summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2013-11-13backlight: atmel-pwm-bl: remove unused includeJohan Hovold
Remove unused include of clk.h. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: clean up get_intensityJohan Hovold
Clean up get_intensity to increase readability. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: clean up probe error handlingJohan Hovold
Clean up probe error handling by checking parameters before any allocations and removing an obsolete error label. Also remove unnecessary reset of private gpio number. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: fix module autoloadJohan Hovold
Add missing module alias which is needed for module autoloading. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: fix gpio polarity in removeJohan Hovold
Make sure to honour gpio polarity also at remove so that the backlight is actually disabled on boards with active-low enable pin. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: fix reported brightnessJohan Hovold
The driver supports 16-bit brightness values, but the value returned from get_brightness was truncated to eight bits. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13drivers/video/backlight/lm3630a_bl.c: add missing destroy_workqueue() on ↵Wei Yongjun
error in lm3630a_intr_config() Add the missing destroy_workqueue() before return from lm3630a_intr_config() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: s6e63m0: use devm_{backlight,lcd}_device_register()Jingoo Han
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: cr_bllcd: use devm_{backlight,lcd}_device_register()Jingoo Han
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: corgi_lcd: use devm_{backlight,lcd}_device_register()Jingoo Han
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ld9040: use devm_{backlight,lcd}_device_register()Jingoo Han
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ams369fg06: use devm_{backlight,lcd}_device_register()Jingoo Han
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: tdo24m: use devm_lcd_device_register()Jingoo Han
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: platform_lcd: use devm_lcd_device_register()Jingoo Han
Use devm_lcd_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ltv350qv: use devm_lcd_device_register()Jingoo Han
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lms501kf03: use devm_lcd_device_register()Jingoo Han
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lms283gf05: use devm_lcd_device_register()Jingoo Han
Use devm_lcd_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ili9320: use devm_lcd_device_register()Jingoo Han
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ili922x: use devm_lcd_device_register()Jingoo Han
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: hx8357: use devm_lcd_device_register()Jingoo Han
Use devm_lcd_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: wm831x_bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: tps65217_bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: pcf50633: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: pandora_bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: max8925_bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lv5207lp: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lp855x: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Also, unnecessary lp855x_backlight_unregister() is removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lm3533_bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: kb3886_bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: gpio_backlight: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: generic_bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ep93xx: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: da9052_bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: da903x_bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: bd6107: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: atmel-pwm-bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: as3711_bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: adp8870: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: adp8860: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: adp5520: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: aat2870: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: 88pm860x_bl: use devm_backlight_device_register()Jingoo Han
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lp8788: staticize 'default_bl_config'Jingoo Han
Fix the following sparse warning: drivers/video/backlight/lp8788_bl.c:55:25: warning: symbol 'default_bl_config' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lm3639: don't mix different enum typesJingoo Han
Don't mix different enum types to fix the sparse warnings. drivers/video/backlight/lm3639_bl.c:80:51: warning: mixing different enum types drivers/video/backlight/lm3639_bl.c:80:51: int enum lm3639_fleds versus drivers/video/backlight/lm3639_bl.c:80:51: int enum lm3639_bleds drivers/video/backlight/lm3639_bl.c:82:51: warning: mixing different enum types drivers/video/backlight/lm3639_bl.c:82:51: int enum lm3639_fleds versus drivers/video/backlight/lm3639_bl.c:82:51: int enum lm3639_bleds Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: ld9040: Staticize local variable gamma_tableJingoo Han
Fix the following sparse warnings: drivers/video/backlight/ld9040_gamma.h:172:3: warning: symbol 'gamma_table' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lm3630: fix sparse warningDaniel Jeong
This patch is to fix sparse warning due to mixing different enum type. Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13drivers/video/backlight/lm3630a_bl.c: potential NULL deref in probe()Dan Carpenter
We dereference "pdata" later in the function so we can't leave it as NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13drivers/video/backlight/lm3630a_bl.c: fix signedness bug in lm3630a_chip_init()Dan Carpenter
"rval" needs to be signed for the error handling to work. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13backlight: lm3630: apply chip revisionDaniel Jeong
The LM3630 chip was revised by TI and chip name was also changed to LM3630A. And register map, default values and initial sequences are changed. The files, lm3630_bl.{c,h} are replaced by lm3630a_bl.{c,h} You can find more information about LM3630A(datasheet, evm etc) at http://www.ti.com/product/lm3630a Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v0.10.2 at 2024-09-27 15:35:25 (GMT)