summaryrefslogtreecommitdiff
path: root/arch/blackfin/mm/sram-alloc.c
AgeCommit message (Collapse)Author
2012-11-19treewide: fix printk typo in multiple driversMasanari Iida
Correct spelling typo in multiple drivers. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-21blackfin: bf60x: add l2 ecc irq handlerBob Liu
bf60x support l2 hardware ecc error check, add panic when double bits ecc error happened. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-05-25Blackfin: convert /proc/sram to seq_fileAlexey Dobriyan
->read_proc interface is going away, switch to seq_file. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: sram_free_with_lsl: do not ignore return value of sram_freeMike Frysinger
If there was an error in the lower free functions, we need to pass that back up so the calling process is able to check things. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: use atomic kmalloc in L1 alloc so it too can be atomicMike Frysinger
Some drivers allocate L1 SRAM in atomic contexts, so make sure these functions also use GFP_ATOMIC to avoid BUG()'s. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-09Blackfin: simplify SMP handling in SRAM codeYi Li
There is no need to use {get,put}_cpu() when we already have a spinlock to protect against multiple processors running simultaneously. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-17Blackfin: push SRAM locks down into related ifdefsMike Frysinger
Rather than defining the locks and initializing them all the time, only do so when we actually need them (i.e. the SRAM regions exist). This avoids dead data and code bloat during runtime. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-24percpu: use DEFINE_PER_CPU_SHARED_ALIGNED()Tejun Heo
There are a few places where ___cacheline_aligned* is used with DEFINE_PER_CPU(). Use DEFINE_PER_CPU_SHARED_ALIGNED() instead. DEFINE_PER_CPU_SHARED_ALIGNED() applies alignment only on SMPs. While all other converted places used _in_smp variant or only get compiled for SMP, net/rds used unconditional ____cacheline_aligned. I don't see any reason these data structures should be aligned on UP and thus converted together. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Andy Grover <andy.grover@oracle.com>
2009-06-12Blackfin: document the lsl variants of the L1 allocatorMike Frysinger
Make sure the meaning of "lsl" is covered somewhere and it is clear why we somewhat duplicate the sram alloc/free functions. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: fix handling of initial L1 reservationGraf Yang
This restores some L1 reservation logic that was lost during the Blackfin SMP merge. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: merge sram init functionsGraf Yang
Now that the sram_init() function exists only to call the bfin_sram_init() after the punting of the reserve_pda() function, simply merge the two to avoid pointless overhead. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-30proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-07Blackfin arch: smp patch cleanup from LKML reviewGraf Yang
1. Use inline get_l1_... functions instead of macro 2. Fix compile issue about smp barrier functions Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: fix unused warning for some blackfin derivativesMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: SMP supporting patchset: Blackfin kernel and memory ↵Graf Yang
management code Blackfin dual core BF561 processor can support SMP like features. https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like In this patch, we provide SMP extend to Blackfin kernel and memory management code Singed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-28Blackfin arch: fix bug - shared lib function in L2 failed be calledJie Zhang
Allow user space to access L2 SRAM. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: rename blackfin_sram.c to sram-alloc.cRobin Getz
rename blackfin_sram.c to sram-alloc.c (we know it is a blackfin file, since it is in arch/blackfin) - and there is no "driver" code in there, it is just an allocator/deallocator for L1 and L2 sram. Also fix a problem that checkpatch pointed out Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>