diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_scsi.c')
-rw-r--r-- | drivers/scsi/lpfc/lpfc_scsi.c | 930 |
1 files changed, 785 insertions, 145 deletions
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 679adff..7991ba1 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2008 Emulex. All rights reserved. * + * Copyright (C) 2004-2009 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -31,8 +31,10 @@ #include <scsi/scsi_transport_fc.h> #include "lpfc_version.h" +#include "lpfc_hw4.h" #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_sli4.h" #include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" @@ -57,6 +59,8 @@ static char *dif_op_str[] = { "SCSI_PROT_READ_CONVERT", "SCSI_PROT_WRITE_CONVERT" }; +static void +lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb); static void lpfc_debug_save_data(struct scsi_cmnd *cmnd) @@ -325,7 +329,7 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) vports = lpfc_create_vport_work_array(phba); if (vports != NULL) - for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { shost = lpfc_shost_from_vport(vports[i]); shost_for_each_device(sdev, shost) { new_queue_depth = @@ -379,7 +383,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) vports = lpfc_create_vport_work_array(phba); if (vports != NULL) - for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { shost = lpfc_shost_from_vport(vports[i]); shost_for_each_device(sdev, shost) { if (vports[i]->cfg_lun_queue_depth <= @@ -427,7 +431,7 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba) vports = lpfc_create_vport_work_array(phba); if (vports != NULL) - for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { shost = lpfc_shost_from_vport(vports[i]); shost_for_each_device(sdev, shost) { rport = starget_to_rport(scsi_target(sdev)); @@ -438,22 +442,23 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba) } /** - * lpfc_new_scsi_buf - Scsi buffer allocator + * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec * @vport: The virtual port for which this call being executed. + * @num_to_allocate: The requested number of buffers to allocate. * - * This routine allocates a scsi buffer, which contains all the necessary - * information needed to initiate a SCSI I/O. The non-DMAable buffer region - * contains information to build the IOCB. The DMAable region contains - * memory for the FCP CMND, FCP RSP, and the initial BPL. In addition to - * allocating memory, the FCP CMND and FCP RSP BDEs are setup in the BPL - * and the BPL BDE is setup in the IOCB. + * This routine allocates a scsi buffer for device with SLI-3 interface spec, + * the scsi buffer contains all the necessary information needed to initiate + * a SCSI I/O. The non-DMAable buffer region contains information to build + * the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP, + * and the initial BPL. In addition to allocating memory, the FCP CMND and + * FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB. * * Return codes: - * NULL - Error - * Pointer to lpfc_scsi_buf data structure - Success + * int - number of scsi buffers that were allocated. + * 0 = failure, less than num_to_alloc is a partial failure. **/ -static struct lpfc_scsi_buf * -lpfc_new_scsi_buf(struct lpfc_vport *vport) +static int +lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc) { struct lpfc_hba *phba = vport->phba; struct lpfc_scsi_buf *psb; @@ -463,107 +468,401 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport) dma_addr_t pdma_phys_fcp_rsp; dma_addr_t pdma_phys_bpl; uint16_t iotag; + int bcnt; - psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL); - if (!psb) - return NULL; + for (bcnt = 0; bcnt < num_to_alloc; bcnt++) { + psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL); + if (!psb) + break; + + /* + * Get memory from the pci pool to map the virt space to pci + * bus space for an I/O. The DMA buffer includes space for the + * struct fcp_cmnd, struct fcp_rsp and the number of bde's + * necessary to support the sg_tablesize. + */ + psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, + GFP_KERNEL, &psb->dma_handle); + if (!psb->data) { + kfree(psb); + break; + } + + /* Initialize virtual ptrs to dma_buf region. */ + memset(psb->data, 0, phba->cfg_sg_dma_buf_size); + + /* Allocate iotag for psb->cur_iocbq. */ + iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq); + if (iotag == 0) { + pci_pool_free(phba->lpfc_scsi_dma_buf_pool, + psb->data, psb->dma_handle); + kfree(psb); + break; + } + psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP; + + psb->fcp_cmnd = psb->data; + psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd); + psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) + + sizeof(struct fcp_rsp); + + /* Initialize local short-hand pointers. */ + bpl = psb->fcp_bpl; + pdma_phys_fcp_cmd = psb->dma_handle; + pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd); + pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) + + sizeof(struct fcp_rsp); + + /* + * The first two bdes are the FCP_CMD and FCP_RSP. The balance + * are sg list bdes. Initialize the first two and leave the + * rest for queuecommand. + */ + bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd)); + bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd)); + bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd); + bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64; + bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w); + + /* Setup the physical region for the FCP RSP */ + bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp)); + bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp)); + bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp); + bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64; + bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w); + + /* + * Since the IOCB for the FCP I/O is built into this + * lpfc_scsi_buf, initialize it with all known data now. + */ + iocb = &psb->cur_iocbq.iocb; + iocb->un.fcpi64.bdl.ulpIoTag32 = 0; + if ((phba->sli_rev == 3) && + !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) { + /* fill in immediate fcp command BDE */ + iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED; + iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd); + iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t, + unsli3.fcp_ext.icd); + iocb->un.fcpi64.bdl.addrHigh = 0; + iocb->ulpBdeCount = 0; + iocb->ulpLe = 0; + /* fill in responce BDE */ + iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = + BUFF_TYPE_BDE_64; + iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize = + sizeof(struct fcp_rsp); + iocb->unsli3.fcp_ext.rbde.addrLow = + putPaddrLow(pdma_phys_fcp_rsp); + iocb->unsli3.fcp_ext.rbde.addrHigh = + putPaddrHigh(pdma_phys_fcp_rsp); + } else { + iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64; + iocb->un.fcpi64.bdl.bdeSize = + (2 * sizeof(struct ulp_bde64)); + iocb->un.fcpi64.bdl.addrLow = + putPaddrLow(pdma_phys_bpl); + iocb->un.fcpi64.bdl.addrHigh = + putPaddrHigh(pdma_phys_bpl); + iocb->ulpBdeCount = 1; + iocb->ulpLe = 1; + } + iocb->ulpClass = CLASS3; + psb->status = IOSTAT_SUCCESS; + /* Put it back into the SCSI buffer list */ + lpfc_release_scsi_buf_s4(phba, psb); - /* - * Get memory from the pci pool to map the virt space to pci bus space - * for an I/O. The DMA buffer includes space for the struct fcp_cmnd, - * struct fcp_rsp and the number of bde's necessary to support the - * sg_tablesize. - */ - psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, GFP_KERNEL, - &psb->dma_handle); - if (!psb->data) { - kfree(psb); - return NULL; } - /* Initialize virtual ptrs to dma_buf region. */ - memset(psb->data, 0, phba->cfg_sg_dma_buf_size); + return bcnt; +} - /* Allocate iotag for psb->cur_iocbq. */ - iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq); - if (iotag == 0) { - pci_pool_free(phba->lpfc_scsi_dma_buf_pool, - psb->data, psb->dma_handle); - kfree (psb); - return NULL; +/** + * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort + * @phba: pointer to lpfc hba data structure. + * @axri: pointer to the fcp xri abort wcqe structure. + * + * This routine is invoked by the worker thread to process a SLI4 fast-path + * FCP aborted xri. + **/ +void +lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba, + struct sli4_wcqe_xri_aborted *axri) +{ + uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri); + struct lpfc_scsi_buf *psb, *next_psb; + unsigned long iflag = 0; + + spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag); + list_for_each_entry_safe(psb, next_psb, + &phba->sli4_hba.lpfc_abts_scsi_buf_list, list) { + if (psb->cur_iocbq.sli4_xritag == xri) { + list_del(&psb->list); + psb->status = IOSTAT_SUCCESS; + spin_unlock_irqrestore( + &phba->sli4_hba.abts_scsi_buf_list_lock, + iflag); + lpfc_release_scsi_buf_s4(phba, psb); + return; + } + } + spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock, + iflag); +} + +/** + * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block + * @phba: pointer to lpfc hba data structure. + * + * This routine walks the list of scsi buffers that have been allocated and + * repost them to the HBA by using SGL block post. This is needed after a + * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine + * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list + * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers. + * + * Returns: 0 = success, non-zero failure. + **/ +int +lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba) +{ + struct lpfc_scsi_buf *psb; + int index, status, bcnt = 0, rcnt = 0, rc = 0; + LIST_HEAD(sblist); + + for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) { + psb = phba->sli4_hba.lpfc_scsi_psb_array[index]; + if (psb) { + /* Remove from SCSI buffer list */ + list_del(&psb->list); + /* Add it to a local SCSI buffer list */ + list_add_tail(&psb->list, &sblist); + if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) { + bcnt = rcnt; + rcnt = 0; + } + } else + /* A hole present in the XRI array, need to skip */ + bcnt = rcnt; + + if (index == phba->sli4_hba.scsi_xri_cnt - 1) + /* End of XRI array for SCSI buffer, complete */ + bcnt = rcnt; + + /* Continue until collect up to a nembed page worth of sgls */ + if (bcnt == 0) + continue; + /* Now, post the SCSI buffer list sgls as a block */ + status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt); + /* Reset SCSI buffer count for next round of posting */ + bcnt = 0; + while (!list_empty(&sblist)) { + list_remove_head(&sblist, psb, struct lpfc_scsi_buf, + list); + if (status) { + /* Put this back on the abort scsi list */ + psb->status = IOSTAT_LOCAL_REJECT; + psb->result = IOERR_ABORT_REQUESTED; + rc++; + } else + psb->status = IOSTAT_SUCCESS; + /* Put it back into the SCSI buffer list */ + lpfc_release_scsi_buf_s4(phba, psb); + } } - psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP; + return rc; +} - psb->fcp_cmnd = psb->data; - psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd); - psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) + - sizeof(struct fcp_rsp); +/** + * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec + * @vport: The virtual port for which this call being executed. + * @num_to_allocate: The requested number of buffers to allocate. + * + * This routine allocates a scsi buffer for device with SLI-4 interface spec, + * the scsi buffer contains all the necessary information needed to initiate + * a SCSI I/O. + * + * Return codes: + * int - number of scsi buffers that were allocated. + * 0 = failure, less than num_to_alloc is a partial failure. + **/ +static int +lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) +{ + struct lpfc_hba *phba = vport->phba; + struct lpfc_scsi_buf *psb; + struct sli4_sge *sgl; + IOCB_t *iocb; + dma_addr_t pdma_phys_fcp_cmd; + dma_addr_t pdma_phys_fcp_rsp; + dma_addr_t pdma_phys_bpl, pdma_phys_bpl1; + uint16_t iotag, last_xritag = NO_XRI; + int status = 0, index; + int bcnt; + int non_sequential_xri = 0; + int rc = 0; + LIST_HEAD(sblist); + + for (bcnt = 0; bcnt < num_to_alloc; bcnt++) { + psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL); + if (!psb) + break; - /* Initialize local short-hand pointers. */ - bpl = psb->fcp_bpl; - pdma_phys_fcp_cmd = psb->dma_handle; - pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd); - pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) + - sizeof(struct fcp_rsp); + /* + * Get memory from the pci pool to map the virt space to pci bus + * space for an I/O. The DMA buffer includes space for the + * struct fcp_cmnd, struct fcp_rsp and the number of bde's + * necessary to support the sg_tablesize. + */ + psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, + GFP_KERNEL, &psb->dma_handle); + if (!psb->data) { + kfree(psb); + break; + } - /* - * The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg - * list bdes. Initialize the first two and leave the rest for - * queuecommand. - */ - bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd)); - bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd)); - bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd); - bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64; - bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w); - - /* Setup the physical region for the FCP RSP */ - bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp)); - bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp)); - bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp); - bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64; - bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w); + /* Initialize virtual ptrs to dma_buf region. */ + memset(psb->data, 0, phba->cfg_sg_dma_buf_size); - /* - * Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf, - * initialize it with all known data now. - */ - iocb = &psb->cur_iocbq.iocb; - iocb->un.fcpi64.bdl.ulpIoTag32 = 0; - if ((phba->sli_rev == 3) && - !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) { - /* fill in immediate fcp command BDE */ - iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED; + /* Allocate iotag for psb->cur_iocbq. */ + iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq); + if (iotag == 0) { + kfree(psb); + break; + } + + psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba); + if (psb->cur_iocbq.sli4_xritag == NO_XRI) { + pci_pool_free(phba->lpfc_scsi_dma_buf_pool, + psb->data, psb->dma_handle); + kfree(psb); + break; + } + if (last_xritag != NO_XRI + && psb->cur_iocbq.sli4_xritag != (last_xritag+1)) { + non_sequential_xri = 1; + } else + list_add_tail(&psb->list, &sblist); + last_xritag = psb->cur_iocbq.sli4_xritag; + + index = phba->sli4_hba.scsi_xri_cnt++; + psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP; + + psb->fcp_bpl = psb->data; + psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size) + - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd + + sizeof(struct fcp_cmnd)); + + /* Initialize local short-hand pointers. */ + sgl = (struct sli4_sge *)psb->fcp_bpl; + pdma_phys_bpl = psb->dma_handle; + pdma_phys_fcp_cmd = + (psb->dma_handle + phba->cfg_sg_dma_buf_size) + - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd); + + /* + * The first two bdes are the FCP_CMD and FCP_RSP. The balance + * are sg list bdes. Initialize the first two and leave the + * rest for queuecommand. + */ + sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd)); + sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd)); + bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_cmnd)); + bf_set(lpfc_sli4_sge_last, sgl, 0); + sgl->word2 = cpu_to_le32(sgl->word2); + sgl->word3 = cpu_to_le32(sgl->word3); + sgl++; + + /* Setup the physical region for the FCP RSP */ + sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp)); + sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp)); + bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_rsp)); + bf_set(lpfc_sli4_sge_last, sgl, 1); + sgl->word2 = cpu_to_le32(sgl->word2); + sgl->word3 = cpu_to_le32(sgl->word3); + + /* + * Since the IOCB for the FCP I/O is built into this + * lpfc_scsi_buf, initialize it with all known data now. + */ + iocb = &psb->cur_iocbq.iocb; + iocb->un.fcpi64.bdl.ulpIoTag32 = 0; + iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64; + /* setting the BLP size to 2 * sizeof BDE may not be correct. + * We are setting the bpl to point to out sgl. An sgl's + * entries are 16 bytes, a bpl entries are 12 bytes. + */ iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd); - iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t, - unsli3.fcp_ext.icd); - iocb->un.fcpi64.bdl.addrHigh = 0; - iocb->ulpBdeCount = 0; - iocb->ulpLe = 0; - /* fill in responce BDE */ - iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64; - iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize = - sizeof(struct fcp_rsp); - iocb->unsli3.fcp_ext.rbde.addrLow = - putPaddrLow(pdma_phys_fcp_rsp); - iocb->unsli3.fcp_ext.rbde.addrHigh = - putPaddrHigh(pdma_phys_fcp_rsp); - } else { - iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64; - iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64)); - iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_bpl); - iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_bpl); + iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd); + iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd); iocb->ulpBdeCount = 1; iocb->ulpLe = 1; + iocb->ulpClass = CLASS3; + if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE) + pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE; + else + pdma_phys_bpl1 = 0; + psb->dma_phys_bpl = pdma_phys_bpl; + phba->sli4_hba.lpfc_scsi_psb_array[index] = psb; + if (non_sequential_xri) { + status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl, + pdma_phys_bpl1, + psb->cur_iocbq.sli4_xritag); + if (status) { + /* Put this back on the abort scsi list */ + psb->status = IOSTAT_LOCAL_REJECT; + psb->result = IOERR_ABORT_REQUESTED; + rc++; + } else + psb->status = IOSTAT_SUCCESS; + /* Put it back into the SCSI buffer list */ + lpfc_release_scsi_buf_s4(phba, psb); + break; + } + } + if (bcnt) { + status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt); + /* Reset SCSI buffer count for next round of posting */ + while (!list_empty(&sblist)) { + list_remove_head(&sblist, psb, struct lpfc_scsi_buf, + list); + if (status) { + /* Put this back on the abort scsi list */ + psb->status = IOSTAT_LOCAL_REJECT; + psb->result = IOERR_ABORT_REQUESTED; + rc++; + } else + psb->status = IOSTAT_SUCCESS; + /* Put it back into the SCSI buffer list */ + lpfc_release_scsi_buf_s4(phba, psb); + } } - iocb->ulpClass = CLASS3; - return psb; + return bcnt + non_sequential_xri - rc; } /** - * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba - * @phba: The Hba for which this call is being executed. + * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator + * @vport: The virtual port for which this call being executed. + * @num_to_allocate: The requested number of buffers to allocate. + * + * This routine wraps the actual SCSI buffer allocator function pointer from + * the lpfc_hba struct. + * + * Return codes: + * int - number of scsi buffers that were allocated. + * 0 = failure, less than num_to_alloc is a partial failure. + **/ +static inline int +lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc) +{ + return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc); +} + +/** + * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA + * @phba: The HBA for which this call is being executed. * * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list * and returns to caller. @@ -591,7 +890,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba) } /** - * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list + * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list * @phba: The Hba for which this call is being executed. * @psb: The scsi buffer which is being released. * @@ -599,7 +898,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba) * lpfc_scsi_buf_list list. **/ static void -lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) +lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) { unsigned long iflag = 0; @@ -610,21 +909,69 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) } /** - * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer + * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list. + * @phba: The Hba for which this call is being executed. + * @psb: The scsi buffer which is being released. + * + * This routine releases @psb scsi buffer by adding it to tail of @phba + * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer + * and cannot be reused for at least RA_TOV amount of time if it was + * aborted. + **/ +static void +lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) +{ + unsigned long iflag = 0; + + if (psb->status == IOSTAT_LOCAL_REJECT + && psb->result == IOERR_ABORT_REQUESTED) { + spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, + iflag); + psb->pCmd = NULL; + list_add_tail(&psb->list, + &phba->sli4_hba.lpfc_abts_scsi_buf_list); + spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock, + iflag); + } else { + + spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); + psb->pCmd = NULL; + list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list); + spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag); + } +} + +/** + * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list. + * @phba: The Hba for which this call is being executed. + * @psb: The scsi buffer which is being released. + * + * This routine releases @psb scsi buffer by adding it to tail of @phba + * lpfc_scsi_buf_list list. + **/ +static void +lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) +{ + + phba->lpfc_release_scsi_buf(phba, psb); +} + +/** + * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec * @phba: The Hba for which this call is being executed. * @lpfc_cmd: The scsi buffer which is going to be mapped. * * This routine does the pci dma mapping for scatter-gather list of scsi cmnd - * field of @lpfc_cmd. This routine scans through sg elements and format the - * bdea. This routine also initializes all IOCB fields which are dependent on - * scsi command request buffer. + * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans + * through sg elements and format the bdea. This routine also initializes all + * IOCB fields which are dependent on scsi command request buffer. * * Return codes: * 1 - Error * 0 - Success **/ static int -lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) +lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) { struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd; struct scatterlist *sgel = NULL; @@ -1412,6 +1759,133 @@ out: } /** + * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec + * @phba: The Hba for which this call is being executed. + * @lpfc_cmd: The scsi buffer which is going to be mapped. + * + * This routine does the pci dma mapping for scatter-gather list of scsi cmnd + * field of @lpfc_cmd for device with SLI-4 interface spec. + * + * Return codes: + * 1 - Error + * 0 - Success + **/ +static int +lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) +{ + struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd; + struct scatterlist *sgel = NULL; + struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd; + struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl; + IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb; + dma_addr_t physaddr; + uint32_t num_bde = 0; + uint32_t dma_len; + uint32_t dma_offset = 0; + int nseg; + + /* + * There are three possibilities here - use scatter-gather segment, use + * the single mapping, or neither. Start the lpfc command prep by + * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first + * data bde entry. + */ + if (scsi_sg_count(scsi_cmnd)) { + /* + * The driver stores the segment count returned from pci_map_sg + * because this a count of dma-mappings used to map the use_sg + * pages. They are not guaranteed to be the same for those + * architectures that implement an IOMMU. + */ + + nseg = scsi_dma_map(scsi_cmnd); + if (unlikely(!nseg)) + return 1; + sgl += 1; + /* clear the last flag in the fcp_rsp map entry */ + sgl->word2 = le32_to_cpu(sgl->word2); + bf_set(lpfc_sli4_sge_last, sgl, 0); + sgl->word2 = cpu_to_le32(sgl->word2); + sgl += 1; + + lpfc_cmd->seg_cnt = nseg; + if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) { + printk(KERN_ERR "%s: Too many sg segments from " + "dma_map_sg. Config %d, seg_cnt %d\n", + __func__, phba->cfg_sg_seg_cnt, + lpfc_cmd->seg_cnt); + scsi_dma_unmap(scsi_cmnd); + return 1; + } + + /* + * The driver established a maximum scatter-gather segment count + * during probe that limits the number of sg elements in any + * single scsi command. Just run through the seg_cnt and format + * the sge's. + * When using SLI-3 the driver will try to fit all the BDEs into + * the IOCB. If it can't then the BDEs get added to a BPL as it + * does for SLI-2 mode. + */ + scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) { + physaddr = sg_dma_address(sgel); + dma_len = sg_dma_len(sgel); + bf_set(lpfc_sli4_sge_len, sgl, sg_dma_len(sgel)); + sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr)); + sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr)); + if ((num_bde + 1) == nseg) + bf_set(lpfc_sli4_sge_last, sgl, 1); + else + bf_set(lpfc_sli4_sge_last, sgl, 0); + bf_set(lpfc_sli4_sge_offset, sgl, dma_offset); + sgl->word2 = cpu_to_le32(sgl->word2); + sgl->word3 = cpu_to_le32(sgl->word3); + dma_offset += dma_len; + sgl++; + } + } else { + sgl += 1; + /* clear the last flag in the fcp_rsp map entry */ + sgl->word2 = le32_to_cpu(sgl->word2); + bf_set(lpfc_sli4_sge_last, sgl, 1); + sgl->word2 = cpu_to_le32(sgl->word2); + } + + /* + * Finish initializing those IOCB fields that are dependent on the + * scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is + * explicitly reinitialized. + * all iocb memory resources are reused. + */ + fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd)); + + /* + * Due to difference in data length between DIF/non-DIF paths, + * we need to set word 4 of IOCB here + */ + iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd); + return 0; +} + +/** + * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer + * @phba: The Hba for which this call is being executed. + * @lpfc_cmd: The scsi buffer which is going to be mapped. + * + * This routine wraps the actual DMA mapping function pointer from the + * lpfc_hba struct. + * + * Return codes: + * 1 - Error + * 0 - Success + **/ +static inline int +lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) +{ + return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd); +} + +/** * lpfc_send_scsi_error_event - Posts an event when there is SCSI error * @phba: Pointer to hba context object. * @vport: Pointer to vport object. @@ -1504,15 +1978,15 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport, } /** - * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather - * @phba: The Hba for which this call is being executed. + * lpfc_scsi_unprep_dma_buf_s3 - Un-map DMA mapping of SG-list for SLI3 dev + * @phba: The HBA for which this call is being executed. * @psb: The scsi buffer which is going to be un-mapped. * * This routine does DMA un-mapping of scatter gather list of scsi command - * field of @lpfc_cmd. + * field of @lpfc_cmd for device with SLI-3 interface spec. **/ static void -lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb) +lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) { /* * There are only two special cases to consider. (1) the scsi command @@ -1529,6 +2003,36 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb) } /** + * lpfc_scsi_unprep_dma_buf_s4 - Un-map DMA mapping of SG-list for SLI4 dev + * @phba: The Hba for which this call is being executed. + * @psb: The scsi buffer which is going to be un-mapped. + * + * This routine does DMA un-mapping of scatter gather list of scsi command + * field of @lpfc_cmd for device with SLI-4 interface spec. If we have to + * remove the sgl for this scsi buffer then we will do it here. For now + * we should be able to just call the sli3 unprep routine. + **/ +static void +lpfc_scsi_unprep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) +{ + lpfc_scsi_unprep_dma_buf_s3(phba, psb); +} + +/** + * lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list + * @phba: The Hba for which this call is being executed. + * @psb: The scsi buffer which is going to be un-mapped. + * + * This routine does DMA un-mapping of scatter gather list of scsi command + * field of @lpfc_cmd for device with SLI-4 interface spec. + **/ +static void +lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) +{ + phba->lpfc_scsi_unprep_dma_buf(phba, psb); +} + +/** * lpfc_handler_fcp_err - FCP response handler * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. @@ -1676,7 +2180,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine * @phba: The Hba for which this call is being executed. * @pIocbIn: The command IOCBQ for the scsi cmnd. - * @pIocbOut: The response IOCBQ for the scsi cmnd . + * @pIocbOut: The response IOCBQ for the scsi cmnd. * * This routine assigns scsi command result by looking into response IOCB * status field appropriately. This routine handles QUEUE FULL condition as @@ -1957,16 +2461,16 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd) } /** - * lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit + * lpfc_scsi_prep_cmnd_s3 - Convert scsi cmnd to FCP infor unit for SLI3 dev * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: The scsi command which needs to send. * @pnode: Pointer to lpfc_nodelist. * * This routine initializes fcp_cmnd and iocb data structure from scsi command - * to transfer. + * to transfer for device with SLI3 interface spec. **/ static void -lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, +lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_nodelist *pnode) { struct lpfc_hba *phba = vport->phba; @@ -2013,8 +2517,11 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, if (scsi_sg_count(scsi_cmnd)) { if (datadir == DMA_TO_DEVICE) { iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR; - iocb_cmd->un.fcpi.fcpi_parm = 0; - iocb_cmd->ulpPU = 0; + if (phba->sli_rev < LPFC_SLI_REV4) { + iocb_cmd->un.fcpi.fcpi_parm = 0; + iocb_cmd->ulpPU = 0; + } else + iocb_cmd->ulpPU = PARM_READ_CHECK; fcp_cmnd->fcpCntl3 = WRITE_DATA; phba->fc4OutputRequests++; } else { @@ -2051,20 +2558,60 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, } /** - * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit + * lpfc_scsi_prep_cmnd_s4 - Convert scsi cmnd to FCP infor unit for SLI4 dev + * @vport: The virtual port for which this call is being executed. + * @lpfc_cmd: The scsi command which needs to send. + * @pnode: Pointer to lpfc_nodelist. + * + * This routine initializes fcp_cmnd and iocb data structure from scsi command + * to transfer for device with SLI4 interface spec. + **/ +static void +lpfc_scsi_prep_cmnd_s4(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, + struct lpfc_nodelist *pnode) +{ + /* + * The prep cmnd routines do not touch the sgl or its + * entries. We may not have to do anything different. + * I will leave this function in place until we can + * run some IO through the driver and determine if changes + * are needed. + */ + return lpfc_scsi_prep_cmnd_s3(vport, lpfc_cmd, pnode); +} + +/** + * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit + * @vport: The virtual port for which this call is being executed. + * @lpfc_cmd: The scsi command which needs to send. + * @pnode: Pointer to lpfc_nodelist. + * + * This routine wraps the actual convert SCSI cmnd function pointer from + * the lpfc_hba struct. + **/ +static inline void +lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, + struct lpfc_nodelist *pnode) +{ + vport->phba->lpfc_scsi_prep_cmnd(vport, lpfc_cmd, pnode); +} + +/** + * lpfc_scsi_prep_task_mgmt_cmnd_s3 - Convert SLI3 scsi TM cmd to FCP info unit * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. * @lun: Logical unit number. * @task_mgmt_cmd: SCSI task management command. * - * This routine creates FCP information unit corresponding to @task_mgmt_cmd. + * This routine creates FCP information unit corresponding to @task_mgmt_cmd + * for device with SLI-3 interface spec. * * Return codes: * 0 - Error * 1 - Success **/ static int -lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, +lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, unsigned int lun, uint8_t task_mgmt_cmd) @@ -2114,6 +2661,107 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, } /** + * lpfc_scsi_prep_task_mgmt_cmnd_s4 - Convert SLI4 scsi TM cmd to FCP info unit + * @vport: The virtual port for which this call is being executed. + * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. + * @lun: Logical unit number. + * @task_mgmt_cmd: SCSI task management command. + * + * This routine creates FCP information unit corresponding to @task_mgmt_cmd + * for device with SLI-4 interface spec. + * + * Return codes: + * 0 - Error + * 1 - Success + **/ +static int +lpfc_scsi_prep_task_mgmt_cmd_s4(struct lpfc_vport *vport, + struct lpfc_scsi_buf *lpfc_cmd, + unsigned int lun, + uint8_t task_mgmt_cmd) +{ + /* + * The prep cmnd routines do not touch the sgl or its + * entries. We may not have to do anything different. + * I will leave this function in place until we can + * run some IO through the driver and determine if changes + * are needed. + */ + return lpfc_scsi_prep_task_mgmt_cmd_s3(vport, lpfc_cmd, lun, + task_mgmt_cmd); +} + +/** + * lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info + * @vport: The virtual port for which this call is being executed. + * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. + * @lun: Logical unit number. + * @task_mgmt_cmd: SCSI task management command. + * + * This routine wraps the actual convert SCSI TM to FCP information unit + * function pointer from the lpfc_hba struct. + * + * Return codes: + * 0 - Error + * 1 - Success + **/ +static inline int +lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, + struct lpfc_scsi_buf *lpfc_cmd, + unsigned int lun, + uint8_t task_mgmt_cmd) +{ + struct lpfc_hba *phba = vport->phba; + + return phba->lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun, + task_mgmt_cmd); +} + +/** + * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table + * @phba: The hba struct for which this call is being executed. + * @dev_grp: The HBA PCI-Device group number. + * + * This routine sets up the SCSI interface API function jump table in @phba + * struct. + * Returns: 0 - success, -ENODEV - failure. + **/ +int +lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp) +{ + + switch (dev_grp) { + case LPFC_PCI_DEV_LP: + phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3; + phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3; + phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s3; + phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s3; + phba->lpfc_scsi_prep_task_mgmt_cmd = + lpfc_scsi_prep_task_mgmt_cmd_s3; + phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3; + break; + case LPFC_PCI_DEV_OC: + phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4; + phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4; + phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s4; + phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s4; + phba->lpfc_scsi_prep_task_mgmt_cmd = + lpfc_scsi_prep_task_mgmt_cmd_s4; + phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4; + break; + default: + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "1418 Invalid HBA PCI-device group: 0x%x\n", + dev_grp); + return -ENODEV; + break; + } + phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf; + phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth; + return 0; +} + +/** * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command * @phba: The Hba for which this call is being executed. * @cmdiocbq: Pointer to lpfc_iocbq data structure. @@ -2178,9 +2826,8 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport, lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, "0702 Issue Target Reset to TGT %d Data: x%x x%x\n", tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag); - status = lpfc_sli_issue_iocb_wait(phba, - &phba->sli.ring[phba->sli.fcp_ring], - iocbq, iocbqrsp, lpfc_cmd->timeout); + status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING, + iocbq, iocbqrsp, lpfc_cmd->timeout); if (status != IOCB_SUCCESS) { if (status == IOCB_TIMEDOUT) { iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl; @@ -2305,7 +2952,6 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) struct Scsi_Host *shost = cmnd->device->host; struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; - struct lpfc_sli *psli = &phba->sli; struct lpfc_rport_data *rdata = cmnd->device->hostdata; struct lpfc_nodelist *ndlp = rdata->pnode; struct lpfc_scsi_buf *lpfc_cmd; @@ -2427,7 +3073,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp); atomic_inc(&ndlp->cmd_pending); - err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring], + err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB); if (err) { atomic_dec(&ndlp->cmd_pending); @@ -2490,7 +3136,6 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) struct Scsi_Host *shost = cmnd->device->host; struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; - struct lpfc_sli_ring *pring = &phba->sli.ring[phba->sli.fcp_ring]; struct lpfc_iocbq *iocb; struct lpfc_iocbq *abtsiocb; struct lpfc_scsi_buf *lpfc_cmd; @@ -2531,7 +3176,10 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) icmd = &abtsiocb->iocb; icmd->un.acxri.abortType = ABORT_TYPE_ABTS; icmd->un.acxri.abortContextTag = cmd->ulpContext; - icmd->un.acxri.abortIoTag = cmd->ulpIoTag; + if (phba->sli_rev == LPFC_SLI_REV4) + icmd->un.acxri.abortIoTag = iocb->sli4_xritag; + else + icmd->un.acxri.abortIoTag = cmd->ulpIoTag; icmd->ulpLe = 1; icmd->ulpClass = cmd->ulpClass; @@ -2542,7 +3190,8 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl; abtsiocb->vport = vport; - if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) == IOCB_ERROR) { + if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) == + IOCB_ERROR) { lpfc_sli_release_iocbq(phba, abtsiocb); ret = FAILED; goto out; @@ -2668,8 +3317,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd) "0703 Issue target reset to TGT %d LUN %d " "rpi x%x nlp_flag x%x\n", cmnd->device->id, cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag); - status = lpfc_sli_issue_iocb_wait(phba, - &phba->sli.ring[phba->sli.fcp_ring], + status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING, iocbq, iocbqrsp, lpfc_cmd->timeout); if (status == IOCB_TIMEDOUT) { iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl; @@ -2825,11 +3473,10 @@ lpfc_slave_alloc(struct scsi_device *sdev) { struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata; struct lpfc_hba *phba = vport->phba; - struct lpfc_scsi_buf *scsi_buf = NULL; struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); - uint32_t total = 0, i; + uint32_t total = 0; uint32_t num_to_alloc = 0; - unsigned long flags; + int num_allocated = 0; if (!rport || fc_remote_port_chkready(rport)) return -ENXIO; @@ -2863,20 +3510,13 @@ lpfc_slave_alloc(struct scsi_device *sdev) (phba->cfg_hba_queue_depth - total)); num_to_alloc = phba->cfg_hba_queue_depth - total; } - - for (i = 0; i < num_to_alloc; i++) { - scsi_buf = lpfc_new_scsi_buf(vport); - if (!scsi_buf) { - lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, - "0706 Failed to allocate " - "command buffer\n"); - break; - } - - spin_lock_irqsave(&phba->scsi_buf_list_lock, flags); - phba->total_scsi_bufs++; - list_add_tail(&scsi_buf->list, &phba->lpfc_scsi_buf_list); - spin_unlock_irqrestore(&phba->scsi_buf_list_lock, flags); + num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc); + if (num_to_alloc != num_allocated) { + lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, + "0708 Allocation request of %d " + "command buffers did not succeed. " + "Allocated %d buffers.\n", + num_to_alloc, num_allocated); } return 0; } |