summaryrefslogtreecommitdiff
path: root/drivers/pci/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/pci.c')
-rw-r--r--drivers/pci/pci.c142
1 files changed, 65 insertions, 77 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6d61200..0195066 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -426,7 +426,6 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
* given PCI device
* @dev: PCI device to handle.
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
- * @wait: If 'true', wait for the device to change its power state
*
* RETURN VALUE:
* -EINVAL if the requested state is invalid.
@@ -435,12 +434,15 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
* 0 if device already is in the requested state.
* 0 if device's power state has been successfully changed.
*/
-static int
-pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
+static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
{
u16 pmcsr;
bool need_restore = false;
+ /* Check if we're already there */
+ if (dev->current_state == state)
+ return 0;
+
if (!dev->pm_cap)
return -EIO;
@@ -451,10 +453,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
* Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
*/
- if (dev->current_state == state) {
- /* we're already there */
- return 0;
- } else if (state != PCI_D0 && dev->current_state <= PCI_D3cold
+ if (state != PCI_D0 && dev->current_state <= PCI_D3cold
&& dev->current_state > state) {
dev_err(&dev->dev, "invalid power transition "
"(from state %d to %d)\n", dev->current_state, state);
@@ -481,10 +480,8 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
break;
case PCI_UNKNOWN: /* Boot-up */
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
- && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) {
+ && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
need_restore = true;
- wait = true;
- }
/* Fall-through: force to D0 */
default:
pmcsr = 0;
@@ -494,9 +491,6 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
/* enter specified state */
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
- if (!wait)
- return 0;
-
/* Mandatory power management transition delays */
/* see PCI PM 1.1 5.6.1 table 18 */
if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
@@ -521,7 +515,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
if (need_restore)
pci_restore_bars(dev);
- if (wait && dev->bus->self)
+ if (dev->bus->self)
pcie_aspm_pm_state_change(dev->bus->self);
return 0;
@@ -546,6 +540,53 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
}
/**
+ * pci_platform_power_transition - Use platform to change device power state
+ * @dev: PCI device to handle.
+ * @state: State to put the device into.
+ */
+static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
+{
+ int error;
+
+ if (platform_pci_power_manageable(dev)) {
+ error = platform_pci_set_power_state(dev, state);
+ if (!error)
+ pci_update_current_state(dev, state);
+ } else {
+ error = -ENODEV;
+ /* Fall back to PCI_D0 if native PM is not supported */
+ pci_update_current_state(dev, PCI_D0);
+ }
+
+ return error;
+}
+
+/**
+ * __pci_start_power_transition - Start power transition of a PCI device
+ * @dev: PCI device to handle.
+ * @state: State to put the device into.
+ */
+static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
+{
+ if (state == PCI_D0)
+ pci_platform_power_transition(dev, PCI_D0);
+}
+
+/**
+ * __pci_complete_power_transition - Complete power transition of a PCI device
+ * @dev: PCI device to handle.
+ * @state: State to put the device into.
+ *
+ * This function should not be called directly by device drivers.
+ */
+int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
+{
+ return state > PCI_D0 ?
+ pci_platform_power_transition(dev, state) : -EINVAL;
+}
+EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
+
+/**
* pci_set_power_state - Set the power state of a PCI device
* @dev: PCI device to handle.
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
@@ -577,30 +618,21 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
*/
return 0;
- if (state == PCI_D0 && platform_pci_power_manageable(dev)) {
- /*
- * Allow the platform to change the state, for example via ACPI
- * _PR0, _PS0 and some such, but do not trust it.
- */
- int ret = platform_pci_set_power_state(dev, PCI_D0);
- if (!ret)
- pci_update_current_state(dev, PCI_D0);
- }
+ /* Check if we're already there */
+ if (dev->current_state == state)
+ return 0;
+
+ __pci_start_power_transition(dev, state);
+
/* This device is quirked not to be put into D3, so
don't put it in D3 */
if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
return 0;
- error = pci_raw_set_power_state(dev, state, true);
+ error = pci_raw_set_power_state(dev, state);
- if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
- /* Allow the platform to finalize the transition */
- int ret = platform_pci_set_power_state(dev, state);
- if (!ret) {
- pci_update_current_state(dev, state);
- error = 0;
- }
- }
+ if (!__pci_complete_power_transition(dev, state))
+ error = 0;
return error;
}
@@ -1231,7 +1263,7 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
if (target_state == PCI_POWER_ERROR)
return -EIO;
- pci_enable_wake(dev, target_state, true);
+ pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
error = pci_set_power_state(dev, target_state);
@@ -1381,50 +1413,6 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev)
}
/**
- * pci_restore_standard_config - restore standard config registers of PCI device
- * @dev: PCI device to handle
- *
- * This function assumes that the device's configuration space is accessible.
- * If the device needs to be powered up, the function will wait for it to
- * change the state.
- */
-int pci_restore_standard_config(struct pci_dev *dev)
-{
- pci_power_t prev_state;
- int error;
-
- pci_update_current_state(dev, PCI_D0);
-
- prev_state = dev->current_state;
- if (prev_state == PCI_D0)
- goto Restore;
-
- error = pci_raw_set_power_state(dev, PCI_D0, false);
- if (error)
- return error;
-
- /*
- * This assumes that we won't get a bus in B2 or B3 from the BIOS, but
- * we've made this assumption forever and it appears to be universally
- * satisfied.
- */
- switch(prev_state) {
- case PCI_D3cold:
- case PCI_D3hot:
- mdelay(pci_pm_d3_delay);
- break;
- case PCI_D2:
- udelay(PCI_PM_D2_DELAY);
- break;
- }
-
- pci_update_current_state(dev, PCI_D0);
-
- Restore:
- return dev->state_saved ? pci_restore_state(dev) : 0;
-}
-
-/**
* pci_enable_ari - enable ARI forwarding if hardware support it
* @dev: the PCI device
*/