summaryrefslogtreecommitdiff
path: root/arch/arm/mach-davinci/board-mityomapl138.c
AgeCommit message (Collapse)Author
2014-04-07Rewind v3.13-rc3+ (78fd82238d0e5716) to v3.12Scott Wood
2013-09-30misc: (at24) move header to linux/platform_data/Vivien Didelot
This patch moves the at24.h header from include/linux/i2c to include/linux/platform_data and updates existing support accordingly. It also fixes the following checkpatch warning: WARNING: please, no space before tabs #436: FILE: include/linux/platform_data/at24.h:31: + * ^Iu8 *mac_addr = ethernet_pdata->mac_addr;$ Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-21ARM: davinci: serial: get rid of davinci_uart_configManjunathappa, Prakash
"struct davinci_uart_config" was introduced to specify UART ports brought out or enabled on the board. But none of the boards use it for that purpose and we are not going to add anymore board files, so remove the structure. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Suggested-by: Sekhar Nori <nsekhar@ti.com> [nsekhar@ti.com: split patch to remove davinci_serial_setup_clk() changes.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-01-29Merge tag 'davinci-for-v3.9/soc' of ↵Olof Johansson
git://gitorious.org/linux-davinci/linux-davinci into next/soc From Sekhar Nori: DaVinci SoC changes for v3.9 This pull request: 1) Fixes a bug with the way SPI devices were registered on DA850 2) Adds support for DSP clock and resetting the DSP on DA850 3) Fixes checkpatch issue with some existing files. * tag 'davinci-for-v3.9/soc' of git://gitorious.org/linux-davinci/linux-davinci: ARM: davinci: da850: add dsp clock definition ARM: davinci: psc: introduce reset API ARM: davinci: psc.c: change pr_warning() to pr_warn() ARM: davinci: devices-da8xx.c: change pr_warning() to pr_warn() ARM: davinci: da8xx_register_spi() should not register SPI board info Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-03ARM: davinci: da8xx_register_spi() should not register SPI board infoVivien Didelot
Without this patch, da8xx_register_spi() registers the SPI board info, the SPI controller, and sets its number of chipselect to the size of the static spi_board_info array. This is bad because a SPI board info may declare devices for different SPI buses, and because other code can also call spi_register_board_info() (e.g. a daughter board might provide additional SPI devices). This patch removes the spi_register_board_info() call from da8xx_register_spi(), renames this last one to da8xx_register_spi_bus() to be more explicit, takes the number of chipselect as a function parameter, and updates the impacted board-da8{3,5}0-evm.c, and board-mityomapl138.c files accordingly. It also sets the SPI platform data static, as it doesn't need to be exported. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> [nsekhar@ti.com: fixed conflicts with v3.7-rc7, converted to use pr_warn(), modified print messages to use __func__] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-12-24ARM: delete struct sys_timerStephen Warren
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-14ARM: davinci: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the davinci include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Ben Dooks" <ben-linux@fluff.org> Cc: "Wolfram Sang" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: davinci-linux-open-source@linux.davincidsp.com
2012-05-05ARM: davinci: use machine specific hook for late initShawn Guo
Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com>
2012-01-05ARM: 7190/1: restart: davinci: use new restart hookSekhar Nori
Rather than using DaVinci specific davinci_soc_info based restart hook, use the restart hook available in the machine descriptor instead. Tested on DM365 and AM18x EVMs. v2: Changed to use restart hook in machine descriptor per Russell's comment. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-09-11mtd: nand: rename NAND_USE_FLASH_BBTBrian Norris
Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11mtd: nand: consolidate redundant flash-based BBT flagsBrian Norris
This patch works with the following three flags from two headers (nand.h and bbm.h): (1) NAND_USE_FLASH_BBT (nand.h) (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h) (3) NAND_BBT_NO_OOB (bbm.h) These flags are all related and interdependent, yet they were in different headers. Flag (2) is simply the combination of (1) and (3) and can be eliminated. This patch accomplishes the following: * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2)) * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h It's important to note that because (1) and (3) are now both found in bbm.h, they should NOT be used in the "nand_chip.options" field. I removed a small section from the mtdnand DocBook because it referes to NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-08-21ARM: mach-davinci: convert boot_params to atag_offsetNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-24Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (237 commits) ARM: 7004/1: fix traps.h compile warnings ARM: 6998/2: kernel: use proper memory barriers for bitops ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM ARM: Fix build errors caused by adding generic macros ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU ARM: CPU hotplug: pass in proper affinity mask on IRQ migration ARM: GIC: avoid routing interrupts to offline CPUs ARM: CPU hotplug: fix abuse of irqdesc->node ARM: 6981/2: mmci: adjust calculation of f_min ARM: 7000/1: LPAE: Use long long printk format for displaying the pud ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanence ARM: ARM_DMA_ZONE_SIZE is no more ARM: mach-shark: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-sa1100: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-pxa: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-h720x: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ...
2011-07-18ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_sizeNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-06-22net: remove mm.h inclusion from netdevice.hAlexey Dobriyan
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually). To prevent mm.h inclusion via other channels also extract "enum dma_data_direction" definition into separate header. This tiny piece is what gluing netdevice.h with mm.h via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h". Removal of mm.h from scatterlist.h was tried and was found not feasible on most archs, so the link was cutoff earlier. Hope people are OK with tiny include file. Note, that mm_types.h is still dragged in, but it is a separate story. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-25davinci: mityomapl138: Use auto-probe to determine attached PHY IDMichael Williamson
Current board configurations involving the MityDSP-L138 and MityARM-1808 only have one attached PHY, but it's address may not be the same. Default the behavior to auto-probe for the PHY and use the first one found. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-04-25davinci: mityomapl138: Use correct id for NAND controllerMichael Williamson
For the MityDSP-L138/MityARM-1808 SOMS, the NAND controller id (which needs to correspond to the chipselect, and is used for controlling the HW ECC computation) is not correct. Fix it. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-03-11davinci: add spi devices support for MityDSP-L138/MityARM-1808 platformMichael Williamson
This patch adds support for accessing the on board SPI NOR FLASH device for MityDSP-L138 and MityARM-1808 SoMs. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-28davinci: Support various speedgrades for MityDSP-L138 and MityARM-1808 SoMsMichael Williamson
For the MityDSP-L138/MityARM-1808 SoMs, the speed grade can be determined from the part number string read from the factory configuration block on the on-board I2C PROM. Configure the maximum CPU speed based on this information. This patch was tested using a MityDSP-L138 and MityARM-1808 at various speedgrades. Also, for code coverage, a bogus configuration was tested as well as a configuration having an unknown part number. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2010-10-22davinci: fix remaining board support after io_pgoffst removalKevin Hilman
Some boards that were added after the mass io_pgoffst/io_physio removal, and were not updated in the original patch. Fixup here. c.f. original io_pgoffst/io_physio removal commit 6451d7783ba5ff24eb1a544eaa6665b890f30466 Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-12davinci: mityomapl138: make file local data staticSekhar Nori
Most of the regulator data structures are local to the board file, but not made static. Fix this. Also make the nand partition table static. This gets rid of all the sparse warnings for this file. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C PromMichael Williamson
For the MityDSP-L138/MityARM-1808 SOMS, read the factory assigned MAC address from the onboard I2C EPROM and assign it to the emac device during platform initialization. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24davinci: cleanup mdio arch code and switch to phy_idCyril Chemparathy
This patch removes davinci architecture code that has now been rendered useless by the previous patches in the MDIO separation series. In addition, the earlier phy_mask definitions have been replaced with corresponding phy_id definitions. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Caglar Akyuz <caglarakyuz@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platformMichael Williamson
This patch adds the i2c0 bus and attached devices to the MityDSP-L138 and MityARM-1808 davinci SoM. Included is a TPS65023 voltage regulator needed for power management and a small 24c02 EPROM that contains factory configuration data. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24davinci: Initial support for MityDSP-L138/MityARM-1808Michael Williamson
This patch adds initial support for the MityDSP-L138 and MityDSP-1808 system on Module (SOM) under the machine name "mityomapl138". These SOMs are based on the da850 davinci CPU architecture. Information on these SOMs may be found at http://www.mitydsp.com. Basic support for the console UART, NAND, and EMAC (MII interface) is included in this patch. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>