From 52a2b11cafb1b14bacfc65a20966da5ba3a863e1 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 1 Oct 2009 15:48:40 -0700 Subject: ACPI: clean up video.c boundary checks and types proc.c and video.c are a bit sloppy around types and style, confusing gcc for a new feature that'll be in 2.6.33 and will cause a warning on the current code. This patch changes if (foo + 1 > sizeof bar) into if (foo >= sizeof(bar)) which is more kernel-style. it also changes a variable in proc.c to unsigned; it gets assigned a value from an unsigned type, and is then only compared for > not for negative, so using unsigned is just outright the right type Signed-off-by: Arjan van de Ven Signed-off-by: Len Brown diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c index f8b6f55..d0d25e2 100644 --- a/drivers/acpi/proc.c +++ b/drivers/acpi/proc.c @@ -393,7 +393,7 @@ acpi_system_write_wakeup_device(struct file *file, struct list_head *node, *next; char strbuf[5]; char str[5] = ""; - int len = count; + unsigned int len = count; struct acpi_device *found_dev = NULL; if (len > 4) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 64e3c58..05dff63 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1223,7 +1223,7 @@ acpi_video_device_write_state(struct file *file, u32 state = 0; - if (!dev || count + 1 > sizeof str) + if (!dev || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) @@ -1280,7 +1280,7 @@ acpi_video_device_write_brightness(struct file *file, int i; - if (!dev || !dev->brightness || count + 1 > sizeof str) + if (!dev || !dev->brightness || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) @@ -1562,7 +1562,7 @@ acpi_video_bus_write_POST(struct file *file, unsigned long long opt, options; - if (!video || count + 1 > sizeof str) + if (!video || count >= sizeof(str)) return -EINVAL; status = acpi_video_bus_POST_options(video, &options); @@ -1602,7 +1602,7 @@ acpi_video_bus_write_DOS(struct file *file, unsigned long opt; - if (!video || count + 1 > sizeof str) + if (!video || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) -- cgit v0.10.2 From 58ce48a9de1dd47acb5dc00e2837214d2be1d92a Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Fri, 16 Oct 2009 22:22:46 +0200 Subject: Revert "eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit rt2860sta is fine with the patch as is, but iwl3945 isn't (eeepc_rfkill_set() needs to call eeepc_rfkill_hotplug(true) – which means that we're back to causing the rt2860sta panic This reverts commit b56ab33d68638e6aafdbfc694025e8354a628f49. Signed-off-by: Corentin Chary Signed-off-by: Darren Salt Signed-off-by: Len Brown diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index d379e74..789d6ae 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -150,8 +150,6 @@ struct eeepc_hotk { /* The actual device the driver binds to */ static struct eeepc_hotk *ehotk; -static void eeepc_rfkill_hotplug(bool real); - /* Platform device/driver */ static int eeepc_hotk_thaw(struct device *device); static int eeepc_hotk_restore(struct device *device); @@ -345,16 +343,7 @@ static bool eeepc_wlan_rfkill_blocked(void) static int eeepc_rfkill_set(void *data, bool blocked) { unsigned long asl = (unsigned long)data; - int ret; - - if (asl != CM_ASL_WLAN) - return set_acpi(asl, !blocked); - - /* hack to avoid panic with rt2860sta */ - if (blocked) - eeepc_rfkill_hotplug(false); - ret = set_acpi(asl, !blocked); - return ret; + return set_acpi(asl, !blocked); } static const struct rfkill_ops eeepc_rfkill_ops = { @@ -654,13 +643,13 @@ static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, return 0; } -static void eeepc_rfkill_hotplug(bool real) +static void eeepc_rfkill_hotplug(void) { struct pci_dev *dev; struct pci_bus *bus; - bool blocked = real ? eeepc_wlan_rfkill_blocked() : true; + bool blocked = eeepc_wlan_rfkill_blocked(); - if (real && ehotk->wlan_rfkill) + if (ehotk->wlan_rfkill) rfkill_set_sw_state(ehotk->wlan_rfkill, blocked); mutex_lock(&ehotk->hotplug_lock); @@ -703,7 +692,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) if (event != ACPI_NOTIFY_BUS_CHECK) return; - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); } static void eeepc_hotk_notify(struct acpi_device *device, u32 event) @@ -861,7 +850,7 @@ static int eeepc_hotk_restore(struct device *device) { /* Refresh both wlan rfkill state and pci hotplug */ if (ehotk->wlan_rfkill) - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->bluetooth_rfkill) rfkill_set_sw_state(ehotk->bluetooth_rfkill, @@ -1004,7 +993,7 @@ static void eeepc_rfkill_exit(void) * Refresh pci hotplug in case the rfkill state was changed after * eeepc_unregister_rfkill_notifier() */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->hotplug_slot) pci_hp_deregister(ehotk->hotplug_slot); @@ -1120,7 +1109,7 @@ static int eeepc_rfkill_init(struct device *dev) * Refresh pci hotplug in case the rfkill state was changed during * setup. */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); exit: if (result && result != -ENODEV) -- cgit v0.10.2 From 80f0c895b57f0d936b420de6afea5167a49f62fa Mon Sep 17 00:00:00 2001 From: Luca Niccoli Date: Fri, 16 Oct 2009 22:22:47 +0200 Subject: eeepc-laptop: don't enable camera at startup if it's already on. Switching the camera takes 500ms, checking if it's on is almost free... The BIOS remembers the setting through reboots, so there's good chance the camera is already enabled. Signed-off-by: Luca Niccoli Cc: Corentin Chary Cc: Alan Jenkins Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Corentin Chary Signed-off-by: Len Brown diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 789d6ae..4226e53 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -356,7 +356,8 @@ static void __devinit eeepc_enable_camera(void) * If the following call to set_acpi() fails, it's because there's no * camera so we can ignore the error. */ - set_acpi(CM_ASL_CAMERA, 1); + if (get_acpi(CM_ASL_CAMERA) == 0) + set_acpi(CM_ASL_CAMERA, 1); } /* -- cgit v0.10.2 From 22aecebfd9498c4779e5c5bed1d2d054bd99f7a4 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 21 Oct 2009 18:01:37 -0700 Subject: acpi-power-meter: Don't leak ACPI error codes to userspace If the ACPI methods return an error code, we must return -EINVAL to userspace to flag the error. Right now we pass the (positive) number right through, which causes echo to keep writing bogus values. Signed-off-by: Darrick J. Wong Acked-by: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index e6bfd77..2ef7030 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -294,7 +294,11 @@ static int set_acpi_trip(struct acpi_power_meter_resource *resource) return -EINVAL; } - return data; + /* _PTP returns 0 on success, nonzero otherwise */ + if (data) + return -EINVAL; + + return 0; } static ssize_t set_trip(struct device *dev, struct device_attribute *devattr, -- cgit v0.10.2 From 941b10fab2cbd90ac7ad6bc2338ffe30e1d3ce53 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Thu, 5 Nov 2009 16:51:40 -0500 Subject: ACPI: add __cpuinit to acpi_processor_add() Annote acpi_processor_add with cpuinit since it calls a cpuinit function acpi_processor_power_init and fixes a section mismatch warning. We were warned by the following warning: LD drivers/acpi/processor.o WARNING: drivers/acpi/processor.o(.text+0x1829): Section mismatch in reference from the function acpi_processor_add() to the function .cpuinit.text:acpi_processor_power_init() The function acpi_processor_add() references the function __cpuinit acpi_processor_power_init(). This is often because acpi_processor_add lacks a __cpuinit annotation or the annotation of acpi_processor_power_init is wrong. Signed-off-by: Rakib Mullick Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index c567b46..ec742a4 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -770,7 +770,7 @@ static struct notifier_block acpi_cpu_notifier = .notifier_call = acpi_cpu_soft_notify, }; -static int acpi_processor_add(struct acpi_device *device) +static int __cpuinit acpi_processor_add(struct acpi_device *device) { struct acpi_processor *pr = NULL; int result = 0; -- cgit v0.10.2 From d410ee5109a1633a686a5663c6743a92e1181f9b Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 22 Oct 2009 09:11:11 +0800 Subject: ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine." Ensure that memory mappings created for operation regions do not cross page boundaries. Crossing a page boundary while mapping regions can cause warnings if the pages have different attributes. Such regions are probably BIOS bugs, and this is the workaround. http://bugzilla.kernel.org/show_bug.cgi?id=14445 [Kernel summit hacking hour] Signed-off-by: Bob Moore Acked-by: Suresh Siddha Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index 8e679ef..a4471e3 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -103,9 +103,9 @@ #define ACPI_MAX_REFERENCE_COUNT 0x1000 -/* Size of cached memory mapping for system memory operation region */ +/* Default page size for use in mapping memory for operation regions */ -#define ACPI_SYSMEM_REGION_WINDOW_SIZE 4096 +#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */ /* owner_id tracking. 8 entries allows for 255 owner_ids */ diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c index 3a54b73..2bd83ac 100644 --- a/drivers/acpi/acpica/exregion.c +++ b/drivers/acpi/acpica/exregion.c @@ -77,7 +77,8 @@ acpi_ex_system_memory_space_handler(u32 function, void *logical_addr_ptr = NULL; struct acpi_mem_space_context *mem_info = region_context; u32 length; - acpi_size window_size; + acpi_size map_length; + acpi_size page_boundary_map_length; #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED u32 remainder; #endif @@ -144,25 +145,39 @@ acpi_ex_system_memory_space_handler(u32 function, } /* - * Don't attempt to map memory beyond the end of the region, and - * constrain the maximum mapping size to something reasonable. + * Attempt to map from the requested address to the end of the region. + * However, we will never map more than one page, nor will we cross + * a page boundary. */ - window_size = (acpi_size) + map_length = (acpi_size) ((mem_info->address + mem_info->length) - address); - if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) { - window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE; + /* + * If mapping the entire remaining portion of the region will cross + * a page boundary, just map up to the page boundary, do not cross. + * On some systems, crossing a page boundary while mapping regions + * can cause warnings if the pages have different attributes + * due to resource management + */ + page_boundary_map_length = + ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address; + + if (!page_boundary_map_length) { + page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE; + } + + if (map_length > page_boundary_map_length) { + map_length = page_boundary_map_length; } /* Create a new mapping starting at the address given */ - mem_info->mapped_logical_address = - acpi_os_map_memory((acpi_physical_address) address, window_size); + mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length); if (!mem_info->mapped_logical_address) { ACPI_ERROR((AE_INFO, "Could not map memory at %8.8X%8.8X, size %X", ACPI_FORMAT_NATIVE_UINT(address), - (u32) window_size)); + (u32) map_length)); mem_info->mapped_length = 0; return_ACPI_STATUS(AE_NO_MEMORY); } @@ -170,7 +185,7 @@ acpi_ex_system_memory_space_handler(u32 function, /* Save the physical address and mapping size */ mem_info->mapped_physical_address = address; - mem_info->mapped_length = window_size; + mem_info->mapped_length = map_length; } /* -- cgit v0.10.2 From 5cfa245b0b63c3d79568e78a1ee3d00654d5517d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:34:39 +0200 Subject: ACPI: Move dereference after NULL test If the NULL test on pr is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 4c6c14c..1c5d7a8 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -1133,15 +1133,15 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) int result = 0; struct acpi_processor_throttling *pthrottling; + if (!pr) + return -EINVAL; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n", pr->throttling.address, pr->throttling.duty_offset, pr->throttling.duty_width)); - if (!pr) - return -EINVAL; - /* * Evaluate _PTC, _TSS and _TPC * They must all be present or none of them can be used. -- cgit v0.10.2 From 625120a42bd4371da98808a4ca3e7589083a06d8 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 16 Oct 2009 12:46:02 +0300 Subject: acpi: thermal: Add EOL to the trip_point_N_type strings Make the trip_point_N_type sysfs files return a string ending in EOL for consistency with other sysfs files. Signed-off-by: Amit Kucheria Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 4e83c29..6f8d8f9 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -180,15 +180,15 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr, switch (type) { case THERMAL_TRIP_CRITICAL: - return sprintf(buf, "critical"); + return sprintf(buf, "critical\n"); case THERMAL_TRIP_HOT: - return sprintf(buf, "hot"); + return sprintf(buf, "hot\n"); case THERMAL_TRIP_PASSIVE: - return sprintf(buf, "passive"); + return sprintf(buf, "passive\n"); case THERMAL_TRIP_ACTIVE: - return sprintf(buf, "active"); + return sprintf(buf, "active\n"); default: - return sprintf(buf, "unknown"); + return sprintf(buf, "unknown\n"); } } -- cgit v0.10.2 From 38bb0849a6799e05bb474a88f198522ae4ecace2 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 26 Oct 2009 08:38:59 +0100 Subject: thermal: sysfs-api.txt - reformat for improved readability The document currently uses large indentations which make the text too wide for easy readability. Also improve general consistency. Signed-off-by: Frans Pop Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 70d68ce..895337f 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -1,5 +1,5 @@ Generic Thermal Sysfs driver How To -========================= +=================================== Written by Sujith Thomas , Zhang Rui @@ -10,20 +10,20 @@ Copyright (c) 2008 Intel Corporation 0. Introduction -The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors) -and thermal cooling devices (fan, processor...) to register with the thermal management -solution and to be a part of it. +The generic thermal sysfs provides a set of interfaces for thermal zone +devices (sensors) and thermal cooling devices (fan, processor...) to register +with the thermal management solution and to be a part of it. -This how-to focuses on enabling new thermal zone and cooling devices to participate -in thermal management. -This solution is platform independent and any type of thermal zone devices and -cooling devices should be able to make use of the infrastructure. +This how-to focuses on enabling new thermal zone and cooling devices to +participate in thermal management. +This solution is platform independent and any type of thermal zone devices +and cooling devices should be able to make use of the infrastructure. -The main task of the thermal sysfs driver is to expose thermal zone attributes as well -as cooling device attributes to the user space. -An intelligent thermal management application can make decisions based on inputs -from thermal zone attributes (the current temperature and trip point temperature) -and throttle appropriate devices. +The main task of the thermal sysfs driver is to expose thermal zone attributes +as well as cooling device attributes to the user space. +An intelligent thermal management application can make decisions based on +inputs from thermal zone attributes (the current temperature and trip point +temperature) and throttle appropriate devices. [0-*] denotes any positive number starting from 0 [1-*] denotes any positive number starting from 1 @@ -31,77 +31,77 @@ and throttle appropriate devices. 1. thermal sysfs driver interface functions 1.1 thermal zone device interface -1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips, - void *devdata, struct thermal_zone_device_ops *ops) - - This interface function adds a new thermal zone device (sensor) to - /sys/class/thermal folder as thermal_zone[0-*]. - It tries to bind all the thermal cooling devices registered at the same time. - - name: the thermal zone name. - trips: the total number of trip points this thermal zone supports. - devdata: device private data - ops: thermal zone device call-backs. - .bind: bind the thermal zone device with a thermal cooling device. - .unbind: unbind the thermal zone device with a thermal cooling device. - .get_temp: get the current temperature of the thermal zone. - .get_mode: get the current mode (user/kernel) of the thermal zone. - "kernel" means thermal management is done in kernel. - "user" will prevent kernel thermal driver actions upon trip points - so that user applications can take charge of thermal management. - .set_mode: set the mode (user/kernel) of the thermal zone. - .get_trip_type: get the type of certain trip point. - .get_trip_temp: get the temperature above which the certain trip point - will be fired. +1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, + int trips, void *devdata, struct thermal_zone_device_ops *ops) + + This interface function adds a new thermal zone device (sensor) to + /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the + thermal cooling devices registered at the same time. + + name: the thermal zone name. + trips: the total number of trip points this thermal zone supports. + devdata: device private data + ops: thermal zone device call-backs. + .bind: bind the thermal zone device with a thermal cooling device. + .unbind: unbind the thermal zone device with a thermal cooling device. + .get_temp: get the current temperature of the thermal zone. + .get_mode: get the current mode (user/kernel) of the thermal zone. + - "kernel" means thermal management is done in kernel. + - "user" will prevent kernel thermal driver actions upon trip points + so that user applications can take charge of thermal management. + .set_mode: set the mode (user/kernel) of the thermal zone. + .get_trip_type: get the type of certain trip point. + .get_trip_temp: get the temperature above which the certain trip point + will be fired. 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz) - This interface function removes the thermal zone device. - It deletes the corresponding entry form /sys/class/thermal folder and unbind all - the thermal cooling devices it uses. + This interface function removes the thermal zone device. + It deletes the corresponding entry form /sys/class/thermal folder and + unbind all the thermal cooling devices it uses. 1.2 thermal cooling device interface 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name, - void *devdata, struct thermal_cooling_device_ops *) - - This interface function adds a new thermal cooling device (fan/processor/...) to - /sys/class/thermal/ folder as cooling_device[0-*]. - It tries to bind itself to all the thermal zone devices register at the same time. - name: the cooling device name. - devdata: device private data. - ops: thermal cooling devices call-backs. - .get_max_state: get the Maximum throttle state of the cooling device. - .get_cur_state: get the Current throttle state of the cooling device. - .set_cur_state: set the Current throttle state of the cooling device. + void *devdata, struct thermal_cooling_device_ops *) + + This interface function adds a new thermal cooling device (fan/processor/...) + to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself + to all the thermal zone devices register at the same time. + name: the cooling device name. + devdata: device private data. + ops: thermal cooling devices call-backs. + .get_max_state: get the Maximum throttle state of the cooling device. + .get_cur_state: get the Current throttle state of the cooling device. + .set_cur_state: set the Current throttle state of the cooling device. 1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) - This interface function remove the thermal cooling device. - It deletes the corresponding entry form /sys/class/thermal folder and unbind - itself from all the thermal zone devices using it. + This interface function remove the thermal cooling device. + It deletes the corresponding entry form /sys/class/thermal folder and + unbind itself from all the thermal zone devices using it. 1.3 interface for binding a thermal zone device with a thermal cooling device 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev); + int trip, struct thermal_cooling_device *cdev); - This interface function bind a thermal cooling device to the certain trip point - of a thermal zone device. - This function is usually called in the thermal zone device .bind callback. - tz: the thermal zone device - cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + This interface function bind a thermal cooling device to the certain trip + point of a thermal zone device. + This function is usually called in the thermal zone device .bind callback. + tz: the thermal zone device + cdev: thermal cooling device + trip: indicates which trip point the cooling devices is associated with + in this thermal zone. 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev); + int trip, struct thermal_cooling_device *cdev); - This interface function unbind a thermal cooling device from the certain trip point - of a thermal zone device. - This function is usually called in the thermal zone device .unbind callback. - tz: the thermal zone device - cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + This interface function unbind a thermal cooling device from the certain + trip point of a thermal zone device. This function is usually called in + the thermal zone device .unbind callback. + tz: the thermal zone device + cdev: thermal cooling device + trip: indicates which trip point the cooling devices is associated with + in this thermal zone. 2. sysfs attributes structure @@ -114,153 +114,157 @@ if hwmon is compiled in or built as a module. Thermal zone device sys I/F, created once it's registered: /sys/class/thermal/thermal_zone[0-*]: - |-----type: Type of the thermal zone - |-----temp: Current temperature - |-----mode: Working mode of the thermal zone - |-----trip_point_[0-*]_temp: Trip point temperature - |-----trip_point_[0-*]_type: Trip point type + |---type: Type of the thermal zone + |---temp: Current temperature + |---mode: Working mode of the thermal zone + |---trip_point_[0-*]_temp: Trip point temperature + |---trip_point_[0-*]_type: Trip point type Thermal cooling device sys I/F, created once it's registered: /sys/class/thermal/cooling_device[0-*]: - |-----type : Type of the cooling device(processor/fan/...) - |-----max_state: Maximum cooling state of the cooling device - |-----cur_state: Current cooling state of the cooling device + |---type: Type of the cooling device(processor/fan/...) + |---max_state: Maximum cooling state of the cooling device + |---cur_state: Current cooling state of the cooling device -These two dynamic attributes are created/removed in pairs. -They represent the relationship between a thermal zone and its associated cooling device. -They are created/removed for each -thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution. +Then next two dynamic attributes are created/removed in pairs. They represent +the relationship between a thermal zone and its associated cooling device. +They are created/removed for each successful execution of +thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device. -/sys/class/thermal/thermal_zone[0-*] - |-----cdev[0-*]: The [0-*]th cooling device in the current thermal zone - |-----cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with +/sys/class/thermal/thermal_zone[0-*]: + |---cdev[0-*]: [0-*]th cooling device in current thermal zone + |---cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with Besides the thermal zone device sysfs I/F and cooling device sysfs I/F, -the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of -thermal zone device. E.g. the generic thermal driver registers one hwmon class device -and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones. +the generic thermal driver also creates a hwmon sysfs I/F for each _type_ +of thermal zone device. E.g. the generic thermal driver registers one hwmon +class device and build the associated hwmon sysfs I/F for all the registered +ACPI thermal zones. + /sys/class/hwmon/hwmon[0-*]: - |-----name: The type of the thermal zone devices. - |-----temp[1-*]_input: The current temperature of thermal zone [1-*]. - |-----temp[1-*]_critical: The critical trip point of thermal zone [1-*]. + |---name: The type of the thermal zone devices + |---temp[1-*]_input: The current temperature of thermal zone [1-*] + |---temp[1-*]_critical: The critical trip point of thermal zone [1-*] + Please read Documentation/hwmon/sysfs-interface for additional information. *************************** * Thermal zone attributes * *************************** -type Strings which represent the thermal zone type. - This is given by thermal zone driver as part of registration. - Eg: "acpitz" indicates it's an ACPI thermal device. - In order to keep it consistent with hwmon sys attribute, - this should be a short, lowercase string, - not containing spaces nor dashes. - RO - Required - -temp Current temperature as reported by thermal zone (sensor) - Unit: millidegree Celsius - RO - Required - -mode One of the predefined values in [kernel, user] - This file gives information about the algorithm - that is currently managing the thermal zone. - It can be either default kernel based algorithm - or user space application. - RW - Optional - kernel = Thermal management in kernel thermal zone driver. - user = Preventing kernel thermal zone driver actions upon - trip points so that user application can take full - charge of the thermal management. - -trip_point_[0-*]_temp The temperature above which trip point will be fired - Unit: millidegree Celsius - RO - Optional - -trip_point_[0-*]_type Strings which indicate the type of the trip point - E.g. it can be one of critical, hot, passive, - active[0-*] for ACPI thermal zone. - RO - Optional - -cdev[0-*] Sysfs link to the thermal cooling device node where the sys I/F - for cooling device throttling control represents. - RO - Optional - -cdev[0-*]_trip_point The trip point with which cdev[0-*] is associated in this thermal zone - -1 means the cooling device is not associated with any trip point. - RO - Optional - -****************************** -* Cooling device attributes * -****************************** - -type String which represents the type of device - eg: For generic ACPI: this should be "Fan", - "Processor" or "LCD" - eg. For memory controller device on intel_menlow platform: - this should be "Memory controller" - RO - Required - -max_state The maximum permissible cooling state of this cooling device. - RO - Required - -cur_state The current cooling state of this cooling device. - the value can any integer numbers between 0 and max_state, - cur_state == 0 means no cooling - cur_state == max_state means the maximum cooling. - RW - Required +type + Strings which represent the thermal zone type. + This is given by thermal zone driver as part of registration. + E.g: "acpitz" indicates it's an ACPI thermal device. + In order to keep it consistent with hwmon sys attribute; this should + be a short, lowercase string, not containing spaces nor dashes. + RO, Required + +temp + Current temperature as reported by thermal zone (sensor). + Unit: millidegree Celsius + RO, Required + +mode + One of the predefined values in [kernel, user]. + This file gives information about the algorithm that is currently + managing the thermal zone. It can be either default kernel based + algorithm or user space application. + kernel = Thermal management in kernel thermal zone driver. + user = Preventing kernel thermal zone driver actions upon + trip points so that user application can take full + charge of the thermal management. + RW, Optional + +trip_point_[0-*]_temp + The temperature above which trip point will be fired. + Unit: millidegree Celsius + RO, Optional + +trip_point_[0-*]_type + Strings which indicate the type of the trip point. + E.g. it can be one of critical, hot, passive, active[0-*] for ACPI + thermal zone. + RO, Optional + +cdev[0-*] + Sysfs link to the thermal cooling device node where the sys I/F + for cooling device throttling control represents. + RO, Optional + +cdev[0-*]_trip_point + The trip point with which cdev[0-*] is associated in this thermal + zone; -1 means the cooling device is not associated with any trip + point. + RO, Optional + +***************************** +* Cooling device attributes * +***************************** + +type + String which represents the type of device, e.g: + - for generic ACPI: should be "Fan", "Processor" or "LCD" + - for memory controller device on intel_menlow platform: + should be "Memory controller". + RO, Required + +max_state + The maximum permissible cooling state of this cooling device. + RO, Required + +cur_state + The current cooling state of this cooling device. + The value can any integer numbers between 0 and max_state: + - cur_state == 0 means no cooling + - cur_state == max_state means the maximum cooling. + RW, Required 3. A simple implementation -ACPI thermal zone may support multiple trip points like critical/hot/passive/active. -If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time, -it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all. -It has one processor and one fan, which are both registered as thermal_cooling_device. -If the processor is listed in _PSL method, and the fan is listed in _AL0 method, -the sys I/F structure will be built like this: +ACPI thermal zone may support multiple trip points like critical, hot, +passive, active. If an ACPI thermal zone supports critical, passive, +active[0] and active[1] at the same time, it may register itself as a +thermal_zone_device (thermal_zone1) with 4 trip points in all. +It has one processor and one fan, which are both registered as +thermal_cooling_device. + +If the processor is listed in _PSL method, and the fan is listed in _AL0 +method, the sys I/F structure will be built like this: /sys/class/thermal: |thermal_zone1: - |-----type: acpitz - |-----temp: 37000 - |-----mode: kernel - |-----trip_point_0_temp: 100000 - |-----trip_point_0_type: critical - |-----trip_point_1_temp: 80000 - |-----trip_point_1_type: passive - |-----trip_point_2_temp: 70000 - |-----trip_point_2_type: active0 - |-----trip_point_3_temp: 60000 - |-----trip_point_3_type: active1 - |-----cdev0: --->/sys/class/thermal/cooling_device0 - |-----cdev0_trip_point: 1 /* cdev0 can be used for passive */ - |-----cdev1: --->/sys/class/thermal/cooling_device3 - |-----cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/ + |---type: acpitz + |---temp: 37000 + |---mode: kernel + |---trip_point_0_temp: 100000 + |---trip_point_0_type: critical + |---trip_point_1_temp: 80000 + |---trip_point_1_type: passive + |---trip_point_2_temp: 70000 + |---trip_point_2_type: active0 + |---trip_point_3_temp: 60000 + |---trip_point_3_type: active1 + |---cdev0: --->/sys/class/thermal/cooling_device0 + |---cdev0_trip_point: 1 /* cdev0 can be used for passive */ + |---cdev1: --->/sys/class/thermal/cooling_device3 + |---cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/ |cooling_device0: - |-----type: Processor - |-----max_state: 8 - |-----cur_state: 0 + |---type: Processor + |---max_state: 8 + |---cur_state: 0 |cooling_device3: - |-----type: Fan - |-----max_state: 2 - |-----cur_state: 0 + |---type: Fan + |---max_state: 2 + |---cur_state: 0 /sys/class/hwmon: |hwmon0: - |-----name: acpitz - |-----temp1_input: 37000 - |-----temp1_crit: 100000 + |---name: acpitz + |---temp1_input: 37000 + |---temp1_crit: 100000 -- cgit v0.10.2 From 29226ed3c3b5cd0b2b0b1fb40ffeac3f796b80e9 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 26 Oct 2009 08:39:00 +0100 Subject: thermal: sysfs-api.txt - document passive attribute for thermal zones Signed-off-by: Frans Pop Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 895337f..a87dc27 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -199,6 +199,15 @@ cdev[0-*]_trip_point point. RO, Optional +passive + Attribute is only present for zones in which the passive cooling + policy is not supported by native thermal driver. Default is zero + and can be set to a temperature (in millidegrees) to enable a + passive trip point for the zone. Activation is done by polling with + an interval of 1 second. + Unit: millidegrees Celsius + RW, Optional + ***************************** * Cooling device attributes * ***************************** -- cgit v0.10.2