diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.c')
-rw-r--r-- | drivers/net/bnx2x/bnx2x_link.c | 4897 |
1 files changed, 2472 insertions, 2425 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index fcf99bf..e2509aa 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -181,20 +181,6 @@ (_bank + (_addr & 0xf)), \ _val) -static void bnx2x_set_serdes_access(struct bnx2x *bp, u8 port) -{ - u32 emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - - /* Set Clause 22 */ - REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + port*0x10, 1); - REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000); - udelay(500); - REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245d000f); - udelay(500); - /* Set Clause 45 */ - REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + port*0x10, 0); -} - static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits) { u32 val = REG_RD(bp, reg); @@ -510,175 +496,6 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars, return 0; } -static void bnx2x_serdes_deassert(struct bnx2x *bp, u8 port) -{ - u32 val; - - DP(NETIF_MSG_LINK, "bnx2x_serdes_deassert\n"); - - val = SERDES_RESET_BITS << (port*16); - - /* reset and unreset the SerDes/XGXS */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); - udelay(500); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); - - bnx2x_set_serdes_access(bp, port); - - REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_DEVAD + - port*0x10, - DEFAULT_PHY_DEV_ADDR); -} - -static void bnx2x_xgxs_deassert(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 port; - u32 val; - DP(NETIF_MSG_LINK, "bnx2x_xgxs_deassert\n"); - port = params->port; - - val = XGXS_RESET_BITS << (port*16); - - /* reset and unreset the SerDes/XGXS */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); - udelay(500); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); - - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + - port*0x18, 0); - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, - params->phy[INT_PHY].def_md_devad); -} -void bnx2x_link_status_update(struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 link_10g; - u8 port = params->port; - - if (params->switch_cfg == SWITCH_CFG_1G) - vars->phy_flags = PHY_SERDES_FLAG; - else - vars->phy_flags = PHY_XGXS_FLAG; - vars->link_status = REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - port_mb[port].link_status)); - - vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP); - - if (vars->link_up) { - DP(NETIF_MSG_LINK, "phy link up\n"); - - vars->phy_link_up = 1; - vars->duplex = DUPLEX_FULL; - switch (vars->link_status & - LINK_STATUS_SPEED_AND_DUPLEX_MASK) { - case LINK_10THD: - vars->duplex = DUPLEX_HALF; - /* fall thru */ - case LINK_10TFD: - vars->line_speed = SPEED_10; - break; - - case LINK_100TXHD: - vars->duplex = DUPLEX_HALF; - /* fall thru */ - case LINK_100T4: - case LINK_100TXFD: - vars->line_speed = SPEED_100; - break; - - case LINK_1000THD: - vars->duplex = DUPLEX_HALF; - /* fall thru */ - case LINK_1000TFD: - vars->line_speed = SPEED_1000; - break; - - case LINK_2500THD: - vars->duplex = DUPLEX_HALF; - /* fall thru */ - case LINK_2500TFD: - vars->line_speed = SPEED_2500; - break; - - case LINK_10GTFD: - vars->line_speed = SPEED_10000; - break; - - case LINK_12GTFD: - vars->line_speed = SPEED_12000; - break; - - case LINK_12_5GTFD: - vars->line_speed = SPEED_12500; - break; - - case LINK_13GTFD: - vars->line_speed = SPEED_13000; - break; - - case LINK_15GTFD: - vars->line_speed = SPEED_15000; - break; - - case LINK_16GTFD: - vars->line_speed = SPEED_16000; - break; - - default: - break; - } - - vars->flow_ctrl = 0; - if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED) - vars->flow_ctrl |= BNX2X_FLOW_CTRL_TX; - - if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED) - vars->flow_ctrl |= BNX2X_FLOW_CTRL_RX; - - if (!vars->flow_ctrl) - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - - if (vars->line_speed && - ((vars->line_speed == SPEED_10) || - (vars->line_speed == SPEED_100))) { - vars->phy_flags |= PHY_SGMII_FLAG; - } else { - vars->phy_flags &= ~PHY_SGMII_FLAG; - } - - /* anything 10 and over uses the bmac */ - link_10g = ((vars->line_speed == SPEED_10000) || - (vars->line_speed == SPEED_12000) || - (vars->line_speed == SPEED_12500) || - (vars->line_speed == SPEED_13000) || - (vars->line_speed == SPEED_15000) || - (vars->line_speed == SPEED_16000)); - if (link_10g) - vars->mac_type = MAC_TYPE_BMAC; - else - vars->mac_type = MAC_TYPE_EMAC; - - } else { /* link down */ - DP(NETIF_MSG_LINK, "phy link down\n"); - - vars->phy_link_up = 0; - - vars->line_speed = 0; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - - /* indicate no mac active */ - vars->mac_type = MAC_TYPE_NONE; - } - - DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x\n", - vars->link_status, vars->phy_link_up); - DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n", - vars->line_speed, vars->duplex, vars->flow_ctrl); -} static void bnx2x_update_mng(struct link_params *params, u32 link_status) { @@ -1023,6 +840,196 @@ static void bnx2x_set_aer_mmd(struct link_params *params, MDIO_AER_BLOCK_AER_REG, 0x3800 + offset); } +/******************************************************************/ +/* Internal phy section */ +/******************************************************************/ + +static void bnx2x_set_serdes_access(struct bnx2x *bp, u8 port) +{ + u32 emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + + /* Set Clause 22 */ + REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + port*0x10, 1); + REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000); + udelay(500); + REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245d000f); + udelay(500); + /* Set Clause 45 */ + REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + port*0x10, 0); +} + +static void bnx2x_serdes_deassert(struct bnx2x *bp, u8 port) +{ + u32 val; + + DP(NETIF_MSG_LINK, "bnx2x_serdes_deassert\n"); + + val = SERDES_RESET_BITS << (port*16); + + /* reset and unreset the SerDes/XGXS */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); + udelay(500); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); + + bnx2x_set_serdes_access(bp, port); + + REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_DEVAD + + port*0x10, + DEFAULT_PHY_DEV_ADDR); +} + +static void bnx2x_xgxs_deassert(struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u8 port; + u32 val; + DP(NETIF_MSG_LINK, "bnx2x_xgxs_deassert\n"); + port = params->port; + + val = XGXS_RESET_BITS << (port*16); + + /* reset and unreset the SerDes/XGXS */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); + udelay(500); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); + + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + + port*0x18, 0); + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, + params->phy[INT_PHY].def_md_devad); +} + +void bnx2x_link_status_update(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 link_10g; + u8 port = params->port; + + if (params->switch_cfg == SWITCH_CFG_1G) + vars->phy_flags = PHY_SERDES_FLAG; + else + vars->phy_flags = PHY_XGXS_FLAG; + vars->link_status = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + port_mb[port].link_status)); + + vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP); + + if (vars->link_up) { + DP(NETIF_MSG_LINK, "phy link up\n"); + + vars->phy_link_up = 1; + vars->duplex = DUPLEX_FULL; + switch (vars->link_status & + LINK_STATUS_SPEED_AND_DUPLEX_MASK) { + case LINK_10THD: + vars->duplex = DUPLEX_HALF; + /* fall thru */ + case LINK_10TFD: + vars->line_speed = SPEED_10; + break; + + case LINK_100TXHD: + vars->duplex = DUPLEX_HALF; + /* fall thru */ + case LINK_100T4: + case LINK_100TXFD: + vars->line_speed = SPEED_100; + break; + + case LINK_1000THD: + vars->duplex = DUPLEX_HALF; + /* fall thru */ + case LINK_1000TFD: + vars->line_speed = SPEED_1000; + break; + + case LINK_2500THD: + vars->duplex = DUPLEX_HALF; + /* fall thru */ + case LINK_2500TFD: + vars->line_speed = SPEED_2500; + break; + + case LINK_10GTFD: + vars->line_speed = SPEED_10000; + break; + + case LINK_12GTFD: + vars->line_speed = SPEED_12000; + break; + + case LINK_12_5GTFD: + vars->line_speed = SPEED_12500; + break; + + case LINK_13GTFD: + vars->line_speed = SPEED_13000; + break; + + case LINK_15GTFD: + vars->line_speed = SPEED_15000; + break; + + case LINK_16GTFD: + vars->line_speed = SPEED_16000; + break; + + default: + break; + } + + vars->flow_ctrl = 0; + if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED) + vars->flow_ctrl |= BNX2X_FLOW_CTRL_TX; + + if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED) + vars->flow_ctrl |= BNX2X_FLOW_CTRL_RX; + + if (!vars->flow_ctrl) + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + + if (vars->line_speed && + ((vars->line_speed == SPEED_10) || + (vars->line_speed == SPEED_100))) { + vars->phy_flags |= PHY_SGMII_FLAG; + } else { + vars->phy_flags &= ~PHY_SGMII_FLAG; + } + + /* anything 10 and over uses the bmac */ + link_10g = ((vars->line_speed == SPEED_10000) || + (vars->line_speed == SPEED_12000) || + (vars->line_speed == SPEED_12500) || + (vars->line_speed == SPEED_13000) || + (vars->line_speed == SPEED_15000) || + (vars->line_speed == SPEED_16000)); + if (link_10g) + vars->mac_type = MAC_TYPE_BMAC; + else + vars->mac_type = MAC_TYPE_EMAC; + + } else { /* link down */ + DP(NETIF_MSG_LINK, "phy link down\n"); + + vars->phy_link_up = 0; + + vars->line_speed = 0; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + + /* indicate no mac active */ + vars->mac_type = MAC_TYPE_NONE; + } + + DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x\n", + vars->link_status, vars->phy_link_up); + DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n", + vars->line_speed, vars->duplex, vars->flow_ctrl); +} + + static void bnx2x_set_master_ln(struct link_params *params, struct bnx2x_phy *phy) { @@ -1271,9 +1278,9 @@ static void bnx2x_set_autoneg(struct bnx2x_phy *phy, reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX; CL45_WR_OVER_CL22(bp, phy, - MDIO_REG_BANK_CL73_IEEEB1, - MDIO_CL73_IEEEB1_AN_ADV2, - reg_val); + MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_ADV2, + reg_val); /* CL73 Autoneg Enabled */ reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN; @@ -1560,42 +1567,6 @@ static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result) } -static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 ld_pause; /* local */ - u16 lp_pause; /* link partner */ - u16 pause_result; - u8 ret = 0; - /* read twice */ - - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - - if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) - vars->flow_ctrl = phy->req_flow_ctrl; - else if (phy->req_line_speed != SPEED_AUTO_NEG) - vars->flow_ctrl = params->req_fc_auto_adv; - else if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) { - ret = 1; - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_ADV_PAUSE, &ld_pause); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_LP_AUTO_NEG, &lp_pause); - pause_result = (ld_pause & - MDIO_AN_REG_ADV_PAUSE_MASK) >> 8; - pause_result |= (lp_pause & - MDIO_AN_REG_ADV_PAUSE_MASK) >> 10; - DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n", - pause_result); - bnx2x_pause_resolve(vars, pause_result); - } - return ret; -} - static u8 bnx2x_direct_parallel_detect_used(struct bnx2x_phy *phy, struct link_params *params) { @@ -2004,6 +1975,79 @@ static u8 bnx2x_emac_program(struct link_params *params, return 0; } +static void bnx2x_set_preemphasis(struct bnx2x_phy *phy, + struct link_params *params) +{ + + u16 bank, i = 0; + struct bnx2x *bp = params->bp; + + for (bank = MDIO_REG_BANK_RX0, i = 0; bank <= MDIO_REG_BANK_RX3; + bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0), i++) { + CL45_WR_OVER_CL22(bp, phy, + bank, + MDIO_RX0_RX_EQ_BOOST, + phy->rx_preemphasis[i]); + } + + for (bank = MDIO_REG_BANK_TX0, i = 0; bank <= MDIO_REG_BANK_TX3; + bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0), i++) { + CL45_WR_OVER_CL22(bp, phy, + bank, + MDIO_TX0_TX_DRIVER, + phy->tx_preemphasis[i]); + } +} + +static void bnx2x_init_internal_phy(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 enable_cl73 = (SINGLE_MEDIA_DIRECT(params) || + (params->loopback_mode == LOOPBACK_XGXS)); + if (!(vars->phy_flags & PHY_SGMII_FLAG)) { + if (SINGLE_MEDIA_DIRECT(params) && + (params->feature_config_flags & + FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) + bnx2x_set_preemphasis(phy, params); + + /* forced speed requested? */ + if (vars->line_speed != SPEED_AUTO_NEG || + (SINGLE_MEDIA_DIRECT(params) && + params->loopback_mode == LOOPBACK_EXT)) { + DP(NETIF_MSG_LINK, "not SGMII, no AN\n"); + + /* disable autoneg */ + bnx2x_set_autoneg(phy, params, vars, 0); + + /* program speed and duplex */ + bnx2x_program_serdes(phy, params, vars); + + } else { /* AN_mode */ + DP(NETIF_MSG_LINK, "not SGMII, AN\n"); + + /* AN enabled */ + bnx2x_set_brcm_cl37_advertisment(phy, params); + + /* program duplex & pause advertisement (for aneg) */ + bnx2x_set_ieee_aneg_advertisment(phy, params, + vars->ieee_fc); + + /* enable autoneg */ + bnx2x_set_autoneg(phy, params, vars, enable_cl73); + + /* enable and restart AN */ + bnx2x_restart_autoneg(phy, params, enable_cl73); + } + + } else { /* SGMII mode */ + DP(NETIF_MSG_LINK, "SGMII\n"); + + bnx2x_initialize_sgmii_process(phy, params, vars); + } +} + static u8 bnx2x_init_serdes(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) @@ -2058,16 +2102,845 @@ static u8 bnx2x_init_xgxs(struct bnx2x_phy *phy, return rc; } +static u16 bnx2x_wait_reset_complete(struct bnx2x *bp, + struct bnx2x_phy *phy) +{ + u16 cnt, ctrl; + /* Wait for soft reset to get cleared upto 1 sec */ + for (cnt = 0; cnt < 1000; cnt++) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, &ctrl); + if (!(ctrl & (1<<15))) + break; + msleep(1); + } + DP(NETIF_MSG_LINK, "control reg 0x%x (after %d ms)\n", ctrl, cnt); + return cnt; +} + +static void bnx2x_link_int_enable(struct link_params *params) +{ + u8 port = params->port; + u32 mask; + struct bnx2x *bp = params->bp; + + /* setting the status to report on link up + for either XGXS or SerDes */ + + if (params->switch_cfg == SWITCH_CFG_10G) { + mask = (NIG_MASK_XGXS0_LINK10G | + NIG_MASK_XGXS0_LINK_STATUS); + DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n"); + if (!(SINGLE_MEDIA_DIRECT(params)) && + params->phy[INT_PHY].type != + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) { + mask |= NIG_MASK_MI_INT; + DP(NETIF_MSG_LINK, "enabled external phy int\n"); + } + + } else { /* SerDes */ + mask = NIG_MASK_SERDES0_LINK_STATUS; + DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n"); + if (!(SINGLE_MEDIA_DIRECT(params)) && + params->phy[INT_PHY].type != + PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN) { + mask |= NIG_MASK_MI_INT; + DP(NETIF_MSG_LINK, "enabled external phy int\n"); + } + } + bnx2x_bits_en(bp, + NIG_REG_MASK_INTERRUPT_PORT0 + port*4, + mask); + + DP(NETIF_MSG_LINK, "port %x, is_xgxs %x, int_status 0x%x\n", port, + (params->switch_cfg == SWITCH_CFG_10G), + REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); + DP(NETIF_MSG_LINK, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x\n", + REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), + REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), + REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS+port*0x3c)); + DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n", + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); +} + +static void bnx2x_8481_rearm_latch_signal(struct bnx2x *bp, u8 port, + u8 is_mi_int) +{ + u32 latch_status = 0, is_mi_int_status; + /* Disable the MI INT ( external phy int ) + * by writing 1 to the status register. Link down indication + * is high-active-signal, so in this case we need to write the + * status to clear the XOR + */ + /* Read Latched signals */ + latch_status = REG_RD(bp, + NIG_REG_LATCH_STATUS_0 + port*8); + is_mi_int_status = REG_RD(bp, + NIG_REG_STATUS_INTERRUPT_PORT0 + port*4); + DP(NETIF_MSG_LINK, "original_signal = 0x%x, nig_status = 0x%x," + "latch_status = 0x%x\n", + is_mi_int, is_mi_int_status, latch_status); + /* Handle only those with latched-signal=up.*/ + if (latch_status & 1) { + /* For all latched-signal=up,Write original_signal to status */ + if (is_mi_int) + bnx2x_bits_en(bp, + NIG_REG_STATUS_INTERRUPT_PORT0 + + port*4, + NIG_STATUS_EMAC0_MI_INT); + else + bnx2x_bits_dis(bp, + NIG_REG_STATUS_INTERRUPT_PORT0 + + port*4, + NIG_STATUS_EMAC0_MI_INT); + /* For all latched-signal=up : Re-Arm Latch signals */ + REG_WR(bp, NIG_REG_LATCH_STATUS_0 + port*8, + (latch_status & 0xfffe) | (latch_status & 1)); + } +} + +static void bnx2x_link_int_ack(struct link_params *params, + struct link_vars *vars, u8 is_10g, + u8 is_mi_int) +{ + struct bnx2x *bp = params->bp; + u8 port = params->port; + + /* first reset all status + * we assume only one line will be change at a time */ + bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, + (NIG_STATUS_XGXS0_LINK10G | + NIG_STATUS_XGXS0_LINK_STATUS | + NIG_STATUS_SERDES0_LINK_STATUS)); + if ((params->phy[EXT_PHY1].type + == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) || + (params->phy[EXT_PHY1].type + == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823)) { + bnx2x_8481_rearm_latch_signal(bp, port, is_mi_int); + } + if (vars->phy_link_up) { + if (is_10g) { + /* Disable the 10G link interrupt + * by writing 1 to the status register + */ + DP(NETIF_MSG_LINK, "10G XGXS phy link up\n"); + bnx2x_bits_en(bp, + NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, + NIG_STATUS_XGXS0_LINK10G); + + } else if (params->switch_cfg == SWITCH_CFG_10G) { + /* Disable the link interrupt + * by writing 1 to the relevant lane + * in the status register + */ + u32 ser_lane = ((params->lane_config & + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); + + DP(NETIF_MSG_LINK, "%d speed XGXS phy link up\n", + vars->line_speed); + bnx2x_bits_en(bp, + NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, + ((1 << ser_lane) << + NIG_STATUS_XGXS0_LINK_STATUS_SIZE)); + + } else { /* SerDes */ + DP(NETIF_MSG_LINK, "SerDes phy link up\n"); + /* Disable the link interrupt + * by writing 1 to the status register + */ + bnx2x_bits_en(bp, + NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, + NIG_STATUS_SERDES0_LINK_STATUS); + } + + } +} + +static u8 bnx2x_format_ver(u32 num, u8 *str, u16 *len) +{ + u8 *str_ptr = str; + u32 mask = 0xf0000000; + u8 shift = 8*4; + u8 digit; + if (*len < 10) { + /* Need more than 10chars for this format */ + *str_ptr = '\0'; + return -EINVAL; + } + while (shift > 0) { + + shift -= 4; + digit = ((num & mask) >> shift); + if (digit < 0xa) + *str_ptr = digit + '0'; + else + *str_ptr = digit - 0xa + 'a'; + str_ptr++; + mask = mask >> 4; + if (shift == 4*4) { + *str_ptr = ':'; + str_ptr++; + } + } + *str_ptr = '\0'; + return 0; +} + +static u8 bnx2x_null_format_ver(u32 spirom_ver, u8 *str, u16 *len) +{ + str[0] = '\0'; + (*len)--; + return 0; +} + +u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, + u8 *version, u16 len) +{ + struct bnx2x *bp; + u32 spirom_ver = 0; + u8 status = 0; + u8 *ver_p = version; + if (version == NULL || params == NULL) + return -EINVAL; + bp = params->bp; + + /* Extract first external phy*/ + version[0] = '\0'; + spirom_ver = REG_RD(bp, params->phy[EXT_PHY1].ver_addr); + + if (params->phy[EXT_PHY1].format_fw_ver) + status |= params->phy[EXT_PHY1].format_fw_ver(spirom_ver, + ver_p, + &len); + return status; +} + +static void bnx2x_set_xgxs_loopback(struct bnx2x_phy *phy, + struct link_params *params) +{ + u8 port = params->port; + struct bnx2x *bp = params->bp; + + if (phy->req_line_speed != SPEED_1000) { + u32 md_devad; + + DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n"); + + /* change the uni_phy_addr in the nig */ + md_devad = REG_RD(bp, (NIG_REG_XGXS0_CTRL_MD_DEVAD + + port*0x18)); + + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, 0x5); + + bnx2x_cl45_write(bp, phy, + 5, + (MDIO_REG_BANK_AER_BLOCK + + (MDIO_AER_BLOCK_AER_REG & 0xf)), + 0x2800); + + bnx2x_cl45_write(bp, phy, + 5, + (MDIO_REG_BANK_CL73_IEEEB0 + + (MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)), + 0x6041); + msleep(200); + /* set aer mmd back */ + bnx2x_set_aer_mmd(params, phy); + + /* and md_devad */ + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, + md_devad); + + } else { + u16 mii_ctrl; + DP(NETIF_MSG_LINK, "XGXS 1G loopback enable\n"); + bnx2x_cl45_read(bp, phy, 5, + (MDIO_REG_BANK_COMBO_IEEE0 + + (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)), + &mii_ctrl); + bnx2x_cl45_write(bp, phy, 5, + (MDIO_REG_BANK_COMBO_IEEE0 + + (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)), + mii_ctrl | + MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK); + } +} + +/* + *------------------------------------------------------------------------ + * bnx2x_override_led_value - + * + * Override the led value of the requested led + * + *------------------------------------------------------------------------ + */ +u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port, + u32 led_idx, u32 value) +{ + u32 reg_val; + + /* If port 0 then use EMAC0, else use EMAC1*/ + u32 emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + + DP(NETIF_MSG_LINK, + "bnx2x_override_led_value() port %x led_idx %d value %d\n", + port, led_idx, value); + + switch (led_idx) { + case 0: /* 10MB led */ + /* Read the current value of the LED register in + the EMAC block */ + reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED); + /* Set the OVERRIDE bit to 1 */ + reg_val |= EMAC_LED_OVERRIDE; + /* If value is 1, set the 10M_OVERRIDE bit, + otherwise reset it.*/ + reg_val = (value == 1) ? (reg_val | EMAC_LED_10MB_OVERRIDE) : + (reg_val & ~EMAC_LED_10MB_OVERRIDE); + REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); + break; + case 1: /*100MB led */ + /*Read the current value of the LED register in + the EMAC block */ + reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED); + /* Set the OVERRIDE bit to 1 */ + reg_val |= EMAC_LED_OVERRIDE; + /* If value is 1, set the 100M_OVERRIDE bit, + otherwise reset it.*/ + reg_val = (value == 1) ? (reg_val | EMAC_LED_100MB_OVERRIDE) : + (reg_val & ~EMAC_LED_100MB_OVERRIDE); + REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); + break; + case 2: /* 1000MB led */ + /* Read the current value of the LED register in the + EMAC block */ + reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED); + /* Set the OVERRIDE bit to 1 */ + reg_val |= EMAC_LED_OVERRIDE; + /* If value is 1, set the 1000M_OVERRIDE bit, otherwise + reset it. */ + reg_val = (value == 1) ? (reg_val | EMAC_LED_1000MB_OVERRIDE) : + (reg_val & ~EMAC_LED_1000MB_OVERRIDE); + REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); + break; + case 3: /* 2500MB led */ + /* Read the current value of the LED register in the + EMAC block*/ + reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED); + /* Set the OVERRIDE bit to 1 */ + reg_val |= EMAC_LED_OVERRIDE; + /* If value is 1, set the 2500M_OVERRIDE bit, otherwise + reset it.*/ + reg_val = (value == 1) ? (reg_val | EMAC_LED_2500MB_OVERRIDE) : + (reg_val & ~EMAC_LED_2500MB_OVERRIDE); + REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); + break; + case 4: /*10G led */ + if (port == 0) { + REG_WR(bp, NIG_REG_LED_10G_P0, + value); + } else { + REG_WR(bp, NIG_REG_LED_10G_P1, + value); + } + break; + case 5: /* TRAFFIC led */ + /* Find if the traffic control is via BMAC or EMAC */ + if (port == 0) + reg_val = REG_RD(bp, NIG_REG_NIG_EMAC0_EN); + else + reg_val = REG_RD(bp, NIG_REG_NIG_EMAC1_EN); + + /* Override the traffic led in the EMAC:*/ + if (reg_val == 1) { + /* Read the current value of the LED register in + the EMAC block */ + reg_val = REG_RD(bp, emac_base + + EMAC_REG_EMAC_LED); + /* Set the TRAFFIC_OVERRIDE bit to 1 */ + reg_val |= EMAC_LED_OVERRIDE; + /* If value is 1, set the TRAFFIC bit, otherwise + reset it.*/ + reg_val = (value == 1) ? (reg_val | EMAC_LED_TRAFFIC) : + (reg_val & ~EMAC_LED_TRAFFIC); + REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); + } else { /* Override the traffic led in the BMAC: */ + REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + + port*4, 1); + REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 + port*4, + value); + } + break; + default: + DP(NETIF_MSG_LINK, + "bnx2x_override_led_value() unknown led index %d " + "(should be 0-5)\n", led_idx); + return -EINVAL; + } + + return 0; +} + +u8 bnx2x_set_led(struct link_params *params, u8 mode, u32 speed) +{ + u8 port = params->port; + u16 hw_led_mode = params->hw_led_mode; + u8 rc = 0; + u32 tmp; + u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode); + DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n", + speed, hw_led_mode); + switch (mode) { + case LED_MODE_OFF: + REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 0); + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, + SHARED_HW_CFG_LED_MAC1); + + tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); + EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE)); + break; + + case LED_MODE_OPER: + if (SINGLE_MEDIA_DIRECT(params)) { + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); + REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); + } else { + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, + hw_led_mode); + } + + REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + + port*4, 0); + /* Set blinking rate to ~15.9Hz */ + REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4, + LED_BLINK_RATE_VAL); + REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + + port*4, 1); + tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); + EMAC_WR(bp, EMAC_REG_EMAC_LED, + (tmp & (~EMAC_LED_OVERRIDE))); + + if (CHIP_IS_E1(bp) && + ((speed == SPEED_2500) || + (speed == SPEED_1000) || + (speed == SPEED_100) || + (speed == SPEED_10))) { + /* On Everest 1 Ax chip versions for speeds less than + 10G LED scheme is different */ + REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + + port*4, 1); + REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 + + port*4, 0); + REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 + + port*4, 1); + } + break; + + default: + rc = -EINVAL; + DP(NETIF_MSG_LINK, "bnx2x_set_led: Invalid led mode %d\n", + mode); + break; + } + return rc; + +} + +u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 gp_status = 0, phy_index = 0; + + CL45_RD_OVER_CL22(bp, ¶ms->phy[INT_PHY], + MDIO_REG_BANK_GP_STATUS, + MDIO_GP_STATUS_TOP_AN_STATUS1, + &gp_status); + /* link is up only if both local phy and external phy are up */ + if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { + u8 ext_phy_link_up = 1; + struct link_vars temp_vars; + for (phy_index = EXT_PHY1; phy_index < params->num_phys; + phy_index++) { + if (params->phy[phy_index].read_status) + ext_phy_link_up &= + params->phy[phy_index].read_status( + ¶ms->phy[phy_index], + params, &temp_vars); + } + if (ext_phy_link_up) + return 0; + } + return -ESRCH; +} + +static u8 bnx2x_link_initialize(struct link_params *params, + struct link_vars *vars) +{ + u8 rc = 0; + u8 phy_index, non_ext_phy; + struct bnx2x *bp = params->bp; + /** + * In case of external phy existence, the line speed would be the + * line speed linked up by the external phy. In case it is direct + * only, then the line_speed during initialization will be + * equal to the req_line_speed + */ + vars->line_speed = params->phy[INT_PHY].req_line_speed; + + /** + * Initialize the internal phy in case this is a direct board + * (no external phys), or this board has external phy which requires + * to first. + */ + + if (params->phy[INT_PHY].config_init) + params->phy[INT_PHY].config_init( + ¶ms->phy[INT_PHY], + params, vars); + + /* init ext phy and enable link state int */ + non_ext_phy = (SINGLE_MEDIA_DIRECT(params) || + (params->loopback_mode == LOOPBACK_XGXS)); + + if (non_ext_phy || + (params->phy[EXT_PHY1].flags & FLAGS_INIT_XGXS_FIRST) || + (params->loopback_mode == LOOPBACK_EXT_PHY)) { + struct bnx2x_phy *phy = ¶ms->phy[INT_PHY]; + if (vars->line_speed == SPEED_AUTO_NEG) + bnx2x_set_parallel_detection(phy, params); + bnx2x_init_internal_phy(phy, params, vars); + } + + /* Init external phy*/ + if (!non_ext_phy) + for (phy_index = EXT_PHY1; phy_index < params->num_phys; + phy_index++) { + params->phy[phy_index].config_init( + ¶ms->phy[phy_index], + params, vars); + } + + /* Reset the interrupt indication after phy was initialized */ + bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + + params->port*4, + (NIG_STATUS_XGXS0_LINK10G | + NIG_STATUS_XGXS0_LINK_STATUS | + NIG_STATUS_SERDES0_LINK_STATUS | + NIG_MASK_MI_INT)); + return rc; +} + +static void bnx2x_int_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + /* reset the SerDes/XGXS */ + REG_WR(params->bp, GRCBASE_MISC + + MISC_REGISTERS_RESET_REG_3_CLEAR, + (0x1ff << (params->port*16))); +} + +static void bnx2x_common_ext_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u8 gpio_port; + /* HW reset */ + gpio_port = params->port; + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, + gpio_port); + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_LOW, + gpio_port); + DP(NETIF_MSG_LINK, "reset external PHY\n"); +} + +static u8 bnx2x_update_link_down(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 port = params->port; + + DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port); + bnx2x_set_led(params, LED_MODE_OFF, 0); + + /* indicate no mac active */ + vars->mac_type = MAC_TYPE_NONE; + + /* update shared memory */ + vars->link_status = 0; + vars->line_speed = 0; + bnx2x_update_mng(params, vars->link_status); + + /* activate nig drain */ + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + + /* disable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + + msleep(10); + + /* reset BigMac */ + bnx2x_bmac_rx_disable(bp, params->port); + REG_WR(bp, GRCBASE_MISC + + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + return 0; +} + +static u8 bnx2x_update_link_up(struct link_params *params, + struct link_vars *vars, + u8 link_10g) +{ + struct bnx2x *bp = params->bp; + u8 port = params->port; + u8 rc = 0; + + vars->link_status |= LINK_STATUS_LINK_UP; + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) + vars->link_status |= + LINK_STATUS_TX_FLOW_CONTROL_ENABLED; + + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) + vars->link_status |= + LINK_STATUS_RX_FLOW_CONTROL_ENABLED; + if (link_10g) { + bnx2x_bmac_enable(params, vars, 0); + bnx2x_set_led(params, LED_MODE_OPER, SPEED_10000); + } else { + rc = bnx2x_emac_program(params, vars); + + bnx2x_emac_enable(params, vars, 0); + + /* AN complete? */ + if ((vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) + && (!(vars->phy_flags & PHY_SGMII_FLAG)) && + SINGLE_MEDIA_DIRECT(params)) + bnx2x_set_gmii_tx_driver(params); + } + + /* PBF - link up */ + rc |= bnx2x_pbf_update(params, vars->flow_ctrl, + vars->line_speed); + + /* disable drain */ + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0); + + /* update shared memory */ + bnx2x_update_mng(params, vars->link_status); + msleep(20); + return rc; +} +/** + * The bnx2x_link_update function should be called upon link + * interrupt. + * Link is considered up as follows: + * - DIRECT_SINGLE_MEDIA - Only XGXS link (internal link) needs + * to be up + * - SINGLE_MEDIA - The link between the 577xx and the external + * phy (XGXS) need to up as well as the external link of the + * phy (PHY_EXT1) + * - DUAL_MEDIA - The link between the 577xx and the first + * external phy needs to be up, and at least one of the 2 + * external phy link must be up. + */ +u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + struct link_vars phy_vars[MAX_PHYS]; + u8 port = params->port; + u8 link_10g, phy_index; + u8 ext_phy_link_up = 0, cur_link_up, rc = 0; + u8 is_mi_int = 0; + u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed; + u8 active_external_phy = INT_PHY; + vars->link_status = 0; + for (phy_index = INT_PHY; phy_index < params->num_phys; + phy_index++) { + phy_vars[phy_index].flow_ctrl = 0; + phy_vars[phy_index].link_status = 0; + phy_vars[phy_index].line_speed = 0; + phy_vars[phy_index].duplex = DUPLEX_FULL; + phy_vars[phy_index].phy_link_up = 0; + phy_vars[phy_index].link_up = 0; + } + + DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n", + port, (vars->phy_flags & PHY_XGXS_FLAG), + REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); + + is_mi_int = (u8)(REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + + port*0x18) > 0); + DP(NETIF_MSG_LINK, "int_mask 0x%x MI_INT %x, SERDES_LINK %x\n", + REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), + is_mi_int, + REG_RD(bp, + NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c)); + + DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n", + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); + + /* disable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + + /** + * Step 1: + * Check external link change only for external phys, and apply + * priority selection between them in case the link on both phys + * is up. Note that the instead of the common vars, a temporary + * vars argument is used since each phy may have different link/ + * speed/duplex result + */ + for (phy_index = EXT_PHY1; phy_index < params->num_phys; + phy_index++) { + struct bnx2x_phy *phy = ¶ms->phy[phy_index]; + if (!phy->read_status) + continue; + /* Read link status and params of this ext phy */ + cur_link_up = phy->read_status(phy, params, + &phy_vars[phy_index]); + if (cur_link_up) { + DP(NETIF_MSG_LINK, "phy in index %d link is up\n", + phy_index); + } else { + DP(NETIF_MSG_LINK, "phy in index %d link is down\n", + phy_index); + continue; + } + + if (!ext_phy_link_up) { + ext_phy_link_up = 1; + active_external_phy = phy_index; + } + } + prev_line_speed = vars->line_speed; + /** + * Step 2: + * Read the status of the internal phy. In case of + * DIRECT_SINGLE_MEDIA board, this link is the external link, + * otherwise this is the link between the 577xx and the first + * external phy + */ + if (params->phy[INT_PHY].read_status) + params->phy[INT_PHY].read_status( + ¶ms->phy[INT_PHY], + params, vars); + /** + * The INT_PHY flow control reside in the vars. This include the + * case where the speed or flow control are not set to AUTO. + * Otherwise, the active external phy flow control result is set + * to the vars. The ext_phy_line_speed is needed to check if the + * speed is different between the internal phy and external phy. + * This case may be result of intermediate link speed change. + */ + if (active_external_phy > INT_PHY) { + vars->flow_ctrl = phy_vars[active_external_phy].flow_ctrl; + /** + * Link speed is taken from the XGXS. AN and FC result from + * the external phy. + */ + vars->link_status |= phy_vars[active_external_phy].link_status; + ext_phy_line_speed = phy_vars[active_external_phy].line_speed; + vars->duplex = phy_vars[active_external_phy].duplex; + if (params->phy[active_external_phy].supported & + SUPPORTED_FIBRE) + vars->link_status |= LINK_STATUS_SERDES_LINK; + DP(NETIF_MSG_LINK, "Active external phy selected: %x\n", + active_external_phy); + } + DP(NETIF_MSG_LINK, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x," + " ext_phy_line_speed = %d\n", vars->flow_ctrl, + vars->link_status, ext_phy_line_speed); + /** + * Upon link speed change set the NIG into drain mode. Comes to + * deals with possible FIFO glitch due to clk change when speed + * is decreased without link down indicator + */ + + if (vars->phy_link_up) { + if (!(SINGLE_MEDIA_DIRECT(params)) && ext_phy_link_up && + (ext_phy_line_speed != vars->line_speed)) { + DP(NETIF_MSG_LINK, "Internal link speed %d is" + " different than the external" + " link speed %d\n", vars->line_speed, + ext_phy_line_speed); + vars->phy_link_up = 0; + } else if (prev_line_speed != vars->line_speed) { + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + + params->port*4, 0); + msleep(1); + } + } + + /* anything 10 and over uses the bmac */ + link_10g = ((vars->line_speed == SPEED_10000) || + (vars->line_speed == SPEED_12000) || + (vars->line_speed == SPEED_12500) || + (vars->line_speed == SPEED_13000) || + (vars->line_speed == SPEED_15000) || + (vars->line_speed == SPEED_16000)); + + bnx2x_link_int_ack(params, vars, link_10g, is_mi_int); + + /** + * In case external phy link is up, and internal link is down + * (not initialized yet probably after link initialization, it + * needs to be initialized. + * Note that after link down-up as result of cable plug, the xgxs + * link would probably become up again without the need + * initialize it + */ + if (!(SINGLE_MEDIA_DIRECT(params))) { + DP(NETIF_MSG_LINK, "ext_phy_link_up = %d, int_link_up = %d," + " init_preceding = %d\n", ext_phy_link_up, + vars->phy_link_up, + params->phy[EXT_PHY1].flags & + FLAGS_INIT_XGXS_FIRST); + if (!(params->phy[EXT_PHY1].flags & + FLAGS_INIT_XGXS_FIRST) + && ext_phy_link_up && !vars->phy_link_up) { + vars->line_speed = ext_phy_line_speed; + if (vars->line_speed < SPEED_1000) + vars->phy_flags |= PHY_SGMII_FLAG; + else + vars->phy_flags &= ~PHY_SGMII_FLAG; + bnx2x_init_internal_phy(¶ms->phy[INT_PHY], + params, + vars); + } + } + /** + * Link is up only if both local phy and external phy (in case of + * non-direct board) are up + */ + vars->link_up = (vars->phy_link_up && + (ext_phy_link_up || + SINGLE_MEDIA_DIRECT(params))); + + if (vars->link_up) + rc = bnx2x_update_link_up(params, vars, link_10g); + else + rc = bnx2x_update_link_down(params, vars); + + return rc; +} + + /*****************************************************************************/ /* External Phy section */ /*****************************************************************************/ void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port) { bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW, port); + MISC_REGISTERS_GPIO_OUTPUT_LOW, port); msleep(1); bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, port); + MISC_REGISTERS_GPIO_OUTPUT_HIGH, port); } static void bnx2x_save_spirom_version(struct bnx2x *bp, u8 port, @@ -2094,59 +2967,211 @@ static void bnx2x_save_bcm_spirom_ver(struct bnx2x *bp, phy->ver_addr); } -static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy, - struct link_params *params) +static void bnx2x_ext_phy_set_pause(struct link_params *params, + struct bnx2x_phy *phy, + struct link_vars *vars) { - u16 val, fw_ver1, fw_ver2, cnt; + u16 val; struct bnx2x *bp = params->bp; + /* read modify write pause advertizing */ + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, &val); - /* For the 32 bits registers in 848xx, access via MDIO2ARM interface.*/ - /* (1) set register 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */ - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0014); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B, 0x0000); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C, 0x0300); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x0009); + val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH; - for (cnt = 0; cnt < 100; cnt++) { - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); - if (val & 1) - break; - udelay(5); + /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ + bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { + val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC; } - if (cnt == 100) { - DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(1)\n"); - bnx2x_save_spirom_version(bp, params->port, 0, - phy->ver_addr); + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { + val |= MDIO_AN_REG_ADV_PAUSE_PAUSE; + } + DP(NETIF_MSG_LINK, "Ext phy AN advertize 0x%x\n", val); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val); +} + +static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 ld_pause; /* local */ + u16 lp_pause; /* link partner */ + u16 pause_result; + u8 ret = 0; + /* read twice */ + + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + + if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) + vars->flow_ctrl = phy->req_flow_ctrl; + else if (phy->req_line_speed != SPEED_AUTO_NEG) + vars->flow_ctrl = params->req_fc_auto_adv; + else if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) { + ret = 1; + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_ADV_PAUSE, &ld_pause); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG, &lp_pause); + pause_result = (ld_pause & + MDIO_AN_REG_ADV_PAUSE_MASK) >> 8; + pause_result |= (lp_pause & + MDIO_AN_REG_ADV_PAUSE_MASK) >> 10; + DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n", + pause_result); + bnx2x_pause_resolve(vars, pause_result); + } + return ret; +} + +static void bnx2x_ext_phy_10G_an_resolve(struct bnx2x *bp, + struct bnx2x_phy *phy, + struct link_vars *vars) +{ + u16 val; + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_STATUS, &val); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_STATUS, &val); + if (val & (1<<5)) + vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; + if ((val & (1<<0)) == 0) + vars->link_status |= LINK_STATUS_PARALLEL_DETECTION_USED; +} + +/******************************************************************/ +/* common BCM8073/BCM8727 PHY SECTION */ +/******************************************************************/ +static void bnx2x_8073_resolve_fc(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + if (phy->req_line_speed == SPEED_10 || + phy->req_line_speed == SPEED_100) { + vars->flow_ctrl = phy->req_flow_ctrl; return; } + if (bnx2x_ext_phy_resolve_fc(phy, params, vars) && + (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE)) { + u16 pause_result; + u16 ld_pause; /* local */ + u16 lp_pause; /* link partner */ + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LD, &ld_pause); - /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */ - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A); - for (cnt = 0; cnt < 100; cnt++) { - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); - if (val & 1) - break; - udelay(5); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LP, &lp_pause); + pause_result = (ld_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5; + pause_result |= (lp_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7; + + bnx2x_pause_resolve(vars, pause_result); + DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x\n", + pause_result); } - if (cnt == 100) { - DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(2)\n"); - bnx2x_save_spirom_version(bp, params->port, 0, - phy->ver_addr); +} + +static void bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp, + struct bnx2x_phy *phy, + u8 port) +{ + /* Boot port from external ROM */ + /* EDC grst */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + 0x0001); + + /* ucode reboot and rst */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + 0x008c); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_MISC_CTRL1, 0x0001); + + /* Reset internal microprocessor */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); + + /* Release srst bit */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); + + /* wait for 120ms for code download via SPI port */ + msleep(120); + + /* Clear ser_boot_ctl bit */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_MISC_CTRL1, 0x0000); + bnx2x_save_bcm_spirom_ver(bp, phy, port); +} + +static void bnx2x_8073_set_xaui_low_power_mode(struct bnx2x *bp, + struct bnx2x_phy *phy) +{ + u16 val; + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, &val); + + if (val == 0) { + /* Mustn't set low power mode in 8073 A0 */ return; } - /* lower 16 bits of the register SPI_FW_STATUS */ - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1); - /* upper 16 bits of register SPI_FW_STATUS */ - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2); + /* Disable PLL sequencer (use read-modify-write to clear bit 13) */ + bnx2x_cl45_read(bp, phy, + MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, &val); + val &= ~(1<<13); + bnx2x_cl45_write(bp, phy, + MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val); - bnx2x_save_spirom_version(bp, params->port, (fw_ver2<<16) | fw_ver1, - phy->ver_addr); + /* PLL controls */ + bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805E, 0x1077); + bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805D, 0x0000); + bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805C, 0x030B); + bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805B, 0x1240); + bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805A, 0x2490); + + /* Tx Controls */ + bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A7, 0x0C74); + bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A6, 0x9041); + bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A5, 0x4640); + + /* Rx Controls */ + bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FE, 0x01C4); + bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FD, 0x9249); + bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FC, 0x2015); + + /* Enable PLL sequencer (use read-modify-write to set bit 13) */ + bnx2x_cl45_read(bp, phy, MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, &val); + val |= (1<<13); + bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val); } + +/******************************************************************/ +/* BCM8073 PHY SECTION */ +/******************************************************************/ static u8 bnx2x_8073_is_snr_needed(struct bnx2x *bp, struct bnx2x_phy *phy) { /* This is only required for 8073A1, version 102 only */ @@ -2172,6 +3197,7 @@ static u8 bnx2x_8073_is_snr_needed(struct bnx2x *bp, struct bnx2x_phy *phy) return 1; } + static u8 bnx2x_8073_xaui_wa(struct bnx2x *bp, struct bnx2x_phy *phy) { u16 val, cnt, cnt1 ; @@ -2225,87 +3251,374 @@ static u8 bnx2x_8073_xaui_wa(struct bnx2x *bp, struct bnx2x_phy *phy) return -EINVAL; } -static void bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp, - struct bnx2x_phy *phy, - u8 port) +static void bnx2x_807x_force_10G(struct bnx2x *bp, struct bnx2x_phy *phy) { - /* Boot port from external ROM */ - /* EDC grst */ + /* Force KR or KX */ bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - 0x0001); - - /* ucode reboot and rst */ + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040); bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - 0x008c); - + MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0x000b); bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0001); - - /* Reset internal microprocessor */ + MDIO_PMA_DEVAD, MDIO_PMA_REG_BCM_CTRL, 0x0000); bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x0000); +} - /* Release srst bit */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); +static void bnx2x_8073_set_pause_cl37(struct link_params *params, + struct bnx2x_phy *phy, + struct link_vars *vars) +{ + u16 cl37_val; + struct bnx2x *bp = params->bp; + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, &cl37_val); - /* wait for 120ms for code download via SPI port */ - msleep(120); + cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ + bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) { + cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC; + } + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { + cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + } + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { + cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + } + DP(NETIF_MSG_LINK, + "Ext phy AN advertize cl37 0x%x\n", cl37_val); - /* Clear ser_boot_ctl bit */ bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0000); - bnx2x_save_bcm_spirom_ver(bp, phy, port); + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, cl37_val); + msleep(500); } -static void bnx2x_8726_external_rom_boot(struct bnx2x_phy *phy, - struct link_params *params) +static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { struct bnx2x *bp = params->bp; - /* Need to wait 100ms after reset */ - msleep(100); + u16 val = 0, tmp1; + u8 gpio_port; + DP(NETIF_MSG_LINK, "Init 8073\n"); - /* Micro controller re-boot */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x018B); + gpio_port = params->port; + /* Restore normal power mode*/ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port); - /* Set soft reset */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port); + /* enable LASI */ bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0001); + MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL, (1<<2)); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0x0004); + + bnx2x_8073_set_pause_cl37(params, phy, vars); + + bnx2x_8073_set_xaui_low_power_mode(bp, phy); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &tmp1); + + DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1); + + /* Enable CL37 BAM */ + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8073_BAM, &val); bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, - MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); + MDIO_AN_DEVAD, + MDIO_AN_REG_8073_BAM, val | 1); - /* wait for 150ms for microcode load */ - msleep(150); + if (params->loopback_mode == LOOPBACK_EXT) { + bnx2x_807x_force_10G(bp, phy); + DP(NETIF_MSG_LINK, "Forced speed 10G on 807X\n"); + return 0; + } else { + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_BCM_CTRL, 0x0002); + } + if (phy->req_line_speed != SPEED_AUTO_NEG) { + if (phy->req_line_speed == SPEED_10000) { + val = (1<<7); + } else if (phy->req_line_speed == SPEED_2500) { + val = (1<<5); + /* Note that 2.5G works only + when used with 1G advertisment */ + } else + val = (1<<5); + } else { + val = 0; + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) + val |= (1<<7); + + /* Note that 2.5G works only when + used with 1G advertisment */ + if (phy->speed_cap_mask & + (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G | + PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) + val |= (1<<5); + DP(NETIF_MSG_LINK, "807x autoneg val = 0x%x\n", val); + } + + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, val); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_2_5G, &tmp1); + + if (((phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) && + (phy->req_line_speed == SPEED_AUTO_NEG)) || + (phy->req_line_speed == SPEED_2500)) { + u16 phy_ver; + /* Allow 2.5G for A1 and above */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, + &phy_ver); + DP(NETIF_MSG_LINK, "Add 2.5G\n"); + if (phy_ver > 0) + tmp1 |= 1; + else + tmp1 &= 0xfffe; + } else { + DP(NETIF_MSG_LINK, "Disable 2.5G\n"); + tmp1 &= 0xfffe; + } + + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_2_5G, tmp1); + /* Add support for CL37 (passive mode) II */ + + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, &tmp1); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, + (tmp1 | ((phy->req_duplex == DUPLEX_FULL) ? + 0x20 : 0x40))); + + /* Add support for CL37 (passive mode) III */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000); + + /* The SNR will improve about 2db by changing + BW and FEE main tap. Rest commands are executed + after link is up*/ + if (bnx2x_8073_is_snr_needed(bp, phy)) + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_EDC_FFE_MAIN, + 0xFB0C); + + /* Enable FEC (Forware Error Correction) Request in the AN */ + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV2, &tmp1); + tmp1 |= (1<<15); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV2, tmp1); + + bnx2x_ext_phy_set_pause(params, phy, vars); + + /* Restart autoneg */ + msleep(500); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200); + DP(NETIF_MSG_LINK, "807x Autoneg Restart: Advertise 1G=%x, 10G=%x\n", + ((val & (1<<5)) > 0), ((val & (1<<7)) > 0)); + return 0; +} + +static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 link_up = 0; + u16 val1, val2; + u16 link_status = 0; + u16 an1000_status = 0; + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1); + + DP(NETIF_MSG_LINK, "8703 LASI status 0x%x\n", val1); + + /* clear the interrupt LASI status register */ + bnx2x_cl45_read(bp, phy, + MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2); + bnx2x_cl45_read(bp, phy, + MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val1); + DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n", val2, val1); + /* Clear MSG-OUT */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1); + + /* Check the LASI */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &val2); + + DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2); + + /* Check the link status */ + bnx2x_cl45_read(bp, phy, + MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2); + DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); + link_up = ((val1 & 4) == 4); + DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1); + + if (link_up && + ((phy->req_line_speed != SPEED_10000))) { + if (bnx2x_8073_xaui_wa(bp, phy) != 0) + return 0; + } + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &an1000_status); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &an1000_status); + + /* Check the link status on 1.1.2 */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); + DP(NETIF_MSG_LINK, "KR PMA status 0x%x->0x%x," + "an_link_status=0x%x\n", val2, val1, an1000_status); + + link_up = (((val1 & 4) == 4) || (an1000_status & (1<<1))); + if (link_up && bnx2x_8073_is_snr_needed(bp, phy)) { + /* The SNR will improve about 2dbby + changing the BW and FEE main tap.*/ + /* The 1st write to change FFE main + tap is set before restart AN */ + /* Change PLL Bandwidth in EDC + register */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PLL_BANDWIDTH, + 0x26BC); + + /* Change CDR Bandwidth in EDC register */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CDR_BANDWIDTH, + 0x0333); + } + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_SPEED_LINK_STATUS, + &link_status); + + /* Bits 0..2 --> speed detected, bits 13..15--> link is down */ + if ((link_status & (1<<2)) && (!(link_status & (1<<15)))) { + link_up = 1; + vars->line_speed = SPEED_10000; + DP(NETIF_MSG_LINK, "port %x: External link up in 10G\n", + params->port); + } else if ((link_status & (1<<1)) && (!(link_status & (1<<14)))) { + link_up = 1; + vars->line_speed = SPEED_2500; + DP(NETIF_MSG_LINK, "port %x: External link up in 2.5G\n", + params->port); + } else if ((link_status & (1<<0)) && (!(link_status & (1<<13)))) { + link_up = 1; + vars->line_speed = SPEED_1000; + DP(NETIF_MSG_LINK, "port %x: External link up in 1G\n", + params->port); + } else { + link_up = 0; + DP(NETIF_MSG_LINK, "port %x: External link is down\n", + params->port); + } + + if (link_up) { + bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); + bnx2x_8073_resolve_fc(phy, params, vars); + } + return link_up; +} + +static void bnx2x_8073_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u8 gpio_port; + gpio_port = params->port; + DP(NETIF_MSG_LINK, "Setting 8073 port %d into low power mode\n", + gpio_port); + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_LOW, + gpio_port); +} + +/******************************************************************/ +/* BCM8705 PHY SECTION */ +/******************************************************************/ +static u8 bnx2x_8705_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "init 8705\n"); + /* Restore normal power mode*/ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); + /* HW reset */ + bnx2x_ext_phy_hw_reset(bp, params->port); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040); + bnx2x_wait_reset_complete(bp, phy); - /* Disable serial boot control, tristates pins SS_N, SCK, MOSI, MISO */ bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_MISC_CTRL1, 0x0000); + MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL, 0x8288); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, 0x7fbf); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CMU_PLL_BYPASS, 0x0100); + bnx2x_cl45_write(bp, phy, + MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_CNTL, 0x1); + /* BCM8705 doesn't have microcode, hence the 0 */ + bnx2x_save_spirom_version(bp, params->port, params->shmem_base, 0); + return 0; +} - msleep(200); - bnx2x_save_bcm_spirom_ver(bp, phy, params->port); +static u8 bnx2x_8705_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + u8 link_up = 0; + u16 val1, rx_sd; + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "read status 8705\n"); + bnx2x_cl45_read(bp, phy, + MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); + + bnx2x_cl45_read(bp, phy, + MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, 0xc809, &val1); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, 0xc809, &val1); + + DP(NETIF_MSG_LINK, "8705 1.c809 val=0x%x\n", val1); + link_up = ((rx_sd & 0x1) && (val1 & (1<<9)) && ((val1 & (1<<8)) == 0)); + if (link_up) { + vars->line_speed = SPEED_10000; + bnx2x_ext_phy_resolve_fc(phy, params, vars); + } + return link_up; } +/******************************************************************/ +/* SFP+ module Section */ +/******************************************************************/ static void bnx2x_sfp_set_transmitter(struct bnx2x *bp, struct bnx2x_phy *phy, u8 port, @@ -2392,7 +3705,7 @@ static u8 bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE) - return 0; + return 0;; msleep(1); } return -EINVAL; @@ -2637,6 +3950,64 @@ static u8 bnx2x_verify_sfp_module(struct bnx2x_phy *phy, return -EINVAL; } +static u8 bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, + struct link_params *params) + +{ + u8 val; + struct bnx2x *bp = params->bp; + u16 timeout; + /* Initialization time after hot-plug may take up to 300ms for some + phys type ( e.g. JDSU ) */ + for (timeout = 0; timeout < 60; timeout++) { + if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val) + == 0) { + DP(NETIF_MSG_LINK, "SFP+ module initialization " + "took %d ms\n", timeout * 5); + return 0; + } + msleep(5); + } + return -EINVAL; +} + +static void bnx2x_8727_power_module(struct bnx2x *bp, + struct bnx2x_phy *phy, + u8 is_power_up) { + /* Make sure GPIOs are not using for LED mode */ + u16 val; + /* + * In the GPIO register, bit 4 is use to detemine if the GPIOs are + * operating as INPUT or as OUTPUT. Bit 1 is for input, and 0 for + * output + * Bits 0-1 determine the gpios value for OUTPUT in case bit 4 val is 0 + * Bits 8-9 determine the gpios value for INPUT in case bit 4 val is 1 + * where the 1st bit is the over-current(only input), and 2nd bit is + * for power( only output ) + */ + + /* + * In case of NOC feature is disabled and power is up, set GPIO control + * as input to enable listening of over-current indication + */ + if (phy->flags & FLAGS_NOC) + return; + if (!(phy->flags & + FLAGS_NOC) && is_power_up) + val = (1<<4); + else + /* + * Set GPIO control to OUTPUT, and set the power bit + * to according to the is_power_up + */ + val = ((!(is_power_up)) << 1); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_GPIO_CTRL, + val); +} + static u8 bnx2x_8726_set_limiting_mode(struct bnx2x *bp, struct bnx2x_phy *phy, u16 edc_mode) @@ -2721,65 +4092,6 @@ static u8 bnx2x_8727_set_limiting_mode(struct bnx2x *bp, return 0; } - -static u8 bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, - struct link_params *params) - -{ - u8 val; - struct bnx2x *bp = params->bp; - u16 timeout; - /* Initialization time after hot-plug may take up to 300ms for some - phys type ( e.g. JDSU ) */ - for (timeout = 0; timeout < 60; timeout++) { - if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val) - == 0) { - DP(NETIF_MSG_LINK, "SFP+ module initialization " - "took %d ms\n", timeout * 5); - return 0; - } - msleep(5); - } - return -EINVAL; -} - -static void bnx2x_8727_power_module(struct bnx2x *bp, - struct bnx2x_phy *phy, - u8 is_power_up) { - /* Make sure GPIOs are not using for LED mode */ - u16 val; - /* - * In the GPIO register, bit 4 is use to detemine if the GPIOs are - * operating as INPUT or as OUTPUT. Bit 1 is for input, and 0 for - * output - * Bits 0-1 determine the gpios value for OUTPUT in case bit 4 val is 0 - * Bits 8-9 determine the gpios value for INPUT in case bit 4 val is 1 - * where the 1st bit is the over-current(only input), and 2nd bit is - * for power( only output ) - */ - - /* - * In case of NOC feature is disabled and power is up, set GPIO control - * as input to enable listening of over-current indication - */ - if (phy->flags & FLAGS_NOC) - return; - if (!(phy->flags & - FLAGS_NOC) && is_power_up) - val = (1<<4); - else - /* - * Set GPIO control to OUTPUT, and set the power bit - * to according to the is_power_up - */ - val = ((!(is_power_up)) << 1); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_GPIO_CTRL, - val); -} - static u8 bnx2x_sfp_module_detection(struct bnx2x_phy *phy, struct link_params *params) { @@ -2889,276 +4201,56 @@ void bnx2x_handle_module_detect_int(struct link_params *params) } } -static void bnx2x_807x_force_10G(struct bnx2x *bp, struct bnx2x_phy *phy) -{ - /* Force KR or KX */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0x000b); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_BCM_CTRL, 0x0000); - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x0000); -} - -static void bnx2x_8073_set_xaui_low_power_mode(struct bnx2x *bp, - struct bnx2x_phy *phy) -{ - u16 val; - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, &val); - - if (val == 0) { - /* Mustn't set low power mode in 8073 A0 */ - return; - } - - /* Disable PLL sequencer (use read-modify-write to clear bit 13) */ - bnx2x_cl45_read(bp, phy, - MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, &val); - val &= ~(1<<13); - bnx2x_cl45_write(bp, phy, - MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val); - - /* PLL controls */ - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805E, 0x1077); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805D, 0x0000); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805C, 0x030B); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805B, 0x1240); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805A, 0x2490); - - /* Tx Controls */ - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A7, 0x0C74); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A6, 0x9041); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A5, 0x4640); - - /* Rx Controls */ - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FE, 0x01C4); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FD, 0x9249); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FC, 0x2015); - - /* Enable PLL sequencer (use read-modify-write to set bit 13) */ - bnx2x_cl45_read(bp, phy, MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, &val); - val |= (1<<13); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val); -} - -static void bnx2x_8073_set_pause_cl37(struct link_params *params, - struct bnx2x_phy *phy, +/******************************************************************/ +/* common BCM8706/BCM8726 PHY SECTION */ +/******************************************************************/ +static u8 bnx2x_8706_8726_read_status(struct bnx2x_phy *phy, + struct link_params *params, struct link_vars *vars) { - u16 cl37_val; + u8 link_up = 0; + u16 val1, val2, rx_sd, pcs_status; struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "XGXS 8706/8726\n"); + /* Clear RX Alarm*/ bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, &cl37_val); - - cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ - bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) { - cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC; - } - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { - cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - } - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { - cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - } - DP(NETIF_MSG_LINK, - "Ext phy AN advertize cl37 0x%x\n", cl37_val); - - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, cl37_val); - msleep(500); -} - -static void bnx2x_ext_phy_set_pause(struct link_params *params, - struct bnx2x_phy *phy, - struct link_vars *vars) -{ - u16 val; - struct bnx2x *bp = params->bp; - /* read modify write pause advertizing */ - bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, &val); - - val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH; - - /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ - bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { - val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC; - } - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { - val |= MDIO_AN_REG_ADV_PAUSE_PAUSE; - } - DP(NETIF_MSG_LINK, "Ext phy AN advertize 0x%x\n", val); - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val); -} - -static void bnx2x_set_preemphasis(struct bnx2x_phy *phy, - struct link_params *params) -{ - - u16 bank, i = 0; - struct bnx2x *bp = params->bp; - - for (bank = MDIO_REG_BANK_RX0, i = 0; bank <= MDIO_REG_BANK_RX3; - bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0), i++) { - CL45_WR_OVER_CL22(bp, phy, - bank, - MDIO_RX0_RX_EQ_BOOST, - phy->rx_preemphasis[i]); - } - - for (bank = MDIO_REG_BANK_TX0, i = 0; bank <= MDIO_REG_BANK_TX3; - bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0), i++) { - CL45_WR_OVER_CL22(bp, phy, - bank, - MDIO_TX0_TX_DRIVER, - phy->tx_preemphasis[i]); - } -} - -static void bnx2x_848xx_set_led(struct bnx2x *bp, - struct bnx2x_phy *phy) -{ - u16 val; - - /* PHYC_CTL_LED_CTL */ + MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &val2); + /* clear LASI indication*/ bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, &val); - val &= 0xFE00; - val |= 0x0092; - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL, val); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK, - 0x80); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED2_MASK, - 0x18); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED3_MASK, - 0x0040); - - /* 'Interrupt Mask' */ - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, - 0xFFFB, 0xFFFD); -} - -static void bnx2x_init_internal_phy(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u8 enable_cl73 = (SINGLE_MEDIA_DIRECT(params) || - (params->loopback_mode == LOOPBACK_XGXS_10)); - if (!(vars->phy_flags & PHY_SGMII_FLAG)) { - if (SINGLE_MEDIA_DIRECT(params) && - (params->feature_config_flags & - FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) - bnx2x_set_preemphasis(phy, params); - - /* forced speed requested? */ - if (vars->line_speed != SPEED_AUTO_NEG || - (SINGLE_MEDIA_DIRECT(params) && - params->loopback_mode == LOOPBACK_EXT)) { - DP(NETIF_MSG_LINK, "not SGMII, no AN\n"); - - /* disable autoneg */ - bnx2x_set_autoneg(phy, params, vars, 0); - - /* program speed and duplex */ - bnx2x_program_serdes(phy, params, vars); - - } else { /* AN_mode */ - DP(NETIF_MSG_LINK, "not SGMII, AN\n"); - - /* AN enabled */ - bnx2x_set_brcm_cl37_advertisment(phy, params); - - /* program duplex & pause advertisement (for aneg) */ - bnx2x_set_ieee_aneg_advertisment(phy, params, - vars->ieee_fc); - - /* enable autoneg */ - bnx2x_set_autoneg(phy, params, vars, enable_cl73); - - /* enable and restart AN */ - bnx2x_restart_autoneg(phy, params, enable_cl73); - } - - } else { /* SGMII mode */ - DP(NETIF_MSG_LINK, "SGMII\n"); + MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val2); + DP(NETIF_MSG_LINK, "8706/8726 LASI status 0x%x--> 0x%x\n", val1, val2); - bnx2x_initialize_sgmii_process(phy, params, vars); - } -} + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd); + bnx2x_cl45_read(bp, phy, + MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &pcs_status); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2); -static u16 bnx2x_wait_reset_complete(struct bnx2x *bp, - struct bnx2x_phy *phy) -{ - u16 cnt, ctrl; - /* Wait for soft reset to get cleared upto 1 sec */ - for (cnt = 0; cnt < 1000; cnt++) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, &ctrl); - if (!(ctrl & (1<<15))) - break; - msleep(1); + DP(NETIF_MSG_LINK, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps" + " link_status 0x%x\n", rx_sd, pcs_status, val2); + /* link is up if both bit 0 of pmd_rx_sd and + * bit 0 of pcs_status are set, or if the autoneg bit + * 1 is set + */ + link_up = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1))); + if (link_up) { + if (val2 & (1<<1)) + vars->line_speed = SPEED_1000; + else + vars->line_speed = SPEED_10000; + bnx2x_ext_phy_resolve_fc(phy, params, vars); } - DP(NETIF_MSG_LINK, "control reg 0x%x (after %d ms)\n", ctrl, cnt); - return cnt; -} - -static u8 bnx2x_8705_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "init 8705\n"); - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); - /* HW reset */ - bnx2x_ext_phy_hw_reset(bp, params->port); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040); - bnx2x_wait_reset_complete(bp, phy); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL, 0x8288); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, 0x7fbf); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CMU_PLL_BYPASS, 0x0100); - bnx2x_cl45_write(bp, phy, - MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_CNTL, 0x1); - /* BCM8705 doesn't have microcode, hence the 0 */ - bnx2x_save_spirom_version(bp, params->port, params->shmem_base, 0); - return 0; + return link_up; } +/******************************************************************/ +/* BCM8706 PHY SECTION */ +/******************************************************************/ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) @@ -3240,6 +4332,83 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy, return 0; } +static u8 bnx2x_8706_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + return bnx2x_8706_8726_read_status(phy, params, vars); +} + +/******************************************************************/ +/* BCM8726 PHY SECTION */ +/******************************************************************/ +static void bnx2x_8726_config_loopback(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "PMA/PMD ext_phy_loopback: 8726\n"); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0001); +} + +static void bnx2x_8726_external_rom_boot(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + /* Need to wait 100ms after reset */ + msleep(100); + + /* Micro controller re-boot */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x018B); + + /* Set soft reset */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_MISC_CTRL1, 0x0001); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); + + /* wait for 150ms for microcode load */ + msleep(150); + + /* Disable serial boot control, tristates pins SS_N, SCK, MOSI, MISO */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_MISC_CTRL1, 0x0000); + + msleep(200); + bnx2x_save_bcm_spirom_ver(bp, phy, params->port); +} + +static u8 bnx2x_8726_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 val1; + u8 link_up = bnx2x_8706_8726_read_status(phy, params, vars); + if (link_up) { + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, + &val1); + if (val1 & (1<<15)) { + DP(NETIF_MSG_LINK, "Tx is disabled\n"); + link_up = 0; + vars->line_speed = 0; + } + } + return link_up; +} + + static u8 bnx2x_8726_config_init(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) @@ -3356,136 +4525,35 @@ static u8 bnx2x_8726_config_init(struct bnx2x_phy *phy, } -static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) +static void bnx2x_8726_link_reset(struct bnx2x_phy *phy, + struct link_params *params) { struct bnx2x *bp = params->bp; - u16 val = 0, tmp1; - u8 gpio_port; - DP(NETIF_MSG_LINK, "Init 8073\n"); - - gpio_port = params->port; - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port); - - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port); - - /* enable LASI */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL, (1<<2)); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0x0004); - - bnx2x_8073_set_pause_cl37(params, phy, vars); - - bnx2x_8073_set_xaui_low_power_mode(bp, phy); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &tmp1); - - DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1); - - /* Enable CL37 BAM */ - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8073_BAM, &val); + DP(NETIF_MSG_LINK, "bnx2x_8726_link_reset port %d\n", params->port); + /* Set serial boot control for external load */ bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8073_BAM, val | 1); - - if (params->loopback_mode == LOOPBACK_EXT) { - bnx2x_807x_force_10G(bp, phy); - DP(NETIF_MSG_LINK, "Forced speed 10G on 807X\n"); - return 0; - } else { - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_BCM_CTRL, 0x0002); - } - if (phy->req_line_speed != SPEED_AUTO_NEG) { - if (phy->req_line_speed == SPEED_10000) { - val = (1<<7); - } else if (phy->req_line_speed == SPEED_2500) { - val = (1<<5); - /* Note that 2.5G works only - when used with 1G advertisment */ - } else - val = (1<<5); - } else { - val = 0; - if (phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) - val |= (1<<7); - - /* Note that 2.5G works only when - used with 1G advertisment */ - if (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G | - PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) - val |= (1<<5); - DP(NETIF_MSG_LINK, "807x autoneg val = 0x%x\n", val); - } - - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, val); - bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_2_5G, &tmp1); - - if (((phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) && - (phy->req_line_speed == SPEED_AUTO_NEG)) || - (phy->req_line_speed == SPEED_2500)) { - u16 phy_ver; - /* Allow 2.5G for A1 and above */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, - &phy_ver); - DP(NETIF_MSG_LINK, "Add 2.5G\n"); - if (phy_ver > 0) - tmp1 |= 1; - else - tmp1 &= 0xfffe; - } else { - DP(NETIF_MSG_LINK, "Disable 2.5G\n"); - tmp1 &= 0xfffe; - } - - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_2_5G, tmp1); - /* Add support for CL37 (passive mode) II */ - - bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, &tmp1); - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, - (tmp1 | ((phy->req_duplex == DUPLEX_FULL) ? - 0x20 : 0x40))); - - /* Add support for CL37 (passive mode) III */ - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000); - - /* The SNR will improve about 2db by changing - BW and FEE main tap. Rest commands are executed - after link is up*/ - if (bnx2x_8073_is_snr_needed(bp, phy)) - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_EDC_FFE_MAIN, - 0xFB0C); - - /* Enable FEC (Forware Error Correction) Request in the AN */ - bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV2, &tmp1); - tmp1 |= (1<<15); - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV2, tmp1); - - bnx2x_ext_phy_set_pause(params, phy, vars); - - /* Restart autoneg */ - msleep(500); - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200); - DP(NETIF_MSG_LINK, "807x Autoneg Restart: Advertise 1G=%x, 10G=%x\n", - ((val & (1<<5)) > 0), ((val & (1<<7)) > 0)); - return 0; + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, 0x0001); } +/******************************************************************/ +/* BCM8727 PHY SECTION */ +/******************************************************************/ +static void bnx2x_8727_hw_reset(struct bnx2x_phy *phy, + struct link_params *params) { + u32 swap_val, swap_override; + u8 port; + /** + * The PHY reset is controlled by GPIO 1. Fake the port number + * to cancel the swap done in set_gpio() + */ + struct bnx2x *bp = params->bp; + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + port = (swap_val && swap_override) ^ 1; + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, port); +} static u8 bnx2x_8727_config_init(struct bnx2x_phy *phy, struct link_params *params, @@ -3586,7 +4654,6 @@ static u8 bnx2x_8727_config_init(struct bnx2x_phy *phy, 0x0008); } - /* Set 2-wire transfer rate of SFP+ module EEPROM * to 100Khz since some DACs(direct attached cables) do * not work at 400Khz. @@ -3613,225 +4680,6 @@ static u8 bnx2x_8727_config_init(struct bnx2x_phy *phy, return 0; } -static u8 bnx2x_7101_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - u16 fw_ver1, fw_ver2, val; - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "Setting the SFX7101 LASI indication\n"); - - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); - /* HW reset */ - bnx2x_ext_phy_hw_reset(bp, params->port); - bnx2x_wait_reset_complete(bp, phy); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0x1); - DP(NETIF_MSG_LINK, "Setting the SFX7101 LED to blink on traffic\n"); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LED_CNTL, (1<<3)); - - bnx2x_ext_phy_set_pause(params, phy, vars); - /* Restart autoneg */ - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, &val); - val |= 0x200; - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, val); - - /* Save spirom version */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER1, &fw_ver1); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER2, &fw_ver2); - bnx2x_save_spirom_version(bp, params->port, - (u32)(fw_ver1<<16 | fw_ver2), phy->ver_addr); - return 0; -} - -static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 autoneg_val, an_1000_val, an_10_100_val; - bnx2x_wait_reset_complete(bp, phy); - bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4, - 1 << NIG_LATCH_BC_ENABLE_MI_INT); - - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0000); - bnx2x_848xx_set_led(bp, phy); - /* set 1000 speed advertisement */ - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, - &an_1000_val); - - bnx2x_ext_phy_set_pause(params, phy, vars); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_AN_ADV, - &an_10_100_val); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_MII_CTRL, - &autoneg_val); - /* Disable forced speed */ - autoneg_val &= ~((1<<6) | (1<<8) | (1<<9) | (1<<12) | (1<<13)); - an_10_100_val &= ~((1<<5) | (1<<6) | (1<<7) | (1<<8)); - - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || - (phy->req_line_speed == SPEED_1000)) { - an_1000_val |= (1<<8); - autoneg_val |= (1<<9 | 1<<12); - if (phy->req_duplex == DUPLEX_FULL) - an_1000_val |= (1<<9); - DP(NETIF_MSG_LINK, "Advertising 1G\n"); - } else - an_1000_val &= ~((1<<8) | (1<<9)); - - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, - an_1000_val); - - /* set 10 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)))) { - an_10_100_val |= (1<<7); - /* Enable autoneg and restart autoneg for legacy speeds */ - autoneg_val |= (1<<9 | 1<<12); - - if (phy->req_duplex == DUPLEX_FULL) - an_10_100_val |= (1<<8); - DP(NETIF_MSG_LINK, "Advertising 100M\n"); - } - /* set 10 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)))) { - an_10_100_val |= (1<<5); - autoneg_val |= (1<<9 | 1<<12); - if (phy->req_duplex == DUPLEX_FULL) - an_10_100_val |= (1<<6); - DP(NETIF_MSG_LINK, "Advertising 10M\n"); - } - - /* Only 10/100 are allowed to work in FORCE mode */ - if (phy->req_line_speed == SPEED_100) { - autoneg_val |= (1<<13); - /* Enabled AUTO-MDIX when autoneg is disabled */ - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL, - (1<<15 | 1<<9 | 7<<0)); - DP(NETIF_MSG_LINK, "Setting 100M force\n"); - } - if (phy->req_line_speed == SPEED_10) { - /* Enabled AUTO-MDIX when autoneg is disabled */ - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL, - (1<<15 | 1<<9 | 7<<0)); - DP(NETIF_MSG_LINK, "Setting 10M force\n"); - } - - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_AN_ADV, - an_10_100_val); - - if (phy->req_duplex == DUPLEX_FULL) - autoneg_val |= (1<<8); - - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_LEGACY_MII_CTRL, autoneg_val); - - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || - (phy->req_line_speed == SPEED_10000)) { - DP(NETIF_MSG_LINK, "Advertising 10G\n"); - /* Restart autoneg for 10G*/ - - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, - 0x3200); - } else if (phy->req_line_speed != SPEED_10 && - phy->req_line_speed != SPEED_100) { - bnx2x_cl45_write(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_8481_10GBASE_T_AN_CTRL, - 1); - } - /* Save spirom version */ - bnx2x_save_848xx_spirom_version(phy, params); - - return 0; -} - -static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 temp; - msleep(1); - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, - params->port); - msleep(200); /* 100 is not enough */ - - /** - * BCM84823 requires that XGXS links up first @ 10G for normal - * behavior - */ - temp = vars->line_speed; - vars->line_speed = SPEED_10000; - bnx2x_set_autoneg(phy, params, vars, 0); - bnx2x_program_serdes(phy, params, vars); - vars->line_speed = temp; - return bnx2x_848xx_cmn_config_init(phy, params, vars); -} - -static u8 bnx2x_8481_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); - - /* HW reset */ - bnx2x_ext_phy_hw_reset(bp, params->port); - - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); - return bnx2x_848xx_cmn_config_init(phy, params, vars); -} - - -static void bnx2x_ext_phy_10G_an_resolve(struct bnx2x *bp, - struct bnx2x_phy *phy, - struct link_vars *vars) -{ - u16 val; - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_STATUS, &val); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_STATUS, &val); - if (val & (1<<5)) - vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; - if ((val & (1<<0)) == 0) - vars->link_status |= LINK_STATUS_PARALLEL_DETECTION_USED; -} static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy, struct link_params *params) { @@ -3910,110 +4758,6 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy, module plugged in/out */ } - -static u8 bnx2x_8705_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - u8 link_up = 0; - u16 val1, rx_sd; - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "read status 8705\n"); - bnx2x_cl45_read(bp, phy, - MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); - - bnx2x_cl45_read(bp, phy, - MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, 0xc809, &val1); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, 0xc809, &val1); - - DP(NETIF_MSG_LINK, "8705 1.c809 val=0x%x\n", val1); - link_up = ((rx_sd & 0x1) && (val1 & (1<<9)) && ((val1 & (1<<8)) == 0)); - if (link_up) { - vars->line_speed = SPEED_10000; - bnx2x_ext_phy_resolve_fc(phy, params, vars); - } - return link_up; -} - -static u8 bnx2x_8706_8726_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - u8 link_up = 0; - u16 val1, val2, rx_sd, pcs_status; - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "XGXS 8706/8726\n"); - /* Clear RX Alarm*/ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &val2); - /* clear LASI indication*/ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val2); - DP(NETIF_MSG_LINK, "8706/8726 LASI status 0x%x--> 0x%x\n", val1, val2); - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd); - bnx2x_cl45_read(bp, phy, - MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &pcs_status); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2); - - DP(NETIF_MSG_LINK, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps" - " link_status 0x%x\n", rx_sd, pcs_status, val2); - /* link is up if both bit 0 of pmd_rx_sd and - * bit 0 of pcs_status are set, or if the autoneg bit - * 1 is set - */ - link_up = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1))); - if (link_up) { - if (val2 & (1<<1)) - vars->line_speed = SPEED_1000; - else - vars->line_speed = SPEED_10000; - bnx2x_ext_phy_resolve_fc(phy, params, vars); - } - return link_up; -} -static u8 bnx2x_8706_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - return bnx2x_8706_8726_read_status(phy, params, vars); -} - -static u8 bnx2x_8726_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 val1; - u8 link_up = bnx2x_8706_8726_read_status(phy, params, vars); - if (link_up) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, - &val1); - if (val1 & (1<<15)) { - DP(NETIF_MSG_LINK, "Tx is disabled\n"); - link_up = 0; - vars->line_speed = 0; - } - } - return link_up; -} - static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) @@ -4126,184 +4870,275 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, return link_up; } -static void bnx2x_8073_resolve_fc(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) +static void bnx2x_8727_link_reset(struct bnx2x_phy *phy, + struct link_params *params) { struct bnx2x *bp = params->bp; - if (phy->req_line_speed == SPEED_10 || - phy->req_line_speed == SPEED_100) { - vars->flow_ctrl = phy->req_flow_ctrl; + /* Disable Transmitter */ + bnx2x_sfp_set_transmitter(bp, phy, params->port, 0); +} + +/******************************************************************/ +/* BCM8481/BCM84823/BCM84833 PHY SECTION */ +/******************************************************************/ +static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy, + struct link_params *params) +{ + u16 val, fw_ver1, fw_ver2, cnt; + struct bnx2x *bp = params->bp; + + /* For the 32 bits registers in 848xx, access via MDIO2ARM interface.*/ + /* (1) set register 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */ + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0014); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B, 0x0000); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C, 0x0300); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x0009); + + for (cnt = 0; cnt < 100; cnt++) { + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); + if (val & 1) + break; + udelay(5); + } + if (cnt == 100) { + DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(1)\n"); + bnx2x_save_spirom_version(bp, params->port, 0, + phy->ver_addr); return; } - if (bnx2x_ext_phy_resolve_fc(phy, params, vars) && - (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE)) { - u16 pause_result; - u16 ld_pause; /* local */ - u16 lp_pause; /* link partner */ - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_FC_LD, &ld_pause); - - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_CL37_FC_LP, &lp_pause); - pause_result = (ld_pause & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5; - pause_result |= (lp_pause & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7; - bnx2x_pause_resolve(vars, pause_result); - DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x\n", - pause_result); + /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */ + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A); + for (cnt = 0; cnt < 100; cnt++) { + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); + if (val & 1) + break; + udelay(5); + } + if (cnt == 100) { + DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(2)\n"); + bnx2x_save_spirom_version(bp, params->port, 0, + phy->ver_addr); + return; } + + /* lower 16 bits of the register SPI_FW_STATUS */ + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1); + /* upper 16 bits of register SPI_FW_STATUS */ + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2); + + bnx2x_save_spirom_version(bp, params->port, (fw_ver2<<16) | fw_ver1, + phy->ver_addr); } -static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) + +static void bnx2x_848xx_set_led(struct bnx2x *bp, + struct bnx2x_phy *phy) { - struct bnx2x *bp = params->bp; - u8 link_up = 0; - u16 val1, val2; - u16 link_status = 0; - u16 an1000_status = 0; + u16 val; + /* PHYC_CTL_LED_CTL */ bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1); + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, &val); + val &= 0xFE00; + val |= 0x0092; - DP(NETIF_MSG_LINK, "8703 LASI status 0x%x\n", val1); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, val); - /* clear the interrupt LASI status register */ - bnx2x_cl45_read(bp, phy, - MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2); - bnx2x_cl45_read(bp, phy, - MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val1); - DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n", val2, val1); - /* Clear MSG-OUT */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, + 0x80); - /* Check the LASI */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &val2); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, + 0x18); - DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, + 0x0040); - /* Check the link status */ - bnx2x_cl45_read(bp, phy, - MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2); - DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2); + /* 'Interrupt Mask' */ + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, + 0xFFFB, 0xFFFD); +} - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); - link_up = ((val1 & 4) == 4); - DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1); +static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 autoneg_val, an_1000_val, an_10_100_val; + /** + * This phy uses the NIG latch mechanism since link indication + * arrives through its LED4 and not via its LASI signal, so we + * get steady signal instead of clear on read + */ + bnx2x_wait_reset_complete(bp, phy); + bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4, + 1 << NIG_LATCH_BC_ENABLE_MI_INT); - if (link_up && - ((phy->req_line_speed != SPEED_10000))) { - if (bnx2x_8073_xaui_wa(bp, phy) != 0) - return 0; - } - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &an1000_status); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0000); + + bnx2x_848xx_set_led(bp, phy); + + /* set 1000 speed advertisement */ bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &an1000_status); + MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, + &an_1000_val); - /* Check the link status on 1.1.2 */ + bnx2x_ext_phy_set_pause(params, phy, vars); bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_AN_ADV, + &an_10_100_val); bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); - DP(NETIF_MSG_LINK, "KR PMA status 0x%x->0x%x," - "an_link_status=0x%x\n", val2, val1, an1000_status); + MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_MII_CTRL, + &autoneg_val); + /* Disable forced speed */ + autoneg_val &= ~((1<<6) | (1<<8) | (1<<9) | (1<<12) | (1<<13)); + an_10_100_val &= ~((1<<5) | (1<<6) | (1<<7) | (1<<8)); - link_up = (((val1 & 4) == 4) || (an1000_status & (1<<1))); - if (link_up && bnx2x_8073_is_snr_needed(bp, phy)) { - /* The SNR will improve about 2dbby - changing the BW and FEE main tap.*/ - /* The 1st write to change FFE main - tap is set before restart AN */ - /* Change PLL Bandwidth in EDC - register */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_PLL_BANDWIDTH, - 0x26BC); + if (((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (phy->req_line_speed == SPEED_1000)) { + an_1000_val |= (1<<8); + autoneg_val |= (1<<9 | 1<<12); + if (phy->req_duplex == DUPLEX_FULL) + an_1000_val |= (1<<9); + DP(NETIF_MSG_LINK, "Advertising 1G\n"); + } else + an_1000_val &= ~((1<<8) | (1<<9)); - /* Change CDR Bandwidth in EDC register */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CDR_BANDWIDTH, - 0x0333); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, + an_1000_val); + + /* set 10 speed advertisement */ + if (((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)))) { + an_10_100_val |= (1<<7); + /* Enable autoneg and restart autoneg for legacy speeds */ + autoneg_val |= (1<<9 | 1<<12); + + if (phy->req_duplex == DUPLEX_FULL) + an_10_100_val |= (1<<8); + DP(NETIF_MSG_LINK, "Advertising 100M\n"); + } + /* set 10 speed advertisement */ + if (((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)))) { + an_10_100_val |= (1<<5); + autoneg_val |= (1<<9 | 1<<12); + if (phy->req_duplex == DUPLEX_FULL) + an_10_100_val |= (1<<6); + DP(NETIF_MSG_LINK, "Advertising 10M\n"); } - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_SPEED_LINK_STATUS, - &link_status); - /* Bits 0..2 --> speed detected, bits 13..15--> link is down */ - if ((link_status & (1<<2)) && (!(link_status & (1<<15)))) { - link_up = 1; - vars->line_speed = SPEED_10000; - DP(NETIF_MSG_LINK, "port %x: External link up in 10G\n", - params->port); - } else if ((link_status & (1<<1)) && (!(link_status & (1<<14)))) { - link_up = 1; - vars->line_speed = SPEED_2500; - DP(NETIF_MSG_LINK, "port %x: External link up in 2.5G\n", - params->port); - } else if ((link_status & (1<<0)) && (!(link_status & (1<<13)))) { - link_up = 1; - vars->line_speed = SPEED_1000; - DP(NETIF_MSG_LINK, "port %x: External link up in 1G\n", - params->port); - } else { - link_up = 0; - DP(NETIF_MSG_LINK, "port %x: External link is down\n", - params->port); + /* Only 10/100 are allowed to work in FORCE mode */ + if (phy->req_line_speed == SPEED_100) { + autoneg_val |= (1<<13); + /* Enabled AUTO-MDIX when autoneg is disabled */ + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL, + (1<<15 | 1<<9 | 7<<0)); + DP(NETIF_MSG_LINK, "Setting 100M force\n"); + } + if (phy->req_line_speed == SPEED_10) { + /* Enabled AUTO-MDIX when autoneg is disabled */ + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL, + (1<<15 | 1<<9 | 7<<0)); + DP(NETIF_MSG_LINK, "Setting 10M force\n"); } - if (link_up) { - bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); - bnx2x_8073_resolve_fc(phy, params, vars); + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_AN_ADV, + an_10_100_val); + + if (phy->req_duplex == DUPLEX_FULL) + autoneg_val |= (1<<8); + + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, autoneg_val); + + if (((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || + (phy->req_line_speed == SPEED_10000)) { + DP(NETIF_MSG_LINK, "Advertising 10G\n"); + /* Restart autoneg for 10G*/ + + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, + 0x3200); + } else if (phy->req_line_speed != SPEED_10 && + phy->req_line_speed != SPEED_100) { + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_10GBASE_T_AN_CTRL, + 1); } - return link_up; + /* Save spirom version */ + bnx2x_save_848xx_spirom_version(phy, params); + + return 0; } -static u8 bnx2x_7101_read_status(struct bnx2x_phy *phy, +static u8 bnx2x_8481_config_init(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { struct bnx2x *bp = params->bp; - u8 link_up; - u16 val1, val2; - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val2); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1); - DP(NETIF_MSG_LINK, "10G-base-T LASI status 0x%x->0x%x\n", - val2, val1); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); - DP(NETIF_MSG_LINK, "10G-base-T PMA status 0x%x->0x%x\n", - val2, val1); - link_up = ((val1 & 4) == 4); - /* if link is up - * print the AN outcome of the SFX7101 PHY + /* Restore normal power mode*/ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); + + /* HW reset */ + bnx2x_ext_phy_hw_reset(bp, params->port); + + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); + return bnx2x_848xx_cmn_config_init(phy, params, vars); +} + +static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 temp; + msleep(1); + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, + params->port); + msleep(200); /* 100 is not enough */ + + /** + * BCM84823 requires that XGXS links up first @ 10G for normal + * behavior */ - if (link_up) { - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, MDIO_AN_REG_MASTER_STATUS, - &val2); - vars->line_speed = SPEED_10000; - DP(NETIF_MSG_LINK, "SFX7101 AN status 0x%x->Master=%x\n", - val2, (val2 & (1<<14))); - bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); - bnx2x_ext_phy_resolve_fc(phy, params, vars); - } - return link_up; + temp = vars->line_speed; + vars->line_speed = SPEED_10000; + bnx2x_set_autoneg(phy, params, vars, 0); + bnx2x_program_serdes(phy, params, vars); + vars->line_speed = temp; + return bnx2x_848xx_cmn_config_init(phy, params, vars); } static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy, @@ -4364,7 +5199,6 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy, DP(NETIF_MSG_LINK, "Link is up in %dMbps," " is_duplex_full= %d\n", vars->line_speed, (vars->duplex == DUPLEX_FULL)); - /* Check legacy speed AN resolution */ bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, @@ -4391,192 +5225,6 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy, return link_up; } -static void bnx2x_link_int_enable(struct link_params *params) -{ - u8 port = params->port; - u32 mask; - struct bnx2x *bp = params->bp; - - /* setting the status to report on link up - for either XGXS or SerDes */ - - if (params->switch_cfg == SWITCH_CFG_10G) { - mask = (NIG_MASK_XGXS0_LINK10G | - NIG_MASK_XGXS0_LINK_STATUS); - DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n"); - if (!(SINGLE_MEDIA_DIRECT(params)) && - params->phy[INT_PHY].type != - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) { - mask |= NIG_MASK_MI_INT; - DP(NETIF_MSG_LINK, "enabled external phy int\n"); - } - - } else { /* SerDes */ - mask = NIG_MASK_SERDES0_LINK_STATUS; - DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n"); - if (!(SINGLE_MEDIA_DIRECT(params)) && - params->phy[INT_PHY].type != - PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN) { - mask |= NIG_MASK_MI_INT; - DP(NETIF_MSG_LINK, "enabled external phy int\n"); - } - } - bnx2x_bits_en(bp, - NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - mask); - - DP(NETIF_MSG_LINK, "port %x, is_xgxs %x, int_status 0x%x\n", port, - (params->switch_cfg == SWITCH_CFG_10G), - REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); - DP(NETIF_MSG_LINK, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x\n", - REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), - REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), - REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS+port*0x3c)); - DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n", - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); -} - -static void bnx2x_8481_rearm_latch_signal(struct bnx2x *bp, u8 port, - u8 is_mi_int) -{ - u32 latch_status = 0, is_mi_int_status; - /* Disable the MI INT ( external phy int ) - * by writing 1 to the status register. Link down indication - * is high-active-signal, so in this case we need to write the - * status to clear the XOR - */ - /* Read Latched signals */ - latch_status = REG_RD(bp, - NIG_REG_LATCH_STATUS_0 + port*8); - is_mi_int_status = REG_RD(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4); - DP(NETIF_MSG_LINK, "original_signal = 0x%x, nig_status = 0x%x," - "latch_status = 0x%x\n", - is_mi_int, is_mi_int_status, latch_status); - /* Handle only those with latched-signal=up.*/ - if (latch_status & 1) { - /* For all latched-signal=up,Write original_signal to status */ - if (is_mi_int) - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 - + port*4, - NIG_STATUS_EMAC0_MI_INT); - else - bnx2x_bits_dis(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 - + port*4, - NIG_STATUS_EMAC0_MI_INT); - /* For all latched-signal=up : Re-Arm Latch signals */ - REG_WR(bp, NIG_REG_LATCH_STATUS_0 + port*8, - (latch_status & 0xfffe) | (latch_status & 1)); - } -} - -/* - * link management - */ -static void bnx2x_link_int_ack(struct link_params *params, - struct link_vars *vars, u8 is_10g, - u8 is_mi_int) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - - /* first reset all status - * we assume only one line will be change at a time */ - bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - (NIG_STATUS_XGXS0_LINK10G | - NIG_STATUS_XGXS0_LINK_STATUS | - NIG_STATUS_SERDES0_LINK_STATUS)); - if ((params->phy[EXT_PHY1].type - == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) || - (params->phy[EXT_PHY1].type - == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823)) { - bnx2x_8481_rearm_latch_signal(bp, port, is_mi_int); - } - if (vars->phy_link_up) { - if (is_10g) { - /* Disable the 10G link interrupt - * by writing 1 to the status register - */ - DP(NETIF_MSG_LINK, "10G XGXS phy link up\n"); - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_STATUS_XGXS0_LINK10G); - - } else if (params->switch_cfg == SWITCH_CFG_10G) { - /* Disable the link interrupt - * by writing 1 to the relevant lane - * in the status register - */ - u32 ser_lane = ((params->lane_config & - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> - PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - - DP(NETIF_MSG_LINK, "%d speed XGXS phy link up\n", - vars->line_speed); - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - ((1 << ser_lane) << - NIG_STATUS_XGXS0_LINK_STATUS_SIZE)); - - } else { /* SerDes */ - DP(NETIF_MSG_LINK, "SerDes phy link up\n"); - /* Disable the link interrupt - * by writing 1 to the status register - */ - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_STATUS_SERDES0_LINK_STATUS); - } - - } -} - -static u8 bnx2x_7101_format_ver(u32 spirom_ver, u8 *str, u16 *len) -{ - if (*len < 5) - return -EINVAL; - str[0] = (spirom_ver & 0xFF); - str[1] = (spirom_ver & 0xFF00) >> 8; - str[2] = (spirom_ver & 0xFF0000) >> 16; - str[3] = (spirom_ver & 0xFF000000) >> 24; - str[4] = '\0'; - *len -= 5; - return 0; -} - -static u8 bnx2x_format_ver(u32 num, u8 *str, u16 *len) -{ - u8 *str_ptr = str; - u32 mask = 0xf0000000; - u8 shift = 8*4; - u8 digit; - if (*len < 10) { - /* Need more than 10chars for this format */ - *str_ptr = '\0'; - return -EINVAL; - } - while (shift > 0) { - - shift -= 4; - digit = ((num & mask) >> shift); - if (digit < 0xa) - *str_ptr = digit + '0'; - else - *str_ptr = digit - 0xa + 'a'; - str_ptr++; - mask = mask >> 4; - if (shift == 4*4) { - *str_ptr = ':'; - str_ptr++; - } - } - *str_ptr = '\0'; - return 0; -} - static u8 bnx2x_848xx_format_ver(u32 raw_ver, u8 *str, u16 *len) { u8 status = 0; @@ -4586,603 +5234,15 @@ static u8 bnx2x_848xx_format_ver(u32 raw_ver, u8 *str, u16 *len) return status; } -static u8 bnx2x_null_format_ver(u32 spirom_ver, u8 *str, u16 *len) -{ - str[0] = '\0'; - (*len)--; - return 0; -} -u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, - u8 *version, u16 len) -{ - struct bnx2x *bp; - u32 spirom_ver = 0; - u8 status = 0; - u8 *ver_p = version; - if (version == NULL || params == NULL) - return -EINVAL; - bp = params->bp; - - /* Extract first external phy*/ - version[0] = '\0'; - spirom_ver = REG_RD(bp, params->phy[EXT_PHY1].ver_addr); - - if (params->phy[EXT_PHY1].format_fw_ver) - status |= params->phy[EXT_PHY1].format_fw_ver(spirom_ver, - ver_p, - &len); - return status; -} - -static void bnx2x_set_xgxs_loopback(struct bnx2x_phy *phy, - struct link_params *params) -{ - u8 port = params->port; - struct bnx2x *bp = params->bp; - - if (phy->req_line_speed != SPEED_1000) { - u32 md_devad; - - DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n"); - - /* change the uni_phy_addr in the nig */ - md_devad = REG_RD(bp, (NIG_REG_XGXS0_CTRL_MD_DEVAD + - port*0x18)); - - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, 0x5); - - bnx2x_cl45_write(bp, phy, - 5, - (MDIO_REG_BANK_AER_BLOCK + - (MDIO_AER_BLOCK_AER_REG & 0xf)), - 0x2800); - - bnx2x_cl45_write(bp, phy, - 5, - (MDIO_REG_BANK_CL73_IEEEB0 + - (MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)), - 0x6041); - msleep(200); - /* set aer mmd back */ - bnx2x_set_aer_mmd(params, phy); - - /* and md_devad */ - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, - md_devad); - - } else { - u16 mii_ctrl; - DP(NETIF_MSG_LINK, "XGXS 1G loopback enable\n"); - bnx2x_cl45_read(bp, phy, 5, - (MDIO_REG_BANK_COMBO_IEEE0 + - (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)), - &mii_ctrl); - bnx2x_cl45_write(bp, phy, 5, - (MDIO_REG_BANK_COMBO_IEEE0 + - (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)), - mii_ctrl | - MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK); - } -} - -static void bnx2x_8726_config_loopback(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "PMA/PMD ext_phy_loopback: 8726\n"); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0001); -} - -static void bnx2x_7101_config_loopback(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - /* SFX7101_XGXS_TEST1 */ - bnx2x_cl45_write(bp, phy, - MDIO_XS_DEVAD, MDIO_XS_SFX7101_XGXS_TEST1, 0x100); -} - -/* - *------------------------------------------------------------------------ - * bnx2x_override_led_value - - * - * Override the led value of the requested led - * - *------------------------------------------------------------------------ - */ -u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port, - u32 led_idx, u32 value) -{ - u32 reg_val; - - /* If port 0 then use EMAC0, else use EMAC1*/ - u32 emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - - DP(NETIF_MSG_LINK, - "bnx2x_override_led_value() port %x led_idx %d value %d\n", - port, led_idx, value); - - switch (led_idx) { - case 0: /* 10MB led */ - /* Read the current value of the LED register in - the EMAC block */ - reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED); - /* Set the OVERRIDE bit to 1 */ - reg_val |= EMAC_LED_OVERRIDE; - /* If value is 1, set the 10M_OVERRIDE bit, - otherwise reset it.*/ - reg_val = (value == 1) ? (reg_val | EMAC_LED_10MB_OVERRIDE) : - (reg_val & ~EMAC_LED_10MB_OVERRIDE); - REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); - break; - case 1: /*100MB led */ - /*Read the current value of the LED register in - the EMAC block */ - reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED); - /* Set the OVERRIDE bit to 1 */ - reg_val |= EMAC_LED_OVERRIDE; - /* If value is 1, set the 100M_OVERRIDE bit, - otherwise reset it.*/ - reg_val = (value == 1) ? (reg_val | EMAC_LED_100MB_OVERRIDE) : - (reg_val & ~EMAC_LED_100MB_OVERRIDE); - REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); - break; - case 2: /* 1000MB led */ - /* Read the current value of the LED register in the - EMAC block */ - reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED); - /* Set the OVERRIDE bit to 1 */ - reg_val |= EMAC_LED_OVERRIDE; - /* If value is 1, set the 1000M_OVERRIDE bit, otherwise - reset it. */ - reg_val = (value == 1) ? (reg_val | EMAC_LED_1000MB_OVERRIDE) : - (reg_val & ~EMAC_LED_1000MB_OVERRIDE); - REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); - break; - case 3: /* 2500MB led */ - /* Read the current value of the LED register in the - EMAC block*/ - reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED); - /* Set the OVERRIDE bit to 1 */ - reg_val |= EMAC_LED_OVERRIDE; - /* If value is 1, set the 2500M_OVERRIDE bit, otherwise - reset it.*/ - reg_val = (value == 1) ? (reg_val | EMAC_LED_2500MB_OVERRIDE) : - (reg_val & ~EMAC_LED_2500MB_OVERRIDE); - REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); - break; - case 4: /*10G led */ - if (port == 0) { - REG_WR(bp, NIG_REG_LED_10G_P0, - value); - } else { - REG_WR(bp, NIG_REG_LED_10G_P1, - value); - } - break; - case 5: /* TRAFFIC led */ - /* Find if the traffic control is via BMAC or EMAC */ - if (port == 0) - reg_val = REG_RD(bp, NIG_REG_NIG_EMAC0_EN); - else - reg_val = REG_RD(bp, NIG_REG_NIG_EMAC1_EN); - - /* Override the traffic led in the EMAC:*/ - if (reg_val == 1) { - /* Read the current value of the LED register in - the EMAC block */ - reg_val = REG_RD(bp, emac_base + - EMAC_REG_EMAC_LED); - /* Set the TRAFFIC_OVERRIDE bit to 1 */ - reg_val |= EMAC_LED_OVERRIDE; - /* If value is 1, set the TRAFFIC bit, otherwise - reset it.*/ - reg_val = (value == 1) ? (reg_val | EMAC_LED_TRAFFIC) : - (reg_val & ~EMAC_LED_TRAFFIC); - REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val); - } else { /* Override the traffic led in the BMAC: */ - REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 - + port*4, 1); - REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 + port*4, - value); - } - break; - default: - DP(NETIF_MSG_LINK, - "bnx2x_override_led_value() unknown led index %d " - "(should be 0-5)\n", led_idx); - return -EINVAL; - } - - return 0; -} - - -u8 bnx2x_set_led(struct link_params *params, u8 mode, u32 speed) -{ - u8 port = params->port; - u16 hw_led_mode = params->hw_led_mode; - u8 rc = 0; - u32 tmp; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode); - DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n", - speed, hw_led_mode); - switch (mode) { - case LED_MODE_OFF: - REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 0); - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, - SHARED_HW_CFG_LED_MAC1); - - tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); - EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE)); - break; - - case LED_MODE_OPER: - if (SINGLE_MEDIA_DIRECT(params)) { - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); - REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); - } else { - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, - hw_led_mode); - } - - REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + - port*4, 0); - /* Set blinking rate to ~15.9Hz */ - REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4, - LED_BLINK_RATE_VAL); - REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + - port*4, 1); - tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); - EMAC_WR(bp, EMAC_REG_EMAC_LED, - (tmp & (~EMAC_LED_OVERRIDE))); - - if (CHIP_IS_E1(bp) && - ((speed == SPEED_2500) || - (speed == SPEED_1000) || - (speed == SPEED_100) || - (speed == SPEED_10))) { - /* On Everest 1 Ax chip versions for speeds less than - 10G LED scheme is different */ - REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 - + port*4, 1); - REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 + - port*4, 0); - REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 + - port*4, 1); - } - break; - - default: - rc = -EINVAL; - DP(NETIF_MSG_LINK, "bnx2x_set_led: Invalid led mode %d\n", - mode); - break; - } - return rc; - -} - -u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 gp_status = 0, phy_index = 0; - - CL45_RD_OVER_CL22(bp, ¶ms->phy[INT_PHY], - MDIO_REG_BANK_GP_STATUS, - MDIO_GP_STATUS_TOP_AN_STATUS1, - &gp_status); - /* link is up only if both local phy and external phy are up */ - if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { - u8 ext_phy_link_up = 1; - struct link_vars temp_vars; - for (phy_index = EXT_PHY1; phy_index < params->num_phys; - phy_index++) { - if (params->phy[phy_index].read_status) - ext_phy_link_up &= - params->phy[phy_index].read_status( - ¶ms->phy[phy_index], - params, &temp_vars); - } - if (ext_phy_link_up) - return 0; - } - return -ESRCH; -} - -static u8 bnx2x_link_initialize(struct link_params *params, - struct link_vars *vars) -{ - u8 rc = 0; - u8 phy_index, non_ext_phy; - struct bnx2x *bp = params->bp; - /** - * In case of external phy existence, the line speed would be the - * line speed linked up by the external phy. In case it is direct - * only, then the line_speed during initialization will be - * equal to the req_line_speed - */ - vars->line_speed = params->phy[INT_PHY].req_line_speed; - - /** - * Initialize the internal phy in case this is a direct board - * (no external phys), or this board has external phy which requires - * to first. - */ - - if (params->phy[INT_PHY].config_init) - params->phy[INT_PHY].config_init( - ¶ms->phy[INT_PHY], - params, vars); - - /* init ext phy and enable link state int */ - non_ext_phy = (SINGLE_MEDIA_DIRECT(params) || - (params->loopback_mode == LOOPBACK_XGXS_10)); - - if (non_ext_phy || - (params->phy[EXT_PHY1].flags & FLAGS_INIT_XGXS_FIRST) || - (params->loopback_mode == LOOPBACK_EXT_PHY)) { - struct bnx2x_phy *phy = ¶ms->phy[INT_PHY]; - if (vars->line_speed == SPEED_AUTO_NEG) - bnx2x_set_parallel_detection(phy, params); - bnx2x_init_internal_phy(phy, params, vars); - } - - /* Init external phy*/ - if (!non_ext_phy) - for (phy_index = EXT_PHY1; phy_index < params->num_phys; - phy_index++) { - params->phy[phy_index].config_init( - ¶ms->phy[phy_index], - params, vars); - } - - /* Reset the interrupt indication after phy was initialized */ - bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + - params->port*4, - (NIG_STATUS_XGXS0_LINK10G | - NIG_STATUS_XGXS0_LINK_STATUS | - NIG_STATUS_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - return rc; -} - -static void set_phy_vars(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 actual_phy_idx, phy_index; - - for (phy_index = INT_PHY; phy_index < params->num_phys; - phy_index++) { - - actual_phy_idx = phy_index; - params->phy[actual_phy_idx].req_flow_ctrl = - params->req_flow_ctrl; - - params->phy[actual_phy_idx].req_line_speed = - params->req_line_speed; - - params->phy[actual_phy_idx].speed_cap_mask = - params->speed_cap_mask; - - params->phy[actual_phy_idx].req_duplex = - params->req_duplex; - - DP(NETIF_MSG_LINK, "req_flow_ctrl %x, req_line_speed %x," - " speed_cap_mask %x\n", - params->phy[actual_phy_idx].req_flow_ctrl, - params->phy[actual_phy_idx].req_line_speed, - params->phy[actual_phy_idx].speed_cap_mask); - } -} - -u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u32 val; - - DP(NETIF_MSG_LINK, "Phy Initialization started\n"); - DP(NETIF_MSG_LINK, "req_speed %d, req_flowctrl %d\n", - params->req_line_speed, params->req_flow_ctrl); - vars->link_status = 0; - vars->phy_link_up = 0; - vars->link_up = 0; - vars->line_speed = 0; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->mac_type = MAC_TYPE_NONE; - vars->phy_flags = 0; - - /* disable attentions */ - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - - bnx2x_emac_init(params, vars); - - if (params->num_phys == 0) { - DP(NETIF_MSG_LINK, "No phy found for initialization !!\n"); - return -EINVAL; - } - set_phy_vars(params); - - DP(NETIF_MSG_LINK, "Num of phys on board: %d\n", params->num_phys); - if (CHIP_REV_IS_FPGA(bp)) { - - vars->link_up = 1; - vars->line_speed = SPEED_10000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD); - /* enable on E1.5 FPGA */ - if (CHIP_IS_E1H(bp)) { - vars->flow_ctrl |= - (BNX2X_FLOW_CTRL_TX | - BNX2X_FLOW_CTRL_RX); - vars->link_status |= - (LINK_STATUS_TX_FLOW_CONTROL_ENABLED | - LINK_STATUS_RX_FLOW_CONTROL_ENABLED); - } - - bnx2x_emac_enable(params, vars, 0); - bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed); - /* disable drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); - - /* update shared memory */ - bnx2x_update_mng(params, vars->link_status); - - return 0; - - } else - if (CHIP_REV_IS_EMUL(bp)) { - - vars->link_up = 1; - vars->line_speed = SPEED_10000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD); - - bnx2x_bmac_enable(params, vars, 0); - - bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed); - /* Disable drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE - + params->port*4, 0); - - /* update shared memory */ - bnx2x_update_mng(params, vars->link_status); - - return 0; - - } else - if (params->loopback_mode == LOOPBACK_BMAC) { - - vars->link_up = 1; - vars->line_speed = SPEED_10000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->mac_type = MAC_TYPE_BMAC; - - vars->phy_flags = PHY_XGXS_FLAG; - - bnx2x_xgxs_deassert(params); - - /* set bmac loopback */ - bnx2x_bmac_enable(params, vars, 1); - - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + - params->port*4, 0); - - } else if (params->loopback_mode == LOOPBACK_EMAC) { - - vars->link_up = 1; - vars->line_speed = SPEED_1000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->mac_type = MAC_TYPE_EMAC; - - vars->phy_flags = PHY_XGXS_FLAG; - - bnx2x_xgxs_deassert(params); - /* set bmac loopback */ - bnx2x_emac_enable(params, vars, 1); - bnx2x_emac_program(params, vars); - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + - params->port*4, 0); - - } else if ((params->loopback_mode == LOOPBACK_XGXS_10) || - (params->loopback_mode == LOOPBACK_EXT_PHY)) { - - vars->link_up = 1; - vars->line_speed = SPEED_10000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - - vars->phy_flags = PHY_XGXS_FLAG; - - val = REG_RD(bp, - NIG_REG_XGXS0_CTRL_PHY_ADDR+ - params->port*0x18); - - bnx2x_xgxs_deassert(params); - bnx2x_link_initialize(params, vars); - - vars->mac_type = MAC_TYPE_BMAC; - - bnx2x_bmac_enable(params, vars, 0); - - if (params->loopback_mode == LOOPBACK_XGXS_10) { - /* set 10G XGXS loopback */ - params->phy[INT_PHY].config_loopback( - ¶ms->phy[INT_PHY], - params); - - } else { - /* set external phy loopback */ - u8 phy_index; - for (phy_index = EXT_PHY1; - phy_index < params->num_phys; phy_index++) { - if (params->phy[phy_index].config_loopback) - params->phy[phy_index].config_loopback( - ¶ms->phy[phy_index], - params); - } - } - - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + - params->port*4, 0); - - bnx2x_set_led(params, LED_MODE_OPER, vars->line_speed); - } else - /* No loopback */ - { - if (params->switch_cfg == SWITCH_CFG_10G) - bnx2x_xgxs_deassert(params); - else - bnx2x_serdes_deassert(bp, params->port); - bnx2x_link_initialize(params, vars); - msleep(30); - bnx2x_link_int_enable(params); - } - return 0; -} - - -static void bnx2x_8726_link_reset(struct bnx2x_phy *phy, - struct link_params *params) +static void bnx2x_8481_hw_reset(struct bnx2x_phy *phy, + struct link_params *params) { - struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "bnx2x_8726_link_reset port %d\n", params->port); - /* Set serial boot control for external load */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL, 0x0001); + bnx2x_set_gpio(params->bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, 0); + bnx2x_set_gpio(params->bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, 1); } -static void bnx2x_8727_link_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - /* Disable Transmitter */ - bnx2x_sfp_set_transmitter(bp, phy, params->port, 0); -} -static void bnx2x_8073_link_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 gpio_port; - gpio_port = params->port; - DP(NETIF_MSG_LINK, "Setting 8073 port %d into low power mode\n", - gpio_port); - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_LOW, - gpio_port); -} static void bnx2x_8481_link_reset(struct bnx2x_phy *phy, struct link_params *params) { @@ -5202,385 +5262,131 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy, port); } -static void bnx2x_common_ext_link_reset(struct bnx2x_phy *phy, - struct link_params *params) +/******************************************************************/ +/* SFX7101 PHY SECTION */ +/******************************************************************/ +static void bnx2x_7101_config_loopback(struct bnx2x_phy *phy, + struct link_params *params) { struct bnx2x *bp = params->bp; - u8 gpio_port; - /* HW reset */ - gpio_port = params->port; - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW, - gpio_port); - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_LOW, - gpio_port); - DP(NETIF_MSG_LINK, "reset external PHY\n"); -} - -static void bnx2x_int_link_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - /* reset the SerDes/XGXS */ - REG_WR(params->bp, GRCBASE_MISC + - MISC_REGISTERS_RESET_REG_3_CLEAR, - (0x1ff << (params->port*16))); + /* SFX7101_XGXS_TEST1 */ + bnx2x_cl45_write(bp, phy, + MDIO_XS_DEVAD, MDIO_XS_SFX7101_XGXS_TEST1, 0x100); } -u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, - u8 reset_ext_phy) +static u8 bnx2x_7101_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { + u16 fw_ver1, fw_ver2, val; struct bnx2x *bp = params->bp; - u8 phy_index, port = params->port; - DP(NETIF_MSG_LINK, "Resetting the link of port %d\n", port); - /* disable attentions */ - vars->link_status = 0; - bnx2x_update_mng(params, vars->link_status); - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - - /* activate nig drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); - - /* disable nig egress interface */ - REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0); - REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); + DP(NETIF_MSG_LINK, "Setting the SFX7101 LASI indication\n"); - /* Stop BigMac rx */ - bnx2x_bmac_rx_disable(bp, port); + /* Restore normal power mode*/ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); + /* HW reset */ + bnx2x_ext_phy_hw_reset(bp, params->port); + bnx2x_wait_reset_complete(bp, phy); - /* disable emac */ - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0x1); + DP(NETIF_MSG_LINK, "Setting the SFX7101 LED to blink on traffic\n"); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LED_CNTL, (1<<3)); - msleep(10); - /* The PHY reset is controled by GPIO 1 - * Hold it as vars low - */ - /* clear link led */ - bnx2x_set_led(params, LED_MODE_OFF, 0); - if (reset_ext_phy) { - for (phy_index = EXT_PHY1; phy_index < params->num_phys; - phy_index++) { - if (params->phy[phy_index].link_reset) - params->phy[phy_index].link_reset( - ¶ms->phy[phy_index], - params); - } - } + bnx2x_ext_phy_set_pause(params, phy, vars); + /* Restart autoneg */ + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, &val); + val |= 0x200; + bnx2x_cl45_write(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, val); - if (params->phy[INT_PHY].link_reset) - params->phy[INT_PHY].link_reset( - ¶ms->phy[INT_PHY], params); - /* reset BigMac */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + /* Save spirom version */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER1, &fw_ver1); - /* disable nig ingress interface */ - REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0); - REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0); - REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0); - REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); - vars->link_up = 0; + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER2, &fw_ver2); + bnx2x_save_spirom_version(bp, params->port, + (u32)(fw_ver1<<16 | fw_ver2), phy->ver_addr); return 0; } -static u8 bnx2x_update_link_down(struct link_params *params, - struct link_vars *vars) +static u8 bnx2x_7101_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { struct bnx2x *bp = params->bp; - u8 port = params->port; - - DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port); - bnx2x_set_led(params, LED_MODE_OFF, 0); - - /* indicate no mac active */ - vars->mac_type = MAC_TYPE_NONE; - - /* update shared memory */ - vars->link_status = 0; - vars->line_speed = 0; - bnx2x_update_mng(params, vars->link_status); - - /* activate nig drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); - - /* disable emac */ - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + u8 link_up; + u16 val1, val2; + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val2); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "10G-base-T LASI status 0x%x->0x%x\n", + val2, val1); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); + DP(NETIF_MSG_LINK, "10G-base-T PMA status 0x%x->0x%x\n", + val2, val1); + link_up = ((val1 & 4) == 4); + /* if link is up + * print the AN outcome of the SFX7101 PHY + */ + if (link_up) { + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_MASTER_STATUS, + &val2); + vars->line_speed = SPEED_10000; + DP(NETIF_MSG_LINK, "SFX7101 AN status 0x%x->Master=%x\n", + val2, (val2 & (1<<14))); + bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); + bnx2x_ext_phy_resolve_fc(phy, params, vars); + } + return link_up; +} - msleep(10); - /* reset BigMac */ - bnx2x_bmac_rx_disable(bp, params->port); - REG_WR(bp, GRCBASE_MISC + - MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); +static u8 bnx2x_7101_format_ver(u32 spirom_ver, u8 *str, u16 *len) +{ + if (*len < 5) + return -EINVAL; + str[0] = (spirom_ver & 0xFF); + str[1] = (spirom_ver & 0xFF00) >> 8; + str[2] = (spirom_ver & 0xFF0000) >> 16; + str[3] = (spirom_ver & 0xFF000000) >> 24; + str[4] = '\0'; + *len -= 5; return 0; } -static u8 bnx2x_update_link_up(struct link_params *params, - struct link_vars *vars, - u8 link_10g) -{ - struct bnx2x *bp = params->bp; - u8 port = params->port; - u8 rc = 0; - - vars->link_status |= LINK_STATUS_LINK_UP; - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) - vars->link_status |= - LINK_STATUS_TX_FLOW_CONTROL_ENABLED; - - if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) - vars->link_status |= - LINK_STATUS_RX_FLOW_CONTROL_ENABLED; - if (link_10g) { - bnx2x_bmac_enable(params, vars, 0); - bnx2x_set_led(params, LED_MODE_OPER, SPEED_10000); - } else { - rc = bnx2x_emac_program(params, vars); - - bnx2x_emac_enable(params, vars, 0); - - /* AN complete? */ - if ((vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) - && (!(vars->phy_flags & PHY_SGMII_FLAG)) && - SINGLE_MEDIA_DIRECT(params)) - bnx2x_set_gmii_tx_driver(params); - } - - /* PBF - link up */ - rc |= bnx2x_pbf_update(params, vars->flow_ctrl, - vars->line_speed); - - /* disable drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0); - - /* update shared memory */ - bnx2x_update_mng(params, vars->link_status); - msleep(20); - return rc; -} -/** - * The bnx2x_link_update function should be called upon link - * interrupt. - * Link is considered up as follows: - * - DIRECT_SINGLE_MEDIA - Only XGXS link (internal link) needs - * to be up - * - SINGLE_MEDIA - The link between the 577xx and the external - * phy (XGXS) need to up as well as the external link of the - * phy (PHY_EXT1) - * - DUAL_MEDIA - The link between the 577xx and the first - * external phy needs to be up, and at least one of the 2 - * external phy link must be up. - */ -u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) +void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy) { - struct bnx2x *bp = params->bp; - struct link_vars phy_vars[MAX_PHYS]; - u8 port = params->port; - u8 link_10g, phy_index; - u8 ext_phy_link_up = 0, cur_link_up, rc = 0; - u8 is_mi_int = 0; - u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed; - u8 active_external_phy = INT_PHY; - vars->link_status = 0; - for (phy_index = INT_PHY; phy_index < params->num_phys; - phy_index++) { - phy_vars[phy_index].flow_ctrl = 0; - phy_vars[phy_index].link_status = 0; - phy_vars[phy_index].line_speed = 0; - phy_vars[phy_index].duplex = DUPLEX_FULL; - phy_vars[phy_index].phy_link_up = 0; - phy_vars[phy_index].link_up = 0; - } - - DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n", - port, (vars->phy_flags & PHY_XGXS_FLAG), - REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); - - is_mi_int = (u8)(REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + - port*0x18) > 0); - DP(NETIF_MSG_LINK, "int_mask 0x%x MI_INT %x, SERDES_LINK %x\n", - REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), - is_mi_int, - REG_RD(bp, - NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c)); - - DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n", - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), - REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); - - /* disable emac */ - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); - - /** - * Step 1: - * Check external link change only for external phys, and apply - * priority selection between them in case the link on both phys - * is up. Note that the instead of the common vars, a temporary - * vars argument is used since each phy may have different link/ - * speed/duplex result - */ - for (phy_index = EXT_PHY1; phy_index < params->num_phys; - phy_index++) { - struct bnx2x_phy *phy = ¶ms->phy[phy_index]; - if (!phy->read_status) - continue; - /* Read link status and params of this ext phy */ - cur_link_up = phy->read_status(phy, params, - &phy_vars[phy_index]); - if (cur_link_up) { - DP(NETIF_MSG_LINK, "phy in index %d link is up\n", - phy_index); - } else { - DP(NETIF_MSG_LINK, "phy in index %d link is down\n", - phy_index); - continue; - } - - if (!ext_phy_link_up) { - ext_phy_link_up = 1; - active_external_phy = phy_index; - } - } - prev_line_speed = vars->line_speed; - /** - * Step 2: - * Read the status of the internal phy. In case of - * DIRECT_SINGLE_MEDIA board, this link is the external link, - * otherwise this is the link between the 577xx and the first - * external phy - */ - if (params->phy[INT_PHY].read_status) - params->phy[INT_PHY].read_status( - ¶ms->phy[INT_PHY], - params, vars); - /** - * The INT_PHY flow control reside in the vars. This include the - * case where the speed or flow control are not set to AUTO. - * Otherwise, the active external phy flow control result is set - * to the vars. The ext_phy_line_speed is needed to check if the - * speed is different between the internal phy and external phy. - * This case may be result of intermediate link speed change. - */ - if (active_external_phy > INT_PHY) { - vars->flow_ctrl = phy_vars[active_external_phy].flow_ctrl; - /** - * Link speed is taken from the XGXS. AN and FC result from - * the external phy. - */ - vars->link_status |= phy_vars[active_external_phy].link_status; - ext_phy_line_speed = phy_vars[active_external_phy].line_speed; - vars->duplex = phy_vars[active_external_phy].duplex; - if (params->phy[active_external_phy].supported & - SUPPORTED_FIBRE) - vars->link_status |= LINK_STATUS_SERDES_LINK; - DP(NETIF_MSG_LINK, "Active external phy selected: %x\n", - active_external_phy); - } - DP(NETIF_MSG_LINK, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x," - " ext_phy_line_speed = %d\n", vars->flow_ctrl, - vars->link_status, ext_phy_line_speed); - /** - * Upon link speed change set the NIG into drain mode. Comes to - * deals with possible FIFO glitch due to clk change when speed - * is decreased without link down indicator - */ - - if (vars->phy_link_up) { - if (!(SINGLE_MEDIA_DIRECT(params)) && ext_phy_link_up && - (ext_phy_line_speed != vars->line_speed)) { - DP(NETIF_MSG_LINK, "Internal link speed %d is" - " different than the external" - " link speed %d\n", vars->line_speed, - ext_phy_line_speed); - vars->phy_link_up = 0; - } else if (prev_line_speed != vars->line_speed) { - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE - + params->port*4, 0); - msleep(1); - } - } + u16 val, cnt; - /* anything 10 and over uses the bmac */ - link_10g = ((vars->line_speed == SPEED_10000) || - (vars->line_speed == SPEED_12000) || - (vars->line_speed == SPEED_12500) || - (vars->line_speed == SPEED_13000) || - (vars->line_speed == SPEED_15000) || - (vars->line_speed == SPEED_16000)); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_7101_RESET, &val); - bnx2x_link_int_ack(params, vars, link_10g, is_mi_int); + for (cnt = 0; cnt < 10; cnt++) { + msleep(50); + /* Writes a self-clearing reset */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_7101_RESET, + (val | (1<<15))); + /* Wait for clear */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_7101_RESET, &val); - /** - * In case external phy link is up, and internal link is down - * (not initialized yet probably after link initialization, it - * needs to be initialized. - * Note that after link down-up as result of cable plug, the xgxs - * link would probably become up again without the need - * initialize it - */ - if (!(SINGLE_MEDIA_DIRECT(params))) { - DP(NETIF_MSG_LINK, "ext_phy_link_up = %d, int_link_up = %d," - " init_preceding = %d\n", ext_phy_link_up, - vars->phy_link_up, - params->phy[EXT_PHY1].flags & - FLAGS_INIT_XGXS_FIRST); - if (!(params->phy[EXT_PHY1].flags & - FLAGS_INIT_XGXS_FIRST) - && ext_phy_link_up && !vars->phy_link_up) { - vars->line_speed = ext_phy_line_speed; - if (vars->line_speed < SPEED_1000) - vars->phy_flags |= PHY_SGMII_FLAG; - else - vars->phy_flags &= ~PHY_SGMII_FLAG; - bnx2x_init_internal_phy(¶ms->phy[INT_PHY], - params, - vars); - } + if ((val & (1<<15)) == 0) + break; } - /** - * Link is up only if both local phy and external phy (in case of - * non-direct board) are up - */ - vars->link_up = (vars->phy_link_up && - (ext_phy_link_up || - SINGLE_MEDIA_DIRECT(params))); - - if (vars->link_up) - rc = bnx2x_update_link_up(params, vars, link_10g); - else - rc = bnx2x_update_link_down(params, vars); - - return rc; -} - -static void bnx2x_8481_hw_reset(struct bnx2x_phy *phy, - struct link_params *params) -{ - bnx2x_set_gpio(params->bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW, 0); - bnx2x_set_gpio(params->bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW, 1); -} - -static void bnx2x_8727_hw_reset(struct bnx2x_phy *phy, - struct link_params *params) { - u32 swap_val, swap_override; - u8 port; - /** - * The PHY reset is controlled by GPIO 1. Fake the port number - * to cancel the swap done in set_gpio() - */ - struct bnx2x *bp = params->bp; - swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); - swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); - port = (swap_val && swap_override) ^ 1; - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_LOW, port); } static void bnx2x_7101_hw_reset(struct bnx2x_phy *phy, @@ -5592,6 +5398,7 @@ static void bnx2x_7101_hw_reset(struct bnx2x_phy *phy, bnx2x_set_gpio(params->bp, MISC_REGISTERS_GPIO_1, MISC_REGISTERS_GPIO_OUTPUT_LOW, params->port); } + /******************************************************************/ /* STATIC PHY DECLARATION */ /******************************************************************/ @@ -5854,7 +5661,6 @@ static struct bnx2x_phy phy_8727 = { .mdio_ctrl = 0, .supported = (SUPPORTED_10000baseT_Full | SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg | SUPPORTED_FIBRE | SUPPORTED_Pause | SUPPORTED_Asym_Pause), @@ -6240,6 +6046,271 @@ u32 bnx2x_supported_attr(struct link_params *params, u8 phy_idx) return 0; } +static void set_phy_vars(struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u8 actual_phy_idx, phy_index; + + for (phy_index = INT_PHY; phy_index < params->num_phys; + phy_index++) { + + actual_phy_idx = phy_index; + params->phy[actual_phy_idx].req_flow_ctrl = + params->req_flow_ctrl; + + params->phy[actual_phy_idx].req_line_speed = + params->req_line_speed; + + params->phy[actual_phy_idx].speed_cap_mask = + params->speed_cap_mask; + + params->phy[actual_phy_idx].req_duplex = + params->req_duplex; + + DP(NETIF_MSG_LINK, "req_flow_ctrl %x, req_line_speed %x," + " speed_cap_mask %x\n", + params->phy[actual_phy_idx].req_flow_ctrl, + params->phy[actual_phy_idx].req_line_speed, + params->phy[actual_phy_idx].speed_cap_mask); + } +} + +u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u32 val; + + DP(NETIF_MSG_LINK, "Phy Initialization started\n"); + DP(NETIF_MSG_LINK, "req_speed %d, req_flowctrl %d\n", + params->req_line_speed, params->req_flow_ctrl); + vars->link_status = 0; + vars->phy_link_up = 0; + vars->link_up = 0; + vars->line_speed = 0; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->mac_type = MAC_TYPE_NONE; + vars->phy_flags = 0; + + /* disable attentions */ + bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4, + (NIG_MASK_XGXS0_LINK_STATUS | + NIG_MASK_XGXS0_LINK10G | + NIG_MASK_SERDES0_LINK_STATUS | + NIG_MASK_MI_INT)); + + bnx2x_emac_init(params, vars); + + if (params->num_phys == 0) { + DP(NETIF_MSG_LINK, "No phy found for initialization !!\n"); + return -EINVAL; + } + set_phy_vars(params); + + DP(NETIF_MSG_LINK, "Num of phys on board: %d\n", params->num_phys); + if (CHIP_REV_IS_FPGA(bp)) { + + vars->link_up = 1; + vars->line_speed = SPEED_10000; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD); + /* enable on E1.5 FPGA */ + if (CHIP_IS_E1H(bp)) { + vars->flow_ctrl |= + (BNX2X_FLOW_CTRL_TX | + BNX2X_FLOW_CTRL_RX); + vars->link_status |= + (LINK_STATUS_TX_FLOW_CONTROL_ENABLED | + LINK_STATUS_RX_FLOW_CONTROL_ENABLED); + } + + bnx2x_emac_enable(params, vars, 0); + bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed); + /* disable drain */ + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); + + /* update shared memory */ + bnx2x_update_mng(params, vars->link_status); + + return 0; + + } else + if (CHIP_REV_IS_EMUL(bp)) { + + vars->link_up = 1; + vars->line_speed = SPEED_10000; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD); + + bnx2x_bmac_enable(params, vars, 0); + + bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed); + /* Disable drain */ + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + + params->port*4, 0); + + /* update shared memory */ + bnx2x_update_mng(params, vars->link_status); + + return 0; + + } else + if (params->loopback_mode == LOOPBACK_BMAC) { + + vars->link_up = 1; + vars->line_speed = SPEED_10000; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->mac_type = MAC_TYPE_BMAC; + + vars->phy_flags = PHY_XGXS_FLAG; + + bnx2x_xgxs_deassert(params); + + /* set bmac loopback */ + bnx2x_bmac_enable(params, vars, 1); + + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + + params->port*4, 0); + + } else if (params->loopback_mode == LOOPBACK_EMAC) { + + vars->link_up = 1; + vars->line_speed = SPEED_1000; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->mac_type = MAC_TYPE_EMAC; + + vars->phy_flags = PHY_XGXS_FLAG; + + bnx2x_xgxs_deassert(params); + /* set bmac loopback */ + bnx2x_emac_enable(params, vars, 1); + bnx2x_emac_program(params, vars); + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + + params->port*4, 0); + + } else if ((params->loopback_mode == LOOPBACK_XGXS) || + (params->loopback_mode == LOOPBACK_EXT_PHY)) { + + vars->link_up = 1; + vars->line_speed = SPEED_10000; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + + vars->phy_flags = PHY_XGXS_FLAG; + + val = REG_RD(bp, + NIG_REG_XGXS0_CTRL_PHY_ADDR+ + params->port*0x18); + + bnx2x_xgxs_deassert(params); + bnx2x_link_initialize(params, vars); + + vars->mac_type = MAC_TYPE_BMAC; + + bnx2x_bmac_enable(params, vars, 0); + + if (params->loopback_mode == LOOPBACK_XGXS) { + /* set 10G XGXS loopback */ + params->phy[INT_PHY].config_loopback( + ¶ms->phy[INT_PHY], + params); + + } else { + /* set external phy loopback */ + u8 phy_index; + for (phy_index = EXT_PHY1; + phy_index < params->num_phys; phy_index++) { + if (params->phy[phy_index].config_loopback) + params->phy[phy_index].config_loopback( + ¶ms->phy[phy_index], + params); + } + } + + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + + params->port*4, 0); + + bnx2x_set_led(params, LED_MODE_OPER, vars->line_speed); + } else + /* No loopback */ + { + if (params->switch_cfg == SWITCH_CFG_10G) + bnx2x_xgxs_deassert(params); + else + bnx2x_serdes_deassert(bp, params->port); + bnx2x_link_initialize(params, vars); + msleep(30); + bnx2x_link_int_enable(params); + } + return 0; +} +u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, + u8 reset_ext_phy) +{ + struct bnx2x *bp = params->bp; + u8 phy_index, port = params->port; + DP(NETIF_MSG_LINK, "Resetting the link of port %d\n", port); + /* disable attentions */ + vars->link_status = 0; + bnx2x_update_mng(params, vars->link_status); + bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, + (NIG_MASK_XGXS0_LINK_STATUS | + NIG_MASK_XGXS0_LINK10G | + NIG_MASK_SERDES0_LINK_STATUS | + NIG_MASK_MI_INT)); + + /* activate nig drain */ + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + + /* disable nig egress interface */ + REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0); + REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); + + /* Stop BigMac rx */ + bnx2x_bmac_rx_disable(bp, port); + + /* disable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + + msleep(10); + /* The PHY reset is controled by GPIO 1 + * Hold it as vars low + */ + /* clear link led */ + bnx2x_set_led(params, LED_MODE_OFF, 0); + if (reset_ext_phy) { + for (phy_index = EXT_PHY1; phy_index < params->num_phys; + phy_index++) { + if (params->phy[phy_index].link_reset) + params->phy[phy_index].link_reset( + ¶ms->phy[phy_index], + params); + } + } + + if (params->phy[INT_PHY].link_reset) + params->phy[INT_PHY].link_reset( + ¶ms->phy[INT_PHY], params); + /* reset BigMac */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + + /* disable nig ingress interface */ + REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0); + REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0); + REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0); + REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); + vars->link_up = 0; + return 0; +} + +/****************************************************************************/ +/* Common function */ +/****************************************************************************/ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base) { struct bnx2x_phy phy[PORT_MAX]; @@ -6348,6 +6419,43 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base) return 0; } +static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base) +{ + u32 val; + s8 port; + struct bnx2x_phy phy; + /* Use port1 because of the static port-swap */ + /* Enable the module detection interrupt */ + val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN); + val |= ((1<<MISC_REGISTERS_GPIO_3)| + (1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT))); + REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val); + + bnx2x_ext_phy_hw_reset(bp, 1); + msleep(5); + for (port = 0; port < PORT_MAX; port++) { + /* Extract the ext phy address for the port */ + if (bnx2x_populate_phy(bp, EXT_PHY1, shmem_base, + port, &phy) != + 0) { + DP(NETIF_MSG_LINK, "populate phy failed\n"); + return -EINVAL; + } + + /* Reset phy*/ + bnx2x_cl45_write(bp, &phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001); + + + /* Set fault module detected LED on */ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, + MISC_REGISTERS_GPIO_HIGH, + port); + } + + return 0; +} + static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base) { s8 port, first_port, i; @@ -6420,43 +6528,6 @@ static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base) return 0; } -static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base) -{ - u32 val; - s8 port; - struct bnx2x_phy phy; - /* Use port1 because of the static port-swap */ - /* Enable the module detection interrupt */ - val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN); - val |= ((1<<MISC_REGISTERS_GPIO_3)| - (1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT))); - REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val); - - bnx2x_ext_phy_hw_reset(bp, 1); - msleep(5); - for (port = 0; port < PORT_MAX; port++) { - /* Extract the ext phy address for the port */ - if (bnx2x_populate_phy(bp, EXT_PHY1, shmem_base, - port, &phy) != - 0) { - DP(NETIF_MSG_LINK, "populate phy failed\n"); - return -EINVAL; - } - - /* Reset phy*/ - bnx2x_cl45_write(bp, &phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001); - - - /* Set fault module detected LED on */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, - MISC_REGISTERS_GPIO_HIGH, - port); - } - - return 0; -} - u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base) { u8 rc = 0; @@ -6497,30 +6568,6 @@ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base) return rc; } -void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy) -{ - u16 val, cnt; - - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_7101_RESET, &val); - - for (cnt = 0; cnt < 10; cnt++) { - msleep(50); - /* Writes a self-clearing reset */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_7101_RESET, - (val | (1<<15))); - /* Wait for clear */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_7101_RESET, &val); - - if ((val & (1<<15)) == 0) - break; - } -} u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base) { |