diff options
Diffstat (limited to 'sound/pci/hda/alc_quirks.c')
-rw-r--r-- | sound/pci/hda/alc_quirks.c | 480 |
1 files changed, 0 insertions, 480 deletions
diff --git a/sound/pci/hda/alc_quirks.c b/sound/pci/hda/alc_quirks.c deleted file mode 100644 index a18952e..0000000 --- a/sound/pci/hda/alc_quirks.c +++ /dev/null @@ -1,480 +0,0 @@ -/* - * Common codes for Realtek codec quirks - * included by patch_realtek.c - */ - -/* - * configuration template - to be copied to the spec instance - */ -struct alc_config_preset { - const struct snd_kcontrol_new *mixers[5]; /* should be identical size - * with spec - */ - const struct snd_kcontrol_new *cap_mixer; /* capture mixer */ - const struct hda_verb *init_verbs[5]; - unsigned int num_dacs; - const hda_nid_t *dac_nids; - hda_nid_t dig_out_nid; /* optional */ - hda_nid_t hp_nid; /* optional */ - const hda_nid_t *slave_dig_outs; - unsigned int num_adc_nids; - const hda_nid_t *adc_nids; - const hda_nid_t *capsrc_nids; - hda_nid_t dig_in_nid; - unsigned int num_channel_mode; - const struct hda_channel_mode *channel_mode; - int need_dac_fix; - int const_channel_count; - unsigned int num_mux_defs; - const struct hda_input_mux *input_mux; - void (*unsol_event)(struct hda_codec *, unsigned int); - void (*setup)(struct hda_codec *); - void (*init_hook)(struct hda_codec *); -#ifdef CONFIG_SND_HDA_POWER_SAVE - const struct hda_amp_list *loopbacks; - void (*power_hook)(struct hda_codec *codec); -#endif -}; - -/* - * channel mode setting - */ -static int alc_ch_mode_info(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo) -{ - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - struct alc_spec *spec = codec->spec; - return snd_hda_ch_mode_info(codec, uinfo, spec->channel_mode, - spec->num_channel_mode); -} - -static int alc_ch_mode_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - struct alc_spec *spec = codec->spec; - return snd_hda_ch_mode_get(codec, ucontrol, spec->channel_mode, - spec->num_channel_mode, - spec->ext_channel_count); -} - -static int alc_ch_mode_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - struct alc_spec *spec = codec->spec; - int err = snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode, - spec->num_channel_mode, - &spec->ext_channel_count); - if (err >= 0 && !spec->const_channel_count) { - spec->multiout.max_channels = spec->ext_channel_count; - if (spec->need_dac_fix) - spec->multiout.num_dacs = spec->multiout.max_channels / 2; - } - return err; -} - -/* - * Control the mode of pin widget settings via the mixer. "pc" is used - * instead of "%" to avoid consequences of accidentally treating the % as - * being part of a format specifier. Maximum allowed length of a value is - * 63 characters plus NULL terminator. - * - * Note: some retasking pin complexes seem to ignore requests for input - * states other than HiZ (eg: PIN_VREFxx) and revert to HiZ if any of these - * are requested. Therefore order this list so that this behaviour will not - * cause problems when mixer clients move through the enum sequentially. - * NIDs 0x0f and 0x10 have been observed to have this behaviour as of - * March 2006. - */ -static const char * const alc_pin_mode_names[] = { - "Mic 50pc bias", "Mic 80pc bias", - "Line in", "Line out", "Headphone out", -}; -static const unsigned char alc_pin_mode_values[] = { - PIN_VREF50, PIN_VREF80, PIN_IN, PIN_OUT, PIN_HP, -}; -/* The control can present all 5 options, or it can limit the options based - * in the pin being assumed to be exclusively an input or an output pin. In - * addition, "input" pins may or may not process the mic bias option - * depending on actual widget capability (NIDs 0x0f and 0x10 don't seem to - * accept requests for bias as of chip versions up to March 2006) and/or - * wiring in the computer. - */ -#define ALC_PIN_DIR_IN 0x00 -#define ALC_PIN_DIR_OUT 0x01 -#define ALC_PIN_DIR_INOUT 0x02 -#define ALC_PIN_DIR_IN_NOMICBIAS 0x03 -#define ALC_PIN_DIR_INOUT_NOMICBIAS 0x04 - -/* Info about the pin modes supported by the different pin direction modes. - * For each direction the minimum and maximum values are given. - */ -static const signed char alc_pin_mode_dir_info[5][2] = { - { 0, 2 }, /* ALC_PIN_DIR_IN */ - { 3, 4 }, /* ALC_PIN_DIR_OUT */ - { 0, 4 }, /* ALC_PIN_DIR_INOUT */ - { 2, 2 }, /* ALC_PIN_DIR_IN_NOMICBIAS */ - { 2, 4 }, /* ALC_PIN_DIR_INOUT_NOMICBIAS */ -}; -#define alc_pin_mode_min(_dir) (alc_pin_mode_dir_info[_dir][0]) -#define alc_pin_mode_max(_dir) (alc_pin_mode_dir_info[_dir][1]) -#define alc_pin_mode_n_items(_dir) \ - (alc_pin_mode_max(_dir)-alc_pin_mode_min(_dir)+1) - -static int alc_pin_mode_info(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo) -{ - unsigned int item_num = uinfo->value.enumerated.item; - unsigned char dir = (kcontrol->private_value >> 16) & 0xff; - - uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; - uinfo->count = 1; - uinfo->value.enumerated.items = alc_pin_mode_n_items(dir); - - if (item_num<alc_pin_mode_min(dir) || item_num>alc_pin_mode_max(dir)) - item_num = alc_pin_mode_min(dir); - strcpy(uinfo->value.enumerated.name, alc_pin_mode_names[item_num]); - return 0; -} - -static int alc_pin_mode_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - unsigned int i; - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char dir = (kcontrol->private_value >> 16) & 0xff; - long *valp = ucontrol->value.integer.value; - unsigned int pinctl = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_PIN_WIDGET_CONTROL, - 0x00); - - /* Find enumerated value for current pinctl setting */ - i = alc_pin_mode_min(dir); - while (i <= alc_pin_mode_max(dir) && alc_pin_mode_values[i] != pinctl) - i++; - *valp = i <= alc_pin_mode_max(dir) ? i: alc_pin_mode_min(dir); - return 0; -} - -static int alc_pin_mode_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - signed int change; - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char dir = (kcontrol->private_value >> 16) & 0xff; - long val = *ucontrol->value.integer.value; - unsigned int pinctl = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_PIN_WIDGET_CONTROL, - 0x00); - - if (val < alc_pin_mode_min(dir) || val > alc_pin_mode_max(dir)) - val = alc_pin_mode_min(dir); - - change = pinctl != alc_pin_mode_values[val]; - if (change) { - /* Set pin mode to that requested */ - snd_hda_codec_write_cache(codec, nid, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, - alc_pin_mode_values[val]); - - /* Also enable the retasking pin's input/output as required - * for the requested pin mode. Enum values of 2 or less are - * input modes. - * - * Dynamically switching the input/output buffers probably - * reduces noise slightly (particularly on input) so we'll - * do it. However, having both input and output buffers - * enabled simultaneously doesn't seem to be problematic if - * this turns out to be necessary in the future. - */ - if (val <= 2) { - snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0, - HDA_AMP_MUTE, HDA_AMP_MUTE); - snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0, - HDA_AMP_MUTE, 0); - } else { - snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0, - HDA_AMP_MUTE, HDA_AMP_MUTE); - snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0, - HDA_AMP_MUTE, 0); - } - } - return change; -} - -#define ALC_PIN_MODE(xname, nid, dir) \ - { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ - .subdevice = HDA_SUBDEV_NID_FLAG | nid, \ - .info = alc_pin_mode_info, \ - .get = alc_pin_mode_get, \ - .put = alc_pin_mode_put, \ - .private_value = nid | (dir<<16) } - -/* A switch control for ALC260 GPIO pins. Multiple GPIOs can be ganged - * together using a mask with more than one bit set. This control is - * currently used only by the ALC260 test model. At this stage they are not - * needed for any "production" models. - */ -#ifdef CONFIG_SND_DEBUG -#define alc_gpio_data_info snd_ctl_boolean_mono_info - -static int alc_gpio_data_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char mask = (kcontrol->private_value >> 16) & 0xff; - long *valp = ucontrol->value.integer.value; - unsigned int val = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_GPIO_DATA, 0x00); - - *valp = (val & mask) != 0; - return 0; -} -static int alc_gpio_data_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - signed int change; - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char mask = (kcontrol->private_value >> 16) & 0xff; - long val = *ucontrol->value.integer.value; - unsigned int gpio_data = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_GPIO_DATA, - 0x00); - - /* Set/unset the masked GPIO bit(s) as needed */ - change = (val == 0 ? 0 : mask) != (gpio_data & mask); - if (val == 0) - gpio_data &= ~mask; - else - gpio_data |= mask; - snd_hda_codec_write_cache(codec, nid, 0, - AC_VERB_SET_GPIO_DATA, gpio_data); - - return change; -} -#define ALC_GPIO_DATA_SWITCH(xname, nid, mask) \ - { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ - .subdevice = HDA_SUBDEV_NID_FLAG | nid, \ - .info = alc_gpio_data_info, \ - .get = alc_gpio_data_get, \ - .put = alc_gpio_data_put, \ - .private_value = nid | (mask<<16) } -#endif /* CONFIG_SND_DEBUG */ - -/* A switch control to allow the enabling of the digital IO pins on the - * ALC260. This is incredibly simplistic; the intention of this control is - * to provide something in the test model allowing digital outputs to be - * identified if present. If models are found which can utilise these - * outputs a more complete mixer control can be devised for those models if - * necessary. - */ -#ifdef CONFIG_SND_DEBUG -#define alc_spdif_ctrl_info snd_ctl_boolean_mono_info - -static int alc_spdif_ctrl_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char mask = (kcontrol->private_value >> 16) & 0xff; - long *valp = ucontrol->value.integer.value; - unsigned int val = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_DIGI_CONVERT_1, 0x00); - - *valp = (val & mask) != 0; - return 0; -} -static int alc_spdif_ctrl_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - signed int change; - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char mask = (kcontrol->private_value >> 16) & 0xff; - long val = *ucontrol->value.integer.value; - unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_DIGI_CONVERT_1, - 0x00); - - /* Set/unset the masked control bit(s) as needed */ - change = (val == 0 ? 0 : mask) != (ctrl_data & mask); - if (val==0) - ctrl_data &= ~mask; - else - ctrl_data |= mask; - snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1, - ctrl_data); - - return change; -} -#define ALC_SPDIF_CTRL_SWITCH(xname, nid, mask) \ - { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ - .subdevice = HDA_SUBDEV_NID_FLAG | nid, \ - .info = alc_spdif_ctrl_info, \ - .get = alc_spdif_ctrl_get, \ - .put = alc_spdif_ctrl_put, \ - .private_value = nid | (mask<<16) } -#endif /* CONFIG_SND_DEBUG */ - -/* A switch control to allow the enabling EAPD digital outputs on the ALC26x. - * Again, this is only used in the ALC26x test models to help identify when - * the EAPD line must be asserted for features to work. - */ -#ifdef CONFIG_SND_DEBUG -#define alc_eapd_ctrl_info snd_ctl_boolean_mono_info - -static int alc_eapd_ctrl_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char mask = (kcontrol->private_value >> 16) & 0xff; - long *valp = ucontrol->value.integer.value; - unsigned int val = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_EAPD_BTLENABLE, 0x00); - - *valp = (val & mask) != 0; - return 0; -} - -static int alc_eapd_ctrl_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - int change; - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char mask = (kcontrol->private_value >> 16) & 0xff; - long val = *ucontrol->value.integer.value; - unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_EAPD_BTLENABLE, - 0x00); - - /* Set/unset the masked control bit(s) as needed */ - change = (!val ? 0 : mask) != (ctrl_data & mask); - if (!val) - ctrl_data &= ~mask; - else - ctrl_data |= mask; - snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE, - ctrl_data); - - return change; -} - -#define ALC_EAPD_CTRL_SWITCH(xname, nid, mask) \ - { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ - .subdevice = HDA_SUBDEV_NID_FLAG | nid, \ - .info = alc_eapd_ctrl_info, \ - .get = alc_eapd_ctrl_get, \ - .put = alc_eapd_ctrl_put, \ - .private_value = nid | (mask<<16) } -#endif /* CONFIG_SND_DEBUG */ - -static void alc_fixup_autocfg_pin_nums(struct hda_codec *codec) -{ - struct alc_spec *spec = codec->spec; - struct auto_pin_cfg *cfg = &spec->autocfg; - - if (!cfg->line_outs) { - while (cfg->line_outs < AUTO_CFG_MAX_OUTS && - cfg->line_out_pins[cfg->line_outs]) - cfg->line_outs++; - } - if (!cfg->speaker_outs) { - while (cfg->speaker_outs < AUTO_CFG_MAX_OUTS && - cfg->speaker_pins[cfg->speaker_outs]) - cfg->speaker_outs++; - } - if (!cfg->hp_outs) { - while (cfg->hp_outs < AUTO_CFG_MAX_OUTS && - cfg->hp_pins[cfg->hp_outs]) - cfg->hp_outs++; - } -} - -/* - * set up from the preset table - */ -static void setup_preset(struct hda_codec *codec, - const struct alc_config_preset *preset) -{ - struct alc_spec *spec = codec->spec; - int i; - - for (i = 0; i < ARRAY_SIZE(preset->mixers) && preset->mixers[i]; i++) - add_mixer(spec, preset->mixers[i]); - spec->cap_mixer = preset->cap_mixer; - for (i = 0; i < ARRAY_SIZE(preset->init_verbs) && preset->init_verbs[i]; - i++) - add_verb(spec, preset->init_verbs[i]); - - spec->channel_mode = preset->channel_mode; - spec->num_channel_mode = preset->num_channel_mode; - spec->need_dac_fix = preset->need_dac_fix; - spec->const_channel_count = preset->const_channel_count; - - if (preset->const_channel_count) - spec->multiout.max_channels = preset->const_channel_count; - else - spec->multiout.max_channels = spec->channel_mode[0].channels; - spec->ext_channel_count = spec->channel_mode[0].channels; - - spec->multiout.num_dacs = preset->num_dacs; - spec->multiout.dac_nids = preset->dac_nids; - spec->multiout.dig_out_nid = preset->dig_out_nid; - spec->multiout.slave_dig_outs = preset->slave_dig_outs; - spec->multiout.hp_nid = preset->hp_nid; - - spec->num_mux_defs = preset->num_mux_defs; - if (!spec->num_mux_defs) - spec->num_mux_defs = 1; - spec->input_mux = preset->input_mux; - - spec->num_adc_nids = preset->num_adc_nids; - spec->adc_nids = preset->adc_nids; - spec->capsrc_nids = preset->capsrc_nids; - spec->dig_in_nid = preset->dig_in_nid; - - spec->unsol_event = preset->unsol_event; - spec->init_hook = preset->init_hook; -#ifdef CONFIG_SND_HDA_POWER_SAVE - spec->power_hook = preset->power_hook; - spec->loopback.amplist = preset->loopbacks; -#endif - - if (preset->setup) - preset->setup(codec); - - alc_fixup_autocfg_pin_nums(codec); -} - -static void alc_simple_setup_automute(struct alc_spec *spec, int mode) -{ - int lo_pin = spec->autocfg.line_out_pins[0]; - - if (lo_pin == spec->autocfg.speaker_pins[0] || - lo_pin == spec->autocfg.hp_pins[0]) - lo_pin = 0; - spec->automute_mode = mode; - spec->detect_hp = !!spec->autocfg.hp_pins[0]; - spec->detect_lo = !!lo_pin; - spec->automute_lo = spec->automute_lo_possible = !!lo_pin; - spec->automute_speaker = spec->automute_speaker_possible = !!spec->autocfg.speaker_pins[0]; -} - -/* auto-toggle front mic */ -static void alc88x_simple_mic_automute(struct hda_codec *codec) -{ - unsigned int present; - unsigned char bits; - - present = snd_hda_jack_detect(codec, 0x18); - bits = present ? HDA_AMP_MUTE : 0; - snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1, HDA_AMP_MUTE, bits); -} - |