From 4f48b7fc5ab6286ab4a9522928aa1acc163a4bf3 Mon Sep 17 00:00:00 2001 From: Alan M Butler Date: Mon, 20 Aug 2012 15:29:07 +0100 Subject: ARM: Kirkwood: Iomega ix2-200 DT support Add support for the Iomega ix2-200. Led's and buttons working as of kernel 3.6-rc2 the 3 lines in the network interface do seem to be required as removing either causes the network card to not be able to reach the network (at least on my device). Product page: http://go.iomega.com/en/products/network-storage-desktop/storcenter-network-storage-solution/network-hard-drive-ix2-200-cloud/?partner=4735#tech_specsItem_tab Signed-off-by: Alan M Butler Acked-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts new file mode 100644 index 0000000..865aeec --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -0,0 +1,105 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Iomega StorCenter ix2-200"; + compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + + lm63: lm63@4c { + compatible = "national,lm63"; + reg = <0x4c>; + }; + }; + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "uInitrd"; + reg = <0x540000 0x1000000>; + }; + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + gpio-leds { + compatible = "gpio-leds"; + + power_led { + label = "status:white:power_led"; + gpios = <&gpio0 16 0>; + linux,default-trigger = "default-on"; + }; + health_led1 { + label = "status:red:health_led"; + gpios = <&gpio1 5 0>; + }; + health_led2 { + label = "status:white:health_led"; + gpios = <&gpio1 4 0>; + }; + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 15 0>; + }; + }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + Power { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio0 14 1>; + }; + Reset { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio0 12 1>; + }; + OTB { + label = "OTB Button"; + linux,code = <133>; + gpios = <&gpio1 3 1>; + }; + }; +}; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index ca5c15a..76bc847 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -109,6 +109,13 @@ config MACH_LSXL_DT Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using Flattened Device Tree. +config MACH_IOMEGA_IX2_200_DT + bool "Iomega StorCenter ix2-200 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Iomega StorCenter ix2-200 (Flattened Device Tree). + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 055c85a..f5484dc 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -28,3 +28,4 @@ obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o +obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index a13299d..32fe726 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -12,3 +12,4 @@ dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb +dtb-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += kirkwood-iomega_ix2_200.dtb diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index e4eb450..9b3ec17 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -87,6 +87,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("buffalo,lsxl")) lsxl_init(); + if (of_machine_is_compatible("iom,ix2-200")) + iomega_ix2_200_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -100,6 +103,7 @@ static const char *kirkwood_dt_board_compat[] = { "qnap,ts219", "seagate,goflexnet", "buffalo,lsxl", + "iom,ix2-200", NULL }; diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c new file mode 100644 index 0000000..158fb97 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-kirkwood/board-iomega_ix2_200.c + * + * Iomega StorCenter ix2-200 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static unsigned int iomega_ix2_200_mpp_config[] __initdata = { + MPP12_GPIO, /* Reset Button */ + MPP14_GPIO, /* Power Button */ + MPP15_GPIO, /* Backup LED (blue) */ + MPP16_GPIO, /* Power LED (white) */ + MPP35_GPIO, /* OTB Button */ + MPP36_GPIO, /* Rebuild LED (white) */ + MPP37_GPIO, /* Health LED (red) */ + MPP38_GPIO, /* SATA LED brightness control 1 */ + MPP39_GPIO, /* SATA LED brightness control 2 */ + MPP40_GPIO, /* Backup LED brightness control 1 */ + MPP41_GPIO, /* Backup LED brightness control 2 */ + MPP42_GPIO, /* Power LED brightness control 1 */ + MPP43_GPIO, /* Power LED brightness control 2 */ + MPP44_GPIO, /* Health LED brightness control 1 */ + MPP45_GPIO, /* Health LED brightness control 2 */ + MPP46_GPIO, /* Rebuild LED brightness control 1 */ + MPP47_GPIO, /* Rebuild LED brightness control 2 */ + 0 +}; + +void __init iomega_ix2_200_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(iomega_ix2_200_mpp_config); + + kirkwood_ehci_init(); + + kirkwood_ge01_init(&iomega_ix2_200_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 304dd1a..d5d4064 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -94,6 +94,12 @@ void lsxl_init(void); static inline void lsxl_init(void) {}; #endif +#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT +void iomega_ix2_200_init(void); +#else +static inline void iomega_ix2_200_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); -- cgit v0.10.2 From dd88db78daafb008b8e732dc1224812c93dc228a Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 14 Aug 2012 22:43:41 +0200 Subject: ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar This add a DT compatible board specific setup for the Seagate FreeAgent Dockstar. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 76bc847..d033b7a 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -94,6 +94,13 @@ config MACH_TS219_DT or MV6282. If you have the wrong one, the buttons will not work. +config MACH_DOCKSTAR_DT + bool "Seagate FreeAgent Dockstar (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Seagate FreeAgent Dockstar (Flattened Device Tree). + config MACH_GOFLEXNET_DT bool "Seagate GoFlex Net (Flattened Device Tree)" select ARCH_KIRKWOOD_DT diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index f5484dc..d809cd5 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o +obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c new file mode 100644 index 0000000..6beff21 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-dockstar.c @@ -0,0 +1,61 @@ +/* + * arch/arm/mach-kirkwood/board-dockstar.c + * + * Seagate FreeAgent Dockstar Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Copied and modified for Seagate GoFlex Net support by + * Joshua Coombs based on ArchLinux ARM's + * GoFlex kernel patches. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data dockstar_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int dockstar_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP46_GPIO, /* LED green */ + MPP47_GPIO, /* LED orange */ + 0 +}; + +void __init dockstar_dt_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(dockstar_mpp_config); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + pr_err("can't setup GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&dockstar_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 9b3ec17..30a4caa 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -81,6 +81,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("qnap,ts219")) qnap_dt_ts219_init(); + if (of_machine_is_compatible("seagate,dockstar")) + dockstar_dt_init(); + if (of_machine_is_compatible("seagate,goflexnet")) goflexnet_init(); @@ -101,6 +104,7 @@ static const char *kirkwood_dt_board_compat[] = { "iom,iconnect", "raidsonic,ib-nas62x0", "qnap,ts219", + "seagate,dockstar", "seagate,goflexnet", "buffalo,lsxl", "iom,ix2-200", diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index d5d4064..8f2520f 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -82,6 +82,12 @@ void ib62x0_init(void); static inline void ib62x0_init(void) {}; #endif +#ifdef CONFIG_MACH_DOCKSTAR_DT +void dockstar_dt_init(void); +#else +static inline void dockstar_dt_init(void) {}; +#endif + #ifdef CONFIG_MACH_GOFLEXNET_DT void goflexnet_init(void); #else -- cgit v0.10.2 From 2f865c3548e78232baa3f9b41f516055cf3c4770 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 14 Aug 2012 22:43:42 +0200 Subject: ARM: kirkwood: DT descriptor for Seagate FreeAgent Dockstar This adds the corresponding device tree descriptor for the Seagate FreeAgent Dockstar based on Kirkwood DT. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts new file mode 100644 index 0000000..08a5824 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -0,0 +1,57 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Seagate FreeAgent Dockstar"; + compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "data"; + reg = <0x0500000 0xfb00000>; + }; + }; + }; + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio1 14 1>; + linux,default-trigger = "default-on"; + }; + fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 1>; + }; + }; +}; diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 32fe726..892ce4c 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -13,3 +13,4 @@ dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb dtb-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += kirkwood-iomega_ix2_200.dtb +dtb-$(CONFIG_MACH_DOCKSTAR_DT) += kirkwood-dockstar.dtb -- cgit v0.10.2 From 903234673f1421f5ad9a74bafca427b812f59c93 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Sat, 4 Aug 2012 23:16:44 +0200 Subject: arm: add documentation describing Marvell families of SoC As stated in the introduction of the document, the families of ARM SoCs at Marvell are very complicated, and it is difficult for newcomers to understand the organization of this SoC family and how it relates to the Linux kernel support for those hardware platforms. This document is only at RFC stage for now, it requires reviews and comments from the Marvell maintainers, the PXA maintainers and the MMP maintainers. For correctness of course, but also to add any other information that would be useful. For example, one of the thing that wasn't clear how to detail in the documentation is how the SoCs relate to each other in terms of hardware IP blocks. For example, most of the Kirkwood/Dove/Armada 370-XP/etc. hardware IPs (I2C, SPI, USB, SATA, etc.) are identical, while the PXA and MMP families are completely separate. Signed-off-by: Thomas Petazzoni Cc: Andrew Lunn Cc: Jason Cooper Cc: Gregory Clement Cc: Eric Miao Cc: Russell King Cc: Haojian Zhuang Cc: Nicolas Pitre Cc: Arnd Bergmann Cc: Olof Johansson Cc: Lior Amsalem Cc: Maen Suleiman Cc: Tawfik Bayouk Cc: Shadi Ammouri Cc: Eran Ben-Avi Acked-by: Arnd Bergmann Signed-off-by: Jason Cooper diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README new file mode 100644 index 0000000..8f08a86 --- /dev/null +++ b/Documentation/arm/Marvell/README @@ -0,0 +1,232 @@ +ARM Marvell SoCs +================ + +This document lists all the ARM Marvell SoCs that are currently +supported in mainline by the Linux kernel. As the Marvell families of +SoCs are large and complex, it is hard to understand where the support +for a particular SoC is available in the Linux kernel. This document +tries to help in understanding where those SoCs are supported, and to +match them with their corresponding public datasheet, when available. + +Orion family +------------ + + Flavors: + 88F5082 + 88F5181 + 88F5181L + 88F5182 + Datasheet : http://www.embeddedarm.com/documentation/third-party/MV88F5182-datasheet.pdf + Programmer's User Guide : http://www.embeddedarm.com/documentation/third-party/MV88F5182-opensource-manual.pdf + User Manual : http://www.embeddedarm.com/documentation/third-party/MV88F5182-usermanual.pdf + 88F5281 + Datasheet : http://www.ocmodshop.com/images/reviews/networking/qnap_ts409u/marvel_88f5281_data_sheet.pdf + 88F6183 + Core: Feroceon ARMv5 compatible + Linux kernel mach directory: arch/arm/mach-orion5x + Linux kernel plat directory: arch/arm/plat-orion + +Kirkwood family +--------------- + + Flavors: + 88F6282 a.k.a Armada 300 + Product Brief : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf + 88F6283 a.k.a Armada 310 + Product Brief : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf + 88F6190 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6190-003_WEB.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + 88F6192 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6192-003_ver1.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + 88F6182 + 88F6180 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6180-003_ver1.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + 88F6281 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6281-004_ver1.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + Homepage: http://www.marvell.com/embedded-processors/kirkwood/ + Core: Feroceon ARMv5 compatible + Linux kernel mach directory: arch/arm/mach-kirkwood + Linux kernel plat directory: arch/arm/plat-orion + +Discovery family +---------------- + + Flavors: + MV78100 + Product Brief : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78100-003_WEB.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78100_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf + MV78200 + Product Brief : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78200-002_WEB.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78200_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf + MV76100 + Not supported by the Linux kernel. + + Core: Feroceon ARMv5 compatible + + Linux kernel mach directory: arch/arm/mach-mv78xx0 + Linux kernel plat directory: arch/arm/plat-orion + +EBU Armada family +----------------- + + Armada 370 Flavors: + 88F6710 + 88F6707 + 88F6W11 + + Armada XP Flavors: + MV78230 + MV78260 + MV78460 + + Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf + No public datasheet available. + + Core: Sheeva ARMv7 compatible + + Linux kernel mach directory: arch/arm/mach-mvebu + Linux kernel plat directory: none + +Avanta family +------------- + + Flavors: + 88F6510 + 88F6530P + 88F6550 + 88F6560 + Homepage : http://www.marvell.com/broadband/ + Product Brief: http://www.marvell.com/broadband/assets/Marvell_Avanta_88F6510_305_060-001_product_brief.pdf + No public datasheet available. + + Core: ARMv5 compatible + + Linux kernel mach directory: no code in mainline yet, planned for the future + Linux kernel plat directory: no code in mainline yet, planned for the future + +Dove family (application processor) +----------------------------------- + + Flavors: + 88AP510 a.k.a Armada 510 + Product Brief : http://www.marvell.com/application-processors/armada-500/assets/Marvell_Armada510_SoC.pdf + Hardware Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Hardware-Spec.pdf + Functional Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf + Homepage: http://www.marvell.com/application-processors/armada-500/ + Core: ARMv7 compatible + Directory: arch/arm/mach-dove + +PXA 2xx/3xx/93x/95x family +-------------------------- + + Flavors: + PXA21x, PXA25x, PXA26x + Application processor only + Core: ARMv5 XScale core + PXA270, PXA271, PXA272 + Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_pb.pdf + Design guide : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_design_guide.pdf + Developers manual : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_dev_man.pdf + Specification : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_emts.pdf + Specification update : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf + Application processor only + Core: ARMv5 XScale core + PXA300, PXA310, PXA320 + PXA 300 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA300_PB_R4.pdf + PXA 310 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA310_PB_R4.pdf + PXA 320 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA320_PB_R4.pdf + Design guide : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Design_Guide.pdf + Developers manual : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Developers_Manual.zip + Specifications : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_EMTS.pdf + Specification Update : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Spec_Update.zip + Reference Manual : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_TavorP_BootROM_Ref_Manual.pdf + Application processor only + Core: ARMv5 XScale core + PXA930, PXA935 + Application processor with Communication processor + Core: ARMv5 XScale core + PXA955 + Application processor with Communication processor + Core: ARMv7 compatible Sheeva PJ4 core + + Comments: + + * This line of SoCs originates from the XScale family developed by + Intel and acquired by Marvell in ~2006. The PXA21x, PXA25x, + PXA26x, PXA27x, PXA3xx and PXA93x were developed by Intel, while + the later PXA95x were developed by Marvell. + + * Due to their XScale origin, these SoCs have virtually nothing in + common with the other (Kirkwood, Dove, etc.) families of Marvell + SoCs, except with the MMP/MMP2 family of SoCs. + + Linux kernel mach directory: arch/arm/mach-pxa + Linux kernel plat directory: arch/arm/plat-pxa + +MMP/MMP2 family (communication processor) +----------------------------------------- + + Flavors: + PXA168, a.k.a Armada 168 + Homepage : http://www.marvell.com/application-processors/armada-100/armada-168.jsp + Product brief : http://www.marvell.com/application-processors/armada-100/assets/pxa_168_pb.pdf + Hardware manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_datasheet.pdf + Software manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_software_manual.pdf + Specification update : http://www.marvell.com/application-processors/armada-100/assets/ARMADA16x_Spec_update.pdf + Boot ROM manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_ref_manual.pdf + App node package : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_app_note_package.pdf + Application processor only + Core: ARMv5 compatible Marvell PJ1 (Mohawk) + PXA910 + Homepage : http://www.marvell.com/communication-processors/pxa910/ + Product Brief : http://www.marvell.com/communication-processors/pxa910/assets/Marvell_PXA910_Platform-001_PB_final.pdf + Application processor with Communication processor + Core: ARMv5 compatible Marvell PJ1 (Mohawk) + MMP2, a.k.a Armada 610 + Product Brief : http://www.marvell.com/application-processors/armada-600/assets/armada610_pb.pdf + Application processor only + Core: ARMv7 compatible Sheeva PJ4 core + + Comments: + + * This line of SoCs originates from the XScale family developed by + Intel and acquired by Marvell in ~2006. All the processors of + this MMP/MMP2 family were developed by Marvell. + + * Due to their XScale origin, these SoCs have virtually nothing in + common with the other (Kirkwood, Dove, etc.) families of Marvell + SoCs, except with the PXA family of SoCs listed above. + + Linux kernel mach directory: arch/arm/mach-mmp + Linux kernel plat directory: arch/arm/plat-pxa + +Long-term plans +--------------- + + * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ and + mach-kirkwood/ into the mach-mvebu/ to support all SoCs from the + Marvell EBU (Engineering Business Unit) in a single mach- + directory. The plat-orion/ would therefore disappear. + + * Unify the mach-mmp/ and mach-pxa/ into the same mach-pxa + directory. The plat-pxa/ would therefore disappear. + +Credits +------- + + Maen Suleiman + Lior Amsalem + Thomas Petazzoni + Andrew Lunn + Nicolas Pitre + Eric Miao -- cgit v0.10.2 From 0510c8a014432b45f09509d1fb450922ec96b40d Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Tue, 4 Sep 2012 11:55:02 +0200 Subject: ARM: initial DTS support for km_kirkwood This is a first attempt to support the km_kirkwood reference design with a device tree. This km_kirkwood design is present in many Keymile products. It is based on the Marvell Bobcat SOC which integrates a Kirkwood CPU next to a big L2 Ethernet Switch. The Kirkwood in the SOC is very similar to the "normal" one, but there are a few differences. This initial support is minimal: the kernel can boot with network (ge0), serial port and NAND functional. Signed-off-by: Valentin Longchamp Cc: Holger Brunck Acked-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts new file mode 100644 index 0000000..75bdb93 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -0,0 +1,29 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Keymile Kirkwood Reference Design"; + compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "ok"; + chip-delay = <25>; + }; + }; +}; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index d033b7a..50bca50 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -123,6 +123,13 @@ config MACH_IOMEGA_IX2_200_DT Say 'Y' here if you want your kernel to support the Iomega StorCenter ix2-200 (Flattened Device Tree). +config MACH_KM_KIRKWOOD_DT + bool "Keymile Kirkwood Reference Design (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Keymile Kirkwood Reference Desgin, using Flattened Device Tree. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index d809cd5..294779f 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -30,3 +30,4 @@ obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o +obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 892ce4c..5edef8e 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -14,3 +14,4 @@ dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb dtb-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += kirkwood-iomega_ix2_200.dtb dtb-$(CONFIG_MACH_DOCKSTAR_DT) += kirkwood-dockstar.dtb +dtb-$(CONFIG_MACH_KM_KIRKWOOD_DT) += kirkwood-km_kirkwood.dtb diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 30a4caa..4965546 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -93,6 +93,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("iom,ix2-200")) iomega_ix2_200_init(); + if (of_machine_is_compatible("keymile,km_kirkwood")) + km_kirkwood_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -108,6 +111,7 @@ static const char *kirkwood_dt_board_compat[] = { "seagate,goflexnet", "buffalo,lsxl", "iom,ix2-200", + "keymile,km_kirkwood", NULL }; diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c new file mode 100644 index 0000000..f7d3283 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c @@ -0,0 +1,57 @@ +/* + * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern + * Valentin Longchamp + * + * arch/arm/mach-kirkwood/board-km_kirkwood.c + * + * Keymile km_kirkwood Reference Desing Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int km_kirkwood_mpp_config[] __initdata = { + MPP8_GPIO, /* I2C SDA */ + MPP9_GPIO, /* I2C SCL */ + 0 +}; + +void __init km_kirkwood_init(void) +{ + struct clk *sata_clk; + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(km_kirkwood_mpp_config); + + /* + * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing + * SATA bits (14-15) of the Clock Gating Control Register. Since these + * devices are also not present in this variant, their clocks get + * disabled because unused when clk_disable_unused() gets called. + * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED + */ + sata_clk = clk_get_sys("sata_mv.0", "0"); + if (!IS_ERR(sata_clk)) + sata_clk->flags |= CLK_IGNORE_UNUSED; + sata_clk = clk_get_sys("sata_mv.0", "1"); + if (!IS_ERR(sata_clk)) + sata_clk->flags |= CLK_IGNORE_UNUSED; + + kirkwood_ehci_init(); + kirkwood_ge00_init(&km_kirkwood_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 8f2520f..bcffd7c 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -106,6 +106,12 @@ void iomega_ix2_200_init(void); static inline void iomega_ix2_200_init(void) {}; #endif +#ifdef CONFIG_MACH_KM_KIRKWOOD_DT +void km_kirkwood_init(void); +#else +static inline void km_kirkwood_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); -- cgit v0.10.2 From 5817d10b8b8a6003bfb7551d0c3feb92deb74ed2 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 15 Aug 2012 19:07:30 +0200 Subject: ARM: dove: unify clock setup This patch synchronizes the clock setup of dove with other orion-based platforms. In dove_find_tclk there was a note about DOVE_SAMPLE_HI/LO register to detect tclk. While it might be possible to set a different tclk frequency with reset strapping the Dove datasheets don't tell anything about tclk frequency here. Therefore, I removed that comment. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 6321567..8629e30 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -33,8 +33,6 @@ #include #include "common.h" -static int get_tclk(void); - /***************************************************************************** * I/O Address Mapping ****************************************************************************/ @@ -70,12 +68,13 @@ void __init dove_map_io(void) /***************************************************************************** * CLK tree ****************************************************************************/ +static int dove_tclk; static struct clk *tclk; -static void __init clk_init(void) +static void __init dove_clk_init(void) { tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT, - get_tclk()); + dove_tclk); orion_clkdev_init(tclk); } @@ -188,16 +187,16 @@ void __init dove_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); } -static int get_tclk(void) +static int __init dove_find_tclk(void) { - /* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */ return 166666667; } static void __init dove_timer_init(void) { + dove_tclk = dove_find_tclk(); orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, - IRQ_DOVE_BRIDGE, get_tclk()); + IRQ_DOVE_BRIDGE, dove_tclk); } struct sys_timer dove_timer = { @@ -285,8 +284,8 @@ void __init dove_sdio1_init(void) void __init dove_init(void) { - printk(KERN_INFO "Dove 88AP510 SoC, "); - printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); + pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", + (dove_tclk + 499999) / 1000000); #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(); @@ -294,7 +293,7 @@ void __init dove_init(void) dove_setup_cpu_mbus(); /* Setup root of clk tree */ - clk_init(); + dove_clk_init(); /* internal devices that every board has */ dove_rtc_init(); -- cgit v0.10.2 From 521674718af0f20fada7311a74c3f8fe23767d55 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 15 Aug 2012 19:07:31 +0200 Subject: ARM: dove: add clock gating control This patch adds clock gates from the clock gating control register available on dove. All clock gates are hooked up to tclk, except for gigabit ethernet controller (ge) which is a child of gephy to allow both enabled/disabled at the same time. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 8629e30..38e2cc3 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -69,14 +70,68 @@ void __init dove_map_io(void) * CLK tree ****************************************************************************/ static int dove_tclk; + +static DEFINE_SPINLOCK(gating_lock); static struct clk *tclk; +static struct clk __init *dove_register_gate(const char *name, + const char *parent, u8 bit_idx) +{ + return clk_register_gate(NULL, name, parent, 0, + (void __iomem *)CLOCK_GATING_CONTROL, + bit_idx, 0, &gating_lock); +} + static void __init dove_clk_init(void) { + struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1; + struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma; + struct clk *xor0, *xor1, *ge, *gephy; + tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT, dove_tclk); - orion_clkdev_init(tclk); + usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0); + usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1); + sata = dove_register_gate("sata", "tclk", CLOCK_GATING_BIT_SATA); + pex0 = dove_register_gate("pex0", "tclk", CLOCK_GATING_BIT_PCIE0); + pex1 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE1); + sdio0 = dove_register_gate("sdio0", "tclk", CLOCK_GATING_BIT_SDIO0); + sdio1 = dove_register_gate("sdio1", "tclk", CLOCK_GATING_BIT_SDIO1); + nand = dove_register_gate("nand", "tclk", CLOCK_GATING_BIT_NAND); + camera = dove_register_gate("camera", "tclk", CLOCK_GATING_BIT_CAMERA); + i2s0 = dove_register_gate("i2s0", "tclk", CLOCK_GATING_BIT_I2S0); + i2s1 = dove_register_gate("i2s1", "tclk", CLOCK_GATING_BIT_I2S1); + crypto = dove_register_gate("crypto", "tclk", CLOCK_GATING_BIT_CRYPTO); + ac97 = dove_register_gate("ac97", "tclk", CLOCK_GATING_BIT_AC97); + pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA); + xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0); + xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1); + gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY); + ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE); + + orion_clkdev_add(NULL, "orion_spi.0", tclk); + orion_clkdev_add(NULL, "orion_spi.1", tclk); + orion_clkdev_add(NULL, "orion_wdt", tclk); + orion_clkdev_add(NULL, "mv64xxx_i2c.0", tclk); + + orion_clkdev_add(NULL, "orion-ehci.0", usb0); + orion_clkdev_add(NULL, "orion-ehci.1", usb1); + orion_clkdev_add(NULL, "mv643xx_eth.0", ge); + orion_clkdev_add("0", "sata_mv.0", sata); + orion_clkdev_add("0", "pcie", pex0); + orion_clkdev_add("1", "pcie", pex1); + orion_clkdev_add(NULL, "sdhci-dove.0", sdio0); + orion_clkdev_add(NULL, "sdhci-dove.1", sdio1); + orion_clkdev_add(NULL, "orion_nand", nand); + orion_clkdev_add(NULL, "cafe1000-ccic.0", camera); + orion_clkdev_add(NULL, "kirkwood-i2s.0", i2s0); + orion_clkdev_add(NULL, "kirkwood-i2s.1", i2s1); + orion_clkdev_add(NULL, "mv_crypto", crypto); + orion_clkdev_add(NULL, "dove-ac97", ac97); + orion_clkdev_add(NULL, "dove-pdma", pdma); + orion_clkdev_add(NULL, "mv_xor_shared.0", xor0); + orion_clkdev_add(NULL, "mv_xor_shared.1", xor1); } /***************************************************************************** diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h index 3ad9f94..7bcd0df 100644 --- a/arch/arm/mach-dove/include/mach/pm.h +++ b/arch/arm/mach-dove/include/mach/pm.h @@ -13,24 +13,42 @@ #include #define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38) -#define CLOCK_GATING_USB0_MASK (1 << 0) -#define CLOCK_GATING_USB1_MASK (1 << 1) -#define CLOCK_GATING_GBE_MASK (1 << 2) -#define CLOCK_GATING_SATA_MASK (1 << 3) -#define CLOCK_GATING_PCIE0_MASK (1 << 4) -#define CLOCK_GATING_PCIE1_MASK (1 << 5) -#define CLOCK_GATING_SDIO0_MASK (1 << 8) -#define CLOCK_GATING_SDIO1_MASK (1 << 9) -#define CLOCK_GATING_NAND_MASK (1 << 10) -#define CLOCK_GATING_CAMERA_MASK (1 << 11) -#define CLOCK_GATING_I2S0_MASK (1 << 12) -#define CLOCK_GATING_I2S1_MASK (1 << 13) -#define CLOCK_GATING_CRYPTO_MASK (1 << 15) -#define CLOCK_GATING_AC97_MASK (1 << 21) -#define CLOCK_GATING_PDMA_MASK (1 << 22) -#define CLOCK_GATING_XOR0_MASK (1 << 23) -#define CLOCK_GATING_XOR1_MASK (1 << 24) -#define CLOCK_GATING_GIGA_PHY_MASK (1 << 30) +#define CLOCK_GATING_BIT_USB0 0 +#define CLOCK_GATING_BIT_USB1 1 +#define CLOCK_GATING_BIT_GBE 2 +#define CLOCK_GATING_BIT_SATA 3 +#define CLOCK_GATING_BIT_PCIE0 4 +#define CLOCK_GATING_BIT_PCIE1 5 +#define CLOCK_GATING_BIT_SDIO0 8 +#define CLOCK_GATING_BIT_SDIO1 9 +#define CLOCK_GATING_BIT_NAND 10 +#define CLOCK_GATING_BIT_CAMERA 11 +#define CLOCK_GATING_BIT_I2S0 12 +#define CLOCK_GATING_BIT_I2S1 13 +#define CLOCK_GATING_BIT_CRYPTO 15 +#define CLOCK_GATING_BIT_AC97 21 +#define CLOCK_GATING_BIT_PDMA 22 +#define CLOCK_GATING_BIT_XOR0 23 +#define CLOCK_GATING_BIT_XOR1 24 +#define CLOCK_GATING_BIT_GIGA_PHY 30 +#define CLOCK_GATING_USB0_MASK (1 << CLOCK_GATING_BIT_USB0) +#define CLOCK_GATING_USB1_MASK (1 << CLOCK_GATING_BIT_USB1) +#define CLOCK_GATING_GBE_MASK (1 << CLOCK_GATING_BIT_GBE) +#define CLOCK_GATING_SATA_MASK (1 << CLOCK_GATING_BIT_SATA) +#define CLOCK_GATING_PCIE0_MASK (1 << CLOCK_GATING_BIT_PCIE0) +#define CLOCK_GATING_PCIE1_MASK (1 << CLOCK_GATING_BIT_PCIE1) +#define CLOCK_GATING_SDIO0_MASK (1 << CLOCK_GATING_BIT_SDIO0) +#define CLOCK_GATING_SDIO1_MASK (1 << CLOCK_GATING_BIT_SDIO1) +#define CLOCK_GATING_NAND_MASK (1 << CLOCK_GATING_BIT_NAND) +#define CLOCK_GATING_CAMERA_MASK (1 << CLOCK_GATING_BIT_CAMERA) +#define CLOCK_GATING_I2S0_MASK (1 << CLOCK_GATING_BIT_I2S0) +#define CLOCK_GATING_I2S1_MASK (1 << CLOCK_GATING_BIT_I2S1) +#define CLOCK_GATING_CRYPTO_MASK (1 << CLOCK_GATING_BIT_CRYPTO) +#define CLOCK_GATING_AC97_MASK (1 << CLOCK_GATING_BIT_AC97) +#define CLOCK_GATING_PDMA_MASK (1 << CLOCK_GATING_BIT_PDMA) +#define CLOCK_GATING_XOR0_MASK (1 << CLOCK_GATING_BIT_XOR0) +#define CLOCK_GATING_XOR1_MASK (1 << CLOCK_GATING_BIT_XOR1) +#define CLOCK_GATING_GIGA_PHY_MASK (1 << CLOCK_GATING_BIT_GIGA_PHY) #define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50) #define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54) -- cgit v0.10.2 From 624d0b52758d312ce1339bc88d23e6ef7ba980ee Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 15 Aug 2012 19:07:32 +0200 Subject: ARM: dove: add crypto engine This patch adds a dove specific setup function for the Marvell CESA crypto engine available on orion based SoCs. Dove setup was just missing a function to call orion_crypto_init with dove specific setup. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 38e2cc3..d5de814 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -259,6 +259,15 @@ struct sys_timer dove_timer = { }; /***************************************************************************** + * Cryptographic Engines and Security Accelerator (CESA) + ****************************************************************************/ +void __init dove_crypto_init(void) +{ + orion_crypto_init(DOVE_CRYPT_PHYS_BASE, DOVE_CESA_PHYS_BASE, + DOVE_CESA_SIZE, IRQ_DOVE_CRYPTO); +} + +/***************************************************************************** * XOR 0 ****************************************************************************/ void __init dove_xor0_init(void) -- cgit v0.10.2 From 81d2ef7c40eceb7189872ecea5964f2041118d4a Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 15 Aug 2012 19:07:33 +0200 Subject: ARM: dove: add device tree based machine descriptor This adds a generic DT_MACHINE for mach-dove. As with other orion based SoCs there still is some glue code required to make all internal devices work, i.e. auxdata is provided to pass clocks to corresponding device drivers. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index dd937c5..00154e7 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -15,6 +15,13 @@ config MACH_CM_A510 Say 'Y' here if you want your kernel to support the CompuLab CM-A510 Board. +config MACH_DOVE_DT + bool "Marvell Dove Flattened Device Tree" + select USE_OF + help + Say 'Y' here if you want your kernel to support the + Marvell Dove using flattened device tree. + endmenu endif diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index d5de814..b12d11a 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include #include #include @@ -29,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -380,3 +383,67 @@ void dove_restart(char mode, const char *cmd) while (1) ; } + +#if defined(CONFIG_MACH_DOVE_DT) +/* + * Auxdata required until real OF clock provider + */ +struct of_dev_auxdata dove_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL), + OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), + OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL), + OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL), + OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL), + {}, +}; + +static struct mv643xx_eth_platform_data dove_dt_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, +}; + +static void __init dove_dt_init(void) +{ + pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", + (dove_tclk + 499999) / 1000000); + +#ifdef CONFIG_CACHE_TAUROS2 + tauros2_init(); +#endif + dove_setup_cpu_mbus(); + + /* Setup root of clk tree */ + dove_clk_init(); + + /* Internal devices not ported to DT yet */ + dove_rtc_init(); + dove_xor0_init(); + dove_xor1_init(); + + dove_ge00_init(&dove_dt_ge00_data); + dove_ehci0_init(); + dove_ehci1_init(); + dove_pcie_init(1, 1); + dove_crypto_init(); + + of_platform_populate(NULL, of_default_bus_match_table, + dove_auxdata_lookup, NULL); +} + +static const char * const dove_dt_board_compat[] = { + "marvell,dove", + NULL +}; + +DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") + .map_io = dove_map_io, + .init_early = dove_init_early, + .init_irq = orion_dt_init_irq, + .timer = &dove_timer, + .init_machine = dove_dt_init, + .restart = dove_restart, + .dt_compat = dove_dt_board_compat, +MACHINE_END +#endif -- cgit v0.10.2 From 80a8b54b9a0ba418f25d2014b1375f9f4876eb15 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 15 Aug 2012 19:07:34 +0200 Subject: ARM: dove: add device tree descriptors This patch adds device tree decriptors for dove SoC and currently supported boards. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts new file mode 100644 index 0000000..61a8062 --- /dev/null +++ b/arch/arm/boot/dts/dove-cm-a510.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "Compulab CM-A510"; + compatible = "compulab,cm-a510", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; +}; + +&uart0 { status = "okay"; }; +&uart1 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sdio1 { status = "okay"; }; +&sata0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts new file mode 100644 index 0000000..e5a920b --- /dev/null +++ b/arch/arm/boot/dts/dove-dove-db.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "Marvell DB-MV88AP510-BP Development Board"; + compatible = "marvell,dove-db", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; +}; + +&uart0 { status = "okay"; }; +&uart1 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sdio1 { status = "okay"; }; +&sata0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash ST-M25P32-VMF6P */ + spi-flash@0 { + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi new file mode 100644 index 0000000..96fb824 --- /dev/null +++ b/arch/arm/boot/dts/dove.dtsi @@ -0,0 +1,143 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "marvell,dove"; + model = "Marvell Armada 88AP510 SoC"; + + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>, + <0xf1020214 0x04>; + }; + + mbus@f1000000 { + compatible = "simple-bus"; + ranges = <0 0xf1000000 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <7>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <8>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <9>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <10>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + wdt: wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + }; + + gpio0: gpio@d0400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0400 0x20>; + ngpio = <32>; + interrupts = <12>, <13>, <14>, <60>; + }; + + gpio1: gpio@d0420 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0420 0x20>; + ngpio = <32>; + interrupts = <61>; + }; + + gpio2: gpio@e8400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xe8400 0x0c>; + ngpio = <8>; + }; + + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <6>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + spi1: spi@14600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <5>; + reg = <0x14600 0x28>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clock-frequency = <400000>; + timeout-ms = <1000>; + status = "disabled"; + }; + + sdio0: sdio@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>, <37>; + status = "disabled"; + }; + + sdio1: sdio@90000 { + compatible = "marvell,dove-sdhci"; + reg = <0x90000 0x100>; + interrupts = <36>, <38>; + status = "disabled"; + }; + + sata0: sata@a0000 { + compatible = "marvell,orion-sata"; + reg = <0xa0000 0x2400>; + interrupts = <62>; + nr-ports = <1>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot index 760a0ef..94ab6b3 100644 --- a/arch/arm/mach-dove/Makefile.boot +++ b/arch/arm/mach-dove/Makefile.boot @@ -1,3 +1,6 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_MACH_DOVE_DT) += dove-dove-db.dtb +dtb-$(CONFIG_MACH_DOVE_DT) += dove-cm-a510.dtb -- cgit v0.10.2 From 1f5e6c639e25de9f059ea0e0181a5baeb3b3f4bf Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 15 Aug 2012 19:07:35 +0200 Subject: ARM: dove: SolidRun CuBox DT This patch adds basic support for the SolidRun CuBox to DT based mach-dove. There are still some issues related to ongoing orion/mvebu development, e.g. gpio-led will not work as there is no DT pinctrl for dove yet and we don't have board specific setup code. Nevertheless, the DT description is already introduced here. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts new file mode 100644 index 0000000..0adbd5a --- /dev/null +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -0,0 +1,42 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "SolidRun CuBox"; + compatible = "solidrun,cubox", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpio0 18 1>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&uart0 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sata0 { status = "okay"; }; +&i2c0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot index 94ab6b3..cfac9c5 100644 --- a/arch/arm/mach-dove/Makefile.boot +++ b/arch/arm/mach-dove/Makefile.boot @@ -4,3 +4,4 @@ initrd_phys-y := 0x00800000 dtb-$(CONFIG_MACH_DOVE_DT) += dove-dove-db.dtb dtb-$(CONFIG_MACH_DOVE_DT) += dove-cm-a510.dtb +dtb-$(CONFIG_MACH_DOVE_DT) += dove-cubox.dtb -- cgit v0.10.2 From 0f81bd438bed6af47a01a97d5ecbb23a7e478de6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 9 Sep 2012 20:34:13 +0100 Subject: ARM: Dove: allow PCI to be disabled Allow PCI support for Dove to be disabled. Some platforms do not have anything connected to the PCIe ports, so requiring PCI support to be built into the kernel just wastes space, and presents a lot more config options than are necessary. However, select USB_ARCH_HAS_EHCI so that we can still have EHCI support. Signed-off-by: Russell King Signed-off-by: Jason Cooper diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2f88d8d..95041b9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -573,11 +573,12 @@ config ARCH_MVEBU config ARCH_DOVE bool "Marvell Dove" select CPU_V7 - select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_PCI select NEED_MACH_IO_H select PLAT_ORION + select USB_ARCH_HAS_EHCI help Support for the Marvell Dove SoC 88AP510 diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index fa0f018..5e683ba 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -1,4 +1,4 @@ -obj-y += common.o addr-map.o irq.o pcie.o mpp.o - +obj-y += common.o addr-map.o irq.o mpp.o +obj-$(CONFIG_PCI) += pcie.o obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o obj-$(CONFIG_MACH_CM_A510) += cm-a510.o diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h index 6432a3b..1a23340 100644 --- a/arch/arm/mach-dove/common.h +++ b/arch/arm/mach-dove/common.h @@ -26,7 +26,11 @@ void dove_init_irq(void); void dove_setup_cpu_mbus(void); void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data); void dove_sata_init(struct mv_sata_platform_data *sata_data); +#ifdef CONFIG_PCI void dove_pcie_init(int init_port0, int init_port1); +#else +static inline void dove_pcie_init(int init_port0, int init_port1) { } +#endif void dove_ehci0_init(void); void dove_ehci1_init(void); void dove_uart0_init(void); -- cgit v0.10.2 From 73b39d4b443857c2155c7269bb593748f48d4852 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:14 +0200 Subject: arm: mach-dove: use plus instead of or for address definitions Since we are going to use IOMEM() to define many base virtual addresses, we can no longer use binary or to define the individual register addresses ("binary or" arithmetic on pointers is not allowed). Instead, use the more conventional plus operator to do so. The binary or operators were actually not useful because the low-order bits of the base address were always zero, so the usage of the binary or operators was effectively identical to a plus operator. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h index f953bb5..99f259e 100644 --- a/arch/arm/mach-dove/include/mach/bridge-regs.h +++ b/arch/arm/mach-dove/include/mach/bridge-regs.h @@ -13,22 +13,22 @@ #include -#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000) +#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0000) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) #define CPU_CTRL_PCIE0_LINK 0x00000001 #define CPU_RESET 0x00000002 #define CPU_CTRL_PCIE1_LINK 0x00000008 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) #define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) #define SOFT_RESET 0x00000001 #define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) #define IRQ_CAUSE_LOW_OFF 0x0000 #define IRQ_MASK_LOW_OFF 0x0004 #define FIQ_MASK_LOW_OFF 0x0008 @@ -47,9 +47,9 @@ #define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF) #define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF) -#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c) +#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE + 0x011c) -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) #endif diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index d52b0ef..cccfd1d 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -64,75 +64,75 @@ */ /* SPI, I2C, UART */ -#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000) -#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000) -#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000) -#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100) -#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100) -#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200) -#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200) -#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300) -#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300) -#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600) -#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600) +#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x11000) +#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12000) +#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12000) +#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12100) +#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12100) +#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12200) +#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12200) +#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12300) +#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12300) +#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x10600) +#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x14600) /* North-South Bridge */ -#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000) +#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x20000) +#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x20000) /* Cryptographic Engine */ -#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000) +#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x30000) /* PCIe 0 */ -#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000) +#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x40000) /* USB */ -#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000) -#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000) +#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x50000) +#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x51000) /* XOR 0 Engine */ -#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800) -#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800) -#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00) -#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00) +#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60800) +#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60800) +#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60A00) +#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60A00) /* XOR 1 Engine */ -#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900) -#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900) -#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00) -#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00) +#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60900) +#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60900) +#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60B00) +#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60B00) /* Gigabit Ethernet */ -#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000) +#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x70000) /* PCIe 1 */ -#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000) +#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x80000) /* CAFE */ -#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000) -#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000) -#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000) -#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000) +#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x92000) +#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x90000) +#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x94000) +#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x98000) /* SATA */ -#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000) +#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xa0000) /* I2S/SPDIF */ -#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000) -#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000) +#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb0000) +#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb4000) /* NAND Flash Controller */ -#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000) +#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xc0000) /* MPP, GPIO, Reset Sampling */ -#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200) +#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0200) #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10) -#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014) -#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018) -#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400) -#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0420) -#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe8400) -#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c) +#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE + 0x014) +#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE + 0x018) +#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0400) +#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0420) +#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe8400) +#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe803c) #define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1) #define DOVE_NAND_GPIO_EN (1 << 0) #define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40) @@ -144,44 +144,44 @@ #define DOVE_SD0_GPIO_SEL (1 << 0) /* Power Management */ -#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000) +#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0000) #define DOVE_PMU_SIG_CTRL (DOVE_PMU_VIRT_BASE + 0x802c) /* Real Time Clock */ -#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500) +#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xd8500) /* AC97 */ -#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000) -#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000) +#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe0000) +#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe0000) /* Peripheral DMA */ -#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000) -#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000) +#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe4000) +#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe4000) -#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C) +#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE + 0xe802C) #define DOVE_TWSI_ENABLE_OPTION1 (1 << 7) -#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030) +#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE + 0xe8030) #define DOVE_TWSI_ENABLE_OPTION2 (1 << 20) #define DOVE_TWSI_ENABLE_OPTION3 (1 << 21) #define DOVE_TWSI_OPTION3_GPIO (1 << 22) -#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000) -#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034) +#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xec000) +#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE + 0xe8034) #define DOVE_SSP_ON_AU1 (1 << 0) #define DOVE_SSP_CLOCK_ENABLE (1 << 1) #define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11) /* Memory Controller */ -#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000) +#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE + 0x00000) /* LCD Controller */ -#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000) -#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000) -#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000) -#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000) +#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000) +#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x20000) +#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000) +#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x30000) /* Graphic Engine */ -#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000) +#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x40000) /* Video Engine */ -#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000) +#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x400000) #endif -- cgit v0.10.2 From 40306c8bc0dbef623fa02815929dace1c75046e2 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:15 +0200 Subject: arm: mach-kirkwood: use plus instead of or for address definitions Since we are going to use IOMEM() to define many base virtual addresses, we can no longer use binary or to define the individual register addresses ("binary or" arithmetic on pointers is not allowed). Instead, use the more conventional plus operator to do so. The binary or operators were actually not useful because the low-order bits of the base address were always zero, so the usage of the binary or operators was effectively identical to a plus operator. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index a115142..5c82b7d 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -13,37 +13,37 @@ #include -#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0100) +#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100) #define CPU_CONFIG_ERROR_PROP 0x00000004 -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) #define CPU_RESET 0x00000002 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) #define WDT_RESET_OUT_EN 0x00000002 #define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) #define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110) #define WDT_INT_REQ 0x0008 #define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) #define IRQ_CAUSE_LOW_OFF 0x0000 #define IRQ_MASK_LOW_OFF 0x0004 #define IRQ_CAUSE_HIGH_OFF 0x0010 #define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) -#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) +#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128) #define L2_WRITETHROUGH 0x00000010 -#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c) +#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c) #define CGC_BIT_GE0 (0) #define CGC_BIT_PEX0 (2) #define CGC_BIT_USB0 (3) diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index c5b6851..9695592 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -61,61 +61,61 @@ /* * Register Map */ -#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) -#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500) -#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418) - -#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) -#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030) -#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034) -#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100) -#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0140) -#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300) -#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600) -#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) - -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000) - -#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) - -#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) -#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70) -#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04) -#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x44000) -#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE | 0x70) -#define PCIE1_STATUS (PCIE1_VIRT_BASE | 0x1a04) - -#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) - -#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60800) -#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60800) -#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60900) -#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60900) -#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60A00) -#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60A00) -#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60B00) -#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60B00) - -#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000) -#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000) - -#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000) -#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000) -#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050) -#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330) -#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050) -#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330) - -#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) - -#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0xA0000) -#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0xA0000) +#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000) +#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500) +#define DDR_OPERATION_BASE (DDR_VIRT_BASE + 0x1418) + +#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000) +#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000) +#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030) +#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034) +#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100) +#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140) +#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300) +#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600) +#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000) +#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000) +#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000) +#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100) +#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100) + +#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) + +#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000) + +#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000) +#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70) +#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04) +#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000) +#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70) +#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04) + +#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000) + +#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800) +#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800) +#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900) +#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900) +#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00) +#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00) +#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00) +#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00) + +#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000) +#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000) + +#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000) +#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000) +#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050) +#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330) +#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050) +#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330) + +#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000) + +#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000) +#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000) /* * Supported devices and revisions. -- cgit v0.10.2 From 5ae9f5dbb3376c14201f8354d857485ff3ea14af Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:16 +0200 Subject: arm: mach-mv78xx0: use plus instead of or for address definitions Since we are going to use IOMEM() to define many base virtual addresses, we can no longer use binary or to define the individual register addresses ("binary or" arithmetic on pointers is not allowed). Instead, use the more conventional plus operator to do so. The binary or operators were actually not useful because the low-order bits of the base address were always zero, so the usage of the binary or operators was effectively identical to a plus operator. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h index eb187e0..5f03484 100644 --- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h +++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h @@ -11,18 +11,18 @@ #include -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) #define L2_WRITETHROUGH 0x00020000 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) #define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) #define SOFT_RESET 0x00000001 #define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) #define IRQ_CAUSE_ERR_OFF 0x0000 #define IRQ_CAUSE_LOW_OFF 0x0004 #define IRQ_CAUSE_HIGH_OFF 0x0008 @@ -30,7 +30,7 @@ #define IRQ_MASK_LOW_OFF 0x0010 #define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index e807c4c..a86e79e 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -65,47 +65,47 @@ /* * Register Map */ -#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000) -#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500) -#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1570) - -#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000) -#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030) -#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034) -#define GPIO_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100) -#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) -#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1100) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) -#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2200) -#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2200) -#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2300) -#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2300) - -#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x30000) -#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x34000) - -#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x40000) -#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x44000) -#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x48000) -#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x4c000) - -#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x50000) -#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x51000) -#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x52000) - -#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x70000) -#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x74000) - -#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x80000) -#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x84000) -#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x88000) -#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x8c000) - -#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000) +#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x00000) +#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE + 0x1500) +#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE + 0x1570) + +#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x10000) +#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x10000) +#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE + 0x0030) +#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE + 0x0034) +#define GPIO_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100) +#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000) +#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1100) +#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000) +#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000) +#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100) +#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100) +#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2200) +#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2200) +#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2300) +#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2300) + +#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x30000) +#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x34000) + +#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x40000) +#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x44000) +#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x48000) +#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x4c000) + +#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x50000) +#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x51000) +#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x52000) + +#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x70000) +#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x74000) + +#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x80000) +#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x84000) +#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x88000) +#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x8c000) + +#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0xa0000) /* * Supported devices and revisions. -- cgit v0.10.2 From 2332656aec7ae88248cbd9aa6b35c857bb449c94 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:17 +0200 Subject: arm: mach-orion5x: use plus instead of or for address definitions Since we are going to use IOMEM() to define many base virtual addresses, we can no longer use binary or to define the individual register addresses ("binary or" arithmetic on pointers is not allowed). Instead, use the more conventional plus operator to do so. The binary or operators were actually not useful because the low-order bits of the base address were always zero, so the usage of the binary or operators was effectively identical to a plus operator. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h index 11a3c1e..461fd69 100644 --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -13,27 +13,27 @@ #include -#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100) +#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE + 0x100) -#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104) +#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE + 0x104) -#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) +#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x108) #define WDT_RESET_OUT_EN 0x0002 -#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c) +#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE + 0x10c) -#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110) +#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x110) -#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C) +#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE + 0x11C) #define WDT_INT_REQ 0x0008 #define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200) +#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x200) -#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) +#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x204) -#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) -#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300) +#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE + 0x300) +#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE + 0x300) #endif diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 683e085..87bd378 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -68,42 +68,42 @@ * Orion Registers Map ******************************************************************************/ -#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) -#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE | 0x1500) -#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) -#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) -#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x)) +#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x00000) +#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE + 0x1500) +#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x10000) +#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x10000) +#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE + (x)) #define GPIO_VIRT_BASE ORION5X_DEV_BUS_REG(0x0100) -#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x0600) -#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000) -#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) +#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x0600) +#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x1000) +#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x2000) +#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE + 0x2000) +#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x2100) +#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE + 0x2100) -#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) -#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000) +#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x20000) +#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x20000) -#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) +#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x30000) -#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000) +#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x40000) -#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000) -#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) +#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x50000) +#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x50000) -#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900) -#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900) +#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x60900) +#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x60900) -#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) -#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) +#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x70000) +#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x70000) -#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) -#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) +#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x80000) +#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x80000) -#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x90000) +#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x90000) -#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) -#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) +#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0xa0000) +#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0xa0000) /******************************************************************************* * Device Bus Registers diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index cb19e16..b36f928 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -198,7 +198,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) /***************************************************************************** * PCI controller ****************************************************************************/ -#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) +#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE + (x)) #define PCI_MODE ORION5X_PCI_REG(0xd00) #define PCI_CMD ORION5X_PCI_REG(0xc00) #define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14) -- cgit v0.10.2 From c3c5a2815d0b7ebde157556685a0ef8ffa34b98c Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:18 +0200 Subject: arm: mach-dove: use IOMEM() for base address definitions We now define all virtual base address constants using IOMEM() so that those are naturally typed as void __iomem pointers, and we do the necessary adjustements in the mach-dove code. Note that we introduce a few temporary additional "unsigned long" casts when calling into plat-orion functions. Those are removed by followup patches converting plat-orion functions to void __iomem pointers as well. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c index 2a06c01..b92c9c7 100644 --- a/arch/arm/mach-dove/addr-map.c +++ b/arch/arm/mach-dove/addr-map.c @@ -47,7 +47,7 @@ static inline void __iomem *ddr_map_sc(int i) static struct __initdata orion_addr_map_cfg addr_map_cfg = { .num_wins = 8, .remappable_wins = 4, - .bridge_virt_base = BRIDGE_VIRT_BASE, + .bridge_virt_base = (unsigned long) BRIDGE_VIRT_BASE, }; static const struct __initdata orion_addr_map_info addr_map_info[] = { diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 6321567..533fd81 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -40,22 +40,22 @@ static int get_tclk(void); ****************************************************************************/ static struct map_desc dove_io_desc[] __initdata = { { - .virtual = DOVE_SB_REGS_VIRT_BASE, + .virtual = (unsigned long) DOVE_SB_REGS_VIRT_BASE, .pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE), .length = DOVE_SB_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = DOVE_NB_REGS_VIRT_BASE, + .virtual = (unsigned long) DOVE_NB_REGS_VIRT_BASE, .pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE), .length = DOVE_NB_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = DOVE_PCIE0_IO_VIRT_BASE, + .virtual = (unsigned long) DOVE_PCIE0_IO_VIRT_BASE, .pfn = __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE), .length = DOVE_PCIE0_IO_SIZE, .type = MT_DEVICE, }, { - .virtual = DOVE_PCIE1_IO_VIRT_BASE, + .virtual = (unsigned long) DOVE_PCIE1_IO_VIRT_BASE, .pfn = __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE), .length = DOVE_PCIE1_IO_SIZE, .type = MT_DEVICE, @@ -128,7 +128,8 @@ void __init dove_sata_init(struct mv_sata_platform_data *sata_data) ****************************************************************************/ void __init dove_uart0_init(void) { - orion_uart0_init(DOVE_UART0_VIRT_BASE, DOVE_UART0_PHYS_BASE, + orion_uart0_init((unsigned long) DOVE_UART0_VIRT_BASE, + DOVE_UART0_PHYS_BASE, IRQ_DOVE_UART_0, tclk); } @@ -137,7 +138,8 @@ void __init dove_uart0_init(void) ****************************************************************************/ void __init dove_uart1_init(void) { - orion_uart1_init(DOVE_UART1_VIRT_BASE, DOVE_UART1_PHYS_BASE, + orion_uart1_init((unsigned long) DOVE_UART1_VIRT_BASE, + DOVE_UART1_PHYS_BASE, IRQ_DOVE_UART_1, tclk); } @@ -146,7 +148,8 @@ void __init dove_uart1_init(void) ****************************************************************************/ void __init dove_uart2_init(void) { - orion_uart2_init(DOVE_UART2_VIRT_BASE, DOVE_UART2_PHYS_BASE, + orion_uart2_init((unsigned long) DOVE_UART2_VIRT_BASE, + DOVE_UART2_PHYS_BASE, IRQ_DOVE_UART_2, tclk); } @@ -155,7 +158,8 @@ void __init dove_uart2_init(void) ****************************************************************************/ void __init dove_uart3_init(void) { - orion_uart3_init(DOVE_UART3_VIRT_BASE, DOVE_UART3_PHYS_BASE, + orion_uart3_init((unsigned long) DOVE_UART3_VIRT_BASE, + DOVE_UART3_PHYS_BASE, IRQ_DOVE_UART_3, tclk); } @@ -185,7 +189,7 @@ void __init dove_i2c_init(void) ****************************************************************************/ void __init dove_init_early(void) { - orion_time_set_base(TIMER_VIRT_BASE); + orion_time_set_base((unsigned long) TIMER_VIRT_BASE); } static int get_tclk(void) @@ -196,7 +200,8 @@ static int get_tclk(void) static void __init dove_timer_init(void) { - orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, + orion_time_init((unsigned long) BRIDGE_VIRT_BASE, + BRIDGE_INT_TIMER1_CLR, IRQ_DOVE_BRIDGE, get_tclk()); } diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index cccfd1d..735dd2e 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -25,7 +25,7 @@ */ #define DOVE_CESA_PHYS_BASE 0xc8000000 -#define DOVE_CESA_VIRT_BASE 0xfdb00000 +#define DOVE_CESA_VIRT_BASE IOMEM(0xfdb00000) #define DOVE_CESA_SIZE SZ_1M #define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000 @@ -38,24 +38,24 @@ #define DOVE_BOOTROM_SIZE SZ_128M #define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000 -#define DOVE_SCRATCHPAD_VIRT_BASE 0xfdd00000 +#define DOVE_SCRATCHPAD_VIRT_BASE IOMEM(0xfdd00000) #define DOVE_SCRATCHPAD_SIZE SZ_1M #define DOVE_SB_REGS_PHYS_BASE 0xf1000000 -#define DOVE_SB_REGS_VIRT_BASE 0xfde00000 +#define DOVE_SB_REGS_VIRT_BASE IOMEM(0xfde00000) #define DOVE_SB_REGS_SIZE SZ_8M #define DOVE_NB_REGS_PHYS_BASE 0xf1800000 -#define DOVE_NB_REGS_VIRT_BASE 0xfe600000 +#define DOVE_NB_REGS_VIRT_BASE IOMEM(0xfe600000) #define DOVE_NB_REGS_SIZE SZ_8M #define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000 -#define DOVE_PCIE0_IO_VIRT_BASE 0xfee00000 +#define DOVE_PCIE0_IO_VIRT_BASE IOMEM(0xfee00000) #define DOVE_PCIE0_IO_BUS_BASE 0x00000000 #define DOVE_PCIE0_IO_SIZE SZ_1M #define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000 -#define DOVE_PCIE1_IO_VIRT_BASE 0xfef00000 +#define DOVE_PCIE1_IO_VIRT_BASE IOMEM(0xfef00000) #define DOVE_PCIE1_IO_BUS_BASE 0x00100000 #define DOVE_PCIE1_IO_SIZE SZ_1M diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 9bc97a5..4ce306a 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -99,19 +99,19 @@ void __init dove_init_irq(void) { int i; - orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); - orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); + orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); + orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); /* * Initialize gpiolib for GPIOs 0-71. */ - orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0, + orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, IRQ_DOVE_GPIO_START, gpio0_irqs); - orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0, + orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 32, gpio1_irqs); - orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0, + orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 64, gpio2_irqs); /* diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c index 7f70afc..fc04ebe 100644 --- a/arch/arm/mach-dove/mpp.c +++ b/arch/arm/mach-dove/mpp.c @@ -151,7 +151,8 @@ void __init dove_mpp_conf(unsigned int *mpp_list, dove_mpp_dump_regs(); /* Use platform code for pins 0-23 */ - orion_mpp_conf(mpp_list, 0, MPP_MAX, DOVE_MPP_VIRT_BASE); + orion_mpp_conf(mpp_list, 0, MPP_MAX, + (unsigned long) DOVE_MPP_VIRT_BASE); dove_mpp_conf_grp(mpp_grp_list); dove_mpp_cfg_au1(grp_au1_52_57); diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index 47921b0..b372441 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -197,18 +197,18 @@ static struct hw_pci dove_pci __initdata = { .map_irq = dove_pcie_map_irq, }; -static void __init add_pcie_port(int index, unsigned long base) +static void __init add_pcie_port(int index, void __iomem *base) { printk(KERN_INFO "Dove PCIe port %d: ", index); - if (orion_pcie_link_up((void __iomem *)base)) { + if (orion_pcie_link_up(base)) { struct pcie_port *pp = &pcie_port[num_pcie_ports++]; printk(KERN_INFO "link up\n"); pp->index = index; pp->root_bus_nr = -1; - pp->base = (void __iomem *)base; + pp->base = base; spin_lock_init(&pp->conf_lock); memset(pp->res, 0, sizeof(pp->res)); } else { -- cgit v0.10.2 From 060f3d191b1d80312d7c90de2f3c3356db413f40 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:19 +0200 Subject: arm: mach-kirkwood: use IOMEM() for base address definitions We now define all virtual base address constants using IOMEM() so that those are naturally typed as void __iomem pointers, and we do the necessary adjustements in the mach-kirkwood code. Note that we introduce a few temporary additional "unsigned long" casts when calling into plat-orion functions. Those are removed by followup patches converting plat-orion functions to void __iomem pointers as well. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index e9a7180..1b8c75c 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -41,7 +41,7 @@ static struct __initdata orion_addr_map_cfg addr_map_cfg = { .num_wins = 8, .remappable_wins = 4, - .bridge_virt_base = BRIDGE_VIRT_BASE, + .bridge_virt_base = (unsigned long) BRIDGE_VIRT_BASE, }; static const struct __initdata orion_addr_map_info addr_map_info[] = { diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 1201191..75bc04d 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -42,17 +42,17 @@ ****************************************************************************/ static struct map_desc kirkwood_io_desc[] __initdata = { { - .virtual = KIRKWOOD_PCIE_IO_VIRT_BASE, + .virtual = (unsigned long) KIRKWOOD_PCIE_IO_VIRT_BASE, .pfn = __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE), .length = KIRKWOOD_PCIE_IO_SIZE, .type = MT_DEVICE, }, { - .virtual = KIRKWOOD_PCIE1_IO_VIRT_BASE, + .virtual = (unsigned long) KIRKWOOD_PCIE1_IO_VIRT_BASE, .pfn = __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE), .length = KIRKWOOD_PCIE1_IO_SIZE, .type = MT_DEVICE, }, { - .virtual = KIRKWOOD_REGS_VIRT_BASE, + .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE, .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), .length = KIRKWOOD_REGS_SIZE, .type = MT_DEVICE, @@ -215,8 +215,7 @@ static struct clk *tclk; static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx) { - return clk_register_gate(NULL, name, "tclk", 0, - (void __iomem *)CLOCK_GATING_CTRL, + return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL, bit_idx, 0, &gating_lock); } @@ -225,8 +224,7 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name, void (*fn_en)(void), void (*fn_dis)(void)) { - return clk_register_gate_fn(NULL, name, "tclk", 0, - (void __iomem *)CLOCK_GATING_CTRL, + return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL, bit_idx, 0, &gating_lock, fn_en, fn_dis); } @@ -458,7 +456,8 @@ void __init kirkwood_i2c_init(void) void __init kirkwood_uart0_init(void) { - orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, + orion_uart0_init((unsigned long) UART0_VIRT_BASE, + UART0_PHYS_BASE, IRQ_KIRKWOOD_UART_0, tclk); } @@ -468,7 +467,8 @@ void __init kirkwood_uart0_init(void) ****************************************************************************/ void __init kirkwood_uart1_init(void) { - orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, + orion_uart1_init((unsigned long) UART1_VIRT_BASE, + UART1_PHYS_BASE, IRQ_KIRKWOOD_UART_1, tclk); } @@ -516,7 +516,7 @@ void __init kirkwood_wdt_init(void) ****************************************************************************/ void __init kirkwood_init_early(void) { - orion_time_set_base(TIMER_VIRT_BASE); + orion_time_set_base((unsigned long) TIMER_VIRT_BASE); /* * Some Kirkwood devices allocate their coherent buffers from atomic @@ -545,7 +545,8 @@ static void __init kirkwood_timer_init(void) { kirkwood_tclk = kirkwood_find_tclk(); - orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, + orion_time_init((unsigned long) BRIDGE_VIRT_BASE, + BRIDGE_INT_TIMER1_CLR, IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); } diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 9695592..d3ea682 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -37,17 +37,17 @@ #define KIRKWOOD_NAND_MEM_SIZE SZ_1K #define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000 -#define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000 +#define KIRKWOOD_PCIE1_IO_VIRT_BASE IOMEM(0xfef00000) #define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00100000 #define KIRKWOOD_PCIE1_IO_SIZE SZ_1M #define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 -#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfee00000 +#define KIRKWOOD_PCIE_IO_VIRT_BASE IOMEM(0xfee00000) #define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000 #define KIRKWOOD_PCIE_IO_SIZE SZ_1M #define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 -#define KIRKWOOD_REGS_VIRT_BASE 0xfed00000 +#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000) #define KIRKWOOD_REGS_SIZE SZ_1M #define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 720063f..f4ac804 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include @@ -29,14 +30,14 @@ static int __initdata gpio1_irqs[4] = { void __init kirkwood_init_irq(void) { - orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); - orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); + orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); + orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); /* * Initialize gpiolib for GPIOs 0-49. */ - orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0, + orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0, IRQ_KIRKWOOD_GPIO_START, gpio0_irqs); - orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0, + orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0, IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs); } diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 0c6ad63..6774279 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -38,5 +38,6 @@ static unsigned int __init kirkwood_variant(void) void __init kirkwood_mpp_conf(unsigned int *mpp_list) { orion_mpp_conf(mpp_list, kirkwood_variant(), - MPP_MAX, DEV_BUS_VIRT_BASE); + MPP_MAX, + (unsigned long) DEV_BUS_VIRT_BASE); } diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 6e8b2ef..df6399d 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -47,8 +47,8 @@ void kirkwood_enable_pcie(void) void kirkwood_pcie_id(u32 *dev, u32 *rev) { kirkwood_enable_pcie(); - *dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE); - *rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE); + *dev = orion_pcie_dev_id(PCIE_VIRT_BASE); + *rev = orion_pcie_rev(PCIE_VIRT_BASE); } struct pcie_port { @@ -133,7 +133,7 @@ static struct pci_ops pcie_ops = { static void __init pcie0_ioresources_init(struct pcie_port *pp) { - pp->base = (void __iomem *)PCIE_VIRT_BASE; + pp->base = PCIE_VIRT_BASE; pp->irq = IRQ_KIRKWOOD_PCIE; /* @@ -155,7 +155,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp) static void __init pcie1_ioresources_init(struct pcie_port *pp) { - pp->base = (void __iomem *)PCIE1_VIRT_BASE; + pp->base = PCIE1_VIRT_BASE; pp->irq = IRQ_KIRKWOOD_PCIE1; /* @@ -273,11 +273,11 @@ static struct hw_pci kirkwood_pci __initdata = { .map_irq = kirkwood_pcie_map_irq, }; -static void __init add_pcie_port(int index, unsigned long base) +static void __init add_pcie_port(int index, void __iomem *base) { printk(KERN_INFO "Kirkwood PCIe port %d: ", index); - if (orion_pcie_link_up((void __iomem *)base)) { + if (orion_pcie_link_up(base)) { printk(KERN_INFO "link up\n"); pcie_port_map[num_pcie_ports++] = index; } else diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 5bbca26..367a940 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -161,7 +162,7 @@ static int __init ts41x_pci_init(void) * (Marvell 88sx7042/sata_mv) is known to stop working * after a few minutes. */ - orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE); + orion_pcie_reset(PCIE_VIRT_BASE); kirkwood_pcie_id(&dev, &rev); if (dev == MV88F6282_DEV_ID) -- cgit v0.10.2 From 383b99610e6084878930d4e4682dfc5e9141b038 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:20 +0200 Subject: arm: mach-mv78xx0: use IOMEM() for base address definitions We now define all virtual base address constants using IOMEM() so that those are naturally typed as void __iomem pointers, and we do the necessary adjustements in the mach-mv78xx0 code. Note that we introduce a few temporary additional "unsigned long" casts when calling into plat-orion functions. Those are removed by followup patches converting plat-orion functions to void __iomem pointers as well. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index a9bc841..3358f07 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -47,7 +47,7 @@ static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, i * so we don't need to take that into account here. */ - return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win)); + return (win < 8) ? WIN0_OFF(win) : WIN8_OFF(win); } /* diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 3057f7d..c4e3458 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -130,17 +130,17 @@ static int get_tclk(void) ****************************************************************************/ static struct map_desc mv78xx0_io_desc[] __initdata = { { - .virtual = MV78XX0_CORE_REGS_VIRT_BASE, + .virtual = (unsigned long) MV78XX0_CORE_REGS_VIRT_BASE, .pfn = 0, .length = MV78XX0_CORE_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = MV78XX0_PCIE_IO_VIRT_BASE(0), + .virtual = (unsigned long) MV78XX0_PCIE_IO_VIRT_BASE(0), .pfn = __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)), .length = MV78XX0_PCIE_IO_SIZE * 8, .type = MT_DEVICE, }, { - .virtual = MV78XX0_REGS_VIRT_BASE, + .virtual = (unsigned long) MV78XX0_REGS_VIRT_BASE, .pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE), .length = MV78XX0_REGS_SIZE, .type = MT_DEVICE, @@ -300,7 +300,8 @@ void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data) ****************************************************************************/ void __init mv78xx0_uart0_init(void) { - orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, + orion_uart0_init((unsigned long) UART0_VIRT_BASE, + UART0_PHYS_BASE, IRQ_MV78XX0_UART_0, tclk); } @@ -310,7 +311,8 @@ void __init mv78xx0_uart0_init(void) ****************************************************************************/ void __init mv78xx0_uart1_init(void) { - orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, + orion_uart1_init((unsigned long) UART1_VIRT_BASE, + UART1_PHYS_BASE, IRQ_MV78XX0_UART_1, tclk); } @@ -320,7 +322,8 @@ void __init mv78xx0_uart1_init(void) ****************************************************************************/ void __init mv78xx0_uart2_init(void) { - orion_uart2_init(UART2_VIRT_BASE, UART2_PHYS_BASE, + orion_uart2_init((unsigned long) UART2_VIRT_BASE, + UART2_PHYS_BASE, IRQ_MV78XX0_UART_2, tclk); } @@ -329,7 +332,8 @@ void __init mv78xx0_uart2_init(void) ****************************************************************************/ void __init mv78xx0_uart3_init(void) { - orion_uart3_init(UART3_VIRT_BASE, UART3_PHYS_BASE, + orion_uart3_init((unsigned long) UART3_VIRT_BASE, + UART3_PHYS_BASE, IRQ_MV78XX0_UART_3, tclk); } @@ -338,12 +342,13 @@ void __init mv78xx0_uart3_init(void) ****************************************************************************/ void __init mv78xx0_init_early(void) { - orion_time_set_base(TIMER_VIRT_BASE); + orion_time_set_base((unsigned long) TIMER_VIRT_BASE); } static void mv78xx0_timer_init(void) { - orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, + orion_time_init((unsigned long) BRIDGE_VIRT_BASE, + BRIDGE_INT_TIMER1_CLR, IRQ_MV78XX0_TIMER_1, get_tclk()); } diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index a86e79e..62405e8 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -41,16 +41,16 @@ */ #define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 #define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 -#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000 +#define MV78XX0_CORE_REGS_VIRT_BASE IOMEM(0xfe400000) #define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000 #define MV78XX0_CORE_REGS_SIZE SZ_16K #define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20)) -#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20)) +#define MV78XX0_PCIE_IO_VIRT_BASE(i) IOMEM(0xfe700000 + ((i) << 20)) #define MV78XX0_PCIE_IO_SIZE SZ_1M #define MV78XX0_REGS_PHYS_BASE 0xf1000000 -#define MV78XX0_REGS_VIRT_BASE 0xfef00000 +#define MV78XX0_REGS_VIRT_BASE IOMEM(0xfef00000) #define MV78XX0_REGS_SIZE SZ_1M #define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000 diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index eff9a75..b5c40c4 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include "common.h" @@ -23,16 +24,16 @@ static int __initdata gpio0_irqs[4] = { void __init mv78xx0_init_irq(void) { - orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); - orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); - orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF)); + orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); + orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); + orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF); /* * Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask * registers for core #1 are at an offset of 0x18 from those of * core #0.) */ - orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, + orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0, IRQ_MV78XX0_GPIO_START, gpio0_irqs); } diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c index df50342..4da82f8 100644 --- a/arch/arm/mach-mv78xx0/mpp.c +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -33,5 +33,6 @@ static unsigned int __init mv78xx0_variant(void) void __init mv78xx0_mpp_conf(unsigned int *mpp_list) { orion_mpp_conf(mpp_list, mv78xx0_variant(), - MPP_MAX, DEV_BUS_VIRT_BASE); + MPP_MAX, + (unsigned long) DEV_BUS_VIRT_BASE); } diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index 2e56e86..e2940fb 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -36,8 +36,8 @@ static struct resource pcie_mem_space; void __init mv78xx0_pcie_id(u32 *dev, u32 *rev) { - *dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE); - *rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE); + *dev = orion_pcie_dev_id(PCIE00_VIRT_BASE); + *rev = orion_pcie_rev(PCIE00_VIRT_BASE); } static void __init mv78xx0_pcie_preinit(void) @@ -267,11 +267,11 @@ static struct hw_pci mv78xx0_pci __initdata = { .map_irq = mv78xx0_pcie_map_irq, }; -static void __init add_pcie_port(int maj, int min, unsigned long base) +static void __init add_pcie_port(int maj, int min, void __iomem *base) { printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min); - if (orion_pcie_link_up((void __iomem *)base)) { + if (orion_pcie_link_up(base)) { struct pcie_port *pp = &pcie_port[num_pcie_ports++]; printk("link up\n"); @@ -279,7 +279,7 @@ static void __init add_pcie_port(int maj, int min, unsigned long base) pp->maj = maj; pp->min = min; pp->root_bus_nr = -1; - pp->base = (void __iomem *)base; + pp->base = base; spin_lock_init(&pp->conf_lock); memset(pp->res, 0, sizeof(pp->res)); } else { @@ -293,7 +293,7 @@ void __init mv78xx0_pcie_init(int init_port0, int init_port1) if (init_port0) { add_pcie_port(0, 0, PCIE00_VIRT_BASE); - if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) { + if (!orion_pcie_x4_mode(PCIE00_VIRT_BASE)) { add_pcie_port(0, 1, PCIE01_VIRT_BASE); add_pcie_port(0, 2, PCIE02_VIRT_BASE); add_pcie_port(0, 3, PCIE03_VIRT_BASE); -- cgit v0.10.2 From 3904a39321422d424f790d18a4746b99e1aed0e9 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:21 +0200 Subject: arm: mach-orion5x: use IOMEM() for base address definitions We now define all virtual base address constants using IOMEM() so that those are naturally typed as void __iomem pointers, and we do the necessary adjustements in the mach-orion5x code. Note that we introduce a few temporary additional "unsigned long" casts when calling into plat-orion functions. Those are removed by followup patches converting plat-orion functions to void __iomem pointers as well. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index eaac83d..d309f53 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -79,7 +79,7 @@ static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg, static struct orion_addr_map_cfg addr_map_cfg __initdata = { .num_wins = 8, .cpu_win_can_remap = cpu_win_can_remap, - .bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE, + .bridge_virt_base = (unsigned long) ORION5X_BRIDGE_VIRT_BASE, }; static const struct __initdata orion_addr_map_info addr_map_info[] = { diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 410291c..a890cb0 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -42,22 +42,22 @@ ****************************************************************************/ static struct map_desc orion5x_io_desc[] __initdata = { { - .virtual = ORION5X_REGS_VIRT_BASE, + .virtual = (unsigned long) ORION5X_REGS_VIRT_BASE, .pfn = __phys_to_pfn(ORION5X_REGS_PHYS_BASE), .length = ORION5X_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = ORION5X_PCIE_IO_VIRT_BASE, + .virtual = (unsigned long) ORION5X_PCIE_IO_VIRT_BASE, .pfn = __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE), .length = ORION5X_PCIE_IO_SIZE, .type = MT_DEVICE, }, { - .virtual = ORION5X_PCI_IO_VIRT_BASE, + .virtual = (unsigned long) ORION5X_PCI_IO_VIRT_BASE, .pfn = __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE), .length = ORION5X_PCI_IO_SIZE, .type = MT_DEVICE, }, { - .virtual = ORION5X_PCIE_WA_VIRT_BASE, + .virtual = (unsigned long) ORION5X_PCIE_WA_VIRT_BASE, .pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE), .length = ORION5X_PCIE_WA_SIZE, .type = MT_DEVICE, @@ -156,7 +156,8 @@ void __init orion5x_spi_init() ****************************************************************************/ void __init orion5x_uart0_init(void) { - orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, + orion_uart0_init((unsigned long) UART0_VIRT_BASE, + UART0_PHYS_BASE, IRQ_ORION5X_UART0, tclk); } @@ -165,7 +166,8 @@ void __init orion5x_uart0_init(void) ****************************************************************************/ void __init orion5x_uart1_init(void) { - orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, + orion_uart1_init((unsigned long) UART1_VIRT_BASE, + UART1_PHYS_BASE, IRQ_ORION5X_UART1, tclk); } @@ -203,7 +205,7 @@ void __init orion5x_wdt_init(void) ****************************************************************************/ void __init orion5x_init_early(void) { - orion_time_set_base(TIMER_VIRT_BASE); + orion_time_set_base((unsigned long) TIMER_VIRT_BASE); } int orion5x_tclk; @@ -224,7 +226,8 @@ static void __init orion5x_timer_init(void) { orion5x_tclk = orion5x_find_tclk(); - orion_time_init(ORION5X_BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, + orion_time_init((unsigned long) ORION5X_BRIDGE_VIRT_BASE, + BRIDGE_INT_TIMER1_CLR, IRQ_ORION5X_BRIDGE, orion5x_tclk); } diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index d470864..3a5e6fc 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -700,7 +700,7 @@ static void __init dns323_init(void) * Note: AFAIK, rev B1 needs the same treatement but I'll let * somebody else test it. */ - writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c); + writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c); break; } } diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 87bd378..6fd38ab 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -37,16 +37,16 @@ * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) ****************************************************************************/ #define ORION5X_REGS_PHYS_BASE 0xf1000000 -#define ORION5X_REGS_VIRT_BASE 0xfdd00000 +#define ORION5X_REGS_VIRT_BASE IOMEM(0xfdd00000) #define ORION5X_REGS_SIZE SZ_1M #define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000 -#define ORION5X_PCIE_IO_VIRT_BASE 0xfde00000 +#define ORION5X_PCIE_IO_VIRT_BASE IOMEM(0xfde00000) #define ORION5X_PCIE_IO_BUS_BASE 0x00000000 #define ORION5X_PCIE_IO_SIZE SZ_1M #define ORION5X_PCI_IO_PHYS_BASE 0xf2100000 -#define ORION5X_PCI_IO_VIRT_BASE 0xfdf00000 +#define ORION5X_PCI_IO_VIRT_BASE IOMEM(0xfdf00000) #define ORION5X_PCI_IO_BUS_BASE 0x00100000 #define ORION5X_PCI_IO_SIZE SZ_1M @@ -55,7 +55,7 @@ /* Relevant only for Orion-1/Orion-NAS */ #define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000 -#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000 +#define ORION5X_PCIE_WA_VIRT_BASE IOMEM(0xfe000000) #define ORION5X_PCIE_WA_SIZE SZ_16M #define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000 diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index 17da709..bf9ff4f 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -24,11 +25,11 @@ static int __initdata gpio0_irqs[4] = { void __init orion5x_init_irq(void) { - orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK); + orion_irq_init(0, MAIN_IRQ_MASK); /* * Initialize gpiolib for GPIOs 0-31. */ - orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, 0, + orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START, gpio0_irqs); } diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index 5b70026..30f5ef6 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -40,5 +40,6 @@ static unsigned int __init orion5x_variant(void) void __init orion5x_mpp_conf(unsigned int *mpp_list) { orion_mpp_conf(mpp_list, orion5x_variant(), - MPP_MAX, ORION5X_DEV_BUS_VIRT_BASE); + MPP_MAX, + (unsigned long) ORION5X_DEV_BUS_VIRT_BASE); } diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index b36f928..b0822a8 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -38,7 +38,7 @@ /***************************************************************************** * PCIe controller ****************************************************************************/ -#define PCIE_BASE ((void __iomem *)ORION5X_PCIE_VIRT_BASE) +#define PCIE_BASE (ORION5X_PCIE_VIRT_BASE) void __init orion5x_pcie_id(u32 *dev, u32 *rev) { @@ -111,7 +111,7 @@ static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn, return PCIBIOS_DEVICE_NOT_FOUND; } - ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE, + ret = orion_pcie_rd_conf_wa(ORION5X_PCIE_WA_VIRT_BASE, bus, devfn, where, size, val); return ret; -- cgit v0.10.2 From 9758e70a448f92fb850712650a0394d8532c17ff Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:22 +0200 Subject: arm: mach-mvebu: use IOMEM() for base address definitions We now define all virtual base address constants using IOMEM() so that those are naturally typed as void __iomem pointers, and we do the necessary adjustements in the mach-mvebu code. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 4ef923b..dfe635b 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -25,7 +25,7 @@ static struct map_desc armada_370_xp_io_desc[] __initdata = { { - .virtual = ARMADA_370_XP_REGS_VIRT_BASE, + .virtual = (unsigned long) ARMADA_370_XP_REGS_VIRT_BASE, .pfn = __phys_to_pfn(ARMADA_370_XP_REGS_PHYS_BASE), .length = ARMADA_370_XP_REGS_SIZE, .type = MT_DEVICE, diff --git a/arch/arm/mach-mvebu/include/mach/armada-370-xp.h b/arch/arm/mach-mvebu/include/mach/armada-370-xp.h index 25f0ca8..aac9beb 100644 --- a/arch/arm/mach-mvebu/include/mach/armada-370-xp.h +++ b/arch/arm/mach-mvebu/include/mach/armada-370-xp.h @@ -16,7 +16,7 @@ #define __MACH_ARMADA_370_XP_H #define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000 -#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000 +#define ARMADA_370_XP_REGS_VIRT_BASE IOMEM(0xfeb00000) #define ARMADA_370_XP_REGS_SIZE SZ_1M #endif /* __MACH_ARMADA_370_XP_H */ -- cgit v0.10.2 From d19beac1d9358bb4a2a303f4327bf2d40ba88464 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:23 +0200 Subject: arm: plat-orion: use void __iomem pointers for UART registration functions The registration functions for UARTs now take void __iomem pointers, so we remove the temporary "unsigned long" casts from the mach-*/common.c files. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 533fd81..ba55f63 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -128,8 +128,7 @@ void __init dove_sata_init(struct mv_sata_platform_data *sata_data) ****************************************************************************/ void __init dove_uart0_init(void) { - orion_uart0_init((unsigned long) DOVE_UART0_VIRT_BASE, - DOVE_UART0_PHYS_BASE, + orion_uart0_init(DOVE_UART0_VIRT_BASE, DOVE_UART0_PHYS_BASE, IRQ_DOVE_UART_0, tclk); } @@ -138,8 +137,7 @@ void __init dove_uart0_init(void) ****************************************************************************/ void __init dove_uart1_init(void) { - orion_uart1_init((unsigned long) DOVE_UART1_VIRT_BASE, - DOVE_UART1_PHYS_BASE, + orion_uart1_init(DOVE_UART1_VIRT_BASE, DOVE_UART1_PHYS_BASE, IRQ_DOVE_UART_1, tclk); } @@ -148,8 +146,7 @@ void __init dove_uart1_init(void) ****************************************************************************/ void __init dove_uart2_init(void) { - orion_uart2_init((unsigned long) DOVE_UART2_VIRT_BASE, - DOVE_UART2_PHYS_BASE, + orion_uart2_init(DOVE_UART2_VIRT_BASE, DOVE_UART2_PHYS_BASE, IRQ_DOVE_UART_2, tclk); } @@ -158,8 +155,7 @@ void __init dove_uart2_init(void) ****************************************************************************/ void __init dove_uart3_init(void) { - orion_uart3_init((unsigned long) DOVE_UART3_VIRT_BASE, - DOVE_UART3_PHYS_BASE, + orion_uart3_init(DOVE_UART3_VIRT_BASE, DOVE_UART3_PHYS_BASE, IRQ_DOVE_UART_3, tclk); } diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 75bc04d..defceca 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -456,8 +456,7 @@ void __init kirkwood_i2c_init(void) void __init kirkwood_uart0_init(void) { - orion_uart0_init((unsigned long) UART0_VIRT_BASE, - UART0_PHYS_BASE, + orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, IRQ_KIRKWOOD_UART_0, tclk); } @@ -467,8 +466,7 @@ void __init kirkwood_uart0_init(void) ****************************************************************************/ void __init kirkwood_uart1_init(void) { - orion_uart1_init((unsigned long) UART1_VIRT_BASE, - UART1_PHYS_BASE, + orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, IRQ_KIRKWOOD_UART_1, tclk); } diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index c4e3458..fcda4a4 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -300,8 +300,7 @@ void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data) ****************************************************************************/ void __init mv78xx0_uart0_init(void) { - orion_uart0_init((unsigned long) UART0_VIRT_BASE, - UART0_PHYS_BASE, + orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, IRQ_MV78XX0_UART_0, tclk); } @@ -311,8 +310,7 @@ void __init mv78xx0_uart0_init(void) ****************************************************************************/ void __init mv78xx0_uart1_init(void) { - orion_uart1_init((unsigned long) UART1_VIRT_BASE, - UART1_PHYS_BASE, + orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, IRQ_MV78XX0_UART_1, tclk); } @@ -322,8 +320,7 @@ void __init mv78xx0_uart1_init(void) ****************************************************************************/ void __init mv78xx0_uart2_init(void) { - orion_uart2_init((unsigned long) UART2_VIRT_BASE, - UART2_PHYS_BASE, + orion_uart2_init(UART2_VIRT_BASE, UART2_PHYS_BASE, IRQ_MV78XX0_UART_2, tclk); } @@ -332,8 +329,7 @@ void __init mv78xx0_uart2_init(void) ****************************************************************************/ void __init mv78xx0_uart3_init(void) { - orion_uart3_init((unsigned long) UART3_VIRT_BASE, - UART3_PHYS_BASE, + orion_uart3_init(UART3_VIRT_BASE, UART3_PHYS_BASE, IRQ_MV78XX0_UART_3, tclk); } diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index a890cb0..79f9ffb 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -156,8 +156,7 @@ void __init orion5x_spi_init() ****************************************************************************/ void __init orion5x_uart0_init(void) { - orion_uart0_init((unsigned long) UART0_VIRT_BASE, - UART0_PHYS_BASE, + orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, IRQ_ORION5X_UART0, tclk); } @@ -166,8 +165,7 @@ void __init orion5x_uart0_init(void) ****************************************************************************/ void __init orion5x_uart1_init(void) { - orion_uart1_init((unsigned long) UART1_VIRT_BASE, - UART1_PHYS_BASE, + orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, IRQ_ORION5X_UART1, tclk); } diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index b8b747a..5bed711 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -86,13 +86,13 @@ static void __init uart_complete( struct platform_device *orion_uart, struct plat_serial8250_port *data, struct resource *resources, - unsigned int membase, + void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk) { data->mapbase = mapbase; - data->membase = (void __iomem *)membase; + data->membase = membase; data->irq = irq; data->uartclk = uart_get_clk_rate(clk); orion_uart->dev.platform_data = data; @@ -120,7 +120,7 @@ static struct platform_device orion_uart0 = { .id = PLAT8250_DEV_PLATFORM, }; -void __init orion_uart0_init(unsigned int membase, +void __init orion_uart0_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk) @@ -148,7 +148,7 @@ static struct platform_device orion_uart1 = { .id = PLAT8250_DEV_PLATFORM1, }; -void __init orion_uart1_init(unsigned int membase, +void __init orion_uart1_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk) @@ -176,7 +176,7 @@ static struct platform_device orion_uart2 = { .id = PLAT8250_DEV_PLATFORM2, }; -void __init orion_uart2_init(unsigned int membase, +void __init orion_uart2_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk) @@ -204,7 +204,7 @@ static struct platform_device orion_uart3 = { .id = 3, }; -void __init orion_uart3_init(unsigned int membase, +void __init orion_uart3_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk) diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index ae2377e..6bbc3fe 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -13,22 +13,22 @@ struct dsa_platform_data; -void __init orion_uart0_init(unsigned int membase, +void __init orion_uart0_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk); -void __init orion_uart1_init(unsigned int membase, +void __init orion_uart1_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk); -void __init orion_uart2_init(unsigned int membase, +void __init orion_uart2_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk); -void __init orion_uart3_init(unsigned int membase, +void __init orion_uart3_init(void __iomem *membase, resource_size_t mapbase, unsigned int irq, struct clk *clk); -- cgit v0.10.2 From 5a2f55019391218d8c08c6f9d32591d91200de77 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:24 +0200 Subject: arm: plat-orion: use void __iomem pointers for MPP functions The registration function for MPP now takes void __iomem pointers, so we remove the temporary "unsigned long" casts from the mach-*/mpp.c files. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c index fc04ebe..7f70afc 100644 --- a/arch/arm/mach-dove/mpp.c +++ b/arch/arm/mach-dove/mpp.c @@ -151,8 +151,7 @@ void __init dove_mpp_conf(unsigned int *mpp_list, dove_mpp_dump_regs(); /* Use platform code for pins 0-23 */ - orion_mpp_conf(mpp_list, 0, MPP_MAX, - (unsigned long) DOVE_MPP_VIRT_BASE); + orion_mpp_conf(mpp_list, 0, MPP_MAX, DOVE_MPP_VIRT_BASE); dove_mpp_conf_grp(mpp_grp_list); dove_mpp_cfg_au1(grp_au1_52_57); diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 6774279..0c6ad63 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -38,6 +38,5 @@ static unsigned int __init kirkwood_variant(void) void __init kirkwood_mpp_conf(unsigned int *mpp_list) { orion_mpp_conf(mpp_list, kirkwood_variant(), - MPP_MAX, - (unsigned long) DEV_BUS_VIRT_BASE); + MPP_MAX, DEV_BUS_VIRT_BASE); } diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c index 4da82f8..df50342 100644 --- a/arch/arm/mach-mv78xx0/mpp.c +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -33,6 +33,5 @@ static unsigned int __init mv78xx0_variant(void) void __init mv78xx0_mpp_conf(unsigned int *mpp_list) { orion_mpp_conf(mpp_list, mv78xx0_variant(), - MPP_MAX, - (unsigned long) DEV_BUS_VIRT_BASE); + MPP_MAX, DEV_BUS_VIRT_BASE); } diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index 30f5ef6..5b70026 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -40,6 +40,5 @@ static unsigned int __init orion5x_variant(void) void __init orion5x_mpp_conf(unsigned int *mpp_list) { orion_mpp_conf(mpp_list, orion5x_variant(), - MPP_MAX, - (unsigned long) ORION5X_DEV_BUS_VIRT_BASE); + MPP_MAX, ORION5X_DEV_BUS_VIRT_BASE); } diff --git a/arch/arm/plat-orion/include/plat/mpp.h b/arch/arm/plat-orion/include/plat/mpp.h index 723adce..254552f 100644 --- a/arch/arm/plat-orion/include/plat/mpp.h +++ b/arch/arm/plat-orion/include/plat/mpp.h @@ -29,6 +29,6 @@ #define MPP_OUTPUT_MASK GENERIC_MPP(0, 0x0, 0, 1) void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask, - unsigned int mpp_max, unsigned int dev_bus); + unsigned int mpp_max, void __iomem *dev_bus); #endif diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c index 3b1e17b..20d4208 100644 --- a/arch/arm/plat-orion/mpp.c +++ b/arch/arm/plat-orion/mpp.c @@ -17,15 +17,15 @@ #include /* Address of the ith MPP control register */ -static __init unsigned long mpp_ctrl_addr(unsigned int i, - unsigned long dev_bus) +static __init void __iomem *mpp_ctrl_addr(unsigned int i, + void __iomem *dev_bus) { return dev_bus + (i) * 4; } void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask, - unsigned int mpp_max, unsigned int dev_bus) + unsigned int mpp_max, void __iomem *dev_bus) { unsigned int mpp_nr_regs = (1 + mpp_max/8); u32 mpp_ctrl[mpp_nr_regs]; -- cgit v0.10.2 From e96a0309f8545d539c1bf4acd5b58727a8f39818 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:25 +0200 Subject: arm: plat-orion: use void __iomem pointers for time functions The functions for time management now take void __iomem pointers, so we remove the temporary "unsigned long" casts from the mach-*/common.c files. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index ba55f63..cb65599 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -185,7 +185,7 @@ void __init dove_i2c_init(void) ****************************************************************************/ void __init dove_init_early(void) { - orion_time_set_base((unsigned long) TIMER_VIRT_BASE); + orion_time_set_base(TIMER_VIRT_BASE); } static int get_tclk(void) @@ -196,8 +196,7 @@ static int get_tclk(void) static void __init dove_timer_init(void) { - orion_time_init((unsigned long) BRIDGE_VIRT_BASE, - BRIDGE_INT_TIMER1_CLR, + orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, IRQ_DOVE_BRIDGE, get_tclk()); } diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index defceca..55bf919 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -514,7 +514,7 @@ void __init kirkwood_wdt_init(void) ****************************************************************************/ void __init kirkwood_init_early(void) { - orion_time_set_base((unsigned long) TIMER_VIRT_BASE); + orion_time_set_base(TIMER_VIRT_BASE); /* * Some Kirkwood devices allocate their coherent buffers from atomic @@ -543,8 +543,7 @@ static void __init kirkwood_timer_init(void) { kirkwood_tclk = kirkwood_find_tclk(); - orion_time_init((unsigned long) BRIDGE_VIRT_BASE, - BRIDGE_INT_TIMER1_CLR, + orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); } diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index fcda4a4..f123517a 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -338,13 +338,12 @@ void __init mv78xx0_uart3_init(void) ****************************************************************************/ void __init mv78xx0_init_early(void) { - orion_time_set_base((unsigned long) TIMER_VIRT_BASE); + orion_time_set_base(TIMER_VIRT_BASE); } static void mv78xx0_timer_init(void) { - orion_time_init((unsigned long) BRIDGE_VIRT_BASE, - BRIDGE_INT_TIMER1_CLR, + orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, IRQ_MV78XX0_TIMER_1, get_tclk()); } diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 79f9ffb..58b754f 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -203,7 +203,7 @@ void __init orion5x_wdt_init(void) ****************************************************************************/ void __init orion5x_init_early(void) { - orion_time_set_base((unsigned long) TIMER_VIRT_BASE); + orion_time_set_base(TIMER_VIRT_BASE); } int orion5x_tclk; @@ -224,8 +224,7 @@ static void __init orion5x_timer_init(void) { orion5x_tclk = orion5x_find_tclk(); - orion_time_init((unsigned long) ORION5X_BRIDGE_VIRT_BASE, - BRIDGE_INT_TIMER1_CLR, + orion_time_init(ORION5X_BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, IRQ_ORION5X_BRIDGE, orion5x_tclk); } diff --git a/arch/arm/plat-orion/include/plat/time.h b/arch/arm/plat-orion/include/plat/time.h index 4d5f1f6..07527e4 100644 --- a/arch/arm/plat-orion/include/plat/time.h +++ b/arch/arm/plat-orion/include/plat/time.h @@ -11,9 +11,9 @@ #ifndef __PLAT_TIME_H #define __PLAT_TIME_H -void orion_time_set_base(u32 timer_base); +void orion_time_set_base(void __iomem *timer_base); -void orion_time_init(u32 bridge_base, u32 bridge_timer1_clr_mask, +void orion_time_init(void __iomem *bridge_base, u32 bridge_timer1_clr_mask, unsigned int irq, unsigned int tclk); diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index 1ed8d13..0f4fa86 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -180,13 +180,13 @@ static struct irqaction orion_timer_irq = { }; void __init -orion_time_set_base(u32 _timer_base) +orion_time_set_base(void __iomem *_timer_base) { - timer_base = (void __iomem *)_timer_base; + timer_base = _timer_base; } void __init -orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask, +orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask, unsigned int irq, unsigned int tclk) { u32 u; @@ -194,7 +194,7 @@ orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask, /* * Set SoC-specific data. */ - bridge_base = (void __iomem *)_bridge_base; + bridge_base = _bridge_base; bridge_timer1_clr_mask = _bridge_timer1_clr_mask; ticks_per_jiffy = (tclk + HZ/2) / HZ; -- cgit v0.10.2 From 9b7b7d8b024d3e44412abbbb0206ab8f60c459ad Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:26 +0200 Subject: arm: plat-orion: use void __iomem pointers for addr-map functions The functions for address mapping management now take void __iomem pointers, so we remove the temporary "unsigned long" casts from the mach-*/common.c files. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c index b92c9c7..2a06c01 100644 --- a/arch/arm/mach-dove/addr-map.c +++ b/arch/arm/mach-dove/addr-map.c @@ -47,7 +47,7 @@ static inline void __iomem *ddr_map_sc(int i) static struct __initdata orion_addr_map_cfg addr_map_cfg = { .num_wins = 8, .remappable_wins = 4, - .bridge_virt_base = (unsigned long) BRIDGE_VIRT_BASE, + .bridge_virt_base = BRIDGE_VIRT_BASE, }; static const struct __initdata orion_addr_map_info addr_map_info[] = { diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index 1b8c75c..8f0d162 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -41,7 +41,7 @@ static struct __initdata orion_addr_map_cfg addr_map_cfg = { .num_wins = 8, .remappable_wins = 4, - .bridge_virt_base = (unsigned long) BRIDGE_VIRT_BASE, + .bridge_virt_base = BRIDGE_VIRT_BASE, }; static const struct __initdata orion_addr_map_info addr_map_info[] = { @@ -86,5 +86,6 @@ void __init kirkwood_setup_cpu_mbus(void) /* * Setup MBUS dram target info. */ - orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE); + orion_setup_cpu_mbus_target(&addr_map_cfg, + (void __iomem *) DDR_WINDOW_CPU_BASE); } diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 3358f07..a51fc24 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -71,10 +71,10 @@ void __init mv78xx0_setup_cpu_mbus(void) */ if (mv78xx0_core_index() == 0) orion_setup_cpu_mbus_target(&addr_map_cfg, - DDR_WINDOW_CPU0_BASE); + (void __iomem *) DDR_WINDOW_CPU0_BASE); else orion_setup_cpu_mbus_target(&addr_map_cfg, - DDR_WINDOW_CPU1_BASE); + (void __iomem *) DDR_WINDOW_CPU1_BASE); } void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index d309f53..b5efc0f 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -79,7 +79,7 @@ static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg, static struct orion_addr_map_cfg addr_map_cfg __initdata = { .num_wins = 8, .cpu_win_can_remap = cpu_win_can_remap, - .bridge_virt_base = (unsigned long) ORION5X_BRIDGE_VIRT_BASE, + .bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE, }; static const struct __initdata orion_addr_map_info addr_map_info[] = { @@ -113,7 +113,8 @@ void __init orion5x_setup_cpu_mbus_bridge(void) /* * Setup MBUS dram target info. */ - orion_setup_cpu_mbus_target(&addr_map_cfg, ORION5X_DDR_WINDOW_CPU_BASE); + orion_setup_cpu_mbus_target(&addr_map_cfg, + (void __iomem *) ORION5X_DDR_WINDOW_CPU_BASE); } void __init orion5x_setup_dev_boot_win(u32 base, u32 size) diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c index 367ca89..a7b8060 100644 --- a/arch/arm/plat-orion/addr-map.c +++ b/arch/arm/plat-orion/addr-map.c @@ -48,7 +48,7 @@ EXPORT_SYMBOL_GPL(mv_mbus_dram_info); static void __init __iomem * orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { - return (void __iomem *)(cfg->bridge_virt_base + (win << 4)); + return cfg->bridge_virt_base + (win << 4); } /* @@ -143,19 +143,16 @@ void __init orion_config_wins(struct orion_addr_map_cfg * cfg, * Setup MBUS dram target info. */ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, - const u32 ddr_window_cpu_base) + const void __iomem *ddr_window_cpu_base) { - void __iomem *addr; int i; int cs; orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - addr = (void __iomem *)ddr_window_cpu_base; - for (i = 0, cs = 0; i < 4; i++) { - u32 base = readl(addr + DDR_BASE_CS_OFF(i)); - u32 size = readl(addr + DDR_SIZE_CS_OFF(i)); + u32 base = readl(ddr_window_cpu_base + DDR_BASE_CS_OFF(i)); + u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i)); /* * Chip select enabled? diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h index fd556f7..0a746fd 100644 --- a/arch/arm/plat-orion/include/plat/addr-map.h +++ b/arch/arm/plat-orion/include/plat/addr-map.h @@ -16,7 +16,7 @@ extern struct mbus_dram_target_info orion_mbus_dram_info; struct orion_addr_map_cfg { const int num_wins; /* Total number of windows */ const int remappable_wins; - const u32 bridge_virt_base; + void __iomem * const bridge_virt_base; /* If NULL, the default cpu_win_can_remap will be used, using the value in remappable_wins */ @@ -49,5 +49,5 @@ void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg, const u8 attr, const int remap); void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, - const u32 ddr_window_cpu_base); + const void __iomem *ddr_window_cpu_base); #endif -- cgit v0.10.2 From abcda1dc3e23366c8543b372e9bf4e9086d5cca1 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:27 +0200 Subject: arm: plat-orion: introduce PLAT_ORION_LEGACY hidden config option Until now, the PLAT_ORION configuration option was common to all the Marvell EBU SoCs, and selecting this option had the effect of enabling the MPP code, GPIO code, address decoding and PCIe code from plat-orion, as well as providing access to driver-specific header files from plat-orion/include. However, the Armada 370 and XP SoCs will not use the MPP and GPIO code (instead some proper pinctrl and gpio drivers are in preparation), and generally, we want to move away from plat-orion and instead have everything in mach-mvebu. That said, in the mean time, we want to leverage the driver-specific headers as well as the address decoding code, so we introduce PLAT_ORION_LEGACY. The older Marvell SoCs need to select PLAT_ORION_LEGACY, while the newer Marvell SoCs need to select PLAT_ORION. Of course, when PLAT_ORION_LEGACY is selected, it automatically selects PLAT_ORION. Then, with just PLAT_ORION, you have the address decoding code plus the driver-specific headers. If you add PLAT_ORION_LEGACY to this, you gain the old MPP, GPIO and PCIe code. Again, this is only a temporary solution until we make all Marvell EBU platforms converge into the mach-mvebu directory. This solution avoids duplicating the existing address decoding code into mach-mvebu. Signed-off-by: Thomas Petazzoni Acked-by: Gregory CLEMENT Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2f88d8d..a4eab57 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -567,6 +567,7 @@ config ARCH_MVEBU select GENERIC_IRQ_CHIP select IRQ_DOMAIN select COMMON_CLK + select PLAT_ORION help Support for the Marvell SoC Family with device tree support @@ -577,7 +578,7 @@ config ARCH_DOVE select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select NEED_MACH_IO_H - select PLAT_ORION + select PLAT_ORION_LEGACY help Support for the Marvell Dove SoC 88AP510 @@ -588,7 +589,7 @@ config ARCH_KIRKWOOD select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select NEED_MACH_IO_H - select PLAT_ORION + select PLAT_ORION_LEGACY help Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. @@ -615,7 +616,7 @@ config ARCH_MV78XX0 select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select NEED_MACH_IO_H - select PLAT_ORION + select PLAT_ORION_LEGACY help Support for the following Marvell MV78xx0 series SoCs: MV781x0, MV782x0. @@ -628,7 +629,7 @@ config ARCH_ORION5X select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select NEED_MACH_IO_H - select PLAT_ORION + select PLAT_ORION_LEGACY help Support for the following Marvell Orion 5x series SoCs: Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), @@ -1148,6 +1149,10 @@ config PLAT_ORION select IRQ_DOMAIN select COMMON_CLK +config PLAT_ORION_LEGACY + bool + select PLAT_ORION + config PLAT_PXA bool diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index c20ce0f..1251e5b 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -2,9 +2,8 @@ # Makefile for the linux kernel. # -obj-y := irq.o pcie.o time.o common.o mpp.o addr-map.o -obj-m := -obj-n := -obj- := +obj-y += addr-map.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o +orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o +obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o +obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y) -- cgit v0.10.2 From 87d136415c78c02680dc474cb4093ba7911b07a4 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:28 +0200 Subject: arm: plat-orion: make bridge_virt_base non-const to support DT use case For the Armada 370 and XP SoCs where the DT is used, we need to fill at runtime the bridge_virt_base field on the orion_addr_map_cfg. Therefore, remove the 'const' qualifier on this field. Signed-off-by: Thomas Petazzoni Acked-by: Gregory CLEMENT Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h index 0a746fd..ec63e4a 100644 --- a/arch/arm/plat-orion/include/plat/addr-map.h +++ b/arch/arm/plat-orion/include/plat/addr-map.h @@ -16,7 +16,7 @@ extern struct mbus_dram_target_info orion_mbus_dram_info; struct orion_addr_map_cfg { const int num_wins; /* Total number of windows */ const int remappable_wins; - void __iomem * const bridge_virt_base; + void __iomem *bridge_virt_base; /* If NULL, the default cpu_win_can_remap will be used, using the value in remappable_wins */ -- cgit v0.10.2 From 74dd80a7b9fe5e8438458bd17cc9352dff8fd6b7 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:29 +0200 Subject: arm: mvebu: add basic address decoding support to Armada 370/XP This commit adds basic support for address decoding configuration for the Armada 370 and Armada XP SoCs, re-using the infrastructure provided in plat-orion. For now, only a BootROM window is configured on Armada XP, which is needed to get the non-boot CPUs started and is therefore a requirement for SMP support. Signed-off-by: Thomas Petazzoni Acked-by: Gregory CLEMENT Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index e61d2b8..2143558 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -1,2 +1,2 @@ obj-y += system-controller.o -obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o +obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o diff --git a/arch/arm/mach-mvebu/addr-map.c b/arch/arm/mach-mvebu/addr-map.c new file mode 100644 index 0000000..fe454a4 --- /dev/null +++ b/arch/arm/mach-mvebu/addr-map.c @@ -0,0 +1,134 @@ +/* + * Address map functions for Marvell 370 / XP SoCs + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* + * Generic Address Decode Windows bit settings + */ +#define ARMADA_XP_TARGET_DEV_BUS 1 +#define ARMADA_XP_ATTR_DEV_BOOTROM 0x1D +#define ARMADA_XP_TARGET_ETH1 3 +#define ARMADA_XP_TARGET_PCIE_0_2 4 +#define ARMADA_XP_TARGET_ETH0 7 +#define ARMADA_XP_TARGET_PCIE_1_3 8 + +#define ARMADA_370_TARGET_DEV_BUS 1 +#define ARMADA_370_ATTR_DEV_BOOTROM 0x1D +#define ARMADA_370_TARGET_PCIE_0 4 +#define ARMADA_370_TARGET_PCIE_1 8 + +#define ARMADA_WINDOW_8_PLUS_OFFSET 0x90 +#define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180 + +static const struct __initdata orion_addr_map_info +armada_xp_addr_map_info[] = { + /* + * Window for the BootROM, needed for SMP on Armada XP + */ + { 0, 0xfff00000, SZ_1M, ARMADA_XP_TARGET_DEV_BUS, + ARMADA_XP_ATTR_DEV_BOOTROM, -1 }, + /* End marker */ + { -1, 0, 0, 0, 0, 0 }, +}; + +static const struct __initdata orion_addr_map_info +armada_370_addr_map_info[] = { + /* End marker */ + { -1, 0, 0, 0, 0, 0 }, +}; + +static struct of_device_id of_addr_decoding_controller_table[] = { + { .compatible = "marvell,armada-addr-decoding-controller" }, + { /* end of list */ }, +}; + +static void __iomem * +armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win) +{ + unsigned int offset; + + /* The register layout is a bit annoying and the below code + * tries to cope with it. + * - At offset 0x0, there are the registers for the first 8 + * windows, with 4 registers of 32 bits per window (ctrl, + * base, remap low, remap high) + * - Then at offset 0x80, there is a hole of 0x10 bytes for + * the internal registers base address and internal units + * sync barrier register. + * - Then at offset 0x90, there the registers for 12 + * windows, with only 2 registers of 32 bits per window + * (ctrl, base). + */ + if (win < 8) + offset = (win << 4); + else + offset = ARMADA_WINDOW_8_PLUS_OFFSET + (win << 3); + + return cfg->bridge_virt_base + offset; +} + +static struct __initdata orion_addr_map_cfg addr_map_cfg = { + .num_wins = 20, + .remappable_wins = 8, + .win_cfg_base = armada_cfg_base, +}; + +static int __init armada_setup_cpu_mbus(void) +{ + struct device_node *np; + void __iomem *mbus_unit_addr_decoding_base; + void __iomem *sdram_addr_decoding_base; + + np = of_find_matching_node(NULL, of_addr_decoding_controller_table); + if (!np) + return -ENODEV; + + mbus_unit_addr_decoding_base = of_iomap(np, 0); + BUG_ON(!mbus_unit_addr_decoding_base); + + sdram_addr_decoding_base = + mbus_unit_addr_decoding_base + + ARMADA_SDRAM_ADDR_DECODING_OFFSET; + + addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base; + + /* + * Disable, clear and configure windows. + */ + if (of_machine_is_compatible("marvell,armadaxp")) + orion_config_wins(&addr_map_cfg, armada_xp_addr_map_info); + else if (of_machine_is_compatible("marvell,armada370")) + orion_config_wins(&addr_map_cfg, armada_370_addr_map_info); + else { + pr_err("Unsupported SoC\n"); + return -EINVAL; + } + + /* + * Setup MBUS dram target info. + */ + orion_setup_cpu_mbus_target(&addr_map_cfg, + sdram_addr_decoding_base); + return 0; +} + +/* Using a early_initcall is needed so that this initialization gets + * done before the SMP initialization, which requires the BootROM to + * be remapped. */ +early_initcall(armada_setup_cpu_mbus); -- cgit v0.10.2 From 5b40baee4a39d96d4d6a48a2b2383982912c429b Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:30 +0200 Subject: arm: mvebu: add address decoding controller to the DT Signed-off-by: Thomas Petazzoni Acked-by: Gregory CLEMENT Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 6b6b932..16cc82c 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -63,6 +63,11 @@ reg = <0xd0020300 0x30>; interrupts = <37>, <38>, <39>, <40>; }; + + addr-decoding@d0020000 { + compatible = "marvell,armada-addr-decoding-controller"; + reg = <0xd0020000 0x258>; + }; }; }; -- cgit v0.10.2 From 7e53018ef18f6ae67cdc63cd79ef9fcb80e342c6 Mon Sep 17 00:00:00 2001 From: Jason Cooper Date: Tue, 28 Aug 2012 23:24:24 +0000 Subject: ARM: Kirkwood: update defconfig Signed-off-by: Jason Cooper diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index aeb3af5..5a494a3 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,5 +1,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=19 CONFIG_PROFILING=y CONFIG_OPROFILE=y @@ -15,9 +17,9 @@ CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_ESATA_SHEEVAPLUG=y CONFIG_MACH_GURUPLUG=y -CONFIG_MACH_DOCKSTAR=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y +CONFIG_MACH_DOCKSTAR=y CONFIG_MACH_OPENRD_BASE=y CONFIG_MACH_OPENRD_CLIENT=y CONFIG_MACH_OPENRD_ULTIMATE=y @@ -29,8 +31,6 @@ CONFIG_MACH_NET2BIG_V2=y CONFIG_MACH_NET5BIG_V2=y CONFIG_MACH_T5325=y # CONFIG_CPU_FEROCEON_OLD_ID is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set @@ -47,13 +47,11 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -69,7 +67,6 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ORION=y CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m @@ -78,22 +75,20 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_NET_PCI=y +CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_MV643XX_ETH=y -# CONFIG_NETDEV_10000 is not set +CONFIG_MARVELL_PHY=y CONFIG_LIBERTAS=y CONFIG_LIBERTAS_SDIO=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set +CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set @@ -103,7 +98,6 @@ CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y CONFIG_HID_TWINHAN=y @@ -119,10 +113,8 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DATAFAB=y @@ -148,7 +140,6 @@ CONFIG_MV_XOR=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -158,7 +149,6 @@ CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y @@ -171,11 +161,8 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m -- cgit v0.10.2 From f98a4e2e8d50fe4b5ca6e8adac7e3161a47d29da Mon Sep 17 00:00:00 2001 From: Jason Cooper Date: Tue, 28 Aug 2012 23:27:39 +0000 Subject: ARM: Kirkwood: add DT boards to defconfig Also, enable SERIAL_OF_PLATFORM and ORION_WATCHDOG Signed-off-by: Jason Cooper diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 5a494a3..74eee0c 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -17,6 +17,16 @@ CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_ESATA_SHEEVAPLUG=y CONFIG_MACH_GURUPLUG=y +CONFIG_MACH_DREAMPLUG_DT=y +CONFIG_MACH_ICONNECT_DT=y +CONFIG_MACH_DLINK_KIRKWOOD_DT=y +CONFIG_MACH_IB62X0_DT=y +CONFIG_MACH_TS219_DT=y +CONFIG_MACH_DOCKSTAR_DT=y +CONFIG_MACH_GOFLEXNET_DT=y +CONFIG_MACH_LSXL_DT=y +CONFIG_MACH_IOMEGA_IX2_200_DT=y +CONFIG_MACH_KM_KIRKWOOD_DT=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y CONFIG_MACH_DOCKSTAR=y @@ -89,6 +99,7 @@ CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set @@ -98,6 +109,8 @@ CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_ORION_WATCHDOG=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y CONFIG_HID_TWINHAN=y -- cgit v0.10.2 From 17ba0226b9e88cf6ee506986befadfab70ebc6c8 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Sun, 5 Aug 2012 22:39:12 +0200 Subject: ARM: Kirkwood: Describe iconnect keys in DT. Define the 2 keys found on iconnect in DT. It's also changing the keycodes/ switches to use better ones. Signed-off-by: Arnaud Patard Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index f8ca6fa..3a5219c 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -69,4 +69,22 @@ gpios = <&gpio1 16 0>; }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "OTB Button"; + linux,code = <133>; + gpios = <&gpio1 3 1>; + debounce-interval = <100>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 12 1>; + debounce-interval = <100>; + }; + }; }; diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index d7a9198..51728db 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -19,8 +19,6 @@ #include #include #include -#include -#include #include #include #include "common.h" @@ -52,40 +50,6 @@ static struct mtd_partition iconnect_nand_parts[] = { }, }; -/* yikes... theses are the original input buttons */ -/* but I'm not convinced by the sw event choices */ -static struct gpio_keys_button iconnect_buttons[] = { - { - .type = EV_SW, - .code = SW_LID, - .gpio = 12, - .desc = "Reset Button", - .active_low = 1, - .debounce_interval = 100, - }, { - .type = EV_SW, - .code = SW_TABLET_MODE, - .gpio = 35, - .desc = "OTB Button", - .active_low = 1, - .debounce_interval = 100, - }, -}; - -static struct gpio_keys_platform_data iconnect_button_data = { - .buttons = iconnect_buttons, - .nbuttons = ARRAY_SIZE(iconnect_buttons), -}; - -static struct platform_device iconnect_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &iconnect_button_data, - }, -}; - void __init iconnect_init(void) { kirkwood_mpp_conf(iconnect_mpp_config); @@ -93,8 +57,6 @@ void __init iconnect_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&iconnect_ge00_data); - - platform_device_register(&iconnect_button_device); } static int __init iconnect_pci_init(void) -- cgit v0.10.2 From 2eecb477765840c175133117010a789e58824680 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Sun, 5 Aug 2012 22:39:13 +0200 Subject: ARM: Kirkwood: Describe iconnect nand in DT. Define the nand and its partitions in DT and remove them from cmdline Signed-off-by: Arnaud Patard Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 3a5219c..d97cd9d 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -12,7 +12,7 @@ }; chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)"; + bootargs = "console=ttyS0,115200n8 earlyprintk"; linux,initrd-start = <0x4500040>; linux,initrd-end = <0x4800000>; }; @@ -30,7 +30,37 @@ clock-frequency = <200000000>; status = "ok"; }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0xc0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + }; + + partition@100000 { + label = "zImage"; + reg = <0x100000 0x300000>; + }; + + partition@540000 { + label = "initrd"; + reg = <0x540000 0x300000>; + }; + + partition@980000 { + label = "boot"; + reg = <0x980000 0x1f400000>; + }; + }; }; + gpio-leds { compatible = "gpio-leds"; diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index 51728db..d084b1e 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include @@ -42,18 +41,9 @@ static unsigned int iconnect_mpp_config[] __initdata = { 0 }; -static struct mtd_partition iconnect_nand_parts[] = { - { - .name = "flash", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - void __init iconnect_init(void) { kirkwood_mpp_conf(iconnect_mpp_config); - kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25); kirkwood_ehci_init(); kirkwood_ge00_init(&iconnect_ge00_data); -- cgit v0.10.2 From f37fbd36c5f9fe716ddf783415a67de03fb0dc3d Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 3 Sep 2012 20:29:34 +0200 Subject: Crypto: CESA: Add support for DT based instantiation. Based on work by Michael Walle and Jason Cooper. Added support for getting the interrupt number and address of SRAM from DT. Signed-off-by: Andrew Lunn Tested-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper Conflicts: arch/arm/mach-kirkwood/board-dt.c diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt new file mode 100644 index 0000000..47229b1 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt @@ -0,0 +1,20 @@ +Marvell Cryptographic Engines And Security Accelerator + +Required properties: +- compatible : should be "marvell,orion-crypto" +- reg : base physical address of the engine and length of memory mapped + region, followed by base physical address of sram and its memory + length +- reg-names : "regs" , "sram"; +- interrupts : interrupt number + +Examples: + + crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0x4000000 0x800>; + reg-names = "regs" , "sram"; + interrupts = <22>; + status = "okay"; + }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index cef9616..4e5b815 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -14,7 +14,8 @@ ocp@f1000000 { compatible = "simple-bus"; - ranges = <0 0xf1000000 0x4000000>; + ranges = <0x00000000 0xf1000000 0x4000000 + 0xf5000000 0xf5000000 0x0000400>; #address-cells = <1>; #size-cells = <1>; @@ -105,5 +106,14 @@ clock-frequency = <100000>; status = "disabled"; }; + + crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0xf5000000 0x800>; + reg-names = "regs", "sram"; + interrupts = <22>; + status = "okay"; + }; }; }; diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index e4eb450..0d51901 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -33,6 +33,7 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL), + OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL), {}, }; @@ -60,7 +61,6 @@ static void __init kirkwood_dt_init(void) /* internal devices that every board has */ kirkwood_xor0_init(); kirkwood_xor1_init(); - kirkwood_crypto_init(); #ifdef CONFIG_KEXEC kexec_reinit = kirkwood_enable_pcie; diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c index 21c1a87..24ccae4 100644 --- a/drivers/crypto/mv_cesa.c +++ b/drivers/crypto/mv_cesa.c @@ -19,6 +19,9 @@ #include #include #include +#include +#include +#include #include "mv_cesa.h" @@ -1062,7 +1065,10 @@ static int mv_probe(struct platform_device *pdev) goto err_unmap_reg; } - irq = platform_get_irq(pdev, 0); + if (pdev->dev.of_node) + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + else + irq = platform_get_irq(pdev, 0); if (irq < 0 || irq == NO_IRQ) { ret = irq; goto err_unmap_sram; @@ -1170,12 +1176,19 @@ static int mv_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id mv_cesa_of_match_table[] = { + { .compatible = "marvell,orion-crypto", }, + {} +}; +MODULE_DEVICE_TABLE(of, mv_cesa_of_match_table); + static struct platform_driver marvell_crypto = { .probe = mv_probe, - .remove = mv_remove, + .remove = __devexit_p(mv_remove), .driver = { .owner = THIS_MODULE, .name = "mv_crypto", + .of_match_table = of_match_ptr(mv_cesa_of_match_table), }, }; MODULE_ALIAS("platform:mv_crypto"); -- cgit v0.10.2 From 55fb8b06813b190a9366fee396fac109638a9c9d Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Fri, 14 Sep 2012 17:07:06 +0100 Subject: hwmon: Add devicetree bindings to gpio-fan Allow a gpio-fan to be defined in devicetree, see binding documentation for details. Signed-off-by: Jamie Lentin Acked-by: Andrew Lunn Acked-by: Guenter Roeck Signed-off-by: Jason Cooper diff --git a/Documentation/devicetree/bindings/gpio/gpio-fan.txt b/Documentation/devicetree/bindings/gpio/gpio-fan.txt new file mode 100644 index 0000000..2dd457a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-fan.txt @@ -0,0 +1,25 @@ +Bindings for fan connected to GPIO lines + +Required properties: +- compatible : "gpio-fan" +- gpios: Specifies the pins that map to bits in the control value, + ordered MSB-->LSB. +- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the + control value that should be set to achieve them. This array + must have the RPM values in ascending order. + +Optional properties: +- alarm-gpios: This pin going active indicates something is wrong with + the fan, and a udev event will be fired. + +Examples: + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio1 14 1 + &gpio1 13 1>; + gpio-fan,speed-map = <0 0 + 3000 1 + 6000 2>; + alarm-gpios = <&gpio1 15 1>; + }; diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c index 2f4b01b..36509ae 100644 --- a/drivers/hwmon/gpio-fan.c +++ b/drivers/hwmon/gpio-fan.c @@ -31,6 +31,8 @@ #include #include #include +#include +#include struct gpio_fan_data { struct platform_device *pdev; @@ -400,14 +402,131 @@ static ssize_t show_name(struct device *dev, static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +#ifdef CONFIG_OF_GPIO +/* + * Translate OpenFirmware node properties into platform_data + */ +static int gpio_fan_get_of_pdata(struct device *dev, + struct gpio_fan_platform_data *pdata) +{ + struct device_node *node; + struct gpio_fan_speed *speed; + unsigned *ctrl; + unsigned i; + u32 u; + struct property *prop; + const __be32 *p; + + node = dev->of_node; + + /* Fill GPIO pin array */ + pdata->num_ctrl = of_gpio_count(node); + if (!pdata->num_ctrl) { + dev_err(dev, "gpios DT property empty / missing"); + return -ENODEV; + } + ctrl = devm_kzalloc(dev, pdata->num_ctrl * sizeof(unsigned), + GFP_KERNEL); + if (!ctrl) + return -ENOMEM; + for (i = 0; i < pdata->num_ctrl; i++) { + int val; + + val = of_get_gpio(node, i); + if (val < 0) + return val; + ctrl[i] = val; + } + pdata->ctrl = ctrl; + + /* Get number of RPM/ctrl_val pairs in speed map */ + prop = of_find_property(node, "gpio-fan,speed-map", &i); + if (!prop) { + dev_err(dev, "gpio-fan,speed-map DT property missing"); + return -ENODEV; + } + i = i / sizeof(u32); + if (i == 0 || i & 1) { + dev_err(dev, "gpio-fan,speed-map contains zero/odd number of entries"); + return -ENODEV; + } + pdata->num_speed = i / 2; + + /* + * Populate speed map + * Speed map is in the form + * this needs splitting into pairs to create gpio_fan_speed structs + */ + speed = devm_kzalloc(dev, + pdata->num_speed * sizeof(struct gpio_fan_speed), + GFP_KERNEL); + if (!speed) + return -ENOMEM; + p = NULL; + for (i = 0; i < pdata->num_speed; i++) { + p = of_prop_next_u32(prop, p, &u); + if (!p) + return -ENODEV; + speed[i].rpm = u; + p = of_prop_next_u32(prop, p, &u); + if (!p) + return -ENODEV; + speed[i].ctrl_val = u; + } + pdata->speed = speed; + + /* Alarm GPIO if one exists */ + if (of_gpio_named_count(node, "alarm-gpios")) { + struct gpio_fan_alarm *alarm; + int val; + enum of_gpio_flags flags; + + alarm = devm_kzalloc(dev, sizeof(struct gpio_fan_alarm), + GFP_KERNEL); + if (!alarm) + return -ENOMEM; + + val = of_get_named_gpio_flags(node, "alarm-gpios", 0, &flags); + if (val < 0) + return val; + alarm->gpio = val; + alarm->active_low = flags & OF_GPIO_ACTIVE_LOW; + + pdata->alarm = alarm; + } + + return 0; +} + +static struct of_device_id of_gpio_fan_match[] __devinitdata = { + { .compatible = "gpio-fan", }, + {}, +}; +#endif /* CONFIG_OF_GPIO */ + static int __devinit gpio_fan_probe(struct platform_device *pdev) { int err; struct gpio_fan_data *fan_data; struct gpio_fan_platform_data *pdata = pdev->dev.platform_data; +#ifdef CONFIG_OF_GPIO + if (!pdata) { + pdata = devm_kzalloc(&pdev->dev, + sizeof(struct gpio_fan_platform_data), + GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + err = gpio_fan_get_of_pdata(&pdev->dev, pdata); + if (err) + return err; + } +#else /* CONFIG_OF_GPIO */ if (!pdata) return -EINVAL; +#endif /* CONFIG_OF_GPIO */ fan_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_fan_data), GFP_KERNEL); @@ -511,6 +630,7 @@ static struct platform_driver gpio_fan_driver = { .driver = { .name = "gpio-fan", .pm = GPIO_FAN_PM, + .of_match_table = of_match_ptr(of_gpio_fan_match), }, }; -- cgit v0.10.2 From 1b90e06b14291ce3c252bd10e4ce981a08152e2e Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Mon, 10 Sep 2012 14:51:52 +0100 Subject: ARM: kirkwood: Use devicetree to define DNS-32[05] fan Remove more board-specific code by using devicetree to define the fan attached to both boards. Signed-off-by: Jamie Lentin Acked-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 7408655..9b32d02 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -25,6 +25,16 @@ }; }; + gpio_fan { + /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ + compatible = "gpio-fan"; + gpios = <&gpio1 14 1 + &gpio1 13 1>; + gpio-fan,speed-map = <0 0 + 3000 1 + 6000 2>; + }; + ocp@f1000000 { sata@80000 { status = "okay"; diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 4ab3506..6ac7a8d 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -67,29 +66,6 @@ static unsigned int dnskw_mpp_config[] __initdata = { 0 }; -/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ -static struct gpio_fan_speed dnskw_fan_speed[] = { - { 0, 0 }, - { 3000, 1 }, - { 6000, 2 }, -}; -static unsigned dnskw_fan_pins[] = {46, 45}; - -static struct gpio_fan_platform_data dnskw_fan_data = { - .num_ctrl = ARRAY_SIZE(dnskw_fan_pins), - .ctrl = dnskw_fan_pins, - .num_speed = ARRAY_SIZE(dnskw_fan_speed), - .speed = dnskw_fan_speed, -}; - -static struct platform_device dnskw_fan_device = { - .name = "gpio-fan", - .id = -1, - .dev = { - .platform_data = &dnskw_fan_data, - }, -}; - static void dnskw_power_off(void) { gpio_set_value(36, 1); @@ -114,8 +90,6 @@ void __init dnskw_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&dnskw_ge00_data); - platform_device_register(&dnskw_fan_device); - /* Register power-off GPIO. */ if (gpio_request(36, "dnskw:power:off") == 0 && gpio_direction_output(36, 0) == 0) -- cgit v0.10.2 From 7e8d941567c99a03390154a7bb116d1b03db82b3 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 13 Sep 2012 17:41:43 +0200 Subject: pinctrl: mvebu: pinctrl driver core This patch adds a pinctrl driver core for Marvell SoCs plus DT binding documentation. This core driver will be used by SoC family specific drivers, i.e. Armada XP, Armada 370, Dove, Kirkwood, aso. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Thomas Petazzoni Acked-by: Thomas Petazzoni Tested-by: Thomas Petazzoni Reviewed-by: Stephen Warren Signed-off-by: Jason Cooper Conflicts: arch/arm/Kconfig diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt new file mode 100644 index 0000000..0a26c3a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt @@ -0,0 +1,46 @@ +* Marvell SoC pinctrl core driver for mpp + +The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins +(mpp) to a specific function. For each SoC family there is a SoC specific +driver using this core driver. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +A Marvell SoC pin configuration node is a node of a group of pins which can +be used for a specific device or function. Each node requires one or more +mpp pins or group of pins and a mpp function common to all pins. + +Required properties for pinctrl driver: +- compatible: "marvell,-pinctrl" + Please refer to each marvell,-pinctrl.txt binding doc for supported SoCs. + +Required properties for pin configuration node: +- marvell,pins: string array of mpp pins or group of pins to be muxed. +- marvell,function: string representing a function to mux to for all + marvell,pins given in this pin configuration node. The function has to be + common for all marvell,pins. Please refer to marvell,-pinctrl.txt for + valid pin/pin group names and available function names for each SoC. + +Examples: + +uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <7>; + + pinctrl-0 = <&pmx_uart1_sw>; + pinctrl-names = "default"; +}; + +pinctrl: pinctrl@d0200 { + compatible = "marvell,dove-pinctrl"; + reg = <0xd0200 0x20>; + + pmx_uart1_sw: pmx-uart1-sw { + marvell,pins = "mpp_uart1"; + marvell,function = "uart1"; + }; +}; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a4eab57..4b30724 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -568,6 +568,7 @@ config ARCH_MVEBU select IRQ_DOMAIN select COMMON_CLK select PLAT_ORION + select PINCTRL help Support for the Marvell SoC Family with device tree support diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 54e3588..20bfdc3 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -145,6 +145,12 @@ config PINCTRL_COH901 COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 ports of 8 GPIO pins each. +config PINCTRL_MVEBU + bool + depends on ARCH_MVEBU + select PINMUX + select PINCONF + source "drivers/pinctrl/spear/Kconfig" endmenu diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index f40b1f8..007ed32 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -29,5 +29,6 @@ obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o +obj-$(CONFIG_PINCTRL_MVEBU) += pinctrl-mvebu.o obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/pinctrl/pinctrl-mvebu.c b/drivers/pinctrl/pinctrl-mvebu.c new file mode 100644 index 0000000..8e6266c --- /dev/null +++ b/drivers/pinctrl/pinctrl-mvebu.c @@ -0,0 +1,754 @@ +/* + * Marvell MVEBU pinctrl core driver + * + * Authors: Sebastian Hesselbarth + * Thomas Petazzoni + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "core.h" +#include "pinctrl-mvebu.h" + +#define MPPS_PER_REG 8 +#define MPP_BITS 4 +#define MPP_MASK 0xf + +struct mvebu_pinctrl_function { + const char *name; + const char **groups; + unsigned num_groups; +}; + +struct mvebu_pinctrl_group { + const char *name; + struct mvebu_mpp_ctrl *ctrl; + struct mvebu_mpp_ctrl_setting *settings; + unsigned num_settings; + unsigned gid; + unsigned *pins; + unsigned npins; +}; + +struct mvebu_pinctrl { + struct device *dev; + struct pinctrl_dev *pctldev; + struct pinctrl_desc desc; + void __iomem *base; + struct mvebu_pinctrl_group *groups; + unsigned num_groups; + struct mvebu_pinctrl_function *functions; + unsigned num_functions; + u8 variant; +}; + +static struct mvebu_pinctrl_group *mvebu_pinctrl_find_group_by_pid( + struct mvebu_pinctrl *pctl, unsigned pid) +{ + unsigned n; + for (n = 0; n < pctl->num_groups; n++) { + if (pid >= pctl->groups[n].pins[0] && + pid < pctl->groups[n].pins[0] + + pctl->groups[n].npins) + return &pctl->groups[n]; + } + return NULL; +} + +static struct mvebu_pinctrl_group *mvebu_pinctrl_find_group_by_name( + struct mvebu_pinctrl *pctl, const char *name) +{ + unsigned n; + for (n = 0; n < pctl->num_groups; n++) { + if (strcmp(name, pctl->groups[n].name) == 0) + return &pctl->groups[n]; + } + return NULL; +} + +static struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_setting_by_val( + struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp, + unsigned long config) +{ + unsigned n; + for (n = 0; n < grp->num_settings; n++) { + if (config == grp->settings[n].val) { + if (!pctl->variant || (pctl->variant & + grp->settings[n].variant)) + return &grp->settings[n]; + } + } + return NULL; +} + +static struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_setting_by_name( + struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp, + const char *name) +{ + unsigned n; + for (n = 0; n < grp->num_settings; n++) { + if (strcmp(name, grp->settings[n].name) == 0) { + if (!pctl->variant || (pctl->variant & + grp->settings[n].variant)) + return &grp->settings[n]; + } + } + return NULL; +} + +static struct mvebu_mpp_ctrl_setting *mvebu_pinctrl_find_gpio_setting( + struct mvebu_pinctrl *pctl, struct mvebu_pinctrl_group *grp) +{ + unsigned n; + for (n = 0; n < grp->num_settings; n++) { + if (grp->settings[n].flags & + (MVEBU_SETTING_GPO | MVEBU_SETTING_GPI)) { + if (!pctl->variant || (pctl->variant & + grp->settings[n].variant)) + return &grp->settings[n]; + } + } + return NULL; +} + +static struct mvebu_pinctrl_function *mvebu_pinctrl_find_function_by_name( + struct mvebu_pinctrl *pctl, const char *name) +{ + unsigned n; + for (n = 0; n < pctl->num_functions; n++) { + if (strcmp(name, pctl->functions[n].name) == 0) + return &pctl->functions[n]; + } + return NULL; +} + +/* + * Common mpp pin configuration registers on MVEBU are + * registers of eight 4-bit values for each mpp setting. + * Register offset and bit mask are calculated accordingly below. + */ +static int mvebu_common_mpp_get(struct mvebu_pinctrl *pctl, + struct mvebu_pinctrl_group *grp, + unsigned long *config) +{ + unsigned pin = grp->gid; + unsigned off = (pin / MPPS_PER_REG) * MPP_BITS; + unsigned shift = (pin % MPPS_PER_REG) * MPP_BITS; + + *config = readl(pctl->base + off); + *config >>= shift; + *config &= MPP_MASK; + + return 0; +} + +static int mvebu_common_mpp_set(struct mvebu_pinctrl *pctl, + struct mvebu_pinctrl_group *grp, + unsigned long config) +{ + unsigned pin = grp->gid; + unsigned off = (pin / MPPS_PER_REG) * MPP_BITS; + unsigned shift = (pin % MPPS_PER_REG) * MPP_BITS; + unsigned long reg; + + reg = readl(pctl->base + off); + reg &= ~(MPP_MASK << shift); + reg |= (config << shift); + writel(reg, pctl->base + off); + + return 0; +} + +static int mvebu_pinconf_group_get(struct pinctrl_dev *pctldev, + unsigned gid, unsigned long *config) +{ + struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + struct mvebu_pinctrl_group *grp = &pctl->groups[gid]; + + if (!grp->ctrl) + return -EINVAL; + + if (grp->ctrl->mpp_get) + return grp->ctrl->mpp_get(grp->ctrl, config); + + return mvebu_common_mpp_get(pctl, grp, config); +} + +static int mvebu_pinconf_group_set(struct pinctrl_dev *pctldev, + unsigned gid, unsigned long config) +{ + struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + struct mvebu_pinctrl_group *grp = &pctl->groups[gid]; + + if (!grp->ctrl) + return -EINVAL; + + if (grp->ctrl->mpp_set) + return grp->ctrl->mpp_set(grp->ctrl, config); + + return mvebu_common_mpp_set(pctl, grp, config); +} + +static void mvebu_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned gid) +{ + struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + struct mvebu_pinctrl_group *grp = &pctl->groups[gid]; + struct mvebu_mpp_ctrl_setting *curr; + unsigned long config; + unsigned n; + + if (mvebu_pinconf_group_get(pctldev, gid, &config)) + return; + + curr = mvebu_pinctrl_find_setting_by_val(pctl, grp, config); + + if (curr) { + seq_printf(s, "current: %s", curr->name); + if (curr->subname) + seq_printf(s, "(%s)", curr->subname); + if (curr->flags & (MVEBU_SETTING_GPO | MVEBU_SETTING_GPI)) { + seq_printf(s, "("); + if (curr->flags & MVEBU_SETTING_GPI) + seq_printf(s, "i"); + if (curr->flags & MVEBU_SETTING_GPO) + seq_printf(s, "o"); + seq_printf(s, ")"); + } + } else + seq_printf(s, "current: UNKNOWN"); + + if (grp->num_settings > 1) { + seq_printf(s, ", available = ["); + for (n = 0; n < grp->num_settings; n++) { + if (curr == &grp->settings[n]) + continue; + + /* skip unsupported settings for this variant */ + if (pctl->variant && + !(pctl->variant & grp->settings[n].variant)) + continue; + + seq_printf(s, " %s", grp->settings[n].name); + if (grp->settings[n].subname) + seq_printf(s, "(%s)", grp->settings[n].subname); + if (grp->settings[n].flags & + (MVEBU_SETTING_GPO | MVEBU_SETTING_GPI)) { + seq_printf(s, "("); + if (grp->settings[n].flags & MVEBU_SETTING_GPI) + seq_printf(s, "i"); + if (grp->settings[n].flags & MVEBU_SETTING_GPO) + seq_printf(s, "o"); + seq_printf(s, ")"); + } + } + seq_printf(s, " ]"); + } + return; +} + +static struct pinconf_ops mvebu_pinconf_ops = { + .pin_config_group_get = mvebu_pinconf_group_get, + .pin_config_group_set = mvebu_pinconf_group_set, + .pin_config_group_dbg_show = mvebu_pinconf_group_dbg_show, +}; + +static int mvebu_pinmux_get_funcs_count(struct pinctrl_dev *pctldev) +{ + struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + + return pctl->num_functions; +} + +static const char *mvebu_pinmux_get_func_name(struct pinctrl_dev *pctldev, + unsigned fid) +{ + struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + + return pctl->functions[fid].name; +} + +static int mvebu_pinmux_get_groups(struct pinctrl_dev *pctldev, unsigned fid, + const char * const **groups, + unsigned * const num_groups) +{ + struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + + *groups = pctl->functions[fid].groups; + *num_groups = pctl->functions[fid].num_groups; + return 0; +} + +static int mvebu_pinmux_enable(struct pinctrl_dev *pctldev, unsigned fid, + unsigned gid) +{ + struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + struct mvebu_pinctrl_function *func = &pctl->functions[fid]; + struct mvebu_pinctrl_group *grp = &pctl->groups[gid]; + struct mvebu_mpp_ctrl_setting *setting; + int ret; + + setting = mvebu_pinctrl_find_setting_by_name(pctl, grp, + func->name); + if (!setting) { + dev_err(pctl->dev, + "unable to find setting %s in group %s\n", + func->name, func->groups[gid]); + return -EINVAL; + } + + ret = mvebu_pinconf_group_set(pctldev, grp->gid, setting->val); + if (ret) { + dev_err(pctl->dev, "cannot set group %s to %s\n", + func->groups[gid], func->name); + return ret; + } + + return 0; +} + +static int mvebu_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, unsigned offset) +{ + struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + struct mvebu_pinctrl_group *grp; + struct mvebu_mpp_ctrl_setting *setting; + + grp = mvebu_pinctrl_find_group_by_pid(pctl, offset); + if (!grp) + return -EINVAL; + + if (grp->ctrl->mpp_gpio_req) + return grp->ctrl->mpp_gpio_req(grp->ctrl, offset); + + setting = mvebu_pinctrl_find_gpio_setting(pctl, grp); + if (!setting) + return -ENOTSUPP; + + return mvebu_pinconf_group_set(pctldev, grp->gid, setting->val); +} + +static int mvebu_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, unsigned offset, bool input) +{ + struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + struct mvebu_pinctrl_group *grp; + struct mvebu_mpp_ctrl_setting *setting; + + grp = mvebu_pinctrl_find_group_by_pid(pctl, offset); + if (!grp) + return -EINVAL; + + if (grp->ctrl->mpp_gpio_dir) + return grp->ctrl->mpp_gpio_dir(grp->ctrl, offset, input); + + setting = mvebu_pinctrl_find_gpio_setting(pctl, grp); + if (!setting) + return -ENOTSUPP; + + if ((input && (setting->flags & MVEBU_SETTING_GPI)) || + (!input && (setting->flags & MVEBU_SETTING_GPO))) + return 0; + + return -ENOTSUPP; +} + +static struct pinmux_ops mvebu_pinmux_ops = { + .get_functions_count = mvebu_pinmux_get_funcs_count, + .get_function_name = mvebu_pinmux_get_func_name, + .get_function_groups = mvebu_pinmux_get_groups, + .gpio_request_enable = mvebu_pinmux_gpio_request_enable, + .gpio_set_direction = mvebu_pinmux_gpio_set_direction, + .enable = mvebu_pinmux_enable, +}; + +static int mvebu_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + return pctl->num_groups; +} + +static const char *mvebu_pinctrl_get_group_name(struct pinctrl_dev *pctldev, + unsigned gid) +{ + struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + return pctl->groups[gid].name; +} + +static int mvebu_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned gid, const unsigned **pins, + unsigned *num_pins) +{ + struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + *pins = pctl->groups[gid].pins; + *num_pins = pctl->groups[gid].npins; + return 0; +} + +static int mvebu_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, + unsigned *num_maps) +{ + struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + struct property *prop; + const char *function; + const char *group; + int ret, nmaps, n; + + *map = NULL; + *num_maps = 0; + + ret = of_property_read_string(np, "marvell,function", &function); + if (ret) { + dev_err(pctl->dev, + "missing marvell,function in node %s\n", np->name); + return 0; + } + + nmaps = of_property_count_strings(np, "marvell,pins"); + if (nmaps < 0) { + dev_err(pctl->dev, + "missing marvell,pins in node %s\n", np->name); + return 0; + } + + *map = kmalloc(nmaps * sizeof(struct pinctrl_map), GFP_KERNEL); + if (map == NULL) { + dev_err(pctl->dev, + "cannot allocate pinctrl_map memory for %s\n", + np->name); + return -ENOMEM; + } + + n = 0; + of_property_for_each_string(np, "marvell,pins", prop, group) { + struct mvebu_pinctrl_group *grp = + mvebu_pinctrl_find_group_by_name(pctl, group); + + if (!grp) { + dev_err(pctl->dev, "unknown pin %s", group); + continue; + } + + if (!mvebu_pinctrl_find_setting_by_name(pctl, grp, function)) { + dev_err(pctl->dev, "unsupported function %s on pin %s", + function, group); + continue; + } + + (*map)[n].type = PIN_MAP_TYPE_MUX_GROUP; + (*map)[n].data.mux.group = group; + (*map)[n].data.mux.function = function; + n++; + } + + *num_maps = nmaps; + + return 0; +} + +static void mvebu_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + kfree(map); +} + +static struct pinctrl_ops mvebu_pinctrl_ops = { + .get_groups_count = mvebu_pinctrl_get_groups_count, + .get_group_name = mvebu_pinctrl_get_group_name, + .get_group_pins = mvebu_pinctrl_get_group_pins, + .dt_node_to_map = mvebu_pinctrl_dt_node_to_map, + .dt_free_map = mvebu_pinctrl_dt_free_map, +}; + +static int __devinit _add_function(struct mvebu_pinctrl_function *funcs, + const char *name) +{ + while (funcs->num_groups) { + /* function already there */ + if (strcmp(funcs->name, name) == 0) { + funcs->num_groups++; + return -EEXIST; + } + funcs++; + } + funcs->name = name; + funcs->num_groups = 1; + return 0; +} + +static int __devinit mvebu_pinctrl_build_functions(struct platform_device *pdev, + struct mvebu_pinctrl *pctl) +{ + struct mvebu_pinctrl_function *funcs; + int num = 0; + int n, s; + + /* we allocate functions for number of pins and hope + * there are less unique functions than pins available */ + funcs = devm_kzalloc(&pdev->dev, pctl->desc.npins * + sizeof(struct mvebu_pinctrl_function), GFP_KERNEL); + if (!funcs) + return -ENOMEM; + + for (n = 0; n < pctl->num_groups; n++) { + struct mvebu_pinctrl_group *grp = &pctl->groups[n]; + for (s = 0; s < grp->num_settings; s++) { + /* skip unsupported settings on this variant */ + if (pctl->variant && + !(pctl->variant & grp->settings[s].variant)) + continue; + + /* check for unique functions and count groups */ + if (_add_function(funcs, grp->settings[s].name)) + continue; + + num++; + } + } + + /* with the number of unique functions and it's groups known, + reallocate functions and assign group names */ + funcs = krealloc(funcs, num * sizeof(struct mvebu_pinctrl_function), + GFP_KERNEL); + if (!funcs) + return -ENOMEM; + + pctl->num_functions = num; + pctl->functions = funcs; + + for (n = 0; n < pctl->num_groups; n++) { + struct mvebu_pinctrl_group *grp = &pctl->groups[n]; + for (s = 0; s < grp->num_settings; s++) { + struct mvebu_pinctrl_function *f; + const char **groups; + + /* skip unsupported settings on this variant */ + if (pctl->variant && + !(pctl->variant & grp->settings[s].variant)) + continue; + + f = mvebu_pinctrl_find_function_by_name(pctl, + grp->settings[s].name); + + /* allocate group name array if not done already */ + if (!f->groups) { + f->groups = devm_kzalloc(&pdev->dev, + f->num_groups * sizeof(char *), + GFP_KERNEL); + if (!f->groups) + return -ENOMEM; + } + + /* find next free group name and assign current name */ + groups = f->groups; + while (*groups) + groups++; + *groups = grp->name; + } + } + + return 0; +} + +int __devinit mvebu_pinctrl_probe(struct platform_device *pdev) +{ + struct mvebu_pinctrl_soc_info *soc = dev_get_platdata(&pdev->dev); + struct device_node *np = pdev->dev.of_node; + struct mvebu_pinctrl *pctl; + void __iomem *base; + struct pinctrl_pin_desc *pdesc; + unsigned gid, n, k; + int ret; + + if (!soc || !soc->controls || !soc->modes) { + dev_err(&pdev->dev, "wrong pinctrl soc info\n"); + return -EINVAL; + } + + base = of_iomap(np, 0); + if (!base) { + dev_err(&pdev->dev, "unable to get base address\n"); + return -ENODEV; + } + + pctl = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_pinctrl), + GFP_KERNEL); + if (!pctl) { + dev_err(&pdev->dev, "unable to alloc driver\n"); + return -ENOMEM; + } + + pctl->desc.name = dev_name(&pdev->dev); + pctl->desc.owner = THIS_MODULE; + pctl->desc.pctlops = &mvebu_pinctrl_ops; + pctl->desc.pmxops = &mvebu_pinmux_ops; + pctl->desc.confops = &mvebu_pinconf_ops; + pctl->variant = soc->variant; + pctl->base = base; + pctl->dev = &pdev->dev; + platform_set_drvdata(pdev, pctl); + + /* count controls and create names for mvebu generic + register controls; also does sanity checks */ + pctl->num_groups = 0; + pctl->desc.npins = 0; + for (n = 0; n < soc->ncontrols; n++) { + struct mvebu_mpp_ctrl *ctrl = &soc->controls[n]; + char *names; + + pctl->desc.npins += ctrl->npins; + /* initial control pins */ + for (k = 0; k < ctrl->npins; k++) + ctrl->pins[k] = ctrl->pid + k; + + /* special soc specific control */ + if (ctrl->mpp_get || ctrl->mpp_set) { + if (!ctrl->name || !ctrl->mpp_set || !ctrl->mpp_set) { + dev_err(&pdev->dev, "wrong soc control info\n"); + return -EINVAL; + } + pctl->num_groups += 1; + continue; + } + + /* generic mvebu register control */ + names = devm_kzalloc(&pdev->dev, ctrl->npins * 8, GFP_KERNEL); + if (!names) { + dev_err(&pdev->dev, "failed to alloc mpp names\n"); + return -ENOMEM; + } + for (k = 0; k < ctrl->npins; k++) + sprintf(names + 8*k, "mpp%d", ctrl->pid+k); + ctrl->name = names; + pctl->num_groups += ctrl->npins; + } + + pdesc = devm_kzalloc(&pdev->dev, pctl->desc.npins * + sizeof(struct pinctrl_pin_desc), GFP_KERNEL); + if (!pdesc) { + dev_err(&pdev->dev, "failed to alloc pinctrl pins\n"); + return -ENOMEM; + } + + for (n = 0; n < pctl->desc.npins; n++) + pdesc[n].number = n; + pctl->desc.pins = pdesc; + + pctl->groups = devm_kzalloc(&pdev->dev, pctl->num_groups * + sizeof(struct mvebu_pinctrl_group), GFP_KERNEL); + if (!pctl->groups) { + dev_err(&pdev->dev, "failed to alloc pinctrl groups\n"); + return -ENOMEM; + } + + /* assign mpp controls to groups */ + gid = 0; + for (n = 0; n < soc->ncontrols; n++) { + struct mvebu_mpp_ctrl *ctrl = &soc->controls[n]; + pctl->groups[gid].gid = gid; + pctl->groups[gid].ctrl = ctrl; + pctl->groups[gid].name = ctrl->name; + pctl->groups[gid].pins = ctrl->pins; + pctl->groups[gid].npins = ctrl->npins; + + /* generic mvebu register control maps to a number of groups */ + if (!ctrl->mpp_get && !ctrl->mpp_set) { + pctl->groups[gid].npins = 1; + + for (k = 1; k < ctrl->npins; k++) { + gid++; + pctl->groups[gid].gid = gid; + pctl->groups[gid].ctrl = ctrl; + pctl->groups[gid].name = &ctrl->name[8*k]; + pctl->groups[gid].pins = &ctrl->pins[k]; + pctl->groups[gid].npins = 1; + } + } + gid++; + } + + /* assign mpp modes to groups */ + for (n = 0; n < soc->nmodes; n++) { + struct mvebu_mpp_mode *mode = &soc->modes[n]; + struct mvebu_pinctrl_group *grp = + mvebu_pinctrl_find_group_by_pid(pctl, mode->pid); + unsigned num_settings; + + if (!grp) { + dev_warn(&pdev->dev, "unknown pinctrl group %d\n", + mode->pid); + continue; + } + + for (num_settings = 0; ;) { + struct mvebu_mpp_ctrl_setting *set = + &mode->settings[num_settings]; + + if (!set->name) + break; + num_settings++; + + /* skip unsupported settings for this variant */ + if (pctl->variant && !(pctl->variant & set->variant)) + continue; + + /* find gpio/gpo/gpi settings */ + if (strcmp(set->name, "gpio") == 0) + set->flags = MVEBU_SETTING_GPI | + MVEBU_SETTING_GPO; + else if (strcmp(set->name, "gpo") == 0) + set->flags = MVEBU_SETTING_GPO; + else if (strcmp(set->name, "gpi") == 0) + set->flags = MVEBU_SETTING_GPI; + } + + grp->settings = mode->settings; + grp->num_settings = num_settings; + } + + ret = mvebu_pinctrl_build_functions(pdev, pctl); + if (ret) { + dev_err(&pdev->dev, "unable to build functions\n"); + return ret; + } + + pctl->pctldev = pinctrl_register(&pctl->desc, &pdev->dev, pctl); + if (!pctl->pctldev) { + dev_err(&pdev->dev, "unable to register pinctrl driver\n"); + return -EINVAL; + } + + dev_info(&pdev->dev, "registered pinctrl driver\n"); + + /* register gpio ranges */ + for (n = 0; n < soc->ngpioranges; n++) + pinctrl_add_gpio_range(pctl->pctldev, &soc->gpioranges[n]); + + return 0; +} + +int __devexit mvebu_pinctrl_remove(struct platform_device *pdev) +{ + struct mvebu_pinctrl *pctl = platform_get_drvdata(pdev); + pinctrl_unregister(pctl->pctldev); + return 0; +} diff --git a/drivers/pinctrl/pinctrl-mvebu.h b/drivers/pinctrl/pinctrl-mvebu.h new file mode 100644 index 0000000..90bd3be --- /dev/null +++ b/drivers/pinctrl/pinctrl-mvebu.h @@ -0,0 +1,192 @@ +/* + * Marvell MVEBU pinctrl driver + * + * Authors: Sebastian Hesselbarth + * Thomas Petazzoni + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __PINCTRL_MVEBU_H__ +#define __PINCTRL_MVEBU_H__ + +/** + * struct mvebu_mpp_ctrl - describe a mpp control + * @name: name of the control group + * @pid: first pin id handled by this control + * @npins: number of pins controlled by this control + * @mpp_get: (optional) special function to get mpp setting + * @mpp_set: (optional) special function to set mpp setting + * @mpp_gpio_req: (optional) special function to request gpio + * @mpp_gpio_dir: (optional) special function to set gpio direction + * + * A mpp_ctrl describes a muxable unit, e.g. pin, group of pins, or + * internal function, inside the SoC. Each muxable unit can be switched + * between two or more different settings, e.g. assign mpp pin 13 to + * uart1 or sata. + * + * If optional mpp_get/_set functions are set these are used to get/set + * a specific mode. Otherwise it is assumed that the mpp control is based + * on 4-bit groups in subsequent registers. The optional mpp_gpio_req/_dir + * functions can be used to allow pin settings with varying gpio pins. + */ +struct mvebu_mpp_ctrl { + const char *name; + u8 pid; + u8 npins; + unsigned *pins; + int (*mpp_get)(struct mvebu_mpp_ctrl *ctrl, unsigned long *config); + int (*mpp_set)(struct mvebu_mpp_ctrl *ctrl, unsigned long config); + int (*mpp_gpio_req)(struct mvebu_mpp_ctrl *ctrl, u8 pid); + int (*mpp_gpio_dir)(struct mvebu_mpp_ctrl *ctrl, u8 pid, bool input); +}; + +/** + * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting + * @val: ctrl setting value + * @name: ctrl setting name, e.g. uart2, spi0 - unique per mpp_mode + * @subname: (optional) additional ctrl setting name, e.g. rts, cts + * @variant: (optional) variant identifier mask + * @flags: (private) flags to store gpi/gpo/gpio capabilities + * + * A ctrl_setting describes a specific internal mux function that a mpp pin + * can be switched to. The value (val) will be written in the corresponding + * register for common mpp pin configuration registers on MVEBU. SoC specific + * mpp_get/_set function may use val to distinguish between different settings. + * + * The name will be used to switch to this setting in DT description, e.g. + * marvell,function = "uart2". subname is only for debugging purposes. + * + * If name is one of "gpi", "gpo", "gpio" gpio capabilities are + * parsed during initialization and stored in flags. + * + * The variant can be used to combine different revisions of one SoC to a + * common pinctrl driver. It is matched (AND) with variant of soc_info to + * determine if a setting is available on the current SoC revision. + */ +struct mvebu_mpp_ctrl_setting { + u8 val; + const char *name; + const char *subname; + u8 variant; + u8 flags; +#define MVEBU_SETTING_GPO (1 << 0) +#define MVEBU_SETTING_GPI (1 << 1) +}; + +/** + * struct mvebu_mpp_mode - link ctrl and settings + * @pid: first pin id handled by this mode + * @settings: list of settings available for this mode + * + * A mode connects all available settings with the corresponding mpp_ctrl + * given by pid. + */ +struct mvebu_mpp_mode { + u8 pid; + struct mvebu_mpp_ctrl_setting *settings; +}; + +/** + * struct mvebu_pinctrl_soc_info - SoC specific info passed to pinctrl-mvebu + * @variant: variant mask of soc_info + * @controls: list of available mvebu_mpp_ctrls + * @ncontrols: number of available mvebu_mpp_ctrls + * @modes: list of available mvebu_mpp_modes + * @nmodes: number of available mvebu_mpp_modes + * @gpioranges: list of pinctrl_gpio_ranges + * @ngpioranges: number of available pinctrl_gpio_ranges + * + * This struct describes all pinctrl related information for a specific SoC. + * If variant is unequal 0 it will be matched (AND) with variant of each + * setting and allows to distinguish between different revisions of one SoC. + */ +struct mvebu_pinctrl_soc_info { + u8 variant; + struct mvebu_mpp_ctrl *controls; + int ncontrols; + struct mvebu_mpp_mode *modes; + int nmodes; + struct pinctrl_gpio_range *gpioranges; + int ngpioranges; +}; + +#define MPP_REG_CTRL(_idl, _idh) \ + { \ + .name = NULL, \ + .pid = _idl, \ + .npins = _idh - _idl + 1, \ + .pins = (unsigned[_idh - _idl + 1]) { }, \ + .mpp_get = NULL, \ + .mpp_set = NULL, \ + .mpp_gpio_req = NULL, \ + .mpp_gpio_dir = NULL, \ + } + +#define MPP_FUNC_CTRL(_idl, _idh, _name, _func) \ + { \ + .name = _name, \ + .pid = _idl, \ + .npins = _idh - _idl + 1, \ + .pins = (unsigned[_idh - _idl + 1]) { }, \ + .mpp_get = _func ## _get, \ + .mpp_set = _func ## _set, \ + .mpp_gpio_req = NULL, \ + .mpp_gpio_dir = NULL, \ + } + +#define MPP_FUNC_GPIO_CTRL(_idl, _idh, _name, _func) \ + { \ + .name = _name, \ + .pid = _idl, \ + .npins = _idh - _idl + 1, \ + .pins = (unsigned[_idh - _idl + 1]) { }, \ + .mpp_get = _func ## _get, \ + .mpp_set = _func ## _set, \ + .mpp_gpio_req = _func ## _gpio_req, \ + .mpp_gpio_dir = _func ## _gpio_dir, \ + } + +#define _MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \ + { \ + .val = _val, \ + .name = _name, \ + .subname = _subname, \ + .variant = _mask, \ + .flags = 0, \ + } + +#if defined(CONFIG_DEBUG_FS) +#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \ + _MPP_VAR_FUNCTION(_val, _name, _subname, _mask) +#else +#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \ + _MPP_VAR_FUNCTION(_val, _name, NULL, _mask) +#endif + +#define MPP_FUNCTION(_val, _name, _subname) \ + MPP_VAR_FUNCTION(_val, _name, _subname, (u8)-1) + +#define MPP_MODE(_id, ...) \ + { \ + .pid = _id, \ + .settings = (struct mvebu_mpp_ctrl_setting[]){ \ + __VA_ARGS__, { } }, \ + } + +#define MPP_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins) \ + { \ + .name = "mvebu-gpio", \ + .id = _id, \ + .pin_base = _pinbase, \ + .base = _gpiobase, \ + .npins = _npins, \ + } + +int mvebu_pinctrl_probe(struct platform_device *pdev); +int mvebu_pinctrl_remove(struct platform_device *pdev); + +#endif -- cgit v0.10.2 From c9f95cedfea088ec9bbcef3b8064d5275297b159 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 13 Sep 2012 17:41:44 +0200 Subject: pinctrl: mvebu: dove pinctrl driver This patch adds a SoC specific pinctrl driver for Marvell Dove SoCs plus DT binding documentation. This driver will use the mvebu pinctrl driver core. Signed-off-by: Sebastian Hesselbarth Acked-by: Linus Walleij Acked-by: Thomas Petazzoni Tested-by: Thomas Petazzoni Reviewed-by: Stephen Warren Signed-off-by: Jason Cooper diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt new file mode 100644 index 0000000..a648aaa --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt @@ -0,0 +1,72 @@ +* Marvell Dove SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,dove-pinctrl" +- clocks: (optional) phandle of pdma clock + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +name pins functions +================================================================================ +mpp0 0 gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm) +mpp1 1 gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm) +mpp2 2 gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt), + uart1(rts) +mpp3 3 gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act), + uart1(cts), lcd-spi(cs1) +mpp4 4 gpio, pmu, uart3(rts), sdio1(cd), spi1(miso) +mpp5 5 gpio, pmu, uart3(cts), sdio1(wp), spi1(cs) +mpp6 6 gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi) +mpp7 7 gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck) +mpp8 8 gpio, pmu, watchdog(rstout) +mpp9 9 gpio, pmu, pex1(clkreq) +mpp10 10 gpio, pmu, ssp(sclk) +mpp11 11 gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl), + sdio1(ledctrl), pex0(clkreq) +mpp12 12 gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), sata(act) +mpp13 13 gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp), + ssp(extclk) +mpp14 14 gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd) +mpp15 15 gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm) +mpp16 16 gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1) +mpp17 17 gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda), + ac97-1(sysclko) +mpp18 18 gpio, uart3(txd), sdio0(buspwr), ac97(sdi3), lcd0(pwm) +mpp19 19 gpio, uart3(rxd), sdio0(ledctrl), twsi(sck) +mpp20 20 gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso), + ac97(sysclko) +mpp21 21 gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0), + uart1(cts), ssp(sfrm) +mpp22 22 gpio, sdio0(buspwr), sdio1(buspwr), spi1(mosi), + lcd-spi(mosi), uart1(cts), ssp(txd) +mpp23 23 gpio, sdio0(ledctrl), sdio1(ledctrl), spi1(sck), + lcd-spi(sck), ssp(sclk) +mpp_camera 24-39 gpio, camera +mpp_sdio0 40-45 gpio, sdio0 +mpp_sdio1 46-51 gpio, sdio1 +mpp_audio1 52-57 gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp, + ssp/twsi +mpp_spi0 58-61 gpio, spi0 +mpp_uart1 62-63 gpio, uart1 +mpp_nand 64-71 gpo, nand +audio0 - i2s, ac97 +twsi - none, opt1, opt2, opt3 + +Notes: +* group "mpp_audio1" allows the following functions and gpio pins: + - gpio : gpio on pins 52-57 + - i2s1/spdifo : audio1 i2s on pins 52-55 and spdifo on 57, no gpios + - i2s1 : audio1 i2s on pins 52-55, gpio on pins 56,57 + - spdifo : spdifo on pin 57, gpio on pins 52-55 + - twsi : twsi on pins 56,57, gpio on pins 52-55 + - ssp/spdifo : ssp on pins 52-55, spdifo on pin 57, no gpios + - ssp : ssp on pins 52-55, gpio on pins 56,57 + - ssp/twsi : ssp on pins 52-55, twsi on pins 56,57, no gpios +* group "audio0" internally muxes i2s0 or ac97 controller to the dedicated + audio0 pins. +* group "twsi" internally muxes twsi controller to the dedicated or option pins. diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 20bfdc3..f15eba4 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -151,6 +151,10 @@ config PINCTRL_MVEBU select PINMUX select PINCONF +config PINCTRL_DOVE + bool + select PINCTRL_MVEBU + source "drivers/pinctrl/spear/Kconfig" endmenu diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 007ed32..d1327df 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -30,5 +30,6 @@ obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o obj-$(CONFIG_PINCTRL_MVEBU) += pinctrl-mvebu.o +obj-$(CONFIG_PINCTRL_DOVE) += pinctrl-dove.o obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/pinctrl/pinctrl-dove.c b/drivers/pinctrl/pinctrl-dove.c new file mode 100644 index 0000000..ffe74b2 --- /dev/null +++ b/drivers/pinctrl/pinctrl-dove.c @@ -0,0 +1,620 @@ +/* + * Marvell Dove pinctrl driver based on mvebu pinctrl core + * + * Author: Sebastian Hesselbarth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pinctrl-mvebu.h" + +#define DOVE_SB_REGS_VIRT_BASE 0xfde00000 +#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200) +#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10) +#define DOVE_AU0_AC97_SEL BIT(16) +#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C) +#define DOVE_TWSI_ENABLE_OPTION1 BIT(7) +#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030) +#define DOVE_TWSI_ENABLE_OPTION2 BIT(20) +#define DOVE_TWSI_ENABLE_OPTION3 BIT(21) +#define DOVE_TWSI_OPTION3_GPIO BIT(22) +#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034) +#define DOVE_SSP_ON_AU1 BIT(0) +#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c) +#define DOVE_AU1_SPDIFO_GPIO_EN BIT(1) +#define DOVE_NAND_GPIO_EN BIT(0) +#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400) +#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40) +#define DOVE_SPI_GPIO_SEL BIT(5) +#define DOVE_UART1_GPIO_SEL BIT(4) +#define DOVE_AU1_GPIO_SEL BIT(3) +#define DOVE_CAM_GPIO_SEL BIT(2) +#define DOVE_SD1_GPIO_SEL BIT(1) +#define DOVE_SD0_GPIO_SEL BIT(0) + +#define MPPS_PER_REG 8 +#define MPP_BITS 4 +#define MPP_MASK 0xf + +#define CONFIG_PMU BIT(4) + +static int dove_pmu_mpp_ctrl_get(struct mvebu_mpp_ctrl *ctrl, + unsigned long *config) +{ + unsigned off = (ctrl->pid / MPPS_PER_REG) * MPP_BITS; + unsigned shift = (ctrl->pid % MPPS_PER_REG) * MPP_BITS; + unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL); + unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off); + + if (pmu & (1 << ctrl->pid)) + *config = CONFIG_PMU; + else + *config = (mpp >> shift) & MPP_MASK; + return 0; +} + +static int dove_pmu_mpp_ctrl_set(struct mvebu_mpp_ctrl *ctrl, + unsigned long config) +{ + unsigned off = (ctrl->pid / MPPS_PER_REG) * MPP_BITS; + unsigned shift = (ctrl->pid % MPPS_PER_REG) * MPP_BITS; + unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL); + unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off); + + if (config == CONFIG_PMU) + writel(pmu | (1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL); + else { + writel(pmu & ~(1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL); + mpp &= ~(MPP_MASK << shift); + mpp |= config << shift; + writel(mpp, DOVE_MPP_VIRT_BASE + off); + } + return 0; +} + +static int dove_mpp4_ctrl_get(struct mvebu_mpp_ctrl *ctrl, + unsigned long *config) +{ + unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); + unsigned long mask; + + switch (ctrl->pid) { + case 24: /* mpp_camera */ + mask = DOVE_CAM_GPIO_SEL; + break; + case 40: /* mpp_sdio0 */ + mask = DOVE_SD0_GPIO_SEL; + break; + case 46: /* mpp_sdio1 */ + mask = DOVE_SD1_GPIO_SEL; + break; + case 58: /* mpp_spi0 */ + mask = DOVE_SPI_GPIO_SEL; + break; + case 62: /* mpp_uart1 */ + mask = DOVE_UART1_GPIO_SEL; + break; + default: + return -EINVAL; + } + + *config = ((mpp4 & mask) != 0); + + return 0; +} + +static int dove_mpp4_ctrl_set(struct mvebu_mpp_ctrl *ctrl, + unsigned long config) +{ + unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); + unsigned long mask; + + switch (ctrl->pid) { + case 24: /* mpp_camera */ + mask = DOVE_CAM_GPIO_SEL; + break; + case 40: /* mpp_sdio0 */ + mask = DOVE_SD0_GPIO_SEL; + break; + case 46: /* mpp_sdio1 */ + mask = DOVE_SD1_GPIO_SEL; + break; + case 58: /* mpp_spi0 */ + mask = DOVE_SPI_GPIO_SEL; + break; + case 62: /* mpp_uart1 */ + mask = DOVE_UART1_GPIO_SEL; + break; + default: + return -EINVAL; + } + + mpp4 &= ~mask; + if (config) + mpp4 |= mask; + + writel(mpp4, DOVE_MPP_CTRL4_VIRT_BASE); + + return 0; +} + +static int dove_nand_ctrl_get(struct mvebu_mpp_ctrl *ctrl, + unsigned long *config) +{ + unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE); + + *config = ((gmpp & DOVE_NAND_GPIO_EN) != 0); + + return 0; +} + +static int dove_nand_ctrl_set(struct mvebu_mpp_ctrl *ctrl, + unsigned long config) +{ + unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE); + + gmpp &= ~DOVE_NAND_GPIO_EN; + if (config) + gmpp |= DOVE_NAND_GPIO_EN; + + writel(gmpp, DOVE_MPP_GENERAL_VIRT_BASE); + + return 0; +} + +static int dove_audio0_ctrl_get(struct mvebu_mpp_ctrl *ctrl, + unsigned long *config) +{ + unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL); + + *config = ((pmu & DOVE_AU0_AC97_SEL) != 0); + + return 0; +} + +static int dove_audio0_ctrl_set(struct mvebu_mpp_ctrl *ctrl, + unsigned long config) +{ + unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL); + + pmu &= ~DOVE_AU0_AC97_SEL; + if (config) + pmu |= DOVE_AU0_AC97_SEL; + writel(pmu, DOVE_PMU_MPP_GENERAL_CTRL); + + return 0; +} + +static int dove_audio1_ctrl_get(struct mvebu_mpp_ctrl *ctrl, + unsigned long *config) +{ + unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); + unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1); + unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE); + unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2); + + *config = 0; + if (mpp4 & DOVE_AU1_GPIO_SEL) + *config |= BIT(3); + if (sspc1 & DOVE_SSP_ON_AU1) + *config |= BIT(2); + if (gmpp & DOVE_AU1_SPDIFO_GPIO_EN) + *config |= BIT(1); + if (gcfg2 & DOVE_TWSI_OPTION3_GPIO) + *config |= BIT(0); + + /* SSP/TWSI only if I2S1 not set*/ + if ((*config & BIT(3)) == 0) + *config &= ~(BIT(2) | BIT(0)); + /* TWSI only if SPDIFO not set*/ + if ((*config & BIT(1)) == 0) + *config &= ~BIT(0); + return 0; +} + +static int dove_audio1_ctrl_set(struct mvebu_mpp_ctrl *ctrl, + unsigned long config) +{ + unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); + unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1); + unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE); + unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2); + + if (config & BIT(0)) + gcfg2 |= DOVE_TWSI_OPTION3_GPIO; + if (config & BIT(1)) + gmpp |= DOVE_AU1_SPDIFO_GPIO_EN; + if (config & BIT(2)) + sspc1 |= DOVE_SSP_ON_AU1; + if (config & BIT(3)) + mpp4 |= DOVE_AU1_GPIO_SEL; + + writel(mpp4, DOVE_MPP_CTRL4_VIRT_BASE); + writel(sspc1, DOVE_SSP_CTRL_STATUS_1); + writel(gmpp, DOVE_MPP_GENERAL_VIRT_BASE); + writel(gcfg2, DOVE_GLOBAL_CONFIG_2); + + return 0; +} + +/* mpp[52:57] gpio pins depend heavily on current config; + * gpio_req does not try to mux in gpio capabilities to not + * break other functions. If you require all mpps as gpio + * enforce gpio setting by pinctrl mapping. + */ +static int dove_audio1_ctrl_gpio_req(struct mvebu_mpp_ctrl *ctrl, u8 pid) +{ + unsigned long config; + + dove_audio1_ctrl_get(ctrl, &config); + + switch (config) { + case 0x02: /* i2s1 : gpio[56:57] */ + case 0x0e: /* ssp : gpio[56:57] */ + if (pid >= 56) + return 0; + return -ENOTSUPP; + case 0x08: /* spdifo : gpio[52:55] */ + case 0x0b: /* twsi : gpio[52:55] */ + if (pid <= 55) + return 0; + return -ENOTSUPP; + case 0x0a: /* all gpio */ + return 0; + /* 0x00 : i2s1/spdifo : no gpio */ + /* 0x0c : ssp/spdifo : no gpio */ + /* 0x0f : ssp/twsi : no gpio */ + } + return -ENOTSUPP; +} + +/* mpp[52:57] has gpio pins capable of in and out */ +static int dove_audio1_ctrl_gpio_dir(struct mvebu_mpp_ctrl *ctrl, u8 pid, + bool input) +{ + if (pid < 52 || pid > 57) + return -ENOTSUPP; + return 0; +} + +static int dove_twsi_ctrl_get(struct mvebu_mpp_ctrl *ctrl, + unsigned long *config) +{ + unsigned long gcfg1 = readl(DOVE_GLOBAL_CONFIG_1); + unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2); + + *config = 0; + if (gcfg1 & DOVE_TWSI_ENABLE_OPTION1) + *config = 1; + else if (gcfg2 & DOVE_TWSI_ENABLE_OPTION2) + *config = 2; + else if (gcfg2 & DOVE_TWSI_ENABLE_OPTION3) + *config = 3; + + return 0; +} + +static int dove_twsi_ctrl_set(struct mvebu_mpp_ctrl *ctrl, + unsigned long config) +{ + unsigned long gcfg1 = readl(DOVE_GLOBAL_CONFIG_1); + unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2); + + gcfg1 &= ~DOVE_TWSI_ENABLE_OPTION1; + gcfg2 &= ~(DOVE_TWSI_ENABLE_OPTION2 | DOVE_TWSI_ENABLE_OPTION2); + + switch (config) { + case 1: + gcfg1 |= DOVE_TWSI_ENABLE_OPTION1; + break; + case 2: + gcfg2 |= DOVE_TWSI_ENABLE_OPTION2; + break; + case 3: + gcfg2 |= DOVE_TWSI_ENABLE_OPTION3; + break; + } + + writel(gcfg1, DOVE_GLOBAL_CONFIG_1); + writel(gcfg2, DOVE_GLOBAL_CONFIG_2); + + return 0; +} + +static struct mvebu_mpp_ctrl dove_mpp_controls[] = { + MPP_FUNC_CTRL(0, 0, "mpp0", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(1, 1, "mpp1", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(2, 2, "mpp2", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(3, 3, "mpp3", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(4, 4, "mpp4", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(5, 5, "mpp5", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(6, 6, "mpp6", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(7, 7, "mpp7", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(8, 8, "mpp8", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(9, 9, "mpp9", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(10, 10, "mpp10", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(11, 11, "mpp11", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(12, 12, "mpp12", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(13, 13, "mpp13", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(14, 14, "mpp14", dove_pmu_mpp_ctrl), + MPP_FUNC_CTRL(15, 15, "mpp15", dove_pmu_mpp_ctrl), + MPP_REG_CTRL(16, 23), + MPP_FUNC_CTRL(24, 39, "mpp_camera", dove_mpp4_ctrl), + MPP_FUNC_CTRL(40, 45, "mpp_sdio0", dove_mpp4_ctrl), + MPP_FUNC_CTRL(46, 51, "mpp_sdio1", dove_mpp4_ctrl), + MPP_FUNC_GPIO_CTRL(52, 57, "mpp_audio1", dove_audio1_ctrl), + MPP_FUNC_CTRL(58, 61, "mpp_spi0", dove_mpp4_ctrl), + MPP_FUNC_CTRL(62, 63, "mpp_uart1", dove_mpp4_ctrl), + MPP_FUNC_CTRL(64, 71, "mpp_nand", dove_nand_ctrl), + MPP_FUNC_CTRL(72, 72, "audio0", dove_audio0_ctrl), + MPP_FUNC_CTRL(73, 73, "twsi", dove_twsi_ctrl), +}; + +static struct mvebu_mpp_mode dove_mpp_modes[] = { + MPP_MODE(0, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x02, "uart2", "rts"), + MPP_FUNCTION(0x03, "sdio0", "cd"), + MPP_FUNCTION(0x0f, "lcd0", "pwm"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(1, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x02, "uart2", "cts"), + MPP_FUNCTION(0x03, "sdio0", "wp"), + MPP_FUNCTION(0x0f, "lcd1", "pwm"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(2, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x01, "sata", "prsnt"), + MPP_FUNCTION(0x02, "uart2", "txd"), + MPP_FUNCTION(0x03, "sdio0", "buspwr"), + MPP_FUNCTION(0x04, "uart1", "rts"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(3, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x01, "sata", "act"), + MPP_FUNCTION(0x02, "uart2", "rxd"), + MPP_FUNCTION(0x03, "sdio0", "ledctrl"), + MPP_FUNCTION(0x04, "uart1", "cts"), + MPP_FUNCTION(0x0f, "lcd-spi", "cs1"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(4, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x02, "uart3", "rts"), + MPP_FUNCTION(0x03, "sdio1", "cd"), + MPP_FUNCTION(0x04, "spi1", "miso"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(5, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x02, "uart3", "cts"), + MPP_FUNCTION(0x03, "sdio1", "wp"), + MPP_FUNCTION(0x04, "spi1", "cs"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(6, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x02, "uart3", "txd"), + MPP_FUNCTION(0x03, "sdio1", "buspwr"), + MPP_FUNCTION(0x04, "spi1", "mosi"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(7, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x02, "uart3", "rxd"), + MPP_FUNCTION(0x03, "sdio1", "ledctrl"), + MPP_FUNCTION(0x04, "spi1", "sck"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(8, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x01, "watchdog", "rstout"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(9, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x05, "pex1", "clkreq"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(10, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x05, "ssp", "sclk"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(11, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x01, "sata", "prsnt"), + MPP_FUNCTION(0x02, "sata-1", "act"), + MPP_FUNCTION(0x03, "sdio0", "ledctrl"), + MPP_FUNCTION(0x04, "sdio1", "ledctrl"), + MPP_FUNCTION(0x05, "pex0", "clkreq"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(12, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x01, "sata", "act"), + MPP_FUNCTION(0x02, "uart2", "rts"), + MPP_FUNCTION(0x03, "audio0", "extclk"), + MPP_FUNCTION(0x04, "sdio1", "cd"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(13, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x02, "uart2", "cts"), + MPP_FUNCTION(0x03, "audio1", "extclk"), + MPP_FUNCTION(0x04, "sdio1", "wp"), + MPP_FUNCTION(0x05, "ssp", "extclk"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(14, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x02, "uart2", "txd"), + MPP_FUNCTION(0x04, "sdio1", "buspwr"), + MPP_FUNCTION(0x05, "ssp", "rxd"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(15, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x02, "uart2", "rxd"), + MPP_FUNCTION(0x04, "sdio1", "ledctrl"), + MPP_FUNCTION(0x05, "ssp", "sfrm"), + MPP_FUNCTION(0x10, "pmu", NULL)), + MPP_MODE(16, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x02, "uart3", "rts"), + MPP_FUNCTION(0x03, "sdio0", "cd"), + MPP_FUNCTION(0x04, "lcd-spi", "cs1"), + MPP_FUNCTION(0x05, "ac97", "sdi1")), + MPP_MODE(17, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x01, "ac97-1", "sysclko"), + MPP_FUNCTION(0x02, "uart3", "cts"), + MPP_FUNCTION(0x03, "sdio0", "wp"), + MPP_FUNCTION(0x04, "twsi", "sda"), + MPP_FUNCTION(0x05, "ac97", "sdi2")), + MPP_MODE(18, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x02, "uart3", "txd"), + MPP_FUNCTION(0x03, "sdio0", "buspwr"), + MPP_FUNCTION(0x04, "lcd0", "pwm"), + MPP_FUNCTION(0x05, "ac97", "sdi3")), + MPP_MODE(19, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x02, "uart3", "rxd"), + MPP_FUNCTION(0x03, "sdio0", "ledctrl"), + MPP_FUNCTION(0x04, "twsi", "sck")), + MPP_MODE(20, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x01, "ac97", "sysclko"), + MPP_FUNCTION(0x02, "lcd-spi", "miso"), + MPP_FUNCTION(0x03, "sdio1", "cd"), + MPP_FUNCTION(0x05, "sdio0", "cd"), + MPP_FUNCTION(0x06, "spi1", "miso")), + MPP_MODE(21, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x01, "uart1", "rts"), + MPP_FUNCTION(0x02, "lcd-spi", "cs0"), + MPP_FUNCTION(0x03, "sdio1", "wp"), + MPP_FUNCTION(0x04, "ssp", "sfrm"), + MPP_FUNCTION(0x05, "sdio0", "wp"), + MPP_FUNCTION(0x06, "spi1", "cs")), + MPP_MODE(22, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x01, "uart1", "cts"), + MPP_FUNCTION(0x02, "lcd-spi", "mosi"), + MPP_FUNCTION(0x03, "sdio1", "buspwr"), + MPP_FUNCTION(0x04, "ssp", "txd"), + MPP_FUNCTION(0x05, "sdio0", "buspwr"), + MPP_FUNCTION(0x06, "spi1", "mosi")), + MPP_MODE(23, + MPP_FUNCTION(0x00, "gpio", NULL), + MPP_FUNCTION(0x02, "lcd-spi", "sck"), + MPP_FUNCTION(0x03, "sdio1", "ledctrl"), + MPP_FUNCTION(0x04, "ssp", "sclk"), + MPP_FUNCTION(0x05, "sdio0", "ledctrl"), + MPP_FUNCTION(0x06, "spi1", "sck")), + MPP_MODE(24, + MPP_FUNCTION(0x00, "camera", NULL), + MPP_FUNCTION(0x01, "gpio", NULL)), + MPP_MODE(40, + MPP_FUNCTION(0x00, "sdio0", NULL), + MPP_FUNCTION(0x01, "gpio", NULL)), + MPP_MODE(46, + MPP_FUNCTION(0x00, "sdio1", NULL), + MPP_FUNCTION(0x01, "gpio", NULL)), + MPP_MODE(52, + MPP_FUNCTION(0x00, "i2s1/spdifo", NULL), + MPP_FUNCTION(0x02, "i2s1", NULL), + MPP_FUNCTION(0x08, "spdifo", NULL), + MPP_FUNCTION(0x0a, "gpio", NULL), + MPP_FUNCTION(0x0b, "twsi", NULL), + MPP_FUNCTION(0x0c, "ssp/spdifo", NULL), + MPP_FUNCTION(0x0e, "ssp", NULL), + MPP_FUNCTION(0x0f, "ssp/twsi", NULL)), + MPP_MODE(58, + MPP_FUNCTION(0x00, "spi0", NULL), + MPP_FUNCTION(0x01, "gpio", NULL)), + MPP_MODE(62, + MPP_FUNCTION(0x00, "uart1", NULL), + MPP_FUNCTION(0x01, "gpio", NULL)), + MPP_MODE(64, + MPP_FUNCTION(0x00, "nand", NULL), + MPP_FUNCTION(0x01, "gpo", NULL)), + MPP_MODE(72, + MPP_FUNCTION(0x00, "i2s", NULL), + MPP_FUNCTION(0x01, "ac97", NULL)), + MPP_MODE(73, + MPP_FUNCTION(0x00, "twsi-none", NULL), + MPP_FUNCTION(0x01, "twsi-opt1", NULL), + MPP_FUNCTION(0x02, "twsi-opt2", NULL), + MPP_FUNCTION(0x03, "twsi-opt3", NULL)), +}; + +static struct pinctrl_gpio_range dove_mpp_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 32), + MPP_GPIO_RANGE(1, 32, 32, 32), + MPP_GPIO_RANGE(2, 64, 64, 8), +}; + +static struct mvebu_pinctrl_soc_info dove_pinctrl_info = { + .controls = dove_mpp_controls, + .ncontrols = ARRAY_SIZE(dove_mpp_controls), + .modes = dove_mpp_modes, + .nmodes = ARRAY_SIZE(dove_mpp_modes), + .gpioranges = dove_mpp_gpio_ranges, + .ngpioranges = ARRAY_SIZE(dove_mpp_gpio_ranges), + .variant = 0, +}; + +static struct clk *clk; + +static struct of_device_id dove_pinctrl_of_match[] __devinitdata = { + { .compatible = "marvell,dove-pinctrl", .data = &dove_pinctrl_info }, + { } +}; + +static int __devinit dove_pinctrl_probe(struct platform_device *pdev) +{ + const struct of_device_id *match = + of_match_device(dove_pinctrl_of_match, &pdev->dev); + pdev->dev.platform_data = match->data; + + /* + * General MPP Configuration Register is part of pdma registers. + * grab clk to make sure it is ticking. + */ + clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(clk)) + clk_prepare_enable(clk); + + return mvebu_pinctrl_probe(pdev); +} + +static int __devexit dove_pinctrl_remove(struct platform_device *pdev) +{ + int ret; + + ret = mvebu_pinctrl_remove(pdev); + if (!IS_ERR(clk)) + clk_disable_unprepare(clk); + return ret; +} + +static struct platform_driver dove_pinctrl_driver = { + .driver = { + .name = "dove-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(dove_pinctrl_of_match), + }, + .probe = dove_pinctrl_probe, + .remove = __devexit_p(dove_pinctrl_remove), +}; + +module_platform_driver(dove_pinctrl_driver); + +MODULE_AUTHOR("Sebastian Hesselbarth "); +MODULE_DESCRIPTION("Marvell Dove pinctrl driver"); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 9d4b1632bcd77f7fb98c4c5c1f4f2fc70fa1aa23 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 13 Sep 2012 17:41:45 +0200 Subject: pinctrl: mvebu: kirkwood pinctrl driver This patch adds a SoC specific pinctrl driver for Marvell Kirkwood SoCs plus DT binding documentation. This driver will use the mvebu pinctrl driver core. Signed-off-by: Sebastian Hesselbarth Acked-by: Thomas Petazzoni Tested-by: Thomas Petazzoni Reviewed-by: Stephen Warren Tested-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt new file mode 100644 index 0000000..361bccb --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt @@ -0,0 +1,279 @@ +* Marvell Kirkwood SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,88f6180-pinctrl", + "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl", + "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl" + +This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x. + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +* Marvell Kirkwood 88f6180 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig) +mpp12 12 gpo, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs) +mpp17 17 gpio, sdio(d3) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, mii(rxerr) +mpp21 21 gpio, audio(spdifi) +mpp22 22 gpio, audio(spdifo) +mpp23 23 gpio, audio(rmclk) +mpp24 24 gpio, audio(bclk) +mpp25 25 gpio, audio(sdo) +mpp26 26 gpio, audio(lrclk) +mpp27 27 gpio, audio(mclk) +mpp28 28 gpio, audio(sdi) +mpp29 29 gpio, audio(extclk) + +* Marvell Kirkwood 88f6190 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col), mii-1(rxerr) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs), sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig), sata0(act) +mpp12 12 gpo, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs) +mpp17 17 gpio, sdio(d3), sata0(prsnt) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0) +mpp21 21 gpio, ge1(txd1), sata0(act) +mpp22 22 gpio, ge1(txd2) +mpp23 23 gpio, ge1(txd3), sata0(prsnt) +mpp24 24 gpio, ge1(rxd0) +mpp25 25 gpio, ge1(rxd1) +mpp26 26 gpio, ge1(rxd2) +mpp27 27 gpio, ge1(rxd3) +mpp28 28 gpio, ge1(col) +mpp29 29 gpio, ge1(txclk) +mpp30 30 gpio, ge1(rxclk) +mpp31 31 gpio, ge1(rxclk) +mpp32 32 gpio, ge1(txclko) +mpp33 33 gpo, ge1(txclk) +mpp34 34 gpio, ge1(txen) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr) + +* Marvell Kirkwood 88f6192 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col), mii-1(rxerr), sata1(prsnt) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs), sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig), sata1(act) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig), sata0(act) +mpp12 12 gpo, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs), + sata1(act) +mpp17 17 gpio, sdio(d3), sata0(prsnt) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi), + sata1(act) +mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql), + audio(spdifo) +mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk), + sata1(prsnt) +mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql), + audio(bclk) +mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo) +mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk) +mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk) +mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi) +mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk) +mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst) +mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk) +mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs) +mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx) +mpp33 33 gpo, ge1(txclk), tdm(drx) +mpp34 34 gpio, ge1(txen), tdm(spi-cs1) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql) + +* Marvell Kirkwood 88f6281 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col), mii-1(rxerr), sata1(prsnt) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs), sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig), sata1(act) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig), sata0(act) +mpp12 12 gpio, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs), + sata1(act) +mpp17 17 gpio, sdio(d3), sata0(prsnt) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi), + sata1(act) +mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql), + audio(spdifo) +mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk), + sata1(prsnt) +mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql), + audio(bclk) +mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo) +mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk) +mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk) +mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi) +mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk) +mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst) +mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk) +mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs) +mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx) +mpp33 33 gpo, ge1(txclk), tdm(drx) +mpp34 34 gpio, ge1(txen), tdm(spi-cs1), sata1(act) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql) +mpp36 36 gpio, ts(mp0), tdm(spi-cs1), audio(spdifi) +mpp37 37 gpio, ts(mp1), tdm(tx2ql), audio(spdifo) +mpp38 38 gpio, ts(mp2), tdm(rx2ql), audio(rmclk) +mpp39 39 gpio, ts(mp3), tdm(spi-cs0), audio(bclk) +mpp40 40 gpio, ts(mp4), tdm(spi-sck), audio(sdo) +mpp41 41 gpio, ts(mp5), tdm(spi-miso), audio(lrclk) +mpp42 42 gpio, ts(mp6), tdm(spi-mosi), audio(mclk) +mpp43 43 gpio, ts(mp7), tdm(int), audio(sdi) +mpp44 44 gpio, ts(mp8), tdm(rst), audio(extclk) +mpp45 45 gpio, ts(mp9), tdm(pclk) +mpp46 46 gpio, ts(mp10), tdm(fs) +mpp47 47 gpio, ts(mp11), tdm(drx) +mpp48 48 gpio, ts(mp12), tdm(dtx) +mpp49 49 gpio, ts(mp9), tdm(rx0ql), ptp(clk) + +* Marvell Kirkwood 88f6282 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), sata1(act), lcd(hsync) +mpp5 5 gpo, nand(io7), uart0(txd), sata0(act), lcd(vsync) +mpp6 6 sysrst(out), spi(mosi) +mpp7 7 gpo, spi(cs), lcd(pwm) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), mii(col), + mii-1(rxerr), sata1(prsnt) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), mii(crs), + sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), sata1(act) +mpp11 11 gpio, spi(miso), uart0(rxd), sata0(act) +mpp12 12 gpo, sdio(clk), audio(spdifo), spi(mosi), twsi(sda) +mpp13 13 gpio, sdio(cmd), uart1(txd), audio(rmclk), lcd(pwm) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt), + audio(spdifi), audio-1(sdi) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act), + spi(cs) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs), + sata1(act), lcd(extclk) +mpp17 17 gpio, sdio(d3), sata0(prsnt), sata1(act), twsi1(sck) +mpp18 18 gpo, nand(io0), pex(clkreq) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi), + sata1(act), lcd(d0) +mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql), + audio(spdifo), lcd(d1) +mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk), + sata1(prsnt), lcd(d2) +mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql), + audio(bclk), lcd(d3) +mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo), + lcd(d4) +mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk), + lcd(d5) +mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk), + lcd(d6) +mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi), + lcd(d7) +mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk), + lcd(d8) +mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst), lcd(d9) +mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk), lcd(d10) +mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs), lcd(d11) +mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx), lcd(d12) +mpp33 33 gpo, ge1(txclk), tdm(drx), lcd(d13) +mpp34 34 gpio, ge1(txen), tdm(spi-cs1), sata1(act), lcd(d14) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql), + lcd(d15) +mpp36 36 gpio, ts(mp0), tdm(spi-cs1), audio(spdifi), twsi1(sda) +mpp37 37 gpio, ts(mp1), tdm(tx2ql), audio(spdifo), twsi1(sck) +mpp38 38 gpio, ts(mp2), tdm(rx2ql), audio(rmclk), lcd(d18) +mpp39 39 gpio, ts(mp3), tdm(spi-cs0), audio(bclk), lcd(d19) +mpp40 40 gpio, ts(mp4), tdm(spi-sck), audio(sdo), lcd(d20) +mpp41 41 gpio, ts(mp5), tdm(spi-miso), audio(lrclk), lcd(d21) +mpp42 42 gpio, ts(mp6), tdm(spi-mosi), audio(mclk), lcd(d22) +mpp43 43 gpio, ts(mp7), tdm(int), audio(sdi), lcd(d23) +mpp44 44 gpio, ts(mp8), tdm(rst), audio(extclk), lcd(clk) +mpp45 45 gpio, ts(mp9), tdm(pclk), lcd(e) +mpp46 46 gpio, ts(mp10), tdm(fs), lcd(hsync) +mpp47 47 gpio, ts(mp11), tdm(drx), lcd(vsync) +mpp48 48 gpio, ts(mp12), tdm(dtx), lcd(d16) +mpp49 49 gpo, tdm(rx0ql), pex(clkreq), lcd(d17) diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index f15eba4..31c0bba 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -155,6 +155,10 @@ config PINCTRL_DOVE bool select PINCTRL_MVEBU +config PINCTRL_KIRKWOOD + bool + select PINCTRL_MVEBU + source "drivers/pinctrl/spear/Kconfig" endmenu diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index d1327df..3006294 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -31,5 +31,6 @@ obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o obj-$(CONFIG_PINCTRL_MVEBU) += pinctrl-mvebu.o obj-$(CONFIG_PINCTRL_DOVE) += pinctrl-dove.o +obj-$(CONFIG_PINCTRL_KIRKWOOD) += pinctrl-kirkwood.o obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/pinctrl/pinctrl-kirkwood.c b/drivers/pinctrl/pinctrl-kirkwood.c new file mode 100644 index 0000000..9a74ef6 --- /dev/null +++ b/drivers/pinctrl/pinctrl-kirkwood.c @@ -0,0 +1,472 @@ +/* + * Marvell Kirkwood pinctrl driver based on mvebu pinctrl core + * + * Author: Sebastian Hesselbarth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pinctrl-mvebu.h" + +#define V(f6180, f6190, f6192, f6281, f6282) \ + ((f6180 << 0) | (f6190 << 1) | (f6192 << 2) | \ + (f6281 << 3) | (f6282 << 4)) + +enum kirkwood_variant { + VARIANT_MV88F6180 = V(1, 0, 0, 0, 0), + VARIANT_MV88F6190 = V(0, 1, 0, 0, 0), + VARIANT_MV88F6192 = V(0, 0, 1, 0, 0), + VARIANT_MV88F6281 = V(0, 0, 0, 1, 0), + VARIANT_MV88F6282 = V(0, 0, 0, 0, 1), +}; + +static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = { + MPP_MODE(0, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io2", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1))), + MPP_MODE(1, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io3", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "mosi", V(1, 1, 1, 1, 1))), + MPP_MODE(2, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io4", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1))), + MPP_MODE(3, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io5", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1))), + MPP_MODE(4, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io6", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "rxd", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1)), + MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0))), + MPP_MODE(5, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io7", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "txd", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "ptp", "trig", V(1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1))), + MPP_MODE(6, + MPP_VAR_FUNCTION(0x0, "sysrst", "out", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "spi", "mosi", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "ptp", "trig", V(1, 1, 1, 1, 0))), + MPP_MODE(7, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "pex", "rsto", V(1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ptp", "trig", V(1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1))), + MPP_MODE(8, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "twsi0", "sda", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "rts", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "mii-1", "rxerr", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0xc, "ptp", "clk", V(1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1))), + MPP_MODE(9, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "twsi0", "sck", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "cts", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xc, "ptp", "evreq", V(1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1))), + MPP_MODE(10, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0X3, "uart0", "txd", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0xc, "ptp", "trig", V(1, 1, 1, 1, 0))), + MPP_MODE(11, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart0", "rxd", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "ptp-1", "evreq", V(1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xc, "ptp-2", "trig", V(1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1))), + MPP_MODE(12, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 0, 1)), + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0x1, "sdio", "clk", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xa, "audio", "spdifo", V(0, 0, 0, 0, 1)), + MPP_VAR_FUNCTION(0xb, "spi", "mosi", V(0, 0, 0, 0, 1)), + MPP_VAR_FUNCTION(0xd, "twsi1", "sda", V(0, 0, 0, 0, 1))), + MPP_MODE(13, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "sdio", "cmd", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xa, "audio", "rmclk", V(0, 0, 0, 0, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1))), + MPP_MODE(14, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "sdio", "d0", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "sata1", "prsnt", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0xa, "audio", "spdifi", V(0, 0, 0, 0, 1)), + MPP_VAR_FUNCTION(0xb, "audio-1", "sdi", V(0, 0, 0, 0, 1)), + MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1))), + MPP_MODE(15, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "sdio", "d1", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "sata0", "act", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "spi", "cs", V(0, 0, 0, 0, 1))), + MPP_MODE(16, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "sdio", "d2", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "sata1", "act", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "extclk", V(0, 0, 0, 0, 1)), + MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1))), + MPP_MODE(17, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "sdio", "d3", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "sata0", "prsnt", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xa, "sata1", "act", V(0, 0, 0, 0, 1)), + MPP_VAR_FUNCTION(0xd, "twsi1", "sck", V(0, 0, 0, 0, 1))), + MPP_MODE(18, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io0", V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "pex", "clkreq", V(0, 0, 0, 0, 1))), + MPP_MODE(19, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io1", V(1, 1, 1, 1, 1))), + MPP_MODE(20, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "txd0", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d0", V(0, 0, 0, 0, 1)), + MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(1, 0, 0, 0, 0))), + MPP_MODE(21, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "txd1", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(1, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d1", V(0, 0, 0, 0, 1))), + MPP_MODE(22, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "txd2", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(1, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d2", V(0, 0, 0, 0, 1))), + MPP_MODE(23, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "txd3", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(1, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d3", V(0, 0, 0, 0, 1))), + MPP_MODE(24, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxd0", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(1, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d4", V(0, 0, 0, 0, 1))), + MPP_MODE(25, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxd1", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(1, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d5", V(0, 0, 0, 0, 1))), + MPP_MODE(26, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxd2", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(1, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d6", V(0, 0, 0, 0, 1))), + MPP_MODE(27, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxd3", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(1, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d7", V(0, 0, 0, 0, 1))), + MPP_MODE(28, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "col", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(1, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d8", V(0, 0, 0, 0, 1))), + MPP_MODE(29, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "txclk", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(1, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d9", V(0, 0, 0, 0, 1))), + MPP_MODE(30, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxctl", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d10", V(0, 0, 0, 0, 1))), + MPP_MODE(31, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxclk", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d11", V(0, 0, 0, 0, 1))), + MPP_MODE(32, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "txclko", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d12", V(0, 0, 0, 0, 1))), + MPP_MODE(33, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "txctl", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d13", V(0, 0, 0, 0, 1))), + MPP_MODE(34, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "txen", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d14", V(0, 0, 0, 0, 1))), + MPP_MODE(35, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxerr", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d15", V(0, 0, 0, 0, 1)), + MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(0, 1, 1, 1, 1))), + MPP_MODE(36, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "twsi1", "sda", V(0, 0, 0, 0, 1))), + MPP_MODE(37, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "twsi1", "sck", V(0, 0, 0, 0, 1))), + MPP_MODE(38, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d18", V(0, 0, 0, 0, 1))), + MPP_MODE(39, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d19", V(0, 0, 0, 0, 1))), + MPP_MODE(40, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d20", V(0, 0, 0, 0, 1))), + MPP_MODE(41, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d21", V(0, 0, 0, 0, 1))), + MPP_MODE(42, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d22", V(0, 0, 0, 0, 1))), + MPP_MODE(43, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d23", V(0, 0, 0, 0, 1))), + MPP_MODE(44, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "clk", V(0, 0, 0, 0, 1))), + MPP_MODE(45, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "e", V(0, 0, 0, 0, 1))), + MPP_MODE(46, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1))), + MPP_MODE(47, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1))), + MPP_MODE(48, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d16", V(0, 0, 0, 0, 1))), + MPP_MODE(49, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 0, 0, 0, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 0, 1, 1)), + MPP_VAR_FUNCTION(0x5, "ptp", "clk", V(0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xa, "pex", "clkreq", V(0, 0, 0, 0, 1)), + MPP_VAR_FUNCTION(0xb, "lcd", "d17", V(0, 0, 0, 0, 1))), +}; + +static struct mvebu_mpp_ctrl mv88f6180_mpp_controls[] = { + MPP_REG_CTRL(0, 29), +}; + +static struct pinctrl_gpio_range mv88f6180_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 30), +}; + +static struct mvebu_mpp_ctrl mv88f619x_mpp_controls[] = { + MPP_REG_CTRL(0, 35), +}; + +static struct pinctrl_gpio_range mv88f619x_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 32), + MPP_GPIO_RANGE(1, 32, 32, 4), +}; + +static struct mvebu_mpp_ctrl mv88f628x_mpp_controls[] = { + MPP_REG_CTRL(0, 49), +}; + +static struct pinctrl_gpio_range mv88f628x_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 32), + MPP_GPIO_RANGE(1, 32, 32, 18), +}; + +static struct mvebu_pinctrl_soc_info mv88f6180_info = { + .variant = VARIANT_MV88F6180, + .controls = mv88f6180_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f6180_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f6180_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f6180_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv88f6190_info = { + .variant = VARIANT_MV88F6190, + .controls = mv88f619x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f619x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv88f6192_info = { + .variant = VARIANT_MV88F6192, + .controls = mv88f619x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f619x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv88f6281_info = { + .variant = VARIANT_MV88F6281, + .controls = mv88f628x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f628x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv88f6282_info = { + .variant = VARIANT_MV88F6282, + .controls = mv88f628x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f628x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges), +}; + +static struct of_device_id kirkwood_pinctrl_of_match[] __devinitdata = { + { .compatible = "marvell,88f6180-pinctrl", .data = &mv88f6180_info }, + { .compatible = "marvell,88f6190-pinctrl", .data = &mv88f6190_info }, + { .compatible = "marvell,88f6192-pinctrl", .data = &mv88f6192_info }, + { .compatible = "marvell,88f6281-pinctrl", .data = &mv88f6281_info }, + { .compatible = "marvell,88f6282-pinctrl", .data = &mv88f6282_info }, + { } +}; + +static int __devinit kirkwood_pinctrl_probe(struct platform_device *pdev) +{ + const struct of_device_id *match = + of_match_device(kirkwood_pinctrl_of_match, &pdev->dev); + pdev->dev.platform_data = match->data; + return mvebu_pinctrl_probe(pdev); +} + +static int __devexit kirkwood_pinctrl_remove(struct platform_device *pdev) +{ + return mvebu_pinctrl_remove(pdev); +} + +static struct platform_driver kirkwood_pinctrl_driver = { + .driver = { + .name = "kirkwood-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(kirkwood_pinctrl_of_match), + }, + .probe = kirkwood_pinctrl_probe, + .remove = __devexit_p(kirkwood_pinctrl_remove), +}; + +module_platform_driver(kirkwood_pinctrl_driver); + +MODULE_AUTHOR("Sebastian Hesselbarth "); +MODULE_DESCRIPTION("Marvell Kirkwood pinctrl driver"); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 5f597bb2be5723e1ea5d3337337f671ced4f37bf Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 13 Sep 2012 17:41:46 +0200 Subject: pinctrl: mvebu: add pinctrl driver for Armada 370 This pinctrl driver is not a full-blown pinctrl driver from scratch: it relies on the common pinctrl-mvebu driver, which is used for all Marvell EBU SoCs. Signed-off-by: Thomas Petazzoni Acked-by: Linus Walleij Acked-by: Thomas Petazzoni Tested-by: Thomas Petazzoni Reviewed-by: Stephen Warren Signed-off-by: Jason Cooper diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt new file mode 100644 index 0000000..01ef408 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt @@ -0,0 +1,95 @@ +* Marvell Armada 370 SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,88f6710-pinctrl" + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +name pins functions +================================================================================ +mpp0 0 gpio, uart0(rxd) +mpp1 1 gpo, uart0(txd) +mpp2 2 gpio, i2c0(sck), uart0(txd) +mpp3 3 gpio, i2c0(sda), uart0(rxd) +mpp4 4 gpio, cpu_pd(vdd) +mpp5 5 gpo, ge0(txclko), uart1(txd), spi1(clk), audio(mclk) +mpp6 6 gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo) +mpp7 7 gpo, ge0(txd1), tdm(tdx), audio(lrclk) +mpp8 8 gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk) +mpp9 9 gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo) +mpp10 10 gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi) +mpp11 11 gpio, ge0(rxd0), uart1(rxd), sd0(cmd), spi0(cs1), + sata1(prsnt), spi1(cs1) +mpp12 12 gpio, ge0(rxd1), i2c1(sda), sd0(d0), spi1(cs0), + audio(spdifi) +mpp13 13 gpio, ge0(rxd2), i2c1(sck), sd0(d1), tdm(pclk), + audio(rmclk) +mpp14 14 gpio, ge0(rxd3), pcie(clkreq0), sd0(d2), spi1(mosi), + spi0(cs2) +mpp15 15 gpio, ge0(rxctl), pcie(clkreq1), sd0(d3), spi1(miso), + spi0(cs3) +mpp16 16 gpio, ge0(rxclk), uart1(rxd), tdm(int), audio(extclk) +mpp17 17 gpo, ge(mdc) +mpp18 18 gpio, ge(mdio) +mpp19 19 gpio, ge0(txclk), ge1(txclkout), tdm(pclk) +mpp20 20 gpo, ge0(txd4), ge1(txd0) +mpp21 21 gpo, ge0(txd5), ge1(txd1), uart1(txd) +mpp22 22 gpo, ge0(txd6), ge1(txd2), uart0(rts) +mpp23 23 gpo, ge0(txd7), ge1(txd3), spi1(mosi) +mpp24 24 gpio, ge0(col), ge1(txctl), spi1(cs0) +mpp25 25 gpio, ge0(rxerr), ge1(rxd0), uart1(rxd) +mpp26 26 gpio, ge0(crs), ge1(rxd1), spi1(miso) +mpp27 27 gpio, ge0(rxd4), ge1(rxd2), uart0(cts) +mpp28 28 gpio, ge0(rxd5), ge1(rxd3) +mpp29 29 gpio, ge0(rxd6), ge1(rxctl), i2c1(sda) +mpp30 30 gpio, ge0(rxd7), ge1(rxclk), i2c1(sck) +mpp31 31 gpio, tclk, ge0(txerr) +mpp32 32 gpio, spi0(cs0) +mpp33 33 gpio, dev(bootcs), spi0(cs0) +mpp34 34 gpo, dev(wen0), spi0(mosi) +mpp35 35 gpo, dev(oen), spi0(sck) +mpp36 36 gpo, dev(a1), spi0(miso) +mpp37 37 gpo, dev(a0), sata0(prsnt) +mpp38 38 gpio, dev(ready), uart1(cts), uart0(cts) +mpp39 39 gpo, dev(ad0), audio(spdifo) +mpp40 40 gpio, dev(ad1), uart1(rts), uart0(rts) +mpp41 41 gpio, dev(ad2), uart1(rxd) +mpp42 42 gpo, dev(ad3), uart1(txd) +mpp43 43 gpo, dev(ad4), audio(bclk) +mpp44 44 gpo, dev(ad5), audio(mclk) +mpp45 45 gpo, dev(ad6), audio(lrclk) +mpp46 46 gpo, dev(ad7), audio(sdo) +mpp47 47 gpo, dev(ad8), sd0(clk), audio(spdifo) +mpp48 48 gpio, dev(ad9), uart0(rts), sd0(cmd), sata1(prsnt), + spi0(cs1) +mpp49 49 gpio, dev(ad10), pcie(clkreq1), sd0(d0), spi1(cs0), + audio(spdifi) +mpp50 50 gpio, dev(ad11), uart0(cts), sd0(d1), spi1(miso), + audio(rmclk) +mpp51 51 gpio, dev(ad12), i2c1(sda), sd0(d2), spi1(mosi) +mpp52 52 gpio, dev(ad13), i2c1(sck), sd0(d3), spi1(sck) +mpp53 53 gpio, dev(ad14), sd0(clk), tdm(pclk), spi0(cs2), + pcie(clkreq1) +mpp54 54 gpo, dev(ad15), tdm(dtx) +mpp55 55 gpio, dev(cs1), uart1(txd), tdm(rst), sata1(prsnt), + sata0(prsnt) +mpp56 56 gpio, dev(cs2), uart1(cts), uart0(cts), spi0(cs3), + pcie(clkreq0), spi1(cs1) +mpp57 57 gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt), + audio(sdo) +mpp58 58 gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk), + uart0(rts) +mpp59 59 gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk) +mpp60 60 gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rst-out), + audio(sdi) +mpp61 61 gpo, dev(wen1), uart1(txd), audio(rclk) +mpp62 62 gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0), + audio(mclk), uart0(cts) +mpp63 63 gpo, spi0(sck), tclk +mpp64 64 gpio, spi0(miso), spi0-1(cs1) +mpp65 65 gpio, spi0(mosi), spi0-1(cs2) diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 31c0bba..e16b8b0 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -159,6 +159,10 @@ config PINCTRL_KIRKWOOD bool select PINCTRL_MVEBU +config PINCTRL_ARMADA_370 + bool + select PINCTRL_MVEBU + source "drivers/pinctrl/spear/Kconfig" endmenu diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 3006294..e6d6667 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -32,5 +32,6 @@ obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o obj-$(CONFIG_PINCTRL_MVEBU) += pinctrl-mvebu.o obj-$(CONFIG_PINCTRL_DOVE) += pinctrl-dove.o obj-$(CONFIG_PINCTRL_KIRKWOOD) += pinctrl-kirkwood.o +obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/pinctrl/pinctrl-armada-370.c b/drivers/pinctrl/pinctrl-armada-370.c new file mode 100644 index 0000000..c907647 --- /dev/null +++ b/drivers/pinctrl/pinctrl-armada-370.c @@ -0,0 +1,421 @@ +/* + * Marvell Armada 370 pinctrl driver based on mvebu pinctrl core + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pinctrl-mvebu.h" + +static struct mvebu_mpp_mode mv88f6710_mpp_modes[] = { + MPP_MODE(0, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "uart0", "rxd")), + MPP_MODE(1, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "uart0", "txd")), + MPP_MODE(2, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "i2c0", "sck"), + MPP_FUNCTION(0x2, "uart0", "txd")), + MPP_MODE(3, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "i2c0", "sda"), + MPP_FUNCTION(0x2, "uart0", "rxd")), + MPP_MODE(4, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "cpu_pd", "vdd")), + MPP_MODE(5, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "ge0", "txclko"), + MPP_FUNCTION(0x2, "uart1", "txd"), + MPP_FUNCTION(0x4, "spi1", "clk"), + MPP_FUNCTION(0x5, "audio", "mclk")), + MPP_MODE(6, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "txd0"), + MPP_FUNCTION(0x2, "sata0", "prsnt"), + MPP_FUNCTION(0x4, "tdm", "rst"), + MPP_FUNCTION(0x5, "audio", "sdo")), + MPP_MODE(7, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "ge0", "txd1"), + MPP_FUNCTION(0x4, "tdm", "tdx"), + MPP_FUNCTION(0x5, "audio", "lrclk")), + MPP_MODE(8, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "txd2"), + MPP_FUNCTION(0x2, "uart0", "rts"), + MPP_FUNCTION(0x4, "tdm", "drx"), + MPP_FUNCTION(0x5, "audio", "bclk")), + MPP_MODE(9, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "ge0", "txd3"), + MPP_FUNCTION(0x2, "uart1", "txd"), + MPP_FUNCTION(0x3, "sd0", "clk"), + MPP_FUNCTION(0x5, "audio", "spdifo")), + MPP_MODE(10, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "txctl"), + MPP_FUNCTION(0x2, "uart0", "cts"), + MPP_FUNCTION(0x4, "tdm", "fsync"), + MPP_FUNCTION(0x5, "audio", "sdi")), + MPP_MODE(11, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "rxd0"), + MPP_FUNCTION(0x2, "uart1", "rxd"), + MPP_FUNCTION(0x3, "sd0", "cmd"), + MPP_FUNCTION(0x4, "spi0", "cs1"), + MPP_FUNCTION(0x5, "sata1", "prsnt"), + MPP_FUNCTION(0x6, "spi1", "cs1")), + MPP_MODE(12, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "rxd1"), + MPP_FUNCTION(0x2, "i2c1", "sda"), + MPP_FUNCTION(0x3, "sd0", "d0"), + MPP_FUNCTION(0x4, "spi1", "cs0"), + MPP_FUNCTION(0x5, "audio", "spdifi")), + MPP_MODE(13, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "rxd2"), + MPP_FUNCTION(0x2, "i2c1", "sck"), + MPP_FUNCTION(0x3, "sd0", "d1"), + MPP_FUNCTION(0x4, "tdm", "pclk"), + MPP_FUNCTION(0x5, "audio", "rmclk")), + MPP_MODE(14, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "rxd3"), + MPP_FUNCTION(0x2, "pcie", "clkreq0"), + MPP_FUNCTION(0x3, "sd0", "d2"), + MPP_FUNCTION(0x4, "spi1", "mosi"), + MPP_FUNCTION(0x5, "spi0", "cs2")), + MPP_MODE(15, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "rxctl"), + MPP_FUNCTION(0x2, "pcie", "clkreq1"), + MPP_FUNCTION(0x3, "sd0", "d3"), + MPP_FUNCTION(0x4, "spi1", "miso"), + MPP_FUNCTION(0x5, "spi0", "cs3")), + MPP_MODE(16, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "rxclk"), + MPP_FUNCTION(0x2, "uart1", "rxd"), + MPP_FUNCTION(0x4, "tdm", "int"), + MPP_FUNCTION(0x5, "audio", "extclk")), + MPP_MODE(17, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "ge", "mdc")), + MPP_MODE(18, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge", "mdio")), + MPP_MODE(19, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "txclk"), + MPP_FUNCTION(0x2, "ge1", "txclkout"), + MPP_FUNCTION(0x4, "tdm", "pclk")), + MPP_MODE(20, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "ge0", "txd4"), + MPP_FUNCTION(0x2, "ge1", "txd0")), + MPP_MODE(21, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "ge0", "txd5"), + MPP_FUNCTION(0x2, "ge1", "txd1"), + MPP_FUNCTION(0x4, "uart1", "txd")), + MPP_MODE(22, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "ge0", "txd6"), + MPP_FUNCTION(0x2, "ge1", "txd2"), + MPP_FUNCTION(0x4, "uart0", "rts")), + MPP_MODE(23, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "ge0", "txd7"), + MPP_FUNCTION(0x2, "ge1", "txd3"), + MPP_FUNCTION(0x4, "spi1", "mosi")), + MPP_MODE(24, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "col"), + MPP_FUNCTION(0x2, "ge1", "txctl"), + MPP_FUNCTION(0x4, "spi1", "cs0")), + MPP_MODE(25, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "rxerr"), + MPP_FUNCTION(0x2, "ge1", "rxd0"), + MPP_FUNCTION(0x4, "uart1", "rxd")), + MPP_MODE(26, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "crs"), + MPP_FUNCTION(0x2, "ge1", "rxd1"), + MPP_FUNCTION(0x4, "spi1", "miso")), + MPP_MODE(27, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "rxd4"), + MPP_FUNCTION(0x2, "ge1", "rxd2"), + MPP_FUNCTION(0x4, "uart0", "cts")), + MPP_MODE(28, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "rxd5"), + MPP_FUNCTION(0x2, "ge1", "rxd3")), + MPP_MODE(29, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "rxd6"), + MPP_FUNCTION(0x2, "ge1", "rxctl"), + MPP_FUNCTION(0x4, "i2c1", "sda")), + MPP_MODE(30, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "ge0", "rxd7"), + MPP_FUNCTION(0x2, "ge1", "rxclk"), + MPP_FUNCTION(0x4, "i2c1", "sck")), + MPP_MODE(31, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x3, "tclk", NULL), + MPP_FUNCTION(0x4, "ge0", "txerr")), + MPP_MODE(32, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "spi0", "cs0")), + MPP_MODE(33, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "bootcs"), + MPP_FUNCTION(0x2, "spi0", "cs0")), + MPP_MODE(34, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "wen0"), + MPP_FUNCTION(0x2, "spi0", "mosi")), + MPP_MODE(35, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "oen"), + MPP_FUNCTION(0x2, "spi0", "sck")), + MPP_MODE(36, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "a1"), + MPP_FUNCTION(0x2, "spi0", "miso")), + MPP_MODE(37, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "a0"), + MPP_FUNCTION(0x2, "sata0", "prsnt")), + MPP_MODE(38, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "ready"), + MPP_FUNCTION(0x2, "uart1", "cts"), + MPP_FUNCTION(0x3, "uart0", "cts")), + MPP_MODE(39, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "ad0"), + MPP_FUNCTION(0x2, "audio", "spdifo")), + MPP_MODE(40, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "ad1"), + MPP_FUNCTION(0x2, "uart1", "rts"), + MPP_FUNCTION(0x3, "uart0", "rts")), + MPP_MODE(41, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "ad2"), + MPP_FUNCTION(0x2, "uart1", "rxd")), + MPP_MODE(42, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "ad3"), + MPP_FUNCTION(0x2, "uart1", "txd")), + MPP_MODE(43, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "ad4"), + MPP_FUNCTION(0x2, "audio", "bclk")), + MPP_MODE(44, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "ad5"), + MPP_FUNCTION(0x2, "audio", "mclk")), + MPP_MODE(45, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "ad6"), + MPP_FUNCTION(0x2, "audio", "lrclk")), + MPP_MODE(46, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "ad7"), + MPP_FUNCTION(0x2, "audio", "sdo")), + MPP_MODE(47, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "ad8"), + MPP_FUNCTION(0x3, "sd0", "clk"), + MPP_FUNCTION(0x5, "audio", "spdifo")), + MPP_MODE(48, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "ad9"), + MPP_FUNCTION(0x2, "uart0", "rts"), + MPP_FUNCTION(0x3, "sd0", "cmd"), + MPP_FUNCTION(0x4, "sata1", "prsnt"), + MPP_FUNCTION(0x5, "spi0", "cs1")), + MPP_MODE(49, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "ad10"), + MPP_FUNCTION(0x2, "pcie", "clkreq1"), + MPP_FUNCTION(0x3, "sd0", "d0"), + MPP_FUNCTION(0x4, "spi1", "cs0"), + MPP_FUNCTION(0x5, "audio", "spdifi")), + MPP_MODE(50, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "ad11"), + MPP_FUNCTION(0x2, "uart0", "cts"), + MPP_FUNCTION(0x3, "sd0", "d1"), + MPP_FUNCTION(0x4, "spi1", "miso"), + MPP_FUNCTION(0x5, "audio", "rmclk")), + MPP_MODE(51, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "ad12"), + MPP_FUNCTION(0x2, "i2c1", "sda"), + MPP_FUNCTION(0x3, "sd0", "d2"), + MPP_FUNCTION(0x4, "spi1", "mosi")), + MPP_MODE(52, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "ad13"), + MPP_FUNCTION(0x2, "i2c1", "sck"), + MPP_FUNCTION(0x3, "sd0", "d3"), + MPP_FUNCTION(0x4, "spi1", "sck")), + MPP_MODE(53, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "ad14"), + MPP_FUNCTION(0x2, "sd0", "clk"), + MPP_FUNCTION(0x3, "tdm", "pclk"), + MPP_FUNCTION(0x4, "spi0", "cs2"), + MPP_FUNCTION(0x5, "pcie", "clkreq1")), + MPP_MODE(54, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "ad15"), + MPP_FUNCTION(0x3, "tdm", "dtx")), + MPP_MODE(55, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "cs1"), + MPP_FUNCTION(0x2, "uart1", "txd"), + MPP_FUNCTION(0x3, "tdm", "rst"), + MPP_FUNCTION(0x4, "sata1", "prsnt"), + MPP_FUNCTION(0x5, "sata0", "prsnt")), + MPP_MODE(56, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "cs2"), + MPP_FUNCTION(0x2, "uart1", "cts"), + MPP_FUNCTION(0x3, "uart0", "cts"), + MPP_FUNCTION(0x4, "spi0", "cs3"), + MPP_FUNCTION(0x5, "pcie", "clkreq0"), + MPP_FUNCTION(0x6, "spi1", "cs1")), + MPP_MODE(57, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "cs3"), + MPP_FUNCTION(0x2, "uart1", "rxd"), + MPP_FUNCTION(0x3, "tdm", "fsync"), + MPP_FUNCTION(0x4, "sata0", "prsnt"), + MPP_FUNCTION(0x5, "audio", "sdo")), + MPP_MODE(58, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "cs0"), + MPP_FUNCTION(0x2, "uart1", "rts"), + MPP_FUNCTION(0x3, "tdm", "int"), + MPP_FUNCTION(0x5, "audio", "extclk"), + MPP_FUNCTION(0x6, "uart0", "rts")), + MPP_MODE(59, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "ale0"), + MPP_FUNCTION(0x2, "uart1", "rts"), + MPP_FUNCTION(0x3, "uart0", "rts"), + MPP_FUNCTION(0x5, "audio", "bclk")), + MPP_MODE(60, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "ale1"), + MPP_FUNCTION(0x2, "uart1", "rxd"), + MPP_FUNCTION(0x3, "sata0", "prsnt"), + MPP_FUNCTION(0x4, "pcie", "rst-out"), + MPP_FUNCTION(0x5, "audio", "sdi")), + MPP_MODE(61, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "dev", "wen1"), + MPP_FUNCTION(0x2, "uart1", "txd"), + MPP_FUNCTION(0x5, "audio", "rclk")), + MPP_MODE(62, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "dev", "a2"), + MPP_FUNCTION(0x2, "uart1", "cts"), + MPP_FUNCTION(0x3, "tdm", "drx"), + MPP_FUNCTION(0x4, "pcie", "clkreq0"), + MPP_FUNCTION(0x5, "audio", "mclk"), + MPP_FUNCTION(0x6, "uart0", "cts")), + MPP_MODE(63, + MPP_FUNCTION(0x0, "gpo", NULL), + MPP_FUNCTION(0x1, "spi0", "sck"), + MPP_FUNCTION(0x2, "tclk", NULL)), + MPP_MODE(64, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "spi0", "miso"), + MPP_FUNCTION(0x2, "spi0-1", "cs1")), + MPP_MODE(65, + MPP_FUNCTION(0x0, "gpio", NULL), + MPP_FUNCTION(0x1, "spi0", "mosi"), + MPP_FUNCTION(0x2, "spi0-1", "cs2")), +}; + +static struct mvebu_pinctrl_soc_info armada_370_pinctrl_info; + +static struct of_device_id armada_370_pinctrl_of_match[] __devinitdata = { + { .compatible = "marvell,mv88f6710-pinctrl" }, + { }, +}; + +static struct mvebu_mpp_ctrl mv88f6710_mpp_controls[] = { + MPP_REG_CTRL(0, 65), +}; + +static struct pinctrl_gpio_range mv88f6710_mpp_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 32), + MPP_GPIO_RANGE(1, 32, 32, 32), + MPP_GPIO_RANGE(2, 64, 64, 2), +}; + +static int __devinit armada_370_pinctrl_probe(struct platform_device *pdev) +{ + struct mvebu_pinctrl_soc_info *soc = &armada_370_pinctrl_info; + + soc->variant = 0; /* no variants for Armada 370 */ + soc->controls = mv88f6710_mpp_controls; + soc->ncontrols = ARRAY_SIZE(mv88f6710_mpp_controls); + soc->modes = mv88f6710_mpp_modes; + soc->nmodes = ARRAY_SIZE(mv88f6710_mpp_modes); + soc->gpioranges = mv88f6710_mpp_gpio_ranges; + soc->ngpioranges = ARRAY_SIZE(mv88f6710_mpp_gpio_ranges); + + pdev->dev.platform_data = soc; + + return mvebu_pinctrl_probe(pdev); +} + +static int __devexit armada_370_pinctrl_remove(struct platform_device *pdev) +{ + return mvebu_pinctrl_remove(pdev); +} + +static struct platform_driver armada_370_pinctrl_driver = { + .driver = { + .name = "armada-370-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(armada_370_pinctrl_of_match), + }, + .probe = armada_370_pinctrl_probe, + .remove = __devexit_p(armada_370_pinctrl_remove), +}; + +module_platform_driver(armada_370_pinctrl_driver); + +MODULE_AUTHOR("Thomas Petazzoni "); +MODULE_DESCRIPTION("Marvell Armada 370 pinctrl driver"); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 463e270f766aa8dd2b782d4b8bd87260eb595aa2 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 13 Sep 2012 17:41:47 +0200 Subject: pinctrl: mvebu: add pinctrl driver for Armada XP This pinctrl driver is not a full-blown pinctrl driver from scratch: it relies on the common pinctrl-mvebu driver, which is used for all Marvell EBU SoCs. Signed-off-by: Thomas Petazzoni Acked-by: Linus Walleij Acked-by: Thomas Petazzoni Tested-by: Thomas Petazzoni Reviewed-by: Stephen Warren Signed-off-by: Jason Cooper diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt new file mode 100644 index 0000000..bfa0a2e --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt @@ -0,0 +1,100 @@ +* Marvell Armada XP SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,mv78230-pinctrl", "marvell,mv78260-pinctrl", + "marvell,mv78460-pinctrl" + +This driver supports all Armada XP variants, i.e. mv78230, mv78260, and mv78460. + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +* Marvell Armada XP (all variants) + +name pins functions +================================================================================ +mpp0 0 gpio, ge0(txclko), lcd(d0) +mpp1 1 gpio, ge0(txd0), lcd(d1) +mpp2 2 gpio, ge0(txd1), lcd(d2) +mpp3 3 gpio, ge0(txd2), lcd(d3) +mpp4 4 gpio, ge0(txd3), lcd(d4) +mpp5 5 gpio, ge0(txctl), lcd(d5) +mpp6 6 gpio, ge0(rxd0), lcd(d6) +mpp7 7 gpio, ge0(rxd1), lcd(d7) +mpp8 8 gpio, ge0(rxd2), lcd(d8) +mpp9 9 gpio, ge0(rxd3), lcd(d9) +mpp10 10 gpio, ge0(rxctl), lcd(d10) +mpp11 11 gpio, ge0(rxclk), lcd(d11) +mpp12 12 gpio, ge0(txd4), ge1(txd0), lcd(d12) +mpp13 13 gpio, ge0(txd5), ge1(txd1), lcd(d13) +mpp14 14 gpio, ge0(txd6), ge1(txd2), lcd(d15) +mpp15 15 gpio, ge0(txd7), ge1(txd3), lcd(d16) +mpp16 16 gpio, ge0(txd7), ge1(txd3), lcd(d16) +mpp17 17 gpio, ge0(col), ge1(txctl), lcd(d17) +mpp18 18 gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig) +mpp19 19 gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq) +mpp20 20 gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk) +mpp21 21 gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat) +mpp22 22 gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt) +mpp23 23 gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt) +mpp24 24 gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst) +mpp25 25 gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk) +mpp26 26 gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd) +mpp27 27 gpio, lcd(e), tdm(dtx), ptp(trig) +mpp28 28 gpio, lcd(pwm), tdm(drx), ptp(evreq) +mpp29 29 gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd) +mpp30 30 gpio, tdm(int1), sd0(clk) +mpp31 31 gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd) +mpp32 32 gpio, tdm(int3), sd0(d0), vdd(cpu1-pd) +mpp33 33 gpio, tdm(int4), sd0(d1), mem(bat) +mpp34 34 gpio, tdm(int5), sd0(d2), sata0(prsnt) +mpp35 35 gpio, tdm(int6), sd0(d3), sata1(prsnt) +mpp36 36 gpio, spi(mosi) +mpp37 37 gpio, spi(miso) +mpp38 38 gpio, spi(sck) +mpp39 39 gpio, spi(cs0) +mpp40 40 gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd), + pcie(clkreq0) +mpp41 41 gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt), + pcie(clkreq1) +mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer), + vdd(cpu0-pd) +mpp43 43 gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout), + vdd(cpu2-3-pd){1} +mpp44 44 gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2), + mem(bat) +mpp45 45 gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt) +mpp46 46 gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt) +mpp47 47 gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3), + ref(clkout) +mpp48 48 gpio, tclk, dev(burst/last) + +* Marvell Armada XP (mv78260 and mv78460 only) + +name pins functions +================================================================================ +mpp49 49 gpio, dev(we3) +mpp50 50 gpio, dev(we2) +mpp51 51 gpio, dev(ad16) +mpp52 52 gpio, dev(ad17) +mpp53 53 gpio, dev(ad18) +mpp54 54 gpio, dev(ad19) +mpp55 55 gpio, dev(ad20), vdd(cpu0-pd) +mpp56 56 gpio, dev(ad21), vdd(cpu1-pd) +mpp57 57 gpio, dev(ad22), vdd(cpu2-3-pd){1} +mpp58 58 gpio, dev(ad23) +mpp59 59 gpio, dev(ad24) +mpp60 60 gpio, dev(ad25) +mpp61 61 gpio, dev(ad26) +mpp62 62 gpio, dev(ad27) +mpp63 63 gpio, dev(ad28) +mpp64 64 gpio, dev(ad29) +mpp65 65 gpio, dev(ad30) +mpp66 66 gpio, dev(ad31) + +Notes: +* {1} vdd(cpu2-3-pd) only available on mv78460. diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index e16b8b0..a754144 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -163,6 +163,10 @@ config PINCTRL_ARMADA_370 bool select PINCTRL_MVEBU +config PINCTRL_ARMADA_XP + bool + select PINCTRL_MVEBU + source "drivers/pinctrl/spear/Kconfig" endmenu diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index e6d6667..f2ea050 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -33,5 +33,6 @@ obj-$(CONFIG_PINCTRL_MVEBU) += pinctrl-mvebu.o obj-$(CONFIG_PINCTRL_DOVE) += pinctrl-dove.o obj-$(CONFIG_PINCTRL_KIRKWOOD) += pinctrl-kirkwood.o obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o +obj-$(CONFIG_PINCTRL_ARMADA_XP) += pinctrl-armada-xp.o obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/pinctrl/pinctrl-armada-xp.c b/drivers/pinctrl/pinctrl-armada-xp.c new file mode 100644 index 0000000..40bd52a --- /dev/null +++ b/drivers/pinctrl/pinctrl-armada-xp.c @@ -0,0 +1,468 @@ +/* + * Marvell Armada XP pinctrl driver based on mvebu pinctrl core + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This file supports the three variants of Armada XP SoCs that are + * available: mv78230, mv78260 and mv78460. From a pin muxing + * perspective, the mv78230 has 49 MPP pins. The mv78260 and mv78460 + * both have 67 MPP pins (more GPIOs and address lines for the memory + * bus mainly). The only difference between the mv78260 and the + * mv78460 in terms of pin muxing is the addition of two functions on + * pins 43 and 56 to access the VDD of the CPU2 and 3 (mv78260 has two + * cores, mv78460 has four cores). + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pinctrl-mvebu.h" + +enum armada_xp_variant { + V_MV78230 = BIT(0), + V_MV78260 = BIT(1), + V_MV78460 = BIT(2), + V_MV78230_PLUS = (V_MV78230 | V_MV78260 | V_MV78460), + V_MV78260_PLUS = (V_MV78260 | V_MV78460), +}; + +static struct mvebu_mpp_mode armada_xp_mpp_modes[] = { + MPP_MODE(0, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "txclko", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d0", V_MV78230_PLUS)), + MPP_MODE(1, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "txd0", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d1", V_MV78230_PLUS)), + MPP_MODE(2, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "txd1", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d2", V_MV78230_PLUS)), + MPP_MODE(3, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "txd2", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d3", V_MV78230_PLUS)), + MPP_MODE(4, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "txd3", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d4", V_MV78230_PLUS)), + MPP_MODE(5, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "txctl", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d5", V_MV78230_PLUS)), + MPP_MODE(6, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "rxd0", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d6", V_MV78230_PLUS)), + MPP_MODE(7, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "rxd1", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d7", V_MV78230_PLUS)), + MPP_MODE(8, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "rxd2", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d8", V_MV78230_PLUS)), + MPP_MODE(9, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "rxd3", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d9", V_MV78230_PLUS)), + MPP_MODE(10, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "rxctl", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d10", V_MV78230_PLUS)), + MPP_MODE(11, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "rxclk", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d11", V_MV78230_PLUS)), + MPP_MODE(12, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "txd4", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "ge1", "clkout", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d12", V_MV78230_PLUS)), + MPP_MODE(13, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "txd5", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "ge1", "txd0", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d13", V_MV78230_PLUS)), + MPP_MODE(14, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "txd6", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "ge1", "txd1", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d14", V_MV78230_PLUS)), + MPP_MODE(15, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "txd7", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "ge1", "txd2", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d15", V_MV78230_PLUS)), + MPP_MODE(16, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "txclk", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "ge1", "txd3", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d16", V_MV78230_PLUS)), + MPP_MODE(17, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "col", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "ge1", "txctl", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d17", V_MV78230_PLUS)), + MPP_MODE(18, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "rxerr", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "ge1", "rxd0", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "ptp", "trig", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d18", V_MV78230_PLUS)), + MPP_MODE(19, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "crs", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "ge1", "rxd1", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "ptp", "evreq", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d19", V_MV78230_PLUS)), + MPP_MODE(20, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "rxd4", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "ge1", "rxd2", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "ptp", "clk", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d20", V_MV78230_PLUS)), + MPP_MODE(21, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "rxd5", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "ge1", "rxd3", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "mem", "bat", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d21", V_MV78230_PLUS)), + MPP_MODE(22, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "rxd6", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "ge1", "rxctl", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "sata0", "prsnt", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d22", V_MV78230_PLUS)), + MPP_MODE(23, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ge0", "rxd7", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "ge1", "rxclk", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "sata1", "prsnt", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "d23", V_MV78230_PLUS)), + MPP_MODE(24, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "sata1", "prsnt", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "nf", "bootcs-re", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "tdm", "rst", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "hsync", V_MV78230_PLUS)), + MPP_MODE(25, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "sata0", "prsnt", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "nf", "bootcs-we", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "tdm", "pclk", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "vsync", V_MV78230_PLUS)), + MPP_MODE(26, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "tdm", "fsync", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "clk", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x5, "vdd", "cpu1-pd", V_MV78230_PLUS)), + MPP_MODE(27, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ptp", "trig", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "tdm", "dtx", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "e", V_MV78230_PLUS)), + MPP_MODE(28, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ptp", "evreq", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "tdm", "drx", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "pwm", V_MV78230_PLUS)), + MPP_MODE(29, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "ptp", "clk", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "tdm", "int0", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "ref-clk", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd", V_MV78230_PLUS)), + MPP_MODE(30, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "sd0", "clk", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "tdm", "int1", V_MV78230_PLUS)), + MPP_MODE(31, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "sd0", "cmd", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "tdm", "int2", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd", V_MV78230_PLUS)), + MPP_MODE(32, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "sd0", "d0", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "tdm", "int3", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x5, "vdd", "cpu1-pd", V_MV78230_PLUS)), + MPP_MODE(33, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "sd0", "d1", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "tdm", "int4", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "mem", "bat", V_MV78230_PLUS)), + MPP_MODE(34, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "sd0", "d2", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "sata0", "prsnt", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "tdm", "int5", V_MV78230_PLUS)), + MPP_MODE(35, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "sd0", "d3", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "sata1", "prsnt", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "tdm", "int6", V_MV78230_PLUS)), + MPP_MODE(36, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "spi", "mosi", V_MV78230_PLUS)), + MPP_MODE(37, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "spi", "miso", V_MV78230_PLUS)), + MPP_MODE(38, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "spi", "sck", V_MV78230_PLUS)), + MPP_MODE(39, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "spi", "cs0", V_MV78230_PLUS)), + MPP_MODE(40, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "spi", "cs1", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "uart2", "cts", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "vdd", "cpu1-pd", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "vga-hsync", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x5, "pcie", "clkreq0", V_MV78230_PLUS)), + MPP_MODE(41, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "spi", "cs2", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "uart2", "rts", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "sata1", "prsnt", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "lcd", "vga-vsync", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x5, "pcie", "clkreq1", V_MV78230_PLUS)), + MPP_MODE(42, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "uart2", "rxd", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "uart0", "cts", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "tdm", "int7", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "tdm-1", "timer", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd", V_MV78230_PLUS)), + MPP_MODE(43, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "uart2", "txd", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "uart0", "rts", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "spi", "cs3", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "pcie", "rstout", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x5, "vdd", "cpu2-3-pd", V_MV78460)), + MPP_MODE(44, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "uart2", "cts", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "uart3", "rxd", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "spi", "cs4", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "mem", "bat", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x5, "pcie", "clkreq2", V_MV78230_PLUS)), + MPP_MODE(45, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "uart2", "rts", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "uart3", "txd", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "spi", "cs5", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "sata1", "prsnt", V_MV78230_PLUS)), + MPP_MODE(46, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "uart3", "rts", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "uart1", "rts", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "spi", "cs6", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "sata0", "prsnt", V_MV78230_PLUS)), + MPP_MODE(47, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "uart3", "cts", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "uart1", "cts", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x3, "spi", "cs7", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x4, "ref", "clkout", V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x5, "pcie", "clkreq3", V_MV78230_PLUS)), + MPP_MODE(48, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x1, "tclk", NULL, V_MV78230_PLUS), + MPP_VAR_FUNCTION(0x2, "dev", "burst/last", V_MV78230_PLUS)), + MPP_MODE(49, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "we3", V_MV78260_PLUS)), + MPP_MODE(50, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "we2", V_MV78260_PLUS)), + MPP_MODE(51, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad16", V_MV78260_PLUS)), + MPP_MODE(52, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad17", V_MV78260_PLUS)), + MPP_MODE(53, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad18", V_MV78260_PLUS)), + MPP_MODE(54, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad19", V_MV78260_PLUS)), + MPP_MODE(55, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad20", V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x2, "vdd", "cpu0-pd", V_MV78260_PLUS)), + MPP_MODE(56, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad21", V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x2, "vdd", "cpu1-pd", V_MV78260_PLUS)), + MPP_MODE(57, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad22", V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x2, "vdd", "cpu2-3-pd", V_MV78460)), + MPP_MODE(58, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad23", V_MV78260_PLUS)), + MPP_MODE(59, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad24", V_MV78260_PLUS)), + MPP_MODE(60, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad25", V_MV78260_PLUS)), + MPP_MODE(61, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad26", V_MV78260_PLUS)), + MPP_MODE(62, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad27", V_MV78260_PLUS)), + MPP_MODE(63, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad28", V_MV78260_PLUS)), + MPP_MODE(64, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad29", V_MV78260_PLUS)), + MPP_MODE(65, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad30", V_MV78260_PLUS)), + MPP_MODE(66, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS), + MPP_VAR_FUNCTION(0x1, "dev", "ad31", V_MV78260_PLUS)), +}; + +static struct mvebu_pinctrl_soc_info armada_xp_pinctrl_info; + +static struct of_device_id armada_xp_pinctrl_of_match[] __devinitdata = { + { + .compatible = "marvell,mv78230-pinctrl", + .data = (void *) V_MV78230, + }, + { + .compatible = "marvell,mv78260-pinctrl", + .data = (void *) V_MV78260, + }, + { + .compatible = "marvell,mv78460-pinctrl", + .data = (void *) V_MV78460, + }, + { }, +}; + +static struct mvebu_mpp_ctrl mv78230_mpp_controls[] = { + MPP_REG_CTRL(0, 48), +}; + +static struct pinctrl_gpio_range mv78230_mpp_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 32), + MPP_GPIO_RANGE(1, 32, 32, 17), +}; + +static struct mvebu_mpp_ctrl mv78260_mpp_controls[] = { + MPP_REG_CTRL(0, 66), +}; + +static struct pinctrl_gpio_range mv78260_mpp_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 32), + MPP_GPIO_RANGE(1, 32, 32, 32), + MPP_GPIO_RANGE(2, 64, 64, 3), +}; + +static struct mvebu_mpp_ctrl mv78460_mpp_controls[] = { + MPP_REG_CTRL(0, 66), +}; + +static struct pinctrl_gpio_range mv78460_mpp_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 32), + MPP_GPIO_RANGE(1, 32, 32, 32), + MPP_GPIO_RANGE(2, 64, 64, 3), +}; + +static int __devinit armada_xp_pinctrl_probe(struct platform_device *pdev) +{ + struct mvebu_pinctrl_soc_info *soc = &armada_xp_pinctrl_info; + const struct of_device_id *match = + of_match_device(armada_xp_pinctrl_of_match, &pdev->dev); + + if (!match) + return -ENODEV; + + soc->variant = (unsigned) match->data & 0xff; + + switch (soc->variant) { + case V_MV78230: + soc->controls = mv78230_mpp_controls; + soc->ncontrols = ARRAY_SIZE(mv78230_mpp_controls); + soc->modes = armada_xp_mpp_modes; + /* We don't necessarily want the full list of the + * armada_xp_mpp_modes, but only the first 'n' ones + * that are available on this SoC */ + soc->nmodes = mv78230_mpp_controls[0].npins; + soc->gpioranges = mv78230_mpp_gpio_ranges; + soc->ngpioranges = ARRAY_SIZE(mv78230_mpp_gpio_ranges); + break; + case V_MV78260: + soc->controls = mv78260_mpp_controls; + soc->ncontrols = ARRAY_SIZE(mv78260_mpp_controls); + soc->modes = armada_xp_mpp_modes; + /* We don't necessarily want the full list of the + * armada_xp_mpp_modes, but only the first 'n' ones + * that are available on this SoC */ + soc->nmodes = mv78260_mpp_controls[0].npins; + soc->gpioranges = mv78260_mpp_gpio_ranges; + soc->ngpioranges = ARRAY_SIZE(mv78260_mpp_gpio_ranges); + break; + case V_MV78460: + soc->controls = mv78460_mpp_controls; + soc->ncontrols = ARRAY_SIZE(mv78460_mpp_controls); + soc->modes = armada_xp_mpp_modes; + /* We don't necessarily want the full list of the + * armada_xp_mpp_modes, but only the first 'n' ones + * that are available on this SoC */ + soc->nmodes = mv78460_mpp_controls[0].npins; + soc->gpioranges = mv78460_mpp_gpio_ranges; + soc->ngpioranges = ARRAY_SIZE(mv78460_mpp_gpio_ranges); + break; + } + + pdev->dev.platform_data = soc; + + return mvebu_pinctrl_probe(pdev); +} + +static int __devexit armada_xp_pinctrl_remove(struct platform_device *pdev) +{ + return mvebu_pinctrl_remove(pdev); +} + +static struct platform_driver armada_xp_pinctrl_driver = { + .driver = { + .name = "armada-xp-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(armada_xp_pinctrl_of_match), + }, + .probe = armada_xp_pinctrl_probe, + .remove = __devexit_p(armada_xp_pinctrl_remove), +}; + +module_platform_driver(armada_xp_pinctrl_driver); + +MODULE_AUTHOR("Thomas Petazzoni "); +MODULE_DESCRIPTION("Marvell Armada XP pinctrl driver"); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From f3b42b7ce0e541c97548e39d5b162538ca895609 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 13 Sep 2012 17:41:48 +0200 Subject: ARM: mvebu: Add pinctrl support to Armada XP SoCs This commits adds the necessary device tree information to define the compatible property for the pinctrl driver instance of Armada XP SoCs. Until now, the device tree representation considered the Armada XP as a single SoC. But in fact, there are three different SoCs in the Armada XP families, with different number of CPU cores, different number of Ethernet interfaces... and different number of muxable pins or functions. We therefore introduce three armada-xp-mv78xx0.dtsi for the three SoCs of the Armada XP family. The current armada-xp-db.dts evaluation board uses the MV78460 variant of the SoC. Signed-off-by: Thomas Petazzoni Acked-by: Linus Walleij Acked-by: Thomas Petazzoni Tested-by: Thomas Petazzoni Reviewed-by: Stephen Warren Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi new file mode 100644 index 0000000..38ede3d --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -0,0 +1,28 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada XP MV78230 SoC that are not + * common to all Armada XP SoCs. + */ + +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP MV78230 SoC"; + compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; + + soc { + pinctrl { + compatible = "marvell,mv78230-pinctrl"; + reg = <0xd0018000 0x38>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi new file mode 100644 index 0000000..b2eafcd --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -0,0 +1,28 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada XP MV78260 SoC that are not + * common to all Armada XP SoCs. + */ + +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP MV78260 SoC"; + compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; + + soc { + pinctrl { + compatible = "marvell,mv78260-pinctrl"; + reg = <0xd0018000 0x38>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi new file mode 100644 index 0000000..cf8624d --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -0,0 +1,28 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada XP MV78460 SoC that are not + * common to all Armada XP SoCs. + */ + +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP MV78460 SoC"; + compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; + + soc { + pinctrl { + compatible = "marvell,mv78460-pinctrl"; + reg = <0xd0018000 0x38>; + }; + }; + }; -- cgit v0.10.2 From d81b8bafc44b369b326b02af907554769e1b1434 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 13 Sep 2012 17:41:49 +0200 Subject: ARM: mvebu: Add pinctrl support to Armada 370 SoC This commits adds the necessary device tree information to define the compatible property for the pinctrl driver instance of Armada 370 SoC. Signed-off-by: Thomas Petazzoni Acked-by: Linus Walleij Acked-by: Thomas Petazzoni Tested-by: Thomas Petazzoni Reviewed-by: Stephen Warren Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 3228ccc..2bfb904 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -31,5 +31,10 @@ compatible = "marvell,armada-370-xp-system-controller"; reg = <0xd0018200 0x100>; }; + + pinctrl { + compatible = "marvell,mv88f6710-pinctrl"; + reg = <0xd0018000 0x38>; + }; }; }; -- cgit v0.10.2 From 0bec30a7e3c2b044d232d679b049fd0c0421ea09 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 13 Sep 2012 17:41:50 +0200 Subject: ARM: mvebu: adjust Armada XP evaluation board DTS The Armada XP evaluation board is based on the MV78460 Armava XP SoC. Now that we have separate .dtsi files for the three different SoCs of the Armada XP family, use the appropriate one as include for the Armada XP evaluation board .dts file. Signed-off-by: Thomas Petazzoni Acked-by: Linus Walleij Acked-by: Thomas Petazzoni Tested-by: Thomas Petazzoni Reviewed-by: Stephen Warren Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index f97040d..b1fc728 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -14,11 +14,11 @@ */ /dts-v1/; -/include/ "armada-xp.dtsi" +/include/ "armada-xp-mv78460.dtsi" / { model = "Marvell Armada XP Evaluation Board"; - compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp"; + compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; -- cgit v0.10.2 From 85077087d44fba222f61f22faa210b72cf4209ea Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 13 Sep 2012 17:41:51 +0200 Subject: arm: mvebu: split Kconfig options for Armada 370 and XP Until now, all the code for Armada 370 and XP was common, so we had a single Kconfig option to support all boards using both SoCs. With the addition of pinctrl drivers, this situation has changed: those two SoCs are radically different in terms of pinctrl, so they have two separate drivers. Since pinctrl drivers are typically select-ed from the SoC Kconfig option, it makes sense to split the 370/XP option into two separate options: one for Armada 370 and another for Armada XP. We keep an hidden option selected by both ARMADA_370 and ARMADA_XP in order to easily compile common code. A followup patch actually makes use of this split to select the appropriate pinctrl drivers. Signed-off-by: Thomas Petazzoni Acked-by: Gregory Clement Acked-by: Thomas Petazzoni Tested-by: Thomas Petazzoni Reviewed-by: Stephen Warren Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index caa2c5e..5540a8b 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -3,13 +3,23 @@ if ARCH_MVEBU menu "Marvell SOC with device tree" config MACH_ARMADA_370_XP - bool "Marvell Armada 370 and Aramada XP boards" + bool select ARMADA_370_XP_TIMER select CPU_V7 + +config MACH_ARMADA_370 + bool "Marvell Armada 370 boards" + select MACH_ARMADA_370_XP help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada 370 SoC with device tree. - Say 'Y' here if you want your kernel to support boards based on - Marvell Armada 370 or Armada XP with device tree. +config MACH_ARMADA_XP + bool "Marvell Armada XP boards" + select MACH_ARMADA_370_XP + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada XP SoC with device tree. endmenu -- cgit v0.10.2 From 5beb5f889e1de7e0bb89e9484c840c9dfa25da72 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 13 Sep 2012 17:41:52 +0200 Subject: arm: mvebu: select the pinctrl drivers for Armada 370 and Armada XP platforms This patch actually enables pinctrl drivers for Armada 370 and XP. Signed-off-by: Thomas Petazzoni Acked-by: Thomas Petazzoni Tested-by: Thomas Petazzoni Reviewed-by: Stephen Warren Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 5540a8b..a601a0b 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -10,6 +10,7 @@ config MACH_ARMADA_370_XP config MACH_ARMADA_370 bool "Marvell Armada 370 boards" select MACH_ARMADA_370_XP + select PINCTRL_ARMADA_370 help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada 370 SoC with device tree. @@ -17,6 +18,7 @@ config MACH_ARMADA_370 config MACH_ARMADA_XP bool "Marvell Armada XP boards" select MACH_ARMADA_370_XP + select PINCTRL_ARMADA_XP help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada XP SoC with device tree. -- cgit v0.10.2 From fefe7b0923459ee00dcbeb0b3510f746af791b09 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 19 Sep 2012 22:52:58 +0200 Subject: gpio: introduce gpio-mvebu driver for Marvell SoCs This driver aims at replacing the arch/arm/plat-orion/gpio.c driver, and is designed to be compatible with all Marvell EBU SoCs: Orion, Kirkwood, Dove, Armada 370/XP and Discovery. It has been successfully tested on Dove and Armada XP at the moment. Compared to the plat-orion driver, this new driver has the following added benefits: *) Support for Armada 370 and Armada XP *) It is integrated with the mvebu pinctrl driver so that GPIO pins are properly muxed, and the GPIO driver knows which GPIO pins are output-only or input-only. *) Properly placed in drivers/gpio *) More extensible mechanism to support platform differences. The plat-orion driver uses a simple mask-offset DT property, which works fine for Discovery MV78200 but not for Armada XP. The new driver uses different compatible strings to identify the different variants of the GPIO controllers. Signed-off-by: Thomas Petazzoni Cc: Grant Likely Cc: Linus Walleij Cc: Andrew Lunn Cc: Jason Cooper Cc: Gregory Clement Tested-by: Sebastian Hesselbarth Reviewed-by: Linus Walleij Tested-by: Andrew Lunn Acked-by: Arnd Bergmann Signed-off-by: Jason Cooper diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index ba7926f5..66a5951 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -150,6 +150,12 @@ config GPIO_MSM_V2 Qualcomm MSM chips. Most of the pins on the MSM can be selected for GPIO, and are controlled by this driver. +config GPIO_MVEBU + def_bool y + depends on ARCH_MVEBU + select GPIO_GENERIC + select GENERIC_IRQ_CHIP + config GPIO_MXC def_bool y depends on ARCH_MXC diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 153cace..1a33e67 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o +obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c new file mode 100644 index 0000000..902af43 --- /dev/null +++ b/drivers/gpio/gpio-mvebu.c @@ -0,0 +1,679 @@ +/* + * GPIO driver for Marvell SoCs + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * Andrew Lunn + * Sebastian Hesselbarth + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This driver is a fairly straightforward GPIO driver for the + * complete family of Marvell EBU SoC platforms (Orion, Dove, + * Kirkwood, Discovery, Armada 370/XP). The only complexity of this + * driver is the different register layout that exists between the + * non-SMP platforms (Orion, Dove, Kirkwood, Armada 370) and the SMP + * platforms (MV78200 from the Discovery family and the Armada + * XP). Therefore, this driver handles three variants of the GPIO + * block: + * - the basic variant, called "orion-gpio", with the simplest + * register set. Used on Orion, Dove, Kirkwoord, Armada 370 and + * non-SMP Discovery systems + * - the mv78200 variant for MV78200 Discovery systems. This variant + * turns the edge mask and level mask registers into CPU0 edge + * mask/level mask registers, and adds CPU1 edge mask/level mask + * registers. + * - the armadaxp variant for Armada XP systems. This variant keeps + * the normal cause/edge mask/level mask registers when the global + * interrupts are used, but adds per-CPU cause/edge mask/level mask + * registers n a separate memory area for the per-CPU GPIO + * interrupts. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * GPIO unit register offsets. + */ +#define GPIO_OUT_OFF 0x0000 +#define GPIO_IO_CONF_OFF 0x0004 +#define GPIO_BLINK_EN_OFF 0x0008 +#define GPIO_IN_POL_OFF 0x000c +#define GPIO_DATA_IN_OFF 0x0010 +#define GPIO_EDGE_CAUSE_OFF 0x0014 +#define GPIO_EDGE_MASK_OFF 0x0018 +#define GPIO_LEVEL_MASK_OFF 0x001c + +/* The MV78200 has per-CPU registers for edge mask and level mask */ +#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18) +#define GPIO_LEVEL_MASK_MV78200_OFF(cpu) ((cpu) ? 0x34 : 0x1C) + +/* The Armada XP has per-CPU registers for interrupt cause, interrupt + * mask and interrupt level mask. Those are relative to the + * percpu_membase. */ +#define GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu) ((cpu) * 0x4) +#define GPIO_EDGE_MASK_ARMADAXP_OFF(cpu) (0x10 + (cpu) * 0x4) +#define GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu) (0x20 + (cpu) * 0x4) + +#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1 +#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2 +#define MVEBU_GPIO_SOC_VARIANT_ARMADAXP 0x3 + +#define MVEBU_MAX_GPIO_PER_BANK 32 + +struct mvebu_gpio_chip { + struct gpio_chip chip; + spinlock_t lock; + void __iomem *membase; + void __iomem *percpu_membase; + unsigned int irqbase; + struct irq_domain *domain; + int soc_variant; +}; + +/* + * Functions returning addresses of individual registers for a given + * GPIO controller. + */ +static inline void __iomem *mvebu_gpioreg_out(struct mvebu_gpio_chip *mvchip) +{ + return mvchip->membase + GPIO_OUT_OFF; +} + +static inline void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip) +{ + return mvchip->membase + GPIO_IO_CONF_OFF; +} + +static inline void __iomem *mvebu_gpioreg_in_pol(struct mvebu_gpio_chip *mvchip) +{ + return mvchip->membase + GPIO_IN_POL_OFF; +} + +static inline void __iomem *mvebu_gpioreg_data_in(struct mvebu_gpio_chip *mvchip) +{ + return mvchip->membase + GPIO_DATA_IN_OFF; +} + +static inline void __iomem *mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip) +{ + int cpu; + + switch(mvchip->soc_variant) { + case MVEBU_GPIO_SOC_VARIANT_ORION: + case MVEBU_GPIO_SOC_VARIANT_MV78200: + return mvchip->membase + GPIO_EDGE_CAUSE_OFF; + case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: + cpu = smp_processor_id(); + return mvchip->percpu_membase + GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu); + default: + BUG(); + } +} + +static inline void __iomem *mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip) +{ + int cpu; + + switch(mvchip->soc_variant) { + case MVEBU_GPIO_SOC_VARIANT_ORION: + return mvchip->membase + GPIO_EDGE_MASK_OFF; + case MVEBU_GPIO_SOC_VARIANT_MV78200: + cpu = smp_processor_id(); + return mvchip->membase + GPIO_EDGE_MASK_MV78200_OFF(cpu); + case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: + cpu = smp_processor_id(); + return mvchip->percpu_membase + GPIO_EDGE_MASK_ARMADAXP_OFF(cpu); + default: + BUG(); + } +} + +static void __iomem *mvebu_gpioreg_level_mask(struct mvebu_gpio_chip *mvchip) +{ + int cpu; + + switch(mvchip->soc_variant) { + case MVEBU_GPIO_SOC_VARIANT_ORION: + return mvchip->membase + GPIO_LEVEL_MASK_OFF; + case MVEBU_GPIO_SOC_VARIANT_MV78200: + cpu = smp_processor_id(); + return mvchip->membase + GPIO_LEVEL_MASK_MV78200_OFF(cpu); + case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: + cpu = smp_processor_id(); + return mvchip->percpu_membase + GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu); + default: + BUG(); + } +} + +/* + * Functions implementing the gpio_chip methods + */ + +int mvebu_gpio_request(struct gpio_chip *chip, unsigned pin) +{ + return pinctrl_request_gpio(chip->base + pin); +} + +void mvebu_gpio_free(struct gpio_chip *chip, unsigned pin) +{ + pinctrl_free_gpio(chip->base + pin); +} + +static void mvebu_gpio_set(struct gpio_chip *chip, unsigned pin, int value) +{ + struct mvebu_gpio_chip *mvchip = + container_of(chip, struct mvebu_gpio_chip, chip); + unsigned long flags; + u32 u; + + spin_lock_irqsave(&mvchip->lock, flags); + u = readl_relaxed(mvebu_gpioreg_out(mvchip)); + if (value) + u |= 1 << pin; + else + u &= ~(1 << pin); + writel_relaxed(u, mvebu_gpioreg_out(mvchip)); + spin_unlock_irqrestore(&mvchip->lock, flags); +} + +static int mvebu_gpio_get(struct gpio_chip *chip, unsigned pin) +{ + struct mvebu_gpio_chip *mvchip = + container_of(chip, struct mvebu_gpio_chip, chip); + u32 u; + + if (readl_relaxed(mvebu_gpioreg_io_conf(mvchip)) & (1 << pin)) { + u = readl_relaxed(mvebu_gpioreg_data_in(mvchip)) ^ + readl_relaxed(mvebu_gpioreg_in_pol(mvchip)); + } else { + u = readl_relaxed(mvebu_gpioreg_out(mvchip)); + } + + return (u >> pin) & 1; +} + +static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned pin) +{ + struct mvebu_gpio_chip *mvchip = + container_of(chip, struct mvebu_gpio_chip, chip); + unsigned long flags; + int ret; + u32 u; + + /* Check with the pinctrl driver whether this pin is usable as + * an input GPIO */ + ret = pinctrl_gpio_direction_input(chip->base + pin); + if (ret) + return ret; + + spin_lock_irqsave(&mvchip->lock, flags); + u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip)); + u |= 1 << pin; + writel_relaxed(u, mvebu_gpioreg_io_conf(mvchip)); + spin_unlock_irqrestore(&mvchip->lock, flags); + + return 0; +} + +static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned pin, + int value) +{ + struct mvebu_gpio_chip *mvchip = + container_of(chip, struct mvebu_gpio_chip, chip); + unsigned long flags; + int ret; + u32 u; + + /* Check with the pinctrl driver whether this pin is usable as + * an output GPIO */ + ret = pinctrl_gpio_direction_output(chip->base + pin); + if (ret) + return ret; + + spin_lock_irqsave(&mvchip->lock, flags); + u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip)); + u &= ~(1 << pin); + writel_relaxed(u, mvebu_gpioreg_io_conf(mvchip)); + spin_unlock_irqrestore(&mvchip->lock, flags); + + return 0; +} + +static int mvebu_gpio_to_irq(struct gpio_chip *chip, unsigned pin) +{ + struct mvebu_gpio_chip *mvchip = + container_of(chip, struct mvebu_gpio_chip, chip); + return irq_create_mapping(mvchip->domain, pin); +} + +/* + * Functions implementing the irq_chip methods + */ +static void mvebu_gpio_irq_ack(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mvebu_gpio_chip *mvchip = gc->private; + u32 mask = ~(1 << (d->irq - gc->irq_base)); + + irq_gc_lock(gc); + writel_relaxed(mask, mvebu_gpioreg_edge_cause(mvchip)); + irq_gc_unlock(gc); +} + +static void mvebu_gpio_edge_irq_mask(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mvebu_gpio_chip *mvchip = gc->private; + u32 mask = 1 << (d->irq - gc->irq_base); + + irq_gc_lock(gc); + gc->mask_cache &= ~mask; + writel_relaxed(gc->mask_cache, mvebu_gpioreg_edge_mask(mvchip)); + irq_gc_unlock(gc); +} + +static void mvebu_gpio_edge_irq_unmask(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mvebu_gpio_chip *mvchip = gc->private; + u32 mask = 1 << (d->irq - gc->irq_base); + + irq_gc_lock(gc); + gc->mask_cache |= mask; + writel_relaxed(gc->mask_cache, mvebu_gpioreg_edge_mask(mvchip)); + irq_gc_unlock(gc); +} + +static void mvebu_gpio_level_irq_mask(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mvebu_gpio_chip *mvchip = gc->private; + u32 mask = 1 << (d->irq - gc->irq_base); + + irq_gc_lock(gc); + gc->mask_cache &= ~mask; + writel_relaxed(gc->mask_cache, mvebu_gpioreg_level_mask(mvchip)); + irq_gc_unlock(gc); +} + +static void mvebu_gpio_level_irq_unmask(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mvebu_gpio_chip *mvchip = gc->private; + u32 mask = 1 << (d->irq - gc->irq_base); + + irq_gc_lock(gc); + gc->mask_cache |= mask; + writel_relaxed(gc->mask_cache, mvebu_gpioreg_level_mask(mvchip)); + irq_gc_unlock(gc); +} + +/***************************************************************************** + * MVEBU GPIO IRQ + * + * GPIO_IN_POL register controls whether GPIO_DATA_IN will hold the same + * value of the line or the opposite value. + * + * Level IRQ handlers: DATA_IN is used directly as cause register. + * Interrupt are masked by LEVEL_MASK registers. + * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE. + * Interrupt are masked by EDGE_MASK registers. + * Both-edge handlers: Similar to regular Edge handlers, but also swaps + * the polarity to catch the next line transaction. + * This is a race condition that might not perfectly + * work on some use cases. + * + * Every eight GPIO lines are grouped (OR'ed) before going up to main + * cause register. + * + * EDGE cause mask + * data-in /--------| |-----| |----\ + * -----| |----- ---- to main cause reg + * X \----------------| |----/ + * polarity LEVEL mask + * + ****************************************************************************/ + +static int mvebu_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct irq_chip_type *ct = irq_data_get_chip_type(d); + struct mvebu_gpio_chip *mvchip = gc->private; + int pin; + u32 u; + + pin = d->hwirq; + + u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip)) & (1 << pin); + if (!u) { + return -EINVAL; + } + + type &= IRQ_TYPE_SENSE_MASK; + if (type == IRQ_TYPE_NONE) + return -EINVAL; + + /* Check if we need to change chip and handler */ + if (!(ct->type & type)) + if (irq_setup_alt_chip(d, type)) + return -EINVAL; + + /* + * Configure interrupt polarity. + */ + switch(type) { + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_LEVEL_HIGH: + u = readl_relaxed(mvebu_gpioreg_in_pol(mvchip)); + u &= ~(1 << pin); + writel_relaxed(u, mvebu_gpioreg_in_pol(mvchip)); + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: + u = readl_relaxed(mvebu_gpioreg_in_pol(mvchip)); + u |= 1 << pin; + writel_relaxed(u, mvebu_gpioreg_in_pol(mvchip)); + case IRQ_TYPE_EDGE_BOTH: { + u32 v; + + v = readl_relaxed(mvebu_gpioreg_in_pol(mvchip)) ^ + readl_relaxed(mvebu_gpioreg_data_in(mvchip)); + + /* + * set initial polarity based on current input level + */ + u = readl_relaxed(mvebu_gpioreg_in_pol(mvchip)); + if (v & (1 << pin)) + u |= 1 << pin; /* falling */ + else + u &= ~(1 << pin); /* rising */ + writel_relaxed(u, mvebu_gpioreg_in_pol(mvchip)); + } + } + return 0; +} + +static void mvebu_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + struct mvebu_gpio_chip *mvchip = irq_get_handler_data(irq); + u32 cause, type; + int i; + + if (mvchip == NULL) + return; + + cause = readl_relaxed(mvebu_gpioreg_data_in(mvchip)) & + readl_relaxed(mvebu_gpioreg_level_mask(mvchip)); + cause |= readl_relaxed(mvebu_gpioreg_edge_cause(mvchip)) & + readl_relaxed(mvebu_gpioreg_edge_mask(mvchip)); + + for (i = 0; i < mvchip->chip.ngpio; i++) { + int irq; + + irq = mvchip->irqbase + i; + + if (!(cause & (1 << i))) + continue; + + type = irqd_get_trigger_type(irq_get_irq_data(irq)); + if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { + /* Swap polarity (race with GPIO line) */ + u32 polarity; + + polarity = readl_relaxed(mvebu_gpioreg_in_pol(mvchip)); + polarity ^= 1 << i; + writel_relaxed(polarity, mvebu_gpioreg_in_pol(mvchip)); + } + generic_handle_irq(irq); + } +} + +static struct platform_device_id mvebu_gpio_ids[] = { + { + .name = "orion-gpio", + }, { + .name = "mv78200-gpio", + }, { + .name = "armadaxp-gpio", + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(platform, mvebu_gpio_ids); + +static struct of_device_id mvebu_gpio_of_match[] __devinitdata = { + { + .compatible = "marvell,orion-gpio", + .data = (void*) MVEBU_GPIO_SOC_VARIANT_ORION, + }, + { + .compatible = "marvell,mv78200-gpio", + .data = (void*) MVEBU_GPIO_SOC_VARIANT_MV78200, + }, + { + .compatible = "marvell,armadaxp-gpio", + .data = (void*) MVEBU_GPIO_SOC_VARIANT_ARMADAXP, + }, + { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, mvebu_gpio_of_match); + +static int __devinit mvebu_gpio_probe(struct platform_device *pdev) +{ + struct mvebu_gpio_chip *mvchip; + const struct of_device_id *match; + struct device_node *np = pdev->dev.of_node; + struct resource *res; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + unsigned int ngpios; + int soc_variant; + int i, cpu, id; + + match = of_match_device(mvebu_gpio_of_match, &pdev->dev); + if (match) + soc_variant = (int) match->data; + else + soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (! res) { + dev_err(&pdev->dev, "Cannot get memory resource\n"); + return -ENODEV; + } + + mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), GFP_KERNEL); + if (! mvchip){ + dev_err(&pdev->dev, "Cannot allocate memory\n"); + return -ENOMEM; + } + + if (of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpios)) { + dev_err(&pdev->dev, "Missing ngpios OF property\n"); + return -ENODEV; + } + + id = of_alias_get_id(pdev->dev.of_node, "gpio"); + if (id < 0) { + dev_err(&pdev->dev, "Couldn't get OF id\n"); + return id; + } + + mvchip->soc_variant = soc_variant; + mvchip->chip.label = dev_name(&pdev->dev); + mvchip->chip.dev = &pdev->dev; + mvchip->chip.request = mvebu_gpio_request; + mvchip->chip.direction_input = mvebu_gpio_direction_input; + mvchip->chip.get = mvebu_gpio_get; + mvchip->chip.direction_output = mvebu_gpio_direction_output; + mvchip->chip.set = mvebu_gpio_set; + mvchip->chip.to_irq = mvebu_gpio_to_irq; + mvchip->chip.base = id * MVEBU_MAX_GPIO_PER_BANK; + mvchip->chip.ngpio = ngpios; + mvchip->chip.can_sleep = 0; +#ifdef CONFIG_OF + mvchip->chip.of_node = np; +#endif + + spin_lock_init(&mvchip->lock); + mvchip->membase = devm_request_and_ioremap(&pdev->dev, res); + if (! mvchip->membase) { + dev_err(&pdev->dev, "Cannot ioremap\n"); + kfree(mvchip->chip.label); + return -ENOMEM; + } + + /* The Armada XP has a second range of registers for the + * per-CPU registers */ + if (soc_variant == MVEBU_GPIO_SOC_VARIANT_ARMADAXP) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (! res) { + dev_err(&pdev->dev, "Cannot get memory resource\n"); + kfree(mvchip->chip.label); + return -ENODEV; + } + + mvchip->percpu_membase = devm_request_and_ioremap(&pdev->dev, res); + if (! mvchip->percpu_membase) { + dev_err(&pdev->dev, "Cannot ioremap\n"); + kfree(mvchip->chip.label); + return -ENOMEM; + } + } + + /* + * Mask and clear GPIO interrupts. + */ + switch(soc_variant) { + case MVEBU_GPIO_SOC_VARIANT_ORION: + writel_relaxed(0, mvchip->membase + GPIO_EDGE_CAUSE_OFF); + writel_relaxed(0, mvchip->membase + GPIO_EDGE_MASK_OFF); + writel_relaxed(0, mvchip->membase + GPIO_LEVEL_MASK_OFF); + break; + case MVEBU_GPIO_SOC_VARIANT_MV78200: + writel_relaxed(0, mvchip->membase + GPIO_EDGE_CAUSE_OFF); + for (cpu = 0; cpu < 2; cpu++) { + writel_relaxed(0, mvchip->membase + + GPIO_EDGE_MASK_MV78200_OFF(cpu)); + writel_relaxed(0, mvchip->membase + + GPIO_LEVEL_MASK_MV78200_OFF(cpu)); + } + break; + case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: + writel_relaxed(0, mvchip->membase + GPIO_EDGE_CAUSE_OFF); + writel_relaxed(0, mvchip->membase + GPIO_EDGE_MASK_OFF); + writel_relaxed(0, mvchip->membase + GPIO_LEVEL_MASK_OFF); + for (cpu = 0; cpu < 4; cpu++) { + writel_relaxed(0, mvchip->percpu_membase + + GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu)); + writel_relaxed(0, mvchip->percpu_membase + + GPIO_EDGE_MASK_ARMADAXP_OFF(cpu)); + writel_relaxed(0, mvchip->percpu_membase + + GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu)); + } + break; + default: + BUG(); + } + + gpiochip_add(&mvchip->chip); + + /* Some gpio controllers do not provide irq support */ + if (!of_irq_count(np)) + return 0; + + /* Setup the interrupt handlers. Each chip can have up to 4 + * interrupt handlers, with each handler dealing with 8 GPIO + * pins. */ + for (i = 0; i < 4; i++) { + int irq; + irq = platform_get_irq(pdev, i); + if (irq < 0) + continue; + irq_set_handler_data(irq, mvchip); + irq_set_chained_handler(irq, mvebu_gpio_irq_handler); + } + + mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1); + if (mvchip->irqbase < 0) { + dev_err(&pdev->dev, "no irqs\n"); + kfree(mvchip->chip.label); + return -ENOMEM; + } + + gc = irq_alloc_generic_chip("mvebu_gpio_irq", 2, mvchip->irqbase, + mvchip->membase, handle_level_irq); + if (! gc) { + dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n"); + kfree(mvchip->chip.label); + return -ENOMEM; + } + + gc->private = mvchip; + ct = &gc->chip_types[0]; + ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; + ct->chip.irq_mask = mvebu_gpio_level_irq_mask; + ct->chip.irq_unmask = mvebu_gpio_level_irq_unmask; + ct->chip.irq_set_type = mvebu_gpio_irq_set_type; + ct->chip.name = mvchip->chip.label; + + ct = &gc->chip_types[1]; + ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + ct->chip.irq_ack = mvebu_gpio_irq_ack; + ct->chip.irq_mask = mvebu_gpio_edge_irq_mask; + ct->chip.irq_unmask = mvebu_gpio_edge_irq_unmask; + ct->chip.irq_set_type = mvebu_gpio_irq_set_type; + ct->handler = handle_edge_irq; + ct->chip.name = mvchip->chip.label; + + irq_setup_generic_chip(gc, IRQ_MSK(ngpios), IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); + + /* Setup irq domain on top of the generic chip. */ + mvchip->domain = irq_domain_add_legacy(np, mvchip->chip.ngpio, + mvchip->irqbase, 0, + &irq_domain_simple_ops, + mvchip); + if (!mvchip->domain) { + dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n", + mvchip->chip.label); + irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, + IRQ_LEVEL | IRQ_NOPROBE); + kfree(gc); + kfree(mvchip->chip.label); + return -ENODEV; + } + + return 0; +} + +static struct platform_driver mvebu_gpio_driver = { + .driver = { + .name = "mvebu-gpio", + .owner = THIS_MODULE, + .of_match_table = mvebu_gpio_of_match, + }, + .probe = mvebu_gpio_probe, + .id_table = mvebu_gpio_ids, +}; + +static int __init mvebu_gpio_init(void) +{ + return platform_driver_register(&mvebu_gpio_driver); +} +postcore_initcall(mvebu_gpio_init); -- cgit v0.10.2 From 3619ac02f1f37c29db8694397c4457853efc861d Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 19 Sep 2012 22:52:59 +0200 Subject: Documentation: add description of DT binding for the gpio-mvebu driver Signed-off-by: Thomas Petazzoni Acked-by: Linus Walleij Cc: Grant Likely Cc: Linus Walleij Cc: Andrew Lunn Cc: Jason Cooper Cc: Gregory Clement Acked-by: Rob Herring Acked-by: Arnd Bergmann Signed-off-by: Jason Cooper diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt new file mode 100644 index 0000000..a6f3bec --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt @@ -0,0 +1,53 @@ +* Marvell EBU GPIO controller + +Required properties: + +- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio" + or "marvell,armadaxp-gpio". "marvell,orion-gpio" should be used for + Orion, Kirkwood, Dove, Discovery (except MV78200) and Armada + 370. "marvell,mv78200-gpio" should be used for the Discovery + MV78200. "marvel,armadaxp-gpio" should be used for all Armada XP + SoCs (MV78230, MV78260, MV78460). + +- reg: Address and length of the register set for the device. Only one + entry is expected, except for the "marvell,armadaxp-gpio" variant + for which two entries are expected: one for the general registers, + one for the per-cpu registers. + +- interrupts: The list of interrupts that are used for all the pins + managed by this GPIO bank. There can be more than one interrupt + (example: 1 interrupt per 8 pins on Armada XP, which means 4 + interrupts per bank of 32 GPIOs). + +- interrupt-controller: identifies the node as an interrupt controller + +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. Should be two. + The first cell is the GPIO number. + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + +- gpio-controller: marks the device node as a gpio controller + +- ngpios: number of GPIOs this controller has + +- #gpio-cells: Should be two. The first cell is the pin number. The + second cell is reserved for flags, unused at the moment. + +Example: + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; -- cgit v0.10.2 From 93a59cf3d345d84e2edf43ec37301d09c5003934 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 19 Sep 2012 22:53:00 +0200 Subject: arm: mvebu: use GPIO support now that a driver is available Signed-off-by: Thomas Petazzoni Cc: Andrew Lunn Cc: Jason Cooper Cc: Gregory Clement Acked-by: Arnd Bergmann Signed-off-by: Jason Cooper diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4b30724..6eaf947 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -569,6 +569,7 @@ config ARCH_MVEBU select COMMON_CLK select PLAT_ORION select PINCTRL + select ARCH_WANT_OPTIONAL_GPIOLIB help Support for the Marvell SoC Family with device tree support diff --git a/arch/arm/mach-mvebu/include/mach/gpio.h b/arch/arm/mach-mvebu/include/mach/gpio.h new file mode 100644 index 0000000..40a8c17 --- /dev/null +++ b/arch/arm/mach-mvebu/include/mach/gpio.h @@ -0,0 +1 @@ +/* empty */ -- cgit v0.10.2 From 397d59f3b59e32236a0b74803d636c061d537aef Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 19 Sep 2012 22:53:01 +0200 Subject: arm: mvebu: add DT information for GPIO banks on Armada 370 and XP The gpioX aliases are needed so that the driver can use of_alias_get_id() to get a 0-based number of the GPIO bank, which we then use to compute the base GPIO of the bank being probed. This is similar to what gpio-mxs.c is doing. Signed-off-by: Thomas Petazzoni Cc: Jason Cooper Cc: Andrew Lunn Cc: Gregory Clement Acked-by: Arnd Bergmann Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 2bfb904..2069151 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -21,6 +21,12 @@ model = "Marvell Armada 370 family SoC"; compatible = "marvell,armada370", "marvell,armada-370-xp"; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + mpic: interrupt-controller@d0020000 { reg = <0xd0020a00 0x1d0>, <0xd0021870 0x58>; @@ -35,6 +41,39 @@ pinctrl { compatible = "marvell,mv88f6710-pinctrl"; reg = <0xd0018000 0x38>; + }; + + gpio0: gpio@d0018100 { + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; + + gpio2: gpio@d0018180 { + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; + ngpios = <2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <91>; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 38ede3d..ea35519 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -19,10 +19,39 @@ model = "Marvell Armada XP MV78230 SoC"; compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + }; + soc { pinctrl { compatible = "marvell,mv78230-pinctrl"; reg = <0xd0018000 0x38>; }; + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; + ngpios = <17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <20>, <21>, <22>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index b2eafcd..2057863 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -19,10 +19,52 @@ model = "Marvell Armada XP MV78260 SoC"; compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + soc { pinctrl { compatible = "marvell,mv78260-pinctrl"; reg = <0xd0018000 0x38>; }; + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <20>, <21>, <22>, <23>; + }; + + gpio2: gpio@d0018180 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018180 0x40>, + <0xd0018870 0x30>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <24>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index cf8624d..ffac983 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -19,10 +19,52 @@ model = "Marvell Armada XP MV78460 SoC"; compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + soc { pinctrl { compatible = "marvell,mv78460-pinctrl"; reg = <0xd0018000 0x38>; }; + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <20>, <21>, <22>, <23>; + }; + + gpio2: gpio@d0018180 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018180 0x40>, + <0xd0018870 0x30>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <24>; + }; }; }; -- cgit v0.10.2 From 3415b08fc69af283cb19883c32fc4c62c84c55d7 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 19 Sep 2012 22:53:02 +0200 Subject: arm: mvebu: add gpio support in defconfig Signed-off-by: Thomas Petazzoni Cc: Jason Cooper Cc: Andrew Lunn Cc: Gregory Clement Acked-by: Arnd Bergmann Signed-off-by: Jason Cooper diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 2e86b31..7bcf850 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -21,6 +21,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -- cgit v0.10.2 From 54672d3241be93e48535ecc64b70ea4cf66723bc Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Mon, 10 Sep 2012 15:35:53 +0100 Subject: ARM: kirkwood: Trim excess #includes in board-dnskw.c Lots of code has now moved into the devicetree, leaving a collection of useless header files. Tidy them up. This applies cleanly atop of my previous patch, "[PATCH V2 2/2] ARM: kirkwood: Use devicetree to define DNS-32[05] fan", which also removes gpio-fan.h Signed-off-by: Jamie Lentin Acked-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 6ac7a8d..43d16d6 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -14,17 +14,8 @@ #include #include #include -#include #include -#include #include -#include -#include -#include -#include -#include -#include -#include #include "common.h" #include "mpp.h" -- cgit v0.10.2 From e5e7045364d5cc415fa1d150f033f38fedb6b7cb Mon Sep 17 00:00:00 2001 From: Michael Jones Date: Sat, 22 Sep 2012 02:24:13 -0600 Subject: ARM: OMAP3: clock data: remove obsolete comment The file is currently called 'clock3xxx_data.c', so this comment is out of date. Signed-off-by: Michael Jones [paul@pwsan.com: wrote changelog] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 700317a..54f439b 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3215,7 +3215,6 @@ static struct clk dummy_apb_pclk = { * clkdev */ -/* XXX At some point we should rename this file to clock3xxx_data.c */ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "apb_pclk", &dummy_apb_pclk, CK_3XXX), CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_3XXX), -- cgit v0.10.2 From f84c3782900866fb549cc3746eaf40574fda564f Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Sat, 22 Sep 2012 02:24:14 -0600 Subject: ARM: OMAP2420: Cosmetic fix for timer clock aliases In commit c59b537 (ARM: OMAP2+: Simplify dmtimer clock aliases) new clock aliases were added for OMAP2+ devices. For OMAP2420, I incorrectly set the clock flag as CK_243X instead of CK_242X. This did not introduce a regression as the clock flags are not checked for OMAP2 devices. This also explains why I did not catch this when testing on OMAP2420. Fix the clock flags for these aliases for correctness. Signed-off-by: Jon Hunter diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 12c178d..51098a4 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1897,9 +1897,9 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_242X), CLK("musb-hdrc", "fck", &osc_ck, CK_242X), - CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X), - CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X), - CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X), + CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_242X), + CLK(NULL, "timer_sys_ck", &sys_ck, CK_242X), + CLK(NULL, "timer_ext_ck", &alt_ck, CK_242X), }; /* -- cgit v0.10.2 From 8fde3afbfae8e8469d8a484115715353b62e83e8 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sat, 22 Sep 2012 02:24:14 -0600 Subject: ARM: OMAP3: clock data: Add the USB TLL clocks device name The platform device name "usbhs_tll" is added for the functional, interface and channel clocks of the TLL module. Signed-off-by: Keshava Munegowda Reviewed-by: Partha Basak Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 54f439b..fc7dded 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3294,6 +3294,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs_tll", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX), @@ -3328,6 +3329,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX), CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("usbhs_omap", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs_tll", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX), CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX), @@ -3384,6 +3386,8 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_tll", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_tll", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), CLK(NULL, "init_60m_fclk", &dummy_ck, CK_3XXX), CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX), CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 500682c..77ff033 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3262,6 +3262,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X), CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick, CK_443X), + CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick, CK_443X), CLK(NULL, "usim_ck", &usim_ck, CK_443X), CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), CLK(NULL, "usim_fck", &usim_fck, CK_443X), @@ -3312,6 +3313,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "uart4_ick", &dummy_ck, CK_443X), CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X), CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X), + CLK("usbhs_tll", "usbtll_fck", &dummy_ck, CK_443X), CLK("omap_wdt", "ick", &dummy_ck, CK_443X), CLK(NULL, "timer_32k_ck", &sys_32k_ck, CK_443X), CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck, CK_443X), -- cgit v0.10.2 From c810fde217fcaf225e7693887a1ef955a1c86097 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sat, 22 Sep 2012 02:24:14 -0600 Subject: ARM: OMAP2+: clock data: add some aliases for use by CPUFreq only These clkdev aliases should make it possible to remove the cpu_is_omap*() calls and the omap_device*() call from drivers/cpufreq/omap-cpufreq.c during the next merge window. Those are interfering with multi-subarch ARM kernels. Signed-off-by: Paul Walmsley Cc: Kevin Hilman Cc: Rafael J. Wysocki Acked-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 51098a4..8c3bd2a 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1900,6 +1900,7 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_242X), CLK(NULL, "timer_sys_ck", &sys_ck, CK_242X), CLK(NULL, "timer_ext_ck", &alt_ck, CK_242X), + CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_242X), }; /* diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 7ea9139..0c8503d 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1994,6 +1994,7 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X), CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X), CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X), + CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_243X), }; /* diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index fc7dded..f1ee4ec 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3470,6 +3470,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX), CLK(NULL, "timer_32k_ck", &omap_32k_fck, CK_3XXX), CLK(NULL, "timer_sys_ck", &sys_ck, CK_3XXX), + CLK(NULL, "cpufreq_ck", &dpll1_ck, CK_3XXX), }; diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 77ff033..a8454ba 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3327,6 +3327,7 @@ static struct omap_clk omap44xx_clks[] = { CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck, CK_443X), CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck, CK_443X), CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X), }; int __init omap4xxx_clk_init(void) -- cgit v0.10.2 From 4236bd0d7cdfe6a96619978a3b7788a68498a4a9 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Sat, 22 Sep 2012 02:24:15 -0600 Subject: ARM: OMAP2+: AM33XX: clock data: Add clkdev alias for cpu0 Add AM335x cpu0 clock entry to the corresponding clock data file. This is useful in getting the correct mpu clock pointer to change the cpu frequency in cpufreq driver. Signed-off-by: AnilKumar Ch [paul@pwsan.com: changed patch subject] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 2026311..b87b88c 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1013,6 +1013,7 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_AM33XX), CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_AM33XX), CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_AM33XX), + CLK("cpu0", NULL, &dpll_mpu_ck, CK_AM33XX), CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_AM33XX), CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck, CK_AM33XX), CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck, CK_AM33XX), -- cgit v0.10.2 From fabcf41f3c1b29b4a4fccd321a18acfc05dc0aae Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Sat, 22 Sep 2012 02:24:15 -0600 Subject: ARM: OMAP4: Add timer clock aliases for device-tree For OMAP4, the dmtimers are located in the Wake-up, ABE and Peripheral (PER) power domains. Hence, when the dmtimer is configured to use the "timer_sys_ck" as its functional clock the actual clock used is different depending on whether the clock is in the Wake-up, ABE or PER domain. So when we look-up the dmtimer's "timer_sys_ck" we need to specify the timer device name as well as clock alias to find the right clock. Currently, the device names for the timers have the format "omap_timer.X" where X is the timer instance number. When using to device tree, the format of the device name created by device-tree is different and has the format "." (this is assuming that the device-tree "reg" property is specified). This causes the look-up for the OMAP4 "timer_sys_ck" to fail. To fix this add new timer clock alias for using device-tree. Please note that adding a 2nd set of clock aliases for the same clocks to only temporary until device-tree migration is complete. Then we can remove the legacy aliases. Hence, I have marked the legacy aliases with a "TODO" to remove them. Signed-off-by: Jon Hunter [paul@pwsan.com: updated to apply] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index a8454ba..506506f 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3316,6 +3316,7 @@ static struct omap_clk omap44xx_clks[] = { CLK("usbhs_tll", "usbtll_fck", &dummy_ck, CK_443X), CLK("omap_wdt", "ick", &dummy_ck, CK_443X), CLK(NULL, "timer_32k_ck", &sys_32k_ck, CK_443X), + /* TODO: Remove "omap_timer.X" aliases once DT migration is complete */ CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck, CK_443X), CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck, CK_443X), CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck, CK_443X), @@ -3327,6 +3328,17 @@ static struct omap_clk omap44xx_clks[] = { CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck, CK_443X), CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck, CK_443X), CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("4a318000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("48032000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("48034000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("48036000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), + CLK("49038000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("4903a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("4903c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("4903e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X), }; -- cgit v0.10.2 From a04bcc231c1bcfe7602bcb3e8d742ef796142275 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sat, 22 Sep 2012 02:24:16 -0600 Subject: SPI: OMAP: remove unnecessary includes of plat/clock.h Remove unnecessary includes of plat/clock.h from the OMAP SPI controller drivers. These need to be removed to build multi-subarch ARM kernels which include these drivers. Signed-off-by: Paul Walmsley Cc: Grant Likely Acked-by: Grant Likely diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c index 9bd1c92..dfb4b7f 100644 --- a/drivers/spi/spi-omap-100k.c +++ b/drivers/spi/spi-omap-100k.c @@ -37,8 +37,6 @@ #include -#include - #define OMAP1_SPI100K_MAX_FREQ 48000000 #define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12) diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index b2fb141..b5d6994 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -41,7 +41,6 @@ #include -#include #include #define OMAP2_MCSPI_MAX_FREQ 48000000 -- cgit v0.10.2 From 4d7cb45ee823541632a3d50f57031ce9fd60e13f Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Sat, 22 Sep 2012 02:24:16 -0600 Subject: ARM: omap: clk: add clk_prepare and clk_unprepare As part of Common Clk Framework (CCF) the clk_enable() operation was split into a clk_prepare() which could sleep, and a clk_enable() which should never sleep. Similarly the clk_disable() was split into clk_disable() and clk_unprepare(). This was needed to handle complex cases where in a clk gate/ungate would require a slow and a fast part to be implemented. None of the clocks below seem to be in the 'complex' clocks category and are just simple clocks which are enabled/disabled through simple register writes. Most of the instances also seem to be called in non-atomic context which means its safe to move all of those from using a clk_enable() to clk_prepare_enable() and clk_disable() to clk_disable_unprepare(). For some others, mainly the ones handled through the hwmod framework there is a possibility that they get called in either an atomic or a non-atomic context. The way these get handled below work only as long as clk_prepare is implemented as a no-op (which is the case today) since this gets called very early at boot while most subsystems are unavailable. Hence these are marked with a *HACK* comment, which says we need to re-visit these once we start doing something meaningful with clk_prepare/clk_unprepare like doing voltage scaling or something that involves i2c. This is in preparation of OMAP moving to CCF. Based on initial changes from Mike Turquette. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 3e2d76f..cea3aba 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -202,7 +202,7 @@ static inline void __init apollon_init_smc91x(void) return; } - clk_enable(gpmc_fck); + clk_prepare_enable(gpmc_fck); rate = clk_get_rate(gpmc_fck); eth_cs = APOLLON_ETH_CS; @@ -246,7 +246,7 @@ static inline void __init apollon_init_smc91x(void) gpmc_cs_free(APOLLON_ETH_CS); } out: - clk_disable(gpmc_fck); + clk_disable_unprepare(gpmc_fck); clk_put(gpmc_fck); } diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 12569cb..313b3f4 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -265,9 +265,9 @@ static inline void __init h4_init_debug(void) return; } - clk_enable(gpmc_fck); + clk_prepare_enable(gpmc_fck); rate = clk_get_rate(gpmc_fck); - clk_disable(gpmc_fck); + clk_disable_unprepare(gpmc_fck); clk_put(gpmc_fck); if (is_gpmc_muxed()) @@ -311,7 +311,7 @@ static inline void __init h4_init_debug(void) gpmc_cs_free(eth_cs); out: - clk_disable(gpmc_fck); + clk_disable_unprepare(gpmc_fck); clk_put(gpmc_fck); } diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 45fe2d3..8ae2c59 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -171,7 +171,7 @@ static void __init omap4_ehci_init(void) return; } clk_set_rate(phy_ref_clk, 19200000); - clk_enable(phy_ref_clk); + clk_prepare_enable(phy_ref_clk); /* disable the power to the usb hub prior to init and reset phy+hub */ ret = gpio_request_array(panda_ehci_gpios, diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index fc2765b..319ff52 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -64,15 +64,15 @@ void __init omap3_clk_lock_dpll5(void) dpll5_clk = clk_get(NULL, "dpll5_ck"); clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST); - clk_enable(dpll5_clk); + clk_prepare_enable(dpll5_clk); /* Program dpll5_m2_clk divider for no division */ dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck"); - clk_enable(dpll5_m2_clk); + clk_prepare_enable(dpll5_m2_clk); clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST); - clk_disable(dpll5_m2_clk); - clk_disable(dpll5_clk); + clk_disable_unprepare(dpll5_m2_clk); + clk_disable_unprepare(dpll5_clk); return; } diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index af1ed7d..5a3afd2 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -488,7 +488,7 @@ int omap_dss_reset(struct omap_hwmod *oh) for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) if (oc->_clk) - clk_enable(oc->_clk); + clk_prepare_enable(oc->_clk); dispc_disable_outputs(); @@ -515,7 +515,7 @@ int omap_dss_reset(struct omap_hwmod *oh) for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) if (oc->_clk) - clk_disable(oc->_clk); + clk_disable_unprepare(oc->_clk); r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 055ae8b..5de0f7b 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -879,7 +879,7 @@ static int __init gpmc_init(void) BUG(); } - clk_enable(gpmc_l3_clk); + clk_prepare_enable(gpmc_l3_clk); l = gpmc_read_reg(GPMC_REVISION); printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6504f0e..99fd3bb 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -685,6 +685,15 @@ static int _init_main_clk(struct omap_hwmod *oh) oh->name, oh->main_clk); return -EINVAL; } + /* + * HACK: This needs a re-visit once clk_prepare() is implemented + * to do something meaningful. Today its just a no-op. + * If clk_prepare() is used at some point to do things like + * voltage scaling etc, then this would have to be moved to + * some point where subsystems like i2c and pmic become + * available. + */ + clk_prepare(oh->_clk); if (!oh->_clk->clkdm) pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n", @@ -722,6 +731,15 @@ static int _init_interface_clks(struct omap_hwmod *oh) ret = -EINVAL; } os->_clk = c; + /* + * HACK: This needs a re-visit once clk_prepare() is implemented + * to do something meaningful. Today its just a no-op. + * If clk_prepare() is used at some point to do things like + * voltage scaling etc, then this would have to be moved to + * some point where subsystems like i2c and pmic become + * available. + */ + clk_prepare(os->_clk); } return ret; @@ -749,6 +767,15 @@ static int _init_opt_clks(struct omap_hwmod *oh) ret = -EINVAL; } oc->_clk = c; + /* + * HACK: This needs a re-visit once clk_prepare() is implemented + * to do something meaningful. Today its just a no-op. + * If clk_prepare() is used at some point to do things like + * voltage scaling etc, then this would have to be moved to + * some point where subsystems like i2c and pmic become + * available. + */ + clk_prepare(oc->_clk); } return ret; -- cgit v0.10.2 From 6ea74cb9853e923f8945586cd9ccdd42e6f00ba9 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Sat, 22 Sep 2012 02:24:16 -0600 Subject: ARM: OMAP2+: hwmod: get rid of all omap_clk_get_by_name usage Moving to Common clk framework for OMAP would mean we no longer use internal lookup mechanism like omap_clk_get_by_name(). get rid of all its usage mostly from hwmod and omap_device code. Moving to clk_get() also means the respective platforms need the clkdev tables updated with an entry for all clocks used by hwmod to have clock name same as the alias. Based on original changes from Mike Turquette. Signed-off-by: Rajendra Nayak Cc: Russell King - ARM Linux [paul@pwsan.com: removed IS_ERR_OR_NULL() conversion (rmk comment); restricted omap_96m_alwon_fck_3630 to OMAP36xx; added missing AM35xx clock aliases for emac_fck, emac_ick, vpfe_ick, vpfe_fck; added aliases rng_ick and several emulation clocks] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 8c3bd2a..c3cde1a 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1804,6 +1804,7 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "gfx_ick", &gfx_ick, CK_242X), /* DSS domain clocks */ CLK("omapdss_dss", "ick", &dss_ick, CK_242X), + CLK(NULL, "dss_ick", &dss_ick, CK_242X), CLK(NULL, "dss1_fck", &dss1_fck, CK_242X), CLK(NULL, "dss2_fck", &dss2_fck, CK_242X), CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_242X), @@ -1843,12 +1844,16 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "gpt12_ick", &gpt12_ick, CK_242X), CLK(NULL, "gpt12_fck", &gpt12_fck, CK_242X), CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_242X), + CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_242X), CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_242X), CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_242X), + CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_242X), CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_242X), CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_242X), + CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_242X), CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_242X), CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_242X), + CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_242X), CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_242X), CLK(NULL, "uart1_ick", &uart1_ick, CK_242X), CLK(NULL, "uart1_fck", &uart1_fck, CK_242X), @@ -1859,12 +1864,15 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "gpios_ick", &gpios_ick, CK_242X), CLK(NULL, "gpios_fck", &gpios_fck, CK_242X), CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_242X), + CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_242X), CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_242X), CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_242X), CLK(NULL, "wdt1_ick", &wdt1_ick, CK_242X), CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_242X), CLK("omap24xxcam", "fck", &cam_fck, CK_242X), + CLK(NULL, "cam_fck", &cam_fck, CK_242X), CLK("omap24xxcam", "ick", &cam_ick, CK_242X), + CLK(NULL, "cam_ick", &cam_ick, CK_242X), CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_242X), CLK(NULL, "wdt4_ick", &wdt4_ick, CK_242X), CLK(NULL, "wdt4_fck", &wdt4_fck, CK_242X), @@ -1873,16 +1881,22 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "mspro_ick", &mspro_ick, CK_242X), CLK(NULL, "mspro_fck", &mspro_fck, CK_242X), CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), + CLK(NULL, "mmc_ick", &mmc_ick, CK_242X), CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), + CLK(NULL, "mmc_fck", &mmc_fck, CK_242X), CLK(NULL, "fac_ick", &fac_ick, CK_242X), CLK(NULL, "fac_fck", &fac_fck, CK_242X), CLK(NULL, "eac_ick", &eac_ick, CK_242X), CLK(NULL, "eac_fck", &eac_fck, CK_242X), CLK("omap_hdq.0", "ick", &hdq_ick, CK_242X), + CLK(NULL, "hdq_ick", &hdq_ick, CK_242X), CLK("omap_hdq.0", "fck", &hdq_fck, CK_242X), + CLK(NULL, "hdq_fck", &hdq_fck, CK_242X), CLK("omap_i2c.1", "ick", &i2c1_ick, CK_242X), + CLK(NULL, "i2c1_ick", &i2c1_ick, CK_242X), CLK(NULL, "i2c1_fck", &i2c1_fck, CK_242X), CLK("omap_i2c.2", "ick", &i2c2_ick, CK_242X), + CLK(NULL, "i2c2_ick", &i2c2_ick, CK_242X), CLK(NULL, "i2c2_fck", &i2c2_fck, CK_242X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_242X), CLK(NULL, "sdma_fck", &sdma_fck, CK_242X), @@ -1892,8 +1906,11 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), CLK(NULL, "des_ick", &des_ick, CK_242X), CLK("omap-sham", "ick", &sha_ick, CK_242X), + CLK(NULL, "sha_ick", &sha_ick, CK_242X), CLK("omap_rng", "ick", &rng_ick, CK_242X), + CLK(NULL, "rng_ick", &rng_ick, CK_242X), CLK("omap-aes", "ick", &aes_ick, CK_242X), + CLK(NULL, "aes_ick", &aes_ick, CK_242X), CLK(NULL, "pka_ick", &pka_ick, CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_242X), CLK("musb-hdrc", "fck", &osc_ck, CK_242X), diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 0c8503d..22404fe 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1888,6 +1888,7 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), /* DSS domain clocks */ CLK("omapdss_dss", "ick", &dss_ick, CK_243X), + CLK(NULL, "dss_ick", &dss_ick, CK_243X), CLK(NULL, "dss1_fck", &dss1_fck, CK_243X), CLK(NULL, "dss2_fck", &dss2_fck, CK_243X), CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X), @@ -1927,20 +1928,28 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X), CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X), CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X), + CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_243X), CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_243X), CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X), + CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_243X), CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_243X), CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), + CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_243X), CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_243X), CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), + CLK(NULL, "mcbsp4_ick", &mcbsp4_ick, CK_243X), CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_243X), CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), + CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_243X), CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_243X), CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X), + CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_243X), CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_243X), CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X), + CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_243X), CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_243X), CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), + CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_243X), CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_243X), CLK(NULL, "uart1_ick", &uart1_ick, CK_243X), CLK(NULL, "uart1_fck", &uart1_fck, CK_243X), @@ -1951,13 +1960,16 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "gpios_ick", &gpios_ick, CK_243X), CLK(NULL, "gpios_fck", &gpios_fck, CK_243X), CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X), + CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_243X), CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_243X), CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X), CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X), CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X), CLK(NULL, "icr_ick", &icr_ick, CK_243X), CLK("omap24xxcam", "fck", &cam_fck, CK_243X), + CLK(NULL, "cam_fck", &cam_fck, CK_243X), CLK("omap24xxcam", "ick", &cam_ick, CK_243X), + CLK(NULL, "cam_ick", &cam_ick, CK_243X), CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X), CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X), CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X), @@ -1966,10 +1978,14 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "fac_ick", &fac_ick, CK_243X), CLK(NULL, "fac_fck", &fac_fck, CK_243X), CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X), + CLK(NULL, "hdq_ick", &hdq_ick, CK_243X), CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X), + CLK(NULL, "hdq_fck", &hdq_fck, CK_243X), CLK("omap_i2c.1", "ick", &i2c1_ick, CK_243X), + CLK(NULL, "i2c1_ick", &i2c1_ick, CK_243X), CLK(NULL, "i2chs1_fck", &i2chs1_fck, CK_243X), CLK("omap_i2c.2", "ick", &i2c2_ick, CK_243X), + CLK(NULL, "i2c2_ick", &i2c2_ick, CK_243X), CLK(NULL, "i2chs2_fck", &i2chs2_fck, CK_243X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X), CLK(NULL, "sdma_fck", &sdma_fck, CK_243X), @@ -1978,19 +1994,25 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "des_ick", &des_ick, CK_243X), CLK("omap-sham", "ick", &sha_ick, CK_243X), CLK("omap_rng", "ick", &rng_ick, CK_243X), + CLK(NULL, "rng_ick", &rng_ick, CK_243X), CLK("omap-aes", "ick", &aes_ick, CK_243X), CLK(NULL, "pka_ick", &pka_ick, CK_243X), CLK(NULL, "usb_fck", &usb_fck, CK_243X), CLK("musb-omap2430", "ick", &usbhs_ick, CK_243X), + CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X), CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_243X), + CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_243X), CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_243X), CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_243X), + CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_243X), CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_243X), CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), + CLK(NULL, "mmchsdb1_fck", &mmchsdb1_fck, CK_243X), CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), + CLK(NULL, "mmchsdb2_fck", &mmchsdb2_fck, CK_243X), CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X), CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X), CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index f1ee4ec..1f42c9d 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3242,11 +3242,13 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_3XXX), CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_3XXX), CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_3XXX), + CLK(NULL, "emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX), CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX), CLK(NULL, "dpll4_ck", &dpll4_ck, CK_3XXX), CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_3XXX), CLK(NULL, "omap_192m_alwon_fck", &omap_192m_alwon_fck, CK_36XX), CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_3XXX), + CLK(NULL, "omap_96m_alwon_fck_3630", &omap_96m_alwon_fck_3630, CK_36XX), CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_3XXX), CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_3XXX), CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_3XXX), @@ -3262,6 +3264,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_3XXX), CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_3XXX), CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX), + CLK(NULL, "emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX), CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX), CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), @@ -3271,6 +3274,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "dpll1_fck", &dpll1_fck, CK_3XXX), CLK(NULL, "mpu_ck", &mpu_ck, CK_3XXX), CLK(NULL, "arm_fck", &arm_fck, CK_3XXX), + CLK(NULL, "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX), CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX), CLK(NULL, "dpll2_fck", &dpll2_fck, CK_34XX | CK_36XX), CLK(NULL, "iva2_ck", &iva2_ck, CK_34XX | CK_36XX), @@ -3315,6 +3319,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), CLK(NULL, "core_12m_fck", &core_12m_fck, CK_3XXX), CLK("omap_hdq.0", "fck", &hdq_fck, CK_3XXX), + CLK(NULL, "hdq_fck", &hdq_fck, CK_3XXX), CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2PLUS | CK_36XX), CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), @@ -3322,6 +3327,8 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "core_l3_ick", &core_l3_ick, CK_3XXX), CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es1, CK_3430ES1), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX), CLK(NULL, "sdrc_ick", &sdrc_ick, CK_3XXX), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_3XXX), CLK(NULL, "security_l3_ick", &security_l3_ick, CK_34XX | CK_36XX), @@ -3331,27 +3338,40 @@ static struct omap_clk omap3xxx_clks[] = { CLK("usbhs_omap", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("usbhs_tll", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK(NULL, "mmchs3_ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX), CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX), CLK("omap-sham", "ick", &sha12_ick, CK_34XX | CK_36XX), CLK(NULL, "des2_ick", &des2_ick, CK_34XX | CK_36XX), CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_3XXX), CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_3XXX), + CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_3XXX), + CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_3XXX), CLK(NULL, "mspro_ick", &mspro_ick, CK_34XX | CK_36XX), CLK("omap_hdq.0", "ick", &hdq_ick, CK_3XXX), + CLK(NULL, "hdq_ick", &hdq_ick, CK_3XXX), CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_3XXX), CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_3XXX), CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_3XXX), CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_3XXX), + CLK(NULL, "mcspi4_ick", &mcspi4_ick, CK_3XXX), + CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_3XXX), + CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_3XXX), + CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_3XXX), CLK("omap_i2c.3", "ick", &i2c3_ick, CK_3XXX), CLK("omap_i2c.2", "ick", &i2c2_ick, CK_3XXX), CLK("omap_i2c.1", "ick", &i2c1_ick, CK_3XXX), + CLK(NULL, "i2c3_ick", &i2c3_ick, CK_3XXX), + CLK(NULL, "i2c2_ick", &i2c2_ick, CK_3XXX), + CLK(NULL, "i2c1_ick", &i2c1_ick, CK_3XXX), CLK(NULL, "uart2_ick", &uart2_ick, CK_3XXX), CLK(NULL, "uart1_ick", &uart1_ick, CK_3XXX), CLK(NULL, "gpt11_ick", &gpt11_ick, CK_3XXX), CLK(NULL, "gpt10_ick", &gpt10_ick, CK_3XXX), CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_3XXX), CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_3XXX), + CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_3XXX), + CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_3XXX), CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1), CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_34XX | CK_36XX), CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_3XXX), @@ -3370,7 +3390,9 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_3XXX), CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_3XXX), CLK("omapdss_dss", "ick", &dss_ick_3430es1, CK_3430ES1), + CLK(NULL, "dss_ick", &dss_ick_3430es1, CK_3430ES1), CLK("omapdss_dss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK(NULL, "dss_ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "cam_mclk", &cam_mclk, CK_34XX | CK_36XX), CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX), @@ -3397,6 +3419,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_34XX | CK_36XX), CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2PLUS | CK_36XX), CLK("omap_wdt", "ick", &wdt2_ick, CK_3XXX), + CLK(NULL, "wdt2_ick", &wdt2_ick, CK_3XXX), CLK(NULL, "wdt1_ick", &wdt1_ick, CK_3XXX), CLK(NULL, "gpio1_ick", &gpio1_ick, CK_3XXX), CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX), @@ -3442,9 +3465,13 @@ static struct omap_clk omap3xxx_clks[] = { CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_3XXX), CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_3XXX), CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_3XXX), + CLK(NULL, "mcbsp4_ick", &mcbsp2_ick, CK_3XXX), + CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_3XXX), + CLK(NULL, "mcbsp2_ick", &mcbsp4_ick, CK_3XXX), CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_3XXX), CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_3XXX), CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_3XXX), + CLK(NULL, "emu_src_ck", &emu_src_ck, CK_3XXX), CLK("etb", "emu_src_ck", &emu_src_ck, CK_3XXX), CLK(NULL, "pclk_fck", &pclk_fck, CK_3XXX), CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_3XXX), @@ -3460,8 +3487,12 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), + CLK(NULL, "emac_ick", &emac_ick, CK_AM35XX), + CLK(NULL, "emac_fck", &emac_fck, CK_AM35XX), CLK("davinci_emac.0", NULL, &emac_ick, CK_AM35XX), CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX), + CLK(NULL, "vpfe_ick", &emac_ick, CK_AM35XX), + CLK(NULL, "vpfe_fck", &emac_fck, CK_AM35XX), CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx, CK_AM35XX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 506506f..d661d13 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3156,6 +3156,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X), CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X), CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X), + CLK(NULL, "dss_fck", &dss_fck, CK_443X), CLK("omapdss_dss", "ick", &dss_fck, CK_443X), CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X), CLK(NULL, "emif1_fck", &emif1_fck, CK_443X), @@ -3212,6 +3213,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X), CLK(NULL, "ocp2scp_usb_phy_ick", &ocp2scp_usb_phy_ick, CK_443X), CLK(NULL, "ocp_wp_noc_ick", &ocp_wp_noc_ick, CK_443X), + CLK(NULL, "rng_ick", &rng_ick, CK_443X), CLK("omap_rng", "ick", &rng_ick, CK_443X), CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X), CLK(NULL, "sl2if_ick", &sl2if_ick, CK_443X), @@ -3243,6 +3245,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "uart3_fck", &uart3_fck, CK_443X), CLK(NULL, "uart4_fck", &uart4_fck, CK_443X), CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck, CK_443X), + CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X), CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X), CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X), CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X), @@ -3253,14 +3256,17 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk, CK_443X), CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X), CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X), + CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck, CK_443X), CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck, CK_443X), CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X), CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X), + CLK(NULL, "usb_otg_hs_ick", &usb_otg_hs_ick, CK_443X), CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X), CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X), + CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick, CK_443X), CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick, CK_443X), CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick, CK_443X), CLK(NULL, "usim_ck", &usim_ck, CK_443X), diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 99fd3bb..428dca6 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -679,8 +679,8 @@ static int _init_main_clk(struct omap_hwmod *oh) if (!oh->main_clk) return 0; - oh->_clk = omap_clk_get_by_name(oh->main_clk); - if (!oh->_clk) { + oh->_clk = clk_get(NULL, oh->main_clk); + if (IS_ERR(oh->_clk)) { pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n", oh->name, oh->main_clk); return -EINVAL; @@ -724,8 +724,8 @@ static int _init_interface_clks(struct omap_hwmod *oh) if (!os->clk) continue; - c = omap_clk_get_by_name(os->clk); - if (!c) { + c = clk_get(NULL, os->clk); + if (IS_ERR(c)) { pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n", oh->name, os->clk); ret = -EINVAL; @@ -760,8 +760,8 @@ static int _init_opt_clks(struct omap_hwmod *oh) int ret = 0; for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) { - c = omap_clk_get_by_name(oc->clk); - if (!c) { + c = clk_get(NULL, oc->clk); + if (IS_ERR(c)) { pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n", oh->name, oc->clk); ret = -EINVAL; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 706b7e2..9d7ac20 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -312,33 +312,6 @@ void clk_enable_init_clocks(void) } } -/** - * omap_clk_get_by_name - locate OMAP struct clk by its name - * @name: name of the struct clk to locate - * - * Locate an OMAP struct clk by its name. Assumes that struct clk - * names are unique. Returns NULL if not found or a pointer to the - * struct clk if found. - */ -struct clk *omap_clk_get_by_name(const char *name) -{ - struct clk *c; - struct clk *ret = NULL; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(c, &clocks, node) { - if (!strcmp(c->name, name)) { - ret = c; - break; - } - } - - mutex_unlock(&clocks_mutex); - - return ret; -} - int omap_clk_enable_autoidle_all(void) { struct clk *c; diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index c490240..46480fb 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -266,10 +266,10 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, return; } - r = omap_clk_get_by_name(clk_name); + r = clk_get(NULL, clk_name); if (IS_ERR(r)) { dev_err(&od->pdev->dev, - "omap_clk_get_by_name for %s failed\n", clk_name); + "clk_get for %s failed\n", clk_name); return; } -- cgit v0.10.2 From 5dcc3b975e972989574c009457f0e333c342910d Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Sat, 22 Sep 2012 02:24:17 -0600 Subject: ARM: OMAP2+: clock: Remove all direct dereferencing of struct clk While we move to Common Clk Framework (CCF), direct deferencing of struct clk wouldn't be possible anymore. Hence get rid of all such instances in the current clock code and use macros/helpers similar to the ones that are provided by CCF. While here also concatenate some strings split across multiple lines which seem to be needed anyway. Signed-off-by: Rajendra Nayak [paul@pwsan.com: simplified some compound expressions; reformatted some messages] Signed-off-by: Paul Walmsley Cc: Mike Turquette diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c index b19a1f7..c2d1521 100644 --- a/arch/arm/mach-omap2/clkt2xxx_apll.c +++ b/arch/arm/mach-omap2/clkt2xxx_apll.c @@ -59,7 +59,7 @@ static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask) omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); omap2_cm_wait_idlest(cm_idlest_pll, status_mask, - OMAP24XX_CM_IDLEST_VAL, clk->name); + OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk)); /* * REVISIT: Should we return an error code if omap2_wait_clock_ready() diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index cabcfdb..3524f0e7 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -68,14 +68,15 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk) long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) { const struct prcm_config *ptr; - long highest_rate; + long highest_rate, sys_clk_rate; highest_rate = -EINVAL; + sys_clk_rate = __clk_get_rate(sclk); for (ptr = rate_table; ptr->mpu_speed; ptr++) { if (!(ptr->flags & cpu_mask)) continue; - if (ptr->xtal_speed != sclk->rate) + if (ptr->xtal_speed != sys_clk_rate) continue; highest_rate = ptr->mpu_speed; @@ -94,12 +95,15 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) const struct prcm_config *prcm; unsigned long found_speed = 0; unsigned long flags; + long sys_clk_rate; + + sys_clk_rate = __clk_get_rate(sclk); for (prcm = rate_table; prcm->mpu_speed; prcm++) { if (!(prcm->flags & cpu_mask)) continue; - if (prcm->xtal_speed != sclk->rate) + if (prcm->xtal_speed != sys_clk_rate) continue; if (prcm->mpu_speed <= rate) { diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index d6e34dd..0fd8b70 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -56,6 +56,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) struct omap_sdrc_params *sdrc_cs0; struct omap_sdrc_params *sdrc_cs1; int ret; + unsigned long clkrate; if (!clk || !rate) return -EINVAL; @@ -64,11 +65,12 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (validrate != rate) return -EINVAL; - sdrcrate = sdrc_ick_p->rate; - if (rate > clk->rate) - sdrcrate <<= ((rate / clk->rate) >> 1); + sdrcrate = __clk_get_rate(sdrc_ick_p); + clkrate = __clk_get_rate(clk); + if (rate > clkrate) + sdrcrate <<= ((rate / clkrate) >> 1); else - sdrcrate >>= ((clk->rate / rate) >> 1); + sdrcrate >>= ((clkrate / rate) >> 1); ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1); if (ret) @@ -82,7 +84,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) /* * XXX This only needs to be done when the CPU frequency changes */ - _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ; + _mpurate = __clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ; c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; c += 1; /* for safety */ c *= SDRC_MPURATE_LOOPS; @@ -90,8 +92,8 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (c == 0) c = 1; - pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, - validrate); + pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", + clkrate, validrate); pr_debug("clock: SDRC CS0 timing params used:" " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, @@ -104,14 +106,14 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (sdrc_cs1) omap3_configure_core_dpll( - new_div, unlock_dll, c, rate > clk->rate, + new_div, unlock_dll, c, rate > clkrate, sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); else omap3_configure_core_dpll( - new_div, unlock_dll, c, rate > clk->rate, + new_div, unlock_dll, c, rate > clkrate, sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, 0, 0, 0, 0); diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index 04d551b..33382fb 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -71,8 +71,8 @@ static const struct clksel *_get_clksel_by_parent(struct clk *clk, if (!clks->parent) { /* This indicates a data problem */ - WARN(1, "clock: Could not find parent clock %s in clksel array " - "of clock %s\n", src_clk->name, clk->name); + WARN(1, "clock: %s: could not find parent clock %s in clksel array\n", + __clk_get_name(clk), __clk_get_name(src_clk)); return NULL; } @@ -126,8 +126,9 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk, if (max_div == 0) { /* This indicates an error in the clksel data */ - WARN(1, "clock: Could not find divisor for clock %s parent %s" - "\n", clk->name, src_clk->parent->name); + WARN(1, "clock: %s: could not find divisor for parent %s\n", + __clk_get_name(clk), + __clk_get_name(__clk_get_parent(src_clk))); return 0; } @@ -176,8 +177,10 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val) { const struct clksel *clks; const struct clksel_rate *clkr; + struct clk *parent; - clks = _get_clksel_by_parent(clk, clk->parent); + parent = __clk_get_parent(clk); + clks = _get_clksel_by_parent(clk, parent); if (!clks) return 0; @@ -191,8 +194,8 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val) if (!clkr->div) { /* This indicates a data error */ - WARN(1, "clock: Could not find fieldval %d for clock %s parent " - "%s\n", field_val, clk->name, clk->parent->name); + WARN(1, "clock: %s: could not find fieldval %d for parent %s\n", + __clk_get_name(clk), field_val, __clk_get_name(parent)); return 0; } @@ -213,11 +216,13 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div) { const struct clksel *clks; const struct clksel_rate *clkr; + struct clk *parent; /* should never happen */ WARN_ON(div == 0); - clks = _get_clksel_by_parent(clk, clk->parent); + parent = __clk_get_parent(clk); + clks = _get_clksel_by_parent(clk, parent); if (!clks) return ~0; @@ -230,8 +235,8 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div) } if (!clkr->div) { - pr_err("clock: Could not find divisor %d for clock %s parent " - "%s\n", div, clk->name, clk->parent->name); + pr_err("clock: %s: could not find divisor %d for parent %s\n", + __clk_get_name(clk), div, __clk_get_name(parent)); return ~0; } @@ -281,16 +286,23 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, const struct clksel *clks; const struct clksel_rate *clkr; u32 last_div = 0; + struct clk *parent; + unsigned long parent_rate; + const char *clk_name; + + parent = __clk_get_parent(clk); + parent_rate = __clk_get_rate(parent); + clk_name = __clk_get_name(clk); if (!clk->clksel || !clk->clksel_mask) return ~0; pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n", - clk->name, target_rate); + clk_name, target_rate); *new_div = 1; - clks = _get_clksel_by_parent(clk, clk->parent); + clks = _get_clksel_by_parent(clk, parent); if (!clks) return ~0; @@ -300,30 +312,29 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, /* Sanity check */ if (clkr->div <= last_div) - pr_err("clock: clksel_rate table not sorted " - "for clock %s", clk->name); + pr_err("clock: %s: clksel_rate table not sorted\n", + clk_name); last_div = clkr->div; - test_rate = clk->parent->rate / clkr->div; + test_rate = parent_rate / clkr->div; if (test_rate <= target_rate) break; /* found it */ } if (!clkr->div) { - pr_err("clock: Could not find divisor for target " - "rate %ld for clock %s parent %s\n", target_rate, - clk->name, clk->parent->name); + pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n", + clk_name, target_rate, __clk_get_name(parent)); return ~0; } *new_div = clkr->div; pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div, - (clk->parent->rate / clkr->div)); + (parent_rate / clkr->div)); - return clk->parent->rate / clkr->div; + return parent_rate / clkr->div; } /* @@ -345,10 +356,15 @@ void omap2_init_clksel_parent(struct clk *clk) const struct clksel *clks; const struct clksel_rate *clkr; u32 r, found = 0; + struct clk *parent; + const char *clk_name; if (!clk->clksel || !clk->clksel_mask) return; + parent = __clk_get_parent(clk); + clk_name = __clk_get_name(clk); + r = __raw_readl(clk->clksel_reg) & clk->clksel_mask; r >>= __ffs(clk->clksel_mask); @@ -358,12 +374,14 @@ void omap2_init_clksel_parent(struct clk *clk) continue; if (clkr->val == r) { - if (clk->parent != clks->parent) { + if (parent != clks->parent) { pr_debug("clock: inited %s parent " "to %s (was %s)\n", - clk->name, clks->parent->name, - ((clk->parent) ? - clk->parent->name : "NULL")); + clk_name, + __clk_get_name(clks->parent), + ((parent) ? + __clk_get_name(parent) : + "NULL")); clk_reparent(clk, clks->parent); }; found = 1; @@ -373,7 +391,7 @@ void omap2_init_clksel_parent(struct clk *clk) /* This indicates a data error */ WARN(!found, "clock: %s: init parent: could not find regval %0x\n", - clk->name, r); + clk_name, r); return; } @@ -391,15 +409,17 @@ unsigned long omap2_clksel_recalc(struct clk *clk) { unsigned long rate; u32 div = 0; + struct clk *parent; div = _read_divisor(clk); if (div == 0) - return clk->rate; + return __clk_get_rate(clk); - rate = clk->parent->rate / div; + parent = __clk_get_parent(clk); + rate = __clk_get_rate(parent) / div; - pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", clk->name, - rate, div); + pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", + __clk_get_name(clk), rate, div); return rate; } @@ -454,9 +474,10 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate) _write_clksel_reg(clk, field_val); - clk->rate = clk->parent->rate / new_div; + clk->rate = __clk_get_rate(__clk_get_parent(clk)) / new_div; - pr_debug("clock: %s: set rate to %ld\n", clk->name, clk->rate); + pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(clk), + __clk_get_rate(clk)); return 0; } @@ -498,13 +519,15 @@ int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent) clk_reparent(clk, new_parent); /* CLKSEL clocks follow their parents' rates, divided by a divisor */ - clk->rate = new_parent->rate; + clk->rate = __clk_get_rate(new_parent); if (parent_div > 0) - clk->rate /= parent_div; + __clk_get_rate(clk) /= parent_div; pr_debug("clock: %s: set parent to %s (new rate %ld)\n", - clk->name, clk->parent->name, clk->rate); + __clk_get_name(clk), + __clk_get_name(__clk_get_parent(clk)), + __clk_get_rate(clk)); return 0; } diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 0bf0ec3..470828e 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -87,7 +87,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n) dd = clk->dpll_data; /* DPLL divider must result in a valid jitter correction val */ - fint = clk->parent->rate / n; + fint = __clk_get_rate(__clk_get_parent(clk)) / n; if (cpu_is_omap24xx()) { /* Should not be called for OMAP2, so warn if it is called */ @@ -252,16 +252,16 @@ u32 omap2_get_dpll_rate(struct clk *clk) if (cpu_is_omap24xx()) { if (v == OMAP2XXX_EN_DPLL_LPBYPASS || v == OMAP2XXX_EN_DPLL_FRBYPASS) - return dd->clk_bypass->rate; + return __clk_get_rate(dd->clk_bypass); } else if (cpu_is_omap34xx()) { if (v == OMAP3XXX_EN_DPLL_LPBYPASS || v == OMAP3XXX_EN_DPLL_FRBYPASS) - return dd->clk_bypass->rate; + return __clk_get_rate(dd->clk_bypass); } else if (soc_is_am33xx() || cpu_is_omap44xx()) { if (v == OMAP4XXX_EN_DPLL_LPBYPASS || v == OMAP4XXX_EN_DPLL_FRBYPASS || v == OMAP4XXX_EN_DPLL_MNBYPASS) - return dd->clk_bypass->rate; + return __clk_get_rate(dd->clk_bypass); } v = __raw_readl(dd->mult_div1_reg); @@ -270,7 +270,7 @@ u32 omap2_get_dpll_rate(struct clk *clk) dpll_div = v & dd->div1_mask; dpll_div >>= __ffs(dd->div1_mask); - dpll_clk = (long long)dd->clk_ref->rate * dpll_mult; + dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult; do_div(dpll_clk, dpll_div + 1); return dpll_clk; @@ -296,16 +296,20 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) unsigned long scaled_rt_rp; unsigned long new_rate = 0; struct dpll_data *dd; + unsigned long ref_rate; + const char *clk_name; if (!clk || !clk->dpll_data) return ~0; dd = clk->dpll_data; + ref_rate = __clk_get_rate(dd->clk_ref); + clk_name = __clk_get_name(clk); pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n", - clk->name, target_rate); + clk_name, target_rate); - scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR); + scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR); scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR; dd->last_rounded_rate = 0; @@ -332,14 +336,14 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) break; r = _dpll_test_mult(&m, n, &new_rate, target_rate, - dd->clk_ref->rate); + ref_rate); /* m can't be set low enough for this n - try with a larger n */ if (r == DPLL_MULT_UNDERFLOW) continue; pr_debug("clock: %s: m = %d: n = %d: new_rate = %ld\n", - clk->name, m, n, new_rate); + clk_name, m, n, new_rate); if (target_rate == new_rate) { dd->last_rounded_m = m; @@ -350,8 +354,8 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) } if (target_rate != new_rate) { - pr_debug("clock: %s: cannot round to rate %ld\n", clk->name, - target_rate); + pr_debug("clock: %s: cannot round to rate %ld\n", + clk_name, target_rate); return ~0; } diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 1a1f97f..fbcd82b 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -78,7 +78,7 @@ static void _omap2_module_wait_ready(struct clk *clk) clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val); omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val, - clk->name); + __clk_get_name(clk)); } /* Public functions */ @@ -94,18 +94,21 @@ static void _omap2_module_wait_ready(struct clk *clk) void omap2_init_clk_clkdm(struct clk *clk) { struct clockdomain *clkdm; + const char *clk_name; if (!clk->clkdm_name) return; + clk_name = __clk_get_name(clk); + clkdm = clkdm_lookup(clk->clkdm_name); if (clkdm) { pr_debug("clock: associated clk %s to clkdm %s\n", - clk->name, clk->clkdm_name); + clk_name, clk->clkdm_name); clk->clkdm = clkdm; } else { - pr_debug("clock: could not associate clk %s to " - "clkdm %s\n", clk->name, clk->clkdm_name); + pr_debug("clock: could not associate clk %s to clkdm %s\n", + clk_name, clk->clkdm_name); } } diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index f48043db..02e74c1 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -63,8 +63,10 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state) const struct dpll_data *dd; int i = 0; int ret = -EINVAL; + const char *clk_name; dd = clk->dpll_data; + clk_name = __clk_get_name(clk); state <<= __ffs(dd->idlest_mask); @@ -76,10 +78,10 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state) if (i == MAX_DPLL_WAIT_TRIES) { printk(KERN_ERR "clock: %s failed transition to '%s'\n", - clk->name, (state) ? "locked" : "bypassed"); + clk_name, (state) ? "locked" : "bypassed"); } else { pr_debug("clock: %s transition to '%s' in %d loops\n", - clk->name, (state) ? "locked" : "bypassed", i); + clk_name, (state) ? "locked" : "bypassed", i); ret = 0; } @@ -93,7 +95,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) unsigned long fint; u16 f = 0; - fint = clk->dpll_data->clk_ref->rate / n; + fint = __clk_get_rate(clk->dpll_data->clk_ref) / n; pr_debug("clock: fint is %lu\n", fint); @@ -140,7 +142,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk) u8 state = 1; int r = 0; - pr_debug("clock: locking DPLL %s\n", clk->name); + pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk)); dd = clk->dpll_data; state <<= __ffs(dd->idlest_mask); @@ -187,7 +189,7 @@ static int _omap3_noncore_dpll_bypass(struct clk *clk) return -EINVAL; pr_debug("clock: configuring DPLL %s for low-power bypass\n", - clk->name); + __clk_get_name(clk)); ai = omap3_dpll_autoidle_read(clk); @@ -217,7 +219,7 @@ static int _omap3_noncore_dpll_stop(struct clk *clk) if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP))) return -EINVAL; - pr_debug("clock: stopping DPLL %s\n", clk->name); + pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk)); ai = omap3_dpll_autoidle_read(clk); @@ -245,7 +247,7 @@ static void _lookup_dco(struct clk *clk, u8 *dco, u16 m, u8 n) { unsigned long fint, clkinp; /* watch out for overflow */ - clkinp = clk->parent->rate; + clkinp = __clk_get_rate(__clk_get_parent(clk)); fint = (clkinp / n) * m; if (fint < 1000000000) @@ -271,7 +273,7 @@ static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n) unsigned long clkinp, sd; /* watch out for overflow */ int mod1, mod2; - clkinp = clk->parent->rate; + clkinp = __clk_get_rate(__clk_get_parent(clk)); /* * target sigma-delta to near 250MHz @@ -380,16 +382,19 @@ int omap3_noncore_dpll_enable(struct clk *clk) { int r; struct dpll_data *dd; + struct clk *parent; dd = clk->dpll_data; if (!dd) return -EINVAL; - if (clk->rate == dd->clk_bypass->rate) { - WARN_ON(clk->parent != dd->clk_bypass); + parent = __clk_get_parent(clk); + + if (__clk_get_rate(clk) == __clk_get_rate(dd->clk_bypass)) { + WARN_ON(parent != dd->clk_bypass); r = _omap3_noncore_dpll_bypass(clk); } else { - WARN_ON(clk->parent != dd->clk_ref); + WARN_ON(parent != dd->clk_ref); r = _omap3_noncore_dpll_lock(clk); } /* @@ -432,7 +437,7 @@ void omap3_noncore_dpll_disable(struct clk *clk) int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) { struct clk *new_parent = NULL; - unsigned long hw_rate; + unsigned long hw_rate, bypass_rate; u16 freqsel = 0; struct dpll_data *dd; int ret; @@ -456,7 +461,8 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) omap2_clk_enable(dd->clk_bypass); omap2_clk_enable(dd->clk_ref); - if (dd->clk_bypass->rate == rate && + bypass_rate = __clk_get_rate(dd->clk_bypass); + if (bypass_rate == rate && (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) { pr_debug("clock: %s: set rate: entering bypass.\n", clk->name); @@ -479,7 +485,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) } pr_debug("clock: %s: set rate: locking rate to %lu.\n", - clk->name, rate); + __clk_get_name(clk), rate); ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m, dd->last_rounded_n, freqsel); @@ -557,7 +563,7 @@ void omap3_dpll_allow_idle(struct clk *clk) if (!dd->autoidle_reg) { pr_debug("clock: DPLL %s: autoidle not supported\n", - clk->name); + __clk_get_name(clk)); return; } @@ -591,7 +597,7 @@ void omap3_dpll_deny_idle(struct clk *clk) if (!dd->autoidle_reg) { pr_debug("clock: DPLL %s: autoidle not supported\n", - clk->name); + __clk_get_name(clk)); return; } @@ -617,11 +623,12 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk) unsigned long rate; u32 v; struct clk *pclk; + unsigned long parent_rate; /* Walk up the parents of clk, looking for a DPLL */ - pclk = clk->parent; + pclk = __clk_get_parent(clk); while (pclk && !pclk->dpll_data) - pclk = pclk->parent; + pclk = __clk_get_parent(pclk); /* clk does not have a DPLL as a parent? */ WARN_ON(!pclk); @@ -630,12 +637,13 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk) WARN_ON(!dd->enable_mask); + parent_rate = __clk_get_rate(__clk_get_parent(clk)); v = __raw_readl(dd->control_reg) & dd->enable_mask; v >>= __ffs(dd->enable_mask); if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE)) - rate = clk->parent->rate; + rate = parent_rate; else - rate = clk->parent->rate * 2; + rate = parent_rate * 2; return rate; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 428dca6..acff6b7 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -697,7 +697,7 @@ static int _init_main_clk(struct omap_hwmod *oh) if (!oh->_clk->clkdm) pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n", - oh->main_clk, oh->_clk->name); + oh->name, oh->main_clk); return ret; } @@ -854,7 +854,7 @@ static void _enable_optional_clocks(struct omap_hwmod *oh) for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) if (oc->_clk) { pr_debug("omap_hwmod: enable %s:%s\n", oc->role, - oc->_clk->name); + __clk_get_name(oc->_clk)); clk_enable(oc->_clk); } } @@ -869,7 +869,7 @@ static void _disable_optional_clocks(struct omap_hwmod *oh) for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) if (oc->_clk) { pr_debug("omap_hwmod: disable %s:%s\n", oc->role, - oc->_clk->name); + __clk_get_name(oc->_clk)); clk_disable(oc->_clk); } } diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 9cb5ced..40012e3 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -188,7 +188,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, goto exit; } - freq = clk->rate; + freq = clk_get_rate(clk); clk_put(clk); rcu_read_lock(); diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 656b986..e2e2d04 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -19,6 +19,11 @@ struct module; struct clk; struct clockdomain; +/* Temporary, needed during the common clock framework conversion */ +#define __clk_get_name(clk) (clk->name) +#define __clk_get_parent(clk) (clk->parent) +#define __clk_get_rate(clk) (clk->rate) + /** * struct clkops - some clock function pointers * @enable: fn ptr that enables the current clock in hardware -- cgit v0.10.2 From f19a302247735876e08e95966ff5668e01946972 Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Wed, 19 Sep 2012 18:04:14 -0600 Subject: ARM: OMAP4: cm: add bitfield width values The new common clk framework includes basic definitions for mux and divider clocks. These definitions depend on shift and width values instead of the pre-computed masks that the OMAP clk framework has traditionally used when accessing the register to control the mux or divisor. To ease this transition the masks are left intact and the width field is simply added alongside the shift and mask data. Signed-off-by: Mike Turquette Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h index 65597a7..4c6c2f7 100644 --- a/arch/arm/mach-omap2/cm-regbits-44xx.h +++ b/arch/arm/mach-omap2/cm-regbits-44xx.h @@ -1,7 +1,7 @@ /* * OMAP44xx Clock Management register bits * - * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2012 Texas Instruments, Inc. * Copyright (C) 2009-2010 Nokia Corporation * * Paul Walmsley (paul@pwsan.com) @@ -24,6 +24,7 @@ /* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ #define OMAP4430_ABE_DYNDEP_SHIFT 3 +#define OMAP4430_ABE_DYNDEP_WIDTH 0x1 #define OMAP4430_ABE_DYNDEP_MASK (1 << 3) /* @@ -31,14 +32,17 @@ * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_ABE_STATDEP_SHIFT 3 +#define OMAP4430_ABE_STATDEP_WIDTH 0x1 #define OMAP4430_ABE_STATDEP_MASK (1 << 3) /* Used by CM_L4CFG_DYNAMICDEP */ #define OMAP4430_ALWONCORE_DYNDEP_SHIFT 16 +#define OMAP4430_ALWONCORE_DYNDEP_WIDTH 0x1 #define OMAP4430_ALWONCORE_DYNDEP_MASK (1 << 16) /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_ALWONCORE_STATDEP_SHIFT 16 +#define OMAP4430_ALWONCORE_STATDEP_WIDTH 0x1 #define OMAP4430_ALWONCORE_STATDEP_MASK (1 << 16) /* @@ -47,294 +51,367 @@ * CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB */ #define OMAP4430_AUTO_DPLL_MODE_SHIFT 0 +#define OMAP4430_AUTO_DPLL_MODE_WIDTH 0x3 #define OMAP4430_AUTO_DPLL_MODE_MASK (0x7 << 0) /* Used by CM_L4CFG_DYNAMICDEP */ #define OMAP4430_CEFUSE_DYNDEP_SHIFT 17 +#define OMAP4430_CEFUSE_DYNDEP_WIDTH 0x1 #define OMAP4430_CEFUSE_DYNDEP_MASK (1 << 17) /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_CEFUSE_STATDEP_SHIFT 17 +#define OMAP4430_CEFUSE_STATDEP_WIDTH 0x1 #define OMAP4430_CEFUSE_STATDEP_MASK (1 << 17) /* Used by CM1_ABE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT 13 +#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK (1 << 13) /* Used by CM1_ABE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT 12 +#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK (1 << 12) /* Used by CM_WKUP_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT 9 +#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK (1 << 9) /* Used by CM1_ABE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT 11 +#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK (1 << 11) /* Used by CM1_ABE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK (1 << 8) /* Used by CM_MEMIF_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT 11 +#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK (1 << 11) /* Used by CM_MEMIF_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT 12 +#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK (1 << 12) /* Used by CM_MEMIF_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT 13 +#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK (1 << 13) /* Used by CM_CAM_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT 9 +#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK (1 << 9) /* Used by CM_ALWON_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_SHIFT 12 +#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_MASK (1 << 12) /* Used by CM_EMU_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT 9 +#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK (1 << 9) /* Used by CM_L4CFG_CLKSTCTRL */ #define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_SHIFT 9 +#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_WIDTH 0x1 #define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_MASK (1 << 9) /* Used by CM_CEFUSE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9 +#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9) /* Used by CM_MEMIF_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT 9 +#define OMAP4430_CLKACTIVITY_DLL_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_DLL_CLK_MASK (1 << 9) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT 9 +#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK (1 << 9) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT 10 +#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK (1 << 10) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT 11 +#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK (1 << 11) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT 12 +#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK (1 << 12) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT 13 +#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK (1 << 13) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT 14 +#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK (1 << 14) /* Used by CM_DSS_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT 10 +#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK (1 << 10) /* Used by CM_DSS_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT 9 +#define OMAP4430_CLKACTIVITY_DSS_FCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK (1 << 9) /* Used by CM_DUCATI_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK (1 << 8) /* Used by CM_EMU_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK (1 << 8) /* Used by CM_CAM_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT 10 +#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK (1 << 10) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT 15 +#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK (1 << 15) /* Used by CM1_ABE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT 10 +#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK (1 << 10) /* Used by CM_DSS_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT 11 +#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK (1 << 11) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT 20 +#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK (1 << 20) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT 26 +#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK (1 << 26) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT 21 +#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK (1 << 21) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT 27 +#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK (1 << 27) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT 13 +#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK (1 << 13) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT 12 +#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK (1 << 12) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT 28 +#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK (1 << 28) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT 29 +#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK (1 << 29) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT 11 +#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK (1 << 11) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT 16 +#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK (1 << 16) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT 17 +#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK (1 << 17) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT 18 +#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK (1 << 18) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT 19 +#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK (1 << 19) /* Used by CM_CAM_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_ISS_GCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK (1 << 8) /* Used by CM_IVAHD_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK (1 << 8) /* Used by CM_D2D_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_SHIFT 10 +#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_MASK (1 << 10) /* Used by CM_L3_1_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L3_1_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK (1 << 8) /* Used by CM_L3_2_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L3_2_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK (1 << 8) /* Used by CM_D2D_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK (1 << 8) /* Used by CM_SDMA_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK (1 << 8) /* Used by CM_DSS_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK (1 << 8) /* Used by CM_MEMIF_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK (1 << 8) /* Used by CM_GFX_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK (1 << 8) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK (1 << 8) /* Used by CM_L3INSTR_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK (1 << 8) /* Used by CM_L4SEC_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK (1 << 8) /* Used by CM_ALWON_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK (1 << 8) /* Used by CM_CEFUSE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK (1 << 8) /* Used by CM_L4CFG_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK (1 << 8) /* Used by CM_D2D_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT 9 +#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK (1 << 9) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT 9 +#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK (1 << 9) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK (1 << 8) /* Used by CM_L4SEC_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT 9 +#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK (1 << 9) /* Used by CM_WKUP_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT 12 +#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK (1 << 12) /* Used by CM_MPU_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK (1 << 8) /* Used by CM1_ABE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT 9 +#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK (1 << 9) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT 16 +#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK (1 << 16) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT 17 +#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK (1 << 17) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT 18 +#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK (1 << 18) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT 19 +#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK (1 << 19) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT 25 +#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK (1 << 25) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT 20 +#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK (1 << 20) /* Used by CM_L4PER_CLKSTCTRL */ @@ -343,94 +420,114 @@ /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT 22 +#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK (1 << 22) /* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT 24 +#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK (1 << 24) /* Used by CM_MEMIF_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT 10 +#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK (1 << 10) /* Used by CM_GFX_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT 9 +#define OMAP4430_CLKACTIVITY_SGX_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK (1 << 9) /* Used by CM_ALWON_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT 11 +#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK (1 << 11) /* Used by CM_ALWON_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT 10 +#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK (1 << 10) /* Used by CM_ALWON_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT 9 +#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK (1 << 9) /* Used by CM_WKUP_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_SYS_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_SYS_CLK_MASK (1 << 8) /* Used by CM_TESLA_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT 8 +#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK (1 << 8) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT 22 +#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK (1 << 22) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT 23 +#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK (1 << 23) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT 24 +#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK (1 << 24) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_SHIFT 10 +#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_MASK (1 << 10) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_SHIFT 14 +#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_MASK (1 << 14) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT 15 +#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK (1 << 15) /* Used by CM_WKUP_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT 10 +#define OMAP4430_CLKACTIVITY_USIM_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK (1 << 10) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT 30 +#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK (1 << 30) /* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT 25 +#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK (1 << 25) /* Used by CM_WKUP_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT 11 +#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_WIDTH 0x1 #define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK (1 << 11) /* Used by CM_WKUP_CLKSTCTRL */ #define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_SHIFT 13 +#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_WIDTH 0x1 #define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_MASK (1 << 13) /* * Used by CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, * CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, - * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, + * CM_L3INIT_MMC2_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL, * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL, - * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, - * CM_WKUP_TIMER1_CLKCTRL + * CM_L4PER_DMTIMER9_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL */ #define OMAP4430_CLKSEL_SHIFT 24 +#define OMAP4430_CLKSEL_WIDTH 0x1 #define OMAP4430_CLKSEL_MASK (1 << 24) /* @@ -438,50 +535,62 @@ * CM_CLKSEL_DUCATI_ISS_ROOT, CM_CLKSEL_USB_60MHZ, CM_L4_WKUP_CLKSEL */ #define OMAP4430_CLKSEL_0_0_SHIFT 0 +#define OMAP4430_CLKSEL_0_0_WIDTH 0x1 #define OMAP4430_CLKSEL_0_0_MASK (1 << 0) /* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */ #define OMAP4430_CLKSEL_0_1_SHIFT 0 +#define OMAP4430_CLKSEL_0_1_WIDTH 0x2 #define OMAP4430_CLKSEL_0_1_MASK (0x3 << 0) /* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */ #define OMAP4430_CLKSEL_24_25_SHIFT 24 +#define OMAP4430_CLKSEL_24_25_WIDTH 0x2 #define OMAP4430_CLKSEL_24_25_MASK (0x3 << 24) /* Used by CM_L3INIT_USB_OTG_CLKCTRL */ #define OMAP4430_CLKSEL_60M_SHIFT 24 +#define OMAP4430_CLKSEL_60M_WIDTH 0x1 #define OMAP4430_CLKSEL_60M_MASK (1 << 24) /* Used by CM_MPU_MPU_CLKCTRL */ #define OMAP4460_CLKSEL_ABE_DIV_MODE_SHIFT 25 +#define OMAP4460_CLKSEL_ABE_DIV_MODE_WIDTH 0x1 #define OMAP4460_CLKSEL_ABE_DIV_MODE_MASK (1 << 25) /* Used by CM1_ABE_AESS_CLKCTRL */ #define OMAP4430_CLKSEL_AESS_FCLK_SHIFT 24 +#define OMAP4430_CLKSEL_AESS_FCLK_WIDTH 0x1 #define OMAP4430_CLKSEL_AESS_FCLK_MASK (1 << 24) /* Used by CM_CLKSEL_CORE */ #define OMAP4430_CLKSEL_CORE_SHIFT 0 +#define OMAP4430_CLKSEL_CORE_WIDTH 0x1 #define OMAP4430_CLKSEL_CORE_MASK (1 << 0) /* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */ #define OMAP4430_CLKSEL_CORE_1_1_SHIFT 1 +#define OMAP4430_CLKSEL_CORE_1_1_WIDTH 0x1 #define OMAP4430_CLKSEL_CORE_1_1_MASK (1 << 1) /* Used by CM_WKUP_USIM_CLKCTRL */ #define OMAP4430_CLKSEL_DIV_SHIFT 24 +#define OMAP4430_CLKSEL_DIV_WIDTH 0x1 #define OMAP4430_CLKSEL_DIV_MASK (1 << 24) /* Used by CM_MPU_MPU_CLKCTRL */ #define OMAP4460_CLKSEL_EMIF_DIV_MODE_SHIFT 24 +#define OMAP4460_CLKSEL_EMIF_DIV_MODE_WIDTH 0x1 #define OMAP4460_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24) /* Used by CM_CAM_FDIF_CLKCTRL */ #define OMAP4430_CLKSEL_FCLK_SHIFT 24 +#define OMAP4430_CLKSEL_FCLK_WIDTH 0x2 #define OMAP4430_CLKSEL_FCLK_MASK (0x3 << 24) /* Used by CM_L4PER_MCBSP4_CLKCTRL */ #define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT 25 +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH 0x1 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK (1 << 25) /* @@ -490,34 +599,42 @@ * CM1_ABE_MCBSP3_CLKCTRL */ #define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT 26 +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_WIDTH 0x2 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK (0x3 << 26) /* Used by CM_CLKSEL_CORE */ #define OMAP4430_CLKSEL_L3_SHIFT 4 +#define OMAP4430_CLKSEL_L3_WIDTH 0x1 #define OMAP4430_CLKSEL_L3_MASK (1 << 4) /* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */ #define OMAP4430_CLKSEL_L3_SHADOW_SHIFT 2 +#define OMAP4430_CLKSEL_L3_SHADOW_WIDTH 0x1 #define OMAP4430_CLKSEL_L3_SHADOW_MASK (1 << 2) /* Used by CM_CLKSEL_CORE */ #define OMAP4430_CLKSEL_L4_SHIFT 8 +#define OMAP4430_CLKSEL_L4_WIDTH 0x1 #define OMAP4430_CLKSEL_L4_MASK (1 << 8) /* Used by CM_CLKSEL_ABE */ #define OMAP4430_CLKSEL_OPP_SHIFT 0 +#define OMAP4430_CLKSEL_OPP_WIDTH 0x2 #define OMAP4430_CLKSEL_OPP_MASK (0x3 << 0) /* Used by CM_EMU_DEBUGSS_CLKCTRL */ #define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT 27 +#define OMAP4430_CLKSEL_PMD_STM_CLK_WIDTH 0x3 #define OMAP4430_CLKSEL_PMD_STM_CLK_MASK (0x7 << 27) /* Used by CM_EMU_DEBUGSS_CLKCTRL */ #define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT 24 +#define OMAP4430_CLKSEL_PMD_TRACE_CLK_WIDTH 0x3 #define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK (0x7 << 24) /* Used by CM_GFX_GFX_CLKCTRL */ #define OMAP4430_CLKSEL_SGX_FCLK_SHIFT 24 +#define OMAP4430_CLKSEL_SGX_FCLK_WIDTH 0x1 #define OMAP4430_CLKSEL_SGX_FCLK_MASK (1 << 24) /* @@ -525,18 +642,22 @@ * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL */ #define OMAP4430_CLKSEL_SOURCE_SHIFT 24 +#define OMAP4430_CLKSEL_SOURCE_WIDTH 0x2 #define OMAP4430_CLKSEL_SOURCE_MASK (0x3 << 24) /* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */ #define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT 24 +#define OMAP4430_CLKSEL_SOURCE_24_24_WIDTH 0x1 #define OMAP4430_CLKSEL_SOURCE_24_24_MASK (1 << 24) /* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_CLKSEL_UTMI_P1_SHIFT 24 +#define OMAP4430_CLKSEL_UTMI_P1_WIDTH 0x1 #define OMAP4430_CLKSEL_UTMI_P1_MASK (1 << 24) /* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_CLKSEL_UTMI_P2_SHIFT 25 +#define OMAP4430_CLKSEL_UTMI_P2_WIDTH 0x1 #define OMAP4430_CLKSEL_UTMI_P2_MASK (1 << 25) /* @@ -549,30 +670,37 @@ * CM_TESLA_CLKSTCTRL, CM_WKUP_CLKSTCTRL */ #define OMAP4430_CLKTRCTRL_SHIFT 0 +#define OMAP4430_CLKTRCTRL_WIDTH 0x2 #define OMAP4430_CLKTRCTRL_MASK (0x3 << 0) /* Used by CM_EMU_OVERRIDE_DPLL_CORE */ #define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT 0 +#define OMAP4430_CORE_DPLL_EMU_DIV_WIDTH 0x7 #define OMAP4430_CORE_DPLL_EMU_DIV_MASK (0x7f << 0) /* Used by CM_EMU_OVERRIDE_DPLL_CORE */ #define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT 8 +#define OMAP4430_CORE_DPLL_EMU_MULT_WIDTH 0xb #define OMAP4430_CORE_DPLL_EMU_MULT_MASK (0x7ff << 8) /* Used by REVISION_CM1, REVISION_CM2 */ #define OMAP4430_CUSTOM_SHIFT 6 +#define OMAP4430_CUSTOM_WIDTH 0x2 #define OMAP4430_CUSTOM_MASK (0x3 << 6) /* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ #define OMAP4430_D2D_DYNDEP_SHIFT 18 +#define OMAP4430_D2D_DYNDEP_WIDTH 0x1 #define OMAP4430_D2D_DYNDEP_MASK (1 << 18) /* Used by CM_MPU_STATICDEP */ #define OMAP4430_D2D_STATDEP_SHIFT 18 +#define OMAP4430_D2D_STATDEP_WIDTH 0x1 #define OMAP4430_D2D_STATDEP_MASK (1 << 18) /* Used by CM_CLKSEL_DPLL_MPU */ #define OMAP4460_DCC_COUNT_MAX_SHIFT 24 +#define OMAP4460_DCC_COUNT_MAX_WIDTH 0x8 #define OMAP4460_DCC_COUNT_MAX_MASK (0xff << 24) /* Used by CM_CLKSEL_DPLL_MPU */ @@ -586,22 +714,27 @@ * CM_SSC_DELTAMSTEP_DPLL_UNIPRO, CM_SSC_DELTAMSTEP_DPLL_USB */ #define OMAP4430_DELTAMSTEP_SHIFT 0 +#define OMAP4430_DELTAMSTEP_WIDTH 0x14 #define OMAP4430_DELTAMSTEP_MASK (0xfffff << 0) /* Renamed from DELTAMSTEP Used by CM_SSC_DELTAMSTEP_DPLL_USB */ #define OMAP4460_DELTAMSTEP_0_20_SHIFT 0 +#define OMAP4460_DELTAMSTEP_0_20_WIDTH 0x15 #define OMAP4460_DELTAMSTEP_0_20_MASK (0x1fffff << 0) /* Used by CM_DLL_CTRL */ #define OMAP4430_DLL_OVERRIDE_SHIFT 0 +#define OMAP4430_DLL_OVERRIDE_WIDTH 0x1 #define OMAP4430_DLL_OVERRIDE_MASK (1 << 0) /* Renamed from DLL_OVERRIDE Used by CM_SHADOW_FREQ_CONFIG1 */ #define OMAP4430_DLL_OVERRIDE_2_2_SHIFT 2 +#define OMAP4430_DLL_OVERRIDE_2_2_WIDTH 0x1 #define OMAP4430_DLL_OVERRIDE_2_2_MASK (1 << 2) /* Used by CM_SHADOW_FREQ_CONFIG1 */ #define OMAP4430_DLL_RESET_SHIFT 3 +#define OMAP4430_DLL_RESET_WIDTH 0x1 #define OMAP4430_DLL_RESET_MASK (1 << 3) /* @@ -610,30 +743,37 @@ * CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB */ #define OMAP4430_DPLL_BYP_CLKSEL_SHIFT 23 +#define OMAP4430_DPLL_BYP_CLKSEL_WIDTH 0x1 #define OMAP4430_DPLL_BYP_CLKSEL_MASK (1 << 23) /* Used by CM_CLKDCOLDO_DPLL_USB */ #define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8 +#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_WIDTH 0x1 #define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK (1 << 8) /* Used by CM_CLKSEL_DPLL_CORE */ #define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT 20 +#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_WIDTH 0x1 #define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK (1 << 20) /* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */ #define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT 0 +#define OMAP4430_DPLL_CLKOUTHIF_DIV_WIDTH 0x5 #define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK (0x1f << 0) /* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */ #define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT 5 +#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_WIDTH 0x1 #define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK (1 << 5) /* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */ #define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT 8 +#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_WIDTH 0x1 #define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK (1 << 8) /* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */ #define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT 10 +#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_WIDTH 0x1 #define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10) /* @@ -641,10 +781,12 @@ * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */ #define OMAP4430_DPLL_CLKOUT_DIV_SHIFT 0 +#define OMAP4430_DPLL_CLKOUT_DIV_WIDTH 0x5 #define OMAP4430_DPLL_CLKOUT_DIV_MASK (0x1f << 0) /* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */ #define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT 0 +#define OMAP4430_DPLL_CLKOUT_DIV_0_6_WIDTH 0x7 #define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK (0x7f << 0) /* @@ -652,10 +794,12 @@ * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */ #define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT 5 +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_WIDTH 0x1 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK (1 << 5) /* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */ #define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT 7 +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_WIDTH 0x1 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK (1 << 7) /* @@ -663,18 +807,22 @@ * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB */ #define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT 8 +#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_WIDTH 0x1 #define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8) /* Used by CM_SHADOW_FREQ_CONFIG1 */ #define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT 8 +#define OMAP4430_DPLL_CORE_DPLL_EN_WIDTH 0x3 #define OMAP4430_DPLL_CORE_DPLL_EN_MASK (0x7 << 8) /* Used by CM_SHADOW_FREQ_CONFIG1 */ #define OMAP4430_DPLL_CORE_M2_DIV_SHIFT 11 +#define OMAP4430_DPLL_CORE_M2_DIV_WIDTH 0x5 #define OMAP4430_DPLL_CORE_M2_DIV_MASK (0x1f << 11) /* Used by CM_SHADOW_FREQ_CONFIG2 */ #define OMAP4430_DPLL_CORE_M5_DIV_SHIFT 3 +#define OMAP4430_DPLL_CORE_M5_DIV_WIDTH 0x5 #define OMAP4430_DPLL_CORE_M5_DIV_MASK (0x1f << 3) /* @@ -683,10 +831,12 @@ * CM_CLKSEL_DPLL_UNIPRO */ #define OMAP4430_DPLL_DIV_SHIFT 0 +#define OMAP4430_DPLL_DIV_WIDTH 0x7 #define OMAP4430_DPLL_DIV_MASK (0x7f << 0) /* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */ #define OMAP4430_DPLL_DIV_0_7_SHIFT 0 +#define OMAP4430_DPLL_DIV_0_7_WIDTH 0x8 #define OMAP4430_DPLL_DIV_0_7_MASK (0xff << 0) /* @@ -694,10 +844,12 @@ * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER */ #define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT 8 +#define OMAP4430_DPLL_DRIFTGUARD_EN_WIDTH 0x1 #define OMAP4430_DPLL_DRIFTGUARD_EN_MASK (1 << 8) /* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */ #define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT 3 +#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_WIDTH 0x1 #define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK (1 << 3) /* @@ -706,6 +858,7 @@ * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB */ #define OMAP4430_DPLL_EN_SHIFT 0 +#define OMAP4430_DPLL_EN_WIDTH 0x3 #define OMAP4430_DPLL_EN_MASK (0x7 << 0) /* @@ -714,6 +867,7 @@ * CM_CLKMODE_DPLL_UNIPRO */ #define OMAP4430_DPLL_LPMODE_EN_SHIFT 10 +#define OMAP4430_DPLL_LPMODE_EN_WIDTH 0x1 #define OMAP4430_DPLL_LPMODE_EN_MASK (1 << 10) /* @@ -722,10 +876,12 @@ * CM_CLKSEL_DPLL_UNIPRO */ #define OMAP4430_DPLL_MULT_SHIFT 8 +#define OMAP4430_DPLL_MULT_WIDTH 0xb #define OMAP4430_DPLL_MULT_MASK (0x7ff << 8) /* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */ #define OMAP4430_DPLL_MULT_USB_SHIFT 8 +#define OMAP4430_DPLL_MULT_USB_WIDTH 0xc #define OMAP4430_DPLL_MULT_USB_MASK (0xfff << 8) /* @@ -734,10 +890,12 @@ * CM_CLKMODE_DPLL_UNIPRO */ #define OMAP4430_DPLL_REGM4XEN_SHIFT 11 +#define OMAP4430_DPLL_REGM4XEN_WIDTH 0x1 #define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11) /* Used by CM_CLKSEL_DPLL_USB */ #define OMAP4430_DPLL_SD_DIV_SHIFT 24 +#define OMAP4430_DPLL_SD_DIV_WIDTH 0x8 #define OMAP4430_DPLL_SD_DIV_MASK (0xff << 24) /* @@ -746,6 +904,7 @@ * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB */ #define OMAP4430_DPLL_SSC_ACK_SHIFT 13 +#define OMAP4430_DPLL_SSC_ACK_WIDTH 0x1 #define OMAP4430_DPLL_SSC_ACK_MASK (1 << 13) /* @@ -754,6 +913,7 @@ * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB */ #define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT 14 +#define OMAP4430_DPLL_SSC_DOWNSPREAD_WIDTH 0x1 #define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK (1 << 14) /* @@ -762,42 +922,52 @@ * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB */ #define OMAP4430_DPLL_SSC_EN_SHIFT 12 +#define OMAP4430_DPLL_SSC_EN_WIDTH 0x1 #define OMAP4430_DPLL_SSC_EN_MASK (1 << 12) /* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ #define OMAP4430_DSS_DYNDEP_SHIFT 8 +#define OMAP4430_DSS_DYNDEP_WIDTH 0x1 #define OMAP4430_DSS_DYNDEP_MASK (1 << 8) /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP */ #define OMAP4430_DSS_STATDEP_SHIFT 8 +#define OMAP4430_DSS_STATDEP_WIDTH 0x1 #define OMAP4430_DSS_STATDEP_MASK (1 << 8) /* Used by CM_L3_2_DYNAMICDEP */ #define OMAP4430_DUCATI_DYNDEP_SHIFT 0 +#define OMAP4430_DUCATI_DYNDEP_WIDTH 0x1 #define OMAP4430_DUCATI_DYNDEP_MASK (1 << 0) /* Used by CM_MPU_STATICDEP, CM_SDMA_STATICDEP */ #define OMAP4430_DUCATI_STATDEP_SHIFT 0 +#define OMAP4430_DUCATI_STATDEP_WIDTH 0x1 #define OMAP4430_DUCATI_STATDEP_MASK (1 << 0) /* Used by CM_SHADOW_FREQ_CONFIG1 */ #define OMAP4430_FREQ_UPDATE_SHIFT 0 +#define OMAP4430_FREQ_UPDATE_WIDTH 0x1 #define OMAP4430_FREQ_UPDATE_MASK (1 << 0) /* Used by REVISION_CM1, REVISION_CM2 */ #define OMAP4430_FUNC_SHIFT 16 +#define OMAP4430_FUNC_WIDTH 0xc #define OMAP4430_FUNC_MASK (0xfff << 16) /* Used by CM_L3_2_DYNAMICDEP */ #define OMAP4430_GFX_DYNDEP_SHIFT 10 +#define OMAP4430_GFX_DYNDEP_WIDTH 0x1 #define OMAP4430_GFX_DYNDEP_MASK (1 << 10) /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ #define OMAP4430_GFX_STATDEP_SHIFT 10 +#define OMAP4430_GFX_STATDEP_WIDTH 0x1 #define OMAP4430_GFX_STATDEP_MASK (1 << 10) /* Used by CM_SHADOW_FREQ_CONFIG2 */ #define OMAP4430_GPMC_FREQ_UPDATE_SHIFT 0 +#define OMAP4430_GPMC_FREQ_UPDATE_WIDTH 0x1 #define OMAP4430_GPMC_FREQ_UPDATE_MASK (1 << 0) /* @@ -805,6 +975,7 @@ * CM_DIV_M4_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT 0 +#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_WIDTH 0x5 #define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK (0x1f << 0) /* @@ -812,6 +983,7 @@ * CM_DIV_M4_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5 +#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_WIDTH 0x1 #define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK (1 << 5) /* @@ -819,6 +991,7 @@ * CM_DIV_M4_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8 +#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_WIDTH 0x1 #define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK (1 << 8) /* @@ -826,6 +999,7 @@ * CM_DIV_M4_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12 +#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_WIDTH 0x1 #define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK (1 << 12) /* @@ -833,6 +1007,7 @@ * CM_DIV_M5_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT 0 +#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_WIDTH 0x5 #define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK (0x1f << 0) /* @@ -840,6 +1015,7 @@ * CM_DIV_M5_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5 +#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_WIDTH 0x1 #define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK (1 << 5) /* @@ -847,6 +1023,7 @@ * CM_DIV_M5_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8 +#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_WIDTH 0x1 #define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK (1 << 8) /* @@ -854,38 +1031,47 @@ * CM_DIV_M5_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12 +#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_WIDTH 0x1 #define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK (1 << 12) /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT 0 +#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_WIDTH 0x5 #define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK (0x1f << 0) /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5 +#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_WIDTH 0x1 #define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK (1 << 5) /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8 +#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_WIDTH 0x1 #define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK (1 << 8) /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12 +#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_WIDTH 0x1 #define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK (1 << 12) /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT 0 +#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_WIDTH 0x5 #define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK (0x1f << 0) /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT 5 +#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_WIDTH 0x1 #define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK (1 << 5) /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT 8 +#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_WIDTH 0x1 #define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK (1 << 8) /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT 12 +#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_WIDTH 0x1 #define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK (1 << 12) /* @@ -893,53 +1079,48 @@ * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, - * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL, - * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, - * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, - * CM_CM1_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL, - * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, - * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, + * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, + * CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, CM_CAM_FDIF_CLKCTRL, + * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, CM_CM1_PROFILING_CLKCTRL, + * CM_CM2_PROFILING_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, + * CM_D2D_SAD2D_FW_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, - * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, - * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, - * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, - * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, - * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL, - * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, - * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL, - * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL, - * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL, - * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL, - * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL, + * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, + * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL, + * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL, + * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL, + * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, + * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, + * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL, * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL, * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, - * CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, - * CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, - * CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, - * CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, - * CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, - * CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, - * CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL, - * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, - * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, - * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL, + * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, + * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, + * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, + * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, + * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, + * CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, + * CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, + * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL, * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL, * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL, - * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL, - * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, + * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL, - * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, - * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, - * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL + * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, + * CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, + * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL */ #define OMAP4430_IDLEST_SHIFT 16 +#define OMAP4430_IDLEST_WIDTH 0x2 #define OMAP4430_IDLEST_MASK (0x3 << 16) /* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ #define OMAP4430_ISS_DYNDEP_SHIFT 9 +#define OMAP4430_ISS_DYNDEP_WIDTH 0x1 #define OMAP4430_ISS_DYNDEP_MASK (1 << 9) /* @@ -947,10 +1128,12 @@ * CM_TESLA_STATICDEP */ #define OMAP4430_ISS_STATDEP_SHIFT 9 +#define OMAP4430_ISS_STATDEP_WIDTH 0x1 #define OMAP4430_ISS_STATDEP_MASK (1 << 9) /* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ #define OMAP4430_IVAHD_DYNDEP_SHIFT 2 +#define OMAP4430_IVAHD_DYNDEP_WIDTH 0x1 #define OMAP4430_IVAHD_DYNDEP_MASK (1 << 2) /* @@ -959,10 +1142,12 @@ * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_IVAHD_STATDEP_SHIFT 2 +#define OMAP4430_IVAHD_STATDEP_WIDTH 0x1 #define OMAP4430_IVAHD_STATDEP_MASK (1 << 2) /* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ #define OMAP4430_L3INIT_DYNDEP_SHIFT 7 +#define OMAP4430_L3INIT_DYNDEP_WIDTH 0x1 #define OMAP4430_L3INIT_DYNDEP_MASK (1 << 7) /* @@ -970,6 +1155,7 @@ * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_L3INIT_STATDEP_SHIFT 7 +#define OMAP4430_L3INIT_STATDEP_WIDTH 0x1 #define OMAP4430_L3INIT_STATDEP_MASK (1 << 7) /* @@ -977,6 +1163,7 @@ * CM_L4CFG_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ #define OMAP4430_L3_1_DYNDEP_SHIFT 5 +#define OMAP4430_L3_1_DYNDEP_WIDTH 0x1 #define OMAP4430_L3_1_DYNDEP_MASK (1 << 5) /* @@ -986,6 +1173,7 @@ * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_L3_1_STATDEP_SHIFT 5 +#define OMAP4430_L3_1_STATDEP_WIDTH 0x1 #define OMAP4430_L3_1_STATDEP_MASK (1 << 5) /* @@ -995,6 +1183,7 @@ * CM_L4SEC_DYNAMICDEP, CM_SDMA_DYNAMICDEP */ #define OMAP4430_L3_2_DYNDEP_SHIFT 6 +#define OMAP4430_L3_2_DYNDEP_WIDTH 0x1 #define OMAP4430_L3_2_DYNDEP_MASK (1 << 6) /* @@ -1004,10 +1193,12 @@ * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_L3_2_STATDEP_SHIFT 6 +#define OMAP4430_L3_2_STATDEP_WIDTH 0x1 #define OMAP4430_L3_2_STATDEP_MASK (1 << 6) /* Used by CM_L3_1_DYNAMICDEP */ #define OMAP4430_L4CFG_DYNDEP_SHIFT 12 +#define OMAP4430_L4CFG_DYNDEP_WIDTH 0x1 #define OMAP4430_L4CFG_DYNDEP_MASK (1 << 12) /* @@ -1015,10 +1206,12 @@ * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_L4CFG_STATDEP_SHIFT 12 +#define OMAP4430_L4CFG_STATDEP_WIDTH 0x1 #define OMAP4430_L4CFG_STATDEP_MASK (1 << 12) /* Used by CM_L3_2_DYNAMICDEP */ #define OMAP4430_L4PER_DYNDEP_SHIFT 13 +#define OMAP4430_L4PER_DYNDEP_WIDTH 0x1 #define OMAP4430_L4PER_DYNDEP_MASK (1 << 13) /* @@ -1026,10 +1219,12 @@ * CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_L4PER_STATDEP_SHIFT 13 +#define OMAP4430_L4PER_STATDEP_WIDTH 0x1 #define OMAP4430_L4PER_STATDEP_MASK (1 << 13) /* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ #define OMAP4430_L4SEC_DYNDEP_SHIFT 14 +#define OMAP4430_L4SEC_DYNDEP_WIDTH 0x1 #define OMAP4430_L4SEC_DYNDEP_MASK (1 << 14) /* @@ -1037,10 +1232,12 @@ * CM_SDMA_STATICDEP */ #define OMAP4430_L4SEC_STATDEP_SHIFT 14 +#define OMAP4430_L4SEC_STATDEP_WIDTH 0x1 #define OMAP4430_L4SEC_STATDEP_MASK (1 << 14) /* Used by CM_L4CFG_DYNAMICDEP */ #define OMAP4430_L4WKUP_DYNDEP_SHIFT 15 +#define OMAP4430_L4WKUP_DYNDEP_WIDTH 0x1 #define OMAP4430_L4WKUP_DYNDEP_MASK (1 << 15) /* @@ -1048,6 +1245,7 @@ * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_L4WKUP_STATDEP_SHIFT 15 +#define OMAP4430_L4WKUP_STATDEP_WIDTH 0x1 #define OMAP4430_L4WKUP_STATDEP_MASK (1 << 15) /* @@ -1055,6 +1253,7 @@ * CM_MPU_DYNAMICDEP */ #define OMAP4430_MEMIF_DYNDEP_SHIFT 4 +#define OMAP4430_MEMIF_DYNDEP_WIDTH 0x1 #define OMAP4430_MEMIF_DYNDEP_MASK (1 << 4) /* @@ -1064,6 +1263,7 @@ * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_MEMIF_STATDEP_SHIFT 4 +#define OMAP4430_MEMIF_STATDEP_WIDTH 0x1 #define OMAP4430_MEMIF_STATDEP_MASK (1 << 4) /* @@ -1073,6 +1273,7 @@ * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB */ #define OMAP4430_MODFREQDIV_EXPONENT_SHIFT 8 +#define OMAP4430_MODFREQDIV_EXPONENT_WIDTH 0x3 #define OMAP4430_MODFREQDIV_EXPONENT_MASK (0x7 << 8) /* @@ -1082,6 +1283,7 @@ * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB */ #define OMAP4430_MODFREQDIV_MANTISSA_SHIFT 0 +#define OMAP4430_MODFREQDIV_MANTISSA_WIDTH 0x7 #define OMAP4430_MODFREQDIV_MANTISSA_MASK (0x7f << 0) /* @@ -1089,69 +1291,68 @@ * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, - * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL, - * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, - * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, - * CM_CM1_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL, - * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, - * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, + * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, + * CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, CM_CAM_FDIF_CLKCTRL, + * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, CM_CM1_PROFILING_CLKCTRL, + * CM_CM2_PROFILING_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, + * CM_D2D_SAD2D_FW_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, - * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, - * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, - * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, - * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, - * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL, - * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, - * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL, - * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL, - * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL, - * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL, - * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL, + * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, + * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL, + * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL, + * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL, + * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, + * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, + * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL, * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL, * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, - * CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, - * CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, - * CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, - * CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, - * CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, - * CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, - * CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL, - * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, - * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, - * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL, + * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, + * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, + * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, + * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, + * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, + * CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, + * CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, + * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL, * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL, * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL, - * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL, - * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, + * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL, - * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, - * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, - * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL + * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, + * CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, + * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL */ #define OMAP4430_MODULEMODE_SHIFT 0 +#define OMAP4430_MODULEMODE_WIDTH 0x2 #define OMAP4430_MODULEMODE_MASK (0x3 << 0) /* Used by CM_L4CFG_DYNAMICDEP */ #define OMAP4460_MPU_DYNDEP_SHIFT 19 +#define OMAP4460_MPU_DYNDEP_WIDTH 0x1 #define OMAP4460_MPU_DYNDEP_MASK (1 << 19) /* Used by CM_DSS_DSS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT 9 +#define OMAP4430_OPTFCLKEN_48MHZ_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK (1 << 9) /* Used by CM_WKUP_BANDGAP_CLKCTRL */ #define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT 8 +#define OMAP4430_OPTFCLKEN_BGAP_32K_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_BGAP_32K_MASK (1 << 8) /* Used by CM_ALWON_USBPHY_CLKCTRL */ #define OMAP4430_OPTFCLKEN_CLK32K_SHIFT 8 +#define OMAP4430_OPTFCLKEN_CLK32K_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_CLK32K_MASK (1 << 8) /* Used by CM_CAM_ISS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT 8 +#define OMAP4430_OPTFCLKEN_CTRLCLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_CTRLCLK_MASK (1 << 8) /* @@ -1160,126 +1361,157 @@ * CM_WKUP_GPIO1_CLKCTRL */ #define OMAP4430_OPTFCLKEN_DBCLK_SHIFT 8 +#define OMAP4430_OPTFCLKEN_DBCLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_DBCLK_MASK (1 << 8) /* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */ #define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT 8 +#define OMAP4430_OPTFCLKEN_DLL_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_DLL_CLK_MASK (1 << 8) /* Used by CM_DSS_DSS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT 8 +#define OMAP4430_OPTFCLKEN_DSSCLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_DSSCLK_MASK (1 << 8) /* Used by CM_WKUP_USIM_CLKCTRL */ #define OMAP4430_OPTFCLKEN_FCLK_SHIFT 8 +#define OMAP4430_OPTFCLKEN_FCLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_FCLK_MASK (1 << 8) /* Used by CM1_ABE_SLIMBUS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_FCLK0_SHIFT 8 +#define OMAP4430_OPTFCLKEN_FCLK0_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_FCLK0_MASK (1 << 8) /* Used by CM1_ABE_SLIMBUS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_FCLK1_SHIFT 9 +#define OMAP4430_OPTFCLKEN_FCLK1_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_FCLK1_MASK (1 << 9) /* Used by CM1_ABE_SLIMBUS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_FCLK2_SHIFT 10 +#define OMAP4430_OPTFCLKEN_FCLK2_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_FCLK2_MASK (1 << 10) /* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT 15 +#define OMAP4430_OPTFCLKEN_FUNC48MCLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK (1 << 15) /* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT 13 +#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK (1 << 13) /* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT 14 +#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK (1 << 14) /* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT 11 +#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK (1 << 11) /* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT 12 +#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK (1 << 12) /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ #define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT 8 +#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK (1 << 8) /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ #define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT 9 +#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK (1 << 9) /* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */ #define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT 8 +#define OMAP4430_OPTFCLKEN_PHY_48M_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_PHY_48M_MASK (1 << 8) /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT 10 +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK (1 << 10) /* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT 11 +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK (1 << 11) /* Used by CM_DSS_DSS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT 10 +#define OMAP4430_OPTFCLKEN_SYS_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_SYS_CLK_MASK (1 << 10) /* Used by CM_WKUP_BANDGAP_CLKCTRL */ #define OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT 8 +#define OMAP4460_OPTFCLKEN_TS_FCLK_WIDTH 0x1 #define OMAP4460_OPTFCLKEN_TS_FCLK_MASK (1 << 8) /* Used by CM_DSS_DSS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT 11 +#define OMAP4430_OPTFCLKEN_TV_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_TV_CLK_MASK (1 << 11) /* Used by CM_L3INIT_UNIPRO1_CLKCTRL */ #define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT 8 +#define OMAP4430_OPTFCLKEN_TXPHYCLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK (1 << 8) /* Used by CM_L3INIT_USB_TLL_CLKCTRL */ #define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT 8 +#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK (1 << 8) /* Used by CM_L3INIT_USB_TLL_CLKCTRL */ #define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT 9 +#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK (1 << 9) /* Used by CM_L3INIT_USB_TLL_CLKCTRL */ #define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT 10 +#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK (1 << 10) /* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT 8 +#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK (1 << 8) /* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT 9 +#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK (1 << 9) /* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT 10 +#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK (1 << 10) /* Used by CM_L3INIT_USB_OTG_CLKCTRL */ #define OMAP4430_OPTFCLKEN_XCLK_SHIFT 8 +#define OMAP4430_OPTFCLKEN_XCLK_WIDTH 0x1 #define OMAP4430_OPTFCLKEN_XCLK_MASK (1 << 8) /* Used by CM_EMU_OVERRIDE_DPLL_CORE */ #define OMAP4430_OVERRIDE_ENABLE_SHIFT 19 +#define OMAP4430_OVERRIDE_ENABLE_WIDTH 0x1 #define OMAP4430_OVERRIDE_ENABLE_MASK (1 << 19) /* Used by CM_CLKSEL_ABE */ #define OMAP4430_PAD_CLKS_GATE_SHIFT 8 +#define OMAP4430_PAD_CLKS_GATE_WIDTH 0x1 #define OMAP4430_PAD_CLKS_GATE_MASK (1 << 8) /* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */ #define OMAP4430_PERF_CURRENT_SHIFT 0 +#define OMAP4430_PERF_CURRENT_WIDTH 0x8 #define OMAP4430_PERF_CURRENT_MASK (0xff << 0) /* @@ -1288,74 +1520,85 @@ * CM_IVA_DVFS_PERF_TESLA */ #define OMAP4430_PERF_REQ_SHIFT 0 +#define OMAP4430_PERF_REQ_WIDTH 0x8 #define OMAP4430_PERF_REQ_MASK (0xff << 0) /* Used by CM_RESTORE_ST */ #define OMAP4430_PHASE1_COMPLETED_SHIFT 0 +#define OMAP4430_PHASE1_COMPLETED_WIDTH 0x1 #define OMAP4430_PHASE1_COMPLETED_MASK (1 << 0) /* Used by CM_RESTORE_ST */ #define OMAP4430_PHASE2A_COMPLETED_SHIFT 1 +#define OMAP4430_PHASE2A_COMPLETED_WIDTH 0x1 #define OMAP4430_PHASE2A_COMPLETED_MASK (1 << 1) /* Used by CM_RESTORE_ST */ #define OMAP4430_PHASE2B_COMPLETED_SHIFT 2 +#define OMAP4430_PHASE2B_COMPLETED_WIDTH 0x1 #define OMAP4430_PHASE2B_COMPLETED_MASK (1 << 2) /* Used by CM_EMU_DEBUGSS_CLKCTRL */ #define OMAP4430_PMD_STM_MUX_CTRL_SHIFT 20 +#define OMAP4430_PMD_STM_MUX_CTRL_WIDTH 0x2 #define OMAP4430_PMD_STM_MUX_CTRL_MASK (0x3 << 20) /* Used by CM_EMU_DEBUGSS_CLKCTRL */ #define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT 22 +#define OMAP4430_PMD_TRACE_MUX_CTRL_WIDTH 0x2 #define OMAP4430_PMD_TRACE_MUX_CTRL_MASK (0x3 << 22) /* Used by CM_DYN_DEP_PRESCAL */ #define OMAP4430_PRESCAL_SHIFT 0 +#define OMAP4430_PRESCAL_WIDTH 0x6 #define OMAP4430_PRESCAL_MASK (0x3f << 0) /* Used by REVISION_CM1, REVISION_CM2 */ #define OMAP4430_R_RTL_SHIFT 11 +#define OMAP4430_R_RTL_WIDTH 0x5 #define OMAP4430_R_RTL_MASK (0x1f << 11) /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL */ #define OMAP4430_SAR_MODE_SHIFT 4 +#define OMAP4430_SAR_MODE_WIDTH 0x1 #define OMAP4430_SAR_MODE_MASK (1 << 4) /* Used by CM_SCALE_FCLK */ #define OMAP4430_SCALE_FCLK_SHIFT 0 +#define OMAP4430_SCALE_FCLK_WIDTH 0x1 #define OMAP4430_SCALE_FCLK_MASK (1 << 0) /* Used by REVISION_CM1, REVISION_CM2 */ #define OMAP4430_SCHEME_SHIFT 30 +#define OMAP4430_SCHEME_WIDTH 0x2 #define OMAP4430_SCHEME_MASK (0x3 << 30) /* Used by CM_L4CFG_DYNAMICDEP */ #define OMAP4430_SDMA_DYNDEP_SHIFT 11 +#define OMAP4430_SDMA_DYNDEP_WIDTH 0x1 #define OMAP4430_SDMA_DYNDEP_MASK (1 << 11) /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ #define OMAP4430_SDMA_STATDEP_SHIFT 11 +#define OMAP4430_SDMA_STATDEP_WIDTH 0x1 #define OMAP4430_SDMA_STATDEP_MASK (1 << 11) /* Used by CM_CLKSEL_ABE */ #define OMAP4430_SLIMBUS_CLK_GATE_SHIFT 10 +#define OMAP4430_SLIMBUS_CLK_GATE_WIDTH 0x1 #define OMAP4430_SLIMBUS_CLK_GATE_MASK (1 << 10) /* * Used by CM1_ABE_AESS_CLKCTRL, CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, - * CM_D2D_SAD2D_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, - * CM_DUCATI_DUCATI_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, - * CM_IVAHD_IVAHD_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, + * CM_D2D_SAD2D_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, + * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, - * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, - * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL, - * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, - * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, - * CM_TESLA_TESLA_CLKCTRL + * CM_L3INIT_USB_OTG_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL, + * CM_SDMA_SDMA_CLKCTRL, CM_TESLA_TESLA_CLKCTRL */ #define OMAP4430_STBYST_SHIFT 18 +#define OMAP4430_STBYST_WIDTH 0x1 #define OMAP4430_STBYST_MASK (1 << 18) /* @@ -1364,10 +1607,12 @@ * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB */ #define OMAP4430_ST_DPLL_CLK_SHIFT 0 +#define OMAP4430_ST_DPLL_CLK_WIDTH 0x1 #define OMAP4430_ST_DPLL_CLK_MASK (1 << 0) /* Used by CM_CLKDCOLDO_DPLL_USB */ #define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT 9 +#define OMAP4430_ST_DPLL_CLKDCOLDO_WIDTH 0x1 #define OMAP4430_ST_DPLL_CLKDCOLDO_MASK (1 << 9) /* @@ -1375,14 +1620,17 @@ * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB */ #define OMAP4430_ST_DPLL_CLKOUT_SHIFT 9 +#define OMAP4430_ST_DPLL_CLKOUT_WIDTH 0x1 #define OMAP4430_ST_DPLL_CLKOUT_MASK (1 << 9) /* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */ #define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT 9 +#define OMAP4430_ST_DPLL_CLKOUTHIF_WIDTH 0x1 #define OMAP4430_ST_DPLL_CLKOUTHIF_MASK (1 << 9) /* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */ #define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT 11 +#define OMAP4430_ST_DPLL_CLKOUTX2_WIDTH 0x1 #define OMAP4430_ST_DPLL_CLKOUTX2_MASK (1 << 11) /* @@ -1390,6 +1638,7 @@ * CM_DIV_M4_DPLL_PER */ #define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT 9 +#define OMAP4430_ST_HSDIVIDER_CLKOUT1_WIDTH 0x1 #define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK (1 << 9) /* @@ -1397,14 +1646,17 @@ * CM_DIV_M5_DPLL_PER */ #define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT 9 +#define OMAP4430_ST_HSDIVIDER_CLKOUT2_WIDTH 0x1 #define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK (1 << 9) /* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT 9 +#define OMAP4430_ST_HSDIVIDER_CLKOUT3_WIDTH 0x1 #define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK (1 << 9) /* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */ #define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT 9 +#define OMAP4430_ST_HSDIVIDER_CLKOUT4_WIDTH 0x1 #define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK (1 << 9) /* @@ -1413,18 +1665,22 @@ * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB */ #define OMAP4430_ST_MN_BYPASS_SHIFT 8 +#define OMAP4430_ST_MN_BYPASS_WIDTH 0x1 #define OMAP4430_ST_MN_BYPASS_MASK (1 << 8) /* Used by CM_SYS_CLKSEL */ #define OMAP4430_SYS_CLKSEL_SHIFT 0 +#define OMAP4430_SYS_CLKSEL_WIDTH 0x3 #define OMAP4430_SYS_CLKSEL_MASK (0x7 << 0) /* Used by CM_L4CFG_DYNAMICDEP */ #define OMAP4430_TESLA_DYNDEP_SHIFT 1 +#define OMAP4430_TESLA_DYNDEP_WIDTH 0x1 #define OMAP4430_TESLA_DYNDEP_MASK (1 << 1) /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ #define OMAP4430_TESLA_STATDEP_SHIFT 1 +#define OMAP4430_TESLA_STATDEP_WIDTH 0x1 #define OMAP4430_TESLA_STATDEP_MASK (1 << 1) /* @@ -1433,13 +1689,16 @@ * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ #define OMAP4430_WINDOWSIZE_SHIFT 24 +#define OMAP4430_WINDOWSIZE_WIDTH 0x4 #define OMAP4430_WINDOWSIZE_MASK (0xf << 24) /* Used by REVISION_CM1, REVISION_CM2 */ #define OMAP4430_X_MAJOR_SHIFT 8 +#define OMAP4430_X_MAJOR_WIDTH 0x3 #define OMAP4430_X_MAJOR_MASK (0x7 << 8) /* Used by REVISION_CM1, REVISION_CM2 */ #define OMAP4430_Y_MINOR_SHIFT 0 +#define OMAP4430_Y_MINOR_WIDTH 0x6 #define OMAP4430_Y_MINOR_MASK (0x3f << 0) #endif -- cgit v0.10.2 From a86c0b9867940bd0ba78f109686079b4051a463d Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Wed, 19 Sep 2012 18:05:15 -0600 Subject: ARM: AM33XX: cm: Add bit-field width values The new common clk framework includes basic definitions for mux and divider clocks. These definitions depend on shift and width values instead of the pre-computed masks that the OMAP/AM33XX clk framework has traditionally used when accessing the register to control the mux or divisor. To ease this transition the masks are left intact and the width field is simply added alongside the shift and mask data. Signed-off-by: Vaibhav Hiremath Cc: Rajendra Nayak Cc: Paul Walmsley Cc: Mike Turquette Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h index 532027e..adf7bb7 100644 --- a/arch/arm/mach-omap2/cm-regbits-33xx.h +++ b/arch/arm/mach-omap2/cm-regbits-33xx.h @@ -25,263 +25,328 @@ * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER */ #define AM33XX_AUTO_DPLL_MODE_SHIFT 0 +#define AM33XX_AUTO_DPLL_MODE_WIDTH 3 #define AM33XX_AUTO_DPLL_MODE_MASK (0x7 << 0) /* Used by CM_WKUP_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT 14 +#define AM33XX_CLKACTIVITY_ADC_FCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_ADC_FCLK_MASK (1 << 16) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT 11 +#define AM33XX_CLKACTIVITY_CAN_CLK_WIDTH 1 #define AM33XX_CLKACTIVITY_CAN_CLK_MASK (1 << 11) /* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK (1 << 4) /* Used by CM_PER_CPSW_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK (1 << 4) /* Used by CM_PER_L4HS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK (1 << 4) /* Used by CM_PER_L4HS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK (1 << 5) /* Used by CM_PER_L4HS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT 6 +#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK (1 << 6) /* Used by CM_PER_L3_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT 6 +#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK (1 << 6) /* Used by CM_CEFUSE_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_WIDTH 1 #define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9) /* Used by CM_L3_AON_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_DBGSYSCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK (1 << 2) /* Used by CM_L3_AON_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT 4 +#define AM33XX_CLKACTIVITY_DEBUG_CLKA_WIDTH 1 #define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK (1 << 4) /* Used by CM_PER_L3_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_EMIF_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK (1 << 2) /* Used by CM_GFX_L3_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_GFX_FCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_GFX_FCLK_MASK (1 << 9) /* Used by CM_GFX_L3_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK (1 << 8) /* Used by CM_WKUP_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK (1 << 8) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT 19 +#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK (1 << 19) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT 20 +#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK (1 << 20) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT 21 +#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK (1 << 21) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT 22 +#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK (1 << 22) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT 26 +#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK (1 << 26) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT 18 +#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK (1 << 18) /* Used by CM_WKUP_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT 11 +#define AM33XX_CLKACTIVITY_I2C0_GFCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK (1 << 11) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT 24 +#define AM33XX_CLKACTIVITY_I2C_FCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_I2C_FCLK_MASK (1 << 24) /* Used by CM_PER_PRUSS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK (1 << 5) /* Used by CM_PER_PRUSS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK (1 << 4) /* Used by CM_PER_PRUSS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT 6 +#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK (1 << 6) /* Used by CM_PER_L3S_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_L3S_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_L3S_GCLK_MASK (1 << 3) /* Used by CM_L3_AON_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_L3_AON_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK (1 << 3) /* Used by CM_PER_L3_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_L3_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_L3_GCLK_MASK (1 << 4) /* Used by CM_PER_L4FW_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4FW_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK (1 << 8) /* Used by CM_PER_L4HS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_L4HS_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK (1 << 3) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4LS_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK (1 << 8) /* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */ #define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK (1 << 8) /* Used by CM_CEFUSE_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_WIDTH 1 #define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK (1 << 8) /* Used by CM_RTC_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT 8 +#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK (1 << 8) /* Used by CM_L4_WKUP_AON_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK (1 << 2) /* Used by CM_WKUP_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK (1 << 2) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT 17 +#define AM33XX_CLKACTIVITY_LCDC_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK (1 << 17) /* Used by CM_PER_LCDC_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK (1 << 4) /* Used by CM_PER_LCDC_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK (1 << 5) /* Used by CM_PER_L3_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT 7 +#define AM33XX_CLKACTIVITY_MCASP_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK (1 << 7) /* Used by CM_PER_L3_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_MMC_FCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_MMC_FCLK_MASK (1 << 3) /* Used by CM_MPU_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT 2 +#define AM33XX_CLKACTIVITY_MPU_CLK_WIDTH 1 #define AM33XX_CLKACTIVITY_MPU_CLK_MASK (1 << 2) /* Used by CM_PER_OCPWP_L3_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK (1 << 4) /* Used by CM_PER_OCPWP_L3_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT 5 +#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK (1 << 5) /* Used by CM_RTC_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_RTC_32KCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK (1 << 9) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT 25 +#define AM33XX_CLKACTIVITY_SPI_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_SPI_GCLK_MASK (1 << 25) /* Used by CM_WKUP_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT 3 +#define AM33XX_CLKACTIVITY_SR_SYSCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK (1 << 3) /* Used by CM_WKUP_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT 10 +#define AM33XX_CLKACTIVITY_TIMER0_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK (1 << 10) /* Used by CM_WKUP_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT 13 +#define AM33XX_CLKACTIVITY_TIMER1_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK (1 << 13) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT 14 +#define AM33XX_CLKACTIVITY_TIMER2_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK (1 << 14) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT 15 +#define AM33XX_CLKACTIVITY_TIMER3_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK (1 << 15) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT 16 +#define AM33XX_CLKACTIVITY_TIMER4_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK (1 << 16) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT 27 +#define AM33XX_CLKACTIVITY_TIMER5_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK (1 << 27) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT 28 +#define AM33XX_CLKACTIVITY_TIMER6_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK (1 << 28) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT 13 +#define AM33XX_CLKACTIVITY_TIMER7_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK (1 << 13) /* Used by CM_WKUP_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT 12 +#define AM33XX_CLKACTIVITY_UART0_GFCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK (1 << 12) /* Used by CM_PER_L4LS_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT 10 +#define AM33XX_CLKACTIVITY_UART_GFCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_UART_GFCLK_MASK (1 << 10) /* Used by CM_WKUP_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT 9 +#define AM33XX_CLKACTIVITY_WDT0_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK (1 << 9) /* Used by CM_WKUP_CLKSTCTRL */ #define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT 4 +#define AM33XX_CLKACTIVITY_WDT1_GCLK_WIDTH 1 #define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK (1 << 4) /* Used by CLKSEL_GFX_FCLK */ #define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT 0 +#define AM33XX_CLKDIV_SEL_GFX_FCLK_WIDTH 1 #define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK (1 << 0) /* Used by CM_CLKOUT_CTRL */ #define AM33XX_CLKOUT2DIV_SHIFT 3 -#define AM33XX_CLKOUT2DIV_MASK (0x05 << 3) +#define AM33XX_CLKOUT2DIV_WIDTH 3 +#define AM33XX_CLKOUT2DIV_MASK (0x7 << 3) /* Used by CM_CLKOUT_CTRL */ #define AM33XX_CLKOUT2EN_SHIFT 7 +#define AM33XX_CLKOUT2EN_WIDTH 1 #define AM33XX_CLKOUT2EN_MASK (1 << 7) /* Used by CM_CLKOUT_CTRL */ #define AM33XX_CLKOUT2SOURCE_SHIFT 0 -#define AM33XX_CLKOUT2SOURCE_MASK (0x02 << 0) +#define AM33XX_CLKOUT2SOURCE_WIDTH 3 +#define AM33XX_CLKOUT2SOURCE_MASK (0x7 << 0) /* * Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK, @@ -289,6 +354,7 @@ * CLKSEL_TIMER7_CLK */ #define AM33XX_CLKSEL_SHIFT 0 +#define AM33XX_CLKSEL_WIDTH 1 #define AM33XX_CLKSEL_MASK (0x01 << 0) /* @@ -296,17 +362,21 @@ * CM_CPTS_RFT_CLKSEL */ #define AM33XX_CLKSEL_0_0_SHIFT 0 +#define AM33XX_CLKSEL_0_0_WIDTH 1 #define AM33XX_CLKSEL_0_0_MASK (1 << 0) #define AM33XX_CLKSEL_0_1_SHIFT 0 +#define AM33XX_CLKSEL_0_1_WIDTH 2 #define AM33XX_CLKSEL_0_1_MASK (3 << 0) /* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */ #define AM33XX_CLKSEL_0_2_SHIFT 0 +#define AM33XX_CLKSEL_0_2_WIDTH 3 #define AM33XX_CLKSEL_0_2_MASK (7 << 0) /* Used by CLKSEL_GFX_FCLK */ #define AM33XX_CLKSEL_GFX_FCLK_SHIFT 1 +#define AM33XX_CLKSEL_GFX_FCLK_WIDTH 1 #define AM33XX_CLKSEL_GFX_FCLK_MASK (1 << 1) /* @@ -318,6 +388,7 @@ * CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL */ #define AM33XX_CLKTRCTRL_SHIFT 0 +#define AM33XX_CLKTRCTRL_WIDTH 2 #define AM33XX_CLKTRCTRL_MASK (0x3 << 0) /* @@ -326,34 +397,42 @@ * CM_SSC_DELTAMSTEP_DPLL_PER */ #define AM33XX_DELTAMSTEP_SHIFT 0 -#define AM33XX_DELTAMSTEP_MASK (0x19 << 0) +#define AM33XX_DELTAMSTEP_WIDTH 20 +#define AM33XX_DELTAMSTEP_MASK (0xfffff << 0) /* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */ #define AM33XX_DPLL_BYP_CLKSEL_SHIFT 23 +#define AM33XX_DPLL_BYP_CLKSEL_WIDTH 1 #define AM33XX_DPLL_BYP_CLKSEL_MASK (1 << 23) /* Used by CM_CLKDCOLDO_DPLL_PER */ #define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8 +#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_WIDTH 1 #define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK (1 << 8) /* Used by CM_CLKDCOLDO_DPLL_PER */ #define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT 12 +#define AM33XX_DPLL_CLKDCOLDO_PWDN_WIDTH 1 #define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK (1 << 12) /* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */ #define AM33XX_DPLL_CLKOUT_DIV_SHIFT 0 +#define AM33XX_DPLL_CLKOUT_DIV_WIDTH 5 #define AM33XX_DPLL_CLKOUT_DIV_MASK (0x1f << 0) /* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */ #define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT 0 -#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK (0x06 << 0) +#define AM33XX_DPLL_CLKOUT_DIV_0_6_WIDTH 7 +#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK (0x7f << 0) /* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */ #define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT 5 +#define AM33XX_DPLL_CLKOUT_DIVCHACK_WIDTH 1 #define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK (1 << 5) /* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */ #define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT 7 +#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_WIDTH 1 #define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK (1 << 7) /* @@ -361,6 +440,7 @@ * CM_DIV_M2_DPLL_PER */ #define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT 8 +#define AM33XX_DPLL_CLKOUT_GATE_CTRL_WIDTH 1 #define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8) /* @@ -368,19 +448,22 @@ * CM_CLKSEL_DPLL_MPU */ #define AM33XX_DPLL_DIV_SHIFT 0 +#define AM33XX_DPLL_DIV_WIDTH 7 #define AM33XX_DPLL_DIV_MASK (0x7f << 0) #define AM33XX_DPLL_PER_DIV_MASK (0xff << 0) /* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */ #define AM33XX_DPLL_DIV_0_7_SHIFT 0 -#define AM33XX_DPLL_DIV_0_7_MASK (0x07 << 0) +#define AM33XX_DPLL_DIV_0_7_WIDTH 8 +#define AM33XX_DPLL_DIV_0_7_MASK (0xff << 0) /* * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, * CM_CLKMODE_DPLL_MPU */ #define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT 8 +#define AM33XX_DPLL_DRIFTGUARD_EN_WIDTH 1 #define AM33XX_DPLL_DRIFTGUARD_EN_MASK (1 << 8) /* @@ -388,6 +471,7 @@ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER */ #define AM33XX_DPLL_EN_SHIFT 0 +#define AM33XX_DPLL_EN_WIDTH 3 #define AM33XX_DPLL_EN_MASK (0x7 << 0) /* @@ -395,6 +479,7 @@ * CM_CLKMODE_DPLL_MPU */ #define AM33XX_DPLL_LPMODE_EN_SHIFT 10 +#define AM33XX_DPLL_LPMODE_EN_WIDTH 1 #define AM33XX_DPLL_LPMODE_EN_MASK (1 << 10) /* @@ -402,10 +487,12 @@ * CM_CLKSEL_DPLL_MPU */ #define AM33XX_DPLL_MULT_SHIFT 8 +#define AM33XX_DPLL_MULT_WIDTH 11 #define AM33XX_DPLL_MULT_MASK (0x7ff << 8) /* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */ #define AM33XX_DPLL_MULT_PERIPH_SHIFT 8 +#define AM33XX_DPLL_MULT_PERIPH_WIDTH 12 #define AM33XX_DPLL_MULT_PERIPH_MASK (0xfff << 8) /* @@ -413,17 +500,20 @@ * CM_CLKMODE_DPLL_MPU */ #define AM33XX_DPLL_REGM4XEN_SHIFT 11 +#define AM33XX_DPLL_REGM4XEN_WIDTH 1 #define AM33XX_DPLL_REGM4XEN_MASK (1 << 11) /* Used by CM_CLKSEL_DPLL_PERIPH */ #define AM33XX_DPLL_SD_DIV_SHIFT 24 -#define AM33XX_DPLL_SD_DIV_MASK (24, 31) +#define AM33XX_DPLL_SD_DIV_WIDTH 8 +#define AM33XX_DPLL_SD_DIV_MASK (0xff << 24) /* * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP, * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER */ #define AM33XX_DPLL_SSC_ACK_SHIFT 13 +#define AM33XX_DPLL_SSC_ACK_WIDTH 1 #define AM33XX_DPLL_SSC_ACK_MASK (1 << 13) /* @@ -431,6 +521,7 @@ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER */ #define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT 14 +#define AM33XX_DPLL_SSC_DOWNSPREAD_WIDTH 1 #define AM33XX_DPLL_SSC_DOWNSPREAD_MASK (1 << 14) /* @@ -438,54 +529,67 @@ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER */ #define AM33XX_DPLL_SSC_EN_SHIFT 12 +#define AM33XX_DPLL_SSC_EN_WIDTH 1 #define AM33XX_DPLL_SSC_EN_MASK (1 << 12) /* Used by CM_DIV_M4_DPLL_CORE */ #define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT 0 +#define AM33XX_HSDIVIDER_CLKOUT1_DIV_WIDTH 5 #define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK (0x1f << 0) /* Used by CM_DIV_M4_DPLL_CORE */ #define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5 +#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_WIDTH 1 #define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK (1 << 5) /* Used by CM_DIV_M4_DPLL_CORE */ #define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8 +#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_WIDTH 1 #define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK (1 << 8) /* Used by CM_DIV_M4_DPLL_CORE */ #define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12 +#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_WIDTH 1 #define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK (1 << 12) /* Used by CM_DIV_M5_DPLL_CORE */ #define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT 0 +#define AM33XX_HSDIVIDER_CLKOUT2_DIV_WIDTH 5 #define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK (0x1f << 0) /* Used by CM_DIV_M5_DPLL_CORE */ #define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5 +#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_WIDTH 1 #define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK (1 << 5) /* Used by CM_DIV_M5_DPLL_CORE */ #define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8 +#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_WIDTH 1 #define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK (1 << 8) /* Used by CM_DIV_M5_DPLL_CORE */ #define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12 +#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_WIDTH 1 #define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK (1 << 12) /* Used by CM_DIV_M6_DPLL_CORE */ #define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT 0 -#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK (0x04 << 0) +#define AM33XX_HSDIVIDER_CLKOUT3_DIV_WIDTH 5 +#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK (0x1f << 0) /* Used by CM_DIV_M6_DPLL_CORE */ #define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5 +#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_WIDTH 1 #define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK (1 << 5) /* Used by CM_DIV_M6_DPLL_CORE */ #define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8 +#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_WIDTH 1 #define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK (1 << 8) /* Used by CM_DIV_M6_DPLL_CORE */ #define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12 +#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_WIDTH 1 #define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK (1 << 12) /* @@ -522,11 +626,12 @@ * CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL */ #define AM33XX_IDLEST_SHIFT 16 +#define AM33XX_IDLEST_WIDTH 2 #define AM33XX_IDLEST_MASK (0x3 << 16) -#define AM33XX_IDLEST_VAL 0x3 /* Used by CM_MAC_CLKSEL */ #define AM33XX_MII_CLK_SEL_SHIFT 2 +#define AM33XX_MII_CLK_SEL_WIDTH 1 #define AM33XX_MII_CLK_SEL_MASK (1 << 2) /* @@ -535,7 +640,8 @@ * CM_SSC_MODFREQDIV_DPLL_PER */ #define AM33XX_MODFREQDIV_EXPONENT_SHIFT 8 -#define AM33XX_MODFREQDIV_EXPONENT_MASK (0x10 << 8) +#define AM33XX_MODFREQDIV_EXPONENT_WIDTH 3 +#define AM33XX_MODFREQDIV_EXPONENT_MASK (0x7 << 8) /* * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR, @@ -543,7 +649,8 @@ * CM_SSC_MODFREQDIV_DPLL_PER */ #define AM33XX_MODFREQDIV_MANTISSA_SHIFT 0 -#define AM33XX_MODFREQDIV_MANTISSA_MASK (0x06 << 0) +#define AM33XX_MODFREQDIV_MANTISSA_WIDTH 7 +#define AM33XX_MODFREQDIV_MANTISSA_MASK (0x7f << 0) /* * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL, @@ -580,42 +687,52 @@ * CM_CEFUSE_CEFUSE_CLKCTRL */ #define AM33XX_MODULEMODE_SHIFT 0 +#define AM33XX_MODULEMODE_WIDTH 2 #define AM33XX_MODULEMODE_MASK (0x3 << 0) /* Used by CM_WKUP_DEBUGSS_CLKCTRL */ #define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT 30 +#define AM33XX_OPTCLK_DEBUG_CLKA_WIDTH 1 #define AM33XX_OPTCLK_DEBUG_CLKA_MASK (1 << 30) /* Used by CM_WKUP_DEBUGSS_CLKCTRL */ #define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT 19 +#define AM33XX_OPTFCLKEN_DBGSYSCLK_WIDTH 1 #define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK (1 << 19) /* Used by CM_WKUP_GPIO0_CLKCTRL */ #define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_WIDTH 1 #define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK (1 << 18) /* Used by CM_PER_GPIO1_CLKCTRL */ #define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_WIDTH 1 #define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK (1 << 18) /* Used by CM_PER_GPIO2_CLKCTRL */ #define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_WIDTH 1 #define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK (1 << 18) /* Used by CM_PER_GPIO3_CLKCTRL */ #define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_WIDTH 1 #define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK (1 << 18) /* Used by CM_PER_GPIO4_CLKCTRL */ #define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_WIDTH 1 #define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK (1 << 18) /* Used by CM_PER_GPIO5_CLKCTRL */ #define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_WIDTH 1 #define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK (1 << 18) /* Used by CM_PER_GPIO6_CLKCTRL */ #define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT 18 +#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_WIDTH 1 #define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK (1 << 18) /* @@ -627,25 +744,30 @@ * CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL */ #define AM33XX_STBYST_SHIFT 18 +#define AM33XX_STBYST_WIDTH 1 #define AM33XX_STBYST_MASK (1 << 18) /* Used by CM_WKUP_DEBUGSS_CLKCTRL */ #define AM33XX_STM_PMD_CLKDIVSEL_SHIFT 27 -#define AM33XX_STM_PMD_CLKDIVSEL_MASK (0x29 << 27) +#define AM33XX_STM_PMD_CLKDIVSEL_WIDTH 3 +#define AM33XX_STM_PMD_CLKDIVSEL_MASK (0x7 << 27) /* Used by CM_WKUP_DEBUGSS_CLKCTRL */ #define AM33XX_STM_PMD_CLKSEL_SHIFT 22 -#define AM33XX_STM_PMD_CLKSEL_MASK (0x23 << 22) +#define AM33XX_STM_PMD_CLKSEL_WIDTH 2 +#define AM33XX_STM_PMD_CLKSEL_MASK (0x3 << 22) /* * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP, * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER */ #define AM33XX_ST_DPLL_CLK_SHIFT 0 +#define AM33XX_ST_DPLL_CLK_WIDTH 1 #define AM33XX_ST_DPLL_CLK_MASK (1 << 0) /* Used by CM_CLKDCOLDO_DPLL_PER */ #define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT 8 +#define AM33XX_ST_DPLL_CLKDCOLDO_WIDTH 1 #define AM33XX_ST_DPLL_CLKDCOLDO_MASK (1 << 8) /* @@ -653,18 +775,22 @@ * CM_DIV_M2_DPLL_PER */ #define AM33XX_ST_DPLL_CLKOUT_SHIFT 9 +#define AM33XX_ST_DPLL_CLKOUT_WIDTH 1 #define AM33XX_ST_DPLL_CLKOUT_MASK (1 << 9) /* Used by CM_DIV_M4_DPLL_CORE */ #define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT 9 +#define AM33XX_ST_HSDIVIDER_CLKOUT1_WIDTH 1 #define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK (1 << 9) /* Used by CM_DIV_M5_DPLL_CORE */ #define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT 9 +#define AM33XX_ST_HSDIVIDER_CLKOUT2_WIDTH 1 #define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK (1 << 9) /* Used by CM_DIV_M6_DPLL_CORE */ #define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT 9 +#define AM33XX_ST_HSDIVIDER_CLKOUT3_WIDTH 1 #define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK (1 << 9) /* @@ -672,16 +798,20 @@ * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER */ #define AM33XX_ST_MN_BYPASS_SHIFT 8 +#define AM33XX_ST_MN_BYPASS_WIDTH 1 #define AM33XX_ST_MN_BYPASS_MASK (1 << 8) /* Used by CM_WKUP_DEBUGSS_CLKCTRL */ #define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT 24 -#define AM33XX_TRC_PMD_CLKDIVSEL_MASK (0x26 << 24) +#define AM33XX_TRC_PMD_CLKDIVSEL_WIDTH 3 +#define AM33XX_TRC_PMD_CLKDIVSEL_MASK (0x7 << 24) /* Used by CM_WKUP_DEBUGSS_CLKCTRL */ #define AM33XX_TRC_PMD_CLKSEL_SHIFT 20 -#define AM33XX_TRC_PMD_CLKSEL_MASK (0x21 << 20) +#define AM33XX_TRC_PMD_CLKSEL_WIDTH 2 +#define AM33XX_TRC_PMD_CLKSEL_MASK (0x3 << 20) /* Used by CONTROL_SEC_CLK_CTRL */ +#define AM33XX_TIMER0_CLKSEL_WIDTH 2 #define AM33XX_TIMER0_CLKSEL_MASK (0x3 << 4) #endif diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index c1a5cab..5594b42 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -354,6 +354,7 @@ /* AM33XX CONTROL_STATUS bitfields (partial) */ #define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT 22 +#define AM33XX_CONTROL_STATUS_SYSBOOT1_WIDTH 0x2 #define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK (0x3 << 22) /* CONTROL OMAP STATUS register to identify OMAP3 features */ -- cgit v0.10.2 From b014487044161b83010a9cbe336dbc41d2c38a0b Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 22 Sep 2012 13:53:12 -0700 Subject: ARM: kirkwood: move new dtbs to common Makefile This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d302e66..d4ad2df 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -17,6 +17,9 @@ dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \ usb_a9263.dtb \ usb_a9g20.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ + dove-cubox.dtb \ + dove-dove-db.dtb dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos5250-smdk5250.dtb @@ -32,10 +35,13 @@ dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ + kirkwood-dockstar.dtb \ kirkwood-dreamplug.dtb \ kirkwood-goflexnet.dtb \ kirkwood-ib62x0.dtb \ kirkwood-iconnect.dtb \ + kirkwood-iomega_ix2_200.dtb \ + kirkwood-km_kirkwood.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ kirkwood-ts219-6281.dtb \ diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot index cfac9c5..760a0ef 100644 --- a/arch/arm/mach-dove/Makefile.boot +++ b/arch/arm/mach-dove/Makefile.boot @@ -1,7 +1,3 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 - -dtb-$(CONFIG_MACH_DOVE_DT) += dove-dove-db.dtb -dtb-$(CONFIG_MACH_DOVE_DT) += dove-cm-a510.dtb -dtb-$(CONFIG_MACH_DOVE_DT) += dove-cubox.dtb diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index d90b3cb..760a0ef 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -1,7 +1,3 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 - -dtb-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += kirkwood-iomega_ix2_200.dtb -dtb-$(CONFIG_MACH_DOCKSTAR_DT) += kirkwood-dockstar.dtb -dtb-$(CONFIG_MACH_KM_KIRKWOOD_DT) += kirkwood-km_kirkwood.dtb -- cgit v0.10.2 From 30411c2cad86bac4736589b116c7234c33ceec8f Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 22 Sep 2012 14:17:04 -0700 Subject: ARM: kirkwood: dockstar: fix header include The platform data was moved, but this file was introduced in parallel so didn't get caught in the sweeping changes. Fix it up now. Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c index 6beff21..f2fbb02 100644 --- a/arch/arm/mach-kirkwood/board-dockstar.c +++ b/arch/arm/mach-kirkwood/board-dockstar.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include "common.h" #include "mpp.h" -- cgit v0.10.2 From c9e49024edba46463479d2830b3f36bcceb60ea9 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Sun, 23 Sep 2012 17:28:17 -0600 Subject: ARM: OMAP: hwmod code: remove unused hwmod function prototypes Several hwmod function prototypes appear to not have an implementation because the corresponding functions were removed or renamed. Those prototypes are unneeded anymore - remove them. Signed-off-by: Igor Grinberg [paul@pwsan.com: tweaked subject] Signed-off-by: Paul Walmsley diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 9b9646c..6eedb36 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -591,9 +591,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), int __init omap_hwmod_setup_one(const char *name); int omap_hwmod_enable(struct omap_hwmod *oh); -int _omap_hwmod_enable(struct omap_hwmod *oh); int omap_hwmod_idle(struct omap_hwmod *oh); -int _omap_hwmod_idle(struct omap_hwmod *oh); int omap_hwmod_shutdown(struct omap_hwmod *oh); int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name); @@ -626,11 +624,6 @@ int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh); -int omap_hwmod_set_clockact_both(struct omap_hwmod *oh); -int omap_hwmod_set_clockact_main(struct omap_hwmod *oh); -int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh); -int omap_hwmod_set_clockact_none(struct omap_hwmod *oh); - int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); -- cgit v0.10.2 From 8bb9fde2396b6cd205f404ef6d2aa46eb5b0af26 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Sun, 23 Sep 2012 17:28:18 -0600 Subject: ARM: OMAP2+: omap_device: expose hwmod assert/deassert to omap devices This API is meant to be an interface to hwmod assert/deassert function, omap devices can call them through their platform data to control their reset lines, they are expected to know the name of the reset line they are trying to control. Signed-off-by: Omar Ramirez Luna [paul@pwsan.com: tweaked some documentation; fixed CodingStyle issue] Signed-off-by: Paul Walmsley diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 4327b2c..27bcc24 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -118,6 +118,10 @@ int omap_device_get_context_loss_count(struct platform_device *pdev); /* Other */ +int omap_device_assert_hardreset(struct platform_device *pdev, + const char *name); +int omap_device_deassert_hardreset(struct platform_device *pdev, + const char *name); int omap_device_idle_hwmods(struct omap_device *od); int omap_device_enable_hwmods(struct omap_device *od); diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 6056a62..5b69742 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -920,6 +920,61 @@ int omap_device_shutdown(struct platform_device *pdev) } /** + * omap_device_assert_hardreset - set a device's hardreset line + * @pdev: struct platform_device * to reset + * @name: const char * name of the reset line + * + * Set the hardreset line identified by @name on the IP blocks + * associated with the hwmods backing the platform_device @pdev. All + * of the hwmods associated with @pdev must have the same hardreset + * line linked to them for this to work. Passes along the return value + * of omap_hwmod_assert_hardreset() in the event of any failure, or + * returns 0 upon success. + */ +int omap_device_assert_hardreset(struct platform_device *pdev, const char *name) +{ + struct omap_device *od = to_omap_device(pdev); + int ret = 0; + int i; + + for (i = 0; i < od->hwmods_cnt; i++) { + ret = omap_hwmod_assert_hardreset(od->hwmods[i], name); + if (ret) + break; + } + + return ret; +} + +/** + * omap_device_deassert_hardreset - release a device's hardreset line + * @pdev: struct platform_device * to reset + * @name: const char * name of the reset line + * + * Release the hardreset line identified by @name on the IP blocks + * associated with the hwmods backing the platform_device @pdev. All + * of the hwmods associated with @pdev must have the same hardreset + * line linked to them for this to work. Passes along the return + * value of omap_hwmod_deassert_hardreset() in the event of any + * failure, or returns 0 upon success. + */ +int omap_device_deassert_hardreset(struct platform_device *pdev, + const char *name) +{ + struct omap_device *od = to_omap_device(pdev); + int ret = 0; + int i; + + for (i = 0; i < od->hwmods_cnt; i++) { + ret = omap_hwmod_deassert_hardreset(od->hwmods[i], name); + if (ret) + break; + } + + return ret; +} + +/** * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim * @od: struct omap_device * * -- cgit v0.10.2 From 2b026d137b13047d01d426a61e2d50b5dcb58fd0 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sun, 23 Sep 2012 17:28:18 -0600 Subject: ARM: OMAP4+: hwmod code: remove clkdm requirement in _omap4_wait_target_*() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We're no longer requiring struct omap_hwmod records to contain a clockdomain. So we shouldn't return -EINVAL any more from _omap4_wait_target_disable() or _omap4_wait_target_ready() if there's no clockdomain defined, since that just gets passed back to the caller. This can result in pointless warnings under the relaxed data format. Signed-off-by: Paul Walmsley Cc: Benoît Cousson diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5c8c5e0..18a2df3 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -927,10 +927,10 @@ static void _am33xx_enable_module(struct omap_hwmod *oh) */ static int _omap4_wait_target_disable(struct omap_hwmod *oh) { - if (!oh || !oh->clkdm) + if (!oh) return -EINVAL; - if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + if (oh->_int_flags & _HWMOD_NO_MPU_PORT || !oh->clkdm) return 0; if (oh->flags & HWMOD_NO_IDLEST) @@ -2635,10 +2635,10 @@ static int _omap2_wait_target_ready(struct omap_hwmod *oh) */ static int _omap4_wait_target_ready(struct omap_hwmod *oh) { - if (!oh || !oh->clkdm) + if (!oh) return -EINVAL; - if (oh->flags & HWMOD_NO_IDLEST) + if (oh->flags & HWMOD_NO_IDLEST || !oh->clkdm) return 0; if (!_find_mpu_rt_port(oh)) -- cgit v0.10.2 From 3bb05dbf69018177c06ee09011e2d8bd183dd2ba Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sun, 23 Sep 2012 17:28:18 -0600 Subject: ARM: OMAP2+: hwmod code: convert missing clockdomain warnings to debug messages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The decision was made a few months ago to allow struct omap_hwmod records and struct clk records to omit clockdomain information if the clockdomain is not software-controllable. See for example commit 868c157df9721675c19729eed2c96bac6c3f1d01 ("ARM: OMAP2+: hwmod: remove prm_clkdm, cm_clkdm; allow hwmods to have no clockdomain"). So convert an existing pr_warning() to a pr_debug() (regarding missing clockdomains in clocks), and add a pr_debug() for missing hwmod clockdomains. It's still useful to enable these messages for debugging, since missing clockdomains can cause hard-to-debug problems with power management; see for example commit 6c4a057bffe9823221eab547e11fac181dc18a2b ("ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock"). Signed-off-by: Paul Walmsley Cc: Benoît Cousson diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 18a2df3..4f6b50f2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -696,7 +696,7 @@ static int _init_main_clk(struct omap_hwmod *oh) clk_prepare(oh->_clk); if (!oh->_clk->clkdm) - pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n", + pr_debug("omap_hwmod: %s: missing clockdomain for %s.\n", oh->name, oh->main_clk); return ret; @@ -1454,8 +1454,10 @@ static struct omap_hwmod *_lookup(const char *name) */ static int _init_clkdm(struct omap_hwmod *oh) { - if (!oh->clkdm_name) + if (!oh->clkdm_name) { + pr_debug("omap_hwmod: %s: missing clockdomain\n", oh->name); return 0; + } oh->clkdm = clkdm_lookup(oh->clkdm_name); if (!oh->clkdm) { -- cgit v0.10.2 From 5b8a14be513ca1172c72ec181a5e22ec18fb7bf5 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Sun, 23 Sep 2012 17:28:19 -0600 Subject: ARM: OMAP4: powerdomain: add support for reading prev logic and mem states On OMAP4, there is no support to read previous logic state or previous memory state achieved when a power domain transitions to RET. Instead there are module level context registers. In order to support the powerdomain level logic/mem_off_counters on OMAP4, instead use the previous power state achieved (RET) and the *programmed* logic/mem RET state to derive if a powerdomain lost logic or did not. If the powerdomain is programmed to enter RET state and lose logic in RET state, knowing that the powerdomain entered RET is good enough to derive that the logic was lost as well, in such cases. Signed-off-by: Tero Kristo [paul@pwsan.com: removed dependency on functional power state series for now; bumped copyright date] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c index aeac6f3..aceb4f4 100644 --- a/arch/arm/mach-omap2/powerdomain44xx.c +++ b/arch/arm/mach-omap2/powerdomain44xx.c @@ -1,7 +1,7 @@ /* * OMAP4 powerdomain control * - * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2010, 2012 Texas Instruments, Inc. * Copyright (C) 2007-2009 Nokia Corporation * * Derived from mach-omap2/powerdomain.c written by Paul Walmsley @@ -151,6 +151,34 @@ static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm) return v; } +/** + * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate + * @pwrdm: struct powerdomain * to read the state for + * + * Reads the previous logic powerstate for a powerdomain. This + * function must determine the previous logic powerstate by first + * checking the previous powerstate for the domain. If that was OFF, + * then logic has been lost. If previous state was RETENTION, the + * function reads the setting for the next retention logic state to + * see the actual value. In every other case, the logic is + * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET + * depending whether the logic was retained or not. + */ +static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) +{ + int state; + + state = omap4_pwrdm_read_prev_pwrst(pwrdm); + + if (state == PWRDM_POWER_OFF) + return PWRDM_POWER_OFF; + + if (state != PWRDM_POWER_RET) + return PWRDM_POWER_RET; + + return omap4_pwrdm_read_logic_retst(pwrdm); +} + static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) { u32 m, v; @@ -179,6 +207,35 @@ static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) return v; } +/** + * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate + * @pwrdm: struct powerdomain * to read mem powerstate for + * @bank: memory bank index + * + * Reads the previous memory powerstate for a powerdomain. This + * function must determine the previous memory powerstate by first + * checking the previous powerstate for the domain. If that was OFF, + * then logic has been lost. If previous state was RETENTION, the + * function reads the setting for the next memory retention state to + * see the actual value. In every other case, the logic is + * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET + * depending whether logic was retained or not. + */ +static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + int state; + + state = omap4_pwrdm_read_prev_pwrst(pwrdm); + + if (state == PWRDM_POWER_OFF) + return PWRDM_POWER_OFF; + + if (state != PWRDM_POWER_RET) + return PWRDM_POWER_RET; + + return omap4_pwrdm_read_mem_retst(pwrdm, bank); +} + static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm) { u32 c = 0; @@ -217,9 +274,11 @@ struct pwrdm_ops omap4_pwrdm_operations = { .pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst, .pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst, .pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst, + .pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst, .pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst, .pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst, .pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst, + .pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst, .pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst, .pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst, .pwrdm_wait_transition = omap4_pwrdm_wait_transition, -- cgit v0.10.2 From ce80979aedfce937926a8dd40a1f92fd4bc2fd53 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Sun, 23 Sep 2012 17:28:19 -0600 Subject: ARM: OMAP4: hwmod data: add support for lostcontext_mask Currently hwmod only provides the offset for the context lose register, and if we attempt to share the same register between two or more hwmods, the resulting context loss counts get wrong. Thus, we need a way to specify which bits are used for the context loss information for each. This is accomplished by adding a new field to the omap4 prcm struct, 'lostcontext_mask', which specifies a bit-mask to use for filtering the register. Mark the affected hwmods appropriately. 'l4_abe' hwmod uses the LOSTMEM_AESSMEM bit of RM_ABE_AESS_CONTEXT register, as l4_abe doesn't have its own dedicated register for this purpose. This register is shared with 'aess' hwmod, thus both hwmods must also specify which bits of the register are used for them. This patch only adds the hwmod data, but a future patch should add code support such that only the specified bits are read and cleared by the context lose counter update code. If a hwmod doesn't specify 'lostcontext_mask' (default behavior), the whole contents of the context register should be used without any filtering. Signed-off-by: Tero Kristo [paul@pwsan.com: updated to apply after conversion to use flag bit for missing module context-loss register; combined data and code patches; dropped code change due to serial driver breakage] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 110be87..d3f045b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -202,6 +202,8 @@ static struct omap_hwmod omap44xx_l4_abe_hwmod = { .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET, + .lostcontext_mask = OMAP4430_LOSTMEM_AESSMEM_MASK, }, }, }; @@ -342,6 +344,7 @@ static struct omap_hwmod omap44xx_aess_hwmod = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET, .context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET, + .lostcontext_mask = OMAP4430_LOSTCONTEXT_DFF_MASK, .modulemode = MODULEMODE_SWCTRL, }, }, diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 6eedb36..86b6a4e 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -389,14 +389,21 @@ struct omap_hwmod_omap2_prcm { * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data * @clkctrl_reg: PRCM address of the clock control register * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM + * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM * @submodule_wkdep_bit: bit shift of the WKDEP range + * + * If @lostcontext_mask is not defined, context loss check code uses + * whole register without masking. @lostcontext_mask should only be + * defined in cases where @context_offs register is shared by two or + * more hwmods. */ struct omap_hwmod_omap4_prcm { u16 clkctrl_offs; u16 rstctrl_offs; u16 rstst_offs; u16 context_offs; + u32 lostcontext_mask; u8 submodule_wkdep_bit; u8 modulemode; }; -- cgit v0.10.2 From 46b3af27894a3b414712bef313c4aacb605fccf7 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Sun, 23 Sep 2012 17:28:20 -0600 Subject: ARM: OMAP4: hwmod: flag hwmods/modules not supporting module level context status On OMAP4 most modules/hwmods support module level context status. On OMAP3 and earlier, we relied on the power domain level context status. Identify all modules that don't support 'context_offs' by adding a flag bit, HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT. Rest have a valid 'context_offs' populated in .prcm structure already. Signed-off-by: Tero Kristo [paul@pwsan.com: add flag bit rather than overloading .context_offs; update changelog message] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index d3f045b..0d9f1fe 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -204,6 +204,7 @@ static struct omap_hwmod omap44xx_l4_abe_hwmod = { .clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET, .context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET, .lostcontext_mask = OMAP4430_LOSTMEM_AESSMEM_MASK, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, }, }, }; @@ -260,6 +261,11 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { .name = "mpu_private", .class = &omap44xx_mpu_bus_hwmod_class, .clkdm_name = "mpuss_clkdm", + .prcm = { + .omap4 = { + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, }; /* @@ -449,6 +455,11 @@ static struct omap_hwmod omap44xx_ctrl_module_core_hwmod = { .class = &omap44xx_ctrl_module_hwmod_class, .clkdm_name = "l4_cfg_clkdm", .mpu_irqs = omap44xx_ctrl_module_core_irqs, + .prcm = { + .omap4 = { + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, }; /* ctrl_module_pad_core */ @@ -456,6 +467,11 @@ static struct omap_hwmod omap44xx_ctrl_module_pad_core_hwmod = { .name = "ctrl_module_pad_core", .class = &omap44xx_ctrl_module_hwmod_class, .clkdm_name = "l4_cfg_clkdm", + .prcm = { + .omap4 = { + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, }; /* ctrl_module_wkup */ @@ -463,6 +479,11 @@ static struct omap_hwmod omap44xx_ctrl_module_wkup_hwmod = { .name = "ctrl_module_wkup", .class = &omap44xx_ctrl_module_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .prcm = { + .omap4 = { + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, }; /* ctrl_module_pad_wkup */ @@ -470,6 +491,11 @@ static struct omap_hwmod omap44xx_ctrl_module_pad_wkup_hwmod = { .name = "ctrl_module_pad_wkup", .class = &omap44xx_ctrl_module_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .prcm = { + .omap4 = { + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, }; /* @@ -2539,18 +2565,33 @@ static struct omap_hwmod omap44xx_prcm_mpu_hwmod = { .name = "prcm_mpu", .class = &omap44xx_prcm_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .prcm = { + .omap4 = { + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, }; /* cm_core_aon */ static struct omap_hwmod omap44xx_cm_core_aon_hwmod = { .name = "cm_core_aon", .class = &omap44xx_prcm_hwmod_class, + .prcm = { + .omap4 = { + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, }; /* cm_core */ static struct omap_hwmod omap44xx_cm_core_hwmod = { .name = "cm_core", .class = &omap44xx_prcm_hwmod_class, + .prcm = { + .omap4 = { + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, }; /* prm */ @@ -2586,6 +2627,11 @@ static struct omap_hwmod omap44xx_scrm_hwmod = { .name = "scrm", .class = &omap44xx_scrm_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .prcm = { + .omap4 = { + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, }; /* diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 86b6a4e..09e14ce 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -2,7 +2,7 @@ * omap_hwmod macros, structures * * Copyright (C) 2009-2011 Nokia Corporation - * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley * * Created in collaboration with (alphabetical order): Benoît Cousson, @@ -384,6 +384,14 @@ struct omap_hwmod_omap2_prcm { u8 idlest_stdby_bit; }; +/* + * Possible values for struct omap_hwmod_omap4_prcm.flags + * + * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM + * module-level context loss register associated with them; this + * flag bit should be set in those cases + */ +#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0) /** * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data @@ -392,6 +400,7 @@ struct omap_hwmod_omap2_prcm { * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM * @submodule_wkdep_bit: bit shift of the WKDEP range + * @flags: PRCM register capabilities for this IP block * * If @lostcontext_mask is not defined, context loss check code uses * whole register without masking. @lostcontext_mask should only be @@ -406,6 +415,7 @@ struct omap_hwmod_omap4_prcm { u32 lostcontext_mask; u8 submodule_wkdep_bit; u8 modulemode; + u8 flags; }; -- cgit v0.10.2 From eb05f691290e99ee0bd1672317d6add789523c1e Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Sun, 23 Sep 2012 17:28:20 -0600 Subject: ARM: OMAP: hwmod: partially un-reset hwmods might not be properly enabled Some IP blocks might not be using/controlling more than one reset line, this check loosens the restriction to fully use hwmod framework for those drivers. E.g.: ipu has reset lines: mmu_cache, cpu0 and cpu1. - As of now cpu1 is not used and hence (with previous check) the IP block isn't fully enabled by hwmod code. - Usually ipu and dsp processors configure their mmu module first and then enable the processors, this involves: * Deasserting mmu reset line, and enabling the module. * Deasserting cpu0 reset line, and enabling the processor. The ones portrayed in this example are controlled through rproc_fw_boot in drivers/remoteproc/remoteproc_core.c While at it, prevent _omap4_module_disable if all the hardreset lines on an IP block are not under reset. This will allow the driver to: a. Deassert the reset line. b. Enable the hwmod through runtime PM default callbacks. c. Do its usecase. d. Disable hwmod through runtime PM. e. Assert the reset line. Signed-off-by: Omar Ramirez Luna [paul@pwsan.com: updated to apply] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 4f6b50f2..8d93352 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1634,25 +1634,28 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name) } /** - * _are_any_hardreset_lines_asserted - return true if part of @oh is hard-reset + * _are_all_hardreset_lines_asserted - return true if the @oh is hard-reset * @oh: struct omap_hwmod * * - * If any hardreset line associated with @oh is asserted, then return true. - * Otherwise, if @oh has no hardreset lines associated with it, or if - * no hardreset lines associated with @oh are asserted, then return false. + * If all hardreset lines associated with @oh are asserted, then return true. + * Otherwise, if part of @oh is out hardreset or if no hardreset lines + * associated with @oh are asserted, then return false. * This function is used to avoid executing some parts of the IP block - * enable/disable sequence if a hardreset line is set. + * enable/disable sequence if its hardreset line is set. */ -static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh) +static bool _are_all_hardreset_lines_asserted(struct omap_hwmod *oh) { - int i; + int i, rst_cnt = 0; if (oh->rst_lines_cnt == 0) return false; for (i = 0; i < oh->rst_lines_cnt; i++) if (_read_hardreset(oh, oh->rst_lines[i].name) > 0) - return true; + rst_cnt++; + + if (oh->rst_lines_cnt == rst_cnt) + return true; return false; } @@ -1671,6 +1674,13 @@ static int _omap4_disable_module(struct omap_hwmod *oh) if (!oh->clkdm || !oh->prcm.omap4.modulemode) return -EINVAL; + /* + * Since integration code might still be doing something, only + * disable if all lines are under hardreset. + */ + if (!_are_all_hardreset_lines_asserted(oh)) + return 0; + pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); omap4_cminst_module_disable(oh->clkdm->prcm_partition, @@ -1678,9 +1688,6 @@ static int _omap4_disable_module(struct omap_hwmod *oh) oh->clkdm->clkdm_offs, oh->prcm.omap4.clkctrl_offs); - if (_are_any_hardreset_lines_asserted(oh)) - return 0; - v = _omap4_wait_target_disable(oh); if (v) pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", @@ -1708,7 +1715,7 @@ static int _am33xx_disable_module(struct omap_hwmod *oh) am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs, oh->prcm.omap4.clkctrl_offs); - if (_are_any_hardreset_lines_asserted(oh)) + if (_are_all_hardreset_lines_asserted(oh)) return 0; v = _am33xx_wait_target_disable(oh); @@ -1936,7 +1943,7 @@ static int _enable(struct omap_hwmod *oh) } /* - * If an IP block contains HW reset lines and any of them are + * If an IP block contains HW reset lines and all of them are * asserted, we let integration code associated with that * block handle the enable. We've received very little * information on what those driver authors need, and until @@ -1944,7 +1951,7 @@ static int _enable(struct omap_hwmod *oh) * posted to the public lists, this is probably the best we * can do. */ - if (_are_any_hardreset_lines_asserted(oh)) + if (_are_all_hardreset_lines_asserted(oh)) return 0; /* Mux pins for device runtime if populated */ @@ -2025,7 +2032,7 @@ static int _idle(struct omap_hwmod *oh) return -EINVAL; } - if (_are_any_hardreset_lines_asserted(oh)) + if (_are_all_hardreset_lines_asserted(oh)) return 0; if (oh->class->sysc) @@ -2113,7 +2120,7 @@ static int _shutdown(struct omap_hwmod *oh) return -EINVAL; } - if (_are_any_hardreset_lines_asserted(oh)) + if (_are_all_hardreset_lines_asserted(oh)) return 0; pr_debug("omap_hwmod: %s: disabling\n", oh->name); -- cgit v0.10.2 From e8e96dff71efcf880d9fa446651b3c3db08957c4 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Sun, 23 Sep 2012 17:28:21 -0600 Subject: ARM: OMAP: hwmod: revise deassert sequence For a reset sequence to complete cleanly, a module needs its associated clocks to be enabled, otherwise the timeout check in prcm code can print a false failure (failed to hardreset) that occurs because the clocks aren't powered ON and the status bit checked can't transition without them. Signed-off-by: Omar Ramirez Luna Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 8d93352..2129987 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1585,6 +1585,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; int ret = -EINVAL; + int hwsup = 0; if (!oh) return -EINVAL; @@ -1596,10 +1597,46 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) if (IS_ERR_VALUE(ret)) return ret; + if (oh->clkdm) { + /* + * A clockdomain must be in SW_SUP otherwise reset + * might not be completed. The clockdomain can be set + * in HW_AUTO only when the module become ready. + */ + hwsup = clkdm_in_hwsup(oh->clkdm); + ret = clkdm_hwmod_enable(oh->clkdm, oh); + if (ret) { + WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n", + oh->name, oh->clkdm->name, ret); + return ret; + } + } + + _enable_clocks(oh); + if (soc_ops.enable_module) + soc_ops.enable_module(oh); + ret = soc_ops.deassert_hardreset(oh, &ohri); + + if (soc_ops.disable_module) + soc_ops.disable_module(oh); + _disable_clocks(oh); + if (ret == -EBUSY) pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name); + if (!ret) { + /* + * Set the clockdomain to HW_AUTO, assuming that the + * previous state was HW_AUTO. + */ + if (oh->clkdm && hwsup) + clkdm_allow_idle(oh->clkdm); + } else { + if (oh->clkdm) + clkdm_hwmod_disable(oh->clkdm, oh); + } + return ret; } -- cgit v0.10.2 From 8f993a01978ce61ac2312eafbe1c7b348e5b0f5a Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Sun, 23 Sep 2012 17:28:21 -0600 Subject: ARM: OMAP3: hwmod data: add sad2d hwmod SAD2D stands for the die to die interface, and is used for communicating with the optional stacked modem. This hwmod is added in preparation for the d2d_idle move from pm34xx.c to hwmod data. Signed-off-by: Tero Kristo [paul@pwsan.com: SAD2D presumably doesn't exist on non-OMAP34xx/OMAP36xx, so only add it to the OMAP34xx/OMAP36xx lists] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 975f6bd..59598ff 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -218,6 +218,8 @@ #define OMAP3430_ST_MAILBOXES_MASK (1 << 7) #define OMAP3430_ST_OMAPCTRL_SHIFT 6 #define OMAP3430_ST_OMAPCTRL_MASK (1 << 6) +#define OMAP3430_ST_SAD2D_SHIFT 3 +#define OMAP3430_ST_SAD2D_MASK (1 << 3) #define OMAP3430_ST_SDMA_SHIFT 2 #define OMAP3430_ST_SDMA_MASK (1 << 2) #define OMAP3430_ST_SDRC_SHIFT 1 diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 8fec2ce..f1328bc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2033,6 +2033,33 @@ static struct omap_hwmod omap3xxx_hdq1w_hwmod = { .class = &omap2_hdq1w_class, }; +/* SAD2D */ +static struct omap_hwmod_rst_info omap3xxx_sad2d_resets[] = { + { .name = "rst_modem_pwron_sw", .rst_shift = 0 }, + { .name = "rst_modem_sw", .rst_shift = 1 }, +}; + +static struct omap_hwmod_class omap3xxx_sad2d_class = { + .name = "sad2d", +}; + +static struct omap_hwmod omap3xxx_sad2d_hwmod = { + .name = "sad2d", + .rst_lines = omap3xxx_sad2d_resets, + .rst_lines_cnt = ARRAY_SIZE(omap3xxx_sad2d_resets), + .main_clk = "sad2d_ick", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_SAD2D_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_SAD2D_SHIFT, + }, + }, + .class = &omap3xxx_sad2d_class, +}; + /* * '32K sync counter' class * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock @@ -2137,6 +2164,14 @@ static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = { .user = OCP_USER_MPU, }; +/* l3_core -> sad2d interface */ +static struct omap_hwmod_ocp_if omap3xxx_sad2d__l3 = { + .master = &omap3xxx_sad2d_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "core_l3_ick", + .user = OCP_USER_MPU, +}; + /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { .master = &omap3xxx_l4_core_hwmod, @@ -3371,6 +3406,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = { &omap34xx_l4_core__sr2, &omap3xxx_l4_core__mailbox, &omap3xxx_l4_core__hdq1w, + &omap3xxx_sad2d__l3, NULL }; @@ -3391,6 +3427,7 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__es3plus_mmc1, &omap3xxx_l4_core__es3plus_mmc2, &omap3xxx_l4_core__hdq1w, + &omap3xxx_sad2d__l3, NULL }; -- cgit v0.10.2 From 33c976ec446f8be2d86b612efbb82ea31aff2254 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Sun, 23 Sep 2012 17:28:21 -0600 Subject: ARM: OMAP4: hwmod data: Fix ocp2scp_usb_phy and usb_host_hs entries ocp2scp_usb_phy was missing the address space data and thus the sysconfig was not populated either. The usb_host_hs address space was wrong. Fix both of them and add the missing sysconfig entry. Reported-by: Kishon Vijay Abraham Signed-off-by: Benoit Cousson Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 0d9f1fe..01f18b5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2526,8 +2526,19 @@ static struct omap_hwmod omap44xx_ocmc_ram_hwmod = { * protocol */ +static struct omap_hwmod_class_sysconfig omap44xx_ocp2scp_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = { .name = "ocp2scp", + .sysc = &omap44xx_ocp2scp_sysc, }; /* ocp2scp_usb_phy */ @@ -5311,11 +5322,21 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_addr_space omap44xx_ocp2scp_usb_phy_addrs[] = { + { + .pa_start = 0x4a0ad000, + .pa_end = 0x4a0ad01f, + .flags = ADDR_TYPE_RT + }, + { } +}; + /* l4_cfg -> ocp2scp_usb_phy */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp2scp_usb_phy = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_ocp2scp_usb_phy_hwmod, .clk = "l4_div_ck", + .addr = omap44xx_ocp2scp_usb_phy_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -5935,7 +5956,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = { static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = { { .pa_start = 0x4a0ab000, - .pa_end = 0x4a0ab003, + .pa_end = 0x4a0ab7ff, .flags = ADDR_TYPE_RT }, { } -- cgit v0.10.2 From 1b024d2f60bdceefdc4a03855eb4bd241a403828 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Sun, 23 Sep 2012 17:28:22 -0600 Subject: ARM: OMAP4: hwmod data: make *phy_48m* as the main_clk of ocp2scp MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Made *ocp2scp_usb_phy_phy_48m* as the main_clk for ocp2scp. Since this ocp2scp module does not have any fck but does have a single opt_clock, it is added as the main_clk for ocp2scp. Also removed phy_48m as the optional clock since it is now made as the main clock. By this the driver need not enable/disable phy_48m clk separately and runtime_get/runtime_put will take care of that. Cc: Benoît Cousson Reviewed-by: Felipe Balbi Signed-off-by: Kishon Vijay Abraham I Acked-by: Benoît Cousson Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 01f18b5..728e3e7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2542,14 +2542,11 @@ static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = { }; /* ocp2scp_usb_phy */ -static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = { - { .role = "phy_48m", .clk = "ocp2scp_usb_phy_phy_48m" }, -}; - static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", .class = &omap44xx_ocp2scp_hwmod_class, .clkdm_name = "l3_init_clkdm", + .main_clk = "ocp2scp_usb_phy_phy_48m", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET, @@ -2557,8 +2554,6 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, - .opt_clks = ocp2scp_usb_phy_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks), }; /* -- cgit v0.10.2 From 53cce97c3922fe4c08d2474e4f7b1968e79d7219 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sun, 23 Sep 2012 17:28:22 -0600 Subject: ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some struct omap_hwmod records belonging to PRCM IP blocks are missing HWMOD_NO_IDLEST flags; add them. Signed-off-by: Paul Walmsley Cc: Benoît Cousson diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 728e3e7..5b3c618 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2571,6 +2571,7 @@ static struct omap_hwmod omap44xx_prcm_mpu_hwmod = { .name = "prcm_mpu", .class = &omap44xx_prcm_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_NO_IDLEST, .prcm = { .omap4 = { .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, @@ -2582,6 +2583,7 @@ static struct omap_hwmod omap44xx_prcm_mpu_hwmod = { static struct omap_hwmod omap44xx_cm_core_aon_hwmod = { .name = "cm_core_aon", .class = &omap44xx_prcm_hwmod_class, + .flags = HWMOD_NO_IDLEST, .prcm = { .omap4 = { .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, @@ -2593,6 +2595,7 @@ static struct omap_hwmod omap44xx_cm_core_aon_hwmod = { static struct omap_hwmod omap44xx_cm_core_hwmod = { .name = "cm_core", .class = &omap44xx_prcm_hwmod_class, + .flags = HWMOD_NO_IDLEST, .prcm = { .omap4 = { .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, -- cgit v0.10.2 From 7460f1407ed8d46042b81a4227f19bc03e4d1072 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Sun, 23 Sep 2012 17:28:23 -0600 Subject: ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected If included without IOMMU_API being selected it will break compilation: arch/arm/plat-omap/include/plat/iommu.h: In function 'dev_to_omap_iommu': arch/arm/plat-omap/include/plat/iommu.h:148: error: 'struct dev_archdata' has no member named 'iommu' This will be seen when hwmod includes iommu.h to get the structure for attributes. Also needed for tidspbridge incremental migration to use iommu code. Cc: Tony Lindgren Signed-off-by: Omar Ramirez Luna Signed-off-by: Paul Walmsley diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h index 88be3e6..e58d571 100644 --- a/arch/arm/plat-omap/include/plat/iommu.h +++ b/arch/arm/plat-omap/include/plat/iommu.h @@ -126,6 +126,7 @@ struct omap_iommu_arch_data { struct omap_iommu *iommu_dev; }; +#ifdef CONFIG_IOMMU_API /** * dev_to_omap_iommu() - retrieves an omap iommu object from a user device * @dev: iommu client device @@ -136,6 +137,7 @@ static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev) return arch_data->iommu_dev; } +#endif /* IOMMU errors */ #define OMAP_IOMMU_ERR_TLB_MISS (1 << 0) -- cgit v0.10.2 From 5486474cff36517fa1c8d62573d4f7b504817e98 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sun, 23 Sep 2012 17:28:23 -0600 Subject: ARM: OMAP3: hwmod data: add mmu data for iva and isp Add mmu hwmod data for iva and isp. Due to compatibility an ifdef CONFIG_OMAP_IOMMU_IVA2 needs to be propagated (previously on iommu resource info) to hwmod data in OMAP3, so users of iommu and tidspbridge can avoid issues of two modules managing mmu data/irqs/resets; this until tidspbridge can be migrated to iommu framework. Cc: Benoit Cousson Signed-off-by: Omar Ramirez Luna [paul@pwsan.com: fixed some kerneldoc and whitespace; ISP MMUs not present on AM35xx so restricted these hwmods to 34xx/36xx] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index f1328bc..11442d8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -27,6 +27,7 @@ #include #include #include +#include #include @@ -2858,6 +2859,122 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* + * 'mmu' class + * The memory management unit performs virtual to physical address translation + * for its requestors. + */ + +static struct omap_hwmod_class_sysconfig mmu_sysc = { + .rev_offs = 0x000, + .sysc_offs = 0x010, + .syss_offs = 0x014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_mmu_hwmod_class = { + .name = "mmu", + .sysc = &mmu_sysc, +}; + +/* mmu isp */ + +static struct omap_mmu_dev_attr mmu_isp_dev_attr = { + .da_start = 0x0, + .da_end = 0xfffff000, + .nr_tlb_entries = 8, +}; + +static struct omap_hwmod omap3xxx_mmu_isp_hwmod; +static struct omap_hwmod_irq_info omap3xxx_mmu_isp_irqs[] = { + { .irq = 24 }, + { .irq = -1 } +}; + +static struct omap_hwmod_addr_space omap3xxx_mmu_isp_addrs[] = { + { + .pa_start = 0x480bd400, + .pa_end = 0x480bd47f, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_core -> mmu isp */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmu_isp = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_mmu_isp_hwmod, + .addr = omap3xxx_mmu_isp_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod omap3xxx_mmu_isp_hwmod = { + .name = "mmu_isp", + .class = &omap3xxx_mmu_hwmod_class, + .mpu_irqs = omap3xxx_mmu_isp_irqs, + .main_clk = "cam_ick", + .dev_attr = &mmu_isp_dev_attr, + .flags = HWMOD_NO_IDLEST, +}; + +#ifdef CONFIG_OMAP_IOMMU_IVA2 + +/* mmu iva */ + +static struct omap_mmu_dev_attr mmu_iva_dev_attr = { + .da_start = 0x11000000, + .da_end = 0xfffff000, + .nr_tlb_entries = 32, +}; + +static struct omap_hwmod omap3xxx_mmu_iva_hwmod; +static struct omap_hwmod_irq_info omap3xxx_mmu_iva_irqs[] = { + { .irq = 28 }, + { .irq = -1 } +}; + +static struct omap_hwmod_rst_info omap3xxx_mmu_iva_resets[] = { + { .name = "mmu", .rst_shift = 1, .st_shift = 9 }, +}; + +static struct omap_hwmod_addr_space omap3xxx_mmu_iva_addrs[] = { + { + .pa_start = 0x5d000000, + .pa_end = 0x5d00007f, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l3_main -> iva mmu */ +static struct omap_hwmod_ocp_if omap3xxx_l3_main__mmu_iva = { + .master = &omap3xxx_l3_main_hwmod, + .slave = &omap3xxx_mmu_iva_hwmod, + .addr = omap3xxx_mmu_iva_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod omap3xxx_mmu_iva_hwmod = { + .name = "mmu_iva", + .class = &omap3xxx_mmu_hwmod_class, + .mpu_irqs = omap3xxx_mmu_iva_irqs, + .rst_lines = omap3xxx_mmu_iva_resets, + .rst_lines_cnt = ARRAY_SIZE(omap3xxx_mmu_iva_resets), + .main_clk = "iva2_ck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430_IVA2_MOD, + }, + }, + .dev_attr = &mmu_iva_dev_attr, + .flags = HWMOD_NO_IDLEST, +}; + +#endif + /* l4_per -> gpio4 */ static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = { { @@ -3407,6 +3524,10 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__mailbox, &omap3xxx_l4_core__hdq1w, &omap3xxx_sad2d__l3, + &omap3xxx_l4_core__mmu_isp, +#ifdef CONFIG_OMAP_IOMMU_IVA2 + &omap3xxx_l3_main__mmu_iva, +#endif NULL }; @@ -3428,6 +3549,10 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__es3plus_mmc2, &omap3xxx_l4_core__hdq1w, &omap3xxx_sad2d__l3, + &omap3xxx_l4_core__mmu_isp, +#ifdef CONFIG_OMAP_IOMMU_IVA2 + &omap3xxx_l3_main__mmu_iva, +#endif NULL }; diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h index e58d571..68b5f03 100644 --- a/arch/arm/plat-omap/include/plat/iommu.h +++ b/arch/arm/plat-omap/include/plat/iommu.h @@ -103,6 +103,19 @@ struct iommu_functions { ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len); }; +/** + * struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod + * @da_start: device address where the va space starts. + * @da_end: device address where the va space ends. + * @nr_tlb_entries: number of entries supported by the translation + * look-aside buffer (TLB). + */ +struct omap_mmu_dev_attr { + u32 da_start; + u32 da_end; + int nr_tlb_entries; +}; + struct iommu_platform_data { const char *name; const char *clk_name; -- cgit v0.10.2 From 230844db9046ff88628afbf0f43b03bc4c9e4f11 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Sun, 23 Sep 2012 17:28:24 -0600 Subject: ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp Add mmu hwmod data for ipu and dsp. Cc: Benoit Cousson Signed-off-by: Omar Ramirez Luna Acked-by: Benoit Cousson [paul@pwsan.com: cleaned up whitespace] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 5b3c618..d623374 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "omap_hwmod_common_data.h" #include "cm1_44xx.h" @@ -640,7 +641,6 @@ static struct omap_hwmod_irq_info omap44xx_dsp_irqs[] = { static struct omap_hwmod_rst_info omap44xx_dsp_resets[] = { { .name = "dsp", .rst_shift = 0 }, - { .name = "mmu_cache", .rst_shift = 1 }, }; static struct omap_hwmod omap44xx_dsp_hwmod = { @@ -1660,7 +1660,6 @@ static struct omap_hwmod_irq_info omap44xx_ipu_irqs[] = { static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = { { .name = "cpu0", .rst_shift = 0 }, { .name = "cpu1", .rst_shift = 1 }, - { .name = "mmu_cache", .rst_shift = 2 }, }; static struct omap_hwmod omap44xx_ipu_hwmod = { @@ -2467,6 +2466,137 @@ static struct omap_hwmod omap44xx_mmc5_hwmod = { }; /* + * 'mmu' class + * The memory management unit performs virtual to physical address translation + * for its requestors. + */ + +static struct omap_hwmod_class_sysconfig mmu_sysc = { + .rev_offs = 0x000, + .sysc_offs = 0x010, + .syss_offs = 0x014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_mmu_hwmod_class = { + .name = "mmu", + .sysc = &mmu_sysc, +}; + +/* mmu ipu */ + +static struct omap_mmu_dev_attr mmu_ipu_dev_attr = { + .da_start = 0x0, + .da_end = 0xfffff000, + .nr_tlb_entries = 32, +}; + +static struct omap_hwmod omap44xx_mmu_ipu_hwmod; +static struct omap_hwmod_irq_info omap44xx_mmu_ipu_irqs[] = { + { .irq = 100 + OMAP44XX_IRQ_GIC_START, }, + { .irq = -1 } +}; + +static struct omap_hwmod_rst_info omap44xx_mmu_ipu_resets[] = { + { .name = "mmu_cache", .rst_shift = 2 }, +}; + +static struct omap_hwmod_addr_space omap44xx_mmu_ipu_addrs[] = { + { + .pa_start = 0x55082000, + .pa_end = 0x550820ff, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l3_main_2 -> mmu_ipu */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__mmu_ipu = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_mmu_ipu_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_mmu_ipu_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod omap44xx_mmu_ipu_hwmod = { + .name = "mmu_ipu", + .class = &omap44xx_mmu_hwmod_class, + .clkdm_name = "ducati_clkdm", + .mpu_irqs = omap44xx_mmu_ipu_irqs, + .rst_lines = omap44xx_mmu_ipu_resets, + .rst_lines_cnt = ARRAY_SIZE(omap44xx_mmu_ipu_resets), + .main_clk = "ducati_clk_mux_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET, + .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET, + .context_offs = OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .dev_attr = &mmu_ipu_dev_attr, +}; + +/* mmu dsp */ + +static struct omap_mmu_dev_attr mmu_dsp_dev_attr = { + .da_start = 0x0, + .da_end = 0xfffff000, + .nr_tlb_entries = 32, +}; + +static struct omap_hwmod omap44xx_mmu_dsp_hwmod; +static struct omap_hwmod_irq_info omap44xx_mmu_dsp_irqs[] = { + { .irq = 28 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } +}; + +static struct omap_hwmod_rst_info omap44xx_mmu_dsp_resets[] = { + { .name = "mmu_cache", .rst_shift = 1 }, +}; + +static struct omap_hwmod_addr_space omap44xx_mmu_dsp_addrs[] = { + { + .pa_start = 0x4a066000, + .pa_end = 0x4a0660ff, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_cfg -> dsp */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mmu_dsp = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_mmu_dsp_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mmu_dsp_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod omap44xx_mmu_dsp_hwmod = { + .name = "mmu_dsp", + .class = &omap44xx_mmu_hwmod_class, + .clkdm_name = "tesla_clkdm", + .mpu_irqs = omap44xx_mmu_dsp_irqs, + .rst_lines = omap44xx_mmu_dsp_resets, + .rst_lines_cnt = ARRAY_SIZE(omap44xx_mmu_dsp_resets), + .main_clk = "dpll_iva_m4x2_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET, + .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET, + .context_offs = OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .dev_attr = &mmu_dsp_dev_attr, +}; + +/* * 'mpu' class * mpu sub-system */ @@ -6159,6 +6289,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__mmc3, &omap44xx_l4_per__mmc4, &omap44xx_l4_per__mmc5, + &omap44xx_l3_main_2__mmu_ipu, + &omap44xx_l4_cfg__mmu_dsp, &omap44xx_l3_main_2__ocmc_ram, &omap44xx_l4_cfg__ocp2scp_usb_phy, &omap44xx_mpu_private__prcm_mpu, -- cgit v0.10.2 From 49484a60ff665ccac2e4f2314753a21daa0c2f9e Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Sun, 23 Sep 2012 17:28:24 -0600 Subject: ARM: OMAP2/3: hwmod data: add gpmc Add gpmc hwmod and associated interconnect data Signed-off-by: Afzal Mohammed [paul@pwsan.com: added comments to the use of HWMOD_INIT_NO_RESET] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 4e81637..5fcd225 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -535,6 +535,15 @@ static struct omap_hwmod_addr_space omap2420_counter_32k_addrs[] = { { } }; +static struct omap_hwmod_addr_space omap2420_gpmc_addrs[] = { + { + .pa_start = 0x6800a000, + .pa_end = 0x6800afff, + .flags = ADDR_TYPE_RT + }, + { } +}; + static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_counter_32k_hwmod, @@ -543,6 +552,14 @@ static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_ocp_if omap2420_l3__gpmc = { + .master = &omap2xxx_l3_main_hwmod, + .slave = &omap2xxx_gpmc_hwmod, + .clk = "core_l3_ck", + .addr = omap2420_gpmc_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2xxx_l3_main__l4_core, &omap2xxx_mpu__l3_main, @@ -586,6 +603,7 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2420_l4_core__msdi1, &omap2420_l4_core__hdq1w, &omap2420_l4_wkup__counter_32k, + &omap2420_l3__gpmc, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index ceb23c3..a560563 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -887,6 +887,15 @@ static struct omap_hwmod_addr_space omap2430_counter_32k_addrs[] = { { } }; +static struct omap_hwmod_addr_space omap2430_gpmc_addrs[] = { + { + .pa_start = 0x6e000000, + .pa_end = 0x6e000fff, + .flags = ADDR_TYPE_RT + }, + { } +}; + static struct omap_hwmod_ocp_if omap2430_l4_wkup__counter_32k = { .master = &omap2xxx_l4_wkup_hwmod, .slave = &omap2xxx_counter_32k_hwmod, @@ -895,6 +904,14 @@ static struct omap_hwmod_ocp_if omap2430_l4_wkup__counter_32k = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_ocp_if omap2430_l3__gpmc = { + .master = &omap2xxx_l3_main_hwmod, + .slave = &omap2xxx_gpmc_hwmod, + .clk = "core_l3_ck", + .addr = omap2430_gpmc_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { &omap2xxx_l3_main__l4_core, &omap2xxx_mpu__l3_main, @@ -945,6 +962,7 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { &omap2430_l4_core__mcbsp5, &omap2430_l4_core__hdq1w, &omap2430_l4_wkup__counter_32k, + &omap2430_l3__gpmc, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index ceb3052..3c00906 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -173,6 +173,26 @@ struct omap_hwmod_class omap2xxx_mcspi_class = { }; /* + * 'gpmc' class + * general purpose memory controller + */ + +static struct omap_hwmod_class_sysconfig omap2xxx_gpmc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2xxx_gpmc_hwmod_class = { + .name = "gpmc", + .sysc = &omap2xxx_gpmc_sysc, +}; + +/* * IP blocks */ @@ -724,7 +744,6 @@ struct omap_hwmod omap2xxx_mcspi2_hwmod = { .dev_attr = &omap_mcspi2_dev_attr, }; - static struct omap_hwmod_class omap2xxx_counter_hwmod_class = { .name = "counter", }; @@ -743,3 +762,33 @@ struct omap_hwmod omap2xxx_counter_32k_hwmod = { }, .class = &omap2xxx_counter_hwmod_class, }; + +/* gpmc */ +static struct omap_hwmod_irq_info omap2xxx_gpmc_irqs[] = { + { .irq = 20 }, + { .irq = -1 } +}; + +struct omap_hwmod omap2xxx_gpmc_hwmod = { + .name = "gpmc", + .class = &omap2xxx_gpmc_hwmod_class, + .mpu_irqs = omap2xxx_gpmc_irqs, + .main_clk = "gpmc_fck", + /* + * XXX HWMOD_INIT_NO_RESET should not be needed for this IP + * block. It is not being added due to any known bugs with + * resetting the GPMC IP block, but rather because any timings + * set by the bootloader are not being correctly programmed by + * the kernel from the board file or DT data. + * HWMOD_INIT_NO_RESET should be removed ASAP. + */ + .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | + HWMOD_NO_IDLEST), + .prcm = { + .omap2 = { + .prcm_reg_id = 3, + .module_bit = OMAP24XX_EN_GPMC_MASK, + .module_offs = CORE_MOD, + }, + }, +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 11442d8..da6eca0f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2096,6 +2096,49 @@ static struct omap_hwmod omap3xxx_counter_32k_hwmod = { }; /* + * 'gpmc' class + * general purpose memory controller + */ + +static struct omap_hwmod_class_sysconfig omap3xxx_gpmc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_gpmc_hwmod_class = { + .name = "gpmc", + .sysc = &omap3xxx_gpmc_sysc, +}; + +static struct omap_hwmod_irq_info omap3xxx_gpmc_irqs[] = { + { .irq = 20 }, + { .irq = -1 } +}; + +static struct omap_hwmod omap3xxx_gpmc_hwmod = { + .name = "gpmc", + .class = &omap3xxx_gpmc_hwmod_class, + .clkdm_name = "core_l3_clkdm", + .mpu_irqs = omap3xxx_gpmc_irqs, + .main_clk = "gpmc_fck", + /* + * XXX HWMOD_INIT_NO_RESET should not be needed for this IP + * block. It is not being added due to any known bugs with + * resetting the GPMC IP block, but rather because any timings + * set by the bootloader are not being correctly programmed by + * the kernel from the board file or DT data. + * HWMOD_INIT_NO_RESET should be removed ASAP. + */ + .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | + HWMOD_NO_IDLEST), +}; + +/* * interfaces */ @@ -3320,6 +3363,15 @@ static struct omap_hwmod_addr_space omap3xxx_counter_32k_addrs[] = { { } }; +static struct omap_hwmod_addr_space omap3xxx_gpmc_addrs[] = { + { + .pa_start = 0x6e000000, + .pa_end = 0x6e000fff, + .flags = ADDR_TYPE_RT + }, + { } +}; + static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = { .master = &omap3xxx_l4_wkup_hwmod, .slave = &omap3xxx_counter_32k_hwmod, @@ -3429,6 +3481,14 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__emac = { .user = OCP_USER_MPU, }; +static struct omap_hwmod_ocp_if omap3xxx_l3_main__gpmc = { + .master = &omap3xxx_l3_main_hwmod, + .slave = &omap3xxx_gpmc_hwmod, + .clk = "core_l3_ick", + .addr = omap3xxx_gpmc_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l3_main__l4_core, &omap3xxx_l3_main__l4_per, @@ -3474,6 +3534,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap34xx_l4_core__mcspi3, &omap34xx_l4_core__mcspi4, &omap3xxx_l4_wkup__counter_32k, + &omap3xxx_l3_main__gpmc, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index d623374..46fd80c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1352,6 +1352,14 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = { .name = "gpmc", .class = &omap44xx_gpmc_hwmod_class, .clkdm_name = "l3_2_clkdm", + /* + * XXX HWMOD_INIT_NO_RESET should not be needed for this IP + * block. It is not being added due to any known bugs with + * resetting the GPMC IP block, but rather because any timings + * set by the bootloader are not being correctly programmed by + * the kernel from the board file or DT data. + * HWMOD_INIT_NO_RESET should be removed ASAP. + */ .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, .mpu_irqs = omap44xx_gpmc_irqs, .sdma_reqs = omap44xx_gpmc_sdma_reqs, diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index dddb677..6a033b8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -77,6 +77,7 @@ extern struct omap_hwmod omap2xxx_gpio4_hwmod; extern struct omap_hwmod omap2xxx_mcspi1_hwmod; extern struct omap_hwmod omap2xxx_mcspi2_hwmod; extern struct omap_hwmod omap2xxx_counter_32k_hwmod; +extern struct omap_hwmod omap2xxx_gpmc_hwmod; /* Common interface data across OMAP2xxx */ extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core; diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index e5f0503..72df974 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -109,6 +109,8 @@ #define OMAP2430_EN_MDM_INTC_MASK (1 << 11) #define OMAP2430_EN_USBHS_SHIFT 6 #define OMAP2430_EN_USBHS_MASK (1 << 6) +#define OMAP24XX_EN_GPMC_SHIFT 1 +#define OMAP24XX_EN_GPMC_MASK (1 << 1) /* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */ #define OMAP2420_ST_MMC_SHIFT 26 -- cgit v0.10.2 From 4be48fd53bb7620220be5677bd767cda6d9ece0f Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Sun, 23 Sep 2012 17:28:24 -0600 Subject: ARM: OMAP2+: gpmc: Adapt to HWMOD Create API for platforms to adapt GPMC to HWMOD Signed-off-by: Afzal Mohammed Reviewed-by: Jon Hunter Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index fe75656..396ce77 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -31,10 +31,13 @@ #include #include #include +#include #include "soc.h" #include "common.h" +#define DEVICE_NAME "omap-gpmc" + /* GPMC register offsets */ #define GPMC_REVISION 0x00 #define GPMC_SYSCONFIG 0x10 @@ -898,6 +901,25 @@ static int __init gpmc_init(void) } postcore_initcall(gpmc_init); +static int __init omap_gpmc_init(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + char *oh_name = "gpmc"; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + return -ENODEV; + } + + pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); + + return IS_ERR(pdev) ? PTR_ERR(pdev) : 0; +} +postcore_initcall(omap_gpmc_init); + static irqreturn_t gpmc_handle_irq(int irq, void *dev) { int i; -- cgit v0.10.2 From da496873970c57c4b31e186d967933da0ffa0d7c Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Sun, 23 Sep 2012 17:28:25 -0600 Subject: ARM: OMAP2+: gpmc: minimal driver support Create a minimal driver out of gpmc code. Responsibilities handled by earlier gpmc initialization is now achieved in probe. Signed-off-by: Afzal Mohammed Reviewed-by: Jon Hunter [paul@pwsan.com: fixed some checkpatch messages] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 396ce77..8ab1e1b 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -86,6 +87,12 @@ #define ENABLE_PREFETCH (0x1 << 7) #define DMA_MPU_MODE 2 +#define GPMC_REVISION_MAJOR(l) ((l >> 4) & 0xf) +#define GPMC_REVISION_MINOR(l) (l & 0xf) + +#define GPMC_HAS_WR_ACCESS 0x1 +#define GPMC_HAS_WR_DATA_MUX_BUS 0x2 + /* XXX: Only NAND irq has been considered,currently these are the only ones used */ #define GPMC_NR_IRQ 2 @@ -131,7 +138,10 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); static unsigned int gpmc_cs_map; /* flag for cs which are initialized */ static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */ - +static struct device *gpmc_dev; +static int gpmc_irq; +static resource_size_t phys_base, mem_size; +static unsigned gpmc_capability; static void __iomem *gpmc_base; static struct clk *gpmc_l3_clk; @@ -321,10 +331,10 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access); - if (cpu_is_omap34xx()) { + if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS) GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus); + if (gpmc_capability & GPMC_HAS_WR_ACCESS) GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access); - } /* caller is expected to have initialized CONFIG1 to cover * at least sync vs async @@ -434,6 +444,20 @@ static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size) return r; } +static int gpmc_cs_delete_mem(int cs) +{ + struct resource *res = &gpmc_cs_mem[cs]; + int r; + + spin_lock(&gpmc_mem_lock); + r = release_resource(&gpmc_cs_mem[cs]); + res->start = 0; + res->end = 0; + spin_unlock(&gpmc_mem_lock); + + return r; +} + int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) { struct resource *res = &gpmc_cs_mem[cs]; @@ -770,7 +794,7 @@ static void gpmc_irq_noop(struct irq_data *data) { } static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; } -static int gpmc_setup_irq(int gpmc_irq) +static int gpmc_setup_irq(void) { int i; u32 regval; @@ -814,7 +838,37 @@ static int gpmc_setup_irq(int gpmc_irq) return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL); } -static void __init gpmc_mem_init(void) +static __exit int gpmc_free_irq(void) +{ + int i; + + if (gpmc_irq) + free_irq(gpmc_irq, NULL); + + for (i = 0; i < GPMC_NR_IRQ; i++) { + irq_set_handler(gpmc_client_irq[i].irq, NULL); + irq_set_chip(gpmc_client_irq[i].irq, &no_irq_chip); + irq_modify_status(gpmc_client_irq[i].irq, 0, 0); + } + + irq_free_descs(gpmc_irq_start, GPMC_NR_IRQ); + + return 0; +} + +static void __devexit gpmc_mem_exit(void) +{ + int cs; + + for (cs = 0; cs < GPMC_CS_NUM; cs++) { + if (!gpmc_cs_mem_enabled(cs)) + continue; + gpmc_cs_delete_mem(cs); + } + +} + +static void __devinit gpmc_mem_init(void) { int cs; unsigned long boot_rom_space = 0; @@ -841,65 +895,85 @@ static void __init gpmc_mem_init(void) } } -static int __init gpmc_init(void) +static __devinit int gpmc_probe(struct platform_device *pdev) { u32 l; - int ret = -EINVAL; - int gpmc_irq; - char *ck = NULL; - - if (cpu_is_omap24xx()) { - ck = "core_l3_ck"; - if (cpu_is_omap2420()) - l = OMAP2420_GPMC_BASE; - else - l = OMAP34XX_GPMC_BASE; - gpmc_irq = 20 + OMAP_INTC_START; - } else if (cpu_is_omap34xx()) { - ck = "gpmc_fck"; - l = OMAP34XX_GPMC_BASE; - gpmc_irq = 20 + OMAP_INTC_START; - } else if (cpu_is_omap44xx() || soc_is_omap54xx()) { - /* Base address and irq number are same for OMAP4/5 */ - ck = "gpmc_ck"; - l = OMAP44XX_GPMC_BASE; - gpmc_irq = 20 + OMAP44XX_IRQ_GIC_START; - } + struct resource *res; - if (WARN_ON(!ck)) - return ret; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) + return -ENOENT; - gpmc_l3_clk = clk_get(NULL, ck); - if (IS_ERR(gpmc_l3_clk)) { - printk(KERN_ERR "Could not get GPMC clock %s\n", ck); - BUG(); - } + phys_base = res->start; + mem_size = resource_size(res); - gpmc_base = ioremap(l, SZ_4K); + gpmc_base = devm_request_and_ioremap(&pdev->dev, res); if (!gpmc_base) { - clk_put(gpmc_l3_clk); - printk(KERN_ERR "Could not get GPMC register memory\n"); - BUG(); + dev_err(&pdev->dev, "error: request memory / ioremap\n"); + return -EADDRNOTAVAIL; + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) + dev_warn(&pdev->dev, "Failed to get resource: irq\n"); + else + gpmc_irq = res->start; + + gpmc_l3_clk = clk_get(&pdev->dev, "fck"); + if (IS_ERR(gpmc_l3_clk)) { + dev_err(&pdev->dev, "error: clk_get\n"); + gpmc_irq = 0; + return PTR_ERR(gpmc_l3_clk); } clk_prepare_enable(gpmc_l3_clk); + gpmc_dev = &pdev->dev; + l = gpmc_read_reg(GPMC_REVISION); - printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); - /* Set smart idle mode and automatic L3 clock gating */ - l = gpmc_read_reg(GPMC_SYSCONFIG); - l &= 0x03 << 3; - l |= (0x02 << 3) | (1 << 0); - gpmc_write_reg(GPMC_SYSCONFIG, l); + if (GPMC_REVISION_MAJOR(l) > 0x4) + gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS; + dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l), + GPMC_REVISION_MINOR(l)); + gpmc_mem_init(); - ret = gpmc_setup_irq(gpmc_irq); - if (ret) - pr_err("gpmc: irq-%d could not claim: err %d\n", - gpmc_irq, ret); - return ret; + if (IS_ERR_VALUE(gpmc_setup_irq())) + dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); + + return 0; +} + +static __exit int gpmc_remove(struct platform_device *pdev) +{ + gpmc_free_irq(); + gpmc_mem_exit(); + gpmc_dev = NULL; + return 0; +} + +static struct platform_driver gpmc_driver = { + .probe = gpmc_probe, + .remove = __devexit_p(gpmc_remove), + .driver = { + .name = DEVICE_NAME, + .owner = THIS_MODULE, + }, +}; + +static __init int gpmc_init(void) +{ + return platform_driver_register(&gpmc_driver); +} + +static __exit void gpmc_exit(void) +{ + platform_driver_unregister(&gpmc_driver); + } + postcore_initcall(gpmc_init); +module_exit(gpmc_exit); static int __init omap_gpmc_init(void) { -- cgit v0.10.2 From e9b0a2fb0af562092aab1b56abf9d13f1abc7381 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sun, 23 Sep 2012 17:28:25 -0600 Subject: ARM: OMAP2xxx: hwmod/CM: add RNG integration data Add integration data for the hardware random number generator IP block on some OMAP SoCs. This appears to be present on at least OMAP2xxx and OMAP3xxx SoCs, although it is not so easy to tell. It may also be present on other OMAP2+ SoCs. Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c index a911e76..7f07ab0 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c @@ -35,7 +35,7 @@ #define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3 static const u8 cm_idlest_offs[] = { - CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3 + CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4 }; u32 omap2_cm_read_mod_reg(s16 module, u16 idx) diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h index 088bbad..57b2f3c 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h @@ -71,6 +71,7 @@ #define OMAP24XX_CM_FCLKEN2 0x0004 #define OMAP24XX_CM_ICLKEN4 0x001c #define OMAP24XX_CM_AUTOIDLE4 0x003c +#define OMAP24XX_CM_IDLEST4 0x002c #define OMAP2430_CM_IDLEST3 0x0028 diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 5fcd225..e778ff4 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -601,6 +601,7 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2420_l4_core__mcbsp1, &omap2420_l4_core__mcbsp2, &omap2420_l4_core__msdi1, + &omap2xxx_l4_core__rng, &omap2420_l4_core__hdq1w, &omap2420_l4_wkup__counter_32k, &omap2420_l3__gpmc, diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index a560563..cc4ed90 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -961,6 +961,7 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { &omap2430_l4_core__mcbsp4, &omap2430_l4_core__mcbsp5, &omap2430_l4_core__hdq1w, + &omap2xxx_l4_core__rng, &omap2430_l4_wkup__counter_32k, &omap2430_l3__gpmc, NULL, diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c index 5178e40..c83d6c5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c @@ -129,6 +129,15 @@ struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[] = { { } }; +static struct omap_hwmod_addr_space omap2_rng_addr_space[] = { + { + .pa_start = 0x480a0000, + .pa_end = 0x480a004f, + .flags = ADDR_TYPE_RT + }, + { } +}; + /* * Common interconnect data */ @@ -372,3 +381,11 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_core -> rng */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__rng = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_rng_hwmod, + .clk = "rng_ick", + .addr = omap2_rng_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 3c00906..32c778b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -792,3 +792,47 @@ struct omap_hwmod omap2xxx_gpmc_hwmod = { }, }, }; + +/* RNG */ + +static struct omap_hwmod_class_sysconfig omap2_rng_sysc = { + .rev_offs = 0x3c, + .sysc_offs = 0x40, + .syss_offs = 0x44, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2_rng_hwmod_class = { + .name = "rng", + .sysc = &omap2_rng_sysc, +}; + +static struct omap_hwmod_irq_info omap2_rng_mpu_irqs[] = { + { .irq = 52 }, + { .irq = -1 } +}; + +struct omap_hwmod omap2xxx_rng_hwmod = { + .name = "rng", + .mpu_irqs = omap2_rng_mpu_irqs, + .main_clk = "l4_ck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 4, + .module_bit = OMAP24XX_EN_RNG_SHIFT, + .idlest_reg_id = 4, + .idlest_idle_bit = OMAP24XX_ST_RNG_SHIFT, + }, + }, + /* + * XXX The first read from the SYSSTATUS register of the RNG + * after the SYSCONFIG SOFTRESET bit is set triggers an + * imprecise external abort. It's unclear why this happens. + * Until this is analyzed, skip the IP block reset. + */ + .flags = HWMOD_INIT_NO_RESET, + .class = &omap2_rng_hwmod_class, +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 6a033b8..2bc8f17 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -2,9 +2,8 @@ * omap_hwmod_common_data.h - OMAP hwmod common macros and declarations * * Copyright (C) 2010-2011 Nokia Corporation + * Copyright (C) 2010-2012 Texas Instruments, Inc. * Paul Walmsley - * - * Copyright (C) 2010-2011 Texas Instruments, Inc. * Benoît Cousson * * This program is free software; you can redistribute it and/or modify @@ -78,6 +77,7 @@ extern struct omap_hwmod omap2xxx_mcspi1_hwmod; extern struct omap_hwmod omap2xxx_mcspi2_hwmod; extern struct omap_hwmod omap2xxx_counter_32k_hwmod; extern struct omap_hwmod omap2xxx_gpmc_hwmod; +extern struct omap_hwmod omap2xxx_rng_hwmod; /* Common interface data across OMAP2xxx */ extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core; @@ -104,6 +104,7 @@ extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss; extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc; extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi; extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__rng; /* Common IP block data */ extern struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[]; -- cgit v0.10.2 From 02666360c92af7885c47163f936b58dc86213a53 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sun, 23 Sep 2012 17:28:26 -0600 Subject: hwrng: OMAP: store per-device data in per-device variables, not file statics Encapsulate all of the RNG per-device state into a single per-device structure record, as opposed to a set of per-driver file variables. Signed-off-by: Paul Walmsley Cc: Matt Mackall Cc: Herbert Xu Acked-by: Herbert Xu diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index 4fbdceb..e0f0b98 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -23,6 +23,7 @@ #include #include #include +#include #include @@ -46,26 +47,38 @@ #define RNG_SYSSTATUS 0x44 /* System status [0] = RESETDONE */ -static void __iomem *rng_base; -static struct clk *rng_ick; -static struct platform_device *rng_dev; +/** + * struct omap_rng_private_data - RNG IP block-specific data + * @base: virtual address of the beginning of the RNG IP block registers + * @clk: RNG clock + * @mem_res: struct resource * for the IP block registers physical memory + */ +struct omap_rng_private_data { + void __iomem *base; + struct clk *clk; + struct resource *mem_res; +}; -static inline u32 omap_rng_read_reg(int reg) +static inline u32 omap_rng_read_reg(struct omap_rng_private_data *priv, int reg) { - return __raw_readl(rng_base + reg); + return __raw_readl(priv->base + reg); } -static inline void omap_rng_write_reg(int reg, u32 val) +static inline void omap_rng_write_reg(struct omap_rng_private_data *priv, + int reg, u32 val) { - __raw_writel(val, rng_base + reg); + __raw_writel(val, priv->base + reg); } static int omap_rng_data_present(struct hwrng *rng, int wait) { + struct omap_rng_private_data *priv; int data, i; + priv = (struct omap_rng_private_data *)rng->priv; + for (i = 0; i < 20; i++) { - data = omap_rng_read_reg(RNG_STAT_REG) ? 0 : 1; + data = omap_rng_read_reg(priv, RNG_STAT_REG) ? 0 : 1; if (data || !wait) break; /* RNG produces data fast enough (2+ MBit/sec, even @@ -80,9 +93,13 @@ static int omap_rng_data_present(struct hwrng *rng, int wait) static int omap_rng_data_read(struct hwrng *rng, u32 *data) { - *data = omap_rng_read_reg(RNG_OUT_REG); + struct omap_rng_private_data *priv; + + priv = (struct omap_rng_private_data *)rng->priv; + + *data = omap_rng_read_reg(priv, RNG_OUT_REG); - return 4; + return sizeof(u32); } static struct hwrng omap_rng_ops = { @@ -93,69 +110,85 @@ static struct hwrng omap_rng_ops = { static int __devinit omap_rng_probe(struct platform_device *pdev) { - struct resource *res; + struct omap_rng_private_data *priv; int ret; - /* - * A bit ugly, and it will never actually happen but there can - * be only one RNG and this catches any bork - */ - if (rng_dev) - return -EBUSY; + priv = kzalloc(sizeof(struct omap_rng_private_data), GFP_KERNEL); + if (!priv) { + dev_err(&pdev->dev, "could not allocate memory\n"); + return -ENOMEM; + }; + + omap_rng_ops.priv = (unsigned long)priv; + dev_set_drvdata(&pdev->dev, priv); if (cpu_is_omap24xx()) { - rng_ick = clk_get(&pdev->dev, "ick"); - if (IS_ERR(rng_ick)) { + priv->clk = clk_get(&pdev->dev, "ick"); + if (IS_ERR(priv->clk)) { dev_err(&pdev->dev, "Could not get rng_ick\n"); - ret = PTR_ERR(rng_ick); + ret = PTR_ERR(priv->clk); return ret; - } else - clk_enable(rng_ick); + } else { + clk_enable(priv->clk); + } } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!priv->mem_res) { + ret = -ENOENT; + goto err_ioremap; + } - rng_base = devm_request_and_ioremap(&pdev->dev, res); - if (!rng_base) { + priv->base = devm_request_and_ioremap(&pdev->dev, priv->mem_res); + if (!priv->base) { ret = -ENOMEM; goto err_ioremap; } - dev_set_drvdata(&pdev->dev, res); + dev_set_drvdata(&pdev->dev, priv); ret = hwrng_register(&omap_rng_ops); if (ret) goto err_register; dev_info(&pdev->dev, "OMAP Random Number Generator ver. %02x\n", - omap_rng_read_reg(RNG_REV_REG)); - omap_rng_write_reg(RNG_MASK_REG, 0x1); + omap_rng_read_reg(priv, RNG_REV_REG)); + - rng_dev = pdev; + omap_rng_write_reg(priv, RNG_MASK_REG, 0x1); return 0; err_register: - rng_base = NULL; + priv->base = NULL; err_ioremap: if (cpu_is_omap24xx()) { - clk_disable(rng_ick); - clk_put(rng_ick); + clk_disable(priv->clk); + clk_put(priv->clk); } + + kfree(priv); + return ret; } static int __exit omap_rng_remove(struct platform_device *pdev) { + struct omap_rng_private_data *priv = dev_get_drvdata(&pdev->dev); + hwrng_unregister(&omap_rng_ops); - omap_rng_write_reg(RNG_MASK_REG, 0x0); + omap_rng_write_reg(priv, RNG_MASK_REG, 0x0); + + iounmap(priv->base); if (cpu_is_omap24xx()) { - clk_disable(rng_ick); - clk_put(rng_ick); + clk_disable(priv->clk); + clk_put(priv->clk); } - rng_base = NULL; + release_mem_region(priv->mem_res->start, resource_size(priv->mem_res)); + + kfree(priv); return 0; } @@ -164,13 +197,19 @@ static int __exit omap_rng_remove(struct platform_device *pdev) static int omap_rng_suspend(struct device *dev) { - omap_rng_write_reg(RNG_MASK_REG, 0x0); + struct omap_rng_private_data *priv = dev_get_drvdata(dev); + + omap_rng_write_reg(priv, RNG_MASK_REG, 0x0); + return 0; } static int omap_rng_resume(struct device *dev) { - omap_rng_write_reg(RNG_MASK_REG, 0x1); + struct omap_rng_private_data *priv = dev_get_drvdata(dev); + + omap_rng_write_reg(priv, RNG_MASK_REG, 0x1); + return 0; } -- cgit v0.10.2 From 665d92fa85b5cb4c0a3f36524ac6cc8f9e3d9c2d Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sun, 23 Sep 2012 17:28:26 -0600 Subject: hwrng: OMAP: convert to use runtime PM Convert the OMAP onboard hardware RNG driver to use runtime PM. This allows us to remove some OMAP-specific cpu_is_omap*() calls from the RNG driver. Signed-off-by: Paul Walmsley Cc: Matt Mackall Cc: Herbert Xu Acked-by: Herbert Xu diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index e0f0b98..748fcc8 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -18,12 +18,12 @@ #include #include #include -#include #include #include #include #include #include +#include #include @@ -50,12 +50,10 @@ /** * struct omap_rng_private_data - RNG IP block-specific data * @base: virtual address of the beginning of the RNG IP block registers - * @clk: RNG clock * @mem_res: struct resource * for the IP block registers physical memory */ struct omap_rng_private_data { void __iomem *base; - struct clk *clk; struct resource *mem_res; }; @@ -122,17 +120,6 @@ static int __devinit omap_rng_probe(struct platform_device *pdev) omap_rng_ops.priv = (unsigned long)priv; dev_set_drvdata(&pdev->dev, priv); - if (cpu_is_omap24xx()) { - priv->clk = clk_get(&pdev->dev, "ick"); - if (IS_ERR(priv->clk)) { - dev_err(&pdev->dev, "Could not get rng_ick\n"); - ret = PTR_ERR(priv->clk); - return ret; - } else { - clk_enable(priv->clk); - } - } - priv->mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!priv->mem_res) { ret = -ENOENT; @@ -146,6 +133,9 @@ static int __devinit omap_rng_probe(struct platform_device *pdev) } dev_set_drvdata(&pdev->dev, priv); + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + ret = hwrng_register(&omap_rng_ops); if (ret) goto err_register; @@ -153,19 +143,14 @@ static int __devinit omap_rng_probe(struct platform_device *pdev) dev_info(&pdev->dev, "OMAP Random Number Generator ver. %02x\n", omap_rng_read_reg(priv, RNG_REV_REG)); - omap_rng_write_reg(priv, RNG_MASK_REG, 0x1); return 0; err_register: priv->base = NULL; + pm_runtime_disable(&pdev->dev); err_ioremap: - if (cpu_is_omap24xx()) { - clk_disable(priv->clk); - clk_put(priv->clk); - } - kfree(priv); return ret; @@ -179,12 +164,8 @@ static int __exit omap_rng_remove(struct platform_device *pdev) omap_rng_write_reg(priv, RNG_MASK_REG, 0x0); - iounmap(priv->base); - - if (cpu_is_omap24xx()) { - clk_disable(priv->clk); - clk_put(priv->clk); - } + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); release_mem_region(priv->mem_res->start, resource_size(priv->mem_res)); @@ -200,6 +181,7 @@ static int omap_rng_suspend(struct device *dev) struct omap_rng_private_data *priv = dev_get_drvdata(dev); omap_rng_write_reg(priv, RNG_MASK_REG, 0x0); + pm_runtime_put_sync(dev); return 0; } @@ -208,6 +190,7 @@ static int omap_rng_resume(struct device *dev) { struct omap_rng_private_data *priv = dev_get_drvdata(dev); + pm_runtime_get_sync(dev); omap_rng_write_reg(priv, RNG_MASK_REG, 0x1); return 0; -- cgit v0.10.2 From 4848d460a7d4b2b5b22afda16b713cb753affa12 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sun, 23 Sep 2012 17:28:27 -0600 Subject: ARM: OMAP: split OMAP1, OMAP2+ RNG device registration Move the OMAP1-specific RNG device creation off to mach-omap1/devices.c, and create a omap_device-backed registration function for OMAP2+ devices in mach-omap2/devices.c. As a nice side-benefit, we can also get rid of arch/arm/plat-omap/devices.c, thanks to some recent changes from Tony. One change from the previous behavior is that the RNG devices are now registered unconditionally. This should allow the RNG drivers to be loaded as modules, even if the original kernel was not built that way. Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 05fdbd9..23a0b11 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -357,6 +357,30 @@ static inline void omap_init_uwire(void) {} #endif +#define OMAP1_RNG_BASE 0xfffe5000 + +static struct resource omap1_rng_resources[] = { + { + .start = OMAP1_RNG_BASE, + .end = OMAP1_RNG_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap1_rng_device = { + .name = "omap_rng", + .id = -1, + .num_resources = ARRAY_SIZE(omap1_rng_resources), + .resource = omap1_rng_resources, +}; + +static void omap1_init_rng(void) +{ + (void) platform_device_register(&omap1_rng_device); +} + +/*-------------------------------------------------------------------------*/ + /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): @@ -395,6 +419,7 @@ static int __init omap1_init_devices(void) omap_init_spi100k(); omap_init_sti(); omap_init_uwire(); + omap1_init_rng(); return 0; } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 6ef4010..33bdbe4 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -462,6 +462,23 @@ static void omap_init_pmu(void) platform_device_register(&omap_pmu_device); } +/** + * omap_init_rng - bind the RNG hwmod to the RNG omap_device + * + * Bind the RNG hwmod to the RNG omap_device. No return value. + */ +static void omap_init_rng(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + + oh = omap_hwmod_lookup("rng"); + if (!oh) + return; + + pdev = omap_device_build("omap_rng", -1, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for omap_rng\n"); +} #if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE) @@ -649,6 +666,7 @@ static int __init omap2_init_devices(void) } omap_init_pmu(); omap_init_sti(); + omap_init_rng(); omap_init_sham(); omap_init_aes(); omap_init_vout(); -- cgit v0.10.2 From fe47c58ba82c967729c76869a5f10a94c38754f3 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sun, 23 Sep 2012 17:28:27 -0600 Subject: hwrng: OMAP: remove SoC restrictions from driver registration Remove the SoC restriction code from the OMAP RNG driver. The integration code in arch/arm/*omap* should handle this. The device shouldn't be created if it doesn't exist on the currently-booted SoC. This allows us to remove some OMAP-specific cpu_is_omap*() calls from the driver. Also, if other OMAP chips have RNGs that can be used by Linux, there will be no need to modify the driver. Signed-off-by: Paul Walmsley Cc: Matt Mackall Cc: Herbert Xu Acked-by: Herbert Xu diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 23a0b11..7a5a328 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -376,6 +376,9 @@ static struct platform_device omap1_rng_device = { static void omap1_init_rng(void) { + if (!cpu_is_omap16xx()) + return; + (void) platform_device_register(&omap1_rng_device); } diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index 748fcc8..a5effd8 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -220,9 +220,6 @@ static struct platform_driver omap_rng_driver = { static int __init omap_rng_init(void) { - if (!cpu_is_omap16xx() && !cpu_is_omap24xx()) - return -ENODEV; - return platform_driver_register(&omap_rng_driver); } -- cgit v0.10.2 From 5c3e4ec48586f6dfb482f1c524748948ba14021e Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Sun, 23 Sep 2012 17:28:27 -0600 Subject: ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP Some instances of the DMTIMER peripheral on OMAP devices have the ability to interrupt the on-chip DSP in addition to the ARM CPU. Add a DMTIMER attribute to indicate which timers can interrupt the DSP. By using the omap_dm_timer_request_by_cap() API, driver will now be able to allocate a DMTIMER that can interrupt the DSP based upon this attribute and not require the driver to know which instance has this capability. DMTIMERs that have the ability to interrupt the DSP on OMAP devices are as follows ... - OMAP1 (OMAP5912/16xx/17xx) devices - All 8 DMTIMERs - OMAP2/3/4 devices - DMTIMERs 5-8 Please note that for OMAP3+, timer8 has the ability to interrupt the DSP and generate a PWM output. Signed-off-by: Jon Hunter Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index aa81593..cdeb9d3 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -141,7 +141,7 @@ static int __init omap1_dm_timer_init(void) pdata->set_timer_src = omap1_dm_timer_set_src; pdata->timer_capability = OMAP_TIMER_ALWON | - OMAP_TIMER_NEEDS_RESET; + OMAP_TIMER_NEEDS_RESET | OMAP_TIMER_HAS_DSP_IRQ; ret = platform_device_add_data(pdev, pdata, sizeof(*pdata)); if (ret) { diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 32c778b..de39017 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -240,6 +240,11 @@ static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = { .timer_capability = OMAP_TIMER_HAS_PWM, }; +/* timers with DSP interrupt dev attribute */ +static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = { + .timer_capability = OMAP_TIMER_HAS_DSP_IRQ, +}; + /* timer1 */ struct omap_hwmod omap2xxx_timer1_hwmod = { @@ -328,6 +333,7 @@ struct omap_hwmod omap2xxx_timer5_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT, }, }, + .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -346,6 +352,7 @@ struct omap_hwmod omap2xxx_timer6_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT, }, }, + .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -364,6 +371,7 @@ struct omap_hwmod omap2xxx_timer7_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT, }, }, + .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; @@ -382,6 +390,7 @@ struct omap_hwmod omap2xxx_timer8_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT, }, }, + .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index da6eca0f..5ef9007 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -171,6 +171,16 @@ static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = { .timer_capability = OMAP_TIMER_HAS_PWM, }; +/* timers with DSP interrupt dev attribute */ +static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = { + .timer_capability = OMAP_TIMER_HAS_DSP_IRQ, +}; + +/* pwm timers with DSP interrupt dev attribute */ +static struct omap_timer_capability_dev_attr capability_dsp_pwm_dev_attr = { + .timer_capability = OMAP_TIMER_HAS_DSP_IRQ | OMAP_TIMER_HAS_PWM, +}; + /* timer1 */ static struct omap_hwmod omap3xxx_timer1_hwmod = { .name = "timer1", @@ -254,6 +264,7 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT, }, }, + .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; @@ -271,6 +282,7 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT, }, }, + .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; @@ -288,6 +300,7 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT, }, }, + .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; @@ -305,7 +318,7 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT, }, }, - .dev_attr = &capability_pwm_dev_attr, + .dev_attr = &capability_dsp_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 46fd80c..17ab2db 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3097,6 +3097,16 @@ static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = { .timer_capability = OMAP_TIMER_HAS_PWM, }; +/* timers with DSP interrupt dev attribute */ +static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = { + .timer_capability = OMAP_TIMER_HAS_DSP_IRQ, +}; + +/* pwm timers with DSP interrupt dev attribute */ +static struct omap_timer_capability_dev_attr capability_dsp_pwm_dev_attr = { + .timer_capability = OMAP_TIMER_HAS_DSP_IRQ | OMAP_TIMER_HAS_PWM, +}; + /* timer1 */ static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = { { .irq = 37 + OMAP44XX_IRQ_GIC_START }, @@ -3201,6 +3211,7 @@ static struct omap_hwmod omap44xx_timer5_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_dsp_dev_attr, }; /* timer6 */ @@ -3223,6 +3234,7 @@ static struct omap_hwmod omap44xx_timer6_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_dsp_dev_attr, }; /* timer7 */ @@ -3244,6 +3256,7 @@ static struct omap_hwmod omap44xx_timer7_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_dsp_dev_attr, }; /* timer8 */ @@ -3265,7 +3278,7 @@ static struct omap_hwmod omap44xx_timer8_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &capability_pwm_dev_attr, + .dev_attr = &capability_dsp_pwm_dev_attr, }; /* timer9 */ diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 19e7fa5..85868e9 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -60,6 +60,7 @@ #define OMAP_TIMER_ALWON 0x40000000 #define OMAP_TIMER_HAS_PWM 0x20000000 #define OMAP_TIMER_NEEDS_RESET 0x10000000 +#define OMAP_TIMER_HAS_DSP_IRQ 0x08000000 struct omap_timer_capability_dev_attr { u32 timer_capability; -- cgit v0.10.2 From b71c72178e24118214f21567a15adcad61b4238a Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sun, 23 Sep 2012 17:28:28 -0600 Subject: ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The idle status of the IP blocks and clocks inside the EMU clockdomain isn't taken into account by the PRCM hardware when deciding whether the clockdomain is idle. Add a workaround flag in the clockdomain code, CLKDM_MISSING_IDLE_REPORTING, to deal with this problem, and add the code necessary to support it. If CLKDM_MISSING_IDLE_REPORTING is set on a clockdomain, the clockdomain will be forced active whenever an IP block inside that clockdomain is in use, even if the clockdomain supports hardware-supervised idle. When the kernel indicates that the last active IP block inside the clockdomain is no longer used, the clockdomain will be forced idle, or, if that mode is not supported in the hardware, it will be placed into hardware-supervised idle. This patch is an equal collaboration with Jon Hunter . Ming Lei , Will Deacon , Madhav Vij , Kevin Hilman , Benoît Cousson , and Santosh Shilimkar all made essential contributions to the understanding of EMU clockdomain power management on OMAP. Signed-off-by: Paul Walmsley Cc: Jon Hunter Cc: Ming Lei Cc: Will Deacon Cc: Madhav Vij Cc: Kevin Hilman Cc: Benoît Cousson Cc: Santosh Shilimkar Tested-by: Jon Hunter diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index a155562..cbb8791 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -899,6 +899,23 @@ bool clkdm_in_hwsup(struct clockdomain *clkdm) return ret; } +/** + * clkdm_missing_idle_reporting - can @clkdm enter autoidle even if in use? + * @clkdm: struct clockdomain * + * + * Returns true if clockdomain @clkdm has the + * CLKDM_MISSING_IDLE_REPORTING flag set, or false if not or @clkdm is + * null. More information is available in the documentation for the + * CLKDM_MISSING_IDLE_REPORTING macro. + */ +bool clkdm_missing_idle_reporting(struct clockdomain *clkdm) +{ + if (!clkdm) + return false; + + return (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) ? true : false; +} + /* Clockdomain-to-clock/hwmod framework interface code */ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 5601dc1..629576b 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -1,9 +1,7 @@ /* - * arch/arm/plat-omap/include/mach/clockdomain.h - * * OMAP2/3 clockdomain framework functions * - * Copyright (C) 2008 Texas Instruments, Inc. + * Copyright (C) 2008, 2012 Texas Instruments, Inc. * Copyright (C) 2008-2011 Nokia Corporation * * Paul Walmsley @@ -34,6 +32,20 @@ * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is * active whenever the MPU is active. True for interconnects and * the WKUP clockdomains. + * CLKDM_MISSING_IDLE_REPORTING: The idle status of the IP blocks and + * clocks inside this clockdomain are not taken into account by + * the PRCM when determining whether the clockdomain is idle. + * Without this flag, if the clockdomain is set to + * hardware-supervised idle mode, the PRCM may transition the + * enclosing powerdomain to a low power state, even when devices + * inside the clockdomain and powerdomain are in use. (An example + * of such a clockdomain is the EMU clockdomain on OMAP3/4.) If + * this flag is set, and the clockdomain does not support the + * force-sleep mode, then the HW_AUTO mode will be used to put the + * clockdomain to sleep. Similarly, if the clockdomain supports + * the force-wakeup mode, then it will be used whenever a clock or + * IP block inside the clockdomain is active, rather than the + * HW_AUTO mode. */ #define CLKDM_CAN_FORCE_SLEEP (1 << 0) #define CLKDM_CAN_FORCE_WAKEUP (1 << 1) @@ -41,6 +53,7 @@ #define CLKDM_CAN_DISABLE_AUTO (1 << 3) #define CLKDM_NO_AUTODEPS (1 << 4) #define CLKDM_ACTIVE_WITH_MPU (1 << 5) +#define CLKDM_MISSING_IDLE_REPORTING (1 << 6) #define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO) #define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP) @@ -187,6 +200,7 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm); void clkdm_allow_idle(struct clockdomain *clkdm); void clkdm_deny_idle(struct clockdomain *clkdm); bool clkdm_in_hwsup(struct clockdomain *clkdm); +bool clkdm_missing_idle_reporting(struct clockdomain *clkdm); int clkdm_wakeup(struct clockdomain *clkdm); int clkdm_sleep(struct clockdomain *clkdm); diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index f99e65c..9a7792a 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -162,6 +162,19 @@ static void _disable_hwsup(struct clockdomain *clkdm) clkdm->clktrctrl_mask); } +static int omap3_clkdm_sleep(struct clockdomain *clkdm) +{ + omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + return 0; +} + +static int omap3_clkdm_wakeup(struct clockdomain *clkdm) +{ + omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + return 0; +} static int omap2_clkdm_clk_enable(struct clockdomain *clkdm) { @@ -170,6 +183,17 @@ static int omap2_clkdm_clk_enable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && + !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { + _enable_hwsup(clkdm); + return 0; + } + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); @@ -193,6 +217,17 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) && + (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { + omap3_clkdm_wakeup(clkdm); + return 0; + } + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); @@ -209,20 +244,6 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm) return 0; } -static int omap3_clkdm_sleep(struct clockdomain *clkdm) -{ - omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - return 0; -} - -static int omap3_clkdm_wakeup(struct clockdomain *clkdm) -{ - omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - return 0; -} - static void omap3_clkdm_allow_idle(struct clockdomain *clkdm) { if (atomic_read(&clkdm->usecount) > 0) diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c index 762f2cc..6fc6155 100644 --- a/arch/arm/mach-omap2/clockdomain44xx.c +++ b/arch/arm/mach-omap2/clockdomain44xx.c @@ -113,6 +113,17 @@ static int omap4_clkdm_clk_disable(struct clockdomain *clkdm) if (!clkdm->prcm_partition) return 0; + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && + !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { + omap4_clkdm_allow_idle(clkdm); + return 0; + } + hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition, clkdm->cm_inst, clkdm->clkdm_offs); diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c index 56089c4..933a35c 100644 --- a/arch/arm/mach-omap2/clockdomains3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c @@ -387,14 +387,11 @@ static struct clockdomain per_am35x_clkdm = { .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, }; -/* - * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is - * switched of even if sdti is in use - */ static struct clockdomain emu_clkdm = { .name = "emu_clkdm", .pwrdm = { .name = "emu_pwrdm" }, - .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP, + .flags = (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP | + CLKDM_MISSING_IDLE_REPORTING), .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK, }; diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 63d60a7..b56d06b 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -390,7 +390,8 @@ static struct clockdomain emu_sys_44xx_clkdm = { .prcm_partition = OMAP4430_PRM_PARTITION, .cm_inst = OMAP4430_PRM_EMU_CM_INST, .clkdm_offs = OMAP4430_PRM_EMU_CM_EMU_CDOFFS, - .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP, + .flags = (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP | + CLKDM_MISSING_IDLE_REPORTING), }; static struct clockdomain l3_dma_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2129987..6af64bb 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2007,7 +2007,8 @@ static int _enable(struct omap_hwmod *oh) * completely the module. The clockdomain can be set * in HW_AUTO only when the module become ready. */ - hwsup = clkdm_in_hwsup(oh->clkdm); + hwsup = clkdm_in_hwsup(oh->clkdm) && + !clkdm_missing_idle_reporting(oh->clkdm); r = clkdm_hwmod_enable(oh->clkdm, oh); if (r) { WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n", diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index f6f05b6..abefbc4 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -80,7 +80,8 @@ static void __init omap2_init_processor_devices(void) int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) { - if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) + if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) && + !(clkdm->flags & CLKDM_MISSING_IDLE_REPORTING)) clkdm_allow_idle(clkdm); else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && atomic_read(&clkdm->usecount) == 0) -- cgit v0.10.2 From c7dad45f351e9bea8ebaa974f01b01c8f69432b4 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Sun, 23 Sep 2012 17:28:28 -0600 Subject: ARM: OMAP3: hwmod data: Add debugss HWMOD data To enable PMU with runtime PM support on OMAP3 devices we need to be able to dynamically enable and disable the debug sub-system at runtime. By adding HWMOD data for the debug sub-system for OMAP3, we can build the PMU device using the debug sub-system HWMOD and control this power domain using runtime PM. Reviewed-by: Benoit Cousson Signed-off-by: Jon Hunter [paul@pwsan.com: updated to apply; added L4-EMU address space] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 5ef9007..ffc0142 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -124,6 +124,24 @@ static struct omap_hwmod omap3xxx_iva_hwmod = { }, }; +/* + * 'debugss' class + * debug and emulation sub system + */ + +static struct omap_hwmod_class omap3xxx_debugss_hwmod_class = { + .name = "debugss", +}; + +/* debugss */ +static struct omap_hwmod omap3xxx_debugss_hwmod = { + .name = "debugss", + .class = &omap3xxx_debugss_hwmod_class, + .clkdm_name = "emu_clkdm", + .main_clk = "emu_src_ck", + .flags = HWMOD_NO_IDLEST, +}; + /* timer class */ static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = { .rev_offs = 0x0000, @@ -2186,6 +2204,23 @@ static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = { .user = OCP_USER_MPU, }; +static struct omap_hwmod_addr_space omap3xxx_l4_emu_addrs[] = { + { + .pa_start = 0x54000000, + .pa_end = 0x547fffff, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l3 -> debugss */ +static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_debugss = { + .master = &omap3xxx_l3_main_hwmod, + .slave = &omap3xxx_debugss_hwmod, + .addr = &omap3xxx_l4_emu_hwmod, + .user = OCP_USER_MPU, +}; + /* DSS -> l3 */ static struct omap_hwmod_ocp_if omap3430es1_dss__l3 = { .master = &omap3430es1_dss_core_hwmod, @@ -3506,6 +3541,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l3_main__l4_core, &omap3xxx_l3_main__l4_per, &omap3xxx_mpu__l3_main, + &omap3xxx_l3_main__l4_debugss, &omap3xxx_l4_core__l4_wkup, &omap3xxx_l4_core__mmc3, &omap3_l4_core__uart1, -- cgit v0.10.2 From ee75d95cea05bd4f42a5db7b17dd8529d25beddd Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Sun, 23 Sep 2012 17:28:29 -0600 Subject: ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD Convert OMAP2/3 devices to use HWMOD for creating a PMU device. To support PMU on OMAP2 devices we only need to use MPU sub-system and so we can simply use the MPU HWMOD to create the PMU device. To support PMU on OMAP3 devices, we need to use the MPU and DEBUG sub-systems and so use these HWMODs to create the PMU device for OMAP3. The MPU HWMOD for OMAP2/3 devices is currently missing the PMU interrupt and so add the PMU interrupt to the MPU HWMOD for these devices. This change also moves the PMU code out of the mach-omap2/devices.c files into its own pmu.c file as suggested by Kevin Hilman to de-clutter devices.c. Cc: Ming Lei Cc: Will Deacon Cc: Benoit Cousson Cc: Paul Walmsley Cc: Kevin Hilman Signed-off-by: Jon Hunter [paul@pwsan.com: fixed checkpatch messages; updated to apply; dropped old-style initial filename line in header comments] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index f629df1..0deb300 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -199,6 +199,7 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o # EMU peripherals obj-$(CONFIG_OMAP3_EMU) += emu.o +obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o # L3 interconnect obj-$(CONFIG_ARCH_OMAP3) += omap_l3_smx.o diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 33bdbe4..1b7e1c6 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -434,34 +434,6 @@ static void omap_init_mcspi(void) static inline void omap_init_mcspi(void) {} #endif -static struct resource omap2_pmu_resource = { - .start = 3 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, -}; - -static struct resource omap3_pmu_resource = { - .start = 3 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device omap_pmu_device = { - .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, - .num_resources = 1, -}; - -static void omap_init_pmu(void) -{ - if (cpu_is_omap24xx()) - omap_pmu_device.resource = &omap2_pmu_resource; - else if (cpu_is_omap34xx()) - omap_pmu_device.resource = &omap3_pmu_resource; - else - return; - - platform_device_register(&omap_pmu_device); -} - /** * omap_init_rng - bind the RNG hwmod to the RNG omap_device * @@ -664,7 +636,6 @@ static int __init omap2_init_devices(void) omap_init_mcpdm(); omap_init_mcspi(); } - omap_init_pmu(); omap_init_sti(); omap_init_rng(); omap_init_sham(); diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index de39017..d59a9ce 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -218,8 +218,14 @@ struct omap_hwmod omap2xxx_l4_wkup_hwmod = { }; /* MPU */ +static struct omap_hwmod_irq_info omap2xxx_mpu_irqs[] = { + { .name = "pmu", .irq = 3 }, + { .irq = -1 } +}; + struct omap_hwmod omap2xxx_mpu_hwmod = { .name = "mpu", + .mpu_irqs = omap2xxx_mpu_irqs, .class = &mpu_hwmod_class, .main_clk = "mpu_ck", }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index ffc0142..4ad1f2b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -93,8 +93,14 @@ static struct omap_hwmod omap3xxx_l4_sec_hwmod = { }; /* MPU */ +static struct omap_hwmod_irq_info omap3xxx_mpu_irqs[] = { + { .name = "pmu", .irq = 3 }, + { .irq = -1 } +}; + static struct omap_hwmod omap3xxx_mpu_hwmod = { .name = "mpu", + .mpu_irqs = omap3xxx_mpu_irqs, .class = &mpu_hwmod_class, .main_clk = "arm_fck", }; diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c new file mode 100644 index 0000000..cf68bab --- /dev/null +++ b/arch/arm/mach-omap2/pmu.c @@ -0,0 +1,82 @@ +/* + * OMAP2 ARM Performance Monitoring Unit (PMU) Support + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * Contacts: + * Jon Hunter + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include + +#include +#include + +static char *omap2_pmu_oh_names[] = {"mpu"}; +static char *omap3_pmu_oh_names[] = {"mpu", "debugss"}; +static struct platform_device *omap_pmu_dev; + +/** + * omap2_init_pmu - creates and registers PMU platform device + * @oh_num: Number of OMAP HWMODs required to create PMU device + * @oh_names: Array of OMAP HWMODS names required to create PMU device + * + * Uses OMAP HWMOD framework to create and register an ARM PMU device + * from a list of HWMOD names passed. Currently supports OMAP2 and + * OMAP3 devices. + */ +static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) +{ + int i; + struct omap_hwmod *oh[2]; + char *dev_name = "arm-pmu"; + + if ((!oh_num) || (oh_num > 2)) + return -EINVAL; + + for (i = 0; i < oh_num; i++) { + oh[i] = omap_hwmod_lookup(oh_names[i]); + if (!oh[i]) { + pr_err("Could not look up %s hwmod\n", oh_names[i]); + return -ENODEV; + } + } + + omap_pmu_dev = omap_device_build_ss(dev_name, -1, oh, oh_num, NULL, 0, + NULL, 0, 0); + WARN(IS_ERR(omap_pmu_dev), "Can't build omap_device for %s.\n", + dev_name); + + return IS_ERR(omap_pmu_dev) ? PTR_ERR(omap_pmu_dev) : 0; +} + +static int __init omap_init_pmu(void) +{ + unsigned oh_num; + char **oh_names; + + /* + * To create an ARM-PMU device the following HWMODs + * are required for the various OMAP2+ devices. + * + * OMAP24xx: mpu + * OMAP3xxx: mpu, debugss + */ + if (cpu_is_omap24xx()) { + oh_num = ARRAY_SIZE(omap2_pmu_oh_names); + oh_names = omap2_pmu_oh_names; + } else if (cpu_is_omap34xx()) { + oh_num = ARRAY_SIZE(omap3_pmu_oh_names); + oh_names = omap3_pmu_oh_names; + } else { + return 0; + } + + return omap2_init_pmu(oh_num, oh_names); +} +subsys_initcall(omap_init_pmu); -- cgit v0.10.2 From efc7f49c87b7b806fbd840eb0ece5a3c8d2d79ef Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Sun, 23 Sep 2012 17:28:29 -0600 Subject: ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD For OMAP4430 PMU events are routed to the CPU via the cross trigger interface (CTI) because there are no dedicated interrupts. In order to route the PMU events via the CTI IRQs, the following modules must be enabled: l3_instr, l3_main_3, debugss Therefore, build the arm-pmu device via these three HWMODs. However, the CTI support for this platform still needs some work. Until that's finished, temporarily disable the PMU on OMAP4430. Cc: Ming Lei Cc: Will Deacon Cc: Benoit Cousson Cc: Paul Walmsley Cc: Kevin Hilman Signed-off-by: Ming Lei Signed-off-by: Will Deacon Signed-off-by: Jon Hunter [paul@pwsan.com: temporarily disabled OMAP4430 PMU support until a better CTI interface can be implemented; added patch description note] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index cf68bab..af35c77 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -19,6 +19,7 @@ static char *omap2_pmu_oh_names[] = {"mpu"}; static char *omap3_pmu_oh_names[] = {"mpu", "debugss"}; +static char *omap4430_pmu_oh_names[] = {"l3_main_3", "l3_instr", "debugss"}; static struct platform_device *omap_pmu_dev; /** @@ -27,16 +28,16 @@ static struct platform_device *omap_pmu_dev; * @oh_names: Array of OMAP HWMODS names required to create PMU device * * Uses OMAP HWMOD framework to create and register an ARM PMU device - * from a list of HWMOD names passed. Currently supports OMAP2 and - * OMAP3 devices. + * from a list of HWMOD names passed. Currently supports OMAP2, OMAP3 + * and OMAP4430 devices. */ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) { int i; - struct omap_hwmod *oh[2]; + struct omap_hwmod *oh[3]; char *dev_name = "arm-pmu"; - if ((!oh_num) || (oh_num > 2)) + if ((!oh_num) || (oh_num > 3)) return -EINVAL; for (i = 0; i < oh_num; i++) { @@ -66,6 +67,7 @@ static int __init omap_init_pmu(void) * * OMAP24xx: mpu * OMAP3xxx: mpu, debugss + * OMAP4430: l3_main_3, l3_instr, debugss */ if (cpu_is_omap24xx()) { oh_num = ARRAY_SIZE(omap2_pmu_oh_names); @@ -73,6 +75,12 @@ static int __init omap_init_pmu(void) } else if (cpu_is_omap34xx()) { oh_num = ARRAY_SIZE(omap3_pmu_oh_names); oh_names = omap3_pmu_oh_names; + } else if (cpu_is_omap443x()) { + oh_num = ARRAY_SIZE(omap4430_pmu_oh_names); + oh_names = omap4430_pmu_oh_names; + /* XXX Remove the next two lines when CTI driver available */ + pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n"); + return 0; } else { return 0; } -- cgit v0.10.2 From 6a9bce2766ef8bb7025c011653914a94a2a9ef32 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Sun, 23 Sep 2012 17:28:30 -0600 Subject: ARM: OMAP2+: PMU: Add runtime PM support The original implementation of this patch was done by Ming Lei for PMU on OMAP4 [1]. Since then the PM runtime calls have been moved into the ARM PMU code and this greatly simplifies the changes. The another differnce since the original version, is that it is no longer necessary to call pm_runtime_get/put during the PMU initialisation was we are no longer accessing the hardware at this stage. By adding runtime PM support, we can ensure that the appropriate power and clock domains are kept on while PMU is being used. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074153.html Cc: Ming Lei Cc: Will Deacon Cc: Benoit Cousson Cc: Paul Walmsley Cc: Kevin Hilman Signed-off-by: Jon Hunter Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index af35c77..0560037 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -11,6 +11,7 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ +#include #include @@ -53,7 +54,12 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) WARN(IS_ERR(omap_pmu_dev), "Can't build omap_device for %s.\n", dev_name); - return IS_ERR(omap_pmu_dev) ? PTR_ERR(omap_pmu_dev) : 0; + if (IS_ERR(omap_pmu_dev)) + return PTR_ERR(omap_pmu_dev); + + pm_runtime_enable(&omap_pmu_dev->dev); + + return 0; } static int __init omap_init_pmu(void) -- cgit v0.10.2 From 76a5d9bfc42d60e9a672e0cae776157a60970f4e Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Sun, 23 Sep 2012 17:28:30 -0600 Subject: ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70 OMAP4460 and OMAP4470 devices have dedicated PMU interrupts and so add these interrupts to the MPU HWMOD so we can use these for PMU events on these devices. The PMU interrupts need to be the first interrupts in the array of interrupts as the ARM PMU driver assumes this. By using these dedicated interrupts we only need to enable the MPU and DEBUG sub-systems for PMU to work. This is different to OMAP4430 that did not have dedicated interrupts and required other power domains in addition to the DEBUG sub-system to be enabled so we could route the PMU events to the CTI interrupts. Hence, OMAP4460 and OMAP4470 devices can use the same list of HWMODs to create the PMU device that is using by OMAP3. Cc: Ming Lei Cc: Will Deacon Cc: Benoit Cousson Cc: Paul Walmsley Cc: Kevin Hilman Signed-off-by: Jon Hunter [paul@pwsan.com: updated to apply] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4ad1f2b..016429d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2223,7 +2223,7 @@ static struct omap_hwmod_addr_space omap3xxx_l4_emu_addrs[] = { static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_debugss = { .master = &omap3xxx_l3_main_hwmod, .slave = &omap3xxx_debugss_hwmod, - .addr = &omap3xxx_l4_emu_hwmod, + .addr = omap3xxx_l4_emu_addrs, .user = OCP_USER_MPU, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 17ab2db..e6b8d02 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2615,6 +2615,8 @@ static struct omap_hwmod_class omap44xx_mpu_hwmod_class = { /* mpu */ static struct omap_hwmod_irq_info omap44xx_mpu_irqs[] = { + { .name = "pmu0", .irq = 54 + OMAP44XX_IRQ_GIC_START }, + { .name = "pmu1", .irq = 55 + OMAP44XX_IRQ_GIC_START }, { .name = "pl310", .irq = 0 + OMAP44XX_IRQ_GIC_START }, { .name = "cti0", .irq = 1 + OMAP44XX_IRQ_GIC_START }, { .name = "cti1", .irq = 2 + OMAP44XX_IRQ_GIC_START }, diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index 0560037..2a79176 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -30,7 +30,7 @@ static struct platform_device *omap_pmu_dev; * * Uses OMAP HWMOD framework to create and register an ARM PMU device * from a list of HWMOD names passed. Currently supports OMAP2, OMAP3 - * and OMAP4430 devices. + * and OMAP4 devices. */ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) { @@ -74,21 +74,20 @@ static int __init omap_init_pmu(void) * OMAP24xx: mpu * OMAP3xxx: mpu, debugss * OMAP4430: l3_main_3, l3_instr, debugss + * OMAP4460/70: mpu, debugss */ - if (cpu_is_omap24xx()) { - oh_num = ARRAY_SIZE(omap2_pmu_oh_names); - oh_names = omap2_pmu_oh_names; - } else if (cpu_is_omap34xx()) { - oh_num = ARRAY_SIZE(omap3_pmu_oh_names); - oh_names = omap3_pmu_oh_names; - } else if (cpu_is_omap443x()) { + if (cpu_is_omap443x()) { oh_num = ARRAY_SIZE(omap4430_pmu_oh_names); oh_names = omap4430_pmu_oh_names; /* XXX Remove the next two lines when CTI driver available */ pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n"); return 0; + } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { + oh_num = ARRAY_SIZE(omap3_pmu_oh_names); + oh_names = omap3_pmu_oh_names; } else { - return 0; + oh_num = ARRAY_SIZE(omap2_pmu_oh_names); + oh_names = omap2_pmu_oh_names; } return omap2_init_pmu(oh_num, oh_names); -- cgit v0.10.2 From 46f2007c1efadfa4071c17e75f140c47f09293de Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 27 Sep 2012 10:10:12 -0500 Subject: ARM: mvebu: fix build breaks from multi-platform conversion Moving ARCH_MVEBU for multi-platform support caused several breakages in recently added addr-map and pinctrl support for mvebu. This adds the necessary selects and include paths to fix the build. Signed-off-by: Rob Herring Cc: Thomas Petazzoni Cc: Gregory CLEMENT Cc: Jason Cooper Cc: Andrew Lunn Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 26a817d..416d46e 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -6,6 +6,8 @@ config ARCH_MVEBU select GENERIC_IRQ_CHIP select IRQ_DOMAIN select MULTI_IRQ_HANDLER + select PINCTRL + select PLAT_ORION select SPARSE_IRQ if ARCH_MVEBU diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index cbe5664..57f996b 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -1,4 +1,5 @@ -ccflags-$(ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ + -I$(srctree)/arch/arm/plat-orion/include obj-y += system-controller.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index 1251e5b..a82cecb 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -1,6 +1,7 @@ # # Makefile for the linux kernel. # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include obj-y += addr-map.o -- cgit v0.10.2