From 5c7b0531299dad4255ff5c5106d060150cda75a4 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Mon, 2 Jul 2012 20:04:01 +0200 Subject: NFC: Add initial Sony RC-S360 support to pn533 Sony RC-S360 is also known as the Sony PaSoRi contactless reader. Only type 2, 3 and 4 tag reading is supported at the moment. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 9ac829e..37786ff 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -38,9 +38,42 @@ #define SCM_VENDOR_ID 0x4E6 #define SCL3711_PRODUCT_ID 0x5591 +#define SONY_VENDOR_ID 0x054c +#define PASORI_PRODUCT_ID 0x02e1 + +#define PN533_QUIRKS_TYPE_A BIT(0) +#define PN533_QUIRKS_TYPE_F BIT(1) +#define PN533_QUIRKS_DEP BIT(2) +#define PN533_QUIRKS_RAW_EXCHANGE BIT(3) + +#define PN533_DEVICE_STD 0x1 +#define PN533_DEVICE_PASORI 0x2 + +#define PN533_ALL_PROTOCOLS (NFC_PROTO_JEWEL_MASK | NFC_PROTO_MIFARE_MASK \ + | NFC_PROTO_FELICA_MASK | NFC_PROTO_ISO14443_MASK \ + | NFC_PROTO_NFC_DEP_MASK) + +#define PN533_NO_TYPE_B_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \ + NFC_PROTO_MIFARE_MASK | \ + NFC_PROTO_FELICA_MASK | \ + NFC_PROTO_NFC_DEP_MASK) + static const struct usb_device_id pn533_table[] = { - { USB_DEVICE(PN533_VENDOR_ID, PN533_PRODUCT_ID) }, - { USB_DEVICE(SCM_VENDOR_ID, SCL3711_PRODUCT_ID) }, + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = PN533_VENDOR_ID, + .idProduct = PN533_PRODUCT_ID, + .driver_info = PN533_DEVICE_STD, + }, + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = SCM_VENDOR_ID, + .idProduct = SCL3711_PRODUCT_ID, + .driver_info = PN533_DEVICE_STD, + }, + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = SONY_VENDOR_ID, + .idProduct = PASORI_PRODUCT_ID, + .driver_info = PN533_DEVICE_PASORI, + }, { } }; MODULE_DEVICE_TABLE(usb, pn533_table); @@ -72,6 +105,7 @@ MODULE_DEVICE_TABLE(usb, pn533_table); #define PN533_CMD_GET_FIRMWARE_VERSION 0x02 #define PN533_CMD_RF_CONFIGURATION 0x32 #define PN533_CMD_IN_DATA_EXCHANGE 0x40 +#define PN533_CMD_IN_COMM_THRU 0x42 #define PN533_CMD_IN_LIST_PASSIVE_TARGET 0x4A #define PN533_CMD_IN_ATR 0x50 #define PN533_CMD_IN_RELEASE 0x52 @@ -109,6 +143,7 @@ struct pn533_fw_version { /* PN533_CMD_RF_CONFIGURATION */ #define PN533_CFGITEM_TIMING 0x02 #define PN533_CFGITEM_MAX_RETRIES 0x05 +#define PN533_CFGITEM_PASORI 0x82 #define PN533_CONFIG_TIMING_102 0xb #define PN533_CONFIG_TIMING_204 0xc @@ -344,6 +379,8 @@ struct pn533 { u8 tgt_available_prots; u8 tgt_active_prot; u8 tgt_mode; + + u32 device_type; }; struct pn533_frame { @@ -1768,13 +1805,31 @@ static int pn533_build_tx_frame(struct pn533 *dev, struct sk_buff *skb, } if (target == true) { - skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN); - out_frame = (struct pn533_frame *) skb->data; + switch (dev->device_type) { + case PN533_DEVICE_STD: + skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN); + out_frame = (struct pn533_frame *) skb->data; + pn533_tx_frame_init(out_frame, + PN533_CMD_IN_DATA_EXCHANGE); + tg = 1; + memcpy(PN533_FRAME_CMD_PARAMS_PTR(out_frame), + &tg, sizeof(u8)); + out_frame->datalen += sizeof(u8); + break; + + case PN533_DEVICE_PASORI: + skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN - 1); + out_frame = (struct pn533_frame *) skb->data; + pn533_tx_frame_init(out_frame, PN533_CMD_IN_COMM_THRU); + + break; + + default: + nfc_dev_err(&dev->interface->dev, + "Unknown device type %d", dev->device_type); + return -EINVAL; + } - pn533_tx_frame_init(out_frame, PN533_CMD_IN_DATA_EXCHANGE); - tg = 1; - memcpy(PN533_FRAME_CMD_PARAMS_PTR(out_frame), &tg, sizeof(u8)); - out_frame->datalen += sizeof(u8); } else { skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN - 1); out_frame = (struct pn533_frame *) skb->data; @@ -2101,7 +2156,28 @@ static int pn533_set_configuration(struct pn533 *dev, u8 cfgitem, u8 *cfgdata, return rc; } -struct nfc_ops pn533_nfc_ops = { +static int pn533_fw_reset(struct pn533 *dev) +{ + int rc; + u8 *params; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + pn533_tx_frame_init(dev->out_frame, 0x18); + + params = PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame); + params[0] = 0x1; + dev->out_frame->datalen += 1; + + pn533_tx_frame_finish(dev->out_frame); + + rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, + dev->in_maxlen); + + return rc; +} + +static struct nfc_ops pn533_nfc_ops = { .dev_up = NULL, .dev_down = NULL, .dep_link_up = pn533_dep_link_up, @@ -2114,6 +2190,84 @@ struct nfc_ops pn533_nfc_ops = { .tm_send = pn533_tm_send, }; +static int pn533_setup(struct pn533 *dev) +{ + struct pn533_config_max_retries max_retries; + struct pn533_config_timing timing; + u8 pasori_cfg[3] = {0x08, 0x01, 0x08}; + int rc; + + switch (dev->device_type) { + case PN533_DEVICE_STD: + max_retries.mx_rty_atr = PN533_CONFIG_MAX_RETRIES_ENDLESS; + max_retries.mx_rty_psl = 2; + max_retries.mx_rty_passive_act = + PN533_CONFIG_MAX_RETRIES_NO_RETRY; + + timing.rfu = PN533_CONFIG_TIMING_102; + timing.atr_res_timeout = PN533_CONFIG_TIMING_204; + timing.dep_timeout = PN533_CONFIG_TIMING_409; + + break; + + case PN533_DEVICE_PASORI: + max_retries.mx_rty_atr = 0x2; + max_retries.mx_rty_psl = 0x1; + max_retries.mx_rty_passive_act = + PN533_CONFIG_MAX_RETRIES_NO_RETRY; + + timing.rfu = PN533_CONFIG_TIMING_102; + timing.atr_res_timeout = PN533_CONFIG_TIMING_102; + timing.dep_timeout = PN533_CONFIG_TIMING_204; + + break; + + default: + nfc_dev_err(&dev->interface->dev, "Unknown device type %d\n", + dev->device_type); + return -EINVAL; + } + + rc = pn533_set_configuration(dev, PN533_CFGITEM_MAX_RETRIES, + (u8 *)&max_retries, sizeof(max_retries)); + if (rc) { + nfc_dev_err(&dev->interface->dev, + "Error on setting MAX_RETRIES config"); + return rc; + } + + + rc = pn533_set_configuration(dev, PN533_CFGITEM_TIMING, + (u8 *)&timing, sizeof(timing)); + if (rc) { + nfc_dev_err(&dev->interface->dev, + "Error on setting RF timings"); + return rc; + } + + switch (dev->device_type) { + case PN533_DEVICE_STD: + break; + + case PN533_DEVICE_PASORI: + pn533_fw_reset(dev); + + rc = pn533_set_configuration(dev, PN533_CFGITEM_PASORI, + pasori_cfg, 3); + if (rc) { + nfc_dev_err(&dev->interface->dev, + "Error while settings PASORI config"); + return rc; + } + + pn533_fw_reset(dev); + + break; + } + + return 0; +} + static int pn533_probe(struct usb_interface *interface, const struct usb_device_id *id) { @@ -2121,8 +2275,6 @@ static int pn533_probe(struct usb_interface *interface, struct pn533 *dev; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; - struct pn533_config_max_retries max_retries; - struct pn533_config_timing timing; int in_endpoint = 0; int out_endpoint = 0; int rc = -ENOMEM; @@ -2208,10 +2360,22 @@ static int pn533_probe(struct usb_interface *interface, nfc_dev_info(&dev->interface->dev, "NXP PN533 firmware ver %d.%d now" " attached", fw_ver->ver, fw_ver->rev); - protocols = NFC_PROTO_JEWEL_MASK - | NFC_PROTO_MIFARE_MASK | NFC_PROTO_FELICA_MASK - | NFC_PROTO_ISO14443_MASK - | NFC_PROTO_NFC_DEP_MASK; + dev->device_type = id->driver_info; + switch (dev->device_type) { + case PN533_DEVICE_STD: + protocols = PN533_ALL_PROTOCOLS; + break; + + case PN533_DEVICE_PASORI: + protocols = PN533_NO_TYPE_B_PROTOCOLS; + break; + + default: + nfc_dev_err(&dev->interface->dev, "Unknown device type %d\n", + dev->device_type); + rc = -EINVAL; + goto destroy_wq; + } dev->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols, PN533_CMD_DATAEXCH_HEAD_LEN, @@ -2226,30 +2390,9 @@ static int pn533_probe(struct usb_interface *interface, if (rc) goto free_nfc_dev; - max_retries.mx_rty_atr = PN533_CONFIG_MAX_RETRIES_ENDLESS; - max_retries.mx_rty_psl = 2; - max_retries.mx_rty_passive_act = PN533_CONFIG_MAX_RETRIES_NO_RETRY; - - rc = pn533_set_configuration(dev, PN533_CFGITEM_MAX_RETRIES, - (u8 *) &max_retries, sizeof(max_retries)); - - if (rc) { - nfc_dev_err(&dev->interface->dev, "Error on setting MAX_RETRIES" - " config"); - goto unregister_nfc_dev; - } - - timing.rfu = PN533_CONFIG_TIMING_102; - timing.atr_res_timeout = PN533_CONFIG_TIMING_204; - timing.dep_timeout = PN533_CONFIG_TIMING_409; - - rc = pn533_set_configuration(dev, PN533_CFGITEM_TIMING, - (u8 *) &timing, sizeof(timing)); - if (rc) { - nfc_dev_err(&dev->interface->dev, - "Error on setting RF timings"); + rc = pn533_setup(dev); + if (rc) goto unregister_nfc_dev; - } return 0; -- cgit v0.10.2