diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/input/keyboard/pxa27x_keypad.c | 246 |
1 files changed, 242 insertions, 4 deletions
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 5b2d876..533fd6c 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -118,6 +118,229 @@ struct pxa27x_keypad { unsigned int direct_key_mask; }; +#ifdef CONFIG_OF +static int pxa27x_keypad_matrix_key_parse_dt(struct pxa27x_keypad *keypad) +{ + struct input_dev *input_dev = keypad->input_dev; + struct device *dev = input_dev->dev.parent; + struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + u32 rows, cols; + int error; + + error = matrix_keypad_parse_of_params(dev, &rows, &cols); + if (error) + return error; + + if (rows > MAX_MATRIX_KEY_ROWS || cols > MAX_MATRIX_KEY_COLS) { + dev_err(dev, "rows or cols exceeds maximum value\n"); + return -EINVAL; + } + + pdata->matrix_key_rows = rows; + pdata->matrix_key_cols = cols; + + error = matrix_keypad_build_keymap(NULL, NULL, + pdata->matrix_key_rows, + pdata->matrix_key_cols, + keypad->keycodes, input_dev); + if (error) + return error; + + return 0; +} + +static int pxa27x_keypad_direct_key_parse_dt(struct pxa27x_keypad *keypad) +{ + struct input_dev *input_dev = keypad->input_dev; + struct device *dev = input_dev->dev.parent; + struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + struct device_node *np = dev->of_node; + const __be16 *prop; + unsigned short code; + unsigned int proplen, size; + int i; + int error; + + error = of_property_read_u32(np, "marvell,direct-key-count", + &pdata->direct_key_num); + if (error) { + /* + * If do not have marvel,direct-key-count defined, + * it means direct key is not supported. + */ + return error == -EINVAL ? 0 : error; + } + + error = of_property_read_u32(np, "marvell,direct-key-mask", + &pdata->direct_key_mask); + if (error) { + if (error != -EINVAL) + return error; + + /* + * If marvell,direct-key-mask is not defined, driver will use + * default value. Default value is set when configure the keypad. + */ + pdata->direct_key_mask = 0; + } + + pdata->direct_key_low_active = of_property_read_bool(np, + "marvell,direct-key-low-active"); + + prop = of_get_property(np, "marvell,direct-key-map", &proplen); + if (!prop) + return -EINVAL; + + if (proplen % sizeof(u16)) + return -EINVAL; + + size = proplen / sizeof(u16); + + /* Only MAX_DIRECT_KEY_NUM is accepted.*/ + if (size > MAX_DIRECT_KEY_NUM) + return -EINVAL; + + for (i = 0; i < size; i++) { + code = be16_to_cpup(prop + i); + keypad->keycodes[MAX_MATRIX_KEY_NUM + i] = code; + __set_bit(code, input_dev->keybit); + } + + return 0; +} + +static int pxa27x_keypad_rotary_parse_dt(struct pxa27x_keypad *keypad) +{ + const __be32 *prop; + int i, relkey_ret; + unsigned int code, proplen; + const char *rotaryname[2] = { + "marvell,rotary0", "marvell,rotary1"}; + const char relkeyname[] = {"marvell,rotary-rel-key"}; + struct input_dev *input_dev = keypad->input_dev; + struct device *dev = input_dev->dev.parent; + struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + struct device_node *np = dev->of_node; + + relkey_ret = of_property_read_u32(np, relkeyname, &code); + /* if can read correct rotary key-code, we do not need this. */ + if (relkey_ret == 0) { + unsigned short relcode; + + /* rotary0 taks lower half, rotary1 taks upper half. */ + relcode = code & 0xffff; + pdata->rotary0_rel_code = (code & 0xffff); + __set_bit(relcode, input_dev->relbit); + + relcode = code >> 16; + pdata->rotary1_rel_code = relcode; + __set_bit(relcode, input_dev->relbit); + } + + for (i = 0; i < 2; i++) { + prop = of_get_property(np, rotaryname[i], &proplen); + /* + * If the prop is not set, it means keypad does not need + * initialize the rotaryX. + */ + if (!prop) + continue; + + code = be32_to_cpup(prop); + /* + * Not all up/down key code are valid. + * Now we depends on direct-rel-code. + */ + if ((!(code & 0xffff) || !(code >> 16)) && relkey_ret) { + return relkey_ret; + } else { + unsigned int n = MAX_MATRIX_KEY_NUM + (i << 1); + unsigned short keycode; + + keycode = code & 0xffff; + keypad->keycodes[n] = keycode; + __set_bit(keycode, input_dev->keybit); + + keycode = code >> 16; + keypad->keycodes[n + 1] = keycode; + __set_bit(keycode, input_dev->keybit); + + if (i == 0) + pdata->rotary0_rel_code = -1; + else + pdata->rotary1_rel_code = -1; + } + if (i == 0) + pdata->enable_rotary0 = 1; + else + pdata->enable_rotary1 = 1; + } + + keypad->rotary_rel_code[0] = pdata->rotary0_rel_code; + keypad->rotary_rel_code[1] = pdata->rotary1_rel_code; + + return 0; +} + +static int pxa27x_keypad_build_keycode_from_dt(struct pxa27x_keypad *keypad) +{ + struct input_dev *input_dev = keypad->input_dev; + struct device *dev = input_dev->dev.parent; + struct device_node *np = dev->of_node; + int error; + + keypad->pdata = devm_kzalloc(dev, sizeof(*keypad->pdata), + GFP_KERNEL); + if (!keypad->pdata) { + dev_err(dev, "failed to allocate memory for pdata\n"); + return -ENOMEM; + } + + error = pxa27x_keypad_matrix_key_parse_dt(keypad); + if (error) { + dev_err(dev, "failed to parse matrix key\n"); + return error; + } + + error = pxa27x_keypad_direct_key_parse_dt(keypad); + if (error) { + dev_err(dev, "failed to parse direct key\n"); + return error; + } + + error = pxa27x_keypad_rotary_parse_dt(keypad); + if (error) { + dev_err(dev, "failed to parse rotary key\n"); + return error; + } + + error = of_property_read_u32(np, "marvell,debounce-interval", + &keypad->pdata->debounce_interval); + if (error) { + dev_err(dev, "failed to parse debpunce-interval\n"); + return error; + } + + /* + * The keycodes may not only includes matrix key but also the direct + * key or rotary key. + */ + input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); + + return 0; +} + +#else + +static int pxa27x_keypad_build_keycode_from_dt(struct pxa27x_keypad *keypad) +{ + dev_info(keypad->input_dev->dev.parent, "missing platform data\n"); + + return -EINVAL; +} + +#endif + static int pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad) { struct pxa27x_keypad_platform_data *pdata = keypad->pdata; @@ -492,15 +715,15 @@ static const struct dev_pm_ops pxa27x_keypad_pm_ops = { static int pxa27x_keypad_probe(struct platform_device *pdev) { struct pxa27x_keypad_platform_data *pdata = pdev->dev.platform_data; + struct device_node *np = pdev->dev.of_node; struct pxa27x_keypad *keypad; struct input_dev *input_dev; struct resource *res; int irq, error; - if (pdata == NULL) { - dev_err(&pdev->dev, "no platform data defined\n"); + /* Driver need build keycode from device tree or pdata */ + if (!np && !pdata) return -EINVAL; - } irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -562,12 +785,18 @@ static int pxa27x_keypad_probe(struct platform_device *pdev) input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); input_set_capability(input_dev, EV_MSC, MSC_SCAN); - error = pxa27x_keypad_build_keycode(keypad); + if (pdata) + error = pxa27x_keypad_build_keycode(keypad); + else + error = pxa27x_keypad_build_keycode_from_dt(keypad); if (error) { dev_err(&pdev->dev, "failed to build keycode\n"); goto failed_put_clk; } + /* If device tree is supported, pdata will be allocated. */ + pdata = keypad->pdata; + if ((pdata->enable_rotary0 && keypad->rotary_rel_code[0] != -1) || (pdata->enable_rotary1 && keypad->rotary_rel_code[1] != -1)) { input_dev->evbit[0] |= BIT_MASK(EV_REL); @@ -628,11 +857,20 @@ static int pxa27x_keypad_remove(struct platform_device *pdev) /* work with hotplug and coldplug */ MODULE_ALIAS("platform:pxa27x-keypad"); +#ifdef CONFIG_OF +static const struct of_device_id pxa27x_keypad_dt_match[] = { + { .compatible = "marvell,pxa27x-keypad" }, + {}, +}; +MODULE_DEVICE_TABLE(of, pxa27x_keypad_dt_match); +#endif + static struct platform_driver pxa27x_keypad_driver = { .probe = pxa27x_keypad_probe, .remove = pxa27x_keypad_remove, .driver = { .name = "pxa27x-keypad", + .of_match_table = of_match_ptr(pxa27x_keypad_dt_match), .owner = THIS_MODULE, #ifdef CONFIG_PM .pm = &pxa27x_keypad_pm_ops, |