From 8a60585159067f110075ef8ffda13abd94826daf Mon Sep 17 00:00:00 2001 From: "Govindraj.R" Date: Tue, 13 Sep 2011 13:32:32 +0530 Subject: ARM: OMAP2+: UART: cleanup 8250 console driver support We had been using traditional 8250 driver as uart console driver prior to omap-serial driver. Since we have omap-serial driver in mainline kernel for some time now it has been used as default uart console driver on omap2+ platforms. Remove 8250 support for omap-uarts. Serial_in and serial_out override for 8250 serial driver is also removed. Empty fifo read fix is already taken care with omap-serial driver with data ready bit check from LSR reg before reading RX fifo. Also waiting for THRE(transmit hold reg empty) is done with wait_for_xmitr in omap-serial driver. Serial_in/out overrides are not neceesary for omap-serial driver and things that are taken with omap-serial driver are removed here. Remove headers that were necessary to support 8250 support and remove all config bindings done to keep 8250 backward compatibility while adding omap-serial driver. Remove omap_uart_reset needed for 8250 autoconf. Signed-off-by: Govindraj.R Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 6378a2a..e027bc9 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -19,23 +19,17 @@ */ #include #include -#include #include #include #include #include #include -#include #include #include -#ifdef CONFIG_SERIAL_OMAP #include -#endif - #include "common.h" #include -#include #include #include #include @@ -47,10 +41,8 @@ #include "control.h" #include "mux.h" -#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 #define UART_OMAP_WER 0x17 /* Wake-up enable register */ -#define UART_ERRATA_FIFO_FULL_ABORT (0x1 << 0) #define UART_ERRATA_i202_MDR1_ACCESS (0x1 << 1) /* @@ -533,41 +525,6 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart) #define DEV_CREATE_FILE(dev, attr) #endif /* CONFIG_PM */ -#ifndef CONFIG_SERIAL_OMAP -/* - * Override the default 8250 read handler: mem_serial_in() - * Empty RX fifo read causes an abort on omap3630 and omap4 - * This function makes sure that an empty rx fifo is not read on these silicons - * (OMAP1/2/3430 are not affected) - */ -static unsigned int serial_in_override(struct uart_port *up, int offset) -{ - if (UART_RX == offset) { - unsigned int lsr; - lsr = __serial_read_reg(up, UART_LSR); - if (!(lsr & UART_LSR_DR)) - return -EPERM; - } - - return __serial_read_reg(up, offset); -} - -static void serial_out_override(struct uart_port *up, int offset, int value) -{ - unsigned int status, tmout = 10000; - - status = __serial_read_reg(up, UART_LSR); - while (!(status & UART_LSR_THRE)) { - /* Wait up to 10ms for the character(s) to be sent. */ - if (--tmout == 0) - break; - udelay(1); - status = __serial_read_reg(up, UART_LSR); - } - __serial_write_reg(up, offset, value); -} -#endif - static int __init omap_serial_early_init(void) { int i = 0; @@ -628,15 +585,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) void *pdata = NULL; u32 pdata_size = 0; char *name; -#ifndef CONFIG_SERIAL_OMAP - struct plat_serial8250_port ports[2] = { - {}, - {.flags = 0}, - }; - struct plat_serial8250_port *p = &ports[0]; -#else struct omap_uart_port_info omap_up; -#endif if (WARN_ON(!bdata)) return; @@ -651,51 +600,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) oh = uart->oh; uart->dma_enabled = 0; -#ifndef CONFIG_SERIAL_OMAP - name = "serial8250"; - - /* - * !! 8250 driver does not use standard IORESOURCE* It - * has it's own custom pdata that can be taken from - * the hwmod resource data. But, this needs to be - * done after the build. - * - * ?? does it have to be done before the register ?? - * YES, because platform_device_data_add() copies - * pdata, it does not use a pointer. - */ - p->flags = UPF_BOOT_AUTOCONF; - p->iotype = UPIO_MEM; - p->regshift = 2; - p->uartclk = OMAP24XX_BASE_BAUD * 16; - p->irq = oh->mpu_irqs[0].irq; - p->mapbase = oh->slaves[0]->addr->pa_start; - p->membase = omap_hwmod_get_mpu_rt_va(oh); - p->irqflags = IRQF_SHARED; - p->private_data = uart; - - /* - * omap44xx, ti816x: Never read empty UART fifo - * omap3xxx: Never read empty UART fifo on UARTs - * with IP rev >=0x52 - */ - uart->regshift = p->regshift; - uart->membase = p->membase; - if (cpu_is_omap44xx() || cpu_is_ti81xx()) - uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; - else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF) - >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) - uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; - - if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) { - p->serial_in = serial_in_override; - p->serial_out = serial_out_override; - } - - pdata = &ports[0]; - pdata_size = 2 * sizeof(struct plat_serial8250_port); -#else - name = DRIVER_NAME; omap_up.dma_enabled = uart->dma_enabled; @@ -707,7 +611,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) pdata = &omap_up; pdata_size = sizeof(struct omap_uart_port_info); -#endif if (WARN_ON(!oh)) return; -- cgit v0.10.2