From 673b8b70cfae2cd0428a8ab5647571521348549a Mon Sep 17 00:00:00 2001 From: Anders Berggren Date: Fri, 4 Feb 2011 07:32:32 +0000 Subject: igb: fix hw timestamping Hardware timestamping for Intel 82580 didn't work in either 2.6.36 or 2.6.37. Comparing it to Intel's igb-2.4.12 I found that the timecounter_init clock/counter initialization was done too early. Signed-off-by: Anders Berggren Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index b4f92b0..5366f2a 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -106,6 +106,7 @@ static void igb_free_all_rx_resources(struct igb_adapter *); static void igb_setup_mrqc(struct igb_adapter *); static int igb_probe(struct pci_dev *, const struct pci_device_id *); static void __devexit igb_remove(struct pci_dev *pdev); +static void igb_init_hw_timer(struct igb_adapter *adapter); static int igb_sw_init(struct igb_adapter *); static int igb_open(struct net_device *); static int igb_close(struct net_device *); @@ -2048,6 +2049,9 @@ static int __devinit igb_probe(struct pci_dev *pdev, } #endif + /* do hw tstamp init after resetting */ + igb_init_hw_timer(adapter); + dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n"); /* print bus type/speed/width info */ dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n", @@ -2384,7 +2388,6 @@ static int __devinit igb_sw_init(struct igb_adapter *adapter) return -ENOMEM; } - igb_init_hw_timer(adapter); igb_probe_vfs(adapter); /* Explicitly disable IRQ since the NIC can be in any state. */ -- cgit v0.10.2 From 7ef5ed1ce96c3f9a95b7327279f94b0700c689ef Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Sat, 12 Mar 2011 08:59:47 +0000 Subject: igb: Add messaging for thermal sensor events on i350 devices This feature adds messaging to the link status change to notify the user if the device returned from a downshift or power off event due to the Thermal Sensor feature in i350 parts. Feature is only available on internal copper ports. Signed-off-by: Carolyn Wyborny Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h index 9bb1928..6b80d40 100644 --- a/drivers/net/igb/e1000_defines.h +++ b/drivers/net/igb/e1000_defines.h @@ -51,6 +51,7 @@ #define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 #define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 #define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 +#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 #define E1000_CTRL_EXT_EIAME 0x01000000 #define E1000_CTRL_EXT_IRCA 0x00000001 /* Interrupt delay cancellation */ @@ -788,6 +789,10 @@ #define E1000_MDIC_ERROR 0x40000000 #define E1000_MDIC_DEST 0x80000000 +/* Thermal Sensor */ +#define E1000_THSTAT_PWR_DOWN 0x00000001 /* Power Down Event */ +#define E1000_THSTAT_LINK_THROTTLE 0x00000002 /* Link Speed Throttle Event */ + /* Energy Efficient Ethernet */ #define E1000_IPCNFG_EEE_1G_AN 0x00000008 /* EEE Enable 1G AN */ #define E1000_IPCNFG_EEE_100M_AN 0x00000004 /* EEE Enable 100M AN */ diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h index ad77ed5..958ca3b 100644 --- a/drivers/net/igb/e1000_regs.h +++ b/drivers/net/igb/e1000_regs.h @@ -342,6 +342,9 @@ #define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */ #define E1000_EEER 0x0E30 /* Energy Efficient Ethernet */ +/* Thermal Sensor Register */ +#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */ + /* OS2BMC Registers */ #define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */ #define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */ diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 5366f2a..3d850af 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -3550,7 +3550,7 @@ static void igb_watchdog_task(struct work_struct *work) watchdog_task); struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; - u32 link; + u32 link, ctrl_ext, thstat; int i; link = igb_has_link(adapter); @@ -3574,6 +3574,25 @@ static void igb_watchdog_task(struct work_struct *work) ((ctrl & E1000_CTRL_RFCE) ? "RX" : ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None"))); + /* check for thermal sensor event on i350, + * copper only */ + if (hw->mac.type == e1000_i350) { + thstat = rd32(E1000_THSTAT); + ctrl_ext = rd32(E1000_CTRL_EXT); + if ((hw->phy.media_type == + e1000_media_type_copper) && !(ctrl_ext & + E1000_CTRL_EXT_LINK_MODE_SGMII)) { + if (thstat & + E1000_THSTAT_LINK_THROTTLE) { + printk(KERN_INFO "igb: %s The " + "network adapter link " + "speed was downshifted " + "because it " + "overheated.\n", + netdev->name); + } + } + } /* adjust timeout factor according to speed/duplex */ adapter->tx_timeout_factor = 1; switch (adapter->link_speed) { @@ -3599,6 +3618,22 @@ static void igb_watchdog_task(struct work_struct *work) if (netif_carrier_ok(netdev)) { adapter->link_speed = 0; adapter->link_duplex = 0; + /* check for thermal sensor event on i350 + * copper only*/ + if (hw->mac.type == e1000_i350) { + thstat = rd32(E1000_THSTAT); + ctrl_ext = rd32(E1000_CTRL_EXT); + if ((hw->phy.media_type == + e1000_media_type_copper) && !(ctrl_ext & + E1000_CTRL_EXT_LINK_MODE_SGMII)) { + if (thstat & E1000_THSTAT_PWR_DOWN) { + printk(KERN_ERR "igb: %s The " + "network adapter was stopped " + "because it overheated.\n", + netdev->name); + } + } + } /* Links status message must follow this format */ printk(KERN_INFO "igb: %s NIC Link is Down\n", netdev->name); -- cgit v0.10.2