From 68c3d93586223f7aeb04a815686b4d04146a2ada Mon Sep 17 00:00:00 2001 From: Colin Tuckley Date: Mon, 10 Nov 2008 14:10:11 +0000 Subject: RealView: Use the correct oscillator for the CLCD on PB1176 On PB1176, oscillator 0 rather than 4 should be used. Signed-off-by: Colin Tuckley Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 2f04d54..702d815 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -177,9 +178,14 @@ static const struct icst307_params realview_oscvco_params = { static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco) { void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET; - void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; + void __iomem *sys_osc; u32 val; + if (machine_is_realview_pb1176()) + sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET; + else + sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; + val = readl(sys_osc) & ~0x7ffff; val |= vco.v | (vco.r << 9) | (vco.s << 16); -- cgit v0.10.2 From c34a10255407c777bfd26160d7cf2b58b8dd0537 Mon Sep 17 00:00:00 2001 From: Colin Tuckley Date: Mon, 10 Nov 2008 14:10:12 +0000 Subject: RealView: Allow XVGA (1024x768) CLCD resolution on the RealView boards This patch adds another clcd_panel structure for the above resolution and makes it the default for the PB1176 and PB11MPCore platforms. Signed-off-by: Colin Tuckley Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 702d815..df5e677 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -236,6 +236,29 @@ static struct clcd_panel vga = { .bpp = 16, }; +static struct clcd_panel xvga = { + .mode = { + .name = "XVGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15748, + .left_margin = 152, + .right_margin = 48, + .upper_margin = 23, + .lower_margin = 3, + .hsync_len = 104, + .vsync_len = 4, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + static struct clcd_panel sanyo_3_8_in = { .mode = { .name = "Sanyo QVGA", @@ -314,9 +337,15 @@ static struct clcd_panel epson_2_2_in = { static struct clcd_panel *realview_clcd_panel(void) { void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; - struct clcd_panel *panel = &vga; + struct clcd_panel *vga_panel; + struct clcd_panel *panel; u32 val; + if (machine_is_realview_eb()) + vga_panel = &vga; + else + vga_panel = &xvga; + val = readl(sys_clcd) & SYS_CLCD_ID_MASK; if (val == SYS_CLCD_ID_SANYO_3_8) panel = &sanyo_3_8_in; @@ -325,11 +354,11 @@ static struct clcd_panel *realview_clcd_panel(void) else if (val == SYS_CLCD_ID_EPSON_2_2) panel = &epson_2_2_in; else if (val == SYS_CLCD_ID_VGA) - panel = &vga; + panel = vga_panel; else { printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val); - panel = &vga; + panel = vga_panel; } return panel; @@ -364,12 +393,18 @@ static void realview_clcd_enable(struct clcd_fb *fb) writel(val, sys_clcd); } -static unsigned long framesize = SZ_1M; - static int realview_clcd_setup(struct clcd_fb *fb) { + unsigned long framesize; dma_addr_t dma; + if (machine_is_realview_eb()) + /* VGA, 16bpp */ + framesize = 640 * 480 * 2; + else + /* XVGA, 16bpp */ + framesize = 1024 * 768 * 2; + fb->panel = realview_clcd_panel(); fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, -- cgit v0.10.2 From 4eccca20a3528804d6d4583f312fbb0d59b6540b Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 10 Nov 2008 14:10:13 +0000 Subject: RealView: Change the clcd panel controls to use RGB instead of BGR Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index df5e677..ccd3abd 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -232,7 +232,7 @@ static struct clcd_panel vga = { .width = -1, .height = -1, .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .bpp = 16, }; @@ -255,7 +255,7 @@ static struct clcd_panel xvga = { .width = -1, .height = -1, .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .bpp = 16, }; @@ -278,7 +278,7 @@ static struct clcd_panel sanyo_3_8_in = { .width = -1, .height = -1, .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .bpp = 16, }; @@ -301,7 +301,7 @@ static struct clcd_panel sanyo_2_5_in = { .width = -1, .height = -1, .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .bpp = 16, }; @@ -324,7 +324,7 @@ static struct clcd_panel epson_2_2_in = { .width = -1, .height = -1, .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .bpp = 16, }; -- cgit v0.10.2 From 2c0aec814d259e35366a0a22747f8c9d5e39ee9c Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 10 Nov 2008 14:10:13 +0000 Subject: RealView: Add debug-macro.S support for the PB1176 platform The UART0 address is different on PB1176 from EB or PB11MPCore. This patch adds the necessary #ifdef's to this file. The disadvantage is that enabling CONFIG_DEBUG_LL will work properly on PB1176 if only this platform is enabled. Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index 7196bca..d0076ca 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -8,15 +8,35 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * -*/ + */ + +#if defined(CONFIG_MACH_REALVIEW_EB) || \ + defined(CONFIG_MACH_REALVIEW_PB11MP) +#ifndef DEBUG_LL_UART_OFFSET +#define DEBUG_LL_UART_OFFSET 0x00009000 +#elif DEBUG_LL_UART_OFFSET != 0x00009000 +#warning "DEBUG_LL_UART_OFFSET already defined to a different value" +#endif +#endif + +#ifdef CONFIG_MACH_REALVIEW_PB1176 +#ifndef DEBUG_LL_UART_OFFSET +#define DEBUG_LL_UART_OFFSET 0x0010c000 +#elif DEBUG_LL_UART_OFFSET != 0x0010c000 +#warning "DEBUG_LL_UART_OFFSET already defined to a different value" +#endif +#endif + +#ifndef DEBUG_LL_UART_OFFSET +#error "Unknown RealView platform" +#endif .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? moveq \rx, #0x10000000 movne \rx, #0xf0000000 @ virtual base - orr \rx, \rx, #0x00009000 + orr \rx, \rx, #DEBUG_LL_UART_OFFSET .endm #include -- cgit v0.10.2 From 877d1f338912c1bf49a026eeca1d411755efece5 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 10 Nov 2008 14:10:14 +0000 Subject: RealView: Make more vmalloc space by changing IO_ADDRESS Since boards like PB11MPCore have 512MB of RAM and 128MB of flash, the virtual space is short on vmalloc memory and mapping the flash fails. This patch changes the IO_ADDRESS so that static mappings start at 0xfc000000 and moves the PCI virtual addresses higher up. The new VMALLOC_END is set to 0xf8000000 (512MB higher than the old value). Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index d0076ca..f072d88 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -35,7 +35,7 @@ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? moveq \rx, #0x10000000 - movne \rx, #0xf0000000 @ virtual base + movne \rx, #0xfb000000 @ virtual base orr \rx, \rx, #DEBUG_LL_UART_OFFSET .endm diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h index 79a93b3..b42c14f 100644 --- a/arch/arm/mach-realview/include/mach/hardware.h +++ b/arch/arm/mach-realview/include/mach/hardware.h @@ -25,7 +25,14 @@ #include /* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) (((x) & 0x0fffffff) + 0xf0000000) +/* + * Statically mapped addresses: + * + * 10xx xxxx -> fbxx xxxx + * 1exx xxxx -> fdxx xxxx + * 1fxx xxxx -> fexx xxxx + */ +#define IO_ADDRESS(x) (((x) & 0x03ffffff) + 0xfb000000) #define __io_address(n) __io(IO_ADDRESS(n)) #endif diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h index 48cbcc87..fe0de1b 100644 --- a/arch/arm/mach-realview/include/mach/vmalloc.h +++ b/arch/arm/mach-realview/include/mach/vmalloc.h @@ -18,4 +18,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) +#define VMALLOC_END 0xf8000000 -- cgit v0.10.2 From 70bb62f8ecdda2d172b05d33b0e6750e3fe6d1c7 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 1 Dec 2008 14:54:55 +0000 Subject: RealView: Allow PHYS_OFFSET at 0x70000000 RealView boards like PB11MPCore have 512MB of RAM available contiguously at 0x70000000. Half of the memory is mirrored at 0x00000000 for backwards compatibility. This patch adds the CONFIG_REALVIEW_HIGH_PHYS_OFFSET option option to change the physical base address so that the full amount of RAM is available to Linux. Note that the EB board has 256MB of RAM also mirrored at 0x70000000, the only board without this feature being PB1176. Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 5ccde7c..6695fb3 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -37,4 +37,15 @@ config MACH_REALVIEW_PB1176 help Include support for the ARM(R) RealView ARM1176 Platform Baseboard. +config REALVIEW_HIGH_PHYS_OFFSET + bool "High physical base address for the RealView platform" + depends on !MACH_REALVIEW_PB1176 + default y + help + RealView boards other than PB1176 have the RAM available at + 0x70000000, 256MB of which being mirrored at 0x00000000. If + the board supports 512MB of RAM, this option allows the + memory to be accessed contiguously at the high physical + offset. + endmenu diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot index c7e75ac..d97e003 100644 --- a/arch/arm/mach-realview/Makefile.boot +++ b/arch/arm/mach-realview/Makefile.boot @@ -1,4 +1,9 @@ +ifeq ($(CONFIG_REALVIEW_HIGH_PHYS_OFFSET),y) + zreladdr-y := 0x70008000 +params_phys-y := 0x70000100 +initrd_phys-y := 0x70800000 +else zreladdr-y := 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 - +endif diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 0e67348..759ed10 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -23,7 +23,11 @@ /* * Physical DRAM offset. */ +#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET +#define PHYS_OFFSET UL(0x70000000) +#else #define PHYS_OFFSET UL(0x00000000) +#endif /* * Virtual view <-> DMA view memory address translations diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index eb829eb..f6e04ed 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -392,7 +392,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .phys_io = REALVIEW_EB_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc, - .boot_params = 0x00000100, + .boot_params = PHYS_OFFSET + 0x00000100, .map_io = realview_eb_map_io, .init_irq = gic_init_irq, .timer = &realview_eb_timer, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index cccdb3e..a9fac65 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -284,7 +284,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .phys_io = REALVIEW_PB1176_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc, - .boot_params = 0x00000100, + .boot_params = PHYS_OFFSET + 0x00000100, .map_io = realview_pb1176_map_io, .init_irq = gic_init_irq, .timer = &realview_pb1176_timer, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 8b86314..8a27cd0 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -334,7 +334,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .phys_io = REALVIEW_PB11MP_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc, - .boot_params = 0x00000100, + .boot_params = PHYS_OFFSET + 0x00000100, .map_io = realview_pb11mp_map_io, .init_irq = gic_init_irq, .timer = &realview_pb11mp_timer, -- cgit v0.10.2 From e7c70825a758403cfb476903f3145e6a8c0dd3b5 Mon Sep 17 00:00:00 2001 From: Bahadir Balban Date: Mon, 1 Dec 2008 14:54:55 +0000 Subject: RealView: Add support for the Cortex-A8 Platform Baseboard This patch adds support for RealView/PB-A8, a platform based on Cortex-A8 with support for PCI-E and compact flash. Signed-off-by: Bahadir Balban Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 6695fb3..8032f23 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -37,6 +37,15 @@ config MACH_REALVIEW_PB1176 help Include support for the ARM(R) RealView ARM1176 Platform Baseboard. +config MACH_REALVIEW_PBA8 + bool "Support RealView/PB-A8 platform" + select CPU_V7 + select ARM_GIC + help + Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard. + PB-A8 is a platform with an on-board Cortex-A8 and has support for + PCI-E and Compact Flash. + config REALVIEW_HIGH_PHYS_OFFSET bool "High physical base address for the RealView platform" depends on !MACH_REALVIEW_PB1176 diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index d2ae077..7bea8ff 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -6,5 +6,6 @@ obj-y := core.o clock.o obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o +obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h new file mode 100644 index 0000000..c8bed8f --- /dev/null +++ b/arch/arm/mach-realview/include/mach/board-pba8.h @@ -0,0 +1,152 @@ +/* + * include/asm-arm/arch-realview/board-pba8.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_PBA8_H +#define __ASM_ARCH_BOARD_PBA8_H + +#include + +/* + * Peripheral addresses + */ +#define REALVIEW_PBA8_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_PBA8_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_PBA8_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_PBA8_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_PBA8_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_PBA8_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ +#define REALVIEW_PBA8_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_PBA8_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_PBA8_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_PBA8_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_PBA8_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_PBA8_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ +#define REALVIEW_PBA8_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ +#define REALVIEW_PBA8_SCTL_BASE 0x1001A000 /* System Controller */ +#define REALVIEW_PBA8_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_PBA8_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ +#define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */ +#define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */ +#define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */ +#define REALVIEW_PBA8_CF_BASE 0x18000000 /* Compact flash */ +#define REALVIEW_PBA8_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */ +#define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_PBA8_FLASH0_BASE 0x40000000 +#define REALVIEW_PBA8_FLASH0_SIZE SZ_64M +#define REALVIEW_PBA8_FLASH1_BASE 0x44000000 +#define REALVIEW_PBA8_FLASH1_SIZE SZ_64M +#define REALVIEW_PBA8_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_PBA8_USB_BASE 0x4F000000 /* USB */ +#define REALVIEW_PBA8_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ +#define REALVIEW_PBA8_LT_BASE 0xC0000000 /* Logic Tile expansion */ +#define REALVIEW_PBA8_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ +#define REALVIEW_PBA8_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ + +#define REALVIEW_PBA8_SYS_PLD_CTRL1 0x74 + +/* + * PBA8 PCI regions + */ +#define REALVIEW_PBA8_PCI_BASE 0x90040000 /* PCI-X Unit base */ +#define REALVIEW_PBA8_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ +#define REALVIEW_PBA8_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ + +#define REALVIEW_PBA8_PCI_BASE_SIZE 0x10000 /* 16 Kb */ +#define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */ +#define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */ + +/* + * Irqs + */ +#define IRQ_PBA8_GIC_START 32 + +/* L220 +#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29) +#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30) +#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31) +*/ + +/* + * PB-A8 on-board gic irq sources + */ +#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */ +#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */ +#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */ +#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */ +#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */ +#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */ +#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */ +#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */ +#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */ +#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */ +#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ + +/* ... */ +#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) +#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) +#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52) +#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53) + +#define IRQ_PBA8_SMC -1 +#define IRQ_PBA8_SCTL -1 + +#define NR_GIC_PBA8 1 + +/* + * Only define NR_IRQS if less than NR_IRQS_PBA8 + */ +#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64) + +#if defined(CONFIG_MACH_REALVIEW_PBA8) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PBA8 +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PBA8 +#endif + +#endif /* CONFIG_MACH_REALVIEW_PBA8 */ + +#endif /* __ASM_ARCH_BOARD_PBA8_H */ diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index f072d88..92dbcb9 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -11,7 +11,8 @@ */ #if defined(CONFIG_MACH_REALVIEW_EB) || \ - defined(CONFIG_MACH_REALVIEW_PB11MP) + defined(CONFIG_MACH_REALVIEW_PB11MP) || \ + defined(CONFIG_MACH_REALVIEW_PBA8) #ifndef DEBUG_LL_UART_OFFSET #define DEBUG_LL_UART_OFFSET 0x00009000 #elif DEBUG_LL_UART_OFFSET != 0x00009000 diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h index 02a9185..fe5cb98 100644 --- a/arch/arm/mach-realview/include/mach/irqs.h +++ b/arch/arm/mach-realview/include/mach/irqs.h @@ -25,6 +25,7 @@ #include #include #include +#include #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h index 79f50f2..415d634 100644 --- a/arch/arm/mach-realview/include/mach/uncompress.h +++ b/arch/arm/mach-realview/include/mach/uncompress.h @@ -23,6 +23,7 @@ #include #include #include +#include #define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) #define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) @@ -40,6 +41,8 @@ static inline unsigned long get_uart_base(void) return REALVIEW_PB11MP_UART0_BASE; else if (machine_is_realview_pb1176()) return REALVIEW_PB1176_UART0_BASE; + else if (machine_is_realview_pba8()) + return REALVIEW_PBA8_UART0_BASE; else return 0; } diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c new file mode 100644 index 0000000..0c237e9 --- /dev/null +++ b/arch/arm/mach-realview/realview_pba8.c @@ -0,0 +1,307 @@ +/* + * linux/arch/arm/mach-realview/realview_pba8.c + * + * Copyright (C) 2008 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include "core.h" +#include "clock.h" + +static struct map_desc realview_pba8_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), + .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBA8_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBA8_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBA8_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBA8_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), + .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBA8_TIMER0_1_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBA8_TIMER0_1_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PBA8_TIMER2_3_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBA8_TIMER2_3_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#ifdef CONFIG_PCI + { + .virtual = PCIX_UNIT_BASE, + .pfn = __phys_to_pfn(REALVIEW_PBA8_PCI_BASE), + .length = REALVIEW_PBA8_PCI_BASE_SIZE, + .type = MT_DEVICE + }, +#endif +#ifdef CONFIG_DEBUG_LL + { + .virtual = IO_ADDRESS(REALVIEW_PBA8_UART0_BASE), + .pfn = __phys_to_pfn(REALVIEW_PBA8_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#endif +}; + +static void __init realview_pba8_map_io(void) +{ + iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc)); +} + +/* + * RealView PBA8Core AMBA devices + */ + +#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ } +#define GPIO2_DMA { 0, 0 } +#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ } +#define GPIO3_DMA { 0, 0 } +#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ } +#define AACI_DMA { 0x80, 0x81 } +#define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B } +#define MMCI0_DMA { 0x84, 0 } +#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ } +#define KMI0_DMA { 0, 0 } +#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ } +#define KMI1_DMA { 0, 0 } +#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ } +#define PBA8_SMC_DMA { 0, 0 } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_DMA { 0, 0 } +#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ } +#define PBA8_CLCD_DMA { 0, 0 } +#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ } +#define DMAC_DMA { 0, 0 } +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define SCTL_DMA { 0, 0 } +#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ } +#define PBA8_WATCHDOG_DMA { 0, 0 } +#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ } +#define PBA8_GPIO0_DMA { 0, 0 } +#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ } +#define GPIO1_DMA { 0, 0 } +#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ } +#define PBA8_RTC_DMA { 0, 0 } +#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ } +#define SCI_DMA { 7, 6 } +#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ } +#define PBA8_UART0_DMA { 15, 14 } +#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ } +#define PBA8_UART1_DMA { 13, 12 } +#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ } +#define PBA8_UART2_DMA { 11, 10 } +#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ } +#define PBA8_UART3_DMA { 0x86, 0x87 } +#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ } +#define PBA8_SSP_DMA { 9, 8 } + +/* FPGA Primecells */ +AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:09", PBA8_UART3, NULL); + +/* DevChip Primecells */ +AMBA_DEVICE(smc, "dev:00", PBA8_SMC, NULL); +AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:e1", PBA8_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, NULL); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(rtc, "dev:e8", PBA8_RTC, NULL); +AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:f1", PBA8_UART0, NULL); +AMBA_DEVICE(uart1, "dev:f2", PBA8_UART1, NULL); +AMBA_DEVICE(uart2, "dev:f3", PBA8_UART2, NULL); +AMBA_DEVICE(ssp0, "dev:f4", PBA8_SSP, NULL); + +/* Primecells on the NEC ISSP chip */ +AMBA_DEVICE(clcd, "issp:20", PBA8_CLCD, &clcd_plat_data); +AMBA_DEVICE(dmac, "issp:30", DMAC, NULL); + +static struct amba_device *amba_devs[] __initdata = { + &dmac_device, + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, + &smc_device, + &clcd_device, + &sctl_device, + &wdog_device, + &gpio0_device, + &gpio1_device, + &gpio2_device, + &rtc_device, + &sci0_device, + &ssp0_device, + &aaci_device, + &mmc0_device, + &kmi0_device, + &kmi1_device, +}; + +/* + * RealView PB-A8 platform devices + */ +static struct resource realview_pba8_flash_resource[] = { + [0] = { + .start = REALVIEW_PBA8_FLASH0_BASE, + .end = REALVIEW_PBA8_FLASH0_BASE + REALVIEW_PBA8_FLASH0_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = REALVIEW_PBA8_FLASH1_BASE, + .end = REALVIEW_PBA8_FLASH1_BASE + REALVIEW_PBA8_FLASH1_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource realview_pba8_smsc911x_resources[] = { + [0] = { + .start = REALVIEW_PBA8_ETH_BASE, + .end = REALVIEW_PBA8_ETH_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PBA8_ETH, + .end = IRQ_PBA8_ETH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device realview_pba8_smsc911x_device = { + .name = "smc911x", + .id = 0, + .num_resources = ARRAY_SIZE(realview_pba8_smsc911x_resources), + .resource = realview_pba8_smsc911x_resources, +}; + +struct resource realview_pba8_cf_resources[] = { + [0] = { + .start = REALVIEW_PBA8_CF_BASE, + .end = REALVIEW_PBA8_CF_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = REALVIEW_PBA8_CF_MEM_BASE, + .end = REALVIEW_PBA8_CF_MEM_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = -1, /* FIXME: Find correct irq */ + .end = -1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device realview_pba8_cf_device = { + .name = "compactflash", + .id = 0, + .num_resources = ARRAY_SIZE(realview_pba8_cf_resources), + .resource = realview_pba8_cf_resources, +}; + +static void __init gic_init_irq(void) +{ + /* ARM PB-A8 on-board GIC */ + gic_cpu_base_addr = __io_address(REALVIEW_PBA8_GIC_CPU_BASE); + gic_dist_init(0, __io_address(REALVIEW_PBA8_GIC_DIST_BASE), IRQ_PBA8_GIC_START); + gic_cpu_init(0, __io_address(REALVIEW_PBA8_GIC_CPU_BASE)); +} + +static void __init realview_pba8_timer_init(void) +{ + timer0_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE); + timer1_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE) + 0x20; + timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE); + timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20; + + realview_timer_init(IRQ_PBA8_TIMER0_1); +} + +static struct sys_timer realview_pba8_timer = { + .init = realview_pba8_timer_init, +}; + +static void __init realview_pba8_init(void) +{ + int i; + + realview_flash_register(realview_pba8_flash_resource, + ARRAY_SIZE(realview_pba8_flash_resource)); + platform_device_register(&realview_pba8_smsc911x_device); + platform_device_register(&realview_i2c_device); + platform_device_register(&realview_pba8_cf_device); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + +#ifdef CONFIG_LEDS + leds_event = realview_leds_event; +#endif +} + +MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_io = REALVIEW_PBA8_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x00000100, + .map_io = realview_pba8_map_io, + .init_irq = gic_init_irq, + .timer = &realview_pba8_timer, + .init_machine = realview_pba8_init, +MACHINE_END -- cgit v0.10.2 From 8aa2da872a492a2196397603ed756a4c48677122 Mon Sep 17 00:00:00 2001 From: Harry Fearnhamm Date: Mon, 1 Dec 2008 14:54:56 +0000 Subject: RealView: Use flush_cache_all() rather than MCR in cpu_enter_lowpower() The MCR for flushing the whole D cache is undefined on ARMv7 CPUs. Signed-off-by: Harry Fearnhamm Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index 09748cb..be048e3 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -13,6 +13,8 @@ #include #include +#include + extern volatile int pen_release; static DECLARE_COMPLETION(cpu_killed); @@ -21,7 +23,8 @@ static inline void cpu_enter_lowpower(void) { unsigned int v; - asm volatile( "mcr p15, 0, %1, c7, c14, 0\n" + flush_cache_all(); + asm volatile( " mcr p15, 0, %1, c7, c5, 0\n" " mcr p15, 0, %1, c7, c10, 4\n" /* -- cgit v0.10.2 From 4c3ea3717103ffcccfaebedb98c2dadfb54e0482 Mon Sep 17 00:00:00 2001 From: Jon Callan Date: Mon, 1 Dec 2008 14:54:56 +0000 Subject: RealView: Add Cortex-A9 support to the EB board This patch adds the necessary definitions and Kconfig entries to enable Cortex-A9 (ARMv7 SMP) tiles on the RealView/EB board. Signed-off-by: Jon Callan Signed-off-by: Catalin Marinas diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5021db2..fc022f0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -782,7 +782,7 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" - depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) + depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP) default y help Enable support for local timers on SMP platforms, rather then the diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 8032f23..eebf7ec 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -7,6 +7,13 @@ config MACH_REALVIEW_EB help Include support for the ARM(R) RealView Emulation Baseboard platform. +config REALVIEW_EB_A9MP + bool "Support Multicore Cortex-A9" + depends on MACH_REALVIEW_EB + select CPU_V7 + help + Enable support for the Cortex-A9MPCore tile on the Realview platform. + config REALVIEW_EB_ARM11MP bool "Support ARM11MPCore tile" depends on MACH_REALVIEW_EB diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h index 8d699fd..e1a6df2 100644 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ b/arch/arm/mach-realview/include/mach/board-eb.h @@ -163,7 +163,7 @@ #define NR_IRQS NR_IRQS_EB #endif -#if defined(CONFIG_REALVIEW_EB_ARM11MP) \ +#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \ && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) #undef MAX_GIC_NR #define MAX_GIC_NR NR_GIC_EB11MP @@ -177,6 +177,7 @@ #define REALVIEW_EB_PROC_ARM9 0x02000000 #define REALVIEW_EB_PROC_ARM11 0x04000000 #define REALVIEW_EB_PROC_ARM11MP 0x06000000 +#define REALVIEW_EB_PROC_A9MP 0x0C000000 #define check_eb_proc(proc_type) \ ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \ @@ -188,4 +189,10 @@ #define core_tile_eb11mp() 0 #endif +#ifdef CONFIG_REALVIEW_EB_A9MP +#define core_tile_a9mp() check_eb_proc(REALVIEW_EB_PROC_A9MP) +#else +#define core_tile_a9mp() 0 +#endif + #endif /* __ASM_ARCH_BOARD_EB_H */ diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index e102aeb..8dcb085 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -36,7 +36,8 @@ static unsigned int __init get_core_count(void) unsigned int ncores; void __iomem *scu_base = 0; - if (machine_is_realview_eb() && core_tile_eb11mp()) + if (machine_is_realview_eb() && + (core_tile_eb11mp() || core_tile_a9mp())) scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE); else if (machine_is_realview_pb11mp()) scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE); @@ -58,7 +59,8 @@ static void scu_enable(void) u32 scu_ctrl; void __iomem *scu_base; - if (machine_is_realview_eb() && core_tile_eb11mp()) + if (machine_is_realview_eb() && + (core_tile_eb11mp() || core_tile_a9mp())) scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE); else if (machine_is_realview_pb11mp()) scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE); @@ -88,7 +90,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - if (machine_is_realview_eb() && core_tile_eb11mp()) + if (machine_is_realview_eb() && + (core_tile_eb11mp() || core_tile_a9mp())) gic_cpu_init(0, __io_address(REALVIEW_EB11MP_GIC_CPU_BASE)); else if (machine_is_realview_pb11mp()) gic_cpu_init(0, __io_address(REALVIEW_TC11MP_GIC_CPU_BASE)); @@ -232,7 +235,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in * realview_timer_init */ - if ((machine_is_realview_eb() && core_tile_eb11mp()) || + if ((machine_is_realview_eb() && + (core_tile_eb11mp() || core_tile_a9mp())) || machine_is_realview_pb11mp()) local_timer_setup(cpu); #endif diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index f6e04ed..3adb535 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -108,7 +108,7 @@ static struct map_desc realview_eb11mp_io_desc[] __initdata = { static void __init realview_eb_map_io(void) { iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc)); - if (core_tile_eb11mp()) + if (core_tile_eb11mp() || core_tile_a9mp()) iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc)); } @@ -274,7 +274,7 @@ static int eth_device_register(void) static void __init gic_init_irq(void) { - if (core_tile_eb11mp()) { + if (core_tile_eb11mp() || core_tile_a9mp()) { unsigned int pldctrl; /* new irq mode */ @@ -342,7 +342,7 @@ static void __init realview_eb_timer_init(void) timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE); timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20; - if (core_tile_eb11mp()) { + if (core_tile_eb11mp() || core_tile_a9mp()) { #ifdef CONFIG_LOCAL_TIMERS twd_base_addr = __io_address(REALVIEW_EB11MP_TWD_BASE); twd_size = REALVIEW_EB11MP_TWD_SIZE; @@ -362,7 +362,7 @@ static void __init realview_eb_init(void) { int i; - if (core_tile_eb11mp()) { + if (core_tile_eb11mp() || core_tile_a9mp()) { realview_eb11mp_fixup(); #ifdef CONFIG_CACHE_L2X0 diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index ab5f7a2..37f7106 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -745,7 +745,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" - depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 + depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || REALVIEW_EB_A9MP default y select OUTER_CACHE help -- cgit v0.10.2 From ebac6546df7e8bd17f66f029c616ea9ee3c595ae Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 1 Dec 2008 14:54:57 +0000 Subject: RealView: Use only the shadow mapping of ARM11MPCore local timers All the cases where the local timer for a CPU is accessed happen on the corresponding current CPU, hence no need to access the per-CPU local timer mappings. Signed-off-by: Catalin Marinas diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 727b5c0..fad70da 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -114,7 +114,7 @@ extern void local_timer_interrupt(void); /* * Stop a local timer interrupt. */ -extern void local_timer_stop(unsigned int cpu); +extern void local_timer_stop(void); /* * Platform provides this to acknowledge a local timer IRQ @@ -123,7 +123,7 @@ extern int local_timer_ack(void); #else -static inline void local_timer_stop(unsigned int cpu) +static inline void local_timer_stop(void) { } @@ -132,7 +132,7 @@ static inline void local_timer_stop(unsigned int cpu) /* * Setup a local timer interrupt for a CPU. */ -extern void local_timer_setup(unsigned int cpu); +extern void local_timer_setup(void); /* * show local interrupt info diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index e42a749..019237d 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -181,7 +181,7 @@ int __cpuexit __cpu_disable(void) /* * Stop the local timer for this CPU. */ - local_timer_stop(cpu); + local_timer_stop(); /* * Flush user cache and TLB mappings, and then remove this CPU @@ -284,7 +284,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void) /* * Setup local timer for this CPU. */ - local_timer_setup(cpu); + local_timer_setup(); calibrate_delay(); diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index ccd3abd..b627992 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -629,7 +629,7 @@ void __init realview_timer_init(unsigned int timer_irq) * The dummy clock device has to be registered before the main device * so that the latter will broadcast the clock events */ - local_timer_setup(smp_processor_id()); + local_timer_setup(); #endif /* diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 3cea92c..3d97a4c 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -52,8 +52,7 @@ extern struct clk realview_clcd_clk; extern struct clcd_board clcd_plat_data; extern void __iomem *gic_cpu_base_addr; #ifdef CONFIG_LOCAL_TIMERS -extern void __iomem *twd_base_addr; -extern unsigned int twd_size; +extern void __iomem *twd_base; #endif extern void __iomem *timer0_va_base; extern void __iomem *timer1_va_base; diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h index e1a6df2..cdbf551 100644 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ b/arch/arm/mach-realview/include/mach/board-eb.h @@ -49,16 +49,14 @@ #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB #define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */ #define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x10100700 -#define REALVIEW_EB11MP_TWD_SIZE 0x00000100 +#define REALVIEW_EB11MP_TWD_BASE 0x10100600 #define REALVIEW_EB11MP_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */ #define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ #else #define REALVIEW_EB11MP_SCU_BASE 0x1F000000 /* SCU registers */ #define REALVIEW_EB11MP_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x1F000700 -#define REALVIEW_EB11MP_TWD_SIZE 0x00000100 +#define REALVIEW_EB11MP_TWD_BASE 0x1F000600 #define REALVIEW_EB11MP_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */ #define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h index ecd80e5..53ea0e7 100644 --- a/arch/arm/mach-realview/include/mach/board-pb11mp.h +++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h @@ -77,8 +77,7 @@ */ #define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */ #define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */ -#define REALVIEW_TC11MP_TWD_BASE 0x1F000700 -#define REALVIEW_TC11MP_TWD_SIZE 0x00000100 +#define REALVIEW_TC11MP_TWD_BASE 0x1F000600 #define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ #define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index 44d178c..9019ef2 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -38,18 +38,14 @@ void local_timer_interrupt(void) #ifdef CONFIG_LOCAL_TIMERS -#define TWD_BASE(cpu) (twd_base_addr + (cpu) * twd_size) - /* set up by the platform code */ -void __iomem *twd_base_addr; -unsigned int twd_size; +void __iomem *twd_base; static unsigned long mpcore_timer_rate; static void local_timer_set_mode(enum clock_event_mode mode, struct clock_event_device *clk) { - void __iomem *base = TWD_BASE(smp_processor_id()); unsigned long ctrl; switch(mode) { @@ -68,17 +64,16 @@ static void local_timer_set_mode(enum clock_event_mode mode, ctrl = 0; } - __raw_writel(ctrl, base + TWD_TIMER_CONTROL); + __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL); } static int local_timer_set_next_event(unsigned long evt, struct clock_event_device *unused) { - void __iomem *base = TWD_BASE(smp_processor_id()); - unsigned long ctrl = __raw_readl(base + TWD_TIMER_CONTROL); + unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); - __raw_writel(evt, base + TWD_TIMER_COUNTER); - __raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, base + TWD_TIMER_CONTROL); + __raw_writel(evt, twd_base + TWD_TIMER_COUNTER); + __raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL); return 0; } @@ -91,19 +86,16 @@ static int local_timer_set_next_event(unsigned long evt, */ int local_timer_ack(void) { - void __iomem *base = TWD_BASE(smp_processor_id()); - - if (__raw_readl(base + TWD_TIMER_INTSTAT)) { - __raw_writel(1, base + TWD_TIMER_INTSTAT); + if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) { + __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); return 1; } return 0; } -static void __cpuinit twd_calibrate_rate(unsigned int cpu) +static void __cpuinit twd_calibrate_rate(void) { - void __iomem *base = TWD_BASE(cpu); unsigned long load, count; u64 waitjiffies; @@ -124,15 +116,15 @@ static void __cpuinit twd_calibrate_rate(unsigned int cpu) waitjiffies += 5; /* enable, no interrupt or reload */ - __raw_writel(0x1, base + TWD_TIMER_CONTROL); + __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL); /* maximum value */ - __raw_writel(0xFFFFFFFFU, base + TWD_TIMER_COUNTER); + __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER); while (get_jiffies_64() < waitjiffies) udelay(10); - count = __raw_readl(base + TWD_TIMER_COUNTER); + count = __raw_readl(twd_base + TWD_TIMER_COUNTER); mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); @@ -142,18 +134,19 @@ static void __cpuinit twd_calibrate_rate(unsigned int cpu) load = mpcore_timer_rate / HZ; - __raw_writel(load, base + TWD_TIMER_LOAD); + __raw_writel(load, twd_base + TWD_TIMER_LOAD); } /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(unsigned int cpu) +void __cpuinit local_timer_setup(void) { + unsigned int cpu = smp_processor_id(); struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); unsigned long flags; - twd_calibrate_rate(cpu); + twd_calibrate_rate(); clk->name = "local_timer"; clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; @@ -178,9 +171,9 @@ void __cpuinit local_timer_setup(unsigned int cpu) /* * take a local timer down */ -void __cpuexit local_timer_stop(unsigned int cpu) +void __cpuexit local_timer_stop(void) { - __raw_writel(0, TWD_BASE(cpu) + TWD_TIMER_CONTROL); + __raw_writel(0, twd_base + TWD_TIMER_CONTROL); } #else /* CONFIG_LOCAL_TIMERS */ @@ -190,8 +183,9 @@ static void dummy_timer_set_mode(enum clock_event_mode mode, { } -void __cpuinit local_timer_setup(unsigned int cpu) +void __cpuinit local_timer_setup(void) { + unsigned int cpu = smp_processor_id(); struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); clk->name = "dummy_timer"; diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 8dcb085..faeb01c 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -238,7 +238,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) if ((machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp())) || machine_is_realview_pb11mp()) - local_timer_setup(cpu); + local_timer_setup(); #endif /* diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 3adb535..66dc256 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -344,8 +344,7 @@ static void __init realview_eb_timer_init(void) if (core_tile_eb11mp() || core_tile_a9mp()) { #ifdef CONFIG_LOCAL_TIMERS - twd_base_addr = __io_address(REALVIEW_EB11MP_TWD_BASE); - twd_size = REALVIEW_EB11MP_TWD_SIZE; + twd_base = __io_address(REALVIEW_EB11MP_TWD_BASE); #endif timer_irq = IRQ_EB11MP_TIMER0_1; } else diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 8a27cd0..ba0fb33 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -292,8 +292,7 @@ static void __init realview_pb11mp_timer_init(void) timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20; #ifdef CONFIG_LOCAL_TIMERS - twd_base_addr = __io_address(REALVIEW_TC11MP_TWD_BASE); - twd_size = REALVIEW_TC11MP_TWD_SIZE; + twd_base = __io_address(REALVIEW_TC11MP_TWD_BASE); #endif realview_timer_init(IRQ_TC11MP_TIMER0_1); } -- cgit v0.10.2 From 1bbdf637baa708a2f0f46ead56c6c618b7dad7a8 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 1 Dec 2008 14:54:58 +0000 Subject: RealView: Clean up the machine_is_*() calls in platsmp.c Some of the calls weren't necessary and some others were duplicated. This patch tidies up the platsmp.c file. Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index b627992..65c39a7 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -50,7 +50,7 @@ #define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET) -/* used by entry-macro.S */ +/* used by entry-macro.S and platsmp.c */ void __iomem *gic_cpu_base_addr; /* diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h index cdbf551..268d770 100644 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ b/arch/arm/mach-realview/include/mach/board-eb.h @@ -193,4 +193,7 @@ #define core_tile_a9mp() 0 #endif +#define machine_is_realview_eb_mp() \ + (machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp())) + #endif /* __ASM_ARCH_BOARD_EB_H */ diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index faeb01c..8fce85f 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -23,6 +23,8 @@ #include #include +#include "core.h" + extern void realview_secondary_startup(void); /* @@ -31,16 +33,20 @@ extern void realview_secondary_startup(void); */ volatile int __cpuinitdata pen_release = -1; +static void __iomem *scu_base_addr(void) +{ + if (machine_is_realview_eb_mp()) + return __io_address(REALVIEW_EB11MP_SCU_BASE); + else if (machine_is_realview_pb11mp()) + return __io_address(REALVIEW_TC11MP_SCU_BASE); + else + return (void __iomem *)0; +} + static unsigned int __init get_core_count(void) { unsigned int ncores; - void __iomem *scu_base = 0; - - if (machine_is_realview_eb() && - (core_tile_eb11mp() || core_tile_a9mp())) - scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE); - else if (machine_is_realview_pb11mp()) - scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE); + void __iomem *scu_base = scu_base_addr(); if (scu_base) { ncores = __raw_readl(scu_base + SCU_CONFIG); @@ -57,15 +63,7 @@ static unsigned int __init get_core_count(void) static void scu_enable(void) { u32 scu_ctrl; - void __iomem *scu_base; - - if (machine_is_realview_eb() && - (core_tile_eb11mp() || core_tile_a9mp())) - scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE); - else if (machine_is_realview_pb11mp()) - scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE); - else - BUG(); + void __iomem *scu_base = scu_base_addr(); scu_ctrl = __raw_readl(scu_base + SCU_CTRL); scu_ctrl |= 1; @@ -90,11 +88,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - if (machine_is_realview_eb() && - (core_tile_eb11mp() || core_tile_a9mp())) - gic_cpu_init(0, __io_address(REALVIEW_EB11MP_GIC_CPU_BASE)); - else if (machine_is_realview_pb11mp()) - gic_cpu_init(0, __io_address(REALVIEW_TC11MP_GIC_CPU_BASE)); + gic_cpu_init(0, gic_cpu_base_addr); /* * let the primary processor know we're out of the @@ -235,10 +229,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in * realview_timer_init */ - if ((machine_is_realview_eb() && - (core_tile_eb11mp() || core_tile_a9mp())) || - machine_is_realview_pb11mp()) - local_timer_setup(); + local_timer_setup(); #endif /* -- cgit v0.10.2 From 0a3813306f432e8925ff648c84bd488b840e5185 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 1 Dec 2008 14:54:58 +0000 Subject: RealView: Refactor the Ethernet device registration This patch moves the Ethernet device registration from individual realview_*.c files to core.c. Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 65c39a7..d80208a 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -125,6 +125,21 @@ int realview_flash_register(struct resource *res, u32 num) return platform_device_register(&realview_flash_device); } +static struct platform_device realview_eth_device = { + .name = "smc911x", + .id = 0, + .num_resources = 2, +}; + +int realview_eth_register(const char *name, struct resource *res) +{ + if (name) + realview_eth_device.name = name; + realview_eth_device.resource = res; + + return platform_device_register(&realview_eth_device); +} + static struct resource realview_i2c_resource = { .start = REALVIEW_I2C_BASE, .end = REALVIEW_I2C_BASE + SZ_4K - 1, diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 3d97a4c..689c368 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -62,5 +62,6 @@ extern void __iomem *timer3_va_base; extern void realview_leds_event(led_event_t ledevt); extern void realview_timer_init(unsigned int timer_irq); extern int realview_flash_register(struct resource *res, u32 num); +extern int realview_eth_register(const char *name, struct resource *res); #endif diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 66dc256..e9b7b04 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -242,12 +242,6 @@ static struct resource realview_eb_eth_resources[] = { }, }; -static struct platform_device realview_eb_eth_device = { - .id = 0, - .num_resources = ARRAY_SIZE(realview_eb_eth_resources), - .resource = realview_eb_eth_resources, -}; - /* * Detect and register the correct Ethernet device. RealView/EB rev D * platforms use the newer SMSC LAN9118 Ethernet chip @@ -255,21 +249,19 @@ static struct platform_device realview_eb_eth_device = { static int eth_device_register(void) { void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K); + const char *name = NULL; u32 idrev; if (!eth_addr) return -ENOMEM; idrev = readl(eth_addr + 0x50); - if ((idrev & 0xFFFF0000) == 0x01180000) - /* SMSC LAN9118 chip present */ - realview_eb_eth_device.name = "smc911x"; - else - /* SMSC 91C111 chip present */ - realview_eb_eth_device.name = "smc91x"; + if ((idrev & 0xFFFF0000) != 0x01180000) + /* SMSC LAN9118 not present, use LAN91C111 instead */ + name = "smc91x"; iounmap(eth_addr); - return platform_device_register(&realview_eb_eth_device); + return realview_eth_register(name, realview_eb_eth_resources); } static void __init gic_init_irq(void) diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index a9fac65..0388ed0 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -222,13 +222,6 @@ static struct resource realview_pb1176_smsc911x_resources[] = { }, }; -static struct platform_device realview_pb1176_smsc911x_device = { - .name = "smc911x", - .id = 0, - .num_resources = ARRAY_SIZE(realview_pb1176_smsc911x_resources), - .resource = realview_pb1176_smsc911x_resources, -}; - static void __init gic_init_irq(void) { /* ARM1176 DevChip GIC, primary */ @@ -268,7 +261,7 @@ static void __init realview_pb1176_init(void) clk_register(&realview_clcd_clk); realview_flash_register(&realview_pb1176_flash_resource, 1); - platform_device_register(&realview_pb1176_smsc911x_device); + realview_eth_register(NULL, realview_pb1176_smsc911x_resources); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index ba0fb33..3f3f052 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -230,13 +230,6 @@ static struct resource realview_pb11mp_smsc911x_resources[] = { }, }; -static struct platform_device realview_pb11mp_smsc911x_device = { - .name = "smc911x", - .id = 0, - .num_resources = ARRAY_SIZE(realview_pb11mp_smsc911x_resources), - .resource = realview_pb11mp_smsc911x_resources, -}; - struct resource realview_pb11mp_cf_resources[] = { [0] = { .start = REALVIEW_PB11MP_CF_BASE, @@ -315,7 +308,7 @@ static void __init realview_pb11mp_init(void) realview_flash_register(realview_pb11mp_flash_resource, ARRAY_SIZE(realview_pb11mp_flash_resource)); - platform_device_register(&realview_pb11mp_smsc911x_device); + realview_eth_register(NULL, realview_pb11mp_smsc911x_resources); platform_device_register(&realview_i2c_device); platform_device_register(&realview_pb11mp_cf_device); diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 0c237e9..34c9443 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -221,13 +221,6 @@ static struct resource realview_pba8_smsc911x_resources[] = { }, }; -static struct platform_device realview_pba8_smsc911x_device = { - .name = "smc911x", - .id = 0, - .num_resources = ARRAY_SIZE(realview_pba8_smsc911x_resources), - .resource = realview_pba8_smsc911x_resources, -}; - struct resource realview_pba8_cf_resources[] = { [0] = { .start = REALVIEW_PBA8_CF_BASE, @@ -281,7 +274,7 @@ static void __init realview_pba8_init(void) realview_flash_register(realview_pba8_flash_resource, ARRAY_SIZE(realview_pba8_flash_resource)); - platform_device_register(&realview_pba8_smsc911x_device); + realview_eth_register(NULL, realview_pba8_smsc911x_resources); platform_device_register(&realview_i2c_device); platform_device_register(&realview_pba8_cf_device); -- cgit v0.10.2 From 0a5b2f6be708bb6a2388b9f188cf0c48a33b1d5f Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 1 Dec 2008 14:54:59 +0000 Subject: RealView: Allow the in-kernel smc911x.c driver on RealView This patch adds smc911x.c device configuration to the RealView platforms. At some point it may be changed to the new smsc911x.c driver (once complete testing was done). Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index d80208a..86aa6d7 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -125,6 +126,12 @@ int realview_flash_register(struct resource *res, u32 num) return platform_device_register(&realview_flash_device); } +static struct smc911x_platdata realview_smc911x_platdata = { + .flags = SMC911X_USE_32BIT, + .irq_flags = IRQF_SHARED, + .irq_polarity = 1, +}; + static struct platform_device realview_eth_device = { .name = "smc911x", .id = 0, @@ -136,6 +143,8 @@ int realview_eth_register(const char *name, struct resource *res) if (name) realview_eth_device.name = name; realview_eth_device.resource = res; + if (strcmp(realview_eth_device.name, "smc911x") == 0) + realview_eth_device.dev.platform_data = &realview_smc911x_platdata; return platform_device_register(&realview_eth_device); } -- cgit v0.10.2 From 2f152ad93127b7b890fc7134dabc64e086b37fac Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 1 Dec 2008 14:54:59 +0000 Subject: RealView: Update the realview_defconfig file to a newer kernel The original file was based on 2.6.14-rc2. Apart from the new symbols, the explicitly enabled features are AACI, MMC, AEABI, MACH_REALVIEW_PB1176 and MACH_REALVIEW_PB11MP. Signed-off-by: Catalin Marinas diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 907e543..7e253f5 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -1,105 +1,204 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Sep 29 14:50:10 2005 +# Linux kernel version: 2.6.28-rc2 +# Mon Nov 10 14:39:48 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # -# CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y +CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +CONFIG_ARCH_REALVIEW=y +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -CONFIG_ARCH_REALVIEW=y -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_MSM is not set + +# +# Boot options +# + +# +# Power management +# # # RealView platform type # CONFIG_MACH_REALVIEW_EB=y +# CONFIG_REALVIEW_EB_A9MP is not set +CONFIG_REALVIEW_EB_ARM11MP=y +# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set +CONFIG_MACH_REALVIEW_PB11MP=y +CONFIG_MACH_REALVIEW_PB1176=y +# CONFIG_MACH_REALVIEW_PBA8 is not set # # Processor Type # CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -# CONFIG_CPU_V6 is not set -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y +# CONFIG_CPU_ARM926T is not set +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +# CONFIG_CPU_V7 is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -107,8 +206,9 @@ CONFIG_CPU_TLB_V4WBI=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_L2X0=y CONFIG_ARM_GIC=y CONFIG_ICST307=y @@ -116,20 +216,41 @@ CONFIG_ICST307=y # Bus support # CONFIG_ARM_AMBA=y -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_SMP is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_ALIGNMENT_TRAP=y # @@ -139,6 +260,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -147,26 +274,24 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=tt # # At least one emulation must be selected # -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_VFP is not set +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y # # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # @@ -175,6 +300,11 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -186,34 +316,56 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -222,30 +374,37 @@ CONFIG_TCP_CONG_BIC=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -266,7 +425,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -279,7 +437,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_ARM_INTEGRATOR=y -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PLATRAM is not set # @@ -288,7 +445,7 @@ CONFIG_MTD_ARM_INTEGRATOR=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers @@ -296,121 +453,81 @@ CONFIG_MTD_ARM_INTEGRATOR=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -420,7 +537,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -433,11 +549,19 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -455,8 +579,11 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -475,73 +602,91 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# +# CONFIG_TCG_TPM is not set # CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Hardware Monitoring support +# Sonics Silicon Backplane # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Misc devices +# Multifunction device drivers # +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_WM8400 is not set # -# Multimedia Capabilities Port drivers +# Multimedia devices # # -# Multimedia devices +# Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# CONFIG_FB_ARMCLCD=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -549,27 +694,17 @@ CONFIG_FB_ARMCLCD=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -577,59 +712,71 @@ CONFIG_SND_PCM=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -# CONFIG_SND_ARMAACI is not set - -# -# Open Sound System -# +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_ARM=y +CONFIG_SND_ARMAACI=y +# CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# USB support +# MMC/SD/SDIO Card Drivers # -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# USB Gadget Support +# MMC/SD/SDIO Host Controller Drivers # -# CONFIG_USB_GADGET is not set +CONFIG_MMC_ARMMMCI=y +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # -# MMC/SD Card support +# Voltage and Current regulators # -# CONFIG_MMC is not set +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -654,51 +801,59 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set -# CONFIG_JFFS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set +# CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -739,26 +894,71 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_LL is not set # @@ -766,21 +966,106 @@ CONFIG_DEBUG_ERRORS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Cryptographic options +# Compression # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set # -# Hardware crypto devices +# Random Number Generation # +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v0.10.2 From 5582ad18381db2ab2159c2e8c7e51eaeb9c83900 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 1 Dec 2008 14:55:00 +0000 Subject: RealView: Update the realview-smp_defconfig file to a newer kernel The original file was based on 2.6.19-rc3. Apart from the new symbols, the explicitly enabled eatures are AEABI, REALVIEW_HIGH_PHYS_OFFSET and MACH_REALVIEW_PB11MP. Signed-off-by: Catalin Marinas diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index 0c09b23..cd29824 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -1,84 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc3 -# Wed Oct 25 14:12:00 2006 +# Linux kernel version: 2.6.28-rc2 +# Mon Nov 10 14:41:47 2008 # CONFIG_ARM=y -# CONFIG_GENERIC_TIME is not set +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -# CONFIG_CPUSETS is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -92,6 +119,8 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -103,19 +132,26 @@ CONFIG_ARCH_REALVIEW=y # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -123,13 +159,29 @@ CONFIG_ARCH_REALVIEW=y # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set + +# +# Boot options +# + +# +# Power management +# # # RealView platform type # CONFIG_MACH_REALVIEW_EB=y -CONFIG_REALVIEW_MPCORE=y +# CONFIG_REALVIEW_EB_A9MP is not set +CONFIG_REALVIEW_EB_ARM11MP=y +# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set +CONFIG_MACH_REALVIEW_PB11MP=y +# CONFIG_MACH_REALVIEW_PB1176 is not set +# CONFIG_MACH_REALVIEW_PBA8 is not set +CONFIG_REALVIEW_HIGH_PHYS_OFFSET=y # # Processor Type @@ -138,12 +190,15 @@ CONFIG_CPU_32=y # CONFIG_CPU_ARM926T is not set CONFIG_CPU_V6=y CONFIG_CPU_32v6K=y +# CONFIG_CPU_V7 is not set CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_V6=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y @@ -153,9 +208,10 @@ CONFIG_CPU_CP15_MMU=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_L2X0=y CONFIG_ARM_GIC=y CONFIG_ICST307=y @@ -163,32 +219,44 @@ CONFIG_ICST307=y # Bus support # CONFIG_ARM_AMBA=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_NR_CPUS=4 CONFIG_HOTPLUG_CPU=y CONFIG_LOCAL_TIMERS=y # CONFIG_PREEMPT is not set CONFIG_HZ=100 -# CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_ALIGNMENT_TRAP=y # @@ -198,6 +266,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -206,8 +280,7 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=tt # # At least one emulation must be selected # -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_NWFPE is not set # CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y @@ -215,28 +288,29 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set # # Power management options # # CONFIG_PM is not set -# CONFIG_APM is not set - -# -# Networking -# +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -255,36 +329,25 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -294,10 +357,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -305,9 +364,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -316,38 +380,37 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -373,7 +436,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -397,115 +459,73 @@ CONFIG_MTD_ARM_INTEGRATOR=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -513,6 +533,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -522,7 +543,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -538,9 +558,16 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -558,9 +585,11 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -579,97 +608,91 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# LED devices +# Sonics Silicon Backplane # -# CONFIG_NEW_LEDS is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED drivers +# Multifunction device drivers # +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_WM8400 is not set # -# LED Triggers +# Multimedia devices # # -# Multimedia devices +# Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# CONFIG_FB_ARMCLCD=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -677,28 +700,17 @@ CONFIG_FB_ARMCLCD=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -712,100 +724,65 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -CONFIG_SND_ARMAACI=m - -# -# Open Sound System -# +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_ARM=y +CONFIG_SND_ARMAACI=y +# CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +CONFIG_AC97_BUS=y +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set -CONFIG_MMC_BLOCK=y -CONFIG_MMC_ARMMMCI=y -# CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# Real Time Clock +# MMC/SD/SDIO Card Drivers # -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# RTC interfaces +# MMC/SD/SDIO Host Controller Drivers # -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_MMC_ARMMMCI=y +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # -# RTC drivers +# Voltage and Current regulators # -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_PL031=y -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set # # File systems # -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y -# CONFIG_INOTIFY_USER is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -831,11 +808,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -848,29 +825,28 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -878,17 +854,12 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -929,64 +900,177 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_RWSEMS=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set -CONFIG_FORCED_INLINING=y -# CONFIG_HEADERS_CHECK is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set # -# Cryptographic options +# Random Number Generation # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v0.10.2 From 6f13d278836d7251168631faeb0cbf5e4cdd98e5 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 1 Dec 2008 14:55:00 +0000 Subject: RealView: Select CPU_V6 for MACH_REALVIEW_PB11MP This seems to be missing from the arm:devel branch, though the other RealView configurations were modified accordingly. Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index eebf7ec..b117c13 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -32,6 +32,7 @@ config REALVIEW_EB_ARM11MP_REVB config MACH_REALVIEW_PB11MP bool "Support RealView/PB11MPCore platform" + select CPU_V6 select ARM_GIC help Include support for the ARM(R) RealView MPCore Platform Baseboard. -- cgit v0.10.2