From d9ba573718666df2e7e30d671f81bba39d07f91c Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 14 Dec 2012 09:09:11 -0800
Subject: ARM: OMAP: Move plat/omap-serial.h to
 include/linux/platform_data/serial-omap.h

We need to move this file to allow ARM multiplatform configurations
to build for omap2+. This can now be done as this file now only
contains platform_data.

cc: Russell King <linux@arm.linux.org.uk>
cc: Alan Cox <alan@linux.intel.com>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Govindraj.R <govindraj.raja@ti.com>
cc: Kevin Hilman <khilman@ti.com>
cc: linux-serial@vger.kernel.org
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 93d1025..04fdbc4 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -27,8 +27,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/console.h>
 #include <linux/omap-dma.h>
-
-#include <plat/omap-serial.h>
+#include <linux/platform_data/serial-omap.h>
 
 #include "common.h"
 #include "omap_hwmod.h"
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
deleted file mode 100644
index ff9b0aa..0000000
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Driver for OMAP-UART controller.
- * Based on drivers/serial/8250.c
- *
- * Copyright (C) 2010 Texas Instruments.
- *
- * Authors:
- *	Govindraj R	<govindraj.raja@ti.com>
- *	Thara Gopinath	<thara@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __OMAP_SERIAL_H__
-#define __OMAP_SERIAL_H__
-
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/pm_qos.h>
-
-#define DRIVER_NAME	"omap_uart"
-
-/*
- * Use tty device name as ttyO, [O -> OMAP]
- * in bootargs we specify as console=ttyO0 if uart1
- * is used as console uart.
- */
-#define OMAP_SERIAL_NAME	"ttyO"
-
-struct omap_uart_port_info {
-	bool			dma_enabled;	/* To specify DMA Mode */
-	unsigned int		uartclk;	/* UART clock rate */
-	upf_t			flags;		/* UPF_* flags */
-	unsigned int		dma_rx_buf_size;
-	unsigned int		dma_rx_timeout;
-	unsigned int		autosuspend_timeout;
-	unsigned int		dma_rx_poll_rate;
-	int			DTR_gpio;
-	int			DTR_inverted;
-	int			DTR_present;
-
-	int (*get_context_loss_count)(struct device *);
-	void (*set_forceidle)(struct device *);
-	void (*set_noidle)(struct device *);
-	void (*enable_wakeup)(struct device *, bool);
-};
-
-#endif /* __OMAP_SERIAL_H__ */
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 23f797e..57d6b29 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -41,8 +41,7 @@
 #include <linux/of.h>
 #include <linux/gpio.h>
 #include <linux/pinctrl/consumer.h>
-
-#include <plat/omap-serial.h>
+#include <linux/platform_data/serial-omap.h>
 
 #define OMAP_MAX_HSUART_PORTS	6
 
diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h
new file mode 100644
index 0000000..ff9b0aa
--- /dev/null
+++ b/include/linux/platform_data/serial-omap.h
@@ -0,0 +1,51 @@
+/*
+ * Driver for OMAP-UART controller.
+ * Based on drivers/serial/8250.c
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * Authors:
+ *	Govindraj R	<govindraj.raja@ti.com>
+ *	Thara Gopinath	<thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __OMAP_SERIAL_H__
+#define __OMAP_SERIAL_H__
+
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/pm_qos.h>
+
+#define DRIVER_NAME	"omap_uart"
+
+/*
+ * Use tty device name as ttyO, [O -> OMAP]
+ * in bootargs we specify as console=ttyO0 if uart1
+ * is used as console uart.
+ */
+#define OMAP_SERIAL_NAME	"ttyO"
+
+struct omap_uart_port_info {
+	bool			dma_enabled;	/* To specify DMA Mode */
+	unsigned int		uartclk;	/* UART clock rate */
+	upf_t			flags;		/* UPF_* flags */
+	unsigned int		dma_rx_buf_size;
+	unsigned int		dma_rx_timeout;
+	unsigned int		autosuspend_timeout;
+	unsigned int		dma_rx_poll_rate;
+	int			DTR_gpio;
+	int			DTR_inverted;
+	int			DTR_present;
+
+	int (*get_context_loss_count)(struct device *);
+	void (*set_forceidle)(struct device *);
+	void (*set_noidle)(struct device *);
+	void (*enable_wakeup)(struct device *, bool);
+};
+
+#endif /* __OMAP_SERIAL_H__ */
-- 
cgit v0.10.2