summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/Makefile
AgeCommit message (Collapse)Author
2012-11-30Merge tag 'omap-for-v3.8/devel-prcm-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/pm2 From Tony Lindgren: omap prcm changes via Paul Walmsley <paul@pwsan.com>: Some miscellaneous OMAP hwmod changes for 3.8, along with a PRM change needed for one of the hwmod patches to function. Basic test logs for this branch on top of Tony's omap-for-v3.8/clock branch at commit 558a0780b0a04862a678f7823215424b4e5501f9 are here: http://www.pwsan.com/omap/testlogs/hwmod_devel_a_3.8/20121121161522/ However, omap-for-v3.8/clock at 558a0780 does not include some fixes that are needed for a successful test. With several reverts, fixes, and workarounds applied, the following test logs were obtained: http://www.pwsan.com/omap/testlogs/TEST_hwmod_devel_a_3.8/20121121162719/ which indicate that the series tests cleanly. * tag 'omap-for-v3.8/devel-prcm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (49 commits) ARM: OMAP2+: omap_device: Correct resource handling for DT boot ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count ARM: OMAP2+: PRM: initialize some PRM functions early ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP2xxx: clock: drop obsolete clock data ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections ARM: AM33xx: clock: drop obsolete clock data ARM: OMAP3xxx: clk: drop obsolete clock data ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP44xx: clock: drop obsolete clock data ARM: OMAP4: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP: hwmod: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP: clock: Switch to COMMON clk ARM: OMAP2: clock: Add 24xx data using common struct clk ARM: OMAP3: clock: Add 3xxx data using common struct clk ARM: AM33XX: clock: add clock data in common clock format ARM: OMAP4: clock: Add 44xx data using common struct clk ARM: OMAP2+: clock: add OMAP CCF convenience macros to mach-omap2/clock.h ... Some context conflicts due to nearby changes resolved in arch/arm/mach-omap2/io.c. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-15Merge tag 'omap-for-v3.8/cleanup-fixes-part2-v2-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren <tony@atomide.com>: One build fix for recent clean up when CONFIG_PM is not set and clean up related improvment to the SoC detection. * tag 'omap-for-v3.8/cleanup-fixes-part2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4: ID: Improve features detection and check ARM: OMAP: Fix compile for OMAP_PM_NOOP if PM is not selected Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-15Merge tag 'omap-for-v3.8/cleanup-prcm-part2-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren <tony@atomide.com>: More PRCM cleanups via Paul Walmsley <paul@pwsan.com>: Second set of OMAP PRCM cleanups for 3.8. These patches remove the use of omap_prcm_get_reset_sources() from the OMAP watchdog driver, and remove mach-omap2/prcm.c and plat-omap/include/plat/prcm.h. Basic test logs for this branch on top of Tony's cleanup-prcm branch at commit 7fc54fd3084457c7f11b9e2e1e3fcd19a3badc33 are here: http://www.pwsan.com/omap/testlogs/prcm_cleanup_b_3.8/20121108151646/ However, cleanup-prcm at 7fc54fd3 does not include some fixes that are needed for a successful test. With several reverts, fixes, and workarounds applied, the following test logs were obtained: http://www.pwsan.com/omap/testlogs/TEST_prcm_cleanup_b_3.8/20121108151930/ which indicate that the series tests cleanly. This second pull request updates one of the patches which broke with rmk's allnoconfigs, and also updates the tag description to indicate that 7fc54fd3 is building cleanly here. * tag 'omap-for-v3.8/cleanup-prcm-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits) ARM: OMAP2: Fix compillation error in cm_common ARM: OMAP2+: PRCM: remove obsolete prcm.[ch] ARM: OMAP2+: hwmod: call to _omap4_disable_module() should use the SoC-specific call ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup ARM: OMAP2+: PRCM: remove omap2_cm_wait_idlest() ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions ARM: OMAP2xxx: APLL/CM: convert to use omap2_cm_wait_module_ready() ARM: OMAP2+: board files: use SoC-specific system restart functions ARM: OMAP2+: PRCM: create SoC-specific chip restart functions ARM: OMAP2xxx: clock: move virt_prcm_set code into clkt2xxx_virt_prcm_set.c ARM: OMAP2xxx: clock: remove global 'dclk' variable ARM: OMAP2/3: PRM: add SoC reset functions (using the CORE DPLL method) ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code ARM: OMAP2+: PRCM: remove omap_prcm_get_reset_sources() watchdog: OMAP: use standard GETBOOTSTATUS interface; use platform_data fn ptr ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer ARM: OMAP1: CGRM: fix omap1_get_reset_sources() return type ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver ARM: OMAP1: create read_reset_sources() function (for initial use by watchdog) ... Conflicts: arch/arm/mach-omap2/cm33xx.c arch/arm/mach-omap2/io.c arch/arm/mach-omap2/prm_common.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-14ARM: OMAP: Fix compile for OMAP_PM_NOOP if PM is not selectedTony Lindgren
Commit 6e740f9a8 (ARM: OMAP: Move omap-pm-noop.c local to mach-omap2) moved omap-pm-noop to be local to mach-omap2. However, the makefile entry got placed within ifeq ($(CONFIG_PM),y) which was not the case earlier. Fix the issue by moving it out of the ifeq ($(CONFIG_PM),y) in the makefile as these stubs are needed also when PM is not set. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-13ARM: OMAP: clock: Switch to COMMON clkRajendra Nayak
Select COMMON_CLK for all OMAP2+ SoCs and switch over to using new data files for OMAP2/3/4. The older data files will get removed in subsequent patches. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: move 'select COMMON_CLK' from ARCH_OMAP2PLUS_TYPICAL to the per-SoC and per-"arch" Kconfig sections] [mturquette@ti.com: fixed up #ifdef mismatch in clock.h in previous patch which drops that change from this patch] Signed-off-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-11-08ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]Paul Walmsley
arch/arm/mach-omap2/prcm.c and arch/arm/plat-omap/include/plat/prcm.h are now completely unused and can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-11-08ARM: OMAP2+: PRCM: create SoC-specific chip restart functionsPaul Walmsley
Split omap_prcm_restart() from mach-omap2/prcm.c into SoC-specific variants. These functions need to be able to save the reboot reason into the scratchpad RAM. This implies a dependency on both the PRM and SCM IP blocks, so they've been moved into their own file. This will eventually call functions in the PRM and SCM drivers, once those are created. Vaibhav Hiremath <hvaibhav@ti.com> identified an unused prototype in the first version of this patch - now removed. Tony Lindgren <tony@atomide.com> noted a compile problem with some RMK Kconfigs; resolved in this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2012-10-31ARM: OMAP: Move omap-pm-noop.c local to mach-omap2Tony Lindgren
This code should be private to mach-omap2. The only use for it in for omap1 has been in dmtimer.c to check for context loss. However, omap1 does not lose context during idle, so the code is not needed. Further, omap1 timer has OMAP_TIMER_ALWON set, so omap1 was not hitting omap_pm_get_dev_context_loss_count() test. Cc: Jon Hunter <jon-hunter@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-31ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2Tony Lindgren
Let's make the omap2+ specific parts private to mach-omap2. This leaves just a minimal shared code into plat-omap like it should be. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-25Merge tag 'omap-cleanup-a-for-3.8' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8/cleanup-prcm The first set of OMAP PRM/CM-related cleanup patches for 3.8. Prepares for the future move of the PRM/CM code to drivers/. Also includes some prcm.[ch] cleanup patches from the WDTIMER cleanup series that don't need external acks. Basic test logs for this branch on top of v3.7-rc2 are here: http://www.pwsan.com/omap/testlogs/prcm_cleanup_a_3.8/20121021123719/ But due to the number of unrelated regressions present in v3.7-rc[12], it's not particularly usable as a testing base. With reverts, fixes, and workarounds applied as documented in: http://www.pwsan.com/omap/testlogs/test_v3.7-rc2/20121020134755/README.txt the following test logs were obtained: http://www.pwsan.com/omap/testlogs/prcm_cleanup_a_3.8/20121020231757/ which indicate that the series tests cleanly. Conflicts: arch/arm/mach-omap2/Makefile arch/arm/mach-omap2/clockdomain2xxx_3xxx.c arch/arm/mach-omap2/pm24xx.c
2012-10-21ARM: OMAP2+: CM: prepare for use of cm_ll_data function pointersPaul Walmsley
There are several CM operations which behave similarly across OMAP2+ SoCs, but which have slight differences in their underlying implementations. This patch creates the support code for this function pointer registration process. No function pointers are included yet, but a subsequent patch will create these for the module IDLEST registers. This patch allows other code to use CM-provided data and operations without needing to know which SoC is currently in use. A further description of the concept is provided in the patch entitled "ARM: OMAP2+: PRM: prepare for use of prm_ll_data function pointers". Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-10-21ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions ↵Paul Walmsley
into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific filesPaul Walmsley
Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain functions into PRMPaul Walmsley
Move the low-level SoC-specific powerdomain control functions into prm*.c. For example, OMAP2xxx low-level powerdomain functions go into prm2xxx.c. Then remove the unnecessary powerdomain*xxx*.c files. The objective is to centralize low-level PRM register accesses into the prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific filesPaul Walmsley
Move OMAP3xxx-specific PRM functions & macros into prm3xxx.[ch] and OMAP2xxx-specific macros into prm2xxx.h. (prm2xxx.c will be created by a subsequent patch when it's needed.) Move basic PRM register access functions into static inline functions in prm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in prm2xxx_3xxx.c. Also clarify the initcall function naming to reinforce that this code is specifically for the PRM IP block. This is in preparation for the upcoming powerdomain series and the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-17ARM: OMAP: Make omap_device local to mach-omap2Tony Lindgren
Let's make omap_device local to mach-omap2 for ARM common zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-07Merge tag 'soc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM soc platform updates from Olof Johansson: "This branch contains updates to OMAP and Marvell platforms (kirkwood, dove, mvebu) that came in after we had done the big multiplatform merges, so they were kept separate from the rest, and not separated into the traditional topics of cleanup/driver/platform features. For OMAP, the updates are: - Runtime PM conversions for the GPMC and RNG IP blocks - Preparation patches for the OMAP common clock framework conversion - clkdev alias additions required by other drivers - Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4 - OMAP hwmod code and data improvements - Preparation patches for the IOMMU runtime PM conversion - Preparation patches for OMAP4 full-chip retention support For Kirkwood/Dove/mvebu: - New driver for "address decoder controller" for mvebu, which is a piece of hardware that configures addressable devices and peripherals. First user is the boot rom aperture on armada XP since it is needed for SMP support. - New device tree bindings for peripherals such as gpio-fan, iconnect nand, mv_cesa and the above address decoder controller. - Some defconfig updates, mostly to enable new DT boards and a few drivers. - New drivers using the pincontrol subsystem for dove, kirkwood and mvebu - New clean gpio driver for mvebu" * tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits) ARM: mvebu: fix build breaks from multi-platform conversion ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70 ARM: OMAP2+: PMU: Add runtime PM support ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD ARM: OMAP3: hwmod data: Add debugss HWMOD data ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP hwrng: OMAP: remove SoC restrictions from driver registration ARM: OMAP: split OMAP1, OMAP2+ RNG device registration hwrng: OMAP: convert to use runtime PM hwrng: OMAP: store per-device data in per-device variables, not file statics ARM: OMAP2xxx: hwmod/CM: add RNG integration data ARM: OMAP2+: gpmc: minimal driver support ARM: OMAP2+: gpmc: Adapt to HWMOD ARM: OMAP2/3: hwmod data: add gpmc ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp ARM: OMAP3: hwmod data: add mmu data for iva and isp ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks ...
2012-10-05Merge branch 'late/kirkwood' into late/socOlof Johansson
Merge in the late Kirkwood branch with the OMAP late branch for upstream submission. Final contents described in shared tag. Fixup remove/change conflicts in arch/arm/mach-omap2/devices.c and drivers/spi/spi-omap2-mcspi.c. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-02Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
2012-10-02Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc-specific updates from Olof Johansson: "Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well." Fix up trivial conflicts with the clk infrastructure changes. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits) ARM: shmobile: add new __iomem annotation for new code ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup irqchip: fill in empty Kconfig ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ...
2012-09-23ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMODJon Hunter
Convert OMAP2/3 devices to use HWMOD for creating a PMU device. To support PMU on OMAP2 devices we only need to use MPU sub-system and so we can simply use the MPU HWMOD to create the PMU device. To support PMU on OMAP3 devices, we need to use the MPU and DEBUG sub-systems and so use these HWMODs to create the PMU device for OMAP3. The MPU HWMOD for OMAP2/3 devices is currently missing the PMU interrupt and so add the PMU interrupt to the MPU HWMOD for these devices. This change also moves the PMU code out of the mach-omap2/devices.c files into its own pmu.c file as suggested by Kevin Hilman to de-clutter devices.c. Cc: Ming Lei <ming.lei@canonical.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> [paul@pwsan.com: fixed checkpatch messages; updated to apply; dropped old-style initial filename line in header comments] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-23Merge tag 'omap-devel-am33xx-for-v3.7' into test_v3.6-rc6_ocb3.7_cff3.7_odaf3.7Paul Walmsley
From Paul Walmsley <paul@pwsan.com>: AM33xx hwmod data and miscellaneous clock and hwmod fixes. AM33xx should now boot on mainline after this is applied, according to Vaibhav.
2012-09-22Merge branch 'next/devel-samsung' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Misc SoC-related fixes/cleanups for Samsung platforms * 'next/devel-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers + sync to 3.6-rc6
2012-09-21Merge branch 'next/soc' into next/multiplatformOlof Johansson
* next/soc: (50 commits) ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ARM: tegra30: add CPU hotplug support ARM: tegra: clean up the common assembly macros into sleep.h ARM: tegra: replace the CPU CAR access code by tegra_cpu_car_ops ARM: tegra: introduce tegra_cpu_car_ops structures ARM: Tegra: Add smp_twd clock for Tegra20 ARM: AM33XX: clock: Add dcan clock aliases for device-tree ARM: OMAP2+: dpll: Add missing soc_is_am33xx() check for common functions ARM: OMAP: omap_device: idle devices with no driver bound ARM: OMAP: omap_device: don't attempt late suspend if no driver bound ARM: OMAP: omap_device: keep track of driver bound status ARM: OMAP3+: hwmod: Add AM33XX HWMOD data ARM: OMAP2+: hwmod: Hook-up am33xx support in omap_hwmod framework ... Change/remove conflict in arch/arm/mach-ux500/clock.c resolved. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21Merge tag 'tegra-for-3.7-dmaengine' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup ARM: tegra: switch to dmaengine The Tegra code-base has contained both a legacy DMA and a dmaengine driver since v3.6-rcX. This series flips Tegra's defconfig to enable dmaengine rather than the legacy driver, and removes the legacy driver and all client code. * tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ASoC: tegra: remove support of legacy DMA driver based access spi: tegra: remove support of legacy DMA driver based access ARM: tegra: apbio: remove support of legacy DMA driver based access ARM: tegra: dma: remove legacy APB DMA driver ARM: tegra: config: enable dmaengine based APB DMA driver + sync to 3.6-rc6
2012-09-19drivers: bus: Move the OMAP interconnect driver to drivers/bus/Santosh Shilimkar
OMAP interconnect drivers are used for the interconnect error handling. Since they are bus driver, lets move it to newly created drivers/bus. Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-12ARM: OMAP2+: clean up PRCM sections of the MakefilePaul Walmsley
Clean up the PRCM sections of the Makefile; this saves a few lines. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-12ARM: OMAP2+: clean up OMAP clock Makefile sectionsPaul Walmsley
Clean up the OMAP clock code sections of the Makefile to save some lines of diff. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-12ARM: OMAP2+: clean up OMAP4 PRM & sleep build directives in MakefilePaul Walmsley
The prm44xx.o and sleep44xx.o build directives belong with the other PRCM- and PM-related build sections in the Makefile; move them there. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-12ARM: OMAP2+: move MPU INTCPS, secure monitor, SDRC build directives in MakefilePaul Walmsley
Move MPU INTCPS (interrupt controller) and secure monitor code build directives to their own Makefile sections, for clarity. Coalesce SDRC-related Makefile directives into the SDRC Makefile section. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-12ARM: OMAP2+: clean up omap_hwmod.o build directives in MakefilePaul Walmsley
Move the omap_hwmod_common_data.o build directive down to the hwmod data Makefile section where it belongs. Move the omap_hwmod.o build directive to the top 'Common support' line, since we have no separate hwmod code Makefile section, and it's currently needed for all OMAP2+. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-12ARM: OMAP2+: clean up whitespace in MakefilePaul Walmsley
Convert spaces that should be tabs into tabs. Fix another minor formatting issue. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-11ARM: OMAP3+: hwmod: Add AM33XX HWMOD dataVaibhav Hiremath
This patch adds HWMOD data for all the peripherals of AM335X device and also hooks up to the existing OMAP framework. hwmod data has been already been cleaned up for the recent changes in clocktree, where all leaf nodes have been removed, since with modulemode based control, both clock and hwmod interface does same thing. This reduces the code size to large extent and also avoids duplication of same control. So instead of specifying module's leaf node as a main_clk, now we are relying on parent clock of module's functional clock. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: removed period in hwmod device names; changed mmc2 main_clk to mmc_clk at Vaibhav's request; added trailing commas to structure records at Tony's request to deal with some rmk parsing issues; added OMAP_INTC_START to facilitate sparse-IRQ conversion] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-08-30ARM: OMAP: Config fix for omap3-touchbook boardRadek Pilar
Fix inconsistency between mach-types and CONFIG_ name that prevents touchbook board from booting. Signed-off-by: Radek Pilar <mrkva@mrkva.eu> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-24Merge tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc clk changes from Arnd Bergmann: "Clock support is moving to the clk subsystem. These tegra, omap and imx changes are for code that is still platform specific and not (yet) part of that subsystem." Fix up conflicts in arch/arm/mach-{imx/clk-imx51-imx53.c,omap2/Makefile} * tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) ARM: imx: clk-imx31: Fix clock id for rnga driver ARM: imx: add missing item to the list of clock event modes ARM: i.MX5x CSPI: Fixed clock name for CSPI ARM: i.MX5x clocks: Fix GPT clocks ARM: i.MX5x clocks: Fix parent for PWM clocks ARM: i.MX5x clocks: Add EPIT support ARM: mx27: Reenable silicon version print ARM: clk-imx27: Fix rtc clock id ARM: tegra: Provide clock for only one PWM controller ARM: tegra: Fix PWM clock programming ARM: OMAP3+: clock33xx: Add AM33XX clock tree data ARM: OMAP3+: clock: Move common clksel_rate & clock data to common file ARM: tegra: dma: rename driver name for clock to "tegra-apbdma" ARM: tegra: Remove second instance of uart clk crypto: add clk_prepare/clk_unprepare ASoC: tegra: add clk_prepare/clk_unprepare staging: nvec: add clk_prepare/clk_unprepare spi/tegra: add clk_prepare/clk_unprepare Input: tegra-kbc - add clk_prepare/clk_unprepare USB: ehci-tegra: add clk_prepare/clk_unprepare ...
2012-07-24Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc power management changes from Arnd Bergmann: "These are various power management related changes, mainly concerning cpuidle on i.MX and OMAP, as well as a the move of the omap smartreflex driver to live in the power subsystem." Fix up conflicts in arch/arm/mach-{imx/mach-imx6q.c,omap2/prm2xxx_3xxx.h} * tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge ARM: OMAP2+: do not allow SmartReflex to be built as a module ARM: OMAP2: Use hwmod to initialize mmc for 2420 ARM: OMAP3: PM: cpuidle: optimize the clkdm idle latency in C1 state ARM: OMAP3: PM: cpuidle: optimize the PER latency in C1 state ARM: OMAP3: PM: cpuidle: default to C1 in next_valid_state ARM: OMAP3: PM: cleanup cam_pwrdm leftovers ARM: OMAP3: PM: call pre/post transition per powerdomain ARM: OMAP2+: powerdomain: allow pre/post transtion to be per pwrdm ARM: OMAP3: PM: Remove IO Daisychain control from cpuidle ARM: OMAP3PLUS: hwmod: reconfigure IO Daisychain during hwmod mux ARM: OMAP3+: PRM: Enable IO wake up ARM: OMAP4: PRM: Add IO Daisychain support ARM: OMAP3: PM: Move IO Daisychain function to omap3 prm file ARM: OMAP3: PM: correct enable/disable of daisy io chain ARM: OMAP2+: PRM: fix compile for OMAP4-only build W1: OMAP HDQ1W: use runtime PM ARM: OMAP2+: HDQ1W: use omap_device W1: OMAP HDQ1W: use 32-bit register accesses W1: OMAP HDQ1W: allow driver to be built on all OMAP2+ ...
2012-07-24Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc board specific updates from Arnd Bergmann: "These changes are all for individual board files. In the long run, those files will largely go away, and the amount of changes appears to be continuously decreasing, which is a good sign. This time around, changes are focused on tegra, omap and samsung." Fix conflicts in arch/arm/mach-{omap2/common-board-devices.c,tegra/Makefile.boot} as per the 'for-linus' branch. * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: EXYNOS: Add leds status1 and status2 on Origen board ARM: S3C64XX: Mark most Cragganmore initdata devinitdata ARM: EXYNOS: Add missing .reserve field to SMDKC210 ARM: EXYNOS: Add DRM device to SMDK4X12 board ARM: S3C64XX: Clean up after SPI driver platform data updates ARM: SAMSUNG: no need to set the value for clk_xusbxti when it is 24Mhz ARM: EXYNOS: Add framebuffer support for SMDK4X12 ARM: EXYNOS: Add HSOTG support to SMDK4X12 ARM: S5PV210: Add audio platform device in Goni board ARM: S5PV210: Add audio platform device in Aquila board ARM: EXYNOS: Add audio platform device in SMDKV310 board ARM: S3C64XX: Don't specify an irq_base for WM1192-EV1 board ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS support ARM: OMAP: board-omap4panda: MUX configuration for sys_nirq2 ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2 ARM: OMAP3530evm: set pendown_state and debounce time for ads7846 ARM: omap3evm: enable VBUS switch for EHCI tranceiver ARM: OMAP3EVM: Adding USB internal LDOs board file ARM: OMAP3EVM: Add NAND flash definition ARM: OMAP3: cm-t35: add tvp5150 decoder support ...
2012-07-23Merge tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull support for three new arm SoC types from Arnd Bergmann: - The mvebu platform includes Marvell's Armada XP and Armada 370 chips, made by the mvebu business unit inside of Marvell. Since the same group also made the older but similar platforms we call "orion5x", "kirkwood", "mv78xx0" and "dove", we plan to move all of them into the mach-mvebu directory in the future. - socfpga is Altera's platform based on Cortex-A9 cores and a lot of FPGA space. This is similar to the Xilinx zynq platform we already support. The code is particularly clean, which is helped by the fact that the hardware doesn't do much besides the parts that are expected to get added in the FPGA. - The OMAP subarchitecture gains support for the latest generation, the OMAP5 based on the new Cortex-A15 core. Support is rather rudimentary for now, but will be extended in the future. * tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits) ARM: socfpga: initial support for Altera's SOCFPGA platform arm: mvebu: generate DTBs for supported SoCs ARM: mvebu: MPIC: read number of interrupts from control register arm: mach-mvebu: add entry to MAINTAINERS arm: mach-mvebu: add compilation/configuration change arm: mach-mvebu: add defconfig arm: mach-mvebu: add documentation for new device tree bindings arm: mach-mvebu: add support for Armada 370 and Armada XP with DT arm: mach-mvebu: add source files arm: mach-mvebu: add header clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver ARM: Kconfig update to support additional GPIOs in OMAP5 ARM: OMAP5: Add the build support arm/dts: OMAP5: Add omap5 dts files ARM: OMAP5: board-generic: Add device tree support ARM: omap2+: board-generic: clean up the irq data from board file ARM: OMAP5: Add SMP support ARM: OMAP5: Add the WakeupGen IP updates ARM: OMAP5: l3: Add l3 error handler support for omap5 ARM: OMAP5: gpmc: Update gpmc_init() ... Conflicts: Documentation/devicetree/bindings/arm/omap/omap.txt arch/arm/mach-omap2/Makefile drivers/clocksource/Kconfig drivers/clocksource/Makefile
2012-07-23Merge tag 'cleanup2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc cleanups, part 2, from Arnd Bergmann: "These omap cleanups have dependencies on earlier omap branches that in turn depend on other cleanups, so they could not go into the same branch." * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP: sdrc: Fix the build break for OMAP4 only builds ARM: OMAP2+: dmtimer: cleanup fclk usage ARM: OMAP2+: Fix mismerge for omap_hwmod_get_main_clk() API ARM: OMAP2+: Remove unnecessary ifdef around __omap2_set_globals ARM: OMAP2+: am33xx: Change cpu_is_am33xx to soc_is_am33xx ARM: OMAP2+: am33xx: Make am33xx as a separate class ARM: OMAP2+: Move omap3 dpll ops to dpll3xxx.c ARM: OMAP2+: All OMAP2PLUS uses omap-device.o target so add one entry ARM: OMAP: dmtimer: use devm_ API and do some cleanup in probe() ARM: OMAP2+: hwmod code: add support to set dmadisable in hwmod framework ARM: OMAP2+: PRM/CM: Move the stubbed prm and cm functions to prcm.c file and make them __weak ARM: OMAP2+: hwmod: add omap_hwmod_get_main_clk() API ARM: OMAP3+: dpll: optimize noncore dpll locking logic ARM: OMAP3: control: add definition for CONTROL_CAMERA_PHY_CTRL ARM: OMAP2+: powerdomain code: Fix Wake-up power domain power status ARM: OMAP4: clockdomain/CM code: Update supported transition modes ARM: OMAP3/4: omap_hwmod: Add rstst_offs field to struct omap_hwmod_omap4_prcm ARM: OMAP2+: hwmod: Add new sysc_type3 into omap_hwmod required for am33xx
2012-07-23Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm soc-specific updates from Arnd Bergmann: "This is stuff that does not fit well into another category and in particular is not related to a particular board. The largest part in here is extending the am33xx support in the omap platform." Fix up trivial conflicts in arch/arm/mach-{imx/mach-mx35_3ds.c, tegra/Makefile} * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits) ARM: LPC32xx: Add PWM support ARM: LPC32xx: Add PWM clock ARM: LPC32xx: Set system serial based on cpu unique id ARM: vexpress: Config option for early printk console ARM: vexpress: Add Device Tree for V2P-CA15_CA7 core tile ARM: vexpress: Convert V2P-CA15 Device Tree to 64 bit addresses ARM: vexpress: Add fixed regulator for SMSC ARM: vexpress: Add missing SP804 interrupt in motherboard's DTS files ARM: vexpress: Initial common clock support ARM: SAMSUNG: Introduce Kconfig variable for Samsung custom clk API ARM: EXYNOS: Add missing static storage class specifier in pmu.c file ARM: EXYNOS: Make combiner_init function static ARM: EXYNOS: Update HSOTG PHY clock setting for EXYNOS4X12 ARM: versatile: Make plat-versatile clock optional ARM: vexpress: Check master site in daughterboard's sysctl operations ARM: vexpress: remove automatic errata workaround selection ARM: LPC32xx: Adjust to pl08x DMA interface changes ARM: EXYNOS: Clear SYS_WDTRESET bit to use watchdog reset ARM: imx: fix mx51 ehci setup errors ARM: imx: make ehci power/oc polarities configurable ...
2012-07-23Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull general arm-soc cleanups from Arnd Bergmann: "These are all boring changes, moving stuff around or renaming things mostly, and also getting rid of stuff that is duplicate or should not be there to start with. Platform-wise this is all over the place, mainly omap, samsung, at91, imx and tegra." Resolve trivial conflict in arch/arm/mach-omap2/clockdomains3xxx_data.c * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) ARM: clps711x: Remove the setting of the time ARM: clps711x: Removed superfluous transform virt_to_bus and related functions ARM: clps711x/p720t: Replace __initcall by .init_early call ARM: S3C24XX: Remove unused GPIO definitions for Openmoko GTA02 board ARM: S3C24XX: Remove unused GPIO definitions for port J ARM: S3C24XX: Remove unused GPA, GPE, GPH bank GPIO aliases ARM: S3C24XX: Convert the touchscreen setup code to common GPIO API ARM: S3C24XX: Convert the PM code to gpiolib API ARM: S3C24XX: Convert QT2410 board file to the gpiolib API ARM: S3C24XX: Convert SMDK board file to the gpiolib API ARM: S3C24XX: Free the backlight gpio requested in Mini2440 board code ARM: imx: remove unused pdata from device macros ARM: imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX_SSI from MACH_MX25_3DS ARM: at91: fix new build errors ARM: at91: add AIC5 support ARM: at91: remove mach/irqs.h ARM: at91: sparse irq support ARM: at91: at91 based machines specify their own irq handler at run time ARM: at91: remove static irq priorities for sam9x5 ARM: at91: add of irq priorities support ...
2012-07-09ARM: OMAP5: l3: Add l3 error handler support for omap5R Sricharan
The l3 interconnect ip is same for OMAP4 and OMAP5. So reuse the l3 error handler error code for OMAP5 as well. Also a few targets has been newly added for OMAP5. So updating the driver for that here. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-07-09ARM: OMAP5: Add minimal support for OMAP5430 SOCR Sricharan
OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and with an integrated L2 cache controller. OMAP5432 is another variant of OMAP5430, with a memory controller supporting DDR3 and SATA. Patch includes: - The machine specific headers and sources updates. - Platform header updates. - Minimum initialisation support for serial. - IO table init Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-07-05Merge tag 'omap-devel-e-for-3.5' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into devel-am33xx-data OMAP AM33xx clock data Conflicts: arch/arm/mach-omap2/Makefile
2012-07-05ARM: OMAP2+: Remove unnecessary ifdef around __omap2_set_globalsVaibhav Hiremath
The function __omap2_set_globals() can be common across all platforms/architectures, even in case of omap4, internally it calls same set of functions as in __omap2_set_globals() function (except for sdrc). This patch adds new config flag SOC_HAS_OMAP2_SDRC to handle sdrc, so that we can reuse same function across omap2/3/4... Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-05ARM: OMAP2+: am33xx: Make am33xx as a separate classVaibhav Hiremath
Initially, we decided to make am33xx family of device to fall under omap3 class (cpu_is_omap34xx() = true), since it carries Cortex-A8 core. But while adding complete baseport support (like, clock, power and hwmod) support, it is observed that, we are creating more and more problems by treating am33xx device as omap3 family, as nothing matches between them (except cortex-A8 mpu). So, after long discussion we have came to the conclusion that, we should not consider am33xx device as omap3 family, instead create separate class (SOC_AM33XX) under OMAP2PLUS. This means, for am33xx device, cpu_is_omap34xx() will return false, and only cpu_is_am33xx() will be true. Please refer to the link below, for mailing-list discussion on this - http://www.spinics.net/lists/linux-omap/msg69439.html Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: fixed typo, updated for soc_is changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-04Merge tags 'omap-cleanup-for-v3.6', 'omap-devel-dmtimer-for-v3.6' and ↵Tony Lindgren
'omap-devel-am33xx-for-v3.6' into devel-am33xx-part2
2012-07-02omap2+: add drm deviceAndy Gross
Register OMAP DRM/KMS platform device. DMM is split into a separate device using hwmod. Signed-off-by: Andy Gross <andy.gross@ti.com> Signed-off-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-29ARM: OMAP3+: clock33xx: Add AM33XX clock tree dataVaibhav Hiremath
AM33XX clock implementation is different than any existing OMAP family of devices. Although DPLL module is similar to OMAP4 device, but the usage is very much different than OMAP4. AM33XX has different peripheral set and each module gets integrated to the clock framework differently than OMAP family of devices. This patch adds full Clock tree data for AM33XX family of devices and also integrates it into existing OMAP framework. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> CC: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: updated to apply; changed 'soc_is_am33xx' to 'cpu_is_am33xx' to match usage in Tony's current am33xx branch] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-06-28Merge branch 'cleanup-hwmod' into cleanupTony Lindgren
Conflicts: arch/arm/mach-omap2/dsp.c