From 1038a00b458997661bcd0e780a24dc280a8841fc Mon Sep 17 00:00:00 2001 From: Nick Pelly Date: Wed, 3 Feb 2010 11:42:26 -0800 Subject: Bluetooth: Fallback eSCO to SCO on error 0x1a (Unsupported Remote Feature) General Motors carkits that use LGE BT chipsets return this error code when an eSCO is attempted, despite advertising eSCO support. 2009-08-13 14:41:39.755518 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 1 voice setting 0x0060 2009-08-13 14:41:39.757563 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2009-08-13 14:41:39.789484 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x1a handle 257 bdaddr 00:1E:B2:23:5E:B3 type eSCO Error: Unsupported Remote Feature / Unsupported LMP Feature Signed-off-by: Jaikumar Ganesh Signed-off-by: Nick Pelly Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 28517ba..592da5c 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1699,6 +1699,7 @@ static inline void hci_sync_conn_complete_evt(struct hci_dev *hdev, struct sk_bu break; case 0x1c: /* SCO interval rejected */ + case 0x1a: /* Unsupported Remote Feature */ case 0x1f: /* Unspecified error */ if (conn->out && conn->attempt < 2) { conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) | -- cgit v0.10.2 From 485f1eff73a7b932fd3abb0dfcf804e1a1f59025 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 3 Feb 2010 15:52:18 -0800 Subject: Bluetooth: Fix sleeping function in RFCOMM within invalid context With the commit 9e726b17422bade75fba94e625cd35fd1353e682 the rfcomm_session_put() gets accidentially called from a timeout callback and results in this: BUG: sleeping function called from invalid context at net/core/sock.c:1897 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper Pid: 0, comm: swapper Tainted: P 2.6.32 #31 Call Trace: [] __might_sleep+0xf8/0xfa [] lock_sock_nested+0x29/0xc4 [] lock_sock+0xb/0xd [l2cap] [] l2cap_sock_shutdown+0x1c/0x76 [l2cap] [] ? clockevents_program_event+0x75/0x7e [] ? tick_dev_program_event+0x37/0xa5 [] l2cap_sock_release+0x27/0x67 [l2cap] [] sock_release+0x1a/0x67 [] rfcomm_session_del+0x34/0x53 [rfcomm] [] rfcomm_session_put+0x14/0x16 [rfcomm] [] rfcomm_session_timeout+0xe/0x1a [rfcomm] [] run_timer_softirq+0x1e2/0x29a [] ? rfcomm_session_timeout+0x0/0x1a [rfcomm] [] __do_softirq+0xfe/0x1c5 [] ? timer_interrupt+0x1a/0x21 [] call_softirq+0x1c/0x28 [] do_softirq+0x33/0x6b [] irq_exit+0x36/0x85 [] do_IRQ+0xa6/0xbd [] ret_from_intr+0x0/0xa [] ? acpi_idle_enter_bm+0x269/0x294 [] ? acpi_idle_enter_bm+0x25f/0x294 [] ? cpuidle_idle_call+0x97/0x107 [] ? cpu_idle+0x53/0xaa [] ? rest_init+0x7a/0x7c [] ? start_kernel+0x389/0x394 [] ? x86_64_start_reservations+0xac/0xb0 [] ? x86_64_start_kernel+0xe4/0xeb To fix this, the rfcomm_session_put() needs to be moved out of rfcomm_session_timeout() into rfcomm_process_sessions(). In that context it is perfectly fine to sleep and disconnect the socket. Signed-off-by: Marcel Holtmann Tested-by: David John diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index fc5ee32..2b50637 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -252,7 +252,6 @@ static void rfcomm_session_timeout(unsigned long arg) BT_DBG("session %p state %ld", s, s->state); set_bit(RFCOMM_TIMED_OUT, &s->flags); - rfcomm_session_put(s); rfcomm_schedule(RFCOMM_SCHED_TIMEO); } @@ -1920,6 +1919,7 @@ static inline void rfcomm_process_sessions(void) if (test_and_clear_bit(RFCOMM_TIMED_OUT, &s->flags)) { s->state = BT_DISCONN; rfcomm_send_disc(s, 0); + rfcomm_session_put(s); continue; } -- cgit v0.10.2 From 6c2718da59613d76013b501bf0f8bcf9d7794b2d Mon Sep 17 00:00:00 2001 From: Nick Pelly Date: Wed, 3 Feb 2010 16:18:36 -0800 Subject: Bluetooth: Do not call rfcomm_session_put() for RFCOMM UA on closed socket When processing a RFCOMM UA frame when the socket is closed and we were not the RFCOMM initiator would cause rfcomm_session_put() to be called twice during rfcomm_process_rx(). This would cause a kernel panic in rfcomm_session_close() then. This could be easily reproduced during disconnect with devices such as Motorola H270 that send RFCOMM UA followed quickly by L2CAP disconnect request. This trace for this looks like: 2009-09-21 17:22:37.788895 < ACL data: handle 1 flags 0x02 dlen 8 L2CAP(d): cid 0x0041 len 4 [psm 3] RFCOMM(s): DISC: cr 0 dlci 20 pf 1 ilen 0 fcs 0x7d 2009-09-21 17:22:37.906204 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2009-09-21 17:22:37.933090 > ACL data: handle 1 flags 0x02 dlen 8 L2CAP(d): cid 0x0040 len 4 [psm 3] RFCOMM(s): UA: cr 0 dlci 20 pf 1 ilen 0 fcs 0x57 2009-09-21 17:22:38.636764 < ACL data: handle 1 flags 0x02 dlen 8 L2CAP(d): cid 0x0041 len 4 [psm 3] RFCOMM(s): DISC: cr 0 dlci 0 pf 1 ilen 0 fcs 0x9c 2009-09-21 17:22:38.744125 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2009-09-21 17:22:38.763687 > ACL data: handle 1 flags 0x02 dlen 8 L2CAP(d): cid 0x0040 len 4 [psm 3] RFCOMM(s): UA: cr 0 dlci 0 pf 1 ilen 0 fcs 0xb6 2009-09-21 17:22:38.783554 > ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0041 Avoid calling rfcomm_session_put() twice by skipping this call in rfcomm_recv_ua() if the socket is closed. Signed-off-by: Nick Pelly Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 2b50637..89f4a59 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -1150,7 +1150,11 @@ static int rfcomm_recv_ua(struct rfcomm_session *s, u8 dlci) break; case BT_DISCONN: - rfcomm_session_put(s); + /* When socket is closed and we are not RFCOMM + * initiator rfcomm_process_rx already calls + * rfcomm_session_put() */ + if (s->sock->sk->sk_state != BT_CLOSED) + rfcomm_session_put(s); break; } } -- cgit v0.10.2 From 88d1a0cf659438a66135661538ae332b23f8635a Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 4 Feb 2010 09:55:51 +0900 Subject: Bluetooth: Fix memory leak in Marvell BT-over-SDIO driver Signed-off-by: Yoichi Yuasa Signed-off-by: Marcel Holtmann diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index f36defa..57d965b 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -808,6 +808,7 @@ static int btmrvl_sdio_host_to_card(struct btmrvl_private *priv, exit: sdio_release_host(card->func); + kfree(tmpbuf); return ret; } -- cgit v0.10.2 From c390216b3e868b16d8154939f4b6f8c16dbd9a9f Mon Sep 17 00:00:00 2001 From: Nick Pelly Date: Fri, 13 Nov 2009 14:16:32 -0800 Subject: Bluetooth: Enter active mode before establishing a SCO link. When in sniff mode with a long interval time (1.28s) it can take 4+ seconds to establish a SCO link. Fix by requesting active mode before requesting SCO connection. This improves SCO setup time to ~500ms. Bluetooth headsets that use a long interval time, and exhibit the long SCO connection time include Motorola H790, HX1 and H17. They have a CSR 2.1 chipset. Verified this behavior and fix with host Bluetooth chipsets: BCM4329 and TI1271. 2009-10-13 14:17:46.183722 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 1 mode 0x02 interval 2048 Mode: Sniff 2009-10-13 14:17:53.436285 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 1 voice setting 0x0060 2009-10-13 14:17:53.445593 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2009-10-13 14:17:57.788855 > HCI Event: Synchronous Connect Complete 0x2c) plen 17 status 0x00 handle 257 bdaddr 00:1A:0E:F1:A4:7F type eSCO Air mode: CVSD Signed-off-by: Nick Pelly Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index b7c4224..b10e3cd 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -377,6 +377,9 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 if (acl->state == BT_CONNECTED && (sco->state == BT_OPEN || sco->state == BT_CLOSED)) { + acl->power_save = 1; + hci_conn_enter_active_mode(acl); + if (lmp_esco_capable(hdev)) hci_setup_sync(sco, acl->handle); else -- cgit v0.10.2 From 15c697ce1c5b408c5e20dcdc6aea2968d1125b75 Mon Sep 17 00:00:00 2001 From: Michael Poole Date: Fri, 5 Feb 2010 12:23:43 -0500 Subject: Bluetooth: Keep a copy of each HID device's report descriptor The report descriptor is read by user space (via the Service Discovery Protocol), so it is only available during the ioctl to connect. However, the HID probe function that needs the descriptor might not be called until a specific module is loaded. Keep a copy of the descriptor so it is available for later use. Signed-off-by: Michael Poole Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 6cf526d..fc6ec1e 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -703,29 +703,9 @@ static void hidp_close(struct hid_device *hid) static int hidp_parse(struct hid_device *hid) { struct hidp_session *session = hid->driver_data; - struct hidp_connadd_req *req = session->req; - unsigned char *buf; - int ret; - - buf = kmalloc(req->rd_size, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - if (copy_from_user(buf, req->rd_data, req->rd_size)) { - kfree(buf); - return -EFAULT; - } - - ret = hid_parse_report(session->hid, buf, req->rd_size); - - kfree(buf); - - if (ret) - return ret; - - session->req = NULL; - return 0; + return hid_parse_report(session->hid, session->rd_data, + session->rd_size); } static int hidp_start(struct hid_device *hid) @@ -770,12 +750,24 @@ static int hidp_setup_hid(struct hidp_session *session, bdaddr_t src, dst; int err; + session->rd_data = kzalloc(req->rd_size, GFP_KERNEL); + if (!session->rd_data) + return -ENOMEM; + + if (copy_from_user(session->rd_data, req->rd_data, req->rd_size)) { + err = -EFAULT; + goto fault; + } + session->rd_size = req->rd_size; + hid = hid_allocate_device(); - if (IS_ERR(hid)) - return PTR_ERR(hid); + if (IS_ERR(hid)) { + err = PTR_ERR(hid); + goto fault; + } session->hid = hid; - session->req = req; + hid->driver_data = session; baswap(&src, &bt_sk(session->ctrl_sock->sk)->src); @@ -806,6 +798,10 @@ failed: hid_destroy_device(hid); session->hid = NULL; +fault: + kfree(session->rd_data); + session->rd_data = NULL; + return err; } @@ -900,6 +896,9 @@ unlink: session->hid = NULL; } + kfree(session->rd_data); + session->rd_data = NULL; + purge: skb_queue_purge(&session->ctrl_transmit); skb_queue_purge(&session->intr_transmit); diff --git a/net/bluetooth/hidp/hidp.h b/net/bluetooth/hidp/hidp.h index faf3d74..a4e215d 100644 --- a/net/bluetooth/hidp/hidp.h +++ b/net/bluetooth/hidp/hidp.h @@ -154,7 +154,9 @@ struct hidp_session { struct sk_buff_head ctrl_transmit; struct sk_buff_head intr_transmit; - struct hidp_connadd_req *req; + /* Report descriptor */ + __u8 *rd_data; + uint rd_size; }; static inline void hidp_schedule(struct hidp_session *session) -- cgit v0.10.2