From 9c1e105238c474d19905af504f2e7f42d4f71f9e Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 17 Aug 2009 15:17:54 +1000 Subject: powerpc: Allow perf_counters to access user memory at interrupt time This provides a mechanism to allow the perf_counters code to access user memory in a PMU interrupt routine. Such an access can cause various kinds of interrupt: SLB miss, MMU hash table miss, segment table miss, or TLB miss, depending on the processor. This commit only deals with 64-bit classic/server processors, which use an MMU hash table. 32-bit processors are already able to access user memory at interrupt time. Since we don't soft-disable on 32-bit, we avoid the possibility of reentering hash_page or the TLB miss handlers, since they run with interrupts disabled. On 64-bit processors, an SLB miss interrupt on a user address will update the slb_cache and slb_cache_ptr fields in the paca. This is OK except in the case where a PMU interrupt occurs in switch_slb, which also accesses those fields. To prevent this, we hard-disable interrupts in switch_slb. Interrupts are already soft-disabled at this point, and will get hard-enabled when they get soft-enabled later. This also reworks slb_flush_and_rebolt: to avoid hard-disabling twice, and to make sure that it clears the slb_cache_ptr when called from other callers than switch_slb, the existing routine is renamed to __slb_flush_and_rebolt, which is called by switch_slb and the new version of slb_flush_and_rebolt. Similarly, switch_stab (used on POWER3 and RS64 processors) gets a hard_irq_disable() to protect the per-cpu variables used there and in ste_allocate. If a MMU hashtable miss interrupt occurs, normally we would call hash_page to look up the Linux PTE for the address and create a HPTE. However, hash_page is fairly complex and takes some locks, so to avoid the possibility of deadlock, we check the preemption count to see if we are in a (pseudo-)NMI handler, and if so, we don't call hash_page but instead treat it like a bad access that will get reported up through the exception table mechanism. An interrupt whose handler runs even though the interrupt occurred when soft-disabled (such as the PMU interrupt) is considered a pseudo-NMI handler, which should use nmi_enter()/nmi_exit() rather than irq_enter()/irq_exit(). Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 561b646..197b156 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -67,6 +67,8 @@ int main(void) DEFINE(MMCONTEXTID, offsetof(struct mm_struct, context.id)); #ifdef CONFIG_PPC64 DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context)); + DEFINE(SIGSEGV, SIGSEGV); + DEFINE(NMI_MASK, NMI_MASK); #else DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index eb89811..8ac85e0 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -729,6 +729,11 @@ BEGIN_FTR_SECTION bne- do_ste_alloc /* If so handle it */ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) + clrrdi r11,r1,THREAD_SHIFT + lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */ + andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */ + bne 77f /* then don't call hash_page now */ + /* * On iSeries, we soft-disable interrupts here, then * hard-enable interrupts so that the hash_page code can spin on @@ -833,6 +838,20 @@ handle_page_fault: bl .low_hash_fault b .ret_from_except +/* + * We come here as a result of a DSI at a point where we don't want + * to call hash_page, such as when we are accessing memory (possibly + * user memory) inside a PMU interrupt that occurred while interrupts + * were soft-disabled. We want to invoke the exception handler for + * the access, or panic if there isn't a handler. + */ +77: bl .save_nvgprs + mr r4,r3 + addi r3,r1,STACK_FRAME_OVERHEAD + li r5,SIGSEGV + bl .bad_page_fault + b .ret_from_except + /* here we have a segment miss */ do_ste_alloc: bl .ste_allocate /* try to insert stab entry */ diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 5b7038f..a685652 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -92,15 +92,13 @@ static inline void create_shadowed_slbe(unsigned long ea, int ssize, : "memory" ); } -void slb_flush_and_rebolt(void) +static void __slb_flush_and_rebolt(void) { /* If you change this make sure you change SLB_NUM_BOLTED * appropriately too. */ unsigned long linear_llp, vmalloc_llp, lflags, vflags; unsigned long ksp_esid_data, ksp_vsid_data; - WARN_ON(!irqs_disabled()); - linear_llp = mmu_psize_defs[mmu_linear_psize].sllp; vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp; lflags = SLB_VSID_KERNEL | linear_llp; @@ -117,12 +115,6 @@ void slb_flush_and_rebolt(void) ksp_vsid_data = get_slb_shadow()->save_area[2].vsid; } - /* - * We can't take a PMU exception in the following code, so hard - * disable interrupts. - */ - hard_irq_disable(); - /* We need to do this all in asm, so we're sure we don't touch * the stack between the slbia and rebolting it. */ asm volatile("isync\n" @@ -139,6 +131,21 @@ void slb_flush_and_rebolt(void) : "memory"); } +void slb_flush_and_rebolt(void) +{ + + WARN_ON(!irqs_disabled()); + + /* + * We can't take a PMU exception in the following code, so hard + * disable interrupts. + */ + hard_irq_disable(); + + __slb_flush_and_rebolt(); + get_paca()->slb_cache_ptr = 0; +} + void slb_vmalloc_update(void) { unsigned long vflags; @@ -180,12 +187,20 @@ static inline int esids_match(unsigned long addr1, unsigned long addr2) /* Flush all user entries from the segment table of the current processor. */ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) { - unsigned long offset = get_paca()->slb_cache_ptr; + unsigned long offset; unsigned long slbie_data = 0; unsigned long pc = KSTK_EIP(tsk); unsigned long stack = KSTK_ESP(tsk); unsigned long unmapped_base; + /* + * We need interrupts hard-disabled here, not just soft-disabled, + * so that a PMU interrupt can't occur, which might try to access + * user memory (to get a stack trace) and possible cause an SLB miss + * which would update the slb_cache/slb_cache_ptr fields in the PACA. + */ + hard_irq_disable(); + offset = get_paca()->slb_cache_ptr; if (!cpu_has_feature(CPU_FTR_NO_SLBIE_B) && offset <= SLB_CACHE_ENTRIES) { int i; @@ -200,7 +215,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) } asm volatile("isync" : : : "memory"); } else { - slb_flush_and_rebolt(); + __slb_flush_and_rebolt(); } /* Workaround POWER5 < DD2.1 issue */ diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index 98cd1dc..ab5fb48 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -164,7 +164,7 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm) { struct stab_entry *stab = (struct stab_entry *) get_paca()->stab_addr; struct stab_entry *ste; - unsigned long offset = __get_cpu_var(stab_cache_ptr); + unsigned long offset; unsigned long pc = KSTK_EIP(tsk); unsigned long stack = KSTK_ESP(tsk); unsigned long unmapped_base; @@ -172,6 +172,15 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm) /* Force previous translations to complete. DRENG */ asm volatile("isync" : : : "memory"); + /* + * We need interrupts hard-disabled here, not just soft-disabled, + * so that a PMU interrupt can't occur, which might try to access + * user memory (to get a stack trace) and possible cause an STAB miss + * which would update the stab_cache/stab_cache_ptr per-cpu variables. + */ + hard_irq_disable(); + + offset = __get_cpu_var(stab_cache_ptr); if (offset <= NR_STAB_CACHE_ENTRIES) { int i; -- cgit v0.10.2