From 33766368f6532313571534f9112b1796d6651bbe Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 30 Sep 2012 19:47:40 +0300 Subject: mac80211: Fix FC masking in BIP AAD generation The bits used in the mask were off-by-one and ended up masking PwrMgt, MoreData, Protected fields instead of Retry, PwrMgt, MoreData. Fix this and to mask the correct fields. While doing so, convert the code to mask the full FC using IEEE80211_FCTL_* defines similarly to how CCMP AAD is built. Since BIP is used only with broadcast/multicast management frames, the Retry field is always 0 in these frames. The Protected field is also zero to maintain backwards compatibility. As such, the incorrect mask here does not really cause any problems for valid frames. In theory, an invalid BIP frame with Retry or Protected field set to 1 could be rejected because of BIP validation. However, no such frame should show up with standard compliant implementations, so this does not cause problems in normal BIP use. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index bdb53ab..e58bf3f 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -545,14 +545,19 @@ ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx) static void bip_aad(struct sk_buff *skb, u8 *aad) { + __le16 mask_fc; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + /* BIP AAD: FC(masked) || A1 || A2 || A3 */ /* FC type/subtype */ - aad[0] = skb->data[0]; /* Mask FC Retry, PwrMgt, MoreData flags to zero */ - aad[1] = skb->data[1] & ~(BIT(4) | BIT(5) | BIT(6)); + mask_fc = hdr->frame_control; + mask_fc &= ~cpu_to_le16(IEEE80211_FCTL_RETRY | IEEE80211_FCTL_PM | + IEEE80211_FCTL_MOREDATA); + put_unaligned(mask_fc, (__le16 *) &aad[0]); /* A1 || A2 || A3 */ - memcpy(aad + 2, skb->data + 4, 3 * ETH_ALEN); + memcpy(aad + 2, &hdr->addr1, 3 * ETH_ALEN); } -- cgit v0.10.2 From b61a602ee6730150f4d0df730d9312ac4d820ceb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 9 Oct 2012 13:04:34 +0900 Subject: ipvs: initialize returned data in do_ip_vs_get_ctl As reported by a gcc warning, the do_ip_vs_get_ctl does not initalize all the members of the ip_vs_timeout_user structure it returns if at least one of the TCP or UDP protocols is disabled for ipvs. This makes sure that the data is always initialized, before it is returned as a response to IPVS_CMD_GET_CONFIG or printed as a debug message in IPVS_CMD_SET_CONFIG. Without this patch, building ARM ixp4xx_defconfig results in: net/netfilter/ipvs/ip_vs_ctl.c: In function 'ip_vs_genl_set_cmd': net/netfilter/ipvs/ip_vs_ctl.c:2238:47: warning: 't.udp_timeout' may be used uninitialized in this function [-Wuninitialized] net/netfilter/ipvs/ip_vs_ctl.c:3322:28: note: 't.udp_timeout' was declared here net/netfilter/ipvs/ip_vs_ctl.c:2238:47: warning: 't.tcp_fin_timeout' may be used uninitialized in this function [-Wuninitialized] net/netfilter/ipvs/ip_vs_ctl.c:3322:28: note: 't.tcp_fin_timeout' was declared here net/netfilter/ipvs/ip_vs_ctl.c:2238:47: warning: 't.tcp_timeout' may be used uninitialized in this function [-Wuninitialized] net/netfilter/ipvs/ip_vs_ctl.c:3322:28: note: 't.tcp_timeout' was declared here Signed-off-by: Arnd Bergmann Acked-by: Julian Anastasov Signed-off-by: Simon Horman diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 7e7198b..c4ee437 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2589,6 +2589,8 @@ __ip_vs_get_timeouts(struct net *net, struct ip_vs_timeout_user *u) struct ip_vs_proto_data *pd; #endif + memset(u, 0, sizeof (*u)); + #ifdef CONFIG_IP_VS_PROTO_TCP pd = ip_vs_proto_data_get(net, IPPROTO_TCP); u->tcp_timeout = pd->timeout_table[IP_VS_TCP_S_ESTABLISHED] / HZ; @@ -2766,7 +2768,6 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len) { struct ip_vs_timeout_user t; - memset(&t, 0, sizeof(t)); __ip_vs_get_timeouts(net, &t); if (copy_to_user(user, &t, sizeof(t)) != 0) ret = -EFAULT; -- cgit v0.10.2 From 065a13e2cc665f6547dc7e8a9d6b6565badf940a Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Thu, 11 Oct 2012 16:26:06 +0200 Subject: Bluetooth: SMP: Fix setting unknown auth_req bits When sending a pairing request or response we should not just blindly copy the value that the remote device sent. Instead we should at least make sure to mask out any unknown bits. This is particularly critical from the upcoming LE Secure Connections feature perspective as incorrectly indicating support for it (by copying the remote value) would cause a failure to pair with devices that support it. Signed-off-by: Johan Hedberg Cc: stable@kernel.org Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 8c225ef..2ac8d50 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -32,6 +32,8 @@ #define SMP_TIMEOUT msecs_to_jiffies(30000) +#define AUTH_REQ_MASK 0x07 + static inline void swap128(u8 src[16], u8 dst[16]) { int i; @@ -230,7 +232,7 @@ static void build_pairing_cmd(struct l2cap_conn *conn, req->max_key_size = SMP_MAX_ENC_KEY_SIZE; req->init_key_dist = 0; req->resp_key_dist = dist_keys; - req->auth_req = authreq; + req->auth_req = (authreq & AUTH_REQ_MASK); return; } @@ -239,7 +241,7 @@ static void build_pairing_cmd(struct l2cap_conn *conn, rsp->max_key_size = SMP_MAX_ENC_KEY_SIZE; rsp->init_key_dist = 0; rsp->resp_key_dist = req->resp_key_dist & dist_keys; - rsp->auth_req = authreq; + rsp->auth_req = (authreq & AUTH_REQ_MASK); } static u8 check_enc_key_size(struct l2cap_conn *conn, __u8 max_key_size) -- cgit v0.10.2 From 0153d5a810ab335aae86acfe69722a7efc1db536 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 11 Oct 2012 10:49:12 +0200 Subject: netfilter: xt_CT: fix timeout setting with IPv6 This patch fixes ip6tables and the CT target if it is used to set some custom conntrack timeout policy for IPv6. Use xt_ct_find_proto which already handles the ip6tables case for us. Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_CT.c b/net/netfilter/xt_CT.c index 16c7125..ae7f5da 100644 --- a/net/netfilter/xt_CT.c +++ b/net/netfilter/xt_CT.c @@ -180,9 +180,9 @@ xt_ct_set_timeout(struct nf_conn *ct, const struct xt_tgchk_param *par, typeof(nf_ct_timeout_find_get_hook) timeout_find_get; struct ctnl_timeout *timeout; struct nf_conn_timeout *timeout_ext; - const struct ipt_entry *e = par->entryinfo; struct nf_conntrack_l4proto *l4proto; int ret = 0; + u8 proto; rcu_read_lock(); timeout_find_get = rcu_dereference(nf_ct_timeout_find_get_hook); @@ -192,9 +192,11 @@ xt_ct_set_timeout(struct nf_conn *ct, const struct xt_tgchk_param *par, goto out; } - if (e->ip.invflags & IPT_INV_PROTO) { + proto = xt_ct_find_proto(par); + if (!proto) { ret = -EINVAL; - pr_info("You cannot use inversion on L4 protocol\n"); + pr_info("You must specify a L4 protocol, and not use " + "inversions on it.\n"); goto out; } @@ -214,7 +216,7 @@ xt_ct_set_timeout(struct nf_conn *ct, const struct xt_tgchk_param *par, /* Make sure the timeout policy matches any existing protocol tracker, * otherwise default to generic. */ - l4proto = __nf_ct_l4proto_find(par->family, e->ip.proto); + l4proto = __nf_ct_l4proto_find(par->family, proto); if (timeout->l4proto->l4proto != l4proto->l4proto) { ret = -EINVAL; pr_info("Timeout policy `%s' can only be used by L4 protocol " -- cgit v0.10.2 From 939ccba437da1726a5c8a5b702a47d473da927ae Mon Sep 17 00:00:00 2001 From: Elison Niven Date: Mon, 15 Oct 2012 00:44:48 +0000 Subject: netfilter: xt_nat: fix incorrect hooks for SNAT and DNAT targets In (c7232c9 netfilter: add protocol independent NAT core), the hooks were accidentally modified: SNAT hooks are POST_ROUTING and LOCAL_IN (before it was LOCAL_OUT). DNAT hooks are PRE_ROUTING and LOCAL_OUT (before it was LOCAL_IN). Signed-off-by: Elison Niven Signed-off-by: Sanket Shah Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_nat.c b/net/netfilter/xt_nat.c index 81aafa8..bea7464 100644 --- a/net/netfilter/xt_nat.c +++ b/net/netfilter/xt_nat.c @@ -111,7 +111,7 @@ static struct xt_target xt_nat_target_reg[] __read_mostly = { .family = NFPROTO_IPV4, .table = "nat", .hooks = (1 << NF_INET_POST_ROUTING) | - (1 << NF_INET_LOCAL_OUT), + (1 << NF_INET_LOCAL_IN), .me = THIS_MODULE, }, { @@ -123,7 +123,7 @@ static struct xt_target xt_nat_target_reg[] __read_mostly = { .family = NFPROTO_IPV4, .table = "nat", .hooks = (1 << NF_INET_PRE_ROUTING) | - (1 << NF_INET_LOCAL_IN), + (1 << NF_INET_LOCAL_OUT), .me = THIS_MODULE, }, { @@ -133,7 +133,7 @@ static struct xt_target xt_nat_target_reg[] __read_mostly = { .targetsize = sizeof(struct nf_nat_range), .table = "nat", .hooks = (1 << NF_INET_POST_ROUTING) | - (1 << NF_INET_LOCAL_OUT), + (1 << NF_INET_LOCAL_IN), .me = THIS_MODULE, }, { @@ -143,7 +143,7 @@ static struct xt_target xt_nat_target_reg[] __read_mostly = { .targetsize = sizeof(struct nf_nat_range), .table = "nat", .hooks = (1 << NF_INET_PRE_ROUTING) | - (1 << NF_INET_LOCAL_IN), + (1 << NF_INET_LOCAL_OUT), .me = THIS_MODULE, }, }; -- cgit v0.10.2 From 6863255bd0e48bc41ae5a066d5c771801e92735a Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 15 Oct 2012 14:52:41 +0200 Subject: cfg80211/mac80211: avoid state mishmash on deauth Avoid situation when we are on associate state in mac80211 and on disassociate state in cfg80211. This can results on crash during modules unload (like showed on this thread: http://marc.info/?t=134373976300001&r=1&w=2) and possibly other problems. Reported-by: Pedro Francisco Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1b49890..f8cd4cf 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1218,6 +1218,7 @@ struct cfg80211_deauth_request { const u8 *ie; size_t ie_len; u16 reason_code; + bool local_state_change; }; /** diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e714ed8..e510a33 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3549,6 +3549,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; + bool tx = !req->local_state_change; mutex_lock(&ifmgd->mtx); @@ -3565,12 +3566,12 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, if (ifmgd->associated && ether_addr_equal(ifmgd->associated->bssid, req->bssid)) { ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, - req->reason_code, true, frame_buf); + req->reason_code, tx, frame_buf); } else { drv_mgd_prepare_tx(sdata->local, sdata); ieee80211_send_deauth_disassoc(sdata, req->bssid, IEEE80211_STYPE_DEAUTH, - req->reason_code, true, + req->reason_code, tx, frame_buf); } diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 8016fee..904a7f3 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -457,20 +457,14 @@ int __cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev, .reason_code = reason, .ie = ie, .ie_len = ie_len, + .local_state_change = local_state_change, }; ASSERT_WDEV_LOCK(wdev); - if (local_state_change) { - if (wdev->current_bss && - ether_addr_equal(wdev->current_bss->pub.bssid, bssid)) { - cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); - wdev->current_bss = NULL; - } - + if (local_state_change && (!wdev->current_bss || + !ether_addr_equal(wdev->current_bss->pub.bssid, bssid))) return 0; - } return rdev->ops->deauth(&rdev->wiphy, dev, &req); } -- cgit v0.10.2 From 4045f72bcf3c293c7c5932ef001742d8bb5ded76 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 2 Oct 2012 21:34:23 +0200 Subject: mac80211: check if key has TKIP type before updating IV This patch fix corruption which can manifest itself by following crash when switching on rfkill switch with rt2x00 driver: https://bugzilla.redhat.com/attachment.cgi?id=615362 Pointer key->u.ccmp.tfm of group key get corrupted in: ieee80211_rx_h_michael_mic_verify(): /* update IV in key information to be able to detect replays */ rx->key->u.tkip.rx[rx->security_idx].iv32 = rx->tkip_iv32; rx->key->u.tkip.rx[rx->security_idx].iv16 = rx->tkip_iv16; because rt2x00 always set RX_FLAG_MMIC_STRIPPED, even if key is not TKIP. We already check type of the key in different path in ieee80211_rx_h_michael_mic_verify() function, so adding additional check here is reasonable. Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index bdb53ab..e72562a 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -106,7 +106,8 @@ ieee80211_rx_h_michael_mic_verify(struct ieee80211_rx_data *rx) if (status->flag & RX_FLAG_MMIC_ERROR) goto mic_fail; - if (!(status->flag & RX_FLAG_IV_STRIPPED) && rx->key) + if (!(status->flag & RX_FLAG_IV_STRIPPED) && rx->key && + rx->key->conf.cipher == WLAN_CIPHER_SUITE_TKIP) goto update_iv; return RX_CONTINUE; -- cgit v0.10.2 From e270b302e4771cde91e713ae17da31c1afc9a135 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 10 Oct 2012 11:13:06 -0700 Subject: brcmfmac: handle all exceptions as an error. in brcmf_usb_probe_cb only return code ENOLINK was seen as an error. This is wrong, all error codes should be returned to usb subsystem. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index a2b4b1e..7a6dfdc 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1339,7 +1339,7 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo, } ret = brcmf_bus_start(dev); - if (ret == -ENOLINK) { + if (ret) { brcmf_dbg(ERROR, "dongle is not responding\n"); brcmf_detach(dev); goto fail; -- cgit v0.10.2 From a180b83bb1f036c587bdb93ac6171b94ff49133c Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Wed, 10 Oct 2012 11:13:09 -0700 Subject: brcmfmac: use control channel in roamed status reporting Channel reported in scan results passed to cfg80211 is control channel. But chanspec is reported while notifying cfg80211 about roamed update. Cfg80211 complains because it could not find the bss in the list. Report control channel while calling cfg80211_roamed. Signed-off-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index c1abaa6..48f08ae 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4606,12 +4606,13 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg, struct brcmf_cfg80211_profile *profile = cfg->profile; struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg); struct wiphy *wiphy = cfg_to_wiphy(cfg); - struct brcmf_channel_info_le channel_le; - struct ieee80211_channel *notify_channel; + struct ieee80211_channel *notify_channel = NULL; struct ieee80211_supported_band *band; + struct brcmf_bss_info_le *bi; u32 freq; s32 err = 0; u32 target_channel; + u8 *buf; WL_TRACE("Enter\n"); @@ -4619,11 +4620,22 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg, memcpy(profile->bssid, e->addr, ETH_ALEN); brcmf_update_bss_info(cfg); - brcmf_exec_dcmd(ndev, BRCMF_C_GET_CHANNEL, &channel_le, - sizeof(channel_le)); + buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); + if (buf == NULL) { + err = -ENOMEM; + goto done; + } + + /* data sent to dongle has to be little endian */ + *(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX); + err = brcmf_exec_dcmd(ndev, BRCMF_C_GET_BSS_INFO, buf, WL_BSS_INFO_MAX); + + if (err) + goto done; - target_channel = le32_to_cpu(channel_le.target_channel); - WL_CONN("Roamed to channel %d\n", target_channel); + bi = (struct brcmf_bss_info_le *)(buf + 4); + target_channel = bi->ctl_ch ? bi->ctl_ch : + CHSPEC_CHANNEL(le16_to_cpu(bi->chanspec)); if (target_channel <= CH_MAX_2G_CHANNEL) band = wiphy->bands[IEEE80211_BAND_2GHZ]; @@ -4633,6 +4645,8 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg, freq = ieee80211_channel_to_frequency(target_channel, band->band); notify_channel = ieee80211_get_channel(wiphy, freq); +done: + kfree(buf); cfg80211_roamed(ndev, notify_channel, (u8 *)profile->bssid, conn_info->req_ie, conn_info->req_ie_len, conn_info->resp_ie, conn_info->resp_ie_len, GFP_KERNEL); -- cgit v0.10.2 From 5dd161ff7b46029c9da4f4ef8b214b8ba4316445 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Wed, 10 Oct 2012 11:13:10 -0700 Subject: brcmfmac: set dongle mode accordingly when interface up The mode of WiFi dongle should be initialized in brcmf_cfg80211_up which get called when network interface is brought up. Otherwise brcmf_cfg80211_get_station would return error. Signed-off-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 48f08ae..2c66bae 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -5200,41 +5200,6 @@ brcmf_cfg80211_event(struct net_device *ndev, schedule_work(&cfg->event_work); } -static s32 brcmf_dongle_mode(struct net_device *ndev, s32 iftype) -{ - s32 infra = 0; - s32 err = 0; - - switch (iftype) { - case NL80211_IFTYPE_MONITOR: - case NL80211_IFTYPE_WDS: - WL_ERR("type (%d) : currently we do not support this mode\n", - iftype); - err = -EINVAL; - return err; - case NL80211_IFTYPE_ADHOC: - infra = 0; - break; - case NL80211_IFTYPE_STATION: - infra = 1; - break; - case NL80211_IFTYPE_AP: - infra = 1; - break; - default: - err = -EINVAL; - WL_ERR("invalid type (%d)\n", iftype); - return err; - } - err = brcmf_exec_dcmd_u32(ndev, BRCMF_C_SET_INFRA, &infra); - if (err) { - WL_ERR("WLC_SET_INFRA error (%d)\n", err); - return err; - } - - return 0; -} - static s32 brcmf_dongle_eventmsg(struct net_device *ndev) { /* Room for "event_msgs" + '\0' + bitvec */ @@ -5453,7 +5418,8 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) WL_BEACON_TIMEOUT); if (err) goto default_conf_out; - err = brcmf_dongle_mode(ndev, wdev->iftype); + err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype, + NULL, NULL); if (err && err != -EINPROGRESS) goto default_conf_out; err = brcmf_dongle_probecap(cfg); -- cgit v0.10.2 From 3e4f319dacc60c1b4537b85329d393ad18bf7501 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 10 Oct 2012 11:13:12 -0700 Subject: brcmfmac: fix end of loop check (signedness bug) The problem here is that we loop until "remained_buf_len" is less than zero, but since it is unsigned, it never is. "remained_buf_len" has to be large enough to hold the value from "mgmt_ie_buf_len". That variable is type u32, but it only holds small values so I have changed to both variables to int. Also I removed the bogus initialization from "mgmt_ie_buf_len" so that GCC can detect if it is used unitialized. I moved the declaration of "remained_buf_len" closer to where it is used so it's easier to read. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Dan Carpenter Signed-off-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 2c66bae..411dfe7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3972,7 +3972,7 @@ brcmf_set_management_ie(struct brcmf_cfg80211_info *cfg, u8 *iovar_ie_buf; u8 *curr_ie_buf; u8 *mgmt_ie_buf = NULL; - u32 mgmt_ie_buf_len = 0; + int mgmt_ie_buf_len; u32 *mgmt_ie_len = 0; u32 del_add_ie_buf_len = 0; u32 total_ie_buf_len = 0; @@ -3982,7 +3982,7 @@ brcmf_set_management_ie(struct brcmf_cfg80211_info *cfg, struct parsed_vndr_ie_info *vndrie_info; s32 i; u8 *ptr; - u32 remained_buf_len; + int remained_buf_len; WL_TRACE("bssidx %d, pktflag : 0x%02X\n", bssidx, pktflag); iovar_ie_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL); -- cgit v0.10.2 From d4fa14cd62bd078c8e3ef39283b9f237e5b2ff0f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 10 Oct 2012 22:40:23 +0200 Subject: mac80211: use ieee80211_free_txskb in a few more places Free tx status skbs when draining power save buffers, pending frames, or when tearing down a vif. Fixes remaining conditions that can lead to hostapd/wpa_supplicant hangs when running out of socket write memory. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 6f8a73c..7de7717 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -853,7 +853,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); if (info->control.vif == &sdata->vif) { __skb_unlink(skb, &local->pending[i]); - dev_kfree_skb_irq(skb); + ieee80211_free_txskb(&local->hw, skb); } } } diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 797dd36..0a4e4c0 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -650,7 +650,7 @@ static bool sta_info_cleanup_expire_buffered_ac(struct ieee80211_local *local, */ if (!skb) break; - dev_kfree_skb(skb); + ieee80211_free_txskb(&local->hw, skb); } /* @@ -679,7 +679,7 @@ static bool sta_info_cleanup_expire_buffered_ac(struct ieee80211_local *local, local->total_ps_buffered--; ps_dbg(sta->sdata, "Buffered frame expired (STA %pM)\n", sta->sta.addr); - dev_kfree_skb(skb); + ieee80211_free_txskb(&local->hw, skb); } /* diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 22ca350..94e5868 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -406,7 +406,7 @@ void ieee80211_add_pending_skb(struct ieee80211_local *local, int queue = info->hw_queue; if (WARN_ON(!info->control.vif)) { - kfree_skb(skb); + ieee80211_free_txskb(&local->hw, skb); return; } @@ -431,7 +431,7 @@ void ieee80211_add_pending_skbs_fn(struct ieee80211_local *local, struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); if (WARN_ON(!info->control.vif)) { - kfree_skb(skb); + ieee80211_free_txskb(&local->hw, skb); continue; } -- cgit v0.10.2 From 1fffa905adffbf0d3767fc978ef09afb830275eb Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Thu, 11 Oct 2012 14:05:15 +0200 Subject: bcma: fix unregistration of cores When cores are unregistered, entries need to be removed from cores list in a safe manner. Reported-by: Stanislaw Gruszka Reviewed-by: Arend Van Spriel Signed-off-by: Piotr Haber Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index 432aeee..d865470 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -158,9 +158,10 @@ static int bcma_register_cores(struct bcma_bus *bus) static void bcma_unregister_cores(struct bcma_bus *bus) { - struct bcma_device *core; + struct bcma_device *core, *tmp; - list_for_each_entry(core, &bus->cores, list) { + list_for_each_entry_safe(core, tmp, &bus->cores, list) { + list_del(&core->list); if (core->dev_registered) device_unregister(&core->dev); } -- cgit v0.10.2 From bf11315eeda510ea4fc1a2bf972d8155d31d89b4 Mon Sep 17 00:00:00 2001 From: Stanislav Yakovlev Date: Mon, 15 Oct 2012 14:14:32 +0000 Subject: net/wireless: ipw2200: Fix panic occurring in ipw_handle_promiscuous_tx() The driver does not count space of radiotap fields when allocating skb for radiotap packet. This leads to kernel panic with the following call trace: ... [67607.676067] [] error_code+0x67/0x6c [67607.676067] [] ? skb_put+0x91/0xa0 [67607.676067] [] ? ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [] ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [] ipw_net_hard_start_xmit+0x8b/0x90 [ipw2200] [67607.676067] [] libipw_xmit+0x55a/0x980 [libipw] [67607.676067] [] dev_hard_start_xmit+0x218/0x4d0 ... This bug was found by VittGam. https://bugzilla.kernel.org/show_bug.cgi?id=43255 Cc: stable@kernel.org Signed-off-by: Stanislav Yakovlev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 935120f..768bf61 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -10472,7 +10472,7 @@ static void ipw_handle_promiscuous_tx(struct ipw_priv *priv, } else len = src->len; - dst = alloc_skb(len + sizeof(*rt_hdr), GFP_ATOMIC); + dst = alloc_skb(len + sizeof(*rt_hdr) + sizeof(u16)*2, GFP_ATOMIC); if (!dst) continue; -- cgit v0.10.2 From 8f7b8db6e0557c8437adf9371e020cd89a7e85dc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 25 Sep 2012 16:40:12 +0200 Subject: iwlwifi: fix 6000 series channel switch command The channel switch command for 6000 series devices is larger than the maximum inline command size of 320 bytes. The command is therefore refused with a warning. Fix this by allocating the command and using the NOCOPY mechanism. Cc: stable@kernel.org Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c index 349c205..da58620 100644 --- a/drivers/net/wireless/iwlwifi/dvm/devices.c +++ b/drivers/net/wireless/iwlwifi/dvm/devices.c @@ -518,7 +518,7 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, * See iwlagn_mac_channel_switch. */ struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct iwl6000_channel_switch_cmd cmd; + struct iwl6000_channel_switch_cmd *cmd; u32 switch_time_in_usec, ucode_switch_time; u16 ch; u32 tsf_low; @@ -527,18 +527,25 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, struct ieee80211_vif *vif = ctx->vif; struct iwl_host_cmd hcmd = { .id = REPLY_CHANNEL_SWITCH, - .len = { sizeof(cmd), }, + .len = { sizeof(*cmd), }, .flags = CMD_SYNC, - .data = { &cmd, }, + .dataflags[0] = IWL_HCMD_DFL_NOCOPY, }; + int err; - cmd.band = priv->band == IEEE80211_BAND_2GHZ; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + hcmd.data[0] = cmd; + + cmd->band = priv->band == IEEE80211_BAND_2GHZ; ch = ch_switch->channel->hw_value; IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", ctx->active.channel, ch); - cmd.channel = cpu_to_le16(ch); - cmd.rxon_flags = ctx->staging.flags; - cmd.rxon_filter_flags = ctx->staging.filter_flags; + cmd->channel = cpu_to_le16(ch); + cmd->rxon_flags = ctx->staging.flags; + cmd->rxon_filter_flags = ctx->staging.filter_flags; switch_count = ch_switch->count; tsf_low = ch_switch->timestamp & 0x0ffffffff; /* @@ -554,23 +561,25 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, switch_count = 0; } if (switch_count <= 1) - cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); + cmd->switch_time = cpu_to_le32(priv->ucode_beacon_time); else { switch_time_in_usec = vif->bss_conf.beacon_int * switch_count * TIME_UNIT; ucode_switch_time = iwl_usecs_to_beacons(priv, switch_time_in_usec, beacon_interval); - cmd.switch_time = iwl_add_beacon_time(priv, - priv->ucode_beacon_time, - ucode_switch_time, - beacon_interval); + cmd->switch_time = iwl_add_beacon_time(priv, + priv->ucode_beacon_time, + ucode_switch_time, + beacon_interval); } IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", - cmd.switch_time); - cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR; + cmd->switch_time); + cmd->expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR; - return iwl_dvm_send_cmd(priv, &hcmd); + err = iwl_dvm_send_cmd(priv, &hcmd); + kfree(cmd); + return err; } struct iwl_lib_ops iwl6000_lib = { -- cgit v0.10.2 From 2ad5b9e4bd314fc685086b99e90e5de3bc59e26b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 16 Oct 2012 22:33:29 +0000 Subject: netfilter: xt_TEE: don't use destination address found in header Torsten Luettgert bisected TEE regression starting with commit f8126f1d5136be1 (ipv4: Adjust semantics of rt->rt_gateway.) The problem is that it tries to ARP-lookup the original destination address of the forwarded packet, not the address of the gateway. Fix this using FLOWI_FLAG_KNOWN_NH Julian added in commit c92b96553a80c1 (ipv4: Add FLOWI_FLAG_KNOWN_NH), so that known nexthop (info->gw.ip) has preference on resolving. Reported-by: Torsten Luettgert Bisected-by: Torsten Luettgert Tested-by: Torsten Luettgert Cc: Julian Anastasov Signed-off-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_TEE.c b/net/netfilter/xt_TEE.c index ee2e5bc..bd93e51 100644 --- a/net/netfilter/xt_TEE.c +++ b/net/netfilter/xt_TEE.c @@ -70,6 +70,7 @@ tee_tg_route4(struct sk_buff *skb, const struct xt_tee_tginfo *info) fl4.daddr = info->gw.ip; fl4.flowi4_tos = RT_TOS(iph->tos); fl4.flowi4_scope = RT_SCOPE_UNIVERSE; + fl4.flowi4_flags = FLOWI_FLAG_KNOWN_NH; rt = ip_route_output_key(net, &fl4); if (IS_ERR(rt)) return false; -- cgit v0.10.2 From 3a40414f826a8f1096d9b94c4a53ef91b25ba28d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 1 Oct 2012 15:52:00 +0200 Subject: mac80211: connect with HT20 if HT40 is not permitted Some changes to fix issues with HT40 APs in Korea and follow-up changes to allow using HT40 even if the local regulatory database disallows it caused issues with iwlwifi (and could cause issues with other devices); iwlwifi firmware would assert if you tried to connect to an AP that has an invalid configuration (e.g. using HT40- on channel 140.) Fix this, while avoiding the "Korean AP" issue by disabling HT40 and advertising HT20 to the AP when connecting. Cc: stable@vger.kernel.org [3.6] Reported-by: Florian Reitmeir Tested-by: Florian Reitmeir Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e510a33..1b7eed2 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3099,22 +3099,32 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, ht_cfreq, ht_oper->primary_chan, cbss->channel->band); ht_oper = NULL; + } else { + channel_type = NL80211_CHAN_HT20; } } - if (ht_oper) { - channel_type = NL80211_CHAN_HT20; + if (ht_oper && sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { + /* + * cfg80211 already verified that the channel itself can + * be used, but it didn't check that we can do the right + * HT type, so do that here as well. If HT40 isn't allowed + * on this channel, disable 40 MHz operation. + */ - if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { - switch (ht_oper->ht_param & - IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40PLUS) + ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ; + else channel_type = NL80211_CHAN_HT40PLUS; - break; - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40MINUS) + ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ; + else channel_type = NL80211_CHAN_HT40MINUS; - break; - } + break; } } -- cgit v0.10.2 From 7f112af40fecf5399b61e69ffc6b55a9d82789f7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Wed, 17 Oct 2012 14:53:04 +0200 Subject: batman-adv: Fix broadcast packet CRC calculation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit So far the crc16 checksum for a batman-adv broadcast data packet, received on a batman-adv hard interface, was calculated over zero bytes of its content leading to many incoming broadcast data packets wrongly being dropped (60-80% packet loss). This patch fixes this issue by calculating the crc16 over the actual, complete broadcast payload. The issue is a regression introduced by ("batman-adv: add broadcast duplicate check"). Signed-off-by: Linus Lüssing Acked-by: Simon Wunderlich Signed-off-by: Marek Lindner diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index 0a9084a..eebab20 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -1210,8 +1210,8 @@ int batadv_bla_init(struct batadv_priv *bat_priv) /** * batadv_bla_check_bcast_duplist * @bat_priv: the bat priv with all the soft interface information - * @bcast_packet: originator mac address - * @hdr_size: maximum length of the frame + * @bcast_packet: encapsulated broadcast frame plus batman header + * @bcast_packet_len: length of encapsulated broadcast frame plus batman header * * check if it is on our broadcast list. Another gateway might * have sent the same packet because it is connected to the same backbone, @@ -1224,14 +1224,14 @@ int batadv_bla_init(struct batadv_priv *bat_priv) */ int batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv, struct batadv_bcast_packet *bcast_packet, - int hdr_size) + int bcast_packet_len) { int i, length, curr; uint8_t *content; uint16_t crc; struct batadv_bcast_duplist_entry *entry; - length = hdr_size - sizeof(*bcast_packet); + length = bcast_packet_len - sizeof(*bcast_packet); content = (uint8_t *)bcast_packet; content += sizeof(*bcast_packet); diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c index 939fc01..376b4cc 100644 --- a/net/batman-adv/routing.c +++ b/net/batman-adv/routing.c @@ -1124,8 +1124,14 @@ int batadv_recv_bcast_packet(struct sk_buff *skb, spin_unlock_bh(&orig_node->bcast_seqno_lock); + /* keep skb linear for crc calculation */ + if (skb_linearize(skb) < 0) + goto out; + + bcast_packet = (struct batadv_bcast_packet *)skb->data; + /* check whether this has been sent by another originator before */ - if (batadv_bla_check_bcast_duplist(bat_priv, bcast_packet, hdr_size)) + if (batadv_bla_check_bcast_duplist(bat_priv, bcast_packet, skb->len)) goto out; /* rebroadcast packet */ -- cgit v0.10.2 From 7dac7b76b8db87fc79857a53a09730fb2148579b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Wed, 17 Oct 2012 14:53:05 +0200 Subject: batman-adv: Fix potential broadcast BLA-duplicate-check race condition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Threads in the bottom half of batadv_bla_check_bcast_duplist() might otherwise for instance overwrite variables which other threads might be using/reading at the same time in the top half, potentially leading to messing up the bcast_duplist, possibly resulting in false bridge loop avoidance duplicate check decisions. Signed-off-by: Linus Lüssing Acked-by: Simon Wunderlich Signed-off-by: Marek Lindner diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index eebab20..fd8d5af 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -1167,6 +1167,8 @@ int batadv_bla_init(struct batadv_priv *bat_priv) uint16_t crc; unsigned long entrytime; + spin_lock_init(&bat_priv->bla.bcast_duplist_lock); + batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla hash registering\n"); /* setting claim destination address */ @@ -1226,7 +1228,7 @@ int batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv, struct batadv_bcast_packet *bcast_packet, int bcast_packet_len) { - int i, length, curr; + int i, length, curr, ret = 0; uint8_t *content; uint16_t crc; struct batadv_bcast_duplist_entry *entry; @@ -1238,6 +1240,8 @@ int batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv, /* calculate the crc ... */ crc = crc16(0, content, length); + spin_lock_bh(&bat_priv->bla.bcast_duplist_lock); + for (i = 0; i < BATADV_DUPLIST_SIZE; i++) { curr = (bat_priv->bla.bcast_duplist_curr + i); curr %= BATADV_DUPLIST_SIZE; @@ -1259,9 +1263,12 @@ int batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv, /* this entry seems to match: same crc, not too old, * and from another gw. therefore return 1 to forbid it. */ - return 1; + ret = 1; + goto out; } - /* not found, add a new entry (overwrite the oldest entry) */ + /* not found, add a new entry (overwrite the oldest entry) + * and allow it, its the first occurence. + */ curr = (bat_priv->bla.bcast_duplist_curr + BATADV_DUPLIST_SIZE - 1); curr %= BATADV_DUPLIST_SIZE; entry = &bat_priv->bla.bcast_duplist[curr]; @@ -1270,8 +1277,10 @@ int batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv, memcpy(entry->orig, bcast_packet->orig, ETH_ALEN); bat_priv->bla.bcast_duplist_curr = curr; - /* allow it, its the first occurence. */ - return 0; +out: + spin_unlock_bh(&bat_priv->bla.bcast_duplist_lock); + + return ret; } diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 2ed82ca..ac1e07a 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -205,6 +205,8 @@ struct batadv_priv_bla { struct batadv_hashtable *backbone_hash; struct batadv_bcast_duplist_entry bcast_duplist[BATADV_DUPLIST_SIZE]; int bcast_duplist_curr; + /* protects bcast_duplist and bcast_duplist_curr */ + spinlock_t bcast_duplist_lock; struct batadv_bla_claim_dst claim_dest; struct delayed_work work; }; -- cgit v0.10.2 From af1b85e49089f945deb46258b0fc4bc9910afb22 Mon Sep 17 00:00:00 2001 From: Jay Purohit Date: Sun, 14 Oct 2012 07:07:21 +0000 Subject: usb/ipheth: Add iPhone 5 support I noticed that the iPhone ethernet driver did not support iPhone 5. I quickly added support to it in my kernel, here's a patch. Signed-off-by: Jay Purohit Acked-by: Valdis Kletnieks Signed-off-by: Jan Ceuleers Signed-off-by: David S. Miller diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c index a28a983..534d8be 100644 --- a/drivers/net/usb/ipheth.c +++ b/drivers/net/usb/ipheth.c @@ -62,6 +62,7 @@ #define USB_PRODUCT_IPAD 0x129a #define USB_PRODUCT_IPHONE_4_VZW 0x129c #define USB_PRODUCT_IPHONE_4S 0x12a0 +#define USB_PRODUCT_IPHONE_5 0x12a8 #define IPHETH_USBINTF_CLASS 255 #define IPHETH_USBINTF_SUBCLASS 253 @@ -113,6 +114,10 @@ static struct usb_device_id ipheth_table[] = { USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4S, IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, IPHETH_USBINTF_PROTO) }, + { USB_DEVICE_AND_INTERFACE_INFO( + USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_5, + IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, + IPHETH_USBINTF_PROTO) }, { } }; MODULE_DEVICE_TABLE(usb, ipheth_table); -- cgit v0.10.2 From 0ca7111a38f053ae7b8829ee32fca6f9ef47550a Mon Sep 17 00:00:00 2001 From: Matus Ujhelyi Date: Sun, 14 Oct 2012 19:07:16 +0000 Subject: phy: add AT803x driver This driver add support for wake over lan on AT803x phys. Signed-off-by: Matus Ujhelyi Signed-off-by: David S. Miller diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 983bbf4..961f0b2 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -15,6 +15,11 @@ if PHYLIB comment "MII PHY device drivers" +config AT803X_PHY + tristate "Drivers for Atheros AT803X PHYs" + ---help--- + Currently supports the AT8030 and AT8035 model + config AMD_PHY tristate "Drivers for the AMD PHYs" ---help--- diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 426674d..9645e38 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_STE10XP) += ste10Xp.o obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o +obj-$(CONFIG_AT803X_PHY) += at803x.o obj-$(CONFIG_AMD_PHY) += amd.o obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c new file mode 100644 index 0000000..45cbc10 --- /dev/null +++ b/drivers/net/phy/at803x.c @@ -0,0 +1,176 @@ +/* + * drivers/net/phy/at803x.c + * + * Driver for Atheros 803x PHY + * + * Author: Matus Ujhelyi + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#define AT803X_INTR_ENABLE 0x12 +#define AT803X_INTR_STATUS 0x13 +#define AT803X_WOL_ENABLE 0x01 +#define AT803X_DEVICE_ADDR 0x03 +#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C +#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B +#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A +#define AT803X_MMD_ACCESS_CONTROL 0x0D +#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E +#define AT803X_FUNC_DATA 0x4003 + +MODULE_DESCRIPTION("Atheros 803x PHY driver"); +MODULE_AUTHOR("Matus Ujhelyi"); +MODULE_LICENSE("GPL"); + +static void at803x_set_wol_mac_addr(struct phy_device *phydev) +{ + struct net_device *ndev = phydev->attached_dev; + const u8 *mac; + unsigned int i, offsets[] = { + AT803X_LOC_MAC_ADDR_32_47_OFFSET, + AT803X_LOC_MAC_ADDR_16_31_OFFSET, + AT803X_LOC_MAC_ADDR_0_15_OFFSET, + }; + + if (!ndev) + return; + + mac = (const u8 *) ndev->dev_addr; + + if (!is_valid_ether_addr(mac)) + return; + + for (i = 0; i < 3; i++) { + phy_write(phydev, AT803X_MMD_ACCESS_CONTROL, + AT803X_DEVICE_ADDR); + phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA, + offsets[i]); + phy_write(phydev, AT803X_MMD_ACCESS_CONTROL, + AT803X_FUNC_DATA); + phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA, + mac[(i * 2) + 1] | (mac[(i * 2)] << 8)); + } +} + +static int at803x_config_init(struct phy_device *phydev) +{ + int val; + u32 features; + int status; + + features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI | + SUPPORTED_FIBRE | SUPPORTED_BNC; + + val = phy_read(phydev, MII_BMSR); + if (val < 0) + return val; + + if (val & BMSR_ANEGCAPABLE) + features |= SUPPORTED_Autoneg; + if (val & BMSR_100FULL) + features |= SUPPORTED_100baseT_Full; + if (val & BMSR_100HALF) + features |= SUPPORTED_100baseT_Half; + if (val & BMSR_10FULL) + features |= SUPPORTED_10baseT_Full; + if (val & BMSR_10HALF) + features |= SUPPORTED_10baseT_Half; + + if (val & BMSR_ESTATEN) { + val = phy_read(phydev, MII_ESTATUS); + if (val < 0) + return val; + + if (val & ESTATUS_1000_TFULL) + features |= SUPPORTED_1000baseT_Full; + if (val & ESTATUS_1000_THALF) + features |= SUPPORTED_1000baseT_Half; + } + + phydev->supported = features; + phydev->advertising = features; + + /* enable WOL */ + at803x_set_wol_mac_addr(phydev); + status = phy_write(phydev, AT803X_INTR_ENABLE, AT803X_WOL_ENABLE); + status = phy_read(phydev, AT803X_INTR_STATUS); + + return 0; +} + +/* ATHEROS 8035 */ +static struct phy_driver at8035_driver = { + .phy_id = 0x004dd072, + .name = "Atheros 8035 ethernet", + .phy_id_mask = 0xffffffef, + .config_init = at803x_config_init, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .driver = { + .owner = THIS_MODULE, + }, +}; + +/* ATHEROS 8030 */ +static struct phy_driver at8030_driver = { + .phy_id = 0x004dd076, + .name = "Atheros 8030 ethernet", + .phy_id_mask = 0xffffffef, + .config_init = at803x_config_init, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .driver = { + .owner = THIS_MODULE, + }, +}; + +static int __init atheros_init(void) +{ + int ret; + + ret = phy_driver_register(&at8035_driver); + if (ret) + goto err1; + + ret = phy_driver_register(&at8030_driver); + if (ret) + goto err2; + + return 0; + +err2: + phy_driver_unregister(&at8035_driver); +err1: + return ret; +} + +static void __exit atheros_exit(void) +{ + phy_driver_unregister(&at8035_driver); + phy_driver_unregister(&at8030_driver); +} + +module_init(atheros_init); +module_exit(atheros_exit); + +static struct mdio_device_id __maybe_unused atheros_tbl[] = { + { 0x004dd076, 0xffffffef }, + { 0x004dd072, 0xffffffef }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, atheros_tbl); -- cgit v0.10.2 From 18c22a03a2187bcbda7d3a7fa1061584a6348e7b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 17 Oct 2012 01:37:36 +0000 Subject: vlan: allow to change type when no vlan device is hooked on netdev vlan_info might be present but still no vlan devices might be there. That is in case of vlan0 automatically added. So in that case, allow to change netdev type. Reported-by: Jon Stanley Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 9096bcb..ee07072 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -463,7 +463,9 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event, case NETDEV_PRE_TYPE_CHANGE: /* Forbid underlaying device to change its type. */ - return NOTIFY_BAD; + if (vlan_uses_dev(dev)) + return NOTIFY_BAD; + break; case NETDEV_NOTIFY_PEERS: case NETDEV_BONDING_FAILOVER: -- cgit v0.10.2 From 13d82bf50dce632355fcccafa4fe44a9b5e706d8 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 17 Oct 2012 21:17:44 +0000 Subject: ipv4: Fix flushing of cached routing informations Currently we can not flush cached pmtu/redirect informations via the ipv4_sysctl_rtcache_flush sysctl. We need to check the rt_genid of the old route and reset the nh exeption if the old route is expired when we bind a new route to a nh exeption. Signed-off-by: Steffen Klassert Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 432f4bb..a8c6512 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1163,8 +1163,12 @@ static bool rt_bind_exception(struct rtable *rt, struct fib_nh_exception *fnhe, spin_lock_bh(&fnhe_lock); if (daddr == fnhe->fnhe_daddr) { - struct rtable *orig; - + struct rtable *orig = rcu_dereference(fnhe->fnhe_rth); + if (orig && rt_is_expired(orig)) { + fnhe->fnhe_gw = 0; + fnhe->fnhe_pmtu = 0; + fnhe->fnhe_expires = 0; + } if (fnhe->fnhe_pmtu) { unsigned long expires = fnhe->fnhe_expires; unsigned long diff = expires - jiffies; @@ -1181,7 +1185,6 @@ static bool rt_bind_exception(struct rtable *rt, struct fib_nh_exception *fnhe, } else if (!rt->rt_gateway) rt->rt_gateway = daddr; - orig = rcu_dereference(fnhe->fnhe_rth); rcu_assign_pointer(fnhe->fnhe_rth, rt); if (orig) rt_free(orig); -- cgit v0.10.2 From 6d772ac5578f711d1ce7b03535d1c95bffb21dff Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 18 Oct 2012 03:21:55 +0000 Subject: netlink: use kfree_rcu() in netlink_release() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On some suspend/resume operations involving wimax device, we have noticed some intermittent memory corruptions in netlink code. Stéphane Marchesin tracked this corruption in netlink_update_listeners() and suggested a patch. It appears netlink_release() should use kfree_rcu() instead of kfree() for the listeners structure as it may be used by other cpus using RCU protection. netlink_release() must set to NULL the listeners pointer when it is about to be freed. Also have to protect netlink_update_listeners() and netlink_has_listeners() if listeners is NULL. Add a nl_deref_protected() lockdep helper to properly document which locks protects us. Reported-by: Jonathan Kliegman Signed-off-by: Eric Dumazet Cc: Stéphane Marchesin Cc: Sam Leffler Signed-off-by: David S. Miller diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 01e944a..4da797f 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -138,6 +138,8 @@ static int netlink_dump(struct sock *sk); static DEFINE_RWLOCK(nl_table_lock); static atomic_t nl_table_users = ATOMIC_INIT(0); +#define nl_deref_protected(X) rcu_dereference_protected(X, lockdep_is_held(&nl_table_lock)); + static ATOMIC_NOTIFIER_HEAD(netlink_chain); static inline u32 netlink_group_mask(u32 group) @@ -345,6 +347,11 @@ netlink_update_listeners(struct sock *sk) struct hlist_node *node; unsigned long mask; unsigned int i; + struct listeners *listeners; + + listeners = nl_deref_protected(tbl->listeners); + if (!listeners) + return; for (i = 0; i < NLGRPLONGS(tbl->groups); i++) { mask = 0; @@ -352,7 +359,7 @@ netlink_update_listeners(struct sock *sk) if (i < NLGRPLONGS(nlk_sk(sk)->ngroups)) mask |= nlk_sk(sk)->groups[i]; } - tbl->listeners->masks[i] = mask; + listeners->masks[i] = mask; } /* this function is only called with the netlink table "grabbed", which * makes sure updates are visible before bind or setsockopt return. */ @@ -536,7 +543,11 @@ static int netlink_release(struct socket *sock) if (netlink_is_kernel(sk)) { BUG_ON(nl_table[sk->sk_protocol].registered == 0); if (--nl_table[sk->sk_protocol].registered == 0) { - kfree(nl_table[sk->sk_protocol].listeners); + struct listeners *old; + + old = nl_deref_protected(nl_table[sk->sk_protocol].listeners); + RCU_INIT_POINTER(nl_table[sk->sk_protocol].listeners, NULL); + kfree_rcu(old, rcu); nl_table[sk->sk_protocol].module = NULL; nl_table[sk->sk_protocol].bind = NULL; nl_table[sk->sk_protocol].flags = 0; @@ -982,7 +993,7 @@ int netlink_has_listeners(struct sock *sk, unsigned int group) rcu_read_lock(); listeners = rcu_dereference(nl_table[sk->sk_protocol].listeners); - if (group - 1 < nl_table[sk->sk_protocol].groups) + if (listeners && group - 1 < nl_table[sk->sk_protocol].groups) res = test_bit(group - 1, listeners->masks); rcu_read_unlock(); @@ -1625,7 +1636,7 @@ int __netlink_change_ngroups(struct sock *sk, unsigned int groups) new = kzalloc(sizeof(*new) + NLGRPSZ(groups), GFP_ATOMIC); if (!new) return -ENOMEM; - old = rcu_dereference_protected(tbl->listeners, 1); + old = nl_deref_protected(tbl->listeners); memcpy(new->masks, old->masks, NLGRPSZ(tbl->groups)); rcu_assign_pointer(tbl->listeners, new); -- cgit v0.10.2 From c6846ee148e07e4cfae4de486532efb02d238938 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Thu, 18 Oct 2012 05:11:29 +0000 Subject: net: qmi_wwan: adding more ZTE devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 6883c37..9d23ba2 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -371,16 +371,57 @@ static const struct usb_device_id products[] = { }, /* 3. Combined interface devices matching on interface number */ + {QMI_FIXED_INTF(0x19d2, 0x0002, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0012, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0017, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0021, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0025, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0031, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0042, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0049, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0052, 4)}, {QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0058, 4)}, {QMI_FIXED_INTF(0x19d2, 0x0063, 4)}, /* ZTE (Vodafone) K3565-Z */ {QMI_FIXED_INTF(0x19d2, 0x0104, 4)}, /* ZTE (Vodafone) K4505-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0113, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0118, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0121, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0123, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0124, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0125, 6)}, + {QMI_FIXED_INTF(0x19d2, 0x0126, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0130, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0133, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0141, 5)}, {QMI_FIXED_INTF(0x19d2, 0x0157, 5)}, /* ZTE MF683 */ + {QMI_FIXED_INTF(0x19d2, 0x0158, 3)}, {QMI_FIXED_INTF(0x19d2, 0x0167, 4)}, /* ZTE MF820D */ + {QMI_FIXED_INTF(0x19d2, 0x0168, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0176, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0178, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0191, 4)}, /* ZTE EuFi890 */ + {QMI_FIXED_INTF(0x19d2, 0x0199, 1)}, /* ZTE MF820S */ + {QMI_FIXED_INTF(0x19d2, 0x0200, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0257, 3)}, /* ZTE MF821 */ {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */ {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */ {QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1012, 4)}, {QMI_FIXED_INTF(0x19d2, 0x1018, 3)}, /* ZTE (Vodafone) K5006-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1021, 2)}, + {QMI_FIXED_INTF(0x19d2, 0x1245, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1247, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1252, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1254, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1255, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x1255, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1256, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1401, 2)}, {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */ + {QMI_FIXED_INTF(0x19d2, 0x1424, 2)}, + {QMI_FIXED_INTF(0x19d2, 0x1425, 2)}, + {QMI_FIXED_INTF(0x19d2, 0x1426, 2)}, /* ZTE MF91 */ {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */ -- cgit v0.10.2 From a3374c42aa5f7237e87ff3b0622018636b0c847e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 18 Oct 2012 09:14:12 +0000 Subject: tcp: fix FIONREAD/SIOCINQ tcp_ioctl() tries to take into account if tcp socket received a FIN to report correct number bytes in receive queue. But its flaky because if the application ate the last skb, we return 1 instead of 0. Correct way to detect that FIN was received is to test SOCK_DONE. Reported-by: Elliot Hughes Signed-off-by: Eric Dumazet Cc: Neal Cardwell Cc: Tom Herbert Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index f32c02e..b7c2f43 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -549,14 +549,12 @@ int tcp_ioctl(struct sock *sk, int cmd, unsigned long arg) !tp->urg_data || before(tp->urg_seq, tp->copied_seq) || !before(tp->urg_seq, tp->rcv_nxt)) { - struct sk_buff *skb; answ = tp->rcv_nxt - tp->copied_seq; - /* Subtract 1, if FIN is in queue. */ - skb = skb_peek_tail(&sk->sk_receive_queue); - if (answ && skb) - answ -= tcp_hdr(skb)->fin; + /* Subtract 1, if FIN was received */ + if (answ && sock_flag(sk, SOCK_DONE)) + answ--; } else answ = tp->urg_seq - tp->copied_seq; release_sock(sk); -- cgit v0.10.2 From 9a4da2cd99e4edfee1e48c5e2b4928eaefb56006 Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Fri, 19 Oct 2012 02:09:53 +0000 Subject: cxgb4: Remove unnecessary #ifdef condition This patch also fixes the build failure caused due to removal of #ifdef CONFIG_CHELSIO_T4_OFFLOAD condition Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index a4da893..378988b 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -251,6 +251,8 @@ struct adapter_params { unsigned char rev; /* chip revision */ unsigned char offload; + unsigned char bypass; + unsigned int ofldq_wr_cred; }; @@ -642,6 +644,23 @@ extern int dbfifo_int_thresh; #define for_each_port(adapter, iter) \ for (iter = 0; iter < (adapter)->params.nports; ++iter) +static inline int is_bypass(struct adapter *adap) +{ + return adap->params.bypass; +} + +static inline int is_bypass_device(int device) +{ + /* this should be set based upon device capabilities */ + switch (device) { + case 0x440b: + case 0x440c: + return 1; + default: + return 0; + } +} + static inline unsigned int core_ticks_per_usec(const struct adapter *adap) { return adap->params.vpd.cclk / 1000; diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 604f4f8..c1cde11 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -3513,18 +3513,6 @@ static int adap_init0_no_config(struct adapter *adapter, int reset) if (ret < 0) goto bye; -#ifndef CONFIG_CHELSIO_T4_OFFLOAD - /* - * If we're a pure NIC driver then disable all offloading facilities. - * This will allow the firmware to optimize aspects of the hardware - * configuration which will result in improved performance. - */ - caps_cmd.ofldcaps = 0; - caps_cmd.iscsicaps = 0; - caps_cmd.rdmacaps = 0; - caps_cmd.fcoecaps = 0; -#endif - if (caps_cmd.niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) { if (!vf_acls) caps_cmd.niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM); @@ -3745,6 +3733,7 @@ static int adap_init0(struct adapter *adap) u32 v, port_vec; enum dev_state state; u32 params[7], val[7]; + struct fw_caps_config_cmd caps_cmd; int reset = 1, j; /* @@ -3898,6 +3887,9 @@ static int adap_init0(struct adapter *adap) goto bye; } + if (is_bypass_device(adap->pdev->device)) + adap->params.bypass = 1; + /* * Grab some of our basic fundamental operating parameters. */ @@ -3940,13 +3932,12 @@ static int adap_init0(struct adapter *adap) adap->tids.aftid_end = val[1]; } -#ifdef CONFIG_CHELSIO_T4_OFFLOAD /* * Get device capabilities so we can determine what resources we need * to manage. */ memset(&caps_cmd, 0, sizeof(caps_cmd)); - caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | FW_CMD_REQUEST | FW_CMD_READ); caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd), @@ -3991,15 +3982,6 @@ static int adap_init0(struct adapter *adap) adap->vres.ddp.size = val[4] - val[3] + 1; adap->params.ofldq_wr_cred = val[5]; - params[0] = FW_PARAM_PFVF(ETHOFLD_START); - params[1] = FW_PARAM_PFVF(ETHOFLD_END); - ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, - params, val); - if ((val[0] != val[1]) && (ret >= 0)) { - adap->tids.uotid_base = val[0]; - adap->tids.nuotids = val[1] - val[0] + 1; - } - adap->params.offload = 1; } if (caps_cmd.rdmacaps) { @@ -4048,7 +4030,6 @@ static int adap_init0(struct adapter *adap) } #undef FW_PARAM_PFVF #undef FW_PARAM_DEV -#endif /* CONFIG_CHELSIO_T4_OFFLOAD */ /* * These are finalized by FW initialization, load their values now. diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h index 1b899fe..39bec73 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h @@ -102,6 +102,9 @@ struct tid_info { unsigned int ftid_base; unsigned int aftid_base; unsigned int aftid_end; + /* Server filter region */ + unsigned int sftid_base; + unsigned int nsftids; spinlock_t atid_lock ____cacheline_aligned_in_smp; union aopen_entry *afree; -- cgit v0.10.2 From 6f73601efb35c7003f5c58c2bc6fd08f3652169c Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Fri, 19 Oct 2012 15:14:44 +0000 Subject: tcp: add SYN/data info to TCP_INFO Add a bit TCPI_OPT_SYN_DATA (32) to the socket option TCP_INFO:tcpi_options. It's set if the data in SYN (sent or received) is acked by SYN-ACK. Server or client application can use this information to check Fast Open success rate. Signed-off-by: Yuchung Cheng Acked-by: Neal Cardwell Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 8a7fc4b..60b7aac 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -191,7 +191,8 @@ struct tcp_sock { u8 do_early_retrans:1,/* Enable RFC5827 early-retransmit */ early_retrans_delayed:1, /* Delayed ER timer installed */ syn_data:1, /* SYN includes data */ - syn_fastopen:1; /* SYN includes Fast Open option */ + syn_fastopen:1, /* SYN includes Fast Open option */ + syn_data_acked:1;/* data in SYN is acked by SYN-ACK */ /* RTT measurement */ u32 srtt; /* smoothed round trip time << 3 */ diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index c4b89a5..e962faa 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -130,6 +130,7 @@ enum { #define TCPI_OPT_WSCALE 4 #define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */ #define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */ +#define TCPI_OPT_SYN_DATA 32 /* SYN-ACK acked data in SYN sent or rcvd */ enum tcp_ca_state { TCP_CA_Open = 0, diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index b7c2f43..197c000 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2764,6 +2764,8 @@ void tcp_get_info(const struct sock *sk, struct tcp_info *info) info->tcpi_options |= TCPI_OPT_ECN; if (tp->ecn_flags & TCP_ECN_SEEN) info->tcpi_options |= TCPI_OPT_ECN_SEEN; + if (tp->syn_data_acked) + info->tcpi_options |= TCPI_OPT_SYN_DATA; info->tcpi_rto = jiffies_to_usecs(icsk->icsk_rto); info->tcpi_ato = jiffies_to_usecs(icsk->icsk_ack.ato); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 432c366..036f857 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5646,6 +5646,7 @@ static bool tcp_rcv_fastopen_synack(struct sock *sk, struct sk_buff *synack, tcp_rearm_rto(sk); return true; } + tp->syn_data_acked = tp->syn_data; return false; } diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index ef998b0..0c4a643 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1461,6 +1461,7 @@ static int tcp_v4_conn_req_fastopen(struct sock *sk, skb_set_owner_r(skb, child); __skb_queue_tail(&child->sk_receive_queue, skb); tp->rcv_nxt = TCP_SKB_CB(skb)->end_seq; + tp->syn_data_acked = 1; } sk->sk_data_ready(sk, 0); bh_unlock_sock(child); diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index 27536ba..a7302d9 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -510,6 +510,7 @@ struct sock *tcp_create_openreq_child(struct sock *sk, struct request_sock *req, newtp->rx_opt.mss_clamp = req->mss; TCP_ECN_openreq_child(newtp, req); newtp->fastopen_rsk = NULL; + newtp->syn_data_acked = 0; TCP_INC_STATS_BH(sock_net(sk), TCP_MIB_PASSIVEOPENS); } -- cgit v0.10.2 From 8a6e29d6d037de0dd62fe6648ba9b29866db5416 Mon Sep 17 00:00:00 2001 From: Joe Jin Date: Sun, 21 Oct 2012 14:40:36 +0000 Subject: qla3xxx: Ensure request/response queue addr writes to the registers Before use the request and response queue addr, make sure it has wrote to the registers. Signed-off-by: Joe Jin Cc: Jitendra Kalsaria Cc: Ron Mercer Acked-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c index df09b1c..6407d0d 100644 --- a/drivers/net/ethernet/qlogic/qla3xxx.c +++ b/drivers/net/ethernet/qlogic/qla3xxx.c @@ -2525,6 +2525,13 @@ static int ql_alloc_net_req_rsp_queues(struct ql3_adapter *qdev) qdev->req_q_size = (u32) (NUM_REQ_Q_ENTRIES * sizeof(struct ob_mac_iocb_req)); + qdev->rsp_q_size = NUM_RSP_Q_ENTRIES * sizeof(struct net_rsp_iocb); + + /* The barrier is required to ensure request and response queue + * addr writes to the registers. + */ + wmb(); + qdev->req_q_virt_addr = pci_alloc_consistent(qdev->pdev, (size_t) qdev->req_q_size, @@ -2536,8 +2543,6 @@ static int ql_alloc_net_req_rsp_queues(struct ql3_adapter *qdev) return -ENOMEM; } - qdev->rsp_q_size = NUM_RSP_Q_ENTRIES * sizeof(struct net_rsp_iocb); - qdev->rsp_q_virt_addr = pci_alloc_consistent(qdev->pdev, (size_t) qdev->rsp_q_size, -- cgit v0.10.2 From 3d861f661006606bf159fd6bd973e83dbf21d0f9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 22 Oct 2012 09:03:40 +0000 Subject: net: fix secpath kmemleak Mike Kazantsev found 3.5 kernels and beyond were leaking memory, and tracked the faulty commit to a1c7fff7e18f59e ("net: netdev_alloc_skb() use build_skb()") While this commit seems fine, it uncovered a bug introduced in commit bad43ca8325 ("net: introduce skb_try_coalesce()), in function kfree_skb_partial()"): If head is stolen, we free the sk_buff, without removing references on secpath (skb->sp). So IPsec + IP defrag/reassembly (using skb coalescing), or TCP coalescing could leak secpath objects. Fix this bug by calling skb_release_head_state(skb) to properly release all possible references to linked objects. Reported-by: Mike Kazantsev Signed-off-by: Eric Dumazet Bisected-by: Mike Kazantsev Tested-by: Mike Kazantsev Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 6e04b1f..4007c14 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3379,10 +3379,12 @@ EXPORT_SYMBOL(__skb_warn_lro_forwarding); void kfree_skb_partial(struct sk_buff *skb, bool head_stolen) { - if (head_stolen) + if (head_stolen) { + skb_release_head_state(skb); kmem_cache_free(skbuff_head_cache, skb); - else + } else { __kfree_skb(skb); + } } EXPORT_SYMBOL(kfree_skb_partial); -- cgit v0.10.2 From e408a9ff3c7c371d0e2a47a9eb8fa3de48fea30d Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Mon, 22 Oct 2012 04:43:23 +0000 Subject: pch_gbe: create functions for MAC_RX {en,dis}able Move MAC_RX-related bits into separate functions. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index b2a94d0..d5190bf 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -420,6 +420,22 @@ static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw) return; } +static void pch_gbe_disable_mac_rx(struct pch_gbe_hw *hw) +{ + u32 rctl; + /* Disables Receive MAC */ + rctl = ioread32(&hw->reg->MAC_RX_EN); + iowrite32((rctl & ~PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN); +} + +static void pch_gbe_enable_mac_rx(struct pch_gbe_hw *hw) +{ + u32 rctl; + /* Enables Receive MAC */ + rctl = ioread32(&hw->reg->MAC_RX_EN); + iowrite32((rctl | PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN); +} + /** * pch_gbe_mac_init_rx_addrs - Initialize receive address's * @hw: Pointer to the HW structure @@ -913,7 +929,7 @@ static void pch_gbe_setup_rctl(struct pch_gbe_adapter *adapter) static void pch_gbe_configure_rx(struct pch_gbe_adapter *adapter) { struct pch_gbe_hw *hw = &adapter->hw; - u32 rdba, rdlen, rctl, rxdma; + u32 rdba, rdlen, rxdma; pr_debug("dma adr = 0x%08llx size = 0x%08x\n", (unsigned long long)adapter->rx_ring->dma, @@ -921,9 +937,7 @@ static void pch_gbe_configure_rx(struct pch_gbe_adapter *adapter) pch_gbe_mac_force_mac_fc(hw); - /* Disables Receive MAC */ - rctl = ioread32(&hw->reg->MAC_RX_EN); - iowrite32((rctl & ~PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN); + pch_gbe_disable_mac_rx(hw); /* Disables Receive DMA */ rxdma = ioread32(&hw->reg->DMA_CTRL); @@ -1355,8 +1369,8 @@ static void pch_gbe_start_receive(struct pch_gbe_hw *hw) rxdma = ioread32(&hw->reg->DMA_CTRL); rxdma |= PCH_GBE_RX_DMA_EN; iowrite32(rxdma, &hw->reg->DMA_CTRL); - /* Enables Receive */ - iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN); + + pch_gbe_enable_mac_rx(hw); return; } -- cgit v0.10.2 From 9c0314e111a540620441b27aeedb55f572f812f5 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Mon, 22 Oct 2012 04:43:24 +0000 Subject: pch_gbe: don't re-set RX_FIFO_ERR flag in napi_poll If we were in RX_FIFO_ERR state and entered pch_gbe_napi_poll(), we'll anyway clean some rx space and thus can continue to receive more packets. Currently, we re-set the RX_FIFO_ERR in situations when we've exhausted our budget for RX cleaning or cleaned some TX packets. Removing it gives us +20%-40% speed increase and a lot less of RX_FIFO_ERRors reported. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index d5190bf..4ffad78 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -2419,7 +2419,6 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget) int work_done = 0; bool poll_end_flag = false; bool cleaned = false; - u32 int_en; pr_debug("budget : %d\n", budget); @@ -2436,19 +2435,13 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget) if (poll_end_flag) { napi_complete(napi); - if (adapter->rx_stop_flag) { - adapter->rx_stop_flag = false; - pch_gbe_start_receive(&adapter->hw); - } pch_gbe_irq_enable(adapter); - } else - if (adapter->rx_stop_flag) { - adapter->rx_stop_flag = false; - pch_gbe_start_receive(&adapter->hw); - int_en = ioread32(&adapter->hw.reg->INT_EN); - iowrite32((int_en | PCH_GBE_INT_RX_FIFO_ERR), - &adapter->hw.reg->INT_EN); - } + } + + if (adapter->rx_stop_flag) { + adapter->rx_stop_flag = false; + pch_gbe_start_receive(&adapter->hw); + } pr_debug("poll_end_flag : %d work_done : %d budget : %d\n", poll_end_flag, work_done, budget); -- cgit v0.10.2 From a35279f002c5843c2b2faaa4538963c8eb18446c Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Mon, 22 Oct 2012 04:43:25 +0000 Subject: pch_gbe: don't reset MAC_RX on FIFO overflow Currently, when FIFO_ERR happens, we stop the dma, wait for it to become idle and then reset the whole MAC_RX logic (and after that we must re-set multicast addresses and also re-enable MAC_RX when we're finally ready to accept new packets). This leads to CRC errors on high number of incoming packets and is not needed according to the datasheet. This patch fixes it by the following steps: 1) remove this reset in pch_gbe_stop_receive(), which causes some functions to not be used anywhere 2) remove already unused functions pch_gbe_wait_clr_bit_irq() and pch_gbe_mac_reset_rx() to correctly build 3) move pch_gbe_enable_mac_rx() out of pch_gbe_start_receive() to pch_gbe_up() where it's only needed after we've removed the MAC_RX reset 4) rename pch_gbe_start/stop_receive() to pch_gbe_enable/disable_dma_rx() to more precisely reflect what the functions are now doing. After these changes we already don't see the CRC errors and gain some increase in RX processing speed. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 4ffad78..a8854d0 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -339,26 +339,6 @@ static void pch_gbe_wait_clr_bit(void *reg, u32 bit) } /** - * pch_gbe_wait_clr_bit_irq - Wait to clear a bit for interrupt context - * @reg: Pointer of register - * @busy: Busy bit - */ -static int pch_gbe_wait_clr_bit_irq(void *reg, u32 bit) -{ - u32 tmp; - int ret = -1; - /* wait busy */ - tmp = 20; - while ((ioread32(reg) & bit) && --tmp) - udelay(5); - if (!tmp) - pr_err("Error: busy bit is not cleared\n"); - else - ret = 0; - return ret; -} - -/** * pch_gbe_mac_mar_set - Set MAC address register * @hw: Pointer to the HW structure * @addr: Pointer to the MAC address @@ -409,17 +389,6 @@ static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw) return; } -static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw) -{ - /* Read the MAC addresses. and store to the private data */ - pch_gbe_mac_read_mac_addr(hw); - iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET); - pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST); - /* Setup the MAC addresses */ - pch_gbe_mac_mar_set(hw, hw->mac.addr, 0); - return; -} - static void pch_gbe_disable_mac_rx(struct pch_gbe_hw *hw) { u32 rctl; @@ -1330,38 +1299,17 @@ void pch_gbe_update_stats(struct pch_gbe_adapter *adapter) spin_unlock_irqrestore(&adapter->stats_lock, flags); } -static void pch_gbe_stop_receive(struct pch_gbe_adapter *adapter) +static void pch_gbe_disable_dma_rx(struct pch_gbe_hw *hw) { - struct pch_gbe_hw *hw = &adapter->hw; u32 rxdma; - u16 value; - int ret; /* Disable Receive DMA */ rxdma = ioread32(&hw->reg->DMA_CTRL); rxdma &= ~PCH_GBE_RX_DMA_EN; iowrite32(rxdma, &hw->reg->DMA_CTRL); - /* Wait Rx DMA BUS is IDLE */ - ret = pch_gbe_wait_clr_bit_irq(&hw->reg->RX_DMA_ST, PCH_GBE_IDLE_CHECK); - if (ret) { - /* Disable Bus master */ - pci_read_config_word(adapter->pdev, PCI_COMMAND, &value); - value &= ~PCI_COMMAND_MASTER; - pci_write_config_word(adapter->pdev, PCI_COMMAND, value); - /* Stop Receive */ - pch_gbe_mac_reset_rx(hw); - /* Enable Bus master */ - value |= PCI_COMMAND_MASTER; - pci_write_config_word(adapter->pdev, PCI_COMMAND, value); - } else { - /* Stop Receive */ - pch_gbe_mac_reset_rx(hw); - } - /* reprogram multicast address register after reset */ - pch_gbe_set_multi(adapter->netdev); } -static void pch_gbe_start_receive(struct pch_gbe_hw *hw) +static void pch_gbe_enable_dma_rx(struct pch_gbe_hw *hw) { u32 rxdma; @@ -1369,9 +1317,6 @@ static void pch_gbe_start_receive(struct pch_gbe_hw *hw) rxdma = ioread32(&hw->reg->DMA_CTRL); rxdma |= PCH_GBE_RX_DMA_EN; iowrite32(rxdma, &hw->reg->DMA_CTRL); - - pch_gbe_enable_mac_rx(hw); - return; } /** @@ -1407,7 +1352,7 @@ static irqreturn_t pch_gbe_intr(int irq, void *data) int_en = ioread32(&hw->reg->INT_EN); iowrite32((int_en & ~PCH_GBE_INT_RX_FIFO_ERR), &hw->reg->INT_EN); - pch_gbe_stop_receive(adapter); + pch_gbe_disable_dma_rx(&adapter->hw); int_st |= ioread32(&hw->reg->INT_ST); int_st = int_st & ioread32(&hw->reg->INT_EN); } @@ -2014,7 +1959,8 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter) pch_gbe_alloc_tx_buffers(adapter, tx_ring); pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count); adapter->tx_queue_len = netdev->tx_queue_len; - pch_gbe_start_receive(&adapter->hw); + pch_gbe_enable_dma_rx(&adapter->hw); + pch_gbe_enable_mac_rx(&adapter->hw); mod_timer(&adapter->watchdog_timer, jiffies); @@ -2440,7 +2386,7 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget) if (adapter->rx_stop_flag) { adapter->rx_stop_flag = false; - pch_gbe_start_receive(&adapter->hw); + pch_gbe_enable_dma_rx(&adapter->hw); } pr_debug("poll_end_flag : %d work_done : %d budget : %d\n", -- cgit v0.10.2 From 0b63bf1fe6f9ed1ec4148e8896f4522e08476b80 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 18 Oct 2012 22:11:38 +0200 Subject: MAINTAINERS: NETWORKING DRIVERS matches too much File pattern include/linux/*device.h matches too much, including completely unrelated files. Replace it with an explicit list of network device-related header files. Signed-off-by: Jean Delvare Cc: Joe Perches Acked-by: David S. Miller Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 41c5349..8184adb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5060,7 +5060,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git S: Odd Fixes F: drivers/net/ F: include/linux/if_* -F: include/linux/*device.h +F: include/linux/netdevice.h +F: include/linux/arcdevice.h +F: include/linux/etherdevice.h +F: include/linux/fcdevice.h +F: include/linux/fddidevice.h +F: include/linux/hippidevice.h +F: include/linux/inetdevice.h NETXEN (1/10) GbE SUPPORT M: Sony Chacko -- cgit v0.10.2 From 37561f68bd527ec39076e32effdc7b1dcdfb17ea Mon Sep 17 00:00:00 2001 From: Jerry Chu Date: Mon, 22 Oct 2012 11:26:36 +0000 Subject: tcp: Reject invalid ack_seq to Fast Open sockets A packet with an invalid ack_seq may cause a TCP Fast Open socket to switch to the unexpected TCP_CLOSING state, triggering a BUG_ON kernel panic. When a FIN packet with an invalid ack_seq# arrives at a socket in the TCP_FIN_WAIT1 state, rather than discarding the packet, the current code will accept the FIN, causing state transition to TCP_CLOSING. This may be a small deviation from RFC793, which seems to say that the packet should be dropped. Unfortunately I did not expect this case for Fast Open hence it will trigger a BUG_ON panic. It turns out there is really nothing bad about a TFO socket going into TCP_CLOSING state so I could just remove the BUG_ON statements. But after some thought I think it's better to treat this case like TCP_SYN_RECV and return a RST to the confused peer who caused the unacceptable ack_seq to be generated in the first place. Signed-off-by: H.K. Jerry Chu Cc: Neal Cardwell Cc: Yuchung Cheng Acked-by: Yuchung Cheng Acked-by: Eric Dumazet Acked-by: Neal Cardwell Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 036f857..1db6639 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5964,7 +5964,7 @@ int tcp_rcv_state_process(struct sock *sk, struct sk_buff *skb, req = tp->fastopen_rsk; if (req != NULL) { - BUG_ON(sk->sk_state != TCP_SYN_RECV && + WARN_ON_ONCE(sk->sk_state != TCP_SYN_RECV && sk->sk_state != TCP_FIN_WAIT1); if (tcp_check_req(sk, skb, req, NULL, true) == NULL) @@ -6053,7 +6053,15 @@ int tcp_rcv_state_process(struct sock *sk, struct sk_buff *skb, * ACK we have received, this would have acknowledged * our SYNACK so stop the SYNACK timer. */ - if (acceptable && req != NULL) { + if (req != NULL) { + /* Return RST if ack_seq is invalid. + * Note that RFC793 only says to generate a + * DUPACK for it but for TCP Fast Open it seems + * better to treat this case like TCP_SYN_RECV + * above. + */ + if (!acceptable) + return 1; /* We no longer need the request sock. */ reqsk_fastopen_remove(sk, req, false); tcp_rearm_rto(sk); diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c index fc04711..d47c1b4 100644 --- a/net/ipv4/tcp_timer.c +++ b/net/ipv4/tcp_timer.c @@ -347,8 +347,8 @@ void tcp_retransmit_timer(struct sock *sk) return; } if (tp->fastopen_rsk) { - BUG_ON(sk->sk_state != TCP_SYN_RECV && - sk->sk_state != TCP_FIN_WAIT1); + WARN_ON_ONCE(sk->sk_state != TCP_SYN_RECV && + sk->sk_state != TCP_FIN_WAIT1); tcp_fastopen_synack_timer(sk); /* Before we receive ACK to our SYN-ACK don't retransmit * anything else (e.g., data or FIN segments). -- cgit v0.10.2 From bb698ca41ba574b3066ebbc5766e5980ae0051ca Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Wed, 10 Oct 2012 21:10:42 +0200 Subject: can: flexcan: disable bus error interrupts for the i.MX6q This patch adds some Flexcan version info and removes the feature flag FLEXCAN_HAS_BROKEN_ERR_STATE for the i.MX6Q. It also has the line [TR]WRN_INT properly connected. Cc: Hui Wang Cc: Shawn Guo Signed-off-by: Wolfgang Grandegger [mkl: convert to incremental patch] Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index c78ecfc..a412bf6 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -144,9 +144,22 @@ #define FLEXCAN_MB_CODE_MASK (0xf0ffffff) -/* FLEXCAN hardware feature flags */ +/* + * FLEXCAN hardware feature flags + * + * Below is some version info we got: + * SOC Version IP-Version Glitch- [TR]WRN_INT + * Filter? connected? + * MX25 FlexCAN2 03.00.00.00 no no + * MX28 FlexCAN2 03.00.04.00 yes yes + * MX35 FlexCAN2 03.00.00.00 no no + * MX53 FlexCAN2 03.00.00.00 yes no + * MX6s FlexCAN3 10.00.12.00 yes yes + * + * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected. + */ #define FLEXCAN_HAS_V10_FEATURES BIT(1) /* For core version >= 10 */ -#define FLEXCAN_HAS_BROKEN_ERR_STATE BIT(2) /* Broken error state handling */ +#define FLEXCAN_HAS_BROKEN_ERR_STATE BIT(2) /* [TR]WRN_INT not connected */ /* Structure of the message buffer */ struct flexcan_mb { @@ -205,7 +218,7 @@ static struct flexcan_devtype_data fsl_p1010_devtype_data = { }; static struct flexcan_devtype_data fsl_imx28_devtype_data; static struct flexcan_devtype_data fsl_imx6q_devtype_data = { - .features = FLEXCAN_HAS_V10_FEATURES | FLEXCAN_HAS_BROKEN_ERR_STATE, + .features = FLEXCAN_HAS_V10_FEATURES, }; static const struct can_bittiming_const flexcan_bittiming_const = { -- cgit v0.10.2 From fc09e3672ed623f9c8e73ded3cbcd2cfcf304aac Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Tue, 23 Oct 2012 12:37:17 +0200 Subject: can: sja1000: fix/add miniPCIe/cPCI PC/104Plus PCI/104e PEAK-System boards This patch adds the support for 4 new PCI boards based on the SJA1000 CAN controller, from PEAK-System Technik: . PCAN-miniPCIe (PCI-Express Mini slots, available as single or dual-channel) . PCAN-cPCI (CompactPCI format, available as single or dual-channel) . PCAN-PC/104-Plus (PC/104-Plus system, av. as 1, 2 or 4 channels) . PCAN-PCI/104-Express (PCI/104-Express system, av. as 1 or 2 channels) This patch also fixes a typo in existing "PEAK_MPCI_DEVICE_ID" identifier (missing "e" for Express). Finally, it also changes the author as well as it updates the module supported devices list. Signed-off-by: Stephane Grosjean Acked-by: Oliver Hartkopp Acked-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c index f5b82ae..6525dbc 100644 --- a/drivers/net/can/sja1000/peak_pci.c +++ b/drivers/net/can/sja1000/peak_pci.c @@ -30,9 +30,10 @@ #include "sja1000.h" -MODULE_AUTHOR("Wolfgang Grandegger "); +MODULE_AUTHOR("Stephane Grosjean "); MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards"); MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe/PCIeC miniPCI CAN cards"); +MODULE_SUPPORTED_DEVICE("PEAK PCAN miniPCIe/cPCI PC/104+ PCI/104e CAN Cards"); MODULE_LICENSE("GPL v2"); #define DRV_NAME "peak_pci" @@ -64,7 +65,11 @@ struct peak_pci_chan { #define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */ #define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */ #define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */ -#define PEAK_MPCI_DEVICE_ID 0x0008 /* The miniPCI slot cards */ +#define PEAK_CPCI_DEVICE_ID 0x0004 /* for nextgen cPCI slot cards */ +#define PEAK_MPCI_DEVICE_ID 0x0005 /* for nextgen miniPCI slot cards */ +#define PEAK_PC_104P_DEVICE_ID 0x0006 /* PCAN-PC/104+ cards */ +#define PEAK_PCI_104E_DEVICE_ID 0x0007 /* PCAN-PCI/104 Express cards */ +#define PEAK_MPCIE_DEVICE_ID 0x0008 /* The miniPCIe slot cards */ #define PEAK_PCI_CHAN_MAX 4 @@ -76,6 +81,10 @@ static DEFINE_PCI_DEVICE_TABLE(peak_pci_tbl) = { {PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, {PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, {PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_MPCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, #ifdef CONFIG_CAN_PEAK_PCIEC {PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, #endif -- cgit v0.10.2 From 0c7e92075f6e61bfc90ec2664c034b04bc157315 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sun, 14 Oct 2012 22:15:48 +0200 Subject: rtlwifi: pass rx setup error code to caller If _rtl_usb_receive fails, the device is probably not ready. Hence the error code should be passed to the caller, so it can react accordingly and notify the user. Signed-off-by: Christian Lamparter Acked-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index 030beb4..e3ea4b3 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -673,7 +673,7 @@ static int rtl_usb_start(struct ieee80211_hw *hw) set_hal_start(rtlhal); /* Start bulk IN */ - _rtl_usb_receive(hw); + err = _rtl_usb_receive(hw); } return err; -- cgit v0.10.2 From 761ce8c41ed20ee3af77f2df527edc3f92e6f3bf Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 16 Oct 2012 14:34:12 +0200 Subject: rt2x00: usb: fix reset resume Patch fixes warnings like below happened on resume: WARNING: at net/mac80211/driver-ops.h:12 check_sdata_in_driver+0x32/0x34() Problem is that in __ieee80211_susped() we remove sdata (i.e wlan0 interface) and then during resume we call usb_unbind_interface() -> ieee80211_unregister_hw() with sdata removed. Patch fixes problem by adding .reset_resume calback, hence we do not unbind usb device on resume. This callback can be the same as normal .resume callback, sice we do all needed initalization during interface start, which is performed on resume [ ieee80211_resume() -> ieee80211_reconfig() -> rt2x00mac_start() -> rt2x00lib_start ]. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=48041 Reported-by: David Herrmann Reported-and-tested-by: Stephen Boyd Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index a12e84f..6b2e1e43 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1988,6 +1988,7 @@ static struct usb_driver rt2500usb_driver = { .disconnect = rt2x00usb_disconnect, .suspend = rt2x00usb_suspend, .resume = rt2x00usb_resume, + .reset_resume = rt2x00usb_resume, .disable_hub_initiated_lpm = 1, }; diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index c9e9370..3b8fb5a 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1282,6 +1282,7 @@ static struct usb_driver rt2800usb_driver = { .disconnect = rt2x00usb_disconnect, .suspend = rt2x00usb_suspend, .resume = rt2x00usb_resume, + .reset_resume = rt2x00usb_resume, .disable_hub_initiated_lpm = 1, }; diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index e5eb43b..24eec66 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2535,6 +2535,7 @@ static struct usb_driver rt73usb_driver = { .disconnect = rt2x00usb_disconnect, .suspend = rt2x00usb_suspend, .resume = rt2x00usb_resume, + .reset_resume = rt2x00usb_resume, .disable_hub_initiated_lpm = 1, }; -- cgit v0.10.2 From 763cbac07674a648f1377b21ca66f577c103fa9a Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Tue, 16 Oct 2012 21:31:49 +0530 Subject: ath9k_htc: Add PID/VID for a Ubiquiti WiFiStation Roger says, Ubiquiti produce 2 versions of their WiFiStation USB adapter. One has an internal antenna, the other has an external antenna and name suffix EXT. They have separate USB ids and in distribution openSUSE 12.2 (kernel 3.4.6), file /usr/share/usb.ids shows: 0cf3 Atheros Communications, Inc. ... b002 Ubiquiti WiFiStation 802.11n [Atheros AR9271] b003 Ubiquiti WiFiStationEXT 802.11n [Atheros AR9271] Add b002 Ubiquiti WiFiStation in the PID/VID list. Reported-by: Roger Price Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 924c461..f5dda84 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -38,6 +38,7 @@ static struct usb_device_id ath9k_hif_usb_ids[] = { { USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */ { USB_DEVICE(0x040D, 0x3801) }, /* VIA */ { USB_DEVICE(0x0cf3, 0xb003) }, /* Ubiquiti WifiStation Ext */ + { USB_DEVICE(0x0cf3, 0xb002) }, /* Ubiquiti WifiStation */ { USB_DEVICE(0x057c, 0x8403) }, /* AVM FRITZ!WLAN 11N v2 USB */ { USB_DEVICE(0x0cf3, 0x7015), -- cgit v0.10.2 From 73b26df5fa1a6245d6fc982362518b620bc7c2fe Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 17 Oct 2012 13:50:43 +0200 Subject: Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz" This reverts commit a240dc7b3c7463bd60cf0a9b2a90f52f78aae0fd. This commit is reducing tx power by at least 10 db on some devices, e.g. the Buffalo WZR-HP-G450H. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Cc: rmanohar@qca.qualcomm.com Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h index 89bf94d..6f7cf49 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h @@ -534,107 +534,107 @@ static const u32 ar9300_2p2_baseband_core[][2] = { static const u32 ar9300Modes_high_power_tx_gain_table_2p2[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ - {0x0000a2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, - {0x0000a2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, - {0x0000a2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000a2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, + {0x0000a2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, + {0x0000a2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002}, {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004}, {0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200}, - {0x0000a510, 0x15000028, 0x15000028, 0x0f000202, 0x0f000202}, - {0x0000a514, 0x1b00002b, 0x1b00002b, 0x12000400, 0x12000400}, - {0x0000a518, 0x1f020028, 0x1f020028, 0x16000402, 0x16000402}, - {0x0000a51c, 0x2502002b, 0x2502002b, 0x19000404, 0x19000404}, - {0x0000a520, 0x2a04002a, 0x2a04002a, 0x1c000603, 0x1c000603}, - {0x0000a524, 0x2e06002a, 0x2e06002a, 0x21000a02, 0x21000a02}, - {0x0000a528, 0x3302202d, 0x3302202d, 0x25000a04, 0x25000a04}, - {0x0000a52c, 0x3804202c, 0x3804202c, 0x28000a20, 0x28000a20}, - {0x0000a530, 0x3c06202c, 0x3c06202c, 0x2c000e20, 0x2c000e20}, - {0x0000a534, 0x4108202d, 0x4108202d, 0x30000e22, 0x30000e22}, - {0x0000a538, 0x4506402d, 0x4506402d, 0x34000e24, 0x34000e24}, - {0x0000a53c, 0x4906222d, 0x4906222d, 0x38001640, 0x38001640}, - {0x0000a540, 0x4d062231, 0x4d062231, 0x3c001660, 0x3c001660}, - {0x0000a544, 0x50082231, 0x50082231, 0x3f001861, 0x3f001861}, - {0x0000a548, 0x5608422e, 0x5608422e, 0x43001a81, 0x43001a81}, - {0x0000a54c, 0x5a08442e, 0x5a08442e, 0x47001a83, 0x47001a83}, - {0x0000a550, 0x5e0a4431, 0x5e0a4431, 0x4a001c84, 0x4a001c84}, - {0x0000a554, 0x640a4432, 0x640a4432, 0x4e001ce3, 0x4e001ce3}, - {0x0000a558, 0x680a4434, 0x680a4434, 0x52001ce5, 0x52001ce5}, - {0x0000a55c, 0x6c0a6434, 0x6c0a6434, 0x56001ce9, 0x56001ce9}, - {0x0000a560, 0x6f0a6633, 0x6f0a6633, 0x5a001ceb, 0x5a001ceb}, - {0x0000a564, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, - {0x0000a568, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, - {0x0000a56c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, - {0x0000a570, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, - {0x0000a574, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, - {0x0000a578, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, - {0x0000a57c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202}, + {0x0000a514, 0x1c000223, 0x1c000223, 0x12000400, 0x12000400}, + {0x0000a518, 0x21002220, 0x21002220, 0x16000402, 0x16000402}, + {0x0000a51c, 0x27002223, 0x27002223, 0x19000404, 0x19000404}, + {0x0000a520, 0x2b022220, 0x2b022220, 0x1c000603, 0x1c000603}, + {0x0000a524, 0x2f022222, 0x2f022222, 0x21000a02, 0x21000a02}, + {0x0000a528, 0x34022225, 0x34022225, 0x25000a04, 0x25000a04}, + {0x0000a52c, 0x3a02222a, 0x3a02222a, 0x28000a20, 0x28000a20}, + {0x0000a530, 0x3e02222c, 0x3e02222c, 0x2c000e20, 0x2c000e20}, + {0x0000a534, 0x4202242a, 0x4202242a, 0x30000e22, 0x30000e22}, + {0x0000a538, 0x4702244a, 0x4702244a, 0x34000e24, 0x34000e24}, + {0x0000a53c, 0x4b02244c, 0x4b02244c, 0x38001640, 0x38001640}, + {0x0000a540, 0x4e02246c, 0x4e02246c, 0x3c001660, 0x3c001660}, + {0x0000a544, 0x52022470, 0x52022470, 0x3f001861, 0x3f001861}, + {0x0000a548, 0x55022490, 0x55022490, 0x43001a81, 0x43001a81}, + {0x0000a54c, 0x59022492, 0x59022492, 0x47001a83, 0x47001a83}, + {0x0000a550, 0x5d022692, 0x5d022692, 0x4a001c84, 0x4a001c84}, + {0x0000a554, 0x61022892, 0x61022892, 0x4e001ce3, 0x4e001ce3}, + {0x0000a558, 0x65024890, 0x65024890, 0x52001ce5, 0x52001ce5}, + {0x0000a55c, 0x69024892, 0x69024892, 0x56001ce9, 0x56001ce9}, + {0x0000a560, 0x6e024c92, 0x6e024c92, 0x5a001ceb, 0x5a001ceb}, + {0x0000a564, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, + {0x0000a568, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, + {0x0000a56c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, + {0x0000a570, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, + {0x0000a574, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, + {0x0000a578, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, + {0x0000a57c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, {0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000}, {0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002}, {0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004}, {0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200}, - {0x0000a590, 0x15800028, 0x15800028, 0x0f800202, 0x0f800202}, - {0x0000a594, 0x1b80002b, 0x1b80002b, 0x12800400, 0x12800400}, - {0x0000a598, 0x1f820028, 0x1f820028, 0x16800402, 0x16800402}, - {0x0000a59c, 0x2582002b, 0x2582002b, 0x19800404, 0x19800404}, - {0x0000a5a0, 0x2a84002a, 0x2a84002a, 0x1c800603, 0x1c800603}, - {0x0000a5a4, 0x2e86002a, 0x2e86002a, 0x21800a02, 0x21800a02}, - {0x0000a5a8, 0x3382202d, 0x3382202d, 0x25800a04, 0x25800a04}, - {0x0000a5ac, 0x3884202c, 0x3884202c, 0x28800a20, 0x28800a20}, - {0x0000a5b0, 0x3c86202c, 0x3c86202c, 0x2c800e20, 0x2c800e20}, - {0x0000a5b4, 0x4188202d, 0x4188202d, 0x30800e22, 0x30800e22}, - {0x0000a5b8, 0x4586402d, 0x4586402d, 0x34800e24, 0x34800e24}, - {0x0000a5bc, 0x4986222d, 0x4986222d, 0x38801640, 0x38801640}, - {0x0000a5c0, 0x4d862231, 0x4d862231, 0x3c801660, 0x3c801660}, - {0x0000a5c4, 0x50882231, 0x50882231, 0x3f801861, 0x3f801861}, - {0x0000a5c8, 0x5688422e, 0x5688422e, 0x43801a81, 0x43801a81}, - {0x0000a5cc, 0x5a88442e, 0x5a88442e, 0x47801a83, 0x47801a83}, - {0x0000a5d0, 0x5e8a4431, 0x5e8a4431, 0x4a801c84, 0x4a801c84}, - {0x0000a5d4, 0x648a4432, 0x648a4432, 0x4e801ce3, 0x4e801ce3}, - {0x0000a5d8, 0x688a4434, 0x688a4434, 0x52801ce5, 0x52801ce5}, - {0x0000a5dc, 0x6c8a6434, 0x6c8a6434, 0x56801ce9, 0x56801ce9}, - {0x0000a5e0, 0x6f8a6633, 0x6f8a6633, 0x5a801ceb, 0x5a801ceb}, - {0x0000a5e4, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, - {0x0000a5e8, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, - {0x0000a5ec, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, - {0x0000a5f0, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, - {0x0000a5f4, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, - {0x0000a5f8, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, - {0x0000a5fc, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, + {0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202}, + {0x0000a594, 0x1c800223, 0x1c800223, 0x12800400, 0x12800400}, + {0x0000a598, 0x21802220, 0x21802220, 0x16800402, 0x16800402}, + {0x0000a59c, 0x27802223, 0x27802223, 0x19800404, 0x19800404}, + {0x0000a5a0, 0x2b822220, 0x2b822220, 0x1c800603, 0x1c800603}, + {0x0000a5a4, 0x2f822222, 0x2f822222, 0x21800a02, 0x21800a02}, + {0x0000a5a8, 0x34822225, 0x34822225, 0x25800a04, 0x25800a04}, + {0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x28800a20, 0x28800a20}, + {0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2c800e20, 0x2c800e20}, + {0x0000a5b4, 0x4282242a, 0x4282242a, 0x30800e22, 0x30800e22}, + {0x0000a5b8, 0x4782244a, 0x4782244a, 0x34800e24, 0x34800e24}, + {0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x38801640, 0x38801640}, + {0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x3c801660, 0x3c801660}, + {0x0000a5c4, 0x52822470, 0x52822470, 0x3f801861, 0x3f801861}, + {0x0000a5c8, 0x55822490, 0x55822490, 0x43801a81, 0x43801a81}, + {0x0000a5cc, 0x59822492, 0x59822492, 0x47801a83, 0x47801a83}, + {0x0000a5d0, 0x5d822692, 0x5d822692, 0x4a801c84, 0x4a801c84}, + {0x0000a5d4, 0x61822892, 0x61822892, 0x4e801ce3, 0x4e801ce3}, + {0x0000a5d8, 0x65824890, 0x65824890, 0x52801ce5, 0x52801ce5}, + {0x0000a5dc, 0x69824892, 0x69824892, 0x56801ce9, 0x56801ce9}, + {0x0000a5e0, 0x6e824c92, 0x6e824c92, 0x5a801ceb, 0x5a801ceb}, + {0x0000a5e4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, + {0x0000a5e8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, + {0x0000a5ec, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, + {0x0000a5f0, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, + {0x0000a5f4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, + {0x0000a5f8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, + {0x0000a5fc, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, - {0x0000a608, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, - {0x0000a60c, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, - {0x0000a610, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, - {0x0000a614, 0x01804601, 0x01804601, 0x01404000, 0x01404000}, - {0x0000a618, 0x01804601, 0x01804601, 0x01404501, 0x01404501}, - {0x0000a61c, 0x01804601, 0x01804601, 0x02008501, 0x02008501}, - {0x0000a620, 0x03408d02, 0x03408d02, 0x0280ca03, 0x0280ca03}, - {0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04}, - {0x0000a628, 0x03410d04, 0x03410d04, 0x04014c04, 0x04014c04}, - {0x0000a62c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, - {0x0000a630, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, - {0x0000a634, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, - {0x0000a638, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, - {0x0000a63c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, - {0x0000b2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, - {0x0000b2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, - {0x0000b2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a614, 0x02004000, 0x02004000, 0x01404000, 0x01404000}, + {0x0000a618, 0x02004801, 0x02004801, 0x01404501, 0x01404501}, + {0x0000a61c, 0x02808a02, 0x02808a02, 0x02008501, 0x02008501}, + {0x0000a620, 0x0380ce03, 0x0380ce03, 0x0280ca03, 0x0280ca03}, + {0x0000a624, 0x04411104, 0x04411104, 0x03010c04, 0x03010c04}, + {0x0000a628, 0x04411104, 0x04411104, 0x04014c04, 0x04014c04}, + {0x0000a62c, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a630, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a634, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a638, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a63c, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000b2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, + {0x0000b2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, + {0x0000b2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, - {0x0000c2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, - {0x0000c2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, - {0x0000c2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000c2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, + {0x0000c2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, + {0x0000c2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, {0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, {0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, - {0x00016048, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, + {0x00016048, 0x66480001, 0x66480001, 0x66480001, 0x66480001}, {0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, {0x00016444, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, - {0x00016448, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, + {0x00016448, 0x66480001, 0x66480001, 0x66480001, 0x66480001}, {0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, {0x00016844, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, - {0x00016848, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, + {0x00016848, 0x66480001, 0x66480001, 0x66480001, 0x66480001}, {0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, }; -- cgit v0.10.2 From 9495b31ad7e2b479501abb36a62789d59ee406fc Mon Sep 17 00:00:00 2001 From: Yuanhan Liu Date: Thu, 18 Oct 2012 18:10:56 +0800 Subject: brcmfmac: fix potential NULL dereference Fix a samtch warnings catched by Fengguang's 0-DAY system: + drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:3572 brcmf_cfg80211_sched_scan_start() error: we previously assumed 'request' could be null (see line 3571) Cc: John W. Linville Signed-off-by: Yuanhan Liu Acked-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 411dfe7..a6f1e81 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3569,7 +3569,7 @@ brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy, if (!request || !request->n_ssids || !request->n_match_sets) { WL_ERR("Invalid sched scan req!! n_ssids:%d\n", - request->n_ssids); + request ? request->n_ssids : 0); return -EINVAL; } -- cgit v0.10.2 From dcd5c79c9a3a7ac08bdce089fec810677ce6efe8 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Fri, 19 Oct 2012 19:01:59 -0700 Subject: mwifiex: return -EBUSY if specific scan request cannot be honored Previous patch "mwifiex: return -EBUSY if scan request cannot.." corrected regular scan request only. There is another case for specific scan that needs the same handling. Also, removed !req_ssid check as it has already been validated by caller. Signed-off-by: Bing Zhao Signed-off-by: Paul Stewart Reviewed-by: Ryan Cairns Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index 00b658d..9171aae 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1843,21 +1843,18 @@ static int mwifiex_scan_specific_ssid(struct mwifiex_private *priv, struct cfg80211_ssid *req_ssid) { struct mwifiex_adapter *adapter = priv->adapter; - int ret = 0; + int ret; struct mwifiex_user_scan_cfg *scan_cfg; - if (!req_ssid) - return -1; - if (adapter->scan_processing) { - dev_dbg(adapter->dev, "cmd: Scan already in process...\n"); - return ret; + dev_err(adapter->dev, "cmd: Scan already in process...\n"); + return -EBUSY; } if (priv->scan_block) { - dev_dbg(adapter->dev, + dev_err(adapter->dev, "cmd: Scan is blocked during association...\n"); - return ret; + return -EBUSY; } scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL); -- cgit v0.10.2 From 6fcf2b10533bf51c67f0286ddba16e958e7ed972 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Fri, 19 Oct 2012 19:02:00 -0700 Subject: mwifiex: clean up scan state on error De-reference and deallocate scan state on failure. Signed-off-by: Bing Zhao Signed-off-by: Paul Stewart Tested-by: Paul Stewart Reviewed-by: Ryan Cairns Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 0679458..780d3e1 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1825,8 +1825,6 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy, return -EBUSY; } - priv->scan_request = request; - priv->user_scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL); if (!priv->user_scan_cfg) { @@ -1834,6 +1832,8 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy, return -ENOMEM; } + priv->scan_request = request; + priv->user_scan_cfg->num_ssids = request->n_ssids; priv->user_scan_cfg->ssid_list = request->ssids; @@ -1870,6 +1870,9 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy, ret = mwifiex_scan_networks(priv, priv->user_scan_cfg); if (ret) { dev_err(priv->adapter->dev, "scan failed: %d\n", ret); + priv->scan_request = NULL; + kfree(priv->user_scan_cfg); + priv->user_scan_cfg = NULL; return ret; } -- cgit v0.10.2 From f89ff6441df06abc2d95f3ef67525923032d6283 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 24 Oct 2012 08:57:16 -0500 Subject: b43: Fix oops on unload when firmware not found When b43 fails to find firmware when loaded, a subsequent unload will oops due to calling ieee80211_unregister_hw() when the corresponding register call was never made. Commit 2d838bb608e2d1f6cb4280e76748cb812dc822e7 fixed the same problem for b43legacy. Signed-off-by: Larry Finger Tested-by: Markus Kanet Cc: Stable [V3.3.0+ (the patch will need to be refactored)] Cc: Markus Kanet Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 73730e9..c5a99c8 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -5404,6 +5404,8 @@ static void b43_bcma_remove(struct bcma_device *core) cancel_work_sync(&wldev->restart_work); B43_WARN_ON(!wl); + if (!wldev->fw.ucode.data) + return; /* NULL if firmware never loaded */ if (wl->current_dev == wldev && wl->hw_registred) { b43_leds_stop(wldev); ieee80211_unregister_hw(wl->hw); @@ -5478,6 +5480,8 @@ static void b43_ssb_remove(struct ssb_device *sdev) cancel_work_sync(&wldev->restart_work); B43_WARN_ON(!wl); + if (!wldev->fw.ucode.data) + return; /* NULL if firmware never loaded */ if (wl->current_dev == wldev && wl->hw_registred) { b43_leds_stop(wldev); ieee80211_unregister_hw(wl->hw); -- cgit v0.10.2 From a2fc66ce9f4669daeebc03d6891917b894c752a8 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Tue, 23 Oct 2012 04:54:34 +0000 Subject: pch_gbe: fix error handling in pch_gbe_up() If we fail to allocate rx buffers pool by any reason, we'll just return with an error, however we've previously successfully requested an irq. Fix this by releasing the irq before returning the error. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index a8854d0..4c4fe5b 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -1930,12 +1930,12 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter) struct net_device *netdev = adapter->netdev; struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring; struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring; - int err; + int err = -EINVAL; /* Ensure we have a valid MAC */ if (!is_valid_ether_addr(adapter->hw.mac.addr)) { pr_err("Error: Invalid MAC address\n"); - return -EINVAL; + goto out; } /* hardware has been reset, we need to reload some things */ @@ -1948,13 +1948,13 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter) err = pch_gbe_request_irq(adapter); if (err) { - pr_err("Error: can't bring device up\n"); - return err; + pr_err("Error: can't bring device up - irq request failed\n"); + goto out; } err = pch_gbe_alloc_rx_buffers_pool(adapter, rx_ring, rx_ring->count); if (err) { - pr_err("Error: can't bring device up\n"); - return err; + pr_err("Error: can't bring device up - alloc rx buffers pool failed\n"); + goto freeirq; } pch_gbe_alloc_tx_buffers(adapter, tx_ring); pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count); @@ -1969,6 +1969,11 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter) netif_start_queue(adapter->netdev); return 0; + +freeirq: + pch_gbe_free_irq(adapter); +out: + return err; } /** -- cgit v0.10.2 From b2b3392cfc0f5af0f621b3d95aba459f2d5c0e28 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Tue, 23 Oct 2012 12:11:55 +0000 Subject: NET_VENDOR_TI: make available for am33xx as well The cpsw/davinci mdio ip cores are present on am33xx, so make NET_VENDOR_TI visible for it as well. Signed-off-by: Peter Korsgaard Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig index b26cbda..2c41894 100644 --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -5,7 +5,7 @@ config NET_VENDOR_TI bool "Texas Instruments (TI) devices" default y - depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3)) + depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX)) ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from -- cgit v0.10.2 From 14edd87dc67311556f1254a8f29cf4dd6cb5b7d1 Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Wed, 24 Oct 2012 14:01:18 +0800 Subject: ipv6: Set default hoplimit as zero. Commit a02e4b7dae4551(Demark default hoplimit as zero) only changes the hoplimit checking condition and default value in ip6_dst_hoplimit, not zeros all hoplimit default value. Keep the zeroing ip6_template_metrics[RTAX_HOPLIMIT - 1] to force it as const, cause as a37e6e344910(net: force dst_default_metrics to const section) Signed-off-by: Li RongQing Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 7c7e963..b1e6cf0 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -219,7 +219,7 @@ static struct dst_ops ip6_dst_blackhole_ops = { }; static const u32 ip6_template_metrics[RTAX_MAX] = { - [RTAX_HOPLIMIT - 1] = 255, + [RTAX_HOPLIMIT - 1] = 0, }; static const struct rt6_info ip6_null_entry_template = { @@ -1232,7 +1232,7 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev, rt->rt6i_dst.addr = fl6->daddr; rt->rt6i_dst.plen = 128; rt->rt6i_idev = idev; - dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255); + dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 0); spin_lock_bh(&icmp6_dst_lock); rt->dst.next = icmp6_dst_gc_list; -- cgit v0.10.2 From 2b9c128e9580e79db48bd3aacb2b4873544e01e8 Mon Sep 17 00:00:00 2001 From: Wei Yang Date: Wed, 24 Oct 2012 05:21:36 +0000 Subject: gianfar_ptp: use iomem, not ioports resource tree in probe When using a 36 bit dtb file, the driver complains "resource busy". Investigating the source of the message leads one to the gianfar_ptp_probe function. Since the type of the device resource requested in this function is IORESOURCE_MEM, it should use "iomem_resource" instead of "ioports_resource". Signed-off-by: Wei Yang Cc: Claudiu Manoil Cc: Timur Tabi Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index b9db0e0..2e5daee 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -478,7 +478,7 @@ static int gianfar_ptp_probe(struct platform_device *dev) pr_err("no resource\n"); goto no_resource; } - if (request_resource(&ioport_resource, etsects->rsrc)) { + if (request_resource(&iomem_resource, etsects->rsrc)) { pr_err("resource busy\n"); goto no_resource; } -- cgit v0.10.2 From 910a578f7e9400a78a3b13aba0b4d2df16a2cb05 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 24 Oct 2012 20:37:51 +0200 Subject: vhost: fix mergeable bufs on BE hosts We copy head count to a 16 bit field, this works by chance on LE but on BE guest gets 0. Fix it up. Signed-off-by: Michael S. Tsirkin Tested-by: Alexander Graf Cc: stable@vger.kernel.org Signed-off-by: David S. Miller diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 072cbba..7f93f34 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -379,7 +379,8 @@ static void handle_rx(struct vhost_net *net) .hdr.gso_type = VIRTIO_NET_HDR_GSO_NONE }; size_t total_len = 0; - int err, headcount, mergeable; + int err, mergeable; + s16 headcount; size_t vhost_hlen, sock_hlen; size_t vhost_len, sock_len; /* TODO: check that we are running from vhost_worker? */ -- cgit v0.10.2 From c6fdd8e5d0c65bb8821dc6da26ee1a2ddd58b3cc Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Wed, 24 Oct 2012 08:44:32 +0000 Subject: bas_gigaset: fix pre_reset handling The delayed work function int_in_work() may call usb_reset_device() and thus, indirectly, the driver's pre_reset method. Trying to cancel the work synchronously in that situation would deadlock. Fix by avoiding cancel_work_sync() in the pre_reset method. If the reset was NOT initiated by int_in_work() this might cause int_in_work() to run after the post_reset method, with urb_int_in already resubmitted, so handle that case gracefully. Signed-off-by: Tilman Schmidt Signed-off-by: David S. Miller diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c index 5275887..c44950d 100644 --- a/drivers/isdn/gigaset/bas-gigaset.c +++ b/drivers/isdn/gigaset/bas-gigaset.c @@ -617,7 +617,13 @@ static void int_in_work(struct work_struct *work) if (rc == 0) /* success, resubmit interrupt read URB */ rc = usb_submit_urb(urb, GFP_ATOMIC); - if (rc != 0 && rc != -ENODEV) { + + switch (rc) { + case 0: /* success */ + case -ENODEV: /* device gone */ + case -EINVAL: /* URB already resubmitted, or terminal badness */ + break; + default: /* failure: try to recover by resetting the device */ dev_err(cs->dev, "clear halt failed: %s\n", get_usb_rcmsg(rc)); rc = usb_lock_device_for_reset(ucs->udev, ucs->interface); if (rc == 0) { @@ -2442,7 +2448,9 @@ static void gigaset_disconnect(struct usb_interface *interface) } /* gigaset_suspend - * This function is called before the USB connection is suspended. + * This function is called before the USB connection is suspended + * or before the USB device is reset. + * In the latter case, message == PMSG_ON. */ static int gigaset_suspend(struct usb_interface *intf, pm_message_t message) { @@ -2498,7 +2506,12 @@ static int gigaset_suspend(struct usb_interface *intf, pm_message_t message) del_timer_sync(&ucs->timer_atrdy); del_timer_sync(&ucs->timer_cmd_in); del_timer_sync(&ucs->timer_int_in); - cancel_work_sync(&ucs->int_in_wq); + + /* don't try to cancel int_in_wq from within reset as it + * might be the one requesting the reset + */ + if (message.event != PM_EVENT_ON) + cancel_work_sync(&ucs->int_in_wq); gig_dbg(DEBUG_SUSPEND, "suspend complete"); return 0; -- cgit v0.10.2 From 7208ca300725ebc1dd4c60511ed67a69c684eb91 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Thu, 25 Oct 2012 01:12:47 +0000 Subject: net/mlx4_en: Fix double-release-range in tx-rings The QP range is reserved as a single block. However, when freeing the en resources, the tx-ring QPs are released both in mlx4_en_destroy_tx_ring (one at a time) and in mlx4_en_free_resources (as a block release). Fix by eliminating the one-at-a-time release in mlx4_en_destroy_tx_ring. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index c10e3a6..0a51095 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -143,7 +143,6 @@ void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv, mlx4_bf_free(mdev->dev, &ring->bf); mlx4_qp_remove(mdev->dev, &ring->qp); mlx4_qp_free(mdev->dev, &ring->qp); - mlx4_qp_release_range(mdev->dev, ring->qpn, 1); mlx4_en_unmap_buffer(&ring->wqres.buf); mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size); kfree(ring->bounce_buf); -- cgit v0.10.2 From 2b39a06198a0fbaf44a69f435c5d2b4280a0c10e Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Thu, 25 Oct 2012 01:12:48 +0000 Subject: net/mlx4_en: Don't use vlan tag value as an indication for vlan presence The vlan tag can be zero. This is why it can't serve as an indication that packet requires VLAN header in the TX flow. Signed-off-by: Moni Shoua Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 0a51095..b35094c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -711,7 +711,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) if (bounce) tx_desc = mlx4_en_bounce_to_desc(priv, ring, index, desc_size); - if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tag) { + if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tx_tag_present(skb)) { *(__be32 *) (&tx_desc->ctrl.vlan_tag) |= cpu_to_be32(ring->doorbell_qpn); op_own |= htonl((bf_index & 0xffff) << 8); /* Ensure new descirptor hits memory -- cgit v0.10.2 From bfc0d8c3de31a51e671e2c1564fd194fa6b00179 Mon Sep 17 00:00:00 2001 From: Dotan Barak Date: Thu, 25 Oct 2012 01:12:49 +0000 Subject: net/mlx4_core: Unmap UAR also in the case of error flow If a failure takes place during the EQ creation, we need to unmap the UAR memory block too. Signed-off-by: Dotan Barak Signed-off-by: Uri Habusha Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index 51c7649..083767b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -843,6 +843,18 @@ static void __iomem *mlx4_get_eq_uar(struct mlx4_dev *dev, struct mlx4_eq *eq) return priv->eq_table.uar_map[index] + 0x800 + 8 * (eq->eqn % 4); } +static void mlx4_unmap_uar(struct mlx4_dev *dev) +{ + struct mlx4_priv *priv = mlx4_priv(dev); + int i; + + for (i = 0; i < mlx4_num_eq_uar(dev); ++i) + if (priv->eq_table.uar_map[i]) { + iounmap(priv->eq_table.uar_map[i]); + priv->eq_table.uar_map[i] = NULL; + } +} + static int mlx4_create_eq(struct mlx4_dev *dev, int nent, u8 intr, struct mlx4_eq *eq) { @@ -1207,6 +1219,7 @@ err_out_unmap: mlx4_free_irqs(dev); err_out_bitmap: + mlx4_unmap_uar(dev); mlx4_bitmap_cleanup(&priv->eq_table.bitmap); err_out_free: @@ -1231,10 +1244,7 @@ void mlx4_cleanup_eq_table(struct mlx4_dev *dev) if (!mlx4_is_slave(dev)) mlx4_unmap_clr_int(dev); - for (i = 0; i < mlx4_num_eq_uar(dev); ++i) - if (priv->eq_table.uar_map[i]) - iounmap(priv->eq_table.uar_map[i]); - + mlx4_unmap_uar(dev); mlx4_bitmap_cleanup(&priv->eq_table.bitmap); kfree(priv->eq_table.uar_map); -- cgit v0.10.2 From 39707c2a3ba5011038b363f84d37c8a98d2d9db1 Mon Sep 17 00:00:00 2001 From: Hemant Kumar Date: Thu, 25 Oct 2012 18:17:54 +0000 Subject: net: usb: Fix memory leak on Tx data path Driver anchors the tx urbs and defers the urb submission if a transmit request comes when the interface is suspended. Anchoring urb increments the urb reference count. These deferred urbs are later accessed by calling usb_get_from_anchor() for submission during interface resume. usb_get_from_anchor() unanchors the urb but urb reference count remains same. This causes the urb reference count to remain non-zero after usb_free_urb() gets called and urb never gets freed. Hence call usb_put_urb() after anchoring the urb to properly balance the reference count for these deferred urbs. Also, unanchor these deferred urbs during disconnect, to free them up. Signed-off-by: Hemant Kumar Acked-by: Oliver Neukum Signed-off-by: David S. Miller diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index f9819d1..cb04f90 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1158,6 +1158,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, usb_anchor_urb(urb, &dev->deferred); /* no use to process more packets */ netif_stop_queue(net); + usb_put_urb(urb); spin_unlock_irqrestore(&dev->txq.lock, flags); netdev_dbg(dev->net, "Delaying transmission for resumption\n"); goto deferred; @@ -1310,6 +1311,8 @@ void usbnet_disconnect (struct usb_interface *intf) cancel_work_sync(&dev->kevent); + usb_scuttle_anchored_urbs(&dev->deferred); + if (dev->driver_info->unbind) dev->driver_info->unbind (dev, intf); -- cgit v0.10.2 From f8295ec22cb0f1ee6849b862addbfa3ea9320755 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 24 Oct 2012 12:10:34 +0000 Subject: qmi_wwan/cdc_ether: move Novatel 551 and E362 to qmi_wwan MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit These devices provide QMI and ethernet functionality via a standard CDC ethernet descriptor. But when driven by cdc_ether, the QMI functionality is unavailable because only cdc_ether can claim the USB interface. Thus blacklist the devices in cdc_ether and add their IDs to qmi_wwan, which enables both QMI and ethernet simultaneously. Signed-off-by: Dan Williams Cc: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman Acked-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index a03de71..d012982 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -592,6 +592,32 @@ static const struct usb_device_id products [] = { .driver_info = 0, }, +/* Novatel USB551L and MC551 - handled by qmi_wwan */ +{ + .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = NOVATEL_VENDOR_ID, + .idProduct = 0xB001, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .driver_info = 0, +}, + +/* Novatel E362 - handled by qmi_wwan */ +{ + .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = NOVATEL_VENDOR_ID, + .idProduct = 0x9010, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .driver_info = 0, +}, + /* * WHITELIST!!! * @@ -604,21 +630,6 @@ static const struct usb_device_id products [] = { * because of bugs/quirks in a given product (like Zaurus, above). */ { - /* Novatel USB551L */ - /* This match must come *before* the generic CDC-ETHER match so that - * we get FLAG_WWAN set on the device, since it's descriptors are - * generic CDC-ETHER. - */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR - | USB_DEVICE_ID_MATCH_PRODUCT - | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = NOVATEL_VENDOR_ID, - .idProduct = 0xB001, - .bInterfaceClass = USB_CLASS_COMM, - .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, - .bInterfaceProtocol = USB_CDC_PROTO_NONE, - .driver_info = (unsigned long)&wwan_info, -}, { /* ZTE (Vodafone) K3805-Z */ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 9d23ba2..3b566fa 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -369,6 +369,20 @@ static const struct usb_device_id products[] = { USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff), .driver_info = (unsigned long)&qmi_wwan_info, }, + { /* Novatel USB551L and MC551 */ + USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* Novatel E362 */ + USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&qmi_wwan_info, + }, /* 3. Combined interface devices matching on interface number */ {QMI_FIXED_INTF(0x19d2, 0x0002, 1)}, -- cgit v0.10.2 From 3da3fff8006c608f19a51859d44ba47ca8b41461 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 25 Oct 2012 07:25:20 +0000 Subject: tilegx: fix some issues in the SW TSO support This change correctly computes the header length and data length in the fragments to avoid a bug where we would end up with extremely slow performance. Also adopt use of skb_frag_size() accessor. Signed-off-by: Chris Metcalf Cc: stable@vger.kernel.org [v3.6] Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c index 4e2a162..4e98100 100644 --- a/drivers/net/ethernet/tile/tilegx.c +++ b/drivers/net/ethernet/tile/tilegx.c @@ -1334,11 +1334,11 @@ static int tso_count_edescs(struct sk_buff *skb) { struct skb_shared_info *sh = skb_shinfo(skb); unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - unsigned int data_len = skb->data_len + skb->hdr_len - sh_len; + unsigned int data_len = skb->len - sh_len; unsigned int p_len = sh->gso_size; long f_id = -1; /* id of the current fragment */ - long f_size = skb->hdr_len; /* size of the current fragment */ - long f_used = sh_len; /* bytes used from the current fragment */ + long f_size = skb_headlen(skb) - sh_len; /* current fragment size */ + long f_used = 0; /* bytes used from the current fragment */ long n; /* size of the current piece of payload */ int num_edescs = 0; int segment; @@ -1353,7 +1353,7 @@ static int tso_count_edescs(struct sk_buff *skb) /* Advance as needed. */ while (f_used >= f_size) { f_id++; - f_size = sh->frags[f_id].size; + f_size = skb_frag_size(&sh->frags[f_id]); f_used = 0; } @@ -1384,13 +1384,13 @@ static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers, struct iphdr *ih; struct tcphdr *th; unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - unsigned int data_len = skb->data_len + skb->hdr_len - sh_len; + unsigned int data_len = skb->len - sh_len; unsigned char *data = skb->data; unsigned int ih_off, th_off, p_len; unsigned int isum_seed, tsum_seed, id, seq; long f_id = -1; /* id of the current fragment */ - long f_size = skb->hdr_len; /* size of the current fragment */ - long f_used = sh_len; /* bytes used from the current fragment */ + long f_size = skb_headlen(skb) - sh_len; /* current fragment size */ + long f_used = 0; /* bytes used from the current fragment */ long n; /* size of the current piece of payload */ int segment; @@ -1405,7 +1405,7 @@ static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers, isum_seed = ((0xFFFF - ih->check) + (0xFFFF - ih->tot_len) + (0xFFFF - ih->id)); - tsum_seed = th->check + (0xFFFF ^ htons(sh_len + data_len)); + tsum_seed = th->check + (0xFFFF ^ htons(skb->len)); id = ntohs(ih->id); seq = ntohl(th->seq); @@ -1444,7 +1444,7 @@ static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers, /* Advance as needed. */ while (f_used >= f_size) { f_id++; - f_size = sh->frags[f_id].size; + f_size = skb_frag_size(&sh->frags[f_id]); f_used = 0; } @@ -1478,14 +1478,14 @@ static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue, struct tile_net_priv *priv = netdev_priv(dev); struct skb_shared_info *sh = skb_shinfo(skb); unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - unsigned int data_len = skb->data_len + skb->hdr_len - sh_len; + unsigned int data_len = skb->len - sh_len; unsigned int p_len = sh->gso_size; gxio_mpipe_edesc_t edesc_head = { { 0 } }; gxio_mpipe_edesc_t edesc_body = { { 0 } }; long f_id = -1; /* id of the current fragment */ - long f_size = skb->hdr_len; /* size of the current fragment */ - long f_used = sh_len; /* bytes used from the current fragment */ - void *f_data = skb->data; + long f_size = skb_headlen(skb) - sh_len; /* current fragment size */ + long f_used = 0; /* bytes used from the current fragment */ + void *f_data = skb->data + sh_len; long n; /* size of the current piece of payload */ unsigned long tx_packets = 0, tx_bytes = 0; unsigned int csum_start; @@ -1516,15 +1516,18 @@ static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue, /* Egress the payload. */ while (p_used < p_len) { + void *va; /* Advance as needed. */ while (f_used >= f_size) { f_id++; - f_size = sh->frags[f_id].size; - f_used = 0; + f_size = skb_frag_size(&sh->frags[f_id]); f_data = tile_net_frag_buf(&sh->frags[f_id]); + f_used = 0; } + va = f_data + f_used; + /* Use bytes from the current fragment. */ n = p_len - p_used; if (n > f_size - f_used) @@ -1533,7 +1536,7 @@ static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue, p_used += n; /* Egress a piece of the payload. */ - edesc_body.va = va_to_tile_io_addr(f_data) + f_used; + edesc_body.va = va_to_tile_io_addr(va); edesc_body.xfer_size = n; edesc_body.bound = !(p_used < p_len); gxio_mpipe_equeue_put_at(equeue, edesc_body, slot); -- cgit v0.10.2