From e88d556dc5f0ef437e3538277a1dd33e5038be77 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Sat, 27 Feb 2010 14:13:43 -0600 Subject: OMAP3: serial: Check for zero-based physical addr This is for protecting a wrong mapping attempt of a zero-based physical address. The result is that, no serial port will be attempted to be mapped. Also add an additional protection for NULL clocks before attempting to enable them (if above condition applies) Signed-off-by: Sergio Aguirre diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index da77930..ef91fc0 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -664,6 +664,12 @@ void __init omap_serial_early_init(void) struct device *dev = &pdev->dev; struct plat_serial8250_port *p = dev->platform_data; + /* Don't map zero-based physical address */ + if (p->mapbase == 0) { + printk(KERN_WARNING "omap serial: No physical address" + " for uart#%d, so skipping early_init...\n", i); + continue; + } /* * Module 4KB + L4 interconnect 4KB * Static mapping, never released @@ -727,6 +733,13 @@ void __init omap_serial_init_port(int port) pdev = &uart->pdev; dev = &pdev->dev; + /* Don't proceed if there's no clocks available */ + if (unlikely(!uart->ick || !uart->fck)) { + WARN(1, "%s: can't init uart%d, no clocks available\n", + kobject_name(&dev->kobj), port); + return; + } + omap_uart_enable_clocks(uart); omap_uart_reset(uart); -- cgit v0.10.2 From 10c805eb4f89d44fe4e457d727b59af15c4a4a36 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Tue, 9 Mar 2010 13:22:14 -0600 Subject: OMAP3: serial: Use dev_* macros instead of printk As we have a struct device populated at the time we are printing the errors, using dev_* macros makes more sense, as could give a better idea where the error/warning came from. Signed-off-by: Sergio Aguirre diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index ef91fc0..a55e6ae 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -550,7 +550,7 @@ static ssize_t sleep_timeout_store(struct device *dev, unsigned int value; if (sscanf(buf, "%u", &value) != 1) { - printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); + dev_err(dev, "sleep_timeout_store: Invalid value\n"); return -EINVAL; } @@ -666,8 +666,8 @@ void __init omap_serial_early_init(void) /* Don't map zero-based physical address */ if (p->mapbase == 0) { - printk(KERN_WARNING "omap serial: No physical address" - " for uart#%d, so skipping early_init...\n", i); + dev_warn(dev, "no physical address for uart#%d," + " so skipping early_init...\n", i); continue; } /* @@ -676,21 +676,21 @@ void __init omap_serial_early_init(void) */ p->membase = ioremap(p->mapbase, SZ_8K); if (!p->membase) { - printk(KERN_ERR "ioremap failed for uart%i\n", i + 1); + dev_err(dev, "ioremap failed for uart%i\n", i + 1); continue; } sprintf(name, "uart%d_ick", i + 1); uart->ick = clk_get(NULL, name); if (IS_ERR(uart->ick)) { - printk(KERN_ERR "Could not get uart%d_ick\n", i + 1); + dev_err(dev, "Could not get uart%d_ick\n", i + 1); uart->ick = NULL; } sprintf(name, "uart%d_fck", i+1); uart->fck = clk_get(NULL, name); if (IS_ERR(uart->fck)) { - printk(KERN_ERR "Could not get uart%d_fck\n", i + 1); + dev_err(dev, "Could not get uart%d_fck\n", i + 1); uart->fck = NULL; } -- cgit v0.10.2 From 4b1bbd3fd9384ad6ca62903172ccb6a8729dd897 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Fri, 26 Feb 2010 19:58:47 -0600 Subject: omap2/3/4: serial: Remove condition for getting uart4_phys This check is invalid, since we haven't filled the omap_revision var at this point. Signed-off-by: Sergio Aguirre diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index a55e6ae..3771254 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -115,7 +115,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { } }; -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static struct plat_serial8250_port serial_platform_data3[] = { { .irq = 70, @@ -128,23 +127,12 @@ static struct plat_serial8250_port serial_platform_data3[] = { } }; -static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals) -{ - serial_platform_data3[0].mapbase = omap2_globals->uart4_phys; -} -#else -static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals) -{ -} -#endif - void __init omap2_set_globals_uart(struct omap_globals *omap2_globals) { serial_platform_data0[0].mapbase = omap2_globals->uart1_phys; serial_platform_data1[0].mapbase = omap2_globals->uart2_phys; serial_platform_data2[0].mapbase = omap2_globals->uart3_phys; - if (cpu_is_omap3630() || cpu_is_omap44xx()) - omap2_set_globals_uart4(omap2_globals); + serial_platform_data3[0].mapbase = omap2_globals->uart4_phys; } static inline unsigned int __serial_read_reg(struct uart_port *up, -- cgit v0.10.2 From 2d7f66104cc9ef508c382c8d6cb1ce6123383350 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Mon, 1 Mar 2010 11:48:26 -0600 Subject: omap3: zoom2/3 / 3630sdp: Don't init always all uarts This is useless, since in Zoom2/3 boards, the ports aren't even physically accessible. They must be explicitly initted in the board-zoom2.c, board-zoom3.c and board-3630sdp.c files instead. Signed-off-by: Sergio Aguirre diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index ca95d8d..6b39849 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -280,7 +280,6 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { omap_i2c_init(); - omap_serial_init(); usb_musb_init(&musb_board_data); enable_board_wakeup_source(); } -- cgit v0.10.2 From 9e265aa7ac493aa0a3de80aa3092d8677b3e8546 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Mon, 1 Mar 2010 11:52:36 -0600 Subject: omap3: 3630sdp: Explicitly enable all UARTs All UARTs seem physically reachable, so, enable them all. Signed-off-by: Sergio Aguirre diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index a0a2a11..504d2bd 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -96,6 +96,7 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); + omap_serial_init(); zoom_peripherals_init(); board_smc91x_init(); enable_board_wakeup_source(); -- cgit v0.10.2 From fcbcea93abbe361e14dd458d0a5a3e9dadaa5ba9 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Mon, 1 Mar 2010 12:17:15 -0600 Subject: omap3: zoom 2/3: Change debugboard serial port id This is now changed to PLAT8250_DEV_PLATFORM (= 0), because it's the only port that's going to be initialized in Zoom 2/3 boards. So, it doesn't make sense to keep the hardcoded 3 value anymore. Signed-off-by: Sergio Aguirre diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index bb4018b..e15d2e8 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -96,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device zoom_debugboard_serial_device = { .name = "serial8250", - .id = 3, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, -- cgit v0.10.2 From e6e8ea63f5d745e5a3030eec1964d0429b93107d Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Mon, 1 Mar 2010 14:26:45 -0600 Subject: omap3: zoom2/3: Register only 1 8250 port There's no more serial ports available, so, doesn't make sense to create 4 device nodes. Signed-off-by: Sergio Aguirre diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig index f5c6e11..881faea 100644 --- a/arch/arm/configs/omap_zoom2_defconfig +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -661,7 +661,7 @@ CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig index ea9a501..5e55b55 100644 --- a/arch/arm/configs/omap_zoom3_defconfig +++ b/arch/arm/configs/omap_zoom3_defconfig @@ -680,7 +680,7 @@ CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y -- cgit v0.10.2 From d5647c18eac9a313a89a3049a9fff51b20021a44 Mon Sep 17 00:00:00 2001 From: Thara Gopinath Date: Wed, 31 Mar 2010 04:16:29 -0600 Subject: OMAP: HWMOD: Adding clockdomain check This patch adds check for presence of clockdomain structure in the API omap_hwmod_get_pwrdm before trying to access the powerdomain structure. This will prevent unnecessary crashing of the system in case of a clock node with out an associated clockdomain. Signed-off-by: Thara Gopinath Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c664947..e436dcb 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1511,6 +1511,9 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh) c = oh->slaves[oh->_mpu_port_index]->_clk; } + if (!c->clkdm) + return NULL; + return c->clkdm->pwrdm.ptr; } -- cgit v0.10.2 From 56dc79aba14bad1b73508df9e210e93bbd81a577 Mon Sep 17 00:00:00 2001 From: Thara Gopinath Date: Wed, 31 Mar 2010 04:16:29 -0600 Subject: OMAP: HWMOD: Bug fixes in hwmod structure definitions This patch corrects the width of sysc_flags in hwmod sysconfig structure where the values to be stored to this variable exceed the current field width. Signed-off-by: Thara Gopinath [paul@pwsan.com: edited to apply; rearranged structure members to pack] Signed-off-by: Paul Walmsley diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 440b416..36d6ea5 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -294,8 +294,8 @@ struct omap_hwmod_class_sysconfig { u16 rev_offs; u16 sysc_offs; u16 syss_offs; + u16 sysc_flags; u8 idlemodes; - u8 sysc_flags; u8 clockact; struct omap_hwmod_sysc_fields *sysc_fields; }; -- cgit v0.10.2 From 766d305fead341889e7b9611fdc97236075a29fb Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 31 Mar 2010 04:16:30 -0600 Subject: OMAP4: prcm: Use logical OR instead of bitwise OR This patch fixes usage of bitwise OR in if conditions, and instead uses logical OR. Signed-off-by: Rajendra Nayak Cc: Abhijit Pagare Cc: Tony Lindgren Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index b87ad66..6e568ec 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -240,7 +240,7 @@ static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable) bits = OMAP24XX_CLKSTCTRL_ENABLE_AUTO; else bits = OMAP24XX_CLKSTCTRL_DISABLE_AUTO; - } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) { + } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { if (enable) bits = OMAP34XX_CLKSTCTRL_ENABLE_AUTO; else @@ -812,7 +812,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm) cm_set_mod_reg_bits(OMAP24XX_FORCESTATE, clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL); - } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) { + } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP << __ffs(clkdm->clktrctrl_mask)); @@ -856,7 +856,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm) cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE, clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL); - } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) { + } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP << __ffs(clkdm->clktrctrl_mask)); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 9a0fb38..ebfce7d 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -222,7 +222,7 @@ void pwrdm_init(struct powerdomain **pwrdm_list) { struct powerdomain **p = NULL; - if (cpu_is_omap24xx() | cpu_is_omap34xx()) { + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { pwrstctrl_reg_offs = OMAP2_PM_PWSTCTRL; pwrstst_reg_offs = OMAP2_PM_PWSTST; } else if (cpu_is_omap44xx()) { diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 9537f6f..07a60f1 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -123,7 +123,7 @@ struct omap3_prcm_regs prcm_context; u32 omap_prcm_get_reset_sources(void) { /* XXX This presumably needs modification for 34XX */ - if (cpu_is_omap24xx() | cpu_is_omap34xx()) + if (cpu_is_omap24xx() || cpu_is_omap34xx()) return prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f; if (cpu_is_omap44xx()) return prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f; @@ -157,7 +157,7 @@ void omap_prcm_arch_reset(char mode, const char *cmd) else WARN_ON(1); - if (cpu_is_omap24xx() | cpu_is_omap34xx()) + if (cpu_is_omap24xx() || cpu_is_omap34xx()) prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, OMAP2_RM_RSTCTRL); if (cpu_is_omap44xx()) -- cgit v0.10.2 From d54a45e2533ef33678dc340298b022a289d2b3e3 Mon Sep 17 00:00:00 2001 From: Ranjith Lohithakshan Date: Wed, 31 Mar 2010 04:16:30 -0600 Subject: OMAP3: clock: fix enable bit used for dpll4_m4x2 clock The enable bit for dpll4_m4x2 clock should be OMAP3430_PWRDN_DSS1_SHIFT. The code erroneously uses OMAP3430_PWRDN_CAM_SHIFT which is meant for dpll4_m5x2 clock. This came into notice during a recent review of the clock tree. Signed-off-by: Ranjith Lohithakshan Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index d5153b6..9cba556 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -895,7 +895,7 @@ static struct clk dpll4_m4x2_ck = { .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m4_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, + .enable_bit = OMAP3430_PWRDN_DSS1_SHIFT, .flags = INVERT_ENABLE, .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, -- cgit v0.10.2 From 499bca9b6d3243f9278a1f5a22d00e67acdd844d Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Thu, 4 Mar 2010 03:23:46 -0500 Subject: [CPUFREQ] fix a lockdep warning There is no need to do sysfs_remove_link() or kobject_put() etc. when policy_rwsem_write is held, move them after releasing the lock. This fixes the lockdep warning: halt/4071 is trying to acquire lock: (s_active){++++.+}, at: [] .sysfs_addrm_finish+0x58/0xc0 but task is already holding lock: (&per_cpu(cpu_policy_rwsem, cpu)){+.+.+.}, at: [] .lock_policy_rwsem_write+0x84/0xf4 Reported-by: Benjamin Herrenschmidt Signed-off-by: WANG Cong Cc: Johannes Berg Cc: Venkatesh Pallipadi Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 2d5d575..75d293e 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1113,6 +1113,8 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) unsigned int cpu = sys_dev->id; unsigned long flags; struct cpufreq_policy *data; + struct kobject *kobj; + struct completion *cmp; #ifdef CONFIG_SMP struct sys_device *cpu_sys_dev; unsigned int j; @@ -1141,10 +1143,11 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) dprintk("removing link\n"); cpumask_clear_cpu(cpu, data->cpus); spin_unlock_irqrestore(&cpufreq_driver_lock, flags); - sysfs_remove_link(&sys_dev->kobj, "cpufreq"); + kobj = &sys_dev->kobj; cpufreq_cpu_put(data); cpufreq_debug_enable_ratelimit(); unlock_policy_rwsem_write(cpu); + sysfs_remove_link(kobj, "cpufreq"); return 0; } #endif @@ -1181,7 +1184,10 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) data->governor->name, CPUFREQ_NAME_LEN); #endif cpu_sys_dev = get_cpu_sysdev(j); - sysfs_remove_link(&cpu_sys_dev->kobj, "cpufreq"); + kobj = &cpu_sys_dev->kobj; + unlock_policy_rwsem_write(cpu); + sysfs_remove_link(kobj, "cpufreq"); + lock_policy_rwsem_write(cpu); cpufreq_cpu_put(data); } } @@ -1192,19 +1198,22 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) if (cpufreq_driver->target) __cpufreq_governor(data, CPUFREQ_GOV_STOP); - kobject_put(&data->kobj); + kobj = &data->kobj; + cmp = &data->kobj_unregister; + unlock_policy_rwsem_write(cpu); + kobject_put(kobj); /* we need to make sure that the underlying kobj is actually * not referenced anymore by anybody before we proceed with * unloading. */ dprintk("waiting for dropping of refcount\n"); - wait_for_completion(&data->kobj_unregister); + wait_for_completion(cmp); dprintk("wait complete\n"); + lock_policy_rwsem_write(cpu); if (cpufreq_driver->exit) cpufreq_driver->exit(data); - unlock_policy_rwsem_write(cpu); free_cpumask_var(data->related_cpus); -- cgit v0.10.2 From fd187aaf980c45f1d16a94a846faa68e24de03c8 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Fri, 26 Mar 2010 10:01:34 +0100 Subject: [CPUFREQ] use max load in conservative governor Instead of using the load of the last CPU in a package, use the maximum load of all CPUs in a package. Reported-by: Jean-Christian Goussard Signed-off-by: Dominik Brodowski Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 599a40b..3a14787 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -444,6 +444,7 @@ static struct attribute_group dbs_attr_group_old = { static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) { unsigned int load = 0; + unsigned int max_load = 0; unsigned int freq_target; struct cpufreq_policy *policy; @@ -501,6 +502,9 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) continue; load = 100 * (wall_time - idle_time) / wall_time; + + if (load > max_load) + max_load = load; } /* @@ -511,7 +515,7 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) return; /* Check for frequency increase */ - if (load > dbs_tuners_ins.up_threshold) { + if (max_load > dbs_tuners_ins.up_threshold) { this_dbs_info->down_skip = 0; /* if we are already at full speed then break out early */ @@ -538,7 +542,7 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) * can support the current CPU usage without triggering the up * policy. To be safe, we focus 10 points under the threshold. */ - if (load < (dbs_tuners_ins.down_threshold - 10)) { + if (max_load < (dbs_tuners_ins.down_threshold - 10)) { freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100; this_dbs_info->requested_freq -= freq_target; -- cgit v0.10.2 From 8b472d739b2ddd8ab7fb278874f696cd95b25a5e Mon Sep 17 00:00:00 2001 From: Curt Wohlgemuth Date: Sat, 3 Apr 2010 16:45:06 -0400 Subject: ext4: Fix possible lost inode write in no journal mode In the no-journal case, ext4_write_inode() will fetch the bh and call sync_dirty_buffer() on it. However, if the bh has already been written and the bh reclaimed for some other purpose, AND if the inode is the only one in the inode table block in use, then ext4_get_inode_loc() will not read the inode table block from disk, but as an optimization, fill the block with zero's assuming that its caller will copy in the on-disk version of the inode. This is not done by ext4_write_inode(), so the contents of the inode can simply get lost. The fix is to use __ext4_get_inode_loc() with in_mem set to 0, instead of ext4_get_inode_loc(). Long term the API needs to be fixed so it's obvious why latter is not safe. Addresses-Google-Bug: #2526446 Signed-off-by: Curt Wohlgemuth Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 11119e0..87e3c70 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -5374,7 +5374,7 @@ int ext4_write_inode(struct inode *inode, struct writeback_control *wbc) } else { struct ext4_iloc iloc; - err = ext4_get_inode_loc(inode, &iloc); + err = __ext4_get_inode_loc(inode, &iloc, 0); if (err) return err; if (wbc->sync_mode == WB_SYNC_ALL) -- cgit v0.10.2 From fd2dd9fbaf9e498ec63eef298921e36556f7214c Mon Sep 17 00:00:00 2001 From: Curt Wohlgemuth Date: Sat, 3 Apr 2010 17:44:16 -0400 Subject: ext4: Fix buffer head leaks after calls to ext4_get_inode_loc() Calls to ext4_get_inode_loc() returns with a reference to a buffer head in iloc->bh. The callers of this function in ext4_write_inode() when in no journal mode and in ext4_xattr_fiemap() don't release the buffer head after using it. Addresses-Google-Bug: #2548165 Signed-off-by: Curt Wohlgemuth Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 94c8ee8..236b834 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3879,6 +3879,7 @@ static int ext4_xattr_fiemap(struct inode *inode, physical += offset; length = EXT4_SB(inode->i_sb)->s_inode_size - offset; flags |= FIEMAP_EXTENT_DATA_INLINE; + brelse(iloc.bh); } else { /* external block */ physical = EXT4_I(inode)->i_file_acl << blockbits; length = inode->i_sb->s_blocksize; diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 87e3c70..ba1eee8 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -5385,6 +5385,7 @@ int ext4_write_inode(struct inode *inode, struct writeback_control *wbc) (unsigned long long)iloc.bh->b_blocknr); err = -EIO; } + brelse(iloc.bh); } return err; } -- cgit v0.10.2 From 73a0e614580fb650846be1e9315f6b7b6069b9cc Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 6 Apr 2010 13:24:08 -0600 Subject: x86/PCI: ignore Consumer/Producer bit in ACPI window descriptions ACPI Address Space Descriptors (used in _CRS) have a Consumer/Producer bit that is supposed to distinguish regions that are consumed directly by a device from those that are forwarded ("produced") by a bridge. But BIOSes have apparently not used this consistently, and Windows seems to ignore it, so I think Linux should ignore it as well. I can't point to any of these supposed broken BIOSes, but since we now rely on _CRS by default, I think it's safer to ignore this bit from the start. Here are details of my experiments with how Windows handles it: https://bugzilla.kernel.org/show_bug.cgi?id=15701 Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index c7b1ebf..334153c 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -71,8 +71,7 @@ resource_to_addr(struct acpi_resource *resource, if (ACPI_SUCCESS(status) && (addr->resource_type == ACPI_MEMORY_RANGE || addr->resource_type == ACPI_IO_RANGE) && - addr->address_length > 0 && - addr->producer_consumer == ACPI_PRODUCER) { + addr->address_length > 0) { return AE_OK; } return AE_ERROR; -- cgit v0.10.2 From 4352aa5bbf1d0080c2dcf904ce1e4be0a1cb5937 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 25 Mar 2010 13:03:30 -0700 Subject: PCI aerdrv: use correct bit defines and add 2ms delay to aer_root_reset While testing completion timeouts I found that hardware was not recovering. It looks like the hot reset was never being propagated to the endpoint devices on the bus due to the fact that we were clearing the bit too quickly. The documentation I have states that we should be transmitting hot reset TS1s for 2ms. To achieve this I have added a 2ms delay from the time we set the secondary bus reset bit to the time we clear it. In addition I changed the define used for the secondary bus reset bit to match the register define that was being used. Reviewed-by: Hidetoshi Seto Signed-off-by: Alexander Duyck Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index aa495ad..7a711ee 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -244,11 +244,17 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev) /* Assert Secondary Bus Reset */ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &p2p_ctrl); - p2p_ctrl |= PCI_CB_BRIDGE_CTL_CB_RESET; + p2p_ctrl |= PCI_BRIDGE_CTL_BUS_RESET; pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl); + /* + * we should send hot reset message for 2ms to allow it time to + * propogate to all downstream ports + */ + msleep(2); + /* De-assert Secondary Bus Reset */ - p2p_ctrl &= ~PCI_CB_BRIDGE_CTL_CB_RESET; + p2p_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl); /* -- cgit v0.10.2 From 8124888940be5d9d73a6e04970d73eaec7c582b7 Mon Sep 17 00:00:00 2001 From: Yong Wang Date: Sun, 11 Apr 2010 09:26:33 +0800 Subject: eeepc-wmi: add an eeepc_wmi context structure Add an eeepc_wmi context structure to manage all the sub-devices that will be implemented later on. Put input device into it first. Signed-off-by: Yong Wang Signed-off-by: Matthew Garrett Reviewed-by: Corentin Chary diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c index 9f88226..daed4a4 100644 --- a/drivers/platform/x86/eeepc-wmi.c +++ b/drivers/platform/x86/eeepc-wmi.c @@ -23,6 +23,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -58,10 +60,15 @@ static const struct key_entry eeepc_wmi_keymap[] = { { KE_END, 0}, }; -static struct input_dev *eeepc_wmi_input_dev; +struct eeepc_wmi { + struct input_dev *inputdev; +}; + +static struct eeepc_wmi *eeepc; static void eeepc_wmi_notify(u32 value, void *context) { + struct eeepc_wmi *eeepc = context; struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; acpi_status status; @@ -69,7 +76,7 @@ static void eeepc_wmi_notify(u32 value, void *context) status = wmi_get_event_data(value, &response); if (status != AE_OK) { - pr_err("EEEPC WMI: bad event status 0x%x\n", status); + pr_err("bad event status 0x%x\n", status); return; } @@ -83,64 +90,80 @@ static void eeepc_wmi_notify(u32 value, void *context) else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX) code = NOTIFY_BRNDOWN_MIN; - if (!sparse_keymap_report_event(eeepc_wmi_input_dev, + if (!sparse_keymap_report_event(eeepc->inputdev, code, 1, true)) - pr_info("EEEPC WMI: Unknown key %x pressed\n", code); + pr_info("Unknown key %x pressed\n", code); } kfree(obj); } -static int eeepc_wmi_input_setup(void) +static int eeepc_wmi_input_init(struct eeepc_wmi *eeepc) { int err; - eeepc_wmi_input_dev = input_allocate_device(); - if (!eeepc_wmi_input_dev) + eeepc->inputdev = input_allocate_device(); + if (!eeepc->inputdev) return -ENOMEM; - eeepc_wmi_input_dev->name = "Eee PC WMI hotkeys"; - eeepc_wmi_input_dev->phys = "wmi/input0"; - eeepc_wmi_input_dev->id.bustype = BUS_HOST; + eeepc->inputdev->name = "Eee PC WMI hotkeys"; + eeepc->inputdev->phys = "wmi/input0"; + eeepc->inputdev->id.bustype = BUS_HOST; - err = sparse_keymap_setup(eeepc_wmi_input_dev, eeepc_wmi_keymap, NULL); + err = sparse_keymap_setup(eeepc->inputdev, eeepc_wmi_keymap, NULL); if (err) goto err_free_dev; - err = input_register_device(eeepc_wmi_input_dev); + err = input_register_device(eeepc->inputdev); if (err) goto err_free_keymap; return 0; err_free_keymap: - sparse_keymap_free(eeepc_wmi_input_dev); + sparse_keymap_free(eeepc->inputdev); err_free_dev: - input_free_device(eeepc_wmi_input_dev); + input_free_device(eeepc->inputdev); return err; } +static void eeepc_wmi_input_exit(struct eeepc_wmi *eeepc) +{ + if (eeepc->inputdev) { + sparse_keymap_free(eeepc->inputdev); + input_unregister_device(eeepc->inputdev); + } + + eeepc->inputdev = NULL; +} + static int __init eeepc_wmi_init(void) { int err; acpi_status status; if (!wmi_has_guid(EEEPC_WMI_EVENT_GUID)) { - pr_warning("EEEPC WMI: No known WMI GUID found\n"); + pr_warning("No known WMI GUID found\n"); return -ENODEV; } - err = eeepc_wmi_input_setup(); - if (err) + eeepc = kzalloc(sizeof(struct eeepc_wmi), GFP_KERNEL); + if (!eeepc) + return -ENOMEM; + + err = eeepc_wmi_input_init(eeepc); + if (err) { + kfree(eeepc); return err; + } status = wmi_install_notify_handler(EEEPC_WMI_EVENT_GUID, - eeepc_wmi_notify, NULL); + eeepc_wmi_notify, eeepc); if (ACPI_FAILURE(status)) { - sparse_keymap_free(eeepc_wmi_input_dev); - input_unregister_device(eeepc_wmi_input_dev); - pr_err("EEEPC WMI: Unable to register notify handler - %d\n", + pr_err("Unable to register notify handler - %d\n", status); + eeepc_wmi_input_exit(eeepc); + kfree(eeepc); return -ENODEV; } @@ -150,8 +173,8 @@ static int __init eeepc_wmi_init(void) static void __exit eeepc_wmi_exit(void) { wmi_remove_notify_handler(EEEPC_WMI_EVENT_GUID); - sparse_keymap_free(eeepc_wmi_input_dev); - input_unregister_device(eeepc_wmi_input_dev); + eeepc_wmi_input_exit(eeepc); + kfree(eeepc); } module_init(eeepc_wmi_init); -- cgit v0.10.2 From 45f2c6937ed6066c9a177c4d37f6bd76daa607c0 Mon Sep 17 00:00:00 2001 From: Yong Wang Date: Sun, 11 Apr 2010 09:27:19 +0800 Subject: eeepc-wmi: use a platform device as parent device of all sub-devices Add a platform device and use it as the parent device of all sub-devices. Signed-off-by: Yong Wang Signed-off-by: Matthew Garrett Reviewed-by: Corentin Chary diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c index daed4a4..0c9596c 100644 --- a/drivers/platform/x86/eeepc-wmi.c +++ b/drivers/platform/x86/eeepc-wmi.c @@ -32,9 +32,12 @@ #include #include #include +#include #include #include +#define EEEPC_WMI_FILE "eeepc-wmi" + MODULE_AUTHOR("Yong Wang "); MODULE_DESCRIPTION("Eee PC WMI Hotkey Driver"); MODULE_LICENSE("GPL"); @@ -64,7 +67,7 @@ struct eeepc_wmi { struct input_dev *inputdev; }; -static struct eeepc_wmi *eeepc; +static struct platform_device *platform_device; static void eeepc_wmi_notify(u32 value, void *context) { @@ -107,8 +110,9 @@ static int eeepc_wmi_input_init(struct eeepc_wmi *eeepc) return -ENOMEM; eeepc->inputdev->name = "Eee PC WMI hotkeys"; - eeepc->inputdev->phys = "wmi/input0"; + eeepc->inputdev->phys = EEEPC_WMI_FILE "/input0"; eeepc->inputdev->id.bustype = BUS_HOST; + eeepc->inputdev->dev.parent = &platform_device->dev; err = sparse_keymap_setup(eeepc->inputdev, eeepc_wmi_keymap, NULL); if (err) @@ -137,11 +141,60 @@ static void eeepc_wmi_input_exit(struct eeepc_wmi *eeepc) eeepc->inputdev = NULL; } -static int __init eeepc_wmi_init(void) +static int __devinit eeepc_wmi_platform_probe(struct platform_device *device) { + struct eeepc_wmi *eeepc; int err; acpi_status status; + eeepc = platform_get_drvdata(device); + + err = eeepc_wmi_input_init(eeepc); + if (err) + return err; + + status = wmi_install_notify_handler(EEEPC_WMI_EVENT_GUID, + eeepc_wmi_notify, eeepc); + if (ACPI_FAILURE(status)) { + pr_err("Unable to register notify handler - %d\n", + status); + err = -ENODEV; + goto error_wmi; + } + + return 0; + +error_wmi: + eeepc_wmi_input_exit(eeepc); + + return err; +} + +static int __devexit eeepc_wmi_platform_remove(struct platform_device *device) +{ + struct eeepc_wmi *eeepc; + + eeepc = platform_get_drvdata(device); + wmi_remove_notify_handler(EEEPC_WMI_EVENT_GUID); + eeepc_wmi_input_exit(eeepc); + + return 0; +} + +static struct platform_driver platform_driver = { + .driver = { + .name = EEEPC_WMI_FILE, + .owner = THIS_MODULE, + }, + .probe = eeepc_wmi_platform_probe, + .remove = __devexit_p(eeepc_wmi_platform_remove), +}; + +static int __init eeepc_wmi_init(void) +{ + struct eeepc_wmi *eeepc; + int err; + if (!wmi_has_guid(EEEPC_WMI_EVENT_GUID)) { pr_warning("No known WMI GUID found\n"); return -ENODEV; @@ -151,29 +204,46 @@ static int __init eeepc_wmi_init(void) if (!eeepc) return -ENOMEM; - err = eeepc_wmi_input_init(eeepc); + platform_device = platform_device_alloc(EEEPC_WMI_FILE, -1); + if (!platform_device) { + pr_warning("Unable to allocate platform device\n"); + err = -ENOMEM; + goto fail_platform; + } + + err = platform_device_add(platform_device); if (err) { - kfree(eeepc); - return err; + pr_warning("Unable to add platform device\n"); + goto put_dev; } - status = wmi_install_notify_handler(EEEPC_WMI_EVENT_GUID, - eeepc_wmi_notify, eeepc); - if (ACPI_FAILURE(status)) { - pr_err("Unable to register notify handler - %d\n", - status); - eeepc_wmi_input_exit(eeepc); - kfree(eeepc); - return -ENODEV; + platform_set_drvdata(platform_device, eeepc); + + err = platform_driver_register(&platform_driver); + if (err) { + pr_warning("Unable to register platform driver\n"); + goto del_dev; } return 0; + +del_dev: + platform_device_del(platform_device); +put_dev: + platform_device_put(platform_device); +fail_platform: + kfree(eeepc); + + return err; } static void __exit eeepc_wmi_exit(void) { - wmi_remove_notify_handler(EEEPC_WMI_EVENT_GUID); - eeepc_wmi_input_exit(eeepc); + struct eeepc_wmi *eeepc; + + eeepc = platform_get_drvdata(platform_device); + platform_driver_unregister(&platform_driver); + platform_device_unregister(platform_device); kfree(eeepc); } -- cgit v0.10.2 From 3d7b165539d4174b0b8396bd52ee37ba21bd0dfb Mon Sep 17 00:00:00 2001 From: Yong Wang Date: Sun, 11 Apr 2010 09:27:54 +0800 Subject: eeepc-wmi: add backlight support Add backlight support for WMI based Eee PC laptops. Signed-off-by: Yong Wang Signed-off-by: Matthew Garrett Reviewed-by: Corentin Chary diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c index 0c9596c..b227eb4 100644 --- a/drivers/platform/x86/eeepc-wmi.c +++ b/drivers/platform/x86/eeepc-wmi.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include #include #include #include @@ -43,14 +45,21 @@ MODULE_DESCRIPTION("Eee PC WMI Hotkey Driver"); MODULE_LICENSE("GPL"); #define EEEPC_WMI_EVENT_GUID "ABBC0F72-8EA1-11D1-00A0-C90629100000" +#define EEEPC_WMI_MGMT_GUID "97845ED0-4E6D-11DE-8A39-0800200C9A66" MODULE_ALIAS("wmi:"EEEPC_WMI_EVENT_GUID); +MODULE_ALIAS("wmi:"EEEPC_WMI_MGMT_GUID); #define NOTIFY_BRNUP_MIN 0x11 #define NOTIFY_BRNUP_MAX 0x1f #define NOTIFY_BRNDOWN_MIN 0x20 #define NOTIFY_BRNDOWN_MAX 0x2e +#define EEEPC_WMI_METHODID_DEVS 0x53564544 +#define EEEPC_WMI_METHODID_DSTS 0x53544344 + +#define EEEPC_WMI_DEVID_BACKLIGHT 0x00050012 + static const struct key_entry eeepc_wmi_keymap[] = { /* Sleep already handled via generic ACPI code */ { KE_KEY, 0x5d, { KEY_WLAN } }, @@ -63,44 +72,18 @@ static const struct key_entry eeepc_wmi_keymap[] = { { KE_END, 0}, }; +struct bios_args { + u32 dev_id; + u32 ctrl_param; +}; + struct eeepc_wmi { struct input_dev *inputdev; + struct backlight_device *backlight_device; }; static struct platform_device *platform_device; -static void eeepc_wmi_notify(u32 value, void *context) -{ - struct eeepc_wmi *eeepc = context; - struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL }; - union acpi_object *obj; - acpi_status status; - int code; - - status = wmi_get_event_data(value, &response); - if (status != AE_OK) { - pr_err("bad event status 0x%x\n", status); - return; - } - - obj = (union acpi_object *)response.pointer; - - if (obj && obj->type == ACPI_TYPE_INTEGER) { - code = obj->integer.value; - - if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX) - code = NOTIFY_BRNUP_MIN; - else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX) - code = NOTIFY_BRNDOWN_MIN; - - if (!sparse_keymap_report_event(eeepc->inputdev, - code, 1, true)) - pr_info("Unknown key %x pressed\n", code); - } - - kfree(obj); -} - static int eeepc_wmi_input_init(struct eeepc_wmi *eeepc) { int err; @@ -141,6 +124,174 @@ static void eeepc_wmi_input_exit(struct eeepc_wmi *eeepc) eeepc->inputdev = NULL; } +static acpi_status eeepc_wmi_get_devstate(u32 dev_id, u32 *ctrl_param) +{ + struct acpi_buffer input = { (acpi_size)sizeof(u32), &dev_id }; + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + acpi_status status; + u32 tmp; + + status = wmi_evaluate_method(EEEPC_WMI_MGMT_GUID, + 1, EEEPC_WMI_METHODID_DSTS, &input, &output); + + if (ACPI_FAILURE(status)) + return status; + + obj = (union acpi_object *)output.pointer; + if (obj && obj->type == ACPI_TYPE_INTEGER) + tmp = (u32)obj->integer.value; + else + tmp = 0; + + if (ctrl_param) + *ctrl_param = tmp; + + kfree(obj); + + return status; + +} + +static acpi_status eeepc_wmi_set_devstate(u32 dev_id, u32 ctrl_param) +{ + struct bios_args args = { + .dev_id = dev_id, + .ctrl_param = ctrl_param, + }; + struct acpi_buffer input = { (acpi_size)sizeof(args), &args }; + acpi_status status; + + status = wmi_evaluate_method(EEEPC_WMI_MGMT_GUID, + 1, EEEPC_WMI_METHODID_DEVS, &input, NULL); + + return status; +} + +static int read_brightness(struct backlight_device *bd) +{ + static u32 ctrl_param; + acpi_status status; + + status = eeepc_wmi_get_devstate(EEEPC_WMI_DEVID_BACKLIGHT, &ctrl_param); + + if (ACPI_FAILURE(status)) + return -1; + else + return ctrl_param & 0xFF; +} + +static int update_bl_status(struct backlight_device *bd) +{ + + static u32 ctrl_param; + acpi_status status; + + ctrl_param = bd->props.brightness; + + status = eeepc_wmi_set_devstate(EEEPC_WMI_DEVID_BACKLIGHT, ctrl_param); + + if (ACPI_FAILURE(status)) + return -1; + else + return 0; +} + +static const struct backlight_ops eeepc_wmi_bl_ops = { + .get_brightness = read_brightness, + .update_status = update_bl_status, +}; + +static int eeepc_wmi_backlight_notify(struct eeepc_wmi *eeepc, int code) +{ + struct backlight_device *bd = eeepc->backlight_device; + int old = bd->props.brightness; + int new; + + if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX) + new = code - NOTIFY_BRNUP_MIN + 1; + else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX) + new = code - NOTIFY_BRNDOWN_MIN; + + bd->props.brightness = new; + backlight_update_status(bd); + backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY); + + return old; +} + +static int eeepc_wmi_backlight_init(struct eeepc_wmi *eeepc) +{ + struct backlight_device *bd; + struct backlight_properties props; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.max_brightness = 15; + bd = backlight_device_register(EEEPC_WMI_FILE, + &platform_device->dev, eeepc, + &eeepc_wmi_bl_ops, &props); + if (IS_ERR(bd)) { + pr_err("Could not register backlight device\n"); + return PTR_ERR(bd); + } + + eeepc->backlight_device = bd; + + bd->props.brightness = read_brightness(bd); + bd->props.power = FB_BLANK_UNBLANK; + backlight_update_status(bd); + + return 0; +} + +static void eeepc_wmi_backlight_exit(struct eeepc_wmi *eeepc) +{ + if (eeepc->backlight_device) + backlight_device_unregister(eeepc->backlight_device); + + eeepc->backlight_device = NULL; +} + +static void eeepc_wmi_notify(u32 value, void *context) +{ + struct eeepc_wmi *eeepc = context; + struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + acpi_status status; + int code; + int orig_code; + + status = wmi_get_event_data(value, &response); + if (status != AE_OK) { + pr_err("bad event status 0x%x\n", status); + return; + } + + obj = (union acpi_object *)response.pointer; + + if (obj && obj->type == ACPI_TYPE_INTEGER) { + code = obj->integer.value; + orig_code = code; + + if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX) + code = NOTIFY_BRNUP_MIN; + else if (code >= NOTIFY_BRNDOWN_MIN && + code <= NOTIFY_BRNDOWN_MAX) + code = NOTIFY_BRNDOWN_MIN; + + if (code == NOTIFY_BRNUP_MIN || code == NOTIFY_BRNDOWN_MIN) { + if (!acpi_video_backlight_support()) + eeepc_wmi_backlight_notify(eeepc, orig_code); + } + + if (!sparse_keymap_report_event(eeepc->inputdev, + code, 1, true)) + pr_info("Unknown key %x pressed\n", code); + } + + kfree(obj); +} + static int __devinit eeepc_wmi_platform_probe(struct platform_device *device) { struct eeepc_wmi *eeepc; @@ -151,7 +302,14 @@ static int __devinit eeepc_wmi_platform_probe(struct platform_device *device) err = eeepc_wmi_input_init(eeepc); if (err) - return err; + goto error_input; + + if (!acpi_video_backlight_support()) { + err = eeepc_wmi_backlight_init(eeepc); + if (err) + goto error_backlight; + } else + pr_info("Backlight controlled by ACPI video driver\n"); status = wmi_install_notify_handler(EEEPC_WMI_EVENT_GUID, eeepc_wmi_notify, eeepc); @@ -165,8 +323,10 @@ static int __devinit eeepc_wmi_platform_probe(struct platform_device *device) return 0; error_wmi: + eeepc_wmi_backlight_exit(eeepc); +error_backlight: eeepc_wmi_input_exit(eeepc); - +error_input: return err; } @@ -176,6 +336,7 @@ static int __devexit eeepc_wmi_platform_remove(struct platform_device *device) eeepc = platform_get_drvdata(device); wmi_remove_notify_handler(EEEPC_WMI_EVENT_GUID); + eeepc_wmi_backlight_exit(eeepc); eeepc_wmi_input_exit(eeepc); return 0; @@ -195,7 +356,8 @@ static int __init eeepc_wmi_init(void) struct eeepc_wmi *eeepc; int err; - if (!wmi_has_guid(EEEPC_WMI_EVENT_GUID)) { + if (!wmi_has_guid(EEEPC_WMI_EVENT_GUID) || + !wmi_has_guid(EEEPC_WMI_MGMT_GUID)) { pr_warning("No known WMI GUID found\n"); return -ENODEV; } -- cgit v0.10.2 From a0624a90a2bea97e0d65187b4b53ad400226c3f1 Mon Sep 17 00:00:00 2001 From: Yong Wang Date: Mon, 5 Apr 2010 21:09:40 +0800 Subject: dell-wmi: Fix memory leak The output of wmi_get_event_data shall be freed before return. Signed-off-by: Matthew Garrett Signed-off-by: Yong Wang diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index 6ba6c30..66f53c3 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -217,6 +217,7 @@ static void dell_wmi_notify(u32 value, void *context) if (dell_new_hk_type && (buffer_entry[1] != 0x10)) { printk(KERN_INFO "dell-wmi: Received unknown WMI event" " (0x%x)\n", buffer_entry[1]); + kfree(obj); return; } @@ -234,7 +235,7 @@ static void dell_wmi_notify(u32 value, void *context) key->keycode == KEY_BRIGHTNESSDOWN) && acpi_video) { /* Don't report brightness notifications that will also * come via ACPI */ - return; + ; } else { input_report_key(dell_wmi_input_dev, key->keycode, 1); input_sync(dell_wmi_input_dev); -- cgit v0.10.2 From 668f4a03211ace7aa57dece90bd835b4f9b9dd30 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 6 Apr 2010 13:44:29 +0300 Subject: asus: don't modify bluetooth/wlan on boot We were storing -1 as an unsigned int and as a result the effect of passing -1 was the same as using 1. Signed-off-by: Dan Carpenter Signed-off-by: Matthew Garrett Acked-by: Corentin Chary diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index 52262b0..efe8f63 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -79,15 +79,15 @@ static uint wapf = 1; module_param(wapf, uint, 0644); MODULE_PARM_DESC(wapf, "WAPF value"); -static uint wlan_status = 1; -static uint bluetooth_status = 1; +static int wlan_status = 1; +static int bluetooth_status = 1; -module_param(wlan_status, uint, 0644); +module_param(wlan_status, int, 0644); MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot " "(0 = disabled, 1 = enabled, -1 = don't do anything). " "default is 1"); -module_param(bluetooth_status, uint, 0644); +module_param(bluetooth_status, int, 0644); MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot " "(0 = disabled, 1 = enabled, -1 = don't do anything). " "default is 1"); -- cgit v0.10.2 From fb48aef7c3e53231cddccc1e43721543bc033ae9 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 7 Apr 2010 16:22:45 +0200 Subject: eeepc-wmi: Build fix -tip testing found: eeepc-wmi.c:(.text+0x36673c): undefined reference to `sparse_keymap_report_event' drivers/built-in.o: In function `eeepc_wmi_init': eeepc-wmi.c:(.init.text+0x19cd0): undefined reference to `sparse_keymap_setup' eeepc-wmi.c:(.init.text+0x19cf0): undefined reference to `sparse_keymap_free' eeepc-wmi.c:(.init.text+0x19d0b): undefined reference to `sparse_keymap_free' drivers/built-in.o: In function `eeepc_wmi_exit': eeepc-wmi.c:(.exit.text+0x2e87): undefined reference to `sparse_keymap_free' To fix this select INPUT_SPARSEKMAP, like the ASUS driver does. Signed-off-by: Ingo Molnar Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 7bec458..6c3320d 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -390,6 +390,7 @@ config EEEPC_WMI depends on ACPI_WMI depends on INPUT depends on EXPERIMENTAL + select INPUT_SPARSEKMAP ---help--- Say Y here if you want to support WMI-based hotkeys on Eee PC laptops. -- cgit v0.10.2 From 88be026490ed89c2ffead81a52531fbac5507e01 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 7 Apr 2010 00:21:36 -0700 Subject: iwlwifi: fix scan races When an internal scan is started, nothing protects the is_internal_short_scan variable which can cause crashes, cf. https://bugzilla.kernel.org/show_bug.cgi?id=15667. Fix this by making the short scan request use the mutex for locking, which requires making the request go to a work struct so that it can sleep. Reported-by: Peter Zijlstra Signed-off-by: Johannes Berg Signed-off-by: Reinette Chatre diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index e4c2e1e..ba0fdba 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3330,6 +3330,7 @@ static void iwl_cancel_deferred_work(struct iwl_priv *priv) cancel_delayed_work_sync(&priv->init_alive_start); cancel_delayed_work(&priv->scan_check); + cancel_work_sync(&priv->start_internal_scan); cancel_delayed_work(&priv->alive_start); cancel_work_sync(&priv->beacon_update); del_timer_sync(&priv->statistics_periodic); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 894bcb8..1459cdb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -3357,7 +3357,6 @@ static void iwl_force_rf_reset(struct iwl_priv *priv) */ IWL_DEBUG_INFO(priv, "perform radio reset.\n"); iwl_internal_short_hw_scan(priv); - return; } diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 732590f..36940a9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -506,7 +506,7 @@ void iwl_init_scan_params(struct iwl_priv *priv); int iwl_scan_cancel(struct iwl_priv *priv); int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms); int iwl_mac_hw_scan(struct ieee80211_hw *hw, struct cfg80211_scan_request *req); -int iwl_internal_short_hw_scan(struct iwl_priv *priv); +void iwl_internal_short_hw_scan(struct iwl_priv *priv); int iwl_force_reset(struct iwl_priv *priv, int mode); u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame, const u8 *ie, int ie_len, int left); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 6054c5f..ef1720a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -1296,6 +1296,7 @@ struct iwl_priv { struct work_struct tt_work; struct work_struct ct_enter; struct work_struct ct_exit; + struct work_struct start_internal_scan; struct tasklet_struct irq_tasklet; diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index bd2f7c4..5062f4e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -469,6 +469,8 @@ EXPORT_SYMBOL(iwl_init_scan_params); static int iwl_scan_initiate(struct iwl_priv *priv) { + WARN_ON(!mutex_is_locked(&priv->mutex)); + IWL_DEBUG_INFO(priv, "Starting scan...\n"); set_bit(STATUS_SCANNING, &priv->status); priv->is_internal_short_scan = false; @@ -546,24 +548,31 @@ EXPORT_SYMBOL(iwl_mac_hw_scan); * internal short scan, this function should only been called while associated. * It will reset and tune the radio to prevent possible RF related problem */ -int iwl_internal_short_hw_scan(struct iwl_priv *priv) +void iwl_internal_short_hw_scan(struct iwl_priv *priv) { - int ret = 0; + queue_work(priv->workqueue, &priv->start_internal_scan); +} + +static void iwl_bg_start_internal_scan(struct work_struct *work) +{ + struct iwl_priv *priv = + container_of(work, struct iwl_priv, start_internal_scan); + + mutex_lock(&priv->mutex); if (!iwl_is_ready_rf(priv)) { - ret = -EIO; IWL_DEBUG_SCAN(priv, "not ready or exit pending\n"); - goto out; + goto unlock; } + if (test_bit(STATUS_SCANNING, &priv->status)) { IWL_DEBUG_SCAN(priv, "Scan already in progress.\n"); - ret = -EAGAIN; - goto out; + goto unlock; } + if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { IWL_DEBUG_SCAN(priv, "Scan request while abort pending\n"); - ret = -EAGAIN; - goto out; + goto unlock; } priv->scan_bands = 0; @@ -576,9 +585,8 @@ int iwl_internal_short_hw_scan(struct iwl_priv *priv) set_bit(STATUS_SCANNING, &priv->status); priv->is_internal_short_scan = true; queue_work(priv->workqueue, &priv->request_scan); - -out: - return ret; + unlock: + mutex_unlock(&priv->mutex); } EXPORT_SYMBOL(iwl_internal_short_hw_scan); @@ -964,6 +972,7 @@ void iwl_setup_scan_deferred_work(struct iwl_priv *priv) INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); INIT_WORK(&priv->request_scan, iwl_bg_request_scan); INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan); + INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan); INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check); } EXPORT_SYMBOL(iwl_setup_scan_deferred_work); -- cgit v0.10.2 From f2fa1b015e9c199e45c836c769d94db595150731 Mon Sep 17 00:00:00 2001 From: Shanyu Zhao Date: Wed, 7 Apr 2010 18:37:52 -0700 Subject: iwlwifi: correct 6000 EEPROM regulatory address For 6000 series, the 2.4G HT40 band regulatory settings address in EEPROM was off by 2. Before the fix, you'll see this in dmesg: [79535.788877] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported [79535.788880] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported And after the fix: [91132.688706] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported [91132.688709] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported Signed-off-by: Shanyu Zhao Signed-off-by: Reinette Chatre diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index c4844ad..92b3e64 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -259,7 +259,7 @@ static struct iwl_lib_ops iwl6000_lib = { EEPROM_5000_REG_BAND_3_CHANNELS, EEPROM_5000_REG_BAND_4_CHANNELS, EEPROM_5000_REG_BAND_5_CHANNELS, - EEPROM_5000_REG_BAND_24_HT40_CHANNELS, + EEPROM_6000_REG_BAND_24_HT40_CHANNELS, EEPROM_5000_REG_BAND_52_HT40_CHANNELS }, .verify_signature = iwlcore_eeprom_verify_signature, @@ -323,7 +323,7 @@ static struct iwl_lib_ops iwl6050_lib = { EEPROM_5000_REG_BAND_3_CHANNELS, EEPROM_5000_REG_BAND_4_CHANNELS, EEPROM_5000_REG_BAND_5_CHANNELS, - EEPROM_5000_REG_BAND_24_HT40_CHANNELS, + EEPROM_6000_REG_BAND_24_HT40_CHANNELS, EEPROM_5000_REG_BAND_52_HT40_CHANNELS }, .verify_signature = iwlcore_eeprom_verify_signature, diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h index 4e1ba82..8171c70 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h @@ -203,6 +203,10 @@ struct iwl_eeprom_enhanced_txpwr { #define EEPROM_5000_REG_BAND_52_HT40_CHANNELS ((0x92)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ +/* 6000 regulatory - indirect access */ +#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS ((0x80)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */ + /* 6000 and up regulatory tx power - indirect access */ /* max. elements per section */ #define EEPROM_MAX_TXPOWER_SECTION_ELEMENTS (8) -- cgit v0.10.2 From b7d2526f5c20385894a5e57b1a4292f5a1741f1b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 19 Apr 2010 18:11:29 +0200 Subject: ALSA: hda - Fix resume from StR of HP 2510p with docking-station When HP laptop with AD1981 codec is suspended and the docking-station is connected before the resume, the outputs get confused, and wrongly routed still to the speaker. This is because of a change in 2.6.34-rc1 ea52bf260ecbb175339af3178c15788df21b7516 ALSA: hda: Add powerdown for Analog Devices HDA codecs The problem was the added resume callback that doesn't consider the modified init hook. The fix is simply remove the resume callback here and make the resume normally. This doesn't change any behavior intended in the commit above (for shutting down the sound at suspend) but only fixes the resume. Reported-and-tested-by: Frans Pop Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index af34606..e9fdfc4 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -519,14 +519,6 @@ static int ad198x_suspend(struct hda_codec *codec, pm_message_t state) ad198x_power_eapd(codec); return 0; } - -static int ad198x_resume(struct hda_codec *codec) -{ - ad198x_init(codec); - snd_hda_codec_resume_amp(codec); - snd_hda_codec_resume_cache(codec); - return 0; -} #endif static struct hda_codec_ops ad198x_patch_ops = { @@ -539,7 +531,6 @@ static struct hda_codec_ops ad198x_patch_ops = { #endif #ifdef SND_HDA_NEEDS_RESUME .suspend = ad198x_suspend, - .resume = ad198x_resume, #endif .reboot_notify = ad198x_shutup, }; -- cgit v0.10.2 From b4bb5c3fd9333024044362df67e23e96158489ed Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 19 Apr 2010 10:48:38 +0200 Subject: mac80211: remove bogus TX agg state assignment When the addba timer expires but has no work to do, it should not affect the state machine. If it does, TX will not see the successfully established and we can also crash trying to re-establish the session. Cc: stable@kernel.org [2.6.32, 2.6.33] Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 5538e1b..944a8a9 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -183,7 +183,6 @@ static void sta_addba_resp_timer_expired(unsigned long data) HT_AGG_STATE_REQ_STOP_BA_MSK)) != HT_ADDBA_REQUESTED_MSK) { spin_unlock_bh(&sta->lock); - *state = HT_AGG_STATE_IDLE; #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "timer expired on tid %d but we are not " "(or no longer) expecting addBA response there", -- cgit v0.10.2 From fe6f212ce12341df18ef9b890bea739b4547157b Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 19 Apr 2010 10:46:31 -0700 Subject: mac80211: pass HT changes to driver when off channel Since "mac80211: make off-channel work generic" drivers have not been notified of configuration changes after association or authentication. This caused more dependence on current state to ensure driver will be notified when configuration changes occur. One such problem arises if off-channel is in progress when HT information changes. Since HT is only enabled on the "oper_channel" the driver will never be notified of this change. Usually the driver is notified soon after of a BSS information change (BSS_CHANGED_HT) ... but since the driver did not get a notification that this is a HT channel the new BSS information does not make sense. Fix this by also changing the off-channel information when HT is enabled and thus cause driver to be notified correctly. This fixes a problem in 4965 when associated with 5GHz 40MHz channel. Without this patch the system can associate but is unable to transfer any data, not even ping. See http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2158 Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index be5f723..8a96503 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -167,6 +167,8 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata, ht_changed = conf_is_ht(&local->hw.conf) != enable_ht || channel_type != local->hw.conf.channel_type; + if (local->tmp_channel) + local->tmp_channel_type = channel_type; local->oper_channel_type = channel_type; if (ht_changed) { -- cgit v0.10.2 From ef9e83c1ab2981769f16e626179dd56895041b38 Mon Sep 17 00:00:00 2001 From: Alexander Kuznetsov Date: Mon, 19 Apr 2010 14:17:43 -0700 Subject: 8139too: Fix a typo in the function name. Signed-off-by: Alexander Kuznetsov Signed-off-by: David S. Miller diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index a03d291..f0d23de 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -1944,7 +1944,7 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp, netif_dbg(tp, rx_status, dev, "%s() status %04x, size %04x, cur %04x\n", __func__, rx_status, rx_size, cur_rx); #if RTL8139_DEBUG > 2 - print_dump_hex(KERN_DEBUG, "Frame contents: ", + print_hex_dump(KERN_DEBUG, "Frame contents: ", DUMP_PREFIX_OFFSET, 16, 1, &rx_ring[ring_offset], 70, true); #endif -- cgit v0.10.2 From e0f278adc29e8986531a51e5ed33db42e34bf952 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 16 Apr 2010 23:07:24 +0400 Subject: powerpc/85xx/86xx: Fix build w/ CONFIG_PCI=n Currently some MPC85xx and MPC86xx boards fail to build without CONFIG_PCI: arch/powerpc/platforms/fsl_uli1575.c: In function 'quirk_final_uli5249': arch/powerpc/platforms/fsl_uli1575.c:234: error: implicit declaration of function 'pci_bus_for_each_resource' arch/powerpc/platforms/fsl_uli1575.c:234: error: expected ';' before '{' token cc1: warnings being treated as errors arch/powerpc/platforms/fsl_uli1575.c:223: warning: unused variable 'dummy' make[1]: *** [arch/powerpc/platforms/fsl_uli1575.o] Error 1 This patch fixes the issue by appending 'if PCI' condition when selecting FSL_ULI1575 Kconfig symbol. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index d951218..3a2ade2 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -51,7 +51,7 @@ config MPC85xx_DS bool "Freescale MPC85xx DS" select PPC_I8259 select DEFAULT_UIMAGE - select FSL_ULI1575 + select FSL_ULI1575 if PCI select SWIOTLB help This option enables support for the MPC85xx DS (MPC8544 DS) board @@ -60,7 +60,7 @@ config MPC85xx_RDB bool "Freescale MPC85xx RDB" select PPC_I8259 select DEFAULT_UIMAGE - select FSL_ULI1575 + select FSL_ULI1575 if PCI select SWIOTLB help This option enables support for the MPC85xx RDB (P2020 RDB) board diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index fbe9f36..a0b5638 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -13,7 +13,7 @@ config MPC8641_HPCN bool "Freescale MPC8641 HPCN" select PPC_I8259 select DEFAULT_UIMAGE - select FSL_ULI1575 + select FSL_ULI1575 if PCI select HAS_RAPIDIO select SWIOTLB help @@ -28,7 +28,7 @@ config SBC8641D config MPC8610_HPCD bool "Freescale MPC8610 HPCD" select DEFAULT_UIMAGE - select FSL_ULI1575 + select FSL_ULI1575 if PCI help This option enables support for the MPC8610 HPCD board. -- cgit v0.10.2 From e8137341b1bb9bbdc29d9fd8980485ec7dcb4109 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 12 Apr 2010 11:21:50 -0500 Subject: powerpc/fsl_booke: Correct test for MMU_FTR_BIG_PHYS The code was looking for this in cpu_features, not mmu_features. Fix this. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index c539472..3260fdf 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -116,7 +116,7 @@ void loadcam_entry(int idx) mtspr(SPRN_MAS2, TLBCAM[idx].MAS2); mtspr(SPRN_MAS3, TLBCAM[idx].MAS3); - if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS) + if (mmu_has_feature(MMU_FTR_BIG_PHYS)) mtspr(SPRN_MAS7, TLBCAM[idx].MAS7); asm volatile("isync;tlbwe;isync" : : : "memory"); @@ -152,7 +152,7 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys, TLBCAM[index].MAS3 = (phys & MAS3_RPN) | MAS3_SX | MAS3_SR; TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0); - if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS) + if (mmu_has_feature(MMU_FTR_BIG_PHYS)) TLBCAM[index].MAS7 = (u64)phys >> 32; #ifndef CONFIG_KGDB /* want user access for breakpoints */ -- cgit v0.10.2 From 1cca2d2b99f3d7eea6aa627b96bffc3b0999eca2 Mon Sep 17 00:00:00 2001 From: Wolfgang Ocker Date: Sat, 3 Apr 2010 16:11:43 +0200 Subject: powerpc/fsl-cpm: Configure clock correctly for SCC Some board setup functions call cpm1_clk_setup() or cmp2_clk_setup() to configure the clock source. If CPM_CLK_RTX has been used for the parameter mode, the clock has been configured only for TX but not for RX. With this patch CPM_CLK_RTX configures the clock for both directions correctly. Signed-off-by: Wolfgang Ocker Acked-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index 4dae369..8d103ca 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -486,9 +486,6 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) return -EINVAL; } - if (reg == &mpc8xx_immr->im_cpm.cp_sicr && mode == CPM_CLK_RX) - shift += 3; - for (i = 0; i < ARRAY_SIZE(clk_map); i++) { if (clk_map[i][0] == target && clk_map[i][1] == clock) { bits = clk_map[i][2]; @@ -503,6 +500,17 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) bits <<= shift; mask <<= shift; + + if (reg == &mpc8xx_immr->im_cpm.cp_sicr) { + if (mode == CPM_CLK_RTX) { + bits |= bits << 3; + mask |= mask << 3; + } else if (mode == CPM_CLK_RX) { + bits <<= 3; + mask <<= 3; + } + } + out_be32(reg, (in_be32(reg) & ~mask) | bits); return 0; diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index eb59272..8dc1e24 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -244,9 +244,6 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) return -EINVAL; } - if (mode == CPM_CLK_RX) - shift += 3; - for (i = 0; i < ARRAY_SIZE(clk_map); i++) { if (clk_map[i][0] == target && clk_map[i][1] == clock) { bits = clk_map[i][2]; @@ -259,6 +256,14 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) bits <<= shift; mask <<= shift; + if (mode == CPM_CLK_RTX) { + bits |= bits << 3; + mask |= mask << 3; + } else if (mode == CPM_CLK_RX) { + bits <<= 3; + mask <<= 3; + } + out_be32(reg, (in_be32(reg) & ~mask) | bits); cpm2_unmap(im_cpmux); -- cgit v0.10.2 From 5bfb3fdca308df9e9ea0830b43d3d75d0920fd7e Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Mon, 5 Apr 2010 11:13:51 -0500 Subject: powerpc/83xx: add RTC drivers in 83xx defconfig 83xx boards typically have the DS1307 or DS1374: git grep RTC_DRV arch/powerpc/configs/*83* | grep "=y" arch/powerpc/configs/83xx/asp8347_defconfig:CONFIG_RTC_DRV_DS1374=y arch/powerpc/configs/83xx/mpc8313_rdb_defconfig:CONFIG_RTC_DRV_DS1307=y arch/powerpc/configs/83xx/mpc8315_rdb_defconfig:CONFIG_RTC_DRV_DS1307=y arch/powerpc/configs/83xx/mpc832x_mds_defconfig:CONFIG_RTC_DRV_DS1374=y arch/powerpc/configs/83xx/mpc834x_itx_defconfig:CONFIG_RTC_DRV_DS1307=y arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig:CONFIG_RTC_DRV_DS1307=y arch/powerpc/configs/83xx/mpc834x_mds_defconfig:CONFIG_RTC_DRV_DS1374=y arch/powerpc/configs/83xx/mpc836x_mds_defconfig:CONFIG_RTC_DRV_DS1374=y Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 05bec48..acbb8d6 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -980,8 +980,6 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -1372,7 +1370,65 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=y +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set -- cgit v0.10.2 From f5b0959fec5d2e1aee383963a6000bb87222b78d Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Mon, 5 Apr 2010 11:14:04 -0500 Subject: powerpc/83xx: enable EPOLL syscall in defconfig 83xx users looking to run apache will experience this error: /var/log/apache2/error.log: [emerg] (38)Function not implemented: Couldn't create pollset in child; check system or user limits enabling CONFIG_EPOLL in kernel config fixes this so apache can run. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index baa2bbb..d3a4949 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -124,7 +124,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 2f2d985..1885b4a 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -123,7 +123,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 633e611..4780588 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -123,7 +123,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 0b4262b..387afb1 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -123,7 +123,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 155af00..0c8c519 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -123,7 +123,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index ff45f49..7f9d6d2 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -123,7 +123,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index 28d8ff3..639c6f8 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -123,7 +123,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 6252ab5..74d8c8d 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -123,7 +123,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 7822737..3d102aa 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -123,7 +123,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index 9451d6e..b670706 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -124,7 +124,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index f67b70d..92cec62 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -124,7 +124,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index a84fd11..0bb04ab 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -124,7 +124,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 72c2067..b749eed 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -123,7 +123,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index acbb8d6..af9abb6 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -126,7 +126,7 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y -- cgit v0.10.2 From acbcba908dd271253a9661dde1f0087c0f789e8c Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Thu, 15 Apr 2010 18:59:13 -0500 Subject: powerpc/83xx: configure SIL SATA driver in 83xx-wide defconfig to enable the storage controller on earlier rev. mpc834x itx boards. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index af9abb6..44d2f4d 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -712,7 +712,7 @@ CONFIG_ATA_SFF=y # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set -# CONFIG_SATA_SIL is not set +CONFIG_SATA_SIL=y # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set -- cgit v0.10.2 From e3c8a02743002757de53226b1b9f019c6769fd9b Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Thu, 15 Apr 2010 18:59:18 -0500 Subject: powerpc/mpc8xxx defconfigs - turn off SYSFS_DEPRECATED a recent fc11 udev update on an 83xx board made root console login disappear: Updating : udev-141-8.fc11.ppc 32/83 udev: starting version 141 udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly and sure enough, turning off SYSFS_DEPRECATED brings the login prompt back. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index d3a4949..6676887 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -103,8 +103,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 1885b4a..6fbf91f 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -102,8 +102,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 4780588..d283388 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -102,8 +102,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 387afb1..70ba9ba 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -102,8 +102,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 0c8c519..5f3ec86 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -102,8 +102,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 7f9d6d2..69cacce 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -102,8 +102,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index 639c6f8..a494e8a 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -102,8 +102,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 74d8c8d..caea0e6 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -102,8 +102,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 3d102aa..dc14639 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -102,8 +102,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index b670706..18533dc 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -103,8 +103,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index 92cec62..62cbb67 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -102,8 +102,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 0bb04ab..82873f5 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -102,8 +102,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index b749eed..5997c4e 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -102,8 +102,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index 21dad38..298ab15 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -101,8 +101,7 @@ CONFIG_RCU_FANOUT=32 CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index 5db54cd..ff8580e 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -104,8 +104,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 76c7018..086c4fd 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -105,8 +105,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index fab8ada..840027a 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -104,8 +104,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 8290385..81e976f 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -104,8 +104,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index 2499b5b..dd56e02 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -104,8 +104,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig index e2edb79..be4709d 100644 --- a/arch/powerpc/configs/85xx/socrates_defconfig +++ b/arch/powerpc/configs/85xx/socrates_defconfig @@ -104,8 +104,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index ce31325..12f4f74 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -105,8 +105,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index 0824b46..815603d 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -104,8 +104,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index 2137be4..52cb61e 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -105,8 +105,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index 5cc89aa..94658c0 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -104,8 +104,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index e7b9148..44f9630 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -105,8 +105,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index a998e40..9651d69 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -105,8 +105,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig index fc656af..4b0ba7f 100644 --- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig +++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig @@ -106,8 +106,7 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index 9073778..fb57d8f 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 44d2f4d..5339bf9 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -104,8 +104,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 8f35f80..6538150 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -109,8 +109,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 8755ea3..29a2248 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -110,8 +110,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 3f6b11b..dcbcb10 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -95,8 +95,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 41884c9..683b111 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -108,8 +108,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 6b9e6bd..6b51360 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -96,8 +96,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set -- cgit v0.10.2 From b4d0a038e0f856313ca26fd3872bc209a2e616ad Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 19 Apr 2010 23:17:27 -0500 Subject: powerpc: 2.6.34 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index 6676887..04f1626 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:14 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:38 2010 # # CONFIG_PPC64 is not set @@ -97,11 +97,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -111,6 +106,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -324,6 +320,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -335,7 +332,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -361,7 +357,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m @@ -542,6 +537,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -578,6 +575,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -595,6 +593,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -787,6 +786,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -835,6 +835,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -848,15 +849,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -882,10 +877,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -922,6 +918,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -970,18 +967,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -990,6 +990,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1082,7 +1083,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1095,7 +1095,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1258,6 +1257,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1284,6 +1284,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig index 8b1aa80..1843ee1 100644 --- a/arch/powerpc/configs/83xx/kmeter1_defconfig +++ b/arch/powerpc/configs/83xx/kmeter1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:14 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:39 2010 # # CONFIG_PPC64 is not set @@ -98,7 +98,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -318,6 +317,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_FSL_SOC=y CONFIG_PPC_PCI_CHOICE=y @@ -346,7 +346,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -387,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ATM is not set CONFIG_STP=m CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y # CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=y # CONFIG_VLAN_8021Q_GVRP is not set @@ -539,6 +539,8 @@ CONFIG_MTD_UBI_DEBUG=y # CONFIG_MTD_UBI_DEBUG_MSG_EBA is not set # CONFIG_MTD_UBI_DEBUG_MSG_WL is not set # CONFIG_MTD_UBI_DEBUG_MSG_IO is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -563,6 +565,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -690,6 +693,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -720,6 +724,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -732,15 +737,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -765,18 +764,20 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -805,8 +806,6 @@ CONFIG_SSB_POSSIBLE=y CONFIG_UIO=y # CONFIG_UIO_PDRV is not set # CONFIG_UIO_PDRV_GENIRQ is not set -# CONFIG_UIO_SMX is not set -# CONFIG_UIO_SERCOS3 is not set # # TI VLYNQ @@ -887,6 +886,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_UBIFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -911,6 +911,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -976,6 +977,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LKDTM is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 6fbf91f..78ae3bf 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:15 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:40 2010 # # CONFIG_PPC64 is not set @@ -96,11 +96,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -110,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -323,6 +319,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -334,7 +331,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -361,7 +357,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -555,6 +550,8 @@ CONFIG_MTD_NAND_FSL_ELBC=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y @@ -592,6 +589,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set @@ -611,6 +609,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -771,6 +770,7 @@ CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_KSZ884X_PCI is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_E100=y @@ -823,6 +823,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -835,6 +837,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -930,6 +933,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -979,6 +983,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -992,15 +997,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -1043,10 +1042,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1085,6 +1085,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1133,21 +1134,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1156,6 +1160,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1288,7 +1293,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1301,7 +1305,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1340,6 +1343,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set # CONFIG_USB_G_MULTI is not set # @@ -1510,6 +1514,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1536,6 +1541,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index d283388..cccb713 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:16 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:40 2010 # # CONFIG_PPC64 is not set @@ -96,11 +96,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -110,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -323,6 +319,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -334,7 +331,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -361,7 +357,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -555,6 +550,8 @@ CONFIG_MTD_NAND_IDS=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y @@ -592,6 +589,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set @@ -611,6 +609,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -734,6 +733,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -836,6 +836,7 @@ CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_KSZ884X_PCI is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_E100=y @@ -888,6 +889,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -900,6 +903,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -995,6 +999,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1044,6 +1049,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1057,15 +1063,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -1108,10 +1108,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1150,6 +1151,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1198,21 +1200,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1221,6 +1226,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1353,7 +1359,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1366,7 +1371,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1405,6 +1409,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set # CONFIG_USB_G_MULTI is not set # @@ -1575,6 +1580,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1601,6 +1607,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 70ba9ba..74cb27a 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:17 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:41 2010 # # CONFIG_PPC64 is not set @@ -96,11 +96,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -110,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -324,6 +320,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -335,7 +332,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -361,7 +357,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -456,6 +451,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -491,6 +488,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -508,6 +506,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -692,6 +691,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -704,6 +705,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -789,6 +791,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -838,6 +841,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -850,15 +854,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -884,10 +882,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -924,6 +923,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -966,18 +966,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -986,6 +989,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1170,6 +1174,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1196,6 +1201,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 5f3ec86..10412a9 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:18 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:42 2010 # # CONFIG_PPC64 is not set @@ -96,11 +96,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -110,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -324,6 +320,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -335,7 +332,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -361,7 +357,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -456,6 +451,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y @@ -493,6 +490,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set @@ -513,6 +511,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -699,6 +698,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -711,6 +712,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -807,6 +809,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -858,6 +861,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -871,15 +875,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -921,10 +919,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -963,6 +962,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1011,21 +1011,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1034,6 +1037,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1165,7 +1169,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1178,7 +1181,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1203,8 +1205,6 @@ CONFIG_MMC_BLOCK_BOUNCE=y # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_TIFM_SD is not set CONFIG_MMC_SPI=y # CONFIG_MMC_CB710 is not set @@ -1297,6 +1297,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1323,6 +1324,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 69cacce..7b31fc3 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:19 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:43 2010 # # CONFIG_PPC64 is not set @@ -96,11 +96,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -110,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -323,6 +319,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -334,7 +331,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -360,7 +356,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -539,6 +534,8 @@ CONFIG_MTD_PHYSMAP=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y @@ -576,6 +573,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set @@ -643,6 +641,7 @@ CONFIG_IDE_PROC_FS=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -766,6 +765,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -879,6 +879,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -891,6 +893,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -965,6 +968,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1014,6 +1018,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1027,15 +1032,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -1094,21 +1093,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1117,6 +1119,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1221,7 +1224,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1234,7 +1236,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1398,6 +1399,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1424,6 +1426,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index a494e8a..41401a9 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:20 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:44 2010 # # CONFIG_PPC64 is not set @@ -96,11 +96,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -110,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -323,6 +319,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -334,7 +331,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -360,7 +356,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -539,6 +534,8 @@ CONFIG_MTD_PHYSMAP=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y @@ -576,6 +573,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set @@ -595,6 +593,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -755,6 +754,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -767,6 +768,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -841,6 +843,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -890,6 +893,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -903,15 +907,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -970,21 +968,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -993,6 +994,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1097,7 +1099,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1110,7 +1111,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1274,6 +1274,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1300,6 +1301,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index caea0e6..dc176b6 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:21 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:45 2010 # # CONFIG_PPC64 is not set @@ -96,11 +96,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -110,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -323,6 +319,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -334,7 +331,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -360,7 +356,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m @@ -455,6 +450,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -490,6 +487,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -507,6 +505,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -579,6 +578,7 @@ CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_KSZ884X_PCI is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_E100=y @@ -630,6 +630,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -642,6 +644,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -725,6 +728,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -773,6 +777,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -785,15 +790,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -819,10 +818,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -859,6 +859,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -901,18 +902,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -921,6 +925,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1105,6 +1110,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1131,6 +1137,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index dc14639..f512972 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:21 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:46 2010 # # CONFIG_PPC64 is not set @@ -96,11 +96,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -110,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -322,6 +318,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -333,7 +330,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -359,7 +355,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -537,6 +532,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -572,6 +569,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -589,6 +587,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -773,6 +772,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -785,6 +786,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -870,6 +872,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -919,6 +922,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -931,15 +935,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -965,10 +963,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1005,6 +1004,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1047,18 +1047,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1067,6 +1070,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1252,6 +1256,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1278,6 +1283,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index 18533dc..77abfe8 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:23 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:47 2010 # # CONFIG_PPC64 is not set @@ -97,11 +97,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -111,6 +106,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -322,6 +318,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -335,7 +332,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -361,7 +357,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -549,6 +544,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -586,6 +583,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set @@ -605,6 +603,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -773,6 +772,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_SERIAL_QE=y +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -824,6 +824,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -836,15 +837,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -875,14 +870,18 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -931,22 +930,27 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -955,6 +959,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1144,6 +1149,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1170,6 +1176,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index 62cbb67..0cdb414 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:22 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:47 2010 # # CONFIG_PPC64 is not set @@ -96,11 +96,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -110,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -323,6 +319,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -334,7 +331,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -360,7 +356,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m @@ -455,6 +450,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -490,6 +487,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -507,6 +505,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -630,6 +629,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -754,6 +754,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -766,6 +768,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -850,6 +853,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -900,6 +904,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -912,15 +917,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -946,10 +945,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -986,6 +986,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1028,18 +1029,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1048,6 +1052,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1174,6 +1179,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1200,6 +1206,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 82873f5..e69ed1b 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:24 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:48 2010 # # CONFIG_PPC64 is not set @@ -96,11 +96,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -110,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -323,6 +319,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -334,7 +331,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -360,7 +356,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -450,6 +445,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -486,6 +483,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -503,6 +501,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -625,6 +624,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -849,6 +849,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -899,6 +900,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -912,15 +914,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -946,10 +942,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -986,6 +983,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1033,18 +1031,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1053,6 +1054,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1078,6 +1080,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1093,14 +1096,19 @@ CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1189,7 +1197,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1202,7 +1209,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1296,6 +1302,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1322,6 +1329,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 5997c4e..56e3995 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:25 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:49 2010 # # CONFIG_PPC64 is not set @@ -96,11 +96,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -110,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -321,6 +317,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -332,7 +329,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -358,7 +354,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m @@ -536,6 +531,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -572,6 +569,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -589,6 +587,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -811,6 +810,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -861,6 +861,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -874,15 +875,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -908,10 +903,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -948,6 +944,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -995,18 +992,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1015,6 +1015,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1139,7 +1140,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1152,7 +1152,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1244,6 +1243,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1270,6 +1270,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index 298ab15..f67a8d1 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:26 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:50 2010 # # CONFIG_PPC64 is not set @@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -99,7 +103,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -109,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -314,6 +318,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_FSL_SOC=y CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set @@ -344,7 +349,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -521,6 +525,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_MDIO=y @@ -574,6 +580,7 @@ CONFIG_IDE_PROC_FS=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -700,6 +707,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -731,6 +739,7 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set # @@ -914,6 +923,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -936,6 +946,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1035,6 +1046,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index ff8580e..61b122a 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:27 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:51 2010 # # CONFIG_PPC64 is not set @@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -98,11 +102,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -112,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -315,6 +315,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_FSL_SOC=y CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set @@ -345,7 +346,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -442,6 +442,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set @@ -476,6 +478,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -601,6 +604,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -787,6 +791,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -809,6 +814,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 086c4fd..a5ceaa4 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:28 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:52 2010 # # CONFIG_PPC64 is not set @@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -99,11 +103,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -113,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -318,6 +318,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y @@ -328,7 +329,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -357,7 +357,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -454,6 +453,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_MDIO=y @@ -499,6 +500,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -608,6 +610,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -620,6 +624,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -699,6 +704,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -732,7 +738,9 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: @@ -792,6 +800,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -800,6 +810,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -926,6 +937,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -948,6 +960,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index 840027a..4adb4eb 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:29 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:53 2010 # # CONFIG_PPC64 is not set @@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -98,11 +102,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -112,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -316,6 +316,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y @@ -326,7 +327,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -355,7 +355,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -452,6 +451,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set @@ -551,6 +552,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -656,6 +658,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -668,6 +672,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -752,6 +757,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -816,6 +822,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -824,6 +831,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -950,6 +958,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -972,6 +981,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 81e976f..3de8450 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:29 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:54 2010 # # CONFIG_PPC64 is not set @@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -98,11 +102,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -112,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -313,6 +313,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y @@ -323,7 +324,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -351,7 +351,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -446,6 +445,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set @@ -490,6 +491,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -595,6 +597,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -607,6 +611,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -691,6 +696,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -755,6 +761,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -763,6 +770,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -855,6 +863,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -877,6 +886,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index dd56e02..bd467fe 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:30 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:54 2010 # # CONFIG_PPC64 is not set @@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -98,11 +102,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -112,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -313,6 +313,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_FSL_SOC=y CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set @@ -343,7 +344,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -440,6 +440,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set @@ -474,6 +476,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -599,6 +602,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -814,6 +818,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -836,6 +841,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig index be4709d..9803e03 100644 --- a/arch/powerpc/configs/85xx/socrates_defconfig +++ b/arch/powerpc/configs/85xx/socrates_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:31 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:55 2010 # # CONFIG_PPC64 is not set @@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -98,11 +102,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=16 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -112,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -318,6 +318,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y @@ -328,7 +329,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set @@ -354,7 +354,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -553,6 +552,8 @@ CONFIG_MTD_NAND_SOCRATES=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y @@ -590,6 +591,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set @@ -609,6 +611,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -866,6 +869,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -915,6 +919,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -928,15 +933,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -978,10 +977,11 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1020,6 +1020,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1049,21 +1050,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1072,6 +1076,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1179,6 +1184,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set # CONFIG_HID_A4TECH is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_BELKIN is not set @@ -1193,12 +1199,16 @@ CONFIG_USB_HID=y # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MOSART is not set # CONFIG_HID_MONTEREY is not set # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set +# CONFIG_HID_QUANTA is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set +# CONFIG_HID_STANTUM is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1306,7 +1316,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1319,7 +1328,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1490,6 +1498,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1514,6 +1523,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index 12f4f74..880ab7aa 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:32 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:56 2010 # # CONFIG_PPC64 is not set @@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -99,11 +103,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -113,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -323,6 +323,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y @@ -333,7 +334,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -362,7 +362,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -519,6 +518,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=m @@ -562,6 +563,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -629,6 +631,7 @@ CONFIG_IDE_PROC_FS=y # # SCSI device support # +CONFIG_SCSI_MOD=m # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m CONFIG_SCSI_DMA=y @@ -816,6 +819,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -828,6 +833,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -946,6 +952,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1003,6 +1010,7 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_MPC is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1016,15 +1024,9 @@ CONFIG_I2C_ALGOBIT=m # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1040,14 +1042,18 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -1080,10 +1086,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1121,6 +1128,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1154,9 +1162,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set -# CONFIG_AB3100_CORE is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1165,6 +1174,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_AGP=m CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_DRM=m # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set @@ -1307,6 +1317,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=m # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1332,6 +1343,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index 815603d..230aa2f 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:33 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:57 2010 # # CONFIG_PPC64 is not set @@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -98,11 +102,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -112,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -314,6 +314,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y @@ -324,7 +325,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set @@ -350,7 +350,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -524,6 +523,8 @@ CONFIG_MTD_CFI_UTIL=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -559,6 +560,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -631,6 +633,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -703,6 +706,7 @@ CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_KSZ884X_PCI is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_E100=y @@ -754,6 +758,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -766,6 +772,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -850,6 +857,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -901,6 +909,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -912,15 +921,9 @@ CONFIG_I2C_MPC=y # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -946,10 +949,11 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -986,6 +990,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1014,18 +1019,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1034,6 +1042,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1171,6 +1180,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1193,6 +1203,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index 52cb61e..dbe04b9 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:34 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:58 2010 # # CONFIG_PPC64 is not set @@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -99,11 +103,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -113,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -317,6 +317,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y @@ -327,7 +328,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set @@ -353,7 +353,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -527,6 +526,8 @@ CONFIG_MTD_CFI_UTIL=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -563,6 +564,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -635,6 +637,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -707,6 +710,7 @@ CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_KSZ884X_PCI is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_E100=y @@ -759,6 +763,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -771,6 +777,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -857,6 +864,7 @@ CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -911,6 +919,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -922,15 +931,9 @@ CONFIG_I2C_MPC=y # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -945,14 +948,18 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -985,10 +992,11 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1026,6 +1034,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1054,19 +1063,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1075,6 +1089,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1212,6 +1227,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1234,6 +1250,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index 94658c0..845efa7 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:35 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:59 2010 # # CONFIG_PPC64 is not set @@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -98,11 +102,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -112,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -323,6 +323,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y @@ -338,7 +339,6 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -367,7 +367,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -558,6 +557,8 @@ CONFIG_MTD_NAND_FSL_UPM=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -593,6 +594,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -610,6 +612,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -715,6 +718,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -727,6 +732,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -811,6 +817,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -859,6 +866,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -871,15 +879,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -905,10 +907,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -945,6 +948,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -973,18 +977,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -993,6 +1000,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1161,6 +1169,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1183,6 +1192,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index 44f9630..b958136 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:36 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:17:00 2010 # # CONFIG_PPC64 is not set @@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -99,11 +103,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -113,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -317,6 +317,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y @@ -327,7 +328,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set @@ -353,7 +353,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -527,6 +526,8 @@ CONFIG_MTD_CFI_UTIL=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -563,6 +564,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -635,6 +637,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -707,6 +710,7 @@ CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_KSZ884X_PCI is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_E100=y @@ -759,6 +763,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -771,6 +777,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -857,6 +864,7 @@ CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -911,6 +919,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -922,15 +931,9 @@ CONFIG_I2C_MPC=y # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -945,14 +948,18 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -985,10 +992,11 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1026,6 +1034,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1054,19 +1063,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1075,6 +1089,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1212,6 +1227,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1234,6 +1250,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 9651d69..008bc97 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:36 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:17:01 2010 # # CONFIG_PPC64 is not set @@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -99,11 +103,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -113,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -317,6 +317,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y @@ -327,7 +328,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set @@ -353,7 +353,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -527,6 +526,8 @@ CONFIG_MTD_CFI_UTIL=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -563,6 +564,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -635,6 +637,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -707,6 +710,7 @@ CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_KSZ884X_PCI is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_E100=y @@ -759,6 +763,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -771,6 +777,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -857,6 +864,7 @@ CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -911,6 +919,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -922,15 +931,9 @@ CONFIG_I2C_MPC=y # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -945,14 +948,18 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -985,10 +992,11 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1026,6 +1034,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1054,19 +1063,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1075,6 +1089,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1212,6 +1227,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1234,6 +1250,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig index 4b0ba7f..2cf80db 100644 --- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig +++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:37 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:17:01 2010 # # CONFIG_PPC64 is not set @@ -69,6 +69,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -104,7 +108,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -114,6 +117,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -327,6 +331,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y @@ -342,7 +347,6 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -374,7 +378,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -599,6 +602,8 @@ CONFIG_MTD_NAND_FSL_UPM=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -636,6 +641,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -653,6 +659,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -776,6 +783,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -1003,6 +1011,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1052,6 +1061,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1065,15 +1075,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1089,14 +1093,19 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set CONFIG_GPIO_PCA953X=y +# CONFIG_GPIO_PCA953X_IRQ is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -1129,10 +1138,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set CONFIG_SENSORS_DS1621=y # CONFIG_SENSORS_I5K_AMB is not set @@ -1170,6 +1180,7 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1217,19 +1228,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1238,6 +1254,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1270,6 +1287,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set # CONFIG_HID_A4TECH is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_BELKIN is not set @@ -1284,12 +1302,16 @@ CONFIG_USB_HID=y # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MOSART is not set # CONFIG_HID_MONTEREY is not set # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set +# CONFIG_HID_QUANTA is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set +# CONFIG_HID_STANTUM is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1385,7 +1407,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1397,7 +1418,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1422,11 +1442,11 @@ CONFIG_LEDS_GPIO_OF=y CONFIG_LEDS_PCA955X=y # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y # # LED Triggers # -CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set @@ -1505,6 +1525,7 @@ CONFIG_RTC_DRV_CMOS=y # # CONFIG_RTC_DRV_GENERIC is not set CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices @@ -1613,6 +1634,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1640,6 +1662,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1850,6 +1873,7 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index 622d84f..183c59c 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:43 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:17:07 2010 # # CONFIG_PPC64 is not set @@ -102,11 +102,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -117,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -325,6 +321,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -340,13 +337,11 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set CONFIG_PCCARD=y CONFIG_PCMCIA=y # CONFIG_PCMCIA_LOAD_CIS is not set -# CONFIG_PCMCIA_IOCTL is not set # CONFIG_CARDBUS is not set # @@ -382,7 +377,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m @@ -592,6 +586,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -629,6 +625,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set CONFIG_DS1682=y # CONFIG_C2PORT is not set @@ -695,6 +692,7 @@ CONFIG_IDE_PROC_FS=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -819,6 +817,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -1059,6 +1058,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1116,6 +1116,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1129,15 +1130,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1152,14 +1147,18 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -1192,10 +1191,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1233,6 +1233,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1281,19 +1282,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1302,6 +1308,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1334,6 +1341,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1349,14 +1357,19 @@ CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1463,7 +1476,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1476,7 +1488,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1560,43 +1571,35 @@ CONFIG_RTC_DRV_RX8581=y CONFIG_STAGING=y # CONFIG_STAGING_EXCLUDE_BUILD is not set # CONFIG_ET131X is not set -# CONFIG_ME4000 is not set -# CONFIG_MEILHAUS is not set # CONFIG_USB_IP_COMMON is not set +# CONFIG_PRISM2_USB is not set # CONFIG_ECHO is not set # CONFIG_COMEDI is not set # CONFIG_ASUS_OLED is not set -# CONFIG_ALTERA_PCIE_CHDMA is not set -# CONFIG_INPUT_MIMIO is not set +# CONFIG_R8187SE is not set +# CONFIG_RTL8192SU is not set +# CONFIG_RTL8192U is not set +# CONFIG_RTL8192E is not set # CONFIG_TRANZPORT is not set # -# Android -# -# CONFIG_ANDROID is not set -# CONFIG_DST is not set -# CONFIG_POHMELFS is not set -# CONFIG_B3DFG is not set -# CONFIG_IDE_PHISON is not set -# CONFIG_PLAN9AUTH is not set -# CONFIG_HECI is not set -# CONFIG_USB_CPC is not set - -# # Qualcomm MSM Camera And Video # # # Camera Sensor Selection # -# CONFIG_HYPERV_STORAGE is not set -# CONFIG_HYPERV_BLOCK is not set -# CONFIG_HYPERV_NET is not set +# CONFIG_INPUT_GPIO is not set +# CONFIG_POHMELFS is not set +# CONFIG_IDE_PHISON is not set +# CONFIG_VT6655 is not set +# CONFIG_VT6656 is not set CONFIG_VME_BUS=y # # VME Bridge Drivers # +# CONFIG_VME_CA91CX42 is not set CONFIG_VME_TSI148=y # @@ -1605,6 +1608,24 @@ CONFIG_VME_TSI148=y # CONFIG_VME_USER is not set # +# VME Board Drivers +# +# CONFIG_VMIVME_7805 is not set + +# +# RAR Register Driver +# +# CONFIG_RAR_REGISTER is not set +# CONFIG_IIO is not set +# CONFIG_RAMZSWAP is not set +# CONFIG_BATMAN_ADV is not set +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set +# CONFIG_DT3155 is not set +# CONFIG_CRYSTALHD is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -1693,6 +1714,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1719,6 +1741,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set @@ -1864,6 +1887,7 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index eb58dec..1524d94 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:41 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:17:05 2010 # # CONFIG_PPC64 is not set @@ -102,11 +102,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -117,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -325,6 +321,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -340,13 +337,11 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set CONFIG_PCCARD=y CONFIG_PCMCIA=y # CONFIG_PCMCIA_LOAD_CIS is not set -# CONFIG_PCMCIA_IOCTL is not set # CONFIG_CARDBUS is not set # @@ -382,7 +377,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m @@ -592,6 +586,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -629,6 +625,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set CONFIG_DS1682=y # CONFIG_C2PORT is not set @@ -695,6 +692,7 @@ CONFIG_IDE_PROC_FS=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -1001,6 +999,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1058,6 +1057,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1071,15 +1071,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1094,14 +1088,18 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -1134,10 +1132,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1175,6 +1174,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1223,19 +1223,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1244,6 +1249,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1276,6 +1282,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1291,14 +1298,19 @@ CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1405,7 +1417,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1418,7 +1429,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1590,6 +1600,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1616,6 +1627,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set @@ -1761,6 +1773,7 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 62c2b81..767c204 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:42 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:17:06 2010 # # CONFIG_PPC64 is not set @@ -102,11 +102,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -117,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -326,6 +322,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -341,7 +338,6 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -369,7 +365,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m @@ -552,6 +547,7 @@ CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_STP=m CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y # CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m # CONFIG_VLAN_8021Q_GVRP is not set @@ -728,6 +724,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -765,6 +763,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set CONFIG_DS1682=y # CONFIG_C2PORT is not set @@ -782,6 +781,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -905,6 +905,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -1155,6 +1156,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1204,6 +1206,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1217,15 +1220,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1241,14 +1238,18 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -1281,10 +1282,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1322,6 +1324,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1370,19 +1373,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1391,6 +1399,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1423,6 +1432,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1438,14 +1448,19 @@ CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1552,7 +1567,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1565,7 +1579,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_ATM is not set # CONFIG_USB_GADGET is not set @@ -1650,29 +1663,29 @@ CONFIG_RTC_DRV_RX8581=y CONFIG_STAGING=y # CONFIG_STAGING_EXCLUDE_BUILD is not set # CONFIG_ET131X is not set -# CONFIG_ME4000 is not set -# CONFIG_MEILHAUS is not set # CONFIG_USB_IP_COMMON is not set +# CONFIG_PRISM2_USB is not set # CONFIG_ECHO is not set # CONFIG_COMEDI is not set # CONFIG_ASUS_OLED is not set -# CONFIG_ALTERA_PCIE_CHDMA is not set -# CONFIG_INPUT_MIMIO is not set +# CONFIG_R8187SE is not set +# CONFIG_RTL8192SU is not set +# CONFIG_RTL8192U is not set +# CONFIG_RTL8192E is not set # CONFIG_TRANZPORT is not set # -# Android +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection # -# CONFIG_ANDROID is not set -# CONFIG_DST is not set +# CONFIG_INPUT_GPIO is not set # CONFIG_POHMELFS is not set -# CONFIG_B3DFG is not set # CONFIG_IDE_PHISON is not set -# CONFIG_PLAN9AUTH is not set -# CONFIG_HECI is not set # CONFIG_VT6655 is not set -# CONFIG_USB_CPC is not set -# CONFIG_RDC_17F3101X is not set +# CONFIG_VT6656 is not set CONFIG_VME_BUS=y # @@ -1687,6 +1700,22 @@ CONFIG_VME_TSI148=y # CONFIG_VME_USER is not set # +# VME Board Drivers +# +# CONFIG_VMIVME_7805 is not set + +# +# RAR Register Driver +# +# CONFIG_RAR_REGISTER is not set +# CONFIG_IIO is not set +# CONFIG_RAMZSWAP is not set +# CONFIG_BATMAN_ADV is not set +# CONFIG_STRIP is not set +# CONFIG_DT3155 is not set +# CONFIG_CRYSTALHD is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -1772,6 +1801,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1798,6 +1828,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set @@ -1870,7 +1901,7 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m +CONFIG_ZLIB_DEFLATE=y CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y @@ -2006,6 +2037,7 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index aab3bae..55b9e4e 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:39 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:17:03 2010 # # CONFIG_PPC64 is not set @@ -97,11 +97,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -112,6 +107,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -320,6 +316,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -335,7 +332,6 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -362,7 +358,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -571,6 +566,8 @@ CONFIG_MTD_NAND_FSL_ELBC=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set @@ -605,6 +602,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -670,6 +668,7 @@ CONFIG_IDE_PROC_FS=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -792,6 +791,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -970,6 +970,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1017,6 +1018,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1029,15 +1031,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1062,18 +1058,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1082,6 +1081,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1434,6 +1434,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1461,6 +1462,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 727a8c8..1be38eb 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:40 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:17:04 2010 # # CONFIG_PPC64 is not set @@ -97,15 +97,11 @@ CONFIG_TREE_RCU=y # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_RCU_FAST_NO_HZ is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -116,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -326,6 +323,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -337,7 +335,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -365,7 +362,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -498,6 +494,8 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -534,6 +532,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -551,6 +550,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -675,6 +675,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -799,6 +800,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -811,6 +814,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -920,6 +924,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -968,6 +973,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -981,15 +987,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1014,18 +1014,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1034,6 +1037,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1151,6 +1155,7 @@ CONFIG_SND_INTEL8X0=y CONFIG_SND_PPC=y CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_SOC is not set @@ -1170,6 +1175,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1185,14 +1191,19 @@ CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1300,7 +1311,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1313,7 +1323,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1475,6 +1484,7 @@ CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m CONFIG_EFS_FS=m +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set CONFIG_VXFS_FS=m @@ -1506,6 +1516,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1717,6 +1728,7 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index 4fb04dd..a630094 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:38 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:17:02 2010 # # CONFIG_PPC64 is not set @@ -101,11 +101,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -116,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -327,6 +323,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -342,7 +339,6 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -369,7 +365,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m @@ -552,6 +547,7 @@ CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_STP=m CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y # CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m # CONFIG_VLAN_8021Q_GVRP is not set @@ -733,6 +729,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -768,6 +766,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -785,6 +784,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -1024,6 +1024,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1074,6 +1075,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1086,15 +1088,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1120,10 +1116,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1160,6 +1157,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1202,18 +1200,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1222,6 +1223,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1376,6 +1378,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1408,6 +1411,7 @@ CONFIG_RPCSEC_GSS_KRB5=y CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" +# CONFIG_CEPH_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set @@ -1540,6 +1544,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1618,6 +1623,7 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index 5c1dc76..9f89d5c 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:23:58 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:22 2010 # # CONFIG_PPC64 is not set @@ -91,11 +91,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -307,6 +302,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_FSL_SOC=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set @@ -336,7 +332,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -505,6 +500,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set @@ -516,6 +513,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -664,6 +662,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -802,6 +801,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -826,6 +826,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -924,6 +925,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index 72137cd..4ab6074 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:23:59 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:23 2010 # # CONFIG_PPC64 is not set @@ -101,11 +101,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -121,6 +116,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -147,7 +143,6 @@ CONFIG_HAVE_PERF_EVENTS=y # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y -CONFIG_EVENT_PROFILE=y # CONFIG_PERF_COUNTERS is not set # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y @@ -158,7 +153,6 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y @@ -357,6 +351,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_PCI=y @@ -365,7 +360,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -396,7 +390,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -527,6 +520,7 @@ CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_AH_ESP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y +# CONFIG_IP_VS_PROTO_SCTP is not set # # IPVS scheduler @@ -630,6 +624,7 @@ CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_STP=m CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y # CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m # CONFIG_VLAN_8021Q_GVRP is not set @@ -690,7 +685,6 @@ CONFIG_NET_SCH_FIFO=y # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set -# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set @@ -833,6 +827,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=m CONFIG_OF_MDIO=y @@ -867,6 +863,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=m # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m CONFIG_SCSI_DMA=y @@ -1179,6 +1176,7 @@ CONFIG_SERIAL_MPSC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1231,6 +1229,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MV64XXX=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1244,15 +1243,9 @@ CONFIG_I2C_MV64XXX=m # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1278,10 +1271,11 @@ CONFIG_SENSORS_ADM1026=m # CONFIG_SENSORS_ADM1029 is not set CONFIG_SENSORS_ADM1031=m # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set CONFIG_SENSORS_DS1621=m # CONFIG_SENSORS_I5K_AMB is not set @@ -1318,6 +1312,7 @@ CONFIG_SENSORS_SMSC47M1=m # CONFIG_SENSORS_SMSC47M192 is not set CONFIG_SENSORS_SMSC47B397=m # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1369,9 +1364,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set -# CONFIG_AB3100_CORE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1380,6 +1375,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1413,7 +1409,6 @@ CONFIG_USB=m CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set CONFIG_USB_MON=m # CONFIG_USB_WUSB is not set @@ -1535,6 +1530,7 @@ CONFIG_USB_SERIAL_MCT_U232=m # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QCAUX is not set # CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set @@ -1549,6 +1545,7 @@ CONFIG_USB_SERIAL_XIRCOM=m # CONFIG_USB_SERIAL_OPTION is not set CONFIG_USB_SERIAL_OMNINET=m # CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -1561,7 +1558,6 @@ CONFIG_USB_EMI62=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set CONFIG_USB_LED=m # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1574,7 +1570,6 @@ CONFIG_USB_LED=m # CONFIG_USB_IOWARRIOR is not set CONFIG_USB_TEST=m # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m # CONFIG_USB_CXACRU is not set @@ -1611,6 +1606,7 @@ CONFIG_INFINIBAND_SRP=m # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices @@ -1714,6 +1710,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=m # CONFIG_SQUASHFS is not set CONFIG_VXFS_FS=m @@ -1742,6 +1739,7 @@ CONFIG_SUNRPC_XPRT_RDMA=m CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set @@ -1817,7 +1815,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -CONFIG_BINARY_PRINTF=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1833,9 +1831,11 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y @@ -1880,7 +1880,6 @@ CONFIG_DEBUG_SPINLOCK=y # CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_HIGHMEM=y CONFIG_DEBUG_BUGVERBOSE=y @@ -1903,16 +1902,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y -CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index 7910541..81e904e 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:23:59 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:24 2010 # # CONFIG_PPC64 is not set @@ -298,6 +298,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_PPC_PCI_CHOICE=y @@ -308,7 +309,6 @@ CONFIG_PCI_8260=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -335,7 +335,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -537,6 +536,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_MDIO=y @@ -566,6 +567,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -671,6 +673,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -683,6 +687,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -737,6 +742,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -765,7 +771,9 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: @@ -804,6 +812,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -812,6 +822,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -869,6 +880,7 @@ CONFIG_AUTOFS4_FS=y # # Caches # +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index 58f7ca7..c5af46e 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:00 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:24 2010 # # CONFIG_PPC64 is not set @@ -90,11 +90,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -306,6 +301,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_FSL_SOC=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set @@ -335,7 +331,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -504,6 +499,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set @@ -515,6 +512,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -616,6 +614,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -753,6 +752,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -777,6 +777,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 9a0c981..588a2ad 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:01 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:25 2010 # # CONFIG_PPC64 is not set @@ -96,11 +96,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -116,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -328,6 +324,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -337,7 +334,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -364,7 +360,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -433,6 +428,7 @@ CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_CT is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_HL=m # CONFIG_NETFILTER_XT_TARGET_MARK is not set @@ -665,6 +661,8 @@ CONFIG_MTD_PHYSMAP=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set @@ -700,6 +698,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -717,6 +716,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -840,6 +840,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_IT821X=y # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -954,6 +955,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -966,6 +969,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -1082,6 +1086,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1131,6 +1136,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1144,15 +1150,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1178,10 +1178,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1218,6 +1219,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1246,18 +1248,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1266,6 +1271,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1417,6 +1423,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QCAUX is not set # CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set @@ -1430,6 +1437,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -1442,7 +1450,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1455,7 +1462,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1620,6 +1626,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1651,6 +1658,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set @@ -1723,9 +1731,11 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_HAS_IOMEM=y diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index 4c2c877..0cbd56f 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:02 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:26 2010 # # CONFIG_PPC64 is not set @@ -105,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -311,6 +312,7 @@ CONFIG_ISA_DMA_API=y # # CONFIG_ISA is not set CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_PPC_PCI_CHOICE=y @@ -321,7 +323,6 @@ CONFIG_PCI_8260=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -348,7 +349,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -536,6 +536,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -570,6 +572,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -704,6 +707,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -769,14 +773,9 @@ CONFIG_I2C_CPM=y # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set - -# -# Miscellaneous I2C Chip support -# # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -790,14 +789,18 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -829,19 +832,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -850,6 +858,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -908,6 +917,7 @@ CONFIG_AUTOFS4_FS=y # # Caches # +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -1100,6 +1110,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig index 9e090f2..c1be261 100644 --- a/arch/powerpc/configs/mgsuvd_defconfig +++ b/arch/powerpc/configs/mgsuvd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:03 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:27 2010 # # CONFIG_PPC64 is not set @@ -89,11 +89,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -104,6 +99,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -309,6 +305,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_FSL_SOC=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set @@ -337,7 +334,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -515,6 +511,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set @@ -542,6 +540,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -643,6 +642,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -801,6 +801,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -825,6 +826,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -892,6 +894,7 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LKDTM is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index 1315b77..27c63ce 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:04 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:28 2010 # # CONFIG_PPC64 is not set @@ -94,11 +94,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -109,6 +104,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -311,6 +307,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y @@ -319,7 +316,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -345,7 +341,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -440,6 +435,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set @@ -484,6 +481,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -605,6 +603,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -696,6 +695,7 @@ CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_KSZ884X_PCI is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_E100=y @@ -750,6 +750,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -762,6 +764,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -846,6 +849,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -910,6 +914,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -918,6 +923,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1044,6 +1050,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1066,6 +1073,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index fb57d8f..6875fb8 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:05 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:29 2010 # # CONFIG_PPC64 is not set @@ -300,6 +300,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_PPC_PCI_CHOICE=y @@ -310,7 +311,6 @@ CONFIG_PCI_8260=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -337,7 +337,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -539,6 +538,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_MDIO=y @@ -568,6 +569,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -673,6 +675,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -685,6 +689,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -796,6 +801,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -824,7 +830,9 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: @@ -863,6 +871,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -871,6 +881,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -932,6 +943,7 @@ CONFIG_AUTOFS4_FS=y # # Caches # +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 5339bf9..bbe5ae6 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:06 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:30 2010 # # CONFIG_PPC64 is not set @@ -98,11 +98,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -112,6 +107,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -330,6 +326,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -343,7 +340,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -369,7 +365,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m @@ -559,6 +554,8 @@ CONFIG_MTD_NAND_FSL_ELBC=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -596,6 +593,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -613,6 +611,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -736,6 +735,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -862,6 +862,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -874,6 +876,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -969,6 +972,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1019,6 +1023,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1032,15 +1037,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1055,14 +1054,18 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -1095,10 +1098,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1136,6 +1140,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1183,19 +1188,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1204,6 +1214,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1229,6 +1240,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1244,14 +1256,19 @@ CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1341,7 +1358,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1354,7 +1370,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1508,6 +1523,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1534,6 +1550,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 6538150..cfebef9 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:06 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:31 2010 # # CONFIG_PPC64 is not set @@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -103,11 +107,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -117,6 +116,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -333,6 +333,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -344,7 +345,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -375,7 +375,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -508,6 +507,8 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -545,6 +546,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -562,6 +564,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -686,6 +689,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -816,8 +820,11 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set +# CONFIG_IXGBEVF is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_VXGE is not set @@ -828,6 +835,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -940,6 +948,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_SERIAL_QE=m +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -992,6 +1001,7 @@ CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1005,15 +1015,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1029,14 +1033,18 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -1068,20 +1076,25 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_UCB1400_CORE is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1090,6 +1103,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1207,6 +1221,7 @@ CONFIG_SND_INTEL8X0=y CONFIG_SND_PPC=y CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_SOC is not set @@ -1226,6 +1241,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1241,14 +1257,19 @@ CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1357,7 +1378,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1370,7 +1390,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1451,6 +1470,7 @@ CONFIG_RTC_DRV_CMOS=y # # CONFIG_RTC_DRV_GENERIC is not set CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices @@ -1553,6 +1573,7 @@ CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m CONFIG_EFS_FS=m +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set CONFIG_VXFS_FS=m @@ -1584,6 +1605,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1729,6 +1751,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 29a2248..f5451d8 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:07 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:31 2010 # # CONFIG_PPC64 is not set @@ -69,6 +69,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=2 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -100,15 +104,11 @@ CONFIG_TREE_RCU=y # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_RCU_FAST_NO_HZ is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -118,6 +118,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -337,6 +338,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -348,7 +350,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -379,7 +380,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -512,6 +512,8 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -549,6 +551,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -566,6 +569,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -690,6 +694,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -820,8 +825,11 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set +# CONFIG_IXGBEVF is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_VXGE is not set @@ -832,6 +840,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -944,6 +953,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_SERIAL_QE=m +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -996,6 +1006,7 @@ CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1009,15 +1020,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1033,14 +1038,18 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -1072,20 +1081,25 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_UCB1400_CORE is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1094,6 +1108,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1211,6 +1226,7 @@ CONFIG_SND_INTEL8X0=y CONFIG_SND_PPC=y CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_SOC is not set @@ -1230,6 +1246,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1245,14 +1262,19 @@ CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1361,7 +1383,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1374,7 +1395,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1455,6 +1475,7 @@ CONFIG_RTC_DRV_CMOS=y # # CONFIG_RTC_DRV_GENERIC is not set CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices @@ -1557,6 +1578,7 @@ CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m CONFIG_EFS_FS=m +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set CONFIG_VXFS_FS=m @@ -1588,6 +1610,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1733,6 +1756,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1805,6 +1829,7 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index dcbcb10..d8d3d1d 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:08 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:32 2010 # # CONFIG_PPC64 is not set @@ -89,11 +89,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -304,6 +299,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_FSL_SOC=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set @@ -332,7 +328,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -424,6 +419,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set @@ -455,6 +452,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -606,6 +604,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -794,6 +793,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -818,6 +818,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 683b111..624eae9 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:09 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:33 2010 # # CONFIG_PPC64 is not set @@ -98,15 +98,11 @@ CONFIG_TREE_RCU=y # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_RCU_FAST_NO_HZ is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -116,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -327,6 +324,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -338,7 +336,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -366,7 +363,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -499,6 +495,8 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -536,6 +534,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -553,6 +552,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -677,6 +677,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -801,6 +802,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -813,6 +816,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -922,6 +926,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -971,6 +976,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -984,15 +990,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1008,14 +1008,18 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -1047,20 +1051,25 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_UCB1400_CORE is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1069,6 +1078,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1186,6 +1196,7 @@ CONFIG_SND_INTEL8X0=y CONFIG_SND_PPC=y CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_SOC is not set @@ -1205,6 +1216,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1220,14 +1232,19 @@ CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1335,7 +1352,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1348,7 +1364,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1511,6 +1526,7 @@ CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m CONFIG_EFS_FS=m +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set CONFIG_VXFS_FS=m @@ -1542,6 +1558,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1753,6 +1770,7 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 6b51360..45bd499 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:10 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:34 2010 # # CONFIG_PPC64 is not set @@ -90,11 +90,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -312,6 +307,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_FSL_SOC=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set @@ -341,7 +337,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -514,6 +509,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set @@ -525,6 +522,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -626,6 +624,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -763,6 +762,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -787,6 +787,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index 5d06f2c..68c175e 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:11 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:35 2010 # # CONFIG_PPC64 is not set @@ -105,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -304,6 +305,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_PPC_PCI_CHOICE=y @@ -315,7 +317,6 @@ CONFIG_PCI_8260=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -342,7 +343,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -544,6 +544,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_MDIO=y @@ -629,6 +631,7 @@ CONFIG_IDE_PROC_FS=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -734,6 +737,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -746,6 +751,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -859,6 +865,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -887,7 +894,9 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: @@ -926,6 +935,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -934,6 +945,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -996,6 +1008,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set # CONFIG_USB_G_MULTI is not set # @@ -1051,6 +1064,7 @@ CONFIG_AUTOFS4_FS=y # # Caches # +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index 57ab574..93f4505 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:12 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:36 2010 # # CONFIG_PPC64 is not set @@ -97,11 +97,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -117,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -319,6 +315,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_PCI=y @@ -327,7 +324,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -354,7 +350,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -533,6 +528,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -569,6 +566,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -640,6 +638,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -761,6 +760,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -854,6 +854,7 @@ CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_KSZ884X_PCI is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_E100=y @@ -907,6 +908,8 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4_DEPENDS=y +# CONFIG_CHELSIO_T4 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set @@ -919,6 +922,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -1016,6 +1020,7 @@ CONFIG_SERIAL_MPSC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1065,6 +1070,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MV64XXX=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1077,15 +1083,9 @@ CONFIG_I2C_MV64XXX=y # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -1111,10 +1111,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1151,6 +1152,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1179,18 +1181,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1199,6 +1204,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1231,6 +1237,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1247,14 +1254,19 @@ CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y CONFIG_HID_NTRIG=y +CONFIG_HID_ORTEK=y CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y CONFIG_HID_GREENASIA=y # CONFIG_GREENASIA_FF is not set @@ -1350,7 +1362,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1363,7 +1374,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1516,6 +1526,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1538,6 +1549,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1620,9 +1632,11 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index f2f8321..b162580 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc3 -# Wed Jan 6 09:24:13 2010 +# Linux kernel version: 2.6.34-rc5 +# Mon Apr 19 23:16:37 2010 # # CONFIG_PPC64 is not set @@ -94,11 +94,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -314,6 +309,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -323,7 +319,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -349,7 +344,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=m -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -524,6 +518,8 @@ CONFIG_MTD_PHYSMAP=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set @@ -555,6 +551,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -626,6 +623,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -846,6 +844,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -895,6 +894,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -908,15 +908,9 @@ CONFIG_I2C_MPC=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -941,18 +935,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -961,6 +958,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1071,7 +1069,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1084,7 +1081,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1251,6 +1247,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set -- cgit v0.10.2 From b90f687018e6d6c77d981b09203780f7001407e5 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 20 Apr 2010 16:51:59 -0400 Subject: ext4: Issue the discard operation *before* releasing the blocks to be reused Otherwise, we can end up having data corruption because the blocks could get reused and then discarded! https://bugzilla.kernel.org/show_bug.cgi?id=15579 Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 54df209..e5ab41b 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2534,6 +2534,17 @@ static void release_blocks_on_commit(journal_t *journal, transaction_t *txn) mb_debug(1, "gonna free %u blocks in group %u (0x%p):", entry->count, entry->group, entry); + if (test_opt(sb, DISCARD)) { + ext4_fsblk_t discard_block; + + discard_block = entry->start_blk + + ext4_group_first_block_no(sb, entry->group); + trace_ext4_discard_blocks(sb, + (unsigned long long)discard_block, + entry->count); + sb_issue_discard(sb, discard_block, entry->count); + } + err = ext4_mb_load_buddy(sb, entry->group, &e4b); /* we expect to find existing buddy because it's pinned */ BUG_ON(err != 0); @@ -2555,16 +2566,6 @@ static void release_blocks_on_commit(journal_t *journal, transaction_t *txn) page_cache_release(e4b.bd_bitmap_page); } ext4_unlock_group(sb, entry->group); - if (test_opt(sb, DISCARD)) { - ext4_fsblk_t discard_block; - - discard_block = entry->start_blk + - ext4_group_first_block_no(sb, entry->group); - trace_ext4_discard_blocks(sb, - (unsigned long long)discard_block, - entry->count); - sb_issue_discard(sb, discard_block, entry->count); - } kmem_cache_free(ext4_free_ext_cachep, entry); ext4_mb_release_desc(&e4b); } -- cgit v0.10.2 From ae7c9b70dcb4313ea3dbcc9a2f240dae6c2b50c0 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Mon, 19 Apr 2010 11:23:43 -0700 Subject: x86, mrst: Conditionally register cpu hotplug notifier for apbt APB timer is used on Moorestown platforms but not on a standard PC. If APB timer code is compiled in but not initialized at run-time due to lack of FW reported SFI table, kernel would panic when the non-boot CPUs are offlined and notifier is called. https://bugzilla.kernel.org/show_bug.cgi?id=15786 This patch ensures CPU hotplug notifier for APB timer is only registered when the APBT timer block is initialized. Signed-off-by: Jacob Pan LKML-Reference: <1271701423-1162-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index ff469e4..a353475 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -429,7 +429,7 @@ static int apbt_cpuhp_notify(struct notifier_block *n, static __init int apbt_late_init(void) { - if (disable_apbt_percpu) + if (disable_apbt_percpu || !apb_timer_block_enabled) return 0; /* This notifier should be called after workqueue is ready */ hotcpu_notifier(apbt_cpuhp_notify, -20); -- cgit v0.10.2 From 8eabf95cb17253a3ac72b1a62ce8a80b3efecd62 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 20 Apr 2010 03:20:05 +0000 Subject: bridge: add a missing ntohs() grec_nsrcs is in network order, we should convert to host horder in br_multicast_igmp3_report() Signed-off-by: Eric Dumazet Acked-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index f29ada8..386c1536 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -727,7 +727,7 @@ static int br_multicast_igmp3_report(struct net_bridge *br, group = grec->grec_mca; type = grec->grec_type; - len += grec->grec_nsrcs * 4; + len += ntohs(grec->grec_nsrcs) * 4; if (!pskb_may_pull(skb, len)) return -EINVAL; -- cgit v0.10.2 From 04de0816173c86948b75da93a6344a0a02bbec4d Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Tue, 20 Apr 2010 14:49:01 +0200 Subject: pcmcia: pcmcia_dev_present bugfix pcmcia_dev_present is in and by itself buggy. Add a note specifying why it is broken, and replace the broken locking -- taking a mutex is a bad idea in IRQ context, from which this function is rarely called -- by an atomic_t. Signed-off-by: Dominik Brodowski diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 4014cf8..92a5af8 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -335,7 +335,6 @@ static void pcmcia_card_remove(struct pcmcia_socket *s, struct pcmcia_device *le mutex_lock(&s->ops_mutex); list_del(&p_dev->socket_device_list); - p_dev->_removed = 1; mutex_unlock(&s->ops_mutex); dev_dbg(&p_dev->dev, "unregistering device\n"); @@ -654,14 +653,7 @@ static int pcmcia_requery_callback(struct device *dev, void * _data) static void pcmcia_requery(struct pcmcia_socket *s) { - int present, has_pfc; - - mutex_lock(&s->ops_mutex); - present = s->pcmcia_state.present; - mutex_unlock(&s->ops_mutex); - - if (!present) - return; + int has_pfc; if (s->functions == 0) { pcmcia_card_add(s); @@ -1260,9 +1252,7 @@ static int ds_event(struct pcmcia_socket *skt, event_t event, int priority) switch (event) { case CS_EVENT_CARD_REMOVAL: - mutex_lock(&s->ops_mutex); - s->pcmcia_state.present = 0; - mutex_unlock(&s->ops_mutex); + atomic_set(&skt->present, 0); pcmcia_card_remove(skt, NULL); handle_event(skt, event); mutex_lock(&s->ops_mutex); @@ -1271,9 +1261,9 @@ static int ds_event(struct pcmcia_socket *skt, event_t event, int priority) break; case CS_EVENT_CARD_INSERTION: + atomic_set(&skt->present, 1); mutex_lock(&s->ops_mutex); s->pcmcia_state.has_pfc = 0; - s->pcmcia_state.present = 1; destroy_cis_cache(s); /* to be on the safe side... */ mutex_unlock(&s->ops_mutex); pcmcia_card_add(skt); @@ -1313,7 +1303,13 @@ static int ds_event(struct pcmcia_socket *skt, event_t event, int priority) return 0; } /* ds_event */ - +/* + * NOTE: This is racy. There's no guarantee the card will still be + * physically present, even if the call to this function returns + * non-NULL. Furthermore, the device driver most likely is unbound + * almost immediately, so the timeframe where pcmcia_dev_present + * returns NULL is probably really really small. + */ struct pcmcia_device *pcmcia_dev_present(struct pcmcia_device *_p_dev) { struct pcmcia_device *p_dev; @@ -1323,22 +1319,9 @@ struct pcmcia_device *pcmcia_dev_present(struct pcmcia_device *_p_dev) if (!p_dev) return NULL; - mutex_lock(&p_dev->socket->ops_mutex); - if (!p_dev->socket->pcmcia_state.present) - goto out; + if (atomic_read(&p_dev->socket->present) != 0) + ret = p_dev; - if (p_dev->socket->pcmcia_state.dead) - goto out; - - if (p_dev->_removed) - goto out; - - if (p_dev->suspended) - goto out; - - ret = p_dev; - out: - mutex_unlock(&p_dev->socket->ops_mutex); pcmcia_put_dev(p_dev); return ret; } @@ -1388,6 +1371,8 @@ static int __devinit pcmcia_bus_add_socket(struct device *dev, return ret; } + atomic_set(&socket->present, 0); + return 0; } @@ -1399,10 +1384,6 @@ static void pcmcia_bus_remove_socket(struct device *dev, if (!socket) return; - mutex_lock(&socket->ops_mutex); - socket->pcmcia_state.dead = 1; - mutex_unlock(&socket->ops_mutex); - pccard_register_pcmcia(socket, NULL); /* unregister any unbound devices */ diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index d57847f..aab3c13 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -26,6 +26,7 @@ #ifdef __KERNEL__ #include #include +#include /* * PCMCIA device drivers (16-bit cards only; 32-bit cards require CardBus @@ -94,10 +95,8 @@ struct pcmcia_device { config_req_t conf; window_handle_t win; - /* Is the device suspended, or in the process of - * being removed? */ + /* Is the device suspended? */ u16 suspended:1; - u16 _removed:1; /* Flags whether io, irq, win configurations were * requested, and whether the configuration is "locked" */ @@ -115,7 +114,7 @@ struct pcmcia_device { u16 has_card_id:1; u16 has_func_id:1; - u16 reserved:3; + u16 reserved:4; u8 func_id; u16 manf_id; diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h index 2e488b6..344705c 100644 --- a/include/pcmcia/ss.h +++ b/include/pcmcia/ss.h @@ -224,18 +224,16 @@ struct pcmcia_socket { /* 16-bit state: */ struct { - /* PCMCIA card is present in socket */ - u8 present:1; /* "master" ioctl is used */ u8 busy:1; - /* pcmcia module is being unloaded */ - u8 dead:1; /* the PCMCIA card consists of two pseudo devices */ u8 has_pfc:1; - u8 reserved:4; + u8 reserved:6; } pcmcia_state; + /* non-zero if PCMCIA card is present */ + atomic_t present; #ifdef CONFIG_PCMCIA_IOCTL struct user_info_t *user; -- cgit v0.10.2 From 4260415f6a3b92c5c986398d96c314df37a4ccbf Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 19 Apr 2010 10:15:03 +0100 Subject: ARM: fix build error in arch/arm/kernel/process.c /tmp/ccJ3ssZW.s: Assembler messages: /tmp/ccJ3ssZW.s:1952: Error: can't resolve `.text' {.text section} - `.LFB1077' This is caused because: .section .data .section .text .section .text .previous does not return us to the .text section, but the .data section; this makes use of .previous dangerous if the ordering of previous sections is not known. Fix up the other users of .previous; .pushsection and .popsection are a safer pairing to use than .section and .previous. Signed-off-by: Russell King diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 00f46d9..6e8f05c 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -149,10 +149,10 @@ #define USER(x...) \ 9999: x; \ - .section __ex_table,"a"; \ + .pushsection __ex_table,"a"; \ .align 3; \ .long 9999b,9001f; \ - .previous + .popsection /* * SMP data memory barrier @@ -193,10 +193,10 @@ .error "Unsupported inc macro argument" .endif - .section __ex_table,"a" + .pushsection __ex_table,"a" .align 3 .long 9999b, \abort - .previous + .popsection .endm .macro usracc, instr, reg, ptr, inc, cond, rept, abort @@ -234,10 +234,10 @@ .error "Unsupported inc macro argument" .endif - .section __ex_table,"a" + .pushsection __ex_table,"a" .align 3 .long 9999b, \abort - .previous + .popsection .endr .endm diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index bfcc159..540a044 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -21,14 +21,14 @@ "2: strt %0, [%2]\n" \ " mov %0, #0\n" \ "3:\n" \ - " .section __ex_table,\"a\"\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 4f, 2b, 4f\n" \ - " .previous\n" \ - " .section .fixup,\"ax\"\n" \ + " .popsection\n" \ + " .pushsection .fixup,\"ax\"\n" \ "4: mov %0, %4\n" \ " b 3b\n" \ - " .previous" \ + " .popsection" \ : "=&r" (ret), "=&r" (oldval) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -102,14 +102,14 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) " it eq @ explicit IT needed for the 2b label\n" "2: streqt %2, [%3]\n" "3:\n" - " .section __ex_table,\"a\"\n" + " .pushsection __ex_table,\"a\"\n" " .align 3\n" " .long 1b, 4f, 2b, 4f\n" - " .previous\n" - " .section .fixup,\"ax\"\n" + " .popsection\n" + " .pushsection .fixup,\"ax\"\n" "4: mov %0, %4\n" " b 3b\n" - " .previous" + " .popsection" : "=&r" (val) : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT) : "cc", "memory"); diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 1d6bd40..33e4a48 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -229,16 +229,16 @@ do { \ __asm__ __volatile__( \ "1: ldrbt %1,[%2]\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " mov %1, #0\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err), "=&r" (x) \ : "r" (addr), "i" (-EFAULT) \ : "cc") @@ -265,16 +265,16 @@ do { \ __asm__ __volatile__( \ "1: ldrt %1,[%2]\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " mov %1, #0\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err), "=&r" (x) \ : "r" (addr), "i" (-EFAULT) \ : "cc") @@ -310,15 +310,15 @@ do { \ __asm__ __volatile__( \ "1: strbt %1,[%2]\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err) \ : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ : "cc") @@ -343,15 +343,15 @@ do { \ __asm__ __volatile__( \ "1: strt %1,[%2]\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err) \ : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ : "cc") @@ -371,16 +371,16 @@ do { \ THUMB( "1: strt " __reg_oper1 ", [%1]\n" ) \ THUMB( "2: strt " __reg_oper0 ", [%1, #4]\n" ) \ "3:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "4: mov %0, %3\n" \ " b 3b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 4b\n" \ " .long 2b, 4b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err), "+r" (__pu_addr) \ : "r" (x), "i" (-EFAULT) \ : "cc") diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 6c5cf36..e6a0fb0 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -523,16 +523,16 @@ ENDPROC(__und_usr) /* * The out of line fixup for the ldrt above. */ - .section .fixup, "ax" + .pushsection .fixup, "ax" 4: mov pc, r9 - .previous - .section __ex_table,"a" + .popsection + .pushsection __ex_table,"a" .long 1b, 4b #if __LINUX_ARM_ARCH__ >= 7 .long 2b, 4b .long 3b, 4b #endif - .previous + .popsection /* * Check whether the instruction is a co-processor instruction. @@ -679,7 +679,7 @@ do_fpe: .data ENTRY(fp_enter) .word no_fp - .previous + .text ENTRY(no_fp) mov pc, lr diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index c638427..0298286 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -62,15 +62,15 @@ int ftrace_modify_code(unsigned long pc, unsigned char *old_code, " movne %0, #2 \n" "3:\n" - ".section .fixup, \"ax\"\n" + ".pushsection .fixup, \"ax\"\n" "4: mov %0, #1 \n" " b 3b \n" - ".previous\n" + ".popsection\n" - ".section __ex_table, \"a\"\n" + ".pushsection __ex_table, \"a\"\n" " .long 1b, 4b \n" " .long 2b, 4b \n" - ".previous\n" + ".popsection\n" : "=r"(err), "=r"(replaced) : "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced) diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 0e12e0a..acf5e6f 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -355,7 +355,7 @@ EXPORT_SYMBOL(dump_fpu); * the thread function, and r3 points to the exit function. */ extern void kernel_thread_helper(void); -asm( ".section .text\n" +asm( ".pushsection .text\n" " .align\n" " .type kernel_thread_helper, #function\n" "kernel_thread_helper:\n" @@ -363,11 +363,11 @@ asm( ".section .text\n" " mov lr, r3\n" " mov pc, r2\n" " .size kernel_thread_helper, . - kernel_thread_helper\n" -" .previous"); +" .popsection"); #ifdef CONFIG_ARM_UNWIND extern void kernel_thread_exit(long code); -asm( ".section .text\n" +asm( ".pushsection .text\n" " .align\n" " .type kernel_thread_exit, #function\n" "kernel_thread_exit:\n" @@ -377,7 +377,7 @@ asm( ".section .text\n" " nop\n" " .fnend\n" " .size kernel_thread_exit, . - kernel_thread_exit\n" -" .previous"); +" .popsection"); #else #define kernel_thread_exit do_exit #endif diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index aaf7220..a673297 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -110,13 +110,13 @@ no_frame: ldmfd sp!, {r4 - r8, pc} ENDPROC(__backtrace) ENDPROC(c_backtrace) - .section __ex_table,"a" + .pushsection __ex_table,"a" .align 3 .long 1001b, 1006b .long 1002b, 1006b .long 1003b, 1006b .long 1004b, 1006b - .previous + .popsection #define instr r4 #define reg r5 diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S index 1279abd..5e3f996 100644 --- a/arch/arm/lib/clear_user.S +++ b/arch/arm/lib/clear_user.S @@ -46,8 +46,8 @@ USER( strnebt r2, [r0]) ldmfd sp!, {r1, pc} ENDPROC(__clear_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 9001: ldmfd sp!, {r0, pc} - .previous + .popsection diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S index e4fe124..66a477a 100644 --- a/arch/arm/lib/copy_from_user.S +++ b/arch/arm/lib/copy_from_user.S @@ -90,7 +90,7 @@ ENTRY(__copy_from_user) ENDPROC(__copy_from_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 copy_abort_preamble ldmfd sp!, {r1, r2} @@ -100,5 +100,5 @@ ENDPROC(__copy_from_user) bl __memzero ldr r0, [sp], #4 copy_abort_end - .previous + .popsection diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S index 1a71e15..027b69b 100644 --- a/arch/arm/lib/copy_to_user.S +++ b/arch/arm/lib/copy_to_user.S @@ -94,12 +94,12 @@ WEAK(__copy_to_user) ENDPROC(__copy_to_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 copy_abort_preamble ldmfd sp!, {r1, r2, r3} sub r0, r0, r1 rsb r0, r0, r2 copy_abort_end - .previous + .popsection diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S index fd0e9dc..59ff6fd 100644 --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -68,7 +68,7 @@ * so properly, we would have to add in whatever registers were loaded before * the fault, which, with the current asm above is not predictable. */ - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 4 9001: mov r4, #-EFAULT ldr r5, [fp, #4] @ *err_ptr @@ -80,4 +80,4 @@ strneb r0, [r1], #1 bne 9002b load_regs - .previous + .popsection diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index a1814d9..b1631a7 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -64,9 +64,9 @@ __get_user_bad: mov pc, lr ENDPROC(__get_user_bad) -.section __ex_table, "a" +.pushsection __ex_table, "a" .long 1b, __get_user_bad .long 2b, __get_user_bad .long 3b, __get_user_bad .long 4b, __get_user_bad -.previous +.popsection diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 02fedbf..5a01a23 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -81,11 +81,11 @@ __put_user_bad: mov pc, lr ENDPROC(__put_user_bad) -.section __ex_table, "a" +.pushsection __ex_table, "a" .long 1b, __put_user_bad .long 2b, __put_user_bad .long 3b, __put_user_bad .long 4b, __put_user_bad .long 5b, __put_user_bad .long 6b, __put_user_bad -.previous +.popsection diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S index 1c9814f..f202d7b 100644 --- a/arch/arm/lib/strncpy_from_user.S +++ b/arch/arm/lib/strncpy_from_user.S @@ -33,11 +33,11 @@ ENTRY(__strncpy_from_user) mov pc, lr ENDPROC(__strncpy_from_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 9001: mov r3, #0 strb r3, [r0, #0] @ null terminate mov r0, #-EFAULT mov pc, lr - .previous + .popsection diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S index 7855b29..0ecbb45 100644 --- a/arch/arm/lib/strnlen_user.S +++ b/arch/arm/lib/strnlen_user.S @@ -33,8 +33,8 @@ ENTRY(__strnlen_user) mov pc, lr ENDPROC(__strnlen_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 9001: mov r0, #0 mov pc, lr - .previous + .popsection diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S index ffdd274..fee9f6f 100644 --- a/arch/arm/lib/uaccess.S +++ b/arch/arm/lib/uaccess.S @@ -279,10 +279,10 @@ USER( strgtbt r3, [r0], #1) @ May fault b .Lc2u_finished ENDPROC(__copy_to_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 9001: ldmfd sp!, {r0, r4 - r7, pc} - .previous + .popsection /* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n); * Purpose : copy a block from user memory to kernel memory @@ -545,7 +545,7 @@ USER( ldrgtbt r3, [r1], #1) @ May fault b .Lcfu_finished ENDPROC(__copy_from_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 /* * We took an exception. r0 contains a pointer to @@ -559,5 +559,5 @@ ENDPROC(__copy_from_user) blne __memzero mov r0, r4 ldmfd sp!, {r4 - r7, pc} - .previous + .popsection diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index edddd66..a2ab51f 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -166,15 +166,15 @@ union offset_union { THUMB( "1: "ins" %1, [%2]\n" ) \ THUMB( " add %2, %2, #1\n" ) \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, #1\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous\n" \ + " .popsection\n" \ : "=r" (err), "=&r" (val), "=r" (addr) \ : "0" (err), "2" (addr)) @@ -226,16 +226,16 @@ union offset_union { " mov %1, %1, "NEXT_BYTE"\n" \ "2: "ins" %1, [%2]\n" \ "3:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "4: mov %0, #1\n" \ " b 3b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 4b\n" \ " .long 2b, 4b\n" \ - " .previous\n" \ + " .popsection\n" \ : "=r" (err), "=&r" (v), "=&r" (a) \ : "0" (err), "1" (v), "2" (a)); \ if (err) \ @@ -266,18 +266,18 @@ union offset_union { " mov %1, %1, "NEXT_BYTE"\n" \ "4: "ins" %1, [%2]\n" \ "5:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "6: mov %0, #1\n" \ " b 5b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 6b\n" \ " .long 2b, 6b\n" \ " .long 3b, 6b\n" \ " .long 4b, 6b\n" \ - " .previous\n" \ + " .popsection\n" \ : "=r" (err), "=&r" (v), "=&r" (a) \ : "0" (err), "1" (v), "2" (a)); \ if (err) \ diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index ee77002..5c47760 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -45,7 +45,7 @@ ENTRY(cpu_sa1100_proc_init) mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland mov pc, lr - .previous + .section .text /* * cpu_sa1100_proc_fin() diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S index 48bca0d..cafa183 100644 --- a/arch/arm/nwfpe/entry.S +++ b/arch/arm/nwfpe/entry.S @@ -111,12 +111,12 @@ next: @ to fault. Emit the appropriate exception gunk to fix things up. @ ??? For some reason, faults can happen at .Lx2 even with a @ plain LDR instruction. Weird, but it seems harmless. - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 2 .Lfix: mov pc, r9 @ let the user eat segfaults - .previous + .popsection - .section __ex_table,"a" + .pushsection __ex_table,"a" .align 3 .long .Lx1, .Lfix - .previous + .popsection -- cgit v0.10.2 From 6651ffc8e8bdd5fb4b7d1867c6cfebb4f309512c Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 21 Apr 2010 00:47:15 -0700 Subject: ipv6: Fix tcp_v6_send_response transport header setting. My recent patch to remove the open-coded checksum sequence in tcp_v6_send_response broke it as we did not set the transport header pointer on the new packet. Actually, there is code there trying to set the transport header properly, but it sets it for the wrong skb ('skb' instead of 'buff'). This bug was introduced by commit a8fdf2b331b38d61fb5f11f3aec4a4f9fb2dedcb ("ipv6: Fix tcp_v6_send_response(): it didn't set skb transport header") Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index c92ebe8..075f540 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1015,7 +1015,7 @@ static void tcp_v6_send_response(struct sk_buff *skb, u32 seq, u32 ack, u32 win, skb_reserve(buff, MAX_HEADER + sizeof(struct ipv6hdr) + tot_len); t1 = (struct tcphdr *) skb_push(buff, tot_len); - skb_reset_transport_header(skb); + skb_reset_transport_header(buff); /* Swap the send and the receive. */ memset(t1, 0, sizeof(*t1)); -- cgit v0.10.2 From 05d17608a69b3ae653ea5c9857283bef3439c733 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 20 Apr 2010 00:25:58 +0000 Subject: net: Fix an RCU warning in dev_pick_tx() Fix the following RCU warning in dev_pick_tx(): =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- net/core/dev.c:1993 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by swapper/0: #0: (&idev->mc_ifc_timer){+.-...}, at: [] run_timer_softirq+0x17b/0x278 #1: (rcu_read_lock_bh){.+....}, at: [] dev_queue_xmit+0x14e/0x4dc stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.34-rc5-cachefs #4 Call Trace: [] lockdep_rcu_dereference+0xaa/0xb2 [] dev_queue_xmit+0x259/0x4dc [] ? dev_queue_xmit+0x14e/0x4dc [] ? trace_hardirqs_on+0xd/0xf [] ? local_bh_enable_ip+0xbc/0xc1 [] neigh_resolve_output+0x24b/0x27c [] ip6_output_finish+0x7c/0xb4 [] ip6_output2+0x256/0x261 [] ? trace_hardirqs_on+0xd/0xf [] ip6_output+0xbbc/0xbcb [] ? fib6_force_start_gc+0x2b/0x2d [] mld_sendpack+0x273/0x39d [] ? mld_sendpack+0x0/0x39d [] ? mark_held_locks+0x52/0x70 [] mld_ifc_timer_expire+0x24f/0x288 [] run_timer_softirq+0x1ec/0x278 [] ? run_timer_softirq+0x17b/0x278 [] ? mld_ifc_timer_expire+0x0/0x288 [] ? __do_softirq+0x69/0x140 [] __do_softirq+0xa2/0x140 [] call_softirq+0x1c/0x28 [] do_softirq+0x38/0x80 [] irq_exit+0x45/0x47 [] smp_apic_timer_interrupt+0x88/0x96 [] apic_timer_interrupt+0x13/0x20 [] ? __atomic_notifier_call_chain+0x0/0x86 [] ? mwait_idle+0x6e/0x78 [] ? mwait_idle+0x65/0x78 [] cpu_idle+0x4d/0x83 [] rest_init+0xb9/0xc0 [] ? rest_init+0x0/0xc0 [] start_kernel+0x392/0x39d [] x86_64_start_reservations+0xb3/0xb7 [] x86_64_start_kernel+0xe4/0xeb An rcu_dereference() should be an rcu_dereference_bh(). Signed-off-by: David Howells Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 92584bf..f769098 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1990,7 +1990,7 @@ static struct netdev_queue *dev_pick_tx(struct net_device *dev, queue_index = skb_tx_hash(dev, skb); if (sk) { - struct dst_entry *dst = rcu_dereference(sk->sk_dst_cache); + struct dst_entry *dst = rcu_dereference_bh(sk->sk_dst_cache); if (dst && skb_dst(skb) == dst) sk_tx_queue_set(sk, queue_index); -- cgit v0.10.2 From a534dbe96e9929c7245924d8252d89048c23d569 Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Wed, 14 Apr 2010 20:54:03 +0200 Subject: block: ensure jiffies wrap is handled correctly in blk_rq_timed_out_timer blk_rq_timed_out_timer() relied on blk_add_timer() never returning a timer value of zero, but commit 7838c15b8dd18e78a523513749e5b54bda07b0cb removed the code that bumped this value when it was zero. Therefore when jiffies is near wrap we could get unlucky & not set the timeout value correctly. This patch uses a flag to indicate that the timeout value was set and so handles jiffies wrap correctly, and it keeps all the logic in one function so should be easier to maintain in the future. Signed-off-by: Richard Kennedy Cc: stable@kernel.org Signed-off-by: Jens Axboe diff --git a/block/blk-timeout.c b/block/blk-timeout.c index 1ba7e0a..4f0c06c 100644 --- a/block/blk-timeout.c +++ b/block/blk-timeout.c @@ -109,6 +109,7 @@ void blk_rq_timed_out_timer(unsigned long data) struct request_queue *q = (struct request_queue *) data; unsigned long flags, next = 0; struct request *rq, *tmp; + int next_set = 0; spin_lock_irqsave(q->queue_lock, flags); @@ -122,16 +123,13 @@ void blk_rq_timed_out_timer(unsigned long data) if (blk_mark_rq_complete(rq)) continue; blk_rq_timed_out(rq); - } else if (!next || time_after(next, rq->deadline)) + } else if (!next_set || time_after(next, rq->deadline)) { next = rq->deadline; + next_set = 1; + } } - /* - * next can never be 0 here with the list non-empty, since we always - * bump ->deadline to 1 so we can detect if the timer was ever added - * or not. See comment in blk_add_timer() - */ - if (next) + if (next_set) mod_timer(&q->timeout, round_jiffies_up(next)); spin_unlock_irqrestore(q->queue_lock, flags); -- cgit v0.10.2 From 1c0b28b1ee90261a0a27194e6684dd2837785064 Mon Sep 17 00:00:00 2001 From: "Hans J. Koch" Date: Wed, 21 Apr 2010 00:18:06 +0000 Subject: can: Fix possible NULL pointer dereference in ems_usb.c In ems_usb_probe(), a pointer is dereferenced after making sure it is NULL... This patch replaces netdev->dev.parent with &intf->dev in dev_err() calls to avoid this. Signed-off-by: "Hans J. Koch" Acked-by: Wolfgang Grandegger Signed-off-by: David S. Miller diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index 3345109..d800b59 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -1006,7 +1006,7 @@ static int ems_usb_probe(struct usb_interface *intf, netdev = alloc_candev(sizeof(struct ems_usb), MAX_TX_URBS); if (!netdev) { - dev_err(netdev->dev.parent, "Couldn't alloc candev\n"); + dev_err(&intf->dev, "ems_usb: Couldn't alloc candev\n"); return -ENOMEM; } @@ -1036,20 +1036,20 @@ static int ems_usb_probe(struct usb_interface *intf, dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->intr_urb) { - dev_err(netdev->dev.parent, "Couldn't alloc intr URB\n"); + dev_err(&intf->dev, "Couldn't alloc intr URB\n"); goto cleanup_candev; } dev->intr_in_buffer = kzalloc(INTR_IN_BUFFER_SIZE, GFP_KERNEL); if (!dev->intr_in_buffer) { - dev_err(netdev->dev.parent, "Couldn't alloc Intr buffer\n"); + dev_err(&intf->dev, "Couldn't alloc Intr buffer\n"); goto cleanup_intr_urb; } dev->tx_msg_buffer = kzalloc(CPC_HEADER_SIZE + sizeof(struct ems_cpc_msg), GFP_KERNEL); if (!dev->tx_msg_buffer) { - dev_err(netdev->dev.parent, "Couldn't alloc Tx buffer\n"); + dev_err(&intf->dev, "Couldn't alloc Tx buffer\n"); goto cleanup_intr_in_buffer; } -- cgit v0.10.2 From bc8e4b954e463716a57d8113dd50ae9d47b682a7 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Wed, 21 Apr 2010 16:25:30 -0700 Subject: xfrm6: ensure to use the same dev when building a bundle When building a bundle, we set dst.dev and rt6.rt6i_idev. We must ensure to set the same device for both fields. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index ae18165..00bf7c9 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -124,7 +124,7 @@ static int xfrm6_fill_dst(struct xfrm_dst *xdst, struct net_device *dev, xdst->u.dst.dev = dev; dev_hold(dev); - xdst->u.rt6.rt6i_idev = in6_dev_get(rt->u.dst.dev); + xdst->u.rt6.rt6i_idev = in6_dev_get(dev); if (!xdst->u.rt6.rt6i_idev) return -ENODEV; -- cgit v0.10.2 From df245dce572bc22b230a05532a3f9daee50effb5 Mon Sep 17 00:00:00 2001 From: Alexander Kurz Date: Fri, 16 Apr 2010 03:01:01 +0000 Subject: net: 3c574_cs fix stats.tx_bytes counter Update the stats counter calculation in 3c574_cs, similar to the method used in 3c589_cs. This corrects the contents of the counter on tests using a "Megahertz 574B" card. [linux@dominikbrodowski.net: clean up commit message] Signed-off-by: Alexander Kurz Signed-off-by: Dominik Brodowski Signed-off-by: David S. Miller diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 3d1d3a7..757f87b 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -781,8 +781,13 @@ static netdev_tx_t el3_start_xmit(struct sk_buff *skb, inw(ioaddr + EL3_STATUS)); spin_lock_irqsave(&lp->window_lock, flags); + + dev->stats.tx_bytes += skb->len; + + /* Put out the doubleword header... */ outw(skb->len, ioaddr + TX_FIFO); outw(0, ioaddr + TX_FIFO); + /* ... and the packet rounded to a doubleword. */ outsl(ioaddr + TX_FIFO, skb->data, (skb->len+3)>>2); dev->trans_start = jiffies; @@ -1021,8 +1026,6 @@ static void update_stats(struct net_device *dev) /* BadSSD */ inb(ioaddr + 12); up = inb(ioaddr + 13); - dev->stats.tx_bytes += tx + ((up & 0xf0) << 12); - EL3WINDOW(1); } -- cgit v0.10.2 From 761172fbf672c5784b2a0d71ca2f4389eb7a2c21 Mon Sep 17 00:00:00 2001 From: Abraham Arce Date: Fri, 16 Apr 2010 14:48:43 +0000 Subject: KS8851: NULL pointer dereference if list is empty Fix NULL pointer dereference in ks8851_tx_work by checking if dequeued list is already empty before writing the packet to TX FIFO Unable to handle kernel NULL pointer dereference at virtual address 00000050 PC is at ks8851_tx_work+0xdc/0x1b0 LR is at wait_for_common+0x148/0x164 pc : [] lr : [] psr: 20000013 Backtrace: ks8851_tx_work+0x0/0x1b0 worker_thread+0x0/0x190 kthread+0x0/0x90 Signed-off-by: Abraham Arce Signed-off-by: David S. Miller diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c index 13cc1ca..9e9f9b3 100644 --- a/drivers/net/ks8851.c +++ b/drivers/net/ks8851.c @@ -722,12 +722,14 @@ static void ks8851_tx_work(struct work_struct *work) txb = skb_dequeue(&ks->txq); last = skb_queue_empty(&ks->txq); - ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA); - ks8851_wrpkt(ks, txb, last); - ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr); - ks8851_wrreg16(ks, KS_TXQCR, TXQCR_METFE); + if (txb != NULL) { + ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA); + ks8851_wrpkt(ks, txb, last); + ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr); + ks8851_wrreg16(ks, KS_TXQCR, TXQCR_METFE); - ks8851_done_tx(ks, txb); + ks8851_done_tx(ks, txb); + } } mutex_unlock(&ks->lock); -- cgit v0.10.2 From 2cec6b014da6fb4a40ba1c6556cdf9681ed3f89e Mon Sep 17 00:00:00 2001 From: andrew hendry Date: Sat, 17 Apr 2010 14:17:32 +0000 Subject: X25 fix dead unaccepted sockets 1, An X25 program binds and listens 2, calls arrive waiting to be accepted 3, Program exits without accepting 4, Sockets time out but don't get correctly cleaned up 5, cat /proc/net/x25/socket shows the dead sockets with bad inode fields. This line borrowed from AX25 sets the dying socket so the timers clean up later. Signed-off-by: Andrew Hendry Signed-off-by: David S. Miller diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c index cbddd0c..36e84e1 100644 --- a/net/x25/af_x25.c +++ b/net/x25/af_x25.c @@ -402,6 +402,7 @@ static void __x25_destroy_socket(struct sock *sk) /* * Queue the unaccepted socket for death */ + skb->sk->sk_state = TCP_LISTEN; sock_set_flag(skb->sk, SOCK_DEAD); x25_start_heartbeat(skb->sk); x25_sk(skb->sk)->state = X25_STATE_0; -- cgit v0.10.2 From 9441cad99b4b09d6b627351c2d282833868c116c Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Mon, 19 Apr 2010 15:32:20 +0000 Subject: cxgb3: fix linkup issue I encountered an issue that not to link up on cxgb3 fabric. I bisected and found that this regression was introduced by 0f07c4ee8c800923ae7918c231532a9256233eed. Correct to pass phy_addr to cphy_init() at t3_xaui_direct_phy_prep(). Signed-off-by: Hiroshi Shimamoto Acked-by: Divy Le Ray Signed-off-by: David S. Miller diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/cxgb3/ael1002.c index 5248f9e..35cd367 100644 --- a/drivers/net/cxgb3/ael1002.c +++ b/drivers/net/cxgb3/ael1002.c @@ -934,7 +934,7 @@ static struct cphy_ops xaui_direct_ops = { int t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr, const struct mdio_ops *mdio_ops) { - cphy_init(phy, adapter, MDIO_PRTAD_NONE, &xaui_direct_ops, mdio_ops, + cphy_init(phy, adapter, phy_addr, &xaui_direct_ops, mdio_ops, SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP, "10GBASE-CX4"); return 0; -- cgit v0.10.2 From a19259c3d589a014e5f47f148f74dfc44422c82b Mon Sep 17 00:00:00 2001 From: Diego Giagio Date: Sun, 18 Apr 2010 08:35:16 +0000 Subject: drivers/net/usb: Add new driver ipheth MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add new driver to use tethering with an iPhone device. After initial submission, apply fixes to fit the new driver into the kernel standards. There are still a couple of minor (almost cosmetic-level) issues, but the driver is fully functional right now. Signed-off-by: L. Alberto Giménez Signed-off-by: Diego Giagio Signed-off-by: David S. Miller diff --git a/drivers/net/Makefile b/drivers/net/Makefile index a583b50..12b280a 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -273,6 +273,7 @@ obj-$(CONFIG_USB_RTL8150) += usb/ obj-$(CONFIG_USB_HSO) += usb/ obj-$(CONFIG_USB_USBNET) += usb/ obj-$(CONFIG_USB_ZD1201) += usb/ +obj-$(CONFIG_USB_IPHETH) += usb/ obj-y += wireless/ obj-$(CONFIG_NET_TULIP) += tulip/ diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index ba56ce4..63be4ca 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -385,4 +385,16 @@ config USB_CDC_PHONET cellular modem, as found on most Nokia handsets with the "PC suite" USB profile. +config USB_IPHETH + tristate "Apple iPhone USB Ethernet driver" + default n + ---help--- + Module used to share Internet connection (tethering) from your + iPhone (Original, 3G and 3GS) to your system. + Note that you need userspace libraries and programs that are needed + to pair your device with your system and that understand the iPhone + protocol. + + For more information: http://giagio.com/wiki/moin.cgi/iPhoneEthernetDriver + endmenu diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index 82ea629..edb09c0 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -23,4 +23,5 @@ obj-$(CONFIG_USB_NET_MCS7830) += mcs7830.o obj-$(CONFIG_USB_USBNET) += usbnet.o obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o +obj-$(CONFIG_USB_IPHETH) += ipheth.o diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c new file mode 100644 index 0000000..fd10331 --- /dev/null +++ b/drivers/net/usb/ipheth.c @@ -0,0 +1,568 @@ +/* + * ipheth.c - Apple iPhone USB Ethernet driver + * + * Copyright (c) 2009 Diego Giagio + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of GIAGIO.COM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * + * Attention: iPhone device must be paired, otherwise it won't respond to our + * driver. For more info: http://giagio.com/wiki/moin.cgi/iPhoneEthernetDriver + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB_VENDOR_APPLE 0x05ac +#define USB_PRODUCT_IPHONE 0x1290 +#define USB_PRODUCT_IPHONE_3G 0x1292 +#define USB_PRODUCT_IPHONE_3GS 0x1294 + +#define IPHETH_USBINTF_CLASS 255 +#define IPHETH_USBINTF_SUBCLASS 253 +#define IPHETH_USBINTF_PROTO 1 + +#define IPHETH_BUF_SIZE 1516 +#define IPHETH_TX_TIMEOUT (5 * HZ) + +#define IPHETH_INTFNUM 2 +#define IPHETH_ALT_INTFNUM 1 + +#define IPHETH_CTRL_ENDP 0x00 +#define IPHETH_CTRL_BUF_SIZE 0x40 +#define IPHETH_CTRL_TIMEOUT (5 * HZ) + +#define IPHETH_CMD_GET_MACADDR 0x00 +#define IPHETH_CMD_CARRIER_CHECK 0x45 + +#define IPHETH_CARRIER_CHECK_TIMEOUT round_jiffies_relative(1 * HZ) +#define IPHETH_CARRIER_ON 0x04 + +static struct usb_device_id ipheth_table[] = { + { USB_DEVICE_AND_INTERFACE_INFO( + USB_VENDOR_APPLE, USB_PRODUCT_IPHONE, + IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, + IPHETH_USBINTF_PROTO) }, + { USB_DEVICE_AND_INTERFACE_INFO( + USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_3G, + IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, + IPHETH_USBINTF_PROTO) }, + { USB_DEVICE_AND_INTERFACE_INFO( + USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_3GS, + IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, + IPHETH_USBINTF_PROTO) }, + { } +}; +MODULE_DEVICE_TABLE(usb, ipheth_table); + +struct ipheth_device { + struct usb_device *udev; + struct usb_interface *intf; + struct net_device *net; + struct sk_buff *tx_skb; + struct urb *tx_urb; + struct urb *rx_urb; + unsigned char *tx_buf; + unsigned char *rx_buf; + unsigned char *ctrl_buf; + u8 bulk_in; + u8 bulk_out; + struct delayed_work carrier_work; +}; + +static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags); + +static int ipheth_alloc_urbs(struct ipheth_device *iphone) +{ + struct urb *tx_urb = NULL; + struct urb *rx_urb = NULL; + u8 *tx_buf = NULL; + u8 *rx_buf = NULL; + + tx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (tx_urb == NULL) + goto error; + + rx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (rx_urb == NULL) + goto error; + + tx_buf = usb_buffer_alloc(iphone->udev, + IPHETH_BUF_SIZE, + GFP_KERNEL, + &tx_urb->transfer_dma); + if (tx_buf == NULL) + goto error; + + rx_buf = usb_buffer_alloc(iphone->udev, + IPHETH_BUF_SIZE, + GFP_KERNEL, + &rx_urb->transfer_dma); + if (rx_buf == NULL) + goto error; + + + iphone->tx_urb = tx_urb; + iphone->rx_urb = rx_urb; + iphone->tx_buf = tx_buf; + iphone->rx_buf = rx_buf; + return 0; + +error: + usb_buffer_free(iphone->udev, IPHETH_BUF_SIZE, rx_buf, + rx_urb->transfer_dma); + usb_buffer_free(iphone->udev, IPHETH_BUF_SIZE, tx_buf, + tx_urb->transfer_dma); + usb_free_urb(rx_urb); + usb_free_urb(tx_urb); + return -ENOMEM; +} + +static void ipheth_free_urbs(struct ipheth_device *iphone) +{ + usb_buffer_free(iphone->udev, IPHETH_BUF_SIZE, iphone->rx_buf, + iphone->rx_urb->transfer_dma); + usb_buffer_free(iphone->udev, IPHETH_BUF_SIZE, iphone->tx_buf, + iphone->tx_urb->transfer_dma); + usb_free_urb(iphone->rx_urb); + usb_free_urb(iphone->tx_urb); +} + +static void ipheth_kill_urbs(struct ipheth_device *dev) +{ + usb_kill_urb(dev->tx_urb); + usb_kill_urb(dev->rx_urb); +} + +static void ipheth_rcvbulk_callback(struct urb *urb) +{ + struct ipheth_device *dev; + struct sk_buff *skb; + int status; + char *buf; + int len; + + dev = urb->context; + if (dev == NULL) + return; + + status = urb->status; + switch (status) { + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + return; + case 0: + break; + default: + err("%s: urb status: %d", __func__, urb->status); + return; + } + + len = urb->actual_length; + buf = urb->transfer_buffer; + + skb = dev_alloc_skb(NET_IP_ALIGN + len); + if (!skb) { + err("%s: dev_alloc_skb: -ENOMEM", __func__); + dev->net->stats.rx_dropped++; + return; + } + + skb_reserve(skb, NET_IP_ALIGN); + memcpy(skb_put(skb, len), buf + NET_IP_ALIGN, len - NET_IP_ALIGN); + skb->dev = dev->net; + skb->protocol = eth_type_trans(skb, dev->net); + + dev->net->stats.rx_packets++; + dev->net->stats.rx_bytes += len; + + netif_rx(skb); + ipheth_rx_submit(dev, GFP_ATOMIC); +} + +static void ipheth_sndbulk_callback(struct urb *urb) +{ + struct ipheth_device *dev; + + dev = urb->context; + if (dev == NULL) + return; + + if (urb->status != 0 && + urb->status != -ENOENT && + urb->status != -ECONNRESET && + urb->status != -ESHUTDOWN) + err("%s: urb status: %d", __func__, urb->status); + + dev_kfree_skb_irq(dev->tx_skb); + netif_wake_queue(dev->net); +} + +static int ipheth_carrier_set(struct ipheth_device *dev) +{ + struct usb_device *udev = dev->udev; + int retval; + + retval = usb_control_msg(udev, + usb_rcvctrlpipe(udev, IPHETH_CTRL_ENDP), + IPHETH_CMD_CARRIER_CHECK, /* request */ + 0xc0, /* request type */ + 0x00, /* value */ + 0x02, /* index */ + dev->ctrl_buf, IPHETH_CTRL_BUF_SIZE, + IPHETH_CTRL_TIMEOUT); + if (retval < 0) { + err("%s: usb_control_msg: %d", __func__, retval); + return retval; + } + + if (dev->ctrl_buf[0] == IPHETH_CARRIER_ON) + netif_carrier_on(dev->net); + else + netif_carrier_off(dev->net); + + return 0; +} + +static void ipheth_carrier_check_work(struct work_struct *work) +{ + struct ipheth_device *dev = container_of(work, struct ipheth_device, + carrier_work.work); + + ipheth_carrier_set(dev); + schedule_delayed_work(&dev->carrier_work, IPHETH_CARRIER_CHECK_TIMEOUT); +} + +static int ipheth_get_macaddr(struct ipheth_device *dev) +{ + struct usb_device *udev = dev->udev; + struct net_device *net = dev->net; + int retval; + + retval = usb_control_msg(udev, + usb_rcvctrlpipe(udev, IPHETH_CTRL_ENDP), + IPHETH_CMD_GET_MACADDR, /* request */ + 0xc0, /* request type */ + 0x00, /* value */ + 0x02, /* index */ + dev->ctrl_buf, + IPHETH_CTRL_BUF_SIZE, + IPHETH_CTRL_TIMEOUT); + if (retval < 0) { + err("%s: usb_control_msg: %d", __func__, retval); + } else if (retval < ETH_ALEN) { + err("%s: usb_control_msg: short packet: %d bytes", + __func__, retval); + retval = -EINVAL; + } else { + memcpy(net->dev_addr, dev->ctrl_buf, ETH_ALEN); + retval = 0; + } + + return retval; +} + +static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags) +{ + struct usb_device *udev = dev->udev; + int retval; + + usb_fill_bulk_urb(dev->rx_urb, udev, + usb_rcvbulkpipe(udev, dev->bulk_in), + dev->rx_buf, IPHETH_BUF_SIZE, + ipheth_rcvbulk_callback, + dev); + dev->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + retval = usb_submit_urb(dev->rx_urb, mem_flags); + if (retval) + err("%s: usb_submit_urb: %d", __func__, retval); + return retval; +} + +static int ipheth_open(struct net_device *net) +{ + struct ipheth_device *dev = netdev_priv(net); + struct usb_device *udev = dev->udev; + int retval = 0; + + usb_set_interface(udev, IPHETH_INTFNUM, IPHETH_ALT_INTFNUM); + + retval = ipheth_carrier_set(dev); + if (retval) + return retval; + + retval = ipheth_rx_submit(dev, GFP_KERNEL); + if (retval) + return retval; + + schedule_delayed_work(&dev->carrier_work, IPHETH_CARRIER_CHECK_TIMEOUT); + netif_start_queue(net); + return retval; +} + +static int ipheth_close(struct net_device *net) +{ + struct ipheth_device *dev = netdev_priv(net); + + cancel_delayed_work_sync(&dev->carrier_work); + netif_stop_queue(net); + return 0; +} + +static int ipheth_tx(struct sk_buff *skb, struct net_device *net) +{ + struct ipheth_device *dev = netdev_priv(net); + struct usb_device *udev = dev->udev; + int retval; + + /* Paranoid */ + if (skb->len > IPHETH_BUF_SIZE) { + WARN(1, "%s: skb too large: %d bytes", __func__, skb->len); + dev->net->stats.tx_dropped++; + dev_kfree_skb_irq(skb); + return NETDEV_TX_OK; + } + + memcpy(dev->tx_buf, skb->data, skb->len); + if (skb->len < IPHETH_BUF_SIZE) + memset(dev->tx_buf + skb->len, 0, IPHETH_BUF_SIZE - skb->len); + + usb_fill_bulk_urb(dev->tx_urb, udev, + usb_sndbulkpipe(udev, dev->bulk_out), + dev->tx_buf, IPHETH_BUF_SIZE, + ipheth_sndbulk_callback, + dev); + dev->tx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + retval = usb_submit_urb(dev->tx_urb, GFP_ATOMIC); + if (retval) { + err("%s: usb_submit_urb: %d", __func__, retval); + dev->net->stats.tx_errors++; + dev_kfree_skb_irq(skb); + } else { + dev->tx_skb = skb; + + dev->net->stats.tx_packets++; + dev->net->stats.tx_bytes += skb->len; + netif_stop_queue(net); + } + + return NETDEV_TX_OK; +} + +static void ipheth_tx_timeout(struct net_device *net) +{ + struct ipheth_device *dev = netdev_priv(net); + + err("%s: TX timeout", __func__); + dev->net->stats.tx_errors++; + usb_unlink_urb(dev->tx_urb); +} + +static struct net_device_stats *ipheth_stats(struct net_device *net) +{ + struct ipheth_device *dev = netdev_priv(net); + return &dev->net->stats; +} + +static u32 ipheth_ethtool_op_get_link(struct net_device *net) +{ + struct ipheth_device *dev = netdev_priv(net); + return netif_carrier_ok(dev->net); +} + +static struct ethtool_ops ops = { + .get_link = ipheth_ethtool_op_get_link +}; + +static const struct net_device_ops ipheth_netdev_ops = { + .ndo_open = &ipheth_open, + .ndo_stop = &ipheth_close, + .ndo_start_xmit = &ipheth_tx, + .ndo_tx_timeout = &ipheth_tx_timeout, + .ndo_get_stats = &ipheth_stats, +}; + +static struct device_type ipheth_type = { + .name = "wwan", +}; + +static int ipheth_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_host_interface *hintf; + struct usb_endpoint_descriptor *endp; + struct ipheth_device *dev; + struct net_device *netdev; + int i; + int retval; + + netdev = alloc_etherdev(sizeof(struct ipheth_device)); + if (!netdev) + return -ENOMEM; + + netdev->netdev_ops = &ipheth_netdev_ops; + netdev->watchdog_timeo = IPHETH_TX_TIMEOUT; + strcpy(netdev->name, "wwan%d"); + + dev = netdev_priv(netdev); + dev->udev = udev; + dev->net = netdev; + dev->intf = intf; + + /* Set up endpoints */ + hintf = usb_altnum_to_altsetting(intf, IPHETH_ALT_INTFNUM); + if (hintf == NULL) { + retval = -ENODEV; + err("Unable to find alternate settings interface"); + goto err_endpoints; + } + + for (i = 0; i < hintf->desc.bNumEndpoints; i++) { + endp = &hintf->endpoint[i].desc; + if (usb_endpoint_is_bulk_in(endp)) + dev->bulk_in = endp->bEndpointAddress; + else if (usb_endpoint_is_bulk_out(endp)) + dev->bulk_out = endp->bEndpointAddress; + } + if (!(dev->bulk_in && dev->bulk_out)) { + retval = -ENODEV; + err("Unable to find endpoints"); + goto err_endpoints; + } + + dev->ctrl_buf = kmalloc(IPHETH_CTRL_BUF_SIZE, GFP_KERNEL); + if (dev->ctrl_buf == NULL) { + retval = -ENOMEM; + goto err_alloc_ctrl_buf; + } + + retval = ipheth_get_macaddr(dev); + if (retval) + goto err_get_macaddr; + + INIT_DELAYED_WORK(&dev->carrier_work, ipheth_carrier_check_work); + + retval = ipheth_alloc_urbs(dev); + if (retval) { + err("error allocating urbs: %d", retval); + goto err_alloc_urbs; + } + + usb_set_intfdata(intf, dev); + + SET_NETDEV_DEV(netdev, &intf->dev); + SET_ETHTOOL_OPS(netdev, &ops); + SET_NETDEV_DEVTYPE(netdev, &ipheth_type); + + retval = register_netdev(netdev); + if (retval) { + err("error registering netdev: %d", retval); + retval = -EIO; + goto err_register_netdev; + } + + dev_info(&intf->dev, "Apple iPhone USB Ethernet device attached\n"); + return 0; + +err_register_netdev: + ipheth_free_urbs(dev); +err_alloc_urbs: +err_get_macaddr: +err_alloc_ctrl_buf: + kfree(dev->ctrl_buf); +err_endpoints: + free_netdev(netdev); + return retval; +} + +static void ipheth_disconnect(struct usb_interface *intf) +{ + struct ipheth_device *dev; + + dev = usb_get_intfdata(intf); + if (dev != NULL) { + unregister_netdev(dev->net); + ipheth_kill_urbs(dev); + ipheth_free_urbs(dev); + kfree(dev->ctrl_buf); + free_netdev(dev->net); + } + usb_set_intfdata(intf, NULL); + dev_info(&intf->dev, "Apple iPhone USB Ethernet now disconnected\n"); +} + +static struct usb_driver ipheth_driver = { + .name = "ipheth", + .probe = ipheth_probe, + .disconnect = ipheth_disconnect, + .id_table = ipheth_table, +}; + +static int __init ipheth_init(void) +{ + int retval; + + retval = usb_register(&ipheth_driver); + if (retval) { + err("usb_register failed: %d", retval); + return retval; + } + return 0; +} + +static void __exit ipheth_exit(void) +{ + usb_deregister(&ipheth_driver); +} + +module_init(ipheth_init); +module_exit(ipheth_exit); + +MODULE_AUTHOR("Diego Giagio "); +MODULE_DESCRIPTION("Apple iPhone USB Ethernet driver"); +MODULE_LICENSE("Dual BSD/GPL"); -- cgit v0.10.2 From f2228f785a9d97307aa8ba709088cfda6c3df73f Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Sun, 18 Apr 2010 16:58:22 +0000 Subject: ipv6: allow to send packet after receiving ICMPv6 Too Big message with MTU field less than IPV6_MIN_MTU According to RFC2460, PMTU is set to the IPv6 Minimum Link MTU (1280) and a fragment header should always be included after a node receiving Too Big message reporting PMTU is less than the IPv6 Minimum Link MTU. After receiving a ICMPv6 Too Big message reporting PMTU is less than the IPv6 Minimum Link MTU, sctp *can't* send any data/control chunk that total length including IPv6 head and IPv6 extend head is less than IPV6_MIN_MTU(1280 bytes). The failure occured in p6_fragment(), about reason see following(take SHUTDOWN chunk for example): sctp_packet_transmit (SHUTDOWN chunk, len=16 byte) |------sctp_v6_xmit (local_df=0) |------ip6_xmit |------ip6_output (dst_allfrag is ture) |------ip6_fragment In ip6_fragment(), for local_df=0, drops the the packet and returns EMSGSIZE. The patch fixes it with adding check length of skb->len. In this case, Ipv6 not to fragment upper protocol data, just only add a fragment header before it. Signed-off-by: Shan Wei Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 65f9c37..75d5ef8 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -629,7 +629,7 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *)) /* We must not fragment if the socket is set to force MTU discovery * or if the skb it not generated by a local socket. */ - if (!skb->local_df) { + if (!skb->local_df && skb->len > mtu) { skb->dev = skb_dst(skb)->dev; icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu); IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), -- cgit v0.10.2 From f4f914b58019f0e50d521bbbadfaee260d766f95 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 20 Apr 2010 21:21:26 +0000 Subject: net: ipv6 bind to device issue The issue raises when having 2 NICs both assigned the same IPv6 global address. If a sender binds to a particular NIC (SO_BINDTODEVICE), the outgoing traffic is being sent via the first found. The bonded device is thus not taken into an account during the routing. From the ip6_route_output function: If the binding address is multicast, linklocal or loopback, the RT6_LOOKUP_F_IFACE bit is set, but not for global address. So binding global address will neglect SO_BINDTODEVICE-binded device, because the fib6_rule_lookup function path won't check for the flowi::oif field and take first route that fits. Signed-off-by: Jiri Olsa Signed-off-by: Scott Otto Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index c2438e8..05ebd78 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -815,7 +815,7 @@ struct dst_entry * ip6_route_output(struct net *net, struct sock *sk, { int flags = 0; - if (rt6_need_strict(&fl->fl6_dst)) + if (fl->oif || rt6_need_strict(&fl->fl6_dst)) flags |= RT6_LOOKUP_F_IFACE; if (!ipv6_addr_any(&fl->fl6_src)) -- cgit v0.10.2 From aac78daf8f37256283f56820ae858add7139c56c Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Wed, 21 Apr 2010 20:41:52 -0400 Subject: ALSA: hda: Use STAC_DELL_M6_BOTH quirk for Dell Studio XPS 1645 BugLink: https://launchpad.net/bugs/553002 The OR has verified that the dell-m6 model quirk is necessary for audio to be audible by default on the Dell Studio XPS 1645. This change is necessary for 2.6.32.11 and 2.6.33.2 alike. Reported-by: Robert Chambers Tested-by: Robert Chambers Cc: Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index c4be3fa..81ecd93 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1607,6 +1607,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { "Dell Studio 1555", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02bd, "Dell Studio 1557", STAC_DELL_M6_DMIC), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02fe, + "Dell Studio XPS 1645", STAC_DELL_M6_BOTH), {} /* terminator */ }; -- cgit v0.10.2 From c3c532061e46156e8aab1268f38d66cfb63aeb2d Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 22 Apr 2010 11:37:01 +0200 Subject: bdi: add helper function for doing init and register of a bdi for a file system Pretty trivial helper, just sets up the bdi and registers it. An atomic sequence count is used to ensure that the registered sysfs names are unique. Signed-off-by: Jens Axboe diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index fcbc26a..e19c677 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -101,6 +101,7 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent, const char *fmt, ...); int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev); void bdi_unregister(struct backing_dev_info *bdi); +int bdi_setup_and_register(struct backing_dev_info *, char *, unsigned int); void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb, long nr_pages); int bdi_writeback_task(struct bdi_writeback *wb); diff --git a/mm/backing-dev.c b/mm/backing-dev.c index f13e067..dbda470 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -11,6 +11,8 @@ #include #include +static atomic_long_t bdi_seq = ATOMIC_LONG_INIT(0); + void default_unplug_io_fn(struct backing_dev_info *bdi, struct page *page) { } @@ -715,6 +717,33 @@ void bdi_destroy(struct backing_dev_info *bdi) } EXPORT_SYMBOL(bdi_destroy); +/* + * For use from filesystems to quickly init and register a bdi associated + * with dirty writeback + */ +int bdi_setup_and_register(struct backing_dev_info *bdi, char *name, + unsigned int cap) +{ + char tmp[32]; + int err; + + bdi->name = name; + bdi->capabilities = cap; + err = bdi_init(bdi); + if (err) + return err; + + sprintf(tmp, "%.28s%s", name, "-%d"); + err = bdi_register(bdi, NULL, tmp, atomic_long_inc_return(&bdi_seq)); + if (err) { + bdi_destroy(bdi); + return err; + } + + return 0; +} +EXPORT_SYMBOL(bdi_setup_and_register); + static wait_queue_head_t congestion_wqh[2] = { __WAIT_QUEUE_HEAD_INITIALIZER(congestion_wqh[0]), __WAIT_QUEUE_HEAD_INITIALIZER(congestion_wqh[1]) -- cgit v0.10.2 From 0ed07ddb56d1348e5ce33f3b8de20d730351983a Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 22 Apr 2010 11:42:00 +0200 Subject: 9p: add bdi backing to mount session This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c index 5c5bc84..f8b86e9 100644 --- a/fs/9p/v9fs.c +++ b/fs/9p/v9fs.c @@ -238,6 +238,13 @@ struct p9_fid *v9fs_session_init(struct v9fs_session_info *v9ses, return ERR_PTR(-ENOMEM); } + rc = bdi_setup_and_register(&v9ses->bdi, "9p", BDI_CAP_MAP_COPY); + if (rc) { + __putname(v9ses->aname); + __putname(v9ses->uname); + return ERR_PTR(rc); + } + spin_lock(&v9fs_sessionlist_lock); list_add(&v9ses->slist, &v9fs_sessionlist); spin_unlock(&v9fs_sessionlist_lock); @@ -301,6 +308,7 @@ struct p9_fid *v9fs_session_init(struct v9fs_session_info *v9ses, return fid; error: + bdi_destroy(&v9ses->bdi); return ERR_PTR(retval); } @@ -326,6 +334,8 @@ void v9fs_session_close(struct v9fs_session_info *v9ses) __putname(v9ses->uname); __putname(v9ses->aname); + bdi_destroy(&v9ses->bdi); + spin_lock(&v9fs_sessionlist_lock); list_del(&v9ses->slist); spin_unlock(&v9fs_sessionlist_lock); diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h index a0a8d3d..bec4d0b 100644 --- a/fs/9p/v9fs.h +++ b/fs/9p/v9fs.h @@ -20,6 +20,7 @@ * Boston, MA 02111-1301 USA * */ +#include /** * enum p9_session_flags - option flags for each 9P session @@ -102,6 +103,7 @@ struct v9fs_session_info { u32 uid; /* if ACCESS_SINGLE, the uid that has access */ struct p9_client *clnt; /* 9p client */ struct list_head slist; /* list of sessions registered with v9fs */ + struct backing_dev_info bdi; }; struct p9_fid *v9fs_session_init(struct v9fs_session_info *, const char *, diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c index 491108b..806da5d 100644 --- a/fs/9p/vfs_super.c +++ b/fs/9p/vfs_super.c @@ -77,6 +77,7 @@ v9fs_fill_super(struct super_block *sb, struct v9fs_session_info *v9ses, sb->s_blocksize = 1 << sb->s_blocksize_bits; sb->s_magic = V9FS_MAGIC; sb->s_op = &v9fs_super_ops; + sb->s_bdi = &v9ses->bdi; sb->s_flags = flags | MS_ACTIVE | MS_SYNCHRONOUS | MS_DIRSYNC | MS_NOATIME; -- cgit v0.10.2 From e1da0222753a2322d76c97fc02396fb83143c7ac Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 22 Apr 2010 11:58:18 +0200 Subject: afs: add bdi backing to mount session. This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe diff --git a/fs/afs/internal.h b/fs/afs/internal.h index c54dad4..a10f258 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -19,6 +19,7 @@ #include #include #include +#include #include "afs.h" #include "afs_vl.h" @@ -313,6 +314,7 @@ struct afs_volume { unsigned short rjservers; /* number of servers discarded due to -ENOMEDIUM */ struct afs_server *servers[8]; /* servers on which volume resides (ordered) */ struct rw_semaphore server_sem; /* lock for accessing current server */ + struct backing_dev_info bdi; }; /* diff --git a/fs/afs/super.c b/fs/afs/super.c index 14f6431..e932e5a 100644 --- a/fs/afs/super.c +++ b/fs/afs/super.c @@ -311,6 +311,7 @@ static int afs_fill_super(struct super_block *sb, void *data) sb->s_magic = AFS_FS_MAGIC; sb->s_op = &afs_super_ops; sb->s_fs_info = as; + sb->s_bdi = &as->volume->bdi; /* allocate the root inode and dentry */ fid.vid = as->volume->vid; diff --git a/fs/afs/volume.c b/fs/afs/volume.c index a353e69..401eeb2 100644 --- a/fs/afs/volume.c +++ b/fs/afs/volume.c @@ -106,6 +106,10 @@ struct afs_volume *afs_volume_lookup(struct afs_mount_params *params) volume->cell = params->cell; volume->vid = vlocation->vldb.vid[params->type]; + ret = bdi_setup_and_register(&volume->bdi, "afs", BDI_CAP_MAP_COPY); + if (ret) + goto error_bdi; + init_rwsem(&volume->server_sem); /* look up all the applicable server records */ @@ -151,6 +155,8 @@ error: return ERR_PTR(ret); error_discard: + bdi_destroy(&volume->bdi); +error_bdi: up_write(¶ms->cell->vl_sem); for (loop = volume->nservers - 1; loop >= 0; loop--) @@ -200,6 +206,7 @@ void afs_put_volume(struct afs_volume *volume) for (loop = volume->nservers - 1; loop >= 0; loop--) afs_put_server(volume->servers[loop]); + bdi_destroy(&volume->bdi); kfree(volume); _leave(" [destroyed]"); -- cgit v0.10.2 From 8044f7f468469c80031611206d554f86fcdfe704 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 22 Apr 2010 12:09:48 +0200 Subject: cifs: add bdi backing to mount session This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h index 4797787..246a167 100644 --- a/fs/cifs/cifs_fs_sb.h +++ b/fs/cifs/cifs_fs_sb.h @@ -18,6 +18,8 @@ #ifndef _CIFS_FS_SB_H #define _CIFS_FS_SB_H +#include + #define CIFS_MOUNT_NO_PERM 1 /* do not do client vfs_perm check */ #define CIFS_MOUNT_SET_UID 2 /* set current's euid in create etc. */ #define CIFS_MOUNT_SERVER_INUM 4 /* inode numbers from uniqueid from server */ @@ -50,5 +52,6 @@ struct cifs_sb_info { #ifdef CONFIG_CIFS_DFS_UPCALL char *mountdata; /* mount options received at mount time */ #endif + struct backing_dev_info bdi; }; #endif /* _CIFS_FS_SB_H */ diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index ded66be..ad235d6 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -103,6 +103,12 @@ cifs_read_super(struct super_block *sb, void *data, if (cifs_sb == NULL) return -ENOMEM; + rc = bdi_setup_and_register(&cifs_sb->bdi, "cifs", BDI_CAP_MAP_COPY); + if (rc) { + kfree(cifs_sb); + return rc; + } + #ifdef CONFIG_CIFS_DFS_UPCALL /* copy mount params to sb for use in submounts */ /* BB: should we move this after the mount so we @@ -115,6 +121,7 @@ cifs_read_super(struct super_block *sb, void *data, int len = strlen(data); cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL); if (cifs_sb->mountdata == NULL) { + bdi_destroy(&cifs_sb->bdi); kfree(sb->s_fs_info); sb->s_fs_info = NULL; return -ENOMEM; @@ -135,6 +142,7 @@ cifs_read_super(struct super_block *sb, void *data, sb->s_magic = CIFS_MAGIC_NUMBER; sb->s_op = &cifs_super_ops; + sb->s_bdi = &cifs_sb->bdi; /* if (cifs_sb->tcon->ses->server->maxBuf > MAX_CIFS_HDR_SIZE + 512) sb->s_blocksize = cifs_sb->tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE; */ @@ -183,6 +191,7 @@ out_mount_failed: } #endif unload_nls(cifs_sb->local_nls); + bdi_destroy(&cifs_sb->bdi); kfree(cifs_sb); } return rc; @@ -214,6 +223,7 @@ cifs_put_super(struct super_block *sb) #endif unload_nls(cifs_sb->local_nls); + bdi_destroy(&cifs_sb->bdi); kfree(cifs_sb); unlock_kernel(); -- cgit v0.10.2 From 5163d90076729413cb882d3dd5c3d3cfb5b9f035 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 22 Apr 2010 12:12:40 +0200 Subject: coda: add bdi backing to mount session This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe diff --git a/fs/coda/inode.c b/fs/coda/inode.c index a1695dc..d97f993 100644 --- a/fs/coda/inode.c +++ b/fs/coda/inode.c @@ -167,6 +167,10 @@ static int coda_fill_super(struct super_block *sb, void *data, int silent) return -EBUSY; } + error = bdi_setup_and_register(&vc->bdi, "coda", BDI_CAP_MAP_COPY); + if (error) + goto bdi_err; + vc->vc_sb = sb; sb->s_fs_info = vc; @@ -175,6 +179,7 @@ static int coda_fill_super(struct super_block *sb, void *data, int silent) sb->s_blocksize_bits = 12; sb->s_magic = CODA_SUPER_MAGIC; sb->s_op = &coda_super_operations; + sb->s_bdi = &vc->bdi; /* get root fid from Venus: this needs the root inode */ error = venus_rootfid(sb, &fid); @@ -200,6 +205,8 @@ static int coda_fill_super(struct super_block *sb, void *data, int silent) return 0; error: + bdi_destroy(&vc->bdi); + bdi_err: if (root) iput(root); if (vc) @@ -210,6 +217,7 @@ static int coda_fill_super(struct super_block *sb, void *data, int silent) static void coda_put_super(struct super_block *sb) { + bdi_destroy(&coda_vcp(sb)->bdi); coda_vcp(sb)->vc_sb = NULL; sb->s_fs_info = NULL; diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h index 5b5d473..644062e8 100644 --- a/include/linux/coda_psdev.h +++ b/include/linux/coda_psdev.h @@ -1,6 +1,7 @@ #ifndef __CODA_PSDEV_H #define __CODA_PSDEV_H +#include #include #define CODA_PSDEV_MAJOR 67 @@ -17,6 +18,7 @@ struct venus_comm { struct list_head vc_processing; int vc_inuse; struct super_block *vc_sb; + struct backing_dev_info bdi; }; -- cgit v0.10.2 From 9df9c8b930156a2f9ce2b2ae66acb14bee2663f5 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 22 Apr 2010 12:22:04 +0200 Subject: ecryptfs: add bdi backing to mount session This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index bc71154..bfc2e0f 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -35,6 +35,7 @@ #include #include #include +#include /* Version verification for shared data structures w/ userspace */ #define ECRYPTFS_VERSION_MAJOR 0x00 @@ -393,6 +394,7 @@ struct ecryptfs_mount_crypt_stat { struct ecryptfs_sb_info { struct super_block *wsi_sb; struct ecryptfs_mount_crypt_stat mount_crypt_stat; + struct backing_dev_info bdi; }; /* file private data. */ diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index af1a8f0..760983d 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -497,17 +497,25 @@ struct kmem_cache *ecryptfs_sb_info_cache; static int ecryptfs_fill_super(struct super_block *sb, void *raw_data, int silent) { + struct ecryptfs_sb_info *esi; int rc = 0; /* Released in ecryptfs_put_super() */ ecryptfs_set_superblock_private(sb, kmem_cache_zalloc(ecryptfs_sb_info_cache, GFP_KERNEL)); - if (!ecryptfs_superblock_to_private(sb)) { + esi = ecryptfs_superblock_to_private(sb); + if (!esi) { ecryptfs_printk(KERN_WARNING, "Out of memory\n"); rc = -ENOMEM; goto out; } + + rc = bdi_setup_and_register(&esi->bdi, "ecryptfs", BDI_CAP_MAP_COPY); + if (rc) + goto out; + + sb->s_bdi = &esi->bdi; sb->s_op = &ecryptfs_sops; /* Released through deactivate_super(sb) from get_sb_nodev */ sb->s_root = d_alloc(NULL, &(const struct qstr) { diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c index 278743c..0c0ae49 100644 --- a/fs/ecryptfs/super.c +++ b/fs/ecryptfs/super.c @@ -122,6 +122,7 @@ static void ecryptfs_put_super(struct super_block *sb) lock_kernel(); ecryptfs_destroy_mount_crypt_stat(&sb_info->mount_crypt_stat); + bdi_destroy(&sb_info->bdi); kmem_cache_free(ecryptfs_sb_info_cache, sb_info); ecryptfs_set_superblock_private(sb, NULL); -- cgit v0.10.2 From b3d0ab7e60d1865bb6f6a79a77aaba22f2543236 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 22 Apr 2010 12:26:04 +0200 Subject: exofs: add bdi backing to mount session This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe diff --git a/fs/exofs/exofs.h b/fs/exofs/exofs.h index 8442e35..5437327 100644 --- a/fs/exofs/exofs.h +++ b/fs/exofs/exofs.h @@ -35,6 +35,7 @@ #include #include +#include #include "common.h" /* FIXME: Remove once pnfs hits mainline @@ -92,6 +93,7 @@ struct exofs_sb_info { struct exofs_layout layout; /* Default files layout, * contains the variable osd_dev * array. Keep last */ + struct backing_dev_info bdi; struct osd_dev *_min_one_dev[1]; /* Place holder for one dev */ }; diff --git a/fs/exofs/super.c b/fs/exofs/super.c index 18e57ea..03149b9 100644 --- a/fs/exofs/super.c +++ b/fs/exofs/super.c @@ -302,6 +302,7 @@ static void exofs_put_super(struct super_block *sb) _exofs_print_device("Unmounting", NULL, sbi->layout.s_ods[0], sbi->layout.s_pid); + bdi_destroy(&sbi->bdi); exofs_free_sbi(sbi); sb->s_fs_info = NULL; } @@ -546,6 +547,10 @@ static int exofs_fill_super(struct super_block *sb, void *data, int silent) if (!sbi) return -ENOMEM; + ret = bdi_setup_and_register(&sbi->bdi, "exofs", BDI_CAP_MAP_COPY); + if (ret) + goto free_bdi; + /* use mount options to fill superblock */ od = osduld_path_lookup(opts->dev_name); if (IS_ERR(od)) { @@ -612,6 +617,7 @@ static int exofs_fill_super(struct super_block *sb, void *data, int silent) } /* set up operation vectors */ + sb->s_bdi = &sbi->bdi; sb->s_fs_info = sbi; sb->s_op = &exofs_sops; sb->s_export_op = &exofs_export_ops; @@ -643,6 +649,8 @@ static int exofs_fill_super(struct super_block *sb, void *data, int silent) return 0; free_sbi: + bdi_destroy(&sbi->bdi); +free_bdi: EXOFS_ERR("Unable to mount exofs on %s pid=0x%llx err=%d\n", opts->dev_name, sbi->layout.s_pid, ret); exofs_free_sbi(sbi); -- cgit v0.10.2 From f1970c73cbb6b884152207e4dfe90639f5029905 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 22 Apr 2010 12:31:11 +0200 Subject: ncpfs: add bdi backing to mount session This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c index cf98da1..fa33851 100644 --- a/fs/ncpfs/inode.c +++ b/fs/ncpfs/inode.c @@ -526,10 +526,15 @@ static int ncp_fill_super(struct super_block *sb, void *raw_data, int silent) sb->s_blocksize_bits = 10; sb->s_magic = NCP_SUPER_MAGIC; sb->s_op = &ncp_sops; + sb->s_bdi = &server->bdi; server = NCP_SBP(sb); memset(server, 0, sizeof(*server)); + error = bdi_setup_and_register(&server->bdi, "ncpfs", BDI_CAP_MAP_COPY); + if (error) + goto out_bdi; + server->ncp_filp = ncp_filp; server->ncp_sock = sock; @@ -719,6 +724,8 @@ out_fput2: if (server->info_filp) fput(server->info_filp); out_fput: + bdi_destroy(&server->bdi); +out_bdi: /* 23/12/1998 Marcin Dalecki : * * The previously used put_filp(ncp_filp); was bogous, since @@ -756,6 +763,7 @@ static void ncp_put_super(struct super_block *sb) kill_pid(server->m.wdog_pid, SIGTERM, 1); put_pid(server->m.wdog_pid); + bdi_destroy(&server->bdi); kfree(server->priv.data); kfree(server->auth.object_name); vfree(server->rxbuf); diff --git a/include/linux/ncp_fs_sb.h b/include/linux/ncp_fs_sb.h index 6330fc7..5ec9ca6 100644 --- a/include/linux/ncp_fs_sb.h +++ b/include/linux/ncp_fs_sb.h @@ -12,6 +12,7 @@ #include #include #include +#include #ifdef __KERNEL__ @@ -127,6 +128,7 @@ struct ncp_server { size_t len; __u8 data[128]; } unexpected_packet; + struct backing_dev_info bdi; }; extern void ncp_tcp_rcv_proc(struct work_struct *work); -- cgit v0.10.2 From 424264b7b220e8eee165dc3080ae48692af73dec Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 22 Apr 2010 12:37:07 +0200 Subject: smbfs: add bdi backing to mount session This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c index 1c4c8f0..dfa1d67 100644 --- a/fs/smbfs/inode.c +++ b/fs/smbfs/inode.c @@ -479,6 +479,7 @@ smb_put_super(struct super_block *sb) if (server->conn_pid) kill_pid(server->conn_pid, SIGTERM, 1); + bdi_destroy(&server->bdi); kfree(server->ops); smb_unload_nls(server); sb->s_fs_info = NULL; @@ -525,6 +526,11 @@ static int smb_fill_super(struct super_block *sb, void *raw_data, int silent) if (!server) goto out_no_server; sb->s_fs_info = server; + + if (bdi_setup_and_register(&server->bdi, "smbfs", BDI_CAP_MAP_COPY)) + goto out_bdi; + + sb->s_bdi = &server->bdi; server->super_block = sb; server->mnt = NULL; @@ -624,6 +630,8 @@ out_no_smbiod: out_bad_option: kfree(mem); out_no_mem: + bdi_destroy(&server->bdi); +out_bdi: if (!server->mnt) printk(KERN_ERR "smb_fill_super: allocation failure\n"); sb->s_fs_info = NULL; diff --git a/include/linux/smb_fs_sb.h b/include/linux/smb_fs_sb.h index 8a060a7..bb947dd 100644 --- a/include/linux/smb_fs_sb.h +++ b/include/linux/smb_fs_sb.h @@ -10,6 +10,7 @@ #define _SMB_FS_SB #include +#include #include /* @@ -74,6 +75,8 @@ struct smb_sb_info { struct smb_ops *ops; struct super_block *super_block; + + struct backing_dev_info bdi; }; static inline int -- cgit v0.10.2 From 313af42b5b3ea105567e8a62b01f35a9245c3fb3 Mon Sep 17 00:00:00 2001 From: Leo Chen Date: Thu, 1 Apr 2010 19:10:47 +0100 Subject: ARM: 6023/1: update bcmring_defconfig to latest version and fix build error update bcmring_defconfig to the latest kernel version, this will fix the KAutobuild error. Signed-off-by: Leo Hao Chen Signed-off-by: Russell King diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig index 1e12167..6ac6693 100644 --- a/arch/arm/configs/bcmring_defconfig +++ b/arch/arm/configs/bcmring_defconfig @@ -1,13 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc3 -# Fri Jul 17 12:07:28 2009 +# Linux kernel version: 2.6.34-rc2 +# Mon Mar 29 12:01:41 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -32,6 +33,12 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -43,21 +50,22 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y @@ -75,19 +83,21 @@ CONFIG_FUTEX=y # CONFIG_EVENTFD is not set CONFIG_SHMEM=y # CONFIG_AIO is not set +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # -# Performance Counters +# Kernel Performance Events And Counters # +CONFIG_PERF_EVENTS=y +CONFIG_PERF_COUNTERS=y # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_SLUB_DEBUG is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -115,24 +125,53 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +CONFIG_ARCH_BCMRING=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -149,6 +188,7 @@ CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set @@ -157,19 +197,26 @@ CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -CONFIG_ARCH_BCMRING=y # CONFIG_ARCH_FPGA11107 is not set CONFIG_ARCH_BCM11107=y @@ -185,7 +232,7 @@ CONFIG_CPU_V6=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_V6=y CONFIG_CPU_CACHE_V6=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -201,6 +248,8 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_COMMON_CLKDEV=y @@ -222,6 +271,8 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y @@ -229,6 +280,7 @@ CONFIG_AEABI=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set +CONFIG_HW_PERF_EVENTS=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -240,8 +292,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y CONFIG_UACCESS_WITH_MEMCPY=y @@ -335,9 +386,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -433,6 +484,10 @@ CONFIG_MTD_NAND_BCM_UMI_HWCS=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set @@ -444,6 +499,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -452,6 +508,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_NETDEVICES is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -459,6 +516,7 @@ CONFIG_HAVE_IDE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -508,6 +566,7 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -519,13 +578,17 @@ CONFIG_LEGACY_PTY_COUNT=64 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -541,6 +604,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -566,14 +630,17 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -589,9 +656,12 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_FILE_LOCKING is not set # CONFIG_FSNOTIFY is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +# CONFIG_INOTIFY_USER is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -647,6 +717,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -657,7 +728,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -675,11 +745,12 @@ CONFIG_MSDOS_PARTITION=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set CONFIG_HEADERS_CHECK=y # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_FRAME_POINTER=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -693,6 +764,7 @@ CONFIG_TRACING_SUPPORT=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_ARM_UNWIND is not set # CONFIG_DEBUG_USER is not set +# CONFIG_OC_ETM is not set # # Security options @@ -700,7 +772,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set -- cgit v0.10.2 From 9a99d55514d3c6bfc03e41536659d781af6998f5 Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Wed, 21 Apr 2010 09:41:54 +0100 Subject: ARM: 6059/1: PL061 GPIO: Changing *_irq_chip_data with *_irq_data for real irqs. PL061 driver is using set_irq_chip_data and get_irq_chip_data for real irq lines. It must be using *_irq_data functions instead. As chip_data is used by interrupt controllers also, which makes vic write at incorrect addresses. Signed-off-by: Viresh Kumar Acked-by: Baruch Siach Signed-off-by: Russell King diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c index 5ad8f77..cc3b5e0 100644 --- a/drivers/gpio/pl061.c +++ b/drivers/gpio/pl061.c @@ -204,7 +204,7 @@ static struct irq_chip pl061_irqchip = { static void pl061_irq_handler(unsigned irq, struct irq_desc *desc) { - struct list_head *chip_list = get_irq_chip_data(irq); + struct list_head *chip_list = get_irq_data(irq); struct list_head *ptr; struct pl061_gpio *chip; @@ -297,9 +297,9 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id) goto iounmap; } INIT_LIST_HEAD(chip_list); - set_irq_chip_data(irq, chip_list); + set_irq_data(irq, chip_list); } else - chip_list = get_irq_chip_data(irq); + chip_list = get_irq_data(irq); list_add(&chip->list, chip_list); for (i = 0; i < PL061_GPIO_NR; i++) { -- cgit v0.10.2 From 64b997c5142a13373857de09599afd2f079c2f7a Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Wed, 21 Apr 2010 09:42:05 +0100 Subject: ARM: 6060/1: PL061 GPIO: Setting gpio val after changing direction to OUT. pl061_direction_output doesn't set value of gpio to value passed to it. This patch sets value of GPIO pin to requested value after changing direction to OUT. Signed-off-by: Viresh Kumar Acked-by: Baruch Siach Signed-off-by: Russell King diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c index cc3b5e0..2196f31 100644 --- a/drivers/gpio/pl061.c +++ b/drivers/gpio/pl061.c @@ -91,6 +91,12 @@ static int pl061_direction_output(struct gpio_chip *gc, unsigned offset, gpiodir = readb(chip->base + GPIODIR); gpiodir |= 1 << offset; writeb(gpiodir, chip->base + GPIODIR); + + /* + * gpio value is set again, because pl061 doesn't allow to set value of + * a gpio pin before configuring it in OUT mode. + */ + writeb(!!value << offset, chip->base + (1 << (offset + 2))); spin_unlock_irqrestore(&chip->lock, flags); return 0; -- cgit v0.10.2 From 6de9400250f95f82da432c28b9b43823f4154c58 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rn=20Engel?= Date: Thu, 22 Apr 2010 14:11:43 +0200 Subject: Fix JFFS2 sync silent failure MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit JFFS2 does not appear to set s_bdi anywhere. And as of 32a88aa1, __sync_filesystem() will return 0 if s_bdi is not set. As a result, sync_fs() is never called for jffs2 and whatever remains in the wbuf will not make it to the device. Fix that up by assigning the mtd bdi. Signed-off-by: Jörn Engel Acked-By: David Woodhouse Signed-off-by: Jens Axboe diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c index af8b42e..7c00319 100644 --- a/drivers/mtd/mtdsuper.c +++ b/drivers/mtd/mtdsuper.c @@ -13,6 +13,7 @@ #include #include #include +#include /* * compare superblocks to see if they're equivalent @@ -44,6 +45,7 @@ static int get_sb_mtd_set(struct super_block *sb, void *_mtd) sb->s_mtd = mtd; sb->s_dev = MKDEV(MTD_BLOCK_MAJOR, mtd->index); + sb->s_bdi = mtd->backing_dev_info; return 0; } -- cgit v0.10.2 From 7ac314c82f552eefebaa91c9fffe8c0d435641b9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 22 Apr 2010 14:27:23 +0200 Subject: drbd: fix memory leak We leak memory if "--dry-run" is not supported by the peer. Signed-off-by: Dan Carpenter Signed-off-by: Jens Axboe diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 67e0fc5..93d1f9b 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -1695,6 +1695,7 @@ int drbd_send_protocol(struct drbd_conf *mdev) cf |= CF_DRY_RUN; else { dev_err(DEV, "--dry-run is not supported by peer"); + kfree(p); return 0; } } -- cgit v0.10.2 From 7e2455c1a123ceadbb35150a610d61e8443fd340 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Thu, 22 Apr 2010 14:50:23 +0200 Subject: drbd: Terminate a connection early if sending the protocol fails Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg Signed-off-by: Jens Axboe diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index ed9f1de..3f096e7 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -899,7 +899,8 @@ retry: drbd_thread_start(&mdev->asender); - drbd_send_protocol(mdev); + if (!drbd_send_protocol(mdev)) + return -1; drbd_send_sync_param(mdev, &mdev->sync_conf); drbd_send_sizes(mdev, 0); drbd_send_uuids(mdev); -- cgit v0.10.2 From 3353541fe533350a22a03e2fb7dc085b35912575 Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Thu, 22 Apr 2010 07:15:26 -0400 Subject: ALSA: hda: Use ALC880_F1734 quirk for Fujitsu Siemens AMILO Xi 1526 BugLink: https://launchpad.net/bugs/567494 The OR has verified that the existing model quirk, ALC880_UNIWILL, is insufficient for audible playback and capture by default. Instead, the ALC880_F1734 model quirk needs to be used. This change is necessary for both 2.6.32.11 and 2.6.33.2. Reported-by: Arnaud Malpeyre Tested-by: Arnaud Malpeyre Cc: Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index aad1627..7404dba 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4143,7 +4143,7 @@ static struct snd_pci_quirk alc880_cfg_tbl[] = { SND_PCI_QUIRK(0x1695, 0x4012, "EPox EP-5LDA", ALC880_5ST_DIG), SND_PCI_QUIRK(0x1734, 0x107c, "FSC F1734", ALC880_F1734), SND_PCI_QUIRK(0x1734, 0x1094, "FSC Amilo M1451G", ALC880_FUJITSU), - SND_PCI_QUIRK(0x1734, 0x10ac, "FSC", ALC880_UNIWILL), + SND_PCI_QUIRK(0x1734, 0x10ac, "FSC AMILO Xi 1526", ALC880_F1734), SND_PCI_QUIRK(0x1734, 0x10b0, "Fujitsu", ALC880_FUJITSU), SND_PCI_QUIRK(0x1854, 0x0018, "LG LW20", ALC880_LG_LW), SND_PCI_QUIRK(0x1854, 0x003b, "LG", ALC880_LG), -- cgit v0.10.2 From 7efbfd1ae98ef9efe06352e2a1ad83e8c14ceeb1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 21 Apr 2010 11:04:06 -0400 Subject: ALSA: snd-meastro3: Add amp_gpio quirk for Compaq EVO N600C Without this quirk sound stops working after suspend resume. With this quirk, one still needs to manually unmute the master volume control after a suspend / / resume cycle. That is fixed in another patch in this set. Note that this patch was submitted to the alsa bug tracker a long time ago: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4319 Signed-off-by: Hans de Goede CC: Signed-off-by: Takashi Iwai diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c index b64e781..728de23 100644 --- a/sound/pci/maestro3.c +++ b/sound/pci/maestro3.c @@ -884,6 +884,7 @@ static DEFINE_PCI_DEVICE_TABLE(snd_m3_ids) = { MODULE_DEVICE_TABLE(pci, snd_m3_ids); static struct snd_pci_quirk m3_amp_quirk_list[] __devinitdata = { + SND_PCI_QUIRK(0x0E11, 0x0094, "Compaq Evo N600c", 0x0c), SND_PCI_QUIRK(0x10f7, 0x833e, "Panasonic CF-28", 0x0d), SND_PCI_QUIRK(0x10f7, 0x833d, "Panasonic CF-72", 0x0d), SND_PCI_QUIRK(0x1033, 0x80f1, "NEC LM800J/7", 0x03), -- cgit v0.10.2 From 715aa675338ce6e1a3b4f77cf87ea611f93058a8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 21 Apr 2010 11:04:08 -0400 Subject: ALSA: snd-meastro3: Ignore spurious HV interrupts during suspend / resume Ignore spurious HV interrupts during suspend / resume, this avoids mistaking them for a mute button press. This is not very pretty but it seems the only way to fix the master volume control gets muted after suspend issue I'm seeing. Note that the es1968 driver is doing exactly the same. Signed-off-by: Hans de Goede Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c index 728de23..b56e336 100644 --- a/sound/pci/maestro3.c +++ b/sound/pci/maestro3.c @@ -849,6 +849,7 @@ struct snd_m3 { struct snd_kcontrol *master_switch; struct snd_kcontrol *master_volume; struct tasklet_struct hwvol_tq; + unsigned int in_suspend; #ifdef CONFIG_PM u16 *suspend_mem; @@ -1614,6 +1615,11 @@ static void snd_m3_update_hw_volume(unsigned long private_data) outb(0x88, chip->iobase + SHADOW_MIX_REG_MASTER); outb(0x88, chip->iobase + HW_VOL_COUNTER_MASTER); + /* Ignore spurious HV interrupts during suspend / resume, this avoids + mistaking them for a mute button press. */ + if (chip->in_suspend) + return; + if (!chip->master_switch || !chip->master_volume) return; @@ -2425,6 +2431,7 @@ static int m3_suspend(struct pci_dev *pci, pm_message_t state) if (chip->suspend_mem == NULL) return 0; + chip->in_suspend = 1; snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); snd_pcm_suspend_all(chip->pcm); snd_ac97_suspend(chip->ac97); @@ -2498,6 +2505,7 @@ static int m3_resume(struct pci_dev *pci) snd_m3_hv_init(chip); snd_power_change_state(card, SNDRV_CTL_POWER_D0); + chip->in_suspend = 0; return 0; } #endif /* CONFIG_PM */ -- cgit v0.10.2 From 3d7b08945e54a3a5358d5890240619a013cb7388 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 22 Apr 2010 15:35:55 -0400 Subject: SUNRPC: Fix a bug in rpcauth_prune_expired Don't want to evict a credential if cred->cr_expire == jiffies, since that means that it was just placed on the cred_unused list. We therefore need to use time_in_range() rather than time_in_range_open(). Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c index f394fc1..95afe79 100644 --- a/net/sunrpc/auth.c +++ b/net/sunrpc/auth.c @@ -237,7 +237,7 @@ rpcauth_prune_expired(struct list_head *free, int nr_to_scan) list_for_each_entry_safe(cred, next, &cred_unused, cr_lru) { /* Enforce a 60 second garbage collection moratorium */ - if (time_in_range_open(cred->cr_expire, expired, jiffies) && + if (time_in_range(cred->cr_expire, expired, jiffies) && test_bit(RPCAUTH_CRED_HASHED, &cred->cr_flags) != 0) continue; -- cgit v0.10.2 From 1f063d2cdf332a8a5722006b1345d15d16007c6e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 22 Apr 2010 15:35:55 -0400 Subject: NFSv4: Don't attempt an atomic open if the file is a mountpoint Fix https://bugzilla.kernel.org/show_bug.cgi?id=15789 Signed-off-by: Trond Myklebust diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index be46f26..fbb4cf7 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1050,7 +1050,7 @@ static int nfs_open_revalidate(struct dentry *dentry, struct nameidata *nd) struct inode *dir; int openflags, ret = 0; - if (!is_atomic_open(nd)) + if (!is_atomic_open(nd) || d_mountpoint(dentry)) goto no_open; parent = dget_parent(dentry); dir = parent->d_inode; -- cgit v0.10.2 From 356e76b855bdbfd8d1c5e75bcf0c6bf0dfe83496 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 22 Apr 2010 15:35:56 -0400 Subject: NFS: rsize and wsize settings ignored on v4 mounts NFSv4 mounts ignore the rsize and wsize mount options, and always use the default transfer size for both. This seems to be because all NFSv4 mounts are now cloned, and the cloning logic doesn't copy the rsize and wsize settings from the parent nfs_server. I tested Fedora's 2.6.32.11-99 and it seems to have this problem as well, so I'm guessing that .33, .32, and perhaps older kernels have this issue as well. Signed-off-by: Chuck Lever Cc: Stable Signed-off-by: Trond Myklebust diff --git a/fs/nfs/client.c b/fs/nfs/client.c index a8766c4..acc9c49 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -966,6 +966,8 @@ out_error: static void nfs_server_copy_userdata(struct nfs_server *target, struct nfs_server *source) { target->flags = source->flags; + target->rsize = source->rsize; + target->wsize = source->wsize; target->acregmin = source->acregmin; target->acregmax = source->acregmax; target->acdirmin = source->acdirmin; -- cgit v0.10.2 From cdd29ecfcb9554132cd94b82ae8b69ba37adb3b5 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 22 Apr 2010 15:35:56 -0400 Subject: nfs: testing for null instead of ERR_PTR() nfs_path() returns an ERR_PTR(), it doesn't return null. Signed-off-by: Dan Carpenter Signed-off-by: Trond Myklebust diff --git a/fs/nfs/super.c b/fs/nfs/super.c index e016372..f9327bb 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2657,7 +2657,7 @@ static void nfs_fix_devname(const struct path *path, struct vfsmount *mnt) devname = nfs_path(path->mnt->mnt_devname, path->mnt->mnt_root, path->dentry, page, PAGE_SIZE); - if (devname == NULL) + if (IS_ERR(devname)) goto out_freepage; tmp = kstrdup(devname, GFP_KERNEL); if (tmp == NULL) -- cgit v0.10.2 From 71d0a6112a363e703e383ae5b12c492485c39701 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 22 Apr 2010 15:35:57 -0400 Subject: NFS: Fix an unstable write data integrity race Commit 2c61be0a9478258f77b66208a0c4b1f5f8161c3c (NFS: Ensure that the WRITE and COMMIT RPC calls are always uninterruptible) exposed a race on file close. In order to ensure correct close-to-open behaviour, we want to wait for all outstanding background commit operations to complete. This patch adds an inode flag that indicates if a commit operation is under way, and provides a mechanism to allow ->write_inode() to wait for its completion if this is a data integrity flush. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/write.c b/fs/nfs/write.c index de38d63..ccde2ae 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1201,6 +1201,25 @@ int nfs_writeback_done(struct rpc_task *task, struct nfs_write_data *data) #if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4) +static int nfs_commit_set_lock(struct nfs_inode *nfsi, int may_wait) +{ + if (!test_and_set_bit(NFS_INO_COMMIT, &nfsi->flags)) + return 1; + if (may_wait && !out_of_line_wait_on_bit_lock(&nfsi->flags, + NFS_INO_COMMIT, nfs_wait_bit_killable, + TASK_KILLABLE)) + return 1; + return 0; +} + +static void nfs_commit_clear_lock(struct nfs_inode *nfsi) +{ + clear_bit(NFS_INO_COMMIT, &nfsi->flags); + smp_mb__after_clear_bit(); + wake_up_bit(&nfsi->flags, NFS_INO_COMMIT); +} + + static void nfs_commitdata_release(void *data) { struct nfs_write_data *wdata = data; @@ -1262,8 +1281,6 @@ static int nfs_commit_rpcsetup(struct list_head *head, task = rpc_run_task(&task_setup_data); if (IS_ERR(task)) return PTR_ERR(task); - if (how & FLUSH_SYNC) - rpc_wait_for_completion_task(task); rpc_put_task(task); return 0; } @@ -1294,6 +1311,7 @@ nfs_commit_list(struct inode *inode, struct list_head *head, int how) BDI_RECLAIMABLE); nfs_clear_page_tag_locked(req); } + nfs_commit_clear_lock(NFS_I(inode)); return -ENOMEM; } @@ -1349,6 +1367,7 @@ static void nfs_commit_release(void *calldata) next: nfs_clear_page_tag_locked(req); } + nfs_commit_clear_lock(NFS_I(data->inode)); nfs_commitdata_release(calldata); } @@ -1363,8 +1382,11 @@ static const struct rpc_call_ops nfs_commit_ops = { static int nfs_commit_inode(struct inode *inode, int how) { LIST_HEAD(head); - int res; + int may_wait = how & FLUSH_SYNC; + int res = 0; + if (!nfs_commit_set_lock(NFS_I(inode), may_wait)) + goto out; spin_lock(&inode->i_lock); res = nfs_scan_commit(inode, &head, 0, 0); spin_unlock(&inode->i_lock); @@ -1372,7 +1394,13 @@ static int nfs_commit_inode(struct inode *inode, int how) int error = nfs_commit_list(inode, &head, how); if (error < 0) return error; - } + if (may_wait) + wait_on_bit(&NFS_I(inode)->flags, NFS_INO_COMMIT, + nfs_wait_bit_killable, + TASK_KILLABLE); + } else + nfs_commit_clear_lock(NFS_I(inode)); +out: return res; } diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 1a0b85a..07ce460 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -209,6 +209,7 @@ struct nfs_inode { #define NFS_INO_FLUSHING (4) /* inode is flushing out data */ #define NFS_INO_FSCACHE (5) /* inode can be cached by FS-Cache */ #define NFS_INO_FSCACHE_LOCK (6) /* FS-Cache cookie management lock */ +#define NFS_INO_COMMIT (7) /* inode is committing unstable writes */ static inline struct nfs_inode *NFS_I(const struct inode *inode) { -- cgit v0.10.2 From 80032cffb95edff4fc216b1cb21682257be326b7 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 21 Apr 2010 23:53:27 +0000 Subject: rtnetlink: potential ERR_PTR dereference In the original code, if rtnl_create_link() returned an ERR_PTR then that would get passed to rtnl_configure_link() which dereferences it. Signed-off-by: Dan Carpenter Acked-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 4568120..fe776c9 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -1270,10 +1270,11 @@ replay: err = ops->newlink(net, dev, tb, data); else err = register_netdevice(dev); - if (err < 0 && !IS_ERR(dev)) { + + if (err < 0 && !IS_ERR(dev)) free_netdev(dev); + if (err < 0) goto out; - } err = rtnl_configure_link(dev, ifm); if (err < 0) -- cgit v0.10.2 From 24acc6895616b373475e92e49925efc3ef591563 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 21 Apr 2010 23:55:27 +0000 Subject: rdma: potential ERR_PTR dereference In the original code, the "goto out" calls "rdma_destroy_id(cm_id);" That isn't needed here and would cause problems because "cm_id" is an ERR_PTR. The new code just returns directly. Signed-off-by: Dan Carpenter Acked-by: Andy Grover Signed-off-by: David S. Miller diff --git a/net/rds/rdma_transport.c b/net/rds/rdma_transport.c index 9ece910..7b15508 100644 --- a/net/rds/rdma_transport.c +++ b/net/rds/rdma_transport.c @@ -134,7 +134,7 @@ static int __init rds_rdma_listen_init(void) ret = PTR_ERR(cm_id); printk(KERN_ERR "RDS/RDMA: failed to setup listener, " "rdma_create_id() returned %d\n", ret); - goto out; + return ret; } sin.sin_family = AF_INET, -- cgit v0.10.2 From 45aa23b4cbd37408678c96cd113241860d3321f6 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 22 Apr 2010 09:02:43 -0600 Subject: PCI: revert broken device warning This reverts c519a5a7dab2d. That change added a warning about devices that didn't respond correctly when sizing BARs, which helped diagnose broken devices. But the test wasn't specific enough, so it also complained about working devices with zero-size BARs, e.g., https://bugzilla.kernel.org/show_bug.cgi?id=15822 Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 882bd8d..c82548a 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -174,19 +174,14 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, pci_read_config_dword(dev, pos, &sz); pci_write_config_dword(dev, pos, l); - if (!sz) - goto fail; /* BAR not implemented */ - /* * All bits set in sz means the device isn't working properly. - * If it's a memory BAR or a ROM, bit 0 must be clear; if it's - * an io BAR, bit 1 must be clear. + * If the BAR isn't implemented, all bits must be 0. If it's a + * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit + * 1 must be clear. */ - if (sz == 0xffffffff) { - dev_err(&dev->dev, "reg %x: invalid size %#x; broken device?\n", - pos, sz); + if (!sz || sz == 0xffffffff) goto fail; - } /* * I don't know how l can have all bits set. Copied from old code. @@ -249,17 +244,13 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, pos, res); } } else { - u32 size = pci_size(l, sz, mask); + sz = pci_size(l, sz, mask); - if (!size) { - dev_err(&dev->dev, "reg %x: invalid size " - "(l %#x sz %#x mask %#x); broken device?", - pos, l, sz, mask); + if (!sz) goto fail; - } res->start = l; - res->end = l + size; + res->end = l + sz; dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); } -- cgit v0.10.2 From 66528fdd45b082bf7c74687d72ae08afa4a446f8 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 20 Apr 2010 13:52:41 -0600 Subject: x86/PCI: parse additional host bridge window resource types This adds support for Memory24, Memory32, and Memory32Fixed descriptors in PCI host bridge _CRS. I experimentally determined that Windows (2008 R2) accepts these descriptors and treats them as windows that are forwarded to the PCI bus, e.g., if it finds any PCI devices with BARs outside the windows, it moves them into the windows. I don't know whether any machines actually use these descriptors in PCI host bridge _CRS methods, but if any exist and they're new enough that we automatically turn on "pci=use_crs", they will work with Windows but not with Linux. Here are the details: https://bugzilla.kernel.org/show_bug.cgi?id=15817 Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 334153c..44f83ce 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -66,13 +66,44 @@ resource_to_addr(struct acpi_resource *resource, struct acpi_resource_address64 *addr) { acpi_status status; - - status = acpi_resource_to_address64(resource, addr); - if (ACPI_SUCCESS(status) && - (addr->resource_type == ACPI_MEMORY_RANGE || - addr->resource_type == ACPI_IO_RANGE) && - addr->address_length > 0) { + struct acpi_resource_memory24 *memory24; + struct acpi_resource_memory32 *memory32; + struct acpi_resource_fixed_memory32 *fixed_memory32; + + memset(addr, 0, sizeof(*addr)); + switch (resource->type) { + case ACPI_RESOURCE_TYPE_MEMORY24: + memory24 = &resource->data.memory24; + addr->resource_type = ACPI_MEMORY_RANGE; + addr->minimum = memory24->minimum; + addr->address_length = memory24->address_length; + addr->maximum = addr->minimum + addr->address_length - 1; + return AE_OK; + case ACPI_RESOURCE_TYPE_MEMORY32: + memory32 = &resource->data.memory32; + addr->resource_type = ACPI_MEMORY_RANGE; + addr->minimum = memory32->minimum; + addr->address_length = memory32->address_length; + addr->maximum = addr->minimum + addr->address_length - 1; return AE_OK; + case ACPI_RESOURCE_TYPE_FIXED_MEMORY32: + fixed_memory32 = &resource->data.fixed_memory32; + addr->resource_type = ACPI_MEMORY_RANGE; + addr->minimum = fixed_memory32->address; + addr->address_length = fixed_memory32->address_length; + addr->maximum = addr->minimum + addr->address_length - 1; + return AE_OK; + case ACPI_RESOURCE_TYPE_ADDRESS16: + case ACPI_RESOURCE_TYPE_ADDRESS32: + case ACPI_RESOURCE_TYPE_ADDRESS64: + status = acpi_resource_to_address64(resource, addr); + if (ACPI_SUCCESS(status) && + (addr->resource_type == ACPI_MEMORY_RANGE || + addr->resource_type == ACPI_IO_RANGE) && + addr->address_length > 0) { + return AE_OK; + } + break; } return AE_ERROR; } -- cgit v0.10.2 From cc2893b6af5265baa1d68b17b136cffca9e40cfa Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 22 Apr 2010 09:30:51 -0400 Subject: PCI: Ensure we re-enable devices on resume If the firmware puts a device back into D0 state at resume time, we'll update its state in resume_noirq and thus skip the platform resume code. Calling that code twice should be safe and we ought to avoid getting to that point anyway, so remove the check and also allow the platform pci code to be called for D0. Fixes USB not being powered after resume on recent Lenovo machines. Acked-by: Alex Chiang Acked-by: Rafael J. Wysocki Signed-off-by: Matthew Garrett Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 5ea587e..3749912 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -679,7 +679,7 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state) */ int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state) { - return state > PCI_D0 ? + return state >= PCI_D0 ? pci_platform_power_transition(dev, state) : -EINVAL; } EXPORT_SYMBOL_GPL(__pci_complete_power_transition); @@ -716,10 +716,6 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) */ return 0; - /* Check if we're already there */ - if (dev->current_state == state) - return 0; - __pci_start_power_transition(dev, state); /* This device is quirked not to be put into D3, so -- cgit v0.10.2 From 2decb12e3ebec556520dd92178572449af8ed617 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 7 Apr 2010 09:57:22 +0000 Subject: omap: fix clocksource_32k to start from zero When the 32k sync timer is used for sched_clock(), it should count time from the kernel boot (clocksource init) instead of the last HW reset. Otherwise printk.time values will jump suddenly during the boot: [ 0.000000] calling omap2_clk_arch_init+0x0/0x138 @ 1 [ 0.000000] initcall omap2_clk_arch_init+0x0/0x138 returned -22 after 0 usecs [ 0.000000] initcall omap2_clk_arch_init+0x0/0x138 returned with error code -22 [ 0.000000] calling omap_init_clocksource_32k+0x0/0x98 @ 1 [ 508.697937] initcall omap_init_clocksource_32k+0x0/0x98 returned 0 after 0 usecs [ 508.697967] calling omap_init_devices+0x0/0x38 @ 1 [ 508.698425] initcall omap_init_devices+0x0/0x38 returned 0 after 0 usecs This will confuse tools such as scripts/bootgraph.pl. Signed-off-by: Aaro Koskinen Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 088c1a0..01cbb48 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -100,10 +100,17 @@ EXPORT_SYMBOL(omap_get_var_config); #include +/* + * offset_32k holds the init time counter value. It is then subtracted + * from every counter read to achieve a counter that counts time from the + * kernel boot (needed for sched_clock()). + */ +static u32 offset_32k __read_mostly; + #ifdef CONFIG_ARCH_OMAP16XX static cycle_t omap16xx_32k_read(struct clocksource *cs) { - return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED); + return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k; } #else #define omap16xx_32k_read NULL @@ -112,7 +119,7 @@ static cycle_t omap16xx_32k_read(struct clocksource *cs) #ifdef CONFIG_ARCH_OMAP2420 static cycle_t omap2420_32k_read(struct clocksource *cs) { - return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10); + return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k; } #else #define omap2420_32k_read NULL @@ -121,7 +128,7 @@ static cycle_t omap2420_32k_read(struct clocksource *cs) #ifdef CONFIG_ARCH_OMAP2430 static cycle_t omap2430_32k_read(struct clocksource *cs) { - return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10); + return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k; } #else #define omap2430_32k_read NULL @@ -130,7 +137,7 @@ static cycle_t omap2430_32k_read(struct clocksource *cs) #ifdef CONFIG_ARCH_OMAP3 static cycle_t omap34xx_32k_read(struct clocksource *cs) { - return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10); + return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k; } #else #define omap34xx_32k_read NULL @@ -139,7 +146,7 @@ static cycle_t omap34xx_32k_read(struct clocksource *cs) #ifdef CONFIG_ARCH_OMAP4 static cycle_t omap44xx_32k_read(struct clocksource *cs) { - return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10); + return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k; } #else #define omap44xx_32k_read NULL @@ -227,6 +234,8 @@ static int __init omap_init_clocksource_32k(void) clocksource_32k.mult = clocksource_hz2mult(32768, clocksource_32k.shift); + offset_32k = clocksource_32k.read(&clocksource_32k); + if (clocksource_register(&clocksource_32k)) printk(err, clocksource_32k.name); } -- cgit v0.10.2 From 46cdc4e431536c279b1ce00520d6fe6e9ca42b04 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 7 Apr 2010 09:57:23 +0000 Subject: arm: omap1: remove dead code from timer32k.c Trivial patch, no functional changes Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 9ad1185..20cfbcc 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -68,12 +68,6 @@ struct sys_timer omap_timer; * --------------------------------------------------------------------------- */ -#if defined(CONFIG_ARCH_OMAP16XX) -#define TIMER_32K_SYNCHRONIZED 0xfffbc410 -#else -#error OMAP 32KHz timer does not currently work on 15XX! -#endif - /* 16xx specific defines */ #define OMAP1_32K_TIMER_BASE 0xfffb9000 #define OMAP1_32K_TIMER_CR 0x08 @@ -150,15 +144,6 @@ static struct clock_event_device clockevent_32k_timer = { .set_mode = omap_32k_timer_set_mode, }; -/* - * The 32KHz synchronized timer is an additional timer on 16xx. - * It is always running. - */ -static inline unsigned long omap_32k_sync_timer_read(void) -{ - return omap_readl(TIMER_32K_SYNCHRONIZED); -} - static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = &clockevent_32k_timer; -- cgit v0.10.2 From 29501577a7f3c925d5273064752ce3dc356ccfad Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Mon, 5 Apr 2010 11:38:06 +0000 Subject: omap: gpio: fix incorrect matching of IRQ_TYPE_EDGE_BOTH Since IRQ_TYPE_EDGE_BOTH is defined as (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING), testing against it with a bitwise AND also matches both single-edge cases in addition to the intended both edges case. Fix it, replacing with a more accurate expression. Created and tested againts linux-2.6.34-rc3. Applicable to 2.6.33-stable as well. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 76a347b..45a225d 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -798,7 +798,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_BOTH) + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; @@ -812,7 +812,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_BOTH) + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; @@ -846,7 +846,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_7XX: reg += OMAP7XX_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_BOTH) + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; -- cgit v0.10.2 From 519e61666f4030426fc539d4e7102dc2bad41113 Mon Sep 17 00:00:00 2001 From: manjugk manjugk Date: Thu, 4 Mar 2010 07:11:56 +0000 Subject: omap: DMA: Init CDAC to zero The register DMA4_CDAC needs to be initialized to zero before starting DMA transfer. Cc: Santosh Shilimkar Cc: Govindraj R Cc: Kevin Hilman Reported-by:S, Venkatraman Signed-off-by: Manjunatha GK Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 2ab224c..f6c9bdc 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -936,6 +936,15 @@ void omap_start_dma(int lch) { u32 l; + /* + * The CPC/CDAC register needs to be initialized to zero + * before starting dma transfer. + */ + if (cpu_is_omap15xx()) + dma_write(0, CPC(lch)); + else + dma_write(0, CDAC(lch)); + if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch; char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT]; -- cgit v0.10.2 From 792590c72376649b4e315df386fd208b83db05b9 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Sun, 4 Apr 2010 22:20:58 +0100 Subject: squashfs: fix locking bug in zlib wrapper Fix locking bug in zlib wrapper introduced by recent decompressor changes. Signed-off-by: Phillip Lougher diff --git a/fs/squashfs/zlib_wrapper.c b/fs/squashfs/zlib_wrapper.c index 15a03d0..7a60387 100644 --- a/fs/squashfs/zlib_wrapper.c +++ b/fs/squashfs/zlib_wrapper.c @@ -128,8 +128,9 @@ static int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer, goto release_mutex; } + length = stream->total_out; mutex_unlock(&msblk->read_data_mutex); - return stream->total_out; + return length; release_mutex: mutex_unlock(&msblk->read_data_mutex); -- cgit v0.10.2 From fda48a0d7a8412cedacda46a9c0bf8ef9cd13559 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 21 Apr 2010 09:26:15 +0000 Subject: tcp: bind() fix when many ports are bound Port autoselection done by kernel only works when number of bound sockets is under a threshold (typically 30000). When this threshold is over, we must check if there is a conflict before exiting first loop in inet_csk_get_port() Change inet_csk_bind_conflict() to forbid two reuse-enabled sockets to bind on same (address,port) tuple (with a non ANY address) Same change for inet6_csk_bind_conflict() Reported-by: Gaspar Chilingarov Signed-off-by: Eric Dumazet Acked-by: Evgeniy Polyakov Signed-off-by: David S. Miller diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index 8da6429..14825eb 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -70,13 +70,17 @@ int inet_csk_bind_conflict(const struct sock *sk, (!sk->sk_bound_dev_if || !sk2->sk_bound_dev_if || sk->sk_bound_dev_if == sk2->sk_bound_dev_if)) { + const __be32 sk2_rcv_saddr = inet_rcv_saddr(sk2); + if (!reuse || !sk2->sk_reuse || sk2->sk_state == TCP_LISTEN) { - const __be32 sk2_rcv_saddr = inet_rcv_saddr(sk2); if (!sk2_rcv_saddr || !sk_rcv_saddr || sk2_rcv_saddr == sk_rcv_saddr) break; - } + } else if (reuse && sk2->sk_reuse && + sk2_rcv_saddr && + sk2_rcv_saddr == sk_rcv_saddr) + break; } } return node != NULL; @@ -120,9 +124,11 @@ again: smallest_size = tb->num_owners; smallest_rover = rover; if (atomic_read(&hashinfo->bsockets) > (high - low) + 1) { - spin_unlock(&head->lock); - snum = smallest_rover; - goto have_snum; + if (!inet_csk(sk)->icsk_af_ops->bind_conflict(sk, tb)) { + spin_unlock(&head->lock); + snum = smallest_rover; + goto have_snum; + } } } goto next; diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c index 628db24..b4b7d40 100644 --- a/net/ipv6/inet6_connection_sock.c +++ b/net/ipv6/inet6_connection_sock.c @@ -42,11 +42,16 @@ int inet6_csk_bind_conflict(const struct sock *sk, if (sk != sk2 && (!sk->sk_bound_dev_if || !sk2->sk_bound_dev_if || - sk->sk_bound_dev_if == sk2->sk_bound_dev_if) && - (!sk->sk_reuse || !sk2->sk_reuse || - sk2->sk_state == TCP_LISTEN) && - ipv6_rcv_saddr_equal(sk, sk2)) - break; + sk->sk_bound_dev_if == sk2->sk_bound_dev_if)) { + if ((!sk->sk_reuse || !sk2->sk_reuse || + sk2->sk_state == TCP_LISTEN) && + ipv6_rcv_saddr_equal(sk, sk2)) + break; + else if (sk->sk_reuse && sk2->sk_reuse && + !ipv6_addr_any(inet6_rcv_saddr(sk2)) && + ipv6_rcv_saddr_equal(sk, sk2)) + break; + } } return node != NULL; -- cgit v0.10.2 From 677d07683ea826c19ddcb156e9c1337cd7bd8539 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 22 Apr 2010 22:58:50 -0400 Subject: drm/radeon/kms/evergreen: fix LUT setup Must have gotten broken during an earlier rebase. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index b8d6728..bb1c122 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -86,12 +86,12 @@ static void evergreen_crtc_load_lut(struct drm_crtc *crtc) WREG32(EVERGREEN_DC_LUT_WHITE_OFFSET_GREEN + radeon_crtc->crtc_offset, 0xffff); WREG32(EVERGREEN_DC_LUT_WHITE_OFFSET_RED + radeon_crtc->crtc_offset, 0xffff); - WREG32(EVERGREEN_DC_LUT_RW_MODE, radeon_crtc->crtc_id); - WREG32(EVERGREEN_DC_LUT_WRITE_EN_MASK, 0x00000007); + WREG32(EVERGREEN_DC_LUT_RW_MODE + radeon_crtc->crtc_offset, 0); + WREG32(EVERGREEN_DC_LUT_WRITE_EN_MASK + radeon_crtc->crtc_offset, 0x00000007); - WREG32(EVERGREEN_DC_LUT_RW_INDEX, 0); + WREG32(EVERGREEN_DC_LUT_RW_INDEX + radeon_crtc->crtc_offset, 0); for (i = 0; i < 256; i++) { - WREG32(EVERGREEN_DC_LUT_30_COLOR, + WREG32(EVERGREEN_DC_LUT_30_COLOR + radeon_crtc->crtc_offset, (radeon_crtc->lut_r[i] << 20) | (radeon_crtc->lut_g[i] << 10) | (radeon_crtc->lut_b[i] << 0)); -- cgit v0.10.2 From 9c950a43dd4d1e22a4b893c991871bac26930f97 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 23 Apr 2010 13:21:58 +1000 Subject: drm/radeon/kms: don't print error for legal crtcs. With evergreen this is bounded by num_crtc not by 0,1. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 20ec276..8d1ad20 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -164,7 +164,7 @@ u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc) { struct radeon_device *rdev = dev->dev_private; - if (crtc < 0 || crtc > 1) { + if (crtc < 0 || crtc >= rdev->num_crtc) { DRM_ERROR("Invalid crtc %d\n", crtc); return -EINVAL; } @@ -176,7 +176,7 @@ int radeon_enable_vblank_kms(struct drm_device *dev, int crtc) { struct radeon_device *rdev = dev->dev_private; - if (crtc < 0 || crtc > 1) { + if (crtc < 0 || crtc >= rdev->num_crtc) { DRM_ERROR("Invalid crtc %d\n", crtc); return -EINVAL; } @@ -190,7 +190,7 @@ void radeon_disable_vblank_kms(struct drm_device *dev, int crtc) { struct radeon_device *rdev = dev->dev_private; - if (crtc < 0 || crtc > 1) { + if (crtc < 0 || crtc >= rdev->num_crtc) { DRM_ERROR("Invalid crtc %d\n", crtc); return; } -- cgit v0.10.2 From 94f7bf647315472c80b8368c849739038e5620a3 Mon Sep 17 00:00:00 2001 From: Tormod Volden Date: Thu, 22 Apr 2010 16:57:32 -0400 Subject: drm/radeon: 9800 SE has only one quadpipe Although these cards have 2 pipelines on the silicon only the first passed the QA and the other should be disabled. http://www.digital-daily.com/video/ati-radeon9800se/ http://www.rojakpot.com/showarticle.aspx?artno=101&pgno=1 agd5f: add some other SE cards as well; fix up kms Signed-off-by: Tormod Volden Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 2a9b594..6ec86fc 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -323,13 +323,12 @@ void r300_gpu_init(struct radeon_device *rdev) uint32_t gb_tile_config, tmp; r100_hdp_reset(rdev); - /* FIXME: rv380 one pipes ? */ if ((rdev->family == CHIP_R300 && rdev->pdev->device != 0x4144) || - (rdev->family == CHIP_R350)) { + (rdev->family == CHIP_R350 && rdev->pdev->device != 0x4148)) { /* r300,r350 */ rdev->num_gb_pipes = 2; } else { - /* rv350,rv370,rv380,r300 AD */ + /* rv350,rv370,rv380,r300 AD, r350 AH */ rdev->num_gb_pipes = 1; } rdev->num_z_pipes = 1; diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index 0b8603c..100af65 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -58,6 +58,12 @@ void r420_pipes_init(struct radeon_device *rdev) /* get max number of pipes */ gb_pipe_select = RREG32(0x402C); num_pipes = ((gb_pipe_select >> 12) & 3) + 1; + + /* SE chips have 1 pipe */ + if ((rdev->pdev->device == 0x5e4c) || + (rdev->pdev->device == 0x5e4f)) + num_pipes = 1; + rdev->num_gb_pipes = num_pipes; tmp = 0; switch (num_pipes) { diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 419630d..2f042a3 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -435,14 +435,19 @@ static void radeon_init_pipes(struct drm_device *dev) if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) { gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT); dev_priv->num_gb_pipes = ((gb_pipe_sel >> 12) & 0x3) + 1; + /* SE cards have 1 pipe */ + if ((dev->pdev->device == 0x5e4c) || + (dev->pdev->device == 0x5e4f)) + dev_priv->num_gb_pipes = 1; } else { /* R3xx */ if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300 && dev->pdev->device != 0x4144) || - ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350)) { + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350 && + dev->pdev->device != 0x4148)) { dev_priv->num_gb_pipes = 2; } else { - /* RV3xx/R300 AD */ + /* RV3xx/R300 AD/R350 AH */ dev_priv->num_gb_pipes = 1; } } -- cgit v0.10.2 From 0e0280dc2b0c7395a880d25544b47f3e3e3f79db Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Wed, 21 Apr 2010 19:55:43 -0400 Subject: ALSA: hda: Use LPIB quirk for DG965OT board version AAD63733-203 BugLink: https://launchpad.net/bugs/459083 The OR has verified with 2.6.32.11 and the latest alsa-driver stable daily snapshot that position_fix=1 is necessary for the external mic to work and for PulseAudio not to crash constantly. This patch is necessary also for 2.6.32.11 and 2.6.33.2. Reported-by: Tested-by: Cc: Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index f669442..cec68152 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2273,6 +2273,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = { SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB), SND_PCI_QUIRK(0x1565, 0x820f, "Biostar Microtech", POS_FIX_LPIB), SND_PCI_QUIRK(0x1565, 0x8218, "Biostar Microtech", POS_FIX_LPIB), + SND_PCI_QUIRK(0x8086, 0x2503, "DG965OT AAD63733-203", POS_FIX_LPIB), SND_PCI_QUIRK(0x8086, 0xd601, "eMachines T5212", POS_FIX_LPIB), {} }; -- cgit v0.10.2 From 5c1bccf645d4ab65e4c7502acb42e8b9afdb5bdc Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Thu, 22 Apr 2010 17:54:45 -0400 Subject: ALSA: hda: Use STAC_DELL_M6_BOTH quirk for Dell Studio 1558 BugLink: https://launchpad.net/bugs/568600 The OR has verified that the dell-m6 model quirk is necessary for audio to be audible by default on the Dell Studio XPS 1645. This change is necessary for 2.6.32.11 and 2.6.33.2 alike. Reported-by: Andy Ross Tested-by: Andy Ross Cc: Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 81ecd93..7fb7d01 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1609,6 +1609,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { "Dell Studio 1557", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02fe, "Dell Studio XPS 1645", STAC_DELL_M6_BOTH), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0413, + "Dell Studio 1558", STAC_DELL_M6_BOTH), {} /* terminator */ }; -- cgit v0.10.2 From c6f8505e4627ba8ca46cbcb602ad82e7f17a7122 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 23 Apr 2010 02:26:55 -0400 Subject: drm/radeon/kms/evergreen: No EnableYUV table DCE4 cards don't have an EnableYUV table. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 30293be..fed7b808 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -1326,7 +1326,7 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, radeon_encoder->pixel_clock = adjusted_mode->clock; - if (ASIC_IS_AVIVO(rdev)) { + if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE4(rdev)) { if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)) atombios_yuv_setup(encoder, true); else -- cgit v0.10.2 From 0ad707407d933841a0f337d6edccbc1d6c83e186 Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Wed, 7 Apr 2010 09:34:56 +0100 Subject: ARM: 6030/1: KS8695: enable console Add add_preferred_console() to ks8695_console_init() to enable the console Signed-off-by: Yegor Yefremov Acked-by: Andrew Victor Signed-off-by: Russell King diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c index 2e71bbc..b196202 100644 --- a/drivers/serial/serial_ks8695.c +++ b/drivers/serial/serial_ks8695.c @@ -650,6 +650,7 @@ static struct console ks8695_console = { static int __init ks8695_console_init(void) { + add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL); register_console(&ks8695_console); return 0; } -- cgit v0.10.2 From 1918ad77f7f908ed67cf37c505c6ad4ac52f1ecf Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 23 Apr 2010 09:32:23 -0700 Subject: drm/i915: fix non-Ironlake 965 class crashes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit My PIPE_CONTROL fix (just sent via Eric's tree) was buggy; I was testing a whole set of patches together and missed a conversion to the new HAS_PIPE_CONTROL macro, which will cause breakage on non-Ironlake 965 class chips. Fortunately, the fix is trivial and has been tested. Be sure to use the HAS_PIPE_CONTROL macro in i915_get_gem_seqno, or we'll end up reading the wrong graphics memory, likely causing hangs, crashes, or worse. Reported-by: Zdenek Kabelac Reported-by: Toralf Förster Tested-by: Toralf Förster Signed-off-by: Jesse Barnes Signed-off-by: Linus Torvalds diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 7f52cc1..ef3d91d 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1793,7 +1793,7 @@ i915_get_gem_seqno(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; - if (IS_I965G(dev)) + if (HAS_PIPE_CONTROL(dev)) return ((volatile u32 *)(dev_priv->seqno_page))[0]; else return READ_HWSP(dev_priv, I915_GEM_HWS_INDEX); -- cgit v0.10.2 From 3a3076f4d6e2fa31338a0b007df42a3b32f079e0 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 23 Apr 2010 12:17:17 -0400 Subject: Cleanup generic block based fiemap This cleans up a few of the complaints of __generic_block_fiemap. I've fixed all the typing stuff, used inline functions instead of macros, gotten rid of a couple of variables, and made sure the size and block requests are all block aligned. It also fixes a problem where sometimes FIEMAP_EXTENT_LAST wasn't being set properly. Signed-off-by: Josef Bacik Signed-off-by: Linus Torvalds diff --git a/fs/ioctl.c b/fs/ioctl.c index 6c75110..7faefb4 100644 --- a/fs/ioctl.c +++ b/fs/ioctl.c @@ -228,14 +228,23 @@ static int ioctl_fiemap(struct file *filp, unsigned long arg) #ifdef CONFIG_BLOCK -#define blk_to_logical(inode, blk) (blk << (inode)->i_blkbits) -#define logical_to_blk(inode, offset) (offset >> (inode)->i_blkbits); +static inline sector_t logical_to_blk(struct inode *inode, loff_t offset) +{ + return (offset >> inode->i_blkbits); +} + +static inline loff_t blk_to_logical(struct inode *inode, sector_t blk) +{ + return (blk << inode->i_blkbits); +} /** * __generic_block_fiemap - FIEMAP for block based inodes (no locking) - * @inode - the inode to map - * @arg - the pointer to userspace where we copy everything to - * @get_block - the fs's get_block function + * @inode: the inode to map + * @fieinfo: the fiemap info struct that will be passed back to userspace + * @start: where to start mapping in the inode + * @len: how much space to map + * @get_block: the fs's get_block function * * This does FIEMAP for block based inodes. Basically it will just loop * through get_block until we hit the number of extents we want to map, or we @@ -250,58 +259,63 @@ static int ioctl_fiemap(struct file *filp, unsigned long arg) */ int __generic_block_fiemap(struct inode *inode, - struct fiemap_extent_info *fieinfo, u64 start, - u64 len, get_block_t *get_block) + struct fiemap_extent_info *fieinfo, loff_t start, + loff_t len, get_block_t *get_block) { - struct buffer_head tmp; - unsigned long long start_blk; - long long length = 0, map_len = 0; + struct buffer_head map_bh; + sector_t start_blk, last_blk; + loff_t isize = i_size_read(inode); u64 logical = 0, phys = 0, size = 0; u32 flags = FIEMAP_EXTENT_MERGED; - int ret = 0, past_eof = 0, whole_file = 0; + bool past_eof = false, whole_file = false; + int ret = 0; - if ((ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC))) + ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC); + if (ret) return ret; - start_blk = logical_to_blk(inode, start); - - length = (long long)min_t(u64, len, i_size_read(inode)); - if (length < len) - whole_file = 1; + /* + * Either the i_mutex or other appropriate locking needs to be held + * since we expect isize to not change at all through the duration of + * this call. + */ + if (len >= isize) { + whole_file = true; + len = isize; + } - map_len = length; + start_blk = logical_to_blk(inode, start); + last_blk = logical_to_blk(inode, start + len - 1); do { /* * we set b_size to the total size we want so it will map as * many contiguous blocks as possible at once */ - memset(&tmp, 0, sizeof(struct buffer_head)); - tmp.b_size = map_len; + memset(&map_bh, 0, sizeof(struct buffer_head)); + map_bh.b_size = len; - ret = get_block(inode, start_blk, &tmp, 0); + ret = get_block(inode, start_blk, &map_bh, 0); if (ret) break; /* HOLE */ - if (!buffer_mapped(&tmp)) { - length -= blk_to_logical(inode, 1); + if (!buffer_mapped(&map_bh)) { start_blk++; /* - * we want to handle the case where there is an + * We want to handle the case where there is an * allocated block at the front of the file, and then * nothing but holes up to the end of the file properly, * to make sure that extent at the front gets properly * marked with FIEMAP_EXTENT_LAST */ if (!past_eof && - blk_to_logical(inode, start_blk) >= - blk_to_logical(inode, 0)+i_size_read(inode)) + blk_to_logical(inode, start_blk) >= isize) past_eof = 1; /* - * first hole after going past the EOF, this is our + * First hole after going past the EOF, this is our * last extent */ if (past_eof && size) { @@ -309,15 +323,18 @@ int __generic_block_fiemap(struct inode *inode, ret = fiemap_fill_next_extent(fieinfo, logical, phys, size, flags); - break; + } else if (size) { + ret = fiemap_fill_next_extent(fieinfo, logical, + phys, size, flags); + size = 0; } /* if we have holes up to/past EOF then we're done */ - if (length <= 0 || past_eof) + if (start_blk > last_blk || past_eof || ret) break; } else { /* - * we have gone over the length of what we wanted to + * We have gone over the length of what we wanted to * map, and it wasn't the entire file, so add the extent * we got last time and exit. * @@ -331,7 +348,7 @@ int __generic_block_fiemap(struct inode *inode, * are good to go, just add the extent to the fieinfo * and break */ - if (length <= 0 && !whole_file) { + if (start_blk > last_blk && !whole_file) { ret = fiemap_fill_next_extent(fieinfo, logical, phys, size, flags); @@ -351,11 +368,10 @@ int __generic_block_fiemap(struct inode *inode, } logical = blk_to_logical(inode, start_blk); - phys = blk_to_logical(inode, tmp.b_blocknr); - size = tmp.b_size; + phys = blk_to_logical(inode, map_bh.b_blocknr); + size = map_bh.b_size; flags = FIEMAP_EXTENT_MERGED; - length -= tmp.b_size; start_blk += logical_to_blk(inode, size); /* @@ -363,15 +379,13 @@ int __generic_block_fiemap(struct inode *inode, * soon as we find a hole that the last extent we found * is marked with FIEMAP_EXTENT_LAST */ - if (!past_eof && - logical+size >= - blk_to_logical(inode, 0)+i_size_read(inode)) - past_eof = 1; + if (!past_eof && logical + size >= isize) + past_eof = true; } cond_resched(); } while (1); - /* if ret is 1 then we just hit the end of the extent array */ + /* If ret is 1 then we just hit the end of the extent array */ if (ret == 1) ret = 0; diff --git a/include/linux/fs.h b/include/linux/fs.h index 39d57bc..44f35ae 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2315,8 +2315,9 @@ extern int vfs_fstatat(int , char __user *, struct kstat *, int); extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd, unsigned long arg); extern int __generic_block_fiemap(struct inode *inode, - struct fiemap_extent_info *fieinfo, u64 start, - u64 len, get_block_t *get_block); + struct fiemap_extent_info *fieinfo, + loff_t start, loff_t len, + get_block_t *get_block); extern int generic_block_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, u64 start, u64 len, get_block_t *get_block); -- cgit v0.10.2 From c9db3efee16add57ea459a00dfa00610fcbce931 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Sat, 10 Apr 2010 11:02:51 +0200 Subject: eeepc-laptop: add missing sparse_keymap_free Also remove legacy keymap which was not used since we use sparse_keymap. Signed-off-by: Corentin Chary diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 54a0157..0306174 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -169,7 +169,6 @@ struct eeepc_laptop { struct backlight_device *backlight_device; struct input_dev *inputdev; - struct key_entry *keymap; struct rfkill *wlan_rfkill; struct rfkill *bluetooth_rfkill; @@ -1204,8 +1203,8 @@ static int eeepc_input_init(struct eeepc_laptop *eeepc) static void eeepc_input_exit(struct eeepc_laptop *eeepc) { if (eeepc->inputdev) { + sparse_keymap_free(eeepc->inputdev); input_unregister_device(eeepc->inputdev); - kfree(eeepc->keymap); } } -- cgit v0.10.2 From df571c4ab32da9bc05a7db98516fc06ef3cdc5d1 Mon Sep 17 00:00:00 2001 From: Richard Woodruff Date: Wed, 7 Apr 2010 07:47:21 +0000 Subject: omap4: Fix build break when used with gcc-4.4.1 (2009-q3) This patch adds argument to smc calls as gcc-4.4.1 requires it otherwise the build breaks with 2009-q3 toolchanin. arch/arm/mach-omap2/omap-headsmp.S: Assembler messages: arch/arm/mach-omap2/omap-headsmp.S:36: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:55: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:63: Error: missing expression -- `smc' make[1]: *** [arch/arm/mach-omap2/omap-headsmp.o] Error 1 Signed-off-by: Richard Woodruff Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index aa3f65c..ef0e7a0 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -33,7 +33,7 @@ ENTRY(omap_secondary_startup) hold: ldr r12,=0x103 dsb - smc @ read from AuxCoreBoot0 + smc #0 @ read from AuxCoreBoot0 mov r0, r0, lsr #9 mrc p15, 0, r4, c0, c0, 5 and r4, r4, #0x0f @@ -52,7 +52,7 @@ ENTRY(omap_modify_auxcoreboot0) stmfd sp!, {r1-r12, lr} ldr r12, =0x104 dsb - smc + smc #0 ldmfd sp!, {r1-r12, pc} END(omap_modify_auxcoreboot0) @@ -60,6 +60,6 @@ ENTRY(omap_auxcoreboot_addr) stmfd sp!, {r2-r12, lr} ldr r12, =0x105 dsb - smc + smc #0 ldmfd sp!, {r2-r12, pc} END(omap_auxcoreboot_addr) diff --git a/arch/arm/mach-omap2/omap44xx-smc.S b/arch/arm/mach-omap2/omap44xx-smc.S index 89bb2b1..f61c777 100644 --- a/arch/arm/mach-omap2/omap44xx-smc.S +++ b/arch/arm/mach-omap2/omap44xx-smc.S @@ -27,6 +27,6 @@ ENTRY(omap_smc1) mov r12, r0 mov r0, r1 dsb - smc + smc #0 ldmfd sp!, {r2-r12, pc} END(omap_smc1) -- cgit v0.10.2 From 67d24820c2f8e4df26e2ce6c7463db3f9d187f1f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 21 Apr 2010 15:27:25 -0700 Subject: omap2: Fix ARM processor check for 24xx The value to check is 7 for V6 instead. The code has been working as it falls through to 24xx code if the other checks fail. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index ff25c7e..50fd749 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -52,7 +52,7 @@ omap_irq_base: .word 0 mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision and \tmp, \tmp, #0x000f0000 @ only check architecture - cmp \tmp, #0x00060000 @ is v6? + cmp \tmp, #0x00070000 @ is v6? beq 2400f @ found v6 so it's omap24xx mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision and \tmp, \tmp, #0x000000f0 @ check cortex 8 or 9 -- cgit v0.10.2 From 1dea5c6b5876ea917a082e95a76c10aac307d4ec Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 21 Apr 2010 15:27:24 -0700 Subject: omap: Fix n8x0 mmc_mmc_init compile warnings and typos Fix warning: 'return' with a value, in function returning void in n8x0_mmc_init. Also fix a search and replace typo. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index da9bcb8..3ccc34e 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -216,7 +216,7 @@ static void __init n8x0_onenand_init(void) {} */ #define N8X0_SLOT_SWITCH_GPIO 96 #define N810_EMMC_VSD_GPIO 23 -#define NN810_EMMC_VIO_GPIO 9 +#define N810_EMMC_VIO_GPIO 9 static int n8x0_mmc_switch_slot(struct device *dev, int slot) { @@ -304,10 +304,10 @@ static void n810_set_power_emmc(struct device *dev, if (power_on) { gpio_set_value(N810_EMMC_VSD_GPIO, 1); msleep(1); - gpio_set_value(NN810_EMMC_VIO_GPIO, 1); + gpio_set_value(N810_EMMC_VIO_GPIO, 1); msleep(1); } else { - gpio_set_value(NN810_EMMC_VIO_GPIO, 0); + gpio_set_value(N810_EMMC_VIO_GPIO, 0); msleep(50); gpio_set_value(N810_EMMC_VSD_GPIO, 0); msleep(50); @@ -468,7 +468,7 @@ static void n8x0_mmc_cleanup(struct device *dev) if (machine_is_nokia_n810()) { gpio_free(N810_EMMC_VSD_GPIO); - gpio_free(NN810_EMMC_VIO_GPIO); + gpio_free(N810_EMMC_VIO_GPIO); } } @@ -529,7 +529,7 @@ void __init n8x0_mmc_init(void) err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch"); if (err) - return err; + return; gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0); @@ -537,17 +537,17 @@ void __init n8x0_mmc_init(void) err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf"); if (err) { gpio_free(N8X0_SLOT_SWITCH_GPIO); - return err; + return; } gpio_direction_output(N810_EMMC_VSD_GPIO, 0); - err = gpio_request(NN810_EMMC_VIO_GPIO, "MMC slot 2 Vdd"); + err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd"); if (err) { gpio_free(N8X0_SLOT_SWITCH_GPIO); gpio_free(N810_EMMC_VSD_GPIO); - return err; + return; } - gpio_direction_output(NN810_EMMC_VIO_GPIO, 0); + gpio_direction_output(N810_EMMC_VIO_GPIO, 0); } mmc_data[0] = &mmc1_data; -- cgit v0.10.2 From f6b74535b5286ddb7a8c86a48ec372615cffbc4c Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Mon, 1 Mar 2010 15:02:36 +0000 Subject: omap3: Fix EHCI port for IGEP v2 board IGEP v2 uses EHCI port 1 instead of EHCI port 2. Signed-off-by: Enric Balletbo i Serra Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 3c7789d..d55c57b 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -458,13 +458,13 @@ static struct omap_musb_board_data musb_board_data = { }; static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET, + .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET, + .reset_gpio_port[1] = -EINVAL, .reset_gpio_port[2] = -EINVAL, }; -- cgit v0.10.2 From 9df76b7f179538903dfb4660ae27c807dd27535a Mon Sep 17 00:00:00 2001 From: kishore kadiyala Date: Wed, 21 Apr 2010 18:19:37 +0000 Subject: OMAP4-HSMMC: FIX for MMC5 Controller IRQ Base This patch fixes HSMMC Controller5 IRQ Base. Signed-off-by: Kishore Kadiyala Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 23e4d77..2271b9b 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -726,7 +726,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, if (!cpu_is_omap44xx()) return; base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET; - irq = OMAP44XX_IRQ_MMC4; + irq = OMAP44XX_IRQ_MMC5; break; default: continue; -- cgit v0.10.2 From 3655e0b415506a4d162ed4b2b12408c80dcfa4a2 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 21 Apr 2010 18:21:04 +0000 Subject: OMAP4: Fix for CONTROL register Base This patch fixes the base address of CONTROL register on OMAP4430SDP. The control base is used by peripherals like MMC1 for PBIAS configuration. Signed-off-by: Santosh Shilimkar Signed-off-by: Kishore Kadiyala Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h index 2302474..b3ef1a7 100644 --- a/arch/arm/plat-omap/include/plat/omap44xx.h +++ b/arch/arm/plat-omap/include/plat/omap44xx.h @@ -32,7 +32,7 @@ #define OMAP4430_PRM_BASE 0x4a306000 #define OMAP44XX_GPMC_BASE 0x50000000 #define OMAP443X_SCM_BASE 0x4a002000 -#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE +#define OMAP443X_CTRL_BASE 0x4a100000 #define OMAP44XX_IC_BASE 0x48200000 #define OMAP44XX_IVA_INTC_BASE 0x40000000 #define IRQ_SIR_IRQ 0x0040 -- cgit v0.10.2 From 2135bb53fb6c9a4b2ed7901b2b176a6100e29f6b Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:16 +0000 Subject: omap: Devkit8000: Fix wrong usb port on Devkit8000 Disable the nonexistent ehci port on Devkit8000. Signed-off-by: Thomas Weber Acked-by: Anand Gadiyar Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 5bfc13b..db4c093 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -639,12 +639,12 @@ static struct omap_musb_board_data musb_board_data = { static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, + .reset_gpio_port[1] = -EINVAL, .reset_gpio_port[2] = -EINVAL }; -- cgit v0.10.2 From c8334810db6e74019048cb3fc17c5e0b4d0c8c68 Mon Sep 17 00:00:00 2001 From: Abraham Arce Date: Thu, 22 Apr 2010 14:42:15 +0000 Subject: OMAP4: Clocks: Change SPI Instance Names Change the name for the spi instances on omap44xx_clks to match the names omap2 spi driver gives: omap-mcspi.1 -> omap2_mcspi.1 omap-mcspi.2 -> omap2_mcspi.2 omap-mcspi.3 -> omap2_mcspi.3 omap-mcspi.4 -> omap2_mcspi.4 Signed-off-by: Abraham Arce Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 28b1079..a5c0c9c 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -2671,10 +2671,10 @@ static struct omap_clk omap44xx_clks[] = { CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X), CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X), CLK("omap-mcbsp.4", "ick", &dummy_ck, CK_443X), - CLK("omap-mcspi.1", "ick", &dummy_ck, CK_443X), - CLK("omap-mcspi.2", "ick", &dummy_ck, CK_443X), - CLK("omap-mcspi.3", "ick", &dummy_ck, CK_443X), - CLK("omap-mcspi.4", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.1", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X), CLK(NULL, "uart1_ick", &dummy_ck, CK_443X), CLK(NULL, "uart2_ick", &dummy_ck, CK_443X), CLK(NULL, "uart3_ick", &dummy_ck, CK_443X), -- cgit v0.10.2 From 562468bd697a88ad78a751823dc92f027f8c179c Mon Sep 17 00:00:00 2001 From: "stanley.miao" Date: Tue, 20 Apr 2010 06:33:26 +0000 Subject: omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabled If CONFIG_MTD_NAND_OMAP2 is not enabled, there will be a compile error, "gpmc_nand_init() is not defined". Add a inline noop function to fix it. Signed-off-by: Stanley.Miao Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h index 6ba88d2..f8efd546 100644 --- a/arch/arm/plat-omap/include/plat/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -29,4 +29,11 @@ struct omap_nand_platform_data { /* size (4 KiB) for IO mapping */ #define NAND_IO_SIZE SZ_4K +#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) extern int gpmc_nand_init(struct omap_nand_platform_data *d); +#else +static inline int gpmc_nand_init(struct omap_nand_platform_data *d) +{ + return 0; +} +#endif -- cgit v0.10.2 From 908c08d523f432a1b52298e2a50b21f4eebe6707 Mon Sep 17 00:00:00 2001 From: "stanley.miao" Date: Tue, 20 Apr 2010 06:33:27 +0000 Subject: omap: remove one of the define of INT_34XX_BENCH_MPU_EMUL INT_34XX_BENCH_MPU_EMUL was defined twice, another is at Line 312. Signed-off-by: Stanley.Miao Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index b65088a..4017019 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -345,8 +345,6 @@ #define INT_34XX_MMC3_IRQ 94 #define INT_34XX_GPT12_IRQ 95 -#define INT_34XX_BENCH_MPU_EMUL 3 - #define INT_35XX_HECC0_IRQ 24 #define INT_35XX_HECC1_IRQ 28 #define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67 -- cgit v0.10.2 From 5241b6b3bfa7be3661398cf93cb3dd187aeb65c6 Mon Sep 17 00:00:00 2001 From: "stanley.miao" Date: Tue, 20 Apr 2010 06:33:29 +0000 Subject: AM3517: initialize i2c subsystem after mux subsystem The initialize of i2c subsystem will set pinmux, so it should be done after the initialize of mux subsystem initialization. Signed-off-by: Stanley.Miao Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 6ae8805..c1c4389 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -294,9 +294,9 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init am3517_evm_init(void) { - am3517_evm_i2c_init(); - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + + am3517_evm_i2c_init(); platform_add_devices(am3517_evm_devices, ARRAY_SIZE(am3517_evm_devices)); -- cgit v0.10.2 From 11e1ef2d105900a302b7ca92bcaf96a96d0274a1 Mon Sep 17 00:00:00 2001 From: "stanley.miao" Date: Tue, 20 Apr 2010 06:33:30 +0000 Subject: omap: fix a gpmc nand problem If gpmc_t isn't given, we don't need to set timing for gpmc, or it will cause a Oops. Signed-off-by: Stanley.Miao Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 64d74f0..e57fb29 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -39,6 +39,9 @@ static int omap2_nand_gpmc_retime(void) struct gpmc_timings t; int err; + if (!gpmc_nand_data->gpmc_t) + return 0; + memset(&t, 0, sizeof(t)); t.sync_clk = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->sync_clk); t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on); -- cgit v0.10.2 From c8fa4d2738bc747e417a220e6ceb21e8c148266f Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 19 Apr 2010 13:52:09 +0000 Subject: omap: rx51_defconfig: Remove duplicate phonet Phonet is enabled by the commit bce54fed941e03695ab557100a4bd1e457abca42 and this duplicate gives a warning when doing make rx51_defconfig. Signed-off-by: Jarkko Nikula Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index 45135ff..cc6a32a 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -480,7 +480,6 @@ CONFIG_BT_HIDP=m # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set -- cgit v0.10.2 From cc352a3432abffb590b447fef89b4b5026387302 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 19 Apr 2010 13:52:10 +0000 Subject: omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y options Modern udev will not work with the CONFIG_SYSFS_DEPRECATED*=y options and it seems also that the Maemo release works without when testing with the Maemo 2.6.28 kernel. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index cc6a32a..473f9e1 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -59,8 +59,6 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y -- cgit v0.10.2 From aee44c30e33bf8126773d1e2963e330b784ccd7c Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 7 Apr 2010 07:47:23 +0000 Subject: omap4: Fix McBSP4 base address This patch fixes the McBSP4 base address for OMAP4 Signed-off-by: Balaji T K Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 3974835..7de903d 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -59,7 +59,7 @@ #define OMAP44XX_MCBSP1_BASE 0x49022000 #define OMAP44XX_MCBSP2_BASE 0x49024000 #define OMAP44XX_MCBSP3_BASE 0x49026000 -#define OMAP44XX_MCBSP4_BASE 0x48074000 +#define OMAP44XX_MCBSP4_BASE 0x48096000 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -- cgit v0.10.2 From 31849483f17dd76d48341dfc6dfc38261b630d26 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Thu, 25 Mar 2010 20:21:54 +0000 Subject: omap: board-sdp-flash.c: Fix typos in debug output Corrected type of flash in output (OneNAND => NOR). Removed whitespace after newline in output. Removed double whitespace in output. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-sdp-flash.c b/arch/arm/mach-omap2/board-sdp-flash.c index b1b88de..2d02632 100644 --- a/arch/arm/mach-omap2/board-sdp-flash.c +++ b/arch/arm/mach-omap2/board-sdp-flash.c @@ -253,20 +253,20 @@ void __init sdp_flash_init(struct flash_partitions sdp_partition_info[]) } if (norcs > GPMC_CS_NUM) - printk(KERN_INFO "OneNAND: Unable to find configuration " - " in GPMC\n "); + printk(KERN_INFO "NOR: Unable to find configuration " + "in GPMC\n"); else board_nor_init(sdp_partition_info[0], norcs); if (onenandcs > GPMC_CS_NUM) printk(KERN_INFO "OneNAND: Unable to find configuration " - " in GPMC\n "); + "in GPMC\n"); else board_onenand_init(sdp_partition_info[1], onenandcs); if (nandcs > GPMC_CS_NUM) printk(KERN_INFO "NAND: Unable to find configuration " - " in GPMC\n "); + "in GPMC\n"); else board_nand_init(sdp_partition_info[2], nandcs); } -- cgit v0.10.2 From 57ed0e7b72e9b472c5ce862eaba5435b36233fab Mon Sep 17 00:00:00 2001 From: Francisco Alecrim Date: Wed, 17 Mar 2010 19:46:42 +0000 Subject: n8x0_defconfig: remove CONFIG_NILFS2_FS override arch/arm/configs/n8x0_defconfig:1061:warning: override: reassigning to symbol NILFS2_FS Signed-off-by: Francisco Alecrim Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig index 216ad00..9405e32 100644 --- a/arch/arm/configs/n8x0_defconfig +++ b/arch/arm/configs/n8x0_defconfig @@ -1058,7 +1058,6 @@ CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set -- cgit v0.10.2 From 6057db52a2c85659821feac4d3a86ada711893a4 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:10 +0000 Subject: omap: Devkit8000: Fix typo in supplies Replace wrong vdss_dsi with vdds_dsi. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index db4c093..b82e438 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -303,7 +303,7 @@ static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = { .dev = &devkit8000_lcd_device.dev, }, { - .supply = "vdss_dsi", + .supply = "vdds_dsi", .dev = &devkit8000_dss_device.dev, } }; -- cgit v0.10.2 From 51824c5f5ecf6175c1cc913cb5c7d6d6213e96aa Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:11 +0000 Subject: omap: Devkit8000: Add missing package selection Devkit8000 uses the CUS package for OMAP3530. This patch adds missing package selection for CUS and enables CONFIG_MUX. Replace whitespace with tab in Kconfig. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a8a3d1e..2455dcc 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -59,8 +59,10 @@ config MACH_OMAP3_BEAGLE select OMAP_PACKAGE_CBB config MACH_DEVKIT8000 - bool "DEVKIT8000 board" - depends on ARCH_OMAP3 + bool "DEVKIT8000 board" + depends on ARCH_OMAP3 + select OMAP_PACKAGE_CUS + select OMAP_MUX config MACH_OMAP_LDP bool "OMAP3 LDP board" -- cgit v0.10.2 From 3cdc6ee54a491003b583b47a56c4052c76c965e6 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:12 +0000 Subject: omap: Devkit8000: Fix typo in pin name Replace wrong sdr_cke[01] with sdrc_cke[01]. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index b82e438..3fafef4 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -676,8 +676,8 @@ static void __init devkit8000_init(void) devkit8000_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init devkit8000_map_io(void) -- cgit v0.10.2 From 184644a633d1b8cf5f2f7cf0debc4ee3917adc44 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:13 +0000 Subject: omap: Devkit8000: Remove unnecessary include file Remove include otg.h. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 3fafef4..d605e05 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -50,7 +50,6 @@ #include #include #include -#include #include #include -- cgit v0.10.2 From faec32e5bfe699e40adcf30df82ec1db8fe8e43b Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:14 +0000 Subject: omap: Devkit8000: Change position of init calls Change position of calling serial and ethernet initialization. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index d605e05..0b4abd4 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -649,6 +649,10 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { static void __init devkit8000_init(void) { + omap_serial_init(); + + omap_dm9000_init(); + devkit8000_i2c_init(); platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); @@ -658,10 +662,6 @@ static void __init devkit8000_init(void) spi_register_board_info(devkit8000_spi_board_info, ARRAY_SIZE(devkit8000_spi_board_info)); - omap_serial_init(); - - omap_dm9000_init(); - devkit8000_ads7846_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); -- cgit v0.10.2 From cf25eb950d0d8ada0db33c1d99d61bce620c128f Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Wed, 24 Mar 2010 12:52:15 +0000 Subject: omap: Devkit8000: Remove unused pins Old code from original patch contains beagle board pins that are not available on the Devkit8000. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 0b4abd4..47e3af2 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -268,20 +268,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, devkit8000_vmmc1_supply.dev = mmc[0].dev; devkit8000_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); - - /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - return 0; } @@ -664,12 +650,6 @@ static void __init devkit8000_init(void) devkit8000_ads7846_init(); - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - - gpio_request(170, "DVI_nPD"); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(170, true); - usb_musb_init(&musb_board_data); usb_ehci_init(&ehci_pdata); devkit8000_flash_init(); -- cgit v0.10.2 From 223e632c7a26c0424d658c35ef8c5e06bc28bf96 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 22 Mar 2010 17:28:19 +0000 Subject: omap: delete unused bootloader tag variables They are not needed and add over 512 bytes to kernel data. Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 01cbb48..f12f0e3 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -44,9 +44,6 @@ #define NO_LENGTH_CHECK 0xffffffff -unsigned char omap_bootloader_tag[512]; -int omap_bootloader_tag_len; - struct omap_board_config_kernel *omap_board_config; int omap_board_config_size; -- cgit v0.10.2 From 3b1fd3e55a39824e68bc8dd055d14892476e3671 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 23 Apr 2010 07:12:35 +0000 Subject: fsl_pq_mdio: Fix kernel oops during OF address translation Old P1020RDB device trees were not specifing tbipa address for MDIO nodes, which is now causing this kernel oops: ... eth2: TX BD ring size for Q[6]: 256 eth2: TX BD ring size for Q[7]: 256 Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0015504 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0015504] memcpy+0x3c/0x9c LR [c000a9f8] __of_translate_address+0xfc/0x21c Call Trace: [df839e00] [c000a94c] __of_translate_address+0x50/0x21c (unreliable) [df839e50] [c01a33e8] get_gfar_tbipa+0xb0/0xe0 ... The old device trees are buggy, though having a dead ethernet is better than a dead kernel, so fix the issue by using of_iomap(). Also, a somewhat similar issue exist in the probe() routine, though there the oops is only a possibility. Nonetheless, fix it too. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c index d5160ed..3acac5f 100644 --- a/drivers/net/fsl_pq_mdio.c +++ b/drivers/net/fsl_pq_mdio.c @@ -205,8 +205,6 @@ static int fsl_pq_mdio_find_free(struct mii_bus *new_bus) static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np) { struct gfar __iomem *enet_regs; - u32 __iomem *ioremap_tbipa; - u64 addr, size; /* * This is mildly evil, but so is our hardware for doing this. @@ -220,9 +218,7 @@ static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct devi return &enet_regs->tbipa; } else if (of_device_is_compatible(np, "fsl,etsec2-mdio") || of_device_is_compatible(np, "fsl,etsec2-tbi")) { - addr = of_translate_address(np, of_get_address(np, 1, &size, NULL)); - ioremap_tbipa = ioremap(addr, size); - return ioremap_tbipa; + return of_iomap(np, 1); } else return NULL; } @@ -279,6 +275,7 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev, u32 __iomem *tbipa; struct mii_bus *new_bus; int tbiaddr = -1; + const u32 *addrp; u64 addr = 0, size = 0; int err = 0; @@ -297,8 +294,19 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev, new_bus->priv = priv; fsl_pq_mdio_bus_name(new_bus->id, np); + addrp = of_get_address(np, 0, &size, NULL); + if (!addrp) { + err = -EINVAL; + goto err_free_bus; + } + /* Set the PHY base address */ - addr = of_translate_address(np, of_get_address(np, 0, &size, NULL)); + addr = of_translate_address(np, addrp); + if (addr == OF_BAD_ADDR) { + err = -EINVAL; + goto err_free_bus; + } + map = ioremap(addr, size); if (!map) { err = -ENOMEM; -- cgit v0.10.2 From 7ce97d4f78b62e3af24cdd4df953d777e7efb2f6 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 23 Apr 2010 07:12:44 +0000 Subject: gianfar: Fix potential oops during OF address translation gianfar driver may pass NULL pointer to the of_translate_address(), which may lead to a kernel oops. Fix this by using of_iomap(), which is also much simpler and shorter. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 080d1ce..df49af3 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -549,12 +549,8 @@ static int gfar_parse_group(struct device_node *np, struct gfar_private *priv, const char *model) { u32 *queue_mask; - u64 addr, size; - - addr = of_translate_address(np, - of_get_address(np, 0, &size, NULL)); - priv->gfargrp[priv->num_grps].regs = ioremap(addr, size); + priv->gfargrp[priv->num_grps].regs = of_iomap(np, 0); if (!priv->gfargrp[priv->num_grps].regs) return -ENOMEM; -- cgit v0.10.2 From 7ce5a2b9bb2e92902230e3121d8c3047fab9cb47 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 23 Apr 2010 16:17:40 -0700 Subject: x86-64: Clear a 64-bit FS/GS base on fork if selector is nonzero When we do a thread switch, we clear the outgoing FS/GS base if the corresponding selector is nonzero. This is taken by __switch_to() as an entry invariant; it does not verify that it is true on entry. However, copy_thread() doesn't enforce this constraint, which can result in inconsistent results after fork(). Make copy_thread() match the behavior of __switch_to(). Reported-and-tested-by: Samuel Thibault Signed-off-by: H. Peter Anvin LKML-Reference: <4BD1E061.8030605@zytor.com> Cc: diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index dc9690b..17cb329 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -276,12 +276,12 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, set_tsk_thread_flag(p, TIF_FORK); - p->thread.fs = me->thread.fs; - p->thread.gs = me->thread.gs; p->thread.io_bitmap_ptr = NULL; savesegment(gs, p->thread.gsindex); + p->thread.gs = p->thread.gsindex ? 0 : me->thread.gs; savesegment(fs, p->thread.fsindex); + p->thread.fs = p->thread.fsindex ? 0 : me->thread.fs; savesegment(es, p->thread.es); savesegment(ds, p->thread.ds); -- cgit v0.10.2 From 7a0fc404ae663776e96db43879a0fa24fec1fa3a Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 13 Apr 2010 14:40:54 -0700 Subject: x86: Disable large pages on CPUs with Atom erratum AAE44 Atom erratum AAE44/AAF40/AAG38/AAH41: "If software clears the PS (page size) bit in a present PDE (page directory entry), that will cause linear addresses mapped through this PDE to use 4-KByte pages instead of using a large page after old TLB entries are invalidated. Due to this erratum, if a code fetch uses this PDE before the TLB entry for the large page is invalidated then it may fetch from a different physical address than specified by either the old large page translation or the new 4-KByte page translation. This erratum may also cause speculative code fetches from incorrect addresses." [http://download.intel.com/design/processor/specupdt/319536.pdf] Where as commit 211b3d03c7400f48a781977a50104c9d12f4e229 seems to workaround errata AAH41 (mixed 4K TLBs) it reduces the window of opportunity for the bug to occur and does not totally remove it. This patch disables mixed 4K/4MB page tables totally avoiding the page splitting and not tripping this processor issue. This is based on an original patch by Colin King. Originally-by: Colin Ian King Cc: Colin Ian King Cc: Ingo Molnar Signed-off-by: H. Peter Anvin LKML-Reference: <1269271251-19775-1-git-send-email-colin.king@canonical.com> Cc: diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 7e1cca1..1366c7c 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -47,6 +47,27 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) (c->x86 == 0x6 && c->x86_model >= 0x0e)) set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + /* + * Atom erratum AAE44/AAF40/AAG38/AAH41: + * + * A race condition between speculative fetches and invalidating + * a large page. This is worked around in microcode, but we + * need the microcode to have already been loaded... so if it is + * not, recommend a BIOS update and disable large pages. + */ + if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2) { + u32 ucode, junk; + + wrmsr(MSR_IA32_UCODE_REV, 0, 0); + sync_core(); + rdmsr(MSR_IA32_UCODE_REV, junk, ucode); + + if (ucode < 0x20e) { + printk(KERN_WARNING "Atom PSE erratum detected, BIOS microcode update recommended\n"); + clear_cpu_cap(c, X86_FEATURE_PSE); + } + } + #ifdef CONFIG_X86_64 set_cpu_cap(c, X86_FEATURE_SYSENTER32); #else -- cgit v0.10.2 From cac36f707119b792b2396aed371d6b5cdc194890 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 23 Apr 2010 13:17:37 -0400 Subject: reiserfs: fix permissions on .reiserfs_priv Commit 677c9b2e393a0cd203bd54e9c18b012b2c73305a ("reiserfs: remove privroot hiding in lookup") removed the magic from the lookup code to hide the .reiserfs_priv directory since it was getting loaded at mount-time instead. The intent was that the entry would be hidden from the user via a poisoned d_compare, but this was faulty. This introduced a security issue where unprivileged users could access and modify extended attributes or ACLs belonging to other users, including root. This patch resolves the issue by properly hiding .reiserfs_priv. This was the intent of the xattr poisoning code, but it appears to have never worked as expected. This is fixed by using d_revalidate instead of d_compare. This patch makes -oexpose_privroot a no-op. I'm fine leaving it this way. The effort involved in working out the corner cases wrt permissions and caching outweigh the benefit of the feature. Signed-off-by: Jeff Mahoney Acked-by: Edward Shishkin Reported-by: Matt McCutchen Tested-by: Matt McCutchen Cc: Frederic Weisbecker Cc: Al Viro Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c index f8a6075a..0793044 100644 --- a/fs/reiserfs/dir.c +++ b/fs/reiserfs/dir.c @@ -46,8 +46,6 @@ static inline bool is_privroot_deh(struct dentry *dir, struct reiserfs_de_head *deh) { struct dentry *privroot = REISERFS_SB(dir->d_sb)->priv_root; - if (reiserfs_expose_privroot(dir->d_sb)) - return 0; return (dir == dir->d_parent && privroot->d_inode && deh->deh_objectid == INODE_PKEY(privroot->d_inode)->k_objectid); } diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 4f9586b..28f0a44 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -973,21 +973,13 @@ int reiserfs_permission(struct inode *inode, int mask) return generic_permission(inode, mask, NULL); } -/* This will catch lookups from the fs root to .reiserfs_priv */ -static int -xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name) +static int xattr_hide_revalidate(struct dentry *dentry, struct nameidata *nd) { - struct dentry *priv_root = REISERFS_SB(dentry->d_sb)->priv_root; - if (container_of(q1, struct dentry, d_name) == priv_root) - return -ENOENT; - if (q1->len == name->len && - !memcmp(q1->name, name->name, name->len)) - return 0; - return 1; + return -EPERM; } static const struct dentry_operations xattr_lookup_poison_ops = { - .d_compare = xattr_lookup_poison, + .d_revalidate = xattr_hide_revalidate, }; int reiserfs_lookup_privroot(struct super_block *s) @@ -1001,8 +993,7 @@ int reiserfs_lookup_privroot(struct super_block *s) strlen(PRIVROOT_NAME)); if (!IS_ERR(dentry)) { REISERFS_SB(s)->priv_root = dentry; - if (!reiserfs_expose_privroot(s)) - s->s_root->d_op = &xattr_lookup_poison_ops; + dentry->d_op = &xattr_lookup_poison_ops; if (dentry->d_inode) dentry->d_inode->i_flags |= S_PRIVATE; } else -- cgit v0.10.2 From 93d5c9be1ddd57d4063ce463c9ac2be1e5ee14f1 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 23 Apr 2010 13:17:39 -0400 Subject: memcg: fix prepare migration If a signal is pending (task being killed by sigkill) __mem_cgroup_try_charge will write NULL into &mem, and css_put will oops on null pointer dereference. BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [] mem_cgroup_prepare_migration+0x7c/0xc0 PGD a5d89067 PUD a5d8a067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/platform/microcode/firmware/microcode/loading CPU 0 Modules linked in: nfs lockd nfs_acl auth_rpcgss sunrpc acpi_cpufreq pcspkr sg [last unloaded: microcode] Pid: 5299, comm: largepages Tainted: G W 2.6.34-rc3 #3 Penryn1600SLI-110dB/To Be Filled By O.E.M. RIP: 0010:[] [] mem_cgroup_prepare_migration+0x7c/0xc0 [nishimura@mxp.nes.nec.co.jp: fix merge issues] Signed-off-by: Andrea Arcangeli Acked-by: KAMEZAWA Hiroyuki Cc: Balbir Singh Signed-off-by: Daisuke Nishimura Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memcontrol.c b/mm/memcontrol.c index f4ede99..6c755de 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -2429,11 +2429,11 @@ int mem_cgroup_prepare_migration(struct page *page, struct mem_cgroup **ptr) } unlock_page_cgroup(pc); + *ptr = mem; if (mem) { - ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, &mem, false); + ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, ptr, false); css_put(&mem->css); } - *ptr = mem; return ret; } -- cgit v0.10.2 From fb2162df74bb19552db3d988fd11c787cf5fad56 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 23 Apr 2010 13:17:41 -0400 Subject: reiserfs: fix corruption during shrinking of xattrs Commit 48b32a3553a54740d236b79a90f20147a25875e3 ("reiserfs: use generic xattr handlers") introduced a problem that causes corruption when extended attributes are replaced with a smaller value. The issue is that the reiserfs_setattr to shrink the xattr file was moved from before the write to after the write. The root issue has always been in the reiserfs xattr code, but was papered over by the fact that in the shrink case, the file would just be expanded again while the xattr was written. The end result is that the last 8 bytes of xattr data are lost. This patch fixes it to use new_size. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=14826 Signed-off-by: Jeff Mahoney Reported-by: Christian Kujau Tested-by: Christian Kujau Cc: Edward Shishkin Cc: Jethro Beekman Cc: Greg Surbey Cc: Marco Gatti Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 28f0a44..e7cc00e 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -554,7 +554,7 @@ reiserfs_xattr_set_handle(struct reiserfs_transaction_handle *th, if (!err && new_size < i_size_read(dentry->d_inode)) { struct iattr newattrs = { .ia_ctime = current_fs_time(inode->i_sb), - .ia_size = buffer_size, + .ia_size = new_size, .ia_valid = ATTR_SIZE | ATTR_CTIME, }; -- cgit v0.10.2 From 46da27664887fb95cedba53eafcf876de812c8c1 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Fri, 23 Apr 2010 13:17:44 -0400 Subject: kernel/sys.c: fix compat uname machine On ppc64 you get this error: $ setarch ppc -R true setarch: ppc: Unrecognized architecture because uname still reports ppc64 as the machine. So mask off the personality flags when checking for PER_LINUX32. Signed-off-by: Andreas Schwab Reviewed-by: Christoph Hellwig Acked-by: David S. Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/sys.c b/kernel/sys.c index 6d1a7e0..7cb426a 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -1118,7 +1118,7 @@ DECLARE_RWSEM(uts_sem); #ifdef COMPAT_UTS_MACHINE #define override_architecture(name) \ - (current->personality == PER_LINUX32 && \ + (personality(current->personality) == PER_LINUX32 && \ copy_to_user(name->machine, COMPAT_UTS_MACHINE, \ sizeof(COMPAT_UTS_MACHINE))) #else -- cgit v0.10.2 From e59464c735db19619cde2aa331609adb02005f5b Mon Sep 17 00:00:00 2001 From: Changli Gao Date: Fri, 23 Apr 2010 13:17:45 -0400 Subject: flex_array: fix the panic when calling flex_array_alloc() without __GFP_ZERO memset() is called with the wrong address and the kernel panics. Signed-off-by: Changli Gao Cc: Patrick McHardy Acked-by: David Rientjes Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/lib/flex_array.c b/lib/flex_array.c index 66eef2e..41b1804 100644 --- a/lib/flex_array.c +++ b/lib/flex_array.c @@ -99,7 +99,7 @@ struct flex_array *flex_array_alloc(int element_size, unsigned int total, ret->element_size = element_size; ret->total_nr_elements = total; if (elements_fit_in_base(ret) && !(flags & __GFP_ZERO)) - memset(ret->parts[0], FLEX_ARRAY_FREE, + memset(&ret->parts[0], FLEX_ARRAY_FREE, FLEX_ARRAY_BASE_BYTES_LEFT); return ret; } -- cgit v0.10.2 From a88a2b886404b1cfc109125b1cba4775e8682955 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Fri, 23 Apr 2010 13:17:47 -0400 Subject: mtd: fix Orion NAND driver compilation with ARM OABI We must tell GCC to use even register for variable passed to ldrd instruction. Without this patch GCC 4.2.1 puts this variable to r2/r3 on EABI and r3/r4 on OABI, so force it to r2/r3. This does not change anything when EABI and OABI compilation works OK. Without this patch and with OABI I get: CC drivers/mtd/nand/orion_nand.o /tmp/ccMkwOCs.s: Assembler messages: /tmp/ccMkwOCs.s:63: Error: first destination register must be even -- `ldrd r3,[ip]' make[5]: *** [drivers/mtd/nand/orion_nand.o] Error 1 Signed-off-by: Paulius Zaleckas Acked-by: Nicolas Pitre Acked-by: Artem Bityutskiy Cc: David Woodhouse Cc: Jamie Lokier Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index f59c074..d60fc57 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -60,7 +60,13 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) } buf64 = (uint64_t *)buf; while (i < len/8) { - uint64_t x; + /* + * Since GCC has no proper constraint (PR 43518) + * force x variable to r2/r3 registers as ldrd instruction + * requires first register to be even. + */ + register uint64_t x asm ("r2"); + asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base)); buf64[i++] = x; } -- cgit v0.10.2 From 9bd14a839d2ec703c56593a7209f2310c16d6478 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 23 Apr 2010 13:17:48 -0400 Subject: lis3: add support for HP ProBook 432x/442x/452x/522x Correct axis-mappings for new HP ProBook laptops. Signed-off-by: Takashi Iwai Acked-by: Eric Piel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index be475e8..c8ab505 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -217,6 +217,10 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { AXIS_DMI_MATCH("DV7", "HP Pavilion dv7", x_inverted), AXIS_DMI_MATCH("HP8710", "HP Compaq 8710", y_inverted), AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted), + AXIS_DMI_MATCH("HPB432x", "HP ProBook 432", xy_rotated_left), + AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left), + AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted), + AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap), { NULL, } /* Laptop models without axis info (yet): * "NC6910" "HP Compaq 6910" -- cgit v0.10.2 From 8a3bdfe6cd841880a5d849c40f90093b3817f6e0 Mon Sep 17 00:00:00 2001 From: Thomas Gerlach Date: Fri, 23 Apr 2010 13:17:50 -0400 Subject: drivers/video/efifb.c: support framebuffer for NVIDIA 9400M in MacBook Pro 5,1 Description of patch: --------------------- This is a patch for the EFI framebuffer driver to enable the framebuffer of the NVIDIA 9400M as found in MacBook Pro (MBP) 5,1 and up. The framebuffer of the NVIDIA graphic cards are located at the following addresses in memory: 9400M: 0xC0010000 9600M GT: 0xB0030000 The patch delivered right here only provides the memory location of the framebuffer of the 9400M device. The 9600M GT is not covered. It is assumed that the 9400M is used when powered up the MBP. The information which device is currently powered and in use is stored in the 64 bytes large EFI variable "gpu-power-prefs". More specifically, byte 0x3B indicates whether 9600M GT (0x00) or 9400M (0x01) is online. The PCI bus IDs are the following: 9400M: PCI 03:00:00 9600M GT: PCI 02:00:00 The EFI variables can be easily read-out and manipulated with "rEFIt", an MBP specific bootloader tool. For more information on how handle rEFIt and EFI variables please consult "http://refit.sourceforge.net" and "http://ubuntuforums.org/archive/index.php/t-1076879.html". IMPORTANT NOTE: The information on how to activate the 9400M device given at "ubuntuforums.org" is not correct, since it states gpu-power-prefs[0x3B] = 0x00 -> 9400M (PCI 02:00:00) gpu-power-prefs[0x3B] = 0x01 -> 9600M GT (PCI 03:00:00) Actually, the assignment of the values and the PCI bus IDs are swapped. Suggestions: ------------ To cover framebuffers of both 9400M and 9600M GT, I would suggest to implement a conditional on "gpu-power-prefs". Depending on the value of byte 0x3B, the according framebuffer is selected. However, this requires kernel access to the EFI variables. [akpm@linux-foundation.org: rename optname, per Peter Jones] Signed-off-by: Thomas Gerlach Acked-by: Peter Jones Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c index 581d2db..ecf4055 100644 --- a/drivers/video/efifb.c +++ b/drivers/video/efifb.c @@ -49,6 +49,7 @@ enum { M_MBP_2, /* MacBook Pro 2nd gen */ M_MBP_SR, /* MacBook Pro (Santa Rosa) */ M_MBP_4, /* MacBook Pro, 4th gen */ + M_MBP_5_1, /* MacBook Pro, 5,1th gen */ M_UNKNOWN /* placeholder */ }; @@ -70,6 +71,7 @@ static struct efifb_dmi_info { [M_MBP_2] = { "mbp2", 0, 0, 0, 0 }, /* placeholder */ [M_MBP_SR] = { "mbp3", 0x80030000, 2048 * 4, 1440, 900 }, [M_MBP_4] = { "mbp4", 0xc0060000, 2048 * 4, 1920, 1200 }, + [M_MBP_5_1] = { "mbp51", 0xc0010000, 2048 * 4, 1440, 900 }, [M_UNKNOWN] = { NULL, 0, 0, 0, 0 } }; @@ -106,6 +108,7 @@ static struct dmi_system_id __initdata dmi_system_table[] = { EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro3,1", M_MBP_SR), EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro3,1", M_MBP_SR), EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro4,1", M_MBP_4), + EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,1", M_MBP_5_1), {}, }; -- cgit v0.10.2 From 7716fa66034c408b0f59e8b9c62f793befa5b338 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Fri, 23 Apr 2010 13:17:51 -0400 Subject: cgroups: fix procs documentation Writing to cgroup.procs is not supported now. Signed-off-by: KAMEZAWA Hiroyuki Acked-by: Li Zefan Cc: Ben Blum Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index fd588ff0..a1ca592 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -235,8 +235,7 @@ containing the following files describing that cgroup: - cgroup.procs: list of tgids in the cgroup. This list is not guaranteed to be sorted or free of duplicate tgids, and userspace should sort/uniquify the list if this property is required. - Writing a tgid into this file moves all threads with that tgid into - this cgroup. + This is a read-only file, for now. - notify_on_release flag: run the release agent on exit? - release_agent: the path to use for release notifications (this file exists in the top cgroup only) -- cgit v0.10.2 From 9a6a1ecd9e9b5d046a236da2f7eb6b6812f04229 Mon Sep 17 00:00:00 2001 From: Ian Dall Date: Fri, 23 Apr 2010 13:17:53 -0400 Subject: w1: w1 temp: fix negative termperature calculation Fix regression caused by commit 507e2fbaaacb6f164b4125b87c5002f95143174b ("w1: w1 temp calculation overflow fix") whereby negative temperatures for the DS18B20 are not converted properly. When the temperature exceeds 32767 milli-degrees the temperature overflows to -32768 millidegrees. These are both well within the -55 - +125 degree range for the sensor. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=12646 Signed-of-by: Ian Dall Cc: Evgeniy Polyakov Tested-by: Karsten Elfenbein Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index 1ed3d55..17726a0 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -115,9 +115,8 @@ static struct w1_therm_family_converter w1_therm_families[] = { static inline int w1_DS18B20_convert_temp(u8 rom[9]) { - int t = ((s16)rom[1] << 8) | rom[0]; - t = t*1000/16; - return t; + s16 t = le16_to_cpup((__le16 *)rom); + return t*1000/16; } static inline int w1_DS18S20_convert_temp(u8 rom[9]) -- cgit v0.10.2 From 23be7468e8802a2ac1de6ee3eecb3ec7f14dc703 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 23 Apr 2010 13:17:56 -0400 Subject: hugetlb: fix infinite loop in get_futex_key() when backed by huge pages If a futex key happens to be located within a huge page mapped MAP_PRIVATE, get_futex_key() can go into an infinite loop waiting for a page->mapping that will never exist. See https://bugzilla.redhat.com/show_bug.cgi?id=552257 for more details about the problem. This patch makes page->mapping a poisoned value that includes PAGE_MAPPING_ANON mapped MAP_PRIVATE. This is enough for futex to continue but because of PAGE_MAPPING_ANON, the poisoned value is not dereferenced or used by futex. No other part of the VM should be dereferencing the page->mapping of a hugetlbfs page as its page cache is not on the LRU. This patch fixes the problem with the test case described in the bugzilla. [akpm@linux-foundation.org: mel cant spel] Signed-off-by: Mel Gorman Acked-by: Peter Zijlstra Acked-by: Darren Hart Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/poison.h b/include/linux/poison.h index 2110a81..34066ff 100644 --- a/include/linux/poison.h +++ b/include/linux/poison.h @@ -48,6 +48,15 @@ #define POISON_FREE 0x6b /* for use-after-free poisoning */ #define POISON_END 0xa5 /* end-byte of poisoning */ +/********** mm/hugetlb.c **********/ +/* + * Private mappings of hugetlb pages use this poisoned value for + * page->mapping. The core VM should not be doing anything with this mapping + * but futex requires the existence of some page->mapping value even though it + * is unused if PAGE_MAPPING_ANON is set. + */ +#define HUGETLB_POISON ((void *)(0x00300300 + POISON_POINTER_DELTA + PAGE_MAPPING_ANON)) + /********** arch/$ARCH/mm/init.c **********/ #define POISON_FREE_INITMEM 0xcc diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 6034dc9..ffbdfc8 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -546,6 +546,7 @@ static void free_huge_page(struct page *page) mapping = (struct address_space *) page_private(page); set_page_private(page, 0); + page->mapping = NULL; BUG_ON(page_count(page)); INIT_LIST_HEAD(&page->lru); @@ -2447,8 +2448,10 @@ retry: spin_lock(&inode->i_lock); inode->i_blocks += blocks_per_huge_page(h); spin_unlock(&inode->i_lock); - } else + } else { lock_page(page); + page->mapping = HUGETLB_POISON; + } } /* -- cgit v0.10.2 From ccdb40048b2972f10bdc944913c0e0ee26b5d1f2 Mon Sep 17 00:00:00 2001 From: Albin Tonnerre Date: Fri, 23 Apr 2010 13:17:58 -0400 Subject: lib: fix the use of LZO to decompress initramfs images This patch fixes 2 issues with the LZO decompressor: - It doesn't handle the case where a block isn't compressed at all. In this case, calling lzo1x_decompress_safe will fail, so we need to just use memcpy() instead (the upstream LZO code does something similar) - Since commit 54291362d2a5738e1b0495df2abcb9e6b0563a3f ("initramfs: add missing decompressor error check") , the decompressor return code is checked in the init/initramfs.c The LZO decompressor didn't return the expected value, causing the initramfs code to falsely believe a decompression error occured Signed-off-by: Albin Tonnerre Tested-by: bert schulze Cc: "H. Peter Anvin" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/lib/decompress_unlzo.c b/lib/decompress_unlzo.c index db521f4..bcb3a4b 100644 --- a/lib/decompress_unlzo.c +++ b/lib/decompress_unlzo.c @@ -97,7 +97,7 @@ STATIC inline int INIT unlzo(u8 *input, int in_len, u32 src_len, dst_len; size_t tmp; u8 *in_buf, *in_buf_save, *out_buf; - int obytes_processed = 0; + int ret = -1; set_error_fn(error_fn); @@ -174,15 +174,22 @@ STATIC inline int INIT unlzo(u8 *input, int in_len, /* decompress */ tmp = dst_len; - r = lzo1x_decompress_safe((u8 *) in_buf, src_len, + + /* When the input data is not compressed at all, + * lzo1x_decompress_safe will fail, so call memcpy() + * instead */ + if (unlikely(dst_len == src_len)) + memcpy(out_buf, in_buf, src_len); + else { + r = lzo1x_decompress_safe((u8 *) in_buf, src_len, out_buf, &tmp); - if (r != LZO_E_OK || dst_len != tmp) { - error("Compressed data violation"); - goto exit_2; + if (r != LZO_E_OK || dst_len != tmp) { + error("Compressed data violation"); + goto exit_2; + } } - obytes_processed += dst_len; if (flush) flush(out_buf, dst_len); if (output) @@ -196,6 +203,7 @@ STATIC inline int INIT unlzo(u8 *input, int in_len, in_buf += src_len; } + ret = 0; exit_2: if (!input) free(in_buf); @@ -203,7 +211,7 @@ exit_1: if (!output) free(out_buf); exit: - return obytes_processed; + return ret; } #define decompress unlzo -- cgit v0.10.2 From 93b4a44f3ad69520d605aace3f3486b8eb754b96 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 23 Apr 2010 13:18:00 -0400 Subject: keys: fix an RCU warning Fix the following RCU warning: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- security/keys/request_key.c:116 invoked rcu_dereference_check() without protection! This was caused by doing: [root@andromeda ~]# keyctl newring fred @s 539196288 [root@andromeda ~]# keyctl request2 user a a 539196288 request_key: Required key not available Signed-off-by: David Howells Acked-by: Eric Dumazet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/keys/request_key.c b/security/keys/request_key.c index 03fe63e..ea97c31 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -68,7 +68,8 @@ static int call_sbin_request_key(struct key_construction *cons, { const struct cred *cred = current_cred(); key_serial_t prkey, sskey; - struct key *key = cons->key, *authkey = cons->authkey, *keyring; + struct key *key = cons->key, *authkey = cons->authkey, *keyring, + *session; char *argv[9], *envp[3], uid_str[12], gid_str[12]; char key_str[12], keyring_str[3][12]; char desc[20]; @@ -112,10 +113,12 @@ static int call_sbin_request_key(struct key_construction *cons, if (cred->tgcred->process_keyring) prkey = cred->tgcred->process_keyring->serial; - if (cred->tgcred->session_keyring) - sskey = rcu_dereference(cred->tgcred->session_keyring)->serial; - else - sskey = cred->user->session_keyring->serial; + rcu_read_lock(); + session = rcu_dereference(cred->tgcred->session_keyring); + if (!session) + session = cred->user->session_keyring; + sskey = session->serial; + rcu_read_unlock(); sprintf(keyring_str[2], "%d", sskey); -- cgit v0.10.2 From 31f2b0ebc01fd332cb0997f7ce9f9cde29af9e20 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 23 Apr 2010 13:18:01 -0400 Subject: rmap: anon_vma_prepare() can leak anon_vma_chain If find_mergeable_anon_vma() succeeds but another thread installs ->anon_vma before we take ptl, then allocated == NULL but avc should be freed. Change the code to check avc != NULL to detect this case. Also, a couple of whitespace changes to make the critical section more visible. Signed-off-by: Oleg Nesterov Reviewed-by: Rik van Riel Cc: Hugh Dickins Cc: Pete Zaitcev Cc: Borislav Petkov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/rmap.c b/mm/rmap.c index 526704e..07fc947 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -133,8 +133,8 @@ int anon_vma_prepare(struct vm_area_struct *vma) goto out_enomem_free_avc; allocated = anon_vma; } - spin_lock(&anon_vma->lock); + spin_lock(&anon_vma->lock); /* page_table_lock to protect against threads */ spin_lock(&mm->page_table_lock); if (likely(!vma->anon_vma)) { @@ -144,14 +144,15 @@ int anon_vma_prepare(struct vm_area_struct *vma) list_add(&avc->same_vma, &vma->anon_vma_chain); list_add(&avc->same_anon_vma, &anon_vma->head); allocated = NULL; + avc = NULL; } spin_unlock(&mm->page_table_lock); - spin_unlock(&anon_vma->lock); - if (unlikely(allocated)) { + + if (unlikely(allocated)) anon_vma_free(allocated); + if (unlikely(avc)) anon_vma_chain_free(avc); - } } return 0; -- cgit v0.10.2 From 81fa08f25bd24fc51557a2d2364fa1ab5e7407b4 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 23 Apr 2010 13:18:03 -0400 Subject: w1: fix omap 1-wire driver compilation Fixes the following error: drivers/w1/masters/omap_hdq.c: In function 'hdq_wait_for_flag': drivers/w1/masters/omap_hdq.c:137: error: implicit declaration of function 'schedule_timeout_uninterruptible' drivers/w1/masters/omap_hdq.c: In function 'hdq_write_byte': drivers/w1/masters/omap_hdq.c:177: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function) drivers/w1/masters/omap_hdq.c:177: error: (Each undeclared identifier is reported only once drivers/w1/masters/omap_hdq.c:177: error: for each function it appears in.) drivers/w1/masters/omap_hdq.c:177: error: implicit declaration of function 'schedule_timeout' drivers/w1/masters/omap_hdq.c: In function 'hdq_isr': drivers/w1/masters/omap_hdq.c:221: error: 'TASK_NORMAL' undeclared (first use in this function) drivers/w1/masters/omap_hdq.c: In function 'omap_hdq_break': drivers/w1/masters/omap_hdq.c:316: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function) Signed-off-by: Amit Kucheria Acked-by: Tony Lindgren Cc: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c index ef36fca..3a7e9ff 100644 --- a/drivers/w1/masters/omap_hdq.c +++ b/drivers/w1/masters/omap_hdq.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From 98d5ce0d0044666fc85a01915a1d22407eb546fd Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 23 Apr 2010 13:18:04 -0400 Subject: lib/vsprintf.c: add missing EXPORT_SYMBOL(simple_strtoll) Add a missing EXPORT_SYMBOL. I must be the first person that wants to use this function :-) Signed-off-by: Hans Verkuil Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/lib/vsprintf.c b/lib/vsprintf.c index 7376b7c..46d34b0 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -118,6 +118,7 @@ long long simple_strtoll(const char *cp, char **endp, unsigned int base) return simple_strtoull(cp, endp, base); } +EXPORT_SYMBOL(simple_strtoll); /** * strict_strtoul - convert a string to an unsigned long strictly -- cgit v0.10.2 From b8af67e2681c693a21f3933e3bdfce4cf66596d3 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 23 Apr 2010 13:18:06 -0400 Subject: fs/block_dev.c: fix performance regression in O_DIRECT|O_SYNC writes to block devices We are seeing a large regression in database performance on recent kernels. The database opens a block device with O_DIRECT|O_SYNC and a number of threads write to different regions of the file at the same time. A simple test case is below. I haven't defined DEVICE since getting it wrong will destroy your data :) On an 3 disk LVM with a 64k chunk size we see about 17MB/sec and only a few threads in IO wait: procs -----io---- -system-- -----cpu------ r b bi bo in cs us sy id wa st 0 3 0 16170 656 2259 0 0 86 14 0 0 2 0 16704 695 2408 0 0 92 8 0 0 2 0 17308 744 2653 0 0 86 14 0 0 2 0 17933 759 2777 0 0 89 10 0 Most threads are blocking in vfs_fsync_range, which has: mutex_lock(&mapping->host->i_mutex); err = fop->fsync(file, dentry, datasync); if (!ret) ret = err; mutex_unlock(&mapping->host->i_mutex); commit 148f948ba877f4d3cdef036b1ff6d9f68986706a (vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode) offers some explanation of what is going on: Use these new helpers for syncing from generic VFS functions. This makes O_SYNC writes to block devices acquire i_mutex for syncing. If we really care about this, we can make block_fsync() drop the i_mutex and reacquire it before it returns. Thanks Jan for such a good commit message! As well as dropping i_mutex, Christoph suggests we should remove the call to sync_blockdev(): > sync_blockdev is an overcomplicated alias for filemap_write_and_wait on > the block device inode, which is exactly what we did just before calling > into ->fsync The patch below incorporates both suggestions. With it the testcase improves from 17MB/s to 68M/sec: procs -----io---- -system-- -----cpu------ r b bi bo in cs us sy id wa st 0 7 0 65536 1000 3878 0 0 70 30 0 0 34 0 69632 1016 3921 0 1 46 53 0 0 57 0 69632 1000 3921 0 0 55 45 0 0 53 0 69640 754 4111 0 0 81 19 0 Testcase: #define _GNU_SOURCE #include #include #include #include #include #include #include #include #define NR_THREADS 64 #define BUFSIZE (64 * 1024) #define DEVICE "/dev/mapper/XXXXXX" #define ALIGN(VAL, SIZE) (((VAL)+(SIZE)-1) & ~((SIZE)-1)) static int fd; static void *doit(void *arg) { unsigned long offset = (long)arg; char *b, *buf; b = malloc(BUFSIZE + 1024); buf = (char *)ALIGN((unsigned long)b, 1024); memset(buf, 0, BUFSIZE); while (1) pwrite(fd, buf, BUFSIZE, offset); } int main(int argc, char *argv[]) { int flags = O_RDWR|O_DIRECT; int i; unsigned long offset = 0; if (argc > 1 && !strcmp(argv[1], "O_SYNC")) flags |= O_SYNC; fd = open(DEVICE, flags); if (fd == -1) { perror("open"); exit(1); } for (i = 0; i < NR_THREADS-1; i++) { pthread_t tid; pthread_create(&tid, NULL, doit, (void *)offset); offset += BUFSIZE; } doit((void *)offset); return 0; } Signed-off-by: Anton Blanchard Acked-by: Jan Kara Cc: Christoph Hellwig Cc: Alexander Viro Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/block_dev.c b/fs/block_dev.c index 2a6d019..6dcee88 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -406,16 +406,23 @@ static loff_t block_llseek(struct file *file, loff_t offset, int origin) int blkdev_fsync(struct file *filp, struct dentry *dentry, int datasync) { - struct block_device *bdev = I_BDEV(filp->f_mapping->host); + struct inode *bd_inode = filp->f_mapping->host; + struct block_device *bdev = I_BDEV(bd_inode); int error; - error = sync_blockdev(bdev); - if (error) - return error; - + /* + * There is no need to serialise calls to blkdev_issue_flush with + * i_mutex and doing so causes performance issues with concurrent + * O_SYNC writers to a block device. + */ + mutex_unlock(&bd_inode->i_mutex); + error = blkdev_issue_flush(bdev, NULL); if (error == -EOPNOTSUPP) error = 0; + + mutex_lock(&bd_inode->i_mutex); + return error; } EXPORT_SYMBOL(blkdev_fsync); -- cgit v0.10.2 From 453dc65931915abc61f92e12bba1fc4747ff5542 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 23 Apr 2010 13:18:08 -0400 Subject: VMware Balloon driver This is a standalone version of VMware Balloon driver. Ballooning is a technique that allows hypervisor dynamically limit the amount of memory available to the guest (with guest cooperation). In the overcommit scenario, when hypervisor set detects that it needs to shuffle some memory, it instructs the driver to allocate certain number of pages, and the underlying memory gets returned to the hypervisor. Later hypervisor may return memory to the guest by reattaching memory to the pageframes and instructing the driver to "deflate" balloon. We are submitting a standalone driver because KVM maintainer (Avi Kivity) expressed opinion (rightly) that our transport does not fit well into virtqueue paradigm and thus it does not make much sense to integrate with virtio. There were also some concerns whether current ballooning technique is the right thing. If there appears a better framework to achieve this we are prepared to evaluate and switch to using it, but in the meantime we'd like to get this driver upstream. We want to get the driver accepted in distributions so that users do not have to deal with an out-of-tree module and many distributions have "upstream first" requirement. The driver has been shipping for a number of years and users running on VMware platform will have it installed as part of VMware Tools even if it will not come from a distribution, thus there should not be additional risk in pulling the driver into mainline. The driver will only activate if host is VMware so everyone else should not be affected at all. Signed-off-by: Dmitry Torokhov Cc: Avi Kivity Cc: Jeremy Fitzhardinge Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c index 1cbed97..dfdb4db 100644 --- a/arch/x86/kernel/cpu/vmware.c +++ b/arch/x86/kernel/cpu/vmware.c @@ -22,6 +22,7 @@ */ #include +#include #include #include #include @@ -101,6 +102,7 @@ int vmware_platform(void) return 0; } +EXPORT_SYMBOL(vmware_platform); /* * VMware hypervisor takes care of exporting a reliable TSC to the guest. diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 2191c8d..0d0d625 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -311,6 +311,22 @@ config TI_DAC7512 This driver can also be built as a module. If so, the module will be calles ti_dac7512. +config VMWARE_BALLOON + tristate "VMware Balloon Driver" + depends on X86 + help + This is VMware physical memory management driver which acts + like a "balloon" that can be inflated to reclaim physical pages + by reserving them in the guest and invalidating them in the + monitor, freeing up the underlying machine pages so they can + be allocated to other guests. The balloon can also be deflated + to allow the guest to use more physical memory. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called vmware_balloon. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 27c4843..7b6f7ee 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -29,3 +29,4 @@ obj-$(CONFIG_C2PORT) += c2port/ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/ obj-y += eeprom/ obj-y += cb710/ +obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o diff --git a/drivers/misc/vmware_balloon.c b/drivers/misc/vmware_balloon.c new file mode 100644 index 0000000..e7161c4 --- /dev/null +++ b/drivers/misc/vmware_balloon.c @@ -0,0 +1,832 @@ +/* + * VMware Balloon driver. + * + * Copyright (C) 2000-2010, VMware, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained by: Dmitry Torokhov + */ + +/* + * This is VMware physical memory management driver for Linux. The driver + * acts like a "balloon" that can be inflated to reclaim physical pages by + * reserving them in the guest and invalidating them in the monitor, + * freeing up the underlying machine pages so they can be allocated to + * other guests. The balloon can also be deflated to allow the guest to + * use more physical memory. Higher level policies can control the sizes + * of balloons in VMs in order to manage physical memory resources. + */ + +//#define DEBUG +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("VMware, Inc."); +MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver"); +MODULE_VERSION("1.2.1.0-K"); +MODULE_ALIAS("dmi:*:svnVMware*:*"); +MODULE_ALIAS("vmware_vmmemctl"); +MODULE_LICENSE("GPL"); + +/* + * Various constants controlling rate of inflaint/deflating balloon, + * measured in pages. + */ + +/* + * Rate of allocating memory when there is no memory pressure + * (driver performs non-sleeping allocations). + */ +#define VMW_BALLOON_NOSLEEP_ALLOC_MAX 16384U + +/* + * Rates of memory allocaton when guest experiences memory pressure + * (driver performs sleeping allocations). + */ +#define VMW_BALLOON_RATE_ALLOC_MIN 512U +#define VMW_BALLOON_RATE_ALLOC_MAX 2048U +#define VMW_BALLOON_RATE_ALLOC_INC 16U + +/* + * Rates for releasing pages while deflating balloon. + */ +#define VMW_BALLOON_RATE_FREE_MIN 512U +#define VMW_BALLOON_RATE_FREE_MAX 16384U +#define VMW_BALLOON_RATE_FREE_INC 16U + +/* + * When guest is under memory pressure, use a reduced page allocation + * rate for next several cycles. + */ +#define VMW_BALLOON_SLOW_CYCLES 4 + +/* + * Use __GFP_HIGHMEM to allow pages from HIGHMEM zone. We don't + * allow wait (__GFP_WAIT) for NOSLEEP page allocations. Use + * __GFP_NOWARN, to suppress page allocation failure warnings. + */ +#define VMW_PAGE_ALLOC_NOSLEEP (__GFP_HIGHMEM|__GFP_NOWARN) + +/* + * Use GFP_HIGHUSER when executing in a separate kernel thread + * context and allocation can sleep. This is less stressful to + * the guest memory system, since it allows the thread to block + * while memory is reclaimed, and won't take pages from emergency + * low-memory pools. + */ +#define VMW_PAGE_ALLOC_CANSLEEP (GFP_HIGHUSER) + +/* Maximum number of page allocations without yielding processor */ +#define VMW_BALLOON_YIELD_THRESHOLD 1024 + + +/* + * Hypervisor communication port definitions. + */ +#define VMW_BALLOON_HV_PORT 0x5670 +#define VMW_BALLOON_HV_MAGIC 0x456c6d6f +#define VMW_BALLOON_PROTOCOL_VERSION 2 +#define VMW_BALLOON_GUEST_ID 1 /* Linux */ + +#define VMW_BALLOON_CMD_START 0 +#define VMW_BALLOON_CMD_GET_TARGET 1 +#define VMW_BALLOON_CMD_LOCK 2 +#define VMW_BALLOON_CMD_UNLOCK 3 +#define VMW_BALLOON_CMD_GUEST_ID 4 + +/* error codes */ +#define VMW_BALLOON_SUCCESS 0 +#define VMW_BALLOON_FAILURE -1 +#define VMW_BALLOON_ERROR_CMD_INVALID 1 +#define VMW_BALLOON_ERROR_PPN_INVALID 2 +#define VMW_BALLOON_ERROR_PPN_LOCKED 3 +#define VMW_BALLOON_ERROR_PPN_UNLOCKED 4 +#define VMW_BALLOON_ERROR_PPN_PINNED 5 +#define VMW_BALLOON_ERROR_PPN_NOTNEEDED 6 +#define VMW_BALLOON_ERROR_RESET 7 +#define VMW_BALLOON_ERROR_BUSY 8 + +#define VMWARE_BALLOON_CMD(cmd, data, result) \ +({ \ + unsigned long __stat, __dummy1, __dummy2; \ + __asm__ __volatile__ ("inl (%%dx)" : \ + "=a"(__stat), \ + "=c"(__dummy1), \ + "=d"(__dummy2), \ + "=b"(result) : \ + "0"(VMW_BALLOON_HV_MAGIC), \ + "1"(VMW_BALLOON_CMD_##cmd), \ + "2"(VMW_BALLOON_HV_PORT), \ + "3"(data) : \ + "memory"); \ + result &= -1UL; \ + __stat & -1UL; \ +}) + +#ifdef CONFIG_DEBUG_FS +struct vmballoon_stats { + unsigned int timer; + + /* allocation statustics */ + unsigned int alloc; + unsigned int alloc_fail; + unsigned int sleep_alloc; + unsigned int sleep_alloc_fail; + unsigned int refused_alloc; + unsigned int refused_free; + unsigned int free; + + /* monitor operations */ + unsigned int lock; + unsigned int lock_fail; + unsigned int unlock; + unsigned int unlock_fail; + unsigned int target; + unsigned int target_fail; + unsigned int start; + unsigned int start_fail; + unsigned int guest_type; + unsigned int guest_type_fail; +}; + +#define STATS_INC(stat) (stat)++ +#else +#define STATS_INC(stat) +#endif + +struct vmballoon { + + /* list of reserved physical pages */ + struct list_head pages; + + /* transient list of non-balloonable pages */ + struct list_head refused_pages; + + /* balloon size in pages */ + unsigned int size; + unsigned int target; + + /* reset flag */ + bool reset_required; + + /* adjustment rates (pages per second) */ + unsigned int rate_alloc; + unsigned int rate_free; + + /* slowdown page allocations for next few cycles */ + unsigned int slow_allocation_cycles; + +#ifdef CONFIG_DEBUG_FS + /* statistics */ + struct vmballoon_stats stats; + + /* debugfs file exporting statistics */ + struct dentry *dbg_entry; +#endif + + struct sysinfo sysinfo; + + struct delayed_work dwork; +}; + +static struct vmballoon balloon; +static struct workqueue_struct *vmballoon_wq; + +/* + * Send "start" command to the host, communicating supported version + * of the protocol. + */ +static bool vmballoon_send_start(struct vmballoon *b) +{ + unsigned long status, dummy; + + STATS_INC(b->stats.start); + + status = VMWARE_BALLOON_CMD(START, VMW_BALLOON_PROTOCOL_VERSION, dummy); + if (status == VMW_BALLOON_SUCCESS) + return true; + + pr_debug("%s - failed, hv returns %ld\n", __func__, status); + STATS_INC(b->stats.start_fail); + return false; +} + +static bool vmballoon_check_status(struct vmballoon *b, unsigned long status) +{ + switch (status) { + case VMW_BALLOON_SUCCESS: + return true; + + case VMW_BALLOON_ERROR_RESET: + b->reset_required = true; + /* fall through */ + + default: + return false; + } +} + +/* + * Communicate guest type to the host so that it can adjust ballooning + * algorithm to the one most appropriate for the guest. This command + * is normally issued after sending "start" command and is part of + * standard reset sequence. + */ +static bool vmballoon_send_guest_id(struct vmballoon *b) +{ + unsigned long status, dummy; + + status = VMWARE_BALLOON_CMD(GUEST_ID, VMW_BALLOON_GUEST_ID, dummy); + + STATS_INC(b->stats.guest_type); + + if (vmballoon_check_status(b, status)) + return true; + + pr_debug("%s - failed, hv returns %ld\n", __func__, status); + STATS_INC(b->stats.guest_type_fail); + return false; +} + +/* + * Retrieve desired balloon size from the host. + */ +static bool vmballoon_send_get_target(struct vmballoon *b, u32 *new_target) +{ + unsigned long status; + unsigned long target; + unsigned long limit; + u32 limit32; + + /* + * si_meminfo() is cheap. Moreover, we want to provide dynamic + * max balloon size later. So let us call si_meminfo() every + * iteration. + */ + si_meminfo(&b->sysinfo); + limit = b->sysinfo.totalram; + + /* Ensure limit fits in 32-bits */ + limit32 = (u32)limit; + if (limit != limit32) + return false; + + /* update stats */ + STATS_INC(b->stats.target); + + status = VMWARE_BALLOON_CMD(GET_TARGET, limit, target); + if (vmballoon_check_status(b, status)) { + *new_target = target; + return true; + } + + pr_debug("%s - failed, hv returns %ld\n", __func__, status); + STATS_INC(b->stats.target_fail); + return false; +} + +/* + * Notify the host about allocated page so that host can use it without + * fear that guest will need it. Host may reject some pages, we need to + * check the return value and maybe submit a different page. + */ +static bool vmballoon_send_lock_page(struct vmballoon *b, unsigned long pfn) +{ + unsigned long status, dummy; + u32 pfn32; + + pfn32 = (u32)pfn; + if (pfn32 != pfn) + return false; + + STATS_INC(b->stats.lock); + + status = VMWARE_BALLOON_CMD(LOCK, pfn, dummy); + if (vmballoon_check_status(b, status)) + return true; + + pr_debug("%s - ppn %lx, hv returns %ld\n", __func__, pfn, status); + STATS_INC(b->stats.lock_fail); + return false; +} + +/* + * Notify the host that guest intends to release given page back into + * the pool of available (to the guest) pages. + */ +static bool vmballoon_send_unlock_page(struct vmballoon *b, unsigned long pfn) +{ + unsigned long status, dummy; + u32 pfn32; + + pfn32 = (u32)pfn; + if (pfn32 != pfn) + return false; + + STATS_INC(b->stats.unlock); + + status = VMWARE_BALLOON_CMD(UNLOCK, pfn, dummy); + if (vmballoon_check_status(b, status)) + return true; + + pr_debug("%s - ppn %lx, hv returns %ld\n", __func__, pfn, status); + STATS_INC(b->stats.unlock_fail); + return false; +} + +/* + * Quickly release all pages allocated for the balloon. This function is + * called when host decides to "reset" balloon for one reason or another. + * Unlike normal "deflate" we do not (shall not) notify host of the pages + * being released. + */ +static void vmballoon_pop(struct vmballoon *b) +{ + struct page *page, *next; + unsigned int count = 0; + + list_for_each_entry_safe(page, next, &b->pages, lru) { + list_del(&page->lru); + __free_page(page); + STATS_INC(b->stats.free); + b->size--; + + if (++count >= b->rate_free) { + count = 0; + cond_resched(); + } + } +} + +/* + * Perform standard reset sequence by popping the balloon (in case it + * is not empty) and then restarting protocol. This operation normally + * happens when host responds with VMW_BALLOON_ERROR_RESET to a command. + */ +static void vmballoon_reset(struct vmballoon *b) +{ + /* free all pages, skipping monitor unlock */ + vmballoon_pop(b); + + if (vmballoon_send_start(b)) { + b->reset_required = false; + if (!vmballoon_send_guest_id(b)) + pr_err("failed to send guest ID to the host\n"); + } +} + +/* + * Allocate (or reserve) a page for the balloon and notify the host. If host + * refuses the page put it on "refuse" list and allocate another one until host + * is satisfied. "Refused" pages are released at the end of inflation cycle + * (when we allocate b->rate_alloc pages). + */ +static int vmballoon_reserve_page(struct vmballoon *b, bool can_sleep) +{ + struct page *page; + gfp_t flags; + bool locked = false; + + do { + if (!can_sleep) + STATS_INC(b->stats.alloc); + else + STATS_INC(b->stats.sleep_alloc); + + flags = can_sleep ? VMW_PAGE_ALLOC_CANSLEEP : VMW_PAGE_ALLOC_NOSLEEP; + page = alloc_page(flags); + if (!page) { + if (!can_sleep) + STATS_INC(b->stats.alloc_fail); + else + STATS_INC(b->stats.sleep_alloc_fail); + return -ENOMEM; + } + + /* inform monitor */ + locked = vmballoon_send_lock_page(b, page_to_pfn(page)); + if (!locked) { + if (b->reset_required) { + __free_page(page); + return -EIO; + } + + /* place on list of non-balloonable pages, retry allocation */ + list_add(&page->lru, &b->refused_pages); + STATS_INC(b->stats.refused_alloc); + } + } while (!locked); + + /* track allocated page */ + list_add(&page->lru, &b->pages); + + /* update balloon size */ + b->size++; + + return 0; +} + +/* + * Release the page allocated for the balloon. Note that we first notify + * the host so it can make sure the page will be available for the guest + * to use, if needed. + */ +static int vmballoon_release_page(struct vmballoon *b, struct page *page) +{ + if (!vmballoon_send_unlock_page(b, page_to_pfn(page))) + return -EIO; + + list_del(&page->lru); + + /* deallocate page */ + __free_page(page); + STATS_INC(b->stats.free); + + /* update balloon size */ + b->size--; + + return 0; +} + +/* + * Release pages that were allocated while attempting to inflate the + * balloon but were refused by the host for one reason or another. + */ +static void vmballoon_release_refused_pages(struct vmballoon *b) +{ + struct page *page, *next; + + list_for_each_entry_safe(page, next, &b->refused_pages, lru) { + list_del(&page->lru); + __free_page(page); + STATS_INC(b->stats.refused_free); + } +} + +/* + * Inflate the balloon towards its target size. Note that we try to limit + * the rate of allocation to make sure we are not choking the rest of the + * system. + */ +static void vmballoon_inflate(struct vmballoon *b) +{ + unsigned int goal; + unsigned int rate; + unsigned int i; + unsigned int allocations = 0; + int error = 0; + bool alloc_can_sleep = false; + + pr_debug("%s - size: %d, target %d\n", __func__, b->size, b->target); + + /* + * First try NOSLEEP page allocations to inflate balloon. + * + * If we do not throttle nosleep allocations, we can drain all + * free pages in the guest quickly (if the balloon target is high). + * As a side-effect, draining free pages helps to inform (force) + * the guest to start swapping if balloon target is not met yet, + * which is a desired behavior. However, balloon driver can consume + * all available CPU cycles if too many pages are allocated in a + * second. Therefore, we throttle nosleep allocations even when + * the guest is not under memory pressure. OTOH, if we have already + * predicted that the guest is under memory pressure, then we + * slowdown page allocations considerably. + */ + + goal = b->target - b->size; + /* + * Start with no sleep allocation rate which may be higher + * than sleeping allocation rate. + */ + rate = b->slow_allocation_cycles ? + b->rate_alloc : VMW_BALLOON_NOSLEEP_ALLOC_MAX; + + pr_debug("%s - goal: %d, no-sleep rate: %d, sleep rate: %d\n", + __func__, goal, rate, b->rate_alloc); + + for (i = 0; i < goal; i++) { + + error = vmballoon_reserve_page(b, alloc_can_sleep); + if (error) { + if (error != -ENOMEM) { + /* + * Not a page allocation failure, stop this + * cycle. Maybe we'll get new target from + * the host soon. + */ + break; + } + + if (alloc_can_sleep) { + /* + * CANSLEEP page allocation failed, so guest + * is under severe memory pressure. Quickly + * decrease allocation rate. + */ + b->rate_alloc = max(b->rate_alloc / 2, + VMW_BALLOON_RATE_ALLOC_MIN); + break; + } + + /* + * NOSLEEP page allocation failed, so the guest is + * under memory pressure. Let us slow down page + * allocations for next few cycles so that the guest + * gets out of memory pressure. Also, if we already + * allocated b->rate_alloc pages, let's pause, + * otherwise switch to sleeping allocations. + */ + b->slow_allocation_cycles = VMW_BALLOON_SLOW_CYCLES; + + if (i >= b->rate_alloc) + break; + + alloc_can_sleep = true; + /* Lower rate for sleeping allocations. */ + rate = b->rate_alloc; + } + + if (++allocations > VMW_BALLOON_YIELD_THRESHOLD) { + cond_resched(); + allocations = 0; + } + + if (i >= rate) { + /* We allocated enough pages, let's take a break. */ + break; + } + } + + /* + * We reached our goal without failures so try increasing + * allocation rate. + */ + if (error == 0 && i >= b->rate_alloc) { + unsigned int mult = i / b->rate_alloc; + + b->rate_alloc = + min(b->rate_alloc + mult * VMW_BALLOON_RATE_ALLOC_INC, + VMW_BALLOON_RATE_ALLOC_MAX); + } + + vmballoon_release_refused_pages(b); +} + +/* + * Decrease the size of the balloon allowing guest to use more memory. + */ +static void vmballoon_deflate(struct vmballoon *b) +{ + struct page *page, *next; + unsigned int i = 0; + unsigned int goal; + int error; + + pr_debug("%s - size: %d, target %d\n", __func__, b->size, b->target); + + /* limit deallocation rate */ + goal = min(b->size - b->target, b->rate_free); + + pr_debug("%s - goal: %d, rate: %d\n", __func__, goal, b->rate_free); + + /* free pages to reach target */ + list_for_each_entry_safe(page, next, &b->pages, lru) { + error = vmballoon_release_page(b, page); + if (error) { + /* quickly decrease rate in case of error */ + b->rate_free = max(b->rate_free / 2, + VMW_BALLOON_RATE_FREE_MIN); + return; + } + + if (++i >= goal) + break; + } + + /* slowly increase rate if there were no errors */ + b->rate_free = min(b->rate_free + VMW_BALLOON_RATE_FREE_INC, + VMW_BALLOON_RATE_FREE_MAX); +} + +/* + * Balloon work function: reset protocol, if needed, get the new size and + * adjust balloon as needed. Repeat in 1 sec. + */ +static void vmballoon_work(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct vmballoon *b = container_of(dwork, struct vmballoon, dwork); + unsigned int target; + + STATS_INC(b->stats.timer); + + if (b->reset_required) + vmballoon_reset(b); + + if (b->slow_allocation_cycles > 0) + b->slow_allocation_cycles--; + + if (vmballoon_send_get_target(b, &target)) { + /* update target, adjust size */ + b->target = target; + + if (b->size < target) + vmballoon_inflate(b); + else if (b->size > target) + vmballoon_deflate(b); + } + + queue_delayed_work(vmballoon_wq, dwork, round_jiffies_relative(HZ)); +} + +/* + * DEBUGFS Interface + */ +#ifdef CONFIG_DEBUG_FS + +static int vmballoon_debug_show(struct seq_file *f, void *offset) +{ + struct vmballoon *b = f->private; + struct vmballoon_stats *stats = &b->stats; + + /* format size info */ + seq_printf(f, + "target: %8d pages\n" + "current: %8d pages\n", + b->target, b->size); + + /* format rate info */ + seq_printf(f, + "rateNoSleepAlloc: %8d pages/sec\n" + "rateSleepAlloc: %8d pages/sec\n" + "rateFree: %8d pages/sec\n", + VMW_BALLOON_NOSLEEP_ALLOC_MAX, + b->rate_alloc, b->rate_free); + + seq_printf(f, + "\n" + "timer: %8u\n" + "start: %8u (%4u failed)\n" + "guestType: %8u (%4u failed)\n" + "lock: %8u (%4u failed)\n" + "unlock: %8u (%4u failed)\n" + "target: %8u (%4u failed)\n" + "primNoSleepAlloc: %8u (%4u failed)\n" + "primCanSleepAlloc: %8u (%4u failed)\n" + "primFree: %8u\n" + "errAlloc: %8u\n" + "errFree: %8u\n", + stats->timer, + stats->start, stats->start_fail, + stats->guest_type, stats->guest_type_fail, + stats->lock, stats->lock_fail, + stats->unlock, stats->unlock_fail, + stats->target, stats->target_fail, + stats->alloc, stats->alloc_fail, + stats->sleep_alloc, stats->sleep_alloc_fail, + stats->free, + stats->refused_alloc, stats->refused_free); + + return 0; +} + +static int vmballoon_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, vmballoon_debug_show, inode->i_private); +} + +static const struct file_operations vmballoon_debug_fops = { + .owner = THIS_MODULE, + .open = vmballoon_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init vmballoon_debugfs_init(struct vmballoon *b) +{ + int error; + + b->dbg_entry = debugfs_create_file("vmmemctl", S_IRUGO, NULL, b, + &vmballoon_debug_fops); + if (IS_ERR(b->dbg_entry)) { + error = PTR_ERR(b->dbg_entry); + pr_err("failed to create debugfs entry, error: %d\n", error); + return error; + } + + return 0; +} + +static void __exit vmballoon_debugfs_exit(struct vmballoon *b) +{ + debugfs_remove(b->dbg_entry); +} + +#else + +static inline int vmballoon_debugfs_init(struct vmballoon *b) +{ + return 0; +} + +static inline void vmballoon_debugfs_exit(struct vmballoon *b) +{ +} + +#endif /* CONFIG_DEBUG_FS */ + +static int __init vmballoon_init(void) +{ + int error; + + /* + * Check if we are running on VMware's hypervisor and bail out + * if we are not. + */ + if (!vmware_platform()) + return -ENODEV; + + vmballoon_wq = create_freezeable_workqueue("vmmemctl"); + if (!vmballoon_wq) { + pr_err("failed to create workqueue\n"); + return -ENOMEM; + } + + INIT_LIST_HEAD(&balloon.pages); + INIT_LIST_HEAD(&balloon.refused_pages); + + /* initialize rates */ + balloon.rate_alloc = VMW_BALLOON_RATE_ALLOC_MAX; + balloon.rate_free = VMW_BALLOON_RATE_FREE_MAX; + + INIT_DELAYED_WORK(&balloon.dwork, vmballoon_work); + + /* + * Start balloon. + */ + if (!vmballoon_send_start(&balloon)) { + pr_err("failed to send start command to the host\n"); + error = -EIO; + goto fail; + } + + if (!vmballoon_send_guest_id(&balloon)) { + pr_err("failed to send guest ID to the host\n"); + error = -EIO; + goto fail; + } + + error = vmballoon_debugfs_init(&balloon); + if (error) + goto fail; + + queue_delayed_work(vmballoon_wq, &balloon.dwork, 0); + + return 0; + +fail: + destroy_workqueue(vmballoon_wq); + return error; +} +module_init(vmballoon_init); + +static void __exit vmballoon_exit(void) +{ + cancel_delayed_work_sync(&balloon.dwork); + destroy_workqueue(vmballoon_wq); + + vmballoon_debugfs_exit(&balloon); + + /* + * Deallocate all reserved memory, and reset connection with monitor. + * Reset connection before deallocating memory to avoid potential for + * additional spurious resets from guest touching deallocated pages. + */ + vmballoon_send_start(&balloon); + vmballoon_pop(&balloon); +} +module_exit(vmballoon_exit); -- cgit v0.10.2 From 22eccdd7d2d94be48ae9b01fef5f52ccbb81dcd5 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 23 Apr 2010 13:18:10 -0400 Subject: ksm: check for ERR_PTR from follow_page() The follow_page() function can potentially return -EFAULT so I added checks for this. Also I silenced an uninitialized variable warning on my version of gcc (version 4.3.2). Signed-off-by: Dan Carpenter Acked-by: Rik van Riel Acked-by: Izik Eidus Cc: Andrea Arcangeli Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/ksm.c b/mm/ksm.c index 8cdfc2a..956880f 100644 --- a/mm/ksm.c +++ b/mm/ksm.c @@ -365,7 +365,7 @@ static int break_ksm(struct vm_area_struct *vma, unsigned long addr) do { cond_resched(); page = follow_page(vma, addr, FOLL_GET); - if (!page) + if (IS_ERR_OR_NULL(page)) break; if (PageKsm(page)) ret = handle_mm_fault(vma->vm_mm, vma, addr, @@ -447,7 +447,7 @@ static struct page *get_mergeable_page(struct rmap_item *rmap_item) goto out; page = follow_page(vma, addr, FOLL_GET); - if (!page) + if (IS_ERR_OR_NULL(page)) goto out; if (PageAnon(page)) { flush_anon_page(vma, page, addr); @@ -1086,7 +1086,7 @@ struct rmap_item *unstable_tree_search_insert(struct rmap_item *rmap_item, cond_resched(); tree_rmap_item = rb_entry(*new, struct rmap_item, node); tree_page = get_mergeable_page(tree_rmap_item); - if (!tree_page) + if (IS_ERR_OR_NULL(tree_page)) return NULL; /* @@ -1294,7 +1294,7 @@ next_mm: if (ksm_test_exit(mm)) break; *page = follow_page(vma, ksm_scan.address, FOLL_GET); - if (*page && PageAnon(*page)) { + if (!IS_ERR_OR_NULL(*page) && PageAnon(*page)) { flush_anon_page(vma, *page, ksm_scan.address); flush_dcache_page(*page); rmap_item = get_next_rmap_item(slot, @@ -1308,7 +1308,7 @@ next_mm: up_read(&mm->mmap_sem); return rmap_item; } - if (*page) + if (!IS_ERR_OR_NULL(*page)) put_page(*page); ksm_scan.address += PAGE_SIZE; cond_resched(); @@ -1367,7 +1367,7 @@ next_mm: static void ksm_do_scan(unsigned int scan_npages) { struct rmap_item *rmap_item; - struct page *page; + struct page *uninitialized_var(page); while (scan_npages--) { cond_resched(); -- cgit v0.10.2 From df37bd156dcb4f5441beaf5bde444adac974e9a0 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Fri, 23 Apr 2010 13:18:11 -0400 Subject: initramfs: handle unrecognised decompressor when unpacking The unpack routine fails to handle the decompress_method() returning unrecognised decompressor (compress_name == NULL). This results in the routine looping eventually oopsing on an out of bounds memory access. Note this bug is usually hidden, only triggering on trailing junk after one or more correct compressed blocks. The case of the compressed archive being complete junk is (by accident?) caught by the if (state != Reset) check because state is initialised to Start, but not updated due to the decompressor not having been called. Obviously if the junk is trailing a correctly decompressed buffer, state == Reset from the previous call to the decompressor. Signed-off-by: Phillip Lougher Reported-by: Aaro Koskinen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/init/initramfs.c b/init/initramfs.c index 37d3859..4b9c202 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -457,7 +457,8 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len) compress_name); message = msg_buf; } - } + } else + error("junk in compressed archive"); if (state != Reset) error("junk in compressed archive"); this_header = saved_offset + my_inptr; -- cgit v0.10.2 From 1cb08e97389bb603e1b999312d9686c8faf0187a Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Fri, 16 Apr 2010 01:01:36 +0100 Subject: squashfs: fix warn_on when root inode is corrupted Fix warn_on triggered by mounting a fsfuzzer corrupted file system, where the root inode has been corrupted. Signed-off-by: Phillip Lougher Reported-by: Steve Grubb diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c index 3550aec..07ceeb8 100644 --- a/fs/squashfs/super.c +++ b/fs/squashfs/super.c @@ -275,7 +275,8 @@ allocate_root: err = squashfs_read_inode(root, root_inode); if (err) { - iget_failed(root); + make_bad_inode(root); + iput(root); goto failed_mount; } insert_inode_hash(root); -- cgit v0.10.2 From 370ec3d1ed9d76ba992e5b9b7d7d10700014d436 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Fri, 23 Apr 2010 00:24:22 +0100 Subject: squashfs: add missing buffer free Signed-off-by: Phillip Lougher diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c index 07ceeb8..48b6f4a 100644 --- a/fs/squashfs/super.c +++ b/fs/squashfs/super.c @@ -354,6 +354,7 @@ static void squashfs_put_super(struct super_block *sb) kfree(sbi->id_table); kfree(sbi->fragment_index); kfree(sbi->meta_index); + kfree(sbi->inode_lookup_table); kfree(sb->s_fs_info); sb->s_fs_info = NULL; } -- cgit v0.10.2 From e0d1f70010dce062ccce1bbd940a661e60b82631 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Fri, 23 Apr 2010 02:32:02 +0100 Subject: squashfs: fix potential buffer over-run on 4K block file systems Sizing the buffer based on block size is incorrect, leading to a potential buffer over-run on 4K block size file systems (because the metadata block size is always 8K). This bug doesn't seem have triggered because 4K block size file systems are not default, and also because metadata blocks after compression tend to be less than 4K. Signed-off-by: Phillip Lougher diff --git a/fs/squashfs/block.c b/fs/squashfs/block.c index 1cb0d81..653c030 100644 --- a/fs/squashfs/block.c +++ b/fs/squashfs/block.c @@ -87,9 +87,8 @@ int squashfs_read_data(struct super_block *sb, void **buffer, u64 index, u64 cur_index = index >> msblk->devblksize_log2; int bytes, compressed, b = 0, k = 0, page = 0, avail; - - bh = kcalloc((msblk->block_size >> msblk->devblksize_log2) + 1, - sizeof(*bh), GFP_KERNEL); + bh = kcalloc(((srclength + msblk->devblksize - 1) + >> msblk->devblksize_log2) + 1, sizeof(*bh), GFP_KERNEL); if (bh == NULL) return -ENOMEM; -- cgit v0.10.2 From 401da6aea31ef69c2fcd260382adabdcf7ce820a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 24 Apr 2010 21:09:29 -0700 Subject: e100: Fix the TX workqueue race Nothing stops the workqueue being left to run in parallel with close or a few other operations. This causes double unmaps and the like. See kerneloops.org #1041230 for an example Signed-off-by: Alan Cox Signed-off-by: David S. Miller diff --git a/drivers/net/e100.c b/drivers/net/e100.c index b997e57..7910803 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -166,6 +166,7 @@ #include #include #include +#include #include @@ -2265,8 +2266,13 @@ static void e100_tx_timeout_task(struct work_struct *work) DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n", ioread8(&nic->csr->scb.status)); - e100_down(netdev_priv(netdev)); - e100_up(netdev_priv(netdev)); + + rtnl_lock(); + if (netif_running(netdev)) { + e100_down(netdev_priv(netdev)); + e100_up(netdev_priv(netdev)); + } + rtnl_unlock(); } static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) -- cgit v0.10.2 From 5129a469a91a91427334c40e29e64c6d0ab68caf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rn=20Engel?= Date: Sun, 25 Apr 2010 08:54:42 +0200 Subject: Catch filesystems lacking s_bdi noop_backing_dev_info is used only as a flag to mark filesystems that don't have any backing store, like tmpfs, procfs, spufs, etc. Signed-off-by: Joern Engel Changed the BUG_ON() to a WARN_ON(). Note that adding dirty inodes to the noop_backing_dev_info is not legal and will not result in them being flushed, but we already catch this condition in __mark_inode_dirty() when checking for a registered bdi. Signed-off-by: Jens Axboe diff --git a/fs/super.c b/fs/super.c index f35ac60..dc72491 100644 --- a/fs/super.c +++ b/fs/super.c @@ -693,6 +693,7 @@ int set_anon_super(struct super_block *s, void *data) return -EMFILE; } s->s_dev = MKDEV(0, dev & MINORMASK); + s->s_bdi = &noop_backing_dev_info; return 0; } @@ -954,10 +955,11 @@ vfs_kern_mount(struct file_system_type *type, int flags, const char *name, void if (error < 0) goto out_free_secdata; BUG_ON(!mnt->mnt_sb); + WARN_ON(!mnt->mnt_sb->s_bdi); - error = security_sb_kern_mount(mnt->mnt_sb, flags, secdata); - if (error) - goto out_sb; + error = security_sb_kern_mount(mnt->mnt_sb, flags, secdata); + if (error) + goto out_sb; /* * filesystems should never set s_maxbytes larger than MAX_LFS_FILESIZE diff --git a/fs/sync.c b/fs/sync.c index fc5c3d7..92b2281 100644 --- a/fs/sync.c +++ b/fs/sync.c @@ -14,6 +14,7 @@ #include #include #include +#include #include "internal.h" #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \ @@ -32,7 +33,7 @@ static int __sync_filesystem(struct super_block *sb, int wait) * This should be safe, as we require bdi backing to actually * write out data in the first place */ - if (!sb->s_bdi) + if (!sb->s_bdi || sb->s_bdi == &noop_backing_dev_info) return 0; if (sb->s_qcop && sb->s_qcop->quota_sync) diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index e19c677..bd0e3c6 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -247,6 +247,7 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio); #endif extern struct backing_dev_info default_backing_dev_info; +extern struct backing_dev_info noop_backing_dev_info; void default_unplug_io_fn(struct backing_dev_info *bdi, struct page *page); int writeback_in_progress(struct backing_dev_info *bdi); diff --git a/mm/backing-dev.c b/mm/backing-dev.c index dbda470..707d0dc 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -27,6 +27,11 @@ struct backing_dev_info default_backing_dev_info = { }; EXPORT_SYMBOL_GPL(default_backing_dev_info); +struct backing_dev_info noop_backing_dev_info = { + .name = "noop", +}; +EXPORT_SYMBOL_GPL(noop_backing_dev_info); + static struct class *bdi_class; /* -- cgit v0.10.2 From 6443bb1fc2050ca2b6585a3fa77f7833b55329ed Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 25 Apr 2010 15:09:42 -0700 Subject: ipv6: Fix inet6_csk_bind_conflict() Commit fda48a0d7a84 (tcp: bind() fix when many ports are bound) introduced a bug on IPV6 part. We should not call ipv6_addr_any(inet6_rcv_saddr(sk2)) but ipv6_addr_any(inet6_rcv_saddr(sk)) because sk2 can be IPV4, while sk is IPV6. Reported-by: Michael S. Tsirkin Signed-off-by: Eric Dumazet Tested-by: Michael S. Tsirkin Signed-off-by: David S. Miller diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c index b4b7d40..3a4d92b 100644 --- a/net/ipv6/inet6_connection_sock.c +++ b/net/ipv6/inet6_connection_sock.c @@ -48,7 +48,7 @@ int inet6_csk_bind_conflict(const struct sock *sk, ipv6_rcv_saddr_equal(sk, sk2)) break; else if (sk->sk_reuse && sk2->sk_reuse && - !ipv6_addr_any(inet6_rcv_saddr(sk2)) && + !ipv6_addr_any(inet6_rcv_saddr(sk)) && ipv6_rcv_saddr_equal(sk, sk2)) break; } -- cgit v0.10.2 From 180ce7e81030e1ef763d58f97f9ab840ff57d848 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 26 Apr 2010 09:14:05 +0800 Subject: crypto: authenc - Add EINPROGRESS check When Steffen originally wrote the authenc async hash patch, he correctly had EINPROGRESS checks in place so that we did not invoke the original completion handler with it. Unfortuantely I told him to remove it before the patch was applied. As only MAY_BACKLOG request completion handlers are required to handle EINPROGRESS completions, those checks are really needed. This patch restores them. Reported-by: Sebastian Andrzej Siewior Signed-off-by: Herbert Xu diff --git a/crypto/authenc.c b/crypto/authenc.c index 2bb7348..05eb32e 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -46,6 +46,12 @@ struct authenc_request_ctx { char tail[]; }; +static void authenc_request_complete(struct aead_request *req, int err) +{ + if (err != -EINPROGRESS) + aead_request_complete(req, err); +} + static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key, unsigned int keylen) { @@ -142,7 +148,7 @@ static void authenc_geniv_ahash_update_done(struct crypto_async_request *areq, crypto_aead_authsize(authenc), 1); out: - aead_request_complete(req, err); + authenc_request_complete(req, err); } static void authenc_geniv_ahash_done(struct crypto_async_request *areq, int err) @@ -208,7 +214,7 @@ static void authenc_verify_ahash_update_done(struct crypto_async_request *areq, err = crypto_ablkcipher_decrypt(abreq); out: - aead_request_complete(req, err); + authenc_request_complete(req, err); } static void authenc_verify_ahash_done(struct crypto_async_request *areq, @@ -245,7 +251,7 @@ static void authenc_verify_ahash_done(struct crypto_async_request *areq, err = crypto_ablkcipher_decrypt(abreq); out: - aead_request_complete(req, err); + authenc_request_complete(req, err); } static u8 *crypto_authenc_ahash_fb(struct aead_request *req, unsigned int flags) @@ -379,7 +385,7 @@ static void crypto_authenc_encrypt_done(struct crypto_async_request *req, err = crypto_authenc_genicv(areq, iv, 0); } - aead_request_complete(areq, err); + authenc_request_complete(areq, err); } static int crypto_authenc_encrypt(struct aead_request *req) @@ -420,7 +426,7 @@ static void crypto_authenc_givencrypt_done(struct crypto_async_request *req, err = crypto_authenc_genicv(areq, greq->giv, 0); } - aead_request_complete(areq, err); + authenc_request_complete(areq, err); } static int crypto_authenc_givencrypt(struct aead_givcrypt_request *req) -- cgit v0.10.2 From e6d086d83cf7f102d48c006f58172a69ec0c15a4 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 26 Apr 2010 10:27:54 +0200 Subject: btrfs: convert to using bdi_setup_and_register() It's now a provided helper, so get rid of the internal setup and btrfs atomic_t bdi enumerator. Signed-off-by: Jens Axboe diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index e7b8f2c..feca041 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -44,8 +44,6 @@ static struct extent_io_ops btree_extent_io_ops; static void end_workqueue_fn(struct btrfs_work *work); static void free_fs_root(struct btrfs_root *root); -static atomic_t btrfs_bdi_num = ATOMIC_INIT(0); - /* * end_io_wq structs are used to do processing in task context when an IO is * complete. This is used during reads to verify checksums, and it is used @@ -1375,19 +1373,11 @@ static int setup_bdi(struct btrfs_fs_info *info, struct backing_dev_info *bdi) { int err; - bdi->name = "btrfs"; bdi->capabilities = BDI_CAP_MAP_COPY; - err = bdi_init(bdi); + err = bdi_setup_and_register(bdi, "btrfs", BDI_CAP_MAP_COPY); if (err) return err; - err = bdi_register(bdi, NULL, "btrfs-%d", - atomic_inc_return(&btrfs_bdi_num)); - if (err) { - bdi_destroy(bdi); - return err; - } - bdi->ra_pages = default_backing_dev_info.ra_pages; bdi->unplug_io_fn = btrfs_unplug_io_fn; bdi->unplug_io_data = info; -- cgit v0.10.2 From dd77ef924c835c9813c3f4dc7e9c72e9cd88d238 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 20 Apr 2010 17:00:37 +1000 Subject: xfs: more swap extent fixes for dynamic fork offsets A new xfsqa test (226) with a prototype xfs_fsr change to try to handle dynamic fork offsets better triggers an assertion failure where the inode data fork is in btree format, yet there is room in the inode for it to be in extent format. The two inodes look like: before: ino 0x101 (target), num_extents 11, Max in-fork extents 6, broot size 40, fork offset 96 before: ino 0x115 (temp), num_extents 5, Max in-fork extents 3, broot size 40, fork offset 56 after: ino 0x101 (target), num_extents 5, Max in-fork extents 6, broot size 40, fork offset 96 after: ino 0x115 (temp), num_extents 11, Max in-fork extents 3, broot size 40, fork offset 56 Basically the target inode ends up with 5 extents in btree format, but it had space for 6 extents in extent format, so ends up incorrect. Notably here the broot size is the same, and that is where the kernel code is going wrong - the btree root will fit, so it lets the swap go ahead. The check should not allow the swap to take place if the number of extents while in btree format is less than the number of extents that can fit in the inode in extent format. Adding that check will prevent this swap and corruption from occurring. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c index cd27c9d..5bba29a 100644 --- a/fs/xfs/xfs_dfrag.c +++ b/fs/xfs/xfs_dfrag.c @@ -177,16 +177,26 @@ xfs_swap_extents_check_format( XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) > tip->i_df.if_ext_max) return EINVAL; - /* Check root block of temp in btree form to max in target */ + /* + * If we are in a btree format, check that the temp root block will fit + * in the target and that it has enough extents to be in btree format + * in the target. + * + * Note that we have to be careful to allow btree->extent conversions + * (a common defrag case) which will occur when the temp inode is in + * extent format... + */ if (tip->i_d.di_format == XFS_DINODE_FMT_BTREE && - XFS_IFORK_BOFF(ip) && - tip->i_df.if_broot_bytes > XFS_IFORK_BOFF(ip)) + ((XFS_IFORK_BOFF(ip) && + tip->i_df.if_broot_bytes > XFS_IFORK_BOFF(ip)) || + XFS_IFORK_NEXTENTS(tip, XFS_DATA_FORK) <= ip->i_df.if_ext_max)) return EINVAL; - /* Check root block of target in btree form to max in temp */ + /* Reciprocal target->temp btree format checks */ if (ip->i_d.di_format == XFS_DINODE_FMT_BTREE && - XFS_IFORK_BOFF(tip) && - ip->i_df.if_broot_bytes > XFS_IFORK_BOFF(tip)) + ((XFS_IFORK_BOFF(tip) && + ip->i_df.if_broot_bytes > XFS_IFORK_BOFF(tip)) || + XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) <= tip->i_df.if_ext_max)) return EINVAL; return 0; -- cgit v0.10.2 From 83bf6f11e82eba8533f8dbd241b2c2825e42ae5d Mon Sep 17 00:00:00 2001 From: Alexander Kurz Date: Sun, 25 Apr 2010 13:44:35 +0400 Subject: pcmcia: fix matching rules for pseudo-multi-function cards Prevent PCMCIA_DEV_ID_MATCH_FUNC_ID from grabbing PFC-cards: I changed the code, so that the first matching struct pcmcia_device_id _PFC_ entry will mark the card has_pfc, preventing PCMCIA_DEV_ID_MATCH_FUNC_ID to match. [linux-pcmcia@lists.infradead.org: re-order commit message] Signed-off-by: Alexander Kurz Signed-off-by: Dominik Brodowski diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 92a5af8..508f94a 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -820,11 +820,12 @@ static inline int pcmcia_devmatch(struct pcmcia_device *dev, } if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) { - if (dev->device_no != did->device_no) - return 0; + dev_dbg(&dev->dev, "this is a pseudo-multi-function device\n"); mutex_lock(&dev->socket->ops_mutex); dev->socket->pcmcia_state.has_pfc = 1; mutex_unlock(&dev->socket->ops_mutex); + if (dev->device_no != did->device_no) + return 0; } if (did->match_flags & PCMCIA_DEV_ID_MATCH_FUNC_ID) { @@ -835,7 +836,7 @@ static inline int pcmcia_devmatch(struct pcmcia_device *dev, /* if this is a pseudo-multi-function device, * we need explicit matches */ - if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) + if (dev->socket->pcmcia_state.has_pfc) return 0; if (dev->device_no) return 0; -- cgit v0.10.2 From 86913315de5ed13debd1566dfea15c4179b1f0c0 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 19 Apr 2010 08:37:11 -0700 Subject: Watchdog: sb_wdog.c: Fix sibyte watchdog initialization Watchdog configuration register and timer count register were interchanged, causing wrong values to be written into both registers. This caused watchdog triggered resets even if the watchdog was reset in time. Signed-off-by: Guenter Roeck Acked-by: Ralf Baechle Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c index c8eadd4..88c83aa 100644 --- a/drivers/watchdog/sb_wdog.c +++ b/drivers/watchdog/sb_wdog.c @@ -67,8 +67,8 @@ static DEFINE_SPINLOCK(sbwd_lock); void sbwdog_set(char __iomem *wdog, unsigned long t) { spin_lock(&sbwd_lock); - __raw_writeb(0, wdog - 0x10); - __raw_writeq(t & 0x7fffffUL, wdog); + __raw_writeb(0, wdog); + __raw_writeq(t & 0x7fffffUL, wdog - 0x10); spin_unlock(&sbwd_lock); } -- cgit v0.10.2 From dc8bf1b1a6edfc92465526de19772061302f0929 Mon Sep 17 00:00:00 2001 From: Andre Detsch Date: Mon, 26 Apr 2010 07:27:07 +0000 Subject: tg3: Fix INTx fallback when MSI fails tg3: Fix INTx fallback when MSI fails MSI setup changes the value of irq_vec in struct tg3 *tp. This attribute must be taken into account and restored before we try to do a new request_irq for INTx fallback. In powerpc, the original code was leading to an EINVAL return within request_irq, because the driver was trying to use the disabled MSI virtual irq number instead of tp->pdev->irq. Signed-off-by: Andre Detsch Acked-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 22cf1c4..ecc41cf 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -8633,6 +8633,7 @@ static int tg3_test_msi(struct tg3 *tp) pci_disable_msi(tp->pdev); tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI; + tp->napi[0].irq_vec = tp->pdev->irq; err = tg3_request_irq(tp, 0); if (err) -- cgit v0.10.2 From fcf1dd7e68ceb6420478c8d89d35b4745d0b2f42 Mon Sep 17 00:00:00 2001 From: Denis Turischev Date: Thu, 22 Apr 2010 19:50:03 +0300 Subject: watchdog: sbc_fitpc2_wdt: fixed I/O operations order There are fitpc2 compatible boards that hang with existent i/o operations order. Solution is to switch between writing to data and command ports. Signed-off-by: Denis Turischev Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c index 8d44c9b..2e44dd4 100644 --- a/drivers/watchdog/sbc_fitpc2_wdt.c +++ b/drivers/watchdog/sbc_fitpc2_wdt.c @@ -45,10 +45,10 @@ static DEFINE_SPINLOCK(wdt_lock); static void wdt_send_data(unsigned char command, unsigned char data) { - outb(command, COMMAND_PORT); - msleep(100); outb(data, DATA_PORT); msleep(200); + outb(command, COMMAND_PORT); + msleep(100); } static void wdt_enable(void) -- cgit v0.10.2 From 93c0c8b4a5a174645550d444bd5c3ff0cccf74cb Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Mon, 26 Apr 2010 11:20:32 -0700 Subject: ieee802154: Fix oops during ieee802154_sock_ioctl Trying to run izlisten (from lowpan-tools tests) on a device that does not exists I got the oops below. The problem is that we are using get_dev_by_name without checking if we really get a device back. We don't in this case and writing to dev->type generates this oops. [Oops code removed by Dmitry Eremin-Solenikov] If possible this patch should be applied to the current -rc fixes branch. Signed-off-by: Stefan Schmidt Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: David S. Miller diff --git a/net/ieee802154/af_ieee802154.c b/net/ieee802154/af_ieee802154.c index c7da600..93c91b6 100644 --- a/net/ieee802154/af_ieee802154.c +++ b/net/ieee802154/af_ieee802154.c @@ -151,6 +151,9 @@ static int ieee802154_dev_ioctl(struct sock *sk, struct ifreq __user *arg, dev_load(sock_net(sk), ifr.ifr_name); dev = dev_get_by_name(sock_net(sk), ifr.ifr_name); + if (!dev) + return -ENODEV; + if (dev->type == ARPHRD_IEEE802154 && dev->netdev_ops->ndo_do_ioctl) ret = dev->netdev_ops->ndo_do_ioctl(dev, &ifr, cmd); -- cgit v0.10.2 From 322af98c56c70b3ec6f637fb07d41a9591a6ff9a Mon Sep 17 00:00:00 2001 From: Denis Turischev Date: Thu, 22 Apr 2010 19:54:20 +0300 Subject: watchdog: sbc_fitpc2_wdt: fixed "scheduling while atomic" bug. spinlock need to be replaced by mutex because of sleep functions inside wdt_send_data. Signed-off-by: Denis Turischev Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c index 2e44dd4..c7d67e9 100644 --- a/drivers/watchdog/sbc_fitpc2_wdt.c +++ b/drivers/watchdog/sbc_fitpc2_wdt.c @@ -30,7 +30,7 @@ static int nowayout = WATCHDOG_NOWAYOUT; static unsigned int margin = 60; /* (secs) Default is 1 minute */ static unsigned long wdt_status; -static DEFINE_SPINLOCK(wdt_lock); +static DEFINE_MUTEX(wdt_lock); #define WDT_IN_USE 0 #define WDT_OK_TO_CLOSE 1 @@ -53,18 +53,18 @@ static void wdt_send_data(unsigned char command, unsigned char data) static void wdt_enable(void) { - spin_lock(&wdt_lock); + mutex_lock(&wdt_lock); wdt_send_data(IFACE_ON_COMMAND, 1); wdt_send_data(REBOOT_COMMAND, margin); - spin_unlock(&wdt_lock); + mutex_unlock(&wdt_lock); } static void wdt_disable(void) { - spin_lock(&wdt_lock); + mutex_lock(&wdt_lock); wdt_send_data(IFACE_ON_COMMAND, 0); wdt_send_data(REBOOT_COMMAND, 0); - spin_unlock(&wdt_lock); + mutex_unlock(&wdt_lock); } static int fitpc2_wdt_open(struct inode *inode, struct file *file) -- cgit v0.10.2 From 4eb8b9031a0314539605733597b1e30222d4da70 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 25 Apr 2010 08:59:07 +0000 Subject: bridge br_multicast: Ensure to initialize BR_INPUT_SKB_CB(skb)->mrouters_only. Even with commit 32dec5dd0233ebffa9cae25ce7ba6daeb7df4467 ("bridge br_multicast: Don't refer to BR_INPUT_SKB_CB(skb)->mrouters_only without IGMP snooping."), BR_INPUT_SKB_CB(skb)->mrouters_only is not appropriately initialized if IGMP snooping support is compiled and disabled, so we can see garbage. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 386c1536..eaa0e1b 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -957,9 +957,6 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br, unsigned offset; int err; - BR_INPUT_SKB_CB(skb)->igmp = 0; - BR_INPUT_SKB_CB(skb)->mrouters_only = 0; - /* We treat OOM as packet loss for now. */ if (!pskb_may_pull(skb, sizeof(*iph))) return -EINVAL; @@ -1049,6 +1046,9 @@ err_out: int br_multicast_rcv(struct net_bridge *br, struct net_bridge_port *port, struct sk_buff *skb) { + BR_INPUT_SKB_CB(skb)->igmp = 0; + BR_INPUT_SKB_CB(skb)->mrouters_only = 0; + if (br->multicast_disabled) return 0; -- cgit v0.10.2 From 55051feb57eba600b366006757304a0af3ada2bd Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 23 Apr 2010 17:05:24 -0600 Subject: x86/PCI: never allocate PCI MMIO resources below BIOS_END When we move a PCI device or assign resources to a device not configured by the BIOS, we want to avoid the BIOS region below 1MB. Note that if the BIOS places devices below 1MB, we leave them there. See https://bugzilla.kernel.org/show_bug.cgi?id=15744 and https://bugzilla.kernel.org/show_bug.cgi?id=15841 Tested-by: Andy Isaacson Tested-by: Andy Bailey Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 46fd43f..97da2ba 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -72,6 +72,9 @@ pcibios_align_resource(void *data, const struct resource *res, return start; if (start & 0x300) start = (start + 0x3ff) & ~0x3ff; + } else if (res->flags & IORESOURCE_MEM) { + if (start < BIOS_END) + start = BIOS_END; } return start; } -- cgit v0.10.2 From 2bc3c1179c781b359d4f2f3439cb3df72afc17fc Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Tue, 20 Apr 2010 12:16:52 +1000 Subject: nfsd4: bug in read_buf When read_buf is called to move over to the next page in the pagelist of an NFSv4 request, it sets argp->end to essentially a random number, certainly not an address within the page which argp->p now points to. So subsequent calls to READ_BUF will think there is much more than a page of spare space (the cast to u32 ensures an unsigned comparison) so we can expect to fall off the end of the second page. We never encountered thsi in testing because typically the only operations which use more than two pages are write-like operations, which have their own decoding logic. Something like a getattr after a write may cross a page boundary, but it would be very unusual for it to cross another boundary after that. Cc: stable@kernel.org Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index e170317..34ccf81 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -161,10 +161,10 @@ static __be32 *read_buf(struct nfsd4_compoundargs *argp, u32 nbytes) argp->p = page_address(argp->pagelist[0]); argp->pagelist++; if (argp->pagelen < PAGE_SIZE) { - argp->end = p + (argp->pagelen>>2); + argp->end = argp->p + (argp->pagelen>>2); argp->pagelen = 0; } else { - argp->end = p + (PAGE_SIZE>>2); + argp->end = argp->p + (PAGE_SIZE>>2); argp->pagelen -= PAGE_SIZE; } memcpy(((char*)p)+avail, argp->p, (nbytes - avail)); @@ -1426,10 +1426,10 @@ nfsd4_decode_compound(struct nfsd4_compoundargs *argp) argp->p = page_address(argp->pagelist[0]); argp->pagelist++; if (argp->pagelen < PAGE_SIZE) { - argp->end = p + (argp->pagelen>>2); + argp->end = argp->p + (argp->pagelen>>2); argp->pagelen = 0; } else { - argp->end = p + (PAGE_SIZE>>2); + argp->end = argp->p + (PAGE_SIZE>>2); argp->pagelen -= PAGE_SIZE; } } -- cgit v0.10.2 From 87aeec767e1de60d7f76abbb44df5372b0932b7b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Mon, 26 Apr 2010 11:42:06 +0000 Subject: r8169: failure to enable mwi should not be fatal Few (6) network drivers enable mwi explicitly. Fewer worry about a failure. It is not a fix but it should avoid some annoyance like http://bugzilla.kernel.org/show_bug.cgi?id=15454 Signed-off-by: Francois Romieu Cc: Conrad Kostecki Signed-off-by: David S. Miller diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index dbb1f5a..2b54389 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -2759,6 +2759,7 @@ static void rtl8169_release_board(struct pci_dev *pdev, struct net_device *dev, { iounmap(ioaddr); pci_release_regions(pdev); + pci_clear_mwi(pdev); pci_disable_device(pdev); free_netdev(dev); } @@ -3014,9 +3015,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_free_dev_1; } - rc = pci_set_mwi(pdev); - if (rc < 0) - goto err_out_disable_2; + if (pci_set_mwi(pdev) < 0) + netif_info(tp, probe, dev, "Mem-Wr-Inval unavailable\n"); /* make sure PCI base addr 1 is MMIO */ if (!(pci_resource_flags(pdev, region) & IORESOURCE_MEM)) { @@ -3024,7 +3024,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) "region #%d not an MMIO resource, aborting\n", region); rc = -ENODEV; - goto err_out_mwi_3; + goto err_out_mwi_2; } /* check for weird/broken PCI region reporting */ @@ -3032,13 +3032,13 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) netif_err(tp, probe, dev, "Invalid PCI region size(s), aborting\n"); rc = -ENODEV; - goto err_out_mwi_3; + goto err_out_mwi_2; } rc = pci_request_regions(pdev, MODULENAME); if (rc < 0) { netif_err(tp, probe, dev, "could not request regions\n"); - goto err_out_mwi_3; + goto err_out_mwi_2; } tp->cp_cmd = PCIMulRW | RxChkSum; @@ -3051,7 +3051,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (rc < 0) { netif_err(tp, probe, dev, "DMA configuration failed\n"); - goto err_out_free_res_4; + goto err_out_free_res_3; } } @@ -3060,7 +3060,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!ioaddr) { netif_err(tp, probe, dev, "cannot remap MMIO, aborting\n"); rc = -EIO; - goto err_out_free_res_4; + goto err_out_free_res_3; } tp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP); @@ -3102,7 +3102,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (i == ARRAY_SIZE(rtl_chip_info)) { dev_err(&pdev->dev, "driver bug, MAC version not found in rtl_chip_info\n"); - goto err_out_msi_5; + goto err_out_msi_4; } tp->chipset = i; @@ -3167,7 +3167,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) rc = register_netdev(dev); if (rc < 0) - goto err_out_msi_5; + goto err_out_msi_4; pci_set_drvdata(pdev, dev); @@ -3190,14 +3190,13 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) out: return rc; -err_out_msi_5: +err_out_msi_4: rtl_disable_msi(pdev, tp); iounmap(ioaddr); -err_out_free_res_4: +err_out_free_res_3: pci_release_regions(pdev); -err_out_mwi_3: +err_out_mwi_2: pci_clear_mwi(pdev); -err_out_disable_2: pci_disable_device(pdev); err_out_free_dev_1: free_netdev(dev); -- cgit v0.10.2 From 908ba2bfd22253f26fa910cd855e4ccffb1467d0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Mon, 26 Apr 2010 11:42:58 +0000 Subject: r8169: more broken register writes workaround 78f1cd02457252e1ffbc6caa44a17424a45286b8 ("fix broken register writes") does not work for Al Viro's r8169 (XID 18000000). Signed-off-by: Francois Romieu Signed-off-by: David S. Miller diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 2b54389..4748c21 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -2826,8 +2826,13 @@ static void rtl_rar_set(struct rtl8169_private *tp, u8 *addr) spin_lock_irq(&tp->lock); RTL_W8(Cfg9346, Cfg9346_Unlock); + RTL_W32(MAC4, high); + RTL_R32(MAC4); + RTL_W32(MAC0, low); + RTL_R32(MAC0); + RTL_W8(Cfg9346, Cfg9346_Lock); spin_unlock_irq(&tp->lock); -- cgit v0.10.2 From dbc9632a8c25c6efcc1ca3f3a2177c855b6e053e Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 21 Apr 2010 02:12:58 -0500 Subject: powerpc/fsl-booke: Fix CONFIG_RELOCATABLE support on FSL Book-E ppc32 The following commit broke CONFIG_RELOCATABLE support on FSL Book-E parts: commit 549e8152de8039506f69c677a4546e5427aa6ae7 Author: Paul Mackerras Date: Sat Aug 30 11:43:47 2008 +1000 powerpc: Make the 64-bit kernel as a position-independent executable The change to __va and __pa to use PAGE_OFFSET & MEMORY_START causes problems on the Book-E parts because we don't know MEMORY_START until after we parse the device tree. We need __va to work properly to even parse the device tree so we have a chicken an egg. So go back to using he other definition of __va/__pa on CONFIG_BOOKE and use the PAGE_OFFSET/MEMORY_START version on "Classic" PPC64. Also updated casts to handle phys_addr_t being a different size from unsigned long (ie 36-bit physical on PPC32). Signed-off-by: Kumar Gala diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index e96d52a..53b64be 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -108,8 +108,21 @@ extern phys_addr_t kernstart_addr; #define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) -#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - MEMORY_START)) +/* + * On Book-E parts we need __va to parse the device tree and we can't + * determine MEMORY_START until then. However we can determine PHYSICAL_START + * from information at hand (program counter, TLB lookup). + * + * On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use + * the other definitions for __va & __pa. + */ +#ifdef CONFIG_BOOKE +#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) - PHYSICAL_START + KERNELBASE)) +#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE) +#else +#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + PAGE_OFFSET - MEMORY_START)) #define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START) +#endif /* * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI, -- cgit v0.10.2 From e32ee7fa54e3172e6413cefaaee9222a3f521617 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 26 Mar 2010 18:07:15 +0000 Subject: drm: make sure vblank interrupts are disabled at DPMS time When we call drm_vblank_off() at DPMS off time (to wake any clients so they don't hang) we need to make sure interrupts are actually disabled. If drm_vblank_off() gets called before the vblank usage timer expires, it'll prevent the timer from disabling interrupts since it also clears the vblank_enabled flag for the pipe. Signed-off-by: Jesse Barnes Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index b98384d..99ce7dc 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -475,6 +475,7 @@ void drm_vblank_off(struct drm_device *dev, int crtc) unsigned long irqflags; spin_lock_irqsave(&dev->vbl_lock, irqflags); + dev->driver->disable_vblank(dev, crtc); DRM_WAKEUP(&dev->vbl_queue[crtc]); dev->vblank_enabled[crtc] = 0; dev->last_vblank[crtc] = dev->driver->get_vblank_counter(dev, crtc); -- cgit v0.10.2 From 88b045077a1462a47503137fd4ca0c31772819ca Mon Sep 17 00:00:00 2001 From: David Miller Date: Mon, 26 Apr 2010 02:55:42 -0700 Subject: drm/radeon: Fix sparc regression in r300_scratch() Commit b4fe945405e477cded91772b4fec854705443dd5 ("drm/radeon: Fix memory allocation failures in the preKMS command stream checking.") added a regression in that it completely tossed the get_unaligned() done by r300_scratch() which we added in commit 958a6f8ccb1964adc3eec84cf401c5baeb4fbca0 ("drm: radeon: Fix unaligned access in r300_scratch()."). Put it back. Signed-off-by: David S. Miller Acked-by: Matt Turner Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c index ea46d55..c5c2742 100644 --- a/drivers/gpu/drm/radeon/r300_cmdbuf.c +++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c @@ -921,7 +921,7 @@ static int r300_scratch(drm_radeon_private_t *dev_priv, ptr_addr = drm_buffer_read_object(cmdbuf->buffer, sizeof(stack_ptr_addr), &stack_ptr_addr); - ref_age_base = (u32 *)(unsigned long)*ptr_addr; + ref_age_base = (u32 *)(unsigned long)get_unaligned(ptr_addr); for (i=0; i < header.scratch.n_bufs; i++) { buf_idx = drm_buffer_pointer_to_dword(cmdbuf->buffer, 0); -- cgit v0.10.2 From a33eb6b91034c95b9b08576f68be170f995b2c7d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rn=20Engel?= Date: Tue, 27 Apr 2010 09:40:52 +0200 Subject: Move mtd_bdi_*mappable to mtdcore.c Removes one .h and one .c file that are never used outside of mtdcore.c. Signed-off-by: Joern Engel Edited to remove on leftover debug define. Signed-off-by: Jens Axboe diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 82d1e4d..4521b1e 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -4,7 +4,7 @@ # Core functionality. obj-$(CONFIG_MTD) += mtd.o -mtd-y := mtdcore.o mtdsuper.o mtdbdi.o +mtd-y := mtdcore.o mtdsuper.o mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o diff --git a/drivers/mtd/internal.h b/drivers/mtd/internal.h index c658fe7..e69de29 100644 --- a/drivers/mtd/internal.h +++ b/drivers/mtd/internal.h @@ -1,17 +0,0 @@ -/* Internal MTD definitions - * - * Copyright © 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * mtdbdi.c - */ -extern struct backing_dev_info mtd_bdi_unmappable; -extern struct backing_dev_info mtd_bdi_ro_mappable; -extern struct backing_dev_info mtd_bdi_rw_mappable; diff --git a/drivers/mtd/mtdbdi.c b/drivers/mtd/mtdbdi.c index 5ca5aed..e69de29 100644 --- a/drivers/mtd/mtdbdi.c +++ b/drivers/mtd/mtdbdi.c @@ -1,43 +0,0 @@ -/* MTD backing device capabilities - * - * Copyright © 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include "internal.h" - -/* - * backing device capabilities for non-mappable devices (such as NAND flash) - * - permits private mappings, copies are taken of the data - */ -struct backing_dev_info mtd_bdi_unmappable = { - .capabilities = BDI_CAP_MAP_COPY, -}; - -/* - * backing device capabilities for R/O mappable devices (such as ROM) - * - permits private mappings, copies are taken of the data - * - permits non-writable shared mappings - */ -struct backing_dev_info mtd_bdi_ro_mappable = { - .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT | - BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP), -}; - -/* - * backing device capabilities for writable mappable devices (such as RAM) - * - permits private mappings, copies are taken of the data - * - permits non-writable shared mappings - */ -struct backing_dev_info mtd_bdi_rw_mappable = { - .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT | - BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP | - BDI_CAP_WRITE_MAP), -}; diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 5b38b17..541d556 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -2,6 +2,9 @@ * Core registration and callback routines for MTD * drivers and users. * + * bdi bits are: + * Copyright © 2006 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) */ #include @@ -16,11 +19,39 @@ #include #include #include +#include #include -#include "internal.h" #include "mtdcore.h" +/* + * backing device capabilities for non-mappable devices (such as NAND flash) + * - permits private mappings, copies are taken of the data + */ +struct backing_dev_info mtd_bdi_unmappable = { + .capabilities = BDI_CAP_MAP_COPY, +}; + +/* + * backing device capabilities for R/O mappable devices (such as ROM) + * - permits private mappings, copies are taken of the data + * - permits non-writable shared mappings + */ +struct backing_dev_info mtd_bdi_ro_mappable = { + .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT | + BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP), +}; + +/* + * backing device capabilities for writable mappable devices (such as RAM) + * - permits private mappings, copies are taken of the data + * - permits non-writable shared mappings + */ +struct backing_dev_info mtd_bdi_rw_mappable = { + .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT | + BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP | + BDI_CAP_WRITE_MAP), +}; static int mtd_cls_suspend(struct device *dev, pm_message_t state); static int mtd_cls_resume(struct device *dev); -- cgit v0.10.2 From 0661b1ac5d48eb47c8a5948c0554fea25e0895ab Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 27 Apr 2010 09:49:47 +0200 Subject: mtd: ensure that bdi entries are properly initialized and registered They will be holding dirty inodes and be responsible for flushing them out, so they need to be setup properly. Signed-off-by: Jens Axboe diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 541d556..b177e75 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -659,20 +659,55 @@ done: /*====================================================================*/ /* Init code */ +static int __init mtd_bdi_init(struct backing_dev_info *bdi, const char *name) +{ + int ret; + + ret = bdi_init(bdi); + if (!ret) + ret = bdi_register(bdi, NULL, name); + + if (ret) + bdi_destroy(bdi); + + return ret; +} + static int __init init_mtd(void) { int ret; + ret = class_register(&mtd_class); + if (ret) + goto err_reg; + + ret = mtd_bdi_init(&mtd_bdi_unmappable, "mtd-unmap"); + if (ret) + goto err_bdi1; + + ret = mtd_bdi_init(&mtd_bdi_ro_mappable, "mtd-romap"); + if (ret) + goto err_bdi2; + + ret = mtd_bdi_init(&mtd_bdi_rw_mappable, "mtd-rwmap"); + if (ret) + goto err_bdi3; - if (ret) { - pr_err("Error registering mtd class: %d\n", ret); - return ret; - } #ifdef CONFIG_PROC_FS if ((proc_mtd = create_proc_entry( "mtd", 0, NULL ))) proc_mtd->read_proc = mtd_read_proc; #endif /* CONFIG_PROC_FS */ return 0; + +err_bdi3: + bdi_destroy(&mtd_bdi_ro_mappable); +err_bdi2: + bdi_destroy(&mtd_bdi_unmappable); +err_bdi1: + class_unregister(&mtd_class); +err_reg: + pr_err("Error registering mtd class or bdi: %d\n", ret); + return ret; } static void __exit cleanup_mtd(void) @@ -682,6 +717,9 @@ static void __exit cleanup_mtd(void) remove_proc_entry( "mtd", NULL); #endif /* CONFIG_PROC_FS */ class_unregister(&mtd_class); + bdi_destroy(&mtd_bdi_unmappable); + bdi_destroy(&mtd_bdi_ro_mappable); + bdi_destroy(&mtd_bdi_rw_mappable); } module_init(init_mtd); -- cgit v0.10.2 From d8d8b63b6dc413696ade040e52173c068df11702 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 26 Apr 2010 15:59:53 -0700 Subject: watchdog: booke_wdt: fix build - unconstify watchdog_info commit 42747d712de56cf2087b702d2ad90af114c53138 ("[WATCHDOG] watchdog_info constify") introduced the following build failure: CC booke_wdt.o booke_wdt.c: In function 'booke_wdt_init': booke_wdt.c:220: error: assignment of read-only variable 'ident' Fix this by removing 'const' qualifier from watchdog_info struct. Signed-off-by: Anton Vorontsov Signed-off-by: Wim Van Sebroeck Cc: Kumar Gala Signed-off-by: Andrew Morton diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index 500d383..801ead1 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -121,7 +121,7 @@ static ssize_t booke_wdt_write(struct file *file, const char __user *buf, return count; } -static const struct watchdog_info ident = { +static struct watchdog_info ident = { .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, .identity = "PowerPC Book-E Watchdog", }; -- cgit v0.10.2 From 5892753383090a3eddf0e1b043c95e3b2c7feda5 Mon Sep 17 00:00:00 2001 From: Rik van Riel Date: Mon, 26 Apr 2010 12:33:03 -0400 Subject: mmap: check ->vm_ops before dereferencing Check whether the VMA has a vm_ops before calling close, just like we check vm_ops before calling open a few dozen lines higher up in the function. Signed-off-by: Rik van Riel Reported-by: Dan Carpenter Signed-off-by: Linus Torvalds diff --git a/mm/mmap.c b/mm/mmap.c index f90ea92..456ec6f 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1977,7 +1977,8 @@ static int __split_vma(struct mm_struct * mm, struct vm_area_struct * vma, return 0; /* Clean everything up if vma_adjust failed. */ - new->vm_ops->close(new); + if (new->vm_ops && new->vm_ops->close) + new->vm_ops->close(new); if (new->vm_file) { if (vma->vm_flags & VM_EXECUTABLE) removed_exe_file_vma(mm); -- cgit v0.10.2 From 16a5b3c4143fc7f6cbe0ef9fd4e9a58376f91506 Mon Sep 17 00:00:00 2001 From: Christoph Egger Date: Mon, 26 Apr 2010 15:56:36 +0100 Subject: Remove redundant check for CONFIG_MMU The checks for CONFIG_MMU at this location are duplicated as all the code is located inside a #ifndef CONFIG_MMU block. So the first conditional block will always be included while the second never will. Signed-off-by: Christoph Egger Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index 7ab23e0..2c5f9a0 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -1005,15 +1005,8 @@ static int elf_fdpic_map_file_constdisp_on_uclinux( } } else if (!mm->start_data) { mm->start_data = seg->addr; -#ifndef CONFIG_MMU mm->end_data = seg->addr + phdr->p_memsz; -#endif } - -#ifdef CONFIG_MMU - if (seg->addr + phdr->p_memsz > mm->end_data) - mm->end_data = seg->addr + phdr->p_memsz; -#endif } seg++; -- cgit v0.10.2 From 61fac744dddb22d99c7b12250bc9bada7866df08 Mon Sep 17 00:00:00 2001 From: Peter Waskiewicz Date: Tue, 27 Apr 2010 00:38:15 +0000 Subject: ixgbe: Power down PHY during driver resets The PHY laser is still on during driver init. It's allowing garbage to hit our FIFO, which eventually can cause the entire device to die. Power down the laser while setting up the device, and re-enable the laser before getting link. Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index b405a00..12fc0e7 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -39,6 +39,8 @@ #define IXGBE_82599_MC_TBL_SIZE 128 #define IXGBE_82599_VFT_TBL_SIZE 128 +void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -69,8 +71,14 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) if (hw->phy.multispeed_fiber) { /* Set up dual speed SFP+ support */ mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; + mac->ops.disable_tx_laser = + &ixgbe_disable_tx_laser_multispeed_fiber; + mac->ops.enable_tx_laser = + &ixgbe_enable_tx_laser_multispeed_fiber; mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber; } else { + mac->ops.disable_tx_laser = NULL; + mac->ops.enable_tx_laser = NULL; mac->ops.flap_tx_laser = NULL; if ((mac->ops.get_media_type(hw) == ixgbe_media_type_backplane) && @@ -415,6 +423,44 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, return status; } + /** + * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively shutting down the Tx + * laser on the PHY, effectively halting physical link. + **/ +void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* Disable tx laser; allow 100us to go dark per spec */ + esdp_reg |= IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + udelay(100); +} + +/** + * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively turning on the Tx + * laser on the PHY, effectively starting physical link. + **/ +void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* Enable tx laser; allow 100ms to light up */ + esdp_reg &= ~IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + msleep(100); +} + /** * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser * @hw: pointer to hardware structure @@ -429,23 +475,11 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, **/ void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) { - u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); - hw_dbg(hw, "ixgbe_flap_tx_laser_multispeed_fiber\n"); if (hw->mac.autotry_restart) { - /* Disable tx laser; allow 100us to go dark per spec */ - esdp_reg |= IXGBE_ESDP_SDP3; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - udelay(100); - - /* Enable tx laser; allow 100ms to light up */ - esdp_reg &= ~IXGBE_ESDP_SDP3; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - msleep(100); - + ixgbe_disable_tx_laser_multispeed_fiber(hw); + ixgbe_enable_tx_laser_multispeed_fiber(hw); hw->mac.autotry_restart = false; } } diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 8f677cb..6c00ee4 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2982,6 +2982,10 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) else ixgbe_configure_msi_and_legacy(adapter); + /* enable the optics */ + if (hw->phy.multispeed_fiber) + hw->mac.ops.enable_tx_laser(hw); + clear_bit(__IXGBE_DOWN, &adapter->state); ixgbe_napi_enable_all(adapter); @@ -3243,6 +3247,10 @@ void ixgbe_down(struct ixgbe_adapter *adapter) /* signal that we are down to the interrupt handler */ set_bit(__IXGBE_DOWN, &adapter->state); + /* power down the optics */ + if (hw->phy.multispeed_fiber) + hw->mac.ops.disable_tx_laser(hw); + /* disable receive for all VFs and wait one second */ if (adapter->num_vfs) { /* ping all the active vfs to let them know we are going down */ @@ -6253,6 +6261,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, goto err_eeprom; } + /* power down the optics */ + if (hw->phy.multispeed_fiber) + hw->mac.ops.disable_tx_laser(hw); + init_timer(&adapter->watchdog_timer); adapter->watchdog_timer.function = &ixgbe_watchdog; adapter->watchdog_timer.data = (unsigned long)adapter; @@ -6400,16 +6412,6 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) del_timer_sync(&adapter->sfp_timer); cancel_work_sync(&adapter->watchdog_task); cancel_work_sync(&adapter->sfp_task); - if (adapter->hw.phy.multispeed_fiber) { - struct ixgbe_hw *hw = &adapter->hw; - /* - * Restart clause 37 autoneg, disable and re-enable - * the tx laser, to clear & alert the link partner - * that it needs to restart autotry - */ - hw->mac.autotry_restart = true; - hw->mac.ops.flap_tx_laser(hw); - } cancel_work_sync(&adapter->multispeed_fiber_task); cancel_work_sync(&adapter->sfp_config_module_task); if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE || diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 4ec6dc1..534affc 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -2398,6 +2398,8 @@ struct ixgbe_mac_operations { s32 (*enable_rx_dma)(struct ixgbe_hw *, u32); /* Link */ + void (*disable_tx_laser)(struct ixgbe_hw *); + void (*enable_tx_laser)(struct ixgbe_hw *); void (*flap_tx_laser)(struct ixgbe_hw *); s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool); s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool); -- cgit v0.10.2 From 6f461f6c7c961f0b1b73c0f27becf472a0ac606b Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 27 Apr 2010 03:33:04 +0000 Subject: e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata Prompted by a previous patch submitted by Matthew Garret , further digging into errata documentation reveals the current enabling or disabling of ASPM L0s and L1 states for certain parts supported by this driver are incorrect. 82571 and 82572 should always disable L1. For standard frames, 82573/82574/82583 can enable L1 but L0s must be disabled, and for jumbo frames 82573/82574 must disable L1. This allows for some parts to enable L1 in certain configurations leading to better power savings. Also according to the same errata, Early Receive (ERT) should be disabled on 82573 when using jumbo frames. Cc: Matthew Garret Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 712ccc6..9015555 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -336,7 +336,6 @@ static s32 e1000_get_variants_82571(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; static int global_quad_port_a; /* global port a indication */ struct pci_dev *pdev = adapter->pdev; - u16 eeprom_data = 0; int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1; s32 rc; @@ -387,16 +386,15 @@ static s32 e1000_get_variants_82571(struct e1000_adapter *adapter) if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD) adapter->flags &= ~FLAG_HAS_WOL; break; - case e1000_82573: + case e1000_82574: + case e1000_82583: + /* Disable ASPM L0s due to hardware errata */ + e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L0S); + if (pdev->device == E1000_DEV_ID_82573L) { - if (e1000_read_nvm(&adapter->hw, NVM_INIT_3GIO_3, 1, - &eeprom_data) < 0) - break; - if (!(eeprom_data & NVM_WORD1A_ASPM_MASK)) { - adapter->flags |= FLAG_HAS_JUMBO_FRAMES; - adapter->max_hw_frame_size = DEFAULT_JUMBO; - } + adapter->flags |= FLAG_HAS_JUMBO_FRAMES; + adapter->max_hw_frame_size = DEFAULT_JUMBO; } break; default: @@ -1792,6 +1790,7 @@ struct e1000_info e1000_82571_info = { | FLAG_RESET_OVERWRITES_LAA /* errata */ | FLAG_TARC_SPEED_MODE_BIT /* errata */ | FLAG_APME_CHECK_PORT_B, + .flags2 = FLAG2_DISABLE_ASPM_L1, /* errata 13 */ .pba = 38, .max_hw_frame_size = DEFAULT_JUMBO, .get_variants = e1000_get_variants_82571, @@ -1809,6 +1808,7 @@ struct e1000_info e1000_82572_info = { | FLAG_RX_CSUM_ENABLED | FLAG_HAS_CTRLEXT_ON_LOAD | FLAG_TARC_SPEED_MODE_BIT, /* errata */ + .flags2 = FLAG2_DISABLE_ASPM_L1, /* errata 13 */ .pba = 38, .max_hw_frame_size = DEFAULT_JUMBO, .get_variants = e1000_get_variants_82571, @@ -1820,13 +1820,11 @@ struct e1000_info e1000_82572_info = { struct e1000_info e1000_82573_info = { .mac = e1000_82573, .flags = FLAG_HAS_HW_VLAN_FILTER - | FLAG_HAS_JUMBO_FRAMES | FLAG_HAS_WOL | FLAG_APME_IN_CTRL3 | FLAG_RX_CSUM_ENABLED | FLAG_HAS_SMART_POWER_DOWN | FLAG_HAS_AMT - | FLAG_HAS_ERT | FLAG_HAS_SWSM_ON_LOAD, .pba = 20, .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 118bdf4..ee32b9b 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -37,6 +37,7 @@ #include #include #include +#include #include "hw.h" @@ -374,7 +375,7 @@ struct e1000_adapter { struct e1000_info { enum e1000_mac_type mac; unsigned int flags; - unsigned int flags2; + unsigned int flags2; u32 pba; u32 max_hw_frame_size; s32 (*get_variants)(struct e1000_adapter *); @@ -421,6 +422,7 @@ struct e1000_info { #define FLAG2_CRC_STRIPPING (1 << 0) #define FLAG2_HAS_PHY_WAKEUP (1 << 1) #define FLAG2_IS_DISCARDING (1 << 2) +#define FLAG2_DISABLE_ASPM_L1 (1 << 3) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) @@ -461,6 +463,7 @@ extern void e1000e_update_stats(struct e1000_adapter *adapter); extern bool e1000e_has_link(struct e1000_adapter *adapter); extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter); extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter); +extern void e1000e_disable_aspm(struct pci_dev *pdev, u16 state); extern unsigned int copybreak; diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 73d43c5..fb8fc7d 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4283,6 +4283,14 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) return -EINVAL; } + /* 82573 Errata 17 */ + if (((adapter->hw.mac.type == e1000_82573) || + (adapter->hw.mac.type == e1000_82574)) && + (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN)) { + adapter->flags2 |= FLAG2_DISABLE_ASPM_L1; + e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L1); + } + while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) msleep(1); /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */ @@ -4605,29 +4613,39 @@ static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, } } -static void e1000e_disable_l1aspm(struct pci_dev *pdev) +#ifdef CONFIG_PCIEASPM +static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) +{ + pci_disable_link_state(pdev, state); +} +#else +static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) { int pos; - u16 val; + u16 reg16; /* - * 82573 workaround - disable L1 ASPM on mobile chipsets - * - * L1 ASPM on various mobile (ich7) chipsets do not behave properly - * resulting in lost data or garbage information on the pci-e link - * level. This could result in (false) bad EEPROM checksum errors, - * long ping times (up to 2s) or even a system freeze/hang. - * - * Unfortunately this feature saves about 1W power consumption when - * active. + * Both device and parent should have the same ASPM setting. + * Disable ASPM in downstream component first and then upstream. */ - pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); - pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val); - if (val & 0x2) { - dev_warn(&pdev->dev, "Disabling L1 ASPM\n"); - val &= ~0x2; - pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, val); - } + pos = pci_pcie_cap(pdev); + pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); + reg16 &= ~state; + pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); + + pos = pci_pcie_cap(pdev->bus->self); + pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, ®16); + reg16 &= ~state; + pci_write_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, reg16); +} +#endif +void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) +{ + dev_info(&pdev->dev, "Disabling ASPM %s %s\n", + (state & PCIE_LINK_STATE_L0S) ? "L0s" : "", + (state & PCIE_LINK_STATE_L1) ? "L1" : ""); + + __e1000e_disable_aspm(pdev, state); } #ifdef CONFIG_PM @@ -4653,7 +4671,8 @@ static int e1000_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); pci_save_state(pdev); - e1000e_disable_l1aspm(pdev); + if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1) + e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1); err = pci_enable_device_mem(pdev); if (err) { @@ -4795,7 +4814,8 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) int err; pci_ers_result_t result; - e1000e_disable_l1aspm(pdev); + if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1) + e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1); err = pci_enable_device_mem(pdev); if (err) { dev_err(&pdev->dev, @@ -4889,13 +4909,6 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter) dev_warn(&adapter->pdev->dev, "Warning: detected DSPD enabled in EEPROM\n"); } - - ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf); - if (!ret_val && (le16_to_cpu(buf) & (3 << 2))) { - /* ASPM enable */ - dev_warn(&adapter->pdev->dev, - "Warning: detected ASPM enabled in EEPROM\n"); - } } static const struct net_device_ops e1000e_netdev_ops = { @@ -4944,7 +4957,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, u16 eeprom_data = 0; u16 eeprom_apme_mask = E1000_EEPROM_APME; - e1000e_disable_l1aspm(pdev); + if (ei->flags2 & FLAG2_DISABLE_ASPM_L1) + e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1); err = pci_enable_device_mem(pdev); if (err) -- cgit v0.10.2 From e95ef5d3f6bc60433883e1ef65dac747acd0bf1a Mon Sep 17 00:00:00 2001 From: Andre Detsch Date: Mon, 26 Apr 2010 05:38:27 +0000 Subject: cxgb3: Wait longer for control packets on initialization In some Power7 platforms, when using VIOS (Virtual I/O Server), we need to wait longer for control packets to finish transfer during initialization. Without this change, initialization may fail prematurely. Signed-off-by: Wen Xiong Signed-off-by: Andre Detsch Acked-by: Divy Le Ray Signed-off-by: David S. Miller diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index aced6c5..e3f1b85 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -439,7 +439,7 @@ static void free_irq_resources(struct adapter *adapter) static int await_mgmt_replies(struct adapter *adap, unsigned long init_cnt, unsigned long n) { - int attempts = 5; + int attempts = 10; while (adap->sge.qs[0].rspq.offload_pkts < init_cnt + n) { if (!--attempts) -- cgit v0.10.2 From c441b8d2cb2194b05550a558d6d95d8944e56a84 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 27 Apr 2010 11:28:09 +0000 Subject: bnx2: Fix lost MSI-X problem on 5709 NICs. It has been reported that under certain heavy traffic conditions in MSI-X mode, the driver can lose an MSI-X vector causing all packets in the associated rx/tx ring pair to be dropped. The problem is caused by the chip dropping the write to unmask the MSI-X vector by the kernel (when migrating the IRQ for example). This can be prevented by increasing the GRC timeout value for these register read and write operations. Thanks to Dell for helping us debug this problem. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index a257bab..4c1e51e 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -4759,8 +4759,12 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) rc = bnx2_alloc_bad_rbuf(bp); } - if (bp->flags & BNX2_FLAG_USING_MSIX) + if (bp->flags & BNX2_FLAG_USING_MSIX) { bnx2_setup_msix_tbl(bp); + /* Prevent MSIX table reads and write from timing out */ + REG_WR(bp, BNX2_MISC_ECO_HW_CTL, + BNX2_MISC_ECO_HW_CTL_LARGE_GRC_TMOUT_EN); + } return rc; } -- cgit v0.10.2 From 212f9934afccf9c97399216b694a7f452526d6da Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 27 Apr 2010 11:28:10 +0000 Subject: bnx2: Prevent "scheduling while atomic" warning with cnic, bonding and vlan. The bonding driver calls ndo_vlan_rx_register() while holding bond->lock. The bnx2 driver calls bnx2_netif_stop() to stop the rx handling while changing the vlgrp. The call also stops the cnic driver which sleeps while the bond->lock is held and cause the warning. This code path only needs to stop the NAPI rx handling while we are changing the vlgrp. Since no reset is going to occur, there is no need to stop cnic in this case. By adding a parameter to bnx2_netif_stop() to skip stopping cnic, we can avoid the warning. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 4c1e51e..35eec2d 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -651,9 +651,10 @@ bnx2_napi_enable(struct bnx2 *bp) } static void -bnx2_netif_stop(struct bnx2 *bp) +bnx2_netif_stop(struct bnx2 *bp, bool stop_cnic) { - bnx2_cnic_stop(bp); + if (stop_cnic) + bnx2_cnic_stop(bp); if (netif_running(bp->dev)) { int i; @@ -671,14 +672,15 @@ bnx2_netif_stop(struct bnx2 *bp) } static void -bnx2_netif_start(struct bnx2 *bp) +bnx2_netif_start(struct bnx2 *bp, bool start_cnic) { if (atomic_dec_and_test(&bp->intr_sem)) { if (netif_running(bp->dev)) { netif_tx_wake_all_queues(bp->dev); bnx2_napi_enable(bp); bnx2_enable_int(bp); - bnx2_cnic_start(bp); + if (start_cnic) + bnx2_cnic_start(bp); } } } @@ -6277,12 +6279,12 @@ bnx2_reset_task(struct work_struct *work) return; } - bnx2_netif_stop(bp); + bnx2_netif_stop(bp, true); bnx2_init_nic(bp, 1); atomic_set(&bp->intr_sem, 1); - bnx2_netif_start(bp); + bnx2_netif_start(bp, true); rtnl_unlock(); } @@ -6324,7 +6326,7 @@ bnx2_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp) struct bnx2 *bp = netdev_priv(dev); if (netif_running(dev)) - bnx2_netif_stop(bp); + bnx2_netif_stop(bp, false); bp->vlgrp = vlgrp; @@ -6335,7 +6337,7 @@ bnx2_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp) if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN) bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_KEEP_VLAN_UPDATE, 0, 1); - bnx2_netif_start(bp); + bnx2_netif_start(bp, false); } #endif @@ -7055,9 +7057,9 @@ bnx2_set_coalesce(struct net_device *dev, struct ethtool_coalesce *coal) bp->stats_ticks &= BNX2_HC_STATS_TICKS_HC_STAT_TICKS; if (netif_running(bp->dev)) { - bnx2_netif_stop(bp); + bnx2_netif_stop(bp, true); bnx2_init_nic(bp, 0); - bnx2_netif_start(bp); + bnx2_netif_start(bp, true); } return 0; @@ -7087,7 +7089,7 @@ bnx2_change_ring_size(struct bnx2 *bp, u32 rx, u32 tx) /* Reset will erase chipset stats; save them */ bnx2_save_stats(bp); - bnx2_netif_stop(bp); + bnx2_netif_stop(bp, true); bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET); bnx2_free_skbs(bp); bnx2_free_mem(bp); @@ -7115,7 +7117,7 @@ bnx2_change_ring_size(struct bnx2 *bp, u32 rx, u32 tx) bnx2_setup_cnic_irq_info(bp); mutex_unlock(&bp->cnic_lock); #endif - bnx2_netif_start(bp); + bnx2_netif_start(bp, true); } return 0; } @@ -7368,7 +7370,7 @@ bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf) if (etest->flags & ETH_TEST_FL_OFFLINE) { int i; - bnx2_netif_stop(bp); + bnx2_netif_stop(bp, true); bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_DIAG); bnx2_free_skbs(bp); @@ -7387,7 +7389,7 @@ bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf) bnx2_shutdown_chip(bp); else { bnx2_init_nic(bp, 1); - bnx2_netif_start(bp); + bnx2_netif_start(bp, true); } /* wait for link up */ @@ -8381,7 +8383,7 @@ bnx2_suspend(struct pci_dev *pdev, pm_message_t state) return 0; flush_scheduled_work(); - bnx2_netif_stop(bp); + bnx2_netif_stop(bp, true); netif_device_detach(dev); del_timer_sync(&bp->timer); bnx2_shutdown_chip(bp); @@ -8403,7 +8405,7 @@ bnx2_resume(struct pci_dev *pdev) bnx2_set_power_state(bp, PCI_D0); netif_device_attach(dev); bnx2_init_nic(bp, 1); - bnx2_netif_start(bp); + bnx2_netif_start(bp, true); return 0; } @@ -8430,7 +8432,7 @@ static pci_ers_result_t bnx2_io_error_detected(struct pci_dev *pdev, } if (netif_running(dev)) { - bnx2_netif_stop(bp); + bnx2_netif_stop(bp, true); del_timer_sync(&bp->timer); bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET); } @@ -8487,7 +8489,7 @@ static void bnx2_io_resume(struct pci_dev *pdev) rtnl_lock(); if (netif_running(dev)) - bnx2_netif_start(bp); + bnx2_netif_start(bp, true); netif_device_attach(dev); rtnl_unlock(); -- cgit v0.10.2 From 587611d6e4d5c0fb5e9492cb06d9054744d69536 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 27 Apr 2010 11:28:11 +0000 Subject: bnx2: Update version to 2.0.9. Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 35eec2d..ac90a38 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -58,8 +58,8 @@ #include "bnx2_fw.h" #define DRV_MODULE_NAME "bnx2" -#define DRV_MODULE_VERSION "2.0.8" -#define DRV_MODULE_RELDATE "Feb 15, 2010" +#define DRV_MODULE_VERSION "2.0.9" +#define DRV_MODULE_RELDATE "April 27, 2010" #define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-5.0.0.j6.fw" #define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-5.0.0.j3.fw" #define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-5.0.0.j9.fw" -- cgit v0.10.2 From dacf4fc85bbd063b8108b6c21275ae4a4fcce908 Mon Sep 17 00:00:00 2001 From: Andreas Hartmann Date: Tue, 27 Apr 2010 14:39:33 -0700 Subject: drivers/usb/net/kaweth.c: add device "Allied Telesyn AT-USB10 USB Ethernet Adapter" akpm: reluctantly typed in from https://bugzilla.kernel.org/show_bug.cgi?id=15599 Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index 52671ea..c4c334d 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -145,6 +145,7 @@ static struct usb_device_id usb_klsi_table[] = { { USB_DEVICE(0x0707, 0x0100) }, /* SMC 2202USB */ { USB_DEVICE(0x07aa, 0x0001) }, /* Correga K.K. */ { USB_DEVICE(0x07b8, 0x4000) }, /* D-Link DU-E10 */ + { USB_DEVICE(0x07c9, 0xb010) }, /* Allied Telesyn AT-USB10 USB Ethernet Adapter */ { USB_DEVICE(0x0846, 0x1001) }, /* NetGear EA-101 */ { USB_DEVICE(0x0846, 0x1002) }, /* NetGear EA-101 */ { USB_DEVICE(0x085a, 0x0008) }, /* PortGear Ethernet Adapter */ -- cgit v0.10.2 From 2a9151572224ad5fe808058097be94106470a6dc Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Sat, 24 Apr 2010 10:37:09 +0000 Subject: smc91c92_cs: spin_unlock_irqrestore before calling smc_interrupt() smc91c92_cs: * spin_unlock_irqrestore before calling smc_interrupt() in media_check() to avoid lockup. * use spin_lock_irqsave for ethtool function. Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index fd9d6e3..ccc5537 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -1804,23 +1804,30 @@ static void media_check(u_long arg) SMC_SELECT_BANK(1); media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1; + SMC_SELECT_BANK(saved_bank); + spin_unlock_irqrestore(&smc->lock, flags); + /* Check for pending interrupt with watchdog flag set: with this, we can limp along even if the interrupt is blocked */ if (smc->watchdog++ && ((i>>8) & i)) { if (!smc->fast_poll) printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name); + local_irq_save(flags); smc_interrupt(dev->irq, dev); + local_irq_restore(flags); smc->fast_poll = HZ; } if (smc->fast_poll) { smc->fast_poll--; smc->media.expires = jiffies + HZ/100; add_timer(&smc->media); - SMC_SELECT_BANK(saved_bank); - spin_unlock_irqrestore(&smc->lock, flags); return; } + spin_lock_irqsave(&smc->lock, flags); + + saved_bank = inw(ioaddr + BANK_SELECT); + if (smc->cfg & CFG_MII_SELECT) { if (smc->mii_if.phy_id < 0) goto reschedule; @@ -1978,15 +1985,16 @@ static int smc_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) unsigned int ioaddr = dev->base_addr; u16 saved_bank = inw(ioaddr + BANK_SELECT); int ret; + unsigned long flags; - spin_lock_irq(&smc->lock); + spin_lock_irqsave(&smc->lock, flags); SMC_SELECT_BANK(3); if (smc->cfg & CFG_MII_SELECT) ret = mii_ethtool_gset(&smc->mii_if, ecmd); else ret = smc_netdev_get_ecmd(dev, ecmd); SMC_SELECT_BANK(saved_bank); - spin_unlock_irq(&smc->lock); + spin_unlock_irqrestore(&smc->lock, flags); return ret; } @@ -1996,15 +2004,16 @@ static int smc_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) unsigned int ioaddr = dev->base_addr; u16 saved_bank = inw(ioaddr + BANK_SELECT); int ret; + unsigned long flags; - spin_lock_irq(&smc->lock); + spin_lock_irqsave(&smc->lock, flags); SMC_SELECT_BANK(3); if (smc->cfg & CFG_MII_SELECT) ret = mii_ethtool_sset(&smc->mii_if, ecmd); else ret = smc_netdev_set_ecmd(dev, ecmd); SMC_SELECT_BANK(saved_bank); - spin_unlock_irq(&smc->lock); + spin_unlock_irqrestore(&smc->lock, flags); return ret; } @@ -2014,12 +2023,13 @@ static u32 smc_get_link(struct net_device *dev) unsigned int ioaddr = dev->base_addr; u16 saved_bank = inw(ioaddr + BANK_SELECT); u32 ret; + unsigned long flags; - spin_lock_irq(&smc->lock); + spin_lock_irqsave(&smc->lock, flags); SMC_SELECT_BANK(3); ret = smc_link_ok(dev); SMC_SELECT_BANK(saved_bank); - spin_unlock_irq(&smc->lock); + spin_unlock_irqrestore(&smc->lock, flags); return ret; } @@ -2056,16 +2066,17 @@ static int smc_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) int rc = 0; u16 saved_bank; unsigned int ioaddr = dev->base_addr; + unsigned long flags; if (!netif_running(dev)) return -EINVAL; - spin_lock_irq(&smc->lock); + spin_lock_irqsave(&smc->lock, flags); saved_bank = inw(ioaddr + BANK_SELECT); SMC_SELECT_BANK(3); rc = generic_mii_ioctl(&smc->mii_if, mii, cmd, NULL); SMC_SELECT_BANK(saved_bank); - spin_unlock_irq(&smc->lock); + spin_unlock_irqrestore(&smc->lock, flags); return rc; } -- cgit v0.10.2 From d87ff58fda926fe5cb01214cccf1c72422ac776d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 26 Apr 2010 23:20:12 +0000 Subject: ipheth: potential null dereferences on error path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The calls to usb_free_buffer() dereference rx_urb and tx_urb in the parameter list but those could be NULL. Signed-off-by: Dan Carpenter Acked-by: L. Alberto Giménez Signed-off-by: David S. Miller diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c index fd10331..418825d 100644 --- a/drivers/net/usb/ipheth.c +++ b/drivers/net/usb/ipheth.c @@ -122,25 +122,25 @@ static int ipheth_alloc_urbs(struct ipheth_device *iphone) tx_urb = usb_alloc_urb(0, GFP_KERNEL); if (tx_urb == NULL) - goto error; + goto error_nomem; rx_urb = usb_alloc_urb(0, GFP_KERNEL); if (rx_urb == NULL) - goto error; + goto free_tx_urb; tx_buf = usb_buffer_alloc(iphone->udev, IPHETH_BUF_SIZE, GFP_KERNEL, &tx_urb->transfer_dma); if (tx_buf == NULL) - goto error; + goto free_rx_urb; rx_buf = usb_buffer_alloc(iphone->udev, IPHETH_BUF_SIZE, GFP_KERNEL, &rx_urb->transfer_dma); if (rx_buf == NULL) - goto error; + goto free_tx_buf; iphone->tx_urb = tx_urb; @@ -149,13 +149,14 @@ static int ipheth_alloc_urbs(struct ipheth_device *iphone) iphone->rx_buf = rx_buf; return 0; -error: - usb_buffer_free(iphone->udev, IPHETH_BUF_SIZE, rx_buf, - rx_urb->transfer_dma); +free_tx_buf: usb_buffer_free(iphone->udev, IPHETH_BUF_SIZE, tx_buf, tx_urb->transfer_dma); +free_rx_urb: usb_free_urb(rx_urb); +free_tx_urb: usb_free_urb(tx_urb); +error_nomem: return -ENOMEM; } -- cgit v0.10.2 From ba8b06e67ed7a560b0e7c80091bcadda4f4727a5 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 27 Apr 2010 18:33:54 -0400 Subject: NFS: Ensure that nfs_wb_page() waits for Pg_writeback to clear Neil Brown reports that he is seeing the BUG_ON(ret == 0) trigger in nfs_page_async_flush. According to the trace in https://bugzilla.novell.com/show_bug.cgi?id=599628 the problem appears to be due to nfs_wb_page() not waiting for the PG_writeback flag to clear. There is a ditto problem in nfs_wb_page_cancel() Signed-off-by: Trond Myklebust diff --git a/fs/nfs/write.c b/fs/nfs/write.c index ccde2ae..3aea3ca 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1472,6 +1472,7 @@ int nfs_wb_page_cancel(struct inode *inode, struct page *page) BUG_ON(!PageLocked(page)); for (;;) { + wait_on_page_writeback(page); req = nfs_page_find_request(page); if (req == NULL) break; @@ -1506,30 +1507,18 @@ int nfs_wb_page(struct inode *inode, struct page *page) .range_start = range_start, .range_end = range_end, }; - struct nfs_page *req; - int need_commit; int ret; while(PagePrivate(page)) { + wait_on_page_writeback(page); if (clear_page_dirty_for_io(page)) { ret = nfs_writepage_locked(page, &wbc); if (ret < 0) goto out_error; } - req = nfs_find_and_lock_request(page); - if (!req) - break; - if (IS_ERR(req)) { - ret = PTR_ERR(req); + ret = sync_inode(inode, &wbc); + if (ret < 0) goto out_error; - } - need_commit = test_bit(PG_CLEAN, &req->wb_flags); - nfs_clear_page_tag_locked(req); - if (need_commit) { - ret = nfs_commit_inode(inode, FLUSH_SYNC); - if (ret < 0) - goto out_error; - } } return 0; out_error: -- cgit v0.10.2 From b59ec78cdcc57e02bc3dddfa7134a2f0fd15c34d Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 27 Apr 2010 14:05:11 -0700 Subject: keys: don't need to use RCU in keyring_read() as semaphore is held keyring_read() doesn't need to use rcu_dereference() to access the keyring payload as the caller holds the key semaphore to prevent modifications from happening whilst the data is read out. This should solve the following warning: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- security/keys/keyring.c:204 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by keyctl/2144: #0: (&key->sem){+++++.}, at: [] keyctl_read_key+0x9c/0xcf stack backtrace: Pid: 2144, comm: keyctl Not tainted 2.6.34-rc2-cachefs #113 Call Trace: [] lockdep_rcu_dereference+0xaa/0xb2 [] keyring_read+0x4d/0xe7 [] keyctl_read_key+0xac/0xcf [] sys_keyctl+0x75/0xb9 [] system_call_fastpath+0x16/0x1b Signed-off-by: David Howells Cc: Herbert Xu Signed-off-by: Andrew Morton Signed-off-by: James Morris diff --git a/security/keys/keyring.c b/security/keys/keyring.c index e814d21..dd7cd0f 100644 --- a/security/keys/keyring.c +++ b/security/keys/keyring.c @@ -201,7 +201,7 @@ static long keyring_read(const struct key *keyring, int loop, ret; ret = 0; - klist = rcu_dereference(keyring->payload.subscriptions); + klist = keyring->payload.subscriptions; if (klist) { /* calculate how much data we could return */ -- cgit v0.10.2 From 9e584fbbd9fd4f0f10b8aafc9982df8d0b553e35 Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Tue, 27 Apr 2010 13:13:04 -0700 Subject: arch/avr32: fix build failure caused by wrong prototype This patch fixes a build failure introduced by 1d8393171 ("avr32: use generic ptrace_resume code") which had the static keyword as a leftover. arch/avr32/kernel/ptrace.c:32: error: static declaration of `user_enable_single_step' follows non-static declaration include/linux/ptrace.h:268: error: previous declaration of `user_enable_single_step' was here References: [1]http://kisskb.ellerman.id.au/kisskb/buildresult/2448162/ Signed-off-by: Peter Huewe Cc: Haavard Skinnemoen Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c index dd5b882..5e73c25 100644 --- a/arch/avr32/kernel/ptrace.c +++ b/arch/avr32/kernel/ptrace.c @@ -28,7 +28,7 @@ static struct pt_regs *get_user_regs(struct task_struct *tsk) THREAD_SIZE - sizeof(struct pt_regs)); } -static void user_enable_single_step(struct task_struct *tsk) +void user_enable_single_step(struct task_struct *tsk) { pr_debug("user_enable_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n", tsk->pid, task_pt_regs(tsk)->pc, task_pt_regs(tsk)->sr); -- cgit v0.10.2 From 3835541dd481091c4dbf5ef83c08aed12e50fd61 Mon Sep 17 00:00:00 2001 From: Jerome Marchand Date: Tue, 27 Apr 2010 13:13:06 -0700 Subject: procfs: fix tid fdinfo Correct the file_operations struct in fdinfo entry of tid_base_stuff[]. Presently /proc/*/task/*/fdinfo contains symlinks to opened files like /proc/*/fd/. Signed-off-by: Jerome Marchand Cc: Alexander Viro Cc: Miklos Szeredi Cc: Alexey Dobriyan Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/base.c b/fs/proc/base.c index 7621db8..8418fcc 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2909,7 +2909,7 @@ out_no_task: */ static const struct pid_entry tid_base_stuff[] = { DIR("fd", S_IRUSR|S_IXUSR, proc_fd_inode_operations, proc_fd_operations), - DIR("fdinfo", S_IRUSR|S_IXUSR, proc_fdinfo_inode_operations, proc_fd_operations), + DIR("fdinfo", S_IRUSR|S_IXUSR, proc_fdinfo_inode_operations, proc_fdinfo_operations), REG("environ", S_IRUSR, proc_environ_operations), INF("auxv", S_IRUSR, proc_pid_auxv), ONE("status", S_IRUGO, proc_pid_status), -- cgit v0.10.2 From a2cb9aeb3c9b2475955cec328487484034f414e4 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 27 Apr 2010 13:13:07 -0700 Subject: gpio: fix pca953x set_type 'scheduling while atomic' bug Bill Gatliff reported the following bug when using the irq_chip facility of the pca953x driver on a PPC platform: BUG: scheduling while atomic: insmod/1530/0x00000002 He traced it back to an i2c transaction in pca953x_irq_set_type(), which can be called with interrupt disabled (from __setup_irq()). As the i2c controller can sleep while sending a message, this qualifies as a bad idea. This patch moves the i2c transaction to pca953x_irq_bus_sync_unlock(), where it is actually safe to send an i2c message. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Marc Zyngier Reported-by: Bill Gatliff Cc: Eric Miao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index 7d521e1..b827c97 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -252,6 +252,18 @@ static void pca953x_irq_bus_lock(unsigned int irq) static void pca953x_irq_bus_sync_unlock(unsigned int irq) { struct pca953x_chip *chip = get_irq_chip_data(irq); + uint16_t new_irqs; + uint16_t level; + + /* Look for any newly setup interrupt */ + new_irqs = chip->irq_trig_fall | chip->irq_trig_raise; + new_irqs &= ~chip->reg_direction; + + while (new_irqs) { + level = __ffs(new_irqs); + pca953x_gpio_direction_input(&chip->gpio_chip, level); + new_irqs &= ~(1 << level); + } mutex_unlock(&chip->irq_lock); } @@ -278,7 +290,7 @@ static int pca953x_irq_set_type(unsigned int irq, unsigned int type) else chip->irq_trig_raise &= ~mask; - return pca953x_gpio_direction_input(&chip->gpio_chip, level); + return 0; } static struct irq_chip pca953x_irq_chip = { -- cgit v0.10.2 From 03449cd9eaa4fa3a7faa4a59474bafe2e90bd143 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 27 Apr 2010 13:13:08 -0700 Subject: keys: the request_key() syscall should link an existing key to the dest keyring The request_key() system call and request_key_and_link() should make a link from an existing key to the destination keyring (if supplied), not just from a new key to the destination keyring. This can be tested by: ring=`keyctl newring fred @s` keyctl request2 user debug:a a keyctl request user debug:a $ring keyctl list $ring If it says: keyring is empty then it didn't work. If it shows something like: 1 key in keyring: 1070462727: --alswrv 0 0 user: debug:a then it did. request_key() system call is meant to recursively search all your keyrings for the key you desire, and, optionally, if it doesn't exist, call out to userspace to create one for you. If request_key() finds or creates a key, it should, optionally, create a link to that key from the destination keyring specified. Therefore, if, after a successful call to request_key() with a desination keyring specified, you see the destination keyring empty, the code didn't work correctly. If you see the found key in the keyring, then it did - which is what the patch is required for. Signed-off-by: David Howells Cc: James Morris Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/keys/request_key.c b/security/keys/request_key.c index ea97c31..d737cea 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -339,8 +339,10 @@ static int construct_alloc_key(struct key_type *type, key_already_present: mutex_unlock(&key_construction_mutex); - if (dest_keyring) + if (dest_keyring) { + __key_link(dest_keyring, key_ref_to_ptr(key_ref)); up_write(&dest_keyring->sem); + } mutex_unlock(&user->cons_lock); key_put(key); *_key = key = key_ref_to_ptr(key_ref); @@ -431,6 +433,11 @@ struct key *request_key_and_link(struct key_type *type, if (!IS_ERR(key_ref)) { key = key_ref_to_ptr(key_ref); + if (dest_keyring) { + construct_get_dest_keyring(&dest_keyring); + key_link(dest_keyring, key); + key_put(dest_keyring); + } } else if (PTR_ERR(key_ref) != -EAGAIN) { key = ERR_CAST(key_ref); } else { -- cgit v0.10.2 From 761ed01b35ca32bfd4166cc3862ae80ee33e3a4b Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Tue, 27 Apr 2010 16:43:31 -0700 Subject: gianfar: Wait for both RX and TX to stop When gracefully stopping the controller, the driver was continuing if *either* RX or TX had stopped. We need to wait for both, or the controller could get into an invalid state. Signed-off-by: Andy Fleming Signed-off-by: David S. Miller diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index df49af3..4e97ca1 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1511,9 +1511,9 @@ static void gfar_halt_nodisable(struct net_device *dev) tempval |= (DMACTRL_GRS | DMACTRL_GTS); gfar_write(®s->dmactrl, tempval); - while (!(gfar_read(®s->ievent) & - (IEVENT_GRSC | IEVENT_GTSC))) - cpu_relax(); + spin_event_timeout(((gfar_read(®s->ievent) & + (IEVENT_GRSC | IEVENT_GTSC)) == + (IEVENT_GRSC | IEVENT_GTSC)), -1, 0); } } -- cgit v0.10.2 From 477fffb082920476cc26f238d65538ccb8d601e1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 21 Apr 2010 23:52:01 +0000 Subject: bluetooth: handle l2cap_create_connless_pdu() errors l2cap_create_connless_pdu() can sometimes return ERR_PTR(-ENOMEM) or ERR_PTR(-EFAULT). Signed-off-by: Dan Carpenter Acked-by: Marcel Holtmann Signed-off-by: David S. Miller diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 99d68c3..9753b69 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -1626,7 +1626,10 @@ static int l2cap_sock_sendmsg(struct kiocb *iocb, struct socket *sock, struct ms /* Connectionless channel */ if (sk->sk_type == SOCK_DGRAM) { skb = l2cap_create_connless_pdu(sk, msg, len); - err = l2cap_do_send(sk, skb); + if (IS_ERR(skb)) + err = PTR_ERR(skb); + else + err = l2cap_do_send(sk, skb); goto done; } -- cgit v0.10.2 From 55964d72d63b15df49a5df11ef91dc8601270815 Mon Sep 17 00:00:00 2001 From: Torgny Johansson Date: Tue, 27 Apr 2010 17:07:40 -0700 Subject: cdc_ether: fix autosuspend for mbm devices Autosuspend works until you bring the wwan interface up, then the device does not enter autosuspend anymore. The following patch fixes the problem by setting the .manage_power field in the mbm_info struct to the same as in the cdc_info struct (cdc_manager_power). Signed-off-by: Torgny Johansson Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index c8cdb7f..3547cf1 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -431,6 +431,7 @@ static const struct driver_info mbm_info = { .bind = cdc_bind, .unbind = usbnet_cdc_unbind, .status = cdc_status, + .manage_power = cdc_manage_power, }; /*-------------------------------------------------------------------------*/ -- cgit v0.10.2 From eb4fd8cd355c8ec425a12ec6cbdac614e8a4819d Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Tue, 27 Apr 2010 18:06:41 -0700 Subject: net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva Signed-off-by: Rory Filer Signed-off-by: David S. Miller diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 63be4ca..5d58abc 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -397,4 +397,14 @@ config USB_IPHETH For more information: http://giagio.com/wiki/moin.cgi/iPhoneEthernetDriver +config USB_SIERRA_NET + tristate "USB-to-WWAN Driver for Sierra Wireless modems" + depends on USB_USBNET + default y + help + Choose this option if you have a Sierra Wireless USB-to-WWAN device. + + To compile this driver as a module, choose M here: the + module will be called sierra_net. + endmenu diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index edb09c0..b13a279 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -24,4 +24,5 @@ obj-$(CONFIG_USB_USBNET) += usbnet.o obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o obj-$(CONFIG_USB_IPHETH) += ipheth.o +obj-$(CONFIG_USB_SIERRA_NET) += sierra_net.o diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c new file mode 100644 index 0000000..a44f9e0 --- /dev/null +++ b/drivers/net/usb/sierra_net.c @@ -0,0 +1,1001 @@ +/* + * USB-to-WWAN Driver for Sierra Wireless modems + * + * Copyright (C) 2008, 2009, 2010 Paxton Smith, Matthew Safar, Rory Filer + * + * + * Portions of this based on the cdc_ether driver by David Brownell (2003-2005) + * and Ole Andre Vadla Ravnas (ActiveSync) (2006). + * + * IMPORTANT DISCLAIMER: This driver is not commercially supported by + * Sierra Wireless. Use at your own risk. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define DRIVER_VERSION "v.2.0" +#define DRIVER_AUTHOR "Paxton Smith, Matthew Safar, Rory Filer" +#define DRIVER_DESC "USB-to-WWAN Driver for Sierra Wireless modems" +static const char driver_name[] = "sierra_net"; + +/* if defined debug messages enabled */ +/*#define DEBUG*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SWI_USB_REQUEST_GET_FW_ATTR 0x06 +#define SWI_GET_FW_ATTR_MASK 0x08 + +/* atomic counter partially included in MAC address to make sure 2 devices + * do not end up with the same MAC - concept breaks in case of > 255 ifaces + */ +static atomic_t iface_counter = ATOMIC_INIT(0); + +/* + * SYNC Timer Delay definition used to set the expiry time + */ +#define SIERRA_NET_SYNCDELAY (2*HZ) + +/* Max. MTU supported. The modem buffers are limited to 1500 */ +#define SIERRA_NET_MAX_SUPPORTED_MTU 1500 + +/* The SIERRA_NET_USBCTL_BUF_LEN defines a buffer size allocated for control + * message reception ... and thus the max. received packet. + * (May be the cause for parse_hip returning -EINVAL) + */ +#define SIERRA_NET_USBCTL_BUF_LEN 1024 + +/* list of interface numbers - used for constructing interface lists */ +struct sierra_net_iface_info { + const u32 infolen; /* number of interface numbers on list */ + const u8 *ifaceinfo; /* pointer to the array holding the numbers */ +}; + +struct sierra_net_info_data { + u16 rx_urb_size; + struct sierra_net_iface_info whitelist; +}; + +/* Private data structure */ +struct sierra_net_data { + + u8 ethr_hdr_tmpl[ETH_HLEN]; /* ethernet header template for rx'd pkts */ + + u16 link_up; /* air link up or down */ + u8 tx_hdr_template[4]; /* part of HIP hdr for tx'd packets */ + + u8 sync_msg[4]; /* SYNC message */ + u8 shdwn_msg[4]; /* Shutdown message */ + + /* Backpointer to the container */ + struct usbnet *usbnet; + + u8 ifnum; /* interface number */ + +/* Bit masks, must be a power of 2 */ +#define SIERRA_NET_EVENT_RESP_AVAIL 0x01 +#define SIERRA_NET_TIMER_EXPIRY 0x02 + unsigned long kevent_flags; + struct work_struct sierra_net_kevent; + struct timer_list sync_timer; /* For retrying SYNC sequence */ +}; + +struct param { + int is_present; + union { + void *ptr; + u32 dword; + u16 word; + u8 byte; + }; +}; + +/* HIP message type */ +#define SIERRA_NET_HIP_EXTENDEDID 0x7F +#define SIERRA_NET_HIP_HSYNC_ID 0x60 /* Modem -> host */ +#define SIERRA_NET_HIP_RESTART_ID 0x62 /* Modem -> host */ +#define SIERRA_NET_HIP_MSYNC_ID 0x20 /* Host -> modem */ +#define SIERRA_NET_HIP_SHUTD_ID 0x26 /* Host -> modem */ + +#define SIERRA_NET_HIP_EXT_IP_IN_ID 0x0202 +#define SIERRA_NET_HIP_EXT_IP_OUT_ID 0x0002 + +/* 3G UMTS Link Sense Indication definitions */ +#define SIERRA_NET_HIP_LSI_UMTSID 0x78 + +/* Reverse Channel Grant Indication HIP message */ +#define SIERRA_NET_HIP_RCGI 0x64 + +/* LSI Protocol types */ +#define SIERRA_NET_PROTOCOL_UMTS 0x01 +/* LSI Coverage */ +#define SIERRA_NET_COVERAGE_NONE 0x00 +#define SIERRA_NET_COVERAGE_NOPACKET 0x01 + +/* LSI Session */ +#define SIERRA_NET_SESSION_IDLE 0x00 +/* LSI Link types */ +#define SIERRA_NET_AS_LINK_TYPE_IPv4 0x00 + +struct lsi_umts { + u8 protocol; + u8 unused1; + __be16 length; + /* eventually use a union for the rest - assume umts for now */ + u8 coverage; + u8 unused2[41]; + u8 session_state; + u8 unused3[33]; + u8 link_type; + u8 pdp_addr_len; /* NW-supplied PDP address len */ + u8 pdp_addr[16]; /* NW-supplied PDP address (bigendian)) */ + u8 unused4[23]; + u8 dns1_addr_len; /* NW-supplied 1st DNS address len (bigendian) */ + u8 dns1_addr[16]; /* NW-supplied 1st DNS address */ + u8 dns2_addr_len; /* NW-supplied 2nd DNS address len */ + u8 dns2_addr[16]; /* NW-supplied 2nd DNS address (bigendian)*/ + u8 wins1_addr_len; /* NW-supplied 1st Wins address len */ + u8 wins1_addr[16]; /* NW-supplied 1st Wins address (bigendian)*/ + u8 wins2_addr_len; /* NW-supplied 2nd Wins address len */ + u8 wins2_addr[16]; /* NW-supplied 2nd Wins address (bigendian) */ + u8 unused5[4]; + u8 gw_addr_len; /* NW-supplied GW address len */ + u8 gw_addr[16]; /* NW-supplied GW address (bigendian) */ + u8 reserved[8]; +} __attribute__ ((packed)); + +#define SIERRA_NET_LSI_COMMON_LEN 4 +#define SIERRA_NET_LSI_UMTS_LEN (sizeof(struct lsi_umts)) +#define SIERRA_NET_LSI_UMTS_STATUS_LEN \ + (SIERRA_NET_LSI_UMTS_LEN - SIERRA_NET_LSI_COMMON_LEN) + +/* Forward definitions */ +static void sierra_sync_timer(unsigned long syncdata); +static int sierra_net_change_mtu(struct net_device *net, int new_mtu); + +/* Our own net device operations structure */ +static const struct net_device_ops sierra_net_device_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = sierra_net_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +/* get private data associated with passed in usbnet device */ +static inline struct sierra_net_data *sierra_net_get_private(struct usbnet *dev) +{ + return (struct sierra_net_data *)dev->data[0]; +} + +/* set private data associated with passed in usbnet device */ +static inline void sierra_net_set_private(struct usbnet *dev, + struct sierra_net_data *priv) +{ + dev->data[0] = (unsigned long)priv; +} + +/* is packet IPv4 */ +static inline int is_ip(struct sk_buff *skb) +{ + return (skb->protocol == cpu_to_be16(ETH_P_IP)); +} + +/* + * check passed in packet and make sure that: + * - it is linear (no scatter/gather) + * - it is ethernet (mac_header properly set) + */ +static int check_ethip_packet(struct sk_buff *skb, struct usbnet *dev) +{ + skb_reset_mac_header(skb); /* ethernet header */ + + if (skb_is_nonlinear(skb)) { + netdev_err(dev->net, "Non linear buffer-dropping\n"); + return 0; + } + + if (!pskb_may_pull(skb, ETH_HLEN)) + return 0; + skb->protocol = eth_hdr(skb)->h_proto; + + return 1; +} + +static const u8 *save16bit(struct param *p, const u8 *datap) +{ + p->is_present = 1; + p->word = get_unaligned_be16(datap); + return datap + sizeof(p->word); +} + +static const u8 *save8bit(struct param *p, const u8 *datap) +{ + p->is_present = 1; + p->byte = *datap; + return datap + sizeof(p->byte); +} + +/*----------------------------------------------------------------------------* + * BEGIN HIP * + *----------------------------------------------------------------------------*/ +/* HIP header */ +#define SIERRA_NET_HIP_HDR_LEN 4 +/* Extended HIP header */ +#define SIERRA_NET_HIP_EXT_HDR_LEN 6 + +struct hip_hdr { + int hdrlen; + struct param payload_len; + struct param msgid; + struct param msgspecific; + struct param extmsgid; +}; + +static int parse_hip(const u8 *buf, const u32 buflen, struct hip_hdr *hh) +{ + const u8 *curp = buf; + int padded; + + if (buflen < SIERRA_NET_HIP_HDR_LEN) + return -EPROTO; + + curp = save16bit(&hh->payload_len, curp); + curp = save8bit(&hh->msgid, curp); + curp = save8bit(&hh->msgspecific, curp); + + padded = hh->msgid.byte & 0x80; + hh->msgid.byte &= 0x7F; /* 7 bits */ + + hh->extmsgid.is_present = (hh->msgid.byte == SIERRA_NET_HIP_EXTENDEDID); + if (hh->extmsgid.is_present) { + if (buflen < SIERRA_NET_HIP_EXT_HDR_LEN) + return -EPROTO; + + hh->payload_len.word &= 0x3FFF; /* 14 bits */ + + curp = save16bit(&hh->extmsgid, curp); + hh->extmsgid.word &= 0x03FF; /* 10 bits */ + + hh->hdrlen = SIERRA_NET_HIP_EXT_HDR_LEN; + } else { + hh->payload_len.word &= 0x07FF; /* 11 bits */ + hh->hdrlen = SIERRA_NET_HIP_HDR_LEN; + } + + if (padded) { + hh->hdrlen++; + hh->payload_len.word--; + } + + /* if real packet shorter than the claimed length */ + if (buflen < (hh->hdrlen + hh->payload_len.word)) + return -EINVAL; + + return 0; +} + +static void build_hip(u8 *buf, const u16 payloadlen, + struct sierra_net_data *priv) +{ + /* the following doesn't have the full functionality. We + * currently build only one kind of header, so it is faster this way + */ + put_unaligned_be16(payloadlen, buf); + memcpy(buf+2, priv->tx_hdr_template, sizeof(priv->tx_hdr_template)); +} +/*----------------------------------------------------------------------------* + * END HIP * + *----------------------------------------------------------------------------*/ + +static int sierra_net_send_cmd(struct usbnet *dev, + u8 *cmd, int cmdlen, const char * cmd_name) +{ + struct sierra_net_data *priv = sierra_net_get_private(dev); + int status; + + status = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), + USB_CDC_SEND_ENCAPSULATED_COMMAND, + USB_DIR_OUT|USB_TYPE_CLASS|USB_RECIP_INTERFACE, 0, + priv->ifnum, cmd, cmdlen, USB_CTRL_SET_TIMEOUT); + + if (status != cmdlen && status != -ENODEV) + netdev_err(dev->net, "Submit %s failed %d\n", cmd_name, status); + + return status; +} + +static int sierra_net_send_sync(struct usbnet *dev) +{ + int status; + struct sierra_net_data *priv = sierra_net_get_private(dev); + + dev_dbg(&dev->udev->dev, "%s", __func__); + + status = sierra_net_send_cmd(dev, priv->sync_msg, + sizeof(priv->sync_msg), "SYNC"); + + return status; +} + +static void sierra_net_set_ctx_index(struct sierra_net_data *priv, u8 ctx_ix) +{ + dev_dbg(&(priv->usbnet->udev->dev), "%s %d", __func__, ctx_ix); + priv->tx_hdr_template[0] = 0x3F; + priv->tx_hdr_template[1] = ctx_ix; + *((u16 *)&priv->tx_hdr_template[2]) = + cpu_to_be16(SIERRA_NET_HIP_EXT_IP_OUT_ID); +} + +static inline int sierra_net_is_valid_addrlen(u8 len) +{ + return (len == sizeof(struct in_addr)); +} + +static int sierra_net_parse_lsi(struct usbnet *dev, char *data, int datalen) +{ + struct lsi_umts *lsi = (struct lsi_umts *)data; + + if (datalen < sizeof(struct lsi_umts)) { + netdev_err(dev->net, "%s: Data length %d, exp %Zu\n", + __func__, datalen, + sizeof(struct lsi_umts)); + return -1; + } + + if (lsi->length != cpu_to_be16(SIERRA_NET_LSI_UMTS_STATUS_LEN)) { + netdev_err(dev->net, "%s: LSI_UMTS_STATUS_LEN %d, exp %u\n", + __func__, be16_to_cpu(lsi->length), + (u32)SIERRA_NET_LSI_UMTS_STATUS_LEN); + return -1; + } + + /* Validate the protocol - only support UMTS for now */ + if (lsi->protocol != SIERRA_NET_PROTOCOL_UMTS) { + netdev_err(dev->net, "Protocol unsupported, 0x%02x\n", + lsi->protocol); + return -1; + } + + /* Validate the link type */ + if (lsi->link_type != SIERRA_NET_AS_LINK_TYPE_IPv4) { + netdev_err(dev->net, "Link type unsupported: 0x%02x\n", + lsi->link_type); + return -1; + } + + /* Validate the coverage */ + if (lsi->coverage == SIERRA_NET_COVERAGE_NONE + || lsi->coverage == SIERRA_NET_COVERAGE_NOPACKET) { + netdev_err(dev->net, "No coverage, 0x%02x\n", lsi->coverage); + return 0; + } + + /* Validate the session state */ + if (lsi->session_state == SIERRA_NET_SESSION_IDLE) { + netdev_err(dev->net, "Session idle, 0x%02x\n", + lsi->session_state); + return 0; + } + + /* Set link_sense true */ + return 1; +} + +static void sierra_net_handle_lsi(struct usbnet *dev, char *data, + struct hip_hdr *hh) +{ + struct sierra_net_data *priv = sierra_net_get_private(dev); + int link_up; + + link_up = sierra_net_parse_lsi(dev, data + hh->hdrlen, + hh->payload_len.word); + if (link_up < 0) { + netdev_err(dev->net, "Invalid LSI\n"); + return; + } + if (link_up) { + sierra_net_set_ctx_index(priv, hh->msgspecific.byte); + priv->link_up = 1; + netif_carrier_on(dev->net); + } else { + priv->link_up = 0; + netif_carrier_off(dev->net); + } +} + +static void sierra_net_dosync(struct usbnet *dev) +{ + int status; + struct sierra_net_data *priv = sierra_net_get_private(dev); + + dev_dbg(&dev->udev->dev, "%s", __func__); + + /* tell modem we are ready */ + status = sierra_net_send_sync(dev); + if (status < 0) + netdev_err(dev->net, + "Send SYNC failed, status %d\n", status); + status = sierra_net_send_sync(dev); + if (status < 0) + netdev_err(dev->net, + "Send SYNC failed, status %d\n", status); + + /* Now, start a timer and make sure we get the Restart Indication */ + priv->sync_timer.function = sierra_sync_timer; + priv->sync_timer.data = (unsigned long) dev; + priv->sync_timer.expires = jiffies + SIERRA_NET_SYNCDELAY; + add_timer(&priv->sync_timer); +} + +static void sierra_net_kevent(struct work_struct *work) +{ + struct sierra_net_data *priv = + container_of(work, struct sierra_net_data, sierra_net_kevent); + struct usbnet *dev = priv->usbnet; + int len; + int err; + u8 *buf; + u8 ifnum; + + if (test_bit(SIERRA_NET_EVENT_RESP_AVAIL, &priv->kevent_flags)) { + clear_bit(SIERRA_NET_EVENT_RESP_AVAIL, &priv->kevent_flags); + + /* Query the modem for the LSI message */ + buf = kzalloc(SIERRA_NET_USBCTL_BUF_LEN, GFP_KERNEL); + if (!buf) { + netdev_err(dev->net, + "failed to allocate buf for LS msg\n"); + return; + } + ifnum = priv->ifnum; + len = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), + USB_CDC_GET_ENCAPSULATED_RESPONSE, + USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE, + 0, ifnum, buf, SIERRA_NET_USBCTL_BUF_LEN, + USB_CTRL_SET_TIMEOUT); + + if (len < 0) { + netdev_err(dev->net, + "usb_control_msg failed, status %d\n", len); + } else { + struct hip_hdr hh; + + dev_dbg(&dev->udev->dev, "%s: Received status message," + " %04x bytes", __func__, len); + + err = parse_hip(buf, len, &hh); + if (err) { + netdev_err(dev->net, "%s: Bad packet," + " parse result %d\n", __func__, err); + kfree(buf); + return; + } + + /* Validate packet length */ + if (len != hh.hdrlen + hh.payload_len.word) { + netdev_err(dev->net, "%s: Bad packet, received" + " %d, expected %d\n", __func__, len, + hh.hdrlen + hh.payload_len.word); + kfree(buf); + return; + } + + /* Switch on received message types */ + switch (hh.msgid.byte) { + case SIERRA_NET_HIP_LSI_UMTSID: + dev_dbg(&dev->udev->dev, "LSI for ctx:%d", + hh.msgspecific.byte); + sierra_net_handle_lsi(dev, buf, &hh); + break; + case SIERRA_NET_HIP_RESTART_ID: + dev_dbg(&dev->udev->dev, "Restart reported: %d," + " stopping sync timer", + hh.msgspecific.byte); + /* Got sync resp - stop timer & clear mask */ + del_timer_sync(&priv->sync_timer); + clear_bit(SIERRA_NET_TIMER_EXPIRY, + &priv->kevent_flags); + break; + case SIERRA_NET_HIP_HSYNC_ID: + dev_dbg(&dev->udev->dev, "SYNC received"); + err = sierra_net_send_sync(dev); + if (err < 0) + netdev_err(dev->net, + "Send SYNC failed %d\n", err); + break; + case SIERRA_NET_HIP_EXTENDEDID: + netdev_err(dev->net, "Unrecognized HIP msg, " + "extmsgid 0x%04x\n", hh.extmsgid.word); + break; + case SIERRA_NET_HIP_RCGI: + /* Ignored */ + break; + default: + netdev_err(dev->net, "Unrecognized HIP msg, " + "msgid 0x%02x\n", hh.msgid.byte); + break; + } + } + kfree(buf); + } + /* The sync timer bit might be set */ + if (test_bit(SIERRA_NET_TIMER_EXPIRY, &priv->kevent_flags)) { + clear_bit(SIERRA_NET_TIMER_EXPIRY, &priv->kevent_flags); + dev_dbg(&dev->udev->dev, "Deferred sync timer expiry"); + sierra_net_dosync(priv->usbnet); + } + + if (priv->kevent_flags) + dev_dbg(&dev->udev->dev, "sierra_net_kevent done, " + "kevent_flags = 0x%lx", priv->kevent_flags); +} + +static void sierra_net_defer_kevent(struct usbnet *dev, int work) +{ + struct sierra_net_data *priv = sierra_net_get_private(dev); + + set_bit(work, &priv->kevent_flags); + schedule_work(&priv->sierra_net_kevent); +} + +/* + * Sync Retransmit Timer Handler. On expiry, kick the work queue + */ +void sierra_sync_timer(unsigned long syncdata) +{ + struct usbnet *dev = (struct usbnet *)syncdata; + + dev_dbg(&dev->udev->dev, "%s", __func__); + /* Kick the tasklet */ + sierra_net_defer_kevent(dev, SIERRA_NET_TIMER_EXPIRY); +} + +static void sierra_net_status(struct usbnet *dev, struct urb *urb) +{ + struct usb_cdc_notification *event; + + dev_dbg(&dev->udev->dev, "%s", __func__); + + if (urb->actual_length < sizeof *event) + return; + + /* Add cases to handle other standard notifications. */ + event = urb->transfer_buffer; + switch (event->bNotificationType) { + case USB_CDC_NOTIFY_NETWORK_CONNECTION: + case USB_CDC_NOTIFY_SPEED_CHANGE: + /* USB 305 sends those */ + break; + case USB_CDC_NOTIFY_RESPONSE_AVAILABLE: + sierra_net_defer_kevent(dev, SIERRA_NET_EVENT_RESP_AVAIL); + break; + default: + netdev_err(dev->net, ": unexpected notification %02x!\n", + event->bNotificationType); + break; + } +} + +static void sierra_net_get_drvinfo(struct net_device *net, + struct ethtool_drvinfo *info) +{ + /* Inherit standard device info */ + usbnet_get_drvinfo(net, info); + strncpy(info->driver, driver_name, sizeof info->driver); + strncpy(info->version, DRIVER_VERSION, sizeof info->version); +} + +static u32 sierra_net_get_link(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + /* Report link is down whenever the interface is down */ + return sierra_net_get_private(dev)->link_up && netif_running(net); +} + +static struct ethtool_ops sierra_net_ethtool_ops = { + .get_drvinfo = sierra_net_get_drvinfo, + .get_link = sierra_net_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, +}; + +/* MTU can not be more than 1500 bytes, enforce it. */ +static int sierra_net_change_mtu(struct net_device *net, int new_mtu) +{ + if (new_mtu > SIERRA_NET_MAX_SUPPORTED_MTU) + return -EINVAL; + + return usbnet_change_mtu(net, new_mtu); +} + +static int is_whitelisted(const u8 ifnum, + const struct sierra_net_iface_info *whitelist) +{ + if (whitelist) { + const u8 *list = whitelist->ifaceinfo; + int i; + + for (i = 0; i < whitelist->infolen; i++) { + if (list[i] == ifnum) + return 1; + } + } + return 0; +} + +static int sierra_net_get_fw_attr(struct usbnet *dev, u16 *datap) +{ + int result = 0; + u16 *attrdata; + + attrdata = kmalloc(sizeof(*attrdata), GFP_KERNEL); + if (!attrdata) + return -ENOMEM; + + result = usb_control_msg( + dev->udev, + usb_rcvctrlpipe(dev->udev, 0), + /* _u8 vendor specific request */ + SWI_USB_REQUEST_GET_FW_ATTR, + USB_DIR_IN | USB_TYPE_VENDOR, /* __u8 request type */ + 0x0000, /* __u16 value not used */ + 0x0000, /* __u16 index not used */ + attrdata, /* char *data */ + sizeof(*attrdata), /* __u16 size */ + USB_CTRL_SET_TIMEOUT); /* int timeout */ + + if (result < 0) { + kfree(attrdata); + return -EIO; + } + + *datap = *attrdata; + + kfree(attrdata); + return result; +} + +/* + * collects the bulk endpoints, the status endpoint. + */ +static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf) +{ + u8 ifacenum; + u8 numendpoints; + u16 fwattr = 0; + int status; + struct ethhdr *eth; + struct sierra_net_data *priv; + static const u8 sync_tmplate[sizeof(priv->sync_msg)] = { + 0x00, 0x00, SIERRA_NET_HIP_MSYNC_ID, 0x00}; + static const u8 shdwn_tmplate[sizeof(priv->shdwn_msg)] = { + 0x00, 0x00, SIERRA_NET_HIP_SHUTD_ID, 0x00}; + + struct sierra_net_info_data *data = + (struct sierra_net_info_data *)dev->driver_info->data; + + dev_dbg(&dev->udev->dev, "%s", __func__); + + ifacenum = intf->cur_altsetting->desc.bInterfaceNumber; + /* We only accept certain interfaces */ + if (!is_whitelisted(ifacenum, &data->whitelist)) { + dev_dbg(&dev->udev->dev, "Ignoring interface: %d", ifacenum); + return -ENODEV; + } + numendpoints = intf->cur_altsetting->desc.bNumEndpoints; + /* We have three endpoints, bulk in and out, and a status */ + if (numendpoints != 3) { + dev_err(&dev->udev->dev, "Expected 3 endpoints, found: %d", + numendpoints); + return -ENODEV; + } + /* Status endpoint set in usbnet_get_endpoints() */ + dev->status = NULL; + status = usbnet_get_endpoints(dev, intf); + if (status < 0) { + dev_err(&dev->udev->dev, "Error in usbnet_get_endpoints (%d)", + status); + return -ENODEV; + } + /* Initialize sierra private data */ + priv = kzalloc(sizeof *priv, GFP_KERNEL); + if (!priv) { + dev_err(&dev->udev->dev, "No memory"); + return -ENOMEM; + } + + priv->usbnet = dev; + priv->ifnum = ifacenum; + dev->net->netdev_ops = &sierra_net_device_ops; + + /* change MAC addr to include, ifacenum, and to be unique */ + dev->net->dev_addr[ETH_ALEN-2] = atomic_inc_return(&iface_counter); + dev->net->dev_addr[ETH_ALEN-1] = ifacenum; + + /* we will have to manufacture ethernet headers, prepare template */ + eth = (struct ethhdr *)priv->ethr_hdr_tmpl; + memcpy(ð->h_dest, dev->net->dev_addr, ETH_ALEN); + eth->h_proto = cpu_to_be16(ETH_P_IP); + + /* prepare shutdown message template */ + memcpy(priv->shdwn_msg, shdwn_tmplate, sizeof(priv->shdwn_msg)); + /* set context index initially to 0 - prepares tx hdr template */ + sierra_net_set_ctx_index(priv, 0); + + /* decrease the rx_urb_size and max_tx_size to 4k on USB 1.1 */ + dev->rx_urb_size = data->rx_urb_size; + if (dev->udev->speed != USB_SPEED_HIGH) + dev->rx_urb_size = min_t(size_t, 4096, data->rx_urb_size); + + dev->net->hard_header_len += SIERRA_NET_HIP_EXT_HDR_LEN; + dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; + + /* Set up the netdev */ + dev->net->flags |= IFF_NOARP; + dev->net->ethtool_ops = &sierra_net_ethtool_ops; + netif_carrier_off(dev->net); + + sierra_net_set_private(dev, priv); + + priv->kevent_flags = 0; + + /* Use the shared workqueue */ + INIT_WORK(&priv->sierra_net_kevent, sierra_net_kevent); + + /* Only need to do this once */ + init_timer(&priv->sync_timer); + + /* verify fw attributes */ + status = sierra_net_get_fw_attr(dev, &fwattr); + dev_dbg(&dev->udev->dev, "Fw attr: %x\n", fwattr); + + /* test whether firmware supports DHCP */ + if (!(status == sizeof(fwattr) && (fwattr & SWI_GET_FW_ATTR_MASK))) { + /* found incompatible firmware version */ + dev_err(&dev->udev->dev, "Incompatible driver and firmware" + " versions\n"); + kfree(priv); + return -ENODEV; + } + /* prepare sync message from template */ + memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg)); + + return 0; +} + +static void sierra_net_unbind(struct usbnet *dev, struct usb_interface *intf) +{ + int status; + struct sierra_net_data *priv = sierra_net_get_private(dev); + + dev_dbg(&dev->udev->dev, "%s", __func__); + + /* Kill the timer then flush the work queue */ + del_timer_sync(&priv->sync_timer); + + flush_scheduled_work(); + + /* tell modem we are going away */ + status = sierra_net_send_cmd(dev, priv->shdwn_msg, + sizeof(priv->shdwn_msg), "Shutdown"); + if (status < 0) + netdev_err(dev->net, + "usb_control_msg failed, status %d\n", status); + + sierra_net_set_private(dev, NULL); + + kfree(priv); +} + +static struct sk_buff *sierra_net_skb_clone(struct usbnet *dev, + struct sk_buff *skb, int len) +{ + struct sk_buff *new_skb; + + /* clone skb */ + new_skb = skb_clone(skb, GFP_ATOMIC); + + /* remove len bytes from original */ + skb_pull(skb, len); + + /* trim next packet to it's length */ + if (new_skb) { + skb_trim(new_skb, len); + } else { + if (netif_msg_rx_err(dev)) + netdev_err(dev->net, "failed to get skb\n"); + dev->net->stats.rx_dropped++; + } + + return new_skb; +} + +/* ---------------------------- Receive data path ----------------------*/ +static int sierra_net_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + int err; + struct hip_hdr hh; + struct sk_buff *new_skb; + + dev_dbg(&dev->udev->dev, "%s", __func__); + + /* could contain multiple packets */ + while (likely(skb->len)) { + err = parse_hip(skb->data, skb->len, &hh); + if (err) { + if (netif_msg_rx_err(dev)) + netdev_err(dev->net, "Invalid HIP header %d\n", + err); + /* dev->net->stats.rx_errors incremented by caller */ + dev->net->stats.rx_length_errors++; + return 0; + } + + /* Validate Extended HIP header */ + if (!hh.extmsgid.is_present + || hh.extmsgid.word != SIERRA_NET_HIP_EXT_IP_IN_ID) { + if (netif_msg_rx_err(dev)) + netdev_err(dev->net, "HIP/ETH: Invalid pkt\n"); + + dev->net->stats.rx_frame_errors++; + /* dev->net->stats.rx_errors incremented by caller */; + return 0; + } + + skb_pull(skb, hh.hdrlen); + + /* We are going to accept this packet, prepare it */ + memcpy(skb->data, sierra_net_get_private(dev)->ethr_hdr_tmpl, + ETH_HLEN); + + /* Last packet in batch handled by usbnet */ + if (hh.payload_len.word == skb->len) + return 1; + + new_skb = sierra_net_skb_clone(dev, skb, hh.payload_len.word); + if (new_skb) + usbnet_skb_return(dev, new_skb); + + } /* while */ + + return 0; +} + +/* ---------------------------- Transmit data path ----------------------*/ +struct sk_buff *sierra_net_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + struct sierra_net_data *priv = sierra_net_get_private(dev); + u16 len; + bool need_tail; + + dev_dbg(&dev->udev->dev, "%s", __func__); + if (priv->link_up && check_ethip_packet(skb, dev) && is_ip(skb)) { + /* enough head room as is? */ + if (SIERRA_NET_HIP_EXT_HDR_LEN <= skb_headroom(skb)) { + /* Save the Eth/IP length and set up HIP hdr */ + len = skb->len; + skb_push(skb, SIERRA_NET_HIP_EXT_HDR_LEN); + /* Handle ZLP issue */ + need_tail = ((len + SIERRA_NET_HIP_EXT_HDR_LEN) + % dev->maxpacket == 0); + if (need_tail) { + if (unlikely(skb_tailroom(skb) == 0)) { + netdev_err(dev->net, "tx_fixup:" + "no room for packet\n"); + dev_kfree_skb_any(skb); + return NULL; + } else { + skb->data[skb->len] = 0; + __skb_put(skb, 1); + len = len + 1; + } + } + build_hip(skb->data, len, priv); + return skb; + } else { + /* + * compensate in the future if necessary + */ + netdev_err(dev->net, "tx_fixup: no room for HIP\n"); + } /* headroom */ + } + + if (!priv->link_up) + dev->net->stats.tx_carrier_errors++; + + /* tx_dropped incremented by usbnet */ + + /* filter the packet out, release it */ + dev_kfree_skb_any(skb); + return NULL; +} + +static const u8 sierra_net_ifnum_list[] = { 7, 10, 11 }; +static const struct sierra_net_info_data sierra_net_info_data_68A3 = { + .rx_urb_size = 8 * 1024, + .whitelist = { + .infolen = ARRAY_SIZE(sierra_net_ifnum_list), + .ifaceinfo = sierra_net_ifnum_list + } +}; + +static const struct driver_info sierra_net_info_68A3 = { + .description = "Sierra Wireless USB-to-WWAN Modem", + .flags = FLAG_WWAN | FLAG_SEND_ZLP, + .bind = sierra_net_bind, + .unbind = sierra_net_unbind, + .status = sierra_net_status, + .rx_fixup = sierra_net_rx_fixup, + .tx_fixup = sierra_net_tx_fixup, + .data = (unsigned long)&sierra_net_info_data_68A3, +}; + +static const struct usb_device_id products[] = { + {USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */ + .driver_info = (unsigned long) &sierra_net_info_68A3}, + + {}, /* last item */ +}; +MODULE_DEVICE_TABLE(usb, products); + +/* We are based on usbnet, so let it handle the USB driver specifics */ +static struct usb_driver sierra_net_driver = { + .name = "sierra_net", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, + .no_dynamic_id = 1, +}; + +static int __init sierra_net_init(void) +{ + BUILD_BUG_ON(FIELD_SIZEOF(struct usbnet, data) + < sizeof(struct cdc_state)); + + return usb_register(&sierra_net_driver); +} + +static void __exit sierra_net_exit(void) +{ + usb_deregister(&sierra_net_driver); +} + +module_exit(sierra_net_exit); +module_init(sierra_net_init); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 4b83c330b4d38e869111bda6e9077d4f61ed974a Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 7 Apr 2010 15:33:44 +0000 Subject: powerpc/numa: Add form 1 NUMA affinity Firmware changed the way it represents memory and cpu affinity on POWER7. Unfortunately the old method now caps the topology to work around issues with legacy operating systems. For Linux to get the correct topology we need to use the new form 1 affinity information. We set the form 1 field in the client architecture, and if we see "1" in the ibm,associativity-form property firmware supports form 1 affinity and we should look at the first field in the ibm,associativity-reference-points array. If not we use the second field as we always have. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 5f306c4..97d4bd9 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -653,6 +653,7 @@ static void __init early_cmdline_parse(void) #else #define OV5_CMO 0x00 #endif +#define OV5_TYPE1_AFFINITY 0x80 /* Type 1 NUMA affinity */ /* Option Vector 6: IBM PAPR hints */ #define OV6_LINUX 0x02 /* Linux is our OS */ @@ -706,7 +707,7 @@ static unsigned char ibm_architecture_vec[] = { OV5_DONATE_DEDICATE_CPU | OV5_MSI, 0, OV5_CMO, - 0, + OV5_TYPE1_AFFINITY, 0, 0, 0, diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 64c0022..eaa7633 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -242,10 +242,11 @@ EXPORT_SYMBOL_GPL(of_node_to_nid); */ static int __init find_min_common_depth(void) { - int depth; + int depth, index; const unsigned int *ref_points; struct device_node *rtas_root; unsigned int len; + struct device_node *options; rtas_root = of_find_node_by_path("/rtas"); @@ -258,11 +259,23 @@ static int __init find_min_common_depth(void) * configuration (should be all 0's) and the second is for a normal * NUMA configuration. */ + index = 1; ref_points = of_get_property(rtas_root, "ibm,associativity-reference-points", &len); + /* + * For type 1 affinity information we want the first field + */ + options = of_find_node_by_path("/options"); + if (options) { + const char *str; + str = of_get_property(options, "ibm,associativity-form", NULL); + if (str && !strcmp(str, "1")) + index = 0; + } + if ((len >= 2 * sizeof(unsigned int)) && ref_points) { - depth = ref_points[1]; + depth = ref_points[index]; } else { dbg("NUMA: ibm,associativity-reference-points not found.\n"); depth = -1; -- cgit v0.10.2 From b4a26be9f6f8bb72998e445cc75fc6dc0c29513a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 6 Apr 2010 15:03:40 +0000 Subject: powerpc/pseries: Flush lazy kernel mappings after unplug operations This ensures that the translations for unmapped IO mappings or unmapped memory are properly removed from the MMU hash table before such an unplug. Without this, the hypervisor refuses the unplug operations due to those resources still being mapped by the partition. Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index 9b21ee6..01e7b5b 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -11,6 +11,7 @@ #include #include +#include #include #include #include @@ -54,6 +55,12 @@ static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size) */ start = (unsigned long)__va(base); ret = remove_section_mapping(start, start + lmb_size); + + /* Ensure all vmalloc mappings are flushed in case they also + * hit that section of memory + */ + vm_unmap_aliases(); + return ret; } diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c index 4e3e038..0830347 100644 --- a/drivers/pci/hotplug/rpadlpar_core.c +++ b/drivers/pci/hotplug/rpadlpar_core.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -430,6 +431,8 @@ int dlpar_remove_slot(char *drc_name) rc = dlpar_remove_pci_slot(drc_name, dn); break; } + vm_unmap_aliases(); + printk(KERN_INFO "%s: slot %s removed\n", DLPAR_MODULE_NAME, drc_name); exit: mutex_unlock(&rpadlpar_mutex); diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index 7197022..ef7411c 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -29,6 +29,7 @@ #include #include #include +#include #include /* for eeh_add_device() */ #include /* rtas_call */ #include /* for pci_controller */ @@ -418,6 +419,8 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) return -EINVAL; pcibios_remove_pci_devices(slot->bus); + vm_unmap_aliases(); + slot->state = NOT_CONFIGURED; return 0; } -- cgit v0.10.2 From b809b9ca3e6b47561514ae9767177cc482e90fc6 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 15 Apr 2010 09:11:34 +0000 Subject: powerpc/ps3: Update platform maintainer Update the PS3 entries in the MAINTAINERS file. Signed-off-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt diff --git a/MAINTAINERS b/MAINTAINERS index a0e3c3a..66ed1af 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4482,17 +4482,17 @@ S: Maintained F: drivers/ata/sata_promise.* PS3 NETWORK SUPPORT -M: Geoff Levand +M: Geoff Levand L: netdev@vger.kernel.org L: cbe-oss-dev@ozlabs.org -S: Supported +S: Maintained F: drivers/net/ps3_gelic_net.* PS3 PLATFORM SUPPORT -M: Geoff Levand +M: Geoff Levand L: linuxppc-dev@ozlabs.org L: cbe-oss-dev@ozlabs.org -S: Supported +S: Maintained F: arch/powerpc/boot/ps3* F: arch/powerpc/include/asm/lv1call.h F: arch/powerpc/include/asm/ps3*.h -- cgit v0.10.2 From 76ad4b8ebd5c68c8bf490bdb1fb4dcbc266e5223 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 15 Apr 2010 09:11:39 +0000 Subject: powerpc/ps3: Update ps3_defconfig Refresh ps3_defconfig to latest kernel sources and change these kernel config options: o CONFIG_USB_ANNOUNCE_NEW_DEVICES: n -> y o CONFIG_USB_EHCI_TT_NEWSCHED: n -> y o CONFIG_CMDLINE_BOOL: n -> y o CONFIG_CMDLINE: n -> "" Signed-off-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index 32f7058..3808bc2 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc7 -# Mon Aug 24 17:38:50 2009 +# Linux kernel version: 2.6.34-rc4 +# Thu Apr 15 11:32:15 2010 # CONFIG_PPC64=y @@ -9,6 +9,7 @@ CONFIG_PPC64=y # Processor support # CONFIG_PPC_BOOK3S_64=y +# CONFIG_PPC_BOOK3E_64 is not set CONFIG_PPC_BOOK3S=y # CONFIG_POWER4_ONLY is not set CONFIG_POWER3=y @@ -35,7 +36,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -60,6 +63,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y @@ -86,14 +90,15 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -108,6 +113,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -128,21 +134,19 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -154,12 +158,14 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y +# CONFIG_SLOW_WORK_DEBUG is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -180,14 +186,41 @@ CONFIG_BLOCK_COMPAT=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -226,7 +259,6 @@ CONFIG_PPC_CELL=y # CONFIG_SPU_FS=m CONFIG_SPU_FS_64K_LS=y -# CONFIG_SPU_TRACE is not set CONFIG_SPU_BASE=y # CONFIG_PQ2ADS is not set # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set @@ -267,7 +299,6 @@ CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y -# CONFIG_IOMMU_VMERGE is not set CONFIG_IOMMU_HELPER=y # CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -276,12 +307,15 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_SPARSE_IRQ=y # CONFIG_NUMA is not set +CONFIG_MAX_ACTIVE_REGIONS=256 CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -295,13 +329,12 @@ CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y # CONFIG_MEMORY_HOTREMOVE is not set CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_MEMORY_PROBE=y CONFIG_PPC_HAS_HASH_64K=y @@ -312,11 +345,15 @@ CONFIG_PPC_4K_PAGES=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" CONFIG_EXTRA_TARGETS="" CONFIG_PM=y CONFIG_PM_DEBUG=y +# CONFIG_PM_ADVANCED_DEBUG is not set # CONFIG_PM_VERBOSE is not set +# CONFIG_HIBERNATION is not set +# CONFIG_PM_RUNTIME is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -324,6 +361,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set @@ -337,12 +375,12 @@ CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y # # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -392,6 +430,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -400,6 +439,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -422,7 +462,6 @@ CONFIG_IPV6_NDISC_NODETYPE=y # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set @@ -445,27 +484,30 @@ CONFIG_BT_HCIBTUSB=m # CONFIG_BT_HCIBPA10X is not set # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +# CONFIG_BT_ATH3K is not set # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_DEBUGFS is not set -# CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_WEXT=y # CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_LIB80211 is not set CONFIG_MAC80211=m -CONFIG_MAC80211_DEFAULT_PS=y -CONFIG_MAC80211_DEFAULT_PS_VALUE=1 - -# -# Rate control algorithm selection -# CONFIG_MAC80211_RC_PID=y # CONFIG_MAC80211_RC_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT_PID=y # CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set # CONFIG_MAC80211_LEDS is not set # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_MENU is not set @@ -481,6 +523,7 @@ CONFIG_MAC80211_RC_DEFAULT="pid" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -491,6 +534,8 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -498,6 +543,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -521,6 +570,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -590,30 +640,27 @@ CONFIG_MII=m # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_NETDEV_1000=y CONFIG_GELIC_NET=y CONFIG_GELIC_WIRELESS=y # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -# CONFIG_LIBERTAS is not set +CONFIG_WLAN=y # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AT76C50X_USB is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8187 is not set # CONFIG_MAC80211_HWSIM is not set -# CONFIG_P54_COMMON is not set -# CONFIG_AR9170_USB is not set -# CONFIG_HOSTAP is not set +# CONFIG_ATH_COMMON is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set -# CONFIG_ZD1211RW is not set +# CONFIG_HOSTAP is not set +# CONFIG_LIBERTAS is not set +# CONFIG_P54_COMMON is not set # CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_ZD1211RW is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -631,6 +678,7 @@ CONFIG_USB_NET_AX8817X=m # CONFIG_USB_NET_CDCETHER is not set # CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC75XX is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set # CONFIG_USB_NET_NET1080 is not set @@ -665,6 +713,7 @@ CONFIG_SLHC=m CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -712,6 +761,8 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -735,7 +786,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -841,13 +891,13 @@ CONFIG_SND_PS3=m CONFIG_SND_PS3_DEFAULT_START_DELAY=2000 CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y # @@ -866,6 +916,7 @@ CONFIG_USB_HIDDEV=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set # CONFIG_HID_A4TECH is not set CONFIG_HID_APPLE=m CONFIG_HID_BELKIN=m @@ -876,17 +927,24 @@ CONFIG_HID_CHERRY=m CONFIG_HID_EZKEY=m # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +CONFIG_HID_TWINHAN=m # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=m # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +# CONFIG_HID_MAGICMOUSE is not set CONFIG_HID_MICROSOFT=m +# CONFIG_HID_MOSART is not set # CONFIG_HID_MONTEREY is not set # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set +# CONFIG_HID_QUANTA is not set # CONFIG_HID_SAMSUNG is not set CONFIG_HID_SONY=m +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=m # CONFIG_HID_GREENASIA is not set CONFIG_HID_SMARTJOYPLUS=m @@ -901,7 +959,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options @@ -909,7 +967,6 @@ CONFIG_USB=m CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set @@ -923,12 +980,13 @@ CONFIG_USB_MON=m # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_EHCI_HCD_PPC_OF is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -995,7 +1053,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1008,7 +1065,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1048,7 +1104,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1077,10 +1135,10 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_EXT4_FS=y -# CONFIG_EXT4DEV_COMPAT is not set CONFIG_EXT4_FS_XATTR=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y @@ -1093,6 +1151,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1154,6 +1213,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1164,7 +1224,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1181,6 +1240,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set @@ -1237,7 +1297,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_BINARY_PRINTF=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1270,6 +1330,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1292,6 +1353,7 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y +# CONFIG_PROVE_RCU is not set CONFIG_LOCKDEP=y # CONFIG_LOCK_STAT is not set CONFIG_DEBUG_LOCKDEP=y @@ -1308,26 +1370,27 @@ CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_TRACING=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1352,13 +1415,16 @@ CONFIG_IRQSTACKS=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1374,6 +1440,7 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1402,11 +1469,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_GHASH=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m -- cgit v0.10.2 From 33f60e9640b2f60dde6735293d4aa5ecc5b1d5d5 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 28 Apr 2010 09:20:33 +0200 Subject: coda: move backing-dev.h kernel include inside __KERNEL__ Otherwise we must export backing-dev.h as well, which doesn't make any sense. Signed-off-by: Jens Axboe diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h index 644062e8..8859e2e 100644 --- a/include/linux/coda_psdev.h +++ b/include/linux/coda_psdev.h @@ -1,13 +1,14 @@ #ifndef __CODA_PSDEV_H #define __CODA_PSDEV_H -#include #include #define CODA_PSDEV_MAJOR 67 #define MAX_CODADEVS 5 /* how many do we allow */ #ifdef __KERNEL__ +#include + struct kstatfs; /* communication pending/processing queues */ -- cgit v0.10.2 From 4b99fef02510706a73c8400045b4c72514e581c4 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Tue, 6 Apr 2010 06:19:15 -0400 Subject: regulator: fix enabling regulator issue on max8925 Fix regulator enabling issue that is caused by typo error in is_enabled(). Signed-off-by: Haojian Zhuang Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/max8925-regulator.c b/drivers/regulator/max8925-regulator.c index b6218f1..552cad8 100644 --- a/drivers/regulator/max8925-regulator.c +++ b/drivers/regulator/max8925-regulator.c @@ -109,7 +109,7 @@ static int max8925_is_enabled(struct regulator_dev *rdev) struct max8925_regulator_info *info = rdev_get_drvdata(rdev); int ret; - ret = max8925_reg_read(info->i2c, info->vol_reg); + ret = max8925_reg_read(info->i2c, info->enable_reg); if (ret < 0) return ret; -- cgit v0.10.2 From 48728e077480910df45baabc5f87b04276348c90 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 27 Apr 2010 14:45:43 -0600 Subject: x86/PCI: compute Address Space length rather than using _LEN ACPI _CRS Address Space Descriptors have _MIN, _MAX, and _LEN. Linux has been computing Address Spaces as [_MIN to _MIN + _LEN - 1]. Based on the tests in the bug reports below, Windows apparently uses [_MIN to _MAX]. Per spec (ACPI 4.0, Table 6-40), for _CRS fixed-size, fixed location descriptors, "_LEN must be (_MAX - _MIN + 1)", and when that's true, it doesn't matter which way we compute the end. But of course, there are BIOSes that don't follow this rule, and we're better off if Linux handles those exceptions the same way as Windows. This patch makes Linux use [_MIN to _MAX], as Windows seems to do. This effectively reverts d558b483d5 and 03db42adfe and replaces them with simpler code. https://bugzilla.kernel.org/show_bug.cgi?id=14337 (round) https://bugzilla.kernel.org/show_bug.cgi?id=15480 (truncate) Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 44f83ce..31930fd 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -121,30 +121,6 @@ count_resource(struct acpi_resource *acpi_res, void *data) return AE_OK; } -static void -align_resource(struct acpi_device *bridge, struct resource *res) -{ - int align = (res->flags & IORESOURCE_MEM) ? 16 : 4; - - /* - * Host bridge windows are not BARs, but the decoders on the PCI side - * that claim this address space have starting alignment and length - * constraints, so fix any obvious BIOS goofs. - */ - if (!IS_ALIGNED(res->start, align)) { - dev_printk(KERN_DEBUG, &bridge->dev, - "host bridge window %pR invalid; " - "aligning start to %d-byte boundary\n", res, align); - res->start &= ~(align - 1); - } - if (!IS_ALIGNED(res->end + 1, align)) { - dev_printk(KERN_DEBUG, &bridge->dev, - "host bridge window %pR invalid; " - "aligning end to %d-byte boundary\n", res, align); - res->end = ALIGN(res->end, align) - 1; - } -} - static acpi_status setup_resource(struct acpi_resource *acpi_res, void *data) { @@ -154,7 +130,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data) acpi_status status; unsigned long flags; struct resource *root, *conflict; - u64 start, end, max_len; + u64 start, end; status = resource_to_addr(acpi_res, &addr); if (!ACPI_SUCCESS(status)) @@ -171,19 +147,8 @@ setup_resource(struct acpi_resource *acpi_res, void *data) } else return AE_OK; - max_len = addr.maximum - addr.minimum + 1; - if (addr.address_length > max_len) { - dev_printk(KERN_DEBUG, &info->bridge->dev, - "host bridge window length %#llx doesn't fit in " - "%#llx-%#llx, trimming\n", - (unsigned long long) addr.address_length, - (unsigned long long) addr.minimum, - (unsigned long long) addr.maximum); - addr.address_length = max_len; - } - start = addr.minimum + addr.translation_offset; - end = start + addr.address_length - 1; + end = addr.maximum + addr.translation_offset; res = &info->res[info->res_num]; res->name = info->name; @@ -191,7 +156,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data) res->start = start; res->end = end; res->child = NULL; - align_resource(info->bridge, res); if (!pci_use_crs) { dev_printk(KERN_DEBUG, &info->bridge->dev, -- cgit v0.10.2 From acf82b85a70f39786e3cbb1ffed8655bcc972424 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 22 Apr 2010 11:28:39 +0200 Subject: nfs: fix some issues in nfs41_proc_reclaim_complete() The original code passed an ERR_PTR() to rpc_put_task() and instead of returning zero on success it returned -ENOMEM. Signed-off-by: Dan Carpenter Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 6380670..071fced 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -5218,9 +5218,12 @@ static int nfs41_proc_reclaim_complete(struct nfs_client *clp) msg.rpc_resp = &calldata->res; task_setup_data.callback_data = calldata; task = rpc_run_task(&task_setup_data); - if (IS_ERR(task)) + if (IS_ERR(task)) { status = PTR_ERR(task); + goto out; + } rpc_put_task(task); + return 0; out: dprintk("<-- %s status=%d\n", __func__, status); return status; -- cgit v0.10.2 From 9699eda6bc1f708a28acb716e1477aa351362fe2 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Thu, 22 Apr 2010 18:56:17 +0800 Subject: nfs: fix memory leak in nfs_get_sb with CONFIG_NFS_V4 With CONFIG_NFS_V4 and data version 4, nfs_get_sb will allocate memory for export_path in nfs4_validate_text_mount_data, so we need to free it then. This is addressed in following kmemleak report: unreferenced object 0xffff88016bf48a50 (size 16): comm "mount.nfs", pid 22567, jiffies 4651574704 (age 175471.200s) hex dump (first 16 bytes): 2f 6f 70 74 2f 77 6f 72 6b 00 6b 6b 6b 6b 6b a5 /opt/work.kkkkk. backtrace: [] kmemleak_alloc+0x60/0xa7 [] kmemleak_alloc_recursive.clone.5+0x1b/0x1d [] __kmalloc_track_caller+0x18f/0x1b7 [] kstrndup+0x37/0x54 [] nfs_parse_devname+0x152/0x204 [nfs] [] nfs4_validate_text_mount_data+0xd0/0xdc [nfs] [] nfs_get_sb+0x325/0x736 [nfs] [] vfs_kern_mount+0xbd/0x17c [] do_kern_mount+0x4d/0xed [] do_mount+0x787/0x7fe [] sys_mount+0x88/0xc2 [] system_call_fastpath+0x16/0x1b Signed-off-by: Xiaotian Feng Cc: Trond Myklebust Cc: Chuck Lever Cc: Benny Halevy Cc: Al Viro Cc: Andy Adamson Signed-off-by: Trond Myklebust diff --git a/fs/nfs/super.c b/fs/nfs/super.c index f9327bb..b4148fc 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2187,6 +2187,7 @@ static int nfs_get_sb(struct file_system_type *fs_type, if (data->version == 4) { error = nfs4_try_mount(flags, dev_name, data, mnt); kfree(data->client_address); + kfree(data->nfs_server.export_path); goto out; } #endif /* CONFIG_NFS_V4 */ -- cgit v0.10.2 From 8d238b25b1ec22a73b1c2206f111df2faaff8285 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 28 Apr 2010 11:25:59 -0700 Subject: Revert "tcp: bind() fix when many ports are bound" This reverts two commits: fda48a0d7a8412cedacda46a9c0bf8ef9cd13559 tcp: bind() fix when many ports are bound and a follow-on fix for it: 6443bb1fc2050ca2b6585a3fa77f7833b55329ed ipv6: Fix inet6_csk_bind_conflict() It causes problems with binding listening sockets when time-wait sockets from a previous instance still are alive. It's too late to keep fiddling with this so late in the -rc series, and we'll deal with it in net-next-2.6 instead. Signed-off-by: David S. Miller diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index 14825eb..8da6429 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -70,17 +70,13 @@ int inet_csk_bind_conflict(const struct sock *sk, (!sk->sk_bound_dev_if || !sk2->sk_bound_dev_if || sk->sk_bound_dev_if == sk2->sk_bound_dev_if)) { - const __be32 sk2_rcv_saddr = inet_rcv_saddr(sk2); - if (!reuse || !sk2->sk_reuse || sk2->sk_state == TCP_LISTEN) { + const __be32 sk2_rcv_saddr = inet_rcv_saddr(sk2); if (!sk2_rcv_saddr || !sk_rcv_saddr || sk2_rcv_saddr == sk_rcv_saddr) break; - } else if (reuse && sk2->sk_reuse && - sk2_rcv_saddr && - sk2_rcv_saddr == sk_rcv_saddr) - break; + } } } return node != NULL; @@ -124,11 +120,9 @@ again: smallest_size = tb->num_owners; smallest_rover = rover; if (atomic_read(&hashinfo->bsockets) > (high - low) + 1) { - if (!inet_csk(sk)->icsk_af_ops->bind_conflict(sk, tb)) { - spin_unlock(&head->lock); - snum = smallest_rover; - goto have_snum; - } + spin_unlock(&head->lock); + snum = smallest_rover; + goto have_snum; } } goto next; diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c index 3a4d92b..628db24 100644 --- a/net/ipv6/inet6_connection_sock.c +++ b/net/ipv6/inet6_connection_sock.c @@ -42,16 +42,11 @@ int inet6_csk_bind_conflict(const struct sock *sk, if (sk != sk2 && (!sk->sk_bound_dev_if || !sk2->sk_bound_dev_if || - sk->sk_bound_dev_if == sk2->sk_bound_dev_if)) { - if ((!sk->sk_reuse || !sk2->sk_reuse || - sk2->sk_state == TCP_LISTEN) && - ipv6_rcv_saddr_equal(sk, sk2)) - break; - else if (sk->sk_reuse && sk2->sk_reuse && - !ipv6_addr_any(inet6_rcv_saddr(sk)) && - ipv6_rcv_saddr_equal(sk, sk2)) - break; - } + sk->sk_bound_dev_if == sk2->sk_bound_dev_if) && + (!sk->sk_reuse || !sk2->sk_reuse || + sk2->sk_state == TCP_LISTEN) && + ipv6_rcv_saddr_equal(sk, sk2)) + break; } return node != NULL; -- cgit v0.10.2 From 561b1733a465cf9677356b40c27653dd45f1ac56 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 28 Apr 2010 08:47:18 +0000 Subject: sctp: avoid irq lock inversion while call sk->sk_data_ready() sk->sk_data_ready() of sctp socket can be called from both BH and non-BH contexts, but the default sk->sk_data_ready(), sock_def_readable(), can not be used in this case. Therefore, we have to make a new function sctp_data_ready() to grab sk->sk_data_ready() with BH disabling. ========================================================= [ INFO: possible irq lock inversion dependency detected ] 2.6.33-rc6 #129 --------------------------------------------------------- sctp_darn/1517 just changed the state of lock: (clock-AF_INET){++.?..}, at: [] sock_def_readable+0x20/0x80 but this lock took another, SOFTIRQ-unsafe lock in the past: (slock-AF_INET){+.-...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: 1 lock held by sctp_darn/1517: #0: (sk_lock-AF_INET){+.+.+.}, at: [] sctp_sendmsg+0x23d/0xc00 [sctp] Signed-off-by: Wei Yongjun Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index 78740ec..fa6cde5 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -128,6 +128,7 @@ extern int sctp_register_pf(struct sctp_pf *, sa_family_t); int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb); int sctp_inet_listen(struct socket *sock, int backlog); void sctp_write_space(struct sock *sk); +void sctp_data_ready(struct sock *sk, int len); unsigned int sctp_poll(struct file *file, struct socket *sock, poll_table *wait); void sctp_sock_rfree(struct sk_buff *skb); diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c index 905fda5..7ec09ba 100644 --- a/net/sctp/endpointola.c +++ b/net/sctp/endpointola.c @@ -144,6 +144,7 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep, /* Use SCTP specific send buffer space queues. */ ep->sndbuf_policy = sctp_sndbuf_policy; + sk->sk_data_ready = sctp_data_ready; sk->sk_write_space = sctp_write_space; sock_set_flag(sk, SOCK_USE_WRITE_QUEUE); diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 007e8ba..efa2bc3 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -6189,6 +6189,16 @@ do_nonblock: goto out; } +void sctp_data_ready(struct sock *sk, int len) +{ + read_lock_bh(&sk->sk_callback_lock); + if (sk_has_sleeper(sk)) + wake_up_interruptible_sync_poll(sk->sk_sleep, POLLIN | + POLLRDNORM | POLLRDBAND); + sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_IN); + read_unlock_bh(&sk->sk_callback_lock); +} + /* If socket sndbuf has changed, wake up all per association waiters. */ void sctp_write_space(struct sock *sk) { -- cgit v0.10.2 From 0c42749cffbb4a06be86c5e5db6c7ebad548781f Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 28 Apr 2010 08:47:19 +0000 Subject: sctp: fix potential reference of a freed pointer When sctp attempts to update an assocition, it removes any addresses that were not in the updated INITs. However, the loop may attempt to refrence a transport with address after removing it. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/associola.c b/net/sctp/associola.c index df5abbf..99c93ee 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -1194,8 +1194,10 @@ void sctp_assoc_update(struct sctp_association *asoc, /* Remove any peer addresses not present in the new association. */ list_for_each_safe(pos, temp, &asoc->peer.transport_addr_list) { trans = list_entry(pos, struct sctp_transport, transports); - if (!sctp_assoc_lookup_paddr(new, &trans->ipaddr)) - sctp_assoc_del_peer(asoc, &trans->ipaddr); + if (!sctp_assoc_lookup_paddr(new, &trans->ipaddr)) { + sctp_assoc_rm_peer(asoc, trans); + continue; + } if (asoc->state >= SCTP_STATE_ESTABLISHED) sctp_transport_reset(trans); -- cgit v0.10.2 From 81419d862db743fe4450a021893f24bab4698c1d Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 28 Apr 2010 08:47:20 +0000 Subject: sctp: per_cpu variables should be in bh_disabled section Since the change of the atomics to percpu variables, we now have to disable BH in process context when touching percpu variables. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/socket.c b/net/sctp/socket.c index efa2bc3..44a1ab0 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -3719,12 +3719,12 @@ SCTP_STATIC int sctp_init_sock(struct sock *sk) sp->hmac = NULL; SCTP_DBG_OBJCNT_INC(sock); - percpu_counter_inc(&sctp_sockets_allocated); /* Set socket backlog limit. */ sk->sk_backlog.limit = sysctl_sctp_rmem[1]; local_bh_disable(); + percpu_counter_inc(&sctp_sockets_allocated); sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1); local_bh_enable(); @@ -3741,8 +3741,8 @@ SCTP_STATIC void sctp_destroy_sock(struct sock *sk) /* Release our hold on the endpoint. */ ep = sctp_sk(sk)->ep; sctp_endpoint_free(ep); - percpu_counter_dec(&sctp_sockets_allocated); local_bh_disable(); + percpu_counter_dec(&sctp_sockets_allocated); sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1); local_bh_enable(); } -- cgit v0.10.2 From a8170c35e738d62e9919ce5b109cf4ed66e95bde Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 28 Apr 2010 08:47:21 +0000 Subject: sctp: fix to calc the INIT/INIT-ACK chunk length correctly is set When calculating the INIT/INIT-ACK chunk length, we should not only account the length of parameters, but also the parameters zero padding length, such as AUTH HMACS parameter and CHUNKS parameter. Without the parameters zero padding length we may get following oops. skb_over_panic: text:ce2068d2 len:130 put:6 head:cac3fe00 data:cac3fe00 tail:0xcac3fe82 end:0xcac3fe80 dev: ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:127! invalid opcode: 0000 [#2] SMP last sysfs file: /sys/module/aes_generic/initstate Modules linked in: authenc ...... Pid: 4102, comm: sctp_darn Tainted: G D 2.6.34-rc2 #6 EIP: 0060:[] EFLAGS: 00010282 CPU: 0 EIP is at skb_over_panic+0x37/0x3e EAX: 00000078 EBX: c07c024b ECX: c07c02b9 EDX: cb607b78 ESI: 00000000 EDI: cac3fe7a EBP: 00000002 ESP: cb607b74 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process sctp_darn (pid: 4102, ti=cb607000 task=cabdc990 task.ti=cb607000) Stack: c07c02b9 ce2068d2 00000082 00000006 cac3fe00 cac3fe00 cac3fe82 cac3fe80 <0> c07c024b cac3fe7c cac3fe7a c0608dec ca986e80 ce2068d2 00000006 0000007a <0> cb8120ca ca986e80 cb812000 00000003 cb8120c4 ce208a25 cb8120ca cadd9400 Call Trace: [] ? sctp_addto_chunk+0x45/0x85 [sctp] [] ? skb_put+0x2e/0x32 [] ? sctp_addto_chunk+0x45/0x85 [sctp] [] ? sctp_make_init+0x279/0x28c [sctp] [] ? apic_timer_interrupt+0x2a/0x30 [] ? sctp_sf_do_prm_asoc+0x2b/0x7b [sctp] [] ? sctp_do_sm+0xa0/0x14a [sctp] [] ? sctp_pname+0x0/0x14 [sctp] [] ? sctp_primitive_ASSOCIATE+0x2b/0x31 [sctp] [] ? sctp_sendmsg+0x7a0/0x9eb [sctp] [] ? inet_sendmsg+0x3b/0x43 [] ? task_tick_fair+0x2d/0xd9 [] ? sock_sendmsg+0xa7/0xc1 [] ? smp_apic_timer_interrupt+0x6b/0x75 [] ? dequeue_task_fair+0x34/0x19b [] ? sched_clock_local+0x17/0x11e [] ? _copy_from_user+0x2b/0x10c [] ? verify_iovec+0x3c/0x6a [] ? sys_sendmsg+0x186/0x1e2 [] ? __wake_up_common+0x34/0x5b [] ? __wake_up+0x2c/0x3b [] ? tty_wakeup+0x43/0x47 [] ? remove_wait_queue+0x16/0x24 [] ? n_tty_read+0x5b8/0x65e [] ? default_wake_function+0x0/0x8 [] ? sys_socketcall+0x17f/0x1cd [] ? sysenter_do_call+0x12/0x22 Code: 0f 45 de 53 ff b0 98 00 00 00 ff b0 94 ...... EIP: [] skb_over_panic+0x37/0x3e SS:ESP 0068:cb607b74 To reproduce: # modprobe sctp # echo 1 > /proc/sys/net/sctp/addip_enable # echo 1 > /proc/sys/net/sctp/auth_enable # sctp_test -H 3ffe:501:ffff:100:20c:29ff:fe4d:f37e -P 800 -l # sctp_darn -H 3ffe:501:ffff:100:20c:29ff:fe4d:f37e -P 900 -h 192.168.0.21 -p 800 -I -s -t sctp_darn ready to send... 3ffe:501:ffff:100:20c:29ff:fe4d:f37e:900-192.168.0.21:800 Interactive mode> bindx-add=192.168.0.21 3ffe:501:ffff:100:20c:29ff:fe4d:f37e:900-192.168.0.21:800 Interactive mode> bindx-add=192.168.1.21 3ffe:501:ffff:100:20c:29ff:fe4d:f37e:900-192.168.0.21:800 Interactive mode> snd=10 ------------------------------------------------------------------ eth0 has addresses: 3ffe:501:ffff:100:20c:29ff:fe4d:f37e and 192.168.0.21 eth1 has addresses: 192.168.1.21 ------------------------------------------------------------------ Reported-by: George Cheimonidis Signed-off-by: Wei Yongjun Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index 17cb400e..f6fc5c1 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -208,7 +208,8 @@ struct sctp_chunk *sctp_make_init(const struct sctp_association *asoc, sp = sctp_sk(asoc->base.sk); num_types = sp->pf->supported_addrs(sp, types); - chunksize = sizeof(init) + addrs_len + SCTP_SAT_LEN(num_types); + chunksize = sizeof(init) + addrs_len; + chunksize += WORD_ROUND(SCTP_SAT_LEN(num_types)); chunksize += sizeof(ecap_param); if (sctp_prsctp_enable) @@ -238,14 +239,14 @@ struct sctp_chunk *sctp_make_init(const struct sctp_association *asoc, /* Add HMACS parameter length if any were defined */ auth_hmacs = (sctp_paramhdr_t *)asoc->c.auth_hmacs; if (auth_hmacs->length) - chunksize += ntohs(auth_hmacs->length); + chunksize += WORD_ROUND(ntohs(auth_hmacs->length)); else auth_hmacs = NULL; /* Add CHUNKS parameter length */ auth_chunks = (sctp_paramhdr_t *)asoc->c.auth_chunks; if (auth_chunks->length) - chunksize += ntohs(auth_chunks->length); + chunksize += WORD_ROUND(ntohs(auth_chunks->length)); else auth_chunks = NULL; @@ -255,7 +256,8 @@ struct sctp_chunk *sctp_make_init(const struct sctp_association *asoc, /* If we have any extensions to report, account for that */ if (num_ext) - chunksize += sizeof(sctp_supported_ext_param_t) + num_ext; + chunksize += WORD_ROUND(sizeof(sctp_supported_ext_param_t) + + num_ext); /* RFC 2960 3.3.2 Initiation (INIT) (1) * @@ -397,13 +399,13 @@ struct sctp_chunk *sctp_make_init_ack(const struct sctp_association *asoc, auth_hmacs = (sctp_paramhdr_t *)asoc->c.auth_hmacs; if (auth_hmacs->length) - chunksize += ntohs(auth_hmacs->length); + chunksize += WORD_ROUND(ntohs(auth_hmacs->length)); else auth_hmacs = NULL; auth_chunks = (sctp_paramhdr_t *)asoc->c.auth_chunks; if (auth_chunks->length) - chunksize += ntohs(auth_chunks->length); + chunksize += WORD_ROUND(ntohs(auth_chunks->length)); else auth_chunks = NULL; @@ -412,7 +414,8 @@ struct sctp_chunk *sctp_make_init_ack(const struct sctp_association *asoc, } if (num_ext) - chunksize += sizeof(sctp_supported_ext_param_t) + num_ext; + chunksize += WORD_ROUND(sizeof(sctp_supported_ext_param_t) + + num_ext); /* Now allocate and fill out the chunk. */ retval = sctp_make_chunk(asoc, SCTP_CID_INIT_ACK, 0, chunksize); -- cgit v0.10.2 From c0786693404cffd80ca3cb6e75ee7b35186b2825 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 28 Apr 2010 08:47:22 +0000 Subject: sctp: Fix oops when sending queued ASCONF chunks When we finish processing ASCONF_ACK chunk, we try to send the next queued ASCONF. This action runs the sctp state machine recursively and it's not prepared to do so. kernel BUG at kernel/timer.c:790! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/module/ipv6/initstate Modules linked in: sha256_generic sctp libcrc32c ipv6 dm_multipath uinput 8139too i2c_piix4 8139cp mii i2c_core pcspkr virtio_net joydev floppy virtio_blk virtio_pci [last unloaded: scsi_wait_scan] Pid: 0, comm: swapper Not tainted 2.6.34-rc4 #15 /Bochs EIP: 0060:[] EFLAGS: 00010286 CPU: 0 EIP is at add_timer+0xd/0x1b EAX: cecbab14 EBX: 000000f0 ECX: c0957b1c EDX: 03595cf4 ESI: cecba800 EDI: cf276f00 EBP: c0957aa0 ESP: c0957aa0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=c0956000 task=c0988ba0 task.ti=c0956000) Stack: c0957ae0 d1851214 c0ab62e4 c0ab5f26 0500ffff 00000004 00000005 00000004 <0> 00000000 d18694fd 00000004 1666b892 cecba800 cecba800 c0957b14 00000004 <0> c0957b94 d1851b11 ceda8b00 cecba800 cf276f00 00000001 c0957b14 000000d0 Call Trace: [] ? sctp_side_effects+0x607/0xdfc [sctp] [] ? sctp_do_sm+0x108/0x159 [sctp] [] ? sctp_pname+0x0/0x1d [sctp] [] ? sctp_primitive_ASCONF+0x36/0x3b [sctp] [] ? sctp_process_asconf_ack+0x2a4/0x2d3 [sctp] [] ? sctp_sf_do_asconf_ack+0x1dd/0x2b4 [sctp] [] ? sctp_do_sm+0xb8/0x159 [sctp] [] ? sctp_cname+0x0/0x52 [sctp] [] ? sctp_assoc_bh_rcv+0xac/0xe1 [sctp] [] ? sctp_inq_push+0x2d/0x30 [sctp] [] ? sctp_rcv+0x797/0x82e [sctp] Tested-by: Wei Yongjun Signed-off-by: Yuansong Qiao Signed-off-by: Shuaijun Zhang Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h index 8be5135..2c55a7e 100644 --- a/include/net/sctp/command.h +++ b/include/net/sctp/command.h @@ -107,6 +107,7 @@ typedef enum { SCTP_CMD_T1_RETRAN, /* Mark for retransmission after T1 timeout */ SCTP_CMD_UPDATE_INITTAG, /* Update peer inittag */ SCTP_CMD_SEND_MSG, /* Send the whole use message */ + SCTP_CMD_SEND_NEXT_ASCONF, /* Send the next ASCONF after ACK */ SCTP_CMD_LAST } sctp_verb_t; diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index f6fc5c1..0fd5b4c 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -3318,21 +3318,6 @@ int sctp_process_asconf_ack(struct sctp_association *asoc, sctp_chunk_free(asconf); asoc->addip_last_asconf = NULL; - /* Send the next asconf chunk from the addip chunk queue. */ - if (!list_empty(&asoc->addip_chunk_list)) { - struct list_head *entry = asoc->addip_chunk_list.next; - asconf = list_entry(entry, struct sctp_chunk, list); - - list_del_init(entry); - - /* Hold the chunk until an ASCONF_ACK is received. */ - sctp_chunk_hold(asconf); - if (sctp_primitive_ASCONF(asoc, asconf)) - sctp_chunk_free(asconf); - else - asoc->addip_last_asconf = asconf; - } - return retval; } diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 4c5bed9..d5ae450 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -962,6 +962,29 @@ static int sctp_cmd_send_msg(struct sctp_association *asoc, } +/* Sent the next ASCONF packet currently stored in the association. + * This happens after the ASCONF_ACK was succeffully processed. + */ +static void sctp_cmd_send_asconf(struct sctp_association *asoc) +{ + /* Send the next asconf chunk from the addip chunk + * queue. + */ + if (!list_empty(&asoc->addip_chunk_list)) { + struct list_head *entry = asoc->addip_chunk_list.next; + struct sctp_chunk *asconf = list_entry(entry, + struct sctp_chunk, list); + list_del_init(entry); + + /* Hold the chunk until an ASCONF_ACK is received. */ + sctp_chunk_hold(asconf); + if (sctp_primitive_ASCONF(asoc, asconf)) + sctp_chunk_free(asconf); + else + asoc->addip_last_asconf = asconf; + } +} + /* These three macros allow us to pull the debugging code out of the * main flow of sctp_do_sm() to keep attention focused on the real @@ -1617,6 +1640,9 @@ static int sctp_cmd_interpreter(sctp_event_t event_type, } error = sctp_cmd_send_msg(asoc, cmd->obj.msg); break; + case SCTP_CMD_SEND_NEXT_ASCONF: + sctp_cmd_send_asconf(asoc); + break; default: printk(KERN_WARNING "Impossible command: %u, %p\n", cmd->verb, cmd->obj.ptr); diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index abf601a..24b2cd5 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -3676,8 +3676,14 @@ sctp_disposition_t sctp_sf_do_asconf_ack(const struct sctp_endpoint *ep, SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO)); if (!sctp_process_asconf_ack((struct sctp_association *)asoc, - asconf_ack)) + asconf_ack)) { + /* Successfully processed ASCONF_ACK. We can + * release the next asconf if we have one. + */ + sctp_add_cmd_sf(commands, SCTP_CMD_SEND_NEXT_ASCONF, + SCTP_NULL()); return SCTP_DISPOSITION_CONSUME; + } abort = sctp_make_abort(asoc, asconf_ack, sizeof(sctp_errhdr_t)); -- cgit v0.10.2 From aabc5649078310094cbffb430fcbf9c25b6268f9 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 28 Apr 2010 09:00:35 +0000 Subject: sfc: Wait at most 10ms for the MC to finish reading out MAC statistics The original code would wait indefinitely if MAC stats DMA failed. Signed-off-by: Ben Hutchings Cc: stable@kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c index 38dcc42..e0c46f5 100644 --- a/drivers/net/sfc/siena.c +++ b/drivers/net/sfc/siena.c @@ -456,8 +456,17 @@ static int siena_try_update_nic_stats(struct efx_nic *efx) static void siena_update_nic_stats(struct efx_nic *efx) { - while (siena_try_update_nic_stats(efx) == -EAGAIN) - cpu_relax(); + int retry; + + /* If we're unlucky enough to read statistics wduring the DMA, wait + * up to 10ms for it to finish (typically takes <500us) */ + for (retry = 0; retry < 100; ++retry) { + if (siena_try_update_nic_stats(efx) == 0) + return; + udelay(100); + } + + /* Use the old values instead */ } static void siena_start_nic_stats(struct efx_nic *efx) -- cgit v0.10.2 From f49a4589e9e25ef525da449b1ce5597cb659bbb5 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 28 Apr 2010 09:01:33 +0000 Subject: sfc: Always close net device at the end of a disabling reset This fixes a regression introduced by commit eb9f6744cbfa97674c13263802259b5aa0034594 "sfc: Implement ethtool reset operation". Signed-off-by: Ben Hutchings Cc: stable@kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 6486657..649a264 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -1861,6 +1861,7 @@ out: } if (disabled) { + dev_close(efx->net_dev); EFX_ERR(efx, "has been disabled\n"); efx->state = STATE_DISABLED; } else { @@ -1884,8 +1885,7 @@ static void efx_reset_work(struct work_struct *data) } rtnl_lock(); - if (efx_reset(efx, efx->reset_pending)) - dev_close(efx->net_dev); + (void)efx_reset(efx, efx->reset_pending); rtnl_unlock(); } -- cgit v0.10.2 From e41c11ee0cc602bcde68916be85fb97d1a484324 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 28 Apr 2010 09:01:50 +0000 Subject: sfc: Change falcon_probe_board() to fail for unsupported boards The driver needs specific PHY and board support code for each SFC4000 board; there is no point trying to continue if it is missing. Currently unsupported boards can trigger an 'oops'. Signed-off-by: Ben Hutchings Cc: stable@kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index d294d66..08278e7 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -1320,7 +1320,9 @@ static int falcon_probe_nvconfig(struct efx_nic *efx) EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mdio.prtad); - falcon_probe_board(efx, board_rev); + rc = falcon_probe_board(efx, board_rev); + if (rc) + goto fail2; kfree(nvconfig); return 0; diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c index 5712fdd..c7a933a 100644 --- a/drivers/net/sfc/falcon_boards.c +++ b/drivers/net/sfc/falcon_boards.c @@ -728,15 +728,7 @@ static const struct falcon_board_type board_types[] = { }, }; -static const struct falcon_board_type falcon_dummy_board = { - .init = efx_port_dummy_op_int, - .init_phy = efx_port_dummy_op_void, - .fini = efx_port_dummy_op_void, - .set_id_led = efx_port_dummy_op_set_id_led, - .monitor = efx_port_dummy_op_int, -}; - -void falcon_probe_board(struct efx_nic *efx, u16 revision_info) +int falcon_probe_board(struct efx_nic *efx, u16 revision_info) { struct falcon_board *board = falcon_board(efx); u8 type_id = FALCON_BOARD_TYPE(revision_info); @@ -754,8 +746,9 @@ void falcon_probe_board(struct efx_nic *efx, u16 revision_info) (efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC) ? board->type->ref_model : board->type->gen_type, 'A' + board->major, board->minor); + return 0; } else { EFX_ERR(efx, "unknown board type %d\n", type_id); - board->type = &falcon_dummy_board; + return -ENODEV; } } diff --git a/drivers/net/sfc/nic.h b/drivers/net/sfc/nic.h index 9351c03..3166baf 100644 --- a/drivers/net/sfc/nic.h +++ b/drivers/net/sfc/nic.h @@ -156,7 +156,7 @@ extern struct efx_nic_type siena_a0_nic_type; ************************************************************************** */ -extern void falcon_probe_board(struct efx_nic *efx, u16 revision_info); +extern int falcon_probe_board(struct efx_nic *efx, u16 revision_info); /* TX data path */ extern int efx_nic_probe_tx(struct efx_tx_queue *tx_queue); -- cgit v0.10.2 From b56ba8aa6f3aeab23d3d4b1190ed1098463b2a9c Mon Sep 17 00:00:00 2001 From: Colin Tuckley Date: Wed, 24 Feb 2010 15:23:10 +0100 Subject: ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB The switch to using GPIOLIB broke the sd/mmc card detection on the RealView development boards if GPIO_PL061 was not selected. This patch selects GPIO_PL061 if GPIOLIB is selected. The sense of the return value from mmc_status has also changed and is corrected. Signed-off-by: Colin Tuckley Acked-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c5408bf..92622eb 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -253,6 +253,7 @@ config ARCH_REALVIEW select GENERIC_TIME select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select GPIO_PL061 if GPIOLIB help This enables support for ARM Ltd RealView boards. diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index f2dbce5..d5a9573 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -254,7 +254,7 @@ static unsigned int realview_mmc_status(struct device *dev) else mask = 2; - return readl(REALVIEW_SYSMCI) & mask; + return !(readl(REALVIEW_SYSMCI) & mask); } struct mmci_platform_data realview_mmc0_plat_data = { -- cgit v0.10.2 From d9e80b7de91db05c1c4d2e5ebbfd70b3b3ba0e0f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 29 Apr 2010 03:10:43 +0100 Subject: nfs d_revalidate() is too trigger-happy with d_drop() If dentry found stale happens to be a root of disconnected tree, we can't d_drop() it; its d_hash is actually part of s_anon and d_drop() would simply hide it from shrink_dcache_for_umount(), leading to all sorts of fun, including busy inodes on umount and oopsen after that. Bug had been there since at least 2006 (commit c636eb already has it), so it's definitely -stable fodder. Signed-off-by: Al Viro Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index be46f26..db3ad84 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -837,6 +837,8 @@ out_zap_parent: /* If we have submounts, don't unhash ! */ if (have_submounts(dentry)) goto out_valid; + if (dentry->d_flags & DCACHE_DISCONNECTED) + goto out_valid; shrink_dcache_parent(dentry); } d_drop(dentry); -- cgit v0.10.2 From a36fed12a4d980eebb2e67b87ea30ad090238cff Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 29 Apr 2010 13:38:00 +0300 Subject: exofs: Fix "add bdi backing to mount session" fall out Commit b3d0ab7e60d1865bb6f6a79a77aaba22f2543236 ("exofs: add bdi backing to mount session") has a bug in the placement of the bdi member at struct exofs_sb_info. The layout member must be kept last. Signed-off-by: Boaz Harrosh Acked-by: Jens Axboe Signed-off-by: Linus Torvalds diff --git a/fs/exofs/exofs.h b/fs/exofs/exofs.h index 5437327..22721b2 100644 --- a/fs/exofs/exofs.h +++ b/fs/exofs/exofs.h @@ -85,6 +85,7 @@ struct exofs_sb_info { u32 s_next_generation; /* next gen # to use */ atomic_t s_curr_pending; /* number of pending commands */ uint8_t s_cred[OSD_CAP_LEN]; /* credential for the fscb */ + struct backing_dev_info bdi; /* register our bdi with VFS */ struct pnfs_osd_data_map data_map; /* Default raid to use * FIXME: Needed ? @@ -93,7 +94,6 @@ struct exofs_sb_info { struct exofs_layout layout; /* Default files layout, * contains the variable osd_dev * array. Keep last */ - struct backing_dev_info bdi; struct osd_dev *_min_one_dev[1]; /* Place holder for one dev */ }; -- cgit v0.10.2 From f80a0ca6ad8f2800453e819dafa09a0ed9e56850 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 28 Apr 2010 14:36:41 +0200 Subject: pktcdvd: improve BKL and compat_ioctl.c usage The pktcdvd driver uses proper locking and does not need the BKL in the ioctl and llseek functions of the character device, so kill both. Moving the compat_ioctl handling from common code into the driver itself fixes build problems when CONFIG_BLOCK is disabled. Acked-by: Randy Dunlap Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index ddf1942..8a549db 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -48,6 +48,7 @@ #include #include #include +#include #include #include #include @@ -2984,7 +2985,7 @@ static void pkt_get_status(struct pkt_ctrl_command *ctrl_cmd) mutex_unlock(&ctl_mutex); } -static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long pkt_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; struct pkt_ctrl_command ctrl_cmd; @@ -3021,10 +3022,20 @@ static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cm return ret; } +#ifdef CONFIG_COMPAT +static long pkt_ctl_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + return pkt_ctl_ioctl(file, cmd, (unsigned long)compat_ptr(arg)); +} +#endif static const struct file_operations pkt_ctl_fops = { - .ioctl = pkt_ctl_ioctl, - .owner = THIS_MODULE, + .open = nonseekable_open, + .unlocked_ioctl = pkt_ctl_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = pkt_ctl_compat_ioctl, +#endif + .owner = THIS_MODULE, }; static struct miscdevice pkt_misc = { diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index c32a1b6..641640d 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -102,7 +102,6 @@ #include #include #include -#include #include @@ -1126,8 +1125,6 @@ COMPATIBLE_IOCTL(PPGETMODE) COMPATIBLE_IOCTL(PPGETPHASE) COMPATIBLE_IOCTL(PPGETFLAGS) COMPATIBLE_IOCTL(PPSETFLAGS) -/* pktcdvd */ -COMPATIBLE_IOCTL(PACKET_CTRL_CMD) /* Big A */ /* sparc only */ /* Big Q for sound/OSS */ -- cgit v0.10.2 From 5477d0face8a3ba4e9a1e7283692fff9c92f8e5e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 29 Apr 2010 20:33:35 +0200 Subject: fs: fs/super.c needs to include backing-dev.h for !CONFIG_BLOCK When CONFIG_BLOCK is set, it ends up getting backing-dev.h included. But for !CONFIG_BLOCK, it isn't so lucky. The proper thing to do is include directly from the file it's used from, so do that. Signed-off-by: Jens Axboe diff --git a/fs/super.c b/fs/super.c index dc72491..1527e6a 100644 --- a/fs/super.c +++ b/fs/super.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include "internal.h" -- cgit v0.10.2 From 3c2023dd8ed31e2ecfbb2d5aa20e8884d4b339e2 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 29 Apr 2010 20:35:29 +0200 Subject: exofs: Fix "add bdi backing to mount session" fall out The patch: add bdi backing to mount session (b3d0ab7e60d1865bb6f6a79a77aaba22f2543236) Has a bug in the placement of the bdi member at struct exofs_sb_info. The layout member must be kept last. Signed-off-by: Boaz Harrosh Signed-off-by: Jens Axboe diff --git a/fs/exofs/exofs.h b/fs/exofs/exofs.h index 5437327..22721b2 100644 --- a/fs/exofs/exofs.h +++ b/fs/exofs/exofs.h @@ -85,6 +85,7 @@ struct exofs_sb_info { u32 s_next_generation; /* next gen # to use */ atomic_t s_curr_pending; /* number of pending commands */ uint8_t s_cred[OSD_CAP_LEN]; /* credential for the fscb */ + struct backing_dev_info bdi; /* register our bdi with VFS */ struct pnfs_osd_data_map data_map; /* Default raid to use * FIXME: Needed ? @@ -93,7 +94,6 @@ struct exofs_sb_info { struct exofs_layout layout; /* Default files layout, * contains the variable osd_dev * array. Keep last */ - struct backing_dev_info bdi; struct osd_dev *_min_one_dev[1]; /* Place holder for one dev */ }; -- cgit v0.10.2 From 9bf729c0af67897ea8498ce17c29b0683f7f2028 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 29 Apr 2010 09:55:50 +1000 Subject: xfs: add a shrinker to background inode reclaim On low memory boxes or those with highmem, kernel can OOM before the background reclaims inodes via xfssyncd. Add a shrinker to run inode reclaim so that it inode reclaim is expedited when memory is low. This is more complex than it needs to be because the VM folk don't want a context added to the shrinker infrastructure. Hence we need to add a global list of XFS mount structures so the shrinker can traverse them. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 52e06b4..29f1edc 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1209,6 +1209,7 @@ xfs_fs_put_super( xfs_unmountfs(mp); xfs_freesb(mp); + xfs_inode_shrinker_unregister(mp); xfs_icsb_destroy_counters(mp); xfs_close_devices(mp); xfs_dmops_put(mp); @@ -1622,6 +1623,8 @@ xfs_fs_fill_super( if (error) goto fail_vnrele; + xfs_inode_shrinker_register(mp); + kfree(mtpt); return 0; @@ -1867,6 +1870,7 @@ init_xfs_fs(void) goto out_cleanup_procfs; vfs_initquota(); + xfs_inode_shrinker_init(); error = register_filesystem(&xfs_fs_type); if (error) @@ -1894,6 +1898,7 @@ exit_xfs_fs(void) { vfs_exitquota(); unregister_filesystem(&xfs_fs_type); + xfs_inode_shrinker_destroy(); xfs_sysctl_unregister(); xfs_cleanup_procfs(); xfs_buf_terminate(); diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c index fd96982..a427c63 100644 --- a/fs/xfs/linux-2.6/xfs_sync.c +++ b/fs/xfs/linux-2.6/xfs_sync.c @@ -95,7 +95,8 @@ xfs_inode_ag_walk( struct xfs_perag *pag, int flags), int flags, int tag, - int exclusive) + int exclusive, + int *nr_to_scan) { uint32_t first_index; int last_error = 0; @@ -134,7 +135,7 @@ restart: if (error == EFSCORRUPTED) break; - } while (1); + } while ((*nr_to_scan)--); if (skipped) { delay(1); @@ -150,12 +151,15 @@ xfs_inode_ag_iterator( struct xfs_perag *pag, int flags), int flags, int tag, - int exclusive) + int exclusive, + int *nr_to_scan) { int error = 0; int last_error = 0; xfs_agnumber_t ag; + int nr; + nr = nr_to_scan ? *nr_to_scan : INT_MAX; for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) { struct xfs_perag *pag; @@ -165,14 +169,18 @@ xfs_inode_ag_iterator( continue; } error = xfs_inode_ag_walk(mp, pag, execute, flags, tag, - exclusive); + exclusive, &nr); xfs_perag_put(pag); if (error) { last_error = error; if (error == EFSCORRUPTED) break; } + if (nr <= 0) + break; } + if (nr_to_scan) + *nr_to_scan = nr; return XFS_ERROR(last_error); } @@ -291,7 +299,7 @@ xfs_sync_data( ASSERT((flags & ~(SYNC_TRYLOCK|SYNC_WAIT)) == 0); error = xfs_inode_ag_iterator(mp, xfs_sync_inode_data, flags, - XFS_ICI_NO_TAG, 0); + XFS_ICI_NO_TAG, 0, NULL); if (error) return XFS_ERROR(error); @@ -310,7 +318,7 @@ xfs_sync_attr( ASSERT((flags & ~SYNC_WAIT) == 0); return xfs_inode_ag_iterator(mp, xfs_sync_inode_attr, flags, - XFS_ICI_NO_TAG, 0); + XFS_ICI_NO_TAG, 0, NULL); } STATIC int @@ -673,6 +681,7 @@ __xfs_inode_set_reclaim_tag( radix_tree_tag_set(&pag->pag_ici_root, XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino), XFS_ICI_RECLAIM_TAG); + pag->pag_ici_reclaimable++; } /* @@ -705,6 +714,7 @@ __xfs_inode_clear_reclaim_tag( { radix_tree_tag_clear(&pag->pag_ici_root, XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG); + pag->pag_ici_reclaimable--; } /* @@ -854,5 +864,93 @@ xfs_reclaim_inodes( int mode) { return xfs_inode_ag_iterator(mp, xfs_reclaim_inode, mode, - XFS_ICI_RECLAIM_TAG, 1); + XFS_ICI_RECLAIM_TAG, 1, NULL); +} + +/* + * Shrinker infrastructure. + * + * This is all far more complex than it needs to be. It adds a global list of + * mounts because the shrinkers can only call a global context. We need to make + * the shrinkers pass a context to avoid the need for global state. + */ +static LIST_HEAD(xfs_mount_list); +static struct rw_semaphore xfs_mount_list_lock; + +static int +xfs_reclaim_inode_shrink( + int nr_to_scan, + gfp_t gfp_mask) +{ + struct xfs_mount *mp; + struct xfs_perag *pag; + xfs_agnumber_t ag; + int reclaimable = 0; + + if (nr_to_scan) { + if (!(gfp_mask & __GFP_FS)) + return -1; + + down_read(&xfs_mount_list_lock); + list_for_each_entry(mp, &xfs_mount_list, m_mplist) { + xfs_inode_ag_iterator(mp, xfs_reclaim_inode, 0, + XFS_ICI_RECLAIM_TAG, 1, &nr_to_scan); + if (nr_to_scan <= 0) + break; + } + up_read(&xfs_mount_list_lock); + } + + down_read(&xfs_mount_list_lock); + list_for_each_entry(mp, &xfs_mount_list, m_mplist) { + for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) { + + pag = xfs_perag_get(mp, ag); + if (!pag->pag_ici_init) { + xfs_perag_put(pag); + continue; + } + reclaimable += pag->pag_ici_reclaimable; + xfs_perag_put(pag); + } + } + up_read(&xfs_mount_list_lock); + return reclaimable; +} + +static struct shrinker xfs_inode_shrinker = { + .shrink = xfs_reclaim_inode_shrink, + .seeks = DEFAULT_SEEKS, +}; + +void __init +xfs_inode_shrinker_init(void) +{ + init_rwsem(&xfs_mount_list_lock); + register_shrinker(&xfs_inode_shrinker); +} + +void +xfs_inode_shrinker_destroy(void) +{ + ASSERT(list_empty(&xfs_mount_list)); + unregister_shrinker(&xfs_inode_shrinker); +} + +void +xfs_inode_shrinker_register( + struct xfs_mount *mp) +{ + down_write(&xfs_mount_list_lock); + list_add_tail(&mp->m_mplist, &xfs_mount_list); + up_write(&xfs_mount_list_lock); +} + +void +xfs_inode_shrinker_unregister( + struct xfs_mount *mp) +{ + down_write(&xfs_mount_list_lock); + list_del(&mp->m_mplist); + up_write(&xfs_mount_list_lock); } diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h index d480c34..cdcbaac 100644 --- a/fs/xfs/linux-2.6/xfs_sync.h +++ b/fs/xfs/linux-2.6/xfs_sync.h @@ -53,6 +53,11 @@ void __xfs_inode_clear_reclaim_tag(struct xfs_mount *mp, struct xfs_perag *pag, int xfs_sync_inode_valid(struct xfs_inode *ip, struct xfs_perag *pag); int xfs_inode_ag_iterator(struct xfs_mount *mp, int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags), - int flags, int tag, int write_lock); + int flags, int tag, int write_lock, int *nr_to_scan); + +void xfs_inode_shrinker_init(void); +void xfs_inode_shrinker_destroy(void); +void xfs_inode_shrinker_register(struct xfs_mount *mp); +void xfs_inode_shrinker_unregister(struct xfs_mount *mp); #endif diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c index 5d0ee8d..50bee07 100644 --- a/fs/xfs/quota/xfs_qm_syscalls.c +++ b/fs/xfs/quota/xfs_qm_syscalls.c @@ -891,7 +891,8 @@ xfs_qm_dqrele_all_inodes( uint flags) { ASSERT(mp->m_quotainfo); - xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG, 0); + xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, + XFS_ICI_NO_TAG, 0, NULL); } /*------------------------------------------------------------------------*/ diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h index b1a5a1f..abb8222 100644 --- a/fs/xfs/xfs_ag.h +++ b/fs/xfs/xfs_ag.h @@ -223,6 +223,7 @@ typedef struct xfs_perag { int pag_ici_init; /* incore inode cache initialised */ rwlock_t pag_ici_lock; /* incore inode lock */ struct radix_tree_root pag_ici_root; /* incore inode cache root */ + int pag_ici_reclaimable; /* reclaimable inodes */ #endif int pagb_count; /* pagb slots in use */ xfs_perag_busy_t pagb_list[XFS_PAGB_NUM_SLOTS]; /* unstable blocks */ diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index 4fa0bc7..9ff48a16 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -259,6 +259,7 @@ typedef struct xfs_mount { wait_queue_head_t m_wait_single_sync_task; __int64_t m_update_flags; /* sb flags we need to update on the next remount,rw */ + struct list_head m_mplist; /* inode shrinker mount list */ } xfs_mount_t; /* -- cgit v0.10.2 From db7e1bc479cc941c53839b18ff811c7def0c52e7 Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Thu, 29 Apr 2010 12:22:52 +0100 Subject: ARM: 6061/1: PL061 GPIO: Bug fix - setting gpio for HIGH_LEVEL interrupt is not working. In current implementation of PL061, setting type of irq to HIGH_LEVEL is not working. This patch fixes this bug. Signed-off-by: Viresh Kumar Acked-by: Baruch Siach Signed-off-by: Russell King diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c index 2196f31..105701a 100644 --- a/drivers/gpio/pl061.c +++ b/drivers/gpio/pl061.c @@ -189,7 +189,7 @@ static int pl061_irq_type(unsigned irq, unsigned trigger) gpioibe &= ~(1 << offset); if (trigger & IRQ_TYPE_EDGE_RISING) gpioiev |= 1 << offset; - else + else if (trigger & IRQ_TYPE_EDGE_FALLING) gpioiev &= ~(1 << offset); } writeb(gpioibe, chip->base + GPIOIBE); -- cgit v0.10.2 From 56151e753468e34aeb322af4b0309ab727c97d2e Mon Sep 17 00:00:00 2001 From: Wufei Date: Wed, 28 Apr 2010 17:42:32 -0400 Subject: kgdb: don't needlessly skip PAGE_USER test for Fsl booke The bypassing of this test is a leftover from 2.4 vintage kernels, and is no longer appropriate, or even used by KGDB. Currently KGDB uses probe_kernel_write() for all access to memory via the KGDB core, so it can simply be deleted. This fixes CVE-2010-1446. CC: Benjamin Herrenschmidt CC: Paul Mackerras CC: Kumar Gala Signed-off-by: Wufei Signed-off-by: Jason Wessel diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index c539472..1ce9dd5 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -155,15 +155,10 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys, if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS) TLBCAM[index].MAS7 = (u64)phys >> 32; -#ifndef CONFIG_KGDB /* want user access for breakpoints */ if (flags & _PAGE_USER) { TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR; TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0); } -#else - TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR; - TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0); -#endif tlbcam_addrs[index].start = virt; tlbcam_addrs[index].limit = virt + size - 1; -- cgit v0.10.2 From 66f41d4c5c8a5deed66fdcc84509376c9a0bf9d8 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 29 Apr 2010 20:02:05 -0700 Subject: Linux 2.6.34-rc6 diff --git a/Makefile b/Makefile index fa1db90..5f05f8c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 34 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Sheep on Meth # *DOCUMENTATION* -- cgit v0.10.2