From a59ec1e7ff98cc4365d5b1bff4e7102e86b5716b Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 15 Jun 2011 15:08:11 -0700 Subject: backlight: new driver for the ADP8870 backlight devices Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 new file mode 100644 index 0000000..aa11dbd --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 @@ -0,0 +1,56 @@ +What: /sys/class/backlight//_max +What: /sys/class/backlight//l1_daylight_max +What: /sys/class/backlight//l2_bright_max +What: /sys/class/backlight//l3_office_max +What: /sys/class/backlight//l4_indoor_max +What: /sys/class/backlight//l5_dark_max +Date: Mai 2011 +KernelVersion: 2.6.40 +Contact: device-drivers-devel@blackfin.uclinux.org +Description: + Control the maximum brightness for + on this . Values are between 0 and 127. This file + will also show the brightness level stored for this + . + +What: /sys/class/backlight//_dim +What: /sys/class/backlight//l2_bright_dim +What: /sys/class/backlight//l3_office_dim +What: /sys/class/backlight//l4_indoor_dim +What: /sys/class/backlight//l5_dark_dim +Date: Mai 2011 +KernelVersion: 2.6.40 +Contact: device-drivers-devel@blackfin.uclinux.org +Description: + Control the dim brightness for + on this . Values are between 0 and 127, typically + set to 0. Full off when the backlight is disabled. + This file will also show the dim brightness level stored for + this . + +What: /sys/class/backlight//ambient_light_level +Date: Mai 2011 +KernelVersion: 2.6.40 +Contact: device-drivers-devel@blackfin.uclinux.org +Description: + Get conversion value of the light sensor. + This value is updated every 80 ms (when the light sensor + is enabled). Returns integer between 0 (dark) and + 8000 (max ambient brightness) + +What: /sys/class/backlight//ambient_light_zone +Date: Mai 2011 +KernelVersion: 2.6.40 +Contact: device-drivers-devel@blackfin.uclinux.org +Description: + Get/Set current ambient light zone. Reading returns + integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark). + Writing a value between 1..5 forces the backlight controller + to enter the corresponding ambient light zone. + Writing 0 returns to normal/automatic ambient light level + operation. The ambient light sensing feature on these devices + is an extension to the API documented in + Documentation/ABI/stable/sysfs-class-backlight. + It can be enabled by writing the value stored in + /sys/class/backlight//max_brightness to + /sys/class/backlight//brightness. \ No newline at end of file diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 0c9373b..2d93c8d 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -302,6 +302,18 @@ config BACKLIGHT_ADP8860 To compile this driver as a module, choose M here: the module will be called adp8860_bl. +config BACKLIGHT_ADP8870 + tristate "Backlight Driver for ADP8870 using WLED" + depends on BACKLIGHT_CLASS_DEVICE && I2C + select NEW_LEDS + select LEDS_CLASS + help + If you have a LCD backlight connected to the ADP8870, + say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called adp8870_bl. + config BACKLIGHT_88PM860X tristate "Backlight Driver for 88PM8606 using WLED" depends on MFD_88PM860X diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index b9ca849..ee72adb 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o +obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c new file mode 100644 index 0000000..e320b62 --- /dev/null +++ b/drivers/video/backlight/adp8870_bl.c @@ -0,0 +1,1011 @@ +/* + * Backlight driver for Analog Devices ADP8870 Backlight Devices + * + * Copyright 2009-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#define ADP8870_EXT_FEATURES +#define ADP8870_USE_LEDS + + +#define ADP8870_MFDVID 0x00 /* Manufacturer and device ID */ +#define ADP8870_MDCR 0x01 /* Device mode and status */ +#define ADP8870_INT_STAT 0x02 /* Interrupts status */ +#define ADP8870_INT_EN 0x03 /* Interrupts enable */ +#define ADP8870_CFGR 0x04 /* Configuration register */ +#define ADP8870_BLSEL 0x05 /* Sink enable backlight or independent */ +#define ADP8870_PWMLED 0x06 /* PWM Enable Selection Register */ +#define ADP8870_BLOFF 0x07 /* Backlight off timeout */ +#define ADP8870_BLDIM 0x08 /* Backlight dim timeout */ +#define ADP8870_BLFR 0x09 /* Backlight fade in and out rates */ +#define ADP8870_BLMX1 0x0A /* Backlight (Brightness Level 1-daylight) maximum current */ +#define ADP8870_BLDM1 0x0B /* Backlight (Brightness Level 1-daylight) dim current */ +#define ADP8870_BLMX2 0x0C /* Backlight (Brightness Level 2-bright) maximum current */ +#define ADP8870_BLDM2 0x0D /* Backlight (Brightness Level 2-bright) dim current */ +#define ADP8870_BLMX3 0x0E /* Backlight (Brightness Level 3-office) maximum current */ +#define ADP8870_BLDM3 0x0F /* Backlight (Brightness Level 3-office) dim current */ +#define ADP8870_BLMX4 0x10 /* Backlight (Brightness Level 4-indoor) maximum current */ +#define ADP8870_BLDM4 0x11 /* Backlight (Brightness Level 4-indoor) dim current */ +#define ADP8870_BLMX5 0x12 /* Backlight (Brightness Level 5-dark) maximum current */ +#define ADP8870_BLDM5 0x13 /* Backlight (Brightness Level 5-dark) dim current */ +#define ADP8870_ISCLAW 0x1A /* Independent sink current fade law register */ +#define ADP8870_ISCC 0x1B /* Independent sink current control register */ +#define ADP8870_ISCT1 0x1C /* Independent Sink Current Timer Register LED[7:5] */ +#define ADP8870_ISCT2 0x1D /* Independent Sink Current Timer Register LED[4:1] */ +#define ADP8870_ISCF 0x1E /* Independent sink current fade register */ +#define ADP8870_ISC1 0x1F /* Independent Sink Current LED1 */ +#define ADP8870_ISC2 0x20 /* Independent Sink Current LED2 */ +#define ADP8870_ISC3 0x21 /* Independent Sink Current LED3 */ +#define ADP8870_ISC4 0x22 /* Independent Sink Current LED4 */ +#define ADP8870_ISC5 0x23 /* Independent Sink Current LED5 */ +#define ADP8870_ISC6 0x24 /* Independent Sink Current LED6 */ +#define ADP8870_ISC7 0x25 /* Independent Sink Current LED7 (Brightness Level 1-daylight) */ +#define ADP8870_ISC7_L2 0x26 /* Independent Sink Current LED7 (Brightness Level 2-bright) */ +#define ADP8870_ISC7_L3 0x27 /* Independent Sink Current LED7 (Brightness Level 3-office) */ +#define ADP8870_ISC7_L4 0x28 /* Independent Sink Current LED7 (Brightness Level 4-indoor) */ +#define ADP8870_ISC7_L5 0x29 /* Independent Sink Current LED7 (Brightness Level 5-dark) */ +#define ADP8870_CMP_CTL 0x2D /* ALS Comparator Control Register */ +#define ADP8870_ALS1_EN 0x2E /* Main ALS comparator level enable */ +#define ADP8870_ALS2_EN 0x2F /* Second ALS comparator level enable */ +#define ADP8870_ALS1_STAT 0x30 /* Main ALS Comparator Status Register */ +#define ADP8870_ALS2_STAT 0x31 /* Second ALS Comparator Status Register */ +#define ADP8870_L2TRP 0x32 /* L2 comparator reference */ +#define ADP8870_L2HYS 0x33 /* L2 hysteresis */ +#define ADP8870_L3TRP 0x34 /* L3 comparator reference */ +#define ADP8870_L3HYS 0x35 /* L3 hysteresis */ +#define ADP8870_L4TRP 0x36 /* L4 comparator reference */ +#define ADP8870_L4HYS 0x37 /* L4 hysteresis */ +#define ADP8870_L5TRP 0x38 /* L5 comparator reference */ +#define ADP8870_L5HYS 0x39 /* L5 hysteresis */ +#define ADP8870_PH1LEVL 0x40 /* First phototransistor ambient light level-low byte register */ +#define ADP8870_PH1LEVH 0x41 /* First phototransistor ambient light level-high byte register */ +#define ADP8870_PH2LEVL 0x42 /* Second phototransistor ambient light level-low byte register */ +#define ADP8870_PH2LEVH 0x43 /* Second phototransistor ambient light level-high byte register */ + +#define ADP8870_MANUFID 0x3 /* Analog Devices AD8870 Manufacturer and device ID */ +#define ADP8870_DEVID(x) ((x) & 0xF) +#define ADP8870_MANID(x) ((x) >> 4) + +/* MDCR Device mode and status */ +#define D7ALSEN (1 << 7) +#define INT_CFG (1 << 6) +#define NSTBY (1 << 5) +#define DIM_EN (1 << 4) +#define GDWN_DIS (1 << 3) +#define SIS_EN (1 << 2) +#define CMP_AUTOEN (1 << 1) +#define BLEN (1 << 0) + +/* ADP8870_ALS1_EN Main ALS comparator level enable */ +#define L5_EN (1 << 3) +#define L4_EN (1 << 2) +#define L3_EN (1 << 1) +#define L2_EN (1 << 0) + +#define CFGR_BLV_SHIFT 3 +#define CFGR_BLV_MASK 0x7 +#define ADP8870_FLAG_LED_MASK 0xFF + +#define FADE_VAL(in, out) ((0xF & (in)) | ((0xF & (out)) << 4)) +#define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1)) +#define ALS_CMPR_CFG_VAL(filt) ((0x7 & (filt)) << 1) + +struct adp8870_bl { + struct i2c_client *client; + struct backlight_device *bl; + struct adp8870_led *led; + struct adp8870_backlight_platform_data *pdata; + struct mutex lock; + unsigned long cached_daylight_max; + int id; + int revid; + int current_brightness; +}; + +struct adp8870_led { + struct led_classdev cdev; + struct work_struct work; + struct i2c_client *client; + enum led_brightness new_brightness; + int id; + int flags; +}; + +static int adp8870_read(struct i2c_client *client, int reg, uint8_t *val) +{ + int ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) { + dev_err(&client->dev, "failed reading at 0x%02x\n", reg); + return ret; + } + + *val = ret; + return 0; +} + + +static int adp8870_write(struct i2c_client *client, u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(client, reg, val); + if (ret) + dev_err(&client->dev, "failed to write\n"); + + return ret; +} + +static int adp8870_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask) +{ + struct adp8870_bl *data = i2c_get_clientdata(client); + uint8_t reg_val; + int ret; + + mutex_lock(&data->lock); + + ret = adp8870_read(client, reg, ®_val); + + if (!ret && ((reg_val & bit_mask) == 0)) { + reg_val |= bit_mask; + ret = adp8870_write(client, reg, reg_val); + } + + mutex_unlock(&data->lock); + return ret; +} + +static int adp8870_clr_bits(struct i2c_client *client, int reg, uint8_t bit_mask) +{ + struct adp8870_bl *data = i2c_get_clientdata(client); + uint8_t reg_val; + int ret; + + mutex_lock(&data->lock); + + ret = adp8870_read(client, reg, ®_val); + + if (!ret && (reg_val & bit_mask)) { + reg_val &= ~bit_mask; + ret = adp8870_write(client, reg, reg_val); + } + + mutex_unlock(&data->lock); + return ret; +} + +/* + * Independent sink / LED + */ +#if defined(ADP8870_USE_LEDS) +static void adp8870_led_work(struct work_struct *work) +{ + struct adp8870_led *led = container_of(work, struct adp8870_led, work); + adp8870_write(led->client, ADP8870_ISC1 + led->id - 1, + led->new_brightness >> 1); +} + +static void adp8870_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct adp8870_led *led; + + led = container_of(led_cdev, struct adp8870_led, cdev); + led->new_brightness = value; + /* + * Use workqueue for IO since I2C operations can sleep. + */ + schedule_work(&led->work); +} + +static int adp8870_led_setup(struct adp8870_led *led) +{ + struct i2c_client *client = led->client; + int ret = 0; + + ret = adp8870_write(client, ADP8870_ISC1 + led->id - 1, 0); + if (ret) + return ret; + + ret = adp8870_set_bits(client, ADP8870_ISCC, 1 << (led->id - 1)); + if (ret) + return ret; + + if (led->id > 4) + ret = adp8870_set_bits(client, ADP8870_ISCT1, + (led->flags & 0x3) << ((led->id - 5) * 2)); + else + ret = adp8870_set_bits(client, ADP8870_ISCT2, + (led->flags & 0x3) << ((led->id - 1) * 2)); + + return ret; +} + +static int __devinit adp8870_led_probe(struct i2c_client *client) +{ + struct adp8870_backlight_platform_data *pdata = + client->dev.platform_data; + struct adp8870_bl *data = i2c_get_clientdata(client); + struct adp8870_led *led, *led_dat; + struct led_info *cur_led; + int ret, i; + + + led = kcalloc(pdata->num_leds, sizeof(*led), GFP_KERNEL); + if (led == NULL) { + dev_err(&client->dev, "failed to alloc memory\n"); + return -ENOMEM; + } + + ret = adp8870_write(client, ADP8870_ISCLAW, pdata->led_fade_law); + if (ret) + goto err_free; + + ret = adp8870_write(client, ADP8870_ISCT1, + (pdata->led_on_time & 0x3) << 6); + if (ret) + goto err_free; + + ret = adp8870_write(client, ADP8870_ISCF, + FADE_VAL(pdata->led_fade_in, pdata->led_fade_out)); + if (ret) + goto err_free; + + for (i = 0; i < pdata->num_leds; ++i) { + cur_led = &pdata->leds[i]; + led_dat = &led[i]; + + led_dat->id = cur_led->flags & ADP8870_FLAG_LED_MASK; + + if (led_dat->id > 7 || led_dat->id < 1) { + dev_err(&client->dev, "Invalid LED ID %d\n", + led_dat->id); + goto err; + } + + if (pdata->bl_led_assign & (1 << (led_dat->id - 1))) { + dev_err(&client->dev, "LED %d used by Backlight\n", + led_dat->id); + goto err; + } + + led_dat->cdev.name = cur_led->name; + led_dat->cdev.default_trigger = cur_led->default_trigger; + led_dat->cdev.brightness_set = adp8870_led_set; + led_dat->cdev.brightness = LED_OFF; + led_dat->flags = cur_led->flags >> FLAG_OFFT_SHIFT; + led_dat->client = client; + led_dat->new_brightness = LED_OFF; + INIT_WORK(&led_dat->work, adp8870_led_work); + + ret = led_classdev_register(&client->dev, &led_dat->cdev); + if (ret) { + dev_err(&client->dev, "failed to register LED %d\n", + led_dat->id); + goto err; + } + + ret = adp8870_led_setup(led_dat); + if (ret) { + dev_err(&client->dev, "failed to write\n"); + i++; + goto err; + } + } + + data->led = led; + + return 0; + + err: + for (i = i - 1; i >= 0; --i) { + led_classdev_unregister(&led[i].cdev); + cancel_work_sync(&led[i].work); + } + + err_free: + kfree(led); + + return ret; +} + +static int __devexit adp8870_led_remove(struct i2c_client *client) +{ + struct adp8870_backlight_platform_data *pdata = + client->dev.platform_data; + struct adp8870_bl *data = i2c_get_clientdata(client); + int i; + + for (i = 0; i < pdata->num_leds; i++) { + led_classdev_unregister(&data->led[i].cdev); + cancel_work_sync(&data->led[i].work); + } + + kfree(data->led); + return 0; +} +#else +static int __devinit adp8870_led_probe(struct i2c_client *client) +{ + return 0; +} + +static int __devexit adp8870_led_remove(struct i2c_client *client) +{ + return 0; +} +#endif + +static int adp8870_bl_set(struct backlight_device *bl, int brightness) +{ + struct adp8870_bl *data = bl_get_data(bl); + struct i2c_client *client = data->client; + int ret = 0; + + if (data->pdata->en_ambl_sens) { + if ((brightness > 0) && (brightness < ADP8870_MAX_BRIGHTNESS)) { + /* Disable Ambient Light auto adjust */ + ret = adp8870_clr_bits(client, ADP8870_MDCR, + CMP_AUTOEN); + if (ret) + return ret; + ret = adp8870_write(client, ADP8870_BLMX1, brightness); + if (ret) + return ret; + } else { + /* + * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust + * restore daylight l1 sysfs brightness + */ + ret = adp8870_write(client, ADP8870_BLMX1, + data->cached_daylight_max); + if (ret) + return ret; + + ret = adp8870_set_bits(client, ADP8870_MDCR, + CMP_AUTOEN); + if (ret) + return ret; + } + } else { + ret = adp8870_write(client, ADP8870_BLMX1, brightness); + if (ret) + return ret; + } + + if (data->current_brightness && brightness == 0) + ret = adp8870_set_bits(client, + ADP8870_MDCR, DIM_EN); + else if (data->current_brightness == 0 && brightness) + ret = adp8870_clr_bits(client, + ADP8870_MDCR, DIM_EN); + + if (!ret) + data->current_brightness = brightness; + + return ret; +} + +static int adp8870_bl_update_status(struct backlight_device *bl) +{ + int brightness = bl->props.brightness; + if (bl->props.power != FB_BLANK_UNBLANK) + brightness = 0; + + if (bl->props.fb_blank != FB_BLANK_UNBLANK) + brightness = 0; + + return adp8870_bl_set(bl, brightness); +} + +static int adp8870_bl_get_brightness(struct backlight_device *bl) +{ + struct adp8870_bl *data = bl_get_data(bl); + + return data->current_brightness; +} + +static const struct backlight_ops adp8870_bl_ops = { + .update_status = adp8870_bl_update_status, + .get_brightness = adp8870_bl_get_brightness, +}; + +static int adp8870_bl_setup(struct backlight_device *bl) +{ + struct adp8870_bl *data = bl_get_data(bl); + struct i2c_client *client = data->client; + struct adp8870_backlight_platform_data *pdata = data->pdata; + int ret = 0; + + ret = adp8870_write(client, ADP8870_BLSEL, ~pdata->bl_led_assign); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_PWMLED, pdata->pwm_assign); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLMX1, pdata->l1_daylight_max); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLDM1, pdata->l1_daylight_dim); + if (ret) + return ret; + + if (pdata->en_ambl_sens) { + data->cached_daylight_max = pdata->l1_daylight_max; + ret = adp8870_write(client, ADP8870_BLMX2, + pdata->l2_bright_max); + if (ret) + return ret; + ret = adp8870_write(client, ADP8870_BLDM2, + pdata->l2_bright_dim); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLMX3, + pdata->l3_office_max); + if (ret) + return ret; + ret = adp8870_write(client, ADP8870_BLDM3, + pdata->l3_office_dim); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLMX4, + pdata->l4_indoor_max); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLDM4, + pdata->l4_indor_dim); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLMX5, + pdata->l5_dark_max); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLDM5, + pdata->l5_dark_dim); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L2TRP, pdata->l2_trip); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L2HYS, pdata->l2_hyst); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L3TRP, pdata->l3_trip); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L3HYS, pdata->l3_hyst); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L4TRP, pdata->l4_trip); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L4HYS, pdata->l4_hyst); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L5TRP, pdata->l5_trip); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L5HYS, pdata->l5_hyst); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_ALS1_EN, L5_EN | L4_EN | + L3_EN | L2_EN); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_CMP_CTL, + ALS_CMPR_CFG_VAL(pdata->abml_filt)); + if (ret) + return ret; + } + + ret = adp8870_write(client, ADP8870_CFGR, + BL_CFGR_VAL(pdata->bl_fade_law, 0)); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLFR, FADE_VAL(pdata->bl_fade_in, + pdata->bl_fade_out)); + if (ret) + return ret; + /* + * ADP8870 Rev0 requires GDWN_DIS bit set + */ + + ret = adp8870_set_bits(client, ADP8870_MDCR, BLEN | DIM_EN | NSTBY | + (data->revid == 0 ? GDWN_DIS : 0)); + + return ret; +} + +static ssize_t adp8870_show(struct device *dev, char *buf, int reg) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + + mutex_lock(&data->lock); + error = adp8870_read(data->client, reg, ®_val); + mutex_unlock(&data->lock); + + if (error < 0) + return error; + + return sprintf(buf, "%u\n", reg_val); +} + +static ssize_t adp8870_store(struct device *dev, const char *buf, + size_t count, int reg) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + unsigned long val; + int ret; + + ret = strict_strtoul(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->lock); + adp8870_write(data->client, reg, val); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t adp8870_bl_l5_dark_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX5); +} + +static ssize_t adp8870_bl_l5_dark_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLMX5); +} +static DEVICE_ATTR(l5_dark_max, 0664, adp8870_bl_l5_dark_max_show, + adp8870_bl_l5_dark_max_store); + + +static ssize_t adp8870_bl_l4_indoor_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX4); +} + +static ssize_t adp8870_bl_l4_indoor_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLMX4); +} +static DEVICE_ATTR(l4_indoor_max, 0664, adp8870_bl_l4_indoor_max_show, + adp8870_bl_l4_indoor_max_store); + + +static ssize_t adp8870_bl_l3_office_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX3); +} + +static ssize_t adp8870_bl_l3_office_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLMX3); +} + +static DEVICE_ATTR(l3_office_max, 0664, adp8870_bl_l3_office_max_show, + adp8870_bl_l3_office_max_store); + +static ssize_t adp8870_bl_l2_bright_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX2); +} + +static ssize_t adp8870_bl_l2_bright_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLMX2); +} +static DEVICE_ATTR(l2_bright_max, 0664, adp8870_bl_l2_bright_max_show, + adp8870_bl_l2_bright_max_store); + +static ssize_t adp8870_bl_l1_daylight_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX1); +} + +static ssize_t adp8870_bl_l1_daylight_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + int ret = strict_strtoul(buf, 10, &data->cached_daylight_max); + if (ret) + return ret; + + return adp8870_store(dev, buf, count, ADP8870_BLMX1); +} +static DEVICE_ATTR(l1_daylight_max, 0664, adp8870_bl_l1_daylight_max_show, + adp8870_bl_l1_daylight_max_store); + +static ssize_t adp8870_bl_l5_dark_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM5); +} + +static ssize_t adp8870_bl_l5_dark_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM5); +} +static DEVICE_ATTR(l5_dark_dim, 0664, adp8870_bl_l5_dark_dim_show, + adp8870_bl_l5_dark_dim_store); + +static ssize_t adp8870_bl_l4_indoor_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM4); +} + +static ssize_t adp8870_bl_l4_indoor_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM4); +} +static DEVICE_ATTR(l4_indoor_dim, 0664, adp8870_bl_l4_indoor_dim_show, + adp8870_bl_l4_indoor_dim_store); + + +static ssize_t adp8870_bl_l3_office_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM3); +} + +static ssize_t adp8870_bl_l3_office_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM3); +} +static DEVICE_ATTR(l3_office_dim, 0664, adp8870_bl_l3_office_dim_show, + adp8870_bl_l3_office_dim_store); + +static ssize_t adp8870_bl_l2_bright_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM2); +} + +static ssize_t adp8870_bl_l2_bright_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM2); +} +static DEVICE_ATTR(l2_bright_dim, 0664, adp8870_bl_l2_bright_dim_show, + adp8870_bl_l2_bright_dim_store); + +static ssize_t adp8870_bl_l1_daylight_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM1); +} + +static ssize_t adp8870_bl_l1_daylight_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM1); +} +static DEVICE_ATTR(l1_daylight_dim, 0664, adp8870_bl_l1_daylight_dim_show, + adp8870_bl_l1_daylight_dim_store); + +#ifdef ADP8870_EXT_FEATURES +static ssize_t adp8870_bl_ambient_light_level_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + uint16_t ret_val; + + mutex_lock(&data->lock); + error = adp8870_read(data->client, ADP8870_PH1LEVL, ®_val); + if (error < 0) { + mutex_unlock(&data->lock); + return error; + } + ret_val = reg_val; + error = adp8870_read(data->client, ADP8870_PH1LEVH, ®_val); + mutex_unlock(&data->lock); + + if (error < 0) + return error; + + /* Return 13-bit conversion value for the first light sensor */ + ret_val += (reg_val & 0x1F) << 8; + + return sprintf(buf, "%u\n", ret_val); +} +static DEVICE_ATTR(ambient_light_level, 0444, + adp8870_bl_ambient_light_level_show, NULL); + +static ssize_t adp8870_bl_ambient_light_zone_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + + mutex_lock(&data->lock); + error = adp8870_read(data->client, ADP8870_CFGR, ®_val); + mutex_unlock(&data->lock); + + if (error < 0) + return error; + + return sprintf(buf, "%u\n", + ((reg_val >> CFGR_BLV_SHIFT) & CFGR_BLV_MASK) + 1); +} + +static ssize_t adp8870_bl_ambient_light_zone_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + unsigned long val; + uint8_t reg_val; + int ret; + + ret = strict_strtoul(buf, 10, &val); + if (ret) + return ret; + + if (val == 0) { + /* Enable automatic ambient light sensing */ + adp8870_set_bits(data->client, ADP8870_MDCR, CMP_AUTOEN); + } else if ((val > 0) && (val < 6)) { + /* Disable automatic ambient light sensing */ + adp8870_clr_bits(data->client, ADP8870_MDCR, CMP_AUTOEN); + + /* Set user supplied ambient light zone */ + mutex_lock(&data->lock); + adp8870_read(data->client, ADP8870_CFGR, ®_val); + reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT); + reg_val |= (val - 1) << CFGR_BLV_SHIFT; + adp8870_write(data->client, ADP8870_CFGR, reg_val); + mutex_unlock(&data->lock); + } + + return count; +} +static DEVICE_ATTR(ambient_light_zone, 0664, + adp8870_bl_ambient_light_zone_show, + adp8870_bl_ambient_light_zone_store); +#endif + +static struct attribute *adp8870_bl_attributes[] = { + &dev_attr_l5_dark_max.attr, + &dev_attr_l5_dark_dim.attr, + &dev_attr_l4_indoor_max.attr, + &dev_attr_l4_indoor_dim.attr, + &dev_attr_l3_office_max.attr, + &dev_attr_l3_office_dim.attr, + &dev_attr_l2_bright_max.attr, + &dev_attr_l2_bright_dim.attr, + &dev_attr_l1_daylight_max.attr, + &dev_attr_l1_daylight_dim.attr, +#ifdef ADP8870_EXT_FEATURES + &dev_attr_ambient_light_level.attr, + &dev_attr_ambient_light_zone.attr, +#endif + NULL +}; + +static const struct attribute_group adp8870_bl_attr_group = { + .attrs = adp8870_bl_attributes, +}; + +static int __devinit adp8870_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct backlight_properties props; + struct backlight_device *bl; + struct adp8870_bl *data; + struct adp8870_backlight_platform_data *pdata = + client->dev.platform_data; + uint8_t reg_val; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); + return -EIO; + } + + if (!pdata) { + dev_err(&client->dev, "no platform data?\n"); + return -EINVAL; + } + + ret = adp8870_read(client, ADP8870_MFDVID, ®_val); + if (ret < 0) + return -EIO; + + if (ADP8870_MANID(reg_val) != ADP8870_MANUFID) { + dev_err(&client->dev, "failed to probe\n"); + return -ENODEV; + } + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + data->revid = ADP8870_DEVID(reg_val); + data->client = client; + data->pdata = pdata; + data->id = id->driver_data; + data->current_brightness = 0; + i2c_set_clientdata(client, data); + + mutex_init(&data->lock); + + memset(&props, 0, sizeof(props)); + props.max_brightness = props.brightness = ADP8870_MAX_BRIGHTNESS; + bl = backlight_device_register(dev_driver_string(&client->dev), + &client->dev, data, &adp8870_bl_ops, &props); + if (IS_ERR(bl)) { + dev_err(&client->dev, "failed to register backlight\n"); + ret = PTR_ERR(bl); + goto out2; + } + + data->bl = bl; + + if (pdata->en_ambl_sens) + ret = sysfs_create_group(&bl->dev.kobj, + &adp8870_bl_attr_group); + + if (ret) { + dev_err(&client->dev, "failed to register sysfs\n"); + goto out1; + } + + ret = adp8870_bl_setup(bl); + if (ret) { + ret = -EIO; + goto out; + } + + backlight_update_status(bl); + + dev_info(&client->dev, "Rev.%d Backlight\n", data->revid); + + if (pdata->num_leds) + adp8870_led_probe(client); + + return 0; + +out: + if (data->pdata->en_ambl_sens) + sysfs_remove_group(&data->bl->dev.kobj, + &adp8870_bl_attr_group); +out1: + backlight_device_unregister(bl); +out2: + i2c_set_clientdata(client, NULL); + kfree(data); + + return ret; +} + +static int __devexit adp8870_remove(struct i2c_client *client) +{ + struct adp8870_bl *data = i2c_get_clientdata(client); + + adp8870_clr_bits(client, ADP8870_MDCR, NSTBY); + + if (data->led) + adp8870_led_remove(client); + + if (data->pdata->en_ambl_sens) + sysfs_remove_group(&data->bl->dev.kobj, + &adp8870_bl_attr_group); + + backlight_device_unregister(data->bl); + i2c_set_clientdata(client, NULL); + kfree(data); + + return 0; +} + +#ifdef CONFIG_PM +static int adp8870_i2c_suspend(struct i2c_client *client, pm_message_t message) +{ + adp8870_clr_bits(client, ADP8870_MDCR, NSTBY); + + return 0; +} + +static int adp8870_i2c_resume(struct i2c_client *client) +{ + adp8870_set_bits(client, ADP8870_MDCR, NSTBY); + + return 0; +} +#else +#define adp8870_i2c_suspend NULL +#define adp8870_i2c_resume NULL +#endif + +static const struct i2c_device_id adp8870_id[] = { + { "adp8870", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adp8870_id); + +static struct i2c_driver adp8870_driver = { + .driver = { + .name = KBUILD_MODNAME, + }, + .probe = adp8870_probe, + .remove = __devexit_p(adp8870_remove), + .suspend = adp8870_i2c_suspend, + .resume = adp8870_i2c_resume, + .id_table = adp8870_id, +}; + +static int __init adp8870_init(void) +{ + return i2c_add_driver(&adp8870_driver); +} +module_init(adp8870_init); + +static void __exit adp8870_exit(void) +{ + i2c_del_driver(&adp8870_driver); +} +module_exit(adp8870_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("ADP8870 Backlight driver"); +MODULE_ALIAS("platform:adp8870-backlight"); diff --git a/include/linux/i2c/adp8870.h b/include/linux/i2c/adp8870.h new file mode 100644 index 0000000..624dcec --- /dev/null +++ b/include/linux/i2c/adp8870.h @@ -0,0 +1,153 @@ +/* + * Definitions and platform data for Analog Devices + * Backlight drivers ADP8870 + * + * Copyright 2009-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __LINUX_I2C_ADP8870_H +#define __LINUX_I2C_ADP8870_H + +#define ID_ADP8870 8870 + +#define ADP8870_MAX_BRIGHTNESS 0x7F +#define FLAG_OFFT_SHIFT 8 + +/* + * LEDs subdevice platform data + */ + +#define ADP8870_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT) +#define ADP8870_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT) +#define ADP8870_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT) +#define ADP8870_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT) + +#define ADP8870_LED_ONT_200ms 0 +#define ADP8870_LED_ONT_600ms 1 +#define ADP8870_LED_ONT_800ms 2 +#define ADP8870_LED_ONT_1200ms 3 + +#define ADP8870_LED_D7 (7) +#define ADP8870_LED_D6 (6) +#define ADP8870_LED_D5 (5) +#define ADP8870_LED_D4 (4) +#define ADP8870_LED_D3 (3) +#define ADP8870_LED_D2 (2) +#define ADP8870_LED_D1 (1) + +/* + * Backlight subdevice platform data + */ + +#define ADP8870_BL_D7 (1 << 6) +#define ADP8870_BL_D6 (1 << 5) +#define ADP8870_BL_D5 (1 << 4) +#define ADP8870_BL_D4 (1 << 3) +#define ADP8870_BL_D3 (1 << 2) +#define ADP8870_BL_D2 (1 << 1) +#define ADP8870_BL_D1 (1 << 0) + +#define ADP8870_FADE_T_DIS 0 /* Fade Timer Disabled */ +#define ADP8870_FADE_T_300ms 1 /* 0.3 Sec */ +#define ADP8870_FADE_T_600ms 2 +#define ADP8870_FADE_T_900ms 3 +#define ADP8870_FADE_T_1200ms 4 +#define ADP8870_FADE_T_1500ms 5 +#define ADP8870_FADE_T_1800ms 6 +#define ADP8870_FADE_T_2100ms 7 +#define ADP8870_FADE_T_2400ms 8 +#define ADP8870_FADE_T_2700ms 9 +#define ADP8870_FADE_T_3000ms 10 +#define ADP8870_FADE_T_3500ms 11 +#define ADP8870_FADE_T_4000ms 12 +#define ADP8870_FADE_T_4500ms 13 +#define ADP8870_FADE_T_5000ms 14 +#define ADP8870_FADE_T_5500ms 15 /* 5.5 Sec */ + +#define ADP8870_FADE_LAW_LINEAR 0 +#define ADP8870_FADE_LAW_SQUARE 1 +#define ADP8870_FADE_LAW_CUBIC1 2 +#define ADP8870_FADE_LAW_CUBIC2 3 + +#define ADP8870_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */ +#define ADP8870_BL_AMBL_FILT_160ms 1 +#define ADP8870_BL_AMBL_FILT_320ms 2 +#define ADP8870_BL_AMBL_FILT_640ms 3 +#define ADP8870_BL_AMBL_FILT_1280ms 4 +#define ADP8870_BL_AMBL_FILT_2560ms 5 +#define ADP8870_BL_AMBL_FILT_5120ms 6 +#define ADP8870_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */ + +/* + * Blacklight current 0..30mA + */ +#define ADP8870_BL_CUR_mA(I) ((I * 127) / 30) + +/* + * L2 comparator current 0..1106uA + */ +#define ADP8870_L2_COMP_CURR_uA(I) ((I * 255) / 1106) + +/* + * L3 comparator current 0..551uA + */ +#define ADP8870_L3_COMP_CURR_uA(I) ((I * 255) / 551) + +/* + * L4 comparator current 0..275uA + */ +#define ADP8870_L4_COMP_CURR_uA(I) ((I * 255) / 275) + +/* + * L5 comparator current 0..138uA + */ +#define ADP8870_L5_COMP_CURR_uA(I) ((I * 255) / 138) + +struct adp8870_backlight_platform_data { + u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */ + u8 pwm_assign; /* 1 = Enables PWM mode */ + + u8 bl_fade_in; /* Backlight Fade-In Timer */ + u8 bl_fade_out; /* Backlight Fade-Out Timer */ + u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */ + + u8 en_ambl_sens; /* 1 = enable ambient light sensor */ + u8 abml_filt; /* Light sensor filter time */ + + u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l2_bright_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l2_bright_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l3_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l3_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l4_indoor_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l4_indor_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l5_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l5_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + + u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + u8 l4_trip; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ + u8 l4_hyst; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ + u8 l5_trip; /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + u8 l5_hyst; /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + + /** + * Independent Current Sinks / LEDS + * Sinks not assigned to the Backlight can be exposed to + * user space using the LEDS CLASS interface + */ + + int num_leds; + struct led_info *leds; + u8 led_fade_in; /* LED Fade-In Timer */ + u8 led_fade_out; /* LED Fade-Out Timer */ + u8 led_fade_law; /* fade-on/fade-off transfer characteristic */ + u8 led_on_time; +}; + +#endif /* __LINUX_I2C_ADP8870_H */ -- cgit v0.10.2