From b63d4f0fb80918ab37b6c0ee1adcd49e05c9994c Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 19 Nov 2005 11:10:35 +0000
Subject: [SERIAL] Fix status reporting with PL011 serial driver

The receiver status register reports latched error conditions, which
must be cleared by writing to it.  However, the data register reports
unlatched conditions which are associated with the current character.
Use the data register to interpret error status rather than the RSR.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 938d185..89d7bd3 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -49,7 +49,6 @@
 #include <linux/serial.h>
 
 #include <asm/io.h>
-#include <asm/irq.h>
 #include <asm/sizes.h>
 #include <asm/hardware/amba.h>
 #include <asm/hardware/clock.h>
@@ -63,7 +62,8 @@
 
 #define AMBA_ISR_PASS_LIMIT	256
 
-#define UART_DUMMY_RSR_RX	256
+#define UART_DR_ERROR		(UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
+#define UART_DUMMY_DR_RX	(1 << 16)
 
 /*
  * We wrap our port structure around the generic uart_port.
@@ -116,7 +116,7 @@ pl011_rx_chars(struct uart_amba_port *uap)
 #endif
 {
 	struct tty_struct *tty = uap->port.info->tty;
-	unsigned int status, ch, flag, rsr, max_count = 256;
+	unsigned int status, ch, flag, max_count = 256;
 
 	status = readw(uap->port.membase + UART01x_FR);
 	while ((status & UART01x_FR_RXFE) == 0 && max_count--) {
@@ -129,7 +129,7 @@ pl011_rx_chars(struct uart_amba_port *uap)
 			 */
 		}
 
-		ch = readw(uap->port.membase + UART01x_DR);
+		ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX;
 		flag = TTY_NORMAL;
 		uap->port.icount.rx++;
 
@@ -137,34 +137,33 @@ pl011_rx_chars(struct uart_amba_port *uap)
 		 * Note that the error handling code is
 		 * out of the main execution path
 		 */
-		rsr = readw(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-		if (unlikely(rsr & UART01x_RSR_ANY)) {
-			if (rsr & UART01x_RSR_BE) {
-				rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
+		if (unlikely(ch & UART_DR_ERROR)) {
+			if (ch & UART011_DR_BE) {
+				ch &= ~(UART011_DR_FE | UART011_DR_PE);
 				uap->port.icount.brk++;
 				if (uart_handle_break(&uap->port))
 					goto ignore_char;
-			} else if (rsr & UART01x_RSR_PE)
+			} else if (ch & UART011_DR_PE)
 				uap->port.icount.parity++;
-			else if (rsr & UART01x_RSR_FE)
+			else if (ch & UART011_DR_FE)
 				uap->port.icount.frame++;
-			if (rsr & UART01x_RSR_OE)
+			if (ch & UART011_DR_OE)
 				uap->port.icount.overrun++;
 
-			rsr &= uap->port.read_status_mask;
+			ch &= uap->port.read_status_mask;
 
-			if (rsr & UART01x_RSR_BE)
+			if (ch & UART011_DR_BE)
 				flag = TTY_BREAK;
-			else if (rsr & UART01x_RSR_PE)
+			else if (ch & UART011_DR_PE)
 				flag = TTY_PARITY;
-			else if (rsr & UART01x_RSR_FE)
+			else if (ch & UART011_DR_FE)
 				flag = TTY_FRAME;
 		}
 
 		if (uart_handle_sysrq_char(&uap->port, ch, regs))
 			goto ignore_char;
 
-		uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
+		uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
 
 	ignore_char:
 		status = readw(uap->port.membase + UART01x_FR);
@@ -476,33 +475,33 @@ pl011_set_termios(struct uart_port *port, struct termios *termios,
 	 */
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	port->read_status_mask = UART01x_RSR_OE;
+	port->read_status_mask = UART011_DR_OE | 255;
 	if (termios->c_iflag & INPCK)
-		port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+		port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
 	if (termios->c_iflag & (BRKINT | PARMRK))
-		port->read_status_mask |= UART01x_RSR_BE;
+		port->read_status_mask |= UART011_DR_BE;
 
 	/*
 	 * Characters to ignore
 	 */
 	port->ignore_status_mask = 0;
 	if (termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+		port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE;
 	if (termios->c_iflag & IGNBRK) {
-		port->ignore_status_mask |= UART01x_RSR_BE;
+		port->ignore_status_mask |= UART011_DR_BE;
 		/*
 		 * If we're ignoring parity and break indicators,
 		 * ignore overruns too (for real raw support).
 		 */
 		if (termios->c_iflag & IGNPAR)
-			port->ignore_status_mask |= UART01x_RSR_OE;
+			port->ignore_status_mask |= UART011_DR_OE;
 	}
 
 	/*
 	 * Ignore all characters if CREAD is not set.
 	 */
 	if ((termios->c_cflag & CREAD) == 0)
-		port->ignore_status_mask |= UART_DUMMY_RSR_RX;
+		port->ignore_status_mask |= UART_DUMMY_DR_RX;
 
 	if (UART_ENABLE_MS(port, termios->c_cflag))
 		pl011_enable_ms(port);
diff --git a/include/asm-arm/hardware/amba_serial.h b/include/asm-arm/hardware/amba_serial.h
index 71770aa..dc726ff 100644
--- a/include/asm-arm/hardware/amba_serial.h
+++ b/include/asm-arm/hardware/amba_serial.h
@@ -50,6 +50,11 @@
 #define UART011_ICR		0x44	/* Interrupt clear register. */
 #define UART011_DMACR		0x48	/* DMA control register. */
 
+#define UART011_DR_OE		(1 << 11)
+#define UART011_DR_BE		(1 << 10)
+#define UART011_DR_PE		(1 << 9)
+#define UART011_DR_FE		(1 << 8)
+
 #define UART01x_RSR_OE 		0x08
 #define UART01x_RSR_BE 		0x04
 #define UART01x_RSR_PE 		0x02
-- 
cgit v0.10.2