From 875e6897e0dc2cf568b0975ea7b5d0e9ca1f1e46 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 7 May 2012 23:55:10 -0600 Subject: ARM: OMAP3: clock data: replace 3503/3517 flag with AM35x flag for UART4 The AM35x UART4 is common to all AM35x devices, so use CK_AM35XX instead of (CK_3505 | CK_3517), which is equivalent. Acked-by: Vaibhav Hiremath Tested-by: Vaibhav Hiremath Signed-off-by: Kevin Hilman Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index f4a626f..dac076a 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3419,7 +3419,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX), - CLK(NULL, "uart4_fck", &uart4_fck_am35xx, CK_3505 | CK_3517), + CLK(NULL, "uart4_fck", &uart4_fck_am35xx, CK_AM35XX), CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX), CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX), CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX), -- cgit v0.10.2 From c93a98c9024d687e91a3414cb3d5f74d0abf3068 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 7 May 2012 23:55:10 -0600 Subject: ARM: OMAP3: clock data: treat all AM35x devices the same The init for 3505/3517 specific clocks depends on the ordering of cpu_is checks, is error prone and confusing (there are 2 separate checks for cpu_is_omap3505()). Remove the 3505-specific checking since CK_3505 flag is not used, and treat all AM35x clocks the same. This means that the SGX clock (the only AM35x clkdev not currently flagged for 3505) will now be registered on 3505, but that is harmless. That can be cleaned up when the clkdev nodes are removed in favor of them being registered by hwmod. Acked-by: Vaibhav Hiremath Tested-by: Vaibhav Hiremath Signed-off-by: Kevin Hilman Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index dac076a..23b1e78 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3513,21 +3513,9 @@ int __init omap3xxx_clk_init(void) struct omap_clk *c; u32 cpu_clkflg = 0; - /* - * 3505 must be tested before 3517, since 3517 returns true - * for both AM3517 chips and AM3517 family chips, which - * includes 3505. Unfortunately there's no obvious family - * test for 3517/3505 :-( - */ - if (cpu_is_omap3505()) { - cpu_mask = RATE_IN_34XX; - cpu_clkflg = CK_3505; - } else if (cpu_is_omap3517()) { + if (cpu_is_omap3517()) { cpu_mask = RATE_IN_34XX; cpu_clkflg = CK_3517; - } else if (cpu_is_omap3505()) { - cpu_mask = RATE_IN_34XX; - cpu_clkflg = CK_3505; } else if (cpu_is_omap3630()) { cpu_mask = (RATE_IN_34XX | RATE_IN_36XX); cpu_clkflg = CK_36XX; -- cgit v0.10.2 From f0c54d31b04243ab761dc0d7a122b77adf8d0a3a Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 7 May 2012 23:55:11 -0600 Subject: ARM: OMAP: clock: convert AM3517/3505 detection/flags to AM35xx To improve the clarity of the code, replace the CK_3517 flag used in the clock data with CK_AM35XX. The CK_3505 flag can also be removed, since it is now unused. Acked-by: Vaibhav Hiremath Signed-off-by: Kevin Hilman Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 23b1e78..8000693 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3294,8 +3294,8 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1), CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1), CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1), - CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2PLUS | CK_3517 | CK_36XX), - CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2PLUS | CK_3517 | CK_36XX), + CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), CLK(NULL, "modem_fck", &modem_fck, CK_34XX | CK_36XX), CLK(NULL, "sad2d_ick", &sad2d_ick, CK_34XX | CK_36XX), @@ -3515,7 +3515,7 @@ int __init omap3xxx_clk_init(void) if (cpu_is_omap3517()) { cpu_mask = RATE_IN_34XX; - cpu_clkflg = CK_3517; + cpu_clkflg = CK_AM35XX; } else if (cpu_is_omap3630()) { cpu_mask = (RATE_IN_34XX | RATE_IN_36XX); cpu_clkflg = CK_36XX; diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h index b299b8d..d0ed8c4 100644 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h @@ -34,8 +34,7 @@ struct omap_clk { #define CK_243X (1 << 5) /* 243x, 253x */ #define CK_3430ES1 (1 << 6) /* 34xxES1 only */ #define CK_3430ES2PLUS (1 << 7) /* 34xxES2, ES3, non-Sitara 35xx only */ -#define CK_3505 (1 << 8) -#define CK_3517 (1 << 9) +#define CK_AM35XX (1 << 9) /* Sitara AM35xx */ #define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */ #define CK_443X (1 << 11) #define CK_TI816X (1 << 12) @@ -44,7 +43,6 @@ struct omap_clk { #define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) -#define CK_AM35XX (CK_3505 | CK_3517) /* all Sitara AM35xx */ #define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX) -- cgit v0.10.2 From 4e68f5a79da5b595fc40ceff5ebcfa3e6637bf37 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 7 May 2012 23:55:21 -0600 Subject: ARM: OMAP3: Fix CM register bit masks The register bits for MPU_CLK_SRC and IVA2_CLK_SRC in CM_CLKSEL1_PLL register are 3 bits wide. Fix the MASK definition accordingly. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index b912759..8083a8c 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -79,7 +79,7 @@ /* CM_CLKSEL1_PLL_IVA2 */ #define OMAP3430_IVA2_CLK_SRC_SHIFT 19 -#define OMAP3430_IVA2_CLK_SRC_MASK (0x3 << 19) +#define OMAP3430_IVA2_CLK_SRC_MASK (0x7 << 19) #define OMAP3430_IVA2_DPLL_MULT_SHIFT 8 #define OMAP3430_IVA2_DPLL_MULT_MASK (0x7ff << 8) #define OMAP3430_IVA2_DPLL_DIV_SHIFT 0 @@ -124,7 +124,7 @@ /* CM_CLKSEL1_PLL_MPU */ #define OMAP3430_MPU_CLK_SRC_SHIFT 19 -#define OMAP3430_MPU_CLK_SRC_MASK (0x3 << 19) +#define OMAP3430_MPU_CLK_SRC_MASK (0x7 << 19) #define OMAP3430_MPU_DPLL_MULT_SHIFT 8 #define OMAP3430_MPU_DPLL_MULT_MASK (0x7ff << 8) #define OMAP3430_MPU_DPLL_DIV_SHIFT 0 -- cgit v0.10.2 From 444b3df6b387e6dd55cd9dbc8924e111792d2c42 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 7 May 2012 23:55:21 -0600 Subject: ARM: OMAP2/3: Add idle_st bits for ST_32KSYNC timer to prcm-common header Add missing idle_st bit for 32k-sync timer into the prcm-common header file, required for hwmod data. Signed-off-by: Vaibhav Hiremath Reviewed-by: Santosh Shilimkar Cc: Felipe Balbi Cc: Benoit Cousson Cc: Tony Lindgren Cc: Paul Walmsley Cc: Kevin Hilman Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 5aa5435..29955d5 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -177,6 +177,8 @@ /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */ #define OMAP24XX_ST_GPIOS_SHIFT 2 #define OMAP24XX_ST_GPIOS_MASK (1 << 2) +#define OMAP24XX_ST_32KSYNC_SHIFT 1 +#define OMAP24XX_ST_32KSYNC_MASK (1 << 1) #define OMAP24XX_ST_GPT1_SHIFT 0 #define OMAP24XX_ST_GPT1_MASK (1 << 0) @@ -307,6 +309,8 @@ #define OMAP3430_ST_SR1_MASK (1 << 6) #define OMAP3430_ST_GPIO1_SHIFT 3 #define OMAP3430_ST_GPIO1_MASK (1 << 3) +#define OMAP3430_ST_32KSYNC_SHIFT 2 +#define OMAP3430_ST_32KSYNC_MASK (1 << 2) #define OMAP3430_ST_GPT12_SHIFT 1 #define OMAP3430_ST_GPT12_MASK (1 << 1) #define OMAP3430_ST_GPT1_SHIFT 0 -- cgit v0.10.2 From 610eb8c218ef214594295776275855640d37ab2a Mon Sep 17 00:00:00 2001 From: R Sricharan Date: Mon, 7 May 2012 23:55:22 -0600 Subject: ARM: OMAP4+: Add prm and cm base init function. Instead of statically defining seperate arrays for every OMAP4+ archs, have a generic init function to populate the arrays. This avoids the need for creating new array for every arch added in the future that reuses the prm and cm registers read/write code. Cc: Paul Walmsley Signed-off-by: R Sricharan Signed-off-by: Santosh Shilimkar Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index bd8810c..8c86d29 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -32,6 +32,7 @@ #include "prcm44xx.h" #include "prm44xx.h" #include "prcm_mpu44xx.h" +#include "prcm-common.h" /* * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield: @@ -49,14 +50,21 @@ #define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2 #define CLKCTRL_IDLEST_DISABLED 0x3 -static u32 _cm_bases[OMAP4_MAX_PRCM_PARTITIONS] = { - [OMAP4430_INVALID_PRCM_PARTITION] = 0, - [OMAP4430_PRM_PARTITION] = OMAP4430_PRM_BASE, - [OMAP4430_CM1_PARTITION] = OMAP4430_CM1_BASE, - [OMAP4430_CM2_PARTITION] = OMAP4430_CM2_BASE, - [OMAP4430_SCRM_PARTITION] = 0, - [OMAP4430_PRCM_MPU_PARTITION] = OMAP4430_PRCM_MPU_BASE, -}; +static void __iomem *_cm_bases[OMAP4_MAX_PRCM_PARTITIONS]; + +/** + * omap_cm_base_init - Populates the cm partitions + * + * Populates the base addresses of the _cm_bases + * array used for read/write of cm module registers. + */ +void omap_cm_base_init(void) +{ + _cm_bases[OMAP4430_PRM_PARTITION] = prm_base; + _cm_bases[OMAP4430_CM1_PARTITION] = cm_base; + _cm_bases[OMAP4430_CM2_PARTITION] = cm2_base; + _cm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base; +} /* Private functions */ @@ -106,7 +114,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_cm_bases[part]); - return __raw_readl(OMAP2_L4_IO_ADDRESS(_cm_bases[part] + inst + idx)); + return __raw_readl(_cm_bases[part] + inst + idx); } /* Write into a register in a CM instance */ @@ -115,7 +123,7 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_cm_bases[part]); - __raw_writel(val, OMAP2_L4_IO_ADDRESS(_cm_bases[part] + inst + idx)); + __raw_writel(val, _cm_bases[part] + inst + idx); } /* Read-modify-write a register in CM1. Caller must lock */ diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 1549c11..8a6953a 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -166,6 +166,7 @@ static struct omap_globals omap4_globals = { .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE), + .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE), }; void __init omap2_set_globals_443x(void) diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 57da7f4..0672fc5 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -111,6 +111,7 @@ struct omap_globals { void __iomem *prm; /* Power and Reset Management */ void __iomem *cm; /* Clock Management */ void __iomem *cm2; + void __iomem *prcm_mpu; }; void omap2_set_globals_242x(void); diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 29955d5..6da3ba4 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -414,6 +414,19 @@ extern void __iomem *prm_base; extern void __iomem *cm_base; extern void __iomem *cm2_base; +extern void __iomem *prcm_mpu_base; + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_OMAP5) +extern void omap_prm_base_init(void); +extern void omap_cm_base_init(void); +#else +static inline void omap_prm_base_init(void) +{ +} +static inline void omap_cm_base_init(void) +{ +} +#endif /** * struct omap_prcm_irq - describes a PRCM interrupt bit diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 626acfa..480f40a 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -42,6 +42,7 @@ void __iomem *prm_base; void __iomem *cm_base; void __iomem *cm2_base; +void __iomem *prcm_mpu_base; #define MAX_MODULE_ENABLE_WAIT 100000 @@ -155,4 +156,11 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) cm_base = omap2_globals->cm; if (omap2_globals->cm2) cm2_base = omap2_globals->cm2; + if (omap2_globals->prcm_mpu) + prcm_mpu_base = omap2_globals->prcm_mpu; + + if (cpu_is_omap44xx()) { + omap_prm_base_init(); + omap_cm_base_init(); + } } diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index 9b3898a..c12320c 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -18,20 +18,26 @@ #include "iomap.h" #include "common.h" +#include "prcm-common.h" #include "prm44xx.h" #include "prminst44xx.h" #include "prm-regbits-44xx.h" #include "prcm44xx.h" #include "prcm_mpu44xx.h" -static u32 _prm_bases[OMAP4_MAX_PRCM_PARTITIONS] = { - [OMAP4430_INVALID_PRCM_PARTITION] = 0, - [OMAP4430_PRM_PARTITION] = OMAP4430_PRM_BASE, - [OMAP4430_CM1_PARTITION] = 0, - [OMAP4430_CM2_PARTITION] = 0, - [OMAP4430_SCRM_PARTITION] = 0, - [OMAP4430_PRCM_MPU_PARTITION] = OMAP4430_PRCM_MPU_BASE, -}; +static void __iomem *_prm_bases[OMAP4_MAX_PRCM_PARTITIONS]; + +/** + * omap_prm_base_init - Populates the prm partitions + * + * Populates the base addresses of the _prm_bases + * array used for read/write of prm module registers. + */ +void omap_prm_base_init(void) +{ + _prm_bases[OMAP4430_PRM_PARTITION] = prm_base; + _prm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base; +} /* Read a register in a PRM instance */ u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx) @@ -39,8 +45,7 @@ u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_prm_bases[part]); - return __raw_readl(OMAP2_L4_IO_ADDRESS(_prm_bases[part] + inst + - idx)); + return __raw_readl(_prm_bases[part] + inst + idx); } /* Write into a register in a PRM instance */ @@ -49,7 +54,7 @@ void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_prm_bases[part]); - __raw_writel(val, OMAP2_L4_IO_ADDRESS(_prm_bases[part] + inst + idx)); + __raw_writel(val, _prm_bases[part] + inst + idx); } /* Read-modify-write a register in PRM. Caller must lock */ -- cgit v0.10.2 From f1bbbb1365fdb1abe29f31d4ac455f265f9bc2ff Mon Sep 17 00:00:00 2001 From: Tarun Kanti DebBarma Date: Mon, 7 May 2012 23:55:30 -0600 Subject: ARM: OMAP2+: dmtimer: cleanup iclk usage We do not use iclk anywhere in the dmtimer driver and so removing it. Hence removing the timer iclk entries from OMAP4 clkdev table as well. Signed-off-by: Tarun Kanti DebBarma Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index fa6ea65..2172f66 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3355,17 +3355,6 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X), CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X), CLK(NULL, "gpmc_ck", &dummy_ck, CK_443X), - CLK(NULL, "gpt1_ick", &dummy_ck, CK_443X), - CLK(NULL, "gpt2_ick", &dummy_ck, CK_443X), - CLK(NULL, "gpt3_ick", &dummy_ck, CK_443X), - CLK(NULL, "gpt4_ick", &dummy_ck, CK_443X), - CLK(NULL, "gpt5_ick", &dummy_ck, CK_443X), - CLK(NULL, "gpt6_ick", &dummy_ck, CK_443X), - CLK(NULL, "gpt7_ick", &dummy_ck, CK_443X), - CLK(NULL, "gpt8_ick", &dummy_ck, CK_443X), - CLK(NULL, "gpt9_ick", &dummy_ck, CK_443X), - CLK(NULL, "gpt10_ick", &dummy_ck, CK_443X), - CLK(NULL, "gpt11_ick", &dummy_ck, CK_443X), CLK("omap_i2c.1", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X), diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index ecec873..1b78358 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -178,13 +178,6 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (IS_ERR(timer->fclk)) return -ENODEV; - sprintf(name, "gpt%d_ick", gptimer_id); - timer->iclk = clk_get(NULL, name); - if (IS_ERR(timer->iclk)) { - clk_put(timer->fclk); - return -ENODEV; - } - omap_hwmod_enable(oh); sys_timer_reserved |= (1 << (gptimer_id - 1)); diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 9418f00..be2b8c4 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -259,7 +259,7 @@ struct omap_dm_timer { unsigned long phys_base; int id; int irq; - struct clk *iclk, *fclk; + struct clk *fclk; void __iomem *io_base; void __iomem *sys_stat; /* TISTAT timer status */ -- cgit v0.10.2 From d76316fef3f2ecec210b78a38263a06bb4f6c1b9 Mon Sep 17 00:00:00 2001 From: Vaibhav Bedia Date: Mon, 7 May 2012 23:55:30 -0600 Subject: ARM: OMAP3+: dpll: Configure autoidle mode only if it's supported The current DPLL code enables and disables autoidle features without checking whether the autoidle register is available. Fix this by putting a check for the existence of the autoidle register in the DPLL data. With such a check in place, for DPLLs which do not support this feature, simply skipping the autoidle_reg entry in the DPLL data is sufficient. Signed-off-by: Vaibhav Bedia Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index fc56745..f0f10be 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -142,7 +142,8 @@ static int _omap3_noncore_dpll_lock(struct clk *clk) ai = omap3_dpll_autoidle_read(clk); - omap3_dpll_deny_idle(clk); + if (ai) + omap3_dpll_deny_idle(clk); _omap3_dpll_write_clken(clk, DPLL_LOCKED); @@ -186,8 +187,6 @@ static int _omap3_noncore_dpll_bypass(struct clk *clk) if (ai) omap3_dpll_allow_idle(clk); - else - omap3_dpll_deny_idle(clk); return r; } @@ -216,8 +215,6 @@ static int _omap3_noncore_dpll_stop(struct clk *clk) if (ai) omap3_dpll_allow_idle(clk); - else - omap3_dpll_deny_idle(clk); return 0; } @@ -519,6 +516,9 @@ u32 omap3_dpll_autoidle_read(struct clk *clk) dd = clk->dpll_data; + if (!dd->autoidle_reg) + return -EINVAL; + v = __raw_readl(dd->autoidle_reg); v &= dd->autoidle_mask; v >>= __ffs(dd->autoidle_mask); @@ -545,6 +545,12 @@ void omap3_dpll_allow_idle(struct clk *clk) dd = clk->dpll_data; + if (!dd->autoidle_reg) { + pr_debug("clock: DPLL %s: autoidle not supported\n", + clk->name); + return; + } + /* * REVISIT: CORE DPLL can optionally enter low-power bypass * by writing 0x5 instead of 0x1. Add some mechanism to @@ -554,6 +560,7 @@ void omap3_dpll_allow_idle(struct clk *clk) v &= ~dd->autoidle_mask; v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask); __raw_writel(v, dd->autoidle_reg); + } /** @@ -572,6 +579,12 @@ void omap3_dpll_deny_idle(struct clk *clk) dd = clk->dpll_data; + if (!dd->autoidle_reg) { + pr_debug("clock: DPLL %s: autoidle not supported\n", + clk->name); + return; + } + v = __raw_readl(dd->autoidle_reg); v &= ~dd->autoidle_mask; v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask); -- cgit v0.10.2 From 8f97437eb54f32bb8678904c2f827a853a3d076c Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 7 May 2012 23:55:31 -0600 Subject: ARM: OMAP3: clock data: add clockdomain for HDQ functional clock Add the correct clockdomain for the HDQ functional clock. This is needed for the clock and hwmod PM code to work correctly. Signed-off-by: Paul Walmsley Cc: NeilBrown diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index f4a626f..8fe7d70 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -1,7 +1,7 @@ /* * OMAP3 clock data * - * Copyright (C) 2007-2010 Texas Instruments, Inc. + * Copyright (C) 2007-2010, 2012 Texas Instruments, Inc. * Copyright (C) 2007-2011 Nokia Corporation * * Written by Paul Walmsley @@ -1640,6 +1640,7 @@ static struct clk hdq_fck = { .name = "hdq_fck", .ops = &clkops_omap2_dflt_wait, .parent = &core_12m_fck, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_HDQ_SHIFT, .recalc = &followparent_recalc, -- cgit v0.10.2 From 5a68a736581290d10e2ebaf2e5baa8e21eed6dd5 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Mon, 7 May 2012 23:55:38 -0600 Subject: ARM: OMAP2+: powerdomain: Get rid off duplicate pwrdm_clkdm_state_switch() API With patch 'ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch()', the pwrdm_clkdm_state_switch() API becomes duplicate of pwrdm_state_switch(). Get rid off duplicate pwrdm_clkdm_state_switch() and update the users of it with pwrdm_state_switch() Signed-off-by: Santosh Shilimkar Cc: Rajendra Nayak Cc: Paul Walmsley Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index f57ed5b..77db067 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -439,7 +439,7 @@ void omap2_clk_disable_unused(struct clk *clk) clk->ops->disable(clk); } if (clk->clkdm != NULL) - pwrdm_clkdm_state_switch(clk->clkdm); + pwrdm_state_switch(clk->clkdm->pwrdm.ptr); } #endif diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index ad07689..8664f5a 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -840,7 +840,7 @@ void clkdm_allow_idle(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags |= _CLKDM_FLAG_HWSUP_ENABLED; arch_clkdm->clkdm_allow_idle(clkdm); - pwrdm_clkdm_state_switch(clkdm); + pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); } @@ -924,8 +924,7 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); arch_clkdm->clkdm_clk_enable(clkdm); - pwrdm_wait_transition(clkdm->pwrdm.ptr); - pwrdm_clkdm_state_switch(clkdm); + pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name); @@ -950,7 +949,7 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); arch_clkdm->clkdm_clk_disable(clkdm); - pwrdm_clkdm_state_switch(clkdm); + pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 96ad3dbe..9611490 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -981,16 +981,6 @@ int pwrdm_state_switch(struct powerdomain *pwrdm) return ret; } -int pwrdm_clkdm_state_switch(struct clockdomain *clkdm) -{ - if (clkdm != NULL && clkdm->pwrdm.ptr != NULL) { - pwrdm_wait_transition(clkdm->pwrdm.ptr); - return pwrdm_state_switch(clkdm->pwrdm.ptr); - } - - return -EINVAL; -} - int pwrdm_pre_transition(void) { pwrdm_for_each(_pwrdm_pre_transition_cb, NULL); diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 0d72a8a..8f88d65 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -213,7 +213,6 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm); int pwrdm_wait_transition(struct powerdomain *pwrdm); int pwrdm_state_switch(struct powerdomain *pwrdm); -int pwrdm_clkdm_state_switch(struct clockdomain *clkdm); int pwrdm_pre_transition(void); int pwrdm_post_transition(void); int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm); -- cgit v0.10.2 From 48a6884fd14d6e3c0efc3d97621c662ee6f6ae0f Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Mon, 7 May 2012 23:55:38 -0600 Subject: arm: omap3: clockdomain data: Remove superfluous commas from gfx_sgx_3xxx_wkdeps[] Clean up clockdomains3xxx_data.c a bit by removing the superfluous commas in gfx_sgx_3xxx_wkdeps[]. Signed-off-by: Mark A. Greer Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c index b84e138..6038adb 100644 --- a/arch/arm/mach-omap2/clockdomains3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c @@ -53,9 +53,9 @@ * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE */ static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = { - { .clkdm_name = "iva2_clkdm", }, - { .clkdm_name = "mpu_clkdm", }, - { .clkdm_name = "wkup_clkdm", }, + { .clkdm_name = "iva2_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, { NULL }, }; -- cgit v0.10.2 From ad1b6662eb5fe293e8b402497b3835710848c389 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 8 May 2012 17:23:33 -0600 Subject: ARM: OMAP2420: hwmod data: Add MMC hwmod data for 2420 Add MMC for 2420 so we can pass the DMA request lines the same way as we already do on omap2430 and later. Cc: Benoit Cousson Cc: Paul Walmsley Signed-off-by: Tony Lindgren [paul@pwsan.com: updated to apply on top of the 3.5 hwmod cleanup; changed mmc hwmod name/class to "msdi" as documented in the 2420 TRM Rev X; added sysconfig register information; added 16 bit register width flag; added MSDI custom reset code] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index d8604a3..4eee0f1 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -189,6 +189,9 @@ ifneq ($(CONFIG_TIDSPBRIDGE),) obj-y += dsp.o endif +# OMAP2420 MSDI controller integration support ("MMC") +obj-$(CONFIG_SOC_OMAP2420) += msdi.o + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c new file mode 100644 index 0000000..ef2a692 --- /dev/null +++ b/arch/arm/mach-omap2/msdi.c @@ -0,0 +1,88 @@ +/* + * MSDI IP block reset + * + * Copyright (C) 2012 Texas Instruments, Inc. + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + * XXX What about pad muxing? + */ + +#include + +#include +#include + +#include "common.h" + +/* + * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register + * from the IP block's base address + */ +#define MSDI_CON_OFFSET 0x0c + +/* Register bitfields in the CON register */ +#define MSDI_CON_POW_MASK BIT(11) +#define MSDI_CON_CLKD_MASK (0x3f << 0) +#define MSDI_CON_CLKD_SHIFT 0 + +/* Maximum microseconds to wait for OMAP module to softreset */ +#define MAX_MODULE_SOFTRESET_WAIT 10000 + +/* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */ +#define MSDI_TARGET_RESET_CLKD 0x3ff + +/** + * omap_msdi_reset - reset the MSDI IP block + * @oh: struct omap_hwmod * + * + * The MSDI IP block on OMAP2420 has to have both the POW and CLKD + * fields set inside its CON register for a reset to complete + * successfully. This is not documented in the TRM. For CLKD, we use + * the value that results in the lowest possible clock rate, to attempt + * to avoid disturbing any cards. + */ +int omap_msdi_reset(struct omap_hwmod *oh) +{ + u16 v = 0; + int c = 0; + + /* Write to the SOFTRESET bit */ + omap_hwmod_softreset(oh); + + /* Enable the MSDI core and internal clock */ + v |= MSDI_CON_POW_MASK; + v |= MSDI_TARGET_RESET_CLKD << MSDI_CON_CLKD_SHIFT; + omap_hwmod_write(v, oh, MSDI_CON_OFFSET); + + /* Poll on RESETDONE bit */ + omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + + if (c == MAX_MODULE_SOFTRESET_WAIT) + pr_warning("%s: %s: softreset failed (waited %d usec)\n", + __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); + else + pr_debug("%s: %s: softreset in %d usec\n", __func__, + oh->name, c); + + /* Disable the MSDI internal clock */ + v &= ~MSDI_CON_CLKD_MASK; + omap_hwmod_write(v, oh, MSDI_CON_OFFSET); + + return 0; +} diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 2c087ff..0c08d3f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "omap_hwmod_common_data.h" @@ -239,6 +240,50 @@ static struct omap_hwmod omap2420_mcbsp2_hwmod = { }, }; +static struct omap_hwmod_class_sysconfig omap2420_msdi_sysc = { + .rev_offs = 0x3c, + .sysc_offs = 0x64, + .syss_offs = 0x68, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2420_msdi_hwmod_class = { + .name = "msdi", + .sysc = &omap2420_msdi_sysc, + .reset = &omap_msdi_reset, +}; + +/* msdi1 */ +static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = { + { .irq = 83 }, + { .irq = -1 } +}; + +static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = { + { .name = "tx", .dma_req = 61 }, /* OMAP24XX_DMA_MMC1_TX */ + { .name = "rx", .dma_req = 62 }, /* OMAP24XX_DMA_MMC1_RX */ + { .dma_req = -1 } +}; + +static struct omap_hwmod omap2420_msdi1_hwmod = { + .name = "msdi1", + .class = &omap2420_msdi_hwmod_class, + .mpu_irqs = omap2420_msdi1_irqs, + .sdma_reqs = omap2420_msdi1_sdma_reqs, + .main_clk = "mmc_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP2420_EN_MMC_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP2420_ST_MMC_SHIFT, + }, + }, + .flags = HWMOD_16BIT_REG, +}; + /* * interfaces */ @@ -428,6 +473,24 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_addr_space omap2420_msdi1_addrs[] = { + { + .pa_start = 0x4809c000, + .pa_end = 0x4809c000 + SZ_128 - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_core -> msdi1 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__msdi1 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2420_msdi1_hwmod, + .clk = "mmc_ick", + .addr = omap2420_msdi1_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2xxx_l3_main__l4_core, &omap2xxx_mpu__l3_main, @@ -468,6 +531,7 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2420_l4_core__mailbox, &omap2420_l4_core__mcbsp1, &omap2420_l4_core__mcbsp2, + &omap2420_l4_core__msdi1, NULL, }; diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 7a38750..3e7ae0f 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -16,6 +16,7 @@ #include #include +#include #define OMAP15XX_NR_MMC 1 #define OMAP16XX_NR_MMC 2 @@ -195,4 +196,7 @@ static inline int omap_mmc_add(const char *name, int id, unsigned long base, } #endif + +extern int omap_msdi_reset(struct omap_hwmod *oh); + #endif -- cgit v0.10.2 From 9e1b7498d79ab9076791807172d4603c7be63c1b Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 8 May 2012 11:34:27 -0600 Subject: ARM: OMAP2+: HDQ1W: add custom reset function Implement a custom reset function for the HDQ1W IP block. This is because the HDQ1W IP block, like I2C, has an internal clock gating bit that needs to be toggled after setting the SOFTRESET bit to allow the reset to propagate. Signed-off-by: Paul Walmsley Cc: NeilBrown Cc: Avinash.H.M Tested-by: NeilBrown diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 4eee0f1..385c083 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o display.o i2c.o + common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap-2-3-common = irq.o sdrc.o hwmod-common = omap_hwmod.o \ diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c new file mode 100644 index 0000000..297ebe0 --- /dev/null +++ b/arch/arm/mach-omap2/hdq1w.c @@ -0,0 +1,72 @@ +/* + * IP block integration code for the HDQ1W/1-wire IP block + * + * Copyright (C) 2012 Texas Instruments, Inc. + * Paul Walmsley + * + * Based on the I2C reset code in arch/arm/mach-omap2/i2c.c by + * Avinash.H.M + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include + +#include "common.h" + +/* Maximum microseconds to wait for OMAP module to softreset */ +#define MAX_MODULE_SOFTRESET_WAIT 10000 + +/** + * omap_hdq1w_reset - reset the OMAP HDQ1W module + * @oh: struct omap_hwmod * + * + * OCP soft reset the HDQ1W IP block. Section 20.6.1.4 "HDQ1W/1-Wire + * Software Reset" of the OMAP34xx Technical Reference Manual Revision + * ZR (SWPU223R) does not include the rather important fact that, for + * the reset to succeed, the HDQ1W module's internal clock gate must be + * programmed to allow the clock to propagate to the rest of the + * module. In this sense, it's rather similar to the I2C custom reset + * function. Returns 0. + */ +int omap_hdq1w_reset(struct omap_hwmod *oh) +{ + u32 v; + int c = 0; + + /* Write to the SOFTRESET bit */ + omap_hwmod_softreset(oh); + + /* Enable the module's internal clocks */ + v = omap_hwmod_read(oh, HDQ_CTRL_STATUS_OFFSET); + v |= 1 << HDQ_CTRL_STATUS_CLOCKENABLE_SHIFT; + omap_hwmod_write(v, oh, HDQ_CTRL_STATUS_OFFSET); + + /* Poll on RESETDONE bit */ + omap_test_timeout((omap_hwmod_read(oh, + oh->class->sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + + if (c == MAX_MODULE_SOFTRESET_WAIT) + pr_warning("%s: %s: softreset failed (waited %d usec)\n", + __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); + else + pr_debug("%s: %s: softreset in %d usec\n", __func__, + oh->name, c); + + return 0; +} diff --git a/arch/arm/plat-omap/include/plat/hdq1w.h b/arch/arm/plat-omap/include/plat/hdq1w.h new file mode 100644 index 0000000..0c1efc8 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/hdq1w.h @@ -0,0 +1,36 @@ +/* + * Shared macros and function prototypes for the HDQ1W/1-wire IP block + * + * Copyright (C) 2012 Texas Instruments, Inc. + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ +#ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H +#define ARCH_ARM_MACH_OMAP2_HDQ1W_H + +#include + +/* + * XXX A future cleanup patch should modify + * drivers/w1/masters/omap_hdq.c to use these macros + */ +#define HDQ_CTRL_STATUS_OFFSET 0x0c +#define HDQ_CTRL_STATUS_CLOCKENABLE_SHIFT 5 + + +extern int omap_hdq1w_reset(struct omap_hwmod *oh); + +#endif -- cgit v0.10.2 From 03d830e8dcbe4e8168a85252fcb639b48342ed3c Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 8 May 2012 11:34:27 -0600 Subject: ARM: OMAP2+: hwmod data: add HDQ/1-wire hwmod shared data Much of the HDQ1W integration data is common between multiple generations of OMAP SoCs, so rather than make several copies, we add it once into files which are compiled for multiple SoCs. Signed-off-by: Paul Walmsley Cc: NeilBrown Tested-by: NeilBrown diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c index 04637fa..cbb4ef6 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c @@ -171,3 +171,12 @@ struct omap_hwmod_addr_space omap2_mcbsp1_addrs[] = { }, { } }; + +struct omap_hwmod_addr_space omap2_hdq1w_addr_space[] = { + { + .pa_start = 0x480b2000, + .pa_end = 0x480b2fff, + .flags = ADDR_TYPE_RT, + }, + { } +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index f08e442..102d76e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -2,6 +2,7 @@ * omap_hwmod_2xxx_3xxx_ipblock_data.c - common IP block data for OMAP2/3 * * Copyright (C) 2011 Nokia Corporation + * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley * * This program is free software; you can redistribute it and/or modify @@ -12,6 +13,7 @@ #include #include #include +#include #include @@ -302,3 +304,23 @@ struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = { { .irq = -1 } }; +struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x14, + .syss_offs = 0x18, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_hdq1w_class = { + .name = "hdq1w", + .sysc = &omap2_hdq1w_sysc, + .reset = &omap_hdq1w_reset, +}; + +struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[] = { + { .irq = 58, }, + { .irq = -1 } +}; + diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 7aa9156..e244829 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -38,6 +38,7 @@ extern struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[]; extern struct omap_hwmod_addr_space omap2_dma_system_addrs[]; extern struct omap_hwmod_addr_space omap2_mailbox_addrs[]; extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[]; +extern struct omap_hwmod_addr_space omap2_hdq1w_addr_space[]; /* Common IP block data across OMAP2xxx */ extern struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[]; @@ -141,6 +142,7 @@ extern struct omap_hwmod_irq_info omap2_dma_system_irqs[]; extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[]; extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[]; extern struct omap_hwmod_addr_space omap2xxx_timer12_addrs[]; +extern struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[]; /* OMAP hwmod classes - forward declarations */ extern struct omap_hwmod_class l3_hwmod_class; @@ -152,6 +154,8 @@ extern struct omap_hwmod_class omap2_dss_hwmod_class; extern struct omap_hwmod_class omap2_dispc_hwmod_class; extern struct omap_hwmod_class omap2_rfbi_hwmod_class; extern struct omap_hwmod_class omap2_venc_hwmod_class; +extern struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc; +extern struct omap_hwmod_class omap2_hdq1w_class; extern struct omap_hwmod_class omap2xxx_timer_hwmod_class; extern struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class; -- cgit v0.10.2 From 45a4bb067c25355b5d362eb09fa97e51a2a519c8 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 8 May 2012 11:34:28 -0600 Subject: ARM: OMAP3: hwmod data: add HDQ/1-wire hwmod Add the HDQ1W hwmod for OMAP34xx, OMAP36xx, and AM3505/3517 devices. According to the respective TRMs, it doesn't appear to be available for the 816x/814x or the AM335x. The OCPIF_SWSUP_IDLE flag is added to work around an apparent hardware bug: the hardware is not taking the CM_FCLKEN*_CORE.EN_HDQ bit into account when considering whether to go idle: http://www.spinics.net/lists/linux-omap/msg63576.html This causes HDQ transfers to fail or become corrupt. Thanks to NeilBrown for his help diagnosing and testing fixes for this problem. Signed-off-by: Paul Walmsley Cc: NeilBrown Tested-by: NeilBrown diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 0c65079..97c6597 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1980,6 +1980,22 @@ static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { }, }; +static struct omap_hwmod omap3xxx_hdq1w_hwmod = { + .name = "hdq1w", + .mpu_irqs = omap2_hdq1w_mpu_irqs, + .main_clk = "hdq_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_HDQ_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_HDQ_SHIFT, + }, + }, + .class = &omap2_hdq1w_class, +}; + /* * interfaces */ @@ -3059,6 +3075,16 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_core -> hdq1w interface */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__hdq1w = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_hdq1w_hwmod, + .clk = "hdq_ick", + .addr = omap2_hdq1w_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, + .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE, +}; + static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l3_main__l4_core, &omap3xxx_l3_main__l4_per, @@ -3151,6 +3177,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = { &omap34xx_l4_core__sr1, &omap34xx_l4_core__sr2, &omap3xxx_l4_core__mailbox, + &omap3xxx_l4_core__hdq1w, NULL }; @@ -3170,6 +3197,7 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__usb_tll_hs, &omap3xxx_l4_core__es3plus_mmc1, &omap3xxx_l4_core__es3plus_mmc2, + &omap3xxx_l4_core__hdq1w, NULL }; -- cgit v0.10.2 From f32bd7787561ceb887e45d81ca41d6c7a903751f Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 8 May 2012 11:34:28 -0600 Subject: ARM: OMAP2xxx: hwmod data: add HDQ/1-wire hwmod Add the HDQ1W hwmod for all OMAP2xxx devices. Assume that OMAP2xxx chips have the same HDQ idle handling bug as OMAP3: http://www.spinics.net/lists/linux-omap/msg63576.html and set the OCPIF_SWSUP_IDLE flag accordingly on the HDQ's OCP interface. Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 0c08d3f..85419f8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -284,6 +284,23 @@ static struct omap_hwmod omap2420_msdi1_hwmod = { .flags = HWMOD_16BIT_REG, }; +/* HDQ1W/1-wire */ +static struct omap_hwmod omap2420_hdq1w_hwmod = { + .name = "hdq1w", + .mpu_irqs = omap2_hdq1w_mpu_irqs, + .main_clk = "hdq_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_HDQ_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_HDQ_SHIFT, + }, + }, + .class = &omap2_hdq1w_class, +}; + /* * interfaces */ @@ -491,6 +508,17 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__msdi1 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_core -> hdq1w interface */ +static struct omap_hwmod_ocp_if omap2420_l4_core__hdq1w = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2420_hdq1w_hwmod, + .clk = "hdq_ick", + .addr = omap2_hdq1w_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, + .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE, +}; + + static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2xxx_l3_main__l4_core, &omap2xxx_mpu__l3_main, @@ -532,6 +560,7 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2420_l4_core__mcbsp1, &omap2420_l4_core__mcbsp2, &omap2420_l4_core__msdi1, + &omap2420_l4_core__hdq1w, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 71d9f88..ff93a8d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -528,6 +528,23 @@ static struct omap_hwmod omap2430_mmc2_hwmod = { .class = &omap2430_mmc_class, }; +/* HDQ1W/1-wire */ +static struct omap_hwmod omap2430_hdq1w_hwmod = { + .name = "hdq1w", + .mpu_irqs = omap2_hdq1w_mpu_irqs, + .main_clk = "hdq_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_HDQ_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_HDQ_SHIFT, + }, + }, + .class = &omap2_hdq1w_class, +}; + /* * interfaces */ @@ -838,6 +855,16 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_core -> hdq1w */ +static struct omap_hwmod_ocp_if omap2430_l4_core__hdq1w = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_hdq1w_hwmod, + .clk = "hdq_ick", + .addr = omap2_hdq1w_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, + .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE, +}; + static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { &omap2xxx_l3_main__l4_core, &omap2xxx_mpu__l3_main, @@ -886,6 +913,7 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { &omap2430_l4_core__mcbsp3, &omap2430_l4_core__mcbsp4, &omap2430_l4_core__mcbsp5, + &omap2430_l4_core__hdq1w, NULL, }; -- cgit v0.10.2 From 1c2badc1617661632034d8be5d22c8637b626cb7 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 8 May 2012 11:34:28 -0600 Subject: ARM: OMAP3: hwmod_data: Rename the common irq for McBSP ports Use 'common' as name for the common irq number in hwmod data for the McBSP ports. The same name already in use for OMAP2430, and the OMAP4 hwmod data will be using the same name. Signed-off-by: Peter Ujfalusi Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 97c6597..87742e2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1075,7 +1075,7 @@ static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = { /* mcbsp1 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = { - { .name = "irq", .irq = 16 }, + { .name = "common", .irq = 16 }, { .name = "tx", .irq = 59 }, { .name = "rx", .irq = 60 }, { .irq = -1 } @@ -1100,7 +1100,7 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { /* mcbsp2 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = { - { .name = "irq", .irq = 17 }, + { .name = "common", .irq = 17 }, { .name = "tx", .irq = 62 }, { .name = "rx", .irq = 63 }, { .irq = -1 } @@ -1130,7 +1130,7 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { /* mcbsp3 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = { - { .name = "irq", .irq = 22 }, + { .name = "common", .irq = 22 }, { .name = "tx", .irq = 89 }, { .name = "rx", .irq = 90 }, { .irq = -1 } @@ -1160,7 +1160,7 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { /* mcbsp4 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = { - { .name = "irq", .irq = 23 }, + { .name = "common", .irq = 23 }, { .name = "tx", .irq = 54 }, { .name = "rx", .irq = 55 }, { .irq = -1 } @@ -1191,7 +1191,7 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { /* mcbsp5 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = { - { .name = "irq", .irq = 27 }, + { .name = "common", .irq = 27 }, { .name = "tx", .irq = 81 }, { .name = "rx", .irq = 82 }, { .irq = -1 } -- cgit v0.10.2 From aa8f6cefa1e0ba79deaf76c5a790ad167659c311 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Tue, 8 May 2012 11:34:29 -0600 Subject: ARM: OMAP4: hwmod data: I2C: add flag for context restore Restore of context is not done for OMAP4. This patch adds the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE in the OMAP4 hwmod data which activates the restore for OMAP4. Currently the OMAP4 does not hit device off still the driver may have support for it. Cc: Benoit Cousson Cc: Paul Wamsley Reviewed-by: Kevin Hilman Signed-off-by: Shubhrajyoti D Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 4906129..3a67ed0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1487,7 +1487,8 @@ static struct omap_hwmod_class omap44xx_i2c_hwmod_class = { }; static struct omap_i2c_dev_attr i2c_dev_attr = { - .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE, + .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE | + OMAP_I2C_FLAG_RESET_REGS_POSTIDLE, }; /* i2c1 */ -- cgit v0.10.2 From 437e897083d9e42195c13a96a5bc4d8871649a19 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 8 May 2012 11:34:29 -0600 Subject: ARM: OMAP4: hwmod_data: Name the common irq for McBSP ports Use 'common' as name for the common irq number in hwmod data for the McBSP ports. The same name already in use for OMAP2430, and OMAP3. Signed-off-by: Peter Ujfalusi Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3a67ed0..c997c97 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1912,7 +1912,7 @@ static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = { /* mcbsp1 */ static struct omap_hwmod_irq_info omap44xx_mcbsp1_irqs[] = { - { .irq = 17 + OMAP44XX_IRQ_GIC_START }, + { .name = "common", .irq = 17 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; @@ -1947,7 +1947,7 @@ static struct omap_hwmod omap44xx_mcbsp1_hwmod = { /* mcbsp2 */ static struct omap_hwmod_irq_info omap44xx_mcbsp2_irqs[] = { - { .irq = 22 + OMAP44XX_IRQ_GIC_START }, + { .name = "common", .irq = 22 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; @@ -1982,7 +1982,7 @@ static struct omap_hwmod omap44xx_mcbsp2_hwmod = { /* mcbsp3 */ static struct omap_hwmod_irq_info omap44xx_mcbsp3_irqs[] = { - { .irq = 23 + OMAP44XX_IRQ_GIC_START }, + { .name = "common", .irq = 23 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; @@ -2017,7 +2017,7 @@ static struct omap_hwmod omap44xx_mcbsp3_hwmod = { /* mcbsp4 */ static struct omap_hwmod_irq_info omap44xx_mcbsp4_irqs[] = { - { .irq = 16 + OMAP44XX_IRQ_GIC_START }, + { .name = "common", .irq = 16 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -- cgit v0.10.2 From c8d82ff68fb6873691536cf33021977efbf5593c Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 8 May 2012 11:34:30 -0600 Subject: ARM: OMAP2/3: hwmod data: Add 32k-sync timer data to hwmod database Add 32k-sync timer hwmod-data and add ocp_if details to omap2 & 3 hwmod table. Signed-off-by: Vaibhav Hiremath Signed-off-by: Felipe Balbi Reviewed-by: Santosh Shilimkar Cc: Benoit Cousson Cc: Tony Lindgren Cc: Paul Walmsley Cc: Kevin Hilman Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 85419f8..a7640d1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -519,6 +519,24 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__hdq1w = { }; +/* l4_wkup -> 32ksync_counter */ +static struct omap_hwmod_addr_space omap2420_counter_32k_addrs[] = { + { + .pa_start = 0x48004000, + .pa_end = 0x4800401f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = { + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_counter_32k_hwmod, + .clk = "sync_32k_ick", + .addr = omap2420_counter_32k_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2xxx_l3_main__l4_core, &omap2xxx_mpu__l3_main, @@ -561,6 +579,7 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2420_l4_core__mcbsp2, &omap2420_l4_core__msdi1, &omap2420_l4_core__hdq1w, + &omap2420_l4_wkup__counter_32k, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index ff93a8d..4d72649 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -865,6 +865,24 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__hdq1w = { .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE, }; +/* l4_wkup -> 32ksync_counter */ +static struct omap_hwmod_addr_space omap2430_counter_32k_addrs[] = { + { + .pa_start = 0x49020000, + .pa_end = 0x4902001f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap2430_l4_wkup__counter_32k = { + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_counter_32k_hwmod, + .clk = "sync_32k_ick", + .addr = omap2430_counter_32k_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { &omap2xxx_l3_main__l4_core, &omap2xxx_mpu__l3_main, @@ -914,6 +932,7 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { &omap2430_l4_core__mcbsp4, &omap2430_l4_core__mcbsp5, &omap2430_l4_core__hdq1w, + &omap2430_l4_wkup__counter_32k, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 45aaa07..5941f14 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -732,3 +732,23 @@ struct omap_hwmod omap2xxx_mcspi2_hwmod = { .class = &omap2xxx_mcspi_class, .dev_attr = &omap_mcspi2_dev_attr, }; + + +static struct omap_hwmod_class omap2xxx_counter_hwmod_class = { + .name = "counter", +}; + +struct omap_hwmod omap2xxx_counter_32k_hwmod = { + .name = "counter_32k", + .main_clk = "func_32k_ck", + .prcm = { + .omap2 = { + .module_offs = WKUP_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_ST_32KSYNC_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_32KSYNC_SHIFT, + }, + }, + .class = &omap2xxx_counter_hwmod_class, +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 87742e2..2432574 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1997,6 +1997,40 @@ static struct omap_hwmod omap3xxx_hdq1w_hwmod = { }; /* + * '32K sync counter' class + * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock + */ +static struct omap_hwmod_class_sysconfig omap3xxx_counter_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0004, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_counter_hwmod_class = { + .name = "counter", + .sysc = &omap3xxx_counter_sysc, +}; + +static struct omap_hwmod omap3xxx_counter_32k_hwmod = { + .name = "counter_32k", + .class = &omap3xxx_counter_hwmod_class, + .clkdm_name = "wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE, + .main_clk = "wkup_32k_fck", + .prcm = { + .omap2 = { + .module_offs = WKUP_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_ST_32KSYNC_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_32KSYNC_SHIFT, + }, + }, +}; + +/* * interfaces */ @@ -3085,6 +3119,24 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__hdq1w = { .flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE, }; +/* l4_wkup -> 32ksync_counter */ +static struct omap_hwmod_addr_space omap3xxx_counter_32k_addrs[] = { + { + .pa_start = 0x48320000, + .pa_end = 0x4832001f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = { + .master = &omap3xxx_l4_wkup_hwmod, + .slave = &omap3xxx_counter_32k_hwmod, + .clk = "omap_32ksync_ick", + .addr = omap3xxx_counter_32k_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l3_main__l4_core, &omap3xxx_l3_main__l4_per, @@ -3129,6 +3181,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap34xx_l4_core__mcspi2, &omap34xx_l4_core__mcspi3, &omap34xx_l4_core__mcspi4, + &omap3xxx_l4_wkup__counter_32k, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index e244829..e7e8eea 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -75,6 +75,7 @@ extern struct omap_hwmod omap2xxx_gpio3_hwmod; extern struct omap_hwmod omap2xxx_gpio4_hwmod; extern struct omap_hwmod omap2xxx_mcspi1_hwmod; extern struct omap_hwmod omap2xxx_mcspi2_hwmod; +extern struct omap_hwmod omap2xxx_counter_32k_hwmod; /* Common interface data across OMAP2xxx */ extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core; -- cgit v0.10.2 From 414e41286e3aeb87de140ef4c75100f9344c32b2 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 8 May 2012 11:34:30 -0600 Subject: ARM: OMAP2+: WDTIMER integration: fix !PM boot crash, disarm timer after hwmod reset Without runtime PM enabled, hwmod needs to leave all IP blocks in an enabled state by default so any driver access to the HW will succeed. This is accomplished by seting the postsetup_state to enabled for all hwmods during init when runtime PM is disabled. Currently, we have a special case for WDT in that its postsetup_state is always set to disabled. This is done so that the WDT is disabled and the timer is disarmed at boot in case there is no WDT driver. This also means that when runtime PM is disabled, if a WDT driver *is* built in the kernel, the kernel will crash on the first access to the WDT hardware. We can't simply leave the WDT module enabled, because the timer is armed by default after reset. That means that if there is no WDT driver initialzed or loaded before the timer expires, the kernel will reboot. To fix this, a custom reset method is added to the watchdog class of omap_hwmod. This method will *always* disarm the timer after hwmod reset. The WDT timer then will only be rearmed when/if the driver is loaded for the WDT. With the timer disarmed by default, we no longer need a special-case for the postsetup_state of WDT during init, so it is removed. Any platforms wishing to ensure the watchdog remains armed across the entire boot boot can simply disable the reset-on-init feature of the watchdog hwmod using omap_hwmod_no_setup_reset(). Tested on 3530/Overo, 4430/Panda. NOTE: on 4430, the hwmod OCP reset does not seem to rearm the timer as documented in the TRM (and what happens on OMAP3.) I noticed this because testing the HWMOD_INIT_NO_RESET feature with no driver loaded, I expected a reboot part way through the boot, but did not see a reboot. Adding some debug to read the counter, I verified that right after OCP softreset, the counter is not firing. After writing the magic start sequence, the timer starts counting. This means that the timer disarm sequence added here does not seem to be needed for 4430, but is technically the correct way to ensure the timer is disarmed, so it is left in for OMAP4. Special thanks to Paul Walmsley for helping brainstorm ideas to fix this problem. Cc: Paul Walmsley Signed-off-by: Kevin Hilman Cc: Santosh Shilimkar Acked-by: Santosh Shilimkar [paul@pwsan.com: updated the omap2_wd_timer_reset() function in the wake of commit 3c55c1baffa5f719eb2ae9729088bc867f972f53 ("ARM: OMAP2+: hwmod: Revert "ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status""); added kerneldoc; rolled in warning fix from Kevin] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 065bd76..fafcc35 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -363,24 +363,6 @@ static void __init omap_hwmod_init_postsetup(void) #endif omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state); - /* - * Set the default postsetup state for unusual modules (like - * MPU WDT). - * - * The postsetup_state is not actually used until - * omap_hwmod_late_init(), so boards that desire full watchdog - * coverage of kernel initialization can reprogram the - * postsetup_state between the calls to - * omap2_init_common_infra() and omap_sdrc_init(). - * - * XXX ideally we could detect whether the MPU WDT was currently - * enabled here and make this conditional - */ - postsetup_state = _HWMOD_STATE_DISABLED; - omap_hwmod_for_each_by_class("wd_timer", - _set_hwmod_postsetup_state, - &postsetup_state); - omap_pm_if_early_init(); } diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 5941f14..83eafd9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -89,7 +89,8 @@ static struct omap_hwmod_class_sysconfig omap2xxx_wd_timer_sysc = { struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class = { .name = "wd_timer", .sysc = &omap2xxx_wd_timer_sysc, - .pre_shutdown = &omap2_wd_timer_disable + .pre_shutdown = &omap2_wd_timer_disable, + .reset = &omap2_wd_timer_reset, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 2432574..fd48797 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -418,7 +418,8 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = { static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = { .name = "wd_timer", .sysc = &omap3xxx_wd_timer_sysc, - .pre_shutdown = &omap2_wd_timer_disable + .pre_shutdown = &omap2_wd_timer_disable, + .reset = &omap2_wd_timer_reset, }; static struct omap_hwmod omap3xxx_wd_timer2_hwmod = { diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index c997c97..950454a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3535,6 +3535,7 @@ static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = { .name = "wd_timer", .sysc = &omap44xx_wd_timer_sysc, .pre_shutdown = &omap2_wd_timer_disable, + .reset = &omap2_wd_timer_reset, }; /* wd_timer2 */ diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index 4067669..b2f1c67 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -14,6 +14,7 @@ #include #include "wd_timer.h" +#include "common.h" /* * In order to avoid any assumptions from bootloader regarding WDT @@ -25,6 +26,8 @@ #define OMAP_WDT_WPS 0x34 #define OMAP_WDT_SPR 0x48 +/* Maximum microseconds to wait for OMAP module to softreset */ +#define MAX_MODULE_SOFTRESET_WAIT 10000 int omap2_wd_timer_disable(struct omap_hwmod *oh) { @@ -54,3 +57,45 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh) return 0; } +/** + * omap2_wdtimer_reset - reset and disable the WDTIMER IP block + * @oh: struct omap_hwmod * + * + * After the WDTIMER IP blocks are reset on OMAP2/3, we must also take + * care to execute the special watchdog disable sequence. This is + * because the watchdog is re-armed upon OCP softreset. (On OMAP4, + * this behavior was apparently changed and the watchdog is no longer + * re-armed after an OCP soft-reset.) Returns -ETIMEDOUT if the reset + * did not complete, or 0 upon success. + * + * XXX Most of this code should be moved to the omap_hwmod.c layer + * during a normal merge window. omap_hwmod_softreset() should be + * renamed to omap_hwmod_set_ocp_softreset(), and omap_hwmod_softreset() + * should call the hwmod _ocp_softreset() code. + */ +int omap2_wd_timer_reset(struct omap_hwmod *oh) +{ + int c = 0; + + /* Write to the SOFTRESET bit */ + omap_hwmod_softreset(oh); + + /* Poll on RESETDONE bit */ + omap_test_timeout((omap_hwmod_read(oh, + oh->class->sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + + if (oh->class->sysc->srst_udelay) + udelay(oh->class->sysc->srst_udelay); + + if (c == MAX_MODULE_SOFTRESET_WAIT) + pr_warning("%s: %s: softreset failed (waited %d usec)\n", + __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); + else + pr_debug("%s: %s: softreset in %d usec\n", __func__, + oh->name, c); + + return (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : + omap2_wd_timer_disable(oh); +} diff --git a/arch/arm/mach-omap2/wd_timer.h b/arch/arm/mach-omap2/wd_timer.h index e0054a2..f6bbba7 100644 --- a/arch/arm/mach-omap2/wd_timer.h +++ b/arch/arm/mach-omap2/wd_timer.h @@ -13,5 +13,6 @@ #include extern int omap2_wd_timer_disable(struct omap_hwmod *oh); +extern int omap2_wd_timer_reset(struct omap_hwmod *oh); #endif -- cgit v0.10.2 From fcc76a85061d4dbc0accabe252c8f3496e72efe1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 9 May 2012 09:59:25 -0700 Subject: ARM: OMAP1: Move omap_init_audio() to keep the devices in alphabetical order The comments in omap1_init_devices() ask to keep the devices in alphabetical order. Only omap_init_audio() is not following this, so let's move it. No functional changes. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index dcd8ddb..51387a4 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -31,6 +31,22 @@ #include "common.h" #include "clock.h" +#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) + +static struct platform_device omap_pcm = { + .name = "omap-pcm-audio", + .id = -1, +}; + +static void omap_init_audio(void) +{ + platform_device_register(&omap_pcm); +} + +#else +static inline void omap_init_audio(void) {} +#endif + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE) @@ -242,24 +258,6 @@ void __init omap1_camera_init(void *info) static inline void omap_init_sti(void) {} -#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) - -static struct platform_device omap_pcm = { - .name = "omap-pcm-audio", - .id = -1, -}; - -static void omap_init_audio(void) -{ - platform_device_register(&omap_pcm); -} - -#else -static inline void omap_init_audio(void) {} -#endif - -/*-------------------------------------------------------------------------*/ - /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): @@ -292,11 +290,11 @@ static int __init omap1_init_devices(void) * in alphabetical order so they're easier to sort through. */ + omap_init_audio(); omap_init_mbox(); omap_init_rtc(); omap_init_spi100k(); omap_init_sti(); - omap_init_audio(); return 0; } -- cgit v0.10.2 From 49b1a616a77d02b2b0034e0a5ad4bc2e565f2c58 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 9 May 2012 09:59:25 -0700 Subject: ARM: OMAP1: Move omap_init_uwire to mach-omap1 This hardware exists on omap1 only and there's no need to keep it in plat-omap/devices.c. No functional changes. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 51387a4..b853f61 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -258,6 +258,49 @@ void __init omap1_camera_init(void *info) static inline void omap_init_sti(void) {} +/* Numbering for the SPI-capable controllers when used for SPI: + * spi = 1 + * uwire = 2 + * mmc1..2 = 3..4 + * mcbsp1..3 = 5..7 + */ + +#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE) + +#define OMAP_UWIRE_BASE 0xfffb3000 + +static struct resource uwire_resources[] = { + { + .start = OMAP_UWIRE_BASE, + .end = OMAP_UWIRE_BASE + 0x20, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_uwire_device = { + .name = "omap_uwire", + .id = -1, + .num_resources = ARRAY_SIZE(uwire_resources), + .resource = uwire_resources, +}; + +static void omap_init_uwire(void) +{ + /* FIXME define and use a boot tag; not all boards will be hooking + * up devices to the microwire controller, and multi-board configs + * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway... + */ + + /* board-specific code must configure chipselects (only a few + * are normally used) and SCLK/SDI/SDO (each has two choices). + */ + (void) platform_device_register(&omap_uwire_device); +} +#else +static inline void omap_init_uwire(void) {} +#endif + + /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): @@ -295,6 +338,7 @@ static int __init omap1_init_devices(void) omap_init_rtc(); omap_init_spi100k(); omap_init_sti(); + omap_init_uwire(); return 0; } diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 09b07d2..16c9ebe 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -109,50 +109,6 @@ static void omap_init_rng(void) static inline void omap_init_rng(void) {} #endif -/*-------------------------------------------------------------------------*/ - -/* Numbering for the SPI-capable controllers when used for SPI: - * spi = 1 - * uwire = 2 - * mmc1..2 = 3..4 - * mcbsp1..3 = 5..7 - */ - -#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE) - -#define OMAP_UWIRE_BASE 0xfffb3000 - -static struct resource uwire_resources[] = { - { - .start = OMAP_UWIRE_BASE, - .end = OMAP_UWIRE_BASE + 0x20, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_uwire_device = { - .name = "omap_uwire", - .id = -1, - .num_resources = ARRAY_SIZE(uwire_resources), - .resource = uwire_resources, -}; - -static void omap_init_uwire(void) -{ - /* FIXME define and use a boot tag; not all boards will be hooking - * up devices to the microwire controller, and multi-board configs - * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway... - */ - - /* board-specific code must configure chipselects (only a few - * are normally used) and SCLK/SDI/SDO (each has two choices). - */ - (void) platform_device_register(&omap_uwire_device); -} -#else -static inline void omap_init_uwire(void) {} -#endif - #if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE) static phys_addr_t omap_dsp_phys_mempool_base; @@ -208,7 +164,6 @@ static int __init omap_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_init_rng(); - omap_init_uwire(); return 0; } arch_initcall(omap_init_devices); -- cgit v0.10.2 From 7f28427b85d1c5371f996b1390a9d6e9620b67ad Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 9 May 2012 09:59:26 -0700 Subject: ARM: OMAP2+: Move omap_dsp_reserve_sdram_memblock() to mach-omap2 This hardware exists only on 2430 and later omaps, so there's no need to have it in plat-omap/devices.c. Note that we don't have any users for exported omap_dsp_get_mempool_base(), so we can make it static. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 3376388..845309f 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -28,8 +28,6 @@ #include -extern phys_addr_t omap_dsp_get_mempool_base(void); - static struct platform_device *omap_dsp_pdev; static struct omap_dsp_platform_data omap_dsp_pdata __initdata = { @@ -47,6 +45,31 @@ static struct omap_dsp_platform_data omap_dsp_pdata __initdata = { .dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits, }; +static phys_addr_t omap_dsp_phys_mempool_base; + +void __init omap_dsp_reserve_sdram_memblock(void) +{ + phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE; + phys_addr_t paddr; + + if (!size) + return; + + paddr = arm_memblock_steal(size, SZ_1M); + if (!paddr) { + pr_err("%s: failed to reserve %llx bytes\n", + __func__, (unsigned long long)size); + return; + } + + omap_dsp_phys_mempool_base = paddr; +} + +static phys_addr_t omap_dsp_get_mempool_base(void) +{ + return omap_dsp_phys_mempool_base; +} + static int __init omap_dsp_init(void) { struct platform_device *pdev; diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 16c9ebe..1151d0b 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -109,35 +109,6 @@ static void omap_init_rng(void) static inline void omap_init_rng(void) {} #endif -#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE) - -static phys_addr_t omap_dsp_phys_mempool_base; - -void __init omap_dsp_reserve_sdram_memblock(void) -{ - phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE; - phys_addr_t paddr; - - if (!size) - return; - - paddr = arm_memblock_steal(size, SZ_1M); - if (!paddr) { - pr_err("%s: failed to reserve %llx bytes\n", - __func__, (unsigned long long)size); - return; - } - - omap_dsp_phys_mempool_base = paddr; -} - -phys_addr_t omap_dsp_get_mempool_base(void) -{ - return omap_dsp_phys_mempool_base; -} -EXPORT_SYMBOL(omap_dsp_get_mempool_base); -#endif - /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): -- cgit v0.10.2 From 2fdad5c971ad7991d1798866ae0cb25846155423 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 23 Apr 2012 15:56:36 -0700 Subject: ARM: OMAP2: Use hwmod to initialize mmc for 2420 This allows us to pass dma request lines in platform data to MMC driver the same way as we already do for omap2430 and later. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index e433603..3318f67 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -616,7 +616,11 @@ static inline void omap242x_mmc_mux(struct omap_mmc_platform_data void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) { - char *name = "mmci-omap"; + struct platform_device *pdev; + struct omap_hwmod *oh; + int id = 0; + char *oh_name = "msdi1"; + char *dev_name = "mmci-omap"; if (!mmc_data[0]) { pr_err("%s fails: Incomplete platform data\n", __func__); @@ -624,8 +628,17 @@ void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) } omap242x_mmc_mux(mmc_data[0]); - omap_mmc_add(name, 0, OMAP2_MMC1_BASE, OMAP2420_MMC_SIZE, - INT_24XX_MMC_IRQ, mmc_data[0]); + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + return; + } + pdev = omap_device_build(dev_name, id, oh, mmc_data[0], + sizeof(struct omap_mmc_platform_data), NULL, 0, 0); + if (IS_ERR(pdev)) + WARN(1, "Can'd build omap_device for %s:%s.\n", + dev_name, oh->name); } #endif -- cgit v0.10.2 From 5ff391d8ac555486de8af083068b94a66d32f4c2 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 23 Apr 2012 15:56:36 -0700 Subject: ARM: OMAP: Move omap_mmc_add() to mach-omap1 Now that omap2420 is using hwmod for MMC, this code is omap1 only used on omap1. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index b853f61..2192676 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -144,6 +144,49 @@ static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller, } } +#define OMAP_MMC_NR_RES 2 + +/* + * Register MMC devices. + */ +static int __init omap_mmc_add(const char *name, int id, unsigned long base, + unsigned long size, unsigned int irq, + struct omap_mmc_platform_data *data) +{ + struct platform_device *pdev; + struct resource res[OMAP_MMC_NR_RES]; + int ret; + + pdev = platform_device_alloc(name, id); + if (!pdev) + return -ENOMEM; + + memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource)); + res[0].start = base; + res[0].end = base + size - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = res[1].end = irq; + res[1].flags = IORESOURCE_IRQ; + + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); + if (ret == 0) + ret = platform_device_add_data(pdev, data, sizeof(*data)); + if (ret) + goto fail; + + ret = platform_device_add(pdev); + if (ret) + goto fail; + + /* return device handle to board setup code */ + data->dev = &pdev->dev; + return 0; + +fail: + platform_device_put(pdev); + return ret; +} + void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) { diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 1151d0b..1cba927 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -28,54 +28,6 @@ #include #include -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ - defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) - -#define OMAP_MMC_NR_RES 2 - -/* - * Register MMC devices. Called from mach-omap1 and mach-omap2 device init. - */ -int __init omap_mmc_add(const char *name, int id, unsigned long base, - unsigned long size, unsigned int irq, - struct omap_mmc_platform_data *data) -{ - struct platform_device *pdev; - struct resource res[OMAP_MMC_NR_RES]; - int ret; - - pdev = platform_device_alloc(name, id); - if (!pdev) - return -ENOMEM; - - memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource)); - res[0].start = base; - res[0].end = base + size - 1; - res[0].flags = IORESOURCE_MEM; - res[1].start = res[1].end = irq; - res[1].flags = IORESOURCE_IRQ; - - ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); - if (ret == 0) - ret = platform_device_add_data(pdev, data, sizeof(*data)); - if (ret) - goto fail; - - ret = platform_device_add(pdev); - if (ret) - goto fail; - - /* return device handle to board setup code */ - data->dev = &pdev->dev; - return 0; - -fail: - platform_device_put(pdev); - return ret; -} - -#endif - /*-------------------------------------------------------------------------*/ #if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 3e7ae0f..a7754a8 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -177,9 +177,6 @@ extern void omap_mmc_notify_cover_event(struct device *dev, int slot, void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); -int omap_mmc_add(const char *name, int id, unsigned long base, - unsigned long size, unsigned int irq, - struct omap_mmc_platform_data *data); #else static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) @@ -188,12 +185,6 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) { } -static inline int omap_mmc_add(const char *name, int id, unsigned long base, - unsigned long size, unsigned int irq, - struct omap_mmc_platform_data *data) -{ - return 0; -} #endif -- cgit v0.10.2 From 6c432f72b2bd75f7c427eec5558c72f62b35d4a0 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 23 Apr 2012 15:56:37 -0700 Subject: ARM: OMAP1: Pass dma request lines in platform data to MMC driver Pass dma request lines in platform data to MMC driver. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 2192676..fa1fa4d 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -144,13 +145,14 @@ static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller, } } -#define OMAP_MMC_NR_RES 2 +#define OMAP_MMC_NR_RES 4 /* * Register MMC devices. */ static int __init omap_mmc_add(const char *name, int id, unsigned long base, unsigned long size, unsigned int irq, + unsigned rx_req, unsigned tx_req, struct omap_mmc_platform_data *data) { struct platform_device *pdev; @@ -167,6 +169,12 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base, res[0].flags = IORESOURCE_MEM; res[1].start = res[1].end = irq; res[1].flags = IORESOURCE_IRQ; + res[2].start = rx_req; + res[2].name = "rx"; + res[2].flags = IORESOURCE_DMA; + res[3].start = tx_req; + res[3].name = "tx"; + res[3].flags = IORESOURCE_DMA; ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); if (ret == 0) @@ -194,6 +202,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, for (i = 0; i < nr_controllers; i++) { unsigned long base, size; + unsigned rx_req, tx_req; unsigned int irq = 0; if (!mmc_data[i]) @@ -205,19 +214,24 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, case 0: base = OMAP1_MMC1_BASE; irq = INT_MMC; + rx_req = OMAP_DMA_MMC_RX; + tx_req = OMAP_DMA_MMC_TX; break; case 1: if (!cpu_is_omap16xx()) return; base = OMAP1_MMC2_BASE; irq = INT_1610_MMC2; + rx_req = OMAP_DMA_MMC2_RX; + tx_req = OMAP_DMA_MMC2_TX; break; default: continue; } size = OMAP1_MMC_SIZE; - omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]); + omap_mmc_add("mmci-omap", i, base, size, irq, + rx_req, tx_req, mmc_data[i]); }; } -- cgit v0.10.2