summaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c24xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c24xx')
-rw-r--r--arch/arm/mach-s3c24xx/Kconfig66
-rw-r--r--arch/arm/mach-s3c24xx/Makefile6
-rw-r--r--arch/arm/mach-s3c24xx/cpufreq-debugfs.c198
-rw-r--r--arch/arm/mach-s3c24xx/cpufreq-s3c2410.c160
-rw-r--r--arch/arm/mach-s3c24xx/cpufreq-s3c2412.c258
-rw-r--r--arch/arm/mach-s3c24xx/cpufreq-s3c2440.c312
-rw-r--r--arch/arm/mach-s3c24xx/cpufreq.c711
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/s3c2412.h (renamed from arch/arm/mach-s3c24xx/s3c2412.h)0
-rw-r--r--arch/arm/mach-s3c24xx/iotiming-s3c2412.c2
9 files changed, 28 insertions, 1685 deletions
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 0adb2b8..6d9252e 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -28,7 +28,7 @@ config CPU_S3C2410
select CPU_ARM920T
select CPU_LLSERIAL_S3C2410
select S3C2410_CLOCK
- select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+ select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
select S3C2410_PM if PM
select SAMSUNG_HRT
select SAMSUNG_WDT_RESET
@@ -206,27 +206,38 @@ config S3C24XX_GPIO_EXTRA128
Add an extra 128 gpio numbers to the available GPIO pool. This is
available for boards that need extra gpios for external devices.
+config S3C24XX_PLL
+ bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
+ depends on ARM_S3C24XX
+ help
+ Compile in support for changing the PLL frequency from the
+ S3C24XX series CPUfreq driver. The PLL takes time to settle
+ after a frequency change, so by default it is not enabled.
+
+ This also means that the PLL tables for the selected CPU(s) will
+ be built which may increase the size of the kernel image.
+
# cpu frequency items common between s3c2410 and s3c2440/s3c2442
config S3C2410_IOTIMING
bool
- depends on CPU_FREQ_S3C24XX
+ depends on ARM_S3C24XX_CPUFREQ
help
Internal node to select io timing code that is common to the s3c2410
and s3c2440/s3c2442 cpu frequency support.
config S3C2410_CPUFREQ_UTILS
- bool
- depends on CPU_FREQ_S3C24XX
- help
- Internal node to select timing code that is common to the s3c2410
- and s3c2440/s3c244 cpu frequency support.
+ bool
+ depends on ARM_S3C24XX_CPUFREQ
+ help
+ Internal node to select timing code that is common to the s3c2410
+ and s3c2440/s3c244 cpu frequency support.
# cpu frequency support common to s3c2412, s3c2413 and s3c2442
config S3C2412_IOTIMING
bool
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+ depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443)
help
Intel node to select io timing code that is common to the s3c2412
and the s3c2443.
@@ -235,16 +246,9 @@ config S3C2412_IOTIMING
if CPU_S3C2410
-config S3C2410_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2410
-
config S3C2410_PLL
bool
- depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+ depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL
default y
help
Select the PLL table for the S3C2410
@@ -280,7 +284,7 @@ config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select ISA
select MACH_BAST_IDE
- select S3C2410_IOTIMING if S3C2410_CPUFREQ
+ select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
@@ -387,14 +391,6 @@ config CPU_S3C2412_ONLY
!CPU_S3C2442 && !CPU_S3C2443
default y
-config S3C2412_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX
- default y
- select S3C2412_IOTIMING
- help
- CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
-
config S3C2412_DMA
bool
help
@@ -508,14 +504,6 @@ endif # CPU_S3C2416
if CPU_S3C2440
-config S3C2440_CPUFREQ
- bool "S3C2440/S3C2442 CPU Frequency scaling support"
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
- default y
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
config S3C2440_DMA
bool
help
@@ -535,15 +523,15 @@ config S3C2440_XTAL_16934400
config S3C2440_PLL_12000000
bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
- default y if CPU_FREQ_S3C24XX_PLL
+ depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
config S3C2440_PLL_16934400
bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
- default y if CPU_FREQ_S3C24XX_PLL
+ depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
@@ -597,7 +585,7 @@ config MACH_NEXCODER_2440
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_12000000
select S3C24XX_DCLK
select S3C24XX_GPIO_EXTRA128
@@ -669,7 +657,7 @@ config MACH_RX1950
bool "HP iPAQ rx1950"
select I2C
select PM_H1940 if PM
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
select S3C24XX_DCLK
select S3C24XX_PWM
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 6de730b..7f54e5b 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -17,13 +17,11 @@ obj- :=
obj-y += common.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
-obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o
obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o
-obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
@@ -34,7 +32,6 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
-obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
@@ -59,9 +56,6 @@ obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o
obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o
obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpufreq.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o
-
#
# machine support
# following is ordered alphabetically by option text.
diff --git a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
deleted file mode 100644
index 9b7b428..0000000
--- a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Copyright (c) 2009 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Frequency scaling - debugfs status support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/err.h>
-
-#include <plat/cpu-freq-core.h>
-
-static struct dentry *dbgfs_root;
-static struct dentry *dbgfs_file_io;
-static struct dentry *dbgfs_file_info;
-static struct dentry *dbgfs_file_board;
-
-#define print_ns(x) ((x) / 10), ((x) % 10)
-
-static void show_max(struct seq_file *seq, struct s3c_freq *f)
-{
- seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
- f->fclk, f->hclk, f->pclk, f->armclk);
-}
-
-static int board_show(struct seq_file *seq, void *p)
-{
- struct s3c_cpufreq_config *cfg;
- struct s3c_cpufreq_board *brd;
-
- cfg = s3c_cpufreq_getconfig();
- if (!cfg) {
- seq_printf(seq, "no configuration registered\n");
- return 0;
- }
-
- brd = cfg->board;
- if (!brd) {
- seq_printf(seq, "no board definition set?\n");
- return 0;
- }
-
- seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
- seq_printf(seq, "auto_io=%u\n", brd->auto_io);
- seq_printf(seq, "need_io=%u\n", brd->need_io);
-
- show_max(seq, &brd->max);
-
-
- return 0;
-}
-
-static int fops_board_open(struct inode *inode, struct file *file)
-{
- return single_open(file, board_show, NULL);
-}
-
-static const struct file_operations fops_board = {
- .open = fops_board_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static int info_show(struct seq_file *seq, void *p)
-{
- struct s3c_cpufreq_config *cfg;
-
- cfg = s3c_cpufreq_getconfig();
- if (!cfg) {
- seq_printf(seq, "no configuration registered\n");
- return 0;
- }
-
- seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk);
- seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n",
- cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
- seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk);
- seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
- seq_printf(seq, "\n");
-
- show_max(seq, &cfg->max);
-
- seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
- cfg->divs.h_divisor, cfg->divs.p_divisor,
- cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
- seq_printf(seq, "\n");
-
- seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
-
- return 0;
-}
-
-static int fops_info_open(struct inode *inode, struct file *file)
-{
- return single_open(file, info_show, NULL);
-}
-
-static const struct file_operations fops_info = {
- .open = fops_info_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static int io_show(struct seq_file *seq, void *p)
-{
- void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
- struct s3c_cpufreq_config *cfg;
- struct s3c_iotimings *iot;
- union s3c_iobank *iob;
- int bank;
-
- cfg = s3c_cpufreq_getconfig();
- if (!cfg) {
- seq_printf(seq, "no configuration registered\n");
- return 0;
- }
-
- show_bank = cfg->info->debug_io_show;
- if (!show_bank) {
- seq_printf(seq, "no code to show bank timing\n");
- return 0;
- }
-
- iot = s3c_cpufreq_getiotimings();
- if (!iot) {
- seq_printf(seq, "no io timings registered\n");
- return 0;
- }
-
- seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
-
- for (bank = 0; bank < MAX_BANKS; bank++) {
- iob = &iot->bank[bank];
-
- seq_printf(seq, "bank %d: ", bank);
-
- if (!iob->io_2410) {
- seq_printf(seq, "nothing set\n");
- continue;
- }
-
- show_bank(seq, cfg, iob);
- }
-
- return 0;
-}
-
-static int fops_io_open(struct inode *inode, struct file *file)
-{
- return single_open(file, io_show, NULL);
-}
-
-static const struct file_operations fops_io = {
- .open = fops_io_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-
-static int __init s3c_freq_debugfs_init(void)
-{
- dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
- if (IS_ERR(dbgfs_root)) {
- printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
- return PTR_ERR(dbgfs_root);
- }
-
- dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
- NULL, &fops_io);
-
- dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
- NULL, &fops_info);
-
- dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
- NULL, &fops_board);
-
- return 0;
-}
-
-late_initcall(s3c_freq_debugfs_init);
-
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
deleted file mode 100644
index cfa0dd8..0000000
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright (c) 2006-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 CPU Frequency scaling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/cpu-freq-core.h>
-
-/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
-
-static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
- u32 clkdiv = 0;
-
- if (cfg->divs.h_divisor == 2)
- clkdiv |= S3C2410_CLKDIVN_HDIVN;
-
- if (cfg->divs.p_divisor != cfg->divs.h_divisor)
- clkdiv |= S3C2410_CLKDIVN_PDIVN;
-
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
-}
-
-static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned long hclk, fclk, pclk;
- unsigned int hdiv, pdiv;
- unsigned long hclk_max;
-
- fclk = cfg->freq.fclk;
- hclk_max = cfg->max.hclk;
-
- cfg->freq.armclk = fclk;
-
- s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
- __func__, fclk, hclk_max);
-
- hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
- hclk = fclk / hdiv;
-
- if (hclk > cfg->max.hclk) {
- s3c_freq_dbg("%s: hclk too big\n", __func__);
- return -EINVAL;
- }
-
- pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
- pclk = hclk / pdiv;
-
- if (pclk > cfg->max.pclk) {
- s3c_freq_dbg("%s: pclk too big\n", __func__);
- return -EINVAL;
- }
-
- pdiv *= hdiv;
-
- /* record the result */
- cfg->divs.p_divisor = pdiv;
- cfg->divs.h_divisor = hdiv;
-
- return 0;
-}
-
-static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
- .max = {
- .fclk = 200000000,
- .hclk = 100000000,
- .pclk = 50000000,
- },
-
- /* transition latency is about 5ms worst-case, so
- * set 10ms to be sure */
- .latency = 10000000,
-
- .locktime_m = 150,
- .locktime_u = 150,
- .locktime_bits = 12,
-
- .need_pll = 1,
-
- .name = "s3c2410",
- .calc_iotiming = s3c2410_iotiming_calc,
- .set_iotiming = s3c2410_iotiming_set,
- .get_iotiming = s3c2410_iotiming_get,
- .resume_clocks = s3c2410_setup_clocks,
-
- .set_fvco = s3c2410_set_fvco,
- .set_refresh = s3c2410_cpufreq_setrefresh,
- .set_divs = s3c2410_cpufreq_setdivs,
- .calc_divs = s3c2410_cpufreq_calcdivs,
-
- .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
-};
-
-static int s3c2410_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- return s3c_cpufreq_register(&s3c2410_cpufreq_info);
-}
-
-static struct subsys_interface s3c2410_cpufreq_interface = {
- .name = "s3c2410_cpufreq",
- .subsys = &s3c2410_subsys,
- .add_dev = s3c2410_cpufreq_add,
-};
-
-static int __init s3c2410_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2410_cpufreq_interface);
-}
-arch_initcall(s3c2410_cpufreq_init);
-
-static int s3c2410a_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- /* alter the maximum freq settings for S3C2410A. If a board knows
- * it only has a maximum of 200, then it should register its own
- * limits. */
-
- s3c2410_cpufreq_info.max.fclk = 266000000;
- s3c2410_cpufreq_info.max.hclk = 133000000;
- s3c2410_cpufreq_info.max.pclk = 66500000;
- s3c2410_cpufreq_info.name = "s3c2410a";
-
- return s3c2410_cpufreq_add(dev, sif);
-}
-
-static struct subsys_interface s3c2410a_cpufreq_interface = {
- .name = "s3c2410a_cpufreq",
- .subsys = &s3c2410a_subsys,
- .add_dev = s3c2410a_cpufreq_add,
-};
-
-static int __init s3c2410a_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2410a_cpufreq_interface);
-}
-arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
deleted file mode 100644
index 8bf0f3a..0000000
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412 CPU Frequency scalling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/cpu-freq-core.h>
-
-#include "s3c2412.h"
-
-/* our clock resources. */
-static struct clk *xtal;
-static struct clk *fclk;
-static struct clk *hclk;
-static struct clk *armclk;
-
-/* HDIV: 1, 2, 3, 4, 6, 8 */
-
-static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned int hdiv, pdiv, armdiv, dvs;
- unsigned long hclk, fclk, armclk, armdiv_clk;
- unsigned long hclk_max;
-
- fclk = cfg->freq.fclk;
- armclk = cfg->freq.armclk;
- hclk_max = cfg->max.hclk;
-
- /* We can't run hclk above armclk as at the best we have to
- * have armclk and hclk in dvs mode. */
-
- if (hclk_max > armclk)
- hclk_max = armclk;
-
- s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
- __func__, fclk, armclk, hclk_max);
- s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
- __func__, cfg->freq.fclk, cfg->freq.armclk,
- cfg->freq.hclk, cfg->freq.pclk);
-
- armdiv = fclk / armclk;
-
- if (armdiv < 1)
- armdiv = 1;
- if (armdiv > 2)
- armdiv = 2;
-
- cfg->divs.arm_divisor = armdiv;
- armdiv_clk = fclk / armdiv;
-
- hdiv = armdiv_clk / hclk_max;
- if (hdiv < 1)
- hdiv = 1;
-
- cfg->freq.hclk = hclk = armdiv_clk / hdiv;
-
- /* set dvs depending on whether we reached armclk or not. */
- cfg->divs.dvs = dvs = armclk < armdiv_clk;
-
- /* update the actual armclk we achieved. */
- cfg->freq.armclk = dvs ? hclk : armdiv_clk;
-
- s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
- __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
-
- if (hdiv > 4)
- goto invalid;
-
- pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
-
- if ((hclk / pdiv) > cfg->max.pclk)
- pdiv++;
-
- cfg->freq.pclk = hclk / pdiv;
-
- s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
-
- if (pdiv > 2)
- goto invalid;
-
- pdiv *= hdiv;
-
- /* store the result, and then return */
-
- cfg->divs.h_divisor = hdiv * armdiv;
- cfg->divs.p_divisor = pdiv * armdiv;
-
- return 0;
-
-invalid:
- return -EINVAL;
-}
-
-static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned long clkdiv;
- unsigned long olddiv;
-
- olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
-
- /* clear off current clock info */
-
- clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
- clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
- clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
-
- if (cfg->divs.arm_divisor == 2)
- clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
-
- clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
-
- if (cfg->divs.p_divisor != cfg->divs.h_divisor)
- clkdiv |= S3C2412_CLKDIVN_PDIVN;
-
- s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
-
- clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
-}
-
-static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
- struct s3c_cpufreq_board *board = cfg->board;
- unsigned long refresh;
-
- s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
- board->refresh, cfg->freq.hclk);
-
- /* Reduce both the refresh time (in ns) and the frequency (in MHz)
- * by 10 each to ensure that we do not overflow 32 bit numbers. This
- * should work for HCLK up to 133MHz and refresh period up to 30usec.
- */
-
- refresh = (board->refresh / 10);
- refresh *= (cfg->freq.hclk / 100);
- refresh /= (1 * 1000 * 1000); /* 10^6 */
-
- s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
- __raw_writel(refresh, S3C2412_REFRESH);
-}
-
-/* set the default cpu frequency information, based on an 200MHz part
- * as we have no other way of detecting the speed rating in software.
- */
-
-static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
- .max = {
- .fclk = 200000000,
- .hclk = 100000000,
- .pclk = 50000000,
- },
-
- .latency = 5000000, /* 5ms */
-
- .locktime_m = 150,
- .locktime_u = 150,
- .locktime_bits = 16,
-
- .name = "s3c2412",
- .set_refresh = s3c2412_cpufreq_setrefresh,
- .set_divs = s3c2412_cpufreq_setdivs,
- .calc_divs = s3c2412_cpufreq_calcdivs,
-
- .calc_iotiming = s3c2412_iotiming_calc,
- .set_iotiming = s3c2412_iotiming_set,
- .get_iotiming = s3c2412_iotiming_get,
-
- .resume_clocks = s3c2412_setup_clocks,
-
- .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
-};
-
-static int s3c2412_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- unsigned long fclk_rate;
-
- hclk = clk_get(NULL, "hclk");
- if (IS_ERR(hclk)) {
- printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
- return -ENOENT;
- }
-
- fclk = clk_get(NULL, "fclk");
- if (IS_ERR(fclk)) {
- printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
- goto err_fclk;
- }
-
- fclk_rate = clk_get_rate(fclk);
- if (fclk_rate > 200000000) {
- printk(KERN_INFO
- "%s: fclk %ld MHz, assuming 266MHz capable part\n",
- __func__, fclk_rate / 1000000);
- s3c2412_cpufreq_info.max.fclk = 266000000;
- s3c2412_cpufreq_info.max.hclk = 133000000;
- s3c2412_cpufreq_info.max.pclk = 66000000;
- }
-
- armclk = clk_get(NULL, "armclk");
- if (IS_ERR(armclk)) {
- printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
- goto err_armclk;
- }
-
- xtal = clk_get(NULL, "xtal");
- if (IS_ERR(xtal)) {
- printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
- goto err_xtal;
- }
-
- return s3c_cpufreq_register(&s3c2412_cpufreq_info);
-
-err_xtal:
- clk_put(armclk);
-err_armclk:
- clk_put(fclk);
-err_fclk:
- clk_put(hclk);
-
- return -ENOENT;
-}
-
-static struct subsys_interface s3c2412_cpufreq_interface = {
- .name = "s3c2412_cpufreq",
- .subsys = &s3c2412_subsys,
- .add_dev = s3c2412_cpufreq_add,
-};
-
-static int s3c2412_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2412_cpufreq_interface);
-}
-arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
deleted file mode 100644
index 72b2cc8..0000000
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
- * Copyright (c) 2006-2009 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- * Vincent Sanders <vince@simtec.co.uk>
- *
- * S3C2440/S3C2442 CPU Frequency scaling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
-#include <plat/clock.h>
-
-static struct clk *xtal;
-static struct clk *fclk;
-static struct clk *hclk;
-static struct clk *armclk;
-
-/* HDIV: 1, 2, 3, 4, 6, 8 */
-
-static inline int within_khz(unsigned long a, unsigned long b)
-{
- long diff = a - b;
-
- return (diff >= -1000 && diff <= 1000);
-}
-
-/**
- * s3c2440_cpufreq_calcdivs - calculate divider settings
- * @cfg: The cpu frequency settings.
- *
- * Calcualte the divider values for the given frequency settings
- * specified in @cfg. The values are stored in @cfg for later use
- * by the relevant set routine if the request settings can be reached.
- */
-int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned int hdiv, pdiv;
- unsigned long hclk, fclk, armclk;
- unsigned long hclk_max;
-
- fclk = cfg->freq.fclk;
- armclk = cfg->freq.armclk;
- hclk_max = cfg->max.hclk;
-
- s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
- __func__, fclk, armclk, hclk_max);
-
- if (armclk > fclk) {
- printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
- armclk = fclk;
- }
-
- /* if we are in DVS, we need HCLK to be <= ARMCLK */
- if (armclk < fclk && armclk < hclk_max)
- hclk_max = armclk;
-
- for (hdiv = 1; hdiv < 9; hdiv++) {
- if (hdiv == 5 || hdiv == 7)
- hdiv++;
-
- hclk = (fclk / hdiv);
- if (hclk <= hclk_max || within_khz(hclk, hclk_max))
- break;
- }
-
- s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
-
- if (hdiv > 8)
- goto invalid;
-
- pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
-
- if ((hclk / pdiv) > cfg->max.pclk)
- pdiv++;
-
- s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
-
- if (pdiv > 2)
- goto invalid;
-
- pdiv *= hdiv;
-
- /* calculate a valid armclk */
-
- if (armclk < hclk)
- armclk = hclk;
-
- /* if we're running armclk lower than fclk, this really means
- * that the system should go into dvs mode, which means that
- * armclk is connected to hclk. */
- if (armclk < fclk) {
- cfg->divs.dvs = 1;
- armclk = hclk;
- } else
- cfg->divs.dvs = 0;
-
- cfg->freq.armclk = armclk;
-
- /* store the result, and then return */
-
- cfg->divs.h_divisor = hdiv;
- cfg->divs.p_divisor = pdiv;
-
- return 0;
-
- invalid:
- return -EINVAL;
-}
-
-#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
- S3C2440_CAMDIVN_HCLK4_HALF)
-
-/**
- * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
- * @cfg: The cpu frequency settings.
- *
- * Set the divisors from the settings in @cfg, which where generated
- * during the calculation phase by s3c2440_cpufreq_calcdivs().
- */
-static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
- unsigned long clkdiv, camdiv;
-
- s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
- cfg->divs.h_divisor, cfg->divs.p_divisor);
-
- clkdiv = __raw_readl(S3C2410_CLKDIVN);
- camdiv = __raw_readl(S3C2440_CAMDIVN);
-
- clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
- camdiv &= ~CAMDIVN_HCLK_HALF;
-
- switch (cfg->divs.h_divisor) {
- case 1:
- clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
- break;
-
- case 2:
- clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
- break;
-
- case 6:
- camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
- case 3:
- clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
- break;
-
- case 8:
- camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
- case 4:
- clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
- break;
-
- default:
- BUG(); /* we don't expect to get here. */
- }
-
- if (cfg->divs.p_divisor != cfg->divs.h_divisor)
- clkdiv |= S3C2440_CLKDIVN_PDIVN;
-
- /* todo - set pclk. */
-
- /* Write the divisors first with hclk intentionally halved so that
- * when we write clkdiv we will under-frequency instead of over. We
- * then make a short delay and remove the hclk halving if necessary.
- */
-
- __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
-
- ndelay(20);
- __raw_writel(camdiv, S3C2440_CAMDIVN);
-
- clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
-}
-
-static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
- int *divs,
- struct cpufreq_frequency_table *table,
- size_t table_size)
-{
- unsigned long freq;
- int index = 0;
- int div;
-
- for (div = *divs; div > 0; div = *divs++) {
- freq = fclk / div;
-
- if (freq > max_hclk && div != 1)
- continue;
-
- freq /= 1000; /* table is in kHz */
- index = s3c_cpufreq_addfreq(table, index, table_size, freq);
- if (index < 0)
- break;
- }
-
- return index;
-}
-
-static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
-
-static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
- struct cpufreq_frequency_table *table,
- size_t table_size)
-{
- int ret;
-
- WARN_ON(cfg->info == NULL);
- WARN_ON(cfg->board == NULL);
-
- ret = run_freq_for(cfg->info->max.hclk,
- cfg->info->max.fclk,
- hclk_divs,
- table, table_size);
-
- s3c_freq_dbg("%s: returning %d\n", __func__, ret);
-
- return ret;
-}
-
-struct s3c_cpufreq_info s3c2440_cpufreq_info = {
- .max = {
- .fclk = 400000000,
- .hclk = 133333333,
- .pclk = 66666666,
- },
-
- .locktime_m = 300,
- .locktime_u = 300,
- .locktime_bits = 16,
-
- .name = "s3c244x",
- .calc_iotiming = s3c2410_iotiming_calc,
- .set_iotiming = s3c2410_iotiming_set,
- .get_iotiming = s3c2410_iotiming_get,
- .set_fvco = s3c2410_set_fvco,
-
- .set_refresh = s3c2410_cpufreq_setrefresh,
- .set_divs = s3c2440_cpufreq_setdivs,
- .calc_divs = s3c2440_cpufreq_calcdivs,
- .calc_freqtable = s3c2440_cpufreq_calctable,
-
- .resume_clocks = s3c244x_setup_clocks,
-
- .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
-};
-
-static int s3c2440_cpufreq_add(struct device *dev,
- struct subsys_interface *sif)
-{
- xtal = s3c_cpufreq_clk_get(NULL, "xtal");
- hclk = s3c_cpufreq_clk_get(NULL, "hclk");
- fclk = s3c_cpufreq_clk_get(NULL, "fclk");
- armclk = s3c_cpufreq_clk_get(NULL, "armclk");
-
- if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
- printk(KERN_ERR "%s: failed to get clocks\n", __func__);
- return -ENOENT;
- }
-
- return s3c_cpufreq_register(&s3c2440_cpufreq_info);
-}
-
-static struct subsys_interface s3c2440_cpufreq_interface = {
- .name = "s3c2440_cpufreq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_cpufreq_add,
-};
-
-static int s3c2440_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2440_cpufreq_interface);
-}
-
-/* arch_initcall adds the clocks we need, so use subsys_initcall. */
-subsys_initcall(s3c2440_cpufreq_init);
-
-static struct subsys_interface s3c2442_cpufreq_interface = {
- .name = "s3c2442_cpufreq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c2440_cpufreq_add,
-};
-
-static int s3c2442_cpufreq_init(void)
-{
- return subsys_interface_register(&s3c2442_cpufreq_interface);
-}
-subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq.c
deleted file mode 100644
index 3c0e78e..0000000
--- a/arch/arm/mach-s3c24xx/cpufreq.c
+++ /dev/null
@@ -1,711 +0,0 @@
-/*
- * Copyright (c) 2006-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Frequency scaling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/sysfs.h>
-#include <linux/slab.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/cpu-freq-core.h>
-
-#include <mach/regs-clock.h>
-
-/* note, cpufreq support deals in kHz, no Hz */
-
-static struct cpufreq_driver s3c24xx_driver;
-static struct s3c_cpufreq_config cpu_cur;
-static struct s3c_iotimings s3c24xx_iotiming;
-static struct cpufreq_frequency_table *pll_reg;
-static unsigned int last_target = ~0;
-static unsigned int ftab_size;
-static struct cpufreq_frequency_table *ftab;
-
-static struct clk *_clk_mpll;
-static struct clk *_clk_xtal;
-static struct clk *clk_fclk;
-static struct clk *clk_hclk;
-static struct clk *clk_pclk;
-static struct clk *clk_arm;
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
-struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
-{
- return &cpu_cur;
-}
-
-struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
-{
- return &s3c24xx_iotiming;
-}
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
-
-static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
-{
- unsigned long fclk, pclk, hclk, armclk;
-
- cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
- cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
- cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
- cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
-
- cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
- cfg->pll.frequency = fclk;
-
- cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
-
- cfg->divs.h_divisor = fclk / hclk;
- cfg->divs.p_divisor = fclk / pclk;
-}
-
-static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
-{
- unsigned long pll = cfg->pll.frequency;
-
- cfg->freq.fclk = pll;
- cfg->freq.hclk = pll / cfg->divs.h_divisor;
- cfg->freq.pclk = pll / cfg->divs.p_divisor;
-
- /* convert hclk into 10ths of nanoseconds for io calcs */
- cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
-}
-
-static inline int closer(unsigned int target, unsigned int n, unsigned int c)
-{
- int diff_cur = abs(target - c);
- int diff_new = abs(target - n);
-
- return (diff_new < diff_cur);
-}
-
-static void s3c_cpufreq_show(const char *pfx,
- struct s3c_cpufreq_config *cfg)
-{
- s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
- pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
- cfg->freq.hclk, cfg->divs.h_divisor,
- cfg->freq.pclk, cfg->divs.p_divisor);
-}
-
-/* functions to wrapper the driver info calls to do the cpu specific work */
-
-static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
-{
- if (cfg->info->set_iotiming)
- (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
-}
-
-static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
-{
- if (cfg->info->calc_iotiming)
- return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
-
- return 0;
-}
-
-static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
- (cfg->info->set_refresh)(cfg);
-}
-
-static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
- (cfg->info->set_divs)(cfg);
-}
-
-static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
- return (cfg->info->calc_divs)(cfg);
-}
-
-static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
-{
- (cfg->info->set_fvco)(cfg);
-}
-
-static inline void s3c_cpufreq_resume_clocks(void)
-{
- cpu_cur.info->resume_clocks();
-}
-
-static inline void s3c_cpufreq_updateclk(struct clk *clk,
- unsigned int freq)
-{
- clk_set_rate(clk, freq);
-}
-
-static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
- unsigned int target_freq,
- struct cpufreq_frequency_table *pll)
-{
- struct s3c_cpufreq_freqs freqs;
- struct s3c_cpufreq_config cpu_new;
- unsigned long flags;
-
- cpu_new = cpu_cur; /* copy new from current */
-
- s3c_cpufreq_show("cur", &cpu_cur);
-
- /* TODO - check for DMA currently outstanding */
-
- cpu_new.pll = pll ? *pll : cpu_cur.pll;
-
- if (pll)
- freqs.pll_changing = 1;
-
- /* update our frequencies */
-
- cpu_new.freq.armclk = target_freq;
- cpu_new.freq.fclk = cpu_new.pll.frequency;
-
- if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
- printk(KERN_ERR "no divisors for %d\n", target_freq);
- goto err_notpossible;
- }
-
- s3c_freq_dbg("%s: got divs\n", __func__);
-
- s3c_cpufreq_calc(&cpu_new);
-
- s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
-
- if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
- if (s3c_cpufreq_calcio(&cpu_new) < 0) {
- printk(KERN_ERR "%s: no IO timings\n", __func__);
- goto err_notpossible;
- }
- }
-
- s3c_cpufreq_show("new", &cpu_new);
-
- /* setup our cpufreq parameters */
-
- freqs.old = cpu_cur.freq;
- freqs.new = cpu_new.freq;
-
- freqs.freqs.old = cpu_cur.freq.armclk / 1000;
- freqs.freqs.new = cpu_new.freq.armclk / 1000;
-
- /* update f/h/p clock settings before we issue the change
- * notification, so that drivers do not need to do anything
- * special if they want to recalculate on CPUFREQ_PRECHANGE. */
-
- s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
- s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
- s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
- s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
-
- /* start the frequency change */
- cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_PRECHANGE);
-
- /* If hclk is staying the same, then we do not need to
- * re-write the IO or the refresh timings whilst we are changing
- * speed. */
-
- local_irq_save(flags);
-
- /* is our memory clock slowing down? */
- if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
- s3c_cpufreq_setrefresh(&cpu_new);
- s3c_cpufreq_setio(&cpu_new);
- }
-
- if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
- /* not changing PLL, just set the divisors */
-
- s3c_cpufreq_setdivs(&cpu_new);
- } else {
- if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
- /* slow the cpu down, then set divisors */
-
- s3c_cpufreq_setfvco(&cpu_new);
- s3c_cpufreq_setdivs(&cpu_new);
- } else {
- /* set the divisors, then speed up */
-
- s3c_cpufreq_setdivs(&cpu_new);
- s3c_cpufreq_setfvco(&cpu_new);
- }
- }
-
- /* did our memory clock speed up */
- if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
- s3c_cpufreq_setrefresh(&cpu_new);
- s3c_cpufreq_setio(&cpu_new);
- }
-
- /* update our current settings */
- cpu_cur = cpu_new;
-
- local_irq_restore(flags);
-
- /* notify everyone we've done this */
- cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_POSTCHANGE);
-
- s3c_freq_dbg("%s: finished\n", __func__);
- return 0;
-
- err_notpossible:
- printk(KERN_ERR "no compatible settings for %d\n", target_freq);
- return -EINVAL;
-}
-
-/* s3c_cpufreq_target
- *
- * called by the cpufreq core to adjust the frequency that the CPU
- * is currently running at.
- */
-
-static int s3c_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_frequency_table *pll;
- unsigned int index;
-
- /* avoid repeated calls which cause a needless amout of duplicated
- * logging output (and CPU time as the calculation process is
- * done) */
- if (target_freq == last_target)
- return 0;
-
- last_target = target_freq;
-
- s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
- __func__, policy, target_freq, relation);
-
- if (ftab) {
- if (cpufreq_frequency_table_target(policy, ftab,
- target_freq, relation,
- &index)) {
- s3c_freq_dbg("%s: table failed\n", __func__);
- return -EINVAL;
- }
-
- s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
- target_freq, index, ftab[index].frequency);
- target_freq = ftab[index].frequency;
- }
-
- target_freq *= 1000; /* convert target to Hz */
-
- /* find the settings for our new frequency */
-
- if (!pll_reg || cpu_cur.lock_pll) {
- /* either we've not got any PLL values, or we've locked
- * to the current one. */
- pll = NULL;
- } else {
- struct cpufreq_policy tmp_policy;
- int ret;
-
- /* we keep the cpu pll table in Hz, to ensure we get an
- * accurate value for the PLL output. */
-
- tmp_policy.min = policy->min * 1000;
- tmp_policy.max = policy->max * 1000;
- tmp_policy.cpu = policy->cpu;
-
- /* cpufreq_frequency_table_target uses a pointer to 'index'
- * which is the number of the table entry, not the value of
- * the table entry's index field. */
-
- ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
- target_freq, relation,
- &index);
-
- if (ret < 0) {
- printk(KERN_ERR "%s: no PLL available\n", __func__);
- goto err_notpossible;
- }
-
- pll = pll_reg + index;
-
- s3c_freq_dbg("%s: target %u => %u\n",
- __func__, target_freq, pll->frequency);
-
- target_freq = pll->frequency;
- }
-
- return s3c_cpufreq_settarget(policy, target_freq, pll);
-
- err_notpossible:
- printk(KERN_ERR "no compatible settings for %d\n", target_freq);
- return -EINVAL;
-}
-
-static unsigned int s3c_cpufreq_get(unsigned int cpu)
-{
- return clk_get_rate(clk_arm) / 1000;
-}
-
-struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
-{
- struct clk *clk;
-
- clk = clk_get(dev, name);
- if (IS_ERR(clk))
- printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
-
- return clk;
-}
-
-static int s3c_cpufreq_init(struct cpufreq_policy *policy)
-{
- printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
-
- if (policy->cpu != 0)
- return -EINVAL;
-
- policy->cur = s3c_cpufreq_get(0);
- policy->min = policy->cpuinfo.min_freq = 0;
- policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
- /* feed the latency information from the cpu driver */
- policy->cpuinfo.transition_latency = cpu_cur.info->latency;
-
- if (ftab)
- cpufreq_frequency_table_cpuinfo(policy, ftab);
-
- return 0;
-}
-
-static __init int s3c_cpufreq_initclks(void)
-{
- _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
- _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
- clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
- clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
- clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
- clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
-
- if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
- IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
- printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
- return -ENOENT;
- }
-
- printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
- clk_get_rate(clk_fclk) / 1000,
- clk_get_rate(clk_hclk) / 1000,
- clk_get_rate(clk_pclk) / 1000,
- clk_get_rate(clk_arm) / 1000);
-
- return 0;
-}
-
-static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
-{
- if (policy->cpu != 0)
- return -EINVAL;
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static struct cpufreq_frequency_table suspend_pll;
-static unsigned int suspend_freq;
-
-static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
-{
- suspend_pll.frequency = clk_get_rate(_clk_mpll);
- suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
- suspend_freq = s3c_cpufreq_get(0) * 1000;
-
- return 0;
-}
-
-static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
-{
- int ret;
-
- s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
-
- last_target = ~0; /* invalidate last_target setting */
-
- /* first, find out what speed we resumed at. */
- s3c_cpufreq_resume_clocks();
-
- /* whilst we will be called later on, we try and re-set the
- * cpu frequencies as soon as possible so that we do not end
- * up resuming devices and then immediately having to re-set
- * a number of settings once these devices have restarted.
- *
- * as a note, it is expected devices are not used until they
- * have been un-suspended and at that time they should have
- * used the updated clock settings.
- */
-
- ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
- if (ret) {
- printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
- return ret;
- }
-
- return 0;
-}
-#else
-#define s3c_cpufreq_resume NULL
-#define s3c_cpufreq_suspend NULL
-#endif
-
-static struct cpufreq_driver s3c24xx_driver = {
- .flags = CPUFREQ_STICKY,
- .verify = s3c_cpufreq_verify,
- .target = s3c_cpufreq_target,
- .get = s3c_cpufreq_get,
- .init = s3c_cpufreq_init,
- .suspend = s3c_cpufreq_suspend,
- .resume = s3c_cpufreq_resume,
- .name = "s3c24xx",
-};
-
-
-int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
-{
- if (!info || !info->name) {
- printk(KERN_ERR "%s: failed to pass valid information\n",
- __func__);
- return -EINVAL;
- }
-
- printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
- info->name);
-
- /* check our driver info has valid data */
-
- BUG_ON(info->set_refresh == NULL);
- BUG_ON(info->set_divs == NULL);
- BUG_ON(info->calc_divs == NULL);
-
- /* info->set_fvco is optional, depending on whether there
- * is a need to set the clock code. */
-
- cpu_cur.info = info;
-
- /* Note, driver registering should probably update locktime */
-
- return 0;
-}
-
-int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
-{
- struct s3c_cpufreq_board *ours;
-
- if (!board) {
- printk(KERN_INFO "%s: no board data\n", __func__);
- return -EINVAL;
- }
-
- /* Copy the board information so that each board can make this
- * initdata. */
-
- ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
- if (ours == NULL) {
- printk(KERN_ERR "%s: no memory\n", __func__);
- return -ENOMEM;
- }
-
- *ours = *board;
- cpu_cur.board = ours;
-
- return 0;
-}
-
-int __init s3c_cpufreq_auto_io(void)
-{
- int ret;
-
- if (!cpu_cur.info->get_iotiming) {
- printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
- return -ENOENT;
- }
-
- printk(KERN_INFO "%s: working out IO settings\n", __func__);
-
- ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
- if (ret)
- printk(KERN_ERR "%s: failed to get timings\n", __func__);
-
- return ret;
-}
-
-/* if one or is zero, then return the other, otherwise return the min */
-#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
-
-/**
- * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
- * @dst: The destination structure
- * @a: One argument.
- * @b: The other argument.
- *
- * Create a minimum of each frequency entry in the 'struct s3c_freq',
- * unless the entry is zero when it is ignored and the non-zero argument
- * used.
- */
-static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
- struct s3c_freq *a, struct s3c_freq *b)
-{
- dst->fclk = do_min(a->fclk, b->fclk);
- dst->hclk = do_min(a->hclk, b->hclk);
- dst->pclk = do_min(a->pclk, b->pclk);
- dst->armclk = do_min(a->armclk, b->armclk);
-}
-
-static inline u32 calc_locktime(u32 freq, u32 time_us)
-{
- u32 result;
-
- result = freq * time_us;
- result = DIV_ROUND_UP(result, 1000 * 1000);
-
- return result;
-}
-
-static void s3c_cpufreq_update_loctkime(void)
-{
- unsigned int bits = cpu_cur.info->locktime_bits;
- u32 rate = (u32)clk_get_rate(_clk_xtal);
- u32 val;
-
- if (bits == 0) {
- WARN_ON(1);
- return;
- }
-
- val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
- val |= calc_locktime(rate, cpu_cur.info->locktime_m);
-
- printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
- __raw_writel(val, S3C2410_LOCKTIME);
-}
-
-static int s3c_cpufreq_build_freq(void)
-{
- int size, ret;
-
- if (!cpu_cur.info->calc_freqtable)
- return -EINVAL;
-
- kfree(ftab);
- ftab = NULL;
-
- size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
- size++;
-
- ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
- if (!ftab) {
- printk(KERN_ERR "%s: no memory for tables\n", __func__);
- return -ENOMEM;
- }
-
- ftab_size = size;
-
- ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
- s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
-
- return 0;
-}
-
-static int __init s3c_cpufreq_initcall(void)
-{
- int ret = 0;
-
- if (cpu_cur.info && cpu_cur.board) {
- ret = s3c_cpufreq_initclks();
- if (ret)
- goto out;
-
- /* get current settings */
- s3c_cpufreq_getcur(&cpu_cur);
- s3c_cpufreq_show("cur", &cpu_cur);
-
- if (cpu_cur.board->auto_io) {
- ret = s3c_cpufreq_auto_io();
- if (ret) {
- printk(KERN_ERR "%s: failed to get io timing\n",
- __func__);
- goto out;
- }
- }
-
- if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
- printk(KERN_ERR "%s: no IO support registered\n",
- __func__);
- ret = -EINVAL;
- goto out;
- }
-
- if (!cpu_cur.info->need_pll)
- cpu_cur.lock_pll = 1;
-
- s3c_cpufreq_update_loctkime();
-
- s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
- &cpu_cur.info->max);
-
- if (cpu_cur.info->calc_freqtable)
- s3c_cpufreq_build_freq();
-
- ret = cpufreq_register_driver(&s3c24xx_driver);
- }
-
- out:
- return ret;
-}
-
-late_initcall(s3c_cpufreq_initcall);
-
-/**
- * s3c_plltab_register - register CPU PLL table.
- * @plls: The list of PLL entries.
- * @plls_no: The size of the PLL entries @plls.
- *
- * Register the given set of PLLs with the system.
- */
-int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
- unsigned int plls_no)
-{
- struct cpufreq_frequency_table *vals;
- unsigned int size;
-
- size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
-
- vals = kmalloc(size, GFP_KERNEL);
- if (vals) {
- memcpy(vals, plls, size);
- pll_reg = vals;
-
- /* write a terminating entry, we don't store it in the
- * table that is stored in the kernel */
- vals += plls_no;
- vals->frequency = CPUFREQ_TABLE_END;
-
- printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
- } else
- printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
-
- return vals ? 0 : -ENOMEM;
-}
diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
index 548ced4..548ced4 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.h
+++ b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
index 663436d..bd064c0 100644
--- a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
@@ -31,7 +31,7 @@
#include <plat/cpu-freq-core.h>
#include <plat/clock.h>
-#include "s3c2412.h"
+#include <mach/s3c2412.h>
#define print_ns(x) ((x) / 10), ((x) % 10)