From 890e037509f5b3f967b16ea0ea525c7c75b213ae Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 12 Jul 2007 14:12:28 +0200 Subject: i2c: Delete outdated x1205 driver documentation The x1205 driver moved to the RTC subsystem and was significantly modified since then, so just delete the outdated documentation. Signed-off-by: Jean Delvare Cc: Alessandro Zummo diff --git a/Documentation/i2c/chips/x1205 b/Documentation/i2c/chips/x1205 deleted file mode 100644 index 09407c9..0000000 --- a/Documentation/i2c/chips/x1205 +++ /dev/null @@ -1,38 +0,0 @@ -Kernel driver x1205 -=================== - -Supported chips: - * Xicor X1205 RTC - Prefix: 'x1205' - Addresses scanned: none - Datasheet: http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html - -Authors: - Karen Spearel , - Alessandro Zummo - -Description ------------ - -This module aims to provide complete access to the Xicor X1205 RTC. -Recently Xicor has merged with Intersil, but the chip is -still sold under the Xicor brand. - -This chip is located at address 0x6f and uses a 2-byte register addressing. -Two bytes need to be written to read a single register, while most -other chips just require one and take the second one as the data -to be written. To prevent corrupting unknown chips, the user must -explicitely set the probe parameter. - -example: - -modprobe x1205 probe=0,0x6f - -The module supports one more option, hctosys, which is used to set the -software clock from the x1205. On systems where the x1205 is the -only hardware rtc, this parameter could be used to achieve a correct -date/time earlier in the system boot sequence. - -example: - -modprobe x1205 probe=0,0x6f hctosys=1 diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c index 513d1a6..b3fae35 100644 --- a/drivers/rtc/rtc-x1205.c +++ b/drivers/rtc/rtc-x1205.c @@ -9,6 +9,9 @@ * * based on a lot of other RTC drivers. * + * Information and datasheet: + * http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -26,7 +29,7 @@ * Two bytes need to be written to read a single register, * while most other chips just require one and take the second * one as the data to be written. To prevent corrupting - * unknown chips, the user must explicitely set the probe parameter. + * unknown chips, the user must explicitly set the probe parameter. */ static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -- cgit v0.10.2