From 55aa4e0f16aa55e4b8cbe40b11e09cf029848f02 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 25 May 2009 21:28:47 +0200 Subject: ath5k: avoid leaking mutex in ath5k_config Reported-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index fb51937..dd6dc8d 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2779,7 +2779,7 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) ret = ath5k_chan_set(sc, conf->channel); if (ret < 0) - return ret; + goto unlock; if ((changed & IEEE80211_CONF_CHANGE_POWER) && (sc->power_level != conf->power_level)) { @@ -2808,8 +2808,9 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) */ ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT); +unlock: mutex_unlock(&sc->lock); - return 0; + return ret; } #define SUPPORTED_FIF_FLAGS \ -- cgit v0.10.2 From f488b72de5bb2f380c157135922bac3ca1648564 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 22 May 2009 21:19:40 +0200 Subject: net/libertas: make SPI interface big endian aware The comment (which I remove) says that the translation is done SPI routines. IMHO this can't work because the SPI driver does not know whether the incomming bytes are part of the registers/bytes which need to be flipped or part of packet data which has to remain untouched. While adding le helpers I also removed spu_write_u32() which has no users. Tested-by: Andrey Yurovsky Signed-off-by: Sebastian Andrzej Siewior Acked-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index 5fa55fe..ea23c5d 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -119,9 +119,6 @@ static struct chip_ident chip_id_to_device_name[] = { * First we have to put a SPU register name on the bus. Then we can * either read from or write to that register. * - * For 16-bit transactions, byte order on the bus is big-endian. - * We don't have to worry about that here, though. - * The translation takes place in the SPI routines. */ static void spu_transaction_init(struct if_spi_card *card) @@ -147,7 +144,7 @@ static void spu_transaction_finish(struct if_spi_card *card) static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len) { int err = 0; - u16 reg_out = reg | IF_SPI_WRITE_OPERATION_MASK; + u16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK); /* You must give an even number of bytes to the SPU, even if it * doesn't care about the last one. */ @@ -169,16 +166,10 @@ out: static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val) { - return spu_write(card, reg, (u8 *)&val, sizeof(u16)); -} + u16 buff; -static inline int spu_write_u32(struct if_spi_card *card, u16 reg, u32 val) -{ - /* The lower 16 bits are written first. */ - u16 out[2]; - out[0] = val & 0xffff; - out[1] = (val & 0xffff0000) >> 16; - return spu_write(card, reg, (u8 *)&out, sizeof(u32)); + buff = cpu_to_le16(val); + return spu_write(card, reg, (u8 *)&buff, sizeof(u16)); } static inline int spu_reg_is_port_reg(u16 reg) @@ -198,7 +189,7 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len) unsigned int i, delay; int err = 0; u16 zero = 0; - u16 reg_out = reg | IF_SPI_READ_OPERATION_MASK; + u16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK); /* You must take an even number of bytes from the SPU, even if you * don't care about the last one. */ @@ -236,18 +227,25 @@ out: /* Read 16 bits from an SPI register */ static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val) { - return spu_read(card, reg, (u8 *)val, sizeof(u16)); + u16 buf; + int ret; + + ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf)); + if (ret == 0) + *val = le16_to_cpup(&buf); + return ret; } /* Read 32 bits from an SPI register. * The low 16 bits are read first. */ static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val) { - u16 buf[2]; + u32 buf; int err; - err = spu_read(card, reg, (u8 *)buf, sizeof(u32)); + + err = spu_read(card, reg, (u8 *)&buf, sizeof(buf)); if (!err) - *val = buf[0] | (buf[1] << 16); + *val = le32_to_cpup(&buf); return err; } -- cgit v0.10.2 From ce2ebc9b8ddac020aa06c83a6d084c34017d835d Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 22 May 2009 21:33:21 +0200 Subject: rt2x00: Add new rt2800usb USB ID's new patch to add more usb_dev to rt2800usb.c . IDs 'stolen' from the latest Ralink linux driver(2009_0520_RT3070_Linux_STA_v2.1.1.0.tar.gz) Signed-off-by: Xose Vazquez Perez Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 142ad34..3756166 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -2927,12 +2927,17 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x07d1, 0x3c0a), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x07d1, 0x3c0b), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c0d), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c0e), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c0f), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Edimax */ { USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Encore */ + { USB_DEVICE(0x203d, 0x1480), USB_DEVICE_DATA(&rt2800usb_ops) }, /* EnGenius */ { USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -2951,6 +2956,8 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* I-O DATA */ + { USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) }, /* LevelOne */ { USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -2970,6 +2977,7 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Pegatron */ { USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Philips */ { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Planex */ @@ -2981,6 +2989,7 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Quanta */ { USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Ralink */ + { USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -3005,6 +3014,7 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) }, /* SMC */ { USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -3029,6 +3039,8 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Zinwell */ { USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Zyxel */ { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0586, 0x341a), USB_DEVICE_DATA(&rt2800usb_ops) }, -- cgit v0.10.2 From df29ff379425954cb74b7beb642ca5b43ae557ae Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Fri, 22 May 2009 14:37:54 -0700 Subject: iwlwifi: fix merge error This hunk of code was removed in patch "iwlwifi: do not cancel delayed work inside spin_lock_irqsave" submitted at http://marc.info/?l=linux-wireless&m=124267503030042&w=2 This same patch in this repo does not remove this hunk. Remove it here. Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index e93ddb7..a9da06f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2685,13 +2685,6 @@ int iwl_set_mode(struct iwl_priv *priv, int mode) if (!iwl_is_ready_rf(priv)) return -EAGAIN; - cancel_delayed_work(&priv->scan_check); - if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); - IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); - return -EAGAIN; - } - iwlcore_commit_rxon(priv); return 0; -- cgit v0.10.2 From d77b034f62d4b8c6c39450d99de224b9b2c5debb Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Fri, 22 May 2009 14:37:55 -0700 Subject: iwlwifi: fix otp access init Polling function returns positive time if polling was needed to read value. This is still success. Signed-off-by: Reinette Chatre CC: Wey-Yi Guy Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index cefa501..7d7554a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -240,13 +240,11 @@ static int iwl_init_otp_access(struct iwl_priv *priv) if (ret < 0) IWL_ERR(priv, "Time out access OTP\n"); else { - if (!ret) { - iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_RESET_REQ); - udelay(5); - iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_RESET_REQ); - } + iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_RESET_REQ); + udelay(5); + iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_RESET_REQ); } return ret; } -- cgit v0.10.2 From 5fd164e96cb9dc111f75468378de38c67b0fd161 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 22 May 2009 20:01:21 -0400 Subject: libertas: simplify and clean up association/start/join setup Some of the parameters for association/join/start commands aren't used (like the FH and CF IEs for IBSS, and the FH IE for BSS), so get rid of their unions to reduce indirection. Also clean up structure names for kernel style. Signed-off-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c index a0e440c..d4d1d80 100644 --- a/drivers/net/wireless/libertas/assoc.c +++ b/drivers/net/wireless/libertas/assoc.c @@ -219,11 +219,10 @@ static int lbs_adhoc_join(struct lbs_private *priv, memcpy(&cmd.bss.bssid, &bss->bssid, ETH_ALEN); memcpy(&cmd.bss.ssid, &bss->ssid, bss->ssid_len); - memcpy(&cmd.bss.phyparamset, &bss->phyparamset, - sizeof(union ieeetypes_phyparamset)); + memcpy(&cmd.bss.ds, &bss->phy.ds, sizeof(struct ieee_ie_ds_param_set)); - memcpy(&cmd.bss.ssparamset, &bss->ssparamset, - sizeof(union IEEEtypes_ssparamset)); + memcpy(&cmd.bss.ibss, &bss->ss.ibss, + sizeof(struct ieee_ie_ibss_param_set)); cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK); lbs_deb_join("ADHOC_J_CMD: tmpcap=%4X CAPINFO_MASK=%4X\n", @@ -260,7 +259,7 @@ static int lbs_adhoc_join(struct lbs_private *priv, */ lbs_set_basic_rate_flags(cmd.bss.rates, ratesize); - cmd.bss.ssparamset.ibssparamset.atimwindow = cpu_to_le16(bss->atimwindow); + cmd.bss.ibss.atimwindow = bss->atimwindow; if (assoc_req->secinfo.wep_enabled) { u16 tmp = le16_to_cpu(cmd.bss.capability); @@ -343,14 +342,14 @@ static int lbs_adhoc_start(struct lbs_private *priv, WARN_ON(!assoc_req->channel); /* set Physical parameter set */ - cmd.phyparamset.dsparamset.elementid = WLAN_EID_DS_PARAMS; - cmd.phyparamset.dsparamset.len = 1; - cmd.phyparamset.dsparamset.currentchan = assoc_req->channel; + cmd.ds.elementid = WLAN_EID_DS_PARAMS; + cmd.ds.len = 1; + cmd.ds.channel = assoc_req->channel; /* set IBSS parameter set */ - cmd.ssparamset.ibssparamset.elementid = WLAN_EID_IBSS_PARAMS; - cmd.ssparamset.ibssparamset.len = 2; - cmd.ssparamset.ibssparamset.atimwindow = 0; + cmd.ibss.elementid = WLAN_EID_IBSS_PARAMS; + cmd.ibss.len = 2; + cmd.ibss.atimwindow = cpu_to_le16(0); /* set capability info */ tmpcap = WLAN_CAPABILITY_IBSS; @@ -1560,8 +1559,8 @@ int lbs_cmd_80211_associate(struct lbs_private *priv, u8 *pos; u16 tmpcap, tmplen; struct mrvlietypes_ssidparamset *ssid; - struct mrvlietypes_phyparamset *phy; - struct mrvlietypes_ssparamset *ss; + struct mrvlietypes_dsparamset *ds; + struct mrvlietypes_cfparamset *cf; struct mrvlietypes_ratesparamset *rates; struct mrvlietypes_rsnparamset *rsn; @@ -1594,20 +1593,18 @@ int lbs_cmd_80211_associate(struct lbs_private *priv, memcpy(ssid->ssid, bss->ssid, tmplen); pos += sizeof(ssid->header) + tmplen; - phy = (struct mrvlietypes_phyparamset *) pos; - phy->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); - tmplen = sizeof(phy->fh_ds.dsparamset); - phy->header.len = cpu_to_le16(tmplen); - memcpy(&phy->fh_ds.dsparamset, - &bss->phyparamset.dsparamset.currentchan, - tmplen); - pos += sizeof(phy->header) + tmplen; - - ss = (struct mrvlietypes_ssparamset *) pos; - ss->header.type = cpu_to_le16(TLV_TYPE_CF); - tmplen = sizeof(ss->cf_ibss.cfparamset); - ss->header.len = cpu_to_le16(tmplen); - pos += sizeof(ss->header) + tmplen; + ds = (struct mrvlietypes_dsparamset *) pos; + ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); + ds->header.len = cpu_to_le16(1); + ds->channel = bss->phy.ds.channel; + pos += sizeof(ds->header) + 1; + + cf = (struct mrvlietypes_cfparamset *) pos; + cf->header.type = cpu_to_le16(TLV_TYPE_CF); + tmplen = sizeof(*cf) - sizeof (cf->header); + cf->header.len = cpu_to_le16(tmplen); + /* IE payload should be zeroed, firmware fills it in for us */ + pos += sizeof(*cf); rates = (struct mrvlietypes_ratesparamset *) pos; rates->header.type = cpu_to_le16(TLV_TYPE_RATES); @@ -1643,7 +1640,7 @@ int lbs_cmd_80211_associate(struct lbs_private *priv, } /* update curbssparams */ - priv->curbssparams.channel = bss->phyparamset.dsparamset.currentchan; + priv->curbssparams.channel = bss->phy.ds.channel; if (lbs_parse_dnld_countryinfo_11d(priv, bss)) { ret = -1; @@ -1669,7 +1666,7 @@ int lbs_ret_80211_associate(struct lbs_private *priv, { int ret = 0; union iwreq_data wrqu; - struct ieeetypes_assocrsp *passocrsp; + struct ieee_assoc_response *passocrsp; struct bss_descriptor *bss; u16 status_code; @@ -1682,7 +1679,7 @@ int lbs_ret_80211_associate(struct lbs_private *priv, } bss = &priv->in_progress_assoc_req->bss; - passocrsp = (struct ieeetypes_assocrsp *) &resp->params; + passocrsp = (struct ieee_assoc_response *) &resp->params; /* * Older FW versions map the IEEE 802.11 Status Code in the association diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index a4455ec..d0de8c7 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -340,7 +340,7 @@ struct bss_descriptor { u32 rssi; u32 channel; u16 beaconperiod; - u32 atimwindow; + __le16 atimwindow; /* IW_MODE_AUTO, IW_MODE_ADHOC, IW_MODE_INFRA */ u8 mode; @@ -350,8 +350,8 @@ struct bss_descriptor { unsigned long last_scanned; - union ieeetypes_phyparamset phyparamset; - union IEEEtypes_ssparamset ssparamset; + union ieee_phy_param_set phy; + union ieee_ss_param_set ss; struct ieeetypes_countryinfofullset countryinfo; diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h index 391c54a..463ff97 100644 --- a/drivers/net/wireless/libertas/hostcmd.h +++ b/drivers/net/wireless/libertas/hostcmd.h @@ -278,7 +278,7 @@ struct cmd_ds_802_11_associate { } __attribute__ ((packed)); struct cmd_ds_802_11_associate_rsp { - struct ieeetypes_assocrsp assocRsp; + struct ieee_assoc_response response; } __attribute__ ((packed)); struct cmd_ds_802_11_set_wep { @@ -535,9 +535,11 @@ struct cmd_ds_802_11_ad_hoc_start { u8 bsstype; __le16 beaconperiod; u8 dtimperiod; /* Reserved on v9 and later */ - union IEEEtypes_ssparamset ssparamset; - union ieeetypes_phyparamset phyparamset; - __le16 probedelay; + struct ieee_ie_ibss_param_set ibss; + u8 reserved1[4]; + struct ieee_ie_ds_param_set ds; + u8 reserved2[4]; + __le16 probedelay; /* Reserved on v9 and later */ __le16 capability; u8 rates[MAX_RATES]; u8 tlv_memory_size_pad[100]; @@ -558,8 +560,10 @@ struct adhoc_bssdesc { u8 dtimperiod; __le64 timestamp; __le64 localtime; - union ieeetypes_phyparamset phyparamset; - union IEEEtypes_ssparamset ssparamset; + struct ieee_ie_ds_param_set ds; + u8 reserved1[4]; + struct ieee_ie_ibss_param_set ibss; + u8 reserved2[4]; __le16 capability; u8 rates[MAX_RATES]; diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index 8124db3..38b0560 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -513,10 +513,10 @@ void lbs_scan_worker(struct work_struct *work) static int lbs_process_bss(struct bss_descriptor *bss, uint8_t **pbeaconinfo, int *bytesleft) { - struct ieeetypes_fhparamset *pFH; - struct ieeetypes_dsparamset *pDS; - struct ieeetypes_cfparamset *pCF; - struct ieeetypes_ibssparamset *pibss; + struct ieee_ie_fh_param_set *fh; + struct ieee_ie_ds_param_set *ds; + struct ieee_ie_cf_param_set *cf; + struct ieee_ie_ibss_param_set *ibss; DECLARE_SSID_BUF(ssid); struct ieeetypes_countryinfoset *pcountryinfo; uint8_t *pos, *end, *p; @@ -616,32 +616,28 @@ static int lbs_process_bss(struct bss_descriptor *bss, break; case WLAN_EID_FH_PARAMS: - pFH = (struct ieeetypes_fhparamset *) pos; - memmove(&bss->phyparamset.fhparamset, pFH, - sizeof(struct ieeetypes_fhparamset)); + fh = (struct ieee_ie_fh_param_set *) pos; + memcpy(&bss->phy.fh, fh, sizeof(*fh)); lbs_deb_scan("got FH IE\n"); break; case WLAN_EID_DS_PARAMS: - pDS = (struct ieeetypes_dsparamset *) pos; - bss->channel = pDS->currentchan; - memcpy(&bss->phyparamset.dsparamset, pDS, - sizeof(struct ieeetypes_dsparamset)); + ds = (struct ieee_ie_ds_param_set *) pos; + bss->channel = ds->channel; + memcpy(&bss->phy.ds, ds, sizeof(*ds)); lbs_deb_scan("got DS IE, channel %d\n", bss->channel); break; case WLAN_EID_CF_PARAMS: - pCF = (struct ieeetypes_cfparamset *) pos; - memcpy(&bss->ssparamset.cfparamset, pCF, - sizeof(struct ieeetypes_cfparamset)); + cf = (struct ieee_ie_cf_param_set *) pos; + memcpy(&bss->ss.cf, cf, sizeof(*cf)); lbs_deb_scan("got CF IE\n"); break; case WLAN_EID_IBSS_PARAMS: - pibss = (struct ieeetypes_ibssparamset *) pos; - bss->atimwindow = le16_to_cpu(pibss->atimwindow); - memmove(&bss->ssparamset.ibssparamset, pibss, - sizeof(struct ieeetypes_ibssparamset)); + ibss = (struct ieee_ie_ibss_param_set *) pos; + bss->atimwindow = ibss->atimwindow; + memcpy(&bss->ss.ibss, ibss, sizeof(*ibss)); lbs_deb_scan("got IBSS IE\n"); break; diff --git a/drivers/net/wireless/libertas/types.h b/drivers/net/wireless/libertas/types.h index de03b9c..b8d2ce9 100644 --- a/drivers/net/wireless/libertas/types.h +++ b/drivers/net/wireless/libertas/types.h @@ -8,7 +8,7 @@ #include #include -struct ieeetypes_cfparamset { +struct ieee_ie_cf_param_set { u8 elementid; u8 len; u8 cfpcnt; @@ -18,18 +18,18 @@ struct ieeetypes_cfparamset { } __attribute__ ((packed)); -struct ieeetypes_ibssparamset { +struct ieee_ie_ibss_param_set { u8 elementid; u8 len; __le16 atimwindow; } __attribute__ ((packed)); -union IEEEtypes_ssparamset { - struct ieeetypes_cfparamset cfparamset; - struct ieeetypes_ibssparamset ibssparamset; +union ieee_ss_param_set { + struct ieee_ie_cf_param_set cf; + struct ieee_ie_ibss_param_set ibss; } __attribute__ ((packed)); -struct ieeetypes_fhparamset { +struct ieee_ie_fh_param_set { u8 elementid; u8 len; __le16 dwelltime; @@ -38,18 +38,18 @@ struct ieeetypes_fhparamset { u8 hopindex; } __attribute__ ((packed)); -struct ieeetypes_dsparamset { +struct ieee_ie_ds_param_set { u8 elementid; u8 len; - u8 currentchan; + u8 channel; } __attribute__ ((packed)); -union ieeetypes_phyparamset { - struct ieeetypes_fhparamset fhparamset; - struct ieeetypes_dsparamset dsparamset; +union ieee_phy_param_set { + struct ieee_ie_fh_param_set fh; + struct ieee_ie_ds_param_set ds; } __attribute__ ((packed)); -struct ieeetypes_assocrsp { +struct ieee_assoc_response { __le16 capability; __le16 statuscode; __le16 aid; @@ -149,42 +149,17 @@ struct mrvlietypes_chanlistparamset { struct chanscanparamset chanscanparam[1]; } __attribute__ ((packed)); -struct cfparamset { +struct mrvlietypes_cfparamset { + struct mrvlietypesheader header; u8 cfpcnt; u8 cfpperiod; __le16 cfpmaxduration; __le16 cfpdurationremaining; } __attribute__ ((packed)); -struct ibssparamset { - __le16 atimwindow; -} __attribute__ ((packed)); - -struct mrvlietypes_ssparamset { - struct mrvlietypesheader header; - union { - struct cfparamset cfparamset[1]; - struct ibssparamset ibssparamset[1]; - } cf_ibss; -} __attribute__ ((packed)); - -struct fhparamset { - __le16 dwelltime; - u8 hopset; - u8 hoppattern; - u8 hopindex; -} __attribute__ ((packed)); - -struct dsparamset { - u8 currentchan; -} __attribute__ ((packed)); - -struct mrvlietypes_phyparamset { +struct mrvlietypes_dsparamset { struct mrvlietypesheader header; - union { - struct fhparamset fhparamset[1]; - struct dsparamset dsparamset[1]; - } fh_ds; + u8 channel; } __attribute__ ((packed)); struct mrvlietypes_rsnparamset { -- cgit v0.10.2 From 75b6a61a47353fd404277ae3f2dda03af96a8c1a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 22 May 2009 20:03:09 -0400 Subject: libertas: restyle Marvell & IEEE TLV structure names Easier to read and more conformant with kernel style. Signed-off-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/11d.c b/drivers/net/wireless/libertas/11d.c index 4bc46a6..9a5408e 100644 --- a/drivers/net/wireless/libertas/11d.c +++ b/drivers/net/wireless/libertas/11d.c @@ -207,7 +207,7 @@ static int generate_domain_info_11d(struct parsed_region_chan_11d lbs_deb_11d("nr_subband=%x\n", domaininfo->nr_subband); lbs_deb_hex(LBS_DEB_11D, "domaininfo", (char *)domaininfo, COUNTRY_CODE_LEN + 1 + - sizeof(struct ieeetypes_subbandset) * nr_subband); + sizeof(struct ieee_subbandset) * nr_subband); return 0; } @@ -302,11 +302,9 @@ done: * @param parsed_region_chan pointer to parsed_region_chan_11d * @return 0 */ -static int parse_domain_info_11d(struct ieeetypes_countryinfofullset* - countryinfo, +static int parse_domain_info_11d(struct ieee_ie_country_info_full_set *countryinfo, u8 band, - struct parsed_region_chan_11d * - parsed_region_chan) + struct parsed_region_chan_11d *parsed_region_chan) { u8 nr_subband, nrchan; u8 lastchan, firstchan; @@ -331,7 +329,7 @@ static int parse_domain_info_11d(struct ieeetypes_countryinfofullset* lbs_deb_hex(LBS_DEB_11D, "countryinfo", (u8 *) countryinfo, 30); if ((*(countryinfo->countrycode)) == 0 - || (countryinfo->len <= COUNTRY_CODE_LEN)) { + || (countryinfo->header.len <= COUNTRY_CODE_LEN)) { /* No region Info or Wrong region info: treat as No 11D info */ goto done; } @@ -349,8 +347,8 @@ static int parse_domain_info_11d(struct ieeetypes_countryinfofullset* memcpy(parsed_region_chan->countrycode, countryinfo->countrycode, COUNTRY_CODE_LEN); - nr_subband = (countryinfo->len - COUNTRY_CODE_LEN) / - sizeof(struct ieeetypes_subbandset); + nr_subband = (countryinfo->header.len - COUNTRY_CODE_LEN) / + sizeof(struct ieee_subbandset); for (j = 0, lastchan = 0; j < nr_subband; j++) { @@ -502,7 +500,7 @@ int lbs_cmd_802_11d_domain_info(struct lbs_private *priv, { struct cmd_ds_802_11d_domain_info *pdomaininfo = &cmd->params.domaininfo; - struct mrvlietypes_domainparamset *domain = &pdomaininfo->domain; + struct mrvl_ie_domain_param_set *domain = &pdomaininfo->domain; u8 nr_subband = priv->domainreg.nr_subband; lbs_deb_enter(LBS_DEB_11D); @@ -524,16 +522,16 @@ int lbs_cmd_802_11d_domain_info(struct lbs_private *priv, sizeof(domain->countrycode)); domain->header.len = - cpu_to_le16(nr_subband * sizeof(struct ieeetypes_subbandset) + + cpu_to_le16(nr_subband * sizeof(struct ieee_subbandset) + sizeof(domain->countrycode)); if (nr_subband) { memcpy(domain->subband, priv->domainreg.subband, - nr_subband * sizeof(struct ieeetypes_subbandset)); + nr_subband * sizeof(struct ieee_subbandset)); cmd->size = cpu_to_le16(sizeof(pdomaininfo->action) + le16_to_cpu(domain->header.len) + - sizeof(struct mrvlietypesheader) + + sizeof(struct mrvl_ie_header) + S_DS_GEN); } else { cmd->size = @@ -556,7 +554,7 @@ done: int lbs_ret_802_11d_domain_info(struct cmd_ds_command *resp) { struct cmd_ds_802_11d_domain_info *domaininfo = &resp->params.domaininforesp; - struct mrvlietypes_domainparamset *domain = &domaininfo->domain; + struct mrvl_ie_domain_param_set *domain = &domaininfo->domain; u16 action = le16_to_cpu(domaininfo->action); s16 ret = 0; u8 nr_subband = 0; @@ -567,7 +565,7 @@ int lbs_ret_802_11d_domain_info(struct cmd_ds_command *resp) (int)le16_to_cpu(resp->size)); nr_subband = (le16_to_cpu(domain->header.len) - COUNTRY_CODE_LEN) / - sizeof(struct ieeetypes_subbandset); + sizeof(struct ieee_subbandset); lbs_deb_11d("domain info resp: nr_subband %d\n", nr_subband); diff --git a/drivers/net/wireless/libertas/11d.h b/drivers/net/wireless/libertas/11d.h index 4f4f47f..fb75d3e 100644 --- a/drivers/net/wireless/libertas/11d.h +++ b/drivers/net/wireless/libertas/11d.h @@ -20,35 +20,36 @@ struct cmd_ds_command; /** Data structure for Country IE*/ -struct ieeetypes_subbandset { +struct ieee_subbandset { u8 firstchan; u8 nrchan; u8 maxtxpwr; } __attribute__ ((packed)); -struct ieeetypes_countryinfoset { - u8 element_id; - u8 len; +struct ieee_ie_country_info_set { + struct ieee_ie_header header; + u8 countrycode[COUNTRY_CODE_LEN]; - struct ieeetypes_subbandset subband[1]; + struct ieee_subbandset subband[1]; }; -struct ieeetypes_countryinfofullset { - u8 element_id; - u8 len; +struct ieee_ie_country_info_full_set { + struct ieee_ie_header header; + u8 countrycode[COUNTRY_CODE_LEN]; - struct ieeetypes_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D]; + struct ieee_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D]; } __attribute__ ((packed)); -struct mrvlietypes_domainparamset { - struct mrvlietypesheader header; +struct mrvl_ie_domain_param_set { + struct mrvl_ie_header header; + u8 countrycode[COUNTRY_CODE_LEN]; - struct ieeetypes_subbandset subband[1]; + struct ieee_subbandset subband[1]; } __attribute__ ((packed)); struct cmd_ds_802_11d_domain_info { __le16 action; - struct mrvlietypes_domainparamset domain; + struct mrvl_ie_domain_param_set domain; } __attribute__ ((packed)); /** domain regulatory information */ @@ -57,7 +58,7 @@ struct lbs_802_11d_domain_reg { u8 countrycode[COUNTRY_CODE_LEN]; /** No. of subband*/ u8 nr_subband; - struct ieeetypes_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D]; + struct ieee_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D]; }; struct chan_power_11d { diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c index d4d1d80..75c67c9 100644 --- a/drivers/net/wireless/libertas/assoc.c +++ b/drivers/net/wireless/libertas/assoc.c @@ -342,13 +342,13 @@ static int lbs_adhoc_start(struct lbs_private *priv, WARN_ON(!assoc_req->channel); /* set Physical parameter set */ - cmd.ds.elementid = WLAN_EID_DS_PARAMS; - cmd.ds.len = 1; + cmd.ds.header.id = WLAN_EID_DS_PARAMS; + cmd.ds.header.len = 1; cmd.ds.channel = assoc_req->channel; /* set IBSS parameter set */ - cmd.ibss.elementid = WLAN_EID_IBSS_PARAMS; - cmd.ibss.len = 2; + cmd.ibss.header.id = WLAN_EID_IBSS_PARAMS; + cmd.ibss.header.len = 2; cmd.ibss.atimwindow = cpu_to_le16(0); /* set capability info */ @@ -1558,11 +1558,11 @@ int lbs_cmd_80211_associate(struct lbs_private *priv, struct bss_descriptor *bss = &assoc_req->bss; u8 *pos; u16 tmpcap, tmplen; - struct mrvlietypes_ssidparamset *ssid; - struct mrvlietypes_dsparamset *ds; - struct mrvlietypes_cfparamset *cf; - struct mrvlietypes_ratesparamset *rates; - struct mrvlietypes_rsnparamset *rsn; + struct mrvl_ie_ssid_param_set *ssid; + struct mrvl_ie_ds_param_set *ds; + struct mrvl_ie_cf_param_set *cf; + struct mrvl_ie_rates_param_set *rates; + struct mrvl_ie_rsn_param_set *rsn; lbs_deb_enter(LBS_DEB_ASSOC); @@ -1586,27 +1586,27 @@ int lbs_cmd_80211_associate(struct lbs_private *priv, pos += sizeof(passo->bcnperiod); pos += sizeof(passo->dtimperiod); - ssid = (struct mrvlietypes_ssidparamset *) pos; + ssid = (struct mrvl_ie_ssid_param_set *) pos; ssid->header.type = cpu_to_le16(TLV_TYPE_SSID); tmplen = bss->ssid_len; ssid->header.len = cpu_to_le16(tmplen); memcpy(ssid->ssid, bss->ssid, tmplen); pos += sizeof(ssid->header) + tmplen; - ds = (struct mrvlietypes_dsparamset *) pos; + ds = (struct mrvl_ie_ds_param_set *) pos; ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); ds->header.len = cpu_to_le16(1); ds->channel = bss->phy.ds.channel; pos += sizeof(ds->header) + 1; - cf = (struct mrvlietypes_cfparamset *) pos; + cf = (struct mrvl_ie_cf_param_set *) pos; cf->header.type = cpu_to_le16(TLV_TYPE_CF); tmplen = sizeof(*cf) - sizeof (cf->header); cf->header.len = cpu_to_le16(tmplen); /* IE payload should be zeroed, firmware fills it in for us */ pos += sizeof(*cf); - rates = (struct mrvlietypes_ratesparamset *) pos; + rates = (struct mrvl_ie_rates_param_set *) pos; rates->header.type = cpu_to_le16(TLV_TYPE_RATES); memcpy(&rates->rates, &bss->rates, MAX_RATES); tmplen = MAX_RATES; @@ -1628,7 +1628,7 @@ int lbs_cmd_80211_associate(struct lbs_private *priv, lbs_set_basic_rate_flags(rates->rates, tmplen); if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) { - rsn = (struct mrvlietypes_rsnparamset *) pos; + rsn = (struct mrvl_ie_rsn_param_set *) pos; /* WPA_IE or WPA2_IE */ rsn->header.type = cpu_to_le16((u16) assoc_req->wpa_ie[0]); tmplen = (u16) assoc_req->wpa_ie[1]; diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index c455b9a..ed079c1 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1470,8 +1470,8 @@ int lbs_prepare_and_send_command(struct lbs_private *priv, break; case CMD_802_11_LED_GPIO_CTRL: { - struct mrvlietypes_ledgpio *gpio = - (struct mrvlietypes_ledgpio*) + struct mrvl_ie_ledgpio *gpio = + (struct mrvl_ie_ledgpio*) cmdptr->params.ledgpio.data; memmove(&cmdptr->params.ledgpio, diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c index 50e28a0..811ffc3 100644 --- a/drivers/net/wireless/libertas/debugfs.c +++ b/drivers/net/wireless/libertas/debugfs.c @@ -183,12 +183,12 @@ out_unlock: */ static void *lbs_tlv_find(uint16_t tlv_type, const uint8_t *tlv, uint16_t size) { - struct mrvlietypesheader *tlv_h; + struct mrvl_ie_header *tlv_h; uint16_t length; ssize_t pos = 0; while (pos < size) { - tlv_h = (struct mrvlietypesheader *) tlv; + tlv_h = (struct mrvl_ie_header *) tlv; if (!tlv_h->len) return NULL; if (tlv_h->type == cpu_to_le16(tlv_type)) @@ -206,7 +206,7 @@ static ssize_t lbs_threshold_read(uint16_t tlv_type, uint16_t event_mask, size_t count, loff_t *ppos) { struct cmd_ds_802_11_subscribe_event *subscribed; - struct mrvlietypes_thresholds *got; + struct mrvl_ie_thresholds *got; struct lbs_private *priv = file->private_data; ssize_t ret = 0; size_t pos = 0; @@ -259,7 +259,7 @@ static ssize_t lbs_threshold_write(uint16_t tlv_type, uint16_t event_mask, loff_t *ppos) { struct cmd_ds_802_11_subscribe_event *events; - struct mrvlietypes_thresholds *tlv; + struct mrvl_ie_thresholds *tlv; struct lbs_private *priv = file->private_data; ssize_t buf_size; int value, freq, new_mask; diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index d0de8c7..9e11f90 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -353,7 +353,7 @@ struct bss_descriptor { union ieee_phy_param_set phy; union ieee_ss_param_set ss; - struct ieeetypes_countryinfofullset countryinfo; + struct ieee_ie_country_info_full_set countryinfo; u8 wpa_ie[MAX_WPA_IE_LEN]; size_t wpa_ie_len; diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index 38b0560..e5e30b2 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -27,12 +27,12 @@ + 40) /* 40 for WPAIE */ //! Memory needed to store a max sized channel List TLV for a firmware scan -#define CHAN_TLV_MAX_SIZE (sizeof(struct mrvlietypesheader) \ +#define CHAN_TLV_MAX_SIZE (sizeof(struct mrvl_ie_header) \ + (MRVDRV_MAX_CHANNELS_PER_SCAN \ * sizeof(struct chanscanparamset))) //! Memory needed to store a max number/size SSID TLV for a firmware scan -#define SSID_TLV_MAX_SIZE (1 * sizeof(struct mrvlietypes_ssidparamset)) +#define SSID_TLV_MAX_SIZE (1 * sizeof(struct mrvl_ie_ssid_param_set)) //! Maximum memory needed for a cmd_ds_802_11_scan with all TLVs at max #define MAX_SCAN_CFG_ALLOC (sizeof(struct cmd_ds_802_11_scan) \ @@ -211,7 +211,7 @@ static int lbs_scan_create_channel_list(struct lbs_private *priv, */ static int lbs_scan_add_ssid_tlv(struct lbs_private *priv, u8 *tlv) { - struct mrvlietypes_ssidparamset *ssid_tlv = (void *)tlv; + struct mrvl_ie_ssid_param_set *ssid_tlv = (void *)tlv; ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID); ssid_tlv->header.len = cpu_to_le16(priv->scan_ssid_len); @@ -249,7 +249,7 @@ static int lbs_scan_add_chanlist_tlv(uint8_t *tlv, int chan_count) { size_t size = sizeof(struct chanscanparamset) *chan_count; - struct mrvlietypes_chanlistparamset *chan_tlv = (void *)tlv; + struct mrvl_ie_chanlist_param_set *chan_tlv = (void *)tlv; chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); memcpy(chan_tlv->chanscanparam, chan_list, size); @@ -270,7 +270,7 @@ static int lbs_scan_add_chanlist_tlv(uint8_t *tlv, static int lbs_scan_add_rates_tlv(uint8_t *tlv) { int i; - struct mrvlietypes_ratesparamset *rate_tlv = (void *)tlv; + struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); tlv += sizeof(rate_tlv->header); @@ -518,7 +518,7 @@ static int lbs_process_bss(struct bss_descriptor *bss, struct ieee_ie_cf_param_set *cf; struct ieee_ie_ibss_param_set *ibss; DECLARE_SSID_BUF(ssid); - struct ieeetypes_countryinfoset *pcountryinfo; + struct ieee_ie_country_info_set *pcountryinfo; uint8_t *pos, *end, *p; uint8_t n_ex_rates = 0, got_basic_rates = 0, n_basic_rates = 0; uint16_t beaconsize = 0; @@ -642,20 +642,23 @@ static int lbs_process_bss(struct bss_descriptor *bss, break; case WLAN_EID_COUNTRY: - pcountryinfo = (struct ieeetypes_countryinfoset *) pos; + pcountryinfo = (struct ieee_ie_country_info_set *) pos; lbs_deb_scan("got COUNTRY IE\n"); - if (pcountryinfo->len < sizeof(pcountryinfo->countrycode) - || pcountryinfo->len > 254) { - lbs_deb_scan("process_bss: 11D- Err CountryInfo len %d, min %zd, max 254\n", - pcountryinfo->len, sizeof(pcountryinfo->countrycode)); + if (pcountryinfo->header.len < sizeof(pcountryinfo->countrycode) + || pcountryinfo->header.len > 254) { + lbs_deb_scan("%s: 11D- Err CountryInfo len %d, min %zd, max 254\n", + __func__, + pcountryinfo->header.len, + sizeof(pcountryinfo->countrycode)); ret = -1; goto done; } - memcpy(&bss->countryinfo, pcountryinfo, pcountryinfo->len + 2); + memcpy(&bss->countryinfo, pcountryinfo, + pcountryinfo->header.len + 2); lbs_deb_hex(LBS_DEB_SCAN, "process_bss: 11d countryinfo", (uint8_t *) pcountryinfo, - (int) (pcountryinfo->len + 2)); + (int) (pcountryinfo->header.len + 2)); break; case WLAN_EID_EXT_SUPP_RATES: diff --git a/drivers/net/wireless/libertas/types.h b/drivers/net/wireless/libertas/types.h index b8d2ce9..1055ecf 100644 --- a/drivers/net/wireless/libertas/types.h +++ b/drivers/net/wireless/libertas/types.h @@ -8,9 +8,14 @@ #include #include -struct ieee_ie_cf_param_set { - u8 elementid; +struct ieee_ie_header { + u8 id; u8 len; +} __attribute__ ((packed)); + +struct ieee_ie_cf_param_set { + struct ieee_ie_header header; + u8 cfpcnt; u8 cfpperiod; __le16 cfpmaxduration; @@ -19,8 +24,8 @@ struct ieee_ie_cf_param_set { struct ieee_ie_ibss_param_set { - u8 elementid; - u8 len; + struct ieee_ie_header header; + __le16 atimwindow; } __attribute__ ((packed)); @@ -30,8 +35,8 @@ union ieee_ss_param_set { } __attribute__ ((packed)); struct ieee_ie_fh_param_set { - u8 elementid; - u8 len; + struct ieee_ie_header header; + __le16 dwelltime; u8 hopset; u8 hoppattern; @@ -39,8 +44,8 @@ struct ieee_ie_fh_param_set { } __attribute__ ((packed)); struct ieee_ie_ds_param_set { - u8 elementid; - u8 len; + struct ieee_ie_header header; + u8 channel; } __attribute__ ((packed)); @@ -98,28 +103,28 @@ struct ieee_assoc_response { #define TLV_TYPE_OLD_MESH_ID (PROPRIETARY_TLV_BASE_ID + 291) /** TLV related data structures*/ -struct mrvlietypesheader { +struct mrvl_ie_header { __le16 type; __le16 len; } __attribute__ ((packed)); -struct mrvlietypes_data { - struct mrvlietypesheader header; +struct mrvl_ie_data { + struct mrvl_ie_header header; u8 Data[1]; } __attribute__ ((packed)); -struct mrvlietypes_ratesparamset { - struct mrvlietypesheader header; +struct mrvl_ie_rates_param_set { + struct mrvl_ie_header header; u8 rates[1]; } __attribute__ ((packed)); -struct mrvlietypes_ssidparamset { - struct mrvlietypesheader header; +struct mrvl_ie_ssid_param_set { + struct mrvl_ie_header header; u8 ssid[1]; } __attribute__ ((packed)); -struct mrvlietypes_wildcardssidparamset { - struct mrvlietypesheader header; +struct mrvl_ie_wildcard_ssid_param_set { + struct mrvl_ie_header header; u8 MaxSsidlength; u8 ssid[1]; } __attribute__ ((packed)); @@ -144,66 +149,66 @@ struct chanscanparamset { __le16 maxscantime; } __attribute__ ((packed)); -struct mrvlietypes_chanlistparamset { - struct mrvlietypesheader header; +struct mrvl_ie_chanlist_param_set { + struct mrvl_ie_header header; struct chanscanparamset chanscanparam[1]; } __attribute__ ((packed)); -struct mrvlietypes_cfparamset { - struct mrvlietypesheader header; +struct mrvl_ie_cf_param_set { + struct mrvl_ie_header header; u8 cfpcnt; u8 cfpperiod; __le16 cfpmaxduration; __le16 cfpdurationremaining; } __attribute__ ((packed)); -struct mrvlietypes_dsparamset { - struct mrvlietypesheader header; +struct mrvl_ie_ds_param_set { + struct mrvl_ie_header header; u8 channel; } __attribute__ ((packed)); -struct mrvlietypes_rsnparamset { - struct mrvlietypesheader header; +struct mrvl_ie_rsn_param_set { + struct mrvl_ie_header header; u8 rsnie[1]; } __attribute__ ((packed)); -struct mrvlietypes_tsftimestamp { - struct mrvlietypesheader header; +struct mrvl_ie_tsf_timestamp { + struct mrvl_ie_header header; __le64 tsftable[1]; } __attribute__ ((packed)); /** Local Power capability */ -struct mrvlietypes_powercapability { - struct mrvlietypesheader header; +struct mrvl_ie_power_capability { + struct mrvl_ie_header header; s8 minpower; s8 maxpower; } __attribute__ ((packed)); /* used in CMD_802_11_SUBSCRIBE_EVENT for SNR, RSSI and Failure */ -struct mrvlietypes_thresholds { - struct mrvlietypesheader header; +struct mrvl_ie_thresholds { + struct mrvl_ie_header header; u8 value; u8 freq; } __attribute__ ((packed)); -struct mrvlietypes_beaconsmissed { - struct mrvlietypesheader header; +struct mrvl_ie_beacons_missed { + struct mrvl_ie_header header; u8 beaconmissed; u8 reserved; } __attribute__ ((packed)); -struct mrvlietypes_numprobes { - struct mrvlietypesheader header; +struct mrvl_ie_num_probes { + struct mrvl_ie_header header; __le16 numprobes; } __attribute__ ((packed)); -struct mrvlietypes_bcastprobe { - struct mrvlietypesheader header; +struct mrvl_ie_bcast_probe { + struct mrvl_ie_header header; __le16 bcastprobe; } __attribute__ ((packed)); -struct mrvlietypes_numssidprobe { - struct mrvlietypesheader header; +struct mrvl_ie_num_ssid_probe { + struct mrvl_ie_header header; __le16 numssidprobe; } __attribute__ ((packed)); @@ -212,8 +217,8 @@ struct led_pin { u8 pin; } __attribute__ ((packed)); -struct mrvlietypes_ledgpio { - struct mrvlietypesheader header; +struct mrvl_ie_ledgpio { + struct mrvl_ie_header header; struct led_pin ledpin[1]; } __attribute__ ((packed)); @@ -225,8 +230,8 @@ struct led_bhv { } __attribute__ ((packed)); -struct mrvlietypes_ledbhv { - struct mrvlietypesheader header; +struct mrvl_ie_ledbhv { + struct mrvl_ie_header header; struct led_bhv ledbhv[1]; } __attribute__ ((packed)); -- cgit v0.10.2 From be0d76e48f6cc1f8b01eeb5efbeea41f2efdab49 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 22 May 2009 20:05:25 -0400 Subject: libertas: convert CMD_802_11_AUTHENTICATE to a direct command And fix up setting authentication suite for v9+ firmware too. Signed-off-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c index 75c67c9..d004170 100644 --- a/drivers/net/wireless/libertas/assoc.c +++ b/drivers/net/wireless/libertas/assoc.c @@ -19,8 +19,9 @@ static const u8 bssid_any[ETH_ALEN] __attribute__ ((aligned (2))) = static const u8 bssid_off[ETH_ALEN] __attribute__ ((aligned (2))) = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; -/* The firmware needs certain bits masked out of the beacon-derviced capability - * field when associating/joining to BSSs. +/* The firmware needs the following bits masked out of the beacon-derived + * capability field when associating/joining to a BSS: + * 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused) */ #define CAPINFO_MASK (~(0xda00)) @@ -102,6 +103,52 @@ static void lbs_set_basic_rate_flags(u8 *rates, size_t len) } +static u8 iw_auth_to_ieee_auth(u8 auth) +{ + if (auth == IW_AUTH_ALG_OPEN_SYSTEM) + return 0x00; + else if (auth == IW_AUTH_ALG_SHARED_KEY) + return 0x01; + else if (auth == IW_AUTH_ALG_LEAP) + return 0x80; + + lbs_deb_join("%s: invalid auth alg 0x%X\n", __func__, auth); + return 0; +} + +/** + * @brief This function prepares the authenticate command. AUTHENTICATE only + * sets the authentication suite for future associations, as the firmware + * handles authentication internally during the ASSOCIATE command. + * + * @param priv A pointer to struct lbs_private structure + * @param bssid The peer BSSID with which to authenticate + * @param auth The authentication mode to use (from wireless.h) + * + * @return 0 or -1 + */ +static int lbs_set_authentication(struct lbs_private *priv, u8 bssid[6], u8 auth) +{ + struct cmd_ds_802_11_authenticate cmd; + int ret = -1; + DECLARE_MAC_BUF(mac); + + lbs_deb_enter(LBS_DEB_JOIN); + + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); + memcpy(cmd.bssid, bssid, ETH_ALEN); + + cmd.authtype = iw_auth_to_ieee_auth(auth); + + lbs_deb_join("AUTH_CMD: BSSID %s, auth 0x%x\n", + print_mac(mac, bssid), cmd.authtype); + + ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd); + + lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); + return ret; +} + /** * @brief Associate to a specific BSS discovered in a scan * @@ -118,11 +165,15 @@ static int lbs_associate(struct lbs_private *priv, lbs_deb_enter(LBS_DEB_ASSOC); - ret = lbs_prepare_and_send_command(priv, CMD_802_11_AUTHENTICATE, - 0, CMD_OPTION_WAITFORRSP, - 0, assoc_req->bss.bssid); - if (ret) - goto out; + /* FW v9 and higher indicate authentication suites as a TLV in the + * association command, not as a separate authentication command. + */ + if (priv->fwrelease < 0x09000000) { + ret = lbs_set_authentication(priv, assoc_req->bss.bssid, + priv->secinfo.auth_mode); + if (ret) + goto out; + } /* Use short preamble only when both the BSS and firmware support it */ if ((priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) && @@ -1466,57 +1517,6 @@ struct assoc_request *lbs_get_association_request(struct lbs_private *priv) /** - * @brief This function prepares command of authenticate. - * - * @param priv A pointer to struct lbs_private structure - * @param cmd A pointer to cmd_ds_command structure - * @param pdata_buf Void cast of pointer to a BSSID to authenticate with - * - * @return 0 or -1 - */ -int lbs_cmd_80211_authenticate(struct lbs_private *priv, - struct cmd_ds_command *cmd, - void *pdata_buf) -{ - struct cmd_ds_802_11_authenticate *pauthenticate = &cmd->params.auth; - int ret = -1; - u8 *bssid = pdata_buf; - - lbs_deb_enter(LBS_DEB_JOIN); - - cmd->command = cpu_to_le16(CMD_802_11_AUTHENTICATE); - cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_authenticate) - + S_DS_GEN); - - /* translate auth mode to 802.11 defined wire value */ - switch (priv->secinfo.auth_mode) { - case IW_AUTH_ALG_OPEN_SYSTEM: - pauthenticate->authtype = 0x00; - break; - case IW_AUTH_ALG_SHARED_KEY: - pauthenticate->authtype = 0x01; - break; - case IW_AUTH_ALG_LEAP: - pauthenticate->authtype = 0x80; - break; - default: - lbs_deb_join("AUTH_CMD: invalid auth alg 0x%X\n", - priv->secinfo.auth_mode); - goto out; - } - - memcpy(pauthenticate->macaddr, bssid, ETH_ALEN); - - lbs_deb_join("AUTH_CMD: BSSID %pM, auth 0x%x\n", - bssid, pauthenticate->authtype); - ret = 0; - -out: - lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); - return ret; -} - -/** * @brief Deauthenticate from a specific BSS * * @param priv A pointer to struct lbs_private structure @@ -1557,12 +1557,13 @@ int lbs_cmd_80211_associate(struct lbs_private *priv, struct assoc_request *assoc_req = pdata_buf; struct bss_descriptor *bss = &assoc_req->bss; u8 *pos; - u16 tmpcap, tmplen; + u16 tmpcap, tmplen, tmpauth; struct mrvl_ie_ssid_param_set *ssid; struct mrvl_ie_ds_param_set *ds; struct mrvl_ie_cf_param_set *cf; struct mrvl_ie_rates_param_set *rates; struct mrvl_ie_rsn_param_set *rsn; + struct mrvl_ie_auth_type *auth; lbs_deb_enter(LBS_DEB_ASSOC); @@ -1627,6 +1628,21 @@ int lbs_cmd_80211_associate(struct lbs_private *priv, */ lbs_set_basic_rate_flags(rates->rates, tmplen); + /* Firmware v9+ indicate authentication suites as a TLV */ + if (priv->fwrelease >= 0x09000000) { + DECLARE_MAC_BUF(mac); + + auth = (struct mrvl_ie_auth_type *) pos; + auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); + auth->header.len = cpu_to_le16(2); + tmpauth = iw_auth_to_ieee_auth(priv->secinfo.auth_mode); + auth->auth = cpu_to_le16(tmpauth); + pos += sizeof(auth->header) + 2; + + lbs_deb_join("AUTH_CMD: BSSID %s, auth 0x%x\n", + print_mac(mac, bss->bssid), priv->secinfo.auth_mode); + } + if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) { rsn = (struct mrvl_ie_rsn_param_set *) pos; /* WPA_IE or WPA2_IE */ diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index ed079c1..bd740fc 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1220,8 +1220,7 @@ static void lbs_submit_command(struct lbs_private *priv, command = le16_to_cpu(cmd->command); /* These commands take longer */ - if (command == CMD_802_11_SCAN || command == CMD_802_11_ASSOCIATE || - command == CMD_802_11_AUTHENTICATE) + if (command == CMD_802_11_SCAN || command == CMD_802_11_ASSOCIATE) timeo = 5 * HZ; lbs_deb_cmd("DNLD_CMD: command 0x%04x, seq %d, size %d\n", @@ -1420,10 +1419,6 @@ int lbs_prepare_and_send_command(struct lbs_private *priv, ret = lbs_cmd_80211_associate(priv, cmdptr, pdata_buf); break; - case CMD_802_11_AUTHENTICATE: - ret = lbs_cmd_80211_authenticate(priv, cmdptr, pdata_buf); - break; - case CMD_MAC_REG_ACCESS: case CMD_BBP_REG_ACCESS: case CMD_RF_REG_ACCESS: diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c index bcf2a97..a830eca 100644 --- a/drivers/net/wireless/libertas/cmdresp.c +++ b/drivers/net/wireless/libertas/cmdresp.c @@ -225,7 +225,6 @@ static inline int handle_cmd_response(struct lbs_private *priv, break; - case CMD_RET(CMD_802_11_AUTHENTICATE): case CMD_RET(CMD_802_11_BEACON_STOP): break; diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h index 463ff97..4c930bd 100644 --- a/drivers/net/wireless/libertas/hostcmd.h +++ b/drivers/net/wireless/libertas/hostcmd.h @@ -250,7 +250,9 @@ struct cmd_ds_gspi_bus_config { } __attribute__ ((packed)); struct cmd_ds_802_11_authenticate { - u8 macaddr[ETH_ALEN]; + struct cmd_header hdr; + + u8 bssid[ETH_ALEN]; u8 authtype; u8 reserved[10]; } __attribute__ ((packed)); @@ -770,7 +772,6 @@ struct cmd_ds_command { union { struct cmd_ds_802_11_ps_mode psmode; struct cmd_ds_802_11_associate associate; - struct cmd_ds_802_11_authenticate auth; struct cmd_ds_802_11_get_stat gstat; struct cmd_ds_802_3_get_stat gstat_8023; struct cmd_ds_802_11_rf_antenna rant; diff --git a/drivers/net/wireless/libertas/types.h b/drivers/net/wireless/libertas/types.h index 1055ecf..4ad3bb6 100644 --- a/drivers/net/wireless/libertas/types.h +++ b/drivers/net/wireless/libertas/types.h @@ -99,6 +99,7 @@ struct ieee_assoc_response { #define TLV_TYPE_TSFTIMESTAMP (PROPRIETARY_TLV_BASE_ID + 19) #define TLV_TYPE_RSSI_HIGH (PROPRIETARY_TLV_BASE_ID + 22) #define TLV_TYPE_SNR_HIGH (PROPRIETARY_TLV_BASE_ID + 23) +#define TLV_TYPE_AUTH_TYPE (PROPRIETARY_TLV_BASE_ID + 31) #define TLV_TYPE_MESH_ID (PROPRIETARY_TLV_BASE_ID + 37) #define TLV_TYPE_OLD_MESH_ID (PROPRIETARY_TLV_BASE_ID + 291) @@ -177,6 +178,12 @@ struct mrvl_ie_tsf_timestamp { __le64 tsftable[1]; } __attribute__ ((packed)); +/* v9 and later firmware only */ +struct mrvl_ie_auth_type { + struct mrvl_ie_header header; + __le16 auth; +} __attribute__ ((packed)); + /** Local Power capability */ struct mrvl_ie_power_capability { struct mrvl_ie_header header; -- cgit v0.10.2 From 822ac03a07cc9e714727a6d49ea050b92483f82a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 22 May 2009 20:07:14 -0400 Subject: libertas: convert CMD_802_11_ASSOCIATE to a direct command Signed-off-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c index d004170..cb73720 100644 --- a/drivers/net/wireless/libertas/assoc.c +++ b/drivers/net/wireless/libertas/assoc.c @@ -12,8 +12,6 @@ #include "scan.h" #include "cmd.h" -static int lbs_adhoc_post(struct lbs_private *priv, struct cmd_header *resp); - static const u8 bssid_any[ETH_ALEN] __attribute__ ((aligned (2))) = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; static const u8 bssid_off[ETH_ALEN] __attribute__ ((aligned (2))) = @@ -149,6 +147,249 @@ static int lbs_set_authentication(struct lbs_private *priv, u8 bssid[6], u8 auth return ret; } + +static int lbs_assoc_post(struct lbs_private *priv, + struct cmd_ds_802_11_associate_response *resp) +{ + int ret = 0; + union iwreq_data wrqu; + struct bss_descriptor *bss; + u16 status_code; + + lbs_deb_enter(LBS_DEB_ASSOC); + + if (!priv->in_progress_assoc_req) { + lbs_deb_assoc("ASSOC_RESP: no in-progress assoc request\n"); + ret = -1; + goto done; + } + bss = &priv->in_progress_assoc_req->bss; + + /* + * Older FW versions map the IEEE 802.11 Status Code in the association + * response to the following values returned in resp->statuscode: + * + * IEEE Status Code Marvell Status Code + * 0 -> 0x0000 ASSOC_RESULT_SUCCESS + * 13 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED + * 14 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED + * 15 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED + * 16 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED + * others -> 0x0003 ASSOC_RESULT_REFUSED + * + * Other response codes: + * 0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused) + * 0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for + * association response from the AP) + */ + + status_code = le16_to_cpu(resp->statuscode); + if (priv->fwrelease < 0x09000000) { + switch (status_code) { + case 0x00: + break; + case 0x01: + lbs_deb_assoc("ASSOC_RESP: invalid parameters\n"); + break; + case 0x02: + lbs_deb_assoc("ASSOC_RESP: internal timer " + "expired while waiting for the AP\n"); + break; + case 0x03: + lbs_deb_assoc("ASSOC_RESP: association " + "refused by AP\n"); + break; + case 0x04: + lbs_deb_assoc("ASSOC_RESP: authentication " + "refused by AP\n"); + break; + default: + lbs_deb_assoc("ASSOC_RESP: failure reason 0x%02x " + " unknown\n", status_code); + break; + } + } else { + /* v9+ returns the AP's association response */ + lbs_deb_assoc("ASSOC_RESP: failure reason 0x%02x\n", status_code); + } + + if (status_code) { + lbs_mac_event_disconnected(priv); + ret = -1; + goto done; + } + + lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_RESP", + (void *) (resp + sizeof (resp->hdr)), + le16_to_cpu(resp->hdr.size) - sizeof (resp->hdr)); + + /* Send a Media Connected event, according to the Spec */ + priv->connect_status = LBS_CONNECTED; + + /* Update current SSID and BSSID */ + memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE); + priv->curbssparams.ssid_len = bss->ssid_len; + memcpy(priv->curbssparams.bssid, bss->bssid, ETH_ALEN); + + priv->SNR[TYPE_RXPD][TYPE_AVG] = 0; + priv->NF[TYPE_RXPD][TYPE_AVG] = 0; + + memset(priv->rawSNR, 0x00, sizeof(priv->rawSNR)); + memset(priv->rawNF, 0x00, sizeof(priv->rawNF)); + priv->nextSNRNF = 0; + priv->numSNRNF = 0; + + netif_carrier_on(priv->dev); + if (!priv->tx_pending_len) + netif_wake_queue(priv->dev); + + memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); + +done: + lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); + return ret; +} + +/** + * @brief This function prepares an association-class command. + * + * @param priv A pointer to struct lbs_private structure + * @param assoc_req The association request describing the BSS to associate + * or reassociate with + * @param command The actual command, either CMD_802_11_ASSOCIATE or + * CMD_802_11_REASSOCIATE + * + * @return 0 or -1 + */ +static int lbs_associate(struct lbs_private *priv, + struct assoc_request *assoc_req, + u16 command) +{ + struct cmd_ds_802_11_associate cmd; + int ret = 0; + struct bss_descriptor *bss = &assoc_req->bss; + u8 *pos = &(cmd.iebuf[0]); + u16 tmpcap, tmplen, tmpauth; + struct mrvl_ie_ssid_param_set *ssid; + struct mrvl_ie_ds_param_set *ds; + struct mrvl_ie_cf_param_set *cf; + struct mrvl_ie_rates_param_set *rates; + struct mrvl_ie_rsn_param_set *rsn; + struct mrvl_ie_auth_type *auth; + + lbs_deb_enter(LBS_DEB_ASSOC); + + BUG_ON((command != CMD_802_11_ASSOCIATE) && + (command != CMD_802_11_REASSOCIATE)); + + memset(&cmd, 0, sizeof(cmd)); + cmd.hdr.command = cpu_to_le16(command); + + /* Fill in static fields */ + memcpy(cmd.bssid, bss->bssid, ETH_ALEN); + cmd.listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL); + + /* Capability info */ + tmpcap = (bss->capability & CAPINFO_MASK); + if (bss->mode == IW_MODE_INFRA) + tmpcap |= WLAN_CAPABILITY_ESS; + cmd.capability = cpu_to_le16(tmpcap); + lbs_deb_assoc("ASSOC_CMD: capability 0x%04x\n", tmpcap); + + /* SSID */ + ssid = (struct mrvl_ie_ssid_param_set *) pos; + ssid->header.type = cpu_to_le16(TLV_TYPE_SSID); + tmplen = bss->ssid_len; + ssid->header.len = cpu_to_le16(tmplen); + memcpy(ssid->ssid, bss->ssid, tmplen); + pos += sizeof(ssid->header) + tmplen; + + ds = (struct mrvl_ie_ds_param_set *) pos; + ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); + ds->header.len = cpu_to_le16(1); + ds->channel = bss->phy.ds.channel; + pos += sizeof(ds->header) + 1; + + cf = (struct mrvl_ie_cf_param_set *) pos; + cf->header.type = cpu_to_le16(TLV_TYPE_CF); + tmplen = sizeof(*cf) - sizeof (cf->header); + cf->header.len = cpu_to_le16(tmplen); + /* IE payload should be zeroed, firmware fills it in for us */ + pos += sizeof(*cf); + + rates = (struct mrvl_ie_rates_param_set *) pos; + rates->header.type = cpu_to_le16(TLV_TYPE_RATES); + memcpy(&rates->rates, &bss->rates, MAX_RATES); + tmplen = MAX_RATES; + if (get_common_rates(priv, rates->rates, &tmplen)) { + ret = -1; + goto done; + } + pos += sizeof(rates->header) + tmplen; + rates->header.len = cpu_to_le16(tmplen); + lbs_deb_assoc("ASSOC_CMD: num rates %u\n", tmplen); + + /* Copy the infra. association rates into Current BSS state structure */ + memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); + memcpy(&priv->curbssparams.rates, &rates->rates, tmplen); + + /* Set MSB on basic rates as the firmware requires, but _after_ + * copying to current bss rates. + */ + lbs_set_basic_rate_flags(rates->rates, tmplen); + + /* Firmware v9+ indicate authentication suites as a TLV */ + if (priv->fwrelease >= 0x09000000) { + DECLARE_MAC_BUF(mac); + + auth = (struct mrvl_ie_auth_type *) pos; + auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); + auth->header.len = cpu_to_le16(2); + tmpauth = iw_auth_to_ieee_auth(priv->secinfo.auth_mode); + auth->auth = cpu_to_le16(tmpauth); + pos += sizeof(auth->header) + 2; + + lbs_deb_join("AUTH_CMD: BSSID %s, auth 0x%x\n", + print_mac(mac, bss->bssid), priv->secinfo.auth_mode); + } + + /* WPA/WPA2 IEs */ + if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) { + rsn = (struct mrvl_ie_rsn_param_set *) pos; + /* WPA_IE or WPA2_IE */ + rsn->header.type = cpu_to_le16((u16) assoc_req->wpa_ie[0]); + tmplen = (u16) assoc_req->wpa_ie[1]; + rsn->header.len = cpu_to_le16(tmplen); + memcpy(rsn->rsnie, &assoc_req->wpa_ie[2], tmplen); + lbs_deb_hex(LBS_DEB_JOIN, "ASSOC_CMD: WPA/RSN IE", (u8 *) rsn, + sizeof(rsn->header) + tmplen); + pos += sizeof(rsn->header) + tmplen; + } + + cmd.hdr.size = cpu_to_le16((sizeof(cmd) - sizeof(cmd.iebuf)) + + (u16)(pos - (u8 *) &cmd.iebuf)); + + /* update curbssparams */ + priv->curbssparams.channel = bss->phy.ds.channel; + + if (lbs_parse_dnld_countryinfo_11d(priv, bss)) { + ret = -1; + goto done; + } + + ret = lbs_cmd_with_response(priv, command, &cmd); + if (ret == 0) { + ret = lbs_assoc_post(priv, + (struct cmd_ds_802_11_associate_response *) &cmd); + } + +done: + lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); + return ret; +} + /** * @brief Associate to a specific BSS discovered in a scan * @@ -157,7 +398,7 @@ static int lbs_set_authentication(struct lbs_private *priv, u8 bssid[6], u8 auth * * @return 0-success, otherwise fail */ -static int lbs_associate(struct lbs_private *priv, +static int lbs_try_associate(struct lbs_private *priv, struct assoc_request *assoc_req) { int ret; @@ -184,14 +425,78 @@ static int lbs_associate(struct lbs_private *priv, if (ret) goto out; - ret = lbs_prepare_and_send_command(priv, CMD_802_11_ASSOCIATE, - 0, CMD_OPTION_WAITFORRSP, 0, assoc_req); + ret = lbs_associate(priv, assoc_req, CMD_802_11_ASSOCIATE); out: lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); return ret; } +static int lbs_adhoc_post(struct lbs_private *priv, + struct cmd_ds_802_11_ad_hoc_result *resp) +{ + int ret = 0; + u16 command = le16_to_cpu(resp->hdr.command); + u16 result = le16_to_cpu(resp->hdr.result); + union iwreq_data wrqu; + struct bss_descriptor *bss; + DECLARE_SSID_BUF(ssid); + + lbs_deb_enter(LBS_DEB_JOIN); + + if (!priv->in_progress_assoc_req) { + lbs_deb_join("ADHOC_RESP: no in-progress association " + "request\n"); + ret = -1; + goto done; + } + bss = &priv->in_progress_assoc_req->bss; + + /* + * Join result code 0 --> SUCCESS + */ + if (result) { + lbs_deb_join("ADHOC_RESP: failed (result 0x%X)\n", result); + if (priv->connect_status == LBS_CONNECTED) + lbs_mac_event_disconnected(priv); + ret = -1; + goto done; + } + + /* Send a Media Connected event, according to the Spec */ + priv->connect_status = LBS_CONNECTED; + + if (command == CMD_RET(CMD_802_11_AD_HOC_START)) { + /* Update the created network descriptor with the new BSSID */ + memcpy(bss->bssid, resp->bssid, ETH_ALEN); + } + + /* Set the BSSID from the joined/started descriptor */ + memcpy(&priv->curbssparams.bssid, bss->bssid, ETH_ALEN); + + /* Set the new SSID to current SSID */ + memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE); + priv->curbssparams.ssid_len = bss->ssid_len; + + netif_carrier_on(priv->dev); + if (!priv->tx_pending_len) + netif_wake_queue(priv->dev); + + memset(&wrqu, 0, sizeof(wrqu)); + memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); + + lbs_deb_join("ADHOC_RESP: Joined/started '%s', BSSID %pM, channel %d\n", + print_ssid(ssid, bss->ssid, bss->ssid_len), + priv->curbssparams.bssid, + priv->curbssparams.channel); + +done: + lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); + return ret; +} + /** * @brief Join an adhoc network found in a previous scan * @@ -337,8 +642,10 @@ static int lbs_adhoc_join(struct lbs_private *priv, } ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd); - if (ret == 0) - ret = lbs_adhoc_post(priv, (struct cmd_header *) &cmd); + if (ret == 0) { + ret = lbs_adhoc_post(priv, + (struct cmd_ds_802_11_ad_hoc_result *)&cmd); + } out: lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); @@ -445,7 +752,8 @@ static int lbs_adhoc_start(struct lbs_private *priv, ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd); if (ret == 0) - ret = lbs_adhoc_post(priv, (struct cmd_header *) &cmd); + ret = lbs_adhoc_post(priv, + (struct cmd_ds_802_11_ad_hoc_result *)&cmd); out: lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); @@ -770,7 +1078,7 @@ static int assoc_helper_essid(struct lbs_private *priv, assoc_req->ssid_len, NULL, IW_MODE_INFRA, channel); if (bss != NULL) { memcpy(&assoc_req->bss, bss, sizeof(struct bss_descriptor)); - ret = lbs_associate(priv, assoc_req); + ret = lbs_try_associate(priv, assoc_req); } else { lbs_deb_assoc("SSID not found; cannot associate\n"); } @@ -822,8 +1130,9 @@ static int assoc_helper_bssid(struct lbs_private *priv, memcpy(&assoc_req->bss, bss, sizeof(struct bss_descriptor)); if (assoc_req->mode == IW_MODE_INFRA) { - ret = lbs_associate(priv, assoc_req); - lbs_deb_assoc("ASSOC: lbs_associate(bssid) returned %d\n", ret); + ret = lbs_try_associate(priv, assoc_req); + lbs_deb_assoc("ASSOC: lbs_try_associate(bssid) returned %d\n", + ret); } else if (assoc_req->mode == IW_MODE_ADHOC) { lbs_adhoc_join(priv, assoc_req); } @@ -1549,299 +1858,3 @@ int lbs_cmd_80211_deauthenticate(struct lbs_private *priv, u8 bssid[ETH_ALEN], return ret; } -int lbs_cmd_80211_associate(struct lbs_private *priv, - struct cmd_ds_command *cmd, void *pdata_buf) -{ - struct cmd_ds_802_11_associate *passo = &cmd->params.associate; - int ret = 0; - struct assoc_request *assoc_req = pdata_buf; - struct bss_descriptor *bss = &assoc_req->bss; - u8 *pos; - u16 tmpcap, tmplen, tmpauth; - struct mrvl_ie_ssid_param_set *ssid; - struct mrvl_ie_ds_param_set *ds; - struct mrvl_ie_cf_param_set *cf; - struct mrvl_ie_rates_param_set *rates; - struct mrvl_ie_rsn_param_set *rsn; - struct mrvl_ie_auth_type *auth; - - lbs_deb_enter(LBS_DEB_ASSOC); - - pos = (u8 *) passo; - - if (!priv) { - ret = -1; - goto done; - } - - cmd->command = cpu_to_le16(CMD_802_11_ASSOCIATE); - - memcpy(passo->peerstaaddr, bss->bssid, sizeof(passo->peerstaaddr)); - pos += sizeof(passo->peerstaaddr); - - /* set the listen interval */ - passo->listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL); - - pos += sizeof(passo->capability); - pos += sizeof(passo->listeninterval); - pos += sizeof(passo->bcnperiod); - pos += sizeof(passo->dtimperiod); - - ssid = (struct mrvl_ie_ssid_param_set *) pos; - ssid->header.type = cpu_to_le16(TLV_TYPE_SSID); - tmplen = bss->ssid_len; - ssid->header.len = cpu_to_le16(tmplen); - memcpy(ssid->ssid, bss->ssid, tmplen); - pos += sizeof(ssid->header) + tmplen; - - ds = (struct mrvl_ie_ds_param_set *) pos; - ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); - ds->header.len = cpu_to_le16(1); - ds->channel = bss->phy.ds.channel; - pos += sizeof(ds->header) + 1; - - cf = (struct mrvl_ie_cf_param_set *) pos; - cf->header.type = cpu_to_le16(TLV_TYPE_CF); - tmplen = sizeof(*cf) - sizeof (cf->header); - cf->header.len = cpu_to_le16(tmplen); - /* IE payload should be zeroed, firmware fills it in for us */ - pos += sizeof(*cf); - - rates = (struct mrvl_ie_rates_param_set *) pos; - rates->header.type = cpu_to_le16(TLV_TYPE_RATES); - memcpy(&rates->rates, &bss->rates, MAX_RATES); - tmplen = MAX_RATES; - if (get_common_rates(priv, rates->rates, &tmplen)) { - ret = -1; - goto done; - } - pos += sizeof(rates->header) + tmplen; - rates->header.len = cpu_to_le16(tmplen); - lbs_deb_assoc("ASSOC_CMD: num rates %u\n", tmplen); - - /* Copy the infra. association rates into Current BSS state structure */ - memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); - memcpy(&priv->curbssparams.rates, &rates->rates, tmplen); - - /* Set MSB on basic rates as the firmware requires, but _after_ - * copying to current bss rates. - */ - lbs_set_basic_rate_flags(rates->rates, tmplen); - - /* Firmware v9+ indicate authentication suites as a TLV */ - if (priv->fwrelease >= 0x09000000) { - DECLARE_MAC_BUF(mac); - - auth = (struct mrvl_ie_auth_type *) pos; - auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); - auth->header.len = cpu_to_le16(2); - tmpauth = iw_auth_to_ieee_auth(priv->secinfo.auth_mode); - auth->auth = cpu_to_le16(tmpauth); - pos += sizeof(auth->header) + 2; - - lbs_deb_join("AUTH_CMD: BSSID %s, auth 0x%x\n", - print_mac(mac, bss->bssid), priv->secinfo.auth_mode); - } - - if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) { - rsn = (struct mrvl_ie_rsn_param_set *) pos; - /* WPA_IE or WPA2_IE */ - rsn->header.type = cpu_to_le16((u16) assoc_req->wpa_ie[0]); - tmplen = (u16) assoc_req->wpa_ie[1]; - rsn->header.len = cpu_to_le16(tmplen); - memcpy(rsn->rsnie, &assoc_req->wpa_ie[2], tmplen); - lbs_deb_hex(LBS_DEB_JOIN, "ASSOC_CMD: RSN IE", (u8 *) rsn, - sizeof(rsn->header) + tmplen); - pos += sizeof(rsn->header) + tmplen; - } - - /* update curbssparams */ - priv->curbssparams.channel = bss->phy.ds.channel; - - if (lbs_parse_dnld_countryinfo_11d(priv, bss)) { - ret = -1; - goto done; - } - - cmd->size = cpu_to_le16((u16) (pos - (u8 *) passo) + S_DS_GEN); - - /* set the capability info */ - tmpcap = (bss->capability & CAPINFO_MASK); - if (bss->mode == IW_MODE_INFRA) - tmpcap |= WLAN_CAPABILITY_ESS; - passo->capability = cpu_to_le16(tmpcap); - lbs_deb_assoc("ASSOC_CMD: capability 0x%04x\n", tmpcap); - -done: - lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); - return ret; -} - -int lbs_ret_80211_associate(struct lbs_private *priv, - struct cmd_ds_command *resp) -{ - int ret = 0; - union iwreq_data wrqu; - struct ieee_assoc_response *passocrsp; - struct bss_descriptor *bss; - u16 status_code; - - lbs_deb_enter(LBS_DEB_ASSOC); - - if (!priv->in_progress_assoc_req) { - lbs_deb_assoc("ASSOC_RESP: no in-progress assoc request\n"); - ret = -1; - goto done; - } - bss = &priv->in_progress_assoc_req->bss; - - passocrsp = (struct ieee_assoc_response *) &resp->params; - - /* - * Older FW versions map the IEEE 802.11 Status Code in the association - * response to the following values returned in passocrsp->statuscode: - * - * IEEE Status Code Marvell Status Code - * 0 -> 0x0000 ASSOC_RESULT_SUCCESS - * 13 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED - * 14 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED - * 15 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED - * 16 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED - * others -> 0x0003 ASSOC_RESULT_REFUSED - * - * Other response codes: - * 0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused) - * 0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for - * association response from the AP) - */ - - status_code = le16_to_cpu(passocrsp->statuscode); - switch (status_code) { - case 0x00: - break; - case 0x01: - lbs_deb_assoc("ASSOC_RESP: invalid parameters\n"); - break; - case 0x02: - lbs_deb_assoc("ASSOC_RESP: internal timer " - "expired while waiting for the AP\n"); - break; - case 0x03: - lbs_deb_assoc("ASSOC_RESP: association " - "refused by AP\n"); - break; - case 0x04: - lbs_deb_assoc("ASSOC_RESP: authentication " - "refused by AP\n"); - break; - default: - lbs_deb_assoc("ASSOC_RESP: failure reason 0x%02x " - " unknown\n", status_code); - break; - } - - if (status_code) { - lbs_mac_event_disconnected(priv); - ret = -1; - goto done; - } - - lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_RESP", (void *)&resp->params, - le16_to_cpu(resp->size) - S_DS_GEN); - - /* Send a Media Connected event, according to the Spec */ - priv->connect_status = LBS_CONNECTED; - - /* Update current SSID and BSSID */ - memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE); - priv->curbssparams.ssid_len = bss->ssid_len; - memcpy(priv->curbssparams.bssid, bss->bssid, ETH_ALEN); - - priv->SNR[TYPE_RXPD][TYPE_AVG] = 0; - priv->NF[TYPE_RXPD][TYPE_AVG] = 0; - - memset(priv->rawSNR, 0x00, sizeof(priv->rawSNR)); - memset(priv->rawNF, 0x00, sizeof(priv->rawNF)); - priv->nextSNRNF = 0; - priv->numSNRNF = 0; - - netif_carrier_on(priv->dev); - if (!priv->tx_pending_len) - netif_wake_queue(priv->dev); - - memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN); - wrqu.ap_addr.sa_family = ARPHRD_ETHER; - wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); - -done: - lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); - return ret; -} - -static int lbs_adhoc_post(struct lbs_private *priv, struct cmd_header *resp) -{ - int ret = 0; - u16 command = le16_to_cpu(resp->command); - u16 result = le16_to_cpu(resp->result); - struct cmd_ds_802_11_ad_hoc_result *adhoc_resp; - union iwreq_data wrqu; - struct bss_descriptor *bss; - DECLARE_SSID_BUF(ssid); - - lbs_deb_enter(LBS_DEB_JOIN); - - adhoc_resp = (struct cmd_ds_802_11_ad_hoc_result *) resp; - - if (!priv->in_progress_assoc_req) { - lbs_deb_join("ADHOC_RESP: no in-progress association " - "request\n"); - ret = -1; - goto done; - } - bss = &priv->in_progress_assoc_req->bss; - - /* - * Join result code 0 --> SUCCESS - */ - if (result) { - lbs_deb_join("ADHOC_RESP: failed (result 0x%X)\n", result); - if (priv->connect_status == LBS_CONNECTED) - lbs_mac_event_disconnected(priv); - ret = -1; - goto done; - } - - /* Send a Media Connected event, according to the Spec */ - priv->connect_status = LBS_CONNECTED; - - if (command == CMD_RET(CMD_802_11_AD_HOC_START)) { - /* Update the created network descriptor with the new BSSID */ - memcpy(bss->bssid, adhoc_resp->bssid, ETH_ALEN); - } - - /* Set the BSSID from the joined/started descriptor */ - memcpy(&priv->curbssparams.bssid, bss->bssid, ETH_ALEN); - - /* Set the new SSID to current SSID */ - memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE); - priv->curbssparams.ssid_len = bss->ssid_len; - - netif_carrier_on(priv->dev); - if (!priv->tx_pending_len) - netif_wake_queue(priv->dev); - - memset(&wrqu, 0, sizeof(wrqu)); - memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN); - wrqu.ap_addr.sa_family = ARPHRD_ETHER; - wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); - - lbs_deb_join("ADHOC_RESP: Joined/started '%s', BSSID %pM, channel %d\n", - print_ssid(ssid, bss->ssid, bss->ssid_len), - priv->curbssparams.bssid, - priv->curbssparams.channel); - -done: - lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); - return ret; -} - diff --git a/drivers/net/wireless/libertas/assoc.h b/drivers/net/wireless/libertas/assoc.h index 8b7336d..6e765e9 100644 --- a/drivers/net/wireless/libertas/assoc.h +++ b/drivers/net/wireless/libertas/assoc.h @@ -8,22 +8,9 @@ void lbs_association_worker(struct work_struct *work); struct assoc_request *lbs_get_association_request(struct lbs_private *priv); -struct cmd_ds_command; -int lbs_cmd_80211_authenticate(struct lbs_private *priv, - struct cmd_ds_command *cmd, - void *pdata_buf); - int lbs_adhoc_stop(struct lbs_private *priv); int lbs_cmd_80211_deauthenticate(struct lbs_private *priv, u8 bssid[ETH_ALEN], u16 reason); -int lbs_cmd_80211_associate(struct lbs_private *priv, - struct cmd_ds_command *cmd, - void *pdata_buf); - -int lbs_ret_80211_ad_hoc_start(struct lbs_private *priv, - struct cmd_ds_command *resp); -int lbs_ret_80211_associate(struct lbs_private *priv, - struct cmd_ds_command *resp); #endif /* _LBS_ASSOC_H */ diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index bd740fc..01db705 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1414,11 +1414,6 @@ int lbs_prepare_and_send_command(struct lbs_private *priv, ret = lbs_cmd_802_11_ps_mode(cmdptr, cmd_action); break; - case CMD_802_11_ASSOCIATE: - case CMD_802_11_REASSOCIATE: - ret = lbs_cmd_80211_associate(priv, cmdptr, pdata_buf); - break; - case CMD_MAC_REG_ACCESS: case CMD_BBP_REG_ACCESS: case CMD_RF_REG_ACCESS: diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c index a830eca..14b3d56 100644 --- a/drivers/net/wireless/libertas/cmdresp.c +++ b/drivers/net/wireless/libertas/cmdresp.c @@ -210,12 +210,6 @@ static inline int handle_cmd_response(struct lbs_private *priv, ret = lbs_ret_reg_access(priv, respcmd, resp); break; - case CMD_RET_802_11_ASSOCIATE: - case CMD_RET(CMD_802_11_ASSOCIATE): - case CMD_RET(CMD_802_11_REASSOCIATE): - ret = lbs_ret_80211_associate(priv, resp); - break; - case CMD_RET(CMD_802_11_SET_AFC): case CMD_RET(CMD_802_11_GET_AFC): spin_lock_irqsave(&priv->driver_lock, flags); diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h index 4c930bd..0a2e291 100644 --- a/drivers/net/wireless/libertas/hostcmd.h +++ b/drivers/net/wireless/libertas/hostcmd.h @@ -265,22 +265,23 @@ struct cmd_ds_802_11_deauthenticate { } __attribute__ ((packed)); struct cmd_ds_802_11_associate { - u8 peerstaaddr[6]; + struct cmd_header hdr; + + u8 bssid[6]; __le16 capability; __le16 listeninterval; __le16 bcnperiod; u8 dtimperiod; - -#if 0 - mrvlietypes_ssidparamset_t ssidParamSet; - mrvlietypes_phyparamset_t phyparamset; - mrvlietypes_ssparamset_t ssparamset; - mrvlietypes_ratesparamset_t ratesParamSet; -#endif + u8 iebuf[512]; /* Enough for required and most optional IEs */ } __attribute__ ((packed)); -struct cmd_ds_802_11_associate_rsp { - struct ieee_assoc_response response; +struct cmd_ds_802_11_associate_response { + struct cmd_header hdr; + + __le16 capability; + __le16 statuscode; + __le16 aid; + u8 iebuf[512]; } __attribute__ ((packed)); struct cmd_ds_802_11_set_wep { @@ -771,7 +772,6 @@ struct cmd_ds_command { /* command Body */ union { struct cmd_ds_802_11_ps_mode psmode; - struct cmd_ds_802_11_associate associate; struct cmd_ds_802_11_get_stat gstat; struct cmd_ds_802_3_get_stat gstat_8023; struct cmd_ds_802_11_rf_antenna rant; diff --git a/drivers/net/wireless/libertas/types.h b/drivers/net/wireless/libertas/types.h index 4ad3bb6..99905df 100644 --- a/drivers/net/wireless/libertas/types.h +++ b/drivers/net/wireless/libertas/types.h @@ -54,13 +54,6 @@ union ieee_phy_param_set { struct ieee_ie_ds_param_set ds; } __attribute__ ((packed)); -struct ieee_assoc_response { - __le16 capability; - __le16 statuscode; - __le16 aid; - u8 iebuffer[1]; -} __attribute__ ((packed)); - /** TLV type ID definition */ #define PROPRIETARY_TLV_BASE_ID 0x0100 -- cgit v0.10.2 From 2fa7a98fc96abe431e5d54d97104cdca197391fa Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 22 May 2009 20:09:58 -0400 Subject: libertas: fix WPA adhoc network creation Oddly enough, the firmware's JOIN/START commands don't appear to have any facility for setting custom IEs, thus the started adhoc network doesn't advertise its WPA capability in the beacon. Whee! Signed-off-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c index cb73720..b9b3741 100644 --- a/drivers/net/wireless/libertas/assoc.c +++ b/drivers/net/wireless/libertas/assoc.c @@ -711,11 +711,13 @@ static int lbs_adhoc_start(struct lbs_private *priv, /* set capability info */ tmpcap = WLAN_CAPABILITY_IBSS; - if (assoc_req->secinfo.wep_enabled) { - lbs_deb_join("ADHOC_START: WEP enabled, setting privacy on\n"); + if (assoc_req->secinfo.wep_enabled || + assoc_req->secinfo.WPAenabled || + assoc_req->secinfo.WPA2enabled) { + lbs_deb_join("ADHOC_START: WEP/WPA enabled, privacy on\n"); tmpcap |= WLAN_CAPABILITY_PRIVACY; } else - lbs_deb_join("ADHOC_START: WEP disabled, setting privacy off\n"); + lbs_deb_join("ADHOC_START: WEP disabled, privacy off\n"); cmd.capability = cpu_to_le16(tmpcap); -- cgit v0.10.2 From e535c7566e1318ccfa015e297f0309994f7bc078 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 23 May 2009 11:18:45 +0200 Subject: mac80211: deprecate conf.beacon_int properly Ivo has updated the driver to no longer use the change flag, so we can remove that, but rt2x00 and ath5k still use the actual value so let's mark it as deprecated too. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d72346f..0270aa6 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -527,7 +527,6 @@ enum ieee80211_conf_flags { * enum ieee80211_conf_changed - denotes which configuration changed * * @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed - * @_IEEE80211_CONF_CHANGE_BEACON_INTERVAL: DEPRECATED * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed @@ -538,7 +537,6 @@ enum ieee80211_conf_flags { */ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), - _IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1), IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3), IEEE80211_CONF_CHANGE_PS = BIT(4), @@ -548,14 +546,6 @@ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_IDLE = BIT(8), }; -static inline __deprecated enum ieee80211_conf_changed -__IEEE80211_CONF_CHANGE_BEACON_INTERVAL(void) -{ - return _IEEE80211_CONF_CHANGE_BEACON_INTERVAL; -} -#define IEEE80211_CONF_CHANGE_BEACON_INTERVAL \ - __IEEE80211_CONF_CHANGE_BEACON_INTERVAL() - /** * struct ieee80211_conf - configuration of the device * @@ -564,7 +554,7 @@ __IEEE80211_CONF_CHANGE_BEACON_INTERVAL(void) * @flags: configuration flags defined above * * @radio_enabled: when zero, driver is required to switch off the radio. - * @beacon_int: beacon interval (TODO make interface config) + * @beacon_int: DEPRECATED, DO NOT USE * * @listen_interval: listen interval in units of beacon interval * @max_sleep_period: the maximum number of beacon intervals to sleep for @@ -589,7 +579,7 @@ __IEEE80211_CONF_CHANGE_BEACON_INTERVAL(void) * number of transmissions not the number of retries */ struct ieee80211_conf { - int beacon_int; + int __deprecated beacon_int; u32 flags; int power_level, dynamic_ps_timeout; int max_sleep_period; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index e37770c..2683df9 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -289,16 +289,8 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, drv_bss_info_changed(local, &sdata->vif, &sdata->vif.bss_conf, changed); - /* - * DEPRECATED - * - * ~changed is just there to not do this at resume time - */ - if (changed & BSS_CHANGED_BEACON_INT && ~changed) { - local->hw.conf.beacon_int = sdata->vif.bss_conf.beacon_int; - ieee80211_hw_config(local, - _IEEE80211_CONF_CHANGE_BEACON_INTERVAL); - } + /* DEPRECATED */ + local->hw.conf.beacon_int = sdata->vif.bss_conf.beacon_int; } u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata) -- cgit v0.10.2 From 6b347bff145f9a8a0972ca8fc3c44dd1f91b0f16 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 23 May 2009 21:09:28 +0200 Subject: rt2x00: Remove last usage of beacon_int from ieee80211_config This removes the last usage of beacon_int inside the iee80211_config structure from rt2x00. The attempt is a bit hackish, and subject to change in the future when the entire rt2x00_dev structure is cleaned up and restructured. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 0197531..435f945 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -520,7 +520,7 @@ static void rt2400pci_config_ps(struct rt2x00_dev *rt2x00dev, if (state == STATE_SLEEP) { rt2x00pci_register_read(rt2x00dev, CSR20, ®); rt2x00_set_field32(®, CSR20_DELAY_AFTER_TBCN, - (libconf->conf->beacon_int - 20) * 16); + (rt2x00dev->beacon_int - 20) * 16); rt2x00_set_field32(®, CSR20_TBCN_BEFORE_WAKEUP, libconf->conf->listen_interval - 1); diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index f95cb64..08b30d0 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -569,7 +569,7 @@ static void rt2500pci_config_ps(struct rt2x00_dev *rt2x00dev, if (state == STATE_SLEEP) { rt2x00pci_register_read(rt2x00dev, CSR20, ®); rt2x00_set_field32(®, CSR20_DELAY_AFTER_TBCN, - (libconf->conf->beacon_int - 20) * 16); + (rt2x00dev->beacon_int - 20) * 16); rt2x00_set_field32(®, CSR20_TBCN_BEFORE_WAKEUP, libconf->conf->listen_interval - 1); diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 69f966f..66daf68 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -647,7 +647,7 @@ static void rt2500usb_config_ps(struct rt2x00_dev *rt2x00dev, if (state == STATE_SLEEP) { rt2500usb_register_read(rt2x00dev, MAC_CSR18, ®); rt2x00_set_field16(®, MAC_CSR18_DELAY_AFTER_BEACON, - libconf->conf->beacon_int - 20); + rt2x00dev->beacon_int - 20); rt2x00_set_field16(®, MAC_CSR18_BEACONS_BEFORE_WAKEUP, libconf->conf->listen_interval - 1); diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 2b64a61..a498dde 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -802,6 +802,11 @@ struct rt2x00_dev { u8 calibration[2]; /* + * Beacon interval. + */ + u16 beacon_int; + + /* * Low level statistics which will have * to be kept up to date while device is running. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index c5bbf0b..3e019a1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -108,6 +108,9 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, erp.basic_rates = bss_conf->basic_rates; erp.beacon_int = bss_conf->beacon_int; + /* Update global beacon interval time, this is needed for PS support */ + rt2x00dev->beacon_int = bss_conf->beacon_int; + rt2x00dev->ops->lib->config_erp(rt2x00dev, &erp); } diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index a8bf5c4..49b29ff 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -956,7 +956,7 @@ static void rt61pci_config_ps(struct rt2x00_dev *rt2x00dev, if (state == STATE_SLEEP) { rt2x00pci_register_read(rt2x00dev, MAC_CSR11, ®); rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN, - libconf->conf->beacon_int - 10); + rt2x00dev->beacon_int - 10); rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP, libconf->conf->listen_interval - 1); rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 5); diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 211a3d6..c188488 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -852,7 +852,7 @@ static void rt73usb_config_ps(struct rt2x00_dev *rt2x00dev, if (state == STATE_SLEEP) { rt2x00usb_register_read(rt2x00dev, MAC_CSR11, ®); rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN, - libconf->conf->beacon_int - 10); + rt2x00dev->beacon_int - 10); rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP, libconf->conf->listen_interval - 1); rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 5); -- cgit v0.10.2 From 51b50fbeb574f581c0b112e035541f42fa3e604a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 24 May 2009 16:42:30 +0200 Subject: cfg80211: validate AID of stations being added We have some validation code in mac80211 but said code will force an invalid AID to 0 which isn't a valid AID either; instead require a valid AID (1-2007) to be passed in from userspace in cfg80211 already. Also move the code before the race comment since it can only be executed during STA addition and thus is not racy. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 77e9ff5..cdfdb2e 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -664,18 +664,19 @@ static void sta_apply_parameters(struct ieee80211_local *local, spin_unlock_bh(&sta->lock); /* + * cfg80211 validates this (1-2007) and allows setting the AID + * only when creating a new station entry + */ + if (params->aid) + sta->sta.aid = params->aid; + + /* * FIXME: updating the following information is racy when this * function is called from ieee80211_change_station(). * However, all this information should be static so * maybe we should just reject attemps to change it. */ - if (params->aid) { - sta->sta.aid = params->aid; - if (sta->sta.aid > IEEE80211_MAX_AID) - sta->sta.aid = 0; /* XXX: should this be an error? */ - } - if (params->listen_interval >= 0) sta->listen_interval = params->listen_interval; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 4b4d3c8..19dc796 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1738,7 +1738,11 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]); params.listen_interval = nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]); + params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]); + if (!params.aid || params.aid > IEEE80211_MAX_AID) + return -EINVAL; + if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) params.ht_capa = nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]); -- cgit v0.10.2 From 362a415dce2130b0e4cebfc8f8fbd8128baff308 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 24 May 2009 16:43:15 +0200 Subject: nl80211: bounce scan request back to userspace When a scan finishes only the program that asked for it knows what kind of scan it was; let's tell everybody else about the scan parameters as well so they can evaluate the result of the scan better. Also helps with debugging. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 19dc796..909ebd6 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3563,11 +3563,43 @@ void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev) genlmsg_multicast(msg, 0, nl80211_config_mcgrp.id, GFP_KERNEL); } +static int nl80211_add_scan_req(struct sk_buff *msg, + struct cfg80211_registered_device *rdev) +{ + struct cfg80211_scan_request *req = rdev->scan_req; + struct nlattr *nest; + int i; + + if (WARN_ON(!req)) + return 0; + + nest = nla_nest_start(msg, NL80211_ATTR_SCAN_SSIDS); + if (!nest) + goto nla_put_failure; + for (i = 0; i < req->n_ssids; i++) + NLA_PUT(msg, i, req->ssids[i].ssid_len, req->ssids[i].ssid); + nla_nest_end(msg, nest); + + nest = nla_nest_start(msg, NL80211_ATTR_SCAN_FREQUENCIES); + if (!nest) + goto nla_put_failure; + for (i = 0; i < req->n_channels; i++) + NLA_PUT_U32(msg, i, req->channels[i]->center_freq); + nla_nest_end(msg, nest); + + if (req->ie) + NLA_PUT(msg, NL80211_ATTR_IE, req->ie_len, req->ie); + + return 0; + nla_put_failure: + return -ENOBUFS; +} + static int nl80211_send_scan_donemsg(struct sk_buff *msg, - struct cfg80211_registered_device *rdev, - struct net_device *netdev, - u32 pid, u32 seq, int flags, - u32 cmd) + struct cfg80211_registered_device *rdev, + struct net_device *netdev, + u32 pid, u32 seq, int flags, + u32 cmd) { void *hdr; @@ -3578,7 +3610,8 @@ static int nl80211_send_scan_donemsg(struct sk_buff *msg, NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx); NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex); - /* XXX: we should probably bounce back the request? */ + /* ignore errors and send incomplete event anyway */ + nl80211_add_scan_req(msg, rdev); return genlmsg_end(msg, hdr); diff --git a/net/wireless/scan.c b/net/wireless/scan.c index df59440..e95b638 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -29,13 +29,14 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted) goto out; WARN_ON(request != wiphy_to_dev(request->wiphy)->scan_req); - wiphy_to_dev(request->wiphy)->scan_req = NULL; if (aborted) nl80211_send_scan_aborted(wiphy_to_dev(request->wiphy), dev); else nl80211_send_scan_done(wiphy_to_dev(request->wiphy), dev); + wiphy_to_dev(request->wiphy)->scan_req = NULL; + #ifdef CONFIG_WIRELESS_EXT if (!aborted) { memset(&wrqu, 0, sizeof(wrqu)); -- cgit v0.10.2 From 8fc0fee09245fe740d81aded36f4af6db1054015 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 24 May 2009 16:57:19 +0200 Subject: cfg80211: use key size constants Instead of hardcoding the key length for validation, use the constants Zhu Yi recently added and add one for AES_CMAC too. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 34de8b2..a9173d5 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1092,6 +1092,7 @@ enum ieee80211_key_len { WLAN_KEY_LEN_WEP104 = 13, WLAN_KEY_LEN_CCMP = 16, WLAN_KEY_LEN_TKIP = 32, + WLAN_KEY_LEN_AES_CMAC = 16, }; /* diff --git a/net/wireless/util.c b/net/wireless/util.c index d072bff..5be9ed7 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -157,26 +157,25 @@ int cfg80211_validate_key_settings(struct key_params *params, int key_idx, params->cipher != WLAN_CIPHER_SUITE_WEP104) return -EINVAL; - /* TODO: add definitions for the lengths to linux/ieee80211.h */ switch (params->cipher) { case WLAN_CIPHER_SUITE_WEP40: - if (params->key_len != 5) + if (params->key_len != WLAN_KEY_LEN_WEP40) return -EINVAL; break; case WLAN_CIPHER_SUITE_TKIP: - if (params->key_len != 32) + if (params->key_len != WLAN_KEY_LEN_TKIP) return -EINVAL; break; case WLAN_CIPHER_SUITE_CCMP: - if (params->key_len != 16) + if (params->key_len != WLAN_KEY_LEN_CCMP) return -EINVAL; break; case WLAN_CIPHER_SUITE_WEP104: - if (params->key_len != 13) + if (params->key_len != WLAN_KEY_LEN_WEP104) return -EINVAL; break; case WLAN_CIPHER_SUITE_AES_CMAC: - if (params->key_len != 16) + if (params->key_len != WLAN_KEY_LEN_AES_CMAC) return -EINVAL; break; default: -- cgit v0.10.2 From d651ae32789cabfb78bdd1f3467bf034ae267d68 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Sun, 24 May 2009 20:43:50 +0300 Subject: iwlwifi: avoid build warning in iwl-core. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When building when CONFIG_IWLWIFI_DEBUG is not set, we get the following warning: /work/src/w/drivers/net/wireless/iwlwifi/iwl-core.c: In function ‘iwl_isr’: /work/src/w/drivers/net/wireless/iwlwifi/iwl-core.c:1707: warning: unused variable ‘inta_fh’ This patch avoids this warning by adding #ifdef CONFIG_IWLWIFI_DEBUG before the declaration of inta_fh in iwl_isr() in drivers/net/wireless/iwlwifi/iwl-core.c Signed-off-by: Rami Rosen Acked-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index a9da06f..ddd2219 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1704,8 +1704,9 @@ static irqreturn_t iwl_isr(int irq, void *data) { struct iwl_priv *priv = data; u32 inta, inta_mask; +#ifdef CONFIG_IWLWIFI_DEBUG u32 inta_fh; - +#endif if (!priv) return IRQ_NONE; -- cgit v0.10.2 From b63b0ea2c18bba44c934ec619ba47488553c3aa3 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 26 May 2009 11:10:46 +0800 Subject: iwmc3200wifi: fix fragmentation threshold setting We were sending the fragmentation threshold value to the wrong table, causing an LMAC assert when setting it from wext. Signed-off-by: Samuel Ortiz Signed-off-by: Zhu Yi Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.c b/drivers/net/wireless/iwmc3200wifi/cfg80211.c index 3256ad2..96f714e 100644 --- a/drivers/net/wireless/iwmc3200wifi/cfg80211.c +++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.c @@ -268,7 +268,7 @@ static int iwm_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed) iwm->conf.frag_threshold = wiphy->frag_threshold; - ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX, + ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_FA_CFG_FIX, CFG_FRAG_THRESHOLD, iwm->conf.frag_threshold); if (ret < 0) -- cgit v0.10.2 From 1bb563334858f48f65b58bab6d10b54080f4ee42 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 26 May 2009 12:17:52 -0700 Subject: iwmc3200wifi: fix printk format Fix printk format for size_t variable: drivers/net/wireless/iwmc3200wifi/fw.c:75: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by: Randy Dunlap Cc: ilw@linux.intel.com Acked-by: Samuel Ortiz Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwmc3200wifi/fw.c b/drivers/net/wireless/iwmc3200wifi/fw.c index db4ba08..ec1a15a 100644 --- a/drivers/net/wireless/iwmc3200wifi/fw.c +++ b/drivers/net/wireless/iwmc3200wifi/fw.c @@ -72,7 +72,7 @@ static int iwm_fw_op_offset(struct iwm_priv *iwm, const struct firmware *fw, } if (fw->size < IWM_HDR_LEN) { - IWM_ERR(iwm, "FW is too small (%d)\n", fw->size); + IWM_ERR(iwm, "FW is too small (%zu)\n", fw->size); return -EINVAL; } -- cgit v0.10.2 From 7ba10a8efe501e26d995aa9b6dc13395518a87e4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 May 2009 09:41:06 +0200 Subject: mac80211: fix transposed min/max CW values I accidentally transposed these in the patch that "fixed" the defaults, leading to extremely low throughput because of the huge min CW. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 949d857..31284c9 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -657,15 +657,15 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata) switch (queue) { case 3: /* AC_BK */ - qparam.cw_max = aCWmin; - qparam.cw_min = aCWmax; + qparam.cw_max = aCWmax; + qparam.cw_min = aCWmin; qparam.txop = 0; qparam.aifs = 7; break; default: /* never happens but let's not leave undefined */ case 2: /* AC_BE */ - qparam.cw_max = aCWmin; - qparam.cw_min = aCWmax; + qparam.cw_max = aCWmax; + qparam.cw_min = aCWmin; qparam.txop = 0; qparam.aifs = 3; break; -- cgit v0.10.2 From 034d655ee7b79a2f48ba4c2b620d2864a6e0aa14 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 May 2009 10:35:29 +0200 Subject: cfg80211: disallow interfering with stations on non-AP (part 2) On non-AP interfaces userspace has no business interfering with the station management, this can confuse mac80211 (and other drivers probably wouldn't support it anyway). Allow adding and removing stations only on AP interfaces. (Reconcile this w/ previous version of patch posted with same subject... -- JWL) Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 909ebd6..fd392ff 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1687,6 +1687,12 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) if (err) goto out_rtnl; + if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && + dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) { + err = -EINVAL; + goto out; + } + err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, ¶ms.vlan); if (err) goto out; -- cgit v0.10.2 From b74444f8a9039603715973a56df588a5d800c4ef Mon Sep 17 00:00:00 2001 From: Jeff Hansen Date: Wed, 27 May 2009 12:48:27 +0000 Subject: ath9k: Reset SC_OP_TSF_RESET flag after stuck beacon I have a TrendNet 652-BRP running OpenWRT + ath9k very well. The only problem is that the beacon gets stuck maybe once a day. After Vasanthakumar Thiagarajan's "ath9k: cleanup beacon parameters configuration" patch, ath9k would nearly re-configure the beacons after it detected the stuck beacon, and did a reset. But it would fail the SC_OP_TSF_RESET check in ath_beacon_config_ap. This patch gets the beacon fully reconfigured after the reset. Signed-off-by: Jeff Hansen Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index a21b213..0c67ed2 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -411,6 +411,7 @@ void ath_beacon_tasklet(unsigned long data) } else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) { DPRINTF(sc, ATH_DBG_BEACON, "beacon is officially stuck\n"); + sc->sc_flags |= SC_OP_TSF_RESET; ath_reset(sc, false); } -- cgit v0.10.2 From bedf087af96a24861d09586ac25c26691300ff4c Mon Sep 17 00:00:00 2001 From: Jeff Hansen Date: Wed, 27 May 2009 12:48:28 +0000 Subject: ath9k: Combine legacy and 11n rc statistics This patch combines the legacy and 11n rcstats into one, using the normal rate table indices instead of two separate indices for each mode. Legacy rates also get all of the PER and retry information, now, too. Signed-off-by: Jeff Hansen Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 97df20c..80115ea 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -224,111 +224,66 @@ static const struct file_operations fops_interrupt = { .owner = THIS_MODULE }; -static void ath_debug_stat_11n_rc(struct ath_softc *sc, struct sk_buff *skb) -{ - struct ath_tx_info_priv *tx_info_priv = NULL; - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ieee80211_tx_rate *rates = tx_info->status.rates; - int final_ts_idx, idx; - - tx_info_priv = ATH_TX_INFO_PRIV(tx_info); - final_ts_idx = tx_info_priv->tx.ts_rateindex; - idx = sc->cur_rate_table->info[rates[final_ts_idx].idx].dot11rate; - - sc->debug.stats.n_rcstats[idx].success++; -} - -static void ath_debug_stat_legacy_rc(struct ath_softc *sc, struct sk_buff *skb) +void ath_debug_stat_rc(struct ath_softc *sc, struct sk_buff *skb) { struct ath_tx_info_priv *tx_info_priv = NULL; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_tx_rate *rates = tx_info->status.rates; int final_ts_idx, idx; + struct ath_rc_stats *stats; tx_info_priv = ATH_TX_INFO_PRIV(tx_info); final_ts_idx = tx_info_priv->tx.ts_rateindex; idx = rates[final_ts_idx].idx; - - sc->debug.stats.legacy_rcstats[idx].success++; + stats = &sc->debug.stats.rcstats[idx]; + stats->success++; } -void ath_debug_stat_rc(struct ath_softc *sc, struct sk_buff *skb) -{ - if (conf_is_ht(&sc->hw->conf)) - ath_debug_stat_11n_rc(sc, skb); - else - ath_debug_stat_legacy_rc(sc, skb); -} - -/* FIXME: legacy rates, later on .. */ void ath_debug_stat_retries(struct ath_softc *sc, int rix, int xretries, int retries, u8 per) { - if (conf_is_ht(&sc->hw->conf)) { - int idx = sc->cur_rate_table->info[rix].dot11rate; + struct ath_rc_stats *stats = &sc->debug.stats.rcstats[rix]; - sc->debug.stats.n_rcstats[idx].xretries += xretries; - sc->debug.stats.n_rcstats[idx].retries += retries; - sc->debug.stats.n_rcstats[idx].per = per; - } + stats->xretries += xretries; + stats->retries += retries; + stats->per = per; } -static ssize_t ath_read_file_stat_11n_rc(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) +static ssize_t read_file_rcstat(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) { struct ath_softc *sc = file->private_data; - char buf[1024]; - unsigned int len = 0; + char *buf; + unsigned int len = 0, max; int i = 0; + ssize_t retval; - len += sprintf(buf, "%7s %13s %8s %8s %6s\n\n", "Rate", "Success", - "Retries", "XRetries", "PER"); - - for (i = 0; i <= 15; i++) { - len += snprintf(buf + len, sizeof(buf) - len, - "%5s%3d: %8u %8u %8u %8u\n", "MCS", i, - sc->debug.stats.n_rcstats[i].success, - sc->debug.stats.n_rcstats[i].retries, - sc->debug.stats.n_rcstats[i].xretries, - sc->debug.stats.n_rcstats[i].per); - } - - return simple_read_from_buffer(user_buf, count, ppos, buf, len); -} + if (sc->cur_rate_table == NULL) + return 0; -static ssize_t ath_read_file_stat_legacy_rc(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ath_softc *sc = file->private_data; - char buf[512]; - unsigned int len = 0; - int i = 0; + max = 80 + sc->cur_rate_table->rate_cnt * 64; + buf = kmalloc(max + 1, GFP_KERNEL); + if (buf == NULL) + return 0; + buf[max] = 0; - len += sprintf(buf, "%7s %13s\n\n", "Rate", "Success"); + len += sprintf(buf, "%5s %15s %8s %9s %3s\n\n", "Rate", "Success", + "Retries", "XRetries", "PER"); for (i = 0; i < sc->cur_rate_table->rate_cnt; i++) { - len += snprintf(buf + len, sizeof(buf) - len, "%5u: %12u\n", - sc->cur_rate_table->info[i].ratekbps / 1000, - sc->debug.stats.legacy_rcstats[i].success); + u32 ratekbps = sc->cur_rate_table->info[i].ratekbps; + struct ath_rc_stats *stats = &sc->debug.stats.rcstats[i]; + + len += snprintf(buf + len, max - len, + "%3u.%d: %8u %8u %8u %8u\n", ratekbps / 1000, + (ratekbps % 1000) / 100, stats->success, + stats->retries, stats->xretries, + stats->per); } - return simple_read_from_buffer(user_buf, count, ppos, buf, len); -} - -static ssize_t read_file_rcstat(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ath_softc *sc = file->private_data; - - if (sc->cur_rate_table == NULL) - return 0; - - if (conf_is_ht(&sc->hw->conf)) - return ath_read_file_stat_11n_rc(file, user_buf, count, ppos); - else - return ath_read_file_stat_legacy_rc(file, user_buf, count ,ppos); + retval = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return retval; } static const struct file_operations fops_rcstat = { diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h index db845cf..cf9146a 100644 --- a/drivers/net/wireless/ath/ath9k/debug.h +++ b/drivers/net/wireless/ath/ath9k/debug.h @@ -80,11 +80,7 @@ struct ath_interrupt_stats { u32 dtim; }; -struct ath_legacy_rc_stats { - u32 success; -}; - -struct ath_11n_rc_stats { +struct ath_rc_stats { u32 success; u32 retries; u32 xretries; @@ -93,8 +89,7 @@ struct ath_11n_rc_stats { struct ath_stats { struct ath_interrupt_stats istats; - struct ath_legacy_rc_stats legacy_rcstats[12]; /* max(11a,11b,11g) */ - struct ath_11n_rc_stats n_rcstats[16]; /* 0..15 MCS rates */ + struct ath_rc_stats rcstats[RATE_TABLE_SIZE]; }; struct ath9k_debug { -- cgit v0.10.2 From 2493928e4dbefa1869413cf24b7f605b9b69d0d2 Mon Sep 17 00:00:00 2001 From: Jeff Hansen Date: Wed, 27 May 2009 12:48:29 +0000 Subject: ath9k: Add "debug" file to debugfs This patch adds the debug file to the ath9k debugfs, which lets you modify the debug_mask at runtime, without having to reload the ath9k module. Signed-off-by: Jeff Hansen Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 80115ea..a42d631 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -44,6 +44,38 @@ static int ath9k_debugfs_open(struct inode *inode, struct file *file) return 0; } +static ssize_t read_file_debug(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + char buf[32]; + unsigned int len = 0; + len += snprintf(buf, sizeof(buf), "0x%08x\n", sc->debug.debug_mask); + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t write_file_debug(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + unsigned long mask; + char buf[32]; + if (copy_from_user(buf, user_buf, (sizeof(buf) - 1) < count ? + (sizeof(buf) - 1) : count)) + return 0; + buf[sizeof(buf)-1] = 0; + if (strict_strtoul(buf, 0, &mask) == 0) + sc->debug.debug_mask = mask; + return count; +} + +static const struct file_operations fops_debug = { + .read = read_file_debug, + .write = write_file_debug, + .open = ath9k_debugfs_open, + .owner = THIS_MODULE +}; + static ssize_t read_file_dma(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { @@ -461,6 +493,11 @@ int ath9k_init_debug(struct ath_softc *sc) if (!sc->debug.debugfs_phy) goto err; + sc->debug.debugfs_debug = debugfs_create_file("debug", + S_IRUGO | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_debug); + if (!sc->debug.debugfs_debug) + goto err; + sc->debug.debugfs_dma = debugfs_create_file("dma", S_IRUGO, sc->debug.debugfs_phy, sc, &fops_dma); if (!sc->debug.debugfs_dma) @@ -498,6 +535,7 @@ void ath9k_exit_debug(struct ath_softc *sc) debugfs_remove(sc->debug.debugfs_rcstat); debugfs_remove(sc->debug.debugfs_interrupt); debugfs_remove(sc->debug.debugfs_dma); + debugfs_remove(sc->debug.debugfs_debug); debugfs_remove(sc->debug.debugfs_phy); } diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h index cf9146a..edda15b 100644 --- a/drivers/net/wireless/ath/ath9k/debug.h +++ b/drivers/net/wireless/ath/ath9k/debug.h @@ -95,6 +95,7 @@ struct ath_stats { struct ath9k_debug { int debug_mask; struct dentry *debugfs_phy; + struct dentry *debugfs_debug; struct dentry *debugfs_dma; struct dentry *debugfs_interrupt; struct dentry *debugfs_rcstat; -- cgit v0.10.2 From 2c5b9e511fee1a856ffe6332e15c72a20d2c72f6 Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Wed, 27 May 2009 14:03:09 -0400 Subject: wireless: libertas: fix unaligned accesses Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Acked-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c index 14b3d56..c42d3fa 100644 --- a/drivers/net/wireless/libertas/cmdresp.c +++ b/drivers/net/wireless/libertas/cmdresp.c @@ -5,7 +5,7 @@ #include #include #include - +#include #include #include "host.h" @@ -154,11 +154,11 @@ static int lbs_ret_802_11_rssi(struct lbs_private *priv, lbs_deb_enter(LBS_DEB_CMD); /* store the non average value */ - priv->SNR[TYPE_BEACON][TYPE_NOAVG] = le16_to_cpu(rssirsp->SNR); - priv->NF[TYPE_BEACON][TYPE_NOAVG] = le16_to_cpu(rssirsp->noisefloor); + priv->SNR[TYPE_BEACON][TYPE_NOAVG] = get_unaligned_le16(&rssirsp->SNR); + priv->NF[TYPE_BEACON][TYPE_NOAVG] = get_unaligned_le16(&rssirsp->noisefloor); - priv->SNR[TYPE_BEACON][TYPE_AVG] = le16_to_cpu(rssirsp->avgSNR); - priv->NF[TYPE_BEACON][TYPE_AVG] = le16_to_cpu(rssirsp->avgnoisefloor); + priv->SNR[TYPE_BEACON][TYPE_AVG] = get_unaligned_le16(&rssirsp->avgSNR); + priv->NF[TYPE_BEACON][TYPE_AVG] = get_unaligned_le16(&rssirsp->avgnoisefloor); priv->RSSI[TYPE_BEACON][TYPE_NOAVG] = CAL_RSSI(priv->SNR[TYPE_BEACON][TYPE_NOAVG], diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index e5e30b2..601b542 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -1129,7 +1129,7 @@ static int lbs_ret_80211_scan(struct lbs_private *priv, unsigned long dummy, goto done; } - bytesleft = le16_to_cpu(scanresp->bssdescriptsize); + bytesleft = get_unaligned_le16(&scanresp->bssdescriptsize); lbs_deb_scan("SCAN_RESP: bssdescriptsize %d\n", bytesleft); scanrespsize = le16_to_cpu(resp->size); -- cgit v0.10.2 From 86ab04c8c1df51df7d6d3709da546e0163ac856b Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 27 May 2009 22:56:05 -0400 Subject: mac80211: handle -EALREADY on cfg80211 op assoc req When the SME requests to associate to an open AP ieee80211_sta_set_extra_ie() can be called with zero IE length. When this happens or when the extra IE has already been set -EALREADY is passed down and the supplicant will complain that the operation is already in progress and it will not let us associate. We correct this by treating -EALREADY from ieee80211_sta_set_extra_ie() as a success just as we do for wext. Cc: Shan.Palanisamy@Atheros.com Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index cdfdb2e..d2fc18c 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1256,7 +1256,7 @@ static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev, sdata->u.mgd.flags |= IEEE80211_STA_AUTO_SSID_SEL; ret = ieee80211_sta_set_extra_ie(sdata, req->ie, req->ie_len); - if (ret) + if (ret && ret != -EALREADY) return ret; if (req->use_mfp) { -- cgit v0.10.2 From 73ca5203366235f8a43e490767284ba8cfd8c479 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 28 May 2009 10:27:37 -0400 Subject: ath5k: remove conf->beacon_int usage ieee80211_conf->beacon_int was deprecated and removed in a cleanup patch, however it was accidentally added back to ath5k in the change "ath5k: Allow user/driver to set txpower." Remove it once more, fixing the following warning: [13091.968902] WARNING: at drivers/net/wireless/ath/ath5k/base.c:2167 warn_slowpath_null+0x15/0x1a() [13091.968906] Hardware name: MacBook1,1 [13091.968909] Modules linked in: usb_storage fuse i915 drm af_packet acpi_cpufreq binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath dm_mod snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_seq_dummy hid_apple arc4 ecb snd_seq_oss snd_seq_midi_event usbhid snd_seq ath5k mac80211 appletouch snd_seq_device snd_pcm_oss snd_mixer_oss sky2 snd_pcm ath processor cfg80211 snd_timer sg ohci1394 snd uhci_hcd bitrev ieee1394 joydev ehci_hcd crc32 snd_page_alloc button ac thermal battery sr_mod applesmc cdrom evdev input_polldev unix [last unloaded: microcode] [13091.968985] Pid: 2132, comm: phy0 Tainted: G W 2.6.30-rc5-wl #118 [13091.968988] Call Trace: [13091.968994] [] warn_slowpath_fmt+0x77/0xa6 [13091.969003] [] ? _spin_unlock+0x2c/0x41 [13091.969008] [] ? _spin_lock_irqsave+0x15/0x69 [13091.969012] [] ? _spin_unlock_irqrestore+0x34/0x5d [13091.969019] [] ? trace_hardirqs_off+0xb/0xd [13091.969024] [] ? _spin_unlock_irqrestore+0x34/0x5d [13091.969029] [] ? trace_hardirqs_off+0xb/0xd [13091.969034] [] ? _spin_unlock_irqrestore+0x34/0x5d [13091.969039] [] warn_slowpath_null+0x15/0x1a [13091.969054] [] ath5k_beacon_update_timers+0x44/0x27f [ath5k] [13091.969059] [] ? vprintk+0x2dd/0x312 [13091.969063] [] ? release_console_sem+0x1a6/0x1d3 [13091.969076] [] ath5k_reset_tsf+0x1d/0x2c [ath5k] [13091.969095] [] __ieee80211_sta_join_ibss+0x35/0x3aa [mac80211] [13091.969102] [] ? extract_entropy+0x47/0x8a [13091.969121] [] ieee80211_sta_find_ibss+0x2de/0x32f [mac80211] [13091.969126] [] ? mutex_lock_nested+0x28b/0x2a5 [13091.969145] [] ? ieee80211_ibss_notify_scan_completed+0x1c/0x6f [mac80211] [13091.969164] [] ieee80211_ibss_notify_scan_completed+0x57/0x6f [mac80211] [13091.969182] [] ieee80211_scan_completed+0x31a/0x33f [mac80211] [13091.969201] [] ieee80211_scan_work+0xcb/0x18b [mac80211] [13091.969207] [] worker_thread+0x1b1/0x28e [13091.969212] [] ? worker_thread+0x16c/0x28e [13091.969230] [] ? ieee80211_scan_work+0x0/0x18b [mac80211] [13091.969237] [] ? autoremove_wake_function+0x0/0x38 [13091.969242] [] ? worker_thread+0x0/0x28e [13091.969246] [] kthread+0x4a/0x70 [13091.971460] [] ? kthread+0x0/0x70 [13091.971467] [] kernel_thread_helper+0x7/0x10 [13091.971470] ---[ end trace 8defaa5d15c50cef ]--- Signed-off-by: Bob Copeland Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index dd6dc8d..ab2048b 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2775,8 +2775,6 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) mutex_lock(&sc->lock); - sc->bintval = conf->beacon_int; - ret = ath5k_chan_set(sc, conf->channel); if (ret < 0) goto unlock; -- cgit v0.10.2 From 546256fbd06d70a87381020ea8553fb78c9abf43 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 28 May 2009 19:25:28 +0300 Subject: ath9k: Add sanity check for beacon_int in adhoc/mesh case It looks like mac80211 can request the driver to start beaconing with a beacon interval of zero in some cases (at least for mesh point). This does not sound correct and something may need to be fixed in mac80211. However, taken into account the unpleasantness of getting stuck in an infinite busy loop with rtnl_lock held, let's add a quick workaround in the driver to avoid the worst symptom while someone more familiar with the mesh implementation can figure out what should be done with mac80211 as far as beacon interval configuration is concerned. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 0c67ed2..3639a2e 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -674,6 +674,14 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc, intval = conf->beacon_interval & ATH9K_BEACON_PERIOD; + /* + * It looks like mac80211 may end up using beacon interval of zero in + * some cases (at least for mesh point). Avoid getting into an + * infinite loop by using a bit safer value instead.. + */ + if (intval == 0) + intval = 100; + /* Pull nexttbtt forward to reflect the current TSF */ nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp); -- cgit v0.10.2 From c768b58d62d3106f0f670d35d1e7820c14ba769a Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 28 May 2009 17:36:04 -0400 Subject: ar9170: add support for 1-stage firmware You can get the stage 1 firmware from here: http://www.kernel.org/pub/linux/kernel/people/mcgrof/firmware/ar9170/ar9170.fw md5sum: 34feec4ec0eae3bb92c7c1ea2dfb4530 sha1sum: 6e5250498b815c2940d97242de31e054ae44e079 Its license: http://www.kernel.org/pub/linux/kernel/people/mcgrof/firmware/ar9170/LICENSE This is a new firmware, tested with WNDA3100. Cc: Peter Grabienski Cc: Stephen Chen Cc: Michael Fortin Cc: Johnny Cheng Cc: Yuan-Gu Wei Cc: Joerg Albert Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c index d7c13c0..3c97c09 100644 --- a/drivers/net/wireless/ath/ar9170/usb.c +++ b/drivers/net/wireless/ath/ar9170/usb.c @@ -51,6 +51,7 @@ MODULE_AUTHOR("Johannes Berg "); MODULE_AUTHOR("Christian Lamparter "); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless"); +MODULE_FIRMWARE("ar9170.fw"); MODULE_FIRMWARE("ar9170-1.fw"); MODULE_FIRMWARE("ar9170-2.fw"); @@ -504,17 +505,23 @@ static int ar9170_usb_request_firmware(struct ar9170_usb *aru) { int err = 0; - err = request_firmware(&aru->init_values, "ar9170-1.fw", + err = request_firmware(&aru->firmware, "ar9170.fw", &aru->udev->dev); - if (err) { - dev_err(&aru->udev->dev, "file with init values not found.\n"); - return err; + if (!err) { + aru->init_values = NULL; + return 0; } + dev_err(&aru->udev->dev, "ar9170.fw firmware file " + "not found, trying old firmware...\n"); + + err = request_firmware(&aru->init_values, "ar9170-1.fw", + &aru->udev->dev); + err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev); if (err) { release_firmware(aru->init_values); - dev_err(&aru->udev->dev, "firmware file not found.\n"); + dev_err(&aru->udev->dev, "file with init values not found.\n"); return err; } @@ -548,6 +555,9 @@ static int ar9170_usb_upload_firmware(struct ar9170_usb *aru) { int err; + if (!aru->init_values) + goto upload_fw_start; + /* First, upload initial values to device RAM */ err = ar9170_usb_upload(aru, aru->init_values->data, aru->init_values->size, 0x102800, false); @@ -557,6 +567,8 @@ static int ar9170_usb_upload_firmware(struct ar9170_usb *aru) return err; } +upload_fw_start: + /* Then, upload the firmware itself and start it */ return ar9170_usb_upload(aru, aru->firmware->data, aru->firmware->size, 0x200000, true); -- cgit v0.10.2 From bdf6d32f933bf28dfdca325281ee5266c753dc67 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 28 May 2009 17:36:05 -0400 Subject: ar9170: add AVM FRITZ devices This adds: USB 0x057C:0x8401 AVM FRITZ!WLAN USB Stick N USB 0x057C:0x8402 AVM FRITZ!WLAN USB Stick N 2.4 These devices require the 1-stage firmware, if not present we don't continue. Cc: Peter Grabienski Cc: Stephen Chen Cc: Michael Fortin Cc: Johnny Cheng Cc: Yuan-Gu Wei Cc: Joerg Albert Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c index 3c97c09..71579e4 100644 --- a/drivers/net/wireless/ath/ar9170/usb.c +++ b/drivers/net/wireless/ath/ar9170/usb.c @@ -55,6 +55,10 @@ MODULE_FIRMWARE("ar9170.fw"); MODULE_FIRMWARE("ar9170-1.fw"); MODULE_FIRMWARE("ar9170-2.fw"); +enum ar9170_requirements { + AR9170_REQ_FW1_ONLY = 1, +}; + static struct usb_device_id ar9170_usb_ids[] = { /* Atheros 9170 */ { USB_DEVICE(0x0cf3, 0x9170) }, @@ -82,6 +86,10 @@ static struct usb_device_id ar9170_usb_ids[] = { { USB_DEVICE(0x2019, 0x5304) }, /* IO-Data WNGDNUS2 */ { USB_DEVICE(0x04bb, 0x093f) }, + /* AVM FRITZ!WLAN USB Stick N */ + { USB_DEVICE(0x057C, 0x8401) }, + /* AVM FRITZ!WLAN USB Stick N 2.4 */ + { USB_DEVICE(0x057C, 0x8402), .driver_info = AR9170_REQ_FW1_ONLY }, /* terminate */ {} @@ -512,6 +520,12 @@ static int ar9170_usb_request_firmware(struct ar9170_usb *aru) return 0; } + if (aru->req_one_stage_fw) { + dev_err(&aru->udev->dev, "ar9170.fw firmware file " + "not found and is required for this device\n"); + return -EINVAL; + } + dev_err(&aru->udev->dev, "ar9170.fw firmware file " "not found, trying old firmware...\n"); @@ -668,6 +682,15 @@ err_out: return err; } +static bool ar9170_requires_one_stage(const struct usb_device_id *id) +{ + if (!id->driver_info) + return false; + if (id->driver_info == AR9170_REQ_FW1_ONLY) + return true; + return false; +} + static int ar9170_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -688,6 +711,8 @@ static int ar9170_usb_probe(struct usb_interface *intf, aru->intf = intf; ar = &aru->common; + aru->req_one_stage_fw = ar9170_requires_one_stage(id); + usb_set_intfdata(intf, aru); SET_IEEE80211_DEV(ar->hw, &udev->dev); diff --git a/drivers/net/wireless/ath/ar9170/usb.h b/drivers/net/wireless/ath/ar9170/usb.h index ac42586..69f4bce 100644 --- a/drivers/net/wireless/ath/ar9170/usb.h +++ b/drivers/net/wireless/ath/ar9170/usb.h @@ -62,6 +62,8 @@ struct ar9170_usb { struct usb_anchor rx_submitted; struct usb_anchor tx_submitted; + bool req_one_stage_fw; + spinlock_t cmdlock; struct completion cmd_wait; int readlen; -- cgit v0.10.2 From 3b8bcfd5d31ea0fec58681d035544ace707d2536 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 30 May 2009 01:39:53 +0200 Subject: net: introduce pre-up netdev notifier NETDEV_UP is called after the device is set UP, but sometimes it is useful to be able to veto the device UP. Introduce a new NETDEV_PRE_UP notifier that can be used for exactly this. The first use case will be cfg80211 denying interfaces to be set UP if the device is known to be rfkill'ed. Signed-off-by: Johannes Berg Acked-by: David S. Miller Signed-off-by: John W. Linville diff --git a/include/linux/notifier.h b/include/linux/notifier.h index b86fa2f..81bc252 100644 --- a/include/linux/notifier.h +++ b/include/linux/notifier.h @@ -198,6 +198,7 @@ static inline int notifier_to_errno(int ret) #define NETDEV_CHANGENAME 0x000A #define NETDEV_FEAT_CHANGE 0x000B #define NETDEV_BONDING_FAILOVER 0x000C +#define NETDEV_PRE_UP 0x000D #define SYS_DOWN 0x0001 /* Notify of system down */ #define SYS_RESTART SYS_DOWN diff --git a/net/core/dev.c b/net/core/dev.c index 34b49a6..1f38401 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1048,7 +1048,7 @@ void dev_load(struct net *net, const char *name) int dev_open(struct net_device *dev) { const struct net_device_ops *ops = dev->netdev_ops; - int ret = 0; + int ret; ASSERT_RTNL(); @@ -1065,6 +1065,11 @@ int dev_open(struct net_device *dev) if (!netif_device_present(dev)) return -ENODEV; + ret = call_netdevice_notifiers(NETDEV_PRE_UP, dev); + ret = notifier_to_errno(ret); + if (ret) + return ret; + /* * Call device private open method */ -- cgit v0.10.2 From 729e9c7663190d71fe5e29831634df80f38199c1 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Sun, 31 May 2009 18:24:34 -0400 Subject: cfg80211: fix for duplicate userspace replies This fixes an incorrect assumption (BUG_ON) made in cfg80211 when handling country IE regulatory requests. The assumption was that we won't try to call_crda() twice for the same event and therefore we will not recieve two replies through nl80211 for the regulatory request. As it turns out it is true we don't call_crda() twice for the same event, however, kobject_uevent_env() *might* send the udev event twice and/or userspace can simply process the udev event twice. We remove the BUG_ON() and simply ignore the duplicate request. For details refer to this thread: http://marc.info/?l=linux-wireless&m=124149987921337&w=2 Cc: stable@kernel.org Reported-by: Maxim Levitsky Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/net/wireless/reg.c b/net/wireless/reg.c index f87ac1d..ea4c299 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2171,7 +2171,13 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) * the country IE rd with what CRDA believes that country should have */ - BUG_ON(!country_ie_regdomain); + /* + * Userspace could have sent two replies with only + * one kernel request. By the second reply we would have + * already processed and consumed the country_ie_regdomain. + */ + if (!country_ie_regdomain) + return -EALREADY; BUG_ON(rd == country_ie_regdomain); /* -- cgit v0.10.2 From 4c4c671aea16d2795f29c7a369518c3c36e15d2a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 1 Jun 2009 14:29:52 +0200 Subject: mac80211_hwsim: remove deprecated radio_enabled This removes the use of the deprecated radio_enabled setting and code associated with that. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 574b8bb..e789c6e 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -280,7 +280,6 @@ struct mac80211_hwsim_data { struct ieee80211_rate rates[ARRAY_SIZE(hwsim_rates)]; struct ieee80211_channel *channel; - int radio_enabled; unsigned long beacon_int; /* in jiffies unit */ unsigned int rx_filter; int started; @@ -418,8 +417,7 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, if (data == data2) continue; - if (!data2->started || !data2->radio_enabled || - !hwsim_ps_rx_ok(data2, skb) || + if (!data2->started || !hwsim_ps_rx_ok(data2, skb) || data->channel->center_freq != data2->channel->center_freq || !(data->group & data2->group)) continue; @@ -441,7 +439,6 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, static int mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb) { - struct mac80211_hwsim_data *data = hw->priv; bool ack; struct ieee80211_tx_info *txi; @@ -453,13 +450,6 @@ static int mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb) return NETDEV_TX_OK; } - if (!data->radio_enabled) { - printk(KERN_DEBUG "%s: dropped TX frame since radio " - "disabled\n", wiphy_name(hw->wiphy)); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - ack = mac80211_hwsim_tx_frame(hw, skb); txi = IEEE80211_SKB_CB(skb); @@ -546,7 +536,7 @@ static void mac80211_hwsim_beacon(unsigned long arg) struct ieee80211_hw *hw = (struct ieee80211_hw *) arg; struct mac80211_hwsim_data *data = hw->priv; - if (!data->started || !data->radio_enabled) + if (!data->started) return; ieee80211_iterate_active_interfaces_atomic( @@ -562,15 +552,14 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) struct mac80211_hwsim_data *data = hw->priv; struct ieee80211_conf *conf = &hw->conf; - printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d idle=%d ps=%d)\n", + printk(KERN_DEBUG "%s:%s (freq=%d idle=%d ps=%d)\n", wiphy_name(hw->wiphy), __func__, - conf->channel->center_freq, conf->radio_enabled, + conf->channel->center_freq, !!(conf->flags & IEEE80211_CONF_IDLE), !!(conf->flags & IEEE80211_CONF_PS)); data->channel = conf->channel; - data->radio_enabled = conf->radio_enabled; - if (!data->started || !data->radio_enabled || !data->beacon_int) + if (!data->started || !data->beacon_int) del_timer(&data->beacon_timer); else mod_timer(&data->beacon_timer, jiffies + data->beacon_int); @@ -787,8 +776,7 @@ static void hwsim_send_ps_poll(void *dat, u8 *mac, struct ieee80211_vif *vif) pspoll->aid = cpu_to_le16(0xc000 | vp->aid); memcpy(pspoll->bssid, vp->bssid, ETH_ALEN); memcpy(pspoll->ta, mac, ETH_ALEN); - if (data->radio_enabled && - !mac80211_hwsim_tx_frame(data->hw, skb)) + if (!mac80211_hwsim_tx_frame(data->hw, skb)) printk(KERN_DEBUG "%s: PS-Poll frame not ack'ed\n", __func__); dev_kfree_skb(skb); } @@ -819,8 +807,7 @@ static void hwsim_send_nullfunc(struct mac80211_hwsim_data *data, u8 *mac, memcpy(hdr->addr1, vp->bssid, ETH_ALEN); memcpy(hdr->addr2, mac, ETH_ALEN); memcpy(hdr->addr3, vp->bssid, ETH_ALEN); - if (data->radio_enabled && - !mac80211_hwsim_tx_frame(data->hw, skb)) + if (!mac80211_hwsim_tx_frame(data->hw, skb)) printk(KERN_DEBUG "%s: nullfunc frame not ack'ed\n", __func__); dev_kfree_skb(skb); } -- cgit v0.10.2 From f46f0dc3f1e7bda2621617d5a379f8983ad1d5f8 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 1 Jun 2009 21:41:31 +0200 Subject: ar9170: fix beacon plcp settings This patch fixes a simple copy & paste error that affected beacon transmission in 802.11a mode. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c index 43aeb69..72c7b5d 100644 --- a/drivers/net/wireless/ath/ar9170/mac.c +++ b/drivers/net/wireless/ath/ar9170/mac.c @@ -398,10 +398,10 @@ int ar9170_update_beacon(struct ar9170 *ar) /* XXX: use skb->cb info */ if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ) ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP, - ((skb->len + 4) << (3+16)) + 0x0400); + ((skb->len + 4) << (3 + 16)) + 0x0400); else ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP, - ((skb->len + 4) << (3+16)) + 0x0400); + ((skb->len + 4) << 16) + 0x001b); ar9170_regwrite(AR9170_MAC_REG_BCN_LENGTH, skb->len + 4); ar9170_regwrite(AR9170_MAC_REG_BCN_ADDR, AR9170_BEACON_BUFFER_ADDRESS); -- cgit v0.10.2 From b9ad462e34b6eb8380c8534684326bb395b29c9f Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 1 Jun 2009 21:41:36 +0200 Subject: ar9170: update hardware definitions This patch only contains a few uncritical updates for the hardware definition header. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/hw.h b/drivers/net/wireless/ath/ar9170/hw.h index 3293e0f..3c8004f 100644 --- a/drivers/net/wireless/ath/ar9170/hw.h +++ b/drivers/net/wireless/ath/ar9170/hw.h @@ -207,7 +207,8 @@ enum ar9170_cmd { #define AR9170_MAC_REG_AC1_AC0_TXOP (AR9170_MAC_REG_BASE + 0xB44) #define AR9170_MAC_REG_AC3_AC2_TXOP (AR9170_MAC_REG_BASE + 0xB48) -#define AR9170_MAC_REG_AMPDU_SET (AR9170_MAC_REG_BASE + 0xba0) +#define AR9170_MAC_REG_AMPDU_FACTOR (AR9170_MAC_REG_BASE + 0xB9C) +#define AR9170_MAC_REG_AMPDU_DENSITY (AR9170_MAC_REG_BASE + 0xBA0) #define AR9170_MAC_REG_ACK_TABLE (AR9170_MAC_REG_BASE + 0xC00) #define AR9170_MAC_REG_AMPDU_RX_THRESH (AR9170_MAC_REG_BASE + 0xC50) @@ -376,7 +377,6 @@ static inline u8 ar9170_get_decrypt_type(struct ar9170_rx_macstatus *t) #define AR9170_RX_ERROR_FATAL 0x80 struct ar9170_cmd_tx_status { - __le16 unkn; u8 dst[ETH_ALEN]; __le32 rate; __le16 status; @@ -394,6 +394,7 @@ struct ar9170_cmd_ba_failed_count { struct ar9170_cmd_response { u8 flag; u8 type; + __le16 padding; union { struct ar9170_cmd_tx_status tx_status; diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c index 72c7b5d..706262f 100644 --- a/drivers/net/wireless/ath/ar9170/mac.c +++ b/drivers/net/wireless/ath/ar9170/mac.c @@ -84,7 +84,7 @@ static int ar9170_set_ampdu_density(struct ar9170 *ar, u8 mpdudensity) val = 0x140a00 | (mpdudensity ? (mpdudensity + 1) : 0); ar9170_regwrite_begin(ar); - ar9170_regwrite(AR9170_MAC_REG_AMPDU_SET, val); + ar9170_regwrite(AR9170_MAC_REG_AMPDU_DENSITY, val); ar9170_regwrite_finish(); return ar9170_regwrite_result(); -- cgit v0.10.2 From d7433390e49152101c1b31c08e38caf2a05a1169 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 1 Jun 2009 21:41:50 +0200 Subject: ar9170: 40mhz fixes This patch replace a few constant magics which may affected the device when operating in a 40MHz channel. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c index 6ce2075..df86f70 100644 --- a/drivers/net/wireless/ath/ar9170/phy.c +++ b/drivers/net/wireless/ath/ar9170/phy.c @@ -401,7 +401,7 @@ int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band) int i, err; u32 val; bool is_2ghz = band == IEEE80211_BAND_2GHZ; - bool is_40mhz = false; /* XXX: for now */ + bool is_40mhz = conf_is_ht40(&ar->hw->conf); ar9170_regwrite_begin(ar); @@ -1200,7 +1200,7 @@ int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel, return -ENOSYS; } - if (0 /* 2 streams capable */) + if (ar->eeprom.tx_mask != 1) tmp |= 0x100; err = ar9170_write_reg(ar, 0x1c5804, tmp); @@ -1214,7 +1214,7 @@ int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel, freqpar = ar9170_get_hw_dyn_params(channel, bw); vals[0] = cpu_to_le32(channel->center_freq * 1000); - vals[1] = cpu_to_le32(bw == AR9170_BW_20 ? 0 : 1); + vals[1] = cpu_to_le32(conf_is_ht40(&ar->hw->conf)); vals[2] = cpu_to_le32(offs << 2 | 1); vals[3] = cpu_to_le32(freqpar->coeff_exp); vals[4] = cpu_to_le32(freqpar->coeff_man); -- cgit v0.10.2 From 29ceff5d58afbb2c98bb748057788f02b8db20e5 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 1 Jun 2009 21:42:01 +0200 Subject: ar9170: introduce functions for MAC programming This patch introduces 3 new function which are used to update the MAC state, whenever needed... e.g: after a band switch. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h index 17bd3ea..77dc647 100644 --- a/drivers/net/wireless/ath/ar9170/ar9170.h +++ b/drivers/net/wireless/ath/ar9170/ar9170.h @@ -215,6 +215,9 @@ int ar9170_update_multicast(struct ar9170 *ar); int ar9170_update_frame_filter(struct ar9170 *ar); int ar9170_set_operating_mode(struct ar9170 *ar); int ar9170_set_beacon_timers(struct ar9170 *ar); +int ar9170_set_dyn_sifs_ack(struct ar9170 *ar); +int ar9170_set_slot_time(struct ar9170 *ar); +int ar9170_set_basic_rates(struct ar9170 *ar); int ar9170_set_hwretry_limit(struct ar9170 *ar, u32 max_retry); int ar9170_update_beacon(struct ar9170 *ar); void ar9170_new_beacon(struct work_struct *work); diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c index 706262f..d9f1f46 100644 --- a/drivers/net/wireless/ath/ar9170/mac.c +++ b/drivers/net/wireless/ath/ar9170/mac.c @@ -38,6 +38,55 @@ #include "ar9170.h" #include "cmd.h" +int ar9170_set_dyn_sifs_ack(struct ar9170 *ar) +{ + u32 val; + + if (conf_is_ht40(&ar->hw->conf)) + val = 0x010a; + else { + if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ) + val = 0x105; + else + val = 0x104; + } + + return ar9170_write_reg(ar, AR9170_MAC_REG_DYNAMIC_SIFS_ACK, val); +} + +int ar9170_set_slot_time(struct ar9170 *ar) +{ + u32 slottime = 20; + + if (!ar->vif) + return 0; + + if ((ar->hw->conf.channel->band == IEEE80211_BAND_5GHZ) || + ar->vif->bss_conf.use_short_slot) + slottime = 9; + + return ar9170_write_reg(ar, AR9170_MAC_REG_SLOT_TIME, slottime << 10); +} + +int ar9170_set_basic_rates(struct ar9170 *ar) +{ + u8 cck, ofdm; + + if (!ar->vif) + return 0; + + ofdm = ar->vif->bss_conf.basic_rates >> 4; + + /* FIXME: is still necessary? */ + if (ar->hw->conf.channel->band == IEEE80211_BAND_5GHZ) + cck = 0; + else + cck = ar->vif->bss_conf.basic_rates & 0xf; + + return ar9170_write_reg(ar, AR9170_MAC_REG_BASIC_RATE, + ofdm << 8 | cck); +} + int ar9170_set_qos(struct ar9170 *ar) { ar9170_regwrite_begin(ar); diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index 99df9dd..c54c42e 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -1344,15 +1344,21 @@ static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed) } if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + + /* adjust slot time for 5 GHz */ + err = ar9170_set_slot_time(ar); + if (err) + goto out; + + err = ar9170_set_dyn_sifs_ack(ar); + if (err) + goto out; + err = ar9170_set_channel(ar, hw->conf.channel, AR9170_RFI_NONE, nl80211_to_ar9170(hw->conf.channel_type)); if (err) goto out; - /* adjust slot time for 5 GHz */ - if (hw->conf.channel->band == IEEE80211_BAND_5GHZ) - err = ar9170_write_reg(ar, AR9170_MAC_REG_SLOT_TIME, - 9 << 10); } out: @@ -1464,15 +1470,19 @@ static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw, if (changed & BSS_CHANGED_BSSID) { memcpy(ar->bssid, bss_conf->bssid, ETH_ALEN); err = ar9170_set_operating_mode(ar); + if (err) + goto out; } if (changed & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED)) { err = ar9170_update_beacon(ar); - if (!err) - ar9170_set_beacon_timers(ar); - } + if (err) + goto out; - ar9170_regwrite_begin(ar); + err = ar9170_set_beacon_timers(ar); + if (err) + goto out; + } if (changed & BSS_CHANGED_ASSOC) { ar->state = bss_conf->assoc ? AR9170_ASSOCIATED : ar->state; @@ -1483,8 +1493,11 @@ static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw, #endif /* CONFIG_AR9170_LEDS */ } - if (changed & BSS_CHANGED_BEACON_INT) + if (changed & BSS_CHANGED_BEACON_INT) { err = ar9170_set_beacon_timers(ar); + if (err) + goto out; + } if (changed & BSS_CHANGED_HT) { /* TODO */ @@ -1492,31 +1505,18 @@ static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw, } if (changed & BSS_CHANGED_ERP_SLOT) { - u32 slottime = 20; - - if (bss_conf->use_short_slot) - slottime = 9; - - ar9170_regwrite(AR9170_MAC_REG_SLOT_TIME, slottime << 10); + err = ar9170_set_slot_time(ar); + if (err) + goto out; } if (changed & BSS_CHANGED_BASIC_RATES) { - u32 cck, ofdm; - - if (hw->conf.channel->band == IEEE80211_BAND_5GHZ) { - ofdm = bss_conf->basic_rates; - cck = 0; - } else { - /* four cck rates */ - cck = bss_conf->basic_rates & 0xf; - ofdm = bss_conf->basic_rates >> 4; - } - ar9170_regwrite(AR9170_MAC_REG_BASIC_RATE, - ofdm << 8 | cck); + err = ar9170_set_basic_rates(ar); + if (err) + goto out; } - ar9170_regwrite_finish(); - err = ar9170_regwrite_result(); +out: mutex_unlock(&ar->mutex); } -- cgit v0.10.2 From 864cc02e7c0ed9a83be0c35c05df1941abcc792d Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 23 May 2009 20:28:21 +0200 Subject: ar9170: use bitop macros for tx filter flags This patch fixes a bug in configure_filter's (sub-)routines. We never really cleared the flags once we updated the hardware state, so we wasted our resources by applying already active settings. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h index 77dc647..1247dcb9 100644 --- a/drivers/net/wireless/ath/ar9170/ar9170.h +++ b/drivers/net/wireless/ath/ar9170/ar9170.h @@ -140,7 +140,7 @@ struct ar9170 { struct work_struct filter_config_work; u64 cur_mc_hash, want_mc_hash; u32 cur_filter, want_filter; - unsigned int filter_changed; + unsigned long filter_changed; unsigned int filter_state; bool sniffer_enabled; @@ -195,7 +195,7 @@ struct ar9170_sta_info { #define IS_STARTED(a) (a->state >= AR9170_STARTED) #define IS_ACCEPTING_CMD(a) (a->state >= AR9170_IDLE) -#define AR9170_FILTER_CHANGED_PROMISC BIT(0) +#define AR9170_FILTER_CHANGED_MODE BIT(0) #define AR9170_FILTER_CHANGED_MULTICAST BIT(1) #define AR9170_FILTER_CHANGED_FRAMEFILTER BIT(2) diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index c54c42e..201989a 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -957,6 +957,8 @@ static int ar9170_op_start(struct ieee80211_hw *hw) mutex_lock(&ar->mutex); + ar->filter_changed = 0; + /* reinitialize queues statistics */ memset(&ar->tx_stats, 0, sizeof(ar->tx_stats)); for (i = 0; i < ARRAY_SIZE(ar->tx_stats); i++) @@ -1376,20 +1378,26 @@ static void ar9170_set_filters(struct work_struct *work) return ; mutex_lock(&ar->mutex); - if (ar->filter_changed & AR9170_FILTER_CHANGED_PROMISC) { + if (test_and_clear_bit(AR9170_FILTER_CHANGED_MODE, + &ar->filter_changed)) { err = ar9170_set_operating_mode(ar); if (err) goto unlock; } - if (ar->filter_changed & AR9170_FILTER_CHANGED_MULTICAST) { + if (test_and_clear_bit(AR9170_FILTER_CHANGED_MULTICAST, + &ar->filter_changed)) { err = ar9170_update_multicast(ar); if (err) goto unlock; } - if (ar->filter_changed & AR9170_FILTER_CHANGED_FRAMEFILTER) + if (test_and_clear_bit(AR9170_FILTER_CHANGED_FRAMEFILTER, + &ar->filter_changed)) { err = ar9170_update_frame_filter(ar); + if (err) + goto unlock; + } unlock: mutex_unlock(&ar->mutex); @@ -1419,7 +1427,7 @@ static void ar9170_op_configure_filter(struct ieee80211_hw *hw, int i; /* always get broadcast frames */ - mchash = 1ULL << (0xff>>2); + mchash = 1ULL << (0xff >> 2); for (i = 0; i < mc_count; i++) { if (WARN_ON(!mclist)) @@ -1429,7 +1437,7 @@ static void ar9170_op_configure_filter(struct ieee80211_hw *hw, } ar->want_mc_hash = mchash; } - ar->filter_changed |= AR9170_FILTER_CHANGED_MULTICAST; + set_bit(AR9170_FILTER_CHANGED_MULTICAST, &ar->filter_changed); } if (changed_flags & FIF_CONTROL) { @@ -1445,12 +1453,14 @@ static void ar9170_op_configure_filter(struct ieee80211_hw *hw, else ar->want_filter = ar->cur_filter & ~filter; - ar->filter_changed |= AR9170_FILTER_CHANGED_FRAMEFILTER; + set_bit(AR9170_FILTER_CHANGED_FRAMEFILTER, + &ar->filter_changed); } if (changed_flags & FIF_PROMISC_IN_BSS) { ar->sniffer_enabled = ((*new_flags) & FIF_PROMISC_IN_BSS) != 0; - ar->filter_changed |= AR9170_FILTER_CHANGED_PROMISC; + set_bit(AR9170_FILTER_CHANGED_MODE, + &ar->filter_changed); } if (likely(IS_STARTED(ar))) -- cgit v0.10.2 From 95cf8769bba6ea595994f786ea63f7e2948133de Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 23 May 2009 20:28:38 +0200 Subject: ar9170: kill duplicated HT feature flag This patch removes a redundant flag. .cap = IEEE80211_HT_CAP_MAX_AMSDU | \ > IEEE80211_HT_CAP_SM_PS | \ < [...] \ > IEEE80211_HT_CAP_SM_PS, \ < .ampdu_factor = 3, \ Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index 201989a..1657e89 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -146,7 +146,6 @@ static struct ieee80211_channel ar9170_5ghz_chantable[] = { { \ .ht_supported = true, \ .cap = IEEE80211_HT_CAP_MAX_AMSDU | \ - IEEE80211_HT_CAP_SM_PS | \ IEEE80211_HT_CAP_SUP_WIDTH_20_40 | \ IEEE80211_HT_CAP_SGI_40 | \ IEEE80211_HT_CAP_DSSSCCK40 | \ -- cgit v0.10.2 From 2431fe9a4b43ccf03589fa661662da6bfbd97282 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 25 May 2009 21:51:19 +0200 Subject: ar9170: fix LED power state handling This patch fixes a minor visual bug in the led code, which left the LED in the wrong power state when it was toggled in a _unexpected_ way (e.g: enabling the LED twice). Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h index 1247dcb9..396b240 100644 --- a/drivers/net/wireless/ath/ar9170/ar9170.h +++ b/drivers/net/wireless/ath/ar9170/ar9170.h @@ -91,6 +91,7 @@ struct ar9170_led { struct led_classdev l; char name[32]; unsigned int toggled; + bool last_state; bool registered; }; diff --git a/drivers/net/wireless/ath/ar9170/led.c b/drivers/net/wireless/ath/ar9170/led.c index 341cead..3c8a572 100644 --- a/drivers/net/wireless/ath/ar9170/led.c +++ b/drivers/net/wireless/ath/ar9170/led.c @@ -101,9 +101,12 @@ static void ar9170_led_brightness_set(struct led_classdev *led, struct ar9170_led *arl = container_of(led, struct ar9170_led, l); struct ar9170 *ar = arl->ar; - arl->toggled++; + if (arl->last_state != !!brightness) { + arl->toggled++; + arl->last_state = !!brightness; + } - if (likely(IS_ACCEPTING_CMD(ar) && brightness)) + if (likely(IS_ACCEPTING_CMD(ar) && arl->toggled)) queue_delayed_work(ar->hw->workqueue, &ar->led_work, HZ/10); } -- cgit v0.10.2 From b55d6bcf9b7082ae613e5d532608abcd409164ca Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 23 May 2009 20:31:21 +0200 Subject: ar9170: fix lockdep warning on hibernate This patch takes care of Johannes' deadlock report by moving the mutex_lock right after cancel_work_sync in ar9170_op_stop. Besides, the janitor does not need to hold the mutex anymore, so this extra lines can be removed as well. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index 1657e89..63528f1 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -343,7 +343,6 @@ static void ar9170_tx_status_janitor(struct work_struct *work) if (unlikely(!IS_STARTED(ar))) return ; - mutex_lock(&ar->mutex); /* recycle the garbage back to mac80211... one by one. */ while ((skb = skb_dequeue(&ar->global_tx_status_waste))) { #ifdef AR9170_QUEUE_DEBUG @@ -369,8 +368,6 @@ static void ar9170_tx_status_janitor(struct work_struct *work) if (skb_queue_len(&ar->global_tx_status_waste) > 0) queue_delayed_work(ar->hw->workqueue, &ar->tx_status_janitor, msecs_to_jiffies(100)); - - mutex_unlock(&ar->mutex); } static void ar9170_handle_command_response(struct ar9170 *ar, @@ -1013,10 +1010,10 @@ static void ar9170_op_stop(struct ieee80211_hw *hw) flush_workqueue(ar->hw->workqueue); - mutex_lock(&ar->mutex); cancel_delayed_work_sync(&ar->tx_status_janitor); cancel_work_sync(&ar->filter_config_work); cancel_work_sync(&ar->beacon_work); + mutex_lock(&ar->mutex); skb_queue_purge(&ar->global_tx_status_waste); skb_queue_purge(&ar->global_tx_status); -- cgit v0.10.2 From 66d008139c61d610f3ade9b46ad610e2cd277fb9 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Thu, 28 May 2009 17:04:27 +0200 Subject: ar9170usb: more minor fixes This patch contains a few more mostly random fixes for the USB front-end. 1. handle irq command response, instead of printing it to the console. 2. remove fixed FIXME. (real fix: "ar9170usb: reset device on resume". ) 3. some more one-liner. - get rid of a useless "return;" - add a few branch prediction hints in hot-paths etc. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h index 396b240..4c4b08f 100644 --- a/drivers/net/wireless/ath/ar9170/ar9170.h +++ b/drivers/net/wireless/ath/ar9170/ar9170.h @@ -207,6 +207,7 @@ void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb); void ar9170_unregister(struct ar9170 *ar); void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb, bool update_statistics, u16 tx_status); +void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len); /* MAC */ int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb); diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index 63528f1..b889fda 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -370,8 +370,7 @@ static void ar9170_tx_status_janitor(struct work_struct *work) msecs_to_jiffies(100)); } -static void ar9170_handle_command_response(struct ar9170 *ar, - void *buf, u32 len) +void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len) { struct ar9170_cmd_response *cmd = (void *) buf; diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c index 71579e4..f752698 100644 --- a/drivers/net/wireless/ath/ar9170/usb.c +++ b/drivers/net/wireless/ath/ar9170/usb.c @@ -102,7 +102,7 @@ static void ar9170_usb_tx_urb_complete_free(struct urb *urb) struct ar9170_usb *aru = (struct ar9170_usb *) usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); - if (!aru) { + if (unlikely(!aru)) { dev_kfree_skb_irq(skb); return ; } @@ -135,8 +135,8 @@ static void ar9170_usb_irq_completed(struct urb *urb) goto resubmit; } - print_hex_dump_bytes("ar9170 irq: ", DUMP_PREFIX_OFFSET, - urb->transfer_buffer, urb->actual_length); + ar9170_handle_command_response(&aru->common, urb->transfer_buffer, + urb->actual_length); resubmit: usb_anchor_urb(urb, &aru->rx_submitted); @@ -186,16 +186,15 @@ resubmit: usb_anchor_urb(urb, &aru->rx_submitted); err = usb_submit_urb(urb, GFP_ATOMIC); - if (err) { + if (unlikely(err)) { usb_unanchor_urb(urb); - dev_kfree_skb_irq(skb); + goto free; } return ; free: dev_kfree_skb_irq(skb); - return; } static int ar9170_usb_prep_rx_urb(struct ar9170_usb *aru, @@ -346,7 +345,7 @@ static int ar9170_usb_exec_cmd(struct ar9170 *ar, enum ar9170_cmd cmd, usb_anchor_urb(urb, &aru->tx_submitted); err = usb_submit_urb(urb, GFP_ATOMIC); - if (err) { + if (unlikely(err)) { usb_unanchor_urb(urb); usb_free_urb(urb); goto err_unbuf; @@ -427,7 +426,7 @@ static void ar9170_usb_callback_cmd(struct ar9170 *ar, u32 len , void *buffer) unsigned long flags; u32 in, out; - if (!buffer) + if (unlikely(!buffer)) return ; in = le32_to_cpup((__le32 *)buffer); @@ -728,7 +727,7 @@ static int ar9170_usb_probe(struct usb_interface *intf, #ifdef CONFIG_PM udev->reset_resume = 1; -#endif +#endif /* CONFIG_PM */ err = ar9170_usb_reset(aru); if (err) goto err_freehw; @@ -813,11 +812,6 @@ static int ar9170_resume(struct usb_interface *intf) usb_unpoison_anchored_urbs(&aru->rx_submitted); usb_unpoison_anchored_urbs(&aru->tx_submitted); - /* - * FIXME: firmware upload will fail on resume. - * but this is better than a hang! - */ - err = ar9170_usb_init_device(aru); if (err) goto err_unrx; -- cgit v0.10.2 From 6d7db193f2097d2f12fdc6b2300439a91a3196be Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 1 Jun 2009 22:49:25 +0200 Subject: ar9170: cancel led worker properly on exit "[PATCH 3/4 v2] ar9170: fix LED power state handling" revealed a bug which can cause a ugly crash. The delayed worker is canceled before the LED class functions are unregistered... So, if something manages to update the LEDs while unregister routine is running the timer could fire _after_ the module has been unloaded. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/led.c b/drivers/net/wireless/ath/ar9170/led.c index 3c8a572..63fda6c 100644 --- a/drivers/net/wireless/ath/ar9170/led.c +++ b/drivers/net/wireless/ath/ar9170/led.c @@ -74,7 +74,7 @@ static void ar9170_update_leds(struct work_struct *work) mutex_lock(&ar->mutex); for (i = 0; i < AR9170_NUM_LEDS; i++) - if (ar->leds[i].toggled) { + if (ar->leds[i].registered && ar->leds[i].toggled) { led_val |= 1 << i; tmp = 70 + 200 / (ar->leds[i].toggled); @@ -101,6 +101,9 @@ static void ar9170_led_brightness_set(struct led_classdev *led, struct ar9170_led *arl = container_of(led, struct ar9170_led, l); struct ar9170 *ar = arl->ar; + if (unlikely(!arl->registered)) + return ; + if (arl->last_state != !!brightness) { arl->toggled++; arl->last_state = !!brightness; @@ -139,13 +142,14 @@ void ar9170_unregister_leds(struct ar9170 *ar) { int i; - cancel_delayed_work_sync(&ar->led_work); - for (i = 0; i < AR9170_NUM_LEDS; i++) if (ar->leds[i].registered) { led_classdev_unregister(&ar->leds[i].l); ar->leds[i].registered = false; + ar->leds[i].toggled = 0; } + + cancel_delayed_work_sync(&ar->led_work); } int ar9170_register_leds(struct ar9170 *ar) -- cgit v0.10.2 From 939cab83ea592fcf4d854563d6c71d813a691872 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 2 Jun 2009 15:52:20 +0800 Subject: iwmc3200wifi: shrink calibration lmac name iwmc3200wifi: trim down calibration firmware name The patch trims down iwmc3200wifi calibration firmware name from iwmc3200wifi-lmac-calib-sdio.bin to iwmc3200wifi-calib-sdio.bin. We can shorten the firmware name because all calibration is done by LMAC. Signed-off-by: Samuel Ortiz Signed-off-by: Zhu Yi Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c index edc0a00..b54da67 100644 --- a/drivers/net/wireless/iwmc3200wifi/sdio.c +++ b/drivers/net/wireless/iwmc3200wifi/sdio.c @@ -395,7 +395,7 @@ static struct iwm_if_ops if_sdio_ops = { .debugfs_init = if_sdio_debugfs_init, .debugfs_exit = if_sdio_debugfs_exit, .umac_name = "iwmc3200wifi-umac-sdio.bin", - .calib_lmac_name = "iwmc3200wifi-lmac-calib-sdio.bin", + .calib_lmac_name = "iwmc3200wifi-calib-sdio.bin", .lmac_name = "iwmc3200wifi-lmac-sdio.bin", }; -- cgit v0.10.2 From 328d84fb3614d006254c990a6224ce437147a5ac Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 27 May 2009 10:12:51 +0200 Subject: wireless/p54: prepare for FIRMWARE_NAME_MAX removal We're going to remove the FIRMWARE_NAME_MAX definition in order to avoid any firmware name length restriction. This patch gets rid of the statically allocated p54usb firmware string, and replaces them with const char pointers. Signed-off-by: Samuel Ortiz Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index f40c0f4..0e877a1 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -84,8 +84,8 @@ MODULE_DEVICE_TABLE(usb, p54u_table); static const struct { u32 intf; enum p54u_hw_type type; - char fw[FIRMWARE_NAME_MAX]; - char fw_legacy[FIRMWARE_NAME_MAX]; + const char *fw; + const char *fw_legacy; char hw[20]; } p54u_fwlist[__NUM_P54U_HWTYPES] = { { -- cgit v0.10.2 From 6bc61f4d8e2fa3d54017c29b58603e8771158a25 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 1 Jun 2009 18:04:36 -0700 Subject: libertas: improve function init/shutdown handling for SD8688 This patch is to incorporate Dan Williams' comments for commit: "libertas: implement function init/shutdown commands for SD8688" 1. remove fn_init_required and fn_shutdown_required variables from lbs_private structure. If required, __lbs_cmd() will be called directly to send function init/shutdown command for SD8688 in if_sdio_probe() or if_sdio_remove() callback. 2. add global variable "user_rmmod" to distinguish between the module removal case and the card removal case. This flag will be checked in if_sdio_remove() against SD8688 card to determine whether or not the function shutdown command needs to be sent. 3. remove "card" from if_sdio_model structure as it cannot store card pointers for multiple cards. Besides, it's no longer needed to store the "card" pointer with changes #1 & #2 above. Signed-off-by: Bing Zhao Acked-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index 9e11f90..f9ec69e 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -321,8 +321,6 @@ struct lbs_private { u32 monitormode; u8 fw_ready; - u8 fn_init_required; - u8 fn_shutdown_required; }; extern struct cmd_confirm_sleep confirm_sleep; diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index a7e3fc1..8cdb88c 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -39,8 +39,24 @@ #include "decl.h" #include "defs.h" #include "dev.h" +#include "cmd.h" #include "if_sdio.h" +/* The if_sdio_remove() callback function is called when + * user removes this module from kernel space or ejects + * the card from the slot. The driver handles these 2 cases + * differently for SD8688 combo chip. + * If the user is removing the module, the FUNC_SHUTDOWN + * command for SD8688 is sent to the firmware. + * If the card is removed, there is no need to send this command. + * + * The variable 'user_rmmod' is used to distinguish these two + * scenarios. This flag is initialized as FALSE in case the card + * is removed, and will be set to TRUE for module removal when + * module_exit function is called. + */ +static u8 user_rmmod; + static char *lbs_helper_name = NULL; module_param_named(helper_name, lbs_helper_name, charp, 0644); @@ -61,7 +77,6 @@ struct if_sdio_model { int model; const char *helper; const char *firmware; - struct if_sdio_card *card; }; static struct if_sdio_model if_sdio_models[] = { @@ -70,21 +85,18 @@ static struct if_sdio_model if_sdio_models[] = { .model = IF_SDIO_MODEL_8385, .helper = "sd8385_helper.bin", .firmware = "sd8385.bin", - .card = NULL, }, { /* 8686 */ .model = IF_SDIO_MODEL_8686, .helper = "sd8686_helper.bin", .firmware = "sd8686.bin", - .card = NULL, }, { /* 8688 */ .model = IF_SDIO_MODEL_8688, .helper = "sd8688_helper.bin", .firmware = "sd8688.bin", - .card = NULL, }, }; @@ -927,8 +939,6 @@ static int if_sdio_probe(struct sdio_func *func, goto free; } - if_sdio_models[i].card = card; - card->helper = if_sdio_models[i].helper; card->firmware = if_sdio_models[i].firmware; @@ -1014,8 +1024,16 @@ static int if_sdio_probe(struct sdio_func *func, /* * FUNC_INIT is required for SD8688 WLAN/BT multiple functions */ - priv->fn_init_required = - (card->model == IF_SDIO_MODEL_8688) ? 1 : 0; + if (card->model == IF_SDIO_MODEL_8688) { + struct cmd_header cmd; + + memset(&cmd, 0, sizeof(cmd)); + + lbs_deb_sdio("send function INIT command\n"); + if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd), + lbs_cmd_copyback, (unsigned long) &cmd)) + lbs_pr_alert("CMD_FUNC_INIT cmd failed\n"); + } ret = lbs_start_card(priv); if (ret) @@ -1057,30 +1075,39 @@ static void if_sdio_remove(struct sdio_func *func) { struct if_sdio_card *card; struct if_sdio_packet *packet; - int ret; lbs_deb_enter(LBS_DEB_SDIO); card = sdio_get_drvdata(func); - lbs_stop_card(card->priv); + if (user_rmmod && (card->model == IF_SDIO_MODEL_8688)) { + /* + * FUNC_SHUTDOWN is required for SD8688 WLAN/BT + * multiple functions + */ + struct cmd_header cmd; + + memset(&cmd, 0, sizeof(cmd)); + + lbs_deb_sdio("send function SHUTDOWN command\n"); + if (__lbs_cmd(card->priv, CMD_FUNC_SHUTDOWN, + &cmd, sizeof(cmd), lbs_cmd_copyback, + (unsigned long) &cmd)) + lbs_pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n"); + } card->priv->surpriseremoved = 1; lbs_deb_sdio("call remove card\n"); + lbs_stop_card(card->priv); lbs_remove_card(card->priv); flush_workqueue(card->workqueue); destroy_workqueue(card->workqueue); sdio_claim_host(func); - - /* Disable interrupts */ - sdio_writeb(func, 0x00, IF_SDIO_H_INT_MASK, &ret); - sdio_release_irq(func); sdio_disable_func(func); - sdio_release_host(func); while (card->packets) { @@ -1116,6 +1143,9 @@ static int __init if_sdio_init_module(void) ret = sdio_register_driver(&if_sdio_driver); + /* Clear the flag in case user removes the card. */ + user_rmmod = 0; + lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); return ret; @@ -1123,22 +1153,10 @@ static int __init if_sdio_init_module(void) static void __exit if_sdio_exit_module(void) { - int i; - struct if_sdio_card *card; - lbs_deb_enter(LBS_DEB_SDIO); - for (i = 0; i < ARRAY_SIZE(if_sdio_models); i++) { - card = if_sdio_models[i].card; - - /* - * FUNC_SHUTDOWN is required for SD8688 WLAN/BT - * multiple functions - */ - if (card && card->priv) - card->priv->fn_shutdown_required = - (card->model == IF_SDIO_MODEL_8688) ? 1 : 0; - } + /* Set the flag as user is removing this module. */ + user_rmmod = 1; sdio_unregister_driver(&if_sdio_driver); diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index a58a123..89575e4 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -1002,17 +1002,9 @@ static int lbs_setup_firmware(struct lbs_private *priv) { int ret = -1; s16 curlevel = 0, minlevel = 0, maxlevel = 0; - struct cmd_header cmd; lbs_deb_enter(LBS_DEB_FW); - if (priv->fn_init_required) { - memset(&cmd, 0, sizeof(cmd)); - if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd), - lbs_cmd_copyback, (unsigned long) &cmd)) - lbs_pr_alert("CMD_FUNC_INIT command failed\n"); - } - /* Read MAC address from firmware */ memset(priv->current_addr, 0xff, ETH_ALEN); ret = lbs_update_hw_spec(priv); @@ -1200,9 +1192,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev) priv->mesh_open = 0; priv->infra_open = 0; - priv->fn_init_required = 0; - priv->fn_shutdown_required = 0; - /* Setup the OS Interface to our functions */ dev->netdev_ops = &lbs_netdev_ops; dev->watchdog_timeo = 5 * HZ; @@ -1384,20 +1373,11 @@ void lbs_stop_card(struct lbs_private *priv) struct net_device *dev; struct cmd_ctrl_node *cmdnode; unsigned long flags; - struct cmd_header cmd; lbs_deb_enter(LBS_DEB_MAIN); if (!priv) goto out; - - if (priv->fn_shutdown_required) { - memset(&cmd, 0, sizeof(cmd)); - if (__lbs_cmd(priv, CMD_FUNC_SHUTDOWN, &cmd, sizeof(cmd), - lbs_cmd_copyback, (unsigned long) &cmd)) - lbs_pr_alert("CMD_FUNC_SHUTDOWN command failed\n"); - } - dev = priv->dev; netif_stop_queue(dev); -- cgit v0.10.2 From 0f6399c4c525b518644a9b09f8d6fb125a418c4d Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Tue, 2 Jun 2009 00:05:04 -0400 Subject: nl80211: use GFP_ATOMIC for michael mic failure message nl80211_michael_mic_failure can be called in atomic context but does a GFP_KERNEL allocation. Fixes the error below: [ 126.793225] BUG: sleeping function called from invalid context at mm/slab.c:3055 [ 126.793234] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper [ 126.793241] 2 locks held by swapper/0: [ 126.793246] #0: (&sc->rxbuflock){+.-.+.}, at: [] ath5k_tasklet_rx+0x34/0x55e [ath5k] [ 126.793294] #1: (rcu_read_lock){.+.+.+}, at: [] __ieee80211_rx+0x7e/0x563 [mac80211] [ 126.793342] Pid: 0, comm: swapper Not tainted 2.6.30-rc7-wl #124 [ 126.793347] Call Trace: [ 126.793361] [] ? __debug_show_held_locks+0x1e/0x20 [ 126.793380] [] __might_sleep+0x100/0x107 [ 126.793386] [] kmem_cache_alloc+0x35/0x170 [ 126.793393] [] ? __alloc_skb+0x2e/0x117 [ 126.793397] [] ? mark_held_locks+0x43/0x5b [ 126.793402] [] __alloc_skb+0x2e/0x117 [ 126.793419] [] nl80211_michael_mic_failure+0x2a/0x1fa [cfg80211] [ 126.793425] [] ? trace_hardirqs_on_caller+0xf6/0x130 [ 126.793430] [] ? trace_hardirqs_on+0xb/0xd [ 126.793444] [] cfg80211_michael_mic_failure+0x30/0x38 [cfg80211] [ 126.793463] [] mac80211_ev_michael_mic_failure+0xfd/0x108 [mac80211] [ 126.793480] [] ieee80211_rx_h_michael_mic_verify+0xd4/0x117 [mac80211] [ 126.793499] [] ieee80211_invoke_rx_handlers+0xdde/0x1963 [mac80211] [ 126.793505] [] ? sched_clock+0x3f/0x64 [ 126.793511] [] ? sched_clock+0x3f/0x64 [ 126.793516] [] ? trace_hardirqs_off+0xb/0xd [ 126.793521] [] ? sched_clock+0x3f/0x64 [ 126.793526] [] ? __lock_acquire+0x62c/0x1271 [ 126.793545] [] __ieee80211_rx_handle_packet+0x543/0x564 [mac80211] [ 126.793564] [] __ieee80211_rx+0x4e2/0x563 [mac80211] [ 126.793577] [] ath5k_tasklet_rx+0x4e4/0x55e [ath5k] [ 126.793583] [] ? restore_nocheck_notrace+0x0/0xe [ 126.793589] [] tasklet_action+0x92/0xe5 [ 126.793594] [] __do_softirq+0xb1/0x182 [ 126.793599] [] do_softirq+0x30/0x48 [ 126.793603] [] irq_exit+0x3d/0x74 [ 126.793609] [] do_IRQ+0x76/0x8c [ 126.793613] [] common_interrupt+0x2e/0x34 [ 126.793618] [] ? timer_list_show+0x277/0x939 [ 126.793630] [] ? acpi_idle_enter_bm+0x266/0x291 [processor] [ 126.793636] [] cpuidle_idle_call+0x6a/0x9c [ 126.793640] [] cpu_idle+0x53/0x87 [ 126.793645] [] rest_init+0x6c/0x6e [ 126.793651] [] start_kernel+0x286/0x28b [ 126.793656] [] __init_begin+0x37/0x3c Signed-off-by: Bob Copeland Signed-off-by: John W. Linville diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index fd392ff..2416856 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3871,7 +3871,7 @@ void nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev, struct sk_buff *msg; void *hdr; - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC); if (!msg) return; @@ -3895,7 +3895,7 @@ void nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev, return; } - genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_KERNEL); + genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC); return; nla_put_failure: -- cgit v0.10.2 From 19d337dff95cbf76edd3ad95c0cee2732c3e1ec5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 2 Jun 2009 13:01:37 +0200 Subject: rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins Signed-off-by: Henrique de Moraes Holschuh [thinkpad] Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index 40c3a3f..de941e3 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -1,571 +1,130 @@ -rfkill - RF switch subsystem support -==================================== +rfkill - RF kill switch support +=============================== -1 Introduction -2 Implementation details -3 Kernel driver guidelines -3.1 wireless device drivers -3.2 platform/switch drivers -3.3 input device drivers -4 Kernel API -5 Userspace support +1. Introduction +2. Implementation details +3. Kernel driver guidelines +4. Kernel API +5. Userspace support -1. Introduction: +1. Introduction -The rfkill switch subsystem exists to add a generic interface to circuitry that -can enable or disable the signal output of a wireless *transmitter* of any -type. By far, the most common use is to disable radio-frequency transmitters. +The rfkill subsystem provides a generic interface to disabling any radio +transmitter in the system. When a transmitter is blocked, it shall not +radiate any power. -Note that disabling the signal output means that the the transmitter is to be -made to not emit any energy when "blocked". rfkill is not about blocking data -transmissions, it is about blocking energy emission. +The subsystem also provides the ability to react on button presses and +disable all transmitters of a certain type (or all). This is intended for +situations where transmitters need to be turned off, for example on +aircraft. -The rfkill subsystem offers support for keys and switches often found on -laptops to enable wireless devices like WiFi and Bluetooth, so that these keys -and switches actually perform an action in all wireless devices of a given type -attached to the system. -The buttons to enable and disable the wireless transmitters are important in -situations where the user is for example using his laptop on a location where -radio-frequency transmitters _must_ be disabled (e.g. airplanes). -Because of this requirement, userspace support for the keys should not be made -mandatory. Because userspace might want to perform some additional smarter -tasks when the key is pressed, rfkill provides userspace the possibility to -take over the task to handle the key events. - -=============================================================================== -2: Implementation details +2. Implementation details The rfkill subsystem is composed of various components: the rfkill class, the rfkill-input module (an input layer handler), and some specific input layer events. -The rfkill class provides kernel drivers with an interface that allows them to -know when they should enable or disable a wireless network device transmitter. -This is enabled by the CONFIG_RFKILL Kconfig option. - -The rfkill class support makes sure userspace will be notified of all state -changes on rfkill devices through uevents. It provides a notification chain -for interested parties in the kernel to also get notified of rfkill state -changes in other drivers. It creates several sysfs entries which can be used -by userspace. See section "Userspace support". - -The rfkill-input module provides the kernel with the ability to implement a -basic response when the user presses a key or button (or toggles a switch) -related to rfkill functionality. It is an in-kernel implementation of default -policy of reacting to rfkill-related input events and neither mandatory nor -required for wireless drivers to operate. It is enabled by the -CONFIG_RFKILL_INPUT Kconfig option. - -rfkill-input is a rfkill-related events input layer handler. This handler will -listen to all rfkill key events and will change the rfkill state of the -wireless devices accordingly. With this option enabled userspace could either -do nothing or simply perform monitoring tasks. - -The rfkill-input module also provides EPO (emergency power-off) functionality -for all wireless transmitters. This function cannot be overridden, and it is -always active. rfkill EPO is related to *_RFKILL_ALL input layer events. - - -Important terms for the rfkill subsystem: - -In order to avoid confusion, we avoid the term "switch" in rfkill when it is -referring to an electronic control circuit that enables or disables a -transmitter. We reserve it for the physical device a human manipulates -(which is an input device, by the way): - -rfkill switch: - - A physical device a human manipulates. Its state can be perceived by - the kernel either directly (through a GPIO pin, ACPI GPE) or by its - effect on a rfkill line of a wireless device. - -rfkill controller: - - A hardware circuit that controls the state of a rfkill line, which a - kernel driver can interact with *to modify* that state (i.e. it has - either write-only or read/write access). - -rfkill line: - - An input channel (hardware or software) of a wireless device, which - causes a wireless transmitter to stop emitting energy (BLOCK) when it - is active. Point of view is extremely important here: rfkill lines are - always seen from the PoV of a wireless device (and its driver). - -soft rfkill line/software rfkill line: - - A rfkill line the wireless device driver can directly change the state - of. Related to rfkill_state RFKILL_STATE_SOFT_BLOCKED. - -hard rfkill line/hardware rfkill line: - - A rfkill line that works fully in hardware or firmware, and that cannot - be overridden by the kernel driver. The hardware device or the - firmware just exports its status to the driver, but it is read-only. - Related to rfkill_state RFKILL_STATE_HARD_BLOCKED. - -The enum rfkill_state describes the rfkill state of a transmitter: - -When a rfkill line or rfkill controller is in the RFKILL_STATE_UNBLOCKED state, -the wireless transmitter (radio TX circuit for example) is *enabled*. When the -it is in the RFKILL_STATE_SOFT_BLOCKED or RFKILL_STATE_HARD_BLOCKED, the -wireless transmitter is to be *blocked* from operating. - -RFKILL_STATE_SOFT_BLOCKED indicates that a call to toggle_radio() can change -that state. RFKILL_STATE_HARD_BLOCKED indicates that a call to toggle_radio() -will not be able to change the state and will return with a suitable error if -attempts are made to set the state to RFKILL_STATE_UNBLOCKED. - -RFKILL_STATE_HARD_BLOCKED is used by drivers to signal that the device is -locked in the BLOCKED state by a hardwire rfkill line (typically an input pin -that, when active, forces the transmitter to be disabled) which the driver -CANNOT override. - -Full rfkill functionality requires two different subsystems to cooperate: the -input layer and the rfkill class. The input layer issues *commands* to the -entire system requesting that devices registered to the rfkill class change -state. The way this interaction happens is not complex, but it is not obvious -either: - -Kernel Input layer: - - * Generates KEY_WWAN, KEY_WLAN, KEY_BLUETOOTH, SW_RFKILL_ALL, and - other such events when the user presses certain keys, buttons, or - toggles certain physical switches. - - THE INPUT LAYER IS NEVER USED TO PROPAGATE STATUS, NOTIFICATIONS OR THE - KIND OF STUFF AN ON-SCREEN-DISPLAY APPLICATION WOULD REPORT. It is - used to issue *commands* for the system to change behaviour, and these - commands may or may not be carried out by some kernel driver or - userspace application. It follows that doing user feedback based only - on input events is broken, as there is no guarantee that an input event - will be acted upon. - - Most wireless communication device drivers implementing rfkill - functionality MUST NOT generate these events, and have no reason to - register themselves with the input layer. Doing otherwise is a common - misconception. There is an API to propagate rfkill status change - information, and it is NOT the input layer. - -rfkill class: - - * Calls a hook in a driver to effectively change the wireless - transmitter state; - * Keeps track of the wireless transmitter state (with help from - the driver); - * Generates userspace notifications (uevents) and a call to a - notification chain (kernel) when there is a wireless transmitter - state change; - * Connects a wireless communications driver with the common rfkill - control system, which, for example, allows actions such as - "switch all bluetooth devices offline" to be carried out by - userspace or by rfkill-input. - - THE RFKILL CLASS NEVER ISSUES INPUT EVENTS. THE RFKILL CLASS DOES - NOT LISTEN TO INPUT EVENTS. NO DRIVER USING THE RFKILL CLASS SHALL - EVER LISTEN TO, OR ACT ON RFKILL INPUT EVENTS. Doing otherwise is - a layering violation. - - Most wireless data communication drivers in the kernel have just to - implement the rfkill class API to work properly. Interfacing to the - input layer is not often required (and is very often a *bug*) on - wireless drivers. - - Platform drivers often have to attach to the input layer to *issue* - (but never to listen to) rfkill events for rfkill switches, and also to - the rfkill class to export a control interface for the platform rfkill - controllers to the rfkill subsystem. This does NOT mean the rfkill - switch is attached to a rfkill class (doing so is almost always wrong). - It just means the same kernel module is the driver for different - devices (rfkill switches and rfkill controllers). - - -Userspace input handlers (uevents) or kernel input handlers (rfkill-input): - - * Implements the policy of what should happen when one of the input - layer events related to rfkill operation is received. - * Uses the sysfs interface (userspace) or private rfkill API calls - to tell the devices registered with the rfkill class to change - their state (i.e. translates the input layer event into real - action). - - * rfkill-input implements EPO by handling EV_SW SW_RFKILL_ALL 0 - (power off all transmitters) in a special way: it ignores any - overrides and local state cache and forces all transmitters to the - RFKILL_STATE_SOFT_BLOCKED state (including those which are already - supposed to be BLOCKED). - * rfkill EPO will remain active until rfkill-input receives an - EV_SW SW_RFKILL_ALL 1 event. While the EPO is active, transmitters - are locked in the blocked state (rfkill will refuse to unblock them). - * rfkill-input implements different policies that the user can - select for handling EV_SW SW_RFKILL_ALL 1. It will unlock rfkill, - and either do nothing (leave transmitters blocked, but now unlocked), - restore the transmitters to their state before the EPO, or unblock - them all. - -Userspace uevent handler or kernel platform-specific drivers hooked to the -rfkill notifier chain: - - * Taps into the rfkill notifier chain or to KOBJ_CHANGE uevents, - in order to know when a device that is registered with the rfkill - class changes state; - * Issues feedback notifications to the user; - * In the rare platforms where this is required, synthesizes an input - event to command all *OTHER* rfkill devices to also change their - statues when a specific rfkill device changes state. - - -=============================================================================== -3: Kernel driver guidelines - -Remember: point-of-view is everything for a driver that connects to the rfkill -subsystem. All the details below must be measured/perceived from the point of -view of the specific driver being modified. - -The first thing one needs to know is whether his driver should be talking to -the rfkill class or to the input layer. In rare cases (platform drivers), it -could happen that you need to do both, as platform drivers often handle a -variety of devices in the same driver. - -Do not mistake input devices for rfkill controllers. The only type of "rfkill -switch" device that is to be registered with the rfkill class are those -directly controlling the circuits that cause a wireless transmitter to stop -working (or the software equivalent of them), i.e. what we call a rfkill -controller. Every other kind of "rfkill switch" is just an input device and -MUST NOT be registered with the rfkill class. - -A driver should register a device with the rfkill class when ALL of the -following conditions are met (they define a rfkill controller): - -1. The device is/controls a data communications wireless transmitter; - -2. The kernel can interact with the hardware/firmware to CHANGE the wireless - transmitter state (block/unblock TX operation); - -3. The transmitter can be made to not emit any energy when "blocked": - rfkill is not about blocking data transmissions, it is about blocking - energy emission; - -A driver should register a device with the input subsystem to issue -rfkill-related events (KEY_WLAN, KEY_BLUETOOTH, KEY_WWAN, KEY_WIMAX, -SW_RFKILL_ALL, etc) when ALL of the folowing conditions are met: - -1. It is directly related to some physical device the user interacts with, to - command the O.S./firmware/hardware to enable/disable a data communications - wireless transmitter. - - Examples of the physical device are: buttons, keys and switches the user - will press/touch/slide/switch to enable or disable the wireless - communication device. - -2. It is NOT slaved to another device, i.e. there is no other device that - issues rfkill-related input events in preference to this one. - - Please refer to the corner cases and examples section for more details. - -When in doubt, do not issue input events. For drivers that should generate -input events in some platforms, but not in others (e.g. b43), the best solution -is to NEVER generate input events in the first place. That work should be -deferred to a platform-specific kernel module (which will know when to generate -events through the rfkill notifier chain) or to userspace. This avoids the -usual maintenance problems with DMI whitelisting. - - -Corner cases and examples: -==================================== - -1. If the device is an input device that, because of hardware or firmware, -causes wireless transmitters to be blocked regardless of the kernel's will, it -is still just an input device, and NOT to be registered with the rfkill class. - -2. If the wireless transmitter switch control is read-only, it is an input -device and not to be registered with the rfkill class (and maybe not to be made -an input layer event source either, see below). - -3. If there is some other device driver *closer* to the actual hardware the -user interacted with (the button/switch/key) to issue an input event, THAT is -the device driver that should be issuing input events. - -E.g: - [RFKILL slider switch] -- [GPIO hardware] -- [WLAN card rf-kill input] - (platform driver) (wireless card driver) - -The user is closer to the RFKILL slide switch plaform driver, so the driver -which must issue input events is the platform driver looking at the GPIO -hardware, and NEVER the wireless card driver (which is just a slave). It is -very likely that there are other leaves than just the WLAN card rf-kill input -(e.g. a bluetooth card, etc)... - -On the other hand, some embedded devices do this: - - [RFKILL slider switch] -- [WLAN card rf-kill input] - (wireless card driver) - -In this situation, the wireless card driver *could* register itself as an input -device and issue rf-kill related input events... but in order to AVOID the need -for DMI whitelisting, the wireless card driver does NOT do it. Userspace (HAL) -or a platform driver (that exists only on these embedded devices) will do the -dirty job of issuing the input events. - - -COMMON MISTAKES in kernel drivers, related to rfkill: -==================================== - -1. NEVER confuse input device keys and buttons with input device switches. - - 1a. Switches are always set or reset. They report the current state - (on position or off position). - - 1b. Keys and buttons are either in the pressed or not-pressed state, and - that's it. A "button" that latches down when you press it, and - unlatches when you press it again is in fact a switch as far as input - devices go. - -Add the SW_* events you need for switches, do NOT try to emulate a button using -KEY_* events just because there is no such SW_* event yet. Do NOT try to use, -for example, KEY_BLUETOOTH when you should be using SW_BLUETOOTH instead. - -2. Input device switches (sources of EV_SW events) DO store their current state -(so you *must* initialize it by issuing a gratuitous input layer event on -driver start-up and also when resuming from sleep), and that state CAN be -queried from userspace through IOCTLs. There is no sysfs interface for this, -but that doesn't mean you should break things trying to hook it to the rfkill -class to get a sysfs interface :-) - -3. Do not issue *_RFKILL_ALL events by default, unless you are sure it is the -correct event for your switch/button. These events are emergency power-off -events when they are trying to turn the transmitters off. An example of an -input device which SHOULD generate *_RFKILL_ALL events is the wireless-kill -switch in a laptop which is NOT a hotkey, but a real sliding/rocker switch. -An example of an input device which SHOULD NOT generate *_RFKILL_ALL events by -default, is any sort of hot key that is type-specific (e.g. the one for WLAN). - - -3.1 Guidelines for wireless device drivers ------------------------------------------- - -(in this text, rfkill->foo means the foo field of struct rfkill). - -1. Each independent transmitter in a wireless device (usually there is only one -transmitter per device) should have a SINGLE rfkill class attached to it. - -2. If the device does not have any sort of hardware assistance to allow the -driver to rfkill the device, the driver should emulate it by taking all actions -required to silence the transmitter. - -3. If it is impossible to silence the transmitter (i.e. it still emits energy, -even if it is just in brief pulses, when there is no data to transmit and there -is no hardware support to turn it off) do NOT lie to the users. Do not attach -it to a rfkill class. The rfkill subsystem does not deal with data -transmission, it deals with energy emission. If the transmitter is emitting -energy, it is not blocked in rfkill terms. - -4. It doesn't matter if the device has multiple rfkill input lines affecting -the same transmitter, their combined state is to be exported as a single state -per transmitter (see rule 1). - -This rule exists because users of the rfkill subsystem expect to get (and set, -when possible) the overall transmitter rfkill state, not of a particular rfkill -line. +The rfkill class is provided for kernel drivers to register their radio +transmitter with the kernel, provide methods for turning it on and off and, +optionally, letting the system know about hardware-disabled states that may +be implemented on the device. This code is enabled with the CONFIG_RFKILL +Kconfig option, which drivers can "select". -5. The wireless device driver MUST NOT leave the transmitter enabled during -suspend and hibernation unless: +The rfkill class code also notifies userspace of state changes, this is +achieved via uevents. It also provides some sysfs files for userspace to +check the status of radio transmitters. See the "Userspace support" section +below. - 5.1. The transmitter has to be enabled for some sort of functionality - like wake-on-wireless-packet or autonomous packed forwarding in a mesh - network, and that functionality is enabled for this suspend/hibernation - cycle. -AND +The rfkill-input code implements a basic response to rfkill buttons -- it +implements turning on/off all devices of a certain class (or all). - 5.2. The device was not on a user-requested BLOCKED state before - the suspend (i.e. the driver must NOT unblock a device, not even - to support wake-on-wireless-packet or remain in the mesh). +When the device is hard-blocked (either by a call to rfkill_set_hw_state() +or from query_hw_block) set_block() will be invoked but drivers can well +ignore the method call since they can use the return value of the function +rfkill_set_hw_state() to sync the software state instead of keeping track +of calls to set_block(). -In other words, there is absolutely no allowed scenario where a driver can -automatically take action to unblock a rfkill controller (obviously, this deals -with scenarios where soft-blocking or both soft and hard blocking is happening. -Scenarios where hardware rfkill lines are the only ones blocking the -transmitter are outside of this rule, since the wireless device driver does not -control its input hardware rfkill lines in the first place). -6. During resume, rfkill will try to restore its previous state. +The entire functionality is spread over more than one subsystem: -7. After a rfkill class is suspended, it will *not* call rfkill->toggle_radio -until it is resumed. + * The kernel input layer generates KEY_WWAN, KEY_WLAN etc. and + SW_RFKILL_ALL -- when the user presses a button. Drivers for radio + transmitters generally do not register to the input layer, unless the + device really provides an input device (i.e. a button that has no + effect other than generating a button press event) + * The rfkill-input code hooks up to these events and switches the soft-block + of the various radio transmitters, depending on the button type. -Example of a WLAN wireless driver connected to the rfkill subsystem: --------------------------------------------------------------------- + * The rfkill drivers turn off/on their transmitters as requested. -A certain WLAN card has one input pin that causes it to block the transmitter -and makes the status of that input pin available (only for reading!) to the -kernel driver. This is a hard rfkill input line (it cannot be overridden by -the kernel driver). + * The rfkill class will generate userspace notifications (uevents) to tell + userspace what the current state is. -The card also has one PCI register that, if manipulated by the driver, causes -it to block the transmitter. This is a soft rfkill input line. -It has also a thermal protection circuitry that shuts down its transmitter if -the card overheats, and makes the status of that protection available (only for -reading!) to the kernel driver. This is also a hard rfkill input line. -If either one of these rfkill lines are active, the transmitter is blocked by -the hardware and forced offline. +3. Kernel driver guidelines -The driver should allocate and attach to its struct device *ONE* instance of -the rfkill class (there is only one transmitter). -It can implement the get_state() hook, and return RFKILL_STATE_HARD_BLOCKED if -either one of its two hard rfkill input lines are active. If the two hard -rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft -rfkill input line is active. Only if none of the rfkill input lines are -active, will it return RFKILL_STATE_UNBLOCKED. +Drivers for radio transmitters normally implement only the rfkill class. +These drivers may not unblock the transmitter based on own decisions, they +should act on information provided by the rfkill class only. -Since the device has a hardware rfkill line, it IS subject to state changes -external to rfkill. Therefore, the driver must make sure that it calls -rfkill_force_state() to keep the status always up-to-date, and it must do a -rfkill_force_state() on resume from sleep. +Platform drivers might implement input devices if the rfkill button is just +that, a button. If that button influences the hardware then you need to +implement an rfkill class instead. This also applies if the platform provides +a way to turn on/off the transmitter(s). -Every time the driver gets a notification from the card that one of its rfkill -lines changed state (polling might be needed on badly designed cards that don't -generate interrupts for such events), it recomputes the rfkill state as per -above, and calls rfkill_force_state() to update it. +During suspend/hibernation, transmitters should only be left enabled when +wake-on wlan or similar functionality requires it and the device wasn't +blocked before suspend/hibernate. Note that it may be necessary to update +the rfkill subsystem's idea of what the current state is at resume time if +the state may have changed over suspend. -The driver should implement the toggle_radio() hook, that: -1. Returns an error if one of the hardware rfkill lines are active, and the -caller asked for RFKILL_STATE_UNBLOCKED. -2. Activates the soft rfkill line if the caller asked for state -RFKILL_STATE_SOFT_BLOCKED. It should do this even if one of the hard rfkill -lines are active, effectively double-blocking the transmitter. - -3. Deactivates the soft rfkill line if none of the hardware rfkill lines are -active and the caller asked for RFKILL_STATE_UNBLOCKED. - -=============================================================================== -4: Kernel API +4. Kernel API To build a driver with rfkill subsystem support, the driver should depend on -(or select) the Kconfig symbol RFKILL; it should _not_ depend on RKFILL_INPUT. +(or select) the Kconfig symbol RFKILL. The hardware the driver talks to may be write-only (where the current state of the hardware is unknown), or read-write (where the hardware can be queried about its current state). -The rfkill class will call the get_state hook of a device every time it needs -to know the *real* current state of the hardware. This can happen often, but -it does not do any polling, so it is not enough on hardware that is subject -to state changes outside of the rfkill subsystem. - -Therefore, calling rfkill_force_state() when a state change happens is -mandatory when the device has a hardware rfkill line, or when something else -like the firmware could cause its state to be changed without going through the -rfkill class. - -Some hardware provides events when its status changes. In these cases, it is -best for the driver to not provide a get_state hook, and instead register the -rfkill class *already* with the correct status, and keep it updated using -rfkill_force_state() when it gets an event from the hardware. - -rfkill_force_state() must be used on the device resume handlers to update the -rfkill status, should there be any chance of the device status changing during -the sleep. - -There is no provision for a statically-allocated rfkill struct. You must -use rfkill_allocate() to allocate one. - -You should: - - rfkill_allocate() - - modify rfkill fields (flags, name) - - modify state to the current hardware state (THIS IS THE ONLY TIME - YOU CAN ACCESS state DIRECTLY) - - rfkill_register() +Calling rfkill_set_hw_state() when a state change happens is required from +rfkill drivers that control devices that can be hard-blocked unless they also +assign the poll_hw_block() callback (then the rfkill core will poll the +device). Don't do this unless you cannot get the event in any other way. -The only way to set a device to the RFKILL_STATE_HARD_BLOCKED state is through -a suitable return of get_state() or through rfkill_force_state(). -When a device is in the RFKILL_STATE_HARD_BLOCKED state, the only way to switch -it to a different state is through a suitable return of get_state() or through -rfkill_force_state(). -If toggle_radio() is called to set a device to state RFKILL_STATE_SOFT_BLOCKED -when that device is already at the RFKILL_STATE_HARD_BLOCKED state, it should -not return an error. Instead, it should try to double-block the transmitter, -so that its state will change from RFKILL_STATE_HARD_BLOCKED to -RFKILL_STATE_SOFT_BLOCKED should the hardware blocking cease. - -Please refer to the source for more documentation. - -=============================================================================== -5: Userspace support - -rfkill devices issue uevents (with an action of "change"), with the following -environment variables set: - -RFKILL_NAME -RFKILL_STATE -RFKILL_TYPE +5. Userspace support -The ABI for these variables is defined by the sysfs attributes. It is best -to take a quick look at the source to make sure of the possible values. - -It is expected that HAL will trap those, and bridge them to DBUS, etc. These -events CAN and SHOULD be used to give feedback to the user about the rfkill -status of the system. - -Input devices may issue events that are related to rfkill. These are the -various KEY_* events and SW_* events supported by rfkill-input.c. - -Userspace may not change the state of an rfkill switch in response to an -input event, it should refrain from changing states entirely. - -Userspace cannot assume it is the only source of control for rfkill switches. -Their state can change due to firmware actions, direct user actions, and the -rfkill-input EPO override for *_RFKILL_ALL. - -When rfkill-input is not active, userspace must initiate a rfkill status -change by writing to the "state" attribute in order for anything to happen. - -Take particular care to implement EV_SW SW_RFKILL_ALL properly. When that -switch is set to OFF, *every* rfkill device *MUST* be immediately put into the -RFKILL_STATE_SOFT_BLOCKED state, no questions asked. - -The following sysfs entries will be created: +The following sysfs entries exist for every rfkill device: name: Name assigned by driver to this key (interface or driver name). type: Name of the key type ("wlan", "bluetooth", etc). state: Current state of the transmitter 0: RFKILL_STATE_SOFT_BLOCKED - transmitter is forced off, but one can override it - by a write to the state attribute; + transmitter is turned off by software 1: RFKILL_STATE_UNBLOCKED - transmiter is NOT forced off, and may operate if - all other conditions for such operation are met - (such as interface is up and configured, etc); + transmiter is (potentially) active 2: RFKILL_STATE_HARD_BLOCKED transmitter is forced off by something outside of - the driver's control. One cannot set a device to - this state through writes to the state attribute; - claim: 1: Userspace handles events, 0: Kernel handles events - -Both the "state" and "claim" entries are also writable. For the "state" entry -this means that when 1 or 0 is written, the device rfkill state (if not yet in -the requested state), will be will be toggled accordingly. - -For the "claim" entry writing 1 to it means that the kernel no longer handles -key events even though RFKILL_INPUT input was enabled. When "claim" has been -set to 0, userspace should make sure that it listens for the input events or -check the sysfs "state" entry regularly to correctly perform the required tasks -when the rkfill key is pressed. - -A note about input devices and EV_SW events: - -In order to know the current state of an input device switch (like -SW_RFKILL_ALL), you will need to use an IOCTL. That information is not -available through sysfs in a generic way at this time, and it is not available -through the rfkill class AT ALL. + the driver's control. + claim: 0: Kernel handles events (currently always reads that value) + +rfkill devices also issue uevents (with an action of "change"), with the +following environment variables set: + +RFKILL_NAME +RFKILL_STATE +RFKILL_TYPE + +The contents of these variables corresponds to the "name", "state" and +"type" sysfs files explained above. diff --git a/MAINTAINERS b/MAINTAINERS index e18baa4..2f6a8fc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4753,9 +4753,9 @@ S: Supported F: fs/reiserfs/ RFKILL -P: Ivo van Doorn -M: IvDoorn@gmail.com -L: netdev@vger.kernel.org +P: Johannes Berg +M: johannes@sipsolutions.net +L: linux-wireless@vger.kernel.org S: Maintained F Documentation/rfkill.txt F: net/rfkill/ diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c index bde42aa..c31e601 100644 --- a/arch/arm/mach-pxa/tosa-bt.c +++ b/arch/arm/mach-pxa/tosa-bt.c @@ -35,21 +35,25 @@ static void tosa_bt_off(struct tosa_bt_data *data) gpio_set_value(data->gpio_reset, 0); } -static int tosa_bt_toggle_radio(void *data, enum rfkill_state state) +static int tosa_bt_set_block(void *data, bool blocked) { - pr_info("BT_RADIO going: %s\n", - state == RFKILL_STATE_UNBLOCKED ? "on" : "off"); + pr_info("BT_RADIO going: %s\n", blocked ? "off" : "on"); - if (state == RFKILL_STATE_UNBLOCKED) { + if (!blocked) { pr_info("TOSA_BT: going ON\n"); tosa_bt_on(data); } else { pr_info("TOSA_BT: going OFF\n"); tosa_bt_off(data); } + return 0; } +static const struct rfkill_ops tosa_bt_rfkill_ops = { + .set_block = tosa_bt_set_block, +}; + static int tosa_bt_probe(struct platform_device *dev) { int rc; @@ -70,18 +74,14 @@ static int tosa_bt_probe(struct platform_device *dev) if (rc) goto err_pwr_dir; - rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH); + rfk = rfkill_alloc("tosa-bt", &dev->dev, RFKILL_TYPE_BLUETOOTH, + &tosa_bt_rfkill_ops, data); if (!rfk) { rc = -ENOMEM; goto err_rfk_alloc; } - rfk->name = "tosa-bt"; - rfk->toggle_radio = tosa_bt_toggle_radio; - rfk->data = data; -#ifdef CONFIG_RFKILL_LEDS - rfk->led_trigger.name = "tosa-bt"; -#endif + rfkill_set_led_trigger_name(rfk, "tosa-bt"); rc = rfkill_register(rfk); if (rc) @@ -92,9 +92,7 @@ static int tosa_bt_probe(struct platform_device *dev) return 0; err_rfkill: - if (rfk) - rfkill_free(rfk); - rfk = NULL; + rfkill_destroy(rfk); err_rfk_alloc: tosa_bt_off(data); err_pwr_dir: @@ -113,8 +111,10 @@ static int __devexit tosa_bt_remove(struct platform_device *dev) platform_set_drvdata(dev, NULL); - if (rfk) + if (rfk) { rfkill_unregister(rfk); + rfkill_destroy(rfk); + } rfk = NULL; tosa_bt_off(data); diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index afac5b6..58ce807 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 837135f..5ddd8c4 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2481,10 +2481,10 @@ static int add_net_device(struct hso_device *hso_dev) return 0; } -static int hso_radio_toggle(void *data, enum rfkill_state state) +static int hso_rfkill_set_block(void *data, bool blocked) { struct hso_device *hso_dev = data; - int enabled = (state == RFKILL_STATE_UNBLOCKED); + int enabled = !blocked; int rv; mutex_lock(&hso_dev->mutex); @@ -2498,6 +2498,10 @@ static int hso_radio_toggle(void *data, enum rfkill_state state) return rv; } +static const struct rfkill_ops hso_rfkill_ops = { + .set_block = hso_rfkill_set_block, +}; + /* Creates and sets up everything for rfkill */ static void hso_create_rfkill(struct hso_device *hso_dev, struct usb_interface *interface) @@ -2506,29 +2510,25 @@ static void hso_create_rfkill(struct hso_device *hso_dev, struct device *dev = &hso_net->net->dev; char *rfkn; - hso_net->rfkill = rfkill_allocate(&interface_to_usbdev(interface)->dev, - RFKILL_TYPE_WWAN); - if (!hso_net->rfkill) { - dev_err(dev, "%s - Out of memory\n", __func__); - return; - } rfkn = kzalloc(20, GFP_KERNEL); - if (!rfkn) { - rfkill_free(hso_net->rfkill); - hso_net->rfkill = NULL; + if (!rfkn) dev_err(dev, "%s - Out of memory\n", __func__); - return; - } + snprintf(rfkn, 20, "hso-%d", interface->altsetting->desc.bInterfaceNumber); - hso_net->rfkill->name = rfkn; - hso_net->rfkill->state = RFKILL_STATE_UNBLOCKED; - hso_net->rfkill->data = hso_dev; - hso_net->rfkill->toggle_radio = hso_radio_toggle; + + hso_net->rfkill = rfkill_alloc(rfkn, + &interface_to_usbdev(interface)->dev, + RFKILL_TYPE_WWAN, + &hso_rfkill_ops, hso_dev); + if (!hso_net->rfkill) { + dev_err(dev, "%s - Out of memory\n", __func__); + kfree(rfkn); + return; + } if (rfkill_register(hso_net->rfkill) < 0) { + rfkill_destroy(hso_net->rfkill); kfree(rfkn); - hso_net->rfkill->name = NULL; - rfkill_free(hso_net->rfkill); hso_net->rfkill = NULL; dev_err(dev, "%s - Failed to register rfkill\n", __func__); return; @@ -3165,8 +3165,10 @@ static void hso_free_interface(struct usb_interface *interface) hso_stop_net_device(network_table[i]); cancel_work_sync(&network_table[i]->async_put_intf); cancel_work_sync(&network_table[i]->async_get_intf); - if (rfk) + if (rfk) { rfkill_unregister(rfk); + rfkill_destroy(rfk); + } hso_free_net_device(network_table[i]); } } diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 796a3ad..515880a 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -460,12 +460,9 @@ struct ath_led { bool registered; }; -/* Rfkill */ -#define ATH_RFKILL_POLL_INTERVAL 2000 /* msecs */ - struct ath_rfkill { struct rfkill *rfkill; - struct delayed_work rfkill_poll; + struct rfkill_ops ops; char rfkill_name[32]; }; @@ -509,8 +506,6 @@ struct ath_rfkill { #define SC_OP_RXFLUSH BIT(7) #define SC_OP_LED_ASSOCIATED BIT(8) #define SC_OP_RFKILL_REGISTERED BIT(9) -#define SC_OP_RFKILL_SW_BLOCKED BIT(10) -#define SC_OP_RFKILL_HW_BLOCKED BIT(11) #define SC_OP_WAIT_FOR_BEACON BIT(12) #define SC_OP_LED_ON BIT(13) #define SC_OP_SCANNING BIT(14) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 61da08a..f7baa40 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1192,120 +1192,69 @@ static bool ath_is_rfkill_set(struct ath_softc *sc) ah->rfkill_polarity; } -/* h/w rfkill poll function */ -static void ath_rfkill_poll(struct work_struct *work) +/* s/w rfkill handlers */ +static int ath_rfkill_set_block(void *data, bool blocked) { - struct ath_softc *sc = container_of(work, struct ath_softc, - rf_kill.rfkill_poll.work); - bool radio_on; - - if (sc->sc_flags & SC_OP_INVALID) - return; - - radio_on = !ath_is_rfkill_set(sc); - - /* - * enable/disable radio only when there is a - * state change in RF switch - */ - if (radio_on == !!(sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED)) { - enum rfkill_state state; - - if (sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED) { - state = radio_on ? RFKILL_STATE_SOFT_BLOCKED - : RFKILL_STATE_HARD_BLOCKED; - } else if (radio_on) { - ath_radio_enable(sc); - state = RFKILL_STATE_UNBLOCKED; - } else { - ath_radio_disable(sc); - state = RFKILL_STATE_HARD_BLOCKED; - } - - if (state == RFKILL_STATE_HARD_BLOCKED) - sc->sc_flags |= SC_OP_RFKILL_HW_BLOCKED; - else - sc->sc_flags &= ~SC_OP_RFKILL_HW_BLOCKED; + struct ath_softc *sc = data; - rfkill_force_state(sc->rf_kill.rfkill, state); - } + if (blocked) + ath_radio_disable(sc); + else + ath_radio_enable(sc); - queue_delayed_work(sc->hw->workqueue, &sc->rf_kill.rfkill_poll, - msecs_to_jiffies(ATH_RFKILL_POLL_INTERVAL)); + return 0; } -/* s/w rfkill handler */ -static int ath_sw_toggle_radio(void *data, enum rfkill_state state) +static void ath_rfkill_poll_state(struct rfkill *rfkill, void *data) { struct ath_softc *sc = data; + bool blocked = !!ath_is_rfkill_set(sc); - switch (state) { - case RFKILL_STATE_SOFT_BLOCKED: - if (!(sc->sc_flags & (SC_OP_RFKILL_HW_BLOCKED | - SC_OP_RFKILL_SW_BLOCKED))) - ath_radio_disable(sc); - sc->sc_flags |= SC_OP_RFKILL_SW_BLOCKED; - return 0; - case RFKILL_STATE_UNBLOCKED: - if ((sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED)) { - sc->sc_flags &= ~SC_OP_RFKILL_SW_BLOCKED; - if (sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED) { - DPRINTF(sc, ATH_DBG_FATAL, "Can't turn on the" - "radio as it is disabled by h/w\n"); - return -EPERM; - } - ath_radio_enable(sc); - } - return 0; - default: - return -EINVAL; - } + if (rfkill_set_hw_state(rfkill, blocked)) + ath_radio_disable(sc); + else + ath_radio_enable(sc); } /* Init s/w rfkill */ static int ath_init_sw_rfkill(struct ath_softc *sc) { - sc->rf_kill.rfkill = rfkill_allocate(wiphy_dev(sc->hw->wiphy), - RFKILL_TYPE_WLAN); + sc->rf_kill.ops.set_block = ath_rfkill_set_block; + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + sc->rf_kill.ops.poll = ath_rfkill_poll_state; + + snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name), + "ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy)); + + sc->rf_kill.rfkill = rfkill_alloc(sc->rf_kill.rfkill_name, + wiphy_dev(sc->hw->wiphy), + RFKILL_TYPE_WLAN, + &sc->rf_kill.ops, sc); if (!sc->rf_kill.rfkill) { DPRINTF(sc, ATH_DBG_FATAL, "Failed to allocate rfkill\n"); return -ENOMEM; } - snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name), - "ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy)); - sc->rf_kill.rfkill->name = sc->rf_kill.rfkill_name; - sc->rf_kill.rfkill->data = sc; - sc->rf_kill.rfkill->toggle_radio = ath_sw_toggle_radio; - sc->rf_kill.rfkill->state = RFKILL_STATE_UNBLOCKED; - return 0; } /* Deinitialize rfkill */ static void ath_deinit_rfkill(struct ath_softc *sc) { - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); - if (sc->sc_flags & SC_OP_RFKILL_REGISTERED) { rfkill_unregister(sc->rf_kill.rfkill); + rfkill_destroy(sc->rf_kill.rfkill); sc->sc_flags &= ~SC_OP_RFKILL_REGISTERED; - sc->rf_kill.rfkill = NULL; } } static int ath_start_rfkill_poll(struct ath_softc *sc) { - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - queue_delayed_work(sc->hw->workqueue, - &sc->rf_kill.rfkill_poll, 0); - if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) { if (rfkill_register(sc->rf_kill.rfkill)) { DPRINTF(sc, ATH_DBG_FATAL, "Unable to register rfkill\n"); - rfkill_free(sc->rf_kill.rfkill); + rfkill_destroy(sc->rf_kill.rfkill); /* Deinitialize the device */ ath_cleanup(sc); @@ -1678,10 +1627,6 @@ int ath_attach(u16 devid, struct ath_softc *sc) goto error_attach; #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - /* Initialze h/w Rfkill */ - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll); - /* Initialize s/w rfkill */ error = ath_init_sw_rfkill(sc); if (error) @@ -2214,10 +2159,8 @@ static void ath9k_stop(struct ieee80211_hw *hw) } else sc->rx.rxlink = NULL; -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); -#endif + rfkill_pause_polling(sc->rf_kill.rfkill); + /* disable HAL and put h/w to sleep */ ath9k_hw_disable(sc->sc_ah); ath9k_hw_configpcipowersave(sc->sc_ah, 1); diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 168411d..ccdf20a 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -227,11 +227,6 @@ static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state) ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); -#endif - pci_save_state(pdev); pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); @@ -256,16 +251,6 @@ static int ath_pci_resume(struct pci_dev *pdev) AR_GPIO_OUTPUT_MUX_AS_OUTPUT); ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - /* - * check the h/w rfkill state on resume - * and start the rfkill poll timer - */ - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - queue_delayed_work(sc->hw->workqueue, - &sc->rf_kill.rfkill_poll, 0); -#endif - return 0; } diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 21572e4..07a99e3 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -102,7 +102,7 @@ config B43_LEDS # if it's possible. config B43_RFKILL bool - depends on B43 && (RFKILL = y || RFKILL = B43) && RFKILL_INPUT && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43) + depends on B43 && (RFKILL = y || RFKILL = B43) default y # This config option automatically enables b43 HW-RNG support, diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c index 76f4c7b..9a498d3 100644 --- a/drivers/net/wireless/b43/leds.c +++ b/drivers/net/wireless/b43/leds.c @@ -87,7 +87,7 @@ static void b43_led_brightness_set(struct led_classdev *led_dev, } static int b43_register_led(struct b43_wldev *dev, struct b43_led *led, - const char *name, char *default_trigger, + const char *name, const char *default_trigger, u8 led_index, bool activelow) { int err; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index cb4a871..1d3e400 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3470,7 +3470,7 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed) if (!!conf->radio_enabled != phy->radio_on) { if (conf->radio_enabled) { - b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED); + b43_software_rfkill(dev, false); b43info(dev->wl, "Radio turned on by software\n"); if (!dev->radio_hw_enable) { b43info(dev->wl, "The hardware RF-kill button " @@ -3478,7 +3478,7 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed) "Press the button to turn it on.\n"); } } else { - b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); + b43_software_rfkill(dev, true); b43info(dev->wl, "Radio turned off by software\n"); } } diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c index c836c07..816e028 100644 --- a/drivers/net/wireless/b43/phy_a.c +++ b/drivers/net/wireless/b43/phy_a.c @@ -480,11 +480,11 @@ static bool b43_aphy_op_supports_hwpctl(struct b43_wldev *dev) } static void b43_aphy_op_software_rfkill(struct b43_wldev *dev, - enum rfkill_state state) + bool blocked) { struct b43_phy *phy = &dev->phy; - if (state == RFKILL_STATE_UNBLOCKED) { + if (!blocked) { if (phy->radio_on) return; b43_radio_write16(dev, 0x0004, 0x00C0); diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c index e176b6e..6d24162 100644 --- a/drivers/net/wireless/b43/phy_common.c +++ b/drivers/net/wireless/b43/phy_common.c @@ -84,7 +84,7 @@ int b43_phy_init(struct b43_wldev *dev) phy->channel = ops->get_default_chan(dev); - ops->software_rfkill(dev, RFKILL_STATE_UNBLOCKED); + ops->software_rfkill(dev, false); err = ops->init(dev); if (err) { b43err(dev->wl, "PHY init failed\n"); @@ -104,7 +104,7 @@ err_phy_exit: if (ops->exit) ops->exit(dev); err_block_rf: - ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); + ops->software_rfkill(dev, true); return err; } @@ -113,7 +113,7 @@ void b43_phy_exit(struct b43_wldev *dev) { const struct b43_phy_operations *ops = dev->phy.ops; - ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); + ops->software_rfkill(dev, true); if (ops->exit) ops->exit(dev); } @@ -295,18 +295,13 @@ err_restore_cookie: return err; } -void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state) +void b43_software_rfkill(struct b43_wldev *dev, bool blocked) { struct b43_phy *phy = &dev->phy; - if (state == RFKILL_STATE_HARD_BLOCKED) { - /* We cannot hardware-block the device */ - state = RFKILL_STATE_SOFT_BLOCKED; - } - b43_mac_suspend(dev); - phy->ops->software_rfkill(dev, state); - phy->radio_on = (state == RFKILL_STATE_UNBLOCKED); + phy->ops->software_rfkill(dev, blocked); + phy->radio_on = !blocked; b43_mac_enable(dev); } diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h index b2d9910..f4c2d79 100644 --- a/drivers/net/wireless/b43/phy_common.h +++ b/drivers/net/wireless/b43/phy_common.h @@ -159,7 +159,7 @@ struct b43_phy_operations { /* Radio */ bool (*supports_hwpctl)(struct b43_wldev *dev); - void (*software_rfkill)(struct b43_wldev *dev, enum rfkill_state state); + void (*software_rfkill)(struct b43_wldev *dev, bool blocked); void (*switch_analog)(struct b43_wldev *dev, bool on); int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel); unsigned int (*get_default_chan)(struct b43_wldev *dev); @@ -364,7 +364,7 @@ int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel); /** * b43_software_rfkill - Turn the radio ON or OFF in software. */ -void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state); +void b43_software_rfkill(struct b43_wldev *dev, bool blocked); /** * b43_phy_txpower_check - Check TX power output. diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c index e7b98f0..5300232 100644 --- a/drivers/net/wireless/b43/phy_g.c +++ b/drivers/net/wireless/b43/phy_g.c @@ -2592,7 +2592,7 @@ static bool b43_gphy_op_supports_hwpctl(struct b43_wldev *dev) } static void b43_gphy_op_software_rfkill(struct b43_wldev *dev, - enum rfkill_state state) + bool blocked) { struct b43_phy *phy = &dev->phy; struct b43_phy_g *gphy = phy->g; @@ -2600,7 +2600,7 @@ static void b43_gphy_op_software_rfkill(struct b43_wldev *dev, might_sleep(); - if (state == RFKILL_STATE_UNBLOCKED) { + if (!blocked) { /* Turn radio ON */ if (phy->radio_on) return; diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c index 58e319d..ea0d3a3 100644 --- a/drivers/net/wireless/b43/phy_lp.c +++ b/drivers/net/wireless/b43/phy_lp.c @@ -488,7 +488,7 @@ static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) } static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev, - enum rfkill_state state) + bool blocked) { //TODO } diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 8bcfda5..be7b560 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -579,7 +579,7 @@ static void b43_nphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) } static void b43_nphy_op_software_rfkill(struct b43_wldev *dev, - enum rfkill_state state) + bool blocked) {//TODO } diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 9e1d00b..9604784 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -45,12 +45,11 @@ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev) } /* The poll callback for the hardware button. */ -static void b43_rfkill_poll(struct input_polled_dev *poll_dev) +static void b43_rfkill_poll(struct rfkill *rfkill, void *data) { - struct b43_wldev *dev = poll_dev->private; + struct b43_wldev *dev = data; struct b43_wl *wl = dev->wl; bool enabled; - bool report_change = 0; mutex_lock(&wl->mutex); if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) { @@ -60,68 +59,55 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) enabled = b43_is_hw_radio_enabled(dev); if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; - report_change = 1; b43info(wl, "Radio hardware status changed to %s\n", enabled ? "ENABLED" : "DISABLED"); + enabled = !rfkill_set_hw_state(rfkill, !enabled); + if (enabled != dev->phy.radio_on) + b43_software_rfkill(dev, !enabled); } mutex_unlock(&wl->mutex); - - /* send the radio switch event to the system - note both a key press - * and a release are required */ - if (unlikely(report_change)) { - input_report_key(poll_dev->input, KEY_WLAN, 1); - input_report_key(poll_dev->input, KEY_WLAN, 0); - } } /* Called when the RFKILL toggled in software. */ -static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) +static int b43_rfkill_soft_set(void *data, bool blocked) { struct b43_wldev *dev = data; struct b43_wl *wl = dev->wl; - int err = -EBUSY; + int err = -EINVAL; - if (!wl->rfkill.registered) - return 0; + if (WARN_ON(!wl->rfkill.registered)) + return -EINVAL; mutex_lock(&wl->mutex); + if (b43_status(dev) < B43_STAT_INITIALIZED) goto out_unlock; + + if (!dev->radio_hw_enable) + goto out_unlock; + + if (!blocked != dev->phy.radio_on) + b43_software_rfkill(dev, blocked); err = 0; - switch (state) { - case RFKILL_STATE_UNBLOCKED: - if (!dev->radio_hw_enable) { - /* No luck. We can't toggle the hardware RF-kill - * button from software. */ - err = -EBUSY; - goto out_unlock; - } - if (!dev->phy.radio_on) - b43_software_rfkill(dev, state); - break; - case RFKILL_STATE_SOFT_BLOCKED: - if (dev->phy.radio_on) - b43_software_rfkill(dev, state); - break; - default: - b43warn(wl, "Received unexpected rfkill state %d.\n", state); - break; - } out_unlock: mutex_unlock(&wl->mutex); - return err; } -char *b43_rfkill_led_name(struct b43_wldev *dev) +const char *b43_rfkill_led_name(struct b43_wldev *dev) { struct b43_rfkill *rfk = &(dev->wl->rfkill); if (!rfk->registered) return NULL; - return rfkill_get_led_name(rfk->rfkill); + return rfkill_get_led_trigger_name(rfk->rfkill); } +static const struct rfkill_ops b43_rfkill_ops = { + .set_block = b43_rfkill_soft_set, + .poll = b43_rfkill_poll, +}; + void b43_rfkill_init(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; @@ -130,65 +116,26 @@ void b43_rfkill_init(struct b43_wldev *dev) rfk->registered = 0; - rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN); - if (!rfk->rfkill) - goto out_error; snprintf(rfk->name, sizeof(rfk->name), "b43-%s", wiphy_name(wl->hw->wiphy)); - rfk->rfkill->name = rfk->name; - rfk->rfkill->state = RFKILL_STATE_UNBLOCKED; - rfk->rfkill->data = dev; - rfk->rfkill->toggle_radio = b43_rfkill_soft_toggle; - - rfk->poll_dev = input_allocate_polled_device(); - if (!rfk->poll_dev) { - rfkill_free(rfk->rfkill); - goto err_freed_rfk; - } - - rfk->poll_dev->private = dev; - rfk->poll_dev->poll = b43_rfkill_poll; - rfk->poll_dev->poll_interval = 1000; /* msecs */ - rfk->poll_dev->input->name = rfk->name; - rfk->poll_dev->input->id.bustype = BUS_HOST; - rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor; - rfk->poll_dev->input->evbit[0] = BIT(EV_KEY); - set_bit(KEY_WLAN, rfk->poll_dev->input->keybit); + rfk->rfkill = rfkill_alloc(rfk->name, + dev->dev->dev, + RFKILL_TYPE_WLAN, + &b43_rfkill_ops, dev); + if (!rfk->rfkill) + goto out_error; err = rfkill_register(rfk->rfkill); if (err) - goto err_free_polldev; - -#ifdef CONFIG_RFKILL_INPUT_MODULE - /* B43 RF-kill isn't useful without the rfkill-input subsystem. - * Try to load the module. */ - err = request_module("rfkill-input"); - if (err) - b43warn(wl, "Failed to load the rfkill-input module. " - "The built-in radio LED will not work.\n"); -#endif /* CONFIG_RFKILL_INPUT */ - -#if !defined(CONFIG_RFKILL_INPUT) && !defined(CONFIG_RFKILL_INPUT_MODULE) - b43warn(wl, "The rfkill-input subsystem is not available. " - "The built-in radio LED will not work.\n"); -#endif - - err = input_register_polled_device(rfk->poll_dev); - if (err) - goto err_unreg_rfk; + goto err_free; rfk->registered = 1; return; -err_unreg_rfk: - rfkill_unregister(rfk->rfkill); -err_free_polldev: - input_free_polled_device(rfk->poll_dev); - rfk->poll_dev = NULL; -err_freed_rfk: - rfk->rfkill = NULL; -out_error: + err_free: + rfkill_destroy(rfk->rfkill); + out_error: rfk->registered = 0; b43warn(wl, "RF-kill button init failed\n"); } @@ -201,9 +148,7 @@ void b43_rfkill_exit(struct b43_wldev *dev) return; rfk->registered = 0; - input_unregister_polled_device(rfk->poll_dev); rfkill_unregister(rfk->rfkill); - input_free_polled_device(rfk->poll_dev); - rfk->poll_dev = NULL; + rfkill_destroy(rfk->rfkill); rfk->rfkill = NULL; } diff --git a/drivers/net/wireless/b43/rfkill.h b/drivers/net/wireless/b43/rfkill.h index adacf93..da497e0 100644 --- a/drivers/net/wireless/b43/rfkill.h +++ b/drivers/net/wireless/b43/rfkill.h @@ -7,14 +7,11 @@ struct b43_wldev; #ifdef CONFIG_B43_RFKILL #include -#include struct b43_rfkill { /* The RFKILL subsystem data structure */ struct rfkill *rfkill; - /* The poll device for the RFKILL input button */ - struct input_polled_dev *poll_dev; /* Did initialization succeed? Used for freeing. */ bool registered; /* The unique name of this rfkill switch */ @@ -26,7 +23,7 @@ struct b43_rfkill { void b43_rfkill_init(struct b43_wldev *dev); void b43_rfkill_exit(struct b43_wldev *dev); -char * b43_rfkill_led_name(struct b43_wldev *dev); +const char *b43_rfkill_led_name(struct b43_wldev *dev); #else /* CONFIG_B43_RFKILL */ diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig index d4f628a..6893f43 100644 --- a/drivers/net/wireless/b43legacy/Kconfig +++ b/drivers/net/wireless/b43legacy/Kconfig @@ -47,7 +47,7 @@ config B43LEGACY_LEDS # if it's possible. config B43LEGACY_RFKILL bool - depends on B43LEGACY && (RFKILL = y || RFKILL = B43LEGACY) && RFKILL_INPUT && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43LEGACY) + depends on B43LEGACY && (RFKILL = y || RFKILL = B43LEGACY) default y # This config option automatically enables b43 HW-RNG support, diff --git a/drivers/net/wireless/b43legacy/leds.c b/drivers/net/wireless/b43legacy/leds.c index 3ea55b1..538d311 100644 --- a/drivers/net/wireless/b43legacy/leds.c +++ b/drivers/net/wireless/b43legacy/leds.c @@ -86,7 +86,8 @@ static void b43legacy_led_brightness_set(struct led_classdev *led_dev, static int b43legacy_register_led(struct b43legacy_wldev *dev, struct b43legacy_led *led, - const char *name, char *default_trigger, + const char *name, + const char *default_trigger, u8 led_index, bool activelow) { int err; diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c index 4b0c7d2..c6230a6 100644 --- a/drivers/net/wireless/b43legacy/rfkill.c +++ b/drivers/net/wireless/b43legacy/rfkill.c @@ -45,12 +45,11 @@ static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev) } /* The poll callback for the hardware button. */ -static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev) +static void b43legacy_rfkill_poll(struct rfkill *rfkill, void *data) { - struct b43legacy_wldev *dev = poll_dev->private; + struct b43legacy_wldev *dev = data; struct b43legacy_wl *wl = dev->wl; bool enabled; - bool report_change = 0; mutex_lock(&wl->mutex); if (unlikely(b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)) { @@ -60,71 +59,64 @@ static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev) enabled = b43legacy_is_hw_radio_enabled(dev); if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; - report_change = 1; b43legacyinfo(wl, "Radio hardware status changed to %s\n", enabled ? "ENABLED" : "DISABLED"); + enabled = !rfkill_set_hw_state(rfkill, !enabled); + if (enabled != dev->phy.radio_on) { + if (enabled) + b43legacy_radio_turn_on(dev); + else + b43legacy_radio_turn_off(dev, 0); + } } mutex_unlock(&wl->mutex); - - /* send the radio switch event to the system - note both a key press - * and a release are required */ - if (unlikely(report_change)) { - input_report_key(poll_dev->input, KEY_WLAN, 1); - input_report_key(poll_dev->input, KEY_WLAN, 0); - } } /* Called when the RFKILL toggled in software. * This is called without locking. */ -static int b43legacy_rfkill_soft_toggle(void *data, enum rfkill_state state) +static int b43legacy_rfkill_soft_set(void *data, bool blocked) { struct b43legacy_wldev *dev = data; struct b43legacy_wl *wl = dev->wl; - int err = -EBUSY; + int ret = -EINVAL; if (!wl->rfkill.registered) - return 0; + return -EINVAL; mutex_lock(&wl->mutex); if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) goto out_unlock; - err = 0; - switch (state) { - case RFKILL_STATE_UNBLOCKED: - if (!dev->radio_hw_enable) { - /* No luck. We can't toggle the hardware RF-kill - * button from software. */ - err = -EBUSY; - goto out_unlock; - } - if (!dev->phy.radio_on) + + if (!dev->radio_hw_enable) + goto out_unlock; + + if (!blocked != dev->phy.radio_on) { + if (!blocked) b43legacy_radio_turn_on(dev); - break; - case RFKILL_STATE_SOFT_BLOCKED: - if (dev->phy.radio_on) + else b43legacy_radio_turn_off(dev, 0); - break; - default: - b43legacywarn(wl, "Received unexpected rfkill state %d.\n", - state); - break; } + ret = 0; out_unlock: mutex_unlock(&wl->mutex); - - return err; + return ret; } -char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev) +const char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev) { struct b43legacy_rfkill *rfk = &(dev->wl->rfkill); if (!rfk->registered) return NULL; - return rfkill_get_led_name(rfk->rfkill); + return rfkill_get_led_trigger_name(rfk->rfkill); } +static const struct rfkill_ops b43legacy_rfkill_ops = { + .set_block = b43legacy_rfkill_soft_set, + .poll = b43legacy_rfkill_poll, +}; + void b43legacy_rfkill_init(struct b43legacy_wldev *dev) { struct b43legacy_wl *wl = dev->wl; @@ -133,60 +125,25 @@ void b43legacy_rfkill_init(struct b43legacy_wldev *dev) rfk->registered = 0; - rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN); - if (!rfk->rfkill) - goto out_error; snprintf(rfk->name, sizeof(rfk->name), "b43legacy-%s", wiphy_name(wl->hw->wiphy)); - rfk->rfkill->name = rfk->name; - rfk->rfkill->state = RFKILL_STATE_UNBLOCKED; - rfk->rfkill->data = dev; - rfk->rfkill->toggle_radio = b43legacy_rfkill_soft_toggle; - - rfk->poll_dev = input_allocate_polled_device(); - if (!rfk->poll_dev) { - rfkill_free(rfk->rfkill); - goto err_freed_rfk; - } - - rfk->poll_dev->private = dev; - rfk->poll_dev->poll = b43legacy_rfkill_poll; - rfk->poll_dev->poll_interval = 1000; /* msecs */ - - rfk->poll_dev->input->name = rfk->name; - rfk->poll_dev->input->id.bustype = BUS_HOST; - rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor; - rfk->poll_dev->input->evbit[0] = BIT(EV_KEY); - set_bit(KEY_WLAN, rfk->poll_dev->input->keybit); + rfk->rfkill = rfkill_alloc(rfk->name, + dev->dev->dev, + RFKILL_TYPE_WLAN, + &b43legacy_rfkill_ops, dev); + if (!rfk->rfkill) + goto out_error; err = rfkill_register(rfk->rfkill); if (err) - goto err_free_polldev; - -#ifdef CONFIG_RFKILL_INPUT_MODULE - /* B43legacy RF-kill isn't useful without the rfkill-input subsystem. - * Try to load the module. */ - err = request_module("rfkill-input"); - if (err) - b43legacywarn(wl, "Failed to load the rfkill-input module." - "The built-in radio LED will not work.\n"); -#endif /* CONFIG_RFKILL_INPUT */ - - err = input_register_polled_device(rfk->poll_dev); - if (err) - goto err_unreg_rfk; + goto err_free; rfk->registered = 1; return; -err_unreg_rfk: - rfkill_unregister(rfk->rfkill); -err_free_polldev: - input_free_polled_device(rfk->poll_dev); - rfk->poll_dev = NULL; -err_freed_rfk: - rfk->rfkill = NULL; -out_error: + err_free: + rfkill_destroy(rfk->rfkill); + out_error: rfk->registered = 0; b43legacywarn(wl, "RF-kill button init failed\n"); } @@ -199,10 +156,8 @@ void b43legacy_rfkill_exit(struct b43legacy_wldev *dev) return; rfk->registered = 0; - input_unregister_polled_device(rfk->poll_dev); rfkill_unregister(rfk->rfkill); - input_free_polled_device(rfk->poll_dev); - rfk->poll_dev = NULL; + rfkill_destroy(rfk->rfkill); rfk->rfkill = NULL; } diff --git a/drivers/net/wireless/b43legacy/rfkill.h b/drivers/net/wireless/b43legacy/rfkill.h index 11150a8..adffc50 100644 --- a/drivers/net/wireless/b43legacy/rfkill.h +++ b/drivers/net/wireless/b43legacy/rfkill.h @@ -6,16 +6,12 @@ struct b43legacy_wldev; #ifdef CONFIG_B43LEGACY_RFKILL #include -#include -#include struct b43legacy_rfkill { /* The RFKILL subsystem data structure */ struct rfkill *rfkill; - /* The poll device for the RFKILL input button */ - struct input_polled_dev *poll_dev; /* Did initialization succeed? Used for freeing. */ bool registered; /* The unique name of this rfkill switch */ @@ -27,7 +23,7 @@ struct b43legacy_rfkill { void b43legacy_rfkill_init(struct b43legacy_wldev *dev); void b43legacy_rfkill_exit(struct b43legacy_wldev *dev); -char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev); +const char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev); #else /* CONFIG_B43LEGACY_RFKILL */ diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index 8304f64..6fe259f 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -5,15 +5,14 @@ config IWLWIFI select FW_LOADER select MAC80211_LEDS if IWLWIFI_LEDS select LEDS_CLASS if IWLWIFI_LEDS - select RFKILL if IWLWIFI_RFKILL config IWLWIFI_LEDS bool "Enable LED support in iwlagn and iwl3945 drivers" depends on IWLWIFI config IWLWIFI_RFKILL - bool "Enable RF kill support in iwlagn and iwl3945 drivers" - depends on IWLWIFI + def_bool y + depends on IWLWIFI && RFKILL config IWLWIFI_SPECTRUM_MEASUREMENT bool "Enable Spectrum Measurement in iwlagn driver" diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c index 65605ad..1314993 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c +++ b/drivers/net/wireless/iwlwifi/iwl-rfkill.c @@ -36,42 +36,37 @@ #include "iwl-core.h" /* software rf-kill from user */ -static int iwl_rfkill_soft_rf_kill(void *data, enum rfkill_state state) +static int iwl_rfkill_soft_rf_kill(void *data, bool blocked) { struct iwl_priv *priv = data; - int err = 0; if (!priv->rfkill) - return 0; + return -EINVAL; if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return 0; - IWL_DEBUG_RF_KILL(priv, "we received soft RFKILL set to state %d\n", state); + IWL_DEBUG_RF_KILL(priv, "received soft RFKILL: block=%d\n", blocked); + mutex_lock(&priv->mutex); - switch (state) { - case RFKILL_STATE_UNBLOCKED: - if (iwl_is_rfkill_hw(priv)) { - err = -EBUSY; - goto out_unlock; - } + if (iwl_is_rfkill_hw(priv)) + goto out_unlock; + + if (!blocked) iwl_radio_kill_sw_enable_radio(priv); - break; - case RFKILL_STATE_SOFT_BLOCKED: + else iwl_radio_kill_sw_disable_radio(priv); - break; - default: - IWL_WARN(priv, "we received unexpected RFKILL state %d\n", - state); - break; - } + out_unlock: mutex_unlock(&priv->mutex); - - return err; + return 0; } +static const struct rfkill_ops iwl_rfkill_ops = { + .set_block = iwl_rfkill_soft_rf_kill, +}; + int iwl_rfkill_init(struct iwl_priv *priv) { struct device *device = wiphy_dev(priv->hw->wiphy); @@ -80,21 +75,16 @@ int iwl_rfkill_init(struct iwl_priv *priv) BUG_ON(device == NULL); IWL_DEBUG_RF_KILL(priv, "Initializing RFKILL.\n"); - priv->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN); + priv->rfkill = rfkill_alloc(priv->cfg->name, + device, + RFKILL_TYPE_WLAN, + &iwl_rfkill_ops, priv); if (!priv->rfkill) { IWL_ERR(priv, "Unable to allocate RFKILL device.\n"); ret = -ENOMEM; goto error; } - priv->rfkill->name = priv->cfg->name; - priv->rfkill->data = priv; - priv->rfkill->state = RFKILL_STATE_UNBLOCKED; - priv->rfkill->toggle_radio = iwl_rfkill_soft_rf_kill; - - priv->rfkill->dev.class->suspend = NULL; - priv->rfkill->dev.class->resume = NULL; - ret = rfkill_register(priv->rfkill); if (ret) { IWL_ERR(priv, "Unable to register RFKILL: %d\n", ret); @@ -102,11 +92,10 @@ int iwl_rfkill_init(struct iwl_priv *priv) } IWL_DEBUG_RF_KILL(priv, "RFKILL initialization complete.\n"); - return ret; + return 0; free_rfkill: - if (priv->rfkill != NULL) - rfkill_free(priv->rfkill); + rfkill_destroy(priv->rfkill); priv->rfkill = NULL; error: @@ -118,8 +107,10 @@ EXPORT_SYMBOL(iwl_rfkill_init); void iwl_rfkill_unregister(struct iwl_priv *priv) { - if (priv->rfkill) + if (priv->rfkill) { rfkill_unregister(priv->rfkill); + rfkill_destroy(priv->rfkill); + } priv->rfkill = NULL; } @@ -131,14 +122,10 @@ void iwl_rfkill_set_hw_state(struct iwl_priv *priv) if (!priv->rfkill) return; - if (iwl_is_rfkill_hw(priv)) { - rfkill_force_state(priv->rfkill, RFKILL_STATE_HARD_BLOCKED); - return; - } - - if (!iwl_is_rfkill_sw(priv)) - rfkill_force_state(priv->rfkill, RFKILL_STATE_UNBLOCKED); + if (rfkill_set_hw_state(priv->rfkill, + !!iwl_is_rfkill_hw(priv))) + iwl_radio_kill_sw_disable_radio(priv); else - rfkill_force_state(priv->rfkill, RFKILL_STATE_SOFT_BLOCKED); + iwl_radio_kill_sw_enable_radio(priv); } EXPORT_SYMBOL(iwl_rfkill_set_hw_state); diff --git a/drivers/net/wireless/iwmc3200wifi/rfkill.c b/drivers/net/wireless/iwmc3200wifi/rfkill.c index 4ca8b49..8ee2c3c 100644 --- a/drivers/net/wireless/iwmc3200wifi/rfkill.c +++ b/drivers/net/wireless/iwmc3200wifi/rfkill.c @@ -25,47 +25,42 @@ #include "iwm.h" -static int iwm_rfkill_soft_toggle(void *data, enum rfkill_state state) +static int iwm_rfkill_set_block(void *data, bool blocked) { struct iwm_priv *iwm = data; - switch (state) { - case RFKILL_STATE_UNBLOCKED: + if (!blocked) { if (test_bit(IWM_RADIO_RFKILL_HW, &iwm->radio)) return -EBUSY; if (test_and_clear_bit(IWM_RADIO_RFKILL_SW, &iwm->radio) && (iwm_to_ndev(iwm)->flags & IFF_UP)) - iwm_up(iwm); - - break; - case RFKILL_STATE_SOFT_BLOCKED: + return iwm_up(iwm); + } else { if (!test_and_set_bit(IWM_RADIO_RFKILL_SW, &iwm->radio)) - iwm_down(iwm); - - break; - default: - break; + return iwm_down(iwm); } return 0; } +static const struct rfkill_ops iwm_rfkill_ops = { + .set_block = iwm_rfkill_set_block, +}; + int iwm_rfkill_init(struct iwm_priv *iwm) { int ret; - iwm->rfkill = rfkill_allocate(iwm_to_dev(iwm), RFKILL_TYPE_WLAN); + iwm->rfkill = rfkill_alloc(KBUILD_MODNAME, + iwm_to_dev(iwm), + RFKILL_TYPE_WLAN, + &iwm_rfkill_ops, iwm); if (!iwm->rfkill) { IWM_ERR(iwm, "Unable to allocate rfkill device\n"); return -ENOMEM; } - iwm->rfkill->name = KBUILD_MODNAME; - iwm->rfkill->data = iwm; - iwm->rfkill->state = RFKILL_STATE_UNBLOCKED; - iwm->rfkill->toggle_radio = iwm_rfkill_soft_toggle; - ret = rfkill_register(iwm->rfkill); if (ret) { IWM_ERR(iwm, "Failed to register rfkill device\n"); @@ -74,15 +69,15 @@ int iwm_rfkill_init(struct iwm_priv *iwm) return 0; fail: - rfkill_free(iwm->rfkill); + rfkill_destroy(iwm->rfkill); return ret; } void iwm_rfkill_exit(struct iwm_priv *iwm) { - if (iwm->rfkill) + if (iwm->rfkill) { rfkill_unregister(iwm->rfkill); - - rfkill_free(iwm->rfkill); + rfkill_destroy(iwm->rfkill); + } iwm->rfkill = NULL; } diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 284ebac..c682ac5 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -21,7 +21,7 @@ config ACER_WMI depends on NEW_LEDS depends on BACKLIGHT_CLASS_DEVICE depends on SERIO_I8042 - depends on RFKILL + depends on RFKILL || RFKILL = n select ACPI_WMI ---help--- This is a driver for newer Acer (and Wistron) laptops. It adds @@ -60,7 +60,7 @@ config DELL_LAPTOP depends on DCDBAS depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE - depends on RFKILL + depends on RFKILL || RFKILL = n depends on POWER_SUPPLY default n ---help--- @@ -117,7 +117,7 @@ config HP_WMI tristate "HP WMI extras" depends on ACPI_WMI depends on INPUT - depends on RFKILL + depends on RFKILL || RFKILL = n help Say Y here if you want to support WMI-based hotkeys on HP laptops and to read data from WMI such as docking or ambient light sensor state. @@ -196,14 +196,13 @@ config THINKPAD_ACPI tristate "ThinkPad ACPI Laptop Extras" depends on ACPI depends on INPUT + depends on RFKILL || RFKILL = n select BACKLIGHT_LCD_SUPPORT select BACKLIGHT_CLASS_DEVICE select HWMON select NVRAM select NEW_LEDS select LEDS_CLASS - select NET - select RFKILL ---help--- This is a driver for the IBM and Lenovo ThinkPad laptops. It adds support for Fn-Fx key combinations, Bluetooth control, video @@ -338,9 +337,9 @@ config EEEPC_LAPTOP depends on ACPI depends on INPUT depends on EXPERIMENTAL + depends on RFKILL || RFKILL = n select BACKLIGHT_CLASS_DEVICE select HWMON - select RFKILL ---help--- This driver supports the Fn-Fx keys on Eee PC laptops. It also adds the ability to switch camera/wlan on/off. @@ -405,9 +404,8 @@ config ACPI_TOSHIBA tristate "Toshiba Laptop Extras" depends on ACPI depends on INPUT + depends on RFKILL || RFKILL = n select INPUT_POLLDEV - select NET - select RFKILL select BACKLIGHT_CLASS_DEVICE ---help--- This driver adds support for access to certain system settings diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 62d02b3..b618fa5 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -958,58 +958,50 @@ static void acer_rfkill_update(struct work_struct *ignored) status = get_u32(&state, ACER_CAP_WIRELESS); if (ACPI_SUCCESS(status)) - rfkill_force_state(wireless_rfkill, state ? - RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED); + rfkill_set_sw_state(wireless_rfkill, !!state); if (has_cap(ACER_CAP_BLUETOOTH)) { status = get_u32(&state, ACER_CAP_BLUETOOTH); if (ACPI_SUCCESS(status)) - rfkill_force_state(bluetooth_rfkill, state ? - RFKILL_STATE_UNBLOCKED : - RFKILL_STATE_SOFT_BLOCKED); + rfkill_set_sw_state(bluetooth_rfkill, !!state); } schedule_delayed_work(&acer_rfkill_work, round_jiffies_relative(HZ)); } -static int acer_rfkill_set(void *data, enum rfkill_state state) +static int acer_rfkill_set(void *data, bool blocked) { acpi_status status; - u32 *cap = data; - status = set_u32((u32) (state == RFKILL_STATE_UNBLOCKED), *cap); + u32 cap = (unsigned long)data; + status = set_u32(!!blocked, cap); if (ACPI_FAILURE(status)) return -ENODEV; return 0; } -static struct rfkill * acer_rfkill_register(struct device *dev, -enum rfkill_type type, char *name, u32 cap) +static const struct rfkill_ops acer_rfkill_ops = { + .set_block = acer_rfkill_set, +}; + +static struct rfkill *acer_rfkill_register(struct device *dev, + enum rfkill_type type, + char *name, u32 cap) { int err; u32 state; - u32 *data; struct rfkill *rfkill_dev; - rfkill_dev = rfkill_allocate(dev, type); + rfkill_dev = rfkill_alloc(name, dev, type, + &acer_rfkill_ops, + (void *)(unsigned long)cap); if (!rfkill_dev) return ERR_PTR(-ENOMEM); - rfkill_dev->name = name; get_u32(&state, cap); - rfkill_dev->state = state ? RFKILL_STATE_UNBLOCKED : - RFKILL_STATE_SOFT_BLOCKED; - data = kzalloc(sizeof(u32), GFP_KERNEL); - if (!data) { - rfkill_free(rfkill_dev); - return ERR_PTR(-ENOMEM); - } - *data = cap; - rfkill_dev->data = data; - rfkill_dev->toggle_radio = acer_rfkill_set; + rfkill_set_sw_state(rfkill_dev, !state); err = rfkill_register(rfkill_dev); if (err) { - kfree(rfkill_dev->data); - rfkill_free(rfkill_dev); + rfkill_destroy(rfkill_dev); return ERR_PTR(err); } return rfkill_dev; @@ -1027,8 +1019,8 @@ static int acer_rfkill_init(struct device *dev) RFKILL_TYPE_BLUETOOTH, "acer-bluetooth", ACER_CAP_BLUETOOTH); if (IS_ERR(bluetooth_rfkill)) { - kfree(wireless_rfkill->data); rfkill_unregister(wireless_rfkill); + rfkill_destroy(wireless_rfkill); return PTR_ERR(bluetooth_rfkill); } } @@ -1041,11 +1033,13 @@ static int acer_rfkill_init(struct device *dev) static void acer_rfkill_exit(void) { cancel_delayed_work_sync(&acer_rfkill_work); - kfree(wireless_rfkill->data); + rfkill_unregister(wireless_rfkill); + rfkill_destroy(wireless_rfkill); + if (has_cap(ACER_CAP_BLUETOOTH)) { - kfree(bluetooth_rfkill->data); rfkill_unregister(bluetooth_rfkill); + rfkill_destroy(bluetooth_rfkill); } return; } diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index af9f430..2faf0e1 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -174,10 +174,11 @@ dell_send_request(struct calling_interface_buffer *buffer, int class, result[3]: NVRAM format version number */ -static int dell_rfkill_set(int radio, enum rfkill_state state) +static int dell_rfkill_set(void *data, bool blocked) { struct calling_interface_buffer buffer; - int disable = (state == RFKILL_STATE_UNBLOCKED) ? 0 : 1; + int disable = blocked ? 0 : 1; + unsigned long radio = (unsigned long)data; memset(&buffer, 0, sizeof(struct calling_interface_buffer)); buffer.input[0] = (1 | (radio<<8) | (disable << 16)); @@ -186,56 +187,24 @@ static int dell_rfkill_set(int radio, enum rfkill_state state) return 0; } -static int dell_wifi_set(void *data, enum rfkill_state state) -{ - return dell_rfkill_set(1, state); -} - -static int dell_bluetooth_set(void *data, enum rfkill_state state) -{ - return dell_rfkill_set(2, state); -} - -static int dell_wwan_set(void *data, enum rfkill_state state) -{ - return dell_rfkill_set(3, state); -} - -static int dell_rfkill_get(int bit, enum rfkill_state *state) +static void dell_rfkill_query(struct rfkill *rfkill, void *data) { struct calling_interface_buffer buffer; int status; - int new_state = RFKILL_STATE_HARD_BLOCKED; + int bit = (unsigned long)data + 16; memset(&buffer, 0, sizeof(struct calling_interface_buffer)); dell_send_request(&buffer, 17, 11); status = buffer.output[1]; - if (status & (1<<16)) - new_state = RFKILL_STATE_SOFT_BLOCKED; - - if (status & (1<name = "dell-wifi"; - wifi_rfkill->toggle_radio = dell_wifi_set; - wifi_rfkill->get_state = dell_wifi_get; + } ret = rfkill_register(wifi_rfkill); if (ret) goto err_wifi; } if ((status & (1<<3|1<<9)) == (1<<3|1<<9)) { - bluetooth_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_BLUETOOTH); - if (!bluetooth_rfkill) + bluetooth_rfkill = rfkill_alloc("dell-bluetooth", NULL, + RFKILL_TYPE_BLUETOOTH, + &dell_rfkill_ops, (void *) 2); + if (!bluetooth_rfkill) { + ret = -ENOMEM; goto err_bluetooth; - bluetooth_rfkill->name = "dell-bluetooth"; - bluetooth_rfkill->toggle_radio = dell_bluetooth_set; - bluetooth_rfkill->get_state = dell_bluetooth_get; + } ret = rfkill_register(bluetooth_rfkill); if (ret) goto err_bluetooth; } if ((status & (1<<4|1<<10)) == (1<<4|1<<10)) { - wwan_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WWAN); - if (!wwan_rfkill) + wwan_rfkill = rfkill_alloc("dell-wwan", NULL, RFKILL_TYPE_WWAN, + &dell_rfkill_ops, (void *) 3); + if (!wwan_rfkill) { + ret = -ENOMEM; goto err_wwan; - wwan_rfkill->name = "dell-wwan"; - wwan_rfkill->toggle_radio = dell_wwan_set; - wwan_rfkill->get_state = dell_wwan_get; + } ret = rfkill_register(wwan_rfkill); if (ret) goto err_wwan; @@ -285,22 +255,15 @@ static int dell_setup_rfkill(void) return 0; err_wwan: - if (wwan_rfkill) - rfkill_free(wwan_rfkill); - if (bluetooth_rfkill) { + rfkill_destroy(wwan_rfkill); + if (bluetooth_rfkill) rfkill_unregister(bluetooth_rfkill); - bluetooth_rfkill = NULL; - } err_bluetooth: - if (bluetooth_rfkill) - rfkill_free(bluetooth_rfkill); - if (wifi_rfkill) { + rfkill_destroy(bluetooth_rfkill); + if (wifi_rfkill) rfkill_unregister(wifi_rfkill); - wifi_rfkill = NULL; - } err_wifi: - if (wifi_rfkill) - rfkill_free(wifi_rfkill); + rfkill_destroy(wifi_rfkill); return ret; } diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 353a898..1208d0c 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -299,39 +299,22 @@ static int update_bl_status(struct backlight_device *bd) * Rfkill helpers */ -static int eeepc_wlan_rfkill_set(void *data, enum rfkill_state state) -{ - if (state == RFKILL_STATE_SOFT_BLOCKED) - return set_acpi(CM_ASL_WLAN, 0); - else - return set_acpi(CM_ASL_WLAN, 1); -} - -static int eeepc_wlan_rfkill_state(void *data, enum rfkill_state *state) +static bool eeepc_wlan_rfkill_blocked(void) { if (get_acpi(CM_ASL_WLAN) == 1) - *state = RFKILL_STATE_UNBLOCKED; - else - *state = RFKILL_STATE_SOFT_BLOCKED; - return 0; + return false; + return true; } -static int eeepc_bluetooth_rfkill_set(void *data, enum rfkill_state state) +static int eeepc_rfkill_set(void *data, bool blocked) { - if (state == RFKILL_STATE_SOFT_BLOCKED) - return set_acpi(CM_ASL_BLUETOOTH, 0); - else - return set_acpi(CM_ASL_BLUETOOTH, 1); + unsigned long asl = (unsigned long)data; + return set_acpi(asl, !blocked); } -static int eeepc_bluetooth_rfkill_state(void *data, enum rfkill_state *state) -{ - if (get_acpi(CM_ASL_BLUETOOTH) == 1) - *state = RFKILL_STATE_UNBLOCKED; - else - *state = RFKILL_STATE_SOFT_BLOCKED; - return 0; -} +static const struct rfkill_ops eeepc_rfkill_ops = { + .set_block = eeepc_rfkill_set, +}; /* * Sys helpers @@ -531,9 +514,9 @@ static int notify_brn(void) static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) { - enum rfkill_state state; struct pci_dev *dev; struct pci_bus *bus = pci_find_bus(0, 1); + bool blocked; if (event != ACPI_NOTIFY_BUS_CHECK) return; @@ -543,9 +526,8 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) return; } - eeepc_wlan_rfkill_state(ehotk->eeepc_wlan_rfkill, &state); - - if (state == RFKILL_STATE_UNBLOCKED) { + blocked = eeepc_wlan_rfkill_blocked(); + if (!blocked) { dev = pci_get_slot(bus, 0); if (dev) { /* Device already present */ @@ -566,7 +548,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) } } - rfkill_force_state(ehotk->eeepc_wlan_rfkill, state); + rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked); } static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) @@ -684,26 +666,17 @@ static int eeepc_hotk_add(struct acpi_device *device) eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); if (get_acpi(CM_ASL_WLAN) != -1) { - ehotk->eeepc_wlan_rfkill = rfkill_allocate(&device->dev, - RFKILL_TYPE_WLAN); + ehotk->eeepc_wlan_rfkill = rfkill_alloc("eeepc-wlan", + &device->dev, + RFKILL_TYPE_WLAN, + &eeepc_rfkill_ops, + (void *)CM_ASL_WLAN); if (!ehotk->eeepc_wlan_rfkill) goto wlan_fail; - ehotk->eeepc_wlan_rfkill->name = "eeepc-wlan"; - ehotk->eeepc_wlan_rfkill->toggle_radio = eeepc_wlan_rfkill_set; - ehotk->eeepc_wlan_rfkill->get_state = eeepc_wlan_rfkill_state; - if (get_acpi(CM_ASL_WLAN) == 1) { - ehotk->eeepc_wlan_rfkill->state = - RFKILL_STATE_UNBLOCKED; - rfkill_set_default(RFKILL_TYPE_WLAN, - RFKILL_STATE_UNBLOCKED); - } else { - ehotk->eeepc_wlan_rfkill->state = - RFKILL_STATE_SOFT_BLOCKED; - rfkill_set_default(RFKILL_TYPE_WLAN, - RFKILL_STATE_SOFT_BLOCKED); - } + rfkill_set_global_sw_state(RFKILL_TYPE_WLAN, + get_acpi(CM_ASL_WLAN) != 1); result = rfkill_register(ehotk->eeepc_wlan_rfkill); if (result) goto wlan_fail; @@ -711,28 +684,17 @@ static int eeepc_hotk_add(struct acpi_device *device) if (get_acpi(CM_ASL_BLUETOOTH) != -1) { ehotk->eeepc_bluetooth_rfkill = - rfkill_allocate(&device->dev, RFKILL_TYPE_BLUETOOTH); + rfkill_alloc("eeepc-bluetooth", + &device->dev, + RFKILL_TYPE_BLUETOOTH, + &eeepc_rfkill_ops, + (void *)CM_ASL_BLUETOOTH); if (!ehotk->eeepc_bluetooth_rfkill) goto bluetooth_fail; - ehotk->eeepc_bluetooth_rfkill->name = "eeepc-bluetooth"; - ehotk->eeepc_bluetooth_rfkill->toggle_radio = - eeepc_bluetooth_rfkill_set; - ehotk->eeepc_bluetooth_rfkill->get_state = - eeepc_bluetooth_rfkill_state; - if (get_acpi(CM_ASL_BLUETOOTH) == 1) { - ehotk->eeepc_bluetooth_rfkill->state = - RFKILL_STATE_UNBLOCKED; - rfkill_set_default(RFKILL_TYPE_BLUETOOTH, - RFKILL_STATE_UNBLOCKED); - } else { - ehotk->eeepc_bluetooth_rfkill->state = - RFKILL_STATE_SOFT_BLOCKED; - rfkill_set_default(RFKILL_TYPE_BLUETOOTH, - RFKILL_STATE_SOFT_BLOCKED); - } - + rfkill_set_global_sw_state(RFKILL_TYPE_BLUETOOTH, + get_acpi(CM_ASL_BLUETOOTH) != 1); result = rfkill_register(ehotk->eeepc_bluetooth_rfkill); if (result) goto bluetooth_fail; @@ -741,13 +703,10 @@ static int eeepc_hotk_add(struct acpi_device *device) return 0; bluetooth_fail: - if (ehotk->eeepc_bluetooth_rfkill) - rfkill_free(ehotk->eeepc_bluetooth_rfkill); + rfkill_destroy(ehotk->eeepc_bluetooth_rfkill); rfkill_unregister(ehotk->eeepc_wlan_rfkill); - ehotk->eeepc_wlan_rfkill = NULL; wlan_fail: - if (ehotk->eeepc_wlan_rfkill) - rfkill_free(ehotk->eeepc_wlan_rfkill); + rfkill_destroy(ehotk->eeepc_wlan_rfkill); eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); ehotk_fail: diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index fe171fa..8d93114 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -154,58 +154,46 @@ static int hp_wmi_dock_state(void) return hp_wmi_perform_query(HPWMI_DOCK_QUERY, 0, 0); } -static int hp_wmi_wifi_set(void *data, enum rfkill_state state) +static int hp_wmi_set_block(void *data, bool blocked) { - if (state) - return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x101); - else - return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x100); -} + unsigned long b = (unsigned long) data; + int query = BIT(b + 8) | ((!!blocked) << b); -static int hp_wmi_bluetooth_set(void *data, enum rfkill_state state) -{ - if (state) - return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x202); - else - return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x200); + return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query); } -static int hp_wmi_wwan_set(void *data, enum rfkill_state state) -{ - if (state) - return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x404); - else - return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x400); -} +static const struct rfkill_ops hp_wmi_rfkill_ops = { + .set_block = hp_wmi_set_block, +}; -static int hp_wmi_wifi_state(void) +static bool hp_wmi_wifi_state(void) { int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0); if (wireless & 0x100) - return RFKILL_STATE_UNBLOCKED; + return false; else - return RFKILL_STATE_SOFT_BLOCKED; + return true; } -static int hp_wmi_bluetooth_state(void) +static bool hp_wmi_bluetooth_state(void) { int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0); if (wireless & 0x10000) - return RFKILL_STATE_UNBLOCKED; + return false; else - return RFKILL_STATE_SOFT_BLOCKED; + return true; } -static int hp_wmi_wwan_state(void) +static bool hp_wmi_wwan_state(void) { int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0); if (wireless & 0x1000000) - return RFKILL_STATE_UNBLOCKED; + return false; else - return RFKILL_STATE_SOFT_BLOCKED; + return true; } static ssize_t show_display(struct device *dev, struct device_attribute *attr, @@ -347,14 +335,14 @@ static void hp_wmi_notify(u32 value, void *context) } } else if (eventcode == 0x5) { if (wifi_rfkill) - rfkill_force_state(wifi_rfkill, - hp_wmi_wifi_state()); + rfkill_set_sw_state(wifi_rfkill, + hp_wmi_wifi_state()); if (bluetooth_rfkill) - rfkill_force_state(bluetooth_rfkill, - hp_wmi_bluetooth_state()); + rfkill_set_sw_state(bluetooth_rfkill, + hp_wmi_bluetooth_state()); if (wwan_rfkill) - rfkill_force_state(wwan_rfkill, - hp_wmi_wwan_state()); + rfkill_set_sw_state(wwan_rfkill, + hp_wmi_wwan_state()); } else printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n", eventcode); @@ -430,31 +418,34 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) goto add_sysfs_error; if (wireless & 0x1) { - wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN); - wifi_rfkill->name = "hp-wifi"; - wifi_rfkill->state = hp_wmi_wifi_state(); - wifi_rfkill->toggle_radio = hp_wmi_wifi_set; + wifi_rfkill = rfkill_alloc("hp-wifi", &device->dev, + RFKILL_TYPE_WLAN, + &hp_wmi_rfkill_ops, + (void *) 0); + rfkill_set_sw_state(wifi_rfkill, hp_wmi_wifi_state()); err = rfkill_register(wifi_rfkill); if (err) - goto add_sysfs_error; + goto register_wifi_error; } if (wireless & 0x2) { - bluetooth_rfkill = rfkill_allocate(&device->dev, - RFKILL_TYPE_BLUETOOTH); - bluetooth_rfkill->name = "hp-bluetooth"; - bluetooth_rfkill->state = hp_wmi_bluetooth_state(); - bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set; + bluetooth_rfkill = rfkill_alloc("hp-bluetooth", &device->dev, + RFKILL_TYPE_BLUETOOTH, + &hp_wmi_rfkill_ops, + (void *) 1); + rfkill_set_sw_state(bluetooth_rfkill, + hp_wmi_bluetooth_state()); err = rfkill_register(bluetooth_rfkill); if (err) goto register_bluetooth_error; } if (wireless & 0x4) { - wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WWAN); - wwan_rfkill->name = "hp-wwan"; - wwan_rfkill->state = hp_wmi_wwan_state(); - wwan_rfkill->toggle_radio = hp_wmi_wwan_set; + wwan_rfkill = rfkill_alloc("hp-wwan", &device->dev, + RFKILL_TYPE_WWAN, + &hp_wmi_rfkill_ops, + (void *) 2); + rfkill_set_sw_state(wwan_rfkill, hp_wmi_wwan_state()); err = rfkill_register(wwan_rfkill); if (err) goto register_wwan_err; @@ -462,11 +453,15 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) return 0; register_wwan_err: + rfkill_destroy(wwan_rfkill); if (bluetooth_rfkill) rfkill_unregister(bluetooth_rfkill); register_bluetooth_error: + rfkill_destroy(bluetooth_rfkill); if (wifi_rfkill) rfkill_unregister(wifi_rfkill); +register_wifi_error: + rfkill_destroy(wifi_rfkill); add_sysfs_error: cleanup_sysfs(device); return err; @@ -476,12 +471,18 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device) { cleanup_sysfs(device); - if (wifi_rfkill) + if (wifi_rfkill) { rfkill_unregister(wifi_rfkill); - if (bluetooth_rfkill) + rfkill_destroy(wifi_rfkill); + } + if (bluetooth_rfkill) { rfkill_unregister(bluetooth_rfkill); - if (wwan_rfkill) + rfkill_destroy(wifi_rfkill); + } + if (wwan_rfkill) { rfkill_unregister(wwan_rfkill); + rfkill_destroy(wwan_rfkill); + } return 0; } diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index f1963b0..aec0b27 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -128,11 +128,11 @@ enum sony_nc_rfkill { SONY_BLUETOOTH, SONY_WWAN, SONY_WIMAX, - SONY_RFKILL_MAX, + N_SONY_RFKILL, }; -static struct rfkill *sony_rfkill_devices[SONY_RFKILL_MAX]; -static int sony_rfkill_address[SONY_RFKILL_MAX] = {0x300, 0x500, 0x700, 0x900}; +static struct rfkill *sony_rfkill_devices[N_SONY_RFKILL]; +static int sony_rfkill_address[N_SONY_RFKILL] = {0x300, 0x500, 0x700, 0x900}; static void sony_nc_rfkill_update(void); /*********** Input Devices ***********/ @@ -1051,147 +1051,98 @@ static void sony_nc_rfkill_cleanup(void) { int i; - for (i = 0; i < SONY_RFKILL_MAX; i++) { - if (sony_rfkill_devices[i]) + for (i = 0; i < N_SONY_RFKILL; i++) { + if (sony_rfkill_devices[i]) { rfkill_unregister(sony_rfkill_devices[i]); + rfkill_destroy(sony_rfkill_devices[i]); + } } } -static int sony_nc_rfkill_get(void *data, enum rfkill_state *state) -{ - int result; - int argument = sony_rfkill_address[(long) data]; - - sony_call_snc_handle(0x124, 0x200, &result); - if (result & 0x1) { - sony_call_snc_handle(0x124, argument, &result); - if (result & 0xf) - *state = RFKILL_STATE_UNBLOCKED; - else - *state = RFKILL_STATE_SOFT_BLOCKED; - } else { - *state = RFKILL_STATE_HARD_BLOCKED; - } - - return 0; -} - -static int sony_nc_rfkill_set(void *data, enum rfkill_state state) +static int sony_nc_rfkill_set(void *data, bool blocked) { int result; int argument = sony_rfkill_address[(long) data] + 0x100; - if (state == RFKILL_STATE_UNBLOCKED) + if (!blocked) argument |= 0xff0000; return sony_call_snc_handle(0x124, argument, &result); } -static int sony_nc_setup_wifi_rfkill(struct acpi_device *device) -{ - int err = 0; - struct rfkill *sony_wifi_rfkill; - - sony_wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN); - if (!sony_wifi_rfkill) - return -1; - sony_wifi_rfkill->name = "sony-wifi"; - sony_wifi_rfkill->toggle_radio = sony_nc_rfkill_set; - sony_wifi_rfkill->get_state = sony_nc_rfkill_get; - sony_wifi_rfkill->data = (void *)SONY_WIFI; - err = rfkill_register(sony_wifi_rfkill); - if (err) - rfkill_free(sony_wifi_rfkill); - else { - sony_rfkill_devices[SONY_WIFI] = sony_wifi_rfkill; - sony_nc_rfkill_set(sony_wifi_rfkill->data, - RFKILL_STATE_UNBLOCKED); - } - return err; -} +static const struct rfkill_ops sony_rfkill_ops = { + .set_block = sony_nc_rfkill_set, +}; -static int sony_nc_setup_bluetooth_rfkill(struct acpi_device *device) +static int sony_nc_setup_rfkill(struct acpi_device *device, + enum sony_nc_rfkill nc_type) { int err = 0; - struct rfkill *sony_bluetooth_rfkill; - - sony_bluetooth_rfkill = rfkill_allocate(&device->dev, - RFKILL_TYPE_BLUETOOTH); - if (!sony_bluetooth_rfkill) - return -1; - sony_bluetooth_rfkill->name = "sony-bluetooth"; - sony_bluetooth_rfkill->toggle_radio = sony_nc_rfkill_set; - sony_bluetooth_rfkill->get_state = sony_nc_rfkill_get; - sony_bluetooth_rfkill->data = (void *)SONY_BLUETOOTH; - err = rfkill_register(sony_bluetooth_rfkill); - if (err) - rfkill_free(sony_bluetooth_rfkill); - else { - sony_rfkill_devices[SONY_BLUETOOTH] = sony_bluetooth_rfkill; - sony_nc_rfkill_set(sony_bluetooth_rfkill->data, - RFKILL_STATE_UNBLOCKED); + struct rfkill *rfk; + enum rfkill_type type; + const char *name; + + switch (nc_type) { + case SONY_WIFI: + type = RFKILL_TYPE_WLAN; + name = "sony-wifi"; + break; + case SONY_BLUETOOTH: + type = RFKILL_TYPE_BLUETOOTH; + name = "sony-bluetooth"; + break; + case SONY_WWAN: + type = RFKILL_TYPE_WWAN; + name = "sony-wwan"; + break; + case SONY_WIMAX: + type = RFKILL_TYPE_WIMAX; + name = "sony-wimax"; + break; + default: + return -EINVAL; } - return err; -} -static int sony_nc_setup_wwan_rfkill(struct acpi_device *device) -{ - int err = 0; - struct rfkill *sony_wwan_rfkill; + rfk = rfkill_alloc(name, &device->dev, type, + &sony_rfkill_ops, (void *)nc_type); + if (!rfk) + return -ENOMEM; - sony_wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WWAN); - if (!sony_wwan_rfkill) - return -1; - sony_wwan_rfkill->name = "sony-wwan"; - sony_wwan_rfkill->toggle_radio = sony_nc_rfkill_set; - sony_wwan_rfkill->get_state = sony_nc_rfkill_get; - sony_wwan_rfkill->data = (void *)SONY_WWAN; - err = rfkill_register(sony_wwan_rfkill); - if (err) - rfkill_free(sony_wwan_rfkill); - else { - sony_rfkill_devices[SONY_WWAN] = sony_wwan_rfkill; - sony_nc_rfkill_set(sony_wwan_rfkill->data, - RFKILL_STATE_UNBLOCKED); + err = rfkill_register(rfk); + if (err) { + rfkill_destroy(rfk); + return err; } + sony_rfkill_devices[nc_type] = rfk; + sony_nc_rfkill_set((void *)nc_type, false); return err; } -static int sony_nc_setup_wimax_rfkill(struct acpi_device *device) +static void sony_nc_rfkill_update() { - int err = 0; - struct rfkill *sony_wimax_rfkill; + enum sony_nc_rfkill i; + int result; + bool hwblock; - sony_wimax_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WIMAX); - if (!sony_wimax_rfkill) - return -1; - sony_wimax_rfkill->name = "sony-wimax"; - sony_wimax_rfkill->toggle_radio = sony_nc_rfkill_set; - sony_wimax_rfkill->get_state = sony_nc_rfkill_get; - sony_wimax_rfkill->data = (void *)SONY_WIMAX; - err = rfkill_register(sony_wimax_rfkill); - if (err) - rfkill_free(sony_wimax_rfkill); - else { - sony_rfkill_devices[SONY_WIMAX] = sony_wimax_rfkill; - sony_nc_rfkill_set(sony_wimax_rfkill->data, - RFKILL_STATE_UNBLOCKED); - } - return err; -} + sony_call_snc_handle(0x124, 0x200, &result); + hwblock = !(result & 0x1); -static void sony_nc_rfkill_update() -{ - int i; - enum rfkill_state state; + for (i = 0; i < N_SONY_RFKILL; i++) { + int argument = sony_rfkill_address[i]; - for (i = 0; i < SONY_RFKILL_MAX; i++) { - if (sony_rfkill_devices[i]) { - sony_rfkill_devices[i]-> - get_state(sony_rfkill_devices[i]->data, - &state); - rfkill_force_state(sony_rfkill_devices[i], state); + if (!sony_rfkill_devices[i]) + continue; + + if (hwblock) { + if (rfkill_set_hw_state(sony_rfkill_devices[i], true)) + sony_nc_rfkill_set(sony_rfkill_devices[i], + true); + continue; } + + sony_call_snc_handle(0x124, argument, &result); + rfkill_set_states(sony_rfkill_devices[i], + !(result & 0xf), false); } } @@ -1210,13 +1161,13 @@ static int sony_nc_rfkill_setup(struct acpi_device *device) } if (result & 0x1) - sony_nc_setup_wifi_rfkill(device); + sony_nc_setup_rfkill(device, SONY_WIFI); if (result & 0x2) - sony_nc_setup_bluetooth_rfkill(device); + sony_nc_setup_rfkill(device, SONY_BLUETOOTH); if (result & 0x1c) - sony_nc_setup_wwan_rfkill(device); + sony_nc_setup_rfkill(device, SONY_WWAN); if (result & 0x20) - sony_nc_setup_wimax_rfkill(device); + sony_nc_setup_rfkill(device, SONY_WIMAX); return 0; } diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 912be65..cfcafa4 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -166,13 +166,6 @@ enum { #define TPACPI_MAX_ACPI_ARGS 3 -/* rfkill switches */ -enum { - TPACPI_RFK_BLUETOOTH_SW_ID = 0, - TPACPI_RFK_WWAN_SW_ID, - TPACPI_RFK_UWB_SW_ID, -}; - /* printk headers */ #define TPACPI_LOG TPACPI_FILE ": " #define TPACPI_EMERG KERN_EMERG TPACPI_LOG @@ -1005,67 +998,237 @@ static int __init tpacpi_check_std_acpi_brightness_support(void) return 0; } -static int __init tpacpi_new_rfkill(const unsigned int id, - struct rfkill **rfk, +static void printk_deprecated_attribute(const char * const what, + const char * const details) +{ + tpacpi_log_usertask("deprecated sysfs attribute"); + printk(TPACPI_WARN "WARNING: sysfs attribute %s is deprecated and " + "will be removed. %s\n", + what, details); +} + +/************************************************************************* + * rfkill and radio control support helpers + */ + +/* + * ThinkPad-ACPI firmware handling model: + * + * WLSW (master wireless switch) is event-driven, and is common to all + * firmware-controlled radios. It cannot be controlled, just monitored, + * as expected. It overrides all radio state in firmware + * + * The kernel, a masked-off hotkey, and WLSW can change the radio state + * (TODO: verify how WLSW interacts with the returned radio state). + * + * The only time there are shadow radio state changes, is when + * masked-off hotkeys are used. + */ + +/* + * Internal driver API for radio state: + * + * int: < 0 = error, otherwise enum tpacpi_rfkill_state + * bool: true means radio blocked (off) + */ +enum tpacpi_rfkill_state { + TPACPI_RFK_RADIO_OFF = 0, + TPACPI_RFK_RADIO_ON +}; + +/* rfkill switches */ +enum tpacpi_rfk_id { + TPACPI_RFK_BLUETOOTH_SW_ID = 0, + TPACPI_RFK_WWAN_SW_ID, + TPACPI_RFK_UWB_SW_ID, + TPACPI_RFK_SW_MAX +}; + +static const char *tpacpi_rfkill_names[] = { + [TPACPI_RFK_BLUETOOTH_SW_ID] = "bluetooth", + [TPACPI_RFK_WWAN_SW_ID] = "wwan", + [TPACPI_RFK_UWB_SW_ID] = "uwb", + [TPACPI_RFK_SW_MAX] = NULL +}; + +/* ThinkPad-ACPI rfkill subdriver */ +struct tpacpi_rfk { + struct rfkill *rfkill; + enum tpacpi_rfk_id id; + const struct tpacpi_rfk_ops *ops; +}; + +struct tpacpi_rfk_ops { + /* firmware interface */ + int (*get_status)(void); + int (*set_status)(const enum tpacpi_rfkill_state); +}; + +static struct tpacpi_rfk *tpacpi_rfkill_switches[TPACPI_RFK_SW_MAX]; + +/* Query FW and update rfkill sw state for a given rfkill switch */ +static int tpacpi_rfk_update_swstate(const struct tpacpi_rfk *tp_rfk) +{ + int status; + + if (!tp_rfk) + return -ENODEV; + + status = (tp_rfk->ops->get_status)(); + if (status < 0) + return status; + + rfkill_set_sw_state(tp_rfk->rfkill, + (status == TPACPI_RFK_RADIO_OFF)); + + return status; +} + +/* Query FW and update rfkill sw state for all rfkill switches */ +static void tpacpi_rfk_update_swstate_all(void) +{ + unsigned int i; + + for (i = 0; i < TPACPI_RFK_SW_MAX; i++) + tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]); +} + +/* + * Sync the HW-blocking state of all rfkill switches, + * do notice it causes the rfkill core to schedule uevents + */ +static void tpacpi_rfk_update_hwblock_state(bool blocked) +{ + unsigned int i; + struct tpacpi_rfk *tp_rfk; + + for (i = 0; i < TPACPI_RFK_SW_MAX; i++) { + tp_rfk = tpacpi_rfkill_switches[i]; + if (tp_rfk) { + if (rfkill_set_hw_state(tp_rfk->rfkill, + blocked)) { + /* ignore -- we track sw block */ + } + } + } +} + +/* Call to get the WLSW state from the firmware */ +static int hotkey_get_wlsw(void); + +/* Call to query WLSW state and update all rfkill switches */ +static bool tpacpi_rfk_check_hwblock_state(void) +{ + int res = hotkey_get_wlsw(); + int hw_blocked; + + /* When unknown or unsupported, we have to assume it is unblocked */ + if (res < 0) + return false; + + hw_blocked = (res == TPACPI_RFK_RADIO_OFF); + tpacpi_rfk_update_hwblock_state(hw_blocked); + + return hw_blocked; +} + +static int tpacpi_rfk_hook_set_block(void *data, bool blocked) +{ + struct tpacpi_rfk *tp_rfk = data; + int res; + + dbg_printk(TPACPI_DBG_RFKILL, + "request to change radio state to %s\n", + blocked ? "blocked" : "unblocked"); + + /* try to set radio state */ + res = (tp_rfk->ops->set_status)(blocked ? + TPACPI_RFK_RADIO_OFF : TPACPI_RFK_RADIO_ON); + + /* and update the rfkill core with whatever the FW really did */ + tpacpi_rfk_update_swstate(tp_rfk); + + return (res < 0) ? res : 0; +} + +static const struct rfkill_ops tpacpi_rfk_rfkill_ops = { + .set_block = tpacpi_rfk_hook_set_block, +}; + +static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id, + const struct tpacpi_rfk_ops *tp_rfkops, const enum rfkill_type rfktype, const char *name, - const bool set_default, - int (*toggle_radio)(void *, enum rfkill_state), - int (*get_state)(void *, enum rfkill_state *)) + const bool set_default) { + struct tpacpi_rfk *atp_rfk; int res; - enum rfkill_state initial_state = RFKILL_STATE_SOFT_BLOCKED; + bool initial_sw_state = false; + int initial_sw_status; - res = get_state(NULL, &initial_state); - if (res < 0) { + BUG_ON(id >= TPACPI_RFK_SW_MAX || tpacpi_rfkill_switches[id]); + + initial_sw_status = (tp_rfkops->get_status)(); + if (initial_sw_status < 0) { printk(TPACPI_ERR "failed to read initial state for %s, error %d; " - "will turn radio off\n", name, res); - } else if (set_default) { - /* try to set the initial state as the default for the rfkill - * type, since we ask the firmware to preserve it across S5 in - * NVRAM */ - if (rfkill_set_default(rfktype, - (initial_state == RFKILL_STATE_UNBLOCKED) ? - RFKILL_STATE_UNBLOCKED : - RFKILL_STATE_SOFT_BLOCKED) == -EPERM) - vdbg_printk(TPACPI_DBG_RFKILL, - "Default state for %s cannot be changed\n", - name); - } - - *rfk = rfkill_allocate(&tpacpi_pdev->dev, rfktype); - if (!*rfk) { + "will turn radio off\n", name, initial_sw_status); + } else { + initial_sw_state = (initial_sw_status == TPACPI_RFK_RADIO_OFF); + if (set_default) { + /* try to set the initial state as the default for the + * rfkill type, since we ask the firmware to preserve + * it across S5 in NVRAM */ + rfkill_set_global_sw_state(rfktype, initial_sw_state); + } + } + + atp_rfk = kzalloc(sizeof(struct tpacpi_rfk), GFP_KERNEL); + if (atp_rfk) + atp_rfk->rfkill = rfkill_alloc(name, + &tpacpi_pdev->dev, + rfktype, + &tpacpi_rfk_rfkill_ops, + atp_rfk); + if (!atp_rfk || !atp_rfk->rfkill) { printk(TPACPI_ERR "failed to allocate memory for rfkill class\n"); + kfree(atp_rfk); return -ENOMEM; } - (*rfk)->name = name; - (*rfk)->get_state = get_state; - (*rfk)->toggle_radio = toggle_radio; - (*rfk)->state = initial_state; + atp_rfk->id = id; + atp_rfk->ops = tp_rfkops; + + rfkill_set_states(atp_rfk->rfkill, initial_sw_state, + tpacpi_rfk_check_hwblock_state()); - res = rfkill_register(*rfk); + res = rfkill_register(atp_rfk->rfkill); if (res < 0) { printk(TPACPI_ERR "failed to register %s rfkill switch: %d\n", name, res); - rfkill_free(*rfk); - *rfk = NULL; + rfkill_destroy(atp_rfk->rfkill); + kfree(atp_rfk); return res; } + tpacpi_rfkill_switches[id] = atp_rfk; return 0; } -static void printk_deprecated_attribute(const char * const what, - const char * const details) +static void tpacpi_destroy_rfkill(const enum tpacpi_rfk_id id) { - tpacpi_log_usertask("deprecated sysfs attribute"); - printk(TPACPI_WARN "WARNING: sysfs attribute %s is deprecated and " - "will be removed. %s\n", - what, details); + struct tpacpi_rfk *tp_rfk; + + BUG_ON(id >= TPACPI_RFK_SW_MAX); + + tp_rfk = tpacpi_rfkill_switches[id]; + if (tp_rfk) { + rfkill_unregister(tp_rfk->rfkill); + tpacpi_rfkill_switches[id] = NULL; + kfree(tp_rfk); + } } static void printk_deprecated_rfkill_attribute(const char * const what) @@ -1074,6 +1237,112 @@ static void printk_deprecated_rfkill_attribute(const char * const what) "Please switch to generic rfkill before year 2010"); } +/* sysfs enable ------------------------------------------------ */ +static ssize_t tpacpi_rfk_sysfs_enable_show(const enum tpacpi_rfk_id id, + struct device_attribute *attr, + char *buf) +{ + int status; + + printk_deprecated_rfkill_attribute(attr->attr.name); + + /* This is in the ABI... */ + if (tpacpi_rfk_check_hwblock_state()) { + status = TPACPI_RFK_RADIO_OFF; + } else { + status = tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[id]); + if (status < 0) + return status; + } + + return snprintf(buf, PAGE_SIZE, "%d\n", + (status == TPACPI_RFK_RADIO_ON) ? 1 : 0); +} + +static ssize_t tpacpi_rfk_sysfs_enable_store(const enum tpacpi_rfk_id id, + struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned long t; + int res; + + printk_deprecated_rfkill_attribute(attr->attr.name); + + if (parse_strtoul(buf, 1, &t)) + return -EINVAL; + + tpacpi_disclose_usertask(attr->attr.name, "set to %ld\n", t); + + /* This is in the ABI... */ + if (tpacpi_rfk_check_hwblock_state() && !!t) + return -EPERM; + + res = tpacpi_rfkill_switches[id]->ops->set_status((!!t) ? + TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF); + tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[id]); + + return (res < 0) ? res : count; +} + +/* procfs -------------------------------------------------------------- */ +static int tpacpi_rfk_procfs_read(const enum tpacpi_rfk_id id, char *p) +{ + int len = 0; + + if (id >= TPACPI_RFK_SW_MAX) + len += sprintf(p + len, "status:\t\tnot supported\n"); + else { + int status; + + /* This is in the ABI... */ + if (tpacpi_rfk_check_hwblock_state()) { + status = TPACPI_RFK_RADIO_OFF; + } else { + status = tpacpi_rfk_update_swstate( + tpacpi_rfkill_switches[id]); + if (status < 0) + return status; + } + + len += sprintf(p + len, "status:\t\t%s\n", + (status == TPACPI_RFK_RADIO_ON) ? + "enabled" : "disabled"); + len += sprintf(p + len, "commands:\tenable, disable\n"); + } + + return len; +} + +static int tpacpi_rfk_procfs_write(const enum tpacpi_rfk_id id, char *buf) +{ + char *cmd; + int status = -1; + int res = 0; + + if (id >= TPACPI_RFK_SW_MAX) + return -ENODEV; + + while ((cmd = next_cmd(&buf))) { + if (strlencmp(cmd, "enable") == 0) + status = TPACPI_RFK_RADIO_ON; + else if (strlencmp(cmd, "disable") == 0) + status = TPACPI_RFK_RADIO_OFF; + else + return -EINVAL; + } + + if (status != -1) { + tpacpi_disclose_usertask("procfs", "attempt to %s %s\n", + (status == TPACPI_RFK_RADIO_ON) ? + "enable" : "disable", + tpacpi_rfkill_names[id]); + res = (tpacpi_rfkill_switches[id]->ops->set_status)(status); + tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[id]); + } + + return res; +} + /************************************************************************* * thinkpad-acpi driver attributes */ @@ -1127,8 +1396,6 @@ static DRIVER_ATTR(version, S_IRUGO, #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES -static void tpacpi_send_radiosw_update(void); - /* wlsw_emulstate ------------------------------------------------------ */ static ssize_t tpacpi_driver_wlsw_emulstate_show(struct device_driver *drv, char *buf) @@ -1144,11 +1411,10 @@ static ssize_t tpacpi_driver_wlsw_emulstate_store(struct device_driver *drv, if (parse_strtoul(buf, 1, &t)) return -EINVAL; - if (tpacpi_wlsw_emulstate != t) { - tpacpi_wlsw_emulstate = !!t; - tpacpi_send_radiosw_update(); - } else + if (tpacpi_wlsw_emulstate != !!t) { tpacpi_wlsw_emulstate = !!t; + tpacpi_rfk_update_hwblock_state(!t); /* negative logic */ + } return count; } @@ -1463,17 +1729,23 @@ static struct attribute_set *hotkey_dev_attributes; /* HKEY.MHKG() return bits */ #define TP_HOTKEY_TABLET_MASK (1 << 3) -static int hotkey_get_wlsw(int *status) +static int hotkey_get_wlsw(void) { + int status; + + if (!tp_features.hotkey_wlsw) + return -ENODEV; + #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES - if (dbg_wlswemul) { - *status = !!tpacpi_wlsw_emulstate; - return 0; - } + if (dbg_wlswemul) + return (tpacpi_wlsw_emulstate) ? + TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF; #endif - if (!acpi_evalf(hkey_handle, status, "WLSW", "d")) + + if (!acpi_evalf(hkey_handle, &status, "WLSW", "d")) return -EIO; - return 0; + + return (status) ? TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF; } static int hotkey_get_tablet_mode(int *status) @@ -2107,12 +2379,16 @@ static ssize_t hotkey_radio_sw_show(struct device *dev, struct device_attribute *attr, char *buf) { - int res, s; - res = hotkey_get_wlsw(&s); + int res; + res = hotkey_get_wlsw(); if (res < 0) return res; - return snprintf(buf, PAGE_SIZE, "%d\n", !!s); + /* Opportunistic update */ + tpacpi_rfk_update_hwblock_state((res == TPACPI_RFK_RADIO_OFF)); + + return snprintf(buf, PAGE_SIZE, "%d\n", + (res == TPACPI_RFK_RADIO_OFF) ? 0 : 1); } static struct device_attribute dev_attr_hotkey_radio_sw = @@ -2223,30 +2499,52 @@ static struct attribute *hotkey_mask_attributes[] __initdata = { &dev_attr_hotkey_wakeup_hotunplug_complete.attr, }; -static void bluetooth_update_rfk(void); -static void wan_update_rfk(void); -static void uwb_update_rfk(void); +/* + * Sync both the hw and sw blocking state of all switches + */ static void tpacpi_send_radiosw_update(void) { int wlsw; - /* Sync these BEFORE sending any rfkill events */ - if (tp_features.bluetooth) - bluetooth_update_rfk(); - if (tp_features.wan) - wan_update_rfk(); - if (tp_features.uwb) - uwb_update_rfk(); + /* + * We must sync all rfkill controllers *before* issuing any + * rfkill input events, or we will race the rfkill core input + * handler. + * + * tpacpi_inputdev_send_mutex works as a syncronization point + * for the above. + * + * We optimize to avoid numerous calls to hotkey_get_wlsw. + */ - if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) { + wlsw = hotkey_get_wlsw(); + + /* Sync hw blocking state first if it is hw-blocked */ + if (wlsw == TPACPI_RFK_RADIO_OFF) + tpacpi_rfk_update_hwblock_state(true); + + /* Sync sw blocking state */ + tpacpi_rfk_update_swstate_all(); + + /* Sync hw blocking state last if it is hw-unblocked */ + if (wlsw == TPACPI_RFK_RADIO_ON) + tpacpi_rfk_update_hwblock_state(false); + + /* Issue rfkill input event for WLSW switch */ + if (!(wlsw < 0)) { mutex_lock(&tpacpi_inputdev_send_mutex); input_report_switch(tpacpi_inputdev, - SW_RFKILL_ALL, !!wlsw); + SW_RFKILL_ALL, (wlsw > 0)); input_sync(tpacpi_inputdev); mutex_unlock(&tpacpi_inputdev_send_mutex); } + + /* + * this can be unconditional, as we will poll state again + * if userspace uses the notify to read data + */ hotkey_radio_sw_notify_change(); } @@ -3056,8 +3354,6 @@ enum { #define TPACPI_RFK_BLUETOOTH_SW_NAME "tpacpi_bluetooth_sw" -static struct rfkill *tpacpi_bluetooth_rfkill; - static void bluetooth_suspend(pm_message_t state) { /* Try to make sure radio will resume powered off */ @@ -3067,83 +3363,47 @@ static void bluetooth_suspend(pm_message_t state) "bluetooth power down on resume request failed\n"); } -static int bluetooth_get_radiosw(void) +static int bluetooth_get_status(void) { int status; - if (!tp_features.bluetooth) - return -ENODEV; - - /* WLSW overrides bluetooth in firmware/hardware, reflect that */ - if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status) - return RFKILL_STATE_HARD_BLOCKED; - #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES if (dbg_bluetoothemul) return (tpacpi_bluetooth_emulstate) ? - RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED; + TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF; #endif if (!acpi_evalf(hkey_handle, &status, "GBDC", "d")) return -EIO; return ((status & TP_ACPI_BLUETOOTH_RADIOSSW) != 0) ? - RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED; + TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF; } -static void bluetooth_update_rfk(void) +static int bluetooth_set_status(enum tpacpi_rfkill_state state) { int status; - if (!tpacpi_bluetooth_rfkill) - return; - - status = bluetooth_get_radiosw(); - if (status < 0) - return; - rfkill_force_state(tpacpi_bluetooth_rfkill, status); - vdbg_printk(TPACPI_DBG_RFKILL, - "forced rfkill state to %d\n", - status); -} - -static int bluetooth_set_radiosw(int radio_on, int update_rfk) -{ - int status; - - if (!tp_features.bluetooth) - return -ENODEV; - - /* WLSW overrides bluetooth in firmware/hardware, but there is no - * reason to risk weird behaviour. */ - if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status - && radio_on) - return -EPERM; - - vdbg_printk(TPACPI_DBG_RFKILL, - "will %s bluetooth\n", radio_on ? "enable" : "disable"); + "will attempt to %s bluetooth\n", + (state == TPACPI_RFK_RADIO_ON) ? "enable" : "disable"); #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES if (dbg_bluetoothemul) { - tpacpi_bluetooth_emulstate = !!radio_on; - if (update_rfk) - bluetooth_update_rfk(); + tpacpi_bluetooth_emulstate = (state == TPACPI_RFK_RADIO_ON); return 0; } #endif /* We make sure to keep TP_ACPI_BLUETOOTH_RESUMECTRL off */ - if (radio_on) + if (state == TPACPI_RFK_RADIO_ON) status = TP_ACPI_BLUETOOTH_RADIOSSW; else status = 0; + if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status)) return -EIO; - if (update_rfk) - bluetooth_update_rfk(); - return 0; } @@ -3152,35 +3412,16 @@ static ssize_t bluetooth_enable_show(struct device *dev, struct device_attribute *attr, char *buf) { - int status; - - printk_deprecated_rfkill_attribute("bluetooth_enable"); - - status = bluetooth_get_radiosw(); - if (status < 0) - return status; - - return snprintf(buf, PAGE_SIZE, "%d\n", - (status == RFKILL_STATE_UNBLOCKED) ? 1 : 0); + return tpacpi_rfk_sysfs_enable_show(TPACPI_RFK_BLUETOOTH_SW_ID, + attr, buf); } static ssize_t bluetooth_enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - unsigned long t; - int res; - - printk_deprecated_rfkill_attribute("bluetooth_enable"); - - if (parse_strtoul(buf, 1, &t)) - return -EINVAL; - - tpacpi_disclose_usertask("bluetooth_enable", "set to %ld\n", t); - - res = bluetooth_set_radiosw(t, 1); - - return (res) ? res : count; + return tpacpi_rfk_sysfs_enable_store(TPACPI_RFK_BLUETOOTH_SW_ID, + attr, buf, count); } static struct device_attribute dev_attr_bluetooth_enable = @@ -3198,23 +3439,10 @@ static const struct attribute_group bluetooth_attr_group = { .attrs = bluetooth_attributes, }; -static int tpacpi_bluetooth_rfk_get(void *data, enum rfkill_state *state) -{ - int bts = bluetooth_get_radiosw(); - - if (bts < 0) - return bts; - - *state = bts; - return 0; -} - -static int tpacpi_bluetooth_rfk_set(void *data, enum rfkill_state state) -{ - dbg_printk(TPACPI_DBG_RFKILL, - "request to change radio state to %d\n", state); - return bluetooth_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0); -} +static const struct tpacpi_rfk_ops bluetooth_tprfk_ops = { + .get_status = bluetooth_get_status, + .set_status = bluetooth_set_status, +}; static void bluetooth_shutdown(void) { @@ -3230,13 +3458,12 @@ static void bluetooth_shutdown(void) static void bluetooth_exit(void) { - bluetooth_shutdown(); - - if (tpacpi_bluetooth_rfkill) - rfkill_unregister(tpacpi_bluetooth_rfkill); - sysfs_remove_group(&tpacpi_pdev->dev.kobj, &bluetooth_attr_group); + + tpacpi_destroy_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID); + + bluetooth_shutdown(); } static int __init bluetooth_init(struct ibm_init_struct *iibm) @@ -3277,20 +3504,18 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm) if (!tp_features.bluetooth) return 1; - res = sysfs_create_group(&tpacpi_pdev->dev.kobj, - &bluetooth_attr_group); - if (res) - return res; - res = tpacpi_new_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID, - &tpacpi_bluetooth_rfkill, + &bluetooth_tprfk_ops, RFKILL_TYPE_BLUETOOTH, TPACPI_RFK_BLUETOOTH_SW_NAME, - true, - tpacpi_bluetooth_rfk_set, - tpacpi_bluetooth_rfk_get); + true); + if (res) + return res; + + res = sysfs_create_group(&tpacpi_pdev->dev.kobj, + &bluetooth_attr_group); if (res) { - bluetooth_exit(); + tpacpi_destroy_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID); return res; } @@ -3300,46 +3525,12 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm) /* procfs -------------------------------------------------------------- */ static int bluetooth_read(char *p) { - int len = 0; - int status = bluetooth_get_radiosw(); - - if (!tp_features.bluetooth) - len += sprintf(p + len, "status:\t\tnot supported\n"); - else { - len += sprintf(p + len, "status:\t\t%s\n", - (status == RFKILL_STATE_UNBLOCKED) ? - "enabled" : "disabled"); - len += sprintf(p + len, "commands:\tenable, disable\n"); - } - - return len; + return tpacpi_rfk_procfs_read(TPACPI_RFK_BLUETOOTH_SW_ID, p); } static int bluetooth_write(char *buf) { - char *cmd; - int state = -1; - - if (!tp_features.bluetooth) - return -ENODEV; - - while ((cmd = next_cmd(&buf))) { - if (strlencmp(cmd, "enable") == 0) { - state = 1; - } else if (strlencmp(cmd, "disable") == 0) { - state = 0; - } else - return -EINVAL; - } - - if (state != -1) { - tpacpi_disclose_usertask("procfs bluetooth", - "attempt to %s\n", - state ? "enable" : "disable"); - bluetooth_set_radiosw(state, 1); - } - - return 0; + return tpacpi_rfk_procfs_write(TPACPI_RFK_BLUETOOTH_SW_ID, buf); } static struct ibm_struct bluetooth_driver_data = { @@ -3365,8 +3556,6 @@ enum { #define TPACPI_RFK_WWAN_SW_NAME "tpacpi_wwan_sw" -static struct rfkill *tpacpi_wan_rfkill; - static void wan_suspend(pm_message_t state) { /* Try to make sure radio will resume powered off */ @@ -3376,83 +3565,47 @@ static void wan_suspend(pm_message_t state) "WWAN power down on resume request failed\n"); } -static int wan_get_radiosw(void) +static int wan_get_status(void) { int status; - if (!tp_features.wan) - return -ENODEV; - - /* WLSW overrides WWAN in firmware/hardware, reflect that */ - if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status) - return RFKILL_STATE_HARD_BLOCKED; - #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES if (dbg_wwanemul) return (tpacpi_wwan_emulstate) ? - RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED; + TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF; #endif if (!acpi_evalf(hkey_handle, &status, "GWAN", "d")) return -EIO; return ((status & TP_ACPI_WANCARD_RADIOSSW) != 0) ? - RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED; -} - -static void wan_update_rfk(void) -{ - int status; - - if (!tpacpi_wan_rfkill) - return; - - status = wan_get_radiosw(); - if (status < 0) - return; - rfkill_force_state(tpacpi_wan_rfkill, status); - - vdbg_printk(TPACPI_DBG_RFKILL, - "forced rfkill state to %d\n", - status); + TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF; } -static int wan_set_radiosw(int radio_on, int update_rfk) +static int wan_set_status(enum tpacpi_rfkill_state state) { int status; - if (!tp_features.wan) - return -ENODEV; - - /* WLSW overrides bluetooth in firmware/hardware, but there is no - * reason to risk weird behaviour. */ - if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status - && radio_on) - return -EPERM; - vdbg_printk(TPACPI_DBG_RFKILL, - "will %s WWAN\n", radio_on ? "enable" : "disable"); + "will attempt to %s wwan\n", + (state == TPACPI_RFK_RADIO_ON) ? "enable" : "disable"); #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES if (dbg_wwanemul) { - tpacpi_wwan_emulstate = !!radio_on; - if (update_rfk) - wan_update_rfk(); + tpacpi_wwan_emulstate = (state == TPACPI_RFK_RADIO_ON); return 0; } #endif /* We make sure to keep TP_ACPI_WANCARD_RESUMECTRL off */ - if (radio_on) + if (state == TPACPI_RFK_RADIO_ON) status = TP_ACPI_WANCARD_RADIOSSW; else status = 0; + if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status)) return -EIO; - if (update_rfk) - wan_update_rfk(); - return 0; } @@ -3461,35 +3614,16 @@ static ssize_t wan_enable_show(struct device *dev, struct device_attribute *attr, char *buf) { - int status; - - printk_deprecated_rfkill_attribute("wwan_enable"); - - status = wan_get_radiosw(); - if (status < 0) - return status; - - return snprintf(buf, PAGE_SIZE, "%d\n", - (status == RFKILL_STATE_UNBLOCKED) ? 1 : 0); + return tpacpi_rfk_sysfs_enable_show(TPACPI_RFK_WWAN_SW_ID, + attr, buf); } static ssize_t wan_enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - unsigned long t; - int res; - - printk_deprecated_rfkill_attribute("wwan_enable"); - - if (parse_strtoul(buf, 1, &t)) - return -EINVAL; - - tpacpi_disclose_usertask("wwan_enable", "set to %ld\n", t); - - res = wan_set_radiosw(t, 1); - - return (res) ? res : count; + return tpacpi_rfk_sysfs_enable_store(TPACPI_RFK_WWAN_SW_ID, + attr, buf, count); } static struct device_attribute dev_attr_wan_enable = @@ -3507,23 +3641,10 @@ static const struct attribute_group wan_attr_group = { .attrs = wan_attributes, }; -static int tpacpi_wan_rfk_get(void *data, enum rfkill_state *state) -{ - int wans = wan_get_radiosw(); - - if (wans < 0) - return wans; - - *state = wans; - return 0; -} - -static int tpacpi_wan_rfk_set(void *data, enum rfkill_state state) -{ - dbg_printk(TPACPI_DBG_RFKILL, - "request to change radio state to %d\n", state); - return wan_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0); -} +static const struct tpacpi_rfk_ops wan_tprfk_ops = { + .get_status = wan_get_status, + .set_status = wan_set_status, +}; static void wan_shutdown(void) { @@ -3539,13 +3660,12 @@ static void wan_shutdown(void) static void wan_exit(void) { - wan_shutdown(); - - if (tpacpi_wan_rfkill) - rfkill_unregister(tpacpi_wan_rfkill); - sysfs_remove_group(&tpacpi_pdev->dev.kobj, &wan_attr_group); + + tpacpi_destroy_rfkill(TPACPI_RFK_WWAN_SW_ID); + + wan_shutdown(); } static int __init wan_init(struct ibm_init_struct *iibm) @@ -3584,20 +3704,19 @@ static int __init wan_init(struct ibm_init_struct *iibm) if (!tp_features.wan) return 1; - res = sysfs_create_group(&tpacpi_pdev->dev.kobj, - &wan_attr_group); - if (res) - return res; - res = tpacpi_new_rfkill(TPACPI_RFK_WWAN_SW_ID, - &tpacpi_wan_rfkill, + &wan_tprfk_ops, RFKILL_TYPE_WWAN, TPACPI_RFK_WWAN_SW_NAME, - true, - tpacpi_wan_rfk_set, - tpacpi_wan_rfk_get); + true); + if (res) + return res; + + res = sysfs_create_group(&tpacpi_pdev->dev.kobj, + &wan_attr_group); + if (res) { - wan_exit(); + tpacpi_destroy_rfkill(TPACPI_RFK_WWAN_SW_ID); return res; } @@ -3607,48 +3726,12 @@ static int __init wan_init(struct ibm_init_struct *iibm) /* procfs -------------------------------------------------------------- */ static int wan_read(char *p) { - int len = 0; - int status = wan_get_radiosw(); - - tpacpi_disclose_usertask("procfs wan", "read"); - - if (!tp_features.wan) - len += sprintf(p + len, "status:\t\tnot supported\n"); - else { - len += sprintf(p + len, "status:\t\t%s\n", - (status == RFKILL_STATE_UNBLOCKED) ? - "enabled" : "disabled"); - len += sprintf(p + len, "commands:\tenable, disable\n"); - } - - return len; + return tpacpi_rfk_procfs_read(TPACPI_RFK_WWAN_SW_ID, p); } static int wan_write(char *buf) { - char *cmd; - int state = -1; - - if (!tp_features.wan) - return -ENODEV; - - while ((cmd = next_cmd(&buf))) { - if (strlencmp(cmd, "enable") == 0) { - state = 1; - } else if (strlencmp(cmd, "disable") == 0) { - state = 0; - } else - return -EINVAL; - } - - if (state != -1) { - tpacpi_disclose_usertask("procfs wan", - "attempt to %s\n", - state ? "enable" : "disable"); - wan_set_radiosw(state, 1); - } - - return 0; + return tpacpi_rfk_procfs_write(TPACPI_RFK_WWAN_SW_ID, buf); } static struct ibm_struct wan_driver_data = { @@ -3672,108 +3755,59 @@ enum { #define TPACPI_RFK_UWB_SW_NAME "tpacpi_uwb_sw" -static struct rfkill *tpacpi_uwb_rfkill; - -static int uwb_get_radiosw(void) +static int uwb_get_status(void) { int status; - if (!tp_features.uwb) - return -ENODEV; - - /* WLSW overrides UWB in firmware/hardware, reflect that */ - if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status) - return RFKILL_STATE_HARD_BLOCKED; - #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES if (dbg_uwbemul) return (tpacpi_uwb_emulstate) ? - RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED; + TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF; #endif if (!acpi_evalf(hkey_handle, &status, "GUWB", "d")) return -EIO; return ((status & TP_ACPI_UWB_RADIOSSW) != 0) ? - RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED; + TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF; } -static void uwb_update_rfk(void) +static int uwb_set_status(enum tpacpi_rfkill_state state) { int status; - if (!tpacpi_uwb_rfkill) - return; - - status = uwb_get_radiosw(); - if (status < 0) - return; - rfkill_force_state(tpacpi_uwb_rfkill, status); - vdbg_printk(TPACPI_DBG_RFKILL, - "forced rfkill state to %d\n", - status); -} - -static int uwb_set_radiosw(int radio_on, int update_rfk) -{ - int status; - - if (!tp_features.uwb) - return -ENODEV; - - /* WLSW overrides UWB in firmware/hardware, but there is no - * reason to risk weird behaviour. */ - if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status - && radio_on) - return -EPERM; - - vdbg_printk(TPACPI_DBG_RFKILL, - "will %s UWB\n", radio_on ? "enable" : "disable"); + "will attempt to %s UWB\n", + (state == TPACPI_RFK_RADIO_ON) ? "enable" : "disable"); #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES if (dbg_uwbemul) { - tpacpi_uwb_emulstate = !!radio_on; - if (update_rfk) - uwb_update_rfk(); + tpacpi_uwb_emulstate = (state == TPACPI_RFK_RADIO_ON); return 0; } #endif - status = (radio_on) ? TP_ACPI_UWB_RADIOSSW : 0; + if (state == TPACPI_RFK_RADIO_ON) + status = TP_ACPI_UWB_RADIOSSW; + else + status = 0; + if (!acpi_evalf(hkey_handle, NULL, "SUWB", "vd", status)) return -EIO; - if (update_rfk) - uwb_update_rfk(); - return 0; } /* --------------------------------------------------------------------- */ -static int tpacpi_uwb_rfk_get(void *data, enum rfkill_state *state) -{ - int uwbs = uwb_get_radiosw(); - - if (uwbs < 0) - return uwbs; - - *state = uwbs; - return 0; -} - -static int tpacpi_uwb_rfk_set(void *data, enum rfkill_state state) -{ - dbg_printk(TPACPI_DBG_RFKILL, - "request to change radio state to %d\n", state); - return uwb_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0); -} +static const struct tpacpi_rfk_ops uwb_tprfk_ops = { + .get_status = uwb_get_status, + .set_status = uwb_set_status, +}; static void uwb_exit(void) { - if (tpacpi_uwb_rfkill) - rfkill_unregister(tpacpi_uwb_rfkill); + tpacpi_destroy_rfkill(TPACPI_RFK_UWB_SW_ID); } static int __init uwb_init(struct ibm_init_struct *iibm) @@ -3813,13 +3847,10 @@ static int __init uwb_init(struct ibm_init_struct *iibm) return 1; res = tpacpi_new_rfkill(TPACPI_RFK_UWB_SW_ID, - &tpacpi_uwb_rfkill, + &uwb_tprfk_ops, RFKILL_TYPE_UWB, TPACPI_RFK_UWB_SW_NAME, - false, - tpacpi_uwb_rfk_set, - tpacpi_uwb_rfk_get); - + false); return res; } diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 4345089..81d31ea 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -45,7 +45,6 @@ #include #include #include -#include #include @@ -250,21 +249,15 @@ static acpi_status hci_read2(u32 reg, u32 *out1, u32 *out2, u32 *result) struct toshiba_acpi_dev { struct platform_device *p_dev; - struct rfkill *rfk_dev; - struct input_polled_dev *poll_dev; + struct rfkill *bt_rfk; const char *bt_name; - const char *rfk_name; - - bool last_rfk_state; struct mutex mutex; }; static struct toshiba_acpi_dev toshiba_acpi = { .bt_name = "Toshiba Bluetooth", - .rfk_name = "Toshiba RFKill Switch", - .last_rfk_state = false, }; /* Bluetooth rfkill handlers */ @@ -283,21 +276,6 @@ static u32 hci_get_bt_present(bool *present) return hci_result; } -static u32 hci_get_bt_on(bool *on) -{ - u32 hci_result; - u32 value, value2; - - value = 0; - value2 = 0x0001; - hci_read2(HCI_WIRELESS, &value, &value2, &hci_result); - if (hci_result == HCI_SUCCESS) - *on = (value & HCI_WIRELESS_BT_POWER) && - (value & HCI_WIRELESS_BT_ATTACH); - - return hci_result; -} - static u32 hci_get_radio_state(bool *radio_state) { u32 hci_result; @@ -311,70 +289,67 @@ static u32 hci_get_radio_state(bool *radio_state) return hci_result; } -static int bt_rfkill_toggle_radio(void *data, enum rfkill_state state) +static int bt_rfkill_set_block(void *data, bool blocked) { + struct toshiba_acpi_dev *dev = data; u32 result1, result2; u32 value; + int err; bool radio_state; - struct toshiba_acpi_dev *dev = data; - value = (state == RFKILL_STATE_UNBLOCKED); + value = (blocked == false); - if (hci_get_radio_state(&radio_state) != HCI_SUCCESS) - return -EFAULT; + mutex_lock(&dev->mutex); + if (hci_get_radio_state(&radio_state) != HCI_SUCCESS) { + err = -EBUSY; + goto out; + } - switch (state) { - case RFKILL_STATE_UNBLOCKED: - if (!radio_state) - return -EPERM; - break; - case RFKILL_STATE_SOFT_BLOCKED: - break; - default: - return -EINVAL; + if (!radio_state) { + err = 0; + goto out; } - mutex_lock(&dev->mutex); hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER, &result1); hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH, &result2); - mutex_unlock(&dev->mutex); if (result1 != HCI_SUCCESS || result2 != HCI_SUCCESS) - return -EFAULT; - - return 0; + err = -EBUSY; + else + err = 0; + out: + mutex_unlock(&dev->mutex); + return err; } -static void bt_poll_rfkill(struct input_polled_dev *poll_dev) +static void bt_rfkill_poll(struct rfkill *rfkill, void *data) { - bool state_changed; bool new_rfk_state; bool value; u32 hci_result; - struct toshiba_acpi_dev *dev = poll_dev->private; + struct toshiba_acpi_dev *dev = data; + + mutex_lock(&dev->mutex); hci_result = hci_get_radio_state(&value); - if (hci_result != HCI_SUCCESS) - return; /* Can't do anything useful */ + if (hci_result != HCI_SUCCESS) { + /* Can't do anything useful */ + mutex_unlock(&dev->mutex); + } new_rfk_state = value; - mutex_lock(&dev->mutex); - state_changed = new_rfk_state != dev->last_rfk_state; - dev->last_rfk_state = new_rfk_state; mutex_unlock(&dev->mutex); - if (unlikely(state_changed)) { - rfkill_force_state(dev->rfk_dev, - new_rfk_state ? - RFKILL_STATE_SOFT_BLOCKED : - RFKILL_STATE_HARD_BLOCKED); - input_report_switch(poll_dev->input, SW_RFKILL_ALL, - new_rfk_state); - input_sync(poll_dev->input); - } + if (rfkill_set_hw_state(rfkill, !new_rfk_state)) + bt_rfkill_set_block(data, true); } +static const struct rfkill_ops toshiba_rfk_ops = { + .set_block = bt_rfkill_set_block, + .poll = bt_rfkill_poll, +}; + static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ; static struct backlight_device *toshiba_backlight_device; static int force_fan; @@ -702,14 +677,11 @@ static struct backlight_ops toshiba_backlight_data = { static void toshiba_acpi_exit(void) { - if (toshiba_acpi.poll_dev) { - input_unregister_polled_device(toshiba_acpi.poll_dev); - input_free_polled_device(toshiba_acpi.poll_dev); + if (toshiba_acpi.bt_rfk) { + rfkill_unregister(toshiba_acpi.bt_rfk); + rfkill_destroy(toshiba_acpi.bt_rfk); } - if (toshiba_acpi.rfk_dev) - rfkill_unregister(toshiba_acpi.rfk_dev); - if (toshiba_backlight_device) backlight_device_unregister(toshiba_backlight_device); @@ -728,8 +700,6 @@ static int __init toshiba_acpi_init(void) acpi_status status = AE_OK; u32 hci_result; bool bt_present; - bool bt_on; - bool radio_on; int ret = 0; if (acpi_disabled) @@ -793,60 +763,21 @@ static int __init toshiba_acpi_init(void) /* Register rfkill switch for Bluetooth */ if (hci_get_bt_present(&bt_present) == HCI_SUCCESS && bt_present) { - toshiba_acpi.rfk_dev = rfkill_allocate(&toshiba_acpi.p_dev->dev, - RFKILL_TYPE_BLUETOOTH); - if (!toshiba_acpi.rfk_dev) { + toshiba_acpi.bt_rfk = rfkill_alloc(toshiba_acpi.bt_name, + &toshiba_acpi.p_dev->dev, + RFKILL_TYPE_BLUETOOTH, + &toshiba_rfk_ops, + &toshiba_acpi); + if (!toshiba_acpi.bt_rfk) { printk(MY_ERR "unable to allocate rfkill device\n"); toshiba_acpi_exit(); return -ENOMEM; } - toshiba_acpi.rfk_dev->name = toshiba_acpi.bt_name; - toshiba_acpi.rfk_dev->toggle_radio = bt_rfkill_toggle_radio; - toshiba_acpi.rfk_dev->data = &toshiba_acpi; - - if (hci_get_bt_on(&bt_on) == HCI_SUCCESS && bt_on) { - toshiba_acpi.rfk_dev->state = RFKILL_STATE_UNBLOCKED; - } else if (hci_get_radio_state(&radio_on) == HCI_SUCCESS && - radio_on) { - toshiba_acpi.rfk_dev->state = RFKILL_STATE_SOFT_BLOCKED; - } else { - toshiba_acpi.rfk_dev->state = RFKILL_STATE_HARD_BLOCKED; - } - - ret = rfkill_register(toshiba_acpi.rfk_dev); + ret = rfkill_register(toshiba_acpi.bt_rfk); if (ret) { printk(MY_ERR "unable to register rfkill device\n"); - toshiba_acpi_exit(); - return -ENOMEM; - } - - /* Register input device for kill switch */ - toshiba_acpi.poll_dev = input_allocate_polled_device(); - if (!toshiba_acpi.poll_dev) { - printk(MY_ERR - "unable to allocate kill-switch input device\n"); - toshiba_acpi_exit(); - return -ENOMEM; - } - toshiba_acpi.poll_dev->private = &toshiba_acpi; - toshiba_acpi.poll_dev->poll = bt_poll_rfkill; - toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */ - - toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name; - toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST; - /* Toshiba USB ID */ - toshiba_acpi.poll_dev->input->id.vendor = 0x0930; - set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); - set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); - input_report_switch(toshiba_acpi.poll_dev->input, - SW_RFKILL_ALL, TRUE); - input_sync(toshiba_acpi.poll_dev->input); - - ret = input_register_polled_device(toshiba_acpi.poll_dev); - if (ret) { - printk(MY_ERR - "unable to register kill-switch input device\n"); + rfkill_destroy(toshiba_acpi.bt_rfk); toshiba_acpi_exit(); return ret; } diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 3f0eaa3..7e09c5c 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -311,6 +311,7 @@ unifdef-y += ptrace.h unifdef-y += qnx4_fs.h unifdef-y += quota.h unifdef-y += random.h +unifdef-y += rfkill.h unifdef-y += irqnr.h unifdef-y += reboot.h unifdef-y += reiserfs_fs.h diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index de18ef2..090852c 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -4,6 +4,7 @@ /* * Copyright (C) 2006 - 2007 Ivo van Doorn * Copyright (C) 2007 Dmitry Torokhov + * Copyright 2009 Johannes Berg * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,6 +22,24 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* define userspace visible states */ +#define RFKILL_STATE_SOFT_BLOCKED 0 +#define RFKILL_STATE_UNBLOCKED 1 +#define RFKILL_STATE_HARD_BLOCKED 2 + +/* and that's all userspace gets */ +#ifdef __KERNEL__ +/* don't allow anyone to use these in the kernel */ +enum rfkill_user_states { + RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED, + RFKILL_USER_STATE_UNBLOCKED = RFKILL_STATE_UNBLOCKED, + RFKILL_USER_STATE_HARD_BLOCKED = RFKILL_STATE_HARD_BLOCKED, +}; +#undef RFKILL_STATE_SOFT_BLOCKED +#undef RFKILL_STATE_UNBLOCKED +#undef RFKILL_STATE_HARD_BLOCKED + #include #include #include @@ -30,109 +49,267 @@ /** * enum rfkill_type - type of rfkill switch. - * RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. - * RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. - * RFKILL_TYPE_UWB: switch is on a ultra wideband device. - * RFKILL_TYPE_WIMAX: switch is on a WiMAX device. - * RFKILL_TYPE_WWAN: switch is on a wireless WAN device. + * + * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. + * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. + * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. + * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device. + * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device. + * @NUM_RFKILL_TYPES: number of defined rfkill types */ enum rfkill_type { - RFKILL_TYPE_WLAN , + RFKILL_TYPE_WLAN, RFKILL_TYPE_BLUETOOTH, RFKILL_TYPE_UWB, RFKILL_TYPE_WIMAX, RFKILL_TYPE_WWAN, - RFKILL_TYPE_MAX, + NUM_RFKILL_TYPES, }; -enum rfkill_state { - RFKILL_STATE_SOFT_BLOCKED = 0, /* Radio output blocked */ - RFKILL_STATE_UNBLOCKED = 1, /* Radio output allowed */ - RFKILL_STATE_HARD_BLOCKED = 2, /* Output blocked, non-overrideable */ - RFKILL_STATE_MAX, /* marker for last valid state */ +/* this is opaque */ +struct rfkill; + +/** + * struct rfkill_ops - rfkill driver methods + * + * @poll: poll the rfkill block state(s) -- only assign this method + * when you need polling. When called, simply call one of the + * rfkill_set{,_hw,_sw}_state family of functions. If the hw + * is getting unblocked you need to take into account the return + * value of those functions to make sure the software block is + * properly used. + * @query: query the rfkill block state(s) and call exactly one of the + * rfkill_set{,_hw,_sw}_state family of functions. Assign this + * method if input events can cause hardware state changes to make + * the rfkill core query your driver before setting a requested + * block. + * @set_block: turn the transmitter on (blocked == false) or off + * (blocked == true) -- this is called only while the transmitter + * is not hard-blocked, but note that the core's view of whether + * the transmitter is hard-blocked might differ from your driver's + * view due to race conditions, so it is possible that it is still + * called at the same time as you are calling rfkill_set_hw_state(). + * This callback must be assigned. + */ +struct rfkill_ops { + void (*poll)(struct rfkill *rfkill, void *data); + void (*query)(struct rfkill *rfkill, void *data); + int (*set_block)(void *data, bool blocked); }; +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) /** - * struct rfkill - rfkill control structure. - * @name: Name of the switch. - * @type: Radio type which the button controls, the value stored - * here should be a value from enum rfkill_type. - * @state: State of the switch, "UNBLOCKED" means radio can operate. - * @mutex: Guards switch state transitions. It serializes callbacks - * and also protects the state. - * @data: Pointer to the RF button drivers private data which will be - * passed along when toggling radio state. - * @toggle_radio(): Mandatory handler to control state of the radio. - * only RFKILL_STATE_SOFT_BLOCKED and RFKILL_STATE_UNBLOCKED are - * valid parameters. - * @get_state(): handler to read current radio state from hardware, - * may be called from atomic context, should return 0 on success. - * Either this handler OR judicious use of rfkill_force_state() is - * MANDATORY for any driver capable of RFKILL_STATE_HARD_BLOCKED. - * @led_trigger: A LED trigger for this button's LED. - * @dev: Device structure integrating the switch into device tree. - * @node: Used to place switch into list of all switches known to the - * the system. - * - * This structure represents a RF switch located on a network device. + * rfkill_alloc - allocate rfkill structure + * @name: name of the struct -- the string is not copied internally + * @parent: device that has rf switch on it + * @type: type of the switch (RFKILL_TYPE_*) + * @ops: rfkill methods + * @ops_data: data passed to each method + * + * This function should be called by the transmitter driver to allocate an + * rfkill structure. Returns %NULL on failure. */ -struct rfkill { - const char *name; - enum rfkill_type type; - - /* the mutex serializes callbacks and also protects - * the state */ - struct mutex mutex; - enum rfkill_state state; - void *data; - int (*toggle_radio)(void *data, enum rfkill_state state); - int (*get_state)(void *data, enum rfkill_state *state); +struct rfkill * __must_check rfkill_alloc(const char *name, + struct device *parent, + const enum rfkill_type type, + const struct rfkill_ops *ops, + void *ops_data); -#ifdef CONFIG_RFKILL_LEDS - struct led_trigger led_trigger; -#endif +/** + * rfkill_register - Register a rfkill structure. + * @rfkill: rfkill structure to be registered + * + * This function should be called by the transmitter driver to register + * the rfkill structure needs to be registered. Before calling this function + * the driver needs to be ready to service method calls from rfkill. + */ +int __must_check rfkill_register(struct rfkill *rfkill); - struct device dev; - struct list_head node; - enum rfkill_state state_for_resume; -}; -#define to_rfkill(d) container_of(d, struct rfkill, dev) +/** + * rfkill_pause_polling(struct rfkill *rfkill) + * + * Pause polling -- say transmitter is off for other reasons. + * NOTE: not necessary for suspend/resume -- in that case the + * core stops polling anyway + */ +void rfkill_pause_polling(struct rfkill *rfkill); -struct rfkill * __must_check rfkill_allocate(struct device *parent, - enum rfkill_type type); -void rfkill_free(struct rfkill *rfkill); -int __must_check rfkill_register(struct rfkill *rfkill); +/** + * rfkill_resume_polling(struct rfkill *rfkill) + * + * Pause polling -- say transmitter is off for other reasons. + * NOTE: not necessary for suspend/resume -- in that case the + * core stops polling anyway + */ +void rfkill_resume_polling(struct rfkill *rfkill); + + +/** + * rfkill_unregister - Unregister a rfkill structure. + * @rfkill: rfkill structure to be unregistered + * + * This function should be called by the network driver during device + * teardown to destroy rfkill structure. Until it returns, the driver + * needs to be able to service method calls. + */ void rfkill_unregister(struct rfkill *rfkill); -int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state); -int rfkill_set_default(enum rfkill_type type, enum rfkill_state state); +/** + * rfkill_destroy - free rfkill structure + * @rfkill: rfkill structure to be destroyed + * + * Destroys the rfkill structure. + */ +void rfkill_destroy(struct rfkill *rfkill); + +/** + * rfkill_set_hw_state - Set the internal rfkill hardware block state + * @rfkill: pointer to the rfkill class to modify. + * @state: the current hardware block state to set + * + * rfkill drivers that get events when the hard-blocked state changes + * use this function to notify the rfkill core (and through that also + * userspace) of the current state -- they should also use this after + * resume if the state could have changed. + * + * You need not (but may) call this function if poll_state is assigned. + * + * This function can be called in any context, even from within rfkill + * callbacks. + * + * The function returns the combined block state (true if transmitter + * should be blocked) so that drivers need not keep track of the soft + * block state -- which they might not be able to. + */ +bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked); + +/** + * rfkill_set_sw_state - Set the internal rfkill software block state + * @rfkill: pointer to the rfkill class to modify. + * @state: the current software block state to set + * + * rfkill drivers that get events when the soft-blocked state changes + * (yes, some platforms directly act on input but allow changing again) + * use this function to notify the rfkill core (and through that also + * userspace) of the current state -- they should also use this after + * resume if the state could have changed. + * + * This function can be called in any context, even from within rfkill + * callbacks. + * + * The function returns the combined block state (true if transmitter + * should be blocked). + */ +bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked); + +/** + * rfkill_set_states - Set the internal rfkill block states + * @rfkill: pointer to the rfkill class to modify. + * @sw: the current software block state to set + * @hw: the current hardware block state to set + * + * This function can be called in any context, even from within rfkill + * callbacks. + */ +void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw); /** - * rfkill_state_complement - return complementar state - * @state: state to return the complement of + * rfkill_set_global_sw_state - set global sw block default + * @type: rfkill type to set default for + * @blocked: default to set * - * Returns RFKILL_STATE_SOFT_BLOCKED if @state is RFKILL_STATE_UNBLOCKED, - * returns RFKILL_STATE_UNBLOCKED otherwise. + * This function sets the global default -- use at boot if your platform has + * an rfkill switch. If not early enough this call may be ignored. + * + * XXX: instead of ignoring -- how about just updating all currently + * registered drivers? */ -static inline enum rfkill_state rfkill_state_complement(enum rfkill_state state) +void rfkill_set_global_sw_state(const enum rfkill_type type, bool blocked); +#else /* !RFKILL */ +static inline struct rfkill * __must_check +rfkill_alloc(const char *name, + struct device *parent, + const enum rfkill_type type, + const struct rfkill_ops *ops, + void *ops_data) +{ + return ERR_PTR(-ENODEV); +} + +static inline int __must_check rfkill_register(struct rfkill *rfkill) +{ + if (rfkill == ERR_PTR(-ENODEV)) + return 0; + return -EINVAL; +} + +static inline void rfkill_pause_polling(struct rfkill *rfkill) +{ +} + +static inline void rfkill_resume_polling(struct rfkill *rfkill) +{ +} + +static inline void rfkill_unregister(struct rfkill *rfkill) +{ +} + +static inline void rfkill_destroy(struct rfkill *rfkill) +{ +} + +static inline bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked) +{ + return blocked; +} + +static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked) +{ + return blocked; +} + +static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw) +{ +} + +static inline void rfkill_set_global_sw_state(const enum rfkill_type type, + bool blocked) { - return (state == RFKILL_STATE_UNBLOCKED) ? - RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED; } +#endif /* RFKILL || RFKILL_MODULE */ + +#ifdef CONFIG_RFKILL_LEDS /** - * rfkill_get_led_name - Get the LED trigger name for the button's LED. + * rfkill_get_led_trigger_name - Get the LED trigger name for the button's LED. * This function might return a NULL pointer if registering of the - * LED trigger failed. - * Use this as "default_trigger" for the LED. + * LED trigger failed. Use this as "default_trigger" for the LED. */ -static inline char *rfkill_get_led_name(struct rfkill *rfkill) -{ -#ifdef CONFIG_RFKILL_LEDS - return (char *)(rfkill->led_trigger.name); +const char *rfkill_get_led_trigger_name(struct rfkill *rfkill); + +/** + * rfkill_set_led_trigger_name -- set the LED trigger name + * @rfkill: rfkill struct + * @name: LED trigger name + * + * This function sets the LED trigger name of the radio LED + * trigger that rfkill creates. It is optional, but if called + * must be called before rfkill_register() to be effective. + */ +void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name); #else +static inline const char *rfkill_get_led_trigger_name(struct rfkill *rfkill) +{ return NULL; -#endif } +static inline void +rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name) +{ +} +#endif + +#endif /* __KERNEL__ */ + #endif /* RFKILL_H */ diff --git a/include/net/wimax.h b/include/net/wimax.h index 6b3824e..2af7bf8 100644 --- a/include/net/wimax.h +++ b/include/net/wimax.h @@ -253,7 +253,6 @@ struct net_device; struct genl_info; struct wimax_dev; -struct input_dev; /** * struct wimax_dev - Generic WiMAX device @@ -293,8 +292,8 @@ struct input_dev; * See wimax_reset()'s documentation. * * @name: [fill] A way to identify this device. We need to register a - * name with many subsystems (input for RFKILL, workqueue - * creation, etc). We can't use the network device name as that + * name with many subsystems (rfkill, workqueue creation, etc). + * We can't use the network device name as that * might change and in some instances we don't know it yet (until * we don't call register_netdev()). So we generate an unique one * using the driver name and device bus id, place it here and use @@ -316,9 +315,6 @@ struct input_dev; * * @rfkill: [private] integration into the RF-Kill infrastructure. * - * @rfkill_input: [private] virtual input device to process the - * hardware RF Kill switches. - * * @rf_sw: [private] State of the software radio switch (OFF/ON) * * @rf_hw: [private] State of the hardware radio switch (OFF/ON) diff --git a/net/rfkill/Kconfig b/net/rfkill/Kconfig index 7f807b3..b47f72f 100644 --- a/net/rfkill/Kconfig +++ b/net/rfkill/Kconfig @@ -10,22 +10,15 @@ menuconfig RFKILL To compile this driver as a module, choose M here: the module will be called rfkill. -config RFKILL_INPUT - tristate "Input layer to RF switch connector" - depends on RFKILL && INPUT - help - Say Y here if you want kernel automatically toggle state - of RF switches on and off when user presses appropriate - button or a key on the keyboard. Without this module you - need a some kind of userspace application to control - state of the switches. - - To compile this driver as a module, choose M here: the - module will be called rfkill-input. - # LED trigger support config RFKILL_LEDS bool - depends on RFKILL && LEDS_TRIGGERS + depends on RFKILL + depends on LEDS_TRIGGERS = y || RFKILL = LEDS_TRIGGERS default y +config RFKILL_INPUT + bool + depends on RFKILL + depends on INPUT = y || RFKILL = INPUT + default y diff --git a/net/rfkill/Makefile b/net/rfkill/Makefile index b38c430..6621053 100644 --- a/net/rfkill/Makefile +++ b/net/rfkill/Makefile @@ -2,5 +2,6 @@ # Makefile for the RF switch subsystem. # -obj-$(CONFIG_RFKILL) += rfkill.o -obj-$(CONFIG_RFKILL_INPUT) += rfkill-input.o +rfkill-y += core.o +rfkill-$(CONFIG_RFKILL_INPUT) += input.o +obj-$(CONFIG_RFKILL) += rfkill.o diff --git a/net/rfkill/core.c b/net/rfkill/core.c new file mode 100644 index 0000000..30a6f8d --- /dev/null +++ b/net/rfkill/core.c @@ -0,0 +1,896 @@ +/* + * Copyright (C) 2006 - 2007 Ivo van Doorn + * Copyright (C) 2007 Dmitry Torokhov + * Copyright 2009 Johannes Berg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "rfkill.h" + +#define POLL_INTERVAL (5 * HZ) + +#define RFKILL_BLOCK_HW BIT(0) +#define RFKILL_BLOCK_SW BIT(1) +#define RFKILL_BLOCK_SW_PREV BIT(2) +#define RFKILL_BLOCK_ANY (RFKILL_BLOCK_HW |\ + RFKILL_BLOCK_SW |\ + RFKILL_BLOCK_SW_PREV) +#define RFKILL_BLOCK_SW_SETCALL BIT(31) + +struct rfkill { + spinlock_t lock; + + const char *name; + enum rfkill_type type; + + unsigned long state; + + bool registered; + bool suspended; + + const struct rfkill_ops *ops; + void *data; + +#ifdef CONFIG_RFKILL_LEDS + struct led_trigger led_trigger; + const char *ledtrigname; +#endif + + struct device dev; + struct list_head node; + + struct delayed_work poll_work; + struct work_struct uevent_work; + struct work_struct sync_work; +}; +#define to_rfkill(d) container_of(d, struct rfkill, dev) + + + +MODULE_AUTHOR("Ivo van Doorn "); +MODULE_AUTHOR("Johannes Berg "); +MODULE_DESCRIPTION("RF switch support"); +MODULE_LICENSE("GPL"); + + +/* + * The locking here should be made much smarter, we currently have + * a bit of a stupid situation because drivers might want to register + * the rfkill struct under their own lock, and take this lock during + * rfkill method calls -- which will cause an AB-BA deadlock situation. + * + * To fix that, we need to rework this code here to be mostly lock-free + * and only use the mutex for list manipulations, not to protect the + * various other global variables. Then we can avoid holding the mutex + * around driver operations, and all is happy. + */ +static LIST_HEAD(rfkill_list); /* list of registered rf switches */ +static DEFINE_MUTEX(rfkill_global_mutex); + +static unsigned int rfkill_default_state = 1; +module_param_named(default_state, rfkill_default_state, uint, 0444); +MODULE_PARM_DESC(default_state, + "Default initial state for all radio types, 0 = radio off"); + +static struct { + bool cur, def; +} rfkill_global_states[NUM_RFKILL_TYPES]; + +static unsigned long rfkill_states_default_locked; + +static bool rfkill_epo_lock_active; + + +#ifdef CONFIG_RFKILL_LEDS +static void rfkill_led_trigger_event(struct rfkill *rfkill) +{ + struct led_trigger *trigger; + + if (!rfkill->registered) + return; + + trigger = &rfkill->led_trigger; + + if (rfkill->state & RFKILL_BLOCK_ANY) + led_trigger_event(trigger, LED_OFF); + else + led_trigger_event(trigger, LED_FULL); +} + +static void rfkill_led_trigger_activate(struct led_classdev *led) +{ + struct rfkill *rfkill; + + rfkill = container_of(led->trigger, struct rfkill, led_trigger); + + rfkill_led_trigger_event(rfkill); +} + +const char *rfkill_get_led_trigger_name(struct rfkill *rfkill) +{ + return rfkill->led_trigger.name; +} +EXPORT_SYMBOL(rfkill_get_led_trigger_name); + +void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name) +{ + BUG_ON(!rfkill); + + rfkill->ledtrigname = name; +} +EXPORT_SYMBOL(rfkill_set_led_trigger_name); + +static int rfkill_led_trigger_register(struct rfkill *rfkill) +{ + rfkill->led_trigger.name = rfkill->ledtrigname + ? : dev_name(&rfkill->dev); + rfkill->led_trigger.activate = rfkill_led_trigger_activate; + return led_trigger_register(&rfkill->led_trigger); +} + +static void rfkill_led_trigger_unregister(struct rfkill *rfkill) +{ + led_trigger_unregister(&rfkill->led_trigger); +} +#else +static void rfkill_led_trigger_event(struct rfkill *rfkill) +{ +} + +static inline int rfkill_led_trigger_register(struct rfkill *rfkill) +{ + return 0; +} + +static inline void rfkill_led_trigger_unregister(struct rfkill *rfkill) +{ +} +#endif /* CONFIG_RFKILL_LEDS */ + +static void rfkill_uevent(struct rfkill *rfkill) +{ + if (!rfkill->registered || rfkill->suspended) + return; + + kobject_uevent(&rfkill->dev.kobj, KOBJ_CHANGE); +} + +static bool __rfkill_set_hw_state(struct rfkill *rfkill, + bool blocked, bool *change) +{ + unsigned long flags; + bool prev, any; + + BUG_ON(!rfkill); + + spin_lock_irqsave(&rfkill->lock, flags); + prev = !!(rfkill->state & RFKILL_BLOCK_HW); + if (blocked) + rfkill->state |= RFKILL_BLOCK_HW; + else + rfkill->state &= ~RFKILL_BLOCK_HW; + *change = prev != blocked; + any = rfkill->state & RFKILL_BLOCK_ANY; + spin_unlock_irqrestore(&rfkill->lock, flags); + + rfkill_led_trigger_event(rfkill); + + return any; +} + +/** + * rfkill_set_block - wrapper for set_block method + * + * @rfkill: the rfkill struct to use + * @blocked: the new software state + * + * Calls the set_block method (when applicable) and handles notifications + * etc. as well. + */ +static void rfkill_set_block(struct rfkill *rfkill, bool blocked) +{ + unsigned long flags; + int err; + + /* + * Some platforms (...!) generate input events which affect the + * _hard_ kill state -- whenever something tries to change the + * current software state query the hardware state too. + */ + if (rfkill->ops->query) + rfkill->ops->query(rfkill, rfkill->data); + + spin_lock_irqsave(&rfkill->lock, flags); + if (rfkill->state & RFKILL_BLOCK_SW) + rfkill->state |= RFKILL_BLOCK_SW_PREV; + else + rfkill->state &= ~RFKILL_BLOCK_SW_PREV; + + if (blocked) + rfkill->state |= RFKILL_BLOCK_SW; + else + rfkill->state &= ~RFKILL_BLOCK_SW; + + rfkill->state |= RFKILL_BLOCK_SW_SETCALL; + spin_unlock_irqrestore(&rfkill->lock, flags); + + if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP)) + return; + + err = rfkill->ops->set_block(rfkill->data, blocked); + + spin_lock_irqsave(&rfkill->lock, flags); + if (err) { + /* + * Failed -- reset status to _prev, this may be different + * from what set set _PREV to earlier in this function + * if rfkill_set_sw_state was invoked. + */ + if (rfkill->state & RFKILL_BLOCK_SW_PREV) + rfkill->state |= RFKILL_BLOCK_SW; + else + rfkill->state &= ~RFKILL_BLOCK_SW; + } + rfkill->state &= ~RFKILL_BLOCK_SW_SETCALL; + rfkill->state &= ~RFKILL_BLOCK_SW_PREV; + spin_unlock_irqrestore(&rfkill->lock, flags); + + rfkill_led_trigger_event(rfkill); + rfkill_uevent(rfkill); +} + +/** + * __rfkill_switch_all - Toggle state of all switches of given type + * @type: type of interfaces to be affected + * @state: the new state + * + * This function sets the state of all switches of given type, + * unless a specific switch is claimed by userspace (in which case, + * that switch is left alone) or suspended. + * + * Caller must have acquired rfkill_global_mutex. + */ +static void __rfkill_switch_all(const enum rfkill_type type, bool blocked) +{ + struct rfkill *rfkill; + + rfkill_global_states[type].cur = blocked; + list_for_each_entry(rfkill, &rfkill_list, node) { + if (rfkill->type != type) + continue; + + rfkill_set_block(rfkill, blocked); + } +} + +/** + * rfkill_switch_all - Toggle state of all switches of given type + * @type: type of interfaces to be affected + * @state: the new state + * + * Acquires rfkill_global_mutex and calls __rfkill_switch_all(@type, @state). + * Please refer to __rfkill_switch_all() for details. + * + * Does nothing if the EPO lock is active. + */ +void rfkill_switch_all(enum rfkill_type type, bool blocked) +{ + mutex_lock(&rfkill_global_mutex); + + if (!rfkill_epo_lock_active) + __rfkill_switch_all(type, blocked); + + mutex_unlock(&rfkill_global_mutex); +} + +/** + * rfkill_epo - emergency power off all transmitters + * + * This kicks all non-suspended rfkill devices to RFKILL_STATE_SOFT_BLOCKED, + * ignoring everything in its path but rfkill_global_mutex and rfkill->mutex. + * + * The global state before the EPO is saved and can be restored later + * using rfkill_restore_states(). + */ +void rfkill_epo(void) +{ + struct rfkill *rfkill; + int i; + + mutex_lock(&rfkill_global_mutex); + + rfkill_epo_lock_active = true; + list_for_each_entry(rfkill, &rfkill_list, node) + rfkill_set_block(rfkill, true); + + for (i = 0; i < NUM_RFKILL_TYPES; i++) { + rfkill_global_states[i].def = rfkill_global_states[i].cur; + rfkill_global_states[i].cur = true; + } + mutex_unlock(&rfkill_global_mutex); +} + +/** + * rfkill_restore_states - restore global states + * + * Restore (and sync switches to) the global state from the + * states in rfkill_default_states. This can undo the effects of + * a call to rfkill_epo(). + */ +void rfkill_restore_states(void) +{ + int i; + + mutex_lock(&rfkill_global_mutex); + + rfkill_epo_lock_active = false; + for (i = 0; i < NUM_RFKILL_TYPES; i++) + __rfkill_switch_all(i, rfkill_global_states[i].def); + mutex_unlock(&rfkill_global_mutex); +} + +/** + * rfkill_remove_epo_lock - unlock state changes + * + * Used by rfkill-input manually unlock state changes, when + * the EPO switch is deactivated. + */ +void rfkill_remove_epo_lock(void) +{ + mutex_lock(&rfkill_global_mutex); + rfkill_epo_lock_active = false; + mutex_unlock(&rfkill_global_mutex); +} + +/** + * rfkill_is_epo_lock_active - returns true EPO is active + * + * Returns 0 (false) if there is NOT an active EPO contidion, + * and 1 (true) if there is an active EPO contition, which + * locks all radios in one of the BLOCKED states. + * + * Can be called in atomic context. + */ +bool rfkill_is_epo_lock_active(void) +{ + return rfkill_epo_lock_active; +} + +/** + * rfkill_get_global_sw_state - returns global state for a type + * @type: the type to get the global state of + * + * Returns the current global state for a given wireless + * device type. + */ +bool rfkill_get_global_sw_state(const enum rfkill_type type) +{ + return rfkill_global_states[type].cur; +} + +void rfkill_set_global_sw_state(const enum rfkill_type type, bool blocked) +{ + mutex_lock(&rfkill_global_mutex); + + /* don't allow unblock when epo */ + if (rfkill_epo_lock_active && !blocked) + goto out; + + /* too late */ + if (rfkill_states_default_locked & BIT(type)) + goto out; + + rfkill_states_default_locked |= BIT(type); + + rfkill_global_states[type].cur = blocked; + rfkill_global_states[type].def = blocked; + out: + mutex_unlock(&rfkill_global_mutex); +} +EXPORT_SYMBOL(rfkill_set_global_sw_state); + + +bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked) +{ + bool ret, change; + + ret = __rfkill_set_hw_state(rfkill, blocked, &change); + + if (!rfkill->registered) + return ret; + + if (change) + schedule_work(&rfkill->uevent_work); + + return ret; +} +EXPORT_SYMBOL(rfkill_set_hw_state); + +static void __rfkill_set_sw_state(struct rfkill *rfkill, bool blocked) +{ + u32 bit = RFKILL_BLOCK_SW; + + /* if in a ops->set_block right now, use other bit */ + if (rfkill->state & RFKILL_BLOCK_SW_SETCALL) + bit = RFKILL_BLOCK_SW_PREV; + + if (blocked) + rfkill->state |= bit; + else + rfkill->state &= ~bit; +} + +bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked) +{ + unsigned long flags; + bool prev, hwblock; + + BUG_ON(!rfkill); + + spin_lock_irqsave(&rfkill->lock, flags); + prev = !!(rfkill->state & RFKILL_BLOCK_SW); + __rfkill_set_sw_state(rfkill, blocked); + hwblock = !!(rfkill->state & RFKILL_BLOCK_HW); + blocked = blocked || hwblock; + spin_unlock_irqrestore(&rfkill->lock, flags); + + if (!rfkill->registered) + return blocked; + + if (prev != blocked && !hwblock) + schedule_work(&rfkill->uevent_work); + + rfkill_led_trigger_event(rfkill); + + return blocked; +} +EXPORT_SYMBOL(rfkill_set_sw_state); + +void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw) +{ + unsigned long flags; + bool swprev, hwprev; + + BUG_ON(!rfkill); + + spin_lock_irqsave(&rfkill->lock, flags); + + /* + * No need to care about prev/setblock ... this is for uevent only + * and that will get triggered by rfkill_set_block anyway. + */ + swprev = !!(rfkill->state & RFKILL_BLOCK_SW); + hwprev = !!(rfkill->state & RFKILL_BLOCK_HW); + __rfkill_set_sw_state(rfkill, sw); + + spin_unlock_irqrestore(&rfkill->lock, flags); + + if (!rfkill->registered) + return; + + if (swprev != sw || hwprev != hw) + schedule_work(&rfkill->uevent_work); + + rfkill_led_trigger_event(rfkill); +} +EXPORT_SYMBOL(rfkill_set_states); + +static ssize_t rfkill_name_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct rfkill *rfkill = to_rfkill(dev); + + return sprintf(buf, "%s\n", rfkill->name); +} + +static const char *rfkill_get_type_str(enum rfkill_type type) +{ + switch (type) { + case RFKILL_TYPE_WLAN: + return "wlan"; + case RFKILL_TYPE_BLUETOOTH: + return "bluetooth"; + case RFKILL_TYPE_UWB: + return "ultrawideband"; + case RFKILL_TYPE_WIMAX: + return "wimax"; + case RFKILL_TYPE_WWAN: + return "wwan"; + default: + BUG(); + } + + BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_WWAN + 1); +} + +static ssize_t rfkill_type_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct rfkill *rfkill = to_rfkill(dev); + + return sprintf(buf, "%s\n", rfkill_get_type_str(rfkill->type)); +} + +static u8 user_state_from_blocked(unsigned long state) +{ + if (state & RFKILL_BLOCK_HW) + return RFKILL_USER_STATE_HARD_BLOCKED; + if (state & RFKILL_BLOCK_SW) + return RFKILL_USER_STATE_SOFT_BLOCKED; + + return RFKILL_USER_STATE_UNBLOCKED; +} + +static ssize_t rfkill_state_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct rfkill *rfkill = to_rfkill(dev); + unsigned long flags; + u32 state; + + spin_lock_irqsave(&rfkill->lock, flags); + state = rfkill->state; + spin_unlock_irqrestore(&rfkill->lock, flags); + + return sprintf(buf, "%d\n", user_state_from_blocked(state)); +} + +static ssize_t rfkill_state_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + /* + * The intention was that userspace can only take control over + * a given device when/if rfkill-input doesn't control it due + * to user_claim. Since user_claim is currently unsupported, + * we never support changing the state from userspace -- this + * can be implemented again later. + */ + + return -EPERM; +} + +static ssize_t rfkill_claim_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%d\n", 0); +} + +static ssize_t rfkill_claim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return -EOPNOTSUPP; +} + +static struct device_attribute rfkill_dev_attrs[] = { + __ATTR(name, S_IRUGO, rfkill_name_show, NULL), + __ATTR(type, S_IRUGO, rfkill_type_show, NULL), + __ATTR(state, S_IRUGO|S_IWUSR, rfkill_state_show, rfkill_state_store), + __ATTR(claim, S_IRUGO|S_IWUSR, rfkill_claim_show, rfkill_claim_store), + __ATTR_NULL +}; + +static void rfkill_release(struct device *dev) +{ + struct rfkill *rfkill = to_rfkill(dev); + + kfree(rfkill); +} + +static int rfkill_dev_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct rfkill *rfkill = to_rfkill(dev); + unsigned long flags; + u32 state; + int error; + + error = add_uevent_var(env, "RFKILL_NAME=%s", rfkill->name); + if (error) + return error; + error = add_uevent_var(env, "RFKILL_TYPE=%s", + rfkill_get_type_str(rfkill->type)); + if (error) + return error; + spin_lock_irqsave(&rfkill->lock, flags); + state = rfkill->state; + spin_unlock_irqrestore(&rfkill->lock, flags); + error = add_uevent_var(env, "RFKILL_STATE=%d", + user_state_from_blocked(state)); + return error; +} + +void rfkill_pause_polling(struct rfkill *rfkill) +{ + BUG_ON(!rfkill); + + if (!rfkill->ops->poll) + return; + + cancel_delayed_work_sync(&rfkill->poll_work); +} +EXPORT_SYMBOL(rfkill_pause_polling); + +void rfkill_resume_polling(struct rfkill *rfkill) +{ + BUG_ON(!rfkill); + + if (!rfkill->ops->poll) + return; + + schedule_work(&rfkill->poll_work.work); +} +EXPORT_SYMBOL(rfkill_resume_polling); + +static int rfkill_suspend(struct device *dev, pm_message_t state) +{ + struct rfkill *rfkill = to_rfkill(dev); + + rfkill_pause_polling(rfkill); + + rfkill->suspended = true; + + return 0; +} + +static int rfkill_resume(struct device *dev) +{ + struct rfkill *rfkill = to_rfkill(dev); + bool cur; + + mutex_lock(&rfkill_global_mutex); + cur = rfkill_global_states[rfkill->type].cur; + rfkill_set_block(rfkill, cur); + mutex_unlock(&rfkill_global_mutex); + + rfkill->suspended = false; + + schedule_work(&rfkill->uevent_work); + + rfkill_resume_polling(rfkill); + + return 0; +} + +static struct class rfkill_class = { + .name = "rfkill", + .dev_release = rfkill_release, + .dev_attrs = rfkill_dev_attrs, + .dev_uevent = rfkill_dev_uevent, + .suspend = rfkill_suspend, + .resume = rfkill_resume, +}; + + +struct rfkill * __must_check rfkill_alloc(const char *name, + struct device *parent, + const enum rfkill_type type, + const struct rfkill_ops *ops, + void *ops_data) +{ + struct rfkill *rfkill; + struct device *dev; + + if (WARN_ON(!ops)) + return NULL; + + if (WARN_ON(!ops->set_block)) + return NULL; + + if (WARN_ON(!name)) + return NULL; + + if (WARN_ON(type >= NUM_RFKILL_TYPES)) + return NULL; + + rfkill = kzalloc(sizeof(*rfkill), GFP_KERNEL); + if (!rfkill) + return NULL; + + spin_lock_init(&rfkill->lock); + INIT_LIST_HEAD(&rfkill->node); + rfkill->type = type; + rfkill->name = name; + rfkill->ops = ops; + rfkill->data = ops_data; + + dev = &rfkill->dev; + dev->class = &rfkill_class; + dev->parent = parent; + device_initialize(dev); + + return rfkill; +} +EXPORT_SYMBOL(rfkill_alloc); + +static void rfkill_poll(struct work_struct *work) +{ + struct rfkill *rfkill; + + rfkill = container_of(work, struct rfkill, poll_work.work); + + /* + * Poll hardware state -- driver will use one of the + * rfkill_set{,_hw,_sw}_state functions and use its + * return value to update the current status. + */ + rfkill->ops->poll(rfkill, rfkill->data); + + schedule_delayed_work(&rfkill->poll_work, + round_jiffies_relative(POLL_INTERVAL)); +} + +static void rfkill_uevent_work(struct work_struct *work) +{ + struct rfkill *rfkill; + + rfkill = container_of(work, struct rfkill, uevent_work); + + rfkill_uevent(rfkill); +} + +static void rfkill_sync_work(struct work_struct *work) +{ + struct rfkill *rfkill; + bool cur; + + rfkill = container_of(work, struct rfkill, sync_work); + + mutex_lock(&rfkill_global_mutex); + cur = rfkill_global_states[rfkill->type].cur; + rfkill_set_block(rfkill, cur); + mutex_unlock(&rfkill_global_mutex); +} + +int __must_check rfkill_register(struct rfkill *rfkill) +{ + static unsigned long rfkill_no; + struct device *dev = &rfkill->dev; + int error; + + BUG_ON(!rfkill); + + mutex_lock(&rfkill_global_mutex); + + if (rfkill->registered) { + error = -EALREADY; + goto unlock; + } + + dev_set_name(dev, "rfkill%lu", rfkill_no); + rfkill_no++; + + if (!(rfkill_states_default_locked & BIT(rfkill->type))) { + /* first of its kind */ + BUILD_BUG_ON(NUM_RFKILL_TYPES > + sizeof(rfkill_states_default_locked) * 8); + rfkill_states_default_locked |= BIT(rfkill->type); + rfkill_global_states[rfkill->type].cur = + rfkill_global_states[rfkill->type].def; + } + + list_add_tail(&rfkill->node, &rfkill_list); + + error = device_add(dev); + if (error) + goto remove; + + error = rfkill_led_trigger_register(rfkill); + if (error) + goto devdel; + + rfkill->registered = true; + + if (rfkill->ops->poll) { + INIT_DELAYED_WORK(&rfkill->poll_work, rfkill_poll); + schedule_delayed_work(&rfkill->poll_work, + round_jiffies_relative(POLL_INTERVAL)); + } + + INIT_WORK(&rfkill->uevent_work, rfkill_uevent_work); + + INIT_WORK(&rfkill->sync_work, rfkill_sync_work); + schedule_work(&rfkill->sync_work); + + mutex_unlock(&rfkill_global_mutex); + return 0; + + devdel: + device_del(&rfkill->dev); + remove: + list_del_init(&rfkill->node); + unlock: + mutex_unlock(&rfkill_global_mutex); + return error; +} +EXPORT_SYMBOL(rfkill_register); + +void rfkill_unregister(struct rfkill *rfkill) +{ + BUG_ON(!rfkill); + + if (rfkill->ops->poll) + cancel_delayed_work_sync(&rfkill->poll_work); + + cancel_work_sync(&rfkill->uevent_work); + cancel_work_sync(&rfkill->sync_work); + + rfkill->registered = false; + + device_del(&rfkill->dev); + + mutex_lock(&rfkill_global_mutex); + list_del_init(&rfkill->node); + mutex_unlock(&rfkill_global_mutex); + + rfkill_led_trigger_unregister(rfkill); +} +EXPORT_SYMBOL(rfkill_unregister); + +void rfkill_destroy(struct rfkill *rfkill) +{ + if (rfkill) + put_device(&rfkill->dev); +} +EXPORT_SYMBOL(rfkill_destroy); + + +static int __init rfkill_init(void) +{ + int error; + int i; + + for (i = 0; i < NUM_RFKILL_TYPES; i++) + rfkill_global_states[i].def = !rfkill_default_state; + + error = class_register(&rfkill_class); + if (error) + goto out; + +#ifdef CONFIG_RFKILL_INPUT + error = rfkill_handler_init(); + if (error) + class_unregister(&rfkill_class); +#endif + + out: + return error; +} +subsys_initcall(rfkill_init); + +static void __exit rfkill_exit(void) +{ +#ifdef CONFIG_RFKILL_INPUT + rfkill_handler_exit(); +#endif + class_unregister(&rfkill_class); +} +module_exit(rfkill_exit); diff --git a/net/rfkill/input.c b/net/rfkill/input.c new file mode 100644 index 0000000..a7295ad --- /dev/null +++ b/net/rfkill/input.c @@ -0,0 +1,342 @@ +/* + * Input layer to RF Kill interface connector + * + * Copyright (c) 2007 Dmitry Torokhov + * Copyright 2009 Johannes Berg + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * If you ever run into a situation in which you have a SW_ type rfkill + * input device, then you can revive code that was removed in the patch + * "rfkill-input: remove unused code". + */ + +#include +#include +#include +#include +#include +#include + +#include "rfkill.h" + +enum rfkill_input_master_mode { + RFKILL_INPUT_MASTER_UNLOCK = 0, + RFKILL_INPUT_MASTER_RESTORE = 1, + RFKILL_INPUT_MASTER_UNBLOCKALL = 2, + NUM_RFKILL_INPUT_MASTER_MODES +}; + +/* Delay (in ms) between consecutive switch ops */ +#define RFKILL_OPS_DELAY 200 + +static enum rfkill_input_master_mode rfkill_master_switch_mode = + RFKILL_INPUT_MASTER_UNBLOCKALL; +module_param_named(master_switch_mode, rfkill_master_switch_mode, uint, 0); +MODULE_PARM_DESC(master_switch_mode, + "SW_RFKILL_ALL ON should: 0=do nothing (only unlock); 1=restore; 2=unblock all"); + +static spinlock_t rfkill_op_lock; +static bool rfkill_op_pending; +static unsigned long rfkill_sw_pending[BITS_TO_LONGS(NUM_RFKILL_TYPES)]; +static unsigned long rfkill_sw_state[BITS_TO_LONGS(NUM_RFKILL_TYPES)]; + +enum rfkill_sched_op { + RFKILL_GLOBAL_OP_EPO = 0, + RFKILL_GLOBAL_OP_RESTORE, + RFKILL_GLOBAL_OP_UNLOCK, + RFKILL_GLOBAL_OP_UNBLOCK, +}; + +static enum rfkill_sched_op rfkill_master_switch_op; +static enum rfkill_sched_op rfkill_op; + +static void __rfkill_handle_global_op(enum rfkill_sched_op op) +{ + unsigned int i; + + switch (op) { + case RFKILL_GLOBAL_OP_EPO: + rfkill_epo(); + break; + case RFKILL_GLOBAL_OP_RESTORE: + rfkill_restore_states(); + break; + case RFKILL_GLOBAL_OP_UNLOCK: + rfkill_remove_epo_lock(); + break; + case RFKILL_GLOBAL_OP_UNBLOCK: + rfkill_remove_epo_lock(); + for (i = 0; i < NUM_RFKILL_TYPES; i++) + rfkill_switch_all(i, false); + break; + default: + /* memory corruption or bug, fail safely */ + rfkill_epo(); + WARN(1, "Unknown requested operation %d! " + "rfkill Emergency Power Off activated\n", + op); + } +} + +static void __rfkill_handle_normal_op(const enum rfkill_type type, + const bool complement) +{ + bool blocked; + + blocked = rfkill_get_global_sw_state(type); + if (complement) + blocked = !blocked; + + rfkill_switch_all(type, blocked); +} + +static void rfkill_op_handler(struct work_struct *work) +{ + unsigned int i; + bool c; + + spin_lock_irq(&rfkill_op_lock); + do { + if (rfkill_op_pending) { + enum rfkill_sched_op op = rfkill_op; + rfkill_op_pending = false; + memset(rfkill_sw_pending, 0, + sizeof(rfkill_sw_pending)); + spin_unlock_irq(&rfkill_op_lock); + + __rfkill_handle_global_op(op); + + spin_lock_irq(&rfkill_op_lock); + + /* + * handle global ops first -- during unlocked period + * we might have gotten a new global op. + */ + if (rfkill_op_pending) + continue; + } + + if (rfkill_is_epo_lock_active()) + continue; + + for (i = 0; i < NUM_RFKILL_TYPES; i++) { + if (__test_and_clear_bit(i, rfkill_sw_pending)) { + c = __test_and_clear_bit(i, rfkill_sw_state); + spin_unlock_irq(&rfkill_op_lock); + + __rfkill_handle_normal_op(i, c); + + spin_lock_irq(&rfkill_op_lock); + } + } + } while (rfkill_op_pending); + spin_unlock_irq(&rfkill_op_lock); +} + +static DECLARE_DELAYED_WORK(rfkill_op_work, rfkill_op_handler); +static unsigned long rfkill_last_scheduled; + +static unsigned long rfkill_ratelimit(const unsigned long last) +{ + const unsigned long delay = msecs_to_jiffies(RFKILL_OPS_DELAY); + return (time_after(jiffies, last + delay)) ? 0 : delay; +} + +static void rfkill_schedule_ratelimited(void) +{ + if (delayed_work_pending(&rfkill_op_work)) + return; + schedule_delayed_work(&rfkill_op_work, + rfkill_ratelimit(rfkill_last_scheduled)); + rfkill_last_scheduled = jiffies; +} + +static void rfkill_schedule_global_op(enum rfkill_sched_op op) +{ + unsigned long flags; + + spin_lock_irqsave(&rfkill_op_lock, flags); + rfkill_op = op; + rfkill_op_pending = true; + if (op == RFKILL_GLOBAL_OP_EPO && !rfkill_is_epo_lock_active()) { + /* bypass the limiter for EPO */ + cancel_delayed_work(&rfkill_op_work); + schedule_delayed_work(&rfkill_op_work, 0); + rfkill_last_scheduled = jiffies; + } else + rfkill_schedule_ratelimited(); + spin_unlock_irqrestore(&rfkill_op_lock, flags); +} + +static void rfkill_schedule_toggle(enum rfkill_type type) +{ + unsigned long flags; + + if (rfkill_is_epo_lock_active()) + return; + + spin_lock_irqsave(&rfkill_op_lock, flags); + if (!rfkill_op_pending) { + __set_bit(type, rfkill_sw_pending); + __change_bit(type, rfkill_sw_state); + rfkill_schedule_ratelimited(); + } + spin_unlock_irqrestore(&rfkill_op_lock, flags); +} + +static void rfkill_schedule_evsw_rfkillall(int state) +{ + if (state) + rfkill_schedule_global_op(rfkill_master_switch_op); + else + rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO); +} + +static void rfkill_event(struct input_handle *handle, unsigned int type, + unsigned int code, int data) +{ + if (type == EV_KEY && data == 1) { + switch (code) { + case KEY_WLAN: + rfkill_schedule_toggle(RFKILL_TYPE_WLAN); + break; + case KEY_BLUETOOTH: + rfkill_schedule_toggle(RFKILL_TYPE_BLUETOOTH); + break; + case KEY_UWB: + rfkill_schedule_toggle(RFKILL_TYPE_UWB); + break; + case KEY_WIMAX: + rfkill_schedule_toggle(RFKILL_TYPE_WIMAX); + break; + } + } else if (type == EV_SW && code == SW_RFKILL_ALL) + rfkill_schedule_evsw_rfkillall(data); +} + +static int rfkill_connect(struct input_handler *handler, struct input_dev *dev, + const struct input_device_id *id) +{ + struct input_handle *handle; + int error; + + handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL); + if (!handle) + return -ENOMEM; + + handle->dev = dev; + handle->handler = handler; + handle->name = "rfkill"; + + /* causes rfkill_start() to be called */ + error = input_register_handle(handle); + if (error) + goto err_free_handle; + + error = input_open_device(handle); + if (error) + goto err_unregister_handle; + + return 0; + + err_unregister_handle: + input_unregister_handle(handle); + err_free_handle: + kfree(handle); + return error; +} + +static void rfkill_start(struct input_handle *handle) +{ + /* + * Take event_lock to guard against configuration changes, we + * should be able to deal with concurrency with rfkill_event() + * just fine (which event_lock will also avoid). + */ + spin_lock_irq(&handle->dev->event_lock); + + if (test_bit(EV_SW, handle->dev->evbit) && + test_bit(SW_RFKILL_ALL, handle->dev->swbit)) + rfkill_schedule_evsw_rfkillall(test_bit(SW_RFKILL_ALL, + handle->dev->sw)); + + spin_unlock_irq(&handle->dev->event_lock); +} + +static void rfkill_disconnect(struct input_handle *handle) +{ + input_close_device(handle); + input_unregister_handle(handle); + kfree(handle); +} + +static const struct input_device_id rfkill_ids[] = { + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(KEY_WLAN)] = BIT_MASK(KEY_WLAN) }, + }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(KEY_BLUETOOTH)] = BIT_MASK(KEY_BLUETOOTH) }, + }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(KEY_UWB)] = BIT_MASK(KEY_UWB) }, + }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(KEY_WIMAX)] = BIT_MASK(KEY_WIMAX) }, + }, + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT, + .evbit = { BIT(EV_SW) }, + .swbit = { [BIT_WORD(SW_RFKILL_ALL)] = BIT_MASK(SW_RFKILL_ALL) }, + }, + { } +}; + +static struct input_handler rfkill_handler = { + .name = "rfkill", + .event = rfkill_event, + .connect = rfkill_connect, + .start = rfkill_start, + .disconnect = rfkill_disconnect, + .id_table = rfkill_ids, +}; + +int __init rfkill_handler_init(void) +{ + switch (rfkill_master_switch_mode) { + case RFKILL_INPUT_MASTER_UNBLOCKALL: + rfkill_master_switch_op = RFKILL_GLOBAL_OP_UNBLOCK; + break; + case RFKILL_INPUT_MASTER_RESTORE: + rfkill_master_switch_op = RFKILL_GLOBAL_OP_RESTORE; + break; + case RFKILL_INPUT_MASTER_UNLOCK: + rfkill_master_switch_op = RFKILL_GLOBAL_OP_UNLOCK; + break; + default: + return -EINVAL; + } + + spin_lock_init(&rfkill_op_lock); + + /* Avoid delay at first schedule */ + rfkill_last_scheduled = + jiffies - msecs_to_jiffies(RFKILL_OPS_DELAY) - 1; + return input_register_handler(&rfkill_handler); +} + +void __exit rfkill_handler_exit(void) +{ + input_unregister_handler(&rfkill_handler); + cancel_delayed_work_sync(&rfkill_op_work); +} diff --git a/net/rfkill/rfkill-input.c b/net/rfkill/rfkill-input.c deleted file mode 100644 index 60a34f3..0000000 --- a/net/rfkill/rfkill-input.c +++ /dev/null @@ -1,390 +0,0 @@ -/* - * Input layer to RF Kill interface connector - * - * Copyright (c) 2007 Dmitry Torokhov - */ - -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "rfkill-input.h" - -MODULE_AUTHOR("Dmitry Torokhov "); -MODULE_DESCRIPTION("Input layer to RF switch connector"); -MODULE_LICENSE("GPL"); - -enum rfkill_input_master_mode { - RFKILL_INPUT_MASTER_DONOTHING = 0, - RFKILL_INPUT_MASTER_RESTORE = 1, - RFKILL_INPUT_MASTER_UNBLOCKALL = 2, - RFKILL_INPUT_MASTER_MAX, /* marker */ -}; - -/* Delay (in ms) between consecutive switch ops */ -#define RFKILL_OPS_DELAY 200 - -static enum rfkill_input_master_mode rfkill_master_switch_mode = - RFKILL_INPUT_MASTER_UNBLOCKALL; -module_param_named(master_switch_mode, rfkill_master_switch_mode, uint, 0); -MODULE_PARM_DESC(master_switch_mode, - "SW_RFKILL_ALL ON should: 0=do nothing; 1=restore; 2=unblock all"); - -enum rfkill_global_sched_op { - RFKILL_GLOBAL_OP_EPO = 0, - RFKILL_GLOBAL_OP_RESTORE, - RFKILL_GLOBAL_OP_UNLOCK, - RFKILL_GLOBAL_OP_UNBLOCK, -}; - -struct rfkill_task { - struct delayed_work dwork; - - /* ensures that task is serialized */ - struct mutex mutex; - - /* protects everything below */ - spinlock_t lock; - - /* pending regular switch operations (1=pending) */ - unsigned long sw_pending[BITS_TO_LONGS(RFKILL_TYPE_MAX)]; - - /* should the state be complemented (1=yes) */ - unsigned long sw_togglestate[BITS_TO_LONGS(RFKILL_TYPE_MAX)]; - - bool global_op_pending; - enum rfkill_global_sched_op op; - - /* last time it was scheduled */ - unsigned long last_scheduled; -}; - -static void __rfkill_handle_global_op(enum rfkill_global_sched_op op) -{ - unsigned int i; - - switch (op) { - case RFKILL_GLOBAL_OP_EPO: - rfkill_epo(); - break; - case RFKILL_GLOBAL_OP_RESTORE: - rfkill_restore_states(); - break; - case RFKILL_GLOBAL_OP_UNLOCK: - rfkill_remove_epo_lock(); - break; - case RFKILL_GLOBAL_OP_UNBLOCK: - rfkill_remove_epo_lock(); - for (i = 0; i < RFKILL_TYPE_MAX; i++) - rfkill_switch_all(i, RFKILL_STATE_UNBLOCKED); - break; - default: - /* memory corruption or bug, fail safely */ - rfkill_epo(); - WARN(1, "Unknown requested operation %d! " - "rfkill Emergency Power Off activated\n", - op); - } -} - -static void __rfkill_handle_normal_op(const enum rfkill_type type, - const bool c) -{ - enum rfkill_state state; - - state = rfkill_get_global_state(type); - if (c) - state = rfkill_state_complement(state); - - rfkill_switch_all(type, state); -} - -static void rfkill_task_handler(struct work_struct *work) -{ - struct rfkill_task *task = container_of(work, - struct rfkill_task, dwork.work); - bool doit = true; - - mutex_lock(&task->mutex); - - spin_lock_irq(&task->lock); - while (doit) { - if (task->global_op_pending) { - enum rfkill_global_sched_op op = task->op; - task->global_op_pending = false; - memset(task->sw_pending, 0, sizeof(task->sw_pending)); - spin_unlock_irq(&task->lock); - - __rfkill_handle_global_op(op); - - /* make sure we do at least one pass with - * !task->global_op_pending */ - spin_lock_irq(&task->lock); - continue; - } else if (!rfkill_is_epo_lock_active()) { - unsigned int i = 0; - - while (!task->global_op_pending && - i < RFKILL_TYPE_MAX) { - if (test_and_clear_bit(i, task->sw_pending)) { - bool c; - c = test_and_clear_bit(i, - task->sw_togglestate); - spin_unlock_irq(&task->lock); - - __rfkill_handle_normal_op(i, c); - - spin_lock_irq(&task->lock); - } - i++; - } - } - doit = task->global_op_pending; - } - spin_unlock_irq(&task->lock); - - mutex_unlock(&task->mutex); -} - -static struct rfkill_task rfkill_task = { - .dwork = __DELAYED_WORK_INITIALIZER(rfkill_task.dwork, - rfkill_task_handler), - .mutex = __MUTEX_INITIALIZER(rfkill_task.mutex), - .lock = __SPIN_LOCK_UNLOCKED(rfkill_task.lock), -}; - -static unsigned long rfkill_ratelimit(const unsigned long last) -{ - const unsigned long delay = msecs_to_jiffies(RFKILL_OPS_DELAY); - return (time_after(jiffies, last + delay)) ? 0 : delay; -} - -static void rfkill_schedule_ratelimited(void) -{ - if (!delayed_work_pending(&rfkill_task.dwork)) { - schedule_delayed_work(&rfkill_task.dwork, - rfkill_ratelimit(rfkill_task.last_scheduled)); - rfkill_task.last_scheduled = jiffies; - } -} - -static void rfkill_schedule_global_op(enum rfkill_global_sched_op op) -{ - unsigned long flags; - - spin_lock_irqsave(&rfkill_task.lock, flags); - rfkill_task.op = op; - rfkill_task.global_op_pending = true; - if (op == RFKILL_GLOBAL_OP_EPO && !rfkill_is_epo_lock_active()) { - /* bypass the limiter for EPO */ - cancel_delayed_work(&rfkill_task.dwork); - schedule_delayed_work(&rfkill_task.dwork, 0); - rfkill_task.last_scheduled = jiffies; - } else - rfkill_schedule_ratelimited(); - spin_unlock_irqrestore(&rfkill_task.lock, flags); -} - -static void rfkill_schedule_toggle(enum rfkill_type type) -{ - unsigned long flags; - - if (rfkill_is_epo_lock_active()) - return; - - spin_lock_irqsave(&rfkill_task.lock, flags); - if (!rfkill_task.global_op_pending) { - set_bit(type, rfkill_task.sw_pending); - change_bit(type, rfkill_task.sw_togglestate); - rfkill_schedule_ratelimited(); - } - spin_unlock_irqrestore(&rfkill_task.lock, flags); -} - -static void rfkill_schedule_evsw_rfkillall(int state) -{ - if (state) { - switch (rfkill_master_switch_mode) { - case RFKILL_INPUT_MASTER_UNBLOCKALL: - rfkill_schedule_global_op(RFKILL_GLOBAL_OP_UNBLOCK); - break; - case RFKILL_INPUT_MASTER_RESTORE: - rfkill_schedule_global_op(RFKILL_GLOBAL_OP_RESTORE); - break; - case RFKILL_INPUT_MASTER_DONOTHING: - rfkill_schedule_global_op(RFKILL_GLOBAL_OP_UNLOCK); - break; - default: - /* memory corruption or driver bug! fail safely */ - rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO); - WARN(1, "Unknown rfkill_master_switch_mode (%d), " - "driver bug or memory corruption detected!\n", - rfkill_master_switch_mode); - break; - } - } else - rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO); -} - -static void rfkill_event(struct input_handle *handle, unsigned int type, - unsigned int code, int data) -{ - if (type == EV_KEY && data == 1) { - enum rfkill_type t; - - switch (code) { - case KEY_WLAN: - t = RFKILL_TYPE_WLAN; - break; - case KEY_BLUETOOTH: - t = RFKILL_TYPE_BLUETOOTH; - break; - case KEY_UWB: - t = RFKILL_TYPE_UWB; - break; - case KEY_WIMAX: - t = RFKILL_TYPE_WIMAX; - break; - default: - return; - } - rfkill_schedule_toggle(t); - return; - } else if (type == EV_SW) { - switch (code) { - case SW_RFKILL_ALL: - rfkill_schedule_evsw_rfkillall(data); - return; - default: - return; - } - } -} - -static int rfkill_connect(struct input_handler *handler, struct input_dev *dev, - const struct input_device_id *id) -{ - struct input_handle *handle; - int error; - - handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL); - if (!handle) - return -ENOMEM; - - handle->dev = dev; - handle->handler = handler; - handle->name = "rfkill"; - - /* causes rfkill_start() to be called */ - error = input_register_handle(handle); - if (error) - goto err_free_handle; - - error = input_open_device(handle); - if (error) - goto err_unregister_handle; - - return 0; - - err_unregister_handle: - input_unregister_handle(handle); - err_free_handle: - kfree(handle); - return error; -} - -static void rfkill_start(struct input_handle *handle) -{ - /* Take event_lock to guard against configuration changes, we - * should be able to deal with concurrency with rfkill_event() - * just fine (which event_lock will also avoid). */ - spin_lock_irq(&handle->dev->event_lock); - - if (test_bit(EV_SW, handle->dev->evbit)) { - if (test_bit(SW_RFKILL_ALL, handle->dev->swbit)) - rfkill_schedule_evsw_rfkillall(test_bit(SW_RFKILL_ALL, - handle->dev->sw)); - /* add resync for further EV_SW events here */ - } - - spin_unlock_irq(&handle->dev->event_lock); -} - -static void rfkill_disconnect(struct input_handle *handle) -{ - input_close_device(handle); - input_unregister_handle(handle); - kfree(handle); -} - -static const struct input_device_id rfkill_ids[] = { - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, - .evbit = { BIT_MASK(EV_KEY) }, - .keybit = { [BIT_WORD(KEY_WLAN)] = BIT_MASK(KEY_WLAN) }, - }, - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, - .evbit = { BIT_MASK(EV_KEY) }, - .keybit = { [BIT_WORD(KEY_BLUETOOTH)] = BIT_MASK(KEY_BLUETOOTH) }, - }, - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, - .evbit = { BIT_MASK(EV_KEY) }, - .keybit = { [BIT_WORD(KEY_UWB)] = BIT_MASK(KEY_UWB) }, - }, - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, - .evbit = { BIT_MASK(EV_KEY) }, - .keybit = { [BIT_WORD(KEY_WIMAX)] = BIT_MASK(KEY_WIMAX) }, - }, - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT, - .evbit = { BIT(EV_SW) }, - .swbit = { [BIT_WORD(SW_RFKILL_ALL)] = BIT_MASK(SW_RFKILL_ALL) }, - }, - { } -}; - -static struct input_handler rfkill_handler = { - .event = rfkill_event, - .connect = rfkill_connect, - .disconnect = rfkill_disconnect, - .start = rfkill_start, - .name = "rfkill", - .id_table = rfkill_ids, -}; - -static int __init rfkill_handler_init(void) -{ - if (rfkill_master_switch_mode >= RFKILL_INPUT_MASTER_MAX) - return -EINVAL; - - /* - * The penalty to not doing this is a possible RFKILL_OPS_DELAY delay - * at the first use. Acceptable, but if we can avoid it, why not? - */ - rfkill_task.last_scheduled = - jiffies - msecs_to_jiffies(RFKILL_OPS_DELAY) - 1; - return input_register_handler(&rfkill_handler); -} - -static void __exit rfkill_handler_exit(void) -{ - input_unregister_handler(&rfkill_handler); - cancel_delayed_work_sync(&rfkill_task.dwork); - rfkill_remove_epo_lock(); -} - -module_init(rfkill_handler_init); -module_exit(rfkill_handler_exit); diff --git a/net/rfkill/rfkill-input.h b/net/rfkill/rfkill-input.h deleted file mode 100644 index fe8df6b..0000000 --- a/net/rfkill/rfkill-input.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 2007 Ivo van Doorn - */ - -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __RFKILL_INPUT_H -#define __RFKILL_INPUT_H - -void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state); -void rfkill_epo(void); -void rfkill_restore_states(void); -void rfkill_remove_epo_lock(void); -bool rfkill_is_epo_lock_active(void); -enum rfkill_state rfkill_get_global_state(const enum rfkill_type type); - -#endif /* __RFKILL_INPUT_H */ diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c deleted file mode 100644 index 4f5a831..0000000 --- a/net/rfkill/rfkill.c +++ /dev/null @@ -1,855 +0,0 @@ -/* - * Copyright (C) 2006 - 2007 Ivo van Doorn - * Copyright (C) 2007 Dmitry Torokhov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* Get declaration of rfkill_switch_all() to shut up sparse. */ -#include "rfkill-input.h" - - -MODULE_AUTHOR("Ivo van Doorn "); -MODULE_VERSION("1.0"); -MODULE_DESCRIPTION("RF switch support"); -MODULE_LICENSE("GPL"); - -static LIST_HEAD(rfkill_list); /* list of registered rf switches */ -static DEFINE_MUTEX(rfkill_global_mutex); - -static unsigned int rfkill_default_state = RFKILL_STATE_UNBLOCKED; -module_param_named(default_state, rfkill_default_state, uint, 0444); -MODULE_PARM_DESC(default_state, - "Default initial state for all radio types, 0 = radio off"); - -struct rfkill_gsw_state { - enum rfkill_state current_state; - enum rfkill_state default_state; -}; - -static struct rfkill_gsw_state rfkill_global_states[RFKILL_TYPE_MAX]; -static unsigned long rfkill_states_lockdflt[BITS_TO_LONGS(RFKILL_TYPE_MAX)]; -static bool rfkill_epo_lock_active; - - -#ifdef CONFIG_RFKILL_LEDS -static void rfkill_led_trigger(struct rfkill *rfkill, - enum rfkill_state state) -{ - struct led_trigger *led = &rfkill->led_trigger; - - if (!led->name) - return; - if (state != RFKILL_STATE_UNBLOCKED) - led_trigger_event(led, LED_OFF); - else - led_trigger_event(led, LED_FULL); -} - -static void rfkill_led_trigger_activate(struct led_classdev *led) -{ - struct rfkill *rfkill = container_of(led->trigger, - struct rfkill, led_trigger); - - rfkill_led_trigger(rfkill, rfkill->state); -} -#else -static inline void rfkill_led_trigger(struct rfkill *rfkill, - enum rfkill_state state) -{ -} -#endif /* CONFIG_RFKILL_LEDS */ - -static void rfkill_uevent(struct rfkill *rfkill) -{ - kobject_uevent(&rfkill->dev.kobj, KOBJ_CHANGE); -} - -static void update_rfkill_state(struct rfkill *rfkill) -{ - enum rfkill_state newstate, oldstate; - - if (rfkill->get_state) { - mutex_lock(&rfkill->mutex); - if (!rfkill->get_state(rfkill->data, &newstate)) { - oldstate = rfkill->state; - rfkill->state = newstate; - if (oldstate != newstate) - rfkill_uevent(rfkill); - } - mutex_unlock(&rfkill->mutex); - } - rfkill_led_trigger(rfkill, rfkill->state); -} - -/** - * rfkill_toggle_radio - wrapper for toggle_radio hook - * @rfkill: the rfkill struct to use - * @force: calls toggle_radio even if cache says it is not needed, - * and also makes sure notifications of the state will be - * sent even if it didn't change - * @state: the new state to call toggle_radio() with - * - * Calls rfkill->toggle_radio, enforcing the API for toggle_radio - * calls and handling all the red tape such as issuing notifications - * if the call is successful. - * - * Suspended devices are not touched at all, and -EAGAIN is returned. - * - * Note that the @force parameter cannot override a (possibly cached) - * state of RFKILL_STATE_HARD_BLOCKED. Any device making use of - * RFKILL_STATE_HARD_BLOCKED implements either get_state() or - * rfkill_force_state(), so the cache either is bypassed or valid. - * - * Note that we do call toggle_radio for RFKILL_STATE_SOFT_BLOCKED - * even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to - * give the driver a hint that it should double-BLOCK the transmitter. - * - * Caller must have acquired rfkill->mutex. - */ -static int rfkill_toggle_radio(struct rfkill *rfkill, - enum rfkill_state state, - int force) -{ - int retval = 0; - enum rfkill_state oldstate, newstate; - - if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP)) - return -EBUSY; - - oldstate = rfkill->state; - - if (rfkill->get_state && !force && - !rfkill->get_state(rfkill->data, &newstate)) { - rfkill->state = newstate; - } - - switch (state) { - case RFKILL_STATE_HARD_BLOCKED: - /* typically happens when refreshing hardware state, - * such as on resume */ - state = RFKILL_STATE_SOFT_BLOCKED; - break; - case RFKILL_STATE_UNBLOCKED: - /* force can't override this, only rfkill_force_state() can */ - if (rfkill->state == RFKILL_STATE_HARD_BLOCKED) - return -EPERM; - break; - case RFKILL_STATE_SOFT_BLOCKED: - /* nothing to do, we want to give drivers the hint to double - * BLOCK even a transmitter that is already in state - * RFKILL_STATE_HARD_BLOCKED */ - break; - default: - WARN(1, KERN_WARNING - "rfkill: illegal state %d passed as parameter " - "to rfkill_toggle_radio\n", state); - return -EINVAL; - } - - if (force || state != rfkill->state) { - retval = rfkill->toggle_radio(rfkill->data, state); - /* never allow a HARD->SOFT downgrade! */ - if (!retval && rfkill->state != RFKILL_STATE_HARD_BLOCKED) - rfkill->state = state; - } - - if (force || rfkill->state != oldstate) - rfkill_uevent(rfkill); - - rfkill_led_trigger(rfkill, rfkill->state); - return retval; -} - -/** - * __rfkill_switch_all - Toggle state of all switches of given type - * @type: type of interfaces to be affected - * @state: the new state - * - * This function toggles the state of all switches of given type, - * unless a specific switch is claimed by userspace (in which case, - * that switch is left alone) or suspended. - * - * Caller must have acquired rfkill_global_mutex. - */ -static void __rfkill_switch_all(const enum rfkill_type type, - const enum rfkill_state state) -{ - struct rfkill *rfkill; - - if (WARN((state >= RFKILL_STATE_MAX || type >= RFKILL_TYPE_MAX), - KERN_WARNING - "rfkill: illegal state %d or type %d " - "passed as parameter to __rfkill_switch_all\n", - state, type)) - return; - - rfkill_global_states[type].current_state = state; - list_for_each_entry(rfkill, &rfkill_list, node) { - if (rfkill->type == type) { - mutex_lock(&rfkill->mutex); - rfkill_toggle_radio(rfkill, state, 0); - mutex_unlock(&rfkill->mutex); - rfkill_led_trigger(rfkill, rfkill->state); - } - } -} - -/** - * rfkill_switch_all - Toggle state of all switches of given type - * @type: type of interfaces to be affected - * @state: the new state - * - * Acquires rfkill_global_mutex and calls __rfkill_switch_all(@type, @state). - * Please refer to __rfkill_switch_all() for details. - * - * Does nothing if the EPO lock is active. - */ -void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state) -{ - mutex_lock(&rfkill_global_mutex); - if (!rfkill_epo_lock_active) - __rfkill_switch_all(type, state); - mutex_unlock(&rfkill_global_mutex); -} -EXPORT_SYMBOL(rfkill_switch_all); - -/** - * rfkill_epo - emergency power off all transmitters - * - * This kicks all non-suspended rfkill devices to RFKILL_STATE_SOFT_BLOCKED, - * ignoring everything in its path but rfkill_global_mutex and rfkill->mutex. - * - * The global state before the EPO is saved and can be restored later - * using rfkill_restore_states(). - */ -void rfkill_epo(void) -{ - struct rfkill *rfkill; - int i; - - mutex_lock(&rfkill_global_mutex); - - rfkill_epo_lock_active = true; - list_for_each_entry(rfkill, &rfkill_list, node) { - mutex_lock(&rfkill->mutex); - rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); - mutex_unlock(&rfkill->mutex); - } - for (i = 0; i < RFKILL_TYPE_MAX; i++) { - rfkill_global_states[i].default_state = - rfkill_global_states[i].current_state; - rfkill_global_states[i].current_state = - RFKILL_STATE_SOFT_BLOCKED; - } - mutex_unlock(&rfkill_global_mutex); - rfkill_led_trigger(rfkill, rfkill->state); -} -EXPORT_SYMBOL_GPL(rfkill_epo); - -/** - * rfkill_restore_states - restore global states - * - * Restore (and sync switches to) the global state from the - * states in rfkill_default_states. This can undo the effects of - * a call to rfkill_epo(). - */ -void rfkill_restore_states(void) -{ - int i; - - mutex_lock(&rfkill_global_mutex); - - rfkill_epo_lock_active = false; - for (i = 0; i < RFKILL_TYPE_MAX; i++) - __rfkill_switch_all(i, rfkill_global_states[i].default_state); - mutex_unlock(&rfkill_global_mutex); -} -EXPORT_SYMBOL_GPL(rfkill_restore_states); - -/** - * rfkill_remove_epo_lock - unlock state changes - * - * Used by rfkill-input manually unlock state changes, when - * the EPO switch is deactivated. - */ -void rfkill_remove_epo_lock(void) -{ - mutex_lock(&rfkill_global_mutex); - rfkill_epo_lock_active = false; - mutex_unlock(&rfkill_global_mutex); -} -EXPORT_SYMBOL_GPL(rfkill_remove_epo_lock); - -/** - * rfkill_is_epo_lock_active - returns true EPO is active - * - * Returns 0 (false) if there is NOT an active EPO contidion, - * and 1 (true) if there is an active EPO contition, which - * locks all radios in one of the BLOCKED states. - * - * Can be called in atomic context. - */ -bool rfkill_is_epo_lock_active(void) -{ - return rfkill_epo_lock_active; -} -EXPORT_SYMBOL_GPL(rfkill_is_epo_lock_active); - -/** - * rfkill_get_global_state - returns global state for a type - * @type: the type to get the global state of - * - * Returns the current global state for a given wireless - * device type. - */ -enum rfkill_state rfkill_get_global_state(const enum rfkill_type type) -{ - return rfkill_global_states[type].current_state; -} -EXPORT_SYMBOL_GPL(rfkill_get_global_state); - -/** - * rfkill_force_state - Force the internal rfkill radio state - * @rfkill: pointer to the rfkill class to modify. - * @state: the current radio state the class should be forced to. - * - * This function updates the internal state of the radio cached - * by the rfkill class. It should be used when the driver gets - * a notification by the firmware/hardware of the current *real* - * state of the radio rfkill switch. - * - * Devices which are subject to external changes on their rfkill - * state (such as those caused by a hardware rfkill line) MUST - * have their driver arrange to call rfkill_force_state() as soon - * as possible after such a change. - * - * This function may not be called from an atomic context. - */ -int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state) -{ - enum rfkill_state oldstate; - - BUG_ON(!rfkill); - if (WARN((state >= RFKILL_STATE_MAX), - KERN_WARNING - "rfkill: illegal state %d passed as parameter " - "to rfkill_force_state\n", state)) - return -EINVAL; - - mutex_lock(&rfkill->mutex); - - oldstate = rfkill->state; - rfkill->state = state; - - if (state != oldstate) - rfkill_uevent(rfkill); - - mutex_unlock(&rfkill->mutex); - rfkill_led_trigger(rfkill, rfkill->state); - - return 0; -} -EXPORT_SYMBOL(rfkill_force_state); - -static ssize_t rfkill_name_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct rfkill *rfkill = to_rfkill(dev); - - return sprintf(buf, "%s\n", rfkill->name); -} - -static const char *rfkill_get_type_str(enum rfkill_type type) -{ - switch (type) { - case RFKILL_TYPE_WLAN: - return "wlan"; - case RFKILL_TYPE_BLUETOOTH: - return "bluetooth"; - case RFKILL_TYPE_UWB: - return "ultrawideband"; - case RFKILL_TYPE_WIMAX: - return "wimax"; - case RFKILL_TYPE_WWAN: - return "wwan"; - default: - BUG(); - } -} - -static ssize_t rfkill_type_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct rfkill *rfkill = to_rfkill(dev); - - return sprintf(buf, "%s\n", rfkill_get_type_str(rfkill->type)); -} - -static ssize_t rfkill_state_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct rfkill *rfkill = to_rfkill(dev); - - update_rfkill_state(rfkill); - return sprintf(buf, "%d\n", rfkill->state); -} - -static ssize_t rfkill_state_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct rfkill *rfkill = to_rfkill(dev); - unsigned long state; - int error; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - error = strict_strtoul(buf, 0, &state); - if (error) - return error; - - /* RFKILL_STATE_HARD_BLOCKED is illegal here... */ - if (state != RFKILL_STATE_UNBLOCKED && - state != RFKILL_STATE_SOFT_BLOCKED) - return -EINVAL; - - error = mutex_lock_killable(&rfkill->mutex); - if (error) - return error; - - if (!rfkill_epo_lock_active) - error = rfkill_toggle_radio(rfkill, state, 0); - else - error = -EPERM; - - mutex_unlock(&rfkill->mutex); - - return error ? error : count; -} - -static ssize_t rfkill_claim_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sprintf(buf, "%d\n", 0); -} - -static ssize_t rfkill_claim_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - return -EOPNOTSUPP; -} - -static struct device_attribute rfkill_dev_attrs[] = { - __ATTR(name, S_IRUGO, rfkill_name_show, NULL), - __ATTR(type, S_IRUGO, rfkill_type_show, NULL), - __ATTR(state, S_IRUGO|S_IWUSR, rfkill_state_show, rfkill_state_store), - __ATTR(claim, S_IRUGO|S_IWUSR, rfkill_claim_show, rfkill_claim_store), - __ATTR_NULL -}; - -static void rfkill_release(struct device *dev) -{ - struct rfkill *rfkill = to_rfkill(dev); - - kfree(rfkill); - module_put(THIS_MODULE); -} - -#ifdef CONFIG_PM -static int rfkill_suspend(struct device *dev, pm_message_t state) -{ - struct rfkill *rfkill = to_rfkill(dev); - - /* mark class device as suspended */ - if (dev->power.power_state.event != state.event) - dev->power.power_state = state; - - /* store state for the resume handler */ - rfkill->state_for_resume = rfkill->state; - - return 0; -} - -static int rfkill_resume(struct device *dev) -{ - struct rfkill *rfkill = to_rfkill(dev); - enum rfkill_state newstate; - - if (dev->power.power_state.event != PM_EVENT_ON) { - mutex_lock(&rfkill->mutex); - - dev->power.power_state.event = PM_EVENT_ON; - - /* - * rfkill->state could have been modified before we got - * called, and won't be updated by rfkill_toggle_radio() - * in force mode. Sync it FIRST. - */ - if (rfkill->get_state && - !rfkill->get_state(rfkill->data, &newstate)) - rfkill->state = newstate; - - /* - * If we are under EPO, kick transmitter offline, - * otherwise restore to pre-suspend state. - * - * Issue a notification in any case - */ - rfkill_toggle_radio(rfkill, - rfkill_epo_lock_active ? - RFKILL_STATE_SOFT_BLOCKED : - rfkill->state_for_resume, - 1); - - mutex_unlock(&rfkill->mutex); - rfkill_led_trigger(rfkill, rfkill->state); - } - - return 0; -} -#else -#define rfkill_suspend NULL -#define rfkill_resume NULL -#endif - -static int rfkill_dev_uevent(struct device *dev, struct kobj_uevent_env *env) -{ - struct rfkill *rfkill = to_rfkill(dev); - int error; - - error = add_uevent_var(env, "RFKILL_NAME=%s", rfkill->name); - if (error) - return error; - error = add_uevent_var(env, "RFKILL_TYPE=%s", - rfkill_get_type_str(rfkill->type)); - if (error) - return error; - error = add_uevent_var(env, "RFKILL_STATE=%d", rfkill->state); - return error; -} - -static struct class rfkill_class = { - .name = "rfkill", - .dev_release = rfkill_release, - .dev_attrs = rfkill_dev_attrs, - .suspend = rfkill_suspend, - .resume = rfkill_resume, - .dev_uevent = rfkill_dev_uevent, -}; - -static int rfkill_check_duplicity(const struct rfkill *rfkill) -{ - struct rfkill *p; - unsigned long seen[BITS_TO_LONGS(RFKILL_TYPE_MAX)]; - - memset(seen, 0, sizeof(seen)); - - list_for_each_entry(p, &rfkill_list, node) { - if (WARN((p == rfkill), KERN_WARNING - "rfkill: illegal attempt to register " - "an already registered rfkill struct\n")) - return -EEXIST; - set_bit(p->type, seen); - } - - /* 0: first switch of its kind */ - return (test_bit(rfkill->type, seen)) ? 1 : 0; -} - -static int rfkill_add_switch(struct rfkill *rfkill) -{ - int error; - - mutex_lock(&rfkill_global_mutex); - - error = rfkill_check_duplicity(rfkill); - if (error < 0) - goto unlock_out; - - if (!error) { - /* lock default after first use */ - set_bit(rfkill->type, rfkill_states_lockdflt); - rfkill_global_states[rfkill->type].current_state = - rfkill_global_states[rfkill->type].default_state; - } - - rfkill_toggle_radio(rfkill, - rfkill_global_states[rfkill->type].current_state, - 0); - - list_add_tail(&rfkill->node, &rfkill_list); - - error = 0; -unlock_out: - mutex_unlock(&rfkill_global_mutex); - - return error; -} - -static void rfkill_remove_switch(struct rfkill *rfkill) -{ - mutex_lock(&rfkill_global_mutex); - list_del_init(&rfkill->node); - mutex_unlock(&rfkill_global_mutex); - - mutex_lock(&rfkill->mutex); - rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); - mutex_unlock(&rfkill->mutex); -} - -/** - * rfkill_allocate - allocate memory for rfkill structure. - * @parent: device that has rf switch on it - * @type: type of the switch (RFKILL_TYPE_*) - * - * This function should be called by the network driver when it needs - * rfkill structure. Once the structure is allocated the driver should - * finish its initialization by setting the name, private data, enable_radio - * and disable_radio methods and then register it with rfkill_register(). - * - * NOTE: If registration fails the structure shoudl be freed by calling - * rfkill_free() otherwise rfkill_unregister() should be used. - */ -struct rfkill * __must_check rfkill_allocate(struct device *parent, - enum rfkill_type type) -{ - struct rfkill *rfkill; - struct device *dev; - - if (WARN((type >= RFKILL_TYPE_MAX), - KERN_WARNING - "rfkill: illegal type %d passed as parameter " - "to rfkill_allocate\n", type)) - return NULL; - - rfkill = kzalloc(sizeof(struct rfkill), GFP_KERNEL); - if (!rfkill) - return NULL; - - mutex_init(&rfkill->mutex); - INIT_LIST_HEAD(&rfkill->node); - rfkill->type = type; - - dev = &rfkill->dev; - dev->class = &rfkill_class; - dev->parent = parent; - device_initialize(dev); - - __module_get(THIS_MODULE); - - return rfkill; -} -EXPORT_SYMBOL(rfkill_allocate); - -/** - * rfkill_free - Mark rfkill structure for deletion - * @rfkill: rfkill structure to be destroyed - * - * Decrements reference count of the rfkill structure so it is destroyed. - * Note that rfkill_free() should _not_ be called after rfkill_unregister(). - */ -void rfkill_free(struct rfkill *rfkill) -{ - if (rfkill) - put_device(&rfkill->dev); -} -EXPORT_SYMBOL(rfkill_free); - -static void rfkill_led_trigger_register(struct rfkill *rfkill) -{ -#ifdef CONFIG_RFKILL_LEDS - int error; - - if (!rfkill->led_trigger.name) - rfkill->led_trigger.name = dev_name(&rfkill->dev); - if (!rfkill->led_trigger.activate) - rfkill->led_trigger.activate = rfkill_led_trigger_activate; - error = led_trigger_register(&rfkill->led_trigger); - if (error) - rfkill->led_trigger.name = NULL; -#endif /* CONFIG_RFKILL_LEDS */ -} - -static void rfkill_led_trigger_unregister(struct rfkill *rfkill) -{ -#ifdef CONFIG_RFKILL_LEDS - if (rfkill->led_trigger.name) { - led_trigger_unregister(&rfkill->led_trigger); - rfkill->led_trigger.name = NULL; - } -#endif -} - -/** - * rfkill_register - Register a rfkill structure. - * @rfkill: rfkill structure to be registered - * - * This function should be called by the network driver when the rfkill - * structure needs to be registered. Immediately from registration the - * switch driver should be able to service calls to toggle_radio. - */ -int __must_check rfkill_register(struct rfkill *rfkill) -{ - static atomic_t rfkill_no = ATOMIC_INIT(0); - struct device *dev = &rfkill->dev; - int error; - - if (WARN((!rfkill || !rfkill->toggle_radio || - rfkill->type >= RFKILL_TYPE_MAX || - rfkill->state >= RFKILL_STATE_MAX), - KERN_WARNING - "rfkill: attempt to register a " - "badly initialized rfkill struct\n")) - return -EINVAL; - - dev_set_name(dev, "rfkill%ld", (long)atomic_inc_return(&rfkill_no) - 1); - - rfkill_led_trigger_register(rfkill); - - error = rfkill_add_switch(rfkill); - if (error) { - rfkill_led_trigger_unregister(rfkill); - return error; - } - - error = device_add(dev); - if (error) { - rfkill_remove_switch(rfkill); - rfkill_led_trigger_unregister(rfkill); - return error; - } - - return 0; -} -EXPORT_SYMBOL(rfkill_register); - -/** - * rfkill_unregister - Unregister a rfkill structure. - * @rfkill: rfkill structure to be unregistered - * - * This function should be called by the network driver during device - * teardown to destroy rfkill structure. Note that rfkill_free() should - * _not_ be called after rfkill_unregister(). - */ -void rfkill_unregister(struct rfkill *rfkill) -{ - BUG_ON(!rfkill); - device_del(&rfkill->dev); - rfkill_remove_switch(rfkill); - rfkill_led_trigger_unregister(rfkill); - put_device(&rfkill->dev); -} -EXPORT_SYMBOL(rfkill_unregister); - -/** - * rfkill_set_default - set initial value for a switch type - * @type - the type of switch to set the default state of - * @state - the new default state for that group of switches - * - * Sets the initial state rfkill should use for a given type. - * The following initial states are allowed: RFKILL_STATE_SOFT_BLOCKED - * and RFKILL_STATE_UNBLOCKED. - * - * This function is meant to be used by platform drivers for platforms - * that can save switch state across power down/reboot. - * - * The default state for each switch type can be changed exactly once. - * After a switch of that type is registered, the default state cannot - * be changed anymore. This guards against multiple drivers it the - * same platform trying to set the initial switch default state, which - * is not allowed. - * - * Returns -EPERM if the state has already been set once or is in use, - * so drivers likely want to either ignore or at most printk(KERN_NOTICE) - * if this function returns -EPERM. - * - * Returns 0 if the new default state was set, or an error if it - * could not be set. - */ -int rfkill_set_default(enum rfkill_type type, enum rfkill_state state) -{ - int error; - - if (WARN((type >= RFKILL_TYPE_MAX || - (state != RFKILL_STATE_SOFT_BLOCKED && - state != RFKILL_STATE_UNBLOCKED)), - KERN_WARNING - "rfkill: illegal state %d or type %d passed as " - "parameter to rfkill_set_default\n", state, type)) - return -EINVAL; - - mutex_lock(&rfkill_global_mutex); - - if (!test_and_set_bit(type, rfkill_states_lockdflt)) { - rfkill_global_states[type].default_state = state; - rfkill_global_states[type].current_state = state; - error = 0; - } else - error = -EPERM; - - mutex_unlock(&rfkill_global_mutex); - return error; -} -EXPORT_SYMBOL_GPL(rfkill_set_default); - -/* - * Rfkill module initialization/deinitialization. - */ -static int __init rfkill_init(void) -{ - int error; - int i; - - /* RFKILL_STATE_HARD_BLOCKED is illegal here... */ - if (rfkill_default_state != RFKILL_STATE_SOFT_BLOCKED && - rfkill_default_state != RFKILL_STATE_UNBLOCKED) - return -EINVAL; - - for (i = 0; i < RFKILL_TYPE_MAX; i++) - rfkill_global_states[i].default_state = rfkill_default_state; - - error = class_register(&rfkill_class); - if (error) { - printk(KERN_ERR "rfkill: unable to register rfkill class\n"); - return error; - } - - return 0; -} - -static void __exit rfkill_exit(void) -{ - class_unregister(&rfkill_class); -} - -subsys_initcall(rfkill_init); -module_exit(rfkill_exit); diff --git a/net/rfkill/rfkill.h b/net/rfkill/rfkill.h new file mode 100644 index 0000000..d1117cb --- /dev/null +++ b/net/rfkill/rfkill.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2007 Ivo van Doorn + * Copyright 2009 Johannes Berg + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __RFKILL_INPUT_H +#define __RFKILL_INPUT_H + +/* core code */ +void rfkill_switch_all(const enum rfkill_type type, bool blocked); +void rfkill_epo(void); +void rfkill_restore_states(void); +void rfkill_remove_epo_lock(void); +bool rfkill_is_epo_lock_active(void); +bool rfkill_get_global_sw_state(const enum rfkill_type type); + +/* input handler */ +int rfkill_handler_init(void); +void rfkill_handler_exit(void); + +#endif /* __RFKILL_INPUT_H */ diff --git a/net/wimax/Kconfig b/net/wimax/Kconfig index 1b46747..0bdbb69 100644 --- a/net/wimax/Kconfig +++ b/net/wimax/Kconfig @@ -1,23 +1,9 @@ # # WiMAX LAN device configuration # -# Note the ugly 'depends on' on WIMAX: that disallows RFKILL to be a -# module if WIMAX is to be linked in. The WiMAX code is done in such a -# way that it doesn't require and explicit dependency on RFKILL in -# case an embedded system wants to rip it out. -# -# As well, enablement of the RFKILL code means we need the INPUT layer -# support to inject events coming from hw rfkill switches. That -# dependency could be killed if input.h provided appropriate means to -# work when input is disabled. - -comment "WiMAX Wireless Broadband support requires CONFIG_INPUT enabled" - depends on INPUT = n && RFKILL != n menuconfig WIMAX tristate "WiMAX Wireless Broadband support" - depends on (y && RFKILL != m) || m - depends on (INPUT && RFKILL != n) || RFKILL = n help Select to configure support for devices that provide diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c index a3616e2..bb102e4 100644 --- a/net/wimax/op-rfkill.c +++ b/net/wimax/op-rfkill.c @@ -29,8 +29,8 @@ * A non-polled generic rfkill device is embedded into the WiMAX * subsystem's representation of a device. * - * FIXME: Need polled support? use a timer or add the implementation - * to the stack. + * FIXME: Need polled support? Let drivers provide a poll routine + * and hand it to rfkill ops then? * * All device drivers have to do is after wimax_dev_init(), call * wimax_report_rfkill_hw() and wimax_report_rfkill_sw() to update @@ -43,7 +43,7 @@ * wimax_rfkill() Kernel calling wimax_rfkill() * __wimax_rf_toggle_radio() * - * wimax_rfkill_toggle_radio() RF-Kill subsytem calling + * wimax_rfkill_set_radio_block() RF-Kill subsytem calling * __wimax_rf_toggle_radio() * * __wimax_rf_toggle_radio() @@ -65,15 +65,11 @@ #include #include #include -#include #include "wimax-internal.h" #define D_SUBMODULE op_rfkill #include "debug-levels.h" -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - - /** * wimax_report_rfkill_hw - Reports changes in the hardware RF switch * @@ -99,7 +95,6 @@ void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev, int result; struct device *dev = wimax_dev_to_dev(wimax_dev); enum wimax_st wimax_state; - enum rfkill_state rfkill_state; d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state); BUG_ON(state == WIMAX_RF_QUERY); @@ -112,16 +107,15 @@ void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev, if (state != wimax_dev->rf_hw) { wimax_dev->rf_hw = state; - rfkill_state = state == WIMAX_RF_ON ? - RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED; if (wimax_dev->rf_hw == WIMAX_RF_ON && wimax_dev->rf_sw == WIMAX_RF_ON) wimax_state = WIMAX_ST_READY; else wimax_state = WIMAX_ST_RADIO_OFF; + + rfkill_set_hw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF); + __wimax_state_change(wimax_dev, wimax_state); - input_report_key(wimax_dev->rfkill_input, KEY_WIMAX, - rfkill_state); } error_not_ready: mutex_unlock(&wimax_dev->mutex); @@ -174,6 +168,7 @@ void wimax_report_rfkill_sw(struct wimax_dev *wimax_dev, else wimax_state = WIMAX_ST_RADIO_OFF; __wimax_state_change(wimax_dev, wimax_state); + rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF); } error_not_ready: mutex_unlock(&wimax_dev->mutex); @@ -249,36 +244,31 @@ out_no_change: * * NOTE: This call will block until the operation is completed. */ -static -int wimax_rfkill_toggle_radio(void *data, enum rfkill_state state) +static int wimax_rfkill_set_radio_block(void *data, bool blocked) { int result; struct wimax_dev *wimax_dev = data; struct device *dev = wimax_dev_to_dev(wimax_dev); enum wimax_rf_state rf_state; - d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state); - switch (state) { - case RFKILL_STATE_SOFT_BLOCKED: + d_fnstart(3, dev, "(wimax_dev %p blocked %u)\n", wimax_dev, blocked); + rf_state = WIMAX_RF_ON; + if (blocked) rf_state = WIMAX_RF_OFF; - break; - case RFKILL_STATE_UNBLOCKED: - rf_state = WIMAX_RF_ON; - break; - default: - BUG(); - } mutex_lock(&wimax_dev->mutex); if (wimax_dev->state <= __WIMAX_ST_QUIESCING) - result = 0; /* just pretend it didn't happen */ + result = 0; else result = __wimax_rf_toggle_radio(wimax_dev, rf_state); mutex_unlock(&wimax_dev->mutex); - d_fnend(3, dev, "(wimax_dev %p state %u) = %d\n", - wimax_dev, state, result); + d_fnend(3, dev, "(wimax_dev %p blocked %u) = %d\n", + wimax_dev, blocked, result); return result; } +static const struct rfkill_ops wimax_rfkill_ops = { + .set_block = wimax_rfkill_set_radio_block, +}; /** * wimax_rfkill - Set the software RF switch state for a WiMAX device @@ -322,6 +312,7 @@ int wimax_rfkill(struct wimax_dev *wimax_dev, enum wimax_rf_state state) result = __wimax_rf_toggle_radio(wimax_dev, state); if (result < 0) goto error; + rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF); break; case WIMAX_RF_QUERY: break; @@ -349,40 +340,20 @@ int wimax_rfkill_add(struct wimax_dev *wimax_dev) { int result; struct rfkill *rfkill; - struct input_dev *input_dev; struct device *dev = wimax_dev_to_dev(wimax_dev); d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev); /* Initialize RF Kill */ result = -ENOMEM; - rfkill = rfkill_allocate(dev, RFKILL_TYPE_WIMAX); + rfkill = rfkill_alloc(wimax_dev->name, dev, RFKILL_TYPE_WIMAX, + &wimax_rfkill_ops, wimax_dev); if (rfkill == NULL) goto error_rfkill_allocate; + + d_printf(1, dev, "rfkill %p\n", rfkill); + wimax_dev->rfkill = rfkill; - rfkill->name = wimax_dev->name; - rfkill->state = RFKILL_STATE_UNBLOCKED; - rfkill->data = wimax_dev; - rfkill->toggle_radio = wimax_rfkill_toggle_radio; - - /* Initialize the input device for the hw key */ - input_dev = input_allocate_device(); - if (input_dev == NULL) - goto error_input_allocate; - wimax_dev->rfkill_input = input_dev; - d_printf(1, dev, "rfkill %p input %p\n", rfkill, input_dev); - - input_dev->name = wimax_dev->name; - /* FIXME: get a real device bus ID and stuff? do we care? */ - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0xffff; - input_dev->evbit[0] = BIT(EV_KEY); - set_bit(KEY_WIMAX, input_dev->keybit); - - /* Register both */ - result = input_register_device(wimax_dev->rfkill_input); - if (result < 0) - goto error_input_register; result = rfkill_register(wimax_dev->rfkill); if (result < 0) goto error_rfkill_register; @@ -394,17 +365,8 @@ int wimax_rfkill_add(struct wimax_dev *wimax_dev) d_fnend(3, dev, "(wimax_dev %p) = 0\n", wimax_dev); return 0; - /* if rfkill_register() suceeds, can't use rfkill_free() any - * more, only rfkill_unregister() [it owns the refcount]; with - * the input device we have the same issue--hence the if. */ error_rfkill_register: - input_unregister_device(wimax_dev->rfkill_input); - wimax_dev->rfkill_input = NULL; -error_input_register: - if (wimax_dev->rfkill_input) - input_free_device(wimax_dev->rfkill_input); -error_input_allocate: - rfkill_free(wimax_dev->rfkill); + rfkill_destroy(wimax_dev->rfkill); error_rfkill_allocate: d_fnend(3, dev, "(wimax_dev %p) = %d\n", wimax_dev, result); return result; @@ -423,45 +385,12 @@ void wimax_rfkill_rm(struct wimax_dev *wimax_dev) { struct device *dev = wimax_dev_to_dev(wimax_dev); d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev); - rfkill_unregister(wimax_dev->rfkill); /* frees */ - input_unregister_device(wimax_dev->rfkill_input); + rfkill_unregister(wimax_dev->rfkill); + rfkill_destroy(wimax_dev->rfkill); d_fnend(3, dev, "(wimax_dev %p)\n", wimax_dev); } -#else /* #ifdef CONFIG_RFKILL */ - -void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev, - enum wimax_rf_state state) -{ -} -EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw); - -void wimax_report_rfkill_sw(struct wimax_dev *wimax_dev, - enum wimax_rf_state state) -{ -} -EXPORT_SYMBOL_GPL(wimax_report_rfkill_sw); - -int wimax_rfkill(struct wimax_dev *wimax_dev, - enum wimax_rf_state state) -{ - return WIMAX_RF_ON << 1 | WIMAX_RF_ON; -} -EXPORT_SYMBOL_GPL(wimax_rfkill); - -int wimax_rfkill_add(struct wimax_dev *wimax_dev) -{ - return 0; -} - -void wimax_rfkill_rm(struct wimax_dev *wimax_dev) -{ -} - -#endif /* #ifdef CONFIG_RFKILL */ - - /* * Exporting to user space over generic netlink * -- cgit v0.10.2 From c64fb01627e24725d1f9d535e4426475a4415753 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 2 Jun 2009 13:01:38 +0200 Subject: rfkill: create useful userspace interface The new code added by this patch will make rfkill create a misc character device /dev/rfkill that userspace can use to control rfkill soft blocks and get status of devices as well as events when the status changes. Using it is very simple -- when you open it you can read a number of times to get the initial state, and every further read blocks (you can poll) on getting the next event from the kernel. The same structure you read is also used when writing to it to change the soft block of a given device, all devices of a given type, or all devices. This also makes CONFIG_RFKILL_INPUT selectable again in order to be able to test without it present since its functionality can now be replaced by userspace entirely and distros and users may not want the input part of rfkill interfering with their userspace code. We will also write a userspace daemon to handle all that and consequently add the input code to the feature removal schedule. In order to have rfkilld support both kernels with and without CONFIG_RFKILL_INPUT (or new kernels after its eventual removal) we also add an ioctl (that only exists if rfkill-input is present) to disable rfkill-input. It is not very efficient, but at least gives the correct behaviour in all cases. Signed-off-by: Johannes Berg Acked-by: Marcel Holtmann Signed-off-by: John W. Linville diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index de491a3..edb2f0b 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -437,3 +437,10 @@ Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate driver but this caused driver conflicts. Who: Jean Delvare Krzysztof Helt + +--------------------------- + +What: CONFIG_RFKILL_INPUT +When: 2.6.33 +Why: Should be implemented in userspace, policy daemon. +Who: Johannes Berg diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 090852c..7c116f6 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -22,34 +22,17 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +#include /* define userspace visible states */ #define RFKILL_STATE_SOFT_BLOCKED 0 #define RFKILL_STATE_UNBLOCKED 1 #define RFKILL_STATE_HARD_BLOCKED 2 -/* and that's all userspace gets */ -#ifdef __KERNEL__ -/* don't allow anyone to use these in the kernel */ -enum rfkill_user_states { - RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED, - RFKILL_USER_STATE_UNBLOCKED = RFKILL_STATE_UNBLOCKED, - RFKILL_USER_STATE_HARD_BLOCKED = RFKILL_STATE_HARD_BLOCKED, -}; -#undef RFKILL_STATE_SOFT_BLOCKED -#undef RFKILL_STATE_UNBLOCKED -#undef RFKILL_STATE_HARD_BLOCKED - -#include -#include -#include -#include -#include -#include - /** * enum rfkill_type - type of rfkill switch. * + * @RFKILL_TYPE_ALL: toggles all switches (userspace only) * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. @@ -58,6 +41,7 @@ enum rfkill_user_states { * @NUM_RFKILL_TYPES: number of defined rfkill types */ enum rfkill_type { + RFKILL_TYPE_ALL = 0, RFKILL_TYPE_WLAN, RFKILL_TYPE_BLUETOOTH, RFKILL_TYPE_UWB, @@ -66,6 +50,62 @@ enum rfkill_type { NUM_RFKILL_TYPES, }; +/** + * enum rfkill_operation - operation types + * @RFKILL_OP_ADD: a device was added + * @RFKILL_OP_DEL: a device was removed + * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device + * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all) + */ +enum rfkill_operation { + RFKILL_OP_ADD = 0, + RFKILL_OP_DEL, + RFKILL_OP_CHANGE, + RFKILL_OP_CHANGE_ALL, +}; + +/** + * struct rfkill_event - events for userspace on /dev/rfkill + * @idx: index of dev rfkill + * @type: type of the rfkill struct + * @op: operation code + * @hard: hard state (0/1) + * @soft: soft state (0/1) + * + * Structure used for userspace communication on /dev/rfkill, + * used for events from the kernel and control to the kernel. + */ +struct rfkill_event { + __u32 idx; + __u8 type; + __u8 op; + __u8 soft, hard; +} __packed; + +/* ioctl for turning off rfkill-input (if present) */ +#define RFKILL_IOC_MAGIC 'R' +#define RFKILL_IOC_NOINPUT 1 +#define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT) + +/* and that's all userspace gets */ +#ifdef __KERNEL__ +/* don't allow anyone to use these in the kernel */ +enum rfkill_user_states { + RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED, + RFKILL_USER_STATE_UNBLOCKED = RFKILL_STATE_UNBLOCKED, + RFKILL_USER_STATE_HARD_BLOCKED = RFKILL_STATE_HARD_BLOCKED, +}; +#undef RFKILL_STATE_SOFT_BLOCKED +#undef RFKILL_STATE_UNBLOCKED +#undef RFKILL_STATE_HARD_BLOCKED + +#include +#include +#include +#include +#include +#include + /* this is opaque */ struct rfkill; @@ -84,11 +124,7 @@ struct rfkill; * the rfkill core query your driver before setting a requested * block. * @set_block: turn the transmitter on (blocked == false) or off - * (blocked == true) -- this is called only while the transmitter - * is not hard-blocked, but note that the core's view of whether - * the transmitter is hard-blocked might differ from your driver's - * view due to race conditions, so it is possible that it is still - * called at the same time as you are calling rfkill_set_hw_state(). + * (blocked == true) -- ignore and return 0 when hard blocked. * This callback must be assigned. */ struct rfkill_ops { diff --git a/net/rfkill/Kconfig b/net/rfkill/Kconfig index b47f72f..fd7600d 100644 --- a/net/rfkill/Kconfig +++ b/net/rfkill/Kconfig @@ -18,7 +18,7 @@ config RFKILL_LEDS default y config RFKILL_INPUT - bool + bool "RF switch input support" depends on RFKILL depends on INPUT = y || RFKILL = INPUT - default y + default y if !EMBEDDED diff --git a/net/rfkill/core.c b/net/rfkill/core.c index 30a6f8d..2230aa6 100644 --- a/net/rfkill/core.c +++ b/net/rfkill/core.c @@ -28,6 +28,10 @@ #include #include #include +#include +#include +#include +#include #include "rfkill.h" @@ -49,6 +53,8 @@ struct rfkill { unsigned long state; + u32 idx; + bool registered; bool suspended; @@ -69,6 +75,18 @@ struct rfkill { }; #define to_rfkill(d) container_of(d, struct rfkill, dev) +struct rfkill_int_event { + struct list_head list; + struct rfkill_event ev; +}; + +struct rfkill_data { + struct list_head list; + struct list_head events; + struct mutex mtx; + wait_queue_head_t read_wait; + bool input_handler; +}; MODULE_AUTHOR("Ivo van Doorn "); @@ -90,6 +108,7 @@ MODULE_LICENSE("GPL"); */ static LIST_HEAD(rfkill_list); /* list of registered rf switches */ static DEFINE_MUTEX(rfkill_global_mutex); +static LIST_HEAD(rfkill_fds); /* list of open fds of /dev/rfkill */ static unsigned int rfkill_default_state = 1; module_param_named(default_state, rfkill_default_state, uint, 0444); @@ -171,12 +190,48 @@ static inline void rfkill_led_trigger_unregister(struct rfkill *rfkill) } #endif /* CONFIG_RFKILL_LEDS */ -static void rfkill_uevent(struct rfkill *rfkill) +static void rfkill_fill_event(struct rfkill_event *ev, struct rfkill *rfkill, + enum rfkill_operation op) +{ + unsigned long flags; + + ev->idx = rfkill->idx; + ev->type = rfkill->type; + ev->op = op; + + spin_lock_irqsave(&rfkill->lock, flags); + ev->hard = !!(rfkill->state & RFKILL_BLOCK_HW); + ev->soft = !!(rfkill->state & (RFKILL_BLOCK_SW | + RFKILL_BLOCK_SW_PREV)); + spin_unlock_irqrestore(&rfkill->lock, flags); +} + +static void rfkill_send_events(struct rfkill *rfkill, enum rfkill_operation op) +{ + struct rfkill_data *data; + struct rfkill_int_event *ev; + + list_for_each_entry(data, &rfkill_fds, list) { + ev = kzalloc(sizeof(*ev), GFP_KERNEL); + if (!ev) + continue; + rfkill_fill_event(&ev->ev, rfkill, op); + mutex_lock(&data->mtx); + list_add_tail(&ev->list, &data->events); + mutex_unlock(&data->mtx); + wake_up_interruptible(&data->read_wait); + } +} + +static void rfkill_event(struct rfkill *rfkill) { if (!rfkill->registered || rfkill->suspended) return; kobject_uevent(&rfkill->dev.kobj, KOBJ_CHANGE); + + /* also send event to /dev/rfkill */ + rfkill_send_events(rfkill, RFKILL_OP_CHANGE); } static bool __rfkill_set_hw_state(struct rfkill *rfkill, @@ -260,9 +315,12 @@ static void rfkill_set_block(struct rfkill *rfkill, bool blocked) spin_unlock_irqrestore(&rfkill->lock, flags); rfkill_led_trigger_event(rfkill); - rfkill_uevent(rfkill); + rfkill_event(rfkill); } +#ifdef CONFIG_RFKILL_INPUT +static atomic_t rfkill_input_disabled = ATOMIC_INIT(0); + /** * __rfkill_switch_all - Toggle state of all switches of given type * @type: type of interfaces to be affected @@ -299,6 +357,9 @@ static void __rfkill_switch_all(const enum rfkill_type type, bool blocked) */ void rfkill_switch_all(enum rfkill_type type, bool blocked) { + if (atomic_read(&rfkill_input_disabled)) + return; + mutex_lock(&rfkill_global_mutex); if (!rfkill_epo_lock_active) @@ -321,6 +382,9 @@ void rfkill_epo(void) struct rfkill *rfkill; int i; + if (atomic_read(&rfkill_input_disabled)) + return; + mutex_lock(&rfkill_global_mutex); rfkill_epo_lock_active = true; @@ -331,6 +395,7 @@ void rfkill_epo(void) rfkill_global_states[i].def = rfkill_global_states[i].cur; rfkill_global_states[i].cur = true; } + mutex_unlock(&rfkill_global_mutex); } @@ -345,6 +410,9 @@ void rfkill_restore_states(void) { int i; + if (atomic_read(&rfkill_input_disabled)) + return; + mutex_lock(&rfkill_global_mutex); rfkill_epo_lock_active = false; @@ -361,6 +429,9 @@ void rfkill_restore_states(void) */ void rfkill_remove_epo_lock(void) { + if (atomic_read(&rfkill_input_disabled)) + return; + mutex_lock(&rfkill_global_mutex); rfkill_epo_lock_active = false; mutex_unlock(&rfkill_global_mutex); @@ -391,9 +462,12 @@ bool rfkill_get_global_sw_state(const enum rfkill_type type) { return rfkill_global_states[type].cur; } +#endif void rfkill_set_global_sw_state(const enum rfkill_type type, bool blocked) { + BUG_ON(type == RFKILL_TYPE_ALL); + mutex_lock(&rfkill_global_mutex); /* don't allow unblock when epo */ @@ -537,6 +611,15 @@ static ssize_t rfkill_type_show(struct device *dev, return sprintf(buf, "%s\n", rfkill_get_type_str(rfkill->type)); } +static ssize_t rfkill_idx_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct rfkill *rfkill = to_rfkill(dev); + + return sprintf(buf, "%d\n", rfkill->idx); +} + static u8 user_state_from_blocked(unsigned long state) { if (state & RFKILL_BLOCK_HW) @@ -594,6 +677,7 @@ static ssize_t rfkill_claim_store(struct device *dev, static struct device_attribute rfkill_dev_attrs[] = { __ATTR(name, S_IRUGO, rfkill_name_show, NULL), __ATTR(type, S_IRUGO, rfkill_type_show, NULL), + __ATTR(index, S_IRUGO, rfkill_idx_show, NULL), __ATTR(state, S_IRUGO|S_IWUSR, rfkill_state_show, rfkill_state_store), __ATTR(claim, S_IRUGO|S_IWUSR, rfkill_claim_show, rfkill_claim_store), __ATTR_NULL @@ -708,7 +792,7 @@ struct rfkill * __must_check rfkill_alloc(const char *name, if (WARN_ON(!name)) return NULL; - if (WARN_ON(type >= NUM_RFKILL_TYPES)) + if (WARN_ON(type == RFKILL_TYPE_ALL || type >= NUM_RFKILL_TYPES)) return NULL; rfkill = kzalloc(sizeof(*rfkill), GFP_KERNEL); @@ -754,7 +838,9 @@ static void rfkill_uevent_work(struct work_struct *work) rfkill = container_of(work, struct rfkill, uevent_work); - rfkill_uevent(rfkill); + mutex_lock(&rfkill_global_mutex); + rfkill_event(rfkill); + mutex_unlock(&rfkill_global_mutex); } static void rfkill_sync_work(struct work_struct *work) @@ -785,6 +871,7 @@ int __must_check rfkill_register(struct rfkill *rfkill) goto unlock; } + rfkill->idx = rfkill_no; dev_set_name(dev, "rfkill%lu", rfkill_no); rfkill_no++; @@ -819,6 +906,7 @@ int __must_check rfkill_register(struct rfkill *rfkill) INIT_WORK(&rfkill->sync_work, rfkill_sync_work); schedule_work(&rfkill->sync_work); + rfkill_send_events(rfkill, RFKILL_OP_ADD); mutex_unlock(&rfkill_global_mutex); return 0; @@ -848,6 +936,7 @@ void rfkill_unregister(struct rfkill *rfkill) device_del(&rfkill->dev); mutex_lock(&rfkill_global_mutex); + rfkill_send_events(rfkill, RFKILL_OP_DEL); list_del_init(&rfkill->node); mutex_unlock(&rfkill_global_mutex); @@ -862,6 +951,227 @@ void rfkill_destroy(struct rfkill *rfkill) } EXPORT_SYMBOL(rfkill_destroy); +static int rfkill_fop_open(struct inode *inode, struct file *file) +{ + struct rfkill_data *data; + struct rfkill *rfkill; + struct rfkill_int_event *ev, *tmp; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + INIT_LIST_HEAD(&data->events); + mutex_init(&data->mtx); + init_waitqueue_head(&data->read_wait); + + mutex_lock(&rfkill_global_mutex); + mutex_lock(&data->mtx); + /* + * start getting events from elsewhere but hold mtx to get + * startup events added first + */ + list_add(&data->list, &rfkill_fds); + + list_for_each_entry(rfkill, &rfkill_list, node) { + ev = kzalloc(sizeof(*ev), GFP_KERNEL); + if (!ev) + goto free; + rfkill_fill_event(&ev->ev, rfkill, RFKILL_OP_ADD); + list_add_tail(&ev->list, &data->events); + } + mutex_unlock(&data->mtx); + mutex_unlock(&rfkill_global_mutex); + + file->private_data = data; + + return nonseekable_open(inode, file); + + free: + mutex_unlock(&data->mtx); + mutex_unlock(&rfkill_global_mutex); + mutex_destroy(&data->mtx); + list_for_each_entry_safe(ev, tmp, &data->events, list) + kfree(ev); + kfree(data); + return -ENOMEM; +} + +static unsigned int rfkill_fop_poll(struct file *file, poll_table *wait) +{ + struct rfkill_data *data = file->private_data; + unsigned int res = POLLOUT | POLLWRNORM; + + poll_wait(file, &data->read_wait, wait); + + mutex_lock(&data->mtx); + if (!list_empty(&data->events)) + res = POLLIN | POLLRDNORM; + mutex_unlock(&data->mtx); + + return res; +} + +static bool rfkill_readable(struct rfkill_data *data) +{ + bool r; + + mutex_lock(&data->mtx); + r = !list_empty(&data->events); + mutex_unlock(&data->mtx); + + return r; +} + +static ssize_t rfkill_fop_read(struct file *file, char __user *buf, + size_t count, loff_t *pos) +{ + struct rfkill_data *data = file->private_data; + struct rfkill_int_event *ev; + unsigned long sz; + int ret; + + mutex_lock(&data->mtx); + + while (list_empty(&data->events)) { + if (file->f_flags & O_NONBLOCK) { + ret = -EAGAIN; + goto out; + } + mutex_unlock(&data->mtx); + ret = wait_event_interruptible(data->read_wait, + rfkill_readable(data)); + mutex_lock(&data->mtx); + + if (ret) + goto out; + } + + ev = list_first_entry(&data->events, struct rfkill_int_event, + list); + + sz = min_t(unsigned long, sizeof(ev->ev), count); + ret = sz; + if (copy_to_user(buf, &ev->ev, sz)) + ret = -EFAULT; + + list_del(&ev->list); + kfree(ev); + out: + mutex_unlock(&data->mtx); + return ret; +} + +static ssize_t rfkill_fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) +{ + struct rfkill *rfkill; + struct rfkill_event ev; + + /* we don't need the 'hard' variable but accept it */ + if (count < sizeof(ev) - 1) + return -EINVAL; + + if (copy_from_user(&ev, buf, sizeof(ev) - 1)) + return -EFAULT; + + if (ev.op != RFKILL_OP_CHANGE && ev.op != RFKILL_OP_CHANGE_ALL) + return -EINVAL; + + if (ev.type >= NUM_RFKILL_TYPES) + return -EINVAL; + + mutex_lock(&rfkill_global_mutex); + + if (ev.op == RFKILL_OP_CHANGE_ALL) { + if (ev.type == RFKILL_TYPE_ALL) { + enum rfkill_type i; + for (i = 0; i < NUM_RFKILL_TYPES; i++) + rfkill_global_states[i].cur = ev.soft; + } else { + rfkill_global_states[ev.type].cur = ev.soft; + } + } + + list_for_each_entry(rfkill, &rfkill_list, node) { + if (rfkill->idx != ev.idx && ev.op != RFKILL_OP_CHANGE_ALL) + continue; + + if (rfkill->type != ev.type && ev.type != RFKILL_TYPE_ALL) + continue; + + rfkill_set_block(rfkill, ev.soft); + } + mutex_unlock(&rfkill_global_mutex); + + return count; +} + +static int rfkill_fop_release(struct inode *inode, struct file *file) +{ + struct rfkill_data *data = file->private_data; + struct rfkill_int_event *ev, *tmp; + + mutex_lock(&rfkill_global_mutex); + list_del(&data->list); + mutex_unlock(&rfkill_global_mutex); + + mutex_destroy(&data->mtx); + list_for_each_entry_safe(ev, tmp, &data->events, list) + kfree(ev); + +#ifdef CONFIG_RFKILL_INPUT + if (data->input_handler) + atomic_dec(&rfkill_input_disabled); +#endif + + kfree(data); + + return 0; +} + +#ifdef CONFIG_RFKILL_INPUT +static long rfkill_fop_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct rfkill_data *data = file->private_data; + + if (_IOC_TYPE(cmd) != RFKILL_IOC_MAGIC) + return -ENOSYS; + + if (_IOC_NR(cmd) != RFKILL_IOC_NOINPUT) + return -ENOSYS; + + mutex_lock(&data->mtx); + + if (!data->input_handler) { + atomic_inc(&rfkill_input_disabled); + data->input_handler = true; + } + + mutex_unlock(&data->mtx); + + return 0; +} +#endif + +static const struct file_operations rfkill_fops = { + .open = rfkill_fop_open, + .read = rfkill_fop_read, + .write = rfkill_fop_write, + .poll = rfkill_fop_poll, + .release = rfkill_fop_release, +#ifdef CONFIG_RFKILL_INPUT + .unlocked_ioctl = rfkill_fop_ioctl, + .compat_ioctl = rfkill_fop_ioctl, +#endif +}; + +static struct miscdevice rfkill_miscdev = { + .name = "rfkill", + .fops = &rfkill_fops, + .minor = MISC_DYNAMIC_MINOR, +}; static int __init rfkill_init(void) { @@ -875,10 +1185,19 @@ static int __init rfkill_init(void) if (error) goto out; + error = misc_register(&rfkill_miscdev); + if (error) { + class_unregister(&rfkill_class); + goto out; + } + #ifdef CONFIG_RFKILL_INPUT error = rfkill_handler_init(); - if (error) + if (error) { + misc_deregister(&rfkill_miscdev); class_unregister(&rfkill_class); + goto out; + } #endif out: @@ -891,6 +1210,7 @@ static void __exit rfkill_exit(void) #ifdef CONFIG_RFKILL_INPUT rfkill_handler_exit(); #endif + misc_deregister(&rfkill_miscdev); class_unregister(&rfkill_class); } module_exit(rfkill_exit); -- cgit v0.10.2 From 7643a2c3fcc13cd6fbd731f214463547383418ae Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 2 Jun 2009 13:01:39 +0200 Subject: cfg80211: move txpower wext from mac80211 This patch introduces new cfg80211 API to set the TX power via cfg80211, puts the wext code into cfg80211 and updates mac80211 to use all that. The -ENETDOWN bits are a hack but will go away soon. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f20da7d..8b8e4b8 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -752,6 +752,21 @@ enum wiphy_params_flags { }; /** + * enum tx_power_setting - TX power adjustment + * + * @TX_POWER_AUTOMATIC: the dbm parameter is ignored + * @TX_POWER_LIMITED: limit TX power by the dbm parameter + * @TX_POWER_FIXED: fix TX power to the dbm parameter + * @TX_POWER_OFF: turn off completely (will go away) + */ +enum tx_power_setting { + TX_POWER_AUTOMATIC, + TX_POWER_LIMITED, + TX_POWER_FIXED, + TX_POWER_OFF, +}; + +/** * struct cfg80211_ops - backend description for wireless configuration * * This struct is registered by fullmac card drivers and/or wireless stacks @@ -837,6 +852,11 @@ enum wiphy_params_flags { * @changed bitfield (see &enum wiphy_params_flags) describes which values * have changed. The actual parameter values are available in * struct wiphy. If returning an error, no value should be changed. + * + * @set_tx_power: set the transmit power according to the parameters + * @get_tx_power: store the current TX power into the dbm variable; + * return 0 if successful; or -ENETDOWN if successful but power + * is disabled (this will go away) */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy); @@ -928,6 +948,10 @@ struct cfg80211_ops { int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); + + int (*set_tx_power)(struct wiphy *wiphy, + enum tx_power_setting type, int dbm); + int (*get_tx_power)(struct wiphy *wiphy, int *dbm); }; /* @@ -1451,6 +1475,12 @@ int cfg80211_wext_siwencode(struct net_device *dev, int cfg80211_wext_giwencode(struct net_device *dev, struct iw_request_info *info, struct iw_point *erq, char *keybuf); +int cfg80211_wext_siwtxpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *data, char *keybuf); +int cfg80211_wext_giwtxpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *data, char *keybuf); /* * callbacks for asynchronous cfg80211 methods, notification diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index d2fc18c..81258ac 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1334,6 +1334,58 @@ static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed) return 0; } +static int ieee80211_set_tx_power(struct wiphy *wiphy, + enum tx_power_setting type, int dbm) +{ + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_channel *chan = local->hw.conf.channel; + u32 changes = 0; + bool radio_enabled = true; + + switch (type) { + case TX_POWER_AUTOMATIC: + local->user_power_level = -1; + break; + case TX_POWER_LIMITED: + if (dbm < 0) + return -EINVAL; + local->user_power_level = dbm; + break; + case TX_POWER_FIXED: + if (dbm < 0) + return -EINVAL; + /* TODO: move to cfg80211 when it knows the channel */ + if (dbm > chan->max_power) + return -EINVAL; + local->user_power_level = dbm; + break; + case TX_POWER_OFF: + radio_enabled = false; + break; + } + + if (radio_enabled != local->hw.conf.radio_enabled) { + changes |= IEEE80211_CONF_CHANGE_RADIO_ENABLED; + local->hw.conf.radio_enabled = radio_enabled; + } + + ieee80211_hw_config(local, changes); + + return 0; +} + +static int ieee80211_get_tx_power(struct wiphy *wiphy, int *dbm) +{ + struct ieee80211_local *local = wiphy_priv(wiphy); + + *dbm = local->hw.conf.power_level; + + if (!local->hw.conf.radio_enabled) + return -ENETDOWN; + + return 0; +} + struct cfg80211_ops mac80211_config_ops = { .add_virtual_intf = ieee80211_add_iface, .del_virtual_intf = ieee80211_del_iface, @@ -1373,4 +1425,6 @@ struct cfg80211_ops mac80211_config_ops = { .join_ibss = ieee80211_join_ibss, .leave_ibss = ieee80211_leave_ibss, .set_wiphy_params = ieee80211_set_wiphy_params, + .set_tx_power = ieee80211_set_tx_power, + .get_tx_power = ieee80211_get_tx_power, }; diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index a01154e..d2d81b1 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -306,82 +306,6 @@ static int ieee80211_ioctl_giwrate(struct net_device *dev, return 0; } -static int ieee80211_ioctl_siwtxpower(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *data, char *extra) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_channel* chan = local->hw.conf.channel; - bool reconf = false; - u32 reconf_flags = 0; - int new_power_level; - - if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM) - return -EINVAL; - if (data->txpower.flags & IW_TXPOW_RANGE) - return -EINVAL; - if (!chan) - return -EINVAL; - - /* only change when not disabling */ - if (!data->txpower.disabled) { - if (data->txpower.fixed) { - if (data->txpower.value < 0) - return -EINVAL; - new_power_level = data->txpower.value; - /* - * Debatable, but we cannot do a fixed power - * level above the regulatory constraint. - * Use "iwconfig wlan0 txpower 15dBm" instead. - */ - if (new_power_level > chan->max_power) - return -EINVAL; - } else { - /* - * Automatic power level setting, max being the value - * passed in from userland. - */ - if (data->txpower.value < 0) - new_power_level = -1; - else - new_power_level = data->txpower.value; - } - - reconf = true; - - /* - * ieee80211_hw_config() will limit to the channel's - * max power and possibly power constraint from AP. - */ - local->user_power_level = new_power_level; - } - - if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) { - local->hw.conf.radio_enabled = !(data->txpower.disabled); - reconf_flags |= IEEE80211_CONF_CHANGE_RADIO_ENABLED; - ieee80211_led_radio(local, local->hw.conf.radio_enabled); - } - - if (reconf || reconf_flags) - ieee80211_hw_config(local, reconf_flags); - - return 0; -} - -static int ieee80211_ioctl_giwtxpower(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *data, char *extra) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - - data->txpower.fixed = 1; - data->txpower.disabled = !(local->hw.conf.radio_enabled); - data->txpower.value = local->hw.conf.power_level; - data->txpower.flags = IW_TXPOW_DBM; - - return 0; -} - static int ieee80211_ioctl_siwpower(struct net_device *dev, struct iw_request_info *info, struct iw_param *wrq, @@ -658,8 +582,8 @@ static const iw_handler ieee80211_handler[] = (iw_handler) cfg80211_wext_giwrts, /* SIOCGIWRTS */ (iw_handler) cfg80211_wext_siwfrag, /* SIOCSIWFRAG */ (iw_handler) cfg80211_wext_giwfrag, /* SIOCGIWFRAG */ - (iw_handler) ieee80211_ioctl_siwtxpower, /* SIOCSIWTXPOW */ - (iw_handler) ieee80211_ioctl_giwtxpower, /* SIOCGIWTXPOW */ + (iw_handler) cfg80211_wext_siwtxpower, /* SIOCSIWTXPOW */ + (iw_handler) cfg80211_wext_giwtxpower, /* SIOCGIWTXPOW */ (iw_handler) cfg80211_wext_siwretry, /* SIOCSIWRETRY */ (iw_handler) cfg80211_wext_giwretry, /* SIOCGIWRETRY */ (iw_handler) cfg80211_wext_siwencode, /* SIOCSIWENCODE */ diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index 711e00a..9fbfb85 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -744,3 +744,83 @@ int cfg80211_wext_giwencode(struct net_device *dev, return err; } EXPORT_SYMBOL_GPL(cfg80211_wext_giwencode); + +int cfg80211_wext_siwtxpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *data, char *extra) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); + enum tx_power_setting type; + int dbm = 0; + + if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM) + return -EINVAL; + if (data->txpower.flags & IW_TXPOW_RANGE) + return -EINVAL; + + if (!rdev->ops->set_tx_power) + return -EOPNOTSUPP; + + /* only change when not disabling */ + if (!data->txpower.disabled) { + if (data->txpower.fixed) { + /* + * wext doesn't support negative values, see + * below where it's for automatic + */ + if (data->txpower.value < 0) + return -EINVAL; + dbm = data->txpower.value; + type = TX_POWER_FIXED; + /* TODO: do regulatory check! */ + } else { + /* + * Automatic power level setting, max being the value + * passed in from userland. + */ + if (data->txpower.value < 0) { + type = TX_POWER_AUTOMATIC; + } else { + dbm = data->txpower.value; + type = TX_POWER_LIMITED; + } + } + } else { + type = TX_POWER_OFF; + } + + return rdev->ops->set_tx_power(wdev->wiphy, type, dbm);; +} +EXPORT_SYMBOL_GPL(cfg80211_wext_siwtxpower); + +int cfg80211_wext_giwtxpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *data, char *extra) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); + int err, val; + + if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM) + return -EINVAL; + if (data->txpower.flags & IW_TXPOW_RANGE) + return -EINVAL; + + if (!rdev->ops->get_tx_power) + return -EOPNOTSUPP; + + err = rdev->ops->get_tx_power(wdev->wiphy, &val); + /* HACK!!! */ + if (err && err != -ENETDOWN) + return err; + + /* well... oh well */ + data->txpower.fixed = 1; + data->txpower.disabled = err == -ENETDOWN; + data->txpower.value = val; + data->txpower.flags = IW_TXPOW_DBM; + + return 0; +} +EXPORT_SYMBOL_GPL(cfg80211_wext_giwtxpower); -- cgit v0.10.2 From 6081162e2ed78dfcf149b076b047078ab1445cc2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 2 Jun 2009 13:01:40 +0200 Subject: rfkill: add function to query state Sometimes it is necessary to know how the state is, and it is easier to query rfkill than keep track of it somewhere else, so add a function for that. This could later be expanded to return hard/soft block, but so far that isn't necessary. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 7c116f6..ee3edde 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -261,6 +261,13 @@ void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw); * registered drivers? */ void rfkill_set_global_sw_state(const enum rfkill_type type, bool blocked); + +/** + * rfkill_blocked - query rfkill block + * + * @rfkill: rfkill struct to query + */ +bool rfkill_blocked(struct rfkill *rfkill); #else /* !RFKILL */ static inline struct rfkill * __must_check rfkill_alloc(const char *name, @@ -313,6 +320,11 @@ static inline void rfkill_set_global_sw_state(const enum rfkill_type type, bool blocked) { } + +static inline bool rfkill_blocked(struct rfkill *rfkill) +{ + return false; +} #endif /* RFKILL || RFKILL_MODULE */ diff --git a/net/rfkill/core.c b/net/rfkill/core.c index 2230aa6..91e9168 100644 --- a/net/rfkill/core.c +++ b/net/rfkill/core.c @@ -773,6 +773,19 @@ static struct class rfkill_class = { .resume = rfkill_resume, }; +bool rfkill_blocked(struct rfkill *rfkill) +{ + unsigned long flags; + u32 state; + + spin_lock_irqsave(&rfkill->lock, flags); + state = rfkill->state; + spin_unlock_irqrestore(&rfkill->lock, flags); + + return !!(state & RFKILL_BLOCK_ANY); +} +EXPORT_SYMBOL(rfkill_blocked); + struct rfkill * __must_check rfkill_alloc(const char *name, struct device *parent, -- cgit v0.10.2 From 1f87f7d3a3b42b20f34cb03f0fd1a41c3d0e27f3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 2 Jun 2009 13:01:41 +0200 Subject: cfg80211: add rfkill support To be easier on drivers and users, have cfg80211 register an rfkill structure that drivers can access. When soft-killed, simply take down all interfaces; when hard-killed the driver needs to notify us and we will take down the interfaces after the fact. While rfkilled, interfaces cannot be set UP. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/include/asm-generic/errno.h b/include/asm-generic/errno.h index e8852c0..28cc03b 100644 --- a/include/asm-generic/errno.h +++ b/include/asm-generic/errno.h @@ -106,4 +106,6 @@ #define EOWNERDEAD 130 /* Owner died */ #define ENOTRECOVERABLE 131 /* State not recoverable */ +#define ERFKILL 132 /* Operation not possible due to RF-kill */ + #endif diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8b8e4b8..1a21895 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -757,13 +757,11 @@ enum wiphy_params_flags { * @TX_POWER_AUTOMATIC: the dbm parameter is ignored * @TX_POWER_LIMITED: limit TX power by the dbm parameter * @TX_POWER_FIXED: fix TX power to the dbm parameter - * @TX_POWER_OFF: turn off completely (will go away) */ enum tx_power_setting { TX_POWER_AUTOMATIC, TX_POWER_LIMITED, TX_POWER_FIXED, - TX_POWER_OFF, }; /** @@ -855,8 +853,10 @@ enum tx_power_setting { * * @set_tx_power: set the transmit power according to the parameters * @get_tx_power: store the current TX power into the dbm variable; - * return 0 if successful; or -ENETDOWN if successful but power - * is disabled (this will go away) + * return 0 if successful + * + * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting + * functions to adjust rfkill hw state */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy); @@ -952,6 +952,8 @@ struct cfg80211_ops { int (*set_tx_power)(struct wiphy *wiphy, enum tx_power_setting type, int dbm); int (*get_tx_power)(struct wiphy *wiphy, int *dbm); + + void (*rfkill_poll)(struct wiphy *wiphy); }; /* @@ -1666,4 +1668,23 @@ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr, */ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp); +/** + * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state + * @wiphy: the wiphy + * @blocked: block status + */ +void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked); + +/** + * wiphy_rfkill_start_polling - start polling rfkill + * @wiphy: the wiphy + */ +void wiphy_rfkill_start_polling(struct wiphy *wiphy); + +/** + * wiphy_rfkill_stop_polling - stop polling rfkill + * @wiphy: the wiphy + */ +void wiphy_rfkill_stop_polling(struct wiphy *wiphy); + #endif /* __NET_CFG80211_H */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0270aa6..17d61d1 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -526,7 +526,7 @@ enum ieee80211_conf_flags { /** * enum ieee80211_conf_changed - denotes which configuration changed * - * @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed + * @_IEEE80211_CONF_CHANGE_RADIO_ENABLED: DEPRECATED * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed @@ -536,7 +536,7 @@ enum ieee80211_conf_flags { * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed */ enum ieee80211_conf_changed { - IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), + _IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3), IEEE80211_CONF_CHANGE_PS = BIT(4), @@ -546,6 +546,14 @@ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_IDLE = BIT(8), }; +static inline __deprecated enum ieee80211_conf_changed +__IEEE80211_CONF_CHANGE_RADIO_ENABLED(void) +{ + return _IEEE80211_CONF_CHANGE_RADIO_ENABLED; +} +#define IEEE80211_CONF_CHANGE_RADIO_ENABLED \ + __IEEE80211_CONF_CHANGE_RADIO_ENABLED() + /** * struct ieee80211_conf - configuration of the device * @@ -585,7 +593,7 @@ struct ieee80211_conf { int max_sleep_period; u16 listen_interval; - bool radio_enabled; + bool __deprecated radio_enabled; u8 long_frame_max_tx_count, short_frame_max_tx_count; @@ -1396,6 +1404,10 @@ enum ieee80211_ampdu_mlme_action { * is the first frame we expect to perform the action on. Notice * that TX/RX_STOP can pass NULL for this parameter. * Returns a negative error code on failure. + * + * @rfkill_poll: Poll rfkill hardware state. If you need this, you also + * need to set wiphy->rfkill_poll to %true before registration, + * and need to call wiphy_rfkill_set_hw_state() in the callback. */ struct ieee80211_ops { int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); @@ -1444,6 +1456,8 @@ struct ieee80211_ops { int (*ampdu_action)(struct ieee80211_hw *hw, enum ieee80211_ampdu_mlme_action action, struct ieee80211_sta *sta, u16 tid, u16 *ssn); + + void (*rfkill_poll)(struct ieee80211_hw *hw); }; /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 81258ac..a9211cc 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1340,7 +1340,6 @@ static int ieee80211_set_tx_power(struct wiphy *wiphy, struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_channel *chan = local->hw.conf.channel; u32 changes = 0; - bool radio_enabled = true; switch (type) { case TX_POWER_AUTOMATIC: @@ -1359,14 +1358,6 @@ static int ieee80211_set_tx_power(struct wiphy *wiphy, return -EINVAL; local->user_power_level = dbm; break; - case TX_POWER_OFF: - radio_enabled = false; - break; - } - - if (radio_enabled != local->hw.conf.radio_enabled) { - changes |= IEEE80211_CONF_CHANGE_RADIO_ENABLED; - local->hw.conf.radio_enabled = radio_enabled; } ieee80211_hw_config(local, changes); @@ -1380,12 +1371,16 @@ static int ieee80211_get_tx_power(struct wiphy *wiphy, int *dbm) *dbm = local->hw.conf.power_level; - if (!local->hw.conf.radio_enabled) - return -ENETDOWN; - return 0; } +static void ieee80211_rfkill_poll(struct wiphy *wiphy) +{ + struct ieee80211_local *local = wiphy_priv(wiphy); + + drv_rfkill_poll(local); +} + struct cfg80211_ops mac80211_config_ops = { .add_virtual_intf = ieee80211_add_iface, .del_virtual_intf = ieee80211_del_iface, @@ -1427,4 +1422,5 @@ struct cfg80211_ops mac80211_config_ops = { .set_wiphy_params = ieee80211_set_wiphy_params, .set_tx_power = ieee80211_set_tx_power, .get_tx_power = ieee80211_get_tx_power, + .rfkill_poll = ieee80211_rfkill_poll, }; diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 3912b53..b13446a 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -181,4 +181,11 @@ static inline int drv_ampdu_action(struct ieee80211_local *local, sta, tid, ssn); return -EOPNOTSUPP; } + + +static inline void drv_rfkill_poll(struct ieee80211_local *local) +{ + if (local->ops->rfkill_poll) + local->ops->rfkill_poll(&local->hw); +} #endif /* __MAC80211_DRIVER_OPS */ diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 8c9f1c7..b7c8a44 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -170,7 +170,7 @@ static int ieee80211_open(struct net_device *dev) goto err_del_bss; /* we're brought up, everything changes */ hw_reconf_flags = ~0; - ieee80211_led_radio(local, local->hw.conf.radio_enabled); + ieee80211_led_radio(local, true); } /* @@ -560,7 +560,7 @@ static int ieee80211_stop(struct net_device *dev) drv_stop(local); - ieee80211_led_radio(local, 0); + ieee80211_led_radio(local, false); flush_workqueue(local->hw.workqueue); diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 31284c9..22f6381 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -973,7 +973,7 @@ int ieee80211_reconfig(struct ieee80211_local *local) if (local->open_count) { res = drv_start(local); - ieee80211_led_radio(local, hw->conf.radio_enabled); + ieee80211_led_radio(local, true); } /* add interfaces */ diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig index 4500549..4428dd5 100644 --- a/net/wireless/Kconfig +++ b/net/wireless/Kconfig @@ -1,5 +1,6 @@ config CFG80211 - tristate "Improved wireless configuration API" + tristate "Improved wireless configuration API" + depends on RFKILL || !RFKILL config CFG80211_REG_DEBUG bool "cfg80211 regulatory debugging" diff --git a/net/wireless/core.c b/net/wireless/core.c index a5dbea1..3b74b88 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include "nl80211.h" @@ -227,6 +228,41 @@ int cfg80211_dev_rename(struct cfg80211_registered_device *rdev, return 0; } +static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data) +{ + struct cfg80211_registered_device *drv = data; + + drv->ops->rfkill_poll(&drv->wiphy); +} + +static int cfg80211_rfkill_set_block(void *data, bool blocked) +{ + struct cfg80211_registered_device *drv = data; + struct wireless_dev *wdev; + + if (!blocked) + return 0; + + rtnl_lock(); + mutex_lock(&drv->devlist_mtx); + + list_for_each_entry(wdev, &drv->netdev_list, list) + dev_close(wdev->netdev); + + mutex_unlock(&drv->devlist_mtx); + rtnl_unlock(); + + return 0; +} + +static void cfg80211_rfkill_sync_work(struct work_struct *work) +{ + struct cfg80211_registered_device *drv; + + drv = container_of(work, struct cfg80211_registered_device, rfkill_sync); + cfg80211_rfkill_set_block(drv, rfkill_blocked(drv->rfkill)); +} + /* exported functions */ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) @@ -274,6 +310,18 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) drv->wiphy.dev.class = &ieee80211_class; drv->wiphy.dev.platform_data = drv; + drv->rfkill_ops.set_block = cfg80211_rfkill_set_block; + drv->rfkill = rfkill_alloc(dev_name(&drv->wiphy.dev), + &drv->wiphy.dev, RFKILL_TYPE_WLAN, + &drv->rfkill_ops, drv); + + if (!drv->rfkill) { + kfree(drv); + return NULL; + } + + INIT_WORK(&drv->rfkill_sync, cfg80211_rfkill_sync_work); + /* * Initialize wiphy parameters to IEEE 802.11 MIB default values. * Fragmentation and RTS threshold are disabled by default with the @@ -356,6 +404,10 @@ int wiphy_register(struct wiphy *wiphy) if (res) goto out_unlock; + res = rfkill_register(drv->rfkill); + if (res) + goto out_rm_dev; + list_add(&drv->list, &cfg80211_drv_list); /* add to debugfs */ @@ -379,16 +431,41 @@ int wiphy_register(struct wiphy *wiphy) cfg80211_debugfs_drv_add(drv); res = 0; -out_unlock: + goto out_unlock; + + out_rm_dev: + device_del(&drv->wiphy.dev); + out_unlock: mutex_unlock(&cfg80211_mutex); return res; } EXPORT_SYMBOL(wiphy_register); +void wiphy_rfkill_start_polling(struct wiphy *wiphy) +{ + struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy); + + if (!drv->ops->rfkill_poll) + return; + drv->rfkill_ops.poll = cfg80211_rfkill_poll; + rfkill_resume_polling(drv->rfkill); +} +EXPORT_SYMBOL(wiphy_rfkill_start_polling); + +void wiphy_rfkill_stop_polling(struct wiphy *wiphy) +{ + struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy); + + rfkill_pause_polling(drv->rfkill); +} +EXPORT_SYMBOL(wiphy_rfkill_stop_polling); + void wiphy_unregister(struct wiphy *wiphy) { struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy); + rfkill_unregister(drv->rfkill); + /* protect the device list */ mutex_lock(&cfg80211_mutex); @@ -425,6 +502,7 @@ EXPORT_SYMBOL(wiphy_unregister); void cfg80211_dev_free(struct cfg80211_registered_device *drv) { struct cfg80211_internal_bss *scan, *tmp; + rfkill_destroy(drv->rfkill); mutex_destroy(&drv->mtx); mutex_destroy(&drv->devlist_mtx); list_for_each_entry_safe(scan, tmp, &drv->bss_list, list) @@ -438,6 +516,15 @@ void wiphy_free(struct wiphy *wiphy) } EXPORT_SYMBOL(wiphy_free); +void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked) +{ + struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy); + + if (rfkill_set_hw_state(drv->rfkill, blocked)) + schedule_work(&drv->rfkill_sync); +} +EXPORT_SYMBOL(wiphy_rfkill_set_hw_state); + static int cfg80211_netdev_notifier_call(struct notifier_block * nb, unsigned long state, void *ndev) @@ -446,7 +533,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb, struct cfg80211_registered_device *rdev; if (!dev->ieee80211_ptr) - return 0; + return NOTIFY_DONE; rdev = wiphy_to_dev(dev->ieee80211_ptr->wiphy); @@ -492,9 +579,13 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb, } mutex_unlock(&rdev->devlist_mtx); break; + case NETDEV_PRE_UP: + if (rfkill_blocked(rdev->rfkill)) + return notifier_from_errno(-ERFKILL); + break; } - return 0; + return NOTIFY_DONE; } static struct notifier_block cfg80211_netdev_notifier = { diff --git a/net/wireless/core.h b/net/wireless/core.h index ab512bc..bfa340c 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -11,6 +11,8 @@ #include #include #include +#include +#include #include #include #include "reg.h" @@ -24,6 +26,11 @@ struct cfg80211_registered_device { * any call is in progress */ struct mutex mtx; + /* rfkill support */ + struct rfkill_ops rfkill_ops; + struct rfkill *rfkill; + struct work_struct rfkill_sync; + /* ISO / IEC 3166 alpha2 for which this device is receiving * country IEs on, this can help disregard country IEs from APs * on the same alpha2 quickly. The alpha2 may differ from diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index 9fbfb85..d030c53 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -764,6 +764,8 @@ int cfg80211_wext_siwtxpower(struct net_device *dev, /* only change when not disabling */ if (!data->txpower.disabled) { + rfkill_set_sw_state(rdev->rfkill, false); + if (data->txpower.fixed) { /* * wext doesn't support negative values, see @@ -787,7 +789,9 @@ int cfg80211_wext_siwtxpower(struct net_device *dev, } } } else { - type = TX_POWER_OFF; + rfkill_set_sw_state(rdev->rfkill, true); + schedule_work(&rdev->rfkill_sync); + return 0; } return rdev->ops->set_tx_power(wdev->wiphy, type, dbm);; @@ -811,13 +815,12 @@ int cfg80211_wext_giwtxpower(struct net_device *dev, return -EOPNOTSUPP; err = rdev->ops->get_tx_power(wdev->wiphy, &val); - /* HACK!!! */ - if (err && err != -ENETDOWN) + if (err) return err; /* well... oh well */ data->txpower.fixed = 1; - data->txpower.disabled = err == -ENETDOWN; + data->txpower.disabled = rfkill_blocked(rdev->rfkill); data->txpower.value = val; data->txpower.flags = IW_TXPOW_DBM; -- cgit v0.10.2 From 76963bb602ba91927130a0140d5757a5969e08ac Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 2 Jun 2009 13:01:42 +0200 Subject: iwm: port to new cfg80211 rfkill Which means removing all rfkill code since it only does soft-kill which cfg80211 will now handle in exactly the same way the driver did. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig index 41bd4b2..a907aa9 100644 --- a/drivers/net/wireless/iwmc3200wifi/Kconfig +++ b/drivers/net/wireless/iwmc3200wifi/Kconfig @@ -4,7 +4,6 @@ config IWM select WIRELESS_EXT select CFG80211 select FW_LOADER - select RFKILL config IWM_DEBUG bool "Enable full debugging output in iwmc3200wifi" diff --git a/drivers/net/wireless/iwmc3200wifi/Makefile b/drivers/net/wireless/iwmc3200wifi/Makefile index 7cb415e..927f022 100644 --- a/drivers/net/wireless/iwmc3200wifi/Makefile +++ b/drivers/net/wireless/iwmc3200wifi/Makefile @@ -1,5 +1,5 @@ obj-$(CONFIG_IWM) := iwmc3200wifi.o iwmc3200wifi-objs += main.o netdev.o rx.o tx.o sdio.o hal.o fw.o -iwmc3200wifi-objs += commands.o wext.o cfg80211.o eeprom.o rfkill.o +iwmc3200wifi-objs += commands.o wext.o cfg80211.o eeprom.o iwmc3200wifi-$(CONFIG_IWM_DEBUG) += debugfs.o diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h index 3b29681..635c16e 100644 --- a/drivers/net/wireless/iwmc3200wifi/iwm.h +++ b/drivers/net/wireless/iwmc3200wifi/iwm.h @@ -343,8 +343,4 @@ int iwm_rx_handle_resp(struct iwm_priv *iwm, u8 *buf, unsigned long buf_size, struct iwm_wifi_cmd *cmd); void iwm_rx_free(struct iwm_priv *iwm); -/* RF Kill API */ -int iwm_rfkill_init(struct iwm_priv *iwm); -void iwm_rfkill_exit(struct iwm_priv *iwm); - #endif diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c index eec7201..68e2c3b 100644 --- a/drivers/net/wireless/iwmc3200wifi/netdev.c +++ b/drivers/net/wireless/iwmc3200wifi/netdev.c @@ -136,17 +136,8 @@ void *iwm_if_alloc(int sizeof_bus, struct device *dev, wdev->netdev = ndev; - ret = iwm_rfkill_init(iwm); - if (ret) { - dev_err(dev, "Failed to init rfkill\n"); - goto out_rfkill; - } - return iwm; - out_rfkill: - unregister_netdev(ndev); - out_ndev: free_netdev(ndev); @@ -162,7 +153,6 @@ void iwm_if_free(struct iwm_priv *iwm) if (!iwm_to_ndev(iwm)) return; - iwm_rfkill_exit(iwm); unregister_netdev(iwm_to_ndev(iwm)); free_netdev(iwm_to_ndev(iwm)); iwm_wdev_free(iwm); diff --git a/drivers/net/wireless/iwmc3200wifi/rfkill.c b/drivers/net/wireless/iwmc3200wifi/rfkill.c deleted file mode 100644 index 8ee2c3c..0000000 --- a/drivers/net/wireless/iwmc3200wifi/rfkill.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Intel Wireless Multicomm 3200 WiFi driver - * - * Copyright (C) 2009 Intel Corporation - * Samuel Ortiz - * Zhu Yi - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - */ - -#include - -#include "iwm.h" - -static int iwm_rfkill_set_block(void *data, bool blocked) -{ - struct iwm_priv *iwm = data; - - if (!blocked) { - if (test_bit(IWM_RADIO_RFKILL_HW, &iwm->radio)) - return -EBUSY; - - if (test_and_clear_bit(IWM_RADIO_RFKILL_SW, &iwm->radio) && - (iwm_to_ndev(iwm)->flags & IFF_UP)) - return iwm_up(iwm); - } else { - if (!test_and_set_bit(IWM_RADIO_RFKILL_SW, &iwm->radio)) - return iwm_down(iwm); - } - - return 0; -} - -static const struct rfkill_ops iwm_rfkill_ops = { - .set_block = iwm_rfkill_set_block, -}; - -int iwm_rfkill_init(struct iwm_priv *iwm) -{ - int ret; - - iwm->rfkill = rfkill_alloc(KBUILD_MODNAME, - iwm_to_dev(iwm), - RFKILL_TYPE_WLAN, - &iwm_rfkill_ops, iwm); - if (!iwm->rfkill) { - IWM_ERR(iwm, "Unable to allocate rfkill device\n"); - return -ENOMEM; - } - - ret = rfkill_register(iwm->rfkill); - if (ret) { - IWM_ERR(iwm, "Failed to register rfkill device\n"); - goto fail; - } - - return 0; - fail: - rfkill_destroy(iwm->rfkill); - return ret; -} - -void iwm_rfkill_exit(struct iwm_priv *iwm) -{ - if (iwm->rfkill) { - rfkill_unregister(iwm->rfkill); - rfkill_destroy(iwm->rfkill); - } - iwm->rfkill = NULL; -} -- cgit v0.10.2 From 581f725ccd7e697074aa057fa86bf99b54052c95 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Tue, 2 Jun 2009 19:28:55 +0530 Subject: ath9k: Fix write callback of 'debug' which configures debug mask Handle error condition on copy_from_user() properly and make sure a NUL terminated char[] is sent to strict_strtoul() for proper conversion. Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index a42d631..6d20725 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -49,8 +49,9 @@ static ssize_t read_file_debug(struct file *file, char __user *user_buf, { struct ath_softc *sc = file->private_data; char buf[32]; - unsigned int len = 0; - len += snprintf(buf, sizeof(buf), "0x%08x\n", sc->debug.debug_mask); + unsigned int len; + + len = snprintf(buf, sizeof(buf), "0x%08x\n", sc->debug.debug_mask); return simple_read_from_buffer(user_buf, count, ppos, buf, len); } @@ -60,12 +61,17 @@ static ssize_t write_file_debug(struct file *file, const char __user *user_buf, struct ath_softc *sc = file->private_data; unsigned long mask; char buf[32]; - if (copy_from_user(buf, user_buf, (sizeof(buf) - 1) < count ? - (sizeof(buf) - 1) : count)) - return 0; - buf[sizeof(buf)-1] = 0; - if (strict_strtoul(buf, 0, &mask) == 0) - sc->debug.debug_mask = mask; + ssize_t len; + + len = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, len)) + return -EINVAL; + + buf[len] = '\0'; + if (strict_strtoul(buf, 0, &mask)) + return -EINVAL; + + sc->debug.debug_mask = mask; return count; } -- cgit v0.10.2 From e03e5ffd8d3327d23d76be5d63cfbbb537b1af59 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 2 Jun 2009 16:30:56 -0400 Subject: ath: make regulatory parsing more verbose on debug This should help when reviewing issues regarding regulatory domain on ath5k/ath9k/ar9170. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index 7a89f9f..eef370bd 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -366,11 +366,17 @@ static bool ath_regd_is_eeprom_valid(struct ath_regulatory *reg) if (rd & COUNTRY_ERD_FLAG) { /* EEPROM value is a country code */ u16 cc = rd & ~COUNTRY_ERD_FLAG; + printk(KERN_DEBUG + "ath: EEPROM indicates we should expect " + "a country code\n"); for (i = 0; i < ARRAY_SIZE(allCountries); i++) if (allCountries[i].countryCode == cc) return true; } else { /* EEPROM value is a regpair value */ + if (rd != CTRY_DEFAULT) + printk(KERN_DEBUG "ath: EEPROM indicates we " + "should expect a direct regpair map\n"); for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++) if (regDomainPairs[i].regDmnEnum == rd) return true; @@ -477,6 +483,11 @@ ath_regd_init(struct ath_regulatory *reg, struct country_code_to_enum_rd *country = NULL; u16 regdmn; + if (!reg) + return -EINVAL; + + printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd); + if (!ath_regd_is_eeprom_valid(reg)) { printk(KERN_ERR "ath: Invalid EEPROM contents\n"); return -EINVAL; @@ -486,20 +497,30 @@ ath_regd_init(struct ath_regulatory *reg, reg->country_code = ath_regd_get_default_country(regdmn); if (reg->country_code == CTRY_DEFAULT && - regdmn == CTRY_DEFAULT) + regdmn == CTRY_DEFAULT) { + printk(KERN_DEBUG "ath: EEPROM indicates default " + "country code should be used\n"); reg->country_code = CTRY_UNITED_STATES; + } if (reg->country_code == CTRY_DEFAULT) { country = NULL; } else { + printk(KERN_DEBUG "ath: doing EEPROM country->regdmn " + "map search\n"); country = ath_regd_find_country(reg->country_code); if (country == NULL) { printk(KERN_DEBUG - "ath: Country is NULL!!!!, cc= %d\n", + "ath: no valid country maps found for " + "country code: 0x%0x\n", reg->country_code); return -EINVAL; - } else + } else { regdmn = country->regDmnEnum; + printk(KERN_DEBUG "ath: country maps to " + "regdmn code: 0x%0x\n", + regdmn); + } } reg->regpair = ath_get_regpair(regdmn); @@ -523,7 +544,7 @@ ath_regd_init(struct ath_regulatory *reg, printk(KERN_DEBUG "ath: Country alpha2 being used: %c%c\n", reg->alpha2[0], reg->alpha2[1]); - printk(KERN_DEBUG "ath: Regpair detected: 0x%0x\n", + printk(KERN_DEBUG "ath: Regpair used: 0x%0x\n", reg->regpair->regDmnEnum); ath_regd_init_wiphy(reg, wiphy, reg_notifier); -- cgit v0.10.2 From 60fd2b67014440091770ac5738301c7fa4c4159c Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 2 Jun 2009 16:31:10 -0400 Subject: cfg80211: make ieee80211_get_mesh_hdrlen() static Fixes spares warning: net/wireless/util.c:261:5: warning: symbol 'ieee80211_get_mesh_hdrlen' was not declared. Should it be static? Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/net/wireless/util.c b/net/wireless/util.c index 5be9ed7..2555069 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -258,7 +258,7 @@ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb) } EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb); -int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) +static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) { int ae = meshhdr->flags & MESH_FLAGS_AE; /* 7.1.3.5a.2 */ -- cgit v0.10.2 From 7e189a12c246f55fe087efe345fe5f4cbe0be545 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 2 Jun 2009 18:38:14 -0400 Subject: mac80211: extend sta kdoc - explain when they are added Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index d5611d8..a360bce 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -44,6 +44,15 @@ * When the insertion fails (sta_info_insert()) returns non-zero), the * structure will have been freed by sta_info_insert()! * + * sta entries are added by mac80211 when you establish a link with a + * peer. This means different things for the different type of interfaces + * we support. For a regular station this mean we add the AP sta when we + * receive an assocation response from the AP. For IBSS this occurs when + * we receive a probe response or a beacon from target IBSS network. For + * WDS we add the sta for the peer imediately upon device open. When using + * AP mode we add stations for each respective station upon request from + * userspace through nl80211. + * * Because there are debugfs entries for each station, and adding those * must be able to sleep, it is also possible to "pin" a station entry, * that means it can be removed from the hash table but not be freed. -- cgit v0.10.2 From 894df1cbc376310163d41c50c891db41296056bf Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 2 Jun 2009 15:43:25 -0700 Subject: mac80211: removed unused variable in ieee80211_tx() Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index a910148..1436f74 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1238,7 +1238,6 @@ static void ieee80211_tx(struct net_device *dev, struct sk_buff *skb, bool txpending) { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct sta_info *sta; struct ieee80211_tx_data tx; ieee80211_tx_result res_prepare; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); @@ -1270,7 +1269,6 @@ static void ieee80211_tx(struct net_device *dev, struct sk_buff *skb, return; } - sta = tx.sta; tx.channel = local->hw.conf.channel; info->band = tx.channel->band; -- cgit v0.10.2 From 72828b1b3cabecfce4321877aa526a2bd21acf0c Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Tue, 2 Jun 2009 23:03:06 -0400 Subject: ath5k: disable beacon interrupt when interface is down When we remove the active interface, there's no need to continue sending beacons; doing so would cause a null pointer deref in ieee80211_beacon_get(). Disable the interrupt in remove_interface and add a WARN_ON(!vif) in case there are other instances lurking. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index ab2048b..85a00db 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2070,6 +2070,13 @@ err_unmap: return ret; } +static void ath5k_beacon_disable(struct ath5k_softc *sc) +{ + sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); + ath5k_hw_set_imr(sc->ah, sc->imask); + ath5k_hw_stop_tx_dma(sc->ah, sc->bhalq); +} + /* * Transmit a beacon frame at SWBA. Dynamic updates to the * frame contents are done as needed and the slot time is @@ -2757,6 +2764,7 @@ ath5k_remove_interface(struct ieee80211_hw *hw, goto end; ath5k_hw_set_lladdr(sc->ah, mac); + ath5k_beacon_disable(sc); sc->vif = NULL; end: mutex_unlock(&sc->lock); @@ -3060,7 +3068,14 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { int ret; struct ath5k_softc *sc = hw->priv; - struct sk_buff *skb = ieee80211_beacon_get(hw, vif); + struct sk_buff *skb; + + if (WARN_ON(!vif)) { + ret = -EINVAL; + goto out; + } + + skb = ieee80211_beacon_get(hw, vif); if (!skb) { ret = -ENOMEM; -- cgit v0.10.2 From 2ec2c68c11af95075f29e370970eb97c89234e2e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 3 Jun 2009 09:55:29 +0200 Subject: rfkill: always init poll delayed work The rfkill core didn't initialise the poll delayed work because it assumed that polling was always done by specifying the poll function. cfg80211, however, would like to start polling only later, which is a valid use case and easy to support, so change rfkill to always initialise the poll delayed work and thus allow starting polling by calling the rfkill_resume_polling() function after registration. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/rfkill/core.c b/net/rfkill/core.c index 91e9168..11b7314 100644 --- a/net/rfkill/core.c +++ b/net/rfkill/core.c @@ -909,16 +909,15 @@ int __must_check rfkill_register(struct rfkill *rfkill) rfkill->registered = true; - if (rfkill->ops->poll) { - INIT_DELAYED_WORK(&rfkill->poll_work, rfkill_poll); - schedule_delayed_work(&rfkill->poll_work, - round_jiffies_relative(POLL_INTERVAL)); - } - + INIT_DELAYED_WORK(&rfkill->poll_work, rfkill_poll); INIT_WORK(&rfkill->uevent_work, rfkill_uevent_work); - INIT_WORK(&rfkill->sync_work, rfkill_sync_work); + + if (rfkill->ops->poll) + schedule_delayed_work(&rfkill->poll_work, + round_jiffies_relative(POLL_INTERVAL)); schedule_work(&rfkill->sync_work); + rfkill_send_events(rfkill, RFKILL_OP_ADD); mutex_unlock(&rfkill_global_mutex); -- cgit v0.10.2 From f71fea23a27ba8ec53375832aab6a80fc14622e0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 3 Jun 2009 10:17:59 +0200 Subject: rfkill: document /dev/rfkill Add some blurb about /dev/rfkill to the documentation and fix the "transmiter" spelling error. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index de941e3..1b74b5f 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -113,7 +113,7 @@ The following sysfs entries exist for every rfkill device: 0: RFKILL_STATE_SOFT_BLOCKED transmitter is turned off by software 1: RFKILL_STATE_UNBLOCKED - transmiter is (potentially) active + transmitter is (potentially) active 2: RFKILL_STATE_HARD_BLOCKED transmitter is forced off by something outside of the driver's control. @@ -128,3 +128,9 @@ RFKILL_TYPE The contents of these variables corresponds to the "name", "state" and "type" sysfs files explained above. + +An alternative userspace interface exists as a misc device /dev/rfkill, +which allows userspace to obtain and set the state of rfkill devices and +sets of devices. It also notifies userspace about device addition and +removal. The API is a simple read/write API that is defined in +linux/rfkill.h. -- cgit v0.10.2 From 0aa8204b46e0fb155a98074d53f8b31ca04269b2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 3 Jun 2009 18:30:31 +0200 Subject: cfg80211: fix Kconfig for users of cfg80211 * iwm doesn't depend on cfg80211 or wireless extensions * rndis wlan selects cfg80211 - needs to depend * mac80211 selects cfg80211 - needs to depend Signed-off-by: Johannes Berg Acked-by: Randy Dunlap Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 8673241..daf4c80 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -333,11 +333,11 @@ config USB_ZD1201 config USB_NET_RNDIS_WLAN tristate "Wireless RNDIS USB support" depends on USB && WLAN_80211 && EXPERIMENTAL + depends on CFG80211 select USB_USBNET select USB_NET_CDCETHER select USB_NET_RNDIS_HOST select WIRELESS_EXT - select CFG80211 ---help--- This is a driver for wireless RNDIS devices. These are USB based adapters found in devices such as: diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig index a907aa9..1eccb6d 100644 --- a/drivers/net/wireless/iwmc3200wifi/Kconfig +++ b/drivers/net/wireless/iwmc3200wifi/Kconfig @@ -1,8 +1,8 @@ config IWM tristate "Intel Wireless Multicomm 3200 WiFi driver" depends on MMC && WLAN_80211 && EXPERIMENTAL + depends on CFG80211 select WIRELESS_EXT - select CFG80211 select FW_LOADER config IWM_DEBUG diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 9cbf545..ba2643a 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -1,16 +1,19 @@ config MAC80211 tristate "Generic IEEE 802.11 Networking Stack (mac80211)" + depends on CFG80211 select CRYPTO select CRYPTO_ECB select CRYPTO_ARC4 select CRYPTO_AES select CRC32 select WIRELESS_EXT - select CFG80211 ---help--- This option enables the hardware independent IEEE 802.11 networking stack. +comment "CFG80211 needs to be enabled for MAC80211" + depends on CFG80211=n + config MAC80211_DEFAULT_PS bool "enable powersave by default" depends on MAC80211 -- cgit v0.10.2 From c587de0b8d6e194f7a1719fc6af8a81b4e8916d2 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 3 Jun 2009 11:44:07 -0700 Subject: iwlwifi: unify station management This patch unifies 3945 and AGN station management It also removes useless struct iwl_station_mgmt ops and cleanups a bit the interface Signed-off-by: Tomas Winkler Tested-by: Abhijeet Kolekar Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index 814afaf..5eb538d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -38,6 +38,7 @@ #include "iwl-commands.h" #include "iwl-3945.h" +#include "iwl-sta.h" #define RS_NAME "iwl-3945-rs" @@ -714,13 +715,13 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && !rs_sta->ibss_sta_added) { - u8 sta_id = iwl3945_hw_find_station(priv, hdr->addr1); + u8 sta_id = iwl_find_station(priv, hdr->addr1); if (sta_id == IWL_INVALID_STATION) { IWL_DEBUG_RATE(priv, "LQ: ADD station %pm\n", hdr->addr1); - sta_id = iwl3945_add_station(priv, - hdr->addr1, 0, CMD_ASYNC, NULL); + sta_id = iwl_add_station(priv, hdr->addr1, false, + CMD_ASYNC, NULL); } if (sta_id != IWL_INVALID_STATION) rs_sta->ibss_sta_added = 1; @@ -975,7 +976,7 @@ void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id) rcu_read_lock(); - sta = ieee80211_find_sta(hw, priv->stations_39[sta_id].sta.sta.addr); + sta = ieee80211_find_sta(hw, priv->stations[sta_id].sta.sta.addr); if (!sta) { rcu_read_unlock(); return; diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index fd65e1c3..46288e7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -769,35 +769,6 @@ void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) return ; } -u8 iwl3945_hw_find_station(struct iwl_priv *priv, const u8 *addr) -{ - int i, start = IWL_AP_ID; - int ret = IWL_INVALID_STATION; - unsigned long flags; - - if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) || - (priv->iw_mode == NL80211_IFTYPE_AP)) - start = IWL_STA_ID; - - if (is_broadcast_ether_addr(addr)) - return priv->hw_params.bcast_sta_id; - - spin_lock_irqsave(&priv->sta_lock, flags); - for (i = start; i < priv->hw_params.max_stations; i++) - if ((priv->stations_39[i].used) && - (!compare_ether_addr - (priv->stations_39[i].sta.sta.addr, addr))) { - ret = i; - goto out; - } - - IWL_DEBUG_INFO(priv, "can not find STA %pM (total %d)\n", - addr, priv->num_stations); - out: - spin_unlock_irqrestore(&priv->sta_lock, flags); - return ret; -} - /** * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD: * @@ -875,13 +846,13 @@ void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv, struct iwl_cmd *cmd, u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate, u8 flags) { unsigned long flags_spin; - struct iwl3945_station_entry *station; + struct iwl_station_entry *station; if (sta_id == IWL_INVALID_STATION) return IWL_INVALID_STATION; spin_lock_irqsave(&priv->sta_lock, flags_spin); - station = &priv->stations_39[sta_id]; + station = &priv->stations[sta_id]; station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK; station->sta.rate_n_flags = cpu_to_le16(tx_rate); @@ -889,8 +860,7 @@ u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate, u8 flags) spin_unlock_irqrestore(&priv->sta_lock, flags_spin); - iwl_send_add_sta(priv, - (struct iwl_addsta_cmd *)&station->sta, flags); + iwl_send_add_sta(priv, &station->sta, flags); IWL_DEBUG_RATE(priv, "SCALE sync station %d to rate %d\n", sta_id, tx_rate); return sta_id; @@ -2029,7 +1999,7 @@ static int iwl3945_commit_rxon(struct iwl_priv *priv) memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); /* If we issue a new RXON command which required a tune then we must * send a new TXPOWER command or we won't be able to Tx any frames */ @@ -2040,7 +2010,7 @@ static int iwl3945_commit_rxon(struct iwl_priv *priv) } /* Add the broadcast address so we can send broadcast frames */ - if (priv->cfg->ops->smgmt->add_station(priv, iwl_bcast_addr, 0, 0, NULL) == + if (iwl_add_station(priv, iwl_bcast_addr, false, CMD_SYNC, NULL) == IWL_INVALID_STATION) { IWL_ERR(priv, "Error adding BROADCAST address for transmit.\n"); return -EIO; @@ -2050,9 +2020,8 @@ static int iwl3945_commit_rxon(struct iwl_priv *priv) * add the IWL_AP_ID to the station rate table */ if (iwl_is_associated(priv) && (priv->iw_mode == NL80211_IFTYPE_STATION)) - if (priv->cfg->ops->smgmt->add_station(priv, - priv->active_rxon.bssid_addr, 1, 0, NULL) - == IWL_INVALID_STATION) { + if (iwl_add_station(priv, priv->active_rxon.bssid_addr, + true, CMD_SYNC, NULL) == IWL_INVALID_STATION) { IWL_ERR(priv, "Error adding AP address for transmit\n"); return -EIO; } @@ -2466,13 +2435,25 @@ static u16 iwl3945_get_hcmd_size(u8 cmd_id, u16 len) } } + static u16 iwl3945_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data) { - u16 size = (u16)sizeof(struct iwl3945_addsta_cmd); - memcpy(data, cmd, size); - return size; + struct iwl3945_addsta_cmd *addsta = (struct iwl3945_addsta_cmd *)data; + addsta->mode = cmd->mode; + memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify)); + memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo)); + addsta->station_flags = cmd->station_flags; + addsta->station_flags_msk = cmd->station_flags_msk; + addsta->tid_disable_tx = cpu_to_le16(0); + addsta->rate_n_flags = cmd->rate_n_flags; + addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid; + addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid; + addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn; + + return (u16)sizeof(struct iwl3945_addsta_cmd); } + /** * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table */ @@ -2842,15 +2823,6 @@ static struct iwl_lib_ops iwl3945_lib = { .config_ap = iwl3945_config_ap, }; -static struct iwl_station_mgmt_ops iwl3945_station_mgmt = { - .add_station = iwl3945_add_station, -#if 0 - .remove_station = iwl3945_remove_station, -#endif - .find_station = iwl3945_hw_find_station, - .clear_station_table = iwl3945_clear_stations_table, -}; - static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = { .get_hcmd_size = iwl3945_get_hcmd_size, .build_addsta_hcmd = iwl3945_build_addsta_hcmd, @@ -2860,7 +2832,6 @@ static struct iwl_ops iwl3945_ops = { .lib = &iwl3945_lib, .hcmd = &iwl3945_hcmd, .utils = &iwl3945_hcmd_utils, - .smgmt = &iwl3945_station_mgmt, }; static struct iwl_cfg iwl3945_bg_cfg = { diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index da87528..4d8a325 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -202,12 +202,6 @@ struct iwl3945_ibss_seq { * for use by iwl-*.c * *****************************************************************************/ -struct iwl3945_addsta_cmd; -extern int iwl3945_send_add_station(struct iwl_priv *priv, - struct iwl3945_addsta_cmd *sta, u8 flags); -extern u8 iwl3945_add_station(struct iwl_priv *priv, const u8 *bssid, - int is_ap, u8 flags, struct ieee80211_sta_ht_cap *ht_info); -extern void iwl3945_clear_stations_table(struct iwl_priv *priv); extern int iwl3945_power_init_handle(struct iwl_priv *priv); extern int iwl3945_eeprom_init(struct iwl_priv *priv); extern int iwl3945_calc_db_from_ratio(int sig_ratio); diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index a0b2941..8f3d4bc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2221,13 +2221,6 @@ static void iwl4965_cancel_deferred_work(struct iwl_priv *priv) cancel_work_sync(&priv->txpower_work); } -static struct iwl_station_mgmt_ops iwl4965_station_mgmt = { - .add_station = iwl_add_station_flags, - .remove_station = iwl_remove_station, - .find_station = iwl_find_station, - .clear_station_table = iwl_clear_stations_table, -}; - static struct iwl_hcmd_ops iwl4965_hcmd = { .rxon_assoc = iwl4965_send_rxon_assoc, .commit_rxon = iwl_commit_rxon, @@ -2297,7 +2290,6 @@ static struct iwl_ops iwl4965_ops = { .lib = &iwl4965_lib, .hcmd = &iwl4965_hcmd, .utils = &iwl4965_hcmd_utils, - .smgmt = &iwl4965_station_mgmt, }; struct iwl_cfg iwl4965_agn_cfg = { diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index ab29aab..b3c648c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -651,7 +651,7 @@ static void iwl5000_init_alive_start(struct iwl_priv *priv) goto restart; } - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); ret = priv->cfg->ops->lib->alive_notify(priv); if (ret) { IWL_WARN(priv, @@ -1049,7 +1049,10 @@ static int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id, u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data) { u16 size = (u16)sizeof(struct iwl_addsta_cmd); - memcpy(data, cmd, size); + struct iwl_addsta_cmd *addsta = (struct iwl_addsta_cmd *)data; + memcpy(addsta, cmd, size); + /* resrved in 5000 */ + addsta->rate_n_flags = cpu_to_le16(0); return size; } @@ -1423,13 +1426,6 @@ int iwl5000_calc_rssi(struct iwl_priv *priv, return max_rssi - agc - IWL49_RSSI_OFFSET; } -struct iwl_station_mgmt_ops iwl5000_station_mgmt = { - .add_station = iwl_add_station_flags, - .remove_station = iwl_remove_station, - .find_station = iwl_find_station, - .clear_station_table = iwl_clear_stations_table, -}; - struct iwl_hcmd_ops iwl5000_hcmd = { .rxon_assoc = iwl5000_send_rxon_assoc, .commit_rxon = iwl_commit_rxon, @@ -1549,14 +1545,12 @@ struct iwl_ops iwl5000_ops = { .lib = &iwl5000_lib, .hcmd = &iwl5000_hcmd, .utils = &iwl5000_hcmd_utils, - .smgmt = &iwl5000_station_mgmt, }; static struct iwl_ops iwl5150_ops = { .lib = &iwl5150_lib, .hcmd = &iwl5000_hcmd, .utils = &iwl5000_hcmd_utils, - .smgmt = &iwl5000_station_mgmt, }; struct iwl_mod_params iwl50_mod_params = { diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 7236382..bd438d8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -72,7 +72,6 @@ static struct iwl_ops iwl6000_ops = { .lib = &iwl5000_lib, .hcmd = &iwl5000_hcmd, .utils = &iwl6000_hcmd_utils, - .smgmt = &iwl5000_station_mgmt, }; struct iwl_cfg iwl6000_2ag_cfg = { diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 23a58b0..2cdd191 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -2502,15 +2502,13 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && !lq_sta->ibss_sta_added) { - u8 sta_id = priv->cfg->ops->smgmt->find_station(priv, - hdr->addr1); + u8 sta_id = iwl_find_station(priv, hdr->addr1); if (sta_id == IWL_INVALID_STATION) { IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", hdr->addr1); - sta_id = priv->cfg->ops->smgmt->add_station(priv, - hdr->addr1, 0, - CMD_ASYNC, NULL); + sta_id = iwl_add_station(priv, hdr->addr1, + false, CMD_ASYNC, NULL); } if ((sta_id != IWL_INVALID_STATION)) { lq_sta->lq.sta_id = sta_id; @@ -2598,7 +2596,7 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband, lq_sta->ibss_sta_added = 0; if (priv->iw_mode == NL80211_IFTYPE_AP) { - u8 sta_id = priv->cfg->ops->smgmt->find_station(priv, + u8 sta_id = iwl_find_station(priv, sta->addr); /* for IBSS the call are from tasklet */ @@ -2606,9 +2604,8 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband, if (sta_id == IWL_INVALID_STATION) { IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", sta->addr); - sta_id = priv->cfg->ops->smgmt->add_station(priv, - sta->addr, 0, - CMD_ASYNC, NULL); + sta_id = iwl_add_station(priv, sta->addr, false, + CMD_ASYNC, NULL); } if ((sta_id != IWL_INVALID_STATION)) { lq_sta->lq.sta_id = sta_id; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 0a5507c..e6ecb3f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -188,7 +188,7 @@ int iwl_commit_rxon(struct iwl_priv *priv) memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); } - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); priv->start_calib = 0; @@ -1617,7 +1617,7 @@ static void iwl_alive_start(struct iwl_priv *priv) goto restart; } - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); ret = priv->cfg->ops->lib->alive_notify(priv); if (ret) { IWL_WARN(priv, @@ -1703,7 +1703,7 @@ static void __iwl_down(struct iwl_priv *priv) iwl_leds_unregister(priv); - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); /* Unblock any waiting calls */ wake_up_interruptible_all(&priv->wait_command_queue); @@ -1903,7 +1903,7 @@ static int __iwl_up(struct iwl_priv *priv) for (i = 0; i < MAX_HW_RESTARTS; i++) { - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); /* load bootstrap state machine, * load bootstrap program into processor's memory, @@ -2348,7 +2348,7 @@ static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, return -EOPNOTSUPP; } addr = sta ? sta->addr : iwl_bcast_addr; - sta_id = priv->cfg->ops->smgmt->find_station(priv, addr); + sta_id = iwl_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n", addr); @@ -3121,7 +3121,7 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev) iwl_rx_queue_free(priv, &priv->rxq); iwl_hw_txq_ctx_free(priv); - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); iwl_eeprom_free(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index e581dc3..b3229f2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -1067,7 +1067,7 @@ struct iwl_addsta_cmd { * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ __le16 tid_disable_tx; - __le16 reserved1; + __le16 rate_n_flags; /* 3945 only */ /* TID for which to add block-ack support. * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index ddd2219..51cae4e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1389,7 +1389,7 @@ int iwl_init_drv(struct iwl_priv *priv) mutex_init(&priv->mutex); /* Clear the driver's (not device's) station table */ - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); priv->data_retry_limit = -1; priv->ieee_channels = NULL; @@ -2680,7 +2680,7 @@ int iwl_set_mode(struct iwl_priv *priv, int mode) memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); /* dont commit rxon if rf-kill is on*/ if (!iwl_is_ready_rf(priv)) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 87df1b7..4173a40 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -83,15 +83,6 @@ struct iwl_cmd; #define IWL_SKU_A 0x2 #define IWL_SKU_N 0x8 -struct iwl_station_mgmt_ops { - u8 (*add_station)(struct iwl_priv *priv, const u8 *addr, - int is_ap, u8 flags, struct ieee80211_sta_ht_cap *ht_info); - int (*remove_station)(struct iwl_priv *priv, const u8 *addr, - int is_ap); - u8 (*find_station)(struct iwl_priv *priv, const u8 *addr); - void (*clear_station_table)(struct iwl_priv *priv); -}; - struct iwl_hcmd_ops { int (*rxon_assoc)(struct iwl_priv *priv); int (*commit_rxon)(struct iwl_priv *priv); @@ -183,7 +174,6 @@ struct iwl_ops { const struct iwl_lib_ops *lib; const struct iwl_hcmd_ops *hcmd; const struct iwl_hcmd_utils_ops *utils; - const struct iwl_station_mgmt_ops *smgmt; }; struct iwl_mod_params { diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 2dafc26..28c39cf 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -70,7 +70,6 @@ extern struct iwl_ops iwl5000_ops; extern struct iwl_lib_ops iwl5000_lib; extern struct iwl_hcmd_ops iwl5000_hcmd; extern struct iwl_hcmd_utils_ops iwl5000_hcmd_utils; -extern struct iwl_station_mgmt_ops iwl5000_station_mgmt; /* shared functions from iwl-5000.c */ extern u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len); @@ -290,11 +289,11 @@ struct iwl_frame { #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) enum { - /* CMD_SIZE_NORMAL = 0, */ + CMD_SYNC = 0, + CMD_SIZE_NORMAL = 0, + CMD_NO_SKB = 0, CMD_SIZE_HUGE = (1 << 0), - /* CMD_SYNC = 0, */ CMD_ASYNC = (1 << 1), - /* CMD_NO_SKB = 0, */ CMD_WANT_SKB = (1 << 2), }; @@ -1119,8 +1118,6 @@ struct iwl_priv { struct iwl3945_notif_statistics statistics_39; - struct iwl3945_station_entry stations_39[IWL_STATION_COUNT]; - u32 sta_supp_rates; }; /*iwl_priv */ diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 0eb939c..5ea3bc7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -75,7 +75,7 @@ int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) return IWL_AP_ID; } else { u8 *da = ieee80211_get_DA(hdr); - return priv->cfg->ops->smgmt->find_station(priv, da); + return iwl_find_station(priv, da); } } EXPORT_SYMBOL(iwl_get_ra_sta_id); @@ -86,8 +86,7 @@ static void iwl_sta_ucode_activate(struct iwl_priv *priv, u8 sta_id) spin_lock_irqsave(&priv->sta_lock, flags); - if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE) && - !(priv->stations_39[sta_id].used & IWL_STA_DRIVER_ACTIVE)) + if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE)) IWL_ERR(priv, "ACTIVATE a non DRIVER active station %d\n", sta_id); @@ -228,15 +227,16 @@ static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index, } /** - * iwl_add_station_flags - Add station to tables in driver and device + * iwl_add_station - Add station to tables in driver and device */ -u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap, - u8 flags, struct ieee80211_sta_ht_cap *ht_info) +u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap, u8 flags, + struct ieee80211_sta_ht_cap *ht_info) { - int i; - int sta_id = IWL_INVALID_STATION; struct iwl_station_entry *station; unsigned long flags_spin; + int i; + int sta_id = IWL_INVALID_STATION; + u16 rate; spin_lock_irqsave(&priv->sta_lock, flags_spin); if (is_ap) @@ -288,6 +288,12 @@ u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap, priv->iw_mode != NL80211_IFTYPE_ADHOC) iwl_set_ht_add_station(priv, sta_id, ht_info); + /* 3945 only */ + rate = (priv->band == IEEE80211_BAND_5GHZ) ? + IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP; + /* Turn on both antennas for the station... */ + station->sta.rate_n_flags = cpu_to_le16(rate | RATE_MCS_ANT_AB_MSK); + spin_unlock_irqrestore(&priv->sta_lock, flags_spin); /* Add station to device's station table */ @@ -295,12 +301,12 @@ u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap, return sta_id; } -EXPORT_SYMBOL(iwl_add_station_flags); +EXPORT_SYMBOL(iwl_add_station); static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const char *addr) { unsigned long flags; - u8 sta_id = priv->cfg->ops->smgmt->find_station(priv, addr); + u8 sta_id = iwl_find_station(priv, addr); BUG_ON(sta_id == IWL_INVALID_STATION); @@ -408,7 +414,7 @@ static int iwl_send_remove_station(struct iwl_priv *priv, const u8 *addr, /** * iwl_remove_station - Remove driver's knowledge of station. */ -int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap) +int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, bool is_ap) { int sta_id = IWL_INVALID_STATION; int i, ret = -EINVAL; @@ -767,7 +773,7 @@ void iwl_update_tkip_key(struct iwl_priv *priv, unsigned long flags; int i; - sta_id = priv->cfg->ops->smgmt->find_station(priv, addr); + sta_id = iwl_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n", addr); @@ -946,7 +952,7 @@ EXPORT_SYMBOL(iwl_send_lq_cmd); * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD, * which requires station table entry to exist). */ -static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap) +static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, bool is_ap) { int i, r; struct iwl_link_quality_cmd link_cmd = { @@ -995,7 +1001,7 @@ static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap) * there is only one AP station with id= IWL_AP_ID * NOTE: mutex must be held before calling this function */ -int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap) +int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap) { struct ieee80211_sta *sta; struct ieee80211_sta_ht_cap ht_config; @@ -1020,8 +1026,7 @@ int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap) rcu_read_unlock(); } - sta_id = priv->cfg->ops->smgmt->add_station(priv, addr, is_ap, - 0, cur_ht_config); + sta_id = iwl_add_station(priv, addr, is_ap, CMD_SYNC, cur_ht_config); /* Set up default rate scaling table in device's station table */ iwl_sta_init_lq(priv, addr, is_ap); @@ -1054,7 +1059,7 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) /* If we are an AP, then find the station, or use BCAST */ case NL80211_IFTYPE_AP: - sta_id = priv->cfg->ops->smgmt->find_station(priv, hdr->addr1); + sta_id = iwl_find_station(priv, hdr->addr1); if (sta_id != IWL_INVALID_STATION) return sta_id; return priv->hw_params.bcast_sta_id; @@ -1062,13 +1067,13 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) /* If this frame is going out to an IBSS network, find the station, * or create a new station table entry */ case NL80211_IFTYPE_ADHOC: - sta_id = priv->cfg->ops->smgmt->find_station(priv, hdr->addr1); + sta_id = iwl_find_station(priv, hdr->addr1); if (sta_id != IWL_INVALID_STATION) return sta_id; /* Create new station table entry */ - sta_id = priv->cfg->ops->smgmt->add_station(priv, hdr->addr1, - 0, CMD_ASYNC, NULL); + sta_id = iwl_add_station(priv, hdr->addr1, false, + CMD_ASYNC, NULL); if (sta_id != IWL_INVALID_STATION) return sta_id; @@ -1111,7 +1116,7 @@ int iwl_sta_rx_agg_start(struct iwl_priv *priv, unsigned long flags; int sta_id; - sta_id = priv->cfg->ops->smgmt->find_station(priv, addr); + sta_id = iwl_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) return -ENXIO; @@ -1133,7 +1138,7 @@ int iwl_sta_rx_agg_stop(struct iwl_priv *priv, const u8 *addr, int tid) unsigned long flags; int sta_id; - sta_id = priv->cfg->ops->smgmt->find_station(priv, addr); + sta_id = iwl_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { IWL_ERR(priv, "Invalid station for AGG tid %d\n", tid); return -ENXIO; @@ -1168,7 +1173,7 @@ static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) void iwl_update_ps_mode(struct iwl_priv *priv, u16 ps_bit, u8 *addr) { /* FIXME: need locking over ps_status ??? */ - u8 sta_id = priv->cfg->ops->smgmt->find_station(priv, addr); + u8 sta_id = iwl_find_station(priv, addr); if (sta_id != IWL_INVALID_STATION) { u8 sta_awake = priv->stations[sta_id]. diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h index 59a586b..6deebad 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.h +++ b/drivers/net/wireless/iwlwifi/iwl-sta.h @@ -51,16 +51,15 @@ void iwl_update_tkip_key(struct iwl_priv *priv, struct ieee80211_key_conf *keyconf, const u8 *addr, u32 iv32, u16 *phase1key); -int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap); -int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap); +int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap); +int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, bool is_ap); void iwl_clear_stations_table(struct iwl_priv *priv); int iwl_get_free_ucode_key_index(struct iwl_priv *priv); int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr); int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr); int iwl_send_add_sta(struct iwl_priv *priv, struct iwl_addsta_cmd *sta, u8 flags); -u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, - int is_ap, u8 flags, +u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap, u8 flags, struct ieee80211_sta_ht_cap *ht_info); void iwl_sta_tx_modify_enable_tid(struct iwl_priv *priv, int sta_id, int tid); int iwl_sta_rx_agg_start(struct iwl_priv *priv, diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 5c10b87..745eaae 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -95,144 +95,6 @@ struct iwl_mod_params iwl3945_mod_params = { /* the rest are 0 by default */ }; -/*************** STATION TABLE MANAGEMENT **** - * mac80211 should be examined to determine if sta_info is duplicating - * the functionality provided here - */ - -/**************************************************************/ -#if 0 /* temporary disable till we add real remove station */ -/** - * iwl3945_remove_station - Remove driver's knowledge of station. - * - * NOTE: This does not remove station from device's station table. - */ -static u8 iwl3945_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap) -{ - int index = IWL_INVALID_STATION; - int i; - unsigned long flags; - - spin_lock_irqsave(&priv->sta_lock, flags); - - if (is_ap) - index = IWL_AP_ID; - else if (is_broadcast_ether_addr(addr)) - index = priv->hw_params.bcast_sta_id; - else - for (i = IWL_STA_ID; i < priv->hw_params.max_stations; i++) - if (priv->stations_39[i].used && - !compare_ether_addr(priv->stations_39[i].sta.sta.addr, - addr)) { - index = i; - break; - } - - if (unlikely(index == IWL_INVALID_STATION)) - goto out; - - if (priv->stations_39[index].used) { - priv->stations_39[index].used = 0; - priv->num_stations--; - } - - BUG_ON(priv->num_stations < 0); - -out: - spin_unlock_irqrestore(&priv->sta_lock, flags); - return 0; -} -#endif - -/** - * iwl3945_clear_stations_table - Clear the driver's station table - * - * NOTE: This does not clear or otherwise alter the device's station table. - */ -void iwl3945_clear_stations_table(struct iwl_priv *priv) -{ - unsigned long flags; - - spin_lock_irqsave(&priv->sta_lock, flags); - - priv->num_stations = 0; - memset(priv->stations_39, 0, sizeof(priv->stations_39)); - - spin_unlock_irqrestore(&priv->sta_lock, flags); -} - -/** - * iwl3945_add_station - Add station to station tables in driver and device - */ -u8 iwl3945_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap, u8 flags, struct ieee80211_sta_ht_cap *ht_info) -{ - int i; - int index = IWL_INVALID_STATION; - struct iwl3945_station_entry *station; - unsigned long flags_spin; - u8 rate; - - spin_lock_irqsave(&priv->sta_lock, flags_spin); - if (is_ap) - index = IWL_AP_ID; - else if (is_broadcast_ether_addr(addr)) - index = priv->hw_params.bcast_sta_id; - else - for (i = IWL_STA_ID; i < priv->hw_params.max_stations; i++) { - if (!compare_ether_addr(priv->stations_39[i].sta.sta.addr, - addr)) { - index = i; - break; - } - - if (!priv->stations_39[i].used && - index == IWL_INVALID_STATION) - index = i; - } - - /* These two conditions has the same outcome but keep them separate - since they have different meaning */ - if (unlikely(index == IWL_INVALID_STATION)) { - spin_unlock_irqrestore(&priv->sta_lock, flags_spin); - return index; - } - - if (priv->stations_39[index].used && - !compare_ether_addr(priv->stations_39[index].sta.sta.addr, addr)) { - spin_unlock_irqrestore(&priv->sta_lock, flags_spin); - return index; - } - - IWL_DEBUG_ASSOC(priv, "Add STA ID %d: %pM\n", index, addr); - station = &priv->stations_39[index]; - station->used = 1; - priv->num_stations++; - - /* Set up the REPLY_ADD_STA command to send to device */ - memset(&station->sta, 0, sizeof(struct iwl3945_addsta_cmd)); - memcpy(station->sta.sta.addr, addr, ETH_ALEN); - station->sta.mode = 0; - station->sta.sta.sta_id = index; - station->sta.station_flags = 0; - - if (priv->band == IEEE80211_BAND_5GHZ) - rate = IWL_RATE_6M_PLCP; - else - rate = IWL_RATE_1M_PLCP; - - /* Turn on both antennas for the station... */ - station->sta.rate_n_flags = - iwl3945_hw_set_rate_n_flags(rate, RATE_MCS_ANT_AB_MSK); - - spin_unlock_irqrestore(&priv->sta_lock, flags_spin); - - /* Add station to device's station table */ - iwl_send_add_sta(priv, - (struct iwl_addsta_cmd *)&station->sta, flags); - return index; - -} - /** * iwl3945_get_antenna_flags - Get antenna flags for RXON command * @priv: eeprom and antenna fields are used to determine antenna flags @@ -289,32 +151,31 @@ static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv, key_flags &= ~STA_KEY_FLG_INVALID; spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations_39[sta_id].keyinfo.alg = keyconf->alg; - priv->stations_39[sta_id].keyinfo.keylen = keyconf->keylen; - memcpy(priv->stations_39[sta_id].keyinfo.key, keyconf->key, + priv->stations[sta_id].keyinfo.alg = keyconf->alg; + priv->stations[sta_id].keyinfo.keylen = keyconf->keylen; + memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen); - memcpy(priv->stations_39[sta_id].sta.key.key, keyconf->key, + memcpy(priv->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen); - if ((priv->stations_39[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK) + if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) - priv->stations_39[sta_id].sta.key.key_offset = + priv->stations[sta_id].sta.key.key_offset = iwl_get_free_ucode_key_index(priv); /* else, we are overriding an existing key => no need to allocated room * in uCode. */ - WARN(priv->stations_39[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, "no space for a new key"); - priv->stations_39[sta_id].sta.key.key_flags = key_flags; - priv->stations_39[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; - priv->stations_39[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + priv->stations[sta_id].sta.key.key_flags = key_flags; + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; IWL_DEBUG_INFO(priv, "hwcrypto: modify ucode station key info\n"); - ret = iwl_send_add_sta(priv, - (struct iwl_addsta_cmd *)&priv->stations_39[sta_id].sta, CMD_ASYNC); + ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); spin_unlock_irqrestore(&priv->sta_lock, flags); @@ -340,17 +201,16 @@ static int iwl3945_clear_sta_key_info(struct iwl_priv *priv, u8 sta_id) unsigned long flags; spin_lock_irqsave(&priv->sta_lock, flags); - memset(&priv->stations_39[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key)); - memset(&priv->stations_39[sta_id].sta.key, 0, + memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key)); + memset(&priv->stations[sta_id].sta.key, 0, sizeof(struct iwl4965_keyinfo)); - priv->stations_39[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC; - priv->stations_39[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; - priv->stations_39[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC; + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; spin_unlock_irqrestore(&priv->sta_lock, flags); IWL_DEBUG_INFO(priv, "hwcrypto: clear ucode station key info\n"); - iwl_send_add_sta(priv, - (struct iwl_addsta_cmd *)&priv->stations_39[sta_id].sta, 0); + iwl_send_add_sta(priv, &priv->stations[sta_id].sta, 0); return 0; } @@ -578,7 +438,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv, int sta_id) { struct iwl3945_tx_cmd *tx = (struct iwl3945_tx_cmd *)cmd->cmd.payload; - struct iwl_hw_key *keyinfo = &priv->stations_39[sta_id].keyinfo; + struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo; switch (keyinfo->alg) { case ALG_CCMP: @@ -753,7 +613,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) if (ieee80211_is_data_qos(fc)) { qc = ieee80211_get_qos_ctl(hdr); tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; - seq_number = priv->stations_39[sta_id].tid[tid].seq_number & + seq_number = priv->stations[sta_id].tid[tid].seq_number & IEEE80211_SCTL_SEQ; hdr->seq_ctrl = cpu_to_le16(seq_number) | (hdr->seq_ctrl & @@ -813,7 +673,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) if (!ieee80211_has_morefrags(hdr->frame_control)) { txq->need_update = 1; if (qc) - priv->stations_39[sta_id].tid[tid].seq_number = seq_number; + priv->stations[sta_id].tid[tid].seq_number = seq_number; } else { wait_write_ptr = 1; txq->need_update = 0; @@ -2589,7 +2449,7 @@ static void iwl3945_alive_start(struct iwl_priv *priv) goto restart; } - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); rfkill = iwl_read_prph(priv, APMG_RFKILL_REG); IWL_DEBUG_INFO(priv, "RFKILL status: 0x%x\n", rfkill); @@ -2681,7 +2541,7 @@ static void __iwl3945_down(struct iwl_priv *priv) set_bit(STATUS_EXIT_PENDING, &priv->status); iwl3945_led_unregister(priv); - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); /* Unblock any waiting calls */ wake_up_interruptible_all(&priv->wait_command_queue); @@ -2833,7 +2693,7 @@ static int __iwl3945_up(struct iwl_priv *priv) for (i = 0; i < MAX_HW_RESTARTS; i++) { - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); /* load bootstrap state machine, * load bootstrap program into processor's memory, @@ -3247,7 +3107,7 @@ void iwl3945_post_associate(struct iwl_priv *priv) case NL80211_IFTYPE_ADHOC: priv->assoc_id = 1; - priv->cfg->ops->smgmt->add_station(priv, priv->bssid, 0, 0, NULL); + iwl_add_station(priv, priv->bssid, 0, CMD_SYNC, NULL); iwl3945_sync_sta(priv, IWL_STA_ID, (priv->band == IEEE80211_BAND_5GHZ) ? IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP, @@ -3438,7 +3298,7 @@ void iwl3945_config_ap(struct iwl_priv *priv) /* restore RXON assoc */ priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; iwlcore_commit_rxon(priv); - priv->cfg->ops->smgmt->add_station(priv, iwl_bcast_addr, 0, 0, NULL); + iwl_add_station(priv, iwl_bcast_addr, 0, CMD_SYNC, NULL); } iwl3945_send_beacon_cmd(priv); @@ -3469,7 +3329,7 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, static_key = !iwl_is_associated(priv); if (!static_key) { - sta_id = priv->cfg->ops->smgmt->find_station(priv, addr); + sta_id = iwl_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n", addr); @@ -4044,7 +3904,7 @@ static int iwl3945_init_drv(struct iwl_priv *priv) mutex_init(&priv->mutex); /* Clear the driver's (not device's) station table */ - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); priv->data_retry_limit = -1; priv->ieee_channels = NULL; @@ -4407,7 +4267,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) iwl3945_hw_txq_ctx_free(priv); iwl3945_unset_hw_params(priv); - priv->cfg->ops->smgmt->clear_station_table(priv); + iwl_clear_stations_table(priv); /*netif_stop_queue(dev); */ flush_workqueue(priv->workqueue); -- cgit v0.10.2 From d14d44407b9f06e3cf967fcef28ccb780caf0583 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Wed, 3 Jun 2009 11:44:08 -0700 Subject: iwl3945: port allow skb allocation in tasklet patch Port "iwlcore: Allow skb allocation from tasklet." to 3945 If RX queue becomes empty then we need to restock the queue from tasklet to prevent ucode from starving. A caller to iwl_rx_allocate will decide if allocated buffer should come from GFP_ATOMIC or GFP_KERNEL. Signed-off-by: Abhijeet Kolekar Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 745eaae..92fa1a3 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1176,7 +1176,7 @@ static int iwl3945_rx_queue_restock(struct iwl_priv *priv) /* If we've added more space for the firmware to place data, tell it. * Increment device's write pointer in multiples of 8. */ - if ((write != (rxq->write & ~0x7)) + if ((rxq->write_actual != (rxq->write & ~0x7)) || (abs(rxq->write - rxq->read) > 7)) { spin_lock_irqsave(&rxq->lock, flags); rxq->need_update = 1; @@ -1197,7 +1197,7 @@ static int iwl3945_rx_queue_restock(struct iwl_priv *priv) * Also restock the Rx queue via iwl3945_rx_queue_restock. * This is called as a scheduled work item (except for during initialization) */ -static void iwl3945_rx_allocate(struct iwl_priv *priv) +static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority) { struct iwl_rx_queue *rxq = &priv->rxq; struct list_head *element; @@ -1220,7 +1220,7 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv) /* Alloc a new receive buffer */ rxb->skb = alloc_skb(priv->hw_params.rx_buf_size, - GFP_KERNEL); + priority); if (!rxb->skb) { if (net_ratelimit()) IWL_CRIT(priv, ": Can not allocate SKB buffers\n"); @@ -1279,6 +1279,7 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) * not restocked the Rx queue with fresh buffers */ rxq->read = rxq->write = 0; rxq->free_count = 0; + rxq->write_actual = 0; spin_unlock_irqrestore(&rxq->lock, flags); } @@ -1287,13 +1288,21 @@ void iwl3945_rx_replenish(void *data) struct iwl_priv *priv = data; unsigned long flags; - iwl3945_rx_allocate(priv); + iwl3945_rx_allocate(priv, GFP_KERNEL); spin_lock_irqsave(&priv->lock, flags); iwl3945_rx_queue_restock(priv); spin_unlock_irqrestore(&priv->lock, flags); } +static void iwl3945_rx_replenish_now(struct iwl_priv *priv) +{ + iwl3945_rx_allocate(priv, GFP_ATOMIC); + + iwl3945_rx_queue_restock(priv); +} + + /* Assumes that the skb field of the buffers in 'pool' is kept accurate. * If an SKB has been detached, the POOL needs to have its SKB set to NULL * This free routine walks the list of POOL entries and if SKB is set to @@ -1416,13 +1425,19 @@ static void iwl3945_rx_handle(struct iwl_priv *priv) unsigned long flags; u8 fill_rx = 0; u32 count = 8; + int total_empty = 0; /* uCode's read index (stored in shared DRAM) indicates the last Rx * buffer that the driver may process (last buffer filled by ucode). */ r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; i = rxq->read; - if (iwl_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2)) + /* calculate total frames need to be restock after handling RX */ + total_empty = r - priv->rxq.write_actual; + if (total_empty < 0) + total_empty += RX_QUEUE_SIZE; + + if (total_empty > (RX_QUEUE_SIZE / 2)) fill_rx = 1; /* Rx interrupt, but nothing sent from uCode */ if (i == r) @@ -1499,7 +1514,7 @@ static void iwl3945_rx_handle(struct iwl_priv *priv) count++; if (count >= 8) { priv->rxq.read = i; - iwl3945_rx_queue_restock(priv); + iwl3945_rx_replenish_now(priv); count = 0; } } @@ -1507,7 +1522,10 @@ static void iwl3945_rx_handle(struct iwl_priv *priv) /* Backtrack one entry */ priv->rxq.read = i; - iwl3945_rx_queue_restock(priv); + if (fill_rx) + iwl3945_rx_replenish_now(priv); + else + iwl3945_rx_queue_restock(priv); } /* call this function to flush any scheduled tasklet */ -- cgit v0.10.2 From ee5006a19c9e040d715efb75a6f4fa78764869ce Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Wed, 3 Jun 2009 11:44:09 -0700 Subject: iwl3945/iwlwifi: fix led bug when SW rfkill Patch fixes the bug at http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1903 when SW rfkill is invoked by 'iwconfig txpower off', the existing connection disassociates and led off command is sent to the device which returns error as rfkill is 'true'. Patch fixes this by just avoiding sending the led off/on command when disassociated. The main purpose of the led_disassociate callback is to start or stop the blinking. There are three states in led 1) Always on when radio is on 2) Always off when radio is off 3) blink when associated and if there is some traffic. In this callback 'allow_blinking' needs to be set false when associated, as LED will be always on. Signed-off-by: Abhijeet Kolekar Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c index bd7e520..225e5f8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c @@ -167,10 +167,6 @@ static int iwl3945_led_disassociate(struct iwl_priv *priv, int led_id) IWL_DEBUG_LED(priv, "Disassociated\n"); priv->allow_blinking = 0; - if (iwl_is_rfkill(priv)) - iwl3945_led_off(priv, led_id); - else - iwl3945_led_on(priv, led_id); return 0; } diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c index 19680f7..5e64252 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-led.c @@ -176,10 +176,6 @@ static int iwl_led_associate(struct iwl_priv *priv, int led_id) static int iwl_led_disassociate(struct iwl_priv *priv, int led_id) { priv->allow_blinking = 0; - if (iwl_is_rfkill(priv)) - iwl4965_led_off_reg(priv, led_id); - else - iwl4965_led_on_reg(priv, led_id); return 0; } -- cgit v0.10.2 From 258c44a0c02a7ffbb9555747008d6bf9a3ea58a0 Mon Sep 17 00:00:00 2001 From: Mohamed Abbas Date: Wed, 3 Jun 2009 11:44:10 -0700 Subject: iwlagn: delay ict interrupt. Wait until ucode is loaded and driver receive ALIVE_REPLY then switch to ICT interrupt. This ensures we receive all interrupts indicating successful ucode load. Signed-off-by: Mohamed Abbas Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index e6ecb3f..b77208d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1887,8 +1887,6 @@ static int __iwl_up(struct iwl_priv *priv) /* clear (again), then enable host interrupts */ iwl_write32(priv, CSR_INT, 0xFFFFFFFF); - /* enable dram interrupt */ - iwl_reset_ict(priv); iwl_enable_interrupts(priv); /* really make sure rfkill handshake bits are cleared */ @@ -1962,6 +1960,9 @@ static void iwl_bg_alive_start(struct work_struct *data) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; + /* enable dram interrupt */ + iwl_reset_ict(priv); + mutex_lock(&priv->mutex); iwl_alive_start(priv); mutex_unlock(&priv->mutex); -- cgit v0.10.2 From 13c33a09b3703c2956345482017600434c853889 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Wed, 3 Jun 2009 11:44:11 -0700 Subject: iwlwifi: add value and range define for link quality command Instead of hardcoding the link quality parameters inside the functions, adding #define in iwl-commands.h to shared by different functions. Also include the valid range for number of link quality parameters. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 2cdd191..ff20e504 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -2787,9 +2787,10 @@ static void rs_fill_link_cmd(const struct iwl_priv *priv, repeat_rate--; } - lq_cmd->agg_params.agg_frame_cnt_limit = 64; - lq_cmd->agg_params.agg_dis_start_th = 3; - lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000); + lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_MAX; + lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; + lq_cmd->agg_params.agg_time_limit = + cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); } static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index b3229f2..c87033b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -1913,6 +1913,18 @@ struct iwl_link_qual_general_params { u8 start_rate_index[LINK_QUAL_AC_NUM]; } __attribute__ ((packed)); +#define LINK_QUAL_AGG_TIME_LIMIT_DEF (4000) /* 4 milliseconds */ +#define LINK_QUAL_AGG_TIME_LIMIT_MAX (65535) +#define LINK_QUAL_AGG_TIME_LIMIT_MIN (0) + +#define LINK_QUAL_AGG_DISABLE_START_DEF (3) +#define LINK_QUAL_AGG_DISABLE_START_MAX (255) +#define LINK_QUAL_AGG_DISABLE_START_MIN (0) + +#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (31) +#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (64) +#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0) + /** * struct iwl_link_qual_agg_params * diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 5ea3bc7..2addf73 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -985,8 +985,9 @@ static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, bool is_ap) link_cmd.general_params.single_stream_ant_msk = first_antenna(priv->hw_params.valid_tx_ant); link_cmd.general_params.dual_stream_ant_msk = 3; - link_cmd.agg_params.agg_dis_start_th = 3; - link_cmd.agg_params.agg_time_limit = cpu_to_le16(4000); + link_cmd.agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; + link_cmd.agg_params.agg_time_limit = + cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); /* Update the rate scaling for control frame Tx to AP */ link_cmd.sta_id = is_ap ? IWL_AP_ID : priv->hw_params.bcast_sta_id; -- cgit v0.10.2 From c18bd87b65fa5f39abb0ab1b82bca416c23cb6dd Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Wed, 3 Jun 2009 11:44:12 -0700 Subject: iwlwifi: fix comment describing disable_11n Fixing a comment in the code describing this module parameter. The description printed when user runs "modinfo" is correct. Reported-by: Jiajia Zheng Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 4173a40..b52d0fb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -182,7 +182,7 @@ struct iwl_mod_params { int disable_hw_scan; /* def: 0 = use h/w scan */ int num_of_queues; /* def: HW dependent */ int num_of_ampdu_queues;/* def: HW dependent */ - int disable_11n; /* def: 0 = disable 11n capabilities */ + int disable_11n; /* def: 0 = 11n capabilities enabled */ int amsdu_size_8K; /* def: 1 = enable 8K amsdu size */ int antenna; /* def: 0 = both antennas (use diversity) */ int restart_fw; /* def: 1 = restart firmware */ -- cgit v0.10.2 From 2489e4ea6cfd1c0f3fe839f90363abccbbdb7745 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Wed, 3 Jun 2009 22:24:48 +0200 Subject: ar9170: remove deprecated code This patch removes code (deprecated by "cfg80211: add rfkill support" ) main.c: In function 'ar9170_op_config': main.c:1306: warning: '__IEEE80211_CONF_CHANGE_RADIO_ENABLED' is deprecated (declared at include/net/mac80211.h:551) and a useless device state. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h index 4c4b08f..c7cba66 100644 --- a/drivers/net/wireless/ath/ar9170/ar9170.h +++ b/drivers/net/wireless/ath/ar9170/ar9170.h @@ -102,7 +102,6 @@ enum ar9170_device_state { AR9170_STOPPED, AR9170_IDLE, AR9170_STARTED, - AR9170_ASSOCIATED, }; struct ar9170_rxstream_mpdu_merge { diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index b889fda..b104d7e 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -1303,11 +1303,6 @@ static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed) mutex_lock(&ar->mutex); - if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) { - /* TODO */ - err = 0; - } - if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) { /* TODO */ err = 0; @@ -1490,8 +1485,6 @@ static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw, } if (changed & BSS_CHANGED_ASSOC) { - ar->state = bss_conf->assoc ? AR9170_ASSOCIATED : ar->state; - #ifndef CONFIG_AR9170_LEDS /* enable assoc LED. */ err = ar9170_set_leds_state(ar, bss_conf->assoc ? 2 : 0); -- cgit v0.10.2 From 0c0c9e7076b69f93678e4ec711e2bf237398e623 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 4 Jun 2009 08:22:25 +0200 Subject: wimax: depend on rfkill properly My mistake, I should have added that when cleaning up rfkill and changing wimax. Reported-by: Randy Dunlap Signed-off-by: Johannes Berg Acked-by: Inaky Perez-Gonzalez Signed-off-by: John W. Linville diff --git a/net/wimax/Kconfig b/net/wimax/Kconfig index 0bdbb69..e4d97ab 100644 --- a/net/wimax/Kconfig +++ b/net/wimax/Kconfig @@ -4,6 +4,7 @@ menuconfig WIMAX tristate "WiMAX Wireless Broadband support" + depends on RFKILL || !RFKILL help Select to configure support for devices that provide -- cgit v0.10.2