From 2fa0f93915eacf758da800e2c67b3b9adef1c5c5 Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Thu, 21 Oct 2010 11:42:28 +0200 Subject: [ARM] Kirkwood: enhance TCLK detection According to the Marvell LSP, the Sample at Reset regiter bit 21 can be used to detect TCLK on 6281 and 6282 devices. This patch has only been tested on LaCie boards. Signed-off-by: Simon Guinot Acked-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 1c82d42..ee99a5a 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -854,10 +854,9 @@ int __init kirkwood_find_tclk(void) kirkwood_pcie_id(&dev, &rev); - if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 || - rev == MV88F6281_REV_A1)) || - (dev == MV88F6282_DEV_ID)) - return 200000000; + if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID) + if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0) + return 200000000; return 166666667; } -- cgit v0.10.2 From d3491820e8a65c4a51c8e2a165c6a13f864101ba Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Thu, 21 Oct 2010 11:42:29 +0200 Subject: [ARM] Kirkwood: fix timer initialization for LaCie boards Signed-off-by: Simon Guinot Acked-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c index cd62d0f..b8078ae 100644 --- a/arch/arm/mach-kirkwood/d2net_v2-setup.c +++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c @@ -227,5 +227,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2") .init_machine = d2net_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c index d3ea1b6..285edab 100644 --- a/arch/arm/mach-kirkwood/lacie_v2-common.c +++ b/arch/arm/mach-kirkwood/lacie_v2-common.c @@ -111,17 +111,3 @@ void __init lacie_v2_hdd_power_init(int hdd_num) pr_err("Failed to power up HDD%d\n", i + 1); } } - -/***************************************************************************** - * Timer - ****************************************************************************/ - -static void lacie_v2_timer_init(void) -{ - kirkwood_tclk = 166666667; - orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); -} - -struct sys_timer lacie_v2_timer = { - .init = lacie_v2_timer_init, -}; diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h index af52131..fc64f57 100644 --- a/arch/arm/mach-kirkwood/lacie_v2-common.h +++ b/arch/arm/mach-kirkwood/lacie_v2-common.h @@ -13,6 +13,4 @@ void lacie_v2_register_flash(void); void lacie_v2_register_i2c_devices(void); void lacie_v2_hdd_power_init(int hdd_num); -extern struct sys_timer lacie_v2_timer; - #endif diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index fed264d..fc934e5 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -221,7 +221,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif @@ -233,7 +233,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif @@ -245,6 +245,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") .init_machine = netspace_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c index d970e1e..a855c9f 100644 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -405,7 +405,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif @@ -417,6 +417,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, - .timer = &lacie_v2_timer, + .timer = &kirkwood_timer, MACHINE_END #endif -- cgit v0.10.2 From 3924996bab2845bdf9a9d16ff7c20445de1ab55d Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 21 Oct 2010 15:48:33 -0400 Subject: [ARM] Kirkwood: restrict the scope of the PCIe reset workaround Commit 21f0ba90a447 "orion/kirkwood: reset PCIe unit on boot" made the reset of the PCIe unit unconditional. While this may fix problems on some targets, this also causes problems on other targets. Saeed Bishara said about the original problem: "We couln't pinpoint the root cause of this issue, actually we failed to reproduce that issue." So let's restrict the reset of the PCIe unit only to the target where the original problem was observed. Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 2e14afe..6995199 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -27,6 +27,10 @@ #include "mpp.h" #include "tsx1x-common.h" +/* for the PCIe reset workaround */ +#include + + #define QNAP_TS41X_JUMPER_JP1 45 static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = { @@ -140,8 +144,16 @@ static void __init qnap_ts41x_init(void) static int __init ts41x_pci_init(void) { - if (machine_is_ts41x()) + if (machine_is_ts41x()) { + /* + * Without this explicit reset, the PCIe SATA controller + * (Marvell 88sx7042/sata_mv) is known to stop working + * after a few minutes. + */ + orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE); + kirkwood_pcie_init(KW_PCIE0); + } return 0; } diff --git a/arch/arm/plat-orion/include/plat/pcie.h b/arch/arm/plat-orion/include/plat/pcie.h index 3ebfef7..cc99163 100644 --- a/arch/arm/plat-orion/include/plat/pcie.h +++ b/arch/arm/plat-orion/include/plat/pcie.h @@ -11,12 +11,15 @@ #ifndef __PLAT_PCIE_H #define __PLAT_PCIE_H +struct pci_bus; + u32 orion_pcie_dev_id(void __iomem *base); u32 orion_pcie_rev(void __iomem *base); int orion_pcie_link_up(void __iomem *base); int orion_pcie_x4_mode(void __iomem *base); int orion_pcie_get_local_bus_nr(void __iomem *base); void orion_pcie_set_local_bus_nr(void __iomem *base, int nr); +void orion_pcie_reset(void __iomem *base); void orion_pcie_setup(void __iomem *base, struct mbus_dram_target_info *dram); int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus, diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index 779553a..af2d733 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -182,11 +182,6 @@ void __init orion_pcie_setup(void __iomem *base, u32 mask; /* - * soft reset PCIe unit - */ - orion_pcie_reset(base); - - /* * Point PCIe unit MBUS decode windows to DRAM space. */ orion_pcie_setup_wins(base, dram); -- cgit v0.10.2 From aaa8e2b34c35d67abf1892cd62ea4e7565ca262c Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Fri, 15 Oct 2010 13:16:53 +0200 Subject: drbd: consolidate explicit drbd_md_sync into drbd_create_new_uuid Every code path changing the current UUID needs to get it on stable storage anyways. Flush it to disk right there, remove the now obsolte explicit drbd_md_sync statements in the other code paths. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 8bfedc7..8d029b1 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -1267,7 +1267,6 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, if (test_bit(NEW_CUR_UUID, &mdev->flags)) { drbd_uuid_new_current(mdev); clear_bit(NEW_CUR_UUID, &mdev->flags); - drbd_md_sync(mdev); } spin_lock_irq(&mdev->req_lock); _drbd_set_state(_NS(mdev, susp_fen, 0), CS_VERBOSE, NULL); @@ -3659,6 +3658,8 @@ void drbd_uuid_new_current(struct drbd_conf *mdev) __must_hold(local) get_random_bytes(&val, sizeof(u64)); _drbd_uuid_set(mdev, UI_CURRENT, val); + /* get it to stable storage _now_ */ + drbd_md_sync(mdev); } void drbd_uuid_set_bm(struct drbd_conf *mdev, u64 val) __must_hold(local) diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index 87925e9..c498c48 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -1953,7 +1953,6 @@ static int drbd_nl_resume_io(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp if (test_bit(NEW_CUR_UUID, &mdev->flags)) { drbd_uuid_new_current(mdev); clear_bit(NEW_CUR_UUID, &mdev->flags); - drbd_md_sync(mdev); } drbd_suspend_io(mdev); reply->ret_code = drbd_request_state(mdev, NS3(susp, 0, susp_nod, 0, susp_fen, 0)); -- cgit v0.10.2 From 3beec1d446fba335f07787636920892dd3b2c658 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Thu, 14 Oct 2010 13:31:48 +0200 Subject: drbd: tag a few error messages with "assert failed" If those messages ever get logged, clearly state that they are actually failed ASSERTS, so our regression tests can pick them up from the logs more easily. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index c07c370..e0e0bf6 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -114,11 +114,11 @@ struct drbd_conf; #define D_ASSERT(exp) if (!(exp)) \ dev_err(DEV, "ASSERT( " #exp " ) in %s:%d\n", __FILE__, __LINE__) -#define ERR_IF(exp) if (({ \ - int _b = (exp) != 0; \ - if (_b) dev_err(DEV, "%s: (%s) in %s:%d\n", \ - __func__, #exp, __FILE__, __LINE__); \ - _b; \ +#define ERR_IF(exp) if (({ \ + int _b = (exp) != 0; \ + if (_b) dev_err(DEV, "ASSERT FAILED: %s: (%s) in %s:%d\n", \ + __func__, #exp, __FILE__, __LINE__); \ + _b; \ })) /* Defines to control fault insertion */ -- cgit v0.10.2 From 82f59cc6353889b426cf13b6596d5a3d100fa09e Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Sat, 16 Oct 2010 12:13:47 +0200 Subject: drbd: fix potential deadlock on detach If we have contention in drbd_al_begin_iod (heavy randon IO), an administrative request to detach the disk may deadlock for similar reasons as the recently fixed deadlock if detaching because of IO-error. The approach taken here is to either go through the intermediate cleanup state D_FAILED, or first lock out application io, don't just go directly to D_DISKLESS. We need an additional state bit (WAS_IO_ERROR) to distinguish the -> D_FAILED because of IO-error from other failures. Sanitize D_ATTACHING -> D_FAILED to D_ATTACHING -> D_DISKLESS. If only attaching, ldev may be missing still, but would be referenced from within the after_state_ch for -> D_FAILED, potentially dereferencing a NULL pointer. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index e0e0bf6..03c15e3 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -852,7 +852,8 @@ enum { BITMAP_IO, /* suspend application io; once no more io in flight, start bitmap io */ BITMAP_IO_QUEUED, /* Started bitmap IO */ - GO_DISKLESS, /* Disk failed, local_cnt reached zero, we are going diskless */ + GO_DISKLESS, /* Disk is being detached, on io-error or admin request. */ + WAS_IO_ERROR, /* Local disk failed returned IO error */ RESYNC_AFTER_NEG, /* Resync after online grow after the attach&negotiate finished. */ NET_CONGESTED, /* The data socket is congested */ @@ -1281,6 +1282,7 @@ extern int drbd_bmio_set_n_write(struct drbd_conf *mdev); extern int drbd_bmio_clear_n_write(struct drbd_conf *mdev); extern int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf *), char *why); extern void drbd_go_diskless(struct drbd_conf *mdev); +extern void drbd_ldev_destroy(struct drbd_conf *mdev); /* Meta data layout @@ -1798,17 +1800,17 @@ static inline void __drbd_chk_io_error_(struct drbd_conf *mdev, int forcedetach, case EP_PASS_ON: if (!forcedetach) { if (__ratelimit(&drbd_ratelimit_state)) - dev_err(DEV, "Local IO failed in %s." - "Passing error on...\n", where); + dev_err(DEV, "Local IO failed in %s.\n", where); break; } /* NOTE fall through to detach case if forcedetach set */ case EP_DETACH: case EP_CALL_HELPER: + set_bit(WAS_IO_ERROR, &mdev->flags); if (mdev->state.disk > D_FAILED) { _drbd_set_state(_NS(mdev, disk, D_FAILED), CS_HARD, NULL); - dev_err(DEV, "Local IO failed in %s." - "Detaching...\n", where); + dev_err(DEV, + "Local IO failed in %s. Detaching...\n", where); } break; } @@ -2127,7 +2129,11 @@ static inline void put_ldev(struct drbd_conf *mdev) __release(local); D_ASSERT(i >= 0); if (i == 0) { + if (mdev->state.disk == D_DISKLESS) + /* even internal references gone, safe to destroy */ + drbd_ldev_destroy(mdev); if (mdev->state.disk == D_FAILED) + /* all application IO references gone. */ drbd_go_diskless(mdev); wake_up(&mdev->misc_wait); } @@ -2138,6 +2144,10 @@ static inline int _get_ldev_if_state(struct drbd_conf *mdev, enum drbd_disk_stat { int io_allowed; + /* never get a reference while D_DISKLESS */ + if (mdev->state.disk == D_DISKLESS) + return 0; + atomic_inc(&mdev->local_cnt); io_allowed = (mdev->state.disk >= mins); if (!io_allowed) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 8d029b1..992c3ae 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -834,6 +834,15 @@ static union drbd_state sanitize_state(struct drbd_conf *mdev, union drbd_state ns.conn != C_UNCONNECTED && ns.conn != C_DISCONNECTING && ns.conn <= C_TEAR_DOWN) ns.conn = os.conn; + /* we cannot fail (again) if we already detached */ + if (ns.disk == D_FAILED && os.disk == D_DISKLESS) + ns.disk = D_DISKLESS; + + /* if we are only D_ATTACHING yet, + * we can (and should) go directly to D_DISKLESS. */ + if (ns.disk == D_FAILED && os.disk == D_ATTACHING) + ns.disk = D_DISKLESS; + /* After C_DISCONNECTING only C_STANDALONE may follow */ if (os.conn == C_DISCONNECTING && ns.conn != C_STANDALONE) ns.conn = os.conn; @@ -1055,7 +1064,15 @@ int __drbd_set_state(struct drbd_conf *mdev, !test_and_set_bit(CONFIG_PENDING, &mdev->flags)) set_bit(DEVICE_DYING, &mdev->flags); - mdev->state.i = ns.i; + /* if we are going -> D_FAILED or D_DISKLESS, grab one extra reference + * on the ldev here, to be sure the transition -> D_DISKLESS resp. + * drbd_ldev_destroy() won't happen before our corresponding + * after_state_ch works run, where we put_ldev again. */ + if ((os.disk != D_FAILED && ns.disk == D_FAILED) || + (os.disk != D_DISKLESS && ns.disk == D_DISKLESS)) + atomic_inc(&mdev->local_cnt); + + mdev->state = ns; wake_up(&mdev->misc_wait); wake_up(&mdev->state_wait); @@ -1363,63 +1380,64 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, os.disk > D_INCONSISTENT && ns.disk == D_INCONSISTENT) drbd_queue_bitmap_io(mdev, &drbd_bmio_set_n_write, NULL, "set_n_write from invalidate"); - /* first half of local IO error */ - if (os.disk > D_FAILED && ns.disk == D_FAILED) { - enum drbd_io_error_p eh = EP_PASS_ON; + /* first half of local IO error, failure to attach, + * or administrative detach */ + if (os.disk != D_FAILED && ns.disk == D_FAILED) { + enum drbd_io_error_p eh; + int was_io_error; + /* corresponding get_ldev was in __drbd_set_state, to serialize + * our cleanup here with the transition to D_DISKLESS, + * so it is safe to dreference ldev here. */ + eh = mdev->ldev->dc.on_io_error; + was_io_error = test_and_clear_bit(WAS_IO_ERROR, &mdev->flags); + + /* current state still has to be D_FAILED, + * there is only one way out: to D_DISKLESS, + * and that may only happen after our put_ldev below. */ + if (mdev->state.disk != D_FAILED) + dev_err(DEV, + "ASSERT FAILED: disk is %s during detach\n", + drbd_disk_str(mdev->state.disk)); if (drbd_send_state(mdev)) - dev_warn(DEV, "Notified peer that my disk is broken.\n"); + dev_warn(DEV, "Notified peer that I am detaching my disk\n"); else - dev_err(DEV, "Sending state for drbd_io_error() failed\n"); + dev_err(DEV, "Sending state for detaching disk failed\n"); drbd_rs_cancel_all(mdev); - if (get_ldev_if_state(mdev, D_FAILED)) { - eh = mdev->ldev->dc.on_io_error; - put_ldev(mdev); - } - if (eh == EP_CALL_HELPER) + /* In case we want to get something to stable storage still, + * this may be the last chance. + * Following put_ldev may transition to D_DISKLESS. */ + drbd_md_sync(mdev); + put_ldev(mdev); + + if (was_io_error && eh == EP_CALL_HELPER) drbd_khelper(mdev, "local-io-error"); } + /* second half of local IO error, failure to attach, + * or administrative detach, + * after local_cnt references have reached zero again */ + if (os.disk != D_DISKLESS && ns.disk == D_DISKLESS) { + /* We must still be diskless, + * re-attach has to be serialized with this! */ + if (mdev->state.disk != D_DISKLESS) + dev_err(DEV, + "ASSERT FAILED: disk is %s while going diskless\n", + drbd_disk_str(mdev->state.disk)); - /* second half of local IO error handling, - * after local_cnt references have reached zero: */ - if (os.disk == D_FAILED && ns.disk == D_DISKLESS) { - mdev->rs_total = 0; - mdev->rs_failed = 0; - atomic_set(&mdev->rs_pending_cnt, 0); - } - - if (os.disk > D_DISKLESS && ns.disk == D_DISKLESS) { - /* We must still be diskless, - * re-attach has to be serialized with this! */ - if (mdev->state.disk != D_DISKLESS) - dev_err(DEV, - "ASSERT FAILED: disk is %s while going diskless\n", - drbd_disk_str(mdev->state.disk)); + mdev->rs_total = 0; + mdev->rs_failed = 0; + atomic_set(&mdev->rs_pending_cnt, 0); - /* we cannot assert local_cnt == 0 here, as get_ldev_if_state - * will inc/dec it frequently. Since we became D_DISKLESS, no - * one has touched the protected members anymore, though, so we - * are safe to free them here. */ if (drbd_send_state(mdev)) - dev_warn(DEV, "Notified peer that I detached my disk.\n"); + dev_warn(DEV, "Notified peer that I'm now diskless.\n"); else - dev_err(DEV, "Sending state for detach failed\n"); - - lc_destroy(mdev->resync); - mdev->resync = NULL; - lc_destroy(mdev->act_log); - mdev->act_log = NULL; - __no_warn(local, - drbd_free_bc(mdev->ldev); - mdev->ldev = NULL;); - - if (mdev->md_io_tmpp) { - __free_page(mdev->md_io_tmpp); - mdev->md_io_tmpp = NULL; - } + dev_err(DEV, "Sending state for being diskless failed\n"); + /* corresponding get_ldev in __drbd_set_state + * this may finaly trigger drbd_ldev_destroy. */ + put_ldev(mdev); } /* Disks got bigger while they were detached */ @@ -2897,7 +2915,6 @@ void drbd_mdev_cleanup(struct drbd_conf *mdev) D_ASSERT(list_empty(&mdev->resync_work.list)); D_ASSERT(list_empty(&mdev->unplug_work.list)); D_ASSERT(list_empty(&mdev->go_diskless.list)); - } @@ -3756,19 +3773,31 @@ static int w_bitmap_io(struct drbd_conf *mdev, struct drbd_work *w, int unused) return 1; } +void drbd_ldev_destroy(struct drbd_conf *mdev) +{ + lc_destroy(mdev->resync); + mdev->resync = NULL; + lc_destroy(mdev->act_log); + mdev->act_log = NULL; + __no_warn(local, + drbd_free_bc(mdev->ldev); + mdev->ldev = NULL;); + + if (mdev->md_io_tmpp) { + __free_page(mdev->md_io_tmpp); + mdev->md_io_tmpp = NULL; + } + clear_bit(GO_DISKLESS, &mdev->flags); +} + static int w_go_diskless(struct drbd_conf *mdev, struct drbd_work *w, int unused) { D_ASSERT(mdev->state.disk == D_FAILED); /* we cannot assert local_cnt == 0 here, as get_ldev_if_state will * inc/dec it frequently. Once we are D_DISKLESS, no one will touch - * the protected members anymore, though, so in the after_state_ch work - * it will be safe to free them. */ + * the protected members anymore, though, so once put_ldev reaches zero + * again, it will be safe to free them. */ drbd_force_state(mdev, NS(disk, D_DISKLESS)); - /* We need to wait for return of references checked out while we still - * have been D_FAILED, though (drbd_md_sync, bitmap io). */ - wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt)); - - clear_bit(GO_DISKLESS, &mdev->flags); return 1; } @@ -3777,9 +3806,6 @@ void drbd_go_diskless(struct drbd_conf *mdev) D_ASSERT(mdev->state.disk == D_FAILED); if (!test_and_set_bit(GO_DISKLESS, &mdev->flags)) drbd_queue_work(&mdev->data.work, &mdev->go_diskless); - /* don't drbd_queue_work_front, - * we need to serialize with the after_state_ch work - * of the -> D_FAILED transition. */ } /** diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index c498c48..0cba7d3 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -870,6 +870,11 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp retcode = ERR_DISK_CONFIGURED; goto fail; } + /* It may just now have detached because of IO error. Make sure + * drbd_ldev_destroy is done already, we may end up here very fast, + * e.g. if someone calls attach from the on-io-error handler, + * to realize a "hot spare" feature (not that I'd recommend that) */ + wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt)); /* allocation not in the IO path, cqueue thread context */ nbc = kzalloc(sizeof(struct drbd_backing_dev), GFP_KERNEL); @@ -1262,7 +1267,7 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp force_diskless_dec: put_ldev(mdev); force_diskless: - drbd_force_state(mdev, NS(disk, D_DISKLESS)); + drbd_force_state(mdev, NS(disk, D_FAILED)); drbd_md_sync(mdev); release_bdev2_fail: if (nbc) @@ -1285,10 +1290,19 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp return 0; } +/* Detaching the disk is a process in multiple stages. First we need to lock + * out application IO, in-flight IO, IO stuck in drbd_al_begin_io. + * Then we transition to D_DISKLESS, and wait for put_ldev() to return all + * internal references as well. + * Only then we have finally detached. */ static int drbd_nl_detach(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp, struct drbd_nl_cfg_reply *reply) { + drbd_suspend_io(mdev); /* so no-one is stuck in drbd_al_begin_io */ reply->ret_code = drbd_request_state(mdev, NS(disk, D_DISKLESS)); + if (mdev->state.disk == D_DISKLESS) + wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt)); + drbd_resume_io(mdev); return 0; } diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 6ec922c..04a823b 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -3363,7 +3363,7 @@ static int receive_state(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned if (ns.conn == C_MASK) { ns.conn = C_CONNECTED; if (mdev->state.disk == D_NEGOTIATING) { - drbd_force_state(mdev, NS(disk, D_DISKLESS)); + drbd_force_state(mdev, NS(disk, D_FAILED)); } else if (peer_state.disk == D_NEGOTIATING) { dev_err(DEV, "Disk attach process on the peer node was aborted.\n"); peer_state.disk = D_DISKLESS; -- cgit v0.10.2 From 6719fb036cea56a5ee9d0ac912ed8c7cabb27f49 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Mon, 18 Oct 2010 23:04:07 +0200 Subject: drbd: fix potential data divergence after multiple failures If we get an IO-error during an activity log transaction, if we failed to write the bitmap of the evicted extent, we must not write the transaction itself. If we failed to write the transaction, we must not even submit the corresponding bio, as its extent is not yet marked in the activity log. Otherwise, if this was a disconneted Primary (degraded cluster), which now lost its disk as well, and we later re-attach the same backend storage, we possibly "forget" to resync some parts of the disk that potentially have been changed. On the receiving side, when receiving from a peer with unhealthy disk, checking for pdsk == D_DISKLESS is not enough, we need to set out of sync and do AL transactions for everything pdsk < D_INCONSISTENT on the receiving side. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c index ac04ef9..bd92518 100644 --- a/drivers/block/drbd/drbd_actlog.c +++ b/drivers/block/drbd/drbd_actlog.c @@ -284,18 +284,32 @@ w_al_write_transaction(struct drbd_conf *mdev, struct drbd_work *w, int unused) u32 xor_sum = 0; if (!get_ldev(mdev)) { - dev_err(DEV, "get_ldev() failed in w_al_write_transaction\n"); + dev_err(DEV, + "disk is %s, cannot start al transaction (-%d +%d)\n", + drbd_disk_str(mdev->state.disk), evicted, new_enr); complete(&((struct update_al_work *)w)->event); return 1; } /* do we have to do a bitmap write, first? * TODO reduce maximum latency: * submit both bios, then wait for both, - * instead of doing two synchronous sector writes. */ + * instead of doing two synchronous sector writes. + * For now, we must not write the transaction, + * if we cannot write out the bitmap of the evicted extent. */ if (mdev->state.conn < C_CONNECTED && evicted != LC_FREE) drbd_bm_write_sect(mdev, evicted/AL_EXT_PER_BM_SECT); - mutex_lock(&mdev->md_io_mutex); /* protects md_io_page, al_tr_cycle, ... */ + /* The bitmap write may have failed, causing a state change. */ + if (mdev->state.disk < D_INCONSISTENT) { + dev_err(DEV, + "disk is %s, cannot write al transaction (-%d +%d)\n", + drbd_disk_str(mdev->state.disk), evicted, new_enr); + complete(&((struct update_al_work *)w)->event); + put_ldev(mdev); + return 1; + } + + mutex_lock(&mdev->md_io_mutex); /* protects md_io_buffer, al_tr_cycle, ... */ buffer = (struct al_transaction *)page_address(mdev->md_io_page); buffer->magic = __constant_cpu_to_be32(DRBD_MAGIC); @@ -739,7 +753,7 @@ void drbd_al_apply_to_bm(struct drbd_conf *mdev) unsigned int enr; unsigned long add = 0; char ppb[10]; - int i; + int i, tmp; wait_event(mdev->al_wait, lc_try_lock(mdev->act_log)); @@ -747,7 +761,9 @@ void drbd_al_apply_to_bm(struct drbd_conf *mdev) enr = lc_element_by_index(mdev->act_log, i)->lc_number; if (enr == LC_FREE) continue; - add += drbd_bm_ALe_set_all(mdev, enr); + tmp = drbd_bm_ALe_set_all(mdev, enr); + dynamic_dev_dbg(DEV, "AL: set %d bits in extent %u\n", tmp, enr); + add += tmp; } lc_unlock(mdev->act_log); diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 04a823b..1146faa 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -1995,10 +1995,11 @@ static int receive_Data(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned break; } - if (mdev->state.pdsk == D_DISKLESS) { + if (mdev->state.pdsk < D_INCONSISTENT) { /* In case we have the only disk of the cluster, */ drbd_set_out_of_sync(mdev, e->sector, e->size); e->flags |= EE_CALL_AL_COMPLETE_IO; + e->flags &= ~EE_MAY_SET_IN_SYNC; drbd_al_begin_io(mdev, e->sector); } diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index 9e91a25..d26b213 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -942,12 +942,21 @@ allocate_barrier: if (local) { req->private_bio->bi_bdev = mdev->ldev->backing_bdev; - if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR - : rw == READ ? DRBD_FAULT_DT_RD - : DRBD_FAULT_DT_RA)) + /* State may have changed since we grabbed our reference on the + * mdev->ldev member. Double check, and short-circuit to endio. + * In case the last activity log transaction failed to get on + * stable storage, and this is a WRITE, we may not even submit + * this bio. */ + if (get_ldev(mdev)) { + if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR + : rw == READ ? DRBD_FAULT_DT_RD + : DRBD_FAULT_DT_RA)) + bio_endio(req->private_bio, -EIO); + else + generic_make_request(req->private_bio); + put_ldev(mdev); + } else bio_endio(req->private_bio, -EIO); - else - generic_make_request(req->private_bio); } /* we need to plug ALWAYS since we possibly need to kick lo_dev. -- cgit v0.10.2 From bc571b8cb930ea78207851dd38b5a435fcb8891c Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Thu, 21 Oct 2010 18:07:31 +0200 Subject: drbd: fix a misleading printk This codepath used to be called only for failed kmalloc GFP_ATOMIC, but is now also triggered by other things. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c index 108d580..1a2d2f0 100644 --- a/drivers/block/drbd/drbd_worker.c +++ b/drivers/block/drbd/drbd_worker.c @@ -925,7 +925,7 @@ out: drbd_md_sync(mdev); if (test_and_clear_bit(WRITE_BM_AFTER_RESYNC, &mdev->flags)) { - dev_warn(DEV, "Writing the whole bitmap, due to failed kmalloc\n"); + dev_info(DEV, "Writing the whole bitmap\n"); drbd_queue_bitmap_io(mdev, &drbd_bm_write, NULL, "write from resync_finished"); } -- cgit v0.10.2 From fb2c7a10eec051317ff091b2cb2d73c5ecd98c19 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Tue, 19 Oct 2010 12:08:13 +0200 Subject: drbd: rate limit an error message If we don't rate limit it, and you happen to log err level messages via serial console, an IO error on a disconnected Primary may cause serious unresponsiveness. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index d26b213..31d04b1 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -813,7 +813,8 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio) mdev->state.conn >= C_CONNECTED)); if (!(local || remote) && !is_susp(mdev->state)) { - dev_err(DEV, "IO ERROR: neither local nor remote disk\n"); + if (__ratelimit(&drbd_ratelimit_state)) + dev_err(DEV, "IO ERROR: neither local nor remote disk\n"); goto fail_free_complete; } -- cgit v0.10.2 From 8825f7c3e5c7b251b49fc594658a96f59417ee16 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Thu, 21 Oct 2010 17:21:19 +0200 Subject: drbd: Silenced an assert That assertion's condition needed adjustment for today's semantics Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index 31d04b1..5c22548 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -258,7 +258,7 @@ void _req_may_be_done(struct drbd_request *req, struct bio_and_error *m) if (!hlist_unhashed(&req->colision)) hlist_del(&req->colision); else - D_ASSERT((s & RQ_NET_MASK) == 0); + D_ASSERT((s & (RQ_NET_MASK & ~RQ_NET_DONE)) == 0); /* for writes we need to do some extra housekeeping */ if (rw == WRITE) diff --git a/include/linux/drbd.h b/include/linux/drbd.h index 9b2a015..ef44c7a 100644 --- a/include/linux/drbd.h +++ b/include/linux/drbd.h @@ -53,7 +53,7 @@ extern const char *drbd_buildtag(void); -#define REL_VERSION "8.3.9rc2" +#define REL_VERSION "8.3.9" #define API_VERSION 88 #define PRO_VERSION_MIN 86 #define PRO_VERSION_MAX 95 -- cgit v0.10.2 From 2451fc3b2bd3a7205270da75a21dde0d5d7c96a2 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Tue, 24 Aug 2010 13:43:11 +0200 Subject: drbd: Removed the BIO_RW_BARRIER support form the receiver/epoch code Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 03c15e3..1b915fd 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -749,17 +749,12 @@ struct drbd_epoch { /* drbd_epoch flag bits */ enum { - DE_BARRIER_IN_NEXT_EPOCH_ISSUED, - DE_BARRIER_IN_NEXT_EPOCH_DONE, - DE_CONTAINS_A_BARRIER, DE_HAVE_BARRIER_NUMBER, - DE_IS_FINISHING, }; enum epoch_event { EV_PUT, EV_GOT_BARRIER_NR, - EV_BARRIER_DONE, EV_BECAME_LAST, EV_CLEANUP = 32, /* used as flag */ }; @@ -801,11 +796,6 @@ enum { __EE_CALL_AL_COMPLETE_IO, __EE_MAY_SET_IN_SYNC, - /* This epoch entry closes an epoch using a barrier. - * On sucessful completion, the epoch is released, - * and the P_BARRIER_ACK send. */ - __EE_IS_BARRIER, - /* In case a barrier failed, * we need to resubmit without the barrier flag. */ __EE_RESUBMITTED, @@ -820,7 +810,6 @@ enum { }; #define EE_CALL_AL_COMPLETE_IO (1<<__EE_CALL_AL_COMPLETE_IO) #define EE_MAY_SET_IN_SYNC (1<<__EE_MAY_SET_IN_SYNC) -#define EE_IS_BARRIER (1<<__EE_IS_BARRIER) #define EE_RESUBMITTED (1<<__EE_RESUBMITTED) #define EE_WAS_ERROR (1<<__EE_WAS_ERROR) #define EE_HAS_DIGEST (1<<__EE_HAS_DIGEST) @@ -948,7 +937,6 @@ enum write_ordering_e { WO_none, WO_drain_io, WO_bdev_flush, - WO_bio_barrier }; struct fifo_buffer { diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 992c3ae..8e0d707 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -2858,7 +2858,7 @@ void drbd_init_set_defaults(struct drbd_conf *mdev) drbd_thread_init(mdev, &mdev->asender, drbd_asender); mdev->agreed_pro_version = PRO_VERSION_MAX; - mdev->write_ordering = WO_bio_barrier; + mdev->write_ordering = WO_bdev_flush; mdev->resync_wenr = LC_FREE; } diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index 0cba7d3..899878f 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -1117,8 +1117,8 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp nbc = NULL; resync_lru = NULL; - mdev->write_ordering = WO_bio_barrier; - drbd_bump_write_ordering(mdev, WO_bio_barrier); + mdev->write_ordering = WO_bdev_flush; + drbd_bump_write_ordering(mdev, WO_bdev_flush); if (drbd_md_test_flag(mdev->ldev, MDF_CRASHED_PRIMARY)) set_bit(CRASHED_PRIMARY, &mdev->flags); diff --git a/drivers/block/drbd/drbd_proc.c b/drivers/block/drbd/drbd_proc.c index ad325c5..7e6ac30 100644 --- a/drivers/block/drbd/drbd_proc.c +++ b/drivers/block/drbd/drbd_proc.c @@ -158,7 +158,6 @@ static int drbd_seq_show(struct seq_file *seq, void *v) [WO_none] = 'n', [WO_drain_io] = 'd', [WO_bdev_flush] = 'f', - [WO_bio_barrier] = 'b', }; seq_printf(seq, "version: " REL_VERSION " (api:%d/proto:%d-%d)\n%s\n", diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 1146faa..2952c12 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -49,11 +49,6 @@ #include "drbd_vli.h" -struct flush_work { - struct drbd_work w; - struct drbd_epoch *epoch; -}; - enum finish_epoch { FE_STILL_LIVE, FE_DESTROYED, @@ -66,16 +61,6 @@ static int drbd_do_auth(struct drbd_conf *mdev); static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *, struct drbd_epoch *, enum epoch_event); static int e_end_block(struct drbd_conf *, struct drbd_work *, int); -static struct drbd_epoch *previous_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch) -{ - struct drbd_epoch *prev; - spin_lock(&mdev->epoch_lock); - prev = list_entry(epoch->list.prev, struct drbd_epoch, list); - if (prev == epoch || prev == mdev->current_epoch) - prev = NULL; - spin_unlock(&mdev->epoch_lock); - return prev; -} #define GFP_TRY (__GFP_HIGHMEM | __GFP_NOWARN) @@ -981,7 +966,7 @@ static int drbd_recv_header(struct drbd_conf *mdev, enum drbd_packets *cmd, unsi return TRUE; } -static enum finish_epoch drbd_flush_after_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch) +static void drbd_flush(struct drbd_conf *mdev) { int rv; @@ -997,24 +982,6 @@ static enum finish_epoch drbd_flush_after_epoch(struct drbd_conf *mdev, struct d } put_ldev(mdev); } - - return drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE); -} - -static int w_flush(struct drbd_conf *mdev, struct drbd_work *w, int cancel) -{ - struct flush_work *fw = (struct flush_work *)w; - struct drbd_epoch *epoch = fw->epoch; - - kfree(w); - - if (!test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags)) - drbd_flush_after_epoch(mdev, epoch); - - drbd_may_finish_epoch(mdev, epoch, EV_PUT | - (mdev->state.conn < C_CONNECTED ? EV_CLEANUP : 0)); - - return 1; } /** @@ -1027,15 +994,13 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch, enum epoch_event ev) { - int finish, epoch_size; + int epoch_size; struct drbd_epoch *next_epoch; - int schedule_flush = 0; enum finish_epoch rv = FE_STILL_LIVE; spin_lock(&mdev->epoch_lock); do { next_epoch = NULL; - finish = 0; epoch_size = atomic_read(&epoch->epoch_size); @@ -1045,16 +1010,6 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev, break; case EV_GOT_BARRIER_NR: set_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags); - - /* Special case: If we just switched from WO_bio_barrier to - WO_bdev_flush we should not finish the current epoch */ - if (test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags) && epoch_size == 1 && - mdev->write_ordering != WO_bio_barrier && - epoch == mdev->current_epoch) - clear_bit(DE_CONTAINS_A_BARRIER, &epoch->flags); - break; - case EV_BARRIER_DONE: - set_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags); break; case EV_BECAME_LAST: /* nothing to do*/ @@ -1063,23 +1018,7 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev, if (epoch_size != 0 && atomic_read(&epoch->active) == 0 && - test_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags) && - epoch->list.prev == &mdev->current_epoch->list && - !test_bit(DE_IS_FINISHING, &epoch->flags)) { - /* Nearly all conditions are met to finish that epoch... */ - if (test_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags) || - mdev->write_ordering == WO_none || - (epoch_size == 1 && test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) || - ev & EV_CLEANUP) { - finish = 1; - set_bit(DE_IS_FINISHING, &epoch->flags); - } else if (!test_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags) && - mdev->write_ordering == WO_bio_barrier) { - atomic_inc(&epoch->active); - schedule_flush = 1; - } - } - if (finish) { + test_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags)) { if (!(ev & EV_CLEANUP)) { spin_unlock(&mdev->epoch_lock); drbd_send_b_ack(mdev, epoch->barrier_nr, epoch_size); @@ -1102,6 +1041,7 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev, /* atomic_set(&epoch->active, 0); is already zero */ if (rv == FE_STILL_LIVE) rv = FE_RECYCLED; + wake_up(&mdev->ee_wait); } } @@ -1113,22 +1053,6 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev, spin_unlock(&mdev->epoch_lock); - if (schedule_flush) { - struct flush_work *fw; - fw = kmalloc(sizeof(*fw), GFP_ATOMIC); - if (fw) { - fw->w.cb = w_flush; - fw->epoch = epoch; - drbd_queue_work(&mdev->data.work, &fw->w); - } else { - dev_warn(DEV, "Could not kmalloc a flush_work obj\n"); - set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags); - /* That is not a recursion, only one level */ - drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE); - drbd_may_finish_epoch(mdev, epoch, EV_PUT); - } - } - return rv; } @@ -1144,19 +1068,16 @@ void drbd_bump_write_ordering(struct drbd_conf *mdev, enum write_ordering_e wo) [WO_none] = "none", [WO_drain_io] = "drain", [WO_bdev_flush] = "flush", - [WO_bio_barrier] = "barrier", }; pwo = mdev->write_ordering; wo = min(pwo, wo); - if (wo == WO_bio_barrier && mdev->ldev->dc.no_disk_barrier) - wo = WO_bdev_flush; if (wo == WO_bdev_flush && mdev->ldev->dc.no_disk_flush) wo = WO_drain_io; if (wo == WO_drain_io && mdev->ldev->dc.no_disk_drain) wo = WO_none; mdev->write_ordering = wo; - if (pwo != mdev->write_ordering || wo == WO_bio_barrier) + if (pwo != mdev->write_ordering || wo == WO_bdev_flush) dev_info(DEV, "Method to ensure write ordering: %s\n", write_ordering_str[mdev->write_ordering]); } @@ -1192,7 +1113,7 @@ next_bio: bio->bi_sector = sector; bio->bi_bdev = mdev->ldev->backing_bdev; /* we special case some flags in the multi-bio case, see below - * (REQ_UNPLUG, REQ_HARDBARRIER) */ + * (REQ_UNPLUG) */ bio->bi_rw = rw; bio->bi_private = e; bio->bi_end_io = drbd_endio_sec; @@ -1226,11 +1147,6 @@ next_bio: bio->bi_rw &= ~REQ_UNPLUG; drbd_generic_make_request(mdev, fault_type, bio); - - /* strip off REQ_HARDBARRIER, - * unless it is the first or last bio */ - if (bios && bios->bi_next) - bios->bi_rw &= ~REQ_HARDBARRIER; } while (bios); maybe_kick_lo(mdev); return 0; @@ -1244,45 +1160,9 @@ fail: return -ENOMEM; } -/** - * w_e_reissue() - Worker callback; Resubmit a bio, without REQ_HARDBARRIER set - * @mdev: DRBD device. - * @w: work object. - * @cancel: The connection will be closed anyways (unused in this callback) - */ -int w_e_reissue(struct drbd_conf *mdev, struct drbd_work *w, int cancel) __releases(local) -{ - struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w; - /* We leave DE_CONTAINS_A_BARRIER and EE_IS_BARRIER in place, - (and DE_BARRIER_IN_NEXT_EPOCH_ISSUED in the previous Epoch) - so that we can finish that epoch in drbd_may_finish_epoch(). - That is necessary if we already have a long chain of Epochs, before - we realize that REQ_HARDBARRIER is actually not supported */ - - /* As long as the -ENOTSUPP on the barrier is reported immediately - that will never trigger. If it is reported late, we will just - print that warning and continue correctly for all future requests - with WO_bdev_flush */ - if (previous_epoch(mdev, e->epoch)) - dev_warn(DEV, "Write ordering was not enforced (one time event)\n"); - - /* we still have a local reference, - * get_ldev was done in receive_Data. */ - - e->w.cb = e_end_block; - if (drbd_submit_ee(mdev, e, WRITE, DRBD_FAULT_DT_WR) != 0) { - /* drbd_submit_ee fails for one reason only: - * if was not able to allocate sufficient bios. - * requeue, try again later. */ - e->w.cb = w_e_reissue; - drbd_queue_work(&mdev->data.work, &e->w); - } - return 1; -} - static int receive_Barrier(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned int data_size) { - int rv, issue_flush; + int rv; struct p_barrier *p = &mdev->data.rbuf.barrier; struct drbd_epoch *epoch; @@ -1300,44 +1180,40 @@ static int receive_Barrier(struct drbd_conf *mdev, enum drbd_packets cmd, unsign * Therefore we must send the barrier_ack after the barrier request was * completed. */ switch (mdev->write_ordering) { - case WO_bio_barrier: case WO_none: if (rv == FE_RECYCLED) return TRUE; - break; + + /* receiver context, in the writeout path of the other node. + * avoid potential distributed deadlock */ + epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO); + if (epoch) + break; + else + dev_warn(DEV, "Allocation of an epoch failed, slowing down\n"); + /* Fall through */ case WO_bdev_flush: case WO_drain_io: - if (rv == FE_STILL_LIVE) { - set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags); - drbd_wait_ee_list_empty(mdev, &mdev->active_ee); - rv = drbd_flush_after_epoch(mdev, mdev->current_epoch); - } - if (rv == FE_RECYCLED) - return TRUE; - - /* The asender will send all the ACKs and barrier ACKs out, since - all EEs moved from the active_ee to the done_ee. We need to - provide a new epoch object for the EEs that come in soon */ - break; - } - - /* receiver context, in the writeout path of the other node. - * avoid potential distributed deadlock */ - epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO); - if (!epoch) { - dev_warn(DEV, "Allocation of an epoch failed, slowing down\n"); - issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags); drbd_wait_ee_list_empty(mdev, &mdev->active_ee); - if (issue_flush) { - rv = drbd_flush_after_epoch(mdev, mdev->current_epoch); - if (rv == FE_RECYCLED) - return TRUE; + drbd_flush(mdev); + + if (atomic_read(&mdev->current_epoch->epoch_size)) { + epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO); + if (epoch) + break; } - drbd_wait_ee_list_empty(mdev, &mdev->done_ee); + epoch = mdev->current_epoch; + wait_event(mdev->ee_wait, atomic_read(&epoch->epoch_size) == 0); + + D_ASSERT(atomic_read(&epoch->active) == 0); + D_ASSERT(epoch->flags == 0); return TRUE; + default: + dev_err(DEV, "Strangeness in mdev->write_ordering %d\n", mdev->write_ordering); + return FALSE; } epoch->flags = 0; @@ -1652,15 +1528,8 @@ static int e_end_block(struct drbd_conf *mdev, struct drbd_work *w, int cancel) { struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w; sector_t sector = e->sector; - struct drbd_epoch *epoch; int ok = 1, pcmd; - if (e->flags & EE_IS_BARRIER) { - epoch = previous_epoch(mdev, e->epoch); - if (epoch) - drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE + (cancel ? EV_CLEANUP : 0)); - } - if (mdev->net_conf->wire_protocol == DRBD_PROT_C) { if (likely((e->flags & EE_WAS_ERROR) == 0)) { pcmd = (mdev->state.conn >= C_SYNC_SOURCE && @@ -1817,27 +1686,6 @@ static int receive_Data(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned e->epoch = mdev->current_epoch; atomic_inc(&e->epoch->epoch_size); atomic_inc(&e->epoch->active); - - if (mdev->write_ordering == WO_bio_barrier && atomic_read(&e->epoch->epoch_size) == 1) { - struct drbd_epoch *epoch; - /* Issue a barrier if we start a new epoch, and the previous epoch - was not a epoch containing a single request which already was - a Barrier. */ - epoch = list_entry(e->epoch->list.prev, struct drbd_epoch, list); - if (epoch == e->epoch) { - set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags); - rw |= REQ_HARDBARRIER; - e->flags |= EE_IS_BARRIER; - } else { - if (atomic_read(&epoch->epoch_size) > 1 || - !test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) { - set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags); - set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags); - rw |= REQ_HARDBARRIER; - e->flags |= EE_IS_BARRIER; - } - } - } spin_unlock(&mdev->epoch_lock); dp_flags = be32_to_cpu(p->dp_flags); diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c index 1a2d2f0..b0551ba 100644 --- a/drivers/block/drbd/drbd_worker.c +++ b/drivers/block/drbd/drbd_worker.c @@ -102,12 +102,6 @@ void drbd_endio_read_sec_final(struct drbd_epoch_entry *e) __releases(local) put_ldev(mdev); } -static int is_failed_barrier(int ee_flags) -{ - return (ee_flags & (EE_IS_BARRIER|EE_WAS_ERROR|EE_RESUBMITTED)) - == (EE_IS_BARRIER|EE_WAS_ERROR); -} - /* writes on behalf of the partner, or resync writes, * "submitted" by the receiver, final stage. */ static void drbd_endio_write_sec_final(struct drbd_epoch_entry *e) __releases(local) @@ -119,21 +113,6 @@ static void drbd_endio_write_sec_final(struct drbd_epoch_entry *e) __releases(lo int is_syncer_req; int do_al_complete_io; - /* if this is a failed barrier request, disable use of barriers, - * and schedule for resubmission */ - if (is_failed_barrier(e->flags)) { - drbd_bump_write_ordering(mdev, WO_bdev_flush); - spin_lock_irqsave(&mdev->req_lock, flags); - list_del(&e->w.list); - e->flags = (e->flags & ~EE_WAS_ERROR) | EE_RESUBMITTED; - e->w.cb = w_e_reissue; - /* put_ldev actually happens below, once we come here again. */ - __release(local); - spin_unlock_irqrestore(&mdev->req_lock, flags); - drbd_queue_work(&mdev->data.work, &e->w); - return; - } - D_ASSERT(e->block_id != ID_VACANT); /* after we moved e to done_ee, -- cgit v0.10.2 From a8a4e51e6965db84d2af041370ea2ab6232aa4f1 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Wed, 25 Aug 2010 10:21:04 +0200 Subject: drbd: REQ_HARDBARRIER -> REQ_FUA transition for meta data accesses Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c index bd92518..ba95cba 100644 --- a/drivers/block/drbd/drbd_actlog.c +++ b/drivers/block/drbd/drbd_actlog.c @@ -78,11 +78,10 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev, init_completion(&md_io.event); md_io.error = 0; - if ((rw & WRITE) && !test_bit(MD_NO_BARRIER, &mdev->flags)) - rw |= REQ_HARDBARRIER; + if ((rw & WRITE) && !test_bit(MD_NO_FUA, &mdev->flags)) + rw |= REQ_FUA; rw |= REQ_UNPLUG | REQ_SYNC; - retry: bio = bio_alloc(GFP_NOIO, 1); bio->bi_bdev = bdev->md_bdev; bio->bi_sector = sector; @@ -100,17 +99,6 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev, wait_for_completion(&md_io.event); ok = bio_flagged(bio, BIO_UPTODATE) && md_io.error == 0; - /* check for unsupported barrier op. - * would rather check on EOPNOTSUPP, but that is not reliable. - * don't try again for ANY return value != 0 */ - if (unlikely((bio->bi_rw & REQ_HARDBARRIER) && !ok)) { - /* Try again with no barrier */ - dev_warn(DEV, "Barriers not supported on meta data device - disabling\n"); - set_bit(MD_NO_BARRIER, &mdev->flags); - rw &= ~REQ_HARDBARRIER; - bio_put(bio); - goto retry; - } out: bio_put(bio); return ok; diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 1b915fd..575bfba 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -835,8 +835,7 @@ enum { NO_BARRIER_SUPP, /* underlying block device doesn't implement barriers */ CONSIDER_RESYNC, - MD_NO_BARRIER, /* meta data device does not support barriers, - so don't even try */ + MD_NO_FUA, /* Users wants us to not use FUA/FLUSH on meta data dev */ SUSPEND_IO, /* suspend application io */ BITMAP_IO, /* suspend application io; once no more io in flight, start bitmap io */ @@ -2404,13 +2403,13 @@ static inline void drbd_md_flush(struct drbd_conf *mdev) { int r; - if (test_bit(MD_NO_BARRIER, &mdev->flags)) + if (test_bit(MD_NO_FUA, &mdev->flags)) return; r = blkdev_issue_flush(mdev->ldev->md_bdev, GFP_KERNEL, NULL, BLKDEV_IFL_WAIT); if (r) { - set_bit(MD_NO_BARRIER, &mdev->flags); + set_bit(MD_NO_FUA, &mdev->flags); dev_err(DEV, "meta data flush failed with status %d, disabling md-flushes\n", r); } } diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index 899878f..29e5c70 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -1103,9 +1103,9 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp /* Reset the "barriers don't work" bits here, then force meta data to * be written, to ensure we determine if barriers are supported. */ if (nbc->dc.no_md_flush) - set_bit(MD_NO_BARRIER, &mdev->flags); + set_bit(MD_NO_FUA, &mdev->flags); else - clear_bit(MD_NO_BARRIER, &mdev->flags); + clear_bit(MD_NO_FUA, &mdev->flags); /* Point of no return reached. * Devices and memory are no longer released by error cleanup below. -- cgit v0.10.2 From 650789c87f16dcdf1dd0a67ac7461b7537534855 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Wed, 25 Aug 2010 10:47:17 +0200 Subject: drbd: Removed checks for REQ_HARDBARRIER on incomming BIOs Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 575bfba..0c527d2 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -832,7 +832,6 @@ enum { * Gets cleared when the state.conn * goes into C_CONNECTED state. */ WRITE_BM_AFTER_RESYNC, /* A kmalloc() during resync failed */ - NO_BARRIER_SUPP, /* underlying block device doesn't implement barriers */ CONSIDER_RESYNC, MD_NO_FUA, /* Users wants us to not use FUA/FLUSH on meta data dev */ diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 8e0d707..d7072bf 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -2788,11 +2788,6 @@ void drbd_init_set_defaults(struct drbd_conf *mdev) drbd_set_defaults(mdev); - /* for now, we do NOT yet support it, - * even though we start some framework - * to eventually support barriers */ - set_bit(NO_BARRIER_SUPP, &mdev->flags); - atomic_set(&mdev->ap_bio_cnt, 0); atomic_set(&mdev->ap_pending_cnt, 0); atomic_set(&mdev->rs_pending_cnt, 0); diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index 5c22548..11a75d3 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -1032,20 +1032,6 @@ int drbd_make_request_26(struct request_queue *q, struct bio *bio) return 0; } - /* Reject barrier requests if we know the underlying device does - * not support them. - * XXX: Need to get this info from peer as well some how so we - * XXX: reject if EITHER side/data/metadata area does not support them. - * - * because of those XXX, this is not yet enabled, - * i.e. in drbd_init_set_defaults we set the NO_BARRIER_SUPP bit. - */ - if (unlikely(bio->bi_rw & REQ_HARDBARRIER) && test_bit(NO_BARRIER_SUPP, &mdev->flags)) { - /* dev_warn(DEV, "Rejecting barrier request as underlying device does not support\n"); */ - bio_endio(bio, -EOPNOTSUPP); - return 0; - } - /* * what we "blindly" assume: */ -- cgit v0.10.2 From afa842fa641e11a025725883b04d1e144e6bad39 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Fri, 22 Oct 2010 14:21:07 -0500 Subject: cciss: fix board status waiting code After a reset, we should first wait for the board to become "not ready", and then wait for it to become "ready", instead of immediately waiting for it to become "ready", and do this waiting *after* restoring PCI config space registers. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index f09e6df..fd08644 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -4006,18 +4006,31 @@ static int __devinit cciss_pci_find_memory_BAR(struct pci_dev *pdev, return -ENODEV; } -static int __devinit cciss_wait_for_board_ready(ctlr_info_t *h) +static int __devinit cciss_wait_for_board_state(struct pci_dev *pdev, + void __iomem *vaddr, int wait_for_ready) +#define BOARD_READY 1 +#define BOARD_NOT_READY 0 { - int i; + int i, iterations; u32 scratchpad; - for (i = 0; i < CCISS_BOARD_READY_ITERATIONS; i++) { - scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); - if (scratchpad == CCISS_FIRMWARE_READY) - return 0; + if (wait_for_ready) + iterations = CCISS_BOARD_READY_ITERATIONS; + else + iterations = CCISS_BOARD_NOT_READY_ITERATIONS; + + for (i = 0; i < iterations; i++) { + scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET); + if (wait_for_ready) { + if (scratchpad == CCISS_FIRMWARE_READY) + return 0; + } else { + if (scratchpad != CCISS_FIRMWARE_READY) + return 0; + } msleep(CCISS_BOARD_READY_POLL_INTERVAL_MSECS); } - dev_warn(&h->pdev->dev, "board not ready, timed out.\n"); + dev_warn(&pdev->dev, "board not ready, timed out.\n"); return -ENODEV; } @@ -4183,7 +4196,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *h) err = -ENOMEM; goto err_out_free_res; } - err = cciss_wait_for_board_ready(h); + err = cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY); if (err) goto err_out_free_res; err = cciss_find_cfgtables(h); @@ -4534,6 +4547,20 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev) need a little pause here */ msleep(CCISS_POST_RESET_PAUSE_MSECS); + /* Wait for board to become not ready, then ready. */ + dev_info(&pdev->dev, "Waiting for board to become ready.\n"); + rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY); + if (rc) /* Don't bail, might be E500, etc. which can't be reset */ + dev_warn(&pdev->dev, + "failed waiting for board to become not ready\n"); + rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_READY); + if (rc) { + dev_warn(&pdev->dev, + "failed waiting for board to become ready\n"); + goto unmap_cfgtable; + } + dev_info(&pdev->dev, "board ready.\n"); + /* Controller should be in simple mode at this point. If it's not, * It means we're on one of those controllers which doesn't support * the doorbell reset method and on which the PCI power management reset diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h index ae340ff..4b8933d 100644 --- a/drivers/block/cciss.h +++ b/drivers/block/cciss.h @@ -200,10 +200,14 @@ struct ctlr_info * the above. */ #define CCISS_BOARD_READY_WAIT_SECS (120) +#define CCISS_BOARD_NOT_READY_WAIT_SECS (10) #define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100) #define CCISS_BOARD_READY_ITERATIONS \ ((CCISS_BOARD_READY_WAIT_SECS * 1000) / \ CCISS_BOARD_READY_POLL_INTERVAL_MSECS) +#define CCISS_BOARD_NOT_READY_ITERATIONS \ + ((CCISS_BOARD_NOT_READY_WAIT_SECS * 1000) / \ + CCISS_BOARD_READY_POLL_INTERVAL_MSECS) #define CCISS_POST_RESET_PAUSE_MSECS (3000) #define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (1000) #define CCISS_POST_RESET_NOOP_RETRIES (12) -- cgit v0.10.2 From f442e64b93e16dba6bf9ab7e8dc5a90f6bcd8a85 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Fri, 22 Oct 2010 14:21:12 -0500 Subject: cciss: Use kernel provided PCI state save and restore functions and use the doorbell reset method if available (which doesn't lock up the controller if you properly save and restore all the PCI registers that you're supposed to.) Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index fd08644..2e547bd 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -4361,36 +4361,6 @@ static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, u #define cciss_soft_reset_controller(p) cciss_message(p, 1, 0) #define cciss_noop(p) cciss_message(p, 3, 0) -static __devinit int cciss_reset_msi(struct pci_dev *pdev) -{ -/* the #defines are stolen from drivers/pci/msi.h. */ -#define msi_control_reg(base) (base + PCI_MSI_FLAGS) -#define PCI_MSIX_FLAGS_ENABLE (1 << 15) - - int pos; - u16 control = 0; - - pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); - if (pos) { - pci_read_config_word(pdev, msi_control_reg(pos), &control); - if (control & PCI_MSI_FLAGS_ENABLE) { - dev_info(&pdev->dev, "resetting MSI\n"); - pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE); - } - } - - pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); - if (pos) { - pci_read_config_word(pdev, msi_control_reg(pos), &control); - if (control & PCI_MSIX_FLAGS_ENABLE) { - dev_info(&pdev->dev, "resetting MSI-X\n"); - pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE); - } - } - - return 0; -} - static int cciss_controller_hard_reset(struct pci_dev *pdev, void * __iomem vaddr, bool use_doorbell) { @@ -4445,17 +4415,17 @@ static int cciss_controller_hard_reset(struct pci_dev *pdev, * states or using the doorbell register. */ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev) { - u16 saved_config_space[32]; u64 cfg_offset; u32 cfg_base_addr; u64 cfg_base_addr_index; void __iomem *vaddr; unsigned long paddr; u32 misc_fw_support, active_transport; - int rc, i; + int rc; CfgTable_struct __iomem *cfgtable; bool use_doorbell; u32 board_id; + u16 command_register; /* For controllers as old a the p600, this is very nearly * the same thing as @@ -4465,14 +4435,6 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev) * pci_set_power_state(pci_dev, PCI_D0); * pci_restore_state(pci_dev); * - * but we can't use these nice canned kernel routines on - * kexec, because they also check the MSI/MSI-X state in PCI - * configuration space and do the wrong thing when it is - * set/cleared. Also, the pci_save/restore_state functions - * violate the ordering requirements for restoring the - * configuration space from the CCISS document (see the - * comment below). So we roll our own .... - * * For controllers newer than the P600, the pci power state * method of resetting doesn't work so we have another way * using the doorbell register. @@ -4491,8 +4453,13 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev) return -ENODEV; } - for (i = 0; i < 32; i++) - pci_read_config_word(pdev, 2*i, &saved_config_space[i]); + /* Save the PCI command register */ + pci_read_config_word(pdev, 4, &command_register); + /* Turn the board off. This is so that later pci_restore_state() + * won't turn the board on before the rest of config space is ready. + */ + pci_disable_device(pdev); + pci_save_state(pdev); /* find the first memory BAR, so we can find the cfg table */ rc = cciss_pci_find_memory_BAR(pdev, &paddr); @@ -4527,21 +4494,13 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev) rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell); if (rc) goto unmap_cfgtable; - - /* Restore the PCI configuration space. The Open CISS - * Specification says, "Restore the PCI Configuration - * Registers, offsets 00h through 60h. It is important to - * restore the command register, 16-bits at offset 04h, - * last. Do not restore the configuration status register, - * 16-bits at offset 06h." Note that the offset is 2*i. - */ - for (i = 0; i < 32; i++) { - if (i == 2 || i == 3) - continue; - pci_write_config_word(pdev, 2*i, saved_config_space[i]); + pci_restore_state(pdev); + rc = pci_enable_device(pdev); + if (rc) { + dev_warn(&pdev->dev, "failed to enable device.\n"); + goto unmap_cfgtable; } - wmb(); - pci_write_config_word(pdev, 4, saved_config_space[2]); + pci_write_config_word(pdev, 4, command_register); /* Some devices (notably the HP Smart Array 5i Controller) need a little pause here */ @@ -4601,8 +4560,6 @@ static __devinit int cciss_init_reset_devices(struct pci_dev *pdev) return 0; /* just try to do the kdump anyhow. */ if (rc) return -ENODEV; - if (cciss_reset_msi(pdev)) - return -ENODEV; /* Now try to get the controller to respond to a no-op */ for (i = 0; i < CCISS_POST_RESET_NOOP_RETRIES; i++) { -- cgit v0.10.2 From 186fb9cf6a1154bc9b071adfd72fcf256285eb26 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Fri, 22 Oct 2010 14:21:17 -0500 Subject: cciss: limit commands allocated on reset_devices This is to conserve memory in a memory-limited kdump scenario Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 2e547bd..9e761b9 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -4079,6 +4079,11 @@ static int __devinit cciss_find_cfgtables(ctlr_info_t *h) static void __devinit cciss_get_max_perf_mode_cmds(struct ctlr_info *h) { h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands)); + + /* Limit commands in memory limited kdump scenario. */ + if (reset_devices && h->max_commands > 32) + h->max_commands = 32; + if (h->max_commands < 16) { dev_warn(&h->pdev->dev, "Controller reports " "max supported commands of %d, an obvious lie. " -- cgit v0.10.2 From 332c2f80a894d349bfb95fae00daf74477d4afcd Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Fri, 22 Oct 2010 14:21:22 -0500 Subject: cciss: use usleep_range not msleep for small sleeps Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 9e761b9..c792a60 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3785,7 +3785,7 @@ static void __devinit cciss_wait_for_mode_change_ack(ctlr_info_t *h) for (i = 0; i < MAX_CONFIG_WAIT; i++) { if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) break; - msleep(10); + usleep_range(10000, 20000); } } -- cgit v0.10.2 From 4205df34003eec4371020872cdfa228ffae5bd6a Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Sat, 23 Oct 2010 18:47:31 +0200 Subject: cciss: remove controllers supported by hpsa We would prefer not to have any overlap between the two drivers. Remove the cciss_allow_hpsa option, as it it is no longer needed. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index c792a60..39631cb 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -66,11 +66,6 @@ MODULE_VERSION("3.6.26"); MODULE_LICENSE("GPL"); static DEFINE_MUTEX(cciss_mutex); -static int cciss_allow_hpsa; -module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(cciss_allow_hpsa, - "Prevent cciss driver from accessing hardware known to be " - " supported by the hpsa driver"); #include "cciss_cmd.h" #include "cciss.h" @@ -98,19 +93,6 @@ static const struct pci_device_id cciss_pci_device_id[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3350}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3351}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3352}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3353}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3354}, - {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3355}, {0,} }; @@ -131,6 +113,8 @@ static struct board_type products[] = { {0x409D0E11, "Smart Array 6400 EM", &SA5_access}, {0x40910E11, "Smart Array 6i", &SA5_access}, {0x3225103C, "Smart Array P600", &SA5_access}, + {0x3223103C, "Smart Array P800", &SA5_access}, + {0x3234103C, "Smart Array P400", &SA5_access}, {0x3235103C, "Smart Array P400i", &SA5_access}, {0x3211103C, "Smart Array E200i", &SA5_access}, {0x3212103C, "Smart Array E200", &SA5_access}, @@ -138,24 +122,7 @@ static struct board_type products[] = { {0x3214103C, "Smart Array E200i", &SA5_access}, {0x3215103C, "Smart Array E200i", &SA5_access}, {0x3237103C, "Smart Array E500", &SA5_access}, -/* controllers below this line are also supported by the hpsa driver. */ -#define HPSA_BOUNDARY 0x3223103C - {0x3223103C, "Smart Array P800", &SA5_access}, - {0x3234103C, "Smart Array P400", &SA5_access}, - {0x323D103C, "Smart Array P700m", &SA5_access}, - {0x3241103C, "Smart Array P212", &SA5_access}, - {0x3243103C, "Smart Array P410", &SA5_access}, - {0x3245103C, "Smart Array P410i", &SA5_access}, - {0x3247103C, "Smart Array P411", &SA5_access}, - {0x3249103C, "Smart Array P812", &SA5_access}, - {0x324A103C, "Smart Array P712m", &SA5_access}, - {0x324B103C, "Smart Array P711m", &SA5_access}, - {0x3350103C, "Smart Array", &SA5_access}, - {0x3351103C, "Smart Array", &SA5_access}, - {0x3352103C, "Smart Array", &SA5_access}, - {0x3353103C, "Smart Array", &SA5_access}, - {0x3354103C, "Smart Array", &SA5_access}, - {0x3355103C, "Smart Array", &SA5_access}, + {0x323d103c, "Smart Array P700M", &SA5_access}, }; /* How long to wait (in milliseconds) for board to go into simple mode */ @@ -3969,13 +3936,9 @@ static int __devinit cciss_lookup_board_id(struct pci_dev *pdev, u32 *board_id) *board_id = ((subsystem_device_id << 16) & 0xffff0000) | subsystem_vendor_id; - for (i = 0; i < ARRAY_SIZE(products); i++) { - /* Stand aside for hpsa driver on request */ - if (cciss_allow_hpsa && products[i].board_id == HPSA_BOUNDARY) - return -ENODEV; + for (i = 0; i < ARRAY_SIZE(products); i++) if (*board_id == products[i].board_id) return i; - } dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x, ignoring.\n", *board_id); return -ENODEV; -- cgit v0.10.2 From 14bd342e25ea0242369c229d33075348171b622b Mon Sep 17 00:00:00 2001 From: Nicolas Kaiser Date: Mon, 25 Oct 2010 19:25:42 -0400 Subject: crypto: n2 - dubious error check Looks like a copy-and-paste problem to me. Signed-off-by: Nicolas Kaiser Acked-by: David S. Miller Signed-off-by: Herbert Xu diff --git a/drivers/crypto/n2_core.c b/drivers/crypto/n2_core.c index 88ee015..7614126 100644 --- a/drivers/crypto/n2_core.c +++ b/drivers/crypto/n2_core.c @@ -1832,7 +1832,7 @@ static int __devinit get_irq_props(struct mdesc_handle *mdesc, u64 node, return -ENODEV; ino = mdesc_get_property(mdesc, node, "ino", &ino_len); - if (!intr) + if (!ino) return -ENODEV; if (intr_len != ino_len) -- cgit v0.10.2 From dd2b379f071424f36f9f90ff83cb4ad058c7b6ed Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 26 Oct 2010 17:14:36 +0100 Subject: drm/i915: Fix typo from "Enable DisplayPort Audio" Hi, while I looked through your changes in drm-intel git tree (as I've got a pressure for supporting DisplayPort audio), I stumbled on the possible bug in the commit a9756bb5b25d5d997df0c5d8c95db01292191bea Author: Zhenyu Wang Date: Sun Sep 19 13:09:06 2010 +0800 drm/i915: Enable DisplayPort audio In this commit, you changed the return value of g4x_dp_detect() to "bit", but it should be "status", I suppose. [ickle: mea culpa.] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31094 Signed-off-by: Chris Wilson diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 891f4f1..c8e0055 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1517,7 +1517,7 @@ g4x_dp_detect(struct intel_dp *intel_dp) status = connector_status_connected; } - return bit; + return status; } /** -- cgit v0.10.2 From 8f28f54aad8bcf52a47afb6447fac34f96597b6f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 27 Oct 2010 23:17:25 +0200 Subject: i915: signedness bug in check_overlay_src() "depth" should be signed in case packed_depth_bytes() returns -EINVAL. This probably doesn't make a difference at runtime. In the original code we would return -EINVAL later if (rec->offset_Y % 4294967274) is non-zero. Signed-off-by: Dan Carpenter Signed-off-by: Chris Wilson diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c index afb96d2..02ff0a4 100644 --- a/drivers/gpu/drm/i915/intel_overlay.c +++ b/drivers/gpu/drm/i915/intel_overlay.c @@ -946,7 +946,9 @@ static int check_overlay_src(struct drm_device *dev, { int uv_hscale = uv_hsubsampling(rec->flags); int uv_vscale = uv_vsubsampling(rec->flags); - u32 stride_mask, depth, tmp; + u32 stride_mask; + int depth; + u32 tmp; /* check src dimensions */ if (IS_845G(dev) || IS_I830(dev)) { -- cgit v0.10.2 From 395b70be54bed5fdf6c4173c78e8a49f960f241d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 28 Oct 2010 21:28:46 +0100 Subject: drm/i915: Flush read-only buffers from the active list upon idle as well It is possible for the active list to only contain a read-only buffer so that the ring->gpu_write_list remains entry. This leads to an inconsistency between i915_gpu_is_active() and i915_gpu_idle() causing an infinite spin during the shrinker and an assertion failure that i915_gpu_idle() does indeed flush all buffers from the active lists. Signed-off-by: Chris Wilson diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 8eb8453..469a5b1 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2172,7 +2172,7 @@ i915_gem_object_unbind(struct drm_gem_object *obj) static int i915_ring_idle(struct drm_device *dev, struct intel_ring_buffer *ring) { - if (list_empty(&ring->gpu_write_list)) + if (list_empty(&ring->gpu_write_list) && list_empty(&ring->active_list)) return 0; i915_gem_flush_ring(dev, NULL, ring, @@ -2190,9 +2190,7 @@ i915_gpu_idle(struct drm_device *dev) int ret; lists_empty = (list_empty(&dev_priv->mm.flushing_list) && - list_empty(&dev_priv->render_ring.active_list) && - list_empty(&dev_priv->bsd_ring.active_list) && - list_empty(&dev_priv->blt_ring.active_list)); + list_empty(&dev_priv->mm.active_list)); if (lists_empty) return 0; @@ -4900,9 +4898,7 @@ i915_gpu_is_active(struct drm_device *dev) int lists_empty; lists_empty = list_empty(&dev_priv->mm.flushing_list) && - list_empty(&dev_priv->render_ring.active_list) && - list_empty(&dev_priv->bsd_ring.active_list) && - list_empty(&dev_priv->blt_ring.active_list); + list_empty(&dev_priv->mm.active_list); return !lists_empty; } diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c index 43a4013..d8ae7d1 100644 --- a/drivers/gpu/drm/i915/i915_gem_evict.c +++ b/drivers/gpu/drm/i915/i915_gem_evict.c @@ -165,9 +165,7 @@ i915_gem_evict_everything(struct drm_device *dev) lists_empty = (list_empty(&dev_priv->mm.inactive_list) && list_empty(&dev_priv->mm.flushing_list) && - list_empty(&dev_priv->render_ring.active_list) && - list_empty(&dev_priv->bsd_ring.active_list) && - list_empty(&dev_priv->blt_ring.active_list)); + list_empty(&dev_priv->mm.active_list)); if (lists_empty) return -ENOSPC; @@ -184,9 +182,7 @@ i915_gem_evict_everything(struct drm_device *dev) lists_empty = (list_empty(&dev_priv->mm.inactive_list) && list_empty(&dev_priv->mm.flushing_list) && - list_empty(&dev_priv->render_ring.active_list) && - list_empty(&dev_priv->bsd_ring.active_list) && - list_empty(&dev_priv->blt_ring.active_list)); + list_empty(&dev_priv->mm.active_list)); BUG_ON(!lists_empty); return 0; -- cgit v0.10.2 From a2d771c036eb8c040683089ca04c36dfb93a0e60 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 29 Oct 2010 16:56:19 +0100 Subject: xen: correct size of level2_kernel_pgt sizeof(pmd_t *) is 4 bytes on 32-bit PAE leading to an allocation of only 2048 bytes. The correct size is sizeof(pmd_t) giving us a full page allocation. Signed-off-by: Ian Campbell Cc: Jeremy Fitzhardinge Signed-off-by: Jeremy Fitzhardinge diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index c237b81..21ed8d7 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -2126,7 +2126,7 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, { pmd_t *kernel_pmd; - level2_kernel_pgt = extend_brk(sizeof(pmd_t *) * PTRS_PER_PMD, PAGE_SIZE); + level2_kernel_pgt = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE); max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) + xen_start_info->nr_pt_frames * PAGE_SIZE + -- cgit v0.10.2 From cf38d0ba7efdc476815768b2b999b27cfae69747 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Mon, 1 Nov 2010 12:53:50 +0600 Subject: x86, mm: Fix section mismatch in tlb.c Mark tlb_cpuhp_notify as __cpuinit. It's basically a callback function, which is called from __cpuinit init_smp_flash(). So - it's safe. We were warned by the following warning: WARNING: arch/x86/mm/built-in.o(.text+0x356d): Section mismatch in reference from the function tlb_cpuhp_notify() to the function .cpuinit.text:calculate_tlb_offset() The function tlb_cpuhp_notify() references the function __cpuinit calculate_tlb_offset(). This is often because tlb_cpuhp_notify lacks a __cpuinit annotation or the annotation of calculate_tlb_offset is wrong. Signed-off-by: Rakib Mullick Cc: Borislav Petkov Cc: Shaohua Li LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index 4935848..12cdbb1 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -251,7 +251,7 @@ static void __cpuinit calculate_tlb_offset(void) } } -static int tlb_cpuhp_notify(struct notifier_block *n, +static int __cpuinit tlb_cpuhp_notify(struct notifier_block *n, unsigned long action, void *hcpu) { switch (action & 0xf) { -- cgit v0.10.2 From 30c56660fc4ba9bad7847ad43bb059d2447001d4 Mon Sep 17 00:00:00 2001 From: Christoph Fritz Date: Mon, 1 Nov 2010 11:32:22 +0100 Subject: drm/i915: opregion_setup: iounmap correct address In case of an opregion signature mismatch in intel_opregion_setup(), iounmap the correct address. Signed-off-by: Christoph Fritz Cc: stable@kernel.org Signed-off-by: Chris Wilson diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c index 917c7dc..9b0d9a8 100644 --- a/drivers/gpu/drm/i915/intel_opregion.c +++ b/drivers/gpu/drm/i915/intel_opregion.c @@ -512,6 +512,6 @@ int intel_opregion_setup(struct drm_device *dev) return 0; err_out: - iounmap(opregion->header); + iounmap(base); return err; } -- cgit v0.10.2 From c6afd658073f9fdb4cc80664dac71fa9db6fdf35 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 1 Nov 2010 13:39:24 +0000 Subject: drm/i915: Apply big hammer to serialise buffer access between rings Signed-off-by: Chris Wilson Cc: stable@kernel.org diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 469a5b1..984eb6e 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3106,7 +3106,8 @@ i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, * write domain */ if (obj->write_domain && - obj->write_domain != obj->pending_read_domains) { + (obj->write_domain != obj->pending_read_domains || + obj_priv->ring != ring)) { flush_domains |= obj->write_domain; invalidate_domains |= obj->pending_read_domains & ~obj->write_domain; @@ -3495,6 +3496,52 @@ i915_gem_execbuffer_pin(struct drm_device *dev, return 0; } +static int +i915_gem_execbuffer_move_to_gpu(struct drm_device *dev, + struct drm_file *file, + struct intel_ring_buffer *ring, + struct drm_gem_object **objects, + int count) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int ret, i; + + /* Zero the global flush/invalidate flags. These + * will be modified as new domains are computed + * for each object + */ + dev->invalidate_domains = 0; + dev->flush_domains = 0; + dev_priv->mm.flush_rings = 0; + for (i = 0; i < count; i++) + i915_gem_object_set_to_gpu_domain(objects[i], ring); + + if (dev->invalidate_domains | dev->flush_domains) { +#if WATCH_EXEC + DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", + __func__, + dev->invalidate_domains, + dev->flush_domains); +#endif + i915_gem_flush(dev, file, + dev->invalidate_domains, + dev->flush_domains, + dev_priv->mm.flush_rings); + } + + for (i = 0; i < count; i++) { + struct drm_i915_gem_object *obj = to_intel_bo(objects[i]); + /* XXX replace with semaphores */ + if (obj->ring && ring != obj->ring) { + ret = i915_gem_object_wait_rendering(&obj->base, true); + if (ret) + return ret; + } + } + + return 0; +} + /* Throttle our rendering by waiting until the ring has completed our requests * emitted over 20 msec ago. * @@ -3755,33 +3802,10 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, goto err; } - /* Zero the global flush/invalidate flags. These - * will be modified as new domains are computed - * for each object - */ - dev->invalidate_domains = 0; - dev->flush_domains = 0; - dev_priv->mm.flush_rings = 0; - - for (i = 0; i < args->buffer_count; i++) { - struct drm_gem_object *obj = object_list[i]; - - /* Compute new gpu domains and update invalidate/flush */ - i915_gem_object_set_to_gpu_domain(obj, ring); - } - - if (dev->invalidate_domains | dev->flush_domains) { -#if WATCH_EXEC - DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", - __func__, - dev->invalidate_domains, - dev->flush_domains); -#endif - i915_gem_flush(dev, file, - dev->invalidate_domains, - dev->flush_domains, - dev_priv->mm.flush_rings); - } + ret = i915_gem_execbuffer_move_to_gpu(dev, file, ring, + object_list, args->buffer_count); + if (ret) + goto err; for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; -- cgit v0.10.2 From 0aa992777270f0ea7097170fa50a1d98615eb0d4 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 2 Nov 2010 09:20:50 +0000 Subject: drm/i915: Allow powersave modparam to be adjusted at runtime. 2.6.36 appears to respect the 0400 mode we assigned to the parameter preventing it from being adjusted after loading. However, this is safe to adjust at runtime. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31311 Reported-by: Fernando Lemos Cc: stable@kernel.org Signed-off-by: Chris Wilson diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 3467dd4..80745f8 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -44,7 +44,7 @@ unsigned int i915_fbpercrtc = 0; module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400); unsigned int i915_powersave = 1; -module_param_named(powersave, i915_powersave, int, 0400); +module_param_named(powersave, i915_powersave, int, 0600); unsigned int i915_lvds_downclock = 0; module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400); -- cgit v0.10.2 From 80dbf4b72b0bcac71fc683914293555edb7bc7ee Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 1 Nov 2010 14:12:01 -0700 Subject: drm/i915: Fix the graphics frequency clamping at init and when IPS is active. Part of the issue here was that Eric slipped in a debug hack for testing the i915 IPS code before the intel_ips.c driver had landed. This caused the driver to always use the full range of frequencies, which is only legal when IPS tells us we have the headroom. Once that hack was removed, there was confusion about the driver's frequency clamping variables: max_delay is the driver's current limit on the highest frequency the IPS driver wants us to use, while dev_priv->fmax is the hardware-reported limit that the IPS driver can increase up to. Tested with IPS driver loaded or not. Note that on Ironlake systems without the IPS driver loaded this will result in a performance reduction, and the inital warmup of frequency limits can impact benchmarking on systems with IPS loaded. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt [ickle: demoted a debugging printk] Cc: stable@kernel.org Signed-off-by: Chris Wilson diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 990f065..528aa06 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5581,20 +5581,19 @@ void ironlake_enable_drps(struct drm_device *dev) fmin = (rgvmodectl & MEMMODE_FMIN_MASK); fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >> MEMMODE_FSTART_SHIFT; - fstart = fmax; vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT; - dev_priv->fmax = fstart; /* IPS callback will increase this */ + dev_priv->fmax = fmax; /* IPS callback will increase this */ dev_priv->fstart = fstart; - dev_priv->max_delay = fmax; + dev_priv->max_delay = fstart; dev_priv->min_delay = fmin; dev_priv->cur_delay = fstart; - DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax, fmin, - fstart); + DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", + fmax, fmin, fstart); I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN); -- cgit v0.10.2 From 5588978882b5f4b81169bd7f9bc941e3a12ee8ba Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 2 Nov 2010 10:38:58 +0000 Subject: drm/i915: SNB BLT workaround On some stepping of SNB cpu, the first command to be parsed in BLT command streamer should be MI_BATCHBUFFER_START otherwise the GPU may hang. (cherry picked from commit 8d19215be8254f4f75e9c5a0d28345947b0382db) Conflicts: drivers/gpu/drm/i915/intel_ringbuffer.c drivers/gpu/drm/i915/intel_ringbuffer.h Signed-off-by: Zou Nan hai Cc: stable@kernel.org Signed-off-by: Chris Wilson diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 09f2dc3..7c1f3ff 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -654,6 +654,10 @@ void intel_cleanup_ring_buffer(struct drm_device *dev, i915_gem_object_unpin(ring->gem_object); drm_gem_object_unreference(ring->gem_object); ring->gem_object = NULL; + + if (ring->cleanup) + ring->cleanup(ring); + cleanup_status_page(dev, ring); } @@ -854,19 +858,125 @@ blt_ring_put_user_irq(struct drm_device *dev, /* do nothing */ } + +/* Workaround for some stepping of SNB, + * each time when BLT engine ring tail moved, + * the first command in the ring to be parsed + * should be MI_BATCH_BUFFER_START + */ +#define NEED_BLT_WORKAROUND(dev) \ + (IS_GEN6(dev) && (dev->pdev->revision < 8)) + +static inline struct drm_i915_gem_object * +to_blt_workaround(struct intel_ring_buffer *ring) +{ + return ring->private; +} + +static int blt_ring_init(struct drm_device *dev, + struct intel_ring_buffer *ring) +{ + if (NEED_BLT_WORKAROUND(dev)) { + struct drm_i915_gem_object *obj; + u32 __iomem *ptr; + int ret; + + obj = to_intel_bo(i915_gem_alloc_object(dev, 4096)); + if (obj == NULL) + return -ENOMEM; + + ret = i915_gem_object_pin(&obj->base, 4096); + if (ret) { + drm_gem_object_unreference(&obj->base); + return ret; + } + + ptr = kmap(obj->pages[0]); + iowrite32(MI_BATCH_BUFFER_END, ptr); + iowrite32(MI_NOOP, ptr+1); + kunmap(obj->pages[0]); + + ret = i915_gem_object_set_to_gtt_domain(&obj->base, false); + if (ret) { + i915_gem_object_unpin(&obj->base); + drm_gem_object_unreference(&obj->base); + return ret; + } + + ring->private = obj; + } + + return init_ring_common(dev, ring); +} + +static void blt_ring_begin(struct drm_device *dev, + struct intel_ring_buffer *ring, + int num_dwords) +{ + if (ring->private) { + intel_ring_begin(dev, ring, num_dwords+2); + intel_ring_emit(dev, ring, MI_BATCH_BUFFER_START); + intel_ring_emit(dev, ring, to_blt_workaround(ring)->gtt_offset); + } else + intel_ring_begin(dev, ring, 4); +} + +static void blt_ring_flush(struct drm_device *dev, + struct intel_ring_buffer *ring, + u32 invalidate_domains, + u32 flush_domains) +{ + blt_ring_begin(dev, ring, 4); + intel_ring_emit(dev, ring, MI_FLUSH_DW); + intel_ring_emit(dev, ring, 0); + intel_ring_emit(dev, ring, 0); + intel_ring_emit(dev, ring, 0); + intel_ring_advance(dev, ring); +} + +static u32 +blt_ring_add_request(struct drm_device *dev, + struct intel_ring_buffer *ring, + u32 flush_domains) +{ + u32 seqno = i915_gem_get_seqno(dev); + + blt_ring_begin(dev, ring, 4); + intel_ring_emit(dev, ring, MI_STORE_DWORD_INDEX); + intel_ring_emit(dev, ring, + I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT); + intel_ring_emit(dev, ring, seqno); + intel_ring_emit(dev, ring, MI_USER_INTERRUPT); + intel_ring_advance(dev, ring); + + DRM_DEBUG_DRIVER("%s %d\n", ring->name, seqno); + return seqno; +} + +static void blt_ring_cleanup(struct intel_ring_buffer *ring) +{ + if (!ring->private) + return; + + i915_gem_object_unpin(ring->private); + drm_gem_object_unreference(ring->private); + ring->private = NULL; +} + static const struct intel_ring_buffer gen6_blt_ring = { .name = "blt ring", .id = RING_BLT, .mmio_base = BLT_RING_BASE, .size = 32 * PAGE_SIZE, - .init = init_ring_common, + .init = blt_ring_init, .write_tail = ring_write_tail, - .flush = gen6_ring_flush, - .add_request = ring_add_request, + .flush = blt_ring_flush, + .add_request = blt_ring_add_request, .get_seqno = ring_status_page_get_seqno, .user_irq_get = blt_ring_get_user_irq, .user_irq_put = blt_ring_put_user_irq, .dispatch_gem_execbuffer = gen6_ring_dispatch_gem_execbuffer, + .cleanup = blt_ring_cleanup, }; int intel_init_render_ring_buffer(struct drm_device *dev) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index a05aff0..3126c26 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -63,6 +63,7 @@ struct intel_ring_buffer { struct drm_i915_gem_execbuffer2 *exec, struct drm_clip_rect *cliprects, uint64_t exec_offset); + void (*cleanup)(struct intel_ring_buffer *ring); /** * List of objects currently involved in rendering from the @@ -98,6 +99,8 @@ struct intel_ring_buffer { wait_queue_head_t irq_queue; drm_local_map_t map; + + void *private; }; static inline u32 -- cgit v0.10.2 From 21b75b019983dfa5c2dda588f4b60b4ca69844a4 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 26 Oct 2010 10:07:17 -0400 Subject: nfsd4: fix 4.1 connection registration race If a connection is closed just after a sequence or create_session is sent over it, we could end up trying to register a callback that will never get called since the xprt is already marked dead. Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index f1e5ec6..ad2bfa6 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -673,16 +673,17 @@ static void nfsd4_hash_conn(struct nfsd4_conn *conn, struct nfsd4_session *ses) spin_unlock(&clp->cl_lock); } -static void nfsd4_register_conn(struct nfsd4_conn *conn) +static int nfsd4_register_conn(struct nfsd4_conn *conn) { conn->cn_xpt_user.callback = nfsd4_conn_lost; - register_xpt_user(conn->cn_xprt, &conn->cn_xpt_user); + return register_xpt_user(conn->cn_xprt, &conn->cn_xpt_user); } static __be32 nfsd4_new_conn(struct svc_rqst *rqstp, struct nfsd4_session *ses) { struct nfsd4_conn *conn; u32 flags = NFS4_CDFC4_FORE; + int ret; if (ses->se_flags & SESSION4_BACK_CHAN) flags |= NFS4_CDFC4_BACK; @@ -690,7 +691,10 @@ static __be32 nfsd4_new_conn(struct svc_rqst *rqstp, struct nfsd4_session *ses) if (!conn) return nfserr_jukebox; nfsd4_hash_conn(conn, ses); - nfsd4_register_conn(conn); + ret = nfsd4_register_conn(conn); + if (ret) + /* oops; xprt is already down: */ + nfsd4_conn_lost(&conn->cn_xpt_user); return nfs_ok; } @@ -1644,6 +1648,7 @@ static void nfsd4_sequence_check_conn(struct nfsd4_conn *new, struct nfsd4_sessi { struct nfs4_client *clp = ses->se_client; struct nfsd4_conn *c; + int ret; spin_lock(&clp->cl_lock); c = __nfsd4_find_conn(new->cn_xprt, ses); @@ -1654,7 +1659,10 @@ static void nfsd4_sequence_check_conn(struct nfsd4_conn *new, struct nfsd4_sessi } __nfsd4_hash_conn(new, ses); spin_unlock(&clp->cl_lock); - nfsd4_register_conn(new); + ret = nfsd4_register_conn(new); + if (ret) + /* oops; xprt is already down: */ + nfsd4_conn_lost(&new->cn_xpt_user); return; } diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index bbdb680..aea0d438 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -82,18 +82,28 @@ struct svc_xprt { struct net *xpt_net; }; -static inline void register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u) +static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u) { spin_lock(&xpt->xpt_lock); - list_add(&u->list, &xpt->xpt_users); + list_del_init(&u->list); spin_unlock(&xpt->xpt_lock); } -static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u) +static inline int register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u) { spin_lock(&xpt->xpt_lock); - list_del_init(&u->list); + if (test_bit(XPT_CLOSE, &xpt->xpt_flags)) { + /* + * The connection is about to be deleted soon (or, + * worse, may already be deleted--in which case we've + * already notified the xpt_users). + */ + spin_unlock(&xpt->xpt_lock); + return -ENOTCONN; + } + list_add(&u->list, &xpt->xpt_users); spin_unlock(&xpt->xpt_lock); + return 0; } int svc_reg_xprt_class(struct svc_xprt_class *); -- cgit v0.10.2 From 3073f0fa2b50808f0a506370e494456d4aa73718 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Fri, 29 Oct 2010 11:32:56 +0800 Subject: ARM: mmp: fix cpuid detection on mmp2 Fix typo error on cpu_is_mmp2(). Correct cpu_readid_id() to read_cpuid_id(). Append missing parenthesis. Signed-off-by: Haojian Zhuang Signed-off-by: Eric Miao diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h index f43a68b..8a3b56d 100644 --- a/arch/arm/mach-mmp/include/mach/cputype.h +++ b/arch/arm/mach-mmp/include/mach/cputype.h @@ -46,7 +46,8 @@ static inline int cpu_is_pxa910(void) #ifdef CONFIG_CPU_MMP2 static inline int cpu_is_mmp2(void) { - return (((cpu_readid_id() >> 8) & 0xff) == 0x58); + return (((read_cpuid_id() >> 8) & 0xff) == 0x58); +} #else #define cpu_is_mmp2() (0) #endif -- cgit v0.10.2 From 12cdcc8523f15051a5a4001de906bcf61acf6c36 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 2 Nov 2010 04:53:59 +0800 Subject: ARM: pxa: fix the missing definition of IRQ_BOARD_END Signed-off-by: Eric Miao Cc: Haojian Zhuang Cc: Mike Rapoport diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index 6700c7f..21fa272 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -75,7 +75,7 @@ extern unsigned long it8152_base_address; IT8152_PD_IRQ(1) USB (USBR) IT8152_PD_IRQ(0) Audio controller (ACR) */ -#define IT8152_IRQ(x) (IRQ_BOARD_END + (x)) +#define IT8152_IRQ(x) (IRQ_BOARD_START + (x)) /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ #define IT8152_LD_IRQ_COUNT 9 -- cgit v0.10.2 From 51e930ae44cb905ba1616add2e3c7f33f0bbbc0e Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sun, 26 Sep 2010 14:37:49 +0200 Subject: ARM: pxa/cm-x2xx: remove duplicate call to pxa27x_init_irq Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index ac5598c..d34b99f 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -476,8 +476,6 @@ static void __init cmx2xx_init(void) static void __init cmx2xx_init_irq(void) { - pxa27x_init_irq(); - if (cpu_is_pxa25x()) { pxa25x_init_irq(); cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ); -- cgit v0.10.2 From 72feb6e7cb55e7947653446e52e54d66134ac1b5 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 2 Nov 2010 21:17:46 +0800 Subject: ARM: pxa/saar: fix the building failure caused by typo Signed-off-by: Eric Miao Cc: Haojian Zhuang diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 4b521e0..ffa50e6 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -116,7 +116,7 @@ static struct platform_device smc91x_device = { }, }; -#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE) +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) static uint16_t lcd_power_on[] = { /* single frame */ SMART_CMD_NOOP, -- cgit v0.10.2 From 95716c0decb2ed3ff94998b6390cc8f8d6d1e748 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 2 Nov 2010 11:33:05 -0700 Subject: Input: adp5588-keys - unify common header defines Unify adp5588-gpio and adp5588-keys common header defines (as per Andrew Morton request). For consistency, move remaining defines and prefix accordingly. No functional changes. Signed-off-by: Michael Hennerich Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index b92d1cd..af45d27 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -4,7 +4,7 @@ * I2C QWERTY Keypad and IO Expander * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2008-2009 Analog Devices Inc. + * Copyright (C) 2008-2010 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -24,29 +24,6 @@ #include - /* Configuration Register1 */ -#define AUTO_INC (1 << 7) -#define GPIEM_CFG (1 << 6) -#define OVR_FLOW_M (1 << 5) -#define INT_CFG (1 << 4) -#define OVR_FLOW_IEN (1 << 3) -#define K_LCK_IM (1 << 2) -#define GPI_IEN (1 << 1) -#define KE_IEN (1 << 0) - -/* Interrupt Status Register */ -#define CMP2_INT (1 << 5) -#define CMP1_INT (1 << 4) -#define OVR_FLOW_INT (1 << 3) -#define K_LCK_INT (1 << 2) -#define GPI_INT (1 << 1) -#define KE_INT (1 << 0) - -/* Key Lock and Event Counter Register */ -#define K_LCK_EN (1 << 6) -#define LCK21 0x30 -#define KEC 0xF - /* Key Event Register xy */ #define KEY_EV_PRESSED (1 << 7) #define KEY_EV_MASK (0x7F) @@ -55,10 +32,6 @@ #define KEYP_MAX_EVENT 10 -#define MAXGPIO 18 -#define ADP_BANK(offs) ((offs) >> 3) -#define ADP_BIT(offs) (1u << ((offs) & 0x7)) - /* * Early pre 4.0 Silicon required to delay readout by at least 25ms, * since the Event Counter Register updated 25ms after the interrupt @@ -75,7 +48,7 @@ struct adp5588_kpad { const struct adp5588_gpi_map *gpimap; unsigned short gpimapsize; #ifdef CONFIG_GPIOLIB - unsigned char gpiomap[MAXGPIO]; + unsigned char gpiomap[ADP5588_MAXGPIO]; bool export_gpio; struct gpio_chip gc; struct mutex gpio_lock; /* Protect cached dir, dat_out */ @@ -103,8 +76,8 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val) static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off) { struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit); } @@ -113,8 +86,8 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip, unsigned off, int val) { struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); mutex_lock(&kpad->gpio_lock); @@ -132,8 +105,8 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip, static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off) { struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); int ret; mutex_lock(&kpad->gpio_lock); @@ -150,8 +123,8 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip, unsigned off, int val) { struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); int ret; mutex_lock(&kpad->gpio_lock); @@ -176,7 +149,7 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip, static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad, const struct adp5588_kpad_platform_data *pdata) { - bool pin_used[MAXGPIO]; + bool pin_used[ADP5588_MAXGPIO]; int n_unused = 0; int i; @@ -191,7 +164,7 @@ static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad, for (i = 0; i < kpad->gpimapsize; i++) pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true; - for (i = 0; i < MAXGPIO; i++) + for (i = 0; i < ADP5588_MAXGPIO; i++) if (!pin_used[i]) kpad->gpiomap[n_unused++] = i; @@ -234,7 +207,7 @@ static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad) return error; } - for (i = 0; i <= ADP_BANK(MAXGPIO); i++) { + for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { kpad->dat_out[i] = adp5588_read(kpad->client, GPIO_DAT_OUT1 + i); kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i); @@ -318,11 +291,11 @@ static void adp5588_work(struct work_struct *work) status = adp5588_read(client, INT_STAT); - if (status & OVR_FLOW_INT) /* Unlikely and should never happen */ + if (status & ADP5588_OVR_FLOW_INT) /* Unlikely and should never happen */ dev_err(&client->dev, "Event Overflow Error\n"); - if (status & KE_INT) { - ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC; + if (status & ADP5588_KE_INT) { + ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & ADP5588_KEC; if (ev_cnt) { adp5588_report_events(kpad, ev_cnt); input_sync(kpad->input); @@ -360,7 +333,7 @@ static int __devinit adp5588_setup(struct i2c_client *client) if (pdata->en_keylock) { ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1); ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2); - ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN); + ret |= adp5588_write(client, KEY_LCK_EC_STAT, ADP5588_K_LCK_EN); } for (i = 0; i < KEYP_MAX_EVENT; i++) @@ -384,7 +357,7 @@ static int __devinit adp5588_setup(struct i2c_client *client) } if (gpio_data) { - for (i = 0; i <= ADP_BANK(MAXGPIO); i++) { + for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { int pull_mask = gpio_data->pullup_dis_mask; ret |= adp5588_write(client, GPIO_PULL1 + i, @@ -392,11 +365,14 @@ static int __devinit adp5588_setup(struct i2c_client *client) } } - ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT | - OVR_FLOW_INT | K_LCK_INT | - GPI_INT | KE_INT); /* Status is W1C */ + ret |= adp5588_write(client, INT_STAT, + ADP5588_CMP2_INT | ADP5588_CMP1_INT | + ADP5588_OVR_FLOW_INT | ADP5588_K_LCK_INT | + ADP5588_GPI_INT | ADP5588_KE_INT); /* Status is W1C */ - ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN); + ret |= adp5588_write(client, CFG, ADP5588_INT_CFG | + ADP5588_OVR_FLOW_IEN | + ADP5588_KE_IEN); if (ret < 0) { dev_err(&client->dev, "Write Error\n"); diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h index 3c5d6b6..cec17cf 100644 --- a/include/linux/i2c/adp5588.h +++ b/include/linux/i2c/adp5588.h @@ -1,7 +1,7 @@ /* * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller * - * Copyright 2009 Analog Devices Inc. + * Copyright 2009-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -77,13 +77,26 @@ /* Configuration Register1 */ #define ADP5588_AUTO_INC (1 << 7) #define ADP5588_GPIEM_CFG (1 << 6) +#define ADP5588_OVR_FLOW_M (1 << 5) #define ADP5588_INT_CFG (1 << 4) +#define ADP5588_OVR_FLOW_IEN (1 << 3) +#define ADP5588_K_LCK_IM (1 << 2) #define ADP5588_GPI_IEN (1 << 1) +#define ADP5588_KE_IEN (1 << 0) /* Interrupt Status Register */ +#define ADP5588_CMP2_INT (1 << 5) +#define ADP5588_CMP1_INT (1 << 4) +#define ADP5588_OVR_FLOW_INT (1 << 3) +#define ADP5588_K_LCK_INT (1 << 2) #define ADP5588_GPI_INT (1 << 1) #define ADP5588_KE_INT (1 << 0) +/* Key Lock and Event Counter Register */ +#define ADP5588_K_LCK_EN (1 << 6) +#define ADP5588_LCK21 0x30 +#define ADP5588_KEC 0xF + #define ADP5588_MAXGPIO 18 #define ADP5588_BANK(offs) ((offs) >> 3) #define ADP5588_BIT(offs) (1u << ((offs) & 0x7)) -- cgit v0.10.2 From b50b521694cb7093640879d3279b88d2873f6183 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 3 Nov 2010 11:02:31 -0700 Subject: Input: export input_reset_device() for use in KGDB KGDB, much like the resume process, needs to be able to mark all keys that were pressed at the time we dropped into the debuggers as "released", since it is unlikely that the keys stay pressed for the entire duration of the debug session. Also we need to make sure that input_reset_device() and input_dev_suspend() only attempt to change state of currenlt opened devices since closed devices may not be ready to accept IO requests. Tested-by: Jason Wessel Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/input.c b/drivers/input/input.c index d092ef9..75bed63 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1565,8 +1565,7 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env) } \ } while (0) -#ifdef CONFIG_PM -static void input_dev_reset(struct input_dev *dev, bool activate) +static void input_dev_toggle(struct input_dev *dev, bool activate) { if (!dev->event) return; @@ -1580,12 +1579,44 @@ static void input_dev_reset(struct input_dev *dev, bool activate) } } +/** + * input_reset_device() - reset/restore the state of input device + * @dev: input device whose state needs to be reset + * + * This function tries to reset the state of an opened input device and + * bring internal state and state if the hardware in sync with each other. + * We mark all keys as released, restore LED state, repeat rate, etc. + */ +void input_reset_device(struct input_dev *dev) +{ + mutex_lock(&dev->mutex); + + if (dev->users) { + input_dev_toggle(dev, true); + + /* + * Keys that have been pressed at suspend time are unlikely + * to be still pressed when we resume. + */ + spin_lock_irq(&dev->event_lock); + input_dev_release_keys(dev); + spin_unlock_irq(&dev->event_lock); + } + + mutex_unlock(&dev->mutex); +} +EXPORT_SYMBOL(input_reset_device); + +#ifdef CONFIG_PM static int input_dev_suspend(struct device *dev) { struct input_dev *input_dev = to_input_dev(dev); mutex_lock(&input_dev->mutex); - input_dev_reset(input_dev, false); + + if (input_dev->users) + input_dev_toggle(input_dev, false); + mutex_unlock(&input_dev->mutex); return 0; @@ -1595,18 +1626,7 @@ static int input_dev_resume(struct device *dev) { struct input_dev *input_dev = to_input_dev(dev); - mutex_lock(&input_dev->mutex); - input_dev_reset(input_dev, true); - - /* - * Keys that have been pressed at suspend time are unlikely - * to be still pressed when we resume. - */ - spin_lock_irq(&input_dev->event_lock); - input_dev_release_keys(input_dev); - spin_unlock_irq(&input_dev->event_lock); - - mutex_unlock(&input_dev->mutex); + input_reset_device(input_dev); return 0; } diff --git a/include/linux/input.h b/include/linux/input.h index 51af441..6ef4446 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1406,6 +1406,8 @@ static inline void input_set_drvdata(struct input_dev *dev, void *data) int __must_check input_register_device(struct input_dev *); void input_unregister_device(struct input_dev *); +void input_reset_device(struct input_dev *); + int __must_check input_register_handler(struct input_handler *); void input_unregister_handler(struct input_handler *); @@ -1421,7 +1423,7 @@ void input_release_device(struct input_handle *); int input_open_device(struct input_handle *); void input_close_device(struct input_handle *); -int input_flush_device(struct input_handle* handle, struct file* file); +int input_flush_device(struct input_handle *handle, struct file *file); void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value); void input_inject_event(struct input_handle *handle, unsigned int type, unsigned int code, int value); -- cgit v0.10.2 From 111c182340cd22e238ab1cc6564df336c6ebd7cb Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 3 Nov 2010 11:04:05 -0700 Subject: kgdboc: reset input devices (keyboards) when exiting debugger Use the newly exported input_reset_device() call to reset LED state and mark all keys/buttons as released on all keyboard-like devices when exiting the debugger. [jason.wessel@windriver.com: fix compile without keyboard input driver] Signed-off-by: Jason Wessel Signed-off-by: Dmitry Torokhov diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c index d4b711c..3374618 100644 --- a/drivers/serial/kgdboc.c +++ b/drivers/serial/kgdboc.c @@ -18,6 +18,7 @@ #include #include #include +#include #define MAX_CONFIG_LEN 40 @@ -37,6 +38,61 @@ static struct tty_driver *kgdb_tty_driver; static int kgdb_tty_line; #ifdef CONFIG_KDB_KEYBOARD +static int kgdboc_reset_connect(struct input_handler *handler, + struct input_dev *dev, + const struct input_device_id *id) +{ + input_reset_device(dev); + + /* Retrun an error - we do not want to bind, just to reset */ + return -ENODEV; +} + +static void kgdboc_reset_disconnect(struct input_handle *handle) +{ + /* We do not expect anyone to actually bind to us */ + BUG(); +} + +static const struct input_device_id kgdboc_reset_ids[] = { + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT, + .evbit = { BIT_MASK(EV_KEY) }, + }, + { } +}; + +static struct input_handler kgdboc_reset_handler = { + .connect = kgdboc_reset_connect, + .disconnect = kgdboc_reset_disconnect, + .name = "kgdboc_reset", + .id_table = kgdboc_reset_ids, +}; + +static DEFINE_MUTEX(kgdboc_reset_mutex); + +static void kgdboc_restore_input_helper(struct work_struct *dummy) +{ + /* + * We need to take a mutex to prevent several instances of + * this work running on different CPUs so they don't try + * to register again already registered handler. + */ + mutex_lock(&kgdboc_reset_mutex); + + if (input_register_handler(&kgdboc_reset_handler) == 0) + input_unregister_handler(&kgdboc_reset_handler); + + mutex_unlock(&kgdboc_reset_mutex); +} + +static DECLARE_WORK(kgdboc_restore_input_work, kgdboc_restore_input_helper); + +static void kgdboc_restore_input(void) +{ + schedule_work(&kgdboc_restore_input_work); +} + static int kgdboc_register_kbd(char **cptr) { if (strncmp(*cptr, "kbd", 3) == 0) { @@ -64,10 +120,12 @@ static void kgdboc_unregister_kbd(void) i--; } } + flush_work_sync(&kgdboc_restore_input_work); } #else /* ! CONFIG_KDB_KEYBOARD */ #define kgdboc_register_kbd(x) 0 #define kgdboc_unregister_kbd() +#define kgdboc_restore_input() #endif /* ! CONFIG_KDB_KEYBOARD */ static int kgdboc_option_setup(char *opt) @@ -231,6 +289,7 @@ static void kgdboc_post_exp_handler(void) dbg_restore_graphics = 0; con_debug_leave(); } + kgdboc_restore_input(); } static struct kgdb_io kgdboc_io_ops = { -- cgit v0.10.2 From 48fcfc888b48ad49dd83faa107264bbfb0089cad Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Wed, 3 Nov 2010 16:27:57 -0400 Subject: i915: reprogram power monitoring registers on resume Fixes issue where i915_gfx_val was reporting values several orders of magnitude higher than physically possible (without leaving scorch marks on my thighs at least.) Signed-off-by: Kyle McMartin Reviewed-by: Jesse Barnes Cc: stable@kernel.org Signed-off-by: Chris Wilson diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 989c19d..454c064 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -862,8 +862,10 @@ int i915_restore_state(struct drm_device *dev) /* Clock gating state */ intel_init_clock_gating(dev); - if (HAS_PCH_SPLIT(dev)) + if (HAS_PCH_SPLIT(dev)) { ironlake_enable_drps(dev); + intel_init_emon(dev); + } /* Cache mode state */ I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 9af9f86..21551fe 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -296,6 +296,7 @@ extern void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green, extern void intel_init_clock_gating(struct drm_device *dev); extern void ironlake_enable_drps(struct drm_device *dev); extern void ironlake_disable_drps(struct drm_device *dev); +extern void intel_init_emon(struct drm_device *dev); extern int intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj, -- cgit v0.10.2 From 5e84e1a487bf6ae912aac1142bdf399b8bdc9238 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Thu, 28 Oct 2010 16:38:08 +0800 Subject: drm/i915: Fix KMS regression on Sandybridge/CPT We should enable FDI normal training on Sandybridge/CPT system as well. Signed-off-by: Zhenyu Wang [ickle: removed unrelated chunks] Cc: stable@kernel.org Signed-off-by: Chris Wilson diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 528aa06..5e839c7 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1681,6 +1681,37 @@ static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock) udelay(500); } +static void intel_fdi_normal_train(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + u32 reg, temp; + + /* enable normal train */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE; + I915_WRITE(reg, temp); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + if (HAS_PCH_CPT(dev)) { + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp |= FDI_LINK_TRAIN_NORMAL_CPT; + } else { + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_NONE; + } + I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE); + + /* wait one idle pattern time */ + POSTING_READ(reg); + udelay(1000); +} + /* The FDI link training functions for ILK/Ibexpeak. */ static void ironlake_fdi_link_train(struct drm_crtc *crtc) { @@ -1767,27 +1798,6 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc) DRM_DEBUG_KMS("FDI train done\n"); - /* enable normal train */ - reg = FDI_TX_CTL(pipe); - temp = I915_READ(reg); - temp &= ~FDI_LINK_TRAIN_NONE; - temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE; - I915_WRITE(reg, temp); - - reg = FDI_RX_CTL(pipe); - temp = I915_READ(reg); - if (HAS_PCH_CPT(dev)) { - temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; - temp |= FDI_LINK_TRAIN_NORMAL_CPT; - } else { - temp &= ~FDI_LINK_TRAIN_NONE; - temp |= FDI_LINK_TRAIN_NONE; - } - I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE); - - /* wait one idle pattern time */ - POSTING_READ(reg); - udelay(1000); } static const int const snb_b_fdi_train_param [] = { @@ -2090,6 +2100,8 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe))); I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe))); + intel_fdi_normal_train(crtc); + /* For PCH DP, enable TRANS_DP_CTL */ if (HAS_PCH_CPT(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { -- cgit v0.10.2 From e07ac3a0b17ed9dec26b742ea41514063ef12386 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Thu, 4 Nov 2010 09:02:54 +0000 Subject: drm/i915; Don't apply Ironlake FDI clock workaround to Sandybridge Signed-off-by: Zhenyu Wang Cc: stable@kernel.org Signed-off-by: Chris Wilson diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 2c2c19b..90414ae 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1321,6 +1321,7 @@ static inline void i915_write(struct drm_i915_private *dev_priv, u32 reg, #define INTEL_PCH_TYPE(dev) (((struct drm_i915_private *)(dev)->dev_private)->pch_type) #define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT) +#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5e839c7..48d8fd6 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2212,9 +2212,10 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) udelay(100); /* Ironlake workaround, disable clock pointer after downing FDI */ - I915_WRITE(FDI_RX_CHICKEN(pipe), - I915_READ(FDI_RX_CHICKEN(pipe) & - ~FDI_RX_PHASE_SYNC_POINTER_ENABLE)); + if (HAS_PCH_IBX(dev)) + I915_WRITE(FDI_RX_CHICKEN(pipe), + I915_READ(FDI_RX_CHICKEN(pipe) & + ~FDI_RX_PHASE_SYNC_POINTER_ENABLE)); /* still set train pattern 1 */ reg = FDI_TX_CTL(pipe); -- cgit v0.10.2 From 8d0f56708292ca5c256ee3b7187d124afee81d93 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 2 Nov 2010 17:30:47 +0800 Subject: agp/intel: restore cache behavior on sandybridge This restores cache behavior for default AGP_USER_MEMORY as uncached, and leave default AGP_USER_CACHED_MEMORY as LLC only. I've seen different cache behavior on one sandybridge desktop CPU vs. another mobile CPU. Until we figure out how to detect the real cache config, restore back to the original behavior now. Signed-off-by: Zhenyu Wang Cc: stable@kernel.org Signed-off-by: Chris Wilson diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 6b6760e..791216d 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1210,7 +1210,7 @@ static void gen6_write_entry(dma_addr_t addr, unsigned int entry, unsigned int gfdt = flags & AGP_USER_CACHED_MEMORY_GFDT; u32 pte_flags; - if (type_mask == AGP_USER_UNCACHED_MEMORY) + if (type_mask == AGP_USER_MEMORY) pte_flags = GEN6_PTE_UNCACHED | I810_PTE_VALID; else if (type_mask == AGP_USER_CACHED_MEMORY_LLC_MLC) { pte_flags = GEN6_PTE_LLC | I810_PTE_VALID; -- cgit v0.10.2 From 16a02cf08a2de0863daf7ebb91718d7c6bbe7f9c Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 2 Nov 2010 17:30:46 +0800 Subject: agp/intel: fix cache control for sandybridge This is broken from 97ef1bdd0bc75bce7b2058e9c432b6c277dcf4d3. Let's set the correct bit for LLC+MLC and LLC only. Signed-off-by: Zhenyu Wang Cc: stable@kernel.org Signed-off-by: Chris Wilson diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 791216d..9272c38 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1213,11 +1213,11 @@ static void gen6_write_entry(dma_addr_t addr, unsigned int entry, if (type_mask == AGP_USER_MEMORY) pte_flags = GEN6_PTE_UNCACHED | I810_PTE_VALID; else if (type_mask == AGP_USER_CACHED_MEMORY_LLC_MLC) { - pte_flags = GEN6_PTE_LLC | I810_PTE_VALID; + pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID; if (gfdt) pte_flags |= GEN6_PTE_GFDT; } else { /* set 'normal'/'cached' to LLC by default */ - pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID; + pte_flags = GEN6_PTE_LLC | I810_PTE_VALID; if (gfdt) pte_flags |= GEN6_PTE_GFDT; } -- cgit v0.10.2 From 73b14484fb686252aaf4aac4fa65b45139ed8514 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 4 Nov 2010 08:38:18 -0700 Subject: Input: i8042 - add Sony VAIOs to MUX blacklist The Sony VPCZ1 doesn't support active multiplexing and trying to enable it causes keyboard to stop working. Since most (all?) VAIOs do not have external PS/2 ports nor they implement active multiplexing properly, and trying to enable MUX usually messes up keyboard/touchpad, let's simply disable MUX probing based on board name (VAIO). Signed-off-by: Jesse Barnes Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index ed7ad74..a5475b5 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -351,6 +351,17 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { }, }, { + /* + * Most (all?) VAIOs do not have external PS/2 ports nor + * they implement active multiplexing properly, and + * MUX discovery usually messes up keyboard/touchpad. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "VAIO"), + }, + }, + { /* Amoi M636/A737 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Amoi Electronics CO.,LTD."), -- cgit v0.10.2 From 8c5188b6d350d033275eaf85faa12f284e2909e4 Mon Sep 17 00:00:00 2001 From: Benjamin LaHaise Date: Thu, 4 Nov 2010 10:29:13 -0700 Subject: Input: atkbd - add 'terminal' parameter for IBM Terminal keyboards MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Many of the IBM Terminal keyboards from the 1980s and early 1990s communicate using a protocol similar, but not identical to the AT keyboard protocol. (Models known to be like this include 6110344, 6110668, 1390876, 1386887, and possibly others.) When the connector is rewired or adapter to an AT-DIN or PS/2 connector, they can be connected to a standard PC, with three caveats: a) They can only use scancode set 3; requests to use anything else are quietly ignored. b) The AT Command to request Make, Break and Repeat codes is not properly interpreted. c) The top function keys on a 122 key keyboard, and the arrow/edit keys in the middle of the board send non-standard scancodes. C) is easily taken care of in userspace, by use of setkeycodes B) can be taken care of by a userspace hack (that makes the kernel complain in dmesg) A) is fixable in theory, but on the keyboard i tested on (6110668), it seems to be detected unoverridably as Set 2, causing userspace oddities that make it harder to fix C). Enclosed is a small patch to the kernel that fixes A) and B) in the kernel, making it much easier to fix C) in userspace. It adds a single kernel command line parameter that overrides the detection that sets these boards as set 2, and instead of sending the Make-break-repeat command to the keyboard, it sends the make-break command, which is properly recognized by these keyboards. Software level key repeating seems to make up for the lack of hardware repeat codes perfectly. Without manually setting the command line parameter (tentatively named atkbd.terminal), this code has no effect, and the driver works exactly as before. See also: http://www.seasip.info/VintagePC/ibm_1390876.html http://www.seasip.info/VintagePC/ibm_6110344.html http://geekhack.org/showwiki.php?title=Island:7306 Signed-off-by: Erika Quinn Signed-off-by: Benjamin LaHaise Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index d358ef8..11478eb 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -63,6 +63,10 @@ static bool atkbd_extra; module_param_named(extra, atkbd_extra, bool, 0); MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards"); +static bool atkbd_terminal; +module_param_named(terminal, atkbd_terminal, bool, 0); +MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2"); + /* * Scancode to keycode tables. These are just the default setting, and * are loadable via a userland utility. @@ -136,7 +140,8 @@ static const unsigned short atkbd_unxlate_table[128] = { #define ATKBD_CMD_ENABLE 0x00f4 #define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */ #define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */ -#define ATKBD_CMD_SETALL_MBR 0x00fa +#define ATKBD_CMD_SETALL_MB 0x00f8 /* Set all keys to give break codes */ +#define ATKBD_CMD_SETALL_MBR 0x00fa /* ... and repeat */ #define ATKBD_CMD_RESET_BAT 0x02ff #define ATKBD_CMD_RESEND 0x00fe #define ATKBD_CMD_EX_ENABLE 0x10ea @@ -764,6 +769,11 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra } } + if (atkbd_terminal) { + ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB); + return 3; + } + if (target_set != 3) return 2; -- cgit v0.10.2 From c054a076a1bd4731820a9c4d638b13d5c9bf5935 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 4 Nov 2010 14:38:39 -0400 Subject: crypto: padlock - Fix AES-CBC handling on odd-block-sized input On certain VIA chipsets AES-CBC requires the input/output to be a multiple of 64 bytes. We had a workaround for this but it was buggy as it sent the whole input for processing when it is meant to only send the initial number of blocks which makes the rest a multiple of 64 bytes. As expected this causes memory corruption whenever the workaround kicks in. Reported-by: Phil Sutter Signed-off-by: Herbert Xu diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c index 2e992bc..8a515ba 100644 --- a/drivers/crypto/padlock-aes.c +++ b/drivers/crypto/padlock-aes.c @@ -286,7 +286,7 @@ static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key, if (initial) asm volatile (".byte 0xf3,0x0f,0xa7,0xd0" /* rep xcryptcbc */ : "+S" (input), "+D" (output), "+a" (iv) - : "d" (control_word), "b" (key), "c" (count)); + : "d" (control_word), "b" (key), "c" (initial)); asm volatile (".byte 0xf3,0x0f,0xa7,0xd0" /* rep xcryptcbc */ : "+S" (input), "+D" (output), "+a" (iv) -- cgit v0.10.2 From 9001d80df9b1db946ef5d0fb52c974d74c567b86 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Sat, 25 Sep 2010 05:50:43 -0500 Subject: usb: musb: gadget: fix dma mode 0 in double buffer Rx case 1, In Rx double buffer case, FIFO may have two packets, so rxstate should be called to unload fifo if RXPKTRDY is set even the current request has not been completed. 2, Commit 633ba7876b96ec339ef685357e2f7c60b5a8ce85 introduces autoclear to support double buffer in dma mode 0, so remove clearing RXPKTRDY manually for dma mode 0. 3, Commit c7af6b29ffeffbeb28caf39e5b2ce29b11807c7d may break dma mode 1 for non-doublebuffer endpoint, fix it. With this patch, either usbtest #5 or g_file_storage(writing file to device in usb host) or g_ether have been tested OK in double buffer case(using fifo mode 3). Also, this patch has been verified that single buffer case can't be broken. Cc: David Brownell Cc: Anand Gadiyar Cc: Mike Frysinger Cc: Sergei Shtylyov Signed-off-by: Ming Lei Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 5d81504..ce31f07 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -644,10 +644,8 @@ static void rxstate(struct musb *musb, struct musb_request *req) */ csr |= MUSB_RXCSR_DMAENAB; - if (!musb_ep->hb_mult && - musb_ep->hw_ep->rx_double_buffered) - csr |= MUSB_RXCSR_AUTOCLEAR; #ifdef USE_MODE1 + csr |= MUSB_RXCSR_AUTOCLEAR; /* csr |= MUSB_RXCSR_DMAMODE; */ /* this special sequence (enabling and then @@ -656,6 +654,10 @@ static void rxstate(struct musb *musb, struct musb_request *req) */ musb_writew(epio, MUSB_RXCSR, csr | MUSB_RXCSR_DMAMODE); +#else + if (!musb_ep->hb_mult && + musb_ep->hw_ep->rx_double_buffered) + csr |= MUSB_RXCSR_AUTOCLEAR; #endif musb_writew(epio, MUSB_RXCSR, csr); @@ -807,7 +809,7 @@ void musb_g_rx(struct musb *musb, u8 epnum) #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) /* Autoclear doesn't clear RxPktRdy for short packets */ - if ((dma->desired_mode == 0) + if ((dma->desired_mode == 0 && !hw_ep->rx_double_buffered) || (dma->actual_len & (musb_ep->packet_sz - 1))) { /* ack the read! */ @@ -818,8 +820,16 @@ void musb_g_rx(struct musb *musb, u8 epnum) /* incomplete, and not short? wait for next IN packet */ if ((request->actual < request->length) && (musb_ep->dma->actual_len - == musb_ep->packet_sz)) + == musb_ep->packet_sz)) { + /* In double buffer case, continue to unload fifo if + * there is Rx packet in FIFO. + **/ + csr = musb_readw(epio, MUSB_RXCSR); + if ((csr & MUSB_RXCSR_RXPKTRDY) && + hw_ep->rx_double_buffered) + goto exit; return; + } #endif musb_g_giveback(musb_ep, request, 0); @@ -827,7 +837,7 @@ void musb_g_rx(struct musb *musb, u8 epnum) if (!request) return; } - +exit: /* Analyze request */ rxstate(musb, to_musb_request(request)); } -- cgit v0.10.2 From e2c3404523c5366c6cc1099d3237d363254adde0 Mon Sep 17 00:00:00 2001 From: Rahul Ruikar Date: Sat, 2 Oct 2010 01:35:48 -0500 Subject: usb: musb: musb_gadget: fix resource leakage in error path In function musb_gadget_setup() call put_device() when device_register() fails. Signed-off-by: Rahul Ruikar Acked-by: Ming Lei Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ce31f07..ba22e4a 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1705,8 +1705,10 @@ int __init musb_gadget_setup(struct musb *musb) musb_platform_try_idle(musb, 0); status = device_register(&musb->g.dev); - if (status != 0) + if (status != 0) { + put_device(&musb->g.dev); the_gadget = NULL; + } return status; } -- cgit v0.10.2 From 120d074c58172cd44887d86c9acc44882818c7e7 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 10 Oct 2010 13:52:22 -0500 Subject: usb: musb: don't leave PHY enabled on shutdown() Some actions like musb_platform_exit are only performed on module removal and not on shutdown, which results in PHY being left enabled on reboot at least. This is sometimes causing strange failures after reboot (observed on OMAP3 pandora board), when DEVCTL does not report VBUS state correctly due to unknown reasons (possibly because of communication issues between musb IP and PHY). Running musb_platform_exit before reset seems to resolve that issue. Move some exit code from musb_remove() to musb_shutdown() so that it is performed on both module removal and shutdown/reset. Also convert the host check so that it doesn't need #ifdef. Signed-off-by: Grazvydas Ignotas Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index c9f9024..2f42a5d 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1052,6 +1052,12 @@ static void musb_shutdown(struct platform_device *pdev) clk_put(musb->clock); spin_unlock_irqrestore(&musb->lock, flags); + if (!is_otg_enabled(musb) && is_host_enabled(musb)) + usb_remove_hcd(musb_to_hcd(musb)); + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + musb_platform_exit(musb); + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + /* FIXME power down */ } @@ -2244,13 +2250,6 @@ static int __exit musb_remove(struct platform_device *pdev) */ musb_exit_debugfs(musb); musb_shutdown(pdev); -#ifdef CONFIG_USB_MUSB_HDRC_HCD - if (musb->board_mode == MUSB_HOST) - usb_remove_hcd(musb_to_hcd(musb)); -#endif - musb_writeb(musb->mregs, MUSB_DEVCTL, 0); - musb_platform_exit(musb); - musb_writeb(musb->mregs, MUSB_DEVCTL, 0); musb_free(musb); iounmap(ctrl_base); -- cgit v0.10.2 From 31c9909b512aa4c97cffc40627c255070fe0bc78 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 19 Oct 2010 19:08:25 -0500 Subject: USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration Commit 9f445cb29918dc488b7a9a92ef018599cce33df7[USB: musb: disable double buffering for older RTL versions] tries to disable double buffer mode by writing endpoint hw max packet size to TXMAP/RXMAP. First the approach can break full speed and cause overflow problems. We should always set those registers with the actual max packet size from endpoint descriptor. Second, the problem describe by commit 9f445cb29918dc488b7a9a92ef018599cce33df7 was caused by musb gadget driver; nothing to do with RTL revision as originaly suspected. The real fix to the problem is to always use actual max packet size from endpoint descriptor to config TXMAP/RXMAP registers. Cc: Cliff Cai Cc: David Brownell Cc: Anand Gadiyar Cc: Mike Frysinger Cc: Sergei Shtylyov Cc: stable@kernel.org Signed-off-by: Ming Lei Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ba22e4a..f37b859 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -926,13 +926,9 @@ static int musb_gadget_enable(struct usb_ep *ep, * likewise high bandwidth periodic tx */ /* Set TXMAXP with the FIFO size of the endpoint - * to disable double buffering mode. Currently, It seems that double - * buffering has problem if musb RTL revision number < 2.0. + * to disable double buffering mode. */ - if (musb->hwvers < MUSB_HWVERS_2000) - musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); - else - musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; if (musb_readw(regs, MUSB_TXCSR) @@ -968,10 +964,7 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set RXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - if (musb->hwvers < MUSB_HWVERS_2000) - musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_rx); - else - musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); /* force shared fifo to OUT-only mode */ if (hw_ep->is_shared_fifo) { -- cgit v0.10.2 From 5d726f5add3af537952f7c35fdaebab43b718c2d Mon Sep 17 00:00:00 2001 From: Ian Jeffray Date: Sat, 23 Oct 2010 05:11:56 -0500 Subject: USB: musb: blackfin: fix musb_read_txhubport() definition The new MUSB power code needs musb_read_txhubport() to return a value (so stub it as 0 like the other Blackfin hub funcs). Signed-off-by: Ian Jeffray Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 2442675..5a727c5 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -633,8 +633,9 @@ static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum) return 0; } -static inline void musb_read_txhubport(void __iomem *mbase, u8 epnum) +static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum) { + return 0; } #endif /* CONFIG_BLACKFIN */ -- cgit v0.10.2 From 32d5dc9520f0c6f60f691dd478741c774e292406 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Sat, 23 Oct 2010 05:11:58 -0500 Subject: USB: musb: pm: don't rely fully on clock support Since clock support is optional across processors, don't make the whole musb pm paths depend upon it. Just conditionalize the clock accesses. Signed-off-by: Bob Liu Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 2f42a5d..7efb380 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2410,9 +2410,6 @@ static int musb_suspend(struct device *dev) unsigned long flags; struct musb *musb = dev_to_musb(&pdev->dev); - if (!musb->clock) - return 0; - spin_lock_irqsave(&musb->lock, flags); if (is_peripheral_active(musb)) { @@ -2427,10 +2424,12 @@ static int musb_suspend(struct device *dev) musb_save_context(musb); - if (musb->set_clock) - musb->set_clock(musb->clock, 0); - else - clk_disable(musb->clock); + if (musb->clock) { + if (musb->set_clock) + musb->set_clock(musb->clock, 0); + else + clk_disable(musb->clock); + } spin_unlock_irqrestore(&musb->lock, flags); return 0; } @@ -2440,13 +2439,12 @@ static int musb_resume_noirq(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct musb *musb = dev_to_musb(&pdev->dev); - if (!musb->clock) - return 0; - - if (musb->set_clock) - musb->set_clock(musb->clock, 1); - else - clk_enable(musb->clock); + if (musb->clock) { + if (musb->set_clock) + musb->set_clock(musb->clock, 1); + else + clk_enable(musb->clock); + } musb_restore_context(musb); -- cgit v0.10.2 From 1e393c6eece048052d4131ec4dad3b98e35a98e2 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Sun, 24 Oct 2010 11:10:14 -0500 Subject: USB: musb: blackfin: pm: make it work Split the USB MMR init steps out into a helper func that both the platform init and the resume code may call. Then while suspending, the gpio_vrsel will change from high to low which will generate a wakeup event and resume the system immediately, so we need to manually drive it low before we sleep. Signed-off-by: Bob Liu Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 611a9d2..32cc6d9 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -323,30 +323,8 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode) return -EIO; } -int __init musb_platform_init(struct musb *musb, void *board_data) +static void musb_platform_reg_init(struct musb *musb) { - - /* - * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE - * and OTG HOST modes, while rev 1.1 and greater require PE7 to - * be low for DEVICE mode and high for HOST mode. We set it high - * here because we are in host mode - */ - - if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) { - printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d \n", - musb->config->gpio_vrsel); - return -ENODEV; - } - gpio_direction_output(musb->config->gpio_vrsel, 0); - - usb_nop_xceiv_register(); - musb->xceiv = otg_get_transceiver(); - if (!musb->xceiv) { - gpio_free(musb->config->gpio_vrsel); - return -ENODEV; - } - if (ANOMALY_05000346) { bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value); SSYNC(); @@ -380,6 +358,33 @@ int __init musb_platform_init(struct musb *musb, void *board_data) EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA | EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA); SSYNC(); +} + +int __init musb_platform_init(struct musb *musb, void *board_data) +{ + + /* + * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE + * and OTG HOST modes, while rev 1.1 and greater require PE7 to + * be low for DEVICE mode and high for HOST mode. We set it high + * here because we are in host mode + */ + + if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) { + printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n", + musb->config->gpio_vrsel); + return -ENODEV; + } + gpio_direction_output(musb->config->gpio_vrsel, 0); + + usb_nop_xceiv_register(); + musb->xceiv = otg_get_transceiver(); + if (!musb->xceiv) { + gpio_free(musb->config->gpio_vrsel); + return -ENODEV; + } + + musb_platform_reg_init(musb); if (is_host_enabled(musb)) { musb->board_set_vbus = bfin_set_vbus; @@ -394,6 +399,27 @@ int __init musb_platform_init(struct musb *musb, void *board_data) return 0; } +#ifdef CONFIG_PM +void musb_platform_save_context(struct musb *musb, + struct musb_context_registers *musb_context) +{ + if (is_host_active(musb)) + /* + * During hibernate gpio_vrsel will change from high to low + * low which will generate wakeup event resume the system + * immediately. Set it to 0 before hibernate to avoid this + * wakeup event. + */ + gpio_set_value(musb->config->gpio_vrsel, 0); +} + +void musb_platform_restore_context(struct musb *musb, + struct musb_context_registers *musb_context) +{ + musb_platform_reg_init(musb); +} +#endif + int musb_platform_exit(struct musb *musb) { gpio_free(musb->config->gpio_vrsel); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 69797e5..febaabc 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -487,7 +487,7 @@ struct musb_context_registers { }; #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) + defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_BLACKFIN) extern void musb_platform_save_context(struct musb *musb, struct musb_context_registers *musb_context); extern void musb_platform_restore_context(struct musb *musb, -- cgit v0.10.2 From 68f64714dc35a515a3064b300729e7809bcdd0e0 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Sat, 23 Oct 2010 05:12:00 -0500 Subject: USB: musb: blackfin: fix dynamic device<->host changing We need to restart the timer in order to recognize USB devices in host-only mode. Signed-off-by: Bob Liu Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 32cc6d9..ade45a2 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -171,8 +171,9 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci) } /* Start sampling ID pin, when plug is removed from MUSB */ - if (is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE - || musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { + if ((is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE + || musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) || + (musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) { mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); musb->a_wait_bcon = TIMER_DELAY; } -- cgit v0.10.2 From 9c7564620f82e55a9c8713311bffd401ec9d60fe Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Sat, 23 Oct 2010 05:12:01 -0500 Subject: USB: musb: blackfin: push clkin value to platform resources In order to not touch the driver file for different xtal usage, push the clkin value to board file and calculate the register value instead of hardcoding it. Signed-off-by: Bob Liu Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index ade45a2..fcb5206 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -337,7 +337,8 @@ static void musb_platform_reg_init(struct musb *musb) } /* Configure PLL oscillator register */ - bfin_write_USB_PLLOSC_CTRL(0x30a8); + bfin_write_USB_PLLOSC_CTRL(0x3080 | + ((480/musb->config->clkin) << 1)); SSYNC(); bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1); diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index ee2dd1d..2387f9f 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -89,6 +89,8 @@ struct musb_hdrc_config { /* A GPIO controlling VRSEL in Blackfin */ unsigned int gpio_vrsel; unsigned int gpio_vrsel_active; + /* musb CLKIN in Blackfin in MHZ */ + unsigned char clkin; #endif }; -- cgit v0.10.2 From b212091474a5f967979e62c5c24687ee4d0342d9 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 27 Oct 2010 09:42:32 -0500 Subject: usb: musb: fix kernel oops when loading musb_hdrc module for the 2nd time musb driver still may write MUSB_DEVCTL register after clock is disabled in musb_platform_exit, which may cause the kernel oops[1] when musb_hdrc module is loaded for the 2nd time. The patch fixes the kernel oops in this case. [1] kernel oops when loading musb_hdrc module for the 2nd time [ 93.380279] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5 [ 93.387847] bus: 'platform': add driver musb_hdrc [ 93.388153] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc [ 93.388183] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc [ 93.405090] HS USB OTG: revision 0x33, sysconfig 0x2010, sysstatus 0x1, intrfsel 0x1, simenable 0x0 [ 93.405364] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 93.405395] musb_hdrc: MHDRC RTL version 1.400 [ 93.405426] musb_hdrc: setup fifo_mode 3 [ 93.405456] musb_hdrc: 7/31 max ep, 3648/16384 memory [ 93.405487] musb_core_init 1524: musb_hdrc: hw_ep 0shared, max 64 [ 93.405487] musb_core_init 1524: musb_hdrc: hw_ep 1tx, doublebuffer, max 512 [ 93.405517] musb_core_init 1533: musb_hdrc: hw_ep 1rx, doublebuffer, max 512 [ 93.405548] musb_core_init 1524: musb_hdrc: hw_ep 2tx, max 512 [ 93.405578] musb_core_init 1533: musb_hdrc: hw_ep 2rx, max 512 [ 93.405578] musb_core_init 1524: musb_hdrc: hw_ep 3shared, max 256 [ 93.405609] musb_core_init 1524: musb_hdrc: hw_ep 4shared, max 256 [ 93.405853] musb_platform_try_idle 133: b_idle inactive, for idle timer for 7 ms [ 93.405944] device: 'gadget': device_add [ 93.406921] PM: Adding info for No Bus:gadget [ 93.406951] musb_init_controller 2136: OTG mode, status 0, dev80 [ 93.407379] musb_do_idle 51: musb_do_idle: state=1 [ 93.408233] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 [ 93.416656] driver: 'musb_hdrc': driver_bound: bound to device 'musb_hdrc' [ 93.416687] bus: 'platform': really_probe: bound device musb_hdrc to driver musb_hdrc [ 124.486938] bus: 'platform': remove driver musb_hdrc [ 124.490509] twl4030_usb twl4030_usb: twl4030_phy_suspend [ 124.491424] device: 'gadget': device_unregister [ 124.491424] PM: Removing info for No Bus:gadget [ 124.495269] gadget: musb_gadget_release [ 124.498992] driver: 'musb_hdrc': driver_release [ 129.569366] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=5 [ 129.576934] bus: 'platform': add driver musb_hdrc [ 129.577209] bus: 'platform': driver_probe_device: matched device musb_hdrc with driver musb_hdrc [ 129.577239] bus: 'platform': really_probe: probing driver musb_hdrc with device musb_hdrc [ 129.592651] twl4030_usb twl4030_usb: twl4030_phy_resume [ 129.592681] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab404 [ 129.600830] Internal error: : 1028 [#1] [ 129.604858] last sysfs file: /sys/devices/platform/i2c_omap.3/i2c-3/i2c-dev/i2c-3/dev [ 129.613067] Modules linked in: musb_hdrc(+) [last unloaded: musb_hdrc] [ 129.619964] CPU: 0 Not tainted (2.6.36-next-20101021+ #372) [ 129.626281] PC is at musb_platform_init+0xb0/0x1c8 [musb_hdrc] [ 129.632415] LR is at mark_held_locks+0x64/0x94 [ 129.637084] pc : [] lr : [] psr: 20000013 [ 129.637084] sp : c6d5fcb0 ip : c6d5fc38 fp : c6d5fcd4 [ 129.649139] r10: c6e72180 r9 : fa0ab000 r8 : c05612e8 [ 129.654602] r7 : 0000005c r6 : c0559cc8 r5 : c6e72180 r4 : c0561548 [ 129.661468] r3 : 04d60047 r2 : fa0ab000 r1 : c07169d8 r0 : 00000000 [ 129.668304] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 129.675811] Control: 10c5387d Table: 86e4c019 DAC: 00000015 [ 129.681823] Process insmod (pid: 554, stack limit = 0xc6d5e2f0) [ 129.688049] Stack: (0xc6d5fcb0 to 0xc6d60000) [ 129.692626] fca0: fa0ab000 c0555c54 c6d5fcd4 c0561548 [ 129.701202] fcc0: 00000003 c05612e0 c6d5fe04 c6d5fcd8 bf03140c bf0320f4 c6d5fd9c c6d5fce8 [ 129.709808] fce0: c015cb94 c041448c c06d9d10 ffffffff c6d5fd14 c6d5fd00 c00adbec c6d5fd40 [ 129.718383] fd00: c015d478 c6d5fdb0 c6d5fd24 c00a9d18 c6d5e000 60000013 bf02a4ac c05612bc [ 129.726989] fd20: c0414fb4 c00a9cf0 c6d5fd54 c6d5fd38 c015bbdc c0244280 c6e8b7b0 c7929330 [ 129.735565] fd40: c6d5fdb0 c6d5fdb0 c6d5fd7c c6e7227c c015c010 c015bb90 c015c2ac c6d5fdb0 [ 129.744171] fd60: c7929330 c6d5fdb0 c7929330 c6e8b7b0 c6d5fd9c 00000000 c7929330 c6e8b7b0 [ 129.752746] fd80: c6d5fdb0 00000000 00000001 00000000 c6d5fde4 c6d5fda0 c015d478 c015cb74 [ 129.761322] fda0: c056138c 00000000 c6d5fdcc c6d5fdb8 c7929330 00000000 c056138c c05612e8 [ 129.769927] fdc0: 00000000 c05612f0 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fdf4 c05612e8 [ 129.778503] fde0: c05612e8 bf02a2e4 c0c5d62c c06f6e00 c73217c0 00000000 c6d5fe14 c6d5fe08 [ 129.787109] fe00: c029a398 bf0311c8 c6d5fe4c c6d5fe18 c0299120 c029a384 c7919140 22222222 [ 129.795684] fe20: c6d5fe4c c05612e8 c056131c bf02a2e4 c0299278 c06f6e00 c73217c0 00000000 [ 129.804290] fe40: c6d5fe6c c6d5fe50 c0299314 c0299020 00000000 c6d5fe70 bf02a2e4 c0299278 [ 129.812866] fe60: c6d5fe94 c6d5fe70 c02987d4 c0299284 c7825060 c78c6618 00000000 bf02a2e4 [ 129.821441] fe80: c06e4c98 00000000 c6d5fea4 c6d5fe98 c0298ea4 c0298778 c6d5fedc c6d5fea8 [ 129.830047] fea0: c0297f84 c0298e8c bf02716c 000b9008 bf02a2e4 bf02a2d0 000b9008 bf02a2e4 [ 129.838623] fec0: 00000000 c06f6e00 bf031000 00000000 c6d5fefc c6d5fee0 c0299614 c0297ec0 [ 129.847229] fee0: bf02a2d0 000b9008 bf02a388 00000000 c6d5ff0c c6d5ff00 c029a868 c02995a8 [ 129.855804] ff00: c6d5ff24 c6d5ff10 c029a88c c029a818 0010281c 000b9008 c6d5ff34 c6d5ff28 [ 129.864410] ff20: bf03104c c029a878 c6d5ff7c c6d5ff38 c00463dc bf03100c 00000000 00000000 [ 129.872985] ff40: 00000000 0010281c 000b9008 bf02a388 00000000 0010281c 000b9008 bf02a388 [ 129.881591] ff60: 00000000 c00521c8 c6d5e000 00000000 c6d5ffa4 c6d5ff80 c00bb9b8 c00463ac [ 129.890167] ff80: c00adc88 c00ada68 00097e8e bebbfcf4 0010281c 00000080 00000000 c6d5ffa8 [ 129.898742] ffa0: c0052000 c00bb908 00097e8e bebbfcf4 402c9008 0010281c 000b9008 bebbfe5a [ 129.907348] ffc0: 00097e8e bebbfcf4 0010281c 00000080 00000014 bebbfcf4 bebbfe06 0000005b [ 129.915924] ffe0: bebbf9a0 bebbf990 0001a108 40263ec0 60000010 402c9008 011b0000 0000007c [ 129.924499] Backtrace: [ 129.927185] [] (musb_platform_init+0x0/0x1c8 [musb_hdrc]) from [] (musb_probe+0x250/0xf2c [musb_hdrc]) [ 129.938781] r6:c05612e0 r5:00000003 r4:c0561548 [ 129.943695] [] (musb_probe+0x0/0xf2c [musb_hdrc]) from [] (platform_drv_probe+0x20/0x24) [ 129.954040] [] (platform_drv_probe+0x0/0x24) from [] (driver_probe_device+0x10c/0x264) [ 129.964172] [] (driver_probe_device+0x0/0x264) from [] (__driver_attach+0x9c/0xa0) [ 129.973968] [] (__driver_attach+0x0/0xa0) from [] (bus_for_each_dev+0x68/0x94) [ 129.983367] r7:c0299278 r6:bf02a2e4 r5:c6d5fe70 r4:00000000 [ 129.989349] [] (bus_for_each_dev+0x0/0x94) from [] (driver_attach+0x24/0x28) [ 129.998565] r7:00000000 r6:c06e4c98 r5:bf02a2e4 r4:00000000 [ 130.004547] [] (driver_attach+0x0/0x28) from [] (bus_add_driver+0xd0/0x274) [ 130.013671] [] (bus_add_driver+0x0/0x274) from [] (driver_register+0x78/0x158) [ 130.023101] [] (driver_register+0x0/0x158) from [] (platform_driver_register+0x5c/0x60) [ 130.033325] r7:00000000 r6:bf02a388 r5:000b9008 r4:bf02a2d0 [ 130.039276] [] (platform_driver_register+0x0/0x60) from [] (platform_driver_probe+0x20/0xa8) [ 130.050018] [] (platform_driver_probe+0x0/0xa8) from [] (musb_init+0x4c/0x54 [musb_hdrc]) [ 130.060424] r5:000b9008 r4:0010281c [ 130.064239] [] (musb_init+0x0/0x54 [musb_hdrc]) from [] (do_one_initcall+0x3c/0x1c0) [ 130.074218] [] (do_one_initcall+0x0/0x1c0) from [] (sys_init_module+0xbc/0x1d0) [ 130.083709] [] (sys_init_module+0x0/0x1d0) from [] (ret_fast_syscall+0x0/0x3c) [ 130.093109] r7:00000080 r6:0010281c r5:bebbfcf4 r4:00097e8e [ 130.099090] Code: 0a000046 e3a01001 e12fff33 e59520e4 (e5923404) [ 130.105621] ---[ end trace 1d0bd69deb79164d ]--- Cc: Ajay Kumar Gupta Cc: Sergei Shtylyov Cc: Anand Gadiyar Cc: stable@kernel.org Signed-off-by: Ming Lei Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 7efb380..7827717 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1056,7 +1056,6 @@ static void musb_shutdown(struct platform_device *pdev) usb_remove_hcd(musb_to_hcd(musb)); musb_writeb(musb->mregs, MUSB_DEVCTL, 0); musb_platform_exit(musb); - musb_writeb(musb->mregs, MUSB_DEVCTL, 0); /* FIXME power down */ } -- cgit v0.10.2 From 19aab56c7f68a577d638a98c019b89420943ee70 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 29 Oct 2010 04:23:27 -0500 Subject: usb: musb: Fix handling of spurious SESSREQ Rely on VBUS being valid on top off B device. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 7827717..e6669fc 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -552,7 +552,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, if (int_usb & MUSB_INTR_SESSREQ) { void __iomem *mbase = musb->mregs; - if (devctl & MUSB_DEVCTL_BDEVICE) { + if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS + && (devctl & MUSB_DEVCTL_BDEVICE)) { DBG(3, "SessReq while on B state\n"); return IRQ_HANDLED; } -- cgit v0.10.2 From 377304abefa208890dce5739e4f297c93240efb2 Mon Sep 17 00:00:00 2001 From: Michael Spang Date: Fri, 5 Nov 2010 13:14:40 -0400 Subject: [ARM] TS-78xxx NAND resource type should be IORESOURCE_MEM The type was IORESOURCE_IO which is not what is expected by plat_nand_probe(). This device has not worked since 2d098a72 ("mtd: plat_nand: request memory resource before doing ioremap"). Signed-off-by: Michael Spang Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 696b1a9..9a5d1ef 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -239,7 +239,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = { static struct resource ts78xx_ts_nand_resources = { .start = TS_NAND_DATA, .end = TS_NAND_DATA + 4, - .flags = IORESOURCE_IO, + .flags = IORESOURCE_MEM, }; static struct platform_device ts78xx_ts_nand_device = { -- cgit v0.10.2 From 7350f419724fd9472d3b5cc521538713f9797b62 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 3 Nov 2010 17:22:00 +0200 Subject: ARM: orion5x/kirkwood/mv78xx0: fix MPP configuration corner cases Wrong MPP configuration would cause _mpp_conf loop infinitely because the mpp list iterator would not be incremented. Signed-off-by: Mike Rapoport Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 065187d..27901f7 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -59,7 +59,7 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list) } printk("\n"); - while (*mpp_list) { + for ( ; *mpp_list; mpp_list++) { unsigned int num = MPP_NUM(*mpp_list); unsigned int sel = MPP_SEL(*mpp_list); int shift, gpio_mode; @@ -88,8 +88,6 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list) if (sel != 0) gpio_mode = 0; orion_gpio_set_valid(num, gpio_mode); - - mpp_list++; } printk(KERN_DEBUG " final MPP regs:"); diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c index 354ac51..84db2df 100644 --- a/arch/arm/mach-mv78xx0/mpp.c +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -54,7 +54,7 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list) } printk("\n"); - while (*mpp_list) { + for ( ; *mpp_list; mpp_list++) { unsigned int num = MPP_NUM(*mpp_list); unsigned int sel = MPP_SEL(*mpp_list); int shift, gpio_mode; @@ -83,8 +83,6 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list) if (sel != 0) gpio_mode = 0; orion_gpio_set_valid(num, gpio_mode); - - mpp_list++; } printk(KERN_DEBUG " final MPP regs:"); diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index bc4c3b9..db485d3 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -127,7 +127,7 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode) /* Initialize gpiolib. */ orion_gpio_init(); - while (mode->mpp >= 0) { + for ( ; mode->mpp >= 0; mode++) { u32 *reg; int num_type; int shift; @@ -160,8 +160,6 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode) orion_gpio_set_unused(mode->mpp); orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO)); - - mode++; } writel(mpp_0_7_ctrl, MPP_0_7_CTRL); -- cgit v0.10.2 From b7283945c5ed8e78f0fe2c3313d8d1cdbc19b4b3 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Mon, 1 Nov 2010 22:48:11 +0000 Subject: OMAP2: Devkit8000: Fix mmc regulator failure This patch fixes the following error: >regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby >twl_reg twl_reg.6: can't register VMMC1, -22 >twl_reg: probe of twl_reg.6 failed with error -22 Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 067f437..53ac762 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - devkit8000_vmmc1_supply.dev = mmc[0].dev; - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; -- cgit v0.10.2 From e860e6da96f5a320a752da232e03d7bf885710b7 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 25 Oct 2010 14:35:24 +0000 Subject: omap: dma: Add read-back to DMA interrupt handler to avoid spuriousinterrupts Flush the writes to IRQSTATUS_L0 register in the DMA interrupt handler by reading the register directly after write. This prevents the spurious DMA interrupts noted when using VDD_OPP 1 Signed-off-by: Mathias Nyman Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index f5c5b8d..2c28265 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1983,6 +1983,8 @@ static int omap2_dma_handle_ch(int ch) dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch)); dma_write(1 << ch, IRQSTATUS_L0); + /* read back the register to flush the write */ + dma_read(IRQSTATUS_L0); /* If the ch is not chained then chain_id will be -1 */ if (dma_chan[ch].chain_id != -1) { -- cgit v0.10.2 From 1cff502d8b22272addc4f5f57346d598b4755d9e Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 2 Nov 2010 14:04:01 +0000 Subject: OMAP1: camera.h: add missing include #include directive is required to compile the dependant boards (board-ams-delta for now). Signed-off-by: Janusz Krzysztofik [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/include/mach/camera.h index fd54b45..847d00f 100644 --- a/arch/arm/mach-omap1/include/mach/camera.h +++ b/arch/arm/mach-omap1/include/mach/camera.h @@ -1,6 +1,8 @@ #ifndef __ASM_ARCH_CAMERA_H_ #define __ASM_ARCH_CAMERA_H_ +#include + void omap1_camera_init(void *); static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info) -- cgit v0.10.2 From 86c2c0a8a4965ae5cbc0ff97ed39a4472e8e9b23 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 6 Nov 2010 20:11:38 +0000 Subject: NET: pktgen - fix compile warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This should fix the following warning: net/core/pktgen.c: In function ‘pktgen_if_write’: net/core/pktgen.c:890: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Dmitry Torokhov Reviewed-by: Nelson Elhage Signed-off-by: David S. Miller diff --git a/net/core/pktgen.c b/net/core/pktgen.c index fbce4b0..1992cd0 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -887,7 +887,7 @@ static ssize_t pktgen_if_write(struct file *file, i += len; if (debug) { - size_t copy = min(count, 1023); + size_t copy = min_t(size_t, count, 1023); char tb[copy + 1]; if (copy_from_user(tb, user_buffer, copy)) return -EFAULT; -- cgit v0.10.2 From c947f69fff183e5d2a06160d9262b5dab7359e95 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 3 Nov 2010 16:00:15 +0000 Subject: ARM: Fix DMA coherent allocator alignment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit An out by one bug meant that the DMA coherent allocator was aligning to one more bit than it should, causing it to run out of available memory quicker. Fix this. Reported-by: Petr Štetiar Signed-off-by: Russell King diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index e4dd064..ac6a361 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -198,7 +198,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) * fragmentation of the DMA space, and also prevents allocations * smaller than a section from crossing a section boundary. */ - bit = fls(size - 1) + 1; + bit = fls(size - 1); if (bit > SECTION_SHIFT) bit = SECTION_SHIFT; align = 1 << bit; -- cgit v0.10.2 From d33aadbf8e9ba0b844c2a4a03723969c913ab03a Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 4 Nov 2010 18:22:51 +0100 Subject: ARM: 6468/1: backtrace: fix calculation of thread stack base When unwinding stack frames we must take care not to unwind areas of memory that lie outside of the known extent of the stack. This patch fixes an incorrect calculation of the stack base where THREAD_SIZE is added to the stack pointer after it has already been aligned to this value. Since the ALIGN macro performs this addition internally, we end up overshooting the base by 8k. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index 20b7411..c2e112e 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -28,7 +28,7 @@ int notrace unwind_frame(struct stackframe *frame) /* only go to a higher address on the stack */ low = frame->sp; - high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE; + high = ALIGN(low, THREAD_SIZE); /* check current frame pointer is within bounds */ if (fp < (low + 12) || fp + 4 >= high) diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 2a16176..d2cb0b3 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -279,7 +279,7 @@ int unwind_frame(struct stackframe *frame) /* only go to a higher address on the stack */ low = frame->sp; - high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE; + high = ALIGN(low, THREAD_SIZE); pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__, frame->pc, frame->lr, frame->sp); -- cgit v0.10.2 From c3b291d98878a5f25fee56255bcfa420e85dff59 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 4 Nov 2010 18:23:50 +0100 Subject: ARM: 6469/1: perf-events: squash compiler warning armv7_pmnc_counter_has_overflowed can return uninitialised data if an invalid counter is specified. This patch fixes the code to return 0 in this case, which squashes the compiler warning from GCC 4.5. Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 49643b1..07a5035 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -1749,7 +1749,7 @@ static inline int armv7_pmnc_has_overflowed(unsigned long pmnc) static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc, enum armv7_counters counter) { - int ret; + int ret = 0; if (counter == ARMV7_CYCLE_COUNTER) ret = pmnc & ARMV7_FLAG_C; -- cgit v0.10.2 From d4c7b1f9b41b76f6e794fdc4043f1903809e84d9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 4 Nov 2010 18:24:22 +0100 Subject: ARM: 6470/1: atomic64: use generic implementation for OABI configurations The old apcs-gnu ABI doesn't guarantee that double words are allocated to registers with even alignment, causing the 64-bit exclusive memory operations to be rejected by the assembler. This patch requires that CONFIG_AEABI is set in order to use the native atomic operations and falls back to the generic (spinlock) code otherwise. Acked-by: Nicolas Pitre Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a19a526..8ae3d48 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,7 +6,7 @@ config ARM select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION - select GENERIC_ATOMIC64 if (!CPU_32v6K) + select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_KGDB select HAVE_KPROBES if (!XIP_KERNEL) -- cgit v0.10.2 From 85d988fcff5a7e35df0d0fb0c581470f4b72a3de Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Tue, 19 Oct 2010 21:14:55 +0100 Subject: ARM: 6462/1: EP93xx: Document DMA M2P API Add kernel-doc documentation for the EP93xx DMA memory to peripheral/peripheral to memory API. Signed-off-by: Ryan Mallon Acked-by: Mika Westerberg Signed-off-by: Russell King diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 3a5961d..5e31b2b 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -1,5 +1,13 @@ -/* - * arch/arm/mach-ep93xx/include/mach/dma.h +/** + * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine + * + * The EP93xx DMA M2P subsystem handles DMA transfers between memory and + * peripherals. DMA M2P channels are available for audio, UARTs and IrDA. + * See chapter 10 of the EP93xx users guide for full details on the DMA M2P + * engine. + * + * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code. + * */ #ifndef __ASM_ARCH_DMA_H @@ -8,12 +16,34 @@ #include #include +/** + * struct ep93xx_dma_buffer - Information about a buffer to be transferred + * using the DMA M2P engine + * + * @list: Entry in DMA buffer list + * @bus_addr: Physical address of the buffer + * @size: Size of the buffer in bytes + */ struct ep93xx_dma_buffer { struct list_head list; u32 bus_addr; u16 size; }; +/** + * struct ep93xx_dma_m2p_client - Information about a DMA M2P client + * + * @name: Unique name for this client + * @flags: Client flags + * @cookie: User data to pass to callback functions + * @buffer_started: Non NULL function to call when a transfer is started. + * The arguments are the user data cookie and the DMA + * buffer which is starting. + * @buffer_finished: Non NULL function to call when a transfer is completed. + * The arguments are the user data cookie, the DMA buffer + * which has completed, and a boolean flag indicating if + * the transfer had an error. + */ struct ep93xx_dma_m2p_client { char *name; u8 flags; @@ -24,10 +54,11 @@ struct ep93xx_dma_m2p_client { struct ep93xx_dma_buffer *buf, int bytes, int error); - /* Internal to the DMA code. */ + /* private: Internal use only */ void *channel; }; +/* DMA M2P ports */ #define EP93XX_DMA_M2P_PORT_I2S1 0x00 #define EP93XX_DMA_M2P_PORT_I2S2 0x01 #define EP93XX_DMA_M2P_PORT_AAC1 0x02 @@ -39,18 +70,80 @@ struct ep93xx_dma_m2p_client { #define EP93XX_DMA_M2P_PORT_UART3 0x08 #define EP93XX_DMA_M2P_PORT_IRDA 0x09 #define EP93XX_DMA_M2P_PORT_MASK 0x0f -#define EP93XX_DMA_M2P_TX 0x00 -#define EP93XX_DMA_M2P_RX 0x10 -#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 -#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 -#define EP93XX_DMA_M2P_ERROR_MASK 0x60 -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); +/* DMA M2P client flags */ +#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */ +#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */ + +/* + * DMA M2P client error handling flags. See the EP93xx users guide + * documentation on the DMA M2P CONTROL register for more details + */ +#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */ +#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */ +#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */ + +/** + * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P + * subsystem + * + * @m2p: Client information to register + * returns 0 on success + * + * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA + * client + */ +int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); + +/** + * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P + * subsystem + * + * @m2p: Client to unregister + * + * Any transfers currently in progress will be completed in hardware, but + * ignored in software. + */ void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p); + +/** + * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer + * + * @m2p: DMA Client to submit the transfer on + * @buf: DMA Buffer to submit + * + * If the current or next transfer positions are free on the M2P client then + * the transfer is started immediately. If not, the transfer is added to the + * list of pending transfers. This function must not be called from the + * buffer_finished callback for an M2P channel. + * + */ void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p, struct ep93xx_dma_buffer *buf); + +/** + * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list + * for an M2P channel + * + * @m2p: DMA Client to submit the transfer on + * @buf: DMA Buffer to submit + * + * This function must only be called from the buffer_finished callback for an + * M2P channel. It is commonly used to add the next transfer in a chained list + * of DMA transfers. + */ void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p, struct ep93xx_dma_buffer *buf); + +/** + * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client + * + * @m2p: DMA client to flush transfers on + * + * Any transfers currently in progress will be completed in hardware, but + * ignored in software. + * + */ void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p); #endif /* __ASM_ARCH_DMA_H */ -- cgit v0.10.2 From 235584b6f3b71bc1381be13a963a16f7107650cf Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 30 Oct 2010 14:21:24 -0700 Subject: ARM: arch/arm/kernel/hw_breakpoint.c: Convert WARN_ON to WARN Message isn't printed by WARN_ON. Signed-off-by: Joe Perches Signed-off-by: Russell King diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 54593b0..21e3a4a 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -748,8 +748,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, breakpoint_handler(addr, regs); break; case ARM_ENTRY_ASYNC_WATCHPOINT: - WARN_ON("Asynchronous watchpoint exception taken. " - "Debugging results may be unreliable"); + WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n"); case ARM_ENTRY_SYNC_WATCHPOINT: watchpoint_handler(addr, regs); break; -- cgit v0.10.2 From 69448c2a4d23e5883cbca21a173e3eb89f095746 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 5 Nov 2010 16:12:34 -0700 Subject: ARM: arch/arm/kernel/traps.c: Convert sprintf_symbol to %pS Signed-off-by: Joe Perches Signed-off-by: Russell King diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index cda78d5..446aee9 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -53,10 +53,7 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long); void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame) { #ifdef CONFIG_KALLSYMS - char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN]; - sprint_symbol(sym1, where); - sprint_symbol(sym2, from); - printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2); + printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from); #else printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from); #endif -- cgit v0.10.2 From 43b81f85ebfbed9c720f3c27ec7f364930aa3b5e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 7 Nov 2010 19:58:05 -0800 Subject: net dst: need linux/cache.h for ____cacheline_aligned_in_smp. Presently the b43legacy build fails on an sh randconfig: In file included from include/net/dst.h:12, from drivers/net/wireless/b43legacy/xmit.c:32: include/net/dst_ops.h:28: error: expected ':', ',', ';', '}' or '__attribute__' before '____cacheline_aligned_in_smp' include/net/dst_ops.h: In function 'dst_entries_get_fast': include/net/dst_ops.h:33: error: 'struct dst_ops' has no member named 'pcpuc_entries' include/net/dst_ops.h: In function 'dst_entries_get_slow': include/net/dst_ops.h:41: error: 'struct dst_ops' has no member named 'pcpuc_entries' include/net/dst_ops.h: In function 'dst_entries_add': include/net/dst_ops.h:49: error: 'struct dst_ops' has no member named 'pcpuc_entries' include/net/dst_ops.h: In function 'dst_entries_init': include/net/dst_ops.h:55: error: 'struct dst_ops' has no member named 'pcpuc_entries' include/net/dst_ops.h: In function 'dst_entries_destroy': include/net/dst_ops.h:60: error: 'struct dst_ops' has no member named 'pcpuc_entries' make[5]: *** [drivers/net/wireless/b43legacy/xmit.o] Error 1 make[5]: *** Waiting for unfinished jobs.... Signed-off-by: Paul Mundt Signed-off-by: David S. Miller diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h index 1fa5306..51665b3 100644 --- a/include/net/dst_ops.h +++ b/include/net/dst_ops.h @@ -2,6 +2,7 @@ #define _NET_DST_OPS_H #include #include +#include struct dst_entry; struct kmem_cachep; -- cgit v0.10.2 From 3f25cb042ca77ac52546ae9f0039cfd0a243698c Mon Sep 17 00:00:00 2001 From: Tony SIM Date: Mon, 8 Nov 2010 04:07:47 +0000 Subject: ARM: mach-shmobile: intc-sh7372: fix interrupt number Signed-off-by: Tony SIM Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 4cd3cae..30b2f40 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -98,7 +98,7 @@ static struct intc_vect intca_vectors[] __initdata = { INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0), INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220), INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260), - INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0), + INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0), INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0), INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320), INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360), -- cgit v0.10.2 From 2e351ec61c35fac01ed1fb1ce35c183bf85e780c Mon Sep 17 00:00:00 2001 From: Yusuke Goda Date: Mon, 8 Nov 2010 05:45:09 +0000 Subject: ARM: mach-shmobile: ap4evb: Mark NOR boot loader partitions read-only. This makes the loader and bootenv partitions read-only under MTD for the on-board NOR flash. Signed-off-by: Yusuke Goda Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 32d9e28..63c2fca 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -163,11 +163,13 @@ static struct mtd_partition nor_flash_partitions[] = { .name = "loader", .offset = 0x00000000, .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, }, { .name = "bootenv", .offset = MTDPART_OFS_APPEND, .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, }, { .name = "kernel_ro", -- cgit v0.10.2 From 899be96db75451ba98cb217109ef4cf2ee6de927 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 8 Nov 2010 13:35:10 +0800 Subject: rtc: rtc-sh - fix a memory leak request_mem_region() will call kzalloc to allocate memory for struct resource. release_resource() unregisters the resource but does not free the allocated memory, thus use release_mem_region() instead to fix the memory leak. Signed-off-by: Axel Lin Signed-off-by: Paul Mundt diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c index 5efbd59..06e41ed 100644 --- a/drivers/rtc/rtc-sh.c +++ b/drivers/rtc/rtc-sh.c @@ -761,7 +761,7 @@ err_unmap: clk_put(rtc->clk); iounmap(rtc->regbase); err_badmap: - release_resource(rtc->res); + release_mem_region(rtc->res->start, rtc->regsize); err_badres: kfree(rtc); @@ -786,7 +786,7 @@ static int __exit sh_rtc_remove(struct platform_device *pdev) } iounmap(rtc->regbase); - release_resource(rtc->res); + release_mem_region(rtc->res->start, rtc->regsize); clk_disable(rtc->clk); clk_put(rtc->clk); -- cgit v0.10.2 From 07397021058b7db468b67f8c41ce29ef6331ab92 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 24 Sep 2010 13:44:11 +0300 Subject: usb: musb: gadget: kill duplicate code in musb_gadget_queue() musb_gadget_queue() checks for '!req->buf' condition twice: in the second case the code is both duplicated and unreachable as the first check returns early. Signed-off-by: Sergei Shtylyov Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index f37b859..36cfd06 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1169,8 +1169,6 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, : DMA_FROM_DEVICE); request->mapped = 0; } - } else if (!req->buf) { - return -ENODATA; } else request->mapped = 0; -- cgit v0.10.2 From b47b30ccdaad5f2fc39a1a65921bffd150574a91 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 8 Nov 2010 01:12:29 +0000 Subject: drm/i915: Avoid might_fault during pwrite whilst holding our mutex ... and so prevent a potential circular reference: [ INFO: possible circular locking dependency detected ] 2.6.37-rc1-uwe1+ #4 ------------------------------------------------------- Xorg/1401 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [] might_fault+0x4b/0xa0 but task is already holding lock: (&dev->struct_mutex){+.+.+.}, at: [] i915_mutex_lock_interruptible+0x3c/0x60 [i915] which lock already depends on the new lock. When the locking around the pwrite ioctl was simplified, I did not spot that the phys path never took any locks and so we introduced this potential circular reference. Reported-by: Uwe Helm Signed-off-by: Chris Wilson diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 984eb6e..eba9b16 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4878,17 +4878,24 @@ i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj, struct drm_file *file_priv) { struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); - void *obj_addr; - int ret; - char __user *user_data; + void *vaddr = obj_priv->phys_obj->handle->vaddr + args->offset; + char __user *user_data = (char __user *) (uintptr_t) args->data_ptr; - user_data = (char __user *) (uintptr_t) args->data_ptr; - obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset; + DRM_DEBUG_DRIVER("vaddr %p, %lld\n", vaddr, args->size); - DRM_DEBUG_DRIVER("obj_addr %p, %lld\n", obj_addr, args->size); - ret = copy_from_user(obj_addr, user_data, args->size); - if (ret) - return -EFAULT; + if (__copy_from_user_inatomic_nocache(vaddr, user_data, args->size)) { + unsigned long unwritten; + + /* The physical object once assigned is fixed for the lifetime + * of the obj, so we can safely drop the lock and continue + * to access vaddr. + */ + mutex_unlock(&dev->struct_mutex); + unwritten = copy_from_user(vaddr, user_data, args->size); + mutex_lock(&dev->struct_mutex); + if (unwritten) + return -EFAULT; + } drm_agp_chipset_flush(dev); return 0; -- cgit v0.10.2 From 08deebf98783d3de553eed2c9b6b8dcc7e168567 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 5 Nov 2010 08:56:38 +0000 Subject: drm/i915/ringbuffer: Use the HEAD auto-reporting mechanism My Sandybridge only reports 0 for the ring buffer registers, causing it to hang as soon as we exhaust the available ring. As a workaround, take advantage of our huge ring buffers and use the auto-reporting mechanism to update the status page with the HEAD location every 64 KiB. Cherry-picked from 6aa56062eaba67adfb247cded244fd877329588d. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31404 Tested-by: Zhao Jian Cc: stable@kernel.org Signed-off-by: Chris Wilson diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 7c1f3ff..b83306f 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -177,7 +177,7 @@ static int init_ring_common(struct drm_device *dev, I915_WRITE_CTL(ring, ((ring->gem_object->size - PAGE_SIZE) & RING_NR_PAGES) - | RING_NO_REPORT | RING_VALID); + | RING_REPORT_64K | RING_VALID); head = I915_READ_HEAD(ring) & HEAD_ADDR; /* If the head is still not zero, the ring is dead */ @@ -692,6 +692,17 @@ int intel_wait_ring_buffer(struct drm_device *dev, { unsigned long end; drm_i915_private_t *dev_priv = dev->dev_private; + u32 head; + + head = intel_read_status_page(ring, 4); + if (head) { + ring->head = head & HEAD_ADDR; + ring->space = ring->head - (ring->tail + 8); + if (ring->space < 0) + ring->space += ring->size; + if (ring->space >= n) + return 0; + } trace_i915_ring_wait_begin (dev); end = jiffies + 3 * HZ; -- cgit v0.10.2 From 1688c3d6000b1183bcb604c8c85f742a579990e5 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Sun, 31 Oct 2010 17:04:09 -0400 Subject: MAINTAINERS: Update mailing list name for Xen pieces. While the 'xen-devel@lists.xen.org' is more apt, it is not yet ready. Revert the name back to the old lists.xensource.com for right now. Signed-off-by: Konrad Rzeszutek Wilk diff --git a/MAINTAINERS b/MAINTAINERS index 0094224..acf13f2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6613,7 +6613,7 @@ F: drivers/xen/*swiotlb* XEN HYPERVISOR INTERFACE M: Jeremy Fitzhardinge M: Konrad Rzeszutek Wilk -L: xen-devel@lists.xen.org +L: xen-devel@lists.xensource.com L: virtualization@lists.osdl.org S: Supported F: arch/x86/xen/ -- cgit v0.10.2 From 07cf2a64c2ad3408a0e12aa4cd6040b30c09381d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 6 Nov 2010 10:06:49 +0100 Subject: xen: fix memory leak in Xen PCI MSI/MSI-X allocator. Stanse found that xen_setup_msi_irqs leaks memory when xen_allocate_pirq fails. Free the memory in that fail path. Signed-off-by: Jiri Slaby Signed-off-by: Konrad Rzeszutek Wilk Cc: xen-devel@lists.xensource.com Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: x86@kernel.org diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index 117f5b8..d7b5109 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -147,8 +147,10 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) irq = xen_allocate_pirq(v[i], 0, /* not sharable */ (type == PCI_CAP_ID_MSIX) ? "pcifront-msi-x" : "pcifront-msi"); - if (irq < 0) - return -1; + if (irq < 0) { + ret = -1; + goto free; + } ret = set_irq_msi(irq, msidesc); if (ret) @@ -164,7 +166,7 @@ error: if (ret == -ENODEV) dev_err(&dev->dev, "Xen PCI frontend has not registered" \ " MSI/MSI-X support!\n"); - +free: kfree(v); return ret; } -- cgit v0.10.2 From c8ac3902fb7a98c45ed54d98ad6f1c8168f47021 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sat, 30 Oct 2010 14:51:30 +0200 Subject: xen-pcifront: Remove duplicate inclusion of headers. In drivers/pci/xen-pcifront.c the xen/xenbus.h header is included twice - once is enough. Signed-off-by: Jesper Juhl Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c index a87c498..0579273 100644 --- a/drivers/pci/xen-pcifront.c +++ b/drivers/pci/xen-pcifront.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From 2a63dd7275b2278bd7e9203f74b9aa4f07e82a7a Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 4 Nov 2010 15:31:30 +0100 Subject: xen-pcifront: fix PCI reference leak Stanse found that when pdev is found and has no driver a reference is leaked in pcifront_common_process. So add pci_dev_put there. For the pdev == NULL case, pci_dev_put(NULL) is fine. [v2: Updated to not dereference pcidev->dev per Milton's observation] Signed-off-by: Jiri Slaby Signed-off-by: Konrad Rzeszutek Wilk Cc: Milton Miller Cc: Jesse Barnes diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c index 0579273..3a5a6fc 100644 --- a/drivers/pci/xen-pcifront.c +++ b/drivers/pci/xen-pcifront.c @@ -575,8 +575,9 @@ static pci_ers_result_t pcifront_common_process(int cmd, pcidev = pci_get_bus_and_slot(bus, devfn); if (!pcidev || !pcidev->driver) { - dev_err(&pcidev->dev, - "device or driver is NULL\n"); + dev_err(&pdev->xdev->dev, "device or AER driver is NULL\n"); + if (pcidev) + pci_dev_put(pcidev); return result; } pdrv = pcidev->driver; -- cgit v0.10.2 From 618763958b2291a09057dbfa553da6ded93dcfad Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 8 Nov 2010 07:28:32 -0500 Subject: cifs: make cifs_ioctl handle NULL filp->private_data correctly Commit 13cfb7334e made cifs_ioctl use the tlink attached to the cifsFileInfo for a filp. This ignores the case of an open directory however, which in CIFS can have a NULL private_data until a readdir is done on it. This patch re-adds the NULL pointer checks that were removed in commit 50ae28f01 and moves the setting of tcon and "caps" variables lower. Long term, a better fix would be to establish a f_op->open routine for directories that populates that field at open time, but that requires some other changes to how readdir calls are handled. Reported-by: Kjell Rune Skaaraas Reviewed-and-Tested-by: Suresh Jayaraman Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c index 2fa22f2..0c98672 100644 --- a/fs/cifs/ioctl.c +++ b/fs/cifs/ioctl.c @@ -38,10 +38,10 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg) struct cifs_sb_info *cifs_sb; #ifdef CONFIG_CIFS_POSIX struct cifsFileInfo *pSMBFile = filep->private_data; - struct cifsTconInfo *tcon = tlink_tcon(pSMBFile->tlink); + struct cifsTconInfo *tcon; __u64 ExtAttrBits = 0; __u64 ExtAttrMask = 0; - __u64 caps = le64_to_cpu(tcon->fsUnixInfo.Capability); + __u64 caps; #endif /* CONFIG_CIFS_POSIX */ xid = GetXid(); @@ -62,6 +62,10 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg) break; #ifdef CONFIG_CIFS_POSIX case FS_IOC_GETFLAGS: + if (pSMBFile == NULL) + break; + tcon = tlink_tcon(pSMBFile->tlink); + caps = le64_to_cpu(tcon->fsUnixInfo.Capability); if (CIFS_UNIX_EXTATTR_CAP & caps) { rc = CIFSGetExtAttr(xid, tcon, pSMBFile->netfid, &ExtAttrBits, &ExtAttrMask); @@ -73,6 +77,10 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg) break; case FS_IOC_SETFLAGS: + if (pSMBFile == NULL) + break; + tcon = tlink_tcon(pSMBFile->tlink); + caps = le64_to_cpu(tcon->fsUnixInfo.Capability); if (CIFS_UNIX_EXTATTR_CAP & caps) { if (get_user(ExtAttrBits, (int __user *)arg)) { rc = -EFAULT; -- cgit v0.10.2 From 1a4ec46a68292515ae84deb8ee5cc2572db1fa99 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 1 Nov 2010 10:34:29 +0000 Subject: solos: Add 'Firmware' attribute for Traverse overall firmware version The existing 'FirmwareVersion' attribute only covers the DSP firmware as provided by Conexant; not the overall version of the device firmware. We do want to be able to see the full version number too. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller diff --git a/drivers/atm/solos-attrlist.c b/drivers/atm/solos-attrlist.c index 1a9332e..9a676ee 100644 --- a/drivers/atm/solos-attrlist.c +++ b/drivers/atm/solos-attrlist.c @@ -1,6 +1,7 @@ SOLOS_ATTR_RO(DriverVersion) SOLOS_ATTR_RO(APIVersion) SOLOS_ATTR_RO(FirmwareVersion) +SOLOS_ATTR_RO(Version) // SOLOS_ATTR_RO(DspVersion) // SOLOS_ATTR_RO(CommonHandshake) SOLOS_ATTR_RO(Connected) -- cgit v0.10.2 From 3ce1227c3c374c742ed78484226e24567f09ff99 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 1 Nov 2010 10:35:28 +0000 Subject: solos: Refuse to upgrade firmware with older FPGA. It doesn't work. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c index f46138a..2e08c99 100644 --- a/drivers/atm/solos-pci.c +++ b/drivers/atm/solos-pci.c @@ -1161,6 +1161,14 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id) dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n", major_ver, minor_ver, fpga_ver); + if (fpga_ver < 37 && (fpga_upgrade || firmware_upgrade || + db_fpga_upgrade || db_firmware_upgrade)) { + dev_warn(&dev->dev, + "FPGA too old; cannot upgrade flash. Use JTAG.\n"); + fpga_upgrade = firmware_upgrade = 0; + db_fpga_upgrade = db_firmware_upgrade = 0; + } + if (card->fpga_version >= DMA_SUPPORTED){ card->using_dma = 1; } else { -- cgit v0.10.2 From 4c46ee52589a4edd67447214eb489b10fed5c53a Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Thu, 4 Nov 2010 11:47:04 +0000 Subject: classifier: report statistics for basic classifier The basic classifier keeps statistics but does not report it to user space. This showed up when using basic classifier (with police) as a default catch all on ingress; no statistics were reported. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/sched/cls_basic.c b/net/sched/cls_basic.c index efd4f95..f23d915 100644 --- a/net/sched/cls_basic.c +++ b/net/sched/cls_basic.c @@ -268,6 +268,10 @@ static int basic_dump(struct tcf_proto *tp, unsigned long fh, goto nla_put_failure; nla_nest_end(skb, nest); + + if (tcf_exts_dump_stats(skb, &f->exts, &basic_ext_map) < 0) + goto nla_put_failure; + return skb->len; nla_put_failure: -- cgit v0.10.2 From f46421416fb6b91513fb687d6503142cd99034a5 Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Fri, 5 Nov 2010 01:56:34 +0000 Subject: ipv6: fix overlap check for fragments The type of FRAG6_CB(prev)->offset is int, skb->len is *unsigned* int, and offset is int. Without this patch, type conversion occurred to this expression, when (FRAG6_CB(prev)->offset + prev->len) is less than offset. Signed-off-by: Shan Wei Signed-off-by: David S. Miller diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c index c7ba314..0f27664 100644 --- a/net/ipv6/reassembly.c +++ b/net/ipv6/reassembly.c @@ -349,7 +349,7 @@ found: /* Check for overlap with preceding fragment. */ if (prev && - (FRAG6_CB(prev)->offset + prev->len) - offset > 0) + (FRAG6_CB(prev)->offset + prev->len) > offset) goto discard_fq; /* Look for overlap with succeeding segment. */ -- cgit v0.10.2 From 63f4e1903ae41b4e457dd4490afe0f59e7641ad6 Mon Sep 17 00:00:00 2001 From: Guillaume Chazarain Date: Sat, 6 Nov 2010 06:39:31 +0000 Subject: skge: Remove tx queue stopping in skge_devinit() After e6484930d7c73d324bccda7d43d131088da697b9: net: allocate tx queues in register_netdevice It causes an Oops at skge_probe() time. Signed-off-by: Guillaume Chazarain Signed-off-by: David S. Miller diff --git a/drivers/net/skge.c b/drivers/net/skge.c index bfec2e0..220e039 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -3858,7 +3858,6 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port, /* device is off until link detection */ netif_carrier_off(dev); - netif_stop_queue(dev); return dev; } -- cgit v0.10.2 From 18543a643fae694982c7d89c22436885f3506497 Mon Sep 17 00:00:00 2001 From: Guillaume Chazarain Date: Sat, 6 Nov 2010 06:39:32 +0000 Subject: net: Detect and ignore netif_stop_queue() calls before register_netdev() After e6484930d7c73d324bccda7d43d131088da697b9: net: allocate tx queues in register_netdevice These calls make net drivers oops at load time, so let's avoid people git-bisect'ing known problems. Signed-off-by: Guillaume Chazarain Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 072652d..d8fd2c2 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1554,6 +1554,11 @@ static inline void netif_tx_wake_all_queues(struct net_device *dev) static inline void netif_tx_stop_queue(struct netdev_queue *dev_queue) { + if (WARN_ON(!dev_queue)) { + printk(KERN_INFO "netif_stop_queue() cannot be called before " + "register_netdev()"); + return; + } set_bit(__QUEUE_STATE_XOFF, &dev_queue->state); } -- cgit v0.10.2 From eb589063ed482f5592b1378e4136d6998419af6e Mon Sep 17 00:00:00 2001 From: Junchang Wang Date: Sun, 7 Nov 2010 23:19:43 +0000 Subject: pktgen: correct uninitialized queue_map This fix a bug reported by backyes. Right the first time pktgen's using queue_map that's not been initialized by set_cur_queue_map(pkt_dev); Signed-off-by: Junchang Wang Signed-off-by: Backyes Signed-off-by: David S. Miller diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 1992cd0..33bc382 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -2612,8 +2612,8 @@ static struct sk_buff *fill_packet_ipv4(struct net_device *odev, /* Update any of the values, used when we're incrementing various * fields. */ - queue_map = pkt_dev->cur_queue_map; mod_cur_headers(pkt_dev); + queue_map = pkt_dev->cur_queue_map; datalen = (odev->hard_header_len + 16) & ~0xf; @@ -2976,8 +2976,8 @@ static struct sk_buff *fill_packet_ipv6(struct net_device *odev, /* Update any of the values, used when we're incrementing various * fields. */ - queue_map = pkt_dev->cur_queue_map; mod_cur_headers(pkt_dev); + queue_map = pkt_dev->cur_queue_map; skb = __netdev_alloc_skb(odev, pkt_dev->cur_pkt_size + 64 -- cgit v0.10.2 From b67d801f922b989e6756579438bd493ad9052bca Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Mon, 8 Nov 2010 03:03:48 +0000 Subject: qeth: remove dev_queue_xmit invocation For a certain Hipersockets specific error code in the xmit path, the qeth driver tries to invoke dev_queue_xmit again. Commit 79640a4ca6955e3ebdb7038508fa7a0cd7fa5527 introduces a busylock causing locking problems in case of re-invoked dev_queue_xmit by qeth. This patch removes the attempts to retry packet sending with dev_queue_xmit from the qeth driver. Signed-off-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 6be43eb..f47a714 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -440,7 +440,6 @@ struct qeth_qdio_out_q { * index of buffer to be filled by driver; state EMPTY or PACKING */ int next_buf_to_fill; - int sync_iqdio_error; /* * number of buffers that are currently filled (PRIMED) * -> these buffers are hardware-owned @@ -695,14 +694,6 @@ struct qeth_mc_mac { int is_vmac; }; -struct qeth_skb_data { - __u32 magic; - int count; -}; - -#define QETH_SKB_MAGIC 0x71657468 -#define QETH_SIGA_CC2_RETRIES 3 - struct qeth_rx { int b_count; int b_index; diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 7642670..09ab6a2 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -877,8 +877,8 @@ out: return; } -static void __qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, - struct qeth_qdio_out_buffer *buf, unsigned int qeth_skip_skb) +static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, + struct qeth_qdio_out_buffer *buf) { int i; struct sk_buff *skb; @@ -887,13 +887,11 @@ static void __qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, if (buf->buffer->element[0].flags & 0x40) atomic_dec(&queue->set_pci_flags_count); - if (!qeth_skip_skb) { + skb = skb_dequeue(&buf->skb_list); + while (skb) { + atomic_dec(&skb->users); + dev_kfree_skb_any(skb); skb = skb_dequeue(&buf->skb_list); - while (skb) { - atomic_dec(&skb->users); - dev_kfree_skb_any(skb); - skb = skb_dequeue(&buf->skb_list); - } } for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) { if (buf->buffer->element[i].addr && buf->is_header[i]) @@ -909,12 +907,6 @@ static void __qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, atomic_set(&buf->state, QETH_QDIO_BUF_EMPTY); } -static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, - struct qeth_qdio_out_buffer *buf) -{ - __qeth_clear_output_buffer(queue, buf, 0); -} - void qeth_clear_qdio_buffers(struct qeth_card *card) { int i, j; @@ -2833,7 +2825,6 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index, } } - queue->sync_iqdio_error = 0; queue->card->dev->trans_start = jiffies; if (queue->card->options.performance_stats) { queue->card->perf_stats.outbound_do_qdio_cnt++; @@ -2849,10 +2840,6 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index, queue->card->perf_stats.outbound_do_qdio_time += qeth_get_micros() - queue->card->perf_stats.outbound_do_qdio_start_time; - if (rc > 0) { - if (!(rc & QDIO_ERROR_SIGA_BUSY)) - queue->sync_iqdio_error = rc & 3; - } if (rc) { queue->card->stats.tx_errors += count; /* ignore temporary SIGA errors without busy condition */ @@ -2940,7 +2927,6 @@ void qeth_qdio_output_handler(struct ccw_device *ccwdev, struct qeth_qdio_out_q *queue = card->qdio.out_qs[__queue]; struct qeth_qdio_out_buffer *buffer; int i; - unsigned qeth_send_err; QETH_CARD_TEXT(card, 6, "qdouhdl"); if (qdio_error & QDIO_ERROR_ACTIVATE_CHECK_CONDITION) { @@ -2956,9 +2942,8 @@ void qeth_qdio_output_handler(struct ccw_device *ccwdev, } for (i = first_element; i < (first_element + count); ++i) { buffer = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q]; - qeth_send_err = qeth_handle_send_error(card, buffer, qdio_error); - __qeth_clear_output_buffer(queue, buffer, - (qeth_send_err == QETH_SEND_ERROR_RETRY) ? 1 : 0); + qeth_handle_send_error(card, buffer, qdio_error); + qeth_clear_output_buffer(queue, buffer); } atomic_sub(count, &queue->used_buffers); /* check if we need to do something on this outbound queue */ @@ -3183,10 +3168,7 @@ int qeth_do_send_packet_fast(struct qeth_card *card, int offset, int hd_len) { struct qeth_qdio_out_buffer *buffer; - struct sk_buff *skb1; - struct qeth_skb_data *retry_ctrl; int index; - int rc; /* spin until we get the queue ... */ while (atomic_cmpxchg(&queue->state, QETH_OUT_Q_UNLOCKED, @@ -3205,25 +3187,6 @@ int qeth_do_send_packet_fast(struct qeth_card *card, atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); qeth_fill_buffer(queue, buffer, skb, hdr, offset, hd_len); qeth_flush_buffers(queue, index, 1); - if (queue->sync_iqdio_error == 2) { - skb1 = skb_dequeue(&buffer->skb_list); - while (skb1) { - atomic_dec(&skb1->users); - skb1 = skb_dequeue(&buffer->skb_list); - } - retry_ctrl = (struct qeth_skb_data *) &skb->cb[16]; - if (retry_ctrl->magic != QETH_SKB_MAGIC) { - retry_ctrl->magic = QETH_SKB_MAGIC; - retry_ctrl->count = 0; - } - if (retry_ctrl->count < QETH_SIGA_CC2_RETRIES) { - retry_ctrl->count++; - rc = dev_queue_xmit(skb); - } else { - dev_kfree_skb_any(skb); - QETH_CARD_TEXT(card, 2, "qrdrop"); - } - } return 0; out: atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); -- cgit v0.10.2 From 0cffef48ebf5060f749d8b04ab0437a4ba009e77 Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Mon, 8 Nov 2010 03:03:49 +0000 Subject: qeth: fix race condition during device startup QDIO is running independent from netdevice state. We are not allowed to schedule NAPI in case the netdevice is not open. Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 09ab6a2..e6b2df0 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2903,7 +2903,7 @@ void qeth_qdio_start_poll(struct ccw_device *ccwdev, int queue, { struct qeth_card *card = (struct qeth_card *)card_ptr; - if (card->dev) + if (card->dev && (card->dev->flags & IFF_UP)) napi_schedule(&card->napi); } EXPORT_SYMBOL_GPL(qeth_qdio_start_poll); -- cgit v0.10.2 From aa58163a76a3aef33c7220931543d45d0fe43753 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Mon, 8 Nov 2010 06:20:50 +0000 Subject: rds: Fix rds message leak in rds_message_map_pages The sgs allocation error path leaks the allocated message. Signed-off-by: Pavel Emelyanov Acked-by: Andy Grover Signed-off-by: David S. Miller diff --git a/net/rds/message.c b/net/rds/message.c index 848cff4..1fd3d29 100644 --- a/net/rds/message.c +++ b/net/rds/message.c @@ -249,8 +249,10 @@ struct rds_message *rds_message_map_pages(unsigned long *page_addrs, unsigned in rm->m_inc.i_hdr.h_len = cpu_to_be32(total_len); rm->data.op_nents = ceil(total_len, PAGE_SIZE); rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs); - if (!rm->data.op_sg) + if (!rm->data.op_sg) { + rds_message_put(rm); return ERR_PTR(-ENOMEM); + } for (i = 0; i < rm->data.op_nents; ++i) { sg_set_page(&rm->data.op_sg[i], -- cgit v0.10.2 From a91be2acc648f18d39b15c6eb7136b0c208e2cab Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 25 Oct 2010 15:04:13 -0700 Subject: usb.h: fix ioctl kernel-doc info Fix struct field name, prevent kernel-doc warnings. Warning(include/linux/usb.h:865): No description found for parameter 'unlocked_ioctl' Warning(include/linux/usb.h:865): Excess struct/union/enum/typedef member 'ioctl' description in 'usb_driver' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/usb.h b/include/linux/usb.h index 35fe6ab..24300d8 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -797,7 +797,7 @@ struct usbdrv_wrap { * @disconnect: Called when the interface is no longer accessible, usually * because its device has been (or is being) disconnected or the * driver module is being unloaded. - * @ioctl: Used for drivers that want to talk to userspace through + * @unlocked_ioctl: Used for drivers that want to talk to userspace through * the "usbfs" filesystem. This lets devices provide ways to * expose information to user space regardless of where they * do (or don't) show up otherwise in the filesystem. -- cgit v0.10.2 From 7fea0f714ffb3f303d4b66933af2df2f5584c9bf Mon Sep 17 00:00:00 2001 From: Sebastien Bourdeauducq Date: Wed, 3 Nov 2010 11:54:12 +0100 Subject: USB: ftdi_sio: add device IDs for Milkymist One JTAG/serial Add the USB IDs for the Milkymist One FTDI-based JTAG/serial adapter (http://projects.qi-hardware.com/index.php/p/mmone-jtag-serial-cable/) to the ftdi_sio driver and disable the first serial channel (used as JTAG from userspace). Signed-off-by: Sebastien Bourdeauducq Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 89a9a58..76f8b35 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -794,6 +794,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) }, + { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 7dfe02f1..263f625 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1100,3 +1100,10 @@ #define FTDI_SCIENCESCOPE_LOGBOOKML_PID 0xFF18 #define FTDI_SCIENCESCOPE_LS_LOGBOOK_PID 0xFF1C #define FTDI_SCIENCESCOPE_HS_LOGBOOK_PID 0xFF1D + +/* + * Milkymist One JTAG/Serial + */ +#define QIHARDWARE_VID 0x20B7 +#define MILKYMISTONE_JTAGSERIAL_PID 0x0713 + -- cgit v0.10.2 From 269e2d77b82d92d8dad543a2375e74372e9d773e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 8 Nov 2010 16:27:12 -0500 Subject: libipw: fix proc entry removal This bug seems to be due to commit 27ae60f8f7aac ("ipw2x00: replace "ieee80211" with "libipw" where appropriate"), where Pavel did this: - libipw_proc = proc_mkdir(DRV_NAME, init_net.proc_net); + libipw_proc = proc_mkdir("ieee80211", init_net.proc_net); but then the cleanup was kept as remove_proc_entry(DRV_NAME, init_net.proc_net); in both places (both in the failure case and in the unload case). The error string is also total crap, and says "Unable to create " DRV_NAME " proc directory\n"); Even though it doesn't actually create a proc directory named DRV_NAME at all. So that patch looks like total and utter crap to me. The commit message says "Keep /proc/net/ieee80211 under the original name to avoid breaking user interface." but the thing is, it really didn't fix anything but that one create thing. It needs to fix all the other cases too. Signed-off-by: Linus Torvalds Tested-by: Randy Dunlap Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index 32dee2c..d5ef696 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -54,6 +54,7 @@ #define DRV_DESCRIPTION "802.11 data/management/control stack" #define DRV_NAME "libipw" +#define DRV_PROCNAME "ieee80211" #define DRV_VERSION LIBIPW_VERSION #define DRV_COPYRIGHT "Copyright (C) 2004-2005 Intel Corporation " @@ -293,16 +294,16 @@ static int __init libipw_init(void) struct proc_dir_entry *e; libipw_debug_level = debug; - libipw_proc = proc_mkdir("ieee80211", init_net.proc_net); + libipw_proc = proc_mkdir(DRV_PROCNAME, init_net.proc_net); if (libipw_proc == NULL) { - LIBIPW_ERROR("Unable to create " DRV_NAME + LIBIPW_ERROR("Unable to create " DRV_PROCNAME " proc directory\n"); return -EIO; } e = proc_create("debug_level", S_IRUGO | S_IWUSR, libipw_proc, &debug_level_proc_fops); if (!e) { - remove_proc_entry(DRV_NAME, init_net.proc_net); + remove_proc_entry(DRV_PROCNAME, init_net.proc_net); libipw_proc = NULL; return -EIO; } @@ -319,7 +320,7 @@ static void __exit libipw_exit(void) #ifdef CONFIG_LIBIPW_DEBUG if (libipw_proc) { remove_proc_entry("debug_level", libipw_proc); - remove_proc_entry(DRV_NAME, init_net.proc_net); + remove_proc_entry(DRV_PROCNAME, init_net.proc_net); libipw_proc = NULL; } #endif /* CONFIG_LIBIPW_DEBUG */ -- cgit v0.10.2 From 5f841b4130a639e5f0fbcf4a9b26045d734e4ee6 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 27 Oct 2010 18:31:15 +0530 Subject: ath9k: Avoid HW opmode overridden on monitor mode changes The HW opmode is blindly set to monitor type on monitor mode change notification. This overrides the opmode when one of the interfaces is still running as non-monitor iftype. So the monitoring information needs to be maintained seperately. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index cc13ee1..c3a4904 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -952,9 +952,12 @@ static void ath9k_hw_set_operating_mode(struct ath_hw *ah, int opmode) REG_SET_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION); break; case NL80211_IFTYPE_STATION: - case NL80211_IFTYPE_MONITOR: REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE); break; + default: + if (ah->is_monitoring) + REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE); + break; } } @@ -1634,7 +1637,6 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period) switch (ah->opmode) { case NL80211_IFTYPE_STATION: - case NL80211_IFTYPE_MONITOR: REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(next_beacon)); REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff); REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff); @@ -1663,6 +1665,14 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period) AR_TBTT_TIMER_EN | AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN; break; default: + if (ah->is_monitoring) { + REG_WRITE(ah, AR_NEXT_TBTT_TIMER, + TU_TO_USEC(next_beacon)); + REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff); + REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff); + flags |= AR_TBTT_TIMER_EN; + break; + } ath_print(ath9k_hw_common(ah), ATH_DBG_BEACON, "%s: unsupported opmode: %d\n", __func__, ah->opmode); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index d032939..d47d1b4 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -622,6 +622,7 @@ struct ath_hw { bool sw_mgmt_crypto; bool is_pciexpress; + bool is_monitoring; bool need_an_top2_fixup; u16 tx_trig_level; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index b52f1cf..cf6fa54 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1217,6 +1217,7 @@ static int ath9k_start(struct ieee80211_hw *hw) ah->imask |= ATH9K_INT_CST; sc->sc_flags &= ~SC_OP_INVALID; + sc->sc_ah->is_monitoring = false; /* Disable BMISS interrupt when we're not associated */ ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); @@ -1493,8 +1494,7 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, ath9k_hw_set_interrupts(ah, ah->imask); if (vif->type == NL80211_IFTYPE_AP || - vif->type == NL80211_IFTYPE_ADHOC || - vif->type == NL80211_IFTYPE_MONITOR) { + vif->type == NL80211_IFTYPE_ADHOC) { sc->sc_flags |= SC_OP_ANI_RUN; ath_start_ani(common); } @@ -1644,8 +1644,12 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) if (changed & IEEE80211_CONF_CHANGE_MONITOR) { if (conf->flags & IEEE80211_CONF_MONITOR) { ath_print(common, ATH_DBG_CONFIG, - "HW opmode set to Monitor mode\n"); - sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR; + "Monitor mode is enabled\n"); + sc->sc_ah->is_monitoring = true; + } else { + ath_print(common, ATH_DBG_CONFIG, + "Monitor mode is disabled\n"); + sc->sc_ah->is_monitoring = false; } } diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index fddb012..c76ea53 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -441,7 +441,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc) */ if (((sc->sc_ah->opmode != NL80211_IFTYPE_AP) && (sc->rx.rxfilter & FIF_PROMISC_IN_BSS)) || - (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR)) + (sc->sc_ah->is_monitoring)) rfilt |= ATH9K_RX_FILTER_PROM; if (sc->rx.rxfilter & FIF_CONTROL) @@ -897,7 +897,7 @@ static bool ath9k_rx_accept(struct ath_common *common, * decryption and MIC failures. For monitor mode, * we also ignore the CRC error. */ - if (ah->opmode == NL80211_IFTYPE_MONITOR) { + if (ah->is_monitoring) { if (rx_stats->rs_status & ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | ATH9K_RXERR_CRC)) -- cgit v0.10.2 From 10598c124ecabbbfd7522f74de19b8f7d52a1bee Mon Sep 17 00:00:00 2001 From: Vivek Natarajan Date: Sat, 30 Oct 2010 22:05:13 +0530 Subject: ath9k: Fix a DMA latency issue for Intel Pinetrail platforms. Throughput was severely affected in Intel Pinetrail platforms because of a DMA problem in C3 state. This patch fixes this issue. Signed-off-by: Vivek Natarajan CC: Johannes Berg Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 9b8e7e3..170d44a 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -675,6 +675,7 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz) } extern struct ieee80211_ops ath9k_ops; +extern struct pm_qos_request_list ath9k_pm_qos_req; extern int modparam_nohwcrypt; extern int led_blink; diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 95b41db..6a0d99e 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -15,6 +15,7 @@ */ #include +#include #include "ath9k.h" @@ -179,6 +180,8 @@ static const struct ath_ops ath9k_common_ops = { .write = ath9k_iowrite32, }; +struct pm_qos_request_list ath9k_pm_qos_req; + /**************************/ /* Initialization */ /**************************/ @@ -756,6 +759,9 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid, ath_init_leds(sc); ath_start_rfkill_poll(sc); + pm_qos_add_request(&ath9k_pm_qos_req, PM_QOS_CPU_DMA_LATENCY, + PM_QOS_DEFAULT_VALUE); + return 0; error_world: @@ -811,6 +817,8 @@ void ath9k_deinit_device(struct ath_softc *sc) ath9k_ps_wakeup(sc); + pm_qos_remove_request(&ath9k_pm_qos_req); + wiphy_rfkill_stop_polling(sc->hw->wiphy); ath_deinit_leds(sc); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index cf6fa54..09dcdd7 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -15,6 +15,7 @@ */ #include +#include #include "ath9k.h" #include "btcoex.h" @@ -1239,6 +1240,8 @@ static int ath9k_start(struct ieee80211_hw *hw) ath9k_btcoex_timer_resume(sc); } + pm_qos_update_request(&ath9k_pm_qos_req, 55); + mutex_unlock: mutex_unlock(&sc->mutex); @@ -1416,6 +1419,8 @@ static void ath9k_stop(struct ieee80211_hw *hw) sc->sc_flags |= SC_OP_INVALID; + pm_qos_update_request(&ath9k_pm_qos_req, PM_QOS_DEFAULT_VALUE); + mutex_unlock(&sc->mutex); ath_print(common, ATH_DBG_CONFIG, "Driver halt\n"); -- cgit v0.10.2 From 8df86db9060ddd123d172c7adb6b2b71f31e77cd Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 30 Oct 2010 19:46:37 +0200 Subject: carl9170: usbid table updates This patch includes the following updates: * add D-Link DWA-130 Rev D * Netgear has three WNDA3100 versions. the original WNDA3100 is now called WNDA3100v1. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c index d8607f4..3317039 100644 --- a/drivers/net/wireless/ath/carl9170/usb.c +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -82,9 +82,11 @@ static struct usb_device_id carl9170_usb_ids[] = { { USB_DEVICE(0x07d1, 0x3c10) }, /* D-Link DWA 160 A2 */ { USB_DEVICE(0x07d1, 0x3a09) }, + /* D-Link DWA 130 D */ + { USB_DEVICE(0x07d1, 0x3a0f) }, /* Netgear WNA1000 */ { USB_DEVICE(0x0846, 0x9040) }, - /* Netgear WNDA3100 */ + /* Netgear WNDA3100 (v1) */ { USB_DEVICE(0x0846, 0x9010) }, /* Netgear WN111 v2 */ { USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED }, -- cgit v0.10.2 From 3cc25e510dfc36dc62ee0aa87344b36ed7c1742a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 31 Oct 2010 15:31:54 +0100 Subject: cfg80211: fix a crash in dev lookup on dump commands IS_ERR and PTR_ERR were called with the wrong pointer, leading to a crash when cfg80211_get_dev_from_ifindex fails. Signed-off-by: Felix Fietkau Acked-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index c506241..4e78e3f 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -224,8 +224,8 @@ static int nl80211_prepare_netdev_dump(struct sk_buff *skb, } *rdev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx); - if (IS_ERR(dev)) { - err = PTR_ERR(dev); + if (IS_ERR(*rdev)) { + err = PTR_ERR(*rdev); goto out_rtnl; } -- cgit v0.10.2 From fbb078fcd2fa83646ad9504d8e4c54a67b8729ae Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 3 Nov 2010 01:36:51 +0100 Subject: ath9k: check old power mode before clearing cycle counters ath9k_ps_wakeup() clears the cycle counters after waking up the hardware using ath9k_hw_setpower, however if power save is disabled, then the counters will contain useful data, which then gets discarded. Fix this by checking the old power mode before discarding any data. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 09dcdd7..25d3ef4 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -94,11 +94,13 @@ void ath9k_ps_wakeup(struct ath_softc *sc) { struct ath_common *common = ath9k_hw_common(sc->sc_ah); unsigned long flags; + enum ath9k_power_mode power_mode; spin_lock_irqsave(&sc->sc_pm_lock, flags); if (++sc->ps_usecount != 1) goto unlock; + power_mode = sc->sc_ah->power_mode; ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE); /* @@ -106,10 +108,12 @@ void ath9k_ps_wakeup(struct ath_softc *sc) * useful data. Better clear them now so that they don't mess up * survey data results. */ - spin_lock(&common->cc_lock); - ath_hw_cycle_counters_update(common); - memset(&common->cc_survey, 0, sizeof(common->cc_survey)); - spin_unlock(&common->cc_lock); + if (power_mode != ATH9K_PM_AWAKE) { + spin_lock(&common->cc_lock); + ath_hw_cycle_counters_update(common); + memset(&common->cc_survey, 0, sizeof(common->cc_survey)); + spin_unlock(&common->cc_lock); + } unlock: spin_unlock_irqrestore(&sc->sc_pm_lock, flags); -- cgit v0.10.2 From 352ffad646c0e0c5cf9ae8cea99710ee0d66ee27 Mon Sep 17 00:00:00 2001 From: Brian Cavagnolo Date: Thu, 4 Nov 2010 16:59:28 -0700 Subject: mac80211: unset SDATA_STATE_OFFCHANNEL when cancelling a scan For client STA interfaces, ieee80211_do_stop unsets the relevant interface's SDATA_STATE_RUNNING state bit prior to cancelling an interrupted scan. When ieee80211_offchannel_return is invoked as part of cancelling the scan, it doesn't bother unsetting the SDATA_STATE_OFFCHANNEL bit because it sees that the interface is down. Normally this doesn't matter because when the client STA interface is brought back up, it will probably issue a scan. But in some cases (e.g., the user changes the interface type while it is down), the SDATA_STATE_OFFCHANNEL bit will remain set. This prevents the interface queues from being started. So we cancel the scan before unsetting the SDATA_STATE_RUNNING bit. Signed-off-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index f9163b1..7aa8559 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -391,6 +391,9 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, u32 hw_reconf_flags = 0; int i; + if (local->scan_sdata == sdata) + ieee80211_scan_cancel(local); + clear_bit(SDATA_STATE_RUNNING, &sdata->state); /* @@ -523,9 +526,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, synchronize_rcu(); skb_queue_purge(&sdata->skb_queue); - if (local->scan_sdata == sdata) - ieee80211_scan_cancel(local); - /* * Disable beaconing here for mesh only, AP and IBSS * are already taken care of. -- cgit v0.10.2 From 2e30168ba7dba95710aaadf12b2a97163df067b1 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 4 Nov 2010 21:21:52 +0000 Subject: libertas: terminate scan when stopping interface There are currently no provisions in place to ensure that the scanning task has been stopped when the interface is stopped or removed. This can result in a WARNING at net/wireless/core.c:643 and other badness when you remove the module while a scan is happening. Terminate the scanning task during interface stop. Signed-off-by: Daniel Drake Acked-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 5046a00..373930a 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -700,8 +700,9 @@ static void lbs_scan_worker(struct work_struct *work) if (priv->scan_channel < priv->scan_req->n_channels) { cancel_delayed_work(&priv->scan_work); - queue_delayed_work(priv->work_thread, &priv->scan_work, - msecs_to_jiffies(300)); + if (!priv->stopping) + queue_delayed_work(priv->work_thread, &priv->scan_work, + msecs_to_jiffies(300)); } /* This is the final data we are about to send */ diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index f062ed5..cb14c38 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -36,6 +36,7 @@ struct lbs_private { /* CFG80211 */ struct wireless_dev *wdev; bool wiphy_registered; + bool stopping; struct cfg80211_scan_request *scan_req; u8 assoc_bss[ETH_ALEN]; u8 disassoc_reason; diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 47ce5a6..46b88b1 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -104,6 +104,7 @@ static int lbs_dev_open(struct net_device *dev) lbs_deb_enter(LBS_DEB_NET); spin_lock_irq(&priv->driver_lock); + priv->stopping = false; if (priv->connect_status == LBS_CONNECTED) netif_carrier_on(dev); @@ -131,10 +132,16 @@ static int lbs_eth_stop(struct net_device *dev) lbs_deb_enter(LBS_DEB_NET); spin_lock_irq(&priv->driver_lock); + priv->stopping = true; netif_stop_queue(dev); spin_unlock_irq(&priv->driver_lock); schedule_work(&priv->mcast_work); + cancel_delayed_work_sync(&priv->scan_work); + if (priv->scan_req) { + cfg80211_scan_done(priv->scan_req, false); + priv->scan_req = NULL; + } lbs_deb_leave(LBS_DEB_NET); return 0; -- cgit v0.10.2 From f119da3015712dc32bdf1c311652479e02dcb49a Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Thu, 4 Nov 2010 17:41:25 -0700 Subject: ath9k_hw: Fix AR9280 surprise removal during frequent idle on/off Bit 22 of AR_WA should be set to fix the situation where chip reset is asynchronous to clock of analog shift registers, such that when reset is released, it could mess up the values of analog shift registers and cause some hw issue on AR9280. This bit is write only, but the driver does a read-modify-write on AR_WA without setting bit 22 in ar9002_hw_configpcipowersave() during radio disable. This causes surprise removal of hw. It can never recover from this state and the hw will become usable only after a power on/off cycle, and sometimes only during a cold reboot. This issue can be triggered by doing frequent roaming with the simple/test-roam script available from the wifi-test project [1] when roaming between APs quickly. When roaming there is a is a high possibility that the device being put into idle (radio disable) state by mac80211 during AUTH->ASSOC. A device hardware reset would fail and the kernel would output: [40251.363799] ath: AWAKE -> FULL-SLEEP [40251.363815] ieee80211 phy17: device no longer idle - working [40251.363817] ath: Marking phy17 as not-idle [40251.363819] ath: FULL-SLEEP -> AWAKE [40251.415978] pciehp 0000:00:1c.3:pcie04: Card not present on Slot(3) [40251.419896] ath: ah->misc_mode 0x4 [40251.428138] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3) [40251.532247] ath: timeout (100000 us) on reg 0x9860: 0xffffffff & 0x00000001 != 0x00000000 [40251.532250] ath: Unable to reset channel (2462 MHz), reset status -5 [40251.532422] ath: Set channel: 5745 MHz [40251.540639] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.548826] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.557023] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.565211] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.573415] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.581603] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.581606] ath: Failed to stop TX DMA. Resetting hardware! [40251.592679] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff [40251.703330] ath: timeout (100000 us) on reg 0x7000: 0xffffffff & 0x00000003 != 0x00000000 [40251.703333] ath: RTC stuck in MAC reset [40251.703334] ath: Chip reset failed [40251.703335] ath: Unable to reset hardware; reset status -22 This is currently only reproducible with some HB92 (Half Mini-PCIE) cards but the fix applies to all AR9280 cards. This patch fixes this issue by setting bit 22 during radio disable. This patch has fixes for all kernels that has ath9k. [1] http://wireless.kernel.org/en/developers/Testing/wifi-test Cc: kyungwan.nam@atheros.com Cc: amod.bodas@atheros.com Cc: david.quan@atheros.com Cc: stable@kernel.org Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index a0471f2..48261b7 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -410,6 +410,9 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah, val &= ~(AR_WA_BIT6 | AR_WA_BIT7); } + if (AR_SREV_9280(ah)) + val |= AR_WA_BIT22; + if (AR_SREV_9285E_20(ah)) val |= AR_WA_BIT23; diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 42976b0..fa05b71 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -703,6 +703,7 @@ #define AR_WA_RESET_EN (1 << 18) /* Sw Control to enable PCI-Reset to POR (bit 15) */ #define AR_WA_ANALOG_SHIFT (1 << 20) #define AR_WA_POR_SHORT (1 << 21) /* PCI-E Phy reset control */ +#define AR_WA_BIT22 (1 << 22) #define AR9285_WA_DEFAULT 0x004a050b #define AR9280_WA_DEFAULT 0x0040073b #define AR_WA_DEFAULT 0x0000073f -- cgit v0.10.2 From ac618d70aeb681df7b77c1107fdf26f3249f855f Mon Sep 17 00:00:00 2001 From: Haitao Zhang Date: Sun, 7 Nov 2010 12:50:24 +0800 Subject: ath9k_htc: Add support for device ID 3346 This patch adds support for USB dongle with device ID 3346 from IMC Networks. Signed-off-by: Haitao Zhang Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 6576f68..2f6b1e9 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -35,6 +35,7 @@ static struct usb_device_id ath9k_hif_usb_ids[] = { { USB_DEVICE(0x07D1, 0x3A10) }, /* Dlink Wireless 150 */ { USB_DEVICE(0x13D3, 0x3327) }, /* Azurewave */ { USB_DEVICE(0x13D3, 0x3328) }, /* Azurewave */ + { USB_DEVICE(0x13D3, 0x3346) }, /* IMC Networks */ { USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */ { USB_DEVICE(0x083A, 0xA704) }, /* SMC Networks */ { }, -- cgit v0.10.2 From 490b3f4eacab3220383d2db49255a73995ecdf25 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Mon, 8 Nov 2010 12:49:12 +0530 Subject: ath9k_htc: Fix probe failure if CONFIG_USB_DEBUG enabled Since the endpoint descriptors (EP3 & EP4) were changed from Interrupt to Bulk type by firmware, the urb submission done on Bulk pipes. And the recent commit "check the endpoint type against the pipe type" added aditional error checking against pipe types under CONFIG_USB_DEBUG. So bmAttribute has to be updated for both EP3 & EP4 before submitting urbs on that pipe. This patch resolves the following failure. [ 2215.710936] usb 1-1: usb_probe_device [ 2215.710945] usb 1-1: configuration #1 chosen from 1 choice [ 2215.711152] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 2215.711252] ath9k_hif_usb 1-1:1.0: usb_probe_interface [ 2215.711255] ath9k_hif_usb 1-1:1.0: usb_probe_interface - got id [ 2215.712780] usb 1-1: BOGUS urb xfer, pipe 3 != type 1 [ 2215.713782] usb 1-1: ath9k_htc: Unable to allocate URBs [ 2215.713801] ath9k_hif_usb: probe of 1-1:1.0 failed with error -22 Reported-by: Ming Lei Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 2f6b1e9..f7ec31b 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -541,11 +541,11 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb) return; } - usb_fill_int_urb(urb, hif_dev->udev, + usb_fill_bulk_urb(urb, hif_dev->udev, usb_rcvbulkpipe(hif_dev->udev, USB_REG_IN_PIPE), nskb->data, MAX_REG_IN_BUF_SIZE, - ath9k_hif_usb_reg_in_cb, nskb, 1); + ath9k_hif_usb_reg_in_cb, nskb); ret = usb_submit_urb(urb, GFP_ATOMIC); if (ret) { @@ -721,11 +721,11 @@ static int ath9k_hif_usb_alloc_reg_in_urb(struct hif_device_usb *hif_dev) if (!skb) goto err; - usb_fill_int_urb(hif_dev->reg_in_urb, hif_dev->udev, + usb_fill_bulk_urb(hif_dev->reg_in_urb, hif_dev->udev, usb_rcvbulkpipe(hif_dev->udev, USB_REG_IN_PIPE), skb->data, MAX_REG_IN_BUF_SIZE, - ath9k_hif_usb_reg_in_cb, skb, 1); + ath9k_hif_usb_reg_in_cb, skb); if (usb_submit_urb(hif_dev->reg_in_urb, GFP_KERNEL) != 0) goto err; @@ -844,14 +844,6 @@ static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev) goto err_fw_req; } - /* Alloc URBs */ - ret = ath9k_hif_usb_alloc_urbs(hif_dev); - if (ret) { - dev_err(&hif_dev->udev->dev, - "ath9k_htc: Unable to allocate URBs\n"); - goto err_urb; - } - /* Download firmware */ ret = ath9k_hif_usb_download_fw(hif_dev); if (ret) { @@ -867,16 +859,22 @@ static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev) */ for (idx = 0; idx < alt->desc.bNumEndpoints; idx++) { endp = &alt->endpoint[idx].desc; - if (((endp->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) - == 0x04) && - ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_INT)) { + if ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_INT) { endp->bmAttributes &= ~USB_ENDPOINT_XFERTYPE_MASK; endp->bmAttributes |= USB_ENDPOINT_XFER_BULK; endp->bInterval = 0; } } + /* Alloc URBs */ + ret = ath9k_hif_usb_alloc_urbs(hif_dev); + if (ret) { + dev_err(&hif_dev->udev->dev, + "ath9k_htc: Unable to allocate URBs\n"); + goto err_urb; + } + return 0; err_fw_download: -- cgit v0.10.2 From 48a7c3df14d0cda850337a9b3f9e667a0b12a996 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Mon, 8 Nov 2010 20:40:53 +0530 Subject: ath9k_hw: Fix memory leak on ath9k_hw_rf_alloc_ext_banks failure The allocated externel radio banks have to be freed in case of ath9k_hw_rf_alloc_ext_banks failure. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index c3a4904..6ebc68b 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -484,6 +484,7 @@ static int ath9k_hw_post_init(struct ath_hw *ah) ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL, "Failed allocating banks for " "external radio\n"); + ath9k_hw_rf_free_ext_banks(ah); return ecode; } -- cgit v0.10.2 From 0e15482566b752718e7225168380904f1d0cdfa3 Mon Sep 17 00:00:00 2001 From: Meelis Roos Date: Mon, 8 Nov 2010 13:38:14 -0800 Subject: sparc: fix openpromfs compile Fix openpromfs compilation by adding a missing semicolon in fs/openpromfs/inode.c openprom_mount(). Signed-off-by: Meelis Roos Signed-off-by: David S. Miller Signed-off-by: Linus Torvalds diff --git a/fs/openpromfs/inode.c b/fs/openpromfs/inode.c index ddb1f41..911e61f 100644 --- a/fs/openpromfs/inode.c +++ b/fs/openpromfs/inode.c @@ -418,7 +418,7 @@ out_no_root: static struct dentry *openprom_mount(struct file_system_type *fs_type, int flags, const char *dev_name, void *data) { - return mount_single(fs_type, flags, data, openprom_fill_super) + return mount_single(fs_type, flags, data, openprom_fill_super); } static struct file_system_type openprom_fs_type = { -- cgit v0.10.2 From 2c2742da1e590f426e8d85ce4e33b69142245fb8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 5 Nov 2010 07:35:35 -0300 Subject: [media] BZ#22292: dibx000_common: Restore i2c algo pointer Commit a90f933507859941c4a58028d7593a80f57895c4 accidentally removed the piece of code setting the i2c algo pointer. Restore it. That's what happens when you put two code statements on the same line... Signed-off-by: Jean Delvare Tested by: Chris Clayton Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/dibx000_common.c b/drivers/media/dvb/frontends/dibx000_common.c index a499102..2311c0a 100644 --- a/drivers/media/dvb/frontends/dibx000_common.c +++ b/drivers/media/dvb/frontends/dibx000_common.c @@ -130,6 +130,7 @@ static int i2c_adapter_init(struct i2c_adapter *i2c_adap, struct dibx000_i2c_master *mst) { strncpy(i2c_adap->name, name, sizeof(i2c_adap->name)); + i2c_adap->algo = algo; i2c_adap->algo_data = NULL; i2c_set_adapdata(i2c_adap, mst); if (i2c_add_adapter(i2c_adap) < 0) -- cgit v0.10.2 From 0edf2e5e2bd0ae7689ce8a57ae3c87cc1f0c6548 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 27 Oct 2010 09:30:32 -0300 Subject: [media] v4l: kill the BKL All of the hard problems for BKL removal appear to be solved in the v4l-dvb/master tree. This removes the BKL from the various open functions that do not need it, or only use it to protect an open count. The zoran driver is nontrivial in this regard, so I introduce a new mutex that locks both the open/release and the ioctl functions. Someone with access to the hardware can probably improve that by using the existing lock in all cases. Finally, all drivers that still use the locked version of the ioctl function now get called under a new mutex instead of the BKL. Signed-off-by: Arnd Bergmann Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index bad2ced..a28541b 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -19,7 +19,6 @@ comment "Multimedia core support" config VIDEO_DEV tristate "Video For Linux" - depends on BKL # used in many drivers for ioctl handling, need to kill ---help--- V4L core support for video capture and overlay devices, webcams and AM/FM radio cards. diff --git a/drivers/media/video/cx231xx/cx231xx-417.c b/drivers/media/video/cx231xx/cx231xx-417.c index aab21f3..4c7cac3 100644 --- a/drivers/media/video/cx231xx/cx231xx-417.c +++ b/drivers/media/video/cx231xx/cx231xx-417.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include @@ -1927,10 +1926,9 @@ static int mpeg_open(struct file *file) dev = h; } - if (dev == NULL) { - unlock_kernel(); + if (dev == NULL) return -ENODEV; - } + mutex_lock(&dev->lock); /* allocate + initialize per filehandle data */ diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index a6cc12f..9a98dc5 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include @@ -1576,12 +1575,8 @@ static int mpeg_open(struct file *file) /* allocate + initialize per filehandle data */ fh = kzalloc(sizeof(*fh), GFP_KERNEL); - if (NULL == fh) { - unlock_kernel(); + if (!fh) return -ENOMEM; - } - - lock_kernel(); file->private_data = fh; fh->dev = dev; @@ -1592,8 +1587,6 @@ static int mpeg_open(struct file *file) V4L2_FIELD_INTERLACED, sizeof(struct cx23885_buffer), fh, NULL); - unlock_kernel(); - return 0; } diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 93af9c6..3cc9f46 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include @@ -743,8 +742,6 @@ static int video_open(struct file *file) if (NULL == fh) return -ENOMEM; - lock_kernel(); - file->private_data = fh; fh->dev = dev; fh->radio = radio; @@ -762,8 +759,6 @@ static int video_open(struct file *file) dprintk(1, "post videobuf_queue_init()\n"); - unlock_kernel(); - return 0; } diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c index 41d0166..41360d7 100644 --- a/drivers/media/video/se401.c +++ b/drivers/media/video/se401.c @@ -31,7 +31,6 @@ static const char version[] = "0.24"; #include #include #include -#include #include #include #include "se401.h" @@ -951,9 +950,9 @@ static int se401_open(struct file *file) struct usb_se401 *se401 = (struct usb_se401 *)dev; int err = 0; - lock_kernel(); + mutex_lock(&se401->lock); if (se401->user) { - unlock_kernel(); + mutex_unlock(&se401->lock); return -EBUSY; } se401->fbuf = rvmalloc(se401->maxframesize * SE401_NUMFRAMES); @@ -962,7 +961,7 @@ static int se401_open(struct file *file) else err = -ENOMEM; se401->user = !err; - unlock_kernel(); + mutex_unlock(&se401->lock); return err; } diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index f07a0f6..b5afe5f 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include @@ -673,14 +672,11 @@ static int v4l_stk_open(struct file *fp) vdev = video_devdata(fp); dev = vdev_to_camera(vdev); - lock_kernel(); if (dev == NULL || !is_present(dev)) { - unlock_kernel(); return -ENXIO; } fp->private_data = dev; usb_autopm_get_interface(dev->interface); - unlock_kernel(); return 0; } diff --git a/drivers/media/video/tlg2300/pd-main.c b/drivers/media/video/tlg2300/pd-main.c index 4555f4a..c91424c 100644 --- a/drivers/media/video/tlg2300/pd-main.c +++ b/drivers/media/video/tlg2300/pd-main.c @@ -36,7 +36,6 @@ #include #include #include -#include #include "vendorcmds.h" #include "pd-common.h" @@ -485,15 +484,11 @@ static void poseidon_disconnect(struct usb_interface *interface) /*unregister v4l2 device */ v4l2_device_unregister(&pd->v4l2_dev); - lock_kernel(); - { - pd_dvb_usb_device_exit(pd); - poseidon_fm_exit(pd); + pd_dvb_usb_device_exit(pd); + poseidon_fm_exit(pd); - poseidon_audio_free(pd); - pd_video_exit(pd); - } - unlock_kernel(); + poseidon_audio_free(pd); + pd_video_exit(pd); usb_set_intfdata(interface, NULL); kref_put(&pd->kref, poseidon_delete); diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index 5d6fd01..dc17cce 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include #include @@ -483,29 +482,28 @@ vicam_open(struct file *file) return -EINVAL; } - /* the videodev_lock held above us protects us from - * simultaneous opens...for now. we probably shouldn't - * rely on this fact forever. + /* cam_lock/open_count protects us from simultaneous opens + * ... for now. we probably shouldn't rely on this fact forever. */ - lock_kernel(); + mutex_lock(&cam->cam_lock); if (cam->open_count > 0) { printk(KERN_INFO "vicam_open called on already opened camera"); - unlock_kernel(); + mutex_unlock(&cam->cam_lock); return -EBUSY; } cam->raw_image = kmalloc(VICAM_MAX_READ_SIZE, GFP_KERNEL); if (!cam->raw_image) { - unlock_kernel(); + mutex_unlock(&cam->cam_lock); return -ENOMEM; } cam->framebuf = rvmalloc(VICAM_MAX_FRAME_SIZE * VICAM_FRAMES); if (!cam->framebuf) { kfree(cam->raw_image); - unlock_kernel(); + mutex_unlock(&cam->cam_lock); return -ENOMEM; } @@ -513,10 +511,17 @@ vicam_open(struct file *file) if (!cam->cntrlbuf) { kfree(cam->raw_image); rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES); - unlock_kernel(); + mutex_unlock(&cam->cam_lock); return -ENOMEM; } + cam->needsDummyRead = 1; + cam->open_count++; + + file->private_data = cam; + mutex_unlock(&cam->cam_lock); + + // First upload firmware, then turn the camera on if (!cam->is_initialized) { @@ -527,12 +532,6 @@ vicam_open(struct file *file) set_camera_power(cam, 1); - cam->needsDummyRead = 1; - cam->open_count++; - - file->private_data = cam; - unlock_kernel(); - return 0; } diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 0ca7978..03f7f46 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include @@ -247,10 +246,12 @@ static long v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) mutex_unlock(vdev->lock); } else if (vdev->fops->ioctl) { /* TODO: convert all drivers to unlocked_ioctl */ - lock_kernel(); + static DEFINE_MUTEX(v4l2_ioctl_mutex); + + mutex_lock(&v4l2_ioctl_mutex); if (video_is_registered(vdev)) ret = vdev->fops->ioctl(filp, cmd, arg); - unlock_kernel(); + mutex_unlock(&v4l2_ioctl_mutex); } else ret = -ENOTTY; diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 37fe161..27f0555 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -388,6 +388,7 @@ struct zoran { struct videocodec *vfe; /* video front end */ struct mutex resource_lock; /* prevent evil stuff */ + struct mutex other_lock; /* please merge with above */ u8 initialized; /* flag if zoran has been correctly initialized */ int user; /* number of current users */ diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 0aac376..7e6d624 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -1227,6 +1227,7 @@ static int __devinit zoran_probe(struct pci_dev *pdev, snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); spin_lock_init(&zr->spinlock); mutex_init(&zr->resource_lock); + mutex_init(&zr->other_lock); if (pci_enable_device(pdev)) goto zr_unreg; pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision); diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 401082b..67a52e8 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -49,7 +49,6 @@ #include #include #include -#include #include #include #include @@ -913,7 +912,7 @@ static int zoran_open(struct file *file) dprintk(2, KERN_INFO "%s: %s(%s, pid=[%d]), users(-)=%d\n", ZR_DEVNAME(zr), __func__, current->comm, task_pid_nr(current), zr->user + 1); - lock_kernel(); + mutex_lock(&zr->other_lock); if (zr->user >= 2048) { dprintk(1, KERN_ERR "%s: too many users (%d) on device\n", @@ -963,14 +962,14 @@ static int zoran_open(struct file *file) file->private_data = fh; fh->zr = zr; zoran_open_init_session(fh); - unlock_kernel(); + mutex_unlock(&zr->other_lock); return 0; fail_fh: kfree(fh); fail_unlock: - unlock_kernel(); + mutex_unlock(&zr->other_lock); dprintk(2, KERN_INFO "%s: open failed (%d), users(-)=%d\n", ZR_DEVNAME(zr), res, zr->user); @@ -989,7 +988,7 @@ zoran_close(struct file *file) /* kernel locks (fs/device.c), so don't do that ourselves * (prevents deadlocks) */ - /*mutex_lock(&zr->resource_lock);*/ + mutex_lock(&zr->other_lock); zoran_close_end_session(fh); @@ -1023,6 +1022,7 @@ zoran_close(struct file *file) encoder_call(zr, video, s_routing, 2, 0, 0); } } + mutex_unlock(&zr->other_lock); file->private_data = NULL; kfree(fh->overlay_mask); @@ -3370,11 +3370,26 @@ static const struct v4l2_ioctl_ops zoran_ioctl_ops = { #endif }; +/* please use zr->resource_lock consistently and kill this wrapper */ +static long zoran_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + int ret; + + mutex_lock(&zr->other_lock); + ret = video_ioctl2(file, cmd, arg); + mutex_unlock(&zr->other_lock); + + return ret; +} + static const struct v4l2_file_operations zoran_fops = { .owner = THIS_MODULE, .open = zoran_open, .release = zoran_close, - .ioctl = video_ioctl2, + .unlocked_ioctl = zoran_ioctl, .read = zoran_read, .write = zoran_write, .mmap = zoran_mmap, -- cgit v0.10.2 From dfcccd3aaba15e4e8ffae65fb2a757b3e49470de Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 8 Nov 2010 06:48:00 +0000 Subject: arm: omap1: devices: need to return with a value Get rid of the following warning: arch/arm/mach-omap1/devices.c: In function 'omap_init_wdt': arch/arm/mach-omap1/devices.c:298: warning: 'return' with no value, in function returning non-void while at that, also change: platform_device_register(); return 0; into: return platform_device_register(); Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index ea0d80a..e7f9ee6 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -321,10 +321,9 @@ static struct platform_device omap_wdt_device = { static int __init omap_init_wdt(void) { if (!cpu_is_omap16xx()) - return; + return -ENODEV; - platform_device_register(&omap_wdt_device); - return 0; + return platform_device_register(&omap_wdt_device); } subsys_initcall(omap_init_wdt); #endif -- cgit v0.10.2 From 3f8ff0e72d75fdbe7f2cba2c4015fd9fdd9e13fd Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 8 Nov 2010 23:20:52 +0000 Subject: drm/i915: Fix LVDS fixed-mode regression from 219adae1 Commit 219adae1 cached the EDID found during LVDS init, but in the process prevented the init routine from discovering the preferred fixed-mode for the panel. This was causing us to guess the correct mode, which sometimes is wide of the mark. Reported-and-tested-by: Jon Masters Signed-off-by: Chris Wilson diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f1a6499..4324a32 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -481,11 +481,8 @@ static int intel_lvds_get_modes(struct drm_connector *connector) struct drm_device *dev = connector->dev; struct drm_display_mode *mode; - if (intel_lvds->edid) { - drm_mode_connector_update_edid_property(connector, - intel_lvds->edid); + if (intel_lvds->edid) return drm_add_edid_modes(connector, intel_lvds->edid); - } mode = drm_mode_duplicate(dev, intel_lvds->fixed_mode); if (mode == 0) @@ -939,7 +936,16 @@ void intel_lvds_init(struct drm_device *dev) */ intel_lvds->edid = drm_get_edid(connector, &dev_priv->gmbus[pin].adapter); - + if (intel_lvds->edid) { + if (drm_add_edid_modes(connector, + intel_lvds->edid)) { + drm_mode_connector_update_edid_property(connector, + intel_lvds->edid); + } else { + kfree(intel_lvds->edid); + intel_lvds->edid = NULL; + } + } if (!intel_lvds->edid) { /* Didn't get an EDID, so * Set wide sync ranges so we get all modes -- cgit v0.10.2 From 6070bf3596f3b5a54091a08d5b2bc90c143dc264 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Mon, 8 Nov 2010 11:20:49 +0900 Subject: kernel: Constify temporary variable in roundup() Fix build error with GCC 3.x caused by commit b28efd54 "kernel: roundup should only reference arguments once" by constifying temporary variable used in that macro. Signed-off-by: Tetsuo Handa Suggested-by: Andrew Morton Acked-by: Eric Paris Signed-off-by: James Morris diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 450092c..b526947 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -60,7 +60,7 @@ extern const char linux_proc_banner[]; #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) #define roundup(x, y) ( \ { \ - typeof(y) __y = y; \ + const typeof(y) __y = y; \ (((x) + (__y - 1)) / __y) * __y; \ } \ ) -- cgit v0.10.2 From 96c99b473a8531188e2f6106c6ef0e33bb4500f2 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 13 Oct 2010 18:16:52 -0700 Subject: Bluetooth: fix hidp kconfig dependency warning Fix kconfig dependency warning to satisfy dependencies: warning: (BT_HIDP && NET && BT && BT_L2CAP && INPUT || USB_HID && HID_SUPPORT && USB && INPUT) selects HID which has unmet direct dependencies (HID_SUPPORT && INPUT) Signed-off-by: Randy Dunlap Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/hidp/Kconfig b/net/bluetooth/hidp/Kconfig index 98fdfa1..86a9154 100644 --- a/net/bluetooth/hidp/Kconfig +++ b/net/bluetooth/hidp/Kconfig @@ -1,6 +1,6 @@ config BT_HIDP tristate "HIDP protocol support" - depends on BT && BT_L2CAP && INPUT + depends on BT && BT_L2CAP && INPUT && HID_SUPPORT select HID help HIDP (Human Interface Device Protocol) is a transport layer -- cgit v0.10.2 From bdb7524a75e4716535a29abb314a82619301e068 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Fri, 15 Oct 2010 10:46:09 +0300 Subject: Bluetooth: Fix non-SSP auth request for HIGH security level sockets When initiating dedicated bonding a L2CAP raw socket with HIGH security level is used. The kernel is supposed to trigger the authentication request in this case but this doesn't happen currently for non-SSP (pre-2.1) devices. The reason is that the authentication request happens in the remote extended features callback which never gets called for non-SSP devices. This patch fixes the issue by requesting also authentiation in the (normal) remote features callback in the case of non-SSP devices. This rule is applied only for HIGH security level which might at first seem unintuitive since on the server socket side MEDIUM is already enough for authentication. However, for the clients we really want to prefer the server side to decide the authentication requrement in most cases, and since most client sockets use MEDIUM it's better to be avoided on the kernel side for these sockets. The important socket to request it for is the dedicated bonding one and that socket uses HIGH security level. The patch is based on the initial investigation and patch proposal from Andrei Emeltchenko . Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index bfef5ba..84093b0 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1175,6 +1175,12 @@ static inline void hci_remote_features_evt(struct hci_dev *hdev, struct sk_buff hci_send_cmd(hdev, HCI_OP_READ_REMOTE_EXT_FEATURES, sizeof(cp), &cp); + } else if (!ev->status && conn->out && + conn->sec_level == BT_SECURITY_HIGH) { + struct hci_cp_auth_requested cp; + cp.handle = ev->handle; + hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED, + sizeof(cp), &cp); } else { conn->state = BT_CONNECTED; hci_proto_connect_cfm(conn, ev->status); -- cgit v0.10.2 From 556ea928f78a390fe16ae584e6433dff304d3014 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 16 Sep 2010 13:58:15 -0400 Subject: Bluetooth: Enable USB autosuspend by default on btusb We've done this for a while in Fedora without any obvious problems other than some interaction with input devices. Those should be fixed now, so let's try this in mainline. Signed-off-by: Matthew Garrett Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index d120a5c..b2f2884 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1029,6 +1029,8 @@ static int btusb_probe(struct usb_interface *intf, usb_set_intfdata(intf, data); + usb_enable_autosuspend(interface_to_usbdev(intf)); + return 0; } -- cgit v0.10.2 From bfaaeb3ed5533a2dd38e3aa9ea43efd619690aed Mon Sep 17 00:00:00 2001 From: steven miao Date: Sat, 16 Oct 2010 18:29:47 -0400 Subject: Bluetooth: fix unaligned access to l2cap conf data In function l2cap_get_conf_opt() and l2cap_add_conf_opt() the address of opt->val sometimes is not at the edge of 2-bytes/4-bytes, so 2-bytes/4 bytes access will cause data misalignment exeception. Use get_unaligned_le16/32 and put_unaligned_le16/32 function to avoid data misalignment execption. Signed-off-by: steven miao Signed-off-by: Mike Frysinger Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index daa7a98..b3fb02a 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -2421,11 +2421,11 @@ static inline int l2cap_get_conf_opt(void **ptr, int *type, int *olen, unsigned break; case 2: - *val = __le16_to_cpu(*((__le16 *) opt->val)); + *val = get_unaligned_le16(opt->val); break; case 4: - *val = __le32_to_cpu(*((__le32 *) opt->val)); + *val = get_unaligned_le32(opt->val); break; default: @@ -2452,11 +2452,11 @@ static void l2cap_add_conf_opt(void **ptr, u8 type, u8 len, unsigned long val) break; case 2: - *((__le16 *) opt->val) = cpu_to_le16(val); + put_unaligned_le16(cpu_to_le16(val), opt->val); break; case 4: - *((__le32 *) opt->val) = cpu_to_le32(val); + put_unaligned_le32(cpu_to_le32(val), opt->val); break; default: -- cgit v0.10.2 From 4f8b691c9fb02e72359e71592098c1de3b8ec712 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Mon, 18 Oct 2010 14:25:53 -0200 Subject: Bluetooth: fix endianness conversion in L2CAP Last commit added a wrong endianness conversion. Fixing that. Reported-by: Harvey Harrison Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index b3fb02a..cd8f6ea 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -2452,11 +2452,11 @@ static void l2cap_add_conf_opt(void **ptr, u8 type, u8 len, unsigned long val) break; case 2: - put_unaligned_le16(cpu_to_le16(val), opt->val); + put_unaligned_le16(val, opt->val); break; case 4: - put_unaligned_le32(cpu_to_le32(val), opt->val); + put_unaligned_le32(val, opt->val); break; default: -- cgit v0.10.2 From 63ce0900d79645c714de6c8b66d8040670068c9e Mon Sep 17 00:00:00 2001 From: Luiz Augusto von Dentz Date: Thu, 19 Aug 2010 14:06:10 +0300 Subject: Bluetooth: fix not setting security level when creating a rfcomm session This cause 'No Bonding' to be used if userspace has not yet been paired with remote device since the l2cap socket used to create the rfcomm session does not have any security level set. Signed-off-by: Luiz Augusto von Dentz Acked-by: Ville Tervo Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 39a5d87..fa642aa 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -79,7 +79,10 @@ static void rfcomm_make_uih(struct sk_buff *skb, u8 addr); static void rfcomm_process_connect(struct rfcomm_session *s); -static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst, int *err); +static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, + bdaddr_t *dst, + u8 sec_level, + int *err); static struct rfcomm_session *rfcomm_session_get(bdaddr_t *src, bdaddr_t *dst); static void rfcomm_session_del(struct rfcomm_session *s); @@ -401,7 +404,7 @@ static int __rfcomm_dlc_open(struct rfcomm_dlc *d, bdaddr_t *src, bdaddr_t *dst, s = rfcomm_session_get(src, dst); if (!s) { - s = rfcomm_session_create(src, dst, &err); + s = rfcomm_session_create(src, dst, d->sec_level, &err); if (!s) return err; } @@ -679,7 +682,10 @@ static void rfcomm_session_close(struct rfcomm_session *s, int err) rfcomm_session_put(s); } -static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst, int *err) +static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, + bdaddr_t *dst, + u8 sec_level, + int *err) { struct rfcomm_session *s = NULL; struct sockaddr_l2 addr; @@ -704,6 +710,7 @@ static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst sk = sock->sk; lock_sock(sk); l2cap_pi(sk)->imtu = l2cap_mtu; + l2cap_pi(sk)->sec_level = sec_level; if (l2cap_ertm) l2cap_pi(sk)->mode = L2CAP_MODE_ERTM; release_sock(sk); -- cgit v0.10.2 From 3e3ede7dda2d77d2cbec608e663b6a6ace501bfc Mon Sep 17 00:00:00 2001 From: "Edgar (gimli) Hucek" Date: Thu, 4 Nov 2010 08:04:33 +0100 Subject: Bluetooth: Add MacBookAir3,1(2) support Adding the new MacBookAir3,1(2) to btusb. Output without the patch and btusb loaded : T: Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=821b Rev= 0.34 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Output with the patch and btusb loaded : T: Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=821b Rev= 0.34 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Edgar (gimli) Hucek Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index b2f2884..ab3894f 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -68,6 +68,9 @@ static struct usb_device_id btusb_table[] = { /* Apple MacBookPro6,2 */ { USB_DEVICE(0x05ac, 0x8218) }, + /* Apple MacBookAir3,1, MacBookAir3,2 */ + { USB_DEVICE(0x05ac, 0x821b) }, + /* AVM BlueFRITZ! USB v2.0 */ { USB_DEVICE(0x057c, 0x3800) }, -- cgit v0.10.2 From 7c6048b7c83690ce59e65922fb2875479a22300e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 28 Oct 2010 15:12:04 +0200 Subject: drm/stub/Kconfig: fix Kconfig for stub driver. * Dave Airlie wrote: > > Lee, Chun-Yi (1): > > gpu: Add Intel GMA500(Poulsbo) Stub Driver Today's -tip fails to build due to upstream commit e26fd11 ("gpu: Add Intel GMA500(Poulsbo) Stub Driver"), committed two days ago and merged yesterday, on x86 allmodconfig with BACKLIGHT_CLASS_DEVICE disabled: drivers/built-in.o: In function `acpi_video_bus_put_one_device': video.c:(.text+0x7d26f): undefined reference to `backlight_device_unregister' drivers/built-in.o: In function `acpi_video_switch_brightness': video.c:(.text+0x7d6f5): undefined reference to `backlight_force_update' drivers/built-in.o: In function `acpi_video_device_find_cap': video.c:(.text+0x7dfdb): undefined reference to `backlight_device_register' drivers/gpu/stub/Kconfig selects ACPI_VIDEO, but ACPI_VIDEO is a complex interactive Kconfig option with a lot of dependencies: config ACPI_VIDEO tristate "Video" depends on X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL depends on INPUT select THERMAL help This driver implements the ACPI Extensions For Display Adapters and if any of its dependencies are not met, we get a build failure. This problem was apparently realized in the driver at a certain stage: config STUB_POULSBO tristate "Intel GMA500 Stub Driver" depends on PCI # Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled # but for select to work, need to select ACPI_VIDEO's dependencies, ick select ACPI_VIDEO if ACPI but not fully understood and not fully fixed. As a quick fix select these secondary dependencies, like drivers/gpu/drm/Kconfig does: config DRM_I915 tristate "i915 driver" depends on AGP_INTEL select SHMEM select DRM_KMS_HELPER select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT # i915 depends on ACPI_VIDEO when ACPI is enabled # but for select to work, need to select ACPI_VIDEO's dependencies, ick select VIDEO_OUTPUT_CONTROL if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPI select ACPI_VIDEO if ACPI select ACPI_BUTTON if ACPI help Choose this option if you have a system that has Intel 830M, 845G, 852GM, 855GM 865G or 915G integrated graphics. If M is selected, the But it's arguably not particularly nice looking, so maybe this area of code is ripe for a Kconfig restructuring/cleanup. Signed-off-by: Ingo Molnar Signed-off-by: Dave Airlie diff --git a/drivers/gpu/stub/Kconfig b/drivers/gpu/stub/Kconfig index 742c423..0e1edd7 100644 --- a/drivers/gpu/stub/Kconfig +++ b/drivers/gpu/stub/Kconfig @@ -3,6 +3,9 @@ config STUB_POULSBO depends on PCI # Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled # but for select to work, need to select ACPI_VIDEO's dependencies, ick + select VIDEO_OUTPUT_CONTROL if ACPI + select BACKLIGHT_CLASS_DEVICE if ACPI + select INPUT if ACPI select ACPI_VIDEO if ACPI help Choose this option if you have a system that has Intel GMA500 -- cgit v0.10.2 From f5d8e0eb7a4308f46faf570fb7da1952c68992c5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 28 Oct 2010 19:00:24 -0400 Subject: drm/radeon/kms/evergreen: add missing pm.vblank_sync update in vbl handler Should fix dynpm problems on evergreen boards Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index f12a5b3..9947fd5 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2295,6 +2295,7 @@ restart_ih: case 0: /* D1 vblank */ if (disp_int & LB_D1_VBLANK_INTERRUPT) { drm_handle_vblank(rdev->ddev, 0); + rdev->pm.vblank_sync = true; wake_up(&rdev->irq.vblank_queue); disp_int &= ~LB_D1_VBLANK_INTERRUPT; DRM_DEBUG("IH: D1 vblank\n"); @@ -2316,6 +2317,7 @@ restart_ih: case 0: /* D2 vblank */ if (disp_int_cont & LB_D2_VBLANK_INTERRUPT) { drm_handle_vblank(rdev->ddev, 1); + rdev->pm.vblank_sync = true; wake_up(&rdev->irq.vblank_queue); disp_int_cont &= ~LB_D2_VBLANK_INTERRUPT; DRM_DEBUG("IH: D2 vblank\n"); @@ -2337,6 +2339,7 @@ restart_ih: case 0: /* D3 vblank */ if (disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) { drm_handle_vblank(rdev->ddev, 2); + rdev->pm.vblank_sync = true; wake_up(&rdev->irq.vblank_queue); disp_int_cont2 &= ~LB_D3_VBLANK_INTERRUPT; DRM_DEBUG("IH: D3 vblank\n"); @@ -2358,6 +2361,7 @@ restart_ih: case 0: /* D4 vblank */ if (disp_int_cont3 & LB_D4_VBLANK_INTERRUPT) { drm_handle_vblank(rdev->ddev, 3); + rdev->pm.vblank_sync = true; wake_up(&rdev->irq.vblank_queue); disp_int_cont3 &= ~LB_D4_VBLANK_INTERRUPT; DRM_DEBUG("IH: D4 vblank\n"); @@ -2379,6 +2383,7 @@ restart_ih: case 0: /* D5 vblank */ if (disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) { drm_handle_vblank(rdev->ddev, 4); + rdev->pm.vblank_sync = true; wake_up(&rdev->irq.vblank_queue); disp_int_cont4 &= ~LB_D5_VBLANK_INTERRUPT; DRM_DEBUG("IH: D5 vblank\n"); @@ -2400,6 +2405,7 @@ restart_ih: case 0: /* D6 vblank */ if (disp_int_cont5 & LB_D6_VBLANK_INTERRUPT) { drm_handle_vblank(rdev->ddev, 5); + rdev->pm.vblank_sync = true; wake_up(&rdev->irq.vblank_queue); disp_int_cont5 &= ~LB_D6_VBLANK_INTERRUPT; DRM_DEBUG("IH: D6 vblank\n"); -- cgit v0.10.2 From 3205bc242b5e3950c808049dbf199fca91f2c844 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 29 Oct 2010 10:46:44 +0200 Subject: drm/ttm: Documentation update Remove an obsolete comment about mm nodes. Document the new bo range manager interface. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index a1cb783..cf47978 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -27,14 +27,6 @@ /* * Authors: Thomas Hellstrom */ -/* Notes: - * - * We store bo pointer in drm_mm_node struct so we know which bo own a - * specific node. There is no protection on the pointer, thus to make - * sure things don't go berserk you have to access this pointer while - * holding the global lru lock and make sure anytime you free a node you - * reset the pointer to NULL. - */ #include "ttm/ttm_module.h" #include "ttm/ttm_bo_driver.h" diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h index d01b4dd..8e0c848 100644 --- a/include/drm/ttm/ttm_bo_driver.h +++ b/include/drm/ttm/ttm_bo_driver.h @@ -206,14 +206,84 @@ struct ttm_tt { struct ttm_mem_type_manager; struct ttm_mem_type_manager_func { + /** + * struct ttm_mem_type_manager member init + * + * @man: Pointer to a memory type manager. + * @p_size: Implementation dependent, but typically the size of the + * range to be managed in pages. + * + * Called to initialize a private range manager. The function is + * expected to initialize the man::priv member. + * Returns 0 on success, negative error code on failure. + */ int (*init)(struct ttm_mem_type_manager *man, unsigned long p_size); + + /** + * struct ttm_mem_type_manager member takedown + * + * @man: Pointer to a memory type manager. + * + * Called to undo the setup done in init. All allocated resources + * should be freed. + */ int (*takedown)(struct ttm_mem_type_manager *man); + + /** + * struct ttm_mem_type_manager member get_node + * + * @man: Pointer to a memory type manager. + * @bo: Pointer to the buffer object we're allocating space for. + * @placement: Placement details. + * @mem: Pointer to a struct ttm_mem_reg to be filled in. + * + * This function should allocate space in the memory type managed + * by @man. Placement details if + * applicable are given by @placement. If successful, + * @mem::mm_node should be set to a non-null value, and + * @mem::start should be set to a value identifying the beginning + * of the range allocated, and the function should return zero. + * If the memory region accomodate the buffer object, @mem::mm_node + * should be set to NULL, and the function should return 0. + * If a system error occured, preventing the request to be fulfilled, + * the function should return a negative error code. + * + * Note that @mem::mm_node will only be dereferenced by + * struct ttm_mem_type_manager functions and optionally by the driver, + * which has knowledge of the underlying type. + * + * This function may not be called from within atomic context, so + * an implementation can and must use either a mutex or a spinlock to + * protect any data structures managing the space. + */ int (*get_node)(struct ttm_mem_type_manager *man, struct ttm_buffer_object *bo, struct ttm_placement *placement, struct ttm_mem_reg *mem); + + /** + * struct ttm_mem_type_manager member put_node + * + * @man: Pointer to a memory type manager. + * @mem: Pointer to a struct ttm_mem_reg to be filled in. + * + * This function frees memory type resources previously allocated + * and that are identified by @mem::mm_node and @mem::start. May not + * be called from within atomic context. + */ void (*put_node)(struct ttm_mem_type_manager *man, struct ttm_mem_reg *mem); + + /** + * struct ttm_mem_type_manager member debug + * + * @man: Pointer to a memory type manager. + * @prefix: Prefix to be used in printout to identify the caller. + * + * This function is called to print out the state of the memory + * type manager to aid debugging of out-of-memory conditions. + * It may not be called from within atomic context. + */ void (*debug)(struct ttm_mem_type_manager *man, const char *prefix); }; @@ -231,14 +301,13 @@ struct ttm_mem_type_manager { uint64_t size; uint32_t available_caching; uint32_t default_caching; + const struct ttm_mem_type_manager_func *func; + void *priv; /* - * Protected by the bdev->lru_lock. - * TODO: Consider one lru_lock per ttm_mem_type_manager. - * Plays ill with list removal, though. + * Protected by the global->lru_lock. */ - const struct ttm_mem_type_manager_func *func; - void *priv; + struct list_head lru; }; -- cgit v0.10.2 From d7a67cb16238abb3109c111761797e0584a6caf9 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 29 Oct 2010 10:46:45 +0200 Subject: drm/ttm: Use private locks for the default bo range manager Searching for a free block in the range manager may in some situations be a lenghty operation, and we want to avoid holding the global lru lock during that time. Instead use a per-manager spinlock. This leaves the global lru lock for quick lru list and swap list manipulation only, including list manipulation associated with reserving buffer objects. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo_manager.c b/drivers/gpu/drm/ttm/ttm_bo_manager.c index 7410c19..038e947 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_manager.c +++ b/drivers/gpu/drm/ttm/ttm_bo_manager.c @@ -1,6 +1,6 @@ /************************************************************************** * - * Copyright (c) 2007-2009 VMware, Inc., Palo Alto, CA., USA + * Copyright (c) 2007-2010 VMware, Inc., Palo Alto, CA., USA * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a @@ -31,20 +31,29 @@ #include "ttm/ttm_module.h" #include "ttm/ttm_bo_driver.h" #include "ttm/ttm_placement.h" -#include +#include "drm_mm.h" #include -#include -#include -#include +#include #include +/** + * Currently we use a spinlock for the lock, but a mutex *may* be + * more appropriate to reduce scheduling latency if the range manager + * ends up with very fragmented allocation patterns. + */ + +struct ttm_range_manager { + struct drm_mm mm; + spinlock_t lock; +}; + static int ttm_bo_man_get_node(struct ttm_mem_type_manager *man, struct ttm_buffer_object *bo, struct ttm_placement *placement, struct ttm_mem_reg *mem) { - struct ttm_bo_global *glob = man->bdev->glob; - struct drm_mm *mm = man->priv; + struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv; + struct drm_mm *mm = &rman->mm; struct drm_mm_node *node = NULL; unsigned long lpfn; int ret; @@ -57,19 +66,19 @@ static int ttm_bo_man_get_node(struct ttm_mem_type_manager *man, if (unlikely(ret)) return ret; - spin_lock(&glob->lru_lock); + spin_lock(&rman->lock); node = drm_mm_search_free_in_range(mm, mem->num_pages, mem->page_alignment, placement->fpfn, lpfn, 1); if (unlikely(node == NULL)) { - spin_unlock(&glob->lru_lock); + spin_unlock(&rman->lock); return 0; } node = drm_mm_get_block_atomic_range(node, mem->num_pages, - mem->page_alignment, - placement->fpfn, - lpfn); - spin_unlock(&glob->lru_lock); + mem->page_alignment, + placement->fpfn, + lpfn); + spin_unlock(&rman->lock); } while (node == NULL); mem->mm_node = node; @@ -80,12 +89,12 @@ static int ttm_bo_man_get_node(struct ttm_mem_type_manager *man, static void ttm_bo_man_put_node(struct ttm_mem_type_manager *man, struct ttm_mem_reg *mem) { - struct ttm_bo_global *glob = man->bdev->glob; + struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv; if (mem->mm_node) { - spin_lock(&glob->lru_lock); + spin_lock(&rman->lock); drm_mm_put_block(mem->mm_node); - spin_unlock(&glob->lru_lock); + spin_unlock(&rman->lock); mem->mm_node = NULL; } } @@ -93,49 +102,49 @@ static void ttm_bo_man_put_node(struct ttm_mem_type_manager *man, static int ttm_bo_man_init(struct ttm_mem_type_manager *man, unsigned long p_size) { - struct drm_mm *mm; + struct ttm_range_manager *rman; int ret; - mm = kzalloc(sizeof(*mm), GFP_KERNEL); - if (!mm) + rman = kzalloc(sizeof(*rman), GFP_KERNEL); + if (!rman) return -ENOMEM; - ret = drm_mm_init(mm, 0, p_size); + ret = drm_mm_init(&rman->mm, 0, p_size); if (ret) { - kfree(mm); + kfree(rman); return ret; } - man->priv = mm; + spin_lock_init(&rman->lock); + man->priv = rman; return 0; } static int ttm_bo_man_takedown(struct ttm_mem_type_manager *man) { - struct ttm_bo_global *glob = man->bdev->glob; - struct drm_mm *mm = man->priv; - int ret = 0; + struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv; + struct drm_mm *mm = &rman->mm; - spin_lock(&glob->lru_lock); + spin_lock(&rman->lock); if (drm_mm_clean(mm)) { drm_mm_takedown(mm); - kfree(mm); + spin_unlock(&rman->lock); + kfree(rman); man->priv = NULL; - } else - ret = -EBUSY; - spin_unlock(&glob->lru_lock); - return ret; + return 0; + } + spin_unlock(&rman->lock); + return -EBUSY; } static void ttm_bo_man_debug(struct ttm_mem_type_manager *man, const char *prefix) { - struct ttm_bo_global *glob = man->bdev->glob; - struct drm_mm *mm = man->priv; + struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv; - spin_lock(&glob->lru_lock); - drm_mm_debug_table(mm, prefix); - spin_unlock(&glob->lru_lock); + spin_lock(&rman->lock); + drm_mm_debug_table(&rman->mm, prefix); + spin_unlock(&rman->lock); } const struct ttm_mem_type_manager_func ttm_bo_manager_func = { -- cgit v0.10.2 From 6e4c55db120b03d411e0eff7cd35f3edabbefe14 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 29 Oct 2010 10:46:46 +0200 Subject: drm/ttm: Remove pointless list_empty check Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index cf47978..e6cedf4 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -814,7 +814,6 @@ static int ttm_bo_mem_force_space(struct ttm_buffer_object *bo, bool no_wait_gpu) { struct ttm_bo_device *bdev = bo->bdev; - struct ttm_bo_global *glob = bdev->glob; struct ttm_mem_type_manager *man = &bdev->man[mem_type]; int ret; @@ -824,12 +823,6 @@ static int ttm_bo_mem_force_space(struct ttm_buffer_object *bo, return ret; if (mem->mm_node) break; - spin_lock(&glob->lru_lock); - if (list_empty(&man->lru)) { - spin_unlock(&glob->lru_lock); - break; - } - spin_unlock(&glob->lru_lock); ret = ttm_mem_evict_first(bdev, mem_type, interruptible, no_wait_reserve, no_wait_gpu); if (unlikely(ret != 0)) -- cgit v0.10.2 From dbc4a5b83585e89a6bce650d32426f61c8d4bca5 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 29 Oct 2010 10:46:47 +0200 Subject: drm/ttm: Remove mm init error printouts and checks Replace with BUG_ON(). These error messages remained from the time when TTM was initialized from user-space. Nowadays hitting one of those is really a kernel bug. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index e6cedf4..f561eea 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -1354,18 +1354,9 @@ int ttm_bo_init_mm(struct ttm_bo_device *bdev, unsigned type, int ret = -EINVAL; struct ttm_mem_type_manager *man; - if (type >= TTM_NUM_MEM_TYPES) { - printk(KERN_ERR TTM_PFX "Illegal memory type %d\n", type); - return ret; - } - + BUG_ON(type >= TTM_NUM_MEM_TYPES); man = &bdev->man[type]; - if (man->has_type) { - printk(KERN_ERR TTM_PFX - "Memory manager already initialized for type %d\n", - type); - return ret; - } + BUG_ON(man->has_type); ret = bdev->driver->init_mem_type(bdev, type, man); if (ret) @@ -1374,13 +1365,6 @@ int ttm_bo_init_mm(struct ttm_bo_device *bdev, unsigned type, ret = 0; if (type != TTM_PL_SYSTEM) { - if (!p_size) { - printk(KERN_ERR TTM_PFX - "Zero size memory manager type %d\n", - type); - return ret; - } - ret = (*man->func->init)(man, p_size); if (ret) return ret; -- cgit v0.10.2 From 06fba6d4168069d818593e2fcc2d4bd0f888e97b Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 29 Oct 2010 10:46:48 +0200 Subject: drm/ttm: Add a barrier when unreserving Since we're doing this outside of a spinlock to provide the necessary barriers, add an explicit barrier. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index f561eea..a32fe41 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -37,6 +37,7 @@ #include #include #include +#include #define TTM_ASSERT_LOCKED(param) #define TTM_DEBUG(fmt, arg...) @@ -444,6 +445,11 @@ static void ttm_bo_cleanup_memtype_use(struct ttm_buffer_object *bo) ttm_bo_mem_put(bo, &bo->mem); atomic_set(&bo->reserved, 0); + + /* + * Make processes trying to reserve really pick it up. + */ + smp_mb__after_atomic_dec(); wake_up_all(&bo->event_queue); } -- cgit v0.10.2 From 7dcebb52f6e0cd5150660a4c37f27cf4c0f1b9b9 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 29 Oct 2010 10:46:49 +0200 Subject: drm/ttm: remove failed ttm binding error printout The driver (for example vmwgfx) may want to silently deal with the error itself. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index a7bab87..af789dc 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -440,10 +440,8 @@ int ttm_tt_bind(struct ttm_tt *ttm, struct ttm_mem_reg *bo_mem) return ret; ret = be->func->bind(be, bo_mem); - if (ret) { - printk(KERN_ERR TTM_PFX "Couldn't bind backend.\n"); + if (unlikely(ret != 0)) return ret; - } ttm->state = tt_bound; -- cgit v0.10.2 From c5d46b4e9f5604ba3e97986ffbd461d3cca79e8b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 29 Oct 2010 13:49:25 -0400 Subject: drm/radeon/kms: make the connector code less verbose Make more of the connector code debug only to avoid spamming the kernel logs with detect and add modes messages. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 4dac4b0..a9d5415 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -183,13 +183,13 @@ radeon_connector_analog_encoder_conflict_solve(struct drm_connector *connector, continue; if (priority == true) { - DRM_INFO("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict)); - DRM_INFO("in favor of %s\n", drm_get_connector_name(connector)); + DRM_DEBUG_KMS("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict)); + DRM_DEBUG_KMS("in favor of %s\n", drm_get_connector_name(connector)); conflict->status = connector_status_disconnected; radeon_connector_update_scratch_regs(conflict, connector_status_disconnected); } else { - DRM_INFO("2: conflicting encoders switching off %s\n", drm_get_connector_name(connector)); - DRM_INFO("in favor of %s\n", drm_get_connector_name(conflict)); + DRM_DEBUG_KMS("2: conflicting encoders switching off %s\n", drm_get_connector_name(connector)); + DRM_DEBUG_KMS("in favor of %s\n", drm_get_connector_name(conflict)); current_status = connector_status_disconnected; } break; @@ -432,13 +432,13 @@ static void radeon_fixup_lvds_native_mode(struct drm_encoder *encoder, mode->vdisplay == native_mode->vdisplay) { *native_mode = *mode; drm_mode_set_crtcinfo(native_mode, CRTC_INTERLACE_HALVE_V); - DRM_INFO("Determined LVDS native mode details from EDID\n"); + DRM_DEBUG_KMS("Determined LVDS native mode details from EDID\n"); break; } } } if (!native_mode->clock) { - DRM_INFO("No LVDS native mode details, disabling RMX\n"); + DRM_DEBUG_KMS("No LVDS native mode details, disabling RMX\n"); radeon_encoder->rmx_type = RMX_OFF; } } -- cgit v0.10.2 From 0ea75e23356f73b4300492e04a62c90787a55c2d Mon Sep 17 00:00:00 2001 From: Sam Tygier Date: Thu, 23 Sep 2010 10:11:01 +0100 Subject: DRM: ignore invalid EDID extensions Currently an invalid EDID extension will cause the whole EDID to be considered invalid. Instead just drop the invalid extensions, and return the valid ones. The base block is modified to claim to have the number valid extensions, and the check sum is updated. For my EIZO S2242W the base block is fine, but the extension block is all zeros. Without this patch I get no X and no VTs. Signed-off-by: Sam Tygier Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index c1a2621..a245d17 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -240,7 +240,7 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf, .addr = DDC_ADDR, .flags = I2C_M_RD, .len = len, - .buf = buf + start, + .buf = buf, } }; @@ -253,7 +253,7 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf, static u8 * drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter) { - int i, j = 0; + int i, j = 0, valid_extensions = 0; u8 *block, *new; if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL) @@ -280,14 +280,28 @@ drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter) for (j = 1; j <= block[0x7e]; j++) { for (i = 0; i < 4; i++) { - if (drm_do_probe_ddc_edid(adapter, block, j, - EDID_LENGTH)) + if (drm_do_probe_ddc_edid(adapter, + block + (valid_extensions + 1) * EDID_LENGTH, + j, EDID_LENGTH)) goto out; - if (drm_edid_block_valid(block + j * EDID_LENGTH)) + if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH)) { + valid_extensions++; break; + } } if (i == 4) - goto carp; + dev_warn(connector->dev->dev, + "%s: Ignoring invalid EDID block %d.\n", + drm_get_connector_name(connector), j); + } + + if (valid_extensions != block[0x7e]) { + block[EDID_LENGTH-1] += block[0x7e] - valid_extensions; + block[0x7e] = valid_extensions; + new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL); + if (!new) + goto out; + block = new; } return block; -- cgit v0.10.2 From 85b54e0c194fe216eb70cbce44365cef42cdc33e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 31 Oct 2010 22:33:53 +0000 Subject: drivers/gpu/drm/vmwgfx: Fix k.alloc switched arguments Signed-off-by: Joe Perches Reviewed-by: Matt Turner Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c index a01c47d..29113c9 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c @@ -557,7 +557,7 @@ int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv) return -EINVAL; } - dev_priv->ldu_priv = kmalloc(GFP_KERNEL, sizeof(*dev_priv->ldu_priv)); + dev_priv->ldu_priv = kmalloc(sizeof(*dev_priv->ldu_priv), GFP_KERNEL); if (!dev_priv->ldu_priv) return -ENOMEM; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c index df2036e..f1a52f9 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c @@ -585,7 +585,7 @@ int vmw_overlay_init(struct vmw_private *dev_priv) return -ENOSYS; } - overlay = kmalloc(GFP_KERNEL, sizeof(*overlay)); + overlay = kmalloc(sizeof(*overlay), GFP_KERNEL); if (!overlay) return -ENOMEM; -- cgit v0.10.2 From fce7d61be01ad7606056608be08fef15b70eeb84 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 30 Oct 2010 21:08:30 +0000 Subject: drivers/gpu/drm: Update WARN uses Coalesce long formats. Align arguments. Add missing newlines. Signed-off-by: Joe Perches Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index dcbeb98..f7af91c 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -276,7 +276,7 @@ static bool drm_encoder_crtc_ok(struct drm_encoder *encoder, struct drm_crtc *tmp; int crtc_mask = 1; - WARN(!crtc, "checking null crtc?"); + WARN(!crtc, "checking null crtc?\n"); dev = crtc->dev; diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index eba9b16..ef188e3 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4065,8 +4065,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment) alignment = i915_gem_get_gtt_alignment(obj); if (obj_priv->gtt_offset & (alignment - 1)) { WARN(obj_priv->pin_count, - "bo is already pinned with incorrect alignment:" - " offset=%x, req.alignment=%x\n", + "bo is already pinned with incorrect alignment: offset=%x, req.alignment=%x\n", obj_priv->gtt_offset, alignment); ret = i915_gem_object_unbind(obj); if (ret) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 9947fd5..488c36c 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2033,7 +2033,7 @@ int evergreen_irq_set(struct radeon_device *rdev) u32 grbm_int_cntl = 0; if (!rdev->irq.installed) { - WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n"); + WARN(1, "Can't enable IRQ/MSI because no handler is installed\n"); return -EINVAL; } /* don't enable anything if the ih is disabled */ diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 0e8f28a..8e10aa9 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -442,7 +442,7 @@ int r100_pci_gart_init(struct radeon_device *rdev) int r; if (rdev->gart.table.ram.ptr) { - WARN(1, "R100 PCI GART already initialized.\n"); + WARN(1, "R100 PCI GART already initialized\n"); return 0; } /* Initialize common gart structure */ @@ -516,7 +516,7 @@ int r100_irq_set(struct radeon_device *rdev) uint32_t tmp = 0; if (!rdev->irq.installed) { - WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n"); + WARN(1, "Can't enable IRQ/MSI because no handler is installed\n"); WREG32(R_000040_GEN_INT_CNTL, 0); return -EINVAL; } diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 34527e6..cde1d34 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -91,7 +91,7 @@ int rv370_pcie_gart_init(struct radeon_device *rdev) int r; if (rdev->gart.table.vram.robj) { - WARN(1, "RV370 PCIE GART already initialized.\n"); + WARN(1, "RV370 PCIE GART already initialized\n"); return 0; } /* Initialize common gart structure */ diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 33952a1..403e0df 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -919,7 +919,7 @@ int r600_pcie_gart_init(struct radeon_device *rdev) int r; if (rdev->gart.table.vram.robj) { - WARN(1, "R600 PCIE GART already initialized.\n"); + WARN(1, "R600 PCIE GART already initialized\n"); return 0; } /* Initialize common gart structure */ @@ -2995,7 +2995,7 @@ int r600_irq_set(struct radeon_device *rdev) u32 hdmi1, hdmi2; if (!rdev->irq.installed) { - WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n"); + WARN(1, "Can't enable IRQ/MSI because no handler is installed\n"); return -EINVAL; } /* don't enable anything if the ih is disabled */ diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index 216392d..daacb28 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -240,7 +240,8 @@ retry: */ if (seq == rdev->fence_drv.last_seq && radeon_gpu_is_lockup(rdev)) { /* good news we believe it's a lockup */ - WARN(1, "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n", fence->seq, seq); + WARN(1, "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n", + fence->seq, seq); /* FIXME: what should we do ? marking everyone * as signaled for now */ diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index fe95bb3..01c2c73 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -689,7 +689,8 @@ static int radeon_ttm_backend_bind(struct ttm_backend *backend, gtt = container_of(backend, struct radeon_ttm_backend, backend); gtt->offset = bo_mem->start << PAGE_SHIFT; if (!gtt->num_pages) { - WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n", gtt->num_pages, bo_mem, backend); + WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n", + gtt->num_pages, bo_mem, backend); } r = radeon_gart_bind(gtt->rdev, gtt->offset, gtt->num_pages, gtt->pages); diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index f683e51..5512e4e 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -78,7 +78,7 @@ int rs400_gart_init(struct radeon_device *rdev) int r; if (rdev->gart.table.ram.ptr) { - WARN(1, "RS400 GART already initialized.\n"); + WARN(1, "RS400 GART already initialized\n"); return 0; } /* Check gart size */ diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index b091a1f..f1c6e02 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -375,7 +375,7 @@ int rs600_gart_init(struct radeon_device *rdev) int r; if (rdev->gart.table.vram.robj) { - WARN(1, "RS600 GART already initialized.\n"); + WARN(1, "RS600 GART already initialized\n"); return 0; } /* Initialize common gart structure */ @@ -505,7 +505,7 @@ int rs600_irq_set(struct radeon_device *rdev) ~S_007D18_DC_HOT_PLUG_DETECT2_INT_EN(1); if (!rdev->irq.installed) { - WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n"); + WARN(1, "Can't enable IRQ/MSI because no handler is installed\n"); WREG32(R_000040_GEN_INT_CNTL, 0); return -EINVAL; } -- cgit v0.10.2 From a0ae5864d42b41c411368bd689462bf063c029c8 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 2 Nov 2010 05:26:48 +0000 Subject: drm/radeon/kms: don't disable shared encoders on pre-DCE3 display blocks The A/B links aren't independantly useable on these blocks so when we disable the encoders, make sure to only disable the encoder when there is no connector using it. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=18564 Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index ae58b68..b862be6 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -1547,6 +1547,23 @@ static void radeon_atom_encoder_disable(struct drm_encoder *encoder) struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_atom_dig *dig; + + /* check for pre-DCE3 cards with shared encoders; + * can't really use the links individually, so don't disable + * the encoder if it's in use by another connector + */ + if (!ASIC_IS_DCE3(rdev)) { + struct drm_encoder *other_encoder; + struct radeon_encoder *other_radeon_encoder; + + list_for_each_entry(other_encoder, &dev->mode_config.encoder_list, head) { + other_radeon_encoder = to_radeon_encoder(other_encoder); + if ((radeon_encoder->encoder_id == other_radeon_encoder->encoder_id) && + drm_helper_encoder_in_use(other_encoder)) + goto disable_done; + } + } + radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); switch (radeon_encoder->encoder_id) { @@ -1586,6 +1603,7 @@ static void radeon_atom_encoder_disable(struct drm_encoder *encoder) break; } +disable_done: if (radeon_encoder_is_digital(encoder)) { if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) r600_hdmi_disable(encoder); -- cgit v0.10.2 From aa123268c2623c62e33248dafc0572f091689e86 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Tue, 2 Nov 2010 13:21:47 +0000 Subject: drm/ttm: Make sure a sync object doesn't disappear while we use it The sync object may disappear as soon as we release the bo::lock, so take a reference on it while we use it. One option would be to call sync_object_flush() before releasing the bo::lock, but that would put an atomic requirement on that function. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index a32fe41..340dfb1 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -458,7 +458,7 @@ static void ttm_bo_cleanup_refs_or_queue(struct ttm_buffer_object *bo) struct ttm_bo_device *bdev = bo->bdev; struct ttm_bo_global *glob = bo->glob; struct ttm_bo_driver *driver; - void *sync_obj; + void *sync_obj = NULL; void *sync_obj_arg; int put_count; int ret; @@ -493,17 +493,20 @@ static void ttm_bo_cleanup_refs_or_queue(struct ttm_buffer_object *bo) spin_lock(&glob->lru_lock); } queue: - sync_obj = bo->sync_obj; - sync_obj_arg = bo->sync_obj_arg; driver = bdev->driver; + if (bo->sync_obj) + sync_obj = driver->sync_obj_ref(bo->sync_obj); + sync_obj_arg = bo->sync_obj_arg; kref_get(&bo->list_kref); list_add_tail(&bo->ddestroy, &bdev->ddestroy); spin_unlock(&glob->lru_lock); spin_unlock(&bo->lock); - if (sync_obj) + if (sync_obj) { driver->sync_obj_flush(sync_obj, sync_obj_arg); + driver->sync_obj_unref(&sync_obj); + } schedule_delayed_work(&bdev->wq, ((HZ / 100) < 1) ? 1 : HZ / 100); } -- cgit v0.10.2 From 29e190e049168b01dc5fa26d577ef99cafd753ee Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Tue, 2 Nov 2010 13:21:48 +0000 Subject: drm/ttm: Remove the CAP_SYS_ADMIN requirement for bo pinning This breaks vmwgfx non-root EGL clients and is a remnant from the TTM user-space interface. This test should be done in the driver. Replace the remaining placement test with a BUG_ON, since triggering it is a driver bug. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 340dfb1..ce46457 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -1119,35 +1119,9 @@ EXPORT_SYMBOL(ttm_bo_validate); int ttm_bo_check_placement(struct ttm_buffer_object *bo, struct ttm_placement *placement) { - int i; + BUG_ON((placement->fpfn || placement->lpfn) && + (bo->mem.num_pages > (placement->lpfn - placement->fpfn))); - if (placement->fpfn || placement->lpfn) { - if (bo->mem.num_pages > (placement->lpfn - placement->fpfn)) { - printk(KERN_ERR TTM_PFX "Page number range to small " - "Need %lu pages, range is [%u, %u]\n", - bo->mem.num_pages, placement->fpfn, - placement->lpfn); - return -EINVAL; - } - } - for (i = 0; i < placement->num_placement; i++) { - if (!capable(CAP_SYS_ADMIN)) { - if (placement->placement[i] & TTM_PL_FLAG_NO_EVICT) { - printk(KERN_ERR TTM_PFX "Need to be root to " - "modify NO_EVICT status.\n"); - return -EINVAL; - } - } - } - for (i = 0; i < placement->num_busy_placement; i++) { - if (!capable(CAP_SYS_ADMIN)) { - if (placement->busy_placement[i] & TTM_PL_FLAG_NO_EVICT) { - printk(KERN_ERR TTM_PFX "Need to be root to " - "modify NO_EVICT status.\n"); - return -EINVAL; - } - } - } return 0; } -- cgit v0.10.2 From 1ef0724dbd9c9e6f421a8987f58b8e034da43ec2 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Tue, 2 Nov 2010 13:21:49 +0000 Subject: drm/vmwgfx: Fix oops on failing bo pin When bo pin failed during modesetting, vmwgfx would try to unref a non-existing buffer object. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 87c6e61..cceeb42 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -720,6 +720,8 @@ static int vmw_surface_dmabuf_pin(struct vmw_framebuffer *vfb) &vmw_vram_ne_placement, false, &vmw_dmabuf_bo_free); vmw_overlay_resume_all(dev_priv); + if (unlikely(ret != 0)) + vfbs->buffer = NULL; return ret; } @@ -730,6 +732,9 @@ static int vmw_surface_dmabuf_unpin(struct vmw_framebuffer *vfb) struct vmw_framebuffer_surface *vfbs = vmw_framebuffer_to_vfbs(&vfb->base); + if (unlikely(vfbs->buffer == NULL)) + return 0; + bo = &vfbs->buffer->base; ttm_bo_unref(&bo); vfbs->buffer = NULL; -- cgit v0.10.2 From ec3789ccccc4ded3b136ea93dec94b764b014525 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 5 Nov 2010 03:07:34 +0000 Subject: drivers/gpu: Use vzalloc Signed-off-by: Joe Perches Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/via/via_dmablit.c b/drivers/gpu/drm/via/via_dmablit.c index 9b5b4d9..3e038a3 100644 --- a/drivers/gpu/drm/via/via_dmablit.c +++ b/drivers/gpu/drm/via/via_dmablit.c @@ -235,9 +235,9 @@ via_lock_all_dma_pages(drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) - first_pfn + 1; - if (NULL == (vsg->pages = vmalloc(sizeof(struct page *) * vsg->num_pages))) + vsg->pages = vzalloc(sizeof(struct page *) * vsg->num_pages); + if (NULL == vsg->pages) return -ENOMEM; - memset(vsg->pages, 0, sizeof(struct page *) * vsg->num_pages); down_read(¤t->mm->mmap_sem); ret = get_user_pages(current, current->mm, (unsigned long)xfer->mem_addr, -- cgit v0.10.2 From dccb2a952b1f0b51978fcb3f9899c7f46ffd4b28 Mon Sep 17 00:00:00 2001 From: Kulikov Vasiliy Date: Sat, 6 Nov 2010 14:41:16 +0000 Subject: drm: vmwgfx: fix information leak to userland Structure drm_vmw_fence_rep is copied to userland with field "pad64" uninitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index 51d9f9f..76954e3 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -691,6 +691,7 @@ int vmw_execbuf_ioctl(struct drm_device *dev, void *data, fence_rep.error = ret; fence_rep.fence_seq = (uint64_t) sequence; + fence_rep.pad64 = 0; user_fence_rep = (struct drm_vmw_fence_rep __user *) (unsigned long)arg->fence_rep; -- cgit v0.10.2 From fb939dfcf2a3a70357000617799925b6a11f9348 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 8 Nov 2010 16:08:29 +0000 Subject: drm/radeon/kms: add support for clock/data path routers This is a follow on to: 26b5bc986423cf3887e09188cb662ed651c5374d (drm/radeon/kms: add support for router objects) That patch added support for systems that use a mux to control the ddc line routing between the connectors. This patch adds support for systems that use a mux to control the encoder clock and data path routing to the connectors. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=31339 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 04cac7e..a1de975 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -526,7 +526,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) if (crev < 2) return false; - router.valid = false; + router.ddc_valid = false; + router.cd_valid = false; obj_header = (ATOM_OBJECT_HEADER *) (ctx->bios + data_offset); path_obj = (ATOM_DISPLAY_OBJECT_PATH_TABLE *) @@ -647,7 +648,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) usDeviceTag)); } else if (grph_obj_type == GRAPH_OBJECT_TYPE_ROUTER) { - router.valid = false; + router.ddc_valid = false; + router.cd_valid = false; for (k = 0; k < router_obj->ucNumberOfObjects; k++) { u16 router_obj_id = le16_to_cpu(router_obj->asObjects[j].usObjectID); if (le16_to_cpu(path->usGraphicObjIds[j]) == router_obj_id) { @@ -657,6 +659,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) ATOM_I2C_RECORD *i2c_record; ATOM_I2C_ID_CONFIG_ACCESS *i2c_config; ATOM_ROUTER_DDC_PATH_SELECT_RECORD *ddc_path; + ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD *cd_path; ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *router_src_dst_table = (ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *) (ctx->bios + data_offset + @@ -690,10 +693,18 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) case ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE: ddc_path = (ATOM_ROUTER_DDC_PATH_SELECT_RECORD *) record; - router.valid = true; - router.mux_type = ddc_path->ucMuxType; - router.mux_control_pin = ddc_path->ucMuxControlPin; - router.mux_state = ddc_path->ucMuxState[enum_id]; + router.ddc_valid = true; + router.ddc_mux_type = ddc_path->ucMuxType; + router.ddc_mux_control_pin = ddc_path->ucMuxControlPin; + router.ddc_mux_state = ddc_path->ucMuxState[enum_id]; + break; + case ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE: + cd_path = (ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD *) + record; + router.cd_valid = true; + router.cd_mux_type = cd_path->ucMuxType; + router.cd_mux_control_pin = cd_path->ucMuxControlPin; + router.cd_mux_state = cd_path->ucMuxState[enum_id]; break; } record = (ATOM_COMMON_RECORD_HEADER *) @@ -860,7 +871,8 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct size_t bc_size = sizeof(*bios_connectors) * ATOM_MAX_SUPPORTED_DEVICE; struct radeon_router router; - router.valid = false; + router.ddc_valid = false; + router.cd_valid = false; bios_connectors = kzalloc(bc_size, GFP_KERNEL); if (!bios_connectors) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index a9d5415..fe6c747 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1116,7 +1116,7 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->shared_ddc = true; shared_ddc = true; } - if (radeon_connector->router_bus && router->valid && + if (radeon_connector->router_bus && router->ddc_valid && (radeon_connector->router.router_id == router->router_id)) { radeon_connector->shared_ddc = false; shared_ddc = false; @@ -1136,7 +1136,7 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->connector_object_id = connector_object_id; radeon_connector->hpd = *hpd; radeon_connector->router = *router; - if (router->valid) { + if (router->ddc_valid || router->cd_valid) { radeon_connector->router_bus = radeon_i2c_lookup(rdev, &router->i2c_info); if (!radeon_connector->router_bus) goto failed; diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 0383631..1df4dc6 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -315,10 +315,14 @@ static void radeon_print_display_setup(struct drm_device *dev) radeon_connector->ddc_bus->rec.en_data_reg, radeon_connector->ddc_bus->rec.y_clk_reg, radeon_connector->ddc_bus->rec.y_data_reg); - if (radeon_connector->router_bus) + if (radeon_connector->router.ddc_valid) DRM_INFO(" DDC Router 0x%x/0x%x\n", - radeon_connector->router.mux_control_pin, - radeon_connector->router.mux_state); + radeon_connector->router.ddc_mux_control_pin, + radeon_connector->router.ddc_mux_state); + if (radeon_connector->router.cd_valid) + DRM_INFO(" Clock/Data Router 0x%x/0x%x\n", + radeon_connector->router.cd_mux_control_pin, + radeon_connector->router.cd_mux_state); } else { if (connector->connector_type == DRM_MODE_CONNECTOR_VGA || connector->connector_type == DRM_MODE_CONNECTOR_DVII || @@ -398,8 +402,8 @@ int radeon_ddc_get_modes(struct radeon_connector *radeon_connector) int ret = 0; /* on hw with routers, select right port */ - if (radeon_connector->router.valid) - radeon_router_select_port(radeon_connector); + if (radeon_connector->router.ddc_valid) + radeon_router_select_ddc_port(radeon_connector); if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) || (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) { @@ -432,8 +436,8 @@ static int radeon_ddc_dump(struct drm_connector *connector) int ret = 0; /* on hw with routers, select right port */ - if (radeon_connector->router.valid) - radeon_router_select_port(radeon_connector); + if (radeon_connector->router.ddc_valid) + radeon_router_select_ddc_port(radeon_connector); if (!radeon_connector->ddc_bus) return -1; diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index b862be6..f678257 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -1520,6 +1520,7 @@ radeon_atom_dac_detect(struct drm_encoder *encoder, struct drm_connector *connec static void radeon_atom_encoder_prepare(struct drm_encoder *encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); if (radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) { @@ -1531,6 +1532,13 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder) radeon_atom_output_lock(encoder, true); radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); + /* select the clock/data port if it uses a router */ + if (connector) { + struct radeon_connector *radeon_connector = to_radeon_connector(connector); + if (radeon_connector->router.cd_valid) + radeon_router_select_cd_port(radeon_connector); + } + /* this is needed for the pll/ss setup to work correctly in some cases */ atombios_set_encoder_crtc_source(encoder); } diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c index 6a13ee3..24b8a8b 100644 --- a/drivers/gpu/drm/radeon/radeon_i2c.c +++ b/drivers/gpu/drm/radeon/radeon_i2c.c @@ -53,8 +53,8 @@ bool radeon_ddc_probe(struct radeon_connector *radeon_connector) }; /* on hw with routers, select right port */ - if (radeon_connector->router.valid) - radeon_router_select_port(radeon_connector); + if (radeon_connector->router.ddc_valid) + radeon_router_select_ddc_port(radeon_connector); ret = i2c_transfer(&radeon_connector->ddc_bus->adapter, msgs, 2); if (ret == 2) @@ -1084,26 +1084,51 @@ void radeon_i2c_put_byte(struct radeon_i2c_chan *i2c_bus, addr, val); } -/* router switching */ -void radeon_router_select_port(struct radeon_connector *radeon_connector) +/* ddc router switching */ +void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector) { u8 val; - if (!radeon_connector->router.valid) + if (!radeon_connector->router.ddc_valid) return; radeon_i2c_get_byte(radeon_connector->router_bus, radeon_connector->router.i2c_addr, 0x3, &val); - val &= radeon_connector->router.mux_control_pin; + val &= radeon_connector->router.ddc_mux_control_pin; radeon_i2c_put_byte(radeon_connector->router_bus, radeon_connector->router.i2c_addr, 0x3, val); radeon_i2c_get_byte(radeon_connector->router_bus, radeon_connector->router.i2c_addr, 0x1, &val); - val &= radeon_connector->router.mux_control_pin; - val |= radeon_connector->router.mux_state; + val &= radeon_connector->router.ddc_mux_control_pin; + val |= radeon_connector->router.ddc_mux_state; + radeon_i2c_put_byte(radeon_connector->router_bus, + radeon_connector->router.i2c_addr, + 0x1, val); +} + +/* clock/data router switching */ +void radeon_router_select_cd_port(struct radeon_connector *radeon_connector) +{ + u8 val; + + if (!radeon_connector->router.cd_valid) + return; + + radeon_i2c_get_byte(radeon_connector->router_bus, + radeon_connector->router.i2c_addr, + 0x3, &val); + val &= radeon_connector->router.cd_mux_control_pin; + radeon_i2c_put_byte(radeon_connector->router_bus, + radeon_connector->router.i2c_addr, + 0x3, val); + radeon_i2c_get_byte(radeon_connector->router_bus, + radeon_connector->router.i2c_addr, + 0x1, &val); + val &= radeon_connector->router.cd_mux_control_pin; + val |= radeon_connector->router.cd_mux_state; radeon_i2c_put_byte(radeon_connector->router_bus, radeon_connector->router.i2c_addr, 0x1, val); diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 9245716..680f576 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -401,13 +401,19 @@ struct radeon_hpd { }; struct radeon_router { - bool valid; u32 router_id; struct radeon_i2c_bus_rec i2c_info; u8 i2c_addr; - u8 mux_type; - u8 mux_control_pin; - u8 mux_state; + /* i2c mux */ + bool ddc_valid; + u8 ddc_mux_type; + u8 ddc_mux_control_pin; + u8 ddc_mux_state; + /* clock/data mux */ + bool cd_valid; + u8 cd_mux_type; + u8 cd_mux_control_pin; + u8 cd_mux_state; }; struct radeon_connector { @@ -488,7 +494,8 @@ extern void radeon_i2c_put_byte(struct radeon_i2c_chan *i2c, u8 slave_addr, u8 addr, u8 val); -extern void radeon_router_select_port(struct radeon_connector *radeon_connector); +extern void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector); +extern void radeon_router_select_cd_port(struct radeon_connector *radeon_connector); extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector); extern int radeon_ddc_get_modes(struct radeon_connector *radeon_connector); -- cgit v0.10.2 From bdd91b2b571c80dacfca88667d935f9907e62931 Mon Sep 17 00:00:00 2001 From: Tyson Whitehead Date: Mon, 8 Nov 2010 16:08:30 +0000 Subject: drm/radeon/kms: fix bugs in ddc and cd path router code This is a follow on to: 2b5b1d7da9583484b3a9e7e375a90ca0e8ca07c2 (drm/radeon/kms: add support for clock/data path routers) That patch completed mux support for ddc and cd line routing between connectors. This patch fixes an indexing typo that was resulting in the atom bios router objects not always being walked, ensures the validity entries for the reused router structure are reset for every connector object walked, and corrects the masking operations used to update the mux control bits. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=31339 Signed-off-by: Tyson Whitehead Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index a1de975..87ead09 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -526,9 +526,6 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) if (crev < 2) return false; - router.ddc_valid = false; - router.cd_valid = false; - obj_header = (ATOM_OBJECT_HEADER *) (ctx->bios + data_offset); path_obj = (ATOM_DISPLAY_OBJECT_PATH_TABLE *) (ctx->bios + data_offset + @@ -625,6 +622,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) if (connector_type == DRM_MODE_CONNECTOR_Unknown) continue; + router.ddc_valid = false; + router.cd_valid = false; for (j = 0; j < ((le16_to_cpu(path->usSize) - 8) / 2); j++) { uint8_t grph_obj_id, grph_obj_num, grph_obj_type; @@ -648,10 +647,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) usDeviceTag)); } else if (grph_obj_type == GRAPH_OBJECT_TYPE_ROUTER) { - router.ddc_valid = false; - router.cd_valid = false; for (k = 0; k < router_obj->ucNumberOfObjects; k++) { - u16 router_obj_id = le16_to_cpu(router_obj->asObjects[j].usObjectID); + u16 router_obj_id = le16_to_cpu(router_obj->asObjects[k].usObjectID); if (le16_to_cpu(path->usGraphicObjIds[j]) == router_obj_id) { ATOM_COMMON_RECORD_HEADER *record = (ATOM_COMMON_RECORD_HEADER *) (ctx->bios + data_offset + diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c index 24b8a8b..0cfbba0 100644 --- a/drivers/gpu/drm/radeon/radeon_i2c.c +++ b/drivers/gpu/drm/radeon/radeon_i2c.c @@ -1095,14 +1095,14 @@ void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector) radeon_i2c_get_byte(radeon_connector->router_bus, radeon_connector->router.i2c_addr, 0x3, &val); - val &= radeon_connector->router.ddc_mux_control_pin; + val &= ~radeon_connector->router.ddc_mux_control_pin; radeon_i2c_put_byte(radeon_connector->router_bus, radeon_connector->router.i2c_addr, 0x3, val); radeon_i2c_get_byte(radeon_connector->router_bus, radeon_connector->router.i2c_addr, 0x1, &val); - val &= radeon_connector->router.ddc_mux_control_pin; + val &= ~radeon_connector->router.ddc_mux_control_pin; val |= radeon_connector->router.ddc_mux_state; radeon_i2c_put_byte(radeon_connector->router_bus, radeon_connector->router.i2c_addr, @@ -1120,14 +1120,14 @@ void radeon_router_select_cd_port(struct radeon_connector *radeon_connector) radeon_i2c_get_byte(radeon_connector->router_bus, radeon_connector->router.i2c_addr, 0x3, &val); - val &= radeon_connector->router.cd_mux_control_pin; + val &= ~radeon_connector->router.cd_mux_control_pin; radeon_i2c_put_byte(radeon_connector->router_bus, radeon_connector->router.i2c_addr, 0x3, val); radeon_i2c_get_byte(radeon_connector->router_bus, radeon_connector->router.i2c_addr, 0x1, &val); - val &= radeon_connector->router.cd_mux_control_pin; + val &= ~radeon_connector->router.cd_mux_control_pin; val |= radeon_connector->router.cd_mux_state; radeon_i2c_put_byte(radeon_connector->router_bus, radeon_connector->router.i2c_addr, -- cgit v0.10.2 From b2298fd27127f872881048fd37cb9217a648ae06 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 8 Nov 2010 18:39:18 +0000 Subject: drm/radeon/kms: fix thermal sensor reporting on rv6xx Temperature is not shifted as on newer asics. Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 403e0df..0f806cc 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -97,14 +97,8 @@ u32 rv6xx_get_temp(struct radeon_device *rdev) { u32 temp = (RREG32(CG_THERMAL_STATUS) & ASIC_T_MASK) >> ASIC_T_SHIFT; - u32 actual_temp = 0; - if ((temp >> 7) & 1) - actual_temp = 0; - else - actual_temp = (temp >> 1) & 0xff; - - return actual_temp * 1000; + return temp * 1000; } void r600_pm_get_dynpm_state(struct radeon_device *rdev) -- cgit v0.10.2 From 99870bd784ff9eb2405eab060125c0ded74968cd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 8 Nov 2010 17:02:26 +0900 Subject: sh: intc: Fix up initializers for gcc 4.5. The _INTC_ARRAY() initializer presently does a NULL test which blows up as a non-constant initializer under gcc 4.5. This switches over to a type test to account for NULL initializers explicitly. Signed-off-by: Paul Mundt diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h index f656d1a..5812fef 100644 --- a/include/linux/sh_intc.h +++ b/include/linux/sh_intc.h @@ -79,7 +79,7 @@ struct intc_hw_desc { unsigned int nr_subgroups; }; -#define _INTC_ARRAY(a) a, a == NULL ? 0 : sizeof(a)/sizeof(*a) +#define _INTC_ARRAY(a) a, __same_type(a, NULL) ? 0 : sizeof(a)/sizeof(*a) #define INTC_HW_DESC(vectors, groups, mask_regs, \ prio_regs, sense_regs, ack_regs) \ -- cgit v0.10.2 From 6e16edfe62eb49274c8a74dc04d1c6f315f8f82b Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Mon, 8 Nov 2010 00:20:30 -0600 Subject: usb: musb: fail unaligned DMA transfers on v1.8 and above The Inventra DMA engine in version 1.8 and later of the MUSB controller cannot handle DMA addresses that are not aligned to a 4 byte boundary. It ends up ignoring the last two bits programmed in the DMA_ADDR register. This is a deliberate design change in the controller and is documented in the programming guide. Earlier versions of the controller could handle these accesses just fine. Fail dma_channel_program if we see an unaligned address when using the newer controllers, so that the caller can carry out the transfer using PIO mode. (Current callers already have this backup path in place). Signed-off-by: Anand Gadiyar Tested-by: Ming Lei Cc: Ajay Kumar Gupta Cc: Mike Frysinger Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 6f771af..563114d 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -158,6 +158,8 @@ static int dma_channel_program(struct dma_channel *channel, dma_addr_t dma_addr, u32 len) { struct musb_dma_channel *musb_channel = channel->private_data; + struct musb_dma_controller *controller = musb_channel->controller; + struct musb *musb = controller->private_data; DBG(2, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n", musb_channel->epnum, @@ -167,6 +169,18 @@ static int dma_channel_program(struct dma_channel *channel, BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN || channel->status == MUSB_DMA_STATUS_BUSY); + /* + * The DMA engine in RTL1.8 and above cannot handle + * DMA addresses that are not aligned to a 4 byte boundary. + * It ends up masking the last two bits of the address + * programmed in DMA_ADDR. + * + * Fail such DMA transfers, so that the backup PIO mode + * can carry out the transfer + */ + if ((musb->hwvers >= MUSB_HWVERS_1800) && (dma_addr % 4)) + return false; + channel->actual_len = 0; musb_channel->start_addr = dma_addr; musb_channel->len = len; -- cgit v0.10.2 From 35bbe587d0959712b69540077c9e0fd27d3e6baf Mon Sep 17 00:00:00 2001 From: Dmitri Belimov Date: Tue, 26 Oct 2010 00:31:40 -0300 Subject: [media] saa7134: Fix autodetect for Behold A7 and H7 TV cards The entries for those cards are after the generic entries, so they don't work, in practice. Moving them to happen before the generic entres fix the issue. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 10a6cbf..0911cb5 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -6661,6 +6661,18 @@ struct pci_device_id saa7134_pci_tbl[] = { .subdevice = 0x2804, .driver_data = SAA7134_BOARD_TECHNOTREND_BUDGET_T3000, }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, /* Beholder Intl. Ltd. */ + .subdevice = 0x7190, + .driver_data = SAA7134_BOARD_BEHOLD_H7, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, /* Beholder Intl. Ltd. */ + .subdevice = 0x7090, + .driver_data = SAA7134_BOARD_BEHOLD_A7, + }, { /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, @@ -6698,18 +6710,6 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .driver_data = SAA7134_BOARD_UNKNOWN, - }, { - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7133, - .subvendor = 0x5ace, /* Beholder Intl. Ltd. */ - .subdevice = 0x7190, - .driver_data = SAA7134_BOARD_BEHOLD_H7, - }, { - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7133, - .subvendor = 0x5ace, /* Beholder Intl. Ltd. */ - .subdevice = 0x7090, - .driver_data = SAA7134_BOARD_BEHOLD_A7, },{ /* --- end of list --- */ } -- cgit v0.10.2 From 3565bd46b1c6a3dbf1f670d3275aa4018a4c65ae Mon Sep 17 00:00:00 2001 From: Suresh Jayaraman Date: Tue, 9 Nov 2010 12:27:41 +0530 Subject: cifs: fix a memleak in cifs_setattr_nounix() Andrew Hendry reported a kmemleak warning in 2.6.37-rc1 while editing a text file with gedit over cifs. unreferenced object 0xffff88022ee08b40 (size 32): comm "gedit", pid 2524, jiffies 4300160388 (age 2633.655s) hex dump (first 32 bytes): 5c 2e 67 6f 75 74 70 75 74 73 74 72 65 61 6d 2d \.goutputstream- 35 42 41 53 4c 56 00 de 09 00 00 00 2c 26 78 ee 5BASLV......,&x. backtrace: [] kmemleak_alloc+0x2d/0x60 [] __kmalloc+0xe3/0x1d0 [] build_path_from_dentry+0xf0/0x230 [cifs] [] cifs_setattr+0x9e/0x770 [cifs] [] notify_change+0x170/0x2e0 [] sys_fchmod+0x10b/0x140 [] system_call_fastpath+0x16/0x1b [] 0xffffffffffffffff The commit 1025774c that removed inode_setattr() seems to have introduced this memleak by returning early without freeing 'full_path'. Reported-by: Andrew Hendry Cc: Christoph Hellwig Reviewed-by: Jeff Layton Signed-off-by: Suresh Jayaraman Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 39869c3..ef3a55b 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -2177,7 +2177,6 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs) setattr_copy(inode, attrs); mark_inode_dirty(inode); - return 0; cifs_setattr_exit: kfree(full_path); -- cgit v0.10.2 From 399d84655648b052c03301a71caa33758d906c2e Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 27 Oct 2010 10:45:32 -0300 Subject: [media] cafe_ccic: fix subdev configuration For some reason, commit 1aafeb30104a is missing one change that was included in the email submission. The sensor configuration must be passed down to the ov7670 subdev. Signed-off-by: Daniel Drake Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 2934770..7bc3667 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -2065,8 +2065,9 @@ static int cafe_pci_probe(struct pci_dev *pdev, sensor_cfg.clock_speed = 45; cam->sensor_addr = 0x42; - cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, &cam->i2c_adapter, - NULL, "ov7670", cam->sensor_addr, NULL); + cam->sensor = v4l2_i2c_new_subdev_cfg(&cam->v4l2_dev, &cam->i2c_adapter, + "ov7670", "ov7670", 0, &sensor_cfg, cam->sensor_addr, + NULL); if (cam->sensor == NULL) { ret = -ENODEV; goto out_smbus; -- cgit v0.10.2 From 18943d292facbc70e6a36fc62399ae833f64671b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 8 Nov 2010 11:15:54 +0000 Subject: inet: fix ip_mc_drop_socket() commit 8723e1b4ad9be4444 (inet: RCU changes in inetdev_by_index()) forgot one call site in ip_mc_drop_socket() We should not decrease idev refcount after inetdev_by_index() call, since refcount is not increased anymore. Reported-by: Markus Trippelsdorf Reported-by: Miles Lane Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index c8877c6..3c53c2d 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -2306,10 +2306,8 @@ void ip_mc_drop_socket(struct sock *sk) in_dev = inetdev_by_index(net, iml->multi.imr_ifindex); (void) ip_mc_leave_src(sk, iml, in_dev); - if (in_dev != NULL) { + if (in_dev != NULL) ip_mc_dec_group(in_dev, iml->multi.imr_multiaddr.s_addr); - in_dev_put(in_dev); - } /* decrease mem now to avoid the memleak warning */ atomic_sub(sizeof(*iml), &sk->sk_omem_alloc); call_rcu(&iml->rcu, ip_mc_socklist_reclaim); -- cgit v0.10.2 From 53f57357ff0afc37804f4e82ee3123e0c0a2cad6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Mon, 8 Nov 2010 13:23:05 +0000 Subject: r8169: revert "Handle rxfifo errors on 8168 chips" The original patch helps under obscure conditions (no pun) but some 8168 do not like it. The change needs to be tightened with a specific 8168 version. This reverts commit 801e147cde02f04b5c2f42764cd43a89fc7400a2 ("r8169: Handle rxfifo errors on 8168 chips"). Regression at https://bugzilla.kernel.org/show_bug.cgi?id=20882 Signed-off-by: Francois Romieu Tested-by: Andreas Radke Cc: Matthew Garrett Cc: Daniel J Blueman Signed-off-by: David S. Miller diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index d88ce9f..3a0877e 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -2931,7 +2931,7 @@ static const struct rtl_cfg_info { .hw_start = rtl_hw_start_8168, .region = 2, .align = 8, - .intr_event = SYSErr | RxFIFOOver | LinkChg | RxOverflow | + .intr_event = SYSErr | LinkChg | RxOverflow | TxErr | TxOK | RxOK | RxErr, .napi_event = TxErr | TxOK | RxOK | RxOverflow, .features = RTL_FEATURE_GMII | RTL_FEATURE_MSI, @@ -4588,7 +4588,8 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) } /* Work around for rx fifo overflow */ - if (unlikely(status & RxFIFOOver)) { + if (unlikely(status & RxFIFOOver) && + (tp->mac_version == RTL_GIGA_MAC_VER_11)) { netif_stop_queue(dev); rtl8169_tx_timeout(dev); break; -- cgit v0.10.2 From ea80907ff066edd1dd43c5fe90ae6677d15e6384 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Mon, 8 Nov 2010 13:23:58 +0000 Subject: r8169: fix sleeping while holding spinlock. As device_set_wakeup_enable can now sleep, move the call to outside the critical section. Signed-off-by: Daniel J Blueman Acked-by: Rafael J. Wysocki Acked-by: Andrew Hendry Signed-off-by: David S. Miller diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 3a0877e..4c4d169 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -846,10 +846,10 @@ static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) else tp->features &= ~RTL_FEATURE_WOL; __rtl8169_set_wol(tp, wol->wolopts); - device_set_wakeup_enable(&tp->pci_dev->dev, wol->wolopts); - spin_unlock_irq(&tp->lock); + device_set_wakeup_enable(&tp->pci_dev->dev, wol->wolopts); + return 0; } -- cgit v0.10.2 From 4f52610e290eb6bf63522b0dad886ac88c7623cd Mon Sep 17 00:00:00 2001 From: Stefan Ringel Date: Wed, 27 Oct 2010 16:48:05 -0300 Subject: [media] tm6000: bugfix set tv standards bugfix set tv standards Signed-off-by: Stefan Ringel Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/staging/tm6000/tm6000-video.c b/drivers/staging/tm6000/tm6000-video.c index 9ec8279..c5690b2 100644 --- a/drivers/staging/tm6000/tm6000-video.c +++ b/drivers/staging/tm6000/tm6000-video.c @@ -1032,6 +1032,7 @@ static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *norm) struct tm6000_fh *fh=priv; struct tm6000_core *dev = fh->dev; + dev->norm = *norm; rc = tm6000_init_analog_mode(dev); fh->width = dev->width; -- cgit v0.10.2 From a8de6635799b58b52c610da9ee390a3e900e7bc7 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 5 Nov 2010 06:26:03 -0300 Subject: [media] ARM mx3_camera: check for DMA engine type We have two dma engines in MX3 systems: The IPU and the SDMA engine. We have to check if we got a channel from the correct engine before proceeding with a channel. Signed-off-by: Sascha Hauer Cc: Guennadi Liakhovetski Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index 29c5fc3..aa871c2 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -27,6 +27,7 @@ #include #include +#include #define MX3_CAM_DRV_NAME "mx3-camera" @@ -638,6 +639,9 @@ static bool chan_filter(struct dma_chan *chan, void *arg) struct dma_chan_request *rq = arg; struct mx3_camera_pdata *pdata; + if (!imx_dma_is_ipu(chan)) + return false; + if (!rq) return false; -- cgit v0.10.2 From 352f5d250ad395c678eebb2c9e1ad8b06114c6e9 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 2 Nov 2010 12:08:51 -0300 Subject: [media] SoC Camera: OMAP1: update for recent framework changes The recently added OMAP1 camera driver was not ready for one video queue per device framework changes. Fix it. Created and tested against linux-2.6.37-rc1. Signed-off-by: Janusz Krzysztofik Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c index 7c30e62b..5ec38f8 100644 --- a/drivers/media/video/omap1_camera.c +++ b/drivers/media/video/omap1_camera.c @@ -1386,7 +1386,7 @@ static void omap1_cam_init_videobuf(struct videobuf_queue *q, } } -static int omap1_cam_reqbufs(struct soc_camera_file *icf, +static int omap1_cam_reqbufs(struct soc_camera_device *icd, struct v4l2_requestbuffers *p) { int i; @@ -1398,7 +1398,7 @@ static int omap1_cam_reqbufs(struct soc_camera_file *icf, * it hadn't triggered */ for (i = 0; i < p->count; i++) { - struct omap1_cam_buf *buf = container_of(icf->vb_vidq.bufs[i], + struct omap1_cam_buf *buf = container_of(icd->vb_vidq.bufs[i], struct omap1_cam_buf, vb); buf->inwork = 0; INIT_LIST_HEAD(&buf->vb.queue); @@ -1485,10 +1485,10 @@ static int omap1_cam_set_bus_param(struct soc_camera_device *icd, static unsigned int omap1_cam_poll(struct file *file, poll_table *pt) { - struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = file->private_data; struct omap1_cam_buf *buf; - buf = list_entry(icf->vb_vidq.stream.next, struct omap1_cam_buf, + buf = list_entry(icd->vb_vidq.stream.next, struct omap1_cam_buf, vb.stream); poll_wait(file, &buf->vb.done, pt); -- cgit v0.10.2 From c9a7ec8e543c105e3f661c2e290ce703d7d5d31e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 9 Nov 2010 09:11:49 -0800 Subject: USB: the development of the usb tree is now in git So change the MAINTAINERS file to properly reflect this. Signed-off-by: Greg Kroah-Hartman diff --git a/MAINTAINERS b/MAINTAINERS index 0094224..5213f1f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6233,7 +6233,7 @@ USB SUBSYSTEM M: Greg Kroah-Hartman L: linux-usb@vger.kernel.org W: http://www.linux-usb.org -T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git S: Supported F: Documentation/usb/ F: drivers/net/usb/ -- cgit v0.10.2 From 97b5519b08086eec02f2241b6764d73f997014c9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 9 Nov 2010 09:13:39 -0800 Subject: Staging: the MAINTAINERS git location was incorrect The tree has moved to "staging-2.6" not "staging-next-2.6" as all of the staging development is now done in git, not just for the next tree. Signed-off-by: Greg Kroah-Hartman diff --git a/MAINTAINERS b/MAINTAINERS index 0094224..a17b26c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5676,7 +5676,7 @@ S: Maintained STAGING SUBSYSTEM M: Greg Kroah-Hartman -T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6.git L: devel@driverdev.osuosl.org S: Maintained F: drivers/staging/ -- cgit v0.10.2 From 8c66caebdace925f19fcfd2d1f026044c3995c4b Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 2 Nov 2010 12:22:32 -0300 Subject: [media] SoC Camera: OMAP1: update for recent videobuf changes Recent locking related videobuf changes has not been incorporated into the new OMAP1 camera driver. Fix it. Created and tested against linux-2.6.37-rc1. Signed-off-by: Janusz Krzysztofik Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c index 5ec38f8..674f74e 100644 --- a/drivers/media/video/omap1_camera.c +++ b/drivers/media/video/omap1_camera.c @@ -235,7 +235,7 @@ static void free_buffer(struct videobuf_queue *vq, struct omap1_cam_buf *buf, BUG_ON(in_interrupt()); - videobuf_waiton(vb, 0, 0); + videobuf_waiton(vq, vb, 0, 0); if (vb_mode == OMAP1_CAM_DMA_CONTIG) { videobuf_dma_contig_free(vq, vb); @@ -1365,12 +1365,12 @@ static void omap1_cam_init_videobuf(struct videobuf_queue *q, videobuf_queue_dma_contig_init(q, &omap1_videobuf_ops, icd->dev.parent, &pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE, - sizeof(struct omap1_cam_buf), icd); + sizeof(struct omap1_cam_buf), icd, NULL); else videobuf_queue_sg_init(q, &omap1_videobuf_ops, icd->dev.parent, &pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE, - sizeof(struct omap1_cam_buf), icd); + sizeof(struct omap1_cam_buf), icd, NULL); /* use videobuf mode (auto)selected with the module parameter */ pcdev->vb_mode = sg_mode ? OMAP1_CAM_DMA_SG : OMAP1_CAM_DMA_CONTIG; -- cgit v0.10.2 From 3da39bca44d285d87e4a886c6de84e57bd8ef3bf Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 9 Nov 2010 09:15:40 -0800 Subject: tty: the development tree is now done in git So properly mark it as such in the MAINTAINERS file. Signed-off-by: Greg Kroah-Hartman diff --git a/MAINTAINERS b/MAINTAINERS index 0094224..4c43733 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -161,7 +161,7 @@ M: Greg Kroah-Hartman L: linux-serial@vger.kernel.org W: http://serial.sourceforge.net S: Maintained -T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git F: drivers/serial/8250* F: include/linux/serial_8250.h @@ -5910,7 +5910,7 @@ S: Maintained TTY LAYER M: Greg Kroah-Hartman S: Maintained -T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git F: drivers/char/tty_* F: drivers/serial/serial_core.c F: include/linux/serial_core.h -- cgit v0.10.2 From 4b35e625da69654a71515444c1c0a6b6ce84ad2f Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 2 Nov 2010 12:30:48 -0300 Subject: [media] SOC Camera: OMAP1: typo fix Fix an outstanding typo in the recently added driver, as requested by the subsystem maintainer. Created against linux-2.6.37-rc1. Signed-off-by: Janusz Krzysztofik Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c index 674f74e..cbfd07f 100644 --- a/drivers/media/video/omap1_camera.c +++ b/drivers/media/video/omap1_camera.c @@ -504,7 +504,7 @@ static void omap1_videobuf_queue(struct videobuf_queue *vq, * empty. Since the transfer of the DMA programming register set * content to the DMA working register set is done automatically * by the DMA hardware, this can pretty well happen while we - * are keeping the lock here. Levae fetching it from the queue + * are keeping the lock here. Leave fetching it from the queue * to be done when a next DMA interrupt occures instead. */ return; -- cgit v0.10.2 From d889eb1e0e371c15c24bd5c46dd2b18d5e3694e5 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 2 Nov 2010 13:14:36 -0300 Subject: [media] SoC Camera: ov6650: minor cleanups This is a followup patch that addresses two minor issues left in the recently added ov6650 sensor driver, as I've promised to the subsystem maintainer: - remove a pair of extra brackets, - drop useless case for not possible v4l2_mbus_pixelcode enum value of 0. Created against linux-2.6.37-rc1. Signed-off-by: Janusz Krzysztofik Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c index b7cfeab..31f1937 100644 --- a/drivers/media/video/ov6650.c +++ b/drivers/media/video/ov6650.c @@ -754,7 +754,7 @@ static int ov6650_g_fmt(struct v4l2_subdev *sd, static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect) { - return (width > rect->width >> 1 || height > rect->height >> 1); + return width > rect->width >> 1 || height > rect->height >> 1; } static u8 to_clkrc(struct v4l2_fract *timeperframe, @@ -840,8 +840,6 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) coma_mask |= COMA_BW | COMA_BYTE_SWAP | COMA_WORD_SWAP; coma_set |= COMA_RAW_RGB | COMA_RGB; break; - case 0: - break; default: dev_err(&client->dev, "Pixel format not handled: 0x%x\n", code); return -EINVAL; -- cgit v0.10.2 From 6b101926f98b54549128db4d34f4a73b5f03fecc Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 8 Nov 2010 17:52:45 -0300 Subject: [media] soc-camera: Compile fixes for mx2-camera mx2-camera got broken during the last merge window. This patch fixes this and removes some unused variables. Signed-off-by: Sascha Hauer Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c index 4a27862..072bd2d 100644 --- a/drivers/media/video/mx2_camera.c +++ b/drivers/media/video/mx2_camera.c @@ -31,6 +31,7 @@ #include #include +#include #include #include #include @@ -903,8 +904,6 @@ static int mx2_camera_set_crop(struct soc_camera_device *icd, static int mx2_camera_set_fmt(struct soc_camera_device *icd, struct v4l2_format *f) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); - struct mx2_camera_dev *pcdev = ici->priv; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); const struct soc_camera_format_xlate *xlate; struct v4l2_pix_format *pix = &f->fmt.pix; @@ -943,8 +942,6 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd, static int mx2_camera_try_fmt(struct soc_camera_device *icd, struct v4l2_format *f) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); - struct mx2_camera_dev *pcdev = ici->priv; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); const struct soc_camera_format_xlate *xlate; struct v4l2_pix_format *pix = &f->fmt.pix; @@ -1024,13 +1021,13 @@ static int mx2_camera_querycap(struct soc_camera_host *ici, return 0; } -static int mx2_camera_reqbufs(struct soc_camera_file *icf, +static int mx2_camera_reqbufs(struct soc_camera_device *icd, struct v4l2_requestbuffers *p) { int i; for (i = 0; i < p->count; i++) { - struct mx2_buffer *buf = container_of(icf->vb_vidq.bufs[i], + struct mx2_buffer *buf = container_of(icd->vb_vidq.bufs[i], struct mx2_buffer, vb); INIT_LIST_HEAD(&buf->vb.queue); } @@ -1151,9 +1148,9 @@ err_out: static unsigned int mx2_camera_poll(struct file *file, poll_table *pt) { - struct soc_camera_file *icf = file->private_data; + struct soc_camera_device *icd = file->private_data; - return videobuf_poll_stream(file, &icf->vb_vidq, pt); + return videobuf_poll_stream(file, &icd->vb_vidq, pt); } static struct soc_camera_host_ops mx2_soc_camera_host_ops = { -- cgit v0.10.2 From 88f8a5e3e7defccd3925cabb1ee4d3994e5cdb52 Mon Sep 17 00:00:00 2001 From: Kulikov Vasiliy Date: Sun, 31 Oct 2010 07:10:32 +0000 Subject: net: tipc: fix information leak to userland Structure sockaddr_tipc is copied to userland with padding bytes after "id" field in union field "name" unitialized. It leads to leaking of contents of kernel stack memory. We have to initialize them to zero. Signed-off-by: Vasiliy Kulikov Signed-off-by: David S. Miller diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 33217fc..e9f0d50 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -396,6 +396,7 @@ static int get_name(struct socket *sock, struct sockaddr *uaddr, struct sockaddr_tipc *addr = (struct sockaddr_tipc *)uaddr; struct tipc_sock *tsock = tipc_sk(sock->sk); + memset(addr, 0, sizeof(*addr)); if (peer) { if ((sock->state != SS_CONNECTED) && ((peer != 2) || (sock->state != SS_DISCONNECTING))) -- cgit v0.10.2 From 0059b2436a86fedb2747f654f8e10a67e97d8614 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 8 Nov 2010 22:20:29 +0100 Subject: x86: Address gcc4.6 "set but not used" warnings in apic.h native_apic_msr_read() and x2apic_enabled() use rdmsr(msr, low, high), but only use the low part. gcc4.6 complains about this: .../apic.h:144:11: warning: variable 'high' set but not used [-Wunused-but-set-variable] rdmsr() is just a wrapper around rdmsrl() which splits the 64bit value into low and high, so using rdmsrl() directly solves this. [tglx: Changed the variables to u64 as suggested by Cyrill. It's less confusing and has no code impact as this is 64bit only anyway. Massaged changelog as well. ] Signed-off-by: Andi Kleen Cc: x86@kernel.org Cc: Cyrill Gorcunov LKML-Reference: <1289251229-19589-1-git-send-email-andi@firstfloor.org> Signed-off-by: Thomas Gleixner diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 286de34..f6ce0bd 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -141,13 +141,13 @@ static inline void native_apic_msr_write(u32 reg, u32 v) static inline u32 native_apic_msr_read(u32 reg) { - u32 low, high; + u64 msr; if (reg == APIC_DFR) return -1; - rdmsr(APIC_BASE_MSR + (reg >> 4), low, high); - return low; + rdmsrl(APIC_BASE_MSR + (reg >> 4), msr); + return (u32)msr; } static inline void native_x2apic_wait_icr_idle(void) @@ -181,12 +181,12 @@ extern void enable_x2apic(void); extern void x2apic_icr_write(u32 low, u32 id); static inline int x2apic_enabled(void) { - int msr, msr2; + u64 msr; if (!cpu_has_x2apic) return 0; - rdmsr(MSR_IA32_APICBASE, msr, msr2); + rdmsrl(MSR_IA32_APICBASE, msr); if (msr & X2APIC_ENABLE) return 1; return 0; -- cgit v0.10.2 From 63bfd7384b119409685a17d5c58f0b56e5dc03da Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Mon, 8 Nov 2010 21:29:07 +0200 Subject: perf_events: Fix perf_counter_mmap() hook in mprotect() As pointed out by Linus, commit dab5855 ("perf_counter: Add mmap event hooks to mprotect()") is fundamentally wrong as mprotect_fixup() can free 'vma' due to merging. Fix the problem by moving perf_event_mmap() hook to mprotect_fixup(). Note: there's another successful return path from mprotect_fixup() if old flags equal to new flags. We don't, however, need to call perf_event_mmap() there because 'perf' already knows the VMA is executable. Reported-by: Dave Jones Analyzed-by: Linus Torvalds Cc: Ingo Molnar Reviewed-by: Peter Zijlstra Signed-off-by: Pekka Enberg Signed-off-by: Linus Torvalds diff --git a/mm/mprotect.c b/mm/mprotect.c index 2d1bf7c..4c51338 100644 --- a/mm/mprotect.c +++ b/mm/mprotect.c @@ -211,6 +211,7 @@ success: mmu_notifier_invalidate_range_end(mm, start, end); vm_stat_account(mm, oldflags, vma->vm_file, -nrpages); vm_stat_account(mm, newflags, vma->vm_file, nrpages); + perf_event_mmap(vma); return 0; fail: @@ -299,7 +300,6 @@ SYSCALL_DEFINE3(mprotect, unsigned long, start, size_t, len, error = mprotect_fixup(vma, &prev, nstart, tmp, newflags); if (error) goto out; - perf_event_mmap(vma); nstart = tmp; if (nstart < prev->vm_end) -- cgit v0.10.2 From 7379efeacb707f49729080791a7a562d8996aec4 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Mon, 8 Nov 2010 18:45:21 -0800 Subject: iwlwifi: dont use pci_dev before it being assign In order to use build-in debugging macro, pci_dev in priv need to be assigned first. This fix iwl3945 driver oopsed at boot with 2.6.37-rc1 Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 8f8c4b7..7edf8c2 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -4000,7 +4000,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e * "the hard way", rather than using device's scan. */ if (iwl3945_mod_params.disable_hw_scan) { - IWL_ERR(priv, "sw scan support is deprecated\n"); + dev_printk(KERN_DEBUG, &(pdev->dev), + "sw scan support is deprecated\n"); iwl3945_hw_ops.hw_scan = NULL; } -- cgit v0.10.2 From 332dd96f7ac15e937088fe11f15cfe0210e8edd1 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 9 Nov 2010 11:46:33 -0800 Subject: net/dst: dst_dev_event() called after other notifiers Followup of commit ef885afbf8a37689 (net: use rcu_barrier() in rollback_registered_many) dst_dev_event() scans a garbage dst list that might be feeded by various network notifiers at device dismantle time. Its important to call dst_dev_event() after other notifiers, or we might enter the infamous msleep(250) in netdev_wait_allrefs(), and wait one second before calling again call_netdevice_notifiers(NETDEV_UNREGISTER, dev) to properly remove last device references. Use priority -10 to let dst_dev_notifier be called after other network notifiers (they have the default 0 priority) Reported-by: Ben Greear Reported-by: Nicolas Dichtel Reported-by: Octavian Purdila Reported-by: Benjamin LaHaise Tested-by: Ben Greear Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/core/dst.c b/net/core/dst.c index 8abe628..b99c7c7 100644 --- a/net/core/dst.c +++ b/net/core/dst.c @@ -370,6 +370,7 @@ static int dst_dev_event(struct notifier_block *this, unsigned long event, static struct notifier_block dst_dev_notifier = { .notifier_call = dst_dev_event, + .priority = -10, /* must be called after other network notifiers */ }; void __init dst_init(void) -- cgit v0.10.2 From c888d4e7b2644c7ff17098b0b521c29b98e0abd0 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Sun, 10 Oct 2010 21:28:39 +0400 Subject: staging: cpia: fix camera file owner in cpia_open() Use effective UID instead of real UID for camera owner. There is no need to check for pending signals just before successfull return. Exit in case of pending signal also leaved camera in open state. Signed-off-by: Vasiliy Kulikov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/cpia/cpia.c b/drivers/staging/cpia/cpia.c index 933ae4c..0e740b8 100644 --- a/drivers/staging/cpia/cpia.c +++ b/drivers/staging/cpia/cpia.c @@ -3184,13 +3184,9 @@ static int cpia_open(struct file *file) goto oops; } - err = -EINTR; - if(signal_pending(current)) - goto oops; - /* Set ownership of /proc/cpia/videoX to current user */ if(cam->proc_entry) - cam->proc_entry->uid = current_uid(); + cam->proc_entry->uid = current_euid(); /* set mark for loading first frame uncompressed */ cam->first_frame = 1; -- cgit v0.10.2 From ea07a9f2557b8ea99a0cdd778a5d94a7495bb049 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Sun, 10 Oct 2010 21:28:51 +0400 Subject: staging: stradis: fix error handling and information leak to userland configure_saa7146() didn't free irq on error. saa_open() didn't decrease reference count of saa on error. saa_ioctl() leaked information from the kernel stack to userland as it didn't fill copied structs with zeros. Signed-off-by: Vasiliy Kulikov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/stradis/stradis.c b/drivers/staging/stradis/stradis.c index a057824..807dd7e 100644 --- a/drivers/staging/stradis/stradis.c +++ b/drivers/staging/stradis/stradis.c @@ -1286,6 +1286,7 @@ static long saa_ioctl(struct file *file, case VIDIOCGCAP: { struct video_capability b; + memset(&b, 0, sizeof(b)); strcpy(b.name, saa->video_dev.name); b.type = VID_TYPE_CAPTURE | VID_TYPE_OVERLAY | VID_TYPE_CLIPPING | VID_TYPE_FRAMERAM | @@ -1416,6 +1417,7 @@ static long saa_ioctl(struct file *file, case VIDIOCGWIN: { struct video_window vw; + memset(&vw, 0, sizeof(vw)); vw.x = saa->win.x; vw.y = saa->win.y; vw.width = saa->win.width; @@ -1448,6 +1450,7 @@ static long saa_ioctl(struct file *file, case VIDIOCGFBUF: { struct video_buffer v; + memset(&v, 0, sizeof(v)); v.base = (void *)saa->win.vidadr; v.height = saa->win.sheight; v.width = saa->win.swidth; @@ -1492,6 +1495,7 @@ static long saa_ioctl(struct file *file, case VIDIOCGAUDIO: { struct video_audio v; + memset(&v, 0, sizeof(v)); v = saa->audio_dev; v.flags &= ~(VIDEO_AUDIO_MUTE | VIDEO_AUDIO_MUTABLE); v.flags |= VIDEO_AUDIO_MUTABLE | VIDEO_AUDIO_VOLUME; @@ -1534,6 +1538,7 @@ static long saa_ioctl(struct file *file, case VIDIOCGUNIT: { struct video_unit vu; + memset(&vu, 0, sizeof(vu)); vu.video = saa->video_dev.minor; vu.vbi = VIDEO_NO_UNIT; vu.radio = VIDEO_NO_UNIT; @@ -1888,6 +1893,7 @@ static int saa_open(struct file *file) saa->user++; if (saa->user > 1) { + saa->user--; unlock_kernel(); return 0; /* device open already, don't reset */ } @@ -2000,10 +2006,13 @@ static int __devinit configure_saa7146(struct pci_dev *pdev, int num) if (retval < 0) { dev_err(&pdev->dev, "%d: error in registering video device!\n", num); - goto errio; + goto errirq; } return 0; + +errirq: + free_irq(saa->irq, saa); errio: iounmap(saa->saa7146_mem); err: -- cgit v0.10.2 From 3b97eed201376db6c4487fc846022eb4ffa7e1f9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 19 Oct 2010 07:56:24 +0200 Subject: Staging: sst: dereferencing user pointers This code dereferences user supplied pointers directly instead of doing a copy_from_user(). Some kernel configs put user and kernel memory in different address spaces so this code isn't portable. Also the user memory could be swapped out or in this case the pointer could just be NULL leading to an oops. Another thing is that it makes permission tests like this sort of meaningless. if (minor == STREAM_MODULE && rec_mute->stream_id == 0) { retval = -EPERM; break; } The user could set stream_id to 1 for the test and then change it later. Signed-off-by: Dan Carpenter Acked-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c index 463e5cb..a0d13ee 100644 --- a/drivers/staging/intel_sst/intel_sst_app_interface.c +++ b/drivers/staging/intel_sst/intel_sst_app_interface.c @@ -885,41 +885,39 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) break; } case _IOC_NR(SNDRV_SST_SET_VOL): { - struct snd_sst_vol *set_vol; - struct snd_sst_vol *rec_vol = (struct snd_sst_vol *)arg; + struct snd_sst_vol set_vol; + + if (copy_from_user(&set_vol, (void __user *)arg, + sizeof(set_vol))) { + pr_debug("sst: copy failed\n"); + retval = -EFAULT; + break; + } pr_debug("sst: SET_VOLUME recieved for %d!\n", - rec_vol->stream_id); - if (minor == STREAM_MODULE && rec_vol->stream_id == 0) { + set_vol.stream_id); + if (minor == STREAM_MODULE && set_vol.stream_id == 0) { pr_debug("sst: invalid operation!\n"); retval = -EPERM; break; } - set_vol = kzalloc(sizeof(*set_vol), GFP_ATOMIC); - if (!set_vol) { - pr_debug("sst: mem allocation failed\n"); - retval = -ENOMEM; - break; - } - if (copy_from_user(set_vol, rec_vol, sizeof(*set_vol))) { - pr_debug("sst: copy failed\n"); - retval = -EFAULT; - break; - } - retval = sst_set_vol(set_vol); - kfree(set_vol); + retval = sst_set_vol(&set_vol); break; } case _IOC_NR(SNDRV_SST_GET_VOL): { - struct snd_sst_vol *rec_vol = (struct snd_sst_vol *)arg; struct snd_sst_vol get_vol; + + if (copy_from_user(&get_vol, (void __user *)arg, + sizeof(get_vol))) { + retval = -EFAULT; + break; + } pr_debug("sst: IOCTL_GET_VOLUME recieved for stream = %d!\n", - rec_vol->stream_id); - if (minor == STREAM_MODULE && rec_vol->stream_id == 0) { + get_vol.stream_id); + if (minor == STREAM_MODULE && get_vol.stream_id == 0) { pr_debug("sst: invalid operation!\n"); retval = -EPERM; break; } - get_vol.stream_id = rec_vol->stream_id; retval = sst_get_vol(&get_vol); if (retval) { retval = -EIO; @@ -938,25 +936,20 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) } case _IOC_NR(SNDRV_SST_MUTE): { - struct snd_sst_mute *set_mute; - struct snd_sst_vol *rec_mute = (struct snd_sst_vol *)arg; - pr_debug("sst: SNDRV_SST_SET_VOLUME recieved for %d!\n", - rec_mute->stream_id); - if (minor == STREAM_MODULE && rec_mute->stream_id == 0) { - retval = -EPERM; - break; - } - set_mute = kzalloc(sizeof(*set_mute), GFP_ATOMIC); - if (!set_mute) { - retval = -ENOMEM; + struct snd_sst_mute set_mute; + + if (copy_from_user(&set_mute, (void __user *)arg, + sizeof(set_mute))) { + retval = -EFAULT; break; } - if (copy_from_user(set_mute, rec_mute, sizeof(*set_mute))) { - retval = -EFAULT; + pr_debug("sst: SNDRV_SST_SET_VOLUME recieved for %d!\n", + set_mute.stream_id); + if (minor == STREAM_MODULE && set_mute.stream_id == 0) { + retval = -EPERM; break; } - retval = sst_set_mute(set_mute); - kfree(set_mute); + retval = sst_set_mute(&set_mute); break; } case _IOC_NR(SNDRV_SST_STREAM_GET_PARAMS): { -- cgit v0.10.2 From bc704e31edc723a84c2469f26aa0279e1ddb948e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 19 Oct 2010 07:57:04 +0200 Subject: Staging: sst: more dereferencing user pointers This is another patch about making a copy of the data into kernel space before using it. It is easy to trigger a kernel oops in the original code. If you passed a NULL to SNDRV_SST_SET_TARGET_DEVICE then it called BUG_ON(). And SNDRV_SST_DRIVER_INFO would let you write the information to arbitrary memory locations which is a security violation. Signed-off-by: Dan Carpenter Acked-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c index a0d13ee..8390aa7 100644 --- a/drivers/staging/intel_sst/intel_sst_app_interface.c +++ b/drivers/staging/intel_sst/intel_sst_app_interface.c @@ -838,7 +838,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) break; case _IOC_NR(SNDRV_SST_STREAM_SET_PARAMS): { - struct snd_sst_params *str_param = (struct snd_sst_params *)arg; + struct snd_sst_params str_param; pr_debug("sst: IOCTL_SET_PARAMS recieved!\n"); if (minor != STREAM_MODULE) { @@ -846,17 +846,25 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) break; } + if (copy_from_user(&str_param, (void __user *)arg, + sizeof(str_param))) { + retval = -EFAULT; + break; + } + if (!str_id) { - retval = sst_get_stream(str_param); + retval = sst_get_stream(&str_param); if (retval > 0) { struct stream_info *str_info; + char __user *dest; + sst_drv_ctx->stream_cnt++; data->str_id = retval; str_info = &sst_drv_ctx->streams[retval]; str_info->src = SST_DRV; - retval = copy_to_user(&str_param->stream_id, - &retval, sizeof(__u32)); + dest = (char *)arg + offsetof(struct snd_sst_params, stream_id); + retval = copy_to_user(dest, &retval, sizeof(__u32)); if (retval) retval = -EFAULT; } else { @@ -866,16 +874,14 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) } else { pr_debug("sst: SET_STREAM_PARAMS recieved!\n"); /* allocated set params only */ - retval = sst_set_stream_param(str_id, str_param); + retval = sst_set_stream_param(str_id, &str_param); /* Block the call for reply */ if (!retval) { int sfreq = 0, word_size = 0, num_channel = 0; - sfreq = str_param->sparams.uc.pcm_params.sfreq; - word_size = str_param->sparams. - uc.pcm_params.pcm_wd_sz; - num_channel = str_param-> - sparams.uc.pcm_params.num_chan; - if (str_param->ops == STREAM_OPS_CAPTURE) { + sfreq = str_param.sparams.uc.pcm_params.sfreq; + word_size = str_param.sparams.uc.pcm_params.pcm_wd_sz; + num_channel = str_param.sparams.uc.pcm_params.num_chan; + if (str_param.ops == STREAM_OPS_CAPTURE) { sst_drv_ctx->scard_ops->\ set_pcm_audio_params(sfreq, word_size, num_channel); @@ -976,16 +982,22 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) } case _IOC_NR(SNDRV_SST_MMAP_PLAY): - case _IOC_NR(SNDRV_SST_MMAP_CAPTURE): + case _IOC_NR(SNDRV_SST_MMAP_CAPTURE): { + struct snd_sst_mmap_buffs mmap_buf; + pr_debug("sst: SNDRV_SST_MMAP_PLAY/CAPTURE recieved!\n"); if (minor != STREAM_MODULE) { retval = -EBADRQC; break; } - retval = intel_sst_mmap_play_capture(str_id, - (struct snd_sst_mmap_buffs *)arg); + if (copy_from_user(&mmap_buf, (void __user *)arg, + sizeof(mmap_buf))) { + retval = -EFAULT; + break; + } + retval = intel_sst_mmap_play_capture(str_id, &mmap_buf); break; - + } case _IOC_NR(SNDRV_SST_STREAM_DROP): pr_debug("sst: SNDRV_SST_IOCTL_DROP recieved!\n"); if (minor != STREAM_MODULE) { @@ -996,7 +1008,6 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) break; case _IOC_NR(SNDRV_SST_STREAM_GET_TSTAMP): { - unsigned long long *ms = (unsigned long long *)arg; struct snd_sst_tstamp tstamp = {0}; unsigned long long time, freq, mod; @@ -1013,7 +1024,8 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) freq = (unsigned long long) tstamp.sampling_frequency; time = time * 1000; /* converting it to ms */ mod = do_div(time, freq); - if (copy_to_user(ms, &time, sizeof(*ms))) + if (copy_to_user((void __user *)arg, &time, + sizeof(unsigned long long))) retval = -EFAULT; break; } @@ -1058,32 +1070,37 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) } case _IOC_NR(SNDRV_SST_SET_TARGET_DEVICE): { - struct snd_sst_target_device *target_device; + struct snd_sst_target_device target_device; pr_debug("sst: SET_TARGET_DEVICE recieved!\n"); - target_device = (struct snd_sst_target_device *)arg; - BUG_ON(!target_device); + if (copy_from_user(&target_device, (void __user *)arg, + sizeof(target_device))) { + retval = -EFAULT; + break; + } if (minor != AM_MODULE) { retval = -EBADRQC; break; } - retval = sst_target_device_select(target_device); + retval = sst_target_device_select(&target_device); break; } case _IOC_NR(SNDRV_SST_DRIVER_INFO): { - struct snd_sst_driver_info *info = - (struct snd_sst_driver_info *)arg; + struct snd_sst_driver_info info; pr_debug("sst: SNDRV_SST_DRIVER_INFO recived\n"); - info->version = SST_VERSION_NUM; + info.version = SST_VERSION_NUM; /* hard coding, shud get sumhow later */ - info->active_pcm_streams = sst_drv_ctx->stream_cnt - + info.active_pcm_streams = sst_drv_ctx->stream_cnt - sst_drv_ctx->encoded_cnt; - info->active_enc_streams = sst_drv_ctx->encoded_cnt; - info->max_pcm_streams = MAX_ACTIVE_STREAM - MAX_ENC_STREAM; - info->max_enc_streams = MAX_ENC_STREAM; - info->buf_per_stream = sst_drv_ctx->mmap_len; + info.active_enc_streams = sst_drv_ctx->encoded_cnt; + info.max_pcm_streams = MAX_ACTIVE_STREAM - MAX_ENC_STREAM; + info.max_enc_streams = MAX_ENC_STREAM; + info.buf_per_stream = sst_drv_ctx->mmap_len; + if (copy_to_user((void __user *)arg, &info, + sizeof(info))) + retval = -EFAULT; break; } -- cgit v0.10.2 From e9f25689a86570c30d3f101b1f9834a579bed2e5 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 19 Oct 2010 07:57:48 +0200 Subject: Staging: sst: fixups in SNDRV_SST_STREAM_DECODE This is another patch about copying data to the kernel before using it. SNDRV_SST_STREAM_DECODE is sort of tricky because we need to do a copy_from_user() that gives us another two pointers and we have copy those. Those again give us some more pointers that we have to copy. Besides those problems, the code had a stack overflow: - struct snd_sst_buff_entry ibuf_temp[param->ibufs->entries], - obuf_temp[param->obufs->entries]; param->ibufs->entries comes from the user. Signed-off-by: Dan Carpenter Acked-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c index 8390aa7..d20724d 100644 --- a/drivers/staging/intel_sst/intel_sst_app_interface.c +++ b/drivers/staging/intel_sst/intel_sst_app_interface.c @@ -1105,62 +1105,83 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) } case _IOC_NR(SNDRV_SST_STREAM_DECODE): { - struct snd_sst_dbufs *param = - (struct snd_sst_dbufs *)arg, dbufs_local; - int i; + struct snd_sst_dbufs param; + struct snd_sst_dbufs dbufs_local; struct snd_sst_buffs ibufs, obufs; - struct snd_sst_buff_entry ibuf_temp[param->ibufs->entries], - obuf_temp[param->obufs->entries]; + struct snd_sst_buff_entry *ibuf_tmp, *obuf_tmp; + char __user *dest; pr_debug("sst: SNDRV_SST_STREAM_DECODE recived\n"); if (minor != STREAM_MODULE) { retval = -EBADRQC; break; } - if (!param) { - retval = -EINVAL; + if (copy_from_user(¶m, (void __user *)arg, + sizeof(param))) { + retval = -EFAULT; break; } - dbufs_local.input_bytes_consumed = param->input_bytes_consumed; + dbufs_local.input_bytes_consumed = param.input_bytes_consumed; dbufs_local.output_bytes_produced = - param->output_bytes_produced; - dbufs_local.ibufs = &ibufs; - dbufs_local.obufs = &obufs; - dbufs_local.ibufs->entries = param->ibufs->entries; - dbufs_local.ibufs->type = param->ibufs->type; - dbufs_local.obufs->entries = param->obufs->entries; - dbufs_local.obufs->type = param->obufs->type; - - dbufs_local.ibufs->buff_entry = ibuf_temp; - for (i = 0; i < dbufs_local.ibufs->entries; i++) { - ibuf_temp[i].buffer = - param->ibufs->buff_entry[i].buffer; - ibuf_temp[i].size = - param->ibufs->buff_entry[i].size; + param.output_bytes_produced; + + if (copy_from_user(&ibufs, param.ibufs, sizeof(ibufs))) { + retval = -EFAULT; + break; + } + if (copy_from_user(&obufs, param.obufs, sizeof(obufs))) { + retval = -EFAULT; + break; + } + + ibuf_tmp = kcalloc(ibufs.entries, sizeof(*ibuf_tmp), GFP_KERNEL); + obuf_tmp = kcalloc(obufs.entries, sizeof(*obuf_tmp), GFP_KERNEL); + if (!ibuf_tmp || !obuf_tmp) { + retval = -ENOMEM; + goto free_iobufs; + } + + if (copy_from_user(ibuf_tmp, ibufs.buff_entry, + ibufs.entries * sizeof(*ibuf_tmp))) { + retval = -EFAULT; + goto free_iobufs; } - dbufs_local.obufs->buff_entry = obuf_temp; - for (i = 0; i < dbufs_local.obufs->entries; i++) { - obuf_temp[i].buffer = - param->obufs->buff_entry[i].buffer; - obuf_temp[i].size = - param->obufs->buff_entry[i].size; + ibufs.buff_entry = ibuf_tmp; + dbufs_local.ibufs = &ibufs; + + if (copy_from_user(obuf_tmp, obufs.buff_entry, + obufs.entries * sizeof(*obuf_tmp))) { + retval = -EFAULT; + goto free_iobufs; } + obufs.buff_entry = obuf_tmp; + dbufs_local.obufs = &obufs; + retval = sst_decode(str_id, &dbufs_local); - if (retval) - retval = -EAGAIN; - if (copy_to_user(¶m->input_bytes_consumed, + if (retval) { + retval = -EAGAIN; + goto free_iobufs; + } + + dest = (char *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed); + if (copy_to_user(dest, &dbufs_local.input_bytes_consumed, sizeof(unsigned long long))) { - retval = -EFAULT; - break; + retval = -EFAULT; + goto free_iobufs; } - if (copy_to_user(¶m->output_bytes_produced, + + dest = (char *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed); + if (copy_to_user(dest, &dbufs_local.output_bytes_produced, sizeof(unsigned long long))) { - retval = -EFAULT; - break; + retval = -EFAULT; + goto free_iobufs; } +free_iobufs: + kfree(ibuf_tmp); + kfree(obuf_tmp); break; } -- cgit v0.10.2 From 08da782b1a58fd63199928176909e103477c933a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 20 Oct 2010 08:57:34 +0200 Subject: Staging: sst: user pointers in intel_sst_mmap_play_capture() There were some places in intel_sst_mmap_play_capture() that dereferenced user pointers instead of copying the data to the kernel. I removed the BUG_ON(!mmap_buf) and BUG_ON(!buf_entry) since those are never possible in the current code. Signed-off-by: Dan Carpenter Cc: Vinod Koul Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c index d20724d..834bb61 100644 --- a/drivers/staging/intel_sst/intel_sst_app_interface.c +++ b/drivers/staging/intel_sst/intel_sst_app_interface.c @@ -244,12 +244,12 @@ static int intel_sst_mmap_play_capture(u32 str_id, int retval, i; struct stream_info *stream; struct snd_sst_mmap_buff_entry *buf_entry; + struct snd_sst_mmap_buff_entry *tmp_buf; pr_debug("sst:called for str_id %d\n", str_id); retval = sst_validate_strid(str_id); if (retval) return -EINVAL; - BUG_ON(!mmap_buf); stream = &sst_drv_ctx->streams[str_id]; if (stream->mmapped != true) @@ -262,14 +262,24 @@ static int intel_sst_mmap_play_capture(u32 str_id, stream->curr_bytes = 0; stream->cumm_bytes = 0; + tmp_buf = kcalloc(mmap_buf->entries, sizeof(*tmp_buf), GFP_KERNEL); + if (!tmp_buf) + return -ENOMEM; + if (copy_from_user(tmp_buf, (void __user *)mmap_buf->buff, + mmap_buf->entries * sizeof(*tmp_buf))) { + retval = -EFAULT; + goto out_free; + } + pr_debug("sst:new buffers count %d status %d\n", mmap_buf->entries, stream->status); - buf_entry = mmap_buf->buff; + buf_entry = tmp_buf; for (i = 0; i < mmap_buf->entries; i++) { - BUG_ON(!buf_entry); bufs = kzalloc(sizeof(*bufs), GFP_KERNEL); - if (!bufs) - return -ENOMEM; + if (!bufs) { + retval = -ENOMEM; + goto out_free; + } bufs->size = buf_entry->size; bufs->offset = buf_entry->offset; bufs->addr = sst_drv_ctx->mmap_mem; @@ -293,13 +303,15 @@ static int intel_sst_mmap_play_capture(u32 str_id, if (sst_play_frame(str_id) < 0) { pr_warn("sst: play frames fail\n"); mutex_unlock(&stream->lock); - return -EIO; + retval = -EIO; + goto out_free; } } else if (stream->ops == STREAM_OPS_CAPTURE) { if (sst_capture_frame(str_id) < 0) { pr_warn("sst: capture frame fail\n"); mutex_unlock(&stream->lock); - return -EIO; + retval = -EIO; + goto out_free; } } } @@ -314,6 +326,9 @@ static int intel_sst_mmap_play_capture(u32 str_id, if (retval >= 0) retval = stream->cumm_bytes; pr_debug("sst:end of play/rec ioctl bytes = %d!!\n", retval); + +out_free: + kfree(tmp_buf); return retval; } -- cgit v0.10.2 From 4fc718a4b0cdf3803f370e323ea5252a3d76f52d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 20 Oct 2010 08:58:30 +0200 Subject: Staging: sst: add some __user anotations This silences all the sparse warnings in intel_sst_app_interface.c. It was just a matter of adding __user annotations, I didn't find any real bugs here. Quite a few of these were needed for stuff I added earlier, sorry about that. I removed a couple casts to (void *) that caused a warning like: drivers/staging/intel_sst/intel_sst_app_interface.c:606:27: warning: cast removes address space of expression For example sst_drv_ctx->mailbox is already declared as "void __iomem *mailbox" so casting it to void pointer isn't necessary and it makes sparse complain because it removes the __user attribute. Signed-off-by: Dan Carpenter Cc: Vinod Koul Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c index 834bb61..9618c79 100644 --- a/drivers/staging/intel_sst/intel_sst_app_interface.c +++ b/drivers/staging/intel_sst/intel_sst_app_interface.c @@ -392,7 +392,7 @@ static int snd_sst_fill_kernel_list(struct stream_info *stream, { struct sst_stream_bufs *stream_bufs; unsigned long index, mmap_len; - unsigned char *bufp; + unsigned char __user *bufp; unsigned long size, copied_size; int retval = 0, add_to_list = 0; static int sent_offset; @@ -527,9 +527,7 @@ static int snd_sst_copy_userbuf_capture(struct stream_info *stream, /* copy to user */ list_for_each_entry_safe(entry, _entry, copy_to_list, node) { - if (copy_to_user((void *) - iovec[entry->iov_index].iov_base + - entry->iov_offset, + if (copy_to_user(iovec[entry->iov_index].iov_base + entry->iov_offset, kbufs->addr + entry->offset, entry->size)) { /* Clean up the list and return error */ @@ -605,7 +603,7 @@ static int intel_sst_read_write(unsigned int str_id, char __user *buf, buf, (int) count, (int) stream->status); stream->buf_type = SST_BUF_USER_STATIC; - iovec.iov_base = (void *)buf; + iovec.iov_base = buf; iovec.iov_len = count; nr_segs = 1; @@ -878,7 +876,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) data->str_id = retval; str_info = &sst_drv_ctx->streams[retval]; str_info->src = SST_DRV; - dest = (char *)arg + offsetof(struct snd_sst_params, stream_id); + dest = (char __user *)arg + offsetof(struct snd_sst_params, stream_id); retval = copy_to_user(dest, &retval, sizeof(__u32)); if (retval) retval = -EFAULT; @@ -947,7 +945,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) pr_debug("sst: id:%d\n, vol:%d, ramp_dur:%d, ramp_type:%d\n", get_vol.stream_id, get_vol.volume, get_vol.ramp_duration, get_vol.ramp_type); - if (copy_to_user((struct snd_sst_vol *)arg, + if (copy_to_user((struct snd_sst_vol __user *)arg, &get_vol, sizeof(get_vol))) { retval = -EFAULT; break; @@ -987,7 +985,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) retval = -EIO; break; } - if (copy_to_user((struct snd_sst_get_stream_params *)arg, + if (copy_to_user((struct snd_sst_get_stream_params __user *)arg, &get_params, sizeof(get_params))) { retval = -EFAULT; break; @@ -1032,8 +1030,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) break; } memcpy_fromio(&tstamp, - ((void *)(sst_drv_ctx->mailbox + SST_TIME_STAMP) - +(str_id * sizeof(tstamp))), + sst_drv_ctx->mailbox + SST_TIME_STAMP + str_id * sizeof(tstamp), sizeof(tstamp)); time = tstamp.samples_rendered; freq = (unsigned long long) tstamp.sampling_frequency; @@ -1141,11 +1138,11 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) dbufs_local.output_bytes_produced = param.output_bytes_produced; - if (copy_from_user(&ibufs, param.ibufs, sizeof(ibufs))) { + if (copy_from_user(&ibufs, (void __user *)param.ibufs, sizeof(ibufs))) { retval = -EFAULT; break; } - if (copy_from_user(&obufs, param.obufs, sizeof(obufs))) { + if (copy_from_user(&obufs, (void __user *)param.obufs, sizeof(obufs))) { retval = -EFAULT; break; } @@ -1157,7 +1154,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) goto free_iobufs; } - if (copy_from_user(ibuf_tmp, ibufs.buff_entry, + if (copy_from_user(ibuf_tmp, (void __user *)ibufs.buff_entry, ibufs.entries * sizeof(*ibuf_tmp))) { retval = -EFAULT; goto free_iobufs; @@ -1165,7 +1162,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) ibufs.buff_entry = ibuf_tmp; dbufs_local.ibufs = &ibufs; - if (copy_from_user(obuf_tmp, obufs.buff_entry, + if (copy_from_user(obuf_tmp, (void __user *)obufs.buff_entry, obufs.entries * sizeof(*obuf_tmp))) { retval = -EFAULT; goto free_iobufs; @@ -1179,7 +1176,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) goto free_iobufs; } - dest = (char *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed); + dest = (char __user *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed); if (copy_to_user(dest, &dbufs_local.input_bytes_consumed, sizeof(unsigned long long))) { @@ -1187,7 +1184,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg) goto free_iobufs; } - dest = (char *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed); + dest = (char __user *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed); if (copy_to_user(dest, &dbufs_local.output_bytes_produced, sizeof(unsigned long long))) { @@ -1210,7 +1207,7 @@ free_iobufs: break; case _IOC_NR(SNDRV_SST_STREAM_BYTES_DECODED): { - unsigned long long *bytes = (unsigned long long *)arg; + unsigned long long __user *bytes = (unsigned long long __user *)arg; struct snd_sst_tstamp tstamp = {0}; pr_debug("sst: STREAM_BYTES_DECODED recieved!\n"); @@ -1219,8 +1216,7 @@ free_iobufs: break; } memcpy_fromio(&tstamp, - ((void *)(sst_drv_ctx->mailbox + SST_TIME_STAMP) - +(str_id * sizeof(tstamp))), + sst_drv_ctx->mailbox + SST_TIME_STAMP + str_id * sizeof(tstamp), sizeof(tstamp)); if (copy_to_user(bytes, &tstamp.bytes_processed, sizeof(*bytes))) @@ -1243,7 +1239,7 @@ free_iobufs: kfree(fw_info); break; } - if (copy_to_user((struct snd_sst_dbufs *)arg, + if (copy_to_user((struct snd_sst_dbufs __user *)arg, fw_info, sizeof(*fw_info))) { kfree(fw_info); retval = -EFAULT; diff --git a/drivers/staging/intel_sst/intel_sst_common.h b/drivers/staging/intel_sst/intel_sst_common.h index 73a98c8..bf0ead7 100644 --- a/drivers/staging/intel_sst/intel_sst_common.h +++ b/drivers/staging/intel_sst/intel_sst_common.h @@ -231,8 +231,8 @@ struct stream_info { spinlock_t pcm_lock; bool mmapped; unsigned int sg_index; /* current buf Index */ - unsigned char *cur_ptr; /* Current static bufs */ - struct snd_sst_buf_entry *buf_entry; + unsigned char __user *cur_ptr; /* Current static bufs */ + struct snd_sst_buf_entry __user *buf_entry; struct sst_block data_blk; /* stream ops block */ struct sst_block ctrl_blk; /* stream control cmd block */ enum snd_sst_buf_type buf_type; -- cgit v0.10.2 From eccbf04a904fc99c54ab37c29a2a4dedcec66e33 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 21 Oct 2010 07:46:58 +0200 Subject: Staging: bcm: use get_user() to access user pointers This fixes some places that dereference user pointers directly instead of using get_user(). Please especially check my changes to IOCTL_BCM_GET_CURRENT_STATUS. The original code modified the struct which "arg" was pointing to. I think this was a bug in the original code and that we only wanted to write to the OutputBuffer. Also with the original code you could read as much memory as you wanted so I had to put a cap on OutputLength. The only value of OutputLength that makes sense is sizeof(LINK_STATE) so now if OutputLength is not sizeof(LINK_STATE) it returns -EINVAL. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c index 77fdfe2..fead9c5 100644 --- a/drivers/staging/bcm/Bcmchar.c +++ b/drivers/staging/bcm/Bcmchar.c @@ -1001,13 +1001,15 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) } #endif case IOCTL_BE_BUCKET_SIZE: - Adapter->BEBucketSize = *(PULONG)arg; - Status = STATUS_SUCCESS; + Status = 0; + if (get_user(Adapter->BEBucketSize, (unsigned long __user *)arg)) + Status = -EFAULT; break; case IOCTL_RTPS_BUCKET_SIZE: - Adapter->rtPSBucketSize = *(PULONG)arg; - Status = STATUS_SUCCESS; + Status = 0; + if (get_user(Adapter->rtPSBucketSize, (unsigned long __user *)arg)) + Status = -EFAULT; break; case IOCTL_CHIP_RESET: { @@ -1028,11 +1030,15 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) case IOCTL_QOS_THRESHOLD: { USHORT uiLoopIndex; - for(uiLoopIndex = 0 ; uiLoopIndex < NO_OF_QUEUES ; uiLoopIndex++) - { - Adapter->PackInfo[uiLoopIndex].uiThreshold = *(PULONG)arg; + + Status = 0; + for (uiLoopIndex = 0; uiLoopIndex < NO_OF_QUEUES; uiLoopIndex++) { + if (get_user(Adapter->PackInfo[uiLoopIndex].uiThreshold, + (unsigned long __user *)arg)) { + Status = -EFAULT; + break; + } } - Status = STATUS_SUCCESS; break; } @@ -1093,7 +1099,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) } case IOCTL_BCM_GET_CURRENT_STATUS: { - LINK_STATE *plink_state = NULL; + LINK_STATE plink_state; + /* Copy Ioctl Buffer structure */ if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER))) { @@ -1101,13 +1108,19 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) Status = -EFAULT; break; } - plink_state = (LINK_STATE*)arg; - plink_state->bIdleMode = (UCHAR)Adapter->IdleMode; - plink_state->bShutdownMode = Adapter->bShutStatus; - plink_state->ucLinkStatus = (UCHAR)Adapter->LinkStatus; - if(copy_to_user(IoBuffer.OutputBuffer, - (PUCHAR)plink_state, (UINT)IoBuffer.OutputLength)) - { + if (IoBuffer.OutputLength != sizeof(plink_state)) { + Status = -EINVAL; + break; + } + + if (copy_from_user(&plink_state, (void __user *)arg, sizeof(plink_state))) { + Status = -EFAULT; + break; + } + plink_state.bIdleMode = (UCHAR)Adapter->IdleMode; + plink_state.bShutdownMode = Adapter->bShutStatus; + plink_state.ucLinkStatus = (UCHAR)Adapter->LinkStatus; + if (copy_to_user(IoBuffer.OutputBuffer, &plink_state, IoBuffer.OutputLength)) { BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Copy_to_user Failed..\n"); Status = -EFAULT; break; @@ -1331,7 +1344,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Copy From User space failed. status :%d", Status); return -EFAULT; } - uiSectorSize = *((PUINT)(IoBuffer.InputBuffer)); /* FIXME: unchecked __user access */ + if (get_user(uiSectorSize, (unsigned int __user *)IoBuffer.InputBuffer)) + return -EFAULT; + if((uiSectorSize < MIN_SECTOR_SIZE) || (uiSectorSize > MAX_SECTOR_SIZE)) { -- cgit v0.10.2 From 32a0fdf27c7d3742c179d84c512fb9a3432e235f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 23 Oct 2010 18:14:05 -0700 Subject: Staging: ath6kl: ATH6KL_CFG80211 depends on CFG80211 ATH6KL_CFG80211 should depend on CFG80211 to fix build errors: ERROR: "wiphy_free" [drivers/staging/ath6kl/ath6kl.ko] undefined! ERROR: "cfg80211_inform_bss_frame" [drivers/staging/ath6kl/ath6kl.ko] undefined! ERROR: "__ieee80211_get_channel" [drivers/staging/ath6kl/ath6kl.ko] undefined! ERROR: "cfg80211_get_bss" [drivers/staging/ath6kl/ath6kl.ko] undefined! ERROR: "wiphy_unregister" [drivers/staging/ath6kl/ath6kl.ko] undefined! ERROR: "cfg80211_connect_result" [drivers/staging/ath6kl/ath6kl.ko] undefined! ERROR: "cfg80211_michael_mic_failure" [drivers/staging/ath6kl/ath6kl.ko] undefined! ERROR: "cfg80211_ibss_joined" [drivers/staging/ath6kl/ath6kl.ko] undefined! ERROR: "cfg80211_roamed" [drivers/staging/ath6kl/ath6kl.ko] undefined! ERROR: "cfg80211_put_bss" [drivers/staging/ath6kl/ath6kl.ko] undefined! ERROR: "wiphy_new" [drivers/staging/ath6kl/ath6kl.ko] undefined! ERROR: "wiphy_register" [drivers/staging/ath6kl/ath6kl.ko] undefined! ERROR: "cfg80211_disconnected" [drivers/staging/ath6kl/ath6kl.ko] undefined! ERROR: "cfg80211_scan_done" [drivers/staging/ath6kl/ath6kl.ko] undefined! Signed-off-by: Randy Dunlap Cc: Vipin Mehta Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/ath6kl/Kconfig b/drivers/staging/ath6kl/Kconfig index ae2cdf4..8a5caa3 100644 --- a/drivers/staging/ath6kl/Kconfig +++ b/drivers/staging/ath6kl/Kconfig @@ -102,7 +102,7 @@ config AR600x_BT_RESET_PIN config ATH6KL_CFG80211 bool "CFG80211 support" - depends on ATH6K_LEGACY + depends on ATH6K_LEGACY && CFG80211 help Enables support for CFG80211 APIs. The default option is to use WEXT. Even with this option enabled, WEXT is not explicitly disabled and the onus of not exercising WEXT lies on the application(s) running in the user space. -- cgit v0.10.2 From 22b4dc5917a2644001e449b238ac18fb182b27fc Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 23 Oct 2010 19:54:49 +0200 Subject: Staging: ath6kl: Adapt API changes in cfg80211 The cfg80211 API changed in commit e31b82136d1adc7a599b6e99d3321e5831841f5a Signed-off-by: Hauke Mehrtens Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/ath6kl/os/linux/cfg80211.c b/drivers/staging/ath6kl/os/linux/cfg80211.c index c94ad29..7269d0a 100644 --- a/drivers/staging/ath6kl/os/linux/cfg80211.c +++ b/drivers/staging/ath6kl/os/linux/cfg80211.c @@ -808,7 +808,7 @@ ar6k_cfg80211_scanComplete_event(AR_SOFTC_T *ar, A_STATUS status) static int ar6k_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev, - A_UINT8 key_index, const A_UINT8 *mac_addr, + A_UINT8 key_index, bool pairwise, const A_UINT8 *mac_addr, struct key_params *params) { AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(ndev); @@ -901,7 +901,7 @@ ar6k_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev, static int ar6k_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev, - A_UINT8 key_index, const A_UINT8 *mac_addr) + A_UINT8 key_index, bool pairwise, const A_UINT8 *mac_addr) { AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(ndev); @@ -936,7 +936,8 @@ ar6k_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev, static int ar6k_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, - A_UINT8 key_index, const A_UINT8 *mac_addr, void *cookie, + A_UINT8 key_index, bool pairwise, const A_UINT8 *mac_addr, + void *cookie, void (*callback)(void *cookie, struct key_params*)) { AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(ndev); -- cgit v0.10.2 From 61241d97db02559bd83d21ffa783ab327945b925 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 26 Oct 2010 12:25:30 +0200 Subject: drivers/staging: delete double assignment Delete successive assignments to the same location. In three of the cases, the two assignments are identical. In the case of the file rt2860/common/cmm_aes.c, the assigned variable i is never used, so both assignments are dropped. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression i; @@ *i = ...; i = ...; // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c b/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c index 87a6487..20d5098 100644 --- a/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c +++ b/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c @@ -286,7 +286,6 @@ int ft1000_CreateDevice(struct ft1000_device *dev) pid = kernel_thread (exec_mknod, (void *)info, 0); // initialize application information - info->appcnt = 0; // if (ft1000_flarion_cnt == 0) { // diff --git a/drivers/staging/hv/hv_utils.c b/drivers/staging/hv/hv_utils.c index 702a478..a99e900 100644 --- a/drivers/staging/hv/hv_utils.c +++ b/drivers/staging/hv/hv_utils.c @@ -212,9 +212,6 @@ static void heartbeat_onchannelcallback(void *context) recvlen, requestid); icmsghdrp = (struct icmsg_hdr *)&buf[ - sizeof(struct vmbuspipe_hdr)]; - - icmsghdrp = (struct icmsg_hdr *)&buf[ sizeof(struct vmbuspipe_hdr)]; if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) { diff --git a/drivers/staging/rt2860/common/cmm_aes.c b/drivers/staging/rt2860/common/cmm_aes.c index 1d159ff..a99879b 100644 --- a/drivers/staging/rt2860/common/cmm_aes.c +++ b/drivers/staging/rt2860/common/cmm_aes.c @@ -330,8 +330,6 @@ void construct_mic_iv(unsigned char *mic_iv, for (i = 8; i < 14; i++) mic_iv[i] = pn_vector[13 - i]; /* mic_iv[8:13] = PN[5:0] */ #endif - i = (payload_length / 256); - i = (payload_length % 256); mic_iv[14] = (unsigned char)(payload_length / 256); mic_iv[15] = (unsigned char)(payload_length % 256); diff --git a/drivers/staging/westbridge/astoria/api/src/cyasusb.c b/drivers/staging/westbridge/astoria/api/src/cyasusb.c index 5a21970..7777d9a 100644 --- a/drivers/staging/westbridge/astoria/api/src/cyasusb.c +++ b/drivers/staging/westbridge/astoria/api/src/cyasusb.c @@ -1417,7 +1417,6 @@ cy_as_usb_set_enum_config(cy_as_device_handle handle, */ bus_mask = 0; media_mask = 0; - media_mask = 0; for (bus = 0; bus < CY_AS_MAX_BUSES; bus++) { for (device = 0; device < CY_AS_MAX_STORAGE_DEVICES; device++) { if (config_p->devices_to_enumerate[bus][device] == -- cgit v0.10.2 From 4fd68ae1a558043a2cc4ea2faf7235e71c3241aa Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 26 Oct 2010 12:25:33 +0200 Subject: drivers/staging/brcm80211/brcmfmac/dhd_linux.c: delete double assignment Delete successive assignments to the same location. dhd_ops_virt contains a subset of the definitions of dhd_ops_pri. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression i; @@ *i = ...; i = ...; // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_linux.c b/drivers/staging/brcm80211/brcmfmac/dhd_linux.c index bbbe7c5..9335f02 100644 --- a/drivers/staging/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/staging/brcm80211/brcmfmac/dhd_linux.c @@ -2222,8 +2222,6 @@ int dhd_net_attach(dhd_pub_t *dhdp, int ifidx) ASSERT(net); ASSERT(!net->netdev_ops); - net->netdev_ops = &dhd_ops_virt; - net->netdev_ops = &dhd_ops_pri; /* -- cgit v0.10.2 From 0d58fef68c2f34c06b3f205acd5e895f82e26812 Mon Sep 17 00:00:00 2001 From: Brett Rudley Date: Tue, 26 Oct 2010 10:05:14 -0700 Subject: staging: brcm80211: Maintainer change Nohee => Dowan Signed-off-by: Brett Rudley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/brcm80211/README b/drivers/staging/brcm80211/README index c3ba9bb..c8f1cf1 100644 --- a/drivers/staging/brcm80211/README +++ b/drivers/staging/brcm80211/README @@ -90,5 +90,5 @@ Contact Info: ============= Brett Rudley brudley@broadcom.com Henry Ptasinski henryp@broadcom.com -Nohee Ko noheek@broadcom.com +Dowan Kim dowan@broadcom.com diff --git a/drivers/staging/brcm80211/TODO b/drivers/staging/brcm80211/TODO index 8803d30..dbf9041 100644 --- a/drivers/staging/brcm80211/TODO +++ b/drivers/staging/brcm80211/TODO @@ -45,5 +45,5 @@ Contact ===== Brett Rudley Henry Ptasinski -Nohee Ko +Dowan Kim -- cgit v0.10.2 From 705059a670f3af2b37695e82de0ee58e75e656ed Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 28 Oct 2010 08:47:13 -0500 Subject: staging: rt2870: Add new USB ID for Belkin F6D4050 v1 Add new USB ID for FT2870 for Belkin F6D4050 v1 Signed-off-by: Larry Finger Reported- and Tested-by: James Long Cc: Stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c index ebf9074..ddacfc6 100644 --- a/drivers/staging/rt2860/usb_main_dev.c +++ b/drivers/staging/rt2860/usb_main_dev.c @@ -65,6 +65,7 @@ struct usb_device_id rtusb_usb_id[] = { {USB_DEVICE(0x14B2, 0x3C07)}, /* AL */ {USB_DEVICE(0x050D, 0x8053)}, /* Belkin */ {USB_DEVICE(0x050D, 0x825B)}, /* Belkin */ + {USB_DEVICE(0x050D, 0x935A)}, /* Belkin F6D4050 v1 */ {USB_DEVICE(0x050D, 0x935B)}, /* Belkin F6D4050 v2 */ {USB_DEVICE(0x14B2, 0x3C23)}, /* Airlink */ {USB_DEVICE(0x14B2, 0x3C27)}, /* Airlink */ -- cgit v0.10.2 From eacd121c3d0b74220aa6a91223e0adf7d5ec2497 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 29 Oct 2010 00:02:11 +0400 Subject: staging: vt6656: implement missing brackets Identation says that copy_to_user() should be called only iff wrq->u.essid.pointer is not zero. Also it is useless to call copy_to_user(0, ...). Signed-off-by: Vasiliy Kulikov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c index e992d5d..7cc3d24 100644 --- a/drivers/staging/vt6656/main_usb.c +++ b/drivers/staging/vt6656/main_usb.c @@ -1675,13 +1675,14 @@ static int device_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { { char essid[IW_ESSID_MAX_SIZE+1]; - if (wrq->u.essid.pointer) + if (wrq->u.essid.pointer) { rc = iwctl_giwessid(dev, NULL, &(wrq->u.essid), essid); if (copy_to_user(wrq->u.essid.pointer, essid, wrq->u.essid.length) ) rc = -EFAULT; + } } break; -- cgit v0.10.2 From 43f88d530ec656d9b556fb0d127b30757b1c3d35 Mon Sep 17 00:00:00 2001 From: Daniel Lichtenberger Date: Thu, 28 Oct 2010 23:20:12 +0200 Subject: Staging: rtl8192e: fix IOMMU memory leak Unmap the rx buffer before mapping the new one in rtl8192_rx. Failing to do so quickly exhausts the IOMMU memory during downloads: [...] DMA: Out of SW-IOMMU space for 9100 bytes at device ... Using "iommu=off mem=4g" also fixes the problem because then pci_map_single does not allocate memory. Tested on my personal laptop with a RTL8192E device. Without this patch the kernel quickly runs out of IOMMU memory (downloading 5 MB of data is sufficient to trigger it), with this patch applied I haven't experienced any issues so far. Signed-off-by: Daniel Lichtenberger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c index a202194..b1786dc 100644 --- a/drivers/staging/rtl8192e/r8192E_core.c +++ b/drivers/staging/rtl8192e/r8192E_core.c @@ -5829,6 +5829,9 @@ static void rtl8192_rx(struct net_device *dev) } } + pci_unmap_single(priv->pdev, *((dma_addr_t *) skb->cb), + priv->rxbuffersize, PCI_DMA_FROMDEVICE); + skb = new_skb; priv->rx_buf[priv->rx_idx] = skb; *((dma_addr_t *) skb->cb) = pci_map_single(priv->pdev, skb_tail_pointer(skb), priv->rxbuffersize, PCI_DMA_FROMDEVICE); -- cgit v0.10.2 From 31a9f47aa081292d1c750002724aa23b3bd44bb8 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 31 Oct 2010 15:33:55 -0700 Subject: Staging: udlfb.c: Fix k.alloc switched arguments Signed-off-by: Joe Perches Cc: Bernie Thompson Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c index 5969e84..fed2510 100644 --- a/drivers/staging/udlfb/udlfb.c +++ b/drivers/staging/udlfb/udlfb.c @@ -887,7 +887,7 @@ static int dlfb_ops_open(struct fb_info *info, int user) struct fb_deferred_io *fbdefio; - fbdefio = kmalloc(GFP_KERNEL, sizeof(struct fb_deferred_io)); + fbdefio = kmalloc(sizeof(struct fb_deferred_io), GFP_KERNEL); if (fbdefio) { fbdefio->delay = DL_DEFIO_WRITE_DELAY; -- cgit v0.10.2 From 65f8e441ed3c31c456aa70db1fbe50fb42079375 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 9 Nov 2010 10:48:25 +0000 Subject: tty: Fix formatting in tty.h Someone added a new ldisc number and messed up the tabbing. Fix it before anyone else copies it. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/tty.h b/include/linux/tty.h index 2a75474..c7ea9bc 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -50,7 +50,7 @@ #define N_V253 19 /* Codec control over voice modem */ #define N_CAIF 20 /* CAIF protocol for talking to modems */ #define N_GSM0710 21 /* GSM 0710 Mux */ -#define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */ +#define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */ /* * This character is the same as _POSIX_VDISABLE: it cannot be used as -- cgit v0.10.2 From dc98d9650891661a20842a8eef9e76536046d897 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Tue, 9 Nov 2010 14:10:38 -0800 Subject: tty: fix warning in synclink driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During builds I see the following warning - CC [M] drivers/char/pcmcia/synclink_cs.o drivers/char/pcmcia/synclink_cs.c:2194: warning: ‘mgslpc_get_icount’ defined but not used The function is a callback meant to be assigned to get_icount (added during 0587102cf). Fix accordingly. Signed-off-by: Andres Salomon Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index bfc10f8..eaa4199 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -2796,6 +2796,7 @@ static const struct tty_operations mgslpc_ops = { .hangup = mgslpc_hangup, .tiocmget = tiocmget, .tiocmset = tiocmset, + .get_icount = mgslpc_get_icount, .proc_fops = &mgslpc_proc_fops, }; -- cgit v0.10.2 From 68e29655cc51761d60d5f27b2738816a5b13e415 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 26 Oct 2010 15:56:34 +0100 Subject: nozomi: Fix warning from the previous TIOCGCOUNT changes Just remove a now unused variable Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index dd3f9b1..294d03e 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -1828,7 +1828,6 @@ static int ntty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { struct port *port = tty->driver_data; - void __user *argp = (void __user *)arg; int rval = -ENOIOCTLCMD; DBG1("******** IOCTL, cmd: %d", cmd); -- cgit v0.10.2 From c9bd9d01db02319c33767da5ee310ea37afda059 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 26 Oct 2010 14:20:48 -0400 Subject: 8250: add support for Kouwell KW-L221N-2 Add support for Kouwell KW-L221N-2 card. Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 53be4d3..2ada93e 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -2863,6 +2863,9 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0, pbn_b0_4_1152000 }, + { PCI_VENDOR_ID_OXSEMI, 0x9505, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, /* * The below card is a little controversial since it is the -- cgit v0.10.2 From e045fec48970df84647a47930fcf7a22ff7229c0 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 8 Nov 2010 19:01:47 +0100 Subject: tty: prevent DOS in the flush_to_ldisc There's a small window inside the flush_to_ldisc function, where the tty is unlocked and calling ldisc's receive_buf function. If in this window new buffer is added to the tty, the processing might never leave the flush_to_ldisc function. This scenario will hog the cpu, causing other tty processing starving, and making it impossible to interface the computer via tty. I was able to exploit this via pty interface by sending only control characters to the master input, causing the flush_to_ldisc to be scheduled, but never actually generate any output. To reproduce, please run multiple instances of following code. - SNIP #define _XOPEN_SOURCE #include #include #include #include #include int main(int argc, char **argv) { int i, slave, master = getpt(); char buf[8192]; sprintf(buf, "%s", ptsname(master)); grantpt(master); unlockpt(master); slave = open(buf, O_RDWR); if (slave < 0) { perror("open slave failed"); return 1; } for(i = 0; i < sizeof(buf); i++) buf[i] = rand() % 32; while(1) { write(master, buf, sizeof(buf)); } return 0; } - SNIP The attached patch (based on -next tree) fixes this by checking on the tty buffer tail. Once it's reached, the current work is rescheduled and another could run. Signed-off-by: Jiri Olsa Cc: stable Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index cc1e985..d8210ca 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -413,7 +413,8 @@ static void flush_to_ldisc(struct work_struct *work) spin_lock_irqsave(&tty->buf.lock, flags); if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) { - struct tty_buffer *head; + struct tty_buffer *head, *tail = tty->buf.tail; + int seen_tail = 0; while ((head = tty->buf.head) != NULL) { int count; char *char_buf; @@ -423,6 +424,15 @@ static void flush_to_ldisc(struct work_struct *work) if (!count) { if (head->next == NULL) break; + /* + There's a possibility tty might get new buffer + added during the unlock window below. We could + end up spinning in here forever hogging the CPU + completely. To avoid this let's have a rest each + time we processed the tail buffer. + */ + if (tail == head) + seen_tail = 1; tty->buf.head = head->next; tty_buffer_free(tty, head); continue; @@ -432,7 +442,7 @@ static void flush_to_ldisc(struct work_struct *work) line discipline as we want to empty the queue */ if (test_bit(TTY_FLUSHPENDING, &tty->flags)) break; - if (!tty->receive_room) { + if (!tty->receive_room || seen_tail) { schedule_delayed_work(&tty->buf.work, 1); break; } -- cgit v0.10.2 From a89f2466a9e5032514776b67926295b6296d702e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 7 Nov 2010 13:10:23 -0800 Subject: drivers/serial/bfin_5xx.c: Fix line continuation defects Signed-off-by: Joe Perches Acked-by: Sonic Zhang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index a9eff2b..351cc03 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -734,8 +734,7 @@ static int bfin_serial_startup(struct uart_port *port) IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_DISABLED, "BFIN_UART_CTS", uart)) { uart->cts_pin = -1; - pr_info("Unable to attach BlackFin UART CTS interrupt.\ - So, disable it.\n"); + pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n"); } } if (uart->rts_pin >= 0) { @@ -747,8 +746,7 @@ static int bfin_serial_startup(struct uart_port *port) if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int, IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) { - pr_info("Unable to attach BlackFin UART Modem \ - Status interrupt.\n"); + pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n"); } /* CTS RTS PINs are negative assertive. */ -- cgit v0.10.2 From ebf7c06635fbcf21a59e60187e166c5c23c57b06 Mon Sep 17 00:00:00 2001 From: Maciej Szmigiero Date: Tue, 26 Oct 2010 21:48:21 +0200 Subject: SERIAL: blacklist si3052 chip [SERIAL]blacklist si3052 chip Si3052-based softmodems aren't serial ports so don't bind serial driver to them. Allows proper driver to bind to them. Signed-off-by: Maciej Szmigiero Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 2ada93e..842e3b2 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -2285,6 +2285,8 @@ static struct pciserial_board pci_boards[] __devinitdata = { static const struct pci_device_id softmodem_blacklist[] = { { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ + { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */ + { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ }; /* -- cgit v0.10.2 From 100eeae2c5ce23b4db93ff320ee330ef1d740151 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sun, 31 Oct 2010 23:17:51 +0100 Subject: TTY: restore tty_ldisc_wait_idle It was removed in 65b770468e98 (tty-ldisc: turn ldisc user count into a proper refcount), but we need to wait for last user to quit the ldisc before we close it in tty_set_ldisc. Otherwise weird things start to happen. There might be processes waiting in tty_read->n_tty_read on tty->read_wait for input to appear and at that moment, a change of ldisc is fatal. n_tty_close is called, it frees read_buf and the waiting process is still in the middle of reading and goes nuts after it is woken. Previously we prevented close to happen when others are in ldisc ops by tty_ldisc_wait_idle in tty_set_ldisc. But the commit above removed that. So revoke the change and test whether there is 1 user (=we), and allow the close then. We can do that without ldisc/tty locks, because nobody else can open the device due to TTY_LDISC_CHANGING bit set, so we in fact wait for everybody to leave. I don't understand why tty_ldisc_lock would be needed either when the counter is an atomic variable, so this is a lockless tty_ldisc_wait_idle. On the other hand, if we fail to wait (timeout or signal), we have to reenable the halted ldiscs, so we take ldisc lock and reuse the setup path at the end of tty_set_ldisc. Signed-off-by: Jiri Slaby Acked-by: Linus Torvalds Tested-by: Sebastian Andrzej Siewior LKML-Reference: <20101031104136.GA511@Chamillionaire.breakpoint.cc> LKML-Reference: <1287669539-22644-1-git-send-email-jslaby@suse.cz> Cc: Alan Cox Cc: stable@kernel.org [32, 33, 36] Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 412f977..5bbf33a 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -47,6 +47,7 @@ static DEFINE_SPINLOCK(tty_ldisc_lock); static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait); +static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_idle); /* Line disc dispatch table */ static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS]; @@ -83,6 +84,7 @@ static void put_ldisc(struct tty_ldisc *ld) return; } local_irq_restore(flags); + wake_up(&tty_ldisc_idle); } /** @@ -531,6 +533,23 @@ static int tty_ldisc_halt(struct tty_struct *tty) } /** + * tty_ldisc_wait_idle - wait for the ldisc to become idle + * @tty: tty to wait for + * + * Wait for the line discipline to become idle. The discipline must + * have been halted for this to guarantee it remains idle. + */ +static int tty_ldisc_wait_idle(struct tty_struct *tty) +{ + int ret; + ret = wait_event_interruptible_timeout(tty_ldisc_idle, + atomic_read(&tty->ldisc->users) == 1, 5 * HZ); + if (ret < 0) + return ret; + return ret > 0 ? 0 : -EBUSY; +} + +/** * tty_set_ldisc - set line discipline * @tty: the terminal to set * @ldisc: the line discipline @@ -634,8 +653,17 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) flush_scheduled_work(); + retval = tty_ldisc_wait_idle(tty); + tty_lock(); mutex_lock(&tty->ldisc_mutex); + + /* handle wait idle failure locked */ + if (retval) { + tty_ldisc_put(new_ldisc); + goto enable; + } + if (test_bit(TTY_HUPPED, &tty->flags)) { /* We were raced by the hangup method. It will have stomped the ldisc data and closed the ldisc down */ @@ -669,6 +697,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty_ldisc_put(o_ldisc); +enable: /* * Allow ldisc referencing to occur again */ -- cgit v0.10.2 From 1c95ba1e1de7edffc0c4e275e147f1a9eb1f81ae Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Philippe=20R=C3=A9tornaz?= Date: Wed, 27 Oct 2010 17:13:21 +0200 Subject: tty_ldisc: Fix BUG() on hangup A kernel BUG when bluetooth rfcomm connection drop while the associated serial port is open is sometime triggered. It seems that the line discipline can disappear between the tty_ldisc_put and tty_ldisc_get. This patch fall back to the N_TTY line discipline if the previous discipline is not available anymore. Signed-off-by: Philippe Retornaz Acked-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 5bbf33a..d8e96b0 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -743,9 +743,12 @@ static void tty_reset_termios(struct tty_struct *tty) * state closed */ -static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc) +static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc) { - struct tty_ldisc *ld; + struct tty_ldisc *ld = tty_ldisc_get(ldisc); + + if (IS_ERR(ld)) + return -1; tty_ldisc_close(tty, tty->ldisc); tty_ldisc_put(tty->ldisc); @@ -753,10 +756,10 @@ static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc) /* * Switch the line discipline back */ - ld = tty_ldisc_get(ldisc); - BUG_ON(IS_ERR(ld)); tty_ldisc_assign(tty, ld); tty_set_termios_ldisc(tty, ldisc); + + return 0; } /** @@ -831,13 +834,16 @@ void tty_ldisc_hangup(struct tty_struct *tty) a FIXME */ if (tty->ldisc) { /* Not yet closed */ if (reset == 0) { - tty_ldisc_reinit(tty, tty->termios->c_line); - err = tty_ldisc_open(tty, tty->ldisc); + + if (!tty_ldisc_reinit(tty, tty->termios->c_line)) + err = tty_ldisc_open(tty, tty->ldisc); + else + err = 1; } /* If the re-open fails or we reset then go to N_TTY. The N_TTY open cannot fail */ if (reset || err) { - tty_ldisc_reinit(tty, N_TTY); + BUG_ON(tty_ldisc_reinit(tty, N_TTY)); WARN_ON(tty_ldisc_open(tty, tty->ldisc)); } tty_ldisc_enable(tty); -- cgit v0.10.2 From f581cf21b48c305c6fbbc3db5ef905deb19131e5 Mon Sep 17 00:00:00 2001 From: Chris Lang Date: Thu, 4 Nov 2010 23:02:29 +0100 Subject: Staging: batman-adv: fix interface alternating and bonding reggression 55d1666b521cbed95924c8d4775fe272c103f08c incidentally disabled bonding of packets first entering the mesh along with also disabling interface alternating regardless of where the packet came from. This re-enables these options. Signed-off-by: Chris Lang Signed-off-by: Marek Lindner Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/batman-adv/routing.c b/drivers/staging/batman-adv/routing.c index 9010263..657b69e 100644 --- a/drivers/staging/batman-adv/routing.c +++ b/drivers/staging/batman-adv/routing.c @@ -1000,10 +1000,10 @@ int recv_icmp_packet(struct sk_buff *skb, struct batman_if *recv_if) /* find a suitable router for this originator, and use * bonding if possible. */ -struct neigh_node *find_router(struct orig_node *orig_node, +struct neigh_node *find_router(struct bat_priv *bat_priv, + struct orig_node *orig_node, struct batman_if *recv_if) { - struct bat_priv *bat_priv; struct orig_node *primary_orig_node; struct orig_node *router_orig; struct neigh_node *router, *first_candidate, *best_router; @@ -1019,13 +1019,9 @@ struct neigh_node *find_router(struct orig_node *orig_node, /* without bonding, the first node should * always choose the default router. */ - if (!recv_if) - return orig_node->router; - - bat_priv = netdev_priv(recv_if->soft_iface); bonding_enabled = atomic_read(&bat_priv->bonding_enabled); - if (!bonding_enabled) + if ((!recv_if) && (!bonding_enabled)) return orig_node->router; router_orig = orig_node->router->orig_node; @@ -1154,7 +1150,7 @@ static int route_unicast_packet(struct sk_buff *skb, orig_node = ((struct orig_node *) hash_find(bat_priv->orig_hash, unicast_packet->dest)); - router = find_router(orig_node, recv_if); + router = find_router(bat_priv, orig_node, recv_if); if (!router) { spin_unlock_irqrestore(&bat_priv->orig_hash_lock, flags); diff --git a/drivers/staging/batman-adv/routing.h b/drivers/staging/batman-adv/routing.h index 06ea99d..92674c8 100644 --- a/drivers/staging/batman-adv/routing.h +++ b/drivers/staging/batman-adv/routing.h @@ -38,8 +38,8 @@ int recv_ucast_frag_packet(struct sk_buff *skb, struct batman_if *recv_if); int recv_bcast_packet(struct sk_buff *skb, struct batman_if *recv_if); int recv_vis_packet(struct sk_buff *skb, struct batman_if *recv_if); int recv_bat_packet(struct sk_buff *skb, struct batman_if *recv_if); -struct neigh_node *find_router(struct orig_node *orig_node, - struct batman_if *recv_if); +struct neigh_node *find_router(struct bat_priv *bat_priv, + struct orig_node *orig_node, struct batman_if *recv_if); void update_bonding_candidates(struct bat_priv *bat_priv, struct orig_node *orig_node); diff --git a/drivers/staging/batman-adv/unicast.c b/drivers/staging/batman-adv/unicast.c index 0dac50d..0459413 100644 --- a/drivers/staging/batman-adv/unicast.c +++ b/drivers/staging/batman-adv/unicast.c @@ -224,7 +224,7 @@ int unicast_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv) if (!orig_node) orig_node = transtable_search(bat_priv, ethhdr->h_dest); - router = find_router(orig_node, NULL); + router = find_router(bat_priv, orig_node, NULL); if (!router) goto unlock; -- cgit v0.10.2 From 4d774a7fed886522f55119ef524cbe3c90bbdc38 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Thu, 4 Nov 2010 23:02:30 +0100 Subject: Staging: batman-adv: suppress false warning when changing the mac address Whenever the mac address of an batman interface is changed check_known_mac_addr() is called to print a warning if the newly added mac address exists an another batman interface. While looping through the batman interface list check_known_mac_addr() only compares mac addresses and does not make sure they belong to different interfaces, thus always printing a warning. Signed-off-by: Marek Lindner Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/batman-adv/hard-interface.c b/drivers/staging/batman-adv/hard-interface.c index 80cfa86..b68a7e5 100644 --- a/drivers/staging/batman-adv/hard-interface.c +++ b/drivers/staging/batman-adv/hard-interface.c @@ -165,7 +165,7 @@ static void update_mac_addresses(struct batman_if *batman_if) batman_if->net_dev->dev_addr, ETH_ALEN); } -static void check_known_mac_addr(uint8_t *addr) +static void check_known_mac_addr(struct net_device *net_dev) { struct batman_if *batman_if; @@ -175,11 +175,16 @@ static void check_known_mac_addr(uint8_t *addr) (batman_if->if_status != IF_TO_BE_ACTIVATED)) continue; - if (!compare_orig(batman_if->net_dev->dev_addr, addr)) + if (batman_if->net_dev == net_dev) + continue; + + if (!compare_orig(batman_if->net_dev->dev_addr, + net_dev->dev_addr)) continue; pr_warning("The newly added mac address (%pM) already exists " - "on: %s\n", addr, batman_if->net_dev->name); + "on: %s\n", net_dev->dev_addr, + batman_if->net_dev->name); pr_warning("It is strongly recommended to keep mac addresses " "unique to avoid problems!\n"); } @@ -430,7 +435,7 @@ static struct batman_if *hardif_add_interface(struct net_device *net_dev) atomic_set(&batman_if->refcnt, 0); hardif_hold(batman_if); - check_known_mac_addr(batman_if->net_dev->dev_addr); + check_known_mac_addr(batman_if->net_dev); spin_lock(&if_list_lock); list_add_tail_rcu(&batman_if->list, &if_list); @@ -515,7 +520,7 @@ static int hard_if_event(struct notifier_block *this, goto out; } - check_known_mac_addr(batman_if->net_dev->dev_addr); + check_known_mac_addr(batman_if->net_dev); update_mac_addresses(batman_if); bat_priv = netdev_priv(batman_if->soft_iface); -- cgit v0.10.2 From 5f2e87738627d6c0faa50d9f401da0b1571e439c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 7 Nov 2010 17:19:39 +0000 Subject: Staging: ath6kl: Fix pointer casts on 64-bit architectures Remove unnecessary cast of firmware base address to integer before adding an offset. Fix direct use of sk_buff::network_header which is an offset rather than a pointer on 64-bit architectures. Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/ath6kl/os/linux/ar6000_drv.c b/drivers/staging/ath6kl/os/linux/ar6000_drv.c index c5a6d6c..a659f70 100644 --- a/drivers/staging/ath6kl/os/linux/ar6000_drv.c +++ b/drivers/staging/ath6kl/os/linux/ar6000_drv.c @@ -1126,7 +1126,7 @@ ar6000_transfer_bin_file(AR_SOFTC_T *ar, AR6K_BIN_FILE file, A_UINT32 address, A if ((board_ext_address) && (fw_entry->size == (board_data_size + board_ext_data_size))) { A_UINT32 param; - status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (A_UCHAR *)(((A_UINT32)fw_entry->data) + board_data_size), board_ext_data_size); + status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (A_UCHAR *)(fw_entry->data + board_data_size), board_ext_data_size); if (status != A_OK) { AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__)); @@ -3030,7 +3030,8 @@ ar6000_data_tx(struct sk_buff *skb, struct net_device *dev) A_UINT8 csumDest=0; A_UINT8 csum=skb->ip_summed; if(csumOffload && (csum==CHECKSUM_PARTIAL)){ - csumStart=skb->csum_start-(skb->network_header-skb->head)+sizeof(ATH_LLC_SNAP_HDR); + csumStart = (skb->head + skb->csum_start - skb_network_header(skb) + + sizeof(ATH_LLC_SNAP_HDR)); csumDest=skb->csum_offset+csumStart; } #endif -- cgit v0.10.2 From 34a488c1e0eabcea65e846d934fa51860fe66248 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 7 Nov 2010 17:22:41 +0000 Subject: Staging: Update parameters for cfg80211 key management operation Commit e31b82136d1adc7a599b6e99d3321e5831841f5a ("cfg80211/mac80211: allow per-station GTKs") changed the signatures of these operations but did not update the staging drivers. Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c index 3f29488..ea08252 100644 --- a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c @@ -95,12 +95,12 @@ static s32 wl_cfg80211_config_default_key(struct wiphy *wiphy, struct net_device *dev, u8 key_idx); static s32 wl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *dev, - u8 key_idx, const u8 *mac_addr, + u8 key_idx, bool pairwise, const u8 *mac_addr, struct key_params *params); static s32 wl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *dev, - u8 key_idx, const u8 *mac_addr); + u8 key_idx, bool pairwise, const u8 *mac_addr); static s32 wl_cfg80211_get_key(struct wiphy *wiphy, struct net_device *dev, - u8 key_idx, const u8 *mac_addr, + u8 key_idx, bool pairwise, const u8 *mac_addr, void *cookie, void (*callback) (void *cookie, struct key_params * @@ -1615,7 +1615,7 @@ wl_add_keyext(struct wiphy *wiphy, struct net_device *dev, static s32 wl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *dev, - u8 key_idx, const u8 *mac_addr, + u8 key_idx, bool pairwise, const u8 *mac_addr, struct key_params *params) { struct wl_wsec_key key; @@ -1700,7 +1700,7 @@ wl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *dev, static s32 wl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *dev, - u8 key_idx, const u8 *mac_addr) + u8 key_idx, bool pairwise, const u8 *mac_addr) { struct wl_wsec_key key; s32 err = 0; @@ -1756,7 +1756,7 @@ wl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *dev, static s32 wl_cfg80211_get_key(struct wiphy *wiphy, struct net_device *dev, - u8 key_idx, const u8 *mac_addr, void *cookie, + u8 key_idx, bool pairwise, const u8 *mac_addr, void *cookie, void (*callback) (void *cookie, struct key_params * params)) { struct key_params params; diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c index 4af83d5..6a71f52 100644 --- a/drivers/staging/wlan-ng/cfg80211.c +++ b/drivers/staging/wlan-ng/cfg80211.c @@ -139,7 +139,7 @@ exit: } int prism2_add_key(struct wiphy *wiphy, struct net_device *dev, - u8 key_index, const u8 *mac_addr, + u8 key_index, bool pairwise, const u8 *mac_addr, struct key_params *params) { wlandevice_t *wlandev = dev->ml_priv; @@ -198,7 +198,7 @@ exit: } int prism2_get_key(struct wiphy *wiphy, struct net_device *dev, - u8 key_index, const u8 *mac_addr, void *cookie, + u8 key_index, bool pairwise, const u8 *mac_addr, void *cookie, void (*callback)(void *cookie, struct key_params*)) { wlandevice_t *wlandev = dev->ml_priv; @@ -227,7 +227,7 @@ int prism2_get_key(struct wiphy *wiphy, struct net_device *dev, } int prism2_del_key(struct wiphy *wiphy, struct net_device *dev, - u8 key_index, const u8 *mac_addr) + u8 key_index, bool pairwise, const u8 *mac_addr) { wlandevice_t *wlandev = dev->ml_priv; u32 did; -- cgit v0.10.2 From c3444e50b211f0c7b680a115fe1485694493dc82 Mon Sep 17 00:00:00 2001 From: Maximiliano David Bustos Date: Mon, 8 Nov 2010 17:34:57 -0300 Subject: Staging: wlan-ng: Fix wrong #ifdef #endif sequence This patch fixes bug #13820 from bugzilla.kernel.org. Quote: "If ETHTOOL_GLINK is not defined, the end for switch case is not to be found." Signed-off-by: Maximiliano David Bustos Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c index aa1792c8..b7b4a73 100644 --- a/drivers/staging/wlan-ng/p80211netdev.c +++ b/drivers/staging/wlan-ng/p80211netdev.c @@ -522,8 +522,8 @@ static int p80211netdev_ethtool(wlandevice_t *wlandev, void __user *useraddr) if (copy_to_user(useraddr, &edata, sizeof(edata))) return -EFAULT; return 0; - } #endif + } return -EOPNOTSUPP; } -- cgit v0.10.2 From 2b66b50b12cabc05f05543e792d4c9c2465d5702 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Tue, 9 Nov 2010 11:50:05 +0100 Subject: drm/radeon/kms: Fix retrying ttm_bo_init() after it failed once. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If ttm_bo_init() returns failure, it already destroyed the BO, so we need to retry from scratch. Signed-off-by: Michel Dänzer Tested-by: Markus Trippelsdorf Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index d7ab914..8eb1834 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -102,6 +102,8 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj, type = ttm_bo_type_device; } *bo_ptr = NULL; + +retry: bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL); if (bo == NULL) return -ENOMEM; @@ -109,8 +111,6 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj, bo->gobj = gobj; bo->surface_reg = -1; INIT_LIST_HEAD(&bo->list); - -retry: radeon_ttm_placement_from_domain(bo, domain); /* Kernel allocation are uninterruptible */ mutex_lock(&rdev->vram_mutex); -- cgit v0.10.2 From 7dfbbdcffebc41441e64278961f57d2840a76259 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Tue, 9 Nov 2010 21:31:44 +0100 Subject: drm/ttm: Be consistent on ttm_bo_init() failures Call destroy() on _all_ ttm_bo_init() failures, and make sure that behavior is documented in the function description. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index ce46457..3ca77dc 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -1144,6 +1144,10 @@ int ttm_bo_init(struct ttm_bo_device *bdev, num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; if (num_pages == 0) { printk(KERN_ERR TTM_PFX "Illegal buffer object size.\n"); + if (destroy) + (*destroy)(bo); + else + kfree(bo); return -EINVAL; } bo->destroy = destroy; diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h index 5afa5b5..beafc15 100644 --- a/include/drm/ttm/ttm_bo_api.h +++ b/include/drm/ttm/ttm_bo_api.h @@ -432,6 +432,10 @@ extern void ttm_bo_synccpu_write_release(struct ttm_buffer_object *bo); * together with the @destroy function, * enables driver-specific objects derived from a ttm_buffer_object. * On successful return, the object kref and list_kref are set to 1. + * If a failure occurs, the function will call the @destroy function, or + * kfree() if @destroy is NULL. Thus, after a failure, dereferencing @bo is + * illegal and will likely cause memory corruption. + * * Returns * -ENOMEM: Out of memory. * -EINVAL: Invalid placement flags. -- cgit v0.10.2 From a3da8e451321c31d88cebd12c234d0aac2a1cc35 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 6 Nov 2010 11:47:24 +0300 Subject: perf, ui: Eliminate stack-smashing protection compiler complaint MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The gcc complains about small auto-var strings being allocated from stack space. Make them const to avoid this: | CC util/ui/util.o | cc1: warnings being treated as errors | util/ui/util.c: In function ‘ui__dialog_yesno’: | util/ui/util.c:108: error: not protecting function: no buffer at least 8 bytes long | make: *** [util/ui/util.o] Error 1 The real bug is in the newtWinChoice() ABI - but that's an externality we cannot fix here, so we use this workaround. Signed-off-by: Cyrill Gorcunov Acked-by: Frédéric Weisbecker Cc: Arnaldo Carvalho de Melo LKML-Reference: <20101106084724.GA5956@lenovo> Signed-off-by: Ingo Molnar diff --git a/tools/perf/util/ui/util.c b/tools/perf/util/ui/util.c index 9706d9d..056c695 100644 --- a/tools/perf/util/ui/util.c +++ b/tools/perf/util/ui/util.c @@ -104,9 +104,10 @@ out_destroy_form: return rc; } +static const char yes[] = "Yes", no[] = "No"; + bool ui__dialog_yesno(const char *msg) { /* newtWinChoice should really be accepting const char pointers... */ - char yes[] = "Yes", no[] = "No"; - return newtWinChoice(NULL, yes, no, (char *)msg) == 1; + return newtWinChoice(NULL, (char *)yes, (char *)no, (char *)msg) == 1; } -- cgit v0.10.2 From 8e5e9521c13ff8cf6727999999c8d88cc64b5ff7 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Tue, 9 Nov 2010 00:08:11 +0100 Subject: x86: Remove unnecessary casts of void ptr returning alloc function return values The [vk][cmz]alloc(_node) family of functions return void pointers which it's completely unnecessary/pointless to cast to other pointer types since that happens implicitly. This patch removes such casts from arch/x86. Signed-off-by: Jesper Juhl Cc: trivial@kernel.org Cc: amd64-microcode@amd64.org Cc: Andreas Herrmann LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index e1af7c0..ce0cb47 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -212,7 +212,7 @@ static int install_equiv_cpu_table(const u8 *buf) return 0; } - equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size); + equiv_cpu_table = vmalloc(size); if (!equiv_cpu_table) { pr_err("failed to allocate equivalent CPU table\n"); return 0; diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index 20ea20a..a318194 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -1343,8 +1343,8 @@ uv_activation_descriptor_init(int node, int pnode) * each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR) * per cpu; and up to 32 (UV_ADP_SIZE) cpu's per uvhub */ - bau_desc = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)* - UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node); + bau_desc = kmalloc_node(sizeof(struct bau_desc) * UV_ADP_SIZE + * UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node); BUG_ON(!bau_desc); pa = uv_gpa(bau_desc); /* need the real nasid*/ @@ -1402,9 +1402,9 @@ uv_payload_queue_init(int node, int pnode) struct bau_payload_queue_entry *pqp_malloc; struct bau_control *bcp; - pqp = (struct bau_payload_queue_entry *) kmalloc_node( - (DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry), - GFP_KERNEL, node); + pqp = kmalloc_node((DEST_Q_SIZE + 1) + * sizeof(struct bau_payload_queue_entry), + GFP_KERNEL, node); BUG_ON(!pqp); pqp_malloc = pqp; @@ -1520,8 +1520,7 @@ static void __init uv_init_per_cpu(int nuvhubs) timeout_us = calculate_destination_timeout(); - uvhub_descs = (struct uvhub_desc *) - kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL); + uvhub_descs = kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL); memset(uvhub_descs, 0, nuvhubs * sizeof(struct uvhub_desc)); uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL); for_each_present_cpu(cpu) { -- cgit v0.10.2 From 01797c599816d39dfea47864c0f90cd50845811f Mon Sep 17 00:00:00 2001 From: Corey Ashford Date: Mon, 8 Nov 2010 18:20:45 -0800 Subject: perf: Fix usages of profile_cpu in builtin-top.c to use cpu_list profile_cpu was left over from an earlier implementation that supported running perf top on a single CPU. profile_cpu was no longer set by any switch and usages of it resulted in dead code. Instead, convert the code to use cpu_list, which is set by the -C option. Also improved the printing of nr_cpus and cpu_list by correcting the plurals. Signed-off-by: Corey Ashford Cc: a.p.zijlstra@chello.nl Cc: acme@redhat.com LKML-Reference: <1289269245-9388-1-git-send-email-cjashfor@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index b513e40..dd62580 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -69,7 +69,6 @@ static int target_tid = -1; static pid_t *all_tids = NULL; static int thread_num = 0; static bool inherit = false; -static int profile_cpu = -1; static int nr_cpus = 0; static int realtime_prio = 0; static bool group = false; @@ -558,13 +557,13 @@ static void print_sym_table(void) else printf(" (all"); - if (profile_cpu != -1) - printf(", cpu: %d)\n", profile_cpu); + if (cpu_list) + printf(", CPU%s: %s)\n", nr_cpus > 1 ? "s" : "", cpu_list); else { if (target_tid != -1) printf(")\n"); else - printf(", %d CPUs)\n", nr_cpus); + printf(", %d CPU%s)\n", nr_cpus, nr_cpus > 1 ? "s" : ""); } printf("%-*.*s\n", win_width, win_width, graph_dotted_line); @@ -1187,11 +1186,10 @@ int group_fd; static void start_counter(int i, int counter) { struct perf_event_attr *attr; - int cpu; + int cpu = -1; int thread_index; - cpu = profile_cpu; - if (target_tid == -1 && profile_cpu == -1) + if (target_tid == -1) cpu = cpumap[i]; attr = attrs + counter; -- cgit v0.10.2 From ed10b490ea6498f76284043565d42ca3649ccca1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 10 Nov 2010 18:02:25 +0900 Subject: sh: clkfwk: fix up compiler warnings. CC drivers/sh/clk/core.o drivers/sh/clk/core.c: In function 'clk_round_parent': drivers/sh/clk/core.c:574: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'unsigned int' drivers/sh/clk/core.c:594: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'unsigned int' Signed-off-by: Paul Mundt diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index 09615b5..cb12a8e 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -571,7 +571,7 @@ long clk_round_parent(struct clk *clk, unsigned long target, *best_freq = freq_max; } - pr_debug("too low freq %lu, error %lu\n", freq->frequency, + pr_debug("too low freq %u, error %lu\n", freq->frequency, target - freq_max); if (!error) @@ -591,7 +591,7 @@ long clk_round_parent(struct clk *clk, unsigned long target, *best_freq = freq_min; } - pr_debug("too high freq %lu, error %lu\n", freq->frequency, + pr_debug("too high freq %u, error %lu\n", freq->frequency, freq_min - target); if (!error) -- cgit v0.10.2 From 25591b07033663e09f5e60355fc5ec4d4aa53e63 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 10 Nov 2010 10:05:51 +0100 Subject: [S390] fix get_user_pages_fast The check for the _PAGE_RO bit in get_user_pages_fast for write==1 is the wrong way around. It must not be set for the fast path. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c index 38e641c..45b405c 100644 --- a/arch/s390/mm/gup.c +++ b/arch/s390/mm/gup.c @@ -20,18 +20,17 @@ static inline int gup_pte_range(pmd_t *pmdp, pmd_t pmd, unsigned long addr, unsigned long end, int write, struct page **pages, int *nr) { - unsigned long mask, result; + unsigned long mask; pte_t *ptep, pte; struct page *page; - result = write ? 0 : _PAGE_RO; - mask = result | _PAGE_INVALID | _PAGE_SPECIAL; + mask = (write ? _PAGE_RO : 0) | _PAGE_INVALID | _PAGE_SPECIAL; ptep = ((pte_t *) pmd_deref(pmd)) + pte_index(addr); do { pte = *ptep; barrier(); - if ((pte_val(pte) & mask) != result) + if ((pte_val(pte) & mask) != 0) return 0; VM_BUG_ON(!pfn_valid(pte_pfn(pte))); page = pte_page(pte); -- cgit v0.10.2 From 3b210e7652a0ac638b1a267b6a181c8f742d8462 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 10 Nov 2010 10:05:52 +0100 Subject: [S390] tape: add medium state notifications Add uevent notifications for tape cartridge load and tape cartridge unload events. Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c index 6c40867..b3a3e8e 100644 --- a/drivers/s390/char/tape_core.c +++ b/drivers/s390/char/tape_core.c @@ -209,29 +209,79 @@ tape_state_set(struct tape_device *device, enum tape_state newstate) wake_up(&device->state_change_wq); } +struct tape_med_state_work_data { + struct tape_device *device; + enum tape_medium_state state; + struct work_struct work; +}; + +static void +tape_med_state_work_handler(struct work_struct *work) +{ + static char env_state_loaded[] = "MEDIUM_STATE=LOADED"; + static char env_state_unloaded[] = "MEDIUM_STATE=UNLOADED"; + struct tape_med_state_work_data *p = + container_of(work, struct tape_med_state_work_data, work); + struct tape_device *device = p->device; + char *envp[] = { NULL, NULL }; + + switch (p->state) { + case MS_UNLOADED: + pr_info("%s: The tape cartridge has been successfully " + "unloaded\n", dev_name(&device->cdev->dev)); + envp[0] = env_state_unloaded; + kobject_uevent_env(&device->cdev->dev.kobj, KOBJ_CHANGE, envp); + break; + case MS_LOADED: + pr_info("%s: A tape cartridge has been mounted\n", + dev_name(&device->cdev->dev)); + envp[0] = env_state_loaded; + kobject_uevent_env(&device->cdev->dev.kobj, KOBJ_CHANGE, envp); + break; + default: + break; + } + tape_put_device(device); + kfree(p); +} + +static void +tape_med_state_work(struct tape_device *device, enum tape_medium_state state) +{ + struct tape_med_state_work_data *p; + + p = kzalloc(sizeof(*p), GFP_ATOMIC); + if (p) { + INIT_WORK(&p->work, tape_med_state_work_handler); + p->device = tape_get_device(device); + p->state = state; + schedule_work(&p->work); + } +} + void tape_med_state_set(struct tape_device *device, enum tape_medium_state newstate) { - if (device->medium_state == newstate) + enum tape_medium_state oldstate; + + oldstate = device->medium_state; + if (oldstate == newstate) return; + device->medium_state = newstate; switch(newstate){ case MS_UNLOADED: device->tape_generic_status |= GMT_DR_OPEN(~0); - if (device->medium_state == MS_LOADED) - pr_info("%s: The tape cartridge has been successfully " - "unloaded\n", dev_name(&device->cdev->dev)); + if (oldstate == MS_LOADED) + tape_med_state_work(device, MS_UNLOADED); break; case MS_LOADED: device->tape_generic_status &= ~GMT_DR_OPEN(~0); - if (device->medium_state == MS_UNLOADED) - pr_info("%s: A tape cartridge has been mounted\n", - dev_name(&device->cdev->dev)); + if (oldstate == MS_UNLOADED) + tape_med_state_work(device, MS_LOADED); break; default: - // print nothing break; } - device->medium_state = newstate; wake_up(&device->state_change_wq); } -- cgit v0.10.2 From 16d2ce271c6b8b3527ed1461d03b5f373d53f78f Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 10 Nov 2010 10:05:53 +0100 Subject: [S390] cio: fix incorrect ccw_device_init_count If device recognition is interrupted by a subchannel event indicating that the device is gone, ccw_device_init_count is not correctly decreased. Fix this by reporting the corresponding event to the device recognition callback via the state machine. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 2ff8a22..e8391b8 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1455,7 +1455,16 @@ static int io_subchannel_sch_event(struct subchannel *sch, int process) break; case IO_SCH_UNREG_ATTACH: case IO_SCH_UNREG: - if (cdev) + if (!cdev) + break; + if (cdev->private->state == DEV_STATE_SENSE_ID) { + /* + * Note: delayed work triggered by this event + * and repeated calls to sch_event are synchronized + * by the above check for work_pending(cdev). + */ + dev_fsm_event(cdev, DEV_EVENT_NOTOPER); + } else ccw_device_set_notoper(cdev); break; case IO_SCH_NOP: -- cgit v0.10.2 From ca768b663131ca644689fcadc9ca092dcc96a758 Mon Sep 17 00:00:00 2001 From: Stefan Weinhuber Date: Wed, 10 Nov 2010 10:05:54 +0100 Subject: [S390] vmlogrdr: purge after recording is switched off If automatic purge is enabled for a vmlogrdr device, old records are purged before an IUCV recording service is switched on or off. If z/VM generates a large number of records between purging and switching the recording service off, these records remain queued, and may have a negative performance impact on the z/VM system. To avoid this problem, we need to purge the records after recording is switched off. Signed-off-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c index 9f66142..1cc726b 100644 --- a/drivers/s390/char/vmlogrdr.c +++ b/drivers/s390/char/vmlogrdr.c @@ -249,27 +249,25 @@ static int vmlogrdr_recording(struct vmlogrdr_priv_t * logptr, char cp_command[80]; char cp_response[160]; char *onoff, *qid_string; + int rc; - memset(cp_command, 0x00, sizeof(cp_command)); - memset(cp_response, 0x00, sizeof(cp_response)); - - onoff = ((action == 1) ? "ON" : "OFF"); + onoff = ((action == 1) ? "ON" : "OFF"); qid_string = ((recording_class_AB == 1) ? " QID * " : ""); - /* + /* * The recording commands needs to be called with option QID * for guests that have previlege classes A or B. * Purging has to be done as separate step, because recording * can't be switched on as long as records are on the queue. * Doing both at the same time doesn't work. */ - - if (purge) { + if (purge && (action == 1)) { + memset(cp_command, 0x00, sizeof(cp_command)); + memset(cp_response, 0x00, sizeof(cp_response)); snprintf(cp_command, sizeof(cp_command), "RECORDING %s PURGE %s", logptr->recording_name, qid_string); - cpcmd(cp_command, cp_response, sizeof(cp_response), NULL); } @@ -279,19 +277,33 @@ static int vmlogrdr_recording(struct vmlogrdr_priv_t * logptr, logptr->recording_name, onoff, qid_string); - cpcmd(cp_command, cp_response, sizeof(cp_response), NULL); /* The recording command will usually answer with 'Command complete' * on success, but when the specific service was never connected * before then there might be an additional informational message * 'HCPCRC8072I Recording entry not found' before the - * 'Command complete'. So I use strstr rather then the strncmp. + * 'Command complete'. So I use strstr rather then the strncmp. */ if (strstr(cp_response,"Command complete")) - return 0; + rc = 0; else - return -EIO; + rc = -EIO; + /* + * If we turn recording off, we have to purge any remaining records + * afterwards, as a large number of queued records may impact z/VM + * performance. + */ + if (purge && (action == 0)) { + memset(cp_command, 0x00, sizeof(cp_command)); + memset(cp_response, 0x00, sizeof(cp_response)); + snprintf(cp_command, sizeof(cp_command), + "RECORDING %s PURGE %s", + logptr->recording_name, + qid_string); + cpcmd(cp_command, cp_response, sizeof(cp_response), NULL); + } + return rc; } -- cgit v0.10.2 From ec6743bb06510c7b629603ce35713d6ae9273579 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Wed, 10 Nov 2010 10:05:55 +0100 Subject: [S390] mm: add devmem_is_allowed() for STRICT_DEVMEM checking Provide the devmem_is_allowed() routine to restrict access to kernel memory from userspace. Set the CONFIG_STRICT_DEVMEM config option to switch on checking. Signed-off-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/Kconfig.debug b/arch/s390/Kconfig.debug index 45e0c61..05221b1 100644 --- a/arch/s390/Kconfig.debug +++ b/arch/s390/Kconfig.debug @@ -6,6 +6,18 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" +config STRICT_DEVMEM + def_bool y + prompt "Filter access to /dev/mem" + ---help--- + This option restricts access to /dev/mem. If this option is + disabled, you allow userspace access to all memory, including + kernel and userspace memory. Accidental memory access is likely + to be disastrous. + Memory access is required for experts who want to debug the kernel. + + If you are unsure, say Y. + config DEBUG_STRICT_USER_COPY_CHECKS bool "Strict user copy size checks" ---help--- diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h index a8729ea..3c987e9 100644 --- a/arch/s390/include/asm/page.h +++ b/arch/s390/include/asm/page.h @@ -130,6 +130,11 @@ struct page; void arch_free_page(struct page *page, int order); void arch_alloc_page(struct page *page, int order); +static inline int devmem_is_allowed(unsigned long pfn) +{ + return 0; +} + #define HAVE_ARCH_FREE_PAGE #define HAVE_ARCH_ALLOC_PAGE -- cgit v0.10.2 From becf91f18750cf1c60828aa2ee63a36b05c2e4d0 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 10 Nov 2010 10:05:56 +0100 Subject: [S390] ftrace: build without frame pointers on s390 s390 doesn't need FRAME_POINTERS in order to have a working function tracer. We don't need frame pointers in order to get strack traces since we always have valid backchains by using the -mkernel-backchain gcc option. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index e04b8bc..ea37e2f 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -126,7 +126,7 @@ if FTRACE config FUNCTION_TRACER bool "Kernel Function Tracer" depends on HAVE_FUNCTION_TRACER - select FRAME_POINTER if (!ARM_UNWIND) + select FRAME_POINTER if !ARM_UNWIND && !S390 select KALLSYMS select GENERIC_TRACER select CONTEXT_SWITCH_TRACER -- cgit v0.10.2 From adb45839817392102e659c19e5c19aa39530021f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 10 Nov 2010 10:05:57 +0100 Subject: [S390] kprobes: disable interrupts throughout Execute the kprobe exception and fault handler with interrupts disabled. To disable the interrupts only while a single step is in progress is not good enough, a kprobe from interrupt context while another kprobe is handled can confuse the internal house keeping. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index d60fc43..70cf73b 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -30,6 +30,7 @@ #include #include #include +#include DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); @@ -212,7 +213,7 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) /* Set the PER control regs, turns on single step for this address */ __ctl_load(kprobe_per_regs, 9, 11); regs->psw.mask |= PSW_MASK_PER; - regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK); + regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT); } static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) @@ -239,7 +240,7 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, __get_cpu_var(current_kprobe) = p; /* Save the interrupt and per flags */ kcb->kprobe_saved_imask = regs->psw.mask & - (PSW_MASK_PER | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK); + (PSW_MASK_PER | PSW_MASK_IO | PSW_MASK_EXT); /* Save the control regs that govern PER */ __ctl_store(kcb->kprobe_saved_ctl, 9, 11); } @@ -316,8 +317,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) return 1; ss_probe: - if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO)) - local_irq_disable(); prepare_singlestep(p, regs); kcb->kprobe_status = KPROBE_HIT_SS; return 1; @@ -465,8 +464,6 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs) goto out; } reset_current_kprobe(); - if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO)) - local_irq_enable(); out: preempt_enable_no_resched(); @@ -482,7 +479,7 @@ out: return 1; } -int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) +static int __kprobes kprobe_trap_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); @@ -508,8 +505,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) restore_previous_kprobe(kcb); else { reset_current_kprobe(); - if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO)) - local_irq_enable(); } preempt_enable_no_resched(); break; @@ -553,6 +548,18 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) return 0; } +int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) +{ + int ret; + + if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT)) + local_irq_disable(); + ret = kprobe_trap_handler(regs, trapnr); + if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT)) + local_irq_restore(regs->psw.mask & ~PSW_MASK_PER); + return ret; +} + /* * Wrapper routine to for handling exceptions. */ @@ -560,8 +567,12 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + struct pt_regs *regs = args->regs; int ret = NOTIFY_DONE; + if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT)) + local_irq_disable(); + switch (val) { case DIE_BPT: if (kprobe_handler(args->regs)) @@ -572,16 +583,17 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, ret = NOTIFY_STOP; break; case DIE_TRAP: - /* kprobe_running() needs smp_processor_id() */ - preempt_disable(); - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) + if (!preemptible() && kprobe_running() && + kprobe_trap_handler(args->regs, args->trapnr)) ret = NOTIFY_STOP; - preempt_enable(); break; default: break; } + + if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT)) + local_irq_restore(regs->psw.mask & ~PSW_MASK_PER); + return ret; } @@ -595,6 +607,7 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) /* setup return addr to the jprobe handler routine */ regs->psw.addr = (unsigned long)(jp->entry) | PSW_ADDR_AMODE; + regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT); /* r14 is the function return address */ kcb->jprobe_saved_r14 = (unsigned long)regs->gprs[14]; -- cgit v0.10.2 From 89480801a17a3069f45169d40b828c8e511aa005 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 10 Nov 2010 10:05:58 +0100 Subject: [S390] kprobes: Fix the return address of multiple kretprobes Analog to git commit 737480a0d525dae13306296da08029dff545bc72 fix the return address of subsequent kretprobes when multiple kretprobes are set on the same function. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index 70cf73b..2564793 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -349,6 +349,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p, struct hlist_node *node, *tmp; unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline; + kprobe_opcode_t *correct_ret_addr = NULL; INIT_HLIST_HEAD(&empty_rp); kretprobe_hash_lock(current, &head, &flags); @@ -371,10 +372,32 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p, /* another task is sharing our hash bucket */ continue; - if (ri->rp && ri->rp->handler) - ri->rp->handler(ri, regs); + orig_ret_address = (unsigned long)ri->ret_addr; + + if (orig_ret_address != trampoline_address) + /* + * This is the real return address. Any other + * instances associated with this task are for + * other calls deeper on the call stack + */ + break; + } + + kretprobe_assert(ri, orig_ret_address, trampoline_address); + + correct_ret_addr = ri->ret_addr; + hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { + if (ri->task != current) + /* another task is sharing our hash bucket */ + continue; orig_ret_address = (unsigned long)ri->ret_addr; + + if (ri->rp && ri->rp->handler) { + ri->ret_addr = correct_ret_addr; + ri->rp->handler(ri, regs); + } + recycle_rp_inst(ri, &empty_rp); if (orig_ret_address != trampoline_address) { @@ -386,7 +409,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p, break; } } - kretprobe_assert(ri, orig_ret_address, trampoline_address); + regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE; reset_current_kprobe(); -- cgit v0.10.2 From 62b0cfc240b1d4601333912ef8760e0ca9ec2cec Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Sat, 6 Nov 2010 15:41:04 -0500 Subject: x86, UV: Update node controller MMRs A new version of the SGI UV hub node controller is being developed. A few of the MMRs (control registers) that exist on the current hub no longer exist on the new hub. Fortunately, there are alternate MMRs that are are functionally equivalent and that exist on both hubs. This patch changes the UV code to use MMRs that exist in BOTH versions of the hub node controller. Signed-off-by: Jack Steiner LKML-Reference: <20101106204056.GA27584@sgi.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index b2f2d2e..6d90adf 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -806,6 +806,78 @@ union uvh_node_present_table_u { }; /* ========================================================================= */ +/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x16000c8UL + +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_SHFT 24 +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_MASK 0x00000000ff000000UL +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_SHFT 48 +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_MASK 0x001f000000000000UL +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_SHFT 63 +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_MASK 0x8000000000000000UL + +union uvh_rh_gam_alias210_overlay_config_0_mmr_u { + unsigned long v; + struct uvh_rh_gam_alias210_overlay_config_0_mmr_s { + unsigned long rsvd_0_23: 24; /* */ + unsigned long base : 8; /* RW */ + unsigned long rsvd_32_47: 16; /* */ + unsigned long m_alias : 5; /* RW */ + unsigned long rsvd_53_62: 10; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x16000d8UL + +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_SHFT 24 +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_MASK 0x00000000ff000000UL +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_SHFT 48 +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_MASK 0x001f000000000000UL +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_SHFT 63 +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_MASK 0x8000000000000000UL + +union uvh_rh_gam_alias210_overlay_config_1_mmr_u { + unsigned long v; + struct uvh_rh_gam_alias210_overlay_config_1_mmr_s { + unsigned long rsvd_0_23: 24; /* */ + unsigned long base : 8; /* RW */ + unsigned long rsvd_32_47: 16; /* */ + unsigned long m_alias : 5; /* RW */ + unsigned long rsvd_53_62: 10; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x16000e8UL + +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_SHFT 24 +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_MASK 0x00000000ff000000UL +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_SHFT 48 +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_MASK 0x001f000000000000UL +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_SHFT 63 +#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_MASK 0x8000000000000000UL + +union uvh_rh_gam_alias210_overlay_config_2_mmr_u { + unsigned long v; + struct uvh_rh_gam_alias210_overlay_config_2_mmr_s { + unsigned long rsvd_0_23: 24; /* */ + unsigned long base : 8; /* RW */ + unsigned long rsvd_32_47: 16; /* */ + unsigned long m_alias : 5; /* RW */ + unsigned long rsvd_53_62: 10; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + +/* ========================================================================= */ /* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR */ /* ========================================================================= */ #define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL @@ -857,6 +929,29 @@ union uvh_rh_gam_alias210_redirect_config_2_mmr_u { }; /* ========================================================================= */ +/* UVH_RH_GAM_CONFIG_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_CONFIG_MMR 0x1600000UL + +#define UVH_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0 +#define UVH_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL +#define UVH_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6 +#define UVH_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL +#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_SHFT 12 +#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_MASK 0x0000000000001000UL + +union uvh_rh_gam_config_mmr_u { + unsigned long v; + struct uvh_rh_gam_config_mmr_s { + unsigned long m_skt : 6; /* RW */ + unsigned long n_skt : 4; /* RW */ + unsigned long rsvd_10_11: 2; /* */ + unsigned long mmiol_cfg : 1; /* RW */ + unsigned long rsvd_13_63: 51; /* */ + } s; +}; + +/* ========================================================================= */ /* UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR */ /* ========================================================================= */ #define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL @@ -987,97 +1082,5 @@ union uvh_rtc1_int_config_u { } s; }; -/* ========================================================================= */ -/* UVH_SI_ADDR_MAP_CONFIG */ -/* ========================================================================= */ -#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL - -#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0 -#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL -#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8 -#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL - -union uvh_si_addr_map_config_u { - unsigned long v; - struct uvh_si_addr_map_config_s { - unsigned long m_skt : 6; /* RW */ - unsigned long rsvd_6_7: 2; /* */ - unsigned long n_skt : 4; /* RW */ - unsigned long rsvd_12_63: 52; /* */ - } s; -}; - -/* ========================================================================= */ -/* UVH_SI_ALIAS0_OVERLAY_CONFIG */ -/* ========================================================================= */ -#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL - -#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24 -#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL -#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48 -#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL -#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63 -#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL - -union uvh_si_alias0_overlay_config_u { - unsigned long v; - struct uvh_si_alias0_overlay_config_s { - unsigned long rsvd_0_23: 24; /* */ - unsigned long base : 8; /* RW */ - unsigned long rsvd_32_47: 16; /* */ - unsigned long m_alias : 5; /* RW */ - unsigned long rsvd_53_62: 10; /* */ - unsigned long enable : 1; /* RW */ - } s; -}; - -/* ========================================================================= */ -/* UVH_SI_ALIAS1_OVERLAY_CONFIG */ -/* ========================================================================= */ -#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL - -#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24 -#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL -#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48 -#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL -#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63 -#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL - -union uvh_si_alias1_overlay_config_u { - unsigned long v; - struct uvh_si_alias1_overlay_config_s { - unsigned long rsvd_0_23: 24; /* */ - unsigned long base : 8; /* RW */ - unsigned long rsvd_32_47: 16; /* */ - unsigned long m_alias : 5; /* RW */ - unsigned long rsvd_53_62: 10; /* */ - unsigned long enable : 1; /* RW */ - } s; -}; - -/* ========================================================================= */ -/* UVH_SI_ALIAS2_OVERLAY_CONFIG */ -/* ========================================================================= */ -#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL - -#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24 -#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL -#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48 -#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL -#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63 -#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL - -union uvh_si_alias2_overlay_config_u { - unsigned long v; - struct uvh_si_alias2_overlay_config_s { - unsigned long rsvd_0_23: 24; /* */ - unsigned long base : 8; /* RW */ - unsigned long rsvd_32_47: 16; /* */ - unsigned long m_alias : 5; /* RW */ - unsigned long rsvd_53_62: 10; /* */ - unsigned long enable : 1; /* RW */ - } s; -}; - -#endif /* _ASM_X86_UV_UV_MMRS_H */ +#endif /* __ASM_UV_MMRS_X86_H__ */ diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index ed4118d..194539a 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -379,14 +379,14 @@ struct redir_addr { #define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT static __initdata struct redir_addr redir_addrs[] = { - {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG}, - {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG}, - {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG}, + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR}, + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR}, + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR}, }; static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size) { - union uvh_si_alias0_overlay_config_u alias; + union uvh_rh_gam_alias210_overlay_config_2_mmr_u alias; union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect; int i; @@ -660,7 +660,7 @@ void uv_nmi_init(void) void __init uv_system_init(void) { - union uvh_si_addr_map_config_u m_n_config; + union uvh_rh_gam_config_mmr_u m_n_config; union uvh_node_id_u node_id; unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size; int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val; @@ -670,7 +670,7 @@ void __init uv_system_init(void) map_low_mmrs(); - m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG); + m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR ); m_val = m_n_config.s.m_skt; n_val = m_n_config.s.n_skt; mmr_base = -- cgit v0.10.2 From bea278278f0bb9af3ce6234acece9772d401a252 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 10 Nov 2010 18:07:43 +0900 Subject: MAINTAINERS: update the sh git tree entry. Reflect the recent tree restructuring. Signed-off-by: Paul Mundt diff --git a/MAINTAINERS b/MAINTAINERS index 0094224..39267ac 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5705,7 +5705,7 @@ M: Paul Mundt L: linux-sh@vger.kernel.org W: http://www.linux-sh.org Q: http://patchwork.kernel.org/project/linux-sh/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git sh-latest S: Supported F: Documentation/sh/ F: arch/sh/ -- cgit v0.10.2 From 2f62bf7d238f6dfa39faf24c746d0b8dd60f85c5 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 4 Nov 2010 15:23:58 +0000 Subject: x86: Adjust section annotations in AMD Fam10 MMCONF enabling code check_enable_amd_mmconf_dmi() gets called only for the BSP, hence everything hanging off of it can be __init*. Signed-off-by: Jan Beulich Acked-by: Yinghai Lu LKML-Reference: <4CD2DE1E0200007800020990@vpn.id2.novell.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index 7182580..6da143c 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -217,13 +217,13 @@ void __cpuinit fam10h_check_enable_mmcfg(void) wrmsrl(address, val); } -static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d) +static int __init set_check_enable_amd_mmconf(const struct dmi_system_id *d) { pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF; return 0; } -static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = { +static const struct dmi_system_id __initconst mmconf_dmi_table[] = { { .callback = set_check_enable_amd_mmconf, .ident = "Sun Microsystems Machine", @@ -234,7 +234,8 @@ static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = { {} }; -void __cpuinit check_enable_amd_mmconf_dmi(void) +/* Called from a __cpuinit function, but only on the BSP. */ +void __ref check_enable_amd_mmconf_dmi(void) { dmi_check_system(mmconf_dmi_table); } -- cgit v0.10.2 From d22c0e5088912a9f05760c597e34876f58d1cee6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 10 Nov 2010 18:09:14 +0900 Subject: MAINTAINERS: update the ARM SH-Mobile git tree entry. Reflect the recent tree restructuring. Signed-off-by: Paul Mundt diff --git a/MAINTAINERS b/MAINTAINERS index 0094224..f5ec964 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -945,7 +945,7 @@ M: Magnus Damm L: linux-sh@vger.kernel.org W: http://oss.renesas.com Q: http://patchwork.kernel.org/project/linux-sh/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git rmobile-latest S: Supported F: arch/arm/mach-shmobile/ F: drivers/sh/ -- cgit v0.10.2 From 2a8dcbd6cd2270f912ca141547d9296ce08abe4a Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 7 Nov 2010 22:57:18 +0100 Subject: x86, apic: Remove double #include Remove the second inclusion. Signed-off-by: Jesper Juhl LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 850657d..3f838d5 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -52,7 +52,6 @@ #include #include #include -#include unsigned int num_processors; -- cgit v0.10.2 From 1f523bf36734375dd6e986c9f47f010d00a8caca Mon Sep 17 00:00:00 2001 From: Kusanagi Kouichi Date: Fri, 5 Nov 2010 20:04:42 +0900 Subject: x86, pvclock: Remove leftover scale_delta() function Commit 92580d64e16402762e2acc3022f065397c780425 ("x86: pvclock: Move scale_delta into common header") forgot to remove scale_delta. Signed-off-by: Kusanagi Kouichi Cc: Zachary Amsden Cc: Marcelo Tosatti Cc: Glauber Costa LKML-Reference: <20101105110444.BAF6D6FC03B@msa105.auone-net.jp> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c index bab3b9e..008b91e 100644 --- a/arch/x86/kernel/pvclock.c +++ b/arch/x86/kernel/pvclock.c @@ -41,44 +41,6 @@ void pvclock_set_flags(u8 flags) valid_flags = flags; } -/* - * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction, - * yielding a 64-bit result. - */ -static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift) -{ - u64 product; -#ifdef __i386__ - u32 tmp1, tmp2; -#endif - - if (shift < 0) - delta >>= -shift; - else - delta <<= shift; - -#ifdef __i386__ - __asm__ ( - "mul %5 ; " - "mov %4,%%eax ; " - "mov %%edx,%4 ; " - "mul %5 ; " - "xor %5,%5 ; " - "add %4,%%eax ; " - "adc %5,%%edx ; " - : "=A" (product), "=r" (tmp1), "=r" (tmp2) - : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); -#elif defined(__x86_64__) - __asm__ ( - "mul %%rdx ; shrd $32,%%rdx,%%rax" - : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) ); -#else -#error implement me! -#endif - - return product; -} - static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow) { u64 delta = native_read_tsc() - shadow->tsc_timestamp; -- cgit v0.10.2 From 32ed3036c56284a720c0c00d92ee14bf609f497d Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 10 Nov 2010 13:04:19 +0200 Subject: sisfb: limit POST memory test according to PCI resource length If the POST memory test fails, the driver may access illegal memory areas. Instead of hard coding the maximum size, set it according to the PCI resource length (an additional check is needed in sisfb_post_map_vram() to ensure it's big enough). DRAM sizing will later adjust video_size to the correct value. Signed-off-by: Aaro Koskinen Cc: Thomas Winischhofer Signed-off-by: Paul Mundt diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c index b52f8e4..3dde12b 100644 --- a/drivers/video/sis/sis_main.c +++ b/drivers/video/sis/sis_main.c @@ -4181,6 +4181,9 @@ static void __devinit sisfb_post_map_vram(struct sis_video_info *ivideo, unsigned int *mapsize, unsigned int min) { + if (*mapsize < (min << 20)) + return; + ivideo->video_vbase = ioremap(ivideo->video_base, (*mapsize)); if(!ivideo->video_vbase) { @@ -4514,7 +4517,7 @@ sisfb_post_sis300(struct pci_dev *pdev) } else { #endif /* Need to map max FB size for finding out about RAM size */ - mapsize = 64 << 20; + mapsize = ivideo->video_size; sisfb_post_map_vram(ivideo, &mapsize, 4); if(ivideo->video_vbase) { @@ -4680,7 +4683,7 @@ sisfb_post_xgi_ramsize(struct sis_video_info *ivideo) orSISIDXREG(SISSR, 0x20, (0x80 | 0x04)); /* Need to map max FB size for finding out about RAM size */ - mapsize = 256 << 20; + mapsize = ivideo->video_size; sisfb_post_map_vram(ivideo, &mapsize, 32); if(!ivideo->video_vbase) { @@ -5936,6 +5939,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } ivideo->video_base = pci_resource_start(pdev, 0); + ivideo->video_size = pci_resource_len(pdev, 0); ivideo->mmio_base = pci_resource_start(pdev, 1); ivideo->mmio_size = pci_resource_len(pdev, 1); ivideo->SiS_Pr.RelIO = pci_resource_start(pdev, 2) + 0x30; -- cgit v0.10.2 From 108409a8a4e325db38f27258da68d7207a0ad433 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Wed, 10 Nov 2010 11:45:18 +0200 Subject: OMAP: VRAM: improve VRAM error prints Improve the error prints to give more information about the offending address & size. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Mundt diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c index fed2a72..bb5ee06 100644 --- a/drivers/video/omap2/vram.c +++ b/drivers/video/omap2/vram.c @@ -554,9 +554,15 @@ void __init omap_vram_reserve_sdram_memblock(void) size = PAGE_ALIGN(size); if (paddr) { - if ((paddr & ~PAGE_MASK) || - !memblock_is_region_memory(paddr, size)) { - pr_err("Illegal SDRAM region for VRAM\n"); + if (paddr & ~PAGE_MASK) { + pr_err("VRAM start address 0x%08x not page aligned\n", + paddr); + return; + } + + if (!memblock_is_region_memory(paddr, size)) { + pr_err("Illegal SDRAM region 0x%08x..0x%08x for VRAM\n", + paddr, paddr + size - 1); return; } -- cgit v0.10.2 From 88abf44d3d8d4fefcbf3d57584d471e38cb51627 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Wed, 10 Nov 2010 11:45:19 +0200 Subject: OMAP: VRAM: Fix boot-time memory allocation Use memblock_free() and memblock_remove() to remove the allocated or reserved VRAM area from normal kernel memory. This is a slightly modified version of patches from Felipe Contreras and Namhyung Kim. Reported-by: Felipe Contreras Reported-by: Namhyung Kim Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Mundt diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c index bb5ee06..2fd7e52 100644 --- a/drivers/video/omap2/vram.c +++ b/drivers/video/omap2/vram.c @@ -576,9 +576,12 @@ void __init omap_vram_reserve_sdram_memblock(void) return; } } else { - paddr = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_REAL_LIMIT); + paddr = memblock_alloc(size, PAGE_SIZE); } + memblock_free(paddr, size); + memblock_remove(paddr, size); + omap_vram_add_region(paddr, size); pr_info("Reserving %u bytes SDRAM for VRAM\n", size); -- cgit v0.10.2 From 0bf3d5a0fb569b13fc5a05f7d5a240d2db70ac61 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Wed, 10 Nov 2010 11:45:20 +0200 Subject: OMAP: DSS: Fix documentation regarding 'vram' kernel parameter The DSS documentation didn't mention the option to give the VRAM start address. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Mundt diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS index 0af0e9e..888ae7b 100644 --- a/Documentation/arm/OMAP/DSS +++ b/Documentation/arm/OMAP/DSS @@ -255,9 +255,10 @@ framebuffer parameters. Kernel boot arguments --------------------- -vram= - - Amount of total VRAM to preallocate. For example, "10M". omapfb - allocates memory for framebuffers from VRAM. +vram=[,] + - Amount of total VRAM to preallocate and optionally a physical start + memory address. For example, "10M". omapfb allocates memory for + framebuffers from VRAM. omapfb.mode=:[,...] - Default video mode for specified displays. For example, -- cgit v0.10.2 From 4c115e951d80aff126468adaec7a6c7854f61ab8 Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Thu, 4 Nov 2010 15:00:00 -0400 Subject: futex: Address compiler warnings in exit_robust_list MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit 1dcc41bb (futex: Change 3rd arg of fetch_robust_entry() to unsigned int*) some gcc versions decided to emit the following warning: kernel/futex.c: In function ‘exit_robust_list’: kernel/futex.c:2492: warning: ‘next_pi’ may be used uninitialized in this function The commit did not introduce the warning as gcc should have warned before that commit as well. It's just gcc being silly. The code path really can't result in next_pi being unitialized (or should not), but let's keep the build clean. Annotate next_pi as an uninitialized_var. [ tglx: Addressed the same issue in futex_compat.c and massaged the changelog ] Signed-off-by: Darren Hart Tested-by: Matt Fleming Tested-by: Uwe Kleine-König Cc: Peter Zijlstra Cc: Eric Dumazet Cc: John Kacur Cc: Ingo Molnar LKML-Reference: <1288897200-13008-1-git-send-email-dvhart@linux.intel.com> Signed-off-by: Thomas Gleixner diff --git a/kernel/futex.c b/kernel/futex.c index 6c683b3..40a8777 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -2489,7 +2489,8 @@ void exit_robust_list(struct task_struct *curr) { struct robust_list_head __user *head = curr->robust_list; struct robust_list __user *entry, *next_entry, *pending; - unsigned int limit = ROBUST_LIST_LIMIT, pi, next_pi, pip; + unsigned int limit = ROBUST_LIST_LIMIT, pi, pip; + unsigned int uninitialized_var(next_pi); unsigned long futex_offset; int rc; diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c index 06da4df..a7934ac 100644 --- a/kernel/futex_compat.c +++ b/kernel/futex_compat.c @@ -49,7 +49,8 @@ void compat_exit_robust_list(struct task_struct *curr) { struct compat_robust_list_head __user *head = curr->compat_robust_list; struct robust_list __user *entry, *next_entry, *pending; - unsigned int limit = ROBUST_LIST_LIMIT, pi, next_pi, pip; + unsigned int limit = ROBUST_LIST_LIMIT, pi, pip; + unsigned int uninitialized_var(next_pi); compat_uptr_t uentry, next_uentry, upending; compat_long_t futex_offset; int rc; -- cgit v0.10.2 From 006839f12e9dc484a6227b263843f987abb709a4 Mon Sep 17 00:00:00 2001 From: Komuro Date: Sat, 23 Oct 2010 07:02:05 +0900 Subject: pd6729: Coding Style fixes pd6729: remove unnecessary space. Signed-off-by: Komuro Signed-off-by: Dominik Brodowski diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c index 8cbfa06..96c72e9 100644 --- a/drivers/pcmcia/pd6729.c +++ b/drivers/pcmcia/pd6729.c @@ -725,17 +725,17 @@ static int __devinit pd6729_pci_probe(struct pci_dev *dev, return 0; - err_out_free_res2: +err_out_free_res2: if (irq_mode == 1) free_irq(dev->irq, socket); else del_timer_sync(&socket->poll_timer); - err_out_free_res: +err_out_free_res: pci_release_regions(dev); - err_out_disable: +err_out_disable: pci_disable_device(dev); - err_out_free_mem: +err_out_free_mem: kfree(socket); return ret; } diff --git a/drivers/pcmcia/pd6729.h b/drivers/pcmcia/pd6729.h index 41418d3..c8e84bd 100644 --- a/drivers/pcmcia/pd6729.h +++ b/drivers/pcmcia/pd6729.h @@ -15,7 +15,7 @@ struct pd6729_socket { int number; int card_irq; - unsigned long io_base; /* base io address of the socket */ + unsigned long io_base; /* base io address of the socket */ struct pcmcia_socket socket; struct timer_list poll_timer; }; -- cgit v0.10.2 From 20fffee818ec43b64f58ab25c42705b7dcae16e5 Mon Sep 17 00:00:00 2001 From: Nicolas Kaiser Date: Fri, 22 Oct 2010 18:10:24 +0200 Subject: pcmcia/cm4000: fix error code I'm assuming it's not intended to instantly change the error code from -ENODEV to -EIO, is it? Signed-off-by: Nicolas Kaiser Acked-by: Harald Welte Signed-off-by: Dominik Brodowski diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index d962f25..777181a 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -979,8 +979,9 @@ static ssize_t cmm_read(struct file *filp, __user char *buf, size_t count, if (dev->flags0 & 1) { set_bit(IS_CMM_ABSENT, &dev->flags); rc = -ENODEV; + } else { + rc = -EIO; } - rc = -EIO; goto release_io; } -- cgit v0.10.2 From 5b85e04e93f9a2963e88156cae8629ee72efd890 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 4 Nov 2010 10:46:14 +0100 Subject: pcmcia/sa1100: don't put machine specific init functions in .init.text MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit These are called by sa11x0_drv_pcmcia_probe (which is marked now with __devinit) so they can go to .devinit.text now, too. This fixes: WARNING: drivers/pcmcia/sa1100_cs.o(.text+0x10): Section mismatch in reference from the function sa11x0_drv_pcmcia_probe() to the function .init.text:pcmcia_simpad_init() The function sa11x0_drv_pcmcia_probe() references the function __init pcmcia_simpad_init(). This is often because sa11x0_drv_pcmcia_probe lacks a __init annotation or the annotation of pcmcia_simpad_init is wrong. and a similar warning for pcmcia_collie_init, pcmcia_cerf_init, pcmcia_h3600_init and pcmcia_shannon_init. While at it mark pcmcia_assabet_init with __devinit, too. Signed-off-by: Uwe Kleine-König CC: Russell King CC: Eric Miao CC: linux-arm-kernel@lists.infradead.org Signed-off-by: Dominik Brodowski diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c index 0ea3b29..81af2b3 100644 --- a/drivers/pcmcia/pxa2xx_sharpsl.c +++ b/drivers/pcmcia/pxa2xx_sharpsl.c @@ -237,7 +237,7 @@ static struct pcmcia_low_level sharpsl_pcmcia_ops __initdata = { #ifdef CONFIG_SA1100_COLLIE #include "sa11xx_base.h" -int __init pcmcia_collie_init(struct device *dev) +int __devinit pcmcia_collie_init(struct device *dev) { int ret = -ENODEV; diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c index fd013a1..f1e8822 100644 --- a/drivers/pcmcia/sa1100_assabet.c +++ b/drivers/pcmcia/sa1100_assabet.c @@ -130,7 +130,7 @@ static struct pcmcia_low_level assabet_pcmcia_ops = { .socket_suspend = assabet_pcmcia_socket_suspend, }; -int pcmcia_assabet_init(struct device *dev) +int __devinit pcmcia_assabet_init(struct device *dev) { int ret = -ENODEV; diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c index 9bf088b..30560df 100644 --- a/drivers/pcmcia/sa1100_cerf.c +++ b/drivers/pcmcia/sa1100_cerf.c @@ -97,7 +97,7 @@ static struct pcmcia_low_level cerf_pcmcia_ops = { .socket_suspend = cerf_pcmcia_socket_suspend, }; -int __init pcmcia_cerf_init(struct device *dev) +int __devinit pcmcia_cerf_init(struct device *dev) { int ret = -ENODEV; diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c index 945857f..6b22859 100644 --- a/drivers/pcmcia/sa1100_generic.c +++ b/drivers/pcmcia/sa1100_generic.c @@ -64,7 +64,7 @@ static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = { #endif }; -static int sa11x0_drv_pcmcia_probe(struct platform_device *dev) +static int __devinit sa11x0_drv_pcmcia_probe(struct platform_device *dev) { int i, ret = -ENODEV; diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c index 56329ad..edf8f00 100644 --- a/drivers/pcmcia/sa1100_h3600.c +++ b/drivers/pcmcia/sa1100_h3600.c @@ -219,7 +219,7 @@ struct pcmcia_low_level h3600_pcmcia_ops = { .socket_suspend = h3600_pcmcia_socket_suspend, }; -int __init pcmcia_h3600_init(struct device *dev) +int __devinit pcmcia_h3600_init(struct device *dev) { int ret = -ENODEV; diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c index c4d5186..7ff1b43 100644 --- a/drivers/pcmcia/sa1100_shannon.c +++ b/drivers/pcmcia/sa1100_shannon.c @@ -113,7 +113,7 @@ static struct pcmcia_low_level shannon_pcmcia_ops = { .socket_suspend = shannon_pcmcia_socket_suspend, }; -int __init pcmcia_shannon_init(struct device *dev) +int __devinit pcmcia_shannon_init(struct device *dev) { int ret = -ENODEV; diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c index 05bd504..c998f7a 100644 --- a/drivers/pcmcia/sa1100_simpad.c +++ b/drivers/pcmcia/sa1100_simpad.c @@ -123,7 +123,7 @@ static struct pcmcia_low_level simpad_pcmcia_ops = { .socket_suspend = simpad_pcmcia_socket_suspend, }; -int __init pcmcia_simpad_init(struct device *dev) +int __devinit pcmcia_simpad_init(struct device *dev) { int ret = -ENODEV; -- cgit v0.10.2 From 86f94e3a1583765476ec06131c755af8318e6470 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Mon, 8 Nov 2010 15:58:01 -0800 Subject: pcmcia: fix warning in synclink driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During builds I see the following warning - CC [M] drivers/char/pcmcia/synclink_cs.o drivers/char/pcmcia/synclink_cs.c:2194: warning: ‘mgslpc_get_icount’ defined but not used The function is a callback meant to be assigned to get_icount (added during 0587102cf). Fix accordingly. Signed-off-by: Andres Salomon Signed-off-by: Dominik Brodowski diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index bfc10f8..eaa4199 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -2796,6 +2796,7 @@ static const struct tty_operations mgslpc_ops = { .hangup = mgslpc_hangup, .tiocmget = tiocmget, .tiocmset = tiocmset, + .get_icount = mgslpc_get_icount, .proc_fops = &mgslpc_proc_fops, }; -- cgit v0.10.2 From 106665d937df6eff33c71997a52f7bc3aefa6c12 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 9 Nov 2010 17:14:01 -0800 Subject: drivers/pcmcia/soc_common.c: Use printf extension %pV Using %pV reduces the number of printk calls and eliminates any possible message interleaving from other printk calls. Signed-off-by: Joe Perches CC: Russell King CC: Eric Miao CC: linux-arm-kernel@lists.infradead.org Signed-off-by: Dominik Brodowski diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index 689e3c0..3753fd0 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -57,11 +57,16 @@ module_param(pc_debug, int, 0644); void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func, int lvl, const char *fmt, ...) { + struct va_format vaf; va_list args; if (pc_debug > lvl) { - printk(KERN_DEBUG "skt%u: %s: ", skt->nr, func); va_start(args, fmt); - vprintk(fmt, args); + + vaf.fmt = fmt; + vaf.va = &args; + + printk(KERN_DEBUG "skt%u: %s: %pV", skt->nr, func, &vaf); + va_end(args); } } -- cgit v0.10.2 From 9284bcf4e335e5f18a8bc7b26461c33ab60d0689 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 29 Oct 2010 08:10:18 -0600 Subject: block: check for proper length of iov entries in blk_rq_map_user_iov() Ensure that we pass down properly validated iov segments before calling into the mapping or copy functions. Reported-by: Dan Rosenberg Cc: stable@kernel.org Signed-off-by: Jens Axboe diff --git a/block/blk-map.c b/block/blk-map.c index d4a586d..5d5dbe4 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -205,6 +205,8 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq, unaligned = 1; break; } + if (!iov[i].iov_len) + return -EINVAL; } if (unaligned || (q->dma_pad_mask & len) || map_data) -- cgit v0.10.2 From 9f864c80913467312c7b8690e41fb5ebd1b50e92 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 29 Oct 2010 11:31:42 -0600 Subject: block: take care not to overflow when calculating total iov length Reported-by: Dan Rosenberg Cc: stable@kernel.org Signed-off-by: Jens Axboe diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index a8b5a10..4f4230b 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -321,33 +321,47 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk, if (hdr->iovec_count) { const int size = sizeof(struct sg_iovec) * hdr->iovec_count; size_t iov_data_len; - struct sg_iovec *iov; + struct sg_iovec *sg_iov; + struct iovec *iov; + int i; - iov = kmalloc(size, GFP_KERNEL); - if (!iov) { + sg_iov = kmalloc(size, GFP_KERNEL); + if (!sg_iov) { ret = -ENOMEM; goto out; } - if (copy_from_user(iov, hdr->dxferp, size)) { - kfree(iov); + if (copy_from_user(sg_iov, hdr->dxferp, size)) { + kfree(sg_iov); ret = -EFAULT; goto out; } + /* + * Sum up the vecs, making sure they don't overflow + */ + iov = (struct iovec *) sg_iov; + iov_data_len = 0; + for (i = 0; i < hdr->iovec_count; i++) { + if (iov_data_len + iov[i].iov_len < iov_data_len) { + kfree(sg_iov); + ret = -EINVAL; + goto out; + } + iov_data_len += iov[i].iov_len; + } + /* SG_IO howto says that the shorter of the two wins */ - iov_data_len = iov_length((struct iovec *)iov, - hdr->iovec_count); if (hdr->dxfer_len < iov_data_len) { - hdr->iovec_count = iov_shorten((struct iovec *)iov, + hdr->iovec_count = iov_shorten(iov, hdr->iovec_count, hdr->dxfer_len); iov_data_len = hdr->dxfer_len; } - ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count, + ret = blk_rq_map_user_iov(q, rq, NULL, sg_iov, hdr->iovec_count, iov_data_len, GFP_KERNEL); - kfree(iov); + kfree(sg_iov); } else if (hdr->dxfer_len) ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len, GFP_KERNEL); -- cgit v0.10.2 From f3f63c1c28bc861a931fac283b5bc3585efb8967 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 29 Oct 2010 11:46:56 -0600 Subject: block: limit vec count in bio_kmalloc() and bio_alloc_map_data() Reported-by: Dan Rosenberg Cc: stable@kernel.org Signed-off-by: Jens Axboe diff --git a/fs/bio.c b/fs/bio.c index 8abb2df..8317a2c 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -370,6 +370,9 @@ struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs) { struct bio *bio; + if (nr_iovecs > UIO_MAXIOV) + return NULL; + bio = kmalloc(sizeof(struct bio) + nr_iovecs * sizeof(struct bio_vec), gfp_mask); if (unlikely(!bio)) @@ -697,8 +700,12 @@ static void bio_free_map_data(struct bio_map_data *bmd) static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count, gfp_t gfp_mask) { - struct bio_map_data *bmd = kmalloc(sizeof(*bmd), gfp_mask); + struct bio_map_data *bmd; + + if (iov_count > UIO_MAXIOV) + return NULL; + bmd = kmalloc(sizeof(*bmd), gfp_mask); if (!bmd) return NULL; -- cgit v0.10.2 From cb4644cac4a2797afc847e6c92736664d4b0ea34 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 10 Nov 2010 14:36:25 +0100 Subject: bio: take care not overflow page count when mapping/copying user data If the iovec is being set up in a way that causes uaddr + PAGE_SIZE to overflow, we could end up attempting to map a huge number of pages. Check for this invalid input type. Reported-by: Dan Rosenberg Cc: stable@kernel.org Signed-off-by: Jens Axboe diff --git a/fs/bio.c b/fs/bio.c index 8317a2c..4bd454f 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -834,6 +834,12 @@ struct bio *bio_copy_user_iov(struct request_queue *q, end = (uaddr + iov[i].iov_len + PAGE_SIZE - 1) >> PAGE_SHIFT; start = uaddr >> PAGE_SHIFT; + /* + * Overflow, abort + */ + if (end < start) + return ERR_PTR(-EINVAL); + nr_pages += end - start; len += iov[i].iov_len; } @@ -962,6 +968,12 @@ static struct bio *__bio_map_user_iov(struct request_queue *q, unsigned long end = (uaddr + len + PAGE_SIZE - 1) >> PAGE_SHIFT; unsigned long start = uaddr >> PAGE_SHIFT; + /* + * Overflow, abort + */ + if (end < start) + return ERR_PTR(-EINVAL); + nr_pages += end - start; /* * buffer must be aligned to at least hardsector size for now @@ -989,7 +1001,7 @@ static struct bio *__bio_map_user_iov(struct request_queue *q, unsigned long start = uaddr >> PAGE_SHIFT; const int local_nr_pages = end - start; const int page_limit = cur_page + local_nr_pages; - + ret = get_user_pages_fast(uaddr, local_nr_pages, write_to_vm, &pages[cur_page]); if (ret < local_nr_pages) { -- cgit v0.10.2 From 90fdb0b98a62d78a0650b9fd3ddc58a48f71d740 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 8 Nov 2010 14:29:13 +0100 Subject: cciss: fix proc warning on attempt to remove non-existant directory Randy reports that he gets the following stack trace when removing the cciss module: [ 109.164277] Pid: 3463, comm: rmmod Not tainted 2.6.37-rc1 #7 [ 109.164280] Call Trace: [ 109.164292] [] warn_slowpath_common+0xc6/0xf3 [ 109.164299] [] warn_slowpath_fmt+0x5b/0x6b [ 109.164307] [] ? _raw_spin_unlock+0x40/0x4b [ 109.164313] [] remove_proc_entry+0x156/0x35e [ 109.164320] [] ? do_raw_spin_unlock+0xff/0x10f [ 109.164327] [] ? trace_hardirqs_on+0x10/0x4a [ 109.164333] [] ? _raw_spin_unlock_irq+0x4c/0x7b [ 109.164339] [] ? wait_for_common+0x145/0x15e [ 109.164345] [] ? default_wake_function+0x0/0x22 [ 109.164357] [] cciss_cleanup+0xa9/0xc7 [cciss] [ 109.164365] [] sys_delete_module+0x2d6/0x368 [ 109.164371] [] ? lockdep_sys_exit_thunk+0x35/0x67 [ 109.164377] [] ? audit_syscall_entry+0x172/0x1a5 [ 109.164383] [] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 109.164389] [] system_call_fastpath+0x16/0x1b [ 109.164394] ---[ end trace 88e8568246ed0b1d ]--- which will happen if you don't actually have an HP CISS adapter, since it'll do an uncondional removal of a proc directory it never attempted to create in that case. Reported-by: Randy Dunlap Tested-by: Randy Dunlap Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 2cc4dda..2cdbc24 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -4936,7 +4936,8 @@ static void __exit cciss_cleanup(void) } } kthread_stop(cciss_scan_thread); - remove_proc_entry("driver/cciss", NULL); + if (proc_cciss) + remove_proc_entry("driver/cciss", NULL); bus_unregister(&cciss_bus_type); } -- cgit v0.10.2 From 77304d2abac6101f7249754ffdd4421258877ab0 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Mon, 8 Nov 2010 14:39:12 +0100 Subject: block: read i_size with i_size_read() Convert direct reads of an inode's i_size to using i_size_read(). i_size_{read,write} use a seqcount to protect reads from accessing incomple writes. Concurrent i_size_write()s require mutual exclussion to protect the seqcount that is used by i_size_{read,write}. But i_size_read() callers do not need to use additional locking. Signed-off-by: Mike Snitzer Acked-by: NeilBrown Acked-by: Lars Ellenberg Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index f0834e2..17fcb83 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1351,7 +1351,7 @@ static void handle_bad_sector(struct bio *bio) bdevname(bio->bi_bdev, b), bio->bi_rw, (unsigned long long)bio->bi_sector + bio_sectors(bio), - (long long)(bio->bi_bdev->bd_inode->i_size >> 9)); + (long long)(i_size_read(bio->bi_bdev->bd_inode) >> 9)); set_bit(BIO_EOF, &bio->bi_flags); } @@ -1404,7 +1404,7 @@ static inline int bio_check_eod(struct bio *bio, unsigned int nr_sectors) return 0; /* Test device or partition size, when known. */ - maxsector = bio->bi_bdev->bd_inode->i_size >> 9; + maxsector = i_size_read(bio->bi_bdev->bd_inode) >> 9; if (maxsector) { sector_t sector = bio->bi_sector; diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c index 119f07b..58c6ee5 100644 --- a/block/compat_ioctl.c +++ b/block/compat_ioctl.c @@ -744,13 +744,13 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg) bdi->ra_pages = (arg * 512) / PAGE_CACHE_SIZE; return 0; case BLKGETSIZE: - size = bdev->bd_inode->i_size; + size = i_size_read(bdev->bd_inode); if ((size >> 9) > ~0UL) return -EFBIG; return compat_put_ulong(arg, size >> 9); case BLKGETSIZE64_32: - return compat_put_u64(arg, bdev->bd_inode->i_size); + return compat_put_u64(arg, i_size_read(bdev->bd_inode)); case BLKTRACESETUP32: case BLKTRACESTART: /* compatible */ diff --git a/block/ioctl.c b/block/ioctl.c index d724ceb..38aa194 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -125,7 +125,7 @@ static int blk_ioctl_discard(struct block_device *bdev, uint64_t start, start >>= 9; len >>= 9; - if (start + len > (bdev->bd_inode->i_size >> 9)) + if (start + len > (i_size_read(bdev->bd_inode) >> 9)) return -EINVAL; if (secure) flags |= BLKDEV_DISCARD_SECURE; @@ -307,12 +307,12 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, ret = blkdev_reread_part(bdev); break; case BLKGETSIZE: - size = bdev->bd_inode->i_size; + size = i_size_read(bdev->bd_inode); if ((size >> 9) > ~0UL) return -EFBIG; return put_ulong(arg, size >> 9); case BLKGETSIZE64: - return put_u64(arg, bdev->bd_inode->i_size); + return put_u64(arg, i_size_read(bdev->bd_inode)); case BLKTRACESTART: case BLKTRACESTOP: case BLKTRACESETUP: diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 9bdcf43..2637f49 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -1874,7 +1874,7 @@ static inline sector_t drbd_md_last_sector(struct drbd_backing_dev *bdev) static inline sector_t drbd_get_capacity(struct block_device *bdev) { /* return bdev ? get_capacity(bdev->bd_disk) : 0; */ - return bdev ? bdev->bd_inode->i_size >> 9 : 0; + return bdev ? i_size_read(bdev->bd_inode) >> 9 : 0; } /** diff --git a/drivers/md/md.c b/drivers/md/md.c index 4e957f3..324a366 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -706,7 +706,7 @@ static struct mdk_personality *find_pers(int level, char *clevel) /* return the offset of the super block in 512byte sectors */ static inline sector_t calc_dev_sboffset(struct block_device *bdev) { - sector_t num_sectors = bdev->bd_inode->i_size / 512; + sector_t num_sectors = i_size_read(bdev->bd_inode) / 512; return MD_NEW_SIZE_SECTORS(num_sectors); } @@ -1386,7 +1386,7 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version) */ switch(minor_version) { case 0: - sb_start = rdev->bdev->bd_inode->i_size >> 9; + sb_start = i_size_read(rdev->bdev->bd_inode) >> 9; sb_start -= 8*2; sb_start &= ~(sector_t)(4*2-1); break; @@ -1472,7 +1472,7 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version) ret = 0; } if (minor_version) - rdev->sectors = (rdev->bdev->bd_inode->i_size >> 9) - + rdev->sectors = (i_size_read(rdev->bdev->bd_inode) >> 9) - le64_to_cpu(sb->data_offset); else rdev->sectors = rdev->sb_start; @@ -1680,7 +1680,7 @@ super_1_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors) return 0; /* component must fit device */ if (rdev->sb_start < rdev->data_offset) { /* minor versions 1 and 2; superblock before data */ - max_sectors = rdev->bdev->bd_inode->i_size >> 9; + max_sectors = i_size_read(rdev->bdev->bd_inode) >> 9; max_sectors -= rdev->data_offset; if (!num_sectors || num_sectors > max_sectors) num_sectors = max_sectors; @@ -1690,7 +1690,7 @@ super_1_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors) } else { /* minor version 0; superblock after data */ sector_t sb_start; - sb_start = (rdev->bdev->bd_inode->i_size >> 9) - 8*2; + sb_start = (i_size_read(rdev->bdev->bd_inode) >> 9) - 8*2; sb_start &= ~(sector_t)(4*2 - 1); max_sectors = rdev->sectors + sb_start - rdev->sb_start; if (!num_sectors || num_sectors > max_sectors) @@ -2584,7 +2584,7 @@ rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len) if (!sectors) return -EBUSY; } else if (!sectors) - sectors = (rdev->bdev->bd_inode->i_size >> 9) - + sectors = (i_size_read(rdev->bdev->bd_inode) >> 9) - rdev->data_offset; } if (sectors < my_mddev->dev_sectors) @@ -2797,7 +2797,7 @@ static mdk_rdev_t *md_import_device(dev_t newdev, int super_format, int super_mi kobject_init(&rdev->kobj, &rdev_ktype); - size = rdev->bdev->bd_inode->i_size >> BLOCK_SIZE_BITS; + size = i_size_read(rdev->bdev->bd_inode) >> BLOCK_SIZE_BITS; if (!size) { printk(KERN_WARNING "md: %s has zero or unknown size, marking faulty!\n", @@ -5235,8 +5235,8 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info) if (!mddev->persistent) { printk(KERN_INFO "md: nonpersistent superblock ...\n"); - rdev->sb_start = rdev->bdev->bd_inode->i_size / 512; - } else + rdev->sb_start = i_size_read(rdev->bdev->bd_inode) / 512; + } else rdev->sb_start = calc_dev_sboffset(rdev->bdev); rdev->sectors = rdev->sb_start; @@ -5306,7 +5306,7 @@ static int hot_add_disk(mddev_t * mddev, dev_t dev) if (mddev->persistent) rdev->sb_start = calc_dev_sboffset(rdev->bdev); else - rdev->sb_start = rdev->bdev->bd_inode->i_size / 512; + rdev->sb_start = i_size_read(rdev->bdev->bd_inode) / 512; rdev->sectors = rdev->sb_start; -- cgit v0.10.2 From a014741c0adfb8fb79952939ca087cf03d272bb9 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Mon, 8 Nov 2010 14:42:40 +0100 Subject: block: ioctl: fix information leak to userland Structure hd_geometry is copied to userland with 4 padding bytes between cylinders and start fields uninitialized on 64-bit platforms. It leads to leaking of contents of kernel stack memory. Currently there is no memset() in real implementations of getgeo() in drivers/block/, so it makes sense to have memset() in blkdev_ioctl(). Signed-off-by: Vasiliy Kulikov Signed-off-by: Jens Axboe diff --git a/block/ioctl.c b/block/ioctl.c index 38aa194..3d866d0 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -242,6 +242,7 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, * We need to set the startsect first, the driver may * want to override it. */ + memset(&geo, 0, sizeof(geo)); geo.start = get_start_sect(bdev); ret = disk->fops->getgeo(bdev, &geo); if (ret) -- cgit v0.10.2 From 1447399b3e34af016c368b4178db7ef0e04e15b0 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Tue, 9 Nov 2010 21:33:02 +0100 Subject: ioprio: fix RCU locking around task dereference With 2.6.37-rc1, I observe sys_ioprio_set not taking the RCU lock [1] across access to the task credentials. Inspecting the code in fs/ioprio.c, the tasklist_lock is held for read across the __task_cred call, which is presumably sufficient to prevent the task credentials becoming stale. =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/pid.c:419 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 1 lock held by start-stop-daem/2246: #0: (tasklist_lock){.?.?..}, at: [] sys_ioprio_set+0x8a/0x400 stack backtrace: Pid: 2246, comm: start-stop-daem Not tainted 2.6.37-rc1-330cd+ #2 Call Trace: [] lockdep_rcu_dereference+0xa4/0xc0 [] find_task_by_pid_ns+0x81/0x90 [] find_task_by_vpid+0x1d/0x20 [] sys_ioprio_set+0x3f0/0x400 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b Take the RCU lock for read across acquiring the pointer to the task credentials and dereferencing it. Signed-off-by: Daniel J Blueman Fixed up by Jens to fix missing rcu_read_unlock() on mismatches. Signed-off-by: Jens Axboe diff --git a/fs/ioprio.c b/fs/ioprio.c index 748cfb9..8def14e 100644 --- a/fs/ioprio.c +++ b/fs/ioprio.c @@ -139,7 +139,12 @@ SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio) break; do_each_thread(g, p) { - if (__task_cred(p)->uid != who) + int match; + + rcu_read_lock(); + match = __task_cred(p)->uid == who; + rcu_read_unlock(); + if (!match) continue; ret = set_task_ioprio(p, ioprio); if (ret) @@ -232,7 +237,12 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who) break; do_each_thread(g, p) { - if (__task_cred(p)->uid != user->uid) + int match; + + rcu_read_lock(); + match = __task_cred(p)->uid == user->uid; + rcu_read_unlock(); + if (!match) continue; tmpio = get_task_ioprio(p); if (tmpio < 0) -- cgit v0.10.2 From f85acd81aa623e3dcf268c90e5cd8ecf36830984 Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Tue, 9 Nov 2010 21:26:56 +0100 Subject: ioprio: rcu_read_lock/unlock protect find_task_by_vpid call (V2) Commit 4221a9918e38b7494cee341dda7b7b4bb8c04bde "Add RCU check for find_task_by_vpid()" introduced rcu_lockdep_assert to find_task_by_pid_ns= Assertion failed in sys_ioprio_get. The patch is fixing assertion failure in ioprio_set as well. kernel/pid.c:419 invoked rcu_dereference_check() without protection! stack backtrace: Pid: 4254, comm: iotop Not tainted Call Trace: [] lockdep_rcu_dereference+0xaa/0xb2 [] find_task_by_pid_ns+0x4f/0x68 [] find_task_by_vpid+0x1d/0x1f [] sys_ioprio_get+0x50/0x2da [] system_call_fastpath+0x16/0x1b V2: rcu critical section expanded according to comment by Paul E. McKenney Signed-off-by: Sergey Senozhatsky Acked-by: Paul E. McKenney Signed-off-by: Jens Axboe diff --git a/fs/ioprio.c b/fs/ioprio.c index 8def14e..2f7d05c 100644 --- a/fs/ioprio.c +++ b/fs/ioprio.c @@ -111,12 +111,14 @@ SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio) read_lock(&tasklist_lock); switch (which) { case IOPRIO_WHO_PROCESS: + rcu_read_lock(); if (!who) p = current; else p = find_task_by_vpid(who); if (p) ret = set_task_ioprio(p, ioprio); + rcu_read_unlock(); break; case IOPRIO_WHO_PGRP: if (!who) @@ -205,12 +207,14 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who) read_lock(&tasklist_lock); switch (which) { case IOPRIO_WHO_PROCESS: + rcu_read_lock(); if (!who) p = current; else p = find_task_by_vpid(who); if (p) ret = get_task_ioprio(p); + rcu_read_unlock(); break; case IOPRIO_WHO_PGRP: if (!who) -- cgit v0.10.2 From e8719adf30c136319a77824d032b3a185148f8f9 Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Wed, 10 Nov 2010 07:52:32 -0600 Subject: perf trace scripting: fix some small memory leaks and missing error checks Free the other two fields of script_desc which somehow got overlooked, free malloc'ed args in case exec fails, and add missing checks for failed mallocs. Signed-off-by: Tom Zanussi Acked-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index 2f8df45..368e624 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -337,6 +337,8 @@ static struct script_desc *script_desc__new(const char *name) static void script_desc__delete(struct script_desc *s) { free(s->name); + free(s->half_liner); + free(s->args); free(s); } @@ -626,6 +628,9 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used) close(live_pipe[0]); __argv = malloc(6 * sizeof(const char *)); + if (!__argv) + die("malloc"); + __argv[0] = "/bin/sh"; __argv[1] = record_script_path; __argv[2] = "-q"; @@ -634,6 +639,7 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used) __argv[5] = NULL; execvp("/bin/sh", (char **)__argv); + free(__argv); exit(-1); } @@ -641,6 +647,8 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used) close(live_pipe[1]); __argv = malloc((argc + 3) * sizeof(const char *)); + if (!__argv) + die("malloc"); __argv[0] = "/bin/sh"; __argv[1] = report_script_path; for (i = 2; i < argc; i++) @@ -650,6 +658,7 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used) __argv[i++] = NULL; execvp("/bin/sh", (char **)__argv); + free(__argv); exit(-1); } @@ -661,6 +670,8 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used) } __argv = malloc((argc + 1) * sizeof(const char *)); + if (!__argv) + die("malloc"); __argv[0] = "/bin/sh"; __argv[1] = script_path; for (i = 3; i < argc; i++) @@ -668,6 +679,7 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used) __argv[argc - 1] = NULL; execvp("/bin/sh", (char **)__argv); + free(__argv); exit(-1); } -- cgit v0.10.2 From 02e031cbc843b010e72fcc05c76113c688b2860f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 10 Nov 2010 14:54:09 +0100 Subject: block: remove REQ_HARDBARRIER REQ_HARDBARRIER is dead now, so remove the leftovers. What's left at this point is: - various checks inside the block layer. - sanity checks in bio based drivers. - now unused bio_empty_barrier helper. - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while, but Xen really needs to sort out it's barrier situaton. - setting of ordered tags in uas - dead code copied from old scsi drivers. - scsi different retry for barriers - it's dead and should have been removed when flushes were converted to FS requests. - blktrace handling of barriers - removed. Someone who knows blktrace better should add support for REQ_FLUSH and REQ_FUA, though. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index 17fcb83..4ce953f 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1194,13 +1194,6 @@ static int __make_request(struct request_queue *q, struct bio *bio) int where = ELEVATOR_INSERT_SORT; int rw_flags; - /* REQ_HARDBARRIER is no more */ - if (WARN_ONCE(bio->bi_rw & REQ_HARDBARRIER, - "block: HARDBARRIER is deprecated, use FLUSH/FUA instead\n")) { - bio_endio(bio, -EOPNOTSUPP); - return 0; - } - /* * low level driver can indicate that it wants pages above a * certain limit bounced to low memory (ie for highmem, or even diff --git a/block/elevator.c b/block/elevator.c index 282e830..2569512 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -429,7 +429,7 @@ void elv_dispatch_sort(struct request_queue *q, struct request *rq) q->nr_sorted--; boundary = q->end_sector; - stop_flags = REQ_SOFTBARRIER | REQ_HARDBARRIER | REQ_STARTED; + stop_flags = REQ_SOFTBARRIER | REQ_STARTED; list_for_each_prev(entry, &q->queue_head) { struct request *pos = list_entry_rq(entry); @@ -691,7 +691,7 @@ void elv_insert(struct request_queue *q, struct request *rq, int where) void __elv_add_request(struct request_queue *q, struct request *rq, int where, int plug) { - if (rq->cmd_flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) { + if (rq->cmd_flags & REQ_SOFTBARRIER) { /* barriers are scheduling boundary, update end_sector */ if (rq->cmd_type == REQ_TYPE_FS || (rq->cmd_flags & REQ_DISCARD)) { diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c index 541e188..528f631 100644 --- a/drivers/block/aoe/aoeblk.c +++ b/drivers/block/aoe/aoeblk.c @@ -180,9 +180,6 @@ aoeblk_make_request(struct request_queue *q, struct bio *bio) BUG(); bio_endio(bio, -ENXIO); return 0; - } else if (bio->bi_rw & REQ_HARDBARRIER) { - bio_endio(bio, -EOPNOTSUPP); - return 0; } else if (bio->bi_io_vec == NULL) { printk(KERN_ERR "aoe: bi_io_vec is NULL\n"); BUG(); diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 1e5284e..7ea0bea 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -481,12 +481,6 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio) if (bio_rw(bio) == WRITE) { struct file *file = lo->lo_backing_file; - /* REQ_HARDBARRIER is deprecated */ - if (bio->bi_rw & REQ_HARDBARRIER) { - ret = -EOPNOTSUPP; - goto out; - } - if (bio->bi_rw & REQ_FLUSH) { ret = vfs_fsync(file, 0); if (unlikely(ret && ret != -EINVAL)) { diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 06e2812..255035c 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -289,8 +289,6 @@ static int blkif_queue_request(struct request *req) ring_req->operation = rq_data_dir(req) ? BLKIF_OP_WRITE : BLKIF_OP_READ; - if (req->cmd_flags & REQ_HARDBARRIER) - ring_req->operation = BLKIF_OP_WRITE_BARRIER; ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg); BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST); diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 1de30eb..f3cf924 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -320,19 +320,11 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) "changed. The Linux SCSI layer does not " "automatically adjust these parameters.\n"); - if (scmd->request->cmd_flags & REQ_HARDBARRIER) - /* - * barrier requests should always retry on UA - * otherwise block will get a spurious error - */ - return NEEDS_RETRY; - else - /* - * for normal (non barrier) commands, pass the - * UA upwards for a determination in the - * completion functions - */ - return SUCCESS; + /* + * Pass the UA upwards for a determination in the completion + * functions. + */ + return SUCCESS; /* these three are not supported */ case COPY_ABORTED: diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 2054b1e..d126819 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -331,10 +331,7 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, iu->iu_id = IU_ID_COMMAND; iu->tag = cpu_to_be16(stream_id); - if (sdev->ordered_tags && (cmnd->request->cmd_flags & REQ_HARDBARRIER)) - iu->prio_attr = UAS_ORDERED_TAG; - else - iu->prio_attr = UAS_SIMPLE_TAG; + iu->prio_attr = UAS_SIMPLE_TAG; iu->len = len; int_to_scsilun(sdev->lun, &iu->lun); memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len); diff --git a/include/linux/bio.h b/include/linux/bio.h index ba67999..35dcdb3 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -66,10 +66,6 @@ #define bio_offset(bio) bio_iovec((bio))->bv_offset #define bio_segments(bio) ((bio)->bi_vcnt - (bio)->bi_idx) #define bio_sectors(bio) ((bio)->bi_size >> 9) -#define bio_empty_barrier(bio) \ - ((bio->bi_rw & REQ_HARDBARRIER) && \ - !bio_has_data(bio) && \ - !(bio->bi_rw & REQ_DISCARD)) static inline unsigned int bio_cur_bytes(struct bio *bio) { diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 0437ab6..46ad519 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -122,7 +122,6 @@ enum rq_flag_bits { __REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */ __REQ_FAILFAST_DRIVER, /* no driver retries of driver errors */ - __REQ_HARDBARRIER, /* may not be passed by drive either */ __REQ_SYNC, /* request is sync (sync write or read) */ __REQ_META, /* metadata io request */ __REQ_DISCARD, /* request to discard sectors */ @@ -159,7 +158,6 @@ enum rq_flag_bits { #define REQ_FAILFAST_DEV (1 << __REQ_FAILFAST_DEV) #define REQ_FAILFAST_TRANSPORT (1 << __REQ_FAILFAST_TRANSPORT) #define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER) -#define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER) #define REQ_SYNC (1 << __REQ_SYNC) #define REQ_META (1 << __REQ_META) #define REQ_DISCARD (1 << __REQ_DISCARD) @@ -168,8 +166,8 @@ enum rq_flag_bits { #define REQ_FAILFAST_MASK \ (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER) #define REQ_COMMON_MASK \ - (REQ_WRITE | REQ_FAILFAST_MASK | REQ_HARDBARRIER | REQ_SYNC | \ - REQ_META | REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA) + (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \ + REQ_NOIDLE | REQ_FLUSH | REQ_FUA) #define REQ_CLONE_MASK REQ_COMMON_MASK #define REQ_UNPLUG (1 << __REQ_UNPLUG) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 5027a59..aae86fd 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -552,8 +552,7 @@ static inline void blk_clear_queue_full(struct request_queue *q, int sync) * it already be started by driver. */ #define RQ_NOMERGE_FLAGS \ - (REQ_NOMERGE | REQ_STARTED | REQ_HARDBARRIER | REQ_SOFTBARRIER | \ - REQ_FLUSH | REQ_FUA) + (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA) #define rq_mergeable(rq) \ (!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \ (((rq)->cmd_flags & REQ_DISCARD) || \ diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index bc251ed..7b8ec02 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -168,7 +168,6 @@ static int act_log_check(struct blk_trace *bt, u32 what, sector_t sector, static const u32 ddir_act[2] = { BLK_TC_ACT(BLK_TC_READ), BLK_TC_ACT(BLK_TC_WRITE) }; -#define BLK_TC_HARDBARRIER BLK_TC_BARRIER #define BLK_TC_RAHEAD BLK_TC_AHEAD /* The ilog2() calls fall out because they're constant */ @@ -196,7 +195,6 @@ static void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes, return; what |= ddir_act[rw & WRITE]; - what |= MASK_TC_BIT(rw, HARDBARRIER); what |= MASK_TC_BIT(rw, SYNC); what |= MASK_TC_BIT(rw, RAHEAD); what |= MASK_TC_BIT(rw, META); @@ -1807,8 +1805,6 @@ void blk_fill_rwbs(char *rwbs, u32 rw, int bytes) if (rw & REQ_RAHEAD) rwbs[i++] = 'A'; - if (rw & REQ_HARDBARRIER) - rwbs[i++] = 'B'; if (rw & REQ_SYNC) rwbs[i++] = 'S'; if (rw & REQ_META) -- cgit v0.10.2 From b0b6d914e2b7e0a736635515e87be718050c17c8 Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Wed, 10 Nov 2010 08:08:20 -0600 Subject: perf trace scripting: remove system-wide param from shell scripts Including -a unconditionally when recording doesn't allow for the option of running scripts without it. Future patches will add add it back if needed at run-time. Signed-off-by: Tom Zanussi Acked-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/scripts/perl/bin/failed-syscalls-record b/tools/perf/scripts/perl/bin/failed-syscalls-record index eb5846b..8104895 100644 --- a/tools/perf/scripts/perl/bin/failed-syscalls-record +++ b/tools/perf/scripts/perl/bin/failed-syscalls-record @@ -1,2 +1,2 @@ #!/bin/bash -perf record -a -e raw_syscalls:sys_exit $@ +perf record -e raw_syscalls:sys_exit $@ diff --git a/tools/perf/scripts/perl/bin/rw-by-file-record b/tools/perf/scripts/perl/bin/rw-by-file-record index 5bfaae5..33efc86 100644 --- a/tools/perf/scripts/perl/bin/rw-by-file-record +++ b/tools/perf/scripts/perl/bin/rw-by-file-record @@ -1,3 +1,3 @@ #!/bin/bash -perf record -a -e syscalls:sys_enter_read -e syscalls:sys_enter_write $@ +perf record -e syscalls:sys_enter_read -e syscalls:sys_enter_write $@ diff --git a/tools/perf/scripts/perl/bin/rw-by-pid-record b/tools/perf/scripts/perl/bin/rw-by-pid-record index 6e0b2f7..7cb9db2 100644 --- a/tools/perf/scripts/perl/bin/rw-by-pid-record +++ b/tools/perf/scripts/perl/bin/rw-by-pid-record @@ -1,2 +1,2 @@ #!/bin/bash -perf record -a -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@ +perf record -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@ diff --git a/tools/perf/scripts/perl/bin/rwtop-record b/tools/perf/scripts/perl/bin/rwtop-record index 6e0b2f7..7cb9db2 100644 --- a/tools/perf/scripts/perl/bin/rwtop-record +++ b/tools/perf/scripts/perl/bin/rwtop-record @@ -1,2 +1,2 @@ #!/bin/bash -perf record -a -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@ +perf record -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@ diff --git a/tools/perf/scripts/perl/bin/wakeup-latency-record b/tools/perf/scripts/perl/bin/wakeup-latency-record index 9f2acaa..464251a 100644 --- a/tools/perf/scripts/perl/bin/wakeup-latency-record +++ b/tools/perf/scripts/perl/bin/wakeup-latency-record @@ -1,5 +1,5 @@ #!/bin/bash -perf record -a -e sched:sched_switch -e sched:sched_wakeup $@ +perf record -e sched:sched_switch -e sched:sched_wakeup $@ diff --git a/tools/perf/scripts/perl/bin/workqueue-stats-record b/tools/perf/scripts/perl/bin/workqueue-stats-record index 85301f2..8edda90 100644 --- a/tools/perf/scripts/perl/bin/workqueue-stats-record +++ b/tools/perf/scripts/perl/bin/workqueue-stats-record @@ -1,2 +1,2 @@ #!/bin/bash -perf record -a -e workqueue:workqueue_creation -e workqueue:workqueue_destruction -e workqueue:workqueue_execution -e workqueue:workqueue_insertion $@ +perf record -e workqueue:workqueue_creation -e workqueue:workqueue_destruction -e workqueue:workqueue_execution -e workqueue:workqueue_insertion $@ diff --git a/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record b/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record index eb5846b..8104895 100644 --- a/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record +++ b/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record @@ -1,2 +1,2 @@ #!/bin/bash -perf record -a -e raw_syscalls:sys_exit $@ +perf record -e raw_syscalls:sys_exit $@ diff --git a/tools/perf/scripts/python/bin/futex-contention-record b/tools/perf/scripts/python/bin/futex-contention-record index 5ecbb43..b1495c9 100644 --- a/tools/perf/scripts/python/bin/futex-contention-record +++ b/tools/perf/scripts/python/bin/futex-contention-record @@ -1,2 +1,2 @@ #!/bin/bash -perf record -a -e syscalls:sys_enter_futex -e syscalls:sys_exit_futex $@ +perf record -e syscalls:sys_enter_futex -e syscalls:sys_exit_futex $@ diff --git a/tools/perf/scripts/python/bin/netdev-times-record b/tools/perf/scripts/python/bin/netdev-times-record index d931a82..558754b 100644 --- a/tools/perf/scripts/python/bin/netdev-times-record +++ b/tools/perf/scripts/python/bin/netdev-times-record @@ -1,5 +1,5 @@ #!/bin/bash -perf record -a -e net:net_dev_xmit -e net:net_dev_queue \ +perf record -e net:net_dev_xmit -e net:net_dev_queue \ -e net:netif_receive_skb -e net:netif_rx \ -e skb:consume_skb -e skb:kfree_skb \ -e skb:skb_copy_datagram_iovec -e napi:napi_poll \ diff --git a/tools/perf/scripts/python/bin/sched-migration-record b/tools/perf/scripts/python/bin/sched-migration-record index 17a3e9b..7493fdd 100644 --- a/tools/perf/scripts/python/bin/sched-migration-record +++ b/tools/perf/scripts/python/bin/sched-migration-record @@ -1,2 +1,2 @@ #!/bin/bash -perf record -m 16384 -a -e sched:sched_wakeup -e sched:sched_wakeup_new -e sched:sched_switch -e sched:sched_migrate_task $@ +perf record -m 16384 -e sched:sched_wakeup -e sched:sched_wakeup_new -e sched:sched_switch -e sched:sched_migrate_task $@ diff --git a/tools/perf/scripts/python/bin/sctop-record b/tools/perf/scripts/python/bin/sctop-record index 1fc5998..4efbfaa 100644 --- a/tools/perf/scripts/python/bin/sctop-record +++ b/tools/perf/scripts/python/bin/sctop-record @@ -1,2 +1,2 @@ #!/bin/bash -perf record -a -e raw_syscalls:sys_enter $@ +perf record -e raw_syscalls:sys_enter $@ diff --git a/tools/perf/scripts/python/bin/syscall-counts-by-pid-record b/tools/perf/scripts/python/bin/syscall-counts-by-pid-record index 1fc5998..4efbfaa 100644 --- a/tools/perf/scripts/python/bin/syscall-counts-by-pid-record +++ b/tools/perf/scripts/python/bin/syscall-counts-by-pid-record @@ -1,2 +1,2 @@ #!/bin/bash -perf record -a -e raw_syscalls:sys_enter $@ +perf record -e raw_syscalls:sys_enter $@ diff --git a/tools/perf/scripts/python/bin/syscall-counts-record b/tools/perf/scripts/python/bin/syscall-counts-record index 1fc5998..4efbfaa 100644 --- a/tools/perf/scripts/python/bin/syscall-counts-record +++ b/tools/perf/scripts/python/bin/syscall-counts-record @@ -1,2 +1,2 @@ #!/bin/bash -perf record -a -e raw_syscalls:sys_enter $@ +perf record -e raw_syscalls:sys_enter $@ -- cgit v0.10.2 From bca647aac5067fec8dfcbf8ddb79a4c0d5afdfdd Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Wed, 10 Nov 2010 08:11:30 -0600 Subject: perf record: make the record options available outside perf record Other perf commands that invoke perf record, such as perf trace, may want to reuse the options used by perf record. This makes them non-static and renames them to avoid clashes with other 'options' variables. Signed-off-by: Tom Zanussi Acked-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 4e75583..93bd2ff 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -790,7 +790,7 @@ static const char * const record_usage[] = { static bool force, append_file; -static const struct option options[] = { +const struct option record_options[] = { OPT_CALLBACK('e', "event", NULL, "event", "event selector. use 'perf list' to list available events", parse_events), @@ -839,16 +839,16 @@ int cmd_record(int argc, const char **argv, const char *prefix __used) { int i, j, err = -ENOMEM; - argc = parse_options(argc, argv, options, record_usage, + argc = parse_options(argc, argv, record_options, record_usage, PARSE_OPT_STOP_AT_NON_OPTION); if (!argc && target_pid == -1 && target_tid == -1 && !system_wide && !cpu_list) - usage_with_options(record_usage, options); + usage_with_options(record_usage, record_options); if (force && append_file) { fprintf(stderr, "Can't overwrite and append at the same time." " You need to choose between -f and -A"); - usage_with_options(record_usage, options); + usage_with_options(record_usage, record_options); } else if (append_file) { write_mode = WRITE_APPEND; } else { @@ -871,7 +871,7 @@ int cmd_record(int argc, const char **argv, const char *prefix __used) if (thread_num <= 0) { fprintf(stderr, "Can't find all threads of pid %d\n", target_pid); - usage_with_options(record_usage, options); + usage_with_options(record_usage, record_options); } } else { all_tids=malloc(sizeof(pid_t)); -- cgit v0.10.2 From 34c86ea97ed811bb40ee4db63f710eb522162c77 Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Wed, 10 Nov 2010 08:15:43 -0600 Subject: perf trace record: handle commands correctly Because the perf-trace shell scripts hard-coded the use of the perf-record system-wide param, a perf trace record session was always system wide, even if it was given a command. If given a command, perf trace record now only records the events for the command, as users expect. If no command is given, or if the '-a' option is used, the recorded events are system-wide, as before. root@tropicana:~# perf trace record syscall-counts ls -al root@tropicana:~# perf trace ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0) ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0) root@tropicana:~# perf trace record syscall-counts -a ls -al root@tropicana:~# perf trace npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0) ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0) Signed-off-by: Tom Zanussi Acked-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index 368e624..0de7fcb 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -10,6 +10,7 @@ #include "util/symbol.h" #include "util/thread.h" #include "util/trace-event.h" +#include "util/parse-options.h" #include "util/util.h" static char const *script_name; @@ -17,6 +18,7 @@ static char const *generate_script_lang; static bool debug_mode; static u64 last_timestamp; static u64 nr_unordered; +extern const struct option record_options[]; static int default_start_script(const char *script __unused, int argc __unused, @@ -566,6 +568,20 @@ static const struct option options[] = { OPT_END() }; +static bool have_cmd(int argc, const char **argv) +{ + char **__argv = malloc(sizeof(const char *) * argc); + + if (!__argv) + die("malloc"); + memcpy(__argv, argv, sizeof(const char *) * argc); + argc = parse_options(argc, (const char **)__argv, record_options, + NULL, PARSE_OPT_STOP_AT_NON_OPTION); + free(__argv); + + return argc != 0; +} + int cmd_trace(int argc, const char **argv, const char *prefix __used) { struct perf_session *session; @@ -663,20 +679,28 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used) } if (suffix) { + bool system_wide = false; + int j = 0; + script_path = get_script_path(argv[2], suffix); if (!script_path) { fprintf(stderr, "script not found\n"); return -1; } + if (!strcmp(suffix, RECORD_SUFFIX)) + system_wide = !have_cmd(argc - 2, &argv[2]); + __argv = malloc((argc + 1) * sizeof(const char *)); if (!__argv) die("malloc"); - __argv[0] = "/bin/sh"; - __argv[1] = script_path; + __argv[j++] = "/bin/sh"; + __argv[j++] = script_path; + if (system_wide) + __argv[j++] = "-a"; for (i = 3; i < argc; i++) - __argv[i - 1] = argv[i]; - __argv[argc - 1] = NULL; + __argv[j++] = argv[i]; + __argv[j++] = NULL; execvp("/bin/sh", (char **)__argv); free(__argv); -- cgit v0.10.2 From b5b8731219ddd007c229feacbfe745d1be070e6a Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Wed, 10 Nov 2010 08:16:51 -0600 Subject: perf trace: live-mode command-line cleanup This patch attempts to make the perf trace command-line for live-mode commands more user-friendly and consistent with other perf commands. The main change it makes is to allow to be run as part of perf trace live-mode commands, as other perf commands do, instead of the system-wide traces they're currently hard-coded to by the shell scripts. With this patch, the following live-mode trace now works as expected: $ perf trace rw-by-pid ls -al The previous system-wide behavior for this command would still be available by explicitly specifying -a: $ perf trace rw-by-pid -a ls -al and if no is specified, the output is also system-wide: $ perf trace rw-by-pid Because live-mode requires both record and report steps to be invoked, it isn't always possible to know which args to send to the report and which to send to the record steps - mainly this is the case for report scripts with optional args - in those cases it would be necessary to use separate 'perf trace record' and 'perf trace report' steps. For example: $ perf trace syscall-counts ls Here we can't decide whether ls should be passed as a param to the syscall-counts script or whether we should invoke ls as a . In these cases, we just say that we'll ignore optional script params and always interpret the extra arguments as a . If the user instead wants the other interpretation, that can be accomplished by using separate record and report commands explicitly: $ perf trace record syscall-counts $ perf trace report syscall-counts ls So the rules that this patch implements, which seem to make the most intuitive sense for live-mode commands: - for commands with optional args and commands with no args, no args are sent to the report script, all are sent to the record step - for 'top' commands i.e. that end with 'top', can't be used - all extra args are send to the report script as params - for commands with required args, the n required args are taken to be the first n args after the script name and sent to the report script, and the rest are sent to the record step Signed-off-by: Tom Zanussi Acked-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index 0de7fcb..0483e28 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -330,7 +330,7 @@ static struct script_desc *script_desc__new(const char *name) { struct script_desc *s = zalloc(sizeof(*s)); - if (s != NULL) + if (s != NULL && name) s->name = strdup(name); return s; @@ -541,6 +541,34 @@ static char *get_script_path(const char *script_root, const char *suffix) return path; } +static bool is_top_script(const char *script_path) +{ + return ends_with((char *)script_path, "top") == NULL ? false : true; +} + +static int has_required_arg(char *script_path) +{ + struct script_desc *desc; + int n_args = 0; + char *p; + + desc = script_desc__new(NULL); + + if (read_script_info(desc, script_path)) + goto out; + + if (!desc->args) + goto out; + + for (p = desc->args; *p; p++) + if (*p == '<') + n_args++; +out: + script_desc__delete(desc); + + return n_args; +} + static const char * const trace_usage[] = { "perf trace [] ", NULL @@ -584,48 +612,65 @@ static bool have_cmd(int argc, const char **argv) int cmd_trace(int argc, const char **argv, const char *prefix __used) { + char *rec_script_path = NULL; + char *rep_script_path = NULL; struct perf_session *session; - const char *suffix = NULL; + char *script_path = NULL; const char **__argv; - char *script_path; - int i, err; + bool system_wide; + int i, j, err; - if (argc >= 2 && strncmp(argv[1], "rec", strlen("rec")) == 0) { - if (argc < 3) { - fprintf(stderr, - "Please specify a record script\n"); - return -1; - } - suffix = RECORD_SUFFIX; + setup_scripting(); + + argc = parse_options(argc, argv, options, trace_usage, + PARSE_OPT_STOP_AT_NON_OPTION); + + if (argc > 1 && !strncmp(argv[0], "rec", strlen("rec"))) { + rec_script_path = get_script_path(argv[1], RECORD_SUFFIX); + if (!rec_script_path) + return cmd_record(argc, argv, NULL); } - if (argc >= 2 && strncmp(argv[1], "rep", strlen("rep")) == 0) { - if (argc < 3) { + if (argc > 1 && !strncmp(argv[0], "rep", strlen("rep"))) { + rep_script_path = get_script_path(argv[1], REPORT_SUFFIX); + if (!rep_script_path) { fprintf(stderr, - "Please specify a report script\n"); + "Please specify a valid report script" + "(see 'perf trace -l' for listing)\n"); return -1; } - suffix = REPORT_SUFFIX; } /* make sure PERF_EXEC_PATH is set for scripts */ perf_set_argv_exec_path(perf_exec_path()); - if (!suffix && argc >= 2 && strncmp(argv[1], "-", strlen("-")) != 0) { - char *record_script_path, *report_script_path; + if (argc && !script_name && !rec_script_path && !rep_script_path) { int live_pipe[2]; + int rep_args; pid_t pid; - record_script_path = get_script_path(argv[1], RECORD_SUFFIX); - if (!record_script_path) { - fprintf(stderr, "record script not found\n"); - return -1; + rec_script_path = get_script_path(argv[0], RECORD_SUFFIX); + rep_script_path = get_script_path(argv[0], REPORT_SUFFIX); + + if (!rec_script_path && !rep_script_path) { + fprintf(stderr, " Couldn't find script %s\n\n See perf" + " trace -l for available scripts.\n", argv[0]); + usage_with_options(trace_usage, options); } - report_script_path = get_script_path(argv[1], REPORT_SUFFIX); - if (!report_script_path) { - fprintf(stderr, "report script not found\n"); - return -1; + if (is_top_script(argv[0])) { + rep_args = argc - 1; + } else { + int rec_args; + + rep_args = has_required_arg(rep_script_path); + rec_args = (argc - 1) - rep_args; + if (rec_args < 0) { + fprintf(stderr, " %s script requires options." + "\n\n See perf trace -l for available " + "scripts and options.\n", argv[0]); + usage_with_options(trace_usage, options); + } } if (pipe(live_pipe) < 0) { @@ -640,19 +685,30 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used) } if (!pid) { + system_wide = true; + j = 0; + dup2(live_pipe[1], 1); close(live_pipe[0]); - __argv = malloc(6 * sizeof(const char *)); + if (!is_top_script(argv[0])) + system_wide = !have_cmd(argc - rep_args, + &argv[rep_args]); + + __argv = malloc((argc + 6) * sizeof(const char *)); if (!__argv) die("malloc"); - __argv[0] = "/bin/sh"; - __argv[1] = record_script_path; - __argv[2] = "-q"; - __argv[3] = "-o"; - __argv[4] = "-"; - __argv[5] = NULL; + __argv[j++] = "/bin/sh"; + __argv[j++] = rec_script_path; + if (system_wide) + __argv[j++] = "-a"; + __argv[j++] = "-q"; + __argv[j++] = "-o"; + __argv[j++] = "-"; + for (i = rep_args + 1; i < argc; i++) + __argv[j++] = argv[i]; + __argv[j++] = NULL; execvp("/bin/sh", (char **)__argv); free(__argv); @@ -662,43 +718,43 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used) dup2(live_pipe[0], 0); close(live_pipe[1]); - __argv = malloc((argc + 3) * sizeof(const char *)); + __argv = malloc((argc + 4) * sizeof(const char *)); if (!__argv) die("malloc"); - __argv[0] = "/bin/sh"; - __argv[1] = report_script_path; - for (i = 2; i < argc; i++) - __argv[i] = argv[i]; - __argv[i++] = "-i"; - __argv[i++] = "-"; - __argv[i++] = NULL; + j = 0; + __argv[j++] = "/bin/sh"; + __argv[j++] = rep_script_path; + for (i = 1; i < rep_args + 1; i++) + __argv[j++] = argv[i]; + __argv[j++] = "-i"; + __argv[j++] = "-"; + __argv[j++] = NULL; execvp("/bin/sh", (char **)__argv); free(__argv); exit(-1); } - if (suffix) { - bool system_wide = false; - int j = 0; + if (rec_script_path) + script_path = rec_script_path; + if (rep_script_path) + script_path = rep_script_path; - script_path = get_script_path(argv[2], suffix); - if (!script_path) { - fprintf(stderr, "script not found\n"); - return -1; - } + if (script_path) { + system_wide = false; + j = 0; - if (!strcmp(suffix, RECORD_SUFFIX)) - system_wide = !have_cmd(argc - 2, &argv[2]); + if (rec_script_path) + system_wide = !have_cmd(argc - 1, &argv[1]); - __argv = malloc((argc + 1) * sizeof(const char *)); + __argv = malloc((argc + 2) * sizeof(const char *)); if (!__argv) die("malloc"); __argv[j++] = "/bin/sh"; __argv[j++] = script_path; if (system_wide) __argv[j++] = "-a"; - for (i = 3; i < argc; i++) + for (i = 2; i < argc; i++) __argv[j++] = argv[i]; __argv[j++] = NULL; @@ -707,11 +763,6 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used) exit(-1); } - setup_scripting(); - - argc = parse_options(argc, argv, options, trace_usage, - PARSE_OPT_STOP_AT_NON_OPTION); - if (symbol__init() < 0) return -1; if (!script_name) -- cgit v0.10.2 From d3c4f798ac4b7337b417467f36f4b2e6dcb49240 Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Wed, 10 Nov 2010 08:19:35 -0600 Subject: perf trace: update Documentation with new perf trace variants Add documentation describing new 'perf trace' command changes e.g. handling and live-mode/top variants. Signed-off-by: Tom Zanussi Acked-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/Documentation/perf-trace.txt b/tools/perf/Documentation/perf-trace.txt index 122ec9d..26aff6b 100644 --- a/tools/perf/Documentation/perf-trace.txt +++ b/tools/perf/Documentation/perf-trace.txt @@ -8,7 +8,11 @@ perf-trace - Read perf.data (created by perf record) and display trace output SYNOPSIS -------- [verse] -'perf trace' {record