From 513b6e1afaf81b42cacbb24ef1aa7eea5e9661c2 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Tue, 13 Sep 2005 01:25:33 -0700 Subject: [PATCH] SharpSL: Abstract c7x0 specifics from Corgi Touchscreen driver Separate out the Sharp Zaurus c7x0 series specific code from the Corgi Touchscreen driver. Use the new functions in corgi_lcd.c via sharpsl.h for hsync handling and pass the IRQ as a platform device resource. Move a function prototype into the w100fb header file where it belongs. This enables the driver to be used by the Zaurus cxx00 series. Signed-Off-by: Richard Purdie Cc: Vojtech Pavlik Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 3678d1e..fc428b8 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -130,12 +130,29 @@ static struct platform_device corgikbd_device = { /* * Corgi Touch Screen Device */ +static struct resource corgits_resources[] = { + [0] = { + .start = CORGI_IRQ_GPIO_TP_INT, + .end = CORGI_IRQ_GPIO_TP_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct corgits_machinfo corgi_ts_machinfo = { + .get_hsync_len = corgi_get_hsync_len, + .put_hsync = corgi_put_hsync, + .wait_hsync = corgi_wait_hsync, +}; + static struct platform_device corgits_device = { .name = "corgi-ts", .dev = { .parent = &corgissp_device.dev, + .platform_data = &corgi_ts_machinfo, }, .id = -1, + .num_resources = ARRAY_SIZE(corgits_resources), + .resource = corgits_resources, }; @@ -239,6 +256,7 @@ static void __init corgi_init(void) corgi_ssp_set_machinfo(&corgi_ssp_machinfo); pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT); + pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN); pxa_set_udc_info(&udc_info); pxa_set_mci_info(&corgi_mci_platform_data); diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 0489af5..21d55ed 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -24,17 +24,17 @@ config TOUCHSCREEN_BITSY module will be called h3600_ts_input. config TOUCHSCREEN_CORGI - tristate "Corgi touchscreen (for Sharp SL-C7xx)" + tristate "SharpSL (Corgi and Spitz series) touchscreen driver" depends on PXA_SHARPSL default y help Say Y here to enable the driver for the touchscreen on the - Sharp SL-C7xx series of PDAs. + Sharp SL-C7xx and SL-Cxx00 series of PDAs. If unsure, say N. To compile this driver as a module, choose M here: the - module will be called ads7846_ts. + module will be called corgi_ts. config TOUCHSCREEN_GUNZE tristate "Gunze AHL-51S touchscreen" diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c index 5d19261..4c7fbe5 100644 --- a/drivers/input/touchscreen/corgi_ts.c +++ b/drivers/input/touchscreen/corgi_ts.c @@ -1,5 +1,5 @@ /* - * Touchscreen driver for Sharp Corgi models (SL-C7xx) + * Touchscreen driver for Sharp SL-C7xx and SL-Cxx00 models * * Copyright (c) 2004-2005 Richard Purdie * @@ -19,7 +19,7 @@ #include #include -#include +#include #include #include @@ -47,15 +47,20 @@ struct corgi_ts { struct ts_event tc; int pendown; int power_mode; + int irq_gpio; + struct corgits_machinfo *machinfo; }; -#define STATUS_HSYNC (GPLR(CORGI_GPIO_HSYNC) & GPIO_bit(CORGI_GPIO_HSYNC)) - -#define SyncHS() while((STATUS_HSYNC) == 0); while((STATUS_HSYNC) != 0); +#ifdef CONFIG_PXA25x #define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C0, 0" : "=r"(a)) #define PMNC_GET(x) asm volatile ("mrc p14, 0, %0, C0, C0, 0" : "=r"(x)) #define PMNC_SET(x) asm volatile ("mcr p14, 0, %0, C0, C0, 0" : : "r"(x)) - +#endif +#ifdef CONFIG_PXA27x +#define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C1, 0" : "=r"(a)) +#define PMNC_GET(x) asm volatile ("mrc p14, 0, %0, C0, C1, 0" : "=r"(x)) +#define PMNC_SET(x) asm volatile ("mcr p14, 0, %0, C0, C1, 0" : : "r"(x)) +#endif /* ADS7846 Touch Screen Controller bit definitions */ #define ADSCTRL_PD0 (1u << 0) /* PD0 */ @@ -66,12 +71,11 @@ struct corgi_ts { #define ADSCTRL_STS (1u << 7) /* Start Bit */ /* External Functions */ -extern unsigned long w100fb_get_hsynclen(struct device *dev); extern unsigned int get_clk_frequency_khz(int info); -static unsigned long calc_waittime(void) +static unsigned long calc_waittime(struct corgi_ts *corgi_ts) { - unsigned long hsync_len = w100fb_get_hsynclen(&corgifb_device.dev); + unsigned long hsync_len = corgi_ts->machinfo->get_hsync_len(); if (hsync_len) return get_clk_frequency_khz(0)*1000/hsync_len; @@ -79,7 +83,8 @@ static unsigned long calc_waittime(void) return 0; } -static int sync_receive_data_send_cmd(int doRecive, int doSend, unsigned int address, unsigned long wait_time) +static int sync_receive_data_send_cmd(struct corgi_ts *corgi_ts, int doRecive, int doSend, + unsigned int address, unsigned long wait_time) { unsigned long timer1 = 0, timer2, pmnc = 0; int pos = 0; @@ -90,7 +95,7 @@ static int sync_receive_data_send_cmd(int doRecive, int doSend, unsigned int add PMNC_SET(0x01); /* polling HSync */ - SyncHS(); + corgi_ts->machinfo->wait_hsync(); /* get CCNT */ CCNT(timer1); } @@ -109,7 +114,7 @@ static int sync_receive_data_send_cmd(int doRecive, int doSend, unsigned int add CCNT(timer2); if (timer2-timer1 > wait_time) { /* too slow - timeout, try again */ - SyncHS(); + corgi_ts->machinfo->wait_hsync(); /* get OSCR */ CCNT(timer1); /* Wait after HSync */ @@ -133,23 +138,23 @@ static int read_xydata(struct corgi_ts *corgi_ts) /* critical section */ local_irq_save(flags); corgi_ssp_ads7846_lock(); - wait_time=calc_waittime(); + wait_time = calc_waittime(corgi_ts); /* Y-axis */ - sync_receive_data_send_cmd(0, 1, 1u, wait_time); + sync_receive_data_send_cmd(corgi_ts, 0, 1, 1u, wait_time); /* Y-axis */ - sync_receive_data_send_cmd(1, 1, 1u, wait_time); + sync_receive_data_send_cmd(corgi_ts, 1, 1, 1u, wait_time); /* X-axis */ - y = sync_receive_data_send_cmd(1, 1, 5u, wait_time); + y = sync_receive_data_send_cmd(corgi_ts, 1, 1, 5u, wait_time); /* Z1 */ - x = sync_receive_data_send_cmd(1, 1, 3u, wait_time); + x = sync_receive_data_send_cmd(corgi_ts, 1, 1, 3u, wait_time); /* Z2 */ - z1 = sync_receive_data_send_cmd(1, 1, 4u, wait_time); - z2 = sync_receive_data_send_cmd(1, 0, 4u, wait_time); + z1 = sync_receive_data_send_cmd(corgi_ts, 1, 1, 4u, wait_time); + z2 = sync_receive_data_send_cmd(corgi_ts, 1, 0, 4u, wait_time); /* Power-Down Enable */ corgi_ssp_ads7846_put((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); @@ -189,9 +194,9 @@ static void new_data(struct corgi_ts *corgi_ts, struct pt_regs *regs) static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer, struct pt_regs *regs) { - if ((GPLR(CORGI_GPIO_TP_INT) & GPIO_bit(CORGI_GPIO_TP_INT)) == 0) { + if ((GPLR(IRQ_TO_GPIO(corgi_ts->irq_gpio)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts->irq_gpio))) == 0) { /* Disable Interrupt */ - set_irq_type(CORGI_IRQ_GPIO_TP_INT, IRQT_NOEDGE); + set_irq_type(corgi_ts->irq_gpio, IRQT_NOEDGE); if (read_xydata(corgi_ts)) { corgi_ts->pendown = 1; new_data(corgi_ts, regs); @@ -210,7 +215,7 @@ static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer, struct pt_ } /* Enable Falling Edge */ - set_irq_type(CORGI_IRQ_GPIO_TP_INT, IRQT_FALLING); + set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); corgi_ts->pendown = 0; } } @@ -254,7 +259,7 @@ static int corgits_resume(struct device *dev, uint32_t level) corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); /* Enable Falling Edge */ - set_irq_type(CORGI_IRQ_GPIO_TP_INT, IRQT_FALLING); + set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); corgi_ts->power_mode = PWR_MODE_ACTIVE; } return 0; @@ -267,6 +272,7 @@ static int corgits_resume(struct device *dev, uint32_t level) static int __init corgits_probe(struct device *dev) { struct corgi_ts *corgi_ts; + struct platform_device *pdev = to_platform_device(dev); if (!(corgi_ts = kmalloc(sizeof(struct corgi_ts), GFP_KERNEL))) return -ENOMEM; @@ -275,6 +281,14 @@ static int __init corgits_probe(struct device *dev) memset(corgi_ts, 0, sizeof(struct corgi_ts)); + corgi_ts->machinfo = dev->platform_data; + corgi_ts->irq_gpio = platform_get_irq(pdev, 0); + + if (corgi_ts->irq_gpio < 0) { + kfree(corgi_ts); + return -ENODEV; + } + init_input_dev(&corgi_ts->input); corgi_ts->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); corgi_ts->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); @@ -293,8 +307,7 @@ static int __init corgits_probe(struct device *dev) corgi_ts->input.id.product = 0x0002; corgi_ts->input.id.version = 0x0100; - pxa_gpio_mode(CORGI_GPIO_TP_INT | GPIO_IN); - pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN); + pxa_gpio_mode(IRQ_TO_GPIO(corgi_ts->irq_gpio) | GPIO_IN); /* Initiaize ADS7846 Difference Reference mode */ corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); @@ -313,14 +326,14 @@ static int __init corgits_probe(struct device *dev) input_register_device(&corgi_ts->input); corgi_ts->power_mode = PWR_MODE_ACTIVE; - if (request_irq(CORGI_IRQ_GPIO_TP_INT, ts_interrupt, SA_INTERRUPT, "ts", corgi_ts)) { + if (request_irq(corgi_ts->irq_gpio, ts_interrupt, SA_INTERRUPT, "ts", corgi_ts)) { input_unregister_device(&corgi_ts->input); kfree(corgi_ts); return -EBUSY; } /* Enable Falling Edge */ - set_irq_type(CORGI_IRQ_GPIO_TP_INT, IRQT_FALLING); + set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); printk(KERN_INFO "input: Corgi Touchscreen Registered\n"); @@ -331,8 +344,9 @@ static int corgits_remove(struct device *dev) { struct corgi_ts *corgi_ts = dev_get_drvdata(dev); - free_irq(CORGI_IRQ_GPIO_TP_INT, NULL); + free_irq(corgi_ts->irq_gpio, NULL); del_timer_sync(&corgi_ts->timer); + corgi_ts->machinfo->put_hsync(); input_unregister_device(&corgi_ts->input); kfree(corgi_ts); return 0; diff --git a/include/video/w100fb.h b/include/video/w100fb.h index e6da2d7..677d403 100644 --- a/include/video/w100fb.h +++ b/include/video/w100fb.h @@ -19,6 +19,7 @@ struct w100fb_par; unsigned long w100fb_gpio_read(int port); void w100fb_gpio_write(int port, unsigned long value); +unsigned long w100fb_get_hsynclen(struct device *dev); /* LCD Specific Routines and Config */ struct w100_tg_info { -- cgit v0.10.2