diff options
Diffstat (limited to 'drivers/char/ip2')
-rw-r--r-- | drivers/char/ip2/Makefile | 2 | ||||
-rw-r--r-- | drivers/char/ip2/ip2base.c | 108 | ||||
-rw-r--r-- | drivers/char/ip2/ip2main.c | 92 |
3 files changed, 77 insertions, 125 deletions
diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile index 939618f..bc397d9 100644 --- a/drivers/char/ip2/Makefile +++ b/drivers/char/ip2/Makefile @@ -4,5 +4,5 @@ obj-$(CONFIG_COMPUTONE) += ip2.o -ip2-objs := ip2base.o ip2main.o +ip2-objs := ip2main.o diff --git a/drivers/char/ip2/ip2base.c b/drivers/char/ip2/ip2base.c deleted file mode 100644 index 8155e24..0000000 --- a/drivers/char/ip2/ip2base.c +++ /dev/null @@ -1,108 +0,0 @@ -// ip2.c -// This is a dummy module to make the firmware available when needed -// and allows it to be unloaded when not. Rumor is the __initdata -// macro doesn't always works on all platforms so we use this kludge. -// If not compiled as a module it just makes fip_firm avaliable then -// __initdata should work as advertized -// - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/wait.h> - -#ifndef __init -#define __init -#endif -#ifndef __initfunc -#define __initfunc(a) a -#endif -#ifndef __initdata -#define __initdata -#endif - -#include "ip2types.h" - -int -ip2_loadmain(int *, int *); // ref into ip2main.c - -/* Note: Add compiled in defaults to these arrays, not to the structure - in ip2.h any longer. That structure WILL get overridden - by these values, or command line values, or insmod values!!! =mhw= -*/ -static int io[IP2_MAX_BOARDS]= { 0, 0, 0, 0 }; -static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 }; - -static int poll_only = 0; - -MODULE_AUTHOR("Doug McNash"); -MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(irq,"Interrupts for IntelliPort Cards"); -module_param_array(io, int, NULL, 0); -MODULE_PARM_DESC(io,"I/O ports for IntelliPort Cards"); -module_param(poll_only, bool, 0); -MODULE_PARM_DESC(poll_only,"Do not use card interrupts"); - - -static int __init ip2_init(void) -{ - if( poll_only ) { - /* Hard lock the interrupts to zero */ - irq[0] = irq[1] = irq[2] = irq[3] = 0; - } - - return ip2_loadmain(io, irq); -} -module_init(ip2_init); - -MODULE_LICENSE("GPL"); - -#ifndef MODULE -/****************************************************************************** - * ip2_setup: - * str: kernel command line string - * - * Can't autoprobe the boards so user must specify configuration on - * kernel command line. Sane people build it modular but the others - * come here. - * - * Alternating pairs of io,irq for up to 4 boards. - * ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 - * - * io=0 => No board - * io=1 => PCI - * io=2 => EISA - * else => ISA I/O address - * - * irq=0 or invalid for ISA will revert to polling mode - * - * Any value = -1, do not overwrite compiled in value. - * - ******************************************************************************/ -static int __init ip2_setup(char *str) -{ - int ints[10]; /* 4 boards, 2 parameters + 2 */ - int i, j; - - str = get_options (str, ARRAY_SIZE(ints), ints); - - for( i = 0, j = 1; i < 4; i++ ) { - if( j > ints[0] ) { - break; - } - if( ints[j] >= 0 ) { - io[i] = ints[j]; - } - j++; - if( j > ints[0] ) { - break; - } - if( ints[j] >= 0 ) { - irq[i] = ints[j]; - } - j++; - } - return 1; -} -__setup("ip2=", ip2_setup); -#endif /* !MODULE */ diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index 689f9dc..79bca61 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -157,9 +157,6 @@ static char *pcVersion = "1.2.14"; static char *pcDriver_name = "ip2"; static char *pcIpl = "ip2ipl"; -// cheezy kludge or genius - you decide? -int ip2_loadmain(int *, int *); - /***********************/ /* Function Prototypes */ /***********************/ @@ -287,6 +284,7 @@ static int tracewrap; MODULE_AUTHOR("Doug McNash"); MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); +MODULE_LICENSE("GPL"); static int poll_only = 0; @@ -297,6 +295,22 @@ static int iindx; static char rirqs[IP2_MAX_BOARDS]; static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0}; +/* Note: Add compiled in defaults to these arrays, not to the structure + in ip2.h any longer. That structure WILL get overridden + by these values, or command line values, or insmod values!!! =mhw= +*/ +static int io[IP2_MAX_BOARDS]; +static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 }; + +MODULE_AUTHOR("Doug McNash"); +MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); +module_param_array(irq, int, NULL, 0); +MODULE_PARM_DESC(irq, "Interrupts for IntelliPort Cards"); +module_param_array(io, int, NULL, 0); +MODULE_PARM_DESC(io, "I/O ports for IntelliPort Cards"); +module_param(poll_only, bool, 0); +MODULE_PARM_DESC(poll_only, "Do not use card interrupts"); + /* for sysfs class support */ static struct class *ip2_class; @@ -494,8 +508,53 @@ static const struct firmware *ip2_request_firmware(void) return fw; } -int -ip2_loadmain(int *iop, int *irqp) +#ifndef MODULE +/****************************************************************************** + * ip2_setup: + * str: kernel command line string + * + * Can't autoprobe the boards so user must specify configuration on + * kernel command line. Sane people build it modular but the others + * come here. + * + * Alternating pairs of io,irq for up to 4 boards. + * ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 + * + * io=0 => No board + * io=1 => PCI + * io=2 => EISA + * else => ISA I/O address + * + * irq=0 or invalid for ISA will revert to polling mode + * + * Any value = -1, do not overwrite compiled in value. + * + ******************************************************************************/ +static int __init ip2_setup(char *str) +{ + int j, ints[10]; /* 4 boards, 2 parameters + 2 */ + unsigned int i; + + str = get_options(str, ARRAY_SIZE(ints), ints); + + for (i = 0, j = 1; i < 4; i++) { + if (j > ints[0]) + break; + if (ints[j] >= 0) + io[i] = ints[j]; + j++; + if (j > ints[0]) + break; + if (ints[j] >= 0) + irq[i] = ints[j]; + j++; + } + return 1; +} +__setup("ip2=", ip2_setup); +#endif /* !MODULE */ + +static int ip2_loadmain(void) { int i, j, box; int err = 0; @@ -505,6 +564,11 @@ ip2_loadmain(int *iop, int *irqp) static struct pci_dev *pci_dev_i = NULL; const struct firmware *fw = NULL; + if (poll_only) { + /* Hard lock the interrupts to zero */ + irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0; + } + ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0 ); /* process command line arguments to modprobe or @@ -512,14 +576,11 @@ ip2_loadmain(int *iop, int *irqp) /* irqp and iop should ALWAYS be specified now... But we check them individually just to be sure, anyways... */ for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { - if (iop) { - ip2config.addr[i] = iop[i]; - if (irqp) { - if( irqp[i] >= 0 ) { - ip2config.irq[i] = irqp[i]; - } else { - ip2config.irq[i] = 0; - } + ip2config.addr[i] = io[i]; + if (irq[i] >= 0) + ip2config.irq[i] = irq[i]; + else + ip2config.irq[i] = 0; // This is a little bit of a hack. If poll_only=1 on command // line back in ip2.c OR all IRQs on all specified boards are // explicitly set to 0, then drop to poll only mode and override @@ -531,9 +592,7 @@ ip2_loadmain(int *iop, int *irqp) // to -1, is to use 0 as a hard coded, do not probe. // // /\/\|=mhw=|\/\/ - poll_only |= irqp[i]; - } - } + poll_only |= irq[i]; } poll_only = !poll_only; @@ -783,6 +842,7 @@ out_chrdev: out: return err; } +module_init(ip2_loadmain); /******************************************************************************/ /* Function: ip2_init_board() */ |