From 72820386a1f5bb671351dcbe19f92d857f7d1de8 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 4 Mar 2013 14:06:31 -0800 Subject: ARM: msm: Concentrate defconfig on DT supported devices Make msm_defconfig more focused on DT devices, i.e. MSM8660 and MSM8960. This will encourage us to focus our efforts on the devicetree-ification of mach-msm, and help us catch build errors quicker. Signed-off-by: Stephen Boyd Signed-off-by: David Brown diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index 2b8f7af..3a5e519 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -1,72 +1,135 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MSM=y -CONFIG_MACH_HALIBUT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +CONFIG_ARCH_MSM8X60=y +CONFIG_ARCH_MSM8960=y +CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8" -CONFIG_PM=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_CLEANCACHE=y +CONFIG_CC_STACKPROTECTOR=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_NET=y +CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set +# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y +CONFIG_CFG80211=y +CONFIG_RFKILL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_SCSI_TGT=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_PHYLIB=y +CONFIG_SLIP=y +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_USB_USBNET=y +# CONFIG_USB_NET_AX8817X is not set +# CONFIG_USB_NET_ZAURUS is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_INPUT_MOUSE is not set +# CONFIG_MOUSE_PS2 is not set +CONFIG_INPUT_JOYSTICK=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y -# CONFIG_SERIO is not set -CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_INPUT_UINPUT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y CONFIG_I2C=y -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_THERMAL=y +CONFIG_REGULATOR=y +CONFIG_MEDIA_SUPPORT=y CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_FB_MSM=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_MON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MSM=y +CONFIG_USB_ACM=y +CONFIG_USB_SERIAL=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_VBUS_DRAW=500 CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_INOTIFY=y +CONFIG_RTC_CLASS=y +CONFIG_STAGING=y +CONFIG_MSM_IOMMU=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT4_FS=y +CONFIG_FUSE_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_CIFS=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SCHEDSTATS=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +CONFIG_TIMER_STATS=y CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y +CONFIG_DYNAMIC_DEBUG=y -- cgit v0.10.2 From dd465b2400a77bea6e5a95045feb6dbcf2e48a38 Mon Sep 17 00:00:00 2001 From: David Brown Date: Mon, 11 Mar 2013 17:12:17 -0700 Subject: ARM: msm: enable SSBI driver in defconfig Signed-off-by: David Brown diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index 3a5e519..44f9291 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -84,6 +84,7 @@ CONFIG_HW_RANDOM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y +CONFIG_SSBI=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y -- cgit v0.10.2 From aee14423e79eddf3c4fa97d7015164d150b75e45 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 16 Jan 2013 08:54:18 +0100 Subject: ARM: shmobile: use GPIO SD-card detection on armadillo800eva Switch SDHI0 and SDHI1 SD-card interfaces on armadillo800eva to using GPIO card detection, which provides maximum power saving and automatically selects IRQ or polling mode, depending on the CD GPIO capability. Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Acked-by: Linus Walleij Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 04eff93..60694e8 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -579,10 +579,10 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] = static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\ - MMC_CAP_NEEDS_POLL, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + .cd_gpio = GPIO_PORT167, }; static struct resource sdhi0_resources[] = { @@ -623,7 +623,9 @@ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + /* Port72 cannot generate IRQs, will be used in polling mode. */ + .cd_gpio = GPIO_PORT72, }; static struct resource sdhi1_resources[] = { -- cgit v0.10.2 From 3a5eed5f9e0734c4d3b5b42f7db443a33e2ba665 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 13 Feb 2013 11:34:03 +0100 Subject: ARM: shmobile: switch SDHI0 to GPIO regulator on armadillo800eva When regulators are used with MMC devices, explicitly provided OCR masks are ignored, they can be removed from platform data. Also switch SDHI0 from fixed regulator with hard-wired GPIO levels to a proper GPIO regulator instance to enable dynamic voltage switching. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 60694e8..f322a18 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -28,8 +28,10 @@ #include #include #include +#include #include #include +#include #include #include #include @@ -555,17 +557,94 @@ static struct platform_device gpio_keys_device = { }, }; -/* Fixed 3.3V regulator to be used by SDHI0, SDHI1, MMCIF */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = -{ - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +/* Fixed 3.3V regulator to be used by SDHI1, MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), REGULATOR_SUPPLY("vmmc", "sh_mmcif"), REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), }; +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply vcc_sdhi0_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vcc_sdhi0_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), + .consumer_supplies = vcc_sdhi0_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi0_info = { + .supply_name = "SDHI0 Vcc", + .microvolts = 3300000, + .gpio = GPIO_PORT75, + .enable_high = 1, + .init_data = &vcc_sdhi0_init_data, +}; + +static struct platform_device vcc_sdhi0 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &vcc_sdhi0_info, + }, +}; + +/* 1.8 / 3.3V SDHI0 VccQ regulator */ +static struct regulator_consumer_supply vccq_sdhi0_consumers[] = { + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vccq_sdhi0_init_data = { + .constraints = { + .input_uV = 3300000, + .min_uV = 1800000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vccq_sdhi0_consumers), + .consumer_supplies = vccq_sdhi0_consumers, +}; + +static struct gpio vccq_sdhi0_gpios[] = { + {GPIO_PORT17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" }, +}; + +static struct gpio_regulator_state vccq_sdhi0_states[] = { + { .value = 3300000, .gpios = (0 << 0) }, + { .value = 1800000, .gpios = (1 << 0) }, +}; + +static struct gpio_regulator_config vccq_sdhi0_info = { + .supply_name = "vqmmc", + + .enable_gpio = GPIO_PORT74, + .enable_high = 1, + .enabled_at_boot = 0, + + .gpios = vccq_sdhi0_gpios, + .nr_gpios = ARRAY_SIZE(vccq_sdhi0_gpios), + + .states = vccq_sdhi0_states, + .nr_states = ARRAY_SIZE(vccq_sdhi0_states), + + .type = REGULATOR_VOLTAGE, + .init_data = &vccq_sdhi0_init_data, +}; + +static struct platform_device vccq_sdhi0 = { + .name = "gpio-regulator", + .id = -1, + .dev = { + .platform_data = &vccq_sdhi0_info, + }, +}; + /* SDHI0 */ /* * FIXME @@ -580,7 +659,6 @@ static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, - .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, .cd_gpio = GPIO_PORT167, }; @@ -622,7 +700,6 @@ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, - .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, /* Port72 cannot generate IRQs, will be used in polling mode. */ .cd_gpio = GPIO_PORT72, @@ -673,7 +750,6 @@ static const struct pinctrl_map eva_sdhi1_pinctrl_map[] = { /* MMCIF */ static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, - .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, @@ -926,6 +1002,8 @@ static struct platform_device *eva_devices[] __initdata = { &fsi_wm8978_device, &fsi_hdmi_device, &i2c_gpio_device, + &vcc_sdhi0, + &vccq_sdhi0, }; static const struct pinctrl_map eva_pinctrl_map[] = { @@ -1060,13 +1138,6 @@ static void __init eva_init(void) usb = &usbhsf_device; } - /* SDHI0 */ - gpio_request_one(17, GPIOF_OUT_INIT_LOW, NULL); /* SDHI0_18/33_B */ - gpio_request_one(74, GPIOF_OUT_INIT_HIGH, NULL); /* SDHI0_PON */ - gpio_request_one(75, GPIOF_OUT_INIT_HIGH, NULL); /* SDSLOT1_PON */ - - /* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */ - /* CEU0 */ gpio_request(GPIO_FN_VIO0_D7, NULL); gpio_request(GPIO_FN_VIO0_D6, NULL); -- cgit v0.10.2 From 626a645eb75415255aad3162f4da3f6988f0c8ec Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 12 Feb 2013 18:15:33 +0100 Subject: ARM: shmobile: streamline mackerel SD and MMC devices This patch fixes the following issues with SD and MMC interfaces on mackerel: 1. replace custom card-detection functions with standard GPIO CD API 2. resources don't have to be numbered 3. add SDHI interrupt names 4. remove OCR masks, where regulators are used 5. only specify SDHI CD interrupts on interfaces where a CD pin is present - SDHI0 6. don't instantiate an MMCIF device and initialise MMCIF pins if SDHI1 is selected Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 336ccb4..fb058c7 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -963,15 +963,6 @@ static struct platform_device nand_flash_device = { }, }; -/* - * The card detect pin of the top SD/MMC slot (CN7) is active low and is - * connected to GPIO A22 of SH7372 (GPIO 41). - */ -static int slot_cn7_get_cd(struct platform_device *pdev) -{ - return !gpio_get_value(41); -} - /* SDHI0 */ static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, @@ -982,21 +973,21 @@ static struct sh_mobile_sdhi_info sdhi0_info = { }; static struct resource sdhi0_resources[] = { - [0] = { + { .name = "SDHI0", .start = 0xe6850000, .end = 0xe68500ff, .flags = IORESOURCE_MEM, - }, - [1] = { + }, { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, .start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */, .flags = IORESOURCE_IRQ, - }, - [2] = { + }, { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */, .flags = IORESOURCE_IRQ, - }, - [3] = { + }, { + .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */, .flags = IORESOURCE_IRQ, }, @@ -1014,34 +1005,28 @@ static struct platform_device sdhi0_device = { #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* SDHI1 */ + +/* GPIO_PORT41 can trigger IRQ8, but it is used by USBHS1, we have to poll */ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, - .tmio_ocr_mask = MMC_VDD_165_195, - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL, - .get_cd = slot_cn7_get_cd, + .cd_gpio = GPIO_PORT41, }; static struct resource sdhi1_resources[] = { - [0] = { + { .name = "SDHI1", .start = 0xe6860000, .end = 0xe68600ff, .flags = IORESOURCE_MEM, - }, - [1] = { - .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, - .start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */ - .flags = IORESOURCE_IRQ, - }, - [2] = { + }, { .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */ .flags = IORESOURCE_IRQ, - }, - [3] = { + }, { .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */ .flags = IORESOURCE_IRQ, @@ -1059,43 +1044,32 @@ static struct platform_device sdhi1_device = { }; #endif +/* SDHI2 */ + /* * The card detect pin of the top SD/MMC slot (CN23) is active low and is - * connected to GPIO SCIFB_SCK of SH7372 (162). + * connected to GPIO SCIFB_SCK of SH7372 (GPIO_PORT162). */ -static int slot_cn23_get_cd(struct platform_device *pdev) -{ - return !gpio_get_value(162); -} - -/* SDHI2 */ static struct sh_mobile_sdhi_info sdhi2_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI2_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI2_RX, - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL, - .get_cd = slot_cn23_get_cd, + .cd_gpio = GPIO_PORT162, }; static struct resource sdhi2_resources[] = { - [0] = { + { .name = "SDHI2", .start = 0xe6870000, .end = 0xe68700ff, .flags = IORESOURCE_MEM, - }, - [1] = { - .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, - .start = evt2irq(0x1200), /* SDHI2_SDHI2I0 */ - .flags = IORESOURCE_IRQ, - }, - [2] = { + }, { .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */ .flags = IORESOURCE_IRQ, - }, - [3] = { + }, { .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */ .flags = IORESOURCE_IRQ, @@ -1134,11 +1108,12 @@ static struct resource sh_mmcif_resources[] = { static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, - .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, - .get_cd = slot_cn7_get_cd, + .use_cd_gpio = true, + /* card detect pin for SD/MMC slot (CN7) */ + .cd_gpio = GPIO_PORT41, .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; @@ -1263,9 +1238,10 @@ static struct platform_device *mackerel_devices[] __initdata = { &sdhi0_device, #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) &sdhi1_device, +#else + &sh_mmcif_device, #endif &sdhi2_device, - &sh_mmcif_device, &ceu_device, &mackerel_camera, &hdmi_device, @@ -1372,10 +1348,11 @@ static void __init mackerel_init(void) { "A3SP", &usbhs0_device, }, { "A3SP", &usbhs1_device, }, { "A3SP", &nand_flash_device, }, - { "A3SP", &sh_mmcif_device, }, { "A3SP", &sdhi0_device, }, #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) { "A3SP", &sdhi1_device, }, +#else + { "A3SP", &sh_mmcif_device, }, #endif { "A3SP", &sdhi2_device, }, { "A4R", &ceu_device, }, @@ -1486,11 +1463,35 @@ static void __init mackerel_init(void) /* SDHI0 PORT172 card-detect IRQ26 */ gpio_request(GPIO_FN_IRQ26_172, NULL); - /* card detect pin for MMC slot (CN7) */ - gpio_request_one(41, GPIOF_IN, NULL); +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) + /* enable SDHI1 */ + gpio_request(GPIO_FN_SDHICMD1, NULL); + gpio_request(GPIO_FN_SDHICLK1, NULL); + gpio_request(GPIO_FN_SDHID1_3, NULL); + gpio_request(GPIO_FN_SDHID1_2, NULL); + gpio_request(GPIO_FN_SDHID1_1, NULL); + gpio_request(GPIO_FN_SDHID1_0, NULL); +#else + /* MMCIF */ + gpio_request(GPIO_FN_MMCD0_0, NULL); + gpio_request(GPIO_FN_MMCD0_1, NULL); + gpio_request(GPIO_FN_MMCD0_2, NULL); + gpio_request(GPIO_FN_MMCD0_3, NULL); + gpio_request(GPIO_FN_MMCD0_4, NULL); + gpio_request(GPIO_FN_MMCD0_5, NULL); + gpio_request(GPIO_FN_MMCD0_6, NULL); + gpio_request(GPIO_FN_MMCD0_7, NULL); + gpio_request(GPIO_FN_MMCCMD0, NULL); + gpio_request(GPIO_FN_MMCCLK0, NULL); +#endif - /* card detect pin for microSD slot (CN23) */ - gpio_request_one(162, GPIOF_IN, NULL); + /* enable SDHI2 */ + gpio_request(GPIO_FN_SDHICMD2, NULL); + gpio_request(GPIO_FN_SDHICLK2, NULL); + gpio_request(GPIO_FN_SDHID2_3, NULL); + gpio_request(GPIO_FN_SDHID2_2, NULL); + gpio_request(GPIO_FN_SDHID2_1, NULL); + gpio_request(GPIO_FN_SDHID2_0, NULL); /* FLCTL */ gpio_request(GPIO_FN_D0_NAF0, NULL); -- cgit v0.10.2 From b3425eb9df0a57f0b4ce0ad66831028f6ffe1615 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 14 Feb 2013 23:26:54 +0100 Subject: ARM: shmobile: mark mackerel sh_mmcif_device __maybe_unused Patch eac036ef9e "ARM: shmobile: streamline mackerel SD and MMC devices" made the use of the sh_mmcif_device variable for mackarel optional, but the definition is always provided, causing a build warning. arch/arm/mach-shmobile/board-mackerel.c:1120:31: warning: 'sh_mmcif_device' defined but not used [-Wunused-variable] Marking the variable as __maybe_unused will do the right thing here. Signed-off-by: Arnd Bergmann Cc: Guennadi Liakhovetski Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index fb058c7..ef22ec4 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1118,7 +1118,7 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; -static struct platform_device sh_mmcif_device = { +static struct platform_device sh_mmcif_device __maybe_unused = { .name = "sh_mmcif", .id = 0, .dev = { -- cgit v0.10.2 From 73d6a69e3b3ae168fcb8d797e427c1b5fe132a40 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 29 Jan 2013 11:40:18 +0900 Subject: ARM: shmobile: marzen: Reference DT implementation Provide alternate board code for the marzen to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Signed-off-by: Simon Horman diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c62558..7965b9a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -136,6 +136,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ ccu9540.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7779-marzen-reference.dtb \ sh73a0-kzm9g.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \ diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts new file mode 100644 index 0000000..72be4c8 --- /dev/null +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -0,0 +1,47 @@ +/* + * Reference Device Tree Source for the Marzen board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Simon Horman + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7779.dtsi" + +/ { + model = "marzen"; + compatible = "renesas,marzen-reference", "renesas,r8a7779"; + + chosen { + bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + lan0@18000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&gic>; + interrupts = <0 28 0x4>; + reg-io-width = <4>; + vddvario-supply = <&fixedregulator3v3>; + vdd33a-supply = <&fixedregulator3v3>; + }; +}; diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 9255546..b15d4ff 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -102,6 +102,19 @@ config MACH_MARZEN select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR +config MACH_MARZEN_REFERENCE + bool "MARZEN board - Reference Device Tree Implementation" + depends on ARCH_R8A7779 + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select USE_OF + ---help--- + Use reference implementation of Marzen board support + which makes use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + config MACH_KZM9D bool "KZM9D board" depends on ARCH_EMEV2 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index b646ff4..3705d4f 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o obj-$(CONFIG_MACH_KOTA2) += board-kota2.o obj-$(CONFIG_MACH_BONITO) += board-bonito.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o +obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c new file mode 100644 index 0000000..480d882 --- /dev/null +++ b/arch/arm/mach-shmobile/board-marzen-reference.c @@ -0,0 +1,75 @@ +/* + * marzen board support - Reference DT implementation + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011 Magnus Damm + * Copyright (C) 2013 Simon Horman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include + +static const struct pinctrl_map marzen_pinctrl_map[] = { + /* SCIF2 (CN18: DEBUG0) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779", + "scif2_data_c", "scif2"), + /* SCIF4 (CN19: DEBUG1) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779", + "scif4_data", "scif4"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_wp", "sdhi0"), + /* SMSC */ + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", + "intc_irq1_b", "intc"), + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", + "lbsc_ex_cs0", "lbsc"), +}; + +static void __init marzen_init(void) +{ + pinctrl_register_mappings(marzen_pinctrl_map, + ARRAY_SIZE(marzen_pinctrl_map)); + r8a7779_pinmux_init(); + + r8a7779_add_standard_devices_dt(); +} + +static const char *marzen_boards_compat_dt[] __initdata = { + "renesas,marzen-reference", + NULL, +}; + +DT_MACHINE_START(MARZEN, "marzen") + .smp = smp_ops(r8a7779_smp_ops), + .map_io = r8a7779_map_io, + .init_early = r8a7779_init_delay, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = r8a7779_init_irq_dt, + .init_machine = marzen_init, + .init_time = shmobile_timer_init, + .dt_compat = marzen_boards_compat_dt, +MACHINE_END -- cgit v0.10.2 From b8b82b2983e5b7bccca3a037c886e2aad86aaeea Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 22 Nov 2012 00:34:25 +0900 Subject: ARM: shmobile: kzm9g: Reference DT implementation Provide alternate board code for the kzm9g to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Some notes: * Brings up the GIC interrupt handler using device tree * Brings up the following device using device tree: - MMCIF (MMC) * Does not bring up the INTC interrupt controller at all, thus external devices may not be used. In particular, the SMSC ethernet device may not be used and thus NFS root may not be used. * Uses existing C code and not device tree to initialise the following, which are needed for a working board: - SCIF (Serial) - CMT (Clock) - PFC (GPIO) To use this alternate board code instead of the normal board code, CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config. And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used. Includes fix by Thierry Reding to no longer use gic_handle_irq() Includes fixes by Guennadi Liakhovetski for recent pinmux changes. Cc: Guennadi Liakhovetski Cc: Thierry Reding Signed-off-by: Simon Horman diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7965b9a..ee9fbe4 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -138,6 +138,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ r8a7779-marzen-reference.dtb \ sh73a0-kzm9g.dtb \ + sh73a0-kzm9g-reference.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \ socfpga_vt.dtb diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts new file mode 100644 index 0000000..06f52f9 --- /dev/null +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -0,0 +1,41 @@ +/* + * Device Tree Source for the KZM-A9-GT board + * + * Copyright (C) 2012 Horms Solutions Ltd. + * + * Based on sh73a0-kzm9g.dts + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "sh73a0-reference.dtsi" + +/ { + model = "KZM-A9-GT"; + compatible = "renesas,kzm9g-reference", "renesas,sh73a0"; + + chosen { + bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"; + }; + + memory { + device_type = "memory"; + reg = <0x41000000 0x1e800000>; + }; + + fixedregulator1v8: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +&mmcif { + vmmc-supply = <&fixedregulator1v8>; + vqmmc-supply = <&fixedregulator1v8>; +}; diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index b15d4ff..0c48af9 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -129,6 +129,16 @@ config MACH_KZM9G select SND_SOC_AK4642 if SND_SIMPLE_CARD select USE_OF +config MACH_KZM9G_REFERENCE + bool "KZM-A9-GT board - Reference Device Tree Implementation" + depends on MACH_KZM9G + ---help--- + Use reference implementation of KZM-A9-GT board support + which makes as greater use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + comment "SH-Mobile System Configuration" config CPU_HAS_INTEVT diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 3705d4f..c621edf 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o +obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o # Framework support obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c new file mode 100644 index 0000000..caba1bb --- /dev/null +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -0,0 +1,87 @@ +/* + * KZM-A9-GT board support - Reference Device Tree Implementation + * + * Copyright (C) 2012 Horms Solutions Ltd. + * + * Based on board-kzm9g.c + * Copyright (C) 2012 Kuninori Morimoto + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct pinctrl_map kzm_pinctrl_map[] = { + PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0", + "i2c3_1", "i2c3"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", + "scifa4_data", "scifa4"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", + "scifa4_ctrl", "scifa4"), +}; + +static void __init kzm_init(void) +{ + sh73a0_add_standard_devices_dt(); + pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map)); + +#ifdef CONFIG_CACHE_L2X0 + /* Early BRESP enable, Shared attribute override enable, 64K*8way */ + l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); +#endif +} + +static void kzm9g_restart(char mode, const char *cmd) +{ +#define RESCNT2 IOMEM(0xe6188020) + /* Do soft power on reset */ + writel((1 << 31), RESCNT2); +} + +static const char *kzm9g_boards_compat_dt[] __initdata = { + "renesas,kzm9g-reference", + NULL, +}; + +/* Please note that the clock initialisation shcheme used in + * sh73a0_add_early_devices_dt() and sh73a0_add_standard_devices_dt() + * does not work with SMP as there is a yet to be resolved lock-up in + * workqueue initialisation. + * + * CONFIG_SMP should be disabled when using this code. + */ +DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") + .smp = smp_ops(sh73a0_smp_ops), + .map_io = sh73a0_map_io, + .init_early = sh73a0_init_delay, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = irqchip_init, + .init_machine = kzm_init, + .init_late = shmobile_init_late, + .init_time = shmobile_timer_init, + .restart = kzm9g_restart, + .dt_compat = kzm9g_boards_compat_dt, +MACHINE_END -- cgit v0.10.2 From 275cc1d4fcef076bb8f2ef01cf1540cd62b35eb9 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 8 Feb 2013 19:38:31 +0100 Subject: ARM: shmobile: parse DT and configure pinmux early on kzm9g-reference GPIOs can be provided by the pinctrl subsystem, which can be initialised by DT. Therefore DT has to be parsed before requesting GPIOs. Also non-DT pinmux has to be configured early. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index caba1bb..add537c 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -47,6 +47,7 @@ static void __init kzm_init(void) { sh73a0_add_standard_devices_dt(); pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map)); + sh73a0_pinmux_init(); #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ -- cgit v0.10.2 From f017d0119f59d442506cf884c7a43a9d12799a4e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 8 Feb 2013 19:38:27 +0100 Subject: ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-reference Add SDHI0 and SDHI2 interfaces to kzm9g-reference. With no pinctrl DT support we cannot use GPIO card-detection and regulator switching. Also update the MMCIF DT node to use all 8 data lines and avoid redundant information in DT. Cc: Laurent Pinchart [ horms+renesas@verge.net.au: Updated for pinmux changes by Laurent Pinchart ] Signed-off-by: Simon Horman diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 06f52f9..7fad4b9 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -27,15 +27,51 @@ reg = <0x41000000 0x1e800000>; }; - fixedregulator1v8: fixedregulator@0 { + reg_1p8v: regulator@0 { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_2p8v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + sdhi0: sdhi@0xee100000 { + compatible = "renesas,shmobile-sdhi"; + reg = <0xee100000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 83 4 + 0 84 4 + 0 85 4>; + vmmc-supply = <®_2p8v>; + bus-width = <4>; + toshiba,mmc-has-idle-wait; + }; + + sdhi2: sdhi@0xee140000 { + compatible = "renesas,shmobile-sdhi"; + reg = <0xee140000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 104 4 + 0 105 4>; + vmmc-supply = <®_2p8v>; + bus-width = <4>; + broken-cd; + toshiba,mmc-wrprotect-disable; + toshiba,mmc-has-idle-wait; }; }; &mmcif { - vmmc-supply = <&fixedregulator1v8>; - vqmmc-supply = <&fixedregulator1v8>; + bus-width = <8>; + vmmc-supply = <®_1p8v>; }; diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index add537c..3056698 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -28,19 +28,48 @@ #include #include #include +#include #include #include #include #include #include +static unsigned long pin_pullup_conf[] = { + PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0), +}; + static const struct pinctrl_map kzm_pinctrl_map[] = { PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0", "i2c3_1", "i2c3"), + /* MMCIF */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_data8_0", "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_ctrl_0", "mmc0"), + PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "PORT279", pin_pullup_conf), + PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_data8_0", pin_pullup_conf), + /* SCIFA4 */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", "scifa4_data", "scifa4"), PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", "scifa4_ctrl", "scifa4"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_wp", "sdhi0"), + /* SDHI2 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0", + "sdhi2_data4", "sdhi2"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0", + "sdhi2_ctrl", "sdhi2"), }; static void __init kzm_init(void) @@ -49,6 +78,13 @@ static void __init kzm_init(void) pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map)); sh73a0_pinmux_init(); + /* enable SD */ + gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); + gpio_request_one(GPIO_PORT15, GPIOF_OUT_INIT_HIGH, NULL); /* power */ + + gpio_request(GPIO_FN_SDHICLK2, NULL); + gpio_request_one(GPIO_PORT14, GPIOF_OUT_INIT_HIGH, NULL); /* power */ + #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); -- cgit v0.10.2 From f33d1c34766ea96f6113d4d42fd1d1ec7a166e47 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 15 Jan 2013 18:23:36 +0100 Subject: ARM: shmobile: simplify kzm9g Kconfig dependencies Reference kernel configurations for armadillo800eva and kzm9g boards do not have to depend on their respective "legacy" configurations, doing device instantiation in .c, they can be configured and built independently. Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Acked-by: Linus Walleij [horms+renesas@verge.net.au: created separate patch for kzm9g portion] Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 0c48af9..ab2bb71 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -131,7 +131,11 @@ config MACH_KZM9G config MACH_KZM9G_REFERENCE bool "KZM-A9-GT board - Reference Device Tree Implementation" - depends on MACH_KZM9G + depends on ARCH_SH73A0 + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SND_SOC_AK4642 if SND_SIMPLE_CARD + select USE_OF ---help--- Use reference implementation of KZM-A9-GT board support which makes as greater use of device tree at the expense -- cgit v0.10.2 From e30755f41d64ba95a23f4107cfbce83834778ae6 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 15 Feb 2013 21:38:20 +0900 Subject: ARM: shmobile: kzm9g: Remove warning about SMP Remove warning about SMP not working with the clock initialisation used for kzm9g reference. This is resolved by not selecting CONFIG_PREEMPT. Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index 3056698..4da3501 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -103,13 +103,6 @@ static const char *kzm9g_boards_compat_dt[] __initdata = { NULL, }; -/* Please note that the clock initialisation shcheme used in - * sh73a0_add_early_devices_dt() and sh73a0_add_standard_devices_dt() - * does not work with SMP as there is a yet to be resolved lock-up in - * workqueue initialisation. - * - * CONFIG_SMP should be disabled when using this code. - */ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") .smp = smp_ops(sh73a0_smp_ops), .map_io = sh73a0_map_io, -- cgit v0.10.2 From 5377762e2e004314bf9b83abf7f631b310d1fc40 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 15 Feb 2013 21:38:20 +0900 Subject: ARM: shmobile: kzm9g: Trim reference DT_MACHINE_START Remove .init_late and .restart from DT_MACHINE_START for kzm9g reference as these are not necessary to bring the board up which is the main aim of kzm9g reference. Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index 4da3501..e93473c 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -91,13 +91,6 @@ static void __init kzm_init(void) #endif } -static void kzm9g_restart(char mode, const char *cmd) -{ -#define RESCNT2 IOMEM(0xe6188020) - /* Do soft power on reset */ - writel((1 << 31), RESCNT2); -} - static const char *kzm9g_boards_compat_dt[] __initdata = { "renesas,kzm9g-reference", NULL, @@ -110,8 +103,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") .nr_irqs = NR_IRQS_LEGACY, .init_irq = irqchip_init, .init_machine = kzm_init, - .init_late = shmobile_init_late, .init_time = shmobile_timer_init, - .restart = kzm9g_restart, .dt_compat = kzm9g_boards_compat_dt, MACHINE_END -- cgit v0.10.2 From 0b6794ef6ef9d8594f049b407b01d5e281acfe6e Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 25 Feb 2013 01:39:44 -0800 Subject: ARM: shmobile: marzen: Use gic_iid macro for ICCIAR / interrupt ID ARM: shmobile: add gic_iid macro for ICCIAR / interrupt ID enabled to use gic_iid macro. This patch exchange current GIC interrupt setting from gic_spi() to gic_iid() Signed-off-by: Kuninori Morimoto [ horms+renesas@verge.net.au: Split irq.h portion into a separate patch ] Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 5852331..2333a2d 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -67,7 +67,7 @@ static struct resource smsc911x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(28), /* IRQ 1 */ + .start = gic_iid(0x3c), /* IRQ 1 */ .flags = IORESOURCE_IRQ, }, }; @@ -97,7 +97,7 @@ static struct resource sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(104), + .start = gic_iid(0x88), .flags = IORESOURCE_IRQ, }, }; @@ -215,7 +215,7 @@ static struct resource ehci0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(44), + .start = gic_iid(0x4c), .flags = IORESOURCE_IRQ, }, }; @@ -239,7 +239,7 @@ static struct resource ehci1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(45), + .start = gic_iid(0x4d), .flags = IORESOURCE_IRQ, }, }; @@ -269,7 +269,7 @@ static struct resource ohci0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(44), + .start = gic_iid(0x4c), .flags = IORESOURCE_IRQ, }, }; @@ -293,7 +293,7 @@ static struct resource ohci1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(45), + .start = gic_iid(0x4d), .flags = IORESOURCE_IRQ, }, }; -- cgit v0.10.2 From 48296a13e7f411402f080d0603724623fa3eee14 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 15 Feb 2013 22:48:36 +0900 Subject: ARM: shmobile: kzm9g: correct smsc regulator registration Correct the name of smsc devices used for regulator registration allowing the regulators to be found and used. This eliminates the need for CONFIG_REGULATOR_DUMMY when CONFIG_REGULATOR is set. Cc: Guennadi Liakhovetski Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index c1c0401..d2ace3a 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -63,8 +63,8 @@ /* Dummy supplies, where voltage doesn't matter */ static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x"), - REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), }; /* -- cgit v0.10.2 From ab70db5b81ac25691a5e040168fe4ea7fae7f39d Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Mon, 4 Mar 2013 15:24:21 +0530 Subject: ARM: davinci: defconfig: enable CGROUPS Newer filesystems like Fedora-18 don't support kernels where cgroups is not enabled. Enable it in defconfig so users don't have to enable it themselves. Signed-off-by: Sekhar Nori diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 9aaad36..7c86813 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_MODULES=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 3edc78a..c86fd75 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_MODULES=y -- cgit v0.10.2 From c791c036f844622bff767637be6df64b28634305 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 19 Mar 2013 13:47:39 +0100 Subject: ARM: shmobile: kzm9g: SDHI0 and SDHI1 use a 3.3V power supply kzm9g supplies 3.3V to its SDHI0 and SDHI2 interfaces. Specifying 2.8V prevents some (e.g. certain SDIO) cards from working. This patch fixes the voltage and removes redundant OCR masks from platform data. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 7fad4b9..cadcf30 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -36,11 +36,11 @@ regulator-boot-on; }; - reg_2p8v: regulator@1 { + reg_3p3v: regulator@1 { compatible = "regulator-fixed"; - regulator-name = "fixed-2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-boot-on; }; @@ -52,7 +52,7 @@ interrupts = <0 83 4 0 84 4 0 85 4>; - vmmc-supply = <®_2p8v>; + vmmc-supply = <®_3p3v>; bus-width = <4>; toshiba,mmc-has-idle-wait; }; @@ -63,7 +63,7 @@ interrupt-parent = <&gic>; interrupts = <0 104 4 0 105 4>; - vmmc-supply = <®_2p8v>; + vmmc-supply = <®_3p3v>; bus-width = <4>; broken-cd; toshiba,mmc-wrprotect-disable; diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index d2ace3a..e924b81 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -375,8 +375,8 @@ static struct platform_device mmc_device = { .resource = sh_mmcif_resources, }; -/* Fixed 2.8V regulators to be used by SDHI0 and SDHI2 */ -static struct regulator_consumer_supply fixed2v8_power_consumers[] = +/* Fixed 3.3V regulators to be used by SDHI0 and SDHI2 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), @@ -390,7 +390,6 @@ static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, - .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, }; static struct resource sdhi0_resources[] = { @@ -434,7 +433,6 @@ static struct sh_mobile_sdhi_info sdhi2_info = { TMIO_MMC_USE_GPIO_CD | TMIO_MMC_WRPROTECT_DISABLE, .tmio_caps = MMC_CAP_SD_HIGHSPEED, - .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, .cd_gpio = 13, }; @@ -716,8 +714,8 @@ static void __init kzm_init(void) { regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, ARRAY_SIZE(fixed1v8_power_consumers), 1800000); - regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers, - ARRAY_SIZE(fixed2v8_power_consumers), 2800000); + regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map)); -- cgit v0.10.2 From 546e5d3ef6f2f17c63de01f1cf43cdb51c1e9a6b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 19 Mar 2013 13:47:43 +0100 Subject: ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index cadcf30..f33b5cc 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "sh73a0-reference.dtsi" +/include/ "sh73a0.dtsi" / { model = "KZM-A9-GT"; @@ -44,34 +44,23 @@ regulator-always-on; regulator-boot-on; }; - - sdhi0: sdhi@0xee100000 { - compatible = "renesas,shmobile-sdhi"; - reg = <0xee100000 0x100>; - interrupt-parent = <&gic>; - interrupts = <0 83 4 - 0 84 4 - 0 85 4>; - vmmc-supply = <®_3p3v>; - bus-width = <4>; - toshiba,mmc-has-idle-wait; - }; - - sdhi2: sdhi@0xee140000 { - compatible = "renesas,shmobile-sdhi"; - reg = <0xee140000 0x100>; - interrupt-parent = <&gic>; - interrupts = <0 104 4 - 0 105 4>; - vmmc-supply = <®_3p3v>; - bus-width = <4>; - broken-cd; - toshiba,mmc-wrprotect-disable; - toshiba,mmc-has-idle-wait; - }; }; &mmcif { bus-width = <8>; vmmc-supply = <®_1p8v>; + status = "okay"; +}; + +&sdhi0 { + vmmc-supply = <®_3p3v>; + bus-width = <4>; + status = "okay"; +}; + +&sdhi2 { + vmmc-supply = <®_3p3v>; + bus-width = <4>; + broken-cd; + status = "okay"; }; diff --git a/arch/arm/boot/dts/sh73a0-reference.dtsi b/arch/arm/boot/dts/sh73a0-reference.dtsi deleted file mode 100644 index d4bb012..0000000 --- a/arch/arm/boot/dts/sh73a0-reference.dtsi +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Device Tree Source for the SH73A0 SoC - * - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/include/ "sh73a0.dtsi" - -/ { - compatible = "renesas,sh73a0"; - - mmcif: mmcif@0x10010000 { - compatible = "renesas,sh-mmcif"; - reg = <0xe6bd0000 0x100>; - interrupt-parent = <&gic>; - interrupts = <0 140 0x4 - 0 141 0x4>; - reg-io-width = <4>; - }; -}; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 8a59465..c89be38 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -97,4 +97,48 @@ 0 189 0x4 0 190 0x4>; }; + + mmcif: mmcif@0x10010000 { + compatible = "renesas,sh-mmcif"; + reg = <0xe6bd0000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 140 0x4 + 0 141 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + sdhi0: sdhi@0xee100000 { + compatible = "renesas,shmobile-sdhi"; + reg = <0xee100000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 83 4 + 0 84 4 + 0 85 4>; + toshiba,mmc-has-idle-wait; + status = "disabled"; + }; + + /* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */ + sdhi1: sdhi@0xee120000 { + compatible = "renesas,shmobile-sdhi"; + reg = <0xee120000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 88 4 + 0 89 4>; + toshiba,mmc-wrprotect-disable; + toshiba,mmc-has-idle-wait; + status = "disabled"; + }; + + sdhi2: sdhi@0xee140000 { + compatible = "renesas,shmobile-sdhi"; + reg = <0xee140000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 104 4 + 0 105 4>; + toshiba,mmc-wrprotect-disable; + toshiba,mmc-has-idle-wait; + status = "disabled"; + }; }; -- cgit v0.10.2 From a9060f89d9ad4e806c69acb1ea5ebdaeaa91e54b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 18 Mar 2013 19:26:40 +0100 Subject: ARM: shmobile: armadillo800eva: add a fixed voltage regulator for SDHI1 The SDHI1 power supply on armadillo800eva can be switched on and off. In the current version this is not used and the regulator is hard-wired to "on." This patch switches SDHI1 to a proper fixed-voltage regulator, using a GPIO to enable and disable it. Both SDHI0 and SDHI1 ports shall now be specifying the MMC_CAP_POWER_OFF_CARD MMC capability. Both interfaces tested with an SDIO card. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index f322a18..7a78f94 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -559,8 +559,6 @@ static struct platform_device gpio_keys_device = { /* Fixed 3.3V regulator to be used by SDHI1, MMCIF */ static struct regulator_consumer_supply fixed3v3_power_consumers[] = { - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), REGULATOR_SUPPLY("vmmc", "sh_mmcif"), REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), }; @@ -645,6 +643,35 @@ static struct platform_device vccq_sdhi0 = { }, }; +/* Fixed 3.3V regulator to be used by SDHI1 */ +static struct regulator_consumer_supply vcc_sdhi1_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data vcc_sdhi1_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi1_consumers), + .consumer_supplies = vcc_sdhi1_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi1_info = { + .supply_name = "SDHI1 Vcc", + .microvolts = 3300000, + .gpio = GPIO_PORT16, + .enable_high = 1, + .init_data = &vcc_sdhi1_init_data, +}; + +static struct platform_device vcc_sdhi1 = { + .name = "reg-fixed-voltage", + .id = 2, + .dev = { + .platform_data = &vcc_sdhi1_info, + }, +}; + /* SDHI0 */ /* * FIXME @@ -658,7 +685,8 @@ static struct platform_device vccq_sdhi0 = { static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_POWER_OFF_CARD, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, .cd_gpio = GPIO_PORT167, }; @@ -699,7 +727,8 @@ static struct platform_device sdhi0_device = { static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_POWER_OFF_CARD, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, /* Port72 cannot generate IRQs, will be used in polling mode. */ .cd_gpio = GPIO_PORT72, @@ -992,6 +1021,8 @@ static struct platform_device *eva_devices[] __initdata = { &lcdc0_device, &gpio_keys_device, &sh_eth_device, + &vcc_sdhi0, + &vccq_sdhi0, &sdhi0_device, &sh_mmcif_device, &hdmi_device, @@ -1002,8 +1033,6 @@ static struct platform_device *eva_devices[] __initdata = { &fsi_wm8978_device, &fsi_hdmi_device, &i2c_gpio_device, - &vcc_sdhi0, - &vccq_sdhi0, }; static const struct pinctrl_map eva_pinctrl_map[] = { @@ -1198,9 +1227,7 @@ static void __init eva_init(void) pinctrl_register_mappings(eva_sdhi1_pinctrl_map, ARRAY_SIZE(eva_sdhi1_pinctrl_map)); - /* SDSLOT2_PON */ - gpio_request_one(16, GPIOF_OUT_INIT_HIGH, NULL); - + platform_device_register(&vcc_sdhi1); platform_device_register(&sdhi1_device); } -- cgit v0.10.2 From 54ca74ef09a98fcbd77887bb6ff38986ff593955 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 18 Mar 2013 19:26:44 +0100 Subject: ARM: shmobile: kzm9g: add fixed voltage regulators for SDHI0 and SDHI2 Both SDHI0 and SDHI2 power supplies on kzm9g can be switched on and off. In the current version this is not used and the regulators are hard-wired to "on." This patch switches SDHI0 and SDHI2 to proper fixed-voltage regulators, using GPIOs to enable and disable them. Both ports shall now be specifying the MMC_CAP_POWER_OFF_CARD MMC capability. Only SDHI0 has been tested with an SDIO card, since SDHI2 is a microSD slot. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index e924b81..77a66ac 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -375,13 +375,64 @@ static struct platform_device mmc_device = { .resource = sh_mmcif_resources, }; -/* Fixed 3.3V regulators to be used by SDHI0 and SDHI2 */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = +/* Fixed 3.3V regulators to be used by SDHI0 */ +static struct regulator_consumer_supply vcc_sdhi0_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vcc_sdhi0_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), + .consumer_supplies = vcc_sdhi0_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi0_info = { + .supply_name = "SDHI0 Vcc", + .microvolts = 3300000, + .gpio = 15, + .enable_high = 1, + .init_data = &vcc_sdhi0_init_data, +}; + +static struct platform_device vcc_sdhi0 = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &vcc_sdhi0_info, + }, +}; + +/* Fixed 3.3V regulators to be used by SDHI2 */ +static struct regulator_consumer_supply vcc_sdhi2_consumers[] = +{ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"), +}; + +static struct regulator_init_data vcc_sdhi2_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi2_consumers), + .consumer_supplies = vcc_sdhi2_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi2_info = { + .supply_name = "SDHI2 Vcc", + .microvolts = 3300000, + .gpio = 14, + .enable_high = 1, + .init_data = &vcc_sdhi2_init_data, +}; + +static struct platform_device vcc_sdhi2 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &vcc_sdhi2_info, + }, }; /* SDHI */ @@ -389,7 +440,8 @@ static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, - .tmio_caps = MMC_CAP_SD_HIGHSPEED, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_POWER_OFF_CARD, }; static struct resource sdhi0_resources[] = { @@ -432,7 +484,7 @@ static struct sh_mobile_sdhi_info sdhi2_info = { .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD | TMIO_MMC_WRPROTECT_DISABLE, - .tmio_caps = MMC_CAP_SD_HIGHSPEED, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_POWER_OFF_CARD, .cd_gpio = 13, }; @@ -592,6 +644,8 @@ static struct platform_device *kzm_devices[] __initdata = { &usbhs_device, &lcdc_device, &mmc_device, + &vcc_sdhi0, + &vcc_sdhi2, &sdhi0_device, &sdhi2_device, &gpio_keys_device, @@ -712,11 +766,9 @@ device_initcall(as3711_enable_lcdc_backlight); static void __init kzm_init(void) { - regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + regulator_register_always_on(2, "fixed-1.8V", fixed1v8_power_consumers, ARRAY_SIZE(fixed1v8_power_consumers), 1800000); - regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies)); pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map)); @@ -734,10 +786,6 @@ static void __init kzm_init(void) /* enable SD */ gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); - gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */ - - /* enable Micro SD */ - gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */ #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ -- cgit v0.10.2 From a463f731766e8273f44ba397233bfc7ecf752f98 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 19 Mar 2013 18:38:50 +0100 Subject: ARM: shmobile: kzm9g-reference: fix device-tree bindings and device names Fix several device-tree bindings, that haven't been updated for newest versions of respective drivers, and device names and pin numbers, left over from non-DT and old pinctrl versions. Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Signed-off-by: Simon Horman diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index c89be38..3e4d383 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -109,36 +109,36 @@ }; sdhi0: sdhi@0xee100000 { - compatible = "renesas,shmobile-sdhi"; + compatible = "renesas,r8a7740-sdhi"; reg = <0xee100000 0x100>; interrupt-parent = <&gic>; interrupts = <0 83 4 0 84 4 0 85 4>; - toshiba,mmc-has-idle-wait; + cap-sd-highspeed; status = "disabled"; }; /* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */ sdhi1: sdhi@0xee120000 { - compatible = "renesas,shmobile-sdhi"; + compatible = "renesas,r8a7740-sdhi"; reg = <0xee120000 0x100>; interrupt-parent = <&gic>; interrupts = <0 88 4 0 89 4>; toshiba,mmc-wrprotect-disable; - toshiba,mmc-has-idle-wait; + cap-sd-highspeed; status = "disabled"; }; sdhi2: sdhi@0xee140000 { - compatible = "renesas,shmobile-sdhi"; + compatible = "renesas,r8a7740-sdhi"; reg = <0xee140000 0x100>; interrupt-parent = <&gic>; interrupts = <0 104 4 0 105 4>; toshiba,mmc-wrprotect-disable; - toshiba,mmc-has-idle-wait; + cap-sd-highspeed; status = "disabled"; }; }; diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index e93473c..aefa50d 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -40,16 +40,16 @@ static unsigned long pin_pullup_conf[] = { }; static const struct pinctrl_map kzm_pinctrl_map[] = { - PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "pfc-sh73a0", "i2c3_1", "i2c3"), /* MMCIF */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", "mmc0_data8_0", "mmc0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", "mmc0_ctrl_0", "mmc0"), - PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", "PORT279", pin_pullup_conf), - PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", "mmc0_data8_0", pin_pullup_conf), /* SCIFA4 */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", @@ -57,18 +57,18 @@ static const struct pinctrl_map kzm_pinctrl_map[] = { PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", "scifa4_ctrl", "scifa4"), /* SDHI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", "sdhi0_data4", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", "sdhi0_ctrl", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", "sdhi0_cd", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", "sdhi0_wp", "sdhi0"), /* SDHI2 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0", "sdhi2_data4", "sdhi2"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0", + PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0", "sdhi2_ctrl", "sdhi2"), }; @@ -80,10 +80,9 @@ static void __init kzm_init(void) /* enable SD */ gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); - gpio_request_one(GPIO_PORT15, GPIOF_OUT_INIT_HIGH, NULL); /* power */ + gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */ - gpio_request(GPIO_FN_SDHICLK2, NULL); - gpio_request_one(GPIO_PORT14, GPIOF_OUT_INIT_HIGH, NULL); /* power */ + gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */ #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ -- cgit v0.10.2 From ac22dde76c80a3ffa3c3c24cf16bb8076b20b767 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 21 Mar 2013 20:18:12 +0900 Subject: Revert "ARM: shmobile: streamline mackerel SD and MMC devices" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 626a645eb75415255aad3162f4da3f6988f0c8ec. This appears to be incompatible with "ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs" Reverting this change resolves the following build failure: arch/arm/mach-shmobile/board-mackerel.c: In function ‘mackerel_init’: arch/arm/mach-shmobile/board-mackerel.c:1468: error: ‘GPIO_FN_SDHICMD1’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1468: error: (Each undeclared identifier is reported only once arch/arm/mach-shmobile/board-mackerel.c:1468: error: for each function it appears in.) arch/arm/mach-shmobile/board-mackerel.c:1469: error: ‘GPIO_FN_SDHICLK1’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1470: error: ‘GPIO_FN_SDHID1_3’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1471: error: ‘GPIO_FN_SDHID1_2’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1472: error: ‘GPIO_FN_SDHID1_1’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1473: error: ‘GPIO_FN_SDHID1_0’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1489: error: ‘GPIO_FN_SDHICMD2’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1490: error: ‘GPIO_FN_SDHICLK2’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1491: error: ‘GPIO_FN_SDHID2_3’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1492: error: ‘GPIO_FN_SDHID2_2’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1493: error: ‘GPIO_FN_SDHID2_1’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1494: error: ‘GPIO_FN_SDHID2_0’ undeclared (first use in this function) Cc: Guennadi Liakhovetski Cc: Laurent Pinchart Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index ef22ec4..1a9c753 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -963,6 +963,15 @@ static struct platform_device nand_flash_device = { }, }; +/* + * The card detect pin of the top SD/MMC slot (CN7) is active low and is + * connected to GPIO A22 of SH7372 (GPIO 41). + */ +static int slot_cn7_get_cd(struct platform_device *pdev) +{ + return !gpio_get_value(41); +} + /* SDHI0 */ static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, @@ -973,21 +982,21 @@ static struct sh_mobile_sdhi_info sdhi0_info = { }; static struct resource sdhi0_resources[] = { - { + [0] = { .name = "SDHI0", .start = 0xe6850000, .end = 0xe68500ff, .flags = IORESOURCE_MEM, - }, { - .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, + }, + [1] = { .start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */, .flags = IORESOURCE_IRQ, - }, { - .name = SH_MOBILE_SDHI_IRQ_SDCARD, + }, + [2] = { .start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */, .flags = IORESOURCE_IRQ, - }, { - .name = SH_MOBILE_SDHI_IRQ_SDIO, + }, + [3] = { .start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */, .flags = IORESOURCE_IRQ, }, @@ -1005,28 +1014,34 @@ static struct platform_device sdhi0_device = { #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* SDHI1 */ - -/* GPIO_PORT41 can trigger IRQ8, but it is used by USBHS1, we have to poll */ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD, + .tmio_ocr_mask = MMC_VDD_165_195, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL, - .cd_gpio = GPIO_PORT41, + .get_cd = slot_cn7_get_cd, }; static struct resource sdhi1_resources[] = { - { + [0] = { .name = "SDHI1", .start = 0xe6860000, .end = 0xe68600ff, .flags = IORESOURCE_MEM, - }, { + }, + [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, + .start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */ + .flags = IORESOURCE_IRQ, + }, + [2] = { .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */ .flags = IORESOURCE_IRQ, - }, { + }, + [3] = { .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */ .flags = IORESOURCE_IRQ, @@ -1044,32 +1059,43 @@ static struct platform_device sdhi1_device = { }; #endif -/* SDHI2 */ - /* * The card detect pin of the top SD/MMC slot (CN23) is active low and is - * connected to GPIO SCIFB_SCK of SH7372 (GPIO_PORT162). + * connected to GPIO SCIFB_SCK of SH7372 (162). */ +static int slot_cn23_get_cd(struct platform_device *pdev) +{ + return !gpio_get_value(162); +} + +/* SDHI2 */ static struct sh_mobile_sdhi_info sdhi2_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI2_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI2_RX, - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL, - .cd_gpio = GPIO_PORT162, + .get_cd = slot_cn23_get_cd, }; static struct resource sdhi2_resources[] = { - { + [0] = { .name = "SDHI2", .start = 0xe6870000, .end = 0xe68700ff, .flags = IORESOURCE_MEM, - }, { + }, + [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, + .start = evt2irq(0x1200), /* SDHI2_SDHI2I0 */ + .flags = IORESOURCE_IRQ, + }, + [2] = { .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */ .flags = IORESOURCE_IRQ, - }, { + }, + [3] = { .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */ .flags = IORESOURCE_IRQ, @@ -1108,12 +1134,11 @@ static struct resource sh_mmcif_resources[] = { static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, + .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, - .use_cd_gpio = true, - /* card detect pin for SD/MMC slot (CN7) */ - .cd_gpio = GPIO_PORT41, + .get_cd = slot_cn7_get_cd, .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; @@ -1238,10 +1263,9 @@ static struct platform_device *mackerel_devices[] __initdata = { &sdhi0_device, #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) &sdhi1_device, -#else - &sh_mmcif_device, #endif &sdhi2_device, + &sh_mmcif_device, &ceu_device, &mackerel_camera, &hdmi_device, @@ -1348,11 +1372,10 @@ static void __init mackerel_init(void) { "A3SP", &usbhs0_device, }, { "A3SP", &usbhs1_device, }, { "A3SP", &nand_flash_device, }, + { "A3SP", &sh_mmcif_device, }, { "A3SP", &sdhi0_device, }, #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) { "A3SP", &sdhi1_device, }, -#else - { "A3SP", &sh_mmcif_device, }, #endif { "A3SP", &sdhi2_device, }, { "A4R", &ceu_device, }, @@ -1463,35 +1486,11 @@ static void __init mackerel_init(void) /* SDHI0 PORT172 card-detect IRQ26 */ gpio_request(GPIO_FN_IRQ26_172, NULL); -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) - /* enable SDHI1 */ - gpio_request(GPIO_FN_SDHICMD1, NULL); - gpio_request(GPIO_FN_SDHICLK1, NULL); - gpio_request(GPIO_FN_SDHID1_3, NULL); - gpio_request(GPIO_FN_SDHID1_2, NULL); - gpio_request(GPIO_FN_SDHID1_1, NULL); - gpio_request(GPIO_FN_SDHID1_0, NULL); -#else - /* MMCIF */ - gpio_request(GPIO_FN_MMCD0_0, NULL); - gpio_request(GPIO_FN_MMCD0_1, NULL); - gpio_request(GPIO_FN_MMCD0_2, NULL); - gpio_request(GPIO_FN_MMCD0_3, NULL); - gpio_request(GPIO_FN_MMCD0_4, NULL); - gpio_request(GPIO_FN_MMCD0_5, NULL); - gpio_request(GPIO_FN_MMCD0_6, NULL); - gpio_request(GPIO_FN_MMCD0_7, NULL); - gpio_request(GPIO_FN_MMCCMD0, NULL); - gpio_request(GPIO_FN_MMCCLK0, NULL); -#endif + /* card detect pin for MMC slot (CN7) */ + gpio_request_one(41, GPIOF_IN, NULL); - /* enable SDHI2 */ - gpio_request(GPIO_FN_SDHICMD2, NULL); - gpio_request(GPIO_FN_SDHICLK2, NULL); - gpio_request(GPIO_FN_SDHID2_3, NULL); - gpio_request(GPIO_FN_SDHID2_2, NULL); - gpio_request(GPIO_FN_SDHID2_1, NULL); - gpio_request(GPIO_FN_SDHID2_0, NULL); + /* card detect pin for microSD slot (CN23) */ + gpio_request_one(162, GPIOF_IN, NULL); /* FLCTL */ gpio_request(GPIO_FN_D0_NAF0, NULL); -- cgit v0.10.2 From f236f5aabe8ebd7824590ae82d701402ead237e7 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Tue, 19 Mar 2013 23:28:06 +0100 Subject: ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT Add support for NETGEAR ReadyNAS Duo v2 (Hardware specs available here: http://natisbad.org/NAS/). Almost everything is supported via provided .dts. A board-readynas.c file is nonetheless required for device not only converted to DT (Gbit controller). Signed-off-by: Arnaud Ebalard Tested-By: Arnaud Ebalard Acked-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c62558..125211d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ + kirkwood-netgear_readynas_duo_v2.dtb \ kirkwood-ns2.dtb \ kirkwood-ns2lite.dtb \ kirkwood-ns2max.dtb \ diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts new file mode 100644 index 0000000..1ca66ab --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -0,0 +1,180 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6282.dtsi" + +/ { + model = "NETGEAR ReadyNAS Duo v2"; + compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_uart0 + &pmx_button_power + &pmx_button_backup + &pmx_button_reset + &pmx_led_blue_power + &pmx_led_blue_activity + &pmx_led_blue_disk1 + &pmx_led_blue_disk2 + &pmx_led_blue_backup >; + pinctrl-names = "default"; + + pmx_button_power: pmx-button-power { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_button_backup: pmx-button-backup { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + pmx_led_blue_power: pmx-led-blue-power { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + pmx_led_blue_activity: pmx-led-blue-activity { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_blue_disk1: pmx-led-blue-disk1 { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + pmx_led_blue_disk2: pmx-led-blue-disk2 { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + pmx_led_blue_backup: pmx-led-blue-backup { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + }; + + i2c@11000 { + status = "okay"; + + rs5c372a: rs5c372a@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; + }; + + serial@12000 { + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "jffs2"; + reg = <0x1800000 0x6800000>; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_led { + label = "status:blue:power_led"; + gpios = <&gpio0 31 1>; /* GPIO 31 Active Low */ + linux,default-trigger = "default-on"; + }; + activity_led { + label = "status:blue:activity_led"; + gpios = <&gpio1 6 1>; /* GPIO 38 Active Low */ + }; + disk1_led { + label = "status:blue:disk1_led"; + gpios = <&gpio0 23 1>; /* GPIO 23 Active Low */ + }; + disk2_led { + label = "status:blue:disk2_led"; + gpios = <&gpio0 22 1>; /* GPIO 22 Active Low */ + }; + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 29 1>; /* GPIO 29 Active Low*/ + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power Button"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio1 15 1>; + }; + button@2 { + label = "Reset Button"; + linux,code = <0x198>; /* KEY_RESTART */ + gpios = <&gpio0 13 1>; + }; + button@3 { + label = "Backup Button"; + linux,code = <133>; /* KEY_COPY */ + gpios = <&gpio1 13 1>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB 3.0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 14 0>; + }; + }; +}; diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 13482ea..9eb9f48 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -34,6 +34,7 @@ CONFIG_MACH_NETSPACE_MAX_V2_DT=y CONFIG_MACH_NETSPACE_LITE_V2_DT=y CONFIG_MACH_NETSPACE_MINI_V2_DT=y CONFIG_MACH_OPENBLOCKS_A6_DT=y +CONFIG_MACH_READYNAS_DT=y CONFIG_MACH_TOPKICK_DT=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 7b6a64b..3fd07eb 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -194,6 +194,15 @@ config MACH_OPENBLOCKS_A6_DT Say 'Y' here if you want your kernel to support the Plat'Home OpenBlocks A6 (Flattened Device Tree). +config MACH_READYNAS_DT + bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + select ARM_APPENDED_DTB + select ARM_ATAG_DTB_COMPAT + help + Say 'Y' here if you want your kernel to support the + NETGEAR ReadyNAS Duo v2 using Fattened Device Tree. + config MACH_TOPKICK_DT bool "USI Topkick (Flattened Device Tree)" select ARCH_KIRKWOOD_DT diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 4cc4bee..ff0f3cb 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -39,4 +39,5 @@ obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o +obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index d367aa6..e5a3cfe 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -149,6 +149,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("mpl,cec4")) mplcec4_init(); + if (of_machine_is_compatible("netgear,readynas-duo-v2")) + netgear_readynas_init(); + if (of_machine_is_compatible("plathome,openblocks-a6")) openblocks_a6_init(); @@ -177,6 +180,7 @@ static const char * const kirkwood_dt_board_compat[] = { "lacie,netspace_lite_v2", "lacie,netspace_mini_v2", "mpl,cec4", + "netgear,readynas-duo-v2", "plathome,openblocks-a6", "usi,topkick", "zyxel,nsa310", diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c new file mode 100644 index 0000000..fb42c20 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-readynas.c @@ -0,0 +1,28 @@ +/* + * NETGEAR ReadyNAS Duo v2 Board setup for drivers not already + * converted to DT. + * + * Copyright (C) 2013, Arnaud EBALARD + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include "common.h" + +static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +void __init netgear_readynas_init(void) +{ + kirkwood_ge00_init(&netgear_readynas_ge00_data); + kirkwood_pcie_init(KW_PCIE0); +} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 5ed7056..7ee8670 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -141,6 +141,12 @@ void openblocks_a6_init(void); static inline void openblocks_a6_init(void) {}; #endif +#ifdef CONFIG_MACH_READYNAS_DT +void netgear_readynas_init(void); +#else +static inline void netgear_readynas_init(void) {}; +#endif + #ifdef CONFIG_MACH_TOPKICK_DT void usi_topkick_init(void); #else -- cgit v0.10.2 From c52af91db35a3082ba1d3b0a14a6ff9410244200 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Sat, 23 Mar 2013 13:58:22 +0100 Subject: ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig This patch just adds the missing MACH_GURUPLUG_DT to kirkwood_defconfig. Signed-off-by: Sebastian Hesselbarth Reported-by: Soeren Moch Acked-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 9eb9f48..46d704a 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -24,6 +24,7 @@ CONFIG_MACH_IB62X0_DT=y CONFIG_MACH_TS219_DT=y CONFIG_MACH_DOCKSTAR_DT=y CONFIG_MACH_GOFLEXNET_DT=y +CONFIG_MACH_GURUPLUG_DT=y CONFIG_MACH_LSXL_DT=y CONFIG_MACH_IOMEGA_IX2_200_DT=y CONFIG_MACH_KM_KIRKWOOD_DT=y -- cgit v0.10.2 From a0a56db9771f57667daff41cfa2546dad1abe6d9 Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Mon, 1 Apr 2013 12:43:44 +0530 Subject: ARM: davinci: use is IS_ENABLED macro This patches replaces #if defined() by IS_ENABLED macro, which provides better readability. Signed-off-by: Lad, Prabhakar Cc: Sekhar Nori Cc: Stephen Rothwell Cc: Randy Dunlap Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 6da25ee..b348e44 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -298,11 +298,7 @@ static const short da830_evm_emif25_pins[] = { -1 }; -#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) -#define HAS_MMC 1 -#else -#define HAS_MMC 0 -#endif +#define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI) #ifdef CONFIG_DA830_UI_NAND static struct mtd_partition da830_evm_nand_partitions[] = { diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index c2dfe06..a74dec7 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -335,12 +335,7 @@ static const short da850_evm_nor_pins[] = { -1 }; -#if defined(CONFIG_MMC_DAVINCI) || \ - defined(CONFIG_MMC_DAVINCI_MODULE) -#define HAS_MMC 1 -#else -#define HAS_MMC 0 -#endif +#define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI) static inline void da850_evm_setup_nor_nand(void) { diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 71735e7..a042f27 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -750,26 +750,11 @@ static int davinci_phy_fixup(struct phy_device *phydev) return 0; } -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#define HAS_ATA 1 -#else -#define HAS_ATA 0 -#endif - -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) -#define HAS_NOR 1 -#else -#define HAS_NOR 0 -#endif - -#if defined(CONFIG_MTD_NAND_DAVINCI) || \ - defined(CONFIG_MTD_NAND_DAVINCI_MODULE) -#define HAS_NAND 1 -#else -#define HAS_NAND 0 -#endif +#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) + +#define HAS_NOR IS_ENABLED(CONFIG_MTD_PHYSMAP) + +#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI) static __init void davinci_evm_init(void) { diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index de7adff..03785e0 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -117,12 +117,7 @@ static struct platform_device davinci_nand_device = { }, }; -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#define HAS_ATA 1 -#else -#define HAS_ATA 0 -#endif +#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) /* CPLD Register 0 bits to control ATA */ #define DM646X_EVM_ATA_RST BIT(0) diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 1c98107..ea6728b 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -167,20 +167,9 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = { .version = MMC_CTLR_VERSION_1 }; +#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#define HAS_ATA 1 -#else -#define HAS_ATA 0 -#endif - -#if defined(CONFIG_MTD_NAND_DAVINCI) || \ - defined(CONFIG_MTD_NAND_DAVINCI_MODULE) -#define HAS_NAND 1 -#else -#define HAS_NAND 0 -#endif +#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI) static __init void davinci_ntosd2_init(void) { diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 4c48a36..df135de 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -119,7 +119,7 @@ void __init davinci_init_ide(void) platform_device_register(&ide_device); } -#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) +#if IS_ENABLED(CONFIG_MMC_DAVINCI) static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 34509ff..5764d65 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -17,7 +17,7 @@ #define DA8XX_USB0_BASE 0x01e00000 #define DA8XX_USB1_BASE 0x01e25000 -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct musb_hdrc_eps_bits musb_eps[] = { { "ep1_tx", 8, }, { "ep1_rx", 8, }, -- cgit v0.10.2 From 0345a1e33978b60c8ea13235af5af8da3db6af5b Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 1 Apr 2013 23:03:00 +0300 Subject: ARM: OMAP1: fix omap_udc registration omap_udc platform device is not registered properly anymore: CONFIG_USB_GADGET_OMAP was deleted by 193ab2a6 (usb: gadget: allow multiple gadgets to be built) already in v3.1. Fix by using CONFIG_USB_OMAP instead. Tested on Nokia 770 by checking that omap_udc is probed & working properly when built as a module. Acked-by: Felipe Balbi Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 753cd5c..45e5ac7 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -2,7 +2,7 @@ * FIXME correct answer depends on hmc_mode, * as does (on omap1) any nonzero value for config->otg port number */ -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) #define is_usb0_device(config) 1 #else #define is_usb0_device(config) 0 diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 1a1db59..4118db5 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -123,7 +123,7 @@ omap_otg_init(struct omap_usb_config *config) syscon = omap_readl(OTG_SYSCON_1); syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->otg || config->register_dev) { struct platform_device *udc_device = config->udc_device; int status; @@ -169,7 +169,7 @@ omap_otg_init(struct omap_usb_config *config) void omap_otg_init(struct omap_usb_config *config) {} #endif -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) static struct resource udc_resources[] = { /* order is significant! */ @@ -600,7 +600,7 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK)) cpu_relax(); -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->register_dev) { int status; -- cgit v0.10.2 From 17fd8cdb3ac9832e1871a4cc57366084d534e737 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 1 Apr 2013 23:04:04 +0300 Subject: ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add missing regulator definitions for lis3lv02d accelerometer. Fixes the following probe issue: [ 57.737518] lis3lv02d_i2c 3-001d: Failed to get supply 'Vdd': -517 [ 57.747100] i2c 3-001d: Driver lis3lv02d_i2c requests probe deferral Reported-by: Pali Rohár Reviewed-by: Mark Brown Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 3a077df..1a88467 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -547,12 +547,16 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = { REGULATOR_SUPPLY("DVDD", "2-0019"), /* Si4713 IO supply */ REGULATOR_SUPPLY("vio", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd_IO", "3-001d"), }; static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), /* Si4713 supply */ REGULATOR_SUPPLY("vdd", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd", "3-001d"), }; static struct regulator_init_data rx51_vaux1 = { -- cgit v0.10.2 From 4fa840ee99ee3298c9329a3a3e0bdaa998b7fd76 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Fri, 5 Apr 2013 12:12:29 +0200 Subject: omap2+: Remove useless Makefile line Commit f41caddbe73f52a42f529d668ce47b4d693fd2c0 ("omap2+: Use Kconfig symbol in Makefile instead of obj-y") reorganized this Makefile. But, for some reason, it also added references to CONFIG_MACH_ENCORE and board-omap3encore.o. But there's no Kconfig symbol MACH_ENCORE and there's no file board-omap3encore.c. This line can safely be removed. Signed-off-by: Paul Bolle Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b068b7f..3d0697c 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -229,7 +229,6 @@ obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o -obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o -- cgit v0.10.2 From 7cab0c1302ee555eb6f3f01137845483d2a9f3bb Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Fri, 5 Apr 2013 12:16:32 +0200 Subject: omap2+: Remove useless Makefile line Merge commit 952414505f55afe5cd6dc004765076aa22b3ed7e ("Merge branch 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc") added references to CONFIG_MACH_PCM049 and board-omap4pcm049.o to this Makefile. But there's no Kconfig symbol MACH_PCM049 and there's no file board-omap4pcm049.c. This line can safely be removed. Signed-off-by: Paul Bolle Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 3d0697c..62bb352 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -254,8 +254,6 @@ obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o -obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o - obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o -- cgit v0.10.2 From 03784f22b97feeedd16db3f998882269231157c2 Mon Sep 17 00:00:00 2001 From: Ruslan Bilovol Date: Mon, 18 Feb 2013 15:20:52 +0200 Subject: ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor This patch enables BMP085 pressure sensor that can be found on OMAP4 Blaze Tablet development platform Signed-off-by: Ruslan Bilovol Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index bd07864..33903ca 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -93,6 +93,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_SENSORS_LIS3LV02D=m CONFIG_SENSORS_TSL2550=m CONFIG_SENSORS_LIS3_I2C=m +CONFIG_BMP085_I2C=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y -- cgit v0.10.2 From 2014f269490ca8825cb4c0f71f90ccc8f25c4aa1 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 11 Mar 2013 12:57:56 +0100 Subject: ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight Use pwm_leds driver for the keyboard light and pwm-backlight for the lcd backlight control (instead of implementing the PWM driver part in the board file). Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 8cef477..9a7174f 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include