From 91ea8207168793b365322be3c90a4ee9e8b03ed4 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 5 Jun 2013 20:50:01 +0000 Subject: parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 (part 2) Make sure that we really return -1 (instead of 0x00ff) as node id for page frame numbers which are not physically available. This finally fixes the kernel panic when running cat /proc/kpageflags /proc/kpagecount. Theoretically this patch now limits the number of physical memory ranges to 127 instead of 254, but currently we have MAX_PHYSMEM_RANGES hardcoded to 8 which is sufficient for all existing parisc machines. Signed-off-by: Helge Deller diff --git a/arch/parisc/include/asm/mmzone.h b/arch/parisc/include/asm/mmzone.h index cc50d33..b6b34a0 100644 --- a/arch/parisc/include/asm/mmzone.h +++ b/arch/parisc/include/asm/mmzone.h @@ -27,7 +27,7 @@ extern struct node_map_data node_data[]; #define PFNNID_SHIFT (30 - PAGE_SHIFT) #define PFNNID_MAP_MAX 512 /* support 512GB */ -extern unsigned char pfnnid_map[PFNNID_MAP_MAX]; +extern signed char pfnnid_map[PFNNID_MAP_MAX]; #ifndef CONFIG_64BIT #define pfn_is_io(pfn) ((pfn & (0xf0000000UL >> PAGE_SHIFT)) == (0xf0000000UL >> PAGE_SHIFT)) @@ -46,7 +46,7 @@ static inline int pfn_to_nid(unsigned long pfn) i = pfn >> PFNNID_SHIFT; BUG_ON(i >= ARRAY_SIZE(pfnnid_map)); - return (int)pfnnid_map[i]; + return pfnnid_map[i]; } static inline int pfn_valid(int pfn) diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 1c96564..505b56c 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -47,7 +47,7 @@ pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data..vm0.pt #ifdef CONFIG_DISCONTIGMEM struct node_map_data node_data[MAX_NUMNODES] __read_mostly; -unsigned char pfnnid_map[PFNNID_MAP_MAX] __read_mostly; +signed char pfnnid_map[PFNNID_MAP_MAX] __read_mostly; #endif static struct resource data_resource = { -- cgit v0.10.2 From 9a66d1869d90f13fbaf83dcce5b1aeec86fbc699 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Sun, 9 Jun 2013 23:00:21 +0200 Subject: parisc: fix serial ports on C8000 workstation The C8000 workstation (64 bit kernel only) has a somewhat different serial port configuration than other models. Thomas Bogendoerfer sent a patch to fix this in September 2010, which was now minimally modified by me. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c index 9e2d2e4..8722756 100644 --- a/arch/parisc/kernel/hardware.c +++ b/arch/parisc/kernel/hardware.c @@ -1205,6 +1205,7 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"}, {HPHW_FIO, 0x004, 0x00340, 0x0, "BARCO CX4500 VME Grphx Cnsl"}, {HPHW_FIO, 0x004, 0x00360, 0x0, "Hughes TOG VME FDDI"}, + {HPHW_FIO, 0x076, 0x000AD, 0x00, "Crestone Peak RS-232"}, {HPHW_IOA, 0x185, 0x0000B, 0x00, "Java BC Summit Port"}, {HPHW_IOA, 0x1FF, 0x0000B, 0x00, "Hitachi Ghostview Summit Port"}, {HPHW_IOA, 0x580, 0x0000B, 0x10, "U2-IOA BC Runway Port"}, diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 9544cdc..e79e006 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -811,6 +811,70 @@ int iosapic_fixup_irq(void *isi_obj, struct pci_dev *pcidev) return pcidev->irq; } +static struct iosapic_info *first_isi = NULL; + +#ifdef CONFIG_64BIT +int iosapic_serial_irq(int num) +{ + struct iosapic_info *isi = first_isi; + struct irt_entry *irte = NULL; /* only used if PAT PDC */ + struct vector_info *vi; + int isi_line; /* line used by device */ + + /* lookup IRT entry for isi/slot/pin set */ + irte = &irt_cell[num]; + + DBG_IRT("iosapic_serial_irq(): irte %p %x %x %x %x %x %x %x %x\n", + irte, + irte->entry_type, + irte->entry_length, + irte->polarity_trigger, + irte->src_bus_irq_devno, + irte->src_bus_id, + irte->src_seg_id, + irte->dest_iosapic_intin, + (u32) irte->dest_iosapic_addr); + isi_line = irte->dest_iosapic_intin; + + /* get vector info for this input line */ + vi = isi->isi_vector + isi_line; + DBG_IRT("iosapic_serial_irq: line %d vi 0x%p\n", isi_line, vi); + + /* If this IRQ line has already been setup, skip it */ + if (vi->irte) + goto out; + + vi->irte = irte; + + /* + * Allocate processor IRQ + * + * XXX/FIXME The txn_alloc_irq() code and related code should be + * moved to enable_irq(). That way we only allocate processor IRQ + * bits for devices that actually have drivers claiming them. + * Right now we assign an IRQ to every PCI device present, + * regardless of whether it's used or not. + */ + vi->txn_irq = txn_alloc_irq(8); + + if (vi->txn_irq < 0) + panic("I/O sapic: couldn't get TXN IRQ\n"); + + /* enable_irq() will use txn_* to program IRdT */ + vi->txn_addr = txn_alloc_addr(vi->txn_irq); + vi->txn_data = txn_alloc_data(vi->txn_irq); + + vi->eoi_addr = isi->addr + IOSAPIC_REG_EOI; + vi->eoi_data = cpu_to_le32(vi->txn_data); + + cpu_claim_irq(vi->txn_irq, &iosapic_interrupt_type, vi); + + out: + + return vi->txn_irq; +} +#endif + /* ** squirrel away the I/O Sapic Version @@ -877,6 +941,8 @@ void *iosapic_register(unsigned long hpa) vip->irqline = (unsigned char) cnt; vip->iosapic = isi; } + if (!first_isi) + first_isi = isi; return isi; } diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c index 097dff9..bb91b47 100644 --- a/drivers/tty/serial/8250/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -30,6 +30,12 @@ static int __init serial_init_chip(struct parisc_device *dev) unsigned long address; int err; +#ifdef CONFIG_64BIT + extern int iosapic_serial_irq(int cellnum); + if (!dev->irq && (dev->id.sversion == 0xad)) + dev->irq = iosapic_serial_irq(dev->mod_index-1); +#endif + if (!dev->irq) { /* We find some unattached serial ports by walking native * busses. These should be silently ignored. Otherwise, @@ -51,7 +57,8 @@ static int __init serial_init_chip(struct parisc_device *dev) memset(&uart, 0, sizeof(uart)); uart.port.iotype = UPIO_MEM; /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */ - uart.port.uartclk = 7272727; + uart.port.uartclk = (dev->id.sversion != 0xad) ? + 7272727 : 1843200; uart.port.mapbase = address; uart.port.membase = ioremap_nocache(address, 16); uart.port.irq = dev->irq; @@ -73,6 +80,7 @@ static struct parisc_device_id serial_tbl[] = { { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x000ad }, { 0 } }; -- cgit v0.10.2 From 2cc7138f4347df939ce03f313e3d87794bab36f8 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Fri, 14 Jun 2013 09:05:41 +0200 Subject: parisc: provide pci_mmap_page_range() for parisc pci_mmap_page_range() is needed for X11-server support on C8000 with ATI FireGL card. Signed-off-by Thomas Bogendoerfer Signed-off-by: Helge Deller diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h index 3234f49..4651540 100644 --- a/arch/parisc/include/asm/pci.h +++ b/arch/parisc/include/asm/pci.h @@ -225,4 +225,9 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } +#define HAVE_PCI_MMAP + +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); + #endif /* __ASM_PARISC_PCI_H */ diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index 6030905..64f2764 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -220,6 +220,33 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, } +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + unsigned long prot; + + /* + * I/O space can be accessed via normal processor loads and stores on + * this platform but for now we elect not to do this and portable + * drivers should not do this anyway. + */ + if (mmap_state == pci_mmap_io) + return -EINVAL; + + if (write_combine) + return -EINVAL; + + /* + * Ignore write-combine; for now only return uncached mappings. + */ + prot = pgprot_val(vma->vm_page_prot); + prot |= _PAGE_NO_CACHE; + vma->vm_page_prot = __pgprot(prot); + + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + /* * A driver is enabling the device. We make sure that all the appropriate * bits are set to allow the device to operate as the driver is expecting. -- cgit v0.10.2 From d65ea48dc61ffdf6cd7f25b4c319bbd68015e018 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Sun, 2 Jun 2013 12:21:48 -0400 Subject: parisc: Use unshadowed index register for flush instructions in flush_dcache_page_asm and flush_icache_page_asm The comment at the start of pacache.S states that the base and index registers used for fdc,fic, and pdc instructions should not use shadowed registers. Although this is probably unnecessary for tmpalias flushes, there is also no reason not to comply. Signed-off-by: John David Anglin Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 36d7f40..b743a80 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -860,7 +860,7 @@ ENTRY(flush_dcache_page_asm) #endif ldil L%dcache_stride, %r1 - ldw R%dcache_stride(%r1), %r1 + ldw R%dcache_stride(%r1), r31 #ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 @@ -868,26 +868,26 @@ ENTRY(flush_dcache_page_asm) depwi,z 1, 31-PAGE_SHIFT,1, %r25 #endif add %r28, %r25, %r25 - sub %r25, %r1, %r25 - - -1: fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) - fdc,m %r1(%r28) + sub %r25, r31, %r25 + + +1: fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) + fdc,m r31(%r28) cmpb,COND(<<) %r28, %r25,1b - fdc,m %r1(%r28) + fdc,m r31(%r28) sync @@ -936,7 +936,7 @@ ENTRY(flush_icache_page_asm) #endif ldil L%icache_stride, %r1 - ldw R%icache_stride(%r1), %r1 + ldw R%icache_stride(%r1), %r31 #ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 @@ -944,28 +944,28 @@ ENTRY(flush_icache_page_asm) depwi,z 1, 31-PAGE_SHIFT,1, %r25 #endif add %r28, %r25, %r25 - sub %r25, %r1, %r25 + sub %r25, %r31, %r25 /* fic only has the type 26 form on PA1.1, requiring an * explicit space specification, so use %sr4 */ -1: fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) - fic,m %r1(%sr4,%r28) +1: fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) + fic,m %r31(%sr4,%r28) cmpb,COND(<<) %r28, %r25,1b - fic,m %r1(%sr4,%r28) + fic,m %r31(%sr4,%r28) sync -- cgit v0.10.2