From 7c367d3da697846b80058859937f606c0081beda Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:07 +0200 Subject: pinctrl: samsung: Detect and handle unsupported configuration types This patch modifies the pinctrl-samsung driver to detect when width of a bit field is set to zero (which means that such configuraton type is not supported) and return an error instead of trying to modify an inexistent register. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index dd108a9..c660fa5 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -391,6 +391,9 @@ static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin, return -EINVAL; } + if (!width) + return -EINVAL; + mask = (1 << width) - 1; shift = pin_offset * width; data = readl(reg_base + cfg_reg); -- cgit v0.10.2 From 62f14c0ef5d1bbd640b42a59f8f084f764a067c4 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:08 +0200 Subject: pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank The pointer to gpio_chip passed to pin_to_reg_bank utility function is used only to retrieve a pointer to samsung_pinctrl_drv_data structure. This patch modifies the function and its users to pass a pointer to samsung_pinctrl_drv_data directly. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index c660fa5..aa42d54 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -250,14 +250,12 @@ static int samsung_pinmux_get_groups(struct pinctrl_dev *pctldev, * given a pin number that is local to a pin controller, find out the pin bank * and the register base of the pin bank. */ -static void pin_to_reg_bank(struct gpio_chip *gc, unsigned pin, - void __iomem **reg, u32 *offset, +static void pin_to_reg_bank(struct samsung_pinctrl_drv_data *drvdata, + unsigned pin, void __iomem **reg, u32 *offset, struct samsung_pin_bank **bank) { - struct samsung_pinctrl_drv_data *drvdata; struct samsung_pin_bank *b; - drvdata = dev_get_drvdata(gc->dev); b = drvdata->ctrl->pin_banks; while ((pin >= b->pin_base) && @@ -292,7 +290,7 @@ static void samsung_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector, * pin function number in the config register. */ for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++) { - pin_to_reg_bank(drvdata->gc, pins[cnt] - drvdata->ctrl->base, + pin_to_reg_bank(drvdata, pins[cnt] - drvdata->ctrl->base, ®, &pin_offset, &bank); mask = (1 << bank->func_width) - 1; shift = pin_offset * bank->func_width; @@ -329,10 +327,13 @@ static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range, unsigned offset, bool input) { struct samsung_pin_bank *bank; + struct samsung_pinctrl_drv_data *drvdata; void __iomem *reg; u32 data, pin_offset, mask, shift; - pin_to_reg_bank(range->gc, offset, ®, &pin_offset, &bank); + drvdata = pinctrl_dev_get_drvdata(pctldev); + + pin_to_reg_bank(drvdata, offset, ®, &pin_offset, &bank); mask = (1 << bank->func_width) - 1; shift = pin_offset * bank->func_width; @@ -366,7 +367,7 @@ static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin, u32 cfg_value, cfg_reg; drvdata = pinctrl_dev_get_drvdata(pctldev); - pin_to_reg_bank(drvdata->gc, pin - drvdata->ctrl->base, ®_base, + pin_to_reg_bank(drvdata, pin - drvdata->ctrl->base, ®_base, &pin_offset, &bank); switch (cfg_type) { @@ -468,8 +469,11 @@ static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value) { void __iomem *reg; u32 pin_offset, data; + struct samsung_pinctrl_drv_data *drvdata; - pin_to_reg_bank(gc, offset, ®, &pin_offset, NULL); + drvdata = dev_get_drvdata(gc->dev); + + pin_to_reg_bank(drvdata, offset, ®, &pin_offset, NULL); data = readl(reg + DAT_REG); data &= ~(1 << pin_offset); if (value) @@ -482,8 +486,11 @@ static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset) { void __iomem *reg; u32 pin_offset, data; + struct samsung_pinctrl_drv_data *drvdata; + + drvdata = dev_get_drvdata(gc->dev); - pin_to_reg_bank(gc, offset, ®, &pin_offset, NULL); + pin_to_reg_bank(drvdata, offset, ®, &pin_offset, NULL); data = readl(reg + DAT_REG); data >>= pin_offset; data &= 1; -- cgit v0.10.2 From 40ba6227aeb3712b0cea0c4f9c3e355cf801f4c4 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:09 +0200 Subject: pinctrl: samsung: Assing pin numbers dynamically This patch modifies the pinctrl-samsung driver to assign numbers to pins dynamically instead of static enumerations. Thanks to this change the amount of code requried to support a SoC can be greatly reduced and the code made more readable. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 21362f4..0ea2164 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -484,51 +484,51 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) /* pin banks of exynos4210 pin-controller 0 */ static struct samsung_pin_bank exynos4210_pin_banks0[] = { - EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_A0, "gpa0"), - EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_A1, "gpa1"), - EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_B, "gpb"), - EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_C0, "gpc0"), - EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_C1, "gpc1"), - EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_D0, "gpd0"), - EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_D1, "gpd1"), - EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_E0, "gpe0"), - EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_E1, "gpe1"), - EXYNOS_PIN_BANK_EINTG(0x120, EXYNOS4210_GPIO_E2, "gpe2"), - EXYNOS_PIN_BANK_EINTG(0x140, EXYNOS4210_GPIO_E3, "gpe3"), - EXYNOS_PIN_BANK_EINTG(0x160, EXYNOS4210_GPIO_E4, "gpe4"), - EXYNOS_PIN_BANK_EINTG(0x180, EXYNOS4210_GPIO_F0, "gpf0"), - EXYNOS_PIN_BANK_EINTG(0x1A0, EXYNOS4210_GPIO_F1, "gpf1"), - EXYNOS_PIN_BANK_EINTG(0x1C0, EXYNOS4210_GPIO_F2, "gpf2"), - EXYNOS_PIN_BANK_EINTG(0x1E0, EXYNOS4210_GPIO_F3, "gpf3"), + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0"), + EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1"), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb"), + EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0"), + EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1"), + EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0"), + EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1"), + EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0"), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1"), + EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2"), + EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3"), + EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4"), + EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0"), + EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1"), + EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2"), + EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3"), }; /* pin banks of exynos4210 pin-controller 1 */ static struct samsung_pin_bank exynos4210_pin_banks1[] = { - EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_J0, "gpj0"), - EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_J1, "gpj1"), - EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_K0, "gpk0"), - EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_K1, "gpk1"), - EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_K2, "gpk2"), - EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_K3, "gpk3"), - EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_L0, "gpl0"), - EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_L1, "gpl1"), - EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_L2, "gpl2"), - EXYNOS_PIN_BANK_EINTN(0x120, EXYNOS4210_GPIO_Y0, "gpy0"), - EXYNOS_PIN_BANK_EINTN(0x140, EXYNOS4210_GPIO_Y1, "gpy1"), - EXYNOS_PIN_BANK_EINTN(0x160, EXYNOS4210_GPIO_Y2, "gpy2"), - EXYNOS_PIN_BANK_EINTN(0x180, EXYNOS4210_GPIO_Y3, "gpy3"), - EXYNOS_PIN_BANK_EINTN(0x1A0, EXYNOS4210_GPIO_Y4, "gpy4"), - EXYNOS_PIN_BANK_EINTN(0x1C0, EXYNOS4210_GPIO_Y5, "gpy5"), - EXYNOS_PIN_BANK_EINTN(0x1E0, EXYNOS4210_GPIO_Y6, "gpy6"), - EXYNOS_PIN_BANK_EINTN(0xC00, EXYNOS4210_GPIO_X0, "gpx0"), - EXYNOS_PIN_BANK_EINTN(0xC20, EXYNOS4210_GPIO_X1, "gpx1"), - EXYNOS_PIN_BANK_EINTN(0xC40, EXYNOS4210_GPIO_X2, "gpx2"), - EXYNOS_PIN_BANK_EINTN(0xC60, EXYNOS4210_GPIO_X3, "gpx3"), + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0"), + EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1"), + EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0"), + EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1"), + EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2"), + EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3"), + EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0"), + EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1"), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2"), + EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"), + EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"), + EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"), + EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"), + EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"), + EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"), + EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"), + EXYNOS_PIN_BANK_EINTN(8, 0xC00, "gpx0"), + EXYNOS_PIN_BANK_EINTN(8, 0xC20, "gpx1"), + EXYNOS_PIN_BANK_EINTN(8, 0xC40, "gpx2"), + EXYNOS_PIN_BANK_EINTN(8, 0xC60, "gpx3"), }; /* pin banks of exynos4210 pin-controller 2 */ static struct samsung_pin_bank exynos4210_pin_banks2[] = { - EXYNOS_PIN_BANK_EINTN(0x000, EXYNOS4210_GPIO_Z, "gpz"), + EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"), }; /* @@ -540,9 +540,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 0 data */ .pin_banks = exynos4210_pin_banks0, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks0), - .base = EXYNOS4210_GPIO_A0_START, - .nr_pins = EXYNOS4210_GPIOA_NR_PINS, - .nr_gint = EXYNOS4210_GPIOA_NR_GINT, .geint_con = EXYNOS_GPIO_ECON_OFFSET, .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, @@ -553,9 +550,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 1 data */ .pin_banks = exynos4210_pin_banks1, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks1), - .base = EXYNOS4210_GPIOA_NR_PINS, - .nr_pins = EXYNOS4210_GPIOB_NR_PINS, - .nr_gint = EXYNOS4210_GPIOB_NR_GINT, .nr_wint = 32, .geint_con = EXYNOS_GPIO_ECON_OFFSET, .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, @@ -571,9 +565,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 2 data */ .pin_banks = exynos4210_pin_banks2, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks2), - .base = EXYNOS4210_GPIOA_NR_PINS + - EXYNOS4210_GPIOB_NR_PINS, - .nr_pins = EXYNOS4210_GPIOC_NR_PINS, .label = "exynos4210-gpio-ctrl2", }, }; diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 31d0a06..1788467 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -165,11 +165,10 @@ enum exynos4210_gpio_xc_start { #define EXYNOS_EINT_MAX_PER_BANK 8 #define EXYNOS_EINT_NR_WKUP_EINT -#define EXYNOS_PIN_BANK_EINTN(reg, __gpio, id) \ +#define EXYNOS_PIN_BANK_EINTN(pins, reg, id) \ { \ .pctl_offset = reg, \ - .pin_base = (__gpio##_START), \ - .nr_pins = (__gpio##_NR), \ + .nr_pins = pins, \ .func_width = 4, \ .pud_width = 2, \ .drv_width = 2, \ @@ -179,18 +178,16 @@ enum exynos4210_gpio_xc_start { .name = id \ } -#define EXYNOS_PIN_BANK_EINTG(reg, __gpio, id) \ +#define EXYNOS_PIN_BANK_EINTG(pins, reg, id) \ { \ .pctl_offset = reg, \ - .pin_base = (__gpio##_START), \ - .nr_pins = (__gpio##_NR), \ + .nr_pins = pins, \ .func_width = 4, \ .pud_width = 2, \ .drv_width = 2, \ .conpdn_width = 2, \ .pudpdn_width = 2, \ .eint_type = EINT_TYPE_GPIO, \ - .irq_base = (__gpio##_IRQ), \ .name = id \ } diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index aa42d54..f219bb6 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -46,6 +46,8 @@ struct pin_config { { "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN }, }; +static unsigned int pin_base = 0; + /* check if the selector is a valid pin group selector */ static int samsung_get_group_count(struct pinctrl_dev *pctldev) { @@ -792,6 +794,9 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( int id; const struct of_device_id *match; const struct device_node *node = pdev->dev.of_node; + struct samsung_pin_ctrl *ctrl; + struct samsung_pin_bank *bank; + int i; id = of_alias_get_id(pdev->dev.of_node, "pinctrl"); if (id < 0) { @@ -799,7 +804,22 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( return NULL; } match = of_match_node(samsung_pinctrl_dt_match, node); - return (struct samsung_pin_ctrl *)match->data + id; + ctrl = (struct samsung_pin_ctrl *)match->data + id; + + bank = ctrl->pin_banks; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + bank->pin_base = ctrl->nr_pins; + ctrl->nr_pins += bank->nr_pins; + if (bank->eint_type == EINT_TYPE_GPIO) { + bank->irq_base = ctrl->nr_gint; + ctrl->nr_gint += bank->nr_pins; + } + } + + ctrl->base = pin_base; + pin_base += ctrl->nr_pins; + + return ctrl; } static int __devinit samsung_pinctrl_probe(struct platform_device *pdev) -- cgit v0.10.2 From 3a232ba86f3a93217ac717306645c5c555429858 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:10 +0200 Subject: pinctrl: samsung: Remove static pin enumerations Since pin numbers are now assigned dynamically, those are not needed anymore. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 1788467..2de4a29 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -17,125 +17,6 @@ * (at your option) any later version. */ -#define EXYNOS_GPIO_START(__gpio) ((__gpio##_START) + (__gpio##_NR)) - -#define EXYNOS4210_GPIO_A0_NR (8) -#define EXYNOS4210_GPIO_A1_NR (6) -#define EXYNOS4210_GPIO_B_NR (8) -#define EXYNOS4210_GPIO_C0_NR (5) -#define EXYNOS4210_GPIO_C1_NR (5) -#define EXYNOS4210_GPIO_D0_NR (4) -#define EXYNOS4210_GPIO_D1_NR (4) -#define EXYNOS4210_GPIO_E0_NR (5) -#define EXYNOS4210_GPIO_E1_NR (8) -#define EXYNOS4210_GPIO_E2_NR (6) -#define EXYNOS4210_GPIO_E3_NR (8) -#define EXYNOS4210_GPIO_E4_NR (8) -#define EXYNOS4210_GPIO_F0_NR (8) -#define EXYNOS4210_GPIO_F1_NR (8) -#define EXYNOS4210_GPIO_F2_NR (8) -#define EXYNOS4210_GPIO_F3_NR (6) -#define EXYNOS4210_GPIO_J0_NR (8) -#define EXYNOS4210_GPIO_J1_NR (5) -#define EXYNOS4210_GPIO_K0_NR (7) -#define EXYNOS4210_GPIO_K1_NR (7) -#define EXYNOS4210_GPIO_K2_NR (7) -#define EXYNOS4210_GPIO_K3_NR (7) -#define EXYNOS4210_GPIO_L0_NR (8) -#define EXYNOS4210_GPIO_L1_NR (3) -#define EXYNOS4210_GPIO_L2_NR (8) -#define EXYNOS4210_GPIO_Y0_NR (6) -#define EXYNOS4210_GPIO_Y1_NR (4) -#define EXYNOS4210_GPIO_Y2_NR (6) -#define EXYNOS4210_GPIO_Y3_NR (8) -#define EXYNOS4210_GPIO_Y4_NR (8) -#define EXYNOS4210_GPIO_Y5_NR (8) -#define EXYNOS4210_GPIO_Y6_NR (8) -#define EXYNOS4210_GPIO_X0_NR (8) -#define EXYNOS4210_GPIO_X1_NR (8) -#define EXYNOS4210_GPIO_X2_NR (8) -#define EXYNOS4210_GPIO_X3_NR (8) -#define EXYNOS4210_GPIO_Z_NR (7) - -enum exynos4210_gpio_xa_start { - EXYNOS4210_GPIO_A0_START = 0, - EXYNOS4210_GPIO_A1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A0), - EXYNOS4210_GPIO_B_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A1), - EXYNOS4210_GPIO_C0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_B), - EXYNOS4210_GPIO_C1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C0), - EXYNOS4210_GPIO_D0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C1), - EXYNOS4210_GPIO_D1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D0), - EXYNOS4210_GPIO_E0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D1), - EXYNOS4210_GPIO_E1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E0), - EXYNOS4210_GPIO_E2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E1), - EXYNOS4210_GPIO_E3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E2), - EXYNOS4210_GPIO_E4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E3), - EXYNOS4210_GPIO_F0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E4), - EXYNOS4210_GPIO_F1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F0), - EXYNOS4210_GPIO_F2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F1), - EXYNOS4210_GPIO_F3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F2), -}; - -enum exynos4210_gpio_xb_start { - EXYNOS4210_GPIO_J0_START = 0, - EXYNOS4210_GPIO_J1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J0), - EXYNOS4210_GPIO_K0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J1), - EXYNOS4210_GPIO_K1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K0), - EXYNOS4210_GPIO_K2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K1), - EXYNOS4210_GPIO_K3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K2), - EXYNOS4210_GPIO_L0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K3), - EXYNOS4210_GPIO_L1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L0), - EXYNOS4210_GPIO_L2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L1), - EXYNOS4210_GPIO_Y0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2), - EXYNOS4210_GPIO_Y1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y0), - EXYNOS4210_GPIO_Y2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y1), - EXYNOS4210_GPIO_Y3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y2), - EXYNOS4210_GPIO_Y4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y3), - EXYNOS4210_GPIO_Y5_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y4), - EXYNOS4210_GPIO_Y6_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y5), - EXYNOS4210_GPIO_X0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y6), - EXYNOS4210_GPIO_X1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X0), - EXYNOS4210_GPIO_X2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X1), - EXYNOS4210_GPIO_X3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X2), -}; - -enum exynos4210_gpio_xc_start { - EXYNOS4210_GPIO_Z_START = 0, -}; - -#define EXYNOS4210_GPIO_A0_IRQ EXYNOS4210_GPIO_A0_START -#define EXYNOS4210_GPIO_A1_IRQ EXYNOS4210_GPIO_A1_START -#define EXYNOS4210_GPIO_B_IRQ EXYNOS4210_GPIO_B_START -#define EXYNOS4210_GPIO_C0_IRQ EXYNOS4210_GPIO_C0_START -#define EXYNOS4210_GPIO_C1_IRQ EXYNOS4210_GPIO_C1_START -#define EXYNOS4210_GPIO_D0_IRQ EXYNOS4210_GPIO_D0_START -#define EXYNOS4210_GPIO_D1_IRQ EXYNOS4210_GPIO_D1_START -#define EXYNOS4210_GPIO_E0_IRQ EXYNOS4210_GPIO_E0_START -#define EXYNOS4210_GPIO_E1_IRQ EXYNOS4210_GPIO_E1_START -#define EXYNOS4210_GPIO_E2_IRQ EXYNOS4210_GPIO_E2_START -#define EXYNOS4210_GPIO_E3_IRQ EXYNOS4210_GPIO_E3_START -#define EXYNOS4210_GPIO_E4_IRQ EXYNOS4210_GPIO_E4_START -#define EXYNOS4210_GPIO_F0_IRQ EXYNOS4210_GPIO_F0_START -#define EXYNOS4210_GPIO_F1_IRQ EXYNOS4210_GPIO_F1_START -#define EXYNOS4210_GPIO_F2_IRQ EXYNOS4210_GPIO_F2_START -#define EXYNOS4210_GPIO_F3_IRQ EXYNOS4210_GPIO_F3_START -#define EXYNOS4210_GPIO_J0_IRQ EXYNOS4210_GPIO_J0_START -#define EXYNOS4210_GPIO_J1_IRQ EXYNOS4210_GPIO_J1_START -#define EXYNOS4210_GPIO_K0_IRQ EXYNOS4210_GPIO_K0_START -#define EXYNOS4210_GPIO_K1_IRQ EXYNOS4210_GPIO_K1_START -#define EXYNOS4210_GPIO_K2_IRQ EXYNOS4210_GPIO_K2_START -#define EXYNOS4210_GPIO_K3_IRQ EXYNOS4210_GPIO_K3_START -#define EXYNOS4210_GPIO_L0_IRQ EXYNOS4210_GPIO_L0_START -#define EXYNOS4210_GPIO_L1_IRQ EXYNOS4210_GPIO_L1_START -#define EXYNOS4210_GPIO_L2_IRQ EXYNOS4210_GPIO_L2_START -#define EXYNOS4210_GPIO_Z_IRQ EXYNOS4210_GPIO_Z_START - -#define EXYNOS4210_GPIOA_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3) -#define EXYNOS4210_GPIOA_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3) -#define EXYNOS4210_GPIOB_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_X3) -#define EXYNOS4210_GPIOB_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2) -#define EXYNOS4210_GPIOC_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_Z) - /* External GPIO and wakeup interrupt related definitions */ #define EXYNOS_GPIO_ECON_OFFSET 0x700 #define EXYNOS_GPIO_EMASK_OFFSET 0x900 -- cgit v0.10.2 From 724e56a48c05dacc63ceb535571eec2ad6949368 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:11 +0200 Subject: pinctrl: samsung: Distinguish between pin group and bank nodes This patch modifies the loop iterating over all child nodes and parsing pin groups to check whether the node is really a pin group node by checking for existence of samsung,pins property. This is a prerequisite for further patches adding additional subnodes to the pinctrl node, required for per bank GPIO and interrupt specifiers. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index f219bb6..94e1378 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -609,7 +609,7 @@ static int __init samsung_pinctrl_parse_dt(struct platform_device *pdev, */ for_each_child_of_node(dev_np, cfg_np) { u32 function; - if (of_find_property(cfg_np, "interrupt-controller", NULL)) + if (!of_find_property(cfg_np, "samsung,pins", NULL)) continue; ret = samsung_pinctrl_parse_dt_pins(pdev, cfg_np, -- cgit v0.10.2 From a7a8241540c3168965588d313f46b14f79e86753 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:12 +0200 Subject: ARM: dts: exynos4210-pinctrl: Add nodes for pin banks This patch is a preparation for converting the pinctrl-samsung driver to one GPIO chip and IRQ domain per bank. It allows particular banks to be specified using their phandles. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index b12cf27..f207d8d 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -16,6 +16,134 @@ / { pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe2: gpe2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe3: gpe3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe4: gpe4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + uart0_data: uart0-data { samsung,pins = "gpa0-0", "gpa0-1"; samsung,pin-function = <0x2>; @@ -205,6 +333,145 @@ }; pinctrl@11000000 { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + sd0_clk: sd0-clk { samsung,pins = "gpk0-0"; samsung,pin-function = <2>; @@ -438,6 +705,11 @@ }; pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + }; + i2s0_bus: i2s0-bus { samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", "gpz-4", "gpz-5", "gpz-6"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 214c557..b768e9f 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -74,233 +74,4 @@ compatible = "samsung,pinctrl-exynos4210"; reg = <0x03860000 0x1000>; }; - - gpio-controllers { - #address-cells = <1>; - #size-cells = <1>; - gpio-controller; - ranges; - - gpa0: gpio-controller@11400000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400000 0x20>; - #gpio-cells = <4>; - }; - - gpa1: gpio-controller@11400020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400020 0x20>; - #gpio-cells = <4>; - }; - - gpb: gpio-controller@11400040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400040 0x20>; - #gpio-cells = <4>; - }; - - gpc0: gpio-controller@11400060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400060 0x20>; - #gpio-cells = <4>; - }; - - gpc1: gpio-controller@11400080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400080 0x20>; - #gpio-cells = <4>; - }; - - gpd0: gpio-controller@114000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000A0 0x20>; - #gpio-cells = <4>; - }; - - gpd1: gpio-controller@114000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000C0 0x20>; - #gpio-cells = <4>; - }; - - gpe0: gpio-controller@114000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000E0 0x20>; - #gpio-cells = <4>; - }; - - gpe1: gpio-controller@11400100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400100 0x20>; - #gpio-cells = <4>; - }; - - gpe2: gpio-controller@11400120 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400120 0x20>; - #gpio-cells = <4>; - }; - - gpe3: gpio-controller@11400140 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400140 0x20>; - #gpio-cells = <4>; - }; - - gpe4: gpio-controller@11400160 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400160 0x20>; - #gpio-cells = <4>; - }; - - gpf0: gpio-controller@11400180 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400180 0x20>; - #gpio-cells = <4>; - }; - - gpf1: gpio-controller@114001A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001A0 0x20>; - #gpio-cells = <4>; - }; - - gpf2: gpio-controller@114001C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001C0 0x20>; - #gpio-cells = <4>; - }; - - gpf3: gpio-controller@114001E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001E0 0x20>; - #gpio-cells = <4>; - }; - - gpj0: gpio-controller@11000000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000000 0x20>; - #gpio-cells = <4>; - }; - - gpj1: gpio-controller@11000020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000020 0x20>; - #gpio-cells = <4>; - }; - - gpk0: gpio-controller@11000040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000040 0x20>; - #gpio-cells = <4>; - }; - - gpk1: gpio-controller@11000060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000060 0x20>; - #gpio-cells = <4>; - }; - - gpk2: gpio-controller@11000080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000080 0x20>; - #gpio-cells = <4>; - }; - - gpk3: gpio-controller@110000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000A0 0x20>; - #gpio-cells = <4>; - }; - - gpl0: gpio-controller@110000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000C0 0x20>; - #gpio-cells = <4>; - }; - - gpl1: gpio-controller@110000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000E0 0x20>; - #gpio-cells = <4>; - }; - - gpl2: gpio-controller@11000100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000100 0x20>; - #gpio-cells = <4>; - }; - - gpy0: gpio-controller@11000120 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000120 0x20>; - #gpio-cells = <4>; - }; - - gpy1: gpio-controller@11000140 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000140 0x20>; - #gpio-cells = <4>; - }; - - gpy2: gpio-controller@11000160 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000160 0x20>; - #gpio-cells = <4>; - }; - - gpy3: gpio-controller@11000180 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000180 0x20>; - #gpio-cells = <4>; - }; - - gpy4: gpio-controller@110001A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001A0 0x20>; - #gpio-cells = <4>; - }; - - gpy5: gpio-controller@110001C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001C0 0x20>; - #gpio-cells = <4>; - }; - - gpy6: gpio-controller@110001E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001E0 0x20>; - #gpio-cells = <4>; - }; - - gpx0: gpio-controller@11000C00 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C00 0x20>; - #gpio-cells = <4>; - }; - - gpx1: gpio-controller@11000C20 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C20 0x20>; - #gpio-cells = <4>; - }; - - gpx2: gpio-controller@11000C40 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C40 0x20>; - #gpio-cells = <4>; - }; - - gpx3: gpio-controller@11000C60 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C60 0x20>; - #gpio-cells = <4>; - }; - - gpz: gpio-controller@03860000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x03860000 0x20>; - #gpio-cells = <4>; - }; - }; }; -- cgit v0.10.2 From ab663789d69760d2735402f66501f20b60312a3d Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:13 +0200 Subject: pinctrl: samsung: Match pin banks with their device nodes This patch is a preparation for converting the pinctrl-samsung driver to one GPIO chip and IRQ domain per bank. It binds banks defined by internal driver data with bank nodes in device tree. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 94e1378..f266710 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -794,6 +794,7 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( int id; const struct of_device_id *match; const struct device_node *node = pdev->dev.of_node; + struct device_node *np; struct samsung_pin_ctrl *ctrl; struct samsung_pin_bank *bank; int i; @@ -816,6 +817,18 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( } } + for_each_child_of_node(node, np) { + if (!of_find_property(np, "gpio-controller", NULL)) + continue; + bank = ctrl->pin_banks; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + if (!strcmp(bank->name, np->name)) { + bank->of_node = np; + break; + } + } + } + ctrl->base = pin_base; pin_base += ctrl->nr_pins; diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index b895693..5c53f32 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -111,6 +111,7 @@ struct samsung_pinctrl_drv_data; * @eint_type: type of the external interrupt supported by the bank. * @irq_base: starting controller local irq number of the bank. * @name: name to be prefixed for each pin in this pin bank. + * @of_node: OF node of the bank. */ struct samsung_pin_bank { u32 pctl_offset; @@ -124,6 +125,7 @@ struct samsung_pin_bank { enum eint_type eint_type; u32 irq_base; char *name; + struct device_node *of_node; }; /** -- cgit v0.10.2 From 6defe9a0ddc59aa2302473aa3c8b3fdb543fdc1b Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:14 +0200 Subject: pinctrl: samsung: Hold pointer to driver data in bank struct This patch is a preparation for converting the pinctrl-samsung driver to one GPIO chip and IRQ domain per bank. It allows one having only a pointer to particular bank struct to access driver data struct. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index f266710..53493c3 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -789,17 +789,18 @@ static const struct of_device_id samsung_pinctrl_dt_match[]; /* retrieve the soc specific data */ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( + struct samsung_pinctrl_drv_data *d, struct platform_device *pdev) { int id; const struct of_device_id *match; - const struct device_node *node = pdev->dev.of_node; + struct device_node *node = pdev->dev.of_node; struct device_node *np; struct samsung_pin_ctrl *ctrl; struct samsung_pin_bank *bank; int i; - id = of_alias_get_id(pdev->dev.of_node, "pinctrl"); + id = of_alias_get_id(node, "pinctrl"); if (id < 0) { dev_err(&pdev->dev, "failed to get alias id\n"); return NULL; @@ -809,6 +810,7 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( bank = ctrl->pin_banks; for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + bank->drvdata = d; bank->pin_base = ctrl->nr_pins; ctrl->nr_pins += bank->nr_pins; if (bank->eint_type == EINT_TYPE_GPIO) { @@ -848,18 +850,18 @@ static int __devinit samsung_pinctrl_probe(struct platform_device *pdev) return -ENODEV; } - ctrl = samsung_pinctrl_get_soc_data(pdev); - if (!ctrl) { - dev_err(&pdev->dev, "driver data not available\n"); - return -EINVAL; - } - drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); if (!drvdata) { dev_err(dev, "failed to allocate memory for driver's " "private data\n"); return -ENOMEM; } + + ctrl = samsung_pinctrl_get_soc_data(drvdata, pdev); + if (!ctrl) { + dev_err(&pdev->dev, "driver data not available\n"); + return -EINVAL; + } drvdata->ctrl = ctrl; drvdata->dev = dev; diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index 5c53f32..ea5dadd 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -112,6 +112,7 @@ struct samsung_pinctrl_drv_data; * @irq_base: starting controller local irq number of the bank. * @name: name to be prefixed for each pin in this pin bank. * @of_node: OF node of the bank. + * @drvdata: link to controller driver data */ struct samsung_pin_bank { u32 pctl_offset; @@ -126,6 +127,7 @@ struct samsung_pin_bank { u32 irq_base; char *name; struct device_node *of_node; + struct samsung_pinctrl_drv_data *drvdata; }; /** -- cgit v0.10.2 From 1b6056d6db2426cd612f03dabacf655ecb6a27ae Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:15 +0200 Subject: pinctrl: samsung: Include bank-specific eint offset in bank struct Some SoCs, like Exynos4x12, have non-sequential layout of EINT control registers and so current way of calculating register addresses does not work correctly for them. This patch adds eint_offset field to samsung_pin_bank struct and modifies the driver to use it instead of calculating the offsets from bank index. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 0ea2164..bd9f130 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -146,7 +146,7 @@ static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw, struct samsung_pin_bank *bank = d->ctrl->pin_banks; struct exynos_geint_data *eint_data; unsigned int nr_banks = d->ctrl->nr_banks, idx; - unsigned int irq_base = 0, eint_offset = 0; + unsigned int irq_base = 0; if (hw >= d->ctrl->nr_gint) { dev_err(d->dev, "unsupported ext-gpio interrupt\n"); @@ -159,7 +159,6 @@ static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw, if ((hw >= irq_base) && (hw < (irq_base + bank->nr_pins))) break; irq_base += bank->nr_pins; - eint_offset += 4; } if (idx == nr_banks) { @@ -175,7 +174,7 @@ static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw, eint_data->bank = bank; eint_data->pin = hw - irq_base; - eint_data->eint_offset = eint_offset; + eint_data->eint_offset = bank->eint_offset; return eint_data; } @@ -484,35 +483,35 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) /* pin banks of exynos4210 pin-controller 0 */ static struct samsung_pin_bank exynos4210_pin_banks0[] = { - EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0"), - EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1"), - EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb"), - EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0"), - EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1"), - EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0"), - EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1"), - EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0"), - EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1"), - EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2"), - EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3"), - EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4"), - EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0"), - EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1"), - EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2"), - EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3"), + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), + EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), + EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c), + EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10), + EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14), + EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18), + EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0", 0x1c), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1", 0x20), + EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2", 0x24), + EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3", 0x28), + EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4", 0x2c), + EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30), + EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34), + EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38), + EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c), }; /* pin banks of exynos4210 pin-controller 1 */ static struct samsung_pin_bank exynos4210_pin_banks1[] = { - EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0"), - EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1"), - EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0"), - EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1"), - EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2"), - EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3"), - EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0"), - EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1"), - EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2"), + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0", 0x00), + EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1", 0x04), + EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08), + EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c), + EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10), + EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14), + EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0", 0x18), + EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1", 0x1c), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20), EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"), EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"), EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"), diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 2de4a29..5d8e380 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -59,7 +59,7 @@ .name = id \ } -#define EXYNOS_PIN_BANK_EINTG(pins, reg, id) \ +#define EXYNOS_PIN_BANK_EINTG(pins, reg, id, offs) \ { \ .pctl_offset = reg, \ .nr_pins = pins, \ @@ -69,6 +69,7 @@ .conpdn_width = 2, \ .pudpdn_width = 2, \ .eint_type = EINT_TYPE_GPIO, \ + .eint_offset = offs, \ .name = id \ } diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index ea5dadd..d77d9bc 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -124,6 +124,7 @@ struct samsung_pin_bank { u8 conpdn_width; u8 pudpdn_width; enum eint_type eint_type; + u32 eint_offset; u32 irq_base; char *name; struct device_node *of_node; -- cgit v0.10.2 From 595be7268a85735d229451821b56f122d09d7bdc Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:16 +0200 Subject: pinctrl: exynos: Use one IRQ domain per pin bank Instead of registering one IRQ domain for all pin banks of a pin controller, this patch implements registration of per-bank domains. At a cost of a little memory overhead (~2.5KiB for all GPIO interrupts of Exynos4x12) it simplifies driver code and device tree sources, because GPIO interrupts can be now specified per banks. Example: device { /* ... */ interrupt-parent = <&gpa1>; interrupts = <3 0>; /* ... */ }; Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index b768e9f..c27aea7 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -46,16 +46,12 @@ compatible = "samsung,pinctrl-exynos4210"; reg = <0x11400000 0x1000>; interrupts = <0 47 0>; - interrupt-controller; - #interrupt-cells = <2>; }; pinctrl_1: pinctrl@11000000 { compatible = "samsung,pinctrl-exynos4210"; reg = <0x11000000 0x1000>; interrupts = <0 46 0>; - interrupt-controller; - #interrupt-cells = <2>; wakup_eint: wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index bd9f130..be757b1 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -40,46 +40,46 @@ static const struct of_device_id exynos_wkup_irq_ids[] = { static void exynos_gpio_irq_unmask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask &= ~(1 << edata->pin); + mask &= ~(1 << irqd->hwirq); writel(mask, d->virt_base + reg_mask); } static void exynos_gpio_irq_mask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask |= 1 << edata->pin; + mask |= 1 << irqd->hwirq; writel(mask, d->virt_base + reg_mask); } static void exynos_gpio_irq_ack(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - unsigned long reg_pend = d->ctrl->geint_pend + edata->eint_offset; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long reg_pend = d->ctrl->geint_pend + bank->eint_offset; - writel(1 << edata->pin, d->virt_base + reg_pend); + writel(1 << irqd->hwirq, d->virt_base + reg_pend); } static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; struct samsung_pin_ctrl *ctrl = d->ctrl; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - struct samsung_pin_bank *bank = edata->bank; - unsigned int shift = EXYNOS_EINT_CON_LEN * edata->pin; + unsigned int pin = irqd->hwirq; + unsigned int shift = EXYNOS_EINT_CON_LEN * pin; unsigned int con, trig_type; - unsigned long reg_con = ctrl->geint_con + edata->eint_offset; + unsigned long reg_con = ctrl->geint_con + bank->eint_offset; unsigned int mask; switch (type) { @@ -114,7 +114,7 @@ static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) writel(con, d->virt_base + reg_con); reg_con = bank->pctl_offset; - shift = edata->pin * bank->func_width; + shift = pin * bank->func_width; mask = (1 << bank->func_width) - 1; con = readl(d->virt_base + reg_con); @@ -136,81 +136,23 @@ static struct irq_chip exynos_gpio_irq_chip = { .irq_set_type = exynos_gpio_irq_set_type, }; -/* - * given a controller-local external gpio interrupt number, prepare the handler - * data for it. - */ -static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw, - struct samsung_pinctrl_drv_data *d) -{ - struct samsung_pin_bank *bank = d->ctrl->pin_banks; - struct exynos_geint_data *eint_data; - unsigned int nr_banks = d->ctrl->nr_banks, idx; - unsigned int irq_base = 0; - - if (hw >= d->ctrl->nr_gint) { - dev_err(d->dev, "unsupported ext-gpio interrupt\n"); - return NULL; - } - - for (idx = 0; idx < nr_banks; idx++, bank++) { - if (bank->eint_type != EINT_TYPE_GPIO) - continue; - if ((hw >= irq_base) && (hw < (irq_base + bank->nr_pins))) - break; - irq_base += bank->nr_pins; - } - - if (idx == nr_banks) { - dev_err(d->dev, "pin bank not found for ext-gpio interrupt\n"); - return NULL; - } - - eint_data = devm_kzalloc(d->dev, sizeof(*eint_data), GFP_KERNEL); - if (!eint_data) { - dev_err(d->dev, "no memory for eint-gpio data\n"); - return NULL; - } - - eint_data->bank = bank; - eint_data->pin = hw - irq_base; - eint_data->eint_offset = bank->eint_offset; - return eint_data; -} - static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { - struct samsung_pinctrl_drv_data *d = h->host_data; - struct exynos_geint_data *eint_data; - - eint_data = exynos_get_eint_data(hw, d); - if (!eint_data) - return -EINVAL; + struct samsung_pin_bank *b = h->host_data; - irq_set_handler_data(virq, eint_data); - irq_set_chip_data(virq, h->host_data); + irq_set_chip_data(virq, b); irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip, handle_level_irq); set_irq_flags(virq, IRQF_VALID); return 0; } -static void exynos_gpio_irq_unmap(struct irq_domain *h, unsigned int virq) -{ - struct samsung_pinctrl_drv_data *d = h->host_data; - struct exynos_geint_data *eint_data; - - eint_data = irq_get_handler_data(virq); - devm_kfree(d->dev, eint_data); -} - /* * irq domain callbacks for external gpio interrupt controller. */ static const struct irq_domain_ops exynos_gpio_irqd_ops = { .map = exynos_gpio_irq_map, - .unmap = exynos_gpio_irq_unmap, .xlate = irq_domain_xlate_twocell, }; @@ -229,7 +171,7 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) return IRQ_HANDLED; bank += (group - 1); - virq = irq_linear_revmap(d->gpio_irqd, bank->irq_base + pin); + virq = irq_linear_revmap(bank->irq_domain, pin); if (!virq) return IRQ_NONE; generic_handle_irq(virq); @@ -242,8 +184,10 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) */ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) { + struct samsung_pin_bank *bank; struct device *dev = d->dev; unsigned int ret; + unsigned int i; if (!d->irq) { dev_err(dev, "irq number not available\n"); @@ -257,11 +201,16 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) return -ENXIO; } - d->gpio_irqd = irq_domain_add_linear(dev->of_node, d->ctrl->nr_gint, - &exynos_gpio_irqd_ops, d); - if (!d->gpio_irqd) { - dev_err(dev, "gpio irq domain allocation failed\n"); - return -ENXIO; + bank = d->ctrl->pin_banks; + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { + if (bank->eint_type != EINT_TYPE_GPIO) + continue; + bank->irq_domain = irq_domain_add_linear(bank->of_node, + bank->nr_pins, &exynos_gpio_irqd_ops, bank); + if (!bank->irq_domain) { + dev_err(dev, "gpio irq domain add failed\n"); + return -ENXIO; + } } return 0; diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 5d8e380..f05efa0 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -74,18 +74,6 @@ } /** - * struct exynos_geint_data: gpio eint specific data for irq_chip callbacks. - * @bank: pin bank from which this gpio interrupt originates. - * @pin: pin number within the bank. - * @eint_offset: offset to be added to the con/pend/mask register bank base. - */ -struct exynos_geint_data { - struct samsung_pin_bank *bank; - u32 pin; - u32 eint_offset; -}; - -/** * struct exynos_weint_data: irq specific data for all the wakeup interrupts * generated by the external wakeup interrupt controller. * @domain: irq domain representing the external wakeup interrupts diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 53493c3..e1ef5d2 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -813,10 +813,6 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( bank->drvdata = d; bank->pin_base = ctrl->nr_pins; ctrl->nr_pins += bank->nr_pins; - if (bank->eint_type == EINT_TYPE_GPIO) { - bank->irq_base = ctrl->nr_gint; - ctrl->nr_gint += bank->nr_pins; - } } for_each_child_of_node(node, np) { diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index d77d9bc..e56be223 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -109,10 +109,10 @@ struct samsung_pinctrl_drv_data; * @conpdn_width: width of the sleep mode function selector bin field. * @pudpdn_width: width of the sleep mode pull up/down selector bit field. * @eint_type: type of the external interrupt supported by the bank. - * @irq_base: starting controller local irq number of the bank. * @name: name to be prefixed for each pin in this pin bank. * @of_node: OF node of the bank. * @drvdata: link to controller driver data + * @irq_domain: IRQ domain of the bank. */ struct samsung_pin_bank { u32 pctl_offset; @@ -125,10 +125,10 @@ struct samsung_pin_bank { u8 pudpdn_width; enum eint_type eint_type; u32 eint_offset; - u32 irq_base; char *name; struct device_node *of_node; struct samsung_pinctrl_drv_data *drvdata; + struct irq_domain *irq_domain; }; /** @@ -137,7 +137,6 @@ struct samsung_pin_bank { * @nr_banks: number of pin banks. * @base: starting system wide pin number. * @nr_pins: number of pins supported by the controller. - * @nr_gint: number of external gpio interrupts supported. * @nr_wint: number of external wakeup interrupts supported. * @geint_con: offset of the ext-gpio controller registers. * @geint_mask: offset of the ext-gpio interrupt mask registers. @@ -158,7 +157,6 @@ struct samsung_pin_ctrl { u32 base; u32 nr_pins; - u32 nr_gint; u32 nr_wint; u32 geint_con; @@ -205,7 +203,6 @@ struct samsung_pinctrl_drv_data { const struct samsung_pmx_func *pmx_functions; unsigned int nr_functions; - struct irq_domain *gpio_irqd; struct irq_domain *wkup_irqd; struct gpio_chip *gc; -- cgit v0.10.2 From d3a7b9e3a168df881a0ae3bd0d582f44a5d5aca3 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:17 +0200 Subject: pinctrl: samsung: Use one GPIO chip per pin bank This patch modifies the pinctrl-samsung driver to register one GPIO chip per pin bank, instead of a single chip for all pin banks of the controller. It simplifies GPIO accesses a lot (constant time instead of looping through the list of banks to find the right one) and should have a good effect on performance of any bit-banging driver. In addition it allows to reference GPIO pins by a phandle to the bank node and a local pin offset inside of the bank (similar to previous gpiolib driver), which is more clear and readable than using indices relative to the whole pin controller. Example: device { /* ... */ gpios = <&gpk0 4 0>; /* ... */ }; Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index e1ef5d2..0a38368 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -48,6 +48,11 @@ struct pin_config { static unsigned int pin_base = 0; +static inline struct samsung_pin_bank *gc_to_pin_bank(struct gpio_chip *gc) +{ + return container_of(gc, struct samsung_pin_bank, gpio_chip); +} + /* check if the selector is a valid pin group selector */ static int samsung_get_group_count(struct pinctrl_dev *pctldev) { @@ -333,9 +338,12 @@ static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, void __iomem *reg; u32 data, pin_offset, mask, shift; + bank = gc_to_pin_bank(range->gc); drvdata = pinctrl_dev_get_drvdata(pctldev); - pin_to_reg_bank(drvdata, offset, ®, &pin_offset, &bank); + pin_offset = offset - bank->pin_base; + reg = drvdata->virt_base + bank->pctl_offset; + mask = (1 << bank->func_width) - 1; shift = pin_offset * bank->func_width; @@ -469,17 +477,16 @@ static struct pinconf_ops samsung_pinconf_ops = { /* gpiolib gpio_set callback function */ static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value) { + struct samsung_pin_bank *bank = gc_to_pin_bank(gc); void __iomem *reg; - u32 pin_offset, data; - struct samsung_pinctrl_drv_data *drvdata; + u32 data; - drvdata = dev_get_drvdata(gc->dev); + reg = bank->drvdata->virt_base + bank->pctl_offset; - pin_to_reg_bank(drvdata, offset, ®, &pin_offset, NULL); data = readl(reg + DAT_REG); - data &= ~(1 << pin_offset); + data &= ~(1 << offset); if (value) - data |= 1 << pin_offset; + data |= 1 << offset; writel(data, reg + DAT_REG); } @@ -487,14 +494,13 @@ static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value) static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset) { void __iomem *reg; - u32 pin_offset, data; - struct samsung_pinctrl_drv_data *drvdata; + u32 data; + struct samsung_pin_bank *bank = gc_to_pin_bank(gc); - drvdata = dev_get_drvdata(gc->dev); + reg = bank->drvdata->virt_base + bank->pctl_offset; - pin_to_reg_bank(drvdata, offset, ®, &pin_offset, NULL); data = readl(reg + DAT_REG); - data >>= pin_offset; + data >>= offset; data &= 1; return data; } @@ -724,12 +730,16 @@ static int __init samsung_pinctrl_register(struct platform_device *pdev, return -EINVAL; } - drvdata->grange.name = "samsung-pctrl-gpio-range"; - drvdata->grange.id = 0; - drvdata->grange.base = drvdata->ctrl->base; - drvdata->grange.npins = drvdata->ctrl->nr_pins; - drvdata->grange.gc = drvdata->gc; - pinctrl_add_gpio_range(drvdata->pctl_dev, &drvdata->grange); + for (bank = 0; bank < drvdata->ctrl->nr_banks; ++bank) { + pin_bank = &drvdata->ctrl->pin_banks[bank]; + pin_bank->grange.name = pin_bank->name; + pin_bank->grange.id = bank; + pin_bank->grange.pin_base = pin_bank->pin_base; + pin_bank->grange.base = pin_bank->gpio_chip.base; + pin_bank->grange.npins = pin_bank->gpio_chip.ngpio; + pin_bank->grange.gc = &pin_bank->gpio_chip; + pinctrl_add_gpio_range(drvdata->pctl_dev, &pin_bank->grange); + } ret = samsung_pinctrl_parse_dt(pdev, drvdata); if (ret) { @@ -740,49 +750,68 @@ static int __init samsung_pinctrl_register(struct platform_device *pdev, return 0; } +static const struct gpio_chip samsung_gpiolib_chip = { + .set = samsung_gpio_set, + .get = samsung_gpio_get, + .direction_input = samsung_gpio_direction_input, + .direction_output = samsung_gpio_direction_output, + .owner = THIS_MODULE, +}; + /* register the gpiolib interface with the gpiolib subsystem */ static int __init samsung_gpiolib_register(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; struct gpio_chip *gc; int ret; + int i; - gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); - if (!gc) { - dev_err(&pdev->dev, "mem alloc for gpio_chip failed\n"); - return -ENOMEM; - } - - drvdata->gc = gc; - gc->base = drvdata->ctrl->base; - gc->ngpio = drvdata->ctrl->nr_pins; - gc->dev = &pdev->dev; - gc->set = samsung_gpio_set; - gc->get = samsung_gpio_get; - gc->direction_input = samsung_gpio_direction_input; - gc->direction_output = samsung_gpio_direction_output; - gc->label = drvdata->ctrl->label; - gc->owner = THIS_MODULE; - ret = gpiochip_add(gc); - if (ret) { - dev_err(&pdev->dev, "failed to register gpio_chip %s, error " - "code: %d\n", gc->label, ret); - return ret; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + bank->gpio_chip = samsung_gpiolib_chip; + + gc = &bank->gpio_chip; + gc->base = ctrl->base + bank->pin_base; + gc->ngpio = bank->nr_pins; + gc->dev = &pdev->dev; + gc->of_node = bank->of_node; + gc->label = bank->name; + + ret = gpiochip_add(gc); + if (ret) { + dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n", + gc->label, ret); + goto fail; + } } return 0; + +fail: + for (--i, --bank; i >= 0; --i, --bank) + if (gpiochip_remove(&bank->gpio_chip)) + dev_err(&pdev->dev, "gpio chip %s remove failed\n", + bank->gpio_chip.label); + return ret; } /* unregister the gpiolib interface with the gpiolib subsystem */ static int __init samsung_gpiolib_unregister(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { - int ret = gpiochip_remove(drvdata->gc); - if (ret) { + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int ret = 0; + int i; + + for (i = 0; !ret && i < ctrl->nr_banks; ++i, ++bank) + ret = gpiochip_remove(&bank->gpio_chip); + + if (ret) dev_err(&pdev->dev, "gpio chip remove failed\n"); - return ret; - } - return 0; + + return ret; } static const struct of_device_id samsung_pinctrl_dt_match[]; diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index e56be223..dac40ff 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -23,6 +23,8 @@ #include #include +#include + /* register offsets within a pin bank */ #define DAT_REG 0x4 #define PUD_REG 0x8 @@ -113,6 +115,8 @@ struct samsung_pinctrl_drv_data; * @of_node: OF node of the bank. * @drvdata: link to controller driver data * @irq_domain: IRQ domain of the bank. + * @gpio_chip: GPIO chip of the bank. + * @grange: linux gpio pin range supported by this bank. */ struct samsung_pin_bank { u32 pctl_offset; @@ -129,6 +133,8 @@ struct samsung_pin_bank { struct device_node *of_node; struct samsung_pinctrl_drv_data *drvdata; struct irq_domain *irq_domain; + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range grange; }; /** @@ -186,8 +192,6 @@ struct samsung_pin_ctrl { * @nr_groups: number of such pin groups. * @pmx_functions: list of pin functions available to the driver. * @nr_function: number of such pin functions. - * @gc: gpio_chip instance registered with gpiolib. - * @grange: linux gpio pin range supported by this controller. */ struct samsung_pinctrl_drv_data { void __iomem *virt_base; @@ -204,9 +208,6 @@ struct samsung_pinctrl_drv_data { unsigned int nr_functions; struct irq_domain *wkup_irqd; - - struct gpio_chip *gc; - struct pinctrl_gpio_range grange; }; /** -- cgit v0.10.2 From a04b07c0fc4d63e3fb9fea84d48a177ac5bd9164 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:18 +0200 Subject: pinctrl: samsung: Use per-bank IRQ domain for wake-up interrupts This patch reworks wake-up interrupt handling in pinctrl-exynos driver, so each pin bank, which provides wake-up interrupts, has its own IRQ domain. Information about whether given pin bank provides wake-up interrupts, how many and whether they are separate or muxed are parsed from device tree. It gives following advantages: - interrupts can be specified in device tree in a more readable way, e.g. : device { /* ... */ interrupt-parent = <&gpx2>; interrupts = <4 0>; /* ... */ }; - the amount and layout of interrupts is not hardcoded in the code anymore, but defined in SoC-specific structure - bank and pin of each wake-up interrupt can be easily identified, to allow operations, such as setting the pin to EINT function, from irq_set_type() callback Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index f207d8d..6a4a1a0 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -445,6 +445,9 @@ #gpio-cells = <2>; interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; #interrupt-cells = <2>; }; @@ -453,6 +456,9 @@ #gpio-cells = <2>; interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; #interrupt-cells = <2>; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index c27aea7..d877dbe 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -56,13 +56,7 @@ wakup_eint: wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>, - <0 32 0>; + interrupts = <0 32 0>; }; }; diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index be757b1..4bf2fc4 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -218,46 +218,43 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) static void exynos_wkup_irq_unmask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2); + struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = b->drvdata; + unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask &= ~(1 << pin); + mask &= ~(1 << irqd->hwirq); writel(mask, d->virt_base + reg_mask); } static void exynos_wkup_irq_mask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2); + struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = b->drvdata; + unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask |= 1 << pin; + mask |= 1 << irqd->hwirq; writel(mask, d->virt_base + reg_mask); } static void exynos_wkup_irq_ack(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long pend = d->ctrl->weint_pend + (bank << 2); + struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = b->drvdata; + unsigned long pend = d->ctrl->weint_pend + b->eint_offset; - writel(1 << pin, d->virt_base + pend); + writel(1 << irqd->hwirq, d->virt_base + pend); } static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long reg_con = d->ctrl->weint_con + (bank << 2); + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned int pin = irqd->hwirq; + unsigned long reg_con = d->ctrl->weint_con + bank->eint_offset; unsigned long shift = EXYNOS_EINT_CON_LEN * pin; unsigned long con, trig_type; @@ -309,6 +306,7 @@ static struct irq_chip exynos_wkup_irq_chip = { static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) { struct exynos_weint_data *eintd = irq_get_handler_data(irq); + struct samsung_pin_bank *bank = eintd->bank; struct irq_chip *chip = irq_get_chip(irq); int eint_irq; @@ -318,20 +316,20 @@ static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) if (chip->irq_ack) chip->irq_ack(&desc->irq_data); - eint_irq = irq_linear_revmap(eintd->domain, eintd->irq); + eint_irq = irq_linear_revmap(bank->irq_domain, eintd->irq); generic_handle_irq(eint_irq); chip->irq_unmask(&desc->irq_data); chained_irq_exit(chip, desc); } -static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend, - struct irq_domain *domain) +static inline void exynos_irq_demux_eint(unsigned long pend, + struct irq_domain *domain) { unsigned int irq; while (pend) { irq = fls(pend) - 1; - generic_handle_irq(irq_find_mapping(domain, irq_base + irq)); + generic_handle_irq(irq_find_mapping(domain, irq)); pend &= ~(1 << irq); } } @@ -340,18 +338,22 @@ static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend, static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); - struct exynos_weint_data *eintd = irq_get_handler_data(irq); - struct samsung_pinctrl_drv_data *d = eintd->domain->host_data; + struct exynos_muxed_weint_data *eintd = irq_get_handler_data(irq); + struct samsung_pinctrl_drv_data *d = eintd->banks[0]->drvdata; + struct samsung_pin_ctrl *ctrl = d->ctrl; unsigned long pend; unsigned long mask; + int i; chained_irq_enter(chip, desc); - pend = readl(d->virt_base + d->ctrl->weint_pend + 0x8); - mask = readl(d->virt_base + d->ctrl->weint_mask + 0x8); - exynos_irq_demux_eint(16, pend & ~mask, eintd->domain); - pend = readl(d->virt_base + d->ctrl->weint_pend + 0xC); - mask = readl(d->virt_base + d->ctrl->weint_mask + 0xC); - exynos_irq_demux_eint(24, pend & ~mask, eintd->domain); + + for (i = 0; i < eintd->nr_banks; ++i) { + struct samsung_pin_bank *b = eintd->banks[i]; + pend = readl(d->virt_base + ctrl->weint_pend + b->eint_offset); + mask = readl(d->virt_base + ctrl->weint_mask + b->eint_offset); + exynos_irq_demux_eint(pend & ~mask, b->irq_domain); + } + chained_irq_exit(chip, desc); } @@ -381,7 +383,11 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) struct device *dev = d->dev; struct device_node *wkup_np = NULL; struct device_node *np; + struct samsung_pin_bank *bank; struct exynos_weint_data *weint_data; + struct exynos_muxed_weint_data *muxed_data; + unsigned int muxed_banks = 0; + unsigned int i; int idx, irq; for_each_child_of_node(dev->of_node, np) { @@ -393,40 +399,74 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) if (!wkup_np) return -ENODEV; - d->wkup_irqd = irq_domain_add_linear(wkup_np, d->ctrl->nr_wint, - &exynos_wkup_irqd_ops, d); - if (!d->wkup_irqd) { - dev_err(dev, "wakeup irq domain allocation failed\n"); - return -ENXIO; - } + bank = d->ctrl->pin_banks; + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { + if (bank->eint_type != EINT_TYPE_WKUP) + continue; - weint_data = devm_kzalloc(dev, sizeof(*weint_data) * 17, GFP_KERNEL); - if (!weint_data) { - dev_err(dev, "could not allocate memory for weint_data\n"); - return -ENOMEM; - } + bank->irq_domain = irq_domain_add_linear(bank->of_node, + bank->nr_pins, &exynos_wkup_irqd_ops, bank); + if (!bank->irq_domain) { + dev_err(dev, "wkup irq domain add failed\n"); + return -ENXIO; + } - irq = irq_of_parse_and_map(wkup_np, 16); - if (irq) { - weint_data[16].domain = d->wkup_irqd; - irq_set_chained_handler(irq, exynos_irq_demux_eint16_31); - irq_set_handler_data(irq, &weint_data[16]); - } else { - dev_err(dev, "irq number for EINT16-32 not found\n"); - } + if (!of_find_property(bank->of_node, "interrupts", NULL)) { + bank->eint_type = EINT_TYPE_WKUP_MUX; + ++muxed_banks; + continue; + } - for (idx = 0; idx < 16; idx++) { - weint_data[idx].domain = d->wkup_irqd; - weint_data[idx].irq = idx; + weint_data = devm_kzalloc(dev, bank->nr_pins + * sizeof(*weint_data), GFP_KERNEL); + if (!weint_data) { + dev_err(dev, "could not allocate memory for weint_data\n"); + return -ENOMEM; + } - irq = irq_of_parse_and_map(wkup_np, idx); - if (irq) { + for (idx = 0; idx < bank->nr_pins; ++idx) { + irq = irq_of_parse_and_map(bank->of_node, idx); + if (!irq) { + dev_err(dev, "irq number for eint-%s-%d not found\n", + bank->name, idx); + continue; + } + weint_data[idx].irq = idx; + weint_data[idx].bank = bank; irq_set_handler_data(irq, &weint_data[idx]); irq_set_chained_handler(irq, exynos_irq_eint0_15); - } else { - dev_err(dev, "irq number for eint-%x not found\n", idx); } } + + if (!muxed_banks) + return 0; + + irq = irq_of_parse_and_map(wkup_np, 0); + if (!irq) { + dev_err(dev, "irq number for muxed EINTs not found\n"); + return 0; + } + + muxed_data = devm_kzalloc(dev, sizeof(*muxed_data) + + muxed_banks*sizeof(struct samsung_pin_bank *), GFP_KERNEL); + if (!muxed_data) { + dev_err(dev, "could not allocate memory for muxed_data\n"); + return -ENOMEM; + } + + irq_set_chained_handler(irq, exynos_irq_demux_eint16_31); + irq_set_handler_data(irq, muxed_data); + + bank = d->ctrl->pin_banks; + idx = 0; + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { + if (bank->eint_type != EINT_TYPE_WKUP_MUX) + continue; + + muxed_data->banks[idx++] = bank; + } + muxed_data->nr_banks = muxed_banks; + return 0; } @@ -468,10 +508,10 @@ static struct samsung_pin_bank exynos4210_pin_banks1[] = { EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"), EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"), EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"), - EXYNOS_PIN_BANK_EINTN(8, 0xC00, "gpx0"), - EXYNOS_PIN_BANK_EINTN(8, 0xC20, "gpx1"), - EXYNOS_PIN_BANK_EINTN(8, 0xC40, "gpx2"), - EXYNOS_PIN_BANK_EINTN(8, 0xC60, "gpx3"), + EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), + EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04), + EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08), + EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c), }; /* pin banks of exynos4210 pin-controller 2 */ @@ -498,7 +538,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 1 data */ .pin_banks = exynos4210_pin_banks1, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks1), - .nr_wint = 32, .geint_con = EXYNOS_GPIO_ECON_OFFSET, .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index f05efa0..0a70889 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -73,13 +73,36 @@ .name = id \ } +#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs) \ + { \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .func_width = 4, \ + .pud_width = 2, \ + .drv_width = 2, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_offset = offs, \ + .name = id \ + } + /** * struct exynos_weint_data: irq specific data for all the wakeup interrupts * generated by the external wakeup interrupt controller. - * @domain: irq domain representing the external wakeup interrupts * @irq: interrupt number within the domain. + * @bank: bank responsible for this interrupt */ struct exynos_weint_data { - struct irq_domain *domain; - u32 irq; + unsigned int irq; + struct samsung_pin_bank *bank; +}; + +/** + * struct exynos_muxed_weint_data: irq specific data for muxed wakeup interrupts + * generated by the external wakeup interrupt controller. + * @nr_banks: count of banks being part of the mux + * @banks: array of banks being part of the mux + */ +struct exynos_muxed_weint_data { + unsigned int nr_banks; + struct samsung_pin_bank *banks[]; }; diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index dac40ff..0670d9e 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -66,6 +66,7 @@ enum pincfg_type { * @EINT_TYPE_NONE: bank does not support external interrupts * @EINT_TYPE_GPIO: bank supportes external gpio interrupts * @EINT_TYPE_WKUP: bank supportes external wakeup interrupts + * @EINT_TYPE_WKUP_MUX: bank supports multiplexed external wakeup interrupts * * Samsung GPIO controller groups all the available pins into banks. The pins * in a pin bank can support external gpio interrupts or external wakeup @@ -78,6 +79,7 @@ enum eint_type { EINT_TYPE_NONE, EINT_TYPE_GPIO, EINT_TYPE_WKUP, + EINT_TYPE_WKUP_MUX, }; /* maximum length of a pin in pin descriptor (example: "gpa0-0") */ @@ -143,7 +145,6 @@ struct samsung_pin_bank { * @nr_banks: number of pin banks. * @base: starting system wide pin number. * @nr_pins: number of pins supported by the controller. - * @nr_wint: number of external wakeup interrupts supported. * @geint_con: offset of the ext-gpio controller registers. * @geint_mask: offset of the ext-gpio interrupt mask registers. * @geint_pend: offset of the ext-gpio interrupt pending registers. @@ -163,7 +164,6 @@ struct samsung_pin_ctrl { u32 base; u32 nr_pins; - u32 nr_wint; u32 geint_con; u32 geint_mask; @@ -206,8 +206,6 @@ struct samsung_pinctrl_drv_data { unsigned int nr_groups; const struct samsung_pmx_func *pmx_functions; unsigned int nr_functions; - - struct irq_domain *wkup_irqd; }; /** -- cgit v0.10.2 From 22b9ba033bb4401e4cceb69c9e1af74a4631dd74 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:19 +0200 Subject: pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT Pins used as wake-up interrupts need to be configured as EINTs. This patch adds the required configuration code to exynos_wkup_irq_set_type, to set the pin as EINT when its interrupt trigger type is configured. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 4bf2fc4..73a0aa2 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -257,6 +257,7 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) unsigned long reg_con = d->ctrl->weint_con + bank->eint_offset; unsigned long shift = EXYNOS_EINT_CON_LEN * pin; unsigned long con, trig_type; + unsigned int mask; switch (type) { case IRQ_TYPE_EDGE_RISING: @@ -288,6 +289,16 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) con &= ~(EXYNOS_EINT_CON_MASK << shift); con |= trig_type << shift; writel(con, d->virt_base + reg_con); + + reg_con = bank->pctl_offset; + shift = pin * bank->func_width; + mask = (1 << bank->func_width) - 1; + + con = readl(d->virt_base + reg_con); + con &= ~(mask << shift); + con |= EXYNOS_EINT_FUNC << shift; + writel(con, d->virt_base + reg_con); + return 0; } -- cgit v0.10.2 From a19fe2d45cc550ca42a3b0be3e716a8452e4b0c6 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:20 +0200 Subject: pinctrl: samsung: Add GPIO to IRQ translation Some drivers require a way to translate GPIO pins to their IRQ numbers. This patch adds the .to_irq() gpiolib callback to pinctrl-samsung driver, which creates (if not present yet) and returns an IRQ mapping for given GPIO pin. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 0a38368..0db88bb 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "core.h" #include "pinctrl-samsung.h" @@ -528,6 +529,23 @@ static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset, } /* + * gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin + * and a virtual IRQ, if not already present. + */ +static int samsung_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct samsung_pin_bank *bank = gc_to_pin_bank(gc); + unsigned int virq; + + if (!bank->irq_domain) + return -ENXIO; + + virq = irq_create_mapping(bank->irq_domain, offset); + + return (virq) ? : -ENXIO; +} + +/* * Parse the pin names listed in the 'samsung,pins' property and convert it * into a list of gpio numbers are create a pin group from it. */ @@ -755,6 +773,7 @@ static const struct gpio_chip samsung_gpiolib_chip = { .get = samsung_gpio_get, .direction_input = samsung_gpio_direction_input, .direction_output = samsung_gpio_direction_output, + .to_irq = samsung_gpio_to_irq, .owner = THIS_MODULE, }; -- cgit v0.10.2 From b33ef91f4b799a5de5904c4b361df97a0c3ec7dd Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:21 +0200 Subject: Documentation: Update samsung-pinctrl device tree bindings documentation Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 03dee50..63806e2 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -13,8 +13,14 @@ Required Properties: - reg: Base address of the pin controller hardware module and length of the address space it occupies. -- interrupts: interrupt specifier for the controller. The format and value of - the interrupt specifier depends on the interrupt parent for the controller. +- Pin banks as child nodes: Pin banks of the controller are represented by child + nodes of the controller node. Bank name is taken from name of the node. Each + bank node must contain following properties: + + - gpio-controller: identifies the node as a gpio controller and pin bank. + - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See generic + GPIO binding documentation for description of particular cells. - Pin mux/config groups as child nodes: The pin mux (selecting pin function mode) and pin config (pull up/down, driver strength) settings are represented @@ -72,16 +78,24 @@ used as system wakeup events. A. External GPIO Interrupts: For supporting external gpio interrupts, the following properties should be specified in the pin-controller device node. -- interrupt-controller: identifies the controller node as interrupt-parent. -- #interrupt-cells: the value of this property should be 2. - - First Cell: represents the external gpio interrupt number local to the - external gpio interrupt space of the controller. - - Second Cell: flags to identify the type of the interrupt - - 1 = rising edge triggered - - 2 = falling edge triggered - - 3 = rising and falling edge triggered - - 4 = high level triggered - - 8 = low level triggered + - interrupt-parent: phandle of the interrupt parent to which the external + GPIO interrupts are forwarded to. + - interrupts: interrupt specifier for the controller. The format and value of + the interrupt specifier depends on the interrupt parent for the controller. + + In addition, following properties must be present in node of every bank + of pins supporting GPIO interrupts: + + - interrupt-controller: identifies the controller node as interrupt-parent. + - #interrupt-cells: the value of this property should be 2. + - First Cell: represents the external gpio interrupt number local to the + external gpio interrupt space of the controller. + - Second Cell: flags to identify the type of the interrupt + - 1 = rising edge triggered + - 2 = falling edge triggered + - 3 = rising and falling edge triggered + - 4 = high level triggered + - 8 = low level triggered B. External Wakeup Interrupts: For supporting external wakeup interrupts, a child node representing the external wakeup interrupt controller should be @@ -94,6 +108,11 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a found on Samsung Exynos4210 SoC. - interrupt-parent: phandle of the interrupt parent to which the external wakeup interrupts are forwarded to. + - interrupts: interrupt used by multiplexed wakeup interrupts. + + In addition, following properties must be present in node of every bank + of pins supporting wake-up interrupts: + - interrupt-controller: identifies the node as interrupt-parent. - #interrupt-cells: the value of this property should be 2 - First Cell: represents the external wakeup interrupt number local to @@ -105,11 +124,63 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a - 4 = high level triggered - 8 = low level triggered + Node of every bank of pins supporting direct wake-up interrupts (without + multiplexing) must contain following properties: + + - interrupt-parent: phandle of the interrupt parent to which the external + wakeup interrupts are forwarded to. + - interrupts: interrupts of the interrupt parent which are used for external + wakeup interrupts from pins of the bank, must contain interrupts for all + pins of the bank. + Aliases: All the pin controller nodes should be represented in the aliases node using the following format 'pinctrl{n}' where n is a unique number for the alias. +Example: A pin-controller node with pin banks: + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,pinctrl-exynos4210"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + + /* ... */ + + /* Pin bank without external interrupts */ + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + /* ... */ + + /* Pin bank with external GPIO or muxed wake-up interrupts */ + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* ... */ + + /* Pin bank with external direct wake-up interrupts */ + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + #interrupt-cells = <2>; + }; + + /* ... */ + }; + Example 1: A pin-controller node with pin groups. pinctrl_0: pinctrl@11400000 { @@ -117,6 +188,8 @@ Example 1: A pin-controller node with pin groups. reg = <0x11400000 0x1000>; interrupts = <0 47 0>; + /* ... */ + uart0_data: uart0-data { samsung,pins = "gpa0-0", "gpa0-1"; samsung,pin-function = <2>; @@ -158,20 +231,14 @@ Example 2: A pin-controller node with external wakeup interrupt controller node. pinctrl_1: pinctrl@11000000 { compatible = "samsung,pinctrl-exynos4210"; reg = <0x11000000 0x1000>; - interrupts = <0 46 0>; - interrupt-controller; - #interrupt-cells = <2>; + interrupts = <0 46 0> - wakup_eint: wakeup-interrupt-controller { + /* ... */ + + wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>, - <0 32 0>; + interrupts = <0 32 0>; }; }; @@ -190,7 +257,8 @@ Example 4: Set up the default pin state for uart controller. static int s3c24xx_serial_probe(struct platform_device *pdev) { struct pinctrl *pinctrl; - ... - ... + + /* ... */ + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); } -- cgit v0.10.2