From 45db339cd2b138fba993013b5d73049fd3384e44 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Fri, 4 May 2012 18:27:32 -0700 Subject: brcmfmac: replace brcmf_sdcard_cfg_read with brcmf_sdio_regrb Use the newly introduced brcmf_sdio_regrb to replace brcmf_sdcard_cfg_read as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index 5e719d8..fc5c628 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -85,8 +85,7 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) sdiodev->irq_wake = true; /* must configure SDIO_CCCR_IENx to enable irq */ - data = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_0, - SDIO_CCCR_IENx, &ret); + data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret); data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1; brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx, data, &ret); @@ -158,29 +157,6 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev) } #endif /* CONFIG_BRCMFMAC_SDIO_OOB */ -u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr, - int *err) -{ - int status; - s32 retry = 0; - u8 data = 0; - - do { - if (retry) /* wait for 1 ms till bus get settled down */ - udelay(1000); - status = brcmf_sdioh_request_byte(sdiodev, SDIOH_READ, fnc_num, - addr, (u8 *) &data); - } while (status != 0 - && (retry++ < SDIOH_API_ACCESS_RETRY_LIMIT)); - if (err) - *err = status; - - brcmf_dbg(INFO, "fun = %d, addr = 0x%x, u8data = 0x%x\n", - fnc_num, addr, data); - - return data; -} - void brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr, u8 data, int *err) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 7ed215d..85f277c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -704,8 +704,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) } /* Check current status */ - clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + clkctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err) { brcmf_dbg(ERROR, "HT Avail read error: %d\n", err); return -EBADE; @@ -714,9 +714,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) /* Go to pending and await interrupt if appropriate */ if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) { /* Allow only clock-available interrupt */ - devctl = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_dbg(ERROR, "Devctl error setting CA: %d\n", err); @@ -732,8 +731,7 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) return 0; } else if (bus->clkstate == CLK_PENDING) { /* Cancel CA-only interrupt filter */ - devctl = - brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, + devctl = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_DEVICE_CTL, &err); devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, @@ -744,10 +742,9 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) timeout = jiffies + msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000); while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) { - clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, - &err); + clkctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + &err); if (time_after(jiffies, timeout)) break; else @@ -780,9 +777,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) if (bus->clkstate == CLK_PENDING) { /* Cancel CA-only interrupt filter */ - devctl = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, devctl, &err); @@ -1046,10 +1042,10 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) /* Wait until the packet has been flushed (device/FIFO stable) */ for (lastrbc = retries = 0xffff; retries > 0; retries--) { - hi = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_RFRAMEBCHI, NULL); - lo = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_RFRAMEBCLO, NULL); + hi = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_RFRAMEBCHI, NULL); + lo = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_RFRAMEBCLO, NULL); bus->f1regdata += 2; if ((hi == 0) && (lo == 0)) @@ -2184,14 +2180,10 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt, for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCHI, - NULL); - lo = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCLO, - NULL); + hi = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, NULL); + lo = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, NULL); bus->f1regdata += 2; if ((hi == 0) && (lo == 0)) break; @@ -2310,8 +2302,8 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; /* Force clocks on backplane to be sure F2 interrupt propagates */ - saveclk = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + saveclk = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (!err) { brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, @@ -2393,8 +2385,8 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) #ifdef DEBUG /* Check for inconsistent device control */ - devctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err); bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; @@ -2402,8 +2394,8 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) #endif /* DEBUG */ /* Read CSR, if clock on switch to AVAIL, else ignore */ - clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + clkctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err) { brcmf_dbg(ERROR, "error reading CSR: %d\n", err); @@ -2414,9 +2406,8 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) devctl, clkctl); if (SBSDIO_HTAV(clkctl)) { - devctl = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err); @@ -2552,14 +2543,12 @@ clkwait: for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCHI, - NULL); - lo = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCLO, - NULL); + hi = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, + NULL); + lo = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, + NULL); bus->f1regdata += 2; if ((hi == 0) && (lo == 0)) break; @@ -2892,12 +2881,10 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCHI, - NULL); - lo = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCLO, - NULL); + hi = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, NULL); + lo = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, NULL); bus->f1regdata += 2; if (hi == 0 && lo == 0) break; @@ -3471,9 +3458,8 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) goto exit; /* Force clocks on backplane to be sure F2 interrupt propagates */ - saveclk = - brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + saveclk = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (!err) { brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, @@ -3495,8 +3481,8 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY); ready = 0; while (enable != ready) { - ready = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_0, - SDIO_CCCR_IORx, NULL); + ready = brcmf_sdio_regrb(bus->sdiodev, + SDIO_CCCR_IORx, NULL); if (time_after(jiffies, timeout)) break; else if (time_after(jiffies, timeout - BRCMF_WAIT_F2RDY + 50)) @@ -3605,9 +3591,9 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) if (!bus->dpc_sched) { u8 devpend; - devpend = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_0, SDIO_CCCR_INTx, - NULL); + devpend = brcmf_sdio_regrb(bus->sdiodev, + SDIO_CCCR_INTx, + NULL); intstatus = devpend & (INTR_STATUS_FUNC1 | INTR_STATUS_FUNC2); @@ -3747,8 +3733,7 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) SBSDIO_FUNC1_CHIPCLKCSR, BRCMF_INIT_CLKCTL1, &err); if (!err) - clkctl = - brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, + clkctl = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) { diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c index 3ced613..654b7e0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c @@ -434,8 +434,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) /* If register supported, wait for ALPAvail and then force ALP */ /* This may take up to 15 milliseconds */ - clkval = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, NULL); + clkval = brcmf_sdio_regrb(sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, NULL); if ((clkval & ~SBSDIO_AVBITS) != clkset) { brcmf_dbg(ERROR, "ChipClkCSR access: wrote 0x%02x read 0x%02x\n", @@ -443,8 +443,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) return -EACCES; } - SPINWAIT(((clkval = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, NULL)), + SPINWAIT(((clkval = brcmf_sdio_regrb(sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, NULL)), !SBSDIO_ALPAV(clkval)), PMU_MAX_TRANSITION_DLY); if (!SBSDIO_ALPAV(clkval)) { diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h index d6ed2d8..decfe0d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h @@ -174,8 +174,6 @@ extern int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev); * data: data byte to write * err: pointer to error code (or NULL) */ -extern u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint func, - u32 addr, int *err); extern void brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint func, u32 addr, u8 data, int *err); -- cgit v0.10.2