diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/gadget/zero.c | 237 |
1 files changed, 96 insertions, 141 deletions
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index fcfe869..ff54087 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -1,38 +1,22 @@ /* * zero.c -- Gadget Zero, for USB development * - * Copyright (C) 2003-2004 David Brownell + * Copyright (C) 2003-2007 David Brownell * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ @@ -57,30 +41,18 @@ * Many drivers will only have one configuration, letting them be much * simpler if they also don't support high speed operation (like this * driver does). + * + * Why is *this* driver using two configurations, rather than setting up + * two interfaces with different functions? To help verify that multiple + * configuration infrastucture is working correctly; also, so that it can + * work with low capability USB controllers without four bulk endpoints. */ -#define DEBUG 1 -// #define VERBOSE +/* #define VERBOSE_DEBUG */ -#include <linux/module.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/timer.h> -#include <linux/list.h> -#include <linux/interrupt.h> #include <linux/utsname.h> #include <linux/device.h> -#include <linux/moduleparam.h> - -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <asm/unaligned.h> #include <linux/usb/ch9.h> #include <linux/usb_gadget.h> @@ -90,7 +62,7 @@ /*-------------------------------------------------------------------------*/ -#define DRIVER_VERSION "St Patrick's Day 2004" +#define DRIVER_VERSION "Lughnasadh, 2007" static const char shortname [] = "zero"; static const char longname [] = "Gadget Zero"; @@ -131,30 +103,16 @@ struct zero_dev { struct timer_list resume; }; -#define xprintk(d,level,fmt,args...) \ - dev_printk(level , &(d)->gadget->dev , fmt , ## args) - -#ifdef DEBUG -#define DBG(dev,fmt,args...) \ - xprintk(dev , KERN_DEBUG , fmt , ## args) -#else -#define DBG(dev,fmt,args...) \ - do { } while (0) -#endif /* DEBUG */ - -#ifdef VERBOSE -#define VDBG DBG -#else -#define VDBG(dev,fmt,args...) \ - do { } while (0) -#endif /* VERBOSE */ - -#define ERROR(dev,fmt,args...) \ - xprintk(dev , KERN_ERR , fmt , ## args) -#define WARN(dev,fmt,args...) \ - xprintk(dev , KERN_WARNING , fmt , ## args) -#define INFO(dev,fmt,args...) \ - xprintk(dev , KERN_INFO , fmt , ## args) +#define DBG(d, fmt, args...) \ + dev_dbg(&(d)->gadget->dev , fmt , ## args) +#define VDBG(d, fmt, args...) \ + dev_vdbg(&(d)->gadget->dev , fmt , ## args) +#define ERROR(d, fmt, args...) \ + dev_err(&(d)->gadget->dev , fmt , ## args) +#define WARN(d, fmt, args...) \ + dev_warn(&(d)->gadget->dev , fmt , ## args) +#define INFO(d, fmt, args...) \ + dev_info(&(d)->gadget->dev , fmt , ## args) /*-------------------------------------------------------------------------*/ @@ -326,8 +284,6 @@ static const struct usb_descriptor_header *fs_loopback_function [] = { NULL, }; -#ifdef CONFIG_USB_GADGET_DUALSPEED - /* * usb 2.0 devices need to expose both high speed and full speed * descriptors, unless they only run at full speed. @@ -383,17 +339,20 @@ static const struct usb_descriptor_header *hs_loopback_function [] = { }; /* maxpacket and other transfer characteristics vary by speed. */ -#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) - -#else +static inline struct usb_endpoint_descriptor * +ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs, + struct usb_endpoint_descriptor *fs) +{ + if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + return hs; + return fs; +} -/* if there's no high speed support, maxpacket doesn't change. */ -#define ep_desc(g,hs,fs) fs +static char manufacturer[50]; -#endif /* !CONFIG_USB_GADGET_DUALSPEED */ +/* default serial number takes at least two packets */ +static char serial[] = "0123456789.0123456789.0123456789"; -static char manufacturer [50]; -static char serial [40]; /* static strings, in UTF-8 */ static struct usb_string strings [] = { @@ -435,30 +394,29 @@ config_buf (struct usb_gadget *gadget, int is_source_sink; int len; const struct usb_descriptor_header **function; -#ifdef CONFIG_USB_GADGET_DUALSPEED - int hs = (gadget->speed == USB_SPEED_HIGH); -#endif + int hs = 0; /* two configurations will always be index 0 and index 1 */ if (index > 1) return -EINVAL; is_source_sink = loopdefault ? (index == 1) : (index == 0); -#ifdef CONFIG_USB_GADGET_DUALSPEED - if (type == USB_DT_OTHER_SPEED_CONFIG) - hs = !hs; + if (gadget_is_dualspeed(gadget)) { + hs = (gadget->speed == USB_SPEED_HIGH); + if (type == USB_DT_OTHER_SPEED_CONFIG) + hs = !hs; + } if (hs) function = is_source_sink ? hs_source_sink_function : hs_loopback_function; else -#endif function = is_source_sink ? fs_source_sink_function : fs_loopback_function; /* for now, don't advertise srp-only devices */ - if (!gadget->is_otg) + if (!gadget_is_otg(gadget)) function++; len = usb_gadget_config_buf (is_source_sink @@ -498,6 +456,19 @@ static void free_ep_req (struct usb_ep *ep, struct usb_request *req) /*-------------------------------------------------------------------------*/ +/* + * SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripherals, + * this just sinks bulk packets OUT to the peripheral and sources them IN + * to the host, optionally with specific data patterns. + * + * In terms of control messaging, this supports all the standard requests + * plus two that support control-OUT tests. + * + * Note that because this doesn't queue more than one request at a time, + * some other function must be used to test queueing logic. The network + * link (g_ether) is probably the best option for that. + */ + /* optionally require specific source/sink data patterns */ static int @@ -534,12 +505,7 @@ check_read_data ( return 0; } -static void -reinit_write_data ( - struct zero_dev *dev, - struct usb_ep *ep, - struct usb_request *req -) +static void reinit_write_data(struct usb_ep *ep, struct usb_request *req) { unsigned i; u8 *buf = req->buf; @@ -566,16 +532,16 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req) switch (status) { - case 0: /* normal completion? */ + case 0: /* normal completion? */ if (ep == dev->out_ep) { check_read_data (dev, ep, req); memset (req->buf, 0x55, req->length); } else - reinit_write_data (dev, ep, req); + reinit_write_data(ep, req); break; /* this endpoint is normally active while we're configured */ - case -ECONNABORTED: /* hardware forced ep reset */ + case -ECONNABORTED: /* hardware forced ep reset */ case -ECONNRESET: /* request dequeued */ case -ESHUTDOWN: /* disconnect from host */ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status, @@ -607,8 +573,7 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req) } } -static struct usb_request * -source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags) +static struct usb_request *source_sink_start_ep(struct usb_ep *ep) { struct usb_request *req; int status; @@ -621,11 +586,11 @@ source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags) req->complete = source_sink_complete; if (strcmp (ep->name, EP_IN_NAME) == 0) - reinit_write_data (ep->driver_data, ep, req); + reinit_write_data(ep, req); else memset (req->buf, 0x55, req->length); - status = usb_ep_queue (ep, req, gfp_flags); + status = usb_ep_queue(ep, req, GFP_ATOMIC); if (status) { struct zero_dev *dev = ep->driver_data; @@ -637,8 +602,7 @@ source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags) return req; } -static int -set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags) +static int set_source_sink_config(struct zero_dev *dev) { int result = 0; struct usb_ep *ep; @@ -653,8 +617,7 @@ set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags) result = usb_ep_enable (ep, d); if (result == 0) { ep->driver_data = dev; - if (source_sink_start_ep(ep, gfp_flags) - != NULL) { + if (source_sink_start_ep(ep) != NULL) { dev->in_ep = ep; continue; } @@ -668,8 +631,7 @@ set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags) result = usb_ep_enable (ep, d); if (result == 0) { ep->driver_data = dev; - if (source_sink_start_ep(ep, gfp_flags) - != NULL) { + if (source_sink_start_ep(ep) != NULL) { dev->out_ep = ep; continue; } @@ -701,7 +663,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req) switch (status) { - case 0: /* normal completion? */ + case 0: /* normal completion? */ if (ep == dev->out_ep) { /* loop this OUT packet back IN to the host */ req->zero = (req->actual < req->length); @@ -735,7 +697,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req) * rely on the hardware driver to clean up on disconnect or * endpoint disable. */ - case -ECONNABORTED: /* hardware forced ep reset */ + case -ECONNABORTED: /* hardware forced ep reset */ case -ECONNRESET: /* request dequeued */ case -ESHUTDOWN: /* disconnect from host */ free_ep_req (ep, req); @@ -743,8 +705,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req) } } -static int -set_loopback_config (struct zero_dev *dev, gfp_t gfp_flags) +static int set_loopback_config(struct zero_dev *dev) { int result = 0; struct usb_ep *ep; @@ -844,8 +805,7 @@ static void zero_reset_config (struct zero_dev *dev) * code can do, perhaps by disallowing more than one configuration or * by limiting configuration choices (like the pxa2xx). */ -static int -zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags) +static int zero_set_config(struct zero_dev *dev, unsigned number) { int result = 0; struct usb_gadget *gadget = dev->gadget; @@ -855,17 +815,17 @@ zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags) if (gadget_is_sa1100 (gadget) && dev->config) { /* tx fifo is full, but we can't clear it...*/ - INFO (dev, "can't change configurations\n"); + ERROR(dev, "can't change configurations\n"); return -ESPIPE; } zero_reset_config (dev); switch (number) { case CONFIG_SOURCE_SINK: - result = set_source_sink_config (dev, gfp_flags); + result = set_source_sink_config(dev); break; case CONFIG_LOOPBACK: - result = set_loopback_config (dev, gfp_flags); + result = set_loopback_config(dev); break; default: result = -EINVAL; @@ -885,7 +845,7 @@ zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags) case USB_SPEED_LOW: speed = "low"; break; case USB_SPEED_FULL: speed = "full"; break; case USB_SPEED_HIGH: speed = "high"; break; - default: speed = "?"; break; + default: speed = "?"; break; } dev->config = number; @@ -938,19 +898,17 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) value = min (w_length, (u16) sizeof device_desc); memcpy (req->buf, &device_desc, value); break; -#ifdef CONFIG_USB_GADGET_DUALSPEED case USB_DT_DEVICE_QUALIFIER: - if (!gadget->is_dualspeed) + if (!gadget_is_dualspeed(gadget)) break; value = min (w_length, (u16) sizeof dev_qualifier); memcpy (req->buf, &dev_qualifier, value); break; case USB_DT_OTHER_SPEED_CONFIG: - if (!gadget->is_dualspeed) + if (!gadget_is_dualspeed(gadget)) break; // FALLTHROUGH -#endif /* CONFIG_USB_GADGET_DUALSPEED */ case USB_DT_CONFIG: value = config_buf (gadget, req->buf, w_value >> 8, @@ -984,7 +942,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) else VDBG (dev, "HNP inactive\n"); spin_lock (&dev->lock); - value = zero_set_config (dev, w_value, GFP_ATOMIC); + value = zero_set_config(dev, w_value); spin_unlock (&dev->lock); break; case USB_REQ_GET_CONFIGURATION: @@ -1013,7 +971,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) * use this "reset the config" shortcut. */ zero_reset_config (dev); - zero_set_config (dev, config, GFP_ATOMIC); + zero_set_config(dev, config); value = 0; } spin_unlock (&dev->lock); @@ -1163,7 +1121,7 @@ autoconf_fail: } EP_IN_NAME = ep->name; ep->driver_data = ep; /* claim */ - + ep = usb_ep_autoconfig (gadget, &fs_sink_desc); if (!ep) goto autoconf_fail; @@ -1207,16 +1165,18 @@ autoconf_fail: device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; -#ifdef CONFIG_USB_GADGET_DUALSPEED - /* assume ep0 uses the same value for both speeds ... */ - dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; + if (gadget_is_dualspeed(gadget)) { + /* assume ep0 uses the same value for both speeds ... */ + dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; - /* and that all endpoints are dual-speed */ - hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; - hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; -#endif + /* and that all endpoints are dual-speed */ + hs_source_desc.bEndpointAddress = + fs_source_desc.bEndpointAddress; + hs_sink_desc.bEndpointAddress = + fs_sink_desc.bEndpointAddress; + } - if (gadget->is_otg) { + if (gadget_is_otg(gadget)) { otg_descriptor.bmAttributes |= USB_OTG_HNP, source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; @@ -1294,23 +1254,18 @@ static struct usb_gadget_driver zero_driver = { .suspend = zero_suspend, .resume = zero_resume, - .driver = { + .driver = { .name = (char *) shortname, .owner = THIS_MODULE, }, }; -MODULE_AUTHOR ("David Brownell"); -MODULE_LICENSE ("Dual BSD/GPL"); +MODULE_AUTHOR("David Brownell"); +MODULE_LICENSE("GPL"); static int __init init (void) { - /* a real value would likely come through some id prom - * or module option. this one takes at least two packets. - */ - strlcpy (serial, "0123456789.0123456789.0123456789", sizeof serial); - return usb_gadget_register_driver (&zero_driver); } module_init (init); |