From 24fb06049af849934a30a06da78b7c75fac280df Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Sat, 26 Mar 2011 21:57:33 -0300 Subject: [media] STV0299 incorrect standby setting issues register 02 (MCR) Issues with Register 02 causing spurious channel locking from standby. Should have always bits 4 & 5 written to 1. Lower nibble not used in any current driver. Usage if necessary can be applied through initab to mcr_reg. stv0299 not out of standby before writing inittab. Signed-off-by: Malcolm Priestley Acked-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c index 4e3db3a..42684be 100644 --- a/drivers/media/dvb/frontends/stv0299.c +++ b/drivers/media/dvb/frontends/stv0299.c @@ -64,6 +64,7 @@ struct stv0299_state { fe_code_rate_t fec_inner; int errmode; u32 ucblocks; + u8 mcr_reg; }; #define STATUS_BER 0 @@ -457,6 +458,9 @@ static int stv0299_init (struct dvb_frontend* fe) dprintk("stv0299: init chip\n"); + stv0299_writeregI(state, 0x02, 0x30 | state->mcr_reg); + msleep(50); + for (i = 0; ; i += 2) { reg = state->config->inittab[i]; val = state->config->inittab[i+1]; @@ -464,6 +468,8 @@ static int stv0299_init (struct dvb_frontend* fe) break; if (reg == 0x0c && state->config->op0_off) val &= ~0x10; + if (reg == 0x2) + state->mcr_reg = val & 0xf; stv0299_writeregI(state, reg, val); } @@ -618,7 +624,7 @@ static int stv0299_sleep(struct dvb_frontend* fe) { struct stv0299_state* state = fe->demodulator_priv; - stv0299_writeregI(state, 0x02, 0x80); + stv0299_writeregI(state, 0x02, 0xb0 | state->mcr_reg); state->initialised = 0; return 0; @@ -680,7 +686,7 @@ struct dvb_frontend* stv0299_attach(const struct stv0299_config* config, state->errmode = STATUS_BER; /* check if the demod is there */ - stv0299_writeregI(state, 0x02, 0x34); /* standby off */ + stv0299_writeregI(state, 0x02, 0x30); /* standby off */ msleep(200); id = stv0299_readreg(state, 0x00); -- cgit v0.10.2