From 1fa49e46972d76b2e7d80410d95aff7ab59a3d23 Mon Sep 17 00:00:00 2001
From: Padmavathi Venna <padma.v@samsung.com>
Date: Wed, 19 Dec 2012 09:49:29 -0800
Subject: ARM: S5PV210: Avoid passing the clks through platform data

I2S controller has an internal mux for RCLK source clks. The list
of source clk names were passed through platform data in non-dt case.
The variable holding the list of RCLK source clk names is not
required, as the list of clks need to be registered with clkdev
using generic connection id. This is required as part of adding DT
support for I2S controller driver.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index 0a5480b..addfb16 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -20,11 +20,6 @@
 #include <mach/irqs.h>
 #include <mach/regs-audss.h>
 
-static const char *rclksrc[] = {
-	[0] = "busclk",
-	[1] = "i2sclk",
-};
-
 static int s5pv210_cfg_i2s(struct platform_device *pdev)
 {
 	/* configure GPIO for i2s port */
@@ -52,7 +47,6 @@ static struct s3c_audio_pdata i2sv5_pdata = {
 		.i2s = {
 			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
 					 | QUIRK_NEED_RSTCLR,
-			.src_clk = rclksrc,
 			.idma_addr = S5PV210_AUDSS_INT_MEM,
 		},
 	},
@@ -75,18 +69,8 @@ struct platform_device s5pv210_device_iis0 = {
 	},
 };
 
-static const char *rclksrc_v3[] = {
-	[0] = "iis",
-	[1] = "audio-bus",
-};
-
 static struct s3c_audio_pdata i2sv3_pdata = {
 	.cfg_gpio = s5pv210_cfg_i2s,
-	.type = {
-		.i2s = {
-			.src_clk = rclksrc_v3,
-		},
-	},
 };
 
 static struct resource s5pv210_iis1_resource[] = {
-- 
cgit v0.10.2