From f19420c1acb0b573c88a12deb2d42035e22d4a17 Mon Sep 17 00:00:00 2001 From: Markus Franke Date: Thu, 12 Apr 2012 00:40:30 +0200 Subject: w1: Add 1-wire slave device driver for DS28E04-100 This patch adds a 1-wire slave device driver for the DS28E04-100. Signed-off-by: Markus Franke Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index eb9e376..605ee36 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig @@ -94,6 +94,13 @@ config W1_SLAVE_DS2781 If you are unsure, say N. +config W1_SLAVE_DS28E04 + tristate "4096-Bit Addressable 1-Wire EEPROM with PIO (DS28E04-100)" + depends on W1 + help + Say Y here if you want to use a 1-wire + 4kb EEPROM with PIO family device (DS28E04). + config W1_SLAVE_BQ27000 tristate "BQ27000 slave support" depends on W1 diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index c4f1859..05188f6 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o +obj-$(CONFIG_W1_SLAVE_DS28E04) += w1_ds28e04.o diff --git a/drivers/w1/slaves/w1_ds28e04.c b/drivers/w1/slaves/w1_ds28e04.c new file mode 100644 index 0000000..f652db3 --- /dev/null +++ b/drivers/w1/slaves/w1_ds28e04.c @@ -0,0 +1,462 @@ +/* + * w1_ds28e04.c - w1 family 1C (DS28E04) driver + * + * Copyright (c) 2012 Markus Franke + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define CRC16_INIT 0 +#define CRC16_VALID 0xb001 + +#include "../w1.h" +#include "../w1_int.h" +#include "../w1_family.h" + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Markus Franke , "); +MODULE_DESCRIPTION("w1 family 1C driver for DS28E04, 4kb EEPROM and PIO"); + +/* Allow the strong pullup to be disabled, but default to enabled. + * If it was disabled a parasite powered device might not get the required + * current to copy the data from the scratchpad to EEPROM. If it is enabled parasite powered + * devices have a better chance of getting the current required. + */ +static int w1_strong_pullup = 1; +module_param_named(strong_pullup, w1_strong_pullup, int, 0); + +/* enable/disable CRC checking on DS28E04-100 memory accesses */ +static char w1_enable_crccheck = 1; + +#define W1_EEPROM_SIZE 512 +#define W1_PAGE_COUNT 16 +#define W1_PAGE_SIZE 32 +#define W1_PAGE_BITS 5 +#define W1_PAGE_MASK 0x1F + +#define W1_F1C_READ_EEPROM 0xF0 +#define W1_F1C_WRITE_SCRATCH 0x0F +#define W1_F1C_READ_SCRATCH 0xAA +#define W1_F1C_COPY_SCRATCH 0x55 +#define W1_F1C_ACCESS_WRITE 0x5A + +#define W1_1C_REG_LOGIC_STATE 0x220 + +struct w1_f1C_data { + u8 memory[W1_EEPROM_SIZE]; + u32 validcrc; +}; + +/** + * Check the file size bounds and adjusts count as needed. + * This would not be needed if the file size didn't reset to 0 after a write. + */ +static inline size_t w1_f1C_fix_count(loff_t off, size_t count, size_t size) +{ + if (off > size) + return 0; + + if ((off + count) > size) + return (size - off); + + return count; +} + +static int w1_f1C_refresh_block(struct w1_slave *sl, struct w1_f1C_data *data, + int block) +{ + u8 wrbuf[3]; + int off = block * W1_PAGE_SIZE; + + if (data->validcrc & (1 << block)) + return 0; + + if (w1_reset_select_slave(sl)) { + data->validcrc = 0; + return -EIO; + } + + wrbuf[0] = W1_F1C_READ_EEPROM; + wrbuf[1] = off & 0xff; + wrbuf[2] = off >> 8; + w1_write_block(sl->master, wrbuf, 3); + w1_read_block(sl->master, &data->memory[off], W1_PAGE_SIZE); + + /* cache the block if the CRC is valid */ + if (crc16(CRC16_INIT, &data->memory[off], W1_PAGE_SIZE) == CRC16_VALID) + data->validcrc |= (1 << block); + + return 0; +} + +static int w1_f1C_read(struct w1_slave *sl, int addr, int len, char *data) +{ + u8 wrbuf[3]; + + /* read directly from the EEPROM */ + if (w1_reset_select_slave(sl)) + return -EIO; + + wrbuf[0] = W1_F1C_READ_EEPROM; + wrbuf[1] = addr & 0xff; + wrbuf[2] = addr >> 8; + + w1_write_block(sl->master, wrbuf, sizeof(wrbuf)); + return w1_read_block(sl->master, data, len); +} + +static ssize_t w1_f1C_read_bin(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + struct w1_f1C_data *data = sl->family_data; + int i, min_page, max_page; + + if ((count = w1_f1C_fix_count(off, count, W1_EEPROM_SIZE)) == 0) + return 0; + + mutex_lock(&sl->master->mutex); + + if(w1_enable_crccheck) { + min_page = (off >> W1_PAGE_BITS); + max_page = (off + count - 1) >> W1_PAGE_BITS; + for (i = min_page; i <= max_page; i++) { + if (w1_f1C_refresh_block(sl, data, i)) { + count = -EIO; + goto out_up; + } + } + memcpy(buf, &data->memory[off], count); + } + else { + count = w1_f1C_read(sl, off, count, buf); + } + +out_up: + mutex_unlock(&sl->master->mutex); + + return count; +} + +/** + * Writes to the scratchpad and reads it back for verification. + * Then copies the scratchpad to EEPROM. + * The data must be on one page. + * The master must be locked. + * + * @param sl The slave structure + * @param addr Address for the write + * @param len length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK)) + * @param data The data to write + * @return 0=Success -1=failure + */ +static int w1_f1C_write(struct w1_slave *sl, int addr, int len, const u8 *data) +{ + u8 wrbuf[4]; + u8 rdbuf[W1_PAGE_SIZE + 3]; + u8 es = (addr + len - 1) & 0x1f; + unsigned int tm = 10; + int i; + struct w1_f1C_data *f1C = sl->family_data; + + /* Write the data to the scratchpad */ + if (w1_reset_select_slave(sl)) + return -1; + + wrbuf[0] = W1_F1C_WRITE_SCRATCH; + wrbuf[1] = addr & 0xff; + wrbuf[2] = addr >> 8; + + w1_write_block(sl->master, wrbuf, 3); + w1_write_block(sl->master, data, len); + + /* Read the scratchpad and verify */ + if (w1_reset_select_slave(sl)) + return -1; + + w1_write_8(sl->master, W1_F1C_READ_SCRATCH); + w1_read_block(sl->master, rdbuf, len + 3); + + /* Compare what was read against the data written */ + if ((rdbuf[0] != wrbuf[1]) || (rdbuf[1] != wrbuf[2]) || + (rdbuf[2] != es) || (memcmp(data, &rdbuf[3], len) != 0)) + return -1; + + /* Copy the scratchpad to EEPROM */ + if (w1_reset_select_slave(sl)) + return -1; + + wrbuf[0] = W1_F1C_COPY_SCRATCH; + wrbuf[3] = es; + + for(i = 0; i < sizeof(wrbuf); ++i) { + /* issue 10ms strong pullup (or delay) on the last byte for writing the data from the scratchpad to EEPROM */ + if(w1_strong_pullup && i == sizeof(wrbuf)-1) + w1_next_pullup(sl->master, tm); + + w1_write_8(sl->master, wrbuf[i]); + } + + if(!w1_strong_pullup) + msleep(tm); + + if(w1_enable_crccheck) { + /* invalidate cached data */ + f1C->validcrc &= ~(1 << (addr >> W1_PAGE_BITS)); + } + + /* Reset the bus to wake up the EEPROM (this may not be needed) */ + w1_reset_bus(sl->master); + + return 0; +} + +static ssize_t w1_f1C_write_bin(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) + +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int addr, len, idx; + + if ((count = w1_f1C_fix_count(off, count, W1_EEPROM_SIZE)) == 0) + return 0; + + if(w1_enable_crccheck) { + /* can only write full blocks in cached mode */ + if ((off & W1_PAGE_MASK) || (count & W1_PAGE_MASK)) { + dev_err(&sl->dev, "invalid offset/count off=%d cnt=%zd\n", + (int)off, count); + return -EINVAL; + } + + /* make sure the block CRCs are valid */ + for (idx = 0; idx < count; idx += W1_PAGE_SIZE) { + if (crc16(CRC16_INIT, &buf[idx], W1_PAGE_SIZE) != CRC16_VALID) { + dev_err(&sl->dev, "bad CRC at offset %d\n", (int)off); + return -EINVAL; + } + } + } + + mutex_lock(&sl->master->mutex); + + /* Can only write data to one page at a time */ + idx = 0; + while (idx < count) { + addr = off + idx; + len = W1_PAGE_SIZE - (addr & W1_PAGE_MASK); + if (len > (count - idx)) + len = count - idx; + + if (w1_f1C_write(sl, addr, len, &buf[idx]) < 0) { + count = -EIO; + goto out_up; + } + idx += len; + } + +out_up: + mutex_unlock(&sl->master->mutex); + + return count; +} + +static ssize_t w1_f1C_read_pio(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) + +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int ret; + + /* check arguments */ + if(off != 0 || count != 1 || buf == NULL) + return -EINVAL; + + mutex_lock(&sl->master->mutex); + ret = w1_f1C_read(sl, W1_1C_REG_LOGIC_STATE, count, buf); + mutex_unlock(&sl->master->mutex); + + return ret; +} + +static ssize_t w1_f1C_write_pio(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) + +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + u8 wrbuf[3]; + u8 ack; + + /* check arguments */ + if(off != 0 || count != 1 || buf == NULL) + return -EINVAL; + + mutex_lock(&sl->master->mutex); + + /* Write the PIO data */ + if (w1_reset_select_slave(sl)) + return -1; + + /* set bit 7..2 to value '1' */ + *buf = *buf | 0xFC; + + wrbuf[0] = W1_F1C_ACCESS_WRITE; + wrbuf[1] = *buf; + wrbuf[2] = ~(*buf); + w1_write_block(sl->master, wrbuf, 3); + + w1_read_block(sl->master, &ack, sizeof(ack)); + + mutex_unlock(&sl->master->mutex); + + /* check for acknowledgement */ + if(ack != 0xAA) return -EIO; + + return count; +} + +static ssize_t w1_f1C_show_crccheck(struct device *dev, struct device_attribute *attr, + char *buf) +{ + if(put_user(w1_enable_crccheck + 0x30, buf)) + return -EFAULT; + + return sizeof(w1_enable_crccheck); +} + +static ssize_t w1_f1C_store_crccheck(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + char val; + + if(count != 1 || !buf) return -EINVAL; + + if(get_user(val, buf)) + return -EFAULT; + + /* convert to decimal */ + val = val - 0x30; + if(val != 0 && val != 1) return -EINVAL; + + /* set the new value */ + w1_enable_crccheck = val; + + return sizeof(w1_enable_crccheck); +} + +#define NB_SYSFS_BIN_FILES 2 +static struct bin_attribute w1_f1C_bin_attr[NB_SYSFS_BIN_FILES] = { + { + .attr = { + .name = "eeprom", + .mode = S_IRUGO | S_IWUSR, + }, + .size = W1_EEPROM_SIZE, + .read = w1_f1C_read_bin, + .write = w1_f1C_write_bin, + }, + { + .attr = { + .name = "pio", + .mode = S_IRUGO | S_IWUSR, + }, + .size = 1, + .read = w1_f1C_read_pio, + .write = w1_f1C_write_pio, + } +}; + +static DEVICE_ATTR(crccheck, S_IWUSR | S_IRUGO, w1_f1C_show_crccheck, w1_f1C_store_crccheck); + +static int w1_f1C_add_slave(struct w1_slave *sl) +{ + int err = 0; + int i; + struct w1_f1C_data *data = NULL; + + if(w1_enable_crccheck) { + data = kzalloc(sizeof(struct w1_f1C_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + sl->family_data = data; + } + + /* create binary sysfs attributes */ + for (i = 0; i < NB_SYSFS_BIN_FILES && !err; ++i) + err = sysfs_create_bin_file(&sl->dev.kobj, &(w1_f1C_bin_attr[i])); + + if(err) + goto out; + + /* create device attributes */ + err = device_create_file(&sl->dev, &dev_attr_crccheck); + + if(err) { + /* remove binary sysfs attributes */ + for (i = 0; i < NB_SYSFS_BIN_FILES; ++i) + sysfs_remove_bin_file(&sl->dev.kobj, &(w1_f1C_bin_attr[i])); + } + +out: + if(err) { + if(w1_enable_crccheck) + kfree(data); + } + + return err; +} + +static void w1_f1C_remove_slave(struct w1_slave *sl) +{ + int i; + + if(w1_enable_crccheck) { + kfree(sl->family_data); + sl->family_data = NULL; + } + + /* remove device attributes */ + device_remove_file(&sl->dev, &dev_attr_crccheck); + + /* remove binary sysfs attributes */ + for (i = 0; i < NB_SYSFS_BIN_FILES; ++i) + sysfs_remove_bin_file(&sl->dev.kobj, &(w1_f1C_bin_attr[i])); +} + +static struct w1_family_ops w1_f1C_fops = { + .add_slave = w1_f1C_add_slave, + .remove_slave = w1_f1C_remove_slave, +}; + +static struct w1_family w1_family_1C = { + .fid = W1_FAMILY_DS28E04, + .fops = &w1_f1C_fops, +}; + +static int __init w1_f1C_init(void) +{ + return w1_register_family(&w1_family_1C); +} + +static void __exit w1_f1C_fini(void) +{ + w1_unregister_family(&w1_family_1C); +} + +module_init(w1_f1C_init); +module_exit(w1_f1C_fini); diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h index 874aeb0..b00ada4 100644 --- a/drivers/w1/w1_family.h +++ b/drivers/w1/w1_family.h @@ -30,6 +30,7 @@ #define W1_FAMILY_SMEM_01 0x01 #define W1_FAMILY_SMEM_81 0x81 #define W1_THERM_DS18S20 0x10 +#define W1_FAMILY_DS28E04 0x1C #define W1_COUNTER_DS2423 0x1D #define W1_THERM_DS1822 0x22 #define W1_EEPROM_DS2433 0x23 -- cgit v0.10.2