(int i, atomic_t * v) static __inline__ void atomic_sub(int i, atomic_t * v) { if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -107,7 +107,7 @@ static __inline__ void atomic_sub(int i, atomic_t * v) : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -135,12 +135,12 @@ static __inline__ void atomic_sub(int i, atomic_t * v) */ static __inline__ int atomic_add_return(int i, atomic_t * v) { - unsigned long result; + int result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -154,7 +154,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -187,12 +187,12 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) static __inline__ int atomic_sub_return(int i, atomic_t * v) { - unsigned long result; + int result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -206,7 +206,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -247,12 +247,12 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) */ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) { - unsigned long result; + int result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -270,7 +270,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -429,7 +429,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) static __inline__ void atomic64_add(long i, atomic64_t * v) { if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -441,7 +441,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v) : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -474,7 +474,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v) static __inline__ void atomic64_sub(long i, atomic64_t * v) { if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -486,7 +486,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v) : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -514,12 +514,12 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v) */ static __inline__ long atomic64_add_return(long i, atomic64_t * v) { - unsigned long result; + long result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -533,7 +533,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -566,12 +566,12 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) static __inline__ long atomic64_sub_return(long i, atomic64_t * v) { - unsigned long result; + long result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -585,7 +585,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -626,12 +626,12 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) */ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) { - unsigned long result; + long result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -649,7 +649,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h index b5cf645..3cb50d1 100644 --- a/arch/mips/include/asm/mach-rc32434/gpio.h +++ b/arch/mips/include/asm/mach-rc32434/gpio.h @@ -80,11 +80,8 @@ struct rb532_gpio_reg { /* Compact Flash GPIO pin */ #define CF_GPIO_NUM 13 -extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val); -extern unsigned get_434_reg(unsigned reg_offs); -extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask); -extern unsigned char get_latch_u5(void); extern void rb532_gpio_set_ilevel(int bit, unsigned gpio); extern void rb532_gpio_set_istat(int bit, unsigned gpio); +extern void rb532_gpio_set_func(unsigned gpio); #endif /* _RC32434_GPIO_H_ */ diff --git a/arch/mips/include/asm/mach-rc32434/irq.h b/arch/mips/include/asm/mach-rc32434/irq.h index 56738d8..023a5b1 100644 --- a/arch/mips/include/asm/mach-rc32434/irq.h +++ b/arch/mips/include/asm/mach-rc32434/irq.h @@ -30,4 +30,7 @@ #define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9) #define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10) +#define GPIO_MAPPED_IRQ_BASE GROUP4_IRQ_BASE +#define GPIO_MAPPED_IRQ_GROUP 4 + #endif /* __ASM_RC32434_IRQ_H */ diff --git a/arch/mips/include/asm/mach-rc32434/rb.h b/arch/mips/include/asm/mach-rc32434/rb.h index f25a849..6dc5f8d 100644 --- a/arch/mips/include/asm/mach-rc32434/rb.h +++ b/arch/mips/include/asm/mach-rc32434/rb.h @@ -83,4 +83,7 @@ struct mpmc_device { void __iomem *base; }; +extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask); +extern unsigned char get_latch_u5(void); + #endif /* __ASM_RC32434_RB_H */ diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index 1f30d16..ce47118 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -105,7 +105,7 @@ struct pt_watch_regs { enum pt_watch_style style; union { struct mips32_watch_regs mips32; - struct mips32_watch_regs mips64; + struct mips64_watch_regs mips64; }; }; diff --git a/arch/mips/include/asm/termios.h b/arch/mips/include/asm/termios.h index a275661..8f77f77 100644 --- a/arch/mips/include/asm/termios.h +++ b/arch/mips/include/asm/termios.h @@ -9,6 +9,7 @@ #ifndef _ASM_TERMIOS_H #define _ASM_TERMIOS_H +#include <linux/errno.h> #include <asm/termbits.h> #include <asm/ioctls.h> @@ -94,38 +95,81 @@ struct termio { /* * Translate a "termio" structure into a "termios". Ugh. */ -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - unsigned short tmp; \ - get_user(tmp, &(termio)->c_iflag); \ - (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ - get_user(tmp, &(termio)->c_oflag); \ - (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ - get_user(tmp, &(termio)->c_cflag); \ - (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ - get_user(tmp, &(termio)->c_lflag); \ - (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ - get_user((termios)->c_line, &(termio)->c_line); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) +static inline int user_termio_to_kernel_termios(struct ktermios *termios, + struct termio __user *termio) +{ + unsigned short iflag, oflag, cflag, lflag; + unsigned int err; + + if (!access_ok(VERIFY_READ, termio, sizeof(struct termio))) + return -EFAULT; + + err = __get_user(iflag, &termio->c_iflag); + termios->c_iflag = (termios->c_iflag & 0xffff0000) | iflag; + err |=__get_user(oflag, &termio->c_oflag); + termios->c_oflag = (termios->c_oflag & 0xffff0000) | oflag; + err |=__get_user(cflag, &termio->c_cflag); + termios->c_cflag = (termios->c_cflag & 0xffff0000) | cflag; + err |=__get_user(lflag, &termio->c_lflag); + termios->c_lflag = (termios->c_lflag & 0xffff0000) | lflag; + err |=__get_user(termios->c_line, &termio->c_line); + if (err) + return -EFAULT; + + if (__copy_from_user(termios->c_cc, termio->c_cc, NCC)) + return -EFAULT; + + return 0; +} /* * Translate a "termios" structure into a "termio". Ugh. */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) +static inline int kernel_termios_to_user_termio(struct termio __user *termio, + struct ktermios *termios) +{ + int err; + + if (!access_ok(VERIFY_WRITE, termio, sizeof(struct termio))) + return -EFAULT; + + err = __put_user(termios->c_iflag, &termio->c_iflag); + err |= __put_user(termios->c_oflag, &termio->c_oflag); + err |= __put_user(termios->c_cflag, &termio->c_cflag); + err |= __put_user(termios->c_lflag, &termio->c_lflag); + err |= __put_user(termios->c_line, &termio->c_line); + if (err) + return -EFAULT; + + if (__copy_to_user(termio->c_cc, termios->c_cc, NCC)) + return -EFAULT; + + return 0; +} + +static inline int user_termios_to_kernel_termios(struct ktermios __user *k, + struct termios2 *u) +{ + return copy_from_user(k, u, sizeof(struct termios2)) ? -EFAULT : 0; +} + +static inline int kernel_termios_to_user_termios(struct termios2 __user *u, + struct ktermios *k) +{ + return copy_to_user(u, k, sizeof(struct termios2)) ? -EFAULT : 0; +} + +static inline int user_termios_to_kernel_termios_1(struct ktermios *k, + struct termios __user *u) +{ + return copy_from_user(k, u, sizeof(struct termios)) ? -EFAULT : 0; +} + +static inline int kernel_termios_to_user_termios_1(struct termios __user *u, + struct ktermios *k) +{ + return copy_to_user(u, k, sizeof(struct termios)) ? -EFAULT : 0; +} #endif /* defined(__KERNEL__) */ diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h index 88badb4..964ef7e 100644 --- a/arch/mips/include/asm/txx9/tx4939.h +++ b/arch/mips/include/asm/txx9/tx4939.h @@ -541,5 +541,6 @@ void tx4939_irq_init(void); int tx4939_irq(void); void tx4939_mtd_init(int ch); void tx4939_ata_init(void); +void tx4939_rtc_init(void); #endif /* __ASM_TXX9_TX4939_H */ diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index fb6f731..8882e57 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -458,7 +458,11 @@ NESTED(nmi_handler, PT_SIZE, sp) BUILD_HANDLER fpe fpe fpe silent /* #15 */ BUILD_HANDLER mdmx mdmx sti silent /* #22 */ #ifdef CONFIG_HARDWARE_WATCHPOINTS - BUILD_HANDLER watch watch sti silent /* #23 */ + /* + * For watch, interrupts will be enabled after the watch + * registers are read. + */ + BUILD_HANDLER watch watch cli silent /* #23 */ #else BUILD_HANDLER watch watch sti verbose /* #23 */ #endif diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c index 5e77a3a..4246131 100644 --- a/arch/mips/kernel/mips-mt-fpaff.c +++ b/arch/mips/kernel/mips-mt-fpaff.c @@ -79,7 +79,8 @@ asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len, euid = current_euid(); retval = -EPERM; - if (euid != p->euid && euid != p->uid && !capable(CAP_SYS_NICE)) { + if (euid != p->cred->euid && euid != p->cred->uid && + !capable(CAP_SYS_NICE)) { read_unlock(&tasklist_lock); goto out_unlock; } diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index f6083c6..b2d7041 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -944,6 +944,9 @@ asmlinkage void do_mdmx(struct pt_regs *regs) force_sig(SIGILL, current); } +/* + * Called with interrupts disabled. + */ asmlinkage void do_watch(struct pt_regs *regs) { u32 cause; @@ -963,9 +966,12 @@ asmlinkage void do_watch(struct pt_regs *regs) */ if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) { mips_read_watch_registers(); + local_irq_enable(); force_sig(SIGTRAP, current); - } else + } else { mips_clear_watch_registers(); + local_irq_enable(); + } } asmlinkage void do_mcheck(struct pt_regs *regs) @@ -1582,7 +1588,11 @@ void __init set_handler(unsigned long offset, void *addr, unsigned long size) static char panic_null_cerr[] __cpuinitdata = "Trying to set NULL cache error exception handler"; -/* Install uncached CPU exception handler */ +/* + * Install uncached CPU exception handler. + * This is suitable only for the cache error exception which is the only + * exception handler that is being run uncached. + */ void __cpuinit set_uncached_handler(unsigned long offset, void *addr, unsigned long size) { @@ -1593,7 +1603,7 @@ void __cpuinit set_uncached_handler(unsigned long offset, void *addr, unsigned long uncached_ebase = TO_UNCAC(ebase); #endif if (cpu_has_mips_r2) - ebase += (read_c0_ebase() & 0x3ffff000); + uncached_ebase += (read_c0_ebase() & 0x3ffff000); if (!addr) panic(panic_null_cerr); diff --git a/arch/mips/lib/memcpy-inatomic.S b/arch/mips/lib/memcpy-inatomic.S index 736d0fb..68853a0 100644 --- a/arch/mips/lib/memcpy-inatomic.S +++ b/arch/mips/lib/memcpy-inatomic.S @@ -21,7 +21,7 @@ * end of memory on some systems. It's also a seriously bad idea on non * dma-coherent systems. */ -#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27) +#ifdef CONFIG_DMA_NONCOHERENT #undef CONFIG_CPU_HAS_PREFETCH #endif #ifdef CONFIG_MIPS_MALTA diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S index c06cccf..56a1f85 100644 --- a/arch/mips/lib/memcpy.S +++ b/arch/mips/lib/memcpy.S @@ -21,7 +21,7 @@ * end of memory on some systems. It's also a seriously bad idea on non * dma-coherent systems. */ -#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27) +#ifdef CONFIG_DMA_NONCOHERENT #undef CONFIG_CPU_HAS_PREFETCH #endif #ifdef CONFIG_MIPS_MALTA diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 6e99665..c43f4b2 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -618,15 +618,35 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) if (cpu_has_inclusive_pcaches) { if (size >= scache_size) r4k_blast_scache(); - else + else { + unsigned long lsize = cpu_scache_line_size(); + unsigned long almask = ~(lsize - 1); + + /* + * There is no clearly documented alignment requirement + * for the cache instruction on MIPS processors and + * some processors, among them the RM5200 and RM7000 + * QED processors will throw an address error for cache + * hit ops with insufficient alignment. Solved by + * aligning the address to cache line size. + */ + cache_op(Hit_Writeback_Inv_SD, addr & almask); + cache_op(Hit_Writeback_Inv_SD, + (addr + size - 1) & almask); blast_inv_scache_range(addr, addr + size); + } return; } if (cpu_has_safe_index_cacheops && size >= dcache_size) { r4k_blast_dcache(); } else { + unsigned long lsize = cpu_dcache_line_size(); + unsigned long almask = ~(lsize - 1); + R4600_HIT_CACHEOP_WAR_IMPL; + cache_op(Hit_Writeback_Inv_D, addr & almask); + cache_op(Hit_Writeback_Inv_D, (addr + size - 1) & almask); blast_inv_dcache_range(addr, addr + size); } diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index fa636fc..55767ad 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -97,7 +97,6 @@ good_area: goto bad_area; } -survive: /* * If for any reason at all we couldn't handle the fault, * make sure we exit gracefully rather than endlessly redo @@ -167,21 +166,13 @@ no_context: field, regs->regs[31]); die("Oops", regs); -/* - * We ran out of memory, or some other thing happened to us that made - * us unable to handle the page fault gracefully. - */ out_of_memory: - up_read(&mm->mmap_sem); - if (is_global_init(tsk)) { - yield(); - down_read(&mm->mmap_sem); - goto survive; - } - printk("VM: killing process %s\n", tsk->comm); - if (user_mode(regs)) - do_group_exit(SIGKILL); - goto no_context; + /* + * We ran out of memory, call the OOM killer, and return the userspace + * (which will retry the fault, or kill us if we got oom-killed). + */ + pagefault_out_of_memory(); + return; do_sigbus: up_read(&mm->mmap_sem); diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c index 1c2821e..71f7d27 100644 --- a/arch/mips/pci/pci-rc32434.c +++ b/arch/mips/pci/pci-rc32434.c @@ -205,6 +205,8 @@ static int __init rc32434_pcibridge_init(void) static int __init rc32434_pci_init(void) { + void __iomem *io_map_base; + pr_info("PCI: Initializing PCI\n"); ioport_resource.start = rc32434_res_pci_io1.start; @@ -212,6 +214,15 @@ static int __init rc32434_pci_init(void) rc32434_pcibridge_init(); + io_map_base = ioremap(rc32434_res_pci_io1.start, + rc32434_res_pci_io1.end - rc32434_res_pci_io1.start + 1); + + if (!io_map_base) + return -ENOMEM; + + rc32434_controller.io_map_base = + (unsigned long)io_map_base - rc32434_res_pci_io1.start; + register_pci_controller(&rc32434_controller); rc32434_sync(); diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index c1c2918..4a5f05b 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -24,6 +24,7 @@ #include <linux/mtd/partitions.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/serial_8250.h> #include <asm/bootinfo.h> @@ -39,6 +40,29 @@ #define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET) #define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET) +extern unsigned int idt_cpu_freq; + +static struct mpmc_device dev3; + +void set_latch_u5(unsigned char or_mask, unsigned char nand_mask) +{ + unsigned long flags; + + spin_lock_irqsave(&dev3.lock, flags); + + dev3.state = (dev3.state | or_mask) & ~nand_mask; + writeb(dev3.state, dev3.base); + + spin_unlock_irqrestore(&dev3.lock, flags); +} +EXPORT_SYMBOL(set_latch_u5); + +unsigned char get_latch_u5(void) +{ + return dev3.state; +} +EXPORT_SYMBOL(get_latch_u5); + static struct resource korina_dev0_res[] = { { .name = "korina_regs", @@ -86,7 +110,7 @@ static struct korina_device korina_dev0_data = { static struct platform_device korina_dev0 = { .id = -1, .name = "korina", - .dev.platform_data = &korina_dev0_data, + .dev.driver_data = &korina_dev0_data, .resource = korina_dev0_res, .num_resources = ARRAY_SIZE(korina_dev0_res), }; @@ -214,12 +238,32 @@ static struct platform_device rb532_wdt = { .num_resources = ARRAY_SIZE(rb532_wdt_res), }; +static struct plat_serial8250_port rb532_uart_res[] = { + { + .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE), + .irq = UART0_IRQ, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF, + }, + { + .flags = 0, + } +}; + +static struct platform_device rb532_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = &rb532_uart_res, +}; + static struct platform_device *rb532_devs[] = { &korina_dev0, &nand_slot0, &cf_slot0, &rb532_led, &rb532_button, + &rb532_uart, &rb532_wdt }; @@ -291,9 +335,20 @@ static int __init plat_setup_devices(void) nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE); nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000; + /* Read and map device controller 3 */ + dev3.base = ioremap_nocache(readl(IDT434_REG_BASE + DEV3BASE), 1); + + if (!dev3.base) { + printk(KERN_ERR "rb532: cannot remap device controller 3\n"); + return -ENXIO; + } + /* Initialise the NAND device */ rb532_nand_setup(); + /* set the uart clock to the current cpu frequency */ + rb532_uart_res[0].uartclk = idt_cpu_freq; + return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs)); } diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 0e84c8a..37de05d 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -41,8 +41,6 @@ struct rb532_gpio_chip { void __iomem *regbase; }; -struct mpmc_device dev3; - static struct resource rb532_gpio_reg0_res[] = { { .name = "gpio_reg0", @@ -52,61 +50,6 @@ static struct resource rb532_gpio_reg0_res[] = { } }; -static struct resource rb532_dev3_ctl_res[] = { - { - .name = "dev3_ctl", - .start = REGBASE + DEV3BASE, - .end = REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1, - .flags = IORESOURCE_MEM, - } -}; - -void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val) -{ - unsigned long flags; - unsigned data; - unsigned i = 0; - - spin_lock_irqsave(&dev3.lock, flags); - - data = readl(IDT434_REG_BASE + reg_offs); - for (i = 0; i != len; ++i) { - if (val & (1 << i)) - data |= (1 << (i + bit)); - else - data &= ~(1 << (i + bit)); - } - writel(data, (IDT434_REG_BASE + reg_offs)); - - spin_unlock_irqrestore(&dev3.lock, flags); -} -EXPORT_SYMBOL(set_434_reg); - -unsigned get_434_reg(unsigned reg_offs) -{ - return readl(IDT434_REG_BASE + reg_offs); -} -EXPORT_SYMBOL(get_434_reg); - -void set_latch_u5(unsigned char or_mask, unsigned char nand_mask) -{ - unsigned long flags; - - spin_lock_irqsave(&dev3.lock, flags); - - dev3.state = (dev3.state | or_mask) & ~nand_mask; - writel(dev3.state, &dev3.base); - - spin_unlock_irqrestore(&dev3.lock, flags); -} -EXPORT_SYMBOL(set_latch_u5); - -unsigned char get_latch_u5(void) -{ - return dev3.state; -} -EXPORT_SYMBOL(get_latch_u5); - /* rb532_set_bit - sanely set a bit * * bitval: new value for the bit @@ -119,13 +62,11 @@ static inline void rb532_set_bit(unsigned bitval, unsigned long flags; u32 val; - bitval = !!bitval; /* map parameter to {0,1} */ - local_irq_save(flags); val = readl(ioaddr); - val &= ~( ~bitval << offset ); /* unset bit if bitval == 0 */ - val |= ( bitval << offset ); /* set bit if bitval == 1 */ + val &= ~(!bitval << offset); /* unset bit if bitval == 0 */ + val |= (!!bitval << offset); /* set bit if bitval == 1 */ writel(val, ioaddr); local_irq_restore(flags); @@ -171,8 +112,8 @@ static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset) gpch = container_of(chip, struct rb532_gpio_chip, chip); - if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC)) - return 1; /* alternate function, GPIOCFG is ignored */ + /* disable alternate function in case it's set */ + rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC); rb532_set_bit(0, offset, gpch->regbase + GPIOCFG); return 0; @@ -188,8 +129,8 @@ static int rb532_gpio_direction_output(struct gpio_chip *chip, gpch = container_of(chip, struct rb532_gpio_chip, chip); - if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC)) - return 1; /* alternate function, GPIOCFG is ignored */ + /* disable alternate function in case it's set */ + rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC); /* set the initial output value */ rb532_set_bit(value, offset, gpch->regbase + GPIOD); @@ -233,10 +174,11 @@ EXPORT_SYMBOL(rb532_gpio_set_istat); /* * Configure GPIO alternate function */ -static void rb532_gpio_set_func(int bit, unsigned gpio) +void rb532_gpio_set_func(unsigned gpio) { - rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOFUNC); + rb532_set_bit(1, gpio, rb532_gpio_chip->regbase + GPIOFUNC); } +EXPORT_SYMBOL(rb532_gpio_set_func); int __init rb532_gpio_init(void) { @@ -253,20 +195,6 @@ int __init rb532_gpio_init(void) /* Register our GPIO chip */ gpiochip_add(&rb532_gpio_chip->chip); - r = rb532_dev3_ctl_res; - dev3.base = ioremap_nocache(r->start, r->end - r->start); - - if (!dev3.base) { - printk(KERN_ERR "rb532: cannot remap device controller 3\n"); - return -ENXIO; - } - - /* configure CF_GPIO_NUM as CFRDY IRQ source */ - rb532_gpio_set_func(0, CF_GPIO_NUM); - rb532_gpio_direction_input(&rb532_gpio_chip->chip, CF_GPIO_NUM); - rb532_gpio_set_ilevel(1, CF_GPIO_NUM); - rb532_gpio_set_istat(0, CF_GPIO_NUM); - return 0; } arch_initcall(rb532_gpio_init); diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c index 549b46d..53eeb5e 100644 --- a/arch/mips/rb532/irq.c +++ b/arch/mips/rb532/irq.c @@ -46,6 +46,7 @@ #include <asm/system.h> #include <asm/mach-rc32434/irq.h> +#include <asm/mach-rc32434/gpio.h> struct intr_group { u32 mask; /* mask of valid bits in pending/mask registers */ @@ -150,6 +151,9 @@ static void rb532_disable_irq(unsigned int irq_nr) mask |= intr_bit; WRITE_MASK(addr, mask); + if (group == GPIO_MAPPED_IRQ_GROUP) + rb532_gpio_set_istat(0, irq_nr - GPIO_MAPPED_IRQ_BASE); + /* * if there are no more interrupts enabled in this * group, disable corresponding IP @@ -165,12 +169,35 @@ static void rb532_mask_and_ack_irq(unsigned int irq_nr) ack_local_irq(group_to_ip(irq_to_group(irq_nr))); } +static int rb532_set_type(unsigned int irq_nr, unsigned type) +{ + int gpio = irq_nr - GPIO_MAPPED_IRQ_BASE; + int group = irq_to_group(irq_nr); + + if (group != GPIO_MAPPED_IRQ_GROUP) + return (type == IRQ_TYPE_LEVEL_HIGH) ? 0 : -EINVAL; + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + rb532_gpio_set_ilevel(1, gpio); + break; + case IRQ_TYPE_LEVEL_LOW: + rb532_gpio_set_ilevel(0, gpio); + break; + default: + return -EINVAL; + } + + return 0; +} + static struct irq_chip rc32434_irq_type = { .name = "RB532", .ack = rb532_disable_irq, .mask = rb532_disable_irq, .mask_ack = rb532_mask_and_ack_irq, .unmask = rb532_enable_irq, + .set_type = rb532_set_type, }; void __init arch_init_irq(void) diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c index 3e0d7ec..00ed19f 100644 --- a/arch/mips/rb532/serial.c +++ b/arch/mips/rb532/serial.c @@ -36,7 +36,7 @@ extern unsigned int idt_cpu_freq; static struct uart_port rb532_uart = { - .type = PORT_16550A, + .flags = UPF_BOOT_AUTOCONF, .line = 0, .irq = UART0_IRQ, .iotype = UPIO_MEM, diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index 6c0049a..5544096 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -435,6 +435,28 @@ void __init tx4939_ata_init(void) platform_device_register(&ata1_dev); } +void __init tx4939_rtc_init(void) +{ + static struct resource res[] = { + { + .start = TX4939_RTC_REG & 0xfffffffffULL, + .end = (TX4939_RTC_REG & 0xfffffffffULL) + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = TXX9_IRQ_BASE + TX4939_IR_RTC, + .flags = IORESOURCE_IRQ, + }, + }; + static struct platform_device rtc_dev = { + .name = "tx4939rtc", + .id = -1, + .num_resources = ARRAY_SIZE(res), + .resource = res, + }; + + platform_device_register(&rtc_dev); +} + static void __init tx4939_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index 98fbd93..656603b 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -336,6 +336,7 @@ static void __init rbtx4939_device_init(void) rbtx4939_led_setup(); tx4939_wdt_init(); tx4939_ata_init(); + tx4939_rtc_init(); } static void __init rbtx4939_setup(void) diff --git a/arch/parisc/include/asm/dma-mapping.h b/arch/parisc/include/asm/dma-mapping.h index 53af696..da69433 100644 --- a/arch/parisc/include/asm/dma-mapping.h +++ b/arch/parisc/include/asm/dma-mapping.h @@ -5,7 +5,7 @@ #include <asm/cacheflush.h> #include <asm/scatterlist.h> -/* See Documentation/DMA-mapping.txt */ +/* See Documentation/PCI/PCI-DMA-mapping.txt */ struct hppa_dma_ops { int (*dma_supported)(struct device *dev, u64 mask); void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag); diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index ccd61b9..df47895 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -2,7 +2,7 @@ ** PARISC 1.1 Dynamic DMA mapping support. ** This implementation is for PA-RISC platforms that do not support ** I/O TLBs (aka DMA address translation hardware). -** See Documentation/DMA-mapping.txt for interface definitions. +** See Documentation/PCI/PCI-DMA-mapping.txt for interface definitions. ** ** (c) Copyright 1999,2000 Hewlett-Packard Company ** (c) Copyright 2000 Grant Grundler diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 99c495a..1239c61 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:12:40 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:41:58 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,14 +71,23 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -110,7 +119,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -121,13 +129,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,7 +149,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -182,9 +187,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y -# CONFIG_PPC_BESTCOMM_ATA is not set CONFIG_PPC_BESTCOMM_FEC=y -# CONFIG_PPC_BESTCOMM_GEN_BD is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -211,6 +215,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -222,12 +227,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -268,6 +275,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -336,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -427,6 +437,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -514,6 +530,9 @@ CONFIG_LXT_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -539,6 +558,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -588,8 +611,10 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600 CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -629,8 +654,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -675,10 +698,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -736,6 +761,7 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -760,18 +786,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -817,6 +842,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -826,7 +855,6 @@ CONFIG_USB_STORAGE=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -847,6 +875,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -883,10 +912,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -906,6 +932,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1002,6 +1029,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1053,6 +1081,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1061,6 +1090,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1069,11 +1100,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1100,11 +1133,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index 9796220..b7b8805 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:10:16 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:41:14 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -72,14 +72,23 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -112,7 +121,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,7 +131,6 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +138,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,7 +156,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y CONFIG_FREEZER=y # @@ -192,7 +196,7 @@ CONFIG_PPC_LITE5200=y CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -CONFIG_PPC_BESTCOMM_GEN_BD=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -220,6 +224,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -231,12 +236,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -264,6 +271,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -286,6 +294,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -342,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -354,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -396,13 +407,19 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -445,6 +462,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -461,6 +479,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -580,6 +600,9 @@ CONFIG_LXT_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -626,6 +649,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -648,6 +672,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -695,8 +723,10 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -762,8 +792,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -796,10 +824,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -846,9 +876,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -860,7 +894,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -881,6 +914,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -914,10 +948,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -926,6 +957,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -967,6 +999,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1016,6 +1049,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1024,6 +1058,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1032,11 +1068,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1063,11 +1101,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index d081e00..fb10f22 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:11:02 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:42:29 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,14 +71,23 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -110,7 +119,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -121,13 +129,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,7 +149,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -182,9 +187,9 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y -# CONFIG_PPC_BESTCOMM_ATA is not set +CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -# CONFIG_PPC_BESTCOMM_GEN_BD is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -211,6 +216,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -222,12 +228,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -268,6 +276,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -336,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -427,6 +438,12 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -447,10 +464,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -492,6 +515,7 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -525,6 +549,9 @@ CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y @@ -548,6 +575,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -590,8 +621,10 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -629,8 +662,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -659,6 +690,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -678,6 +710,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -721,10 +754,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -835,7 +870,6 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -856,6 +890,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -892,10 +927,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -915,6 +947,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1011,6 +1044,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1062,6 +1096,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1070,6 +1105,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1078,11 +1115,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1109,11 +1148,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index b21b8e8..00944c0 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:13:16 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:41:33 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -72,15 +72,24 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -112,7 +121,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -124,7 +132,6 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -132,11 +139,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,7 +157,6 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -191,9 +195,9 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y -CONFIG_PPC_BESTCOMM_ATA=y +CONFIG_PPC_BESTCOMM_ATA=m CONFIG_PPC_BESTCOMM_FEC=y -CONFIG_PPC_BESTCOMM_GEN_BD=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -212,7 +216,6 @@ CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set @@ -222,6 +225,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -233,12 +237,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -261,6 +267,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -283,6 +290,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -333,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -345,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -365,6 +375,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -413,9 +424,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PHYSMAP_OF is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -439,6 +448,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -587,6 +602,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -621,6 +639,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -675,7 +697,9 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600 # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -740,8 +764,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -774,10 +796,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -837,6 +861,7 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m @@ -864,18 +889,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -921,6 +945,10 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -983,7 +1011,6 @@ CONFIG_RTC_DRV_PCF8563=m # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1004,6 +1031,7 @@ CONFIG_FS_MBCACHE=m CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -1039,10 +1067,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1062,6 +1087,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1141,6 +1167,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1173,6 +1200,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1180,6 +1209,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 7995457..65237ad 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:09:30 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:42:58 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,14 +71,23 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -110,7 +119,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -121,7 +129,6 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -129,11 +136,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -149,7 +154,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -188,9 +192,9 @@ CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y -# CONFIG_PPC_BESTCOMM_ATA is not set +CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -# CONFIG_PPC_BESTCOMM_GEN_BD is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -217,6 +221,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -228,12 +233,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -274,6 +281,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -330,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -342,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -364,6 +374,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -433,6 +444,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -496,6 +513,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -530,6 +548,9 @@ CONFIG_LXT_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -555,6 +576,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -604,8 +629,10 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -645,8 +672,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -675,6 +700,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -694,6 +720,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -742,10 +769,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -803,6 +832,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -827,18 +857,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -884,6 +913,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -947,7 +980,6 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -968,6 +1000,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1004,10 +1037,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1027,6 +1057,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1123,6 +1154,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1174,6 +1206,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1182,6 +1215,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1190,11 +1225,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1221,11 +1258,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 5ff3de2..81afc8b 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:09:07 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:40:44 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -72,10 +72,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -108,7 +117,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -119,7 +127,6 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -127,11 +134,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,7 +152,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y CONFIG_FREEZER=y # @@ -192,7 +196,7 @@ CONFIG_RTAS_PROC=y CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -CONFIG_PPC_BESTCOMM_GEN_BD=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -220,6 +224,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -231,12 +236,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -264,6 +271,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -286,6 +294,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -342,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -354,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -376,6 +387,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -447,6 +459,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -474,13 +492,19 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -539,6 +563,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -659,6 +685,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -693,6 +722,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -774,9 +807,11 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_RTAS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -844,8 +879,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -874,6 +907,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -894,6 +928,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -953,10 +988,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -1051,7 +1088,7 @@ CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y # # Display device support @@ -1093,21 +1130,22 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y # CONFIG_HID_APPLE is not set CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y # CONFIG_HID_CHICONY is not set CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y # CONFIG_HID_GYRATION is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y @@ -1137,6 +1175,7 @@ CONFIG_USB_MON=y # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1164,18 +1203,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1222,6 +1260,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1243,7 +1285,6 @@ CONFIG_NEW_LEDS=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1264,6 +1305,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1300,10 +1342,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1323,6 +1362,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1403,6 +1443,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1454,6 +1495,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1462,6 +1504,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1470,11 +1514,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1501,11 +1547,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index da5a385..19b12d2 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -16,8 +16,6 @@ * 2 of the License, or (at your option) any later version. */ -#define DEBUG - #include <linux/kernel.h> #include <linux/pci.h> #include <linux/string.h> @@ -258,7 +256,8 @@ int pci_read_irq_line(struct pci_dev *pci_dev) } else { pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n", oirq.size, oirq.specifier[0], oirq.specifier[1], - oirq.controller->full_name); + oirq.controller ? oirq.controller->full_name : + "<default>"); virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c index c3f2c21..87ff522 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -20,14 +20,6 @@ /* ======================================================================== */ -/* PCI windows config */ -/* ======================================================================== */ - -#define MPC52xx_PCI_TARGET_IO 0xf0000000 -#define MPC52xx_PCI_TARGET_MEM 0x00000000 - - -/* ======================================================================== */ /* Structures mapping & Defines for PCI Unit */ /* ======================================================================== */ @@ -244,7 +236,7 @@ static struct pci_ops mpc52xx_pci_ops = { static void __init mpc52xx_pci_setup(struct pci_controller *hose, - struct mpc52xx_pci __iomem *pci_regs) + struct mpc52xx_pci __iomem *pci_regs, phys_addr_t pci_phys) { struct resource *res; u32 tmp; @@ -314,10 +306,14 @@ mpc52xx_pci_setup(struct pci_controller *hose, /* Set all the IWCR fields at once; they're in the same reg */ out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(iwcr0, iwcr1, iwcr2)); - out_be32(&pci_regs->tbatr0, - MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO ); - out_be32(&pci_regs->tbatr1, - MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM ); + /* Map IMMR onto PCI bus */ + pci_phys &= 0xfffc0000; /* bar0 has only 14 significant bits */ + out_be32(&pci_regs->tbatr0, MPC52xx_PCI_TBATR_ENABLE | pci_phys); + out_be32(&pci_regs->bar0, PCI_BASE_ADDRESS_MEM_PREFETCH | pci_phys); + + /* Map memory onto PCI bus */ + out_be32(&pci_regs->tbatr1, MPC52xx_PCI_TBATR_ENABLE); + out_be32(&pci_regs->bar1, PCI_BASE_ADDRESS_MEM_PREFETCH); out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD | MPC52xx_PCI_TCR_WCT8); @@ -414,7 +410,7 @@ mpc52xx_add_bridge(struct device_node *node) /* Finish setting up PCI using values obtained by * pci_proces_bridge_OF_ranges */ - mpc52xx_pci_setup(hose, pci_regs); + mpc52xx_pci_setup(hose, pci_regs, rsrc.start); return 0; } diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c6e567b..80291f7 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1783,6 +1783,17 @@ config DMAR and include PCI device scope covered by these DMA remapping devices. +config DMAR_DEFAULT_ON + def_bool n + prompt "Enable DMA Remapping Devices by default" + depends on DMAR + help + Selecting this option will enable a DMAR device at boot time if + one is found. If this option is not selected, DMAR support can + be enabled by passing intel_iommu=on to the kernel. It is + recommended you say N here while the DMAR code remains + experimental. + config DMAR_GFX_WA def_bool y prompt "Support for Graphics workaround" diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 8eb50ba..085fef4 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -167,9 +167,9 @@ config MK7 config MK8 bool "Opteron/Athlon64/Hammer/K8" help - Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables - use of some extended instructions, and passes appropriate optimization - flags to GCC. + Select this for an AMD Opteron or Athlon64 Hammer-family processor. + Enables use of some extended instructions, and passes appropriate + optimization flags to GCC. config MCRUSOE bool "Crusoe" @@ -256,9 +256,11 @@ config MPSC config MCORE2 bool "Core 2/newer Xeon" help - Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx) - CPUs. You can distinguish newer from older Xeons by the CPU family - in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo) + + Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and + 53xx) CPUs. You can distinguish newer from older Xeons by the CPU + family in /proc/cpuinfo. Newer ones have 6 and older ones 15 + (not a typo) config GENERIC_CPU bool "Generic-x86-64" @@ -318,14 +320,14 @@ config X86_PPRO_FENCE bool "PentiumPro memory ordering errata workaround" depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1 help - Old PentiumPro multiprocessor systems had errata that could cause memory - operations to violate the x86 ordering standard in rare cases. Enabling this - option will attempt to work around some (but not all) occurances of - this problem, at the cost of much heavier spinlock and memory barrier - operations. + Old PentiumPro multiprocessor systems had errata that could cause + memory operations to violate the x86 ordering standard in rare cases. + Enabling this option will attempt to work around some (but not all) + occurances of this problem, at the cost of much heavier spinlock and + memory barrier operations. - If unsure, say n here. Even distro kernels should think twice before enabling - this: there are few systems, and an unlikely bug. + If unsure, say n here. Even distro kernels should think twice before + enabling this: there are few systems, and an unlikely bug. config X86_F00F_BUG def_bool y diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index 4035357..132a134 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -2,8 +2,8 @@ #define _ASM_X86_DMA_MAPPING_H /* - * IOMMU interface. See Documentation/DMA-mapping.txt and DMA-API.txt for - * documentation. + * IOMMU interface. See Documentation/PCI/PCI-DMA-mapping.txt and + * Documentation/DMA-API.txt for documentation. */ #include <linux/scatterlist.h> diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index 3d8cedd..00d41ce 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -49,6 +49,7 @@ #define E820_RESERVED_KERN 128 #ifndef __ASSEMBLY__ +#include <linux/types.h> struct e820entry { __u64 addr; /* start of memory segment */ __u64 size; /* size of memory segment */ diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h index b95162a..d2e3bf3 100644 --- a/arch/x86/include/asm/kvm.h +++ b/arch/x86/include/asm/kvm.h @@ -6,7 +6,7 @@ * */ -#include <asm/types.h> +#include <linux/types.h> #include <linux/ioctl.h> /* Architectural interrupt line count. */ diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 1d6e17c..32c6e17 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -3,8 +3,8 @@ #ifdef __x86_64__ +#include <linux/types.h> #include <asm/ioctls.h> -#include <asm/types.h> /* * Machine Check support for x86 @@ -115,8 +115,6 @@ extern int mce_notify_user(void); #endif /* !CONFIG_X86_32 */ - - #ifdef CONFIG_X86_MCE extern void mcheck_init(struct cpuinfo_x86 *c); #else @@ -126,5 +124,4 @@ extern void stop_mce(void); extern void restart_mce(void); #endif /* __KERNEL__ */ - #endif /* _ASM_X86_MCE_H */ diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h index 14080d2..a51ada8 100644 --- a/arch/x86/include/asm/mtrr.h +++ b/arch/x86/include/asm/mtrr.h @@ -23,6 +23,7 @@ #ifndef _ASM_X86_MTRR_H #define _ASM_X86_MTRR_H +#include <linux/types.h> #include <linux/ioctl.h> #include <linux/errno.h> diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h index 6ceaef0..6f7c102 100644 --- a/arch/x86/include/asm/pgtable.h +++ b/arch/x86/include/asm/pgtable.h @@ -316,16 +316,30 @@ static inline pte_t pte_mkspecial(pte_t pte) extern pteval_t __supported_pte_mask; +/* + * Mask out unsupported bits in a present pgprot. Non-present pgprots + * can use those bits for other purposes, so leave them be. + */ +static inline pgprotval_t massage_pgprot(pgprot_t pgprot) +{ + pgprotval_t protval = pgprot_val(pgprot); + + if (protval & _PAGE_PRESENT) + protval &= __supported_pte_mask; + + return protval; +} + static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot) { - return __pte((((phys_addr_t)page_nr << PAGE_SHIFT) | - pgprot_val(pgprot)) & __supported_pte_mask); + return __pte(((phys_addr_t)page_nr << PAGE_SHIFT) | + massage_pgprot(pgprot)); } static inline pmd_t pfn_pmd(unsigned long page_nr, pgprot_t pgprot) { - return __pmd((((phys_addr_t)page_nr << PAGE_SHIFT) | - pgprot_val(pgprot)) & __supported_pte_mask); + return __pmd(((phys_addr_t)page_nr << PAGE_SHIFT) | + massage_pgprot(pgprot)); } static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) @@ -337,7 +351,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * the newprot (if present): */ val &= _PAGE_CHG_MASK; - val |= pgprot_val(newprot) & (~_PAGE_CHG_MASK) & __supported_pte_mask; + val |= massage_pgprot(newprot) & ~_PAGE_CHG_MASK; return __pte(val); } @@ -353,7 +367,7 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot) #define pte_pgprot(x) __pgprot(pte_flags(x) & PTE_FLAGS_MASK) -#define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask) +#define canon_pgprot(p) __pgprot(massage_pgprot(p)) static inline int is_new_memtype_allowed(unsigned long flags, unsigned long new_flags) diff --git a/arch/x86/include/asm/ptrace-abi.h b/arch/x86/include/asm/ptrace-abi.h index 25f1bb8..8e0f8d1 100644 --- a/arch/x86/include/asm/ptrace-abi.h +++ b/arch/x86/include/asm/ptrace-abi.h @@ -83,7 +83,7 @@ #ifdef CONFIG_X86_PTRACE_BTS #ifndef __ASSEMBLY__ -#include <asm/types.h> +#include <linux/types.h> /* configuration/status structure used in PTRACE_BTS_CONFIG and PTRACE_BTS_STATUS commands. diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h index 0afcb5e..ec66649 100644 --- a/arch/x86/include/asm/sigcontext.h +++ b/arch/x86/include/asm/sigcontext.h @@ -2,7 +2,7 @@ #define _ASM_X86_SIGCONTEXT_H #include <linux/compiler.h> -#include <asm/types.h> +#include <linux/types.h> #define FP_XSTATE_MAGIC1 0x46505853U #define FP_XSTATE_MAGIC2 0x46505845U diff --git a/arch/x86/include/asm/swab.h b/arch/x86/include/asm/swab.h index 306d417..557cd9f 100644 --- a/arch/x86/include/asm/swab.h +++ b/arch/x86/include/asm/swab.h @@ -1,7 +1,7 @@ #ifndef _ASM_X86_SWAB_H #define _ASM_X86_SWAB_H -#include <asm/types.h> +#include <linux/types.h> #include <linux/compiler.h> static inline __attribute_const__ __u32 __arch_swab32(__u32 val) diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h index 7ef617e..4bd990e 100644 --- a/arch/x86/include/asm/xen/page.h +++ b/arch/x86/include/asm/xen/page.h @@ -137,7 +137,7 @@ static inline pte_t mfn_pte(unsigned long page_nr, pgprot_t pgprot) pte_t pte; pte.pte = ((phys_addr_t)page_nr << PAGE_SHIFT) | - (pgprot_val(pgprot) & __supported_pte_mask); + massage_pgprot(pgprot); return pte; } diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c index 5475e1c..8bd801d 100644 --- a/arch/x86/kernel/apic.c +++ b/arch/x86/kernel/apic.c @@ -1461,7 +1461,7 @@ static int __init detect_init_APIC(void) switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) || - (boot_cpu_data.x86 == 15)) + (boot_cpu_data.x86 >= 15)) break; goto no_apic; case X86_VENDOR_INTEL: diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 58527a9..7293508 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -36,8 +36,11 @@ static struct _cache_table cache_table[] __cpuinitdata = { { 0x06, LVL_1_INST, 8 }, /* 4-way set assoc, 32 byte line size */ { 0x08, LVL_1_INST, 16 }, /* 4-way set assoc, 32 byte line size */ + { 0x09, LVL_1_INST, 32 }, /* 4-way set assoc, 64 byte line size */ { 0x0a, LVL_1_DATA, 8 }, /* 2 way set assoc, 32 byte line size */ { 0x0c, LVL_1_DATA, 16 }, /* 4-way set assoc, 32 byte line size */ + { 0x0d, LVL_1_DATA, 16 }, /* 4-way set assoc, 64 byte line size */ + { 0x21, LVL_2, 256 }, /* 8-way set assoc, 64 byte line size */ { 0x22, LVL_3, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */ { 0x23, LVL_3, 1024 }, /* 8-way set assoc, sectored cache, 64 byte line size */ { 0x25, LVL_3, 2048 }, /* 8-way set assoc, sectored cache, 64 byte line size */ @@ -85,6 +88,18 @@ static struct _cache_table cache_table[] __cpuinitdata = { 0x85, LVL_2, 2048 }, /* 8-way set assoc, 32 byte line size */ { 0x86, LVL_2, 512 }, /* 4-way set assoc, 64 byte line size */ { 0x87, LVL_2, 1024 }, /* 8-way set assoc, 64 byte line size */ + { 0xd0, LVL_3, 512 }, /* 4-way set assoc, 64 byte line size */ + { 0xd1, LVL_3, 1024 }, /* 4-way set assoc, 64 byte line size */ + { 0xd2, LVL_3, 2048 }, /* 4-way set assoc, 64 byte line size */ + { 0xd6, LVL_3, 1024 }, /* 8-way set assoc, 64 byte line size */ + { 0xd7, LVL_3, 2038 }, /* 8-way set assoc, 64 byte line size */ + { 0xd8, LVL_3, 4096 }, /* 12-way set assoc, 64 byte line size */ + { 0xdc, LVL_3, 2048 }, /* 12-way set assoc, 64 byte line size */ + { 0xdd, LVL_3, 4096 }, /* 12-way set assoc, 64 byte line size */ + { 0xde, LVL_3, 8192 }, /* 12-way set assoc, 64 byte line size */ + { 0xe2, LVL_3, 2048 }, /* 16-way set assoc, 64 byte line size */ + { 0xe3, LVL_3, 4096 }, /* 16-way set assoc, 64 byte line size */ + { 0xe4, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size */ { 0x00, 0, 0} }; diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index d259e5d..236a401 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -1594,8 +1594,7 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) /* kvm/qemu doesn't have mtrr set right, don't trim them all */ if (!highest_pfn) { - WARN(!kvm_para_available(), KERN_WARNING - "WARNING: strange, CPU MTRRs all blank?\n"); + printk(KERN_INFO "CPU MTRRs all blank - virtualized system.\n"); return 0; } diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index da91701..169a120 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -15,8 +15,8 @@ * - buffer allocation (memory accounting) * * - * Copyright (C) 2007-2008 Intel Corporation. - * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008 + * Copyright (C) 2007-2009 Intel Corporation. + * Markus Metzger <markus.t.metzger@intel.com>, 2007-2009 */ @@ -890,7 +890,7 @@ int ds_set_pebs_reset(struct pebs_tracer *tracer, u64 value) } static const struct ds_configuration ds_cfg_netburst = { - .name = "netburst", + .name = "Netburst", .ctl[dsf_bts] = (1 << 2) | (1 << 3), .ctl[dsf_bts_kernel] = (1 << 5), .ctl[dsf_bts_user] = (1 << 6), @@ -904,7 +904,7 @@ static const struct ds_configuration ds_cfg_netburst = { #endif }; static const struct ds_configuration ds_cfg_pentium_m = { - .name = "pentium m", + .name = "Pentium M", .ctl[dsf_bts] = (1 << 6) | (1 << 7), .sizeof_field = sizeof(long), @@ -915,8 +915,8 @@ static const struct ds_configuration ds_cfg_pentium_m = { .sizeof_rec[ds_pebs] = sizeof(long) * 18, #endif }; -static const struct ds_configuration ds_cfg_core2 = { - .name = "core 2", +static const struct ds_configuration ds_cfg_core2_atom = { + .name = "Core 2/Atom", .ctl[dsf_bts] = (1 << 6) | (1 << 7), .ctl[dsf_bts_kernel] = (1 << 9), .ctl[dsf_bts_user] = (1 << 10), @@ -949,19 +949,22 @@ void __cpuinit ds_init_intel(struct cpuinfo_x86 *c) switch (c->x86) { case 0x6: switch (c->x86_model) { - case 0 ... 0xC: - /* sorry, don't know about them */ - break; - case 0xD: - case 0xE: /* Pentium M */ + case 0x9: + case 0xd: /* Pentium M */ ds_configure(&ds_cfg_pentium_m); break; - default: /* Core2, Atom, ... */ - ds_configure(&ds_cfg_core2); + case 0xf: + case 0x17: /* Core2 */ + case 0x1c: /* Atom */ + ds_configure(&ds_cfg_core2_atom); + break; + case 0x1a: /* i7 */ + default: + /* sorry, don't know about them */ break; } break; - case 0xF: + case 0xf: switch (c->x86_model) { case 0x0: case 0x1: diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 82801fd..1f7d697 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -347,6 +347,7 @@ ENTRY(save_args) popq_cfi %rax /* move return address... */ mov PER_CPU_VAR(irq_stack_ptr),%rsp EMPTY_FRAME 0 + pushq_cfi %rbp /* backlink for unwinder */ pushq_cfi %rax /* ... to the new stack */ /* * We entered an interrupt context - irqs are off: diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c index 84bccac..9578d33 100644 --- a/arch/x86/kernel/io_apic.c +++ b/arch/x86/kernel/io_apic.c @@ -2524,14 +2524,15 @@ static void irq_complete_move(struct irq_desc **descp) vector = ~get_irq_regs()->orig_ax; me = smp_processor_id(); + + if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) { #ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC *descp = desc = move_irq_desc(desc, me); /* get the new one */ cfg = desc->chip_data; #endif - - if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) send_cleanup_vector(cfg); + } } #else static inline void irq_complete_move(struct irq_desc **descp) {} diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index 00c2bcd..d5768b1 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -5,7 +5,7 @@ * This allows to use PCI devices that only support 32bit addresses on systems * with more than 4GB. * - * See Documentation/DMA-mapping.txt for the interface specification. + * See Documentation/PCI/PCI-DMA-mapping.txt for the interface specification. * * Copyright 2002 Andi Kleen, SuSE Labs. * Subject to the GNU General Public License v2 only. diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index c422eeb..8eb169e 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -41,6 +41,7 @@ #include <linux/uaccess.h> #include <linux/io.h> #include <linux/ftrace.h> +#include <linux/dmi.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -168,14 +169,18 @@ void __show_regs(struct pt_regs *regs, int all) unsigned long d0, d1, d2, d3, d6, d7; unsigned int fsindex, gsindex; unsigned int ds, cs, es; + const char *board; printk("\n"); print_modules(); - printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s\n", + board = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!board) + board = ""; + printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s\n", current->pid, current->comm, print_tainted(), init_utsname()->release, (int)strcspn(init_utsname()->version, " "), - init_utsname()->version); + init_utsname()->version, board); printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip); printk_address(regs->ip, 1); printk(KERN_INFO "RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index df64aff..8d8fa99 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -620,7 +620,7 @@ struct x86_quirks *x86_quirks __initdata = &default_x86_quirks; static int __init dmi_low_memory_corruption(const struct dmi_system_id *d) { printk(KERN_NOTICE - "%s detected: BIOS may corrupt low RAM, working it around.\n", + "%s detected: BIOS may corrupt low RAM, working around it.\n", d->ident); e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED); diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index a7ed208..92f1c6f 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -931,7 +931,7 @@ static void lguest_restart(char *reason) * that we can fit comfortably. * * First we need assembly templates of each of the patchable Guest operations, - * and these are in lguest_asm.S. */ + * and these are in i386_head.S. */ /*G:060 We construct a table from the assembler templates: */ static const struct lguest_insns @@ -1093,7 +1093,7 @@ __init void lguest_init(void) acpi_ht = 0; #endif - /* We set the perferred console to "hvc". This is the "hypervisor + /* We set the preferred console to "hvc". This is the "hypervisor * virtual console" driver written by the PowerPC people, which we also * adapted for lguest's use. */ add_preferred_console("hvc", 0, NULL); diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c index 0ade625..66b7eb5 100644 --- a/arch/x86/mach-voyager/setup.c +++ b/arch/x86/mach-voyager/setup.c @@ -34,13 +34,23 @@ void __init intr_init_hook(void) setup_irq(2, &irq2); } -void __init pre_setup_arch_hook(void) +static void voyager_disable_tsc(void) { /* Voyagers run their CPUs from independent clocks, so disable * the TSC code because we can't sync them */ setup_clear_cpu_cap(X86_FEATURE_TSC); } +void __init pre_setup_arch_hook(void) +{ + voyager_disable_tsc(); +} + +void __init pre_time_init_hook(void) +{ + voyager_disable_tsc(); +} + void __init trap_init_hook(void) { } diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 331cd6d..328cb0c 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -81,7 +81,7 @@ static void enable_local_vic_irq(unsigned int irq); static void disable_local_vic_irq(unsigned int irq); static void before_handle_vic_irq(unsigned int irq); static void after_handle_vic_irq(unsigned int irq); -static void set_vic_irq_affinity(unsigned int irq, cpumask_t mask); +static void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask); static void ack_vic_irq(unsigned int irq); static void vic_enable_cpi(void); static void do_boot_cpu(__u8 cpuid); @@ -211,8 +211,6 @@ static __u32 cpu_booted_map; static cpumask_t smp_commenced_mask = CPU_MASK_NONE; /* This is for the new dynamic CPU boot code */ -cpumask_t cpu_callin_map = CPU_MASK_NONE; -cpumask_t cpu_callout_map = CPU_MASK_NONE; /* The per processor IRQ masks (these are usually kept in sync) */ static __u16 vic_irq_mask[NR_CPUS] __cacheline_aligned; @@ -378,7 +376,7 @@ void __init find_smp_config(void) cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24; - cpu_possible_map = phys_cpu_present_map; + init_cpu_possible(&phys_cpu_present_map); printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]); /* Here we set up the VIC to enable SMP */ @@ -1598,16 +1596,16 @@ static void after_handle_vic_irq(unsigned int irq) * change the mask and then do an interrupt enable CPI to re-enable on * the selected processors */ -void set_vic_irq_affinity(unsigned int irq, cpumask_t mask) +void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask) { /* Only extended processors handle interrupts */ unsigned long real_mask; unsigned long irq_mask = 1 << irq; int cpu; - real_mask = cpus_addr(mask)[0] & voyager_extended_vic_processors; + real_mask = cpus_addr(*mask)[0] & voyager_extended_vic_processors; - if (cpus_addr(mask)[0] == 0) + if (cpus_addr(*mask)[0] == 0) /* can't have no CPUs to accept the interrupt -- extremely * bad things will happen */ return; @@ -1748,10 +1746,11 @@ static void __cpuinit voyager_smp_prepare_boot_cpu(void) { switch_to_new_gdt(); - cpu_set(smp_processor_id(), cpu_online_map); - cpu_set(smp_processor_id(), cpu_callout_map); - cpu_set(smp_processor_id(), cpu_possible_map); - cpu_set(smp_processor_id(), cpu_present_map); + cpu_online_map = cpumask_of_cpu(smp_processor_id()); + cpu_callout_map = cpumask_of_cpu(smp_processor_id()); + cpu_callin_map = CPU_MASK_NONE; + cpu_present_map = cpumask_of_cpu(smp_processor_id()); + } static int __cpuinit voyager_cpu_up(unsigned int cpu) @@ -1780,9 +1779,9 @@ void __init smp_setup_processor_id(void) current_thread_info()->cpu = hard_smp_processor_id(); } -static void voyager_send_call_func(cpumask_t callmask) +static void voyager_send_call_func(const struct cpumask *callmask) { - __u32 mask = cpus_addr(callmask)[0] & ~(1 << smp_processor_id()); + __u32 mask = cpus_addr(*callmask)[0] & ~(1 << smp_processor_id()); send_CPI(mask, VIC_CALL_FUNCTION_CPI); } diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 4064345..fecbce6 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -572,6 +572,7 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route case PCI_DEVICE_ID_INTEL_ICH7_1: case PCI_DEVICE_ID_INTEL_ICH7_30: case PCI_DEVICE_ID_INTEL_ICH7_31: + case PCI_DEVICE_ID_INTEL_TGP_LPC: case PCI_DEVICE_ID_INTEL_ESB2_0: case PCI_DEVICE_ID_INTEL_ICH8_0: case PCI_DEVICE_ID_INTEL_ICH8_1: diff --git a/arch/x86/xen/multicalls.h b/arch/x86/xen/multicalls.h index e786fa7..9e565da 100644 --- a/arch/x86/xen/multicalls.h +++ b/arch/x86/xen/multicalls.h @@ -19,8 +19,10 @@ DECLARE_PER_CPU(unsigned long, xen_mc_irq_flags); paired with xen_mc_issue() */ static inline void xen_mc_batch(void) { + unsigned long flags; /* need to disable interrupts until this entry is complete */ - local_irq_save(__get_cpu_var(xen_mc_irq_flags)); + local_irq_save(flags); + __get_cpu_var(xen_mc_irq_flags) = flags; } static inline struct multicall_space xen_mc_entry(size_t args) diff --git a/block/blk-barrier.c b/block/blk-barrier.c index 8eba4e4..f7dae57 100644 --- a/block/blk-barrier.c +++ b/block/blk-barrier.c @@ -302,7 +302,7 @@ static void bio_end_empty_barrier(struct bio *bio, int err) * Description: * Issue a flush for the block device in question. Caller can supply * room for storing the error offset in case of a flush error, if they - * wish to. Caller must run wait_for_completion() on its own. + * wish to. */ int blkdev_issue_flush(struct block_device *bdev, sector_t *error_sector) { diff --git a/block/blk-core.c b/block/blk-core.c index a824e49..29bcfac 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -64,11 +64,12 @@ static struct workqueue_struct *kblockd_workqueue; static void drive_stat_acct(struct request *rq, int new_io) { + struct gendisk *disk = rq->rq_disk; struct hd_struct *part; int rw = rq_data_dir(rq); int cpu; - if (!blk_fs_request(rq) || !rq->rq_disk) + if (!blk_fs_request(rq) || !disk || !blk_do_io_stat(disk->queue)) return; cpu = part_stat_lock(); @@ -599,8 +600,7 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id) q->request_fn = rfn; q->prep_rq_fn = NULL; q->unplug_fn = generic_unplug_device; - q->queue_flags = (1 << QUEUE_FLAG_CLUSTER | - 1 << QUEUE_FLAG_STACKABLE); + q->queue_flags = QUEUE_FLAG_DEFAULT; q->queue_lock = lock; blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK); @@ -1125,6 +1125,8 @@ void init_request_from_bio(struct request *req, struct bio *bio) if (bio_sync(bio)) req->cmd_flags |= REQ_RW_SYNC; + if (bio_unplug(bio)) + req->cmd_flags |= REQ_UNPLUG; if (bio_rw_meta(bio)) req->cmd_flags |= REQ_RW_META; @@ -1141,6 +1143,7 @@ static int __make_request(struct request_queue *q, struct bio *bio) int el_ret, nr_sectors; const unsigned short prio = bio_prio(bio); const int sync = bio_sync(bio); + const int unplug = bio_unplug(bio); int rw_flags; nr_sectors = bio_sectors(bio); @@ -1244,7 +1247,7 @@ get_rq: blk_plug_device(q); add_request(q, req); out: - if (sync || blk_queue_nonrot(q)) + if (unplug || blk_queue_nonrot(q)) __generic_unplug_device(q); spin_unlock_irq(q->queue_lock); return 0; @@ -1448,6 +1451,11 @@ static inline void __generic_make_request(struct bio *bio) err = -EOPNOTSUPP; goto end_io; } + if (bio_barrier(bio) && bio_has_data(bio) && + (q->next_ordered == QUEUE_ORDERED_NONE)) { + err = -EOPNOTSUPP; + goto end_io; + } ret = q->make_request_fn(q, bio); } while (ret); @@ -1655,6 +1663,55 @@ void blkdev_dequeue_request(struct request *req) } EXPORT_SYMBOL(blkdev_dequeue_request); +static void blk_account_io_completion(struct request *req, unsigned int bytes) +{ + struct gendisk *disk = req->rq_disk; + + if (!disk || !blk_do_io_stat(disk->queue)) + return; + + if (blk_fs_request(req)) { + const int rw = rq_data_dir(req); + struct hd_struct *part; + int cpu; + + cpu = part_stat_lock(); + part = disk_map_sector_rcu(req->rq_disk, req->sector); + part_stat_add(cpu, part, sectors[rw], bytes >> 9); + part_stat_unlock(); + } +} + +static void blk_account_io_done(struct request *req) +{ + struct gendisk *disk = req->rq_disk; + + if (!disk || !blk_do_io_stat(disk->queue)) + return; + + /* + * Account IO completion. bar_rq isn't accounted as a normal + * IO on queueing nor completion. Accounting the containing + * request is enough. + */ + if (blk_fs_request(req) && req != &req->q->bar_rq) { + unsigned long duration = jiffies - req->start_time; + const int rw = rq_data_dir(req); + struct hd_struct *part; + int cpu; + + cpu = part_stat_lock(); + part = disk_map_sector_rcu(disk, req->sector); + + part_stat_inc(cpu, part, ios[rw]); + part_stat_add(cpu, part, ticks[rw], duration); + part_round_stats(cpu, part); + part_dec_in_flight(part); + + part_stat_unlock(); + } +} + /** * __end_that_request_first - end I/O on a request * @req: the request being processed @@ -1690,16 +1747,7 @@ static int __end_that_request_first(struct request *req, int error, (unsigned long long)req->sector); } - if (blk_fs_request(req) && req->rq_disk) { - const int rw = rq_data_dir(req); - struct hd_struct *part; - int cpu; - - cpu = part_stat_lock(); - part = disk_map_sector_rcu(req->rq_disk, req->sector); - part_stat_add(cpu, part, sectors[rw], nr_bytes >> 9); - part_stat_unlock(); - } + blk_account_io_completion(req, nr_bytes); total_bytes = bio_nbytes = 0; while ((bio = req->bio) != NULL) { @@ -1779,8 +1827,6 @@ static int __end_that_request_first(struct request *req, int error, */ static void end_that_request_last(struct request *req, int error) { - struct gendisk *disk = req->rq_disk; - if (blk_rq_tagged(req)) blk_queue_end_tag(req->q, req); @@ -1792,27 +1838,7 @@ static void end_that_request_last(struct request *req, int error) blk_delete_timer(req); - /* - * Account IO completion. bar_rq isn't accounted as a normal - * IO on queueing nor completion. Accounting the containing - * request is enough. - */ - if (disk && blk_fs_request(req) && req != &req->q->bar_rq) { - unsigned long duration = jiffies - req->start_time; - const int rw = rq_data_dir(req); - struct hd_struct *part; - int cpu; - - cpu = part_stat_lock(); - part = disk_map_sector_rcu(disk, req->sector); - - part_stat_inc(cpu, part, ios[rw]); - part_stat_add(cpu, part, ticks[rw], duration); - part_round_stats(cpu, part); - part_dec_in_flight(part); - - part_stat_unlock(); - } + blk_account_io_done(req); if (req->end_io) req->end_io(req, error); diff --git a/block/blk-integrity.c b/block/blk-integrity.c index 61a8e2f..91fa8e0 100644 --- a/block/blk-integrity.c +++ b/block/blk-integrity.c @@ -309,24 +309,24 @@ static struct kobj_type integrity_ktype = { /** * blk_integrity_register - Register a gendisk as being integrity-capable * @disk: struct gendisk pointer to make integrity-aware - * @template: integrity profile + * @template: optional integrity profile to register * * Description: When a device needs to advertise itself as being able * to send/receive integrity metadata it must use this function to * register the capability with the block layer. The template is a * blk_integrity struct with values appropriate for the underlying - * hardware. See Documentation/block/data-integrity.txt. + * hardware. If template is NULL the new profile is allocated but + * not filled out. See Documentation/block/data-integrity.txt. */ int blk_integrity_register(struct gendisk *disk, struct blk_integrity *template) { struct blk_integrity *bi; BUG_ON(disk == NULL); - BUG_ON(template == NULL); if (disk->integrity == NULL) { bi = kmem_cache_alloc(integrity_cachep, - GFP_KERNEL | __GFP_ZERO); + GFP_KERNEL | __GFP_ZERO); if (!bi) return -1; @@ -346,13 +346,16 @@ int blk_integrity_register(struct gendisk *disk, struct blk_integrity *template) bi = disk->integrity; /* Use the provided profile as template */ - bi->name = template->name; - bi->generate_fn = template->generate_fn; - bi->verify_fn = template->verify_fn; - bi->tuple_size = template->tuple_size; - bi->set_tag_fn = template->set_tag_fn; - bi->get_tag_fn = template->get_tag_fn; - bi->tag_size = template->tag_size; + if (template != NULL) { + bi->name = template->name; + bi->generate_fn = template->generate_fn; + bi->verify_fn = template->verify_fn; + bi->tuple_size = template->tuple_size; + bi->set_tag_fn = template->set_tag_fn; + bi->get_tag_fn = template->get_tag_fn; + bi->tag_size = template->tag_size; + } else + bi->name = "unsupported"; return 0; } diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index a29cb78..e29ddfc 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -130,6 +130,27 @@ static ssize_t queue_max_hw_sectors_show(struct request_queue *q, char *page) return queue_var_show(max_hw_sectors_kb, (page)); } +static ssize_t queue_nonrot_show(struct request_queue *q, char *page) +{ + return queue_var_show(!blk_queue_nonrot(q), page); +} + +static ssize_t queue_nonrot_store(struct request_queue *q, const char *page, + size_t count) +{ + unsigned long nm; + ssize_t ret = queue_var_store(&nm, page, count); + + spin_lock_irq(q->queue_lock); + if (nm) + queue_flag_clear(QUEUE_FLAG_NONROT, q); + else + queue_flag_set(QUEUE_FLAG_NONROT, q); + spin_unlock_irq(q->queue_lock); + + return ret; +} + static ssize_t queue_nomerges_show(struct request_queue *q, char *page) { return queue_var_show(blk_queue_nomerges(q), page); @@ -146,8 +167,8 @@ static ssize_t queue_nomerges_store(struct request_queue *q, const char *page, queue_flag_set(QUEUE_FLAG_NOMERGES, q); else queue_flag_clear(QUEUE_FLAG_NOMERGES, q); - spin_unlock_irq(q->queue_lock); + return ret; } @@ -176,6 +197,27 @@ queue_rq_affinity_store(struct request_queue *q, const char *page, size_t count) return ret; } +static ssize_t queue_iostats_show(struct request_queue *q, char *page) +{ + return queue_var_show(blk_queue_io_stat(q), page); +} + +static ssize_t queue_iostats_store(struct request_queue *q, const char *page, + size_t count) +{ + unsigned long stats; + ssize_t ret = queue_var_store(&stats, page, count); + + spin_lock_irq(q->queue_lock); + if (stats) + queue_flag_set(QUEUE_FLAG_IO_STAT, q); + else + queue_flag_clear(QUEUE_FLAG_IO_STAT, q); + spin_unlock_irq(q->queue_lock); + + return ret; +} + static struct queue_sysfs_entry queue_requests_entry = { .attr = {.name = "nr_requests", .mode = S_IRUGO | S_IWUSR }, .show = queue_requests_show, @@ -210,6 +252,12 @@ static struct queue_sysfs_entry queue_hw_sector_size_entry = { .show = queue_hw_sector_size_show, }; +static struct queue_sysfs_entry queue_nonrot_entry = { + .attr = {.name = "rotational", .mode = S_IRUGO | S_IWUSR }, + .show = queue_nonrot_show, + .store = queue_nonrot_store, +}; + static struct queue_sysfs_entry queue_nomerges_entry = { .attr = {.name = "nomerges", .mode = S_IRUGO | S_IWUSR }, .show = queue_nomerges_show, @@ -222,6 +270,12 @@ static struct queue_sysfs_entry queue_rq_affinity_entry = { .store = queue_rq_affinity_store, }; +static struct queue_sysfs_entry queue_iostats_entry = { + .attr = {.name = "iostats", .mode = S_IRUGO | S_IWUSR }, + .show = queue_iostats_show, + .store = queue_iostats_store, +}; + static struct attribute *default_attrs[] = { &queue_requests_entry.attr, &queue_ra_entry.attr, @@ -229,8 +283,10 @@ static struct attribute *default_attrs[] = { &queue_max_sectors_entry.attr, &queue_iosched_entry.attr, &queue_hw_sector_size_entry.attr, + &queue_nonrot_entry.attr, &queue_nomerges_entry.attr, &queue_rq_affinity_entry.attr, + &queue_iostats_entry.attr, NULL, }; diff --git a/block/blk.h b/block/blk.h index 6e1ed40..0dce92c 100644 --- a/block/blk.h +++ b/block/blk.h @@ -108,4 +108,12 @@ static inline int blk_cpu_to_group(int cpu) #endif } +static inline int blk_do_io_stat(struct request_queue *q) +{ + if (q) + return blk_queue_io_stat(q); + + return 0; +} + #endif diff --git a/block/blktrace.c b/block/blktrace.c index b0a2cae..39cc3bf 100644 --- a/block/blktrace.c +++ b/block/blktrace.c @@ -187,59 +187,12 @@ static void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes, static struct dentry *blk_tree_root; static DEFINE_MUTEX(blk_tree_mutex); -static unsigned int root_users; - -static inline void blk_remove_root(void) -{ - if (blk_tree_root) { - debugfs_remove(blk_tree_root); - blk_tree_root = NULL; - } -} - -static void blk_remove_tree(struct dentry *dir) -{ - mutex_lock(&blk_tree_mutex); - debugfs_remove(dir); - if (--root_users == 0) - blk_remove_root(); - mutex_unlock(&blk_tree_mutex); -} - -static struct dentry *blk_create_tree(const char *blk_name) -{ - struct dentry *dir = NULL; - int created = 0; - - mutex_lock(&blk_tree_mutex); - - if (!blk_tree_root) { - blk_tree_root = debugfs_create_dir("block", NULL); - if (!blk_tree_root) - goto err; - created = 1; - } - - dir = debugfs_create_dir(blk_name, blk_tree_root); - if (dir) - root_users++; - else { - /* Delete root only if we created it */ - if (created) - blk_remove_root(); - } - -err: - mutex_unlock(&blk_tree_mutex); - return dir; -} static void blk_trace_cleanup(struct blk_trace *bt) { - relay_close(bt->rchan); debugfs_remove(bt->msg_file); debugfs_remove(bt->dropped_file); - blk_remove_tree(bt->dir); + relay_close(bt->rchan); free_percpu(bt->sequence); free_percpu(bt->msg_data); kfree(bt); @@ -346,7 +299,18 @@ static int blk_subbuf_start_callback(struct rchan_buf *buf, void *subbuf, static int blk_remove_buf_file_callback(struct dentry *dentry) { + struct dentry *parent = dentry->d_parent; debugfs_remove(dentry); + + /* + * this will fail for all but the last file, but that is ok. what we + * care about is the top level buts->name directory going away, when + * the last trace file is gone. Then we don't have to rmdir() that + * manually on trace stop, so it nicely solves the issue with + * force killing of running traces. + */ + + debugfs_remove(parent); return 0; } @@ -404,7 +368,15 @@ int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev, goto err; ret = -ENOENT; - dir = blk_create_tree(buts->name); + + if (!blk_tree_root) { + blk_tree_root = debugfs_create_dir("block", NULL); + if (!blk_tree_root) + return -ENOMEM; + } + + dir = debugfs_create_dir(buts->name, blk_tree_root); + if (!dir) goto err; @@ -458,8 +430,6 @@ probe_err: atomic_dec(&blk_probes_ref); mutex_unlock(&blk_probe_mutex); err: - if (dir) - blk_remove_tree(dir); if (bt) { if (bt->msg_file) debugfs_remove(bt->msg_file); diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index e8525fa..664ebfd 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -84,6 +84,11 @@ struct cfq_data { */ struct cfq_rb_root service_tree; unsigned int busy_queues; + /* + * Used to track any pending rt requests so we can pre-empt current + * non-RT cfqq in service when this value is non-zero. + */ + unsigned int busy_rt_queues; int rq_in_driver; int sync_flight; @@ -562,6 +567,8 @@ static void cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq) BUG_ON(cfq_cfqq_on_rr(cfqq)); cfq_mark_cfqq_on_rr(cfqq); cfqd->busy_queues++; + if (cfq_class_rt(cfqq)) + cfqd->busy_rt_queues++; cfq_resort_rr_list(cfqd, cfqq); } @@ -581,6 +588,8 @@ static void cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq) BUG_ON(!cfqd->busy_queues); cfqd->busy_queues--; + if (cfq_class_rt(cfqq)) + cfqd->busy_rt_queues--; } /* @@ -1005,6 +1014,20 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd) goto expire; /* + * If we have a RT cfqq waiting, then we pre-empt the current non-rt + * cfqq. + */ + if (!cfq_class_rt(cfqq) && cfqd->busy_rt_queues) { + /* + * We simulate this as cfqq timed out so that it gets to bank + * the remaining of its time slice. + */ + cfq_log_cfqq(cfqd, cfqq, "preempt"); + cfq_slice_expired(cfqd, 1); + goto new_queue; + } + + /* * The active queue has requests and isn't expired, allow it to * dispatch. */ @@ -1067,6 +1090,13 @@ __cfq_dispatch_requests(struct cfq_data *cfqd, struct cfq_queue *cfqq, if (RB_EMPTY_ROOT(&cfqq->sort_list)) break; + /* + * If there is a non-empty RT cfqq waiting for current + * cfqq's timeslice to complete, pre-empt this cfqq + */ + if (!cfq_class_rt(cfqq) && cfqd->busy_rt_queues) + break; + } while (dispatched < max_dispatch); /* @@ -1801,6 +1831,12 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, if (rq_is_meta(rq) && !cfqq->meta_pending) return 1; + /* + * Allow an RT request to pre-empt an ongoing non-RT cfqq timeslice. + */ + if (cfq_class_rt(new_cfqq) && !cfq_class_rt(cfqq)) + return 1; + if (!cfqd->active_cic || !cfq_cfqq_wait_request(cfqq)) return 0; @@ -1870,7 +1906,8 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, /* * not the active queue - expire current slice if it is * idle and has expired it's mean thinktime or this new queue - * has some old slice time left and is of higher priority + * has some old slice time left and is of higher priority or + * this new queue is RT and the current one is BE */ cfq_preempt_queue(cfqd, cfqq); cfq_mark_cfqq_must_dispatch(cfqq); diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index bfd55b0..9f02959 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -44,6 +44,7 @@ #include <linux/device.h> #include <scsi/scsi_host.h> #include <linux/libata.h> +#include <linux/dmi.h> #define DRV_NAME "sata_sil" #define DRV_VERSION "2.4" diff --git a/drivers/base/core.c b/drivers/base/core.c index 55e5309..f3eae63 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1280,7 +1280,7 @@ EXPORT_SYMBOL_GPL(__root_device_register); /** * root_device_unregister - unregister and free a root device - * @root: device going away. + * @dev: device going away * * This function unregisters and cleans up a device that was created by * root_device_register(). diff --git a/drivers/char/selection.c b/drivers/char/selection.c index f29fbe9..cb8ca56 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -268,7 +268,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t /* Allocate a new buffer before freeing the old one ... */ multiplier = use_unicode ? 3 : 1; /* chars can take up to 3 bytes */ - bp = kmalloc((sel_end-sel_start)/2*multiplier+1, GFP_KERNEL); + bp = kmalloc(((sel_end-sel_start)/2+1)*multiplier, GFP_KERNEL); if (!bp) { printk(KERN_WARNING "selection: kmalloc() failed\n"); clear_selection(); diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c index 6bd91a1..7be2cf3 100644 --- a/drivers/firewire/fw-card.c +++ b/drivers/firewire/fw-card.c @@ -232,7 +232,7 @@ fw_card_bm_work(struct work_struct *work) root_id = root_node->node_id; grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10)); - if (card->bm_generation + 1 == generation || + if (is_next_generation(generation, card->bm_generation) || (card->bm_generation != generation && grace)) { /* * This first step is to figure out who is IRM and @@ -512,7 +512,7 @@ fw_core_remove_card(struct fw_card *card) fw_core_initiate_bus_reset(card, 1); mutex_lock(&card_mutex); - list_del(&card->link); + list_del_init(&card->link); mutex_unlock(&card_mutex); /* Set up the dummy driver. */ diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c index 2af5a8d..bf53acb 100644 --- a/drivers/firewire/fw-device.c +++ b/drivers/firewire/fw-device.c @@ -25,6 +25,7 @@ #include <linux/device.h> #include <linux/delay.h> #include <linux/idr.h> +#include <linux/jiffies.h> #include <linux/string.h> #include <linux/rwsem.h> #include <linux/semaphore.h> @@ -634,12 +635,39 @@ struct fw_device *fw_device_get_by_devt(dev_t devt) return device; } +/* + * These defines control the retry behavior for reading the config + * rom. It shouldn't be necessary to tweak these; if the device + * doesn't respond to a config rom read within 10 seconds, it's not + * going to respond at all. As for the initial delay, a lot of + * devices will be able to respond within half a second after bus + * reset. On the other hand, it's not really worth being more + * aggressive than that, since it scales pretty well; if 10 devices + * are plugged in, they're all getting read within one second. + */ + +#define MAX_RETRIES 10 +#define RETRY_DELAY (3 * HZ) +#define INITIAL_DELAY (HZ / 2) +#define SHUTDOWN_DELAY (2 * HZ) + static void fw_device_shutdown(struct work_struct *work) { struct fw_device *device = container_of(work, struct fw_device, work.work); int minor = MINOR(device->device.devt); + if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY) + && !list_empty(&device->card->link)) { + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); + return; + } + + if (atomic_cmpxchg(&device->state, + FW_DEVICE_GONE, + FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE) + return; + fw_device_cdev_remove(device); device_for_each_child(&device->device, NULL, shutdown_unit); device_unregister(&device->device); @@ -647,6 +675,7 @@ static void fw_device_shutdown(struct work_struct *work) down_write(&fw_device_rwsem); idr_remove(&fw_device_idr, minor); up_write(&fw_device_rwsem); + fw_device_put(device); } @@ -654,25 +683,63 @@ static struct device_type fw_device_type = { .release = fw_device_release, }; +static void fw_device_update(struct work_struct *work); + /* - * These defines control the retry behavior for reading the config - * rom. It shouldn't be necessary to tweak these; if the device - * doesn't respond to a config rom read within 10 seconds, it's not - * going to respond at all. As for the initial delay, a lot of - * devices will be able to respond within half a second after bus - * reset. On the other hand, it's not really worth being more - * aggressive than that, since it scales pretty well; if 10 devices - * are plugged in, they're all getting read within one second. + * If a device was pending for deletion because its node went away but its + * bus info block and root directory header matches that of a newly discovered + * device, revive the existing fw_device. + * The newly allocated fw_device becomes obsolete instead. */ +static int lookup_existing_device(struct device *dev, void *data) +{ + struct fw_device *old = fw_device(dev); + struct fw_device *new = data; + struct fw_card *card = new->card; + int match = 0; + + down_read(&fw_device_rwsem); /* serialize config_rom access */ + spin_lock_irq(&card->lock); /* serialize node access */ + + if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 && + atomic_cmpxchg(&old->state, + FW_DEVICE_GONE, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { + struct fw_node *current_node = new->node; + struct fw_node *obsolete_node = old->node; + + new->node = obsolete_node; + new->node->data = new; + old->node = current_node; + old->node->data = old; + + old->max_speed = new->max_speed; + old->node_id = current_node->node_id; + smp_wmb(); /* update node_id before generation */ + old->generation = card->generation; + old->config_rom_retries = 0; + fw_notify("rediscovered device %s\n", dev_name(dev)); -#define MAX_RETRIES 10 -#define RETRY_DELAY (3 * HZ) -#define INITIAL_DELAY (HZ / 2) + PREPARE_DELAYED_WORK(&old->work, fw_device_update); + schedule_delayed_work(&old->work, 0); + + if (current_node == card->root_node) + fw_schedule_bm_work(card, 0); + + match = 1; + } + + spin_unlock_irq(&card->lock); + up_read(&fw_device_rwsem); + + return match; +} static void fw_device_init(struct work_struct *work) { struct fw_device *device = container_of(work, struct fw_device, work.work); + struct device *revived_dev; int minor, err; /* @@ -696,6 +763,15 @@ static void fw_device_init(struct work_struct *work) return; } + revived_dev = device_find_child(device->card->device, + device, lookup_existing_device); + if (revived_dev) { + put_device(revived_dev); + fw_device_release(&device->device); + + return; + } + device_initialize(&device->device); fw_device_get(device); @@ -734,9 +810,10 @@ static void fw_device_init(struct work_struct *work) * fw_node_event(). */ if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) { - fw_device_shutdown(work); + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { + PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); } else { if (device->config_rom_retries) fw_notify("created device %s: GUID %08x%08x, S%d00, " @@ -847,8 +924,8 @@ static void fw_device_refresh(struct work_struct *work) case REREAD_BIB_UNCHANGED: if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) goto gone; fw_device_update(work); @@ -879,8 +956,8 @@ static void fw_device_refresh(struct work_struct *work) create_units(device); if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) goto gone; fw_notify("refreshed device %s\n", dev_name(&device->device)); @@ -890,8 +967,9 @@ static void fw_device_refresh(struct work_struct *work) give_up: fw_notify("giving up on refresh of device %s\n", dev_name(&device->device)); gone: - atomic_set(&device->state, FW_DEVICE_SHUTDOWN); - fw_device_shutdown(work); + atomic_set(&device->state, FW_DEVICE_GONE); + PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); out: if (node_id == card->root_node->node_id) fw_schedule_bm_work(card, 0); @@ -995,9 +1073,10 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event) */ device = node->data; if (atomic_xchg(&device->state, - FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) { + FW_DEVICE_GONE) == FW_DEVICE_RUNNING) { PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); - schedule_delayed_work(&device->work, 0); + schedule_delayed_work(&device->work, + list_empty(&card->link) ? 0 : SHUTDOWN_DELAY); } break; } diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h index df51732..8ef6ec2 100644 --- a/drivers/firewire/fw-device.h +++ b/drivers/firewire/fw-device.h @@ -28,6 +28,7 @@ enum fw_device_state { FW_DEVICE_INITIALIZING, FW_DEVICE_RUNNING, + FW_DEVICE_GONE, FW_DEVICE_SHUTDOWN, }; diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index ab9c01e..6d19828 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -226,7 +226,7 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card) #define CONTEXT_DEAD 0x0800 #define CONTEXT_ACTIVE 0x0400 -#define OHCI1394_MAX_AT_REQ_RETRIES 0x2 +#define OHCI1394_MAX_AT_REQ_RETRIES 0xf #define OHCI1394_MAX_AT_RESP_RETRIES 0x2 #define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8 @@ -896,11 +896,11 @@ static void context_stop(struct context *ctx) for (i = 0; i < 10; i++) { reg = reg_read(ctx->ohci, CONTROL_SET(ctx->regs)); if ((reg & CONTEXT_ACTIVE) == 0) - break; + return; - fw_notify("context_stop: still active (0x%08x)\n", reg); mdelay(1); } + fw_error("Error: DMA context still active (0x%08x)\n", reg); } struct driver_data { diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index e88d506..c71c441 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -168,6 +168,7 @@ struct sbp2_target { int address_high; unsigned int workarounds; unsigned int mgt_orb_timeout; + unsigned int max_payload; int dont_block; /* counter for each logical unit */ int blocked; /* ditto */ @@ -310,14 +311,16 @@ struct sbp2_command_orb { dma_addr_t page_table_bus; }; +#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */ +#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */ + /* * List of devices with known bugs. * * The firmware_revision field, masked with 0xffff00, is the best * indicator for the type of bridge chip of a device. It yields a few * false positives but this did not break correctly behaving devices - * so far. We use ~0 as a wildcard, since the 24 bit values we get - * from the config rom can never match that. + * so far. */ static const struct { u32 firmware_revision; @@ -339,33 +342,35 @@ static const struct { }, /* Initio bridges, actually only needed for some older ones */ { .firmware_revision = 0x000200, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_INQUIRY_36, }, /* PL-3507 bridge with Prolific firmware */ { .firmware_revision = 0x012800, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_POWER_CONDITION, }, /* Symbios bridge */ { .firmware_revision = 0xa0b800, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { .firmware_revision = 0x002600, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, - /* - * There are iPods (2nd gen, 3rd gen) with model_id == 0, but - * these iPods do not feature the read_capacity bug according - * to one report. Read_capacity behaviour as well as model_id - * could change due to Apple-supplied firmware updates though. + * iPod 2nd generation: needs 128k max transfer size workaround + * iPod 3rd generation: needs fix capacity workaround */ - - /* iPod 4th generation. */ { + { + .firmware_revision = 0x0a2700, + .model = 0x000000, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS | + SBP2_WORKAROUND_FIX_CAPACITY, + }, + /* iPod 4th generation */ { .firmware_revision = 0x0a2700, .model = 0x000021, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, @@ -1092,7 +1097,7 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model, continue; if (sbp2_workarounds_table[i].model != model && - sbp2_workarounds_table[i].model != ~0) + sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD) continue; w |= sbp2_workarounds_table[i].workarounds; @@ -1142,20 +1147,28 @@ static int sbp2_probe(struct device *dev) fw_device_get(device); fw_unit_get(unit); - /* Initialize to values that won't match anything in our table. */ - firmware_revision = 0xff000000; - model = 0xff000000; - /* implicit directory ID */ tgt->directory_id = ((unit->directory - device->config_rom) * 4 + CSR_CONFIG_ROM) & 0xffffff; + firmware_revision = SBP2_ROM_VALUE_MISSING; + model = SBP2_ROM_VALUE_MISSING; + if (sbp2_scan_unit_dir(tgt, unit->directory, &model, &firmware_revision) < 0) goto fail_tgt_put; sbp2_init_workarounds(tgt, model, firmware_revision); + /* + * At S100 we can do 512 bytes per packet, at S200 1024 bytes, + * and so on up to 4096 bytes. The SBP-2 max_payload field + * specifies the max payload size as 2 ^ (max_payload + 2), so + * if we set this to max_speed + 7, we get the right value. + */ + tgt->max_payload = min(device->max_speed + 7, 10U); + tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1); + /* Do the login in a workqueue so we can easily reschedule retries. */ list_for_each_entry(lu, &tgt->lu_list, link) sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5)); @@ -1273,6 +1286,19 @@ static struct fw_driver sbp2_driver = { .id_table = sbp2_id_table, }; +static void sbp2_unmap_scatterlist(struct device *card_device, + struct sbp2_command_orb *orb) +{ + if (scsi_sg_count(orb->cmd)) + dma_unmap_sg(card_device, scsi_sglist(orb->cmd), + scsi_sg_count(orb->cmd), + orb->cmd->sc_data_direction); + + if (orb->request.misc & cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT)) + dma_unmap_single(card_device, orb->page_table_bus, + sizeof(orb->page_table), DMA_TO_DEVICE); +} + static unsigned int sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data) { @@ -1352,15 +1378,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status) dma_unmap_single(device->card->device, orb->base.request_bus, sizeof(orb->request), DMA_TO_DEVICE); - - if (scsi_sg_count(orb->cmd) > 0) - dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd), - scsi_sg_count(orb->cmd), - orb->cmd->sc_data_direction); - - if (orb->page_table_bus != 0) - dma_unmap_single(device->card->device, orb->page_table_bus, - sizeof(orb->page_table), DMA_TO_DEVICE); + sbp2_unmap_scatterlist(device->card->device, orb); orb->cmd->result = result; orb->done(orb->cmd); @@ -1434,7 +1452,6 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) struct sbp2_logical_unit *lu = cmd->device->hostdata; struct fw_device *device = fw_device(lu->tgt->unit->device.parent); struct sbp2_command_orb *orb; - unsigned int max_payload; int generation, retval = SCSI_MLQUEUE_HOST_BUSY; /* @@ -1462,17 +1479,9 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) orb->done = done; orb->cmd = cmd; - orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL); - /* - * At speed 100 we can do 512 bytes per packet, at speed 200, - * 1024 bytes per packet etc. The SBP-2 max_payload field - * specifies the max payload size as 2 ^ (max_payload + 2), so - * if we set this to max_speed + 7, we get the right value. - */ - max_payload = min(device->max_speed + 7, - device->card->max_receive - 1); + orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL); orb->request.misc = cpu_to_be32( - COMMAND_ORB_MAX_PAYLOAD(max_payload) | + COMMAND_ORB_MAX_PAYLOAD(lu->tgt->max_payload) | COMMAND_ORB_SPEED(device->max_speed) | COMMAND_ORB_NOTIFY); @@ -1491,8 +1500,10 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) orb->base.request_bus = dma_map_single(device->card->device, &orb->request, sizeof(orb->request), DMA_TO_DEVICE); - if (dma_mapping_error(device->card->device, orb->base.request_bus)) + if (dma_mapping_error(device->card->device, orb->base.request_bus)) { + sbp2_unmap_scatterlist(device->card->device, orb); goto out; + } sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, generation, lu->command_block_agent_address + SBP2_ORB_POINTER); diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index c9be6e6..8dd6703 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -518,6 +518,18 @@ fw_core_handle_bus_reset(struct fw_card *card, struct fw_node *local_node; unsigned long flags; + /* + * If the selfID buffer is not the immediate successor of the + * previously processed one, we cannot reliably compare the + * old and new topologies. + */ + if (!is_next_generation(generation, card->generation) && + card->local_node != NULL) { + fw_notify("skipped bus generations, destroying all nodes\n"); + fw_destroy_nodes(card); + card->bm_retries = 0; + } + spin_lock_irqsave(&card->lock, flags); card->node_id = node_id; diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index c9ab12a..1d78e9c 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -276,6 +276,15 @@ static inline void fw_card_put(struct fw_card *card) extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay); /* + * Check whether new_generation is the immediate successor of old_generation. + * Take counter roll-over at 255 (as per to OHCI) into account. + */ +static inline bool is_next_generation(int new_generation, int old_generation) +{ + return (new_generation & 0xff) == ((old_generation + 1) & 0xff); +} + +/* * The iso packet format allows for an immediate header/payload part * stored in 'header' immediately after the packet info plus an * indirect payload part that is pointer to by the 'payload' field. diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 35e7aea..42fb2fd 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -789,6 +789,7 @@ int gpio_request(unsigned gpio, const char *label) } else { status = -EBUSY; module_put(chip->owner); + goto done; } if (chip->request) { diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 9da5814..6915fb8 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -136,7 +136,7 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size) obj = kcalloc(1, sizeof(*obj), GFP_KERNEL); obj->dev = dev; - obj->filp = shmem_file_setup("drm mm object", size, 0); + obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE); if (IS_ERR(obj->filp)) { kfree(obj); return NULL; diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 6b1148f..b36a521 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -311,7 +311,7 @@ static int intel_lvds_get_modes(struct drm_connector *connector) if (dev_priv->panel_fixed_mode != NULL) { struct drm_display_mode *mode; - mutex_unlock(&dev->mode_config.mutex); + mutex_lock(&dev->mode_config.mutex); mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); drm_mode_probed_add(connector, mode); mutex_unlock(&dev->mode_config.mutex); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 5d7640e..6cad69e 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1218,6 +1218,7 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask) } EXPORT_SYMBOL_GPL(hid_connect); +/* a list of devices for which there is a specialized driver on HID bus */ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, @@ -1476,6 +1477,7 @@ static struct bus_type hid_bus_type = { .uevent = hid_uevent, }; +/* a list of devices that shouldn't be handled by HID core at all */ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR) }, { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302) }, @@ -1606,6 +1608,8 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index acc1abc..e899f51 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -362,6 +362,8 @@ #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD 0x0038 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2 0x0036 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3 0x0034 +#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4 0x0044 +#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5 0x0045 #define USB_VENDOR_ID_SUN 0x0430 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index d718b16..25b10dc 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -30,7 +30,7 @@ #define MS_NOGET 0x10 /* - * Microsoft Wireless Desktop Receiver (Model 1028) has several + * Microsoft Wireless Desktop Receiver (Model 1028) has * 'Usage Min/Max' where it ought to have 'Physical Min/Max' */ static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, @@ -38,17 +38,12 @@ static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, { unsigned long quirks = (unsigned long)hid_get_drvdata(hdev); - if ((quirks & MS_RDESC) && rsize == 571 && rdesc[284] == 0x19 && - rdesc[286] == 0x2a && rdesc[304] == 0x19 && - rdesc[306] == 0x29 && rdesc[352] == 0x1a && - rdesc[355] == 0x2a && rdesc[557] == 0x19 && + if ((quirks & MS_RDESC) && rsize == 571 && rdesc[557] == 0x19 && rdesc[559] == 0x29) { dev_info(&hdev->dev, "fixing up Microsoft Wireless Receiver " "Model 1028 report descriptor\n"); - rdesc[284] = rdesc[304] = rdesc[557] = 0x35; - rdesc[352] = 0x36; - rdesc[286] = rdesc[355] = 0x46; - rdesc[306] = rdesc[559] = 0x45; + rdesc[557] = 0x35; + rdesc[559] = 0x45; } } diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index d73eea3..4940e4d 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -656,7 +656,7 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case HIDIOCGSTRING: mutex_lock(&hiddev->existancelock); - if (!hiddev->exist) + if (hiddev->exist) r = hiddev_ioctl_string(hiddev, cmd, user_arg); else r = -ENODEV; diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index e301862..678e34b 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -83,7 +83,7 @@ /* * Temperature sensors keys (sp78 - 2 bytes). */ -static const char* temperature_sensors_sets[][36] = { +static const char *temperature_sensors_sets[][41] = { /* Set 0: Macbook Pro */ { "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H", "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL }, @@ -135,6 +135,13 @@ static const char* temperature_sensors_sets[][36] = { { "TB0T", "TB1S", "TB1T", "TB2S", "TB2T", "TC0D", "TN0D", "TTF0", "TV0P", "TVFP", "TW0P", "Th0P", "Tp0P", "Tp1P", "TpFP", "Ts0P", "Ts0S", NULL }, +/* Set 16: Mac Pro 3,1 (2 x Quad-Core) */ + { "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P", + "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "TH0P", "TH1P", + "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", "TM1P", + "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S", + "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S", + NULL }, }; /* List of keys used to read/write fan speeds */ @@ -1153,6 +1160,16 @@ static SENSOR_DEVICE_ATTR(temp34_input, S_IRUGO, applesmc_show_temperature, NULL, 33); static SENSOR_DEVICE_ATTR(temp35_input, S_IRUGO, applesmc_show_temperature, NULL, 34); +static SENSOR_DEVICE_ATTR(temp36_input, S_IRUGO, + applesmc_show_temperature, NULL, 35); +static SENSOR_DEVICE_ATTR(temp37_input, S_IRUGO, + applesmc_show_temperature, NULL, 36); +static SENSOR_DEVICE_ATTR(temp38_input, S_IRUGO, + applesmc_show_temperature, NULL, 37); +static SENSOR_DEVICE_ATTR(temp39_input, S_IRUGO, + applesmc_show_temperature, NULL, 38); +static SENSOR_DEVICE_ATTR(temp40_input, S_IRUGO, + applesmc_show_temperature, NULL, 39); static struct attribute *temperature_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, @@ -1190,6 +1207,11 @@ static struct attribute *temperature_attributes[] = { &sensor_dev_attr_temp33_input.dev_attr.attr, &sensor_dev_attr_temp34_input.dev_attr.attr, &sensor_dev_attr_temp35_input.dev_attr.attr, + &sensor_dev_attr_temp36_input.dev_attr.attr, + &sensor_dev_attr_temp37_input.dev_attr.attr, + &sensor_dev_attr_temp38_input.dev_attr.attr, + &sensor_dev_attr_temp39_input.dev_attr.attr, + &sensor_dev_attr_temp40_input.dev_attr.attr, NULL }; @@ -1312,6 +1334,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 0, .light = 0, .temperature_set = 14 }, /* MacBook Air 2,1: accelerometer, backlight and temperature set 15 */ { .accelerometer = 1, .light = 1, .temperature_set = 15 }, +/* MacPro3,1: temperature set 16 */ + { .accelerometer = 0, .light = 0, .temperature_set = 16 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1369,6 +1393,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") }, &applesmc_dmi_data[4]}, + { applesmc_dmi_match, "Apple MacPro3", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacPro3") }, + &applesmc_dmi_data[16]}, { applesmc_dmi_match, "Apple MacPro", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") }, diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index b1c6f68..3dad229 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -465,6 +465,16 @@ config BLK_DEV_CS5535 It is safe to say Y to this question. +config BLK_DEV_CS5536 + tristate "CS5536 chipset support" + depends on X86_32 + select BLK_DEV_IDEDMA_PCI + help + This option enables support for the AMD CS5536 + companion chip used with the Geode LX processor family. + + If unsure, say N. + config BLK_DEV_HPT366 tristate "HPT36X/37X chipset support" select BLK_DEV_IDEDMA_PCI diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index c2b9c93..d0e3d7d 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o +obj-$(CONFIG_BLK_DEV_CS5536) += cs5536.o obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c new file mode 100644 index 0000000..7a62db7 --- /dev/null +++ b/drivers/ide/cs5536.c @@ -0,0 +1,308 @@ +/* + * CS5536 PATA support + * (C) 2007 Martin K. Petersen <mkp@mkp.net> + * (C) 2009 Bartlomiej Zolnierkiewicz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Documentation: + * Available from AMD web site. + * + * The IDE timing registers for the CS5536 live in the Geode Machine + * Specific Register file and not PCI config space. Most BIOSes + * virtualize the PCI registers so the chip looks like a standard IDE + * controller. Unfortunately not all implementations get this right. + * In particular some have problems with unaligned accesses to the + * virtualized PCI registers. This driver always does full dword + * writes to work around the issue. Also, in case of a bad BIOS this + * driver can be loaded with the "msr=1" parameter which forces using + * the Machine Specific Registers to configure the device. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ide.h> +#include <asm/msr.h> + +#define DRV_NAME "cs5536" + +enum { + MSR_IDE_CFG = 0x51300010, + PCI_IDE_CFG = 0x40, + + CFG = 0, + DTC = 2, + CAST = 3, + ETC = 4, + + IDE_CFG_CHANEN = (1 << 1), + IDE_CFG_CABLE = (1 << 17) | (1 << 16), + + IDE_D0_SHIFT = 24, + IDE_D1_SHIFT = 16, + IDE_DRV_MASK = 0xff, + + IDE_CAST_D0_SHIFT = 6, + IDE_CAST_D1_SHIFT = 4, + IDE_CAST_DRV_MASK = 0x3, + + IDE_CAST_CMD_SHIFT = 24, + IDE_CAST_CMD_MASK = 0xff, + + IDE_ETC_UDMA_MASK = 0xc0, +}; + +static int use_msr; + +static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val) +{ + if (unlikely(use_msr)) { + u32 dummy; + + rdmsr(MSR_IDE_CFG + reg, *val, dummy); + return 0; + } + + return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val); +} + +static int cs5536_write(struct pci_dev *pdev, int reg, int val) +{ + if (unlikely(use_msr)) { + wrmsr(MSR_IDE_CFG + reg, val, 0); + return 0; + } + + return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val); +} + +static void cs5536_program_dtc(ide_drive_t *drive, u8 tim) +{ + struct pci_dev *pdev = to_pci_dev(drive->hwif->dev); + int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT; + u32 dtc; + + cs5536_read(pdev, DTC, &dtc); + dtc &= ~(IDE_DRV_MASK << dshift); + dtc |= tim << dshift; + cs5536_write(pdev, DTC, dtc); +} + +/** + * cs5536_cable_detect - detect cable type + * @hwif: Port to detect on + * + * Perform cable detection for ATA66 capable cable. + * + * Returns a cable type. + */ + +static u8 cs5536_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *pdev = to_pci_dev(hwif->dev); + u32 cfg; + + cs5536_read(pdev, CFG, &cfg); + + if (cfg & IDE_CFG_CABLE) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +/** + * cs5536_set_pio_mode - PIO timing setup + * @drive: ATA device + * @pio: PIO mode number + */ + +static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio) +{ + static const u8 drv_timings[5] = { + 0x98, 0x55, 0x32, 0x21, 0x20, + }; + + static const u8 addr_timings[5] = { + 0x2, 0x1, 0x0, 0x0, 0x0, + }; + + static const u8 cmd_timings[5] = { + 0x99, 0x92, 0x90, 0x22, 0x20, + }; + + struct pci_dev *pdev = to_pci_dev(drive->hwif->dev); + ide_drive_t *pair = ide_get_pair_dev(drive); + int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT; + u32 cast; + u8 cmd_pio = pio; + + if (pair) + cmd_pio = min(pio, ide_get_best_pio_mode(pair, 255, 4)); + + drive->drive_data &= (IDE_DRV_MASK << 8); + drive->drive_data |= drv_timings[pio]; + + cs5536_program_dtc(drive, drv_timings[pio]); + + cs5536_read(pdev, CAST, &cast); + + cast &= ~(IDE_CAST_DRV_MASK << cshift); + cast |= addr_timings[pio] << cshift; + + cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT); + cast |= cmd_timings[cmd_pio] << IDE_CAST_CMD_SHIFT; + + cs5536_write(pdev, CAST, cast); +} + +/** + * cs5536_set_dma_mode - DMA timing setup + * @drive: ATA device + * @mode: DMA mode + */ + +static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode) +{ + static const u8 udma_timings[6] = { + 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, + }; + + static const u8 mwdma_timings[3] = { + 0x67, 0x21, 0x20, + }; + + struct pci_dev *pdev = to_pci_dev(drive->hwif->dev); + int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT; + u32 etc; + + cs5536_read(pdev, ETC, &etc); + + if (mode >= XFER_UDMA_0) { + etc &= ~(IDE_DRV_MASK << dshift); + etc |= udma_timings[mode - XFER_UDMA_0] << dshift; + } else { /* MWDMA */ + etc &= ~(IDE_ETC_UDMA_MASK << dshift); + drive->drive_data &= IDE_DRV_MASK; + drive->drive_data |= mwdma_timings[mode - XFER_MW_DMA_0] << 8; + } + + cs5536_write(pdev, ETC, etc); +} + +static void cs5536_dma_start(ide_drive_t *drive) +{ + if (drive->current_speed < XFER_UDMA_0 && + (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK)) + cs5536_program_dtc(drive, drive->drive_data >> 8); + + ide_dma_start(drive); +} + +static int cs5536_dma_end(ide_drive_t *drive) +{ + int ret = ide_dma_end(drive); + + if (drive->current_speed < XFER_UDMA_0 && + (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK)) + cs5536_program_dtc(drive, drive->drive_data & IDE_DRV_MASK); + + return ret; +} + +static const struct ide_port_ops cs5536_port_ops = { + .set_pio_mode = cs5536_set_pio_mode, + .set_dma_mode = cs5536_set_dma_mode, + .cable_detect = cs5536_cable_detect, +}; + +static const struct ide_dma_ops cs5536_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = cs5536_dma_start, + .dma_end = cs5536_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + +static const struct ide_port_info cs5536_info = { + .name = DRV_NAME, + .port_ops = &cs5536_port_ops, + .dma_ops = &cs5536_dma_ops, + .host_flags = IDE_HFLAG_SINGLE, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, +}; + +/** + * cs5536_init_one + * @dev: PCI device + * @id: Entry in match table + */ + +static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + u32 cfg; + + if (use_msr) + printk(KERN_INFO DRV_NAME ": Using MSR regs instead of PCI\n"); + + cs5536_read(dev, CFG, &cfg); + + if ((cfg & IDE_CFG_CHANEN) == 0) { + printk(KERN_ERR DRV_NAME ": disabled by BIOS\n"); + return -ENODEV; + } + + return ide_pci_init_one(dev, &cs5536_info, NULL); +} + +static const struct pci_device_id cs5536_pci_tbl[] = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), }, + { }, +}; + +static struct pci_driver cs5536_pci_driver = { + .name = DRV_NAME, + .id_table = cs5536_pci_tbl, + .probe = cs5536_init_one, + .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, +}; + +static int __init cs5536_init(void) +{ + return pci_register_driver(&cs5536_pci_driver); +} + +static void __exit cs5536_exit(void) +{ + pci_unregister_driver(&cs5536_pci_driver); +} + +MODULE_AUTHOR("Martin K. Petersen, Bartlomiej Zolnierkiewicz"); +MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cs5536_pci_tbl); + +module_param_named(msr, use_msr, int, 0644); +MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)"); + +module_init(cs5536_init); +module_exit(cs5536_exit); diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 97a35c6..415d7e2 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -534,7 +534,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) d.dma_ops = NULL; } - ret = ide_host_register(host, NULL, hws); + ret = ide_host_register(host, &d, hws); if (ret) goto err_free; diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index d8f295b..ec7d07f 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -282,7 +282,7 @@ static int do_drive_get_GTF(ide_drive_t *drive, port = hwif->channel ? drive->dn - 2: drive->dn; DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n", - hwif->name, dev->bus_id, port, hwif->channel); + hwif->name, dev_name(dev), port, hwif->channel); if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) { DEBPRINT("%s drive %d:%d not present\n", diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index cae6937..0bfeb0c 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -787,6 +787,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (blk_fs_request(rq)) { ide_end_request(drive, 1, rq->nr_sectors); return ide_stopped; + } else if (rq->cmd_type == REQ_TYPE_ATA_PC && !rq->bio) { + ide_end_request(drive, 1, 1); + return ide_stopped; } goto end_request; } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index cc16331..9ee51ad 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -418,11 +418,14 @@ void ide_map_sg(ide_drive_t *drive, struct request *rq) ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg = hwif->sg_table; - if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) { - hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); - } else { + if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE); hwif->sg_nents = 1; + } else if (!rq->bio) { + sg_init_one(sg, rq->data, rq->data_len); + hwif->sg_nents = 1; + } else { + hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); } } diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 0db1ed9..ce0818a 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1467,6 +1467,30 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws) } EXPORT_SYMBOL_GPL(ide_host_alloc); +static void ide_port_free(ide_hwif_t *hwif) +{ + ide_port_free_devices(hwif); + ide_free_port_slot(hwif->index); + kfree(hwif); +} + +static void ide_disable_port(ide_hwif_t *hwif) +{ + struct ide_host *host = hwif->host; + int i; + + printk(KERN_INFO "%s: disabling port\n", hwif->name); + + for (i = 0; i < MAX_HOST_PORTS; i++) { + if (host->ports[i] == hwif) { + host->ports[i] = NULL; + host->n_ports--; + } + } + + ide_port_free(hwif); +} + int ide_host_register(struct ide_host *host, const struct ide_port_info *d, hw_regs_t **hws) { @@ -1507,8 +1531,12 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, hwif->present = 1; if (hwif->chipset != ide_4drives || !hwif->mate || - !hwif->mate->present) - ide_register_port(hwif); + !hwif->mate->present) { + if (ide_register_port(hwif)) { + ide_disable_port(hwif); + continue; + } + } if (hwif->present) ide_port_tune_devices(hwif); @@ -1521,7 +1549,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, if (hwif_init(hwif) == 0) { printk(KERN_INFO "%s: failed to initialize IDE " "interface\n", hwif->name); - hwif->present = 0; + device_unregister(&hwif->gendev); + ide_disable_port(hwif); continue; } @@ -1660,12 +1689,8 @@ void ide_host_free(struct ide_host *host) int i; ide_host_for_each_port(i, hwif, host) { - if (hwif == NULL) - continue; - - ide_port_free_devices(hwif); - ide_free_port_slot(hwif->index); - kfree(hwif); + if (hwif) + ide_port_free(hwif); } kfree(host); diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index 882f6f0..40b0812 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -261,9 +261,9 @@ static int tx4939ide_build_dmatable(ide_drive_t *drive, struct request *rq) bcount = cur_len; /* * This workaround for zero count seems required. - * (standard ide_build_dmatable do it too) + * (standard ide_build_dmatable does it too) */ - if ((bcount & 0xffff) == 0x0000) + if (bcount == 0x10000) bcount = 0x8000; *table++ = bcount & 0xffff; *table++ = cur_addr; diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index 703c3ee..6092fe3 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -448,6 +448,11 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS; #endif +#ifdef CONFIG_AMIGAONE + if (machine_is(amigaone)) + d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS; +#endif + d.udma_mask = via_config->udma_mask; vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); diff --git a/drivers/ieee1394/ieee1394.h b/drivers/ieee1394/ieee1394.h index e0ae0d3..af320e2 100644 --- a/drivers/ieee1394/ieee1394.h +++ b/drivers/ieee1394/ieee1394.h @@ -54,9 +54,7 @@ #define IEEE1394_SPEED_800 0x03 #define IEEE1394_SPEED_1600 0x04 #define IEEE1394_SPEED_3200 0x05 - -/* The current highest tested speed supported by the subsystem */ -#define IEEE1394_SPEED_MAX IEEE1394_SPEED_800 +#define IEEE1394_SPEED_MAX IEEE1394_SPEED_3200 /* Maps speed values above to a string representation */ extern const char *hpsb_speedto_str[]; diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c index dcdb71a..2beb8d9 100644 --- a/drivers/ieee1394/ieee1394_core.c +++ b/drivers/ieee1394/ieee1394_core.c @@ -338,6 +338,7 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) u8 cldcnt[nodecount]; u8 *map = host->speed_map; u8 *speedcap = host->speed; + u8 local_link_speed = host->csr.lnk_spd; struct selfid *sid; struct ext_selfid *esid; int i, j, n; @@ -373,8 +374,8 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) if (sid->port2 == SELFID_PORT_CHILD) cldcnt[n]++; speedcap[n] = sid->speed; - if (speedcap[n] > host->csr.lnk_spd) - speedcap[n] = host->csr.lnk_spd; + if (speedcap[n] > local_link_speed) + speedcap[n] = local_link_speed; n--; } } @@ -407,12 +408,11 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) } } -#if SELFID_SPEED_UNKNOWN != IEEE1394_SPEED_MAX - /* assume maximum speed for 1394b PHYs, nodemgr will correct it */ - for (n = 0; n < nodecount; n++) - if (speedcap[n] == SELFID_SPEED_UNKNOWN) - speedcap[n] = IEEE1394_SPEED_MAX; -#endif + /* assume a maximum speed for 1394b PHYs, nodemgr will correct it */ + if (local_link_speed > SELFID_SPEED_UNKNOWN) + for (i = 0; i < nodecount; i++) + if (speedcap[i] == SELFID_SPEED_UNKNOWN) + speedcap[i] = local_link_speed; } diff --git a/drivers/ieee1394/ohci1394.h b/drivers/ieee1394/ohci1394.h index 4320bf01..7fb8ab9 100644 --- a/drivers/ieee1394/ohci1394.h +++ b/drivers/ieee1394/ohci1394.h @@ -26,7 +26,7 @@ #define OHCI1394_DRIVER_NAME "ohci1394" -#define OHCI1394_MAX_AT_REQ_RETRIES 0x2 +#define OHCI1394_MAX_AT_REQ_RETRIES 0xf #define OHCI1394_MAX_AT_RESP_RETRIES 0x2 #define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8 #define OHCI1394_MAX_SELF_ID_ERRORS 16 diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index ab1034c..f3fd865 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -115,8 +115,8 @@ */ static int sbp2_max_speed = IEEE1394_SPEED_MAX; module_param_named(max_speed, sbp2_max_speed, int, 0644); -MODULE_PARM_DESC(max_speed, "Force max speed " - "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)"); +MODULE_PARM_DESC(max_speed, "Limit data transfer speed (5 <= 3200, " + "4 <= 1600, 3 <= 800, 2 <= 400, 1 <= 200, 0 = 100 Mb/s)"); /* * Set serialize_io to 0 or N to use dynamically appended lists of command ORBs. @@ -256,7 +256,7 @@ static int sbp2_set_busy_timeout(struct sbp2_lu *); static int sbp2_max_speed_and_size(struct sbp2_lu *); -static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC }; +static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xa, 0xa, 0xa }; static DEFINE_RWLOCK(sbp2_hi_logical_units_lock); @@ -347,8 +347,8 @@ static struct scsi_host_template sbp2_shost_template = { .sdev_attrs = sbp2_sysfs_sdev_attrs, }; -/* for match-all entries in sbp2_workarounds_table */ -#define SBP2_ROM_VALUE_WILDCARD 0x1000000 +#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */ +#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */ /* * List of devices with known bugs. @@ -359,60 +359,70 @@ static struct scsi_host_template sbp2_shost_template = { */ static const struct { u32 firmware_revision; - u32 model_id; + u32 model; unsigned workarounds; } sbp2_workarounds_table[] = { /* DViCO Momobay CX-1 with TSB42AA9 bridge */ { .firmware_revision = 0x002800, - .model_id = 0x001010, + .model = 0x001010, .workarounds = SBP2_WORKAROUND_INQUIRY_36 | SBP2_WORKAROUND_MODE_SENSE_8 | SBP2_WORKAROUND_POWER_CONDITION, }, /* DViCO Momobay FX-3A with TSB42AA9A bridge */ { .firmware_revision = 0x002800, - .model_id = 0x000000, + .model = 0x000000, .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY | SBP2_WORKAROUND_POWER_CONDITION, }, /* Initio bridges, actually only needed for some older ones */ { .firmware_revision = 0x000200, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_INQUIRY_36, }, /* PL-3507 bridge with Prolific firmware */ { .firmware_revision = 0x012800, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_POWER_CONDITION, }, /* Symbios bridge */ { .firmware_revision = 0xa0b800, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { .firmware_revision = 0x002600, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, + /* + * iPod 2nd generation: needs 128k max transfer size workaround + * iPod 3rd generation: needs fix capacity workaround + */ + { + .firmware_revision = 0x0a2700, + .model = 0x000000, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS | + SBP2_WORKAROUND_FIX_CAPACITY, + }, /* iPod 4th generation */ { .firmware_revision = 0x0a2700, - .model_id = 0x000021, + .model = 0x000021, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod mini */ { .firmware_revision = 0x0a2700, - .model_id = 0x000022, + .model = 0x000022, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod mini */ { .firmware_revision = 0x0a2700, - .model_id = 0x000023, + .model = 0x000023, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod Photo */ { .firmware_revision = 0x0a2700, - .model_id = 0x00007e, + .model = 0x00007e, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, } }; @@ -1341,13 +1351,15 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, struct csr1212_keyval *kv; struct csr1212_dentry *dentry; u64 management_agent_addr; - u32 unit_characteristics, firmware_revision; + u32 unit_characteristics, firmware_revision, model; unsigned workarounds; int i; management_agent_addr = 0; unit_characteristics = 0; - firmware_revision = 0; + firmware_revision = SBP2_ROM_VALUE_MISSING; + model = ud->flags & UNIT_DIRECTORY_MODEL_ID ? + ud->model_id : SBP2_ROM_VALUE_MISSING; csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) { switch (kv->key.id) { @@ -1388,9 +1400,9 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, sbp2_workarounds_table[i].firmware_revision != (firmware_revision & 0xffff00)) continue; - if (sbp2_workarounds_table[i].model_id != + if (sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD && - sbp2_workarounds_table[i].model_id != ud->model_id) + sbp2_workarounds_table[i].model != model) continue; workarounds |= sbp2_workarounds_table[i].workarounds; break; @@ -1403,7 +1415,7 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid), workarounds, firmware_revision, ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id, - ud->model_id); + model); /* We would need one SCSI host template for each target to adjust * max_sectors on the fly, therefore warn only. */ diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c index 90663e0..60156df 100644 --- a/drivers/lguest/core.c +++ b/drivers/lguest/core.c @@ -224,7 +224,7 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user) break; /* If the Guest asked to be stopped, we sleep. The Guest's - * clock timer or LHCALL_BREAK from the Waker will wake us. */ + * clock timer or LHREQ_BREAK from the Waker will wake us. */ if (cpu->halted) { set_current_state(TASK_INTERRUPTIBLE); schedule(); diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index 34bc017..b8ee103 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -307,9 +307,8 @@ static int close(struct inode *inode, struct file *file) * kmalloc()ed string, either of which is ok to hand to kfree(). */ if (!IS_ERR(lg->dead)) kfree(lg->dead); - /* We clear the entire structure, which also marks it as free for the - * next user. */ - memset(lg, 0, sizeof(*lg)); + /* Free the memory allocated to the lguest_struct */ + kfree(lg); /* Release lock and exit. */ mutex_unlock(&lguest_lock); diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index 6098b62..47fee05 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -576,6 +576,7 @@ static int set_control(struct saa7146_fh *fh, struct v4l2_control *c) vv->vflip = c->value; break; default: { + mutex_unlock(&dev->lock); return -EINVAL; } } diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c index 64379f2..3ec2894 100644 --- a/drivers/media/common/tuners/mxl5007t.c +++ b/drivers/media/common/tuners/mxl5007t.c @@ -657,7 +657,7 @@ static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status) { struct mxl5007t_state *state = fe->tuner_priv; int rf_locked, ref_locked; - s32 rf_input_level; + s32 rf_input_level = 0; int ret; if (fe->ops.i2c_gate_ctrl) diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c index 98ee167..7e3aeaa 100644 --- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c +++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c @@ -93,6 +93,9 @@ struct dvb_ca_slot { /* current state of the CAM */ int slot_state; + /* mutex used for serializing access to one CI slot */ + struct mutex slot_lock; + /* Number of CAMCHANGES that have occurred since last processing */ atomic_t camchange_count; @@ -711,14 +714,20 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * b dprintk("%s\n", __func__); - // sanity check + /* sanity check */ if (bytes_write > ca->slot_info[slot].link_buf_size) return -EINVAL; - /* check if interface is actually waiting for us to read from it, or if a read is in progress */ + /* it is possible we are dealing with a single buffer implementation, + thus if there is data available for read or if there is even a read + already in progress, we do nothing but awake the kernel thread to + process the data if necessary. */ if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) goto exitnowrite; if (status & (STATUSREG_DA | STATUSREG_RE)) { + if (status & STATUSREG_DA) + dvb_ca_en50221_thread_wakeup(ca); + status = -EAGAIN; goto exitnowrite; } @@ -987,6 +996,8 @@ static int dvb_ca_en50221_thread(void *data) /* go through all the slots processing them */ for (slot = 0; slot < ca->slot_count; slot++) { + mutex_lock(&ca->slot_info[slot].slot_lock); + // check the cam status + deal with CAMCHANGEs while (dvb_ca_en50221_check_camstatus(ca, slot)) { /* clear down an old CI slot if necessary */ @@ -1122,7 +1133,7 @@ static int dvb_ca_en50221_thread(void *data) case DVB_CA_SLOTSTATE_RUNNING: if (!ca->open) - continue; + break; // poll slots for data pktcount = 0; @@ -1146,6 +1157,8 @@ static int dvb_ca_en50221_thread(void *data) } break; } + + mutex_unlock(&ca->slot_info[slot].slot_lock); } } @@ -1181,6 +1194,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file, switch (cmd) { case CA_RESET: for (slot = 0; slot < ca->slot_count; slot++) { + mutex_lock(&ca->slot_info[slot].slot_lock); if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) { dvb_ca_en50221_slot_shutdown(ca, slot); if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) @@ -1188,6 +1202,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file, slot, DVB_CA_EN50221_CAMCHANGE_INSERTED); } + mutex_unlock(&ca->slot_info[slot].slot_lock); } ca->next_read_slot = 0; dvb_ca_en50221_thread_wakeup(ca); @@ -1308,7 +1323,9 @@ static ssize_t dvb_ca_en50221_io_write(struct file *file, goto exit; } + mutex_lock(&ca->slot_info[slot].slot_lock); status = dvb_ca_en50221_write_data(ca, slot, fragbuf, fraglen + 2); + mutex_unlock(&ca->slot_info[slot].slot_lock); if (status == (fraglen + 2)) { written = 1; break; @@ -1664,6 +1681,7 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE; atomic_set(&ca->slot_info[i].camchange_count, 0); ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED; + mutex_init(&ca->slot_info[i].slot_lock); } if (signal_pending(current)) { diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h b/drivers/media/dvb/dvb-core/dvb_ca_en50221.h index 8467e63..7df2e14 100644 --- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.h +++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.h @@ -45,8 +45,10 @@ struct dvb_ca_en50221 { /* the module owning this structure */ struct module* owner; - /* NOTE: the read_*, write_* and poll_slot_status functions must use locks as - * they may be called from several threads at once */ + /* NOTE: the read_*, write_* and poll_slot_status functions will be + * called for different slots concurrently and need to use locks where + * and if appropriate. There will be no concurrent access to one slot. + */ /* functions for accessing attribute memory on the CAM */ int (*read_attribute_mem)(struct dvb_ca_en50221* ca, int slot, int address); diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/dvb/dvb-usb/af9005-fe.c index b1a9c4c..199ece0 100644 --- a/drivers/media/dvb/dvb-usb/af9005-fe.c +++ b/drivers/media/dvb/dvb-usb/af9005-fe.c @@ -220,7 +220,7 @@ static int af9005_get_post_vit_ber(struct dvb_frontend *fe, u16 * abort_count) { u32 loc_cw_count = 0, loc_err_count; - u16 loc_abort_count; + u16 loc_abort_count = 0; int ret; ret = diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index e1e9aa5..6a97a40 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -694,7 +694,12 @@ static int af9015_read_config(struct usb_device *udev) /* IR remote controller */ req.addr = AF9015_EEPROM_IR_MODE; - ret = af9015_rw_udev(udev, &req); + /* first message will timeout often due to possible hw bug */ + for (i = 0; i < 4; i++) { + ret = af9015_rw_udev(udev, &req); + if (!ret) + break; + } if (ret) goto error; deb_info("%s: IR mode:%d\n", __func__, val); @@ -835,18 +840,19 @@ static int af9015_read_config(struct usb_device *udev) if (!dvb_usb_af9015_dual_mode) af9015_config.dual_mode = 0; - /* set buffer size according to USB port speed */ + /* Set adapter0 buffer size according to USB port speed, adapter1 buffer + size can be static because it is enabled only USB2.0 */ for (i = 0; i < af9015_properties_count; i++) { /* USB1.1 set smaller buffersize and disable 2nd adapter */ if (udev->speed == USB_SPEED_FULL) { - af9015_properties[i].adapter->stream.u.bulk.buffersize = - TS_USB11_MAX_PACKET_SIZE; + af9015_properties[i].adapter[0].stream.u.bulk.buffersize + = TS_USB11_MAX_PACKET_SIZE; /* disable 2nd adapter because we don't have PID-filters */ af9015_config.dual_mode = 0; } else { - af9015_properties[i].adapter->stream.u.bulk.buffersize = - TS_USB20_MAX_PACKET_SIZE; + af9015_properties[i].adapter[0].stream.u.bulk.buffersize + = TS_USB20_MAX_PACKET_SIZE; } } @@ -1254,6 +1260,12 @@ static struct dvb_usb_device_properties af9015_properties[] = { .type = USB_BULK, .count = 6, .endpoint = 0x85, + .u = { + .bulk = { + .buffersize = + TS_USB20_MAX_PACKET_SIZE, + } + } }, } }, @@ -1353,6 +1365,12 @@ static struct dvb_usb_device_properties af9015_properties[] = { .type = USB_BULK, .count = 6, .endpoint = 0x85, + .u = { + .bulk = { + .buffersize = + TS_USB20_MAX_PACKET_SIZE, + } + } }, } }, diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 3917327..635d30a 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1393,6 +1393,9 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) }, + { USB_DEVICE(USB_VID_TERRATEC, + USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1537,7 +1540,8 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "DiBcom STK7700D reference design", { &dib0700_usb_id_table[14], NULL }, { NULL }, - } + }, + }, .rc_interval = DEFAULT_RC_INTERVAL, @@ -1557,7 +1561,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 2, + .num_device_descs = 3, .devices = { { "ASUS My Cinema U3000 Mini DVBT Tuner", { &dib0700_usb_id_table[23], NULL }, @@ -1566,6 +1570,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "Yuan EC372S", { &dib0700_usb_id_table[31], NULL }, { NULL }, + }, + { "Terratec Cinergy T Express", + { &dib0700_usb_id_table[42], NULL }, + { NULL }, } }, @@ -1653,7 +1661,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { } }, - .num_device_descs = 4, + .num_device_descs = 5, .devices = { { "DiBcom STK7070PD reference design", { &dib0700_usb_id_table[17], NULL }, @@ -1670,6 +1678,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "Hauppauge Nova-TD-500 (84xxx)", { &dib0700_usb_id_table[36], NULL }, { NULL }, + }, + { "Terratec Cinergy DT USB XS Diversity", + { &dib0700_usb_id_table[43], NULL }, + { NULL }, } } }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index a4fca3f..0db0c06 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -162,8 +162,10 @@ #define USB_PID_AVERMEDIA_A309 0xa309 #define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a +#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2 0x0081 #define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS 0x0060 +#define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062 #define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078 #define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e #define USB_PID_PINNACLE_PCTV2000E 0x022c diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c index ec4e08d..1e81e71 100644 --- a/drivers/media/dvb/frontends/drx397xD.c +++ b/drivers/media/dvb/frontends/drx397xD.c @@ -646,7 +646,7 @@ static int drx_tune(struct drx397xD_state *s, u32 edi = 0, ebx = 0, ebp = 0, edx = 0; u16 v20 = 0, v1E = 0, v16 = 0, v14 = 0, v12 = 0, v10 = 0, v0E = 0; - int rc, df_tuner; + int rc, df_tuner = 0; int a, b, c, d; pr_debug("%s %d\n", __func__, s->config.d60); diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index cf4d893..3e08d98 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -545,9 +545,6 @@ static int s5h1409_set_frontend(struct dvb_frontend *fe, s5h1409_enable_modulation(fe, p->u.vsb.modulation); - /* Allow the demod to settle */ - msleep(100); - if (fe->ops.tuner_ops.set_params) { if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); @@ -562,6 +559,10 @@ static int s5h1409_set_frontend(struct dvb_frontend *fe, s5h1409_set_qam_interleave_mode(fe); } + /* Issue a reset to the demod so it knows to resync against the + newly tuned frequency */ + s5h1409_softreset(fe); + return 0; } diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c index 83dc7e1..a67d177 100644 --- a/drivers/media/dvb/frontends/stb0899_algo.c +++ b/drivers/media/dvb/frontends/stb0899_algo.c @@ -31,6 +31,8 @@ inline u32 stb0899_do_div(u64 n, u32 d) return n; } +#if 0 +/* These functions are currently unused */ /* * stb0899_calc_srate * Compute symbol rate @@ -63,6 +65,7 @@ static u32 stb0899_get_srate(struct stb0899_state *state) return stb0899_calc_srate(internal->master_clk, sfr); } +#endif /* * stb0899_set_srate diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 1638e1d..83e9e77 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -470,6 +470,7 @@ static void frontend_init(struct budget *budget) budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap); if (budget->dvb_frontend) { budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; + budget->dvb_frontend->tuner_priv = NULL; break; } break; diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index 0aa96df..d91e063 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1384,7 +1384,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) static int ttusb_dec_init_stb(struct ttusb_dec *dec) { int result; - unsigned int mode, model, version; + unsigned int mode = 0, model = 0, version = 0; dprintk("%s\n", __func__); diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index 0747dc8..fdfc7bf 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -194,10 +194,10 @@ static int amradio_start(struct amradio_device *radio) return retval; } - mutex_unlock(&radio->lock); - radio->muted = 0; + mutex_unlock(&radio->lock); + return retval; } @@ -230,10 +230,10 @@ static int amradio_stop(struct amradio_device *radio) return retval; } - mutex_unlock(&radio->lock); - radio->muted = 1; + mutex_unlock(&radio->lock); + return retval; } @@ -284,10 +284,10 @@ static int amradio_setfreq(struct amradio_device *radio, int freq) return retval; } - mutex_unlock(&radio->lock); - radio->stereo = 0; + mutex_unlock(&radio->lock); + return retval; } diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c index 14bebf8..87e9107 100644 --- a/drivers/media/video/cs5345.c +++ b/drivers/media/video/cs5345.c @@ -18,7 +18,6 @@ */ -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/i2c.h> diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 8f1db57..bfe2584 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -1586,7 +1586,8 @@ static int mpeg_open(struct file *file) lock_kernel(); list_for_each(list, &cx23885_devlist) { h = list_entry(list, struct cx23885_dev, devlist); - if (h->v4l_device->minor == minor) { + if (h->v4l_device && + h->v4l_device->minor == minor) { dev = h; break; } diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 2d81c4d..eaa1189 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -730,12 +730,13 @@ static int video_open(struct file *file) lock_kernel(); list_for_each(list, &cx23885_devlist) { h = list_entry(list, struct cx23885_dev, devlist); - if (h->video_dev->minor == minor) { + if (h->video_dev && + h->video_dev->minor == minor) { dev = h; type = V4L2_BUF_TYPE_VIDEO_CAPTURE; } if (h->vbi_dev && - h->vbi_dev->minor == minor) { + h->vbi_dev->minor == minor) { dev = h; type = V4L2_BUF_TYPE_VBI_CAPTURE; } diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 88f2fd3..25eb3bec 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -1382,6 +1382,14 @@ static int cx25840_log_status(struct v4l2_subdev *sd) static int cx25840_command(struct i2c_client *client, unsigned cmd, void *arg) { + /* ignore this command */ + if (cmd == TUNER_SET_TYPE_ADDR || cmd == TUNER_SET_CONFIG) + return 0; + + /* Old-style drivers rely on initialization on first use, so + call the init whenever a command is issued to this driver. + New-style drivers using v4l2_subdev should call init explicitly. */ + cx25840_init(i2c_get_clientdata(client), 0); return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg); } diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 613dfea..aef5297 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -614,34 +614,41 @@ static struct stv0288_config tevii_tuner_earda_config = { .set_ts_params = cx24116_set_ts_param, }; -static int dvb_register(struct cx8802_dev *dev) +static int cx8802_alloc_frontends(struct cx8802_dev *dev) { struct cx88_core *core = dev->core; - struct videobuf_dvb_frontend *fe0, *fe1 = NULL; - int mfe_shared = 0; /* bus not shared by default */ + struct videobuf_dvb_frontend *fe = NULL; int i; - if (0 != core->i2c_rc) { - printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); - goto frontend_detach; - } - - if (!core->board.num_frontends) - return -EINVAL; - mutex_init(&dev->frontends.lock); INIT_LIST_HEAD(&dev->frontends.felist); + if (!core->board.num_frontends) + return -ENODEV; + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends); for (i = 1; i <= core->board.num_frontends; i++) { - fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, i); - if (!fe0) { + fe = videobuf_dvb_alloc_frontend(&dev->frontends, i); + if (!fe) { printk(KERN_ERR "%s() failed to alloc\n", __func__); videobuf_dvb_dealloc_frontends(&dev->frontends); - goto frontend_detach; + return -ENOMEM; } } + return 0; +} + +static int dvb_register(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + struct videobuf_dvb_frontend *fe0, *fe1 = NULL; + int mfe_shared = 0; /* bus not shared by default */ + + if (0 != core->i2c_rc) { + printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); + goto frontend_detach; + } /* Get the first frontend */ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); @@ -1243,6 +1250,8 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) struct cx88_core *core = drv->core; struct cx8802_dev *dev = drv->core->dvbdev; int err; + struct videobuf_dvb_frontend *fe; + int i; dprintk( 1, "%s\n", __func__); dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", @@ -1258,39 +1267,34 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) /* If vp3054 isn't enabled, a stub will just return 0 */ err = vp3054_i2c_probe(dev); if (0 != err) - goto fail_probe; + goto fail_core; /* dvb stuff */ printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name); dev->ts_gen_cntrl = 0x0c; + err = cx8802_alloc_frontends(dev); + if (err) + goto fail_core; + err = -ENODEV; - if (core->board.num_frontends) { - struct videobuf_dvb_frontend *fe; - int i; - - for (i = 1; i <= core->board.num_frontends; i++) { - fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i); - if (fe == NULL) { - printk(KERN_ERR "%s() failed to get frontend(%d)\n", + for (i = 1; i <= core->board.num_frontends; i++) { + fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i); + if (fe == NULL) { + printk(KERN_ERR "%s() failed to get frontend(%d)\n", __func__, i); - goto fail_probe; - } - videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops, + goto fail_probe; + } + videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops, &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP, sizeof(struct cx88_buffer), dev); - /* init struct videobuf_dvb */ - fe->dvb.name = dev->core->name; - } - } else { - /* no frontends allocated */ - printk(KERN_ERR "%s/2 .num_frontends should be non-zero\n", - core->name); - goto fail_core; + /* init struct videobuf_dvb */ + fe->dvb.name = dev->core->name; } + err = dvb_register(dev); if (err) /* frontends/adapter de-allocated in dvb_register */ diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 60a8b31..6025fdd 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -336,8 +336,8 @@ struct cx88_core { /* config info -- dvb */ #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) int (*prev_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); - void (*gate_ctrl)(struct cx88_core *core, int open); #endif + void (*gate_ctrl)(struct cx88_core *core, int open); /* state info */ struct task_struct *kthread; diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 94378cc..5d882a4 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -62,9 +62,15 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev) dprintk("Stopping isoc\n"); for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { - usb_unlink_urb(dev->adev.urb[i]); + if (!irqs_disabled()) + usb_kill_urb(dev->adev.urb[i]); + else + usb_unlink_urb(dev->adev.urb[i]); usb_free_urb(dev->adev.urb[i]); dev->adev.urb[i] = NULL; + + kfree(dev->adev.transfer_buffer[i]); + dev->adev.transfer_buffer[i] = NULL; } return 0; @@ -389,11 +395,15 @@ static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream, static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream *substream) { - struct em28xx *dev; + unsigned long flags; + struct em28xx *dev; snd_pcm_uframes_t hwptr_done; + dev = snd_pcm_substream_chip(substream); + spin_lock_irqsave(&dev->adev.slock, flags); hwptr_done = dev->adev.hwptr_done_capture; + spin_unlock_irqrestore(&dev->adev.slock, flags); return hwptr_done; } diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index ef9bf00..3b3ca3f 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -102,6 +102,18 @@ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { /* Board - EM2870 Kworld 355u Analog - No input analog */ +static struct em28xx_reg_seq kworld_330u_analog[] = { + {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x00, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq kworld_330u_digital[] = { + {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x08, 0xff, 10}, + { -1, -1, -1, -1}, +}; + /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, @@ -1177,29 +1189,33 @@ struct em28xx_board em28xx_boards[] = { .gpio = hauppauge_wintv_hvr_900_analog, } }, }, - [EM2883_BOARD_KWORLD_HYBRID_A316] = { + [EM2883_BOARD_KWORLD_HYBRID_330U] = { .name = "Kworld PlusTV HD Hybrid 330", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .mts_firmware = 1, .has_dvb = 1, - .dvb_gpio = default_digital, + .dvb_gpio = kworld_330u_digital, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_EEPROM_ON_BOARD | EM28XX_I2C_EEPROM_KEY_VALID, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, - .gpio = default_analog, + .gpio = kworld_330u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, - .gpio = hauppauge_wintv_hvr_900_analog, + .gpio = kworld_330u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, - .gpio = hauppauge_wintv_hvr_900_analog, + .gpio = kworld_330u_analog, } }, }, [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { @@ -1249,7 +1265,7 @@ struct usb_device_id em28xx_id_table [] = { { USB_DEVICE(0xeb1a, 0xe310), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, { USB_DEVICE(0xeb1a, 0xa316), - .driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 }, + .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, { USB_DEVICE(0xeb1a, 0xe320), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, { USB_DEVICE(0xeb1a, 0xe323), @@ -1526,6 +1542,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) /* FIXME: Better to specify the needed IF */ ctl->demod = XC3028_FE_DEFAULT; break; + case EM2883_BOARD_KWORLD_HYBRID_330U: + ctl->demod = XC3028_FE_CHINA; + ctl->fname = XC2028_DEFAULT_FIRMWARE; + break; default: ctl->demod = XC3028_FE_OREN538; } diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index eb5fb05..94fb1b6 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -438,6 +438,10 @@ int em28xx_audio_analog_set(struct em28xx *dev) if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { int vol; + em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); + em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); + em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); + /* LSB: left channel - both channels with the same level */ vol = (0x1f - dev->volume) | ((0x1f - dev->volume) << 8); @@ -454,6 +458,15 @@ int em28xx_audio_analog_set(struct em28xx *dev) em28xx_warn("couldn't setup AC97 register %d\n", outputs[i].reg); } + + if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) { + int sel = ac97_return_record_select(dev->ctl_aoutput); + + /* Use the same input for both left and right channels */ + sel |= (sel << 8); + + em28xx_write_ac97(dev, AC97_RECORD_SELECT, sel); + } } return ret; @@ -847,8 +860,11 @@ void em28xx_uninit_isoc(struct em28xx *dev) for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { urb = dev->isoc_ctl.urb[i]; if (urb) { - usb_kill_urb(urb); - usb_unlink_urb(urb); + if (!irqs_disabled()) + usb_kill_urb(urb); + else + usb_unlink_urb(urb); + if (dev->isoc_ctl.transfer_buffer[i]) { usb_buffer_free(dev->udev, urb->transfer_buffer_length, diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index d38cb21..9ad8527 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -28,6 +28,7 @@ #include "lgdt330x.h" #include "zl10353.h" +#include "s5h1409.h" #ifdef EM28XX_DRX397XD_SUPPORT #include "drx397xD.h" #endif @@ -232,6 +233,15 @@ static struct zl10353_config em28xx_zl10353_with_xc3028 = { .if2 = 45600, }; +static struct s5h1409_config em28xx_s5h1409_with_xc3028 = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_PARALLEL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK +}; + #ifdef EM28XX_DRX397XD_SUPPORT /* [TODO] djh - not sure yet what the device config needs to contain */ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { @@ -412,7 +422,6 @@ static int dvb_init(struct em28xx *dev) case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: - case EM2883_BOARD_KWORLD_HYBRID_A316: case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: dvb->frontend = dvb_attach(lgdt330x_attach, &em2880_lgdt3303_dev, @@ -433,6 +442,15 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2883_BOARD_KWORLD_HYBRID_330U: + dvb->frontend = dvb_attach(s5h1409_attach, + &em28xx_s5h1409_with_xc3028, + &dev->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: #ifdef EM28XX_DRX397XD_SUPPORT /* We don't have the config structure properly populated, so diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 416b691..8e61b2c 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -886,10 +886,10 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) if (0 == INPUT(i)->type) return -EINVAL; - mutex_lock(&dev->lock); - - video_mux(dev, i); + dev->ctl_input = i; + mutex_lock(&dev->lock); + video_mux(dev, dev->ctl_input); mutex_unlock(&dev->lock); return 0; } @@ -939,6 +939,12 @@ static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; + + if (a->index >= MAX_EM28XX_INPUT) + return -EINVAL; + if (0 == INPUT(a->index)->type) + return -EINVAL; + mutex_lock(&dev->lock); dev->ctl_ainput = INPUT(a->index)->amux; @@ -1950,6 +1956,7 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev, int em28xx_register_analog_devices(struct em28xx *dev) { + u8 val; int ret; printk(KERN_INFO "%s: v4l2 driver version %d.%d.%d\n", @@ -1957,34 +1964,34 @@ int em28xx_register_analog_devices(struct em28xx *dev) (EM28XX_VERSION_CODE >> 16) & 0xff, (EM28XX_VERSION_CODE >> 8) & 0xff, EM28XX_VERSION_CODE & 0xff); + /* set default norm */ + dev->norm = em28xx_video_template.current_norm; + dev->width = norm_maxw(dev); + dev->height = norm_maxh(dev); + dev->interlaced = EM28XX_INTERLACED_DEFAULT; + dev->hscale = 0; + dev->vscale = 0; + dev->ctl_input = 0; + /* Analog specific initialization */ dev->format = &format[0]; - video_mux(dev, 0); + video_mux(dev, dev->ctl_input); + + /* Audio defaults */ + dev->mute = 1; + dev->volume = 0x1f; /* enable vbi capturing */ /* em28xx_write_reg(dev, EM28XX_R0E_AUDIOSRC, 0xc0); audio register */ -/* em28xx_write_reg(dev, EM28XX_R0F_XCLK, 0x80); clk register */ + val = (u8)em28xx_read_reg(dev, EM28XX_R0F_XCLK); + em28xx_write_reg(dev, EM28XX_R0F_XCLK, (EM28XX_XCLK_AUDIO_UNMUTE | val)); em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51); - dev->mute = 1; /* maybe not the right place... */ - dev->volume = 0x1f; - em28xx_set_outfmt(dev); em28xx_colorlevels_set_default(dev); em28xx_compression_disable(dev); - /* set default norm */ - dev->norm = em28xx_video_template.current_norm; - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); - dev->interlaced = EM28XX_INTERLACED_DEFAULT; - dev->hscale = 0; - dev->vscale = 0; - - /* FIXME: This is a very bad hack! Not all devices have TV on input 2 */ - dev->ctl_input = 2; - /* allocate and fill video video_device struct */ dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video"); if (!dev->vdev) { diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 6c6b94a..dd2cd36 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -94,7 +94,7 @@ #define EM2882_BOARD_KWORLD_VS_DVBT 54 #define EM2882_BOARD_TERRATEC_HYBRID_XS 55 #define EM2882_BOARD_PINNACLE_HYBRID_PRO 56 -#define EM2883_BOARD_KWORLD_HYBRID_A316 57 +#define EM2883_BOARD_KWORLD_HYBRID_330U 57 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 60 #define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2 61 @@ -300,13 +300,32 @@ enum em28xx_amux { }; enum em28xx_aout { + /* AC97 outputs */ EM28XX_AOUT_MASTER = 1 << 0, EM28XX_AOUT_LINE = 1 << 1, EM28XX_AOUT_MONO = 1 << 2, EM28XX_AOUT_LFE = 1 << 3, EM28XX_AOUT_SURR = 1 << 4, + + /* PCM IN Mixer - used by AC97_RECORD_SELECT register */ + EM28XX_AOUT_PCM_IN = 1 << 7, + + /* Bits 10-8 are used to indicate the PCM IN record select */ + EM28XX_AOUT_PCM_MIC_PCM = 0 << 8, + EM28XX_AOUT_PCM_CD = 1 << 8, + EM28XX_AOUT_PCM_VIDEO = 2 << 8, + EM28XX_AOUT_PCM_AUX = 3 << 8, + EM28XX_AOUT_PCM_LINE = 4 << 8, + EM28XX_AOUT_PCM_STEREO = 5 << 8, + EM28XX_AOUT_PCM_MONO = 6 << 8, + EM28XX_AOUT_PCM_PHONE = 7 << 8, }; +static inline int ac97_return_record_select(int a_out) +{ + return (a_out & 0x700) >> 8; +} + struct em28xx_reg_seq { int reg; unsigned char val, mask; diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 5e36b9a..2ed2452 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -423,7 +423,8 @@ static void destroy_urbs(struct gspca_dev *gspca_dev) break; gspca_dev->urb[i] = NULL; - usb_kill_urb(urb); + if (!gspca_dev->present) + usb_kill_urb(urb); if (urb->transfer_buffer != NULL) usb_buffer_free(gspca_dev->dev, urb->transfer_buffer_length, @@ -1950,7 +1951,6 @@ void gspca_disconnect(struct usb_interface *intf) struct gspca_dev *gspca_dev = usb_get_intfdata(intf); gspca_dev->present = 0; - gspca_dev->streaming = 0; usb_set_intfdata(intf, NULL); diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index e8e5921..c46c990 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -949,8 +949,10 @@ static int __devinit ivtv_probe(struct pci_dev *dev, itv->instance = atomic_inc_return(&ivtv_instance) - 1; retval = v4l2_device_register(&dev->dev, &itv->device); - if (retval) + if (retval) { + kfree(itv); return retval; + } /* "ivtv + PCI ID" is a bit of a mouthful, so use "ivtv + instance" instead. */ snprintf(itv->device.name, sizeof(itv->device.name), diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 39fbc97..0d81018 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -62,7 +62,6 @@ #include <linux/poll.h> #include <linux/slab.h> #include <linux/vmalloc.h> -#include <linux/version.h> #include <asm/io.h> #include "pwc.h" diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c index d6848f7..05221d4 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/video/saa7127.c @@ -149,7 +149,7 @@ static const struct i2c_reg_value saa7127_init_config_common[] = { { SAA7127_REG_COPYGEN_0, 0x77 }, { SAA7127_REG_COPYGEN_1, 0x41 }, { SAA7127_REG_COPYGEN_2, 0x00 }, /* Macrovision enable/disable */ - { SAA7127_REG_OUTPUT_PORT_CONTROL, 0x9e }, + { SAA7127_REG_OUTPUT_PORT_CONTROL, 0xbf }, { SAA7127_REG_GAIN_LUMINANCE_RGB, 0x00 }, { SAA7127_REG_GAIN_COLORDIFF_RGB, 0x00 }, { SAA7127_REG_INPUT_PORT_CONTROL_1, 0x80 }, /* for color bars */ @@ -488,12 +488,18 @@ static int saa7127_set_output_type(struct v4l2_subdev *sd, int output) break; case SAA7127_OUTPUT_TYPE_COMPOSITE: - state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */ + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x20; /* CVBS only */ + else + state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */ state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ break; case SAA7127_OUTPUT_TYPE_SVIDEO: - state->reg_2d = 0xff; /* 11111111 croma -> R, luma -> CVBS + G + B */ + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x18; /* Y + C */ + else + state->reg_2d = 0xff; /*11111111 croma -> R, luma -> CVBS + G + B */ state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ break; @@ -508,7 +514,10 @@ static int saa7127_set_output_type(struct v4l2_subdev *sd, int output) break; case SAA7127_OUTPUT_TYPE_BOTH: - state->reg_2d = 0xbf; + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x38; + else + state->reg_2d = 0xbf; state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ break; @@ -731,24 +740,6 @@ static int saa7127_probe(struct i2c_client *client, return -ENODEV; } - /* Configure Encoder */ - - v4l2_dbg(1, debug, sd, "Configuring encoder\n"); - saa7127_write_inittab(sd, saa7127_init_config_common); - saa7127_set_std(sd, V4L2_STD_NTSC); - saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH); - saa7127_set_vps(sd, &vbi); - saa7127_set_wss(sd, &vbi); - saa7127_set_cc(sd, &vbi); - saa7127_set_xds(sd, &vbi); - if (test_image == 1) - /* The Encoder has an internal Colorbar generator */ - /* This can be used for debugging */ - saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE); - else - saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL); - saa7127_set_video_enable(sd, 1); - if (id->driver_data) { /* Chip type is already known */ state->ident = id->driver_data; } else { /* Needs detection */ @@ -770,6 +761,23 @@ static int saa7127_probe(struct i2c_client *client, v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, client->addr << 1, client->adapter->name); + + v4l2_dbg(1, debug, sd, "Configuring encoder\n"); + saa7127_write_inittab(sd, saa7127_init_config_common); + saa7127_set_std(sd, V4L2_STD_NTSC); + saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH); + saa7127_set_vps(sd, &vbi); + saa7127_set_wss(sd, &vbi); + saa7127_set_cc(sd, &vbi); + saa7127_set_xds(sd, &vbi); + if (test_image == 1) + /* The Encoder has an internal Colorbar generator */ + /* This can be used for debugging */ + saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE); + else + saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL); + saa7127_set_video_enable(sd, 1); + if (state->ident == V4L2_IDENT_SAA7129) saa7127_write_inittab(sd, saa7129_init_config_extra); return 0; diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index 26194a0..c750d3d 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -1089,7 +1089,11 @@ static int saa7134_alsa_init(void) list_for_each(list,&saa7134_devlist) { dev = list_entry(list, struct saa7134_dev, devlist); - alsa_device_init(dev); + if (dev->pci->device == PCI_DEVICE_ID_PHILIPS_SAA7130) + printk(KERN_INFO "%s/alsa: %s doesn't support digital audio\n", + dev->name, saa7134_boards[dev->board].name); + else + alsa_device_init(dev); } if (dev == NULL) diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index dfbe08a..99221d7 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -660,6 +660,10 @@ static int saa7134_hwinit1(struct saa7134_dev *dev) saa_writel(SAA7134_IRQ1, 0); saa_writel(SAA7134_IRQ2, 0); + + /* Clear any stale IRQ reports */ + saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT)); + mutex_init(&dev->lock); spin_lock_init(&dev->slock); diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c index 454ad1d..88c5e94 100644 --- a/drivers/media/video/saa717x.c +++ b/drivers/media/video/saa717x.c @@ -30,7 +30,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/sched.h> diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c index 56f0c0e..00c6cbe 100644 --- a/drivers/media/video/tda9875.c +++ b/drivers/media/video/tda9875.c @@ -242,7 +242,7 @@ static int tda9875_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) static int tda9875_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) { struct tda9875 *t = to_state(sd); - int chvol=0, volume, balance, left, right; + int chvol = 0, volume = 0, balance = 0, left, right; switch (ctrl->id) { case V4L2_CID_AUDIO_VOLUME: diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 3b0b84c..78277ab 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -427,6 +427,9 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, const char *t_fmt_name2[8] = { " none", "", "", "", "", "", "", "" }; memset(tvee, 0, sizeof(*tvee)); + tvee->tuner_type = TUNER_ABSENT; + tvee->tuner2_type = TUNER_ABSENT; + done = len = beenhere = 0; /* Different eeprom start offsets for em28xx, cx2388x and cx23418 */ diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c index ac9aa40..8e23aa5 100644 --- a/drivers/media/video/tvp514x.c +++ b/drivers/media/video/tvp514x.c @@ -1401,7 +1401,7 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) decoder->pdata = client->dev.platform_data; if (!decoder->pdata) { - v4l_err(client, "No platform data\n!!"); + v4l_err(client, "No platform data!!\n"); return -ENODEV; } /* diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c index 4f16eff..f4522bb 100644 --- a/drivers/media/video/upd64031a.c +++ b/drivers/media/video/upd64031a.c @@ -21,7 +21,6 @@ */ -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/i2c.h> diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c index 4b712f6..a5fb74b 100644 --- a/drivers/media/video/upd64083.c +++ b/drivers/media/video/upd64083.c @@ -21,7 +21,6 @@ * 02110-1301, USA. */ -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/i2c.h> diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index 9907b9a..6b66ae4 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -157,7 +157,7 @@ usbvision_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) struct i2c_msg *pmsg; struct usb_usbvision *usbvision; int i, ret; - unsigned char addr; + unsigned char addr = 0; usbvision = (struct usb_usbvision *)i2c_get_adapdata(i2c_adap); diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 2208165..d2576f6 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -1,7 +1,7 @@ /* * uvc_ctrl.c -- USB Video Class driver - Controls * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -12,7 +12,6 @@ */ #include <linux/kernel.h> -#include <linux/version.h> #include <linux/list.h> #include <linux/module.h> #include <linux/uaccess.h> @@ -29,7 +28,7 @@ #define UVC_CTRL_DATA_BACKUP 1 /* ------------------------------------------------------------------------ - * Control, formats, ... + * Controls */ static struct uvc_control_info uvc_ctrls[] = { @@ -635,7 +634,7 @@ static __s32 uvc_get_le_value(struct uvc_control_mapping *mapping, mask = (1 << bits) - 1; } - /* Sign-extend the value if needed */ + /* Sign-extend the value if needed. */ if (mapping->data_type == UVC_CTRL_DATA_TYPE_SIGNED) value |= -(value & (1 << (mapping->size - 1))); diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 89d8bd1..b128732 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1,7 +1,7 @@ /* * uvc_driver.c -- USB Video Class driver * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -24,7 +24,6 @@ */ #include <linux/kernel.h> -#include <linux/version.h> #include <linux/list.h> #include <linux/module.h> #include <linux/usb.h> @@ -49,7 +48,7 @@ static unsigned int uvc_quirks_param; unsigned int uvc_trace_param; /* ------------------------------------------------------------------------ - * Control, formats, ... + * Video formats */ static struct uvc_format_desc uvc_fmts[] = { @@ -474,7 +473,7 @@ static int uvc_parse_format(struct uvc_device *dev, /* Several UVC chipsets screw up dwMaxVideoFrameBufferSize * completely. Observed behaviours range from setting the - * value to 1.1x the actual frame size of hardwiring the + * value to 1.1x the actual frame size to hardwiring the * 16 low bits to 0. This results in a higher than necessary * memory usage as well as a wrong image size information. For * uncompressed formats this can be fixed by computing the @@ -487,7 +486,7 @@ static int uvc_parse_format(struct uvc_device *dev, /* Some bogus devices report dwMinFrameInterval equal to * dwMaxFrameInterval and have dwFrameIntervalStep set to * zero. Setting all null intervals to 1 fixes the problem and - * some other divisions by zero which could happen. + * some other divisions by zero that could happen. */ for (i = 0; i < n; ++i) { interval = get_unaligned_le32(&buffer[26+4*i]); @@ -1200,13 +1199,13 @@ static void uvc_unregister_video(struct uvc_device *dev) * Scan the UVC descriptors to locate a chain starting at an Output Terminal * and containing the following units: * - * - a USB Streaming Output Terminal + * - one Output Terminal (USB Streaming or Display) * - zero or one Processing Unit * - zero, one or mode single-input Selector Units * - zero or one multiple-input Selector Units, provided all inputs are * connected to input terminals * - zero, one or mode single-input Extension Units - * - one Camera Input Terminal, or one or more External terminals. + * - one or more Input Terminals (Camera, External or USB Streaming) * * A side forward scan is made on each detected entity to check for additional * extension units. @@ -1531,10 +1530,6 @@ static int uvc_register_video(struct uvc_device *dev) /* Set the driver data before calling video_register_device, otherwise * uvc_v4l2_open might race us. - * - * FIXME: usb_set_intfdata hasn't been called so far. Is that a - * problem ? Does any function which could be called here get - * a pointer to the usb_interface ? */ dev->video.vdev = vdev; video_set_drvdata(vdev, &dev->video); @@ -1569,7 +1564,7 @@ void uvc_delete(struct kref *kref) struct uvc_device *dev = container_of(kref, struct uvc_device, kref); struct list_head *p, *n; - /* Unregister the video device */ + /* Unregister the video device. */ uvc_unregister_video(dev); usb_put_intf(dev->intf); usb_put_dev(dev->udev); @@ -1612,7 +1607,7 @@ static int uvc_probe(struct usb_interface *intf, uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n", udev->devpath); - /* Allocate memory for the device and initialize it */ + /* Allocate memory for the device and initialize it. */ if ((dev = kzalloc(sizeof *dev, GFP_KERNEL)) == NULL) return -ENOMEM; @@ -1633,14 +1628,14 @@ static int uvc_probe(struct usb_interface *intf, le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct)); - /* Parse the Video Class control descriptor */ + /* Parse the Video Class control descriptor. */ if (uvc_parse_control(dev) < 0) { uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC " "descriptors.\n"); goto error; } - uvc_printk(KERN_INFO, "Found UVC %u.%02u device %s (%04x:%04x)\n", + uvc_printk(KERN_INFO, "Found UVC %u.%02x device %s (%04x:%04x)\n", dev->uvc_version >> 8, dev->uvc_version & 0xff, udev->product ? udev->product : "<unnamed>", le16_to_cpu(udev->descriptor.idVendor), @@ -1653,18 +1648,18 @@ static int uvc_probe(struct usb_interface *intf, "linux-uvc-devel mailing list.\n"); } - /* Initialize controls */ + /* Initialize controls. */ if (uvc_ctrl_init_device(dev) < 0) goto error; - /* Register the video devices */ + /* Register the video devices. */ if (uvc_register_video(dev) < 0) goto error; - /* Save our data pointer in the interface data */ + /* Save our data pointer in the interface data. */ usb_set_intfdata(intf, dev); - /* Initialize the interrupt URB */ + /* Initialize the interrupt URB. */ if ((ret = uvc_status_init(dev)) < 0) { uvc_printk(KERN_INFO, "Unable to initialize the status " "endpoint (%d), status interrupt will not be " @@ -1839,24 +1834,24 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0 }, /* Apple Built-In iSight */ - { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x05ac, .idProduct = 0x8501, - .bInterfaceClass = USB_CLASS_VIDEO, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 0, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX | UVC_QUIRK_BUILTIN_ISIGHT }, /* Genesys Logic USB 2.0 PC Camera */ - { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x05e3, - .idProduct = 0x0505, - .bInterfaceClass = USB_CLASS_VIDEO, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 0, - .driver_info = UVC_QUIRK_STREAM_NO_FID }, + .idVendor = 0x05e3, + .idProduct = 0x0505, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, /* MT6227 */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, diff --git a/drivers/media/video/uvc/uvc_isight.c b/drivers/media/video/uvc/uvc_isight.c index 37bdefd..436f462 100644 --- a/drivers/media/video/uvc/uvc_isight.c +++ b/drivers/media/video/uvc/uvc_isight.c @@ -3,6 +3,8 @@ * * Copyright (C) 2006-2007 * Ivan N. Zlatev <contact@i-nz.net> + * Copyright (C) 2008-2009 + * Laurent Pinchart <laurent.pinchart@skynet.be> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index 4254634..0155752 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -1,7 +1,7 @@ /* * uvc_queue.c -- USB Video Class driver - Buffers management * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -12,7 +12,6 @@ */ #include <linux/kernel.h> -#include <linux/version.h> #include <linux/mm.h> #include <linux/list.h> #include <linux/module.h> @@ -37,22 +36,22 @@ * to user space will return -EBUSY. * * Video buffers are managed using two queues. However, unlike most USB video - * drivers which use an in queue and an out queue, we use a main queue which - * holds all queued buffers (both 'empty' and 'done' buffers), and an irq - * queue which holds empty buffers. This design (copied from video-buf) - * minimizes locking in interrupt, as only one queue is shared between - * interrupt and user contexts. + * drivers that use an in queue and an out queue, we use a main queue to hold + * all queued buffers (both 'empty' and 'done' buffers), and an irq queue to + * hold empty buffers. This design (copied from video-buf) minimizes locking + * in interrupt, as only one queue is shared between interrupt and user + * contexts. * * Use cases * --------- * - * Unless stated otherwise, all operations which modify the irq buffers queue + * Unless stated otherwise, all operations that modify the irq buffers queue * are protected by the irq spinlock. * * 1. The user queues the buffers, starts streaming and dequeues a buffer. * * The buffers are added to the main and irq queues. Both operations are - * protected by the queue lock, and the latert is protected by the irq + * protected by the queue lock, and the later is protected by the irq * spinlock as well. * * The completion handler fetches a buffer from the irq queue and fills it @@ -60,7 +59,7 @@ * returns immediately. * * When the buffer is full, the completion handler removes it from the irq - * queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue. + * queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue. * At that point, any process waiting on the buffer will be woken up. If a * process tries to dequeue a buffer after it has been marked ready, the * dequeing will succeed immediately. @@ -91,8 +90,8 @@ void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type) /* * Allocate the video buffers. * - * Pages are reserved to make sure they will not be swaped, as they will be - * filled in URB completion handler. + * Pages are reserved to make sure they will not be swapped, as they will be + * filled in the URB completion handler. * * Buffers will be individually mapped, so they must all be page aligned. */ @@ -210,8 +209,8 @@ int uvc_query_buffer(struct uvc_video_queue *queue, __uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf); done: - mutex_unlock(&queue->mutex); - return ret; + mutex_unlock(&queue->mutex); + return ret; } /* @@ -236,7 +235,7 @@ int uvc_queue_buffer(struct uvc_video_queue *queue, } mutex_lock(&queue->mutex); - if (v4l2_buf->index >= queue->count) { + if (v4l2_buf->index >= queue->count) { uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n"); ret = -EINVAL; goto done; @@ -429,7 +428,7 @@ done: * Cancel the video buffers queue. * * Cancelling the queue marks all buffers on the irq queue as erroneous, - * wakes them up and remove them from the queue. + * wakes them up and removes them from the queue. * * If the disconnect parameter is set, further calls to uvc_queue_buffer will * fail with -ENODEV. diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c index 5d60b26..c1e4ae2 100644 --- a/drivers/media/video/uvc/uvc_status.c +++ b/drivers/media/video/uvc/uvc_status.c @@ -1,7 +1,7 @@ /* * uvc_status.c -- USB Video Class driver - Status endpoint * - * Copyright (C) 2007-2008 + * Copyright (C) 2007-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -12,7 +12,6 @@ */ #include <linux/kernel.h> -#include <linux/version.h> #include <linux/input.h> #include <linux/usb.h> #include <linux/usb/input.h> diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c index fa150ff..d681519 100644 --- a/drivers/media/video/uvc/uvc_v4l2.c +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -1,7 +1,7 @@ /* * uvc_v4l2.c -- USB Video Class driver - V4L2 API * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -37,7 +37,7 @@ * must be grouped (for instance the Red Balance, Blue Balance and Do White * Balance V4L2 controls use the White Balance Component UVC control) or * otherwise translated. The approach we take here is to use a translation - * table for the controls which can be mapped directly, and handle the others + * table for the controls that can be mapped directly, and handle the others * manually. */ static int uvc_v4l2_query_menu(struct uvc_video_device *video, @@ -189,7 +189,7 @@ static int uvc_v4l2_try_format(struct uvc_video_device *video, probe->dwMaxVideoFrameSize = video->streaming->ctrl.dwMaxVideoFrameSize; - /* Probe the device */ + /* Probe the device. */ if ((ret = uvc_probe_video(video, probe)) < 0) goto done; @@ -354,11 +354,11 @@ static int uvc_v4l2_set_streamparm(struct uvc_video_device *video, * * Each open instance of a UVC device can either be in a privileged or * unprivileged state. Only a single instance can be in a privileged state at - * a given time. Trying to perform an operation which requires privileges will + * a given time. Trying to perform an operation that requires privileges will * automatically acquire the required privileges if possible, or return -EBUSY * otherwise. Privileges are dismissed when closing the instance. * - * Operations which require privileges are: + * Operations that require privileges are: * * - VIDIOC_S_INPUT * - VIDIOC_S_PARM diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index e7c3199..9bc4705 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -1,7 +1,7 @@ /* * uvc_video.c -- USB Video Class driver - Video handling * - * Copyright (C) 2005-2008 + * Copyright (C) 2005-2009 * Laurent Pinchart (laurent.pinchart@skynet.be) * * This program is free software; you can redistribute it and/or modify @@ -12,7 +12,6 @@ */ #include <linux/kernel.h> -#include <linux/version.h> #include <linux/list.h> #include <linux/module.h> #include <linux/usb.h> @@ -115,7 +114,7 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video, ctrl->wCompQuality = le16_to_cpup((__le16 *)data); ret = 0; goto out; - } else if (query == GET_DEF && probe == 1) { + } else if (query == GET_DEF && probe == 1 && ret != size) { /* Many cameras don't support the GET_DEF request on their * video probe control. Warn once and return, the caller will * fall back to GET_CUR. @@ -160,7 +159,7 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video, } /* Some broken devices return a null or wrong dwMaxVideoFrameSize. - * Try to get the value from the format and frame descriptor. + * Try to get the value from the format and frame descriptors. */ uvc_fixup_buffer_size(video, ctrl); ret = 0; @@ -191,9 +190,6 @@ static int uvc_set_video_ctrl(struct uvc_video_device *video, *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality); *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize); *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay); - /* Note: Some of the fields below are not required for IN devices (see - * UVC spec, 4.3.1.1), but we still copy them in case support for OUT - * devices is added in the future. */ put_unaligned_le32(ctrl->dwMaxVideoFrameSize, &data[18]); put_unaligned_le32(ctrl->dwMaxPayloadTransferSize, &data[22]); @@ -400,7 +396,7 @@ static int uvc_video_decode_start(struct uvc_video_device *video, * * Empty buffers (bytesused == 0) don't trigger end of frame detection * as it doesn't make sense to return an empty buffer. This also - * avoids detecting and of frame conditions at FID toggling if the + * avoids detecting end of frame conditions at FID toggling if the * previous payload had the EOF bit set. */ if (fid != video->last_fid && buf->buf.bytesused != 0) { @@ -453,6 +449,17 @@ static void uvc_video_decode_end(struct uvc_video_device *video, } } +/* Video payload encoding is handled by uvc_video_encode_header() and + * uvc_video_encode_data(). Only bulk transfers are currently supported. + * + * uvc_video_encode_header is called at the start of a payload. It adds header + * data to the transfer buffer and returns the header size. As the only known + * UVC output device transfers a whole frame in a single payload, the EOF bit + * is always set in the header. + * + * uvc_video_encode_data is called for every URB and copies the data from the + * video buffer to the transfer buffer. + */ static int uvc_video_encode_header(struct uvc_video_device *video, struct uvc_buffer *buf, __u8 *data, int len) { @@ -953,7 +960,7 @@ int uvc_video_suspend(struct uvc_video_device *video) } /* - * Reconfigure the video interface and restart streaming if it was enable + * Reconfigure the video interface and restart streaming if it was enabled * before suspend. * * If an error occurs, disable the video queue. This will wake all pending @@ -985,8 +992,8 @@ int uvc_video_resume(struct uvc_video_device *video) */ /* - * Initialize the UVC video device by retrieving the default format and - * committing it. + * Initialize the UVC video device by switching to alternate setting 0 and + * retrieve the default format. * * Some cameras (namely the Fuji Finepix) set the format and frame * indexes to zero. The UVC standard doesn't clearly make this a spec @@ -1014,7 +1021,7 @@ int uvc_video_init(struct uvc_video_device *video) */ usb_set_interface(video->dev->udev, video->streaming->intfnum, 0); - /* Some webcams don't suport GET_DEF request on the probe control. We + /* Some webcams don't suport GET_DEF requests on the probe control. We * fall back to GET_CUR if GET_DEF fails. */ if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_DEF)) < 0 && diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index bcf4361..027947e 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -72,149 +72,149 @@ struct uvc_xu_control { * UVC constants */ -#define SC_UNDEFINED 0x00 -#define SC_VIDEOCONTROL 0x01 -#define SC_VIDEOSTREAMING 0x02 -#define SC_VIDEO_INTERFACE_COLLECTION 0x03 +#define SC_UNDEFINED 0x00 +#define SC_VIDEOCONTROL 0x01 +#define SC_VIDEOSTREAMING 0x02 +#define SC_VIDEO_INTERFACE_COLLECTION 0x03 -#define PC_PROTOCOL_UNDEFINED 0x00 +#define PC_PROTOCOL_UNDEFINED 0x00 -#define CS_UNDEFINED 0x20 -#define CS_DEVICE 0x21 -#define CS_CONFIGURATION 0x22 -#define CS_STRING 0x23 -#define CS_INTERFACE 0x24 -#define CS_ENDPOINT 0x25 +#define CS_UNDEFINED 0x20 +#define CS_DEVICE 0x21 +#define CS_CONFIGURATION 0x22 +#define CS_STRING 0x23 +#define CS_INTERFACE 0x24 +#define CS_ENDPOINT 0x25 /* VideoControl class specific interface descriptor */ -#define VC_DESCRIPTOR_UNDEFINED 0x00 -#define VC_HEADER 0x01 -#define VC_INPUT_TERMINAL 0x02 -#define VC_OUTPUT_TERMINAL 0x03 -#define VC_SELECTOR_UNIT 0x04 -#define VC_PROCESSING_UNIT 0x05 -#define VC_EXTENSION_UNIT 0x06 +#define VC_DESCRIPTOR_UNDEFINED 0x00 +#define VC_HEADER 0x01 +#define VC_INPUT_TERMINAL 0x02 +#define VC_OUTPUT_TERMINAL 0x03 +#define VC_SELECTOR_UNIT 0x04 +#define VC_PROCESSING_UNIT 0x05 +#define VC_EXTENSION_UNIT 0x06 /* VideoStreaming class specific interface descriptor */ -#define VS_UNDEFINED 0x00 -#define VS_INPUT_HEADER 0x01 -#define VS_OUTPUT_HEADER 0x02 -#define VS_STILL_IMAGE_FRAME 0x03 -#define VS_FORMAT_UNCOMPRESSED 0x04 -#define VS_FRAME_UNCOMPRESSED 0x05 -#define VS_FORMAT_MJPEG 0x06 -#define VS_FRAME_MJPEG 0x07 -#define VS_FORMAT_MPEG2TS 0x0a -#define VS_FORMAT_DV 0x0c -#define VS_COLORFORMAT 0x0d -#define VS_FORMAT_FRAME_BASED 0x10 -#define VS_FRAME_FRAME_BASED 0x11 -#define VS_FORMAT_STREAM_BASED 0x12 +#define VS_UNDEFINED 0x00 +#define VS_INPUT_HEADER 0x01 +#define VS_OUTPUT_HEADER 0x02 +#define VS_STILL_IMAGE_FRAME 0x03 +#define VS_FORMAT_UNCOMPRESSED 0x04 +#define VS_FRAME_UNCOMPRESSED 0x05 +#define VS_FORMAT_MJPEG 0x06 +#define VS_FRAME_MJPEG 0x07 +#define VS_FORMAT_MPEG2TS 0x0a +#define VS_FORMAT_DV 0x0c +#define VS_COLORFORMAT 0x0d +#define VS_FORMAT_FRAME_BASED 0x10 +#define VS_FRAME_FRAME_BASED 0x11 +#define VS_FORMAT_STREAM_BASED 0x12 /* Endpoint type */ -#define EP_UNDEFINED 0x00 -#define EP_GENERAL 0x01 -#define EP_ENDPOINT 0x02 -#define EP_INTERRUPT 0x03 +#define EP_UNDEFINED 0x00 +#define EP_GENERAL 0x01 +#define EP_ENDPOINT 0x02 +#define EP_INTERRUPT 0x03 /* Request codes */ -#define RC_UNDEFINED 0x00 -#define SET_CUR 0x01 -#define GET_CUR 0x81 -#define GET_MIN 0x82 -#define GET_MAX 0x83 -#define GET_RES 0x84 -#define GET_LEN 0x85 -#define GET_INFO 0x86 -#define GET_DEF 0x87 +#define RC_UNDEFINED 0x00 +#define SET_CUR 0x01 +#define GET_CUR 0x81 +#define GET_MIN 0x82 +#define GET_MAX 0x83 +#define GET_RES 0x84 +#define GET_LEN 0x85 +#define GET_INFO 0x86 +#define GET_DEF 0x87 /* VideoControl interface controls */ -#define VC_CONTROL_UNDEFINED 0x00 -#define VC_VIDEO_POWER_MODE_CONTROL 0x01 -#define VC_REQUEST_ERROR_CODE_CONTROL 0x02 +#define VC_CONTROL_UNDEFINED 0x00 +#define VC_VIDEO_POWER_MODE_CONTROL 0x01 +#define VC_REQUEST_ERROR_CODE_CONTROL 0x02 /* Terminal controls */ -#define TE_CONTROL_UNDEFINED 0x00 +#define TE_CONTROL_UNDEFINED 0x00 /* Selector Unit controls */ -#define SU_CONTROL_UNDEFINED 0x00 -#define SU_INPUT_SELECT_CONTROL 0x01 +#define SU_CONTROL_UNDEFINED 0x00 +#define SU_INPUT_SELECT_CONTROL 0x01 /* Camera Terminal controls */ -#define CT_CONTROL_UNDEFINED 0x00 -#define CT_SCANNING_MODE_CONTROL 0x01 -#define CT_AE_MODE_CONTROL 0x02 -#define CT_AE_PRIORITY_CONTROL 0x03 -#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 -#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 -#define CT_FOCUS_ABSOLUTE_CONTROL 0x06 -#define CT_FOCUS_RELATIVE_CONTROL 0x07 -#define CT_FOCUS_AUTO_CONTROL 0x08 -#define CT_IRIS_ABSOLUTE_CONTROL 0x09 -#define CT_IRIS_RELATIVE_CONTROL 0x0a -#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b -#define CT_ZOOM_RELATIVE_CONTROL 0x0c -#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d -#define CT_PANTILT_RELATIVE_CONTROL 0x0e -#define CT_ROLL_ABSOLUTE_CONTROL 0x0f -#define CT_ROLL_RELATIVE_CONTROL 0x10 -#define CT_PRIVACY_CONTROL 0x11 +#define CT_CONTROL_UNDEFINED 0x00 +#define CT_SCANNING_MODE_CONTROL 0x01 +#define CT_AE_MODE_CONTROL 0x02 +#define CT_AE_PRIORITY_CONTROL 0x03 +#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 +#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 +#define CT_FOCUS_ABSOLUTE_CONTROL 0x06 +#define CT_FOCUS_RELATIVE_CONTROL 0x07 +#define CT_FOCUS_AUTO_CONTROL 0x08 +#define CT_IRIS_ABSOLUTE_CONTROL 0x09 +#define CT_IRIS_RELATIVE_CONTROL 0x0a +#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b +#define CT_ZOOM_RELATIVE_CONTROL 0x0c +#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d +#define CT_PANTILT_RELATIVE_CONTROL 0x0e +#define CT_ROLL_ABSOLUTE_CONTROL 0x0f +#define CT_ROLL_RELATIVE_CONTROL 0x10 +#define CT_PRIVACY_CONTROL 0x11 /* Processing Unit controls */ -#define PU_CONTROL_UNDEFINED 0x00 -#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 -#define PU_BRIGHTNESS_CONTROL 0x02 -#define PU_CONTRAST_CONTROL 0x03 -#define PU_GAIN_CONTROL 0x04 -#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05 -#define PU_HUE_CONTROL 0x06 -#define PU_SATURATION_CONTROL 0x07 -#define PU_SHARPNESS_CONTROL 0x08 -#define PU_GAMMA_CONTROL 0x09 -#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a -#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b -#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c -#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d -#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e -#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f -#define PU_HUE_AUTO_CONTROL 0x10 -#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 -#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12 +#define PU_CONTROL_UNDEFINED 0x00 +#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 +#define PU_BRIGHTNESS_CONTROL 0x02 +#define PU_CONTRAST_CONTROL 0x03 +#define PU_GAIN_CONTROL 0x04 +#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05 +#define PU_HUE_CONTROL 0x06 +#define PU_SATURATION_CONTROL 0x07 +#define PU_SHARPNESS_CONTROL 0x08 +#define PU_GAMMA_CONTROL 0x09 +#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a +#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b +#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c +#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d +#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e +#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f +#define PU_HUE_AUTO_CONTROL 0x10 +#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 +#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12 #define LXU_MOTOR_PANTILT_RELATIVE_CONTROL 0x01 #define LXU_MOTOR_PANTILT_RESET_CONTROL 0x02 #define LXU_MOTOR_FOCUS_MOTOR_CONTROL 0x03 /* VideoStreaming interface controls */ -#define VS_CONTROL_UNDEFINED 0x00 -#define VS_PROBE_CONTROL 0x01 -#define VS_COMMIT_CONTROL 0x02 -#define VS_STILL_PROBE_CONTROL 0x03 -#define VS_STILL_COMMIT_CONTROL 0x04 -#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 -#define VS_STREAM_ERROR_CODE_CONTROL 0x06 -#define VS_GENERATE_KEY_FRAME_CONTROL 0x07 -#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 -#define VS_SYNC_DELAY_CONTROL 0x09 - -#define TT_VENDOR_SPECIFIC 0x0100 -#define TT_STREAMING 0x0101 +#define VS_CONTROL_UNDEFINED 0x00 +#define VS_PROBE_CONTROL 0x01 +#define VS_COMMIT_CONTROL 0x02 +#define VS_STILL_PROBE_CONTROL 0x03 +#define VS_STILL_COMMIT_CONTROL 0x04 +#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 +#define VS_STREAM_ERROR_CODE_CONTROL 0x06 +#define VS_GENERATE_KEY_FRAME_CONTROL 0x07 +#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 +#define VS_SYNC_DELAY_CONTROL 0x09 + +#define TT_VENDOR_SPECIFIC 0x0100 +#define TT_STREAMING 0x0101 /* Input Terminal types */ -#define ITT_VENDOR_SPECIFIC 0x0200 -#define ITT_CAMERA 0x0201 -#define ITT_MEDIA_TRANSPORT_INPUT 0x0202 +#define ITT_VENDOR_SPECIFIC 0x0200 +#define ITT_CAMERA 0x0201 +#define ITT_MEDIA_TRANSPORT_INPUT 0x0202 /* Output Terminal types */ -#define OTT_VENDOR_SPECIFIC 0x0300 -#define OTT_DISPLAY 0x0301 -#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 +#define OTT_VENDOR_SPECIFIC 0x0300 +#define OTT_DISPLAY 0x0301 +#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 /* External Terminal types */ -#define EXTERNAL_VENDOR_SPECIFIC 0x0400 -#define COMPOSITE_CONNECTOR 0x0401 -#define SVIDEO_CONNECTOR 0x0402 -#define COMPONENT_CONNECTOR 0x0403 +#define EXTERNAL_VENDOR_SPECIFIC 0x0400 +#define COMPOSITE_CONNECTOR 0x0401 +#define SVIDEO_CONNECTOR 0x0402 +#define COMPONENT_CONNECTOR 0x0403 #define UVC_TERM_INPUT 0x0000 #define UVC_TERM_OUTPUT 0x8000 @@ -541,11 +541,11 @@ struct uvc_streaming { }; enum uvc_buffer_state { - UVC_BUF_STATE_IDLE = 0, - UVC_BUF_STATE_QUEUED = 1, - UVC_BUF_STATE_ACTIVE = 2, - UVC_BUF_STATE_DONE = 3, - UVC_BUF_STATE_ERROR = 4, + UVC_BUF_STATE_IDLE = 0, + UVC_BUF_STATE_QUEUED = 1, + UVC_BUF_STATE_ACTIVE = 2, + UVC_BUF_STATE_DONE = 3, + UVC_BUF_STATE_ERROR = 4, }; struct uvc_buffer { diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c index fbe9cc0..2120880 100644 --- a/drivers/media/video/v4l2-subdev.c +++ b/drivers/media/video/v4l2-subdev.c @@ -28,13 +28,13 @@ int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg) { switch (cmd) { case VIDIOC_QUERYCTRL: - return v4l2_subdev_call(sd, core, querymenu, arg); + return v4l2_subdev_call(sd, core, queryctrl, arg); case VIDIOC_G_CTRL: return v4l2_subdev_call(sd, core, g_ctrl, arg); case VIDIOC_S_CTRL: return v4l2_subdev_call(sd, core, s_ctrl, arg); case VIDIOC_QUERYMENU: - return v4l2_subdev_call(sd, core, queryctrl, arg); + return v4l2_subdev_call(sd, core, querymenu, arg); case VIDIOC_LOG_STATUS: return v4l2_subdev_call(sd, core, log_status); case VIDIOC_DBG_G_CHIP_IDENT: diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 46b7ad4..e873a91 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -349,7 +349,6 @@ struct card_info { u16 i2c_decoder, i2c_encoder; /* I2C types */ u16 video_vfe, video_codec; /* videocodec types */ u16 audio_chip; /* audio type */ - u16 vendor_id, device_id; /* subsystem vendor/device ID */ int inputs; /* number of video inputs */ struct input { @@ -401,7 +400,6 @@ struct zoran { char name[32]; /* name of this device */ struct pci_dev *pci_dev; /* PCI device */ unsigned char revision; /* revision of zr36057 */ - unsigned int zr36057_adr; /* bus address of IO mem returned by PCI BIOS */ unsigned char __iomem *zr36057_mem;/* pointer to mapped IO memory */ spinlock_t spinlock; /* Spinlock */ @@ -490,16 +488,10 @@ struct zoran { wait_queue_head_t test_q; }; -/*The following should be done in more portable way. It depends on define - of _ALPHA_BUZ in the Makefile.*/ - -#ifdef _ALPHA_BUZ -#define btwrite(dat,adr) writel((dat), zr->zr36057_adr+(adr)) -#define btread(adr) readl(zr->zr36057_adr+(adr)) -#else +/* There was something called _ALPHA_BUZ that used the PCI address instead of + * the kernel iomapped address for btread/btwrite. */ #define btwrite(dat,adr) writel((dat), zr->zr36057_mem+(adr)) #define btread(adr) readl(zr->zr36057_mem+(adr)) -#endif #define btand(dat,adr) btwrite((dat) & btread(adr), adr) #define btor(dat,adr) btwrite((dat) | btread(adr), adr) diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 05f3919..5d2f090 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -61,17 +61,17 @@ extern const struct zoran_format zoran_formats[]; -static int card[BUZ_MAX] = { -1, -1, -1, -1 }; +static int card[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(card, int, NULL, 0444); -MODULE_PARM_DESC(card, "The type of card"); +MODULE_PARM_DESC(card, "Card type"); -static int encoder[BUZ_MAX] = { -1, -1, -1, -1 }; +static int encoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(encoder, int, NULL, 0444); -MODULE_PARM_DESC(encoder, "i2c TV encoder"); +MODULE_PARM_DESC(encoder, "Video encoder chip"); -static int decoder[BUZ_MAX] = { -1, -1, -1, -1 }; +static int decoder[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(decoder, int, NULL, 0444); -MODULE_PARM_DESC(decoder, "i2c TV decoder"); +MODULE_PARM_DESC(decoder, "Video decoder chip"); /* The video mem address of the video card. @@ -104,9 +104,9 @@ module_param(default_norm, int, 0444); MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)"); /* /dev/videoN, -1 for autodetect */ -static int video_nr[BUZ_MAX] = {-1, -1, -1, -1}; +static int video_nr[BUZ_MAX] = { [0 ... (BUZ_MAX-1)] = -1 }; module_param_array(video_nr, int, NULL, 0444); -MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)"); +MODULE_PARM_DESC(video_nr, "Video device number (-1=Auto)"); /* Number and size of grab buffers for Video 4 Linux @@ -153,9 +153,21 @@ MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver"); MODULE_AUTHOR("Serguei Miridonov"); MODULE_LICENSE("GPL"); +#define ZR_DEVICE(subven, subdev, data) { \ + .vendor = PCI_VENDOR_ID_ZORAN, .device = PCI_DEVICE_ID_ZORAN_36057, \ + .subvendor = (subven), .subdevice = (subdev), .driver_data = (data) } + +static struct pci_device_id zr36067_pci_tbl[] = { + ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC10PLUS, DC10plus), + ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC30PLUS, DC30plus), + ZR_DEVICE(PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, PCI_DEVICE_ID_LML_33R10, LML33R10), + ZR_DEVICE(PCI_VENDOR_ID_IOMEGA, PCI_DEVICE_ID_IOMEGA_BUZ, BUZ), + ZR_DEVICE(PCI_ANY_ID, PCI_ANY_ID, NUM_CARDS), + {0} +}; +MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); -int zoran_num; /* number of Buzs in use */ -struct zoran *zoran[BUZ_MAX]; +static unsigned int zoran_num; /* number of cards found */ /* videocodec bus functions ZR36060 */ static u32 @@ -472,8 +484,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = DC10plus, .name = "DC10plus", - .vendor_id = PCI_VENDOR_ID_MIRO, - .device_id = PCI_DEVICE_ID_MIRO_DC10PLUS, .i2c_decoder = I2C_DRIVERID_SAA7110, .i2c_encoder = I2C_DRIVERID_ADV7175, .video_codec = CODEC_TYPE_ZR36060, @@ -531,8 +541,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = DC30plus, .name = "DC30plus", - .vendor_id = PCI_VENDOR_ID_MIRO, - .device_id = PCI_DEVICE_ID_MIRO_DC30PLUS, .i2c_decoder = I2C_DRIVERID_VPX3220, .i2c_encoder = I2C_DRIVERID_ADV7175, .video_codec = CODEC_TYPE_ZR36050, @@ -589,8 +597,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = LML33R10, .name = "LML33R10", - .vendor_id = PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, - .device_id = PCI_DEVICE_ID_LML_33R10, .i2c_decoder = I2C_DRIVERID_SAA7114, .i2c_encoder = I2C_DRIVERID_ADV7170, .video_codec = CODEC_TYPE_ZR36060, @@ -618,8 +624,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = BUZ, .name = "Buz", - .vendor_id = PCI_VENDOR_ID_IOMEGA, - .device_id = PCI_DEVICE_ID_IOMEGA_BUZ, .i2c_decoder = I2C_DRIVERID_SAA7111A, .i2c_encoder = I2C_DRIVERID_SAA7185B, .video_codec = CODEC_TYPE_ZR36060, @@ -649,8 +653,6 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .name = "6-Eyes", /* AverMedia chose not to brand the 6-Eyes. Thus it can't be autodetected, and requires card=x. */ - .vendor_id = -1, - .device_id = -1, .i2c_decoder = I2C_DRIVERID_KS0127, .i2c_encoder = I2C_DRIVERID_BT866, .video_codec = CODEC_TYPE_ZR36060, @@ -1138,7 +1140,8 @@ zr36057_init (struct zoran *zr) strcpy(zr->video_dev->name, ZR_DEVNAME(zr)); err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]); if (err < 0) - goto exit_unregister; + goto exit_free; + video_set_drvdata(zr->video_dev, zr); zoran_init_hardware(zr); if (zr36067_debug > 2) @@ -1153,19 +1156,19 @@ zr36057_init (struct zoran *zr) zr->initialized = 1; return 0; -exit_unregister: - zoran_unregister_i2c(zr); exit_free: kfree(zr->stat_com); kfree(zr->video_dev); return err; } -static void -zoran_release (struct zoran *zr) +static void __devexit zoran_remove(struct pci_dev *pdev) { + struct zoran *zr = pci_get_drvdata(pdev); + if (!zr->initialized) goto exit_free; + /* unregister videocodec bus */ if (zr->codec) { struct videocodec_master *master = zr->codec->master_data; @@ -1194,6 +1197,7 @@ zoran_release (struct zoran *zr) pci_disable_device(zr->pci_dev); video_unregister_device(zr->video_dev); exit_free: + pci_set_drvdata(pdev, NULL); kfree(zr); } @@ -1256,338 +1260,329 @@ zoran_setup_videocodec (struct zoran *zr, * Scan for a Buz card (actually for the PCI controller ZR36057), * request the irq and map the io memory */ -static int __devinit -find_zr36057 (void) +static int __devinit zoran_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { unsigned char latency, need_latency; struct zoran *zr; - struct pci_dev *dev = NULL; int result; struct videocodec_master *master_vfe = NULL; struct videocodec_master *master_codec = NULL; int card_num; char *i2c_enc_name, *i2c_dec_name, *codec_name, *vfe_name; + unsigned int nr; - zoran_num = 0; - while (zoran_num < BUZ_MAX && - (dev = pci_get_device(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, dev)) != NULL) { - card_num = card[zoran_num]; - zr = kzalloc(sizeof(struct zoran), GFP_KERNEL); - if (!zr) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - kzalloc failed\n", - ZORAN_NAME); - continue; - } - zr->pci_dev = dev; - //zr->zr36057_mem = NULL; - zr->id = zoran_num; - snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); - spin_lock_init(&zr->spinlock); - mutex_init(&zr->resource_lock); - if (pci_enable_device(dev)) - goto zr_free_mem; - zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0); - pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, - &zr->revision); - if (zr->revision < 2) { - dprintk(1, - KERN_INFO - "%s: Zoran ZR36057 (rev %d) irq: %d, memory: 0x%08x.\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); - if (card_num == -1) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no card specified, please use the card=X insmod option\n", - ZR_DEVNAME(zr)); - goto zr_free_mem; - } - } else { - int i; - unsigned short ss_vendor, ss_device; + nr = zoran_num++; + if (nr >= BUZ_MAX) { + dprintk(1, + KERN_ERR + "%s: driver limited to %d card(s) maximum\n", + ZORAN_NAME, BUZ_MAX); + return -ENOENT; + } - ss_vendor = zr->pci_dev->subsystem_vendor; - ss_device = zr->pci_dev->subsystem_device; + zr = kzalloc(sizeof(struct zoran), GFP_KERNEL); + if (!zr) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - kzalloc failed\n", + ZORAN_NAME); + return -ENOMEM; + } + zr->pci_dev = pdev; + zr->id = nr; + snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); + spin_lock_init(&zr->spinlock); + mutex_init(&zr->resource_lock); + if (pci_enable_device(pdev)) + goto zr_free_mem; + pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision); + + dprintk(1, + KERN_INFO + "%s: Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08llx\n", + ZR_DEVNAME(zr), zr->revision < 2 ? '5' : '6', zr->revision, + zr->pci_dev->irq, (uint64_t)pci_resource_start(zr->pci_dev, 0)); + if (zr->revision >= 2) { + dprintk(1, + KERN_INFO + "%s: Subsystem vendor=0x%04x id=0x%04x\n", + ZR_DEVNAME(zr), zr->pci_dev->subsystem_vendor, + zr->pci_dev->subsystem_device); + } + + /* Use auto-detected card type? */ + if (card[nr] == -1) { + if (zr->revision < 2) { dprintk(1, - KERN_INFO - "%s: Zoran ZR36067 (rev %d) irq: %d, memory: 0x%08x\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); + KERN_ERR + "%s: No card type specified, please use the card=X module parameter\n", + ZR_DEVNAME(zr)); dprintk(1, - KERN_INFO - "%s: subsystem vendor=0x%04x id=0x%04x\n", - ZR_DEVNAME(zr), ss_vendor, ss_device); - if (card_num == -1) { - dprintk(3, - KERN_DEBUG - "%s: find_zr36057() - trying to autodetect card type\n", - ZR_DEVNAME(zr)); - for (i=0;i<NUM_CARDS;i++) { - if (ss_vendor == zoran_cards[i].vendor_id && - ss_device == zoran_cards[i].device_id) { - dprintk(3, - KERN_DEBUG - "%s: find_zr36057() - card %s detected\n", - ZR_DEVNAME(zr), - zoran_cards[i].name); - card_num = i; - break; - } - } - if (i == NUM_CARDS) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - unknown card\n", - ZR_DEVNAME(zr)); - goto zr_free_mem; - } - } - } - - if (card_num < 0 || card_num >= NUM_CARDS) { - dprintk(2, KERN_ERR - "%s: find_zr36057() - invalid cardnum %d\n", - ZR_DEVNAME(zr), card_num); + "%s: It is not possible to auto-detect ZR36057 based cards\n", + ZR_DEVNAME(zr)); goto zr_free_mem; } - /* even though we make this a non pointer and thus - * theoretically allow for making changes to this struct - * on a per-individual card basis at runtime, this is - * strongly discouraged. This structure is intended to - * keep general card information, no settings or anything */ - zr->card = zoran_cards[card_num]; - snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), - "%s[%u]", zr->card.name, zr->id); - - zr->zr36057_mem = ioremap_nocache(zr->zr36057_adr, 0x1000); - if (!zr->zr36057_mem) { + card_num = ent->driver_data; + if (card_num >= NUM_CARDS) { dprintk(1, KERN_ERR - "%s: find_zr36057() - ioremap failed\n", + "%s: Unknown card, try specifying card=X module parameter\n", ZR_DEVNAME(zr)); goto zr_free_mem; } - - result = request_irq(zr->pci_dev->irq, - zoran_irq, - IRQF_SHARED | IRQF_DISABLED, - ZR_DEVNAME(zr), - (void *) zr); - if (result < 0) { - if (result == -EINVAL) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - bad irq number or handler\n", - ZR_DEVNAME(zr)); - } else if (result == -EBUSY) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n", - ZR_DEVNAME(zr), zr->pci_dev->irq); - } else { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - can't assign irq, error code %d\n", - ZR_DEVNAME(zr), result); - } - goto zr_unmap; - } - - /* set PCI latency timer */ - pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, - &latency); - need_latency = zr->revision > 1 ? 32 : 48; - if (latency != need_latency) { - dprintk(2, - KERN_INFO - "%s: Changing PCI latency from %d to %d.\n", - ZR_DEVNAME(zr), latency, need_latency); - pci_write_config_byte(zr->pci_dev, - PCI_LATENCY_TIMER, - need_latency); + dprintk(3, + KERN_DEBUG + "%s: %s() - card %s detected\n", + ZR_DEVNAME(zr), __func__, zoran_cards[card_num].name); + } else { + card_num = card[nr]; + if (card_num >= NUM_CARDS || card_num < 0) { + dprintk(1, + KERN_ERR + "%s: User specified card type %d out of range (0 .. %d)\n", + ZR_DEVNAME(zr), card_num, NUM_CARDS - 1); + goto zr_free_mem; } + } - zr36057_restart(zr); - /* i2c */ - dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n", - ZR_DEVNAME(zr)); + /* even though we make this a non pointer and thus + * theoretically allow for making changes to this struct + * on a per-individual card basis at runtime, this is + * strongly discouraged. This structure is intended to + * keep general card information, no settings or anything */ + zr->card = zoran_cards[card_num]; + snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), + "%s[%u]", zr->card.name, zr->id); + + zr->zr36057_mem = pci_ioremap_bar(zr->pci_dev, 0); + if (!zr->zr36057_mem) { + dprintk(1, + KERN_ERR + "%s: %s() - ioremap failed\n", + ZR_DEVNAME(zr), __func__); + goto zr_free_mem; + } - /* i2c decoder */ - if (decoder[zr->id] != -1) { - i2c_dec_name = i2cid_to_modulename(decoder[zr->id]); - zr->card.i2c_decoder = decoder[zr->id]; - } else if (zr->card.i2c_decoder != 0) { - i2c_dec_name = - i2cid_to_modulename(zr->card.i2c_decoder); + result = request_irq(zr->pci_dev->irq, zoran_irq, + IRQF_SHARED | IRQF_DISABLED, ZR_DEVNAME(zr), zr); + if (result < 0) { + if (result == -EINVAL) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - bad irq number or handler\n", + ZR_DEVNAME(zr)); + } else if (result == -EBUSY) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n", + ZR_DEVNAME(zr), zr->pci_dev->irq); } else { - i2c_dec_name = NULL; + dprintk(1, + KERN_ERR + "%s: find_zr36057() - can't assign irq, error code %d\n", + ZR_DEVNAME(zr), result); } + goto zr_unmap; + } - if (i2c_dec_name) { - if ((result = request_module(i2c_dec_name)) < 0) { - dprintk(1, - KERN_ERR - "%s: failed to load module %s: %d\n", - ZR_DEVNAME(zr), i2c_dec_name, result); - } - } + /* set PCI latency timer */ + pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, + &latency); + need_latency = zr->revision > 1 ? 32 : 48; + if (latency != need_latency) { + dprintk(2, + KERN_INFO + "%s: Changing PCI latency from %d to %d\n", + ZR_DEVNAME(zr), latency, need_latency); + pci_write_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, + need_latency); + } - /* i2c encoder */ - if (encoder[zr->id] != -1) { - i2c_enc_name = i2cid_to_modulename(encoder[zr->id]); - zr->card.i2c_encoder = encoder[zr->id]; - } else if (zr->card.i2c_encoder != 0) { - i2c_enc_name = - i2cid_to_modulename(zr->card.i2c_encoder); - } else { - i2c_enc_name = NULL; - } + zr36057_restart(zr); + /* i2c */ + dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n", + ZR_DEVNAME(zr)); + + /* i2c decoder */ + if (decoder[zr->id] != -1) { + i2c_dec_name = i2cid_to_modulename(decoder[zr->id]); + zr->card.i2c_decoder = decoder[zr->id]; + } else if (zr->card.i2c_decoder != 0) { + i2c_dec_name = i2cid_to_modulename(zr->card.i2c_decoder); + } else { + i2c_dec_name = NULL; + } - if (i2c_enc_name) { - if ((result = request_module(i2c_enc_name)) < 0) { - dprintk(1, - KERN_ERR - "%s: failed to load module %s: %d\n", - ZR_DEVNAME(zr), i2c_enc_name, result); - } + if (i2c_dec_name) { + result = request_module(i2c_dec_name); + if (result < 0) { + dprintk(1, + KERN_ERR + "%s: failed to load module %s: %d\n", + ZR_DEVNAME(zr), i2c_dec_name, result); } + } + + /* i2c encoder */ + if (encoder[zr->id] != -1) { + i2c_enc_name = i2cid_to_modulename(encoder[zr->id]); + zr->card.i2c_encoder = encoder[zr->id]; + } else if (zr->card.i2c_encoder != 0) { + i2c_enc_name = i2cid_to_modulename(zr->card.i2c_encoder); + } else { + i2c_enc_name = NULL; + } - if (zoran_register_i2c(zr) < 0) { + if (i2c_enc_name) { + result = request_module(i2c_enc_name); + if (result < 0) { dprintk(1, KERN_ERR - "%s: find_zr36057() - can't initialize i2c bus\n", - ZR_DEVNAME(zr)); - goto zr_free_irq; + "%s: failed to load module %s: %d\n", + ZR_DEVNAME(zr), i2c_enc_name, result); } + } - dprintk(2, - KERN_INFO "%s: Initializing videocodec bus...\n", + if (zoran_register_i2c(zr) < 0) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - can't initialize i2c bus\n", ZR_DEVNAME(zr)); + goto zr_free_irq; + } - if (zr->card.video_codec != 0 && - (codec_name = - codecid_to_modulename(zr->card.video_codec)) != NULL) { - if ((result = request_module(codec_name)) < 0) { + dprintk(2, + KERN_INFO "%s: Initializing videocodec bus...\n", + ZR_DEVNAME(zr)); + + if (zr->card.video_codec) { + codec_name = codecid_to_modulename(zr->card.video_codec); + if (codec_name) { + result = request_module(codec_name); + if (result) { dprintk(1, KERN_ERR "%s: failed to load modules %s: %d\n", ZR_DEVNAME(zr), codec_name, result); } } - if (zr->card.video_vfe != 0 && - (vfe_name = - codecid_to_modulename(zr->card.video_vfe)) != NULL) { - if ((result = request_module(vfe_name)) < 0) { + } + if (zr->card.video_vfe) { + vfe_name = codecid_to_modulename(zr->card.video_vfe); + if (vfe_name) { + result = request_module(vfe_name); + if (result < 0) { dprintk(1, KERN_ERR "%s: failed to load modules %s: %d\n", ZR_DEVNAME(zr), vfe_name, result); } } + } - /* reset JPEG codec */ - jpeg_codec_sleep(zr, 1); - jpeg_codec_reset(zr); - /* video bus enabled */ - /* display codec revision */ - if (zr->card.video_codec != 0) { - master_codec = zoran_setup_videocodec(zr, - zr->card.video_codec); - if (!master_codec) - goto zr_unreg_i2c; - zr->codec = videocodec_attach(master_codec); - if (!zr->codec) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no codec found\n", - ZR_DEVNAME(zr)); - goto zr_free_codec; - } - if (zr->codec->type != zr->card.video_codec) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - wrong codec\n", - ZR_DEVNAME(zr)); - goto zr_detach_codec; - } + /* reset JPEG codec */ + jpeg_codec_sleep(zr, 1); + jpeg_codec_reset(zr); + /* video bus enabled */ + /* display codec revision */ + if (zr->card.video_codec != 0) { + master_codec = zoran_setup_videocodec(zr, zr->card.video_codec); + if (!master_codec) + goto zr_unreg_i2c; + zr->codec = videocodec_attach(master_codec); + if (!zr->codec) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - no codec found\n", + ZR_DEVNAME(zr)); + goto zr_free_codec; } - if (zr->card.video_vfe != 0) { - master_vfe = zoran_setup_videocodec(zr, - zr->card.video_vfe); - if (!master_vfe) - goto zr_detach_codec; - zr->vfe = videocodec_attach(master_vfe); - if (!zr->vfe) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no VFE found\n", - ZR_DEVNAME(zr)); - goto zr_free_vfe; - } - if (zr->vfe->type != zr->card.video_vfe) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() = wrong VFE\n", - ZR_DEVNAME(zr)); - goto zr_detach_vfe; - } + if (zr->codec->type != zr->card.video_codec) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - wrong codec\n", + ZR_DEVNAME(zr)); + goto zr_detach_codec; + } + } + if (zr->card.video_vfe != 0) { + master_vfe = zoran_setup_videocodec(zr, zr->card.video_vfe); + if (!master_vfe) + goto zr_detach_codec; + zr->vfe = videocodec_attach(master_vfe); + if (!zr->vfe) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - no VFE found\n", + ZR_DEVNAME(zr)); + goto zr_free_vfe; + } + if (zr->vfe->type != zr->card.video_vfe) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() = wrong VFE\n", + ZR_DEVNAME(zr)); + goto zr_detach_vfe; } - /* Success so keep the pci_dev referenced */ - pci_dev_get(zr->pci_dev); - zoran[zoran_num++] = zr; - continue; - - // Init errors - zr_detach_vfe: - videocodec_detach(zr->vfe); - zr_free_vfe: - kfree(master_vfe); - zr_detach_codec: - videocodec_detach(zr->codec); - zr_free_codec: - kfree(master_codec); - zr_unreg_i2c: - zoran_unregister_i2c(zr); - zr_free_irq: - btwrite(0, ZR36057_SPGPPCR); - free_irq(zr->pci_dev->irq, zr); - zr_unmap: - iounmap(zr->zr36057_mem); - zr_free_mem: - kfree(zr); - continue; } - if (dev) /* Clean up ref count on early exit */ - pci_dev_put(dev); - if (zoran_num == 0) { - dprintk(1, KERN_INFO "No known MJPEG cards found.\n"); + /* take care of Natoma chipset and a revision 1 zr36057 */ + if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) { + zr->jpg_buffers.need_contiguous = 1; + dprintk(1, + KERN_INFO + "%s: ZR36057/Natoma bug, max. buffer size is 128K\n", + ZR_DEVNAME(zr)); } - return zoran_num; + + if (zr36057_init(zr) < 0) + goto zr_detach_vfe; + + zoran_proc_init(zr); + + pci_set_drvdata(pdev, zr); + + return 0; + +zr_detach_vfe: + videocodec_detach(zr->vfe); +zr_free_vfe: + kfree(master_vfe); +zr_detach_codec: + videocodec_detach(zr->codec); +zr_free_codec: + kfree(master_codec); +zr_unreg_i2c: + zoran_unregister_i2c(zr); +zr_free_irq: + btwrite(0, ZR36057_SPGPPCR); + free_irq(zr->pci_dev->irq, zr); +zr_unmap: + iounmap(zr->zr36057_mem); +zr_free_mem: + kfree(zr); + + return -ENODEV; } -static int __init -init_dc10_cards (void) +static struct pci_driver zoran_driver = { + .name = "zr36067", + .id_table = zr36067_pci_tbl, + .probe = zoran_probe, + .remove = zoran_remove, +}; + +static int __init zoran_init(void) { - int i; + int res; - memset(zoran, 0, sizeof(zoran)); printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n", MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION); - /* Look for cards */ - if (find_zr36057() < 0) { - return -EIO; - } - if (zoran_num == 0) - return -ENODEV; - dprintk(1, KERN_INFO "%s: %d card(s) found\n", ZORAN_NAME, - zoran_num); /* check the parameters we have been given, adjust if necessary */ if (v4l_nbufs < 2) v4l_nbufs = 2; @@ -1629,37 +1624,22 @@ init_dc10_cards (void) ZORAN_NAME); } - /* take care of Natoma chipset and a revision 1 zr36057 */ - for (i = 0; i < zoran_num; i++) { - struct zoran *zr = zoran[i]; - - if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) { - zr->jpg_buffers.need_contiguous = 1; - dprintk(1, - KERN_INFO - "%s: ZR36057/Natoma bug, max. buffer size is 128K\n", - ZR_DEVNAME(zr)); - } - - if (zr36057_init(zr) < 0) { - for (i = 0; i < zoran_num; i++) - zoran_release(zoran[i]); - return -EIO; - } - zoran_proc_init(zr); + res = pci_register_driver(&zoran_driver); + if (res) { + dprintk(1, + KERN_ERR + "%s: Unable to register ZR36057 driver\n", + ZORAN_NAME); + return res; } return 0; } -static void __exit -unload_dc10_cards (void) +static void __exit zoran_exit(void) { - int i; - - for (i = 0; i < zoran_num; i++) - zoran_release(zoran[i]); + pci_unregister_driver(&zoran_driver); } -module_init(init_dc10_cards); -module_exit(unload_dc10_cards); +module_init(zoran_init); +module_exit(zoran_exit); diff --git a/drivers/media/video/zoran/zoran_card.h b/drivers/media/video/zoran/zoran_card.h index e4dc9d2..4507bdc 100644 --- a/drivers/media/video/zoran/zoran_card.h +++ b/drivers/media/video/zoran/zoran_card.h @@ -40,8 +40,6 @@ extern int zr36067_debug; /* Anybody who uses more than four? */ #define BUZ_MAX 4 -extern int zoran_num; -extern struct zoran *zoran[BUZ_MAX]; extern struct video_device zoran_template; diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index b58b9dd..120ef23 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1196,83 +1196,54 @@ zoran_close_end_session (struct file *file) * Open a zoran card. Right now the flags stuff is just playing */ -static int -zoran_open(struct file *file) +static int zoran_open(struct file *file) { - unsigned int minor = video_devdata(file)->minor; - struct zoran *zr = NULL; + struct zoran *zr = video_drvdata(file); struct zoran_fh *fh; - int i, res, first_open = 0, have_module_locks = 0; + int res, first_open = 0; - lock_kernel(); - /* find the device */ - for (i = 0; i < zoran_num; i++) { - if (zoran[i]->video_dev->minor == minor) { - zr = zoran[i]; - break; - } - } + dprintk(2, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n", + ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user + 1); - if (!zr) { - dprintk(1, KERN_ERR "%s: device not found!\n", ZORAN_NAME); - res = -ENODEV; - goto open_unlock_and_return; - } + lock_kernel(); /* see fs/device.c - the kernel already locks during open(), * so locking ourselves only causes deadlocks */ /*mutex_lock(&zr->resource_lock);*/ + if (zr->user >= 2048) { + dprintk(1, KERN_ERR "%s: too many users (%d) on device\n", + ZR_DEVNAME(zr), zr->user); + res = -EBUSY; + goto fail_unlock; + } + if (!zr->decoder) { dprintk(1, KERN_ERR "%s: no TV decoder loaded for device!\n", ZR_DEVNAME(zr)); res = -EIO; - goto open_unlock_and_return; + goto fail_unlock; } - /* try to grab a module lock */ - if (!try_module_get(THIS_MODULE)) { - dprintk(1, - KERN_ERR - "%s: failed to acquire my own lock! PANIC!\n", - ZR_DEVNAME(zr)); - res = -ENODEV; - goto open_unlock_and_return; - } if (!try_module_get(zr->decoder->driver->driver.owner)) { dprintk(1, KERN_ERR - "%s: failed to grab ownership of i2c decoder\n", + "%s: failed to grab ownership of video decoder\n", ZR_DEVNAME(zr)); res = -EIO; - module_put(THIS_MODULE); - goto open_unlock_and_return; + goto fail_unlock; } if (zr->encoder && !try_module_get(zr->encoder->driver->driver.owner)) { dprintk(1, KERN_ERR - "%s: failed to grab ownership of i2c encoder\n", + "%s: failed to grab ownership of video encoder\n", ZR_DEVNAME(zr)); res = -EIO; - module_put(zr->decoder->driver->driver.owner); - module_put(THIS_MODULE); - goto open_unlock_and_return; + goto fail_decoder; } - have_module_locks = 1; - - if (zr->user >= 2048) { - dprintk(1, KERN_ERR "%s: too many users (%d) on device\n", - ZR_DEVNAME(zr), zr->user); - res = -EBUSY; - goto open_unlock_and_return; - } - - dprintk(1, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n", - ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user); - /* now, create the open()-specific file_ops struct */ fh = kzalloc(sizeof(struct zoran_fh), GFP_KERNEL); if (!fh) { @@ -1281,7 +1252,7 @@ zoran_open(struct file *file) "%s: zoran_open() - allocation of zoran_fh failed\n", ZR_DEVNAME(zr)); res = -ENOMEM; - goto open_unlock_and_return; + goto fail_encoder; } /* used to be BUZ_MAX_WIDTH/HEIGHT, but that gives overflows * on norm-change! */ @@ -1292,9 +1263,8 @@ zoran_open(struct file *file) KERN_ERR "%s: zoran_open() - allocation of overlay_mask failed\n", ZR_DEVNAME(zr)); - kfree(fh); res = -ENOMEM; - goto open_unlock_and_return; + goto fail_fh; } if (zr->user++ == 0) @@ -1319,22 +1289,19 @@ zoran_open(struct file *file) return 0; -open_unlock_and_return: - /* if we grabbed locks, release them accordingly */ - if (have_module_locks) { - module_put(zr->decoder->driver->driver.owner); - if (zr->encoder) { - module_put(zr->encoder->driver->driver.owner); - } - module_put(THIS_MODULE); - } - - /* if there's no device found, we didn't obtain the lock either */ - if (zr) { - /*mutex_unlock(&zr->resource_lock);*/ - } +fail_fh: + kfree(fh); +fail_encoder: + if (zr->encoder) + module_put(zr->encoder->driver->driver.owner); +fail_decoder: + module_put(zr->decoder->driver->driver.owner); +fail_unlock: unlock_kernel(); + dprintk(2, KERN_INFO "%s: open failed (%d), users(-)=%d\n", + ZR_DEVNAME(zr), res, zr->user); + return res; } @@ -1344,8 +1311,8 @@ zoran_close(struct file *file) struct zoran_fh *fh = file->private_data; struct zoran *zr = fh->zr; - dprintk(1, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n", - ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user); + dprintk(2, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n", + ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user - 1); /* kernel locks (fs/device.c), so don't do that ourselves * (prevents deadlocks) */ @@ -1391,10 +1358,8 @@ zoran_close(struct file *file) /* release locks on the i2c modules */ module_put(zr->decoder->driver->driver.owner); - if (zr->encoder) { - module_put(zr->encoder->driver->driver.owner); - } - module_put(THIS_MODULE); + if (zr->encoder) + module_put(zr->encoder->driver->driver.owner); /*mutex_unlock(&zr->resource_lock);*/ diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index 05e2982..10c421b 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -758,7 +758,7 @@ static void __exit ilo_exit(void) class_destroy(ilo_class); } -MODULE_VERSION("0.05"); +MODULE_VERSION("0.06"); MODULE_ALIAS(ILO_NAME); MODULE_DESCRIPTION(ILO_NAME); MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>"); diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 9cd2ebe..45fd653 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -49,9 +49,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING)) return; - - DBUG_ON(ch->local_msgqueue == NULL); - DBUG_ON(ch->remote_msgqueue == NULL); } if (!(ch->flags & XPC_C_OPENREPLY)) { diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 82fb995..2e97576 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -1106,8 +1106,6 @@ xpc_process_activate_IRQ_rcvd_sn2(void) int n_IRQs_expected; int n_IRQs_detected; - DBUG_ON(xpc_activate_IRQ_rcvd == 0); - spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); n_IRQs_expected = xpc_activate_IRQ_rcvd; xpc_activate_IRQ_rcvd = 0; @@ -1726,6 +1724,7 @@ xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch) msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue + (get % ch->local_nentries) * ch->entry_size); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); msg->flags = 0; } while (++get < ch_sn2->remote_GP.get); } @@ -1740,11 +1739,18 @@ xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch) struct xpc_msg_sn2 *msg; s64 put; - put = ch_sn2->w_remote_GP.put; + /* flags are zeroed when the buffer is allocated */ + if (ch_sn2->remote_GP.put < ch->remote_nentries) + return; + + put = max(ch_sn2->w_remote_GP.put, ch->remote_nentries); do { msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + (put % ch->remote_nentries) * ch->entry_size); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); + DBUG_ON(!(msg->flags & XPC_M_SN2_DONE)); + DBUG_ON(msg->number != put - ch->remote_nentries); msg->flags = 0; } while (++put < ch_sn2->remote_GP.put); } @@ -1836,6 +1842,7 @@ xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number) */ xpc_clear_remote_msgqueue_flags_sn2(ch); + smp_wmb(); /* ensure flags have been cleared before bte_copy */ ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put; dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, " @@ -1934,7 +1941,7 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch) break; get = ch_sn2->w_local_GP.get; - rmb(); /* guarantee that .get loads before .put */ + smp_rmb(); /* guarantee that .get loads before .put */ if (get == ch_sn2->w_remote_GP.put) break; @@ -1956,11 +1963,13 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch) msg = xpc_pull_remote_msg_sn2(ch, get); - DBUG_ON(msg != NULL && msg->number != get); - DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE)); - DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY)); + if (msg != NULL) { + DBUG_ON(msg->number != get); + DBUG_ON(msg->flags & XPC_M_SN2_DONE); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); - payload = &msg->payload; + payload = &msg->payload; + } break; } @@ -2053,7 +2062,7 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, while (1) { put = ch_sn2->w_local_GP.put; - rmb(); /* guarantee that .put loads before .get */ + smp_rmb(); /* guarantee that .put loads before .get */ if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) { /* There are available message entries. We need to try @@ -2186,7 +2195,7 @@ xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload, * The preceding store of msg->flags must occur before the following * load of local_GP->put. */ - mb(); + smp_mb(); /* see if the message is next in line to be sent, if so send it */ @@ -2277,8 +2286,9 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload) dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n", (void *)msg, msg_number, ch->partid, ch->number); - DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) != + DBUG_ON((((u64)msg - (u64)ch->sn.sn2.remote_msgqueue) / ch->entry_size) != msg_number % ch->remote_nentries); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); DBUG_ON(msg->flags & XPC_M_SN2_DONE); msg->flags |= XPC_M_SN2_DONE; @@ -2287,7 +2297,7 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload) * The preceding store of msg->flags must occur before the following * load of local_GP->get. */ - mb(); + smp_mb(); /* * See if this message is next in line to be acknowledged as having diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 91a55b1..f17f7d4 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -1423,7 +1423,7 @@ xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload, atomic_inc(&ch->n_to_notify); msg_slot->key = key; - wmb(); /* a non-NULL func must hit memory after the key */ + smp_wmb(); /* a non-NULL func must hit memory after the key */ msg_slot->func = func; if (ch->flags & XPC_C_DISCONNECTING) { diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 0efa390..99d4b28 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -145,6 +145,16 @@ config MMC_IMX If unsure, say N. +config MMC_MXC + tristate "Freescale i.MX2/3 Multimedia Card Interface support" + depends on ARCH_MXC + help + This selects the Freescale i.MX2/3 Multimedia card Interface. + If you have a i.MX platform with a Multimedia Card slot, + say Y or M here. + + If unsure, say N. + config MMC_TIFM_SD tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)" depends on EXPERIMENTAL && PCI diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 98cab84..dedec55 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -9,6 +9,7 @@ endif obj-$(CONFIG_MMC_ARMMMCI) += mmci.o obj-$(CONFIG_MMC_PXA) += pxamci.o obj-$(CONFIG_MMC_IMX) += imxmmc.o +obj-$(CONFIG_MMC_MXC) += mxcmmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 1bcbdd6..2909bbc8 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -430,6 +430,8 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) clk = 255; host->cclk = host->mclk / (2 * (clk + 1)); } + if (host->hw_designer == 0x80) + clk |= MCI_FCEN; /* Bug fix in ST IP block */ clk |= MCI_CLK_ENABLE; } @@ -440,15 +442,27 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_OFF: break; case MMC_POWER_UP: - pwr |= MCI_PWR_UP; - break; + /* The ST version does not have this, fall through to POWER_ON */ + if (host->hw_designer != 0x80) { + pwr |= MCI_PWR_UP; + break; + } case MMC_POWER_ON: pwr |= MCI_PWR_ON; break; } - if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) - pwr |= MCI_ROD; + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) { + if (host->hw_designer != 0x80) + pwr |= MCI_ROD; + else { + /* + * The ST Micro variant use the ROD bit for something + * else and only has OD (Open Drain). + */ + pwr |= MCI_OD; + } + } writel(clk, host->base + MMCICLOCK); @@ -500,6 +514,12 @@ static int mmci_probe(struct amba_device *dev, void *id) } host = mmc_priv(mmc); + /* Bits 12 thru 19 is the designer */ + host->hw_designer = (dev->periphid >> 12) & 0xff; + /* Bits 20 thru 23 is the revison */ + host->hw_revision = (dev->periphid >> 20) & 0xf; + DBG(host, "designer ID = 0x%02x\n", host->hw_designer); + DBG(host, "revision = 0x%01x\n", host->hw_revision); host->clk = clk_get(&dev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); @@ -693,6 +713,15 @@ static struct amba_id mmci_ids[] = { .id = 0x00041181, .mask = 0x000fffff, }, + /* ST Micro variants */ + { + .id = 0x00180180, + .mask = 0x00ffffff, + }, + { + .id = 0x00280180, + .mask = 0x00ffffff, + }, { 0, 0 }, }; diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 0f39c49..0441bac 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -11,13 +11,23 @@ #define MCI_PWR_OFF 0x00 #define MCI_PWR_UP 0x02 #define MCI_PWR_ON 0x03 +#define MCI_DATA2DIREN (1 << 2) +#define MCI_CMDDIREN (1 << 3) +#define MCI_DATA0DIREN (1 << 4) +#define MCI_DATA31DIREN (1 << 5) #define MCI_OD (1 << 6) #define MCI_ROD (1 << 7) +/* The ST Micro version does not have ROD */ +#define MCI_FBCLKEN (1 << 7) +#define MCI_DATA74DIREN (1 << 8) #define MMCICLOCK 0x004 #define MCI_CLK_ENABLE (1 << 8) #define MCI_CLK_PWRSAVE (1 << 9) #define MCI_CLK_BYPASS (1 << 10) +#define MCI_WIDE_BUS (1 << 11) +/* HW flow control on the ST Micro version */ +#define MCI_FCEN (1 << 13) #define MMCIARGUMENT 0x008 #define MMCICOMMAND 0x00c @@ -26,6 +36,10 @@ #define MCI_CPSM_INTERRUPT (1 << 8) #define MCI_CPSM_PENDING (1 << 9) #define MCI_CPSM_ENABLE (1 << 10) +#define MCI_SDIO_SUSP (1 << 11) +#define MCI_ENCMD_COMPL (1 << 12) +#define MCI_NIEN (1 << 13) +#define MCI_CE_ATACMD (1 << 14) #define MMCIRESPCMD 0x010 #define MMCIRESPONSE0 0x014 @@ -39,6 +53,11 @@ #define MCI_DPSM_DIRECTION (1 << 1) #define MCI_DPSM_MODE (1 << 2) #define MCI_DPSM_DMAENABLE (1 << 3) +#define MCI_DPSM_BLOCKSIZE (1 << 4) +#define MCI_DPSM_RWSTART (1 << 8) +#define MCI_DPSM_RWSTOP (1 << 9) +#define MCI_DPSM_RWMOD (1 << 10) +#define MCI_DPSM_SDIOEN (1 << 11) #define MMCIDATACNT 0x030 #define MMCISTATUS 0x034 @@ -63,6 +82,8 @@ #define MCI_RXFIFOEMPTY (1 << 19) #define MCI_TXDATAAVLBL (1 << 20) #define MCI_RXDATAAVLBL (1 << 21) +#define MCI_SDIOIT (1 << 22) +#define MCI_CEATAEND (1 << 23) #define MMCICLEAR 0x038 #define MCI_CMDCRCFAILCLR (1 << 0) @@ -75,6 +96,8 @@ #define MCI_CMDSENTCLR (1 << 7) #define MCI_DATAENDCLR (1 << 8) #define MCI_DATABLOCKENDCLR (1 << 10) +#define MCI_SDIOITC (1 << 22) +#define MCI_CEATAENDC (1 << 23) #define MMCIMASK0 0x03c #define MCI_CMDCRCFAILMASK (1 << 0) @@ -98,6 +121,8 @@ #define MCI_RXFIFOEMPTYMASK (1 << 19) #define MCI_TXDATAAVLBLMASK (1 << 20) #define MCI_RXDATAAVLBLMASK (1 << 21) +#define MCI_SDIOITMASK (1 << 22) +#define MCI_CEATAENDMASK (1 << 23) #define MMCIMASK1 0x040 #define MMCIFIFOCNT 0x048 @@ -136,6 +161,9 @@ struct mmci_host { u32 pwr; struct mmc_platform_data *plat; + u8 hw_designer; + u8 hw_revision:4; + struct timer_list timer; unsigned int oldstat; diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c new file mode 100644 index 0000000..dda0be4 --- /dev/null +++ b/drivers/mmc/host/mxcmmc.c @@ -0,0 +1,880 @@ +/* + * linux/drivers/mmc/host/mxcmmc.c - Freescale i.MX MMCI driver + * + * This is a driver for the SDHC controller found in Freescale MX2/MX3 + * SoCs. It is basically the same hardware as found on MX1 (imxmmc.c). + * Unlike the hardware found on MX1, this hardware just works and does + * not need all the quirks found in imxmmc.c, hence the seperate driver. + * + * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> + * + * derived from pxamci.c by Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/blkdev.h> +#include <linux/dma-mapping.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <asm/dma.h> +#include <asm/irq.h> +#include <asm/sizes.h> +#include <mach/mmc.h> + +#ifdef CONFIG_ARCH_MX2 +#include <mach/dma-mx1-mx2.h> +#define HAS_DMA +#endif + +#define DRIVER_NAME "imx-mmc" + +#define MMC_REG_STR_STP_CLK 0x00 +#define MMC_REG_STATUS 0x04 +#define MMC_REG_CLK_RATE 0x08 +#define MMC_REG_CMD_DAT_CONT 0x0C +#define MMC_REG_RES_TO 0x10 +#define MMC_REG_READ_TO 0x14 +#define MMC_REG_BLK_LEN 0x18 +#define MMC_REG_NOB 0x1C +#define MMC_REG_REV_NO 0x20 +#define MMC_REG_INT_CNTR 0x24 +#define MMC_REG_CMD 0x28 +#define MMC_REG_ARG 0x2C +#define MMC_REG_RES_FIFO 0x34 +#define MMC_REG_BUFFER_ACCESS 0x38 + +#define STR_STP_CLK_RESET (1 << 3) +#define STR_STP_CLK_START_CLK (1 << 1) +#define STR_STP_CLK_STOP_CLK (1 << 0) + +#define STATUS_CARD_INSERTION (1 << 31) +#define STATUS_CARD_REMOVAL (1 << 30) +#define STATUS_YBUF_EMPTY (1 << 29) +#define STATUS_XBUF_EMPTY (1 << 28) +#define STATUS_YBUF_FULL (1 << 27) +#define STATUS_XBUF_FULL (1 << 26) +#define STATUS_BUF_UND_RUN (1 << 25) +#define STATUS_BUF_OVFL (1 << 24) +#define STATUS_SDIO_INT_ACTIVE (1 << 14) +#define STATUS_END_CMD_RESP (1 << 13) +#define STATUS_WRITE_OP_DONE (1 << 12) +#define STATUS_DATA_TRANS_DONE (1 << 11) +#define STATUS_READ_OP_DONE (1 << 11) +#define STATUS_WR_CRC_ERROR_CODE_MASK (3 << 10) +#define STATUS_CARD_BUS_CLK_RUN (1 << 8) +#define STATUS_BUF_READ_RDY (1 << 7) +#define STATUS_BUF_WRITE_RDY (1 << 6) +#define STATUS_RESP_CRC_ERR (1 << 5) +#define STATUS_CRC_READ_ERR (1 << 3) +#define STATUS_CRC_WRITE_ERR (1 << 2) +#define STATUS_TIME_OUT_RESP (1 << 1) +#define STATUS_TIME_OUT_READ (1 << 0) +#define STATUS_ERR_MASK 0x2f + +#define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1 << 12) +#define CMD_DAT_CONT_STOP_READWAIT (1 << 11) +#define CMD_DAT_CONT_START_READWAIT (1 << 10) +#define CMD_DAT_CONT_BUS_WIDTH_4 (2 << 8) +#define CMD_DAT_CONT_INIT (1 << 7) +#define CMD_DAT_CONT_WRITE (1 << 4) +#define CMD_DAT_CONT_DATA_ENABLE (1 << 3) +#define CMD_DAT_CONT_RESPONSE_48BIT_CRC (1 << 0) +#define CMD_DAT_CONT_RESPONSE_136BIT (2 << 0) +#define CMD_DAT_CONT_RESPONSE_48BIT (3 << 0) + +#define INT_SDIO_INT_WKP_EN (1 << 18) +#define INT_CARD_INSERTION_WKP_EN (1 << 17) +#define INT_CARD_REMOVAL_WKP_EN (1 << 16) +#define INT_CARD_INSERTION_EN (1 << 15) +#define INT_CARD_REMOVAL_EN (1 << 14) +#define INT_SDIO_IRQ_EN (1 << 13) +#define INT_DAT0_EN (1 << 12) +#define INT_BUF_READ_EN (1 << 4) +#define INT_BUF_WRITE_EN (1 << 3) +#define INT_END_CMD_RES_EN (1 << 2) +#define INT_WRITE_OP_DONE_EN (1 << 1) +#define INT_READ_OP_EN (1 << 0) + +struct mxcmci_host { + struct mmc_host *mmc; + struct resource *res; + void __iomem *base; + int irq; + int detect_irq; + int dma; + int do_dma; + unsigned int power_mode; + struct imxmmc_platform_data *pdata; + + struct mmc_request *req; + struct mmc_command *cmd; + struct mmc_data *data; + + unsigned int dma_nents; + unsigned int datasize; + unsigned int dma_dir; + + u16 rev_no; + unsigned int cmdat; + + struct clk *clk; + + int clock; + + struct work_struct datawork; +}; + +static inline int mxcmci_use_dma(struct mxcmci_host *host) +{ + return host->do_dma; +} + +static void mxcmci_softreset(struct mxcmci_host *host) +{ + int i; + + /* reset sequence */ + writew(STR_STP_CLK_RESET, host->base + MMC_REG_STR_STP_CLK); + writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK, + host->base + MMC_REG_STR_STP_CLK); + + for (i = 0; i < 8; i++) + writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); + + writew(0xff, host->base + MMC_REG_RES_TO); +} + +static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) +{ + unsigned int nob = data->blocks; + unsigned int blksz = data->blksz; + unsigned int datasize = nob * blksz; +#ifdef HAS_DMA + struct scatterlist *sg; + int i; +#endif + if (data->flags & MMC_DATA_STREAM) + nob = 0xffff; + + host->data = data; + data->bytes_xfered = 0; + + writew(nob, host->base + MMC_REG_NOB); + writew(blksz, host->base + MMC_REG_BLK_LEN); + host->datasize = datasize; + +#ifdef HAS_DMA + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->offset & 3 || sg->length & 3) { + host->do_dma = 0; + return; + } + } + + if (data->flags & MMC_DATA_READ) { + host->dma_dir = DMA_FROM_DEVICE; + host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, host->dma_dir); + + imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize, + host->res->start + MMC_REG_BUFFER_ACCESS, + DMA_MODE_READ); + } else { + host->dma_dir = DMA_TO_DEVICE; + host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, host->dma_dir); + + imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize, + host->res->start + MMC_REG_BUFFER_ACCESS, + DMA_MODE_WRITE); + } + + wmb(); + + imx_dma_enable(host->dma); +#endif /* HAS_DMA */ +} + +static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd, + unsigned int cmdat) +{ + WARN_ON(host->cmd != NULL); + host->cmd = cmd; + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_R1: /* short CRC, OPCODE */ + case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */ + cmdat |= CMD_DAT_CONT_RESPONSE_48BIT_CRC; + break; + case MMC_RSP_R2: /* long 136 bit + CRC */ + cmdat |= CMD_DAT_CONT_RESPONSE_136BIT; + break; + case MMC_RSP_R3: /* short */ + cmdat |= CMD_DAT_CONT_RESPONSE_48BIT; + break; + case MMC_RSP_NONE: + break; + default: + dev_err(mmc_dev(host->mmc), "unhandled response type 0x%x\n", + mmc_resp_type(cmd)); + cmd->error = -EINVAL; + return -EINVAL; + } + + if (mxcmci_use_dma(host)) + writel(INT_READ_OP_EN | INT_WRITE_OP_DONE_EN | + INT_END_CMD_RES_EN, + host->base + MMC_REG_INT_CNTR); + else + writel(INT_END_CMD_RES_EN, host->base + MMC_REG_INT_CNTR); + + writew(cmd->opcode, host->base + MMC_REG_CMD); + writel(cmd->arg, host->base + MMC_REG_ARG); + writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT); + + return 0; +} + +static void mxcmci_finish_request(struct mxcmci_host *host, + struct mmc_request *req) +{ + writel(0, host->base + MMC_REG_INT_CNTR); + + host->req = NULL; + host->cmd = NULL; + host->data = NULL; + + mmc_request_done(host->mmc, req); +} + +static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat) +{ + struct mmc_data *data = host->data; + int data_error; + +#ifdef HAS_DMA + if (mxcmci_use_dma(host)) { + imx_dma_disable(host->dma); + dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents, + host->dma_dir); + } +#endif + + if (stat & STATUS_ERR_MASK) { + dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n", + stat); + if (stat & STATUS_CRC_READ_ERR) { + data->error = -EILSEQ; + } else if (stat & STATUS_CRC_WRITE_ERR) { + u32 err_code = (stat >> 9) & 0x3; + if (err_code == 2) /* No CRC response */ + data->error = -ETIMEDOUT; + else + data->error = -EILSEQ; + } else if (stat & STATUS_TIME_OUT_READ) { + data->error = -ETIMEDOUT; + } else { + data->error = -EIO; + } + } else { + data->bytes_xfered = host->datasize; + } + + data_error = data->error; + + host->data = NULL; + + return data_error; +} + +static void mxcmci_read_response(struct mxcmci_host *host, unsigned int stat) +{ + struct mmc_command *cmd = host->cmd; + int i; + u32 a, b, c; + + if (!cmd) + return; + + if (stat & STATUS_TIME_OUT_RESP) { + dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n"); + cmd->error = -ETIMEDOUT; + } else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) { + dev_dbg(mmc_dev(host->mmc), "cmd crc error\n"); + cmd->error = -EILSEQ; + } + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + for (i = 0; i < 4; i++) { + a = readw(host->base + MMC_REG_RES_FIFO); + b = readw(host->base + MMC_REG_RES_FIFO); + cmd->resp[i] = a << 16 | b; + } + } else { + a = readw(host->base + MMC_REG_RES_FIFO); + b = readw(host->base + MMC_REG_RES_FIFO); + c = readw(host->base + MMC_REG_RES_FIFO); + cmd->resp[0] = a << 24 | b << 8 | c >> 8; + } + } +} + +static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask) +{ + u32 stat; + unsigned long timeout = jiffies + HZ; + + do { + stat = readl(host->base + MMC_REG_STATUS); + if (stat & STATUS_ERR_MASK) + return stat; + if (time_after(jiffies, timeout)) + return STATUS_TIME_OUT_READ; + if (stat & mask) + return 0; + cpu_relax(); + } while (1); +} + +static int mxcmci_pull(struct mxcmci_host *host, void *_buf, int bytes) +{ + unsigned int stat; + u32 *buf = _buf; + + while (bytes > 3) { + stat = mxcmci_poll_status(host, + STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE); + if (stat) + return stat; + *buf++ = readl(host->base + MMC_REG_BUFFER_ACCESS); + bytes -= 4; + } + + if (bytes) { + u8 *b = (u8 *)buf; + u32 tmp; + + stat = mxcmci_poll_status(host, + STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE); + if (stat) + return stat; + tmp = readl(host->base + MMC_REG_BUFFER_ACCESS); + memcpy(b, &tmp, bytes); + } + + return 0; +} + +static int mxcmci_push(struct mxcmci_host *host, void *_buf, int bytes) +{ + unsigned int stat; + u32 *buf = _buf; + + while (bytes > 3) { + stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY); + if (stat) + return stat; + writel(*buf++, host->base + MMC_REG_BUFFER_ACCESS); + bytes -= 4; + } + + if (bytes) { + u8 *b = (u8 *)buf; + u32 tmp; + + stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY); + if (stat) + return stat; + + memcpy(&tmp, b, bytes); + writel(tmp, host->base + MMC_REG_BUFFER_ACCESS); + } + + stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY); + if (stat) + return stat; + + return 0; +} + +static int mxcmci_transfer_data(struct mxcmci_host *host) +{ + struct mmc_data *data = host->req->data; + struct scatterlist *sg; + int stat, i; + + host->datasize = 0; + + host->data = data; + host->datasize = 0; + + if (data->flags & MMC_DATA_READ) { + for_each_sg(data->sg, sg, data->sg_len, i) { + stat = mxcmci_pull(host, sg_virt(sg), sg->length); + if (stat) + return stat; + host->datasize += sg->length; + } + } else { + for_each_sg(data->sg, sg, data->sg_len, i) { + stat = mxcmci_push(host, sg_virt(sg), sg->length); + if (stat) + return stat; + host->datasize += sg->length; + } + stat = mxcmci_poll_status(host, STATUS_WRITE_OP_DONE); + if (stat) + return stat; + } + return 0; +} + +static void mxcmci_datawork(struct work_struct *work) +{ + struct mxcmci_host *host = container_of(work, struct mxcmci_host, + datawork); + int datastat = mxcmci_transfer_data(host); + mxcmci_finish_data(host, datastat); + + if (host->req->stop) { + if (mxcmci_start_cmd(host, host->req->stop, 0)) { + mxcmci_finish_request(host, host->req); + return; + } + } else { + mxcmci_finish_request(host, host->req); + } +} + +#ifdef HAS_DMA +static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat) +{ + struct mmc_data *data = host->data; + int data_error; + + if (!data) + return; + + data_error = mxcmci_finish_data(host, stat); + + mxcmci_read_response(host, stat); + host->cmd = NULL; + + if (host->req->stop) { + if (mxcmci_start_cmd(host, host->req->stop, 0)) { + mxcmci_finish_request(host, host->req); + return; + } + } else { + mxcmci_finish_request(host, host->req); + } +} +#endif /* HAS_DMA */ + +static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat) +{ + mxcmci_read_response(host, stat); + host->cmd = NULL; + + if (!host->data && host->req) { + mxcmci_finish_request(host, host->req); + return; + } + + /* For the DMA case the DMA engine handles the data transfer + * automatically. For non DMA we have to to it ourselves. + * Don't do it in interrupt context though. + */ + if (!mxcmci_use_dma(host) && host->data) + schedule_work(&host->datawork); + +} + +static irqreturn_t mxcmci_irq(int irq, void *devid) +{ + struct mxcmci_host *host = devid; + u32 stat; + + stat = readl(host->base + MMC_REG_STATUS); + writel(stat, host->base + MMC_REG_STATUS); + + dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat); + + if (stat & STATUS_END_CMD_RESP) + mxcmci_cmd_done(host, stat); +#ifdef HAS_DMA + if (mxcmci_use_dma(host) && + (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE))) + mxcmci_data_done(host, stat); +#endif + return IRQ_HANDLED; +} + +static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req) +{ + struct mxcmci_host *host = mmc_priv(mmc); + unsigned int cmdat = host->cmdat; + + WARN_ON(host->req != NULL); + + host->req = req; + host->cmdat &= ~CMD_DAT_CONT_INIT; +#ifdef HAS_DMA + host->do_dma = 1; +#endif + if (req->data) { + mxcmci_setup_data(host, req->data); + + cmdat |= CMD_DAT_CONT_DATA_ENABLE; + + if (req->data->flags & MMC_DATA_WRITE) + cmdat |= CMD_DAT_CONT_WRITE; + } + + if (mxcmci_start_cmd(host, req->cmd, cmdat)) + mxcmci_finish_request(host, req); +} + +static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios) +{ + unsigned int divider; + int prescaler = 0; + unsigned int clk_in = clk_get_rate(host->clk); + + while (prescaler <= 0x800) { + for (divider = 1; divider <= 0xF; divider++) { + int x; + + x = (clk_in / (divider + 1)); + + if (prescaler) + x /= (prescaler * 2); + + if (x <= clk_ios) + break; + } + if (divider < 0x10) + break; + + if (prescaler == 0) + prescaler = 1; + else + prescaler <<= 1; + } + + writew((prescaler << 4) | divider, host->base + MMC_REG_CLK_RATE); + + dev_dbg(mmc_dev(host->mmc), "scaler: %d divider: %d in: %d out: %d\n", + prescaler, divider, clk_in, clk_ios); +} + +static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct mxcmci_host *host = mmc_priv(mmc); +#ifdef HAS_DMA + unsigned int blen; + /* + * use burstlen of 64 in 4 bit mode (--> reg value 0) + * use burstlen of 16 in 1 bit mode (--> reg value 16) + */ + if (ios->bus_width == MMC_BUS_WIDTH_4) + blen = 0; + else + blen = 16; + + imx_dma_config_burstlen(host->dma, blen); +#endif + if (ios->bus_width == MMC_BUS_WIDTH_4) + host->cmdat |= CMD_DAT_CONT_BUS_WIDTH_4; + else + host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4; + + if (host->power_mode != ios->power_mode) { + if (host->pdata && host->pdata->setpower) + host->pdata->setpower(mmc_dev(mmc), ios->vdd); + host->power_mode = ios->power_mode; + if (ios->power_mode == MMC_POWER_ON) + host->cmdat |= CMD_DAT_CONT_INIT; + } + + if (ios->clock) { + mxcmci_set_clk_rate(host, ios->clock); + writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); + } else { + writew(STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK); + } + + host->clock = ios->clock; +} + +static irqreturn_t mxcmci_detect_irq(int irq, void *data) +{ + struct mmc_host *mmc = data; + + dev_dbg(mmc_dev(mmc), "%s\n", __func__); + + mmc_detect_change(mmc, msecs_to_jiffies(250)); + return IRQ_HANDLED; +} + +static int mxcmci_get_ro(struct mmc_host *mmc) +{ + struct mxcmci_host *host = mmc_priv(mmc); + + if (host->pdata && host->pdata->get_ro) + return !!host->pdata->get_ro(mmc_dev(mmc)); + /* + * Board doesn't support read only detection; let the mmc core + * decide what to do. + */ + return -ENOSYS; +} + + +static const struct mmc_host_ops mxcmci_ops = { + .request = mxcmci_request, + .set_ios = mxcmci_set_ios, + .get_ro = mxcmci_get_ro, +}; + +static int mxcmci_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct mxcmci_host *host = NULL; + struct resource *r; + int ret = 0, irq; + + printk(KERN_INFO "i.MX SDHC driver\n"); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (!r || irq < 0) + return -EINVAL; + + r = request_mem_region(r->start, resource_size(r), pdev->name); + if (!r) + return -EBUSY; + + mmc = mmc_alloc_host(sizeof(struct mxcmci_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto out_release_mem; + } + + mmc->ops = &mxcmci_ops; + mmc->caps = MMC_CAP_4_BIT_DATA; + + /* MMC core transfer sizes tunable parameters */ + mmc->max_hw_segs = 64; + mmc->max_phys_segs = 64; + mmc->max_blk_size = 2048; + mmc->max_blk_count = 65535; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_seg_size; + + host = mmc_priv(mmc); + host->base = ioremap(r->start, resource_size(r)); + if (!host->base) { + ret = -ENOMEM; + goto out_free; + } + + host->mmc = mmc; + host->pdata = pdev->dev.platform_data; + + if (host->pdata && host->pdata->ocr_avail) + mmc->ocr_avail = host->pdata->ocr_avail; + else + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + + host->res = r; + host->irq = irq; + + host->clk = clk_get(&pdev->dev, "sdhc_clk"); + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); + goto out_iounmap; + } + clk_enable(host->clk); + + mxcmci_softreset(host); + + host->rev_no = readw(host->base + MMC_REG_REV_NO); + if (host->rev_no != 0x400) { + ret = -ENODEV; + dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n", + host->rev_no); + goto out_clk_put; + } + + mmc->f_min = clk_get_rate(host->clk) >> 7; + mmc->f_max = clk_get_rate(host->clk) >> 1; + + /* recommended in data sheet */ + writew(0x2db4, host->base + MMC_REG_READ_TO); + + writel(0, host->base + MMC_REG_INT_CNTR); + +#ifdef HAS_DMA + host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW); + if (host->dma < 0) { + dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n"); + ret = -EBUSY; + goto out_clk_put; + } + + r = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!r) { + ret = -EINVAL; + goto out_free_dma; + } + + ret = imx_dma_config_channel(host->dma, + IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO, + IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR, + r->start, 0); + if (ret) { + dev_err(mmc_dev(host->mmc), "failed to config DMA channel\n"); + goto out_free_dma; + } +#endif + INIT_WORK(&host->datawork, mxcmci_datawork); + + ret = request_irq(host->irq, mxcmci_irq, 0, DRIVER_NAME, host); + if (ret) + goto out_free_dma; + + platform_set_drvdata(pdev, mmc); + + if (host->pdata && host->pdata->init) { + ret = host->pdata->init(&pdev->dev, mxcmci_detect_irq, + host->mmc); + if (ret) + goto out_free_irq; + } + + mmc_add_host(mmc); + + return 0; + +out_free_irq: + free_irq(host->irq, host); +out_free_dma: +#ifdef HAS_DMA + imx_dma_free(host->dma); +#endif +out_clk_put: + clk_disable(host->clk); + clk_put(host->clk); +out_iounmap: + iounmap(host->base); +out_free: + mmc_free_host(mmc); +out_release_mem: + release_mem_region(host->res->start, resource_size(host->res)); + return ret; +} + +static int mxcmci_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct mxcmci_host *host = mmc_priv(mmc); + + platform_set_drvdata(pdev, NULL); + + mmc_remove_host(mmc); + + if (host->pdata && host->pdata->exit) + host->pdata->exit(&pdev->dev, mmc); + + free_irq(host->irq, host); + iounmap(host->base); +#ifdef HAS_DMA + imx_dma_free(host->dma); +#endif + clk_disable(host->clk); + clk_put(host->clk); + + release_mem_region(host->res->start, resource_size(host->res)); + release_resource(host->res); + + mmc_free_host(mmc); + + return 0; +} + +#ifdef CONFIG_PM +static int mxcmci_suspend(struct platform_device *dev, pm_message_t state) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + int ret = 0; + + if (mmc) + ret = mmc_suspend_host(mmc, state); + + return ret; +} + +static int mxcmci_resume(struct platform_device *dev) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + struct mxcmci_host *host; + int ret = 0; + + if (mmc) { + host = mmc_priv(mmc); + ret = mmc_resume_host(mmc); + } + + return ret; +} +#else +#define mxcmci_suspend NULL +#define mxcmci_resume NULL +#endif /* CONFIG_PM */ + +static struct platform_driver mxcmci_driver = { + .probe = mxcmci_probe, + .remove = mxcmci_remove, + .suspend = mxcmci_suspend, + .resume = mxcmci_resume, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + } +}; + +static int __init mxcmci_init(void) +{ + return platform_driver_register(&mxcmci_driver); +} + +static void __exit mxcmci_exit(void) +{ + platform_driver_unregister(&mxcmci_driver); +} + +module_init(mxcmci_init); +module_exit(mxcmci_exit); + +MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver"); +MODULE_AUTHOR("Sascha Hauer, Pengutronix"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:imx-mmc"); diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 3c5483b..9702ad3 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -180,7 +180,15 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) else DALGN &= ~(1 << host->dma); DDADR(host->dma) = host->sg_dma; - DCSR(host->dma) = DCSR_RUN; + + /* + * workaround for erratum #91: + * only start DMA now if we are doing a read, + * otherwise we wait until CMD/RESP has finished + * before starting DMA. + */ + if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ) + DCSR(host->dma) = DCSR_RUN; } static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat) @@ -251,23 +259,28 @@ static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat) if (stat & STAT_TIME_OUT_RESPONSE) { cmd->error = -ETIMEDOUT; } else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) { -#ifdef CONFIG_PXA27x /* * workaround for erratum #42: * Intel PXA27x Family Processor Specification Update Rev 001 * A bogus CRC error can appear if the msb of a 136 bit * response is a one. */ - if (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000) { + if (cpu_is_pxa27x() && + (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000)) pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode); - } else -#endif - cmd->error = -EILSEQ; + else + cmd->error = -EILSEQ; } pxamci_disable_irq(host, END_CMD_RES); if (host->data && !cmd->error) { pxamci_enable_irq(host, DATA_TRAN_DONE); + /* + * workaround for erratum #91, if doing write + * enable DMA late + */ + if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE) + DCSR(host->dma) = DCSR_RUN; } else { pxamci_finish_request(host, host->mrq); } diff --git a/drivers/mmc/host/ricoh_mmc.c b/drivers/mmc/host/ricoh_mmc.c index be9e7b3..f627905 100644 --- a/drivers/mmc/host/ricoh_mmc.c +++ b/drivers/mmc/host/ricoh_mmc.c @@ -196,7 +196,7 @@ static void __devexit ricoh_mmc_remove(struct pci_dev *pdev) pci_set_drvdata(pdev, NULL); } -static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state) +static int ricoh_mmc_suspend_late(struct pci_dev *pdev, pm_message_t state) { struct pci_dev *fw_dev = NULL; @@ -210,7 +210,7 @@ static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state) return 0; } -static int ricoh_mmc_resume(struct pci_dev *pdev) +static int ricoh_mmc_resume_early(struct pci_dev *pdev) { struct pci_dev *fw_dev = NULL; @@ -229,8 +229,8 @@ static struct pci_driver ricoh_mmc_driver = { .id_table = pci_ids, .probe = ricoh_mmc_probe, .remove = __devexit_p(ricoh_mmc_remove), - .suspend = ricoh_mmc_suspend, - .resume = ricoh_mmc_resume, + .suspend_late = ricoh_mmc_suspend_late, + .resume_early = ricoh_mmc_resume_early, }; /*****************************************************************************\ diff --git a/drivers/mtd/ubi/Kconfig.debug b/drivers/mtd/ubi/Kconfig.debug index 1e2ee22..2246f15 100644 --- a/drivers/mtd/ubi/Kconfig.debug +++ b/drivers/mtd/ubi/Kconfig.debug @@ -33,16 +33,6 @@ config MTD_UBI_DEBUG_DISABLE_BGT This option switches the background thread off by default. The thread may be also be enabled/disabled via UBI sysfs. -config MTD_UBI_DEBUG_USERSPACE_IO - bool "Direct user-space write/erase support" - default n - depends on MTD_UBI_DEBUG - help - By default, users cannot directly write and erase individual - eraseblocks of dynamic volumes, and have to use update operation - instead. This option enables this capability - it is very useful for - debugging and testing. - config MTD_UBI_DEBUG_EMULATE_BITFLIPS bool "Emulate flash bit-flips" depends on MTD_UBI_DEBUG diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 9082768..4048db8 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -263,8 +263,12 @@ static ssize_t dev_attribute_show(struct device *dev, return ret; } -/* Fake "release" method for UBI devices */ -static void dev_release(struct device *dev) { } +static void dev_release(struct device *dev) +{ + struct ubi_device *ubi = container_of(dev, struct ubi_device, dev); + + kfree(ubi); +} /** * ubi_sysfs_init - initialize sysfs for an UBI device. @@ -380,7 +384,7 @@ static void free_user_volumes(struct ubi_device *ubi) */ static int uif_init(struct ubi_device *ubi) { - int i, err, do_free = 0; + int i, err; dev_t dev; sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num); @@ -427,13 +431,10 @@ static int uif_init(struct ubi_device *ubi) out_volumes: kill_volumes(ubi); - do_free = 0; out_sysfs: ubi_sysfs_close(ubi); cdev_del(&ubi->cdev); out_unreg: - if (do_free) - free_user_volumes(ubi); unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1); ubi_err("cannot initialize UBI %s, error %d", ubi->ubi_name, err); return err; @@ -947,6 +948,12 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) if (ubi->bgt_thread) kthread_stop(ubi->bgt_thread); + /* + * Get a reference to the device in order to prevent 'dev_release()' + * from freeing @ubi object. + */ + get_device(&ubi->dev); + uif_close(ubi); ubi_wl_close(ubi); free_internal_volumes(ubi); @@ -958,7 +965,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) vfree(ubi->dbg_peb_buf); #endif ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num); - kfree(ubi); + put_device(&ubi->dev); return 0; } diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 98cf31e..e63c8fc 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -40,9 +40,9 @@ #include <linux/ioctl.h> #include <linux/capability.h> #include <linux/uaccess.h> -#include <linux/smp_lock.h> +#include <linux/compat.h> +#include <linux/math64.h> #include <mtd/ubi-user.h> -#include <asm/div64.h> #include "ubi.h" /** @@ -195,7 +195,6 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, int err, lnum, off, len, tbuf_size; size_t count_save = count; void *tbuf; - uint64_t tmp; dbg_gen("read %zd bytes from offset %lld of volume %d", count, *offp, vol->vol_id); @@ -225,10 +224,7 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, return -ENOMEM; len = count > tbuf_size ? tbuf_size : count; - - tmp = *offp; - off = do_div(tmp, vol->usable_leb_size); - lnum = tmp; + lnum = div_u64_rem(*offp, vol->usable_leb_size, &off); do { cond_resched(); @@ -263,12 +259,9 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, return err ? err : count_save - count; } -#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO - /* * This function allows to directly write to dynamic UBI volumes, without - * issuing the volume update operation. Available only as a debugging feature. - * Very useful for testing UBI. + * issuing the volume update operation. */ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, size_t count, loff_t *offp) @@ -279,7 +272,9 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, int lnum, off, len, tbuf_size, err = 0; size_t count_save = count; char *tbuf; - uint64_t tmp; + + if (!vol->direct_writes) + return -EPERM; dbg_gen("requested: write %zd bytes to offset %lld of volume %u", count, *offp, vol->vol_id); @@ -287,10 +282,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, if (vol->vol_type == UBI_STATIC_VOLUME) return -EROFS; - tmp = *offp; - off = do_div(tmp, vol->usable_leb_size); - lnum = tmp; - + lnum = div_u64_rem(*offp, vol->usable_leb_size, &off); if (off & (ubi->min_io_size - 1)) { dbg_err("unaligned position"); return -EINVAL; @@ -347,10 +339,6 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, return err ? err : count_save - count; } -#else -#define vol_cdev_direct_write(file, buf, count, offp) (-EPERM) -#endif /* CONFIG_MTD_UBI_DEBUG_USERSPACE_IO */ - static ssize_t vol_cdev_write(struct file *file, const char __user *buf, size_t count, loff_t *offp) { @@ -402,8 +390,8 @@ static ssize_t vol_cdev_write(struct file *file, const char __user *buf, return count; } -static int vol_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long vol_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; struct ubi_volume_desc *desc = file->private_data; @@ -487,7 +475,6 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, break; } -#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO /* Logical eraseblock erasure command */ case UBI_IOCEBER: { @@ -518,13 +505,77 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_wl_flush(ubi); break; } -#endif + + /* Logical eraseblock map command */ + case UBI_IOCEBMAP: + { + struct ubi_map_req req; + + err = copy_from_user(&req, argp, sizeof(struct ubi_map_req)); + if (err) { + err = -EFAULT; + break; + } + err = ubi_leb_map(desc, req.lnum, req.dtype); + break; + } + + /* Logical eraseblock un-map command */ + case UBI_IOCEBUNMAP: + { + int32_t lnum; + + err = get_user(lnum, (__user int32_t *)argp); + if (err) { + err = -EFAULT; + break; + } + err = ubi_leb_unmap(desc, lnum); + break; + } + + /* Check if logical eraseblock is mapped command */ + case UBI_IOCEBISMAP: + { + int32_t lnum; + + err = get_user(lnum, (__user int32_t *)argp); + if (err) { + err = -EFAULT; + break; + } + err = ubi_is_mapped(desc, lnum); + break; + } + + /* Set volume property command*/ + case UBI_IOCSETPROP: + { + struct ubi_set_prop_req req; + + err = copy_from_user(&req, argp, + sizeof(struct ubi_set_prop_req)); + if (err) { + err = -EFAULT; + break; + } + switch (req.property) { + case UBI_PROP_DIRECT_WRITE: + mutex_lock(&ubi->volumes_mutex); + desc->vol->direct_writes = !!req.value; + mutex_unlock(&ubi->volumes_mutex); + break; + default: + err = -EINVAL; + break; + } + break; + } default: err = -ENOTTY; break; } - return err; } @@ -762,8 +813,8 @@ out_free: return err; } -static int ubi_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; struct ubi_device *ubi; @@ -773,7 +824,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, if (!capable(CAP_SYS_RESOURCE)) return -EPERM; - ubi = ubi_get_by_major(imajor(inode)); + ubi = ubi_get_by_major(imajor(file->f_mapping->host)); if (!ubi) return -ENODEV; @@ -843,7 +894,6 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, case UBI_IOCRSVOL: { int pebs; - uint64_t tmp; struct ubi_rsvol_req req; dbg_gen("re-size volume"); @@ -863,9 +913,8 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, break; } - tmp = req.bytes; - pebs = !!do_div(tmp, desc->vol->usable_leb_size); - pebs += tmp; + pebs = div_u64(req.bytes + desc->vol->usable_leb_size - 1, + desc->vol->usable_leb_size); mutex_lock(&ubi->volumes_mutex); err = ubi_resize_volume(desc, pebs); @@ -909,8 +958,8 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, return err; } -static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; void __user *argp = (void __user *)arg; @@ -986,26 +1035,59 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, return err; } -/* UBI control character device operations */ -struct file_operations ubi_ctrl_cdev_operations = { - .ioctl = ctrl_cdev_ioctl, - .owner = THIS_MODULE, +#ifdef CONFIG_COMPAT +static long vol_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return vol_cdev_ioctl(file, cmd, translated_arg); +} + +static long ubi_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return ubi_cdev_ioctl(file, cmd, translated_arg); +} + +static long ctrl_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return ctrl_cdev_ioctl(file, cmd, translated_arg); +} +#else +#define vol_cdev_compat_ioctl NULL +#define ubi_cdev_compat_ioctl NULL +#define ctrl_cdev_compat_ioctl NULL +#endif + +/* UBI volume character device operations */ +const struct file_operations ubi_vol_cdev_operations = { + .owner = THIS_MODULE, + .open = vol_cdev_open, + .release = vol_cdev_release, + .llseek = vol_cdev_llseek, + .read = vol_cdev_read, + .write = vol_cdev_write, + .unlocked_ioctl = vol_cdev_ioctl, + .compat_ioctl = vol_cdev_compat_ioctl, }; /* UBI character device operations */ -struct file_operations ubi_cdev_operations = { - .owner = THIS_MODULE, - .ioctl = ubi_cdev_ioctl, - .llseek = no_llseek, +const struct file_operations ubi_cdev_operations = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = ubi_cdev_ioctl, + .compat_ioctl = ubi_cdev_compat_ioctl, }; -/* UBI volume character device operations */ -struct file_operations ubi_vol_cdev_operations = { - .owner = THIS_MODULE, - .open = vol_cdev_open, - .release = vol_cdev_release, - .llseek = vol_cdev_llseek, - .read = vol_cdev_read, - .write = vol_cdev_write, - .ioctl = vol_cdev_ioctl, +/* UBI control character device operations */ +const struct file_operations ubi_ctrl_cdev_operations = { + .owner = THIS_MODULE, + .unlocked_ioctl = ctrl_cdev_ioctl, + .compat_ioctl = ctrl_cdev_compat_ioctl, }; diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index 6dd4f5e..49cd55a 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -28,7 +28,7 @@ * eraseblock size is equivalent to the logical eraseblock size of the volume. */ -#include <asm/div64.h> +#include <linux/math64.h> #include "ubi.h" /** @@ -109,7 +109,6 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, int err = 0, lnum, offs, total_read; struct ubi_volume *vol; struct ubi_device *ubi; - uint64_t tmp = from; dbg_gen("read %zd bytes from offset %lld", len, from); @@ -119,9 +118,7 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, vol = container_of(mtd, struct ubi_volume, gluebi_mtd); ubi = vol->ubi; - offs = do_div(tmp, mtd->erasesize); - lnum = tmp; - + lnum = div_u64_rem(from, mtd->erasesize, &offs); total_read = len; while (total_read) { size_t to_read = mtd->erasesize - offs; @@ -160,7 +157,6 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, int err = 0, lnum, offs, total_written; struct ubi_volume *vol; struct ubi_device *ubi; - uint64_t tmp = to; dbg_gen("write %zd bytes to offset %lld", len, to); @@ -173,8 +169,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, if (ubi->ro_mode) return -EROFS; - offs = do_div(tmp, mtd->erasesize); - lnum = tmp; + lnum = div_u64_rem(to, mtd->erasesize, &offs); if (len % mtd->writesize || offs % mtd->writesize) return -EINVAL; diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index ecde202..c3d653b 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -42,7 +42,7 @@ #include <linux/err.h> #include <linux/crc32.h> -#include <asm/div64.h> +#include <linux/math64.h> #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -904,10 +904,8 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi) dbg_msg("scanning is finished"); /* Calculate mean erase counter */ - if (si->ec_count) { - do_div(si->ec_sum, si->ec_count); - si->mean_ec = si->ec_sum; - } + if (si->ec_count) + si->mean_ec = div_u64(si->ec_sum, si->ec_count); if (si->is_empty) ubi_msg("empty MTD device detected"); diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 4a8ec48..c055511 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -206,6 +206,7 @@ struct ubi_volume_desc; * @upd_marker: %1 if the update marker is set for this volume * @updating: %1 if the volume is being updated * @changing_leb: %1 if the atomic LEB change ioctl command is in progress + * @direct_writes: %1 if direct writes are enabled for this volume * * @gluebi_desc: gluebi UBI volume descriptor * @gluebi_refcount: reference count of the gluebi MTD device @@ -253,6 +254,7 @@ struct ubi_volume { unsigned int upd_marker:1; unsigned int updating:1; unsigned int changing_leb:1; + unsigned int direct_writes:1; #ifdef CONFIG_MTD_UBI_GLUEBI /* @@ -304,7 +306,8 @@ struct ubi_wl_entry; * @vtbl_size: size of the volume table in bytes * @vtbl: in-RAM volume table copy * @volumes_mutex: protects on-flash volume table and serializes volume - * changes, like creation, deletion, update, re-size and re-name + * changes, like creation, deletion, update, re-size, + * re-name and set property * * @max_ec: current highest erase counter value * @mean_ec: current mean erase counter value @@ -449,9 +452,9 @@ struct ubi_device { }; extern struct kmem_cache *ubi_wl_entry_slab; -extern struct file_operations ubi_ctrl_cdev_operations; -extern struct file_operations ubi_cdev_operations; -extern struct file_operations ubi_vol_cdev_operations; +extern const struct file_operations ubi_ctrl_cdev_operations; +extern const struct file_operations ubi_cdev_operations; +extern const struct file_operations ubi_vol_cdev_operations; extern struct class *ubi_class; extern struct mutex ubi_devices_mutex; diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c index 8b89cc1..6b4d1ae 100644 --- a/drivers/mtd/ubi/upd.c +++ b/drivers/mtd/ubi/upd.c @@ -40,7 +40,7 @@ #include <linux/err.h> #include <linux/uaccess.h> -#include <asm/div64.h> +#include <linux/math64.h> #include "ubi.h" /** @@ -89,7 +89,6 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol, long long bytes) { int err; - uint64_t tmp; struct ubi_vtbl_record vtbl_rec; dbg_gen("clear update marker for volume %d", vol->vol_id); @@ -101,9 +100,9 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol, if (vol->vol_type == UBI_STATIC_VOLUME) { vol->corrupted = 0; - vol->used_bytes = tmp = bytes; - vol->last_eb_bytes = do_div(tmp, vol->usable_leb_size); - vol->used_ebs = tmp; + vol->used_bytes = bytes; + vol->used_ebs = div_u64_rem(bytes, vol->usable_leb_size, + &vol->last_eb_bytes); if (vol->last_eb_bytes) vol->used_ebs += 1; else @@ -131,7 +130,6 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, long long bytes) { int i, err; - uint64_t tmp; dbg_gen("start update of volume %d, %llu bytes", vol->vol_id, bytes); ubi_assert(!vol->updating && !vol->changing_leb); @@ -161,9 +159,8 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, if (!vol->upd_buf) return -ENOMEM; - tmp = bytes; - vol->upd_ebs = !!do_div(tmp, vol->usable_leb_size); - vol->upd_ebs += tmp; + vol->upd_ebs = div_u64(bytes + vol->usable_leb_size - 1, + vol->usable_leb_size); vol->upd_bytes = bytes; vol->upd_received = 0; return 0; @@ -282,7 +279,6 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum, int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, const void __user *buf, int count) { - uint64_t tmp; int lnum, offs, err = 0, len, to_write = count; dbg_gen("write %d of %lld bytes, %lld already passed", @@ -291,10 +287,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, if (ubi->ro_mode) return -EROFS; - tmp = vol->upd_received; - offs = do_div(tmp, vol->usable_leb_size); - lnum = tmp; - + lnum = div_u64_rem(vol->upd_received, vol->usable_leb_size, &offs); if (vol->upd_received + count > vol->upd_bytes) to_write = count = vol->upd_bytes - vol->upd_received; diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c index 22e1d73..df54835 100644 --- a/drivers/mtd/ubi/vmt.c +++ b/drivers/mtd/ubi/vmt.c @@ -24,7 +24,7 @@ */ #include <linux/err.h> -#include <asm/div64.h> +#include <linux/math64.h> #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -205,7 +205,6 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) int i, err, vol_id = req->vol_id, do_free = 1; struct ubi_volume *vol; struct ubi_vtbl_record vtbl_rec; - uint64_t bytes; dev_t dev; if (ubi->ro_mode) @@ -255,10 +254,8 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) /* Calculate how many eraseblocks are requested */ vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment; - bytes = req->bytes; - if (do_div(bytes, vol->usable_leb_size)) - vol->reserved_pebs = 1; - vol->reserved_pebs += bytes; + vol->reserved_pebs += div_u64(req->bytes + vol->usable_leb_size - 1, + vol->usable_leb_size); /* Reserve physical eraseblocks */ if (vol->reserved_pebs > ubi->avail_pebs) { @@ -301,10 +298,10 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) vol->used_bytes = (long long)vol->used_ebs * vol->usable_leb_size; } else { - bytes = vol->used_bytes; - vol->last_eb_bytes = do_div(bytes, vol->usable_leb_size); - vol->used_ebs = bytes; - if (vol->last_eb_bytes) + vol->used_ebs = div_u64_rem(vol->used_bytes, + vol->usable_leb_size, + &vol->last_eb_bytes); + if (vol->last_eb_bytes != 0) vol->used_ebs += 1; else vol->last_eb_bytes = vol->usable_leb_size; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 26474c9..c986978 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -31,7 +31,7 @@ char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; -#define DRV_VERSION "7.3.20-k3-NAPI" +#define DRV_VERSION "7.3.21-k3-NAPI" const char e1000_driver_version[] = DRV_VERSION; static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -3712,7 +3712,7 @@ static irqreturn_t e1000_intr(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 rctl, icr = er32(ICR); - if (unlikely(!icr)) + if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags))) return IRQ_NONE; /* Not our interrupt */ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c index f3706e4..f49a426 100644 --- a/drivers/net/gianfar_mii.c +++ b/drivers/net/gianfar_mii.c @@ -234,6 +234,8 @@ static int gfar_mdio_probe(struct of_device *ofdev, if (NULL == new_bus) return -ENOMEM; + device_init_wakeup(&ofdev->dev, 1); + new_bus->name = "Gianfar MII Bus", new_bus->read = &gfar_mdio_read, new_bus->write = &gfar_mdio_write, diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index f5e2e72..13ca73f 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -699,11 +699,18 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) /* SGMII link check is done through the PCS register. */ if ((hw->phy.media_type != e1000_media_type_copper) || - (igb_sgmii_active_82575(hw))) + (igb_sgmii_active_82575(hw))) { ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, &duplex); - else + /* + * Use this flag to determine if link needs to be checked or + * not. If we have link clear the flag so that we do not + * continue to check for link. + */ + hw->mac.get_link_status = !hw->mac.serdes_has_link; + } else { ret_val = igb_check_for_copper_link(hw); + } return ret_val; } diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h index 5a27825..aebef8e 100644 --- a/drivers/net/igb/igb.h +++ b/drivers/net/igb/igb.h @@ -300,11 +300,10 @@ struct igb_adapter { #define IGB_FLAG_HAS_MSI (1 << 0) #define IGB_FLAG_MSI_ENABLE (1 << 1) -#define IGB_FLAG_HAS_DCA (1 << 2) -#define IGB_FLAG_DCA_ENABLED (1 << 3) -#define IGB_FLAG_IN_NETPOLL (1 << 5) -#define IGB_FLAG_QUAD_PORT_A (1 << 6) -#define IGB_FLAG_NEED_CTX_IDX (1 << 7) +#define IGB_FLAG_DCA_ENABLED (1 << 2) +#define IGB_FLAG_IN_NETPOLL (1 << 3) +#define IGB_FLAG_QUAD_PORT_A (1 << 4) +#define IGB_FLAG_NEED_CTX_IDX (1 << 5) enum e1000_state_t { __IGB_TESTING, diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index b82b0fb..a50db53 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -206,10 +206,11 @@ static int __init igb_init_module(void) global_quad_port_a = 0; - ret = pci_register_driver(&igb_driver); #ifdef CONFIG_IGB_DCA dca_register_notify(&dca_notifier); #endif + + ret = pci_register_driver(&igb_driver); return ret; } @@ -1156,11 +1157,10 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* set flags */ switch (hw->mac.type) { - case e1000_82576: case e1000_82575: - adapter->flags |= IGB_FLAG_HAS_DCA; adapter->flags |= IGB_FLAG_NEED_CTX_IDX; break; + case e1000_82576: default: break; } @@ -1310,8 +1310,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, goto err_register; #ifdef CONFIG_IGB_DCA - if ((adapter->flags & IGB_FLAG_HAS_DCA) && - (dca_add_requester(&pdev->dev) == 0)) { + if (dca_add_requester(&pdev->dev) == 0) { adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&pdev->dev, "DCA enabled\n"); /* Always use CB2 mode, difference is masked @@ -1835,11 +1834,11 @@ static void igb_setup_rctl(struct igb_adapter *adapter) rctl |= E1000_RCTL_SECRC; /* - * disable store bad packets, long packet enable, and clear size bits. + * disable store bad packets and clear size bits. */ - rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_LPE | E1000_RCTL_SZ_256); + rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256); - if (adapter->netdev->mtu > ETH_DATA_LEN) + /* enable LPE when to prevent packets larger than max_frame_size */ rctl |= E1000_RCTL_LPE; /* Setup buffer sizes */ @@ -1865,7 +1864,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter) */ /* allocations using alloc_page take too long for regular MTU * so only enable packet split for jumbo frames */ - if (rctl & E1000_RCTL_LPE) { + if (adapter->netdev->mtu > ETH_DATA_LEN) { adapter->rx_ps_hdr_size = IGB_RXBUFFER_128; srrctl |= adapter->rx_ps_hdr_size << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; @@ -3473,19 +3472,16 @@ static int __igb_notify_dca(struct device *dev, void *data) struct e1000_hw *hw = &adapter->hw; unsigned long event = *(unsigned long *)data; - if (!(adapter->flags & IGB_FLAG_HAS_DCA)) - goto out; - switch (event) { case DCA_PROVIDER_ADD: /* if already enabled, don't do it again */ if (adapter->flags & IGB_FLAG_DCA_ENABLED) break; - adapter->flags |= IGB_FLAG_DCA_ENABLED; /* Always use CB2 mode, difference is masked * in the CB driver. */ wr32(E1000_DCA_CTRL, 2); if (dca_add_requester(dev) == 0) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&adapter->pdev->dev, "DCA enabled\n"); igb_setup_dca(adapter); break; @@ -3502,7 +3498,7 @@ static int __igb_notify_dca(struct device *dev, void *data) } break; } -out: + return 0; } diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index a75a310..9c78c96 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -210,7 +210,7 @@ #define MAX_CMD_DESCRIPTORS_HOST 1024 #define MAX_RCV_DESCRIPTORS_1G 2048 #define MAX_RCV_DESCRIPTORS_10G 4096 -#define MAX_JUMBO_RCV_DESCRIPTORS 512 +#define MAX_JUMBO_RCV_DESCRIPTORS 1024 #define MAX_LRO_RCV_DESCRIPTORS 8 #define MAX_RCVSTATUS_DESCRIPTORS MAX_RCV_DESCRIPTORS #define MAX_JUMBO_RCV_DESC MAX_JUMBO_RCV_DESCRIPTORS diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index ca7c8d8..ffd37be 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -947,8 +947,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) } for (i = 0; i < n; i++) { if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 || - netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) + netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) { + kfree(buf); return -EIO; + } buf[i].addr = addr; buf[i].data = val; diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index ec23142..335da483 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -2168,7 +2168,7 @@ static void gelic_wl_connected_event(struct gelic_wl_info *wl, complete(&wl->assoc_done); netif_carrier_on(port_to_netdev(wl_port(wl))); } else - pr_debug("%s: event %#lx under wpa\n", + pr_debug("%s: event %#llx under wpa\n", __func__, event); } diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 72fd9e9..b2dcdb5 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -438,7 +438,6 @@ static void r6040_down(struct net_device *dev) { struct r6040_private *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; - struct pci_dev *pdev = lp->pdev; int limit = 2048; u16 *adrp; u16 cmd; diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 101c00a..847e9bb 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -676,9 +676,8 @@ static int efx_init_port(struct efx_nic *efx) rc = efx->phy_op->init(efx); if (rc) return rc; - efx->phy_op->reconfigure(efx); - mutex_lock(&efx->mac_lock); + efx->phy_op->reconfigure(efx); rc = falcon_switch_mac(efx); mutex_unlock(&efx->mac_lock); if (rc) @@ -686,7 +685,7 @@ static int efx_init_port(struct efx_nic *efx) efx->mac_op->reconfigure(efx); efx->port_initialized = true; - efx->stats_enabled = true; + efx_stats_enable(efx); return 0; fail: @@ -735,6 +734,7 @@ static void efx_fini_port(struct efx_nic *efx) if (!efx->port_initialized) return; + efx_stats_disable(efx); efx->phy_op->fini(efx); efx->port_initialized = false; @@ -1368,6 +1368,20 @@ static int efx_net_stop(struct net_device *net_dev) return 0; } +void efx_stats_disable(struct efx_nic *efx) +{ + spin_lock(&efx->stats_lock); + ++efx->stats_disable_count; + spin_unlock(&efx->stats_lock); +} + +void efx_stats_enable(struct efx_nic *efx) +{ + spin_lock(&efx->stats_lock); + --efx->stats_disable_count; + spin_unlock(&efx->stats_lock); +} + /* Context: process, dev_base_lock or RTNL held, non-blocking. */ static struct net_device_stats *efx_net_stats(struct net_device *net_dev) { @@ -1376,12 +1390,12 @@ static struct net_device_stats *efx_net_stats(struct net_device *net_dev) struct net_device_stats *stats = &net_dev->stats; /* Update stats if possible, but do not wait if another thread - * is updating them (or resetting the NIC); slightly stale - * stats are acceptable. + * is updating them or if MAC stats fetches are temporarily + * disabled; slightly stale stats are acceptable. */ if (!spin_trylock(&efx->stats_lock)) return stats; - if (efx->stats_enabled) { + if (!efx->stats_disable_count) { efx->mac_op->update_stats(efx); falcon_update_nic_stats(efx); } @@ -1629,16 +1643,12 @@ static void efx_unregister_netdev(struct efx_nic *efx) /* Tears down the entire software state and most of the hardware state * before reset. */ -void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) +void efx_reset_down(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd) { EFX_ASSERT_RESET_SERIALISED(efx); - /* The net_dev->get_stats handler is quite slow, and will fail - * if a fetch is pending over reset. Serialise against it. */ - spin_lock(&efx->stats_lock); - efx->stats_enabled = false; - spin_unlock(&efx->stats_lock); - + efx_stats_disable(efx); efx_stop_all(efx); mutex_lock(&efx->mac_lock); mutex_lock(&efx->spi_lock); @@ -1646,6 +1656,8 @@ void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) efx->phy_op->get_settings(efx, ecmd); efx_fini_channels(efx); + if (efx->port_initialized && method != RESET_TYPE_INVISIBLE) + efx->phy_op->fini(efx); } /* This function will always ensure that the locks acquired in @@ -1653,7 +1665,8 @@ void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) * that we were unable to reinitialise the hardware, and the * driver should be disabled. If ok is false, then the rx and tx * engines are not restarted, pending a RESET_DISABLE. */ -int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok) +int efx_reset_up(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd, bool ok) { int rc; @@ -1665,6 +1678,15 @@ int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok) ok = false; } + if (efx->port_initialized && method != RESET_TYPE_INVISIBLE) { + if (ok) { + rc = efx->phy_op->init(efx); + if (rc) + ok = false; + } else + efx->port_initialized = false; + } + if (ok) { efx_init_channels(efx); @@ -1677,7 +1699,7 @@ int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok) if (ok) { efx_start_all(efx); - efx->stats_enabled = true; + efx_stats_enable(efx); } return rc; } @@ -1709,7 +1731,7 @@ static int efx_reset(struct efx_nic *efx) EFX_INFO(efx, "resetting (%d)\n", method); - efx_reset_down(efx, &ecmd); + efx_reset_down(efx, method, &ecmd); rc = falcon_reset_hw(efx, method); if (rc) { @@ -1728,10 +1750,10 @@ static int efx_reset(struct efx_nic *efx) /* Leave device stopped if necessary */ if (method == RESET_TYPE_DISABLE) { - efx_reset_up(efx, &ecmd, false); + efx_reset_up(efx, method, &ecmd, false); rc = -EIO; } else { - rc = efx_reset_up(efx, &ecmd, true); + rc = efx_reset_up(efx, method, &ecmd, true); } out_disable: @@ -1883,6 +1905,7 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type, efx->rx_checksum_enabled = true; spin_lock_init(&efx->netif_stop_lock); spin_lock_init(&efx->stats_lock); + efx->stats_disable_count = 1; mutex_init(&efx->mac_lock); efx->mac_op = &efx_dummy_mac_operations; efx->phy_op = &efx_dummy_phy_operations; diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h index 0dd7a53..55d0f13 100644 --- a/drivers/net/sfc/efx.h +++ b/drivers/net/sfc/efx.h @@ -36,13 +36,16 @@ extern void efx_process_channel_now(struct efx_channel *channel); extern void efx_flush_queues(struct efx_nic *efx); /* Ports */ +extern void efx_stats_disable(struct efx_nic *efx); +extern void efx_stats_enable(struct efx_nic *efx); extern void efx_reconfigure_port(struct efx_nic *efx); extern void __efx_reconfigure_port(struct efx_nic *efx); /* Reset handling */ -extern void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd); -extern int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, - bool ok); +extern void efx_reset_down(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd); +extern int efx_reset_up(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd, bool ok); /* Global */ extern void efx_schedule_reset(struct efx_nic *efx, enum reset_type type); diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index 53d259e..7b5924c0 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -219,9 +219,6 @@ int efx_ethtool_set_settings(struct net_device *net_dev, struct efx_nic *efx = netdev_priv(net_dev); int rc; - if (EFX_WORKAROUND_13963(efx) && !ecmd->autoneg) - return -EINVAL; - /* Falcon GMAC does not support 1000Mbps HD */ if (ecmd->speed == SPEED_1000 && ecmd->duplex != DUPLEX_FULL) { EFX_LOG(efx, "rejecting unsupported 1000Mbps HD" diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 5b9f2d9..d5378e6 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -824,10 +824,6 @@ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue, rx_ev_pause_frm ? " [PAUSE]" : ""); } #endif - - if (unlikely(rx_ev_eth_crc_err && EFX_WORKAROUND_10750(efx) && - efx->phy_type == PHY_TYPE_SFX7101)) - tenxpress_crc_err(efx); } /* Handle receive events that are not in-order. */ @@ -1887,7 +1883,7 @@ static int falcon_reset_macs(struct efx_nic *efx) /* MAC stats will fail whilst the TX fifo is draining. Serialise * the drain sequence with the statistics fetch */ - spin_lock(&efx->stats_lock); + efx_stats_disable(efx); falcon_read(efx, ®, MAC0_CTRL_REG_KER); EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0, 1); @@ -1917,7 +1913,7 @@ static int falcon_reset_macs(struct efx_nic *efx) udelay(10); } - spin_unlock(&efx->stats_lock); + efx_stats_enable(efx); /* If we've reset the EM block and the link is up, then * we'll have to kick the XAUI link so the PHY can recover */ @@ -2277,6 +2273,10 @@ int falcon_switch_mac(struct efx_nic *efx) struct efx_mac_operations *old_mac_op = efx->mac_op; efx_oword_t nic_stat; unsigned strap_val; + int rc = 0; + + /* Don't try to fetch MAC stats while we're switching MACs */ + efx_stats_disable(efx); /* Internal loopbacks override the phy speed setting */ if (efx->loopback_mode == LOOPBACK_GMAC) { @@ -2287,16 +2287,12 @@ int falcon_switch_mac(struct efx_nic *efx) efx->link_fd = true; } + WARN_ON(!mutex_is_locked(&efx->mac_lock)); efx->mac_op = (EFX_IS10G(efx) ? &falcon_xmac_operations : &falcon_gmac_operations); - if (old_mac_op == efx->mac_op) - return 0; - - WARN_ON(!mutex_is_locked(&efx->mac_lock)); - - /* Not all macs support a mac-level link state */ - efx->mac_up = true; + /* Always push the NIC_STAT_REG setting even if the mac hasn't + * changed, because this function is run post online reset */ falcon_read(efx, &nic_stat, NIC_STAT_REG); strap_val = EFX_IS10G(efx) ? 5 : 3; if (falcon_rev(efx) >= FALCON_REV_B0) { @@ -2309,9 +2305,17 @@ int falcon_switch_mac(struct efx_nic *efx) BUG_ON(EFX_OWORD_FIELD(nic_stat, STRAP_PINS) != strap_val); } + if (old_mac_op == efx->mac_op) + goto out; EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G'); - return falcon_reset_macs(efx); + /* Not all macs support a mac-level link state */ + efx->mac_up = true; + + rc = falcon_reset_macs(efx); +out: + efx_stats_enable(efx); + return rc; } /* This call is responsible for hooking in the MAC and PHY operations */ diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c index f6a1642..f9e2f95 100644 --- a/drivers/net/sfc/mdio_10g.c +++ b/drivers/net/sfc/mdio_10g.c @@ -15,6 +15,7 @@ #include "net_driver.h" #include "mdio_10g.h" #include "boards.h" +#include "workarounds.h" int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd, int spins, int spintime) @@ -179,17 +180,12 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) return false; else if (efx_phy_mode_disabled(efx->phy_mode)) return false; - else if (efx->loopback_mode == LOOPBACK_PHYXS) { + else if (efx->loopback_mode == LOOPBACK_PHYXS) mmd_mask &= ~(MDIO_MMDREG_DEVS_PHYXS | MDIO_MMDREG_DEVS_PCS | MDIO_MMDREG_DEVS_PMAPMD | MDIO_MMDREG_DEVS_AN); - if (!mmd_mask) { - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS, - MDIO_PHYXS_STATUS2); - return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN)); - } - } else if (efx->loopback_mode == LOOPBACK_PCS) + else if (efx->loopback_mode == LOOPBACK_PCS) mmd_mask &= ~(MDIO_MMDREG_DEVS_PCS | MDIO_MMDREG_DEVS_PMAPMD | MDIO_MMDREG_DEVS_AN); @@ -197,6 +193,13 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) mmd_mask &= ~(MDIO_MMDREG_DEVS_PMAPMD | MDIO_MMDREG_DEVS_AN); + if (!mmd_mask) { + /* Use presence of XGMII faults in leui of link state */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS, + MDIO_PHYXS_STATUS2); + return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN)); + } + while (mmd_mask) { if (mmd_mask & 1) { /* Double reads because link state is latched, and a @@ -263,7 +266,7 @@ void mdio_clause45_set_mmds_lpower(struct efx_nic *efx, } } -static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp) +static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr) { int phy_id = efx->mii.phy_id; u32 result = 0; @@ -278,9 +281,6 @@ static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp) result |= ADVERTISED_100baseT_Half; if (reg & ADVERTISE_100FULL) result |= ADVERTISED_100baseT_Full; - if (reg & LPA_RESV) - result |= xnp; - return result; } @@ -310,7 +310,7 @@ void mdio_clause45_get_settings(struct efx_nic *efx, */ void mdio_clause45_get_settings_ext(struct efx_nic *efx, struct ethtool_cmd *ecmd, - u32 xnp, u32 xnp_lpa) + u32 npage_adv, u32 npage_lpa) { int phy_id = efx->mii.phy_id; int reg; @@ -361,8 +361,8 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx, ecmd->autoneg = AUTONEG_ENABLE; ecmd->advertising |= ADVERTISED_Autoneg | - mdio_clause45_get_an(efx, - MDIO_AN_ADVERTISE, xnp); + mdio_clause45_get_an(efx, MDIO_AN_ADVERTISE) | + npage_adv; } else ecmd->autoneg = AUTONEG_DISABLE; } else @@ -371,27 +371,30 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx, if (ecmd->autoneg) { /* If AN is complete, report best common mode, * otherwise report best advertised mode. */ - u32 common = ecmd->advertising; + u32 modes = 0; if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_STAT1) & - (1 << MDIO_AN_STATUS_AN_DONE_LBN)) { - common &= mdio_clause45_get_an(efx, MDIO_AN_LPA, - xnp_lpa); - } - if (common & ADVERTISED_10000baseT_Full) { + (1 << MDIO_AN_STATUS_AN_DONE_LBN)) + modes = (ecmd->advertising & + (mdio_clause45_get_an(efx, MDIO_AN_LPA) | + npage_lpa)); + if (modes == 0) + modes = ecmd->advertising; + + if (modes & ADVERTISED_10000baseT_Full) { ecmd->speed = SPEED_10000; ecmd->duplex = DUPLEX_FULL; - } else if (common & (ADVERTISED_1000baseT_Full | - ADVERTISED_1000baseT_Half)) { + } else if (modes & (ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseT_Half)) { ecmd->speed = SPEED_1000; - ecmd->duplex = !!(common & ADVERTISED_1000baseT_Full); - } else if (common & (ADVERTISED_100baseT_Full | - ADVERTISED_100baseT_Half)) { + ecmd->duplex = !!(modes & ADVERTISED_1000baseT_Full); + } else if (modes & (ADVERTISED_100baseT_Full | + ADVERTISED_100baseT_Half)) { ecmd->speed = SPEED_100; - ecmd->duplex = !!(common & ADVERTISED_100baseT_Full); + ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full); } else { ecmd->speed = SPEED_10; - ecmd->duplex = !!(common & ADVERTISED_10baseT_Full); + ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full); } } else { /* Report forced settings */ @@ -415,7 +418,7 @@ int mdio_clause45_set_settings(struct efx_nic *efx, int phy_id = efx->mii.phy_id; struct ethtool_cmd prev; u32 required; - int ctrl1_bits, reg; + int reg; efx->phy_op->get_settings(efx, &prev); @@ -430,99 +433,83 @@ int mdio_clause45_set_settings(struct efx_nic *efx, if (prev.port != PORT_TP || ecmd->port != PORT_TP) return -EINVAL; - /* Check that PHY supports these settings and work out the - * basic control bits */ - if (ecmd->duplex) { + /* Check that PHY supports these settings */ + if (ecmd->autoneg) { + required = SUPPORTED_Autoneg; + } else if (ecmd->duplex) { switch (ecmd->speed) { - case SPEED_10: - ctrl1_bits = BMCR_FULLDPLX; - required = SUPPORTED_10baseT_Full; - break; - case SPEED_100: - ctrl1_bits = BMCR_SPEED100 | BMCR_FULLDPLX; - required = SUPPORTED_100baseT_Full; - break; - case SPEED_1000: - ctrl1_bits = BMCR_SPEED1000 | BMCR_FULLDPLX; - required = SUPPORTED_1000baseT_Full; - break; - case SPEED_10000: - ctrl1_bits = (BMCR_SPEED1000 | BMCR_SPEED100 | - BMCR_FULLDPLX); - required = SUPPORTED_10000baseT_Full; - break; - default: - return -EINVAL; + case SPEED_10: required = SUPPORTED_10baseT_Full; break; + case SPEED_100: required = SUPPORTED_100baseT_Full; break; + default: return -EINVAL; } } else { switch (ecmd->speed) { - case SPEED_10: - ctrl1_bits = 0; - required = SUPPORTED_10baseT_Half; - break; - case SPEED_100: - ctrl1_bits = BMCR_SPEED100; - required = SUPPORTED_100baseT_Half; - break; - case SPEED_1000: - ctrl1_bits = BMCR_SPEED1000; - required = SUPPORTED_1000baseT_Half; - break; - default: - return -EINVAL; + case SPEED_10: required = SUPPORTED_10baseT_Half; break; + case SPEED_100: required = SUPPORTED_100baseT_Half; break; + default: return -EINVAL; } } - if (ecmd->autoneg) - required |= SUPPORTED_Autoneg; required |= ecmd->advertising; if (required & ~prev.supported) return -EINVAL; - /* Set the basic control bits */ - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, - MDIO_MMDREG_CTRL1); - reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | 0x003c); - reg |= ctrl1_bits; - mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL1, - reg); - - /* Set the AN registers */ - if (ecmd->autoneg != prev.autoneg || - ecmd->advertising != prev.advertising) { - bool xnp = false; - - if (efx->phy_op->set_xnp_advertise) - xnp = efx->phy_op->set_xnp_advertise(efx, - ecmd->advertising); - - if (ecmd->autoneg) { - reg = 0; - if (ecmd->advertising & ADVERTISED_10baseT_Half) - reg |= ADVERTISE_10HALF; - if (ecmd->advertising & ADVERTISED_10baseT_Full) - reg |= ADVERTISE_10FULL; - if (ecmd->advertising & ADVERTISED_100baseT_Half) - reg |= ADVERTISE_100HALF; - if (ecmd->advertising & ADVERTISED_100baseT_Full) - reg |= ADVERTISE_100FULL; - if (xnp) - reg |= ADVERTISE_RESV; - mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, - MDIO_AN_ADVERTISE, reg); - } + if (ecmd->autoneg) { + bool xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full + || EFX_WORKAROUND_13204(efx)); + + /* Set up the base page */ + reg = ADVERTISE_CSMA; + if (ecmd->advertising & ADVERTISED_10baseT_Half) + reg |= ADVERTISE_10HALF; + if (ecmd->advertising & ADVERTISED_10baseT_Full) + reg |= ADVERTISE_10FULL; + if (ecmd->advertising & ADVERTISED_100baseT_Half) + reg |= ADVERTISE_100HALF; + if (ecmd->advertising & ADVERTISED_100baseT_Full) + reg |= ADVERTISE_100FULL; + if (xnp) + reg |= ADVERTISE_RESV; + else if (ecmd->advertising & (ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full)) + reg |= ADVERTISE_NPAGE; + reg |= efx_fc_advertise(efx->wanted_fc); + mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_ADVERTISE, reg); + + /* Set up the (extended) next page if necessary */ + if (efx->phy_op->set_npage_adv) + efx->phy_op->set_npage_adv(efx, ecmd->advertising); + /* Enable and restart AN */ reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_CTRL1); - if (ecmd->autoneg) - reg |= BMCR_ANENABLE | BMCR_ANRESTART; - else - reg &= ~BMCR_ANENABLE; + reg |= BMCR_ANENABLE; + if (!(EFX_WORKAROUND_15195(efx) && + LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)) + reg |= BMCR_ANRESTART; if (xnp) reg |= 1 << MDIO_AN_CTRL_XNP_LBN; else reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN); mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_CTRL1, reg); + } else { + /* Disable AN */ + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN, + MDIO_MMDREG_CTRL1, + __ffs(BMCR_ANENABLE), false); + + /* Set the basic control bits */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_CTRL1); + reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | + 0x003c); + if (ecmd->speed == SPEED_100) + reg |= BMCR_SPEED100; + if (ecmd->duplex) + reg |= BMCR_FULLDPLX; + mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_CTRL1, reg); } return 0; diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h index 09bf801..8ba4977 100644 --- a/drivers/net/sfc/mdio_10g.h +++ b/drivers/net/sfc/mdio_10g.h @@ -155,7 +155,8 @@ #define MDIO_AN_XNP 22 #define MDIO_AN_LPA_XNP 25 -#define MDIO_AN_10GBT_ADVERTISE 32 +#define MDIO_AN_10GBT_CTRL 32 +#define MDIO_AN_10GBT_CTRL_ADV_10G_LBN 12 #define MDIO_AN_10GBT_STATUS (33) #define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */ #define MDIO_AN_10GBT_STATUS_MS_LBN (14) /* MASTER/SLAVE config */ diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 5f255f7..e019ad1 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -566,7 +566,7 @@ struct efx_mac_operations { * @poll: Poll for hardware state. Serialised by the mac_lock. * @get_settings: Get ethtool settings. Serialised by the mac_lock. * @set_settings: Set ethtool settings. Serialised by the mac_lock. - * @set_xnp_advertise: Set abilities advertised in Extended Next Page + * @set_npage_adv: Set abilities advertised in (Extended) Next Page * (only needed where AN bit is set in mmds) * @num_tests: Number of PHY-specific tests/results * @test_names: Names of the tests/results @@ -586,7 +586,7 @@ struct efx_phy_operations { struct ethtool_cmd *ecmd); int (*set_settings) (struct efx_nic *efx, struct ethtool_cmd *ecmd); - bool (*set_xnp_advertise) (struct efx_nic *efx, u32); + void (*set_npage_adv) (struct efx_nic *efx, u32); u32 num_tests; const char *const *test_names; int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags); @@ -754,8 +754,7 @@ union efx_multicast_hash { * &struct net_device_stats. * @stats_buffer: DMA buffer for statistics * @stats_lock: Statistics update lock. Serialises statistics fetches - * @stats_enabled: Temporarily disable statistics fetches. - * Serialised by @stats_lock + * @stats_disable_count: Nest count for disabling statistics fetches * @mac_op: MAC interface * @mac_address: Permanent MAC address * @phy_type: PHY type @@ -837,7 +836,7 @@ struct efx_nic { struct efx_mac_stats mac_stats; struct efx_buffer stats_buffer; spinlock_t stats_lock; - bool stats_enabled; + unsigned int stats_disable_count; struct efx_mac_operations *mac_op; unsigned char mac_address[ETH_ALEN]; diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h index 58c493e..07e855c 100644 --- a/drivers/net/sfc/phy.h +++ b/drivers/net/sfc/phy.h @@ -17,7 +17,6 @@ extern struct efx_phy_operations falcon_sfx7101_phy_ops; extern struct efx_phy_operations falcon_sft9001_phy_ops; extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink); -extern void tenxpress_crc_err(struct efx_nic *efx); /**************************************************************************** * Exported functions from the driver for XFP optical PHYs diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index dba0d64..0a59808 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -665,6 +665,7 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests, { enum efx_loopback_mode loopback_mode = efx->loopback_mode; int phy_mode = efx->phy_mode; + enum reset_type reset_method = RESET_TYPE_INVISIBLE; struct ethtool_cmd ecmd; struct efx_channel *channel; int rc_test = 0, rc_reset = 0, rc; @@ -718,21 +719,21 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests, mutex_unlock(&efx->mac_lock); /* free up all consumers of SRAM (including all the queues) */ - efx_reset_down(efx, &ecmd); + efx_reset_down(efx, reset_method, &ecmd); rc = efx_test_chip(efx, tests); if (rc && !rc_test) rc_test = rc; /* reset the chip to recover from the register test */ - rc_reset = falcon_reset_hw(efx, RESET_TYPE_ALL); + rc_reset = falcon_reset_hw(efx, reset_method); /* Ensure that the phy is powered and out of loopback * for the bist and loopback tests */ efx->phy_mode &= ~PHY_MODE_LOW_POWER; efx->loopback_mode = LOOPBACK_NONE; - rc = efx_reset_up(efx, &ecmd, rc_reset == 0); + rc = efx_reset_up(efx, reset_method, &ecmd, rc_reset == 0); if (rc && !rc_reset) rc_reset = rc; diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index 16b80ac..cb25ae5 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -186,19 +186,22 @@ static int sfn4111t_reset(struct efx_nic *efx) { efx_oword_t reg; - /* GPIO pins are also used for I2C, so block that temporarily */ + /* GPIO 3 and the GPIO register are shared with I2C, so block that */ mutex_lock(&efx->i2c_adap.bus_lock); + /* Pull RST_N (GPIO 2) low then let it up again, setting the + * FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the + * output enables; the output levels should always be 0 (low) + * and we rely on external pull-ups. */ falcon_read(efx, ®, GPIO_CTL_REG_KER); EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, true); - EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, false); falcon_write(efx, ®, GPIO_CTL_REG_KER); msleep(1000); - EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, true); - EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, true); - EFX_SET_OWORD_FIELD(reg, GPIO3_OUT, - !(efx->phy_mode & PHY_MODE_SPECIAL)); + EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, false); + EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, + !!(efx->phy_mode & PHY_MODE_SPECIAL)); falcon_write(efx, ®, GPIO_CTL_REG_KER); + msleep(1); mutex_unlock(&efx->i2c_adap.bus_lock); @@ -232,12 +235,18 @@ static ssize_t set_phy_flash_cfg(struct device *dev, } else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) { err = -EBUSY; } else { + /* Reset the PHY, reconfigure the MAC and enable/disable + * MAC stats accordingly. */ efx->phy_mode = new_mode; + if (new_mode & PHY_MODE_SPECIAL) + efx_stats_disable(efx); if (efx->board_info.type == EFX_BOARD_SFE4001) err = sfe4001_poweron(efx); else err = sfn4111t_reset(efx); efx_reconfigure_port(efx); + if (!(new_mode & PHY_MODE_SPECIAL)) + efx_stats_enable(efx); } rtnl_unlock(); @@ -326,6 +335,11 @@ int sfe4001_init(struct efx_nic *efx) efx->board_info.monitor = sfe4001_check_hw; efx->board_info.fini = sfe4001_fini; + if (efx->phy_mode & PHY_MODE_SPECIAL) { + /* PHY won't generate a 156.25 MHz clock and MAC stats fetch + * will fail. */ + efx_stats_disable(efx); + } rc = sfe4001_poweron(efx); if (rc) goto fail_ioexp; @@ -372,17 +386,25 @@ static void sfn4111t_fini(struct efx_nic *efx) i2c_unregister_device(efx->board_info.hwmon_client); } -static struct i2c_board_info sfn4111t_hwmon_info = { +static struct i2c_board_info sfn4111t_a0_hwmon_info = { I2C_BOARD_INFO("max6647", 0x4e), .irq = -1, }; +static struct i2c_board_info sfn4111t_r5_hwmon_info = { + I2C_BOARD_INFO("max6646", 0x4d), + .irq = -1, +}; + int sfn4111t_init(struct efx_nic *efx) { int rc; efx->board_info.hwmon_client = - i2c_new_device(&efx->i2c_adap, &sfn4111t_hwmon_info); + i2c_new_device(&efx->i2c_adap, + (efx->board_info.minor < 5) ? + &sfn4111t_a0_hwmon_info : + &sfn4111t_r5_hwmon_info); if (!efx->board_info.hwmon_client) return -EIO; @@ -394,8 +416,10 @@ int sfn4111t_init(struct efx_nic *efx) if (rc) goto fail_hwmon; - if (efx->phy_mode & PHY_MODE_SPECIAL) + if (efx->phy_mode & PHY_MODE_SPECIAL) { + efx_stats_disable(efx); sfn4111t_reset(efx); + } return 0; diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index 9ecb77d..f0efd24 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -67,6 +67,8 @@ #define PMA_PMD_EXT_CLK312_WIDTH 1 #define PMA_PMD_EXT_LPOWER_LBN 12 #define PMA_PMD_EXT_LPOWER_WIDTH 1 +#define PMA_PMD_EXT_ROBUST_LBN 14 +#define PMA_PMD_EXT_ROBUST_WIDTH 1 #define PMA_PMD_EXT_SSR_LBN 15 #define PMA_PMD_EXT_SSR_WIDTH 1 @@ -177,35 +179,24 @@ #define C22EXT_STATUS_LINK_LBN 2 #define C22EXT_STATUS_LINK_WIDTH 1 -#define C22EXT_MSTSLV_REG 49162 -#define C22EXT_MSTSLV_1000_HD_LBN 10 -#define C22EXT_MSTSLV_1000_HD_WIDTH 1 -#define C22EXT_MSTSLV_1000_FD_LBN 11 -#define C22EXT_MSTSLV_1000_FD_WIDTH 1 +#define C22EXT_MSTSLV_CTRL 49161 +#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN 8 +#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN 9 + +#define C22EXT_MSTSLV_STATUS 49162 +#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN 10 +#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN 11 /* Time to wait between powering down the LNPGA and turning off the power * rails */ #define LNPGA_PDOWN_WAIT (HZ / 5) -static int crc_error_reset_threshold = 100; -module_param(crc_error_reset_threshold, int, 0644); -MODULE_PARM_DESC(crc_error_reset_threshold, - "Max number of CRC errors before XAUI reset"); - struct tenxpress_phy_data { enum efx_loopback_mode loopback_mode; - atomic_t bad_crc_count; enum efx_phy_mode phy_mode; int bad_lp_tries; }; -void tenxpress_crc_err(struct efx_nic *efx) -{ - struct tenxpress_phy_data *phy_data = efx->phy_data; - if (phy_data != NULL) - atomic_inc(&phy_data->bad_crc_count); -} - static ssize_t show_phy_short_reach(struct device *dev, struct device_attribute *attr, char *buf) { @@ -284,7 +275,9 @@ static int tenxpress_init(struct efx_nic *efx) PMA_PMD_XCONTROL_REG); reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) | (1 << PMA_PMD_EXT_CLK_OUT_LBN) | - (1 << PMA_PMD_EXT_CLK312_LBN)); + (1 << PMA_PMD_EXT_CLK312_LBN) | + (1 << PMA_PMD_EXT_ROBUST_LBN)); + mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, @@ -346,6 +339,7 @@ static int tenxpress_phy_init(struct efx_nic *efx) rc = tenxpress_init(efx); if (rc < 0) goto fail; + mdio_clause45_set_pause(efx); if (efx->phy_type == PHY_TYPE_SFT9001B) { rc = device_create_file(&efx->pci_dev->dev, @@ -376,8 +370,8 @@ static int tenxpress_special_reset(struct efx_nic *efx) /* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so * a special software reset can glitch the XGMAC sufficiently for stats - * requests to fail. Since we don't often special_reset, just lock. */ - spin_lock(&efx->stats_lock); + * requests to fail. */ + efx_stats_disable(efx); /* Initiate reset */ reg = mdio_clause45_read(efx, efx->mii.phy_id, @@ -392,17 +386,17 @@ static int tenxpress_special_reset(struct efx_nic *efx) rc = mdio_clause45_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); if (rc < 0) - goto unlock; + goto out; /* Try and reconfigure the device */ rc = tenxpress_init(efx); if (rc < 0) - goto unlock; + goto out; /* Wait for the XGXS state machine to churn */ mdelay(10); -unlock: - spin_unlock(&efx->stats_lock); +out: + efx_stats_enable(efx); return rc; } @@ -520,7 +514,7 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data = efx->phy_data; struct ethtool_cmd ecmd; - bool phy_mode_change, loop_reset, loop_toggle, loopback; + bool phy_mode_change, loop_reset; if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) { phy_data->phy_mode = efx->phy_mode; @@ -531,12 +525,10 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL && phy_data->phy_mode != PHY_MODE_NORMAL); - loopback = LOOPBACK_MASK(efx) & efx->phy_op->loopbacks; - loop_toggle = LOOPBACK_CHANGED(phy_data, efx, efx->phy_op->loopbacks); loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, efx->phy_op->loopbacks) || LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY)); - if (loop_reset || loop_toggle || loopback || phy_mode_change) { + if (loop_reset || phy_mode_change) { int rc; efx->phy_op->get_settings(efx, &ecmd); @@ -551,20 +543,6 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) falcon_reset_xaui(efx); } - if (efx->phy_type != PHY_TYPE_SFX7101) { - /* Only change autoneg once, on coming out or - * going into loopback */ - if (loop_toggle) - ecmd.autoneg = !loopback; - if (loopback) { - ecmd.duplex = DUPLEX_FULL; - if (efx->loopback_mode == LOOPBACK_GPHY) - ecmd.speed = SPEED_1000; - else - ecmd.speed = SPEED_10000; - } - } - rc = efx->phy_op->set_settings(efx, &ecmd); WARN_ON(rc); } @@ -623,13 +601,6 @@ static void tenxpress_phy_poll(struct efx_nic *efx) if (phy_data->phy_mode != PHY_MODE_NORMAL) return; - - if (EFX_WORKAROUND_10750(efx) && - atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) { - EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n"); - falcon_reset_xaui(efx); - atomic_set(&phy_data->bad_crc_count, 0); - } } static void tenxpress_phy_fini(struct efx_nic *efx) @@ -772,107 +743,76 @@ reset: return rc; } -static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx) +static void +tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { - int phy = efx->mii.phy_id; - u32 lpa = 0; + int phy_id = efx->mii.phy_id; + u32 adv = 0, lpa = 0; int reg; if (efx->phy_type != PHY_TYPE_SFX7101) { - reg = mdio_clause45_read(efx, phy, MDIO_MMD_C22EXT, - C22EXT_MSTSLV_REG); - if (reg & (1 << C22EXT_MSTSLV_1000_HD_LBN)) + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_CTRL); + if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN)) + adv |= ADVERTISED_1000baseT_Full; + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_STATUS); + if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN)) lpa |= ADVERTISED_1000baseT_Half; - if (reg & (1 << C22EXT_MSTSLV_1000_FD_LBN)) + if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN)) lpa |= ADVERTISED_1000baseT_Full; } - reg = mdio_clause45_read(efx, phy, MDIO_MMD_AN, MDIO_AN_10GBT_STATUS); + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL); + if (reg & (1 << MDIO_AN_10GBT_CTRL_ADV_10G_LBN)) + adv |= ADVERTISED_10000baseT_Full; + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_STATUS); if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN)) lpa |= ADVERTISED_10000baseT_Full; - return lpa; -} -static void sfx7101_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) -{ - mdio_clause45_get_settings_ext(efx, ecmd, ADVERTISED_10000baseT_Full, - tenxpress_get_xnp_lpa(efx)); - ecmd->supported |= SUPPORTED_10000baseT_Full; - ecmd->advertising |= ADVERTISED_10000baseT_Full; + mdio_clause45_get_settings_ext(efx, ecmd, adv, lpa); + + if (efx->phy_type != PHY_TYPE_SFX7101) + ecmd->supported |= (SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full); + + /* In loopback, the PHY automatically brings up the correct interface, + * but doesn't advertise the correct speed. So override it */ + if (efx->loopback_mode == LOOPBACK_GPHY) + ecmd->speed = SPEED_1000; + else if (LOOPBACK_MASK(efx) & efx->phy_op->loopbacks) + ecmd->speed = SPEED_10000; } -static void sft9001_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { - int phy_id = efx->mii.phy_id; - u32 xnp_adv = 0; - int reg; - - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG); - if (EFX_WORKAROUND_13204(efx) && (reg & (1 << PMA_PMD_100TX_ADV_LBN))) - xnp_adv |= ADVERTISED_100baseT_Full; - if (reg & (1 << PMA_PMD_1000T_ADV_LBN)) - xnp_adv |= ADVERTISED_1000baseT_Full; - if (reg & (1 << PMA_PMD_10000T_ADV_LBN)) - xnp_adv |= ADVERTISED_10000baseT_Full; - - mdio_clause45_get_settings_ext(efx, ecmd, xnp_adv, - tenxpress_get_xnp_lpa(efx)); - - ecmd->supported |= (SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full); + if (!ecmd->autoneg) + return -EINVAL; - /* Use the vendor defined C22ext register for duplex settings */ - if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) { - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, - GPHY_XCONTROL_REG); - ecmd->duplex = (reg & (1 << GPHY_DUPLEX_LBN) ? - DUPLEX_FULL : DUPLEX_HALF); - } + return mdio_clause45_set_settings(efx, ecmd); } -static int sft9001_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising) { - int phy_id = efx->mii.phy_id; - int rc; - - rc = mdio_clause45_set_settings(efx, ecmd); - if (rc) - return rc; - - if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) - mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, - GPHY_XCONTROL_REG, GPHY_DUPLEX_LBN, - ecmd->duplex == DUPLEX_FULL); - - return rc; + mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV_10G_LBN, + advertising & ADVERTISED_10000baseT_Full); } -static bool sft9001_set_xnp_advertise(struct efx_nic *efx, u32 advertising) +static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising) { - int phy = efx->mii.phy_id; - int reg = mdio_clause45_read(efx, phy, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG); - bool enabled; - - reg &= ~((1 << 2) | (1 << 3)); - if (EFX_WORKAROUND_13204(efx) && - (advertising & ADVERTISED_100baseT_Full)) - reg |= 1 << PMA_PMD_100TX_ADV_LBN; - if (advertising & ADVERTISED_1000baseT_Full) - reg |= 1 << PMA_PMD_1000T_ADV_LBN; - if (advertising & ADVERTISED_10000baseT_Full) - reg |= 1 << PMA_PMD_10000T_ADV_LBN; - mdio_clause45_write(efx, phy, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG, reg); - - enabled = (advertising & - (ADVERTISED_1000baseT_Half | - ADVERTISED_1000baseT_Full | - ADVERTISED_10000baseT_Full)); - if (EFX_WORKAROUND_13204(efx)) - enabled |= (advertising & ADVERTISED_100baseT_Full); - return enabled; + int phy_id = efx->mii.phy_id; + + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_CTRL, + C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN, + advertising & ADVERTISED_1000baseT_Full); + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV_10G_LBN, + advertising & ADVERTISED_10000baseT_Full); } struct efx_phy_operations falcon_sfx7101_phy_ops = { @@ -882,8 +822,9 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = { .poll = tenxpress_phy_poll, .fini = tenxpress_phy_fini, .clear_interrupt = efx_port_dummy_op_void, - .get_settings = sfx7101_get_settings, - .set_settings = mdio_clause45_set_settings, + .get_settings = tenxpress_get_settings, + .set_settings = tenxpress_set_settings, + .set_npage_adv = sfx7101_set_npage_adv, .num_tests = ARRAY_SIZE(sfx7101_test_names), .test_names = sfx7101_test_names, .run_tests = sfx7101_run_tests, @@ -898,9 +839,9 @@ struct efx_phy_operations falcon_sft9001_phy_ops = { .poll = tenxpress_phy_poll, .fini = tenxpress_phy_fini, .clear_interrupt = efx_port_dummy_op_void, - .get_settings = sft9001_get_settings, - .set_settings = sft9001_set_settings, - .set_xnp_advertise = sft9001_set_xnp_advertise, + .get_settings = tenxpress_get_settings, + .set_settings = tenxpress_set_settings, + .set_npage_adv = sft9001_set_npage_adv, .num_tests = ARRAY_SIZE(sft9001_test_names), .test_names = sft9001_test_names, .run_tests = sft9001_run_tests, diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index 82e03e1..78de68f 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -18,8 +18,8 @@ #define EFX_WORKAROUND_ALWAYS(efx) 1 #define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1) #define EFX_WORKAROUND_10G(efx) EFX_IS10G(efx) -#define EFX_WORKAROUND_SFX7101(efx) ((efx)->phy_type == PHY_TYPE_SFX7101) -#define EFX_WORKAROUND_SFT9001A(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A) +#define EFX_WORKAROUND_SFT9001(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A || \ + (efx)->phy_type == PHY_TYPE_SFT9001B) /* XAUI resets if link not detected */ #define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS @@ -29,8 +29,6 @@ #define EFX_WORKAROUND_7884 EFX_WORKAROUND_10G /* TX pkt parser problem with <= 16 byte TXes */ #define EFX_WORKAROUND_9141 EFX_WORKAROUND_ALWAYS -/* Low rate CRC errors require XAUI reset */ -#define EFX_WORKAROUND_10750 EFX_WORKAROUND_SFX7101 /* TX_EV_PKT_ERR can be caused by a dangling TX descriptor * or a PCIe error (bug 11028) */ #define EFX_WORKAROUND_10727 EFX_WORKAROUND_ALWAYS @@ -55,8 +53,8 @@ #define EFX_WORKAROUND_8071 EFX_WORKAROUND_FALCON_A /* Need to send XNP pages for 100BaseT */ -#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001A -/* Need to keep AN enabled */ -#define EFX_WORKAROUND_13963 EFX_WORKAROUND_SFT9001A +#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001 +/* Don't restart AN in near-side loopback */ +#define EFX_WORKAROUND_15195 EFX_WORKAROUND_SFT9001 #endif /* EFX_WORKAROUNDS_H */ diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index 607efea..9a00e55 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -1003,9 +1003,9 @@ static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) break; case SKFP_CLR_STATS: /* Zero out the driver statistics */ if (!capable(CAP_NET_ADMIN)) { - memset(&lp->MacStat, 0, sizeof(lp->MacStat)); - } else { status = -EPERM; + } else { + memset(&lp->MacStat, 0, sizeof(lp->MacStat)); } break; default: diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 3668e81e..994703c 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1403,9 +1403,6 @@ static int sky2_up(struct net_device *dev) } - if (netif_msg_ifup(sky2)) - printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); - netif_carrier_off(dev); /* must be power of 2 */ @@ -1484,6 +1481,9 @@ static int sky2_up(struct net_device *dev) sky2_write32(hw, B0_IMSK, imask); sky2_set_multicast(dev); + + if (netif_msg_ifup(sky2)) + printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); return 0; err_out: diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index f513bdf..783c1a7 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -953,7 +953,7 @@ smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes) do { udelay(1); val = smsc911x_reg_read(pdata, RX_DP_CTRL); - } while (timeout-- && (val & RX_DP_CTRL_RX_FFWD_)); + } while (--timeout && (val & RX_DP_CTRL_RX_FFWD_)); if (unlikely(timeout == 0)) SMSC_WARNING(HW, "Timed out waiting for " diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index c14a4c6..d801900 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -1378,6 +1378,7 @@ static int smsc9420_open(struct net_device *dev) /* test the IRQ connection to the ISR */ smsc_dbg(IFUP, "Testing ISR using IRQ %d", dev->irq); + pd->software_irq_signal = false; spin_lock_irqsave(&pd->int_lock, flags); /* configure interrupt deassertion timer and enable interrupts */ @@ -1393,8 +1394,6 @@ static int smsc9420_open(struct net_device *dev) smsc9420_pci_flush_write(pd); timeout = 1000; - pd->software_irq_signal = false; - smp_wmb(); while (timeout--) { if (pd->software_irq_signal) break; diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c index 1210fb3..db7d5e1 100644 --- a/drivers/net/tulip/21142.c +++ b/drivers/net/tulip/21142.c @@ -9,6 +9,11 @@ Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} for more information on this driver. + + DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller + Hardware Reference Manual" is currently available at : + http://developer.intel.com/design/network/manuals/278074.htm + Please submit bugs to http://bugzilla.kernel.org/ . */ @@ -32,7 +37,11 @@ void t21142_media_task(struct work_struct *work) int csr12 = ioread32(ioaddr + CSR12); int next_tick = 60*HZ; int new_csr6 = 0; + int csr14 = ioread32(ioaddr + CSR14); + /* CSR12[LS10,LS100] are not reliable during autonegotiation */ + if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) + csr12 |= 6; if (tulip_debug > 2) printk(KERN_INFO"%s: 21143 negotiation status %8.8x, %s.\n", dev->name, csr12, medianame[dev->if_port]); @@ -76,7 +85,7 @@ void t21142_media_task(struct work_struct *work) new_csr6 = 0x83860000; dev->if_port = 3; iowrite32(0, ioaddr + CSR13); - iowrite32(0x0003FF7F, ioaddr + CSR14); + iowrite32(0x0003FFFF, ioaddr + CSR14); iowrite16(8, ioaddr + CSR15); iowrite32(1, ioaddr + CSR13); } @@ -132,10 +141,14 @@ void t21142_lnk_change(struct net_device *dev, int csr5) struct tulip_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->base_addr; int csr12 = ioread32(ioaddr + CSR12); + int csr14 = ioread32(ioaddr + CSR14); + /* CSR12[LS10,LS100] are not reliable during autonegotiation */ + if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) + csr12 |= 6; if (tulip_debug > 1) printk(KERN_INFO"%s: 21143 link status interrupt %8.8x, CSR5 %x, " - "%8.8x.\n", dev->name, csr12, csr5, ioread32(ioaddr + CSR14)); + "%8.8x.\n", dev->name, csr12, csr5, csr14); /* If NWay finished and we have a negotiated partner capability. */ if (tp->nway && !tp->nwayset && (csr12 & 0x7000) == 0x5000) { @@ -143,7 +156,9 @@ void t21142_lnk_change(struct net_device *dev, int csr5) int negotiated = tp->sym_advertise & (csr12 >> 16); tp->lpar = csr12 >> 16; tp->nwayset = 1; - if (negotiated & 0x0100) dev->if_port = 5; + /* If partner cannot negotiate, it is 10Mbps Half Duplex */ + if (!(csr12 & 0x8000)) dev->if_port = 0; + else if (negotiated & 0x0100) dev->if_port = 5; else if (negotiated & 0x0080) dev->if_port = 3; else if (negotiated & 0x0040) dev->if_port = 4; else if (negotiated & 0x0020) dev->if_port = 0; @@ -214,7 +229,7 @@ void t21142_lnk_change(struct net_device *dev, int csr5) tp->timer.expires = RUN_AT(3*HZ); add_timer(&tp->timer); } else if (dev->if_port == 5) - iowrite32(ioread32(ioaddr + CSR14) & ~0x080, ioaddr + CSR14); + iowrite32(csr14 & ~0x080, ioaddr + CSR14); } else if (dev->if_port == 0 || dev->if_port == 4) { if ((csr12 & 4) == 0) printk(KERN_INFO"%s: 21143 10baseT link beat good.\n", diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 1144122..e879868 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1536,6 +1536,11 @@ static void adjust_link(struct net_device *dev) static int init_phy(struct net_device *dev) { struct ucc_geth_private *priv = netdev_priv(dev); + struct device_node *np = priv->node; + struct device_node *phy, *mdio; + const phandle *ph; + char bus_name[MII_BUS_ID_SIZE]; + const unsigned int *id; struct phy_device *phydev; char phy_id[BUS_ID_SIZE]; @@ -1543,8 +1548,18 @@ static int init_phy(struct net_device *dev) priv->oldspeed = 0; priv->oldduplex = -1; - snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->ug_info->mdio_bus, - priv->ug_info->phy_address); + ph = of_get_property(np, "phy-handle", NULL); + phy = of_find_node_by_phandle(*ph); + mdio = of_get_parent(phy); + + id = of_get_property(phy, "reg", NULL); + + of_node_put(phy); + of_node_put(mdio); + + uec_mdio_bus_name(bus_name, mdio); + snprintf(phy_id, sizeof(phy_id), "%s:%02x", + bus_name, *id); phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface); @@ -3748,6 +3763,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma ugeth->ug_info = ug_info; ugeth->dev = dev; + ugeth->node = np; return 0; } diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index 8f699cb..16cbe42 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -1186,6 +1186,8 @@ struct ucc_geth_private { int oldspeed; int oldduplex; int oldlink; + + struct device_node *node; }; void uec_set_ethtool_ops(struct net_device *netdev); diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c index c001d26..5463591 100644 --- a/drivers/net/ucc_geth_mii.c +++ b/drivers/net/ucc_geth_mii.c @@ -156,7 +156,7 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma if (err) goto reg_map_fail; - snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start); + uec_mdio_bus_name(new_bus->id, np); new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL); @@ -283,3 +283,13 @@ void uec_mdio_exit(void) { of_unregister_platform_driver(&uec_mdio_driver); } + +void uec_mdio_bus_name(char *name, struct device_node *np) +{ + const u32 *reg; + + reg = of_get_property(np, "reg", NULL); + + snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0); +} + diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h index 1e45b20..840cf80 100644 --- a/drivers/net/ucc_geth_mii.h +++ b/drivers/net/ucc_geth_mii.h @@ -97,4 +97,5 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum); int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); int __init uec_mdio_init(void); void uec_mdio_exit(void); +void uec_mdio_bus_name(char *name, struct device_node *np); #endif /* __UEC_MII_H */ diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 63ef2a8..c688083 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -287,7 +287,7 @@ static void try_fill_recv_maxbufs(struct virtnet_info *vi) skb_put(skb, MAX_PACKET_LEN); hdr = skb_vnet_hdr(skb); - sg_init_one(sg, hdr, sizeof(*hdr)); + sg_set_buf(sg, hdr, sizeof(*hdr)); if (vi->big_packets) { for (i = 0; i < MAX_SKB_FRAGS; i++) { @@ -488,9 +488,9 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) /* Encode metadata header at front. */ if (vi->mergeable_rx_bufs) - sg_init_one(sg, mhdr, sizeof(*mhdr)); + sg_set_buf(sg, mhdr, sizeof(*mhdr)); else - sg_init_one(sg, hdr, sizeof(*hdr)); + sg_set_buf(sg, hdr, sizeof(*hdr)); num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1; diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c index 6266329..9b81af3 100644 --- a/drivers/net/wimax/i2400m/debugfs.c +++ b/drivers/net/wimax/i2400m/debugfs.c @@ -234,20 +234,6 @@ struct dentry *debugfs_create_i2400m_reset( &fops_i2400m_reset); } -/* - * Debug levels control; see debug.h - */ -struct d_level D_LEVEL[] = { - D_SUBMODULE_DEFINE(control), - D_SUBMODULE_DEFINE(driver), - D_SUBMODULE_DEFINE(debugfs), - D_SUBMODULE_DEFINE(fw), - D_SUBMODULE_DEFINE(netdev), - D_SUBMODULE_DEFINE(rfkill), - D_SUBMODULE_DEFINE(rx), - D_SUBMODULE_DEFINE(tx), -}; -size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); #define __debugfs_register(prefix, name, parent) \ do { \ diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c index 5f98047..e80a0b6 100644 --- a/drivers/net/wimax/i2400m/driver.c +++ b/drivers/net/wimax/i2400m/driver.c @@ -707,6 +707,22 @@ void i2400m_release(struct i2400m *i2400m) EXPORT_SYMBOL_GPL(i2400m_release); +/* + * Debug levels control; see debug.h + */ +struct d_level D_LEVEL[] = { + D_SUBMODULE_DEFINE(control), + D_SUBMODULE_DEFINE(driver), + D_SUBMODULE_DEFINE(debugfs), + D_SUBMODULE_DEFINE(fw), + D_SUBMODULE_DEFINE(netdev), + D_SUBMODULE_DEFINE(rfkill), + D_SUBMODULE_DEFINE(rx), + D_SUBMODULE_DEFINE(tx), +}; +size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); + + static int __init i2400m_driver_init(void) { diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 8ef8735..a533ed6 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1028,6 +1028,8 @@ ath5k_setup_bands(struct ieee80211_hw *hw) * it's done by reseting the chip. To accomplish this we must * first cleanup any pending DMA, then restart stuff after a la * ath5k_init. + * + * Called with sc->lock. */ static int ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) @@ -2814,11 +2816,17 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) { struct ath5k_softc *sc = hw->priv; struct ieee80211_conf *conf = &hw->conf; + int ret; + + mutex_lock(&sc->lock); sc->bintval = conf->beacon_int; sc->power_level = conf->power_level; - return ath5k_chan_set(sc, conf->channel); + ret = ath5k_chan_set(sc, conf->channel); + + mutex_unlock(&sc->lock); + return ret; } static int diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 0dc8eed..b35c881 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1719,6 +1719,10 @@ static int iwl_read_ucode(struct iwl_priv *priv) priv->ucode_data_backup.len = data_size; iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); + if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr || + !priv->ucode_data_backup.v_addr) + goto err_pci_alloc; + /* Initialization instructions and data */ if (init_size && init_data_size) { priv->ucode_init.len = init_size; diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c index 4e75e8e..78df281 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c @@ -285,7 +285,10 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel) ofdm_power = priv->channels[channel - 1].hw_value >> 4; cck_power = min(cck_power, (u8)11); - ofdm_power = min(ofdm_power, (u8)35); + if (ofdm_power > (u8)15) + ofdm_power = 25; + else + ofdm_power += 10; rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1); @@ -536,7 +539,10 @@ static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel) cck_power += priv->txpwr_base & 0xF; cck_power = min(cck_power, (u8)35); - ofdm_power = min(ofdm_power, (u8)15); + if (ofdm_power > (u8)15) + ofdm_power = 25; + else + ofdm_power += 10; ofdm_power += priv->txpwr_base >> 4; ofdm_power = min(ofdm_power, (u8)35); diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 3fac8f8..a70cf16 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dev: instance of PCI owned by the driver that's asking * @mask: number of address bits this PCI device can handle * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static int sba_dma_supported( struct device *dev, u64 mask) { @@ -680,8 +680,8 @@ static int sba_dma_supported( struct device *dev, u64 mask) return(0); } - /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first, - * then fall back to 32-bit if that fails. + /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit + * first, then fall back to 32-bit if that fails. * We are just "encouraging" 32-bit DMA masks here since we can * never allow IOMMU bypass unless we add special support for ZX1. */ @@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask) * @size: number of bytes to map in driver buffer. * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static dma_addr_t sba_map_single(struct device *dev, void *addr, size_t size, @@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size, * @size: number of bytes mapped in driver buffer. * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, @@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void *sba_alloc_consistent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) @@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size, * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_free_consistent(struct device *hwdev, size_t size, void *vaddr, @@ -927,7 +927,7 @@ int dump_run_sg = 0; * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static int sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, @@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile index e31fb91..2aa117c 100644 --- a/drivers/pci/hotplug/Makefile +++ b/drivers/pci/hotplug/Makefile @@ -5,11 +5,15 @@ obj-$(CONFIG_HOTPLUG_PCI) += pci_hotplug.o obj-$(CONFIG_HOTPLUG_PCI_COMPAQ) += cpqphp.o obj-$(CONFIG_HOTPLUG_PCI_IBM) += ibmphp.o + +# pciehp should be linked before acpiphp in order to allow the native driver +# to attempt to bind first. We can then fall back to generic support. + +obj-$(CONFIG_HOTPLUG_PCI_PCIE) += pciehp.o obj-$(CONFIG_HOTPLUG_PCI_ACPI) += acpiphp.o obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM) += acpiphp_ibm.o obj-$(CONFIG_HOTPLUG_PCI_CPCI_ZT5550) += cpcihp_zt5550.o obj-$(CONFIG_HOTPLUG_PCI_CPCI_GENERIC) += cpcihp_generic.o -obj-$(CONFIG_HOTPLUG_PCI_PCIE) += pciehp.o obj-$(CONFIG_HOTPLUG_PCI_SHPC) += shpchp.o obj-$(CONFIG_HOTPLUG_PCI_RPA) += rpaphp.o obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR) += rpadlpar_io.o diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index b0e7de9..d8649e1 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -195,13 +195,13 @@ static void remove_slot_worker(struct work_struct *work) * Tries hard not to re-enable already existing devices; * also handles scanning of subfunctions. */ -static void pci_rescan_slot(struct pci_dev *temp) +static int pci_rescan_slot(struct pci_dev *temp) { struct pci_bus *bus = temp->bus; struct pci_dev *dev; int func; - int retval; u8 hdr_type; + int count = 0; if (!pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type)) { temp->hdr_type = hdr_type & 0x7f; @@ -213,17 +213,12 @@ static void pci_rescan_slot(struct pci_dev *temp) dbg("New device on %s function %x:%x\n", bus->name, temp->devfn >> 3, temp->devfn & 7); - retval = pci_bus_add_device(dev); - if (retval) - dev_err(&dev->dev, "error adding " - "device, continuing.\n"); - else - add_slot(dev); + count++; } } /* multifunction device? */ if (!(hdr_type & 0x80)) - return; + return count; /* continue scanning for other functions */ for (func = 1, temp->devfn++; func < 8; func++, temp->devfn++) { @@ -239,16 +234,13 @@ static void pci_rescan_slot(struct pci_dev *temp) dbg("New device on %s function %x:%x\n", bus->name, temp->devfn >> 3, temp->devfn & 7); - retval = pci_bus_add_device(dev); - if (retval) - dev_err(&dev->dev, "error adding " - "device, continuing.\n"); - else - add_slot(dev); + count++; } } } } + + return count; } @@ -262,6 +254,8 @@ static void pci_rescan_bus(const struct pci_bus *bus) { unsigned int devfn; struct pci_dev *dev; + int retval; + int found = 0; dev = alloc_pci_dev(); if (!dev) return; @@ -270,7 +264,23 @@ static void pci_rescan_bus(const struct pci_bus *bus) dev->sysdata = bus->sysdata; for (devfn = 0; devfn < 0x100; devfn += 8) { dev->devfn = devfn; - pci_rescan_slot(dev); + found += pci_rescan_slot(dev); + } + + if (found) { + pci_bus_assign_resources(bus); + list_for_each_entry(dev, &bus->devices, bus_list) { + /* Skip already-added devices */ + if (dev->is_added) + continue; + retval = pci_bus_add_device(dev); + if (retval) + dev_err(&dev->dev, + "Error adding device, continuing\n"); + else + add_slot(dev); + } + pci_bus_add_devices(bus); } kfree(dev); } diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 3dfecb2..f4b7c79 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -268,7 +268,12 @@ static long list_size; static void domain_remove_dev_info(struct dmar_domain *domain); -int dmar_disabled; +#ifdef CONFIG_DMAR_DEFAULT_ON +int dmar_disabled = 0; +#else +int dmar_disabled = 1; +#endif /*CONFIG_DMAR_DEFAULT_ON*/ + static int __initdata dmar_map_gfx = 1; static int dmar_forcedac; static int intel_iommu_strict; @@ -284,9 +289,12 @@ static int __init intel_iommu_setup(char *str) if (!str) return -EINVAL; while (*str) { - if (!strncmp(str, "off", 3)) { + if (!strncmp(str, "on", 2)) { + dmar_disabled = 0; + printk(KERN_INFO "Intel-IOMMU: enabled\n"); + } else if (!strncmp(str, "off", 3)) { dmar_disabled = 1; - printk(KERN_INFO"Intel-IOMMU: disabled\n"); + printk(KERN_INFO "Intel-IOMMU: disabled\n"); } else if (!strncmp(str, "igfx_off", 8)) { dmar_map_gfx = 0; printk(KERN_INFO diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 896a15d..44f15ff 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -103,6 +103,16 @@ static void msix_set_enable(struct pci_dev *dev, int enable) } } +/* + * Essentially, this is ((1 << (1 << x)) - 1), but without the + * undefinedness of a << 32. + */ +static inline __attribute_const__ u32 msi_mask(unsigned x) +{ + static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff }; + return mask[x]; +} + static void msix_flush_writes(struct irq_desc *desc) { struct msi_desc *entry; @@ -407,8 +417,7 @@ static int msi_capability_init(struct pci_dev *dev) /* All MSIs are unmasked by default, Mask them all */ pci_read_config_dword(dev, base, &maskbits); - temp = (1 << multi_msi_capable(control)); - temp = ((temp - 1) & ~temp); + temp = msi_mask((control & PCI_MSI_FLAGS_QMASK) >> 1); maskbits |= temp; pci_write_config_dword(dev, base, maskbits); entry->msi_attrib.maskbits_mask = temp; diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 9de07b7..ab1d615 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -370,6 +370,7 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state) } pci_save_state(pci_dev); + pci_dev->state_saved = true; /* * This is for compatibility with existing code with legacy PM support. */ @@ -419,6 +420,7 @@ static int pci_legacy_resume(struct device *dev) static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev) { pci_restore_standard_config(pci_dev); + pci_dev->state_saved = false; pci_fixup_device(pci_fixup_resume_early, pci_dev); } @@ -555,6 +557,13 @@ static int pci_pm_resume(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + /* + * This is necessary for the suspend error path in which resume is + * called without restoring the standard config registers of the device. + */ + if (pci_dev->state_saved) + pci_restore_standard_config(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume(dev); @@ -660,7 +669,10 @@ static int pci_pm_poweroff(struct device *dev) if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend(dev, PMSG_HIBERNATE); - if (drv && drv->pm && drv->pm->poweroff) { + if (!drv || !drv->pm) + return 0; + + if (drv->pm->poweroff) { error = drv->pm->poweroff(dev); suspend_report_result(drv->pm->poweroff, error); } @@ -710,6 +722,13 @@ static int pci_pm_restore(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + /* + * This is necessary for the hibernation error path in which restore is + * called without restoring the standard config registers of the device. + */ + if (pci_dev->state_saved) + pci_restore_standard_config(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume(dev); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 17bd932..4880755 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1393,35 +1393,35 @@ int pci_restore_standard_config(struct pci_dev *dev) pci_power_t prev_state; int error; - pci_restore_state(dev); pci_update_current_state(dev, PCI_D0); prev_state = dev->current_state; if (prev_state == PCI_D0) - return 0; + goto Restore; error = pci_raw_set_power_state(dev, PCI_D0, false); if (error) return error; - if (pci_is_bridge(dev)) { - if (prev_state > PCI_D1) - mdelay(PCI_PM_BUS_WAIT); - } else { - switch(prev_state) { - case PCI_D3cold: - case PCI_D3hot: - mdelay(pci_pm_d3_delay); - break; - case PCI_D2: - udelay(PCI_PM_D2_DELAY); - break; - } + /* + * This assumes that we won't get a bus in B2 or B3 from the BIOS, but + * we've made this assumption forever and it appears to be universally + * satisfied. + */ + switch(prev_state) { + case PCI_D3cold: + case PCI_D3hot: + mdelay(pci_pm_d3_delay); + break; + case PCI_D2: + udelay(PCI_PM_D2_DELAY); + break; } dev->current_state = PCI_D0; - return 0; + Restore: + return pci_restore_state(dev); } /** diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 7c789f0..de91dda 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -382,6 +382,11 @@ static int __init hp_wmi_input_setup(void) case KE_SW: set_bit(EV_SW, hp_wmi_input_dev->evbit); set_bit(key->keycode, hp_wmi_input_dev->swbit); + + /* Set initial dock state */ + input_report_switch(hp_wmi_input_dev, key->keycode, + hp_wmi_dock_state()); + input_sync(hp_wmi_input_dev); break; } } @@ -441,6 +446,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set; bluetooth_rfkill->user_claim_unsupported = 1; err = rfkill_register(bluetooth_rfkill); + if (err) goto register_bluetooth_error; } diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c index 366565a..c175e38 100644 --- a/drivers/regulator/bq24022.c +++ b/drivers/regulator/bq24022.c @@ -152,11 +152,7 @@ static void __exit bq24022_exit(void) platform_driver_unregister(&bq24022_driver); } -/* - * make sure this is probed before gpio_vbus and pda_power, - * but after asic3 or other GPIO expander drivers. - */ -subsys_initcall(bq24022_init); +module_init(bq24022_init); module_exit(bq24022_exit); MODULE_AUTHOR("Philipp Zabel"); diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 7aa3524..5056e23 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1435,7 +1435,7 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink, struct platform_device *pdev; int ret; - if (lednum > ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { + if (lednum >= ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { dev_err(wm8350->dev, "Invalid LED index %d\n", lednum); return -ENODEV; } diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 3547558..324c74d 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -161,6 +161,11 @@ static void jsm_tty_stop_rx(struct uart_port *port) channel->ch_bd->bd_ops->disable_receiver(channel); } +static void jsm_tty_enable_ms(struct uart_port *port) +{ + /* Nothing needed */ +} + static void jsm_tty_break(struct uart_port *port, int break_state) { unsigned long lock_flags; @@ -345,6 +350,7 @@ static struct uart_ops jsm_ops = { .start_tx = jsm_tty_start_tx, .send_xchar = jsm_tty_send_xchar, .stop_rx = jsm_tty_stop_rx, + .enable_ms = jsm_tty_enable_ms, .break_ctl = jsm_tty_break, .startup = jsm_tty_open, .shutdown = jsm_tty_close, diff --git a/drivers/staging/agnx/agnx.h b/drivers/staging/agnx/agnx.h index a75b0db..20f36da 100644 --- a/drivers/staging/agnx/agnx.h +++ b/drivers/staging/agnx/agnx.h @@ -1,6 +1,8 @@ #ifndef AGNX_H_ #define AGNX_H_ +#include <linux/io.h> + #include "xmit.h" #define PFX KBUILD_MODNAME ": " diff --git a/drivers/staging/altpciechdma/altpciechdma.c b/drivers/staging/altpciechdma/altpciechdma.c index 8e2b4ca..f516140 100644 --- a/drivers/staging/altpciechdma/altpciechdma.c +++ b/drivers/staging/altpciechdma/altpciechdma.c @@ -531,7 +531,7 @@ static int __devinit dma_test(struct ape_dev *ape, struct pci_dev *dev) goto fail; /* allocate and map coherently-cached memory for a DMA-able buffer */ - /* @see 2.6.26.2/Documentation/DMA-mapping.txt line 318 */ + /* @see Documentation/PCI/PCI-DMA-mapping.txt, near line 318 */ buffer_virt = (u8 *)pci_alloc_consistent(dev, PAGE_SIZE * 4, &buffer_bus); if (!buffer_virt) { printk(KERN_DEBUG "Could not allocate coherent DMA buffer.\n"); @@ -846,7 +846,7 @@ static int __devinit probe(struct pci_dev *dev, const struct pci_device_id *id) #if 1 // @todo For now, disable 64-bit, because I do not understand the implications (DAC!) /* query for DMA transfer */ - /* @see Documentation/DMA-mapping.txt */ + /* @see Documentation/PCI/PCI-DMA-mapping.txt */ if (!pci_set_dma_mask(dev, DMA_64BIT_MASK)) { pci_set_consistent_dma_mask(dev, DMA_64BIT_MASK); /* use 64-bit DMA */ diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 6a4ceac..758131c 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -319,6 +319,7 @@ int task_get_unused_fd_flags(struct task_struct *tsk, int flags) int fd, error; struct fdtable *fdt; unsigned long rlim_cur; + unsigned long irqs; if (files == NULL) return -ESRCH; @@ -335,12 +336,11 @@ repeat: * N.B. For clone tasks sharing a files structure, this test * will limit the total number of files that can be opened. */ - rcu_read_lock(); - if (tsk->signal) + rlim_cur = 0; + if (lock_task_sighand(tsk, &irqs)) { rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur; - else - rlim_cur = 0; - rcu_read_unlock(); + unlock_task_sighand(tsk, &irqs); + } if (fd >= rlim_cur) goto out; @@ -2649,14 +2649,14 @@ static void binder_vma_open(struct vm_area_struct *vma) { struct binder_proc *proc = vma->vm_private_data; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); dump_stack(); } static void binder_vma_close(struct vm_area_struct *vma) { struct binder_proc *proc = vma->vm_private_data; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); proc->vma = NULL; } @@ -2677,7 +2677,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) vma->vm_end = vma->vm_start + SZ_4M; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); if (vma->vm_flags & FORBIDDEN_MMAP_FLAGS) { ret = -EPERM; diff --git a/drivers/staging/android/lowmemorykiller.txt b/drivers/staging/android/lowmemorykiller.txt new file mode 100644 index 0000000..bd5c0c0 --- /dev/null +++ b/drivers/staging/android/lowmemorykiller.txt @@ -0,0 +1,16 @@ +The lowmemorykiller driver lets user-space specify a set of memory thresholds +where processes with a range of oom_adj values will get killed. Specify the +minimum oom_adj values in /sys/module/lowmemorykiller/parameters/adj and the +number of free pages in /sys/module/lowmemorykiller/parameters/minfree. Both +files take a comma separated list of numbers in ascending order. + +For example, write "0,8" to /sys/module/lowmemorykiller/parameters/adj and +"1024,4096" to /sys/module/lowmemorykiller/parameters/minfree to kill processes +with a oom_adj value of 8 or higher when the free memory drops below 4096 pages +and kill processes with a oom_adj value of 0 or higher when the free memory +drops below 1024 pages. + +The driver considers memory used for caches to be free, but if a large +percentage of the cached memory is locked this can be very inaccurate +and processes may not get killed until the normal oom killer is triggered. + diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c index bea68c9..903270c 100644 --- a/drivers/staging/android/timed_gpio.c +++ b/drivers/staging/android/timed_gpio.c @@ -18,7 +18,7 @@ #include <linux/platform_device.h> #include <linux/hrtimer.h> #include <linux/err.h> -#include <asm/arch/gpio.h> +#include <linux/gpio.h> #include "timed_gpio.h" @@ -49,7 +49,8 @@ static ssize_t gpio_enable_show(struct device *dev, struct device_attribute *att if (hrtimer_active(&gpio_data->timer)) { ktime_t r = hrtimer_get_remaining(&gpio_data->timer); - remaining = r.tv.sec * 1000 + r.tv.nsec / 1000000; + struct timeval t = ktime_to_timeval(r); + remaining = t.tv_sec * 1000 + t.tv_usec; } else remaining = 0; diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index b501bfb..b47ca1e 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -1,6 +1,7 @@ config COMEDI tristate "Data Acquision support (comedi)" default N + depends on m ---help--- Enable support a wide range of data acquision devices for Linux. diff --git a/drivers/staging/meilhaus/Kconfig b/drivers/staging/meilhaus/Kconfig index 6def83f..923af22 100644 --- a/drivers/staging/meilhaus/Kconfig +++ b/drivers/staging/meilhaus/Kconfig @@ -4,6 +4,7 @@ menuconfig MEILHAUS tristate "Meilhaus support" + depends on m ---help--- If you have a Meilhaus card, say Y (or M) here. @@ -18,7 +19,7 @@ if MEILHAUS config ME0600 tristate "Meilhaus ME-600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-600 family of boards that do data collection and multipurpose I/O. @@ -29,7 +30,7 @@ config ME0600 config ME0900 tristate "Meilhaus ME-900 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-900 family of boards that do data collection and multipurpose I/O. @@ -40,7 +41,7 @@ config ME0900 config ME1000 tristate "Meilhaus ME-1000 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1000 family of boards that do data collection and multipurpose I/O. @@ -51,7 +52,7 @@ config ME1000 config ME1400 tristate "Meilhaus ME-1400 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1400 family of boards that do data collection and multipurpose I/O. @@ -62,7 +63,7 @@ config ME1400 config ME1600 tristate "Meilhaus ME-1600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1600 family of boards that do data collection and multipurpose I/O. @@ -73,7 +74,7 @@ config ME1600 config ME4600 tristate "Meilhaus ME-4600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-4600 family of boards that do data collection and multipurpose I/O. @@ -84,7 +85,7 @@ config ME4600 config ME6000 tristate "Meilhaus ME-6000 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-6000 family of boards that do data collection and multipurpose I/O. @@ -95,7 +96,7 @@ config ME6000 config ME8100 tristate "Meilhaus ME-8100 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-8100 family of boards that do data collection and multipurpose I/O. @@ -106,7 +107,7 @@ config ME8100 config ME8200 tristate "Meilhaus ME-8200 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-8200 family of boards that do data collection and multipurpose I/O. @@ -117,7 +118,7 @@ config ME8200 config MEDUMMY tristate "Meilhaus dummy driver" default n - depends on PCI + depends on PCI && m help This provides a dummy driver for the Meilhaus driver package diff --git a/drivers/staging/poch/poch.c b/drivers/staging/poch/poch.c index ec343ef..0d111dd 100644 --- a/drivers/staging/poch/poch.c +++ b/drivers/staging/poch/poch.c @@ -1026,7 +1026,7 @@ static int poch_ioctl(struct inode *inode, struct file *filp, } break; case POCH_IOC_GET_COUNTERS: - if (access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters))) + if (!access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters))) return -EFAULT; spin_lock_irq(&channel->counters_lock); diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c index 72e2092..22f93dd 100644 --- a/drivers/staging/usbip/usbip_common.c +++ b/drivers/staging/usbip/usbip_common.c @@ -406,8 +406,20 @@ void usbip_start_threads(struct usbip_device *ud) /* * threads are invoked per one device (per one connection). */ - kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0); - kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0); + int retval; + + retval = kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0); + if (retval < 0) { + printk(KERN_ERR "Creating tcp_rx thread for ud %p failed.\n", + ud); + return; + } + retval = kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0); + if (retval < 0) { + printk(KERN_ERR "Creating tcp_tx thread for ud %p failed.\n", + ud); + return; + } /* confirm threads are starting */ wait_for_completion(&ud->tcp_rx.thread_done); diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 577c0d2..2291c5f 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -170,12 +170,17 @@ void asl_stop(struct whc *whc) void asl_update(struct whc *whc, uint32_t wusbcmd) { struct wusbhc *wusbhc = &whc->wusbhc; + long t; mutex_lock(&wusbhc->mutex); if (wusbhc->active) { whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - wait_event(whc->async_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0); + t = wait_event_timeout( + whc->async_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0, + msecs_to_jiffies(1000)); + if (t == 0) + whc_hw_error(whc, "ASL update timeout"); } mutex_unlock(&wusbhc->mutex); } diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c index d498e72..6afa2e3 100644 --- a/drivers/usb/host/whci/hw.c +++ b/drivers/usb/host/whci/hw.c @@ -87,3 +87,18 @@ out: return ret; } + +/** + * whc_hw_error - recover from a hardware error + * @whc: the WHCI HC that broke. + * @reason: a description of the failure. + * + * Recover from broken hardware with a full reset. + */ +void whc_hw_error(struct whc *whc, const char *reason) +{ + struct wusbhc *wusbhc = &whc->wusbhc; + + dev_err(&whc->umc->dev, "hardware error: %s\n", reason); + wusbhc_reset_all(wusbhc); +} diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index 2ae5abf..7dc85a0 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -183,12 +183,17 @@ void pzl_stop(struct whc *whc) void pzl_update(struct whc *whc, uint32_t wusbcmd) { struct wusbhc *wusbhc = &whc->wusbhc; + long t; mutex_lock(&wusbhc->mutex); if (wusbhc->active) { whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - wait_event(whc->periodic_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0); + t = wait_event_timeout( + whc->periodic_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0, + msecs_to_jiffies(1000)); + if (t == 0) + whc_hw_error(whc, "PZL update timeout"); } mutex_unlock(&wusbhc->mutex); } diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h index 0f3540f..d3543a1 100644 --- a/drivers/usb/host/whci/whcd.h +++ b/drivers/usb/host/whci/whcd.h @@ -137,6 +137,7 @@ void whc_clean_up(struct whc *whc); /* hw.c */ void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val); int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len); +void whc_hw_error(struct whc *whc, const char *reason); /* wusb.c */ int whc_wusbhc_start(struct wusbhc *wusbhc); diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index e2e7e4b..8e18141 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -386,6 +386,7 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE; if (wusb_dev) { + dev_dbg(wusbhc->dev, "disconnecting device from port %d\n", wusb_dev->port_idx); if (!list_empty(&wusb_dev->cack_node)) list_del_init(&wusb_dev->cack_node); /* For the one in cack_add() */ diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c index 3937bf6..9fe4246 100644 --- a/drivers/usb/wusbcore/rh.c +++ b/drivers/usb/wusbcore/rh.c @@ -100,6 +100,9 @@ static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); struct wusb_dev *wusb_dev = port->wusb_dev; + if (wusb_dev == NULL) + return -ENOTCONN; + port->status |= USB_PORT_STAT_RESET; port->change |= USB_PORT_STAT_C_RESET; diff --git a/drivers/uwb/allocator.c b/drivers/uwb/allocator.c index c8185e6..c13cec7 100644 --- a/drivers/uwb/allocator.c +++ b/drivers/uwb/allocator.c @@ -15,7 +15,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <linux/version.h> #include <linux/kernel.h> #include <linux/uwb.h> diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c index 2b4f940..4f5ca99 100644 --- a/drivers/uwb/drp.c +++ b/drivers/uwb/drp.c @@ -66,14 +66,14 @@ static void uwb_rc_set_drp_cmd_done(struct uwb_rc *rc, void *arg, } else dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n"); - spin_lock(&rc->rsvs_lock); + spin_lock_bh(&rc->rsvs_lock); if (rc->set_drp_ie_pending > 1) { rc->set_drp_ie_pending = 0; uwb_rsv_queue_update(rc); } else { rc->set_drp_ie_pending = 0; } - spin_unlock(&rc->rsvs_lock); + spin_unlock_bh(&rc->rsvs_lock); } /** diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c index ec6eecb..6b76f4b 100644 --- a/drivers/uwb/rsv.c +++ b/drivers/uwb/rsv.c @@ -114,7 +114,8 @@ void uwb_rsv_dump(char *text, struct uwb_rsv *rsv) devaddr = rsv->target.devaddr; uwb_dev_addr_print(target, sizeof(target), &devaddr); - dev_dbg(dev, "rsv %s -> %s: %s\n", owner, target, uwb_rsv_state_str(rsv->state)); + dev_dbg(dev, "rsv %s %s -> %s: %s\n", + text, owner, target, uwb_rsv_state_str(rsv->state)); } static void uwb_rsv_release(struct kref *kref) @@ -511,8 +512,7 @@ void uwb_rsv_remove(struct uwb_rsv *rsv) if (uwb_rsv_is_owner(rsv)) uwb_rsv_put_stream(rsv); - - del_timer_sync(&rsv->timer); + uwb_dev_put(rsv->owner); if (rsv->target.type == UWB_RSV_TARGET_DEV) uwb_dev_put(rsv->target.dev); @@ -870,7 +870,7 @@ void uwb_rsv_queue_update(struct uwb_rc *rc) */ void uwb_rsv_sched_update(struct uwb_rc *rc) { - spin_lock(&rc->rsvs_lock); + spin_lock_bh(&rc->rsvs_lock); if (!delayed_work_pending(&rc->rsv_update_work)) { if (rc->set_drp_ie_pending > 0) { rc->set_drp_ie_pending++; @@ -879,7 +879,7 @@ void uwb_rsv_sched_update(struct uwb_rc *rc) uwb_rsv_queue_update(rc); } unlock: - spin_unlock(&rc->rsvs_lock); + spin_unlock_bh(&rc->rsvs_lock); } /* @@ -943,13 +943,22 @@ void uwb_rsv_remove_all(struct uwb_rc *rc) mutex_lock(&rc->rsvs_mutex); list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { - uwb_rsv_remove(rsv); + if (rsv->state != UWB_RSV_STATE_NONE) + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + del_timer_sync(&rsv->timer); } /* Cancel any postponed update. */ rc->set_drp_ie_pending = 0; mutex_unlock(&rc->rsvs_mutex); cancel_delayed_work_sync(&rc->rsv_update_work); + flush_workqueue(rc->rsv_workq); + + mutex_lock(&rc->rsvs_mutex); + list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { + uwb_rsv_remove(rsv); + } + mutex_unlock(&rc->rsvs_mutex); } void uwb_rsv_init(struct uwb_rc *rc) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index c94f719..f026770 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -41,7 +41,7 @@ menuconfig FB You need an utility program called fbset to make full use of frame buffer devices. Please read <file:Documentation/fb/framebuffer.txt> and the Framebuffer-HOWTO at - <http://www.tahallah.demon.co.uk/programming/prog.html> for more + <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more information. Say Y here and to the driver for your graphics board below if you diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/aty/mach64_ct.c index c50c7cf..2745b85 100644 --- a/drivers/video/aty/mach64_ct.c +++ b/drivers/video/aty/mach64_ct.c @@ -8,6 +8,9 @@ #include <asm/io.h> #include <video/mach64.h> #include "atyfb.h" +#ifdef CONFIG_PPC +#include <asm/machdep.h> +#endif #undef DEBUG @@ -536,6 +539,14 @@ static int __devinit aty_init_pll_ct(const struct fb_info *info, pll->ct.xclk_post_div_real = postdividers[xpost_div]; pll->ct.mclk_fb_div = q * pll->ct.xclk_post_div_real / 8; +#ifdef CONFIG_PPC + if (machine_is(powermac)) { + /* Override PLL_EXT_CNTL & 0x07. */ + pll->ct.xclk_post_div = xpost_div; + pll->ct.xclk_ref_div = 1; + } +#endif + #ifdef DEBUG pllmclk = (1000000 * pll->ct.mclk_fb_mult * pll->ct.mclk_fb_div) / (par->ref_clk_per * pll->ct.pll_ref_div); diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index bef6b45..330aacb 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -192,7 +192,7 @@ static irqreturn_t vp_interrupt(int irq, void *opaque) drv = container_of(vp_dev->vdev.dev.driver, struct virtio_driver, driver); - if (drv->config_changed) + if (drv && drv->config_changed) drv->config_changed(&vp_dev->vdev); } diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 2ba8f95..efa4b36 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -498,7 +498,7 @@ static ssize_t store_target_kb(struct sys_device *dev, if (!capable(CAP_SYS_ADMIN)) return -EPERM; - target_bytes = memparse(buf, &endchar); + target_bytes = simple_strtoull(buf, &endchar, 0) * 1024; balloon_set_new_target(target_bytes >> PAGE_SHIFT); @@ -508,8 +508,39 @@ static ssize_t store_target_kb(struct sys_device *dev, static SYSDEV_ATTR(target_kb, S_IRUGO | S_IWUSR, show_target_kb, store_target_kb); + +static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr, + char *buf) +{ + return sprintf(buf, "%llu\n", + (u64)balloon_stats.target_pages << PAGE_SHIFT); +} + +static ssize_t store_target(struct sys_device *dev, + struct sysdev_attribute *attr, + const char *buf, + size_t count) +{ + char *endchar; + unsigned long long target_bytes; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + target_bytes = memparse(buf, &endchar); + + balloon_set_new_target(target_bytes >> PAGE_SHIFT); + + return count; +} + +static SYSDEV_ATTR(target, S_IRUGO | S_IWUSR, + show_target, store_target); + + static struct sysdev_attribute *balloon_attrs[] = { &attr_target_kb, + &attr_target, }; static struct attribute *balloon_info_attrs[] = { diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c index 77ebc3c..549b014 100644 --- a/fs/bio-integrity.c +++ b/fs/bio-integrity.c @@ -140,7 +140,6 @@ int bio_integrity_add_page(struct bio *bio, struct page *page, iv = bip_vec_idx(bip, bip->bip_vcnt); BUG_ON(iv == NULL); - BUG_ON(iv->bv_page != NULL); iv->bv_page = page; iv->bv_len = len; @@ -465,7 +464,7 @@ static int bio_integrity_verify(struct bio *bio) if (ret) { kunmap_atomic(kaddr, KM_USER0); - break; + return ret; } sectors = bv->bv_len / bi->sector_size; @@ -493,18 +492,13 @@ static void bio_integrity_verify_fn(struct work_struct *work) struct bio_integrity_payload *bip = container_of(work, struct bio_integrity_payload, bip_work); struct bio *bio = bip->bip_bio; - int error = bip->bip_error; + int error; - if (bio_integrity_verify(bio)) { - clear_bit(BIO_UPTODATE, &bio->bi_flags); - error = -EIO; - } + error = bio_integrity_verify(bio); /* Restore original bio completion handler */ bio->bi_end_io = bip->bip_end_io; - - if (bio->bi_end_io) - bio->bi_end_io(bio, error); + bio_endio(bio, error); } /** @@ -525,7 +519,17 @@ void bio_integrity_endio(struct bio *bio, int error) BUG_ON(bip->bip_bio != bio); - bip->bip_error = error; + /* In case of an I/O error there is no point in verifying the + * integrity metadata. Restore original bio end_io handler + * and run it. + */ + if (error) { + bio->bi_end_io = bip->bip_end_io; + bio_endio(bio, error); + + return; + } + INIT_WORK(&bip->bip_work, bio_integrity_verify_fn); queue_work(kintegrityd_wq, &bip->bip_work); } diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 080703a..73ac7eb 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -5,7 +5,9 @@ rather than posix (advisory) byte range locks, even though server would support posix byte range locks. Fix query of root inode when prefixpath specified and user does not have access to query information about the top of the share. Fix problem in 2.6.28 resolving DFS paths to -Samba servers (worked to Windows). +Samba servers (worked to Windows). Fix rmdir so that pending search +(readdir) requests do not get invalid results which include the now +removed directory. Version 1.55 ------------ diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index d4839cf..7c98095 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -48,11 +48,11 @@ static int cifs_calculate_signature(const struct smb_hdr *cifs_pdu, if ((cifs_pdu == NULL) || (signature == NULL) || (key == NULL)) return -EINVAL; - MD5Init(&context); - MD5Update(&context, (char *)&key->data, key->len); - MD5Update(&context, cifs_pdu->Protocol, cifs_pdu->smb_buf_length); + cifs_MD5_init(&context); + cifs_MD5_update(&context, (char *)&key->data, key->len); + cifs_MD5_update(&context, cifs_pdu->Protocol, cifs_pdu->smb_buf_length); - MD5Final(signature, &context); + cifs_MD5_final(signature, &context); return 0; } @@ -96,8 +96,8 @@ static int cifs_calc_signature2(const struct kvec *iov, int n_vec, if ((iov == NULL) || (signature == NULL) || (key == NULL)) return -EINVAL; - MD5Init(&context); - MD5Update(&context, (char *)&key->data, key->len); + cifs_MD5_init(&context); + cifs_MD5_update(&context, (char *)&key->data, key->len); for (i = 0; i < n_vec; i++) { if (iov[i].iov_len == 0) continue; @@ -110,13 +110,13 @@ static int cifs_calc_signature2(const struct kvec *iov, int n_vec, if (i == 0) { if (iov[0].iov_len <= 8) /* cmd field at offset 9 */ break; /* nothing to sign or corrupt header */ - MD5Update(&context, iov[0].iov_base+4, + cifs_MD5_update(&context, iov[0].iov_base+4, iov[0].iov_len-4); } else - MD5Update(&context, iov[i].iov_base, iov[i].iov_len); + cifs_MD5_update(&context, iov[i].iov_base, iov[i].iov_len); } - MD5Final(signature, &context); + cifs_MD5_final(signature, &context); return 0; } diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 06f6779..382ba62 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -35,8 +35,8 @@ extern struct smb_hdr *cifs_buf_get(void); extern void cifs_buf_release(void *); extern struct smb_hdr *cifs_small_buf_get(void); extern void cifs_small_buf_release(void *); -extern int smb_send(struct socket *, struct smb_hdr *, - unsigned int /* length */ , struct sockaddr *, bool); +extern int smb_send(struct TCP_Server_Info *, struct smb_hdr *, + unsigned int /* length */); extern unsigned int _GetXid(void); extern void _FreeXid(unsigned int); #define GetXid() (int)_GetXid(); cFYI(1,("CIFS VFS: in %s as Xid: %d with uid: %d",__func__, xid,current_fsuid())); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index e9ea394..2209be9 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1354,7 +1354,7 @@ cifs_parse_mount_options(char *options, const char *devname, } static struct TCP_Server_Info * -cifs_find_tcp_session(struct sockaddr *addr) +cifs_find_tcp_session(struct sockaddr_storage *addr) { struct list_head *tmp; struct TCP_Server_Info *server; @@ -1374,11 +1374,11 @@ cifs_find_tcp_session(struct sockaddr *addr) if (server->tcpStatus == CifsNew) continue; - if (addr->sa_family == AF_INET && + if (addr->ss_family == AF_INET && (addr4->sin_addr.s_addr != server->addr.sockAddr.sin_addr.s_addr)) continue; - else if (addr->sa_family == AF_INET6 && + else if (addr->ss_family == AF_INET6 && memcmp(&server->addr.sockAddr6.sin6_addr, &addr6->sin6_addr, sizeof(addr6->sin6_addr))) continue; @@ -1419,12 +1419,12 @@ static struct TCP_Server_Info * cifs_get_tcp_session(struct smb_vol *volume_info) { struct TCP_Server_Info *tcp_ses = NULL; - struct sockaddr addr; + struct sockaddr_storage addr; struct sockaddr_in *sin_server = (struct sockaddr_in *) &addr; struct sockaddr_in6 *sin_server6 = (struct sockaddr_in6 *) &addr; int rc; - memset(&addr, 0, sizeof(struct sockaddr)); + memset(&addr, 0, sizeof(struct sockaddr_storage)); if (volume_info->UNCip && volume_info->UNC) { rc = cifs_inet_pton(AF_INET, volume_info->UNCip, @@ -1435,9 +1435,9 @@ cifs_get_tcp_session(struct smb_vol *volume_info) rc = cifs_inet_pton(AF_INET6, volume_info->UNCip, &sin_server6->sin6_addr.in6_u); if (rc > 0) - addr.sa_family = AF_INET6; + addr.ss_family = AF_INET6; } else { - addr.sa_family = AF_INET; + addr.ss_family = AF_INET; } if (rc <= 0) { @@ -1502,7 +1502,7 @@ cifs_get_tcp_session(struct smb_vol *volume_info) tcp_ses->tcpStatus = CifsNew; ++tcp_ses->srv_count; - if (addr.sa_family == AF_INET6) { + if (addr.ss_family == AF_INET6) { cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ /* other OS never observed in Wild doing 139 with v6 */ @@ -1802,7 +1802,7 @@ ipv4_connect(struct TCP_Server_Info *server) * user space buffer */ socket->sk->sk_rcvtimeo = 7 * HZ; - socket->sk->sk_sndtimeo = 3 * HZ; + socket->sk->sk_sndtimeo = 5 * HZ; /* make the bufsizes depend on wsize/rsize and max requests */ if (server->noautotune) { @@ -1860,9 +1860,7 @@ ipv4_connect(struct TCP_Server_Info *server) smb_buf = (struct smb_hdr *)ses_init_buf; /* sizeof RFC1002_SESSION_REQUEST with no scope */ smb_buf->smb_buf_length = 0x81000044; - rc = smb_send(socket, smb_buf, 0x44, - (struct sockaddr *) &server->addr.sockAddr, - server->noblocksnd); + rc = smb_send(server, smb_buf, 0x44); kfree(ses_init_buf); msleep(1); /* RFC1001 layer in at least one server requires very short break before negprot @@ -1955,7 +1953,7 @@ ipv6_connect(struct TCP_Server_Info *server) * user space buffer */ socket->sk->sk_rcvtimeo = 7 * HZ; - socket->sk->sk_sndtimeo = 3 * HZ; + socket->sk->sk_sndtimeo = 5 * HZ; server->ssocket = socket; return rc; diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 838d9c7..964aad0 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -129,6 +129,17 @@ cifs_bp_rename_retry: return full_path; } +static void setup_cifs_dentry(struct cifsTconInfo *tcon, + struct dentry *direntry, + struct inode *newinode) +{ + if (tcon->nocase) + direntry->d_op = &cifs_ci_dentry_ops; + else + direntry->d_op = &cifs_dentry_ops; + d_instantiate(direntry, newinode); +} + /* Inode operations in similar order to how they appear in Linux file fs.h */ int @@ -139,14 +150,14 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, int xid; int create_options = CREATE_NOT_DIR; int oplock = 0; + /* BB below access is too much for the mknod to request */ int desiredAccess = GENERIC_READ | GENERIC_WRITE; __u16 fileHandle; struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *pTcon; + struct cifsTconInfo *tcon; char *full_path = NULL; FILE_ALL_INFO *buf = NULL; struct inode *newinode = NULL; - struct cifsFileInfo *pCifsFile = NULL; struct cifsInodeInfo *pCifsInode; int disposition = FILE_OVERWRITE_IF; bool write_only = false; @@ -154,7 +165,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, xid = GetXid(); cifs_sb = CIFS_SB(inode->i_sb); - pTcon = cifs_sb->tcon; + tcon = cifs_sb->tcon; full_path = build_path_from_dentry(direntry); if (full_path == NULL) { @@ -162,6 +173,8 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, return -ENOMEM; } + mode &= ~current->fs->umask; + if (nd && (nd->flags & LOOKUP_OPEN)) { int oflags = nd->intent.open.flags; @@ -196,17 +209,15 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, return -ENOMEM; } - mode &= ~current->fs->umask; - /* * if we're not using unix extensions, see if we need to set * ATTR_READONLY on the create call */ - if (!pTcon->unix_ext && (mode & S_IWUGO) == 0) + if (!tcon->unix_ext && (mode & S_IWUGO) == 0) create_options |= CREATE_OPTION_READONLY; if (cifs_sb->tcon->ses->capabilities & CAP_NT_SMBS) - rc = CIFSSMBOpen(xid, pTcon, full_path, disposition, + rc = CIFSSMBOpen(xid, tcon, full_path, disposition, desiredAccess, create_options, &fileHandle, &oplock, buf, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); @@ -215,7 +226,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, if (rc == -EIO) { /* old server, retry the open legacy style */ - rc = SMBLegacyOpen(xid, pTcon, full_path, disposition, + rc = SMBLegacyOpen(xid, tcon, full_path, disposition, desiredAccess, create_options, &fileHandle, &oplock, buf, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); @@ -225,7 +236,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, } else { /* If Open reported that we actually created a file then we now have to set the mode if possible */ - if ((pTcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) { + if ((tcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) { struct cifs_unix_set_info_args args = { .mode = mode, .ctime = NO_CHANGE_64, @@ -244,20 +255,20 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, args.uid = NO_CHANGE_64; args.gid = NO_CHANGE_64; } - CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, + CIFSSMBUnixSetInfo(xid, tcon, full_path, &args, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); } else { /* BB implement mode setting via Windows security descriptors e.g. */ - /* CIFSSMBWinSetPerms(xid,pTcon,path,mode,-1,-1,nls);*/ + /* CIFSSMBWinSetPerms(xid,tcon,path,mode,-1,-1,nls);*/ /* Could set r/o dos attribute if mode & 0222 == 0 */ } /* server might mask mode so we have to query for it */ - if (pTcon->unix_ext) + if (tcon->unix_ext) rc = cifs_get_inode_info_unix(&newinode, full_path, inode->i_sb, xid); else { @@ -283,22 +294,17 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, } if (rc != 0) { - cFYI(1, - ("Create worked but get_inode_info failed rc = %d", - rc)); - } else { - if (pTcon->nocase) - direntry->d_op = &cifs_ci_dentry_ops; - else - direntry->d_op = &cifs_dentry_ops; - d_instantiate(direntry, newinode); - } + cFYI(1, ("Create worked, get_inode_info failed rc = %d", + rc)); + } else + setup_cifs_dentry(tcon, direntry, newinode); + if ((nd == NULL /* nfsd case - nfs srv does not set nd */) || (!(nd->flags & LOOKUP_OPEN))) { /* mknod case - do not leave file open */ - CIFSSMBClose(xid, pTcon, fileHandle); + CIFSSMBClose(xid, tcon, fileHandle); } else if (newinode) { - pCifsFile = + struct cifsFileInfo *pCifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL); if (pCifsFile == NULL) @@ -316,7 +322,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, /* set the following in open now pCifsFile->pfile = file; */ write_lock(&GlobalSMBSeslock); - list_add(&pCifsFile->tlist, &pTcon->openFileList); + list_add(&pCifsFile->tlist, &tcon->openFileList); pCifsInode = CIFS_I(newinode); if (pCifsInode) { /* if readable file instance put first in list*/ diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 5ab9896..bcf7b51 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1285,6 +1285,11 @@ int cifs_rmdir(struct inode *inode, struct dentry *direntry) cifsInode = CIFS_I(direntry->d_inode); cifsInode->time = 0; /* force revalidate to go get info when needed */ + + cifsInode = CIFS_I(inode); + cifsInode->time = 0; /* force revalidate to get parent dir info + since cached search results now invalid */ + direntry->d_inode->i_ctime = inode->i_ctime = inode->i_mtime = current_fs_time(inode->i_sb); diff --git a/fs/cifs/md5.c b/fs/cifs/md5.c index 462bbfe..98b66a5 100644 --- a/fs/cifs/md5.c +++ b/fs/cifs/md5.c @@ -10,8 +10,8 @@ * with every copy. * * To compute the message digest of a chunk of bytes, declare an - * MD5Context structure, pass it to MD5Init, call MD5Update as - * needed on buffers full of bytes, and then call MD5Final, which + * MD5Context structure, pass it to cifs_MD5_init, call cifs_MD5_update as + * needed on buffers full of bytes, and then call cifs_MD5_final, which * will fill a supplied 16-byte array with the digest. */ @@ -45,7 +45,7 @@ byteReverse(unsigned char *buf, unsigned longs) * initialization constants. */ void -MD5Init(struct MD5Context *ctx) +cifs_MD5_init(struct MD5Context *ctx) { ctx->buf[0] = 0x67452301; ctx->buf[1] = 0xefcdab89; @@ -61,7 +61,7 @@ MD5Init(struct MD5Context *ctx) * of bytes. */ void -MD5Update(struct MD5Context *ctx, unsigned char const *buf, unsigned len) +cifs_MD5_update(struct MD5Context *ctx, unsigned char const *buf, unsigned len) { register __u32 t; @@ -110,7 +110,7 @@ MD5Update(struct MD5Context *ctx, unsigned char const *buf, unsigned len) * 1 0* (64-bit count of bits processed, MSB-first) */ void -MD5Final(unsigned char digest[16], struct MD5Context *ctx) +cifs_MD5_final(unsigned char digest[16], struct MD5Context *ctx) { unsigned int count; unsigned char *p; @@ -165,7 +165,7 @@ MD5Final(unsigned char digest[16], struct MD5Context *ctx) /* * The core of the MD5 algorithm, this alters an existing MD5 hash to - * reflect the addition of 16 longwords of new data. MD5Update blocks + * reflect the addition of 16 longwords of new data. cifs_MD5_update blocks * the data and converts bytes into longwords for this routine. */ static void @@ -267,9 +267,9 @@ hmac_md5_init_rfc2104(unsigned char *key, int key_len, unsigned char tk[16]; struct MD5Context tctx; - MD5Init(&tctx); - MD5Update(&tctx, key, key_len); - MD5Final(tk, &tctx); + cifs_MD5_init(&tctx); + cifs_MD5_update(&tctx, key, key_len); + cifs_MD5_final(tk, &tctx); key = tk; key_len = 16; @@ -287,8 +287,8 @@ hmac_md5_init_rfc2104(unsigned char *key, int key_len, ctx->k_opad[i] ^= 0x5c; } - MD5Init(&ctx->ctx); - MD5Update(&ctx->ctx, ctx->k_ipad, 64); + cifs_MD5_init(&ctx->ctx); + cifs_MD5_update(&ctx->ctx, ctx->k_ipad, 64); } #endif @@ -317,8 +317,8 @@ hmac_md5_init_limK_to_64(const unsigned char *key, int key_len, ctx->k_opad[i] ^= 0x5c; } - MD5Init(&ctx->ctx); - MD5Update(&ctx->ctx, ctx->k_ipad, 64); + cifs_MD5_init(&ctx->ctx); + cifs_MD5_update(&ctx->ctx, ctx->k_ipad, 64); } /*********************************************************************** @@ -328,7 +328,7 @@ void hmac_md5_update(const unsigned char *text, int text_len, struct HMACMD5Context *ctx) { - MD5Update(&ctx->ctx, text, text_len); /* then text of datagram */ + cifs_MD5_update(&ctx->ctx, text, text_len); /* then text of datagram */ } /*********************************************************************** @@ -339,12 +339,12 @@ hmac_md5_final(unsigned char *digest, struct HMACMD5Context *ctx) { struct MD5Context ctx_o; - MD5Final(digest, &ctx->ctx); + cifs_MD5_final(digest, &ctx->ctx); - MD5Init(&ctx_o); - MD5Update(&ctx_o, ctx->k_opad, 64); - MD5Update(&ctx_o, digest, 16); - MD5Final(digest, &ctx_o); + cifs_MD5_init(&ctx_o); + cifs_MD5_update(&ctx_o, ctx->k_opad, 64); + cifs_MD5_update(&ctx_o, digest, 16); + cifs_MD5_final(digest, &ctx_o); } /*********************************************************** diff --git a/fs/cifs/md5.h b/fs/cifs/md5.h index f7d4f41..6fba8cb 100644 --- a/fs/cifs/md5.h +++ b/fs/cifs/md5.h @@ -20,10 +20,10 @@ struct HMACMD5Context { }; #endif /* _HMAC_MD5_H */ -void MD5Init(struct MD5Context *context); -void MD5Update(struct MD5Context *context, unsigned char const *buf, +void cifs_MD5_init(struct MD5Context *context); +void cifs_MD5_update(struct MD5Context *context, unsigned char const *buf, unsigned len); -void MD5Final(unsigned char digest[16], struct MD5Context *context); +void cifs_MD5_final(unsigned char digest[16], struct MD5Context *context); /* The following definitions come from lib/hmacmd5.c */ diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 7ebe659..0ad3e2d 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -154,81 +154,8 @@ void DeleteTconOplockQEntries(struct cifsTconInfo *tcon) spin_unlock(&GlobalMid_Lock); } -int -smb_send(struct socket *ssocket, struct smb_hdr *smb_buffer, - unsigned int smb_buf_length, struct sockaddr *sin, bool noblocksnd) -{ - int rc = 0; - int i = 0; - struct msghdr smb_msg; - struct kvec iov; - unsigned len = smb_buf_length + 4; - - if (ssocket == NULL) - return -ENOTSOCK; /* BB eventually add reconnect code here */ - iov.iov_base = smb_buffer; - iov.iov_len = len; - - smb_msg.msg_name = sin; - smb_msg.msg_namelen = sizeof(struct sockaddr); - smb_msg.msg_control = NULL; - smb_msg.msg_controllen = 0; - if (noblocksnd) - smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; - else - smb_msg.msg_flags = MSG_NOSIGNAL; - - /* smb header is converted in header_assemble. bcc and rest of SMB word - area, and byte area if necessary, is converted to littleendian in - cifssmb.c and RFC1001 len is converted to bigendian in smb_send - Flags2 is converted in SendReceive */ - - smb_buffer->smb_buf_length = cpu_to_be32(smb_buffer->smb_buf_length); - cFYI(1, ("Sending smb of length %d", smb_buf_length)); - dump_smb(smb_buffer, len); - - while (len > 0) { - rc = kernel_sendmsg(ssocket, &smb_msg, &iov, 1, len); - if ((rc == -ENOSPC) || (rc == -EAGAIN)) { - i++; - /* smaller timeout here than send2 since smaller size */ - /* Although it may not be required, this also is smaller - oplock break time */ - if (i > 12) { - cERROR(1, - ("sends on sock %p stuck for 7 seconds", - ssocket)); - rc = -EAGAIN; - break; - } - msleep(1 << i); - continue; - } - if (rc < 0) - break; - else - i = 0; /* reset i after each successful send */ - iov.iov_base += rc; - iov.iov_len -= rc; - len -= rc; - } - - if (rc < 0) { - cERROR(1, ("Error %d sending data on socket to server", rc)); - } else { - rc = 0; - } - - /* Don't want to modify the buffer as a - side effect of this call. */ - smb_buffer->smb_buf_length = smb_buf_length; - - return rc; -} - static int -smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec, - struct sockaddr *sin, bool noblocksnd) +smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec) { int rc = 0; int i = 0; @@ -243,11 +170,11 @@ smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec, if (ssocket == NULL) return -ENOTSOCK; /* BB eventually add reconnect code here */ - smb_msg.msg_name = sin; + smb_msg.msg_name = (struct sockaddr *) &server->addr.sockAddr; smb_msg.msg_namelen = sizeof(struct sockaddr); smb_msg.msg_control = NULL; smb_msg.msg_controllen = 0; - if (noblocksnd) + if (server->noblocksnd) smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; else smb_msg.msg_flags = MSG_NOSIGNAL; @@ -272,7 +199,25 @@ smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec, n_vec - first_vec, total_len); if ((rc == -ENOSPC) || (rc == -EAGAIN)) { i++; - if (i >= 14) { + /* if blocking send we try 3 times, since each can block + for 5 seconds. For nonblocking we have to try more + but wait increasing amounts of time allowing time for + socket to clear. The overall time we wait in either + case to send on the socket is about 15 seconds. + Similarly we wait for 15 seconds for + a response from the server in SendReceive[2] + for the server to send a response back for + most types of requests (except SMB Write + past end of file which can be slow, and + blocking lock operations). NFS waits slightly longer + than CIFS, but this can make it take longer for + nonresponsive servers to be detected and 15 seconds + is more than enough time for modern networks to + send a packet. In most cases if we fail to send + after the retries we will kill the socket and + reconnect which may clear the network problem. + */ + if ((i >= 14) || (!server->noblocksnd && (i > 2))) { cERROR(1, ("sends on sock %p stuck for 15 seconds", ssocket)); @@ -339,6 +284,18 @@ smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec, return rc; } +int +smb_send(struct TCP_Server_Info *server, struct smb_hdr *smb_buffer, + unsigned int smb_buf_length) +{ + struct kvec iov; + + iov.iov_base = smb_buffer; + iov.iov_len = smb_buf_length + 4; + + return smb_sendv(server, &iov, 1); +} + static int wait_for_free_request(struct cifsSesInfo *ses, const int long_op) { if (long_op == CIFS_ASYNC_OP) { @@ -540,9 +497,7 @@ SendReceive2(const unsigned int xid, struct cifsSesInfo *ses, #ifdef CONFIG_CIFS_STATS2 atomic_inc(&ses->server->inSend); #endif - rc = smb_send2(ses->server, iov, n_vec, - (struct sockaddr *) &(ses->server->addr.sockAddr), - ses->server->noblocksnd); + rc = smb_sendv(ses->server, iov, n_vec); #ifdef CONFIG_CIFS_STATS2 atomic_dec(&ses->server->inSend); midQ->when_sent = jiffies; @@ -736,9 +691,7 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses, #ifdef CONFIG_CIFS_STATS2 atomic_inc(&ses->server->inSend); #endif - rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length, - (struct sockaddr *) &(ses->server->addr.sockAddr), - ses->server->noblocksnd); + rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length); #ifdef CONFIG_CIFS_STATS2 atomic_dec(&ses->server->inSend); midQ->when_sent = jiffies; @@ -879,9 +832,7 @@ send_nt_cancel(struct cifsTconInfo *tcon, struct smb_hdr *in_buf, mutex_unlock(&ses->server->srv_mutex); return rc; } - rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length, - (struct sockaddr *) &(ses->server->addr.sockAddr), - ses->server->noblocksnd); + rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length); mutex_unlock(&ses->server->srv_mutex); return rc; } @@ -973,9 +924,7 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon, #ifdef CONFIG_CIFS_STATS2 atomic_inc(&ses->server->inSend); #endif - rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length, - (struct sockaddr *) &(ses->server->addr.sockAddr), - ses->server->noblocksnd); + rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length); #ifdef CONFIG_CIFS_STATS2 atomic_dec(&ses->server->inSend); midQ->when_sent = jiffies; diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 5235c67..c8f8d59 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -538,6 +538,7 @@ static int dev_ifsioc(unsigned int fd, unsigned int cmd, unsigned long arg) * cannot be fixed without breaking all existing apps. */ case TUNSETIFF: + case TUNGETIFF: case SIOCGIFFLAGS: case SIOCGIFMETRIC: case SIOCGIFMTU: @@ -1982,6 +1983,11 @@ COMPATIBLE_IOCTL(TUNSETNOCSUM) COMPATIBLE_IOCTL(TUNSETDEBUG) COMPATIBLE_IOCTL(TUNSETPERSIST) COMPATIBLE_IOCTL(TUNSETOWNER) +COMPATIBLE_IOCTL(TUNSETLINK) +COMPATIBLE_IOCTL(TUNSETGROUP) +COMPATIBLE_IOCTL(TUNGETFEATURES) +COMPATIBLE_IOCTL(TUNSETOFFLOAD) +COMPATIBLE_IOCTL(TUNSETTXFILTER) /* Big V */ COMPATIBLE_IOCTL(VT_SETMODE) COMPATIBLE_IOCTL(VT_GETMODE) @@ -2573,6 +2579,7 @@ HANDLE_IOCTL(SIOCGIFPFLAGS, dev_ifsioc) HANDLE_IOCTL(SIOCGIFTXQLEN, dev_ifsioc) HANDLE_IOCTL(SIOCSIFTXQLEN, dev_ifsioc) HANDLE_IOCTL(TUNSETIFF, dev_ifsioc) +HANDLE_IOCTL(TUNGETIFF, dev_ifsioc) HANDLE_IOCTL(SIOCETHTOOL, ethtool_ioctl) HANDLE_IOCTL(SIOCBONDENSLAVE, bond_ioctl) HANDLE_IOCTL(SIOCBONDRELEASE, bond_ioctl) diff --git a/fs/eventpoll.c b/fs/eventpoll.c index ba2f9ec..011b9b8 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -234,8 +234,6 @@ struct ep_pqueue { /* * Configuration options available inside /proc/sys/fs/epoll/ */ -/* Maximum number of epoll devices, per user */ -static int max_user_instances __read_mostly; /* Maximum number of epoll watched descriptors, per user */ static int max_user_watches __read_mostly; @@ -261,14 +259,6 @@ static int zero; ctl_table epoll_table[] = { { - .procname = "max_user_instances", - .data = &max_user_instances, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec_minmax, - .extra1 = &zero, - }, - { .procname = "max_user_watches", .data = &max_user_watches, .maxlen = sizeof(int), @@ -491,7 +481,6 @@ static void ep_free(struct eventpoll *ep) mutex_unlock(&epmutex); mutex_destroy(&ep->mtx); - atomic_dec(&ep->user->epoll_devs); free_uid(ep->user); kfree(ep); } @@ -581,10 +570,6 @@ static int ep_alloc(struct eventpoll **pep) struct eventpoll *ep; user = get_current_user(); - error = -EMFILE; - if (unlikely(atomic_read(&user->epoll_devs) >= - max_user_instances)) - goto free_uid; error = -ENOMEM; ep = kzalloc(sizeof(*ep), GFP_KERNEL); if (unlikely(!ep)) @@ -1141,7 +1126,6 @@ SYSCALL_DEFINE1(epoll_create1, int, flags) flags & O_CLOEXEC); if (fd < 0) ep_free(ep); - atomic_inc(&ep->user->epoll_devs); error_return: DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n", @@ -1366,8 +1350,10 @@ static int __init eventpoll_init(void) struct sysinfo si; si_meminfo(&si); - max_user_instances = 128; - max_user_watches = (((si.totalram - si.totalhigh) / 32) << PAGE_SHIFT) / + /* + * Allows top 4% of lomem to be allocated for epoll watches (per user). + */ + max_user_watches = (((si.totalram - si.totalhigh) / 25) << PAGE_SHIFT) / EP_ITEM_COST; /* Initialize the structure used to perform safe poll wait head wake ups */ diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 69a3d19..4db4ffa 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -1358,7 +1358,7 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, struct fake_dirent *fde; blocksize = dir->i_sb->s_blocksize; - dxtrace(printk("Creating index\n")); + dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino)); retval = ext3_journal_get_write_access(handle, bh); if (retval) { ext3_std_error(dir->i_sb, retval); @@ -1367,6 +1367,19 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, } root = (struct dx_root *) bh->b_data; + /* The 0th block becomes the root, move the dirents out */ + fde = &root->dotdot; + de = (struct ext3_dir_entry_2 *)((char *)fde + + ext3_rec_len_from_disk(fde->rec_len)); + if ((char *) de >= (((char *) root) + blocksize)) { + ext3_error(dir->i_sb, __func__, + "invalid rec_len for '..' in inode %lu", + dir->i_ino); + brelse(bh); + return -EIO; + } + len = ((char *) root) + blocksize - (char *) de; + bh2 = ext3_append (handle, dir, &block, &retval); if (!(bh2)) { brelse(bh); @@ -1375,11 +1388,6 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, EXT3_I(dir)->i_flags |= EXT3_INDEX_FL; data1 = bh2->b_data; - /* The 0th block becomes the root, move the dirents out */ - fde = &root->dotdot; - de = (struct ext3_dir_entry_2 *)((char *)fde + - ext3_rec_len_from_disk(fde->rec_len)); - len = ((char *) root) + blocksize - (char *) de; memcpy (data1, de, len); de = (struct ext3_dir_entry_2 *) data1; top = data1 + len; diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index 6bba06b..9a50b80 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -684,15 +684,15 @@ ext4_fsblk_t ext4_count_free_blocks(struct super_block *sb) gdp = ext4_get_group_desc(sb, i, NULL); if (!gdp) continue; - desc_count += le16_to_cpu(gdp->bg_free_blocks_count); + desc_count += ext4_free_blks_count(sb, gdp); brelse(bitmap_bh); bitmap_bh = ext4_read_block_bitmap(sb, i); if (bitmap_bh == NULL) continue; x = ext4_count_free(bitmap_bh, sb->s_blocksize); - printk(KERN_DEBUG "group %lu: stored = %d, counted = %u\n", - i, le16_to_cpu(gdp->bg_free_blocks_count), x); + printk(KERN_DEBUG "group %u: stored = %d, counted = %u\n", + i, ext4_free_blks_count(sb, gdp), x); bitmap_count += x; } brelse(bitmap_bh); diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index c668e43..aafc9eb 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1206,8 +1206,11 @@ static inline void ext4_r_blocks_count_set(struct ext4_super_block *es, static inline loff_t ext4_isize(struct ext4_inode *raw_inode) { - return ((loff_t)le32_to_cpu(raw_inode->i_size_high) << 32) | - le32_to_cpu(raw_inode->i_size_lo); + if (S_ISREG(le16_to_cpu(raw_inode->i_mode))) + return ((loff_t)le32_to_cpu(raw_inode->i_size_high) << 32) | + le32_to_cpu(raw_inode->i_size_lo); + else + return (loff_t) le32_to_cpu(raw_inode->i_size_lo); } static inline void ext4_isize_set(struct ext4_inode *raw_inode, loff_t i_size) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 54bf062..e2eab19 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3048,7 +3048,7 @@ retry: WARN_ON(ret <= 0); printk(KERN_ERR "%s: ext4_ext_get_blocks " "returned error inode#%lu, block=%u, " - "max_blocks=%lu", __func__, + "max_blocks=%u", __func__, inode->i_ino, block, max_blocks); #endif ext4_mark_inode_dirty(handle, inode); diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a6444ce..03ba20b 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -360,9 +360,9 @@ static int ext4_block_to_path(struct inode *inode, final = ptrs; } else { ext4_warning(inode->i_sb, "ext4_block_to_path", - "block %lu > max", + "block %lu > max in inode %lu", i_block + direct_blocks + - indirect_blocks + double_blocks); + indirect_blocks + double_blocks, inode->i_ino); } if (boundary) *boundary = final - 1 - (i_block & (ptrs - 1)); @@ -2821,9 +2821,6 @@ static sector_t ext4_bmap(struct address_space *mapping, sector_t block) filemap_write_and_wait(mapping); } - BUG_ON(!EXT4_JOURNAL(inode) && - EXT4_I(inode)->i_state & EXT4_STATE_JDATA); - if (EXT4_JOURNAL(inode) && EXT4_I(inode)->i_state & EXT4_STATE_JDATA) { /* * This is a REALLY heavyweight approach, but the use of @@ -3622,7 +3619,7 @@ static void ext4_free_data(handle_t *handle, struct inode *inode, * block pointed to itself, it would have been detached when * the block was cleared. Check for this instead of OOPSing. */ - if (bh2jh(this_bh)) + if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh)) ext4_handle_dirty_metadata(handle, inode, this_bh); else ext4_error(inode->i_sb, __func__, diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 918aec0..deba54f 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -3025,7 +3025,7 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac, goto out_err; ext4_debug("using block group %u(%d)\n", ac->ac_b_ex.fe_group, - gdp->bg_free_blocks_count); + ext4_free_blks_count(sb, gdp)); err = ext4_journal_get_write_access(handle, gdp_bh); if (err) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index fec0b4c..ba702bd 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1368,7 +1368,7 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, struct fake_dirent *fde; blocksize = dir->i_sb->s_blocksize; - dxtrace(printk(KERN_DEBUG "Creating index\n")); + dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino)); retval = ext4_journal_get_write_access(handle, bh); if (retval) { ext4_std_error(dir->i_sb, retval); @@ -1377,6 +1377,20 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, } root = (struct dx_root *) bh->b_data; + /* The 0th block becomes the root, move the dirents out */ + fde = &root->dotdot; + de = (struct ext4_dir_entry_2 *)((char *)fde + + ext4_rec_len_from_disk(fde->rec_len)); + if ((char *) de >= (((char *) root) + blocksize)) { + ext4_error(dir->i_sb, __func__, + "invalid rec_len for '..' in inode %lu", + dir->i_ino); + brelse(bh); + return -EIO; + } + len = ((char *) root) + blocksize - (char *) de; + + /* Allocate new block for the 0th block's dirents */ bh2 = ext4_append(handle, dir, &block, &retval); if (!(bh2)) { brelse(bh); @@ -1385,11 +1399,6 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, EXT4_I(dir)->i_flags |= EXT4_INDEX_FL; data1 = bh2->b_data; - /* The 0th block becomes the root, move the dirents out */ - fde = &root->dotdot; - de = (struct ext4_dir_entry_2 *)((char *)fde + - ext4_rec_len_from_disk(fde->rec_len)); - len = ((char *) root) + blocksize - (char *) de; memcpy (data1, de, len); de = (struct ext4_dir_entry_2 *) data1; top = data1 + len; diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index c328be5..c06886a 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -861,12 +861,13 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input) gdp = (struct ext4_group_desc *)((char *)primary->b_data + gdb_off * EXT4_DESC_SIZE(sb)); + memset(gdp, 0, EXT4_DESC_SIZE(sb)); ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */ ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */ ext4_inode_table_set(sb, gdp, input->inode_table); /* LV FIXME */ ext4_free_blks_set(sb, gdp, input->free_blocks_count); ext4_free_inodes_set(sb, gdp, EXT4_INODES_PER_GROUP(sb)); - gdp->bg_flags |= cpu_to_le16(EXT4_BG_INODE_ZEROED); + gdp->bg_flags = cpu_to_le16(EXT4_BG_INODE_ZEROED); gdp->bg_checksum = ext4_group_desc_csum(sbi, input->group, gdp); /* diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 5667530..eb34300 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -37,10 +37,10 @@ #include <linux/proc_fs.h> #include <linux/debugfs.h> #include <linux/seq_file.h> +#include <linux/math64.h> #include <asm/uaccess.h> #include <asm/page.h> -#include <asm/div64.h> EXPORT_SYMBOL(jbd2_journal_start); EXPORT_SYMBOL(jbd2_journal_restart); @@ -846,8 +846,8 @@ static int jbd2_seq_info_show(struct seq_file *seq, void *v) jiffies_to_msecs(s->stats->u.run.rs_flushing / s->stats->ts_tid)); seq_printf(seq, " %ums logging transaction\n", jiffies_to_msecs(s->stats->u.run.rs_logging / s->stats->ts_tid)); - seq_printf(seq, " %luus average transaction commit time\n", - do_div(s->journal->j_average_commit_time, 1000)); + seq_printf(seq, " %lluus average transaction commit time\n", + div_u64(s->journal->j_average_commit_time, 1000)); seq_printf(seq, " %lu handles per transaction\n", s->stats->u.run.rs_handle_count / s->stats->ts_tid); seq_printf(seq, " %lu blocks per transaction\n", diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 12e9a29..2124c06 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -41,6 +41,7 @@ header-y += baycom.h header-y += bfs_fs.h header-y += blkpg.h header-y += bpqether.h +header-y += bsg.h header-y += can.h header-y += cdk.h header-y += chio.h diff --git a/include/linux/aio_abi.h b/include/linux/aio_abi.h index 9e01729..2c87316 100644 --- a/include/linux/aio_abi.h +++ b/include/linux/aio_abi.h @@ -27,6 +27,7 @@ #ifndef __LINUX__AIO_ABI_H #define __LINUX__AIO_ABI_H +#include <linux/types.h> #include <asm/byteorder.h> typedef unsigned long aio_context_t; diff --git a/include/linux/atalk.h b/include/linux/atalk.h index e9ebac2..d34c187 100644 --- a/include/linux/atalk.h +++ b/include/linux/atalk.h @@ -1,6 +1,7 @@ #ifndef __LINUX_ATALK_H__ #define __LINUX_ATALK_H__ +#include <linux/types.h> #include <asm/byteorder.h> /* diff --git a/include/linux/atmbr2684.h b/include/linux/atmbr2684.h index 52bf72a..fdb2629 100644 --- a/include/linux/atmbr2684.h +++ b/include/linux/atmbr2684.h @@ -1,6 +1,7 @@ #ifndef _LINUX_ATMBR2684_H #define _LINUX_ATMBR2684_H +#include <linux/types.h> #include <linux/atm.h> #include <linux/if.h> /* For IFNAMSIZ */ diff --git a/include/linux/auto_fs4.h b/include/linux/auto_fs4.h index 55fa478..8b49ac4 100644 --- a/include/linux/auto_fs4.h +++ b/include/linux/auto_fs4.h @@ -12,6 +12,7 @@ #define _LINUX_AUTO_FS4_H /* Include common v3 definitions */ +#include <linux/types.h> #include <linux/auto_fs.h> /* autofs v4 definitions */ diff --git a/include/linux/bfs_fs.h b/include/linux/bfs_fs.h index 8ed6dfdc..1c0b355 100644 --- a/include/linux/bfs_fs.h +++ b/include/linux/bfs_fs.h @@ -6,6 +6,8 @@ #ifndef _LINUX_BFS_FS_H #define _LINUX_BFS_FS_H +#include <linux/types.h> + #define BFS_BSIZE_BITS 9 #define BFS_BSIZE (1<<BFS_BSIZE_BITS) @@ -17,7 +19,6 @@ #define BFS_VDIR 2L #define BFS_VREG 1L - /* BFS inode layout on disk */ struct bfs_inode { __le16 i_ino; diff --git a/include/linux/bio.h b/include/linux/bio.h index 18462c5..2aa283a 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -144,7 +144,7 @@ struct bio { * bit 1 -- rw-ahead when set * bit 2 -- barrier * Insert a serialization point in the IO queue, forcing previously - * submitted IO to be completed before this oen is issued. + * submitted IO to be completed before this one is issued. * bit 3 -- synchronous I/O hint: the block layer will unplug immediately * Note that this does NOT indicate that the IO itself is sync, just * that the block layer will not postpone issue of this IO by plugging. @@ -163,12 +163,33 @@ struct bio { #define BIO_RW 0 /* Must match RW in req flags (blkdev.h) */ #define BIO_RW_AHEAD 1 /* Must match FAILFAST in req flags */ #define BIO_RW_BARRIER 2 -#define BIO_RW_SYNC 3 -#define BIO_RW_META 4 -#define BIO_RW_DISCARD 5 -#define BIO_RW_FAILFAST_DEV 6 -#define BIO_RW_FAILFAST_TRANSPORT 7 -#define BIO_RW_FAILFAST_DRIVER 8 +#define BIO_RW_SYNCIO 3 +#define BIO_RW_UNPLUG 4 +#define BIO_RW_META 5 +#define BIO_RW_DISCARD 6 +#define BIO_RW_FAILFAST_DEV 7 +#define BIO_RW_FAILFAST_TRANSPORT 8 +#define BIO_RW_FAILFAST_DRIVER 9 + +#define BIO_RW_SYNC (BIO_RW_SYNCIO | BIO_RW_UNPLUG) + +#define bio_rw_flagged(bio, flag) ((bio)->bi_rw & (1 << (flag))) + +/* + * Old defines, these should eventually be replaced by direct usage of + * bio_rw_flagged() + */ +#define bio_barrier(bio) bio_rw_flagged(bio, BIO_RW_BARRIER) +#define bio_sync(bio) bio_rw_flagged(bio, BIO_RW_SYNCIO) +#define bio_unplug(bio) bio_rw_flagged(bio, BIO_RW_UNPLUG) +#define bio_failfast_dev(bio) bio_rw_flagged(bio, BIO_RW_FAILFAST_DEV) +#define bio_failfast_transport(bio) \ + bio_rw_flagged(bio, BIO_RW_FAILFAST_TRANSPORT) +#define bio_failfast_driver(bio) \ + bio_rw_flagged(bio, BIO_RW_FAILFAST_DRIVER) +#define bio_rw_ahead(bio) bio_rw_flagged(bio, BIO_RW_AHEAD) +#define bio_rw_meta(bio) bio_rw_flagged(bio, BIO_RW_META) +#define bio_discard(bio) bio_rw_flagged(bio, BIO_RW_DISCARD) /* * upper 16 bits of bi_rw define the io priority of this bio @@ -193,15 +214,6 @@ struct bio { #define bio_offset(bio) bio_iovec((bio))->bv_offset #define bio_segments(bio) ((bio)->bi_vcnt - (bio)->bi_idx) #define bio_sectors(bio) ((bio)->bi_size >> 9) -#define bio_barrier(bio) ((bio)->bi_rw & (1 << BIO_RW_BARRIER)) -#define bio_sync(bio) ((bio)->bi_rw & (1 << BIO_RW_SYNC)) -#define bio_failfast_dev(bio) ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_DEV)) -#define bio_failfast_transport(bio) \ - ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_TRANSPORT)) -#define bio_failfast_driver(bio) ((bio)->bi_rw & (1 << BIO_RW_FAILFAST_DRIVER)) -#define bio_rw_ahead(bio) ((bio)->bi_rw & (1 << BIO_RW_AHEAD)) -#define bio_rw_meta(bio) ((bio)->bi_rw & (1 << BIO_RW_META)) -#define bio_discard(bio) ((bio)->bi_rw & (1 << BIO_RW_DISCARD)) #define bio_empty_barrier(bio) (bio_barrier(bio) && !bio_has_data(bio) && !bio_discard(bio)) static inline unsigned int bio_cur_sectors(struct bio *bio) @@ -312,7 +324,6 @@ struct bio_integrity_payload { void *bip_buf; /* generated integrity data */ bio_end_io_t *bip_end_io; /* saved I/O completion fn */ - int bip_error; /* saved I/O error */ unsigned int bip_size; unsigned short bip_pool; /* pool the ivec came from */ @@ -440,12 +451,13 @@ extern struct biovec_slab bvec_slabs[BIOVEC_NR_POOLS] __read_mostly; #ifdef CONFIG_HIGHMEM /* - * remember to add offset! and never ever reenable interrupts between a - * bvec_kmap_irq and bvec_kunmap_irq!! + * remember never ever reenable interrupts between a bvec_kmap_irq and + * bvec_kunmap_irq! * * This function MUST be inlined - it plays with the CPU interrupt flags. */ -static inline char *bvec_kmap_irq(struct bio_vec *bvec, unsigned long *flags) +static __always_inline char *bvec_kmap_irq(struct bio_vec *bvec, + unsigned long *flags) { unsigned long addr; @@ -461,7 +473,8 @@ static inline char *bvec_kmap_irq(struct bio_vec *bvec, unsigned long *flags) return (char *) addr + bvec->bv_offset; } -static inline void bvec_kunmap_irq(char *buffer, unsigned long *flags) +static __always_inline void bvec_kunmap_irq(char *buffer, + unsigned long *flags) { unsigned long ptr = (unsigned long) buffer & PAGE_MASK; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 044467e..dcaa0fd 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -108,6 +108,7 @@ enum rq_flag_bits { __REQ_RW_META, /* metadata io request */ __REQ_COPY_USER, /* contains copies of user pages */ __REQ_INTEGRITY, /* integrity metadata has been remapped */ + __REQ_UNPLUG, /* unplug queue on submission */ __REQ_NR_BITS, /* stops here */ }; @@ -134,6 +135,7 @@ enum rq_flag_bits { #define REQ_RW_META (1 << __REQ_RW_META) #define REQ_COPY_USER (1 << __REQ_COPY_USER) #define REQ_INTEGRITY (1 << __REQ_INTEGRITY) +#define REQ_UNPLUG (1 << __REQ_UNPLUG) #define BLK_MAX_CDB 16 @@ -449,6 +451,11 @@ struct request_queue #define QUEUE_FLAG_STACKABLE 13 /* supports request stacking */ #define QUEUE_FLAG_NONROT 14 /* non-rotational device (SSD) */ #define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */ +#define QUEUE_FLAG_IO_STAT 15 /* do IO stats */ + +#define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \ + (1 << QUEUE_FLAG_CLUSTER) | \ + (1 << QUEUE_FLAG_STACKABLE)) static inline int queue_is_locked(struct request_queue *q) { @@ -565,6 +572,7 @@ enum { #define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags) #define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags) #define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags) +#define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) #define blk_queue_flushing(q) ((q)->ordseq) #define blk_queue_stackable(q) \ test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags) diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h index 1dba349..25379cb 100644 --- a/include/linux/blktrace_api.h +++ b/include/linux/blktrace_api.h @@ -1,6 +1,7 @@ #ifndef BLKTRACE_H #define BLKTRACE_H +#include <linux/types.h> #ifdef __KERNEL__ #include <linux/blkdev.h> #include <linux/relay.h> diff --git a/include/linux/can/bcm.h b/include/linux/can/bcm.h index 7f29327..1432b27 100644 --- a/include/linux/can/bcm.h +++ b/include/linux/can/bcm.h @@ -14,6 +14,8 @@ #ifndef CAN_BCM_H #define CAN_BCM_H +#include <linux/types.h> + /** * struct bcm_msg_head - head of messages to/from the broadcast manager * @opcode: opcode, see enum below. diff --git a/include/linux/capability.h b/include/linux/capability.h index 02bdb76..1b98725 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -69,10 +69,6 @@ typedef struct __user_cap_data_struct { #define VFS_CAP_U32 VFS_CAP_U32_2 #define VFS_CAP_REVISION VFS_CAP_REVISION_2 -#ifdef CONFIG_SECURITY_FILE_CAPABILITIES -extern int file_caps_enabled; -#endif - struct vfs_cap_data { __le32 magic_etc; /* Little endian */ struct { @@ -96,6 +92,10 @@ struct vfs_cap_data { #define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3 #define _KERNEL_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_3 +#ifdef CONFIG_SECURITY_FILE_CAPABILITIES +extern int file_caps_enabled; +#endif + typedef struct kernel_cap_struct { __u32 cap[_KERNEL_CAPABILITY_U32S]; } kernel_cap_t; diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h index 0b49e08..78e9047 100644 --- a/include/linux/cdrom.h +++ b/include/linux/cdrom.h @@ -11,6 +11,7 @@ #ifndef _LINUX_CDROM_H #define _LINUX_CDROM_H +#include <linux/types.h> #include <asm/byteorder.h> /******************************************************* diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index e267e62..e4e8e11 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -99,6 +99,7 @@ static inline bool css_tryget(struct cgroup_subsys_state *css) while (!atomic_inc_not_zero(&css->refcnt)) { if (test_bit(CSS_REMOVED, &css->flags)) return false; + cpu_relax(); } return true; } diff --git a/include/linux/cgroupstats.h b/include/linux/cgroupstats.h index 4f53abf..3753c33 100644 --- a/include/linux/cgroupstats.h +++ b/include/linux/cgroupstats.h @@ -15,6 +15,7 @@ #ifndef _LINUX_CGROUPSTATS_H #define _LINUX_CGROUPSTATS_H +#include <linux/types.h> #include <linux/taskstats.h> /* diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h index cea1536..3a1dbba 100644 --- a/include/linux/clockchips.h +++ b/include/linux/clockchips.h @@ -36,6 +36,7 @@ enum clock_event_nofitiers { CLOCK_EVT_NOTIFY_BROADCAST_EXIT, CLOCK_EVT_NOTIFY_SUSPEND, CLOCK_EVT_NOTIFY_RESUME, + CLOCK_EVT_NOTIFY_CPU_DYING, CLOCK_EVT_NOTIFY_CPU_DEAD, }; diff --git a/include/linux/dlm_plock.h b/include/linux/dlm_plock.h index 18d5fdb..2dd2124 100644 --- a/include/linux/dlm_plock.h +++ b/include/linux/dlm_plock.h @@ -9,6 +9,8 @@ #ifndef __DLM_PLOCK_DOT_H__ #define __DLM_PLOCK_DOT_H__ +#include <linux/types.h> + #define DLM_PLOCK_MISC_NAME "dlm_plock" #define DLM_PLOCK_VERSION_MAJOR 1 diff --git a/include/linux/dn.h b/include/linux/dn.h index 02bba04..fe99908 100644 --- a/include/linux/dn.h +++ b/include/linux/dn.h @@ -1,6 +1,8 @@ #ifndef _LINUX_DN_H #define _LINUX_DN_H +#include <linux/types.h> + /* DECnet Data Structures and Constants diff --git a/include/linux/dvb/audio.h b/include/linux/dvb/audio.h index 89412e1..bb0df2a 100644 --- a/include/linux/dvb/audio.h +++ b/include/linux/dvb/audio.h @@ -24,12 +24,7 @@ #ifndef _DVBAUDIO_H_ #define _DVBAUDIO_H_ -#ifdef __KERNEL__ #include <linux/types.h> -#else -#include <stdint.h> -#endif - typedef enum { AUDIO_SOURCE_DEMUX, /* Select the demux as the main source */ diff --git a/include/linux/dvb/dmx.h b/include/linux/dvb/dmx.h index 402fb7a..fef9437 100644 --- a/include/linux/dvb/dmx.h +++ b/include/linux/dvb/dmx.h @@ -24,7 +24,7 @@ #ifndef _DVBDMX_H_ #define _DVBDMX_H_ -#include <asm/types.h> +#include <linux/types.h> #ifdef __KERNEL__ #include <linux/time.h> #else diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 55026b1..51c8d2d 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -26,8 +26,7 @@ #ifndef _DVBFRONTEND_H_ #define _DVBFRONTEND_H_ -#include <asm/types.h> - +#include <linux/types.h> typedef enum fe_type { FE_QPSK, diff --git a/include/linux/dvb/net.h b/include/linux/dvb/net.h index 5be474b..f451e7e 100644 --- a/include/linux/dvb/net.h +++ b/include/linux/dvb/net.h @@ -24,8 +24,7 @@ #ifndef _DVBNET_H_ #define _DVBNET_H_ -#include <asm/types.h> - +#include <linux/types.h> struct dvb_net_if { __u16 pid; diff --git a/include/linux/dvb/video.h b/include/linux/dvb/video.h index 50839fe..bd49c3e 100644 --- a/include/linux/dvb/video.h +++ b/include/linux/dvb/video.h @@ -24,17 +24,14 @@ #ifndef _DVBVIDEO_H_ #define _DVBVIDEO_H_ -#include <linux/compiler.h> - -#ifdef __KERNEL__ #include <linux/types.h> +#ifdef __KERNEL__ +#include <linux/compiler.h> #else -#include <asm/types.h> #include <stdint.h> #include <time.h> #endif - typedef enum { VIDEO_FORMAT_4_3, /* Select 4:3 format */ VIDEO_FORMAT_16_9, /* Select 16:9 format. */ diff --git a/include/linux/edd.h b/include/linux/edd.h index 5d747c5..4cbd0fe 100644 --- a/include/linux/edd.h +++ b/include/linux/edd.h @@ -30,6 +30,8 @@ #ifndef _LINUX_EDD_H #define _LINUX_EDD_H +#include <linux/types.h> + #define EDDNR 0x1e9 /* addr of number of edd_info structs at EDDBUF in boot_params - treat this as 1 byte */ #define EDDBUF 0xd00 /* addr of edd_info structs in boot_params */ diff --git a/include/linux/efs_fs_sb.h b/include/linux/efs_fs_sb.h index ff1945e..a01be90 100644 --- a/include/linux/efs_fs_sb.h +++ b/include/linux/efs_fs_sb.h @@ -9,6 +9,7 @@ #ifndef __EFS_FS_SB_H__ #define __EFS_FS_SB_H__ +#include <linux/types.h> #include <linux/magic.h> /* EFS superblock magic numbers */ diff --git a/include/linux/elf-fdpic.h b/include/linux/elf-fdpic.h index 9f5b745..7cd2e80 100644 --- a/include/linux/elf-fdpic.h +++ b/include/linux/elf-fdpic.h @@ -58,11 +58,13 @@ struct elf_fdpic_params { #define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */ }; +#ifdef __KERNEL__ #ifdef CONFIG_MMU extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, struct elf_fdpic_params *interp_params, unsigned long *start_stack, unsigned long *start_brk); #endif +#endif /* __KERNEL__ */ #endif /* _LINUX_ELF_FDPIC_H */ diff --git a/include/linux/elf.h b/include/linux/elf.h index 0b61ca4..45a937b 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -377,6 +377,7 @@ typedef struct elf64_note { Elf64_Word n_type; /* Content type */ } Elf64_Nhdr; +#ifdef __KERNEL__ #if ELF_CLASS == ELFCLASS32 extern Elf32_Dyn _DYNAMIC []; @@ -404,5 +405,5 @@ static inline int elf_coredump_extra_notes_write(struct file *file, extern int elf_coredump_extra_notes_size(void); extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset); #endif - +#endif /* __KERNEL__ */ #endif /* _LINUX_ELF_H */ diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h index 92f8d4f..ceb1454 100644 --- a/include/linux/errqueue.h +++ b/include/linux/errqueue.h @@ -1,6 +1,8 @@ #ifndef _LINUX_ERRQUEUE_H #define _LINUX_ERRQUEUE_H 1 +#include <linux/types.h> + struct sock_extended_err { __u32 ee_errno; diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h index 7da02c9..b834ef6 100644 --- a/include/linux/genetlink.h +++ b/include/linux/genetlink.h @@ -1,6 +1,7 @@ #ifndef __LINUX_GENERIC_NETLINK_H #define __LINUX_GENERIC_NETLINK_H +#include <linux/types.h> #include <linux/netlink.h> #define GENL_NAMSIZ 16 /* length of family name */ diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h index 14d0df0..c56b4bc 100644 --- a/include/linux/gfs2_ondisk.h +++ b/include/linux/gfs2_ondisk.h @@ -10,6 +10,8 @@ #ifndef __GFS2_ONDISK_DOT_H__ #define __GFS2_ONDISK_DOT_H__ +#include <linux/types.h> + #define GFS2_MAGIC 0x01161970 #define GFS2_BASIC_BLOCK 512 #define GFS2_BASIC_BLOCK_SHIFT 9 diff --git a/include/linux/hid.h b/include/linux/hid.h index 81aa84d..fa8ee9c 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -791,6 +791,7 @@ dbg_hid(const char *fmt, ...) __FILE__ , ## arg) #endif /* HID_FF */ +#ifdef __KERNEL__ #ifdef CONFIG_HID_COMPAT #define HID_COMPAT_LOAD_DRIVER(name) \ /* prototype to avoid sparse warning */ \ @@ -804,6 +805,7 @@ EXPORT_SYMBOL(hid_compat_##name) extern void hid_compat_##name(void); \ hid_compat_##name(); \ } while (0) +#endif /* __KERNEL__ */ #endif diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h index c760ae0..bb6f58b 100644 --- a/include/linux/hiddev.h +++ b/include/linux/hiddev.h @@ -27,6 +27,8 @@ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic */ +#include <linux/types.h> + /* * The event structure itself */ diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h index a93a8dd..10d701e 100644 --- a/include/linux/icmpv6.h +++ b/include/linux/icmpv6.h @@ -1,6 +1,7 @@ #ifndef _LINUX_ICMPV6_H #define _LINUX_ICMPV6_H +#include <linux/types.h> #include <asm/byteorder.h> struct icmp6hdr { diff --git a/include/linux/if_addr.h b/include/linux/if_addr.h index 43f3bed..a60c821 100644 --- a/include/linux/if_addr.h +++ b/include/linux/if_addr.h @@ -1,6 +1,7 @@ #ifndef __LINUX_IF_ADDR_H #define __LINUX_IF_ADDR_H +#include <linux/types.h> #include <linux/netlink.h> struct ifaddrmsg diff --git a/include/linux/if_addrlabel.h b/include/linux/if_addrlabel.h index 9fe79c9..89571f6 100644 --- a/include/linux/if_addrlabel.h +++ b/include/linux/if_addrlabel.h @@ -10,6 +10,8 @@ #ifndef __LINUX_IF_ADDRLABEL_H #define __LINUX_IF_ADDRLABEL_H +#include <linux/types.h> + struct ifaddrlblmsg { __u8 ifal_family; /* Address family */ diff --git a/include/linux/if_fc.h b/include/linux/if_fc.h index 376a34e..6ed7f1b 100644 --- a/include/linux/if_fc.h +++ b/include/linux/if_fc.h @@ -20,6 +20,7 @@ #ifndef _LINUX_IF_FC_H #define _LINUX_IF_FC_H +#include <linux/types.h> #define FC_ALEN 6 /* Octets in one ethernet addr */ #define FC_HLEN (sizeof(struct fch_hdr)+sizeof(struct fcllc)) diff --git a/include/linux/if_hippi.h b/include/linux/if_hippi.h index f0f2351..4a7c994 100644 --- a/include/linux/if_hippi.h +++ b/include/linux/if_hippi.h @@ -22,6 +22,7 @@ #ifndef _LINUX_IF_HIPPI_H #define _LINUX_IF_HIPPI_H +#include <linux/types.h> #include <asm/byteorder.h> /* diff --git a/include/linux/if_link.h b/include/linux/if_link.h index f9032c8..176c518 100644 --- a/include/linux/if_link.h +++ b/include/linux/if_link.h @@ -1,6 +1,7 @@ #ifndef _LINUX_IF_LINK_H #define _LINUX_IF_LINK_H +#include <linux/types.h> #include <linux/netlink.h> /* The struct should be in sync with struct net_device_stats */ diff --git a/include/linux/if_ppp.h b/include/linux/if_ppp.h index c3b1f85..fcef103 100644 --- a/include/linux/if_ppp.h +++ b/include/linux/if_ppp.h @@ -33,6 +33,7 @@ #ifndef _IF_PPP_H_ #define _IF_PPP_H_ +#include <linux/types.h> #include <linux/compiler.h> /* diff --git a/include/linux/if_strip.h b/include/linux/if_strip.h index fb5c5c9..6526a62 100644 --- a/include/linux/if_strip.h +++ b/include/linux/if_strip.h @@ -18,6 +18,8 @@ #ifndef __LINUX_STRIP_H #define __LINUX_STRIP_H +#include <linux/types.h> + typedef struct { __u8 c[6]; } MetricomAddress; diff --git a/include/linux/if_tr.h b/include/linux/if_tr.h index 5bcec8b..fc23aeb 100644 --- a/include/linux/if_tr.h +++ b/include/linux/if_tr.h @@ -19,6 +19,7 @@ #ifndef _LINUX_IF_TR_H #define _LINUX_IF_TR_H +#include <linux/types.h> #include <asm/byteorder.h> /* For __be16 */ /* IEEE 802.5 Token-Ring magic constants. The frame sizes omit the preamble diff --git a/include/linux/igmp.h b/include/linux/igmp.h index f734a0b..92fbd8c 100644 --- a/include/linux/igmp.h +++ b/include/linux/igmp.h @@ -16,6 +16,7 @@ #ifndef _LINUX_IGMP_H #define _LINUX_IGMP_H +#include <linux/types.h> #include <asm/byteorder.h> /* diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h index 6e8bc54..bc8c490 100644 --- a/include/linux/inet_diag.h +++ b/include/linux/inet_diag.h @@ -1,6 +1,8 @@ #ifndef _INET_DIAG_H_ #define _INET_DIAG_H_ 1 +#include <linux/types.h> + /* Just some random number */ #define TCPDIAG_GETSOCK 18 #define DCCPDIAG_GETSOCK 19 diff --git a/include/linux/ip6_tunnel.h b/include/linux/ip6_tunnel.h index 1e7cc4a..acb9ad6 100644 --- a/include/linux/ip6_tunnel.h +++ b/include/linux/ip6_tunnel.h @@ -1,6 +1,8 @@ #ifndef _IP6_TUNNEL_H #define _IP6_TUNNEL_H +#include <linux/types.h> + #define IPV6_TLV_TNL_ENCAP_LIMIT 4 #define IPV6_DEFAULT_TNL_ENCAP_LIMIT 4 diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 0b816cae..476d946 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -1,6 +1,7 @@ #ifndef _IPV6_H #define _IPV6_H +#include <linux/types.h> #include <linux/in6.h> #include <asm/byteorder.h> diff --git a/include/linux/ipv6_route.h b/include/linux/ipv6_route.h index b323ff5..1e7d8af 100644 --- a/include/linux/ipv6_route.h +++ b/include/linux/ipv6_route.h @@ -13,6 +13,8 @@ #ifndef _LINUX_IPV6_ROUTE_H #define _LINUX_IPV6_ROUTE_H +#include <linux/types.h> + #define RTF_DEFAULT 0x00010000 /* default - learned via ND */ #define RTF_ALLONLINK 0x00020000 /* (deprecated and will be removed) fallback, no routers on link */ diff --git a/include/linux/ipx.h b/include/linux/ipx.h index eb19b4e..aabb1d2 100644 --- a/include/linux/ipx.h +++ b/include/linux/ipx.h @@ -1,5 +1,6 @@ #ifndef _IPX_H_ #define _IPX_H_ +#include <linux/types.h> #include <linux/sockios.h> #include <linux/socket.h> #define IPX_NODE_LEN 6 diff --git a/include/linux/irda.h b/include/linux/irda.h index 28f88ec..00bdad0 100644 --- a/include/linux/irda.h +++ b/include/linux/irda.h @@ -25,6 +25,8 @@ #ifndef KERNEL_IRDA_H #define KERNEL_IRDA_H +#include <linux/types.h> + /* Please do *not* add any #include in this file, this file is * included as-is in user space. * Please fix the calling file to properly included needed files before diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index b45109c..b28b37e 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -308,7 +308,8 @@ void buffer_assertion_failure(struct buffer_head *bh); int val = (expr); \ if (!val) { \ printk(KERN_ERR \ - "EXT3-fs unexpected failure: %s;\n",# expr); \ + "JBD2 unexpected failure: %s: %s;\n", \ + __func__, #expr); \ printk(KERN_ERR why "\n"); \ } \ val; \ diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index d6ea19e..32851ee 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -49,6 +49,13 @@ /* Attach to insert probes on any functions which should be ignored*/ #define __kprobes __attribute__((__section__(".kprobes.text"))) notrace +#else /* CONFIG_KPROBES */ +typedef int kprobe_opcode_t; +struct arch_specific_insn { + int dummy; +}; +#define __kprobes notrace +#endif /* CONFIG_KPROBES */ struct kprobe; struct pt_regs; @@ -131,23 +138,6 @@ struct jprobe { /* For backward compatibility with old code using JPROBE_ENTRY() */ #define JPROBE_ENTRY(handler) (handler) -DECLARE_PER_CPU(struct kprobe *, current_kprobe); -DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); - -#ifdef CONFIG_KRETPROBES -extern void arch_prepare_kretprobe(struct kretprobe_instance *ri, - struct pt_regs *regs); -extern int arch_trampoline_kprobe(struct kprobe *p); -#else /* CONFIG_KRETPROBES */ -static inline void arch_prepare_kretprobe(struct kretprobe *rp, - struct pt_regs *regs) -{ -} -static inline int arch_trampoline_kprobe(struct kprobe *p) -{ - return 0; -} -#endif /* CONFIG_KRETPROBES */ /* * Function-return probe - * Note: @@ -188,6 +178,25 @@ struct kprobe_blackpoint { unsigned long range; }; +#ifdef CONFIG_KPROBES +DECLARE_PER_CPU(struct kprobe *, current_kprobe); +DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + +#ifdef CONFIG_KRETPROBES +extern void arch_prepare_kretprobe(struct kretprobe_instance *ri, + struct pt_regs *regs); +extern int arch_trampoline_kprobe(struct kprobe *p); +#else /* CONFIG_KRETPROBES */ +static inline void arch_prepare_kretprobe(struct kretprobe *rp, + struct pt_regs *regs) +{ +} +static inline int arch_trampoline_kprobe(struct kprobe *p) +{ + return 0; +} +#endif /* CONFIG_KRETPROBES */ + extern struct kretprobe_blackpoint kretprobe_blacklist[]; static inline void kretprobe_assert(struct kretprobe_instance *ri, @@ -264,10 +273,6 @@ void recycle_rp_inst(struct kretprobe_instance *ri, struct hlist_head *head); #else /* CONFIG_KPROBES */ -#define __kprobes notrace -struct jprobe; -struct kretprobe; - static inline struct kprobe *get_kprobe(void *addr) { return NULL; diff --git a/include/linux/minix_fs.h b/include/linux/minix_fs.h index 0e39745..13fe09e 100644 --- a/include/linux/minix_fs.h +++ b/include/linux/minix_fs.h @@ -1,6 +1,7 @@ #ifndef _LINUX_MINIX_FS_H #define _LINUX_MINIX_FS_H +#include <linux/types.h> #include <linux/magic.h> /* diff --git a/include/linux/module.h b/include/linux/module.h index 4f7ea12..f3b8329 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -219,11 +219,6 @@ void *__symbol_get_gpl(const char *symbol); #endif -struct module_ref -{ - local_t count; -} ____cacheline_aligned; - enum module_state { MODULE_STATE_LIVE, @@ -344,8 +339,11 @@ struct module /* Destruction function. */ void (*exit)(void); - /* Reference counts */ - struct module_ref ref[NR_CPUS]; +#ifdef CONFIG_SMP + char *refptr; +#else + local_t ref; +#endif #endif }; #ifndef MODULE_ARCH_INIT @@ -395,13 +393,22 @@ void __symbol_put(const char *symbol); #define symbol_put(x) __symbol_put(MODULE_SYMBOL_PREFIX #x) void symbol_put_addr(void *addr); +static inline local_t *__module_ref_addr(struct module *mod, int cpu) +{ +#ifdef CONFIG_SMP + return (local_t *) (mod->refptr + per_cpu_offset(cpu)); +#else + return &mod->ref; +#endif +} + /* Sometimes we know we already have a refcount, and it's easier not to handle the error case (which only happens with rmmod --wait). */ static inline void __module_get(struct module *module) { if (module) { BUG_ON(module_refcount(module) == 0); - local_inc(&module->ref[get_cpu()].count); + local_inc(__module_ref_addr(module, get_cpu())); put_cpu(); } } @@ -413,7 +420,7 @@ static inline int try_module_get(struct module *module) if (module) { unsigned int cpu = get_cpu(); if (likely(module_is_live(module))) - local_inc(&module->ref[cpu].count); + local_inc(__module_ref_addr(module, cpu)); else ret = 0; put_cpu(); diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h index e0a9b20..ce38f1c 100644 --- a/include/linux/msdos_fs.h +++ b/include/linux/msdos_fs.h @@ -1,6 +1,7 @@ #ifndef _LINUX_MSDOS_FS_H #define _LINUX_MSDOS_FS_H +#include <linux/types.h> #include <linux/magic.h> #include <asm/byteorder.h> diff --git a/include/linux/neighbour.h b/include/linux/neighbour.h index bd3bbf6..8730d5d 100644 --- a/include/linux/neighbour.h +++ b/include/linux/neighbour.h @@ -1,6 +1,7 @@ #ifndef __LINUX_NEIGHBOUR_H #define __LINUX_NEIGHBOUR_H +#include <linux/types.h> #include <linux/netlink.h> struct ndmsg diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h index f3fd83e..8f53452 100644 --- a/include/linux/netfilter/xt_conntrack.h +++ b/include/linux/netfilter/xt_conntrack.h @@ -5,6 +5,7 @@ #ifndef _XT_CONNTRACK_H #define _XT_CONNTRACK_H +#include <linux/types.h> #include <linux/netfilter/nf_conntrack_tuple_common.h> #define XT_CONNTRACK_STATE_BIT(ctinfo) (1 << ((ctinfo)%IP_CT_IS_REPLY+1)) diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h index 15a9f3b..91a1c24 100644 --- a/include/linux/nfs_idmap.h +++ b/include/linux/nfs_idmap.h @@ -37,6 +37,8 @@ #ifndef NFS_IDMAP_H #define NFS_IDMAP_H +#include <linux/types.h> + /* XXX from bits/utmp.h */ #define IDMAP_NAMESZ 128 diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h index 5431512..bcd0201 100644 --- a/include/linux/nfsd/export.h +++ b/include/linux/nfsd/export.h @@ -10,9 +10,8 @@ #ifndef NFSD_EXPORT_H #define NFSD_EXPORT_H -#include <asm/types.h> -#ifdef __KERNEL__ # include <linux/types.h> +#ifdef __KERNEL__ # include <linux/in.h> #endif diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h index b2e0938..fa317f6 100644 --- a/include/linux/nfsd/nfsfh.h +++ b/include/linux/nfsd/nfsfh.h @@ -14,9 +14,8 @@ #ifndef _LINUX_NFSD_FH_H #define _LINUX_NFSD_FH_H -#include <asm/types.h> -#ifdef __KERNEL__ # include <linux/types.h> +#ifdef __KERNEL__ # include <linux/string.h> # include <linux/fs.h> #endif diff --git a/include/linux/nfsd/syscall.h b/include/linux/nfsd/syscall.h index 4e43976..7a3b565 100644 --- a/include/linux/nfsd/syscall.h +++ b/include/linux/nfsd/syscall.h @@ -9,9 +9,8 @@ #ifndef NFSD_SYSCALL_H #define NFSD_SYSCALL_H -#include <asm/types.h> -#ifdef __KERNEL__ # include <linux/types.h> +#ifdef __KERNEL__ # include <linux/in.h> #endif #include <linux/posix_types.h> diff --git a/include/linux/nubus.h b/include/linux/nubus.h index c435507..7382af3 100644 --- a/include/linux/nubus.h +++ b/include/linux/nubus.h @@ -12,6 +12,7 @@ #ifndef LINUX_NUBUS_H #define LINUX_NUBUS_H +#include <linux/types.h> #ifdef __KERNEL__ #include <asm/nubus.h> #endif diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index febc10e..52a9fe0 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2425,6 +2425,7 @@ #define PCI_DEVICE_ID_INTEL_ICH7_0 0x27b8 #define PCI_DEVICE_ID_INTEL_ICH7_1 0x27b9 #define PCI_DEVICE_ID_INTEL_ICH7_30 0x27b0 +#define PCI_DEVICE_ID_INTEL_TGP_LPC 0x27bc #define PCI_DEVICE_ID_INTEL_ICH7_31 0x27bd #define PCI_DEVICE_ID_INTEL_ICH7_17 0x27da #define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd diff --git a/include/linux/phonet.h b/include/linux/phonet.h index 4157faa..ee5e3c9 100644 --- a/include/linux/phonet.h +++ b/include/linux/phonet.h @@ -23,6 +23,8 @@ #ifndef LINUX_PHONET_H #define LINUX_PHONET_H +#include <linux/types.h> + /* Automatic protocol selection */ #define PN_PROTO_TRANSPORT 0 /* Phonet datagram socket */ diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h index e6aa848..3c842ed 100644 --- a/include/linux/pkt_cls.h +++ b/include/linux/pkt_cls.h @@ -1,6 +1,7 @@ #ifndef __LINUX_PKT_CLS_H #define __LINUX_PKT_CLS_H +#include <linux/types.h> #include <linux/pkt_sched.h> /* I think i could have done better macros ; for now this is stolen from diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h index e3f133a..b2648e8 100644 --- a/include/linux/pkt_sched.h +++ b/include/linux/pkt_sched.h @@ -1,6 +1,8 @@ #ifndef __LINUX_PKT_SCHED_H #define __LINUX_PKT_SCHED_H +#include <linux/types.h> + /* Logical priority bands not depending on specific packet scheduler. Every scheduler will map them to real traffic classes, if it has no more precise mechanism to classify packets. diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h index 6e8adc7..1c866bd 100644 --- a/include/linux/ppp_defs.h +++ b/include/linux/ppp_defs.h @@ -25,6 +25,8 @@ * OR MODIFICATIONS. */ +#include <linux/types.h> + /* * ==FILEVERSION 20000114== * diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h index 9491026..6ba830f 100644 --- a/include/linux/raid/md_p.h +++ b/include/linux/raid/md_p.h @@ -15,6 +15,8 @@ #ifndef _MD_P_H #define _MD_P_H +#include <linux/types.h> + /* * RAID superblock. * diff --git a/include/linux/random.h b/include/linux/random.h index 407ea36..25d02fe 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -7,6 +7,7 @@ #ifndef _LINUX_RANDOM_H #define _LINUX_RANDOM_H +#include <linux/types.h> #include <linux/ioctl.h> #include <linux/irqnr.h> diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index e88f705..1e5f673 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -1,6 +1,7 @@ #ifndef __LINUX_RTNETLINK_H #define __LINUX_RTNETLINK_H +#include <linux/types.h> #include <linux/netlink.h> #include <linux/if_link.h> #include <linux/if_addr.h> diff --git a/include/linux/sched.h b/include/linux/sched.h index 681394f..2225c20 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -630,7 +630,6 @@ struct user_struct { atomic_t inotify_devs; /* How many inotify devs does this user have opened? */ #endif #ifdef CONFIG_EPOLL - atomic_t epoll_devs; /* The number of epoll descriptors currently open */ atomic_t epoll_watches; /* The number of file descriptors currently watched */ #endif #ifdef CONFIG_POSIX_MQUEUE diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h index bef0c46..b363b91 100644 --- a/include/linux/signalfd.h +++ b/include/linux/signalfd.h @@ -8,6 +8,7 @@ #ifndef _LINUX_SIGNALFD_H #define _LINUX_SIGNALFD_H +#include <linux/types.h> /* For O_CLOEXEC and O_NONBLOCK */ #include <linux/fcntl.h> diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h index 39c3a5e..6ca6a7b 100644 --- a/include/linux/slab_def.h +++ b/include/linux/slab_def.h @@ -43,10 +43,7 @@ static inline void *kmalloc(size_t size, gfp_t flags) i++; #include <linux/kmalloc_sizes.h> #undef CACHE - { - extern void __you_cannot_kmalloc_that_much(void); - __you_cannot_kmalloc_that_much(); - } + return NULL; found: #ifdef CONFIG_ZONE_DMA if (flags & GFP_DMA) @@ -77,10 +74,7 @@ static inline void *kmalloc_node(size_t size, gfp_t flags, int node) i++; #include <linux/kmalloc_sizes.h> #undef CACHE - { - extern void __you_cannot_kmalloc_that_much(void); - __you_cannot_kmalloc_that_much(); - } + return NULL; found: #ifdef CONFIG_ZONE_DMA if (flags & GFP_DMA) diff --git a/include/linux/sound.h b/include/linux/sound.h index 9e2a94f..44dcf05 100644 --- a/include/linux/sound.h +++ b/include/linux/sound.h @@ -25,6 +25,7 @@ #define SND_DEV_AMIDI 13 /* Like /dev/midi (obsolete) */ #define SND_DEV_ADMMIDI 14 /* Like /dev/dmmidi (onsolete) */ +#ifdef __KERNEL__ /* * Sound core interface functions */ @@ -40,3 +41,4 @@ extern void unregister_sound_special(int unit); extern void unregister_sound_mixer(int unit); extern void unregister_sound_midi(int unit); extern void unregister_sound_dsp(int unit); +#endif /* __KERNEL__ */ diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h index c93ef9d..95251cc 100644 --- a/include/linux/spi/spidev.h +++ b/include/linux/spi/spidev.h @@ -22,6 +22,7 @@ #ifndef SPIDEV_H #define SPIDEV_H +#include <linux/types.h> /* User space versions of kernel symbols for SPI clocking modes, * matching <linux/spi/spi.h> diff --git a/include/linux/synclink.h b/include/linux/synclink.h index c844a22..99b8bdb 100644 --- a/include/linux/synclink.h +++ b/include/linux/synclink.h @@ -13,6 +13,8 @@ #define _SYNCLINK_H_ #define SYNCLINK_H_VERSION 3.6 +#include <linux/types.h> + #define BIT0 0x0001 #define BIT1 0x0002 #define BIT2 0x0004 diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 16875f8..0eda02f 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -108,9 +108,14 @@ struct old_linux_dirent; asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \ "\t.globl ." #alias "\n\t.set ." #alias ", ." #name) #else +#ifdef CONFIG_ALPHA +#define SYSCALL_ALIAS(alias, name) \ + asm ( #alias " = " #name "\n\t.globl " #alias) +#else #define SYSCALL_ALIAS(alias, name) \ asm ("\t.globl " #alias "\n\t.set " #alias ", " #name) #endif +#endif #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h index 18269e9..341dddb 100644 --- a/include/linux/taskstats.h +++ b/include/linux/taskstats.h @@ -16,6 +16,8 @@ #ifndef _LINUX_TASKSTATS_H #define _LINUX_TASKSTATS_H +#include <linux/types.h> + /* Format for per-task data returned to userland when * - a task exits * - listener requests stats for a task diff --git a/include/linux/tc_act/tc_gact.h b/include/linux/tc_act/tc_gact.h index 23a03eb6..e895c0a 100644 --- a/include/linux/tc_act/tc_gact.h +++ b/include/linux/tc_act/tc_gact.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_GACT_H #define __LINUX_TC_GACT_H +#include <linux/types.h> #include <linux/pkt_cls.h> #define TCA_ACT_GACT 5 diff --git a/include/linux/tc_act/tc_mirred.h b/include/linux/tc_act/tc_mirred.h index 71d6340..0a99ab6 100644 --- a/include/linux/tc_act/tc_mirred.h +++ b/include/linux/tc_act/tc_mirred.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_MIR_H #define __LINUX_TC_MIR_H +#include <linux/types.h> #include <linux/pkt_cls.h> #define TCA_ACT_MIRRED 8 diff --git a/include/linux/tc_act/tc_pedit.h b/include/linux/tc_act/tc_pedit.h index 83e56e3..54ce906 100644 --- a/include/linux/tc_act/tc_pedit.h +++ b/include/linux/tc_act/tc_pedit.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_PED_H #define __LINUX_TC_PED_H +#include <linux/types.h> #include <linux/pkt_cls.h> #define TCA_ACT_PEDIT 7 diff --git a/include/linux/tc_ematch/tc_em_cmp.h b/include/linux/tc_ematch/tc_em_cmp.h index c7f4d43..38e7f7b 100644 --- a/include/linux/tc_ematch/tc_em_cmp.h +++ b/include/linux/tc_ematch/tc_em_cmp.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_EM_CMP_H #define __LINUX_TC_EM_CMP_H +#include <linux/types.h> #include <linux/pkt_cls.h> struct tcf_em_cmp diff --git a/include/linux/tc_ematch/tc_em_meta.h b/include/linux/tc_ematch/tc_em_meta.h index c50d2ba..dcfb733 100644 --- a/include/linux/tc_ematch/tc_em_meta.h +++ b/include/linux/tc_ematch/tc_em_meta.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_EM_META_H #define __LINUX_TC_EM_META_H +#include <linux/types.h> #include <linux/pkt_cls.h> enum diff --git a/include/linux/tc_ematch/tc_em_nbyte.h b/include/linux/tc_ematch/tc_em_nbyte.h index f19d1f5..9ed8c2e 100644 --- a/include/linux/tc_ematch/tc_em_nbyte.h +++ b/include/linux/tc_ematch/tc_em_nbyte.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_EM_NBYTE_H #define __LINUX_TC_EM_NBYTE_H +#include <linux/types.h> #include <linux/pkt_cls.h> struct tcf_em_nbyte diff --git a/include/linux/tc_ematch/tc_em_text.h b/include/linux/tc_ematch/tc_em_text.h index 7cd43e9..d12a73a 100644 --- a/include/linux/tc_ematch/tc_em_text.h +++ b/include/linux/tc_ematch/tc_em_text.h @@ -1,6 +1,7 @@ #ifndef __LINUX_TC_EM_TEXT_H #define __LINUX_TC_EM_TEXT_H +#include <linux/types.h> #include <linux/pkt_cls.h> #define TC_EM_TEXT_ALGOSIZ 16 diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 18a7293..3c86ed2 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -9,6 +9,8 @@ #ifndef __LINUX_USB_CDC_H #define __LINUX_USB_CDC_H +#include <linux/types.h> + #define USB_CDC_SUBCLASS_ACM 0x02 #define USB_CDC_SUBCLASS_ETHERNET 0x06 #define USB_CDC_SUBCLASS_WHCM 0x08 diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h index ea45f26..612102e 100644 --- a/include/linux/usb/gadgetfs.h +++ b/include/linux/usb/gadgetfs.h @@ -18,7 +18,7 @@ #ifndef __LINUX_USB_GADGETFS_H #define __LINUX_USB_GADGETFS_H -#include <asm/types.h> +#include <linux/types.h> #include <asm/ioctl.h> #include <linux/usb/ch9.h> diff --git a/include/linux/video_decoder.h b/include/linux/video_decoder.h index 121e26d..e26c0c8 100644 --- a/include/linux/video_decoder.h +++ b/include/linux/video_decoder.h @@ -1,6 +1,8 @@ #ifndef _LINUX_VIDEO_DECODER_H #define _LINUX_VIDEO_DECODER_H +#include <linux/types.h> + #define HAVE_VIDEO_DECODER 1 struct video_decoder_capability { /* this name is too long */ diff --git a/include/linux/video_encoder.h b/include/linux/video_encoder.h index 4b0e690..b7b6423 100644 --- a/include/linux/video_encoder.h +++ b/include/linux/video_encoder.h @@ -1,6 +1,8 @@ #ifndef _LINUX_VIDEO_ENCODER_H #define _LINUX_VIDEO_ENCODER_H +#include <linux/types.h> + struct video_encoder_capability { /* this name is too long */ __u32 flags; #define VIDEO_ENCODER_PAL 1 /* can encode PAL signal */ diff --git a/include/linux/videodev.h b/include/linux/videodev.h index 15a653d..837f392 100644 --- a/include/linux/videodev.h +++ b/include/linux/videodev.h @@ -12,6 +12,7 @@ #ifndef __LINUX_VIDEODEV_H #define __LINUX_VIDEODEV_H +#include <linux/types.h> #include <linux/ioctl.h> #include <linux/videodev2.h> diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index c1aef85..94c56d2 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -2,6 +2,7 @@ #define _LINUX_VIRTIO_BLK_H /* This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. */ +#include <linux/types.h> #include <linux/virtio_config.h> /* The ID for virtio_block */ diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h index 7615ffc..dc16111 100644 --- a/include/linux/virtio_console.h +++ b/include/linux/virtio_console.h @@ -1,5 +1,6 @@ #ifndef _LINUX_VIRTIO_CONSOLE_H #define _LINUX_VIRTIO_CONSOLE_H +#include <linux/types.h> #include <linux/virtio_config.h> /* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so * anyone can use the definitions to implement compatible drivers/servers. */ diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 5cdd0aa..3efa86c 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -2,6 +2,7 @@ #define _LINUX_VIRTIO_NET_H /* This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. */ +#include <linux/types.h> #include <linux/virtio_config.h> /* The ID for virtio_net */ diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h index 9bf4ccc..55e41af 100644 --- a/include/media/v4l2-device.h +++ b/include/media/v4l2-device.h @@ -94,16 +94,16 @@ void v4l2_device_unregister_subdev(struct v4l2_subdev *sd); /* Call the specified callback for all subdevs matching grp_id (if 0, then match them all). Ignore any errors. Note that you cannot add or delete a subdev while walking the subdevs list. */ -#define v4l2_device_call_all(dev, grp_id, o, f, args...) \ +#define v4l2_device_call_all(dev, grpid, o, f, args...) \ __v4l2_device_call_subdevs(dev, \ - !(grp_id) || sd->grp_id == (grp_id), o, f , ##args) + !(grpid) || sd->grp_id == (grpid), o, f , ##args) /* Call the specified callback for all subdevs matching grp_id (if 0, then match them all). If the callback returns an error other than 0 or -ENOIOCTLCMD, then return with that error code. Note that you cannot add or delete a subdev while walking the subdevs list. */ -#define v4l2_device_call_until_err(dev, grp_id, o, f, args...) \ +#define v4l2_device_call_until_err(dev, grpid, o, f, args...) \ __v4l2_device_call_subdevs_until_err(dev, \ - !(grp_id) || sd->grp_id == (grp_id), o, f , ##args) + !(grpid) || sd->grp_id == (grpid), o, f , ##args) #endif diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h index 90edd22..dda47f0 100644 --- a/include/media/videobuf-dma-sg.h +++ b/include/media/videobuf-dma-sg.h @@ -49,7 +49,7 @@ struct scatterlist* videobuf_pages_to_sg(struct page **pages, int nr_pages, * does memory allocation too using vmalloc_32(). * * videobuf_dma_*() - * see Documentation/DMA-mapping.txt, these functions to + * see Documentation/PCI/PCI-DMA-mapping.txt, these functions to * basically the same. The map function does also build a * scatterlist for the buffer (and unmap frees it ...) * diff --git a/include/mtd/inftl-user.h b/include/mtd/inftl-user.h index e17eda3..d409d48 100644 --- a/include/mtd/inftl-user.h +++ b/include/mtd/inftl-user.h @@ -6,6 +6,8 @@ #ifndef __MTD_INFTL_USER_H__ #define __MTD_INFTL_USER_H__ +#include <linux/types.h> + #define OSAK_VERSION 0x5120 #define PERCENTUSED 98 diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index 2dc2eb2..296efae 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -40,37 +40,37 @@ * UBI volume creation * ~~~~~~~~~~~~~~~~~~~ * - * UBI volumes are created via the %UBI_IOCMKVOL IOCTL command of UBI character + * UBI volumes are created via the %UBI_IOCMKVOL ioctl command of UBI character * device. A &struct ubi_mkvol_req object has to be properly filled and a - * pointer to it has to be passed to the IOCTL. + * pointer to it has to be passed to the ioctl. * * UBI volume deletion * ~~~~~~~~~~~~~~~~~~~ * - * To delete a volume, the %UBI_IOCRMVOL IOCTL command of the UBI character + * To delete a volume, the %UBI_IOCRMVOL ioctl command of the UBI character * device should be used. A pointer to the 32-bit volume ID hast to be passed - * to the IOCTL. + * to the ioctl. * * UBI volume re-size * ~~~~~~~~~~~~~~~~~~ * - * To re-size a volume, the %UBI_IOCRSVOL IOCTL command of the UBI character + * To re-size a volume, the %UBI_IOCRSVOL ioctl command of the UBI character * device should be used. A &struct ubi_rsvol_req object has to be properly - * filled and a pointer to it has to be passed to the IOCTL. + * filled and a pointer to it has to be passed to the ioctl. * * UBI volumes re-name * ~~~~~~~~~~~~~~~~~~~ * * To re-name several volumes atomically at one go, the %UBI_IOCRNVOL command * of the UBI character device should be used. A &struct ubi_rnvol_req object - * has to be properly filled and a pointer to it has to be passed to the IOCTL. + * has to be properly filled and a pointer to it has to be passed to the ioctl. * * UBI volume update * ~~~~~~~~~~~~~~~~~ * - * Volume update should be done via the %UBI_IOCVOLUP IOCTL command of the + * Volume update should be done via the %UBI_IOCVOLUP ioctl command of the * corresponding UBI volume character device. A pointer to a 64-bit update - * size should be passed to the IOCTL. After this, UBI expects user to write + * size should be passed to the ioctl. After this, UBI expects user to write * this number of bytes to the volume character device. The update is finished * when the claimed number of bytes is passed. So, the volume update sequence * is something like: @@ -80,14 +80,58 @@ * write(fd, buf, image_size); * close(fd); * - * Atomic eraseblock change + * Logical eraseblock erase * ~~~~~~~~~~~~~~~~~~~~~~~~ * - * Atomic eraseblock change operation is done via the %UBI_IOCEBCH IOCTL - * command of the corresponding UBI volume character device. A pointer to - * &struct ubi_leb_change_req has to be passed to the IOCTL. Then the user is - * expected to write the requested amount of bytes. This is similar to the - * "volume update" IOCTL. + * To erase a logical eraseblock, the %UBI_IOCEBER ioctl command of the + * corresponding UBI volume character device should be used. This command + * unmaps the requested logical eraseblock, makes sure the corresponding + * physical eraseblock is successfully erased, and returns. + * + * Atomic logical eraseblock change + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * Atomic logical eraseblock change operation is called using the %UBI_IOCEBCH + * ioctl command of the corresponding UBI volume character device. A pointer to + * a &struct ubi_leb_change_req object has to be passed to the ioctl. Then the + * user is expected to write the requested amount of bytes (similarly to what + * should be done in case of the "volume update" ioctl). + * + * Logical eraseblock map + * ~~~~~~~~~~~~~~~~~~~~~ + * + * To map a logical eraseblock to a physical eraseblock, the %UBI_IOCEBMAP + * ioctl command should be used. A pointer to a &struct ubi_map_req object is + * expected to be passed. The ioctl maps the requested logical eraseblock to + * a physical eraseblock and returns. Only non-mapped logical eraseblocks can + * be mapped. If the logical eraseblock specified in the request is already + * mapped to a physical eraseblock, the ioctl fails and returns error. + * + * Logical eraseblock unmap + * ~~~~~~~~~~~~~~~~~~~~~~~~ + * + * To unmap a logical eraseblock to a physical eraseblock, the %UBI_IOCEBUNMAP + * ioctl command should be used. The ioctl unmaps the logical eraseblocks, + * schedules corresponding physical eraseblock for erasure, and returns. Unlike + * the "LEB erase" command, it does not wait for the physical eraseblock being + * erased. Note, the side effect of this is that if an unclean reboot happens + * after the unmap ioctl returns, you may find the LEB mapped again to the same + * physical eraseblock after the UBI is run again. + * + * Check if logical eraseblock is mapped + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * To check if a logical eraseblock is mapped to a physical eraseblock, the + * %UBI_IOCEBISMAP ioctl command should be used. It returns %0 if the LEB is + * not mapped, and %1 if it is mapped. + * + * Set an UBI volume property + * ~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * To set an UBI volume property the %UBI_IOCSETPROP ioctl command should be + * used. A pointer to a &struct ubi_set_prop_req object is expected to be + * passed. The object describes which property should be set, and to which value + * it should be set. */ /* @@ -101,7 +145,7 @@ /* Maximum volume name length */ #define UBI_MAX_VOLUME_NAME 127 -/* IOCTL commands of UBI character devices */ +/* ioctl commands of UBI character devices */ #define UBI_IOC_MAGIC 'o' @@ -114,7 +158,7 @@ /* Re-name volumes */ #define UBI_IOCRNVOL _IOW(UBI_IOC_MAGIC, 3, struct ubi_rnvol_req) -/* IOCTL commands of the UBI control character device */ +/* ioctl commands of the UBI control character device */ #define UBI_CTRL_IOC_MAGIC 'o' @@ -123,16 +167,24 @@ /* Detach an MTD device */ #define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, int32_t) -/* IOCTL commands of UBI volume character devices */ +/* ioctl commands of UBI volume character devices */ #define UBI_VOL_IOC_MAGIC 'O' /* Start UBI volume update */ #define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, int64_t) -/* An eraseblock erasure command, used for debugging, disabled by default */ +/* LEB erasure command, used for debugging, disabled by default */ #define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t) -/* An atomic eraseblock change command */ +/* Atomic LEB change command */ #define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t) +/* Map LEB command */ +#define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req) +/* Unmap LEB command */ +#define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, int32_t) +/* Check if LEB is mapped command */ +#define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, int32_t) +/* Set an UBI volume property */ +#define UBI_IOCSETPROP _IOW(UBI_VOL_IOC_MAGIC, 6, struct ubi_set_prop_req) /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127 @@ -168,6 +220,16 @@ enum { UBI_STATIC_VOLUME = 4, }; +/* + * UBI set property ioctl constants + * + * @UBI_PROP_DIRECT_WRITE: allow / disallow user to directly write and + * erase individual eraseblocks on dynamic volumes + */ +enum { + UBI_PROP_DIRECT_WRITE = 1, +}; + /** * struct ubi_attach_req - attach MTD device request. * @ubi_num: UBI device number to create @@ -305,8 +367,8 @@ struct ubi_rnvol_req { } __attribute__ ((packed)); /** - * struct ubi_leb_change_req - a data structure used in atomic logical - * eraseblock change requests. + * struct ubi_leb_change_req - a data structure used in atomic LEB change + * requests. * @lnum: logical eraseblock number to change * @bytes: how many bytes will be written to the logical eraseblock * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) @@ -319,4 +381,30 @@ struct ubi_leb_change_req { int8_t padding[7]; } __attribute__ ((packed)); +/** + * struct ubi_map_req - a data structure used in map LEB requests. + * @lnum: logical eraseblock number to unmap + * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) + * @padding: reserved for future, not used, has to be zeroed + */ +struct ubi_map_req { + int32_t lnum; + int8_t dtype; + int8_t padding[3]; +} __attribute__ ((packed)); + + +/** + * struct ubi_set_prop_req - a data structure used to set an ubi volume + * property. + * @property: property to set (%UBI_PROP_DIRECT_WRITE) + * @padding: reserved for future, not used, has to be zeroed + * @value: value to set + */ +struct ubi_set_prop_req { + uint8_t property; + uint8_t padding[7]; + uint64_t value; +} __attribute__ ((packed)); + #endif /* __UBI_USER_H__ */ diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h index f44bb5c..d0a0431 100644 --- a/include/net/inet_hashtables.h +++ b/include/net/inet_hashtables.h @@ -182,7 +182,7 @@ static inline int inet_ehash_locks_alloc(struct inet_hashinfo *hashinfo) size = 2048; if (nr_pcpus >= 32) size = 4096; - if (sizeof(rwlock_t) != 0) { + if (sizeof(spinlock_t) != 0) { #ifdef CONFIG_NUMA if (size * sizeof(spinlock_t) > PAGE_SIZE) hashinfo->ehash_locks = vmalloc(size * sizeof(spinlock_t)); diff --git a/include/sound/hdsp.h b/include/sound/hdsp.h index dec6b1d..d98a78d 100644 --- a/include/sound/hdsp.h +++ b/include/sound/hdsp.h @@ -19,6 +19,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/types.h> + #define HDSP_MATRIX_MIXER_SIZE 2048 enum HDSP_IO_Type { diff --git a/include/video/sisfb.h b/include/video/sisfb.h index e402eb5..fdd74f1 100644 --- a/include/video/sisfb.h +++ b/include/video/sisfb.h @@ -21,8 +21,8 @@ #ifndef _LINUX_SISFB_H_ #define _LINUX_SISFB_H_ +#include <linux/types.h> #include <asm/ioctl.h> -#include <asm/types.h> /**********************************************/ /* PUBLIC */ diff --git a/include/video/uvesafb.h b/include/video/uvesafb.h index 95bcef1..0993a22 100644 --- a/include/video/uvesafb.h +++ b/include/video/uvesafb.h @@ -1,6 +1,8 @@ #ifndef _UVESAFB_H #define _UVESAFB_H +#include <linux/types.h> + struct v86_regs { __u32 ebx; __u32 ecx; @@ -368,14 +368,14 @@ static int newseg(struct ipc_namespace *ns, struct ipc_params *params) file = hugetlb_file_setup(name, size); shp->mlock_user = current_user(); } else { - int acctflag = VM_ACCOUNT; + int acctflag = 0; /* * Do not allow no accounting for OVERCOMMIT_NEVER, even * if it's asked for. */ if ((shmflg & SHM_NORESERVE) && sysctl_overcommit_memory != OVERCOMMIT_NEVER) - acctflag = 0; + acctflag = VM_NORESERVE; file = shmem_file_setup(name, size, acctflag); } error = PTR_ERR(file); diff --git a/kernel/cgroup.c b/kernel/cgroup.c index c298310..5a54ff4 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1115,8 +1115,10 @@ static void cgroup_kill_sb(struct super_block *sb) { } write_unlock(&css_set_lock); - list_del(&root->root_list); - root_count--; + if (!list_empty(&root->root_list)) { + list_del(&root->root_list); + root_count--; + } mutex_unlock(&cgroup_mutex); @@ -2434,7 +2436,9 @@ static long cgroup_create(struct cgroup *parent, struct dentry *dentry, err_remove: + cgroup_lock_hierarchy(root); list_del(&cgrp->sibling); + cgroup_unlock_hierarchy(root); root->number_of_cgroups--; err_destroy: @@ -2507,7 +2511,7 @@ static int cgroup_clear_css_refs(struct cgroup *cgrp) for_each_subsys(cgrp->root, ss) { struct cgroup_subsys_state *css = cgrp->subsys[ss->subsys_id]; int refcnt; - do { + while (1) { /* We can only remove a CSS with a refcnt==1 */ refcnt = atomic_read(&css->refcnt); if (refcnt > 1) { @@ -2521,7 +2525,10 @@ static int cgroup_clear_css_refs(struct cgroup *cgrp) * css_tryget() to spin until we set the * CSS_REMOVED bits or abort */ - } while (atomic_cmpxchg(&css->refcnt, refcnt, 0) != refcnt); + if (atomic_cmpxchg(&css->refcnt, refcnt, 0) == refcnt) + break; + cpu_relax(); + } } done: for_each_subsys(cgrp->root, ss) { @@ -2991,20 +2998,21 @@ int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys, mutex_unlock(&cgroup_mutex); return 0; } - task_lock(tsk); - cg = tsk->cgroups; - parent = task_cgroup(tsk, subsys->subsys_id); /* Pin the hierarchy */ - if (!atomic_inc_not_zero(&parent->root->sb->s_active)) { + if (!atomic_inc_not_zero(&root->sb->s_active)) { /* We race with the final deactivate_super() */ mutex_unlock(&cgroup_mutex); return 0; } /* Keep the cgroup alive */ + task_lock(tsk); + parent = task_cgroup(tsk, subsys->subsys_id); + cg = tsk->cgroups; get_css_set(cg); task_unlock(tsk); + mutex_unlock(&cgroup_mutex); /* Now do the VFS work to create a cgroup */ @@ -3043,7 +3051,7 @@ int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys, mutex_unlock(&inode->i_mutex); put_css_set(cg); - deactivate_super(parent->root->sb); + deactivate_super(root->sb); /* The cgroup is still accessible in the VFS, but * we're not going to try to rmdir() it at this * point. */ @@ -3069,7 +3077,7 @@ int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys, mutex_lock(&cgroup_mutex); put_css_set(cg); mutex_unlock(&cgroup_mutex); - deactivate_super(parent->root->sb); + deactivate_super(root->sb); return ret; } diff --git a/kernel/cpuset.c b/kernel/cpuset.c index a856788..f76db9d 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -61,6 +61,14 @@ #include <linux/cgroup.h> /* + * Workqueue for cpuset related tasks. + * + * Using kevent workqueue may cause deadlock when memory_migrate + * is set. So we create a separate workqueue thread for cpuset. + */ +static struct workqueue_struct *cpuset_wq; + +/* * Tracks how many cpusets are currently defined in system. * When there is only one cpuset (the root cpuset) we can * short circuit some hooks. @@ -831,7 +839,7 @@ static DECLARE_WORK(rebuild_sched_domains_work, do_rebuild_sched_domains); */ static void async_rebuild_sched_domains(void) { - schedule_work(&rebuild_sched_domains_work); + queue_work(cpuset_wq, &rebuild_sched_domains_work); } /* @@ -2111,6 +2119,9 @@ void __init cpuset_init_smp(void) hotcpu_notifier(cpuset_track_online_cpus, 0); hotplug_memory_notifier(cpuset_track_online_nodes, 10); + + cpuset_wq = create_singlethread_workqueue("cpuset"); + BUG_ON(!cpuset_wq); } /** diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index f33afb0..f394d2a 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -501,6 +501,13 @@ static void hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base) continue; timer = rb_entry(base->first, struct hrtimer, node); expires = ktime_sub(hrtimer_get_expires(timer), base->offset); + /* + * clock_was_set() has changed base->offset so the + * result might be negative. Fix it up to prevent a + * false positive in clockevents_program_event() + */ + if (expires.tv64 < 0) + expires.tv64 = 0; if (expires.tv64 < cpu_base->expires_next.tv64) cpu_base->expires_next = expires; } @@ -1158,6 +1165,29 @@ static void __run_hrtimer(struct hrtimer *timer) #ifdef CONFIG_HIGH_RES_TIMERS +static int force_clock_reprogram; + +/* + * After 5 iteration's attempts, we consider that hrtimer_interrupt() + * is hanging, which could happen with something that slows the interrupt + * such as the tracing. Then we force the clock reprogramming for each future + * hrtimer interrupts to avoid infinite loops and use the min_delta_ns + * threshold that we will overwrite. + * The next tick event will be scheduled to 3 times we currently spend on + * hrtimer_interrupt(). This gives a good compromise, the cpus will spend + * 1/4 of their time to process the hrtimer interrupts. This is enough to + * let it running without serious starvation. + */ + +static inline void +hrtimer_interrupt_hanging(struct clock_event_device *dev, + ktime_t try_time) +{ + force_clock_reprogram = 1; + dev->min_delta_ns = (unsigned long)try_time.tv64 * 3; + printk(KERN_WARNING "hrtimer: interrupt too slow, " + "forcing clock min delta to %lu ns\n", dev->min_delta_ns); +} /* * High resolution timer interrupt * Called with interrupts disabled @@ -1167,6 +1197,7 @@ void hrtimer_interrupt(struct clock_event_device *dev) struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases); struct hrtimer_clock_base *base; ktime_t expires_next, now; + int nr_retries = 0; int i; BUG_ON(!cpu_base->hres_active); @@ -1174,6 +1205,10 @@ void hrtimer_interrupt(struct clock_event_device *dev) dev->next_event.tv64 = KTIME_MAX; retry: + /* 5 retries is enough to notice a hang */ + if (!(++nr_retries % 5)) + hrtimer_interrupt_hanging(dev, ktime_sub(ktime_get(), now)); + now = ktime_get(); expires_next.tv64 = KTIME_MAX; @@ -1226,7 +1261,7 @@ void hrtimer_interrupt(struct clock_event_device *dev) /* Reprogramming necessary ? */ if (expires_next.tv64 != KTIME_MAX) { - if (tick_program_event(expires_next, 0)) + if (tick_program_event(expires_next, force_clock_reprogram)) goto retry; } } @@ -1580,6 +1615,10 @@ static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self, break; #ifdef CONFIG_HOTPLUG_CPU + case CPU_DYING: + case CPU_DYING_FROZEN: + clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DYING, &scpu); + break; case CPU_DEAD: case CPU_DEAD_FROZEN: { diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c index c248eba..122fef4 100644 --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c @@ -386,6 +386,7 @@ handle_level_irq(unsigned int irq, struct irq_desc *desc) out_unlock: spin_unlock(&desc->lock); } +EXPORT_SYMBOL_GPL(handle_level_irq); /** * handle_fasteoi_irq - irq handler for transparent controllers @@ -596,6 +597,7 @@ __set_irq_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained, } spin_unlock_irqrestore(&desc->lock, flags); } +EXPORT_SYMBOL_GPL(__set_irq_handler); void set_irq_chip_and_handler(unsigned int irq, struct irq_chip *chip, diff --git a/kernel/irq/numa_migrate.c b/kernel/irq/numa_migrate.c index 666260e..7f9b804 100644 --- a/kernel/irq/numa_migrate.c +++ b/kernel/irq/numa_migrate.c @@ -78,7 +78,7 @@ static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc, desc = irq_desc_ptrs[irq]; if (desc && old_desc != desc) - goto out_unlock; + goto out_unlock; node = cpu_to_node(cpu); desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node); @@ -97,10 +97,15 @@ static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc, } irq_desc_ptrs[irq] = desc; + spin_unlock_irqrestore(&sparse_irq_lock, flags); /* free the old one */ free_one_irq_desc(old_desc, desc); + spin_unlock(&old_desc->lock); kfree(old_desc); + spin_lock(&desc->lock); + + return desc; out_unlock: spin_unlock_irqrestore(&sparse_irq_lock, flags); diff --git a/kernel/module.c b/kernel/module.c index e8b51d4..ba22484 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -573,13 +573,13 @@ static char last_unloaded_module[MODULE_NAME_LEN+1]; /* Init the unload section of the module. */ static void module_unload_init(struct module *mod) { - unsigned int i; + int cpu; INIT_LIST_HEAD(&mod->modules_which_use_me); - for (i = 0; i < NR_CPUS; i++) - local_set(&mod->ref[i].count, 0); + for_each_possible_cpu(cpu) + local_set(__module_ref_addr(mod, cpu), 0); /* Hold reference count during initialization. */ - local_set(&mod->ref[raw_smp_processor_id()].count, 1); + local_set(__module_ref_addr(mod, raw_smp_processor_id()), 1); /* Backwards compatibility macros put refcount during init. */ mod->waiter = current; } @@ -717,10 +717,11 @@ static int try_stop_module(struct module *mod, int flags, int *forced) unsigned int module_refcount(struct module *mod) { - unsigned int i, total = 0; + unsigned int total = 0; + int cpu; - for (i = 0; i < NR_CPUS; i++) - total += local_read(&mod->ref[i].count); + for_each_possible_cpu(cpu) + total += local_read(__module_ref_addr(mod, cpu)); return total; } EXPORT_SYMBOL(module_refcount); @@ -894,7 +895,7 @@ void module_put(struct module *module) { if (module) { unsigned int cpu = get_cpu(); - local_dec(&module->ref[cpu].count); + local_dec(__module_ref_addr(module, cpu)); /* Maybe they're waiting for us to drop reference? */ if (unlikely(!module_is_live(module))) wake_up_process(module->waiter); @@ -1464,7 +1465,10 @@ static void free_module(struct module *mod) kfree(mod->args); if (mod->percpu) percpu_modfree(mod->percpu); - +#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP) + if (mod->refptr) + percpu_modfree(mod->refptr); +#endif /* Free lock-classes: */ lockdep_free_key_range(mod->module_core, mod->core_size); @@ -2011,6 +2015,14 @@ static noinline struct module *load_module(void __user *umod, if (err < 0) goto free_mod; +#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP) + mod->refptr = percpu_modalloc(sizeof(local_t), __alignof__(local_t), + mod->name); + if (!mod->refptr) { + err = -ENOMEM; + goto free_mod; + } +#endif if (pcpuindex) { /* We have a special allocation for this section. */ percpu = percpu_modalloc(sechdrs[pcpuindex].sh_size, @@ -2018,7 +2030,7 @@ static noinline struct module *load_module(void __user *umod, mod->name); if (!percpu) { err = -ENOMEM; - goto free_mod; + goto free_percpu; } sechdrs[pcpuindex].sh_flags &= ~(unsigned long)SHF_ALLOC; mod->percpu = percpu; @@ -2282,6 +2294,9 @@ static noinline struct module *load_module(void __user *umod, free_percpu: if (percpu) percpu_modfree(percpu); +#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP) + percpu_modfree(mod->refptr); +#endif free_mod: kfree(args); free_hdr: diff --git a/kernel/sched.c b/kernel/sched.c index c71d7d5..4007561 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2266,6 +2266,16 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync) if (!sched_feat(SYNC_WAKEUPS)) sync = 0; + if (!sync) { + if (current->se.avg_overlap < sysctl_sched_migration_cost && + p->se.avg_overlap < sysctl_sched_migration_cost) + sync = 1; + } else { + if (current->se.avg_overlap >= sysctl_sched_migration_cost || + p->se.avg_overlap >= sysctl_sched_migration_cost) + sync = 0; + } + #ifdef CONFIG_SMP if (sched_feat(LB_WAKEUP_UPDATE)) { struct sched_domain *sd; diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 5cc1c16..a7e50ba 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -719,7 +719,7 @@ enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int wakeup) __enqueue_entity(cfs_rq, se); } -static void clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se) +static void __clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se) { if (cfs_rq->last == se) cfs_rq->last = NULL; @@ -728,6 +728,12 @@ static void clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se) cfs_rq->next = NULL; } +static void clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se) +{ + for_each_sched_entity(se) + __clear_buddies(cfs_rq_of(se), se); +} + static void dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep) { @@ -768,8 +774,14 @@ check_preempt_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr) ideal_runtime = sched_slice(cfs_rq, curr); delta_exec = curr->sum_exec_runtime - curr->prev_sum_exec_runtime; - if (delta_exec > ideal_runtime) + if (delta_exec > ideal_runtime) { resched_task(rq_of(cfs_rq)->curr); + /* + * The current task ran long enough, ensure it doesn't get + * re-elected due to buddy favours. + */ + clear_buddies(cfs_rq, curr); + } } static void @@ -1179,20 +1191,15 @@ wake_affine(struct sched_domain *this_sd, struct rq *this_rq, int idx, unsigned long load, unsigned long this_load, unsigned int imbalance) { - struct task_struct *curr = this_rq->curr; - struct task_group *tg; unsigned long tl = this_load; unsigned long tl_per_task; + struct task_group *tg; unsigned long weight; int balanced; if (!(this_sd->flags & SD_WAKE_AFFINE) || !sched_feat(AFFINE_WAKEUPS)) return 0; - if (sync && (curr->se.avg_overlap > sysctl_sched_migration_cost || - p->se.avg_overlap > sysctl_sched_migration_cost)) - sync = 0; - /* * If sync wakeup then subtract the (maximum possible) * effect of the currently running task from the load @@ -1419,9 +1426,7 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int sync) if (!sched_feat(WAKEUP_PREEMPT)) return; - if (sched_feat(WAKEUP_OVERLAP) && (sync || - (se->avg_overlap < sysctl_sched_migration_cost && - pse->avg_overlap < sysctl_sched_migration_cost))) { + if (sched_feat(WAKEUP_OVERLAP) && sync) { resched_task(curr); return; } @@ -1452,6 +1457,11 @@ static struct task_struct *pick_next_task_fair(struct rq *rq) do { se = pick_next_entity(cfs_rq); + /* + * If se was a buddy, clear it so that it will have to earn + * the favour again. + */ + __clear_buddies(cfs_rq, se); set_next_entity(cfs_rq, se); cfs_rq = group_cfs_rq(se); } while (cfs_rq); diff --git a/kernel/signal.c b/kernel/signal.c index e737597..b6b3676 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -909,7 +909,9 @@ static void print_fatal_signal(struct pt_regs *regs, int signr) } #endif printk("\n"); + preempt_disable(); show_regs(regs); + preempt_enable(); } static int __init setup_print_fatal_signals(char *str) diff --git a/kernel/smp.c b/kernel/smp.c index 5cfa0e5..bbedbb7 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -18,6 +18,7 @@ __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_function_lock); enum { CSD_FLAG_WAIT = 0x01, CSD_FLAG_ALLOC = 0x02, + CSD_FLAG_LOCK = 0x04, }; struct call_function_data { @@ -186,6 +187,9 @@ void generic_smp_call_function_single_interrupt(void) if (data_flags & CSD_FLAG_WAIT) { smp_wmb(); data->flags &= ~CSD_FLAG_WAIT; + } else if (data_flags & CSD_FLAG_LOCK) { + smp_wmb(); + data->flags &= ~CSD_FLAG_LOCK; } else if (data_flags & CSD_FLAG_ALLOC) kfree(data); } @@ -196,6 +200,8 @@ void generic_smp_call_function_single_interrupt(void) } } +static DEFINE_PER_CPU(struct call_single_data, csd_data); + /* * smp_call_function_single - Run a function on a specific CPU * @func: The function to run. This must be fast and non-blocking. @@ -224,14 +230,38 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info, func(info); local_irq_restore(flags); } else if ((unsigned)cpu < nr_cpu_ids && cpu_online(cpu)) { - struct call_single_data *data = NULL; + struct call_single_data *data; if (!wait) { + /* + * We are calling a function on a single CPU + * and we are not going to wait for it to finish. + * We first try to allocate the data, but if we + * fail, we fall back to use a per cpu data to pass + * the information to that CPU. Since all callers + * of this code will use the same data, we must + * synchronize the callers to prevent a new caller + * from corrupting the data before the callee + * can access it. + * + * The CSD_FLAG_LOCK is used to let us know when + * the IPI handler is done with the data. + * The first caller will set it, and the callee + * will clear it. The next caller must wait for + * it to clear before we set it again. This + * will make sure the callee is done with the + * data before a new caller will use it. + */ data = kmalloc(sizeof(*data), GFP_ATOMIC); if (data) data->flags = CSD_FLAG_ALLOC; - } - if (!data) { + else { + data = &per_cpu(csd_data, me); + while (data->flags & CSD_FLAG_LOCK) + cpu_relax(); + data->flags = CSD_FLAG_LOCK; + } + } else { data = &d; data->flags = CSD_FLAG_WAIT; } diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 63e05d4..21a5ca8 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -274,6 +274,21 @@ out_bc: } /* + * Transfer the do_timer job away from a dying cpu. + * + * Called with interrupts disabled. + */ +static void tick_handover_do_timer(int *cpup) +{ + if (*cpup == tick_do_timer_cpu) { + int cpu = cpumask_first(cpu_online_mask); + + tick_do_timer_cpu = (cpu < nr_cpu_ids) ? cpu : + TICK_DO_TIMER_NONE; + } +} + +/* * Shutdown an event device on a given cpu: * * This is called on a life CPU, when a CPU is dead. So we cannot @@ -297,13 +312,6 @@ static void tick_shutdown(unsigned int *cpup) clockevents_exchange_device(dev, NULL); td->evtdev = NULL; } - /* Transfer the do_timer job away from this cpu */ - if (*cpup == tick_do_timer_cpu) { - int cpu = cpumask_first(cpu_online_mask); - - tick_do_timer_cpu = (cpu < nr_cpu_ids) ? cpu : - TICK_DO_TIMER_NONE; - } spin_unlock_irqrestore(&tick_device_lock, flags); } @@ -357,6 +365,10 @@ static int tick_notify(struct notifier_block *nb, unsigned long reason, tick_broadcast_oneshot_control(reason); break; + case CLOCK_EVT_NOTIFY_CPU_DYING: + tick_handover_do_timer(dev); + break; + case CLOCK_EVT_NOTIFY_CPU_DEAD: tick_shutdown_broadcast_oneshot(dev); tick_shutdown_broadcast(dev); diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 2f32969..7dcf6e9 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -17,6 +17,7 @@ #include <linux/clocksource.h> #include <linux/kallsyms.h> #include <linux/seq_file.h> +#include <linux/suspend.h> #include <linux/debugfs.h> #include <linux/hardirq.h> #include <linux/kthread.h> @@ -1965,6 +1966,7 @@ ftrace_enable_sysctl(struct ctl_table *table, int write, #ifdef CONFIG_FUNCTION_GRAPH_TRACER static atomic_t ftrace_graph_active; +static struct notifier_block ftrace_suspend_notifier; int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace) { @@ -2043,6 +2045,27 @@ static int start_graph_tracing(void) return ret; } +/* + * Hibernation protection. + * The state of the current task is too much unstable during + * suspend/restore to disk. We want to protect against that. + */ +static int +ftrace_suspend_notifier_call(struct notifier_block *bl, unsigned long state, + void *unused) +{ + switch (state) { + case PM_HIBERNATION_PREPARE: + pause_graph_tracing(); + break; + + case PM_POST_HIBERNATION: + unpause_graph_tracing(); + break; + } + return NOTIFY_DONE; +} + int register_ftrace_graph(trace_func_graph_ret_t retfunc, trace_func_graph_ent_t entryfunc) { @@ -2050,6 +2073,9 @@ int register_ftrace_graph(trace_func_graph_ret_t retfunc, mutex_lock(&ftrace_sysctl_lock); + ftrace_suspend_notifier.notifier_call = ftrace_suspend_notifier_call; + register_pm_notifier(&ftrace_suspend_notifier); + atomic_inc(&ftrace_graph_active); ret = start_graph_tracing(); if (ret) { @@ -2075,6 +2101,7 @@ void unregister_ftrace_graph(void) ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub; ftrace_graph_entry = ftrace_graph_entry_stub; ftrace_shutdown(FTRACE_STOP_FUNC_RET); + unregister_pm_notifier(&ftrace_suspend_notifier); mutex_unlock(&ftrace_sysctl_lock); } diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 8b0daf0..bd38c5c 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -246,7 +246,7 @@ static inline int test_time_stamp(u64 delta) return 0; } -#define BUF_PAGE_SIZE (PAGE_SIZE - sizeof(struct buffer_data_page)) +#define BUF_PAGE_SIZE (PAGE_SIZE - offsetof(struct buffer_data_page, data)) /* * head_page == tail_page && head == tail then buffer is empty. @@ -1025,12 +1025,8 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer, } if (next_page == head_page) { - if (!(buffer->flags & RB_FL_OVERWRITE)) { - /* reset write */ - if (tail <= BUF_PAGE_SIZE) - local_set(&tail_page->write, tail); + if (!(buffer->flags & RB_FL_OVERWRITE)) goto out_unlock; - } /* tail_page has not moved yet? */ if (tail_page == cpu_buffer->tail_page) { @@ -1105,6 +1101,10 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer, return event; out_unlock: + /* reset write */ + if (tail <= BUF_PAGE_SIZE) + local_set(&tail_page->write, tail); + __raw_spin_unlock(&cpu_buffer->lock); local_irq_restore(flags); return NULL; @@ -2174,6 +2174,9 @@ rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer) cpu_buffer->overrun = 0; cpu_buffer->entries = 0; + + cpu_buffer->write_stamp = 0; + cpu_buffer->read_stamp = 0; } /** diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index c580233..17bb88d 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -40,7 +40,7 @@ #define TRACE_BUFFER_FLAGS (RB_FL_OVERWRITE) -unsigned long __read_mostly tracing_max_latency = (cycle_t)ULONG_MAX; +unsigned long __read_mostly tracing_max_latency; unsigned long __read_mostly tracing_thresh; /* @@ -3736,7 +3736,7 @@ static struct notifier_block trace_die_notifier = { * it if we decide to change what log level the ftrace dump * should be at. */ -#define KERN_TRACE KERN_INFO +#define KERN_TRACE KERN_EMERG static void trace_printk_seq(struct trace_seq *s) @@ -3770,6 +3770,7 @@ void ftrace_dump(void) dump_ran = 1; /* No turning back! */ + tracing_off(); ftrace_kill(); for_each_tracing_cpu(cpu) { diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index 7c2e326..62a78d9 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -380,6 +380,7 @@ static void stop_irqsoff_tracer(struct trace_array *tr) static void __irqsoff_tracer_init(struct trace_array *tr) { + tracing_max_latency = 0; irqsoff_trace = tr; /* make sure that the tracer is visible */ smp_wmb(); diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 43586b6..42ae1e7 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -333,6 +333,7 @@ static void stop_wakeup_tracer(struct trace_array *tr) static int wakeup_tracer_init(struct trace_array *tr) { + tracing_max_latency = 0; wakeup_trace = tr; start_wakeup_tracer(tr); return 0; diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 4d0ea3c..8e4be9c 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -202,6 +202,7 @@ pcg_default_flags[NR_CHARGE_TYPE] = { static void mem_cgroup_get(struct mem_cgroup *mem); static void mem_cgroup_put(struct mem_cgroup *mem); +static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem); static void mem_cgroup_charge_statistics(struct mem_cgroup *mem, struct page_cgroup *pc, @@ -1684,7 +1685,7 @@ move_account: /* This is for making all *used* pages to be on LRU. */ lru_add_drain_all(); ret = 0; - for_each_node_state(node, N_POSSIBLE) { + for_each_node_state(node, N_HIGH_MEMORY) { for (zid = 0; !ret && zid < MAX_NR_ZONES; zid++) { enum lru_list l; for_each_lru(l) { @@ -2193,10 +2194,23 @@ static void mem_cgroup_get(struct mem_cgroup *mem) static void mem_cgroup_put(struct mem_cgroup *mem) { - if (atomic_dec_and_test(&mem->refcnt)) + if (atomic_dec_and_test(&mem->refcnt)) { + struct mem_cgroup *parent = parent_mem_cgroup(mem); __mem_cgroup_free(mem); + if (parent) + mem_cgroup_put(parent); + } } +/* + * Returns the parent mem_cgroup in memcgroup hierarchy with hierarchy enabled. + */ +static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem) +{ + if (!mem->res.parent) + return NULL; + return mem_cgroup_from_res_counter(mem->res.parent, res); +} #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP static void __init enable_swap_cgroup(void) @@ -2235,6 +2249,13 @@ mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont) if (parent && parent->use_hierarchy) { res_counter_init(&mem->res, &parent->res); res_counter_init(&mem->memsw, &parent->memsw); + /* + * We increment refcnt of the parent to ensure that we can + * safely access it on res_counter_charge/uncharge. + * This refcnt will be decremented when freeing this + * mem_cgroup(see mem_cgroup_put). + */ + mem_cgroup_get(parent); } else { res_counter_init(&mem->res, NULL); res_counter_init(&mem->memsw, NULL); @@ -294,14 +294,10 @@ static inline int __mlock_posix_error_return(long retval) * * return number of pages [> 0] to be removed from locked_vm on success * of "special" vmas. - * - * return negative error if vma spanning @start-@range disappears while - * mmap semaphore is dropped. Unlikely? */ long mlock_vma_pages_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - struct mm_struct *mm = vma->vm_mm; int nr_pages = (end - start) / PAGE_SIZE; BUG_ON(!(vma->vm_flags & VM_LOCKED)); @@ -314,20 +310,8 @@ long mlock_vma_pages_range(struct vm_area_struct *vma, if (!((vma->vm_flags & (VM_DONTEXPAND | VM_RESERVED)) || is_vm_hugetlb_page(vma) || vma == get_gate_vma(current))) { - long error; - downgrade_write(&mm->mmap_sem); - - error = __mlock_vma_pages_range(vma, start, end, 1); - up_read(&mm->mmap_sem); - /* vma can change or disappear */ - down_write(&mm->mmap_sem); - vma = find_vma(mm, start); - /* non-NULL vma must contain @start, but need to check @end */ - if (!vma || end > vma->vm_end) - return -ENOMEM; - - return 0; /* hide other errors from mmap(), et al */ + return __mlock_vma_pages_range(vma, start, end, 1); } /* @@ -438,41 +422,14 @@ success: vma->vm_flags = newflags; if (lock) { - /* - * mmap_sem is currently held for write. Downgrade the write - * lock to a read lock so that other faults, mmap scans, ... - * while we fault in all pages. - */ - downgrade_write(&mm->mmap_sem); - ret = __mlock_vma_pages_range(vma, start, end, 1); - /* - * Need to reacquire mmap sem in write mode, as our callers - * expect this. We have no support for atomically upgrading - * a sem to write, so we need to check for ranges while sem - * is unlocked. - */ - up_read(&mm->mmap_sem); - /* vma can change or disappear */ - down_write(&mm->mmap_sem); - *prev = find_vma(mm, start); - /* non-NULL *prev must contain @start, but need to check @end */ - if (!(*prev) || end > (*prev)->vm_end) - ret = -ENOMEM; - else if (ret > 0) { + if (ret > 0) { mm->locked_vm -= ret; ret = 0; } else ret = __mlock_posix_error_return(ret); /* translate if needed */ } else { - /* - * TODO: for unlocking, pages will already be resident, so - * we don't need to wait for allocations/reclaim/pagein, ... - * However, unlocking a very large region can still take a - * while. Should we downgrade the semaphore for both lock - * AND unlock ? - */ __mlock_vma_pages_range(vma, start, end, 0); } @@ -658,6 +658,9 @@ again: remove_next = 1 + (end > next->vm_end); validate_mm(mm); } +/* Flags that can be inherited from an existing mapping when merging */ +#define VM_MERGEABLE_FLAGS (VM_CAN_NONLINEAR) + /* * If the vma has a ->close operation then the driver probably needs to release * per-vma resources, so we don't attempt to merge those. @@ -665,7 +668,7 @@ again: remove_next = 1 + (end > next->vm_end); static inline int is_mergeable_vma(struct vm_area_struct *vma, struct file *file, unsigned long vm_flags) { - if (vma->vm_flags != vm_flags) + if ((vma->vm_flags ^ vm_flags) & ~VM_MERGEABLE_FLAGS) return 0; if (vma->vm_file != file) return 0; @@ -1087,6 +1090,15 @@ int vma_wants_writenotify(struct vm_area_struct *vma) mapping_cap_account_dirty(vma->vm_file->f_mapping); } +/* + * We account for memory if it's a private writeable mapping, + * and VM_NORESERVE wasn't set. + */ +static inline int accountable_mapping(unsigned int vm_flags) +{ + return (vm_flags & (VM_NORESERVE | VM_SHARED | VM_WRITE)) == VM_WRITE; +} + unsigned long mmap_region(struct file *file, unsigned long addr, unsigned long len, unsigned long flags, unsigned int vm_flags, unsigned long pgoff, @@ -1114,36 +1126,32 @@ munmap_back: if (!may_expand_vm(mm, len >> PAGE_SHIFT)) return -ENOMEM; - if (flags & MAP_NORESERVE) + /* + * Set 'VM_NORESERVE' if we should not account for the + * memory use of this mapping. We only honor MAP_NORESERVE + * if we're allowed to overcommit memory. + */ + if ((flags & MAP_NORESERVE) && sysctl_overcommit_memory != OVERCOMMIT_NEVER) + vm_flags |= VM_NORESERVE; + if (!accountable) vm_flags |= VM_NORESERVE; - if (accountable && (!(flags & MAP_NORESERVE) || - sysctl_overcommit_memory == OVERCOMMIT_NEVER)) { - if (vm_flags & VM_SHARED) { - /* Check memory availability in shmem_file_setup? */ - vm_flags |= VM_ACCOUNT; - } else if (vm_flags & VM_WRITE) { - /* - * Private writable mapping: check memory availability - */ - charged = len >> PAGE_SHIFT; - if (security_vm_enough_memory(charged)) - return -ENOMEM; - vm_flags |= VM_ACCOUNT; - } + /* + * Private writable mapping: check memory availability + */ + if (accountable_mapping(vm_flags)) { + charged = len >> PAGE_SHIFT; + if (security_vm_enough_memory(charged)) + return -ENOMEM; + vm_flags |= VM_ACCOUNT; } /* - * Can we just expand an old private anonymous mapping? - * The VM_SHARED test is necessary because shmem_zero_setup - * will create the file object for a shared anonymous map below. + * Can we just expand an old mapping? */ - if (!file && !(vm_flags & VM_SHARED)) { - vma = vma_merge(mm, prev, addr, addr + len, vm_flags, - NULL, NULL, pgoff, NULL); - if (vma) - goto out; - } + vma = vma_merge(mm, prev, addr, addr + len, vm_flags, NULL, file, pgoff, NULL); + if (vma) + goto out; /* * Determine the object being mapped and call the appropriate @@ -1186,14 +1194,6 @@ munmap_back: goto free_vma; } - /* We set VM_ACCOUNT in a shared mapping's vm_flags, to inform - * shmem_zero_setup (perhaps called through /dev/zero's ->mmap) - * that memory reservation must be checked; but that reservation - * belongs to shared memory object, not to vma: so now clear it. - */ - if ((vm_flags & (VM_SHARED|VM_ACCOUNT)) == (VM_SHARED|VM_ACCOUNT)) - vma->vm_flags &= ~VM_ACCOUNT; - /* Can addr have changed?? * * Answer: Yes, several device drivers can do it in their @@ -1206,17 +1206,8 @@ munmap_back: if (vma_wants_writenotify(vma)) vma->vm_page_prot = vm_get_page_prot(vm_flags & ~VM_SHARED); - if (file && vma_merge(mm, prev, addr, vma->vm_end, - vma->vm_flags, NULL, file, pgoff, vma_policy(vma))) { - mpol_put(vma_policy(vma)); - kmem_cache_free(vm_area_cachep, vma); - fput(file); - if (vm_flags & VM_EXECUTABLE) - removed_exe_file_vma(mm); - } else { - vma_link(mm, vma, prev, rb_link, rb_parent); - file = vma->vm_file; - } + vma_link(mm, vma, prev, rb_link, rb_parent); + file = vma->vm_file; /* Once vma denies write, undo our temporary denial count */ if (correct_wcount) @@ -2628,7 +2628,7 @@ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags) goto close_file; #ifdef CONFIG_SHMEM - SHMEM_I(inode)->flags = flags & VM_ACCOUNT; + SHMEM_I(inode)->flags = (flags & VM_NORESERVE) ? 0 : VM_ACCOUNT; #endif d_instantiate(dentry, inode); inode->i_size = size; @@ -1996,7 +1996,7 @@ static struct kmem_cache_cpu *alloc_kmem_cache_cpu(struct kmem_cache *s, static void free_kmem_cache_cpu(struct kmem_cache_cpu *c, int cpu) { if (c < per_cpu(kmem_cache_cpu, cpu) || - c > per_cpu(kmem_cache_cpu, cpu) + NR_KMEM_CACHE_CPU) { + c >= per_cpu(kmem_cache_cpu, cpu) + NR_KMEM_CACHE_CPU) { kfree(c); return; } diff --git a/mm/swapfile.c b/mm/swapfile.c index f48b831..7e6304d 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -698,8 +698,10 @@ static int unuse_pte(struct vm_area_struct *vma, pmd_t *pmd, pte_t *pte; int ret = 1; - if (mem_cgroup_try_charge_swapin(vma->vm_mm, page, GFP_KERNEL, &ptr)) + if (mem_cgroup_try_charge_swapin(vma->vm_mm, page, GFP_KERNEL, &ptr)) { ret = -ENOMEM; + goto out_nolock; + } pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl); if (unlikely(!pte_same(*pte, swp_entry_to_pte(entry)))) { @@ -723,6 +725,7 @@ static int unuse_pte(struct vm_area_struct *vma, pmd_t *pmd, activate_page(page); out: pte_unmap_unlock(pte, ptl); +out_nolock: return ret; } diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 2e5f2ca..da74b84 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2212,10 +2212,10 @@ unsigned int skb_seq_read(unsigned int consumed, const u8 **data, return 0; next_skb: - block_limit = skb_headlen(st->cur_skb); + block_limit = skb_headlen(st->cur_skb) + st->stepped_offset; if (abs_offset < block_limit) { - *data = st->cur_skb->data + abs_offset; + *data = st->cur_skb->data + (abs_offset - st->stepped_offset); return block_limit - abs_offset; } @@ -2250,13 +2250,14 @@ next_skb: st->frag_data = NULL; } - if (st->cur_skb->next) { - st->cur_skb = st->cur_skb->next; + if (st->root_skb == st->cur_skb && + skb_shinfo(st->root_skb)->frag_list) { + st->cur_skb = skb_shinfo(st->root_skb)->frag_list; st->frag_idx = 0; goto next_skb; - } else if (st->root_skb == st->cur_skb && - skb_shinfo(st->root_skb)->frag_list) { - st->cur_skb = skb_shinfo(st->root_skb)->frag_list; + } else if (st->cur_skb->next) { + st->cur_skb = st->cur_skb->next; + st->frag_idx = 0; goto next_skb; } diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index 42a0f3d..d722013 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -1268,6 +1268,9 @@ __be32 __init root_nfs_parse_addr(char *name) static int __init ip_auto_config(void) { __be32 addr; +#ifdef IPCONFIG_DYNAMIC + int retries = CONF_OPEN_RETRIES; +#endif #ifdef CONFIG_PROC_FS proc_net_fops_create(&init_net, "pnp", S_IRUGO, &pnp_seq_fops); @@ -1304,9 +1307,6 @@ static int __init ip_auto_config(void) #endif ic_first_dev->next) { #ifdef IPCONFIG_DYNAMIC - - int retries = CONF_OPEN_RETRIES; - if (ic_dynamic() < 0) { ic_close_devs(); diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 0cd71b8..76b148b 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -524,7 +524,8 @@ static int tcp_splice_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, struct tcp_splice_state *tss = rd_desc->arg.data; int ret; - ret = skb_splice_bits(skb, offset, tss->pipe, rd_desc->count, tss->flags); + ret = skb_splice_bits(skb, offset, tss->pipe, min(rd_desc->count, len), + tss->flags); if (ret > 0) rd_desc->count -= ret; return ret; diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index cf5ab05..b7faffe 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -120,8 +120,11 @@ EXPORT_SYMBOL(sysctl_udp_wmem_min); atomic_t udp_memory_allocated; EXPORT_SYMBOL(udp_memory_allocated); +#define PORTS_PER_CHAIN (65536 / UDP_HTABLE_SIZE) + static int udp_lib_lport_inuse(struct net *net, __u16 num, const struct udp_hslot *hslot, + unsigned long *bitmap, struct sock *sk, int (*saddr_comp)(const struct sock *sk1, const struct sock *sk2)) @@ -132,12 +135,17 @@ static int udp_lib_lport_inuse(struct net *net, __u16 num, sk_nulls_for_each(sk2, node, &hslot->head) if (net_eq(sock_net(sk2), net) && sk2 != sk && - sk2->sk_hash == num && + (bitmap || sk2->sk_hash == num) && (!sk2->sk_reuse || !sk->sk_reuse) && (!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if || sk2->sk_bound_dev_if == sk->sk_bound_dev_if) && - (*saddr_comp)(sk, sk2)) - return 1; + (*saddr_comp)(sk, sk2)) { + if (bitmap) + __set_bit(sk2->sk_hash / UDP_HTABLE_SIZE, + bitmap); + else + return 1; + } return 0; } @@ -160,32 +168,47 @@ int udp_lib_get_port(struct sock *sk, unsigned short snum, if (!snum) { int low, high, remaining; unsigned rand; - unsigned short first; + unsigned short first, last; + DECLARE_BITMAP(bitmap, PORTS_PER_CHAIN); inet_get_local_port_range(&low, &high); remaining = (high - low) + 1; rand = net_random(); - snum = first = rand % remaining + low; - rand |= 1; - for (;;) { - hslot = &udptable->hash[udp_hashfn(net, snum)]; + first = (((u64)rand * remaining) >> 32) + low; + /* + * force rand to be an odd multiple of UDP_HTABLE_SIZE + */ + rand = (rand | 1) * UDP_HTABLE_SIZE; + for (last = first + UDP_HTABLE_SIZE; first != last; first++) { + hslot = &udptable->hash[udp_hashfn(net, first)]; + bitmap_zero(bitmap, PORTS_PER_CHAIN); spin_lock_bh(&hslot->lock); - if (!udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp)) - break; - spin_unlock_bh(&hslot->lock); + udp_lib_lport_inuse(net, snum, hslot, bitmap, sk, + saddr_comp); + + snum = first; + /* + * Iterate on all possible values of snum for this hash. + * Using steps of an odd multiple of UDP_HTABLE_SIZE + * give us randomization and full range coverage. + */ do { - snum = snum + rand; - } while (snum < low || snum > high); - if (snum == first) - goto fail; + if (low <= snum && snum <= high && + !test_bit(snum / UDP_HTABLE_SIZE, bitmap)) + goto found; + snum += rand; + } while (snum != first); + spin_unlock_bh(&hslot->lock); } + goto fail; } else { hslot = &udptable->hash[udp_hashfn(net, snum)]; spin_lock_bh(&hslot->lock); - if (udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp)) + if (udp_lib_lport_inuse(net, snum, hslot, NULL, sk, saddr_comp)) goto fail_unlock; } +found: inet_sk(sk)->num = snum; sk->sk_hash = snum; if (sk_unhashed(sk)) { diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index e92ad84..f9afb45 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -4250,7 +4250,7 @@ static struct addrconf_sysctl_table .procname = "mc_forwarding", .data = &ipv6_devconf.mc_forwarding, .maxlen = sizeof(int), - .mode = 0644, + .mode = 0444, .proc_handler = proc_dointvec, }, #endif diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index 4f43384..36dff88 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -443,10 +443,10 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info, if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6)) goto relookup_failed; - if (ip6_dst_lookup(sk, &dst2, &fl)) + if (ip6_dst_lookup(sk, &dst2, &fl2)) goto relookup_failed; - err = xfrm_lookup(net, &dst2, &fl, sk, XFRM_LOOKUP_ICMP); + err = xfrm_lookup(net, &dst2, &fl2, sk, XFRM_LOOKUP_ICMP); switch (err) { case 0: dst_release(dst); diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index 936f489..f171e8d 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -255,6 +255,7 @@ int ip6_mc_input(struct sk_buff *skb) * IPv6 multicast router mode is now supported ;) */ if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding && + !(ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_LINKLOCAL) && likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) { /* * Okay, we try to forward - split and duplicate @@ -316,7 +317,6 @@ int ip6_mc_input(struct sk_buff *skb) } if (skb2) { - skb2->dev = skb2->dst->dev; ip6_mr_input(skb2); } } diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index 3c51b2d..228be55 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -48,6 +48,7 @@ #include <linux/pim.h> #include <net/addrconf.h> #include <linux/netfilter_ipv6.h> +#include <net/ip6_checksum.h> /* Big lock, protecting vif table, mrt cache and mroute socket state. Note that the changes are semaphored via rtnl_lock. @@ -365,7 +366,9 @@ static int pim6_rcv(struct sk_buff *skb) pim = (struct pimreghdr *)skb_transport_header(skb); if (pim->type != ((PIM_VERSION << 4) | PIM_REGISTER) || (pim->flags & PIM_NULL_REGISTER) || - (ip_compute_csum((void *)pim, sizeof(*pim)) != 0 && + (csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, + sizeof(*pim), IPPROTO_PIM, + csum_partial((void *)pim, sizeof(*pim), 0)) && csum_fold(skb_checksum(skb, 0, skb->len, 0)))) goto drop; @@ -392,7 +395,7 @@ static int pim6_rcv(struct sk_buff *skb) skb_pull(skb, (u8 *)encap - skb->data); skb_reset_network_header(skb); skb->dev = reg_dev; - skb->protocol = htons(ETH_P_IP); + skb->protocol = htons(ETH_P_IPV6); skb->ip_summed = 0; skb->pkt_type = PACKET_HOST; dst_release(skb->dst); @@ -481,6 +484,7 @@ static int mif6_delete(struct net *net, int vifi) { struct mif_device *v; struct net_device *dev; + struct inet6_dev *in6_dev; if (vifi < 0 || vifi >= net->ipv6.maxvif) return -EADDRNOTAVAIL; @@ -513,6 +517,10 @@ static int mif6_delete(struct net *net, int vifi) dev_set_allmulti(dev, -1); + in6_dev = __in6_dev_get(dev); + if (in6_dev) + in6_dev->cnf.mc_forwarding--; + if (v->flags & MIFF_REGISTER) unregister_netdevice(dev); @@ -622,6 +630,7 @@ static int mif6_add(struct net *net, struct mif6ctl *vifc, int mrtsock) int vifi = vifc->mif6c_mifi; struct mif_device *v = &net->ipv6.vif6_table[vifi]; struct net_device *dev; + struct inet6_dev *in6_dev; int err; /* Is vif busy ? */ @@ -662,6 +671,10 @@ static int mif6_add(struct net *net, struct mif6ctl *vifc, int mrtsock) return -EINVAL; } + in6_dev = __in6_dev_get(dev); + if (in6_dev) + in6_dev->cnf.mc_forwarding++; + /* * Fill in the VIF structures */ @@ -838,8 +851,6 @@ static int ip6mr_cache_report(struct net *net, struct sk_buff *pkt, mifi_t mifi, skb->dst = dst_clone(pkt->dst); skb->ip_summed = CHECKSUM_UNNECESSARY; - - skb_pull(skb, sizeof(struct ipv6hdr)); } if (net->ipv6.mroute6_sk == NULL) { @@ -1222,8 +1233,10 @@ static int ip6mr_sk_init(struct sock *sk) rtnl_lock(); write_lock_bh(&mrt_lock); - if (likely(net->ipv6.mroute6_sk == NULL)) + if (likely(net->ipv6.mroute6_sk == NULL)) { net->ipv6.mroute6_sk = sk; + net->ipv6.devconf_all->mc_forwarding++; + } else err = -EADDRINUSE; write_unlock_bh(&mrt_lock); @@ -1242,6 +1255,7 @@ int ip6mr_sk_done(struct sock *sk) if (sk == net->ipv6.mroute6_sk) { write_lock_bh(&mrt_lock); net->ipv6.mroute6_sk = NULL; + net->ipv6.devconf_all->mc_forwarding--; write_unlock_bh(&mrt_lock); mroute_clean_tables(net); diff --git a/net/ipv6/route.c b/net/ipv6/route.c index c4a5982..9c57423 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -794,7 +794,7 @@ void ip6_route_input(struct sk_buff *skb) .proto = iph->nexthdr, }; - if (rt6_need_strict(&iph->daddr)) + if (rt6_need_strict(&iph->daddr) && skb->dev->type != ARPHRD_PIMREG) flags |= RT6_LOOKUP_F_IFACE; skb->dst = fib6_rule_lookup(net, &fl, flags, ip6_pol_route_input); diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 5f94db2..9454d4a 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -77,6 +77,7 @@ #include <linux/poll.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/mutex.h> #ifdef CONFIG_INET #include <net/inet_common.h> @@ -175,6 +176,7 @@ struct packet_sock { #endif struct packet_type prot_hook; spinlock_t bind_lock; + struct mutex pg_vec_lock; unsigned int running:1, /* prot_hook is attached*/ auxdata:1, origdev:1; @@ -1069,6 +1071,7 @@ static int packet_create(struct net *net, struct socket *sock, int protocol) */ spin_lock_init(&po->bind_lock); + mutex_init(&po->pg_vec_lock); po->prot_hook.func = packet_rcv; if (sock->type == SOCK_PACKET) @@ -1865,6 +1868,7 @@ static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing synchronize_net(); err = -EBUSY; + mutex_lock(&po->pg_vec_lock); if (closing || atomic_read(&po->mapped) == 0) { err = 0; #define XC(a, b) ({ __typeof__ ((a)) __t; __t = (a); (a) = (b); __t; }) @@ -1886,6 +1890,7 @@ static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing if (atomic_read(&po->mapped)) printk(KERN_DEBUG "packet_mmap: vma is busy: %d\n", atomic_read(&po->mapped)); } + mutex_unlock(&po->pg_vec_lock); spin_lock(&po->bind_lock); if (was_running && !po->running) { @@ -1918,7 +1923,7 @@ static int packet_mmap(struct file *file, struct socket *sock, struct vm_area_st size = vma->vm_end - vma->vm_start; - lock_sock(sk); + mutex_lock(&po->pg_vec_lock); if (po->pg_vec == NULL) goto out; if (size != po->pg_vec_len*po->pg_vec_pages*PAGE_SIZE) @@ -1941,7 +1946,7 @@ static int packet_mmap(struct file *file, struct socket *sock, struct vm_area_st err = 0; out: - release_sock(sk); + mutex_unlock(&po->pg_vec_lock); return err; } #endif diff --git a/net/wimax/debugfs.c b/net/wimax/debugfs.c index 87cf443..94d216a 100644 --- a/net/wimax/debugfs.c +++ b/net/wimax/debugfs.c @@ -28,17 +28,6 @@ #include "debug-levels.h" -/* Debug framework control of debug levels */ -struct d_level D_LEVEL[] = { - D_SUBMODULE_DEFINE(debugfs), - D_SUBMODULE_DEFINE(id_table), - D_SUBMODULE_DEFINE(op_msg), - D_SUBMODULE_DEFINE(op_reset), - D_SUBMODULE_DEFINE(op_rfkill), - D_SUBMODULE_DEFINE(stack), -}; -size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); - #define __debugfs_register(prefix, name, parent) \ do { \ result = d_level_register_debugfs(prefix, name, parent); \ diff --git a/net/wimax/stack.c b/net/wimax/stack.c index d4da92f..3869c03 100644 --- a/net/wimax/stack.c +++ b/net/wimax/stack.c @@ -516,6 +516,19 @@ void wimax_dev_rm(struct wimax_dev *wimax_dev) } EXPORT_SYMBOL_GPL(wimax_dev_rm); + +/* Debug framework control of debug levels */ +struct d_level D_LEVEL[] = { + D_SUBMODULE_DEFINE(debugfs), + D_SUBMODULE_DEFINE(id_table), + D_SUBMODULE_DEFINE(op_msg), + D_SUBMODULE_DEFINE(op_reset), + D_SUBMODULE_DEFINE(op_rfkill), + D_SUBMODULE_DEFINE(stack), +}; +size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); + + struct genl_family wimax_gnl_family = { .id = GENL_ID_GENERATE, .name = "WiMAX", diff --git a/net/wireless/reg.c b/net/wireless/reg.c index bc494ce..85c9034 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -498,6 +498,7 @@ static struct ieee80211_regdomain *country_ie_2_rd( * calculate the number of reg rules we will need. We will need one * for each channel subband */ while (country_ie_len >= 3) { + int end_channel = 0; struct ieee80211_country_ie_triplet *triplet = (struct ieee80211_country_ie_triplet *) country_ie; int cur_sub_max_channel = 0, cur_channel = 0; @@ -509,9 +510,25 @@ static struct ieee80211_regdomain *country_ie_2_rd( continue; } + /* 2 GHz */ + if (triplet->chans.first_channel <= 14) + end_channel = triplet->chans.first_channel + + triplet->chans.num_channels; + else + /* + * 5 GHz -- For example in country IEs if the first + * channel given is 36 and the number of channels is 4 + * then the individual channel numbers defined for the + * 5 GHz PHY by these parameters are: 36, 40, 44, and 48 + * and not 36, 37, 38, 39. + * + * See: http://tinyurl.com/11d-clarification + */ + end_channel = triplet->chans.first_channel + + (4 * (triplet->chans.num_channels - 1)); + cur_channel = triplet->chans.first_channel; - cur_sub_max_channel = ieee80211_channel_to_frequency( - cur_channel + triplet->chans.num_channels); + cur_sub_max_channel = end_channel; /* Basic sanity check */ if (cur_sub_max_channel < cur_channel) @@ -590,15 +607,6 @@ static struct ieee80211_regdomain *country_ie_2_rd( end_channel = triplet->chans.first_channel + triplet->chans.num_channels; else - /* - * 5 GHz -- For example in country IEs if the first - * channel given is 36 and the number of channels is 4 - * then the individual channel numbers defined for the - * 5 GHz PHY by these parameters are: 36, 40, 44, and 48 - * and not 36, 37, 38, 39. - * - * See: http://tinyurl.com/11d-clarification - */ end_channel = triplet->chans.first_channel + (4 * (triplet->chans.num_channels - 1)); @@ -1276,7 +1284,7 @@ static void reg_country_ie_process_debug( if (intersected_rd) { printk(KERN_DEBUG "cfg80211: We intersect both of these " "and get:\n"); - print_regdomain_info(rd); + print_regdomain_info(intersected_rd); return; } printk(KERN_DEBUG "cfg80211: Intersection between both failed\n"); diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 75de40a..0177ef8 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -347,6 +347,7 @@ static int conexant_mux_enum_put(struct snd_kcontrol *kcontrol, &spec->cur_mux[adc_idx]); } +#ifdef CONFIG_SND_JACK static int conexant_add_jack(struct hda_codec *codec, hda_nid_t nid, int type) { @@ -394,7 +395,6 @@ static void conexant_report_jack(struct hda_codec *codec, hda_nid_t nid) static int conexant_init_jacks(struct hda_codec *codec) { -#ifdef CONFIG_SND_JACK struct conexant_spec *spec = codec->spec; int i; @@ -422,10 +422,19 @@ static int conexant_init_jacks(struct hda_codec *codec) ++hv; } } -#endif return 0; } +#else +static inline void conexant_report_jack(struct hda_codec *codec, hda_nid_t nid) +{ +} + +static inline int conexant_init_jacks(struct hda_codec *codec) +{ + return 0; +} +#endif static int conexant_init(struct hda_codec *codec) { @@ -1566,6 +1575,7 @@ static struct snd_pci_quirk cxt5047_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x30a5, "HP DV5200T/DV8000T", CXT5047_LAPTOP_HP), SND_PCI_QUIRK(0x103c, 0x30b2, "HP DV2000T/DV3000T", CXT5047_LAPTOP), SND_PCI_QUIRK(0x103c, 0x30b5, "HP DV2000Z", CXT5047_LAPTOP), + SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6700", CXT5047_LAPTOP), SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba P100", CXT5047_LAPTOP_EAPD), {} }; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5d249a5..7884a4e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7018,6 +7018,7 @@ static int patch_alc882(struct hda_codec *codec) case 0x106b00a4: /* MacbookPro4,1 */ case 0x106b2c00: /* Macbook Pro rev3 */ case 0x106b3600: /* Macbook 3.1 */ + case 0x106b3800: /* MacbookPro4,1 - latter revision */ board_config = ALC885_MBP3; break; default: diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 3dd4eee..b787b3c 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2539,6 +2539,8 @@ static int stac92xx_build_pcms(struct hda_codec *codec) info->name = "STAC92xx Analog"; info->stream[SNDRV_PCM_STREAM_PLAYBACK] = stac92xx_pcm_analog_playback; + info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = + spec->multiout.dac_nids[0]; info->stream[SNDRV_PCM_STREAM_CAPTURE] = stac92xx_pcm_analog_capture; info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0]; info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = spec->num_adcs; diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 6c21b50..77620ab 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -1451,7 +1451,14 @@ static const struct snd_soc_dai wm8753_all_dai[] = { }, }; -struct snd_soc_dai wm8753_dai[2]; +struct snd_soc_dai wm8753_dai[] = { + { + .name = "WM8753 DAI 0", + }, + { + .name = "WM8753 DAI 1", + }, +}; EXPORT_SYMBOL_GPL(wm8753_dai); static void wm8753_set_dai_mode(struct snd_soc_codec *codec, unsigned int mode) diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index ec5e18a..05dd5ab 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -302,6 +302,10 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai, regs->spcr1 |= RINTM(3); regs->rcr2 |= RFIG; regs->xcr2 |= XFIG; + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + regs->xccr = DXENDLY(1) | XDMAEN; + regs->rccr = RFULL_CYCLE | RDMAEN; + } switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: |