From 810ec78e9a5d7de845598e8816370bcb2ccabf32 Mon Sep 17 00:00:00 2001 From: Aleksey Babahin Date: Tue, 20 Mar 2012 00:46:31 +0400 Subject: USB: serial: metro-usb: Fix idProduct for Uni-Directional mode. The right idProduct for Metrologic Bar Code Scanner in Uni-Directional Serial Emulation mode is 0x0700. Also rename idProduct for Bi-Directional mode to be a bit more informative. Signed-off-by: Aleksey Babahin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 6e1622f..08d16e8 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -27,8 +27,8 @@ /* Product information. */ #define FOCUS_VENDOR_ID 0x0C2E -#define FOCUS_PRODUCT_ID 0x0720 -#define FOCUS_PRODUCT_ID_UNI 0x0710 +#define FOCUS_PRODUCT_ID_BI 0x0720 +#define FOCUS_PRODUCT_ID_UNI 0x0700 #define METROUSB_SET_REQUEST_TYPE 0x40 #define METROUSB_SET_MODEM_CTRL_REQUEST 10 @@ -47,7 +47,7 @@ struct metrousb_private { /* Device table list. */ static struct usb_device_id id_table[] = { - { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID) }, + { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) }, { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) }, { }, /* Terminating entry. */ }; -- cgit v0.10.2 From 28a4b6a690dfc000e86c8e02a1e1c1a9832252ec Mon Sep 17 00:00:00 2001 From: Aleksey Babahin Date: Tue, 20 Mar 2012 00:46:32 +0400 Subject: USB: serial: metro-usb: dummy implement write_int_callback() function. This function is never called now. Because we don`t send much data to the device, only one byte via usb_interrupt_msg(). That doesn't require callback function. But without declaration of write_int_callback inside the struct usb_serial_driver, the usb_serial_probe doesn't initialize endpoint address for the interrupt out pipe(interrupt_out_endpointAddress). This endpoint is necessary for sending data via usb_interrupt_msg() function. Signed-off-by: Aleksey Babahin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 08d16e8..92b6f85 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -136,6 +136,14 @@ exit: __func__, result); } +static void metrousb_write_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + + dev_warn(&port->dev, "%s not implemented yet.\n", + __func__); +} + static void metrousb_cleanup(struct usb_serial_port *port) { dev_dbg(&port->dev, "%s\n", __func__); @@ -377,6 +385,7 @@ static struct usb_serial_driver metrousb_device = { .open = metrousb_open, .close = metrousb_cleanup, .read_int_callback = metrousb_read_int_callback, + .write_int_callback = metrousb_write_int_callback, .attach = metrousb_startup, .release = metrousb_shutdown, .throttle = metrousb_throttle, -- cgit v0.10.2 From 704577861d5e7408db59e182d8dca42e5bc4d506 Mon Sep 17 00:00:00 2001 From: Aleksey Babahin Date: Tue, 20 Mar 2012 00:46:33 +0400 Subject: USB: serial: metro-usb: get data from device in Uni-Directional mode. We should send special control command to tell device start or stop transmitting a data. In Bi-Directional mode that cmd`s are not required. Signed-off-by: Aleksey Babahin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 92b6f85..2df2217 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -56,6 +56,47 @@ MODULE_DEVICE_TABLE(usb, id_table); /* Input parameter constants. */ static bool debug; +/* UNI-Directional mode commands for device configure */ +#define UNI_CMD_OPEN 0x80 +#define UNI_CMD_CLOSE 0xFF + +inline int metrousb_is_unidirectional_mode(struct usb_serial_port *port) +{ + __u16 product_id = le16_to_cpu( + port->serial->dev->descriptor.idProduct); + + return product_id == FOCUS_PRODUCT_ID_UNI; +} + +static int metrousb_send_unidirectional_cmd(u8 cmd, struct usb_serial_port *port) +{ + int ret; + int actual_len; + u8 *buffer_cmd = NULL; + + if (!metrousb_is_unidirectional_mode(port)) + return 0; + + buffer_cmd = kzalloc(sizeof(cmd), GFP_KERNEL); + if (!buffer_cmd) + return -ENOMEM; + + *buffer_cmd = cmd; + + ret = usb_interrupt_msg(port->serial->dev, + usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress), + buffer_cmd, sizeof(cmd), + &actual_len, USB_CTRL_SET_TIMEOUT); + + kfree(buffer_cmd); + + if (ret < 0) + return ret; + else if (actual_len != sizeof(cmd)) + return -EIO; + return 0; +} + static void metrousb_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; @@ -154,6 +195,9 @@ static void metrousb_cleanup(struct usb_serial_port *port) usb_unlink_urb(port->interrupt_in_urb); usb_kill_urb(port->interrupt_in_urb); } + + /* Send deactivate cmd to device */ + metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port); } } @@ -205,6 +249,15 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port) goto exit; } + /* Send activate cmd to device */ + result = metrousb_send_unidirectional_cmd(UNI_CMD_OPEN, port); + if (result) { + dev_err(&port->dev, + "%s - failed to configure device for port number=%d, error code=%d\n", + __func__, port->number, result); + goto exit; + } + dev_dbg(&port->dev, "%s - port open\n", __func__); exit: return result; -- cgit v0.10.2 From 91fbecfe59356a37d7e979cdd97f01c062fe1fda Mon Sep 17 00:00:00 2001 From: Aleksey Babahin Date: Tue, 20 Mar 2012 00:46:34 +0400 Subject: USB: serial: metro-usb: print errors always, not only in debug mode. Signed-off-by: Aleksey Babahin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 2df2217..d9ae584 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -132,7 +132,7 @@ static void metrousb_read_int_callback(struct urb *urb) /* Set the data read from the usb port into the serial port buffer. */ tty = tty_port_tty_get(&port->port); if (!tty) { - dev_dbg(&port->dev, "%s - bad tty pointer - exiting\n", + dev_err(&port->dev, "%s - bad tty pointer - exiting\n", __func__); return; } @@ -162,7 +162,7 @@ static void metrousb_read_int_callback(struct urb *urb) result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result) - dev_dbg(&port->dev, + dev_err(&port->dev, "%s - failed submitting interrupt in urb, error code=%d\n", __func__, result); } @@ -172,7 +172,7 @@ exit: /* Try to resubmit the urb. */ result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - dev_dbg(&port->dev, + dev_err(&port->dev, "%s - failed submitting interrupt in urb, error code=%d\n", __func__, result); } @@ -212,7 +212,7 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port) /* Make sure the urb is initialized. */ if (!port->interrupt_in_urb) { - dev_dbg(&port->dev, "%s - interrupt urb not initialized\n", + dev_err(&port->dev, "%s - interrupt urb not initialized\n", __func__); return -ENODEV; } @@ -243,7 +243,7 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port) result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { - dev_dbg(&port->dev, + dev_err(&port->dev, "%s - failed submitting interrupt in urb, error code=%d\n", __func__, result); goto exit; @@ -282,7 +282,7 @@ static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int contr METROUSB_SET_REQUEST_TYPE, METROUSB_SET_MODEM_CTRL_REQUEST, control_state, 0, NULL, 0, WDR_TIMEOUT); if (retval < 0) - dev_dbg(&serial->dev->dev, + dev_err(&serial->dev->dev, "%s - set modem ctrl=0x%x failed, error code=%d\n", __func__, mcr, retval); @@ -415,7 +415,7 @@ static void metrousb_unthrottle(struct tty_struct *tty) port->interrupt_in_urb->dev = port->serial->dev; result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result) - dev_dbg(tty->dev, + dev_err(tty->dev, "failed submitting interrupt in urb error code=%d\n", result); } -- cgit v0.10.2 From bd2c09bc20c13eeb90cf185df9439e815302821d Mon Sep 17 00:00:00 2001 From: Aleksey Babahin Date: Tue, 20 Mar 2012 00:46:35 +0400 Subject: USB: serial: metro-usb: make debug messages bit more informative. In this place result value is always zero. Use urb->status instead. Signed-off-by: Aleksey Babahin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index d9ae584..9723853 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -119,12 +119,12 @@ static void metrousb_read_int_callback(struct urb *urb) /* urb has been terminated. */ dev_dbg(&port->dev, "%s - urb shutting down, error code=%d\n", - __func__, result); + __func__, urb->status); return; default: dev_dbg(&port->dev, "%s - non-zero urb received, error code=%d\n", - __func__, result); + __func__, urb->status); goto exit; } -- cgit v0.10.2 From 41dc29400212dd5e65a63c7de212b4df040255fb Mon Sep 17 00:00:00 2001 From: Aleksey Babahin Date: Tue, 20 Mar 2012 00:46:36 +0400 Subject: USB: serial: metro-usb: remove duplicated #include Signed-off-by: Aleksey Babahin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 9723853..1e2bb45 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include -- cgit v0.10.2 From e2dd3af49ad96804e385e7342ac5999a7da32df4 Mon Sep 17 00:00:00 2001 From: Aleksey Babahin Date: Tue, 20 Mar 2012 00:46:37 +0400 Subject: USB: serial: metro-usb: cosmetic fix in driver description. Message in kernel log: "metro-usb ttyUSB0: Metrologic USB to Serial converter now disconnected from ttyUSB0" bit more likely than: "metro-usb ttyUSB0: Metrologic USB to serial converter. converter now disconnected from ttyUSB0" Signed-off-by: Aleksey Babahin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 1e2bb45..d17c867 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -431,7 +431,7 @@ static struct usb_serial_driver metrousb_device = { .owner = THIS_MODULE, .name = "metro-usb", }, - .description = "Metrologic USB to serial converter.", + .description = "Metrologic USB to Serial", .id_table = id_table, .num_ports = 1, .open = metrousb_open, -- cgit v0.10.2 From a6765cbafa1570617fd68e4ff5fa525329c72e66 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 22 Mar 2012 16:50:54 +0100 Subject: USB: whiteheat: remove driver version Remove driver version -- it's the kernel version that matters. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 407e23c..522bf85 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -45,7 +45,6 @@ static bool debug; /* * Version Information */ -#define DRIVER_VERSION "v2.0" #define DRIVER_AUTHOR "Greg Kroah-Hartman , Stuart MacDonald " #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver" @@ -408,8 +407,8 @@ static int whiteheat_attach(struct usb_serial *serial) hw_info = (struct whiteheat_hw_info *)&result[1]; - dev_info(&serial->dev->dev, "%s: Driver %s: Firmware v%d.%02d\n", - serial->type->description, DRIVER_VERSION, + dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n", + serial->type->description, hw_info->sw_major_rev, hw_info->sw_minor_rev); for (i = 0; i < serial->num_ports; i++) { -- cgit v0.10.2 From 5c0c7582a618e843bdcf9c4b20d019d8ffd176ee Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 22 Mar 2012 16:50:55 +0100 Subject: USB: whiteheat: reimplement using generic framework Kill custom list-based read and write implementations and reimplement using the generic framework. Compile-only tested. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 522bf85..c141b47 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -95,10 +95,6 @@ static void whiteheat_release(struct usb_serial *serial); static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port); static void whiteheat_close(struct usb_serial_port *port); -static int whiteheat_write(struct tty_struct *tty, - struct usb_serial_port *port, - const unsigned char *buf, int count); -static int whiteheat_write_room(struct tty_struct *tty); static int whiteheat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void whiteheat_set_termios(struct tty_struct *tty, @@ -107,11 +103,6 @@ static int whiteheat_tiocmget(struct tty_struct *tty); static int whiteheat_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); -static int whiteheat_chars_in_buffer(struct tty_struct *tty); -static void whiteheat_throttle(struct tty_struct *tty); -static void whiteheat_unthrottle(struct tty_struct *tty); -static void whiteheat_read_callback(struct urb *urb); -static void whiteheat_write_callback(struct urb *urb); static struct usb_serial_driver whiteheat_fake_device = { .driver = { @@ -137,18 +128,13 @@ static struct usb_serial_driver whiteheat_device = { .release = whiteheat_release, .open = whiteheat_open, .close = whiteheat_close, - .write = whiteheat_write, - .write_room = whiteheat_write_room, .ioctl = whiteheat_ioctl, .set_termios = whiteheat_set_termios, .break_ctl = whiteheat_break_ctl, .tiocmget = whiteheat_tiocmget, .tiocmset = whiteheat_tiocmset, - .chars_in_buffer = whiteheat_chars_in_buffer, - .throttle = whiteheat_throttle, - .unthrottle = whiteheat_unthrottle, - .read_bulk_callback = whiteheat_read_callback, - .write_bulk_callback = whiteheat_write_callback, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -165,29 +151,8 @@ struct whiteheat_command_private { __u8 result_buffer[64]; }; - -#define THROTTLED 0x01 -#define ACTUALLY_THROTTLED 0x02 - -static int urb_pool_size = 8; - -struct whiteheat_urb_wrap { - struct list_head list; - struct urb *urb; -}; - struct whiteheat_private { - spinlock_t lock; - __u8 flags; __u8 mcr; /* FIXME: no locking on mcr */ - struct list_head rx_urbs_free; - struct list_head rx_urbs_submitted; - struct list_head rx_urb_q; - struct work_struct rx_work; - struct usb_serial_port *port; - struct list_head tx_urbs_free; - struct list_head tx_urbs_submitted; - struct mutex deathwarrant; }; @@ -197,12 +162,6 @@ static void stop_command_port(struct usb_serial *serial); static void command_port_write_callback(struct urb *urb); static void command_port_read_callback(struct urb *urb); -static int start_port_read(struct usb_serial_port *port); -static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, - struct list_head *head); -static struct list_head *list_first(struct list_head *head); -static void rx_data_softint(struct work_struct *work); - static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize); static int firm_open(struct usb_serial_port *port); @@ -348,11 +307,6 @@ static int whiteheat_attach(struct usb_serial *serial) __u8 *command; __u8 *result; int i; - int j; - struct urb *urb; - int buf_size; - struct whiteheat_urb_wrap *wrap; - struct list_head *tmp; command_port = serial->port[COMMAND_PORT]; @@ -422,72 +376,7 @@ static int whiteheat_attach(struct usb_serial *serial) goto no_private; } - spin_lock_init(&info->lock); - mutex_init(&info->deathwarrant); - info->flags = 0; info->mcr = 0; - INIT_WORK(&info->rx_work, rx_data_softint); - info->port = port; - - INIT_LIST_HEAD(&info->rx_urbs_free); - INIT_LIST_HEAD(&info->rx_urbs_submitted); - INIT_LIST_HEAD(&info->rx_urb_q); - INIT_LIST_HEAD(&info->tx_urbs_free); - INIT_LIST_HEAD(&info->tx_urbs_submitted); - - for (j = 0; j < urb_pool_size; j++) { - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - dev_err(&port->dev, "No free urbs available\n"); - goto no_rx_urb; - } - buf_size = port->read_urb->transfer_buffer_length; - urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); - if (!urb->transfer_buffer) { - dev_err(&port->dev, - "Couldn't allocate urb buffer\n"); - goto no_rx_buf; - } - wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); - if (!wrap) { - dev_err(&port->dev, - "Couldn't allocate urb wrapper\n"); - goto no_rx_wrap; - } - usb_fill_bulk_urb(urb, serial->dev, - usb_rcvbulkpipe(serial->dev, - port->bulk_in_endpointAddress), - urb->transfer_buffer, buf_size, - whiteheat_read_callback, port); - wrap->urb = urb; - list_add(&wrap->list, &info->rx_urbs_free); - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - dev_err(&port->dev, "No free urbs available\n"); - goto no_tx_urb; - } - buf_size = port->write_urb->transfer_buffer_length; - urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); - if (!urb->transfer_buffer) { - dev_err(&port->dev, - "Couldn't allocate urb buffer\n"); - goto no_tx_buf; - } - wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); - if (!wrap) { - dev_err(&port->dev, - "Couldn't allocate urb wrapper\n"); - goto no_tx_wrap; - } - usb_fill_bulk_urb(urb, serial->dev, - usb_sndbulkpipe(serial->dev, - port->bulk_out_endpointAddress), - urb->transfer_buffer, buf_size, - whiteheat_write_callback, port); - wrap->urb = urb; - list_add(&wrap->list, &info->tx_urbs_free); - } usb_set_serial_port_data(port, info); } @@ -530,29 +419,6 @@ no_command_private: for (i = serial->num_ports - 1; i >= 0; i--) { port = serial->port[i]; info = usb_get_serial_port_data(port); - for (j = urb_pool_size - 1; j >= 0; j--) { - tmp = list_first(&info->tx_urbs_free); - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - kfree(wrap); -no_tx_wrap: - kfree(urb->transfer_buffer); -no_tx_buf: - usb_free_urb(urb); -no_tx_urb: - tmp = list_first(&info->rx_urbs_free); - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - kfree(wrap); -no_rx_wrap: - kfree(urb->transfer_buffer); -no_rx_buf: - usb_free_urb(urb); -no_rx_urb: - ; - } kfree(info); no_private: ; @@ -568,12 +434,7 @@ no_command_buffer: static void whiteheat_release(struct usb_serial *serial) { struct usb_serial_port *command_port; - struct usb_serial_port *port; struct whiteheat_private *info; - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - struct list_head *tmp; - struct list_head *tmp2; int i; dbg("%s", __func__); @@ -583,31 +444,14 @@ static void whiteheat_release(struct usb_serial *serial) kfree(usb_get_serial_port_data(command_port)); for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - info = usb_get_serial_port_data(port); - list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) { - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - kfree(wrap); - kfree(urb->transfer_buffer); - usb_free_urb(urb); - } - list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) { - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - kfree(wrap); - kfree(urb->transfer_buffer); - usb_free_urb(urb); - } + info = usb_get_serial_port_data(serial->port[i]); kfree(info); } } static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) { - int retval = 0; + int retval; dbg("%s - port %d", __func__, port->number); @@ -615,9 +459,6 @@ static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) if (retval) goto exit; - if (tty) - tty->low_latency = 1; - /* send an open port command */ retval = firm_open(port); if (retval) { @@ -639,17 +480,12 @@ static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) usb_clear_halt(port->serial->dev, port->read_urb->pipe); usb_clear_halt(port->serial->dev, port->write_urb->pipe); - /* Start reading from the device */ - retval = start_port_read(port); + retval = usb_serial_generic_open(tty, port); if (retval) { - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __func__, retval); firm_close(port); stop_command_port(port->serial); goto exit; } - exit: dbg("%s - exit, retval = %d", __func__, retval); return retval; @@ -658,125 +494,14 @@ exit: static void whiteheat_close(struct usb_serial_port *port) { - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - struct list_head *tmp; - struct list_head *tmp2; - dbg("%s - port %d", __func__, port->number); firm_report_tx_done(port); firm_close(port); - /* shutdown our bulk reads and writes */ - mutex_lock(&info->deathwarrant); - spin_lock_irq(&info->lock); - list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - list_del(tmp); - spin_unlock_irq(&info->lock); - usb_kill_urb(urb); - spin_lock_irq(&info->lock); - list_add(tmp, &info->rx_urbs_free); - } - list_for_each_safe(tmp, tmp2, &info->rx_urb_q) - list_move(tmp, &info->rx_urbs_free); - list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - list_del(tmp); - spin_unlock_irq(&info->lock); - usb_kill_urb(urb); - spin_lock_irq(&info->lock); - list_add(tmp, &info->tx_urbs_free); - } - spin_unlock_irq(&info->lock); - mutex_unlock(&info->deathwarrant); - stop_command_port(port->serial); -} - - -static int whiteheat_write(struct tty_struct *tty, - struct usb_serial_port *port, const unsigned char *buf, int count) -{ - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - int result; - int bytes; - int sent = 0; - unsigned long flags; - struct list_head *tmp; - - dbg("%s - port %d", __func__, port->number); - - if (count == 0) { - dbg("%s - write request of 0 bytes", __func__); - return (0); - } - - while (count) { - spin_lock_irqsave(&info->lock, flags); - if (list_empty(&info->tx_urbs_free)) { - spin_unlock_irqrestore(&info->lock, flags); - break; - } - tmp = list_first(&info->tx_urbs_free); - list_del(tmp); - spin_unlock_irqrestore(&info->lock, flags); - - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - bytes = (count > port->bulk_out_size) ? - port->bulk_out_size : count; - memcpy(urb->transfer_buffer, buf + sent, bytes); - - usb_serial_debug_data(debug, &port->dev, - __func__, bytes, urb->transfer_buffer); - - urb->transfer_buffer_length = bytes; - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) { - dev_err_console(port, - "%s - failed submitting write urb, error %d\n", - __func__, result); - sent = result; - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->tx_urbs_free); - spin_unlock_irqrestore(&info->lock, flags); - break; - } else { - sent += bytes; - count -= bytes; - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->tx_urbs_submitted); - spin_unlock_irqrestore(&info->lock, flags); - } - } + usb_serial_generic_close(port); - return sent; -} - -static int whiteheat_write_room(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct list_head *tmp; - int room = 0; - unsigned long flags; - - dbg("%s - port %d", __func__, port->number); - - spin_lock_irqsave(&info->lock, flags); - list_for_each(tmp, &info->tx_urbs_free) - room++; - spin_unlock_irqrestore(&info->lock, flags); - room *= port->bulk_out_size; - - dbg("%s - returns %d", __func__, room); - return (room); + stop_command_port(port->serial); } static int whiteheat_tiocmget(struct tty_struct *tty) @@ -836,7 +561,7 @@ static int whiteheat_ioctl(struct tty_struct *tty, serstruct.line = port->serial->minor; serstruct.port = port->number; serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - serstruct.xmit_fifo_size = port->bulk_out_size; + serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo); serstruct.custom_divisor = 0; serstruct.baud_base = 460800; serstruct.close_delay = CLOSING_DELAY; @@ -866,60 +591,6 @@ static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) } -static int whiteheat_chars_in_buffer(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct list_head *tmp; - struct whiteheat_urb_wrap *wrap; - int chars = 0; - unsigned long flags; - - dbg("%s - port %d", __func__, port->number); - - spin_lock_irqsave(&info->lock, flags); - list_for_each(tmp, &info->tx_urbs_submitted) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - chars += wrap->urb->transfer_buffer_length; - } - spin_unlock_irqrestore(&info->lock, flags); - - dbg("%s - returns %d", __func__, chars); - return chars; -} - - -static void whiteheat_throttle(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct whiteheat_private *info = usb_get_serial_port_data(port); - - dbg("%s - port %d", __func__, port->number); - - spin_lock_irq(&info->lock); - info->flags |= THROTTLED; - spin_unlock_irq(&info->lock); -} - - -static void whiteheat_unthrottle(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct whiteheat_private *info = usb_get_serial_port_data(port); - int actually_throttled; - - dbg("%s - port %d", __func__, port->number); - - spin_lock_irq(&info->lock); - actually_throttled = info->flags & ACTUALLY_THROTTLED; - info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED); - spin_unlock_irq(&info->lock); - - if (actually_throttled) - rx_data_softint(&info->rx_work); -} - - /***************************************************************************** * Connect Tech's White Heat callback routines *****************************************************************************/ @@ -988,80 +659,6 @@ static void command_port_read_callback(struct urb *urb) } -static void whiteheat_read_callback(struct urb *urb) -{ - struct usb_serial_port *port = urb->context; - struct whiteheat_urb_wrap *wrap; - unsigned char *data = urb->transfer_buffer; - struct whiteheat_private *info = usb_get_serial_port_data(port); - int status = urb->status; - - dbg("%s - port %d", __func__, port->number); - - spin_lock(&info->lock); - wrap = urb_to_wrap(urb, &info->rx_urbs_submitted); - if (!wrap) { - spin_unlock(&info->lock); - dev_err(&port->dev, "%s - Not my urb!\n", __func__); - return; - } - list_del(&wrap->list); - spin_unlock(&info->lock); - - if (status) { - dbg("%s - nonzero read bulk status received: %d", - __func__, status); - spin_lock(&info->lock); - list_add(&wrap->list, &info->rx_urbs_free); - spin_unlock(&info->lock); - return; - } - - usb_serial_debug_data(debug, &port->dev, - __func__, urb->actual_length, data); - - spin_lock(&info->lock); - list_add_tail(&wrap->list, &info->rx_urb_q); - if (info->flags & THROTTLED) { - info->flags |= ACTUALLY_THROTTLED; - spin_unlock(&info->lock); - return; - } - spin_unlock(&info->lock); - - schedule_work(&info->rx_work); -} - - -static void whiteheat_write_callback(struct urb *urb) -{ - struct usb_serial_port *port = urb->context; - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct whiteheat_urb_wrap *wrap; - int status = urb->status; - - dbg("%s - port %d", __func__, port->number); - - spin_lock(&info->lock); - wrap = urb_to_wrap(urb, &info->tx_urbs_submitted); - if (!wrap) { - spin_unlock(&info->lock); - dev_err(&port->dev, "%s - Not my urb!\n", __func__); - return; - } - list_move(&wrap->list, &info->tx_urbs_free); - spin_unlock(&info->lock); - - if (status) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); - return; - } - - usb_serial_port_softint(port); -} - - /***************************************************************************** * Connect Tech's White Heat firmware interface *****************************************************************************/ @@ -1336,123 +933,6 @@ static void stop_command_port(struct usb_serial *serial) mutex_unlock(&command_info->mutex); } - -static int start_port_read(struct usb_serial_port *port) -{ - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - int retval = 0; - unsigned long flags; - struct list_head *tmp; - struct list_head *tmp2; - - spin_lock_irqsave(&info->lock, flags); - - list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) { - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - spin_unlock_irqrestore(&info->lock, flags); - retval = usb_submit_urb(urb, GFP_KERNEL); - if (retval) { - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_free); - list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - list_del(tmp); - spin_unlock_irqrestore(&info->lock, flags); - usb_kill_urb(urb); - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_free); - } - break; - } - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_submitted); - } - - spin_unlock_irqrestore(&info->lock, flags); - - return retval; -} - - -static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, - struct list_head *head) -{ - struct whiteheat_urb_wrap *wrap; - struct list_head *tmp; - - list_for_each(tmp, head) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - if (wrap->urb == urb) - return wrap; - } - - return NULL; -} - - -static struct list_head *list_first(struct list_head *head) -{ - return head->next; -} - - -static void rx_data_softint(struct work_struct *work) -{ - struct whiteheat_private *info = - container_of(work, struct whiteheat_private, rx_work); - struct usb_serial_port *port = info->port; - struct tty_struct *tty = tty_port_tty_get(&port->port); - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - unsigned long flags; - struct list_head *tmp; - struct list_head *tmp2; - int result; - int sent = 0; - - spin_lock_irqsave(&info->lock, flags); - if (info->flags & THROTTLED) { - spin_unlock_irqrestore(&info->lock, flags); - goto out; - } - - list_for_each_safe(tmp, tmp2, &info->rx_urb_q) { - list_del(tmp); - spin_unlock_irqrestore(&info->lock, flags); - - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - - if (tty && urb->actual_length) - sent += tty_insert_flip_string(tty, - urb->transfer_buffer, urb->actual_length); - - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) { - dev_err(&port->dev, - "%s - failed resubmitting read urb, error %d\n", - __func__, result); - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_free); - continue; - } - - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_submitted); - } - spin_unlock_irqrestore(&info->lock, flags); - - if (sent) - tty_flip_buffer_push(tty); -out: - tty_kref_put(tty); -} - module_usb_serial_driver(whiteheat_driver, serial_drivers); MODULE_AUTHOR(DRIVER_AUTHOR); @@ -1462,8 +942,5 @@ MODULE_LICENSE("GPL"); MODULE_FIRMWARE("whiteheat.fw"); MODULE_FIRMWARE("whiteheat_loader.fw"); -module_param(urb_pool_size, int, 0); -MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering"); - module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); -- cgit v0.10.2 From af5810597ab38ed1eb1d38e04b6e89c9ccec988e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 Mar 2012 20:31:38 +0200 Subject: USB: io_ti: fix abuse of interface data Fix abuse of interface data which was used to signal device disconnect. Use the usb_serial disconnect flag and mutex where appropriate. Note that there's no need to grab the mutex in chase_port as it does not access the device. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 40a95a7..5e4b471 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -547,6 +547,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout, { int baud_rate; struct tty_struct *tty = tty_port_tty_get(&port->port->port); + struct usb_serial *serial = port->port->serial; wait_queue_t wait; unsigned long flags; @@ -561,7 +562,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout, set_current_state(TASK_INTERRUPTIBLE); if (kfifo_len(&port->write_fifo) == 0 || timeout == 0 || signal_pending(current) - || !usb_get_intfdata(port->port->serial->interface)) + || serial->disconnected) /* disconnect */ break; spin_unlock_irqrestore(&port->ep_lock, flags); @@ -578,7 +579,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout, /* wait for data to drain from the device */ timeout += jiffies; while ((long)(jiffies - timeout) < 0 && !signal_pending(current) - && usb_get_intfdata(port->port->serial->interface)) { + && !serial->disconnected) { /* not disconnected */ if (!tx_active(port)) break; @@ -586,7 +587,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout, } /* disconnected */ - if (!usb_get_intfdata(port->port->serial->interface)) + if (serial->disconnected) return; /* wait one more character time, based on baud rate */ @@ -2003,8 +2004,8 @@ static void edge_close(struct usb_serial_port *port) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; + struct usb_serial *serial = port->serial; int port_number; - int status; dbg("%s - port %d", __func__, port->number); @@ -2028,12 +2029,18 @@ static void edge_close(struct usb_serial_port *port) * send a close port command to it */ dbg("%s - send umpc_close_port", __func__); port_number = port->number - port->serial->minor; - status = send_cmd(port->serial->dev, + + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) { + send_cmd(serial->dev, UMPC_CLOSE_PORT, (__u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0); + } + mutex_unlock(&serial->disc_mutex); + mutex_lock(&edge_serial->es_lock); --edge_port->edge_serial->num_ports_open; if (edge_port->edge_serial->num_ports_open <= 0) { -- cgit v0.10.2 From 1522d7034d739f2d348f4c544fe12ff9627c36a4 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 23 Mar 2012 12:10:48 +0200 Subject: usb: dwc3: core: define more revision macros We have other revisions already released, let's define revision macros for those so we can do runtime detection of known erratas. Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 6c7945b..a32c2b5 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -609,6 +609,10 @@ struct dwc3 { #define DWC3_REVISION_185A 0x5533185a #define DWC3_REVISION_188A 0x5533188a #define DWC3_REVISION_190A 0x5533190a +#define DWC3_REVISION_200A 0x5533200a +#define DWC3_REVISION_202A 0x5533202a +#define DWC3_REVISION_210A 0x5533210a +#define DWC3_REVISION_220A 0x5533220a unsigned is_selfpowered:1; unsigned three_stage_setup:1; -- cgit v0.10.2 From 07e7f47b6d8da3e290f90615c9a74dff0115709e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 23 Mar 2012 12:20:31 +0200 Subject: usb: dwc3: workaround: metastability state on Run/Stop bit All revisions prior to 2.20a have a known issue which causes metastability state on Run/Stop bit if we configure the core to work on any of the USB2-only speeds. The suggested workaround is just to never configure the core to anything other than SuperSpeed. Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 5255fe9..dda56b8 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1356,7 +1356,24 @@ static int dwc3_gadget_start(struct usb_gadget *g, reg = dwc3_readl(dwc->regs, DWC3_DCFG); reg &= ~(DWC3_DCFG_SPEED_MASK); - reg |= dwc->maximum_speed; + + /** + * WORKAROUND: DWC3 revision < 2.20a have an issue + * which would cause metastability state on Run/Stop + * bit if we try to force the IP to USB2-only mode. + * + * Because of that, we cannot configure the IP to any + * speed other than the SuperSpeed + * + * Refers to: + * + * STAR#9000525659: Clock Domain Crossing on DCTL in + * USB 2.0 Mode + */ + if (dwc->revision < DWC3_REVISION_220A) + reg |= DWC3_DCFG_SUPERSPEED; + else + reg |= dwc->maximum_speed; dwc3_writel(dwc->regs, DWC3_DCFG, reg); dwc->start_config_issued = false; -- cgit v0.10.2 From e167d9fbb881c030f93563fd364c8a0b8c5cd6d3 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 15 Mar 2012 23:49:56 +0100 Subject: bcma: scan for extra address space MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some cores like the USB core have two address spaces. In the USB host controller one address space is used for the OHCI and the other for the EHCI controller interface. The USB controller is the only core I found with two address spaces. This code is based on the AI scan function ai_scan() in shared/aiutils.c in the Broadcom SDK. CC: Rafał Miłecki CC: linux-wireless@vger.kernel.org Signed-off-by: Hauke Mehrtens Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c index f94cccc..3bea7fe 100644 --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c @@ -297,6 +297,23 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, return -EILSEQ; } + /* First Slave Address Descriptor should be port 0: + * the main register space for the core + */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0); + if (tmp <= 0) { + /* Try again to see if it is a bridge */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_BRIDGE, 0); + if (tmp <= 0) { + return -EILSEQ; + } else { + pr_info("Bridge found\n"); + return -ENXIO; + } + } + core->addr = tmp; + /* get & parse slave ports */ for (i = 0; i < ports[1]; i++) { for (j = 0; ; j++) { @@ -309,7 +326,7 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, break; } else { if (i == 0 && j == 0) - core->addr = tmp; + core->addr1 = tmp; } } } diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 5af9a07..98bb290 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -139,6 +139,7 @@ struct bcma_device { u8 core_unit; u32 addr; + u32 addr1; u32 wrap; void __iomem *io_addr; -- cgit v0.10.2 From 62e11d1bada33102e8827c8d0cca95c020cf5467 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 15 Mar 2012 23:49:57 +0100 Subject: USB: Add driver for the bcma bus This adds a USB driver using the generic platform device driver for the USB controller found on the Broadcom bcma bus. The bcma bus just exposes one device which serves the OHCI and the EHCI controller at the same time. This driver probes for this USB controller and creates and registers two new platform devices which will be probed by the new generic platform device driver. This makes it possible to use the EHCI and the OCHI controller on the bcma bus at the same time. Signed-off-by: Hauke Mehrtens Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index f788eb8..57d16b1 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -638,3 +638,15 @@ config USB_OCTEON_OHCI config USB_OCTEON2_COMMON bool default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI + +config USB_HCD_BCMA + tristate "BCMA usb host driver" + depends on BCMA && EXPERIMENTAL + select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD + select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD + help + Enbale support for the EHCI and OCHI host controller on an bcma bus. + It converts the bcma driver into two platform device drivers + for ehci and ohci. + + If unsure, say N. diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 0982bcc..11b3de0 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -41,3 +41,4 @@ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o +obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c new file mode 100644 index 0000000..afec047 --- /dev/null +++ b/drivers/usb/host/bcma-hcd.c @@ -0,0 +1,334 @@ +/* + * Broadcom specific Advanced Microcontroller Bus + * Broadcom USB-core driver (BCMA bus glue) + * + * Copyright 2011-2012 Hauke Mehrtens + * + * Based on ssb-ohci driver + * Copyright 2007 Michael Buesch + * + * Derived from the OHCI-PCI driver + * Copyright 1999 Roman Weissgaerber + * Copyright 2000-2002 David Brownell + * Copyright 1999 Linus Torvalds + * Copyright 1999 Gregory P. Smith + * + * Derived from the USBcore related parts of Broadcom-SB + * Copyright 2005-2011 Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Hauke Mehrtens"); +MODULE_DESCRIPTION("Common USB driver for BCMA Bus"); +MODULE_LICENSE("GPL"); + +struct bcma_hcd_device { + struct platform_device *ehci_dev; + struct platform_device *ohci_dev; +}; + +/* Wait for bitmask in a register to get set or cleared. + * timeout is in units of ten-microseconds. + */ +static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask, + int timeout) +{ + int i; + u32 val; + + for (i = 0; i < timeout; i++) { + val = bcma_read32(dev, reg); + if ((val & bitmask) == bitmask) + return 0; + udelay(10); + } + + return -ETIMEDOUT; +} + +static void __devinit bcma_hcd_4716wa(struct bcma_device *dev) +{ +#ifdef CONFIG_BCMA_DRIVER_MIPS + /* Work around for 4716 failures. */ + if (dev->bus->chipinfo.id == 0x4716) { + u32 tmp; + + tmp = bcma_cpu_clock(&dev->bus->drv_mips); + if (tmp >= 480000000) + tmp = 0x1846b; /* set CDR to 0x11(fast) */ + else if (tmp == 453000000) + tmp = 0x1046b; /* set CDR to 0x10(slow) */ + else + tmp = 0; + + /* Change Shim mdio control reg to fix host not acking at + * high frequencies + */ + if (tmp) { + bcma_write32(dev, 0x524, 0x1); /* write sel to enable */ + udelay(500); + + bcma_write32(dev, 0x524, tmp); + udelay(500); + bcma_write32(dev, 0x524, 0x4ab); + udelay(500); + bcma_read32(dev, 0x528); + bcma_write32(dev, 0x528, 0x80000000); + } + } +#endif /* CONFIG_BCMA_DRIVER_MIPS */ +} + +/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ +static void __devinit bcma_hcd_init_chip(struct bcma_device *dev) +{ + u32 tmp; + + /* + * USB 2.0 special considerations: + * + * 1. Since the core supports both OHCI and EHCI functions, it must + * only be reset once. + * + * 2. In addition to the standard SI reset sequence, the Host Control + * Register must be programmed to bring the USB core and various + * phy components out of reset. + */ + if (!bcma_core_is_enabled(dev)) { + bcma_core_enable(dev, 0); + mdelay(10); + if (dev->id.rev >= 5) { + /* Enable Misc PLL */ + tmp = bcma_read32(dev, 0x1e0); + tmp |= 0x100; + bcma_write32(dev, 0x1e0, tmp); + if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100)) + printk(KERN_EMERG "Failed to enable misc PPL!\n"); + + /* Take out of resets */ + bcma_write32(dev, 0x200, 0x4ff); + udelay(25); + bcma_write32(dev, 0x200, 0x6ff); + udelay(25); + + /* Make sure digital and AFE are locked in USB PHY */ + bcma_write32(dev, 0x524, 0x6b); + udelay(50); + tmp = bcma_read32(dev, 0x524); + udelay(50); + bcma_write32(dev, 0x524, 0xab); + udelay(50); + tmp = bcma_read32(dev, 0x524); + udelay(50); + bcma_write32(dev, 0x524, 0x2b); + udelay(50); + tmp = bcma_read32(dev, 0x524); + udelay(50); + bcma_write32(dev, 0x524, 0x10ab); + udelay(50); + tmp = bcma_read32(dev, 0x524); + + if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) { + tmp = bcma_read32(dev, 0x528); + printk(KERN_EMERG + "USB20H mdio_rddata 0x%08x\n", tmp); + } + bcma_write32(dev, 0x528, 0x80000000); + tmp = bcma_read32(dev, 0x314); + udelay(265); + bcma_write32(dev, 0x200, 0x7ff); + udelay(10); + + /* Take USB and HSIC out of non-driving modes */ + bcma_write32(dev, 0x510, 0); + } else { + bcma_write32(dev, 0x200, 0x7ff); + + udelay(1); + } + + bcma_hcd_4716wa(dev); + } +} + +static const struct usb_ehci_pdata ehci_pdata = { +}; + +static const struct usb_ohci_pdata ohci_pdata = { +}; + +static struct platform_device * __devinit +bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr) +{ + struct platform_device *hci_dev; + struct resource hci_res[2]; + int ret = -ENOMEM; + + memset(hci_res, 0, sizeof(hci_res)); + + hci_res[0].start = addr; + hci_res[0].end = hci_res[0].start + 0x1000 - 1; + hci_res[0].flags = IORESOURCE_MEM; + + hci_res[1].start = dev->irq; + hci_res[1].flags = IORESOURCE_IRQ; + + hci_dev = platform_device_alloc(ohci ? "ohci-platform" : + "ehci-platform" , 0); + if (!hci_dev) + return NULL; + + hci_dev->dev.parent = &dev->dev; + hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask; + + ret = platform_device_add_resources(hci_dev, hci_res, + ARRAY_SIZE(hci_res)); + if (ret) + goto err_alloc; + if (ohci) + ret = platform_device_add_data(hci_dev, &ohci_pdata, + sizeof(ohci_pdata)); + else + ret = platform_device_add_data(hci_dev, &ehci_pdata, + sizeof(ehci_pdata)); + if (ret) + goto err_alloc; + ret = platform_device_add(hci_dev); + if (ret) + goto err_alloc; + + return hci_dev; + +err_alloc: + platform_device_put(hci_dev); + return ERR_PTR(ret); +} + +static int __devinit bcma_hcd_probe(struct bcma_device *dev) +{ + int err; + u16 chipid_top; + u32 ohci_addr; + struct bcma_hcd_device *usb_dev; + struct bcma_chipinfo *chipinfo; + + chipinfo = &dev->bus->chipinfo; + /* USBcores are only connected on embedded devices. */ + chipid_top = (chipinfo->id & 0xFF00); + if (chipid_top != 0x4700 && chipid_top != 0x5300) + return -ENODEV; + + /* TODO: Probably need checks here; is the core connected? */ + + if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || + dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) + return -EOPNOTSUPP; + + usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL); + if (!usb_dev) + return -ENOMEM; + + bcma_hcd_init_chip(dev); + + /* In AI chips EHCI is addrspace 0, OHCI is 1 */ + ohci_addr = dev->addr1; + if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749) + && chipinfo->rev == 0) + ohci_addr = 0x18009000; + + usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr); + if (IS_ERR(usb_dev->ohci_dev)) { + err = PTR_ERR(usb_dev->ohci_dev); + goto err_free_usb_dev; + } + + usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr); + if (IS_ERR(usb_dev->ehci_dev)) { + err = PTR_ERR(usb_dev->ehci_dev); + goto err_unregister_ohci_dev; + } + + bcma_set_drvdata(dev, usb_dev); + return 0; + +err_unregister_ohci_dev: + platform_device_unregister(usb_dev->ohci_dev); +err_free_usb_dev: + kfree(usb_dev); + return err; +} + +static void __devexit bcma_hcd_remove(struct bcma_device *dev) +{ + struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev); + struct platform_device *ohci_dev = usb_dev->ohci_dev; + struct platform_device *ehci_dev = usb_dev->ehci_dev; + + if (ohci_dev) + platform_device_unregister(ohci_dev); + if (ehci_dev) + platform_device_unregister(ehci_dev); + + bcma_core_disable(dev, 0); +} + +static void bcma_hcd_shutdown(struct bcma_device *dev) +{ + bcma_core_disable(dev, 0); +} + +#ifdef CONFIG_PM + +static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state) +{ + bcma_core_disable(dev, 0); + + return 0; +} + +static int bcma_hcd_resume(struct bcma_device *dev) +{ + bcma_core_enable(dev, 0); + + return 0; +} + +#else /* !CONFIG_PM */ +#define bcma_hcd_suspend NULL +#define bcma_hcd_resume NULL +#endif /* CONFIG_PM */ + +static const struct bcma_device_id bcma_hcd_table[] __devinitconst = { + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS), + BCMA_CORETABLE_END +}; +MODULE_DEVICE_TABLE(bcma, bcma_hcd_table); + +static struct bcma_driver bcma_hcd_driver = { + .name = KBUILD_MODNAME, + .id_table = bcma_hcd_table, + .probe = bcma_hcd_probe, + .remove = __devexit_p(bcma_hcd_remove), + .shutdown = bcma_hcd_shutdown, + .suspend = bcma_hcd_suspend, + .resume = bcma_hcd_resume, +}; + +static int __init bcma_hcd_init(void) +{ + return bcma_driver_register(&bcma_hcd_driver); +} +module_init(bcma_hcd_init); + +static void __exit bcma_hcd_exit(void) +{ + bcma_driver_unregister(&bcma_hcd_driver); +} +module_exit(bcma_hcd_exit); -- cgit v0.10.2 From 7043c2ccf7483f170df4abcd4c95919050ac0760 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 15 Mar 2012 23:49:58 +0100 Subject: USB: Add driver for the ssb bus This adds a USB driver using the generic platform device driver for the USB controller found on the Broadcom ssb bus. The ssb bus just exposes one device which serves the OHCI and the EHCI controller at the same time. This driver probes for this USB controller and creates and registers two new platform devices which will be probed by the new generic platform device driver. This makes it possible to use the EHCI and the OCHI controller on the ssb bus at the same time. The old ssb OHCI USB driver will be removed in the next step as this driver also provide an OHCI driver and an EHCI for the cores supporting it. Signed-off-by: Hauke Mehrtens Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 57d16b1..2fc5637 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -650,3 +650,15 @@ config USB_HCD_BCMA for ehci and ohci. If unsure, say N. + +config USB_HCD_SSB + tristate "SSB usb host driver" + depends on SSB && EXPERIMENTAL + select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD + select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD + help + Enbale support for the EHCI and OCHI host controller on an bcma bus. + It converts the bcma driver into two platform device drivers + for ehci and ohci. + + If unsure, say N. diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 11b3de0..9e0a89c 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -42,3 +42,4 @@ obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o +obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o diff --git a/drivers/usb/host/ssb-hcd.c b/drivers/usb/host/ssb-hcd.c new file mode 100644 index 0000000..c2e7343 --- /dev/null +++ b/drivers/usb/host/ssb-hcd.c @@ -0,0 +1,279 @@ +/* + * Sonics Silicon Backplane + * Broadcom USB-core driver (SSB bus glue) + * + * Copyright 2011-2012 Hauke Mehrtens + * + * Based on ssb-ohci driver + * Copyright 2007 Michael Buesch + * + * Derived from the OHCI-PCI driver + * Copyright 1999 Roman Weissgaerber + * Copyright 2000-2002 David Brownell + * Copyright 1999 Linus Torvalds + * Copyright 1999 Gregory P. Smith + * + * Derived from the USBcore related parts of Broadcom-SB + * Copyright 2005-2011 Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Hauke Mehrtens"); +MODULE_DESCRIPTION("Common USB driver for SSB Bus"); +MODULE_LICENSE("GPL"); + +#define SSB_HCD_TMSLOW_HOSTMODE (1 << 29) + +struct ssb_hcd_device { + struct platform_device *ehci_dev; + struct platform_device *ohci_dev; + + u32 enable_flags; +}; + +static void __devinit ssb_hcd_5354wa(struct ssb_device *dev) +{ +#ifdef CONFIG_SSB_DRIVER_MIPS + /* Work around for 5354 failures */ + if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) { + /* Change syn01 reg */ + ssb_write32(dev, 0x894, 0x00fe00fe); + + /* Change syn03 reg */ + ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1); + } +#endif +} + +static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev) +{ + if (dev->id.coreid == SSB_DEV_USB20_HOST) { + /* + * USB 2.0 special considerations: + * + * In addition to the standard SSB reset sequence, the Host + * Control Register must be programmed to bring the USB core + * and various phy components out of reset. + */ + ssb_write32(dev, 0x200, 0x7ff); + + /* Change Flush control reg */ + ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8); + ssb_read32(dev, 0x400); + + /* Change Shim control reg */ + ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100); + ssb_read32(dev, 0x304); + + udelay(1); + + ssb_hcd_5354wa(dev); + } +} + +/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ +static u32 __devinit ssb_hcd_init_chip(struct ssb_device *dev) +{ + u32 flags = 0; + + if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) + /* Put the device into host-mode. */ + flags |= SSB_HCD_TMSLOW_HOSTMODE; + + ssb_device_enable(dev, flags); + + ssb_hcd_usb20wa(dev); + + return flags; +} + +static const struct usb_ehci_pdata ehci_pdata = { +}; + +static const struct usb_ohci_pdata ohci_pdata = { +}; + +static struct platform_device * __devinit +ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len) +{ + struct platform_device *hci_dev; + struct resource hci_res[2]; + int ret = -ENOMEM; + + memset(hci_res, 0, sizeof(hci_res)); + + hci_res[0].start = addr; + hci_res[0].end = hci_res[0].start + len - 1; + hci_res[0].flags = IORESOURCE_MEM; + + hci_res[1].start = dev->irq; + hci_res[1].flags = IORESOURCE_IRQ; + + hci_dev = platform_device_alloc(ohci ? "ohci-platform" : + "ehci-platform" , 0); + if (!hci_dev) + return NULL; + + hci_dev->dev.parent = dev->dev; + hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask; + + ret = platform_device_add_resources(hci_dev, hci_res, + ARRAY_SIZE(hci_res)); + if (ret) + goto err_alloc; + if (ohci) + ret = platform_device_add_data(hci_dev, &ohci_pdata, + sizeof(ohci_pdata)); + else + ret = platform_device_add_data(hci_dev, &ehci_pdata, + sizeof(ehci_pdata)); + if (ret) + goto err_alloc; + ret = platform_device_add(hci_dev); + if (ret) + goto err_alloc; + + return hci_dev; + +err_alloc: + platform_device_put(hci_dev); + return ERR_PTR(ret); +} + +static int __devinit ssb_hcd_probe(struct ssb_device *dev, + const struct ssb_device_id *id) +{ + int err, tmp; + int start, len; + u16 chipid_top; + u16 coreid = dev->id.coreid; + struct ssb_hcd_device *usb_dev; + + /* USBcores are only connected on embedded devices. */ + chipid_top = (dev->bus->chip_id & 0xFF00); + if (chipid_top != 0x4700 && chipid_top != 0x5300) + return -ENODEV; + + /* TODO: Probably need checks here; is the core connected? */ + + if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || + dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) + return -EOPNOTSUPP; + + usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL); + if (!usb_dev) + return -ENOMEM; + + /* We currently always attach SSB_DEV_USB11_HOSTDEV + * as HOST OHCI. If we want to attach it as Client device, + * we must branch here and call into the (yet to + * be written) Client mode driver. Same for remove(). */ + usb_dev->enable_flags = ssb_hcd_init_chip(dev); + + tmp = ssb_read32(dev, SSB_ADMATCH0); + + start = ssb_admatch_base(tmp); + len = (coreid == SSB_DEV_USB20_HOST) ? 0x800 : ssb_admatch_size(tmp); + usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, true, start, len); + if (IS_ERR(usb_dev->ohci_dev)) { + err = PTR_ERR(usb_dev->ohci_dev); + goto err_free_usb_dev; + } + + if (coreid == SSB_DEV_USB20_HOST) { + start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */ + usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, false, start, len); + if (IS_ERR(usb_dev->ehci_dev)) { + err = PTR_ERR(usb_dev->ehci_dev); + goto err_unregister_ohci_dev; + } + } + + ssb_set_drvdata(dev, usb_dev); + return 0; + +err_unregister_ohci_dev: + platform_device_unregister(usb_dev->ohci_dev); +err_free_usb_dev: + kfree(usb_dev); + return err; +} + +static void __devexit ssb_hcd_remove(struct ssb_device *dev) +{ + struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev); + struct platform_device *ohci_dev = usb_dev->ohci_dev; + struct platform_device *ehci_dev = usb_dev->ehci_dev; + + if (ohci_dev) + platform_device_unregister(ohci_dev); + if (ehci_dev) + platform_device_unregister(ehci_dev); + + ssb_device_disable(dev, 0); +} + +static void __devexit ssb_hcd_shutdown(struct ssb_device *dev) +{ + ssb_device_disable(dev, 0); +} + +#ifdef CONFIG_PM + +static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state) +{ + ssb_device_disable(dev, 0); + + return 0; +} + +static int ssb_hcd_resume(struct ssb_device *dev) +{ + struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev); + + ssb_device_enable(dev, usb_dev->enable_flags); + + return 0; +} + +#else /* !CONFIG_PM */ +#define ssb_hcd_suspend NULL +#define ssb_hcd_resume NULL +#endif /* CONFIG_PM */ + +static const struct ssb_device_id ssb_hcd_table[] __devinitconst = { + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), + SSB_DEVTABLE_END +}; +MODULE_DEVICE_TABLE(ssb, ssb_hcd_table); + +static struct ssb_driver ssb_hcd_driver = { + .name = KBUILD_MODNAME, + .id_table = ssb_hcd_table, + .probe = ssb_hcd_probe, + .remove = __devexit_p(ssb_hcd_remove), + .shutdown = ssb_hcd_shutdown, + .suspend = ssb_hcd_suspend, + .resume = ssb_hcd_resume, +}; + +static int __init ssb_hcd_init(void) +{ + return ssb_driver_register(&ssb_hcd_driver); +} +module_init(ssb_hcd_init); + +static void __exit ssb_hcd_exit(void) +{ + ssb_driver_unregister(&ssb_hcd_driver); +} +module_exit(ssb_hcd_exit); -- cgit v0.10.2 From 259b83a387dfb275988e72e25e3dd9e62d4916ac Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 15 Mar 2012 23:49:59 +0100 Subject: USB: OHCI: remove old SSB OHCI driver This is now replaced by the new ssb USB driver, which also supports devices with an EHCI controller. Signed-off-by: Hauke Mehrtens Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2fc5637..00b6fc8 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -373,10 +373,15 @@ config USB_OHCI_HCD_PCI If unsure, say Y. config USB_OHCI_HCD_SSB - bool "OHCI support for Broadcom SSB OHCI core" + bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)" depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL + select USB_HCD_SSB + select USB_OHCI_HCD_PLATFORM default n ---help--- + This option is deprecated now and the driver was removed, use + USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead. + Support for the Sonics Silicon Backplane (SSB) attached Broadcom USB OHCI core. diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 235171f..e0adf5c 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1080,11 +1080,6 @@ MODULE_LICENSE ("GPL"); #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver #endif -#ifdef CONFIG_USB_OHCI_HCD_SSB -#include "ohci-ssb.c" -#define SSB_OHCI_DRIVER ssb_ohci_driver -#endif - #ifdef CONFIG_MFD_SM501 #include "ohci-sm501.c" #define SM501_OHCI_DRIVER ohci_hcd_sm501_driver @@ -1128,8 +1123,7 @@ MODULE_LICENSE ("GPL"); !defined(SA1111_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(SM501_OHCI_DRIVER) && \ - !defined(TMIO_OHCI_DRIVER) && \ - !defined(SSB_OHCI_DRIVER) + !defined(TMIO_OHCI_DRIVER) #error "missing bus glue for ohci-hcd" #endif @@ -1195,12 +1189,6 @@ static int __init ohci_hcd_mod_init(void) goto error_pci; #endif -#ifdef SSB_OHCI_DRIVER - retval = ssb_driver_register(&SSB_OHCI_DRIVER); - if (retval) - goto error_ssb; -#endif - #ifdef SM501_OHCI_DRIVER retval = platform_driver_register(&SM501_OHCI_DRIVER); if (retval < 0) @@ -1224,10 +1212,6 @@ static int __init ohci_hcd_mod_init(void) platform_driver_unregister(&SM501_OHCI_DRIVER); error_sm501: #endif -#ifdef SSB_OHCI_DRIVER - ssb_driver_unregister(&SSB_OHCI_DRIVER); - error_ssb: -#endif #ifdef PCI_DRIVER pci_unregister_driver(&PCI_DRIVER); error_pci: @@ -1275,9 +1259,6 @@ static void __exit ohci_hcd_mod_exit(void) #ifdef SM501_OHCI_DRIVER platform_driver_unregister(&SM501_OHCI_DRIVER); #endif -#ifdef SSB_OHCI_DRIVER - ssb_driver_unregister(&SSB_OHCI_DRIVER); -#endif #ifdef PCI_DRIVER pci_unregister_driver(&PCI_DRIVER); #endif diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c deleted file mode 100644 index 5ba1859..0000000 --- a/drivers/usb/host/ohci-ssb.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * Sonics Silicon Backplane - * Broadcom USB-core OHCI driver - * - * Copyright 2007 Michael Buesch - * - * Derived from the OHCI-PCI driver - * Copyright 1999 Roman Weissgaerber - * Copyright 2000-2002 David Brownell - * Copyright 1999 Linus Torvalds - * Copyright 1999 Gregory P. Smith - * - * Derived from the USBcore related parts of Broadcom-SB - * Copyright 2005 Broadcom Corporation - * - * Licensed under the GNU/GPL. See COPYING for details. - */ -#include - - -#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29) - -struct ssb_ohci_device { - struct ohci_hcd ohci; /* _must_ be at the beginning. */ - - u32 enable_flags; -}; - -static inline -struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd) -{ - return (struct ssb_ohci_device *)(hcd->hcd_priv); -} - - -static int ssb_ohci_reset(struct usb_hcd *hcd) -{ - struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); - struct ohci_hcd *ohci = &ohcidev->ohci; - int err; - - ohci_hcd_init(ohci); - err = ohci_init(ohci); - - return err; -} - -static int ssb_ohci_start(struct usb_hcd *hcd) -{ - struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); - struct ohci_hcd *ohci = &ohcidev->ohci; - int err; - - err = ohci_run(ohci); - if (err < 0) { - ohci_err(ohci, "can't start\n"); - ohci_stop(hcd); - } - - return err; -} - -static const struct hc_driver ssb_ohci_hc_driver = { - .description = "ssb-usb-ohci", - .product_desc = "SSB OHCI Controller", - .hcd_priv_size = sizeof(struct ssb_ohci_device), - - .irq = ohci_irq, - .flags = HCD_MEMORY | HCD_USB11, - - .reset = ssb_ohci_reset, - .start = ssb_ohci_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - .get_frame_number = ohci_get_frame, - - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - - .start_port_reset = ohci_start_port_reset, -}; - -static void ssb_ohci_detach(struct ssb_device *dev) -{ - struct usb_hcd *hcd = ssb_get_drvdata(dev); - - if (hcd->driver->shutdown) - hcd->driver->shutdown(hcd); - usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); - ssb_device_disable(dev, 0); -} - -static int ssb_ohci_attach(struct ssb_device *dev) -{ - struct ssb_ohci_device *ohcidev; - struct usb_hcd *hcd; - int err = -ENOMEM; - u32 tmp, flags = 0; - - if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || - dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) - return -EOPNOTSUPP; - - if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) { - /* Put the device into host-mode. */ - flags |= SSB_OHCI_TMSLOW_HOSTMODE; - ssb_device_enable(dev, flags); - } else if (dev->id.coreid == SSB_DEV_USB20_HOST) { - /* - * USB 2.0 special considerations: - * - * In addition to the standard SSB reset sequence, the Host - * Control Register must be programmed to bring the USB core - * and various phy components out of reset. - */ - ssb_device_enable(dev, 0); - ssb_write32(dev, 0x200, 0x7ff); - - /* Change Flush control reg */ - tmp = ssb_read32(dev, 0x400); - tmp &= ~8; - ssb_write32(dev, 0x400, tmp); - tmp = ssb_read32(dev, 0x400); - - /* Change Shim control reg */ - tmp = ssb_read32(dev, 0x304); - tmp &= ~0x100; - ssb_write32(dev, 0x304, tmp); - tmp = ssb_read32(dev, 0x304); - - udelay(1); - - /* Work around for 5354 failures */ - if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) { - /* Change syn01 reg */ - tmp = 0x00fe00fe; - ssb_write32(dev, 0x894, tmp); - - /* Change syn03 reg */ - tmp = ssb_read32(dev, 0x89c); - tmp |= 0x1; - ssb_write32(dev, 0x89c, tmp); - } - } else - ssb_device_enable(dev, 0); - - hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, - dev_name(dev->dev)); - if (!hcd) - goto err_dev_disable; - ohcidev = hcd_to_ssb_ohci(hcd); - ohcidev->enable_flags = flags; - - tmp = ssb_read32(dev, SSB_ADMATCH0); - hcd->rsrc_start = ssb_admatch_base(tmp); - hcd->rsrc_len = ssb_admatch_size(tmp); - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) - goto err_put_hcd; - err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED); - if (err) - goto err_iounmap; - - ssb_set_drvdata(dev, hcd); - - return err; - -err_iounmap: - iounmap(hcd->regs); -err_put_hcd: - usb_put_hcd(hcd); -err_dev_disable: - ssb_device_disable(dev, flags); - return err; -} - -static int ssb_ohci_probe(struct ssb_device *dev, - const struct ssb_device_id *id) -{ - int err; - u16 chipid_top; - - /* USBcores are only connected on embedded devices. */ - chipid_top = (dev->bus->chip_id & 0xFF00); - if (chipid_top != 0x4700 && chipid_top != 0x5300) - return -ENODEV; - - /* TODO: Probably need checks here; is the core connected? */ - - if (usb_disabled()) - return -ENODEV; - - /* We currently always attach SSB_DEV_USB11_HOSTDEV - * as HOST OHCI. If we want to attach it as Client device, - * we must branch here and call into the (yet to - * be written) Client mode driver. Same for remove(). */ - - err = ssb_ohci_attach(dev); - - return err; -} - -static void ssb_ohci_remove(struct ssb_device *dev) -{ - ssb_ohci_detach(dev); -} - -#ifdef CONFIG_PM - -static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state) -{ - ssb_device_disable(dev, 0); - - return 0; -} - -static int ssb_ohci_resume(struct ssb_device *dev) -{ - struct usb_hcd *hcd = ssb_get_drvdata(dev); - struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); - - ssb_device_enable(dev, ohcidev->enable_flags); - - ohci_finish_controller_resume(hcd); - return 0; -} - -#else /* !CONFIG_PM */ -#define ssb_ohci_suspend NULL -#define ssb_ohci_resume NULL -#endif /* CONFIG_PM */ - -static const struct ssb_device_id ssb_ohci_table[] = { - SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), - SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), - SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), - SSB_DEVTABLE_END -}; -MODULE_DEVICE_TABLE(ssb, ssb_ohci_table); - -static struct ssb_driver ssb_ohci_driver = { - .name = KBUILD_MODNAME, - .id_table = ssb_ohci_table, - .probe = ssb_ohci_probe, - .remove = ssb_ohci_remove, - .suspend = ssb_ohci_suspend, - .resume = ssb_ohci_resume, -}; -- cgit v0.10.2 From fe375774bd88a358d24c3f624373117c642f6999 Mon Sep 17 00:00:00 2001 From: Venu Byravarasu Date: Thu, 5 Apr 2012 11:25:30 +0530 Subject: usb: host: tegra: code clean up With this patch: 1. Renamed structure and function names to be more meaningful. 2. Removed unnecessary local variables. Signed-off-by: Venu Byravarasu Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 3de48a2..3197f8a 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -462,26 +462,23 @@ static int tegra_ehci_bus_resume(struct usb_hcd *hcd) } #endif -struct temp_buffer { +struct dma_aligned_buffer { void *kmalloc_ptr; void *old_xfer_buffer; u8 data[0]; }; -static void free_temp_buffer(struct urb *urb) +static void free_dma_aligned_buffer(struct urb *urb) { - enum dma_data_direction dir; - struct temp_buffer *temp; + struct dma_aligned_buffer *temp; if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) return; - dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + temp = container_of(urb->transfer_buffer, + struct dma_aligned_buffer, data); - temp = container_of(urb->transfer_buffer, struct temp_buffer, - data); - - if (dir == DMA_FROM_DEVICE) + if (usb_urb_dir_in(urb)) memcpy(temp->old_xfer_buffer, temp->data, urb->transfer_buffer_length); urb->transfer_buffer = temp->old_xfer_buffer; @@ -490,10 +487,9 @@ static void free_temp_buffer(struct urb *urb) urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; } -static int alloc_temp_buffer(struct urb *urb, gfp_t mem_flags) +static int alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) { - enum dma_data_direction dir; - struct temp_buffer *temp, *kmalloc_ptr; + struct dma_aligned_buffer *temp, *kmalloc_ptr; size_t kmalloc_size; if (urb->num_sgs || urb->sg || @@ -501,22 +497,19 @@ static int alloc_temp_buffer(struct urb *urb, gfp_t mem_flags) !((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1))) return 0; - dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; - /* Allocate a buffer with enough padding for alignment */ kmalloc_size = urb->transfer_buffer_length + - sizeof(struct temp_buffer) + TEGRA_USB_DMA_ALIGN - 1; + sizeof(struct dma_aligned_buffer) + TEGRA_USB_DMA_ALIGN - 1; kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); if (!kmalloc_ptr) return -ENOMEM; - /* Position our struct temp_buffer such that data is aligned */ + /* Position our struct dma_aligned_buffer such that data is aligned */ temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1; - temp->kmalloc_ptr = kmalloc_ptr; temp->old_xfer_buffer = urb->transfer_buffer; - if (dir == DMA_TO_DEVICE) + if (usb_urb_dir_out(urb)) memcpy(temp->data, urb->transfer_buffer, urb->transfer_buffer_length); urb->transfer_buffer = temp->data; @@ -531,13 +524,13 @@ static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, { int ret; - ret = alloc_temp_buffer(urb, mem_flags); + ret = alloc_dma_aligned_buffer(urb, mem_flags); if (ret) return ret; ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); if (ret) - free_temp_buffer(urb); + free_dma_aligned_buffer(urb); return ret; } @@ -545,7 +538,7 @@ static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) { usb_hcd_unmap_urb_for_dma(hcd, urb); - free_temp_buffer(urb); + free_dma_aligned_buffer(urb); } static const struct hc_driver tegra_ehci_hc_driver = { -- cgit v0.10.2 From 0ca7eb235de5a72614c4ddd37707f9d9671e5403 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 29 Mar 2012 09:50:06 +0800 Subject: USB: EHCI: remove wrong debug message for port speed It displays wrong debug message if we plug in a full/low speed device at port for builtin TT controller. We can get device/port speed information at following code of hub_port_init, so it is better to replace it with debug message of "reset complete". Signed-off-by: Peter Chen Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 256fbd4..8f57c6e 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -536,7 +536,8 @@ static int check_reset_complete ( if (ehci->has_amcc_usb23) set_ohci_hcfs(ehci, 1); } else { - ehci_dbg (ehci, "port %d high speed\n", index + 1); + ehci_dbg(ehci, "port %d reset complete, port enabled\n", + index + 1); /* ensure 440EPx ohci controller state is suspended */ if (ehci->has_amcc_usb23) set_ohci_hcfs(ehci, 0); -- cgit v0.10.2 From 67c88382e0bf92d7e09536ac47674c9fc9398b98 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 Mar 2012 21:01:50 +0200 Subject: USB: add EOPNOTSUPP to usb_translate_errors Allow drivers to return EOPNOTSUPP to user space even when filtered through usb_translate_errors. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/usb.h b/include/linux/usb.h index 73b68d1..22e9b32 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1627,6 +1627,7 @@ static inline int usb_translate_errors(int error_code) case 0: case -ENOMEM: case -ENODEV: + case -EOPNOTSUPP: return error_code; default: return -EIO; -- cgit v0.10.2 From 58c559e6509f276d0afb4621b2122e994e70160c Mon Sep 17 00:00:00 2001 From: Ramneek Mehresh Date: Tue, 20 Mar 2012 10:35:50 +0530 Subject: fsl/usb: Add controller version based ULPI and UTMI phy support Add support for ULPI and UTMI PHYs based on usb controller version info read from device-tree Example of USB Controller versioning info: Version 1.2 and below : MPC8536, MPC8315, etc Version 1.6 : P1020, P1010, P2020, P5020, etc Version 2.2 : PSC9131, PSC9132, P3060, etc No changes for non-DT users Signed-off-by: Ramneek Mehresh Acked-by: Li Yang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 5f94e79..6087fa6 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004-2007,2011 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007,2011-2012 Freescale Semiconductor, Inc. * All rights reserved. * * Author: Li Yang @@ -58,9 +58,8 @@ static const char driver_name[] = "fsl-usb2-udc"; static const char driver_desc[] = DRIVER_DESC; static struct usb_dr_device *dr_regs; -#ifndef CONFIG_ARCH_MXC + static struct usb_sys_interface *usb_sys_regs; -#endif /* it is initialized in probe() */ static struct fsl_udc *udc_controller = NULL; @@ -244,10 +243,9 @@ static int dr_controller_setup(struct fsl_udc *udc) { unsigned int tmp, portctrl, ep_num; unsigned int max_no_of_ep; -#ifndef CONFIG_ARCH_MXC unsigned int ctrl; -#endif unsigned long timeout; + #define FSL_UDC_RESET_TIMEOUT 1000 /* Config PHY interface */ @@ -255,12 +253,32 @@ static int dr_controller_setup(struct fsl_udc *udc) portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH); switch (udc->phy_mode) { case FSL_USB2_PHY_ULPI: + if (udc->pdata->have_sysif_regs) { + if (udc->pdata->controller_ver) { + /* controller version 1.6 or above */ + ctrl = __raw_readl(&usb_sys_regs->control); + ctrl &= ~USB_CTRL_UTMI_PHY_EN; + ctrl |= USB_CTRL_USB_EN; + __raw_writel(ctrl, &usb_sys_regs->control); + } + } portctrl |= PORTSCX_PTS_ULPI; break; case FSL_USB2_PHY_UTMI_WIDE: portctrl |= PORTSCX_PTW_16BIT; /* fall through */ case FSL_USB2_PHY_UTMI: + if (udc->pdata->have_sysif_regs) { + if (udc->pdata->controller_ver) { + /* controller version 1.6 or above */ + ctrl = __raw_readl(&usb_sys_regs->control); + ctrl |= (USB_CTRL_UTMI_PHY_EN | + USB_CTRL_USB_EN); + __raw_writel(ctrl, &usb_sys_regs->control); + mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI + PHY CLK to become stable - 10ms*/ + } + } portctrl |= PORTSCX_PTS_UTMI; break; case FSL_USB2_PHY_SERIAL: diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index e651469..1212646 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -1,4 +1,12 @@ /* + * Copyright (C) 2004,2012 Freescale Semiconductor, Inc + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * * Freescale USB device/endpoint management registers */ #ifndef __FSL_USB2_UDC_H @@ -348,6 +356,9 @@ struct usb_sys_interface { /* control Register Bit Masks */ #define USB_CTRL_IOENB 0x00000004 #define USB_CTRL_ULPI_INT0EN 0x00000001 +#define USB_CTRL_UTMI_PHY_EN 0x00000200 +#define USB_CTRL_USB_EN 0x00000004 +#define USB_CTRL_ULPI_PHY_CLK_SEL 0x00000400 /* Endpoint Queue Head data struct * Rem: all the variables of qh are LittleEndian Mode diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 3e73451..653e577 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -1,6 +1,6 @@ /* * Copyright 2005-2009 MontaVista Software, Inc. - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008,2012 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -211,19 +211,32 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd, usb_put_hcd(hcd); } -static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, +static void ehci_fsl_setup_phy(struct usb_hcd *hcd, enum fsl_usb2_phy_modes phy_mode, unsigned int port_offset) { - u32 portsc; - struct usb_hcd *hcd = ehci_to_hcd(ehci); + u32 portsc, temp; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); void __iomem *non_ehci = hcd->regs; + struct device *dev = hcd->self.controller; + struct fsl_usb2_platform_data *pdata = dev->platform_data; + + if (pdata->controller_ver < 0) { + dev_warn(hcd->self.controller, "Could not get controller version\n"); + return; + } portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); switch (phy_mode) { case FSL_USB2_PHY_ULPI: + if (pdata->controller_ver) { + /* controller version 1.6 or above */ + temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); + out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | + USB_CTRL_USB_EN | ULPI_PHY_CLK_SEL); + } portsc |= PORT_PTS_ULPI; break; case FSL_USB2_PHY_SERIAL: @@ -233,6 +246,14 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, portsc |= PORT_PTS_PTW; /* fall through */ case FSL_USB2_PHY_UTMI: + if (pdata->controller_ver) { + /* controller version 1.6 or above */ + temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); + out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | + UTMI_PHY_EN | USB_CTRL_USB_EN); + mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to + become stable - 10ms*/ + } /* enable UTMI PHY */ setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN); portsc |= PORT_PTS_UTMI; @@ -271,7 +292,7 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) if ((pdata->operating_mode == FSL_USB2_DR_HOST) || (pdata->operating_mode == FSL_USB2_DR_OTG)) - ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0); + ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); if (pdata->operating_mode == FSL_USB2_MPH_HOST) { unsigned int chip, rev, svr; @@ -285,9 +306,9 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) ehci->has_fsl_port_bug = 1; if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) - ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0); + ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); if (pdata->port_enables & FSL_USB2_PORT1_ENABLED) - ehci_fsl_setup_phy(ehci, pdata->phy_mode, 1); + ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1); } if (pdata->have_sysif_regs) { diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 863fb0c..8840368 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2005-2010 Freescale Semiconductor, Inc. +/* Copyright (C) 2005-2010,2012 Freescale Semiconductor, Inc. * Copyright (c) 2005 MontaVista Software * * This program is free software; you can redistribute it and/or modify it @@ -50,4 +50,15 @@ #define CTRL_UTMI_PHY_EN (1<<9) #define CTRL_PHY_CLK_VALID (1 << 17) #define SNOOP_SIZE_2GB 0x1e + +/* control Register Bit Masks */ +#define ULPI_INT_EN (1<<0) +#define WU_INT_EN (1<<1) +#define USB_CTRL_USB_EN (1<<2) +#define LINE_STATE_FILTER__EN (1<<3) +#define KEEP_OTG_ON (1<<4) +#define OTG_PORT (1<<5) +#define PLL_RESET (1<<8) +#define UTMI_PHY_EN (1<<9) +#define ULPI_PHY_CLK_SEL (1<<10) #endif /* _EHCI_FSL_H */ diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index ab333ac..22ff6b3 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -119,6 +119,39 @@ error: static const struct of_device_id fsl_usb2_mph_dr_of_match[]; +static int usb_get_ver_info(struct device_node *np) +{ + int ver = -1; + + /* + * returns 1 for usb controller version 1.6 + * returns 2 for usb controller version 2.2 + * returns 0 otherwise + */ + if (of_device_is_compatible(np, "fsl-usb2-dr")) { + if (of_device_is_compatible(np, "fsl-usb2-dr-v1.6")) + ver = FSL_USB_VER_1_6; + else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.2")) + ver = FSL_USB_VER_2_2; + else /* for previous controller versions */ + ver = FSL_USB_VER_OLD; + + if (ver > -1) + return ver; + } + + if (of_device_is_compatible(np, "fsl-usb2-mph")) { + if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6")) + ver = FSL_USB_VER_1_6; + else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.2")) + ver = FSL_USB_VER_2_2; + else /* for previous controller versions */ + ver = FSL_USB_VER_OLD; + } + + return ver; +} + static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) { struct device_node *np = ofdev->dev.of_node; @@ -166,6 +199,14 @@ static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) prop = of_get_property(np, "phy_type", NULL); pdata->phy_mode = determine_usb_phy(prop); + pdata->controller_ver = usb_get_ver_info(np); + + if (pdata->have_sysif_regs) { + if (pdata->controller_ver < 0) { + dev_warn(&ofdev->dev, "Could not get controller version\n"); + return -ENODEV; + } + } for (i = 0; i < ARRAY_SIZE(dev_data->drivers); i++) { if (!dev_data->drivers[i]) diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index fffdf00..15be561 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -6,7 +6,7 @@ * * Maintainer: Kumar Gala * - * Copyright 2004 Freescale Semiconductor, Inc + * Copyright 2004,2012 Freescale Semiconductor, Inc * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -17,6 +17,12 @@ #ifndef _FSL_DEVICE_H_ #define _FSL_DEVICE_H_ +#define FSL_UTMI_PHY_DLY 10 /*As per P1010RM, delay for UTMI + PHY CLK to become stable - 10ms*/ +#define FSL_USB_VER_OLD 0 +#define FSL_USB_VER_1_6 1 +#define FSL_USB_VER_2_2 2 + #include /* @@ -63,6 +69,7 @@ struct platform_device; struct fsl_usb2_platform_data { /* board specific information */ + int controller_ver; enum fsl_usb2_operating_modes operating_mode; enum fsl_usb2_phy_modes phy_mode; unsigned int port_enables; -- cgit v0.10.2 From 310e9e334f60ca8282990a9c56678a4f58bce81f Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Thu, 5 Apr 2012 14:56:07 +0200 Subject: isp1760-if: make module unloads correctly Without this patch, the prepared disable routines will not be called on module unloading. Signed-off-by: Michael Grzeschik Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index 4592dc1..fff114f 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -398,6 +398,9 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev) hcd = isp1760_register(mem_res->start, mem_size, irq_res->start, irqflags, -ENOENT, &pdev->dev, dev_name(&pdev->dev), devflags); + + dev_set_drvdata(&pdev->dev, hcd); + if (IS_ERR(hcd)) { pr_warning("isp1760: Failed to register the HCD device\n"); ret = -ENODEV; @@ -417,11 +420,16 @@ static int __devexit isp1760_plat_remove(struct platform_device *pdev) { struct resource *mem_res; resource_size_t mem_size; + struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); + + usb_remove_hcd(hcd); mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); mem_size = resource_size(mem_res); release_mem_region(mem_res->start, mem_size); + usb_put_hcd(hcd); + return 0; } -- cgit v0.10.2 From 94011ec24ca1d1d5674651d6f30368f4138dbdd6 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Thu, 5 Apr 2012 14:56:08 +0200 Subject: isp1760-hcd: don't confuse parsers on kmem_cache_create If DEBUG is defined, the kmem_cache_create call a WARN_ON if the name of the cache uses a space. Signed-off-by: Michael Grzeschik Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index fc72d44..02198ee 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -2176,7 +2176,7 @@ static const struct hc_driver isp1760_hc_driver = { int __init init_kmem_once(void) { - urb_listitem_cachep = kmem_cache_create("isp1760 urb_listitem", + urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem", sizeof(struct urb_listitem), 0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL); -- cgit v0.10.2 From 8cb2268001f9553f9ff83416ce3f009c4ab1e089 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Wed, 18 Apr 2012 09:58:23 +0200 Subject: isp1760-hcd: move dequeued qtds to the front in qh Make sure that dequeued urbs get handled first by collect_qtds. To achieve that we better move them up to the head in the qh list. This for instance fixes hanging serial devices, which wait for dequeued urbs to properly close their device node. Signed-off-by: Michael Grzeschik Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 02198ee..4a378d3 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1683,6 +1683,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, list_for_each_entry(qtd, &qh->qtd_list, qtd_list) if (qtd->urb == urb) { dequeue_urb_from_qtd(hcd, qh, qtd); + list_move(&qtd->qtd_list, &qh->qtd_list); break; } -- cgit v0.10.2 From 8788fa0344419d1d9bd1be3f61f1f0c4d9c1d568 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Thu, 5 Apr 2012 14:56:10 +0200 Subject: isp1760-hcd: fix possible memory leak if urb could not be enqueued After packetize_urb was called, we could still run into an error path and will not hand over the prepared qtd to the qtd_list. Make sure to free the prepared qtd in that case to avoid memory leaks. Signed-off-by: Michael Grzeschik Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 4a378d3..a35bbdd 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1562,11 +1562,14 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { retval = -ESHUTDOWN; + qtd_list_free(&new_qtds); goto out; } retval = usb_hcd_link_urb_to_ep(hcd, urb); - if (retval) + if (retval) { + qtd_list_free(&new_qtds); goto out; + } qh = urb->ep->hcpriv; if (qh) { @@ -1584,6 +1587,7 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, if (!qh) { retval = -ENOMEM; usb_hcd_unlink_urb_from_ep(hcd, urb); + qtd_list_free(&new_qtds); goto out; } list_add_tail(&qh->qh_list, ep_queue); -- cgit v0.10.2 From c6fa0b4c4e09a13e034a1c6c542dc2b3539ba1b8 Mon Sep 17 00:00:00 2001 From: Venu Byravarasu Date: Fri, 6 Apr 2012 09:40:18 +0530 Subject: usb: host: tegra: re-arranging ehci functions Re-arranged EHCI generic and tegra specific functions into two separate groups for more readability. Signed-off-by: Venu Byravarasu Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 3197f8a..4c8bef6 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -545,31 +545,32 @@ static const struct hc_driver tegra_ehci_hc_driver = { .description = hcd_name, .product_desc = "Tegra EHCI Host Controller", .hcd_priv_size = sizeof(struct ehci_hcd), - .flags = HCD_USB2 | HCD_MEMORY, - .reset = tegra_ehci_setup, + /* standard ehci functions */ .irq = ehci_irq, - .start = ehci_run, .stop = ehci_stop, - .shutdown = tegra_ehci_shutdown, .urb_enqueue = ehci_urb_enqueue, .urb_dequeue = ehci_urb_dequeue, - .map_urb_for_dma = tegra_ehci_map_urb_for_dma, - .unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma, .endpoint_disable = ehci_endpoint_disable, .endpoint_reset = ehci_endpoint_reset, .get_frame_number = ehci_get_frame, .hub_status_data = ehci_hub_status_data, - .hub_control = tegra_ehci_hub_control, .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + /* modified ehci functions for tegra */ + .reset = tegra_ehci_setup, + .shutdown = tegra_ehci_shutdown, + .map_urb_for_dma = tegra_ehci_map_urb_for_dma, + .unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma, + .hub_control = tegra_ehci_hub_control, #ifdef CONFIG_PM .bus_suspend = tegra_ehci_bus_suspend, .bus_resume = tegra_ehci_bus_resume, #endif - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, }; static int setup_vbus_gpio(struct platform_device *pdev) -- cgit v0.10.2 From e44fabbe7fbf8c71cd2e7d28078202e557b4e057 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 9 Apr 2012 22:52:04 +0200 Subject: usb/storage/ene_ub6250: Remove redundant NULL check before release_firmware() and pointless assignment release_firmware() tests for a NULL pointer, so it's redundant to do that checking before calling it. Additionally, in ene_load_bincode(), 'sd_fw' is a local variable so setting it to NULL just before it goes out of scope is completely pointless, so remove that assignment. Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index e7e6781..b28f2ad 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -1933,11 +1933,7 @@ static int ene_load_bincode(struct us_data *us, unsigned char flag) kfree(buf); nofw: - if (sd_fw != NULL) { - release_firmware(sd_fw); - sd_fw = NULL; - } - + release_firmware(sd_fw); return result; } -- cgit v0.10.2 From 7af395922a9f2ba72f40a09641347b31cd1abad4 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 9 Apr 2012 22:52:26 +0200 Subject: usb/atm/ueagle-atm: Don't test for NULL ptr before calling release_firmware() release_firmware() deals gracefullt w/ NULL pointers, no need to check first. Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 01ea5d7..d7e422d 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -1357,10 +1357,8 @@ static int uea_stat_e1(struct uea_softc *sc) /* release the dsp firmware as it is not needed until * the next failure */ - if (sc->dsp_firm) { - release_firmware(sc->dsp_firm); - sc->dsp_firm = NULL; - } + release_firmware(sc->dsp_firm); + sc->dsp_firm = NULL; } /* always update it as atm layer could not be init when we switch to @@ -1496,10 +1494,8 @@ static int uea_stat_e4(struct uea_softc *sc) /* release the dsp firmware as it is not needed until * the next failure */ - if (sc->dsp_firm) { - release_firmware(sc->dsp_firm); - sc->dsp_firm = NULL; - } + release_firmware(sc->dsp_firm); + sc->dsp_firm = NULL; } /* always update it as atm layer could not be init when we switch to @@ -2240,8 +2236,7 @@ static void uea_stop(struct uea_softc *sc) /* flush the work item, when no one can schedule it */ flush_work_sync(&sc->task); - if (sc->dsp_firm) - release_firmware(sc->dsp_firm); + release_firmware(sc->dsp_firm); uea_leaves(INS_TO_USBDEV(sc)); } -- cgit v0.10.2 From 3e0c70d050c7ed6d163897a6ac894f063c31b10f Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Thu, 12 Apr 2012 15:48:49 +0900 Subject: usb: ehci-sh: Add PHY init function with platform data In devices using ehci-sh, initialization of the PHY may be necessary. This adds platform data to ehci-sh and provide function to initialize PHY. Signed-off-by: Nobuhiro Iwamatsu CC: Shimoda, Yoshihiro Acked-by: Paul Mundt Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index 9d9cf47..ca819cd 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -11,6 +11,7 @@ */ #include #include +#include struct ehci_sh_priv { struct clk *iclk, *fclk; @@ -100,6 +101,7 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) const struct hc_driver *driver = &ehci_sh_hc_driver; struct resource *res; struct ehci_sh_priv *priv; + struct ehci_sh_platdata *pdata; struct usb_hcd *hcd; int irq, ret; @@ -124,6 +126,9 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) goto fail_create_hcd; } + if (pdev->dev.platform_data != NULL) + pdata = pdev->dev.platform_data; + /* initialize hcd */ hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev, dev_name(&pdev->dev)); @@ -168,6 +173,9 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) clk_enable(priv->fclk); clk_enable(priv->iclk); + if (pdata && pdata->phy_init) + pdata->phy_init(); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret != 0) { dev_err(&pdev->dev, "Failed to add hcd"); diff --git a/include/linux/platform_data/ehci-sh.h b/include/linux/platform_data/ehci-sh.h new file mode 100644 index 0000000..5c15a73 --- /dev/null +++ b/include/linux/platform_data/ehci-sh.h @@ -0,0 +1,28 @@ +/* + * EHCI SuperH driver platform data + * + * Copyright (C) 2012 Nobuhiro Iwamatsu + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __USB_EHCI_SH_H +#define __USB_EHCI_SH_H + +struct ehci_sh_platdata { + void (*phy_init)(void); /* Phy init function */ +}; + +#endif /* __USB_EHCI_SH_H */ -- cgit v0.10.2 From 8b4fc8c7e0ba3022bb6187c809d8d2b955b2d7fd Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Fri, 13 Apr 2012 11:06:36 +0900 Subject: USB: ehci-s5p: add clock gating to suspend/resume This patch adds clock gating to suspend and resume functions. Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index f098e2a..c474cec 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -232,6 +232,8 @@ static int s5p_ehci_suspend(struct device *dev) if (pdata && pdata->phy_exit) pdata->phy_exit(pdev, S5P_USB_PHY_HOST); + clk_disable(s5p_ehci->clk); + return rc; } @@ -243,6 +245,8 @@ static int s5p_ehci_resume(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; + clk_enable(s5p_ehci->clk); + if (pdata && pdata->phy_init) pdata->phy_init(pdev, S5P_USB_PHY_HOST); -- cgit v0.10.2 From 56fafb94f64efaca625206a3876432b96558dcb0 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 16 Apr 2012 09:08:08 +0530 Subject: USB: Add DT probing support to ehci-spear and ohci-spear This patch adds support to configure the SPEAr EHCI & OHCI driver via device-tree instead of platform_data. Signed-off-by: Stefan Roese Acked-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/usb/spear-usb.txt b/Documentation/devicetree/bindings/usb/spear-usb.txt new file mode 100644 index 0000000..f8a464a --- /dev/null +++ b/Documentation/devicetree/bindings/usb/spear-usb.txt @@ -0,0 +1,39 @@ +ST SPEAr SoC USB controllers: +----------------------------- + +EHCI: +----- + +Required properties: +- compatible: "st,spear600-ehci" +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the EHCI interrupt + +Example: + + ehci@e1800000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe1800000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <27>; + }; + + +OHCI: +----- + +Required properties: +- compatible: "st,spear600-ohci" +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the OHCI interrupt + +Example: + + ohci@e1900000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe1800000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <26>; + }; diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 6e92855..2e3c89a 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -13,6 +13,7 @@ #include #include +#include #include #include @@ -168,6 +169,8 @@ static int ehci_spear_drv_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend, ehci_spear_drv_resume); +static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32); + static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd ; @@ -175,12 +178,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) struct resource *res; struct clk *usbh_clk; const struct hc_driver *driver = &ehci_spear_hc_driver; - int *pdata = pdev->dev.platform_data; int irq, retval; char clk_name[20] = "usbh_clk"; - - if (pdata == NULL) - return -EFAULT; + static int instance = -1; if (usb_disabled()) return -ENODEV; @@ -191,8 +191,22 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) goto fail_irq_get; } - if (*pdata >= 0) - sprintf(clk_name, "usbh.%01d_clk", *pdata); + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &spear_ehci_dma_mask; + + /* + * Increment the device instance, when probing via device-tree + */ + if (pdev->id < 0) + instance++; + else + instance = pdev->id; + sprintf(clk_name, "usbh.%01d_clk", instance); usbh_clk = clk_get(NULL, clk_name); if (IS_ERR(usbh_clk)) { @@ -277,6 +291,11 @@ static int spear_ehci_hcd_drv_remove(struct platform_device *pdev) return 0; } +static struct of_device_id spear_ehci_id_table[] __devinitdata = { + { .compatible = "st,spear600-ehci", }, + { }, +}; + static struct platform_driver spear_ehci_hcd_driver = { .probe = spear_ehci_hcd_drv_probe, .remove = spear_ehci_hcd_drv_remove, @@ -285,6 +304,7 @@ static struct platform_driver spear_ehci_hcd_driver = { .name = "spear-ehci", .bus = &platform_bus_type, .pm = &ehci_spear_pm_ops, + .of_match_table = of_match_ptr(spear_ehci_id_table), } }; diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index 95c1648..eb4640b 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -14,6 +14,7 @@ #include #include #include +#include struct spear_ohci { struct ohci_hcd ohci; @@ -90,6 +91,8 @@ static const struct hc_driver ohci_spear_hc_driver = { .start_port_reset = ohci_start_port_reset, }; +static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32); + static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) { const struct hc_driver *driver = &ohci_spear_hc_driver; @@ -98,11 +101,8 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) struct spear_ohci *ohci_p; struct resource *res; int retval, irq; - int *pdata = pdev->dev.platform_data; char clk_name[20] = "usbh_clk"; - - if (pdata == NULL) - return -EFAULT; + static int instance = -1; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -110,8 +110,22 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) goto fail_irq_get; } - if (*pdata >= 0) - sprintf(clk_name, "usbh.%01d_clk", *pdata); + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &spear_ohci_dma_mask; + + /* + * Increment the device instance, when probing via device-tree + */ + if (pdev->id < 0) + instance++; + else + instance = pdev->id; + sprintf(clk_name, "usbh.%01d_clk", instance); usbh_clk = clk_get(NULL, clk_name); if (IS_ERR(usbh_clk)) { @@ -222,6 +236,11 @@ static int spear_ohci_hcd_drv_resume(struct platform_device *dev) } #endif +static struct of_device_id spear_ohci_id_table[] __devinitdata = { + { .compatible = "st,spear600-ohci", }, + { }, +}; + /* Driver definition to register with the platform bus */ static struct platform_driver spear_ohci_hcd_driver = { .probe = spear_ohci_hcd_drv_probe, @@ -233,6 +252,7 @@ static struct platform_driver spear_ohci_hcd_driver = { .driver = { .owner = THIS_MODULE, .name = "spear-ohci", + .of_match_table = of_match_ptr(spear_ohci_id_table), }, }; -- cgit v0.10.2 From 6feff1b92bedab133c5835e510d11f62e843b257 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 17 Apr 2012 15:23:25 -0400 Subject: EHCI: don't try to clear the IAAD bit This patch (as1541) corrects a small mistake in ehci-hcd. The IAAD (Interrupt on Async Advance Doorbell) bit in the USBCMD register is designed, as its name says, to act as a "doorbell". That is, the driver activates the bit by setting it to 1, and the hardware deactivates it later by setting it back to 0. The driver cannot clear the bit by writing a 0 to it; such writes are simply ignored. Therefore there is no reason for ehci-hcd to try to clear the bit. The patch removes the two instances where such attempts occur. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 057cdda..343f40c 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -415,9 +415,6 @@ static void ehci_iaa_watchdog(unsigned long param) * CMD_IAAD when it sets STS_IAA.) */ cmd = ehci_readl(ehci, &ehci->regs->command); - if (cmd & CMD_IAAD) - ehci_writel(ehci, cmd & ~CMD_IAAD, - &ehci->regs->command); /* If IAA is set here it either legitimately triggered * before we cleared IAAD above (but _way_ late, so we'll @@ -887,11 +884,8 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* complete the unlinking of some qh [4.15.2.3] */ if (status & STS_IAA) { /* guard against (alleged) silicon errata */ - if (cmd & CMD_IAAD) { - ehci_writel(ehci, cmd & ~CMD_IAAD, - &ehci->regs->command); + if (cmd & CMD_IAAD) ehci_dbg(ehci, "IAA with IAAD still set?\n"); - } if (ehci->reclaim) { COUNT(ehci->stats.reclaim); end_unlink_async(ehci); -- cgit v0.10.2 From 1c1301ddd1799fbdec2fc74bd7226cfd94edff78 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Thu, 19 Apr 2012 00:04:46 +0900 Subject: usb: Fix various typo within usb Correct spelling typo within usb Signed-off-by: Masanari Iida Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index b211342..3b3932c 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -374,7 +374,7 @@ static int hidg_setup(struct usb_function *f, break; default: - VDBG(cdev, "Unknown decriptor request 0x%x\n", + VDBG(cdev, "Unknown descriptor request 0x%x\n", value >> 8); goto stall; break; diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index d238b4e2..23c530a 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -94,12 +94,12 @@ static int __devinit ehci_platform_probe(struct platform_device *dev) irq = platform_get_irq(dev, 0); if (irq < 0) { - pr_err("no irq provieded"); + pr_err("no irq provided"); return irq; } res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res_mem) { - pr_err("no memory recourse provieded"); + pr_err("no memory recourse provided"); return -ENXIO; } diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c index 0ea577b..c5ed881 100644 --- a/drivers/usb/host/fhci-tds.c +++ b/drivers/usb/host/fhci-tds.c @@ -155,7 +155,7 @@ u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, struct endpoint *ep; struct usb_td __iomem *td; unsigned long ep_offset; - char *err_for = "enpoint PRAM"; + char *err_for = "endpoint PRAM"; int ep_mem_size; u32 i; diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index ec5c679..670c705 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -93,13 +93,13 @@ static int __devinit ohci_platform_probe(struct platform_device *dev) irq = platform_get_irq(dev, 0); if (irq < 0) { - pr_err("no irq provieded"); + pr_err("no irq provided"); return irq; } res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res_mem) { - pr_err("no memory recourse provieded"); + pr_err("no memory recourse provided"); return -ENXIO; } diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index d24cc89d..b2b5767 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -236,7 +236,7 @@ MODULE_DEVICE_TABLE(of, ohci_hcd_ppc_of_match); #if !defined(CONFIG_USB_OHCI_HCD_PPC_OF_BE) && \ !defined(CONFIG_USB_OHCI_HCD_PPC_OF_LE) -#error "No endianess selected for ppc-of-ohci" +#error "No endianness selected for ppc-of-ohci" #endif -- cgit v0.10.2 From 72b27a07efe8c7d63bc117d63e2b584a26d97e7c Mon Sep 17 00:00:00 2001 From: Adhir Ramjiawan Date: Mon, 9 Apr 2012 14:01:38 +0200 Subject: USB: serial: removed assignment from if statements in ti_usb_3410_5052.c Removed the assignment statements found in if statements by the checkpatch.pl tool. Signed-off-by: Adhir Ramjiawan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index ab74123..82116f4 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -394,7 +394,9 @@ static int ti_startup(struct usb_serial *serial) /* if we have only 1 configuration, download firmware */ if (dev->descriptor.bNumConfigurations == 1) { - if ((status = ti_download_firmware(tdev)) != 0) + status = ti_download_firmware(tdev); + + if (status != 0) goto free_tdev; /* 3410 must be reset, 5052 resets itself */ @@ -1683,7 +1685,9 @@ static int ti_download_firmware(struct ti_device *tdev) /* try ID specific firmware first, then try generic firmware */ sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor, dev->descriptor.idProduct); - if ((status = request_firmware(&fw_p, buf, &dev->dev)) != 0) { + status = request_firmware(&fw_p, buf, &dev->dev); + + if (status != 0) { buf[0] = '\0'; if (dev->descriptor.idVendor == MTS_VENDOR_ID) { switch (dev->descriptor.idProduct) { -- cgit v0.10.2 From 15c9d50bbb4f754c02493fa880658d6bd5b5c27d Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 17 Apr 2012 17:08:50 +0530 Subject: USB: ehci: ohci: Add clk_{un}prepare() support clk_{un}prepare is mandatory for platforms using common clock framework. Since these drivers are used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for them. Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 2e3c89a..37ba8c8 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -26,12 +26,12 @@ struct spear_ehci { static void spear_start_ehci(struct spear_ehci *ehci) { - clk_enable(ehci->clk); + clk_prepare_enable(ehci->clk); } static void spear_stop_ehci(struct spear_ehci *ehci) { - clk_disable(ehci->clk); + clk_disable_unprepare(ehci->clk); } static int ehci_spear_setup(struct usb_hcd *hcd) diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index eb4640b..fc7305e 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -25,12 +25,12 @@ struct spear_ohci { static void spear_start_ohci(struct spear_ohci *ohci) { - clk_enable(ohci->clk); + clk_prepare_enable(ohci->clk); } static void spear_stop_ohci(struct spear_ohci *ohci) { - clk_disable(ohci->clk); + clk_disable_unprepare(ohci->clk); } static int __devinit ohci_spear_start(struct usb_hcd *hcd) -- cgit v0.10.2 From 0bf4da35b5236b585f8e4531c604accd36ed9bc2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 19 Apr 2012 15:15:43 -0700 Subject: USB: serial: visor: remove product and vendor module parameters This driver is for devices that are no longer being made, so the ability to add new device ids when loading the module is not a feature that anyone uses anymore. So remove it, which simplifies the startup code a lot, and saves space. If you still need to dynamically load device ids, that can be done through sysfs. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 71d6964..aa8911d 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -53,8 +53,6 @@ static int palm_os_4_probe(struct usb_serial *serial, /* Parameters that may be passed into the module. */ static bool debug; -static __u16 vendor; -static __u16 product; static struct usb_device_id id_table [] = { { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID), @@ -115,14 +113,12 @@ static struct usb_device_id id_table [] = { .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, - { }, /* optional parameter entry */ { } /* Terminating entry */ }; static struct usb_device_id clie_id_5_table [] = { { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, - { }, /* optional parameter entry */ { } /* Terminating entry */ }; @@ -162,7 +158,6 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID) }, { USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID) }, - { }, /* optional parameter entry */ { } /* Terminating entry */ }; @@ -648,59 +643,7 @@ static int clie_5_attach(struct usb_serial *serial) return 0; } -static int __init visor_init(void) -{ - int i, retval; - /* Only if parameters were passed to us */ - if (vendor > 0 && product > 0) { - struct usb_device_id usb_dev_temp[] = { - { - USB_DEVICE(vendor, product), - .driver_info = - (kernel_ulong_t) &palm_os_4_probe - } - }; - - /* Find the last entry in id_table */ - for (i = 0;; i++) { - if (id_table[i].idVendor == 0) { - id_table[i] = usb_dev_temp[0]; - break; - } - } - /* Find the last entry in id_table_combined */ - for (i = 0;; i++) { - if (id_table_combined[i].idVendor == 0) { - id_table_combined[i] = usb_dev_temp[0]; - break; - } - } - printk(KERN_INFO KBUILD_MODNAME - ": Untested USB device specified at time of module insertion\n"); - printk(KERN_INFO KBUILD_MODNAME - ": Warning: This is not guaranteed to work\n"); - printk(KERN_INFO KBUILD_MODNAME - ": Using a newer kernel is preferred to this method\n"); - printk(KERN_INFO KBUILD_MODNAME - ": Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x\n", - vendor, product); - } - - retval = usb_serial_register_drivers(&visor_driver, serial_drivers); - if (retval == 0) - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n"); - return retval; -} - - -static void __exit visor_exit (void) -{ - usb_serial_deregister_drivers(&visor_driver, serial_drivers); -} - - -module_init(visor_init); -module_exit(visor_exit); +module_usb_serial_driver(visor_driver, serial_drivers); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); @@ -708,9 +651,3 @@ MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); - -module_param(vendor, ushort, 0); -MODULE_PARM_DESC(vendor, "User specified vendor ID"); -module_param(product, ushort, 0); -MODULE_PARM_DESC(product, "User specified product ID"); - -- cgit v0.10.2 From cae18768acf684b505c928e5cf7ea741fac45b83 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 19 Apr 2012 15:13:59 -0700 Subject: USB: serial: ipaq: remove product and vendor module parameters This driver is for devices that are no longer being made, so the ability to add new device ids when loading the module is not a feature that anyone uses anymore. So remove it, which simplifies the startup code a lot, and saves space. If you still need to dynamically load device ids, that can be done through sysfs. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 10c02b8..bd4912f 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -33,7 +33,6 @@ #define DRIVER_AUTHOR "Ganesh Varadarajan " #define DRIVER_DESC "USB PocketPC PDA driver" -static __u16 product, vendor; static bool debug; static int connect_retries = KP_RETRIES; static int initial_wait; @@ -45,7 +44,6 @@ static int ipaq_calc_num_ports(struct usb_serial *serial); static int ipaq_startup(struct usb_serial *serial); static struct usb_device_id ipaq_id_table [] = { - /* The first entry is a placeholder for the insmod-specified device */ { USB_DEVICE(0x049F, 0x0003) }, { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */ { USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */ @@ -623,30 +621,7 @@ static int ipaq_startup(struct usb_serial *serial) return usb_reset_configuration(serial->dev); } -static int __init ipaq_init(void) -{ - int retval; - - if (vendor) { - ipaq_id_table[0].idVendor = vendor; - ipaq_id_table[0].idProduct = product; - } - - retval = usb_serial_register_drivers(&ipaq_driver, serial_drivers); - if (retval == 0) - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - return retval; -} - -static void __exit ipaq_exit(void) -{ - usb_serial_deregister_drivers(&ipaq_driver, serial_drivers); -} - - -module_init(ipaq_init); -module_exit(ipaq_exit); +module_usb_serial_driver(ipaq_driver, serial_drivers); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); @@ -655,12 +630,6 @@ MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); -module_param(vendor, ushort, 0); -MODULE_PARM_DESC(vendor, "User specified USB idVendor"); - -module_param(product, ushort, 0); -MODULE_PARM_DESC(product, "User specified USB idProduct"); - module_param(connect_retries, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(connect_retries, "Maximum number of connect retries (one second each)"); -- cgit v0.10.2 From 6d5f89c7b4fa5f8d6dc757982402c032183ffd8d Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 18 Apr 2012 15:32:46 -0600 Subject: USB: EHCI: remove PORT_RWC_BITS when clearing USB_PORT_FEAT_ENABLE In the ClearPortFeature/USB_PORT_FEAT_ENABLE case, ehci_hub_control() would read from status_reg, clear PORT_PE, and write the result back to status_reg. This would clear any bits in PORT_RWC_BITS that were set in the registers. Fix this by masking these bits off before the write. Since this masking is common across all ClearPortFeature cases, move it into a single early location to avoid duplicating it. Remove the same bugfix from ehci-tegra.c's tegra_ehci_hub_control(), now that this case is correctly handled by the core. Signed-off-by: Stephen Warren Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 8f57c6e..1e332ac 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -704,6 +704,7 @@ static int ehci_hub_control ( goto error; wIndex--; temp = ehci_readl(ehci, status_reg); + temp &= ~PORT_RWC_BITS; /* * Even if OWNER is set, so the port is owned by the @@ -717,8 +718,7 @@ static int ehci_hub_control ( ehci_writel(ehci, temp & ~PORT_PE, status_reg); break; case USB_PORT_FEAT_C_ENABLE: - ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC, - status_reg); + ehci_writel(ehci, temp | PORT_PEC, status_reg); break; case USB_PORT_FEAT_SUSPEND: if (temp & PORT_RESET) @@ -747,7 +747,7 @@ static int ehci_hub_control ( spin_lock_irqsave(&ehci->lock, flags); } /* resume signaling for 20 msec */ - temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); + temp &= ~PORT_WAKE_BITS; ehci_writel(ehci, temp | PORT_RESUME, status_reg); ehci->reset_done[wIndex] = jiffies + msecs_to_jiffies(20); @@ -757,9 +757,8 @@ static int ehci_hub_control ( break; case USB_PORT_FEAT_POWER: if (HCS_PPC (ehci->hcs_params)) - ehci_writel(ehci, - temp & ~(PORT_RWC_BITS | PORT_POWER), - status_reg); + ehci_writel(ehci, temp & ~PORT_POWER, + status_reg); break; case USB_PORT_FEAT_C_CONNECTION: if (ehci->has_lpm) { @@ -767,12 +766,10 @@ static int ehci_hub_control ( temp &= ~PORT_LPM; temp &= ~PORT_DEV_ADDR; } - ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC, - status_reg); + ehci_writel(ehci, temp | PORT_CSC, status_reg); break; case USB_PORT_FEAT_C_OVER_CURRENT: - ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC, - status_reg); + ehci_writel(ehci, temp | PORT_OCC, status_reg); break; case USB_PORT_FEAT_C_RESET: /* GetPortStatus clears reset */ diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 4c8bef6..9f81768 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -148,18 +148,7 @@ static int tegra_ehci_hub_control( spin_lock_irqsave(&ehci->lock, flags); - /* - * In ehci_hub_control() for USB_PORT_FEAT_ENABLE clears the other bits - * that are write on clear, by writing back the register read value, so - * USB_PORT_FEAT_ENABLE is handled by masking the set on clear bits - */ - if (typeReq == ClearPortFeature && wValue == USB_PORT_FEAT_ENABLE) { - temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS; - ehci_writel(ehci, temp & ~PORT_PE, status_reg); - goto done; - } - - else if (typeReq == GetPortStatus) { + if (typeReq == GetPortStatus) { temp = ehci_readl(ehci, status_reg); if (tegra->port_resuming && !(temp & PORT_SUSPEND)) { /* Resume completed, re-enable disconnect detection */ -- cgit v0.10.2 From 1f6155f5faabb7b99cb7a96abbd52e4bfcbdfc03 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 19 Apr 2012 13:46:08 +0300 Subject: USB: bcma: suspend() only takes one argument now MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We changed the API here a couple months ago. It suspend() only takes one argument now. GCC complains about this: drivers/usb/host/bcma-hcd.c:320:2: warning: initialization from incompatible pointer type [enabled by default] drivers/usb/host/bcma-hcd.c:320:2: warning: (near initialization for ‘bcma_hcd_driver.suspend’) [enabled by default] Signed-off-by: Dan Carpenter Acked-by: Hauke Mehrtens Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c index afec047..0b35d42 100644 --- a/drivers/usb/host/bcma-hcd.c +++ b/drivers/usb/host/bcma-hcd.c @@ -286,7 +286,7 @@ static void bcma_hcd_shutdown(struct bcma_device *dev) #ifdef CONFIG_PM -static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state) +static int bcma_hcd_suspend(struct bcma_device *dev) { bcma_core_disable(dev, 0); -- cgit v0.10.2 From c256667f0468ebb353c9b11b7feed5c5cba1bd9a Mon Sep 17 00:00:00 2001 From: "Steven J. Hill" Date: Thu, 19 Apr 2012 12:57:31 -0500 Subject: usb: host: mips: sead3: USB Host controller support for SEAD-3 platform. Add EHCI driver for MIPS SEAD-3 development platform. Signed-off-by: Chris Dearman Signed-off-by: Steven J. Hill Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 00b6fc8..896fc91 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -110,13 +110,14 @@ config USB_EHCI_BIG_ENDIAN_MMIO depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \ ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ PPC_MPC512x || CPU_CAVIUM_OCTEON || \ - PMC_MSP || SPARC_LEON) + PMC_MSP || SPARC_LEON || MIPS_SEAD3) default y config USB_EHCI_BIG_ENDIAN_DESC bool depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x || PMC_MSP || SPARC_LEON) + PPC_MPC512x || PMC_MSP || SPARC_LEON || \ + MIPS_SEAD3) default y config XPS_USB_HCD_XILINX diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 343f40c..9ca6359 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1364,6 +1364,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_ls1x_driver #endif +#ifdef CONFIG_MIPS_SEAD3 +#include "ehci-sead3.c" +#define PLATFORM_DRIVER ehci_hcd_sead3_driver +#endif + #ifdef CONFIG_USB_EHCI_HCD_PLATFORM #include "ehci-platform.c" #define PLATFORM_DRIVER ehci_platform_driver diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c new file mode 100644 index 0000000..4c16430 --- /dev/null +++ b/drivers/usb/host/ehci-sead3.c @@ -0,0 +1,266 @@ +/* + * MIPS CI13320A EHCI Host Controller driver + * Based on "ehci-au1xxx.c" by K.Boge + * + * Copyright (C) 2012 MIPS Technologies, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +static int ehci_sead3_setup(struct usb_hcd *hcd) +{ + int ret; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + ehci->caps = hcd->regs + 0x100; + + ret = ehci_setup(hcd); + if (ret) + return ret; + + ehci->need_io_watchdog = 0; + +#ifdef __BIG_ENDIAN + ehci->big_endian_mmio = 1; + ehci->big_endian_desc = 1; +#endif + + /* Set burst length to 16 words. */ + ehci_writel(ehci, 0x1010, &ehci->regs->reserved[1]); + + return ret; +} + +const struct hc_driver ehci_sead3_hc_driver = { + .description = hcd_name, + .product_desc = "SEAD-3 EHCI", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + * + */ + .reset = ehci_sead3_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct resource *res; + int ret; + + if (usb_disabled()) + return -ENODEV; + + if (pdev->resource[1].flags != IORESOURCE_IRQ) { + pr_debug("resource[1] is not IORESOURCE_IRQ"); + return -ENOMEM; + } + hcd = usb_create_hcd(&ehci_sead3_hc_driver, &pdev->dev, "SEAD-3"); + if (!hcd) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + pr_debug("request_mem_region failed"); + ret = -EBUSY; + goto err1; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + pr_debug("ioremap failed"); + ret = -ENOMEM; + goto err2; + } + + /* Root hub has integrated TT. */ + hcd->has_tt = 1; + + ret = usb_add_hcd(hcd, pdev->resource[1].start, + IRQF_SHARED); + if (ret == 0) { + platform_set_drvdata(pdev, hcd); + return ret; + } + + iounmap(hcd->regs); +err2: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err1: + usb_put_hcd(hcd); + return ret; +} + +static int ehci_hcd_sead3_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int ehci_hcd_sead3_drv_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + unsigned long flags; + int rc = 0; + + if (time_before(jiffies, ehci->next_statechange)) + msleep(20); + + /* Root hub was already suspended. Disable irq emission and + * mark HW unaccessible. The PM and USB cores make sure that + * the root hub is either suspended or stopped. + */ + ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); + spin_lock_irqsave(&ehci->lock, flags); + ehci_writel(ehci, 0, &ehci->regs->intr_enable); + (void)ehci_readl(ehci, &ehci->regs->intr_enable); + + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + spin_unlock_irqrestore(&ehci->lock, flags); + + /* could save FLADJ in case of Vaux power loss + * ... we'd only use it to handle clock skew + */ + + return rc; +} + +static int ehci_hcd_sead3_drv_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + /* maybe restore FLADJ. */ + + if (time_before(jiffies, ehci->next_statechange)) + msleep(100); + + /* Mark hardware accessible again as we are out of D3 state by now */ + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + /* If CF is still set, we maintained PCI Vaux power. + * Just undo the effect of ehci_pci_suspend(). + */ + if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) { + int mask = INTR_MASK; + + ehci_prepare_ports_for_controller_resume(ehci); + if (!hcd->self.root_hub->do_remote_wakeup) + mask &= ~STS_PCD; + ehci_writel(ehci, mask, &ehci->regs->intr_enable); + ehci_readl(ehci, &ehci->regs->intr_enable); + return 0; + } + + ehci_dbg(ehci, "lost power, restarting\n"); + usb_root_hub_lost_power(hcd->self.root_hub); + + /* Else reset, to cope with power loss or flush-to-storage + * style "resume" having let BIOS kick in during reboot. + */ + (void) ehci_halt(ehci); + (void) ehci_reset(ehci); + + /* emptying the schedule aborts any urbs */ + spin_lock_irq(&ehci->lock); + if (ehci->reclaim) + end_unlink_async(ehci); + ehci_work(ehci); + spin_unlock_irq(&ehci->lock); + + ehci_writel(ehci, ehci->command, &ehci->regs->command); + ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); + ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ + + /* here we "know" root ports should always stay powered */ + ehci_port_power(ehci, 1); + + ehci->rh_state = EHCI_RH_SUSPENDED; + + return 0; +} + +static const struct dev_pm_ops sead3_ehci_pmops = { + .suspend = ehci_hcd_sead3_drv_suspend, + .resume = ehci_hcd_sead3_drv_resume, +}; + +#define SEAD3_EHCI_PMOPS (&sead3_ehci_pmops) + +#else +#define SEAD3_EHCI_PMOPS NULL +#endif + +static struct platform_driver ehci_hcd_sead3_driver = { + .probe = ehci_hcd_sead3_drv_probe, + .remove = ehci_hcd_sead3_drv_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "sead3-ehci", + .owner = THIS_MODULE, + .pm = SEAD3_EHCI_PMOPS, + } +}; + +MODULE_ALIAS("platform:sead3-ehci"); -- cgit v0.10.2 From 0eafe4de1a689b69d3f0ce0b5d4aa5333208fd4a Mon Sep 17 00:00:00 2001 From: Donald Date: Thu, 19 Apr 2012 15:00:45 +0800 Subject: USB: serial: mos7840: add support for MCS7810 devices This patch added the support of MCS7810 device for the mos7840 driver. The MCS7810 device supports single USB2.0-to-Serial port with a LED indicator for reflecting transmission or reception activity. Signed-off-by: Donald Lee Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index c526550..aaef523 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -114,6 +114,7 @@ #define USB_VENDOR_ID_MOSCHIP 0x9710 #define MOSCHIP_DEVICE_ID_7840 0x7840 #define MOSCHIP_DEVICE_ID_7820 0x7820 +#define MOSCHIP_DEVICE_ID_7810 0x7810 /* The native component can have its vendor/device id's overridden * in vendor-specific implementations. Such devices can be handled * by making a change here, in moschip_port_id_table, and in @@ -184,10 +185,16 @@ #define NUM_URBS 16 /* URB Count */ #define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ +/* LED on/off milliseconds*/ +#define LED_ON_MS 500 +#define LED_OFF_MS 500 + +static int device_type; static const struct usb_device_id moschip_port_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, + {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)}, @@ -209,6 +216,7 @@ static const struct usb_device_id moschip_port_id_table[] = { static const struct usb_device_id moschip_id_table_combined[] __devinitconst = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, + {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)}, @@ -261,8 +269,13 @@ struct moschip_port { struct urb *write_urb_pool[NUM_URBS]; char busy[NUM_URBS]; bool read_urb_busy; -}; + /* For device(s) with LED indicator */ + bool has_led; + bool led_flag; + struct timer_list led_timer1; /* Timer for LED on */ + struct timer_list led_timer2; /* Timer for LED off */ +}; static bool debug; @@ -572,6 +585,69 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, return ret; } +static void mos7840_set_led_callback(struct urb *urb) +{ + switch (urb->status) { + case 0: + /* Success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* This urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __func__, + urb->status); + break; + default: + dbg("%s - nonzero urb status received: %d", __func__, + urb->status); + } +} + +static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval, + __u16 reg) +{ + struct usb_device *dev = mcs->port->serial->dev; + struct usb_ctrlrequest *dr = mcs->dr; + + dr->bRequestType = MCS_WR_RTYPE; + dr->bRequest = MCS_WRREQ; + dr->wValue = cpu_to_le16(wval); + dr->wIndex = cpu_to_le16(reg); + dr->wLength = cpu_to_le16(0); + + usb_fill_control_urb(mcs->control_urb, dev, usb_sndctrlpipe(dev, 0), + (unsigned char *)dr, NULL, 0, mos7840_set_led_callback, NULL); + + usb_submit_urb(mcs->control_urb, GFP_ATOMIC); +} + +static void mos7840_set_led_sync(struct usb_serial_port *port, __u16 reg, + __u16 val) +{ + struct usb_device *dev = port->serial->dev; + + usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, MCS_WR_RTYPE, + val, reg, NULL, 0, MOS_WDR_TIMEOUT); +} + +static void mos7840_led_off(unsigned long arg) +{ + struct moschip_port *mcs = (struct moschip_port *) arg; + + /* Turn off LED */ + mos7840_set_led_async(mcs, 0x0300, MODEM_CONTROL_REGISTER); + mod_timer(&mcs->led_timer2, + jiffies + msecs_to_jiffies(LED_OFF_MS)); +} + +static void mos7840_led_flag_off(unsigned long arg) +{ + struct moschip_port *mcs = (struct moschip_port *) arg; + + mcs->led_flag = false; +} + /***************************************************************************** * mos7840_interrupt_callback * this is the callback function for when we have received data on the @@ -792,6 +868,14 @@ static void mos7840_bulk_in_callback(struct urb *urb) return; } + /* Turn on LED */ + if (mos7840_port->has_led && !mos7840_port->led_flag) { + mos7840_port->led_flag = true; + mos7840_set_led_async(mos7840_port, 0x0301, + MODEM_CONTROL_REGISTER); + mod_timer(&mos7840_port->led_timer1, + jiffies + msecs_to_jiffies(LED_ON_MS)); + } mos7840_port->read_urb_busy = true; retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); @@ -1554,6 +1638,14 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, data1 = urb->transfer_buffer; dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress); + /* Turn on LED */ + if (mos7840_port->has_led && !mos7840_port->led_flag) { + mos7840_port->led_flag = true; + mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0301); + mod_timer(&mos7840_port->led_timer1, + jiffies + msecs_to_jiffies(LED_ON_MS)); + } + /* send it down the pipe */ status = usb_submit_urb(urb, GFP_ATOMIC); @@ -2327,28 +2419,74 @@ static int mos7840_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } +static int mos7810_check(struct usb_serial *serial) +{ + int i, pass_count = 0; + __u16 data = 0, mcr_data = 0; + __u16 test_pattern = 0x55AA; + + /* Store MCR setting */ + usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER, + &mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + + for (i = 0; i < 16; i++) { + /* Send the 1-bit test pattern out to MCS7810 test pin */ + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + MCS_WRREQ, MCS_WR_RTYPE, + (0x0300 | (((test_pattern >> i) & 0x0001) << 1)), + MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); + + /* Read the test pattern back */ + usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + + /* If this is a MCS7810 device, both test patterns must match */ + if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001) + break; + + pass_count++; + } + + /* Restore MCR setting */ + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCS_WRREQ, + MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL, + 0, MOS_WDR_TIMEOUT); + + if (pass_count == 16) + return 1; + + return 0; +} + static int mos7840_calc_num_ports(struct usb_serial *serial) { - __u16 Data = 0x00; - int ret = 0; + __u16 data = 0x00; int mos7840_num_ports; - ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &Data, + usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); - if ((Data & 0x01) == 0) { - mos7840_num_ports = 2; - serial->num_bulk_in = 2; - serial->num_bulk_out = 2; - serial->num_ports = 2; + if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 || + serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) { + device_type = serial->dev->descriptor.idProduct; } else { - mos7840_num_ports = 4; - serial->num_bulk_in = 4; - serial->num_bulk_out = 4; - serial->num_ports = 4; + /* For a MCS7840 device GPIO0 must be set to 1 */ + if ((data & 0x01) == 1) + device_type = MOSCHIP_DEVICE_ID_7840; + else if (mos7810_check(serial)) + device_type = MOSCHIP_DEVICE_ID_7810; + else + device_type = MOSCHIP_DEVICE_ID_7820; } + mos7840_num_ports = (device_type >> 4) & 0x000F; + serial->num_bulk_in = mos7840_num_ports; + serial->num_bulk_out = mos7840_num_ports; + serial->num_ports = mos7840_num_ports; + return mos7840_num_ports; } @@ -2563,6 +2701,34 @@ static int mos7840_startup(struct usb_serial *serial) status = -ENOMEM; goto error; } + + mos7840_port->has_led = false; + + /* Initialize LED timers */ + if (device_type == MOSCHIP_DEVICE_ID_7810) { + mos7840_port->has_led = true; + + init_timer(&mos7840_port->led_timer1); + mos7840_port->led_timer1.function = mos7840_led_off; + mos7840_port->led_timer1.expires = + jiffies + msecs_to_jiffies(LED_ON_MS); + mos7840_port->led_timer1.data = + (unsigned long)mos7840_port; + + init_timer(&mos7840_port->led_timer2); + mos7840_port->led_timer2.function = + mos7840_led_flag_off; + mos7840_port->led_timer2.expires = + jiffies + msecs_to_jiffies(LED_OFF_MS); + mos7840_port->led_timer2.data = + (unsigned long)mos7840_port; + + mos7840_port->led_flag = false; + + /* Turn off LED */ + mos7840_set_led_sync(serial->port[i], + MODEM_CONTROL_REGISTER, 0x0300); + } } dbg ("mos7840_startup: all ports configured..........."); @@ -2654,6 +2820,14 @@ static void mos7840_release(struct usb_serial *serial) mos7840_port = mos7840_get_port_private(serial->port[i]); dbg("mos7840_port %d = %p", i, mos7840_port); if (mos7840_port) { + if (mos7840_port->has_led) { + /* Turn off LED */ + mos7840_set_led_sync(mos7840_port->port, + MODEM_CONTROL_REGISTER, 0x0300); + + del_timer_sync(&mos7840_port->led_timer1); + del_timer_sync(&mos7840_port->led_timer2); + } kfree(mos7840_port->ctrl_buf); kfree(mos7840_port->dr); kfree(mos7840_port); -- cgit v0.10.2 From b9ee17b7f5a975323a5aa955c4f669ef185bb2fd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 08:41:02 -0700 Subject: USB: serial: ipaq: delete duplicate id MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With the recent change to remove the module parameters from the ipaq driver, we ended up with a duplicate id in the driver. This patch removes it. Reported-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index bd4912f..61e200f 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -44,7 +44,6 @@ static int ipaq_calc_num_ports(struct usb_serial *serial); static int ipaq_startup(struct usb_serial *serial); static struct usb_device_id ipaq_id_table [] = { - { USB_DEVICE(0x049F, 0x0003) }, { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */ { USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */ { USB_DEVICE(0x03F0, 0x1116) }, /* HP USB Sync 1611 */ -- cgit v0.10.2 From fc433dea4df4633b2277bc46c012b2a5a5fbdd0e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:17 -0700 Subject: USB: asus_oled.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Jakub Schmidtke CC: Pekka Paalanen CC: Peter Huewe CC: "Ken O'Brien" Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c index 83549d9..510d796 100644 --- a/drivers/staging/asus_oled/asus_oled.c +++ b/drivers/staging/asus_oled/asus_oled.c @@ -782,20 +782,20 @@ static int __init asus_oled_init(void) oled_class = class_create(THIS_MODULE, ASUS_OLED_UNDERSCORE_NAME); if (IS_ERR(oled_class)) { - err("Error creating " ASUS_OLED_UNDERSCORE_NAME " class"); + printk(KERN_ERR "Error creating " ASUS_OLED_UNDERSCORE_NAME " class\n"); return PTR_ERR(oled_class); } retval = class_create_file(oled_class, &class_attr_version.attr); if (retval) { - err("Error creating class version file"); + printk(KERN_ERR "Error creating class version file\n"); goto error; } retval = usb_register(&oled_driver); if (retval) { - err("usb_register failed. Error number %d", retval); + printk(KERN_ERR "usb_register failed. Error number %d\n", retval); goto error; } -- cgit v0.10.2 From de15fe3ed9c3d959adb6c3ccd28dc63f4a1337a9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:19 -0700 Subject: USB: dt9812.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Ian Abbott CC: Mori Hess CC: Dan Carpenter Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c index e86ab58..89a49dd 100644 --- a/drivers/staging/comedi/drivers/dt9812.c +++ b/drivers/staging/comedi/drivers/dt9812.c @@ -547,7 +547,7 @@ static void dt9812_configure_gain(struct usb_dt9812 *dev, rmw->or_value = F020_MASK_ADC0CF_AMP0GN2; break; default: - err("Illegal gain %d\n", gain); + dev_err(&dev->interface->dev, "Illegal gain %d\n", gain); } } @@ -715,7 +715,7 @@ static int dt9812_probe(struct usb_interface *interface, iface_desc = interface->cur_altsetting; if (iface_desc->desc.bNumEndpoints != 5) { - err("Wrong number of endpints."); + dev_err(&interface->dev, "Wrong number of endpoints.\n"); retval = -ENODEV; goto error; } @@ -781,22 +781,22 @@ static int dt9812_probe(struct usb_interface *interface, } if (dt9812_read_info(dev, 1, &dev->vendor, sizeof(dev->vendor)) != 0) { - err("Failed to read vendor."); + dev_err(&interface->dev, "Failed to read vendor.\n"); retval = -ENODEV; goto error; } if (dt9812_read_info(dev, 3, &dev->product, sizeof(dev->product)) != 0) { - err("Failed to read product."); + dev_err(&interface->dev, "Failed to read product.\n"); retval = -ENODEV; goto error; } if (dt9812_read_info(dev, 5, &dev->device, sizeof(dev->device)) != 0) { - err("Failed to read device."); + dev_err(&interface->dev, "Failed to read device.\n"); retval = -ENODEV; goto error; } if (dt9812_read_info(dev, 7, &dev->serial, sizeof(dev->serial)) != 0) { - err("Failed to read serial."); + dev_err(&interface->dev, "Failed to read serial.\n"); retval = -ENODEV; goto error; } @@ -1146,7 +1146,9 @@ static int __init usb_dt9812_init(void) result = comedi_driver_register(&dt9812_comedi_driver); if (result) { usb_deregister(&dt9812_usb_driver); - err("comedi_driver_register failed. Error number %d", result); + printk(KERN_ERR KBUILD_MODNAME + ": comedi_driver_register failed. Error number %d\n", + result); } return result; -- cgit v0.10.2 From b864cbe7c7d2e9db04ff89a9a0da1035afe8081b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:22 -0700 Subject: USB: vmk80xx.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Ian Abbott CC: Mori Hess CC: "J. Ali Harlow" Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c index 3d13ca6e1..2dba3ef 100644 --- a/drivers/staging/comedi/drivers/vmk80xx.c +++ b/drivers/staging/comedi/drivers/vmk80xx.c @@ -295,7 +295,9 @@ resubmit: if (!usb_submit_urb(urb, GFP_KERNEL)) goto exit; - err("comedi#: vmk80xx: %s - submit urb failed\n", __func__); + dev_err(&urb->dev->dev, + "comedi#: vmk80xx: %s - submit urb failed\n", + __func__); usb_unanchor_urb(urb); } -- cgit v0.10.2 From 905438fe9b26af93fb4efcf1b786f8b8f4d6f775 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:24 -0700 Subject: USB: alphatrack.c: remove err() usage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: "David Täht" CC: Hitoshi Nakamori Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/frontier/alphatrack.c b/drivers/staging/frontier/alphatrack.c index 3bf0f40e..acbb2cc 100644 --- a/drivers/staging/frontier/alphatrack.c +++ b/drivers/staging/frontier/alphatrack.c @@ -333,8 +333,8 @@ static int usb_alphatrack_open(struct inode *inode, struct file *file) interface = usb_find_interface(&usb_alphatrack_driver, subminor); if (!interface) { - err("%s - error, can't find device for minor %d\n", - __func__, subminor); + printk(KERN_ERR "%s - error, can't find device for minor %d\n", + __func__, subminor); retval = -ENODEV; goto unlock_disconnect_exit; } @@ -494,7 +494,8 @@ static ssize_t usb_alphatrack_read(struct file *file, char __user *buffer, /* verify that the device wasn't unplugged */ if (dev->intf == NULL) { retval = -ENODEV; - err("No device or device unplugged %d\n", retval); + printk(KERN_ERR "%s: No device or device unplugged %d\n", + __func__, retval); goto unlock_exit; } @@ -564,7 +565,8 @@ static ssize_t usb_alphatrack_write(struct file *file, /* verify that the device wasn't unplugged */ if (dev->intf == NULL) { retval = -ENODEV; - err("No device or device unplugged %d\n", retval); + printk(KERN_ERR "%s: No device or device unplugged %d\n", + __func__, retval); goto unlock_exit; } @@ -599,7 +601,7 @@ static ssize_t usb_alphatrack_write(struct file *file, } if (dev->interrupt_out_endpoint == NULL) { - err("Endpoint should not be be null!\n"); + dev_err(&dev->intf->dev, "Endpoint should not be be null!\n"); goto unlock_exit; } @@ -619,7 +621,8 @@ static ssize_t usb_alphatrack_write(struct file *file, retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL); if (retval) { dev->interrupt_out_busy = 0; - err("Couldn't submit interrupt_out_urb %d\n", retval); + dev_err(&dev->intf->dev, + "Couldn't submit interrupt_out_urb %d\n", retval); atomic_dec(&dev->writes_pending); goto unlock_exit; } -- cgit v0.10.2 From c2705c0d2d8776e7e51dd0dfa8edf9e6c629902b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:27 -0700 Subject: USB: tranzport.c: remove err() usage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: "David Täht" CC: Hitoshi Nakamori CC: "Ken O'Brien" Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c index 29e99bb..376706f 100644 --- a/drivers/staging/frontier/tranzport.c +++ b/drivers/staging/frontier/tranzport.c @@ -353,7 +353,7 @@ static int usb_tranzport_open(struct inode *inode, struct file *file) interface = usb_find_interface(&usb_tranzport_driver, subminor); if (!interface) { - err("%s - error, can't find device for minor %d\n", + printk(KERN_ERR "%s - error, can't find device for minor %d\n", __func__, subminor); retval = -ENODEV; goto unlock_disconnect_exit; @@ -517,9 +517,11 @@ static ssize_t usb_tranzport_read(struct file *file, char __user *buffer, goto exit; } - /* verify that the device wasn't unplugged */ if (dev->intf == NULL) { + /* verify that the device wasn't unplugged */ + if (dev->intf == NULL) { retval = -ENODEV; - err("No device or device unplugged %d\n", retval); + printk(KERN_ERR "%s: No device or device unplugged %d\n", + __func__, retval); goto unlock_exit; } @@ -691,7 +693,8 @@ static ssize_t usb_tranzport_write(struct file *file, /* verify that the device wasn't unplugged */ if (dev->intf == NULL) { retval = -ENODEV; - err("No device or device unplugged %d\n", retval); + printk(KERN_ERR "%s: No device or device unplugged %d\n", + __func__, retval); goto unlock_exit; } @@ -726,7 +729,7 @@ static ssize_t usb_tranzport_write(struct file *file, } if (dev->interrupt_out_endpoint == NULL) { - err("Endpoint should not be be null!\n"); + dev_err(&dev->intf->dev, "Endpoint should not be be null!\n"); goto unlock_exit; } @@ -746,7 +749,8 @@ static ssize_t usb_tranzport_write(struct file *file, retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL); if (retval) { dev->interrupt_out_busy = 0; - err("Couldn't submit interrupt_out_urb %d\n", retval); + dev_err(&dev->intf->dev, + "Couldn't submit interrupt_out_urb %d\n", retval); goto unlock_exit; } retval = bytes_to_write; -- cgit v0.10.2 From 2b8dec323d3409308817820247222806d0356cdf Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:29 -0700 Subject: USB: driver.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Markus Grabner CC: Stefan Hajnoczi CC: Julia Lawall CC: Dan Carpenter Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/line6/driver.c b/drivers/staging/line6/driver.c index e8023af..2e602e1 100644 --- a/drivers/staging/line6/driver.c +++ b/drivers/staging/line6/driver.c @@ -1307,7 +1307,8 @@ static int __init line6_init(void) retval = usb_register(&line6_driver); if (retval) { - err("usb_register failed. Error number %d", retval); + printk(KERN_ERR KBUILD_MODNAME + ": usb_register failed. Error number %d\n", retval); return retval; } @@ -1315,7 +1316,7 @@ static int __init line6_init(void) GFP_KERNEL); if (line6_request_version == NULL) { - err("Out of memory"); + printk(KERN_ERR KBUILD_MODNAME ":Out of memory\n"); return -ENOMEM; } -- cgit v0.10.2 From d86938fb63a9189cedfd3509cafc4b1def68703d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:32 -0700 Subject: USB: toneport.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Markus Grabner CC: Stefan Hajnoczi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/line6/toneport.c b/drivers/staging/line6/toneport.c index b754f69..31b624b 100644 --- a/drivers/staging/line6/toneport.c +++ b/drivers/staging/line6/toneport.c @@ -168,7 +168,7 @@ static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2) cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ); if (ret < 0) { - err("send failed (error %d)\n", ret); + dev_err(&usbdev->dev, "send failed (error %d)\n", ret); return ret; } -- cgit v0.10.2 From 68980793b283a66488d8949b5cd7a2f09e8f874f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:35 -0700 Subject: USB: oxu210hp-hcd.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Rusty Russell CC: David Howells CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 3b38030..77a5225 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -2991,8 +2991,9 @@ static int oxu_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) /* shouldn't happen often, but ... * FIXME kill those tds' urbs */ - err("can't reschedule qh %p, err %d", - qh, status); + dev_err(hcd->self.controller, + "can't reschedule qh %p, err %d\n", qh, + status); } return status; } -- cgit v0.10.2 From b412284b969845615e860001b2f34614ece1d576 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:37 -0700 Subject: USB: emi26.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Paul Gortmaker CC: Andrew Morton CC: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c index da97dce..d65984d 100644 --- a/drivers/usb/misc/emi26.c +++ b/drivers/usb/misc/emi26.c @@ -78,18 +78,14 @@ static int emi26_load_firmware (struct usb_device *dev) const struct firmware *bitstream_fw = NULL; const struct firmware *firmware_fw = NULL; const struct ihex_binrec *rec; - int err; + int err = -ENOMEM; int i; __u32 addr; /* Address to write */ __u8 *buf; buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL); - if (!buf) { - dev_err(&dev->dev, "%s - error loading firmware: error = %d\n", - __func__, -ENOMEM); - err = -ENOMEM; + if (!buf) goto wraperr; - } err = request_ihex_firmware(&loader_fw, "emi26/loader.fw", &dev->dev); if (err) @@ -111,11 +107,8 @@ static int emi26_load_firmware (struct usb_device *dev) /* Assert reset (stop the CPU in the EMI) */ err = emi26_set_reset(dev,1); - if (err < 0) { - dev_err(&dev->dev,"%s - error loading firmware: error = %d\n", - __func__, err); + if (err < 0) goto wraperr; - } rec = (const struct ihex_binrec *)loader_fw->data; /* 1. We need to put the loader for the FPGA into the EZ-USB */ @@ -123,19 +116,15 @@ static int emi26_load_firmware (struct usb_device *dev) err = emi26_writememory(dev, be32_to_cpu(rec->addr), rec->data, be16_to_cpu(rec->len), ANCHOR_LOAD_INTERNAL); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } rec = ihex_next_binrec(rec); } /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } msleep(250); /* let device settle */ /* 2. We upload the FPGA firmware into the EMI @@ -153,18 +142,14 @@ static int emi26_load_firmware (struct usb_device *dev) rec = ihex_next_binrec(rec); } err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } } while (rec); /* Assert reset (stop the CPU in the EMI) */ err = emi26_set_reset(dev,1); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } /* 3. We need to put the loader for the firmware into the EZ-USB (again...) */ for (rec = (const struct ihex_binrec *)loader_fw->data; @@ -172,19 +157,15 @@ static int emi26_load_firmware (struct usb_device *dev) err = emi26_writememory(dev, be32_to_cpu(rec->addr), rec->data, be16_to_cpu(rec->len), ANCHOR_LOAD_INTERNAL); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } } msleep(250); /* let device settle */ /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */ @@ -194,19 +175,15 @@ static int emi26_load_firmware (struct usb_device *dev) err = emi26_writememory(dev, be32_to_cpu(rec->addr), rec->data, be16_to_cpu(rec->len), ANCHOR_LOAD_EXTERNAL); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } } } - + /* Assert reset (stop the CPU in the EMI) */ err = emi26_set_reset(dev,1); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } for (rec = (const struct ihex_binrec *)firmware_fw->data; rec; rec = ihex_next_binrec(rec)) { @@ -214,19 +191,15 @@ static int emi26_load_firmware (struct usb_device *dev) err = emi26_writememory(dev, be32_to_cpu(rec->addr), rec->data, be16_to_cpu(rec->len), ANCHOR_LOAD_INTERNAL); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } } } /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } msleep(250); /* let device settle */ /* return 1 to fail the driver inialization @@ -234,6 +207,10 @@ static int emi26_load_firmware (struct usb_device *dev) err = 1; wraperr: + if (err < 0) + dev_err(&dev->dev,"%s - error loading firmware: error = %d\n", + __func__, err); + release_firmware(loader_fw); release_firmware(bitstream_fw); release_firmware(firmware_fw); -- cgit v0.10.2 From e9a527dae346c0ad56410c3794ba5ec535c66bcc Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:40 -0700 Subject: USB: emi62.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Paul Gortmaker CC: Andrew Morton CC: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 4e0f167..ff08015 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -56,7 +56,7 @@ static int emi62_writememory(struct usb_device *dev, int address, unsigned char *buffer = kmemdup(data, length, GFP_KERNEL); if (!buffer) { - err("emi62: kmalloc(%d) failed.", length); + dev_err(&dev->dev, "kmalloc(%d) failed.\n", length); return -ENOMEM; } /* Note: usb_control_msg returns negative value on error or length of the @@ -73,9 +73,8 @@ static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit) dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit); response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0); - if (response < 0) { - err("emi62: set_reset (%d) failed", reset_bit); - } + if (response < 0) + dev_err(&dev->dev, "set_reset (%d) failed\n", reset_bit); return response; } @@ -87,18 +86,15 @@ static int emi62_load_firmware (struct usb_device *dev) const struct firmware *bitstream_fw = NULL; const struct firmware *firmware_fw = NULL; const struct ihex_binrec *rec; - int err; + int err = -ENOMEM; int i; __u32 addr; /* Address to write */ __u8 *buf; dev_dbg(&dev->dev, "load_firmware\n"); buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL); - if (!buf) { - err( "%s - error loading firmware: error = %d", __func__, -ENOMEM); - err = -ENOMEM; + if (!buf) goto wraperr; - } err = request_ihex_firmware(&loader_fw, "emi62/loader.fw", &dev->dev); if (err) @@ -112,16 +108,13 @@ static int emi62_load_firmware (struct usb_device *dev) err = request_ihex_firmware(&firmware_fw, FIRMWARE_FW, &dev->dev); if (err) { nofw: - err( "%s - request_firmware() failed", __func__); goto wraperr; } /* Assert reset (stop the CPU in the EMI) */ err = emi62_set_reset(dev,1); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } rec = (const struct ihex_binrec *)loader_fw->data; @@ -130,19 +123,15 @@ static int emi62_load_firmware (struct usb_device *dev) err = emi62_writememory(dev, be32_to_cpu(rec->addr), rec->data, be16_to_cpu(rec->len), ANCHOR_LOAD_INTERNAL); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } rec = ihex_next_binrec(rec); } /* De-assert reset (let the CPU run) */ err = emi62_set_reset(dev,0); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } msleep(250); /* let device settle */ /* 2. We upload the FPGA firmware into the EMI @@ -160,18 +149,14 @@ static int emi62_load_firmware (struct usb_device *dev) rec = ihex_next_binrec(rec); } err = emi62_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } } while (rec); /* Assert reset (stop the CPU in the EMI) */ err = emi62_set_reset(dev,1); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } /* 3. We need to put the loader for the firmware into the EZ-USB (again...) */ for (rec = (const struct ihex_binrec *)loader_fw->data; @@ -179,18 +164,14 @@ static int emi62_load_firmware (struct usb_device *dev) err = emi62_writememory(dev, be32_to_cpu(rec->addr), rec->data, be16_to_cpu(rec->len), ANCHOR_LOAD_INTERNAL); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } } /* De-assert reset (let the CPU run) */ err = emi62_set_reset(dev,0); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } msleep(250); /* let device settle */ /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */ @@ -201,19 +182,15 @@ static int emi62_load_firmware (struct usb_device *dev) err = emi62_writememory(dev, be32_to_cpu(rec->addr), rec->data, be16_to_cpu(rec->len), ANCHOR_LOAD_EXTERNAL); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } } } /* Assert reset (stop the CPU in the EMI) */ err = emi62_set_reset(dev,1); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } for (rec = (const struct ihex_binrec *)firmware_fw->data; rec; rec = ihex_next_binrec(rec)) { @@ -221,19 +198,15 @@ static int emi62_load_firmware (struct usb_device *dev) err = emi62_writememory(dev, be32_to_cpu(rec->addr), rec->data, be16_to_cpu(rec->len), ANCHOR_LOAD_EXTERNAL); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } } } /* De-assert reset (let the CPU run) */ err = emi62_set_reset(dev,0); - if (err < 0) { - err("%s - error loading firmware: error = %d", __func__, err); + if (err < 0) goto wraperr; - } msleep(250); /* let device settle */ release_firmware(loader_fw); @@ -247,6 +220,9 @@ static int emi62_load_firmware (struct usb_device *dev) return 1; wraperr: + if (err < 0) + dev_err(&dev->dev,"%s - error loading firmware: error = %d\n", + __func__, err); release_firmware(loader_fw); release_firmware(bitstream_fw); release_firmware(firmware_fw); -- cgit v0.10.2 From ef1ffb7296a19958b7575b382b7b0343bd441646 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:42 -0700 Subject: USB: idmouse.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Kuninori Morimoto CC: Sarah Sharp CC: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 0dee246..c00fcd7 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -366,14 +366,14 @@ static int idmouse_probe(struct usb_interface *interface, kmalloc(IMGSIZE + dev->bulk_in_size, GFP_KERNEL); if (!dev->bulk_in_buffer) { - err("Unable to allocate input buffer."); + dev_err(&interface->dev, "Unable to allocate input buffer.\n"); idmouse_delete(dev); return -ENOMEM; } } if (!(dev->bulk_in_endpointAddr)) { - err("Unable to find bulk-in endpoint."); + dev_err(&interface->dev, "Unable to find bulk-in endpoint.\n"); idmouse_delete(dev); return -ENODEV; } @@ -385,7 +385,7 @@ static int idmouse_probe(struct usb_interface *interface, result = usb_register_dev(interface, &idmouse_class); if (result) { /* something prevented us from registering this device */ - err("Unble to allocate minor number."); + dev_err(&interface->dev, "Unble to allocate minor number.\n"); usb_set_intfdata(interface, NULL); idmouse_delete(dev); return result; -- cgit v0.10.2 From 1c2eef03e498e92a924972ba237559b6798943d8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:45 -0700 Subject: USB: iowarrior.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Rusty Russell CC: Kuninori Morimoto CC: Mauro Carvalho Chehab CC: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 4fd0dc8..db46143 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -610,8 +610,8 @@ static int iowarrior_open(struct inode *inode, struct file *file) interface = usb_find_interface(&iowarrior_driver, subminor); if (!interface) { mutex_unlock(&iowarrior_mutex); - err("%s - error, can't find device for minor %d", __func__, - subminor); + printk(KERN_ERR "%s - error, can't find device for minor %d\n", + __func__, subminor); return -ENODEV; } -- cgit v0.10.2 From b22862e5197ea6471f37710bd3a853a4802c6bf4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:47 -0700 Subject: USB: ldusb.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Michael Hund CC: Kuninori Morimoto CC: Sarah Sharp CC: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 5db4ab5..ac76229 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -334,8 +334,8 @@ static int ld_usb_open(struct inode *inode, struct file *file) interface = usb_find_interface(&ld_usb_driver, subminor); if (!interface) { - err("%s - error, can't find device for minor %d\n", - __func__, subminor); + printk(KERN_ERR "%s - error, can't find device for minor %d\n", + __func__, subminor); return -ENODEV; } @@ -485,7 +485,7 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count, /* verify that the device wasn't unplugged */ if (dev->intf == NULL) { retval = -ENODEV; - err("No device or device unplugged %d\n", retval); + printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval); goto unlock_exit; } @@ -565,7 +565,7 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer, /* verify that the device wasn't unplugged */ if (dev->intf == NULL) { retval = -ENODEV; - err("No device or device unplugged %d\n", retval); + printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval); goto unlock_exit; } @@ -603,7 +603,9 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer, bytes_to_write, USB_CTRL_SET_TIMEOUT * HZ); if (retval < 0) - err("Couldn't submit HID_REQ_SET_REPORT %d\n", retval); + dev_err(&dev->intf->dev, + "Couldn't submit HID_REQ_SET_REPORT %d\n", + retval); goto unlock_exit; } @@ -624,7 +626,8 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer, retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL); if (retval) { dev->interrupt_out_busy = 0; - err("Couldn't submit interrupt_out_urb %d\n", retval); + dev_err(&dev->intf->dev, + "Couldn't submit interrupt_out_urb %d\n", retval); goto unlock_exit; } retval = bytes_to_write; -- cgit v0.10.2 From 9d974b2a06e34646f1787a1bbc7ffe7de61c23ef Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:48 -0700 Subject: USB: legousbtower.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Juergen Stuber Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 5752220..a2702cb 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -354,8 +354,8 @@ static int tower_open (struct inode *inode, struct file *file) interface = usb_find_interface (&tower_driver, subminor); if (!interface) { - err ("%s - error, can't find device for minor %d", - __func__, subminor); + printk(KERN_ERR "%s - error, can't find device for minor %d\n", + __func__, subminor); retval = -ENODEV; goto exit; } @@ -397,7 +397,8 @@ static int tower_open (struct inode *inode, struct file *file) sizeof(reset_reply), 1000); if (result < 0) { - err("LEGO USB Tower reset control request failed"); + dev_err(&dev->udev->dev, + "LEGO USB Tower reset control request failed\n"); retval = result; goto unlock_exit; } @@ -420,7 +421,8 @@ static int tower_open (struct inode *inode, struct file *file) retval = usb_submit_urb (dev->interrupt_in_urb, GFP_KERNEL); if (retval) { - err("Couldn't submit interrupt_in_urb %d", retval); + dev_err(&dev->udev->dev, + "Couldn't submit interrupt_in_urb %d\n", retval); dev->interrupt_in_running = 0; dev->open_count = 0; goto unlock_exit; @@ -608,7 +610,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, /* verify that the device wasn't unplugged */ if (dev->udev == NULL) { retval = -ENODEV; - err("No device or device unplugged %d", retval); + printk(KERN_ERR "legousbtower: No device or device unplugged %d\n", retval); goto unlock_exit; } @@ -697,7 +699,7 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t /* verify that the device wasn't unplugged */ if (dev->udev == NULL) { retval = -ENODEV; - err("No device or device unplugged %d", retval); + printk(KERN_ERR "legousbtower: No device or device unplugged %d\n", retval); goto unlock_exit; } @@ -744,7 +746,8 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t retval = usb_submit_urb (dev->interrupt_out_urb, GFP_KERNEL); if (retval) { dev->interrupt_out_busy = 0; - err("Couldn't submit interrupt_out_urb %d", retval); + dev_err(&dev->udev->dev, + "Couldn't submit interrupt_out_urb %d\n", retval); goto unlock_exit; } retval = bytes_to_write; @@ -803,9 +806,10 @@ resubmit: /* resubmit if we're still running */ if (dev->interrupt_in_running && dev->udev) { retval = usb_submit_urb (dev->interrupt_in_urb, GFP_ATOMIC); - if (retval) { - err("%s: usb_submit_urb failed (%d)", __func__, retval); - } + if (retval) + dev_err(&dev->udev->dev, + "%s: usb_submit_urb failed (%d)\n", + __func__, retval); } exit: @@ -852,6 +856,7 @@ static void tower_interrupt_out_callback (struct urb *urb) */ static int tower_probe (struct usb_interface *interface, const struct usb_device_id *id) { + struct device *idev = &interface->dev; struct usb_device *udev = interface_to_usbdev(interface); struct lego_usb_tower *dev = NULL; struct usb_host_interface *iface_desc; @@ -871,7 +876,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL); if (dev == NULL) { - err ("Out of memory"); + dev_err(idev, "Out of memory\n"); goto exit; } @@ -915,37 +920,37 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device } } if(dev->interrupt_in_endpoint == NULL) { - err("interrupt in endpoint not found"); + dev_err(idev, "interrupt in endpoint not found\n"); goto error; } if (dev->interrupt_out_endpoint == NULL) { - err("interrupt out endpoint not found"); + dev_err(idev, "interrupt out endpoint not found\n"); goto error; } dev->read_buffer = kmalloc (read_buffer_size, GFP_KERNEL); if (!dev->read_buffer) { - err("Couldn't allocate read_buffer"); + dev_err(idev, "Couldn't allocate read_buffer\n"); goto error; } dev->interrupt_in_buffer = kmalloc (usb_endpoint_maxp(dev->interrupt_in_endpoint), GFP_KERNEL); if (!dev->interrupt_in_buffer) { - err("Couldn't allocate interrupt_in_buffer"); + dev_err(idev, "Couldn't allocate interrupt_in_buffer\n"); goto error; } dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->interrupt_in_urb) { - err("Couldn't allocate interrupt_in_urb"); + dev_err(idev, "Couldn't allocate interrupt_in_urb\n"); goto error; } dev->interrupt_out_buffer = kmalloc (write_buffer_size, GFP_KERNEL); if (!dev->interrupt_out_buffer) { - err("Couldn't allocate interrupt_out_buffer"); + dev_err(idev, "Couldn't allocate interrupt_out_buffer\n"); goto error; } dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->interrupt_out_urb) { - err("Couldn't allocate interrupt_out_urb"); + dev_err(idev, "Couldn't allocate interrupt_out_urb\n"); goto error; } dev->interrupt_in_interval = interrupt_in_interval ? interrupt_in_interval : dev->interrupt_in_endpoint->bInterval; @@ -958,7 +963,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device if (retval) { /* something prevented us from registering this driver */ - err ("Not able to get a minor for this device."); + dev_err(idev, "Not able to get a minor for this device.\n"); usb_set_intfdata (interface, NULL); goto error; } @@ -980,7 +985,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device sizeof(get_version_reply), 1000); if (result < 0) { - err("LEGO USB Tower get version control request failed"); + dev_err(idev, "LEGO USB Tower get version control request failed\n"); retval = result; goto error; } -- cgit v0.10.2 From c41fba132e913c4696b6a87cc3c97ac0a95ce31a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:48 -0700 Subject: USB: rio500.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Cesar Miquel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 487a8ce..cb55dc5 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -171,7 +171,9 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) if (result == -ETIMEDOUT) retries--; else if (result < 0) { - err("Error executing ioctrl. code = %d", result); + dev_err(&rio->rio_dev->dev, + "Error executing ioctrl. code = %d\n", + result); retries = 0; } else { dbg("Executed ioctl. Result = %d (data=%02x)", @@ -238,7 +240,9 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) if (result == -ETIMEDOUT) retries--; else if (result < 0) { - err("Error executing ioctrl. code = %d", result); + dev_err(&rio->rio_dev->dev, + "Error executing ioctrl. code = %d\n", + result); retries = 0; } else { dbg("Executed ioctl. Result = %d", result); @@ -332,7 +336,8 @@ write_rio(struct file *file, const char __user *buffer, break; }; if (result) { - err("Write Whoops - %x", result); + dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n", + result); errn = -EIO; goto error; } @@ -401,7 +406,8 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) } else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */ if (!maxretry--) { mutex_unlock(&(rio->lock)); - err("read_rio: maxretry timeout"); + dev_err(&rio->rio_dev->dev, + "read_rio: maxretry timeout\n"); return -ETIME; } prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE); @@ -410,8 +416,9 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) continue; } else if (result != -EREMOTEIO) { mutex_unlock(&(rio->lock)); - err("Read Whoops - result:%u partial:%u this_read:%u", - result, partial, this_read); + dev_err(&rio->rio_dev->dev, + "Read Whoops - result:%u partial:%u this_read:%u\n", + result, partial, this_read); return -EIO; } else { mutex_unlock(&(rio->lock)); @@ -459,21 +466,24 @@ static int probe_rio(struct usb_interface *intf, retval = usb_register_dev(intf, &usb_rio_class); if (retval) { - err("Not able to get a minor for this device."); + dev_err(&dev->dev, + "Not able to get a minor for this device.\n"); return -ENOMEM; } rio->rio_dev = dev; if (!(rio->obuf = kmalloc(OBUF_SIZE, GFP_KERNEL))) { - err("probe_rio: Not enough memory for the output buffer"); + dev_err(&dev->dev, + "probe_rio: Not enough memory for the output buffer\n"); usb_deregister_dev(intf, &usb_rio_class); return -ENOMEM; } dbg("probe_rio: obuf address:%p", rio->obuf); if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) { - err("probe_rio: Not enough memory for the input buffer"); + dev_err(&dev->dev, + "probe_rio: Not enough memory for the input buffer\n"); usb_deregister_dev(intf, &usb_rio_class); kfree(rio->obuf); return -ENOMEM; -- cgit v0.10.2 From abd83e4bc8bd819117bc27ba75cb8e0d337ebadb Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:51 -0700 Subject: USB: usblcd.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Zack Parsons CC: Kuninori Morimoto CC: Sarah Sharp CC: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index e2b4bd3..c4ef9a1 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -87,8 +87,8 @@ static int lcd_open(struct inode *inode, struct file *file) interface = usb_find_interface(&lcd_driver, subminor); if (!interface) { mutex_unlock(&lcd_mutex); - err("USBLCD: %s - error, can't find device for minor %d", - __func__, subminor); + printk(KERN_ERR "USBLCD: %s - error, can't find device for minor %d\n", + __func__, subminor); return -ENODEV; } @@ -268,8 +268,9 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, /* send the data out the bulk port */ retval = usb_submit_urb(urb, GFP_KERNEL); if (retval) { - err("USBLCD: %s - failed submitting write urb, error %d", - __func__, retval); + dev_err(&dev->udev->dev, + "%s - failed submitting write urb, error %d\n", + __func__, retval); goto error_unanchor; } @@ -322,7 +323,7 @@ static int lcd_probe(struct usb_interface *interface, /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { - err("Out of memory"); + dev_err(&interface->dev, "Out of memory\n"); goto error; } kref_init(&dev->kref); @@ -352,7 +353,8 @@ static int lcd_probe(struct usb_interface *interface, dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!dev->bulk_in_buffer) { - err("Could not allocate bulk_in_buffer"); + dev_err(&interface->dev, + "Could not allocate bulk_in_buffer\n"); goto error; } } @@ -364,7 +366,8 @@ static int lcd_probe(struct usb_interface *interface, } } if (!(dev->bulk_in_endpointAddr && dev->bulk_out_endpointAddr)) { - err("Could not find both bulk-in and bulk-out endpoints"); + dev_err(&interface->dev, + "Could not find both bulk-in and bulk-out endpoints\n"); goto error; } @@ -375,7 +378,8 @@ static int lcd_probe(struct usb_interface *interface, retval = usb_register_dev(interface, &lcd_class); if (retval) { /* something prevented us from registering this driver */ - err("Not able to get a minor for this device."); + dev_err(&interface->dev, + "Not able to get a minor for this device.\n"); usb_set_intfdata(interface, NULL); goto error; } -- cgit v0.10.2 From d2b1ff7104d86e1e3cc0ab02f6aa0d96aeb2cf86 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:53 -0700 Subject: USB: uss720.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 8b1d94a..7f64147 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -118,7 +118,8 @@ static void async_complete(struct urb *urb) priv = rq->priv; pp = priv->pp; if (status) { - err("async_complete: urb error %d", status); + dev_err(&urb->dev->dev, "async_complete: urb error %d\n", + status); } else if (rq->dr.bRequest == 3) { memcpy(priv->reg, rq->reg, sizeof(priv->reg)); #if 0 @@ -151,7 +152,7 @@ static struct uss720_async_request *submit_async_request(struct parport_uss720_p return NULL; rq = kmalloc(sizeof(struct uss720_async_request), mem_flags); if (!rq) { - err("submit_async_request out of memory"); + dev_err(&usbdev->dev, "submit_async_request out of memory\n"); return NULL; } kref_init(&rq->ref_count); @@ -162,7 +163,7 @@ static struct uss720_async_request *submit_async_request(struct parport_uss720_p rq->urb = usb_alloc_urb(0, mem_flags); if (!rq->urb) { kref_put(&rq->ref_count, destroy_async); - err("submit_async_request out of memory"); + dev_err(&usbdev->dev, "submit_async_request out of memory\n"); return NULL; } rq->dr.bRequestType = requesttype; @@ -182,7 +183,7 @@ static struct uss720_async_request *submit_async_request(struct parport_uss720_p if (!ret) return rq; destroy_async(&rq->ref_count); - err("submit_async_request submit_urb failed with %d", ret); + dev_err(&usbdev->dev, "submit_async_request submit_urb failed with %d\n", ret); return NULL; } @@ -217,7 +218,8 @@ static int get_1284_register(struct parport *pp, unsigned char reg, unsigned cha priv = pp->private_data; rq = submit_async_request(priv, 3, 0xc0, ((unsigned int)reg) << 8, 0, mem_flags); if (!rq) { - err("get_1284_register(%u) failed", (unsigned int)reg); + dev_err(&priv->usbdev->dev, "get_1284_register(%u) failed", + (unsigned int)reg); return -EIO; } if (!val) { @@ -248,7 +250,8 @@ static int set_1284_register(struct parport *pp, unsigned char reg, unsigned cha priv = pp->private_data; rq = submit_async_request(priv, 4, 0x40, (((unsigned int)reg) << 8) | val, 0, mem_flags); if (!rq) { - err("set_1284_register(%u,%u) failed", (unsigned int)reg, (unsigned int)val); + dev_err(&priv->usbdev->dev, "set_1284_register(%u,%u) failed", + (unsigned int)reg, (unsigned int)val); return -EIO; } kref_put(&rq->ref_count, destroy_async); -- cgit v0.10.2 From 45714104b9e85ffa199c5622e227657e99d92fb5 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:56 -0700 Subject: USB: yurex.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 897edda..e0388dc 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -83,7 +83,8 @@ static void yurex_control_callback(struct urb *urb) int status = urb->status; if (status) { - err("%s - control failed: %d\n", __func__, status); + dev_err(&urb->dev->dev, "%s - control failed: %d\n", + __func__, status); wake_up_interruptible(&dev->waitq); return; } @@ -139,8 +140,9 @@ static void yurex_interrupt(struct urb *urb) case 0: /*success*/ break; case -EOVERFLOW: - err("%s - overflow with length %d, actual length is %d", - __func__, YUREX_BUF_SIZE, dev->urb->actual_length); + dev_err(&dev->interface->dev, + "%s - overflow with length %d, actual length is %d\n", + __func__, YUREX_BUF_SIZE, dev->urb->actual_length); case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: @@ -148,7 +150,8 @@ static void yurex_interrupt(struct urb *urb) /* The device is terminated, clean up */ return; default: - err("%s - unknown status received: %d", __func__, status); + dev_err(&dev->interface->dev, + "%s - unknown status received: %d\n", __func__, status); goto exit; } @@ -181,7 +184,7 @@ static void yurex_interrupt(struct urb *urb) exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) { - err("%s - usb_submit_urb failed: %d", + dev_err(&dev->interface->dev, "%s - usb_submit_urb failed: %d\n", __func__, retval); } } @@ -198,7 +201,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) { - err("Out of memory"); + dev_err(&interface->dev, "Out of memory\n"); goto error; } kref_init(&dev->kref); @@ -221,7 +224,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ } if (!dev->int_in_endpointAddr) { retval = -ENODEV; - err("Could not find endpoints"); + dev_err(&interface->dev, "Could not find endpoints\n"); goto error; } @@ -229,7 +232,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ /* allocate control URB */ dev->cntl_urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->cntl_urb) { - err("Could not allocate control URB"); + dev_err(&interface->dev, "Could not allocate control URB\n"); goto error; } @@ -238,7 +241,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ GFP_KERNEL, &dev->cntl_urb->setup_dma); if (!dev->cntl_req) { - err("Could not allocate cntl_req"); + dev_err(&interface->dev, "Could not allocate cntl_req\n"); goto error; } @@ -247,7 +250,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ GFP_KERNEL, &dev->cntl_urb->transfer_dma); if (!dev->cntl_buffer) { - err("Could not allocate cntl_buffer"); + dev_err(&interface->dev, "Could not allocate cntl_buffer\n"); goto error; } @@ -269,7 +272,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ /* allocate interrupt URB */ dev->urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->urb) { - err("Could not allocate URB"); + dev_err(&interface->dev, "Could not allocate URB\n"); goto error; } @@ -277,7 +280,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ dev->int_buffer = usb_alloc_coherent(dev->udev, YUREX_BUF_SIZE, GFP_KERNEL, &dev->urb->transfer_dma); if (!dev->int_buffer) { - err("Could not allocate int_buffer"); + dev_err(&interface->dev, "Could not allocate int_buffer\n"); goto error; } @@ -289,7 +292,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ dev->cntl_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; if (usb_submit_urb(dev->urb, GFP_KERNEL)) { retval = -EIO; - err("Could not submitting URB"); + dev_err(&interface->dev, "Could not submitting URB\n"); goto error; } @@ -299,7 +302,8 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ /* we can register the device now, as it is ready */ retval = usb_register_dev(interface, &yurex_class); if (retval) { - err("Not able to get a minor for this device."); + dev_err(&interface->dev, + "Not able to get a minor for this device.\n"); usb_set_intfdata(interface, NULL); goto error; } @@ -372,8 +376,8 @@ static int yurex_open(struct inode *inode, struct file *file) interface = usb_find_interface(&yurex_driver, subminor); if (!interface) { - err("%s - error, can't find device for minor %d", - __func__, subminor); + printk(KERN_ERR "%s - error, can't find device for minor %d", + __func__, subminor); retval = -ENODEV; goto exit; } @@ -518,7 +522,9 @@ static ssize_t yurex_write(struct file *file, const char *user_buffer, size_t co mutex_unlock(&dev->io_mutex); if (retval < 0) { - err("%s - failed to send bulk msg, error %d", __func__, retval); + dev_err(&dev->interface->dev, + "%s - failed to send bulk msg, error %d\n", + __func__, retval); goto error; } if (set && timeout) -- cgit v0.10.2 From 085fb962623b7278fd2f33a8604c37dd22d06b70 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:58 -0700 Subject: USB: console.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 1ee6b2a..b9cca6d 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -113,7 +113,8 @@ static int usb_console_setup(struct console *co, char *options) serial = usb_serial_get_by_index(co->index); if (serial == NULL) { /* no device is connected yet, sorry :( */ - err("No USB device connected to ttyUSB%i", co->index); + printk(KERN_ERR "No USB device connected to ttyUSB%i\n", + co->index); return -ENODEV; } @@ -137,7 +138,7 @@ static int usb_console_setup(struct console *co, char *options) tty = kzalloc(sizeof(*tty), GFP_KERNEL); if (!tty) { retval = -ENOMEM; - err("no more memory"); + dev_err(&port->dev, "no more memory\n"); goto reset_open_count; } kref_init(&tty->kref); @@ -146,7 +147,7 @@ static int usb_console_setup(struct console *co, char *options) tty->index = co->index; if (tty_init_termios(tty)) { retval = -ENOMEM; - err("no more memory"); + dev_err(&port->dev, "no more memory\n"); goto free_tty; } } @@ -159,7 +160,7 @@ static int usb_console_setup(struct console *co, char *options) retval = usb_serial_generic_open(NULL, port); if (retval) { - err("could not open USB console port"); + dev_err(&port->dev, "could not open USB console port\n"); goto fail; } -- cgit v0.10.2 From 461863df3c8d4402495684eff9c11cc7e3f8aaea Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:53:59 -0700 Subject: USB: option.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Matthias Urlichs Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 836cfa9..9b3c4a4 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1412,7 +1412,7 @@ static void option_instat_callback(struct urb *urb) req_pkt->bRequestType, req_pkt->bRequest); } } else - err("%s: error %d", __func__, status); + dev_err(&port->dev, "%s: error %d\n", __func__, status); /* Resubmit urb so we continue receiving IRQ data */ if (status != -ESHUTDOWN && status != -ENOENT) { -- cgit v0.10.2 From 3a1c2a82204f5376f484d82cb18189afc2145c77 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Apr 2012 16:54:01 -0700 Subject: USB: usb_wwan.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Rusty Russell CC: Alan Stern CC: Mauro Carvalho Chehab CC: "Rafael J. Wysocki" Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index c88657d..194c546 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -725,8 +725,8 @@ int usb_wwan_resume(struct usb_serial *serial) err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); dbg("Submitted interrupt URB for port %d (result %d)", i, err); if (err < 0) { - err("%s: Error %d for interrupt URB of port%d", - __func__, err, i); + dev_err(&port->dev, "%s: Error %d for interrupt URB\n", + __func__, err); goto err_out; } } @@ -747,8 +747,8 @@ int usb_wwan_resume(struct usb_serial *serial) urb = portdata->in_urbs[j]; err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { - err("%s: Error %d for bulk URB %d", - __func__, err, i); + dev_err(&port->dev, "%s: Error %d for bulk URB %d\n", + __func__, err, i); spin_unlock_irq(&intfdata->susp_lock); goto err_out; } -- cgit v0.10.2 From 3d9545cc375d117554a9b35dfddadf9189c62775 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 23 Apr 2012 13:54:36 -0400 Subject: EHCI: maintain the ehci->command value properly The ehci-hcd driver is a little haphazard about keeping track of the state of the USBCMD register. The ehci->command field is supposed to hold the register's value (apart from a few special bits) at all times, but it isn't maintained properly. This patch (as1543) cleans up the situation. It keeps ehci->command up-to-date, and uses that value rather than reading the register from the hardware whenever possible. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 680e1a3..7561966 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -1025,10 +1025,8 @@ static ssize_t debug_lpm_write(struct file *file, const char __user *user_buf, if (strict_strtoul(buf + 5, 16, &hird)) return -EINVAL; printk(KERN_INFO "setting hird %s %lu\n", buf + 6, hird); - temp = ehci_readl(ehci, &ehci->regs->command); - temp &= ~CMD_HIRD; - temp |= hird << 24; - ehci_writel(ehci, temp, &ehci->regs->command); + ehci->command = (ehci->command & ~CMD_HIRD) | (hird << 24); + ehci_writel(ehci, ehci->command, &ehci->regs->command); } else if (strncmp(buf, "disable", 7) == 0) { if (strict_strtoul(buf + 8, 10, &port)) return -EINVAL; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index a87c057..de1e689 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -226,8 +226,13 @@ static int ehci_halt (struct ehci_hcd *ehci) if ((temp & STS_HALT) != 0) return 0; + /* + * This routine gets called during probe before ehci->command + * has been initialized, so we can't rely on its value. + */ + ehci->command &= ~CMD_RUN; temp = ehci_readl(ehci, &ehci->regs->command); - temp &= ~CMD_RUN; + temp &= ~(CMD_RUN | CMD_IAAD); ehci_writel(ehci, temp, &ehci->regs->command); return handshake (ehci, &ehci->regs->status, STS_HALT, STS_HALT, 16 * 125); @@ -347,6 +352,7 @@ static int ehci_reset (struct ehci_hcd *ehci) if (ehci->debug) dbgp_external_startup(); + ehci->command = ehci_readl(ehci, &ehci->regs->command); ehci->port_c_suspend = ehci->suspended_ports = ehci->resuming_ports = 0; return retval; @@ -363,16 +369,14 @@ static void ehci_quiesce (struct ehci_hcd *ehci) #endif /* wait for any schedule enables/disables to take effect */ - temp = ehci_readl(ehci, &ehci->regs->command) << 10; - temp &= STS_ASS | STS_PSS; + temp = (ehci->command << 10) & (STS_ASS | STS_PSS); if (handshake_on_error_set_halt(ehci, &ehci->regs->status, STS_ASS | STS_PSS, temp, 16 * 125)) return; /* then disable anything that's still active */ - temp = ehci_readl(ehci, &ehci->regs->command); - temp &= ~(CMD_ASE | CMD_IAAD | CMD_PSE); - ehci_writel(ehci, temp, &ehci->regs->command); + ehci->command &= ~(CMD_ASE | CMD_PSE); + ehci_writel(ehci, ehci->command, &ehci->regs->command); /* hardware can take 16 microframes to turn off ... */ handshake_on_error_set_halt(ehci, &ehci->regs->status, diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 402e766..fc9e7cc 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -233,7 +233,6 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) /* stop schedules, clean any completed work */ if (ehci->rh_state == EHCI_RH_RUNNING) ehci_quiesce (ehci); - ehci->command = ehci_readl(ehci, &ehci->regs->command); ehci_work(ehci); /* Unlike other USB host controller types, EHCI doesn't have @@ -374,6 +373,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next); /* restore CMD_RUN, framelist size, and irq threshold */ + ehci->command |= CMD_RUN; ehci_writel(ehci, ehci->command, &ehci->regs->command); ehci->rh_state = EHCI_RH_RUNNING; diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 36ca507..13f4f98 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -981,14 +981,12 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh) head = ehci->async; timer_action_done (ehci, TIMER_ASYNC_OFF); if (!head->qh_next.qh) { - u32 cmd = ehci_readl(ehci, &ehci->regs->command); - - if (!(cmd & CMD_ASE)) { + if (!(ehci->command & CMD_ASE)) { /* in case a clear of CMD_ASE didn't take yet */ (void)handshake(ehci, &ehci->regs->status, STS_ASS, 0, 150); - cmd |= CMD_ASE; - ehci_writel(ehci, cmd, &ehci->regs->command); + ehci->command |= CMD_ASE; + ehci_writel(ehci, ehci->command, &ehci->regs->command); /* posted write need not be known to HC yet ... */ } } @@ -1204,7 +1202,6 @@ static void end_unlink_async (struct ehci_hcd *ehci) static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) { - int cmd = ehci_readl(ehci, &ehci->regs->command); struct ehci_qh *prev; #ifdef DEBUG @@ -1222,8 +1219,8 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) if (ehci->rh_state != EHCI_RH_HALTED && !ehci->reclaim) { /* ... and CMD_IAAD clear */ - ehci_writel(ehci, cmd & ~CMD_ASE, - &ehci->regs->command); + ehci->command &= ~CMD_ASE; + ehci_writel(ehci, ehci->command, &ehci->regs->command); wmb (); // handshake later, if we need to timer_action_done (ehci, TIMER_ASYNC_OFF); @@ -1253,8 +1250,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) return; } - cmd |= CMD_IAAD; - ehci_writel(ehci, cmd, &ehci->regs->command); + ehci_writel(ehci, ehci->command | CMD_IAAD, &ehci->regs->command); (void)ehci_readl(ehci, &ehci->regs->command); iaa_watchdog_start(ehci); } diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index a60679c..ffe8fc3 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -481,7 +481,6 @@ static int tt_no_collision ( static int enable_periodic (struct ehci_hcd *ehci) { - u32 cmd; int status; if (ehci->periodic_sched++) @@ -497,8 +496,8 @@ static int enable_periodic (struct ehci_hcd *ehci) return status; } - cmd = ehci_readl(ehci, &ehci->regs->command) | CMD_PSE; - ehci_writel(ehci, cmd, &ehci->regs->command); + ehci->command |= CMD_PSE; + ehci_writel(ehci, ehci->command, &ehci->regs->command); /* posted write ... PSS happens later */ /* make sure ehci_work scans these */ @@ -511,7 +510,6 @@ static int enable_periodic (struct ehci_hcd *ehci) static int disable_periodic (struct ehci_hcd *ehci) { - u32 cmd; int status; if (--ehci->periodic_sched) @@ -537,8 +535,8 @@ static int disable_periodic (struct ehci_hcd *ehci) return status; } - cmd = ehci_readl(ehci, &ehci->regs->command) & ~CMD_PSE; - ehci_writel(ehci, cmd, &ehci->regs->command); + ehci->command &= ~CMD_PSE; + ehci_writel(ehci, ehci->command, &ehci->regs->command); /* posted write ... */ free_cached_lists(ehci); -- cgit v0.10.2 From 6ba0d809955b4e5c127093903661d0bde2e99d8e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 23 Apr 2012 21:55:31 +0200 Subject: usb/bcma: Add missing #include MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit m68k/allmodconfig: drivers/usb/host/bcma-hcd.c: In function ‘bcma_hcd_probe’: drivers/usb/host/bcma-hcd.c:234: error: implicit declaration of function ‘kzalloc’ drivers/usb/host/bcma-hcd.c:234: warning: assignment makes pointer from integer without a cast drivers/usb/host/bcma-hcd.c:264: error: implicit declaration of function ‘kfree’ Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c index 0b35d42..443da21 100644 --- a/drivers/usb/host/bcma-hcd.c +++ b/drivers/usb/host/bcma-hcd.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From 4627b1ea038f2d19087c5f426df66f9cbe052f8c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 23 Apr 2012 21:55:32 +0200 Subject: usb/ssb: Add missing #include MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit m68k/allmodconfig: drivers/usb/host/ssb-hcd.c: In function ‘ssb_hcd_probe’: drivers/usb/host/ssb-hcd.c:170: error: implicit declaration of function ‘kzalloc’ drivers/usb/host/ssb-hcd.c:170: warning: assignment makes pointer from integer without a cast drivers/usb/host/ssb-hcd.c:205: error: implicit declaration of function ‘kfree’ Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ssb-hcd.c b/drivers/usb/host/ssb-hcd.c index c2e7343..c2a29fa 100644 --- a/drivers/usb/host/ssb-hcd.c +++ b/drivers/usb/host/ssb-hcd.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From ec42899c2f9cf35e25e93c61ab9948e488de1825 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 20 Apr 2012 09:33:31 +0300 Subject: USB: wwan: remove an unneeded check We already verified that "status" was zero on this else branch. Since zero is not equal to -ESHUTDOWN, this condition is always true. I removed it and pull everything in an indent level. This doesn't change how the code works, it's just a cleanup. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 194c546..31ba989 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -307,20 +307,17 @@ static void usb_wwan_indat_callback(struct urb *urb) } /* Resubmit urb so we continue receiving */ - if (status != -ESHUTDOWN) { - err = usb_submit_urb(urb, GFP_ATOMIC); - if (err) { - if (err != -EPERM) { - printk(KERN_ERR "%s: resubmit read urb failed. " - "(%d)", __func__, err); - /* busy also in error unless we are killed */ - usb_mark_last_busy(port->serial->dev); - } - } else { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) { + if (err != -EPERM) { + printk(KERN_ERR "%s: resubmit read urb failed. " + "(%d)", __func__, err); + /* busy also in error unless we are killed */ usb_mark_last_busy(port->serial->dev); } + } else { + usb_mark_last_busy(port->serial->dev); } - } } -- cgit v0.10.2 From ab5e59dbdb6d2e2d784381bd194e0229b8b990b5 Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Tue, 24 Apr 2012 14:18:38 +0300 Subject: usb: dwc3: omap: add dwc3_omap_readl/writel functions We separate between dwc3-omap helper functions to dwc3-core helper functions. This will allow us to change the helper functions implementation according to each module need. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index d7d9c0e..479dc04 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -49,7 +49,6 @@ #include #include "core.h" -#include "io.h" /* * All these registers belong to OMAP's Wrapper around the @@ -143,6 +142,17 @@ struct dwc3_omap { u32 dma_status:1; }; +static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset) +{ + return readl(base + offset); +} + +static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value) +{ + writel(value, base + offset); +} + + static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) { struct dwc3_omap *omap = _omap; @@ -150,7 +160,7 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) spin_lock(&omap->lock); - reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_1); + reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_1); if (reg & USBOTGSS_IRQ1_DMADISABLECLR) { dev_dbg(omap->dev, "DMA Disable was Cleared\n"); @@ -184,10 +194,10 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL) dev_dbg(omap->dev, "IDPULLUP Fall\n"); - dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg); + dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg); - reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_0); - dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg); + reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0); + dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg); spin_unlock(&omap->lock); @@ -270,7 +280,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) omap->base = base; omap->dwc3 = dwc3; - reg = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); + reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); utmi_mode = of_get_property(node, "utmi-mode", &size); if (utmi_mode && size == sizeof(*utmi_mode)) { @@ -293,10 +303,10 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) } } - dwc3_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg); + dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg); /* check the DMA Status */ - reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG); + reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE); /* Set No-Idle and No-Standby */ @@ -306,7 +316,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) reg |= (USBOTGSS_SYSCONFIG_STANDBYMODE(USBOTGSS_STANDBYMODE_NO_STANDBY) | USBOTGSS_SYSCONFIG_IDLEMODE(USBOTGSS_IDLEMODE_NO_IDLE)); - dwc3_writel(omap->base, USBOTGSS_SYSCONFIG, reg); + dwc3_omap_writel(omap->base, USBOTGSS_SYSCONFIG, reg); ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0, "dwc3-omap", omap); @@ -318,7 +328,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) /* enable all IRQs */ reg = USBOTGSS_IRQO_COREIRQ_ST; - dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg); + dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg); reg = (USBOTGSS_IRQ1_OEVT | USBOTGSS_IRQ1_DRVVBUS_RISE | @@ -330,7 +340,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) USBOTGSS_IRQ1_DISCHRGVBUS_FALL | USBOTGSS_IRQ1_IDPULLUP_FALL); - dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg); + dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg); ret = platform_device_add_resources(dwc3, pdev->resource, pdev->num_resources); -- cgit v0.10.2 From 51249dca627d9d0e6b41531e716cbc308554a62c Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Tue, 24 Apr 2012 14:18:39 +0300 Subject: usb: dwc3: core: split host address space This fix prevents a problem with dwc3 and host mode where we were requesting the entire memory region in dwc3/core.c, thus preventing xhci-plat from ever ioremapping its own address space. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 7bd815a..b2b4172 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -410,7 +410,6 @@ static int __devinit dwc3_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; int ret = -ENOMEM; - int irq; void __iomem *regs; void *mem; @@ -425,15 +424,28 @@ static int __devinit dwc3_probe(struct platform_device *pdev) dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); dwc->mem = mem; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res) { - dev_err(dev, "missing resource\n"); + dev_err(dev, "missing IRQ\n"); return -ENODEV; } + dwc->xhci_resources[1] = *res; - dwc->res = res; - - res = devm_request_mem_region(dev, res->start, resource_size(res), + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "missing memory resource\n"); + return -ENODEV; + } + dwc->xhci_resources[0] = *res; + dwc->xhci_resources[0].end = dwc->xhci_resources[0].start + + DWC3_XHCI_REGS_END; + + /* + * Request memory region but exclude xHCI regs, + * since it will be requested by the xhci-plat driver. + */ + res = devm_request_mem_region(dev, res->start + DWC3_GLOBALS_REGS_START, + resource_size(res) - DWC3_GLOBALS_REGS_START, dev_name(dev)); if (!res) { dev_err(dev, "can't request mem region\n"); @@ -446,19 +458,12 @@ static int __devinit dwc3_probe(struct platform_device *pdev) return -ENOMEM; } - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(dev, "missing IRQ\n"); - return -ENODEV; - } - spin_lock_init(&dwc->lock); platform_set_drvdata(pdev, dwc); dwc->regs = regs; dwc->regs_size = resource_size(res); dwc->dev = dev; - dwc->irq = irq; if (!strncmp("super", maximum_speed, 5)) dwc->maximum_speed = DWC3_DCFG_SUPERSPEED; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index a32c2b5..c7b3ca0 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -52,6 +52,7 @@ /* Global constants */ #define DWC3_ENDPOINTS_NUM 32 +#define DWC3_XHCI_RESOURCES_NUM 2 #define DWC3_EVENT_BUFFERS_SIZE PAGE_SIZE #define DWC3_EVENT_TYPE_MASK 0xfe @@ -75,6 +76,16 @@ #define DWC3_GSNPSID_MASK 0xffff0000 #define DWC3_GSNPSREV_MASK 0xffff +/* DWC3 registers memory space boundries */ +#define DWC3_XHCI_REGS_START 0x0 +#define DWC3_XHCI_REGS_END 0x7fff +#define DWC3_GLOBALS_REGS_START 0xc100 +#define DWC3_GLOBALS_REGS_END 0xc6ff +#define DWC3_DEVICE_REGS_START 0xc700 +#define DWC3_DEVICE_REGS_END 0xcbff +#define DWC3_OTG_REGS_START 0xcc00 +#define DWC3_OTG_REGS_END 0xccff + /* Global Registers */ #define DWC3_GSBUSCFG0 0xc100 #define DWC3_GSBUSCFG1 0xc104 @@ -583,7 +594,7 @@ struct dwc3 { struct device *dev; struct platform_device *xhci; - struct resource *res; + struct resource xhci_resources[DWC3_XHCI_RESOURCES_NUM]; struct dwc3_event_buffer **ev_buffs; struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM]; @@ -594,8 +605,6 @@ struct dwc3 { void __iomem *regs; size_t regs_size; - int irq; - u32 num_event_buffers; u32 u1u2; u32 maximum_speed; diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index b108d18..56a6234 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -39,15 +39,6 @@ #include "core.h" -static struct resource generic_resources[] = { - { - .flags = IORESOURCE_IRQ, - }, - { - .flags = IORESOURCE_MEM, - }, -}; - int dwc3_host_init(struct dwc3 *dwc) { struct platform_device *xhci; @@ -68,14 +59,8 @@ int dwc3_host_init(struct dwc3 *dwc) dwc->xhci = xhci; - /* setup resources */ - generic_resources[0].start = dwc->irq; - - generic_resources[1].start = dwc->res->start; - generic_resources[1].end = dwc->res->start + 0x7fff; - - ret = platform_device_add_resources(xhci, generic_resources, - ARRAY_SIZE(generic_resources)); + ret = platform_device_add_resources(xhci, dwc->xhci_resources, + DWC3_XHCI_RESOURCES_NUM); if (ret) { dev_err(dwc->dev, "couldn't add resources to xHCI device\n"); goto err1; diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h index 071d561..a50f76b 100644 --- a/drivers/usb/dwc3/io.h +++ b/drivers/usb/dwc3/io.h @@ -41,14 +41,26 @@ #include +#include "core.h" + static inline u32 dwc3_readl(void __iomem *base, u32 offset) { - return readl(base + offset); + /* + * We requested the mem region starting from the Globals address + * space, see dwc3_probe in core.c. + * However, the offsets are given starting from xHCI address space. + */ + return readl(base + (offset - DWC3_GLOBALS_REGS_START)); } static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value) { - writel(value, base + offset); + /* + * We requested the mem region starting from the Globals address + * space, see dwc3_probe in core.c. + * However, the offsets are given starting from xHCI address space. + */ + writel(value, base + (offset - DWC3_GLOBALS_REGS_START)); } #endif /* __DRIVERS_USB_DWC3_IO_H */ -- cgit v0.10.2 From 5df77312047739b07d735a6b45ae13244d8f2b60 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 23 Apr 2012 17:13:54 -0700 Subject: USB: Staging: media: easycap: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. Cc: Mauro Carvalho Chehab Cc: Tomas Winkler Cc: Jesper Juhl Cc: Ezequiel Garcia Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/media/easycap/easycap_main.c b/drivers/staging/media/easycap/easycap_main.c index d0fe34a..6f83d36 100644 --- a/drivers/staging/media/easycap/easycap_main.c +++ b/drivers/staging/media/easycap/easycap_main.c @@ -3578,7 +3578,8 @@ static int easycap_usb_probe(struct usb_interface *intf, if (0 != (video_register_device(&(peasycap->video_device), VFL_TYPE_GRABBER, -1))) { - err("Not able to register with videodev"); + dev_err(&intf->dev, + "Not able to register with videodev\n"); videodev_release(&(peasycap->video_device)); return -ENODEV; } @@ -3822,7 +3823,8 @@ static int easycap_usb_probe(struct usb_interface *intf, rc = easycap_alsa_probe(peasycap); if (rc) { - err("easycap_alsa_probe() rc = %i\n", rc); + dev_err(&intf->dev, "easycap_alsa_probe() rc = %i\n", + rc); return -ENODEV; } -- cgit v0.10.2 From 493f7d410ca1d3ff2e608f5eaf8099546c13920a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 23 Apr 2012 17:14:54 -0700 Subject: USB: Staging: media: lirc: lirc_imon: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. Cc: Jarod Wilson Cc: Mauro Carvalho Chehab Cc: Dan Carpenter Cc: Alexey Khoroshilov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/media/lirc/lirc_imon.c b/drivers/staging/media/lirc/lirc_imon.c index 5f7f8cd..d7cf5ef 100644 --- a/drivers/staging/media/lirc/lirc_imon.c +++ b/drivers/staging/media/lirc/lirc_imon.c @@ -209,8 +209,9 @@ static void deregister_from_lirc(struct imon_context *context) retval = lirc_unregister_driver(minor); if (retval) - err("%s: unable to deregister from lirc(%d)", - __func__, retval); + printk(KERN_ERR KBUILD_MODNAME + ": %s: unable to deregister from lirc(%d)", + __func__, retval); else printk(KERN_INFO MOD_NAME ": Deregistered iMON driver " "(minor:%d)\n", minor); @@ -234,16 +235,18 @@ static int display_open(struct inode *inode, struct file *file) subminor = iminor(inode); interface = usb_find_interface(&imon_driver, subminor); if (!interface) { - err("%s: could not find interface for minor %d", - __func__, subminor); + printk(KERN_ERR KBUILD_MODNAME + ": %s: could not find interface for minor %d\n", + __func__, subminor); retval = -ENODEV; goto exit; } context = usb_get_intfdata(interface); if (!context) { - err("%s: no context found for minor %d", - __func__, subminor); + dev_err(&interface->dev, + "%s: no context found for minor %d\n", + __func__, subminor); retval = -ENODEV; goto exit; } @@ -251,10 +254,12 @@ static int display_open(struct inode *inode, struct file *file) mutex_lock(&context->ctx_lock); if (!context->display) { - err("%s: display not supported by device", __func__); + dev_err(&interface->dev, + "%s: display not supported by device\n", __func__); retval = -ENODEV; } else if (context->display_isopen) { - err("%s: display port is already open", __func__); + dev_err(&interface->dev, + "%s: display port is already open\n", __func__); retval = -EBUSY; } else { context->display_isopen = 1; @@ -281,17 +286,20 @@ static int display_close(struct inode *inode, struct file *file) context = file->private_data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + "%s: no context for device\n", __func__); return -ENODEV; } mutex_lock(&context->ctx_lock); if (!context->display) { - err("%s: display not supported by device", __func__); + dev_err(&context->usbdev->dev, + "%s: display not supported by device\n", __func__); retval = -ENODEV; } else if (!context->display_isopen) { - err("%s: display is not open", __func__); + dev_err(&context->usbdev->dev, + "%s: display is not open\n", __func__); retval = -EIO; } else { context->display_isopen = 0; @@ -340,19 +348,23 @@ static int send_packet(struct imon_context *context) retval = usb_submit_urb(context->tx_urb, GFP_KERNEL); if (retval) { atomic_set(&(context->tx.busy), 0); - err("%s: error submitting urb(%d)", __func__, retval); + dev_err(&context->usbdev->dev, + "%s: error submitting urb(%d)\n", __func__, retval); } else { /* Wait for transmission to complete (or abort) */ mutex_unlock(&context->ctx_lock); retval = wait_for_completion_interruptible( &context->tx.finished); if (retval) - err("%s: task interrupted", __func__); + dev_err(&context->usbdev->dev, + "%s: task interrupted\n", __func__); mutex_lock(&context->ctx_lock); retval = context->tx.status; if (retval) - err("%s: packet tx failed (%d)", __func__, retval); + dev_err(&context->usbdev->dev, + "%s: packet tx failed (%d)\n", + __func__, retval); } return retval; @@ -383,20 +395,23 @@ static ssize_t vfd_write(struct file *file, const char __user *buf, context = file->private_data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + "%s: no context for device\n", __func__); return -ENODEV; } mutex_lock(&context->ctx_lock); if (!context->dev_present) { - err("%s: no iMON device present", __func__); + dev_err(&context->usbdev->dev, + "%s: no iMON device present\n", __func__); retval = -ENODEV; goto exit; } if (n_bytes <= 0 || n_bytes > IMON_DATA_BUF_SZ - 3) { - err("%s: invalid payload size", __func__); + dev_err(&context->usbdev->dev, + "%s: invalid payload size\n", __func__); retval = -EINVAL; goto exit; } @@ -425,8 +440,9 @@ static ssize_t vfd_write(struct file *file, const char __user *buf, retval = send_packet(context); if (retval) { - err("%s: send packet failed for packet #%d", - __func__, seq/2); + dev_err(&context->usbdev->dev, + "%s: send packet failed for packet #%d\n", + __func__, seq/2); goto exit; } else { seq += 2; @@ -441,7 +457,8 @@ static ssize_t vfd_write(struct file *file, const char __user *buf, context->usb_tx_buf[7] = (unsigned char) seq; retval = send_packet(context); if (retval) - err("%s: send packet failed for packet #%d", + dev_err(&context->usbdev->dev, + "%s: send packet failed for packet #%d\n", __func__, seq/2); } @@ -508,7 +525,8 @@ static void ir_close(void *data) context = (struct imon_context *)data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + "%s: no context for device\n", __func__); return; } @@ -732,7 +750,7 @@ static int imon_probe(struct usb_interface *interface, context = kzalloc(sizeof(struct imon_context), GFP_KERNEL); if (!context) { - err("%s: kzalloc failed for context", __func__); + dev_err(dev, "%s: kzalloc failed for context\n", __func__); alloc_status = 1; goto alloc_status_switch; } @@ -797,7 +815,7 @@ static int imon_probe(struct usb_interface *interface, /* Input endpoint is mandatory */ if (!ir_ep_found) { - err("%s: no valid input (IR) endpoint found.", __func__); + dev_err(dev, "%s: no valid input (IR) endpoint found.\n", __func__); retval = -ENODEV; alloc_status = 2; goto alloc_status_switch; @@ -814,30 +832,30 @@ static int imon_probe(struct usb_interface *interface, driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL); if (!driver) { - err("%s: kzalloc failed for lirc_driver", __func__); + dev_err(dev, "%s: kzalloc failed for lirc_driver\n", __func__); alloc_status = 2; goto alloc_status_switch; } rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL); if (!rbuf) { - err("%s: kmalloc failed for lirc_buffer", __func__); + dev_err(dev, "%s: kmalloc failed for lirc_buffer\n", __func__); alloc_status = 3; goto alloc_status_switch; } if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) { - err("%s: lirc_buffer_init failed", __func__); + dev_err(dev, "%s: lirc_buffer_init failed\n", __func__); alloc_status = 4; goto alloc_status_switch; } rx_urb = usb_alloc_urb(0, GFP_KERNEL); if (!rx_urb) { - err("%s: usb_alloc_urb failed for IR urb", __func__); + dev_err(dev, "%s: usb_alloc_urb failed for IR urb\n", __func__); alloc_status = 5; goto alloc_status_switch; } tx_urb = usb_alloc_urb(0, GFP_KERNEL); if (!tx_urb) { - err("%s: usb_alloc_urb failed for display urb", + dev_err(dev, "%s: usb_alloc_urb failed for display urb\n", __func__); alloc_status = 6; goto alloc_status_switch; @@ -865,7 +883,7 @@ static int imon_probe(struct usb_interface *interface, lirc_minor = lirc_register_driver(driver); if (lirc_minor < 0) { - err("%s: lirc_register_driver failed", __func__); + dev_err(dev, "%s: lirc_register_driver failed\n", __func__); alloc_status = 7; goto unlock; } else @@ -900,8 +918,8 @@ static int imon_probe(struct usb_interface *interface, retval = usb_submit_urb(context->rx_urb, GFP_KERNEL); if (retval) { - err("%s: usb_submit_urb failed for intf0 (%d)", - __func__, retval); + dev_err(dev, "%s: usb_submit_urb failed for intf0 (%d)\n", + __func__, retval); mutex_unlock(&context->ctx_lock); goto exit; } -- cgit v0.10.2 From 17122545d71e71ceb2da73ecdd05021f8e341c8b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 23 Apr 2012 17:27:48 -0700 Subject: USB: Staging: media: lirc: lirc_sasem: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead Cc: Jarod Wilson Cc: Mauro Carvalho Chehab Cc: Andrew Miller Cc: Alexey Khoroshilov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/media/lirc/lirc_sasem.c b/drivers/staging/media/lirc/lirc_sasem.c index 7442104..352a202 100644 --- a/drivers/staging/media/lirc/lirc_sasem.c +++ b/drivers/staging/media/lirc/lirc_sasem.c @@ -185,7 +185,7 @@ static void deregister_from_lirc(struct sasem_context *context) retval = lirc_unregister_driver(minor); if (retval) - err("%s: unable to deregister from lirc (%d)", + printk(KERN_ERR "%s: unable to deregister from lirc (%d)\n", __func__, retval); else printk(KERN_INFO "Deregistered Sasem driver (minor:%d)\n", @@ -210,16 +210,18 @@ static int vfd_open(struct inode *inode, struct file *file) subminor = iminor(inode); interface = usb_find_interface(&sasem_driver, subminor); if (!interface) { - err("%s: could not find interface for minor %d", - __func__, subminor); + printk(KERN_ERR KBUILD_MODNAME + ": %s: could not find interface for minor %d\n", + __func__, subminor); retval = -ENODEV; goto exit; } context = usb_get_intfdata(interface); if (!context) { - err("%s: no context found for minor %d", - __func__, subminor); + dev_err(&interface->dev, + "%s: no context found for minor %d\n", + __func__, subminor); retval = -ENODEV; goto exit; } @@ -227,12 +229,13 @@ static int vfd_open(struct inode *inode, struct file *file) mutex_lock(&context->ctx_lock); if (context->vfd_isopen) { - err("%s: VFD port is already open", __func__); + dev_err(&interface->dev, + "%s: VFD port is already open", __func__); retval = -EBUSY; } else { context->vfd_isopen = 1; file->private_data = context; - printk(KERN_INFO "VFD port opened\n"); + dev_info(&interface->dev, "VFD port opened\n"); } mutex_unlock(&context->ctx_lock); @@ -253,7 +256,8 @@ static long vfd_ioctl(struct file *file, unsigned cmd, unsigned long arg) context = (struct sasem_context *) file->private_data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + ": %s: no context for device\n", __func__); return -ENODEV; } @@ -287,14 +291,15 @@ static int vfd_close(struct inode *inode, struct file *file) context = (struct sasem_context *) file->private_data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + ": %s: no context for device\n", __func__); return -ENODEV; } mutex_lock(&context->ctx_lock); if (!context->vfd_isopen) { - err("%s: VFD is not open", __func__); + dev_err(&context->dev->dev, "%s: VFD is not open\n", __func__); retval = -EIO; } else { context->vfd_isopen = 0; @@ -339,7 +344,8 @@ static int send_packet(struct sasem_context *context) retval = usb_submit_urb(context->tx_urb, GFP_KERNEL); if (retval) { atomic_set(&(context->tx.busy), 0); - err("%s: error submitting urb (%d)", __func__, retval); + dev_err(&context->dev->dev, "%s: error submitting urb (%d)\n", + __func__, retval); } else { /* Wait for transmission to complete (or abort) */ mutex_unlock(&context->ctx_lock); @@ -348,7 +354,9 @@ static int send_packet(struct sasem_context *context) retval = context->tx.status; if (retval) - err("%s: packet tx failed (%d)", __func__, retval); + dev_err(&context->dev->dev, + "%s: packet tx failed (%d)\n", + __func__, retval); } return retval; @@ -369,20 +377,23 @@ static ssize_t vfd_write(struct file *file, const char *buf, context = (struct sasem_context *) file->private_data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + ": %s: no context for device\n", __func__); return -ENODEV; } mutex_lock(&context->ctx_lock); if (!context->dev_present) { - err("%s: no Sasem device present", __func__); + printk(KERN_ERR KBUILD_MODNAME + ": %s: no Sasem device present\n", __func__); retval = -ENODEV; goto exit; } if (n_bytes <= 0 || n_bytes > SASEM_DATA_BUF_SZ) { - err("%s: invalid payload size", __func__); + dev_err(&context->dev->dev, "%s: invalid payload size\n", + __func__); retval = -EINVAL; goto exit; } @@ -440,9 +451,9 @@ static ssize_t vfd_write(struct file *file, const char *buf, } retval = send_packet(context); if (retval) { - - err("%s: send packet failed for packet #%d", - __func__, i); + dev_err(&context->dev->dev, + "%s: send packet failed for packet #%d\n", + __func__, i); goto exit; } } @@ -492,7 +503,8 @@ static int ir_open(void *data) mutex_lock(&context->ctx_lock); if (context->ir_isopen) { - err("%s: IR port is already open", __func__); + dev_err(&context->dev->dev, "%s: IR port is already open\n", + __func__); retval = -EBUSY; goto exit; } @@ -506,8 +518,9 @@ static int ir_open(void *data) retval = usb_submit_urb(context->rx_urb, GFP_KERNEL); if (retval) - err("%s: usb_submit_urb failed for ir_open (%d)", - __func__, retval); + dev_err(&context->dev->dev, + "%s: usb_submit_urb failed for ir_open (%d)\n", + __func__, retval); else { context->ir_isopen = 1; printk(KERN_INFO "IR port opened\n"); @@ -529,7 +542,8 @@ static void ir_close(void *data) context = (struct sasem_context *)data; if (!context) { - err("%s: no context for device", __func__); + printk(KERN_ERR KBUILD_MODNAME + ": %s: no context for device\n", __func__); return; } @@ -687,7 +701,7 @@ static int sasem_probe(struct usb_interface *interface, struct sasem_context *context = NULL; int i; - printk(KERN_INFO "%s: found Sasem device\n", __func__); + dev_info(&interface->dev, "%s: found Sasem device\n", __func__); dev = usb_get_dev(interface_to_usbdev(interface)); @@ -719,8 +733,8 @@ static int sasem_probe(struct usb_interface *interface, rx_endpoint = ep; ir_ep_found = 1; if (debug) - printk(KERN_INFO "%s: found IR endpoint\n", - __func__); + dev_info(&interface->dev, + "%s: found IR endpoint\n", __func__); } else if (!vfd_ep_found && ep_dir == USB_DIR_OUT && @@ -729,22 +743,23 @@ static int sasem_probe(struct usb_interface *interface, tx_endpoint = ep; vfd_ep_found = 1; if (debug) - printk(KERN_INFO "%s: found VFD endpoint\n", - __func__); + dev_info(&interface->dev, + "%s: found VFD endpoint\n", __func__); } } /* Input endpoint is mandatory */ if (!ir_ep_found) { - - err("%s: no valid input (IR) endpoint found.", __func__); + dev_err(&interface->dev, + "%s: no valid input (IR) endpoint found.\n", __func__); retval = -ENODEV; goto exit; } if (!vfd_ep_found) - printk(KERN_INFO "%s: no valid output (VFD) endpoint found.\n", - __func__); + dev_info(&interface->dev, + "%s: no valid output (VFD) endpoint found.\n", + __func__); /* Allocate memory */ @@ -752,38 +767,44 @@ static int sasem_probe(struct usb_interface *interface, context = kzalloc(sizeof(struct sasem_context), GFP_KERNEL); if (!context) { - err("%s: kzalloc failed for context", __func__); + dev_err(&interface->dev, + "%s: kzalloc failed for context\n", __func__); alloc_status = 1; goto alloc_status_switch; } driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL); if (!driver) { - err("%s: kzalloc failed for lirc_driver", __func__); + dev_err(&interface->dev, + "%s: kzalloc failed for lirc_driver\n", __func__); alloc_status = 2; goto alloc_status_switch; } rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL); if (!rbuf) { - err("%s: kmalloc failed for lirc_buffer", __func__); + dev_err(&interface->dev, + "%s: kmalloc failed for lirc_buffer\n", __func__); alloc_status = 3; goto alloc_status_switch; } if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) { - err("%s: lirc_buffer_init failed", __func__); + dev_err(&interface->dev, + "%s: lirc_buffer_init failed\n", __func__); alloc_status = 4; goto alloc_status_switch; } rx_urb = usb_alloc_urb(0, GFP_KERNEL); if (!rx_urb) { - err("%s: usb_alloc_urb failed for IR urb", __func__); + dev_err(&interface->dev, + "%s: usb_alloc_urb failed for IR urb\n", __func__); alloc_status = 5; goto alloc_status_switch; } if (vfd_ep_found) { tx_urb = usb_alloc_urb(0, GFP_KERNEL); if (!tx_urb) { - err("%s: usb_alloc_urb failed for VFD urb", - __func__); + dev_err(&interface->dev, + "%s: usb_alloc_urb failed for VFD urb", + __func__); alloc_status = 6; goto alloc_status_switch; } @@ -807,7 +828,8 @@ static int sasem_probe(struct usb_interface *interface, lirc_minor = lirc_register_driver(driver); if (lirc_minor < 0) { - err("%s: lirc_register_driver failed", __func__); + dev_err(&interface->dev, + "%s: lirc_register_driver failed\n", __func__); alloc_status = 7; retval = lirc_minor; goto unlock; -- cgit v0.10.2 From b883052e0176d8c0c3b9375d19749c3897ad1bc2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 24 Apr 2012 09:03:48 -0700 Subject: USB: Staging: media: lirc: lirc_ttusbir: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead Cc: Jarod Wilson Cc: Mauro Carvalho Chehab Cc: Jesper Juhl Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/media/lirc/lirc_ttusbir.c b/drivers/staging/media/lirc/lirc_ttusbir.c index 7950887..3bb865c 100644 --- a/drivers/staging/media/lirc/lirc_ttusbir.c +++ b/drivers/staging/media/lirc/lirc_ttusbir.c @@ -113,8 +113,9 @@ static int set_use_inc(void *data) for (i = 0; i < num_urbs; i++) { retval = usb_submit_urb(ttusbir->urb[i], GFP_KERNEL); if (retval) { - err("%s: usb_submit_urb failed on urb %d", - __func__, i); + dev_err(&ttusbir->interf->dev, + "%s: usb_submit_urb failed on urb %d\n", + __func__, i); return retval; } } @@ -278,7 +279,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id) if (ttusbir->alt_setting != -1) DPRINTK("alt setting: %d\n", ttusbir->alt_setting); else { - err("Could not find alternate setting\n"); + dev_err(&intf->dev, "Could not find alternate setting\n"); kfree(ttusbir); return -EINVAL; } @@ -291,7 +292,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id) /* Register as a LIRC driver */ if (lirc_buffer_init(&ttusbir->rbuf, sizeof(int), 256) < 0) { - err("Could not get memory for LIRC data buffer\n"); + dev_err(&intf->dev, "Could not get memory for LIRC data buffer\n"); usb_set_intfdata(intf, NULL); kfree(ttusbir); return -ENOMEM; @@ -310,7 +311,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id) ttusbir->driver.features = LIRC_CAN_REC_MODE2; ttusbir->minor = lirc_register_driver(&ttusbir->driver); if (ttusbir->minor < 0) { - err("Error registering as LIRC driver\n"); + dev_err(&intf->dev, "Error registering as LIRC driver\n"); usb_set_intfdata(intf, NULL); lirc_buffer_free(&ttusbir->rbuf); kfree(ttusbir); @@ -321,7 +322,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id) for (i = 0; i < num_urbs; i++) { ttusbir->urb[i] = usb_alloc_urb(8, GFP_KERNEL); if (!ttusbir->urb[i]) { - err("Could not allocate memory for the URB\n"); + dev_err(&intf->dev, "Could not allocate memory for the URB\n"); for (j = i - 1; j >= 0; j--) kfree(ttusbir->urb[j]); lirc_buffer_free(&ttusbir->rbuf); -- cgit v0.10.2 From 92206f47d969724023694b264196847d4c84487f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 24 Apr 2012 09:04:42 -0700 Subject: USB: Staging: quatech_usb3: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead Cc: Rusty Russell Cc: Alan Stern Cc: Mauro Carvalho Chehab Cc: Kautuk Consul Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c index bb977e0..679b249 100644 --- a/drivers/staging/quatech_usb2/quatech_usb2.c +++ b/drivers/staging/quatech_usb2/quatech_usb2.c @@ -541,7 +541,7 @@ int qt2_open(struct tty_struct *tty, struct usb_serial_port *port) dbg("port->write_urb == NULL, allocating one"); port->write_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->write_urb) { - err("Allocating write URB failed"); + dev_err(&port->dev, "Allocating write URB failed\n"); return -ENOMEM; } /* buffer same size as port0 */ @@ -549,7 +549,7 @@ int qt2_open(struct tty_struct *tty, struct usb_serial_port *port) port->bulk_out_buffer = kmalloc(port->bulk_out_size, GFP_KERNEL); if (!port->bulk_out_buffer) { - err("Couldn't allocate bulk_out_buffer"); + dev_err(&port->dev, "Couldn't allocate bulk_out_buffer\n"); return -ENOMEM; } } -- cgit v0.10.2 From 33f7a67e477f780b82ef36ce358f6d5290d6a9b2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 24 Apr 2012 09:05:21 -0700 Subject: USB: Staging: serqt_usb2: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. Cc: Bill Pemberton Cc: Rusty Russell Cc: Alan Stern Cc: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index ae1d815..0ec83aa 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -1559,8 +1559,9 @@ static void qt_unthrottle(struct tty_struct *tty) qt_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed restarting read urb, error %d", - __func__, result); + dev_err(&port->dev, + "%s - failed restarting read urb, error %d\n", + __func__, result); } } mutex_unlock(&qt_port->lock); -- cgit v0.10.2 From 81d5a6729018ef18dcc1a555144ce91eb3c9abc4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 25 Apr 2012 15:56:29 +0200 Subject: USB: opticon: fix abuse of interface data Fix abuse of interface data which was used to signal device disconnect. Use the usb_serial disconnect flag and mutex where appropriate. Note that tiocmget does not need to check for disconnect as it does not access the device. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 82cc9d2..d31e997 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -401,8 +401,6 @@ static int opticon_tiocmget(struct tty_struct *tty) int result = 0; dbg("%s - port %d", __func__, port->number); - if (!usb_get_intfdata(port->serial->interface)) - return -ENODEV; spin_lock_irqsave(&priv->lock, flags); if (priv->rts) @@ -419,13 +417,13 @@ static int opticon_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; struct opticon_private *priv = usb_get_serial_data(port->serial); unsigned long flags; bool rts; bool changed = false; + int ret; - if (!usb_get_intfdata(port->serial->interface)) - return -ENODEV; /* We only support RTS so we only handle that */ spin_lock_irqsave(&priv->lock, flags); @@ -441,7 +439,14 @@ static int opticon_tiocmset(struct tty_struct *tty, return 0; /* Send the new RTS state to the connected device */ - return send_control_msg(port, CONTROL_RTS, !rts); + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + ret = send_control_msg(port, CONTROL_RTS, !rts); + else + ret = -ENODEV; + mutex_unlock(&serial->disc_mutex); + + return ret; } static int get_serial_info(struct opticon_private *priv, -- cgit v0.10.2 From 1c5176692457c3f249559d29a69affad7447b326 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 25 Apr 2012 15:56:30 +0200 Subject: USB: oti6858: fix abuse of interface data Fix abuse of interface data which was used to signal device disconnect. Note that neither tiocmset or tiocmget need to check for disconnect as they do not access the device. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 5fdc33c..8bc8ea4 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -633,9 +633,6 @@ static int oti6858_tiocmset(struct tty_struct *tty, dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)", __func__, port->number, set, clear); - if (!usb_get_intfdata(port->serial->interface)) - return -ENODEV; - /* FIXME: check if this is correct (active high/low) */ spin_lock_irqsave(&priv->lock, flags); control = priv->pending_setup.control; @@ -665,9 +662,6 @@ static int oti6858_tiocmget(struct tty_struct *tty) dbg("%s(port = %d)", __func__, port->number); - if (!usb_get_intfdata(port->serial->interface)) - return -ENODEV; - spin_lock_irqsave(&priv->lock, flags); pin_state = priv->status.pin_state & PIN_MASK; spin_unlock_irqrestore(&priv->lock, flags); -- cgit v0.10.2 From 6f1efd6c5aa63ddcfe1ffc60ade716f5421766f4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 25 Apr 2012 15:56:31 +0200 Subject: USB: pl2303: fix abuse of interface data Fix abuse of interface data which was used to signal device disconnect. Use the usb_serial disconnect flag and mutex where appropriate. Note that tiocmget does not need to check for disconnect as it does not access the device. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index a1a9062..4917b4e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -523,12 +523,11 @@ static int pl2303_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 control; - - if (!usb_get_intfdata(port->serial->interface)) - return -ENODEV; + int ret; spin_lock_irqsave(&priv->lock, flags); if (set & TIOCM_RTS) @@ -542,7 +541,14 @@ static int pl2303_tiocmset(struct tty_struct *tty, control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); - return set_control_lines(port->serial->dev, control); + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + ret = set_control_lines(serial->dev, control); + else + ret = -ENODEV; + mutex_unlock(&serial->disc_mutex); + + return ret; } static int pl2303_tiocmget(struct tty_struct *tty) @@ -556,9 +562,6 @@ static int pl2303_tiocmget(struct tty_struct *tty) dbg("%s (%d)", __func__, port->number); - if (!usb_get_intfdata(port->serial->interface)) - return -ENODEV; - spin_lock_irqsave(&priv->lock, flags); mcr = priv->line_control; status = priv->line_status; -- cgit v0.10.2 From bdce6612a0562e64acec92bbf6dce567609f5867 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 25 Apr 2012 15:56:32 +0200 Subject: USB: serial: fix interface data use The interface data should not be used as a flag to signal disconnect. Now that all serial drivers use the usb_serial disconnect flag and mutex, we can set the interface data prior to registering the ports and there's no need to clear it at disconnect. This should hopefully also make it more clear that the interface data is not a flag, which could prevent future misuse. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 97355a1..906f06e 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1043,6 +1043,8 @@ int usb_serial_probe(struct usb_interface *interface, dbg("the device claims to support interrupt out transfers, but write_int_callback is not defined"); } + usb_set_intfdata(interface, serial); + /* if this device type has an attach function, call it */ if (type->attach) { retval = type->attach(serial); @@ -1087,10 +1089,7 @@ int usb_serial_probe(struct usb_interface *interface, serial->disconnected = 0; usb_serial_console_init(debug, minor); - exit: - /* success */ - usb_set_intfdata(interface, serial); module_put(type->driver.owner); return 0; @@ -1112,7 +1111,6 @@ void usb_serial_disconnect(struct usb_interface *interface) dbg("%s", __func__); mutex_lock(&serial->disc_mutex); - usb_set_intfdata(interface, NULL); /* must set a flag, to signal subdrivers */ serial->disconnected = 1; mutex_unlock(&serial->disc_mutex); -- cgit v0.10.2 From c5b4ee64ae4adc14ba803f5efebf212e06d022c1 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 25 Apr 2012 16:12:07 +0200 Subject: USB: serial: remove redundant write-urb kill Since commit 1ce7b9349fad ("USB: serial: reuse generic write urb and bulk-out buffer") the port write_urb is simply a pointer to the first member of write_urbs so there's no need to kill it twice. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 664deb6..f6c63d3 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -144,7 +144,6 @@ static void generic_cleanup(struct usb_serial_port *port) if (serial->dev) { /* shutdown any bulk transfers that might be going on */ if (port->bulk_out_size) { - usb_kill_urb(port->write_urb); for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) usb_kill_urb(port->write_urbs[i]); -- cgit v0.10.2 From c1d830c5be5207ca0a4e936f135324ed7a2eea92 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 25 Apr 2012 16:12:08 +0200 Subject: USB: serial: fix double newlines in debug output Remove trailing newlines from debug messages. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index f6c63d3..7eee965 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -312,7 +312,7 @@ static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, if (!test_and_clear_bit(index, &port->read_urbs_free)) return 0; - dbg("%s - port %d, urb %d\n", __func__, port->number, index); + dbg("%s - port %d, urb %d", __func__, port->number, index); res = usb_submit_urb(port->read_urbs[index], mem_flags); if (res) { @@ -394,10 +394,10 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb) } set_bit(i, &port->read_urbs_free); - dbg("%s - port %d, urb %d, len %d\n", __func__, port->number, i, + dbg("%s - port %d, urb %d, len %d", __func__, port->number, i, urb->actual_length); if (urb->status) { - dbg("%s - non-zero urb status: %d\n", __func__, urb->status); + dbg("%s - non-zero urb status: %d", __func__, urb->status); return; } -- cgit v0.10.2 From 729be47735638c3441f67d8c7e99c20f6086e5df Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 25 Apr 2012 16:12:09 +0200 Subject: USB: pl2303: remove unused define Remove unused closing-wait define. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 4917b4e..c6bb88d 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -38,8 +38,6 @@ static bool debug; -#define PL2303_CLOSING_WAIT (30*HZ) - static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, -- cgit v0.10.2 From 50c627c9c39f38c2c2f50b8b24c86d47324d28c1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 12:37:47 -0700 Subject: USB: catc.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c index 182cfb4..5a73730 100644 --- a/drivers/net/usb/catc.c +++ b/drivers/net/usb/catc.c @@ -338,16 +338,18 @@ static void catc_irq_done(struct urb *urb) } else { catc->rx_urb->dev = catc->usbdev; if ((res = usb_submit_urb(catc->rx_urb, GFP_ATOMIC)) < 0) { - err("submit(rx_urb) status %d", res); + dev_err(&catc->usbdev->dev, + "submit(rx_urb) status %d\n", res); } } } resubmit: res = usb_submit_urb (urb, GFP_ATOMIC); if (res) - err ("can't resubmit intr, %s-%s, status %d", - catc->usbdev->bus->bus_name, - catc->usbdev->devpath, res); + dev_err(&catc->usbdev->dev, + "can't resubmit intr, %s-%s, status %d\n", + catc->usbdev->bus->bus_name, + catc->usbdev->devpath, res); } /* @@ -366,7 +368,8 @@ static int catc_tx_run(struct catc *catc) catc->tx_urb->dev = catc->usbdev; if ((status = usb_submit_urb(catc->tx_urb, GFP_ATOMIC)) < 0) - err("submit(tx_urb), status %d", status); + dev_err(&catc->usbdev->dev, "submit(tx_urb), status %d\n", + status); catc->tx_idx = !catc->tx_idx; catc->tx_ptr = 0; @@ -496,7 +499,8 @@ static void catc_ctrl_run(struct catc *catc) memcpy(catc->ctrl_buf, q->buf, q->len); if ((status = usb_submit_urb(catc->ctrl_urb, GFP_ATOMIC))) - err("submit(ctrl_urb) status %d", status); + dev_err(&catc->usbdev->dev, "submit(ctrl_urb) status %d\n", + status); } static void catc_ctrl_done(struct urb *urb) @@ -555,7 +559,7 @@ static int catc_ctrl_async(struct catc *catc, u8 dir, u8 request, u16 value, catc->ctrl_head = (catc->ctrl_head + 1) & (CTRL_QUEUE - 1); if (catc->ctrl_head == catc->ctrl_tail) { - err("ctrl queue full"); + dev_err(&catc->usbdev->dev, "ctrl queue full\n"); catc->ctrl_tail = (catc->ctrl_tail + 1) & (CTRL_QUEUE - 1); retval = -1; } @@ -714,7 +718,8 @@ static int catc_open(struct net_device *netdev) catc->irq_urb->dev = catc->usbdev; if ((status = usb_submit_urb(catc->irq_urb, GFP_KERNEL)) < 0) { - err("submit(irq_urb) status %d", status); + dev_err(&catc->usbdev->dev, "submit(irq_urb) status %d\n", + status); return -1; } @@ -769,7 +774,7 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id if (usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 1)) { - err("Can't set altsetting 1."); + dev_err(&intf->dev, "Can't set altsetting 1.\n"); return -EIO; } @@ -799,7 +804,7 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id catc->irq_urb = usb_alloc_urb(0, GFP_KERNEL); if ((!catc->ctrl_urb) || (!catc->tx_urb) || (!catc->rx_urb) || (!catc->irq_urb)) { - err("No free urbs available."); + dev_err(&intf->dev, "No free urbs available.\n"); usb_free_urb(catc->ctrl_urb); usb_free_urb(catc->tx_urb); usb_free_urb(catc->rx_urb); -- cgit v0.10.2 From 495f71e2b95d30198314e6e358987f8effbefcc9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 12:37:48 -0700 Subject: USB: ipheth.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c index dd78c4c..32519e5 100644 --- a/drivers/net/usb/ipheth.c +++ b/drivers/net/usb/ipheth.c @@ -209,7 +209,8 @@ static void ipheth_rcvbulk_callback(struct urb *urb) case 0: break; default: - err("%s: urb status: %d", __func__, status); + dev_err(&dev->intf->dev, "%s: urb status: %d\n", + __func__, status); return; } @@ -222,7 +223,8 @@ static void ipheth_rcvbulk_callback(struct urb *urb) skb = dev_alloc_skb(len); if (!skb) { - err("%s: dev_alloc_skb: -ENOMEM", __func__); + dev_err(&dev->intf->dev, "%s: dev_alloc_skb: -ENOMEM\n", + __func__); dev->net->stats.rx_dropped++; return; } @@ -251,7 +253,8 @@ static void ipheth_sndbulk_callback(struct urb *urb) status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN) - err("%s: urb status: %d", __func__, status); + dev_err(&dev->intf->dev, "%s: urb status: %d\n", + __func__, status); dev_kfree_skb_irq(dev->tx_skb); netif_wake_queue(dev->net); @@ -271,7 +274,8 @@ static int ipheth_carrier_set(struct ipheth_device *dev) dev->ctrl_buf, IPHETH_CTRL_BUF_SIZE, IPHETH_CTRL_TIMEOUT); if (retval < 0) { - err("%s: usb_control_msg: %d", __func__, retval); + dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n", + __func__, retval); return retval; } @@ -308,9 +312,11 @@ static int ipheth_get_macaddr(struct ipheth_device *dev) IPHETH_CTRL_BUF_SIZE, IPHETH_CTRL_TIMEOUT); if (retval < 0) { - err("%s: usb_control_msg: %d", __func__, retval); + dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n", + __func__, retval); } else if (retval < ETH_ALEN) { - err("%s: usb_control_msg: short packet: %d bytes", + dev_err(&dev->intf->dev, + "%s: usb_control_msg: short packet: %d bytes\n", __func__, retval); retval = -EINVAL; } else { @@ -335,7 +341,8 @@ static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags) retval = usb_submit_urb(dev->rx_urb, mem_flags); if (retval) - err("%s: usb_submit_urb: %d", __func__, retval); + dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n", + __func__, retval); return retval; } @@ -396,7 +403,8 @@ static int ipheth_tx(struct sk_buff *skb, struct net_device *net) retval = usb_submit_urb(dev->tx_urb, GFP_ATOMIC); if (retval) { - err("%s: usb_submit_urb: %d", __func__, retval); + dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n", + __func__, retval); dev->net->stats.tx_errors++; dev_kfree_skb_irq(skb); } else { @@ -414,7 +422,7 @@ static void ipheth_tx_timeout(struct net_device *net) { struct ipheth_device *dev = netdev_priv(net); - err("%s: TX timeout", __func__); + dev_err(&dev->intf->dev, "%s: TX timeout\n", __func__); dev->net->stats.tx_errors++; usb_unlink_urb(dev->tx_urb); } @@ -464,7 +472,7 @@ static int ipheth_probe(struct usb_interface *intf, hintf = usb_altnum_to_altsetting(intf, IPHETH_ALT_INTFNUM); if (hintf == NULL) { retval = -ENODEV; - err("Unable to find alternate settings interface"); + dev_err(&intf->dev, "Unable to find alternate settings interface\n"); goto err_endpoints; } @@ -477,7 +485,7 @@ static int ipheth_probe(struct usb_interface *intf, } if (!(dev->bulk_in && dev->bulk_out)) { retval = -ENODEV; - err("Unable to find endpoints"); + dev_err(&intf->dev, "Unable to find endpoints\n"); goto err_endpoints; } @@ -495,7 +503,7 @@ static int ipheth_probe(struct usb_interface *intf, retval = ipheth_alloc_urbs(dev); if (retval) { - err("error allocating urbs: %d", retval); + dev_err(&intf->dev, "error allocating urbs: %d\n", retval); goto err_alloc_urbs; } @@ -506,7 +514,7 @@ static int ipheth_probe(struct usb_interface *intf, retval = register_netdev(netdev); if (retval) { - err("error registering netdev: %d", retval); + dev_err(&intf->dev, "error registering netdev: %d\n", retval); retval = -EIO; goto err_register_netdev; } -- cgit v0.10.2 From db6b22196cc013968742d6c725f26ef6d8154048 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 12:37:48 -0700 Subject: USB: kaweth.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index df2a2cf..b8baf08 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -400,12 +400,13 @@ static int kaweth_download_firmware(struct kaweth_device *kaweth, ret = request_firmware(&fw, fwname, &kaweth->dev->dev); if (ret) { - err("Firmware request failed\n"); + dev_err(&kaweth->intf->dev, "Firmware request failed\n"); return ret; } if (fw->size > KAWETH_FIRMWARE_BUF_SIZE) { - err("Firmware too big: %zu", fw->size); + dev_err(&kaweth->intf->dev, "Firmware too big: %zu\n", + fw->size); release_firmware(fw); return -ENOSPC; } @@ -501,9 +502,10 @@ static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, gfp_t mf) } if (status) - err ("can't resubmit intr, %s-%s, status %d", - kaweth->dev->bus->bus_name, - kaweth->dev->devpath, status); + dev_err(&kaweth->intf->dev, + "can't resubmit intr, %s-%s, status %d\n", + kaweth->dev->bus->bus_name, + kaweth->dev->devpath, status); } static void int_callback(struct urb *u) @@ -576,7 +578,8 @@ static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth, kaweth->suspend_lowmem_rx = 1; schedule_delayed_work(&kaweth->lowmem_work, HZ/4); } - err("resubmitting rx_urb %d failed", result); + dev_err(&kaweth->intf->dev, "resubmitting rx_urb %d failed\n", + result); } else { kaweth->suspend_lowmem_rx = 0; } @@ -634,20 +637,21 @@ static void kaweth_usb_receive(struct urb *urb) spin_unlock(&kaweth->device_lock); if(status && status != -EREMOTEIO && count != 1) { - err("%s RX status: %d count: %d packet_len: %d", - net->name, - status, - count, - (int)pkt_len); + dev_err(&kaweth->intf->dev, + "%s RX status: %d count: %d packet_len: %d\n", + net->name, status, count, (int)pkt_len); kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC); return; } if(kaweth->net && (count > 2)) { if(pkt_len > (count - 2)) { - err("Packet length too long for USB frame (pkt_len: %x, count: %x)",pkt_len, count); - err("Packet len & 2047: %x", pkt_len & 2047); - err("Count 2: %x", count2); + dev_err(&kaweth->intf->dev, + "Packet length too long for USB frame (pkt_len: %x, count: %x)\n", + pkt_len, count); + dev_err(&kaweth->intf->dev, "Packet len & 2047: %x\n", + pkt_len & 2047); + dev_err(&kaweth->intf->dev, "Count 2: %x\n", count2); kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC); return; } @@ -686,7 +690,7 @@ static int kaweth_open(struct net_device *net) res = usb_autopm_get_interface(kaweth->intf); if (res) { - err("Interface cannot be resumed."); + dev_err(&kaweth->intf->dev, "Interface cannot be resumed.\n"); return -EIO; } res = kaweth_resubmit_rx_urb(kaweth, GFP_KERNEL); @@ -907,7 +911,8 @@ static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth) KAWETH_CONTROL_TIMEOUT); if(result < 0) { - err("Failed to set Rx mode: %d", result); + dev_err(&kaweth->intf->dev, "Failed to set Rx mode: %d\n", + result); } else { dbg("Set Rx mode to %d", packet_filter_bitmap); @@ -1045,7 +1050,8 @@ static int kaweth_probe( "kaweth/new_code.bin", 100, 2)) < 0) { - err("Error downloading firmware (%d)", result); + dev_err(&intf->dev, "Error downloading firmware (%d)\n", + result); goto err_fw; } @@ -1053,7 +1059,9 @@ static int kaweth_probe( "kaweth/new_code_fix.bin", 100, 3)) < 0) { - err("Error downloading firmware fix (%d)", result); + dev_err(&intf->dev, + "Error downloading firmware fix (%d)\n", + result); goto err_fw; } @@ -1061,7 +1069,9 @@ static int kaweth_probe( "kaweth/trigger_code.bin", 126, 2)) < 0) { - err("Error downloading trigger code (%d)", result); + dev_err(&intf->dev, + "Error downloading trigger code (%d)\n", + result); goto err_fw; } @@ -1070,13 +1080,14 @@ static int kaweth_probe( "kaweth/trigger_code_fix.bin", 126, 3)) < 0) { - err("Error downloading trigger code fix (%d)", result); + dev_err(&intf->dev, "Error downloading trigger code fix (%d)\n", result); goto err_fw; } if ((result = kaweth_trigger_firmware(kaweth, 126)) < 0) { - err("Error triggering firmware (%d)", result); + dev_err(&intf->dev, "Error triggering firmware (%d)\n", + result); goto err_fw; } @@ -1091,7 +1102,7 @@ err_fw: result = kaweth_read_configuration(kaweth); if(result < 0) { - err("Error reading configuration (%d), no net device created", result); + dev_err(&intf->dev, "Error reading configuration (%d), no net device created\n", result); goto err_free_netdev; } @@ -1103,7 +1114,7 @@ err_fw: if(!memcmp(&kaweth->configuration.hw_addr, &bcast_addr, sizeof(bcast_addr))) { - err("Firmware not functioning properly, no net device created"); + dev_err(&intf->dev, "Firmware not functioning properly, no net device created\n"); goto err_free_netdev; } @@ -1113,7 +1124,7 @@ err_fw: } if(kaweth_set_sofs_wait(kaweth, KAWETH_SOFS_TO_WAIT) < 0) { - err("Error setting SOFS wait"); + dev_err(&intf->dev, "Error setting SOFS wait\n"); goto err_free_netdev; } @@ -1123,7 +1134,7 @@ err_fw: KAWETH_PACKET_FILTER_MULTICAST); if(result < 0) { - err("Error setting receive filter"); + dev_err(&intf->dev, "Error setting receive filter\n"); goto err_free_netdev; } @@ -1175,7 +1186,7 @@ err_fw: SET_NETDEV_DEV(netdev, &intf->dev); if (register_netdev(netdev) != 0) { - err("Error registering netdev."); + dev_err(&intf->dev, "Error registering netdev.\n"); goto err_intfdata; } -- cgit v0.10.2 From 21f524321bde856b16fc55925282e41b4545a111 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 12:37:49 -0700 Subject: USB: rtl8150.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Petko Manolov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index d363b31..65854cd 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -203,7 +203,8 @@ static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size) if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) { if (ret == -ENODEV) netif_device_detach(dev->netdev); - err("control request submission failed: %d", ret); + dev_err(&dev->udev->dev, + "control request submission failed: %d\n", ret); } else set_bit(RX_REG_SET, &dev->flags); @@ -516,9 +517,9 @@ resubmit: if (res == -ENODEV) netif_device_detach(dev->netdev); else if (res) - err ("can't resubmit intr, %s-%s/input0, status %d", - dev->udev->bus->bus_name, - dev->udev->devpath, res); + dev_err(&dev->udev->dev, + "can't resubmit intr, %s-%s/input0, status %d\n", + dev->udev->bus->bus_name, dev->udev->devpath, res); } static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message) @@ -890,11 +891,11 @@ static int rtl8150_probe(struct usb_interface *intf, dev->intr_interval = 100; /* 100ms */ if (!alloc_all_urbs(dev)) { - err("out of memory"); + dev_err(&intf->dev, "out of memory\n"); goto out; } if (!rtl8150_reset(dev)) { - err("couldn't reset the device"); + dev_err(&intf->dev, "couldn't reset the device\n"); goto out1; } fill_skb_pool(dev); @@ -903,7 +904,7 @@ static int rtl8150_probe(struct usb_interface *intf, usb_set_intfdata(intf, dev); SET_NETDEV_DEV(netdev, &intf->dev); if (register_netdev(netdev) != 0) { - err("couldn't register the device"); + dev_err(&intf->dev, "couldn't register the device\n"); goto out2; } -- cgit v0.10.2 From fee5952fba478a395798c99531dc095e440a6ef0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 12:37:49 -0700 Subject: USB: udlfb.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Bernie Thompson CC: Florian Tobias Schandinat Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c index a159b63..7af1e81 100644 --- a/drivers/video/udlfb.c +++ b/drivers/video/udlfb.c @@ -1594,7 +1594,7 @@ static int dlfb_usb_probe(struct usb_interface *interface, dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { - err("dlfb_usb_probe: failed alloc of dev struct\n"); + dev_err(&interface->dev, "dlfb_usb_probe: failed alloc of dev struct\n"); goto error; } -- cgit v0.10.2 From 9451df0ee893dbdfca626f2888654f321d241460 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:33:06 -0700 Subject: USB: staging: media: as102: convert to use module_usb_driver The as102 driver can be converted to use module_usb_driver() which saves a lot of code, and gets rid of an unwanted err() call at the same time. Cc: Mauro Carvalho Chehab Cc: Sylwester Nawrocki Cc: Piotr Chmura Cc: Devin Heitmueller Cc: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/media/as102/as102_drv.c b/drivers/staging/media/as102/as102_drv.c index ea4f992..ac92eaf 100644 --- a/drivers/staging/media/as102/as102_drv.c +++ b/drivers/staging/media/as102/as102_drv.c @@ -279,40 +279,8 @@ void as102_dvb_unregister(struct as102_dev_t *as102_dev) pr_info("Unregistered device %s", as102_dev->name); } -static int __init as102_driver_init(void) -{ - int ret; - - /* register this driver with the low level subsystem */ - ret = usb_register(&as102_usb_driver); - if (ret) - err("usb_register failed (ret = %d)", ret); - - return ret; -} - -/* - * Mandatory function : Adds a special section to the module indicating - * where initialisation function is defined - */ -module_init(as102_driver_init); - -/** - * as102_driver_exit - as102 driver exit point - * - * This function is called when device has to be removed. - */ -static void __exit as102_driver_exit(void) -{ - /* deregister this driver with the low level bus subsystem */ - usb_deregister(&as102_usb_driver); -} +module_usb_driver(as102_usb_driver); -/* - * required function for unload: Adds a special section to the module - * indicating where unload function is defined - */ -module_exit(as102_driver_exit); /* modinfo details */ MODULE_DESCRIPTION(DRIVER_FULL_NAME); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 7b22a8855a727c5d8265508cbba05437a68f7043 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:34:49 -0700 Subject: USB: iforce: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. Cc: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index 405febd..daeeb4c 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -317,7 +317,8 @@ int iforce_init_device(struct iforce *iforce) break; if (i == 20) { /* 5 seconds */ - err("Timeout waiting for response from device."); + dev_err(&input_dev->dev, + "Timeout waiting for response from device.\n"); error = -ENODEV; goto fail; } diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c index a17b500..137326a 100644 --- a/drivers/input/joystick/iforce/iforce-packets.c +++ b/drivers/input/joystick/iforce/iforce-packets.c @@ -257,7 +257,8 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet) status = usb_submit_urb(iforce->ctrl, GFP_ATOMIC); if (status) { - err("usb_submit_urb failed %d", status); + dev_err(&iforce->usbdev->dev, + "usb_submit_urb failed %d\n", status); return -1; } @@ -289,12 +290,15 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet) return -1; } #else - err("iforce_get_id_packet: iforce->bus = SERIO!"); + dev_err(&iforce->dev->dev, + "iforce_get_id_packet: iforce->bus = SERIO!\n"); #endif break; default: - err("iforce_get_id_packet: iforce->bus = %d", iforce->bus); + dev_err(&iforce->dev->dev, + "iforce_get_id_packet: iforce->bus = %d\n", + iforce->bus); break; } diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 6c96631..ecbfae7 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -100,8 +100,9 @@ static void iforce_usb_irq(struct urb *urb) exit: status = usb_submit_urb (urb, GFP_ATOMIC); if (status) - err ("%s - usb_submit_urb failed with result %d", - __func__, status); + dev_err(&iforce->usbdev->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, status); } static void iforce_usb_out(struct urb *urb) -- cgit v0.10.2 From 185a85518a6f0649c1d9ca959fa51c6b4dac292a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:20 -0700 Subject: USB: usbmouse.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Jiri Kosina Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/hid/usbhid/usbmouse.c b/drivers/hid/usbhid/usbmouse.c index 0f6be45..bf16d72 100644 --- a/drivers/hid/usbhid/usbmouse.c +++ b/drivers/hid/usbhid/usbmouse.c @@ -92,9 +92,10 @@ static void usb_mouse_irq(struct urb *urb) resubmit: status = usb_submit_urb (urb, GFP_ATOMIC); if (status) - err ("can't resubmit intr, %s-%s/input0, status %d", - mouse->usbdev->bus->bus_name, - mouse->usbdev->devpath, status); + dev_err(&mouse->usbdev->dev, + "can't resubmit intr, %s-%s/input0, status %d\n", + mouse->usbdev->bus->bus_name, + mouse->usbdev->devpath, status); } static int usb_mouse_open(struct input_dev *dev) -- cgit v0.10.2 From 9cb757bfac332cb43122c494597dce80e5424820 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:23 -0700 Subject: USB: xpad.c: remove err() usage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Dmitry Torokhov CC: "Magnus Hörlin" CC: Rusty Russell CC: Mauro Carvalho Chehab CC: Chris Moeller Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index fd7a0d5..bee9c00 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -492,8 +492,9 @@ static void xpad_irq_in(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err ("%s - usb_submit_urb failed with result %d", - __func__, retval); + dev_err(&xpad->udev->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); } static void xpad_bulk_out(struct urb *urb) @@ -516,6 +517,7 @@ static void xpad_bulk_out(struct urb *urb) #if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS) static void xpad_irq_out(struct urb *urb) { + struct usb_xpad *xpad = urb->context; int retval, status; status = urb->status; @@ -540,8 +542,9 @@ static void xpad_irq_out(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err("%s - usb_submit_urb failed with result %d", - __func__, retval); + dev_err(&xpad->udev->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); } static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) -- cgit v0.10.2 From 3f37d8e8e18f4ec7a1bb96ea95910e51e5775d5b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:25 -0700 Subject: USB: cm109.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Dmitry Torokhov CC: Axel Lin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index ab86051..412fe57 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -327,7 +327,9 @@ static void cm109_submit_buzz_toggle(struct cm109_dev *dev) error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); if (error) - err("%s: usb_submit_urb (urb_ctl) failed %d", __func__, error); + dev_err(&dev->intf->dev, + "%s: usb_submit_urb (urb_ctl) failed %d\n", + __func__, error); } /* @@ -349,7 +351,7 @@ static void cm109_urb_irq_callback(struct urb *urb) if (status) { if (status == -ESHUTDOWN) return; - err("%s: urb status %d", __func__, status); + dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status); } /* Special keys */ @@ -396,7 +398,8 @@ static void cm109_urb_irq_callback(struct urb *urb) error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); if (error) - err("%s: usb_submit_urb (urb_ctl) failed %d", + dev_err(&dev->intf->dev, + "%s: usb_submit_urb (urb_ctl) failed %d\n", __func__, error); } @@ -416,7 +419,7 @@ static void cm109_urb_ctl_callback(struct urb *urb) dev->ctl_data->byte[3]); if (status) - err("%s: urb status %d", __func__, status); + dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status); spin_lock(&dev->ctl_submit_lock); @@ -433,7 +436,8 @@ static void cm109_urb_ctl_callback(struct urb *urb) dev->irq_urb_pending = 1; error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC); if (error) - err("%s: usb_submit_urb (urb_irq) failed %d", + dev_err(&dev->intf->dev, + "%s: usb_submit_urb (urb_irq) failed %d\n", __func__, error); } } @@ -476,7 +480,8 @@ static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on) dev->ctl_data, USB_PKT_LEN, USB_CTRL_SET_TIMEOUT); if (error < 0 && error != -EINTR) - err("%s: usb_control_msg() failed %d", __func__, error); + dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n", + __func__, error); } static void cm109_stop_traffic(struct cm109_dev *dev) @@ -518,8 +523,8 @@ static int cm109_input_open(struct input_dev *idev) error = usb_autopm_get_interface(dev->intf); if (error < 0) { - err("%s - cannot autoresume, result %d", - __func__, error); + dev_err(&idev->dev, "%s - cannot autoresume, result %d\n", + __func__, error); return error; } @@ -537,7 +542,8 @@ static int cm109_input_open(struct input_dev *idev) error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL); if (error) - err("%s: usb_submit_urb (urb_ctl) failed %d", __func__, error); + dev_err(&idev->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", + __func__, error); else dev->open = 1; @@ -710,7 +716,8 @@ static int cm109_usb_probe(struct usb_interface *intf, pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); if (ret != USB_PKT_LEN) - err("invalid payload size %d, expected %d", ret, USB_PKT_LEN); + dev_err(&intf->dev, "invalid payload size %d, expected %d\n", + ret, USB_PKT_LEN); /* initialise irq urb */ usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data, -- cgit v0.10.2 From 4efeca581bc84105c2e82d28a3a29e6cd9784204 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:28 -0700 Subject: USB: keyspan_remote.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c index d99151a..9a45c88 100644 --- a/drivers/input/misc/keyspan_remote.c +++ b/drivers/input/misc/keyspan_remote.c @@ -267,7 +267,9 @@ static void keyspan_check_data(struct usb_keyspan *remote) remote->data.tester = remote->data.tester >> 6; remote->data.bits_left -= 6; } else { - err("%s - Unknown sequence found in system data.\n", __func__); + dev_err(&remote->udev->dev, + "%s - Unknown sequence found in system data.\n", + __func__); remote->stage = 0; return; } @@ -286,7 +288,9 @@ static void keyspan_check_data(struct usb_keyspan *remote) remote->data.tester = remote->data.tester >> 6; remote->data.bits_left -= 6; } else { - err("%s - Unknown sequence found in button data.\n", __func__); + dev_err(&remote->udev->dev, + "%s - Unknown sequence found in button data.\n", + __func__); remote->stage = 0; return; } @@ -302,7 +306,9 @@ static void keyspan_check_data(struct usb_keyspan *remote) remote->data.tester = remote->data.tester >> 6; remote->data.bits_left -= 6; } else { - err("%s - Error in message, invalid toggle.\n", __func__); + dev_err(&remote->udev->dev, + "%s - Error in message, invalid toggle.\n", + __func__); remote->stage = 0; return; } @@ -312,7 +318,8 @@ static void keyspan_check_data(struct usb_keyspan *remote) remote->data.tester = remote->data.tester >> 5; remote->data.bits_left -= 5; } else { - err("Bad message received, no stop bit found.\n"); + dev_err(&remote->udev->dev, + "Bad message received, no stop bit found.\n"); } dev_dbg(&remote->udev->dev, @@ -397,7 +404,9 @@ static void keyspan_irq_recv(struct urb *urb) resubmit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err ("%s - usb_submit_urb failed with result: %d", __func__, retval); + dev_err(&dev->udev->dev, + "%s - usb_submit_urb failed with result: %d\n", + __func__, retval); } static int keyspan_open(struct input_dev *dev) -- cgit v0.10.2 From 2385f3c3c757b6ffb766c320df4a7f7a45593f24 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:30 -0700 Subject: USB: powermate.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c index 538f704..71ec621 100644 --- a/drivers/input/misc/powermate.c +++ b/drivers/input/misc/powermate.c @@ -110,8 +110,9 @@ static void powermate_irq(struct urb *urb) exit: retval = usb_submit_urb (urb, GFP_ATOMIC); if (retval) - err ("%s - usb_submit_urb failed with result %d", - __func__, retval); + dev_err(&pm->udev->dev, + "%s - usb_submit_urb failed with result: %d\n", + __func__, retval); } /* Decide if we need to issue a control message and do so. Must be called with pm->lock taken */ -- cgit v0.10.2 From 08813d35d2ac6f304a53eb3a9ee59283fa7cc67f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:31 -0700 Subject: USB: yealink.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Henk Vergonet CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c index f4776e7..4984823 100644 --- a/drivers/input/misc/yealink.c +++ b/drivers/input/misc/yealink.c @@ -428,7 +428,8 @@ static void urb_irq_callback(struct urb *urb) int ret, status = urb->status; if (status) - err("%s - urb status %d", __func__, status); + dev_err(&yld->udev->dev, "%s - urb status %d\n", + __func__, status); switch (yld->irq_data->cmd) { case CMD_KEYPRESS: @@ -443,7 +444,8 @@ static void urb_irq_callback(struct urb *urb) break; default: - err("unexpected response %x", yld->irq_data->cmd); + dev_err(&yld->udev->dev, "unexpected response %x\n", + yld->irq_data->cmd); } yealink_do_idle_tasks(yld); @@ -451,7 +453,9 @@ static void urb_irq_callback(struct urb *urb) if (!yld->shutdown) { ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC); if (ret && ret != -EPERM) - err("%s - usb_submit_urb failed %d", __func__, ret); + dev_err(&yld->udev->dev, + "%s - usb_submit_urb failed %d\n", + __func__, ret); } } @@ -461,7 +465,8 @@ static void urb_ctl_callback(struct urb *urb) int ret = 0, status = urb->status; if (status) - err("%s - urb status %d", __func__, status); + dev_err(&yld->udev->dev, "%s - urb status %d\n", + __func__, status); switch (yld->ctl_data->cmd) { case CMD_KEYPRESS: @@ -479,7 +484,8 @@ static void urb_ctl_callback(struct urb *urb) } if (ret && ret != -EPERM) - err("%s - usb_submit_urb failed %d", __func__, ret); + dev_err(&yld->udev->dev, "%s - usb_submit_urb failed %d\n", + __func__, ret); } /******************************************************************************* @@ -909,7 +915,8 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); if (ret != USB_PKT_LEN) - err("invalid payload size %d, expected %zd", ret, USB_PKT_LEN); + dev_err(&intf->dev, "invalid payload size %d, expected %zd\n", + ret, USB_PKT_LEN); /* initialise irq urb */ usb_fill_int_urb(yld->urb_irq, udev, pipe, yld->irq_data, -- cgit v0.10.2 From 9c113dc67ab712e1bb82e974e51c49a678562713 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:31 -0700 Subject: USB: appletouch.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alessandro Rubini CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 0acbc7d..90db679 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -262,7 +262,7 @@ static int atp_geyser_init(struct usb_device *udev) data = kmalloc(8, GFP_KERNEL); if (!data) { - err("Out of memory"); + dev_err(&udev->dev, "Out of memory\n"); return -ENOMEM; } @@ -277,7 +277,7 @@ static int atp_geyser_init(struct usb_device *udev) for (i = 0; i < 8; i++) dprintk("appletouch[%d]: %d\n", i, data[i]); - err("Failed to read mode from device."); + dev_err(&udev->dev, "Failed to read mode from device.\n"); ret = -EIO; goto out_free; } @@ -296,7 +296,7 @@ static int atp_geyser_init(struct usb_device *udev) for (i = 0; i < 8; i++) dprintk("appletouch[%d]: %d\n", i, data[i]); - err("Failed to request geyser raw mode"); + dev_err(&udev->dev, "Failed to request geyser raw mode\n"); ret = -EIO; goto out_free; } @@ -321,8 +321,9 @@ static void atp_reinit(struct work_struct *work) retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) - err("atp_reinit: usb_submit_urb failed with error %d", - retval); + dev_err(&udev->dev, + "atp_reinit: usb_submit_urb failed with error %d\n", + retval); } static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, @@ -588,8 +589,9 @@ static void atp_complete_geyser_1_2(struct urb *urb) exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) - err("atp_complete: usb_submit_urb failed with result %d", - retval); + dev_err(&dev->udev->dev, + "atp_complete: usb_submit_urb failed with result %d\n", + retval); } /* Interrupt function for older touchpads: GEYSER3/GEYSER4 */ @@ -722,8 +724,9 @@ static void atp_complete_geyser_3_4(struct urb *urb) exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) - err("atp_complete: usb_submit_urb failed with result %d", - retval); + dev_err(&dev->udev->dev, + "atp_complete: usb_submit_urb failed with result %d\n", + retval); } static int atp_open(struct input_dev *input) @@ -785,7 +788,7 @@ static int atp_probe(struct usb_interface *iface, } } if (!int_in_endpointAddr) { - err("Could not find int-in endpoint"); + dev_err(&iface->dev, "Could not find int-in endpoint\n"); return -EIO; } @@ -793,7 +796,7 @@ static int atp_probe(struct usb_interface *iface, dev = kzalloc(sizeof(struct atp), GFP_KERNEL); input_dev = input_allocate_device(); if (!dev || !input_dev) { - err("Out of memory"); + dev_err(&iface->dev, "Out of memory\n"); goto err_free_devs; } -- cgit v0.10.2 From 6c1d1b246199c75486f5ffa677cf0e411ce4ac6e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:31 -0700 Subject: USB: bcm5974.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Henrik Rydberg CC: Alessandro Rubini CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index f9e2758..8cd7c93 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -584,7 +584,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) int retval = 0, size; if (!data) { - err("bcm5974: out of memory"); + dev_err(&dev->intf->dev, "out of memory\n"); retval = -ENOMEM; goto out; } @@ -597,7 +597,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { - err("bcm5974: could not read from device"); + dev_err(&dev->intf->dev, "could not read from device\n"); retval = -EIO; goto out; } @@ -615,7 +615,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { - err("bcm5974: could not write to device"); + dev_err(&dev->intf->dev, "could not write to device\n"); retval = -EIO; goto out; } @@ -654,7 +654,7 @@ static void bcm5974_irq_button(struct urb *urb) exit: error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC); if (error) - err("bcm5974: button urb failed: %d", error); + dev_err(&dev->intf->dev, "button urb failed: %d\n", error); } static void bcm5974_irq_trackpad(struct urb *urb) @@ -687,7 +687,7 @@ static void bcm5974_irq_trackpad(struct urb *urb) exit: error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC); if (error) - err("bcm5974: trackpad urb failed: %d", error); + dev_err(&dev->intf->dev, "trackpad urb failed: %d\n", error); } /* @@ -833,7 +833,7 @@ static int bcm5974_probe(struct usb_interface *iface, dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL); input_dev = input_allocate_device(); if (!dev || !input_dev) { - err("bcm5974: out of memory"); + dev_err(&iface->dev, "out of memory\n"); goto err_free_devs; } -- cgit v0.10.2 From b59c82bd6f9d60dd09dd2c696fb1894802ae3e33 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:34 -0700 Subject: USB: acecad.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c index f8b0b1d..da6c341 100644 --- a/drivers/input/tablet/acecad.c +++ b/drivers/input/tablet/acecad.c @@ -105,8 +105,10 @@ static void usb_acecad_irq(struct urb *urb) resubmit: status = usb_submit_urb(urb, GFP_ATOMIC); if (status) - err("can't resubmit intr, %s-%s/input0, status %d", - acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status); + dev_err(&acecad->usbdev->dev, + "can't resubmit intr, %s-%s/input0, status %d\n", + acecad->usbdev->bus->bus_name, + acecad->usbdev->devpath, status); } static int usb_acecad_open(struct input_dev *dev) -- cgit v0.10.2 From 1f80bb943d755d48b894c677097fd80c7d7cce16 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:36 -0700 Subject: USB: aiptek.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Dmitry Torokhov CC: Jesper Juhl CC: JJ Ding CC: Edwin van Vliet Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index 205d16a..b8d43eb 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -811,8 +811,9 @@ static void aiptek_irq(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval != 0) { - err("%s - usb_submit_urb failed with result %d", - __func__, retval); + dev_err(&aiptek->usbdev->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); } } -- cgit v0.10.2 From 3bd9597a6b8d5111c698a38761c4e2883cdcf8c9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:39 -0700 Subject: USB: gtco.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c index 89a2978..fed555b 100644 --- a/drivers/input/tablet/gtco.c +++ b/drivers/input/tablet/gtco.c @@ -2,8 +2,6 @@ GTCO digitizer USB driver -Use the err() and dbg() macros from usb.h for system logging - TO CHECK: Is pressure done right on report 5? Copyright (C) 2006 GTCO CalComp @@ -808,7 +806,8 @@ static void gtco_urb_callback(struct urb *urbinfo) resubmit: rc = usb_submit_urb(urbinfo, GFP_ATOMIC); if (rc != 0) - err("usb_submit_urb failed rc=0x%x", rc); + dev_err(&device->usbdev->dev, + "usb_submit_urb failed rc=0x%x\n", rc); } /* @@ -838,7 +837,7 @@ static int gtco_probe(struct usb_interface *usbinterface, gtco = kzalloc(sizeof(struct gtco), GFP_KERNEL); input_dev = input_allocate_device(); if (!gtco || !input_dev) { - err("No more memory"); + dev_err(&usbinterface->dev, "No more memory\n"); error = -ENOMEM; goto err_free_devs; } @@ -853,7 +852,7 @@ static int gtco_probe(struct usb_interface *usbinterface, gtco->buffer = usb_alloc_coherent(gtco->usbdev, REPORT_MAX_SIZE, GFP_KERNEL, >co->buf_dma); if (!gtco->buffer) { - err("No more memory for us buffers"); + dev_err(&usbinterface->dev, "No more memory for us buffers\n"); error = -ENOMEM; goto err_free_devs; } @@ -861,7 +860,7 @@ static int gtco_probe(struct usb_interface *usbinterface, /* Allocate URB for reports */ gtco->urbinfo = usb_alloc_urb(0, GFP_KERNEL); if (!gtco->urbinfo) { - err("Failed to allocate URB"); + dev_err(&usbinterface->dev, "Failed to allocate URB\n"); error = -ENOMEM; goto err_free_buf; } @@ -888,7 +887,8 @@ static int gtco_probe(struct usb_interface *usbinterface, */ if (usb_get_extra_descriptor(usbinterface->cur_altsetting, HID_DEVICE_TYPE, &hid_desc) != 0){ - err("Can't retrieve exta USB descriptor to get hid report descriptor length"); + dev_err(&usbinterface->dev, + "Can't retrieve exta USB descriptor to get hid report descriptor length\n"); error = -EIO; goto err_free_urb; } @@ -898,7 +898,7 @@ static int gtco_probe(struct usb_interface *usbinterface, report = kzalloc(le16_to_cpu(hid_desc->wDescriptorLength), GFP_KERNEL); if (!report) { - err("No more memory for report"); + dev_err(&usbinterface->dev, "No more memory for report\n"); error = -ENOMEM; goto err_free_urb; } @@ -926,8 +926,9 @@ static int gtco_probe(struct usb_interface *usbinterface, /* If we didn't get the report, fail */ if (result != le16_to_cpu(hid_desc->wDescriptorLength)) { - err("Failed to get HID Report Descriptor of size: %d", - hid_desc->wDescriptorLength); + dev_err(&usbinterface->dev, + "Failed to get HID Report Descriptor of size: %d\n", + hid_desc->wDescriptorLength); error = -EIO; goto err_free_urb; } -- cgit v0.10.2 From 202712c2322a1b87f3359046f5ebe92e0384ff6d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:41 -0700 Subject: USB: kbtab.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c index 85a5b40..1eb6341 100644 --- a/drivers/input/tablet/kbtab.c +++ b/drivers/input/tablet/kbtab.c @@ -80,8 +80,9 @@ static void kbtab_irq(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err("%s - usb_submit_urb failed with result %d", - __func__, retval); + dev_err(&kbtab->usbdev->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); } static struct usb_device_id kbtab_ids[] = { -- cgit v0.10.2 From b3169fecb10594ac1182de904d367631a4dbdf1c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:44 -0700 Subject: USB: wacom_sys.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Dmitry Torokhov CC: Ping Cheng CC: Chris Bagwell CC: Eduard Hasenleithner CC: Jason Gerecke Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 0d26921..3db4684 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -122,8 +122,9 @@ static void wacom_sys_irq(struct urb *urb) usb_mark_last_busy(wacom->usbdev); retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err ("%s - usb_submit_urb failed with result %d", - __func__, retval); + dev_err(&wacom->intf->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); } static int wacom_open(struct input_dev *dev) -- cgit v0.10.2 From e27ad0fe9cca5e6c98c3af6d7021690b6960adf8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:46 -0700 Subject: USB: usbtouchscreen.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Dmitry Torokhov CC: Henrik Rydberg CC: Rusty Russell CC: Viresh Kumar CC: Armando Visconti Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 22cd96f..955441c 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -1380,8 +1380,9 @@ exit: usb_mark_last_busy(interface_to_usbdev(usbtouch->interface)); retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err("%s - usb_submit_urb failed with result: %d", - __func__, retval); + dev_err(&usbtouch->interface->dev, + "%s - usb_submit_urb failed with result: %d\n", + __func__, retval); } static int usbtouch_open(struct input_dev *input) @@ -1622,8 +1623,9 @@ static int usbtouch_probe(struct usb_interface *intf, err = usb_submit_urb(usbtouch->irq, GFP_KERNEL); if (err) { usb_autopm_put_interface(intf); - err("%s - usb_submit_urb failed with result: %d", - __func__, err); + dev_err(&intf->dev, + "%s - usb_submit_urb failed with result: %d\n", + __func__, err); goto out_unregister_input; } } -- cgit v0.10.2 From a581c72a8e9e9955714e8f3b62c46312bea3f6ba Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:47 -0700 Subject: USB: ov534_9.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Jean-Francois Moine CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/video/gspca/ov534_9.c index e6601b8..b579730 100644 --- a/drivers/media/video/gspca/ov534_9.c +++ b/drivers/media/video/gspca/ov534_9.c @@ -1376,7 +1376,7 @@ static int sd_init(struct gspca_dev *gspca_dev) ARRAY_SIZE(ov562x_init_2)); reg_w(gspca_dev, 0xe0, 0x00); } else { - err("Unknown sensor %04x", sensor_id); + pr_err("Unknown sensor %04x", sensor_id); return -EINVAL; } -- cgit v0.10.2 From d372c4197d642763a6fde0ed3baa7cfce78df22d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:49 -0700 Subject: USB: hdpvr-core.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Mauro Carvalho Chehab CC: Jarod Wilson CC: Taylor Ralph CC: Andrew Morton CC: Rusty Russell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c index 6510110..304f43e 100644 --- a/drivers/media/video/hdpvr/hdpvr-core.c +++ b/drivers/media/video/hdpvr/hdpvr-core.c @@ -303,7 +303,7 @@ static int hdpvr_probe(struct usb_interface *interface, /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) { - err("Out of memory"); + dev_err(&interface->dev, "Out of memory\n"); goto error; } @@ -311,7 +311,7 @@ static int hdpvr_probe(struct usb_interface *interface, /* register v4l2_device early so it can be used for printks */ if (v4l2_device_register(&interface->dev, &dev->v4l2_dev)) { - err("v4l2_device_register failed"); + dev_err(&interface->dev, "v4l2_device_register failed\n"); goto error; } -- cgit v0.10.2 From 3d55ea3e2233c994649d9e5dc9eff58f915cd81d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:49 -0700 Subject: USB: irda-usb.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index 72f687b..f9a86bd 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -1671,7 +1671,7 @@ static int irda_usb_probe(struct usb_interface *intf, /* Is this really necessary? (no, except maybe for broken devices) */ if (usb_reset_configuration (dev) < 0) { - err("reset_configuration failed"); + dev_err(&intf->dev, "reset_configuration failed\n"); ret = -EIO; goto err_out_3; } -- cgit v0.10.2 From 6f0d27ff97f66c041e2adc86b61e8957e8dd056d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:50 -0700 Subject: USB: kingsun-sir.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c index 79aebee..7b48338 100644 --- a/drivers/net/irda/kingsun-sir.c +++ b/drivers/net/irda/kingsun-sir.c @@ -134,14 +134,16 @@ static void kingsun_send_irq(struct urb *urb) /* in process of stopping, just drop data */ if (!netif_running(kingsun->netdev)) { - err("kingsun_send_irq: Network not running!"); + dev_err(&kingsun->usbdev->dev, + "kingsun_send_irq: Network not running!\n"); return; } /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("kingsun_send_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&kingsun->usbdev->dev, + "kingsun_send_irq: urb asynchronously failed - %d\n", + urb->status); } netif_wake_queue(netdev); } @@ -177,7 +179,8 @@ static netdev_tx_t kingsun_hard_xmit(struct sk_buff *skb, kingsun, 1); if ((ret = usb_submit_urb(kingsun->tx_urb, GFP_ATOMIC))) { - err("kingsun_hard_xmit: failed tx_urb submit: %d", ret); + dev_err(&kingsun->usbdev->dev, + "kingsun_hard_xmit: failed tx_urb submit: %d\n", ret); switch (ret) { case -ENODEV: case -EPIPE: @@ -211,8 +214,9 @@ static void kingsun_rcv_irq(struct urb *urb) /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("kingsun_rcv_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&kingsun->usbdev->dev, + "kingsun_rcv_irq: urb asynchronously failed - %d\n", + urb->status); kingsun->receiving = 0; return; } @@ -238,8 +242,9 @@ static void kingsun_rcv_irq(struct urb *urb) ? 1 : 0; } } else if (urb->actual_length > 0) { - err("%s(): Unexpected response length, expected %d got %d", - __func__, kingsun->max_rx, urb->actual_length); + dev_err(&kingsun->usbdev->dev, + "%s(): Unexpected response length, expected %d got %d\n", + __func__, kingsun->max_rx, urb->actual_length); } /* This urb has already been filled in kingsun_net_open */ ret = usb_submit_urb(urb, GFP_ATOMIC); @@ -286,7 +291,7 @@ static int kingsun_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); if (!kingsun->irlap) { - err("kingsun-sir: irlap_open failed"); + dev_err(&kingsun->usbdev->dev, "irlap_open failed\n"); goto free_mem; } @@ -298,7 +303,8 @@ static int kingsun_net_open(struct net_device *netdev) kingsun->rx_urb->status = 0; err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL); if (err) { - err("kingsun-sir: first urb-submit failed: %d", err); + dev_err(&kingsun->usbdev->dev, + "first urb-submit failed: %d\n", err); goto close_irlap; } @@ -446,13 +452,15 @@ static int kingsun_probe(struct usb_interface *intf, */ interface = intf->cur_altsetting; if (interface->desc.bNumEndpoints != 2) { - err("kingsun-sir: expected 2 endpoints, found %d", - interface->desc.bNumEndpoints); + dev_err(&intf->dev, + "kingsun-sir: expected 2 endpoints, found %d\n", + interface->desc.bNumEndpoints); return -ENODEV; } endpoint = &interface->endpoint[KINGSUN_EP_IN].desc; if (!usb_endpoint_is_int_in(endpoint)) { - err("kingsun-sir: endpoint 0 is not interrupt IN"); + dev_err(&intf->dev, + "kingsun-sir: endpoint 0 is not interrupt IN\n"); return -ENODEV; } @@ -460,14 +468,16 @@ static int kingsun_probe(struct usb_interface *intf, pipe = usb_rcvintpipe(dev, ep_in); maxp_in = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); if (maxp_in > 255 || maxp_in <= 1) { - err("%s: endpoint 0 has max packet size %d not in range", - __FILE__, maxp_in); + dev_err(&intf->dev, + "endpoint 0 has max packet size %d not in range\n", + maxp_in); return -ENODEV; } endpoint = &interface->endpoint[KINGSUN_EP_OUT].desc; if (!usb_endpoint_is_int_out(endpoint)) { - err("kingsun-sir: endpoint 1 is not interrupt OUT"); + dev_err(&intf->dev, + "kingsun-sir: endpoint 1 is not interrupt OUT\n"); return -ENODEV; } -- cgit v0.10.2 From 32279240abab6fe2d2399cea303d040f03fbc32c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:50 -0700 Subject: USB: ks959-sir.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c index abe689d..824e2a9 100644 --- a/drivers/net/irda/ks959-sir.c +++ b/drivers/net/irda/ks959-sir.c @@ -247,8 +247,9 @@ static void ks959_speed_irq(struct urb *urb) { /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("ks959_speed_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&urb->dev->dev, + "ks959_speed_irq: urb asynchronously failed - %d\n", + urb->status); } } @@ -332,14 +333,16 @@ static void ks959_send_irq(struct urb *urb) /* in process of stopping, just drop data */ if (!netif_running(kingsun->netdev)) { - err("ks959_send_irq: Network not running!"); + dev_err(&kingsun->usbdev->dev, + "ks959_send_irq: Network not running!\n"); return; } /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("ks959_send_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&kingsun->usbdev->dev, + "ks959_send_irq: urb asynchronously failed - %d\n", + urb->status); return; } @@ -358,8 +361,9 @@ static void ks959_send_irq(struct urb *urb) if (kingsun->tx_buf_clear_used > 0) { /* There is more data to be sent */ if ((ret = ks959_submit_tx_fragment(kingsun)) != 0) { - err("ks959_send_irq: failed tx_urb submit: %d", - ret); + dev_err(&kingsun->usbdev->dev, + "ks959_send_irq: failed tx_urb submit: %d\n", + ret); switch (ret) { case -ENODEV: case -EPIPE: @@ -407,7 +411,8 @@ static netdev_tx_t ks959_hard_xmit(struct sk_buff *skb, kingsun->tx_buf_clear_used = wraplen; if ((ret = ks959_submit_tx_fragment(kingsun)) != 0) { - err("ks959_hard_xmit: failed tx_urb submit: %d", ret); + dev_err(&kingsun->usbdev->dev, + "ks959_hard_xmit: failed tx_urb submit: %d\n", ret); switch (ret) { case -ENODEV: case -EPIPE: @@ -442,8 +447,9 @@ static void ks959_rcv_irq(struct urb *urb) /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("kingsun_rcv_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&kingsun->usbdev->dev, + "kingsun_rcv_irq: urb asynchronously failed - %d\n", + urb->status); kingsun->receiving = 0; return; } @@ -536,7 +542,7 @@ static int ks959_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); if (!kingsun->irlap) { - err("ks959-sir: irlap_open failed"); + dev_err(&kingsun->usbdev->dev, "irlap_open failed\n"); goto free_mem; } @@ -549,7 +555,8 @@ static int ks959_net_open(struct net_device *netdev) kingsun->rx_urb->status = 0; err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL); if (err) { - err("ks959-sir: first urb-submit failed: %d", err); + dev_err(&kingsun->usbdev->dev, + "first urb-submit failed: %d\n", err); goto close_irlap; } -- cgit v0.10.2 From d867c43e248fa9369eb40c443eeb5e8bdd717b04 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:51 -0700 Subject: USB: ksdazzle-sir.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c index f8c0108..5a278ab 100644 --- a/drivers/net/irda/ksdazzle-sir.c +++ b/drivers/net/irda/ksdazzle-sir.c @@ -168,10 +168,10 @@ struct ksdazzle_cb { static void ksdazzle_speed_irq(struct urb *urb) { /* unlink, shutdown, unplug, other nasties */ - if (urb->status != 0) { - err("ksdazzle_speed_irq: urb asynchronously failed - %d", - urb->status); - } + if (urb->status != 0) + dev_err(&urb->dev->dev, + "ksdazzle_speed_irq: urb asynchronously failed - %d\n", + urb->status); } /* Send a control request to change speed of the dongle */ @@ -245,14 +245,16 @@ static void ksdazzle_send_irq(struct urb *urb) /* in process of stopping, just drop data */ if (!netif_running(kingsun->netdev)) { - err("ksdazzle_send_irq: Network not running!"); + dev_err(&kingsun->usbdev->dev, + "ksdazzle_send_irq: Network not running!\n"); return; } /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("ksdazzle_send_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&kingsun->usbdev->dev, + "ksdazzle_send_irq: urb asynchronously failed - %d\n", + urb->status); return; } @@ -271,7 +273,9 @@ static void ksdazzle_send_irq(struct urb *urb) if (kingsun->tx_buf_clear_used > 0) { /* There is more data to be sent */ if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) { - err("ksdazzle_send_irq: failed tx_urb submit: %d", ret); + dev_err(&kingsun->usbdev->dev, + "ksdazzle_send_irq: failed tx_urb submit: %d\n", + ret); switch (ret) { case -ENODEV: case -EPIPE: @@ -320,7 +324,8 @@ static netdev_tx_t ksdazzle_hard_xmit(struct sk_buff *skb, kingsun->tx_buf_clear_used = wraplen; if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) { - err("ksdazzle_hard_xmit: failed tx_urb submit: %d", ret); + dev_err(&kingsun->usbdev->dev, + "ksdazzle_hard_xmit: failed tx_urb submit: %d\n", ret); switch (ret) { case -ENODEV: case -EPIPE: @@ -355,8 +360,9 @@ static void ksdazzle_rcv_irq(struct urb *urb) /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("ksdazzle_rcv_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&kingsun->usbdev->dev, + "ksdazzle_rcv_irq: urb asynchronously failed - %d\n", + urb->status); kingsun->receiving = 0; return; } @@ -430,7 +436,7 @@ static int ksdazzle_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); if (!kingsun->irlap) { - err("ksdazzle-sir: irlap_open failed"); + dev_err(&kingsun->usbdev->dev, "irlap_open failed\n"); goto free_mem; } @@ -442,7 +448,7 @@ static int ksdazzle_net_open(struct net_device *netdev) kingsun->rx_urb->status = 0; err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL); if (err) { - err("ksdazzle-sir: first urb-submit failed: %d", err); + dev_err(&kingsun->usbdev->dev, "first urb-submit failed: %d\n", err); goto close_irlap; } @@ -590,13 +596,14 @@ static int ksdazzle_probe(struct usb_interface *intf, */ interface = intf->cur_altsetting; if (interface->desc.bNumEndpoints != 2) { - err("ksdazzle: expected 2 endpoints, found %d", - interface->desc.bNumEndpoints); + dev_err(&intf->dev, "ksdazzle: expected 2 endpoints, found %d\n", + interface->desc.bNumEndpoints); return -ENODEV; } endpoint = &interface->endpoint[KINGSUN_EP_IN].desc; if (!usb_endpoint_is_int_in(endpoint)) { - err("ksdazzle: endpoint 0 is not interrupt IN"); + dev_err(&intf->dev, + "ksdazzle: endpoint 0 is not interrupt IN\n"); return -ENODEV; } @@ -604,13 +611,16 @@ static int ksdazzle_probe(struct usb_interface *intf, pipe = usb_rcvintpipe(dev, ep_in); maxp_in = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); if (maxp_in > 255 || maxp_in <= 1) { - err("ksdazzle: endpoint 0 has max packet size %d not in range [2..255]", maxp_in); + dev_err(&intf->dev, + "ksdazzle: endpoint 0 has max packet size %d not in range [2..255]\n", + maxp_in); return -ENODEV; } endpoint = &interface->endpoint[KINGSUN_EP_OUT].desc; if (!usb_endpoint_is_int_out(endpoint)) { - err("ksdazzle: endpoint 1 is not interrupt OUT"); + dev_err(&intf->dev, + "ksdazzle: endpoint 1 is not interrupt OUT\n"); return -ENODEV; } -- cgit v0.10.2 From 46267f4caa5fdf546a94b99b4c53c9424d2d4291 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:51 -0700 Subject: USB: stir4200.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Samuel Ortiz Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c index e6e59a0..876e709 100644 --- a/drivers/net/irda/stir4200.c +++ b/drivers/net/irda/stir4200.c @@ -904,7 +904,7 @@ static int stir_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", stir->usbdev->devnum); stir->irlap = irlap_open(netdev, &stir->qos, hwname); if (!stir->irlap) { - err("stir4200: irlap_open failed"); + dev_err(&stir->usbdev->dev, "irlap_open failed\n"); goto err_out5; } @@ -913,7 +913,7 @@ static int stir_net_open(struct net_device *netdev) "%s", stir->netdev->name); if (IS_ERR(stir->thread)) { err = PTR_ERR(stir->thread); - err("stir4200: unable to start kernel thread"); + dev_err(&stir->usbdev->dev, "unable to start kernel thread\n"); goto err_out6; } @@ -1042,7 +1042,7 @@ static int stir_probe(struct usb_interface *intf, ret = usb_reset_configuration(dev); if (ret != 0) { - err("stir4200: usb reset configuration failed"); + dev_err(&intf->dev, "usb reset configuration failed\n"); goto err_out2; } -- cgit v0.10.2 From 24c0328663623e1d10d7cc325f742b8d93b177ea Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:52 -0700 Subject: USB: at76c50x-usb.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: "John W. Linville" Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 4045e5a..cc741b3 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -1955,7 +1955,7 @@ static int at76_hw_scan(struct ieee80211_hw *hw, ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan)); if (ret < 0) { - err("CMD_SCAN failed: %d", ret); + wiphy_err(priv->hw->wiphy, "CMD_SCAN failed: %d\n", ret); goto exit; } -- cgit v0.10.2 From 8048926bb898730b41c4c2698e9aefb16870488c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:48:57 -0700 Subject: USB: as102_usb_drv.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Mauro Carvalho Chehab CC: Sylwester Nawrocki CC: Piotr Chmura CC: Devin Heitmueller CC: Gianluca Gennari Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/media/as102/as102_usb_drv.c b/drivers/staging/media/as102/as102_usb_drv.c index 0f6bfe7..6875c88 100644 --- a/drivers/staging/media/as102/as102_usb_drv.c +++ b/drivers/staging/media/as102/as102_usb_drv.c @@ -375,7 +375,7 @@ static int as102_usb_probe(struct usb_interface *intf, as102_dev = kzalloc(sizeof(struct as102_dev_t), GFP_KERNEL); if (as102_dev == NULL) { - err("%s: kzalloc failed", __func__); + dev_err(&intf->dev, "%s: kzalloc failed\n", __func__); return -ENOMEM; } @@ -411,8 +411,9 @@ static int as102_usb_probe(struct usb_interface *intf, ret = usb_register_dev(intf, &as102_usb_class_driver); if (ret < 0) { /* something prevented us from registering this driver */ - err("%s: usb_register_dev() failed (errno = %d)", - __func__, ret); + dev_err(&intf->dev, + "%s: usb_register_dev() failed (errno = %d)\n", + __func__, ret); goto failed; } -- cgit v0.10.2 From af4e1ee04026908086d7ed252db2619a8ceaa333 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 14:55:16 -0700 Subject: USB: remove err() macro I thought this had been removed years ago. All in-kernel users of this call have now been cleaned up and converted over to use dev_err() instead, which is the correct thing to do. Now that there are no users, the macro can be removed so no one else accidentally starts to use it. Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/usb.h b/include/linux/usb.h index 22e9b32..45bc7a5 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1653,9 +1653,6 @@ do { \ } while (0) #endif -#define err(format, arg...) \ - printk(KERN_ERR KBUILD_MODNAME ": " format "\n", ##arg) - /* debugfs stuff */ extern struct dentry *usb_debug_root; -- cgit v0.10.2 From b08765749332c54c65c1a6515c01c6eb3fc1843e Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 25 Apr 2012 12:31:10 -0600 Subject: USB: ehci-tegra: remove PORT_RWC_BITS when setting USB_PORT_FEAT_ENABLE In the SetPortFeature/USB_PORT_FEAT_ENABLE case, ehci_hub_control() would read from status_reg, modify the value, and write the result back to status_reg. This would clear any bits in PORT_RWC_BITS that were set in the register. Fix this by masking these bits off before the write. This is logically the same change as 6d5f89c "USB: EHCI: remove PORT_RWC_BITS when clearing USB_PORT_FEAT_ENABLE", but applied to the Tegra driver rather than the USB core. Signed-off-by: Stephen Warren Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 43bb0a9..4c1eb61 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -164,7 +164,7 @@ static int tegra_ehci_hub_control( goto done; } - temp &= ~PORT_WKCONN_E; + temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E); temp |= PORT_WKDISC_E | PORT_WKOC_E; ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); -- cgit v0.10.2 From 0917ba847ac229029bcd494abd6a5a400bab3c51 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:39 -0700 Subject: USB: ci13xxx_udc.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 243ef1a..3ebc036 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -1686,7 +1686,7 @@ __acquires(udc->lock) trace("%p", udc); if (udc == NULL) { - err("EINVAL"); + pr_err("EINVAL\n"); return; } @@ -1709,7 +1709,7 @@ __acquires(udc->lock) done: if (retval) - err("error: %i", retval); + pr_err("error: %i\n", retval); } /** @@ -1724,7 +1724,7 @@ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) trace("%p, %p", ep, req); if (ep == NULL || req == NULL) { - err("EINVAL"); + pr_err("EINVAL\n"); return; } @@ -1907,7 +1907,7 @@ __acquires(udc->lock) trace("%p", udc); if (udc == NULL) { - err("EINVAL"); + pr_err("EINVAL\n"); return; } @@ -1929,7 +1929,8 @@ __acquires(udc->lock) "ERROR", err); spin_unlock(udc->lock); if (usb_ep_set_halt(&mEp->ep)) - err("error: ep_set_halt"); + dev_err(&udc->gadget.dev, + "error: ep_set_halt\n"); spin_lock(udc->lock); } } @@ -1940,7 +1941,8 @@ __acquires(udc->lock) continue; if (i != 0) { - warn("ctrl traffic received at endpoint"); + dev_warn(&udc->gadget.dev, + "ctrl traffic received at endpoint\n"); continue; } @@ -2079,7 +2081,8 @@ delegate: spin_unlock(udc->lock); if (usb_ep_set_halt(&mEp->ep)) - err("error: ep_set_halt"); + dev_err(&udc->gadget.dev, + "error: ep_set_halt\n"); spin_lock(udc->lock); } } @@ -2200,7 +2203,7 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) trace("%p, %i", ep, gfp_flags); if (ep == NULL) { - err("EINVAL"); + pr_err("EINVAL\n"); return NULL; } @@ -2236,10 +2239,10 @@ static void ep_free_request(struct usb_ep *ep, struct usb_request *req) trace("%p, %p", ep, req); if (ep == NULL || req == NULL) { - err("EINVAL"); + pr_err("EINVAL\n"); return; } else if (!list_empty(&mReq->queue)) { - err("EBUSY"); + pr_err("EBUSY\n"); return; } @@ -2288,7 +2291,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, /* first nuke then test link, e.g. previous status has not sent */ if (!list_empty(&mReq->queue)) { retval = -EBUSY; - err("request already in queue"); + pr_err("request already in queue\n"); goto done; } @@ -2444,7 +2447,7 @@ static void ep_fifo_flush(struct usb_ep *ep) trace("%p", ep); if (ep == NULL) { - err("%02X: -EINVAL", _usb_addr(mEp)); + pr_err("%02X: -EINVAL\n", _usb_addr(mEp)); return; } @@ -2777,7 +2780,7 @@ static irqreturn_t udc_irq(void) trace(); if (udc == NULL) { - err("ENODEV"); + pr_err("ENODEV\n"); return IRQ_HANDLED; } @@ -2849,7 +2852,7 @@ static void udc_release(struct device *dev) trace("%p", dev); if (dev == NULL) - err("EINVAL"); + pr_err("EINVAL\n"); } /** @@ -2951,7 +2954,7 @@ remove_trans: usb_put_transceiver(udc->transceiver); } - err("error = %i", retval); + dev_err(dev, "error = %i\n", retval); remove_dbg: #ifdef CONFIG_USB_GADGET_DEBUG_FILES dbg_remove_files(&udc->gadget.dev); @@ -2977,7 +2980,7 @@ static void udc_remove(void) struct ci13xxx *udc = _udc; if (udc == NULL) { - err("EINVAL"); + pr_err("EINVAL\n"); return; } usb_del_gadget_udc(&udc->gadget); -- cgit v0.10.2 From 2418d5f979fa424c401654f0f1e1d6abffecc379 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:39 -0700 Subject: USB: ohci-at91.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alan Stern CC: Grant Likely CC: Rob Herring Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 13ebeca..476fb4d 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -235,7 +235,8 @@ ohci_at91_start (struct usb_hcd *hcd) ohci->num_ports = board->ports; if ((ret = ohci_run(ohci)) < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } -- cgit v0.10.2 From bd0c092b728e6b7fc66e28637836ac07de93f421 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:40 -0700 Subject: USB: ohci-cns3xxx.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-cns3xxx.c b/drivers/usb/host/ohci-cns3xxx.c index 5a00a1e..2c9f233 100644 --- a/drivers/usb/host/ohci-cns3xxx.c +++ b/drivers/usb/host/ohci-cns3xxx.c @@ -41,7 +41,8 @@ cns3xxx_ohci_start(struct usb_hcd *hcd) ret = ohci_run(ohci); if (ret < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } -- cgit v0.10.2 From 8d6c85e4a43234fa3c2b728aec5b4f688b83b078 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:40 -0700 Subject: USB: ohci-ep93xx.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alan Stern CC: Lennert Buytenhek Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index 3d63574..cb108b3 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -116,7 +116,8 @@ static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd) return ret; if ((ret = ohci_run(ohci)) < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } -- cgit v0.10.2 From 5e415245b285542b3c5d993adbee49095039089e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:41 -0700 Subject: USB: ohci-exynos.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 37bb20e..2909621 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -35,7 +35,8 @@ static int ohci_exynos_start(struct usb_hcd *hcd) ret = ohci_run(ohci); if (ret < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } -- cgit v0.10.2 From b6c227edbb87630696c48e2510aa27c4ac0a3153 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:41 -0700 Subject: USB: ohci-nxp.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index 6618de1..d02abc3 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -379,7 +379,7 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name); if (usb_disabled()) { - err("USB is disabled"); + dev_err(&pdev->dev, "USB is disabled\n"); ret = -ENODEV; goto out; } @@ -387,7 +387,7 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) if (pdev->num_resources != 2 || pdev->resource[0].flags != IORESOURCE_MEM || pdev->resource[1].flags != IORESOURCE_IRQ) { - err("Invalid resource configuration"); + dev_err(&pdev->dev, "Invalid resource configuration\\nn"); ret = -ENODEV; goto out; } @@ -397,7 +397,7 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) ret = i2c_add_driver(&isp1301_driver); if (ret < 0) { - err("failed to add ISP1301 driver"); + dev_err(&pdev->dev, "failed to add ISP1301 driver\n"); goto out; } i2c_adap = i2c_get_adapter(2); @@ -407,7 +407,7 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) normal_i2c, NULL); i2c_put_adapter(i2c_adap); if (!isp1301_i2c_client) { - err("failed to connect I2C to ISP1301 USB Transceiver"); + dev_err(&pdev->dev, "failed to connect I2C to ISP1301 USB Transceiver\n"); ret = -ENODEV; goto out_i2c_driver; } @@ -417,20 +417,20 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) /* Enable USB PLL */ usb_clk = clk_get(&pdev->dev, "ck_pll5"); if (IS_ERR(usb_clk)) { - err("failed to acquire USB PLL"); + dev_err(&pdev->dev, "failed to acquire USB PLL\n"); ret = PTR_ERR(usb_clk); goto out1; } ret = clk_enable(usb_clk); if (ret < 0) { - err("failed to start USB PLL"); + dev_err(&pdev->dev, "failed to start USB PLL\n"); goto out2; } ret = clk_set_rate(usb_clk, 48000); if (ret < 0) { - err("failed to set USB clock rate"); + dev_err(&pdev->dev, "failed to set USB clock rate\n"); goto out3; } @@ -444,7 +444,7 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) hcd = usb_create_hcd (driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { - err("Failed to allocate HC buffer"); + dev_err(&pdev->dev, "Failed to allocate HC buffer\n"); ret = -ENOMEM; goto out3; } -- cgit v0.10.2 From 1d55b768c6f5c6a0461a31ae33c0b2bdb686562d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:42 -0700 Subject: USB: ohci-ppc-of.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alan Stern CC: Grant Likely CC: Rob Herring Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index b2b5767..e27d5ae 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -29,7 +29,8 @@ ohci_ppc_of_start(struct usb_hcd *hcd) return ret; if ((ret = ohci_run(ohci)) < 0) { - err("can't start %s", ohci_to_hcd(ohci)->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } -- cgit v0.10.2 From fc6d9ec564f18d83158732e8faebeb73e26a8274 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:42 -0700 Subject: USB: ohci-ppc-soc.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index 1514b70..185c39e 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -130,7 +130,8 @@ ohci_ppc_soc_start(struct usb_hcd *hcd) return ret; if ((ret = ohci_run(ohci)) < 0) { - err("can't start %s", ohci_to_hcd(ohci)->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } -- cgit v0.10.2 From 8ab60ea07d5dc2c8e9ba14bffd08db6243bf865f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:43 -0700 Subject: USB: ohci-ps3.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Geoff Levand CC: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index 6fd4fa1..2ee1d8d 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -45,7 +45,8 @@ static int __devinit ps3_ohci_hc_start(struct usb_hcd *hcd) result = ohci_run(ohci); if (result < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); } -- cgit v0.10.2 From 1041ac11981288a2e730c6f5d5383c596b366410 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:43 -0700 Subject: USB: ohci-s3c2410.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alan Stern CC: Ben Dooks CC: Kukjin Kim Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 56dcf06..664c869 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -420,7 +420,8 @@ ohci_s3c2410_start(struct usb_hcd *hcd) ret = ohci_run(ohci); if (ret < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } -- cgit v0.10.2 From f956c4da990e2f047d6477e2e325807309be613c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:44 -0700 Subject: USB: ohci-sh.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c index 84686d9..76a20c2 100644 --- a/drivers/usb/host/ohci-sh.c +++ b/drivers/usb/host/ohci-sh.c @@ -88,20 +88,20 @@ static int ohci_hcd_sh_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { - err("platform_get_resource error."); + dev_err(&pdev->dev, "platform_get_resource error.\n"); return -ENODEV; } irq = platform_get_irq(pdev, 0); if (irq < 0) { - err("platform_get_irq error."); + dev_err(&pdev->dev, "platform_get_irq error.\n"); return -ENODEV; } /* initialize hcd */ hcd = usb_create_hcd(&ohci_sh_hc_driver, &pdev->dev, (char *)hcd_name); if (!hcd) { - err("Failed to create hcd"); + dev_err(&pdev->dev, "Failed to create hcd\n"); return -ENOMEM; } @@ -110,7 +110,7 @@ static int ohci_hcd_sh_probe(struct platform_device *pdev) hcd->rsrc_len = resource_size(res); ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret != 0) { - err("Failed to add hcd"); + dev_err(&pdev->dev, "Failed to add hcd\n"); usb_put_hcd(hcd); return ret; } -- cgit v0.10.2 From 3b8ca26fcc433cb41531660a30b6b86b79806da5 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:44 -0700 Subject: USB: ohci-tmio.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c index 120bfe6..60c2b07 100644 --- a/drivers/usb/host/ohci-tmio.c +++ b/drivers/usb/host/ohci-tmio.c @@ -140,7 +140,8 @@ static int ohci_tmio_start(struct usb_hcd *hcd) return ret; if ((ret = ohci_run(ohci)) < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } -- cgit v0.10.2 From d57b177208b6ec20cacd7321ee32ef02f9f9e7fa Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:45 -0700 Subject: USB: ohci-xls.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c index a224786..41e378f 100644 --- a/drivers/usb/host/ohci-xls.c +++ b/drivers/usb/host/ohci-xls.c @@ -88,7 +88,8 @@ static int __devinit ohci_xls_start(struct usb_hcd *hcd) ohci = hcd_to_ohci(hcd); ret = ohci_run(ohci); if (ret < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } -- cgit v0.10.2 From 4212cd74ca6f0c42f5a0065797dd1c310a485ad8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 27 Apr 2012 11:24:45 -0700 Subject: USB: usb-skeleton.c: remove err() usage err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index b4a7167..0616f23 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -93,8 +93,8 @@ static int skel_open(struct inode *inode, struct file *file) interface = usb_find_interface(&skel_driver, subminor); if (!interface) { - err("%s - error, can't find device for minor %d", - __func__, subminor); + pr_err("%s - error, can't find device for minor %d\n", + __func__, subminor); retval = -ENODEV; goto exit; } @@ -179,8 +179,9 @@ static void skel_read_bulk_callback(struct urb *urb) if (!(urb->status == -ENOENT || urb->status == -ECONNRESET || urb->status == -ESHUTDOWN)) - err("%s - nonzero write bulk status received: %d", - __func__, urb->status); + dev_err(&dev->interface->dev, + "%s - nonzero write bulk status received: %d\n", + __func__, urb->status); dev->errors = urb->status; } else { @@ -213,7 +214,8 @@ static int skel_do_read_io(struct usb_skel *dev, size_t count) /* do it */ rv = usb_submit_urb(dev->bulk_in_urb, GFP_KERNEL); if (rv < 0) { - err("%s - failed submitting read urb, error %d", + dev_err(&dev->interface->dev, + "%s - failed submitting read urb, error %d\n", __func__, rv); dev->bulk_in_filled = 0; rv = (rv == -ENOMEM) ? rv : -EIO; @@ -364,8 +366,9 @@ static void skel_write_bulk_callback(struct urb *urb) if (!(urb->status == -ENOENT || urb->status == -ECONNRESET || urb->status == -ESHUTDOWN)) - err("%s - nonzero write bulk status received: %d", - __func__, urb->status); + dev_err(&dev->interface->dev, + "%s - nonzero write bulk status received: %d\n", + __func__, urb->status); spin_lock(&dev->err_lock); dev->errors = urb->status; @@ -459,8 +462,9 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, retval = usb_submit_urb(urb, GFP_KERNEL); mutex_unlock(&dev->io_mutex); if (retval) { - err("%s - failed submitting write urb, error %d", __func__, - retval); + dev_err(&dev->interface->dev, + "%s - failed submitting write urb, error %d\n", + __func__, retval); goto error_unanchor; } @@ -519,7 +523,7 @@ static int skel_probe(struct usb_interface *interface, /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) { - err("Out of memory"); + dev_err(&interface->dev, "Out of memory\n"); goto error; } kref_init(&dev->kref); @@ -546,12 +550,14 @@ static int skel_probe(struct usb_interface *interface, dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!dev->bulk_in_buffer) { - err("Could not allocate bulk_in_buffer"); + dev_err(&interface->dev, + "Could not allocate bulk_in_buffer\n"); goto error; } dev->bulk_in_urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->bulk_in_urb) { - err("Could not allocate bulk_in_urb"); + dev_err(&interface->dev, + "Could not allocate bulk_in_urb\n"); goto error; } } @@ -563,7 +569,8 @@ static int skel_probe(struct usb_interface *interface, } } if (!(dev->bulk_in_endpointAddr && dev->bulk_out_endpointAddr)) { - err("Could not find both bulk-in and bulk-out endpoints"); + dev_err(&interface->dev, + "Could not find both bulk-in and bulk-out endpoints\n"); goto error; } @@ -574,7 +581,8 @@ static int skel_probe(struct usb_interface *interface, retval = usb_register_dev(interface, &skel_class); if (retval) { /* something prevented us from registering this driver */ - err("Not able to get a minor for this device."); + dev_err(&interface->dev, + "Not able to get a minor for this device.\n"); usb_set_intfdata(interface, NULL); goto error; } -- cgit v0.10.2 From 24a85bae5da2b43fed423859c09c5a81ab359473 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 27 Apr 2012 14:23:54 +0200 Subject: USB: cdc-wdm: sanitize error returns wdm_flush() returns unsanitized USB error codes. They must be cleaned up to before being anded to user space Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index c6f6560..b29a981 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -531,7 +531,7 @@ static int wdm_flush(struct file *file, fl_owner_t id) dev_err(&desc->intf->dev, "Error in flush path: %d\n", desc->werr); - return desc->werr; + return usb_translate_errors(desc->werr); } static unsigned int wdm_poll(struct file *file, struct poll_table_struct *wait) -- cgit v0.10.2 From 2f338c8a1904e2e7aa5a8bd12fb0cf2422d17da4 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 27 Apr 2012 14:36:37 +0200 Subject: USB: cdc-wdm: fix memory leak cleanup() is not called if the last close() comes after disconnect(). That leads to a memory leak. Rectified by checking for an earlier disconnect() in release() Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index b29a981..650e1da 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -622,6 +622,8 @@ static int wdm_release(struct inode *inode, struct file *file) kill_urbs(desc); if (!test_bit(WDM_DISCONNECTING, &desc->flags)) desc->manage_power(desc->intf, 0); + else + cleanup(desc); } mutex_unlock(&wdm_mutex); return 0; -- cgit v0.10.2 From 70f3c7586c708bce8f525246c8b27322edc00cc7 Mon Sep 17 00:00:00 2001 From: Ben Minerds Date: Sat, 28 Apr 2012 13:36:35 +1000 Subject: USB: serial: belkin_sa: Changes to conform with coding style Removed some spaces before tabs and reformatted switch statement. Signed-off-by: Ben Minerds Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index a52e0d2..35b0d3d 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -2,17 +2,17 @@ * Belkin USB Serial Adapter Driver * * Copyright (C) 2000 William Greathouse (wgreathouse@smva.com) - * Copyright (C) 2000-2001 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2000-2001 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com) * * This program is largely derived from work by the linux-usb group * and associated source files. Please see the usb/serial files for * individual credits and copyrights. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * * See Documentation/usb/usb-serial.txt for more information on using this * driver @@ -403,7 +403,8 @@ static void belkin_sa_set_termios(struct tty_struct *tty, case CS8: urb_value = BELKIN_SA_DATA_BITS(8); break; - default: dbg("CSIZE was not CS5-CS8, using default of 8"); + default: + dbg("CSIZE was not CS5-CS8, using default of 8"); urb_value = BELKIN_SA_DATA_BITS(8); break; } -- cgit v0.10.2 From fb28d58b72aa9215b26f1d5478462af394a4d253 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 17:15:29 -0700 Subject: USB: remove CONFIG_USB_DEVICEFS This option has been deprecated for many years now, and no userspace tools use it anymore, so it should be safe to finally remove it. Reported-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/media/go7007/go7007.txt b/drivers/staging/media/go7007/go7007.txt index 9db1f39..fcb3e23 100644 --- a/drivers/staging/media/go7007/go7007.txt +++ b/drivers/staging/media/go7007/go7007.txt @@ -87,7 +87,6 @@ kernel as built-in or modules: CONFIG_SOUND - Sound card support CONFIG_SND - Advanced Linux Sound Architecture CONFIG_USB - Support for Host-side USB - CONFIG_USB_DEVICEFS - USB device filesystem CONFIG_USB_EHCI_HCD - EHCI HCD (USB 2.0) support Additionally, to use the example application, the following options need to diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 18d02e3..751031e 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -27,35 +27,6 @@ config USB_ANNOUNCE_NEW_DEVICES comment "Miscellaneous USB options" depends on USB -config USB_DEVICEFS - bool "USB device filesystem (DEPRECATED)" - depends on USB - ---help--- - If you say Y here (and to "/proc file system support" in the "File - systems" section, above), you will get a file /proc/bus/usb/devices - which lists the devices currently connected to your USB bus or - busses, and for every connected device a file named - "/proc/bus/usb/xxx/yyy", where xxx is the bus number and yyy the - device number; the latter files can be used by user space programs - to talk directly to the device. These files are "virtual", meaning - they are generated on the fly and not stored on the hard drive. - - You may need to mount the usbfs file system to see the files, use - mount -t usbfs none /proc/bus/usb - - For the format of the various /proc/bus/usb/ files, please read - . - - Modern Linux systems do not use this. - - Usbfs entries are files and not character devices; usbfs can't - handle Access Control Lists (ACL) which are the default way to - grant access to USB devices for untrusted users of a desktop - system. - - The usbfs functionality is replaced by real device-nodes managed by - udev. These nodes lived in /dev/bus/usb and are used by libusb. - config USB_DEVICE_CLASS bool "USB device class-devices (DEPRECATED)" depends on USB diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index 507a4e1..c4ea846 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -9,6 +9,5 @@ usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o usbcore-y += devio.o notify.o generic.o quirks.o devices.o usbcore-$(CONFIG_PCI) += hcd-pci.o -usbcore-$(CONFIG_USB_DEVICEFS) += inode.o obj-$(CONFIG_USB) += usbcore.o diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 8df4b76..90db6e2 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -727,17 +727,6 @@ static int usbdev_open(struct inode *inode, struct file *file) if (imajor(inode) == USB_DEVICE_MAJOR) dev = usbdev_lookup_by_devt(inode->i_rdev); -#ifdef CONFIG_USB_DEVICEFS - /* procfs file */ - if (!dev) { - dev = inode->i_private; - if (dev && dev->usbfs_dentry && - dev->usbfs_dentry->d_inode == inode) - usb_get_dev(dev); - else - dev = NULL; - } -#endif mutex_unlock(&usbfs_mutex); if (!dev) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 9a56635..112a7ae 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -726,16 +726,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env) return -ENODEV; } -#ifdef CONFIG_USB_DEVICEFS - /* If this is available, userspace programs can directly read - * all the device descriptors we don't tell them about. Or - * act as usermode drivers. - */ - if (add_uevent_var(env, "DEVICE=/proc/bus/usb/%03d/%03d", - usb_dev->bus->busnum, usb_dev->devnum)) - return -ENOMEM; -#endif - /* per-device configurations are common */ if (add_uevent_var(env, "PRODUCT=%x/%x/%x", le16_to_cpu(usb_dev->descriptor.idVendor), @@ -788,15 +778,13 @@ int usb_register_device_driver(struct usb_device_driver *new_udriver, retval = driver_register(&new_udriver->drvwrap.driver); - if (!retval) { + if (!retval) pr_info("%s: registered new device driver %s\n", usbcore_name, new_udriver->name); - usbfs_update_special(); - } else { + else printk(KERN_ERR "%s: error %d registering device " " driver %s\n", usbcore_name, retval, new_udriver->name); - } return retval; } @@ -815,7 +803,6 @@ void usb_deregister_device_driver(struct usb_device_driver *udriver) usbcore_name, udriver->name); driver_unregister(&udriver->drvwrap.driver); - usbfs_update_special(); } EXPORT_SYMBOL_GPL(usb_deregister_device_driver); @@ -856,8 +843,6 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner, if (retval) goto out; - usbfs_update_special(); - retval = usb_create_newid_files(new_driver); if (retval) goto out_newid; @@ -897,8 +882,6 @@ void usb_deregister(struct usb_driver *driver) usb_remove_newid_files(driver); driver_unregister(&driver->drvwrap.driver); usb_free_dynids(driver); - - usbfs_update_special(); } EXPORT_SYMBOL_GPL(usb_deregister); diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c deleted file mode 100644 index d2b9af5..0000000 --- a/drivers/usb/core/inode.c +++ /dev/null @@ -1,748 +0,0 @@ -/*****************************************************************************/ - -/* - * inode.c -- Inode/Dentry functions for the USB device file system. - * - * Copyright (C) 2000 Thomas Sailer (sailer@ife.ee.ethz.ch) - * Copyright (C) 2001,2002,2004 Greg Kroah-Hartman (greg@kroah.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * History: - * 0.1 04.01.2000 Created - * 0.2 10.12.2001 converted to use the vfs layer better - */ - -/*****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "usb.h" - -#define USBFS_DEFAULT_DEVMODE (S_IWUSR | S_IRUGO) -#define USBFS_DEFAULT_BUSMODE (S_IXUGO | S_IRUGO) -#define USBFS_DEFAULT_LISTMODE S_IRUGO - -static const struct file_operations default_file_operations; -static struct vfsmount *usbfs_mount; -static int usbfs_mount_count; /* = 0 */ - -static struct dentry *devices_usbfs_dentry; -static int num_buses; /* = 0 */ - -static uid_t devuid; /* = 0 */ -static uid_t busuid; /* = 0 */ -static uid_t listuid; /* = 0 */ -static gid_t devgid; /* = 0 */ -static gid_t busgid; /* = 0 */ -static gid_t listgid; /* = 0 */ -static umode_t devmode = USBFS_DEFAULT_DEVMODE; -static umode_t busmode = USBFS_DEFAULT_BUSMODE; -static umode_t listmode = USBFS_DEFAULT_LISTMODE; - -static int usbfs_show_options(struct seq_file *seq, struct dentry *root) -{ - if (devuid != 0) - seq_printf(seq, ",devuid=%u", devuid); - if (devgid != 0) - seq_printf(seq, ",devgid=%u", devgid); - if (devmode != USBFS_DEFAULT_DEVMODE) - seq_printf(seq, ",devmode=%o", devmode); - if (busuid != 0) - seq_printf(seq, ",busuid=%u", busuid); - if (busgid != 0) - seq_printf(seq, ",busgid=%u", busgid); - if (busmode != USBFS_DEFAULT_BUSMODE) - seq_printf(seq, ",busmode=%o", busmode); - if (listuid != 0) - seq_printf(seq, ",listuid=%u", listuid); - if (listgid != 0) - seq_printf(seq, ",listgid=%u", listgid); - if (listmode != USBFS_DEFAULT_LISTMODE) - seq_printf(seq, ",listmode=%o", listmode); - - return 0; -} - -enum { - Opt_devuid, Opt_devgid, Opt_devmode, - Opt_busuid, Opt_busgid, Opt_busmode, - Opt_listuid, Opt_listgid, Opt_listmode, - Opt_err, -}; - -static const match_table_t tokens = { - {Opt_devuid, "devuid=%u"}, - {Opt_devgid, "devgid=%u"}, - {Opt_devmode, "devmode=%o"}, - {Opt_busuid, "busuid=%u"}, - {Opt_busgid, "busgid=%u"}, - {Opt_busmode, "busmode=%o"}, - {Opt_listuid, "listuid=%u"}, - {Opt_listgid, "listgid=%u"}, - {Opt_listmode, "listmode=%o"}, - {Opt_err, NULL} -}; - -static int parse_options(struct super_block *s, char *data) -{ - char *p; - int option; - - /* (re)set to defaults. */ - devuid = 0; - busuid = 0; - listuid = 0; - devgid = 0; - busgid = 0; - listgid = 0; - devmode = USBFS_DEFAULT_DEVMODE; - busmode = USBFS_DEFAULT_BUSMODE; - listmode = USBFS_DEFAULT_LISTMODE; - - while ((p = strsep(&data, ",")) != NULL) { - substring_t args[MAX_OPT_ARGS]; - int token; - if (!*p) - continue; - - token = match_token(p, tokens, args); - switch (token) { - case Opt_devuid: - if (match_int(&args[0], &option)) - return -EINVAL; - devuid = option; - break; - case Opt_devgid: - if (match_int(&args[0], &option)) - return -EINVAL; - devgid = option; - break; - case Opt_devmode: - if (match_octal(&args[0], &option)) - return -EINVAL; - devmode = option & S_IRWXUGO; - break; - case Opt_busuid: - if (match_int(&args[0], &option)) - return -EINVAL; - busuid = option; - break; - case Opt_busgid: - if (match_int(&args[0], &option)) - return -EINVAL; - busgid = option; - break; - case Opt_busmode: - if (match_octal(&args[0], &option)) - return -EINVAL; - busmode = option & S_IRWXUGO; - break; - case Opt_listuid: - if (match_int(&args[0], &option)) - return -EINVAL; - listuid = option; - break; - case Opt_listgid: - if (match_int(&args[0], &option)) - return -EINVAL; - listgid = option; - break; - case Opt_listmode: - if (match_octal(&args[0], &option)) - return -EINVAL; - listmode = option & S_IRWXUGO; - break; - default: - printk(KERN_ERR "usbfs: unrecognised mount option " - "\"%s\" or missing value\n", p); - return -EINVAL; - } - } - - return 0; -} - -static void update_special(struct dentry *special) -{ - special->d_inode->i_uid = listuid; - special->d_inode->i_gid = listgid; - special->d_inode->i_mode = S_IFREG | listmode; -} - -static void update_dev(struct dentry *dev) -{ - dev->d_inode->i_uid = devuid; - dev->d_inode->i_gid = devgid; - dev->d_inode->i_mode = S_IFREG | devmode; -} - -static void update_bus(struct dentry *bus) -{ - struct dentry *dev = NULL; - - bus->d_inode->i_uid = busuid; - bus->d_inode->i_gid = busgid; - bus->d_inode->i_mode = S_IFDIR | busmode; - - mutex_lock(&bus->d_inode->i_mutex); - - list_for_each_entry(dev, &bus->d_subdirs, d_u.d_child) - if (dev->d_inode) - update_dev(dev); - - mutex_unlock(&bus->d_inode->i_mutex); -} - -static void update_sb(struct super_block *sb) -{ - struct dentry *root = sb->s_root; - struct dentry *bus = NULL; - - if (!root) - return; - - mutex_lock_nested(&root->d_inode->i_mutex, I_MUTEX_PARENT); - - list_for_each_entry(bus, &root->d_subdirs, d_u.d_child) { - if (bus->d_inode) { - switch (S_IFMT & bus->d_inode->i_mode) { - case S_IFDIR: - update_bus(bus); - break; - case S_IFREG: - update_special(bus); - break; - default: - printk(KERN_WARNING "usbfs: Unknown node %s " - "mode %x found on remount!\n", - bus->d_name.name, bus->d_inode->i_mode); - break; - } - } - } - - mutex_unlock(&root->d_inode->i_mutex); -} - -static int remount(struct super_block *sb, int *flags, char *data) -{ - /* If this is not a real mount, - * i.e. it's a simple_pin_fs from create_special_files, - * then ignore it. - */ - if (*flags & MS_KERNMOUNT) - return 0; - - if (parse_options(sb, data)) { - printk(KERN_WARNING "usbfs: mount parameter error.\n"); - return -EINVAL; - } - - if (usbfs_mount) - update_sb(usbfs_mount->mnt_sb); - - return 0; -} - -static struct inode *usbfs_get_inode (struct super_block *sb, umode_t mode, dev_t dev) -{ - struct inode *inode = new_inode(sb); - - if (inode) { - inode->i_ino = get_next_ino(); - inode_init_owner(inode, NULL, mode); - inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME; - switch (mode & S_IFMT) { - default: - init_special_inode(inode, mode, dev); - break; - case S_IFREG: - inode->i_fop = &default_file_operations; - break; - case S_IFDIR: - inode->i_op = &simple_dir_inode_operations; - inode->i_fop = &simple_dir_operations; - - /* directory inodes start off with i_nlink == 2 (for "." entry) */ - inc_nlink(inode); - break; - } - } - return inode; -} - -/* SMP-safe */ -static int usbfs_mknod (struct inode *dir, struct dentry *dentry, umode_t mode, - dev_t dev) -{ - struct inode *inode = usbfs_get_inode(dir->i_sb, mode, dev); - int error = -EPERM; - - if (dentry->d_inode) - return -EEXIST; - - if (inode) { - d_instantiate(dentry, inode); - dget(dentry); - error = 0; - } - return error; -} - -static int usbfs_mkdir (struct inode *dir, struct dentry *dentry, umode_t mode) -{ - int res; - - mode = (mode & (S_IRWXUGO | S_ISVTX)) | S_IFDIR; - res = usbfs_mknod (dir, dentry, mode, 0); - if (!res) - inc_nlink(dir); - return res; -} - -static int usbfs_create (struct inode *dir, struct dentry *dentry, umode_t mode) -{ - mode = (mode & S_IALLUGO) | S_IFREG; - return usbfs_mknod (dir, dentry, mode, 0); -} - -static inline int usbfs_positive (struct dentry *dentry) -{ - return dentry->d_inode && !d_unhashed(dentry); -} - -static int usbfs_empty (struct dentry *dentry) -{ - struct list_head *list; - - spin_lock(&dentry->d_lock); - list_for_each(list, &dentry->d_subdirs) { - struct dentry *de = list_entry(list, struct dentry, d_u.d_child); - - spin_lock_nested(&de->d_lock, DENTRY_D_LOCK_NESTED); - if (usbfs_positive(de)) { - spin_unlock(&de->d_lock); - spin_unlock(&dentry->d_lock); - return 0; - } - spin_unlock(&de->d_lock); - } - spin_unlock(&dentry->d_lock); - return 1; -} - -static int usbfs_unlink (struct inode *dir, struct dentry *dentry) -{ - struct inode *inode = dentry->d_inode; - mutex_lock(&inode->i_mutex); - drop_nlink(dentry->d_inode); - dput(dentry); - mutex_unlock(&inode->i_mutex); - d_delete(dentry); - return 0; -} - -static int usbfs_rmdir(struct inode *dir, struct dentry *dentry) -{ - int error = -ENOTEMPTY; - struct inode * inode = dentry->d_inode; - - mutex_lock(&inode->i_mutex); - dentry_unhash(dentry); - if (usbfs_empty(dentry)) { - dont_mount(dentry); - drop_nlink(dentry->d_inode); - drop_nlink(dentry->d_inode); - dput(dentry); - inode->i_flags |= S_DEAD; - drop_nlink(dir); - error = 0; - } - mutex_unlock(&inode->i_mutex); - if (!error) - d_delete(dentry); - return error; -} - - -/* default file operations */ -static ssize_t default_read_file (struct file *file, char __user *buf, - size_t count, loff_t *ppos) -{ - return 0; -} - -static ssize_t default_write_file (struct file *file, const char __user *buf, - size_t count, loff_t *ppos) -{ - return count; -} - -static loff_t default_file_lseek (struct file *file, loff_t offset, int orig) -{ - loff_t retval = -EINVAL; - - mutex_lock(&file->f_path.dentry->d_inode->i_mutex); - switch(orig) { - case 0: - if (offset > 0) { - file->f_pos = offset; - retval = file->f_pos; - } - break; - case 1: - if ((offset + file->f_pos) > 0) { - file->f_pos += offset; - retval = file->f_pos; - } - break; - default: - break; - } - mutex_unlock(&file->f_path.dentry->d_inode->i_mutex); - return retval; -} - -static const struct file_operations default_file_operations = { - .read = default_read_file, - .write = default_write_file, - .open = simple_open, - .llseek = default_file_lseek, -}; - -static const struct super_operations usbfs_ops = { - .statfs = simple_statfs, - .drop_inode = generic_delete_inode, - .remount_fs = remount, - .show_options = usbfs_show_options, -}; - -static int usbfs_fill_super(struct super_block *sb, void *data, int silent) -{ - struct inode *inode; - - sb->s_blocksize = PAGE_CACHE_SIZE; - sb->s_blocksize_bits = PAGE_CACHE_SHIFT; - sb->s_magic = USBDEVICE_SUPER_MAGIC; - sb->s_op = &usbfs_ops; - sb->s_time_gran = 1; - inode = usbfs_get_inode(sb, S_IFDIR | 0755, 0); - sb->s_root = d_make_root(inode); - if (!sb->s_root) { - dbg("%s: could not get root dentry!",__func__); - return -ENOMEM; - } - return 0; -} - -/* - * fs_create_by_name - create a file, given a name - * @name: name of file - * @mode: type of file - * @parent: dentry of directory to create it in - * @dentry: resulting dentry of file - * - * This function handles both regular files and directories. - */ -static int fs_create_by_name (const char *name, umode_t mode, - struct dentry *parent, struct dentry **dentry) -{ - int error = 0; - - /* If the parent is not specified, we create it in the root. - * We need the root dentry to do this, which is in the super - * block. A pointer to that is in the struct vfsmount that we - * have around. - */ - if (!parent ) { - if (usbfs_mount) - parent = usbfs_mount->mnt_root; - } - - if (!parent) { - dbg("Ah! can not find a parent!"); - return -EFAULT; - } - - *dentry = NULL; - mutex_lock(&parent->d_inode->i_mutex); - *dentry = lookup_one_len(name, parent, strlen(name)); - if (!IS_ERR(*dentry)) { - if (S_ISDIR(mode)) - error = usbfs_mkdir (parent->d_inode, *dentry, mode); - else - error = usbfs_create (parent->d_inode, *dentry, mode); - } else - error = PTR_ERR(*dentry); - mutex_unlock(&parent->d_inode->i_mutex); - - return error; -} - -static struct dentry *fs_create_file (const char *name, umode_t mode, - struct dentry *parent, void *data, - const struct file_operations *fops, - uid_t uid, gid_t gid) -{ - struct dentry *dentry; - int error; - - dbg("creating file '%s'",name); - - error = fs_create_by_name (name, mode, parent, &dentry); - if (error) { - dentry = NULL; - } else { - if (dentry->d_inode) { - if (data) - dentry->d_inode->i_private = data; - if (fops) - dentry->d_inode->i_fop = fops; - dentry->d_inode->i_uid = uid; - dentry->d_inode->i_gid = gid; - } - } - - return dentry; -} - -static void fs_remove_file (struct dentry *dentry) -{ - struct dentry *parent = dentry->d_parent; - - if (!parent || !parent->d_inode) - return; - - mutex_lock_nested(&parent->d_inode->i_mutex, I_MUTEX_PARENT); - if (usbfs_positive(dentry)) { - if (dentry->d_inode) { - if (S_ISDIR(dentry->d_inode->i_mode)) - usbfs_rmdir(parent->d_inode, dentry); - else - usbfs_unlink(parent->d_inode, dentry); - dput(dentry); - } - } - mutex_unlock(&parent->d_inode->i_mutex); -} - -/* --------------------------------------------------------------------- */ - -static struct dentry *usb_mount(struct file_system_type *fs_type, - int flags, const char *dev_name, void *data) -{ - return mount_single(fs_type, flags, data, usbfs_fill_super); -} - -static struct file_system_type usb_fs_type = { - .owner = THIS_MODULE, - .name = "usbfs", - .mount = usb_mount, - .kill_sb = kill_litter_super, -}; - -/* --------------------------------------------------------------------- */ - -static int create_special_files (void) -{ - struct dentry *parent; - int retval; - - /* create the devices special file */ - retval = simple_pin_fs(&usb_fs_type, &usbfs_mount, &usbfs_mount_count); - if (retval) { - printk(KERN_ERR "Unable to get usbfs mount\n"); - goto exit; - } - - parent = usbfs_mount->mnt_root; - devices_usbfs_dentry = fs_create_file ("devices", - listmode | S_IFREG, parent, - NULL, &usbfs_devices_fops, - listuid, listgid); - if (devices_usbfs_dentry == NULL) { - printk(KERN_ERR "Unable to create devices usbfs file\n"); - retval = -ENODEV; - goto error_clean_mounts; - } - - goto exit; - -error_clean_mounts: - simple_release_fs(&usbfs_mount, &usbfs_mount_count); -exit: - return retval; -} - -static void remove_special_files (void) -{ - if (devices_usbfs_dentry) - fs_remove_file (devices_usbfs_dentry); - devices_usbfs_dentry = NULL; - simple_release_fs(&usbfs_mount, &usbfs_mount_count); -} - -void usbfs_update_special (void) -{ - struct inode *inode; - - if (devices_usbfs_dentry) { - inode = devices_usbfs_dentry->d_inode; - if (inode) - inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME; - } -} - -static void usbfs_add_bus(struct usb_bus *bus) -{ - struct dentry *parent; - char name[8]; - int retval; - - /* create the special files if this is the first bus added */ - if (num_buses == 0) { - retval = create_special_files(); - if (retval) - return; - } - ++num_buses; - - sprintf (name, "%03d", bus->busnum); - - parent = usbfs_mount->mnt_root; - bus->usbfs_dentry = fs_create_file (name, busmode | S_IFDIR, parent, - bus, NULL, busuid, busgid); - if (bus->usbfs_dentry == NULL) { - printk(KERN_ERR "Error creating usbfs bus entry\n"); - return; - } -} - -static void usbfs_remove_bus(struct usb_bus *bus) -{ - if (bus->usbfs_dentry) { - fs_remove_file (bus->usbfs_dentry); - bus->usbfs_dentry = NULL; - } - - --num_buses; - if (num_buses <= 0) { - remove_special_files(); - num_buses = 0; - } -} - -static void usbfs_add_device(struct usb_device *dev) -{ - char name[8]; - int i; - int i_size; - - sprintf (name, "%03d", dev->devnum); - dev->usbfs_dentry = fs_create_file (name, devmode | S_IFREG, - dev->bus->usbfs_dentry, dev, - &usbdev_file_operations, - devuid, devgid); - if (dev->usbfs_dentry == NULL) { - printk(KERN_ERR "Error creating usbfs device entry\n"); - return; - } - - /* Set the size of the device's file to be - * equal to the size of the device descriptors. */ - i_size = sizeof (struct usb_device_descriptor); - for (i = 0; i < dev->descriptor.bNumConfigurations; ++i) { - struct usb_config_descriptor *config = - (struct usb_config_descriptor *)dev->rawdescriptors[i]; - i_size += le16_to_cpu(config->wTotalLength); - } - if (dev->usbfs_dentry->d_inode) - dev->usbfs_dentry->d_inode->i_size = i_size; -} - -static void usbfs_remove_device(struct usb_device *dev) -{ - if (dev->usbfs_dentry) { - fs_remove_file (dev->usbfs_dentry); - dev->usbfs_dentry = NULL; - } -} - -static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev) -{ - switch (action) { - case USB_DEVICE_ADD: - usbfs_add_device(dev); - break; - case USB_DEVICE_REMOVE: - usbfs_remove_device(dev); - break; - case USB_BUS_ADD: - usbfs_add_bus(dev); - break; - case USB_BUS_REMOVE: - usbfs_remove_bus(dev); - } - - usbfs_update_special(); - usbfs_conn_disc_event(); - return NOTIFY_OK; -} - -static struct notifier_block usbfs_nb = { - .notifier_call = usbfs_notify, -}; - -/* --------------------------------------------------------------------- */ - -static struct proc_dir_entry *usbdir = NULL; - -int __init usbfs_init(void) -{ - int retval; - - retval = register_filesystem(&usb_fs_type); - if (retval) - return retval; - - usb_register_notify(&usbfs_nb); - - /* create mount point for usbfs */ - usbdir = proc_mkdir("bus/usb", NULL); - - return 0; -} - -void usbfs_cleanup(void) -{ - usb_unregister_notify(&usbfs_nb); - unregister_filesystem(&usb_fs_type); - if (usbdir) - remove_proc_entry("bus/usb", NULL); -} - diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index c74ba7b..0ce862b 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1030,9 +1030,6 @@ static int __init usb_init(void) retval = usb_devio_init(); if (retval) goto usb_devio_init_failed; - retval = usbfs_init(); - if (retval) - goto fs_init_failed; retval = usb_hub_init(); if (retval) goto hub_init_failed; @@ -1042,8 +1039,6 @@ static int __init usb_init(void) usb_hub_cleanup(); hub_init_failed: - usbfs_cleanup(); -fs_init_failed: usb_devio_cleanup(); usb_devio_init_failed: usb_deregister(&usbfs_driver); @@ -1070,7 +1065,6 @@ static void __exit usb_exit(void) usb_deregister_device_driver(&usb_generic_driver); usb_major_cleanup(); - usbfs_cleanup(); usb_deregister(&usbfs_driver); usb_devio_cleanup(); usb_hub_cleanup(); diff --git a/include/linux/usb.h b/include/linux/usb.h index 45bc7a5..a63c5ba 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -351,10 +351,6 @@ struct usb_bus { int bandwidth_int_reqs; /* number of Interrupt requests */ int bandwidth_isoc_reqs; /* number of Isoc. requests */ -#ifdef CONFIG_USB_DEVICEFS - struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */ -#endif - #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) struct mon_bus *mon_bus; /* non-null when associated */ int monitored; /* non-zero when monitored */ @@ -496,9 +492,6 @@ struct usb_device { #ifdef CONFIG_USB_DEVICE_CLASS struct device *usb_classdev; #endif -#ifdef CONFIG_USB_DEVICEFS - struct dentry *usbfs_dentry; -#endif int maxchild; struct usb_device **children; diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 5de4157..159a08a 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -582,29 +582,6 @@ static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) } #endif /* CONFIG_USB_SUSPEND */ - -/* - * USB device fs stuff - */ - -#ifdef CONFIG_USB_DEVICEFS - -/* - * these are expected to be called from the USB core/hub thread - * with the kernel lock held - */ -extern void usbfs_update_special(void); -extern int usbfs_init(void); -extern void usbfs_cleanup(void); - -#else /* CONFIG_USB_DEVICEFS */ - -static inline void usbfs_update_special(void) {} -static inline int usbfs_init(void) { return 0; } -static inline void usbfs_cleanup(void) { } - -#endif /* CONFIG_USB_DEVICEFS */ - /*-------------------------------------------------------------------------*/ #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) -- cgit v0.10.2 From 007bab91324e6337bb150ffc17b20cf829686370 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 25 Apr 2012 15:26:54 -0700 Subject: USB: remove CONFIG_USB_DEVICE_CLASS This option has been deprecated for many years now, and no userspace tools use it anymore, so it should be safe to finally remove it. Reported-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 751031e..fe46fc0 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -27,29 +27,6 @@ config USB_ANNOUNCE_NEW_DEVICES comment "Miscellaneous USB options" depends on USB -config USB_DEVICE_CLASS - bool "USB device class-devices (DEPRECATED)" - depends on USB - default y - ---help--- - Userspace access to USB devices is granted by device-nodes exported - directly from the usbdev in sysfs. Old versions of the driver - core and udev needed additional class devices to export device nodes. - - These additional devices are difficult to handle in userspace, if - information about USB interfaces must be available. One device - contains the device node, the other device contains the interface - data. Both devices are at the same level in sysfs (siblings) and one - can't access the other. The device node created directly by the - usb device is the parent device of the interface and therefore - easily accessible from the interface event. - - This option provides backward compatibility for libusb device - nodes (lsusb) when usbfs is not used, and the following udev rule - doesn't exist: - SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \ - NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644" - config USB_DYNAMIC_MINORS bool "Dynamic USB minor allocation" depends on USB diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 90db6e2..c4a1af8 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -2051,44 +2051,13 @@ static void usbdev_remove(struct usb_device *udev) } } -#ifdef CONFIG_USB_DEVICE_CLASS -static struct class *usb_classdev_class; - -static int usb_classdev_add(struct usb_device *dev) -{ - struct device *cldev; - - cldev = device_create(usb_classdev_class, &dev->dev, dev->dev.devt, - NULL, "usbdev%d.%d", dev->bus->busnum, - dev->devnum); - if (IS_ERR(cldev)) - return PTR_ERR(cldev); - dev->usb_classdev = cldev; - return 0; -} - -static void usb_classdev_remove(struct usb_device *dev) -{ - if (dev->usb_classdev) - device_unregister(dev->usb_classdev); -} - -#else -#define usb_classdev_add(dev) 0 -#define usb_classdev_remove(dev) do {} while (0) - -#endif - static int usbdev_notify(struct notifier_block *self, unsigned long action, void *dev) { switch (action) { case USB_DEVICE_ADD: - if (usb_classdev_add(dev)) - return NOTIFY_BAD; break; case USB_DEVICE_REMOVE: - usb_classdev_remove(dev); usbdev_remove(dev); break; } @@ -2118,21 +2087,6 @@ int __init usb_devio_init(void) USB_DEVICE_MAJOR); goto error_cdev; } -#ifdef CONFIG_USB_DEVICE_CLASS - usb_classdev_class = class_create(THIS_MODULE, "usb_device"); - if (IS_ERR(usb_classdev_class)) { - printk(KERN_ERR "Unable to register usb_device class\n"); - retval = PTR_ERR(usb_classdev_class); - cdev_del(&usb_device_cdev); - usb_classdev_class = NULL; - goto out; - } - /* devices of this class shadow the major:minor of their parent - * device, so clear ->dev_kobj to prevent adding duplicate entries - * to /sys/dev - */ - usb_classdev_class->dev_kobj = NULL; -#endif usb_register_notify(&usbdev_nb); out: return retval; @@ -2145,9 +2099,6 @@ error_cdev: void usb_devio_cleanup(void) { usb_unregister_notify(&usbdev_nb); -#ifdef CONFIG_USB_DEVICE_CLASS - class_destroy(usb_classdev_class); -#endif cdev_del(&usb_device_cdev); unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); } diff --git a/include/linux/usb.h b/include/linux/usb.h index a63c5ba..8fa9a93 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -489,9 +489,6 @@ struct usb_device { char *serial; struct list_head filelist; -#ifdef CONFIG_USB_DEVICE_CLASS - struct device *usb_classdev; -#endif int maxchild; struct usb_device **children; -- cgit v0.10.2 From e6a3b5e2888b51e37c65c97dae966f793bc4806a Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 13 Sep 2011 17:54:39 +0200 Subject: usb: dwc3: ep0: add LPM handling On device loading the driver enables LPM and the acceptance of U1 and U2 states. The [Set|Clear]Feature requests for "U1/U2" are forwarded directly to the hardware and allow / forbid the initiation of the low power links. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index c7b3ca0..93f9973 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -194,6 +194,7 @@ #define DWC3_GHWPARAMS1_EN_PWROPT_CLK 1 /* Device Configuration Register */ +#define DWC3_DCFG_LPM_CAP (1 << 22) #define DWC3_DCFG_DEVADDR(addr) ((addr) << 3) #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f) diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 25910e2..18494b0 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -261,6 +261,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc, { struct dwc3_ep *dep; u32 recip; + u32 reg; u16 usb_status = 0; __le16 *response_pkt; @@ -268,10 +269,18 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc, switch (recip) { case USB_RECIP_DEVICE: /* - * We are self-powered. U1/U2/LTM will be set later - * once we handle this states. RemoteWakeup is 0 on SS + * LTM will be set once we know how to set this in HW. */ usb_status |= dwc->is_selfpowered << USB_DEVICE_SELF_POWERED; + + if (dwc->speed == DWC3_DSTS_SUPERSPEED) { + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (reg & DWC3_DCTL_INITU1ENA) + usb_status |= 1 << USB_DEV_STAT_U1_ENABLED; + if (reg & DWC3_DCTL_INITU2ENA) + usb_status |= 1 << USB_DEV_STAT_U2_ENABLED; + } + break; case USB_RECIP_INTERFACE: @@ -312,6 +321,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, u32 recip; u32 wValue; u32 wIndex; + u32 reg; int ret; wValue = le16_to_cpu(ctrl->wValue); @@ -320,29 +330,43 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, switch (recip) { case USB_RECIP_DEVICE: + switch (wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + break; /* * 9.4.1 says only only for SS, in AddressState only for * default control pipe */ - switch (wValue) { case USB_DEVICE_U1_ENABLE: - case USB_DEVICE_U2_ENABLE: - case USB_DEVICE_LTM_ENABLE: if (dwc->dev_state != DWC3_CONFIGURED_STATE) return -EINVAL; if (dwc->speed != DWC3_DSTS_SUPERSPEED) return -EINVAL; - } - /* XXX add U[12] & LTM */ - switch (wValue) { - case USB_DEVICE_REMOTE_WAKEUP: - break; - case USB_DEVICE_U1_ENABLE: + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (set) + reg |= DWC3_DCTL_INITU1ENA; + else + reg &= ~DWC3_DCTL_INITU1ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); break; + case USB_DEVICE_U2_ENABLE: + if (dwc->dev_state != DWC3_CONFIGURED_STATE) + return -EINVAL; + if (dwc->speed != DWC3_DSTS_SUPERSPEED) + return -EINVAL; + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (set) + reg |= DWC3_DCTL_INITU2ENA; + else + reg &= ~DWC3_DCTL_INITU2ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); break; + case USB_DEVICE_LTM_ENABLE: + return -EINVAL; break; case USB_DEVICE_TEST_MODE: diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index dda56b8..906db57 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1933,6 +1933,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_TSTCTRL_MASK; + reg &= ~(DWC3_DCTL_INITU1ENA | DWC3_DCTL_INITU2ENA); dwc3_writel(dwc->regs, DWC3_DCTL, reg); dwc->test_mode = false; @@ -2330,6 +2331,14 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc) goto err5; } + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg |= DWC3_DCFG_LPM_CAP; + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg |= DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + /* Enable all but Start and End of Frame IRQs */ reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN | DWC3_DEVTEN_EVNTOVERFLOWEN | -- cgit v0.10.2 From 93c309ded1f6d4d0ff210263e62693825d441819 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 24 Apr 2012 15:44:51 +0300 Subject: usb: ch9: define Set SEL and Set Isoch Delay macros These are new requests introduced by USB 3.0 Specification. Gadget controllers should implement them. Signed-off-by: Felipe Balbi diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index af21f31..e785d85 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -88,6 +88,8 @@ #define USB_REQ_GET_INTERFACE 0x0A #define USB_REQ_SET_INTERFACE 0x0B #define USB_REQ_SYNCH_FRAME 0x0C +#define USB_REQ_SET_SEL 0x30 +#define USB_REQ_SET_ISOCH_DELAY 0x31 #define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ #define USB_REQ_GET_ENCRYPTION 0x0E -- cgit v0.10.2 From 880bca3a2a6f159d7453e0cbcbfe2f1d8204d907 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Mon, 30 Apr 2012 09:26:11 +0200 Subject: USB: cdc-wdm: add debug messages on cleanup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Device state cleanup is done in either wdm_disconnect or wdm_release depending on the order they are called. Adding a couple of debug messages to document the program flow. Signed-off-by: Bjørn Mork Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 650e1da..4e8451c 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -620,10 +620,12 @@ static int wdm_release(struct inode *inode, struct file *file) if (!desc->count) { dev_dbg(&desc->intf->dev, "wdm_release: cleanup"); kill_urbs(desc); - if (!test_bit(WDM_DISCONNECTING, &desc->flags)) + if (!test_bit(WDM_DISCONNECTING, &desc->flags)) { desc->manage_power(desc->intf, 0); - else + } else { + dev_dbg(&desc->intf->dev, "%s: device gone - cleaning up\n", __func__); cleanup(desc); + } } mutex_unlock(&wdm_mutex); return 0; @@ -897,6 +899,8 @@ static void wdm_disconnect(struct usb_interface *intf) mutex_unlock(&desc->rlock); if (!desc->count) cleanup(desc); + else + dev_dbg(&intf->dev, "%s: %d open files - postponing cleanup\n", __func__, desc->count); mutex_unlock(&wdm_mutex); } -- cgit v0.10.2 From 12a98b2bd8050b3cf28b50da612c484cdf174368 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 30 Apr 2012 09:57:31 +0200 Subject: USB: cdc-wdm: cleanup error codes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The internal error codes returned in the write() code path cannot be simply passed on to user space. Signed-off-by: Oliver Neukum Tested-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 4e8451c..cd017a9 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -368,6 +368,7 @@ static ssize_t wdm_write r = usb_autopm_get_interface(desc->intf); if (r < 0) { kfree(buf); + rv = usb_translate_errors(r); goto outnp; } @@ -383,6 +384,7 @@ static ssize_t wdm_write if (r < 0) { kfree(buf); + rv = r; goto out; } @@ -412,6 +414,7 @@ static ssize_t wdm_write kfree(buf); clear_bit(WDM_IN_USE, &desc->flags); dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv); + rv = usb_translate_errors(rv); } else { dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d", req->wIndex); @@ -593,6 +596,7 @@ static int wdm_open(struct inode *inode, struct file *file) desc->count--; dev_err(&desc->intf->dev, "Error submitting int urb - %d\n", rv); + rv = usb_translate_errors(rv); } } else { rv = 0; -- cgit v0.10.2 From 166cb70e97bd83d7ae9bbec6ae59a178fd9bb823 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Steffen=20M=C3=BCller?= Date: Mon, 30 Apr 2012 13:05:34 +0200 Subject: usb: add USB_QUIRK_RESET_RESUME for M-Audio 88es MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Tested-by: Steffen Müller Signed-off-by: Steffen Müller Signed-off-by: Stefan Seyfried Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 4c65eb6..32d3adc 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -123,6 +123,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Guillemot Webcam Hercules Dualpix Exchange*/ { USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Midiman M-Audio Keystation 88es */ + { USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v0.10.2 From 8815bb09af21316aeb5f8948b24ac62181670db2 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 30 Apr 2012 09:13:46 +0200 Subject: usbhid: prevent deadlock during timeout On some HCDs usb_unlink_urb() can directly call the completion handler. That limits the spinlocks that can be taken in the handler to locks not held while calling usb_unlink_urb() To prevent a race with resubmission, this patch exposes usbcore's infrastructure for blocking submission, uses it and so drops the lock without causing a race in usbhid. Signed-off-by: Oliver Neukum Acked-by: Jiri Kosina Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 5bf91db..4bbb883 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -399,6 +399,16 @@ static int hid_submit_ctrl(struct hid_device *hid) * Output interrupt completion handler. */ +static int irq_out_pump_restart(struct hid_device *hid) +{ + struct usbhid_device *usbhid = hid->driver_data; + + if (usbhid->outhead != usbhid->outtail) + return hid_submit_out(hid); + else + return -1; +} + static void hid_irq_out(struct urb *urb) { struct hid_device *hid = urb->context; @@ -428,7 +438,7 @@ static void hid_irq_out(struct urb *urb) else usbhid->outtail = (usbhid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1); - if (usbhid->outhead != usbhid->outtail && !hid_submit_out(hid)) { + if (!irq_out_pump_restart(hid)) { /* Successfully submitted next urb in queue */ spin_unlock_irqrestore(&usbhid->lock, flags); return; @@ -443,6 +453,15 @@ static void hid_irq_out(struct urb *urb) /* * Control pipe completion handler. */ +static int ctrl_pump_restart(struct hid_device *hid) +{ + struct usbhid_device *usbhid = hid->driver_data; + + if (usbhid->ctrlhead != usbhid->ctrltail) + return hid_submit_ctrl(hid); + else + return -1; +} static void hid_ctrl(struct urb *urb) { @@ -476,7 +495,7 @@ static void hid_ctrl(struct urb *urb) else usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1); - if (usbhid->ctrlhead != usbhid->ctrltail && !hid_submit_ctrl(hid)) { + if (!ctrl_pump_restart(hid)) { /* Successfully submitted next urb in queue */ spin_unlock(&usbhid->lock); return; @@ -535,11 +554,27 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re * the queue is known to run * but an earlier request may be stuck * we may need to time out - * no race because this is called under + * no race because the URB is blocked under * spinlock */ - if (time_after(jiffies, usbhid->last_out + HZ * 5)) + if (time_after(jiffies, usbhid->last_out + HZ * 5)) { + usb_block_urb(usbhid->urbout); + /* drop lock to not deadlock if the callback is called */ + spin_unlock(&usbhid->lock); usb_unlink_urb(usbhid->urbout); + spin_lock(&usbhid->lock); + usb_unblock_urb(usbhid->urbout); + /* + * if the unlinking has already completed + * the pump will have been stopped + * it must be restarted now + */ + if (!test_bit(HID_OUT_RUNNING, &usbhid->iofl)) + if (!irq_out_pump_restart(hid)) + set_bit(HID_OUT_RUNNING, &usbhid->iofl); + + + } } return; } @@ -583,11 +618,25 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re * the queue is known to run * but an earlier request may be stuck * we may need to time out - * no race because this is called under + * no race because the URB is blocked under * spinlock */ - if (time_after(jiffies, usbhid->last_ctrl + HZ * 5)) + if (time_after(jiffies, usbhid->last_ctrl + HZ * 5)) { + usb_block_urb(usbhid->urbctrl); + /* drop lock to not deadlock if the callback is called */ + spin_unlock(&usbhid->lock); usb_unlink_urb(usbhid->urbctrl); + spin_lock(&usbhid->lock); + usb_unblock_urb(usbhid->urbctrl); + /* + * if the unlinking has already completed + * the pump will have been stopped + * it must be restarted now + */ + if (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl)) + if (!ctrl_pump_restart(hid)) + set_bit(HID_CTRL_RUNNING, &usbhid->iofl); + } } } diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index cd9b3a2..9d912bf 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -681,6 +681,27 @@ void usb_unpoison_urb(struct urb *urb) EXPORT_SYMBOL_GPL(usb_unpoison_urb); /** + * usb_block_urb - reliably prevent further use of an URB + * @urb: pointer to URB to be blocked, may be NULL + * + * After the routine has run, attempts to resubmit the URB will fail + * with error -EPERM. Thus even if the URB's completion handler always + * tries to resubmit, it will not succeed and the URB will become idle. + * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + */ +void usb_block_urb(struct urb *urb) +{ + if (!urb) + return; + + atomic_inc(&urb->reject); +} +EXPORT_SYMBOL_GPL(usb_block_urb); + +/** * usb_kill_anchored_urbs - cancel transfer requests en masse * @anchor: anchor the requests are bound to * diff --git a/include/linux/usb.h b/include/linux/usb.h index 8fa9a93..5483cd7 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1369,6 +1369,7 @@ extern int usb_unlink_urb(struct urb *urb); extern void usb_kill_urb(struct urb *urb); extern void usb_poison_urb(struct urb *urb); extern void usb_unpoison_urb(struct urb *urb); +extern void usb_block_urb(struct urb *urb); extern void usb_kill_anchored_urbs(struct usb_anchor *anchor); extern void usb_poison_anchored_urbs(struct usb_anchor *anchor); extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor); @@ -1381,6 +1382,8 @@ extern struct urb *usb_get_from_anchor(struct usb_anchor *anchor); extern void usb_scuttle_anchored_urbs(struct usb_anchor *anchor); extern int usb_anchor_empty(struct usb_anchor *anchor); +#define usb_unblock_urb usb_unpoison_urb + /** * usb_urb_dir_in - check if an URB describes an IN transfer * @urb: URB to be checked -- cgit v0.10.2 From a6a99cf0713c5336ad564b055d4ed34537700df4 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Sun, 29 Apr 2012 16:47:02 +0200 Subject: ohci-nxp: Driver cleanup Cleanup for ohci-nxp.c: * Cleanup of resource handling (mem and irq), use devm_request_and_ioremap() * Use DMA_BIT_MASK() * Don't remove __devinit * Removed obsolete gpio.h include * More consistent bit access symbols * Removed unused extern declaration ocpi_enable() * Added error handling on i2c_get_adapter() * Whitespace cleanup Signed-off-by: Roland Stigge Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index d02abc3..63261f7 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -29,7 +29,6 @@ #include #include -#include #define USB_CONFIG_BASE 0x31020000 #define PWRMAN_BASE 0x40004000 @@ -38,7 +37,9 @@ /* USB_CTRL bit defines */ #define USB_SLAVE_HCLK_EN (1 << 24) +#define USB_DEV_NEED_CLK_EN (1 << 22) #define USB_HOST_NEED_CLK_EN (1 << 21) +#define PAD_CONTROL_LAST_DRIVEN (1 << 19) #define USB_OTG_CLK_CTRL IO_ADDRESS(USB_CONFIG_BASE + 0xFF4) #define USB_OTG_CLK_STAT IO_ADDRESS(USB_CONFIG_BASE + 0xFF8) @@ -117,7 +118,6 @@ static struct i2c_driver isp1301_driver; static struct i2c_client *isp1301_i2c_client; extern int usb_disabled(void); -extern int ocpi_enable(void); static struct clk *usb_clk; @@ -220,7 +220,7 @@ static void isp1301_configure_lpc32xx(void) ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); /* Enable usb_need_clk clock after transceiver is initialized */ - __raw_writel((__raw_readl(USB_CTRL) | (1 << 22)), USB_CTRL); + __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL); printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n", i2c_smbus_read_word_data(isp1301_i2c_client, 0x00)); @@ -374,9 +374,13 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) const struct hc_driver *driver = &ohci_nxp_hc_driver; struct i2c_adapter *i2c_adap; struct i2c_board_info i2c_info; + struct resource *res; int ret = 0, irq; + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name); if (usb_disabled()) { dev_err(&pdev->dev, "USB is disabled\n"); @@ -384,16 +388,8 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) goto out; } - if (pdev->num_resources != 2 - || pdev->resource[0].flags != IORESOURCE_MEM - || pdev->resource[1].flags != IORESOURCE_IRQ) { - dev_err(&pdev->dev, "Invalid resource configuration\\nn"); - ret = -ENODEV; - goto out; - } - /* Enable AHB slave USB clock, needed for further USB clock control */ - __raw_writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL); + __raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL); ret = i2c_add_driver(&isp1301_driver); if (ret < 0) { @@ -401,6 +397,11 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) goto out; } i2c_adap = i2c_get_adapter(2); + if (!i2c_adap) { + dev_err(&pdev->dev, "failed on i2c_get_adapter"); + goto out_i2c_driver; + } + memset(&i2c_info, 0, sizeof(struct i2c_board_info)); strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE); isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info, @@ -442,7 +443,7 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) != USB_CLOCK_MASK) ; - hcd = usb_create_hcd (driver, &pdev->dev, dev_name(&pdev->dev)); + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { dev_err(&pdev->dev, "Failed to allocate HC buffer\n"); ret = -ENOMEM; @@ -452,14 +453,21 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) /* Set all USB bits in the Start Enable register */ nxp_set_usb_bits(); - hcd->rsrc_start = pdev->resource[0].start; - hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dev_dbg(&pdev->dev, "request_mem_region failed\n"); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Failed to get MEM resource\n"); + ret = -ENOMEM; + goto out4; + } + + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); + if (!hcd->regs) { + dev_err(&pdev->dev, "Failed to devm_request_and_ioremap\n"); ret = -ENOMEM; goto out4; } - hcd->regs = (void __iomem *)pdev->resource[0].start; + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); irq = platform_get_irq(pdev, 0); if (irq < 0) { -- cgit v0.10.2 From 2265efea38c45ba42a4e483eee11740730f053d2 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Sun, 29 Apr 2012 16:47:03 +0200 Subject: ohci-nxp: Device tree support This patch adds device tree support to ohci-nxp.c Signed-off-by: Roland Stigge Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/usb/ohci-nxp.txt b/Documentation/devicetree/bindings/usb/ohci-nxp.txt new file mode 100644 index 0000000..b5c3631 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ohci-nxp.txt @@ -0,0 +1,16 @@ +* OHCI controller, NXP ohci-nxp variant + +Required properties: +- compatible: must be "nxp,ohci-nxp" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The OHCI interrupt + +Example (LPC32xx): + + ohci@31020000 { + compatible = "nxp,ohci-nxp"; + reg = <0x31020000 0x300>; + interrupt-parent = <&mic>; + interrupts = <0x3b 0>; + }; diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index 63261f7..bf542e7 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -525,10 +526,19 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev) /* work with hotplug and coldplug */ MODULE_ALIAS("platform:usb-ohci"); +#ifdef CONFIG_OF +static const struct of_device_id usb_hcd_nxp_match[] = { + { .compatible = "nxp,ohci-nxp" }, + {}, +}; +MODULE_DEVICE_TABLE(of, usb_hcd_nxp_match); +#endif + static struct platform_driver usb_hcd_nxp_driver = { .driver = { .name = "usb-ohci", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(usb_hcd_nxp_match), }, .probe = usb_hcd_nxp_probe, .remove = usb_hcd_nxp_remove, -- cgit v0.10.2 From 8b7c3b68104d687a16dbcc803a18c72148fdfdac Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Sun, 29 Apr 2012 16:47:04 +0200 Subject: USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/usb/isp1301.txt b/Documentation/devicetree/bindings/usb/isp1301.txt new file mode 100644 index 0000000..5405d99 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/isp1301.txt @@ -0,0 +1,25 @@ +* NXP ISP1301 USB transceiver + +Required properties: +- compatible: must be "nxp,isp1301" +- reg: I2C address of the ISP1301 device + +Optional properties of devices using ISP1301: +- transceiver: phandle of isp1301 - this helps the ISP1301 driver to find the + ISP1301 instance associated with the respective USB driver + +Example: + + isp1301: usb-transceiver@2c { + compatible = "nxp,isp1301"; + reg = <0x2c>; + }; + + usbd@31020000 { + compatible = "nxp,lpc3220-udc"; + reg = <0x31020000 0x300>; + interrupt-parent = <&mic>; + interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + transceiver = <&isp1301>; + status = "okay"; + }; diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 76316a3..4473ae5 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -177,6 +177,8 @@ source "drivers/usb/serial/Kconfig" source "drivers/usb/misc/Kconfig" +source "drivers/usb/phy/Kconfig" + source "drivers/usb/atm/Kconfig" source "drivers/usb/gadget/Kconfig" diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 53a7bc0..77c835a 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ +obj-$(CONFIG_USB) += phy/ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ obj-$(CONFIG_USB_ATM) += atm/ diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig new file mode 100644 index 0000000..3cfabcb --- /dev/null +++ b/drivers/usb/phy/Kconfig @@ -0,0 +1,17 @@ +# +# Physical Layer USB driver configuration +# +comment "USB Physical Layer drivers" + depends on USB + +config USB_ISP1301 + tristate "NXP ISP1301 USB transceiver support" + depends on USB + depends on I2C + help + Say Y here to add support for the NXP ISP1301 USB transceiver driver. + This chip is typically used as USB transceiver for USB host, gadget + and OTG drivers (to be selected separately). + + To compile this driver as a module, choose M here: the + module will be called isp1301. diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile new file mode 100644 index 0000000..eca095b --- /dev/null +++ b/drivers/usb/phy/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for physical layer USB drivers +# + +ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG + +obj-$(CONFIG_USB_ISP1301) += isp1301.o diff --git a/drivers/usb/phy/isp1301.c b/drivers/usb/phy/isp1301.c new file mode 100644 index 0000000..b19f493 --- /dev/null +++ b/drivers/usb/phy/isp1301.c @@ -0,0 +1,77 @@ +/* + * NXP ISP1301 USB transceiver driver + * + * Copyright (C) 2012 Roland Stigge + * + * Author: Roland Stigge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#define DRV_NAME "isp1301" + +#define ISP1301_I2C_ADDR 0x2C + +static const unsigned short normal_i2c[] = { + ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END +}; + +static const struct i2c_device_id isp1301_id[] = { + { "isp1301", 0 }, + { } +}; + +static struct i2c_client *isp1301_i2c_client; + +static int isp1301_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + isp1301_i2c_client = client; + return 0; +} + +static int isp1301_remove(struct i2c_client *client) +{ + return 0; +} + +static struct i2c_driver isp1301_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = isp1301_probe, + .remove = isp1301_remove, + .id_table = isp1301_id, +}; + +module_i2c_driver(isp1301_driver); + +static int match(struct device *dev, void *data) +{ + struct device_node *node = (struct device_node *)data; + return (dev->of_node == node) && + (dev->driver == &isp1301_driver.driver); +} + +struct i2c_client *isp1301_get_client(struct device_node *node) +{ + if (node) { /* reference of ISP1301 I2C node via DT */ + struct device *dev = bus_find_device(&i2c_bus_type, NULL, + node, match); + if (!dev) + return NULL; + return to_i2c_client(dev); + } else { /* non-DT: only one ISP1301 chip supported */ + return isp1301_i2c_client; + } +} +EXPORT_SYMBOL_GPL(isp1301_get_client); + +MODULE_AUTHOR("Roland Stigge "); +MODULE_DESCRIPTION("NXP ISP1301 USB transceiver driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/usb/isp1301.h b/include/linux/usb/isp1301.h new file mode 100644 index 0000000..d3a851c --- /dev/null +++ b/include/linux/usb/isp1301.h @@ -0,0 +1,80 @@ +/* + * NXP ISP1301 USB transceiver driver + * + * Copyright (C) 2012 Roland Stigge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __LINUX_USB_ISP1301_H +#define __LINUX_USB_ISP1301_H + +#include + +/* I2C Register definitions: */ + +#define ISP1301_I2C_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */ + +#define MC1_SPEED_REG (1 << 0) +#define MC1_SUSPEND_REG (1 << 1) +#define MC1_DAT_SE0 (1 << 2) +#define MC1_TRANSPARENT (1 << 3) +#define MC1_BDIS_ACON_EN (1 << 4) +#define MC1_OE_INT_EN (1 << 5) +#define MC1_UART_EN (1 << 6) +#define MC1_MASK 0x7f + +#define ISP1301_I2C_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */ + +#define MC2_GLOBAL_PWR_DN (1 << 0) +#define MC2_SPD_SUSP_CTRL (1 << 1) +#define MC2_BI_DI (1 << 2) +#define MC2_TRANSP_BDIR0 (1 << 3) +#define MC2_TRANSP_BDIR1 (1 << 4) +#define MC2_AUDIO_EN (1 << 5) +#define MC2_PSW_EN (1 << 6) +#define MC2_EN2V7 (1 << 7) + +#define ISP1301_I2C_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */ + +#define OTG1_DP_PULLUP (1 << 0) +#define OTG1_DM_PULLUP (1 << 1) +#define OTG1_DP_PULLDOWN (1 << 2) +#define OTG1_DM_PULLDOWN (1 << 3) +#define OTG1_ID_PULLDOWN (1 << 4) +#define OTG1_VBUS_DRV (1 << 5) +#define OTG1_VBUS_DISCHRG (1 << 6) +#define OTG1_VBUS_CHRG (1 << 7) + +#define ISP1301_I2C_OTG_CONTROL_2 0x10 /* u8 readonly */ + +#define OTG_B_SESS_END (1 << 6) +#define OTG_B_SESS_VLD (1 << 7) + +#define ISP1301_I2C_INTERRUPT_SOURCE 0x8 +#define ISP1301_I2C_INTERRUPT_LATCH 0xA +#define ISP1301_I2C_INTERRUPT_FALLING 0xC +#define ISP1301_I2C_INTERRUPT_RISING 0xE + +#define INT_VBUS_VLD (1 << 0) +#define INT_SESS_VLD (1 << 1) +#define INT_DP_HI (1 << 2) +#define INT_ID_GND (1 << 3) +#define INT_DM_HI (1 << 4) +#define INT_ID_FLOAT (1 << 5) +#define INT_BDIS_ACON (1 << 6) +#define INT_CR_INT (1 << 7) + +#define ISP1301_I2C_REG_CLEAR_ADDR 1 /* Register Address Modifier */ + +struct i2c_client *isp1301_get_client(struct device_node *node); + +#endif /* __LINUX_USB_ISP1301_H */ -- cgit v0.10.2 From 24a28e4283510dcd58890379a42b8a7d3201d9d3 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Sun, 29 Apr 2012 16:47:05 +0200 Subject: USB: gadget driver for LPC32xx This patch adds a USB gadget driver for the LPC32xx ARM SoC. Signed-off-by: Roland Stigge Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt b/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt new file mode 100644 index 0000000..29f12a5 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt @@ -0,0 +1,28 @@ +* NXP LPC32xx SoC USB Device Controller (UDC) + +Required properties: +- compatible: Must be "nxp,lpc3220-udc" +- reg: Physical base address of the controller and length of memory mapped + region. +- interrupts: The USB interrupts: + * USB Device Low Priority Interrupt + * USB Device High Priority Interrupt + * USB Device DMA Interrupt + * External USB Transceiver Interrupt (OTG ATX) +- transceiver: phandle of the associated ISP1301 device - this is necessary for + the UDC controller for connecting to the USB physical layer + +Example: + + isp1301: usb-transceiver@2c { + compatible = "nxp,isp1301"; + reg = <0x2c>; + }; + + usbd@31020000 { + compatible = "nxp,lpc3220-udc"; + reg = <0x31020000 0x300>; + interrupt-parent = <&mic>; + interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + transceiver = <&isp1301>; + }; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 2633f75..8276972 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -147,6 +147,17 @@ config USB_AT91 dynamically linked module called "at91_udc" and force all gadget drivers to also be dynamically linked. +config USB_LPC32XX + tristate "LPC32XX USB Peripheral Controller" + depends on ARCH_LPC32XX + select USB_ISP1301 + help + This option selects the USB device controller in the LPC32xx SoC. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "lpc32xx_udc" and force all + gadget drivers to also be dynamically linked. + config USB_ATMEL_USBA tristate "Atmel USBA" select USB_GADGET_DUALSPEED diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index b7f6eef..1565253 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_USB_CI13XXX_PCI) += ci13xxx_pci.o obj-$(CONFIG_USB_S3C_HSOTG) += s3c-hsotg.o obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o obj-$(CONFIG_USB_LANGWELL) += langwell_udc.o +obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o obj-$(CONFIG_USB_EG20T) += pch_udc.o obj-$(CONFIG_USB_MV_UDC) += mv_udc.o mv_udc-y := mv_udc_core.o diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index a8855d0..b8b3a34 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -37,6 +37,7 @@ #define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name)) #define gadget_is_imx(g) (!strcmp("imx_udc", (g)->name)) #define gadget_is_langwell(g) (!strcmp("langwell_udc", (g)->name)) +#define gadget_is_lpc32xx(g) (!strcmp("lpc32xx_udc", (g)->name)) #define gadget_is_m66592(g) (!strcmp("m66592_udc", (g)->name)) #define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name)) #define gadget_is_net2272(g) (!strcmp("net2272", (g)->name)) @@ -118,6 +119,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x31; else if (gadget_is_dwc3(gadget)) return 0x32; + else if (gadget_is_lpc32xx(gadget)) + return 0x33; return -ENOENT; } diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c new file mode 100644 index 0000000..262acfd --- /dev/null +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -0,0 +1,3538 @@ +/* + * USB Gadget driver for LPC32xx + * + * Authors: + * Kevin Wells + * Mike James + * Roland Stigge + * + * Copyright (C) 2006 Philips Semiconductors + * Copyright (C) 2009 NXP Semiconductors + * Copyright (C) 2012 Roland Stigge + * + * Note: This driver is based on original work done by Mike James for + * the LPC3180. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#ifdef CONFIG_USB_GADGET_DEBUG_FILES +#include +#endif + +/* + * USB device configuration structure + */ +typedef void (*usc_chg_event)(int); +struct lpc32xx_usbd_cfg { + int vbus_drv_pol; /* 0=active low drive for VBUS via ISP1301 */ + usc_chg_event conn_chgb; /* Connection change event (optional) */ + usc_chg_event susp_chgb; /* Suspend/resume event (optional) */ + usc_chg_event rmwk_chgb; /* Enable/disable remote wakeup */ +}; + +/* + * controller driver data structures + */ + +/* 16 endpoints (not to be confused with 32 hardware endpoints) */ +#define NUM_ENDPOINTS 16 + +/* + * IRQ indices make reading the code a little easier + */ +#define IRQ_USB_LP 0 +#define IRQ_USB_HP 1 +#define IRQ_USB_DEVDMA 2 +#define IRQ_USB_ATX 3 + +#define EP_OUT 0 /* RX (from host) */ +#define EP_IN 1 /* TX (to host) */ + +/* Returns the interrupt mask for the selected hardware endpoint */ +#define EP_MASK_SEL(ep, dir) (1 << (((ep) * 2) + dir)) + +#define EP_INT_TYPE 0 +#define EP_ISO_TYPE 1 +#define EP_BLK_TYPE 2 +#define EP_CTL_TYPE 3 + +/* EP0 states */ +#define WAIT_FOR_SETUP 0 /* Wait for setup packet */ +#define DATA_IN 1 /* Expect dev->host transfer */ +#define DATA_OUT 2 /* Expect host->dev transfer */ + +/* DD (DMA Descriptor) structure, requires word alignment, this is already + * defined in the LPC32XX USB device header file, but this version is slightly + * modified to tag some work data with each DMA descriptor. */ +struct lpc32xx_usbd_dd_gad { + u32 dd_next_phy; + u32 dd_setup; + u32 dd_buffer_addr; + u32 dd_status; + u32 dd_iso_ps_mem_addr; + u32 this_dma; + u32 iso_status[6]; /* 5 spare */ + u32 dd_next_v; +}; + +/* + * Logical endpoint structure + */ +struct lpc32xx_ep { + struct usb_ep ep; + struct list_head queue; + struct lpc32xx_udc *udc; + + u32 hwep_num_base; /* Physical hardware EP */ + u32 hwep_num; /* Maps to hardware endpoint */ + u32 maxpacket; + u32 lep; + + bool is_in; + bool req_pending; + u32 eptype; + + u32 totalints; + + bool wedge; + + const struct usb_endpoint_descriptor *desc; +}; + +/* + * Common UDC structure + */ +struct lpc32xx_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct platform_device *pdev; + struct device *dev; + struct dentry *pde; + spinlock_t lock; + struct i2c_client *isp1301_i2c_client; + + /* Board and device specific */ + struct lpc32xx_usbd_cfg *board; + u32 io_p_start; + u32 io_p_size; + void __iomem *udp_baseaddr; + int udp_irq[4]; + struct clk *usb_pll_clk; + struct clk *usb_slv_clk; + + /* DMA support */ + u32 *udca_v_base; + u32 udca_p_base; + struct dma_pool *dd_cache; + + /* Common EP and control data */ + u32 enabled_devints; + u32 enabled_hwepints; + u32 dev_status; + u32 realized_eps; + + /* VBUS detection, pullup, and power flags */ + u8 vbus; + u8 last_vbus; + int pullup; + int poweron; + + /* Work queues related to I2C support */ + struct work_struct pullup_job; + struct work_struct vbus_job; + struct work_struct power_job; + + /* USB device peripheral - various */ + struct lpc32xx_ep ep[NUM_ENDPOINTS]; + bool enabled; + bool clocked; + bool suspended; + bool selfpowered; + int ep0state; + atomic_t enabled_ep_cnt; + wait_queue_head_t ep_disable_wait_queue; +}; + +/* + * Endpoint request + */ +struct lpc32xx_request { + struct usb_request req; + struct list_head queue; + struct lpc32xx_usbd_dd_gad *dd_desc_ptr; + bool mapped; + bool send_zlp; +}; + +static inline struct lpc32xx_udc *to_udc(struct usb_gadget *g) +{ + return container_of(g, struct lpc32xx_udc, gadget); +} + +#define ep_dbg(epp, fmt, arg...) \ + dev_dbg(epp->udc->dev, "%s: " fmt, __func__, ## arg) +#define ep_err(epp, fmt, arg...) \ + dev_err(epp->udc->dev, "%s: " fmt, __func__, ## arg) +#define ep_info(epp, fmt, arg...) \ + dev_info(epp->udc->dev, "%s: " fmt, __func__, ## arg) +#define ep_warn(epp, fmt, arg...) \ + dev_warn(epp->udc->dev, "%s:" fmt, __func__, ## arg) + +#define UDCA_BUFF_SIZE (128) + +/* TODO: When the clock framework is introduced in LPC32xx, IO_ADDRESS will + * be replaced with an inremap()ed pointer, see USB_OTG_CLK_CTRL() + * */ +#define USB_CTRL IO_ADDRESS(LPC32XX_CLK_PM_BASE + 0x64) +#define USB_CLOCK_MASK (AHB_M_CLOCK_ON | OTG_CLOCK_ON | \ + DEV_CLOCK_ON | I2C_CLOCK_ON) + +/* USB_CTRL bit defines */ +#define USB_SLAVE_HCLK_EN (1 << 24) +#define USB_HOST_NEED_CLK_EN (1 << 21) +#define USB_DEV_NEED_CLK_EN (1 << 22) + +#define USB_OTG_CLK_CTRL(udc) ((udc)->udp_baseaddr + 0xFF4) +#define USB_OTG_CLK_STAT(udc) ((udc)->udp_baseaddr + 0xFF8) + +/* USB_OTG_CLK_CTRL bit defines */ +#define AHB_M_CLOCK_ON (1 << 4) +#define OTG_CLOCK_ON (1 << 3) +#define I2C_CLOCK_ON (1 << 2) +#define DEV_CLOCK_ON (1 << 1) +#define HOST_CLOCK_ON (1 << 0) + +#define USB_OTG_STAT_CONTROL(udc) (udc->udp_baseaddr + 0x110) + +/* USB_OTG_STAT_CONTROL bit defines */ +#define TRANSPARENT_I2C_EN (1 << 7) +#define HOST_EN (1 << 0) + +/********************************************************************** + * USB device controller register offsets + **********************************************************************/ + +#define USBD_DEVINTST(x) ((x) + 0x200) +#define USBD_DEVINTEN(x) ((x) + 0x204) +#define USBD_DEVINTCLR(x) ((x) + 0x208) +#define USBD_DEVINTSET(x) ((x) + 0x20C) +#define USBD_CMDCODE(x) ((x) + 0x210) +#define USBD_CMDDATA(x) ((x) + 0x214) +#define USBD_RXDATA(x) ((x) + 0x218) +#define USBD_TXDATA(x) ((x) + 0x21C) +#define USBD_RXPLEN(x) ((x) + 0x220) +#define USBD_TXPLEN(x) ((x) + 0x224) +#define USBD_CTRL(x) ((x) + 0x228) +#define USBD_DEVINTPRI(x) ((x) + 0x22C) +#define USBD_EPINTST(x) ((x) + 0x230) +#define USBD_EPINTEN(x) ((x) + 0x234) +#define USBD_EPINTCLR(x) ((x) + 0x238) +#define USBD_EPINTSET(x) ((x) + 0x23C) +#define USBD_EPINTPRI(x) ((x) + 0x240) +#define USBD_REEP(x) ((x) + 0x244) +#define USBD_EPIND(x) ((x) + 0x248) +#define USBD_EPMAXPSIZE(x) ((x) + 0x24C) +/* DMA support registers only below */ +/* Set, clear, or get enabled state of the DMA request status. If + * enabled, an IN or OUT token will start a DMA transfer for the EP */ +#define USBD_DMARST(x) ((x) + 0x250) +#define USBD_DMARCLR(x) ((x) + 0x254) +#define USBD_DMARSET(x) ((x) + 0x258) +/* DMA UDCA head pointer */ +#define USBD_UDCAH(x) ((x) + 0x280) +/* EP DMA status, enable, and disable. This is used to specifically + * enabled or disable DMA for a specific EP */ +#define USBD_EPDMAST(x) ((x) + 0x284) +#define USBD_EPDMAEN(x) ((x) + 0x288) +#define USBD_EPDMADIS(x) ((x) + 0x28C) +/* DMA master interrupts enable and pending interrupts */ +#define USBD_DMAINTST(x) ((x) + 0x290) +#define USBD_DMAINTEN(x) ((x) + 0x294) +/* DMA end of transfer interrupt enable, disable, status */ +#define USBD_EOTINTST(x) ((x) + 0x2A0) +#define USBD_EOTINTCLR(x) ((x) + 0x2A4) +#define USBD_EOTINTSET(x) ((x) + 0x2A8) +/* New DD request interrupt enable, disable, status */ +#define USBD_NDDRTINTST(x) ((x) + 0x2AC) +#define USBD_NDDRTINTCLR(x) ((x) + 0x2B0) +#define USBD_NDDRTINTSET(x) ((x) + 0x2B4) +/* DMA error interrupt enable, disable, status */ +#define USBD_SYSERRTINTST(x) ((x) + 0x2B8) +#define USBD_SYSERRTINTCLR(x) ((x) + 0x2BC) +#define USBD_SYSERRTINTSET(x) ((x) + 0x2C0) + +/********************************************************************** + * USBD_DEVINTST/USBD_DEVINTEN/USBD_DEVINTCLR/USBD_DEVINTSET/ + * USBD_DEVINTPRI register definitions + **********************************************************************/ +#define USBD_ERR_INT (1 << 9) +#define USBD_EP_RLZED (1 << 8) +#define USBD_TXENDPKT (1 << 7) +#define USBD_RXENDPKT (1 << 6) +#define USBD_CDFULL (1 << 5) +#define USBD_CCEMPTY (1 << 4) +#define USBD_DEV_STAT (1 << 3) +#define USBD_EP_SLOW (1 << 2) +#define USBD_EP_FAST (1 << 1) +#define USBD_FRAME (1 << 0) + +/********************************************************************** + * USBD_EPINTST/USBD_EPINTEN/USBD_EPINTCLR/USBD_EPINTSET/ + * USBD_EPINTPRI register definitions + **********************************************************************/ +/* End point selection macro (RX) */ +#define USBD_RX_EP_SEL(e) (1 << ((e) << 1)) + +/* End point selection macro (TX) */ +#define USBD_TX_EP_SEL(e) (1 << (((e) << 1) + 1)) + +/********************************************************************** + * USBD_REEP/USBD_DMARST/USBD_DMARCLR/USBD_DMARSET/USBD_EPDMAST/ + * USBD_EPDMAEN/USBD_EPDMADIS/ + * USBD_NDDRTINTST/USBD_NDDRTINTCLR/USBD_NDDRTINTSET/ + * USBD_EOTINTST/USBD_EOTINTCLR/USBD_EOTINTSET/ + * USBD_SYSERRTINTST/USBD_SYSERRTINTCLR/USBD_SYSERRTINTSET + * register definitions + **********************************************************************/ +/* Endpoint selection macro */ +#define USBD_EP_SEL(e) (1 << (e)) + +/********************************************************************** + * SBD_DMAINTST/USBD_DMAINTEN + **********************************************************************/ +#define USBD_SYS_ERR_INT (1 << 2) +#define USBD_NEW_DD_INT (1 << 1) +#define USBD_EOT_INT (1 << 0) + +/********************************************************************** + * USBD_RXPLEN register definitions + **********************************************************************/ +#define USBD_PKT_RDY (1 << 11) +#define USBD_DV (1 << 10) +#define USBD_PK_LEN_MASK 0x3FF + +/********************************************************************** + * USBD_CTRL register definitions + **********************************************************************/ +#define USBD_LOG_ENDPOINT(e) ((e) << 2) +#define USBD_WR_EN (1 << 1) +#define USBD_RD_EN (1 << 0) + +/********************************************************************** + * USBD_CMDCODE register definitions + **********************************************************************/ +#define USBD_CMD_CODE(c) ((c) << 16) +#define USBD_CMD_PHASE(p) ((p) << 8) + +/********************************************************************** + * USBD_DMARST/USBD_DMARCLR/USBD_DMARSET register definitions + **********************************************************************/ +#define USBD_DMAEP(e) (1 << (e)) + +/* DD (DMA Descriptor) structure, requires word alignment */ +struct lpc32xx_usbd_dd { + u32 *dd_next; + u32 dd_setup; + u32 dd_buffer_addr; + u32 dd_status; + u32 dd_iso_ps_mem_addr; +}; + +/* dd_setup bit defines */ +#define DD_SETUP_ATLE_DMA_MODE 0x01 +#define DD_SETUP_NEXT_DD_VALID 0x04 +#define DD_SETUP_ISO_EP 0x10 +#define DD_SETUP_PACKETLEN(n) (((n) & 0x7FF) << 5) +#define DD_SETUP_DMALENBYTES(n) (((n) & 0xFFFF) << 16) + +/* dd_status bit defines */ +#define DD_STATUS_DD_RETIRED 0x01 +#define DD_STATUS_STS_MASK 0x1E +#define DD_STATUS_STS_NS 0x00 /* Not serviced */ +#define DD_STATUS_STS_BS 0x02 /* Being serviced */ +#define DD_STATUS_STS_NC 0x04 /* Normal completion */ +#define DD_STATUS_STS_DUR 0x06 /* Data underrun (short packet) */ +#define DD_STATUS_STS_DOR 0x08 /* Data overrun */ +#define DD_STATUS_STS_SE 0x12 /* System error */ +#define DD_STATUS_PKT_VAL 0x20 /* Packet valid */ +#define DD_STATUS_LSB_EX 0x40 /* LS byte extracted (ATLE) */ +#define DD_STATUS_MSB_EX 0x80 /* MS byte extracted (ATLE) */ +#define DD_STATUS_MLEN(n) (((n) >> 8) & 0x3F) +#define DD_STATUS_CURDMACNT(n) (((n) >> 16) & 0xFFFF) + +/* + * + * Protocol engine bits below + * + */ +/* Device Interrupt Bit Definitions */ +#define FRAME_INT 0x00000001 +#define EP_FAST_INT 0x00000002 +#define EP_SLOW_INT 0x00000004 +#define DEV_STAT_INT 0x00000008 +#define CCEMTY_INT 0x00000010 +#define CDFULL_INT 0x00000020 +#define RxENDPKT_INT 0x00000040 +#define TxENDPKT_INT 0x00000080 +#define EP_RLZED_INT 0x00000100 +#define ERR_INT 0x00000200 + +/* Rx & Tx Packet Length Definitions */ +#define PKT_LNGTH_MASK 0x000003FF +#define PKT_DV 0x00000400 +#define PKT_RDY 0x00000800 + +/* USB Control Definitions */ +#define CTRL_RD_EN 0x00000001 +#define CTRL_WR_EN 0x00000002 + +/* Command Codes */ +#define CMD_SET_ADDR 0x00D00500 +#define CMD_CFG_DEV 0x00D80500 +#define CMD_SET_MODE 0x00F30500 +#define CMD_RD_FRAME 0x00F50500 +#define DAT_RD_FRAME 0x00F50200 +#define CMD_RD_TEST 0x00FD0500 +#define DAT_RD_TEST 0x00FD0200 +#define CMD_SET_DEV_STAT 0x00FE0500 +#define CMD_GET_DEV_STAT 0x00FE0500 +#define DAT_GET_DEV_STAT 0x00FE0200 +#define CMD_GET_ERR_CODE 0x00FF0500 +#define DAT_GET_ERR_CODE 0x00FF0200 +#define CMD_RD_ERR_STAT 0x00FB0500 +#define DAT_RD_ERR_STAT 0x00FB0200 +#define DAT_WR_BYTE(x) (0x00000100 | ((x) << 16)) +#define CMD_SEL_EP(x) (0x00000500 | ((x) << 16)) +#define DAT_SEL_EP(x) (0x00000200 | ((x) << 16)) +#define CMD_SEL_EP_CLRI(x) (0x00400500 | ((x) << 16)) +#define DAT_SEL_EP_CLRI(x) (0x00400200 | ((x) << 16)) +#define CMD_SET_EP_STAT(x) (0x00400500 | ((x) << 16)) +#define CMD_CLR_BUF 0x00F20500 +#define DAT_CLR_BUF 0x00F20200 +#define CMD_VALID_BUF 0x00FA0500 + +/* Device Address Register Definitions */ +#define DEV_ADDR_MASK 0x7F +#define DEV_EN 0x80 + +/* Device Configure Register Definitions */ +#define CONF_DVICE 0x01 + +/* Device Mode Register Definitions */ +#define AP_CLK 0x01 +#define INAK_CI 0x02 +#define INAK_CO 0x04 +#define INAK_II 0x08 +#define INAK_IO 0x10 +#define INAK_BI 0x20 +#define INAK_BO 0x40 + +/* Device Status Register Definitions */ +#define DEV_CON 0x01 +#define DEV_CON_CH 0x02 +#define DEV_SUS 0x04 +#define DEV_SUS_CH 0x08 +#define DEV_RST 0x10 + +/* Error Code Register Definitions */ +#define ERR_EC_MASK 0x0F +#define ERR_EA 0x10 + +/* Error Status Register Definitions */ +#define ERR_PID 0x01 +#define ERR_UEPKT 0x02 +#define ERR_DCRC 0x04 +#define ERR_TIMOUT 0x08 +#define ERR_EOP 0x10 +#define ERR_B_OVRN 0x20 +#define ERR_BTSTF 0x40 +#define ERR_TGL 0x80 + +/* Endpoint Select Register Definitions */ +#define EP_SEL_F 0x01 +#define EP_SEL_ST 0x02 +#define EP_SEL_STP 0x04 +#define EP_SEL_PO 0x08 +#define EP_SEL_EPN 0x10 +#define EP_SEL_B_1_FULL 0x20 +#define EP_SEL_B_2_FULL 0x40 + +/* Endpoint Status Register Definitions */ +#define EP_STAT_ST 0x01 +#define EP_STAT_DA 0x20 +#define EP_STAT_RF_MO 0x40 +#define EP_STAT_CND_ST 0x80 + +/* Clear Buffer Register Definitions */ +#define CLR_BUF_PO 0x01 + +/* DMA Interrupt Bit Definitions */ +#define EOT_INT 0x01 +#define NDD_REQ_INT 0x02 +#define SYS_ERR_INT 0x04 + +#define DRIVER_VERSION "1.03" +static const char driver_name[] = "lpc32xx_udc"; + +/* + * + * proc interface support + * + */ +#ifdef CONFIG_USB_GADGET_DEBUG_FILES +static char *epnames[] = {"INT", "ISO", "BULK", "CTRL"}; +static const char debug_filename[] = "driver/udc"; + +static void proc_ep_show(struct seq_file *s, struct lpc32xx_ep *ep) +{ + struct lpc32xx_request *req; + + seq_printf(s, "\n"); + seq_printf(s, "%12s, maxpacket %4d %3s", + ep->ep.name, ep->ep.maxpacket, + ep->is_in ? "in" : "out"); + seq_printf(s, " type %4s", epnames[ep->eptype]); + seq_printf(s, " ints: %12d", ep->totalints); + + if (list_empty(&ep->queue)) + seq_printf(s, "\t(queue empty)\n"); + else { + list_for_each_entry(req, &ep->queue, queue) { + u32 length = req->req.actual; + + seq_printf(s, "\treq %p len %d/%d buf %p\n", + &req->req, length, + req->req.length, req->req.buf); + } + } +} + +static int proc_udc_show(struct seq_file *s, void *unused) +{ + struct lpc32xx_udc *udc = s->private; + struct lpc32xx_ep *ep; + unsigned long flags; + + seq_printf(s, "%s: version %s\n", driver_name, DRIVER_VERSION); + + spin_lock_irqsave(&udc->lock, flags); + + seq_printf(s, "vbus %s, pullup %s, %s powered%s, gadget %s\n\n", + udc->vbus ? "present" : "off", + udc->enabled ? (udc->vbus ? "active" : "enabled") : + "disabled", + udc->selfpowered ? "self" : "VBUS", + udc->suspended ? ", suspended" : "", + udc->driver ? udc->driver->driver.name : "(none)"); + + if (udc->enabled && udc->vbus) { + proc_ep_show(s, &udc->ep[0]); + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { + if (ep->desc) + proc_ep_show(s, ep); + } + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int proc_udc_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_udc_show, PDE(inode)->data); +} + +static const struct file_operations proc_ops = { + .owner = THIS_MODULE, + .open = proc_udc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void create_debug_file(struct lpc32xx_udc *udc) +{ + udc->pde = debugfs_create_file(debug_filename, 0, NULL, udc, &proc_ops); +} + +static void remove_debug_file(struct lpc32xx_udc *udc) +{ + if (udc->pde) + debugfs_remove(udc->pde); +} + +#else +static inline void create_debug_file(struct lpc32xx_udc *udc) {} +static inline void remove_debug_file(struct lpc32xx_udc *udc) {} +#endif + +/* Primary initialization sequence for the ISP1301 transceiver */ +static void isp1301_udc_configure(struct lpc32xx_udc *udc) +{ + /* LPC32XX only supports DAT_SE0 USB mode */ + /* This sequence is important */ + + /* Disable transparent UART mode first */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + MC1_UART_EN); + + /* Set full speed and SE0 mode */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_1, (MC1_SPEED_REG | MC1_DAT_SE0)); + + /* + * The PSW_OE enable bit state is reversed in the ISP1301 User's Guide + */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR), ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2, (MC2_BI_DI | MC2_SPD_SUSP_CTRL)); + + /* Driver VBUS_DRV high or low depending on board setup */ + if (udc->board->vbus_drv_pol != 0) + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV); + else + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + OTG1_VBUS_DRV); + + /* Bi-directional mode with suspend control + * Enable both pulldowns for now - the pullup will be enable when VBUS + * is detected */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, + (0 | OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); + + /* Discharge VBUS (just in case) */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DISCHRG); + msleep(1); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + OTG1_VBUS_DISCHRG); + + /* Clear and enable VBUS high edge interrupt */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_FALLING, INT_VBUS_VLD); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_RISING, INT_VBUS_VLD); + + /* Enable usb_need_clk clock after transceiver is initialized */ + writel((readl(USB_CTRL) | (1 << 22)), USB_CTRL); + + dev_info(udc->dev, "ISP1301 Vendor ID : 0x%04x\n", + i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00)); + dev_info(udc->dev, "ISP1301 Product ID : 0x%04x\n", + i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x02)); + dev_info(udc->dev, "ISP1301 Version ID : 0x%04x\n", + i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x14)); +} + +/* Enables or disables the USB device pullup via the ISP1301 transceiver */ +static void isp1301_pullup_set(struct lpc32xx_udc *udc) +{ + if (udc->pullup) + /* Enable pullup for bus signalling */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_DP_PULLUP); + else + /* Enable pullup for bus signalling */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + OTG1_DP_PULLUP); +} + +static void pullup_work(struct work_struct *work) +{ + struct lpc32xx_udc *udc = + container_of(work, struct lpc32xx_udc, pullup_job); + + isp1301_pullup_set(udc); +} + +static void isp1301_pullup_enable(struct lpc32xx_udc *udc, int en_pullup, + int block) +{ + if (en_pullup == udc->pullup) + return; + + udc->pullup = en_pullup; + if (block) + isp1301_pullup_set(udc); + else + /* defer slow i2c pull up setting */ + schedule_work(&udc->pullup_job); +} + +#ifdef CONFIG_PM +/* Powers up or down the ISP1301 transceiver */ +static void isp1301_set_powerstate(struct lpc32xx_udc *udc, int enable) +{ + if (enable != 0) + /* Power up ISP1301 - this ISP1301 will automatically wakeup + when VBUS is detected */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR, + MC2_GLOBAL_PWR_DN); + else + /* Power down ISP1301 */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN); +} + +static void power_work(struct work_struct *work) +{ + struct lpc32xx_udc *udc = + container_of(work, struct lpc32xx_udc, power_job); + + isp1301_set_powerstate(udc, udc->poweron); +} +#endif + +/* + * + * USB protocol engine command/data read/write helper functions + * + */ +/* Issues a single command to the USB device state machine */ +static void udc_protocol_cmd_w(struct lpc32xx_udc *udc, u32 cmd) +{ + u32 pass = 0; + int to; + + /* EP may lock on CLRI if this read isn't done */ + u32 tmp = readl(USBD_DEVINTST(udc->udp_baseaddr)); + (void) tmp; + + while (pass == 0) { + writel(USBD_CCEMPTY, USBD_DEVINTCLR(udc->udp_baseaddr)); + + /* Write command code */ + writel(cmd, USBD_CMDCODE(udc->udp_baseaddr)); + to = 10000; + while (((readl(USBD_DEVINTST(udc->udp_baseaddr)) & + USBD_CCEMPTY) == 0) && (to > 0)) { + to--; + } + + if (to > 0) + pass = 1; + + cpu_relax(); + } +} + +/* Issues 2 commands (or command and data) to the USB device state machine */ +static inline void udc_protocol_cmd_data_w(struct lpc32xx_udc *udc, u32 cmd, + u32 data) +{ + udc_protocol_cmd_w(udc, cmd); + udc_protocol_cmd_w(udc, data); +} + +/* Issues a single command to the USB device state machine and reads + * response data */ +static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd) +{ + u32 tmp; + int to = 1000; + + /* Write a command and read data from the protocol engine */ + writel((USBD_CDFULL | USBD_CCEMPTY), + USBD_DEVINTCLR(udc->udp_baseaddr)); + + /* Write command code */ + udc_protocol_cmd_w(udc, cmd); + + tmp = readl(USBD_DEVINTST(udc->udp_baseaddr)); + while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & USBD_CDFULL)) + && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, + "Protocol engine didn't receive response (CDFULL)\n"); + + return readl(USBD_CMDDATA(udc->udp_baseaddr)); +} + +/* + * + * USB device interrupt mask support functions + * + */ +/* Enable one or more USB device interrupts */ +static inline void uda_enable_devint(struct lpc32xx_udc *udc, u32 devmask) +{ + udc->enabled_devints |= devmask; + writel(udc->enabled_devints, USBD_DEVINTEN(udc->udp_baseaddr)); +} + +/* Disable one or more USB device interrupts */ +static inline void uda_disable_devint(struct lpc32xx_udc *udc, u32 mask) +{ + udc->enabled_devints &= ~mask; + writel(udc->enabled_devints, USBD_DEVINTEN(udc->udp_baseaddr)); +} + +/* Clear one or more USB device interrupts */ +static inline void uda_clear_devint(struct lpc32xx_udc *udc, u32 mask) +{ + writel(mask, USBD_DEVINTCLR(udc->udp_baseaddr)); +} + +/* + * + * Endpoint interrupt disable/enable functions + * + */ +/* Enable one or more USB endpoint interrupts */ +static void uda_enable_hwepint(struct lpc32xx_udc *udc, u32 hwep) +{ + udc->enabled_hwepints |= (1 << hwep); + writel(udc->enabled_hwepints, USBD_EPINTEN(udc->udp_baseaddr)); +} + +/* Disable one or more USB endpoint interrupts */ +static void uda_disable_hwepint(struct lpc32xx_udc *udc, u32 hwep) +{ + udc->enabled_hwepints &= ~(1 << hwep); + writel(udc->enabled_hwepints, USBD_EPINTEN(udc->udp_baseaddr)); +} + +/* Clear one or more USB endpoint interrupts */ +static inline void uda_clear_hwepint(struct lpc32xx_udc *udc, u32 hwep) +{ + writel((1 << hwep), USBD_EPINTCLR(udc->udp_baseaddr)); +} + +/* Enable DMA for the HW channel */ +static inline void udc_ep_dma_enable(struct lpc32xx_udc *udc, u32 hwep) +{ + writel((1 << hwep), USBD_EPDMAEN(udc->udp_baseaddr)); +} + +/* Disable DMA for the HW channel */ +static inline void udc_ep_dma_disable(struct lpc32xx_udc *udc, u32 hwep) +{ + writel((1 << hwep), USBD_EPDMADIS(udc->udp_baseaddr)); +} + +/* + * + * Endpoint realize/unrealize functions + * + */ +/* Before an endpoint can be used, it needs to be realized + * in the USB protocol engine - this realizes the endpoint. + * The interrupt (FIFO or DMA) is not enabled with this function */ +static void udc_realize_hwep(struct lpc32xx_udc *udc, u32 hwep, + u32 maxpacket) +{ + int to = 1000; + + writel(USBD_EP_RLZED, USBD_DEVINTCLR(udc->udp_baseaddr)); + writel(hwep, USBD_EPIND(udc->udp_baseaddr)); + udc->realized_eps |= (1 << hwep); + writel(udc->realized_eps, USBD_REEP(udc->udp_baseaddr)); + writel(maxpacket, USBD_EPMAXPSIZE(udc->udp_baseaddr)); + + /* Wait until endpoint is realized in hardware */ + while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & + USBD_EP_RLZED)) && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, "EP not correctly realized in hardware\n"); + + writel(USBD_EP_RLZED, USBD_DEVINTCLR(udc->udp_baseaddr)); +} + +/* Unrealize an EP */ +static void udc_unrealize_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc->realized_eps &= ~(1 << hwep); + writel(udc->realized_eps, USBD_REEP(udc->udp_baseaddr)); +} + +/* + * + * Endpoint support functions + * + */ +/* Select and clear endpoint interrupt */ +static u32 udc_selep_clrint(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_w(udc, CMD_SEL_EP_CLRI(hwep)); + return udc_protocol_cmd_r(udc, DAT_SEL_EP_CLRI(hwep)); +} + +/* Disables the endpoint in the USB protocol engine */ +static void udc_disable_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep), + DAT_WR_BYTE(EP_STAT_DA)); +} + +/* Stalls the endpoint - endpoint will return STALL */ +static void udc_stall_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep), + DAT_WR_BYTE(EP_STAT_ST)); +} + +/* Clear stall or reset endpoint */ +static void udc_clrstall_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep), + DAT_WR_BYTE(0)); +} + +/* Select an endpoint for endpoint status, clear, validate */ +static void udc_select_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_protocol_cmd_w(udc, CMD_SEL_EP(hwep)); +} + +/* + * + * Endpoint buffer management functions + * + */ +/* Clear the current endpoint's buffer */ +static void udc_clr_buffer_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_select_hwep(udc, hwep); + udc_protocol_cmd_w(udc, CMD_CLR_BUF); +} + +/* Validate the current endpoint's buffer */ +static void udc_val_buffer_hwep(struct lpc32xx_udc *udc, u32 hwep) +{ + udc_select_hwep(udc, hwep); + udc_protocol_cmd_w(udc, CMD_VALID_BUF); +} + +static inline u32 udc_clearep_getsts(struct lpc32xx_udc *udc, u32 hwep) +{ + /* Clear EP interrupt */ + uda_clear_hwepint(udc, hwep); + return udc_selep_clrint(udc, hwep); +} + +/* + * + * USB EP DMA support + * + */ +/* Allocate a DMA Descriptor */ +static struct lpc32xx_usbd_dd_gad *udc_dd_alloc(struct lpc32xx_udc *udc) +{ + dma_addr_t dma; + struct lpc32xx_usbd_dd_gad *dd; + + dd = (struct lpc32xx_usbd_dd_gad *) dma_pool_alloc( + udc->dd_cache, (GFP_KERNEL | GFP_DMA), &dma); + if (dd) + dd->this_dma = dma; + + return dd; +} + +/* Free a DMA Descriptor */ +static void udc_dd_free(struct lpc32xx_udc *udc, struct lpc32xx_usbd_dd_gad *dd) +{ + dma_pool_free(udc->dd_cache, dd, dd->this_dma); +} + +/* + * + * USB setup and shutdown functions + * + */ +/* Enables or disables most of the USB system clocks when low power mode is + * needed. Clocks are typically started on a connection event, and disabled + * when a cable is disconnected */ +#define OTGOFF_CLK_MASK (AHB_M_CLOCK_ON | I2C_CLOCK_ON) +static void udc_clk_set(struct lpc32xx_udc *udc, int enable) +{ + int to = 1000; + + if (enable != 0) { + if (udc->clocked) + return; + + udc->clocked = 1; + + /* 48MHz PLL up */ + clk_enable(udc->usb_pll_clk); + + /* Enable the USB device clock */ + writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN, + USB_CTRL); + + /* Set to enable all needed USB OTG clocks */ + writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc)); + + while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) != + USB_CLOCK_MASK) && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, "Cannot enable USB OTG clocking\n"); + } else { + if (!udc->clocked) + return; + + udc->clocked = 0; + + /* Never disable the USB_HCLK during normal operation */ + + /* 48MHz PLL dpwn */ + clk_disable(udc->usb_pll_clk); + + /* Enable the USB device clock */ + writel(readl(USB_CTRL) & ~USB_DEV_NEED_CLK_EN, + USB_CTRL); + + /* Set to enable all needed USB OTG clocks */ + writel(OTGOFF_CLK_MASK, USB_OTG_CLK_CTRL(udc)); + + while (((readl(USB_OTG_CLK_STAT(udc)) & + OTGOFF_CLK_MASK) != + OTGOFF_CLK_MASK) && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, "Cannot disable USB OTG clocking\n"); + } +} + +/* Set/reset USB device address */ +static void udc_set_address(struct lpc32xx_udc *udc, u32 addr) +{ + /* Address will be latched at the end of the status phase, or + latched immediately if function is called twice */ + udc_protocol_cmd_data_w(udc, CMD_SET_ADDR, + DAT_WR_BYTE(DEV_EN | addr)); +} + +/* Setup up a IN request for DMA transfer - this consists of determining the + * list of DMA addresses for the transfer, allocating DMA Descriptors, + * installing the DD into the UDCA, and then enabling the DMA for that EP */ +static int udc_ep_in_req_dma(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + struct lpc32xx_request *req; + u32 hwep = ep->hwep_num; + + ep->req_pending = 1; + + /* There will always be a request waiting here */ + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + + /* Place the DD Descriptor into the UDCA */ + udc->udca_v_base[hwep] = req->dd_desc_ptr->this_dma; + + /* Enable DMA and interrupt for the HW EP */ + udc_ep_dma_enable(udc, hwep); + + /* Clear ZLP if last packet is not of MAXP size */ + if (req->req.length % ep->ep.maxpacket) + req->send_zlp = 0; + + return 0; +} + +/* Setup up a OUT request for DMA transfer - this consists of determining the + * list of DMA addresses for the transfer, allocating DMA Descriptors, + * installing the DD into the UDCA, and then enabling the DMA for that EP */ +static int udc_ep_out_req_dma(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + struct lpc32xx_request *req; + u32 hwep = ep->hwep_num; + + ep->req_pending = 1; + + /* There will always be a request waiting here */ + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + + /* Place the DD Descriptor into the UDCA */ + udc->udca_v_base[hwep] = req->dd_desc_ptr->this_dma; + + /* Enable DMA and interrupt for the HW EP */ + udc_ep_dma_enable(udc, hwep); + return 0; +} + +static void udc_disable(struct lpc32xx_udc *udc) +{ + u32 i; + + /* Disable device */ + udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(0)); + udc_protocol_cmd_data_w(udc, CMD_SET_DEV_STAT, DAT_WR_BYTE(0)); + + /* Disable all device interrupts (including EP0) */ + uda_disable_devint(udc, 0x3FF); + + /* Disable and reset all endpoint interrupts */ + for (i = 0; i < 32; i++) { + uda_disable_hwepint(udc, i); + uda_clear_hwepint(udc, i); + udc_disable_hwep(udc, i); + udc_unrealize_hwep(udc, i); + udc->udca_v_base[i] = 0; + + /* Disable and clear all interrupts and DMA */ + udc_ep_dma_disable(udc, i); + writel((1 << i), USBD_EOTINTCLR(udc->udp_baseaddr)); + writel((1 << i), USBD_NDDRTINTCLR(udc->udp_baseaddr)); + writel((1 << i), USBD_SYSERRTINTCLR(udc->udp_baseaddr)); + writel((1 << i), USBD_DMARCLR(udc->udp_baseaddr)); + } + + /* Disable DMA interrupts */ + writel(0, USBD_DMAINTEN(udc->udp_baseaddr)); + + writel(0, USBD_UDCAH(udc->udp_baseaddr)); +} + +static void udc_enable(struct lpc32xx_udc *udc) +{ + u32 i; + struct lpc32xx_ep *ep = &udc->ep[0]; + + /* Start with known state */ + udc_disable(udc); + + /* Enable device */ + udc_protocol_cmd_data_w(udc, CMD_SET_DEV_STAT, DAT_WR_BYTE(DEV_CON)); + + /* EP interrupts on high priority, FRAME interrupt on low priority */ + writel(USBD_EP_FAST, USBD_DEVINTPRI(udc->udp_baseaddr)); + writel(0xFFFF, USBD_EPINTPRI(udc->udp_baseaddr)); + + /* Clear any pending device interrupts */ + writel(0x3FF, USBD_DEVINTCLR(udc->udp_baseaddr)); + + /* Setup UDCA - not yet used (DMA) */ + writel(udc->udca_p_base, USBD_UDCAH(udc->udp_baseaddr)); + + /* Only enable EP0 in and out for now, EP0 only works in FIFO mode */ + for (i = 0; i <= 1; i++) { + udc_realize_hwep(udc, i, ep->ep.maxpacket); + uda_enable_hwepint(udc, i); + udc_select_hwep(udc, i); + udc_clrstall_hwep(udc, i); + udc_clr_buffer_hwep(udc, i); + } + + /* Device interrupt setup */ + uda_clear_devint(udc, (USBD_ERR_INT | USBD_DEV_STAT | USBD_EP_SLOW | + USBD_EP_FAST)); + uda_enable_devint(udc, (USBD_ERR_INT | USBD_DEV_STAT | USBD_EP_SLOW | + USBD_EP_FAST)); + + /* Set device address to 0 - called twice to force a latch in the USB + engine without the need of a setup packet status closure */ + udc_set_address(udc, 0); + udc_set_address(udc, 0); + + /* Enable master DMA interrupts */ + writel((USBD_SYS_ERR_INT | USBD_EOT_INT), + USBD_DMAINTEN(udc->udp_baseaddr)); + + udc->dev_status = 0; +} + +/* + * + * USB device board specific events handled via callbacks + * + */ +/* Connection change event - notify board function of change */ +static void uda_power_event(struct lpc32xx_udc *udc, u32 conn) +{ + /* Just notify of a connection change event (optional) */ + if (udc->board->conn_chgb != NULL) + udc->board->conn_chgb(conn); +} + +/* Suspend/resume event - notify board function of change */ +static void uda_resm_susp_event(struct lpc32xx_udc *udc, u32 conn) +{ + /* Just notify of a Suspend/resume change event (optional) */ + if (udc->board->susp_chgb != NULL) + udc->board->susp_chgb(conn); + + if (conn) + udc->suspended = 0; + else + udc->suspended = 1; +} + +/* Remote wakeup enable/disable - notify board function of change */ +static void uda_remwkp_cgh(struct lpc32xx_udc *udc) +{ + if (udc->board->rmwk_chgb != NULL) + udc->board->rmwk_chgb(udc->dev_status & + (1 << USB_DEVICE_REMOTE_WAKEUP)); +} + +/* Reads data from FIFO, adjusts for alignment and data size */ +static void udc_pop_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes) +{ + int n, i, bl; + u16 *p16; + u32 *p32, tmp, cbytes; + + /* Use optimal data transfer method based on source address and size */ + switch (((u32) data) & 0x3) { + case 0: /* 32-bit aligned */ + p32 = (u32 *) data; + cbytes = (bytes & ~0x3); + + /* Copy 32-bit aligned data first */ + for (n = 0; n < cbytes; n += 4) + *p32++ = readl(USBD_RXDATA(udc->udp_baseaddr)); + + /* Handle any remaining bytes */ + bl = bytes - cbytes; + if (bl) { + tmp = readl(USBD_RXDATA(udc->udp_baseaddr)); + for (n = 0; n < bl; n++) + data[cbytes + n] = ((tmp >> (n * 8)) & 0xFF); + + } + break; + + case 1: /* 8-bit aligned */ + case 3: + /* Each byte has to be handled independently */ + for (n = 0; n < bytes; n += 4) { + tmp = readl(USBD_RXDATA(udc->udp_baseaddr)); + + bl = bytes - n; + if (bl > 3) + bl = 3; + + for (i = 0; i < bl; i++) + data[n + i] = (u8) ((tmp >> (n * 8)) & 0xFF); + } + break; + + case 2: /* 16-bit aligned */ + p16 = (u16 *) data; + cbytes = (bytes & ~0x3); + + /* Copy 32-bit sized objects first with 16-bit alignment */ + for (n = 0; n < cbytes; n += 4) { + tmp = readl(USBD_RXDATA(udc->udp_baseaddr)); + *p16++ = (u16)(tmp & 0xFFFF); + *p16++ = (u16)((tmp >> 16) & 0xFFFF); + } + + /* Handle any remaining bytes */ + bl = bytes - cbytes; + if (bl) { + tmp = readl(USBD_RXDATA(udc->udp_baseaddr)); + for (n = 0; n < bl; n++) + data[cbytes + n] = ((tmp >> (n * 8)) & 0xFF); + } + break; + } +} + +/* Read data from the FIFO for an endpoint. This function is for endpoints (such + * as EP0) that don't use DMA. This function should only be called if a packet + * is known to be ready to read for the endpoint. Note that the endpoint must + * be selected in the protocol engine prior to this call. */ +static u32 udc_read_hwep(struct lpc32xx_udc *udc, u32 hwep, u32 *data, + u32 bytes) +{ + u32 tmpv; + int to = 1000; + u32 tmp, hwrep = ((hwep & 0x1E) << 1) | CTRL_RD_EN; + + /* Setup read of endpoint */ + writel(hwrep, USBD_CTRL(udc->udp_baseaddr)); + + /* Wait until packet is ready */ + while ((((tmpv = readl(USBD_RXPLEN(udc->udp_baseaddr))) & + PKT_RDY) == 0) && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, "No packet ready on FIFO EP read\n"); + + /* Mask out count */ + tmp = tmpv & PKT_LNGTH_MASK; + if (bytes < tmp) + tmp = bytes; + + if ((tmp > 0) && (data != NULL)) + udc_pop_fifo(udc, (u8 *) data, tmp); + + writel(((hwep & 0x1E) << 1), USBD_CTRL(udc->udp_baseaddr)); + + /* Clear the buffer */ + udc_clr_buffer_hwep(udc, hwep); + + return tmp; +} + +/* Stuffs data into the FIFO, adjusts for alignment and data size */ +static void udc_stuff_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes) +{ + int n, i, bl; + u16 *p16; + u32 *p32, tmp, cbytes; + + /* Use optimal data transfer method based on source address and size */ + switch (((u32) data) & 0x3) { + case 0: /* 32-bit aligned */ + p32 = (u32 *) data; + cbytes = (bytes & ~0x3); + + /* Copy 32-bit aligned data first */ + for (n = 0; n < cbytes; n += 4) + writel(*p32++, USBD_TXDATA(udc->udp_baseaddr)); + + /* Handle any remaining bytes */ + bl = bytes - cbytes; + if (bl) { + tmp = 0; + for (n = 0; n < bl; n++) + tmp |= data[cbytes + n] << (n * 8); + + writel(tmp, USBD_TXDATA(udc->udp_baseaddr)); + } + break; + + case 1: /* 8-bit aligned */ + case 3: + /* Each byte has to be handled independently */ + for (n = 0; n < bytes; n += 4) { + bl = bytes - n; + if (bl > 4) + bl = 4; + + tmp = 0; + for (i = 0; i < bl; i++) + tmp |= data[n + i] << (i * 8); + + writel(tmp, USBD_TXDATA(udc->udp_baseaddr)); + } + break; + + case 2: /* 16-bit aligned */ + p16 = (u16 *) data; + cbytes = (bytes & ~0x3); + + /* Copy 32-bit aligned data first */ + for (n = 0; n < cbytes; n += 4) { + tmp = *p16++ & 0xFFFF; + tmp |= (*p16++ & 0xFFFF) << 16; + writel(tmp, USBD_TXDATA(udc->udp_baseaddr)); + } + + /* Handle any remaining bytes */ + bl = bytes - cbytes; + if (bl) { + tmp = 0; + for (n = 0; n < bl; n++) + tmp |= data[cbytes + n] << (n * 8); + + writel(tmp, USBD_TXDATA(udc->udp_baseaddr)); + } + break; + } +} + +/* Write data to the FIFO for an endpoint. This function is for endpoints (such + * as EP0) that don't use DMA. Note that the endpoint must be selected in the + * protocol engine prior to this call. */ +static void udc_write_hwep(struct lpc32xx_udc *udc, u32 hwep, u32 *data, + u32 bytes) +{ + u32 hwwep = ((hwep & 0x1E) << 1) | CTRL_WR_EN; + + if ((bytes > 0) && (data == NULL)) + return; + + /* Setup write of endpoint */ + writel(hwwep, USBD_CTRL(udc->udp_baseaddr)); + + writel(bytes, USBD_TXPLEN(udc->udp_baseaddr)); + + /* Need at least 1 byte to trigger TX */ + if (bytes == 0) + writel(0, USBD_TXDATA(udc->udp_baseaddr)); + else + udc_stuff_fifo(udc, (u8 *) data, bytes); + + writel(((hwep & 0x1E) << 1), USBD_CTRL(udc->udp_baseaddr)); + + udc_val_buffer_hwep(udc, hwep); +} + +/* USB device reset - resets USB to a default state with just EP0 + enabled */ +static void uda_usb_reset(struct lpc32xx_udc *udc) +{ + u32 i = 0; + /* Re-init device controller and EP0 */ + udc_enable(udc); + udc->gadget.speed = USB_SPEED_FULL; + + for (i = 1; i < NUM_ENDPOINTS; i++) { + struct lpc32xx_ep *ep = &udc->ep[i]; + ep->req_pending = 0; + } +} + +/* Send a ZLP on EP0 */ +static void udc_ep0_send_zlp(struct lpc32xx_udc *udc) +{ + udc_write_hwep(udc, EP_IN, NULL, 0); +} + +/* Get current frame number */ +static u16 udc_get_current_frame(struct lpc32xx_udc *udc) +{ + u16 flo, fhi; + + udc_protocol_cmd_w(udc, CMD_RD_FRAME); + flo = (u16) udc_protocol_cmd_r(udc, DAT_RD_FRAME); + fhi = (u16) udc_protocol_cmd_r(udc, DAT_RD_FRAME); + + return (fhi << 8) | flo; +} + +/* Set the device as configured - enables all endpoints */ +static inline void udc_set_device_configured(struct lpc32xx_udc *udc) +{ + udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(CONF_DVICE)); +} + +/* Set the device as unconfigured - disables all endpoints */ +static inline void udc_set_device_unconfigured(struct lpc32xx_udc *udc) +{ + udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(0)); +} + +/* reinit == restore initial software state */ +static void udc_reinit(struct lpc32xx_udc *udc) +{ + u32 i; + + INIT_LIST_HEAD(&udc->gadget.ep_list); + INIT_LIST_HEAD(&udc->gadget.ep0->ep_list); + + for (i = 0; i < NUM_ENDPOINTS; i++) { + struct lpc32xx_ep *ep = &udc->ep[i]; + + if (i != 0) + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + ep->desc = NULL; + ep->ep.maxpacket = ep->maxpacket; + INIT_LIST_HEAD(&ep->queue); + ep->req_pending = 0; + } + + udc->ep0state = WAIT_FOR_SETUP; +} + +/* Must be called with lock */ +static void done(struct lpc32xx_ep *ep, struct lpc32xx_request *req, int status) +{ + struct lpc32xx_udc *udc = ep->udc; + + list_del_init(&req->queue); + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + if (ep->lep) { + enum dma_data_direction direction; + + if (ep->is_in) + direction = DMA_TO_DEVICE; + else + direction = DMA_FROM_DEVICE; + + if (req->mapped) { + dma_unmap_single(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + direction); + req->req.dma = 0; + req->mapped = 0; + } else + dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + direction); + + /* Free DDs */ + udc_dd_free(udc, req->dd_desc_ptr); + } + + if (status && status != -ESHUTDOWN) + ep_dbg(ep, "%s done %p, status %d\n", ep->ep.name, req, status); + + ep->req_pending = 0; + spin_unlock(&udc->lock); + req->req.complete(&ep->ep, &req->req); + spin_lock(&udc->lock); +} + +/* Must be called with lock */ +static void nuke(struct lpc32xx_ep *ep, int status) +{ + struct lpc32xx_request *req; + + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + done(ep, req, status); + } + + if (ep->desc && status == -ESHUTDOWN) { + uda_disable_hwepint(ep->udc, ep->hwep_num); + udc_disable_hwep(ep->udc, ep->hwep_num); + } +} + +/* IN endpoint 0 transfer */ +static int udc_ep0_in_req(struct lpc32xx_udc *udc) +{ + struct lpc32xx_request *req; + struct lpc32xx_ep *ep0 = &udc->ep[0]; + u32 tsend, ts = 0; + + if (list_empty(&ep0->queue)) + /* Nothing to send */ + return 0; + else + req = list_entry(ep0->queue.next, struct lpc32xx_request, + queue); + + tsend = ts = req->req.length - req->req.actual; + if (ts == 0) { + /* Send a ZLP */ + udc_ep0_send_zlp(udc); + done(ep0, req, 0); + return 1; + } else if (ts > ep0->ep.maxpacket) + ts = ep0->ep.maxpacket; /* Just send what we can */ + + /* Write data to the EP0 FIFO and start transfer */ + udc_write_hwep(udc, EP_IN, (req->req.buf + req->req.actual), ts); + + /* Increment data pointer */ + req->req.actual += ts; + + if (tsend >= ep0->ep.maxpacket) + return 0; /* Stay in data transfer state */ + + /* Transfer request is complete */ + udc->ep0state = WAIT_FOR_SETUP; + done(ep0, req, 0); + return 1; +} + +/* OUT endpoint 0 transfer */ +static int udc_ep0_out_req(struct lpc32xx_udc *udc) +{ + struct lpc32xx_request *req; + struct lpc32xx_ep *ep0 = &udc->ep[0]; + u32 tr, bufferspace; + + if (list_empty(&ep0->queue)) + return 0; + else + req = list_entry(ep0->queue.next, struct lpc32xx_request, + queue); + + if (req) { + if (req->req.length == 0) { + /* Just dequeue request */ + done(ep0, req, 0); + udc->ep0state = WAIT_FOR_SETUP; + return 1; + } + + /* Get data from FIFO */ + bufferspace = req->req.length - req->req.actual; + if (bufferspace > ep0->ep.maxpacket) + bufferspace = ep0->ep.maxpacket; + + /* Copy data to buffer */ + prefetchw(req->req.buf + req->req.actual); + tr = udc_read_hwep(udc, EP_OUT, req->req.buf + req->req.actual, + bufferspace); + req->req.actual += bufferspace; + + if (tr < ep0->ep.maxpacket) { + /* This is the last packet */ + done(ep0, req, 0); + udc->ep0state = WAIT_FOR_SETUP; + return 1; + } + } + + return 0; +} + +/* Must be called with lock */ +static void stop_activity(struct lpc32xx_udc *udc) +{ + struct usb_gadget_driver *driver = udc->driver; + int i; + + if (udc->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->suspended = 0; + + for (i = 0; i < NUM_ENDPOINTS; i++) { + struct lpc32xx_ep *ep = &udc->ep[i]; + nuke(ep, -ESHUTDOWN); + } + if (driver) { + spin_unlock(&udc->lock); + driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); + } + + isp1301_pullup_enable(udc, 0, 0); + udc_disable(udc); + udc_reinit(udc); +} + +/* + * Activate or kill host pullup + * Can be called with or without lock + */ +static void pullup(struct lpc32xx_udc *udc, int is_on) +{ + if (!udc->clocked) + return; + + if (!udc->enabled || !udc->vbus) + is_on = 0; + + if (is_on != udc->pullup) + isp1301_pullup_enable(udc, is_on, 0); +} + +/* Must be called without lock */ +static int lpc32xx_ep_disable(struct usb_ep *_ep) +{ + struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); + struct lpc32xx_udc *udc = ep->udc; + unsigned long flags; + + if ((ep->hwep_num_base == 0) || (ep->hwep_num == 0)) + return -EINVAL; + spin_lock_irqsave(&udc->lock, flags); + + nuke(ep, -ESHUTDOWN); + + /* restore the endpoint's pristine config */ + ep->desc = NULL; + + /* Clear all DMA statuses for this EP */ + udc_ep_dma_disable(udc, ep->hwep_num); + writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_NDDRTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_SYSERRTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_DMARCLR(udc->udp_baseaddr)); + + /* Remove the DD pointer in the UDCA */ + udc->udca_v_base[ep->hwep_num] = 0; + + /* Disable and reset endpoint and interrupt */ + uda_clear_hwepint(udc, ep->hwep_num); + udc_unrealize_hwep(udc, ep->hwep_num); + + ep->hwep_num = 0; + + spin_unlock_irqrestore(&udc->lock, flags); + + atomic_dec(&udc->enabled_ep_cnt); + wake_up(&udc->ep_disable_wait_queue); + + return 0; +} + +/* Must be called without lock */ +static int lpc32xx_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); + struct lpc32xx_udc *udc = ep->udc; + u16 maxpacket; + u32 tmp; + unsigned long flags; + + /* Verify EP data */ + if ((!_ep) || (!ep) || (!desc) || (ep->desc) || + (desc->bDescriptorType != USB_DT_ENDPOINT)) { + dev_dbg(udc->dev, "bad ep or descriptor\n"); + return -EINVAL; + } + maxpacket = usb_endpoint_maxp(desc); + if ((maxpacket == 0) || (maxpacket > ep->maxpacket)) { + dev_dbg(udc->dev, "bad ep descriptor's packet size\n"); + return -EINVAL; + } + + /* Don't touch EP0 */ + if (ep->hwep_num_base == 0) { + dev_dbg(udc->dev, "Can't re-enable EP0!!!\n"); + return -EINVAL; + } + + /* Is driver ready? */ + if ((!udc->driver) || (udc->gadget.speed == USB_SPEED_UNKNOWN)) { + dev_dbg(udc->dev, "bogus device state\n"); + return -ESHUTDOWN; + } + + tmp = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + switch (tmp) { + case USB_ENDPOINT_XFER_CONTROL: + return -EINVAL; + + case USB_ENDPOINT_XFER_INT: + if (maxpacket > ep->maxpacket) { + dev_dbg(udc->dev, + "Bad INT endpoint maxpacket %d\n", maxpacket); + return -EINVAL; + } + break; + + case USB_ENDPOINT_XFER_BULK: + switch (maxpacket) { + case 8: + case 16: + case 32: + case 64: + break; + + default: + dev_dbg(udc->dev, + "Bad BULK endpoint maxpacket %d\n", maxpacket); + return -EINVAL; + } + break; + + case USB_ENDPOINT_XFER_ISOC: + break; + } + spin_lock_irqsave(&udc->lock, flags); + + /* Initialize endpoint to match the selected descriptor */ + ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0; + ep->desc = desc; + ep->ep.maxpacket = maxpacket; + + /* Map hardware endpoint from base and direction */ + if (ep->is_in) + /* IN endpoints are offset 1 from the OUT endpoint */ + ep->hwep_num = ep->hwep_num_base + EP_IN; + else + ep->hwep_num = ep->hwep_num_base; + + ep_dbg(ep, "EP enabled: %s, HW:%d, MP:%d IN:%d\n", ep->ep.name, + ep->hwep_num, maxpacket, (ep->is_in == 1)); + + /* Realize the endpoint, interrupt is enabled later when + * buffers are queued, IN EPs will NAK until buffers are ready */ + udc_realize_hwep(udc, ep->hwep_num, ep->ep.maxpacket); + udc_clr_buffer_hwep(udc, ep->hwep_num); + uda_disable_hwepint(udc, ep->hwep_num); + udc_clrstall_hwep(udc, ep->hwep_num); + + /* Clear all DMA statuses for this EP */ + udc_ep_dma_disable(udc, ep->hwep_num); + writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_NDDRTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_SYSERRTINTCLR(udc->udp_baseaddr)); + writel(1 << ep->hwep_num, USBD_DMARCLR(udc->udp_baseaddr)); + + spin_unlock_irqrestore(&udc->lock, flags); + + atomic_inc(&udc->enabled_ep_cnt); + return 0; +} + +/* + * Allocate a USB request list + * Can be called with or without lock + */ +static struct usb_request *lpc32xx_ep_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct lpc32xx_request *req; + + req = kzalloc(sizeof(struct lpc32xx_request), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + return &req->req; +} + +/* + * De-allocate a USB request list + * Can be called with or without lock + */ +static void lpc32xx_ep_free_request(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct lpc32xx_request *req; + + req = container_of(_req, struct lpc32xx_request, req); + BUG_ON(!list_empty(&req->queue)); + kfree(req); +} + +/* Must be called without lock */ +static int lpc32xx_ep_queue(struct usb_ep *_ep, + struct usb_request *_req, gfp_t gfp_flags) +{ + struct lpc32xx_request *req; + struct lpc32xx_ep *ep; + struct lpc32xx_udc *udc; + unsigned long flags; + int status = 0; + + req = container_of(_req, struct lpc32xx_request, req); + ep = container_of(_ep, struct lpc32xx_ep, ep); + + if (!_req || !_req->complete || !_req->buf || + !list_empty(&req->queue)) + return -EINVAL; + + udc = ep->udc; + + if (!_ep || (!ep->desc && ep->hwep_num_base != 0)) { + dev_dbg(udc->dev, "invalid ep\n"); + return -EINVAL; + } + + + if ((!udc) || (!udc->driver) || + (udc->gadget.speed == USB_SPEED_UNKNOWN)) { + dev_dbg(udc->dev, "invalid device\n"); + return -EINVAL; + } + + if (ep->lep) { + enum dma_data_direction direction; + struct lpc32xx_usbd_dd_gad *dd; + + /* Map DMA pointer */ + if (ep->is_in) + direction = DMA_TO_DEVICE; + else + direction = DMA_FROM_DEVICE; + + if (req->req.dma == 0) { + req->req.dma = dma_map_single( + ep->udc->gadget.dev.parent, + req->req.buf, req->req.length, direction); + req->mapped = 1; + } else { + dma_sync_single_for_device( + ep->udc->gadget.dev.parent, req->req.dma, + req->req.length, direction); + req->mapped = 0; + } + + /* For the request, build a list of DDs */ + dd = udc_dd_alloc(udc); + if (!dd) { + /* Error allocating DD */ + return -ENOMEM; + } + req->dd_desc_ptr = dd; + + /* Setup the DMA descriptor */ + dd->dd_next_phy = dd->dd_next_v = 0; + dd->dd_buffer_addr = req->req.dma; + dd->dd_status = 0; + + /* Special handling for ISO EPs */ + if (ep->eptype == EP_ISO_TYPE) { + dd->dd_setup = DD_SETUP_ISO_EP | + DD_SETUP_PACKETLEN(0) | + DD_SETUP_DMALENBYTES(1); + dd->dd_iso_ps_mem_addr = dd->this_dma + 24; + if (ep->is_in) + dd->iso_status[0] = req->req.length; + else + dd->iso_status[0] = 0; + } else + dd->dd_setup = DD_SETUP_PACKETLEN(ep->ep.maxpacket) | + DD_SETUP_DMALENBYTES(req->req.length); + } + + ep_dbg(ep, "%s queue req %p len %d buf %p (in=%d) z=%d\n", _ep->name, + _req, _req->length, _req->buf, ep->is_in, _req->zero); + + spin_lock_irqsave(&udc->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + req->send_zlp = _req->zero; + + /* Kickstart empty queues */ + if (list_empty(&ep->queue)) { + list_add_tail(&req->queue, &ep->queue); + + if (ep->hwep_num_base == 0) { + /* Handle expected data direction */ + if (ep->is_in) { + /* IN packet to host */ + udc->ep0state = DATA_IN; + status = udc_ep0_in_req(udc); + } else { + /* OUT packet from host */ + udc->ep0state = DATA_OUT; + status = udc_ep0_out_req(udc); + } + } else if (ep->is_in) { + /* IN packet to host and kick off transfer */ + if (!ep->req_pending) + udc_ep_in_req_dma(udc, ep); + } else + /* OUT packet from host and kick off list */ + if (!ep->req_pending) + udc_ep_out_req_dma(udc, ep); + } else + list_add_tail(&req->queue, &ep->queue); + + spin_unlock_irqrestore(&udc->lock, flags); + + return (status < 0) ? status : 0; +} + +/* Must be called without lock */ +static int lpc32xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct lpc32xx_ep *ep; + struct lpc32xx_request *req; + unsigned long flags; + + ep = container_of(_ep, struct lpc32xx_ep, ep); + if (!_ep || ep->hwep_num_base == 0) + return -EINVAL; + + spin_lock_irqsave(&ep->udc->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + spin_unlock_irqrestore(&ep->udc->lock, flags); + return -EINVAL; + } + + done(ep, req, -ECONNRESET); + + spin_unlock_irqrestore(&ep->udc->lock, flags); + + return 0; +} + +/* Must be called without lock */ +static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); + struct lpc32xx_udc *udc = ep->udc; + unsigned long flags; + + if ((!ep) || (ep->desc == NULL) || (ep->hwep_num <= 1)) + return -EINVAL; + + /* Don't halt an IN EP */ + if (ep->is_in) + return -EAGAIN; + + spin_lock_irqsave(&udc->lock, flags); + + if (value == 1) { + /* stall */ + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(ep->hwep_num), + DAT_WR_BYTE(EP_STAT_ST)); + } else { + /* End stall */ + ep->wedge = 0; + udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(ep->hwep_num), + DAT_WR_BYTE(0)); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/* set the halt feature and ignores clear requests */ +static int lpc32xx_ep_set_wedge(struct usb_ep *_ep) +{ + struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); + + if (!_ep || !ep->udc) + return -EINVAL; + + ep->wedge = 1; + + return usb_ep_set_halt(_ep); +} + +static const struct usb_ep_ops lpc32xx_ep_ops = { + .enable = lpc32xx_ep_enable, + .disable = lpc32xx_ep_disable, + .alloc_request = lpc32xx_ep_alloc_request, + .free_request = lpc32xx_ep_free_request, + .queue = lpc32xx_ep_queue, + .dequeue = lpc32xx_ep_dequeue, + .set_halt = lpc32xx_ep_set_halt, + .set_wedge = lpc32xx_ep_set_wedge, +}; + +/* Send a ZLP on a non-0 IN EP */ +void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + /* Clear EP status */ + udc_clearep_getsts(udc, ep->hwep_num); + + /* Send ZLP via FIFO mechanism */ + udc_write_hwep(udc, ep->hwep_num, NULL, 0); +} + +/* + * Handle EP completion for ZLP + * This function will only be called when a delayed ZLP needs to be sent out + * after a DMA transfer has filled both buffers. + */ +void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + u32 epstatus; + struct lpc32xx_request *req; + + if (ep->hwep_num <= 0) + return; + + uda_clear_hwepint(udc, ep->hwep_num); + + /* If this interrupt isn't enabled, return now */ + if (!(udc->enabled_hwepints & (1 << ep->hwep_num))) + return; + + /* Get endpoint status */ + epstatus = udc_clearep_getsts(udc, ep->hwep_num); + + /* + * This should never happen, but protect against writing to the + * buffer when full. + */ + if (epstatus & EP_SEL_F) + return; + + if (ep->is_in) { + udc_send_in_zlp(udc, ep); + uda_disable_hwepint(udc, ep->hwep_num); + } else + return; + + /* If there isn't a request waiting, something went wrong */ + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + if (req) { + done(ep, req, 0); + + /* Start another request if ready */ + if (!list_empty(&ep->queue)) { + if (ep->is_in) + udc_ep_in_req_dma(udc, ep); + else + udc_ep_out_req_dma(udc, ep); + } else + ep->req_pending = 0; + } +} + + +/* DMA end of transfer completion */ +static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) +{ + u32 status, epstatus; + struct lpc32xx_request *req; + struct lpc32xx_usbd_dd_gad *dd; + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + ep->totalints++; +#endif + + req = list_entry(ep->queue.next, struct lpc32xx_request, queue); + if (!req) { + ep_err(ep, "DMA interrupt on no req!\n"); + return; + } + dd = req->dd_desc_ptr; + + /* DMA descriptor should always be retired for this call */ + if (!(dd->dd_status & DD_STATUS_DD_RETIRED)) + ep_warn(ep, "DMA descriptor did not retire\n"); + + /* Disable DMA */ + udc_ep_dma_disable(udc, ep->hwep_num); + writel((1 << ep->hwep_num), USBD_EOTINTCLR(udc->udp_baseaddr)); + writel((1 << ep->hwep_num), USBD_NDDRTINTCLR(udc->udp_baseaddr)); + + /* System error? */ + if (readl(USBD_SYSERRTINTST(udc->udp_baseaddr)) & + (1 << ep->hwep_num)) { + writel((1 << ep->hwep_num), + USBD_SYSERRTINTCLR(udc->udp_baseaddr)); + ep_err(ep, "AHB critical error!\n"); + ep->req_pending = 0; + + /* The error could have occurred on a packet of a multipacket + * transfer, so recovering the transfer is not possible. Close + * the request with an error */ + done(ep, req, -ECONNABORTED); + return; + } + + /* Handle the current DD's status */ + status = dd->dd_status; + switch (status & DD_STATUS_STS_MASK) { + case DD_STATUS_STS_NS: + /* DD not serviced? This shouldn't happen! */ + ep->req_pending = 0; + ep_err(ep, "DMA critical EP error: DD not serviced (0x%x)!\n", + status); + + done(ep, req, -ECONNABORTED); + return; + + case DD_STATUS_STS_BS: + /* Interrupt only fires on EOT - This shouldn't happen! */ + ep->req_pending = 0; + ep_err(ep, "DMA critical EP error: EOT prior to service completion (0x%x)!\n", + status); + done(ep, req, -ECONNABORTED); + return; + + case DD_STATUS_STS_NC: + case DD_STATUS_STS_DUR: + /* Really just a short packet, not an underrun */ + /* This is a good status and what we expect */ + break; + + default: + /* Data overrun, system error, or unknown */ + ep->req_pending = 0; + ep_err(ep, "DMA critical EP error: System error (0x%x)!\n", + status); + done(ep, req, -ECONNABORTED); + return; + } + + /* ISO endpoints are handled differently */ + if (ep->eptype == EP_ISO_TYPE) { + if (ep->is_in) + req->req.actual = req->req.length; + else + req->req.actual = dd->iso_status[0] & 0xFFFF; + } else + req->req.actual += DD_STATUS_CURDMACNT(status); + + /* Send a ZLP if necessary. This will be done for non-int + * packets which have a size that is a divisor of MAXP */ + if (req->send_zlp) { + /* + * If at least 1 buffer is available, send the ZLP now. + * Otherwise, the ZLP send needs to be deferred until a + * buffer is available. + */ + if (udc_clearep_getsts(udc, ep->hwep_num) & EP_SEL_F) { + udc_clearep_getsts(udc, ep->hwep_num); + uda_enable_hwepint(udc, ep->hwep_num); + epstatus = udc_clearep_getsts(udc, ep->hwep_num); + + /* Let the EP interrupt handle the ZLP */ + return; + } else + udc_send_in_zlp(udc, ep); + } + + /* Transfer request is complete */ + done(ep, req, 0); + + /* Start another request if ready */ + udc_clearep_getsts(udc, ep->hwep_num); + if (!list_empty((&ep->queue))) { + if (ep->is_in) + udc_ep_in_req_dma(udc, ep); + else + udc_ep_out_req_dma(udc, ep); + } else + ep->req_pending = 0; + +} + +/* + * + * Endpoint 0 functions + * + */ +static void udc_handle_dev(struct lpc32xx_udc *udc) +{ + u32 tmp; + + udc_protocol_cmd_w(udc, CMD_GET_DEV_STAT); + tmp = udc_protocol_cmd_r(udc, DAT_GET_DEV_STAT); + + if (tmp & DEV_RST) + uda_usb_reset(udc); + else if (tmp & DEV_CON_CH) + uda_power_event(udc, (tmp & DEV_CON)); + else if (tmp & DEV_SUS_CH) { + if (tmp & DEV_SUS) { + if (udc->vbus == 0) + stop_activity(udc); + else if ((udc->gadget.speed != USB_SPEED_UNKNOWN) && + udc->driver) { + /* Power down transceiver */ + udc->poweron = 0; + schedule_work(&udc->pullup_job); + uda_resm_susp_event(udc, 1); + } + } else if ((udc->gadget.speed != USB_SPEED_UNKNOWN) && + udc->driver && udc->vbus) { + uda_resm_susp_event(udc, 0); + /* Power up transceiver */ + udc->poweron = 1; + schedule_work(&udc->pullup_job); + } + } +} + +static int udc_get_status(struct lpc32xx_udc *udc, u16 reqtype, u16 wIndex) +{ + struct lpc32xx_ep *ep; + u32 ep0buff = 0, tmp; + + switch (reqtype & USB_RECIP_MASK) { + case USB_RECIP_INTERFACE: + break; /* Not supported */ + + case USB_RECIP_DEVICE: + ep0buff = (udc->selfpowered << USB_DEVICE_SELF_POWERED); + if (udc->dev_status & (1 << USB_DEVICE_REMOTE_WAKEUP)) + ep0buff |= (1 << USB_DEVICE_REMOTE_WAKEUP); + break; + + case USB_RECIP_ENDPOINT: + tmp = wIndex & USB_ENDPOINT_NUMBER_MASK; + ep = &udc->ep[tmp]; + if ((tmp == 0) || (tmp >= NUM_ENDPOINTS) || (tmp && !ep->desc)) + return -EOPNOTSUPP; + + if (wIndex & USB_DIR_IN) { + if (!ep->is_in) + return -EOPNOTSUPP; /* Something's wrong */ + } else if (ep->is_in) + return -EOPNOTSUPP; /* Not an IN endpoint */ + + /* Get status of the endpoint */ + udc_protocol_cmd_w(udc, CMD_SEL_EP(ep->hwep_num)); + tmp = udc_protocol_cmd_r(udc, DAT_SEL_EP(ep->hwep_num)); + + if (tmp & EP_SEL_ST) + ep0buff = (1 << USB_ENDPOINT_HALT); + else + ep0buff = 0; + break; + + default: + break; + } + + /* Return data */ + udc_write_hwep(udc, EP_IN, &ep0buff, 2); + + return 0; +} + +static void udc_handle_ep0_setup(struct lpc32xx_udc *udc) +{ + struct lpc32xx_ep *ep, *ep0 = &udc->ep[0]; + struct usb_ctrlrequest ctrlpkt; + int i, bytes; + u16 wIndex, wValue, wLength, reqtype, req, tmp; + + /* Nuke previous transfers */ + nuke(ep0, -EPROTO); + + /* Get setup packet */ + bytes = udc_read_hwep(udc, EP_OUT, (u32 *) &ctrlpkt, 8); + if (bytes != 8) { + ep_warn(ep0, "Incorrectly sized setup packet (s/b 8, is %d)!\n", + bytes); + return; + } + + /* Native endianness */ + wIndex = le16_to_cpu(ctrlpkt.wIndex); + wValue = le16_to_cpu(ctrlpkt.wValue); + wLength = le16_to_cpu(ctrlpkt.wLength); + reqtype = le16_to_cpu(ctrlpkt.bRequestType); + + /* Set direction of EP0 */ + if (likely(reqtype & USB_DIR_IN)) + ep0->is_in = 1; + else + ep0->is_in = 0; + + /* Handle SETUP packet */ + req = le16_to_cpu(ctrlpkt.bRequest); + switch (req) { + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + switch (reqtype) { + case (USB_TYPE_STANDARD | USB_RECIP_DEVICE): + if (wValue != USB_DEVICE_REMOTE_WAKEUP) + goto stall; /* Nothing else handled */ + + /* Tell board about event */ + if (req == USB_REQ_CLEAR_FEATURE) + udc->dev_status &= + ~(1 << USB_DEVICE_REMOTE_WAKEUP); + else + udc->dev_status |= + (1 << USB_DEVICE_REMOTE_WAKEUP); + uda_remwkp_cgh(udc); + goto zlp_send; + + case (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT): + tmp = wIndex & USB_ENDPOINT_NUMBER_MASK; + if ((wValue != USB_ENDPOINT_HALT) || + (tmp >= NUM_ENDPOINTS)) + break; + + /* Find hardware endpoint from logical endpoint */ + ep = &udc->ep[tmp]; + tmp = ep->hwep_num; + if (tmp == 0) + break; + + if (req == USB_REQ_SET_FEATURE) + udc_stall_hwep(udc, tmp); + else if (!ep->wedge) + udc_clrstall_hwep(udc, tmp); + + goto zlp_send; + + default: + break; + } + + + case USB_REQ_SET_ADDRESS: + if (reqtype == (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) { + udc_set_address(udc, wValue); + goto zlp_send; + } + break; + + case USB_REQ_GET_STATUS: + udc_get_status(udc, reqtype, wIndex); + return; + + default: + break; /* Let GadgetFS handle the descriptor instead */ + } + + if (likely(udc->driver)) { + /* device-2-host (IN) or no data setup command, process + * immediately */ + spin_unlock(&udc->lock); + i = udc->driver->setup(&udc->gadget, &ctrlpkt); + + spin_lock(&udc->lock); + if (req == USB_REQ_SET_CONFIGURATION) { + /* Configuration is set after endpoints are realized */ + if (wValue) { + /* Set configuration */ + udc_set_device_configured(udc); + + udc_protocol_cmd_data_w(udc, CMD_SET_MODE, + DAT_WR_BYTE(AP_CLK | + INAK_BI | INAK_II)); + } else { + /* Clear configuration */ + udc_set_device_unconfigured(udc); + + /* Disable NAK interrupts */ + udc_protocol_cmd_data_w(udc, CMD_SET_MODE, + DAT_WR_BYTE(AP_CLK)); + } + } + + if (i < 0) { + /* setup processing failed, force stall */ + dev_err(udc->dev, + "req %02x.%02x protocol STALL; stat %d\n", + reqtype, req, i); + udc->ep0state = WAIT_FOR_SETUP; + goto stall; + } + } + + if (!ep0->is_in) + udc_ep0_send_zlp(udc); /* ZLP IN packet on data phase */ + + return; + +stall: + udc_stall_hwep(udc, EP_IN); + return; + +zlp_send: + udc_ep0_send_zlp(udc); + return; +} + +/* IN endpoint 0 transfer */ +static void udc_handle_ep0_in(struct lpc32xx_udc *udc) +{ + struct lpc32xx_ep *ep0 = &udc->ep[0]; + u32 epstatus; + + /* Clear EP interrupt */ + epstatus = udc_clearep_getsts(udc, EP_IN); + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + ep0->totalints++; +#endif + + /* Stalled? Clear stall and reset buffers */ + if (epstatus & EP_SEL_ST) { + udc_clrstall_hwep(udc, EP_IN); + nuke(ep0, -ECONNABORTED); + udc->ep0state = WAIT_FOR_SETUP; + return; + } + + /* Is a buffer available? */ + if (!(epstatus & EP_SEL_F)) { + /* Handle based on current state */ + if (udc->ep0state == DATA_IN) + udc_ep0_in_req(udc); + else { + /* Unknown state for EP0 oe end of DATA IN phase */ + nuke(ep0, -ECONNABORTED); + udc->ep0state = WAIT_FOR_SETUP; + } + } +} + +/* OUT endpoint 0 transfer */ +static void udc_handle_ep0_out(struct lpc32xx_udc *udc) +{ + struct lpc32xx_ep *ep0 = &udc->ep[0]; + u32 epstatus; + + /* Clear EP interrupt */ + epstatus = udc_clearep_getsts(udc, EP_OUT); + + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + ep0->totalints++; +#endif + + /* Stalled? */ + if (epstatus & EP_SEL_ST) { + udc_clrstall_hwep(udc, EP_OUT); + nuke(ep0, -ECONNABORTED); + udc->ep0state = WAIT_FOR_SETUP; + return; + } + + /* A NAK may occur if a packet couldn't be received yet */ + if (epstatus & EP_SEL_EPN) + return; + /* Setup packet incoming? */ + if (epstatus & EP_SEL_STP) { + nuke(ep0, 0); + udc->ep0state = WAIT_FOR_SETUP; + } + + /* Data available? */ + if (epstatus & EP_SEL_F) + /* Handle based on current state */ + switch (udc->ep0state) { + case WAIT_FOR_SETUP: + udc_handle_ep0_setup(udc); + break; + + case DATA_OUT: + udc_ep0_out_req(udc); + break; + + default: + /* Unknown state for EP0 */ + nuke(ep0, -ECONNABORTED); + udc->ep0state = WAIT_FOR_SETUP; + } +} + +/* Must be called without lock */ +static int lpc32xx_get_frame(struct usb_gadget *gadget) +{ + int frame; + unsigned long flags; + struct lpc32xx_udc *udc = to_udc(gadget); + + if (!udc->clocked) + return -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + + frame = (int) udc_get_current_frame(udc); + + spin_unlock_irqrestore(&udc->lock, flags); + + return frame; +} + +static int lpc32xx_wakeup(struct usb_gadget *gadget) +{ + return -ENOTSUPP; +} + +static int lpc32xx_set_selfpowered(struct usb_gadget *gadget, int is_on) +{ + struct lpc32xx_udc *udc = to_udc(gadget); + + /* Always self-powered */ + udc->selfpowered = (is_on != 0); + + return 0; +} + +/* + * vbus is here! turn everything on that's ready + * Must be called without lock + */ +static int lpc32xx_vbus_session(struct usb_gadget *gadget, int is_active) +{ + unsigned long flags; + struct lpc32xx_udc *udc = to_udc(gadget); + + spin_lock_irqsave(&udc->lock, flags); + + /* Doesn't need lock */ + if (udc->driver) { + udc_clk_set(udc, 1); + udc_enable(udc); + pullup(udc, is_active); + } else { + stop_activity(udc); + pullup(udc, 0); + + spin_unlock_irqrestore(&udc->lock, flags); + /* + * Wait for all the endpoints to disable, + * before disabling clocks. Don't wait if + * endpoints are not enabled. + */ + if (atomic_read(&udc->enabled_ep_cnt)) + wait_event_interruptible(udc->ep_disable_wait_queue, + (atomic_read(&udc->enabled_ep_cnt) == 0)); + + spin_lock_irqsave(&udc->lock, flags); + + udc_clk_set(udc, 0); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/* Can be called with or without lock */ +static int lpc32xx_pullup(struct usb_gadget *gadget, int is_on) +{ + struct lpc32xx_udc *udc = to_udc(gadget); + + /* Doesn't need lock */ + pullup(udc, is_on); + + return 0; +} + +static int lpc32xx_start(struct usb_gadget_driver *driver, + int (*bind)(struct usb_gadget *)); +static int lpc32xx_stop(struct usb_gadget_driver *driver); + +static const struct usb_gadget_ops lpc32xx_udc_ops = { + .get_frame = lpc32xx_get_frame, + .wakeup = lpc32xx_wakeup, + .set_selfpowered = lpc32xx_set_selfpowered, + .vbus_session = lpc32xx_vbus_session, + .pullup = lpc32xx_pullup, + .start = lpc32xx_start, + .stop = lpc32xx_stop, +}; + +static void nop_release(struct device *dev) +{ + /* nothing to free */ +} + +static struct lpc32xx_udc controller = { + .gadget = { + .ops = &lpc32xx_udc_ops, + .ep0 = &controller.ep[0].ep, + .name = driver_name, + .dev = { + .init_name = "gadget", + .release = nop_release, + } + }, + .ep[0] = { + .ep = { + .name = "ep0", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 0, + .hwep_num = 0, /* Can be 0 or 1, has special handling */ + .lep = 0, + .eptype = EP_CTL_TYPE, + }, + .ep[1] = { + .ep = { + .name = "ep1-int", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 2, + .hwep_num = 0, /* 2 or 3, will be set later */ + .lep = 1, + .eptype = EP_INT_TYPE, + }, + .ep[2] = { + .ep = { + .name = "ep2-bulk", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 4, + .hwep_num = 0, /* 4 or 5, will be set later */ + .lep = 2, + .eptype = EP_BLK_TYPE, + }, + .ep[3] = { + .ep = { + .name = "ep3-iso", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 1023, + .hwep_num_base = 6, + .hwep_num = 0, /* 6 or 7, will be set later */ + .lep = 3, + .eptype = EP_ISO_TYPE, + }, + .ep[4] = { + .ep = { + .name = "ep4-int", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 8, + .hwep_num = 0, /* 8 or 9, will be set later */ + .lep = 4, + .eptype = EP_INT_TYPE, + }, + .ep[5] = { + .ep = { + .name = "ep5-bulk", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 10, + .hwep_num = 0, /* 10 or 11, will be set later */ + .lep = 5, + .eptype = EP_BLK_TYPE, + }, + .ep[6] = { + .ep = { + .name = "ep6-iso", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 1023, + .hwep_num_base = 12, + .hwep_num = 0, /* 12 or 13, will be set later */ + .lep = 6, + .eptype = EP_ISO_TYPE, + }, + .ep[7] = { + .ep = { + .name = "ep7-int", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 14, + .hwep_num = 0, + .lep = 7, + .eptype = EP_INT_TYPE, + }, + .ep[8] = { + .ep = { + .name = "ep8-bulk", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 16, + .hwep_num = 0, + .lep = 8, + .eptype = EP_BLK_TYPE, + }, + .ep[9] = { + .ep = { + .name = "ep9-iso", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 1023, + .hwep_num_base = 18, + .hwep_num = 0, + .lep = 9, + .eptype = EP_ISO_TYPE, + }, + .ep[10] = { + .ep = { + .name = "ep10-int", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 20, + .hwep_num = 0, + .lep = 10, + .eptype = EP_INT_TYPE, + }, + .ep[11] = { + .ep = { + .name = "ep11-bulk", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 22, + .hwep_num = 0, + .lep = 11, + .eptype = EP_BLK_TYPE, + }, + .ep[12] = { + .ep = { + .name = "ep12-iso", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 1023, + .hwep_num_base = 24, + .hwep_num = 0, + .lep = 12, + .eptype = EP_ISO_TYPE, + }, + .ep[13] = { + .ep = { + .name = "ep13-int", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 26, + .hwep_num = 0, + .lep = 13, + .eptype = EP_INT_TYPE, + }, + .ep[14] = { + .ep = { + .name = "ep14-bulk", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 64, + .hwep_num_base = 28, + .hwep_num = 0, + .lep = 14, + .eptype = EP_BLK_TYPE, + }, + .ep[15] = { + .ep = { + .name = "ep15-bulk", + .ops = &lpc32xx_ep_ops, + }, + .udc = &controller, + .maxpacket = 1023, + .hwep_num_base = 30, + .hwep_num = 0, + .lep = 15, + .eptype = EP_BLK_TYPE, + }, +}; + +/* ISO and status interrupts */ +static irqreturn_t lpc32xx_usb_lp_irq(int irq, void *_udc) +{ + u32 tmp, devstat; + struct lpc32xx_udc *udc = _udc; + + spin_lock(&udc->lock); + + /* Read the device status register */ + devstat = readl(USBD_DEVINTST(udc->udp_baseaddr)); + + devstat &= ~USBD_EP_FAST; + writel(devstat, USBD_DEVINTCLR(udc->udp_baseaddr)); + devstat = devstat & udc->enabled_devints; + + /* Device specific handling needed? */ + if (devstat & USBD_DEV_STAT) + udc_handle_dev(udc); + + /* Start of frame? (devstat & FRAME_INT): + * The frame interrupt isn't really needed for ISO support, + * as the driver will queue the necessary packets */ + + /* Error? */ + if (devstat & ERR_INT) { + /* All types of errors, from cable removal during transfer to + * misc protocol and bit errors. These are mostly for just info, + * as the USB hardware will work around these. If these errors + * happen alot, something is wrong. */ + udc_protocol_cmd_w(udc, CMD_RD_ERR_STAT); + tmp = udc_protocol_cmd_r(udc, DAT_RD_ERR_STAT); + dev_dbg(udc->dev, "Device error (0x%x)!\n", tmp); + } + + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +/* EP interrupts */ +static irqreturn_t lpc32xx_usb_hp_irq(int irq, void *_udc) +{ + u32 tmp; + struct lpc32xx_udc *udc = _udc; + + spin_lock(&udc->lock); + + /* Read the device status register */ + writel(USBD_EP_FAST, USBD_DEVINTCLR(udc->udp_baseaddr)); + + /* Endpoints */ + tmp = readl(USBD_EPINTST(udc->udp_baseaddr)); + + /* Special handling for EP0 */ + if (tmp & (EP_MASK_SEL(0, EP_OUT) | EP_MASK_SEL(0, EP_IN))) { + /* Handle EP0 IN */ + if (tmp & (EP_MASK_SEL(0, EP_IN))) + udc_handle_ep0_in(udc); + + /* Handle EP0 OUT */ + if (tmp & (EP_MASK_SEL(0, EP_OUT))) + udc_handle_ep0_out(udc); + } + + /* All other EPs */ + if (tmp & ~(EP_MASK_SEL(0, EP_OUT) | EP_MASK_SEL(0, EP_IN))) { + int i; + + /* Handle other EP interrupts */ + for (i = 1; i < NUM_ENDPOINTS; i++) { + if (tmp & (1 << udc->ep[i].hwep_num)) + udc_handle_eps(udc, &udc->ep[i]); + } + } + + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +static irqreturn_t lpc32xx_usb_devdma_irq(int irq, void *_udc) +{ + struct lpc32xx_udc *udc = _udc; + + int i; + u32 tmp; + + spin_lock(&udc->lock); + + /* Handle EP DMA EOT interrupts */ + tmp = readl(USBD_EOTINTST(udc->udp_baseaddr)) | + (readl(USBD_EPDMAST(udc->udp_baseaddr)) & + readl(USBD_NDDRTINTST(udc->udp_baseaddr))) | + readl(USBD_SYSERRTINTST(udc->udp_baseaddr)); + for (i = 1; i < NUM_ENDPOINTS; i++) { + if (tmp & (1 << udc->ep[i].hwep_num)) + udc_handle_dma_ep(udc, &udc->ep[i]); + } + + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +/* + * + * VBUS detection, pullup handler, and Gadget cable state notification + * + */ +static void vbus_work(struct work_struct *work) +{ + u8 value; + struct lpc32xx_udc *udc = container_of(work, struct lpc32xx_udc, + vbus_job); + + if (udc->enabled != 0) { + /* Discharge VBUS real quick */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DISCHRG); + + /* Give VBUS some time (100mS) to discharge */ + msleep(100); + + /* Disable VBUS discharge resistor */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + OTG1_VBUS_DISCHRG); + + /* Clear interrupt */ + i2c_smbus_write_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_LATCH | + ISP1301_I2C_REG_CLEAR_ADDR, ~0); + + /* Get the VBUS status from the transceiver */ + value = i2c_smbus_read_byte_data(udc->isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_2); + + /* VBUS on or off? */ + if (value & OTG_B_SESS_VLD) + udc->vbus = 1; + else + udc->vbus = 0; + + /* VBUS changed? */ + if (udc->last_vbus != udc->vbus) { + udc->last_vbus = udc->vbus; + lpc32xx_vbus_session(&udc->gadget, udc->vbus); + } + } + + /* Re-enable after completion */ + enable_irq(udc->udp_irq[IRQ_USB_ATX]); +} + +static irqreturn_t lpc32xx_usb_vbus_irq(int irq, void *_udc) +{ + struct lpc32xx_udc *udc = _udc; + + /* Defer handling of VBUS IRQ to work queue */ + disable_irq_nosync(udc->udp_irq[IRQ_USB_ATX]); + schedule_work(&udc->vbus_job); + + return IRQ_HANDLED; +} + +static int lpc32xx_start(struct usb_gadget_driver *driver, + int (*bind)(struct usb_gadget *)) +{ + struct lpc32xx_udc *udc = &controller; + int retval, i; + + if (!driver || driver->max_speed < USB_SPEED_FULL || + !bind || !driver->setup) { + dev_err(udc->dev, "bad parameter.\n"); + return -EINVAL; + } + + if (udc->driver) { + dev_err(udc->dev, "UDC already has a gadget driver\n"); + return -EBUSY; + } + + udc->driver = driver; + udc->gadget.dev.driver = &driver->driver; + udc->enabled = 1; + udc->selfpowered = 1; + udc->vbus = 0; + + retval = bind(&udc->gadget); + if (retval) { + dev_err(udc->dev, "bind() returned %d\n", retval); + udc->enabled = 0; + udc->selfpowered = 0; + udc->driver = NULL; + udc->gadget.dev.driver = NULL; + return retval; + } + + dev_dbg(udc->dev, "bound to %s\n", driver->driver.name); + + /* Force VBUS process once to check for cable insertion */ + udc->last_vbus = udc->vbus = 0; + schedule_work(&udc->vbus_job); + + /* Do not re-enable ATX IRQ (3) */ + for (i = IRQ_USB_LP; i < IRQ_USB_ATX; i++) + enable_irq(udc->udp_irq[i]); + + return 0; +} + +static int lpc32xx_stop(struct usb_gadget_driver *driver) +{ + int i; + struct lpc32xx_udc *udc = &controller; + + if (!driver || driver != udc->driver || !driver->unbind) + return -EINVAL; + + /* Disable USB pullup */ + isp1301_pullup_enable(udc, 0, 1); + + for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++) + disable_irq(udc->udp_irq[i]); + + if (udc->clocked) { + + spin_lock(&udc->lock); + stop_activity(udc); + spin_unlock(&udc->lock); + + /* + * Wait for all the endpoints to disable, + * before disabling clocks. Don't wait if + * endpoints are not enabled. + */ + if (atomic_read(&udc->enabled_ep_cnt)) + wait_event_interruptible(udc->ep_disable_wait_queue, + (atomic_read(&udc->enabled_ep_cnt) == 0)); + + spin_lock(&udc->lock); + udc_clk_set(udc, 0); + spin_unlock(&udc->lock); + } + + udc->enabled = 0; + pullup(udc, 0); + + driver->unbind(&udc->gadget); + udc->gadget.dev.driver = NULL; + udc->driver = NULL; + + dev_dbg(udc->dev, "unbound from %s\n", driver->driver.name); + return 0; +} + +static void lpc32xx_udc_shutdown(struct platform_device *dev) +{ + /* Force disconnect on reboot */ + struct lpc32xx_udc *udc = &controller; + + pullup(udc, 0); +} + +/* + * Callbacks to be overridden by options passed via OF (TODO) + */ + +static void lpc32xx_usbd_conn_chg(int conn) +{ + /* Do nothing, it might be nice to enable an LED + * based on conn state being !0 */ +} + +static void lpc32xx_usbd_susp_chg(int susp) +{ + /* Device suspend if susp != 0 */ +} + +static void lpc32xx_rmwkup_chg(int remote_wakup_enable) +{ + /* Enable or disable USB remote wakeup */ +} + +struct lpc32xx_usbd_cfg lpc32xx_usbddata = { + .vbus_drv_pol = 0, + .conn_chgb = &lpc32xx_usbd_conn_chg, + .susp_chgb = &lpc32xx_usbd_susp_chg, + .rmwk_chgb = &lpc32xx_rmwkup_chg, +}; + + +static u64 lpc32xx_usbd_dmamask = ~(u32) 0x7F; + +static int __init lpc32xx_udc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct lpc32xx_udc *udc = &controller; + int retval, i; + struct resource *res; + dma_addr_t dma_handle; + struct device_node *isp1301_node; + + /* init software state */ + udc->gadget.dev.parent = dev; + udc->pdev = pdev; + udc->dev = &pdev->dev; + udc->enabled = 0; + + if (pdev->dev.of_node) { + isp1301_node = of_parse_phandle(pdev->dev.of_node, + "transceiver", 0); + } else { + isp1301_node = NULL; + } + + udc->isp1301_i2c_client = isp1301_get_client(isp1301_node); + if (!udc->isp1301_i2c_client) + return -EPROBE_DEFER; + + dev_info(udc->dev, "ISP1301 I2C device at address 0x%x\n", + udc->isp1301_i2c_client->addr); + + pdev->dev.dma_mask = &lpc32xx_usbd_dmamask; + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + + udc->board = &lpc32xx_usbddata; + + /* + * Resources are mapped as follows: + * IORESOURCE_MEM, base address and size of USB space + * IORESOURCE_IRQ, USB device low priority interrupt number + * IORESOURCE_IRQ, USB device high priority interrupt number + * IORESOURCE_IRQ, USB device interrupt number + * IORESOURCE_IRQ, USB transceiver interrupt number + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + spin_lock_init(&udc->lock); + + /* Get IRQs */ + for (i = 0; i < 4; i++) { + udc->udp_irq[i] = platform_get_irq(pdev, i); + if (udc->udp_irq[i] < 0) { + dev_err(udc->dev, + "irq resource %d not available!\n", i); + return udc->udp_irq[i]; + } + } + + udc->io_p_start = res->start; + udc->io_p_size = resource_size(res); + if (!request_mem_region(udc->io_p_start, udc->io_p_size, driver_name)) { + dev_err(udc->dev, "someone's using UDC memory\n"); + return -EBUSY; + } + + udc->udp_baseaddr = ioremap(udc->io_p_start, udc->io_p_size); + if (!udc->udp_baseaddr) { + retval = -ENOMEM; + dev_err(udc->dev, "IO map failure\n"); + goto io_map_fail; + } + + /* Enable AHB slave USB clock, needed for further USB clock control */ + writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL); + + /* Get required clocks */ + udc->usb_pll_clk = clk_get(&pdev->dev, "ck_pll5"); + if (IS_ERR(udc->usb_pll_clk)) { + dev_err(udc->dev, "failed to acquire USB PLL\n"); + retval = PTR_ERR(udc->usb_pll_clk); + goto pll_get_fail; + } + udc->usb_slv_clk = clk_get(&pdev->dev, "ck_usbd"); + if (IS_ERR(udc->usb_slv_clk)) { + dev_err(udc->dev, "failed to acquire USB device clock\n"); + retval = PTR_ERR(udc->usb_slv_clk); + goto usb_clk_get_fail; + } + + /* Setup PLL clock to 48MHz */ + retval = clk_enable(udc->usb_pll_clk); + if (retval < 0) { + dev_err(udc->dev, "failed to start USB PLL\n"); + goto pll_enable_fail; + } + + retval = clk_set_rate(udc->usb_pll_clk, 48000); + if (retval < 0) { + dev_err(udc->dev, "failed to set USB clock rate\n"); + goto pll_set_fail; + } + + writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN, USB_CTRL); + + /* Enable USB device clock */ + retval = clk_enable(udc->usb_slv_clk); + if (retval < 0) { + dev_err(udc->dev, "failed to start USB device clock\n"); + goto usb_clk_enable_fail; + } + + /* Set to enable all needed USB OTG clocks */ + writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc)); + + i = 1000; + while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) != + USB_CLOCK_MASK) && (i > 0)) + i--; + if (!i) + dev_dbg(udc->dev, "USB OTG clocks not correctly enabled\n"); + + /* Setup deferred workqueue data */ + udc->poweron = udc->pullup = 0; + INIT_WORK(&udc->pullup_job, pullup_work); + INIT_WORK(&udc->vbus_job, vbus_work); +#ifdef CONFIG_PM + INIT_WORK(&udc->power_job, power_work); +#endif + + /* All clocks are now on */ + udc->clocked = 1; + + isp1301_udc_configure(udc); + /* Allocate memory for the UDCA */ + udc->udca_v_base = dma_alloc_coherent(&pdev->dev, UDCA_BUFF_SIZE, + &dma_handle, + (GFP_KERNEL | GFP_DMA)); + if (!udc->udca_v_base) { + dev_err(udc->dev, "error getting UDCA region\n"); + retval = -ENOMEM; + goto i2c_fail; + } + udc->udca_p_base = dma_handle; + dev_dbg(udc->dev, "DMA buffer(0x%x bytes), P:0x%08x, V:0x%p\n", + UDCA_BUFF_SIZE, udc->udca_p_base, udc->udca_v_base); + + /* Setup the DD DMA memory pool */ + udc->dd_cache = dma_pool_create("udc_dd", udc->dev, + sizeof(struct lpc32xx_usbd_dd_gad), + sizeof(u32), 0); + if (!udc->dd_cache) { + dev_err(udc->dev, "error getting DD DMA region\n"); + retval = -ENOMEM; + goto dma_alloc_fail; + } + + /* Clear USB peripheral and initialize gadget endpoints */ + udc_disable(udc); + udc_reinit(udc); + + retval = device_register(&udc->gadget.dev); + if (retval < 0) { + dev_err(udc->dev, "Device registration failure\n"); + goto dev_register_fail; + } + + /* Request IRQs - low and high priority USB device IRQs are routed to + * the same handler, while the DMA interrupt is routed elsewhere */ + retval = request_irq(udc->udp_irq[IRQ_USB_LP], lpc32xx_usb_lp_irq, + 0, "udc_lp", udc); + if (retval < 0) { + dev_err(udc->dev, "LP request irq %d failed\n", + udc->udp_irq[IRQ_USB_LP]); + goto irq_lp_fail; + } + retval = request_irq(udc->udp_irq[IRQ_USB_HP], lpc32xx_usb_hp_irq, + 0, "udc_hp", udc); + if (retval < 0) { + dev_err(udc->dev, "HP request irq %d failed\n", + udc->udp_irq[IRQ_USB_HP]); + goto irq_hp_fail; + } + + retval = request_irq(udc->udp_irq[IRQ_USB_DEVDMA], + lpc32xx_usb_devdma_irq, 0, "udc_dma", udc); + if (retval < 0) { + dev_err(udc->dev, "DEV request irq %d failed\n", + udc->udp_irq[IRQ_USB_DEVDMA]); + goto irq_dev_fail; + } + + /* The transceiver interrupt is used for VBUS detection and will + kick off the VBUS handler function */ + retval = request_irq(udc->udp_irq[IRQ_USB_ATX], lpc32xx_usb_vbus_irq, + 0, "udc_otg", udc); + if (retval < 0) { + dev_err(udc->dev, "VBUS request irq %d failed\n", + udc->udp_irq[IRQ_USB_ATX]); + goto irq_xcvr_fail; + } + + /* Initialize wait queue */ + init_waitqueue_head(&udc->ep_disable_wait_queue); + atomic_set(&udc->enabled_ep_cnt, 0); + + /* Keep all IRQs disabled until GadgetFS starts up */ + for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++) + disable_irq(udc->udp_irq[i]); + + retval = usb_add_gadget_udc(dev, &udc->gadget); + if (retval < 0) + goto add_gadget_fail; + + dev_set_drvdata(dev, udc); + device_init_wakeup(dev, 1); + create_debug_file(udc); + + /* Disable clocks for now */ + udc_clk_set(udc, 0); + + dev_info(udc->dev, "%s version %s\n", driver_name, DRIVER_VERSION); + return 0; + +add_gadget_fail: + free_irq(udc->udp_irq[IRQ_USB_ATX], udc); +irq_xcvr_fail: + free_irq(udc->udp_irq[IRQ_USB_DEVDMA], udc); +irq_dev_fail: + free_irq(udc->udp_irq[IRQ_USB_HP], udc); +irq_hp_fail: + free_irq(udc->udp_irq[IRQ_USB_LP], udc); +irq_lp_fail: + device_unregister(&udc->gadget.dev); +dev_register_fail: + dma_pool_destroy(udc->dd_cache); +dma_alloc_fail: + dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE, + udc->udca_v_base, udc->udca_p_base); +i2c_fail: + clk_disable(udc->usb_slv_clk); +usb_clk_enable_fail: +pll_set_fail: + clk_disable(udc->usb_pll_clk); +pll_enable_fail: + clk_put(udc->usb_slv_clk); +usb_clk_get_fail: + clk_put(udc->usb_pll_clk); +pll_get_fail: + iounmap(udc->udp_baseaddr); +io_map_fail: + release_mem_region(udc->io_p_start, udc->io_p_size); + dev_err(udc->dev, "%s probe failed, %d\n", driver_name, retval); + + return retval; +} + +static int __devexit lpc32xx_udc_remove(struct platform_device *pdev) +{ + struct lpc32xx_udc *udc = platform_get_drvdata(pdev); + + usb_del_gadget_udc(&udc->gadget); + if (udc->driver) + return -EBUSY; + + udc_clk_set(udc, 1); + udc_disable(udc); + pullup(udc, 0); + + free_irq(udc->udp_irq[IRQ_USB_ATX], udc); + + device_init_wakeup(&pdev->dev, 0); + remove_debug_file(udc); + + dma_pool_destroy(udc->dd_cache); + dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE, + udc->udca_v_base, udc->udca_p_base); + free_irq(udc->udp_irq[IRQ_USB_DEVDMA], udc); + free_irq(udc->udp_irq[IRQ_USB_HP], udc); + free_irq(udc->udp_irq[IRQ_USB_LP], udc); + + device_unregister(&udc->gadget.dev); + + clk_disable(udc->usb_slv_clk); + clk_put(udc->usb_slv_clk); + clk_disable(udc->usb_pll_clk); + clk_put(udc->usb_pll_clk); + iounmap(udc->udp_baseaddr); + release_mem_region(udc->io_p_start, udc->io_p_size); + + return 0; +} + +#ifdef CONFIG_PM +static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg) +{ + int to = 1000; + struct lpc32xx_udc *udc = platform_get_drvdata(pdev); + + if (udc->clocked) { + /* Power down ISP */ + udc->poweron = 0; + isp1301_set_powerstate(udc, 0); + + /* Disable clocking */ + udc_clk_set(udc, 0); + + /* Keep clock flag on, so we know to re-enable clocks + on resume */ + udc->clocked = 1; + + /* Kill OTG and I2C clocks */ + writel(0, USB_OTG_CLK_CTRL(udc)); + while (((readl(USB_OTG_CLK_STAT(udc)) & OTGOFF_CLK_MASK) != + OTGOFF_CLK_MASK) && (to > 0)) + to--; + if (!to) + dev_dbg(udc->dev, + "USB OTG clocks not correctly enabled\n"); + + /* Kill global USB clock */ + clk_disable(udc->usb_slv_clk); + } + + return 0; +} + +static int lpc32xx_udc_resume(struct platform_device *pdev) +{ + struct lpc32xx_udc *udc = platform_get_drvdata(pdev); + + if (udc->clocked) { + /* Enable global USB clock */ + clk_enable(udc->usb_slv_clk); + + /* Enable clocking */ + udc_clk_set(udc, 1); + + /* ISP back to normal power mode */ + udc->poweron = 1; + isp1301_set_powerstate(udc, 1); + } + + return 0; +} +#else +#define lpc32xx_udc_suspend NULL +#define lpc32xx_udc_resume NULL +#endif + +#ifdef CONFIG_OF +static struct of_device_id lpc32xx_udc_of_match[] = { + { .compatible = "nxp,lpc3220-udc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, lpc32xx_udc_of_match); +#endif + +static struct platform_driver lpc32xx_udc_driver = { + .remove = __devexit_p(lpc32xx_udc_remove), + .shutdown = lpc32xx_udc_shutdown, + .suspend = lpc32xx_udc_suspend, + .resume = lpc32xx_udc_resume, + .driver = { + .name = (char *) driver_name, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(lpc32xx_udc_of_match), + }, +}; + +static int __init udc_init_module(void) +{ + return platform_driver_probe(&lpc32xx_udc_driver, lpc32xx_udc_probe); +} +module_init(udc_init_module); + +static void __exit udc_exit_module(void) +{ + platform_driver_unregister(&lpc32xx_udc_driver); +} +module_exit(udc_exit_module); + +MODULE_DESCRIPTION("LPC32XX udc driver"); +MODULE_AUTHOR("Kevin Wells "); +MODULE_AUTHOR("Roland Stigge "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:lpc32xx_udc"); -- cgit v0.10.2 From 73108aa90cbfc663649885a06fe5c1235307de1c Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Sun, 29 Apr 2012 16:47:06 +0200 Subject: USB: ohci-nxp: Use isp1301 driver ohci-nxp duplicates the isp1301 driver. This patch removes this code and makes ohci-nxp use the new separate isp1301 driver instead. Signed-off-by: Roland Stigge Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/usb/ohci-nxp.txt b/Documentation/devicetree/bindings/usb/ohci-nxp.txt index b5c3631..71e28c1 100644 --- a/Documentation/devicetree/bindings/usb/ohci-nxp.txt +++ b/Documentation/devicetree/bindings/usb/ohci-nxp.txt @@ -5,12 +5,20 @@ Required properties: - reg: physical base address of the controller and length of memory mapped region. - interrupts: The OHCI interrupt +- transceiver: phandle of the associated ISP1301 device - this is necessary for + the UDC controller for connecting to the USB physical layer Example (LPC32xx): + isp1301: usb-transceiver@2c { + compatible = "nxp,isp1301"; + reg = <0x2c>; + }; + ohci@31020000 { compatible = "nxp,ohci-nxp"; reg = <0x31020000 0x300>; interrupt-parent = <&mic>; interrupts = <0x3b 0>; + transceiver = <&isp1301>; }; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 896fc91..684a7bb 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -292,6 +292,7 @@ config USB_OHCI_HCD depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 select USB_OTG_UTILS if ARCH_OMAP + select USB_ISP1301 if ARCH_LPC32XX || ARCH_PNX4008 ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index bf542e7..1e364ec 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -58,54 +59,6 @@ #define TRANSPARENT_I2C_EN (1 << 7) #define HOST_EN (1 << 0) -/* ISP1301 USB transceiver I2C registers */ -#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */ - -#define MC1_SPEED_REG (1 << 0) -#define MC1_SUSPEND_REG (1 << 1) -#define MC1_DAT_SE0 (1 << 2) -#define MC1_TRANSPARENT (1 << 3) -#define MC1_BDIS_ACON_EN (1 << 4) -#define MC1_OE_INT_EN (1 << 5) -#define MC1_UART_EN (1 << 6) -#define MC1_MASK 0x7f - -#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */ - -#define MC2_GLOBAL_PWR_DN (1 << 0) -#define MC2_SPD_SUSP_CTRL (1 << 1) -#define MC2_BI_DI (1 << 2) -#define MC2_TRANSP_BDIR0 (1 << 3) -#define MC2_TRANSP_BDIR1 (1 << 4) -#define MC2_AUDIO_EN (1 << 5) -#define MC2_PSW_EN (1 << 6) -#define MC2_EN2V7 (1 << 7) - -#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */ -# define OTG1_DP_PULLUP (1 << 0) -# define OTG1_DM_PULLUP (1 << 1) -# define OTG1_DP_PULLDOWN (1 << 2) -# define OTG1_DM_PULLDOWN (1 << 3) -# define OTG1_ID_PULLDOWN (1 << 4) -# define OTG1_VBUS_DRV (1 << 5) -# define OTG1_VBUS_DISCHRG (1 << 6) -# define OTG1_VBUS_CHRG (1 << 7) -#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */ -# define OTG_B_SESS_END (1 << 6) -# define OTG_B_SESS_VLD (1 << 7) - -#define ISP1301_I2C_ADDR 0x2C - -#define ISP1301_I2C_MODE_CONTROL_1 0x4 -#define ISP1301_I2C_MODE_CONTROL_2 0x12 -#define ISP1301_I2C_OTG_CONTROL_1 0x6 -#define ISP1301_I2C_OTG_CONTROL_2 0x10 -#define ISP1301_I2C_INTERRUPT_SOURCE 0x8 -#define ISP1301_I2C_INTERRUPT_LATCH 0xA -#define ISP1301_I2C_INTERRUPT_FALLING 0xC -#define ISP1301_I2C_INTERRUPT_RISING 0xE -#define ISP1301_I2C_REG_CLEAR_ADDR 1 - /* On LPC32xx, those are undefined */ #ifndef start_int_set_falling_edge #define start_int_set_falling_edge(irq) @@ -115,41 +68,12 @@ #define start_int_umask(irq) #endif -static struct i2c_driver isp1301_driver; static struct i2c_client *isp1301_i2c_client; extern int usb_disabled(void); static struct clk *usb_clk; -static const unsigned short normal_i2c[] = - { ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END }; - -static int isp1301_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - return 0; -} - -static int isp1301_remove(struct i2c_client *client) -{ - return 0; -} - -static const struct i2c_device_id isp1301_id[] = { - { "isp1301_nxp", 0 }, - { } -}; - -static struct i2c_driver isp1301_driver = { - .driver = { - .name = "isp1301_nxp", - }, - .probe = isp1301_probe, - .remove = isp1301_remove, - .id_table = isp1301_id, -}; - static void isp1301_configure_pnx4008(void) { /* PNX4008 only supports DAT_SE0 USB mode */ @@ -373,11 +297,22 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) struct usb_hcd *hcd = 0; struct ohci_hcd *ohci; const struct hc_driver *driver = &ohci_nxp_hc_driver; - struct i2c_adapter *i2c_adap; - struct i2c_board_info i2c_info; struct resource *res; - int ret = 0, irq; + struct device_node *isp1301_node; + + if (pdev->dev.of_node) { + isp1301_node = of_parse_phandle(pdev->dev.of_node, + "transceiver", 0); + } else { + isp1301_node = NULL; + } + + isp1301_i2c_client = isp1301_get_client(isp1301_node); + if (!isp1301_i2c_client) { + ret = -EPROBE_DEFER; + goto out; + } pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; @@ -392,28 +327,6 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) /* Enable AHB slave USB clock, needed for further USB clock control */ __raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL); - ret = i2c_add_driver(&isp1301_driver); - if (ret < 0) { - dev_err(&pdev->dev, "failed to add ISP1301 driver\n"); - goto out; - } - i2c_adap = i2c_get_adapter(2); - if (!i2c_adap) { - dev_err(&pdev->dev, "failed on i2c_get_adapter"); - goto out_i2c_driver; - } - - memset(&i2c_info, 0, sizeof(struct i2c_board_info)); - strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE); - isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info, - normal_i2c, NULL); - i2c_put_adapter(i2c_adap); - if (!isp1301_i2c_client) { - dev_err(&pdev->dev, "failed to connect I2C to ISP1301 USB Transceiver\n"); - ret = -ENODEV; - goto out_i2c_driver; - } - isp1301_configure(); /* Enable USB PLL */ @@ -495,10 +408,7 @@ out3: out2: clk_put(usb_clk); out1: - i2c_unregister_device(isp1301_i2c_client); isp1301_i2c_client = NULL; -out_i2c_driver: - i2c_del_driver(&isp1301_driver); out: return ret; } @@ -516,7 +426,6 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev) clk_put(usb_clk); i2c_unregister_device(isp1301_i2c_client); isp1301_i2c_client = NULL; - i2c_del_driver(&isp1301_driver); platform_set_drvdata(pdev, NULL); -- cgit v0.10.2 From 6a23ccd216b6a8ba2c67a9f9d8969b4431ad2920 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Mon, 16 Apr 2012 14:19:07 -0700 Subject: usb: usbtest: two super speed fixes for usbtest bMaxPacketSize0 field for super speed is a power of 2, not a count. The size itself is always 512. Max packet size for a super speed bulk endpoint is 1024, so allocate the urb size in halt_simple() accordingly. Signed-off-by: Paul Zimmerman Acked-by: Felipe Balbi Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 9dcb68f..055b84a 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1028,7 +1028,10 @@ test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param) case 13: /* short read, resembling case 10 */ req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0); /* last data packet "should" be DATA1, not DATA0 */ - len = 1024 - udev->descriptor.bMaxPacketSize0; + if (udev->speed == USB_SPEED_SUPER) + len = 1024 - 512; + else + len = 1024 - udev->descriptor.bMaxPacketSize0; expected = -EREMOTEIO; break; case 14: /* short read; try to fill the last packet */ @@ -1387,11 +1390,15 @@ static int test_halt(struct usbtest_dev *tdev, int ep, struct urb *urb) static int halt_simple(struct usbtest_dev *dev) { - int ep; - int retval = 0; - struct urb *urb; + int ep; + int retval = 0; + struct urb *urb; + struct usb_device *udev = testdev_to_usbdev(dev); - urb = simple_alloc_urb(testdev_to_usbdev(dev), 0, 512); + if (udev->speed == USB_SPEED_SUPER) + urb = simple_alloc_urb(udev, 0, 1024); + else + urb = simple_alloc_urb(udev, 0, 512); if (urb == NULL) return -ENOMEM; -- cgit v0.10.2 From 3b1f1ad6d1a2b4dcbc8f0ad27b6dd05c3ca79d0e Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 1 May 2012 17:39:11 -0400 Subject: usb: [MIPS] fix unresolved err() reference in host/ohci-au1xxx.c Commit af4e1ee04026908086d7ed252db2619a8ceaa333 (usb-next) "USB: remove err() macro" was preceeded by a tree-wide cleanup of users, however this one squeaked through the cracks because it had whitespace between the function name and the bracket for the args. Map it onto dev_err, just like all the "pre-commits" made in advance of af4e1ee04026, such as the example seen in the commit d57b177208b6ec20cacd7321ee32ef02f9f9e7fa: "USB: ohci-xls.c: remove err() usage" Build tested with the MIPS gpr_defconfig settings. Cc: Ralf Baechle Cc: Alan Stern Signed-off-by: Paul Gortmaker Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 4ea63b2..c611699 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -37,7 +37,8 @@ static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd) return ret; if ((ret = ohci_run(ohci)) < 0) { - err ("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s", + hcd->self.bus_name); ohci_stop(hcd); return ret; } -- cgit v0.10.2 From 50447d74fd2f402d5e4f3ab3fc362b5da273be10 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 1 May 2012 17:38:21 -0400 Subject: usb: [MIPS] fix unresolved err() reference in host/ohci-pnx8550.c Commit af4e1ee04026908086d7ed252db2619a8ceaa333 (usb-next) "USB: remove err() macro" was preceeded by a tree-wide cleanup of users, however this one squeaked through the cracks because it had whitespace between the function name and the bracket for the args. Map it onto dev_err, just like all the "pre-commits" made in advance of af4e1ee04026, such as the example seen in the commit d57b177208b6ec20cacd7321ee32ef02f9f9e7fa: "USB: ohci-xls.c: remove err() usage" Build tested with the MIPS pnx8550-jbs_defconfig settings. Cc: Ralf Baechle Cc: Alan Stern Signed-off-by: Paul Gortmaker Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c index f13d08f..148d27d 100644 --- a/drivers/usb/host/ohci-pnx8550.c +++ b/drivers/usb/host/ohci-pnx8550.c @@ -157,7 +157,8 @@ ohci_pnx8550_start (struct usb_hcd *hcd) return ret; if ((ret = ohci_run (ohci)) < 0) { - err ("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s", + hcd->self.bus_name); ohci_stop (hcd); return ret; } -- cgit v0.10.2 From ade749a6bde26511925c888d734c989c5bbec919 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 1 May 2012 17:36:54 -0400 Subject: usb: [ARM] fix unresolved err() reference in host/ohci-pxa27x.c Commit af4e1ee04026908086d7ed252db2619a8ceaa333 (usb-next) "USB: remove err() macro" was preceeded by a tree-wide cleanup of users, however this one squeaked through the cracks because it had whitespace between the function name and the bracket for the args. Map it onto dev_err, just like all the "pre-commits" made in advance of af4e1ee04026, such as the example seen in the commit d57b177208b6ec20cacd7321ee32ef02f9f9e7fa: "USB: ohci-xls.c: remove err() usage" Build tested with the ARM magician_defconfig settings. Cc: Eric Miao Cc: Russell King Cc: Alan Stern Signed-off-by: Paul Gortmaker Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index c31b281..e1a3cc6 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -419,7 +419,8 @@ ohci_pxa27x_start (struct usb_hcd *hcd) return ret; if ((ret = ohci_run (ohci)) < 0) { - err ("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s", + hcd->self.bus_name); ohci_stop (hcd); return ret; } -- cgit v0.10.2 From d331efdd993f4c392f5f63f970b3a55996e3a959 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 18:40:57 -0400 Subject: USB: input: joystick: iforce: fix up dev_err() usages We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c index 137326a..68f5f1e 100644 --- a/drivers/input/joystick/iforce/iforce-packets.c +++ b/drivers/input/joystick/iforce/iforce-packets.c @@ -257,7 +257,7 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet) status = usb_submit_urb(iforce->ctrl, GFP_ATOMIC); if (status) { - dev_err(&iforce->usbdev->dev, + dev_err(&iforce->dev->dev, "usb_submit_urb failed %d\n", status); return -1; } diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index ecbfae7..86d3538 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -100,7 +100,7 @@ static void iforce_usb_irq(struct urb *urb) exit: status = usb_submit_urb (urb, GFP_ATOMIC); if (status) - dev_err(&iforce->usbdev->dev, + dev_err(&iforce->dev->dev, "%s - usb_submit_urb failed with result %d\n", __func__, status); } -- cgit v0.10.2 From 39e85a2673c0c9696939dbe10e79c2fb4b91b91c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 20:56:34 -0400 Subject: USB: input: xpad.c: fix up dev_err() usage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov CC: "Magnus Hörlin" CC: Rusty Russell CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index bee9c00..d760031 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -492,7 +492,7 @@ static void xpad_irq_in(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&xpad->udev->dev, + dev_err(&xpad->dev->dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } @@ -542,7 +542,7 @@ static void xpad_irq_out(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&xpad->udev->dev, + dev_err(&xpad->dev->dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } -- cgit v0.10.2 From 388fd2026633acf2a23fcb7918ba24d9d646bcfb Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 20:56:38 -0400 Subject: USB: input: cm109.c: fix up dev_err() usage We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov CC: Axel Lin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index 412fe57..9e76ab1 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -327,7 +327,7 @@ static void cm109_submit_buzz_toggle(struct cm109_dev *dev) error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); if (error) - dev_err(&dev->intf->dev, + dev_err(&dev->idev->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", __func__, error); } @@ -351,7 +351,7 @@ static void cm109_urb_irq_callback(struct urb *urb) if (status) { if (status == -ESHUTDOWN) return; - dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status); + dev_err(&dev->idev->dev, "%s: urb status %d\n", __func__, status); } /* Special keys */ @@ -398,7 +398,7 @@ static void cm109_urb_irq_callback(struct urb *urb) error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); if (error) - dev_err(&dev->intf->dev, + dev_err(&dev->idev->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", __func__, error); } @@ -419,7 +419,7 @@ static void cm109_urb_ctl_callback(struct urb *urb) dev->ctl_data->byte[3]); if (status) - dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status); + dev_err(&dev->idev->dev, "%s: urb status %d\n", __func__, status); spin_lock(&dev->ctl_submit_lock); @@ -436,7 +436,7 @@ static void cm109_urb_ctl_callback(struct urb *urb) dev->irq_urb_pending = 1; error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC); if (error) - dev_err(&dev->intf->dev, + dev_err(&dev->idev->dev, "%s: usb_submit_urb (urb_irq) failed %d\n", __func__, error); } @@ -480,7 +480,7 @@ static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on) dev->ctl_data, USB_PKT_LEN, USB_CTRL_SET_TIMEOUT); if (error < 0 && error != -EINTR) - dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n", + dev_err(&dev->idev->dev, "%s: usb_control_msg() failed %d\n", __func__, error); } -- cgit v0.10.2 From 3b449fe5d5585a43f26bda4c3d86b7677d4c80db Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 20:56:41 -0400 Subject: USB: input: keyspan_remote.c: fix up dev_err() usage We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c index 9a45c88..7f017d4 100644 --- a/drivers/input/misc/keyspan_remote.c +++ b/drivers/input/misc/keyspan_remote.c @@ -267,7 +267,7 @@ static void keyspan_check_data(struct usb_keyspan *remote) remote->data.tester = remote->data.tester >> 6; remote->data.bits_left -= 6; } else { - dev_err(&remote->udev->dev, + dev_err(&remote->input->dev, "%s - Unknown sequence found in system data.\n", __func__); remote->stage = 0; @@ -288,7 +288,7 @@ static void keyspan_check_data(struct usb_keyspan *remote) remote->data.tester = remote->data.tester >> 6; remote->data.bits_left -= 6; } else { - dev_err(&remote->udev->dev, + dev_err(&remote->input->dev, "%s - Unknown sequence found in button data.\n", __func__); remote->stage = 0; @@ -306,7 +306,7 @@ static void keyspan_check_data(struct usb_keyspan *remote) remote->data.tester = remote->data.tester >> 6; remote->data.bits_left -= 6; } else { - dev_err(&remote->udev->dev, + dev_err(&remote->input->dev, "%s - Error in message, invalid toggle.\n", __func__); remote->stage = 0; @@ -318,7 +318,7 @@ static void keyspan_check_data(struct usb_keyspan *remote) remote->data.tester = remote->data.tester >> 5; remote->data.bits_left -= 5; } else { - dev_err(&remote->udev->dev, + dev_err(&remote->input->dev, "Bad message received, no stop bit found.\n"); } @@ -404,7 +404,7 @@ static void keyspan_irq_recv(struct urb *urb) resubmit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&dev->udev->dev, + dev_err(&dev->input->dev, "%s - usb_submit_urb failed with result: %d\n", __func__, retval); } -- cgit v0.10.2 From 6b37dbba5d5f4e167eb5ca57e43c1bd49a696831 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 20:56:45 -0400 Subject: USB: input: powermate.c: fix up dev_err() usage We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c index 71ec621..3091b82 100644 --- a/drivers/input/misc/powermate.c +++ b/drivers/input/misc/powermate.c @@ -110,7 +110,7 @@ static void powermate_irq(struct urb *urb) exit: retval = usb_submit_urb (urb, GFP_ATOMIC); if (retval) - dev_err(&pm->udev->dev, + dev_err(&pm->input->dev, "%s - usb_submit_urb failed with result: %d\n", __func__, retval); } -- cgit v0.10.2 From aa330384a6444682126de5dd49982fa428badd08 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 20:56:46 -0400 Subject: USB: input: yealink.c: fix up dev_err() usage We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov CC: Henk Vergonet Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c index 4984823..9f71bb1 100644 --- a/drivers/input/misc/yealink.c +++ b/drivers/input/misc/yealink.c @@ -428,7 +428,7 @@ static void urb_irq_callback(struct urb *urb) int ret, status = urb->status; if (status) - dev_err(&yld->udev->dev, "%s - urb status %d\n", + dev_err(&yld->idev->dev, "%s - urb status %d\n", __func__, status); switch (yld->irq_data->cmd) { @@ -444,7 +444,7 @@ static void urb_irq_callback(struct urb *urb) break; default: - dev_err(&yld->udev->dev, "unexpected response %x\n", + dev_err(&yld->idev->dev, "unexpected response %x\n", yld->irq_data->cmd); } @@ -453,7 +453,7 @@ static void urb_irq_callback(struct urb *urb) if (!yld->shutdown) { ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC); if (ret && ret != -EPERM) - dev_err(&yld->udev->dev, + dev_err(&yld->idev->dev, "%s - usb_submit_urb failed %d\n", __func__, ret); } @@ -465,7 +465,7 @@ static void urb_ctl_callback(struct urb *urb) int ret = 0, status = urb->status; if (status) - dev_err(&yld->udev->dev, "%s - urb status %d\n", + dev_err(&yld->idev->dev, "%s - urb status %d\n", __func__, status); switch (yld->ctl_data->cmd) { @@ -484,7 +484,7 @@ static void urb_ctl_callback(struct urb *urb) } if (ret && ret != -EPERM) - dev_err(&yld->udev->dev, "%s - usb_submit_urb failed %d\n", + dev_err(&yld->idev->dev, "%s - usb_submit_urb failed %d\n", __func__, ret); } -- cgit v0.10.2 From 80f8594f63dd35179235aa22901dfa5ce786fe00 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 20:56:47 -0400 Subject: USB: input: appletouch.c: fix up dev_err() usage We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov CC: Alessandro Rubini Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 90db679..a5f1547 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -253,8 +253,9 @@ MODULE_PARM_DESC(debug, "Activate debugging output"); * packets (Report ID 2). This code changes device mode, so it * sends raw sensor reports (Report ID 5). */ -static int atp_geyser_init(struct usb_device *udev) +static int atp_geyser_init(struct atp *dev) { + struct usb_device *udev = dev->udev; char *data; int size; int i; @@ -262,7 +263,7 @@ static int atp_geyser_init(struct usb_device *udev) data = kmalloc(8, GFP_KERNEL); if (!data) { - dev_err(&udev->dev, "Out of memory\n"); + dev_err(&dev->input->dev, "Out of memory\n"); return -ENOMEM; } @@ -277,7 +278,7 @@ static int atp_geyser_init(struct usb_device *udev) for (i = 0; i < 8; i++) dprintk("appletouch[%d]: %d\n", i, data[i]); - dev_err(&udev->dev, "Failed to read mode from device.\n"); + dev_err(&dev->input->dev, "Failed to read mode from device.\n"); ret = -EIO; goto out_free; } @@ -296,7 +297,7 @@ static int atp_geyser_init(struct usb_device *udev) for (i = 0; i < 8; i++) dprintk("appletouch[%d]: %d\n", i, data[i]); - dev_err(&udev->dev, "Failed to request geyser raw mode\n"); + dev_err(&dev->input->dev, "Failed to request geyser raw mode\n"); ret = -EIO; goto out_free; } @@ -313,15 +314,14 @@ out_free: static void atp_reinit(struct work_struct *work) { struct atp *dev = container_of(work, struct atp, work); - struct usb_device *udev = dev->udev; int retval; dprintk("appletouch: putting appletouch to sleep (reinit)\n"); - atp_geyser_init(udev); + atp_geyser_init(dev); retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) - dev_err(&udev->dev, + dev_err(&dev->input->dev, "atp_reinit: usb_submit_urb failed with error %d\n", retval); } @@ -589,7 +589,7 @@ static void atp_complete_geyser_1_2(struct urb *urb) exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) - dev_err(&dev->udev->dev, + dev_err(&dev->input->dev, "atp_complete: usb_submit_urb failed with result %d\n", retval); } @@ -724,7 +724,7 @@ static void atp_complete_geyser_3_4(struct urb *urb) exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) - dev_err(&dev->udev->dev, + dev_err(&dev->input->dev, "atp_complete: usb_submit_urb failed with result %d\n", retval); } @@ -751,14 +751,12 @@ static void atp_close(struct input_dev *input) static int atp_handle_geyser(struct atp *dev) { - struct usb_device *udev = dev->udev; - if (dev->info != &fountain_info) { /* switch to raw sensor mode */ - if (atp_geyser_init(udev)) + if (atp_geyser_init(dev)) return -EIO; - printk(KERN_INFO "appletouch: Geyser mode initialized.\n"); + dev_info(&dev->input->dev, "Geyser mode initialized.\n"); } return 0; -- cgit v0.10.2 From 140b1230a19b65489317271da36465e42865f2e4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 20:56:47 -0400 Subject: USB: input: bcm5974.c: fix up dev_err() usage We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov CC: Henrik Rydberg CC: Alessandro Rubini Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 8cd7c93..e2e8d81 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -584,7 +584,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) int retval = 0, size; if (!data) { - dev_err(&dev->intf->dev, "out of memory\n"); + dev_err(&dev->input->dev, "out of memory\n"); retval = -ENOMEM; goto out; } @@ -597,7 +597,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { - dev_err(&dev->intf->dev, "could not read from device\n"); + dev_err(&dev->input->dev, "could not read from device\n"); retval = -EIO; goto out; } @@ -615,7 +615,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { - dev_err(&dev->intf->dev, "could not write to device\n"); + dev_err(&dev->input->dev, "could not write to device\n"); retval = -EIO; goto out; } @@ -654,7 +654,7 @@ static void bcm5974_irq_button(struct urb *urb) exit: error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC); if (error) - dev_err(&dev->intf->dev, "button urb failed: %d\n", error); + dev_err(&dev->input->dev, "button urb failed: %d\n", error); } static void bcm5974_irq_trackpad(struct urb *urb) @@ -687,7 +687,7 @@ static void bcm5974_irq_trackpad(struct urb *urb) exit: error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC); if (error) - dev_err(&dev->intf->dev, "trackpad urb failed: %d\n", error); + dev_err(&dev->input->dev, "trackpad urb failed: %d\n", error); } /* -- cgit v0.10.2 From b30662c4721ea77ca5930dd60f3294cd1413067f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 20:56:51 -0400 Subject: USB: input: acecad.c: fix up dev_err() usage We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c index da6c341..a81a2b0 100644 --- a/drivers/input/tablet/acecad.c +++ b/drivers/input/tablet/acecad.c @@ -105,7 +105,7 @@ static void usb_acecad_irq(struct urb *urb) resubmit: status = usb_submit_urb(urb, GFP_ATOMIC); if (status) - dev_err(&acecad->usbdev->dev, + dev_err(&dev->dev, "can't resubmit intr, %s-%s/input0, status %d\n", acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status); -- cgit v0.10.2 From 383c52f3388b5ddb2fbf1ec073081bc9c4bdfeff Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 20:56:56 -0400 Subject: USB: input: aiptek.c: fix up dev_err() usage We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov CC: Jesper Juhl CC: JJ Ding CC: Edwin van Vliet Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index b8d43eb..dc16bfd 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -811,7 +811,7 @@ static void aiptek_irq(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval != 0) { - dev_err(&aiptek->usbdev->dev, + dev_err(&inputdev->dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } -- cgit v0.10.2 From 88d5ab3a1817bcfe192ae79ef85ef3fb3e8c6669 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 20:57:00 -0400 Subject: USB: input: gtco.c: fix up dev_err() usage We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c index fed555b..9372153 100644 --- a/drivers/input/tablet/gtco.c +++ b/drivers/input/tablet/gtco.c @@ -806,7 +806,7 @@ static void gtco_urb_callback(struct urb *urbinfo) resubmit: rc = usb_submit_urb(urbinfo, GFP_ATOMIC); if (rc != 0) - dev_err(&device->usbdev->dev, + dev_err(&inputdev->dev, "usb_submit_urb failed rc=0x%x\n", rc); } -- cgit v0.10.2 From 3415b57cb3d7b6b6cd5fcbf5f3f64ca28a3f95e2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 20:57:03 -0400 Subject: USB: input: kbtab.c: fix up dev_err() usage We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c index 1eb6341..be717d7 100644 --- a/drivers/input/tablet/kbtab.c +++ b/drivers/input/tablet/kbtab.c @@ -80,7 +80,7 @@ static void kbtab_irq(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&kbtab->usbdev->dev, + dev_err(&dev->dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } -- cgit v0.10.2 From 1b5ca928e7d09c5ce0cefe6aec7392e4a3aa1d3b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 20:57:07 -0400 Subject: USB: input: wacom_sys.c: fix up dev_err() usage We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov CC: Ping Cheng CC: Chris Bagwell CC: Eduard Hasenleithner Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 3db4684..821d2a9 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -122,7 +122,7 @@ static void wacom_sys_irq(struct urb *urb) usb_mark_last_busy(wacom->usbdev); retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&wacom->intf->dev, + dev_err(&wacom->wacom_wac.input->dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } @@ -818,7 +818,7 @@ static int wacom_initialize_leds(struct wacom *wacom) } if (error) { - dev_err(&wacom->intf->dev, + dev_err(&wacom->wacom_wac.input->dev, "cannot create sysfs group err: %d\n", error); return error; } -- cgit v0.10.2 From f864b60ad0078b74c765f00f0600588b85c0a239 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 20:57:11 -0400 Subject: USB: input: usbtouchscreen.c: fix up dev_err() usage We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov CC: Henrik Rydberg CC: Rusty Russell CC: Viresh Kumar CC: Armando Visconti Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 955441c..4127cf7 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -1380,7 +1380,7 @@ exit: usb_mark_last_busy(interface_to_usbdev(usbtouch->interface)); retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&usbtouch->interface->dev, + dev_err(&usbtouch->input->dev, "%s - usb_submit_urb failed with result: %d\n", __func__, retval); } @@ -1623,7 +1623,7 @@ static int usbtouch_probe(struct usb_interface *intf, err = usb_submit_urb(usbtouch->irq, GFP_KERNEL); if (err) { usb_autopm_put_interface(intf); - dev_err(&intf->dev, + dev_err(&input_dev->dev, "%s - usb_submit_urb failed with result: %d\n", __func__, err); goto out_unregister_input; -- cgit v0.10.2 From 3b6aee237e889a189fd8c558207ca0e55818f744 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:24:28 -0700 Subject: USB: wacom: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Cc: Dmitry Torokhov Cc: Ping Cheng Cc: Eduard Hasenleithner Cc: Chris Bagwell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 821d2a9..ac29a68 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -99,6 +99,7 @@ static int wacom_set_report(struct usb_interface *intf, u8 type, u8 id, static void wacom_sys_irq(struct urb *urb) { struct wacom *wacom = urb->context; + struct device *dev = &wacom->wacom_wac.input->dev; int retval; switch (urb->status) { @@ -109,10 +110,12 @@ static void wacom_sys_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, urb->status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, urb->status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", + __func__, urb->status); goto exit; } @@ -122,8 +125,7 @@ static void wacom_sys_irq(struct urb *urb) usb_mark_last_busy(wacom->usbdev); retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&wacom->wacom_wac.input->dev, - "%s - usb_submit_urb failed with result %d\n", + dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index cecd35c..b327790 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -76,7 +76,8 @@ static int wacom_pl_irq(struct wacom_wac *wacom) int prox, pressure; if (data[0] != WACOM_REPORT_PENABLED) { - dbg("wacom_pl_irq: received unknown report #%d", data[0]); + dev_dbg(&input->dev, + "wacom_pl_irq: received unknown report #%d\n", data[0]); return 0; } @@ -175,7 +176,7 @@ static int wacom_dtu_irq(struct wacom_wac *wacom) struct input_dev *input = wacom->input; int prox = data[1] & 0x20, pressure; - dbg("wacom_dtu_irq: received report #%d", data[0]); + dev_dbg(&input->dev, "wacom_dtu_irq: received report #%d\n", data[0]); if (prox) { /* Going into proximity select tool */ @@ -211,7 +212,9 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) int retval = 0; if (data[0] != WACOM_REPORT_PENABLED) { - dbg("wacom_graphire_irq: received unknown report #%d", data[0]); + dev_dbg(&input->dev, + "wacom_graphire_irq: received unknown report #%d\n", + data[0]); goto exit; } @@ -484,7 +487,9 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_INTUOSREAD && data[0] != WACOM_REPORT_INTUOSWRITE && data[0] != WACOM_REPORT_INTUOSPAD) { - dbg("wacom_intuos_irq: received unknown report #%d", data[0]); + dev_dbg(&input->dev, + "wacom_intuos_irq: received unknown report #%d\n", + data[0]); return 0; } @@ -830,7 +835,8 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) { char *data = wacom->data; - dbg("wacom_tpc_irq: received report #%d", data[0]); + dev_dbg(&wacom->input->dev, "wacom_tpc_irq: received report #%d\n", + data[0]); switch (len) { case WACOM_PKGLEN_TPC1FG: -- cgit v0.10.2 From f576125dc872f28da2f89c29bfc73ec0ff02f7d9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:26:05 -0700 Subject: USB: iforce: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Cc: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c index 68f5f1e..0d8f53b 100644 --- a/drivers/input/joystick/iforce/iforce-packets.c +++ b/drivers/input/joystick/iforce/iforce-packets.c @@ -266,12 +266,14 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet) iforce->ctrl->status != -EINPROGRESS, HZ); if (iforce->ctrl->status) { - dbg("iforce->ctrl->status = %d", iforce->ctrl->status); + dev_dbg(&iforce->dev->dev, + "iforce->ctrl->status = %d\n", + iforce->ctrl->status); usb_unlink_urb(iforce->ctrl); return -1; } #else - dbg("iforce_get_id_packet: iforce->bus = USB!"); + printk(KERN_DEBUG "iforce_get_id_packet: iforce->bus = USB!\n"); #endif } break; diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 86d3538..15e8d65 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -76,6 +76,7 @@ void iforce_usb_xmit(struct iforce *iforce) static void iforce_usb_irq(struct urb *urb) { struct iforce *iforce = urb->context; + struct device *dev = &iforce->dev->dev; int status; switch (urb->status) { @@ -86,11 +87,12 @@ static void iforce_usb_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, urb->status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); return; default: - dbg("%s - urb has status of: %d", __func__, urb->status); + dev_dbg(dev, "%s - urb has status of: %d\n", + __func__, urb->status); goto exit; } @@ -100,8 +102,7 @@ static void iforce_usb_irq(struct urb *urb) exit: status = usb_submit_urb (urb, GFP_ATOMIC); if (status) - dev_err(&iforce->dev->dev, - "%s - usb_submit_urb failed with result %d\n", + dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, status); } @@ -111,7 +112,8 @@ static void iforce_usb_out(struct urb *urb) if (urb->status) { clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); - dbg("urb->status %d, exiting", urb->status); + dev_dbg(&iforce->dev->dev, "urb->status %d, exiting\n", + urb->status); return; } -- cgit v0.10.2 From 6cc203d77eb4a29a148ec598048ab1b97e83160c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:32:55 -0700 Subject: USB: hid-core.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Jiri Kosina Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 4bbb883..340d6ae 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -203,7 +203,7 @@ static int usbhid_restart_out_queue(struct usbhid_device *usbhid) return 0; if ((kicked = (usbhid->outhead != usbhid->outtail))) { - dbg("Kicking head %d tail %d", usbhid->outhead, usbhid->outtail); + hid_dbg(hid, "Kicking head %d tail %d", usbhid->outhead, usbhid->outtail); r = usb_autopm_get_interface_async(usbhid->intf); if (r < 0) @@ -230,7 +230,7 @@ static int usbhid_restart_ctrl_queue(struct usbhid_device *usbhid) return 0; if ((kicked = (usbhid->ctrlhead != usbhid->ctrltail))) { - dbg("Kicking head %d tail %d", usbhid->ctrlhead, usbhid->ctrltail); + hid_dbg(hid, "Kicking head %d tail %d", usbhid->ctrlhead, usbhid->ctrltail); r = usb_autopm_get_interface_async(usbhid->intf); if (r < 0) -- cgit v0.10.2 From c4f0bbcd1d53dc40e2ac56f2ab116f9ba612a8ee Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:32:59 -0700 Subject: USB: xpad.c: remove dbg() usage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov CC: "Magnus Hörlin" CC: Rusty Russell CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index d760031..2e106b0 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -457,6 +457,7 @@ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned cha static void xpad_irq_in(struct urb *urb) { struct usb_xpad *xpad = urb->context; + struct device *dev = &xpad->dev->dev; int retval, status; status = urb->status; @@ -469,11 +470,11 @@ static void xpad_irq_in(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", + dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", + dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } @@ -492,13 +493,15 @@ static void xpad_irq_in(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&xpad->dev->dev, - "%s - usb_submit_urb failed with result %d\n", + dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } static void xpad_bulk_out(struct urb *urb) { + struct usb_xpad *xpad = urb->context; + struct device *dev = &xpad->dev->dev; + switch (urb->status) { case 0: /* success */ @@ -507,10 +510,12 @@ static void xpad_bulk_out(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, urb->status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); break; default: - dbg("%s - nonzero urb status received: %d", __func__, urb->status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", + __func__, urb->status); } } @@ -518,6 +523,7 @@ static void xpad_bulk_out(struct urb *urb) static void xpad_irq_out(struct urb *urb) { struct usb_xpad *xpad = urb->context; + struct device *dev = &xpad->dev->dev; int retval, status; status = urb->status; @@ -531,19 +537,20 @@ static void xpad_irq_out(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", + __func__, status); goto exit; } exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&xpad->dev->dev, - "%s - usb_submit_urb failed with result %d\n", + dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } @@ -657,7 +664,8 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect return usb_submit_urb(xpad->irq_out, GFP_ATOMIC); default: - dbg("%s - rumble command sent to unsupported xpad type: %d", + dev_dbg(&xpad->dev->dev, + "%s - rumble command sent to unsupported xpad type: %d\n", __func__, xpad->xtype); return -1; } -- cgit v0.10.2 From 8b0725c0593871106d24ed94e7a14cf2316cb21d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:03 -0700 Subject: USB: powermate.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c index 3091b82..d16717e 100644 --- a/drivers/input/misc/powermate.c +++ b/drivers/input/misc/powermate.c @@ -85,6 +85,7 @@ static void powermate_config_complete(struct urb *urb); static void powermate_irq(struct urb *urb) { struct powermate_device *pm = urb->context; + struct device *dev = &pm->input->dev; int retval; switch (urb->status) { @@ -95,10 +96,12 @@ static void powermate_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, urb->status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, urb->status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", + __func__, urb->status); goto exit; } @@ -110,8 +113,7 @@ static void powermate_irq(struct urb *urb) exit: retval = usb_submit_urb (urb, GFP_ATOMIC); if (retval) - dev_err(&pm->input->dev, - "%s - usb_submit_urb failed with result: %d\n", + dev_err(dev, "%s - usb_submit_urb failed with result: %d\n", __func__, retval); } -- cgit v0.10.2 From 938476f9237ee97480ddb091c06d67851bb4d7e9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:03 -0700 Subject: USB: yealink.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Henk Vergonet CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c index 9f71bb1..37b126c 100644 --- a/drivers/input/misc/yealink.c +++ b/drivers/input/misc/yealink.c @@ -438,7 +438,8 @@ static void urb_irq_callback(struct urb *urb) break; case CMD_SCANCODE: - dbg("get scancode %x", yld->irq_data->data[0]); + dev_dbg(&yld->idev->dev, "get scancode %x\n", + yld->irq_data->data[0]); report_key(yld, map_p1k_to_key(yld->irq_data->data[0])); break; @@ -517,7 +518,7 @@ static int input_open(struct input_dev *dev) struct yealink_dev *yld = input_get_drvdata(dev); int i, ret; - dbg("%s", __func__); + dev_dbg(&yld->idev->dev, "%s\n", __func__); /* force updates to device */ for (i = 0; imaster); i++) @@ -532,8 +533,9 @@ static int input_open(struct input_dev *dev) yld->ctl_data->size = 10; yld->ctl_data->sum = 0x100-CMD_INIT-10; if ((ret = usb_submit_urb(yld->urb_ctl, GFP_KERNEL)) != 0) { - dbg("%s - usb_submit_urb failed with result %d", - __func__, ret); + dev_dbg(&yld->idev->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, ret); return ret; } return 0; -- cgit v0.10.2 From 67946d136879a129fccd35b79a87e1f05ace148e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:04 -0700 Subject: USB: appletouch.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alessandro Rubini CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index a5f1547..d0a590f 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -401,6 +401,7 @@ static inline void atp_report_fingers(struct input_dev *input, int fingers) static int atp_status_check(struct urb *urb) { struct atp *dev = urb->context; + struct input_dev *idev = dev->input; switch (urb->status) { case 0: @@ -408,8 +409,8 @@ static int atp_status_check(struct urb *urb) break; case -EOVERFLOW: if (!dev->overflow_warned) { - printk(KERN_WARNING "appletouch: OVERFLOW with data " - "length %d, actual length is %d\n", + dev_warn(&idev->dev, + "appletouch: OVERFLOW with data length %d, actual length is %d\n", dev->info->datalen, dev->urb->actual_length); dev->overflow_warned = true; } @@ -417,13 +418,15 @@ static int atp_status_check(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* This urb is terminated, clean up */ - dbg("atp_complete: urb shutting down with status: %d", - urb->status); + dev_dbg(&idev->dev, + "atp_complete: urb shutting down with status: %d\n", + urb->status); return ATP_URB_STATUS_ERROR_FATAL; default: - dbg("atp_complete: nonzero urb status received: %d", - urb->status); + dev_dbg(&idev->dev, + "atp_complete: nonzero urb status received: %d\n", + urb->status); return ATP_URB_STATUS_ERROR; } @@ -446,7 +449,8 @@ static void atp_detect_size(struct atp *dev) for (i = dev->info->xsensors; i < ATP_XSENSORS; i++) { if (dev->xy_cur[i]) { - printk(KERN_INFO "appletouch: 17\" model detected.\n"); + dev_info(&dev->input->dev, + "appletouch: 17\" model detected.\n"); input_set_abs_params(dev->input, ABS_X, 0, (dev->info->xsensors_17 - 1) * -- cgit v0.10.2 From bd028769f741b88dc06831bfe7edb181671758ea Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:05 -0700 Subject: USB: bcm5974.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Henrik Rydberg CC: Alessandro Rubini CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index e2e8d81..e32928e 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -631,6 +631,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) static void bcm5974_irq_button(struct urb *urb) { struct bcm5974 *dev = urb->context; + struct input_dev *idev = dev->input; int error; switch (urb->status) { @@ -640,10 +641,11 @@ static void bcm5974_irq_button(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dbg("bcm5974: button urb shutting down: %d", urb->status); + dev_dbg(&idev->dev, "button urb shutting down: %d\n", + urb->status); return; default: - dbg("bcm5974: button urb status: %d", urb->status); + dev_dbg(&idev->dev, "button urb status: %d\n", urb->status); goto exit; } @@ -654,12 +656,13 @@ static void bcm5974_irq_button(struct urb *urb) exit: error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC); if (error) - dev_err(&dev->input->dev, "button urb failed: %d\n", error); + dev_err(&idev->dev, "button urb failed: %d\n", error); } static void bcm5974_irq_trackpad(struct urb *urb) { struct bcm5974 *dev = urb->context; + struct input_dev *idev = dev->input; int error; switch (urb->status) { @@ -669,10 +672,11 @@ static void bcm5974_irq_trackpad(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dbg("bcm5974: trackpad urb shutting down: %d", urb->status); + dev_dbg(&idev->dev, "trackpad urb shutting down: %d\n", + urb->status); return; default: - dbg("bcm5974: trackpad urb status: %d", urb->status); + dev_dbg(&idev->dev, "trackpad urb status: %d\n", urb->status); goto exit; } @@ -687,7 +691,7 @@ static void bcm5974_irq_trackpad(struct urb *urb) exit: error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC); if (error) - dev_err(&dev->input->dev, "trackpad urb failed: %d\n", error); + dev_err(&idev->dev, "trackpad urb failed: %d\n", error); } /* -- cgit v0.10.2 From eeba1ae13cbddc6e9cbc4adcd0d9fd686ba09f5f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:09 -0700 Subject: USB: acecad.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c index a81a2b0..baa9d4a 100644 --- a/drivers/input/tablet/acecad.c +++ b/drivers/input/tablet/acecad.c @@ -73,10 +73,12 @@ static void usb_acecad_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, urb->status); + dev_dbg(&dev->dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, urb->status); + dev_dbg(&dev->dev, "%s - nonzero urb status received: %d\n", + __func__, urb->status); goto resubmit; } -- cgit v0.10.2 From 8fb6321b6bd9ebcc03243f27fe98e18e246a5c97 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:12 -0700 Subject: USB: aiptek.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov CC: Jesper Juhl CC: JJ Ding CC: Edwin van Vliet Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index dc16bfd..37dba76 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -447,13 +447,15 @@ static void aiptek_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* This urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, urb->status); + dev_dbg(&inputdev->dev, + "%s - urb shutting down with status: %d\n", + __func__, urb->status); return; default: - dbg("%s - nonzero urb status received: %d", - __func__, urb->status); + dev_dbg(&inputdev->dev, + "%s - nonzero urb status received: %d\n", + __func__, urb->status); goto exit; } @@ -785,7 +787,7 @@ static void aiptek_irq(struct urb *urb) 1 | AIPTEK_REPORT_TOOL_UNKNOWN); input_sync(inputdev); } else { - dbg("Unknown report %d", data[0]); + dev_dbg(&inputdev->dev, "Unknown report %d\n", data[0]); } /* Jitter may occur when the user presses a button on the stlyus @@ -913,8 +915,9 @@ aiptek_command(struct aiptek *aiptek, unsigned char command, unsigned char data) if ((ret = aiptek_set_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) { - dbg("aiptek_program: failed, tried to send: 0x%02x 0x%02x", - command, data); + dev_dbg(&aiptek->inputdev->dev, + "aiptek_program: failed, tried to send: 0x%02x 0x%02x\n", + command, data); } kfree(buf); return ret < 0 ? ret : 0; @@ -948,8 +951,9 @@ aiptek_query(struct aiptek *aiptek, unsigned char command, unsigned char data) if ((ret = aiptek_get_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) { - dbg("aiptek_query failed: returned 0x%02x 0x%02x 0x%02x", - buf[0], buf[1], buf[2]); + dev_dbg(&aiptek->inputdev->dev, + "aiptek_query failed: returned 0x%02x 0x%02x 0x%02x\n", + buf[0], buf[1], buf[2]); ret = -EIO; } else { ret = get_unaligned_le16(buf + 1); -- cgit v0.10.2 From c6f880a7812766b896edcba51ac8a449ff5d4320 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:16 -0700 Subject: USB: gtco.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c index 9372153..422b1a2 100644 --- a/drivers/input/tablet/gtco.c +++ b/drivers/input/tablet/gtco.c @@ -200,6 +200,7 @@ struct hid_descriptor static void parse_hid_report_descriptor(struct gtco *device, char * report, int length) { + struct device *ddev = &device->inputdevice->dev; int x, i = 0; /* Tag primitive vars */ @@ -226,7 +227,7 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report, char indentstr[10] = ""; - dbg("======>>>>>>PARSE<<<<<<======"); + dev_dbg(ddev, "======>>>>>>PARSE<<<<<<======\n"); /* Walk this report and pull out the info we need */ while (i < length) { @@ -275,11 +276,11 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report, else if (data == 3) strcpy(globtype, "Var|Const"); - dbg("::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits", - globalval[TAG_GLOB_REPORT_ID], inputnum, - globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX], - globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN], - globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]); + dev_dbg(ddev, "::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits\n", + globalval[TAG_GLOB_REPORT_ID], inputnum, + globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX], + globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN], + globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]); /* @@ -290,7 +291,7 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report, */ switch (inputnum) { case 0: /* X coord */ - dbg("GER: X Usage: 0x%x", usage); + dev_dbg(ddev, "GER: X Usage: 0x%x\n", usage); if (device->max_X == 0) { device->max_X = globalval[TAG_GLOB_LOG_MAX]; device->min_X = globalval[TAG_GLOB_LOG_MIN]; @@ -298,7 +299,7 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report, break; case 1: /* Y coord */ - dbg("GER: Y Usage: 0x%x", usage); + dev_dbg(ddev, "GER: Y Usage: 0x%x\n", usage); if (device->max_Y == 0) { device->max_Y = globalval[TAG_GLOB_LOG_MAX]; device->min_Y = globalval[TAG_GLOB_LOG_MIN]; @@ -348,10 +349,10 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report, maintype = 'S'; if (data == 0) { - dbg("======>>>>>> Physical"); + dev_dbg(ddev, "======>>>>>> Physical\n"); strcpy(globtype, "Physical"); } else - dbg("======>>>>>>"); + dev_dbg(ddev, "======>>>>>>\n"); /* Indent the debug output */ indent++; @@ -366,7 +367,7 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report, break; case TAG_MAIN_COL_END: - dbg("<<<<<<======"); + dev_dbg(ddev, "<<<<<<======\n"); maintype = 'E'; indent--; for (x = 0; x < indent; x++) @@ -382,18 +383,18 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report, switch (size) { case 1: - dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", - indentstr, tag, maintype, size, globtype, data); + dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n", + indentstr, tag, maintype, size, globtype, data); break; case 2: - dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", - indentstr, tag, maintype, size, globtype, data16); + dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n", + indentstr, tag, maintype, size, globtype, data16); break; case 4: - dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", - indentstr, tag, maintype, size, globtype, data32); + dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n", + indentstr, tag, maintype, size, globtype, data32); break; } break; @@ -463,26 +464,26 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report, if (tag < TAG_GLOB_MAX) { switch (size) { case 1: - dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x", - indentstr, globtype, tag, size, data); + dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n", + indentstr, globtype, tag, size, data); globalval[tag] = data; break; case 2: - dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x", - indentstr, globtype, tag, size, data16); + dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n", + indentstr, globtype, tag, size, data16); globalval[tag] = data16; break; case 4: - dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x", - indentstr, globtype, tag, size, data32); + dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n", + indentstr, globtype, tag, size, data32); globalval[tag] = data32; break; } } else { - dbg("%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d ", - indentstr, tag, size); + dev_dbg(ddev, "%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d\n", + indentstr, tag, size); } break; @@ -509,18 +510,18 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report, switch (size) { case 1: - dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", - indentstr, tag, globtype, size, data); + dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n", + indentstr, tag, globtype, size, data); break; case 2: - dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", - indentstr, tag, globtype, size, data16); + dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n", + indentstr, tag, globtype, size, data16); break; case 4: - dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", - indentstr, tag, globtype, size, data32); + dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n", + indentstr, tag, globtype, size, data32); break; } @@ -712,8 +713,9 @@ static void gtco_urb_callback(struct urb *urbinfo) * the rest as 0 */ val = device->buffer[5] & MASK_BUTTON; - dbg("======>>>>>>REPORT 1: val 0x%X(%d)", - val, val); + dev_dbg(&inputdev->dev, + "======>>>>>>REPORT 1: val 0x%X(%d)\n", + val, val); /* * We don't apply any meaning to the button @@ -872,14 +874,14 @@ static int gtco_probe(struct usb_interface *usbinterface, endpoint = &usbinterface->altsetting[0].endpoint[0].desc; /* Some debug */ - dbg("gtco # interfaces: %d", usbinterface->num_altsetting); - dbg("num endpoints: %d", usbinterface->cur_altsetting->desc.bNumEndpoints); - dbg("interface class: %d", usbinterface->cur_altsetting->desc.bInterfaceClass); - dbg("endpoint: attribute:0x%x type:0x%x", endpoint->bmAttributes, endpoint->bDescriptorType); + dev_dbg(&usbinterface->dev, "gtco # interfaces: %d\n", usbinterface->num_altsetting); + dev_dbg(&usbinterface->dev, "num endpoints: %d\n", usbinterface->cur_altsetting->desc.bNumEndpoints); + dev_dbg(&usbinterface->dev, "interface class: %d\n", usbinterface->cur_altsetting->desc.bInterfaceClass); + dev_dbg(&usbinterface->dev, "endpoint: attribute:0x%x type:0x%x\n", endpoint->bmAttributes, endpoint->bDescriptorType); if (usb_endpoint_xfer_int(endpoint)) - dbg("endpoint: we have interrupt endpoint\n"); + dev_dbg(&usbinterface->dev, "endpoint: we have interrupt endpoint\n"); - dbg("endpoint extra len:%d ", usbinterface->altsetting[0].extralen); + dev_dbg(&usbinterface->dev, "endpoint extra len:%d\n", usbinterface->altsetting[0].extralen); /* * Find the HID descriptor so we can find out the size of the @@ -893,8 +895,9 @@ static int gtco_probe(struct usb_interface *usbinterface, goto err_free_urb; } - dbg("Extra descriptor success: type:%d len:%d", - hid_desc->bDescriptorType, hid_desc->wDescriptorLength); + dev_dbg(&usbinterface->dev, + "Extra descriptor success: type:%d len:%d\n", + hid_desc->bDescriptorType, hid_desc->wDescriptorLength); report = kzalloc(le16_to_cpu(hid_desc->wDescriptorLength), GFP_KERNEL); if (!report) { @@ -915,7 +918,7 @@ static int gtco_probe(struct usb_interface *usbinterface, le16_to_cpu(hid_desc->wDescriptorLength), 5000); /* 5 secs */ - dbg("usb_control_msg result: %d", result); + dev_dbg(&usbinterface->dev, "usb_control_msg result: %d\n", result); if (result == le16_to_cpu(hid_desc->wDescriptorLength)) { parse_hid_report_descriptor(gtco, report, result); break; -- cgit v0.10.2 From 6d0f7dcba6ea0d04fb0d1374188c2479abf7f951 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:20 -0700 Subject: USB: kbtab.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c index be717d7..a39d176 100644 --- a/drivers/input/tablet/kbtab.c +++ b/drivers/input/tablet/kbtab.c @@ -53,10 +53,12 @@ static void kbtab_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, urb->status); + dev_dbg(&dev->dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, urb->status); + dev_dbg(&dev->dev, "%s - nonzero urb status received: %d\n", + __func__, urb->status); goto exit; } -- cgit v0.10.2 From b741ab9da614b08da51cffa961435bc81314f3c4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:23 -0700 Subject: USB: usbtouchscreen.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov CC: Henrik Rydberg CC: Rusty Russell CC: Viresh Kumar CC: Armando Visconti Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 4127cf7..100eded 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -269,8 +269,9 @@ static int e2i_init(struct usbtouch_usb *usbtouch) 0x01, 0x02, 0x0000, 0x0081, NULL, 0, USB_CTRL_SET_TIMEOUT); - dbg("%s - usb_control_msg - E2I_RESET - bytes|err: %d", - __func__, ret); + dev_dbg(&usbtouch->input->dev, + "%s - usb_control_msg - E2I_RESET - bytes|err: %d\n", + __func__, ret); return ret; } @@ -425,8 +426,9 @@ static int mtouch_init(struct usbtouch_usb *usbtouch) MTOUCHUSB_RESET, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d", - __func__, ret); + dev_dbg(&usbtouch->input->dev, + "%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d\n", + __func__, ret); if (ret < 0) return ret; msleep(150); @@ -436,8 +438,9 @@ static int mtouch_init(struct usbtouch_usb *usbtouch) MTOUCHUSB_ASYNC_REPORT, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT); - dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d", - __func__, ret); + dev_dbg(&usbtouch->input->dev, + "%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d\n", + __func__, ret); if (ret >= 0) break; if (ret != -EPIPE) @@ -737,27 +740,29 @@ static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt) #ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { + struct input_dev *input = dev->input; + switch (pkt[0]) { case 0x3A: /* command response */ - dbg("%s: Command response %d", __func__, pkt[1]); + dev_dbg(&input->dev, "%s: Command response %d\n", __func__, pkt[1]); break; case 0xC0: /* down */ dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); dev->touch = 1; - dbg("%s: down %d,%d", __func__, dev->x, dev->y); + dev_dbg(&input->dev, "%s: down %d,%d\n", __func__, dev->x, dev->y); return 1; case 0x80: /* up */ dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); dev->touch = 0; - dbg("%s: up %d,%d", __func__, dev->x, dev->y); + dev_dbg(&input->dev, "%s: up %d,%d\n", __func__, dev->x, dev->y); return 1; default: - dbg("%s: Unknown return %d", __func__, pkt[0]); + dev_dbg(&input->dev, "%s: Unknown return %d\n", __func__, pkt[0]); break; } @@ -812,7 +817,8 @@ static int nexio_alloc(struct usbtouch_usb *usbtouch) priv->ack = usb_alloc_urb(0, GFP_KERNEL); if (!priv->ack) { - dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__); + dev_dbg(&usbtouch->input->dev, + "%s - usb_alloc_urb failed: usbtouch->ack\n", __func__); goto err_ack_buf; } @@ -1349,6 +1355,7 @@ out_flush_buf: static void usbtouch_irq(struct urb *urb) { struct usbtouch_usb *usbtouch = urb->context; + struct device *dev = &usbtouch->input->dev; int retval; switch (urb->status) { @@ -1357,20 +1364,21 @@ static void usbtouch_irq(struct urb *urb) break; case -ETIME: /* this urb is timing out */ - dbg("%s - urb timed out - was the device unplugged?", - __func__); + dev_dbg(dev, + "%s - urb timed out - was the device unplugged?\n", + __func__); return; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: case -EPIPE: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, urb->status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); return; default: - dbg("%s - nonzero urb status received: %d", - __func__, urb->status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", + __func__, urb->status); goto exit; } @@ -1457,8 +1465,9 @@ static int usbtouch_reset_resume(struct usb_interface *intf) if (usbtouch->type->init) { err = usbtouch->type->init(usbtouch); if (err) { - dbg("%s - type->init() failed, err: %d", - __func__, err); + dev_dbg(&input->dev, + "%s - type->init() failed, err: %d\n", + __func__, err); return err; } } @@ -1533,7 +1542,8 @@ static int usbtouch_probe(struct usb_interface *intf, usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL); if (!usbtouch->irq) { - dbg("%s - usb_alloc_urb failed: usbtouch->irq", __func__); + dev_dbg(&intf->dev, + "%s - usb_alloc_urb failed: usbtouch->irq\n", __func__); goto out_free_buffers; } @@ -1595,7 +1605,9 @@ static int usbtouch_probe(struct usb_interface *intf, if (type->alloc) { err = type->alloc(usbtouch); if (err) { - dbg("%s - type->alloc() failed, err: %d", __func__, err); + dev_dbg(&intf->dev, + "%s - type->alloc() failed, err: %d\n", + __func__, err); goto out_free_urb; } } @@ -1604,14 +1616,18 @@ static int usbtouch_probe(struct usb_interface *intf, if (type->init) { err = type->init(usbtouch); if (err) { - dbg("%s - type->init() failed, err: %d", __func__, err); + dev_dbg(&intf->dev, + "%s - type->init() failed, err: %d\n", + __func__, err); goto out_do_exit; } } err = input_register_device(usbtouch->input); if (err) { - dbg("%s - input_register_device failed, err: %d", __func__, err); + dev_dbg(&intf->dev, + "%s - input_register_device failed, err: %d\n", + __func__, err); goto out_do_exit; } @@ -1652,12 +1668,12 @@ static void usbtouch_disconnect(struct usb_interface *intf) { struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); - dbg("%s - called", __func__); - if (!usbtouch) return; - dbg("%s - usbtouch is initialized, cleaning up", __func__); + dev_dbg(&usbtouch->input->dev, + "%s - usbtouch is initialized, cleaning up\n", __func__); + usb_set_intfdata(intf, NULL); /* this will stop IO via close */ input_unregister_device(usbtouch->input); -- cgit v0.10.2 From 77c9e125b3c88372852ce6dac068387c3048a058 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:24 -0700 Subject: USB: cxacru.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Simon Arlott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 98b89fe..b7eb86a 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -674,7 +674,7 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm, } ret = offd; - dbg("cm %#x", cm); + usb_dbg(instance->usbatm, "cm %#x\n", cm); fail: mutex_unlock(&instance->cm_serialize); err: @@ -733,7 +733,7 @@ static int cxacru_card_status(struct cxacru_data *instance) { int ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0); if (ret < 0) { /* firmware not loaded */ - dbg("cxacru_adsl_start: CARD_GET_STATUS returned %d", ret); + usb_dbg(instance->usbatm, "cxacru_adsl_start: CARD_GET_STATUS returned %d\n", ret); return ret; } return 0; @@ -758,7 +758,7 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance, int ret; int start_polling = 1; - dbg("cxacru_atm_start"); + dev_dbg(&intf->dev, "%s\n", __func__); /* Read MAC address */ ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_MAC_ADDRESS, NULL, 0, @@ -962,13 +962,13 @@ static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw, ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD), buf, offb, NULL, CMD_TIMEOUT); if (ret < 0) { - dbg("sending fw %#x failed", fw); + dev_dbg(&usb_dev->dev, "sending fw %#x failed\n", fw); goto cleanup; } offb = 0; } } while (offd < size); - dbg("sent fw %#x", fw); + dev_dbg(&usb_dev->dev, "sent fw %#x\n", fw); ret = 0; @@ -988,7 +988,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, usb_dev->descriptor.idProduct }; __le32 val; - dbg("cxacru_upload_firmware"); + usb_dbg(usbatm, "%s\n", __func__); /* FirmwarePllFClkValue */ val = cpu_to_le32(instance->modem_type->pll_f_clk); @@ -1074,7 +1074,7 @@ static int cxacru_find_firmware(struct cxacru_data *instance, char buf[16]; sprintf(buf, "cxacru-%s.bin", phase); - dbg("cxacru_find_firmware: looking for %s", buf); + usb_dbg(usbatm, "cxacru_find_firmware: looking for %s\n", buf); if (request_firmware(fw_p, buf, dev)) { usb_dbg(usbatm, "no stage %s firmware found\n", phase); @@ -1115,9 +1115,9 @@ static int cxacru_heavy_init(struct usbatm_data *usbatm_instance, ret = cxacru_card_status(instance); if (ret) - dbg("modem initialisation failed"); + usb_dbg(usbatm_instance, "modem initialisation failed\n"); else - dbg("done setting up the modem"); + usb_dbg(usbatm_instance, "done setting up the modem\n"); return ret; } @@ -1133,7 +1133,7 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance, /* instance init */ instance = kzalloc(sizeof(*instance), GFP_KERNEL); if (!instance) { - dbg("cxacru_bind: no memory for instance data"); + usb_dbg(usbatm_instance, "cxacru_bind: no memory for instance data\n"); return -ENOMEM; } @@ -1149,31 +1149,31 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance, instance->rcv_buf = (u8 *) __get_free_page(GFP_KERNEL); if (!instance->rcv_buf) { - dbg("cxacru_bind: no memory for rcv_buf"); + usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_buf\n"); ret = -ENOMEM; goto fail; } instance->snd_buf = (u8 *) __get_free_page(GFP_KERNEL); if (!instance->snd_buf) { - dbg("cxacru_bind: no memory for snd_buf"); + usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_buf\n"); ret = -ENOMEM; goto fail; } instance->rcv_urb = usb_alloc_urb(0, GFP_KERNEL); if (!instance->rcv_urb) { - dbg("cxacru_bind: no memory for rcv_urb"); + usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_urb\n"); ret = -ENOMEM; goto fail; } instance->snd_urb = usb_alloc_urb(0, GFP_KERNEL); if (!instance->snd_urb) { - dbg("cxacru_bind: no memory for snd_urb"); + usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_urb\n"); ret = -ENOMEM; goto fail; } if (!cmd_ep) { - dbg("cxacru_bind: no command endpoint"); + usb_dbg(usbatm_instance, "cxacru_bind: no command endpoint\n"); ret = -ENODEV; goto fail; } @@ -1227,10 +1227,10 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance, struct cxacru_data *instance = usbatm_instance->driver_data; int is_polling = 1; - dbg("cxacru_unbind entered"); + usb_dbg(usbatm_instance, "cxacru_unbind entered\n"); if (!instance) { - dbg("cxacru_unbind: NULL instance!"); + usb_dbg(usbatm_instance, "cxacru_unbind: NULL instance!\n"); return; } -- cgit v0.10.2 From d8995425ff915d318b1cb63adbf856e6e4e1340e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:25 -0700 Subject: USB: speedtch.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Duncan Sands Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 98dd9e4..975e9c6 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -170,7 +170,7 @@ static void speedtch_set_swbuff(struct speedtch_instance_data *instance, int sta "%sabling SW buffering: usb_control_msg returned %d\n", state ? "En" : "Dis", ret); else - dbg("speedtch_set_swbuff: %sbled SW buffering", state ? "En" : "Dis"); + usb_dbg(usbatm, "speedtch_set_swbuff: %sbled SW buffering\n", state ? "En" : "Dis"); } static void speedtch_test_sequence(struct speedtch_instance_data *instance) -- cgit v0.10.2 From 4c2a47a287876c098b41e4244426deca68762afe Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:26 -0700 Subject: USB: usbatm.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Duncan Sands Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index d3448ca..ee62b35 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -86,7 +86,7 @@ #ifdef VERBOSE_DEBUG static int usbatm_print_packet(const unsigned char *data, int len); #define PACKETDEBUG(arg...) usbatm_print_packet(arg) -#define vdbg(arg...) dbg(arg) +#define vdbg(arg...) dev_dbg(arg) #else #define PACKETDEBUG(arg...) #define vdbg(arg...) @@ -714,7 +714,7 @@ static void usbatm_destroy_instance(struct kref *kref) { struct usbatm_data *instance = container_of(kref, struct usbatm_data, refcount); - dbg("%s", __func__); + usb_dbg(instance, "%s\n", __func__); tasklet_kill(&instance->rx_channel.tasklet); tasklet_kill(&instance->tx_channel.tasklet); @@ -724,14 +724,14 @@ static void usbatm_destroy_instance(struct kref *kref) static void usbatm_get_instance(struct usbatm_data *instance) { - dbg("%s", __func__); + usb_dbg(instance, "%s\n", __func__); kref_get(&instance->refcount); } static void usbatm_put_instance(struct usbatm_data *instance) { - dbg("%s", __func__); + usb_dbg(instance, "%s\n", __func__); kref_put(&instance->refcount, usbatm_destroy_instance); } @@ -745,11 +745,10 @@ static void usbatm_atm_dev_close(struct atm_dev *atm_dev) { struct usbatm_data *instance = atm_dev->dev_data; - dbg("%s", __func__); - if (!instance) return; + usb_dbg(instance, "%s\n", __func__); atm_dev->dev_data = NULL; /* catch bugs */ usbatm_put_instance(instance); /* taken in usbatm_atm_init */ } @@ -759,10 +758,8 @@ static int usbatm_atm_proc_read(struct atm_dev *atm_dev, loff_t * pos, char *pag struct usbatm_data *instance = atm_dev->dev_data; int left = *pos; - if (!instance) { - dbg("%s: NULL instance!", __func__); + if (!instance) return -ENODEV; - } if (!left--) return sprintf(page, "%s\n", instance->description); @@ -804,10 +801,8 @@ static int usbatm_atm_open(struct atm_vcc *vcc) int vci = vcc->vci; short vpi = vcc->vpi; - if (!instance) { - dbg("%s: NULL data!", __func__); + if (!instance) return -ENODEV; - } atm_dbg(instance, "%s: vpi %hd, vci %d\n", __func__, vpi, vci); @@ -884,10 +879,8 @@ static void usbatm_atm_close(struct atm_vcc *vcc) struct usbatm_data *instance = vcc->dev->dev_data; struct usbatm_vcc_data *vcc_data = vcc->dev_data; - if (!instance || !vcc_data) { - dbg("%s: NULL data!", __func__); + if (!instance || !vcc_data) return; - } atm_dbg(instance, "%s entered\n", __func__); @@ -929,10 +922,8 @@ static int usbatm_atm_ioctl(struct atm_dev *atm_dev, unsigned int cmd, { struct usbatm_data *instance = atm_dev->dev_data; - if (!instance || instance->disconnected) { - dbg("%s: %s!", __func__, instance ? "disconnected" : "NULL instance"); + if (!instance || instance->disconnected) return -ENODEV; - } switch (cmd) { case ATM_QUERYLOOP: @@ -1336,8 +1327,6 @@ EXPORT_SYMBOL_GPL(usbatm_usb_disconnect); static int __init usbatm_usb_init(void) { - dbg("%s: driver version %s", __func__, DRIVER_VERSION); - if (sizeof(struct usbatm_control) > FIELD_SIZEOF(struct sk_buff, cb)) { printk(KERN_ERR "%s unusable with this kernel!\n", usbatm_driver_name); return -EIO; @@ -1357,7 +1346,6 @@ module_init(usbatm_usb_init); static void __exit usbatm_usb_exit(void) { - dbg("%s", __func__); } module_exit(usbatm_usb_exit); -- cgit v0.10.2 From 4ed48e5e8b308299bfc4bbad6bb008743f40fa5c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:30 -0700 Subject: USB: xusbatm.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c index 48ee0c5..14ec9f0 100644 --- a/drivers/usb/atm/xusbatm.c +++ b/drivers/usb/atm/xusbatm.c @@ -187,8 +187,6 @@ static int __init xusbatm_init(void) { int i; - dbg("xusbatm_init"); - if (!num_vendor || num_vendor != num_product || num_vendor != num_rx_endpoint || @@ -221,8 +219,6 @@ module_init(xusbatm_init); static void __exit xusbatm_exit(void) { - dbg("xusbatm_exit entered"); - usb_deregister(&xusbatm_usb_driver); } module_exit(xusbatm_exit); -- cgit v0.10.2 From 4f306309fc07075a70f0731805c7db2f075ebcab Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:31 -0700 Subject: USB: usblp.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index a68c1a6..d4c47d5 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -172,27 +172,31 @@ struct usblp { #ifdef DEBUG static void usblp_dump(struct usblp *usblp) { + struct device *dev = &usblp->intf->dev; int p; - dbg("usblp=0x%p", usblp); - dbg("dev=0x%p", usblp->dev); - dbg("present=%d", usblp->present); - dbg("readbuf=0x%p", usblp->readbuf); - dbg("readcount=%d", usblp->readcount); - dbg("ifnum=%d", usblp->ifnum); - for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) { - dbg("protocol[%d].alt_setting=%d", p, usblp->protocol[p].alt_setting); - dbg("protocol[%d].epwrite=%p", p, usblp->protocol[p].epwrite); - dbg("protocol[%d].epread=%p", p, usblp->protocol[p].epread); - } - dbg("current_protocol=%d", usblp->current_protocol); - dbg("minor=%d", usblp->minor); - dbg("wstatus=%d", usblp->wstatus); - dbg("rstatus=%d", usblp->rstatus); - dbg("quirks=%d", usblp->quirks); - dbg("used=%d", usblp->used); - dbg("bidir=%d", usblp->bidir); - dbg("device_id_string=\"%s\"", + dev_dbg(dev, "usblp=0x%p\n", usblp); + dev_dbg(dev, "dev=0x%p\n", usblp->dev); + dev_dbg(dev, "present=%d\n", usblp->present); + dev_dbg(dev, "readbuf=0x%p\n", usblp->readbuf); + dev_dbg(dev, "readcount=%d\n", usblp->readcount); + dev_dbg(dev, "ifnum=%d\n", usblp->ifnum); + for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) { + dev_dbg(dev, "protocol[%d].alt_setting=%d\n", p, + usblp->protocol[p].alt_setting); + dev_dbg(dev, "protocol[%d].epwrite=%p\n", p, + usblp->protocol[p].epwrite); + dev_dbg(dev, "protocol[%d].epread=%p\n", p, + usblp->protocol[p].epread); + } + dev_dbg(dev, "current_protocol=%d\n", usblp->current_protocol); + dev_dbg(dev, "minor=%d\n", usblp->minor); + dev_dbg(dev, "wstatus=%d\n", usblp->wstatus); + dev_dbg(dev, "rstatus=%d\n", usblp->rstatus); + dev_dbg(dev, "quirks=%d\n", usblp->quirks); + dev_dbg(dev, "used=%d\n", usblp->used); + dev_dbg(dev, "bidir=%d\n", usblp->bidir); + dev_dbg(dev, "device_id_string=\"%s\"\n", usblp->device_id_string ? usblp->device_id_string + 2 : (unsigned char *)"(null)"); @@ -262,7 +266,8 @@ static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, i retval = usb_control_msg(usblp->dev, dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0), request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT); - dbg("usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d", + dev_dbg(&usblp->intf->dev, + "usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d\n", request, !!dir, recip, value, index, len, retval); return retval < 0 ? retval : 0; } @@ -500,8 +505,9 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) goto done; } - dbg("usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)", cmd, _IOC_TYPE(cmd), - _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd)); + dev_dbg(&usblp->intf->dev, + "usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)\n", cmd, + _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd)); if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */ @@ -594,7 +600,8 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) goto done; } - dbg("usblp%d requested/got HP channel %ld/%d", + dev_dbg(&usblp->intf->dev, + "usblp%d requested/got HP channel %ld/%d\n", usblp->minor, arg, newChannel); break; @@ -614,7 +621,8 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) goto done; } - dbg("usblp%d is bus=%d, device=%d", + dev_dbg(&usblp->intf->dev, + "usblp%d is bus=%d, device=%d\n", usblp->minor, twoints[0], twoints[1]); break; @@ -634,7 +642,8 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) goto done; } - dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X", + dev_dbg(&usblp->intf->dev, + "usblp%d is VID=0x%4.4X, PID=0x%4.4X\n", usblp->minor, twoints[0], twoints[1]); break; @@ -987,7 +996,7 @@ static int usblp_submit_read(struct usblp *usblp) usblp->rcomplete = 0; spin_unlock_irqrestore(&usblp->lock, flags); if ((rc = usb_submit_urb(urb, GFP_KERNEL)) < 0) { - dbg("error submitting urb (%d)", rc); + dev_dbg(&usblp->intf->dev, "error submitting urb (%d)\n", rc); spin_lock_irqsave(&usblp->lock, flags); usblp->rstatus = rc; usblp->rcomplete = 1; @@ -1129,7 +1138,8 @@ static int usblp_probe(struct usb_interface *intf, /* Analyze and pick initial alternate settings and endpoints. */ protocol = usblp_select_alts(usblp); if (protocol < 0) { - dbg("incompatible printer-class device 0x%4.4X/0x%4.4X", + dev_dbg(&intf->dev, + "incompatible printer-class device 0x%4.4X/0x%4.4X\n", le16_to_cpu(dev->descriptor.idVendor), le16_to_cpu(dev->descriptor.idProduct)); retval = -ENODEV; @@ -1158,14 +1168,14 @@ static int usblp_probe(struct usb_interface *intf, retval = usb_register_dev(intf, &usblp_class); if (retval) { - printk(KERN_ERR "usblp: Not able to get a minor" - " (base %u, slice default): %d\n", - USBLP_MINOR_BASE, retval); + dev_err(&intf->dev, + "usblp: Not able to get a minor (base %u, slice default): %d\n", + USBLP_MINOR_BASE, retval); goto abort_intfdata; } usblp->minor = intf->minor; - printk(KERN_INFO "usblp%d: USB %sdirectional printer dev %d " - "if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n", + dev_info(&intf->dev, + "usblp%d: USB %sdirectional printer dev %d if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n", usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum, usblp->ifnum, usblp->protocol[usblp->current_protocol].alt_setting, @@ -1302,7 +1312,8 @@ static int usblp_set_protocol(struct usblp *usblp, int protocol) usblp->bidir = (usblp->protocol[protocol].epread != NULL); usblp->current_protocol = protocol; - dbg("usblp%d set protocol %d", usblp->minor, protocol); + dev_dbg(&usblp->intf->dev, "usblp%d set protocol %d\n", + usblp->minor, protocol); return 0; } @@ -1315,7 +1326,8 @@ static int usblp_cache_device_id_string(struct usblp *usblp) err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1); if (err < 0) { - dbg("usblp%d: error = %d reading IEEE-1284 Device ID string", + dev_dbg(&usblp->intf->dev, + "usblp%d: error = %d reading IEEE-1284 Device ID string\n", usblp->minor, err); usblp->device_id_string[0] = usblp->device_id_string[1] = '\0'; return -EIO; @@ -1331,7 +1343,7 @@ static int usblp_cache_device_id_string(struct usblp *usblp) length = USBLP_DEVICE_ID_SIZE - 1; usblp->device_id_string[length] = '\0'; - dbg("usblp%d Device ID string [len=%d]=\"%s\"", + dev_dbg(&usblp->intf->dev, "usblp%d Device ID string [len=%d]=\"%s\"\n", usblp->minor, length, &usblp->device_id_string[2]); return length; -- cgit v0.10.2 From 079d440e103da3ef39b2c8451b66780aa41fd34d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:35 -0700 Subject: USB: file.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Al Viro Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index d95760d..e673b26 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -183,7 +183,7 @@ int usb_register_dev(struct usb_interface *intf, if (retval) return retval; - dev_dbg(&intf->dev, "looking for a minor, starting at %d", minor_base); + dev_dbg(&intf->dev, "looking for a minor, starting at %d\n", minor_base); down_write(&minor_rwsem); for (minor = minor_base; minor < MAX_USB_MINORS; ++minor) { @@ -239,7 +239,7 @@ void usb_deregister_dev(struct usb_interface *intf, if (intf->minor == -1) return; - dbg ("removing %d minor", intf->minor); + dev_dbg(&intf->dev, "removing %d minor\n", intf->minor); down_write(&minor_rwsem); usb_minors[intf->minor] = NULL; -- cgit v0.10.2 From 82491c2a204494494016c6cd7b6f1bee7c3dfb77 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:35 -0700 Subject: USB: ehci-q.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 13f4f98..4378bf7 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -943,7 +943,8 @@ qh_make ( } break; default: - dbg ("bogus dev %p speed %d", urb->dev, urb->dev->speed); + ehci_dbg(ehci, "bogus dev %p speed %d\n", urb->dev, + urb->dev->speed); done: qh_put (qh); return NULL; -- cgit v0.10.2 From 2d0fe1bbabbab34ef655bce21cb14814eda5916a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:36 -0700 Subject: USB: ehci-sched.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index ffe8fc3..cb76679 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -2356,7 +2356,8 @@ restart: * in the previous frame for completions. */ if (q.fstn->hw_prev != EHCI_LIST_END(ehci)) { - dbg ("ignoring completions from FSTNs"); + ehci_dbg(ehci, + "ignoring completions from FSTNs\n"); } type = Q_NEXT_TYPE(ehci, q.fstn->hw_next); q = q.fstn->fstn_next; @@ -2439,7 +2440,7 @@ restart: q = *q_p; break; default: - dbg ("corrupt type %d frame %d shadow %p", + ehci_dbg(ehci, "corrupt type %d frame %d shadow %p\n", type, frame, q.ptr); // BUG (); q.ptr = NULL; -- cgit v0.10.2 From b8a6f71d7e3391d435535990cf5b5a86662115ef Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:37 -0700 Subject: USB: ohci-dbg.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index e4bcb62..31b81f9 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -29,14 +29,14 @@ urb_print(struct urb * urb, char * str, int small, int status) unsigned int pipe= urb->pipe; if (!urb->dev || !urb->dev->bus) { - dbg("%s URB: no dev", str); + printk(KERN_DEBUG "%s URB: no dev\n", str); return; } #ifndef OHCI_VERBOSE_DEBUG if (status != 0) #endif - dbg("%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d stat=%d", + printk(KERN_DEBUG "%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d stat=%d\n", str, urb, usb_pipedevice (pipe), -- cgit v0.10.2 From 1f550c1a2f8ef2a1b035b0c71cd258c1f6c3602d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:38 -0700 Subject: USB: ohci-ep93xx.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alan Stern CC: Lennert Buytenhek Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index cb108b3..dbfbd1d 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -47,7 +47,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver, struct usb_hcd *hcd; if (pdev->resource[1].flags != IORESOURCE_IRQ) { - dbg("resource[1] is not IORESOURCE_IRQ"); + dev_dbg(&pdev->dev, "resource[1] is not IORESOURCE_IRQ\n"); return -ENOMEM; } @@ -65,14 +65,14 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver, hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); if (hcd->regs == NULL) { - dbg("ioremap failed"); + dev_dbg(&pdev->dev, "ioremap failed\n"); retval = -ENOMEM; goto err2; } usb_host_clock = clk_get(&pdev->dev, NULL); if (IS_ERR(usb_host_clock)) { - dbg("clk_get failed"); + dev_dbg(&pdev->dev, "clk_get failed\n"); retval = PTR_ERR(usb_host_clock); goto err3; } -- cgit v0.10.2 From 3879e3049fd0f4e6de823ea531ecaf268ad607c7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:39 -0700 Subject: USB: ohci-sa1111.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index e1004fb..b6cc925 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -46,7 +46,7 @@ static void dump_hci_status(struct usb_hcd *hcd, const char *label) { unsigned long status = sa1111_readl(hcd->regs + USB_STATUS); - dbg("%s USB_STATUS = { %s%s%s%s%s}", label, + printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label, ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""), ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""), ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "), @@ -193,7 +193,7 @@ static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev) hcd->rsrc_len = resource_size(&dev->res); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dbg("request_mem_region failed"); + dev_dbg(&dev->dev, "request_mem_region failed\n"); ret = -EBUSY; goto err1; } -- cgit v0.10.2 From b5f5bfe05625ab4ebc27616cdf06d81623a37617 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:43 -0700 Subject: USB: oxu210hp-hcd.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Rusty Russell CC: David Howells CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 77a5225..4f0f033 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -1399,8 +1399,8 @@ static struct ehci_qh *qh_make(struct oxu_hcd *oxu, * But interval 1 scheduling is simpler, and * includes high bandwidth. */ - dbg("intr period %d uframes, NYET!", - urb->interval); + oxu_dbg(oxu, "intr period %d uframes, NYET!\n", + urb->interval); goto done; } } else { @@ -1471,7 +1471,7 @@ static struct ehci_qh *qh_make(struct oxu_hcd *oxu, } break; default: - dbg("bogus dev %p speed %d", urb->dev, urb->dev->speed); + oxu_dbg(oxu, "bogus dev %p speed %d\n", urb->dev, urb->dev->speed); done: qh_put(qh); return NULL; @@ -2307,7 +2307,7 @@ restart: qh_put(temp.qh); break; default: - dbg("corrupt type %d frame %d shadow %p", + oxu_dbg(oxu, "corrupt type %d frame %d shadow %p\n", type, frame, q.ptr); q.ptr = NULL; } -- cgit v0.10.2 From 167e4925e91119ea9ede429b87aab214fa5dc184 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:46 -0700 Subject: USB: r8a66597-hcd.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Yoshihiro Shimoda CC: Kuninori Morimoto CC: Tobias Klauser CC: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 2bf1320..c868be6 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -401,7 +401,7 @@ static u8 alloc_usb_address(struct r8a66597 *r8a66597, struct urb *urb) if (r8a66597->address_map & (1 << addr)) continue; - dbg("alloc_address: r8a66597_addr=%d", addr); + dev_dbg(&urb->dev->dev, "alloc_address: r8a66597_addr=%d\n", addr); r8a66597->address_map |= 1 << addr; if (make_r8a66597_device(r8a66597, urb, addr) < 0) @@ -426,7 +426,7 @@ static void free_usb_address(struct r8a66597 *r8a66597, if (!dev) return; - dbg("free_addr: addr=%d", dev->address); + dev_dbg(&dev->udev->dev, "free_addr: addr=%d\n", dev->address); dev->state = USB_STATE_DEFAULT; r8a66597->address_map &= ~(1 << dev->address); @@ -819,7 +819,7 @@ static void enable_r8a66597_pipe(struct r8a66597 *r8a66597, struct urb *urb, struct r8a66597_device *dev = get_urb_to_r8a66597_dev(r8a66597, urb); struct r8a66597_pipe *pipe = hep->hcpriv; - dbg("enable_pipe:"); + dev_dbg(&dev->udev->dev, "enable_pipe:\n"); pipe->info = *info; set_pipe_reg_addr(pipe, R8A66597_PIPE_NO_DMA); @@ -898,7 +898,7 @@ static void disable_r8a66597_pipe_all(struct r8a66597 *r8a66597, force_dequeue(r8a66597, pipenum, dev->address); } - dbg("disable_pipe"); + dev_dbg(&dev->udev->dev, "disable_pipe\n"); r8a66597->dma_map &= ~(dev->dma_map); dev->dma_map = 0; @@ -2264,7 +2264,7 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd) struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd); int port; - dbg("%s", __func__); + dev_dbg(&r8a66597->device0.udev->dev, "%s\n", __func__); for (port = 0; port < r8a66597->max_root_hub; port++) { struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; @@ -2273,7 +2273,7 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd) if (!(rh->port & USB_PORT_STAT_ENABLE)) continue; - dbg("suspend port = %d", port); + dev_dbg(&rh->dev->udev->dev, "suspend port = %d\n", port); r8a66597_bclr(r8a66597, UACT, dvstctr_reg); /* suspend */ rh->port |= USB_PORT_STAT_SUSPEND; @@ -2295,7 +2295,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd) struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd); int port; - dbg("%s", __func__); + dev_dbg(&r8a66597->device0.udev->dev, "%s\n", __func__); for (port = 0; port < r8a66597->max_root_hub; port++) { struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; @@ -2304,7 +2304,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd) if (!(rh->port & USB_PORT_STAT_SUSPEND)) continue; - dbg("resume port = %d", port); + dev_dbg(&rh->dev->udev->dev, "resume port = %d\n", port); rh->port &= ~USB_PORT_STAT_SUSPEND; rh->port |= USB_PORT_STAT_C_SUSPEND << 16; r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg); @@ -2360,7 +2360,7 @@ static int r8a66597_suspend(struct device *dev) struct r8a66597 *r8a66597 = dev_get_drvdata(dev); int port; - dbg("%s", __func__); + dev_dbg(dev, "%s\n", __func__); disable_controller(r8a66597); @@ -2378,7 +2378,7 @@ static int r8a66597_resume(struct device *dev) struct r8a66597 *r8a66597 = dev_get_drvdata(dev); struct usb_hcd *hcd = r8a66597_to_hcd(r8a66597); - dbg("%s", __func__); + dev_dbg(dev, "%s\n", __func__); enable_controller(r8a66597); usb_root_hub_lost_power(hcd->self.root_hub); -- cgit v0.10.2 From 1b6d8232586e4c144f5e90ab9606884dcf62c18f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:50 -0700 Subject: USB: mdc800.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index 575b56c..7121b50 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -284,18 +284,16 @@ static void mdc800_usb_irq (struct urb *urb) int data_received=0, wake_up; unsigned char* b=urb->transfer_buffer; struct mdc800_data* mdc800=urb->context; + struct device *dev = &mdc800->dev->dev; int status = urb->status; if (status >= 0) { - - //dbg ("%i %i %i %i %i %i %i %i \n",b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7]); - if (mdc800_isBusy (b)) { if (!mdc800->camera_busy) { mdc800->camera_busy=1; - dbg ("gets busy"); + dev_dbg(dev, "gets busy\n"); } } else @@ -303,13 +301,13 @@ static void mdc800_usb_irq (struct urb *urb) if (mdc800->camera_busy && mdc800_isReady (b)) { mdc800->camera_busy=0; - dbg ("gets ready"); + dev_dbg(dev, "gets ready\n"); } } if (!(mdc800_isBusy (b) || mdc800_isReady (b))) { /* Store Data in camera_answer field */ - dbg ("%i %i %i %i %i %i %i %i ",b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7]); + dev_dbg(dev, "%i %i %i %i %i %i %i %i \n",b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7]); memcpy (mdc800->camera_response,b,8); data_received=1; @@ -441,7 +439,7 @@ static int mdc800_usb_probe (struct usb_interface *intf, int irq_interval=0; int retval; - dbg ("(mdc800_usb_probe) called."); + dev_dbg(&intf->dev, "(%s) called.\n", __func__); if (mdc800->dev != NULL) @@ -554,7 +552,7 @@ static void mdc800_usb_disconnect (struct usb_interface *intf) { struct mdc800_data* mdc800 = usb_get_intfdata(intf); - dbg ("(mdc800_usb_disconnect) called"); + dev_dbg(&intf->dev, "(%s) called\n", __func__); if (mdc800) { if (mdc800->state == NOT_CONNECTED) @@ -656,7 +654,7 @@ static int mdc800_device_open (struct inode* inode, struct file *file) } mdc800->open=1; - dbg ("Mustek MDC800 device opened."); + dev_dbg(&mdc800->dev->dev, "Mustek MDC800 device opened.\n"); error_out: mutex_unlock(&mdc800->io_lock); @@ -670,7 +668,6 @@ error_out: static int mdc800_device_release (struct inode* inode, struct file *file) { int retval=0; - dbg ("Mustek MDC800 device closed."); mutex_lock(&mdc800->io_lock); if (mdc800->open && (mdc800->state != NOT_CONNECTED)) @@ -927,7 +924,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s { mdc800->pic_len=(int) 65536*(unsigned char) mdc800->camera_response[0]+256*(unsigned char) mdc800->camera_response[1]+(unsigned char) mdc800->camera_response[2]; - dbg ("cached imagesize = %i",mdc800->pic_len); + dev_dbg(&mdc800->dev->dev, "cached imagesize = %i\n", mdc800->pic_len); } } -- cgit v0.10.2 From 0a3fd536e685e0ceb646de1a43821bd11c0be75c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:54 -0700 Subject: USB: appledisplay.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Andrew Morton CC: Eric Dumazet CC: Mike Frysinger CC: Arun Sharma Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index ac0d75a..0fc6e5f 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -88,6 +88,7 @@ static struct workqueue_struct *wq; static void appledisplay_complete(struct urb *urb) { struct appledisplay *pdata = urb->context; + struct device *dev = &pdata->udev->dev; unsigned long flags; int status = urb->status; int retval; @@ -97,18 +98,18 @@ static void appledisplay_complete(struct urb *urb) /* success */ break; case -EOVERFLOW: - printk(KERN_ERR "appletouch: OVERFLOW with data " - "length %d, actual length is %d\n", + dev_err(dev, + "OVERFLOW with data length %d, actual length is %d\n", ACD_URB_BUFFER_LEN, pdata->urb->actual_length); case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: /* This urb is terminated, clean up */ - dbg("%s - urb shuttingdown with status: %d", + dev_dbg(dev, "%s - urb shuttingdown with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", + dev_dbg(dev, "%s - nonzero urb status received: %d/n", __func__, status); goto exit; } @@ -132,8 +133,7 @@ static void appledisplay_complete(struct urb *urb) exit: retval = usb_submit_urb(pdata->urb, GFP_ATOMIC); if (retval) { - dev_err(&pdata->udev->dev, - "%s - usb_submit_urb failed with result %d\n", + dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } } -- cgit v0.10.2 From a341c6b29503d1326e7ada1dfa5515b53a5f6276 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:58 -0700 Subject: USB: idmouse.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Kuninori Morimoto CC: Sarah Sharp CC: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index c00fcd7..ce97838 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -200,7 +200,8 @@ reset: return -EAGAIN; /* should be IMGSIZE == 65040 */ - dbg("read %d bytes fingerprint data", bytes_read); + dev_dbg(&dev->interface->dev, "read %d bytes fingerprint data\n", + bytes_read); return result; } -- cgit v0.10.2 From e1a344d3ded6df7c1938e7f70b9f28c15358e7ba Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:33:59 -0700 Subject: USB: rio500.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Cesar Miquel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index cb55dc5..1084124 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -153,10 +153,10 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) requesttype = rio_cmd.requesttype | USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE; - dbg - ("sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x", - requesttype, rio_cmd.request, rio_cmd.value, - rio_cmd.index, rio_cmd.length); + dev_dbg(&rio->rio_dev->dev, + "sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n", + requesttype, rio_cmd.request, rio_cmd.value, + rio_cmd.index, rio_cmd.length); /* Send rio control message */ retries = 3; while (retries) { @@ -176,8 +176,9 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) result); retries = 0; } else { - dbg("Executed ioctl. Result = %d (data=%02x)", - result, buffer[0]); + dev_dbg(&rio->rio_dev->dev, + "Executed ioctl. Result = %d (data=%02x)\n", + result, buffer[0]); if (copy_to_user(rio_cmd.buffer, buffer, rio_cmd.length)) { free_page((unsigned long) buffer); @@ -223,9 +224,10 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) requesttype = rio_cmd.requesttype | USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; - dbg("sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x", - requesttype, rio_cmd.request, rio_cmd.value, - rio_cmd.index, rio_cmd.length); + dev_dbg(&rio->rio_dev->dev, + "sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n", + requesttype, rio_cmd.request, rio_cmd.value, + rio_cmd.index, rio_cmd.length); /* Send rio control message */ retries = 3; while (retries) { @@ -245,7 +247,8 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) result); retries = 0; } else { - dbg("Executed ioctl. Result = %d", result); + dev_dbg(&rio->rio_dev->dev, + "Executed ioctl. Result = %d\n", result); retries = 0; } @@ -317,8 +320,9 @@ write_rio(struct file *file, const char __user *buffer, usb_sndbulkpipe(rio->rio_dev, 2), obuf, thistime, &partial, 5000); - dbg("write stats: result:%d thistime:%lu partial:%u", - result, thistime, partial); + dev_dbg(&rio->rio_dev->dev, + "write stats: result:%d thistime:%lu partial:%u\n", + result, thistime, partial); if (result == -ETIMEDOUT) { /* NAK - so hold for a while */ if (!maxretry--) { @@ -398,8 +402,9 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) ibuf, this_read, &partial, 8000); - dbg("read stats: result:%d this_read:%u partial:%u", - result, this_read, partial); + dev_dbg(&rio->rio_dev->dev, + "read stats: result:%d this_read:%u partial:%u\n", + result, this_read, partial); if (partial) { count = this_read = partial; @@ -479,7 +484,7 @@ static int probe_rio(struct usb_interface *intf, usb_deregister_dev(intf, &usb_rio_class); return -ENOMEM; } - dbg("probe_rio: obuf address:%p", rio->obuf); + dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf); if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) { dev_err(&dev->dev, @@ -488,7 +493,7 @@ static int probe_rio(struct usb_interface *intf, kfree(rio->obuf); return -ENOMEM; } - dbg("probe_rio: ibuf address:%p", rio->ibuf); + dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf); mutex_init(&(rio->lock)); -- cgit v0.10.2 From d8ec7a7c1c2139ace5b8da79600bcef756e0b349 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:34:03 -0700 Subject: USB: usblcd.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Zack Parsons CC: Kuninori Morimoto CC: Sarah Sharp CC: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index c4ef9a1..89927bc 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -209,8 +209,8 @@ static void lcd_write_bulk_callback(struct urb *urb) !(status == -ENOENT || status == -ECONNRESET || status == -ESHUTDOWN)) { - dbg("USBLCD: %s - nonzero write bulk status received: %d", - __func__, status); + dev_dbg(&dev->interface->dev, + "nonzero write bulk status received: %d\n", status); } /* free up our allocated buffer */ -- cgit v0.10.2 From 7a2d281060fad7ef9220b8c051da38eae6c5f366 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:34:07 -0700 Subject: USB: uss720.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 7f64147..29cad9e 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -85,9 +85,9 @@ static void destroy_priv(struct kref *kref) { struct parport_uss720_private *priv = container_of(kref, struct parport_uss720_private, ref_count); + dev_dbg(&priv->usbdev->dev, "destroying priv datastructure\n"); usb_put_dev(priv->usbdev); kfree(priv); - dbg("destroying priv datastructure"); } static void destroy_async(struct kref *kref) @@ -123,10 +123,12 @@ static void async_complete(struct urb *urb) } else if (rq->dr.bRequest == 3) { memcpy(priv->reg, rq->reg, sizeof(priv->reg)); #if 0 - dbg("async_complete regs %02x %02x %02x %02x %02x %02x %02x", - (unsigned int)priv->reg[0], (unsigned int)priv->reg[1], (unsigned int)priv->reg[2], - (unsigned int)priv->reg[3], (unsigned int)priv->reg[4], (unsigned int)priv->reg[5], - (unsigned int)priv->reg[6]); + dev_dbg(&priv->usbdev->dev, + "async_complete regs %02x %02x %02x %02x %02x %02x %02x\n", + (unsigned int)priv->reg[0], (unsigned int)priv->reg[1], + (unsigned int)priv->reg[2], (unsigned int)priv->reg[3], + (unsigned int)priv->reg[4], (unsigned int)priv->reg[5], + (unsigned int)priv->reg[6]); #endif /* if nAck interrupts are enabled and we have an interrupt, call the interrupt procedure */ if (rq->reg[2] & rq->reg[1] & 0x10 && pp) @@ -693,9 +695,9 @@ static int uss720_probe(struct usb_interface *intf, unsigned char reg; int i; - dbg("probe: vendor id 0x%x, device id 0x%x\n", - le16_to_cpu(usbdev->descriptor.idVendor), - le16_to_cpu(usbdev->descriptor.idProduct)); + dev_dbg(&intf->dev, "probe: vendor id 0x%x, device id 0x%x\n", + le16_to_cpu(usbdev->descriptor.idVendor), + le16_to_cpu(usbdev->descriptor.idProduct)); /* our known interfaces have 3 alternate settings */ if (intf->num_altsetting != 3) { @@ -703,7 +705,7 @@ static int uss720_probe(struct usb_interface *intf, return -ENODEV; } i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2); - dbg("set inteface result %d", i); + dev_dbg(&intf->dev, "set inteface result %d\n", i); interface = intf->cur_altsetting; @@ -734,11 +736,13 @@ static int uss720_probe(struct usb_interface *intf, set_1284_register(pp, 2, 0x0c, GFP_KERNEL); /* debugging */ get_1284_register(pp, 0, ®, GFP_KERNEL); - dbg("reg: %02x %02x %02x %02x %02x %02x %02x", - priv->reg[0], priv->reg[1], priv->reg[2], priv->reg[3], priv->reg[4], priv->reg[5], priv->reg[6]); + dev_dbg(&intf->dev, "reg: %02x %02x %02x %02x %02x %02x %02x\n", + priv->reg[0], priv->reg[1], priv->reg[2], priv->reg[3], + priv->reg[4], priv->reg[5], priv->reg[6]); endpoint = &interface->endpoint[2]; - dbg("epaddr %d interval %d", endpoint->desc.bEndpointAddress, endpoint->desc.bInterval); + dev_dbg(&intf->dev, "epaddr %d interval %d\n", + endpoint->desc.bEndpointAddress, endpoint->desc.bInterval); parport_announce_port(pp); usb_set_intfdata(intf, pp); @@ -756,20 +760,20 @@ static void uss720_disconnect(struct usb_interface *intf) struct parport_uss720_private *priv; struct usb_device *usbdev; - dbg("disconnect"); + dev_dbg(&intf->dev, "disconnect\n"); usb_set_intfdata(intf, NULL); if (pp) { priv = pp->private_data; usbdev = priv->usbdev; priv->usbdev = NULL; priv->pp = NULL; - dbg("parport_remove_port"); + dev_dbg(&intf->dev, "parport_remove_port\n"); parport_remove_port(pp); parport_put_port(pp); kill_all_async_requests_priv(priv); kref_put(&priv->ref_count, destroy_priv); } - dbg("disconnect done"); + dev_dbg(&intf->dev, "disconnect done\n"); } /* table of cables that work through this driver */ -- cgit v0.10.2 From aadd6472d904c374e31c952fbf634e21e28807e0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 May 2012 21:34:11 -0700 Subject: USB: yurex.c: remove dbg() usage dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Tomoki Sekiyama Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 1d8ad4c..42ad2e6 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -95,7 +95,7 @@ static void yurex_delete(struct kref *kref) { struct usb_yurex *dev = to_yurex_dev(kref); - dbg("yurex_delete"); + dev_dbg(&dev->interface->dev, "%s\n", __func__); usb_put_dev(dev->udev); if (dev->cntl_urb) { @@ -165,16 +165,19 @@ static void yurex_interrupt(struct urb *urb) if (i != 5) dev->bbu <<= 8; } - dbg("%s count: %lld", __func__, dev->bbu); + dev_dbg(&dev->interface->dev, "%s count: %lld\n", + __func__, dev->bbu); spin_unlock_irqrestore(&dev->lock, flags); kill_fasync(&dev->async_queue, SIGIO, POLL_IN); } else - dbg("data format error - no EOF"); + dev_dbg(&dev->interface->dev, + "data format error - no EOF\n"); break; case CMD_ACK: - dbg("%s ack: %c", __func__, buf[1]); + dev_dbg(&dev->interface->dev, "%s ack: %c\n", + __func__, buf[1]); wake_up_interruptible(&dev->waitq); break; } @@ -509,7 +512,8 @@ static ssize_t yurex_write(struct file *file, const char *user_buffer, size_t co /* send the data as the control msg */ prepare_to_wait(&dev->waitq, &wait, TASK_INTERRUPTIBLE); - dbg("%s - submit %c", __func__, dev->cntl_buffer[0]); + dev_dbg(&dev->interface->dev, "%s - submit %c\n", __func__, + dev->cntl_buffer[0]); retval = usb_submit_urb(dev->cntl_urb, GFP_KERNEL); if (retval >= 0) timeout = schedule_timeout(YUREX_WRITE_TIMEOUT); -- cgit v0.10.2 From b09bb64239c83113b8b35fa6a1ecae43d8297eaa Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 24 Apr 2012 16:19:11 +0300 Subject: usb: dwc3: gadget: implement Global Command support This will be used by the ep0 layer for implementing Set SEL Standard Request. Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 93f9973..42641ad 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -284,12 +284,14 @@ #define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10 +#define DWC3_DGCMD_STATUS(n) (((n) >> 15) & 1) +#define DWC3_DGCMD_CMDACT (1 << 10) + /* Device Endpoint Command Register */ #define DWC3_DEPCMD_PARAM_SHIFT 16 #define DWC3_DEPCMD_PARAM(x) ((x) << DWC3_DEPCMD_PARAM_SHIFT) #define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f) -#define DWC3_DEPCMD_STATUS_MASK (0x0f << 12) -#define DWC3_DEPCMD_STATUS(x) (((x) & DWC3_DEPCMD_STATUS_MASK) >> 12) +#define DWC3_DEPCMD_STATUS(x) (((x) >> 15) & 1) #define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11) #define DWC3_DEPCMD_CMDACT (1 << 10) #define DWC3_DEPCMD_CMDIOC (1 << 8) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 906db57..158d396 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -276,6 +276,33 @@ static const char *dwc3_gadget_ep_cmd_string(u8 cmd) } } +int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param) +{ + u32 timeout = 500; + u32 reg; + + dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param); + dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT); + + do { + reg = dwc3_readl(dwc->regs, DWC3_DGCMD); + if (!(reg & DWC3_DGCMD_CMDACT)) { + dev_vdbg(dwc->dev, "Command Complete --> %d\n", + DWC3_DGCMD_STATUS(reg)); + return 0; + } + + /* + * We can't sleep here, because it's also called from + * interrupt context. + */ + timeout--; + if (!timeout) + return -ETIMEDOUT; + udelay(1); + } while (1); +} + int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, unsigned cmd, struct dwc3_gadget_ep_cmd_params *params) { diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index a860008..95ef6a2 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -111,6 +111,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value); int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, unsigned cmd, struct dwc3_gadget_ep_cmd_params *params); +int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param); /** * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW -- cgit v0.10.2 From 865e09e71622f92a46b47019500632bf5bc010a8 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 24 Apr 2012 16:19:49 +0300 Subject: usb: dwc3: ep0: implement Set SEL support This patch implements Set SEL Standard Request support for dwc3 driver. It needs to issue a command to the controller passing the timing we received on the data phase of the Set SEL request. Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 42641ad..39fbd15 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -575,6 +575,10 @@ struct dwc3_request { * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @needs_fifo_resize: not all users might want fifo resizing, flag it * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes. + * @u2sel: parameter from Set SEL request. + * @u2pel: parameter from Set SEL request. + * @u1sel: parameter from Set SEL request. + * @u1pel: parameter from Set SEL request. * @ep0_next_event: hold the next expected event * @ep0state: state of endpoint zero * @link_state: link state @@ -641,7 +645,13 @@ struct dwc3 { enum dwc3_link_state link_state; enum dwc3_device_state dev_state; + u16 u2sel; + u16 u2pel; + u8 u1sel; + u8 u1pel; + u8 speed; + void *mem; struct dwc3_hwparams hwparams; diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 18494b0..9683d98 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -490,6 +490,85 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) return ret; } +static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req) +{ + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + u32 param = 0; + u32 reg; + + struct timing { + u8 u1sel; + u8 u1pel; + u16 u2sel; + u16 u2pel; + } __packed timing; + + int ret; + + memcpy(&timing, req->buf, sizeof(timing)); + + dwc->u1sel = timing.u1sel; + dwc->u1pel = timing.u1pel; + dwc->u2sel = timing.u2sel; + dwc->u2pel = timing.u2pel; + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (reg & DWC3_DCTL_INITU2ENA) + param = dwc->u2pel; + if (reg & DWC3_DCTL_INITU1ENA) + param = dwc->u1pel; + + /* + * According to Synopsys Databook, if parameter is + * greater than 125, a value of zero should be + * programmed in the register. + */ + if (param > 125) + param = 0; + + /* now that we have the time, issue DGCMD Set Sel */ + ret = dwc3_send_gadget_generic_command(dwc, + DWC3_DGCMD_SET_PERIODIC_PAR, param); + WARN_ON(ret < 0); +} + +static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + struct dwc3_ep *dep; + u16 wLength; + u16 wValue; + + if (dwc->dev_state == DWC3_DEFAULT_STATE) + return -EINVAL; + + wValue = le16_to_cpu(ctrl->wValue); + wLength = le16_to_cpu(ctrl->wLength); + + if (wLength != 6) { + dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n", + wLength); + return -EINVAL; + } + + /* + * To handle Set SEL we need to receive 6 bytes from Host. So let's + * queue a usb_request for 6 bytes. + * + * Remember, though, this controller can't handle non-wMaxPacketSize + * aligned transfers on the OUT direction, so we queue a request for + * wMaxPacketSize instead. + */ + dep = dwc->eps[0]; + dwc->ep0_usb_req.dep = dep; + dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket; + dwc->ep0_usb_req.request.buf = dwc->setup_buf; + dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl; + + return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req); +} + static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) { int ret; @@ -515,6 +594,10 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n"); ret = dwc3_ep0_set_config(dwc, ctrl); break; + case USB_REQ_SET_SEL: + dev_vdbg(dwc->dev, "USB_REQ_SET_SEL\n"); + ret = dwc3_ep0_set_sel(dwc, ctrl); + break; default: dev_vdbg(dwc->dev, "Forwarding to gadget driver\n"); ret = dwc3_ep0_delegate_req(dwc, ctrl); -- cgit v0.10.2 From 7ed6d227c3d29e156f7affbad4d4679d1e409ef2 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 25 Apr 2012 14:13:09 +0300 Subject: usb: dwc3: gadget: increase setup buffer size We want to re-use that buffer for other USB requests, so let's increase it to biggest wMaxPacketSize for ep0 so it works for everything we have in mind. Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 158d396..49ee83e 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2308,8 +2308,7 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc) goto err1; } - dwc->setup_buf = kzalloc(sizeof(*dwc->setup_buf) * 2, - GFP_KERNEL); + dwc->setup_buf = kzalloc(512, GFP_KERNEL); if (!dwc->setup_buf) { dev_err(dwc->dev, "failed to allocate setup buffer\n"); ret = -ENOMEM; -- cgit v0.10.2 From c12a0d862a900707cdc683efad39d05697d9964d Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 25 Apr 2012 10:45:05 +0300 Subject: usb: dwc3: ep0: implement support for Set Isoch Delay request This is basically a noop for DWC3. We don't have to do anything. Basically we test if the request parameters are correct, cache the Isochronous Delay and return success. Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 39fbd15..ef28bd5 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -575,6 +575,7 @@ struct dwc3_request { * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @needs_fifo_resize: not all users might want fifo resizing, flag it * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes. + * @isoch_delay: wValue from Set Isochronous Delay request; * @u2sel: parameter from Set SEL request. * @u2pel: parameter from Set SEL request. * @u1sel: parameter from Set SEL request. @@ -645,6 +646,7 @@ struct dwc3 { enum dwc3_link_state link_state; enum dwc3_device_state dev_state; + u16 isoch_delay; u16 u2sel; u16 u2pel; u8 u1sel; diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 9683d98..8d41b6a 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -569,6 +569,28 @@ static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req); } +static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + u16 wLength; + u16 wValue; + u16 wIndex; + + wValue = le16_to_cpu(ctrl->wValue); + wLength = le16_to_cpu(ctrl->wLength); + wIndex = le16_to_cpu(ctrl->wIndex); + + if (wIndex || wLength) + return -EINVAL; + + /* + * REVISIT It's unclear from Databook what to do with this + * value. For now, just cache it. + */ + dwc->isoch_delay = wValue; + + return 0; +} + static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) { int ret; @@ -598,6 +620,10 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) dev_vdbg(dwc->dev, "USB_REQ_SET_SEL\n"); ret = dwc3_ep0_set_sel(dwc, ctrl); break; + case USB_REQ_SET_ISOCH_DELAY: + dev_vdbg(dwc->dev, "USB_REQ_SET_ISOCH_DELAY\n"); + ret = dwc3_ep0_set_isoch_delay(dwc, ctrl); + break; default: dev_vdbg(dwc->dev, "Forwarding to gadget driver\n"); ret = dwc3_ep0_delegate_req(dwc, ctrl); -- cgit v0.10.2 From f898ae09a043cf9c3c4be82c04e08fcf00fe82c1 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Thu, 29 Mar 2012 18:16:54 +0000 Subject: usb: dwc3: gadget: issue Update Transfer command after queuing isoc request Issue an Update Transfer command after queuing a request to an isoc EP with an active transfer. This is required according to the dwc3 databook. Pratyush Anand reports that this fixes a problem he was having with Isoc IN transfers. Tested-by: Pratyush Anand Signed-off-by: Paul Zimmerman Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 49ee83e..31ffc5c 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -957,10 +957,12 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param, } dep->flags |= DWC3_EP_BUSY; - dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc, - dep->number); - WARN_ON_ONCE(!dep->res_trans_idx); + if (start_new) { + dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc, + dep->number); + WARN_ON_ONCE(!dep->res_trans_idx); + } return 0; } @@ -994,28 +996,37 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) list_add_tail(&req->list, &dep->request_list); + if (usb_endpoint_xfer_isoc(dep->desc) && (dep->flags & DWC3_EP_BUSY)) + dep->flags |= DWC3_EP_PENDING_REQUEST; + /* - * There is one special case: XferNotReady with - * empty list of requests. We need to kick the - * transfer here in that situation, otherwise - * we will be NAKing forever. + * There are two special cases: * - * If we get XferNotReady before gadget driver - * has a chance to queue a request, we will ACK - * the IRQ but won't be able to receive the data - * until the next request is queued. The following - * code is handling exactly that. + * 1. XferNotReady with empty list of requests. We need to kick the + * transfer here in that situation, otherwise we will be NAKing + * forever. If we get XferNotReady before gadget driver has a + * chance to queue a request, we will ACK the IRQ but won't be + * able to receive the data until the next request is queued. + * The following code is handling exactly that. + * + * 2. XferInProgress on Isoc EP with an active transfer. We need to + * kick the transfer here after queuing a request, otherwise the + * core may not see the modified TRB(s). */ if (dep->flags & DWC3_EP_PENDING_REQUEST) { - int ret; - int start_trans; + int ret; + int start_trans = 1; + u8 trans_idx = dep->res_trans_idx; - start_trans = 1; if (usb_endpoint_xfer_isoc(dep->desc) && - (dep->flags & DWC3_EP_BUSY)) + (dep->flags & DWC3_EP_BUSY)) { start_trans = 0; + WARN_ON_ONCE(!trans_idx); + } else { + trans_idx = 0; + } - ret = __dwc3_gadget_kick_transfer(dep, 0, start_trans); + ret = __dwc3_gadget_kick_transfer(dep, trans_idx, start_trans); if (ret && ret != -EBUSY) { struct dwc3 *dwc = dep->dwc; -- cgit v0.10.2 From 32445605fc2ff967326c14156f199e620ed81c10 Mon Sep 17 00:00:00 2001 From: Preston Fick Date: Mon, 30 Apr 2012 23:06:48 -0500 Subject: usb: cp210x: Corrected USB request type definitions The original request types in the cp210x driver are labled as "DEVICE_TO_HOST" and "HOST_TO_DEVICE" but the actual bit definition corresponds to a request to the interface. This has been corrected, and the actual definition for the device requests have been added. Signed-off-by: Preston Fick Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index ec30f95..e67ccf3 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -188,8 +188,10 @@ static struct usb_serial_driver * const serial_drivers[] = { }; /* Config request types */ -#define REQTYPE_HOST_TO_DEVICE 0x41 -#define REQTYPE_DEVICE_TO_HOST 0xc1 +#define REQTYPE_HOST_TO_INTERFACE 0x41 +#define REQTYPE_INTERFACE_TO_HOST 0xc1 +#define REQTYPE_HOST_TO_DEVICE 0x40 +#define REQTYPE_DEVICE_TO_HOST 0xc0 /* Config request codes */ #define CP210X_IFC_ENABLE 0x00 @@ -286,7 +288,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - request, REQTYPE_DEVICE_TO_HOST, 0x0000, + request, REQTYPE_INTERFACE_TO_HOST, 0x0000, port_priv->bInterfaceNumber, buf, size, USB_CTRL_GET_TIMEOUT); @@ -340,13 +342,13 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, if (size > 2) { result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - request, REQTYPE_HOST_TO_DEVICE, 0x0000, + request, REQTYPE_HOST_TO_INTERFACE, 0x0000, port_priv->bInterfaceNumber, buf, size, USB_CTRL_SET_TIMEOUT); } else { result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - request, REQTYPE_HOST_TO_DEVICE, data[0], + request, REQTYPE_HOST_TO_INTERFACE, data[0], port_priv->bInterfaceNumber, NULL, 0, USB_CTRL_SET_TIMEOUT); } -- cgit v0.10.2 From f370b9968a220a3d79d870dd7dee674cc0ff3d10 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Sat, 14 Apr 2012 02:54:30 +0800 Subject: xHCI: keep track of ports being resumed and indicate in hub_status_data This commit adds a bit-array to xhci bus_state for keeping track of which ports are undergoing a resume transition. If any of the bits are set when xhci_hub_status_data() is called, the routine will return a non-zero value even if no ports have any status changes pending. This will allow usbcore to handle races between root-hub suspend and port wakeup. This patch should be backported to kernels as old as 3.4, that contain the commit 879d38e6bc36d73b0ac40ec9b0d839fda9fa8b1a "USB: fix race between root-hub suspend and remote wakeup". Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Cc: Alan Stern Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 673ad12..89850a8 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -558,6 +558,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); xhci_set_link_state(xhci, port_array, wIndex, XDEV_U0); xhci_dbg(xhci, "set port %d resume\n", @@ -845,7 +846,12 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) /* Initial status is no changes */ retval = (max_ports + 8) / 8; memset(buf, 0, retval); - status = 0; + + /* + * Inform the usbcore about resume-in-progress by returning + * a non-zero value even if there are no status changes. + */ + status = bus_state->resuming_ports; mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC; @@ -885,15 +891,11 @@ int xhci_bus_suspend(struct usb_hcd *hcd) spin_lock_irqsave(&xhci->lock, flags); if (hcd->self.root_hub->do_remote_wakeup) { - port_index = max_ports; - while (port_index--) { - if (bus_state->resume_done[port_index] != 0) { - spin_unlock_irqrestore(&xhci->lock, flags); - xhci_dbg(xhci, "suspend failed because " - "port %d is resuming\n", - port_index + 1); - return -EBUSY; - } + if (bus_state->resuming_ports) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "suspend failed because " + "a port is resuming\n"); + return -EBUSY; } } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 3d9422f..cb1de11 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1377,6 +1377,7 @@ static void handle_port_status(struct xhci_hcd *xhci, xhci_dbg(xhci, "resume HS port %d\n", port_id); bus_state->resume_done[faked_port_index] = jiffies + msecs_to_jiffies(20); + set_bit(faked_port_index, &bus_state->resuming_ports); mod_timer(&hcd->rh_timer, bus_state->resume_done[faked_port_index]); /* Do the rest in GetPortStatus */ diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 36641a7..5910048 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -152,7 +152,7 @@ int xhci_reset(struct xhci_hcd *xhci) { u32 command; u32 state; - int ret; + int ret, i; state = xhci_readl(xhci, &xhci->op_regs->status); if ((state & STS_HALT) == 0) { @@ -175,7 +175,15 @@ int xhci_reset(struct xhci_hcd *xhci) * xHCI cannot write to any doorbells or operational registers other * than status until the "Controller Not Ready" flag is cleared. */ - return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); + ret = handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); + + for (i = 0; i < 2; ++i) { + xhci->bus_state[i].port_c_suspend = 0; + xhci->bus_state[i].suspended_ports = 0; + xhci->bus_state[i].resuming_ports = 0; + } + + return ret; } #ifdef CONFIG_PCI diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 3d69c4b..ce1edd7 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1362,6 +1362,8 @@ struct xhci_bus_state { u32 suspended_ports; u32 port_remote_wakeup; unsigned long resume_done[USB_MAXCHILDREN]; + /* which ports have started to resume */ + unsigned long resuming_ports; }; static inline unsigned int hcd_index(struct usb_hcd *hcd) -- cgit v0.10.2 From 9c745995ae5c4ff787f34a359de908facc11ee00 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 23 Apr 2012 15:06:09 +0200 Subject: usb-xhci: Handle COMP_TX_ERR for isoc tds While testing unplugging an UVC HD webcam with usb-redirection (so through usbdevfs), my userspace usb-redir code was getting a value of -1 in iso_frame_desc[n].status, which according to Documentation/usb/error-codes.txt is not a valid value. The source of this -1 is the default case in xhci-ring.c:process_isoc_td() adding a kprintf there showed the value of trb_comp_code to be COMP_TX_ERR in this case, so this patch adds handling for that completion code to process_isoc_td(). This was observed and tested with the following xhci controller: 1033:0194 NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) Note: I also wonder if setting frame->status to -1 (-EPERM) is the best we can do, but since I cannot come up with anything better I've left that as is. This patch should be backported to kernels as old as 2.6.36, which contain the commit 04e51901dd44f40a5a385ced897f6bca87d5f40a "USB: xHCI: Isochronous transfer implementation". Signed-off-by: Hans de Goede Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index cb1de11..d40194c 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1804,6 +1804,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, break; case COMP_DEV_ERR: case COMP_STALL: + case COMP_TX_ERR: frame->status = -EPROTO; skip_td = true; break; -- cgit v0.10.2 From 51c9e6c7732b67769c0a514d31f505e49fa82dd4 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 16 Apr 2012 10:56:47 -0700 Subject: xhci: Avoid dead ports when CONFIG_USB_XHCI_HCD=n If the user chooses to say "no" to CONFIG_USB_XHCI_HCD on a system with an Intel Panther Point chipset, the PCI quirks code or the EHCI driver will switch the ports over to the xHCI host, but the xHCI driver will never load. The ports will be powered off and seem "dead" to the user. Fix this by only switching the ports over if CONFIG_USB_XHCI_HCD is either compiled in, or compiled as a module. This patch should be backported to stable kernels as old as 3.0, that contain commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Sarah Sharp Reported-by: Eric Anholt Reported-by: David Bein Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 32dada8..39b2612 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -9,6 +9,7 @@ */ #include +#include #include #include #include @@ -742,6 +743,19 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) { u32 ports_available; + /* Don't switchover the ports if the user hasn't compiled the xHCI + * driver. Otherwise they will see "dead" USB ports that don't power + * the devices. + */ + if (!IS_ENABLED(CONFIG_USB_XHCI_HCD)) { + dev_warn(&xhci_pdev->dev, + "CONFIG_USB_XHCI_HCD is turned off, " + "defaulting to EHCI.\n"); + dev_warn(&xhci_pdev->dev, + "USB 3.0 devices will work at USB 2.0 speeds.\n"); + return; + } + ports_available = 0xffffffff; /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable * Register, to turn on SuperSpeed terminations for all -- cgit v0.10.2 From 1c12443ab8eba71a658fae4572147e56d1f84f66 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 9 Feb 2012 15:55:13 -0800 Subject: xhci: Add Lynx Point to list of Intel switchable hosts. The upcoming Intel Lynx Point chipset includes an xHCI host controller that can have ports switched from the EHCI host controller, just like the Intel Panther Point xHCI host. This time, ports from both EHCI hosts can be switched to the xHCI host controller. The PCI config registers to do the port switching are in the exact same place in the xHCI PCI configuration registers, with the same semantics. Hooray for shipping patches for next-gen hardware before the current gen hardware is even available for purchase! This patch should be backported to stable kernels as old as 3.0, that contain commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 01bb7241d..1234817 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -360,7 +360,9 @@ static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev) { return pdev->class == PCI_CLASS_SERIAL_USB_EHCI && pdev->vendor == PCI_VENDOR_ID_INTEL && - pdev->device == 0x1E26; + (pdev->device == 0x1E26 || + pdev->device == 0x8C2D || + pdev->device == 0x8C26); } static void ehci_enable_xhci_companion(void) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 39b2612..df0828c 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -713,12 +713,28 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done, return -ETIMEDOUT; } -bool usb_is_intel_switchable_xhci(struct pci_dev *pdev) +#define PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI 0x8C31 + +bool usb_is_intel_ppt_switchable_xhci(struct pci_dev *pdev) { return pdev->class == PCI_CLASS_SERIAL_USB_XHCI && pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI; } + +/* The Intel Lynx Point chipset also has switchable ports. */ +bool usb_is_intel_lpt_switchable_xhci(struct pci_dev *pdev) +{ + return pdev->class == PCI_CLASS_SERIAL_USB_XHCI && + pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI; +} + +bool usb_is_intel_switchable_xhci(struct pci_dev *pdev) +{ + return usb_is_intel_ppt_switchable_xhci(pdev) || + usb_is_intel_lpt_switchable_xhci(pdev); +} EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci); /* -- cgit v0.10.2 From d8789b2b90aeb53ce59ac232d2ff0d8357d53893 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:39:27 -0700 Subject: USB: serial: pl2303: convert dbg() calls to dev_dbg() This converts the usage of dbg() to dev_dbg() where needed, and removed a bunch of these calls where they were just "tracing" calls, which are no longer needed. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index c6bb88d..9eec2c3 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -159,8 +159,9 @@ static int pl2303_vendor_read(__u16 value, __u16 index, int res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE, value, index, buf, 1, 100); - dbg("0x%x:0x%x:0x%x:0x%x %d - %x", VENDOR_READ_REQUEST_TYPE, - VENDOR_READ_REQUEST, value, index, res, buf[0]); + dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x %d - %x\n", + VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, value, index, + res, buf[0]); return res; } @@ -170,8 +171,9 @@ static int pl2303_vendor_write(__u16 value, __u16 index, int res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE, value, index, NULL, 0, 100); - dbg("0x%x:0x%x:0x%x:0x%x %d", VENDOR_WRITE_REQUEST_TYPE, - VENDOR_WRITE_REQUEST, value, index, res); + dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x %d\n", + VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, value, index, + res); return res; } @@ -194,7 +196,7 @@ static int pl2303_startup(struct usb_serial *serial) type = type_1; else if (serial->dev->descriptor.bDeviceClass == 0xFF) type = type_1; - dbg("device type: %d", type); + dev_dbg(&serial->interface->dev, "device type: %d\n", type); for (i = 0; i < serial->num_ports; ++i) { priv = kzalloc(sizeof(struct pl2303_private), GFP_KERNEL); @@ -241,7 +243,8 @@ static int set_control_lines(struct usb_device *dev, u8 value) retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE, value, 0, NULL, 0, 100); - dbg("%s - value = %d, retval = %d", __func__, value, retval); + dev_dbg(&dev->dev, "%s - value = %d, retval = %d\n", __func__, + value, retval); return retval; } @@ -263,8 +266,6 @@ static void pl2303_set_termios(struct tty_struct *tty, int baud_floor, baud_ceil; int k; - dbg("%s - port %d", __func__, port->number); - /* The PL2303 is reported to lose bytes if you change serial settings even to the same values as before. Thus we actually need to filter in this specific case */ @@ -285,7 +286,7 @@ static void pl2303_set_termios(struct tty_struct *tty, i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, 0, 0, buf, 7, 100); - dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, + dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x\n", i, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); if (cflag & CSIZE) { @@ -304,7 +305,7 @@ static void pl2303_set_termios(struct tty_struct *tty, buf[6] = 8; break; } - dbg("%s - data bits = %d", __func__, buf[6]); + dev_dbg(&port->dev, "data bits = %d\n", buf[6]); } /* For reference buf[0]:buf[3] baud rate value */ @@ -313,7 +314,7 @@ static void pl2303_set_termios(struct tty_struct *tty, * 9600 baud (at least my PL2303X always does) */ baud = tty_get_baud_rate(tty); - dbg("%s - baud requested = %d", __func__, baud); + dev_dbg(&port->dev, "baud requested = %d\n", baud); if (baud) { /* Set baudrate to nearest supported value */ for (k=0; k 6000000) baud = 6000000; } - dbg("%s - baud set = %d", __func__, baud); + dev_dbg(&port->dev, "baud set = %d\n", baud); if (baud <= 115200) { buf[0] = baud & 0xff; buf[1] = (baud >> 8) & 0xff; @@ -370,14 +371,14 @@ static void pl2303_set_termios(struct tty_struct *tty, */ if ((cflag & CSIZE) == CS5) { buf[4] = 1; - dbg("%s - stop bits = 1.5", __func__); + dev_dbg(&port->dev, "stop bits = 1.5\n"); } else { buf[4] = 2; - dbg("%s - stop bits = 2", __func__); + dev_dbg(&port->dev, "stop bits = 2\n"); } } else { buf[4] = 0; - dbg("%s - stop bits = 1", __func__); + dev_dbg(&port->dev, "stop bits = 1\n"); } if (cflag & PARENB) { @@ -389,29 +390,29 @@ static void pl2303_set_termios(struct tty_struct *tty, if (cflag & PARODD) { if (cflag & CMSPAR) { buf[5] = 3; - dbg("%s - parity = mark", __func__); + dev_dbg(&port->dev, "parity = mark\n"); } else { buf[5] = 1; - dbg("%s - parity = odd", __func__); + dev_dbg(&port->dev, "parity = odd\n"); } } else { if (cflag & CMSPAR) { buf[5] = 4; - dbg("%s - parity = space", __func__); + dev_dbg(&port->dev, "parity = space\n"); } else { buf[5] = 2; - dbg("%s - parity = even", __func__); + dev_dbg(&port->dev, "parity = even\n"); } } } else { buf[5] = 0; - dbg("%s - parity = none", __func__); + dev_dbg(&port->dev, "parity = none\n"); } i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE, 0, 0, buf, 7, 100); - dbg("0x21:0x20:0:0 %d", i); + dev_dbg(&port->dev, "0x21:0x20:0:0 %d\n", i); /* change control lines if we are switching to or from B0 */ spin_lock_irqsave(&priv->lock, flags); @@ -433,7 +434,7 @@ static void pl2303_set_termios(struct tty_struct *tty, i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, 0, 0, buf, 7, 100); - dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, + dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x\n", i, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); if (cflag & CRTSCTS) { @@ -471,8 +472,6 @@ static void pl2303_dtr_rts(struct usb_serial_port *port, int on) static void pl2303_close(struct usb_serial_port *port) { - dbg("%s - port %d", __func__, port->number); - usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); } @@ -484,8 +483,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) struct pl2303_private *priv = usb_get_serial_port_data(port); int result; - dbg("%s - port %d", __func__, port->number); - if (priv->type != HX) { usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); @@ -499,7 +496,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) if (tty) pl2303_set_termios(tty, port, &tmp_termios); - dbg("%s - submitting interrupt urb", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting interrupt urb," @@ -558,8 +554,6 @@ static int pl2303_tiocmget(struct tty_struct *tty) unsigned int status; unsigned int result; - dbg("%s (%d)", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); mcr = priv->line_control; status = priv->line_status; @@ -572,7 +566,7 @@ static int pl2303_tiocmget(struct tty_struct *tty) | ((status & UART_RING) ? TIOCM_RI : 0) | ((status & UART_DCD) ? TIOCM_CD : 0); - dbg("%s - result = %x", __func__, result); + dev_dbg(&port->dev, "%s - result = %x\n", __func__, result); return result; } @@ -626,7 +620,8 @@ static int pl2303_ioctl(struct tty_struct *tty, { struct serial_struct ser; struct usb_serial_port *port = tty->driver_data; - dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); + + dev_dbg(&port->dev, "%s cmd = 0x%04x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: @@ -642,10 +637,10 @@ static int pl2303_ioctl(struct tty_struct *tty, return 0; case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__); return wait_modem_info(port, arg); default: - dbg("%s not supported = 0x%04x", __func__, cmd); + dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd); break; } return -ENOIOCTLCMD; @@ -658,20 +653,18 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state) u16 state; int result; - dbg("%s - port %d", __func__, port->number); - if (break_state == 0) state = BREAK_OFF; else state = BREAK_ON; - dbg("%s - turning break %s", __func__, + dev_dbg(&port->dev, "%s - turning break %s\n", __func__, state == BREAK_OFF ? "off" : "on"); result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), BREAK_REQUEST, BREAK_REQUEST_TYPE, state, 0, NULL, 0, 100); if (result) - dbg("%s - error sending break = %d", __func__, result); + dev_err(&port->dev, "error sending break = %d\n", result); } static void pl2303_release(struct usb_serial *serial) @@ -679,8 +672,6 @@ static void pl2303_release(struct usb_serial *serial) int i; struct pl2303_private *priv; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; ++i) { priv = usb_get_serial_port_data(serial->port[i]); kfree(priv); @@ -743,8 +734,6 @@ static void pl2303_read_int_callback(struct urb *urb) int status = urb->status; int retval; - dbg("%s (%d)", __func__, port->number); - switch (status) { case 0: /* success */ @@ -753,12 +742,12 @@ static void pl2303_read_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - status); + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - status); + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); goto exit; } @@ -770,7 +759,7 @@ static void pl2303_read_int_callback(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&urb->dev->dev, + dev_err(&port->dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } @@ -808,7 +797,7 @@ static void pl2303_process_read_urb(struct urb *urb) tty_flag = TTY_PARITY; else if (line_status & UART_FRAME_ERROR) tty_flag = TTY_FRAME; - dbg("%s - tty_flag = %d", __func__, tty_flag); + dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag); /* overrun is special, not associated with a char */ if (line_status & UART_OVERRUN_ERROR) -- cgit v0.10.2 From 4d9b4001e0cb180b8e1c9ffd7bb4372e48f207c6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:40:45 -0700 Subject: USB: serial: visor: convert dbg() to dev_dbg() This removes most of the dbg() calls, as they were just tracing calls, and converts the remaining ones to dev_dbg(). Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index aa8911d..d9b41fa 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -239,8 +239,6 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port) { int result = 0; - dbg("%s - port %d", __func__, port->number); - if (!port->read_urb) { /* this is needed for some brain dead Sony devices */ dev_err(&port->dev, "Device lied about number of ports, please use a lower one.\n"); @@ -253,7 +251,7 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port) goto exit; if (port->interrupt_in_urb) { - dbg("%s - adding interrupt input for treo", __func__); + dev_dbg(&port->dev, "adding interrupt input for treo\n"); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) dev_err(&port->dev, @@ -269,8 +267,6 @@ static void visor_close(struct usb_serial_port *port) { unsigned char *transfer_buffer; - dbg("%s - port %d", __func__, port->number); - /* shutdown our urbs */ usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); @@ -305,12 +301,12 @@ static void visor_read_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", - __func__, status); + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); goto exit; } @@ -343,8 +339,6 @@ static int palm_os_3_probe(struct usb_serial *serial, int i; int num_ports = 0; - dbg("%s", __func__); - transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL); if (!transfer_buffer) { dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__, @@ -440,8 +434,6 @@ static int palm_os_4_probe(struct usb_serial *serial, unsigned char *transfer_buffer; int retval; - dbg("%s", __func__); - transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL); if (!transfer_buffer) { dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__, @@ -473,8 +465,6 @@ static int visor_probe(struct usb_serial *serial, int (*startup)(struct usb_serial *serial, const struct usb_device_id *id); - dbg("%s", __func__); - /* * some Samsung Android phones in modem mode have the same ID * as SPH-I500, but they are ACM devices, so dont bind to them @@ -516,8 +506,6 @@ static int clie_3_5_startup(struct usb_serial *serial) int result; u8 *data; - dbg("%s", __func__); - data = kmalloc(1, GFP_KERNEL); if (!data) return -ENOMEM; @@ -580,8 +568,6 @@ static int treo_attach(struct usb_serial *serial) (serial->num_interrupt_in == 0)) return 0; - dbg("%s", __func__); - /* * It appears that Treos and Kyoceras want to use the * 1st bulk in endpoint to communicate with the 2nd bulk out endpoint, @@ -617,8 +603,6 @@ static int clie_5_attach(struct usb_serial *serial) unsigned int pipe; int j; - dbg("%s", __func__); - /* TH55 registers 2 ports. Communication in from the UX50/TH55 uses bulk_in_endpointAddress from port 0. Communication out to the UX50/TH55 uses -- cgit v0.10.2 From d17a44db94c792ce3e349838286c3e3c0bfbf52f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:43:52 -0700 Subject: USB: belkin_sa.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: William Greathouse Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 35b0d3d..2007385 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -159,8 +159,6 @@ static void belkin_sa_release(struct usb_serial *serial) { int i; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; ++i) kfree(usb_get_serial_port_data(serial->port[i])); } @@ -170,8 +168,6 @@ static int belkin_sa_open(struct tty_struct *tty, { int retval; - dbg("%s port %d", __func__, port->number); - retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (retval) { dev_err(&port->dev, "usb_submit_urb(read int) failed\n"); @@ -187,8 +183,6 @@ static int belkin_sa_open(struct tty_struct *tty, static void belkin_sa_close(struct usb_serial_port *port) { - dbg("%s port %d", __func__, port->number); - usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); } @@ -464,8 +458,6 @@ static int belkin_sa_tiocmget(struct tty_struct *tty) unsigned long control_state; unsigned long flags; - dbg("%s", __func__); - spin_lock_irqsave(&priv->lock, flags); control_state = priv->control_state; spin_unlock_irqrestore(&priv->lock, flags); @@ -485,8 +477,6 @@ static int belkin_sa_tiocmset(struct tty_struct *tty, int rts = 0; int dtr = 0; - dbg("%s", __func__); - spin_lock_irqsave(&priv->lock, flags); control_state = priv->control_state; -- cgit v0.10.2 From 2ec7d459c0b557d7f09d57261052601710479054 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:43:55 -0700 Subject: USB: ch341.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Johan Hovold CC: Rusty Russell CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index aaab32d..70c46b0 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -125,8 +125,6 @@ static int ch341_set_baudrate(struct usb_device *dev, unsigned long factor; short divisor; - dbg("ch341_set_baudrate(%d)", priv->baud_rate); - if (!priv->baud_rate) return -EINVAL; factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate); @@ -153,7 +151,6 @@ static int ch341_set_baudrate(struct usb_device *dev, static int ch341_set_handshake(struct usb_device *dev, u8 control) { - dbg("ch341_set_handshake(0x%02x)", control); return ch341_control_out(dev, 0xa4, ~control, 0); } @@ -164,8 +161,6 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) const unsigned size = 8; unsigned long flags; - dbg("ch341_get_status()"); - buffer = kmalloc(size, GFP_KERNEL); if (!buffer) return -ENOMEM; @@ -196,8 +191,6 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) int r; const unsigned size = 8; - dbg("ch341_configure()"); - buffer = kmalloc(size, GFP_KERNEL); if (!buffer) return -ENOMEM; @@ -254,8 +247,6 @@ static int ch341_attach(struct usb_serial *serial) struct ch341_private *priv; int r; - dbg("ch341_attach()"); - /* private data */ priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL); if (!priv) @@ -290,7 +281,6 @@ static void ch341_dtr_rts(struct usb_serial_port *port, int on) struct ch341_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __func__, port->number); /* drop DTR and RTS */ spin_lock_irqsave(&priv->lock, flags); if (on) @@ -304,8 +294,6 @@ static void ch341_dtr_rts(struct usb_serial_port *port, int on) static void ch341_close(struct usb_serial_port *port) { - dbg("%s - port %d", __func__, port->number); - usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); } @@ -318,8 +306,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]); int r; - dbg("ch341_open()"); - priv->baud_rate = DEFAULT_BAUD_RATE; r = ch341_configure(serial->dev, priv); @@ -358,8 +344,6 @@ static void ch341_set_termios(struct tty_struct *tty, unsigned baud_rate; unsigned long flags; - dbg("ch341_set_termios()"); - baud_rate = tty_get_baud_rate(tty); priv->baud_rate = baud_rate; @@ -393,8 +377,6 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state) uint16_t reg_contents; uint8_t *break_reg; - dbg("%s()", __func__); - break_reg = kmalloc(2, GFP_KERNEL); if (!break_reg) { dev_err(&port->dev, "%s - kmalloc failed\n", __func__); @@ -461,8 +443,6 @@ static void ch341_read_int_callback(struct urb *urb) unsigned int actual_length = urb->actual_length; int status; - dbg("%s (%d)", __func__, port->number); - switch (urb->status) { case 0: /* success */ @@ -580,8 +560,6 @@ static int ch341_tiocmget(struct tty_struct *tty) u8 status; unsigned int result; - dbg("%s (%d)", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); mcr = priv->line_control; status = priv->line_status; -- cgit v0.10.2 From b978a5a11b6e1b65cebe2bb8aaff8abe2e29fca7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:43:57 -0700 Subject: USB: cp210x.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Johan Hovold CC: Preston Fick CC: Yuri Matylitski CC: Rusty Russell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index e67ccf3..81468c0 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -424,8 +424,6 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) { int result; - dbg("%s - port %d", __func__, port->number); - result = cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE); if (result) { @@ -445,8 +443,6 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) static void cp210x_close(struct usb_serial_port *port) { - dbg("%s - port %d", __func__, port->number); - usb_serial_generic_close(port); mutex_lock(&port->serial->disc_mutex); @@ -490,8 +486,6 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int baud; unsigned int bits; - dbg("%s - port %d", __func__, port->number); - cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4); dbg("%s - baud rate = %d", __func__, baud); @@ -789,8 +783,6 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, { unsigned int control = 0; - dbg("%s - port %d", __func__, port->number); - if (set & TIOCM_RTS) { control |= CONTROL_RTS; control |= CONTROL_WRITE_RTS; @@ -827,8 +819,6 @@ static int cp210x_tiocmget (struct tty_struct *tty) unsigned int control; int result; - dbg("%s - port %d", __func__, port->number); - cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1); result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) @@ -848,7 +838,6 @@ static void cp210x_break_ctl (struct tty_struct *tty, int break_state) struct usb_serial_port *port = tty->driver_data; unsigned int state; - dbg("%s - port %d", __func__, port->number); if (break_state == 0) state = BREAK_OFF; else -- cgit v0.10.2 From b627488c19451439de9ec8a7bf2fa1649110fc1b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:43:58 -0700 Subject: USB: cyberjack.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Matthias Bruestle and Harald Welte Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index d39b941..7b804fd 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -122,8 +122,6 @@ static int cyberjack_startup(struct usb_serial *serial) struct cyberjack_private *priv; int i; - dbg("%s", __func__); - /* allocate the private data structure */ priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL); if (!priv) @@ -155,8 +153,6 @@ static void cyberjack_disconnect(struct usb_serial *serial) { int i; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; ++i) usb_kill_urb(serial->port[i]->interrupt_in_urb); } @@ -165,8 +161,6 @@ static void cyberjack_release(struct usb_serial *serial) { int i; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; ++i) { /* My special items, the standard routines free my urbs */ kfree(usb_get_serial_port_data(serial->port[i])); @@ -180,8 +174,6 @@ static int cyberjack_open(struct tty_struct *tty, unsigned long flags; int result = 0; - dbg("%s - port %d", __func__, port->number); - dbg("%s - usb_clear_halt", __func__); usb_clear_halt(port->serial->dev, port->write_urb->pipe); @@ -197,8 +189,6 @@ static int cyberjack_open(struct tty_struct *tty, static void cyberjack_close(struct usb_serial_port *port) { - dbg("%s - port %d", __func__, port->number); - if (port->serial->dev) { /* shutdown any bulk reads that might be going on */ usb_kill_urb(port->write_urb); @@ -214,8 +204,6 @@ static int cyberjack_write(struct tty_struct *tty, int result; int wrexpected; - dbg("%s - port %d", __func__, port->number); - if (count == 0) { dbg("%s - write request of 0 bytes", __func__); return 0; @@ -307,8 +295,6 @@ static void cyberjack_read_int_callback(struct urb *urb) int status = urb->status; int result; - dbg("%s - port %d", __func__, port->number); - /* the urb might have been killed. */ if (status) return; @@ -367,8 +353,6 @@ static void cyberjack_read_bulk_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s - port %d", __func__, port->number); - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); if (status) { @@ -417,8 +401,6 @@ static void cyberjack_write_bulk_callback(struct urb *urb) struct cyberjack_private *priv = usb_get_serial_port_data(port); int status = urb->status; - dbg("%s - port %d", __func__, port->number); - set_bit(0, &port->write_urbs_free); if (status) { dbg("%s - nonzero write bulk status received: %d", -- cgit v0.10.2 From 108feb66ac273ab0f949a3f78526dc0c03ee9d87 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:43:58 -0700 Subject: USB: cypress_m8.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Lonnie Mendez Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index afc886c..6fac26c 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -305,8 +305,6 @@ static int cypress_serial_control(struct tty_struct *tty, const unsigned int feature_len = 5; unsigned long flags; - dbg("%s", __func__); - priv = usb_get_serial_port_data(port); if (!priv->comm_is_ok) @@ -451,8 +449,6 @@ static int generic_startup(struct usb_serial *serial) struct cypress_private *priv; struct usb_serial_port *port = serial->port[0]; - dbg("%s - port %d", __func__, port->number); - priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -505,8 +501,6 @@ static int cypress_earthmate_startup(struct usb_serial *serial) struct cypress_private *priv; struct usb_serial_port *port = serial->port[0]; - dbg("%s", __func__); - if (generic_startup(serial)) { dbg("%s - Failed setting up port %d", __func__, port->number); @@ -537,8 +531,6 @@ static int cypress_hidcom_startup(struct usb_serial *serial) { struct cypress_private *priv; - dbg("%s", __func__); - if (generic_startup(serial)) { dbg("%s - Failed setting up port %d", __func__, serial->port[0]->number); @@ -556,8 +548,6 @@ static int cypress_ca42v2_startup(struct usb_serial *serial) { struct cypress_private *priv; - dbg("%s", __func__); - if (generic_startup(serial)) { dbg("%s - Failed setting up port %d", __func__, serial->port[0]->number); @@ -575,10 +565,7 @@ static void cypress_release(struct usb_serial *serial) { struct cypress_private *priv; - dbg("%s - port %d", __func__, serial->port[0]->number); - /* all open ports are closed at this point */ - priv = usb_get_serial_port_data(serial->port[0]); if (priv) { @@ -595,8 +582,6 @@ static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port) unsigned long flags; int result = 0; - dbg("%s - port %d", __func__, port->number); - if (!priv->comm_is_ok) return -EIO; @@ -661,8 +646,6 @@ static void cypress_close(struct usb_serial_port *port) struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __func__, port->number); - /* writing is potentially harmful, lock must be taken */ mutex_lock(&port->serial->disc_mutex); if (port->serial->disconnected) { @@ -720,7 +703,6 @@ static void cypress_send(struct usb_serial_port *port) if (!priv->comm_is_ok) return; - dbg("%s - port %d", __func__, port->number); dbg("%s - interrupt out size is %d", __func__, port->interrupt_out_size); @@ -828,8 +810,6 @@ static int cypress_write_room(struct tty_struct *tty) int room = 0; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); room = kfifo_avail(&priv->write_fifo); spin_unlock_irqrestore(&priv->lock, flags); @@ -847,8 +827,6 @@ static int cypress_tiocmget(struct tty_struct *tty) unsigned int result = 0; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); control = priv->line_control; status = priv->current_status; @@ -874,8 +852,6 @@ static int cypress_tiocmset(struct tty_struct *tty, struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); if (set & TIOCM_RTS) priv->line_control |= CONTROL_RTS; @@ -948,8 +924,6 @@ static void cypress_set_termios(struct tty_struct *tty, __u8 oldlines; int linechange = 0; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); /* We can't clean this one up as we don't know the device type early enough */ @@ -1096,8 +1070,6 @@ static int cypress_chars_in_buffer(struct tty_struct *tty) int chars = 0; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); chars = kfifo_len(&priv->write_fifo); spin_unlock_irqrestore(&priv->lock, flags); @@ -1112,8 +1084,6 @@ static void cypress_throttle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); - dbg("%s - port %d", __func__, port->number); - spin_lock_irq(&priv->lock); priv->rx_flags = THROTTLED; spin_unlock_irq(&priv->lock); @@ -1126,8 +1096,6 @@ static void cypress_unthrottle(struct tty_struct *tty) struct cypress_private *priv = usb_get_serial_port_data(port); int actually_throttled, result; - dbg("%s - port %d", __func__, port->number); - spin_lock_irq(&priv->lock); actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED; priv->rx_flags = 0; @@ -1161,8 +1129,6 @@ static void cypress_read_int_callback(struct urb *urb) int i = 0; int status = urb->status; - dbg("%s - port %d", __func__, port->number); - switch (status) { case 0: /* success */ break; @@ -1303,8 +1269,6 @@ static void cypress_write_int_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s - port %d", __func__, port->number); - switch (status) { case 0: /* success */ -- cgit v0.10.2 From a1bd88697533b37db292e67d04744a0c9f71c089 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:43:59 -0700 Subject: USB: digi_acceleport.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Peter Berger CC: Al Borchers Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 999f91b..f8dad3a 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -657,9 +657,6 @@ static void digi_rx_throttle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; struct digi_port *priv = usb_get_serial_port_data(port); - - dbg("digi_rx_throttle: TOP: port=%d", priv->dp_port_num); - /* stop receiving characters by not resubmitting the read urb */ spin_lock_irqsave(&priv->dp_port_lock, flags); priv->dp_throttled = 1; @@ -675,8 +672,6 @@ static void digi_rx_unthrottle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; struct digi_port *priv = usb_get_serial_port_data(port); - dbg("digi_rx_unthrottle: TOP: port=%d", priv->dp_port_num); - spin_lock_irqsave(&priv->dp_port_lock, flags); /* restart read chain */ @@ -904,8 +899,6 @@ static int digi_tiocmget(struct tty_struct *tty) unsigned int val; unsigned long flags; - dbg("%s: TOP: port=%d", __func__, priv->dp_port_num); - spin_lock_irqsave(&priv->dp_port_lock, flags); val = priv->dp_modem_signals; spin_unlock_irqrestore(&priv->dp_port_lock, flags); @@ -921,8 +914,6 @@ static int digi_tiocmset(struct tty_struct *tty, unsigned int val; unsigned long flags; - dbg("%s: TOP: port=%d", __func__, priv->dp_port_num); - spin_lock_irqsave(&priv->dp_port_lock, flags); val = (priv->dp_modem_signals & ~clear) | set; spin_unlock_irqrestore(&priv->dp_port_lock, flags); @@ -1013,8 +1004,6 @@ static void digi_write_bulk_callback(struct urb *urb) int ret = 0; int status = urb->status; - dbg("digi_write_bulk_callback: TOP, status=%d", status); - /* port and serial sanity check */ if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) { pr_err("%s: port or port->private is NULL, status=%d\n", @@ -1121,8 +1110,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port) struct digi_port *priv = usb_get_serial_port_data(port); struct ktermios not_termios; - dbg("digi_open: TOP: port=%d", priv->dp_port_num); - /* be sure the device is started up */ if (digi_startup_device(port->serial) != 0) return -ENXIO; @@ -1160,8 +1147,6 @@ static void digi_close(struct usb_serial_port *port) unsigned char buf[32]; struct digi_port *priv = usb_get_serial_port_data(port); - dbg("digi_close: TOP: port=%d", priv->dp_port_num); - mutex_lock(&port->serial->disc_mutex); /* if disconnected, just clear flags */ if (port->serial->disconnected) @@ -1220,7 +1205,6 @@ exit: wake_up_interruptible(&priv->dp_close_wait); spin_unlock_irq(&priv->dp_port_lock); mutex_unlock(&port->serial->disc_mutex); - dbg("digi_close: done"); } @@ -1269,8 +1253,6 @@ static int digi_startup(struct usb_serial *serial) struct digi_port *priv; struct digi_serial *serial_priv; - dbg("digi_startup: TOP"); - /* allocate the private data structures for all ports */ /* number of regular ports + 1 for the out-of-band port */ for (i = 0; i < serial->type->num_ports + 1; i++) { @@ -1325,7 +1307,6 @@ static int digi_startup(struct usb_serial *serial) static void digi_disconnect(struct usb_serial *serial) { int i; - dbg("digi_disconnect: TOP, in_interrupt()=%ld", in_interrupt()); /* stop reads and writes on all ports */ for (i = 0; i < serial->type->num_ports + 1; i++) { @@ -1338,7 +1319,6 @@ static void digi_disconnect(struct usb_serial *serial) static void digi_release(struct usb_serial *serial) { int i; - dbg("digi_release: TOP, in_interrupt()=%ld", in_interrupt()); /* free the private data structures for all ports */ /* number of regular ports + 1 for the out-of-band port */ @@ -1356,8 +1336,6 @@ static void digi_read_bulk_callback(struct urb *urb) int ret; int status = urb->status; - dbg("digi_read_bulk_callback: TOP"); - /* port sanity check, do not resubmit if port is not valid */ if (port == NULL) return; @@ -1507,9 +1485,6 @@ static int digi_read_oob_callback(struct urb *urb) int i; unsigned int rts; - dbg("digi_read_oob_callback: port=%d, len=%d", - priv->dp_port_num, urb->actual_length); - /* handle each oob command */ for (i = 0; i < urb->actual_length - 3;) { opcode = ((unsigned char *)urb->transfer_buffer)[i++]; -- cgit v0.10.2 From 4e512ab935e4e3cecfba57710a3beb24fe6a2f81 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:43:59 -0700 Subject: USB: empeg.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Gary Brubaker Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 5b99fc0..615e380 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -80,14 +80,12 @@ static int empeg_startup(struct usb_serial *serial) { int r; - dbg("%s", __func__); - if (serial->dev->actconfig->desc.bConfigurationValue != 1) { dev_err(&serial->dev->dev, "active config #%d != 1 ??\n", serial->dev->actconfig->desc.bConfigurationValue); return -ENODEV; } - dbg("%s - reset config", __func__); + r = usb_reset_configuration(serial->dev); /* continue on with initialization */ -- cgit v0.10.2 From 005331f4c4345ed714dc9e35b861f6866394da5d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:02 -0700 Subject: USB: ezusb.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c index 3cfc762..800e8eb 100644 --- a/drivers/usb/serial/ezusb.c +++ b/drivers/usb/serial/ezusb.c @@ -26,7 +26,6 @@ int ezusb_writememory(struct usb_serial *serial, int address, int result; unsigned char *transfer_buffer; - /* dbg("ezusb_writememory %x, %d", address, length); */ if (!serial->dev) { printk(KERN_ERR "ezusb: %s - no physical device present, " "failing.\n", __func__); @@ -50,7 +49,6 @@ int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit) { int response; - /* dbg("%s - %d", __func__, reset_bit); */ response = ezusb_writememory(serial, CPUCS_REG, &reset_bit, 1, 0xa0); if (response < 0) dev_err(&serial->dev->dev, "%s- %d failed\n", -- cgit v0.10.2 From b6ea163b6d784e92266f33936d096f7dc83d7b22 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:07 -0700 Subject: USB: f81232.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 88c0b19..46aee85 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -68,8 +68,6 @@ static void f81232_read_int_callback(struct urb *urb) int status = urb->status; int retval; - dbg("%s (%d)", __func__, port->number); - switch (status) { case 0: /* success */ @@ -203,7 +201,6 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) if (tty) f81232_set_termios(tty, port, &tmp_termios); - dbg("%s - submitting interrupt urb", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting interrupt urb," -- cgit v0.10.2 From a09aa7dda46b2beb157d3a360898bdd77566d3e7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:10 -0700 Subject: USB: ftdi_sio.c: remove dbg() tracing calls MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Uwe Bonnes CC: Simon Arlott CC: Andrew Worsley CC: "Michał Wróbel" Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 02e7f2d..5691b8b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1285,8 +1285,6 @@ static int read_latency_timer(struct usb_serial_port *port) unsigned char *buf; int rv; - dbg("%s", __func__); - buf = kmalloc(1, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -1593,8 +1591,6 @@ static int create_sysfs_attrs(struct usb_serial_port *port) struct ftdi_private *priv = usb_get_serial_port_data(port); int retval = 0; - dbg("%s", __func__); - /* XXX I've no idea if the original SIO supports the event_char * sysfs parameter, so I'm playing it safe. */ if (priv->chip_type != SIO) { @@ -1619,8 +1615,6 @@ static void remove_sysfs_attrs(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - dbg("%s", __func__); - /* XXX see create_sysfs_attrs */ if (priv->chip_type != SIO) { device_remove_file(&port->dev, &dev_attr_event_char); @@ -1667,8 +1661,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial); - dbg("%s", __func__); - priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); if (!priv) { dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__, @@ -1704,8 +1696,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) /* Called from usbserial:serial_probe */ static void ftdi_USB_UIRT_setup(struct ftdi_private *priv) { - dbg("%s", __func__); - priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 77; priv->force_baud = 38400; @@ -1716,8 +1706,6 @@ static void ftdi_USB_UIRT_setup(struct ftdi_private *priv) static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv) { - dbg("%s", __func__); - priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 240; priv->force_baud = 38400; @@ -1767,8 +1755,6 @@ static int ftdi_jtag_probe(struct usb_serial *serial) struct usb_device *udev = serial->dev; struct usb_interface *interface = serial->interface; - dbg("%s", __func__); - if (interface == udev->actconfig->interface[0]) { dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); @@ -1782,8 +1768,6 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial) { struct usb_device *udev = serial->dev; - dbg("%s", __func__); - if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) || (udev->product && !strcmp(udev->product, "BeagleBone/XDS100"))) return ftdi_jtag_probe(serial); @@ -1800,8 +1784,6 @@ static int ftdi_stmclite_probe(struct usb_serial *serial) struct usb_device *udev = serial->dev; struct usb_interface *interface = serial->interface; - dbg("%s", __func__); - if (interface == udev->actconfig->interface[2]) return 0; @@ -1839,8 +1821,6 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - dbg("%s", __func__); - priv->dev_gone = true; wake_up_interruptible_all(&priv->delta_msr_wait); @@ -1858,8 +1838,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) struct ftdi_private *priv = usb_get_serial_port_data(port); int result; - dbg("%s", __func__); - /* No error checking for this (will get errors later anyway) */ /* See ftdi_sio.h for description of what is reset */ usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -1918,8 +1896,6 @@ static void ftdi_close(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - dbg("%s", __func__); - usb_serial_generic_close(port); kref_put(&priv->kref, ftdi_sio_priv_release); } @@ -1976,8 +1952,6 @@ static int ftdi_process_packet(struct tty_struct *tty, char flag; char *ch; - dbg("%s - port %d", __func__, port->number); - if (len < 2) { dbg("malformed packet"); return 0; @@ -2121,8 +2095,6 @@ static void ftdi_set_termios(struct tty_struct *tty, unsigned char vstop; unsigned char vstart; - dbg("%s", __func__); - /* Force baud rate if this device requires it, unless it is set to B0. */ if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) { @@ -2295,8 +2267,6 @@ static int ftdi_tiocmget(struct tty_struct *tty) int len; int ret; - dbg("%s TIOCMGET", __func__); - buf = kmalloc(2, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -2346,7 +2316,7 @@ static int ftdi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; - dbg("%s TIOCMSET", __func__); + return update_mctrl(port, set, clear); } @@ -2435,7 +2405,6 @@ static int __init ftdi_init(void) { int retval; - dbg("%s", __func__); if (vendor > 0 && product > 0) { /* Add user specified VID/PID to reserved element of table. */ int i; @@ -2454,8 +2423,6 @@ static int __init ftdi_init(void) static void __exit ftdi_exit(void) { - dbg("%s", __func__); - usb_serial_deregister_drivers(&ftdi_driver, serial_drivers); } -- cgit v0.10.2 From c0a56a2a4a1007b93c826cc3aa2e9a8d7c7e35dd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:12 -0700 Subject: USB: garmin_gps.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Johan Hovold CC: Andrew Morton CC: Rusty Russell CC: Mike Frysinger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index e8eb634..52c079d 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -345,8 +345,6 @@ static void pkt_clear(struct garmin_data *garmin_data_p) unsigned long flags; struct garmin_packet *result = NULL; - dbg("%s", __func__); - spin_lock_irqsave(&garmin_data_p->lock, flags); while (!list_empty(&garmin_data_p->pktlist)) { result = (struct garmin_packet *)garmin_data_p->pktlist.next; @@ -939,8 +937,6 @@ static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port) int status = 0; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->mode = initial_mode; garmin_data_p->count = 0; @@ -996,8 +992,6 @@ static void garmin_write_bulk_callback(struct urb *urb) struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - dbg("%s - port %d", __func__, port->number); - if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)) { if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { @@ -1027,9 +1021,6 @@ static int garmin_write_bulk(struct usb_serial_port *port, unsigned char *buffer; int status; - dbg("%s - port %d, state %d", __func__, port->number, - garmin_data_p->state); - spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags &= ~FLAGS_DROP_DATA; spin_unlock_irqrestore(&garmin_data_p->lock, flags); @@ -1224,8 +1215,6 @@ static void garmin_read_bulk_callback(struct urb *urb) int status = urb->status; int retval; - dbg("%s - port %d", __func__, port->number); - if (!serial) { dbg("%s - bad serial pointer, exiting", __func__); return; @@ -1384,7 +1373,6 @@ static void garmin_throttle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - dbg("%s - port %d", __func__, port->number); /* set flag, data received will be put into a queue for later processing */ spin_lock_irq(&garmin_data_p->lock); @@ -1399,7 +1387,6 @@ static void garmin_unthrottle(struct tty_struct *tty) struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); int status; - dbg("%s - port %d", __func__, port->number); spin_lock_irq(&garmin_data_p->lock); garmin_data_p->flags &= ~FLAGS_THROTTLED; spin_unlock_irq(&garmin_data_p->lock); @@ -1441,8 +1428,6 @@ static int garmin_attach(struct usb_serial *serial) struct usb_serial_port *port = serial->port[0]; struct garmin_data *garmin_data_p = NULL; - dbg("%s", __func__); - garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL); if (garmin_data_p == NULL) { dev_err(&port->dev, "%s - Out of memory\n", __func__); @@ -1471,8 +1456,6 @@ static void garmin_disconnect(struct usb_serial *serial) struct usb_serial_port *port = serial->port[0]; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - dbg("%s", __func__); - usb_kill_urb(port->interrupt_in_urb); del_timer_sync(&garmin_data_p->timer); } @@ -1483,8 +1466,6 @@ static void garmin_release(struct usb_serial *serial) struct usb_serial_port *port = serial->port[0]; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - dbg("%s", __func__); - kfree(garmin_data_p); } -- cgit v0.10.2 From de5789e22bcb4f7365b08c80bf3cdc3ab0a624d3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:12 -0700 Subject: USB: generic.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 7eee965..2cc39ba 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -117,8 +117,6 @@ int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port int result = 0; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - /* clear the throttle flags */ spin_lock_irqsave(&port->lock, flags); port->throttled = 0; @@ -139,8 +137,6 @@ static void generic_cleanup(struct usb_serial_port *port) unsigned long flags; int i; - dbg("%s - port %d", __func__, port->number); - if (serial->dev) { /* shutdown any bulk transfers that might be going on */ if (port->bulk_out_size) { @@ -160,7 +156,6 @@ static void generic_cleanup(struct usb_serial_port *port) void usb_serial_generic_close(struct usb_serial_port *port) { - dbg("%s - port %d", __func__, port->number); generic_cleanup(port); } EXPORT_SYMBOL_GPL(usb_serial_generic_close); @@ -248,8 +243,6 @@ int usb_serial_generic_write(struct tty_struct *tty, { int result; - dbg("%s - port %d", __func__, port->number); - /* only do something if we have a bulk out endpoint */ if (!port->bulk_out_size) return -ENODEV; @@ -272,8 +265,6 @@ int usb_serial_generic_write_room(struct tty_struct *tty) unsigned long flags; int room; - dbg("%s - port %d", __func__, port->number); - if (!port->bulk_out_size) return 0; @@ -291,8 +282,6 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) unsigned long flags; int chars; - dbg("%s - port %d", __func__, port->number); - if (!port->bulk_out_size) return 0; @@ -334,8 +323,6 @@ int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port, int res; int i; - dbg("%s - port %d", __func__, port->number); - for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) { res = usb_serial_generic_submit_read_urb(port, i, mem_flags); if (res) @@ -423,8 +410,6 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb) int status = urb->status; int i; - dbg("%s - port %d", __func__, port->number); - for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) if (port->write_urbs[i] == urb) break; @@ -453,8 +438,6 @@ void usb_serial_generic_throttle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - /* Set the throttle request flag. It will be picked up * by usb_serial_generic_read_bulk_callback(). */ spin_lock_irqsave(&port->lock, flags); @@ -468,8 +451,6 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; int was_throttled; - dbg("%s - port %d", __func__, port->number); - /* Clear the throttle flags */ spin_lock_irq(&port->lock); was_throttled = port->throttled; @@ -565,8 +546,6 @@ void usb_serial_generic_disconnect(struct usb_serial *serial) { int i; - dbg("%s", __func__); - /* stop reads and writes on all ports */ for (i = 0; i < serial->num_ports; ++i) generic_cleanup(serial->port[i]); @@ -575,5 +554,4 @@ EXPORT_SYMBOL_GPL(usb_serial_generic_disconnect); void usb_serial_generic_release(struct usb_serial *serial) { - dbg("%s", __func__); } -- cgit v0.10.2 From ef2b895b7533ba1392cb41bc8b3a30d2387e6197 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:15 -0700 Subject: USB: ipaq.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Rusty Russell CC: Johan Hovold CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 61e200f..65b689a 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -536,8 +536,6 @@ static int ipaq_open(struct tty_struct *tty, int result = 0; int retries = connect_retries; - dbg("%s - port %d", __func__, port->number); - msleep(1000*initial_wait); /* @@ -593,8 +591,6 @@ static int ipaq_calc_num_ports(struct usb_serial *serial) static int ipaq_startup(struct usb_serial *serial) { - dbg("%s", __func__); - /* Some of the devices in ipaq_id_table[] are composite, and we * shouldn't bind to all the interfaces. This test will rule out * some obviously invalid possibilities. -- cgit v0.10.2 From 1ae4c01ed5a8041ffa12b90dbe6e0465653d3a5a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:17 -0700 Subject: USB: ipw.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Rusty Russell CC: Oliver Neukum CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 76a0640..52c61d7 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -155,8 +155,6 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) u8 *buf_flow_init; int result; - dbg("%s", __func__); - buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL); if (!buf_flow_init) return -ENOMEM; -- cgit v0.10.2 From b97835556f635d117243bd54404d8190ce95d09b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:20 -0700 Subject: USB: ir-usb.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Rusty Russell CC: Johan Hovold CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 84965cd..ea09cf7 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -264,8 +264,6 @@ static int ir_open(struct tty_struct *tty, struct usb_serial_port *port) { int i; - dbg("%s - port %d", __func__, port->number); - for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET; @@ -322,15 +320,10 @@ static void ir_process_read_urb(struct urb *urb) static void ir_set_termios_callback(struct urb *urb) { - struct usb_serial_port *port = urb->context; - int status = urb->status; - - dbg("%s - port %d", __func__, port->number); - kfree(urb->transfer_buffer); - if (status) - dbg("%s - non-zero urb status: %d", __func__, status); + if (urb->status) + dbg("%s - non-zero urb status: %d", __func__, urb->status); } static void ir_set_termios(struct tty_struct *tty, @@ -342,8 +335,6 @@ static void ir_set_termios(struct tty_struct *tty, speed_t baud; int ir_baud; - dbg("%s - port %d", __func__, port->number); - baud = tty_get_baud_rate(tty); /* -- cgit v0.10.2 From 042df23a644cf1208cf62373f46a29f57e0d4693 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:22 -0700 Subject: USB: iuu_phoenix.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Rusty Russell CC: Johan Hovold CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index f2192d5..c40e5c2 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -135,8 +135,6 @@ static void iuu_release(struct usb_serial *serial) if (!port) return; - dbg("%s", __func__); - if (priv) { iuu_free_buf(priv); dbg("%s - I will free all", __func__); @@ -198,8 +196,6 @@ static void iuu_rxcmd(struct urb *urb) int result; int status = urb->status; - dbg("%s - enter", __func__); - if (status) { dbg("%s - status = %d", __func__, status); /* error stop all */ @@ -221,7 +217,6 @@ static int iuu_reset(struct usb_serial_port *port, u8 wt) struct iuu_private *priv = usb_get_serial_port_data(port); int result; char *buf_ptr = port->write_urb->transfer_buffer; - dbg("%s - enter", __func__); /* Prepare the reset sequence */ @@ -255,8 +250,6 @@ static void iuu_update_status_callback(struct urb *urb) u8 *st; int status = urb->status; - dbg("%s - enter", __func__); - if (status) { dbg("%s - status = %d", __func__, status); /* error stop all */ @@ -299,8 +292,6 @@ static int iuu_status(struct usb_serial_port *port) { int result; - dbg("%s - enter", __func__); - memset(port->write_urb->transfer_buffer, IUU_GET_STATE_REGISTER, 1); usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, @@ -318,8 +309,6 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) struct usb_serial *serial = port->serial; int actual = 0; - dbg("%s - enter", __func__); - /* send the data out the bulk port */ status = @@ -341,10 +330,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) struct usb_serial *serial = port->serial; int actual = 0; - dbg("%s - enter", __func__); - /* send the data out the bulk port */ - status = usb_bulk_msg(serial->dev, usb_rcvbulkpipe(serial->dev, @@ -367,8 +353,6 @@ static int iuu_led(struct usb_serial_port *port, unsigned int R, if (!buf) return -ENOMEM; - dbg("%s - enter", __func__); - buf[0] = IUU_SET_LED; buf[1] = R & 0xFF; buf[2] = (R >> 8) & 0xFF; @@ -460,8 +444,6 @@ static int iuu_clk(struct usb_serial_port *port, int dwFrq) unsigned int P2 = 0; int frq = (int)dwFrq; - dbg("%s - enter", __func__); - if (frq == 0) { priv->buf[Count++] = IUU_UART_WRITE_I2C; priv->buf[Count++] = FrqGenAdr << 1; @@ -590,8 +572,6 @@ static int iuu_uart_flush(struct usb_serial_port *port) u8 rxcmd = IUU_UART_RX; struct iuu_private *priv = usb_get_serial_port_data(port); - dbg("%s - enter", __func__); - if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0) return -EIO; @@ -630,8 +610,6 @@ static void read_buf_callback(struct urb *urb) struct tty_struct *tty; int status = urb->status; - dbg("%s - status = %d", __func__, status); - if (status) { if (status == -EPROTO) { /* reschedule needed */ @@ -659,7 +637,6 @@ static int iuu_bulk_write(struct usb_serial_port *port) int i; int buf_len; char *buf_ptr = port->write_urb->transfer_buffer; - dbg("%s - enter", __func__); spin_lock_irqsave(&priv->lock, flags); *buf_ptr++ = IUU_UART_ESC; @@ -691,7 +668,6 @@ static int iuu_bulk_write(struct usb_serial_port *port) static int iuu_read_buf(struct usb_serial_port *port, int len) { int result; - dbg("%s - enter", __func__); usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, @@ -713,8 +689,6 @@ static void iuu_uart_read_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; priv->poll++; - dbg("%s - enter", __func__); - if (status) { dbg("%s - status = %d", __func__, status); /* error stop all */ @@ -771,7 +745,6 @@ static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port, { struct iuu_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s - enter", __func__); if (count > 256) return -ENOMEM; @@ -792,8 +765,6 @@ static void read_rxcmd_callback(struct urb *urb) int result; int status = urb->status; - dbg("%s - status = %d", __func__, status); - if (status) { /* error stop all */ return; @@ -1015,8 +986,6 @@ static void iuu_close(struct usb_serial_port *port) if (!serial) return; - dbg("%s - port %d", __func__, port->number); - iuu_uart_off(port); if (serial->dev) { /* free writebuf */ @@ -1031,7 +1000,6 @@ static void iuu_close(struct usb_serial_port *port) static void iuu_init_termios(struct tty_struct *tty) { - dbg("%s - enter", __func__); *(tty->termios) = tty_std_termios; tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600 | TIOCM_CTS | CSTOPB | PARENB; @@ -1188,8 +1156,6 @@ static int iuu_vcc_set(struct usb_serial_port *port, unsigned int vcc) if (!buf) return -ENOMEM; - dbg("%s - enter", __func__); - buf[0] = IUU_SET_VCC; buf[1] = vcc & 0xFF; buf[2] = (vcc >> 8) & 0xFF; @@ -1250,15 +1216,11 @@ static DEVICE_ATTR(vcc_mode, S_IRUSR | S_IWUSR, show_vcc_mode, static int iuu_create_sysfs_attrs(struct usb_serial_port *port) { - dbg("%s", __func__); - return device_create_file(&port->dev, &dev_attr_vcc_mode); } static int iuu_remove_sysfs_attrs(struct usb_serial_port *port) { - dbg("%s", __func__); - device_remove_file(&port->dev, &dev_attr_vcc_mode); return 0; } -- cgit v0.10.2 From 41ea84d80c6045e35bcaaff88473ed772f3489df Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:22 -0700 Subject: USB: keyspan.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index a39ddd1..ec46053 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -137,8 +137,6 @@ static void keyspan_break_ctl(struct tty_struct *tty, int break_state) struct usb_serial_port *port = tty->driver_data; struct keyspan_port_private *p_priv; - dbg("%s", __func__); - p_priv = usb_get_serial_port_data(port); if (break_state == -1) @@ -158,8 +156,6 @@ static void keyspan_set_termios(struct tty_struct *tty, const struct keyspan_device_details *d_details; unsigned int cflag; - dbg("%s", __func__); - p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; cflag = tty->termios->c_cflag; @@ -306,8 +302,6 @@ static void usa26_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg("%s", __func__); - endpoint = usb_pipeendpoint(urb->pipe); if (status) { @@ -369,8 +363,6 @@ static void usa2x_outdat_callback(struct urb *urb) static void usa26_inack_callback(struct urb *urb) { - dbg("%s", __func__); - } static void usa26_outcont_callback(struct urb *urb) @@ -452,7 +444,6 @@ exit: ; static void usa26_glocont_callback(struct urb *urb) { - dbg("%s", __func__); } @@ -465,8 +456,6 @@ static void usa28_indat_callback(struct urb *urb) struct keyspan_port_private *p_priv; int status = urb->status; - dbg("%s", __func__); - port = urb->context; p_priv = usb_get_serial_port_data(port); data = urb->transfer_buffer; @@ -505,7 +494,6 @@ static void usa28_indat_callback(struct urb *urb) static void usa28_inack_callback(struct urb *urb) { - dbg("%s", __func__); } static void usa28_outcont_callback(struct urb *urb) @@ -585,7 +573,6 @@ exit: ; static void usa28_glocont_callback(struct urb *urb) { - dbg("%s", __func__); } @@ -596,8 +583,6 @@ static void usa49_glocont_callback(struct urb *urb) struct keyspan_port_private *p_priv; int i; - dbg("%s", __func__); - serial = urb->context; for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; @@ -625,8 +610,6 @@ static void usa49_instat_callback(struct urb *urb) int old_dcd_state; int status = urb->status; - dbg("%s", __func__); - serial = urb->context; if (status) { @@ -679,7 +662,6 @@ exit: ; static void usa49_inack_callback(struct urb *urb) { - dbg("%s", __func__); } static void usa49_indat_callback(struct urb *urb) @@ -691,8 +673,6 @@ static void usa49_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg("%s", __func__); - endpoint = usb_pipeendpoint(urb->pipe); if (status) { @@ -742,8 +722,6 @@ static void usa49wg_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg("%s", __func__); - serial = urb->context; if (status) { @@ -806,7 +784,6 @@ static void usa49wg_indat_callback(struct urb *urb) /* not used, usa-49 doesn't have per-port control endpoints */ static void usa49_outcont_callback(struct urb *urb) { - dbg("%s", __func__); } static void usa90_indat_callback(struct urb *urb) @@ -819,8 +796,6 @@ static void usa90_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg("%s", __func__); - endpoint = usb_pipeendpoint(urb->pipe); if (status) { @@ -957,8 +932,6 @@ static void usa67_instat_callback(struct urb *urb) int old_dcd_state; int status = urb->status; - dbg("%s", __func__); - serial = urb->context; if (status) { @@ -1010,8 +983,6 @@ static void usa67_glocont_callback(struct urb *urb) struct keyspan_port_private *p_priv; int i; - dbg("%s", __func__); - serial = urb->context; for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; @@ -1035,7 +1006,6 @@ static int keyspan_write_room(struct tty_struct *tty) int data_len; struct urb *this_urb; - dbg("%s", __func__); p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; @@ -1078,8 +1048,6 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; - dbg("%s - port%d.", __func__, port->number); - /* Set some sane defaults */ p_priv->rts_state = 1; p_priv->dtr_state = 1; @@ -1165,7 +1133,6 @@ static void keyspan_close(struct usb_serial_port *port) struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; - dbg("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -1438,8 +1405,6 @@ static void keyspan_setup_urbs(struct usb_serial *serial) struct callbacks *cback; int endp; - dbg("%s", __func__); - s_priv = usb_get_serial_data(serial); d_details = s_priv->device_details; @@ -1853,8 +1818,6 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, struct urb *this_urb; int device_port, err; - dbg("%s", __func__); - s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); d_details = s_priv->device_details; @@ -1980,8 +1943,6 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, struct urb *this_urb; int err, device_port; - dbg("%s", __func__); - s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); d_details = s_priv->device_details; @@ -2168,8 +2129,6 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, int err; u8 prescaler; - dbg("%s", __func__); - s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); d_details = s_priv->device_details; @@ -2300,8 +2259,6 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, struct urb *this_urb; int err, device_port; - dbg("%s", __func__); - s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); d_details = s_priv->device_details; @@ -2442,8 +2399,6 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) struct keyspan_serial_private *s_priv; const struct keyspan_device_details *d_details; - dbg("%s", __func__); - s_priv = usb_get_serial_data(serial); d_details = s_priv->device_details; @@ -2477,8 +2432,6 @@ static int keyspan_startup(struct usb_serial *serial) struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; - dbg("%s", __func__); - for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i) if (d_details->product_id == le16_to_cpu(serial->dev->descriptor.idProduct)) @@ -2538,8 +2491,6 @@ static void keyspan_disconnect(struct usb_serial *serial) struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; - dbg("%s", __func__); - s_priv = usb_get_serial_data(serial); /* Stop reading/writing urbs */ @@ -2579,8 +2530,6 @@ static void keyspan_release(struct usb_serial *serial) struct usb_serial_port *port; struct keyspan_serial_private *s_priv; - dbg("%s", __func__); - s_priv = usb_get_serial_data(serial); /* dbg("Freeing serial->private."); */ -- cgit v0.10.2 From 5542cf791c3f1c0e307d3ee330c72f1ca49ef4f5 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:23 -0700 Subject: USB: keyspan_pda.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 693bcdf..341ae50 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -131,7 +131,6 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work) struct usb_serial *serial = priv->serial; int result; - dbg(" request_unthrottle"); /* ask the device to tell us when the tx buffer becomes sufficiently empty */ result = usb_control_msg(serial->dev, @@ -226,7 +225,7 @@ static void keyspan_pda_rx_throttle(struct tty_struct *tty) send an XOFF, although it might make sense to foist that off upon the device too. */ struct usb_serial_port *port = tty->driver_data; - dbg("keyspan_pda_rx_throttle port %d", port->number); + usb_kill_urb(port->interrupt_in_urb); } @@ -235,7 +234,7 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; /* just restart the receive interrupt URB */ - dbg("keyspan_pda_rx_unthrottle port %d", port->number); + if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL)) dbg(" usb_submit_urb(read urb) failed"); } @@ -466,7 +465,6 @@ static int keyspan_pda_write(struct tty_struct *tty, select() or poll() too) until we receive that unthrottle interrupt. Block if we can't write anything at all, otherwise write as much as we can. */ - dbg("keyspan_pda_write(%d)", count); if (count == 0) { dbg(" write request of 0 bytes"); return 0; @@ -766,8 +764,6 @@ static int keyspan_pda_startup(struct usb_serial *serial) static void keyspan_pda_release(struct usb_serial *serial) { - dbg("%s", __func__); - kfree(usb_get_serial_port_data(serial->port[0])); } -- cgit v0.10.2 From b20430bcc0c5043ed4b107f688363e4f60ca7b92 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:23 -0700 Subject: USB: kl5kusb105.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 10f0540..02e1270 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -282,8 +282,6 @@ static void klsi_105_release(struct usb_serial *serial) { int i; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; ++i) kfree(usb_get_serial_port_data(serial->port[i])); } @@ -298,8 +296,6 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) struct klsi_105_port_settings *cfg; unsigned long flags; - dbg("%s port %d", __func__, port->number); - /* Do a defined restart: * Set up sane default baud rate and send the 'READ_ON' * vendor command. @@ -376,8 +372,6 @@ static void klsi_105_close(struct usb_serial_port *port) { int rc; - dbg("%s port %d", __func__, port->number); - mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) { /* send READ_OFF */ @@ -646,7 +640,6 @@ static int klsi_105_tiocmget(struct tty_struct *tty) unsigned long flags; int rc; unsigned long line_state; - dbg("%s - request, just guessing", __func__); rc = klsi_105_get_line_state(port, &line_state); if (rc < 0) { @@ -668,8 +661,6 @@ static int klsi_105_tiocmset(struct tty_struct *tty, { int retval = -EINVAL; - dbg("%s", __func__); - /* if this ever gets implemented, it should be done something like this: struct usb_serial *serial = port->serial; struct klsi_105_private *priv = usb_get_serial_port_data(port); -- cgit v0.10.2 From f65ee14fa83e0753472905a10091b07bfe3cccf2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:26 -0700 Subject: USB: kobil_sct.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Johan Hovold CC: Alan Stern CC: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 4a9a75e..7336e0e 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -193,7 +193,6 @@ static int kobil_startup(struct usb_serial *serial) static void kobil_release(struct usb_serial *serial) { int i; - dbg("%s - port %d", __func__, serial->port[0]->number); for (i = 0; i < serial->num_ports; ++i) kfree(usb_get_serial_port_data(serial->port[i])); @@ -217,7 +216,6 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) int transfer_buffer_length = 8; int write_urb_transfer_buffer_length = 8; - dbg("%s - port %d", __func__, port->number); priv = usb_get_serial_port_data(port); /* allocate memory for transfer buffer */ @@ -327,8 +325,6 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) static void kobil_close(struct usb_serial_port *port) { - dbg("%s - port %d", __func__, port->number); - /* FIXME: Add rts/dtr methods */ if (port->write_urb) { usb_poison_urb(port->write_urb); @@ -349,8 +345,6 @@ static void kobil_read_int_callback(struct urb *urb) int status = urb->status; /* char *dbg_data; */ - dbg("%s - port %d", __func__, port->number); - if (status) { dbg("%s - port %d Read int status not zero: %d", __func__, port->number, status); @@ -474,7 +468,6 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, static int kobil_write_room(struct tty_struct *tty) { - /* dbg("%s - port %d", __func__, port->number); */ /* FIXME */ return 8; } -- cgit v0.10.2 From b69919ca246fdfb6e6fec05c8e6d86c57a238ce4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:28 -0700 Subject: USB: mct_u232.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Johan Hovold CC: Rusty Russell CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 6edd261..4361364 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -427,8 +427,6 @@ static void mct_u232_release(struct usb_serial *serial) struct mct_u232_private *priv; int i; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; ++i) { /* My special items, the standard routines free my urbs */ priv = usb_get_serial_port_data(serial->port[i]); @@ -446,8 +444,6 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) unsigned char last_lcr; unsigned char last_msr; - dbg("%s port %d", __func__, port->number); - /* Compensate for a hardware bug: although the Sitecom U232-P25 * device reports a maximum output packet size of 32 bytes, * it seems to be able to accept only 16 bytes (and that's what @@ -528,8 +524,6 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) static void mct_u232_close(struct usb_serial_port *port) { - dbg("%s port %d", __func__, port->number); - if (port->serial->dev) { /* shutdown our urbs */ usb_kill_urb(port->write_urb); @@ -572,7 +566,6 @@ static void mct_u232_read_int_callback(struct urb *urb) return; } - dbg("%s - port %d", __func__, port->number); usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); @@ -733,8 +726,6 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) unsigned char lcr; unsigned long flags; - dbg("%sstate=%d", __func__, break_state); - spin_lock_irqsave(&priv->lock, flags); lcr = priv->last_lcr; @@ -753,8 +744,6 @@ static int mct_u232_tiocmget(struct tty_struct *tty) unsigned int control_state; unsigned long flags; - dbg("%s", __func__); - spin_lock_irqsave(&priv->lock, flags); control_state = priv->control_state; spin_unlock_irqrestore(&priv->lock, flags); @@ -771,8 +760,6 @@ static int mct_u232_tiocmset(struct tty_struct *tty, unsigned int control_state; unsigned long flags; - dbg("%s", __func__); - spin_lock_irqsave(&priv->lock, flags); control_state = priv->control_state; @@ -796,8 +783,6 @@ static void mct_u232_throttle(struct tty_struct *tty) struct mct_u232_private *priv = usb_get_serial_port_data(port); unsigned int control_state; - dbg("%s - port %d", __func__, port->number); - spin_lock_irq(&priv->lock); priv->rx_flags |= THROTTLED; if (C_CRTSCTS(tty)) { @@ -816,8 +801,6 @@ static void mct_u232_unthrottle(struct tty_struct *tty) struct mct_u232_private *priv = usb_get_serial_port_data(port); unsigned int control_state; - dbg("%s - port %d", __func__, port->number); - spin_lock_irq(&priv->lock); if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) { priv->rx_flags &= ~THROTTLED; -- cgit v0.10.2 From ca09907d96dcad09dc58eeb81215c67826deaaac Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:31 -0700 Subject: USB: mos7720.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Johan Hovold CC: Rusty Russell CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index bdce820..178b766 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -257,7 +257,6 @@ static void destroy_mos_parport(struct kref *kref) struct mos7715_parport *mos_parport = container_of(kref, struct mos7715_parport, ref_count); - dbg("%s called", __func__); kfree(mos_parport); } @@ -266,7 +265,7 @@ static void destroy_urbtracker(struct kref *kref) struct urbtracker *urbtrack = container_of(kref, struct urbtracker, ref_count); struct mos7715_parport *mos_parport = urbtrack->mos_parport; - dbg("%s called", __func__); + usb_free_urb(urbtrack->urb); kfree(urbtrack); kref_put(&mos_parport->ref_count, destroy_mos_parport); @@ -285,8 +284,6 @@ static void send_deferred_urbs(unsigned long _mos_parport) struct urbtracker *urbtrack; struct list_head *cursor, *next; - dbg("%s called", __func__); - /* if release function ran, game over */ if (unlikely(mos_parport->serial == NULL)) return; @@ -335,7 +332,7 @@ static void async_complete(struct urb *urb) { struct urbtracker *urbtrack = urb->context; int status = urb->status; - dbg("%s called", __func__); + if (unlikely(status)) dbg("%s - nonzero urb status received: %d", __func__, status); @@ -355,7 +352,6 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, struct usb_ctrlrequest setup; struct usb_serial *serial = mos_parport->serial; struct usb_device *usbdev = serial->dev; - dbg("%s called", __func__); /* create and initialize the control urb and containing urbtracker */ urbtrack = kmalloc(sizeof(struct urbtracker), GFP_ATOMIC); @@ -476,7 +472,7 @@ static inline void parport_epilogue(struct parport *pp) static void parport_mos7715_write_data(struct parport *pp, unsigned char d) { struct mos7715_parport *mos_parport = pp->private_data; - dbg("%s called: %2.2x", __func__, d); + if (parport_prologue(pp) < 0) return; mos7715_change_mode(mos_parport, SPP); @@ -488,7 +484,7 @@ static unsigned char parport_mos7715_read_data(struct parport *pp) { struct mos7715_parport *mos_parport = pp->private_data; unsigned char d; - dbg("%s called", __func__); + if (parport_prologue(pp) < 0) return 0; read_mos_reg(mos_parport->serial, dummy, DPR, &d); @@ -500,7 +496,7 @@ static void parport_mos7715_write_control(struct parport *pp, unsigned char d) { struct mos7715_parport *mos_parport = pp->private_data; __u8 data; - dbg("%s called: %2.2x", __func__, d); + if (parport_prologue(pp) < 0) return; data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0); @@ -513,7 +509,7 @@ static unsigned char parport_mos7715_read_control(struct parport *pp) { struct mos7715_parport *mos_parport = pp->private_data; __u8 dcr; - dbg("%s called", __func__); + spin_lock(&release_lock); mos_parport = pp->private_data; if (unlikely(mos_parport == NULL)) { @@ -531,7 +527,7 @@ static unsigned char parport_mos7715_frob_control(struct parport *pp, { struct mos7715_parport *mos_parport = pp->private_data; __u8 dcr; - dbg("%s called", __func__); + mask &= 0x0f; val &= 0x0f; if (parport_prologue(pp) < 0) @@ -547,7 +543,7 @@ static unsigned char parport_mos7715_read_status(struct parport *pp) { unsigned char status; struct mos7715_parport *mos_parport = pp->private_data; - dbg("%s called", __func__); + spin_lock(&release_lock); mos_parport = pp->private_data; if (unlikely(mos_parport == NULL)) { /* release called */ @@ -561,17 +557,16 @@ static unsigned char parport_mos7715_read_status(struct parport *pp) static void parport_mos7715_enable_irq(struct parport *pp) { - dbg("%s called", __func__); } + static void parport_mos7715_disable_irq(struct parport *pp) { - dbg("%s called", __func__); } static void parport_mos7715_data_forward(struct parport *pp) { struct mos7715_parport *mos_parport = pp->private_data; - dbg("%s called", __func__); + if (parport_prologue(pp) < 0) return; mos7715_change_mode(mos_parport, PS2); @@ -583,7 +578,7 @@ static void parport_mos7715_data_forward(struct parport *pp) static void parport_mos7715_data_reverse(struct parport *pp) { struct mos7715_parport *mos_parport = pp->private_data; - dbg("%s called", __func__); + if (parport_prologue(pp) < 0) return; mos7715_change_mode(mos_parport, PS2); @@ -595,7 +590,6 @@ static void parport_mos7715_data_reverse(struct parport *pp) static void parport_mos7715_init_state(struct pardevice *dev, struct parport_state *s) { - dbg("%s called", __func__); s->u.pc.ctr = DCR_INIT_VAL; s->u.pc.ecr = ECR_INIT_VAL; } @@ -605,7 +599,7 @@ static void parport_mos7715_save_state(struct parport *pp, struct parport_state *s) { struct mos7715_parport *mos_parport; - dbg("%s called", __func__); + spin_lock(&release_lock); mos_parport = pp->private_data; if (unlikely(mos_parport == NULL)) { /* release called */ @@ -622,7 +616,7 @@ static void parport_mos7715_restore_state(struct parport *pp, struct parport_state *s) { struct mos7715_parport *mos_parport; - dbg("%s called", __func__); + spin_lock(&release_lock); mos_parport = pp->private_data; if (unlikely(mos_parport == NULL)) { /* release called */ @@ -641,7 +635,7 @@ static size_t parport_mos7715_write_compat(struct parport *pp, int retval; struct mos7715_parport *mos_parport = pp->private_data; int actual_len; - dbg("%s called: %u chars", __func__, (unsigned int)len); + if (parport_prologue(pp) < 0) return 0; mos7715_change_mode(mos_parport, PPF); -- cgit v0.10.2 From 3363155b66c8d223845b928f87bc8aa482e5f91d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:33 -0700 Subject: USB: mos7840.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Johan Hovold CC: Donald Lee CC: Rusty Russell CC: Jiri Kosina Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index aaef523..d9086ee 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -667,8 +667,6 @@ static void mos7840_interrupt_callback(struct urb *urb) __u16 wval, wreg = 0; int status = urb->status; - dbg("%s", " : Entering"); - switch (status) { case 0: /* success */ @@ -842,12 +840,8 @@ static void mos7840_bulk_in_callback(struct urb *urb) return; } - dbg("%s", "Entering... "); - data = urb->transfer_buffer; - dbg("%s", "Entering ..........."); - if (urb->actual_length) { tty = tty_port_tty_get(&mos7840_port->port->port); if (tty) { @@ -919,8 +913,6 @@ static void mos7840_bulk_out_data_callback(struct urb *urb) return; } - dbg("%s", "Entering ........."); - tty = tty_port_tty_get(&mos7840_port->port->port); if (tty && mos7840_port->open) tty_wakeup(tty); @@ -962,8 +954,6 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) struct moschip_port *mos7840_port; struct moschip_port *port0; - dbg ("%s enter", __func__); - if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Port Paranoia failed"); return -ENODEV; @@ -1235,10 +1225,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) dbg("usb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p", serial, mos7840_port, port); - dbg ("%s leave", __func__); - return 0; - } /***************************************************************************** @@ -1259,18 +1246,14 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty) unsigned long flags; struct moschip_port *mos7840_port; - dbg("%s", " mos7840_chars_in_buffer:entering ..........."); - if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port"); return 0; } mos7840_port = mos7840_get_port_private(port); - if (mos7840_port == NULL) { - dbg("%s", "mos7840_break:leaving ..........."); + if (mos7840_port == NULL) return 0; - } spin_lock_irqsave(&mos7840_port->pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) @@ -1295,8 +1278,6 @@ static void mos7840_close(struct usb_serial_port *port) int j; __u16 Data; - dbg("%s", "mos7840_close:entering..."); - if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Port Paranoia failed"); return; @@ -1371,8 +1352,6 @@ static void mos7840_close(struct usb_serial_port *port) mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); mos7840_port->open = 0; - - dbg("%s", "Leaving ............"); } /************************************************************************ @@ -1427,9 +1406,6 @@ static void mos7840_break(struct tty_struct *tty, int break_state) struct usb_serial *serial; struct moschip_port *mos7840_port; - dbg("%s", "Entering ..........."); - dbg("mos7840_break: Start"); - if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Port Paranoia failed"); return; @@ -1479,8 +1455,6 @@ static int mos7840_write_room(struct tty_struct *tty) unsigned long flags; struct moschip_port *mos7840_port; - dbg("%s", " mos7840_write_room:entering ..........."); - if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port"); dbg("%s", " mos7840_write_room:leaving ..........."); @@ -1529,9 +1503,6 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, /* __u16 Data; */ const unsigned char *current_position = data; unsigned char *data1; - dbg("%s", "entering ..........."); - /* dbg("mos7840_write: mos7840_port->shadowLCR is %x", - mos7840_port->shadowLCR); */ #ifdef NOTMOS7840 Data = 0x00; @@ -1694,8 +1665,6 @@ static void mos7840_throttle(struct tty_struct *tty) return; } - dbg("%s", "Entering .........."); - /* if we are implementing XON/XOFF, send the stop character */ if (I_IXOFF(tty)) { unsigned char stop_char = STOP_CHAR(tty); @@ -1738,8 +1707,6 @@ static void mos7840_unthrottle(struct tty_struct *tty) return; } - dbg("%s", "Entering .........."); - /* if we are implementing XON/XOFF, send the start character */ if (I_IXOFF(tty)) { unsigned char start_char = START_CHAR(tty); @@ -1768,8 +1735,6 @@ static int mos7840_tiocmget(struct tty_struct *tty) int status; mos7840_port = mos7840_get_port_private(port); - dbg("%s - port %d", __func__, port->number); - if (mos7840_port == NULL) return -ENODEV; @@ -1796,8 +1761,6 @@ static int mos7840_tiocmset(struct tty_struct *tty, unsigned int mcr; int status; - dbg("%s - port %d", __func__, port->number); - mos7840_port = mos7840_get_port_private(port); if (mos7840_port == NULL) @@ -1838,7 +1801,6 @@ static int mos7840_tiocmset(struct tty_struct *tty, static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor, __u16 *clk_sel_val) { - dbg("%s - %d", __func__, baudRate); if (baudRate <= 115200) { @@ -1931,8 +1893,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, return -1; } - dbg("%s", "Entering .........."); - number = mos7840_port->port->number - mos7840_port->port->serial->minor; dbg("%s - port = %d, baud = %d", __func__, @@ -2058,8 +2018,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty, return; } - dbg("%s", "Entering .........."); - lData = LCR_BITS_8; lStop = LCR_STOP_1; lParity = LCR_PAR_NONE; @@ -2200,7 +2158,7 @@ static void mos7840_set_termios(struct tty_struct *tty, unsigned int cflag; struct usb_serial *serial; struct moschip_port *mos7840_port; - dbg("mos7840_set_termios: START"); + if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port"); return; @@ -2499,9 +2457,7 @@ static int mos7840_startup(struct usb_serial *serial) struct moschip_port *mos7840_port; struct usb_device *dev; int i, status; - __u16 Data; - dbg("%s", "mos7840_startup :Entering.........."); if (!serial) { dbg("%s", "Invalid Handler"); @@ -2510,9 +2466,6 @@ static int mos7840_startup(struct usb_serial *serial) dev = serial->dev; - dbg("%s", "Entering..."); - dbg ("mos7840_startup: serial = %p", serial); - /* we set up the pointers to the endpoints in the mos7840_open * * function, as the structures aren't created yet. */ @@ -2768,7 +2721,6 @@ static void mos7840_disconnect(struct usb_serial *serial) int i; unsigned long flags; struct moschip_port *mos7840_port; - dbg("%s", " disconnect :entering.........."); if (!serial) { dbg("%s", "Invalid Handler"); @@ -2790,9 +2742,6 @@ static void mos7840_disconnect(struct usb_serial *serial) usb_kill_urb(mos7840_port->control_urb); } } - - dbg("%s", "Thank u :: "); - } /**************************************************************************** @@ -2804,7 +2753,6 @@ static void mos7840_release(struct usb_serial *serial) { int i; struct moschip_port *mos7840_port; - dbg("%s", " release :entering.........."); if (!serial) { dbg("%s", "Invalid Handler"); @@ -2833,9 +2781,6 @@ static void mos7840_release(struct usb_serial *serial) kfree(mos7840_port); } } - - dbg("%s", "Thank u :: "); - } static struct usb_driver io_driver = { -- cgit v0.10.2 From 8cf38740e6b5affb9f914b829f466eb7104d2c67 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:35 -0700 Subject: USB: navman.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Rusty Russell CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 29ab6eb..31de00a 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -84,8 +84,6 @@ static int navman_open(struct tty_struct *tty, struct usb_serial_port *port) { int result = 0; - dbg("%s - port %d", __func__, port->number); - if (port->interrupt_in_urb) { dbg("%s - adding interrupt input for treo", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); @@ -99,16 +97,12 @@ static int navman_open(struct tty_struct *tty, struct usb_serial_port *port) static void navman_close(struct usb_serial_port *port) { - dbg("%s - port %d", __func__, port->number); - usb_kill_urb(port->interrupt_in_urb); } static int navman_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { - dbg("%s - port %d", __func__, port->number); - /* * This device can't write any data, only read from the device */ -- cgit v0.10.2 From 69d1d34a9bbadff9227ba94a4b3acca0c760880a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:38 -0700 Subject: USB: omninet.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Johan Hovold CC: Rusty Russell CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 88dc785..1b6d53f 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -144,8 +144,6 @@ static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port) struct usb_serial_port *wport; int result = 0; - dbg("%s - port %d", __func__, port->number); - wport = serial->port[1]; tty_port_tty_set(&wport->port, tty); @@ -160,7 +158,6 @@ static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port) static void omninet_close(struct usb_serial_port *port) { - dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->read_urb); } @@ -178,8 +175,6 @@ static void omninet_read_bulk_callback(struct urb *urb) int result; int i; - dbg("%s - port %d", __func__, port->number); - if (status) { dbg("%s - nonzero read bulk status received: %d", __func__, status); @@ -225,8 +220,6 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, int result; - dbg("%s - port %d", __func__, port->number); - if (count == 0) { dbg("%s - write request of 0 bytes", __func__); return 0; @@ -289,8 +282,6 @@ static void omninet_write_bulk_callback(struct urb *urb) struct usb_serial_port *port = urb->context; int status = urb->status; - dbg("%s - port %0x", __func__, port->number); - set_bit(0, &port->write_urbs_free); if (status) { dbg("%s - nonzero write bulk status received: %d", @@ -306,8 +297,6 @@ static void omninet_disconnect(struct usb_serial *serial) { struct usb_serial_port *wport = serial->port[1]; - dbg("%s", __func__); - usb_kill_urb(wport->write_urb); } @@ -316,8 +305,6 @@ static void omninet_release(struct usb_serial *serial) { struct usb_serial_port *port = serial->port[0]; - dbg("%s", __func__); - kfree(usb_get_serial_port_data(port)); } -- cgit v0.10.2 From 815fd56974a469d87acb0a65bda1259781fbfa28 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:40 -0700 Subject: USB: opticon.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Johan Hovold CC: Rusty Russell CC: Kuninori Morimoto CC: Julia Lawall Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index d31e997..858ee18 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -70,8 +70,6 @@ static void opticon_read_bulk_callback(struct urb *urb) int data_length; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - switch (status) { case 0: /* success */ @@ -179,8 +177,6 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port) unsigned long flags; int result = 0; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); priv->throttled = false; priv->actually_throttled = false; @@ -216,8 +212,6 @@ static void opticon_close(struct usb_serial_port *port) { struct opticon_private *priv = usb_get_serial_data(port->serial); - dbg("%s - port %d", __func__, port->number); - /* shutdown our urbs */ usb_kill_urb(priv->bulk_read_urb); } @@ -256,8 +250,6 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, int status; struct usb_ctrlrequest *dr; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT) { spin_unlock_irqrestore(&priv->lock, flags); @@ -338,8 +330,6 @@ static int opticon_write_room(struct tty_struct *tty) struct opticon_private *priv = usb_get_serial_data(port->serial); unsigned long flags; - dbg("%s - port %d", __func__, port->number); - /* * We really can take almost anything the user throws at us * but let's pick a nice big number to tell the tty @@ -362,7 +352,6 @@ static void opticon_throttle(struct tty_struct *tty) struct opticon_private *priv = usb_get_serial_data(port->serial); unsigned long flags; - dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); priv->throttled = true; spin_unlock_irqrestore(&priv->lock, flags); @@ -376,8 +365,6 @@ static void opticon_unthrottle(struct tty_struct *tty) unsigned long flags; int result, was_throttled; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); priv->throttled = false; was_throttled = priv->actually_throttled; @@ -400,8 +387,6 @@ static int opticon_tiocmget(struct tty_struct *tty) unsigned long flags; int result = 0; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); if (priv->rts) result |= TIOCM_RTS; @@ -560,8 +545,6 @@ static void opticon_disconnect(struct usb_serial *serial) { struct opticon_private *priv = usb_get_serial_data(serial); - dbg("%s", __func__); - usb_kill_urb(priv->bulk_read_urb); usb_free_urb(priv->bulk_read_urb); } @@ -570,8 +553,6 @@ static void opticon_release(struct usb_serial *serial) { struct opticon_private *priv = usb_get_serial_data(serial); - dbg("%s", __func__); - kfree(priv->bulk_in_buffer); kfree(priv); } -- cgit v0.10.2 From e79a8a4be4a741c3b4608dcdaaffb172f7b01877 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:41 -0700 Subject: USB: option.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Matthias Urlichs Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9ea5f4b..ae0b4aa 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1375,7 +1375,6 @@ static void option_instat_callback(struct urb *urb) struct usb_serial_port *port = urb->context; struct option_port_private *portdata = usb_get_serial_port_data(port); - dbg("%s", __func__); dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata); if (status == 0) { @@ -1437,7 +1436,6 @@ static int option_send_setup(struct usb_serial_port *port) struct option_port_private *portdata; int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber; int val = 0; - dbg("%s", __func__); if (is_blacklisted(ifNum, OPTION_BLACKLIST_SENDSETUP, (struct option_blacklist_info *) intfdata->private)) { -- cgit v0.10.2 From 77b3b30d18c1a4301441ca1be8bb404ac82408ae Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:43 -0700 Subject: USB: oti6858.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Johan Hovold CC: Rusty Russell CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 8bc8ea4..d4bce46 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -211,8 +211,6 @@ static void setup_line(struct work_struct *work) unsigned long flags; int result; - dbg("%s(port = %d)", __func__, port->number); - new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL); if (new_setup == NULL) { dev_err(&port->dev, "%s(): out of memory!\n", __func__); @@ -282,8 +280,6 @@ static void send_data(struct work_struct *work) unsigned long flags; u8 *allow; - dbg("%s(port = %d)", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); if (priv->flags.write_urb_in_use) { spin_unlock_irqrestore(&priv->lock, flags); @@ -379,8 +375,6 @@ static int oti6858_startup(struct usb_serial *serial) static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { - dbg("%s(port = %d, count = %d)", __func__, port->number, count); - if (!count) return count; @@ -395,8 +389,6 @@ static int oti6858_write_room(struct tty_struct *tty) int room = 0; unsigned long flags; - dbg("%s(port = %d)", __func__, port->number); - spin_lock_irqsave(&port->lock, flags); room = kfifo_avail(&port->write_fifo); spin_unlock_irqrestore(&port->lock, flags); @@ -410,8 +402,6 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty) int chars = 0; unsigned long flags; - dbg("%s(port = %d)", __func__, port->number); - spin_lock_irqsave(&port->lock, flags); chars = kfifo_len(&port->write_fifo); spin_unlock_irqrestore(&port->lock, flags); @@ -437,8 +427,6 @@ static void oti6858_set_termios(struct tty_struct *tty, __le16 divisor; int br; - dbg("%s(port = %d)", __func__, port->number); - if (!tty) { dbg("%s(): no tty structures", __func__); return; @@ -545,8 +533,6 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port) unsigned long flags; int result; - dbg("%s(port = %d)", __func__, port->number); - usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); @@ -602,8 +588,6 @@ static void oti6858_close(struct usb_serial_port *port) struct oti6858_private *priv = usb_get_serial_port_data(port); unsigned long flags; - dbg("%s(port = %d)", __func__, port->number); - spin_lock_irqsave(&port->lock, flags); /* clear out any remaining data in the buffer */ kfifo_reset_out(&port->write_fifo); @@ -660,8 +644,6 @@ static int oti6858_tiocmget(struct tty_struct *tty) unsigned pin_state; unsigned result = 0; - dbg("%s(port = %d)", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); pin_state = priv->status.pin_state & PIN_MASK; spin_unlock_irqrestore(&priv->lock, flags); @@ -744,8 +726,6 @@ static void oti6858_release(struct usb_serial *serial) { int i; - dbg("%s()", __func__); - for (i = 0; i < serial->num_ports; ++i) kfree(usb_get_serial_port_data(serial->port[i])); } @@ -757,9 +737,6 @@ static void oti6858_read_int_callback(struct urb *urb) int transient = 0, can_recv = 0, resubmit = 1; int status = urb->status; - dbg("%s(port = %d, status = %d)", - __func__, port->number, status); - switch (status) { case 0: /* success */ @@ -876,9 +853,6 @@ static void oti6858_read_bulk_callback(struct urb *urb) int status = urb->status; int result; - dbg("%s(port = %d, status = %d)", - __func__, port->number, status); - spin_lock_irqsave(&priv->lock, flags); priv->flags.read_urb_in_use = 0; spin_unlock_irqrestore(&priv->lock, flags); @@ -910,9 +884,6 @@ static void oti6858_write_bulk_callback(struct urb *urb) int status = urb->status; int result; - dbg("%s(port = %d, status = %d)", - __func__, port->number, status); - switch (status) { case 0: /* success */ -- cgit v0.10.2 From 3a3eec0c1f3825398f76fa37c8fcba58c770e0d7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:46 -0700 Subject: USB: qcserial.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Thomas Tuttle CC: Paul Gortmaker CC: Rusty Russell CC: Rigbert Hamisch Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 0206b10..201f281 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -131,7 +131,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) __u8 ifnum; bool is_gobi1k = id->driver_info ? true : false; - dbg("%s", __func__); dbg("Is Gobi 1000 = %d", is_gobi1k); nintf = serial->dev->actconfig->desc.bNumInterfaces; @@ -250,8 +249,6 @@ static void qc_release(struct usb_serial *serial) { struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); - dbg("%s", __func__); - /* Call usb_wwan release & free the private data allocated in qcprobe */ usb_wwan_release(serial); usb_set_serial_data(serial, NULL); -- cgit v0.10.2 From 64318a52956436bd0d2e910b0c38326b8cda2b8e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:48 -0700 Subject: USB: sierra.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Alan Stern CC: Rusty Russell CC: Johan Hovold CC: Anton Samokhvalov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 8c8bf80..f298dda 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -63,9 +63,7 @@ struct sierra_intf_private { static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) { - int result; - dev_dbg(&udev->dev, "%s\n", __func__); - result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), SWIMS_USB_REQUEST_SetPower, /* __u8 request */ USB_TYPE_VENDOR, /* __u8 request type */ swiState, /* __u16 value */ @@ -73,14 +71,11 @@ static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) NULL, /* void *data */ 0, /* __u16 size */ USB_CTRL_SET_TIMEOUT); /* int timeout */ - return result; } static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable) { - int result; - dev_dbg(&udev->dev, "%s\n", __func__); - result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), SWIMS_USB_REQUEST_SetNmea, /* __u8 request */ USB_TYPE_VENDOR, /* __u8 request type */ enable, /* __u16 value */ @@ -88,7 +83,6 @@ static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable) NULL, /* void *data */ 0, /* __u16 size */ USB_CTRL_SET_TIMEOUT); /* int timeout */ - return result; } static int sierra_calc_num_ports(struct usb_serial *serial) @@ -96,8 +90,6 @@ static int sierra_calc_num_ports(struct usb_serial *serial) int num_ports = 0; u8 ifnum, numendpoints; - dev_dbg(&serial->dev->dev, "%s\n", __func__); - ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber; numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints; @@ -150,7 +142,6 @@ static int sierra_calc_interface(struct usb_serial *serial) int interface; struct usb_interface *p_interface; struct usb_host_interface *p_host_interface; - dev_dbg(&serial->dev->dev, "%s\n", __func__); /* Get the interface structure pointer from the serial struct */ p_interface = serial->interface; @@ -175,9 +166,8 @@ static int sierra_probe(struct usb_serial *serial, u8 ifnum; udev = serial->dev; - dev_dbg(&udev->dev, "%s\n", __func__); - ifnum = sierra_calc_interface(serial); + /* * If this interface supports more than 1 alternate * select the 2nd one @@ -344,8 +334,6 @@ static int sierra_send_setup(struct usb_serial_port *port) int do_send = 0; int retval; - dev_dbg(&port->dev, "%s\n", __func__); - portdata = usb_get_serial_port_data(port); if (portdata->dtr_state) @@ -393,7 +381,6 @@ static int sierra_send_setup(struct usb_serial_port *port) static void sierra_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { - dev_dbg(&port->dev, "%s\n", __func__); tty_termios_copy_hw(tty->termios, old_termios); sierra_send_setup(port); } @@ -404,7 +391,6 @@ static int sierra_tiocmget(struct tty_struct *tty) unsigned int value; struct sierra_port_private *portdata; - dev_dbg(&port->dev, "%s\n", __func__); portdata = usb_get_serial_port_data(port); value = ((portdata->rts_state) ? TIOCM_RTS : 0) | @@ -441,8 +427,7 @@ static void sierra_release_urb(struct urb *urb) { struct usb_serial_port *port; if (urb) { - port = urb->context; - dev_dbg(&port->dev, "%s: %p\n", __func__, urb); + port = urb->context; kfree(urb->transfer_buffer); usb_free_urb(urb); } @@ -455,7 +440,6 @@ static void sierra_outdat_callback(struct urb *urb) struct sierra_intf_private *intfdata; int status = urb->status; - dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); intfdata = port->serial->private; /* free up the transfer buffer, as usb_free_urb() does not do this */ @@ -598,8 +582,6 @@ static void sierra_indat_callback(struct urb *urb) endpoint = usb_pipeendpoint(urb->pipe); port = urb->context; - dev_dbg(&port->dev, "%s: %p\n", __func__, urb); - if (status) { dev_dbg(&port->dev, "%s: nonzero status: %d on" " endpoint %02x\n", __func__, status, endpoint); @@ -697,8 +679,6 @@ static int sierra_write_room(struct tty_struct *tty) struct sierra_port_private *portdata = usb_get_serial_port_data(port); unsigned long flags; - dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); - /* try to give a good number back based on if we have any free urbs at * this point in time */ spin_lock_irqsave(&portdata->lock, flags); @@ -805,8 +785,6 @@ static void sierra_close(struct usb_serial_port *port) struct sierra_port_private *portdata; struct sierra_intf_private *intfdata = port->serial->private; - - dev_dbg(&port->dev, "%s\n", __func__); portdata = usb_get_serial_port_data(port); portdata->rts_state = 0; @@ -851,8 +829,6 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); - dev_dbg(&port->dev, "%s\n", __func__); - /* Set some sane defaults */ portdata->rts_state = 1; portdata->dtr_state = 1; @@ -915,8 +891,6 @@ static int sierra_startup(struct usb_serial *serial) int i; u8 ifnum; - dev_dbg(&serial->dev->dev, "%s\n", __func__); - /* Set Device mode to D0 */ sierra_set_power_state(serial->dev, 0x0000); @@ -977,8 +951,6 @@ static void sierra_release(struct usb_serial *serial) struct usb_serial_port *port; struct sierra_port_private *portdata; - dev_dbg(&serial->dev->dev, "%s\n", __func__); - for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; if (!port) -- cgit v0.10.2 From 76533636aa6b044b32de9747fcc614b1e75b2c85 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:51 -0700 Subject: USB: spcp8x5.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Rusty Russell CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index f06c9a8..91fea7b 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -454,8 +454,6 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) u8 status = 0x30; /* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */ - dbg("%s - port %d", __func__, port->number); - usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); -- cgit v0.10.2 From bb7a9c4a42995fe84af3e9c3a99f4c35d1567437 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:53 -0700 Subject: USB: ssu100.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Rusty Russell CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 3cdc8a5..cda513b 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -85,7 +85,6 @@ static void ssu100_release(struct usb_serial *serial) { struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port); - dbg("%s", __func__); kfree(priv); } @@ -171,8 +170,6 @@ static int ssu100_initdevice(struct usb_device *dev) u8 *data; int result = 0; - dbg("%s", __func__); - data = kzalloc(3, GFP_KERNEL); if (!data) return -ENOMEM; @@ -237,8 +234,6 @@ static void ssu100_set_termios(struct tty_struct *tty, u16 urb_value = 0; /* will hold the new flags */ int result; - dbg("%s", __func__); - if (cflag & PARENB) { if (cflag & PARODD) urb_value |= UART_LCR_PARITY; @@ -312,8 +307,6 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) int result; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - data = kzalloc(2, GFP_KERNEL); if (!data) return -ENOMEM; @@ -348,7 +341,6 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) static void ssu100_close(struct usb_serial_port *port) { - dbg("%s", __func__); usb_serial_generic_close(port); } @@ -467,8 +459,6 @@ static int ssu100_attach(struct usb_serial *serial) struct ssu100_port_private *priv; struct usb_serial_port *port = *serial->port; - dbg("%s", __func__); - priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__, @@ -490,8 +480,6 @@ static int ssu100_tiocmget(struct tty_struct *tty) u8 *d; int r; - dbg("%s\n", __func__); - d = kzalloc(2, GFP_KERNEL); if (!d) return -ENOMEM; @@ -522,7 +510,6 @@ static int ssu100_tiocmset(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; struct usb_device *dev = port->serial->dev; - dbg("%s\n", __func__); return update_mctrl(dev, set, clear); } @@ -530,8 +517,6 @@ static void ssu100_dtr_rts(struct usb_serial_port *port, int on) { struct usb_device *dev = port->serial->dev; - dbg("%s\n", __func__); - mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) { /* Disable flow control */ @@ -618,8 +603,6 @@ static int ssu100_process_packet(struct urb *urb, int i; char *ch; - dbg("%s - port %d", __func__, port->number); - if ((len >= 4) && (packet[0] == 0x1b) && (packet[1] == 0x1b) && ((packet[2] == 0x00) || (packet[2] == 0x01))) { @@ -656,8 +639,6 @@ static void ssu100_process_read_urb(struct urb *urb) struct tty_struct *tty; int count; - dbg("%s", __func__); - tty = tty_port_tty_get(&port->port); if (!tty) return; -- cgit v0.10.2 From b6b6df8a568678ca086e9ed558352d762b018c6c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:55 -0700 Subject: USB: symbolserial.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Rusty Russell CC: Johan Hovold CC: Kuninori Morimoto CC: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index 1a5be13..04e8812 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -54,8 +54,6 @@ static void symbol_int_callback(struct urb *urb) int result; int data_length; - dbg("%s - port %d", __func__, port->number); - switch (status) { case 0: /* success */ @@ -125,8 +123,6 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port) unsigned long flags; int result = 0; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); priv->throttled = false; priv->actually_throttled = false; @@ -150,8 +146,6 @@ static void symbol_close(struct usb_serial_port *port) { struct symbol_private *priv = usb_get_serial_data(port->serial); - dbg("%s - port %d", __func__, port->number); - /* shutdown our urbs */ usb_kill_urb(priv->int_urb); } @@ -161,7 +155,6 @@ static void symbol_throttle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; struct symbol_private *priv = usb_get_serial_data(port->serial); - dbg("%s - port %d", __func__, port->number); spin_lock_irq(&priv->lock); priv->throttled = true; spin_unlock_irq(&priv->lock); @@ -174,8 +167,6 @@ static void symbol_unthrottle(struct tty_struct *tty) int result; bool was_throttled; - dbg("%s - port %d", __func__, port->number); - spin_lock_irq(&priv->lock); priv->throttled = false; was_throttled = priv->actually_throttled; @@ -266,8 +257,6 @@ static void symbol_disconnect(struct usb_serial *serial) { struct symbol_private *priv = usb_get_serial_data(serial); - dbg("%s", __func__); - usb_kill_urb(priv->int_urb); usb_free_urb(priv->int_urb); } @@ -276,8 +265,6 @@ static void symbol_release(struct usb_serial *serial) { struct symbol_private *priv = usb_get_serial_data(serial); - dbg("%s", __func__); - kfree(priv->int_buffer); kfree(priv); } -- cgit v0.10.2 From 4a7ce90c0a8160af6480836636ad7eb67c8e07dc Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:44:58 -0700 Subject: USB: ti_usb_3410_5052.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Johan Hovold CC: Rusty Russell CC: Adhir Ramjiawan CC: Andrew Lunn Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 82116f4..925f5f4 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -465,8 +465,6 @@ static void ti_release(struct usb_serial *serial) struct ti_device *tdev = usb_get_serial_data(serial); struct ti_port *tport; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; ++i) { tport = usb_get_serial_port_data(serial->port[i]); if (tport) { @@ -491,8 +489,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) TI_PIPE_TIMEOUT_ENABLE | (TI_TRANSFER_TIMEOUT << 2)); - dbg("%s - port %d", __func__, port->number); - if (tport == NULL) return -ENODEV; @@ -633,8 +629,6 @@ static void ti_close(struct usb_serial_port *port) int status; int do_unlock; - dbg("%s - port %d", __func__, port->number); - tdev = usb_get_serial_data(port->serial); tport = usb_get_serial_port_data(port); if (tdev == NULL || tport == NULL) @@ -668,8 +662,6 @@ static void ti_close(struct usb_serial_port *port) } if (do_unlock) mutex_unlock(&tdev->td_open_close_lock); - - dbg("%s - exit", __func__); } @@ -678,8 +670,6 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, { struct ti_port *tport = usb_get_serial_port_data(port); - dbg("%s - port %d", __func__, port->number); - if (count == 0) { dbg("%s - write request of 0 bytes", __func__); return 0; @@ -703,8 +693,6 @@ static int ti_write_room(struct tty_struct *tty) int room = 0; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - if (tport == NULL) return 0; @@ -724,8 +712,6 @@ static int ti_chars_in_buffer(struct tty_struct *tty) int chars = 0; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - if (tport == NULL) return 0; @@ -743,8 +729,6 @@ static void ti_throttle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); - dbg("%s - port %d", __func__, port->number); - if (tport == NULL) return; @@ -760,8 +744,6 @@ static void ti_unthrottle(struct tty_struct *tty) struct ti_port *tport = usb_get_serial_port_data(port); int status; - dbg("%s - port %d", __func__, port->number); - if (tport == NULL) return; @@ -856,8 +838,6 @@ static void ti_set_termios(struct tty_struct *tty, int port_number = port->number - port->serial->minor; unsigned int mcr; - dbg("%s - port %d", __func__, port->number); - cflag = tty->termios->c_cflag; iflag = tty->termios->c_iflag; @@ -990,8 +970,6 @@ static int ti_tiocmget(struct tty_struct *tty) unsigned int mcr; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - if (tport == NULL) return -ENODEV; @@ -1022,8 +1000,6 @@ static int ti_tiocmset(struct tty_struct *tty, unsigned int mcr; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - if (tport == NULL) return -ENODEV; @@ -1086,8 +1062,6 @@ static void ti_interrupt_callback(struct urb *urb) int retval; __u8 msr; - dbg("%s", __func__); - switch (status) { case 0: break; @@ -1167,8 +1141,6 @@ static void ti_bulk_in_callback(struct urb *urb) int retval = 0; struct tty_struct *tty; - dbg("%s", __func__); - switch (status) { case 0: break; @@ -1235,8 +1207,6 @@ static void ti_bulk_out_callback(struct urb *urb) struct usb_serial_port *port = tport->tp_port; int status = urb->status; - dbg("%s - port %d", __func__, port->number); - tport->tp_write_urb_in_use = 0; switch (status) { @@ -1289,9 +1259,6 @@ static void ti_send(struct ti_port *tport) struct tty_struct *tty = tty_port_tty_get(&port->port); /* FIXME */ unsigned long flags; - - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&tport->tp_lock, flags); if (tport->tp_write_urb_in_use) @@ -1368,8 +1335,6 @@ static int ti_get_lsr(struct ti_port *tport) int port_number = port->number - port->serial->minor; struct ti_port_status *data; - dbg("%s - port %d", __func__, port->number); - size = sizeof(struct ti_port_status); data = kmalloc(size, GFP_KERNEL); if (!data) { @@ -1482,8 +1447,6 @@ static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush) struct usb_serial_port *port = tport->tp_port; wait_queue_t wait; - dbg("%s - port %d", __func__, port->number); - spin_lock_irq(&tport->tp_lock); /* wait for data to drain from the buffer */ @@ -1681,7 +1644,6 @@ static int ti_download_firmware(struct ti_device *tdev) const struct firmware *fw_p; char buf[32]; - dbg("%s\n", __func__); /* try ID specific firmware first, then try generic firmware */ sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor, dev->descriptor.idProduct); -- cgit v0.10.2 From d2bad7818c53a06a67b07d94f54e1a7e9bd0c09b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:45:00 -0700 Subject: USB: usb_wwan.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Rusty Russell CC: Alan Stern CC: Mauro Carvalho Chehab CC: Dan Carpenter Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 31ba989..f35971d 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -43,11 +43,8 @@ void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) { struct usb_serial *serial = port->serial; struct usb_wwan_port_private *portdata; - struct usb_wwan_intf_private *intfdata; - dbg("%s", __func__); - intfdata = port->serial->private; if (!intfdata->send_setup) @@ -69,8 +66,6 @@ void usb_wwan_set_termios(struct tty_struct *tty, { struct usb_wwan_intf_private *intfdata = port->serial->private; - dbg("%s", __func__); - /* Doesn't support option setting */ tty_termios_copy_hw(tty->termios, old_termios); @@ -286,8 +281,6 @@ static void usb_wwan_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg("%s: %p", __func__, urb); - endpoint = usb_pipeendpoint(urb->pipe); port = urb->context; @@ -328,8 +321,6 @@ static void usb_wwan_outdat_callback(struct urb *urb) struct usb_wwan_intf_private *intfdata; int i; - dbg("%s", __func__); - port = urb->context; intfdata = port->serial->private; @@ -403,8 +394,6 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); intfdata = serial->private; - dbg("%s", __func__); - /* Start reading from the IN endpoint */ for (i = 0; i < N_IN_URB; i++) { urb = portdata->in_urbs[i]; @@ -438,7 +427,6 @@ void usb_wwan_close(struct usb_serial_port *port) struct usb_wwan_port_private *portdata; struct usb_wwan_intf_private *intfdata = port->serial->private; - dbg("%s", __func__); portdata = usb_get_serial_port_data(port); if (serial->dev) { @@ -489,8 +477,6 @@ static void usb_wwan_setup_urbs(struct usb_serial *serial) struct usb_serial_port *port; struct usb_wwan_port_private *portdata; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); @@ -531,8 +517,6 @@ int usb_wwan_startup(struct usb_serial *serial) struct usb_wwan_port_private *portdata; u8 *buffer; - dbg("%s", __func__); - /* Now setup per port private data */ for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; @@ -600,8 +584,6 @@ static void stop_read_write_urbs(struct usb_serial *serial) void usb_wwan_disconnect(struct usb_serial *serial) { - dbg("%s", __func__); - stop_read_write_urbs(serial); } EXPORT_SYMBOL(usb_wwan_disconnect); @@ -612,8 +594,6 @@ void usb_wwan_release(struct usb_serial *serial) struct usb_serial_port *port; struct usb_wwan_port_private *portdata; - dbg("%s", __func__); - /* Now free them */ for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; @@ -646,8 +626,6 @@ int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) struct usb_wwan_intf_private *intfdata = serial->private; int b; - dbg("%s entered", __func__); - if (PMSG_IS_AUTO(message)) { spin_lock_irq(&intfdata->susp_lock); b = intfdata->in_flight; @@ -711,7 +689,6 @@ int usb_wwan_resume(struct usb_serial *serial) struct urb *urb; int err = 0; - dbg("%s entered", __func__); /* get the interrupt URBs resubmitted unconditionally */ for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; -- cgit v0.10.2 From 4db02fecb4c2f1ce67bfd3fbb014d7dcb10a115a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:45:01 -0700 Subject: USB: whiteheat.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Support Department Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index c141b47..d07794f 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -205,8 +205,6 @@ static int whiteheat_firmware_download(struct usb_serial *serial, const struct firmware *loader_fw = NULL, *firmware_fw = NULL; const struct ihex_binrec *record; - dbg("%s", __func__); - if (request_ihex_firmware(&firmware_fw, "whiteheat.fw", &serial->dev->dev)) { dev_err(&serial->dev->dev, @@ -437,8 +435,6 @@ static void whiteheat_release(struct usb_serial *serial) struct whiteheat_private *info; int i; - dbg("%s", __func__); - /* free up our private data for our command port */ command_port = serial->port[COMMAND_PORT]; kfree(usb_get_serial_port_data(command_port)); @@ -453,8 +449,6 @@ static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) { int retval; - dbg("%s - port %d", __func__, port->number); - retval = start_command_port(port->serial); if (retval) goto exit; @@ -487,15 +481,12 @@ static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) goto exit; } exit: - dbg("%s - exit, retval = %d", __func__, retval); return retval; } static void whiteheat_close(struct usb_serial_port *port) { - dbg("%s - port %d", __func__, port->number); - firm_report_tx_done(port); firm_close(port); @@ -510,8 +501,6 @@ static int whiteheat_tiocmget(struct tty_struct *tty) struct whiteheat_private *info = usb_get_serial_port_data(port); unsigned int modem_signals = 0; - dbg("%s - port %d", __func__, port->number); - firm_get_dtr_rts(port); if (info->mcr & UART_MCR_DTR) modem_signals |= TIOCM_DTR; @@ -527,8 +516,6 @@ static int whiteheat_tiocmset(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); - dbg("%s - port %d", __func__, port->number); - if (set & TIOCM_RTS) info->mcr |= UART_MCR_RTS; if (set & TIOCM_DTR) @@ -598,8 +585,6 @@ static void command_port_write_callback(struct urb *urb) { int status = urb->status; - dbg("%s", __func__); - if (status) { dbg("nonzero urb status: %d", status); return; @@ -615,8 +600,6 @@ static void command_port_read_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int result; - dbg("%s", __func__); - command_info = usb_get_serial_port_data(command_port); if (!command_info) { dbg("%s - command_info is NULL, exiting.", __func__); -- cgit v0.10.2 From 3ef35fafdc87b72851f7785dc5331a0f4eb1b3ce Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 4 May 2012 12:58:14 +0300 Subject: usb: dwc3: define DWC3_EP0_BOUNCE_SIZE to avoid sprinkling magic constants on the driver we define a constant to be used when allocating setup_buffer and ep0_bounce buffer. Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index ef28bd5..fbd0c8e 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -51,6 +51,7 @@ #include /* Global constants */ +#define DWC3_EP0_BOUNCE_SIZE 512 #define DWC3_ENDPOINTS_NUM 32 #define DWC3_XHCI_RESOURCES_NUM 2 diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 31ffc5c..1284439 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2319,7 +2319,7 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc) goto err1; } - dwc->setup_buf = kzalloc(512, GFP_KERNEL); + dwc->setup_buf = kzalloc(DWC3_EP0_BOUNCE_SIZE, GFP_KERNEL); if (!dwc->setup_buf) { dev_err(dwc->dev, "failed to allocate setup buffer\n"); ret = -ENOMEM; @@ -2327,7 +2327,8 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc) } dwc->ep0_bounce = dma_alloc_coherent(dwc->dev, - 512, &dwc->ep0_bounce_addr, GFP_KERNEL); + DWC3_EP0_BOUNCE_SIZE, &dwc->ep0_bounce_addr, + GFP_KERNEL); if (!dwc->ep0_bounce) { dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n"); ret = -ENOMEM; @@ -2414,8 +2415,8 @@ err5: dwc3_gadget_free_endpoints(dwc); err4: - dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce, - dwc->ep0_bounce_addr); + dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE, + dwc->ep0_bounce, dwc->ep0_bounce_addr); err3: kfree(dwc->setup_buf); @@ -2444,8 +2445,8 @@ void dwc3_gadget_exit(struct dwc3 *dwc) dwc3_gadget_free_endpoints(dwc); - dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce, - dwc->ep0_bounce_addr); + dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE, + dwc->ep0_bounce, dwc->ep0_bounce_addr); kfree(dwc->setup_buf); -- cgit v0.10.2 From 9ecb887522a0483fdde8db7ec41d72b8235f2fe8 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Mon, 12 Mar 2012 19:30:22 +0530 Subject: usb: musb: Add support for ti81xx platform TI81XX platform has two musb interfaces and uses CPPI4.1 DMA engine. It has builtin USB PHYs as AM35x. The current set of patches adds support for one instance and only in PIO mode. [ balbi@ti.com : make it compile and solve a "may be used uninitialized" warning ] Signed-off-by: Ajay Kumar Gupta Signed-off-by: Ravi Babu Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index f70cab3..126c220 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -8,6 +8,7 @@ config USB_MUSB_HDRC tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' depends on USB && USB_GADGET select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN) + select NOP_USB_XCEIV if SOC_OMAPTI81XX select TWL4030_USB if MACH_OMAP_3430SDP select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS @@ -54,6 +55,10 @@ config USB_MUSB_AM35X tristate "AM35x" depends on ARCH_OMAP +config USB_MUSB_DSPS + tristate "TI DSPS platforms" + depends on SOC_OMAPTI81XX + config USB_MUSB_BLACKFIN tristate "Blackfin" depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523) @@ -70,7 +75,8 @@ choice default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI default USB_TUSB_OMAP_DMA if USB_MUSB_TUSB6010 - default MUSB_PIO_ONLY if USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X + default MUSB_PIO_ONLY if USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X \ + || USB_MUSB_DSPS help Unfortunately, only one option can be enabled here. Ideally one should be able to build all these drivers into one kernel to diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile index 88bfb9d..3b85871 100644 --- a/drivers/usb/musb/Makefile +++ b/drivers/usb/musb/Makefile @@ -13,6 +13,7 @@ musb_hdrc-$(CONFIG_DEBUG_FS) += musb_debugfs.o # Hardware Glue Layer obj-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o obj-$(CONFIG_USB_MUSB_AM35X) += am35x.o +obj-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o obj-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 66aaccf..db3dff8 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1034,7 +1034,9 @@ static void musb_shutdown(struct platform_device *pdev) || defined(CONFIG_USB_MUSB_OMAP2PLUS) \ || defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE) \ || defined(CONFIG_USB_MUSB_AM35X) \ - || defined(CONFIG_USB_MUSB_AM35X_MODULE) + || defined(CONFIG_USB_MUSB_AM35X_MODULE) \ + || defined(CONFIG_USB_MUSB_DSPS) \ + || defined(CONFIG_USB_MUSB_DSPS_MODULE) static ushort __devinitdata fifo_mode = 4; #elif defined(CONFIG_USB_MUSB_UX500) \ || defined(CONFIG_USB_MUSB_UX500_MODULE) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c new file mode 100644 index 0000000..23db42d --- /dev/null +++ b/drivers/usb/musb/musb_dsps.c @@ -0,0 +1,711 @@ +/* + * Texas Instruments DSPS platforms "glue layer" + * + * Copyright (C) 2012, by Texas Instruments + * + * Based on the am35x "glue layer" code. + * + * This file is part of the Inventra Controller Driver for Linux. + * + * The Inventra Controller Driver for Linux is free software; you + * can redistribute it and/or modify it under the terms of the GNU + * General Public License version 2 as published by the Free Software + * Foundation. + * + * The Inventra Controller Driver for Linux is distributed in + * the hope that it will be useful, but WITHOUT ANY WARRANTY; + * without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public + * License for more details. + * + * You should have received a copy of the GNU General Public License + * along with The Inventra Controller Driver for Linux ; if not, + * write to the Free Software Foundation, Inc., 59 Temple Place, + * Suite 330, Boston, MA 02111-1307 USA + * + * musb_dsps.c will be a common file for all the TI DSPS platforms + * such as dm64x, dm36x, dm35x, da8x, am35x and ti81x. + * For now only ti81x is using this and in future davinci.c, am35x.c + * da8xx.c would be merged to this file after testing. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include "musb_core.h" + +/** + * avoid using musb_readx()/musb_writex() as glue layer should not be + * dependent on musb core layer symbols. + */ +static inline u8 dsps_readb(const void __iomem *addr, unsigned offset) + { return __raw_readb(addr + offset); } + +static inline u32 dsps_readl(const void __iomem *addr, unsigned offset) + { return __raw_readl(addr + offset); } + +static inline void dsps_writeb(void __iomem *addr, unsigned offset, u8 data) + { __raw_writeb(data, addr + offset); } + +static inline void dsps_writel(void __iomem *addr, unsigned offset, u32 data) + { __raw_writel(data, addr + offset); } + +/** + * DSPS musb wrapper register offset. + * FIXME: This should be expanded to have all the wrapper registers from TI DSPS + * musb ips. + */ +struct dsps_musb_wrapper { + u16 revision; + u16 control; + u16 status; + u16 eoi; + u16 epintr_set; + u16 epintr_clear; + u16 epintr_status; + u16 coreintr_set; + u16 coreintr_clear; + u16 coreintr_status; + u16 phy_utmi; + u16 mode; + + /* bit positions for control */ + unsigned reset:5; + + /* bit positions for interrupt */ + unsigned usb_shift:5; + u32 usb_mask; + u32 usb_bitmap; + unsigned drvvbus:5; + + unsigned txep_shift:5; + u32 txep_mask; + u32 txep_bitmap; + + unsigned rxep_shift:5; + u32 rxep_mask; + u32 rxep_bitmap; + + /* bit positions for phy_utmi */ + unsigned otg_disable:5; + + /* bit positions for mode */ + unsigned iddig:5; + /* miscellaneous stuff */ + u32 musb_core_offset; + u8 poll_seconds; +}; + +/** + * DSPS glue structure. + */ +struct dsps_glue { + struct device *dev; + struct platform_device *musb; /* child musb pdev */ + const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */ + struct timer_list timer; /* otg_workaround timer */ +}; + +/** + * dsps_musb_enable - enable interrupts + */ +static void dsps_musb_enable(struct musb *musb) +{ + struct device *dev = musb->controller; + struct platform_device *pdev = to_platform_device(dev->parent); + struct dsps_glue *glue = platform_get_drvdata(pdev); + const struct dsps_musb_wrapper *wrp = glue->wrp; + void __iomem *reg_base = musb->ctrl_base; + u32 epmask, coremask; + + /* Workaround: setup IRQs through both register sets. */ + epmask = ((musb->epmask & wrp->txep_mask) << wrp->txep_shift) | + ((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift); + coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF); + + dsps_writel(reg_base, wrp->epintr_set, epmask); + dsps_writel(reg_base, wrp->coreintr_set, coremask); + /* Force the DRVVBUS IRQ so we can start polling for ID change. */ + if (is_otg_enabled(musb)) + dsps_writel(reg_base, wrp->coreintr_set, + (1 << wrp->drvvbus) << wrp->usb_shift); +} + +/** + * dsps_musb_disable - disable HDRC and flush interrupts + */ +static void dsps_musb_disable(struct musb *musb) +{ + struct device *dev = musb->controller; + struct platform_device *pdev = to_platform_device(dev->parent); + struct dsps_glue *glue = platform_get_drvdata(pdev); + const struct dsps_musb_wrapper *wrp = glue->wrp; + void __iomem *reg_base = musb->ctrl_base; + + dsps_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap); + dsps_writel(reg_base, wrp->epintr_clear, + wrp->txep_bitmap | wrp->rxep_bitmap); + dsps_writeb(musb->mregs, MUSB_DEVCTL, 0); + dsps_writel(reg_base, wrp->eoi, 0); +} + +static void otg_timer(unsigned long _musb) +{ + struct musb *musb = (void *)_musb; + void __iomem *mregs = musb->mregs; + struct device *dev = musb->controller; + struct platform_device *pdev = to_platform_device(dev->parent); + struct dsps_glue *glue = platform_get_drvdata(pdev); + const struct dsps_musb_wrapper *wrp = glue->wrp; + u8 devctl; + unsigned long flags; + + /* + * We poll because DSPS IP's won't expose several OTG-critical + * status change events (from the transceiver) otherwise. + */ + devctl = dsps_readb(mregs, MUSB_DEVCTL); + dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl, + otg_state_string(musb->xceiv->state)); + + spin_lock_irqsave(&musb->lock, flags); + switch (musb->xceiv->state) { + case OTG_STATE_A_WAIT_BCON: + devctl &= ~MUSB_DEVCTL_SESSION; + dsps_writeb(musb->mregs, MUSB_DEVCTL, devctl); + + devctl = dsps_readb(musb->mregs, MUSB_DEVCTL); + if (devctl & MUSB_DEVCTL_BDEVICE) { + musb->xceiv->state = OTG_STATE_B_IDLE; + MUSB_DEV_MODE(musb); + } else { + musb->xceiv->state = OTG_STATE_A_IDLE; + MUSB_HST_MODE(musb); + } + break; + case OTG_STATE_A_WAIT_VFALL: + musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + dsps_writel(musb->ctrl_base, wrp->coreintr_set, + MUSB_INTR_VBUSERROR << wrp->usb_shift); + break; + case OTG_STATE_B_IDLE: + if (!is_peripheral_enabled(musb)) + break; + + devctl = dsps_readb(mregs, MUSB_DEVCTL); + if (devctl & MUSB_DEVCTL_BDEVICE) + mod_timer(&glue->timer, + jiffies + wrp->poll_seconds * HZ); + else + musb->xceiv->state = OTG_STATE_A_IDLE; + break; + default: + break; + } + spin_unlock_irqrestore(&musb->lock, flags); +} + +static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) +{ + struct device *dev = musb->controller; + struct platform_device *pdev = to_platform_device(dev->parent); + struct dsps_glue *glue = platform_get_drvdata(pdev); + static unsigned long last_timer; + + if (!is_otg_enabled(musb)) + return; + + if (timeout == 0) + timeout = jiffies + msecs_to_jiffies(3); + + /* Never idle if active, or when VBUS timeout is not set as host */ + if (musb->is_active || (musb->a_wait_bcon == 0 && + musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { + dev_dbg(musb->controller, "%s active, deleting timer\n", + otg_state_string(musb->xceiv->state)); + del_timer(&glue->timer); + last_timer = jiffies; + return; + } + + if (time_after(last_timer, timeout) && timer_pending(&glue->timer)) { + dev_dbg(musb->controller, + "Longer idle timer already pending, ignoring...\n"); + return; + } + last_timer = timeout; + + dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", + otg_state_string(musb->xceiv->state), + jiffies_to_msecs(timeout - jiffies)); + mod_timer(&glue->timer, timeout); +} + +static irqreturn_t dsps_interrupt(int irq, void *hci) +{ + struct musb *musb = hci; + void __iomem *reg_base = musb->ctrl_base; + struct device *dev = musb->controller; + struct platform_device *pdev = to_platform_device(dev->parent); + struct dsps_glue *glue = platform_get_drvdata(pdev); + const struct dsps_musb_wrapper *wrp = glue->wrp; + unsigned long flags; + irqreturn_t ret = IRQ_NONE; + u32 epintr, usbintr; + + spin_lock_irqsave(&musb->lock, flags); + + /* Get endpoint interrupts */ + epintr = dsps_readl(reg_base, wrp->epintr_status); + musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift; + musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift; + + if (epintr) + dsps_writel(reg_base, wrp->epintr_status, epintr); + + /* Get usb core interrupts */ + usbintr = dsps_readl(reg_base, wrp->coreintr_status); + if (!usbintr && !epintr) + goto eoi; + + musb->int_usb = (usbintr & wrp->usb_bitmap) >> wrp->usb_shift; + if (usbintr) + dsps_writel(reg_base, wrp->coreintr_status, usbintr); + + dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n", + usbintr, epintr); + /* + * DRVVBUS IRQs are the only proxy we have (a very poor one!) for + * DSPS IP's missing ID change IRQ. We need an ID change IRQ to + * switch appropriately between halves of the OTG state machine. + * Managing DEVCTL.SESSION per Mentor docs requires that we know its + * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set. + * Also, DRVVBUS pulses for SRP (but not at 5V) ... + */ + if ((usbintr & MUSB_INTR_BABBLE) && is_host_enabled(musb)) + pr_info("CAUTION: musb: Babble Interrupt Occured\n"); + + if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) { + int drvvbus = dsps_readl(reg_base, wrp->status); + void __iomem *mregs = musb->mregs; + u8 devctl = dsps_readb(mregs, MUSB_DEVCTL); + int err; + + err = is_host_enabled(musb) && (musb->int_usb & + MUSB_INTR_VBUSERROR); + if (err) { + /* + * The Mentor core doesn't debounce VBUS as needed + * to cope with device connect current spikes. This + * means it's not uncommon for bus-powered devices + * to get VBUS errors during enumeration. + * + * This is a workaround, but newer RTL from Mentor + * seems to allow a better one: "re"-starting sessions + * without waiting for VBUS to stop registering in + * devctl. + */ + musb->int_usb &= ~MUSB_INTR_VBUSERROR; + musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; + mod_timer(&glue->timer, + jiffies + wrp->poll_seconds * HZ); + WARNING("VBUS error workaround (delay coming)\n"); + } else if (is_host_enabled(musb) && drvvbus) { + musb->is_active = 1; + MUSB_HST_MODE(musb); + musb->xceiv->otg->default_a = 1; + musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + del_timer(&glue->timer); + } else { + musb->is_active = 0; + MUSB_DEV_MODE(musb); + musb->xceiv->otg->default_a = 0; + musb->xceiv->state = OTG_STATE_B_IDLE; + } + + /* NOTE: this must complete power-on within 100 ms. */ + dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", + drvvbus ? "on" : "off", + otg_state_string(musb->xceiv->state), + err ? " ERROR" : "", + devctl); + ret = IRQ_HANDLED; + } + + if (musb->int_tx || musb->int_rx || musb->int_usb) + ret |= musb_interrupt(musb); + + eoi: + /* EOI needs to be written for the IRQ to be re-asserted. */ + if (ret == IRQ_HANDLED || epintr || usbintr) + dsps_writel(reg_base, wrp->eoi, 1); + + /* Poll for ID change */ + if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE) + mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); + + spin_unlock_irqrestore(&musb->lock, flags); + + return ret; +} + +static int dsps_musb_init(struct musb *musb) +{ + struct device *dev = musb->controller; + struct musb_hdrc_platform_data *plat = dev->platform_data; + struct platform_device *pdev = to_platform_device(dev->parent); + struct dsps_glue *glue = platform_get_drvdata(pdev); + const struct dsps_musb_wrapper *wrp = glue->wrp; + struct omap_musb_board_data *data = plat->board_data; + void __iomem *reg_base = musb->ctrl_base; + u32 rev, val; + int status; + + /* mentor core register starts at offset of 0x400 from musb base */ + musb->mregs += wrp->musb_core_offset; + + /* NOP driver needs change if supporting dual instance */ + usb_nop_xceiv_register(); + musb->xceiv = usb_get_transceiver(); + if (!musb->xceiv) + return -ENODEV; + + /* Returns zero if e.g. not clocked */ + rev = dsps_readl(reg_base, wrp->revision); + if (!rev) { + status = -ENODEV; + goto err0; + } + + if (is_host_enabled(musb)) + setup_timer(&glue->timer, otg_timer, (unsigned long) musb); + + /* Reset the musb */ + dsps_writel(reg_base, wrp->control, (1 << wrp->reset)); + + /* Start the on-chip PHY and its PLL. */ + if (data->set_phy_power) + data->set_phy_power(1); + + musb->isr = dsps_interrupt; + + /* reset the otgdisable bit, needed for host mode to work */ + val = dsps_readl(reg_base, wrp->phy_utmi); + val &= ~(1 << wrp->otg_disable); + dsps_writel(musb->ctrl_base, wrp->phy_utmi, val); + + /* clear level interrupt */ + dsps_writel(reg_base, wrp->eoi, 0); + + return 0; +err0: + usb_put_transceiver(musb->xceiv); + usb_nop_xceiv_unregister(); + return status; +} + +static int dsps_musb_exit(struct musb *musb) +{ + struct device *dev = musb->controller; + struct musb_hdrc_platform_data *plat = dev->platform_data; + struct omap_musb_board_data *data = plat->board_data; + struct platform_device *pdev = to_platform_device(dev->parent); + struct dsps_glue *glue = platform_get_drvdata(pdev); + + if (is_host_enabled(musb)) + del_timer_sync(&glue->timer); + + /* Shutdown the on-chip PHY and its PLL. */ + if (data->set_phy_power) + data->set_phy_power(0); + + /* NOP driver needs change if supporting dual instance */ + usb_put_transceiver(musb->xceiv); + usb_nop_xceiv_unregister(); + + return 0; +} + +static struct musb_platform_ops dsps_ops = { + .init = dsps_musb_init, + .exit = dsps_musb_exit, + + .enable = dsps_musb_enable, + .disable = dsps_musb_disable, + + .try_idle = dsps_musb_try_idle, +}; + +static u64 musb_dmamask = DMA_BIT_MASK(32); + +static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) +{ + struct device *dev = glue->dev; + struct platform_device *pdev = to_platform_device(dev); + struct musb_hdrc_platform_data *pdata = dev->platform_data; + struct platform_device *musb; + struct resource *res; + struct resource resources[2]; + char res_name[10]; + int ret; + + /* get memory resource */ + sprintf(res_name, "musb%d", id); + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name); + if (!res) { + dev_err(dev, "%s get mem resource failed\n", res_name); + ret = -ENODEV; + goto err0; + } + res->parent = NULL; + resources[0] = *res; + + /* get irq resource */ + sprintf(res_name, "musb%d-irq", id); + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name); + if (!res) { + dev_err(dev, "%s get irq resource failed\n", res_name); + ret = -ENODEV; + goto err0; + } + strcpy((u8 *)res->name, "mc"); + res->parent = NULL; + resources[1] = *res; + + /* allocate the child platform device */ + musb = platform_device_alloc("musb-hdrc", -1); + if (!musb) { + dev_err(dev, "failed to allocate musb device\n"); + ret = -ENOMEM; + goto err0; + } + + musb->dev.parent = dev; + musb->dev.dma_mask = &musb_dmamask; + musb->dev.coherent_dma_mask = musb_dmamask; + + glue->musb = musb; + + pdata->platform_ops = &dsps_ops; + + ret = platform_device_add_resources(musb, resources, 2); + if (ret) { + dev_err(dev, "failed to add resources\n"); + goto err1; + } + + ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); + if (ret) { + dev_err(dev, "failed to add platform_data\n"); + goto err1; + } + + ret = platform_device_add(musb); + if (ret) { + dev_err(dev, "failed to register musb device\n"); + goto err1; + } + + return 0; + +err1: + platform_device_put(musb); +err0: + return ret; +} + +static void __devexit dsps_delete_musb_pdev(struct dsps_glue *glue) +{ + platform_device_del(glue->musb); + platform_device_put(glue->musb); +} + +static int __devinit dsps_probe(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + const struct dsps_musb_wrapper *wrp = + (struct dsps_musb_wrapper *)id->driver_data; + struct dsps_glue *glue; + struct resource *iomem; + int ret; + + /* allocate glue */ + glue = kzalloc(sizeof(*glue), GFP_KERNEL); + if (!glue) { + dev_err(&pdev->dev, "unable to allocate glue memory\n"); + ret = -ENOMEM; + goto err0; + } + + /* get memory resource */ + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iomem) { + dev_err(&pdev->dev, "failed to get usbss mem resourse\n"); + ret = -ENODEV; + goto err1; + } + + glue->dev = &pdev->dev; + + glue->wrp = kmemdup(wrp, sizeof(*wrp), GFP_KERNEL); + if (!glue->wrp) { + dev_err(&pdev->dev, "failed to duplicate wrapper struct memory\n"); + ret = -ENOMEM; + goto err1; + } + platform_set_drvdata(pdev, glue); + + /* create the child platform device for first instances of musb */ + ret = dsps_create_musb_pdev(glue, 0); + if (ret != 0) { + dev_err(&pdev->dev, "failed to create child pdev\n"); + goto err2; + } + + /* enable the usbss clocks */ + pm_runtime_enable(&pdev->dev); + + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) { + dev_err(&pdev->dev, "pm_runtime_get_sync FAILED"); + goto err3; + } + + return 0; + +err3: + pm_runtime_disable(&pdev->dev); +err2: + kfree(glue->wrp); +err1: + kfree(glue); +err0: + return ret; +} +static int __devexit dsps_remove(struct platform_device *pdev) +{ + struct dsps_glue *glue = platform_get_drvdata(pdev); + + /* delete the child platform device */ + dsps_delete_musb_pdev(glue); + + /* disable usbss clocks */ + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + kfree(glue->wrp); + kfree(glue); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int dsps_suspend(struct device *dev) +{ + struct musb_hdrc_platform_data *plat = dev->platform_data; + struct omap_musb_board_data *data = plat->board_data; + + /* Shutdown the on-chip PHY and its PLL. */ + if (data->set_phy_power) + data->set_phy_power(0); + + return 0; +} + +static int dsps_resume(struct device *dev) +{ + struct musb_hdrc_platform_data *plat = dev->platform_data; + struct omap_musb_board_data *data = plat->board_data; + + /* Start the on-chip PHY and its PLL. */ + if (data->set_phy_power) + data->set_phy_power(1); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume); + +static const struct dsps_musb_wrapper ti81xx_driver_data __devinitconst = { + .revision = 0x00, + .control = 0x14, + .status = 0x18, + .eoi = 0x24, + .epintr_set = 0x38, + .epintr_clear = 0x40, + .epintr_status = 0x30, + .coreintr_set = 0x3c, + .coreintr_clear = 0x44, + .coreintr_status = 0x34, + .phy_utmi = 0xe0, + .mode = 0xe8, + .reset = 0, + .otg_disable = 21, + .iddig = 8, + .usb_shift = 0, + .usb_mask = 0x1ff, + .usb_bitmap = (0x1ff << 0), + .drvvbus = 8, + .txep_shift = 0, + .txep_mask = 0xffff, + .txep_bitmap = (0xffff << 0), + .rxep_shift = 16, + .rxep_mask = 0xfffe, + .rxep_bitmap = (0xfffe << 16), + .musb_core_offset = 0x400, + .poll_seconds = 2, +}; + +static const struct platform_device_id musb_dsps_id_table[] __devinitconst = { + { + .name = "musb-ti81xx", + .driver_data = (kernel_ulong_t) &ti81xx_driver_data, + }, + { }, /* Terminating Entry */ +}; +MODULE_DEVICE_TABLE(platform, musb_dsps_id_table); + +static const struct of_device_id musb_dsps_of_match[] __devinitconst = { + { .compatible = "musb-ti81xx", }, + { .compatible = "ti,ti81xx-musb", }, + { .compatible = "ti,am335x-musb", }, + { }, +}; +MODULE_DEVICE_TABLE(of, musb_dsps_of_match); + +static struct platform_driver dsps_usbss_driver = { + .probe = dsps_probe, + .remove = __devexit_p(dsps_remove), + .driver = { + .name = "musb-dsps", + .pm = &dsps_pm_ops, + .of_match_table = musb_dsps_of_match, + }, + .id_table = musb_dsps_id_table, +}; + +MODULE_DESCRIPTION("TI DSPS MUSB Glue Layer"); +MODULE_AUTHOR("Ravi B "); +MODULE_AUTHOR("Ajay Kumar Gupta "); +MODULE_LICENSE("GPL v2"); + +static int __init dsps_init(void) +{ + return platform_driver_register(&dsps_usbss_driver); +} +subsys_initcall(dsps_init); + +static void __exit dsps_exit(void) +{ + platform_driver_unregister(&dsps_usbss_driver); +} +module_exit(dsps_exit); -- cgit v0.10.2 From fa296528835c66284c90457a2e20d9e8d9dc686e Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Mon, 12 Mar 2012 19:30:24 +0530 Subject: usb: musb: enable support for am335x Enabled the flag so that musb_dsps glue file can be used for am335x Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 126c220..ef0c3f9 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -8,7 +8,7 @@ config USB_MUSB_HDRC tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' depends on USB && USB_GADGET select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN) - select NOP_USB_XCEIV if SOC_OMAPTI81XX + select NOP_USB_XCEIV if (SOC_OMAPTI81XX || SOC_OMAPAM33XX) select TWL4030_USB if MACH_OMAP_3430SDP select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS @@ -57,7 +57,7 @@ config USB_MUSB_AM35X config USB_MUSB_DSPS tristate "TI DSPS platforms" - depends on SOC_OMAPTI81XX + depends on SOC_OMAPTI81XX || SOC_OMAPAM33XX config USB_MUSB_BLACKFIN tristate "Blackfin" -- cgit v0.10.2 From 3cdb772160c13ae6c162fe729460dc11f8437eec Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 4 Apr 2012 22:14:58 +0800 Subject: usb: gadget: use module_pci_driver This patch converts the drivers in drivers/usb/gadget/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin Cc: Thomas Dahlmann Cc: Xiaochen Shen Cc: Pavankumar Kondeti Cc: Greg Kroah-Hartman Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 7777927..e6bb107 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -3402,19 +3402,7 @@ static struct pci_driver udc_pci_driver = { .remove = udc_pci_remove, }; -/* Inits driver */ -static int __init init(void) -{ - return pci_register_driver(&udc_pci_driver); -} -module_init(init); - -/* Cleans driver */ -static void __exit cleanup(void) -{ - pci_unregister_driver(&udc_pci_driver); -} -module_exit(cleanup); +module_pci_driver(udc_pci_driver); MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION); MODULE_AUTHOR("Thomas Dahlmann"); diff --git a/drivers/usb/gadget/ci13xxx_pci.c b/drivers/usb/gadget/ci13xxx_pci.c index 883ab5e..63ef96c 100644 --- a/drivers/usb/gadget/ci13xxx_pci.c +++ b/drivers/usb/gadget/ci13xxx_pci.c @@ -148,27 +148,7 @@ static struct pci_driver ci13xxx_pci_driver = { .remove = __devexit_p(ci13xxx_pci_remove), }; -/** - * ci13xxx_pci_init: module init - * - * Driver load - */ -static int __init ci13xxx_pci_init(void) -{ - return pci_register_driver(&ci13xxx_pci_driver); -} -module_init(ci13xxx_pci_init); - -/** - * ci13xxx_pci_exit: module exit - * - * Driver unload - */ -static void __exit ci13xxx_pci_exit(void) -{ - pci_unregister_driver(&ci13xxx_pci_driver); -} -module_exit(ci13xxx_pci_exit); +module_pci_driver(ci13xxx_pci_driver); MODULE_AUTHOR("MIPS - David Lopo "); MODULE_DESCRIPTION("MIPS CI13XXX USB Peripheral Controller"); diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index e151d6b..6ae874e 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -1895,14 +1895,4 @@ static struct pci_driver goku_pci_driver = { /* FIXME add power management support */ }; -static int __init init (void) -{ - return pci_register_driver (&goku_pci_driver); -} -module_init (init); - -static void __exit cleanup (void) -{ - pci_unregister_driver (&goku_pci_driver); -} -module_exit (cleanup); +module_pci_driver(goku_pci_driver); diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index f9cedd5..1308112 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -3412,23 +3412,9 @@ static struct pci_driver langwell_pci_driver = { .shutdown = langwell_udc_shutdown, }; - -static int __init init(void) -{ - return pci_register_driver(&langwell_pci_driver); -} -module_init(init); - - -static void __exit cleanup(void) -{ - pci_unregister_driver(&langwell_pci_driver); -} -module_exit(cleanup); - +module_pci_driver(langwell_pci_driver); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Xiaochen Shen "); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 6530706..3143a83 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -3282,7 +3282,6 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = { MODULE_DEVICE_TABLE(pci, pch_udc_pcidev_id); - static struct pci_driver pch_udc_driver = { .name = KBUILD_MODNAME, .id_table = pch_udc_pcidev_id, @@ -3293,17 +3292,7 @@ static struct pci_driver pch_udc_driver = { .shutdown = pch_udc_shutdown, }; -static int __init pch_udc_pci_init(void) -{ - return pci_register_driver(&pch_udc_driver); -} -module_init(pch_udc_pci_init); - -static void __exit pch_udc_pci_exit(void) -{ - pci_unregister_driver(&pch_udc_driver); -} -module_exit(pch_udc_pci_exit); +module_pci_driver(pch_udc_driver); MODULE_DESCRIPTION("Intel EG20T USB Device Controller"); MODULE_AUTHOR("LAPIS Semiconductor, "); -- cgit v0.10.2 From 31fb6014165358e71196bd7a9bf236c00e0b2cd8 Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:23 +0200 Subject: usb: gadget: Update ci13xxx_udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 243ef1a..38b1f4e 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -1916,7 +1916,7 @@ __acquires(udc->lock) int type, num, dir, err = -EINVAL; struct usb_ctrlrequest req; - if (mEp->desc == NULL) + if (mEp->ep.desc == NULL) continue; /* not configured */ if (hw_test_and_clear_complete(i)) { @@ -2109,7 +2109,7 @@ static int ep_enable(struct usb_ep *ep, /* only internal SW should enable ctrl endpts */ - mEp->desc = desc; + mEp->ep.desc = desc; if (!list_empty(&mEp->qh.queue)) warn("enabling a non-empty endpoint!"); @@ -2161,7 +2161,7 @@ static int ep_disable(struct usb_ep *ep) if (ep == NULL) return -EINVAL; - else if (mEp->desc == NULL) + else if (mEp->ep.desc == NULL) return -EBUSY; spin_lock_irqsave(mEp->lock, flags); @@ -2180,7 +2180,6 @@ static int ep_disable(struct usb_ep *ep) } while (mEp->dir != direction); - mEp->desc = NULL; mEp->ep.desc = NULL; spin_unlock_irqrestore(mEp->lock, flags); @@ -2269,7 +2268,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, trace("%p, %p, %X", ep, req, gfp_flags); - if (ep == NULL || req == NULL || mEp->desc == NULL) + if (ep == NULL || req == NULL || mEp->ep.desc == NULL) return -EINVAL; spin_lock_irqsave(mEp->lock, flags); @@ -2332,7 +2331,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) trace("%p, %p", ep, req); if (ep == NULL || req == NULL || mReq->req.status != -EALREADY || - mEp->desc == NULL || list_empty(&mReq->queue) || + mEp->ep.desc == NULL || list_empty(&mReq->queue) || list_empty(&mEp->qh.queue)) return -EINVAL; @@ -2375,7 +2374,7 @@ static int ep_set_halt(struct usb_ep *ep, int value) trace("%p, %i", ep, value); - if (ep == NULL || mEp->desc == NULL) + if (ep == NULL || mEp->ep.desc == NULL) return -EINVAL; spin_lock_irqsave(mEp->lock, flags); @@ -2418,7 +2417,7 @@ static int ep_set_wedge(struct usb_ep *ep) trace("%p", ep); - if (ep == NULL || mEp->desc == NULL) + if (ep == NULL || mEp->ep.desc == NULL) return -EINVAL; spin_lock_irqsave(mEp->lock, flags); diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h index 0d31af5..cde036d 100644 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -82,7 +82,6 @@ struct ci13xxx_req { /* Extension of usb_ep */ struct ci13xxx_ep { struct usb_ep ep; - const struct usb_endpoint_descriptor *desc; u8 dir; u8 num; u8 type; -- cgit v0.10.2 From 16e78db720baa9356485336ec137c7ee0a482a9b Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:24 +0200 Subject: usb: dwc3: Update dwc3 udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 6c7945b..9c5c73a 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -361,7 +361,6 @@ struct dwc3_ep { dma_addr_t trb_pool_dma; u32 free_slot; u32 busy_slot; - const struct usb_endpoint_descriptor *desc; const struct usb_ss_ep_comp_descriptor *comp_desc; struct dwc3 *dwc; diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 3584a16..3453ca1 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -179,7 +179,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, int ret; spin_lock_irqsave(&dwc->lock, flags); - if (!dep->desc) { + if (!dep->endpoint.desc) { dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n", request, dep->name); ret = -ESHUTDOWN; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 5255fe9..561625a 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -178,8 +178,8 @@ int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc) if (!(dep->flags & DWC3_EP_ENABLED)) continue; - if (usb_endpoint_xfer_bulk(dep->desc) - || usb_endpoint_xfer_isoc(dep->desc)) + if (usb_endpoint_xfer_bulk(dep->endpoint.desc) + || usb_endpoint_xfer_isoc(dep->endpoint.desc)) mult = 3; /* @@ -229,7 +229,7 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, * completed (not the LINK TRB). */ if (((dep->busy_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) && - usb_endpoint_xfer_isoc(dep->desc)) + usb_endpoint_xfer_isoc(dep->endpoint.desc)) dep->busy_slot++; } list_del(&req->list); @@ -470,7 +470,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, if (ret) return ret; - dep->desc = desc; + dep->endpoint.desc = desc; dep->comp_desc = comp_desc; dep->type = usb_endpoint_type(desc); dep->flags |= DWC3_EP_ENABLED; @@ -533,7 +533,6 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); dep->stream_capable = false; - dep->desc = NULL; dep->endpoint.desc = NULL; dep->comp_desc = NULL; dep->type = 0; @@ -694,7 +693,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, /* Skip the LINK-TRB on ISOC */ if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) && - usb_endpoint_xfer_isoc(dep->desc)) + usb_endpoint_xfer_isoc(dep->endpoint.desc)) return; if (!req->trb) { @@ -707,7 +706,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, trb->bpl = lower_32_bits(dma); trb->bph = upper_32_bits(dma); - switch (usb_endpoint_type(dep->desc)) { + switch (usb_endpoint_type(dep->endpoint.desc)) { case USB_ENDPOINT_XFER_CONTROL: trb->ctrl = DWC3_TRBCTL_CONTROL_SETUP; break; @@ -732,7 +731,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, BUG(); } - if (usb_endpoint_xfer_isoc(dep->desc)) { + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; trb->ctrl |= DWC3_TRB_CTRL_CSP; } else { @@ -743,7 +742,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, trb->ctrl |= DWC3_TRB_CTRL_LST; } - if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable) + if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable) trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(req->request.stream_id); trb->ctrl |= DWC3_TRB_CTRL_HWO; @@ -771,7 +770,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting) trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK; /* Can't wrap around on a non-isoc EP since there's no link TRB */ - if (!usb_endpoint_xfer_isoc(dep->desc)) { + if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) { max = DWC3_TRB_NUM - (dep->free_slot & DWC3_TRB_MASK); if (trbs_left > max) trbs_left = max; @@ -797,7 +796,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting) * processed from the first TRB until the last one. Since we * don't wrap around we have to start at the beginning. */ - if (usb_endpoint_xfer_isoc(dep->desc)) { + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { dep->busy_slot = 1; dep->free_slot = 1; } else { @@ -807,7 +806,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting) } /* The last TRB is a link TRB, not used for xfer */ - if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->desc)) + if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc)) return; list_for_each_entry_safe(req, n, &dep->request_list, list) { @@ -984,7 +983,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) int start_trans; start_trans = 1; - if (usb_endpoint_xfer_isoc(dep->desc) && + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && (dep->flags & DWC3_EP_BUSY)) start_trans = 0; @@ -1011,7 +1010,7 @@ static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, int ret; - if (!dep->desc) { + if (!dep->endpoint.desc) { dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n", request, ep->name); return -ESHUTDOWN; @@ -1125,7 +1124,7 @@ static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value) spin_lock_irqsave(&dwc->lock, flags); - if (usb_endpoint_xfer_isoc(dep->desc)) { + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name); ret = -EINVAL; goto out; @@ -1681,7 +1680,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, case DWC3_DEPEVT_XFERCOMPLETE: dep->res_trans_idx = 0; - if (usb_endpoint_xfer_isoc(dep->desc)) { + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n", dep->name); return; @@ -1690,7 +1689,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, dwc3_endpoint_transfer_complete(dwc, dep, event, 1); break; case DWC3_DEPEVT_XFERINPROGRESS: - if (!usb_endpoint_xfer_isoc(dep->desc)) { + if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) { dev_dbg(dwc->dev, "%s is not an Isochronous endpoint\n", dep->name); return; @@ -1699,7 +1698,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, dwc3_endpoint_transfer_complete(dwc, dep, event, 0); break; case DWC3_DEPEVT_XFERNOTREADY: - if (usb_endpoint_xfer_isoc(dep->desc)) { + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { dwc3_gadget_start_isoc(dwc, dep, event); } else { int ret; @@ -1720,7 +1719,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, break; case DWC3_DEPEVT_STREAMEVT: - if (!usb_endpoint_xfer_bulk(dep->desc)) { + if (!usb_endpoint_xfer_bulk(dep->endpoint.desc)) { dev_err(dwc->dev, "Stream event for non-Bulk %s\n", dep->name); return; -- cgit v0.10.2 From ef20a72b7372e5643b157bd61bbdcf0f6ed1e330 Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:25 +0200 Subject: usb: gadget: Update amd5536udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index e6bb107..187d211 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -333,7 +333,7 @@ udc_ep_enable(struct usb_ep *usbep, const struct usb_endpoint_descriptor *desc) return -ESHUTDOWN; spin_lock_irqsave(&dev->lock, iflags); - ep->desc = desc; + ep->ep.desc = desc; ep->halted = 0; @@ -442,7 +442,6 @@ static void ep_init(struct udc_regs __iomem *regs, struct udc_ep *ep) u32 tmp; VDBG(ep->dev, "ep-%d reset\n", ep->num); - ep->desc = NULL; ep->ep.desc = NULL; ep->ep.ops = &udc_ep_ops; INIT_LIST_HEAD(&ep->queue); @@ -489,7 +488,7 @@ static int udc_ep_disable(struct usb_ep *usbep) return -EINVAL; ep = container_of(usbep, struct udc_ep, ep); - if (usbep->name == ep0_string || !ep->desc) + if (usbep->name == ep0_string || !ep->ep.desc) return -EINVAL; DBG(ep->dev, "Disable ep-%d\n", ep->num); @@ -1066,7 +1065,7 @@ udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp) return -EINVAL; ep = container_of(usbep, struct udc_ep, ep); - if (!ep->desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX)) + if (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX)) return -EINVAL; VDBG(ep->dev, "udc_queue(): ep%d-in=%d\n", ep->num, ep->in); @@ -1257,7 +1256,7 @@ static int udc_dequeue(struct usb_ep *usbep, struct usb_request *usbreq) unsigned long iflags; ep = container_of(usbep, struct udc_ep, ep); - if (!usbep || !usbreq || (!ep->desc && (ep->num != 0 + if (!usbep || !usbreq || (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX))) return -EINVAL; @@ -1317,7 +1316,7 @@ udc_set_halt(struct usb_ep *usbep, int halt) pr_debug("set_halt %s: halt=%d\n", usbep->name, halt); ep = container_of(usbep, struct udc_ep, ep); - if (!ep->desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX)) + if (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX)) return -EINVAL; if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; @@ -1539,7 +1538,7 @@ static void udc_setup_endpoints(struct udc *dev) * disabling ep interrupts when ENUM interrupt occurs but ep is * not enabled by gadget driver */ - if (!ep->desc) + if (!ep->ep.desc) ep_init(dev->regs, ep); if (use_dma) { diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h index f87e29c..14af87d 100644 --- a/drivers/usb/gadget/amd5536udc.h +++ b/drivers/usb/gadget/amd5536udc.h @@ -512,7 +512,6 @@ struct udc_ep { /* queue for requests */ struct list_head queue; - const struct usb_endpoint_descriptor *desc; unsigned halted; unsigned cancel_transfer; unsigned num : 5, -- cgit v0.10.2 From 5a6506f00efa4b38b181152b69a072e766c7ce92 Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:26 +0200 Subject: usb: gadget: Update at91_udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 9d7bcd9..86cc909 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -212,7 +212,7 @@ static int proc_udc_show(struct seq_file *s, void *unused) if (udc->enabled && udc->vbus) { proc_ep_show(s, &udc->ep[0]); list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { - if (ep->desc) + if (ep->ep.desc) proc_ep_show(s, ep); } } @@ -530,7 +530,7 @@ ok: tmp |= AT91_UDP_EPEDS; __raw_writel(tmp, ep->creg); - ep->desc = desc; + ep->ep.desc = desc; ep->ep.maxpacket = maxpacket; /* @@ -558,7 +558,6 @@ static int at91_ep_disable (struct usb_ep * _ep) nuke(ep, -ESHUTDOWN); /* restore the endpoint's pristine config */ - ep->desc = NULL; ep->ep.desc = NULL; ep->ep.maxpacket = ep->maxpacket; @@ -618,7 +617,7 @@ static int at91_ep_queue(struct usb_ep *_ep, return -EINVAL; } - if (!_ep || (!ep->desc && ep->ep.name != ep0name)) { + if (!_ep || (!ep->ep.desc && ep->ep.name != ep0name)) { DBG("invalid ep\n"); return -EINVAL; } @@ -833,7 +832,7 @@ static void udc_reinit(struct at91_udc *udc) if (i != 0) list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); - ep->desc = NULL; + ep->ep.desc = NULL; ep->stopped = 0; ep->fifo_bank = 0; ep->ep.maxpacket = ep->maxpacket; @@ -1172,7 +1171,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) | USB_REQ_GET_STATUS: tmp = w_index & USB_ENDPOINT_NUMBER_MASK; ep = &udc->ep[tmp]; - if (tmp >= NUM_ENDPOINTS || (tmp && !ep->desc)) + if (tmp >= NUM_ENDPOINTS || (tmp && !ep->ep.desc)) goto stall; if (tmp) { @@ -1197,7 +1196,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) ep = &udc->ep[tmp]; if (w_value != USB_ENDPOINT_HALT || tmp >= NUM_ENDPOINTS) goto stall; - if (!ep->desc || ep->is_iso) + if (!ep->ep.desc || ep->is_iso) goto stall; if ((w_index & USB_DIR_IN)) { if (!ep->is_in) @@ -1218,7 +1217,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) goto stall; if (tmp == 0) goto succeed; - if (!ep->desc || ep->is_iso) + if (!ep->ep.desc || ep->is_iso) goto stall; if ((w_index & USB_DIR_IN)) { if (!ep->is_in) diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h index 3c0315b..e647d1c 100644 --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -105,9 +105,6 @@ struct at91_ep { unsigned is_in:1; unsigned is_iso:1; unsigned fifo_bank:1; - - const struct usb_endpoint_descriptor - *desc; }; /* -- cgit v0.10.2 From 978def1c4e796eebca6047b8de164c7d182494e3 Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:27 +0200 Subject: usb: gadget: Update atmel_usba_udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 9f98508..f545e93 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -599,13 +599,13 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) spin_lock_irqsave(&ep->udc->lock, flags); - if (ep->desc) { + if (ep->ep.desc) { spin_unlock_irqrestore(&ep->udc->lock, flags); DBG(DBG_ERR, "ep%d already enabled\n", ep->index); return -EBUSY; } - ep->desc = desc; + ep->ep.desc = desc; ep->ep.maxpacket = maxpacket; usba_ep_writel(ep, CFG, ept_cfg); @@ -647,7 +647,7 @@ static int usba_ep_disable(struct usb_ep *_ep) spin_lock_irqsave(&udc->lock, flags); - if (!ep->desc) { + if (!ep->ep.desc) { spin_unlock_irqrestore(&udc->lock, flags); /* REVISIT because this driver disables endpoints in * reset_all_endpoints() before calling disconnect(), @@ -658,7 +658,6 @@ static int usba_ep_disable(struct usb_ep *_ep) ep->ep.name); return -EINVAL; } - ep->desc = NULL; ep->ep.desc = NULL; list_splice_init(&ep->queue, &req_list); @@ -752,7 +751,7 @@ static int queue_dma(struct usba_udc *udc, struct usba_ep *ep, */ ret = -ESHUTDOWN; spin_lock_irqsave(&udc->lock, flags); - if (ep->desc) { + if (ep->ep.desc) { if (list_empty(&ep->queue)) submit_request(ep, req); @@ -776,7 +775,8 @@ usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n", ep->ep.name, req, _req->length); - if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || !ep->desc) + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || + !ep->ep.desc) return -ESHUTDOWN; req->submitted = 0; @@ -792,7 +792,7 @@ usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* May have received a reset since last time we checked */ ret = -ESHUTDOWN; spin_lock_irqsave(&udc->lock, flags); - if (ep->desc) { + if (ep->ep.desc) { list_add_tail(&req->queue, &ep->queue); if ((!ep_is_control(ep) && ep->is_in) || @@ -905,7 +905,7 @@ static int usba_ep_set_halt(struct usb_ep *_ep, int value) DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name, value ? "set" : "clear"); - if (!ep->desc) { + if (!ep->ep.desc) { DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n", ep->ep.name); return -ENODEV; @@ -1071,7 +1071,7 @@ static void reset_all_endpoints(struct usba_udc *udc) * FIXME remove this code ... and retest thoroughly. */ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { - if (ep->desc) { + if (ep->ep.desc) { spin_unlock(&udc->lock); usba_ep_disable(&ep->ep); spin_lock(&udc->lock); @@ -1089,9 +1089,9 @@ static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex) list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { u8 bEndpointAddress; - if (!ep->desc) + if (!ep->ep.desc) continue; - bEndpointAddress = ep->desc->bEndpointAddress; + bEndpointAddress = ep->ep.desc->bEndpointAddress; if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) continue; if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) @@ -1727,7 +1727,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) usb_speed_string(udc->gadget.speed)); ep0 = &usba_ep[0]; - ep0->desc = &usba_ep0_desc; + ep0->ep.desc = &usba_ep0_desc; ep0->state = WAIT_FOR_SETUP; usba_ep_writel(ep0, CFG, (USBA_BF(EPT_SIZE, EP0_EPT_SIZE) diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h index 88a2e07..9791259 100644 --- a/drivers/usb/gadget/atmel_usba_udc.h +++ b/drivers/usb/gadget/atmel_usba_udc.h @@ -280,7 +280,6 @@ struct usba_ep { struct usba_udc *udc; struct list_head queue; - const struct usb_endpoint_descriptor *desc; u16 fifo_size; u8 nr_banks; -- cgit v0.10.2 From ec39e2aeeff2901ef1b1d8ea09533e4b86ad89bb Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:28 +0200 Subject: usb: gadget: Update fsl_qe_udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 877a2c4..26cf993 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -489,10 +489,10 @@ static int qe_ep_register_init(struct qe_udc *udc, unsigned char pipe_num) epparam = udc->ep_param[pipe_num]; usep = 0; - logepnum = (ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + logepnum = (ep->ep.desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); usep |= (logepnum << USB_EPNUM_SHIFT); - switch (ep->desc->bmAttributes & 0x03) { + switch (ep->ep.desc->bmAttributes & 0x03) { case USB_ENDPOINT_XFER_BULK: usep |= USB_TRANS_BULK; break; @@ -644,7 +644,7 @@ static int qe_ep_init(struct qe_udc *udc, /* initialize ep structure */ ep->ep.maxpacket = max; ep->tm = (u8)(desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); - ep->desc = desc; + ep->ep.desc = desc; ep->stopped = 0; ep->init = 1; @@ -1599,7 +1599,7 @@ static int qe_ep_enable(struct usb_ep *_ep, ep = container_of(_ep, struct qe_ep, ep); /* catch various bogus parameters */ - if (!_ep || !desc || ep->desc || _ep->name == ep_name[0] || + if (!_ep || !desc || ep->ep.desc || _ep->name == ep_name[0] || (desc->bDescriptorType != USB_DT_ENDPOINT)) return -EINVAL; @@ -1629,7 +1629,7 @@ static int qe_ep_disable(struct usb_ep *_ep) ep = container_of(_ep, struct qe_ep, ep); udc = ep->udc; - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { dev_dbg(udc->dev, "%s not enabled\n", _ep ? ep->ep.name : NULL); return -EINVAL; } @@ -1637,7 +1637,6 @@ static int qe_ep_disable(struct usb_ep *_ep) spin_lock_irqsave(&udc->lock, flags); /* Nuke all pending requests (does flush) */ nuke(ep, -ESHUTDOWN); - ep->desc = NULL; ep->ep.desc = NULL; ep->stopped = 1; ep->tx_req = NULL; @@ -1715,7 +1714,7 @@ static int __qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req) dev_dbg(udc->dev, "bad params\n"); return -EINVAL; } - if (!_ep || (!ep->desc && ep_index(ep))) { + if (!_ep || (!ep->ep.desc && ep_index(ep))) { dev_dbg(udc->dev, "bad ep\n"); return -EINVAL; } @@ -1826,7 +1825,7 @@ static int qe_ep_set_halt(struct usb_ep *_ep, int value) struct qe_udc *udc; ep = container_of(_ep, struct qe_ep, ep); - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { status = -EINVAL; goto out; } @@ -2015,7 +2014,7 @@ static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value, u16 usep; /* stall if endpoint doesn't exist */ - if (!target_ep->desc) + if (!target_ep->ep.desc) goto stall; usep = in_be16(&udc->usb_regs->usb_usep[pipe]); @@ -2502,7 +2501,7 @@ static int __devinit qe_ep_config(struct qe_udc *udc, unsigned char pipe_num) ep->ep.ops = &qe_ep_ops; ep->stopped = 1; ep->ep.maxpacket = (unsigned short) ~0; - ep->desc = NULL; + ep->ep.desc = NULL; ep->dir = 0xff; ep->epnum = (u8)pipe_num; ep->sent = 0; diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h index 1da5fb0..4c07ca9 100644 --- a/drivers/usb/gadget/fsl_qe_udc.h +++ b/drivers/usb/gadget/fsl_qe_udc.h @@ -266,7 +266,6 @@ struct qe_ep { struct usb_ep ep; struct list_head queue; struct qe_udc *udc; - const struct usb_endpoint_descriptor *desc; struct usb_gadget *gadget; u8 state; -- cgit v0.10.2 From 79149b8bd0270a268344300a77a2dd3f51039f14 Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:29 +0200 Subject: usb: gadget: Update fsl_udc_core to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 55abfb6..8f6fc70 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -549,7 +549,7 @@ static int fsl_ep_enable(struct usb_ep *_ep, ep = container_of(_ep, struct fsl_ep, ep); /* catch various bogus parameters */ - if (!_ep || !desc || ep->desc + if (!_ep || !desc || ep->ep.desc || (desc->bDescriptorType != USB_DT_ENDPOINT)) return -EINVAL; @@ -590,7 +590,7 @@ static int fsl_ep_enable(struct usb_ep *_ep, spin_lock_irqsave(&udc->lock, flags); ep->ep.maxpacket = max; - ep->desc = desc; + ep->ep.desc = desc; ep->stopped = 0; /* Controller related setup */ @@ -614,7 +614,7 @@ static int fsl_ep_enable(struct usb_ep *_ep, retval = 0; VDBG("enabled %s (ep%d%s) maxpacket %d",ep->ep.name, - ep->desc->bEndpointAddress & 0x0f, + ep->ep.desc->bEndpointAddress & 0x0f, (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out", max); en_done: @@ -634,7 +634,7 @@ static int fsl_ep_disable(struct usb_ep *_ep) int ep_num; ep = container_of(_ep, struct fsl_ep, ep); - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { VDBG("%s not enabled", _ep ? ep->ep.name : NULL); return -EINVAL; } @@ -657,7 +657,6 @@ static int fsl_ep_disable(struct usb_ep *_ep) /* nuke all pending requests (does flush) */ nuke(ep, -ESHUTDOWN); - ep->desc = NULL; ep->ep.desc = NULL; ep->stopped = 1; spin_unlock_irqrestore(&udc->lock, flags); @@ -874,11 +873,11 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) VDBG("%s, bad params", __func__); return -EINVAL; } - if (unlikely(!_ep || !ep->desc)) { + if (unlikely(!_ep || !ep->ep.desc)) { VDBG("%s, bad ep", __func__); return -EINVAL; } - if (usb_endpoint_xfer_isoc(ep->desc)) { + if (usb_endpoint_xfer_isoc(ep->ep.desc)) { if (req->req.length > ep->ep.maxpacket) return -EMSGSIZE; } @@ -1017,12 +1016,12 @@ static int fsl_ep_set_halt(struct usb_ep *_ep, int value) ep = container_of(_ep, struct fsl_ep, ep); udc = ep->udc; - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { status = -EINVAL; goto out; } - if (usb_endpoint_xfer_isoc(ep->desc)) { + if (usb_endpoint_xfer_isoc(ep->ep.desc)) { status = -EOPNOTSUPP; goto out; } @@ -1061,7 +1060,7 @@ static int fsl_ep_fifo_status(struct usb_ep *_ep) struct ep_queue_head *qh; ep = container_of(_ep, struct fsl_ep, ep); - if (!_ep || (!ep->desc && ep_index(ep) != 0)) + if (!_ep || (!ep->ep.desc && ep_index(ep) != 0)) return -ENODEV; udc = (struct fsl_udc *)ep->udc; @@ -1094,7 +1093,7 @@ static void fsl_ep_fifo_flush(struct usb_ep *_ep) return; } else { ep = container_of(_ep, struct fsl_ep, ep); - if (!ep->desc) + if (!ep->ep.desc) return; } ep_num = ep_index(ep); @@ -1349,7 +1348,7 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index)); /* stall if endpoint doesn't exist */ - if (!target_ep->desc) + if (!target_ep->ep.desc) goto stall; tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep)) << USB_ENDPOINT_HALT; @@ -2259,7 +2258,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, } /* other gadget->eplist ep */ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { - if (ep->desc) { + if (ep->ep.desc) { t = scnprintf(next, size, "\nFor %s Maxpkt is 0x%x " "index is 0x%x\n", diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index e651469..d502225 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -450,7 +450,6 @@ struct fsl_ep { struct list_head queue; struct fsl_udc *udc; struct ep_queue_head *qh; - const struct usb_endpoint_descriptor *desc; struct usb_gadget *gadget; char name[14]; -- cgit v0.10.2 From fab1137f63c417da02406a3a97c77790e6d06e6f Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:30 +0200 Subject: usb: gadget: Update fusb300_udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index 5831cb4..cdd9454 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -203,7 +203,7 @@ static int config_ep(struct fusb300_ep *ep, struct fusb300 *fusb300 = ep->fusb300; struct fusb300_ep_info info; - ep->desc = desc; + ep->ep.desc = desc; info.interval = 0; info.addrofs = 0; @@ -443,7 +443,7 @@ static int fusb300_queue(struct usb_ep *_ep, struct usb_request *_req, req->req.actual = 0; req->req.status = -EINPROGRESS; - if (ep->desc == NULL) /* ep0 */ + if (ep->ep.desc == NULL) /* ep0 */ ep0_queue(ep, req); else if (request && !ep->stall) enable_fifo_int(ep); diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h index 92745bd..542cd83 100644 --- a/drivers/usb/gadget/fusb300_udc.h +++ b/drivers/usb/gadget/fusb300_udc.h @@ -650,7 +650,6 @@ struct fusb300_ep { unsigned char epnum; unsigned char type; - const struct usb_endpoint_descriptor *desc; }; struct fusb300 { -- cgit v0.10.2 From db79d9811b077fc9c215d33a57bbb11cecc59fe3 Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:31 +0200 Subject: usb: gadget: Update goku_udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index 6ae874e..b241e6c 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -102,7 +102,7 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) unsigned long flags; ep = container_of(_ep, struct goku_ep, ep); - if (!_ep || !desc || ep->desc + if (!_ep || !desc || ep->ep.desc || desc->bDescriptorType != USB_DT_ENDPOINT) return -EINVAL; dev = ep->dev; @@ -176,7 +176,7 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) command(ep->dev->regs, COMMAND_RESET, ep->num); ep->ep.maxpacket = max; ep->stopped = 0; - ep->desc = desc; + ep->ep.desc = desc; spin_unlock_irqrestore(&ep->dev->lock, flags); DBG(dev, "enable %s %s %s maxpacket %u\n", ep->ep.name, @@ -233,7 +233,6 @@ static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep) } ep->ep.maxpacket = MAX_FIFO_SIZE; - ep->desc = NULL; ep->ep.desc = NULL; ep->stopped = 1; ep->irqs = 0; @@ -247,7 +246,7 @@ static int goku_ep_disable(struct usb_ep *_ep) unsigned long flags; ep = container_of(_ep, struct goku_ep, ep); - if (!_ep || !ep->desc) + if (!_ep || !ep->ep.desc) return -ENODEV; dev = ep->dev; if (dev->ep0state == EP0_SUSPEND) @@ -722,7 +721,7 @@ goku_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) || !_req->buf || !list_empty(&req->queue))) return -EINVAL; ep = container_of(_ep, struct goku_ep, ep); - if (unlikely(!_ep || (!ep->desc && ep->num != 0))) + if (unlikely(!_ep || (!ep->ep.desc && ep->num != 0))) return -EINVAL; dev = ep->dev; if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) @@ -815,7 +814,7 @@ static int goku_dequeue(struct usb_ep *_ep, struct usb_request *_req) unsigned long flags; ep = container_of(_ep, struct goku_ep, ep); - if (!_ep || !_req || (!ep->desc && ep->num != 0)) + if (!_ep || !_req || (!ep->ep.desc && ep->num != 0)) return -EINVAL; dev = ep->dev; if (!dev->driver) @@ -896,7 +895,7 @@ static int goku_set_halt(struct usb_ep *_ep, int value) return -EINVAL; /* don't change EPxSTATUS_EP_INVALID to READY */ - } else if (!ep->desc) { + } else if (!ep->ep.desc) { DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name); return -EINVAL; } @@ -955,7 +954,7 @@ static void goku_fifo_flush(struct usb_ep *_ep) VDBG(ep->dev, "%s %s\n", __func__, ep->ep.name); /* don't change EPxSTATUS_EP_INVALID to READY */ - if (!ep->desc && ep->num != 0) { + if (!ep->ep.desc && ep->num != 0) { DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name); return; } @@ -1152,7 +1151,7 @@ udc_proc_read(char *buffer, char **start, off_t off, int count, struct goku_ep *ep = &dev->ep [i]; struct goku_request *req; - if (i && !ep->desc) + if (i && !ep->ep.desc) continue; tmp = readl(ep->reg_status); @@ -1473,7 +1472,8 @@ static void ep0_setup(struct goku_udc *dev) case USB_RECIP_ENDPOINT: tmp = le16_to_cpu(ctrl.wIndex) & 0x0f; /* active endpoint */ - if (tmp > 3 || (!dev->ep[tmp].desc && tmp != 0)) + if (tmp > 3 || + (!dev->ep[tmp].ep.desc && tmp != 0)) goto stall; if (ctrl.wIndex & cpu_to_le16( USB_DIR_IN)) { diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h index e7e0c69..85cdce0 100644 --- a/drivers/usb/gadget/goku_udc.h +++ b/drivers/usb/gadget/goku_udc.h @@ -216,7 +216,6 @@ struct goku_ep { /* analogous to a host-side qh */ struct list_head queue; - const struct usb_endpoint_descriptor *desc; u32 __iomem *reg_fifo; u32 __iomem *reg_mode; -- cgit v0.10.2 From a1976f750bafb85a0ae69860178b99d1f364a479 Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:32 +0200 Subject: usb: gadget: Update langwell_udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index 1308112..e119519 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -154,7 +154,7 @@ static inline void print_all_registers(struct langwell_udc *dev) /*-------------------------------------------------------------------------*/ #define is_in(ep) (((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir == \ - USB_DIR_IN) : (usb_endpoint_dir_in((ep)->desc))) + USB_DIR_IN) : (usb_endpoint_dir_in((ep)->ep.desc))) #define DIR_STRING(ep) (is_in(ep) ? "in" : "out") @@ -257,7 +257,7 @@ static int langwell_ep_enable(struct usb_ep *_ep, dev = ep->dev; dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - if (!_ep || !desc || ep->desc + if (!_ep || !desc || ep->ep.desc || desc->bDescriptorType != USB_DT_ENDPOINT) return -EINVAL; @@ -337,7 +337,7 @@ static int langwell_ep_enable(struct usb_ep *_ep, spin_lock_irqsave(&dev->lock, flags); ep->ep.maxpacket = max; - ep->desc = desc; + ep->ep.desc = desc; ep->stopped = 0; ep->ep_num = usb_endpoint_num(desc); @@ -432,7 +432,7 @@ static void nuke(struct langwell_ep *ep, int status) ep->stopped = 1; /* endpoint fifo flush */ - if (&ep->ep && ep->desc) + if (&ep->ep && ep->ep.desc) langwell_ep_fifo_flush(&ep->ep); while (!list_empty(&ep->queue)) { @@ -459,7 +459,7 @@ static int langwell_ep_disable(struct usb_ep *_ep) dev = ep->dev; dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - if (!_ep || !ep->desc) + if (!_ep || !ep->ep.desc) return -EINVAL; spin_lock_irqsave(&dev->lock, flags); @@ -476,7 +476,6 @@ static int langwell_ep_disable(struct usb_ep *_ep) /* nuke all pending requests (does flush) */ nuke(ep, -ESHUTDOWN); - ep->desc = NULL; ep->ep.desc = NULL; ep->stopped = 1; @@ -752,14 +751,14 @@ static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req, return -EINVAL; } - if (unlikely(!_ep || !ep->desc)) + if (unlikely(!_ep || !ep->ep.desc)) return -EINVAL; dev = ep->dev; req->ep = ep; dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - if (usb_endpoint_xfer_isoc(ep->desc)) { + if (usb_endpoint_xfer_isoc(ep->ep.desc)) { if (req->req.length > ep->ep.maxpacket) return -EMSGSIZE; is_iso = 1; @@ -822,7 +821,7 @@ static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) dev = ep->dev; dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - if (!_ep || !ep->desc || !_req) + if (!_ep || !ep->ep.desc || !_req) return -EINVAL; if (!dev->driver) @@ -950,13 +949,13 @@ static int langwell_ep_set_halt(struct usb_ep *_ep, int value) dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - if (!_ep || !ep->desc) + if (!_ep || !ep->ep.desc) return -EINVAL; if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - if (usb_endpoint_xfer_isoc(ep->desc)) + if (usb_endpoint_xfer_isoc(ep->ep.desc)) return -EOPNOTSUPP; spin_lock_irqsave(&dev->lock, flags); @@ -999,7 +998,7 @@ static int langwell_ep_set_wedge(struct usb_ep *_ep) dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - if (!_ep || !ep->desc) + if (!_ep || !ep->ep.desc) return -EINVAL; dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); @@ -1020,8 +1019,8 @@ static void langwell_ep_fifo_flush(struct usb_ep *_ep) dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); - if (!_ep || !ep->desc) { - dev_vdbg(&dev->pdev->dev, "ep or ep->desc is NULL\n"); + if (!_ep || !ep->ep.desc) { + dev_vdbg(&dev->pdev->dev, "ep or ep->ep.desc is NULL\n"); dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); return; } @@ -1402,7 +1401,7 @@ static int eps_reinit(struct langwell_udc *dev) ep->stopped = 0; ep->ep.maxpacket = EP0_MAX_PKT_SIZE; ep->ep_num = 0; - ep->desc = &langwell_ep0_desc; + ep->ep.desc = &langwell_ep0_desc; INIT_LIST_HEAD(&ep->queue); ep->ep_type = USB_ENDPOINT_XFER_CONTROL; @@ -1737,7 +1736,7 @@ static ssize_t show_langwell_udc(struct device *_dev, } /* other gadget->eplist ep */ list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) { - if (ep->desc) { + if (ep->ep.desc) { t = scnprintf(next, size, "\n%s MaxPacketSize: 0x%x, " "ep_num: %d\n", @@ -2046,10 +2045,10 @@ static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev, list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) { u8 bEndpointAddress; - if (!ep->desc) + if (!ep->ep.desc) continue; - bEndpointAddress = ep->desc->bEndpointAddress; + bEndpointAddress = ep->ep.desc->bEndpointAddress; if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) continue; diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h index 8c8087a..38fa3c8 100644 --- a/drivers/usb/gadget/langwell_udc.h +++ b/drivers/usb/gadget/langwell_udc.h @@ -116,7 +116,6 @@ struct langwell_ep { unsigned long irqs; struct list_head queue; struct langwell_dqh *dqh; - const struct usb_endpoint_descriptor *desc; char name[14]; unsigned stopped:1, ep_type:2, -- cgit v0.10.2 From 2eb2cff56aeb02e9451341b4d0fe7801e7fade14 Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:33 +0200 Subject: usb: gadget: Update m66592-udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 3608b3b..8981fbb 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -390,7 +390,7 @@ static int alloc_pipe_config(struct m66592_ep *ep, int *counter; int ret; - ep->desc = desc; + ep->ep.desc = desc; BUG_ON(ep->pipenum); @@ -558,7 +558,7 @@ static void start_packet_read(struct m66592_ep *ep, struct m66592_request *req) static void start_packet(struct m66592_ep *ep, struct m66592_request *req) { - if (ep->desc->bEndpointAddress & USB_DIR_IN) + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) start_packet_write(ep, req); else start_packet_read(ep, req); @@ -734,7 +734,7 @@ __acquires(m66592->lock) if (restart) { req = list_entry(ep->queue.next, struct m66592_request, queue); - if (ep->desc) + if (ep->ep.desc) start_packet(ep, req); } } @@ -917,7 +917,7 @@ static void irq_pipe_ready(struct m66592 *m66592, u16 status, u16 enb) ep = m66592->pipenum2ep[pipenum]; req = list_entry(ep->queue.next, struct m66592_request, queue); - if (ep->desc->bEndpointAddress & USB_DIR_IN) + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) irq_packet_write(ep, req); else irq_packet_read(ep, req); @@ -1377,7 +1377,7 @@ static int m66592_queue(struct usb_ep *_ep, struct usb_request *_req, req->req.actual = 0; req->req.status = -EINPROGRESS; - if (ep->desc == NULL) /* control */ + if (ep->ep.desc == NULL) /* control */ start_ep0(ep, req); else { if (request && !ep->busy) diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h index 9d9f7e3..88c85b4 100644 --- a/drivers/usb/gadget/m66592-udc.h +++ b/drivers/usb/gadget/m66592-udc.h @@ -456,7 +456,7 @@ struct m66592_ep { unsigned use_dma:1; u16 pipenum; u16 type; - const struct usb_endpoint_descriptor *desc; + /* register address */ unsigned long fifoaddr; unsigned long fifosel; -- cgit v0.10.2 From b1371d161121108b9e58aeb1a16adc8a0b9b97c1 Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:34 +0200 Subject: usb: gadget: Update mv_udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h index e2be951..9073436 100644 --- a/drivers/usb/gadget/mv_udc.h +++ b/drivers/usb/gadget/mv_udc.h @@ -232,7 +232,6 @@ struct mv_ep { struct mv_udc *udc; struct list_head queue; struct mv_dqh *dqh; - const struct usb_endpoint_descriptor *desc; u32 direction; char name[14]; unsigned stopped:1, diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index a73cf40..dbcd132 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -464,7 +464,7 @@ static int mv_ep_enable(struct usb_ep *_ep, ep = container_of(_ep, struct mv_ep, ep); udc = ep->udc; - if (!_ep || !desc || ep->desc + if (!_ep || !desc || ep->ep.desc || desc->bDescriptorType != USB_DT_ENDPOINT) return -EINVAL; @@ -528,7 +528,7 @@ static int mv_ep_enable(struct usb_ep *_ep, dqh->size_ioc_int_sts = 0; ep->ep.maxpacket = max; - ep->desc = desc; + ep->ep.desc = desc; ep->stopped = 0; /* Enable the endpoint for Rx or Tx and set the endpoint type */ @@ -580,7 +580,7 @@ static int mv_ep_disable(struct usb_ep *_ep) unsigned long flags; ep = container_of(_ep, struct mv_ep, ep); - if ((_ep == NULL) || !ep->desc) + if ((_ep == NULL) || !ep->ep.desc) return -EINVAL; udc = ep->udc; @@ -606,7 +606,6 @@ static int mv_ep_disable(struct usb_ep *_ep) /* nuke all pending requests (does flush) */ nuke(ep, -ESHUTDOWN); - ep->desc = NULL; ep->ep.desc = NULL; ep->stopped = 1; @@ -651,7 +650,7 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep) return; ep = container_of(_ep, struct mv_ep, ep); - if (!ep->desc) + if (!ep->ep.desc) return; udc = ep->udc; @@ -715,11 +714,11 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) dev_err(&udc->dev->dev, "%s, bad params", __func__); return -EINVAL; } - if (unlikely(!_ep || !ep->desc)) { + if (unlikely(!_ep || !ep->ep.desc)) { dev_err(&udc->dev->dev, "%s, bad ep", __func__); return -EINVAL; } - if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { if (req->req.length > ep->ep.maxpacket) return -EMSGSIZE; } @@ -925,12 +924,12 @@ static int mv_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge) ep = container_of(_ep, struct mv_ep, ep); udc = ep->udc; - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { status = -EINVAL; goto out; } - if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { status = -EOPNOTSUPP; goto out; } @@ -1279,7 +1278,7 @@ static int eps_init(struct mv_udc *udc) ep->stopped = 0; ep->ep.maxpacket = EP0_MAX_PKT_SIZE; ep->ep_num = 0; - ep->desc = &mv_ep0_desc; + ep->ep.desc = &mv_ep0_desc; INIT_LIST_HEAD(&ep->queue); ep->ep_type = USB_ENDPOINT_XFER_CONTROL; -- cgit v0.10.2 From f8bdae061488f4120834beb632d74b4a5309753f Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:35 +0200 Subject: usb: gadget: Update omap_udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 3b4b6dd..7ba3246 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -153,7 +153,7 @@ static int omap_ep_enable(struct usb_ep *_ep, u16 maxp; /* catch various bogus parameters */ - if (!_ep || !desc || ep->desc + if (!_ep || !desc || ep->ep.desc || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress || ep->maxpacket < usb_endpoint_maxp(desc)) { @@ -200,7 +200,7 @@ static int omap_ep_enable(struct usb_ep *_ep, spin_lock_irqsave(&udc->lock, flags); - ep->desc = desc; + ep->ep.desc = desc; ep->irqs = 0; ep->stopped = 0; ep->ep.maxpacket = maxp; @@ -242,14 +242,13 @@ static int omap_ep_disable(struct usb_ep *_ep) struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); unsigned long flags; - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { DBG("%s, %s not enabled\n", __func__, _ep ? ep->ep.name : NULL); return -EINVAL; } spin_lock_irqsave(&ep->udc->lock, flags); - ep->desc = NULL; ep->ep.desc = NULL; nuke (ep, -ESHUTDOWN); ep->ep.maxpacket = ep->maxpacket; @@ -917,7 +916,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) DBG("%s, bad params\n", __func__); return -EINVAL; } - if (!_ep || (!ep->desc && ep->bEndpointAddress)) { + if (!_ep || (!ep->ep.desc && ep->bEndpointAddress)) { DBG("%s, bad ep\n", __func__); return -EINVAL; } @@ -1121,7 +1120,7 @@ static int omap_ep_set_halt(struct usb_ep *_ep, int value) status = 0; /* otherwise, all active non-ISO endpoints can halt */ - } else if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC && ep->desc) { + } else if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC && ep->ep.desc) { /* IN endpoints must already be idle */ if ((ep->bEndpointAddress & USB_DIR_IN) @@ -1625,7 +1624,7 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src) if (w_index & USB_DIR_IN) ep += 16; if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC - || !ep->desc) + || !ep->ep.desc) goto do_stall; use_ep(ep, 0); omap_writew(udc->clr_halt, UDC_CTRL); @@ -1653,7 +1652,7 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src) if (w_index & USB_DIR_IN) ep += 16; if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC - || ep == ep0 || !ep->desc) + || ep == ep0 || !ep->ep.desc) goto do_stall; if (use_dma && ep->has_dma) { /* this has rude side-effects (aborts) and @@ -1688,7 +1687,7 @@ ep0out_status_stage: ep = &udc->ep[w_index & 0xf]; if (w_index & USB_DIR_IN) ep += 16; - if (!ep->desc) + if (!ep->ep.desc) goto do_stall; /* iso never stalls */ @@ -2509,7 +2508,7 @@ static int proc_udc_show(struct seq_file *s, void *_) if (tmp & UDC_ADD) { list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { - if (ep->desc) + if (ep->ep.desc) proc_ep_show(s, ep); } } diff --git a/drivers/usb/gadget/omap_udc.h b/drivers/usb/gadget/omap_udc.h index 59d3b22..cfadeb5 100644 --- a/drivers/usb/gadget/omap_udc.h +++ b/drivers/usb/gadget/omap_udc.h @@ -140,7 +140,6 @@ struct omap_ep { struct list_head queue; unsigned long irqs; struct list_head iso; - const struct usb_endpoint_descriptor *desc; char name[14]; u16 maxpacket; u8 bEndpointAddress; -- cgit v0.10.2 From c18800d8f9708c9e4a0b593d34f63af169b4b59a Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:36 +0200 Subject: usb: gadget: Update pxa25x_udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 41ed69c..d7c8cb3 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -218,7 +218,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, struct pxa25x_udc *dev; ep = container_of (_ep, struct pxa25x_ep, ep); - if (!_ep || !desc || ep->desc || _ep->name == ep0name + if (!_ep || !desc || ep->ep.desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress || ep->fifo_size < usb_endpoint_maxp (desc)) { @@ -249,7 +249,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, return -ESHUTDOWN; } - ep->desc = desc; + ep->ep.desc = desc; ep->stopped = 0; ep->pio_irqs = 0; ep->ep.maxpacket = usb_endpoint_maxp (desc); @@ -269,7 +269,7 @@ static int pxa25x_ep_disable (struct usb_ep *_ep) unsigned long flags; ep = container_of (_ep, struct pxa25x_ep, ep); - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { DMSG("%s, %s not enabled\n", __func__, _ep ? ep->ep.name : NULL); return -EINVAL; @@ -281,7 +281,6 @@ static int pxa25x_ep_disable (struct usb_ep *_ep) /* flush fifo (mostly for IN buffers) */ pxa25x_ep_fifo_flush (_ep); - ep->desc = NULL; ep->ep.desc = NULL; ep->stopped = 1; @@ -390,7 +389,7 @@ write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req) { unsigned max; - max = usb_endpoint_maxp(ep->desc); + max = usb_endpoint_maxp(ep->ep.desc); do { unsigned count; int is_last, is_short; @@ -644,7 +643,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) } ep = container_of(_ep, struct pxa25x_ep, ep); - if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { + if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { DMSG("%s, bad ep\n", __func__); return -EINVAL; } @@ -660,7 +659,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) * we can report per-packet status. that also helps with dma. */ if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC - && req->req.length > usb_endpoint_maxp (ep->desc))) + && req->req.length > usb_endpoint_maxp(ep->ep.desc))) return -EMSGSIZE; DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n", @@ -673,7 +672,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* kickstart this i/o queue? */ if (list_empty(&ep->queue) && !ep->stopped) { - if (ep->desc == NULL/* ep0 */) { + if (ep->ep.desc == NULL/* ep0 */) { unsigned length = _req->length; switch (dev->ep0state) { @@ -722,7 +721,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) req = NULL; } - if (likely (req && ep->desc)) + if (likely(req && ep->ep.desc)) pio_irq_enable(ep->bEndpointAddress); } @@ -749,7 +748,7 @@ static void nuke(struct pxa25x_ep *ep, int status) queue); done(ep, req, status); } - if (ep->desc) + if (ep->ep.desc) pio_irq_disable (ep->bEndpointAddress); } @@ -792,7 +791,7 @@ static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value) ep = container_of(_ep, struct pxa25x_ep, ep); if (unlikely (!_ep - || (!ep->desc && ep->ep.name != ep0name)) + || (!ep->ep.desc && ep->ep.name != ep0name)) || ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { DMSG("%s, bad ep\n", __func__); return -EINVAL; @@ -820,7 +819,7 @@ static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value) *ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF; /* ep0 needs special care */ - if (!ep->desc) { + if (!ep->ep.desc) { start_watchdog(ep->dev); ep->dev->req_pending = 0; ep->dev->ep0state = EP0_STALL; @@ -1087,7 +1086,7 @@ udc_seq_show(struct seq_file *m, void *_d) if (i != 0) { const struct usb_endpoint_descriptor *desc; - desc = ep->desc; + desc = ep->ep.desc; if (!desc) continue; tmp = *dev->ep [i].reg_udccs; @@ -1191,7 +1190,6 @@ static void udc_reinit(struct pxa25x_udc *dev) if (i != 0) list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); - ep->desc = NULL; ep->ep.desc = NULL; ep->stopped = 0; INIT_LIST_HEAD (&ep->queue); diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h index 893e917..861f4df 100644 --- a/drivers/usb/gadget/pxa25x_udc.h +++ b/drivers/usb/gadget/pxa25x_udc.h @@ -41,7 +41,6 @@ struct pxa25x_ep { struct usb_ep ep; struct pxa25x_udc *dev; - const struct usb_endpoint_descriptor *desc; struct list_head queue; unsigned long pio_irqs; -- cgit v0.10.2 From 9e658f2600dc37158b17c3d63daeaf2e55915d35 Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:37 +0200 Subject: usb: gadget: Update r8a66597-udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index c4401e7..b54152b 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -459,7 +459,7 @@ static int alloc_pipe_config(struct r8a66597_ep *ep, unsigned char *counter; int ret; - ep->desc = desc; + ep->ep.desc = desc; if (ep->pipenum) /* already allocated pipe */ return 0; @@ -648,7 +648,7 @@ static int sudmac_alloc_channel(struct r8a66597 *r8a66597, /* set SUDMAC parameters */ dma = &r8a66597->dma; dma->used = 1; - if (ep->desc->bEndpointAddress & USB_DIR_IN) { + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) { dma->dir = 1; } else { dma->dir = 0; @@ -770,7 +770,7 @@ static void start_packet_read(struct r8a66597_ep *ep, static void start_packet(struct r8a66597_ep *ep, struct r8a66597_request *req) { - if (ep->desc->bEndpointAddress & USB_DIR_IN) + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) start_packet_write(ep, req); else start_packet_read(ep, req); @@ -930,7 +930,7 @@ __acquires(r8a66597->lock) if (restart) { req = get_request_from_ep(ep); - if (ep->desc) + if (ep->ep.desc) start_packet(ep, req); } } @@ -1116,7 +1116,7 @@ static void irq_pipe_ready(struct r8a66597 *r8a66597, u16 status, u16 enb) r8a66597_write(r8a66597, ~check, BRDYSTS); ep = r8a66597->pipenum2ep[pipenum]; req = get_request_from_ep(ep); - if (ep->desc->bEndpointAddress & USB_DIR_IN) + if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) irq_packet_write(ep, req); else irq_packet_read(ep, req); @@ -1627,7 +1627,7 @@ static int r8a66597_queue(struct usb_ep *_ep, struct usb_request *_req, req->req.actual = 0; req->req.status = -EINPROGRESS; - if (ep->desc == NULL) /* control */ + if (ep->ep.desc == NULL) /* control */ start_ep0(ep, req); else { if (request && !ep->busy) @@ -1692,7 +1692,7 @@ static int r8a66597_set_wedge(struct usb_ep *_ep) ep = container_of(_ep, struct r8a66597_ep, ep); - if (!ep || !ep->desc) + if (!ep || !ep->ep.desc) return -EINVAL; spin_lock_irqsave(&ep->r8a66597->lock, flags); diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h index 8e3de61..25eb132 100644 --- a/drivers/usb/gadget/r8a66597-udc.h +++ b/drivers/usb/gadget/r8a66597-udc.h @@ -72,7 +72,7 @@ struct r8a66597_ep { unsigned use_dma:1; u16 pipenum; u16 type; - const struct usb_endpoint_descriptor *desc; + /* register address */ unsigned char fifoaddr; unsigned char fifosel; -- cgit v0.10.2 From fa42e52ba4bdd80c4edea4664be7e4f01c587932 Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:38 +0200 Subject: usb: gadget: Update s3c2410_udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 195524c..3de71d3 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1062,7 +1062,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, ep = to_s3c2410_ep(_ep); - if (!_ep || !desc || ep->desc + if (!_ep || !desc || ep->ep.desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT) return -EINVAL; @@ -1075,7 +1075,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, local_irq_save (flags); _ep->maxpacket = max & 0x7ff; - ep->desc = desc; + ep->ep.desc = desc; ep->halted = 0; ep->bEndpointAddress = desc->bEndpointAddress; @@ -1136,7 +1136,7 @@ static int s3c2410_udc_ep_disable(struct usb_ep *_ep) unsigned long flags; u32 int_en_reg; - if (!_ep || !ep->desc) { + if (!_ep || !ep->ep.desc) { dprintk(DEBUG_NORMAL, "%s not enabled\n", _ep ? ep->ep.name : NULL); return -EINVAL; @@ -1146,7 +1146,6 @@ static int s3c2410_udc_ep_disable(struct usb_ep *_ep) dprintk(DEBUG_NORMAL, "ep_disable: %s\n", _ep->name); - ep->desc = NULL; ep->ep.desc = NULL; ep->halted = 1; @@ -1195,7 +1194,7 @@ s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req) dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req); - if (!ep || !_req || (!ep->desc && _ep->name != ep0name)) + if (!ep || !_req || (!ep->ep.desc && _ep->name != ep0name)) return; WARN_ON (!list_empty (&req->queue)); @@ -1215,7 +1214,7 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, int fifo_count = 0; unsigned long flags; - if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { + if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { dprintk(DEBUG_NORMAL, "%s: invalid args\n", __func__); return -EINVAL; } @@ -1363,7 +1362,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value) unsigned long flags; u32 idx; - if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { + if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { dprintk(DEBUG_NORMAL, "%s: inval 2\n", __func__); return -EINVAL; } @@ -1629,7 +1628,6 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev) list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); ep->dev = dev; - ep->desc = NULL; ep->ep.desc = NULL; ep->halted = 0; INIT_LIST_HEAD (&ep->queue); diff --git a/drivers/usb/gadget/s3c2410_udc.h b/drivers/usb/gadget/s3c2410_udc.h index 1653bae..3e80fd5 100644 --- a/drivers/usb/gadget/s3c2410_udc.h +++ b/drivers/usb/gadget/s3c2410_udc.h @@ -19,7 +19,6 @@ struct s3c2410_ep { unsigned long last_io; /* jiffies timestamp */ struct usb_gadget *gadget; struct s3c2410_udc *dev; - const struct usb_endpoint_descriptor *desc; struct usb_ep ep; u8 num; -- cgit v0.10.2 From 0ff21e0e9cdeb156d0872446fa5e49fb0aae76fd Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:39 +0200 Subject: usb: gadget: Update pch_udc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 3143a83..1cfcc9e 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -295,7 +295,6 @@ struct pch_udc_ep { struct pch_udc_data_dma_desc *td_data; struct pch_udc_dev *dev; unsigned long offset_addr; - const struct usb_endpoint_descriptor *desc; struct list_head queue; unsigned num:5, in:1, @@ -1705,7 +1704,7 @@ static int pch_udc_pcd_ep_enable(struct usb_ep *usbep, if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN)) return -ESHUTDOWN; spin_lock_irqsave(&dev->lock, iflags); - ep->desc = desc; + ep->ep.desc = desc; ep->halted = 0; pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc); ep->ep.maxpacket = usb_endpoint_maxp(desc); @@ -1734,7 +1733,7 @@ static int pch_udc_pcd_ep_disable(struct usb_ep *usbep) ep = container_of(usbep, struct pch_udc_ep, ep); dev = ep->dev; - if ((usbep->name == ep0_string) || !ep->desc) + if ((usbep->name == ep0_string) || !ep->ep.desc) return -EINVAL; spin_lock_irqsave(&ep->dev->lock, iflags); @@ -1742,7 +1741,6 @@ static int pch_udc_pcd_ep_disable(struct usb_ep *usbep) ep->halted = 1; pch_udc_ep_disable(ep); pch_udc_disable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num)); - ep->desc = NULL; ep->ep.desc = NULL; INIT_LIST_HEAD(&ep->queue); spin_unlock_irqrestore(&ep->dev->lock, iflags); @@ -1849,7 +1847,7 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq, return -EINVAL; ep = container_of(usbep, struct pch_udc_ep, ep); dev = ep->dev; - if (!ep->desc && ep->num) + if (!ep->ep.desc && ep->num) return -EINVAL; req = container_of(usbreq, struct pch_udc_request, req); if (!list_empty(&req->queue)) @@ -1949,7 +1947,7 @@ static int pch_udc_pcd_dequeue(struct usb_ep *usbep, ep = container_of(usbep, struct pch_udc_ep, ep); dev = ep->dev; - if (!usbep || !usbreq || (!ep->desc && ep->num)) + if (!usbep || !usbreq || (!ep->ep.desc && ep->num)) return ret; req = container_of(usbreq, struct pch_udc_request, req); spin_lock_irqsave(&ep->dev->lock, flags); @@ -1988,7 +1986,7 @@ static int pch_udc_pcd_set_halt(struct usb_ep *usbep, int halt) return -EINVAL; ep = container_of(usbep, struct pch_udc_ep, ep); dev = ep->dev; - if (!ep->desc && !ep->num) + if (!ep->ep.desc && !ep->num) return -EINVAL; if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN)) return -ESHUTDOWN; @@ -2033,7 +2031,7 @@ static int pch_udc_pcd_set_wedge(struct usb_ep *usbep) return -EINVAL; ep = container_of(usbep, struct pch_udc_ep, ep); dev = ep->dev; - if (!ep->desc && !ep->num) + if (!ep->ep.desc && !ep->num) return -EINVAL; if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN)) return -ESHUTDOWN; @@ -2065,7 +2063,7 @@ static void pch_udc_pcd_fifo_flush(struct usb_ep *usbep) return; ep = container_of(usbep, struct pch_udc_ep, ep); - if (ep->desc || !ep->num) + if (ep->ep.desc || !ep->num) pch_udc_ep_fifo_flush(ep, ep->in); } -- cgit v0.10.2 From 955846a60a9db884d6a5b644876a96b806a48a8d Mon Sep 17 00:00:00 2001 From: Ido Shayevitz Date: Mon, 12 Mar 2012 20:25:40 +0200 Subject: usb: gadget: Update s3c-hsudc to use usb_endpoint_descriptor inside the struct usb_ep Remove redundant pointer to struct usb_endpoint_descriptor. Signed-off-by: Ido Shayevitz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index cef9b82..36c6836 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -110,7 +110,6 @@ struct s3c_hsudc_ep { struct usb_ep ep; char name[20]; struct s3c_hsudc *dev; - const struct usb_endpoint_descriptor *desc; struct list_head queue; u8 stopped; u8 wedge; @@ -761,7 +760,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep, u32 ecr = 0; hsep = our_ep(_ep); - if (!_ep || !desc || hsep->desc || _ep->name == ep0name + if (!_ep || !desc || hsep->ep.desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || hsep->bEndpointAddress != desc->bEndpointAddress || ep_maxpacket(hsep) < usb_endpoint_maxp(desc)) @@ -783,7 +782,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep, writel(ecr, hsudc->regs + S3C_ECR); hsep->stopped = hsep->wedge = 0; - hsep->desc = desc; + hsep->ep.desc = desc; hsep->ep.maxpacket = usb_endpoint_maxp(desc); s3c_hsudc_set_halt(_ep, 0); @@ -806,7 +805,7 @@ static int s3c_hsudc_ep_disable(struct usb_ep *_ep) struct s3c_hsudc *hsudc = hsep->dev; unsigned long flags; - if (!_ep || !hsep->desc) + if (!_ep || !hsep->ep.desc) return -EINVAL; spin_lock_irqsave(&hsudc->lock, flags); @@ -816,7 +815,6 @@ static int s3c_hsudc_ep_disable(struct usb_ep *_ep) s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN); - hsep->desc = 0; hsep->ep.desc = NULL; hsep->stopped = 1; @@ -1006,7 +1004,6 @@ static void s3c_hsudc_initep(struct s3c_hsudc *hsudc, hsep->ep.maxpacket = epnum ? 512 : 64; hsep->ep.ops = &s3c_hsudc_ep_ops; hsep->fifo = hsudc->regs + S3C_BR(epnum); - hsep->desc = 0; hsep->ep.desc = NULL; hsep->stopped = 0; hsep->wedge = 0; -- cgit v0.10.2 From f3d8bf34c2c925867322197096ed501ceab8085a Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sat, 4 Feb 2012 18:55:23 +0100 Subject: usb: gadget: at91_udc: convert to new style start/stop interface This patches converts the driver into the new style start/stop interface. As a result the driver no longer uses the static global controller variable in start/stop functions. I kept the controller variable since it makes the init code a little simpler. Compile tested only. Cc: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 86cc909..43943aa 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -977,18 +977,18 @@ static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on) return 0; } -static int at91_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int at91_stop(struct usb_gadget_driver *driver); - +static int at91_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); +static int at91_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops at91_udc_ops = { .get_frame = at91_get_frame, .wakeup = at91_wakeup, .set_selfpowered = at91_set_selfpowered, .vbus_session = at91_vbus_session, .pullup = at91_pullup, - .start = at91_start, - .stop = at91_stop, + .udc_start = at91_start, + .udc_stop = at91_stop, /* * VBUS-powered devices may also also want to support bigger @@ -1626,66 +1626,34 @@ static void at91_vbus_timer(unsigned long data) schedule_work(&udc->vbus_timer_work); } -static int at91_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int at91_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct at91_udc *udc = &controller; - int retval; - unsigned long flags; - - if (!driver - || driver->max_speed < USB_SPEED_FULL - || !bind - || !driver->setup) { - DBG("bad parameter.\n"); - return -EINVAL; - } - - if (udc->driver) { - DBG("UDC already has a gadget driver\n"); - return -EBUSY; - } + struct at91_udc *udc; + udc = container_of(gadget, struct at91_udc, gadget); udc->driver = driver; udc->gadget.dev.driver = &driver->driver; dev_set_drvdata(&udc->gadget.dev, &driver->driver); udc->enabled = 1; udc->selfpowered = 1; - retval = bind(&udc->gadget); - if (retval) { - DBG("bind() returned %d\n", retval); - udc->driver = NULL; - udc->gadget.dev.driver = NULL; - dev_set_drvdata(&udc->gadget.dev, NULL); - udc->enabled = 0; - udc->selfpowered = 0; - return retval; - } - - spin_lock_irqsave(&udc->lock, flags); - pullup(udc, 1); - spin_unlock_irqrestore(&udc->lock, flags); - DBG("bound to %s\n", driver->driver.name); return 0; } -static int at91_stop(struct usb_gadget_driver *driver) +static int at91_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct at91_udc *udc = &controller; + struct at91_udc *udc; unsigned long flags; - if (!driver || driver != udc->driver || !driver->unbind) - return -EINVAL; - + udc = container_of(gadget, struct at91_udc, gadget); spin_lock_irqsave(&udc->lock, flags); udc->enabled = 0; at91_udp_write(udc, AT91_UDP_IDR, ~0); - pullup(udc, 0); spin_unlock_irqrestore(&udc->lock, flags); - driver->unbind(&udc->gadget); udc->gadget.dev.driver = NULL; dev_set_drvdata(&udc->gadget.dev, NULL); udc->driver = NULL; -- cgit v0.10.2 From d809f78f81fc1c7e9d8afaaa51ec4813612aff94 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sat, 4 Feb 2012 18:55:24 +0100 Subject: usb: gadget: atmel_usba_udc: convert to newstyle start/stop interface This patches converts the driver into the new style start/stop interface. As a result the driver no longer uses the static global the_udc variable in start/stop functions. I kept the the_udc variable since it makes the init code a little simpler. Someone with hardware might want to look if it possible to move the vbus irq/toggle_bias code into ->pullup(). Compile tested only. Cc: Nicolas Ferre Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index f545e93..e23bf79 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1008,16 +1008,16 @@ usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered) return 0; } -static int atmel_usba_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int atmel_usba_stop(struct usb_gadget_driver *driver); - +static int atmel_usba_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); +static int atmel_usba_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops usba_udc_ops = { .get_frame = usba_udc_get_frame, .wakeup = usba_udc_wakeup, .set_selfpowered = usba_udc_set_selfpowered, - .start = atmel_usba_start, - .stop = atmel_usba_stop, + .udc_start = atmel_usba_start, + .udc_stop = atmel_usba_stop, }; static struct usb_endpoint_descriptor usba_ep0_desc = { @@ -1795,21 +1795,13 @@ out: return IRQ_HANDLED; } -static int atmel_usba_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int atmel_usba_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct usba_udc *udc = &the_udc; + struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); unsigned long flags; - int ret; - - if (!udc->pdev) - return -ENODEV; spin_lock_irqsave(&udc->lock, flags); - if (udc->driver) { - spin_unlock_irqrestore(&udc->lock, flags); - return -EBUSY; - } udc->devstatus = 1 << USB_DEVICE_SELF_POWERED; udc->driver = driver; @@ -1819,13 +1811,6 @@ static int atmel_usba_start(struct usb_gadget_driver *driver, clk_enable(udc->pclk); clk_enable(udc->hclk); - ret = bind(&udc->gadget); - if (ret) { - DBG(DBG_ERR, "Could not bind to driver %s: error %d\n", - driver->driver.name, ret); - goto err_driver_bind; - } - DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name); udc->vbus_prev = 0; @@ -1842,23 +1827,14 @@ static int atmel_usba_start(struct usb_gadget_driver *driver, spin_unlock_irqrestore(&udc->lock, flags); return 0; - -err_driver_bind: - udc->driver = NULL; - udc->gadget.dev.driver = NULL; - return ret; } -static int atmel_usba_stop(struct usb_gadget_driver *driver) +static int atmel_usba_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct usba_udc *udc = &the_udc; + struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); unsigned long flags; - if (!udc->pdev) - return -ENODEV; - if (driver != udc->driver || !driver->unbind) - return -EINVAL; - if (gpio_is_valid(udc->vbus_pin)) disable_irq(gpio_to_irq(udc->vbus_pin)); @@ -1871,10 +1847,6 @@ static int atmel_usba_stop(struct usb_gadget_driver *driver) toggle_bias(0); usba_writel(udc, CTRL, USBA_DISABLE_MASK); - if (udc->driver->disconnect) - udc->driver->disconnect(&udc->gadget); - - driver->unbind(&udc->gadget); udc->gadget.dev.driver = NULL; udc->driver = NULL; -- cgit v0.10.2 From d77c1198666d87a9b21e9594ca29ac7e42011623 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sat, 4 Feb 2012 18:55:25 +0100 Subject: usb: gadget: fsl_qe_udc: convert to new style start/stop This patches converts the driver into the new style start/stop interface. As a result the driver no longer uses the static global udc_conroller variable. Compile tested only. Cc: Li Yang Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 26cf993..aae6e98 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -71,9 +71,6 @@ static struct usb_endpoint_descriptor qe_ep0_desc = { .wMaxPacketSize = USB_MAX_CTRL_PAYLOAD, }; -/* it is initialized in probe() */ -static struct qe_udc *udc_controller; - /******************************************************************** * Internal Used Function Start ********************************************************************/ @@ -188,8 +185,8 @@ static int qe_ep0_stall(struct qe_udc *udc) { qe_eptx_stall_change(&udc->eps[0], 1); qe_eprx_stall_change(&udc->eps[0], 1); - udc_controller->ep0_state = WAIT_FOR_SETUP; - udc_controller->ep0_dir = 0; + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = 0; return 0; } @@ -450,13 +447,13 @@ static int qe_ep_rxbd_update(struct qe_ep *ep) ep->rxbuf_d = virt_to_phys((void *)ep->rxbuffer); if (ep->rxbuf_d == DMA_ADDR_INVALID) { - ep->rxbuf_d = dma_map_single(udc_controller->gadget.dev.parent, + ep->rxbuf_d = dma_map_single(ep->udc->gadget.dev.parent, ep->rxbuffer, size, DMA_FROM_DEVICE); ep->rxbufmap = 1; } else { - dma_sync_single_for_device(udc_controller->gadget.dev.parent, + dma_sync_single_for_device(ep->udc->gadget.dev.parent, ep->rxbuf_d, size, DMA_FROM_DEVICE); ep->rxbufmap = 0; @@ -698,14 +695,14 @@ en_done: return -ENODEV; } -static inline void qe_usb_enable(void) +static inline void qe_usb_enable(struct qe_udc *udc) { - setbits8(&udc_controller->usb_regs->usb_usmod, USB_MODE_EN); + setbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN); } -static inline void qe_usb_disable(void) +static inline void qe_usb_disable(struct qe_udc *udc) { - clrbits8(&udc_controller->usb_regs->usb_usmod, USB_MODE_EN); + clrbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN); } /*----------------------------------------------------------------------------* @@ -1655,13 +1652,13 @@ static int qe_ep_disable(struct usb_ep *_ep) if (ep->dir != USB_DIR_IN) { kfree(ep->rxframe); if (ep->rxbufmap) { - dma_unmap_single(udc_controller->gadget.dev.parent, + dma_unmap_single(udc->gadget.dev.parent, ep->rxbuf_d, size, DMA_FROM_DEVICE); ep->rxbuf_d = DMA_ADDR_INVALID; } else { dma_sync_single_for_cpu( - udc_controller->gadget.dev.parent, + udc->gadget.dev.parent, ep->rxbuf_d, size, DMA_FROM_DEVICE); } @@ -1879,9 +1876,10 @@ static struct usb_ep_ops qe_ep_ops = { /* Get the current frame number */ static int qe_get_frame(struct usb_gadget *gadget) { + struct qe_udc *udc = container_of(gadget, struct qe_udc, gadget); u16 tmp; - tmp = in_be16(&udc_controller->usb_param->frame_n); + tmp = in_be16(&udc->usb_param->frame_n); if (tmp & 0x8000) tmp = tmp & 0x07ff; else @@ -1927,9 +1925,10 @@ static int qe_pullup(struct usb_gadget *gadget, int is_on) return -ENOTSUPP; } -static int fsl_qe_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int fsl_qe_stop(struct usb_gadget_driver *driver); +static int fsl_qe_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); +static int fsl_qe_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); /* defined in usb_gadget.h */ static struct usb_gadget_ops qe_gadget_ops = { @@ -1939,8 +1938,8 @@ static struct usb_gadget_ops qe_gadget_ops = { .vbus_session = qe_vbus_session, .vbus_draw = qe_vbus_draw, .pullup = qe_pullup, - .start = fsl_qe_start, - .stop = fsl_qe_stop, + .udc_start = fsl_qe_start, + .udc_stop = fsl_qe_stop, }; /*------------------------------------------------------------------------- @@ -2189,7 +2188,7 @@ static int reset_irq(struct qe_udc *udc) if (udc->usb_state == USB_STATE_DEFAULT) return 0; - qe_usb_disable(); + qe_usb_disable(udc); out_8(&udc->usb_regs->usb_usadr, 0); for (i = 0; i < USB_MAX_ENDPOINTS; i++) { @@ -2201,7 +2200,7 @@ static int reset_irq(struct qe_udc *udc) udc->usb_state = USB_STATE_DEFAULT; udc->ep0_state = WAIT_FOR_SETUP; udc->ep0_dir = USB_DIR_OUT; - qe_usb_enable(); + qe_usb_enable(udc); return 0; } @@ -2326,92 +2325,65 @@ static irqreturn_t qe_udc_irq(int irq, void *_udc) /*------------------------------------------------------------------------- Gadget driver probe and unregister. --------------------------------------------------------------------------*/ -static int fsl_qe_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int fsl_qe_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - int retval; - unsigned long flags = 0; - - /* standard operations */ - if (!udc_controller) - return -ENODEV; - - if (!driver || driver->max_speed < USB_SPEED_FULL - || !bind || !driver->disconnect || !driver->setup) - return -EINVAL; - - if (udc_controller->driver) - return -EBUSY; + struct qe_udc *udc; + unsigned long flags; + udc = container_of(gadget, struct qe_udc, gadget); /* lock is needed but whether should use this lock or another */ - spin_lock_irqsave(&udc_controller->lock, flags); + spin_lock_irqsave(&udc->lock, flags); driver->driver.bus = NULL; /* hook up the driver */ - udc_controller->driver = driver; - udc_controller->gadget.dev.driver = &driver->driver; - udc_controller->gadget.speed = driver->max_speed; - spin_unlock_irqrestore(&udc_controller->lock, flags); - - retval = bind(&udc_controller->gadget); - if (retval) { - dev_err(udc_controller->dev, "bind to %s --> %d", - driver->driver.name, retval); - udc_controller->gadget.dev.driver = NULL; - udc_controller->driver = NULL; - return retval; - } + udc->driver = driver; + udc->gadget.dev.driver = &driver->driver; + udc->gadget.speed = driver->max_speed; /* Enable IRQ reg and Set usbcmd reg EN bit */ - qe_usb_enable(); - - out_be16(&udc_controller->usb_regs->usb_usber, 0xffff); - out_be16(&udc_controller->usb_regs->usb_usbmr, USB_E_DEFAULT_DEVICE); - udc_controller->usb_state = USB_STATE_ATTACHED; - udc_controller->ep0_state = WAIT_FOR_SETUP; - udc_controller->ep0_dir = USB_DIR_OUT; - dev_info(udc_controller->dev, "%s bind to driver %s \n", - udc_controller->gadget.name, driver->driver.name); + qe_usb_enable(udc); + + out_be16(&udc->usb_regs->usb_usber, 0xffff); + out_be16(&udc->usb_regs->usb_usbmr, USB_E_DEFAULT_DEVICE); + udc->usb_state = USB_STATE_ATTACHED; + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = USB_DIR_OUT; + spin_unlock_irqrestore(&udc->lock, flags); + + dev_info(udc->dev, "%s bind to driver %s\n", udc->gadget.name, + driver->driver.name); return 0; } -static int fsl_qe_stop(struct usb_gadget_driver *driver) +static int fsl_qe_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { + struct qe_udc *udc; struct qe_ep *loop_ep; unsigned long flags; - if (!udc_controller) - return -ENODEV; - - if (!driver || driver != udc_controller->driver) - return -EINVAL; - + udc = container_of(gadget, struct qe_udc, gadget); /* stop usb controller, disable intr */ - qe_usb_disable(); + qe_usb_disable(udc); /* in fact, no needed */ - udc_controller->usb_state = USB_STATE_ATTACHED; - udc_controller->ep0_state = WAIT_FOR_SETUP; - udc_controller->ep0_dir = 0; + udc->usb_state = USB_STATE_ATTACHED; + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = 0; /* stand operation */ - spin_lock_irqsave(&udc_controller->lock, flags); - udc_controller->gadget.speed = USB_SPEED_UNKNOWN; - nuke(&udc_controller->eps[0], -ESHUTDOWN); - list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list, - ep.ep_list) + spin_lock_irqsave(&udc->lock, flags); + udc->gadget.speed = USB_SPEED_UNKNOWN; + nuke(&udc->eps[0], -ESHUTDOWN); + list_for_each_entry(loop_ep, &udc->gadget.ep_list, ep.ep_list) nuke(loop_ep, -ESHUTDOWN); - spin_unlock_irqrestore(&udc_controller->lock, flags); - - /* report disconnect; the controller is already quiesced */ - driver->disconnect(&udc_controller->gadget); + spin_unlock_irqrestore(&udc->lock, flags); - /* unbind gadget and unhook driver. */ - driver->unbind(&udc_controller->gadget); - udc_controller->gadget.dev.driver = NULL; - udc_controller->driver = NULL; + udc->gadget.dev.driver = NULL; + udc->driver = NULL; - dev_info(udc_controller->dev, "unregistered gadget driver '%s'\r\n", + dev_info(udc->dev, "unregistered gadget driver '%s'\r\n", driver->driver.name); return 0; } @@ -2530,21 +2502,22 @@ static int __devinit qe_ep_config(struct qe_udc *udc, unsigned char pipe_num) *----------------------------------------------------------------------*/ static void qe_udc_release(struct device *dev) { - int i = 0; + struct qe_udc *udc = container_of(dev, struct qe_udc, gadget.dev); + int i; - complete(udc_controller->done); - cpm_muram_free(cpm_muram_offset(udc_controller->ep_param[0])); + complete(udc->done); + cpm_muram_free(cpm_muram_offset(udc->ep_param[0])); for (i = 0; i < USB_MAX_ENDPOINTS; i++) - udc_controller->ep_param[i] = NULL; + udc->ep_param[i] = NULL; - kfree(udc_controller); - udc_controller = NULL; + kfree(udc); } /* Driver probe functions */ static const struct of_device_id qe_udc_match[]; static int __devinit qe_udc_probe(struct platform_device *ofdev) { + struct qe_udc *udc; const struct of_device_id *match; struct device_node *np = ofdev->dev.of_node; struct qe_ep *ep; @@ -2561,44 +2534,44 @@ static int __devinit qe_udc_probe(struct platform_device *ofdev) return -ENODEV; /* Initialize the udc structure including QH member and other member */ - udc_controller = qe_udc_config(ofdev); - if (!udc_controller) { + udc = qe_udc_config(ofdev); + if (!udc) { dev_err(&ofdev->dev, "failed to initialize\n"); return -ENOMEM; } - udc_controller->soc_type = (unsigned long)match->data; - udc_controller->usb_regs = of_iomap(np, 0); - if (!udc_controller->usb_regs) { + udc->soc_type = (unsigned long)match->data; + udc->usb_regs = of_iomap(np, 0); + if (!udc->usb_regs) { ret = -ENOMEM; goto err1; } /* initialize usb hw reg except for regs for EP, * leave usbintr reg untouched*/ - qe_udc_reg_init(udc_controller); + qe_udc_reg_init(udc); /* here comes the stand operations for probe * set the qe_udc->gadget.xxx */ - udc_controller->gadget.ops = &qe_gadget_ops; + udc->gadget.ops = &qe_gadget_ops; /* gadget.ep0 is a pointer */ - udc_controller->gadget.ep0 = &udc_controller->eps[0].ep; + udc->gadget.ep0 = &udc->eps[0].ep; - INIT_LIST_HEAD(&udc_controller->gadget.ep_list); + INIT_LIST_HEAD(&udc->gadget.ep_list); /* modify in register gadget process */ - udc_controller->gadget.speed = USB_SPEED_UNKNOWN; + udc->gadget.speed = USB_SPEED_UNKNOWN; /* name: Identifies the controller hardware type. */ - udc_controller->gadget.name = driver_name; + udc->gadget.name = driver_name; - device_initialize(&udc_controller->gadget.dev); + device_initialize(&udc->gadget.dev); - dev_set_name(&udc_controller->gadget.dev, "gadget"); + dev_set_name(&udc->gadget.dev, "gadget"); - udc_controller->gadget.dev.release = qe_udc_release; - udc_controller->gadget.dev.parent = &ofdev->dev; + udc->gadget.dev.release = qe_udc_release; + udc->gadget.dev.parent = &ofdev->dev; /* initialize qe_ep struct */ for (i = 0; i < USB_MAX_ENDPOINTS ; i++) { @@ -2607,104 +2580,104 @@ static int __devinit qe_udc_probe(struct platform_device *ofdev) /* setup the qe_ep struct and link ep.ep.list * into gadget.ep_list */ - qe_ep_config(udc_controller, (unsigned char)i); + qe_ep_config(udc, (unsigned char)i); } /* ep0 initialization in here */ - ret = qe_ep_init(udc_controller, 0, &qe_ep0_desc); + ret = qe_ep_init(udc, 0, &qe_ep0_desc); if (ret) goto err2; /* create a buf for ZLP send, need to remain zeroed */ - udc_controller->nullbuf = kzalloc(256, GFP_KERNEL); - if (udc_controller->nullbuf == NULL) { - dev_err(udc_controller->dev, "cannot alloc nullbuf\n"); + udc->nullbuf = kzalloc(256, GFP_KERNEL); + if (udc->nullbuf == NULL) { + dev_err(udc->dev, "cannot alloc nullbuf\n"); ret = -ENOMEM; goto err3; } /* buffer for data of get_status request */ - udc_controller->statusbuf = kzalloc(2, GFP_KERNEL); - if (udc_controller->statusbuf == NULL) { + udc->statusbuf = kzalloc(2, GFP_KERNEL); + if (udc->statusbuf == NULL) { ret = -ENOMEM; goto err4; } - udc_controller->nullp = virt_to_phys((void *)udc_controller->nullbuf); - if (udc_controller->nullp == DMA_ADDR_INVALID) { - udc_controller->nullp = dma_map_single( - udc_controller->gadget.dev.parent, - udc_controller->nullbuf, + udc->nullp = virt_to_phys((void *)udc->nullbuf); + if (udc->nullp == DMA_ADDR_INVALID) { + udc->nullp = dma_map_single( + udc->gadget.dev.parent, + udc->nullbuf, 256, DMA_TO_DEVICE); - udc_controller->nullmap = 1; + udc->nullmap = 1; } else { - dma_sync_single_for_device(udc_controller->gadget.dev.parent, - udc_controller->nullp, 256, + dma_sync_single_for_device(udc->gadget.dev.parent, + udc->nullp, 256, DMA_TO_DEVICE); } - tasklet_init(&udc_controller->rx_tasklet, ep_rx_tasklet, - (unsigned long)udc_controller); + tasklet_init(&udc->rx_tasklet, ep_rx_tasklet, + (unsigned long)udc); /* request irq and disable DR */ - udc_controller->usb_irq = irq_of_parse_and_map(np, 0); - if (!udc_controller->usb_irq) { + udc->usb_irq = irq_of_parse_and_map(np, 0); + if (!udc->usb_irq) { ret = -EINVAL; goto err_noirq; } - ret = request_irq(udc_controller->usb_irq, qe_udc_irq, 0, - driver_name, udc_controller); + ret = request_irq(udc->usb_irq, qe_udc_irq, 0, + driver_name, udc); if (ret) { - dev_err(udc_controller->dev, "cannot request irq %d err %d \n", - udc_controller->usb_irq, ret); + dev_err(udc->dev, "cannot request irq %d err %d\n", + udc->usb_irq, ret); goto err5; } - ret = device_add(&udc_controller->gadget.dev); + ret = device_add(&udc->gadget.dev); if (ret) goto err6; - ret = usb_add_gadget_udc(&ofdev->dev, &udc_controller->gadget); + ret = usb_add_gadget_udc(&ofdev->dev, &udc->gadget); if (ret) goto err7; - dev_info(udc_controller->dev, + dev_set_drvdata(&ofdev->dev, udc); + dev_info(udc->dev, "%s USB controller initialized as device\n", - (udc_controller->soc_type == PORT_QE) ? "QE" : "CPM"); + (udc->soc_type == PORT_QE) ? "QE" : "CPM"); return 0; err7: - device_unregister(&udc_controller->gadget.dev); + device_unregister(&udc->gadget.dev); err6: - free_irq(udc_controller->usb_irq, udc_controller); + free_irq(udc->usb_irq, udc); err5: - irq_dispose_mapping(udc_controller->usb_irq); + irq_dispose_mapping(udc->usb_irq); err_noirq: - if (udc_controller->nullmap) { - dma_unmap_single(udc_controller->gadget.dev.parent, - udc_controller->nullp, 256, + if (udc->nullmap) { + dma_unmap_single(udc->gadget.dev.parent, + udc->nullp, 256, DMA_TO_DEVICE); - udc_controller->nullp = DMA_ADDR_INVALID; + udc->nullp = DMA_ADDR_INVALID; } else { - dma_sync_single_for_cpu(udc_controller->gadget.dev.parent, - udc_controller->nullp, 256, + dma_sync_single_for_cpu(udc->gadget.dev.parent, + udc->nullp, 256, DMA_TO_DEVICE); } - kfree(udc_controller->statusbuf); + kfree(udc->statusbuf); err4: - kfree(udc_controller->nullbuf); + kfree(udc->nullbuf); err3: - ep = &udc_controller->eps[0]; + ep = &udc->eps[0]; cpm_muram_free(cpm_muram_offset(ep->rxbase)); kfree(ep->rxframe); kfree(ep->rxbuffer); kfree(ep->txframe); err2: - iounmap(udc_controller->usb_regs); + iounmap(udc->usb_regs); err1: - kfree(udc_controller); - udc_controller = NULL; + kfree(udc); return ret; } @@ -2722,44 +2695,41 @@ static int qe_udc_resume(struct platform_device *dev) static int __devexit qe_udc_remove(struct platform_device *ofdev) { + struct qe_udc *udc = dev_get_drvdata(&ofdev->dev); struct qe_ep *ep; unsigned int size; - DECLARE_COMPLETION(done); - if (!udc_controller) - return -ENODEV; - - usb_del_gadget_udc(&udc_controller->gadget); + usb_del_gadget_udc(&udc->gadget); - udc_controller->done = &done; - tasklet_disable(&udc_controller->rx_tasklet); + udc->done = &done; + tasklet_disable(&udc->rx_tasklet); - if (udc_controller->nullmap) { - dma_unmap_single(udc_controller->gadget.dev.parent, - udc_controller->nullp, 256, + if (udc->nullmap) { + dma_unmap_single(udc->gadget.dev.parent, + udc->nullp, 256, DMA_TO_DEVICE); - udc_controller->nullp = DMA_ADDR_INVALID; + udc->nullp = DMA_ADDR_INVALID; } else { - dma_sync_single_for_cpu(udc_controller->gadget.dev.parent, - udc_controller->nullp, 256, + dma_sync_single_for_cpu(udc->gadget.dev.parent, + udc->nullp, 256, DMA_TO_DEVICE); } - kfree(udc_controller->statusbuf); - kfree(udc_controller->nullbuf); + kfree(udc->statusbuf); + kfree(udc->nullbuf); - ep = &udc_controller->eps[0]; + ep = &udc->eps[0]; cpm_muram_free(cpm_muram_offset(ep->rxbase)); size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (USB_BDRING_LEN + 1); kfree(ep->rxframe); if (ep->rxbufmap) { - dma_unmap_single(udc_controller->gadget.dev.parent, + dma_unmap_single(udc->gadget.dev.parent, ep->rxbuf_d, size, DMA_FROM_DEVICE); ep->rxbuf_d = DMA_ADDR_INVALID; } else { - dma_sync_single_for_cpu(udc_controller->gadget.dev.parent, + dma_sync_single_for_cpu(udc->gadget.dev.parent, ep->rxbuf_d, size, DMA_FROM_DEVICE); } @@ -2767,14 +2737,14 @@ static int __devexit qe_udc_remove(struct platform_device *ofdev) kfree(ep->rxbuffer); kfree(ep->txframe); - free_irq(udc_controller->usb_irq, udc_controller); - irq_dispose_mapping(udc_controller->usb_irq); + free_irq(udc->usb_irq, udc); + irq_dispose_mapping(udc->usb_irq); - tasklet_kill(&udc_controller->rx_tasklet); + tasklet_kill(&udc->rx_tasklet); - iounmap(udc_controller->usb_regs); + iounmap(udc->usb_regs); - device_unregister(&udc_controller->gadget.dev); + device_unregister(&udc->gadget.dev); /* wait for release() of gadget.dev to free udc */ wait_for_completion(&done); -- cgit v0.10.2 From 504d14c4657e920927178fcb8d070f55f5d4eb66 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sat, 4 Feb 2012 18:55:26 +0100 Subject: usb: gadget: fsl_qe_udc: remove not implemented callbacks All of this callbacks which I remove here are not implemented and return an error code. The gadget code returns an error code if a callback is missing so there is no need to implement this twice. Cc: Li Yang Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index aae6e98..51881f3 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -1888,43 +1888,6 @@ static int qe_get_frame(struct usb_gadget *gadget) return (int)tmp; } -/* Tries to wake up the host connected to this gadget - * - * Return : 0-success - * Negative-this feature not enabled by host or not supported by device hw - */ -static int qe_wakeup(struct usb_gadget *gadget) -{ - return -ENOTSUPP; -} - -/* Notify controller that VBUS is powered, Called by whatever - detects VBUS sessions */ -static int qe_vbus_session(struct usb_gadget *gadget, int is_active) -{ - return -ENOTSUPP; -} - -/* constrain controller's VBUS power usage - * This call is used by gadget drivers during SET_CONFIGURATION calls, - * reporting how much power the device may consume. For example, this - * could affect how quickly batteries are recharged. - * - * Returns zero on success, else negative errno. - */ -static int qe_vbus_draw(struct usb_gadget *gadget, unsigned mA) -{ - return -ENOTSUPP; -} - -/* Change Data+ pullup status - * this func is used by usb_gadget_connect/disconnect - */ -static int qe_pullup(struct usb_gadget *gadget, int is_on) -{ - return -ENOTSUPP; -} - static int fsl_qe_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver); static int fsl_qe_stop(struct usb_gadget *gadget, @@ -1933,11 +1896,6 @@ static int fsl_qe_stop(struct usb_gadget *gadget, /* defined in usb_gadget.h */ static struct usb_gadget_ops qe_gadget_ops = { .get_frame = qe_get_frame, - .wakeup = qe_wakeup, -/* .set_selfpowered = qe_set_selfpowered,*/ /* always selfpowered */ - .vbus_session = qe_vbus_session, - .vbus_draw = qe_vbus_draw, - .pullup = qe_pullup, .udc_start = fsl_qe_start, .udc_stop = fsl_qe_stop, }; -- cgit v0.10.2 From 66ec8ed295087467ecea3a561cba005acc22fdd0 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sat, 4 Feb 2012 18:55:28 +0100 Subject: usb: gadget: imx_udc: convert to new style start/stop This patches converts the driver into the new style start/stop interface. As a result the driver no longer uses the static global controller variable in start/stop code. I kept the gloval controller variable because it keeps init simple. Compile tested only. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index 8d1c75a..54034f8 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -1237,14 +1237,15 @@ irq_handler_t intr_handler(int i) ******************************************************************************* */ -static int imx_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int imx_udc_stop(struct usb_gadget_driver *driver); +static int imx_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); +static int imx_udc_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops imx_udc_ops = { - .get_frame = imx_udc_get_frame, - .wakeup = imx_udc_wakeup, - .start = imx_udc_start, - .stop = imx_udc_stop, + .get_frame = imx_udc_get_frame, + .wakeup = imx_udc_wakeup, + .udc_start = imx_udc_start, + .udc_stop = imx_udc_stop, }; static struct imx_udc_struct controller = { @@ -1329,23 +1330,13 @@ static struct imx_udc_struct controller = { * USB gadget driver functions ******************************************************************************* */ -static int imx_udc_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int imx_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct imx_udc_struct *imx_usb = &controller; + struct imx_udc_struct *imx_usb; int retval; - if (!driver - || driver->max_speed < USB_SPEED_FULL - || !bind - || !driver->disconnect - || !driver->setup) - return -EINVAL; - if (!imx_usb) - return -ENODEV; - if (imx_usb->driver) - return -EBUSY; - + imx_usb = container_of(gadget, struct imx_udc_struct, gadget); /* first hook up the driver ... */ imx_usb->driver = driver; imx_usb->gadget.dev.driver = &driver->driver; @@ -1353,14 +1344,6 @@ static int imx_udc_start(struct usb_gadget_driver *driver, retval = device_add(&imx_usb->gadget.dev); if (retval) goto fail; - retval = bind(&imx_usb->gadget); - if (retval) { - D_ERR(imx_usb->dev, "<%s> bind to driver %s --> error %d\n", - __func__, driver->driver.name, retval); - device_del(&imx_usb->gadget.dev); - - goto fail; - } D_INI(imx_usb->dev, "<%s> registered gadget driver '%s'\n", __func__, driver->driver.name); @@ -1374,20 +1357,16 @@ fail: return retval; } -static int imx_udc_stop(struct usb_gadget_driver *driver) +static int imx_udc_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct imx_udc_struct *imx_usb = &controller; - - if (!imx_usb) - return -ENODEV; - if (!driver || driver != imx_usb->driver || !driver->unbind) - return -EINVAL; + struct imx_udc_struct *imx_usb = container_of(gadget, + struct imx_udc_struct, gadget); udc_stop_activity(imx_usb, driver); imx_udc_disable(imx_usb); del_timer(&imx_usb->timer); - driver->unbind(&imx_usb->gadget); imx_usb->gadget.dev.driver = NULL; imx_usb->driver = NULL; -- cgit v0.10.2 From d3bfd25821bcfb99a56c2094af249ee2d6c9e4dc Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 10 Feb 2012 13:47:47 +0100 Subject: usb: gadget: remove DUALSPEED from printer This patch removes the DUALSPEED macro and makes the HS (and FS) case the default. This is one little step before composite can be used for descriptor management. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 4e4dc1f..daef274 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -154,12 +154,6 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR); #define QLEN qlen -#ifdef CONFIG_USB_GADGET_DUALSPEED -#define DEVSPEED USB_SPEED_HIGH -#else /* full speed (low speed doesn't do bulk) */ -#define DEVSPEED USB_SPEED_FULL -#endif - /*-------------------------------------------------------------------------*/ #define xprintk(d, level, fmt, args...) \ @@ -278,8 +272,6 @@ static const struct usb_descriptor_header *fs_printer_function [11] = { NULL }; -#ifdef CONFIG_USB_GADGET_DUALSPEED - /* * usb 2.0 devices need to expose both high speed and full speed * descriptors, unless they only run at full speed. @@ -318,13 +310,6 @@ static const struct usb_descriptor_header *hs_printer_function [11] = { /* maxpacket and other transfer characteristics vary by speed. */ #define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs)) -#else - -/* if there's no high speed support, maxpacket doesn't change. */ -#define ep_desc(g, hs, fs) (((void)(g)), (fs)) - -#endif /* !CONFIG_USB_GADGET_DUALSPEED */ - /*-------------------------------------------------------------------------*/ /* descriptors that are built on-demand */ @@ -980,7 +965,6 @@ config_buf(enum usb_device_speed speed, u8 *buf, u8 type, unsigned index, { int len; const struct usb_descriptor_header **function; -#ifdef CONFIG_USB_GADGET_DUALSPEED int hs = (speed == USB_SPEED_HIGH); if (type == USB_DT_OTHER_SPEED_CONFIG) @@ -991,9 +975,6 @@ config_buf(enum usb_device_speed speed, u8 *buf, u8 type, unsigned index, } else { function = fs_printer_function; } -#else - function = fs_printer_function; -#endif if (index >= device_desc.bNumConfigurations) return -EINVAL; @@ -1138,7 +1119,6 @@ printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) value = min(wLength, (u16) sizeof device_desc); memcpy(req->buf, &device_desc, value); break; -#ifdef CONFIG_USB_GADGET_DUALSPEED case USB_DT_DEVICE_QUALIFIER: if (!gadget_is_dualspeed(gadget)) break; @@ -1157,7 +1137,6 @@ printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) if (!gadget_is_dualspeed(gadget)) break; /* FALLTHROUGH */ -#endif /* CONFIG_USB_GADGET_DUALSPEED */ case USB_DT_CONFIG: value = config_buf(gadget->speed, req->buf, wValue >> 8, @@ -1442,11 +1421,9 @@ autoconf_fail: goto autoconf_fail; out_ep->driver_data = out_ep; /* claim */ -#ifdef CONFIG_USB_GADGET_DUALSPEED /* assumes that all endpoints are dual-speed */ hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; -#endif /* DUALSPEED */ usb_gadget_set_selfpowered(gadget); @@ -1534,7 +1511,7 @@ fail: /*-------------------------------------------------------------------------*/ static struct usb_gadget_driver printer_driver = { - .max_speed = DEVSPEED, + .max_speed = USB_SPEED_HIGH, .function = (char *) driver_desc, .unbind = printer_unbind, -- cgit v0.10.2 From 2e87edf4922795f5e5e5be7934a36b6ff331022d Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sat, 4 Feb 2012 18:55:20 +0100 Subject: usb: gadget: make g_printer use composite This patch converts the g_printer to make use of the compoiste framework for descriptor parsing instead of its own implementation of it. This gadget contains now one function which is the printer gadget. Compile tested only. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index daef274..f1f9290 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -51,6 +51,7 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ +#include "composite.c" #include "usbstring.c" #include "config.c" #include "epautoconf.c" @@ -75,8 +76,6 @@ struct printer_dev { /* lock buffer lists during read/write calls */ struct mutex lock_printer_io; struct usb_gadget *gadget; - struct usb_request *req; /* for control responses */ - u8 config; s8 interface; struct usb_ep *in_ep, *out_ep; @@ -100,6 +99,7 @@ struct printer_dev { struct device *pdev; u8 printer_cdev_open; wait_queue_head_t wait; + struct usb_function function; }; static struct printer_dev usb_printer_gadget; @@ -120,26 +120,6 @@ static struct printer_dev usb_printer_gadget; * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ -static ushort idVendor; -module_param(idVendor, ushort, S_IRUGO); -MODULE_PARM_DESC(idVendor, "USB Vendor ID"); - -static ushort idProduct; -module_param(idProduct, ushort, S_IRUGO); -MODULE_PARM_DESC(idProduct, "USB Product ID"); - -static ushort bcdDevice; -module_param(bcdDevice, ushort, S_IRUGO); -MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); - -static char *iManufacturer; -module_param(iManufacturer, charp, S_IRUGO); -MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); - -static char *iProduct; -module_param(iProduct, charp, S_IRUGO); -MODULE_PARM_DESC(iProduct, "USB Product string"); - static char *iSerialNum; module_param(iSerialNum, charp, S_IRUGO); MODULE_PARM_DESC(iSerialNum, "1"); @@ -156,39 +136,6 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR); /*-------------------------------------------------------------------------*/ -#define xprintk(d, level, fmt, args...) \ - printk(level "%s: " fmt, DRIVER_DESC, ## args) - -#ifdef DEBUG -#define DBG(dev, fmt, args...) \ - xprintk(dev, KERN_DEBUG, fmt, ## args) -#else -#define DBG(dev, fmt, args...) \ - do { } while (0) -#endif /* DEBUG */ - -#ifdef VERBOSE -#define VDBG(dev, fmt, args...) \ - xprintk(dev, KERN_DEBUG, fmt, ## args) -#else -#define VDBG(dev, fmt, args...) \ - do { } while (0) -#endif /* VERBOSE */ - -#define ERROR(dev, fmt, args...) \ - xprintk(dev, KERN_ERR, fmt, ## args) -#define WARNING(dev, fmt, args...) \ - xprintk(dev, KERN_WARNING, fmt, ## args) -#define INFO(dev, fmt, args...) \ - xprintk(dev, KERN_INFO, fmt, ## args) - -/*-------------------------------------------------------------------------*/ - -/* USB DRIVER HOOKUP (to the hardware driver, below us), mostly - * ep0 implementation: descriptors, config management, setup(). - * also optional class-specific notification interrupt transfer. - */ - /* * DESCRIPTORS ... most are static, but strings and (full) configuration * descriptors are built on demand. @@ -221,24 +168,6 @@ static struct usb_device_descriptor device_desc = { .bNumConfigurations = 1 }; -static struct usb_otg_descriptor otg_desc = { - .bLength = sizeof otg_desc, - .bDescriptorType = USB_DT_OTG, - .bmAttributes = USB_OTG_SRP -}; - -static struct usb_config_descriptor config_desc = { - .bLength = sizeof config_desc, - .bDescriptorType = USB_DT_CONFIG, - - /* compute wTotalLength on the fly */ - .bNumInterfaces = 1, - .bConfigurationValue = DEV_CONFIG_VALUE, - .iConfiguration = 0, - .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, - .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, -}; - static struct usb_interface_descriptor intf_desc = { .bLength = sizeof intf_desc, .bDescriptorType = USB_DT_INTERFACE, @@ -264,8 +193,7 @@ static struct usb_endpoint_descriptor fs_ep_out_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK }; -static const struct usb_descriptor_header *fs_printer_function [11] = { - (struct usb_descriptor_header *) &otg_desc, +static struct usb_descriptor_header *fs_printer_function[] = { (struct usb_descriptor_header *) &intf_desc, (struct usb_descriptor_header *) &fs_ep_in_desc, (struct usb_descriptor_header *) &fs_ep_out_desc, @@ -299,14 +227,24 @@ static struct usb_qualifier_descriptor dev_qualifier = { .bNumConfigurations = 1 }; -static const struct usb_descriptor_header *hs_printer_function [11] = { - (struct usb_descriptor_header *) &otg_desc, +static struct usb_descriptor_header *hs_printer_function[] = { (struct usb_descriptor_header *) &intf_desc, (struct usb_descriptor_header *) &hs_ep_in_desc, (struct usb_descriptor_header *) &hs_ep_out_desc, NULL }; +static struct usb_otg_descriptor otg_descriptor = { + .bLength = sizeof otg_descriptor, + .bDescriptorType = USB_DT_OTG, + .bmAttributes = USB_OTG_SRP, +}; + +static const struct usb_descriptor_header *otg_desc[] = { + (struct usb_descriptor_header *) &otg_descriptor, + NULL, +}; + /* maxpacket and other transfer characteristics vary by speed. */ #define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs)) @@ -328,11 +266,16 @@ static struct usb_string strings [] = { { } /* end of list */ }; -static struct usb_gadget_strings stringtab = { +static struct usb_gadget_strings stringtab_dev = { .language = 0x0409, /* en-us */ .strings = strings, }; +static struct usb_gadget_strings *dev_strings[] = { + &stringtab_dev, + NULL, +}; + /*-------------------------------------------------------------------------*/ static struct usb_request * @@ -922,78 +865,8 @@ static void printer_reset_interface(struct printer_dev *dev) dev->interface = -1; } -/* change our operational config. must agree with the code - * that returns config descriptors, and altsetting code. - */ -static int -printer_set_config(struct printer_dev *dev, unsigned number) -{ - int result = 0; - struct usb_gadget *gadget = dev->gadget; - - switch (number) { - case DEV_CONFIG_VALUE: - result = 0; - break; - default: - result = -EINVAL; - /* FALL THROUGH */ - case 0: - break; - } - - if (result) { - usb_gadget_vbus_draw(dev->gadget, - dev->gadget->is_otg ? 8 : 100); - } else { - unsigned power; - - power = 2 * config_desc.bMaxPower; - usb_gadget_vbus_draw(dev->gadget, power); - - dev->config = number; - INFO(dev, "%s config #%d: %d mA, %s\n", - usb_speed_string(gadget->speed), - number, power, driver_desc); - } - return result; -} - -static int -config_buf(enum usb_device_speed speed, u8 *buf, u8 type, unsigned index, - int is_otg) -{ - int len; - const struct usb_descriptor_header **function; - int hs = (speed == USB_SPEED_HIGH); - - if (type == USB_DT_OTHER_SPEED_CONFIG) - hs = !hs; - - if (hs) { - function = hs_printer_function; - } else { - function = fs_printer_function; - } - - if (index >= device_desc.bNumConfigurations) - return -EINVAL; - - /* for now, don't advertise srp-only devices */ - if (!is_otg) - function++; - - len = usb_gadget_config_buf(&config_desc, buf, USB_DESC_BUFSIZE, - function); - if (len < 0) - return len; - ((struct usb_config_descriptor *) buf)->bDescriptorType = type; - return len; -} - /* Change our operational Interface. */ -static int -set_interface(struct printer_dev *dev, unsigned number) +static int set_interface(struct printer_dev *dev, unsigned number) { int result = 0; @@ -1024,14 +897,6 @@ set_interface(struct printer_dev *dev, unsigned number) return result; } -static void printer_setup_complete(struct usb_ep *ep, struct usb_request *req) -{ - if (req->status || req->actual != req->length) - DBG((struct printer_dev *) ep->driver_data, - "setup complete --> %d, %d/%d\n", - req->status, req->actual, req->length); -} - static void printer_soft_reset(struct printer_dev *dev) { struct usb_request *req; @@ -1088,11 +953,12 @@ static void printer_soft_reset(struct printer_dev *dev) * The setup() callback implements all the ep0 functionality that's not * handled lower down. */ -static int -printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) +static int printer_func_setup(struct usb_function *f, + const struct usb_ctrlrequest *ctrl) { - struct printer_dev *dev = get_gadget_data(gadget); - struct usb_request *req = dev->req; + struct printer_dev *dev = container_of(f, struct printer_dev, function); + struct usb_composite_dev *cdev = f->config->cdev; + struct usb_request *req = cdev->req; int value = -EOPNOTSUPP; u16 wIndex = le16_to_cpu(ctrl->wIndex); u16 wValue = le16_to_cpu(ctrl->wValue); @@ -1101,100 +967,7 @@ printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); - req->complete = printer_setup_complete; - switch (ctrl->bRequestType&USB_TYPE_MASK) { - - case USB_TYPE_STANDARD: - switch (ctrl->bRequest) { - - case USB_REQ_GET_DESCRIPTOR: - if (ctrl->bRequestType != USB_DIR_IN) - break; - switch (wValue >> 8) { - - case USB_DT_DEVICE: - device_desc.bMaxPacketSize0 = - gadget->ep0->maxpacket; - value = min(wLength, (u16) sizeof device_desc); - memcpy(req->buf, &device_desc, value); - break; - case USB_DT_DEVICE_QUALIFIER: - if (!gadget_is_dualspeed(gadget)) - break; - /* - * assumes ep0 uses the same value for both - * speeds - */ - dev_qualifier.bMaxPacketSize0 = - gadget->ep0->maxpacket; - value = min(wLength, - (u16) sizeof dev_qualifier); - memcpy(req->buf, &dev_qualifier, value); - break; - - case USB_DT_OTHER_SPEED_CONFIG: - if (!gadget_is_dualspeed(gadget)) - break; - /* FALLTHROUGH */ - case USB_DT_CONFIG: - value = config_buf(gadget->speed, req->buf, - wValue >> 8, - wValue & 0xff, - gadget->is_otg); - if (value >= 0) - value = min(wLength, (u16) value); - break; - - case USB_DT_STRING: - value = usb_gadget_get_string(&stringtab, - wValue & 0xff, req->buf); - if (value >= 0) - value = min(wLength, (u16) value); - break; - } - break; - - case USB_REQ_SET_CONFIGURATION: - if (ctrl->bRequestType != 0) - break; - if (gadget->a_hnp_support) - DBG(dev, "HNP available\n"); - else if (gadget->a_alt_hnp_support) - DBG(dev, "HNP needs a different root port\n"); - value = printer_set_config(dev, wValue); - if (!value) - value = set_interface(dev, PRINTER_INTERFACE); - break; - case USB_REQ_GET_CONFIGURATION: - if (ctrl->bRequestType != USB_DIR_IN) - break; - *(u8 *)req->buf = dev->config; - value = min(wLength, (u16) 1); - break; - - case USB_REQ_SET_INTERFACE: - if (ctrl->bRequestType != USB_RECIP_INTERFACE || - !dev->config) - break; - - value = set_interface(dev, PRINTER_INTERFACE); - break; - case USB_REQ_GET_INTERFACE: - if (ctrl->bRequestType != - (USB_DIR_IN|USB_RECIP_INTERFACE) - || !dev->config) - break; - - *(u8 *)req->buf = dev->interface; - value = min(wLength, (u16) 1); - break; - - default: - goto unknown; - } - break; - case USB_TYPE_CLASS: switch (ctrl->bRequest) { case 0: /* Get the IEEE-1284 PNP String */ @@ -1240,44 +1013,50 @@ unknown: wValue, wIndex, wLength); break; } - - /* respond with data transfer before status phase? */ - if (value >= 0) { - req->length = value; - req->zero = value < wLength; - value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); - if (value < 0) { - DBG(dev, "ep_queue --> %d\n", value); - req->status = 0; - printer_setup_complete(gadget->ep0, req); - } - } - /* host either stalls (value < 0) or reports success */ return value; } -static void -printer_disconnect(struct usb_gadget *gadget) +static int __init printer_func_bind(struct usb_configuration *c, + struct usb_function *f) +{ + return 0; +} + +static void printer_func_unbind(struct usb_configuration *c, + struct usb_function *f) +{ +} + +static int printer_func_set_alt(struct usb_function *f, + unsigned intf, unsigned alt) { - struct printer_dev *dev = get_gadget_data(gadget); + struct printer_dev *dev = container_of(f, struct printer_dev, function); + int ret = -ENOTSUPP; + + if (!alt) + ret = set_interface(dev, PRINTER_INTERFACE); + return ret; +} + +static void printer_func_disable(struct usb_function *f) +{ + struct printer_dev *dev = container_of(f, struct printer_dev, function); unsigned long flags; DBG(dev, "%s\n", __func__); spin_lock_irqsave(&dev->lock, flags); - printer_reset_interface(dev); - spin_unlock_irqrestore(&dev->lock, flags); } -static void -printer_unbind(struct usb_gadget *gadget) +static void printer_cfg_unbind(struct usb_configuration *c) { - struct printer_dev *dev = get_gadget_data(gadget); + struct printer_dev *dev; struct usb_request *req; + dev = &usb_printer_gadget; DBG(dev, "%s\n", __func__); @@ -1315,18 +1094,18 @@ printer_unbind(struct usb_gadget *gadget) list_del(&req->list); printer_req_free(dev->out_ep, req); } - - if (dev->req) { - printer_req_free(gadget->ep0, dev->req); - dev->req = NULL; - } - - set_gadget_data(gadget, NULL); } -static int __init -printer_bind(struct usb_gadget *gadget) +static struct usb_configuration printer_cfg_driver = { + .label = "printer", + .unbind = printer_cfg_unbind, + .bConfigurationValue = 1, + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, +}; + +static int __init printer_bind_config(struct usb_configuration *c) { + struct usb_gadget *gadget = c->cdev->gadget; struct printer_dev *dev; struct usb_ep *in_ep, *out_ep; int status = -ENOMEM; @@ -1337,6 +1116,14 @@ printer_bind(struct usb_gadget *gadget) dev = &usb_printer_gadget; + dev->function.name = shortname; + dev->function.descriptors = fs_printer_function; + dev->function.hs_descriptors = hs_printer_function; + dev->function.bind = printer_func_bind; + dev->function.setup = printer_func_setup; + dev->function.unbind = printer_func_unbind; + dev->function.set_alt = printer_func_set_alt; + dev->function.disable = printer_func_disable; /* Setup the sysfs files for the printer gadget. */ dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno, @@ -1372,29 +1159,6 @@ printer_bind(struct usb_gadget *gadget) init_utsname()->sysname, init_utsname()->release, gadget->name); - device_desc.idVendor = - cpu_to_le16(PRINTER_VENDOR_NUM); - device_desc.idProduct = - cpu_to_le16(PRINTER_PRODUCT_NUM); - - /* support optional vendor/distro customization */ - if (idVendor) { - if (!idProduct) { - dev_err(&gadget->dev, "idVendor needs idProduct!\n"); - return -ENODEV; - } - device_desc.idVendor = cpu_to_le16(idVendor); - device_desc.idProduct = cpu_to_le16(idProduct); - if (bcdDevice) - device_desc.bcdDevice = cpu_to_le16(bcdDevice); - } - - if (iManufacturer) - strlcpy(manufacturer, iManufacturer, sizeof manufacturer); - - if (iProduct) - strlcpy(product_desc, iProduct, sizeof product_desc); - if (iSerialNum) strlcpy(serial_num, iSerialNum, sizeof serial_num); @@ -1428,8 +1192,9 @@ autoconf_fail: usb_gadget_set_selfpowered(gadget); if (gadget->is_otg) { - otg_desc.bmAttributes |= USB_OTG_HNP, - config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + otg_descriptor.bmAttributes |= USB_OTG_HNP; + printer_cfg_driver.descriptors = otg_desc; + printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; } spin_lock_init(&dev->lock); @@ -1443,7 +1208,6 @@ autoconf_fail: init_waitqueue_head(&dev->tx_wait); init_waitqueue_head(&dev->tx_flush_wait); - dev->config = 0; dev->interface = -1; dev->printer_cdev_open = 0; dev->printer_status = PRINTER_NOT_ERROR; @@ -1454,14 +1218,6 @@ autoconf_fail: dev->in_ep = in_ep; dev->out_ep = out_ep; - /* preallocate control message data and buffer */ - dev->req = printer_req_alloc(gadget->ep0, USB_DESC_BUFSIZE, - GFP_KERNEL); - if (!dev->req) { - status = -ENOMEM; - goto fail; - } - for (i = 0; i < QLEN; i++) { req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL); if (!req) { @@ -1490,45 +1246,37 @@ autoconf_fail: list_add(&req->list, &dev->rx_reqs); } - dev->req->complete = printer_setup_complete; - /* finish hookup to lower layer ... */ dev->gadget = gadget; - set_gadget_data(gadget, dev); - gadget->ep0->driver_data = dev; INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc); INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name, in_ep->name); - return 0; fail: - printer_unbind(gadget); + printer_cfg_unbind(c); return status; } -/*-------------------------------------------------------------------------*/ +static int printer_unbind(struct usb_composite_dev *cdev) +{ + return 0; +} -static struct usb_gadget_driver printer_driver = { - .max_speed = USB_SPEED_HIGH, +static int __init printer_bind(struct usb_composite_dev *cdev) +{ + return usb_add_config(cdev, &printer_cfg_driver, printer_bind_config); +} - .function = (char *) driver_desc, +static struct usb_composite_driver printer_driver = { + .name = shortname, + .dev = &device_desc, + .strings = dev_strings, + .max_speed = USB_SPEED_HIGH, .unbind = printer_unbind, - - .setup = printer_setup, - .disconnect = printer_disconnect, - - .driver = { - .name = (char *) shortname, - .owner = THIS_MODULE, - }, }; -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Craig Nadler"); -MODULE_LICENSE("GPL"); - static int __init init(void) { @@ -1537,23 +1285,23 @@ init(void) usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget"); if (IS_ERR(usb_gadget_class)) { status = PTR_ERR(usb_gadget_class); - ERROR(dev, "unable to create usb_gadget class %d\n", status); + pr_err("unable to create usb_gadget class %d\n", status); return status; } status = alloc_chrdev_region(&g_printer_devno, 0, 1, "USB printer gadget"); if (status) { - ERROR(dev, "alloc_chrdev_region %d\n", status); + pr_err("alloc_chrdev_region %d\n", status); class_destroy(usb_gadget_class); return status; } - status = usb_gadget_probe_driver(&printer_driver, printer_bind); + status = usb_composite_probe(&printer_driver, printer_bind); if (status) { class_destroy(usb_gadget_class); unregister_chrdev_region(g_printer_devno, 1); - DBG(dev, "usb_gadget_probe_driver %x\n", status); + pr_err("usb_gadget_probe_driver %x\n", status); } return status; @@ -1563,15 +1311,14 @@ module_init(init); static void __exit cleanup(void) { - int status; - mutex_lock(&usb_printer_gadget.lock_printer_io); - status = usb_gadget_unregister_driver(&printer_driver); - if (status) - ERROR(dev, "usb_gadget_unregister_driver %x\n", status); - + usb_composite_unregister(&printer_driver); unregister_chrdev_region(g_printer_devno, 1); class_destroy(usb_gadget_class); mutex_unlock(&usb_printer_gadget.lock_printer_io); } module_exit(cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Craig Nadler"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From f99987bb261ed80f645ed0acd13732922ca10138 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 9 Feb 2012 09:24:59 +0100 Subject: usb: gadget: dummy_hcd: allow to free requests on disabled endpoints ep->desc is set to NULL on endpoint disable. That means once an endpoint is disabled it is not possible to free requests. In my target gadget I first disable endpoints to make sure I have no requests on the fly and then free frequests. On dummy I am leaking memory here. Since I can't imagine a reason why it should be a bad thing, lets allow to free requests on disabled endpoints. On removal of composite the ep0 request is removed so lets allow that here as well. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index a6dfd21..af063cb 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -595,14 +595,12 @@ static struct usb_request *dummy_alloc_request(struct usb_ep *_ep, static void dummy_free_request(struct usb_ep *_ep, struct usb_request *_req) { - struct dummy_ep *ep; struct dummy_request *req; - if (!_ep || !_req) - return; - ep = usb_ep_to_dummy_ep(_ep); - if (!ep->desc && _ep->name != ep0name) + if (!_ep || !_req) { + __WARN(); return; + } req = usb_request_to_dummy_request(_req); WARN_ON(!list_empty(&req->queue)); -- cgit v0.10.2 From cac402dd0832e9c63929eff70d6766cd8623e5fc Mon Sep 17 00:00:00 2001 From: "Shimoda, Yoshihiro" Date: Fri, 16 Mar 2012 13:10:15 +0900 Subject: usb: renesas_usbhs: gadget: add support for set_selfpowered The previous code always set to USB_DEVICE_SELF_POWERED in GET_STATUS. So, this patch adds set_selfpowered(). Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 00bd2a5..28478ce 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -55,6 +55,7 @@ struct usbhsg_gpriv { #define USBHSG_STATUS_STARTED (1 << 0) #define USBHSG_STATUS_REGISTERD (1 << 1) #define USBHSG_STATUS_WEDGE (1 << 2) +#define USBHSG_STATUS_SELF_POWERED (1 << 3) }; struct usbhsg_recip_handle { @@ -333,7 +334,10 @@ static int usbhsg_recip_handler_std_get_device(struct usbhs_priv *priv, struct usb_ctrlrequest *ctrl) { struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); - unsigned short status = 1 << USB_DEVICE_SELF_POWERED; + unsigned short status = 0; + + if (usbhsg_status_has(gpriv, USBHSG_STATUS_SELF_POWERED)) + status = 1 << USB_DEVICE_SELF_POWERED; __usbhsg_recip_send_status(gpriv, status); @@ -879,8 +883,21 @@ static int usbhsg_get_frame(struct usb_gadget *gadget) return usbhs_frame_get_num(priv); } +static int usbhsg_set_selfpowered(struct usb_gadget *gadget, int is_self) +{ + struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); + + if (is_self) + usbhsg_status_set(gpriv, USBHSG_STATUS_SELF_POWERED); + else + usbhsg_status_clr(gpriv, USBHSG_STATUS_SELF_POWERED); + + return 0; +} + static struct usb_gadget_ops usbhsg_gadget_ops = { .get_frame = usbhsg_get_frame, + .set_selfpowered = usbhsg_set_selfpowered, .udc_start = usbhsg_gadget_start, .udc_stop = usbhsg_gadget_stop, }; -- cgit v0.10.2 From c2484606a105e35a9bbbfafa41ee32683b82cf5a Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Fri, 16 Mar 2012 12:25:42 +0100 Subject: usb: gadget: f_mass_storage: remove deprecated fsg_add() There are no in-tree fsg_add() users and it has been deprecated since 2.6.35 [1dc90985d1: fsg_add() renamed to fsg_bind_config()] so out-of-tree users had more then enough time to convert. Removing. Signed-off-by: Michal Nazarewicz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index a371e96..47383f4 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -3110,13 +3110,6 @@ static int fsg_bind_config(struct usb_composite_dev *cdev, return rc; } -static inline int __deprecated __maybe_unused -fsg_add(struct usb_composite_dev *cdev, struct usb_configuration *c, - struct fsg_common *common) -{ - return fsg_bind_config(cdev, c, common); -} - /************************* Module parameters *************************/ -- cgit v0.10.2 From 124ef389256f71042ab5dedde98dee5e9999a635 Mon Sep 17 00:00:00 2001 From: Yongsul Oh Date: Tue, 20 Mar 2012 10:38:38 +0900 Subject: usb: gadget: composite: prevent a memory leak when configuration bind fails In some USB composite gadget drivers, the configuration's bind function called by the usb_add_config() calls multiple bind config functions. (for example cdc2 configuration bind function in the cdc_do_config() of the cdc2.c has two functionality bind config functions. - the ecm_bind_config() & the acm_bind_config()) In each functionality bind config function, new instance is allocated and finally added by the usb_add_function(). So if an error occurred during the second functionality bind config (for example an error occurred at the acm_bind_config() after succeeding of the ecm_bind_function()), the instance created by the acm_bind_config() cannot be freed creating a memory leak. This patch fixes this issue. Signed-off-by: Yongsul Oh Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index baaebf2..4cb1801 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -737,6 +737,19 @@ int usb_add_config(struct usb_composite_dev *cdev, status = bind(config); if (status < 0) { + while (!list_empty(&config->functions)) { + struct usb_function *f; + + f = list_first_entry(&config->functions, + struct usb_function, list); + list_del(&f->list); + if (f->unbind) { + DBG(cdev, "unbind function '%s'/%p\n", + f->name, f); + f->unbind(config, f); + /* may free memory for "f" */ + } + } list_del(&config->list); config->cdev = NULL; } else { -- cgit v0.10.2 From 4d0947dec4db1224354e2f6f00ae22ce38e62a43 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Sun, 1 Apr 2012 15:17:16 +0800 Subject: usb: gadget: fsl_udc_core: dTD's next dtd pointer need to be updated once written dTD's next dtd pointer need to be updated once CPU writes it, or this request may not be handled by controller, then host will get NAK from device forever. This problem occurs when there is a request is handling, we need to add a new request to dTD list, if this new request is added before the current one is finished, the new request is intended to added as next dtd pointer at current dTD, but without wmb(), the dTD's next dtd pointer may not be updated when the controller reads it. In that case, the controller will still get Terminate Bit is 1 at dTD's next dtd pointer, that means there is no next request, then this new request is missed by controller. CC: Signed-off-by: Peter Chen Acked-by: Li Yang Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 8f6fc70..5a52d42 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -735,6 +735,8 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) lastreq = list_entry(ep->queue.prev, struct fsl_req, queue); lastreq->tail->next_td_ptr = cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK); + /* Ensure dTD's next dtd pointer to be updated */ + wmb(); /* Read prime bit, if 1 goto done */ if (fsl_readl(&dr_regs->endpointprime) & bitmask) return; -- cgit v0.10.2 From 00c16f9f916eef8999065f72567c7cf08582517c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 9 Apr 2012 17:14:16 -0300 Subject: usb: gadget: Include i.MX processors in the USB_FSL_USB2 help text USB_FSL_USB2 driver can be used on PowerPC and i.MX processors. Include i.MX processors in the USB_FSL_USB2 help text. Signed-off-by: Fabio Estevam Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 2633f75..1f93861 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -161,7 +161,7 @@ config USB_FSL_USB2 select USB_GADGET_DUALSPEED select USB_FSL_MPH_DR_OF if OF help - Some of Freescale PowerPC processors have a High Speed + Some of Freescale PowerPC and i.MX processors have a High Speed Dual-Role(DR) USB controller, which supports device mode. The number of programmable endpoints is different through -- cgit v0.10.2 From 1ec9c8a299a4a45ab3e08ba594eec82c425d0918 Mon Sep 17 00:00:00 2001 From: "Shimoda, Yoshihiro" Date: Wed, 11 Apr 2012 18:51:28 +0900 Subject: usb: gadget: r8a66597-udc: add support for set_selfpowered The previous code always set to USB_DEVICE_SELF_POWERED in GET_STATUS. So, this patch adds set_selfpowered(). Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index b54152b..f3ac2a2 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1170,7 +1170,7 @@ __acquires(r8a66597->lock) switch (ctrl->bRequestType & USB_RECIP_MASK) { case USB_RECIP_DEVICE: - status = 1 << USB_DEVICE_SELF_POWERED; + status = r8a66597->device_status; break; case USB_RECIP_INTERFACE: status = 0; @@ -1800,11 +1800,24 @@ static int r8a66597_pullup(struct usb_gadget *gadget, int is_on) return 0; } +static int r8a66597_set_selfpowered(struct usb_gadget *gadget, int is_self) +{ + struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); + + if (is_self) + r8a66597->device_status |= 1 << USB_DEVICE_SELF_POWERED; + else + r8a66597->device_status &= ~(1 << USB_DEVICE_SELF_POWERED); + + return 0; +} + static struct usb_gadget_ops r8a66597_gadget_ops = { .get_frame = r8a66597_get_frame, .udc_start = r8a66597_start, .udc_stop = r8a66597_stop, .pullup = r8a66597_pullup, + .set_selfpowered = r8a66597_set_selfpowered, }; static int __exit r8a66597_remove(struct platform_device *pdev) diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h index 25eb132..99908c7 100644 --- a/drivers/usb/gadget/r8a66597-udc.h +++ b/drivers/usb/gadget/r8a66597-udc.h @@ -111,6 +111,7 @@ struct r8a66597 { u16 old_vbus; u16 scount; u16 old_dvsq; + u16 device_status; /* for GET_STATUS */ /* pipe config */ unsigned char bulk; -- cgit v0.10.2 From 20c5e74c7b47cefaf2cd0f84bdb4830b66452384 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 17 Apr 2012 09:30:22 +0300 Subject: usb: gadget: add a sparse endian notation The original code works fine, but Sparse complains because it isn't annotated properly. drivers/usb/gadget/composite.c:793:26: warning: incorrect type in assignment (different base types) drivers/usb/gadget/composite.c:793:26: expected unsigned short [unsigned] [usertype] language devel/drivers/usb/gadget/composite.c:793:26: got restricted __le16 [usertype] devel/drivers/usb/gadget/composite.c:795:29: warning: restricted __le16 degrades to integer drivers/usb/gadget/composite.c:798:24: warning: incorrect type in assignment (different base types) drivers/usb/gadget/composite.c:798:24: expected restricted __le16 [usertype] devel/drivers/usb/gadget/composite.c:798:24: got unsigned short [unsigned] [usertype] language Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 4cb1801..a3b19fe 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -798,7 +798,7 @@ done: static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf) { const struct usb_gadget_strings *s; - u16 language; + __le16 language; __le16 *tmp; while (*sp) { -- cgit v0.10.2 From b4036ccdd2ce5ec0c4f29b91312dd3cf19fc9152 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Mon, 16 Apr 2012 14:19:06 -0700 Subject: usb: gadget: add isochronous support to gadget zero Add two isochronous endpoints to the gadget zero source/sink function. They are enabled by selecting alternate interface 1, so by default they are not enabled. Module parameters for setting all the isoc endpoint characteristics are also provided. Signed-off-by: Pratyush Anand Signed-off-by: Paul Zimmerman Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c index 2c0cd82..7275706 100644 --- a/drivers/usb/gadget/f_loopback.c +++ b/drivers/usb/gadget/f_loopback.c @@ -286,7 +286,7 @@ static void disable_loopback(struct f_loopback *loop) struct usb_composite_dev *cdev; cdev = loop->function.config->cdev; - disable_endpoints(cdev, loop->in_ep, loop->out_ep); + disable_endpoints(cdev, loop->in_ep, loop->out_ep, NULL, NULL); VDBG(cdev, "%s disabled\n", loop->function.name); } @@ -329,7 +329,7 @@ fail0: * than 'buflen' bytes each. */ for (i = 0; i < qlen && result == 0; i++) { - req = alloc_ep_req(ep); + req = alloc_ep_req(ep, 0); if (req) { req->complete = loopback_complete; result = usb_ep_queue(ep, req, GFP_ATOMIC); diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index 7aa7ac8..5c1b68b 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -51,6 +51,9 @@ struct f_sourcesink { struct usb_ep *in_ep; struct usb_ep *out_ep; + struct usb_ep *iso_in_ep; + struct usb_ep *iso_out_ep; + int cur_alt; }; static inline struct f_sourcesink *func_to_ss(struct usb_function *f) @@ -59,18 +62,45 @@ static inline struct f_sourcesink *func_to_ss(struct usb_function *f) } static unsigned pattern; -module_param(pattern, uint, 0); -MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63 "); +module_param(pattern, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63, 2 = none"); + +static unsigned isoc_interval = 4; +module_param(isoc_interval, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(isoc_interval, "1 - 16"); + +static unsigned isoc_maxpacket = 1024; +module_param(isoc_maxpacket, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(isoc_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)"); + +static unsigned isoc_mult; +module_param(isoc_mult, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(isoc_mult, "0 - 2 (hs/ss only)"); + +static unsigned isoc_maxburst; +module_param(isoc_maxburst, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(isoc_maxburst, "0 - 15 (ss only)"); /*-------------------------------------------------------------------------*/ -static struct usb_interface_descriptor source_sink_intf = { - .bLength = sizeof source_sink_intf, +static struct usb_interface_descriptor source_sink_intf_alt0 = { + .bLength = USB_DT_INTERFACE_SIZE, .bDescriptorType = USB_DT_INTERFACE, + .bAlternateSetting = 0, .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - /* .iInterface = DYNAMIC */ + /* .iInterface = DYNAMIC */ +}; + +static struct usb_interface_descriptor source_sink_intf_alt1 = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + + .bAlternateSetting = 1, + .bNumEndpoints = 4, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + /* .iInterface = DYNAMIC */ }; /* full speed support: */ @@ -91,10 +121,36 @@ static struct usb_endpoint_descriptor fs_sink_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, }; +static struct usb_endpoint_descriptor fs_iso_source_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1023), + .bInterval = 4, +}; + +static struct usb_endpoint_descriptor fs_iso_sink_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1023), + .bInterval = 4, +}; + static struct usb_descriptor_header *fs_source_sink_descs[] = { - (struct usb_descriptor_header *) &source_sink_intf, + (struct usb_descriptor_header *) &source_sink_intf_alt0, (struct usb_descriptor_header *) &fs_sink_desc, (struct usb_descriptor_header *) &fs_source_desc, + (struct usb_descriptor_header *) &source_sink_intf_alt1, +#define FS_ALT_IFC_1_OFFSET 3 + (struct usb_descriptor_header *) &fs_sink_desc, + (struct usb_descriptor_header *) &fs_source_desc, + (struct usb_descriptor_header *) &fs_iso_sink_desc, + (struct usb_descriptor_header *) &fs_iso_source_desc, NULL, }; @@ -116,10 +172,34 @@ static struct usb_endpoint_descriptor hs_sink_desc = { .wMaxPacketSize = cpu_to_le16(512), }; +static struct usb_endpoint_descriptor hs_iso_source_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1024), + .bInterval = 4, +}; + +static struct usb_endpoint_descriptor hs_iso_sink_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1024), + .bInterval = 4, +}; + static struct usb_descriptor_header *hs_source_sink_descs[] = { - (struct usb_descriptor_header *) &source_sink_intf, + (struct usb_descriptor_header *) &source_sink_intf_alt0, (struct usb_descriptor_header *) &hs_source_desc, (struct usb_descriptor_header *) &hs_sink_desc, + (struct usb_descriptor_header *) &source_sink_intf_alt1, +#define HS_ALT_IFC_1_OFFSET 3 + (struct usb_descriptor_header *) &hs_source_desc, + (struct usb_descriptor_header *) &hs_sink_desc, + (struct usb_descriptor_header *) &hs_iso_source_desc, + (struct usb_descriptor_header *) &hs_iso_sink_desc, NULL, }; @@ -136,6 +216,7 @@ static struct usb_endpoint_descriptor ss_source_desc = { struct usb_ss_ep_comp_descriptor ss_source_comp_desc = { .bLength = USB_DT_SS_EP_COMP_SIZE, .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + .bMaxBurst = 0, .bmAttributes = 0, .wBytesPerInterval = 0, @@ -152,17 +233,64 @@ static struct usb_endpoint_descriptor ss_sink_desc = { struct usb_ss_ep_comp_descriptor ss_sink_comp_desc = { .bLength = USB_DT_SS_EP_COMP_SIZE, .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + .bMaxBurst = 0, .bmAttributes = 0, .wBytesPerInterval = 0, }; +static struct usb_endpoint_descriptor ss_iso_source_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1024), + .bInterval = 4, +}; + +struct usb_ss_ep_comp_descriptor ss_iso_source_comp_desc = { + .bLength = USB_DT_SS_EP_COMP_SIZE, + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + .bMaxBurst = 0, + .bmAttributes = 0, + .wBytesPerInterval = cpu_to_le16(1024), +}; + +static struct usb_endpoint_descriptor ss_iso_sink_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1024), + .bInterval = 4, +}; + +struct usb_ss_ep_comp_descriptor ss_iso_sink_comp_desc = { + .bLength = USB_DT_SS_EP_COMP_SIZE, + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + .bMaxBurst = 0, + .bmAttributes = 0, + .wBytesPerInterval = cpu_to_le16(1024), +}; + static struct usb_descriptor_header *ss_source_sink_descs[] = { - (struct usb_descriptor_header *) &source_sink_intf, + (struct usb_descriptor_header *) &source_sink_intf_alt0, (struct usb_descriptor_header *) &ss_source_desc, (struct usb_descriptor_header *) &ss_source_comp_desc, (struct usb_descriptor_header *) &ss_sink_desc, (struct usb_descriptor_header *) &ss_sink_comp_desc, + (struct usb_descriptor_header *) &source_sink_intf_alt1, +#define SS_ALT_IFC_1_OFFSET 5 + (struct usb_descriptor_header *) &ss_source_desc, + (struct usb_descriptor_header *) &ss_source_comp_desc, + (struct usb_descriptor_header *) &ss_sink_desc, + (struct usb_descriptor_header *) &ss_sink_comp_desc, + (struct usb_descriptor_header *) &ss_iso_source_desc, + (struct usb_descriptor_header *) &ss_iso_source_comp_desc, + (struct usb_descriptor_header *) &ss_iso_sink_desc, + (struct usb_descriptor_header *) &ss_iso_sink_comp_desc, NULL, }; @@ -196,9 +324,10 @@ sourcesink_bind(struct usb_configuration *c, struct usb_function *f) id = usb_interface_id(c, f); if (id < 0) return id; - source_sink_intf.bInterfaceNumber = id; + source_sink_intf_alt0.bInterfaceNumber = id; + source_sink_intf_alt1.bInterfaceNumber = id; - /* allocate endpoints */ + /* allocate bulk endpoints */ ss->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_source_desc); if (!ss->in_ep) { autoconf_fail: @@ -213,12 +342,74 @@ autoconf_fail: goto autoconf_fail; ss->out_ep->driver_data = cdev; /* claim */ + /* sanity check the isoc module parameters */ + if (isoc_interval < 1) + isoc_interval = 1; + if (isoc_interval > 16) + isoc_interval = 16; + if (isoc_mult > 2) + isoc_mult = 2; + if (isoc_maxburst > 15) + isoc_maxburst = 15; + + /* fill in the FS isoc descriptors from the module parameters */ + fs_iso_source_desc.wMaxPacketSize = isoc_maxpacket > 1023 ? + 1023 : isoc_maxpacket; + fs_iso_source_desc.bInterval = isoc_interval; + fs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket > 1023 ? + 1023 : isoc_maxpacket; + fs_iso_sink_desc.bInterval = isoc_interval; + + /* allocate iso endpoints */ + ss->iso_in_ep = usb_ep_autoconfig(cdev->gadget, &fs_iso_source_desc); + if (!ss->iso_in_ep) + goto no_iso; + ss->iso_in_ep->driver_data = cdev; /* claim */ + + ss->iso_out_ep = usb_ep_autoconfig(cdev->gadget, &fs_iso_sink_desc); + if (ss->iso_out_ep) { + ss->iso_out_ep->driver_data = cdev; /* claim */ + } else { + ss->iso_in_ep->driver_data = NULL; + ss->iso_in_ep = NULL; +no_iso: + /* + * We still want to work even if the UDC doesn't have isoc + * endpoints, so null out the alt interface that contains + * them and continue. + */ + fs_source_sink_descs[FS_ALT_IFC_1_OFFSET] = NULL; + hs_source_sink_descs[HS_ALT_IFC_1_OFFSET] = NULL; + ss_source_sink_descs[SS_ALT_IFC_1_OFFSET] = NULL; + } + + if (isoc_maxpacket > 1024) + isoc_maxpacket = 1024; + /* support high speed hardware */ if (gadget_is_dualspeed(c->cdev->gadget)) { hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; + + /* + * Fill in the HS isoc descriptors from the module parameters. + * We assume that the user knows what they are doing and won't + * give parameters that their UDC doesn't support. + */ + hs_iso_source_desc.wMaxPacketSize = isoc_maxpacket; + hs_iso_source_desc.wMaxPacketSize |= isoc_mult << 11; + hs_iso_source_desc.bInterval = isoc_interval; + hs_iso_source_desc.bEndpointAddress = + fs_iso_source_desc.bEndpointAddress; + + hs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket; + hs_iso_sink_desc.wMaxPacketSize |= isoc_mult << 11; + hs_iso_sink_desc.bInterval = isoc_interval; + hs_iso_sink_desc.bEndpointAddress = + fs_iso_sink_desc.bEndpointAddress; + f->hs_descriptors = hs_source_sink_descs; } @@ -228,13 +419,39 @@ autoconf_fail: fs_source_desc.bEndpointAddress; ss_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; + + /* + * Fill in the SS isoc descriptors from the module parameters. + * We assume that the user knows what they are doing and won't + * give parameters that their UDC doesn't support. + */ + ss_iso_source_desc.wMaxPacketSize = isoc_maxpacket; + ss_iso_source_desc.bInterval = isoc_interval; + ss_iso_source_comp_desc.bmAttributes = isoc_mult; + ss_iso_source_comp_desc.bMaxBurst = isoc_maxburst; + ss_iso_source_comp_desc.wBytesPerInterval = + isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1); + ss_iso_source_desc.bEndpointAddress = + fs_iso_source_desc.bEndpointAddress; + + ss_iso_sink_desc.wMaxPacketSize = isoc_maxpacket; + ss_iso_sink_desc.bInterval = isoc_interval; + ss_iso_sink_comp_desc.bmAttributes = isoc_mult; + ss_iso_sink_comp_desc.bMaxBurst = isoc_maxburst; + ss_iso_sink_comp_desc.wBytesPerInterval = + isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1); + ss_iso_sink_desc.bEndpointAddress = + fs_iso_sink_desc.bEndpointAddress; + f->ss_descriptors = ss_source_sink_descs; } - DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n", + DBG(cdev, "%s speed %s: IN/%s, OUT/%s, ISO-IN/%s, ISO-OUT/%s\n", (gadget_is_superspeed(c->cdev->gadget) ? "super" : (gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full")), - f->name, ss->in_ep->name, ss->out_ep->name); + f->name, ss->in_ep->name, ss->out_ep->name, + ss->iso_in_ep ? ss->iso_in_ep->name : "", + ss->iso_out_ep ? ss->iso_out_ep->name : ""); return 0; } @@ -251,6 +468,9 @@ static int check_read_data(struct f_sourcesink *ss, struct usb_request *req) u8 *buf = req->buf; struct usb_composite_dev *cdev = ss->function.config->cdev; + if (pattern == 2) + return 0; + for (i = 0; i < req->actual; i++, buf++) { switch (pattern) { @@ -265,7 +485,7 @@ static int check_read_data(struct f_sourcesink *ss, struct usb_request *req) * each usb transfer request should be. Resync is done * with set_interface or set_config. (We *WANT* it to * get quickly out of sync if controllers or their drivers - * stutter for any reason, including buffer duplcation...) + * stutter for any reason, including buffer duplication...) */ case 1: if (*buf == (u8)(i % 63)) @@ -292,21 +512,30 @@ static void reinit_write_data(struct usb_ep *ep, struct usb_request *req) for (i = 0; i < req->length; i++) *buf++ = (u8) (i % 63); break; + case 2: + break; } } static void source_sink_complete(struct usb_ep *ep, struct usb_request *req) { - struct f_sourcesink *ss = ep->driver_data; - struct usb_composite_dev *cdev = ss->function.config->cdev; - int status = req->status; + struct usb_composite_dev *cdev; + struct f_sourcesink *ss = ep->driver_data; + int status = req->status; + + /* driver_data will be null if ep has been disabled */ + if (!ss) + return; + + cdev = ss->function.config->cdev; switch (status) { case 0: /* normal completion? */ if (ep == ss->out_ep) { check_read_data(ss, req); - memset(req->buf, 0x55, req->length); + if (pattern != 2) + memset(req->buf, 0x55, req->length); } else reinit_write_data(ep, req); break; @@ -344,32 +573,57 @@ static void source_sink_complete(struct usb_ep *ep, struct usb_request *req) } } -static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in) +static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in, + bool is_iso, int speed) { struct usb_ep *ep; struct usb_request *req; - int status; + int i, size, status; + + for (i = 0; i < 8; i++) { + if (is_iso) { + switch (speed) { + case USB_SPEED_SUPER: + size = isoc_maxpacket * (isoc_mult + 1) * + (isoc_maxburst + 1); + break; + case USB_SPEED_HIGH: + size = isoc_maxpacket * (isoc_mult + 1); + break; + default: + size = isoc_maxpacket > 1023 ? + 1023 : isoc_maxpacket; + break; + } + ep = is_in ? ss->iso_in_ep : ss->iso_out_ep; + req = alloc_ep_req(ep, size); + } else { + ep = is_in ? ss->in_ep : ss->out_ep; + req = alloc_ep_req(ep, 0); + } - ep = is_in ? ss->in_ep : ss->out_ep; - req = alloc_ep_req(ep); - if (!req) - return -ENOMEM; + if (!req) + return -ENOMEM; - req->complete = source_sink_complete; - if (is_in) - reinit_write_data(ep, req); - else - memset(req->buf, 0x55, req->length); + req->complete = source_sink_complete; + if (is_in) + reinit_write_data(ep, req); + else if (pattern != 2) + memset(req->buf, 0x55, req->length); - status = usb_ep_queue(ep, req, GFP_ATOMIC); - if (status) { - struct usb_composite_dev *cdev; + status = usb_ep_queue(ep, req, GFP_ATOMIC); + if (status) { + struct usb_composite_dev *cdev; - cdev = ss->function.config->cdev; - ERROR(cdev, "start %s %s --> %d\n", - is_in ? "IN" : "OUT", - ep->name, status); - free_ep_req(ep, req); + cdev = ss->function.config->cdev; + ERROR(cdev, "start %s%s %s --> %d\n", + is_iso ? "ISO-" : "", is_in ? "IN" : "OUT", + ep->name, status); + free_ep_req(ep, req); + } + + if (!is_iso) + break; } return status; @@ -380,17 +634,20 @@ static void disable_source_sink(struct f_sourcesink *ss) struct usb_composite_dev *cdev; cdev = ss->function.config->cdev; - disable_endpoints(cdev, ss->in_ep, ss->out_ep); + disable_endpoints(cdev, ss->in_ep, ss->out_ep, ss->iso_in_ep, + ss->iso_out_ep); VDBG(cdev, "%s disabled\n", ss->function.name); } static int -enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss) +enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss, + int alt) { int result = 0; + int speed = cdev->gadget->speed; struct usb_ep *ep; - /* one endpoint writes (sources) zeroes IN (to the host) */ + /* one bulk endpoint writes (sources) zeroes IN (to the host) */ ep = ss->in_ep; result = config_ep_by_speed(cdev->gadget, &(ss->function), ep); if (result) @@ -400,7 +657,7 @@ enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss) return result; ep->driver_data = ss; - result = source_sink_start_ep(ss, true); + result = source_sink_start_ep(ss, true, false, speed); if (result < 0) { fail: ep = ss->in_ep; @@ -409,7 +666,7 @@ fail: return result; } - /* one endpoint reads (sinks) anything OUT (from the host) */ + /* one bulk endpoint reads (sinks) anything OUT (from the host) */ ep = ss->out_ep; result = config_ep_by_speed(cdev->gadget, &(ss->function), ep); if (result) @@ -419,27 +676,82 @@ fail: goto fail; ep->driver_data = ss; - result = source_sink_start_ep(ss, false); + result = source_sink_start_ep(ss, false, false, speed); if (result < 0) { +fail2: + ep = ss->out_ep; usb_ep_disable(ep); ep->driver_data = NULL; goto fail; } - DBG(cdev, "%s enabled\n", ss->function.name); + if (alt == 0) + goto out; + + /* one iso endpoint writes (sources) zeroes IN (to the host) */ + ep = ss->iso_in_ep; + if (ep) { + result = config_ep_by_speed(cdev->gadget, &(ss->function), ep); + if (result) + goto fail2; + result = usb_ep_enable(ep); + if (result < 0) + goto fail2; + ep->driver_data = ss; + + result = source_sink_start_ep(ss, true, true, speed); + if (result < 0) { +fail3: + ep = ss->iso_in_ep; + if (ep) { + usb_ep_disable(ep); + ep->driver_data = NULL; + } + goto fail2; + } + } + + /* one iso endpoint reads (sinks) anything OUT (from the host) */ + ep = ss->iso_out_ep; + if (ep) { + result = config_ep_by_speed(cdev->gadget, &(ss->function), ep); + if (result) + goto fail3; + result = usb_ep_enable(ep); + if (result < 0) + goto fail3; + ep->driver_data = ss; + + result = source_sink_start_ep(ss, false, true, speed); + if (result < 0) { + usb_ep_disable(ep); + ep->driver_data = NULL; + goto fail3; + } + } +out: + ss->cur_alt = alt; + + DBG(cdev, "%s enabled, alt intf %d\n", ss->function.name, alt); return result; } static int sourcesink_set_alt(struct usb_function *f, unsigned intf, unsigned alt) { - struct f_sourcesink *ss = func_to_ss(f); - struct usb_composite_dev *cdev = f->config->cdev; + struct f_sourcesink *ss = func_to_ss(f); + struct usb_composite_dev *cdev = f->config->cdev; - /* we know alt is zero */ if (ss->in_ep->driver_data) disable_source_sink(ss); - return enable_source_sink(cdev, ss); + return enable_source_sink(cdev, ss, alt); +} + +static int sourcesink_get_alt(struct usb_function *f, unsigned intf) +{ + struct f_sourcesink *ss = func_to_ss(f); + + return ss->cur_alt; } static void sourcesink_disable(struct usb_function *f) @@ -465,6 +777,7 @@ static int __init sourcesink_bind_config(struct usb_configuration *c) ss->function.bind = sourcesink_bind; ss->function.unbind = sourcesink_unbind; ss->function.set_alt = sourcesink_set_alt; + ss->function.get_alt = sourcesink_get_alt; ss->function.disable = sourcesink_disable; status = usb_add_function(c, &ss->function); @@ -536,7 +849,7 @@ unknown: req->length = value; value = usb_ep_queue(c->cdev->gadget->ep0, req, GFP_ATOMIC); if (value < 0) - ERROR(c->cdev, "source/sinkc response, err %d\n", + ERROR(c->cdev, "source/sink response, err %d\n", value); } @@ -545,12 +858,12 @@ unknown: } static struct usb_configuration sourcesink_driver = { - .label = "source/sink", - .strings = sourcesink_strings, - .setup = sourcesink_setup, - .bConfigurationValue = 3, - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, - /* .iConfiguration = DYNAMIC */ + .label = "source/sink", + .strings = sourcesink_strings, + .setup = sourcesink_setup, + .bConfigurationValue = 3, + .bmAttributes = USB_CONFIG_ATT_SELFPOWER, + /* .iConfiguration = DYNAMIC */ }; /** @@ -567,7 +880,8 @@ int __init sourcesink_add(struct usb_composite_dev *cdev, bool autoresume) return id; strings_sourcesink[0].id = id; - source_sink_intf.iInterface = id; + source_sink_intf_alt0.iInterface = id; + source_sink_intf_alt1.iInterface = id; sourcesink_driver.iConfiguration = id; /* support autoresume for remote wakeup testing */ diff --git a/drivers/usb/gadget/g_zero.h b/drivers/usb/gadget/g_zero.h index e84b3c4..71ca193 100644 --- a/drivers/usb/gadget/g_zero.h +++ b/drivers/usb/gadget/g_zero.h @@ -13,10 +13,11 @@ extern unsigned buflen; extern const struct usb_descriptor_header *otg_desc[]; /* common utilities */ -struct usb_request *alloc_ep_req(struct usb_ep *ep); +struct usb_request *alloc_ep_req(struct usb_ep *ep, int len); void free_ep_req(struct usb_ep *ep, struct usb_request *req); void disable_endpoints(struct usb_composite_dev *cdev, - struct usb_ep *in, struct usb_ep *out); + struct usb_ep *in, struct usb_ep *out, + struct usb_ep *iso_in, struct usb_ep *iso_out); /* configuration-specific linkup */ int sourcesink_add(struct usb_composite_dev *cdev, bool autoresume); diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 31d3483..12ad516 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -72,7 +72,7 @@ static const char longname[] = "Gadget Zero"; -unsigned buflen = 4096; +unsigned buflen = 4096; /* only used for bulk endpoints */ module_param(buflen, uint, 0); /* @@ -170,14 +170,17 @@ static struct usb_gadget_strings *dev_strings[] = { /*-------------------------------------------------------------------------*/ -struct usb_request *alloc_ep_req(struct usb_ep *ep) +struct usb_request *alloc_ep_req(struct usb_ep *ep, int len) { struct usb_request *req; req = usb_ep_alloc_request(ep, GFP_ATOMIC); if (req) { - req->length = buflen; - req->buf = kmalloc(buflen, GFP_ATOMIC); + if (len) + req->length = len; + else + req->length = buflen; + req->buf = kmalloc(req->length, GFP_ATOMIC); if (!req->buf) { usb_ep_free_request(ep, req); req = NULL; @@ -206,10 +209,15 @@ static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep) } void disable_endpoints(struct usb_composite_dev *cdev, - struct usb_ep *in, struct usb_ep *out) + struct usb_ep *in, struct usb_ep *out, + struct usb_ep *iso_in, struct usb_ep *iso_out) { disable_ep(cdev, in); disable_ep(cdev, out); + if (iso_in) + disable_ep(cdev, iso_in); + if (iso_out) + disable_ep(cdev, iso_out); } /*-------------------------------------------------------------------------*/ @@ -311,7 +319,6 @@ static int __init zero_bind(struct usb_composite_dev *cdev) device_desc.bcdDevice = cpu_to_le16(0x9999); } - INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname); snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", -- cgit v0.10.2 From 4f06539ffa1948f1d2623f549136c87e33dc1d75 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Thu, 3 May 2012 12:58:49 +0200 Subject: f_fs: ffs_func_free: cleanup requests allocated by autoconfig functionfs was leaking request objects created by autoconfig. Signed-off-by: Peter Korsgaard Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index f52cb1a..1d4c535 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -1473,8 +1473,22 @@ static int functionfs_bind_config(struct usb_composite_dev *cdev, static void ffs_func_free(struct ffs_function *func) { + struct ffs_ep *ep = func->eps; + unsigned count = func->ffs->eps_count; + unsigned long flags; + ENTER(); + /* cleanup after autoconfig */ + spin_lock_irqsave(&func->ffs->eps_lock, flags); + do { + if (ep->ep && ep->req) + usb_ep_free_request(ep->ep, ep->req); + ep->req = NULL; + ++ep; + } while (--count); + spin_unlock_irqrestore(&func->ffs->eps_lock, flags); + ffs_data_put(func->ffs); kfree(func->eps); -- cgit v0.10.2 From 127d42ae47703fe7b7bc59c0fb687a05e22a92a4 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:16:59 +0200 Subject: usb:hsotg:samsung: Remove platform dependency from s3c-hsotg This code removes platform dependency from s3c-hsotg driver. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Kukjin Kim Signed-off-by: Felipe Balbi diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b4f1f90..e284b0e 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 7ebf79c..ad15d0f 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -42,6 +42,7 @@ #include #include #include +#include #include diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index e20bf58..a02f204 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -61,7 +61,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index ce745e1..ee0d13c 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index d55bc96..bf477e3 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -72,7 +72,7 @@ #include #include #include -#include +#include #include "common.h" diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index a8933de..921da28 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -49,6 +49,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 8b928f9..a41c808 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -57,7 +57,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h deleted file mode 100644 index dc90f5e..0000000 --- a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h +++ /dev/null @@ -1,379 +0,0 @@ -/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C - USB2.0 Highspeed/OtG device block registers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H -#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__ - -#define S3C_HSOTG_REG(x) (x) - -#define S3C_GOTGCTL S3C_HSOTG_REG(0x000) -#define S3C_GOTGCTL_BSESVLD (1 << 19) -#define S3C_GOTGCTL_ASESVLD (1 << 18) -#define S3C_GOTGCTL_DBNC_SHORT (1 << 17) -#define S3C_GOTGCTL_CONID_B (1 << 16) -#define S3C_GOTGCTL_DEVHNPEN (1 << 11) -#define S3C_GOTGCTL_HSSETHNPEN (1 << 10) -#define S3C_GOTGCTL_HNPREQ (1 << 9) -#define S3C_GOTGCTL_HSTNEGSCS (1 << 8) -#define S3C_GOTGCTL_SESREQ (1 << 1) -#define S3C_GOTGCTL_SESREQSCS (1 << 0) - -#define S3C_GOTGINT S3C_HSOTG_REG(0x004) -#define S3C_GOTGINT_DbnceDone (1 << 19) -#define S3C_GOTGINT_ADevTOUTChg (1 << 18) -#define S3C_GOTGINT_HstNegDet (1 << 17) -#define S3C_GOTGINT_HstnegSucStsChng (1 << 9) -#define S3C_GOTGINT_SesReqSucStsChng (1 << 8) -#define S3C_GOTGINT_SesEndDet (1 << 2) - -#define S3C_GAHBCFG S3C_HSOTG_REG(0x008) -#define S3C_GAHBCFG_PTxFEmpLvl (1 << 8) -#define S3C_GAHBCFG_NPTxFEmpLvl (1 << 7) -#define S3C_GAHBCFG_DMAEn (1 << 5) -#define S3C_GAHBCFG_HBstLen_MASK (0xf << 1) -#define S3C_GAHBCFG_HBstLen_SHIFT (1) -#define S3C_GAHBCFG_HBstLen_Single (0x0 << 1) -#define S3C_GAHBCFG_HBstLen_Incr (0x1 << 1) -#define S3C_GAHBCFG_HBstLen_Incr4 (0x3 << 1) -#define S3C_GAHBCFG_HBstLen_Incr8 (0x5 << 1) -#define S3C_GAHBCFG_HBstLen_Incr16 (0x7 << 1) -#define S3C_GAHBCFG_GlblIntrEn (1 << 0) - -#define S3C_GUSBCFG S3C_HSOTG_REG(0x00C) -#define S3C_GUSBCFG_PHYLPClkSel (1 << 15) -#define S3C_GUSBCFG_HNPCap (1 << 9) -#define S3C_GUSBCFG_SRPCap (1 << 8) -#define S3C_GUSBCFG_PHYIf16 (1 << 3) -#define S3C_GUSBCFG_TOutCal_MASK (0x7 << 0) -#define S3C_GUSBCFG_TOutCal_SHIFT (0) -#define S3C_GUSBCFG_TOutCal_LIMIT (0x7) -#define S3C_GUSBCFG_TOutCal(_x) ((_x) << 0) - -#define S3C_GRSTCTL S3C_HSOTG_REG(0x010) - -#define S3C_GRSTCTL_AHBIdle (1 << 31) -#define S3C_GRSTCTL_DMAReq (1 << 30) -#define S3C_GRSTCTL_TxFNum_MASK (0x1f << 6) -#define S3C_GRSTCTL_TxFNum_SHIFT (6) -#define S3C_GRSTCTL_TxFNum_LIMIT (0x1f) -#define S3C_GRSTCTL_TxFNum(_x) ((_x) << 6) -#define S3C_GRSTCTL_TxFFlsh (1 << 5) -#define S3C_GRSTCTL_RxFFlsh (1 << 4) -#define S3C_GRSTCTL_INTknQFlsh (1 << 3) -#define S3C_GRSTCTL_FrmCntrRst (1 << 2) -#define S3C_GRSTCTL_HSftRst (1 << 1) -#define S3C_GRSTCTL_CSftRst (1 << 0) - -#define S3C_GINTSTS S3C_HSOTG_REG(0x014) -#define S3C_GINTMSK S3C_HSOTG_REG(0x018) - -#define S3C_GINTSTS_WkUpInt (1 << 31) -#define S3C_GINTSTS_SessReqInt (1 << 30) -#define S3C_GINTSTS_DisconnInt (1 << 29) -#define S3C_GINTSTS_ConIDStsChng (1 << 28) -#define S3C_GINTSTS_PTxFEmp (1 << 26) -#define S3C_GINTSTS_HChInt (1 << 25) -#define S3C_GINTSTS_PrtInt (1 << 24) -#define S3C_GINTSTS_FetSusp (1 << 22) -#define S3C_GINTSTS_incompIP (1 << 21) -#define S3C_GINTSTS_IncomplSOIN (1 << 20) -#define S3C_GINTSTS_OEPInt (1 << 19) -#define S3C_GINTSTS_IEPInt (1 << 18) -#define S3C_GINTSTS_EPMis (1 << 17) -#define S3C_GINTSTS_EOPF (1 << 15) -#define S3C_GINTSTS_ISOutDrop (1 << 14) -#define S3C_GINTSTS_EnumDone (1 << 13) -#define S3C_GINTSTS_USBRst (1 << 12) -#define S3C_GINTSTS_USBSusp (1 << 11) -#define S3C_GINTSTS_ErlySusp (1 << 10) -#define S3C_GINTSTS_GOUTNakEff (1 << 7) -#define S3C_GINTSTS_GINNakEff (1 << 6) -#define S3C_GINTSTS_NPTxFEmp (1 << 5) -#define S3C_GINTSTS_RxFLvl (1 << 4) -#define S3C_GINTSTS_SOF (1 << 3) -#define S3C_GINTSTS_OTGInt (1 << 2) -#define S3C_GINTSTS_ModeMis (1 << 1) -#define S3C_GINTSTS_CurMod_Host (1 << 0) - -#define S3C_GRXSTSR S3C_HSOTG_REG(0x01C) -#define S3C_GRXSTSP S3C_HSOTG_REG(0x020) - -#define S3C_GRXSTS_FN_MASK (0x7f << 25) -#define S3C_GRXSTS_FN_SHIFT (25) - -#define S3C_GRXSTS_PktSts_MASK (0xf << 17) -#define S3C_GRXSTS_PktSts_SHIFT (17) -#define S3C_GRXSTS_PktSts_GlobalOutNAK (0x1 << 17) -#define S3C_GRXSTS_PktSts_OutRX (0x2 << 17) -#define S3C_GRXSTS_PktSts_OutDone (0x3 << 17) -#define S3C_GRXSTS_PktSts_SetupDone (0x4 << 17) -#define S3C_GRXSTS_PktSts_SetupRX (0x6 << 17) - -#define S3C_GRXSTS_DPID_MASK (0x3 << 15) -#define S3C_GRXSTS_DPID_SHIFT (15) -#define S3C_GRXSTS_ByteCnt_MASK (0x7ff << 4) -#define S3C_GRXSTS_ByteCnt_SHIFT (4) -#define S3C_GRXSTS_EPNum_MASK (0xf << 0) -#define S3C_GRXSTS_EPNum_SHIFT (0) - -#define S3C_GRXFSIZ S3C_HSOTG_REG(0x024) - -#define S3C_GNPTXFSIZ S3C_HSOTG_REG(0x028) - -#define S3C_GNPTXFSIZ_NPTxFDep_MASK (0xffff << 16) -#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT (16) -#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT (0xffff) -#define S3C_GNPTXFSIZ_NPTxFDep(_x) ((_x) << 16) -#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK (0xffff << 0) -#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT (0) -#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT (0xffff) -#define S3C_GNPTXFSIZ_NPTxFStAddr(_x) ((_x) << 0) - -#define S3C_GNPTXSTS S3C_HSOTG_REG(0x02C) - -#define S3C_GNPTXSTS_NPtxQTop_MASK (0x7f << 24) -#define S3C_GNPTXSTS_NPtxQTop_SHIFT (24) - -#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK (0xff << 16) -#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT (16) -#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v) (((_v) >> 16) & 0xff) - -#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK (0xffff << 0) -#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT (0) -#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v) (((_v) >> 0) & 0xffff) - - -#define S3C_HPTXFSIZ S3C_HSOTG_REG(0x100) - -#define S3C_DPTXFSIZn(_a) S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4)) - -#define S3C_DPTXFSIZn_DPTxFSize_MASK (0xffff << 16) -#define S3C_DPTXFSIZn_DPTxFSize_SHIFT (16) -#define S3C_DPTXFSIZn_DPTxFSize_GET(_v) (((_v) >> 16) & 0xffff) -#define S3C_DPTXFSIZn_DPTxFSize_LIMIT (0xffff) -#define S3C_DPTXFSIZn_DPTxFSize(_x) ((_x) << 16) - -#define S3C_DPTXFSIZn_DPTxFStAddr_MASK (0xffff << 0) -#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT (0) - -/* Device mode registers */ -#define S3C_DCFG S3C_HSOTG_REG(0x800) - -#define S3C_DCFG_EPMisCnt_MASK (0x1f << 18) -#define S3C_DCFG_EPMisCnt_SHIFT (18) -#define S3C_DCFG_EPMisCnt_LIMIT (0x1f) -#define S3C_DCFG_EPMisCnt(_x) ((_x) << 18) - -#define S3C_DCFG_PerFrInt_MASK (0x3 << 11) -#define S3C_DCFG_PerFrInt_SHIFT (11) -#define S3C_DCFG_PerFrInt_LIMIT (0x3) -#define S3C_DCFG_PerFrInt(_x) ((_x) << 11) - -#define S3C_DCFG_DevAddr_MASK (0x7f << 4) -#define S3C_DCFG_DevAddr_SHIFT (4) -#define S3C_DCFG_DevAddr_LIMIT (0x7f) -#define S3C_DCFG_DevAddr(_x) ((_x) << 4) - -#define S3C_DCFG_NZStsOUTHShk (1 << 2) - -#define S3C_DCFG_DevSpd_MASK (0x3 << 0) -#define S3C_DCFG_DevSpd_SHIFT (0) -#define S3C_DCFG_DevSpd_HS (0x0 << 0) -#define S3C_DCFG_DevSpd_FS (0x1 << 0) -#define S3C_DCFG_DevSpd_LS (0x2 << 0) -#define S3C_DCFG_DevSpd_FS48 (0x3 << 0) - -#define S3C_DCTL S3C_HSOTG_REG(0x804) - -#define S3C_DCTL_PWROnPrgDone (1 << 11) -#define S3C_DCTL_CGOUTNak (1 << 10) -#define S3C_DCTL_SGOUTNak (1 << 9) -#define S3C_DCTL_CGNPInNAK (1 << 8) -#define S3C_DCTL_SGNPInNAK (1 << 7) -#define S3C_DCTL_TstCtl_MASK (0x7 << 4) -#define S3C_DCTL_TstCtl_SHIFT (4) -#define S3C_DCTL_GOUTNakSts (1 << 3) -#define S3C_DCTL_GNPINNakSts (1 << 2) -#define S3C_DCTL_SftDiscon (1 << 1) -#define S3C_DCTL_RmtWkUpSig (1 << 0) - -#define S3C_DSTS S3C_HSOTG_REG(0x808) - -#define S3C_DSTS_SOFFN_MASK (0x3fff << 8) -#define S3C_DSTS_SOFFN_SHIFT (8) -#define S3C_DSTS_SOFFN_LIMIT (0x3fff) -#define S3C_DSTS_SOFFN(_x) ((_x) << 8) -#define S3C_DSTS_ErraticErr (1 << 3) -#define S3C_DSTS_EnumSpd_MASK (0x3 << 1) -#define S3C_DSTS_EnumSpd_SHIFT (1) -#define S3C_DSTS_EnumSpd_HS (0x0 << 1) -#define S3C_DSTS_EnumSpd_FS (0x1 << 1) -#define S3C_DSTS_EnumSpd_LS (0x2 << 1) -#define S3C_DSTS_EnumSpd_FS48 (0x3 << 1) - -#define S3C_DSTS_SuspSts (1 << 0) - -#define S3C_DIEPMSK S3C_HSOTG_REG(0x810) - -#define S3C_DIEPMSK_TxFIFOEmpty (1 << 7) -#define S3C_DIEPMSK_INEPNakEffMsk (1 << 6) -#define S3C_DIEPMSK_INTknEPMisMsk (1 << 5) -#define S3C_DIEPMSK_INTknTXFEmpMsk (1 << 4) -#define S3C_DIEPMSK_TimeOUTMsk (1 << 3) -#define S3C_DIEPMSK_AHBErrMsk (1 << 2) -#define S3C_DIEPMSK_EPDisbldMsk (1 << 1) -#define S3C_DIEPMSK_XferComplMsk (1 << 0) - -#define S3C_DOEPMSK S3C_HSOTG_REG(0x814) - -#define S3C_DOEPMSK_Back2BackSetup (1 << 6) -#define S3C_DOEPMSK_OUTTknEPdisMsk (1 << 4) -#define S3C_DOEPMSK_SetupMsk (1 << 3) -#define S3C_DOEPMSK_AHBErrMsk (1 << 2) -#define S3C_DOEPMSK_EPDisbldMsk (1 << 1) -#define S3C_DOEPMSK_XferComplMsk (1 << 0) - -#define S3C_DAINT S3C_HSOTG_REG(0x818) -#define S3C_DAINTMSK S3C_HSOTG_REG(0x81C) - -#define S3C_DAINT_OutEP_SHIFT (16) -#define S3C_DAINT_OutEP(x) (1 << ((x) + 16)) -#define S3C_DAINT_InEP(x) (1 << (x)) - -#define S3C_DTKNQR1 S3C_HSOTG_REG(0x820) -#define S3C_DTKNQR2 S3C_HSOTG_REG(0x824) -#define S3C_DTKNQR3 S3C_HSOTG_REG(0x830) -#define S3C_DTKNQR4 S3C_HSOTG_REG(0x834) - -#define S3C_DVBUSDIS S3C_HSOTG_REG(0x828) -#define S3C_DVBUSPULSE S3C_HSOTG_REG(0x82C) - -#define S3C_DIEPCTL0 S3C_HSOTG_REG(0x900) -#define S3C_DOEPCTL0 S3C_HSOTG_REG(0xB00) -#define S3C_DIEPCTL(_a) S3C_HSOTG_REG(0x900 + ((_a) * 0x20)) -#define S3C_DOEPCTL(_a) S3C_HSOTG_REG(0xB00 + ((_a) * 0x20)) - -/* EP0 specialness: - * bits[29..28] - reserved (no SetD0PID, SetD1PID) - * bits[25..22] - should always be zero, this isn't a periodic endpoint - * bits[10..0] - MPS setting differenct for EP0 -*/ -#define S3C_D0EPCTL_MPS_MASK (0x3 << 0) -#define S3C_D0EPCTL_MPS_SHIFT (0) -#define S3C_D0EPCTL_MPS_64 (0x0 << 0) -#define S3C_D0EPCTL_MPS_32 (0x1 << 0) -#define S3C_D0EPCTL_MPS_16 (0x2 << 0) -#define S3C_D0EPCTL_MPS_8 (0x3 << 0) - -#define S3C_DxEPCTL_EPEna (1 << 31) -#define S3C_DxEPCTL_EPDis (1 << 30) -#define S3C_DxEPCTL_SetD1PID (1 << 29) -#define S3C_DxEPCTL_SetOddFr (1 << 29) -#define S3C_DxEPCTL_SetD0PID (1 << 28) -#define S3C_DxEPCTL_SetEvenFr (1 << 28) -#define S3C_DxEPCTL_SNAK (1 << 27) -#define S3C_DxEPCTL_CNAK (1 << 26) -#define S3C_DxEPCTL_TxFNum_MASK (0xf << 22) -#define S3C_DxEPCTL_TxFNum_SHIFT (22) -#define S3C_DxEPCTL_TxFNum_LIMIT (0xf) -#define S3C_DxEPCTL_TxFNum(_x) ((_x) << 22) - -#define S3C_DxEPCTL_Stall (1 << 21) -#define S3C_DxEPCTL_Snp (1 << 20) -#define S3C_DxEPCTL_EPType_MASK (0x3 << 18) -#define S3C_DxEPCTL_EPType_SHIFT (18) -#define S3C_DxEPCTL_EPType_Control (0x0 << 18) -#define S3C_DxEPCTL_EPType_Iso (0x1 << 18) -#define S3C_DxEPCTL_EPType_Bulk (0x2 << 18) -#define S3C_DxEPCTL_EPType_Intterupt (0x3 << 18) - -#define S3C_DxEPCTL_NAKsts (1 << 17) -#define S3C_DxEPCTL_DPID (1 << 16) -#define S3C_DxEPCTL_EOFrNum (1 << 16) -#define S3C_DxEPCTL_USBActEp (1 << 15) -#define S3C_DxEPCTL_NextEp_MASK (0xf << 11) -#define S3C_DxEPCTL_NextEp_SHIFT (11) -#define S3C_DxEPCTL_NextEp_LIMIT (0xf) -#define S3C_DxEPCTL_NextEp(_x) ((_x) << 11) - -#define S3C_DxEPCTL_MPS_MASK (0x7ff << 0) -#define S3C_DxEPCTL_MPS_SHIFT (0) -#define S3C_DxEPCTL_MPS_LIMIT (0x7ff) -#define S3C_DxEPCTL_MPS(_x) ((_x) << 0) - -#define S3C_DIEPINT(_a) S3C_HSOTG_REG(0x908 + ((_a) * 0x20)) -#define S3C_DOEPINT(_a) S3C_HSOTG_REG(0xB08 + ((_a) * 0x20)) - -#define S3C_DxEPINT_INEPNakEff (1 << 6) -#define S3C_DxEPINT_Back2BackSetup (1 << 6) -#define S3C_DxEPINT_INTknEPMis (1 << 5) -#define S3C_DxEPINT_INTknTXFEmp (1 << 4) -#define S3C_DxEPINT_OUTTknEPdis (1 << 4) -#define S3C_DxEPINT_Timeout (1 << 3) -#define S3C_DxEPINT_Setup (1 << 3) -#define S3C_DxEPINT_AHBErr (1 << 2) -#define S3C_DxEPINT_EPDisbld (1 << 1) -#define S3C_DxEPINT_XferCompl (1 << 0) - -#define S3C_DIEPTSIZ0 S3C_HSOTG_REG(0x910) - -#define S3C_DIEPTSIZ0_PktCnt_MASK (0x3 << 19) -#define S3C_DIEPTSIZ0_PktCnt_SHIFT (19) -#define S3C_DIEPTSIZ0_PktCnt_LIMIT (0x3) -#define S3C_DIEPTSIZ0_PktCnt(_x) ((_x) << 19) - -#define S3C_DIEPTSIZ0_XferSize_MASK (0x7f << 0) -#define S3C_DIEPTSIZ0_XferSize_SHIFT (0) -#define S3C_DIEPTSIZ0_XferSize_LIMIT (0x7f) -#define S3C_DIEPTSIZ0_XferSize(_x) ((_x) << 0) - - -#define DOEPTSIZ0 S3C_HSOTG_REG(0xB10) -#define S3C_DOEPTSIZ0_SUPCnt_MASK (0x3 << 29) -#define S3C_DOEPTSIZ0_SUPCnt_SHIFT (29) -#define S3C_DOEPTSIZ0_SUPCnt_LIMIT (0x3) -#define S3C_DOEPTSIZ0_SUPCnt(_x) ((_x) << 29) - -#define S3C_DOEPTSIZ0_PktCnt (1 << 19) -#define S3C_DOEPTSIZ0_XferSize_MASK (0x7f << 0) -#define S3C_DOEPTSIZ0_XferSize_SHIFT (0) - -#define S3C_DIEPTSIZ(_a) S3C_HSOTG_REG(0x910 + ((_a) * 0x20)) -#define S3C_DOEPTSIZ(_a) S3C_HSOTG_REG(0xB10 + ((_a) * 0x20)) - -#define S3C_DxEPTSIZ_MC_MASK (0x3 << 29) -#define S3C_DxEPTSIZ_MC_SHIFT (29) -#define S3C_DxEPTSIZ_MC_LIMIT (0x3) -#define S3C_DxEPTSIZ_MC(_x) ((_x) << 29) - -#define S3C_DxEPTSIZ_PktCnt_MASK (0x3ff << 19) -#define S3C_DxEPTSIZ_PktCnt_SHIFT (19) -#define S3C_DxEPTSIZ_PktCnt_GET(_v) (((_v) >> 19) & 0x3ff) -#define S3C_DxEPTSIZ_PktCnt_LIMIT (0x3ff) -#define S3C_DxEPTSIZ_PktCnt(_x) ((_x) << 19) - -#define S3C_DxEPTSIZ_XferSize_MASK (0x7ffff << 0) -#define S3C_DxEPTSIZ_XferSize_SHIFT (0) -#define S3C_DxEPTSIZ_XferSize_GET(_v) (((_v) >> 0) & 0x7ffff) -#define S3C_DxEPTSIZ_XferSize_LIMIT (0x7ffff) -#define S3C_DxEPTSIZ_XferSize(_x) ((_x) << 0) - - -#define S3C_DIEPDMA(_a) S3C_HSOTG_REG(0x914 + ((_a) * 0x20)) -#define S3C_DOEPDMA(_a) S3C_HSOTG_REG(0xB14 + ((_a) * 0x20)) -#define S3C_DTXFSTS(_a) S3C_HSOTG_REG(0x918 + ((_a) * 0x20)) - -#define S3C_EPFIFO(_a) S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000)) - -#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */ diff --git a/arch/arm/plat-samsung/include/plat/udc-hs.h b/arch/arm/plat-samsung/include/plat/udc-hs.h deleted file mode 100644 index c9e3667..0000000 --- a/arch/arm/plat-samsung/include/plat/udc-hs.h +++ /dev/null @@ -1,34 +0,0 @@ -/* arch/arm/plat-s3c/include/plat/udc-hs.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * S3C USB2.0 High-speed / OtG platform information - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -enum s3c_hsotg_dmamode { - S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ - S3C_HSOTG_DMA_ONLY, /* always use DMA */ - S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */ -}; - -/** - * struct s3c_hsotg_plat - platform data for high-speed otg/udc - * @dma: Whether to use DMA or not. - * @is_osc: The clock source is an oscillator, not a crystal - */ -struct s3c_hsotg_plat { - enum s3c_hsotg_dmamode dma; - unsigned int is_osc : 1; - - int (*phy_init)(struct platform_device *pdev, int type); - int (*phy_exit)(struct platform_device *pdev, int type); -}; - -extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd); diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 105b206..70c6f3b 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -34,9 +34,9 @@ #include #include -#include +#include "s3c-hsotg.h" +#include #include -#include #include #define DMA_ADDR_INVALID (~((dma_addr_t)0)) diff --git a/drivers/usb/gadget/s3c-hsotg.h b/drivers/usb/gadget/s3c-hsotg.h new file mode 100644 index 0000000..4c4ccc4 --- /dev/null +++ b/drivers/usb/gadget/s3c-hsotg.h @@ -0,0 +1,379 @@ +/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C - USB2.0 Highspeed/OtG device block registers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H +#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__ + +#define S3C_HSOTG_REG(x) (x) + +#define S3C_GOTGCTL S3C_HSOTG_REG(0x000) +#define S3C_GOTGCTL_BSESVLD (1 << 19) +#define S3C_GOTGCTL_ASESVLD (1 << 18) +#define S3C_GOTGCTL_DBNC_SHORT (1 << 17) +#define S3C_GOTGCTL_CONID_B (1 << 16) +#define S3C_GOTGCTL_DEVHNPEN (1 << 11) +#define S3C_GOTGCTL_HSSETHNPEN (1 << 10) +#define S3C_GOTGCTL_HNPREQ (1 << 9) +#define S3C_GOTGCTL_HSTNEGSCS (1 << 8) +#define S3C_GOTGCTL_SESREQ (1 << 1) +#define S3C_GOTGCTL_SESREQSCS (1 << 0) + +#define S3C_GOTGINT S3C_HSOTG_REG(0x004) +#define S3C_GOTGINT_DbnceDone (1 << 19) +#define S3C_GOTGINT_ADevTOUTChg (1 << 18) +#define S3C_GOTGINT_HstNegDet (1 << 17) +#define S3C_GOTGINT_HstnegSucStsChng (1 << 9) +#define S3C_GOTGINT_SesReqSucStsChng (1 << 8) +#define S3C_GOTGINT_SesEndDet (1 << 2) + +#define S3C_GAHBCFG S3C_HSOTG_REG(0x008) +#define S3C_GAHBCFG_PTxFEmpLvl (1 << 8) +#define S3C_GAHBCFG_NPTxFEmpLvl (1 << 7) +#define S3C_GAHBCFG_DMAEn (1 << 5) +#define S3C_GAHBCFG_HBstLen_MASK (0xf << 1) +#define S3C_GAHBCFG_HBstLen_SHIFT (1) +#define S3C_GAHBCFG_HBstLen_Single (0x0 << 1) +#define S3C_GAHBCFG_HBstLen_Incr (0x1 << 1) +#define S3C_GAHBCFG_HBstLen_Incr4 (0x3 << 1) +#define S3C_GAHBCFG_HBstLen_Incr8 (0x5 << 1) +#define S3C_GAHBCFG_HBstLen_Incr16 (0x7 << 1) +#define S3C_GAHBCFG_GlblIntrEn (1 << 0) + +#define S3C_GUSBCFG S3C_HSOTG_REG(0x00C) +#define S3C_GUSBCFG_PHYLPClkSel (1 << 15) +#define S3C_GUSBCFG_HNPCap (1 << 9) +#define S3C_GUSBCFG_SRPCap (1 << 8) +#define S3C_GUSBCFG_PHYIf16 (1 << 3) +#define S3C_GUSBCFG_TOutCal_MASK (0x7 << 0) +#define S3C_GUSBCFG_TOutCal_SHIFT (0) +#define S3C_GUSBCFG_TOutCal_LIMIT (0x7) +#define S3C_GUSBCFG_TOutCal(_x) ((_x) << 0) + +#define S3C_GRSTCTL S3C_HSOTG_REG(0x010) + +#define S3C_GRSTCTL_AHBIdle (1 << 31) +#define S3C_GRSTCTL_DMAReq (1 << 30) +#define S3C_GRSTCTL_TxFNum_MASK (0x1f << 6) +#define S3C_GRSTCTL_TxFNum_SHIFT (6) +#define S3C_GRSTCTL_TxFNum_LIMIT (0x1f) +#define S3C_GRSTCTL_TxFNum(_x) ((_x) << 6) +#define S3C_GRSTCTL_TxFFlsh (1 << 5) +#define S3C_GRSTCTL_RxFFlsh (1 << 4) +#define S3C_GRSTCTL_INTknQFlsh (1 << 3) +#define S3C_GRSTCTL_FrmCntrRst (1 << 2) +#define S3C_GRSTCTL_HSftRst (1 << 1) +#define S3C_GRSTCTL_CSftRst (1 << 0) + +#define S3C_GINTSTS S3C_HSOTG_REG(0x014) +#define S3C_GINTMSK S3C_HSOTG_REG(0x018) + +#define S3C_GINTSTS_WkUpInt (1 << 31) +#define S3C_GINTSTS_SessReqInt (1 << 30) +#define S3C_GINTSTS_DisconnInt (1 << 29) +#define S3C_GINTSTS_ConIDStsChng (1 << 28) +#define S3C_GINTSTS_PTxFEmp (1 << 26) +#define S3C_GINTSTS_HChInt (1 << 25) +#define S3C_GINTSTS_PrtInt (1 << 24) +#define S3C_GINTSTS_FetSusp (1 << 22) +#define S3C_GINTSTS_incompIP (1 << 21) +#define S3C_GINTSTS_IncomplSOIN (1 << 20) +#define S3C_GINTSTS_OEPInt (1 << 19) +#define S3C_GINTSTS_IEPInt (1 << 18) +#define S3C_GINTSTS_EPMis (1 << 17) +#define S3C_GINTSTS_EOPF (1 << 15) +#define S3C_GINTSTS_ISOutDrop (1 << 14) +#define S3C_GINTSTS_EnumDone (1 << 13) +#define S3C_GINTSTS_USBRst (1 << 12) +#define S3C_GINTSTS_USBSusp (1 << 11) +#define S3C_GINTSTS_ErlySusp (1 << 10) +#define S3C_GINTSTS_GOUTNakEff (1 << 7) +#define S3C_GINTSTS_GINNakEff (1 << 6) +#define S3C_GINTSTS_NPTxFEmp (1 << 5) +#define S3C_GINTSTS_RxFLvl (1 << 4) +#define S3C_GINTSTS_SOF (1 << 3) +#define S3C_GINTSTS_OTGInt (1 << 2) +#define S3C_GINTSTS_ModeMis (1 << 1) +#define S3C_GINTSTS_CurMod_Host (1 << 0) + +#define S3C_GRXSTSR S3C_HSOTG_REG(0x01C) +#define S3C_GRXSTSP S3C_HSOTG_REG(0x020) + +#define S3C_GRXSTS_FN_MASK (0x7f << 25) +#define S3C_GRXSTS_FN_SHIFT (25) + +#define S3C_GRXSTS_PktSts_MASK (0xf << 17) +#define S3C_GRXSTS_PktSts_SHIFT (17) +#define S3C_GRXSTS_PktSts_GlobalOutNAK (0x1 << 17) +#define S3C_GRXSTS_PktSts_OutRX (0x2 << 17) +#define S3C_GRXSTS_PktSts_OutDone (0x3 << 17) +#define S3C_GRXSTS_PktSts_SetupDone (0x4 << 17) +#define S3C_GRXSTS_PktSts_SetupRX (0x6 << 17) + +#define S3C_GRXSTS_DPID_MASK (0x3 << 15) +#define S3C_GRXSTS_DPID_SHIFT (15) +#define S3C_GRXSTS_ByteCnt_MASK (0x7ff << 4) +#define S3C_GRXSTS_ByteCnt_SHIFT (4) +#define S3C_GRXSTS_EPNum_MASK (0xf << 0) +#define S3C_GRXSTS_EPNum_SHIFT (0) + +#define S3C_GRXFSIZ S3C_HSOTG_REG(0x024) + +#define S3C_GNPTXFSIZ S3C_HSOTG_REG(0x028) + +#define S3C_GNPTXFSIZ_NPTxFDep_MASK (0xffff << 16) +#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT (16) +#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT (0xffff) +#define S3C_GNPTXFSIZ_NPTxFDep(_x) ((_x) << 16) +#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK (0xffff << 0) +#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT (0) +#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT (0xffff) +#define S3C_GNPTXFSIZ_NPTxFStAddr(_x) ((_x) << 0) + +#define S3C_GNPTXSTS S3C_HSOTG_REG(0x02C) + +#define S3C_GNPTXSTS_NPtxQTop_MASK (0x7f << 24) +#define S3C_GNPTXSTS_NPtxQTop_SHIFT (24) + +#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK (0xff << 16) +#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT (16) +#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v) (((_v) >> 16) & 0xff) + +#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK (0xffff << 0) +#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT (0) +#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v) (((_v) >> 0) & 0xffff) + + +#define S3C_HPTXFSIZ S3C_HSOTG_REG(0x100) + +#define S3C_DPTXFSIZn(_a) S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4)) + +#define S3C_DPTXFSIZn_DPTxFSize_MASK (0xffff << 16) +#define S3C_DPTXFSIZn_DPTxFSize_SHIFT (16) +#define S3C_DPTXFSIZn_DPTxFSize_GET(_v) (((_v) >> 16) & 0xffff) +#define S3C_DPTXFSIZn_DPTxFSize_LIMIT (0xffff) +#define S3C_DPTXFSIZn_DPTxFSize(_x) ((_x) << 16) + +#define S3C_DPTXFSIZn_DPTxFStAddr_MASK (0xffff << 0) +#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT (0) + +/* Device mode registers */ +#define S3C_DCFG S3C_HSOTG_REG(0x800) + +#define S3C_DCFG_EPMisCnt_MASK (0x1f << 18) +#define S3C_DCFG_EPMisCnt_SHIFT (18) +#define S3C_DCFG_EPMisCnt_LIMIT (0x1f) +#define S3C_DCFG_EPMisCnt(_x) ((_x) << 18) + +#define S3C_DCFG_PerFrInt_MASK (0x3 << 11) +#define S3C_DCFG_PerFrInt_SHIFT (11) +#define S3C_DCFG_PerFrInt_LIMIT (0x3) +#define S3C_DCFG_PerFrInt(_x) ((_x) << 11) + +#define S3C_DCFG_DevAddr_MASK (0x7f << 4) +#define S3C_DCFG_DevAddr_SHIFT (4) +#define S3C_DCFG_DevAddr_LIMIT (0x7f) +#define S3C_DCFG_DevAddr(_x) ((_x) << 4) + +#define S3C_DCFG_NZStsOUTHShk (1 << 2) + +#define S3C_DCFG_DevSpd_MASK (0x3 << 0) +#define S3C_DCFG_DevSpd_SHIFT (0) +#define S3C_DCFG_DevSpd_HS (0x0 << 0) +#define S3C_DCFG_DevSpd_FS (0x1 << 0) +#define S3C_DCFG_DevSpd_LS (0x2 << 0) +#define S3C_DCFG_DevSpd_FS48 (0x3 << 0) + +#define S3C_DCTL S3C_HSOTG_REG(0x804) + +#define S3C_DCTL_PWROnPrgDone (1 << 11) +#define S3C_DCTL_CGOUTNak (1 << 10) +#define S3C_DCTL_SGOUTNak (1 << 9) +#define S3C_DCTL_CGNPInNAK (1 << 8) +#define S3C_DCTL_SGNPInNAK (1 << 7) +#define S3C_DCTL_TstCtl_MASK (0x7 << 4) +#define S3C_DCTL_TstCtl_SHIFT (4) +#define S3C_DCTL_GOUTNakSts (1 << 3) +#define S3C_DCTL_GNPINNakSts (1 << 2) +#define S3C_DCTL_SftDiscon (1 << 1) +#define S3C_DCTL_RmtWkUpSig (1 << 0) + +#define S3C_DSTS S3C_HSOTG_REG(0x808) + +#define S3C_DSTS_SOFFN_MASK (0x3fff << 8) +#define S3C_DSTS_SOFFN_SHIFT (8) +#define S3C_DSTS_SOFFN_LIMIT (0x3fff) +#define S3C_DSTS_SOFFN(_x) ((_x) << 8) +#define S3C_DSTS_ErraticErr (1 << 3) +#define S3C_DSTS_EnumSpd_MASK (0x3 << 1) +#define S3C_DSTS_EnumSpd_SHIFT (1) +#define S3C_DSTS_EnumSpd_HS (0x0 << 1) +#define S3C_DSTS_EnumSpd_FS (0x1 << 1) +#define S3C_DSTS_EnumSpd_LS (0x2 << 1) +#define S3C_DSTS_EnumSpd_FS48 (0x3 << 1) + +#define S3C_DSTS_SuspSts (1 << 0) + +#define S3C_DIEPMSK S3C_HSOTG_REG(0x810) + +#define S3C_DIEPMSK_TxFIFOEmpty (1 << 7) +#define S3C_DIEPMSK_INEPNakEffMsk (1 << 6) +#define S3C_DIEPMSK_INTknEPMisMsk (1 << 5) +#define S3C_DIEPMSK_INTknTXFEmpMsk (1 << 4) +#define S3C_DIEPMSK_TimeOUTMsk (1 << 3) +#define S3C_DIEPMSK_AHBErrMsk (1 << 2) +#define S3C_DIEPMSK_EPDisbldMsk (1 << 1) +#define S3C_DIEPMSK_XferComplMsk (1 << 0) + +#define S3C_DOEPMSK S3C_HSOTG_REG(0x814) + +#define S3C_DOEPMSK_Back2BackSetup (1 << 6) +#define S3C_DOEPMSK_OUTTknEPdisMsk (1 << 4) +#define S3C_DOEPMSK_SetupMsk (1 << 3) +#define S3C_DOEPMSK_AHBErrMsk (1 << 2) +#define S3C_DOEPMSK_EPDisbldMsk (1 << 1) +#define S3C_DOEPMSK_XferComplMsk (1 << 0) + +#define S3C_DAINT S3C_HSOTG_REG(0x818) +#define S3C_DAINTMSK S3C_HSOTG_REG(0x81C) + +#define S3C_DAINT_OutEP_SHIFT (16) +#define S3C_DAINT_OutEP(x) (1 << ((x) + 16)) +#define S3C_DAINT_InEP(x) (1 << (x)) + +#define S3C_DTKNQR1 S3C_HSOTG_REG(0x820) +#define S3C_DTKNQR2 S3C_HSOTG_REG(0x824) +#define S3C_DTKNQR3 S3C_HSOTG_REG(0x830) +#define S3C_DTKNQR4 S3C_HSOTG_REG(0x834) + +#define S3C_DVBUSDIS S3C_HSOTG_REG(0x828) +#define S3C_DVBUSPULSE S3C_HSOTG_REG(0x82C) + +#define S3C_DIEPCTL0 S3C_HSOTG_REG(0x900) +#define S3C_DOEPCTL0 S3C_HSOTG_REG(0xB00) +#define S3C_DIEPCTL(_a) S3C_HSOTG_REG(0x900 + ((_a) * 0x20)) +#define S3C_DOEPCTL(_a) S3C_HSOTG_REG(0xB00 + ((_a) * 0x20)) + +/* EP0 specialness: + * bits[29..28] - reserved (no SetD0PID, SetD1PID) + * bits[25..22] - should always be zero, this isn't a periodic endpoint + * bits[10..0] - MPS setting differenct for EP0 +*/ +#define S3C_D0EPCTL_MPS_MASK (0x3 << 0) +#define S3C_D0EPCTL_MPS_SHIFT (0) +#define S3C_D0EPCTL_MPS_64 (0x0 << 0) +#define S3C_D0EPCTL_MPS_32 (0x1 << 0) +#define S3C_D0EPCTL_MPS_16 (0x2 << 0) +#define S3C_D0EPCTL_MPS_8 (0x3 << 0) + +#define S3C_DxEPCTL_EPEna (1 << 31) +#define S3C_DxEPCTL_EPDis (1 << 30) +#define S3C_DxEPCTL_SetD1PID (1 << 29) +#define S3C_DxEPCTL_SetOddFr (1 << 29) +#define S3C_DxEPCTL_SetD0PID (1 << 28) +#define S3C_DxEPCTL_SetEvenFr (1 << 28) +#define S3C_DxEPCTL_SNAK (1 << 27) +#define S3C_DxEPCTL_CNAK (1 << 26) +#define S3C_DxEPCTL_TxFNum_MASK (0xf << 22) +#define S3C_DxEPCTL_TxFNum_SHIFT (22) +#define S3C_DxEPCTL_TxFNum_LIMIT (0xf) +#define S3C_DxEPCTL_TxFNum(_x) ((_x) << 22) + +#define S3C_DxEPCTL_Stall (1 << 21) +#define S3C_DxEPCTL_Snp (1 << 20) +#define S3C_DxEPCTL_EPType_MASK (0x3 << 18) +#define S3C_DxEPCTL_EPType_SHIFT (18) +#define S3C_DxEPCTL_EPType_Control (0x0 << 18) +#define S3C_DxEPCTL_EPType_Iso (0x1 << 18) +#define S3C_DxEPCTL_EPType_Bulk (0x2 << 18) +#define S3C_DxEPCTL_EPType_Intterupt (0x3 << 18) + +#define S3C_DxEPCTL_NAKsts (1 << 17) +#define S3C_DxEPCTL_DPID (1 << 16) +#define S3C_DxEPCTL_EOFrNum (1 << 16) +#define S3C_DxEPCTL_USBActEp (1 << 15) +#define S3C_DxEPCTL_NextEp_MASK (0xf << 11) +#define S3C_DxEPCTL_NextEp_SHIFT (11) +#define S3C_DxEPCTL_NextEp_LIMIT (0xf) +#define S3C_DxEPCTL_NextEp(_x) ((_x) << 11) + +#define S3C_DxEPCTL_MPS_MASK (0x7ff << 0) +#define S3C_DxEPCTL_MPS_SHIFT (0) +#define S3C_DxEPCTL_MPS_LIMIT (0x7ff) +#define S3C_DxEPCTL_MPS(_x) ((_x) << 0) + +#define S3C_DIEPINT(_a) S3C_HSOTG_REG(0x908 + ((_a) * 0x20)) +#define S3C_DOEPINT(_a) S3C_HSOTG_REG(0xB08 + ((_a) * 0x20)) + +#define S3C_DxEPINT_INEPNakEff (1 << 6) +#define S3C_DxEPINT_Back2BackSetup (1 << 6) +#define S3C_DxEPINT_INTknEPMis (1 << 5) +#define S3C_DxEPINT_INTknTXFEmp (1 << 4) +#define S3C_DxEPINT_OUTTknEPdis (1 << 4) +#define S3C_DxEPINT_Timeout (1 << 3) +#define S3C_DxEPINT_Setup (1 << 3) +#define S3C_DxEPINT_AHBErr (1 << 2) +#define S3C_DxEPINT_EPDisbld (1 << 1) +#define S3C_DxEPINT_XferCompl (1 << 0) + +#define S3C_DIEPTSIZ0 S3C_HSOTG_REG(0x910) + +#define S3C_DIEPTSIZ0_PktCnt_MASK (0x3 << 19) +#define S3C_DIEPTSIZ0_PktCnt_SHIFT (19) +#define S3C_DIEPTSIZ0_PktCnt_LIMIT (0x3) +#define S3C_DIEPTSIZ0_PktCnt(_x) ((_x) << 19) + +#define S3C_DIEPTSIZ0_XferSize_MASK (0x7f << 0) +#define S3C_DIEPTSIZ0_XferSize_SHIFT (0) +#define S3C_DIEPTSIZ0_XferSize_LIMIT (0x7f) +#define S3C_DIEPTSIZ0_XferSize(_x) ((_x) << 0) + + +#define DOEPTSIZ0 S3C_HSOTG_REG(0xB10) +#define S3C_DOEPTSIZ0_SUPCnt_MASK (0x3 << 29) +#define S3C_DOEPTSIZ0_SUPCnt_SHIFT (29) +#define S3C_DOEPTSIZ0_SUPCnt_LIMIT (0x3) +#define S3C_DOEPTSIZ0_SUPCnt(_x) ((_x) << 29) + +#define S3C_DOEPTSIZ0_PktCnt (1 << 19) +#define S3C_DOEPTSIZ0_XferSize_MASK (0x7f << 0) +#define S3C_DOEPTSIZ0_XferSize_SHIFT (0) + +#define S3C_DIEPTSIZ(_a) S3C_HSOTG_REG(0x910 + ((_a) * 0x20)) +#define S3C_DOEPTSIZ(_a) S3C_HSOTG_REG(0xB10 + ((_a) * 0x20)) + +#define S3C_DxEPTSIZ_MC_MASK (0x3 << 29) +#define S3C_DxEPTSIZ_MC_SHIFT (29) +#define S3C_DxEPTSIZ_MC_LIMIT (0x3) +#define S3C_DxEPTSIZ_MC(_x) ((_x) << 29) + +#define S3C_DxEPTSIZ_PktCnt_MASK (0x3ff << 19) +#define S3C_DxEPTSIZ_PktCnt_SHIFT (19) +#define S3C_DxEPTSIZ_PktCnt_GET(_v) (((_v) >> 19) & 0x3ff) +#define S3C_DxEPTSIZ_PktCnt_LIMIT (0x3ff) +#define S3C_DxEPTSIZ_PktCnt(_x) ((_x) << 19) + +#define S3C_DxEPTSIZ_XferSize_MASK (0x7ffff << 0) +#define S3C_DxEPTSIZ_XferSize_SHIFT (0) +#define S3C_DxEPTSIZ_XferSize_GET(_v) (((_v) >> 0) & 0x7ffff) +#define S3C_DxEPTSIZ_XferSize_LIMIT (0x7ffff) +#define S3C_DxEPTSIZ_XferSize(_x) ((_x) << 0) + + +#define S3C_DIEPDMA(_a) S3C_HSOTG_REG(0x914 + ((_a) * 0x20)) +#define S3C_DOEPDMA(_a) S3C_HSOTG_REG(0xB14 + ((_a) * 0x20)) +#define S3C_DTXFSTS(_a) S3C_HSOTG_REG(0x918 + ((_a) * 0x20)) + +#define S3C_EPFIFO(_a) S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000)) + +#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */ diff --git a/include/linux/platform_data/s3c-hsotg.h b/include/linux/platform_data/s3c-hsotg.h new file mode 100644 index 0000000..97ec12c --- /dev/null +++ b/include/linux/platform_data/s3c-hsotg.h @@ -0,0 +1,35 @@ +/* include/linux/platform_data/s3c-hsotg.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * S3C USB2.0 High-speed / OtG platform information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +enum s3c_hsotg_dmamode { + S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ + S3C_HSOTG_DMA_ONLY, /* always use DMA */ + S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */ +}; + +/** + * struct s3c_hsotg_plat - platform data for high-speed otg/udc + * @dma: Whether to use DMA or not. + * @is_osc: The clock source is an oscillator, not a crystal + */ +struct s3c_hsotg_plat { + enum s3c_hsotg_dmamode dma; + unsigned int is_osc:1; + int phy_type; + + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd); -- cgit v0.10.2 From d77039c111565614f07887b44b098ca38360f720 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:00 +0200 Subject: usb:hsotg:samsung: Remove platform dependent functions from s3c-hsotg Two functions - namely: s3c_hsotg_gate and s3c_hsotg_otgreset are platform dependent and therefore removed from Samsung's generic s3c-hsotg code. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 70c6f3b..34069dc 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -36,8 +36,6 @@ #include #include "s3c-hsotg.h" #include -#include -#include #define DMA_ADDR_INVALID (~((dma_addr_t)0)) @@ -2846,51 +2844,6 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, } } -/** - * s3c_hsotg_otgreset - reset the OtG phy block - * @hsotg: The host state. - * - * Power up the phy, set the basic configuration and start the PHY. - */ -static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg) -{ - struct clk *xusbxti; - u32 pwr, osc; - - pwr = readl(S3C_PHYPWR); - pwr &= ~0x19; - writel(pwr, S3C_PHYPWR); - mdelay(1); - - osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0; - - xusbxti = clk_get(hsotg->dev, "xusbxti"); - if (xusbxti && !IS_ERR(xusbxti)) { - switch (clk_get_rate(xusbxti)) { - case 12*MHZ: - osc |= S3C_PHYCLK_CLKSEL_12M; - break; - case 24*MHZ: - osc |= S3C_PHYCLK_CLKSEL_24M; - break; - default: - case 48*MHZ: - /* default reference clock */ - break; - } - clk_put(xusbxti); - } - - writel(osc | 0x10, S3C_PHYCLK); - - /* issue a full set of resets to the otg and core */ - - writel(S3C_RSTCON_PHY, S3C_RSTCON); - udelay(20); /* at-least 10uS */ - writel(0, S3C_RSTCON); -} - - static void s3c_hsotg_init(struct s3c_hsotg *hsotg) { u32 cfg4; @@ -3263,32 +3216,6 @@ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) debugfs_remove(hsotg->debug_root); } -/** - * s3c_hsotg_gate - set the hardware gate for the block - * @pdev: The device we bound to - * @on: On or off. - * - * Set the hardware gate setting into the block. If we end up on - * something other than an S3C64XX, then we might need to change this - * to using a platform data callback, or some other mechanism. - */ -static void s3c_hsotg_gate(struct platform_device *pdev, bool on) -{ - unsigned long flags; - u32 others; - - local_irq_save(flags); - - others = __raw_readl(S3C64XX_OTHERS); - if (on) - others |= S3C64XX_OTHERS_USBMASK; - else - others &= ~S3C64XX_OTHERS_USBMASK; - __raw_writel(others, S3C64XX_OTHERS); - - local_irq_restore(flags); -} - static struct s3c_hsotg_plat s3c_hsotg_default_pdata; static int __devinit s3c_hsotg_probe(struct platform_device *pdev) @@ -3390,9 +3317,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) clk_enable(hsotg->clk); - s3c_hsotg_gate(pdev, true); - s3c_hsotg_otgreset(hsotg); s3c_hsotg_corereset(hsotg); s3c_hsotg_init(hsotg); @@ -3412,7 +3337,6 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) return 0; err_add_udc: - s3c_hsotg_gate(pdev, false); clk_disable(hsotg->clk); clk_put(hsotg->clk); @@ -3445,7 +3369,6 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) release_resource(hsotg->regs_res); kfree(hsotg->regs_res); - s3c_hsotg_gate(pdev, false); clk_disable(hsotg->clk); clk_put(hsotg->clk); -- cgit v0.10.2 From 4118878697c76e5444a1d5db9c399ca5d923b0a8 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:01 +0200 Subject: usb:hsotg:samsung: Wrappers for USB PHY methods Wrappers for PHY methods have been added for readability and reduction of code repetition. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 34069dc..3484a09 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -33,7 +33,6 @@ #include -#include #include "s3c-hsotg.h" #include @@ -2571,6 +2570,39 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) return 0; } +/** + * s3c_hsotg_phy_enable - enable platform phy dev + * + * @param: The driver state + * + * A wrapper for platform code responsible for controlling + * low-level USB code + */ +static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg) +{ + struct platform_device *pdev = to_platform_device(hsotg->dev); + + dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev); + if (hsotg->plat->phy_init) + hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); +} + +/** + * s3c_hsotg_phy_disable - disable platform phy dev + * + * @param: The driver state + * + * A wrapper for platform code responsible for controlling + * low-level USB code + */ +static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg) +{ + struct platform_device *pdev = to_platform_device(hsotg->dev); + + if (hsotg->plat->phy_exit) + hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); +} + static int s3c_hsotg_start(struct usb_gadget_driver *driver, int (*bind)(struct usb_gadget *)) { @@ -3216,8 +3248,6 @@ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) debugfs_remove(hsotg->debug_root); } -static struct s3c_hsotg_plat s3c_hsotg_default_pdata; - static int __devinit s3c_hsotg_probe(struct platform_device *pdev) { struct s3c_hsotg_plat *plat = pdev->dev.platform_data; @@ -3227,8 +3257,11 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) int epnum; int ret; - if (!plat) - plat = &s3c_hsotg_default_pdata; + plat = pdev->dev.platform_data; + if (!plat) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } hsotg = kzalloc(sizeof(struct s3c_hsotg) + sizeof(struct s3c_hsotg_ep) * S3C_HSOTG_EPS, @@ -3317,6 +3350,8 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) clk_enable(hsotg->clk); + /* usb phy enable */ + s3c_hsotg_phy_enable(hsotg); s3c_hsotg_corereset(hsotg); s3c_hsotg_init(hsotg); @@ -3337,6 +3372,8 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) return 0; err_add_udc: + s3c_hsotg_phy_disable(hsotg); + clk_disable(hsotg->clk); clk_put(hsotg->clk); @@ -3369,6 +3406,7 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) release_resource(hsotg->regs_res); kfree(hsotg->regs_res); + s3c_hsotg_phy_disable(hsotg); clk_disable(hsotg->clk); clk_put(hsotg->clk); -- cgit v0.10.2 From fc9a731ed0ef7138432f0f14981710aea8e83320 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:02 +0200 Subject: usb:hsotg:samsung: Use of regulator_bulk_* functions for USB regulators This commit adds support for supply voltage management for s3c-hsotg IP block. For that purpose a convenient regulator_bulk_* functions have been used. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Mark Brown Cc: Liam Girdwood Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 3484a09..e1a54d2 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -38,6 +39,11 @@ #define DMA_ADDR_INVALID (~((dma_addr_t)0)) +static const char * const s3c_hsotg_supply_names[] = { + "vusb_d", /* digital USB supply, 1.2V */ + "vusb_a", /* analog USB supply, 1.1V */ +}; + /* EP0_MPS_LIMIT * * Unfortunately there seems to be a limit of the amount of data that can @@ -132,6 +138,7 @@ struct s3c_hsotg_ep { * @regs: The memory area mapped for accessing registers. * @regs_res: The resource that was allocated when claiming register space. * @irq: The IRQ number we are using + * @supplies: Definition of USB power supplies * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. * @debug_root: root directrory for debugfs. * @debug_file: main status file for debugfs. @@ -152,6 +159,8 @@ struct s3c_hsotg { int irq; struct clk *clk; + struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)]; + unsigned int dedicated_fifos:1; struct dentry *debug_root; @@ -3256,6 +3265,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) struct resource *res; int epnum; int ret; + int i; plat = pdev->dev.platform_data; if (!plat) { @@ -3350,6 +3360,26 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) clk_enable(hsotg->clk); + /* regulators */ + + for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++) + hsotg->supplies[i].supply = s3c_hsotg_supply_names[i]; + + ret = regulator_bulk_get(dev, ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + if (ret) { + dev_err(dev, "failed to request supplies: %d\n", ret); + goto err_supplies; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + + if (ret) { + dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret); + goto err_supplies; + } + /* usb phy enable */ s3c_hsotg_phy_enable(hsotg); @@ -3362,7 +3392,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget); if (ret) - goto err_add_udc; + goto err_supplies; s3c_hsotg_create_debug(hsotg); @@ -3371,9 +3401,12 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) our_hsotg = hsotg; return 0; -err_add_udc: +err_supplies: s3c_hsotg_phy_disable(hsotg); + regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); + regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); + clk_disable(hsotg->clk); clk_put(hsotg->clk); @@ -3408,6 +3441,10 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) s3c_hsotg_phy_disable(hsotg); + + regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); + regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); + clk_disable(hsotg->clk); clk_put(hsotg->clk); -- cgit v0.10.2 From 71225beeeba2bde80aac02fadb5c197389fa12e4 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:03 +0200 Subject: usb:hsotg:samsung: NAK management for EP0 (Setup stage of control transfers) For SETUP stage of USB control transmission, the NAK shall NOT be CLEAR. The SNAK/CNAK control is crucial for this type of driver, since data arrives to earlier defined requests. Tested with: - DFU gadget (various size of the sent data - also packet = MPS) - Ethernet gadget (CDC and RNDIS) - Multi Function Gadget (g_multi) HW: - Samsung's C210 Universal rev.0 Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index e1a54d2..7b46af3 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -147,6 +147,7 @@ struct s3c_hsotg_ep { * @ep0_buff: Buffer for EP0 reply data, if needed. * @ctrl_buff: Buffer for EP0 control requests. * @ctrl_req: Request for EP0 control packets. + * @setup: NAK management for EP0 SETUP * @eps: The endpoints being supplied to the gadget framework */ struct s3c_hsotg { @@ -173,6 +174,7 @@ struct s3c_hsotg { u8 ctrl_buff[8]; struct usb_gadget gadget; + unsigned int setup; struct s3c_hsotg_ep eps[]; }; @@ -696,7 +698,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, } length = ureq->length - ureq->actual; - + dev_dbg(hsotg->dev, "ureq->length:%d ureq->actual:%d\n", + ureq->length, ureq->actual); if (0) dev_dbg(hsotg->dev, "REQ buf %p len %d dma 0x%08x noi=%d zp=%d snok=%d\n", @@ -762,7 +765,15 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */ ctrl |= S3C_DxEPCTL_USBActEp; - ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */ + + dev_dbg(hsotg->dev, "setup req:%d\n", hsotg->setup); + + /* For Setup request do not clear NAK */ + if (hsotg->setup && index == 0) + hsotg->setup = 0; + else + ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */ + dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); writel(ctrl, hsotg->regs + epctrl_reg); @@ -1527,6 +1538,12 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, if (req->actual < req->length && size_left == 0) { s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true); return; + } else if (epnum == 0) { + /* + * After was_setup = 1 => + * set CNAK for non Setup requests + */ + hsotg->setup = was_setup ? 0 : 1; } if (req->actual < req->length && req->short_not_ok) { -- cgit v0.10.2 From d3ca0259c56ee2dbc537d88a7496aba6b4712981 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:04 +0200 Subject: usb:hsotg:samsung: Sending ZLP packet for IN EP0 transfers This commit targets following scenarios for IN requests: 1. HOST requests e.g. 256B (which is a multiple of MPS = 64B). Then NO ZLP shall be sent, since host expects exact number of bytes. 2. HOST requested 4096B, but our data for sending is 256B. In this situation ZLP shall be send to tell HOST that no more data is available and it shall not wait for more data. This prevents HOST from hanging. Tested with: - DFU gadget (various size of the sent data - also packet = MPS) - Ethernet gadget (CDC and RNDIS) - Multi Function Gadget (g_multi) HW: - Samsung's C210 Universal rev.0 - Samsung's C110 GONI Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 7b46af3..0a74a06 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -1555,6 +1555,10 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, } if (epnum == 0) { + /* + * Condition req->complete != s3c_hsotg_complete_setup says: + * send ZLP when we have an asynchronous request from gadget + */ if (!was_setup && req->complete != s3c_hsotg_complete_setup) s3c_hsotg_send_zlp(hsotg, hs_req); } @@ -1809,6 +1813,13 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, return; } + /* Finish ZLP handling for IN EP0 transactions */ + if (hsotg->eps[0].sent_zlp) { + dev_dbg(hsotg->dev, "zlp packet received\n"); + s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0); + return; + } + /* Calculate the size of the transfer by checking how much is left * in the endpoint size register and then working it out from * the amount we loaded for the transfer. @@ -1828,9 +1839,28 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, __func__, hs_req->req.actual, size_done); hs_req->req.actual = size_done; + dev_dbg(hsotg->dev, "req->length:%d req->actual:%d req->zero:%d\n", + hs_req->req.length, hs_req->req.actual, hs_req->req.zero); + + /* + * Check if dealing with Maximum Packet Size(MPS) IN transfer at EP0 + * When sent data is a multiple MPS size (e.g. 64B ,128B ,192B + * ,256B ... ), after last MPS sized packet send IN ZLP packet to + * inform the host that no more data is available. + * The state of req.zero member is checked to be sure that the value to + * send is smaller than wValue expected from host. + * Check req.length to NOT send another ZLP when the current one is + * under completion (the one for which this completion has been called). + */ + if (hs_req->req.length && hs_ep->index == 0 && hs_req->req.zero && + hs_req->req.length == hs_req->req.actual && + !(hs_req->req.length % hs_ep->ep.maxpacket)) { + + dev_dbg(hsotg->dev, "ep0 zlp IN packet sent\n"); + s3c_hsotg_send_zlp(hsotg, hs_req); - /* if we did all of the transfer, and there is more data left - * around, then try restarting the rest of the request */ + return; + } if (!size_left && hs_req->req.actual < hs_req->req.length) { dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__); -- cgit v0.10.2 From 308d734e9ed86b6713da46b4b9ce9ff017e75c63 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:05 +0200 Subject: usb:hsotg:samsung: Extract core initialization function The s3c_hsotg_core_init function has been added to exclude code responsible for Samsung's SoCs USB core initialization. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 0a74a06..8d86528 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2139,6 +2139,178 @@ static struct s3c_hsotg *our_hsotg; S3C_GINTSTS_RxFLvl) /** + * s3c_hsotg_corereset - issue softreset to the core + * @hsotg: The device state + * + * Issue a soft reset to the core, and await the core finishing it. +*/ +static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) +{ + int timeout; + u32 grstctl; + + dev_dbg(hsotg->dev, "resetting core\n"); + + /* issue soft reset */ + writel(S3C_GRSTCTL_CSftRst, hsotg->regs + S3C_GRSTCTL); + + timeout = 1000; + do { + grstctl = readl(hsotg->regs + S3C_GRSTCTL); + } while ((grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0); + + if (grstctl & S3C_GRSTCTL_CSftRst) { + dev_err(hsotg->dev, "Failed to get CSftRst asserted\n"); + return -EINVAL; + } + + timeout = 1000; + + while (1) { + u32 grstctl = readl(hsotg->regs + S3C_GRSTCTL); + + if (timeout-- < 0) { + dev_info(hsotg->dev, + "%s: reset failed, GRSTCTL=%08x\n", + __func__, grstctl); + return -ETIMEDOUT; + } + + if (!(grstctl & S3C_GRSTCTL_AHBIdle)) + continue; + + break; /* reset done */ + } + + dev_dbg(hsotg->dev, "reset successful\n"); + return 0; +} + +static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) +{ + s3c_hsotg_corereset(hsotg); + + /* + * we must now enable ep0 ready for host detection and then + * set configuration. + */ + + /* set the PLL on, remove the HNP/SRP and set the PHY */ + writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | + (0x5 << 10), hsotg->regs + S3C_GUSBCFG); + + s3c_hsotg_init_fifo(hsotg); + + __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); + + writel(1 << 18 | S3C_DCFG_DevSpd_HS, hsotg->regs + S3C_DCFG); + + /* Clear any pending OTG interrupts */ + writel(0xffffffff, hsotg->regs + S3C_GOTGINT); + + /* Clear any pending interrupts */ + writel(0xffffffff, hsotg->regs + S3C_GINTSTS); + + writel(S3C_GINTSTS_DisconnInt | S3C_GINTSTS_SessReqInt | + S3C_GINTSTS_GOUTNakEff | S3C_GINTSTS_GINNakEff | + S3C_GINTSTS_ConIDStsChng | S3C_GINTSTS_USBRst | + S3C_GINTSTS_EnumDone | S3C_GINTSTS_OTGInt | + S3C_GINTSTS_USBSusp | S3C_GINTSTS_WkUpInt | + S3C_GINTSTS_ErlySusp, + hsotg->regs + S3C_GINTMSK); + + if (using_dma(hsotg)) + writel(S3C_GAHBCFG_GlblIntrEn | S3C_GAHBCFG_DMAEn | + S3C_GAHBCFG_HBstLen_Incr4, + hsotg->regs + S3C_GAHBCFG); + else + writel(S3C_GAHBCFG_GlblIntrEn, hsotg->regs + S3C_GAHBCFG); + + /* + * Enabling INTknTXFEmpMsk here seems to be a big mistake, we end + * up being flooded with interrupts if the host is polling the + * endpoint to try and read data. + */ + + writel(((hsotg->dedicated_fifos) ? S3C_DIEPMSK_TxFIFOEmpty : 0) | + S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk | + S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | + S3C_DIEPMSK_INTknEPMisMsk, + hsotg->regs + S3C_DIEPMSK); + + /* + * don't need XferCompl, we get that from RXFIFO in slave mode. In + * DMA mode we may need this. + */ + writel((using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk | + S3C_DIEPMSK_TimeOUTMsk) : 0) | + S3C_DOEPMSK_EPDisbldMsk | S3C_DOEPMSK_AHBErrMsk | + S3C_DOEPMSK_SetupMsk, + hsotg->regs + S3C_DOEPMSK); + + writel(0, hsotg->regs + S3C_DAINTMSK); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + S3C_DIEPCTL0), + readl(hsotg->regs + S3C_DOEPCTL0)); + + /* enable in and out endpoint interrupts */ + s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt); + + /* + * Enable the RXFIFO when in slave mode, as this is how we collect + * the data. In DMA mode, we get events from the FIFO but also + * things we cannot process, so do not use it. + */ + if (!using_dma(hsotg)) + s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_RxFLvl); + + /* Enable interrupts for EP0 in and out */ + s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1); + s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1); + + __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone); + udelay(10); /* see openiboot */ + __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone); + + dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL)); + + /* + * S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by + * writing to the EPCTL register.. + */ + + /* set to read 1 8byte packet */ + writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) | + S3C_DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0); + + writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | + S3C_DxEPCTL_CNAK | S3C_DxEPCTL_EPEna | + S3C_DxEPCTL_USBActEp, + hsotg->regs + S3C_DOEPCTL0); + + /* enable, but don't activate EP0in */ + writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | + S3C_DxEPCTL_USBActEp, hsotg->regs + S3C_DIEPCTL0); + + s3c_hsotg_enqueue_setup(hsotg); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + S3C_DIEPCTL0), + readl(hsotg->regs + S3C_DOEPCTL0)); + + /* clear global NAKs */ + writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK, + hsotg->regs + S3C_DCTL); + + /* must be at-least 3ms to allow bus to see disconnect */ + mdelay(3); + + /* remove the soft-disconnect and let's go */ + __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); +} + +/** * s3c_hsotg_irq - handle device interrupt * @irq: The IRQ number triggered * @pw: The pw value when registered the handler. @@ -2579,54 +2751,6 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = { }; /** - * s3c_hsotg_corereset - issue softreset to the core - * @hsotg: The device state - * - * Issue a soft reset to the core, and await the core finishing it. -*/ -static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) -{ - int timeout; - u32 grstctl; - - dev_dbg(hsotg->dev, "resetting core\n"); - - /* issue soft reset */ - writel(S3C_GRSTCTL_CSftRst, hsotg->regs + S3C_GRSTCTL); - - timeout = 1000; - do { - grstctl = readl(hsotg->regs + S3C_GRSTCTL); - } while ((grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0); - - if (grstctl & S3C_GRSTCTL_CSftRst) { - dev_err(hsotg->dev, "Failed to get CSftRst asserted\n"); - return -EINVAL; - } - - timeout = 1000; - - while (1) { - u32 grstctl = readl(hsotg->regs + S3C_GRSTCTL); - - if (timeout-- < 0) { - dev_info(hsotg->dev, - "%s: reset failed, GRSTCTL=%08x\n", - __func__, grstctl); - return -ETIMEDOUT; - } - - if (!(grstctl & S3C_GRSTCTL_AHBIdle)) - continue; - - break; /* reset done */ - } - - dev_dbg(hsotg->dev, "reset successful\n"); - return 0; -} - -/** * s3c_hsotg_phy_enable - enable platform phy dev * * @param: The driver state @@ -2706,119 +2830,7 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver, goto err; } - /* we must now enable ep0 ready for host detection and then - * set configuration. */ - - s3c_hsotg_corereset(hsotg); - - /* set the PLL on, remove the HNP/SRP and set the PHY */ - writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | - (0x5 << 10), hsotg->regs + S3C_GUSBCFG); - - /* looks like soft-reset changes state of FIFOs */ - s3c_hsotg_init_fifo(hsotg); - - __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); - - writel(1 << 18 | S3C_DCFG_DevSpd_HS, hsotg->regs + S3C_DCFG); - - /* Clear any pending OTG interrupts */ - writel(0xffffffff, hsotg->regs + S3C_GOTGINT); - - /* Clear any pending interrupts */ - writel(0xffffffff, hsotg->regs + S3C_GINTSTS); - - writel(S3C_GINTSTS_DisconnInt | S3C_GINTSTS_SessReqInt | - S3C_GINTSTS_ConIDStsChng | S3C_GINTSTS_USBRst | - S3C_GINTSTS_EnumDone | S3C_GINTSTS_OTGInt | - S3C_GINTSTS_USBSusp | S3C_GINTSTS_WkUpInt | - S3C_GINTSTS_GOUTNakEff | S3C_GINTSTS_GINNakEff | - S3C_GINTSTS_ErlySusp, - hsotg->regs + S3C_GINTMSK); - - if (using_dma(hsotg)) - writel(S3C_GAHBCFG_GlblIntrEn | S3C_GAHBCFG_DMAEn | - S3C_GAHBCFG_HBstLen_Incr4, - hsotg->regs + S3C_GAHBCFG); - else - writel(S3C_GAHBCFG_GlblIntrEn, hsotg->regs + S3C_GAHBCFG); - - /* Enabling INTknTXFEmpMsk here seems to be a big mistake, we end - * up being flooded with interrupts if the host is polling the - * endpoint to try and read data. */ - - writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | - S3C_DIEPMSK_INTknEPMisMsk | - S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk | - ((hsotg->dedicated_fifos) ? S3C_DIEPMSK_TxFIFOEmpty : 0), - hsotg->regs + S3C_DIEPMSK); - - /* don't need XferCompl, we get that from RXFIFO in slave mode. In - * DMA mode we may need this. */ - writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk | - S3C_DOEPMSK_EPDisbldMsk | - (using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk | - S3C_DIEPMSK_TimeOUTMsk) : 0), - hsotg->regs + S3C_DOEPMSK); - - writel(0, hsotg->regs + S3C_DAINTMSK); - - dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); - - /* enable in and out endpoint interrupts */ - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt); - - /* Enable the RXFIFO when in slave mode, as this is how we collect - * the data. In DMA mode, we get events from the FIFO but also - * things we cannot process, so do not use it. */ - if (!using_dma(hsotg)) - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_RxFLvl); - - /* Enable interrupts for EP0 in and out */ - s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1); - s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1); - - __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone); - udelay(10); /* see openiboot */ - __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone); - - dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL)); - - /* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by - writing to the EPCTL register.. */ - - /* set to read 1 8byte packet */ - writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) | - S3C_DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0); - - writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | - S3C_DxEPCTL_CNAK | S3C_DxEPCTL_EPEna | - S3C_DxEPCTL_USBActEp, - hsotg->regs + S3C_DOEPCTL0); - - /* enable, but don't activate EP0in */ - writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | - S3C_DxEPCTL_USBActEp, hsotg->regs + S3C_DIEPCTL0); - - s3c_hsotg_enqueue_setup(hsotg); - - dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); - - /* clear global NAKs */ - writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK, - hsotg->regs + S3C_DCTL); - - /* must be at-least 3ms to allow bus to see disconnect */ - msleep(3); - - /* remove the soft-disconnect and let's go */ - __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); - - /* report to the user, and return */ + s3c_hsotg_core_init(hsotg); dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name); return 0; -- cgit v0.10.2 From b3546c97c7bb89294fc3da2718b3fabe7ee4c579 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:06 +0200 Subject: usb:hsotg:samsung: Remove Disconnect Interrupt handler The USB Disconnect Interrupt handler, according to specification, is only working at HOST mode. Samsung SoCs (e.g. Exynos4) are working at device mode, so this interrupt is never caught. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 8d86528..d0e4fb3 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2211,12 +2211,11 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) /* Clear any pending interrupts */ writel(0xffffffff, hsotg->regs + S3C_GINTSTS); - writel(S3C_GINTSTS_DisconnInt | S3C_GINTSTS_SessReqInt | + writel(S3C_GINTSTS_ErlySusp | S3C_GINTSTS_SessReqInt | S3C_GINTSTS_GOUTNakEff | S3C_GINTSTS_GINNakEff | S3C_GINTSTS_ConIDStsChng | S3C_GINTSTS_USBRst | S3C_GINTSTS_EnumDone | S3C_GINTSTS_OTGInt | - S3C_GINTSTS_USBSusp | S3C_GINTSTS_WkUpInt | - S3C_GINTSTS_ErlySusp, + S3C_GINTSTS_USBSusp | S3C_GINTSTS_WkUpInt, hsotg->regs + S3C_GINTMSK); if (using_dma(hsotg)) @@ -2339,13 +2338,6 @@ irq_retry: writel(otgint, hsotg->regs + S3C_GOTGINT); } - if (gintsts & S3C_GINTSTS_DisconnInt) { - dev_dbg(hsotg->dev, "%s: DisconnInt\n", __func__); - writel(S3C_GINTSTS_DisconnInt, hsotg->regs + S3C_GINTSTS); - - s3c_hsotg_disconnect_irq(hsotg); - } - if (gintsts & S3C_GINTSTS_SessReqInt) { dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__); writel(S3C_GINTSTS_SessReqInt, hsotg->regs + S3C_GINTSTS); -- cgit v0.10.2 From 5e891342fd0761fed36c187587115e706c0fa358 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:07 +0200 Subject: usb:hsotg:samsung: Rename s3c_hsotg_disconnect function The s3c_hsotg_disconnect_irq function has been renamed to reflect, that it can be used not only during the host disconnect irq. The s3c_hsotg_disconnect shall be used as a fall back for scenario when USB cable is unplugged and plugged to the device. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index d0e4fb3..7e3b591 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2086,14 +2086,14 @@ static void kill_all_requests(struct s3c_hsotg *hsotg, (_hs)->driver->_entry(&(_hs)->gadget); /** - * s3c_hsotg_disconnect_irq - disconnect irq service + * s3c_hsotg_disconnect - disconnect service * @hsotg: The device state. * - * A disconnect IRQ has been received, meaning that the host has - * lost contact with the bus. Remove all current transactions - * and signal the gadget driver that this has happened. + * The device has been disconnected. Remove all current + * transactions and signal the gadget driver that this + * has happened. */ -static void s3c_hsotg_disconnect_irq(struct s3c_hsotg *hsotg) +static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg) { unsigned ep; -- cgit v0.10.2 From 12a1f4dc0dfe4c72e565dc02d6a1c021f3f98b61 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:08 +0200 Subject: usb:hsotg:samsung: Cable disconnection recovery code This code allows Samsung SoC's to recover its state when device is disconnected and connected during transfer. It is necessary, in such a scenario, to reinitialize the USB core to assure correct initial state of the driver. This operation is needed since the disconnect interrupt is only available at HOST mode, which is not supported by this driver. A simple mechanism with jiffies has been used to perform core reset only once. Tested with: - DFU gadget (various size of the sent data - also packet = MPS) - Ethernet gadget (CDC and RNDIS) - Multi Function Gadget (g_multi) HW: - Samsung's C210 Universal rev.0 Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 7e3b591..ca90416 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -148,6 +148,7 @@ struct s3c_hsotg_ep { * @ctrl_buff: Buffer for EP0 control requests. * @ctrl_req: Request for EP0 control packets. * @setup: NAK management for EP0 SETUP + * @last_rst: Time of last reset * @eps: The endpoints being supplied to the gadget framework */ struct s3c_hsotg { @@ -175,6 +176,7 @@ struct s3c_hsotg { struct usb_gadget gadget; unsigned int setup; + unsigned long last_rst; struct s3c_hsotg_ep eps[]; }; @@ -2377,23 +2379,26 @@ irq_retry: } if (gintsts & S3C_GINTSTS_USBRst) { + + u32 usb_status = readl(hsotg->regs + S3C_GOTGCTL); + dev_info(hsotg->dev, "%s: USBRst\n", __func__); dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n", readl(hsotg->regs + S3C_GNPTXSTS)); writel(S3C_GINTSTS_USBRst, hsotg->regs + S3C_GINTSTS); - kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true); + if (usb_status & S3C_GOTGCTL_BSESVLD) { + if (time_after(jiffies, hsotg->last_rst + + msecs_to_jiffies(200))) { - /* it seems after a reset we can end up with a situation - * where the TXFIFO still has data in it... the docs - * suggest resetting all the fifos, so use the init_fifo - * code to relayout and flush the fifos. - */ + kill_all_requests(hsotg, &hsotg->eps[0], + -ECONNRESET, true); - s3c_hsotg_init_fifo(hsotg); - - s3c_hsotg_enqueue_setup(hsotg); + s3c_hsotg_core_init(hsotg); + hsotg->last_rst = jiffies; + } + } } /* check both FIFOs */ @@ -2436,6 +2441,7 @@ irq_retry: writel(S3C_GINTSTS_USBSusp, hsotg->regs + S3C_GINTSTS); call_gadget(hsotg, suspend); + s3c_hsotg_disconnect(hsotg); } if (gintsts & S3C_GINTSTS_WkUpInt) { @@ -2448,6 +2454,8 @@ irq_retry: if (gintsts & S3C_GINTSTS_ErlySusp) { dev_dbg(hsotg->dev, "S3C_GINTSTS_ErlySusp\n"); writel(S3C_GINTSTS_ErlySusp, hsotg->regs + S3C_GINTSTS); + + s3c_hsotg_disconnect(hsotg); } /* these next two seem to crop-up occasionally causing the core @@ -2823,7 +2831,7 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver, } s3c_hsotg_core_init(hsotg); - + hsotg->last_rst = jiffies; dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name); return 0; -- cgit v0.10.2 From b3f489b2b658e530f5cdefe4d38c60cf13453e43 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:09 +0200 Subject: usb:hsotg:samsung: Determine number of EPs from HW configuration register This commit adds support for determining of EPs number during run time. Configuration is read from a HW configuration register in a specially created s3c_hsotg_hw_cfg function. Moreover it was necessary to defer at probe allocation of the struct s3c_hsotg_ep instances until number of endpoints is known. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index ca90416..84793a0 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -128,8 +128,6 @@ struct s3c_hsotg_ep { char name[10]; }; -#define S3C_HSOTG_EPS (8+1) /* limit to 9 for the moment */ - /** * struct s3c_hsotg - driver state. * @dev: The parent device supplied to the probe function @@ -140,6 +138,7 @@ struct s3c_hsotg_ep { * @irq: The IRQ number we are using * @supplies: Definition of USB power supplies * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. + * @num_of_eps: Number of available EPs (excluding EP0) * @debug_root: root directrory for debugfs. * @debug_file: main status file for debugfs. * @debug_fifo: FIFO status file for debugfs. @@ -164,6 +163,7 @@ struct s3c_hsotg { struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)]; unsigned int dedicated_fifos:1; + unsigned char num_of_eps; struct dentry *debug_root; struct dentry *debug_file; @@ -177,7 +177,7 @@ struct s3c_hsotg { struct usb_gadget gadget; unsigned int setup; unsigned long last_rst; - struct s3c_hsotg_ep eps[]; + struct s3c_hsotg_ep *eps; }; /** @@ -952,7 +952,7 @@ static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg, if (windex >= 0x100) return NULL; - if (idx > S3C_HSOTG_EPS) + if (idx > hsotg->num_of_eps) return NULL; if (idx && ep->dir_in != dir) @@ -2036,7 +2036,7 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) if (ep0_mps) { int i; s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps); - for (i = 1; i < S3C_HSOTG_EPS; i++) + for (i = 1; i < hsotg->num_of_eps; i++) s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps); } @@ -2099,7 +2099,7 @@ static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg) { unsigned ep; - for (ep = 0; ep < S3C_HSOTG_EPS; ep++) + for (ep = 0; ep < hsotg->num_of_eps; ep++) kill_all_requests(hsotg, &hsotg->eps[ep], -ESHUTDOWN, true); call_gadget(hsotg, disconnect); @@ -2117,7 +2117,7 @@ static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic) /* look through for any more data to transmit */ - for (epno = 0; epno < S3C_HSOTG_EPS; epno++) { + for (epno = 0; epno < hsotg->num_of_eps; epno++) { ep = &hsotg->eps[epno]; if (!ep->dir_in) @@ -2783,6 +2783,45 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg) hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); } +static void s3c_hsotg_init(struct s3c_hsotg *hsotg) +{ + /* unmask subset of endpoint interrupts */ + + writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | + S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk, + hsotg->regs + S3C_DIEPMSK); + + writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk | + S3C_DOEPMSK_EPDisbldMsk | S3C_DOEPMSK_XferComplMsk, + hsotg->regs + S3C_DOEPMSK); + + writel(0, hsotg->regs + S3C_DAINTMSK); + + /* Be in disconnected state until gadget is registered */ + __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); + + if (0) { + /* post global nak until we're ready */ + writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak, + hsotg->regs + S3C_DCTL); + } + + /* setup fifos */ + + dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", + readl(hsotg->regs + S3C_GRXFSIZ), + readl(hsotg->regs + S3C_GNPTXFSIZ)); + + s3c_hsotg_init_fifo(hsotg); + + /* set the PLL on, remove the HNP/SRP and set the PHY */ + writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | (0x5 << 10), + hsotg->regs + S3C_GUSBCFG); + + writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0, + hsotg->regs + S3C_GAHBCFG); +} + static int s3c_hsotg_start(struct usb_gadget_driver *driver, int (*bind)(struct usb_gadget *)) { @@ -2853,7 +2892,7 @@ static int s3c_hsotg_stop(struct usb_gadget_driver *driver) return -EINVAL; /* all endpoints should be shutdown */ - for (ep = 0; ep < S3C_HSOTG_EPS; ep++) + for (ep = 0; ep < hsotg->num_of_eps; ep++) s3c_hsotg_ep_disable(&hsotg->eps[ep].ep); call_gadget(hsotg, disconnect); @@ -2944,53 +2983,28 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, } } -static void s3c_hsotg_init(struct s3c_hsotg *hsotg) +/** + * s3c_hsotg_hw_cfg - read HW configuration registers + * @param: The device state + * + * Read the USB core HW configuration registers + */ +static void s3c_hsotg_hw_cfg(struct s3c_hsotg *hsotg) { - u32 cfg4; - - /* unmask subset of endpoint interrupts */ - - writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | - S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk, - hsotg->regs + S3C_DIEPMSK); - - writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk | - S3C_DOEPMSK_EPDisbldMsk | S3C_DOEPMSK_XferComplMsk, - hsotg->regs + S3C_DOEPMSK); - - writel(0, hsotg->regs + S3C_DAINTMSK); - - /* Be in disconnected state until gadget is registered */ - __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); - - if (0) { - /* post global nak until we're ready */ - writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak, - hsotg->regs + S3C_DCTL); - } - - /* setup fifos */ - - dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", - readl(hsotg->regs + S3C_GRXFSIZ), - readl(hsotg->regs + S3C_GNPTXFSIZ)); - - s3c_hsotg_init_fifo(hsotg); - - /* set the PLL on, remove the HNP/SRP and set the PHY */ - writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | (0x5 << 10), - hsotg->regs + S3C_GUSBCFG); + u32 cfg2, cfg4; + /* check hardware configuration */ - writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0, - hsotg->regs + S3C_GAHBCFG); + cfg2 = readl(hsotg->regs + 0x48); + hsotg->num_of_eps = (cfg2 >> 10) & 0xF; - /* check hardware configuration */ + dev_info(hsotg->dev, "EPs:%d\n", hsotg->num_of_eps); cfg4 = readl(hsotg->regs + 0x50); hsotg->dedicated_fifos = (cfg4 >> 25) & 1; dev_info(hsotg->dev, "%s fifos\n", hsotg->dedicated_fifos ? "dedicated" : "shared"); + } static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) @@ -3284,7 +3298,7 @@ static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) /* create one file for each endpoint */ - for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) { + for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { struct s3c_hsotg_ep *ep = &hsotg->eps[epidx]; ep->debugfs = debugfs_create_file(ep->name, 0444, @@ -3306,7 +3320,7 @@ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) { unsigned epidx; - for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) { + for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { struct s3c_hsotg_ep *ep = &hsotg->eps[epidx]; debugfs_remove(ep->debugfs); } @@ -3320,6 +3334,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) { struct s3c_hsotg_plat *plat = pdev->dev.platform_data; struct device *dev = &pdev->dev; + struct s3c_hsotg_ep *eps; struct s3c_hsotg *hsotg; struct resource *res; int epnum; @@ -3332,9 +3347,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) return -EINVAL; } - hsotg = kzalloc(sizeof(struct s3c_hsotg) + - sizeof(struct s3c_hsotg_ep) * S3C_HSOTG_EPS, - GFP_KERNEL); + hsotg = kzalloc(sizeof(struct s3c_hsotg), GFP_KERNEL); if (!hsotg) { dev_err(dev, "cannot get memory\n"); return -ENOMEM; @@ -3401,20 +3414,6 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) hsotg->gadget.dev.parent = dev; hsotg->gadget.dev.dma_mask = dev->dma_mask; - /* setup endpoint information */ - - INIT_LIST_HEAD(&hsotg->gadget.ep_list); - hsotg->gadget.ep0 = &hsotg->eps[0].ep; - - /* allocate EP0 request */ - - hsotg->ctrl_req = s3c_hsotg_ep_alloc_request(&hsotg->eps[0].ep, - GFP_KERNEL); - if (!hsotg->ctrl_req) { - dev_err(dev, "failed to allocate ctrl req\n"); - goto err_regs; - } - /* reset the system */ clk_enable(hsotg->clk); @@ -3444,14 +3443,45 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) s3c_hsotg_corereset(hsotg); s3c_hsotg_init(hsotg); + s3c_hsotg_hw_cfg(hsotg); + + /* hsotg->num_of_eps holds number of EPs other than ep0 */ + + if (hsotg->num_of_eps == 0) { + dev_err(dev, "wrong number of EPs (zero)\n"); + goto err_supplies; + } + + eps = kcalloc(hsotg->num_of_eps + 1, sizeof(struct s3c_hsotg_ep), + GFP_KERNEL); + if (!eps) { + dev_err(dev, "cannot get memory\n"); + goto err_supplies; + } + + hsotg->eps = eps; + + /* setup endpoint information */ + + INIT_LIST_HEAD(&hsotg->gadget.ep_list); + hsotg->gadget.ep0 = &hsotg->eps[0].ep; + + /* allocate EP0 request */ + + hsotg->ctrl_req = s3c_hsotg_ep_alloc_request(&hsotg->eps[0].ep, + GFP_KERNEL); + if (!hsotg->ctrl_req) { + dev_err(dev, "failed to allocate ctrl req\n"); + goto err_ep_mem; + } /* initialise the endpoints now the core has been initialised */ - for (epnum = 0; epnum < S3C_HSOTG_EPS; epnum++) + for (epnum = 0; epnum < hsotg->num_of_eps; epnum++) s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum); ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget); if (ret) - goto err_supplies; + goto err_ep_mem; s3c_hsotg_create_debug(hsotg); @@ -3460,6 +3490,9 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) our_hsotg = hsotg; return 0; + err_ep_mem: + kfree(eps); + err_supplies: s3c_hsotg_phy_disable(hsotg); -- cgit v0.10.2 From f65f0f109878d795854a0a879d5029c7ea560867 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:10 +0200 Subject: usb:hsotg:samsung: Use new udc_start and udc_stop callbacks Replace of deprecated start and stop callbacks with a udc_start and udc_stop ones. Now the bind from composite driver is NOT called explicitly, so more work needs to be done at s3c_udc_probe. Especially enabling SoC clocks and power for runtime determination of EP number. After probing, those sources are disabled and enabled again at udc_start and pullup afterwards. Signed-off-by: Lukasz Majewski Signed-off-by: Sangwook Lee Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 84793a0..b785ead 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2822,8 +2822,8 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) hsotg->regs + S3C_GAHBCFG); } -static int s3c_hsotg_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int s3c_hsotg_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { struct s3c_hsotg *hsotg = our_hsotg; int ret; @@ -2841,7 +2841,7 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver, if (driver->max_speed < USB_SPEED_FULL) dev_err(hsotg->dev, "%s: bad speed\n", __func__); - if (!bind || !driver->setup) { + if (!driver->setup) { dev_err(hsotg->dev, "%s: missing entry points\n", __func__); return -EINVAL; } @@ -2854,20 +2854,14 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver, hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask; hsotg->gadget.speed = USB_SPEED_UNKNOWN; - ret = device_add(&hsotg->gadget.dev); + ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); if (ret) { - dev_err(hsotg->dev, "failed to register gadget device\n"); + dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret); goto err; } - ret = bind(&hsotg->gadget); - if (ret) { - dev_err(hsotg->dev, "failed bind %s\n", driver->driver.name); - - hsotg->gadget.dev.driver = NULL; - hsotg->driver = NULL; - goto err; - } + s3c_hsotg_phy_enable(hsotg); s3c_hsotg_core_init(hsotg); hsotg->last_rst = jiffies; @@ -2880,7 +2874,8 @@ err: return ret; } -static int s3c_hsotg_stop(struct usb_gadget_driver *driver) +static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { struct s3c_hsotg *hsotg = our_hsotg; int ep; @@ -2895,13 +2890,12 @@ static int s3c_hsotg_stop(struct usb_gadget_driver *driver) for (ep = 0; ep < hsotg->num_of_eps; ep++) s3c_hsotg_ep_disable(&hsotg->eps[ep].ep); - call_gadget(hsotg, disconnect); + s3c_hsotg_phy_disable(hsotg); + regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); - driver->unbind(&hsotg->gadget); hsotg->driver = NULL; hsotg->gadget.speed = USB_SPEED_UNKNOWN; - - device_del(&hsotg->gadget.dev); + hsotg->gadget.dev.driver = NULL; dev_info(hsotg->dev, "unregistered gadget driver '%s'\n", driver->driver.name); @@ -2916,8 +2910,8 @@ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget) static struct usb_gadget_ops s3c_hsotg_gadget_ops = { .get_frame = s3c_hsotg_gadget_getframe, - .start = s3c_hsotg_start, - .stop = s3c_hsotg_stop, + .udc_start = s3c_hsotg_udc_start, + .udc_stop = s3c_hsotg_udc_stop, }; /** @@ -3479,6 +3473,23 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) for (epnum = 0; epnum < hsotg->num_of_eps; epnum++) s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum); + /* disable power and clock */ + + ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + if (ret) { + dev_err(hsotg->dev, "failed to disable supplies: %d\n", ret); + goto err_ep_mem; + } + + s3c_hsotg_phy_disable(hsotg); + + ret = device_add(&hsotg->gadget.dev); + if (ret) { + put_device(&hsotg->gadget.dev); + goto err_ep_mem; + } + ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget); if (ret) goto err_ep_mem; @@ -3496,7 +3507,6 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) err_supplies: s3c_hsotg_phy_disable(hsotg); - regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); clk_disable(hsotg->clk); @@ -3523,7 +3533,10 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) s3c_hsotg_delete_debug(hsotg); - usb_gadget_unregister_driver(hsotg->driver); + if (hsotg->driver) { + /* should have been done already by driver model core */ + usb_gadget_unregister_driver(hsotg->driver); + } free_irq(hsotg->irq, hsotg); iounmap(hsotg->regs); @@ -3532,14 +3545,12 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) kfree(hsotg->regs_res); s3c_hsotg_phy_disable(hsotg); - - - regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); clk_disable(hsotg->clk); clk_put(hsotg->clk); + device_unregister(&hsotg->gadget.dev); kfree(hsotg); return 0; } -- cgit v0.10.2 From 8b9bc4608eefebd9958911017caac8d87e2e8b3c Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:11 +0200 Subject: usb:hsotg:samsung: Comments reorganization and cleanup Refactor all comments to comply with kernel codding style. Moreover doxygen descriptions have been added for selected functions. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index b785ead..710823b 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -1,4 +1,5 @@ -/* linux/drivers/usb/gadget/s3c-hsotg.c +/** + * linux/drivers/usb/gadget/s3c-hsotg.c * * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -13,7 +14,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ #include #include @@ -44,7 +45,8 @@ static const char * const s3c_hsotg_supply_names[] = { "vusb_a", /* analog USB supply, 1.1V */ }; -/* EP0_MPS_LIMIT +/* + * EP0_MPS_LIMIT * * Unfortunately there seems to be a limit of the amount of data that can * be transferred by IN transactions on EP0. This is either 127 bytes or 3 @@ -324,13 +326,6 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) int timeout; u32 val; - /* the ryu 2.6.24 release ahs - writel(0x1C0, hsotg->regs + S3C_GRXFSIZ); - writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) | - S3C_GNPTXFSIZ_NPTxFDep(0x1C0), - hsotg->regs + S3C_GNPTXFSIZ); - */ - /* set FIFO sizes to 2048/1024 */ writel(2048, hsotg->regs + S3C_GRXFSIZ); @@ -338,17 +333,21 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) S3C_GNPTXFSIZ_NPTxFDep(1024), hsotg->regs + S3C_GNPTXFSIZ); - /* arange all the rest of the TX FIFOs, as some versions of this + /* + * arange all the rest of the TX FIFOs, as some versions of this * block have overlapping default addresses. This also ensures * that if the settings have been changed, then they are set to - * known values. */ + * known values. + */ /* start at the end of the GNPTXFSIZ, rounded up */ addr = 2048 + 1024; size = 768; - /* currently we allocate TX FIFOs for all possible endpoints, - * and assume that they are all the same size. */ + /* + * currently we allocate TX FIFOs for all possible endpoints, + * and assume that they are all the same size. + */ for (ep = 1; ep <= 15; ep++) { val = addr; @@ -358,8 +357,10 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) writel(val, hsotg->regs + S3C_DPTXFSIZn(ep)); } - /* according to p428 of the design guide, we need to ensure that - * all fifos are flushed before continuing */ + /* + * according to p428 of the design guide, we need to ensure that + * all fifos are flushed before continuing + */ writel(S3C_GRSTCTL_TxFNum(0x10) | S3C_GRSTCTL_TxFFlsh | S3C_GRSTCTL_RxFFlsh, hsotg->regs + S3C_GRSTCTL); @@ -425,7 +426,7 @@ static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep) * * This is the reverse of s3c_hsotg_map_dma(), called for the completion * of a request to ensure the buffer is ready for access by the caller. -*/ + */ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req) @@ -466,7 +467,7 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, * otherwise -ENOSPC is returned if the FIFO space was used up. * * This routine is only needed for PIO -*/ + */ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req) @@ -490,12 +491,15 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, int size_left; int size_done; - /* work out how much data was loaded so we can calculate - * how much data is left in the fifo. */ + /* + * work out how much data was loaded so we can calculate + * how much data is left in the fifo. + */ size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); - /* if shared fifo, we cannot write anything until the + /* + * if shared fifo, we cannot write anything until the * previous data has been completely sent. */ if (hs_ep->fifo_load != 0) { @@ -545,16 +549,19 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n", __func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket); - /* limit to 512 bytes of data, it seems at least on the non-periodic + /* + * limit to 512 bytes of data, it seems at least on the non-periodic * FIFO, requests of >512 cause the endpoint to get stuck with a * fragment of the end of the transfer in it. */ if (can_write > 512) can_write = 512; - /* limit the write to one max-packet size worth of data, but allow + /* + * limit the write to one max-packet size worth of data, but allow * the transfer to return that it did not run out of fifo space - * doing it. */ + * doing it. + */ if (to_write > hs_ep->ep.maxpacket) { to_write = hs_ep->ep.maxpacket; @@ -569,8 +576,8 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, to_write = can_write; pkt_round = to_write % hs_ep->ep.maxpacket; - /* Not sure, but we probably shouldn't be writing partial - * packets into the FIFO, so round the write down to an + /* + * Round the write down to an * exact number of packets. * * Note, we do not currently check to see if we can ever @@ -580,8 +587,10 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, if (pkt_round) to_write -= pkt_round; - /* enable correct FIFO interrupt to alert us when there - * is more room left. */ + /* + * enable correct FIFO interrupt to alert us when there + * is more room left. + */ s3c_hsotg_en_gsint(hsotg, periodic ? S3C_GINTSTS_PTxFEmp : @@ -636,8 +645,10 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep) maxpkt--; maxsize--; - /* constrain by packet count if maxpkts*pktsize is greater - * than the length register size. */ + /* + * constrain by packet count if maxpkts*pktsize is greater + * than the length register size. + */ if ((maxpkt * hs_ep->ep.maxpacket) < maxsize) maxsize = maxpkt * hs_ep->ep.maxpacket; @@ -733,8 +744,10 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, epsize = 0; if (index != 0 && ureq->zero) { - /* test for the packets being exactly right for the - * transfer */ + /* + * test for the packets being exactly right for the + * transfer + */ if (length == (packets * hs_ep->ep.maxpacket)) packets++; @@ -755,8 +768,10 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, if (using_dma(hsotg) && !continuing) { unsigned int dma_reg; - /* write DMA address to control register, buffer already - * synced by s3c_hsotg_ep_queue(). */ + /* + * write DMA address to control register, buffer already + * synced by s3c_hsotg_ep_queue(). + */ dma_reg = dir_in ? S3C_DIEPDMA(index) : S3C_DOEPDMA(index); writel(ureq->dma, hsotg->regs + dma_reg); @@ -780,9 +795,11 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); writel(ctrl, hsotg->regs + epctrl_reg); - /* set these, it seems that DMA support increments past the end + /* + * set these, it seems that DMA support increments past the end * of the packet buffer so we need to calculate the length from - * this information. */ + * this information. + */ hs_ep->size_loaded = length; hs_ep->last_load = ureq->actual; @@ -793,14 +810,18 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req); } - /* clear the INTknTXFEmpMsk when we start request, more as a aide - * to debugging to see what is going on. */ + /* + * clear the INTknTXFEmpMsk when we start request, more as a aide + * to debugging to see what is going on. + */ if (dir_in) writel(S3C_DIEPMSK_INTknTXFEmpMsk, hsotg->regs + S3C_DIEPINT(index)); - /* Note, trying to clear the NAK here causes problems with transmit - * on the S3C6400 ending up with the TXFIFO becoming full. */ + /* + * Note, trying to clear the NAK here causes problems with transmit + * on the S3C6400 ending up with the TXFIFO becoming full. + */ /* check ep is enabled */ if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna)) @@ -823,7 +844,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, * then ensure the buffer has been synced to memory. If our buffer has no * DMA memory, then we map the memory and mark our request to allow us to * cleanup on completion. -*/ + */ static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct usb_request *req) @@ -941,7 +962,7 @@ static void s3c_hsotg_complete_oursetup(struct usb_ep *ep, * * Convert the given wIndex into a pointer to an driver endpoint * structure, or return NULL if it is not a valid endpoint. -*/ + */ static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg, u32 windex) { @@ -1170,14 +1191,18 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, ctrl->bRequest, ctrl->bRequestType, ctrl->wValue, ctrl->wLength); - /* record the direction of the request, for later use when enquing - * packets onto EP0. */ + /* + * record the direction of the request, for later use when enquing + * packets onto EP0. + */ ep0->dir_in = (ctrl->bRequestType & USB_DIR_IN) ? 1 : 0; dev_dbg(hsotg->dev, "ctrl: dir_in=%d\n", ep0->dir_in); - /* if we've no data with this request, then the last part of the - * transaction is going to implicitly be IN. */ + /* + * if we've no data with this request, then the last part of the + * transaction is going to implicitly be IN. + */ if (ctrl->wLength == 0) ep0->dir_in = 1; @@ -1213,7 +1238,8 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret); } - /* the request is either unhandlable, or is not formatted correctly + /* + * the request is either unhandlable, or is not formatted correctly * so respond with a STALL for the status stage to indicate failure. */ @@ -1224,8 +1250,10 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in); reg = (ep0->dir_in) ? S3C_DIEPCTL0 : S3C_DOEPCTL0; - /* S3C_DxEPCTL_Stall will be cleared by EP once it has - * taken effect, so no need to clear later. */ + /* + * S3C_DxEPCTL_Stall will be cleared by EP once it has + * taken effect, so no need to clear later. + */ ctrl = readl(hsotg->regs + reg); ctrl |= S3C_DxEPCTL_Stall; @@ -1236,8 +1264,10 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n", ctrl, reg, readl(hsotg->regs + reg)); - /* don't believe we need to anything more to get the EP - * to reply with a STALL packet */ + /* + * don't believe we need to anything more to get the EP + * to reply with a STALL packet + */ } } @@ -1298,8 +1328,10 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg) ret = s3c_hsotg_ep_queue(&hsotg->eps[0].ep, req, GFP_ATOMIC); if (ret < 0) { dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret); - /* Don't think there's much we can do other than watch the - * driver fail. */ + /* + * Don't think there's much we can do other than watch the + * driver fail. + */ } } @@ -1315,7 +1347,7 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg) * on the endpoint. * * Note, expects the ep to already be locked as appropriate. -*/ + */ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req, @@ -1331,8 +1363,10 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n", hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete); - /* only replace the status if we've not already set an error - * from a previous transaction */ + /* + * only replace the status if we've not already set an error + * from a previous transaction + */ if (hs_req->req.status == -EINPROGRESS) hs_req->req.status = result; @@ -1343,8 +1377,10 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, if (using_dma(hsotg)) s3c_hsotg_unmap_dma(hsotg, hs_ep, hs_req); - /* call the complete request with the locks off, just in case the - * request tries to queue more work for this endpoint. */ + /* + * call the complete request with the locks off, just in case the + * request tries to queue more work for this endpoint. + */ if (hs_req->req.complete) { spin_unlock(&hs_ep->lock); @@ -1352,9 +1388,11 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, spin_lock(&hs_ep->lock); } - /* Look to see if there is anything else to do. Note, the completion + /* + * Look to see if there is anything else to do. Note, the completion * of the previous request may have caused a new request to be started - * so be careful when doing this. */ + * so be careful when doing this. + */ if (!hs_ep->req && result >= 0) { restart = !list_empty(&hs_ep->queue); @@ -1374,7 +1412,7 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, * * See s3c_hsotg_complete_request(), but called with the endpoint's * lock held. -*/ + */ static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req, @@ -1431,7 +1469,8 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) __func__, to_read, max_req, read_ptr, hs_req->req.length); if (to_read > max_req) { - /* more data appeared than we where willing + /* + * more data appeared than we where willing * to deal with in this request. */ @@ -1443,8 +1482,10 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) hs_req->req.actual += to_read; to_read = DIV_ROUND_UP(to_read, 4); - /* note, we might over-write the buffer end by 3 bytes depending on - * alignment of the data. */ + /* + * note, we might over-write the buffer end by 3 bytes depending on + * alignment of the data. + */ readsl(fifo, hs_req->req.buf + read_ptr, to_read); spin_unlock(&hs_ep->lock); @@ -1503,7 +1544,7 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, * The RXFIFO has delivered an OutDone event, which means that the data * transfer for an OUT endpoint has been completed, either by a short * packet or by the finish of a transfer. -*/ + */ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, int epnum, bool was_setup) { @@ -1522,7 +1563,8 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, if (using_dma(hsotg)) { unsigned size_done; - /* Calculate the size of the transfer by checking how much + /* + * Calculate the size of the transfer by checking how much * is left in the endpoint size register and then working it * out from the amount we loaded for the transfer. * @@ -1552,8 +1594,10 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n", __func__, req->actual, req->length); - /* todo - what should we return here? there's no one else - * even bothering to check the status. */ + /* + * todo - what should we return here? there's no one else + * even bothering to check the status. + */ } if (epnum == 0) { @@ -1573,7 +1617,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, * @hsotg: The device instance * * Return the current frame number -*/ + */ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg) { u32 dsts; @@ -1667,7 +1711,7 @@ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) /** * s3c_hsotg_ep0_mps - turn max packet size into register setting * @mps: The maximum packet size in bytes. -*/ + */ static u32 s3c_hsotg_ep0_mps(unsigned int mps) { switch (mps) { @@ -1717,8 +1761,10 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, hs_ep->ep.maxpacket = mps; - /* update both the in and out endpoint controldir_ registers, even - * if one of the directions may not be in use. */ + /* + * update both the in and out endpoint controldir_ registers, even + * if one of the directions may not be in use. + */ reg = readl(regs + S3C_DIEPCTL(ep)); reg &= ~S3C_DxEPCTL_MPS_MASK; @@ -1822,7 +1868,8 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, return; } - /* Calculate the size of the transfer by checking how much is left + /* + * Calculate the size of the transfer by checking how much is left * in the endpoint size register and then working it out from * the amount we loaded for the transfer. * @@ -1878,7 +1925,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, * @dir_in: Set if this is an IN endpoint * * Process and clear any interrupt pending for an individual endpoint -*/ + */ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, int dir_in) { @@ -1902,16 +1949,20 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, __func__, readl(hsotg->regs + epctl_reg), readl(hsotg->regs + epsiz_reg)); - /* we get OutDone from the FIFO, so we only need to look - * at completing IN requests here */ + /* + * we get OutDone from the FIFO, so we only need to look + * at completing IN requests here + */ if (dir_in) { s3c_hsotg_complete_in(hsotg, hs_ep); if (idx == 0 && !hs_ep->req) s3c_hsotg_enqueue_setup(hsotg); } else if (using_dma(hsotg)) { - /* We're using DMA, we need to fire an OutDone here - * as we ignore the RXFIFO. */ + /* + * We're using DMA, we need to fire an OutDone here + * as we ignore the RXFIFO. + */ s3c_hsotg_handle_outdone(hsotg, idx, false); } @@ -1942,10 +1993,12 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__); if (using_dma(hsotg) && idx == 0) { - /* this is the notification we've received a + /* + * this is the notification we've received a * setup packet. In non-DMA mode we'd get this * from the RXFIFO, instead we need to process - * the setup here. */ + * the setup here. + */ if (dir_in) WARN_ON_ONCE(1); @@ -1958,8 +2011,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__); if (dir_in) { - /* not sure if this is important, but we'll clear it anyway - */ + /* not sure if this is important, but we'll clear it anyway */ if (ints & S3C_DIEPMSK_INTknTXFEmpMsk) { dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n", __func__, idx); @@ -1988,21 +2040,25 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, * * Handle updating the device settings after the enumeration phase has * been completed. -*/ + */ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) { u32 dsts = readl(hsotg->regs + S3C_DSTS); int ep0_mps = 0, ep_mps; - /* This should signal the finish of the enumeration phase + /* + * This should signal the finish of the enumeration phase * of the USB handshaking, so we should now know what rate - * we connected at. */ + * we connected at. + */ dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts); - /* note, since we're limited by the size of transfer on EP0, and + /* + * note, since we're limited by the size of transfer on EP0, and * it seems IN transfers must be a even number of packets we do - * not advertise a 64byte MPS on EP0. */ + * not advertise a 64byte MPS on EP0. + */ /* catch both EnumSpd_FS and EnumSpd_FS48 */ switch (dsts & S3C_DSTS_EnumSpd_MASK) { @@ -2021,7 +2077,8 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) case S3C_DSTS_EnumSpd_LS: hsotg->gadget.speed = USB_SPEED_LOW; - /* note, we don't actually support LS in this driver at the + /* + * note, we don't actually support LS in this driver at the * moment, and the documentation seems to imply that it isn't * supported by the PHYs on some of the devices. */ @@ -2030,8 +2087,10 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) dev_info(hsotg->dev, "new device is %s\n", usb_speed_string(hsotg->gadget.speed)); - /* we should now know the maximum packet size for an - * endpoint, so set the endpoints to a default value. */ + /* + * we should now know the maximum packet size for an + * endpoint, so set the endpoints to a default value. + */ if (ep0_mps) { int i; @@ -2069,8 +2128,10 @@ static void kill_all_requests(struct s3c_hsotg *hsotg, spin_lock_irqsave(&ep->lock, flags); list_for_each_entry_safe(req, treq, &ep->queue, queue) { - /* currently, we can't do much about an already - * running request on an in endpoint */ + /* + * currently, we can't do much about an already + * running request on an in endpoint + */ if (ep->req == req && ep->dir_in && !force) continue; @@ -2094,7 +2155,7 @@ static void kill_all_requests(struct s3c_hsotg *hsotg, * The device has been disconnected. Remove all current * transactions and signal the gadget driver that this * has happened. -*/ + */ static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg) { unsigned ep; @@ -2145,7 +2206,7 @@ static struct s3c_hsotg *our_hsotg; * @hsotg: The device state * * Issue a soft reset to the core, and await the core finishing it. -*/ + */ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) { int timeout; @@ -2188,6 +2249,12 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) return 0; } +/** + * s3c_hsotg_core_init - issue softreset to the core + * @hsotg: The device state + * + * Issue a soft reset to the core, and await the core finishing it. + */ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) { s3c_hsotg_corereset(hsotg); @@ -2406,9 +2473,11 @@ irq_retry: if (gintsts & S3C_GINTSTS_NPTxFEmp) { dev_dbg(hsotg->dev, "NPTxFEmp\n"); - /* Disable the interrupt to stop it happening again + /* + * Disable the interrupt to stop it happening again * unless one of these endpoint routines decides that - * it needs re-enabling */ + * it needs re-enabling + */ s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_NPTxFEmp); s3c_hsotg_irq_fifoempty(hsotg, false); @@ -2424,9 +2493,11 @@ irq_retry: } if (gintsts & S3C_GINTSTS_RxFLvl) { - /* note, since GINTSTS_RxFLvl doubles as FIFO-not-empty, + /* + * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty, * we need to retry s3c_hsotg_handle_rx if this is still - * set. */ + * set. + */ s3c_hsotg_handle_rx(hsotg); } @@ -2458,9 +2529,11 @@ irq_retry: s3c_hsotg_disconnect(hsotg); } - /* these next two seem to crop-up occasionally causing the core + /* + * these next two seem to crop-up occasionally causing the core * to shutdown the USB transfer, so try clearing them and logging - * the occurrence. */ + * the occurrence. + */ if (gintsts & S3C_GINTSTS_GOUTNakEff) { dev_info(hsotg->dev, "GOUTNakEff triggered\n"); @@ -2478,8 +2551,10 @@ irq_retry: s3c_hsotg_dump(hsotg); } - /* if we've had fifo events, we should try and go around the - * loop again to see if there's any point in returning yet. */ + /* + * if we've had fifo events, we should try and go around the + * loop again to see if there's any point in returning yet. + */ if (gintsts & IRQ_RETRY_MASK && --retry_count > 0) goto irq_retry; @@ -2493,7 +2568,7 @@ irq_retry: * @desc: The USB endpoint descriptor to configure with. * * This is called from the USB gadget code's usb_ep_enable(). -*/ + */ static int s3c_hsotg_ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc) { @@ -2536,11 +2611,14 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, epctrl &= ~(S3C_DxEPCTL_EPType_MASK | S3C_DxEPCTL_MPS_MASK); epctrl |= S3C_DxEPCTL_MPS(mps); - /* mark the endpoint as active, otherwise the core may ignore - * transactions entirely for this endpoint */ + /* + * mark the endpoint as active, otherwise the core may ignore + * transactions entirely for this endpoint + */ epctrl |= S3C_DxEPCTL_USBActEp; - /* set the NAK status on the endpoint, otherwise we might try and + /* + * set the NAK status on the endpoint, otherwise we might try and * do something with data that we've yet got a request to process * since the RXFIFO will take data for an endpoint even if the * size register hasn't been set. @@ -2566,10 +2644,12 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, case USB_ENDPOINT_XFER_INT: if (dir_in) { - /* Allocate our TxFNum by simply using the index + /* + * Allocate our TxFNum by simply using the index * of the endpoint for the moment. We could do * something better if the host indicates how - * many FIFOs we are expecting to use. */ + * many FIFOs we are expecting to use. + */ hs_ep->periodic = 1; epctrl |= S3C_DxEPCTL_TxFNum(index); @@ -2583,7 +2663,8 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, break; } - /* if the hardware has dedicated fifos, we must give each IN EP + /* + * if the hardware has dedicated fifos, we must give each IN EP * a unique tx-fifo even if it is non-periodic. */ if (dir_in && hsotg->dedicated_fifos) @@ -2608,6 +2689,10 @@ out: return ret; } +/** + * s3c_hsotg_ep_disable - disable given endpoint + * @ep: The endpoint to disable. + */ static int s3c_hsotg_ep_disable(struct usb_ep *ep) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); @@ -2651,7 +2736,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) * on_list - check request is on the given endpoint * @ep: The endpoint to check. * @test: The request to test if it is on the endpoint. -*/ + */ static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test) { struct s3c_hsotg_req *req, *treq; @@ -2664,6 +2749,11 @@ static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test) return false; } +/** + * s3c_hsotg_ep_dequeue - dequeue given endpoint + * @ep: The endpoint to dequeue. + * @req: The request to be removed from a queue. + */ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) { struct s3c_hsotg_req *hs_req = our_req(req); @@ -2686,6 +2776,11 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) return 0; } +/** + * s3c_hsotg_ep_sethalt - set halt on a given endpoint + * @ep: The endpoint to set halt. + * @value: Set or unset the halt. + */ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); @@ -2752,8 +2847,7 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = { /** * s3c_hsotg_phy_enable - enable platform phy dev - * - * @param: The driver state + * @hsotg: The driver state * * A wrapper for platform code responsible for controlling * low-level USB code @@ -2769,8 +2863,7 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg) /** * s3c_hsotg_phy_disable - disable platform phy dev - * - * @param: The driver state + * @hsotg: The driver state * * A wrapper for platform code responsible for controlling * low-level USB code @@ -2783,6 +2876,10 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg) hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); } +/** + * s3c_hsotg_init - initalize the usb core + * @hsotg: The driver state + */ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) { /* unmask subset of endpoint interrupts */ @@ -2822,6 +2919,14 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) hsotg->regs + S3C_GAHBCFG); } +/** + * s3c_hsotg_udc_start - prepare the udc for work + * @gadget: The usb gadget state + * @driver: The usb gadget driver + * + * Perform initialization to prepare udc device and driver + * to work. + */ static int s3c_hsotg_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { @@ -2874,6 +2979,13 @@ err: return ret; } +/** + * s3c_hsotg_udc_stop - stop the udc + * @gadget: The usb gadget state + * @driver: The usb gadget driver + * + * Stop udc hw block and stay tunned for future transmissions + */ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { @@ -2903,6 +3015,12 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, return 0; } +/** + * s3c_hsotg_gadget_getframe - read the frame number + * @gadget: The usb gadget state + * + * Read the {micro} frame number + */ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget) { return s3c_hsotg_read_frameno(to_hsotg(gadget)); @@ -2958,7 +3076,8 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT; hs_ep->ep.ops = &s3c_hsotg_ep_ops; - /* Read the FIFO size for the Periodic TX FIFO, even if we're + /* + * Read the FIFO size for the Periodic TX FIFO, even if we're * an OUT endpoint, we may as well do this if in future the * code is changed to make each endpoint's direction changeable. */ @@ -2966,7 +3085,8 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum)); hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4; - /* if we're using dma, we need to set the next-endpoint pointer + /* + * if we're using dma, we need to set the next-endpoint pointer * to be something valid. */ @@ -2998,9 +3118,12 @@ static void s3c_hsotg_hw_cfg(struct s3c_hsotg *hsotg) dev_info(hsotg->dev, "%s fifos\n", hsotg->dedicated_fifos ? "dedicated" : "shared"); - } +/** + * s3c_hsotg_dump - dump state of the udc + * @param: The device state + */ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) { #ifdef DEBUG @@ -3049,7 +3172,6 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) #endif } - /** * state_show - debugfs: show overall driver and device state. * @seq: The seq file to write to. @@ -3128,7 +3250,7 @@ static const struct file_operations state_fops = { * * Show the FIFO information for the overall fifo and all the * periodic transmission FIFOs. -*/ + */ static int fifo_show(struct seq_file *seq, void *v) { struct s3c_hsotg *hsotg = seq->private; @@ -3183,7 +3305,7 @@ static const char *decode_direction(int is_in) * * This debugfs entry shows the state of the given endpoint (one is * registered for each available). -*/ + */ static int ep_show(struct seq_file *seq, void *v) { struct s3c_hsotg_ep *ep = seq->private; @@ -3263,7 +3385,7 @@ static const struct file_operations ep_fops = { * about the state of the system. The directory name is created * with the same name as the device itself, in case we end up * with multiple blocks in future systems. -*/ + */ static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) { struct dentry *root; @@ -3309,7 +3431,7 @@ static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) * @hsotg: The driver state * * Cleanup (remove) the debugfs files for use on module exit. -*/ + */ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) { unsigned epidx; @@ -3324,6 +3446,10 @@ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) debugfs_remove(hsotg->debug_root); } +/** + * s3c_hsotg_probe - probe function for hsotg driver + * @pdev: The platform information for the driver + */ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) { struct s3c_hsotg_plat *plat = pdev->dev.platform_data; @@ -3525,6 +3651,10 @@ err_mem: return ret; } +/** + * s3c_hsotg_remove - remove function for hsotg driver + * @pdev: The platform information for the driver + */ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) { struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); -- cgit v0.10.2 From f99b2bfebe8984db2b6e4c07e2bedc91977d27d8 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:12 +0200 Subject: usb:hsotg:samsung: Remove our_hsotg global pointer The our_hsotg global pointer to hsotg USB device state is removed. It has been replaced with to_hsotg(gadget) function. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 710823b..cd7ae3a 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2194,8 +2194,6 @@ static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic) } } -static struct s3c_hsotg *our_hsotg; - /* IRQ flags which will trigger a retry around the IRQ loop */ #define IRQ_RETRY_MASK (S3C_GINTSTS_NPTxFEmp | \ S3C_GINTSTS_PTxFEmp | \ @@ -2930,7 +2928,7 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) static int s3c_hsotg_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { - struct s3c_hsotg *hsotg = our_hsotg; + struct s3c_hsotg *hsotg = to_hsotg(gadget); int ret; if (!hsotg) { @@ -2989,7 +2987,7 @@ err: static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { - struct s3c_hsotg *hsotg = our_hsotg; + struct s3c_hsotg *hsotg = to_hsotg(gadget); int ep; if (!hsotg) @@ -3624,7 +3622,6 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) s3c_hsotg_dump(hsotg); - our_hsotg = hsotg; return 0; err_ep_mem: -- cgit v0.10.2 From f026a52d4309e1e08752a8bd41ac74aeea815686 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:13 +0200 Subject: usb:hsotg:samsung: Add release function for hsotg device Add release function to prevent kernel warning. Kfree is performed when all references are gone. Signed-off-by: Sangwook Lee Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index cd7ae3a..520dc3d 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -3445,9 +3445,21 @@ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) } /** + * s3c_hsotg_release - release callback for hsotg device + * @dev: Device to for which release is called + */ +static void s3c_hsotg_release(struct device *dev) +{ + struct s3c_hsotg *hsotg = dev_get_drvdata(dev); + + kfree(hsotg); +} + +/** * s3c_hsotg_probe - probe function for hsotg driver * @pdev: The platform information for the driver */ + static int __devinit s3c_hsotg_probe(struct platform_device *pdev) { struct s3c_hsotg_plat *plat = pdev->dev.platform_data; @@ -3531,6 +3543,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) hsotg->gadget.dev.parent = dev; hsotg->gadget.dev.dma_mask = dev->dma_mask; + hsotg->gadget.dev.release = s3c_hsotg_release; /* reset the system */ @@ -3678,7 +3691,6 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) clk_put(hsotg->clk); device_unregister(&hsotg->gadget.dev); - kfree(hsotg); return 0; } -- cgit v0.10.2 From 94cb8fd637d7ec4a6685365c3287050969389cbe Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:14 +0200 Subject: usb:hsotg:samsung: Remove the S3C_ prefix from registers definition. This code removes the S3C_ prefix from s3c-hsotg driver. This change provides more architecture independent code. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 520dc3d..34599df 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -256,14 +256,14 @@ static inline bool using_dma(struct s3c_hsotg *hsotg) */ static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints) { - u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK); + u32 gsintmsk = readl(hsotg->regs + GINTMSK); u32 new_gsintmsk; new_gsintmsk = gsintmsk | ints; if (new_gsintmsk != gsintmsk) { dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk); - writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK); + writel(new_gsintmsk, hsotg->regs + GINTMSK); } } @@ -274,13 +274,13 @@ static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints) */ static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints) { - u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK); + u32 gsintmsk = readl(hsotg->regs + GINTMSK); u32 new_gsintmsk; new_gsintmsk = gsintmsk & ~ints; if (new_gsintmsk != gsintmsk) - writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK); + writel(new_gsintmsk, hsotg->regs + GINTMSK); } /** @@ -305,12 +305,12 @@ static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg, bit <<= 16; local_irq_save(flags); - daint = readl(hsotg->regs + S3C_DAINTMSK); + daint = readl(hsotg->regs + DAINTMSK); if (en) daint |= bit; else daint &= ~bit; - writel(daint, hsotg->regs + S3C_DAINTMSK); + writel(daint, hsotg->regs + DAINTMSK); local_irq_restore(flags); } @@ -328,10 +328,10 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) /* set FIFO sizes to 2048/1024 */ - writel(2048, hsotg->regs + S3C_GRXFSIZ); - writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) | - S3C_GNPTXFSIZ_NPTxFDep(1024), - hsotg->regs + S3C_GNPTXFSIZ); + writel(2048, hsotg->regs + GRXFSIZ); + writel(GNPTXFSIZ_NPTxFStAddr(2048) | + GNPTXFSIZ_NPTxFDep(1024), + hsotg->regs + GNPTXFSIZ); /* * arange all the rest of the TX FIFOs, as some versions of this @@ -351,10 +351,10 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) for (ep = 1; ep <= 15; ep++) { val = addr; - val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT; + val |= size << DPTXFSIZn_DPTxFSize_SHIFT; addr += size; - writel(val, hsotg->regs + S3C_DPTXFSIZn(ep)); + writel(val, hsotg->regs + DPTXFSIZn(ep)); } /* @@ -362,15 +362,15 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) * all fifos are flushed before continuing */ - writel(S3C_GRSTCTL_TxFNum(0x10) | S3C_GRSTCTL_TxFFlsh | - S3C_GRSTCTL_RxFFlsh, hsotg->regs + S3C_GRSTCTL); + writel(GRSTCTL_TxFNum(0x10) | GRSTCTL_TxFFlsh | + GRSTCTL_RxFFlsh, hsotg->regs + GRSTCTL); /* wait until the fifos are both flushed */ timeout = 100; while (1) { - val = readl(hsotg->regs + S3C_GRSTCTL); + val = readl(hsotg->regs + GRSTCTL); - if ((val & (S3C_GRSTCTL_TxFFlsh | S3C_GRSTCTL_RxFFlsh)) == 0) + if ((val & (GRSTCTL_TxFFlsh | GRSTCTL_RxFFlsh)) == 0) break; if (--timeout == 0) { @@ -473,7 +473,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, struct s3c_hsotg_req *hs_req) { bool periodic = is_ep_periodic(hs_ep); - u32 gnptxsts = readl(hsotg->regs + S3C_GNPTXSTS); + u32 gnptxsts = readl(hsotg->regs + GNPTXSTS); int buf_pos = hs_req->req.actual; int to_write = hs_ep->size_loaded; void *data; @@ -487,7 +487,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, return 0; if (periodic && !hsotg->dedicated_fifos) { - u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index)); + u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); int size_left; int size_done; @@ -496,14 +496,14 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, * how much data is left in the fifo. */ - size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); + size_left = DxEPTSIZ_XferSize_GET(epsize); /* * if shared fifo, we cannot write anything until the * previous data has been completely sent. */ if (hs_ep->fifo_load != 0) { - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp); + s3c_hsotg_en_gsint(hsotg, GINTSTS_PTxFEmp); return -ENOSPC; } @@ -524,25 +524,25 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, __func__, can_write); if (can_write <= 0) { - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp); + s3c_hsotg_en_gsint(hsotg, GINTSTS_PTxFEmp); return -ENOSPC; } } else if (hsotg->dedicated_fifos && hs_ep->index != 0) { - can_write = readl(hsotg->regs + S3C_DTXFSTS(hs_ep->index)); + can_write = readl(hsotg->regs + DTXFSTS(hs_ep->index)); can_write &= 0xffff; can_write *= 4; } else { - if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) { + if (GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) { dev_dbg(hsotg->dev, "%s: no queue slots available (0x%08x)\n", __func__, gnptxsts); - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_NPTxFEmp); + s3c_hsotg_en_gsint(hsotg, GINTSTS_NPTxFEmp); return -ENOSPC; } - can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts); + can_write = GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts); can_write *= 4; /* fifo size is in 32bit quantities. */ } @@ -566,8 +566,8 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, to_write = hs_ep->ep.maxpacket; s3c_hsotg_en_gsint(hsotg, - periodic ? S3C_GINTSTS_PTxFEmp : - S3C_GINTSTS_NPTxFEmp); + periodic ? GINTSTS_PTxFEmp : + GINTSTS_NPTxFEmp); } /* see if we can write data */ @@ -593,8 +593,8 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, */ s3c_hsotg_en_gsint(hsotg, - periodic ? S3C_GINTSTS_PTxFEmp : - S3C_GINTSTS_NPTxFEmp); + periodic ? GINTSTS_PTxFEmp : + GINTSTS_NPTxFEmp); } dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n", @@ -612,7 +612,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, to_write = DIV_ROUND_UP(to_write, 4); data = hs_req->req.buf + buf_pos; - writesl(hsotg->regs + S3C_EPFIFO(hs_ep->index), data, to_write); + writesl(hsotg->regs + EPFIFO(hs_ep->index), data, to_write); return (to_write >= can_write) ? -ENOSPC : 0; } @@ -631,12 +631,12 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep) unsigned maxpkt; if (index != 0) { - maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1; - maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1; + maxsize = DxEPTSIZ_XferSize_LIMIT + 1; + maxpkt = DxEPTSIZ_PktCnt_LIMIT + 1; } else { maxsize = 64+64; if (hs_ep->dir_in) - maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1; + maxpkt = DIEPTSIZ0_PktCnt_LIMIT + 1; else maxpkt = 2; } @@ -695,8 +695,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, } } - epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index); - epsize_reg = dir_in ? S3C_DIEPTSIZ(index) : S3C_DOEPTSIZ(index); + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); + epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index); dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n", __func__, readl(hsotg->regs + epctrl_reg), index, @@ -705,7 +705,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, /* If endpoint is stalled, we will restart request later */ ctrl = readl(hsotg->regs + epctrl_reg); - if (ctrl & S3C_DxEPCTL_Stall) { + if (ctrl & DxEPCTL_Stall) { dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index); return; } @@ -739,7 +739,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, packets = 1; /* send one packet if length is zero. */ if (dir_in && index != 0) - epsize = S3C_DxEPTSIZ_MC(1); + epsize = DxEPTSIZ_MC(1); else epsize = 0; @@ -753,8 +753,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, packets++; } - epsize |= S3C_DxEPTSIZ_PktCnt(packets); - epsize |= S3C_DxEPTSIZ_XferSize(length); + epsize |= DxEPTSIZ_PktCnt(packets); + epsize |= DxEPTSIZ_XferSize(length); dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n", __func__, packets, length, ureq->length, epsize, epsize_reg); @@ -773,15 +773,15 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, * synced by s3c_hsotg_ep_queue(). */ - dma_reg = dir_in ? S3C_DIEPDMA(index) : S3C_DOEPDMA(index); + dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index); writel(ureq->dma, hsotg->regs + dma_reg); dev_dbg(hsotg->dev, "%s: 0x%08x => 0x%08x\n", __func__, ureq->dma, dma_reg); } - ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */ - ctrl |= S3C_DxEPCTL_USBActEp; + ctrl |= DxEPCTL_EPEna; /* ensure ep enabled */ + ctrl |= DxEPCTL_USBActEp; dev_dbg(hsotg->dev, "setup req:%d\n", hsotg->setup); @@ -789,7 +789,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, if (hsotg->setup && index == 0) hsotg->setup = 0; else - ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */ + ctrl |= DxEPCTL_CNAK; /* clear NAK set by core */ dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); @@ -815,8 +815,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, * to debugging to see what is going on. */ if (dir_in) - writel(S3C_DIEPMSK_INTknTXFEmpMsk, - hsotg->regs + S3C_DIEPINT(index)); + writel(DIEPMSK_INTknTXFEmpMsk, + hsotg->regs + DIEPINT(index)); /* * Note, trying to clear the NAK here causes problems with transmit @@ -824,7 +824,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, */ /* check ep is enabled */ - if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna)) + if (!(readl(hsotg->regs + epctrl_reg) & DxEPCTL_EPEna)) dev_warn(hsotg->dev, "ep%d: failed to become enabled (DxEPCTL=0x%08x)?\n", index, readl(hsotg->regs + epctrl_reg)); @@ -1209,10 +1209,10 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { switch (ctrl->bRequest) { case USB_REQ_SET_ADDRESS: - dcfg = readl(hsotg->regs + S3C_DCFG); - dcfg &= ~S3C_DCFG_DevAddr_MASK; - dcfg |= ctrl->wValue << S3C_DCFG_DevAddr_SHIFT; - writel(dcfg, hsotg->regs + S3C_DCFG); + dcfg = readl(hsotg->regs + DCFG); + dcfg &= ~DCFG_DevAddr_MASK; + dcfg |= ctrl->wValue << DCFG_DevAddr_SHIFT; + writel(dcfg, hsotg->regs + DCFG); dev_info(hsotg->dev, "new address %d\n", ctrl->wValue); @@ -1248,16 +1248,16 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, u32 ctrl; dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in); - reg = (ep0->dir_in) ? S3C_DIEPCTL0 : S3C_DOEPCTL0; + reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0; /* - * S3C_DxEPCTL_Stall will be cleared by EP once it has + * DxEPCTL_Stall will be cleared by EP once it has * taken effect, so no need to clear later. */ ctrl = readl(hsotg->regs + reg); - ctrl |= S3C_DxEPCTL_Stall; - ctrl |= S3C_DxEPCTL_CNAK; + ctrl |= DxEPCTL_Stall; + ctrl |= DxEPCTL_CNAK; writel(ctrl, hsotg->regs + reg); dev_dbg(hsotg->dev, @@ -1439,13 +1439,13 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) { struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep_idx]; struct s3c_hsotg_req *hs_req = hs_ep->req; - void __iomem *fifo = hsotg->regs + S3C_EPFIFO(ep_idx); + void __iomem *fifo = hsotg->regs + EPFIFO(ep_idx); int to_read; int max_req; int read_ptr; if (!hs_req) { - u32 epctl = readl(hsotg->regs + S3C_DOEPCTL(ep_idx)); + u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx)); int ptr; dev_warn(hsotg->dev, @@ -1525,14 +1525,14 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "sending zero-length packet\n"); /* issue a zero-sized packet to terminate this */ - writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) | - S3C_DxEPTSIZ_XferSize(0), hsotg->regs + S3C_DIEPTSIZ(0)); + writel(DxEPTSIZ_MC(1) | DxEPTSIZ_PktCnt(1) | + DxEPTSIZ_XferSize(0), hsotg->regs + DIEPTSIZ(0)); - ctrl = readl(hsotg->regs + S3C_DIEPCTL0); - ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */ - ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */ - ctrl |= S3C_DxEPCTL_USBActEp; - writel(ctrl, hsotg->regs + S3C_DIEPCTL0); + ctrl = readl(hsotg->regs + DIEPCTL0); + ctrl |= DxEPCTL_CNAK; /* clear NAK set by core */ + ctrl |= DxEPCTL_EPEna; /* ensure ep enabled */ + ctrl |= DxEPCTL_USBActEp; + writel(ctrl, hsotg->regs + DIEPCTL0); } /** @@ -1548,11 +1548,11 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, int epnum, bool was_setup) { - u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum)); + u32 epsize = readl(hsotg->regs + DOEPTSIZ(epnum)); struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum]; struct s3c_hsotg_req *hs_req = hs_ep->req; struct usb_request *req = &hs_req->req; - unsigned size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); + unsigned size_left = DxEPTSIZ_XferSize_GET(epsize); int result = 0; if (!hs_req) { @@ -1622,9 +1622,9 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg) { u32 dsts; - dsts = readl(hsotg->regs + S3C_DSTS); - dsts &= S3C_DSTS_SOFFN_MASK; - dsts >>= S3C_DSTS_SOFFN_SHIFT; + dsts = readl(hsotg->regs + DSTS); + dsts &= DSTS_SOFFN_MASK; + dsts >>= DSTS_SOFFN_SHIFT; return dsts; } @@ -1647,29 +1647,29 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg) */ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) { - u32 grxstsr = readl(hsotg->regs + S3C_GRXSTSP); + u32 grxstsr = readl(hsotg->regs + GRXSTSP); u32 epnum, status, size; WARN_ON(using_dma(hsotg)); - epnum = grxstsr & S3C_GRXSTS_EPNum_MASK; - status = grxstsr & S3C_GRXSTS_PktSts_MASK; + epnum = grxstsr & GRXSTS_EPNum_MASK; + status = grxstsr & GRXSTS_PktSts_MASK; - size = grxstsr & S3C_GRXSTS_ByteCnt_MASK; - size >>= S3C_GRXSTS_ByteCnt_SHIFT; + size = grxstsr & GRXSTS_ByteCnt_MASK; + size >>= GRXSTS_ByteCnt_SHIFT; if (1) dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n", __func__, grxstsr, size, epnum); -#define __status(x) ((x) >> S3C_GRXSTS_PktSts_SHIFT) +#define __status(x) ((x) >> GRXSTS_PktSts_SHIFT) - switch (status >> S3C_GRXSTS_PktSts_SHIFT) { - case __status(S3C_GRXSTS_PktSts_GlobalOutNAK): + switch (status >> GRXSTS_PktSts_SHIFT) { + case __status(GRXSTS_PktSts_GlobalOutNAK): dev_dbg(hsotg->dev, "GlobalOutNAK\n"); break; - case __status(S3C_GRXSTS_PktSts_OutDone): + case __status(GRXSTS_PktSts_OutDone): dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n", s3c_hsotg_read_frameno(hsotg)); @@ -1677,24 +1677,24 @@ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) s3c_hsotg_handle_outdone(hsotg, epnum, false); break; - case __status(S3C_GRXSTS_PktSts_SetupDone): + case __status(GRXSTS_PktSts_SetupDone): dev_dbg(hsotg->dev, "SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n", s3c_hsotg_read_frameno(hsotg), - readl(hsotg->regs + S3C_DOEPCTL(0))); + readl(hsotg->regs + DOEPCTL(0))); s3c_hsotg_handle_outdone(hsotg, epnum, true); break; - case __status(S3C_GRXSTS_PktSts_OutRX): + case __status(GRXSTS_PktSts_OutRX): s3c_hsotg_rx_data(hsotg, epnum, size); break; - case __status(S3C_GRXSTS_PktSts_SetupRX): + case __status(GRXSTS_PktSts_SetupRX): dev_dbg(hsotg->dev, "SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n", s3c_hsotg_read_frameno(hsotg), - readl(hsotg->regs + S3C_DOEPCTL(0))); + readl(hsotg->regs + DOEPCTL(0))); s3c_hsotg_rx_data(hsotg, epnum, size); break; @@ -1716,13 +1716,13 @@ static u32 s3c_hsotg_ep0_mps(unsigned int mps) { switch (mps) { case 64: - return S3C_D0EPCTL_MPS_64; + return D0EPCTL_MPS_64; case 32: - return S3C_D0EPCTL_MPS_32; + return D0EPCTL_MPS_32; case 16: - return S3C_D0EPCTL_MPS_16; + return D0EPCTL_MPS_16; case 8: - return S3C_D0EPCTL_MPS_8; + return D0EPCTL_MPS_8; } /* bad max packet size, warn and return invalid result */ @@ -1753,7 +1753,7 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, if (mpsval > 3) goto bad_mps; } else { - if (mps >= S3C_DxEPCTL_MPS_LIMIT+1) + if (mps >= DxEPCTL_MPS_LIMIT+1) goto bad_mps; mpsval = mps; @@ -1766,16 +1766,16 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, * if one of the directions may not be in use. */ - reg = readl(regs + S3C_DIEPCTL(ep)); - reg &= ~S3C_DxEPCTL_MPS_MASK; + reg = readl(regs + DIEPCTL(ep)); + reg &= ~DxEPCTL_MPS_MASK; reg |= mpsval; - writel(reg, regs + S3C_DIEPCTL(ep)); + writel(reg, regs + DIEPCTL(ep)); if (ep) { - reg = readl(regs + S3C_DOEPCTL(ep)); - reg &= ~S3C_DxEPCTL_MPS_MASK; + reg = readl(regs + DOEPCTL(ep)); + reg &= ~DxEPCTL_MPS_MASK; reg |= mpsval; - writel(reg, regs + S3C_DOEPCTL(ep)); + writel(reg, regs + DOEPCTL(ep)); } return; @@ -1794,16 +1794,16 @@ static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx) int timeout; int val; - writel(S3C_GRSTCTL_TxFNum(idx) | S3C_GRSTCTL_TxFFlsh, - hsotg->regs + S3C_GRSTCTL); + writel(GRSTCTL_TxFNum(idx) | GRSTCTL_TxFFlsh, + hsotg->regs + GRSTCTL); /* wait until the fifo is flushed */ timeout = 100; while (1) { - val = readl(hsotg->regs + S3C_GRSTCTL); + val = readl(hsotg->regs + GRSTCTL); - if ((val & (S3C_GRSTCTL_TxFFlsh)) == 0) + if ((val & (GRSTCTL_TxFFlsh)) == 0) break; if (--timeout == 0) { @@ -1853,7 +1853,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep) { struct s3c_hsotg_req *hs_req = hs_ep->req; - u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index)); + u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); int size_left, size_done; if (!hs_req) { @@ -1878,7 +1878,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, * aligned). */ - size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); + size_left = DxEPTSIZ_XferSize_GET(epsize); size_done = hs_ep->size_loaded - size_left; size_done += hs_ep->last_load; @@ -1930,9 +1930,9 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, int dir_in) { struct s3c_hsotg_ep *hs_ep = &hsotg->eps[idx]; - u32 epint_reg = dir_in ? S3C_DIEPINT(idx) : S3C_DOEPINT(idx); - u32 epctl_reg = dir_in ? S3C_DIEPCTL(idx) : S3C_DOEPCTL(idx); - u32 epsiz_reg = dir_in ? S3C_DIEPTSIZ(idx) : S3C_DOEPTSIZ(idx); + u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx); + u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx); + u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx); u32 ints; ints = readl(hsotg->regs + epint_reg); @@ -1943,7 +1943,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n", __func__, idx, dir_in ? "in" : "out", ints); - if (ints & S3C_DxEPINT_XferCompl) { + if (ints & DxEPINT_XferCompl) { dev_dbg(hsotg->dev, "%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n", __func__, readl(hsotg->regs + epctl_reg), @@ -1968,7 +1968,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, } } - if (ints & S3C_DxEPINT_EPDisbld) { + if (ints & DxEPINT_EPDisbld) { dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__); if (dir_in) { @@ -1976,20 +1976,20 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, s3c_hsotg_txfifo_flush(hsotg, idx); - if ((epctl & S3C_DxEPCTL_Stall) && - (epctl & S3C_DxEPCTL_EPType_Bulk)) { - int dctl = readl(hsotg->regs + S3C_DCTL); + if ((epctl & DxEPCTL_Stall) && + (epctl & DxEPCTL_EPType_Bulk)) { + int dctl = readl(hsotg->regs + DCTL); - dctl |= S3C_DCTL_CGNPInNAK; - writel(dctl, hsotg->regs + S3C_DCTL); + dctl |= DCTL_CGNPInNAK; + writel(dctl, hsotg->regs + DCTL); } } } - if (ints & S3C_DxEPINT_AHBErr) + if (ints & DxEPINT_AHBErr) dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__); - if (ints & S3C_DxEPINT_Setup) { /* Setup or Timeout */ + if (ints & DxEPINT_Setup) { /* Setup or Timeout */ dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__); if (using_dma(hsotg) && idx == 0) { @@ -2007,25 +2007,25 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, } } - if (ints & S3C_DxEPINT_Back2BackSetup) + if (ints & DxEPINT_Back2BackSetup) dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__); if (dir_in) { /* not sure if this is important, but we'll clear it anyway */ - if (ints & S3C_DIEPMSK_INTknTXFEmpMsk) { + if (ints & DIEPMSK_INTknTXFEmpMsk) { dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n", __func__, idx); } /* this probably means something bad is happening */ - if (ints & S3C_DIEPMSK_INTknEPMisMsk) { + if (ints & DIEPMSK_INTknEPMisMsk) { dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n", __func__, idx); } /* FIFO has space or is empty (see GAHBCFG) */ if (hsotg->dedicated_fifos && - ints & S3C_DIEPMSK_TxFIFOEmpty) { + ints & DIEPMSK_TxFIFOEmpty) { dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n", __func__, idx); if (!using_dma(hsotg)) @@ -2043,7 +2043,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, */ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) { - u32 dsts = readl(hsotg->regs + S3C_DSTS); + u32 dsts = readl(hsotg->regs + DSTS); int ep0_mps = 0, ep_mps; /* @@ -2061,21 +2061,21 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) */ /* catch both EnumSpd_FS and EnumSpd_FS48 */ - switch (dsts & S3C_DSTS_EnumSpd_MASK) { - case S3C_DSTS_EnumSpd_FS: - case S3C_DSTS_EnumSpd_FS48: + switch (dsts & DSTS_EnumSpd_MASK) { + case DSTS_EnumSpd_FS: + case DSTS_EnumSpd_FS48: hsotg->gadget.speed = USB_SPEED_FULL; ep0_mps = EP0_MPS_LIMIT; ep_mps = 64; break; - case S3C_DSTS_EnumSpd_HS: + case DSTS_EnumSpd_HS: hsotg->gadget.speed = USB_SPEED_HIGH; ep0_mps = EP0_MPS_LIMIT; ep_mps = 512; break; - case S3C_DSTS_EnumSpd_LS: + case DSTS_EnumSpd_LS: hsotg->gadget.speed = USB_SPEED_LOW; /* * note, we don't actually support LS in this driver at the @@ -2104,8 +2104,8 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) s3c_hsotg_enqueue_setup(hsotg); dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); + readl(hsotg->regs + DIEPCTL0), + readl(hsotg->regs + DOEPCTL0)); } /** @@ -2195,9 +2195,9 @@ static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic) } /* IRQ flags which will trigger a retry around the IRQ loop */ -#define IRQ_RETRY_MASK (S3C_GINTSTS_NPTxFEmp | \ - S3C_GINTSTS_PTxFEmp | \ - S3C_GINTSTS_RxFLvl) +#define IRQ_RETRY_MASK (GINTSTS_NPTxFEmp | \ + GINTSTS_PTxFEmp | \ + GINTSTS_RxFLvl) /** * s3c_hsotg_corereset - issue softreset to the core @@ -2213,14 +2213,14 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) dev_dbg(hsotg->dev, "resetting core\n"); /* issue soft reset */ - writel(S3C_GRSTCTL_CSftRst, hsotg->regs + S3C_GRSTCTL); + writel(GRSTCTL_CSftRst, hsotg->regs + GRSTCTL); timeout = 1000; do { - grstctl = readl(hsotg->regs + S3C_GRSTCTL); - } while ((grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0); + grstctl = readl(hsotg->regs + GRSTCTL); + } while ((grstctl & GRSTCTL_CSftRst) && timeout-- > 0); - if (grstctl & S3C_GRSTCTL_CSftRst) { + if (grstctl & GRSTCTL_CSftRst) { dev_err(hsotg->dev, "Failed to get CSftRst asserted\n"); return -EINVAL; } @@ -2228,7 +2228,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) timeout = 1000; while (1) { - u32 grstctl = readl(hsotg->regs + S3C_GRSTCTL); + u32 grstctl = readl(hsotg->regs + GRSTCTL); if (timeout-- < 0) { dev_info(hsotg->dev, @@ -2237,7 +2237,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) return -ETIMEDOUT; } - if (!(grstctl & S3C_GRSTCTL_AHBIdle)) + if (!(grstctl & GRSTCTL_AHBIdle)) continue; break; /* reset done */ @@ -2263,34 +2263,34 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) */ /* set the PLL on, remove the HNP/SRP and set the PHY */ - writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | - (0x5 << 10), hsotg->regs + S3C_GUSBCFG); + writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) | + (0x5 << 10), hsotg->regs + GUSBCFG); s3c_hsotg_init_fifo(hsotg); - __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); + __orr32(hsotg->regs + DCTL, DCTL_SftDiscon); - writel(1 << 18 | S3C_DCFG_DevSpd_HS, hsotg->regs + S3C_DCFG); + writel(1 << 18 | DCFG_DevSpd_HS, hsotg->regs + DCFG); /* Clear any pending OTG interrupts */ - writel(0xffffffff, hsotg->regs + S3C_GOTGINT); + writel(0xffffffff, hsotg->regs + GOTGINT); /* Clear any pending interrupts */ - writel(0xffffffff, hsotg->regs + S3C_GINTSTS); + writel(0xffffffff, hsotg->regs + GINTSTS); - writel(S3C_GINTSTS_ErlySusp | S3C_GINTSTS_SessReqInt | - S3C_GINTSTS_GOUTNakEff | S3C_GINTSTS_GINNakEff | - S3C_GINTSTS_ConIDStsChng | S3C_GINTSTS_USBRst | - S3C_GINTSTS_EnumDone | S3C_GINTSTS_OTGInt | - S3C_GINTSTS_USBSusp | S3C_GINTSTS_WkUpInt, - hsotg->regs + S3C_GINTMSK); + writel(GINTSTS_ErlySusp | GINTSTS_SessReqInt | + GINTSTS_GOUTNakEff | GINTSTS_GINNakEff | + GINTSTS_ConIDStsChng | GINTSTS_USBRst | + GINTSTS_EnumDone | GINTSTS_OTGInt | + GINTSTS_USBSusp | GINTSTS_WkUpInt, + hsotg->regs + GINTMSK); if (using_dma(hsotg)) - writel(S3C_GAHBCFG_GlblIntrEn | S3C_GAHBCFG_DMAEn | - S3C_GAHBCFG_HBstLen_Incr4, - hsotg->regs + S3C_GAHBCFG); + writel(GAHBCFG_GlblIntrEn | GAHBCFG_DMAEn | + GAHBCFG_HBstLen_Incr4, + hsotg->regs + GAHBCFG); else - writel(S3C_GAHBCFG_GlblIntrEn, hsotg->regs + S3C_GAHBCFG); + writel(GAHBCFG_GlblIntrEn, hsotg->regs + GAHBCFG); /* * Enabling INTknTXFEmpMsk here seems to be a big mistake, we end @@ -2298,30 +2298,30 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) * endpoint to try and read data. */ - writel(((hsotg->dedicated_fifos) ? S3C_DIEPMSK_TxFIFOEmpty : 0) | - S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk | - S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | - S3C_DIEPMSK_INTknEPMisMsk, - hsotg->regs + S3C_DIEPMSK); + writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty : 0) | + DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk | + DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk | + DIEPMSK_INTknEPMisMsk, + hsotg->regs + DIEPMSK); /* * don't need XferCompl, we get that from RXFIFO in slave mode. In * DMA mode we may need this. */ - writel((using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk | - S3C_DIEPMSK_TimeOUTMsk) : 0) | - S3C_DOEPMSK_EPDisbldMsk | S3C_DOEPMSK_AHBErrMsk | - S3C_DOEPMSK_SetupMsk, - hsotg->regs + S3C_DOEPMSK); + writel((using_dma(hsotg) ? (DIEPMSK_XferComplMsk | + DIEPMSK_TimeOUTMsk) : 0) | + DOEPMSK_EPDisbldMsk | DOEPMSK_AHBErrMsk | + DOEPMSK_SetupMsk, + hsotg->regs + DOEPMSK); - writel(0, hsotg->regs + S3C_DAINTMSK); + writel(0, hsotg->regs + DAINTMSK); dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); + readl(hsotg->regs + DIEPCTL0), + readl(hsotg->regs + DOEPCTL0)); /* enable in and out endpoint interrupts */ - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt); + s3c_hsotg_en_gsint(hsotg, GINTSTS_OEPInt | GINTSTS_IEPInt); /* * Enable the RXFIFO when in slave mode, as this is how we collect @@ -2329,51 +2329,51 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) * things we cannot process, so do not use it. */ if (!using_dma(hsotg)) - s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_RxFLvl); + s3c_hsotg_en_gsint(hsotg, GINTSTS_RxFLvl); /* Enable interrupts for EP0 in and out */ s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1); s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1); - __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone); + __orr32(hsotg->regs + DCTL, DCTL_PWROnPrgDone); udelay(10); /* see openiboot */ - __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone); + __bic32(hsotg->regs + DCTL, DCTL_PWROnPrgDone); - dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL)); + dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + DCTL)); /* - * S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by + * DxEPCTL_USBActEp says RO in manual, but seems to be set by * writing to the EPCTL register.. */ /* set to read 1 8byte packet */ - writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) | - S3C_DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0); + writel(DxEPTSIZ_MC(1) | DxEPTSIZ_PktCnt(1) | + DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0); writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | - S3C_DxEPCTL_CNAK | S3C_DxEPCTL_EPEna | - S3C_DxEPCTL_USBActEp, - hsotg->regs + S3C_DOEPCTL0); + DxEPCTL_CNAK | DxEPCTL_EPEna | + DxEPCTL_USBActEp, + hsotg->regs + DOEPCTL0); /* enable, but don't activate EP0in */ writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | - S3C_DxEPCTL_USBActEp, hsotg->regs + S3C_DIEPCTL0); + DxEPCTL_USBActEp, hsotg->regs + DIEPCTL0); s3c_hsotg_enqueue_setup(hsotg); dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); + readl(hsotg->regs + DIEPCTL0), + readl(hsotg->regs + DOEPCTL0)); /* clear global NAKs */ - writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK, - hsotg->regs + S3C_DCTL); + writel(DCTL_CGOUTNak | DCTL_CGNPInNAK, + hsotg->regs + DCTL); /* must be at-least 3ms to allow bus to see disconnect */ mdelay(3); /* remove the soft-disconnect and let's go */ - __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); + __bic32(hsotg->regs + DCTL, DCTL_SftDiscon); } /** @@ -2389,45 +2389,45 @@ static irqreturn_t s3c_hsotg_irq(int irq, void *pw) u32 gintmsk; irq_retry: - gintsts = readl(hsotg->regs + S3C_GINTSTS); - gintmsk = readl(hsotg->regs + S3C_GINTMSK); + gintsts = readl(hsotg->regs + GINTSTS); + gintmsk = readl(hsotg->regs + GINTMSK); dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n", __func__, gintsts, gintsts & gintmsk, gintmsk, retry_count); gintsts &= gintmsk; - if (gintsts & S3C_GINTSTS_OTGInt) { - u32 otgint = readl(hsotg->regs + S3C_GOTGINT); + if (gintsts & GINTSTS_OTGInt) { + u32 otgint = readl(hsotg->regs + GOTGINT); dev_info(hsotg->dev, "OTGInt: %08x\n", otgint); - writel(otgint, hsotg->regs + S3C_GOTGINT); + writel(otgint, hsotg->regs + GOTGINT); } - if (gintsts & S3C_GINTSTS_SessReqInt) { + if (gintsts & GINTSTS_SessReqInt) { dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__); - writel(S3C_GINTSTS_SessReqInt, hsotg->regs + S3C_GINTSTS); + writel(GINTSTS_SessReqInt, hsotg->regs + GINTSTS); } - if (gintsts & S3C_GINTSTS_EnumDone) { - writel(S3C_GINTSTS_EnumDone, hsotg->regs + S3C_GINTSTS); + if (gintsts & GINTSTS_EnumDone) { + writel(GINTSTS_EnumDone, hsotg->regs + GINTSTS); s3c_hsotg_irq_enumdone(hsotg); } - if (gintsts & S3C_GINTSTS_ConIDStsChng) { + if (gintsts & GINTSTS_ConIDStsChng) { dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n", - readl(hsotg->regs + S3C_DSTS), - readl(hsotg->regs + S3C_GOTGCTL)); + readl(hsotg->regs + DSTS), + readl(hsotg->regs + GOTGCTL)); - writel(S3C_GINTSTS_ConIDStsChng, hsotg->regs + S3C_GINTSTS); + writel(GINTSTS_ConIDStsChng, hsotg->regs + GINTSTS); } - if (gintsts & (S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt)) { - u32 daint = readl(hsotg->regs + S3C_DAINT); - u32 daint_out = daint >> S3C_DAINT_OutEP_SHIFT; - u32 daint_in = daint & ~(daint_out << S3C_DAINT_OutEP_SHIFT); + if (gintsts & (GINTSTS_OEPInt | GINTSTS_IEPInt)) { + u32 daint = readl(hsotg->regs + DAINT); + u32 daint_out = daint >> DAINT_OutEP_SHIFT; + u32 daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT); int ep; dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint); @@ -2443,17 +2443,17 @@ irq_retry: } } - if (gintsts & S3C_GINTSTS_USBRst) { + if (gintsts & GINTSTS_USBRst) { - u32 usb_status = readl(hsotg->regs + S3C_GOTGCTL); + u32 usb_status = readl(hsotg->regs + GOTGCTL); dev_info(hsotg->dev, "%s: USBRst\n", __func__); dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n", - readl(hsotg->regs + S3C_GNPTXSTS)); + readl(hsotg->regs + GNPTXSTS)); - writel(S3C_GINTSTS_USBRst, hsotg->regs + S3C_GINTSTS); + writel(GINTSTS_USBRst, hsotg->regs + GINTSTS); - if (usb_status & S3C_GOTGCTL_BSESVLD) { + if (usb_status & GOTGCTL_BSESVLD) { if (time_after(jiffies, hsotg->last_rst + msecs_to_jiffies(200))) { @@ -2468,7 +2468,7 @@ irq_retry: /* check both FIFOs */ - if (gintsts & S3C_GINTSTS_NPTxFEmp) { + if (gintsts & GINTSTS_NPTxFEmp) { dev_dbg(hsotg->dev, "NPTxFEmp\n"); /* @@ -2477,20 +2477,20 @@ irq_retry: * it needs re-enabling */ - s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_NPTxFEmp); + s3c_hsotg_disable_gsint(hsotg, GINTSTS_NPTxFEmp); s3c_hsotg_irq_fifoempty(hsotg, false); } - if (gintsts & S3C_GINTSTS_PTxFEmp) { + if (gintsts & GINTSTS_PTxFEmp) { dev_dbg(hsotg->dev, "PTxFEmp\n"); - /* See note in S3C_GINTSTS_NPTxFEmp */ + /* See note in GINTSTS_NPTxFEmp */ - s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_PTxFEmp); + s3c_hsotg_disable_gsint(hsotg, GINTSTS_PTxFEmp); s3c_hsotg_irq_fifoempty(hsotg, true); } - if (gintsts & S3C_GINTSTS_RxFLvl) { + if (gintsts & GINTSTS_RxFLvl) { /* * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty, * we need to retry s3c_hsotg_handle_rx if this is still @@ -2500,29 +2500,29 @@ irq_retry: s3c_hsotg_handle_rx(hsotg); } - if (gintsts & S3C_GINTSTS_ModeMis) { + if (gintsts & GINTSTS_ModeMis) { dev_warn(hsotg->dev, "warning, mode mismatch triggered\n"); - writel(S3C_GINTSTS_ModeMis, hsotg->regs + S3C_GINTSTS); + writel(GINTSTS_ModeMis, hsotg->regs + GINTSTS); } - if (gintsts & S3C_GINTSTS_USBSusp) { - dev_info(hsotg->dev, "S3C_GINTSTS_USBSusp\n"); - writel(S3C_GINTSTS_USBSusp, hsotg->regs + S3C_GINTSTS); + if (gintsts & GINTSTS_USBSusp) { + dev_info(hsotg->dev, "GINTSTS_USBSusp\n"); + writel(GINTSTS_USBSusp, hsotg->regs + GINTSTS); call_gadget(hsotg, suspend); s3c_hsotg_disconnect(hsotg); } - if (gintsts & S3C_GINTSTS_WkUpInt) { - dev_info(hsotg->dev, "S3C_GINTSTS_WkUpIn\n"); - writel(S3C_GINTSTS_WkUpInt, hsotg->regs + S3C_GINTSTS); + if (gintsts & GINTSTS_WkUpInt) { + dev_info(hsotg->dev, "GINTSTS_WkUpIn\n"); + writel(GINTSTS_WkUpInt, hsotg->regs + GINTSTS); call_gadget(hsotg, resume); } - if (gintsts & S3C_GINTSTS_ErlySusp) { - dev_dbg(hsotg->dev, "S3C_GINTSTS_ErlySusp\n"); - writel(S3C_GINTSTS_ErlySusp, hsotg->regs + S3C_GINTSTS); + if (gintsts & GINTSTS_ErlySusp) { + dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n"); + writel(GINTSTS_ErlySusp, hsotg->regs + GINTSTS); s3c_hsotg_disconnect(hsotg); } @@ -2533,18 +2533,18 @@ irq_retry: * the occurrence. */ - if (gintsts & S3C_GINTSTS_GOUTNakEff) { + if (gintsts & GINTSTS_GOUTNakEff) { dev_info(hsotg->dev, "GOUTNakEff triggered\n"); - writel(S3C_DCTL_CGOUTNak, hsotg->regs + S3C_DCTL); + writel(DCTL_CGOUTNak, hsotg->regs + DCTL); s3c_hsotg_dump(hsotg); } - if (gintsts & S3C_GINTSTS_GINNakEff) { + if (gintsts & GINTSTS_GINNakEff) { dev_info(hsotg->dev, "GINNakEff triggered\n"); - writel(S3C_DCTL_CGNPInNAK, hsotg->regs + S3C_DCTL); + writel(DCTL_CGNPInNAK, hsotg->regs + DCTL); s3c_hsotg_dump(hsotg); } @@ -2598,7 +2598,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, /* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */ - epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index); + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); epctrl = readl(hsotg->regs + epctrl_reg); dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n", @@ -2606,14 +2606,14 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, spin_lock_irqsave(&hs_ep->lock, flags); - epctrl &= ~(S3C_DxEPCTL_EPType_MASK | S3C_DxEPCTL_MPS_MASK); - epctrl |= S3C_DxEPCTL_MPS(mps); + epctrl &= ~(DxEPCTL_EPType_MASK | DxEPCTL_MPS_MASK); + epctrl |= DxEPCTL_MPS(mps); /* * mark the endpoint as active, otherwise the core may ignore * transactions entirely for this endpoint */ - epctrl |= S3C_DxEPCTL_USBActEp; + epctrl |= DxEPCTL_USBActEp; /* * set the NAK status on the endpoint, otherwise we might try and @@ -2622,7 +2622,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, * size register hasn't been set. */ - epctrl |= S3C_DxEPCTL_SNAK; + epctrl |= DxEPCTL_SNAK; /* update the endpoint state */ hs_ep->ep.maxpacket = mps; @@ -2637,7 +2637,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, goto out; case USB_ENDPOINT_XFER_BULK: - epctrl |= S3C_DxEPCTL_EPType_Bulk; + epctrl |= DxEPCTL_EPType_Bulk; break; case USB_ENDPOINT_XFER_INT: @@ -2650,14 +2650,14 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, */ hs_ep->periodic = 1; - epctrl |= S3C_DxEPCTL_TxFNum(index); + epctrl |= DxEPCTL_TxFNum(index); } - epctrl |= S3C_DxEPCTL_EPType_Intterupt; + epctrl |= DxEPCTL_EPType_Intterupt; break; case USB_ENDPOINT_XFER_CONTROL: - epctrl |= S3C_DxEPCTL_EPType_Control; + epctrl |= DxEPCTL_EPType_Control; break; } @@ -2666,11 +2666,11 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, * a unique tx-fifo even if it is non-periodic. */ if (dir_in && hsotg->dedicated_fifos) - epctrl |= S3C_DxEPCTL_TxFNum(index); + epctrl |= DxEPCTL_TxFNum(index); /* for non control endpoints, set PID to D0 */ if (index) - epctrl |= S3C_DxEPCTL_SetD0PID; + epctrl |= DxEPCTL_SetD0PID; dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n", __func__, epctrl); @@ -2708,7 +2708,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) return -EINVAL; } - epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index); + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); /* terminate all requests with shutdown */ kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false); @@ -2716,9 +2716,9 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) spin_lock_irqsave(&hs_ep->lock, flags); ctrl = readl(hsotg->regs + epctrl_reg); - ctrl &= ~S3C_DxEPCTL_EPEna; - ctrl &= ~S3C_DxEPCTL_USBActEp; - ctrl |= S3C_DxEPCTL_SNAK; + ctrl &= ~DxEPCTL_EPEna; + ctrl &= ~DxEPCTL_USBActEp; + ctrl |= DxEPCTL_SNAK; dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); writel(ctrl, hsotg->regs + epctrl_reg); @@ -2795,34 +2795,34 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) /* write both IN and OUT control registers */ - epreg = S3C_DIEPCTL(index); + epreg = DIEPCTL(index); epctl = readl(hs->regs + epreg); if (value) { - epctl |= S3C_DxEPCTL_Stall + S3C_DxEPCTL_SNAK; - if (epctl & S3C_DxEPCTL_EPEna) - epctl |= S3C_DxEPCTL_EPDis; + epctl |= DxEPCTL_Stall + DxEPCTL_SNAK; + if (epctl & DxEPCTL_EPEna) + epctl |= DxEPCTL_EPDis; } else { - epctl &= ~S3C_DxEPCTL_Stall; - xfertype = epctl & S3C_DxEPCTL_EPType_MASK; - if (xfertype == S3C_DxEPCTL_EPType_Bulk || - xfertype == S3C_DxEPCTL_EPType_Intterupt) - epctl |= S3C_DxEPCTL_SetD0PID; + epctl &= ~DxEPCTL_Stall; + xfertype = epctl & DxEPCTL_EPType_MASK; + if (xfertype == DxEPCTL_EPType_Bulk || + xfertype == DxEPCTL_EPType_Intterupt) + epctl |= DxEPCTL_SetD0PID; } writel(epctl, hs->regs + epreg); - epreg = S3C_DOEPCTL(index); + epreg = DOEPCTL(index); epctl = readl(hs->regs + epreg); if (value) - epctl |= S3C_DxEPCTL_Stall; + epctl |= DxEPCTL_Stall; else { - epctl &= ~S3C_DxEPCTL_Stall; - xfertype = epctl & S3C_DxEPCTL_EPType_MASK; - if (xfertype == S3C_DxEPCTL_EPType_Bulk || - xfertype == S3C_DxEPCTL_EPType_Intterupt) - epctl |= S3C_DxEPCTL_SetD0PID; + epctl &= ~DxEPCTL_Stall; + xfertype = epctl & DxEPCTL_EPType_MASK; + if (xfertype == DxEPCTL_EPType_Bulk || + xfertype == DxEPCTL_EPType_Intterupt) + epctl |= DxEPCTL_SetD0PID; } writel(epctl, hs->regs + epreg); @@ -2882,39 +2882,39 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) { /* unmask subset of endpoint interrupts */ - writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | - S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk, - hsotg->regs + S3C_DIEPMSK); + writel(DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk | + DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk, + hsotg->regs + DIEPMSK); - writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk | - S3C_DOEPMSK_EPDisbldMsk | S3C_DOEPMSK_XferComplMsk, - hsotg->regs + S3C_DOEPMSK); + writel(DOEPMSK_SetupMsk | DOEPMSK_AHBErrMsk | + DOEPMSK_EPDisbldMsk | DOEPMSK_XferComplMsk, + hsotg->regs + DOEPMSK); - writel(0, hsotg->regs + S3C_DAINTMSK); + writel(0, hsotg->regs + DAINTMSK); /* Be in disconnected state until gadget is registered */ - __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon); + __orr32(hsotg->regs + DCTL, DCTL_SftDiscon); if (0) { /* post global nak until we're ready */ - writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak, - hsotg->regs + S3C_DCTL); + writel(DCTL_SGNPInNAK | DCTL_SGOUTNak, + hsotg->regs + DCTL); } /* setup fifos */ dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", - readl(hsotg->regs + S3C_GRXFSIZ), - readl(hsotg->regs + S3C_GNPTXFSIZ)); + readl(hsotg->regs + GRXFSIZ), + readl(hsotg->regs + GNPTXFSIZ)); s3c_hsotg_init_fifo(hsotg); /* set the PLL on, remove the HNP/SRP and set the PHY */ - writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | (0x5 << 10), - hsotg->regs + S3C_GUSBCFG); + writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) | (0x5 << 10), + hsotg->regs + GUSBCFG); - writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0, - hsotg->regs + S3C_GAHBCFG); + writel(using_dma(hsotg) ? GAHBCFG_DMAEn : 0x0, + hsotg->regs + GAHBCFG); } /** @@ -3080,8 +3080,8 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, * code is changed to make each endpoint's direction changeable. */ - ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum)); - hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4; + ptxfifo = readl(hsotg->regs + DPTXFSIZn(epnum)); + hs_ep->fifo_size = DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4; /* * if we're using dma, we need to set the next-endpoint pointer @@ -3089,9 +3089,9 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, */ if (using_dma(hsotg)) { - u32 next = S3C_DxEPCTL_NextEp((epnum + 1) % 15); - writel(next, hsotg->regs + S3C_DIEPCTL(epnum)); - writel(next, hsotg->regs + S3C_DOEPCTL(epnum)); + u32 next = DxEPCTL_NextEp((epnum + 1) % 15); + writel(next, hsotg->regs + DIEPCTL(epnum)); + writel(next, hsotg->regs + DOEPCTL(epnum)); } } @@ -3131,42 +3131,42 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) int idx; dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n", - readl(regs + S3C_DCFG), readl(regs + S3C_DCTL), - readl(regs + S3C_DIEPMSK)); + readl(regs + DCFG), readl(regs + DCTL), + readl(regs + DIEPMSK)); dev_info(dev, "GAHBCFG=0x%08x, 0x44=0x%08x\n", - readl(regs + S3C_GAHBCFG), readl(regs + 0x44)); + readl(regs + GAHBCFG), readl(regs + 0x44)); dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", - readl(regs + S3C_GRXFSIZ), readl(regs + S3C_GNPTXFSIZ)); + readl(regs + GRXFSIZ), readl(regs + GNPTXFSIZ)); /* show periodic fifo settings */ for (idx = 1; idx <= 15; idx++) { - val = readl(regs + S3C_DPTXFSIZn(idx)); + val = readl(regs + DPTXFSIZn(idx)); dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx, - val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT, - val & S3C_DPTXFSIZn_DPTxFStAddr_MASK); + val >> DPTXFSIZn_DPTxFSize_SHIFT, + val & DPTXFSIZn_DPTxFStAddr_MASK); } for (idx = 0; idx < 15; idx++) { dev_info(dev, "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx, - readl(regs + S3C_DIEPCTL(idx)), - readl(regs + S3C_DIEPTSIZ(idx)), - readl(regs + S3C_DIEPDMA(idx))); + readl(regs + DIEPCTL(idx)), + readl(regs + DIEPTSIZ(idx)), + readl(regs + DIEPDMA(idx))); - val = readl(regs + S3C_DOEPCTL(idx)); + val = readl(regs + DOEPCTL(idx)); dev_info(dev, "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", - idx, readl(regs + S3C_DOEPCTL(idx)), - readl(regs + S3C_DOEPTSIZ(idx)), - readl(regs + S3C_DOEPDMA(idx))); + idx, readl(regs + DOEPCTL(idx)), + readl(regs + DOEPTSIZ(idx)), + readl(regs + DOEPDMA(idx))); } dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n", - readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE)); + readl(regs + DVBUSDIS), readl(regs + DVBUSPULSE)); #endif } @@ -3186,38 +3186,38 @@ static int state_show(struct seq_file *seq, void *v) int idx; seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n", - readl(regs + S3C_DCFG), - readl(regs + S3C_DCTL), - readl(regs + S3C_DSTS)); + readl(regs + DCFG), + readl(regs + DCTL), + readl(regs + DSTS)); seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n", - readl(regs + S3C_DIEPMSK), readl(regs + S3C_DOEPMSK)); + readl(regs + DIEPMSK), readl(regs + DOEPMSK)); seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n", - readl(regs + S3C_GINTMSK), - readl(regs + S3C_GINTSTS)); + readl(regs + GINTMSK), + readl(regs + GINTSTS)); seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n", - readl(regs + S3C_DAINTMSK), - readl(regs + S3C_DAINT)); + readl(regs + DAINTMSK), + readl(regs + DAINT)); seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n", - readl(regs + S3C_GNPTXSTS), - readl(regs + S3C_GRXSTSR)); + readl(regs + GNPTXSTS), + readl(regs + GRXSTSR)); seq_printf(seq, "\nEndpoint status:\n"); for (idx = 0; idx < 15; idx++) { u32 in, out; - in = readl(regs + S3C_DIEPCTL(idx)); - out = readl(regs + S3C_DOEPCTL(idx)); + in = readl(regs + DIEPCTL(idx)); + out = readl(regs + DOEPCTL(idx)); seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x", idx, in, out); - in = readl(regs + S3C_DIEPTSIZ(idx)); - out = readl(regs + S3C_DOEPTSIZ(idx)); + in = readl(regs + DIEPTSIZ(idx)); + out = readl(regs + DOEPTSIZ(idx)); seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x", in, out); @@ -3257,21 +3257,21 @@ static int fifo_show(struct seq_file *seq, void *v) int idx; seq_printf(seq, "Non-periodic FIFOs:\n"); - seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + S3C_GRXFSIZ)); + seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ)); - val = readl(regs + S3C_GNPTXFSIZ); + val = readl(regs + GNPTXFSIZ); seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n", - val >> S3C_GNPTXFSIZ_NPTxFDep_SHIFT, - val & S3C_GNPTXFSIZ_NPTxFStAddr_MASK); + val >> GNPTXFSIZ_NPTxFDep_SHIFT, + val & GNPTXFSIZ_NPTxFStAddr_MASK); seq_printf(seq, "\nPeriodic TXFIFOs:\n"); for (idx = 1; idx <= 15; idx++) { - val = readl(regs + S3C_DPTXFSIZn(idx)); + val = readl(regs + DPTXFSIZn(idx)); seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx, - val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT, - val & S3C_DPTXFSIZn_DPTxFStAddr_MASK); + val >> DPTXFSIZn_DPTxFSize_SHIFT, + val & DPTXFSIZn_DPTxFStAddr_MASK); } return 0; @@ -3320,20 +3320,20 @@ static int ep_show(struct seq_file *seq, void *v) /* first show the register state */ seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n", - readl(regs + S3C_DIEPCTL(index)), - readl(regs + S3C_DOEPCTL(index))); + readl(regs + DIEPCTL(index)), + readl(regs + DOEPCTL(index))); seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n", - readl(regs + S3C_DIEPDMA(index)), - readl(regs + S3C_DOEPDMA(index))); + readl(regs + DIEPDMA(index)), + readl(regs + DOEPDMA(index))); seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n", - readl(regs + S3C_DIEPINT(index)), - readl(regs + S3C_DOEPINT(index))); + readl(regs + DIEPINT(index)), + readl(regs + DOEPINT(index))); seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n", - readl(regs + S3C_DIEPTSIZ(index)), - readl(regs + S3C_DOEPTSIZ(index))); + readl(regs + DIEPTSIZ(index)), + readl(regs + DOEPTSIZ(index))); seq_printf(seq, "\n"); seq_printf(seq, "mps %d\n", ep->ep.maxpacket); diff --git a/drivers/usb/gadget/s3c-hsotg.h b/drivers/usb/gadget/s3c-hsotg.h index 4c4ccc4..d650b12 100644 --- a/drivers/usb/gadget/s3c-hsotg.h +++ b/drivers/usb/gadget/s3c-hsotg.h @@ -1,379 +1,377 @@ -/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h +/* drivers/usb/gadget/s3c-hsotg.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks * - * S3C - USB2.0 Highspeed/OtG device block registers + * USB2.0 Highspeed/OtG Synopsis DWC2 device block registers * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H -#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__ - -#define S3C_HSOTG_REG(x) (x) - -#define S3C_GOTGCTL S3C_HSOTG_REG(0x000) -#define S3C_GOTGCTL_BSESVLD (1 << 19) -#define S3C_GOTGCTL_ASESVLD (1 << 18) -#define S3C_GOTGCTL_DBNC_SHORT (1 << 17) -#define S3C_GOTGCTL_CONID_B (1 << 16) -#define S3C_GOTGCTL_DEVHNPEN (1 << 11) -#define S3C_GOTGCTL_HSSETHNPEN (1 << 10) -#define S3C_GOTGCTL_HNPREQ (1 << 9) -#define S3C_GOTGCTL_HSTNEGSCS (1 << 8) -#define S3C_GOTGCTL_SESREQ (1 << 1) -#define S3C_GOTGCTL_SESREQSCS (1 << 0) - -#define S3C_GOTGINT S3C_HSOTG_REG(0x004) -#define S3C_GOTGINT_DbnceDone (1 << 19) -#define S3C_GOTGINT_ADevTOUTChg (1 << 18) -#define S3C_GOTGINT_HstNegDet (1 << 17) -#define S3C_GOTGINT_HstnegSucStsChng (1 << 9) -#define S3C_GOTGINT_SesReqSucStsChng (1 << 8) -#define S3C_GOTGINT_SesEndDet (1 << 2) - -#define S3C_GAHBCFG S3C_HSOTG_REG(0x008) -#define S3C_GAHBCFG_PTxFEmpLvl (1 << 8) -#define S3C_GAHBCFG_NPTxFEmpLvl (1 << 7) -#define S3C_GAHBCFG_DMAEn (1 << 5) -#define S3C_GAHBCFG_HBstLen_MASK (0xf << 1) -#define S3C_GAHBCFG_HBstLen_SHIFT (1) -#define S3C_GAHBCFG_HBstLen_Single (0x0 << 1) -#define S3C_GAHBCFG_HBstLen_Incr (0x1 << 1) -#define S3C_GAHBCFG_HBstLen_Incr4 (0x3 << 1) -#define S3C_GAHBCFG_HBstLen_Incr8 (0x5 << 1) -#define S3C_GAHBCFG_HBstLen_Incr16 (0x7 << 1) -#define S3C_GAHBCFG_GlblIntrEn (1 << 0) - -#define S3C_GUSBCFG S3C_HSOTG_REG(0x00C) -#define S3C_GUSBCFG_PHYLPClkSel (1 << 15) -#define S3C_GUSBCFG_HNPCap (1 << 9) -#define S3C_GUSBCFG_SRPCap (1 << 8) -#define S3C_GUSBCFG_PHYIf16 (1 << 3) -#define S3C_GUSBCFG_TOutCal_MASK (0x7 << 0) -#define S3C_GUSBCFG_TOutCal_SHIFT (0) -#define S3C_GUSBCFG_TOutCal_LIMIT (0x7) -#define S3C_GUSBCFG_TOutCal(_x) ((_x) << 0) - -#define S3C_GRSTCTL S3C_HSOTG_REG(0x010) - -#define S3C_GRSTCTL_AHBIdle (1 << 31) -#define S3C_GRSTCTL_DMAReq (1 << 30) -#define S3C_GRSTCTL_TxFNum_MASK (0x1f << 6) -#define S3C_GRSTCTL_TxFNum_SHIFT (6) -#define S3C_GRSTCTL_TxFNum_LIMIT (0x1f) -#define S3C_GRSTCTL_TxFNum(_x) ((_x) << 6) -#define S3C_GRSTCTL_TxFFlsh (1 << 5) -#define S3C_GRSTCTL_RxFFlsh (1 << 4) -#define S3C_GRSTCTL_INTknQFlsh (1 << 3) -#define S3C_GRSTCTL_FrmCntrRst (1 << 2) -#define S3C_GRSTCTL_HSftRst (1 << 1) -#define S3C_GRSTCTL_CSftRst (1 << 0) - -#define S3C_GINTSTS S3C_HSOTG_REG(0x014) -#define S3C_GINTMSK S3C_HSOTG_REG(0x018) - -#define S3C_GINTSTS_WkUpInt (1 << 31) -#define S3C_GINTSTS_SessReqInt (1 << 30) -#define S3C_GINTSTS_DisconnInt (1 << 29) -#define S3C_GINTSTS_ConIDStsChng (1 << 28) -#define S3C_GINTSTS_PTxFEmp (1 << 26) -#define S3C_GINTSTS_HChInt (1 << 25) -#define S3C_GINTSTS_PrtInt (1 << 24) -#define S3C_GINTSTS_FetSusp (1 << 22) -#define S3C_GINTSTS_incompIP (1 << 21) -#define S3C_GINTSTS_IncomplSOIN (1 << 20) -#define S3C_GINTSTS_OEPInt (1 << 19) -#define S3C_GINTSTS_IEPInt (1 << 18) -#define S3C_GINTSTS_EPMis (1 << 17) -#define S3C_GINTSTS_EOPF (1 << 15) -#define S3C_GINTSTS_ISOutDrop (1 << 14) -#define S3C_GINTSTS_EnumDone (1 << 13) -#define S3C_GINTSTS_USBRst (1 << 12) -#define S3C_GINTSTS_USBSusp (1 << 11) -#define S3C_GINTSTS_ErlySusp (1 << 10) -#define S3C_GINTSTS_GOUTNakEff (1 << 7) -#define S3C_GINTSTS_GINNakEff (1 << 6) -#define S3C_GINTSTS_NPTxFEmp (1 << 5) -#define S3C_GINTSTS_RxFLvl (1 << 4) -#define S3C_GINTSTS_SOF (1 << 3) -#define S3C_GINTSTS_OTGInt (1 << 2) -#define S3C_GINTSTS_ModeMis (1 << 1) -#define S3C_GINTSTS_CurMod_Host (1 << 0) - -#define S3C_GRXSTSR S3C_HSOTG_REG(0x01C) -#define S3C_GRXSTSP S3C_HSOTG_REG(0x020) - -#define S3C_GRXSTS_FN_MASK (0x7f << 25) -#define S3C_GRXSTS_FN_SHIFT (25) - -#define S3C_GRXSTS_PktSts_MASK (0xf << 17) -#define S3C_GRXSTS_PktSts_SHIFT (17) -#define S3C_GRXSTS_PktSts_GlobalOutNAK (0x1 << 17) -#define S3C_GRXSTS_PktSts_OutRX (0x2 << 17) -#define S3C_GRXSTS_PktSts_OutDone (0x3 << 17) -#define S3C_GRXSTS_PktSts_SetupDone (0x4 << 17) -#define S3C_GRXSTS_PktSts_SetupRX (0x6 << 17) - -#define S3C_GRXSTS_DPID_MASK (0x3 << 15) -#define S3C_GRXSTS_DPID_SHIFT (15) -#define S3C_GRXSTS_ByteCnt_MASK (0x7ff << 4) -#define S3C_GRXSTS_ByteCnt_SHIFT (4) -#define S3C_GRXSTS_EPNum_MASK (0xf << 0) -#define S3C_GRXSTS_EPNum_SHIFT (0) - -#define S3C_GRXFSIZ S3C_HSOTG_REG(0x024) - -#define S3C_GNPTXFSIZ S3C_HSOTG_REG(0x028) - -#define S3C_GNPTXFSIZ_NPTxFDep_MASK (0xffff << 16) -#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT (16) -#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT (0xffff) -#define S3C_GNPTXFSIZ_NPTxFDep(_x) ((_x) << 16) -#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK (0xffff << 0) -#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT (0) -#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT (0xffff) -#define S3C_GNPTXFSIZ_NPTxFStAddr(_x) ((_x) << 0) - -#define S3C_GNPTXSTS S3C_HSOTG_REG(0x02C) - -#define S3C_GNPTXSTS_NPtxQTop_MASK (0x7f << 24) -#define S3C_GNPTXSTS_NPtxQTop_SHIFT (24) - -#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK (0xff << 16) -#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT (16) -#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v) (((_v) >> 16) & 0xff) - -#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK (0xffff << 0) -#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT (0) -#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v) (((_v) >> 0) & 0xffff) - - -#define S3C_HPTXFSIZ S3C_HSOTG_REG(0x100) - -#define S3C_DPTXFSIZn(_a) S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4)) - -#define S3C_DPTXFSIZn_DPTxFSize_MASK (0xffff << 16) -#define S3C_DPTXFSIZn_DPTxFSize_SHIFT (16) -#define S3C_DPTXFSIZn_DPTxFSize_GET(_v) (((_v) >> 16) & 0xffff) -#define S3C_DPTXFSIZn_DPTxFSize_LIMIT (0xffff) -#define S3C_DPTXFSIZn_DPTxFSize(_x) ((_x) << 16) - -#define S3C_DPTXFSIZn_DPTxFStAddr_MASK (0xffff << 0) -#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT (0) +#ifndef __REGS_USB_HSOTG_H +#define __REGS_USB_HSOTG_H __FILE__ + +#define HSOTG_REG(x) (x) + +#define GOTGCTL HSOTG_REG(0x000) +#define GOTGCTL_BSESVLD (1 << 19) +#define GOTGCTL_ASESVLD (1 << 18) +#define GOTGCTL_DBNC_SHORT (1 << 17) +#define GOTGCTL_CONID_B (1 << 16) +#define GOTGCTL_DEVHNPEN (1 << 11) +#define GOTGCTL_HSSETHNPEN (1 << 10) +#define GOTGCTL_HNPREQ (1 << 9) +#define GOTGCTL_HSTNEGSCS (1 << 8) +#define GOTGCTL_SESREQ (1 << 1) +#define GOTGCTL_SESREQSCS (1 << 0) + +#define GOTGINT HSOTG_REG(0x004) +#define GOTGINT_DbnceDone (1 << 19) +#define GOTGINT_ADevTOUTChg (1 << 18) +#define GOTGINT_HstNegDet (1 << 17) +#define GOTGINT_HstnegSucStsChng (1 << 9) +#define GOTGINT_SesReqSucStsChng (1 << 8) +#define GOTGINT_SesEndDet (1 << 2) + +#define GAHBCFG HSOTG_REG(0x008) +#define GAHBCFG_PTxFEmpLvl (1 << 8) +#define GAHBCFG_NPTxFEmpLvl (1 << 7) +#define GAHBCFG_DMAEn (1 << 5) +#define GAHBCFG_HBstLen_MASK (0xf << 1) +#define GAHBCFG_HBstLen_SHIFT (1) +#define GAHBCFG_HBstLen_Single (0x0 << 1) +#define GAHBCFG_HBstLen_Incr (0x1 << 1) +#define GAHBCFG_HBstLen_Incr4 (0x3 << 1) +#define GAHBCFG_HBstLen_Incr8 (0x5 << 1) +#define GAHBCFG_HBstLen_Incr16 (0x7 << 1) +#define GAHBCFG_GlblIntrEn (1 << 0) + +#define GUSBCFG HSOTG_REG(0x00C) +#define GUSBCFG_PHYLPClkSel (1 << 15) +#define GUSBCFG_HNPCap (1 << 9) +#define GUSBCFG_SRPCap (1 << 8) +#define GUSBCFG_PHYIf16 (1 << 3) +#define GUSBCFG_TOutCal_MASK (0x7 << 0) +#define GUSBCFG_TOutCal_SHIFT (0) +#define GUSBCFG_TOutCal_LIMIT (0x7) +#define GUSBCFG_TOutCal(_x) ((_x) << 0) + +#define GRSTCTL HSOTG_REG(0x010) + +#define GRSTCTL_AHBIdle (1 << 31) +#define GRSTCTL_DMAReq (1 << 30) +#define GRSTCTL_TxFNum_MASK (0x1f << 6) +#define GRSTCTL_TxFNum_SHIFT (6) +#define GRSTCTL_TxFNum_LIMIT (0x1f) +#define GRSTCTL_TxFNum(_x) ((_x) << 6) +#define GRSTCTL_TxFFlsh (1 << 5) +#define GRSTCTL_RxFFlsh (1 << 4) +#define GRSTCTL_INTknQFlsh (1 << 3) +#define GRSTCTL_FrmCntrRst (1 << 2) +#define GRSTCTL_HSftRst (1 << 1) +#define GRSTCTL_CSftRst (1 << 0) + +#define GINTSTS HSOTG_REG(0x014) +#define GINTMSK HSOTG_REG(0x018) + +#define GINTSTS_WkUpInt (1 << 31) +#define GINTSTS_SessReqInt (1 << 30) +#define GINTSTS_DisconnInt (1 << 29) +#define GINTSTS_ConIDStsChng (1 << 28) +#define GINTSTS_PTxFEmp (1 << 26) +#define GINTSTS_HChInt (1 << 25) +#define GINTSTS_PrtInt (1 << 24) +#define GINTSTS_FetSusp (1 << 22) +#define GINTSTS_incompIP (1 << 21) +#define GINTSTS_IncomplSOIN (1 << 20) +#define GINTSTS_OEPInt (1 << 19) +#define GINTSTS_IEPInt (1 << 18) +#define GINTSTS_EPMis (1 << 17) +#define GINTSTS_EOPF (1 << 15) +#define GINTSTS_ISOutDrop (1 << 14) +#define GINTSTS_EnumDone (1 << 13) +#define GINTSTS_USBRst (1 << 12) +#define GINTSTS_USBSusp (1 << 11) +#define GINTSTS_ErlySusp (1 << 10) +#define GINTSTS_GOUTNakEff (1 << 7) +#define GINTSTS_GINNakEff (1 << 6) +#define GINTSTS_NPTxFEmp (1 << 5) +#define GINTSTS_RxFLvl (1 << 4) +#define GINTSTS_SOF (1 << 3) +#define GINTSTS_OTGInt (1 << 2) +#define GINTSTS_ModeMis (1 << 1) +#define GINTSTS_CurMod_Host (1 << 0) + +#define GRXSTSR HSOTG_REG(0x01C) +#define GRXSTSP HSOTG_REG(0x020) + +#define GRXSTS_FN_MASK (0x7f << 25) +#define GRXSTS_FN_SHIFT (25) + +#define GRXSTS_PktSts_MASK (0xf << 17) +#define GRXSTS_PktSts_SHIFT (17) +#define GRXSTS_PktSts_GlobalOutNAK (0x1 << 17) +#define GRXSTS_PktSts_OutRX (0x2 << 17) +#define GRXSTS_PktSts_OutDone (0x3 << 17) +#define GRXSTS_PktSts_SetupDone (0x4 << 17) +#define GRXSTS_PktSts_SetupRX (0x6 << 17) + +#define GRXSTS_DPID_MASK (0x3 << 15) +#define GRXSTS_DPID_SHIFT (15) +#define GRXSTS_ByteCnt_MASK (0x7ff << 4) +#define GRXSTS_ByteCnt_SHIFT (4) +#define GRXSTS_EPNum_MASK (0xf << 0) +#define GRXSTS_EPNum_SHIFT (0) + +#define GRXFSIZ HSOTG_REG(0x024) + +#define GNPTXFSIZ HSOTG_REG(0x028) + +#define GNPTXFSIZ_NPTxFDep_MASK (0xffff << 16) +#define GNPTXFSIZ_NPTxFDep_SHIFT (16) +#define GNPTXFSIZ_NPTxFDep_LIMIT (0xffff) +#define GNPTXFSIZ_NPTxFDep(_x) ((_x) << 16) +#define GNPTXFSIZ_NPTxFStAddr_MASK (0xffff << 0) +#define GNPTXFSIZ_NPTxFStAddr_SHIFT (0) +#define GNPTXFSIZ_NPTxFStAddr_LIMIT (0xffff) +#define GNPTXFSIZ_NPTxFStAddr(_x) ((_x) << 0) + +#define GNPTXSTS HSOTG_REG(0x02C) + +#define GNPTXSTS_NPtxQTop_MASK (0x7f << 24) +#define GNPTXSTS_NPtxQTop_SHIFT (24) + +#define GNPTXSTS_NPTxQSpcAvail_MASK (0xff << 16) +#define GNPTXSTS_NPTxQSpcAvail_SHIFT (16) +#define GNPTXSTS_NPTxQSpcAvail_GET(_v) (((_v) >> 16) & 0xff) + +#define GNPTXSTS_NPTxFSpcAvail_MASK (0xffff << 0) +#define GNPTXSTS_NPTxFSpcAvail_SHIFT (0) +#define GNPTXSTS_NPTxFSpcAvail_GET(_v) (((_v) >> 0) & 0xffff) + + +#define HPTXFSIZ HSOTG_REG(0x100) + +#define DPTXFSIZn(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4)) + +#define DPTXFSIZn_DPTxFSize_MASK (0xffff << 16) +#define DPTXFSIZn_DPTxFSize_SHIFT (16) +#define DPTXFSIZn_DPTxFSize_GET(_v) (((_v) >> 16) & 0xffff) +#define DPTXFSIZn_DPTxFSize_LIMIT (0xffff) +#define DPTXFSIZn_DPTxFSize(_x) ((_x) << 16) + +#define DPTXFSIZn_DPTxFStAddr_MASK (0xffff << 0) +#define DPTXFSIZn_DPTxFStAddr_SHIFT (0) /* Device mode registers */ -#define S3C_DCFG S3C_HSOTG_REG(0x800) - -#define S3C_DCFG_EPMisCnt_MASK (0x1f << 18) -#define S3C_DCFG_EPMisCnt_SHIFT (18) -#define S3C_DCFG_EPMisCnt_LIMIT (0x1f) -#define S3C_DCFG_EPMisCnt(_x) ((_x) << 18) - -#define S3C_DCFG_PerFrInt_MASK (0x3 << 11) -#define S3C_DCFG_PerFrInt_SHIFT (11) -#define S3C_DCFG_PerFrInt_LIMIT (0x3) -#define S3C_DCFG_PerFrInt(_x) ((_x) << 11) - -#define S3C_DCFG_DevAddr_MASK (0x7f << 4) -#define S3C_DCFG_DevAddr_SHIFT (4) -#define S3C_DCFG_DevAddr_LIMIT (0x7f) -#define S3C_DCFG_DevAddr(_x) ((_x) << 4) - -#define S3C_DCFG_NZStsOUTHShk (1 << 2) - -#define S3C_DCFG_DevSpd_MASK (0x3 << 0) -#define S3C_DCFG_DevSpd_SHIFT (0) -#define S3C_DCFG_DevSpd_HS (0x0 << 0) -#define S3C_DCFG_DevSpd_FS (0x1 << 0) -#define S3C_DCFG_DevSpd_LS (0x2 << 0) -#define S3C_DCFG_DevSpd_FS48 (0x3 << 0) - -#define S3C_DCTL S3C_HSOTG_REG(0x804) - -#define S3C_DCTL_PWROnPrgDone (1 << 11) -#define S3C_DCTL_CGOUTNak (1 << 10) -#define S3C_DCTL_SGOUTNak (1 << 9) -#define S3C_DCTL_CGNPInNAK (1 << 8) -#define S3C_DCTL_SGNPInNAK (1 << 7) -#define S3C_DCTL_TstCtl_MASK (0x7 << 4) -#define S3C_DCTL_TstCtl_SHIFT (4) -#define S3C_DCTL_GOUTNakSts (1 << 3) -#define S3C_DCTL_GNPINNakSts (1 << 2) -#define S3C_DCTL_SftDiscon (1 << 1) -#define S3C_DCTL_RmtWkUpSig (1 << 0) - -#define S3C_DSTS S3C_HSOTG_REG(0x808) - -#define S3C_DSTS_SOFFN_MASK (0x3fff << 8) -#define S3C_DSTS_SOFFN_SHIFT (8) -#define S3C_DSTS_SOFFN_LIMIT (0x3fff) -#define S3C_DSTS_SOFFN(_x) ((_x) << 8) -#define S3C_DSTS_ErraticErr (1 << 3) -#define S3C_DSTS_EnumSpd_MASK (0x3 << 1) -#define S3C_DSTS_EnumSpd_SHIFT (1) -#define S3C_DSTS_EnumSpd_HS (0x0 << 1) -#define S3C_DSTS_EnumSpd_FS (0x1 << 1) -#define S3C_DSTS_EnumSpd_LS (0x2 << 1) -#define S3C_DSTS_EnumSpd_FS48 (0x3 << 1) - -#define S3C_DSTS_SuspSts (1 << 0) - -#define S3C_DIEPMSK S3C_HSOTG_REG(0x810) - -#define S3C_DIEPMSK_TxFIFOEmpty (1 << 7) -#define S3C_DIEPMSK_INEPNakEffMsk (1 << 6) -#define S3C_DIEPMSK_INTknEPMisMsk (1 << 5) -#define S3C_DIEPMSK_INTknTXFEmpMsk (1 << 4) -#define S3C_DIEPMSK_TimeOUTMsk (1 << 3) -#define S3C_DIEPMSK_AHBErrMsk (1 << 2) -#define S3C_DIEPMSK_EPDisbldMsk (1 << 1) -#define S3C_DIEPMSK_XferComplMsk (1 << 0) - -#define S3C_DOEPMSK S3C_HSOTG_REG(0x814) - -#define S3C_DOEPMSK_Back2BackSetup (1 << 6) -#define S3C_DOEPMSK_OUTTknEPdisMsk (1 << 4) -#define S3C_DOEPMSK_SetupMsk (1 << 3) -#define S3C_DOEPMSK_AHBErrMsk (1 << 2) -#define S3C_DOEPMSK_EPDisbldMsk (1 << 1) -#define S3C_DOEPMSK_XferComplMsk (1 << 0) - -#define S3C_DAINT S3C_HSOTG_REG(0x818) -#define S3C_DAINTMSK S3C_HSOTG_REG(0x81C) - -#define S3C_DAINT_OutEP_SHIFT (16) -#define S3C_DAINT_OutEP(x) (1 << ((x) + 16)) -#define S3C_DAINT_InEP(x) (1 << (x)) - -#define S3C_DTKNQR1 S3C_HSOTG_REG(0x820) -#define S3C_DTKNQR2 S3C_HSOTG_REG(0x824) -#define S3C_DTKNQR3 S3C_HSOTG_REG(0x830) -#define S3C_DTKNQR4 S3C_HSOTG_REG(0x834) - -#define S3C_DVBUSDIS S3C_HSOTG_REG(0x828) -#define S3C_DVBUSPULSE S3C_HSOTG_REG(0x82C) - -#define S3C_DIEPCTL0 S3C_HSOTG_REG(0x900) -#define S3C_DOEPCTL0 S3C_HSOTG_REG(0xB00) -#define S3C_DIEPCTL(_a) S3C_HSOTG_REG(0x900 + ((_a) * 0x20)) -#define S3C_DOEPCTL(_a) S3C_HSOTG_REG(0xB00 + ((_a) * 0x20)) +#define DCFG HSOTG_REG(0x800) + +#define DCFG_EPMisCnt_MASK (0x1f << 18) +#define DCFG_EPMisCnt_SHIFT (18) +#define DCFG_EPMisCnt_LIMIT (0x1f) +#define DCFG_EPMisCnt(_x) ((_x) << 18) + +#define DCFG_PerFrInt_MASK (0x3 << 11) +#define DCFG_PerFrInt_SHIFT (11) +#define DCFG_PerFrInt_LIMIT (0x3) +#define DCFG_PerFrInt(_x) ((_x) << 11) + +#define DCFG_DevAddr_MASK (0x7f << 4) +#define DCFG_DevAddr_SHIFT (4) +#define DCFG_DevAddr_LIMIT (0x7f) +#define DCFG_DevAddr(_x) ((_x) << 4) + +#define DCFG_NZStsOUTHShk (1 << 2) + +#define DCFG_DevSpd_MASK (0x3 << 0) +#define DCFG_DevSpd_SHIFT (0) +#define DCFG_DevSpd_HS (0x0 << 0) +#define DCFG_DevSpd_FS (0x1 << 0) +#define DCFG_DevSpd_LS (0x2 << 0) +#define DCFG_DevSpd_FS48 (0x3 << 0) + +#define DCTL HSOTG_REG(0x804) + +#define DCTL_PWROnPrgDone (1 << 11) +#define DCTL_CGOUTNak (1 << 10) +#define DCTL_SGOUTNak (1 << 9) +#define DCTL_CGNPInNAK (1 << 8) +#define DCTL_SGNPInNAK (1 << 7) +#define DCTL_TstCtl_MASK (0x7 << 4) +#define DCTL_TstCtl_SHIFT (4) +#define DCTL_GOUTNakSts (1 << 3) +#define DCTL_GNPINNakSts (1 << 2) +#define DCTL_SftDiscon (1 << 1) +#define DCTL_RmtWkUpSig (1 << 0) + +#define DSTS HSOTG_REG(0x808) + +#define DSTS_SOFFN_MASK (0x3fff << 8) +#define DSTS_SOFFN_SHIFT (8) +#define DSTS_SOFFN_LIMIT (0x3fff) +#define DSTS_SOFFN(_x) ((_x) << 8) +#define DSTS_ErraticErr (1 << 3) +#define DSTS_EnumSpd_MASK (0x3 << 1) +#define DSTS_EnumSpd_SHIFT (1) +#define DSTS_EnumSpd_HS (0x0 << 1) +#define DSTS_EnumSpd_FS (0x1 << 1) +#define DSTS_EnumSpd_LS (0x2 << 1) +#define DSTS_EnumSpd_FS48 (0x3 << 1) + +#define DSTS_SuspSts (1 << 0) + +#define DIEPMSK HSOTG_REG(0x810) + +#define DIEPMSK_TxFIFOEmpty (1 << 7) +#define DIEPMSK_INEPNakEffMsk (1 << 6) +#define DIEPMSK_INTknEPMisMsk (1 << 5) +#define DIEPMSK_INTknTXFEmpMsk (1 << 4) +#define DIEPMSK_TimeOUTMsk (1 << 3) +#define DIEPMSK_AHBErrMsk (1 << 2) +#define DIEPMSK_EPDisbldMsk (1 << 1) +#define DIEPMSK_XferComplMsk (1 << 0) + +#define DOEPMSK HSOTG_REG(0x814) + +#define DOEPMSK_Back2BackSetup (1 << 6) +#define DOEPMSK_OUTTknEPdisMsk (1 << 4) +#define DOEPMSK_SetupMsk (1 << 3) +#define DOEPMSK_AHBErrMsk (1 << 2) +#define DOEPMSK_EPDisbldMsk (1 << 1) +#define DOEPMSK_XferComplMsk (1 << 0) + +#define DAINT HSOTG_REG(0x818) +#define DAINTMSK HSOTG_REG(0x81C) + +#define DAINT_OutEP_SHIFT (16) +#define DAINT_OutEP(x) (1 << ((x) + 16)) +#define DAINT_InEP(x) (1 << (x)) + +#define DTKNQR1 HSOTG_REG(0x820) +#define DTKNQR2 HSOTG_REG(0x824) +#define DTKNQR3 HSOTG_REG(0x830) +#define DTKNQR4 HSOTG_REG(0x834) + +#define DVBUSDIS HSOTG_REG(0x828) +#define DVBUSPULSE HSOTG_REG(0x82C) + +#define DIEPCTL0 HSOTG_REG(0x900) +#define DOEPCTL0 HSOTG_REG(0xB00) +#define DIEPCTL(_a) HSOTG_REG(0x900 + ((_a) * 0x20)) +#define DOEPCTL(_a) HSOTG_REG(0xB00 + ((_a) * 0x20)) /* EP0 specialness: * bits[29..28] - reserved (no SetD0PID, SetD1PID) * bits[25..22] - should always be zero, this isn't a periodic endpoint * bits[10..0] - MPS setting differenct for EP0 -*/ -#define S3C_D0EPCTL_MPS_MASK (0x3 << 0) -#define S3C_D0EPCTL_MPS_SHIFT (0) -#define S3C_D0EPCTL_MPS_64 (0x0 << 0) -#define S3C_D0EPCTL_MPS_32 (0x1 << 0) -#define S3C_D0EPCTL_MPS_16 (0x2 << 0) -#define S3C_D0EPCTL_MPS_8 (0x3 << 0) - -#define S3C_DxEPCTL_EPEna (1 << 31) -#define S3C_DxEPCTL_EPDis (1 << 30) -#define S3C_DxEPCTL_SetD1PID (1 << 29) -#define S3C_DxEPCTL_SetOddFr (1 << 29) -#define S3C_DxEPCTL_SetD0PID (1 << 28) -#define S3C_DxEPCTL_SetEvenFr (1 << 28) -#define S3C_DxEPCTL_SNAK (1 << 27) -#define S3C_DxEPCTL_CNAK (1 << 26) -#define S3C_DxEPCTL_TxFNum_MASK (0xf << 22) -#define S3C_DxEPCTL_TxFNum_SHIFT (22) -#define S3C_DxEPCTL_TxFNum_LIMIT (0xf) -#define S3C_DxEPCTL_TxFNum(_x) ((_x) << 22) - -#define S3C_DxEPCTL_Stall (1 << 21) -#define S3C_DxEPCTL_Snp (1 << 20) -#define S3C_DxEPCTL_EPType_MASK (0x3 << 18) -#define S3C_DxEPCTL_EPType_SHIFT (18) -#define S3C_DxEPCTL_EPType_Control (0x0 << 18) -#define S3C_DxEPCTL_EPType_Iso (0x1 << 18) -#define S3C_DxEPCTL_EPType_Bulk (0x2 << 18) -#define S3C_DxEPCTL_EPType_Intterupt (0x3 << 18) - -#define S3C_DxEPCTL_NAKsts (1 << 17) -#define S3C_DxEPCTL_DPID (1 << 16) -#define S3C_DxEPCTL_EOFrNum (1 << 16) -#define S3C_DxEPCTL_USBActEp (1 << 15) -#define S3C_DxEPCTL_NextEp_MASK (0xf << 11) -#define S3C_DxEPCTL_NextEp_SHIFT (11) -#define S3C_DxEPCTL_NextEp_LIMIT (0xf) -#define S3C_DxEPCTL_NextEp(_x) ((_x) << 11) - -#define S3C_DxEPCTL_MPS_MASK (0x7ff << 0) -#define S3C_DxEPCTL_MPS_SHIFT (0) -#define S3C_DxEPCTL_MPS_LIMIT (0x7ff) -#define S3C_DxEPCTL_MPS(_x) ((_x) << 0) - -#define S3C_DIEPINT(_a) S3C_HSOTG_REG(0x908 + ((_a) * 0x20)) -#define S3C_DOEPINT(_a) S3C_HSOTG_REG(0xB08 + ((_a) * 0x20)) - -#define S3C_DxEPINT_INEPNakEff (1 << 6) -#define S3C_DxEPINT_Back2BackSetup (1 << 6) -#define S3C_DxEPINT_INTknEPMis (1 << 5) -#define S3C_DxEPINT_INTknTXFEmp (1 << 4) -#define S3C_DxEPINT_OUTTknEPdis (1 << 4) -#define S3C_DxEPINT_Timeout (1 << 3) -#define S3C_DxEPINT_Setup (1 << 3) -#define S3C_DxEPINT_AHBErr (1 << 2) -#define S3C_DxEPINT_EPDisbld (1 << 1) -#define S3C_DxEPINT_XferCompl (1 << 0) - -#define S3C_DIEPTSIZ0 S3C_HSOTG_REG(0x910) - -#define S3C_DIEPTSIZ0_PktCnt_MASK (0x3 << 19) -#define S3C_DIEPTSIZ0_PktCnt_SHIFT (19) -#define S3C_DIEPTSIZ0_PktCnt_LIMIT (0x3) -#define S3C_DIEPTSIZ0_PktCnt(_x) ((_x) << 19) - -#define S3C_DIEPTSIZ0_XferSize_MASK (0x7f << 0) -#define S3C_DIEPTSIZ0_XferSize_SHIFT (0) -#define S3C_DIEPTSIZ0_XferSize_LIMIT (0x7f) -#define S3C_DIEPTSIZ0_XferSize(_x) ((_x) << 0) - - -#define DOEPTSIZ0 S3C_HSOTG_REG(0xB10) -#define S3C_DOEPTSIZ0_SUPCnt_MASK (0x3 << 29) -#define S3C_DOEPTSIZ0_SUPCnt_SHIFT (29) -#define S3C_DOEPTSIZ0_SUPCnt_LIMIT (0x3) -#define S3C_DOEPTSIZ0_SUPCnt(_x) ((_x) << 29) - -#define S3C_DOEPTSIZ0_PktCnt (1 << 19) -#define S3C_DOEPTSIZ0_XferSize_MASK (0x7f << 0) -#define S3C_DOEPTSIZ0_XferSize_SHIFT (0) - -#define S3C_DIEPTSIZ(_a) S3C_HSOTG_REG(0x910 + ((_a) * 0x20)) -#define S3C_DOEPTSIZ(_a) S3C_HSOTG_REG(0xB10 + ((_a) * 0x20)) - -#define S3C_DxEPTSIZ_MC_MASK (0x3 << 29) -#define S3C_DxEPTSIZ_MC_SHIFT (29) -#define S3C_DxEPTSIZ_MC_LIMIT (0x3) -#define S3C_DxEPTSIZ_MC(_x) ((_x) << 29) - -#define S3C_DxEPTSIZ_PktCnt_MASK (0x3ff << 19) -#define S3C_DxEPTSIZ_PktCnt_SHIFT (19) -#define S3C_DxEPTSIZ_PktCnt_GET(_v) (((_v) >> 19) & 0x3ff) -#define S3C_DxEPTSIZ_PktCnt_LIMIT (0x3ff) -#define S3C_DxEPTSIZ_PktCnt(_x) ((_x) << 19) - -#define S3C_DxEPTSIZ_XferSize_MASK (0x7ffff << 0) -#define S3C_DxEPTSIZ_XferSize_SHIFT (0) -#define S3C_DxEPTSIZ_XferSize_GET(_v) (((_v) >> 0) & 0x7ffff) -#define S3C_DxEPTSIZ_XferSize_LIMIT (0x7ffff) -#define S3C_DxEPTSIZ_XferSize(_x) ((_x) << 0) - - -#define S3C_DIEPDMA(_a) S3C_HSOTG_REG(0x914 + ((_a) * 0x20)) -#define S3C_DOEPDMA(_a) S3C_HSOTG_REG(0xB14 + ((_a) * 0x20)) -#define S3C_DTXFSTS(_a) S3C_HSOTG_REG(0x918 + ((_a) * 0x20)) - -#define S3C_EPFIFO(_a) S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000)) - -#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */ + */ +#define D0EPCTL_MPS_MASK (0x3 << 0) +#define D0EPCTL_MPS_SHIFT (0) +#define D0EPCTL_MPS_64 (0x0 << 0) +#define D0EPCTL_MPS_32 (0x1 << 0) +#define D0EPCTL_MPS_16 (0x2 << 0) +#define D0EPCTL_MPS_8 (0x3 << 0) + +#define DxEPCTL_EPEna (1 << 31) +#define DxEPCTL_EPDis (1 << 30) +#define DxEPCTL_SetD1PID (1 << 29) +#define DxEPCTL_SetOddFr (1 << 29) +#define DxEPCTL_SetD0PID (1 << 28) +#define DxEPCTL_SetEvenFr (1 << 28) +#define DxEPCTL_SNAK (1 << 27) +#define DxEPCTL_CNAK (1 << 26) +#define DxEPCTL_TxFNum_MASK (0xf << 22) +#define DxEPCTL_TxFNum_SHIFT (22) +#define DxEPCTL_TxFNum_LIMIT (0xf) +#define DxEPCTL_TxFNum(_x) ((_x) << 22) + +#define DxEPCTL_Stall (1 << 21) +#define DxEPCTL_Snp (1 << 20) +#define DxEPCTL_EPType_MASK (0x3 << 18) +#define DxEPCTL_EPType_SHIFT (18) +#define DxEPCTL_EPType_Control (0x0 << 18) +#define DxEPCTL_EPType_Iso (0x1 << 18) +#define DxEPCTL_EPType_Bulk (0x2 << 18) +#define DxEPCTL_EPType_Intterupt (0x3 << 18) + +#define DxEPCTL_NAKsts (1 << 17) +#define DxEPCTL_DPID (1 << 16) +#define DxEPCTL_EOFrNum (1 << 16) +#define DxEPCTL_USBActEp (1 << 15) +#define DxEPCTL_NextEp_MASK (0xf << 11) +#define DxEPCTL_NextEp_SHIFT (11) +#define DxEPCTL_NextEp_LIMIT (0xf) +#define DxEPCTL_NextEp(_x) ((_x) << 11) + +#define DxEPCTL_MPS_MASK (0x7ff << 0) +#define DxEPCTL_MPS_SHIFT (0) +#define DxEPCTL_MPS_LIMIT (0x7ff) +#define DxEPCTL_MPS(_x) ((_x) << 0) + +#define DIEPINT(_a) HSOTG_REG(0x908 + ((_a) * 0x20)) +#define DOEPINT(_a) HSOTG_REG(0xB08 + ((_a) * 0x20)) + +#define DxEPINT_INEPNakEff (1 << 6) +#define DxEPINT_Back2BackSetup (1 << 6) +#define DxEPINT_INTknEPMis (1 << 5) +#define DxEPINT_INTknTXFEmp (1 << 4) +#define DxEPINT_OUTTknEPdis (1 << 4) +#define DxEPINT_Timeout (1 << 3) +#define DxEPINT_Setup (1 << 3) +#define DxEPINT_AHBErr (1 << 2) +#define DxEPINT_EPDisbld (1 << 1) +#define DxEPINT_XferCompl (1 << 0) + +#define DIEPTSIZ0 HSOTG_REG(0x910) + +#define DIEPTSIZ0_PktCnt_MASK (0x3 << 19) +#define DIEPTSIZ0_PktCnt_SHIFT (19) +#define DIEPTSIZ0_PktCnt_LIMIT (0x3) +#define DIEPTSIZ0_PktCnt(_x) ((_x) << 19) + +#define DIEPTSIZ0_XferSize_MASK (0x7f << 0) +#define DIEPTSIZ0_XferSize_SHIFT (0) +#define DIEPTSIZ0_XferSize_LIMIT (0x7f) +#define DIEPTSIZ0_XferSize(_x) ((_x) << 0) + +#define DOEPTSIZ0 HSOTG_REG(0xB10) +#define DOEPTSIZ0_SUPCnt_MASK (0x3 << 29) +#define DOEPTSIZ0_SUPCnt_SHIFT (29) +#define DOEPTSIZ0_SUPCnt_LIMIT (0x3) +#define DOEPTSIZ0_SUPCnt(_x) ((_x) << 29) + +#define DOEPTSIZ0_PktCnt (1 << 19) +#define DOEPTSIZ0_XferSize_MASK (0x7f << 0) +#define DOEPTSIZ0_XferSize_SHIFT (0) + +#define DIEPTSIZ(_a) HSOTG_REG(0x910 + ((_a) * 0x20)) +#define DOEPTSIZ(_a) HSOTG_REG(0xB10 + ((_a) * 0x20)) + +#define DxEPTSIZ_MC_MASK (0x3 << 29) +#define DxEPTSIZ_MC_SHIFT (29) +#define DxEPTSIZ_MC_LIMIT (0x3) +#define DxEPTSIZ_MC(_x) ((_x) << 29) + +#define DxEPTSIZ_PktCnt_MASK (0x3ff << 19) +#define DxEPTSIZ_PktCnt_SHIFT (19) +#define DxEPTSIZ_PktCnt_GET(_v) (((_v) >> 19) & 0x3ff) +#define DxEPTSIZ_PktCnt_LIMIT (0x3ff) +#define DxEPTSIZ_PktCnt(_x) ((_x) << 19) + +#define DxEPTSIZ_XferSize_MASK (0x7ffff << 0) +#define DxEPTSIZ_XferSize_SHIFT (0) +#define DxEPTSIZ_XferSize_GET(_v) (((_v) >> 0) & 0x7ffff) +#define DxEPTSIZ_XferSize_LIMIT (0x7ffff) +#define DxEPTSIZ_XferSize(_x) ((_x) << 0) + +#define DIEPDMA(_a) HSOTG_REG(0x914 + ((_a) * 0x20)) +#define DOEPDMA(_a) HSOTG_REG(0xB14 + ((_a) * 0x20)) +#define DTXFSTS(_a) HSOTG_REG(0x918 + ((_a) * 0x20)) + +#define EPFIFO(_a) HSOTG_REG(0x1000 + ((_a) * 0x1000)) + +#endif /* __REGS_USB_HSOTG_H */ -- cgit v0.10.2 From 04b4a0fce530eab728e27e24b5a8d6192c6f70d9 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:15 +0200 Subject: usb:hsotg:samsung: Use clk_prepare_enable and clk_disable_unprepare This commit adjust the s3c-hsotg to new clock API. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 34599df..1cac0be 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -3547,7 +3547,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) /* reset the system */ - clk_enable(hsotg->clk); + clk_prepare_enable(hsotg->clk); /* regulators */ @@ -3645,7 +3645,7 @@ err_supplies: regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); - clk_disable(hsotg->clk); + clk_disable_unprepare(hsotg->clk); clk_put(hsotg->clk); err_regs: @@ -3687,7 +3687,7 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) s3c_hsotg_phy_disable(hsotg); regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); - clk_disable(hsotg->clk); + clk_disable_unprepare(hsotg->clk); clk_put(hsotg->clk); device_unregister(&hsotg->gadget.dev); -- cgit v0.10.2 From 1d144c6732f6badd4be7a1383a4ae2adcc3f9386 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:17:16 +0200 Subject: usb:hsotg:samsung: err_irq: support for probe function Missing handler for freeing requested IRQ added. Moreover clk_ calls has been reorganized. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 1cac0be..5061a2f 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -3558,7 +3558,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) hsotg->supplies); if (ret) { dev_err(dev, "failed to request supplies: %d\n", ret); - goto err_supplies; + goto err_irq; } ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), @@ -3637,17 +3637,13 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) return 0; - err_ep_mem: +err_ep_mem: kfree(eps); - err_supplies: s3c_hsotg_phy_disable(hsotg); - regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); - - clk_disable_unprepare(hsotg->clk); - clk_put(hsotg->clk); - +err_irq: + free_irq(hsotg->irq, hsotg); err_regs: iounmap(hsotg->regs); @@ -3655,6 +3651,7 @@ err_regs_res: release_resource(hsotg->regs_res); kfree(hsotg->regs_res); err_clk: + clk_disable_unprepare(hsotg->clk); clk_put(hsotg->clk); err_mem: kfree(hsotg); -- cgit v0.10.2 From a852d78e4e24f2200fa1764ca3366b4fa4fd072a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:23:04 -0700 Subject: USB: input: iforce: fix up dev_* messages Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. Cc: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c index 0d8f53b..08f98f2 100644 --- a/drivers/input/joystick/iforce/iforce-packets.c +++ b/drivers/input/joystick/iforce/iforce-packets.c @@ -257,7 +257,7 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet) status = usb_submit_urb(iforce->ctrl, GFP_ATOMIC); if (status) { - dev_err(&iforce->dev->dev, + dev_err(&iforce->intf->dev, "usb_submit_urb failed %d\n", status); return -1; } @@ -266,7 +266,7 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet) iforce->ctrl->status != -EINPROGRESS, HZ); if (iforce->ctrl->status) { - dev_dbg(&iforce->dev->dev, + dev_dbg(&iforce->intf->dev, "iforce->ctrl->status = %d\n", iforce->ctrl->status); usb_unlink_urb(iforce->ctrl); diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 15e8d65..d96aa27 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -64,7 +64,7 @@ void iforce_usb_xmit(struct iforce *iforce) if ( (n=usb_submit_urb(iforce->out, GFP_ATOMIC)) ) { clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); - dev_warn(&iforce->dev->dev, "usb_submit_urb failed %d\n", n); + dev_warn(&iforce->intf->dev, "usb_submit_urb failed %d\n", n); } /* The IFORCE_XMIT_RUNNING bit is not cleared here. That's intended. @@ -76,7 +76,7 @@ void iforce_usb_xmit(struct iforce *iforce) static void iforce_usb_irq(struct urb *urb) { struct iforce *iforce = urb->context; - struct device *dev = &iforce->dev->dev; + struct device *dev = &iforce->intf->dev; int status; switch (urb->status) { @@ -112,7 +112,7 @@ static void iforce_usb_out(struct urb *urb) if (urb->status) { clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); - dev_dbg(&iforce->dev->dev, "urb->status %d, exiting\n", + dev_dbg(&iforce->intf->dev, "urb->status %d, exiting\n", urb->status); return; } @@ -158,6 +158,7 @@ static int iforce_usb_probe(struct usb_interface *intf, iforce->bus = IFORCE_USB; iforce->usbdev = dev; + iforce->intf = intf; iforce->cr.bRequestType = USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_INTERFACE; iforce->cr.wIndex = 0; diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h index 9f494b7..b1d7d9b 100644 --- a/drivers/input/joystick/iforce/iforce.h +++ b/drivers/input/joystick/iforce/iforce.h @@ -115,6 +115,7 @@ struct iforce { #endif #ifdef CONFIG_JOYSTICK_IFORCE_USB struct usb_device *usbdev; /* USB transfer */ + struct usb_interface *intf; struct urb *irq, *out, *ctrl; struct usb_ctrlrequest cr; #endif -- cgit v0.10.2 From 8818e4190f0e04ad20a30e7488dcdd3029b4b96d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:32:53 -0700 Subject: USB: input: xpad.c: fix up dev_* messages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov CC: "Magnus Hörlin" CC: Rusty Russell CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 2e106b0..ee16fb6 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -252,6 +252,7 @@ MODULE_DEVICE_TABLE (usb, xpad_table); struct usb_xpad { struct input_dev *dev; /* input device interface */ struct usb_device *udev; /* usb device */ + struct usb_interface *intf; /* usb interface */ int pad_present; @@ -457,7 +458,7 @@ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned cha static void xpad_irq_in(struct urb *urb) { struct usb_xpad *xpad = urb->context; - struct device *dev = &xpad->dev->dev; + struct device *dev = &xpad->intf->dev; int retval, status; status = urb->status; @@ -500,7 +501,7 @@ exit: static void xpad_bulk_out(struct urb *urb) { struct usb_xpad *xpad = urb->context; - struct device *dev = &xpad->dev->dev; + struct device *dev = &xpad->intf->dev; switch (urb->status) { case 0: @@ -523,7 +524,7 @@ static void xpad_bulk_out(struct urb *urb) static void xpad_irq_out(struct urb *urb) { struct usb_xpad *xpad = urb->context; - struct device *dev = &xpad->dev->dev; + struct device *dev = &xpad->intf->dev; int retval, status; status = urb->status; @@ -855,6 +856,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id } xpad->udev = udev; + xpad->intf = intf; xpad->mapping = xpad_device[i].mapping; xpad->xtype = xpad_device[i].xtype; -- cgit v0.10.2 From ab242a73a109c227d6ed0fcccab5dd2d9e220b07 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:32:55 -0700 Subject: USB: input: cm109.c: fix up dev_* messages Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov CC: Axel Lin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index 9e76ab1..082684e 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -327,7 +327,7 @@ static void cm109_submit_buzz_toggle(struct cm109_dev *dev) error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); if (error) - dev_err(&dev->idev->dev, + dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", __func__, error); } @@ -341,7 +341,7 @@ static void cm109_urb_irq_callback(struct urb *urb) const int status = urb->status; int error; - dev_dbg(&urb->dev->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n", + dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n", dev->irq_data->byte[0], dev->irq_data->byte[1], dev->irq_data->byte[2], @@ -351,7 +351,7 @@ static void cm109_urb_irq_callback(struct urb *urb) if (status) { if (status == -ESHUTDOWN) return; - dev_err(&dev->idev->dev, "%s: urb status %d\n", __func__, status); + dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status); } /* Special keys */ @@ -398,7 +398,7 @@ static void cm109_urb_irq_callback(struct urb *urb) error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); if (error) - dev_err(&dev->idev->dev, + dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", __func__, error); } @@ -412,14 +412,14 @@ static void cm109_urb_ctl_callback(struct urb *urb) const int status = urb->status; int error; - dev_dbg(&urb->dev->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n", + dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n", dev->ctl_data->byte[0], dev->ctl_data->byte[1], dev->ctl_data->byte[2], dev->ctl_data->byte[3]); if (status) - dev_err(&dev->idev->dev, "%s: urb status %d\n", __func__, status); + dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status); spin_lock(&dev->ctl_submit_lock); @@ -436,7 +436,7 @@ static void cm109_urb_ctl_callback(struct urb *urb) dev->irq_urb_pending = 1; error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC); if (error) - dev_err(&dev->idev->dev, + dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_irq) failed %d\n", __func__, error); } @@ -480,7 +480,7 @@ static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on) dev->ctl_data, USB_PKT_LEN, USB_CTRL_SET_TIMEOUT); if (error < 0 && error != -EINTR) - dev_err(&dev->idev->dev, "%s: usb_control_msg() failed %d\n", + dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n", __func__, error); } @@ -542,7 +542,7 @@ static int cm109_input_open(struct input_dev *idev) error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL); if (error) - dev_err(&idev->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", + dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", __func__, error); else dev->open = 1; @@ -579,7 +579,7 @@ static int cm109_input_ev(struct input_dev *idev, unsigned int type, { struct cm109_dev *dev = input_get_drvdata(idev); - dev_dbg(&dev->udev->dev, + dev_dbg(&dev->intf->dev, "input_ev: type=%u code=%u value=%d\n", type, code, value); if (type != EV_SND) -- cgit v0.10.2 From 419b1a11fbe7889f8c3e62b0ef33e8b393279563 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:32:58 -0700 Subject: USB: input: keyspan_remote.c: fix up dev_* messages Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c index 7f017d4..290fa5f 100644 --- a/drivers/input/misc/keyspan_remote.c +++ b/drivers/input/misc/keyspan_remote.c @@ -157,7 +157,7 @@ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) * though so it's not too big a deal */ if (dev->data.pos >= dev->data.len) { - dev_dbg(&dev->udev->dev, + dev_dbg(&dev->interface->dev, "%s - Error ran out of data. pos: %d, len: %d\n", __func__, dev->data.pos, dev->data.len); return -1; @@ -267,7 +267,7 @@ static void keyspan_check_data(struct usb_keyspan *remote) remote->data.tester = remote->data.tester >> 6; remote->data.bits_left -= 6; } else { - dev_err(&remote->input->dev, + dev_err(&remote->interface->dev, "%s - Unknown sequence found in system data.\n", __func__); remote->stage = 0; @@ -288,7 +288,7 @@ static void keyspan_check_data(struct usb_keyspan *remote) remote->data.tester = remote->data.tester >> 6; remote->data.bits_left -= 6; } else { - dev_err(&remote->input->dev, + dev_err(&remote->interface->dev, "%s - Unknown sequence found in button data.\n", __func__); remote->stage = 0; @@ -306,7 +306,7 @@ static void keyspan_check_data(struct usb_keyspan *remote) remote->data.tester = remote->data.tester >> 6; remote->data.bits_left -= 6; } else { - dev_err(&remote->input->dev, + dev_err(&remote->interface->dev, "%s - Error in message, invalid toggle.\n", __func__); remote->stage = 0; @@ -318,11 +318,11 @@ static void keyspan_check_data(struct usb_keyspan *remote) remote->data.tester = remote->data.tester >> 5; remote->data.bits_left -= 5; } else { - dev_err(&remote->input->dev, + dev_err(&remote->interface->dev, "Bad message received, no stop bit found.\n"); } - dev_dbg(&remote->udev->dev, + dev_dbg(&remote->interface->dev, "%s found valid message: system: %d, button: %d, toggle: %d\n", __func__, message.system, message.button, message.toggle); @@ -404,7 +404,7 @@ static void keyspan_irq_recv(struct urb *urb) resubmit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&dev->input->dev, + dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result: %d\n", __func__, retval); } -- cgit v0.10.2 From c25e647836cd53f2da7ceff6fabf2603b4362212 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:33:00 -0700 Subject: USB: input: powermate.c: fix up dev_* messages Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c index d16717e..49c0c3e 100644 --- a/drivers/input/misc/powermate.c +++ b/drivers/input/misc/powermate.c @@ -65,6 +65,7 @@ struct powermate_device { struct urb *irq, *config; struct usb_ctrlrequest *configcr; struct usb_device *udev; + struct usb_interface *intf; struct input_dev *input; spinlock_t lock; int static_brightness; @@ -85,7 +86,7 @@ static void powermate_config_complete(struct urb *urb); static void powermate_irq(struct urb *urb) { struct powermate_device *pm = urb->context; - struct device *dev = &pm->input->dev; + struct device *dev = &pm->intf->dev; int retval; switch (urb->status) { @@ -333,6 +334,7 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i goto fail3; pm->udev = udev; + pm->intf = intf; pm->input = input_dev; usb_make_path(udev, pm->phys, sizeof(pm->phys)); -- cgit v0.10.2 From 73e66ceada0b51279ffd4a6f5bffe79d7168d4e8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:33:01 -0700 Subject: USB: input: yealink.c: fix up dev_* messages Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Henk Vergonet CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c index 37b126c..285a5bd 100644 --- a/drivers/input/misc/yealink.c +++ b/drivers/input/misc/yealink.c @@ -101,6 +101,7 @@ static const struct lcd_segment_map { struct yealink_dev { struct input_dev *idev; /* input device */ struct usb_device *udev; /* usb device */ + struct usb_interface *intf; /* usb interface */ /* irq input channel */ struct yld_ctl_packet *irq_data; @@ -428,7 +429,7 @@ static void urb_irq_callback(struct urb *urb) int ret, status = urb->status; if (status) - dev_err(&yld->idev->dev, "%s - urb status %d\n", + dev_err(&yld->intf->dev, "%s - urb status %d\n", __func__, status); switch (yld->irq_data->cmd) { @@ -438,14 +439,14 @@ static void urb_irq_callback(struct urb *urb) break; case CMD_SCANCODE: - dev_dbg(&yld->idev->dev, "get scancode %x\n", + dev_dbg(&yld->intf->dev, "get scancode %x\n", yld->irq_data->data[0]); report_key(yld, map_p1k_to_key(yld->irq_data->data[0])); break; default: - dev_err(&yld->idev->dev, "unexpected response %x\n", + dev_err(&yld->intf->dev, "unexpected response %x\n", yld->irq_data->cmd); } @@ -454,7 +455,7 @@ static void urb_irq_callback(struct urb *urb) if (!yld->shutdown) { ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC); if (ret && ret != -EPERM) - dev_err(&yld->idev->dev, + dev_err(&yld->intf->dev, "%s - usb_submit_urb failed %d\n", __func__, ret); } @@ -466,7 +467,7 @@ static void urb_ctl_callback(struct urb *urb) int ret = 0, status = urb->status; if (status) - dev_err(&yld->idev->dev, "%s - urb status %d\n", + dev_err(&yld->intf->dev, "%s - urb status %d\n", __func__, status); switch (yld->ctl_data->cmd) { @@ -485,7 +486,7 @@ static void urb_ctl_callback(struct urb *urb) } if (ret && ret != -EPERM) - dev_err(&yld->idev->dev, "%s - usb_submit_urb failed %d\n", + dev_err(&yld->intf->dev, "%s - usb_submit_urb failed %d\n", __func__, ret); } @@ -518,7 +519,7 @@ static int input_open(struct input_dev *dev) struct yealink_dev *yld = input_get_drvdata(dev); int i, ret; - dev_dbg(&yld->idev->dev, "%s\n", __func__); + dev_dbg(&yld->intf->dev, "%s\n", __func__); /* force updates to device */ for (i = 0; imaster); i++) @@ -533,7 +534,7 @@ static int input_open(struct input_dev *dev) yld->ctl_data->size = 10; yld->ctl_data->sum = 0x100-CMD_INIT-10; if ((ret = usb_submit_urb(yld->urb_ctl, GFP_KERNEL)) != 0) { - dev_dbg(&yld->idev->dev, + dev_dbg(&yld->intf->dev, "%s - usb_submit_urb failed with result %d\n", __func__, ret); return ret; @@ -884,6 +885,7 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) return -ENOMEM; yld->udev = udev; + yld->intf = intf; yld->idev = input_dev = input_allocate_device(); if (!input_dev) -- cgit v0.10.2 From 2d744b09199d2481c99563fdcf7f1c60f87fd965 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:33:01 -0700 Subject: USB: input: appletouch.c: fix up dev_* messages Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Alessandro Rubini CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index d0a590f..38268e8 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -195,6 +195,7 @@ enum atp_status_bits { struct atp { char phys[64]; struct usb_device *udev; /* usb device */ + struct usb_interface *intf; /* usb interface */ struct urb *urb; /* usb request block */ u8 *data; /* transferred data */ struct input_dev *input; /* input dev */ @@ -263,7 +264,7 @@ static int atp_geyser_init(struct atp *dev) data = kmalloc(8, GFP_KERNEL); if (!data) { - dev_err(&dev->input->dev, "Out of memory\n"); + dev_err(&dev->intf->dev, "Out of memory\n"); return -ENOMEM; } @@ -278,7 +279,7 @@ static int atp_geyser_init(struct atp *dev) for (i = 0; i < 8; i++) dprintk("appletouch[%d]: %d\n", i, data[i]); - dev_err(&dev->input->dev, "Failed to read mode from device.\n"); + dev_err(&dev->intf->dev, "Failed to read mode from device.\n"); ret = -EIO; goto out_free; } @@ -297,7 +298,7 @@ static int atp_geyser_init(struct atp *dev) for (i = 0; i < 8; i++) dprintk("appletouch[%d]: %d\n", i, data[i]); - dev_err(&dev->input->dev, "Failed to request geyser raw mode\n"); + dev_err(&dev->intf->dev, "Failed to request geyser raw mode\n"); ret = -EIO; goto out_free; } @@ -321,7 +322,7 @@ static void atp_reinit(struct work_struct *work) retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) - dev_err(&dev->input->dev, + dev_err(&dev->intf->dev, "atp_reinit: usb_submit_urb failed with error %d\n", retval); } @@ -402,6 +403,7 @@ static int atp_status_check(struct urb *urb) { struct atp *dev = urb->context; struct input_dev *idev = dev->input; + struct usb_interface *intf = dev->intf; switch (urb->status) { case 0: @@ -409,7 +411,7 @@ static int atp_status_check(struct urb *urb) break; case -EOVERFLOW: if (!dev->overflow_warned) { - dev_warn(&idev->dev, + dev_warn(&intf->dev, "appletouch: OVERFLOW with data length %d, actual length is %d\n", dev->info->datalen, dev->urb->actual_length); dev->overflow_warned = true; @@ -418,13 +420,13 @@ static int atp_status_check(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* This urb is terminated, clean up */ - dev_dbg(&idev->dev, + dev_dbg(&intf->dev, "atp_complete: urb shutting down with status: %d\n", urb->status); return ATP_URB_STATUS_ERROR_FATAL; default: - dev_dbg(&idev->dev, + dev_dbg(&intf->dev, "atp_complete: nonzero urb status received: %d\n", urb->status); return ATP_URB_STATUS_ERROR; @@ -449,7 +451,7 @@ static void atp_detect_size(struct atp *dev) for (i = dev->info->xsensors; i < ATP_XSENSORS; i++) { if (dev->xy_cur[i]) { - dev_info(&dev->input->dev, + dev_info(&dev->intf->dev, "appletouch: 17\" model detected.\n"); input_set_abs_params(dev->input, ABS_X, 0, @@ -593,7 +595,7 @@ static void atp_complete_geyser_1_2(struct urb *urb) exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) - dev_err(&dev->input->dev, + dev_err(&dev->intf->dev, "atp_complete: usb_submit_urb failed with result %d\n", retval); } @@ -728,7 +730,7 @@ static void atp_complete_geyser_3_4(struct urb *urb) exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) - dev_err(&dev->input->dev, + dev_err(&dev->intf->dev, "atp_complete: usb_submit_urb failed with result %d\n", retval); } @@ -760,7 +762,7 @@ static int atp_handle_geyser(struct atp *dev) if (atp_geyser_init(dev)) return -EIO; - dev_info(&dev->input->dev, "Geyser mode initialized.\n"); + dev_info(&dev->intf->dev, "Geyser mode initialized.\n"); } return 0; @@ -803,6 +805,7 @@ static int atp_probe(struct usb_interface *iface, } dev->udev = udev; + dev->intf = iface; dev->input = input_dev; dev->info = info; dev->overflow_warned = false; @@ -891,7 +894,7 @@ static void atp_disconnect(struct usb_interface *iface) usb_free_urb(dev->urb); kfree(dev); } - printk(KERN_INFO "input: appletouch disconnected\n"); + dev_info(&iface->dev, "input: appletouch disconnected\n"); } static int atp_recover(struct atp *dev) -- cgit v0.10.2 From ab943ca8942c50b7c35c561103efb4622c5bfb85 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:33:02 -0700 Subject: USB: input: bcm5974.c: fix up dev_* messages Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Henrik Rydberg CC: Alessandro Rubini CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index e32928e..2cf681d 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -584,7 +584,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) int retval = 0, size; if (!data) { - dev_err(&dev->input->dev, "out of memory\n"); + dev_err(&dev->intf->dev, "out of memory\n"); retval = -ENOMEM; goto out; } @@ -597,7 +597,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { - dev_err(&dev->input->dev, "could not read from device\n"); + dev_err(&dev->intf->dev, "could not read from device\n"); retval = -EIO; goto out; } @@ -615,7 +615,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { - dev_err(&dev->input->dev, "could not write to device\n"); + dev_err(&dev->intf->dev, "could not write to device\n"); retval = -EIO; goto out; } @@ -631,7 +631,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) static void bcm5974_irq_button(struct urb *urb) { struct bcm5974 *dev = urb->context; - struct input_dev *idev = dev->input; + struct usb_interface *intf = dev->intf; int error; switch (urb->status) { @@ -641,11 +641,11 @@ static void bcm5974_irq_button(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dev_dbg(&idev->dev, "button urb shutting down: %d\n", + dev_dbg(&intf->dev, "button urb shutting down: %d\n", urb->status); return; default: - dev_dbg(&idev->dev, "button urb status: %d\n", urb->status); + dev_dbg(&intf->dev, "button urb status: %d\n", urb->status); goto exit; } @@ -656,13 +656,13 @@ static void bcm5974_irq_button(struct urb *urb) exit: error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC); if (error) - dev_err(&idev->dev, "button urb failed: %d\n", error); + dev_err(&intf->dev, "button urb failed: %d\n", error); } static void bcm5974_irq_trackpad(struct urb *urb) { struct bcm5974 *dev = urb->context; - struct input_dev *idev = dev->input; + struct usb_interface *intf = dev->intf; int error; switch (urb->status) { @@ -672,11 +672,11 @@ static void bcm5974_irq_trackpad(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - dev_dbg(&idev->dev, "trackpad urb shutting down: %d\n", + dev_dbg(&intf->dev, "trackpad urb shutting down: %d\n", urb->status); return; default: - dev_dbg(&idev->dev, "trackpad urb status: %d\n", urb->status); + dev_dbg(&intf->dev, "trackpad urb status: %d\n", urb->status); goto exit; } @@ -691,7 +691,7 @@ static void bcm5974_irq_trackpad(struct urb *urb) exit: error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC); if (error) - dev_err(&idev->dev, "trackpad urb failed: %d\n", error); + dev_err(&intf->dev, "trackpad urb failed: %d\n", error); } /* -- cgit v0.10.2 From 334698d435b4446d796a2059284256b9d28a0d19 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:33:04 -0700 Subject: USB: input: acecad.c: fix up dev_* messages Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c index baa9d4a..e062ec8 100644 --- a/drivers/input/tablet/acecad.c +++ b/drivers/input/tablet/acecad.c @@ -51,6 +51,7 @@ struct usb_acecad { char name[128]; char phys[64]; struct usb_device *usbdev; + struct usb_interface *intf; struct input_dev *input; struct urb *irq; @@ -63,6 +64,7 @@ static void usb_acecad_irq(struct urb *urb) struct usb_acecad *acecad = urb->context; unsigned char *data = acecad->data; struct input_dev *dev = acecad->input; + struct usb_interface *intf = acecad->intf; int prox, status; switch (urb->status) { @@ -73,11 +75,11 @@ static void usb_acecad_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dev_dbg(&dev->dev, "%s - urb shutting down with status: %d\n", + dev_dbg(&intf->dev, "%s - urb shutting down with status: %d\n", __func__, urb->status); return; default: - dev_dbg(&dev->dev, "%s - nonzero urb status received: %d\n", + dev_dbg(&intf->dev, "%s - nonzero urb status received: %d\n", __func__, urb->status); goto resubmit; } @@ -107,7 +109,7 @@ static void usb_acecad_irq(struct urb *urb) resubmit: status = usb_submit_urb(urb, GFP_ATOMIC); if (status) - dev_err(&dev->dev, + dev_err(&intf->dev, "can't resubmit intr, %s-%s/input0, status %d\n", acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status); @@ -172,6 +174,7 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ } acecad->usbdev = dev; + acecad->intf = intf; acecad->input = input_dev; if (dev->manufacturer) -- cgit v0.10.2 From 871ba51c130d4f2e7d33b8c57e834df701357102 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:33:06 -0700 Subject: USB: input: aiptek.c: fix up dev_* messages Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov CC: Jesper Juhl CC: JJ Ding CC: Edwin van Vliet Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index 37dba76..755a39e 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -309,6 +309,7 @@ struct aiptek_settings { struct aiptek { struct input_dev *inputdev; /* input device struct */ struct usb_device *usbdev; /* usb device struct */ + struct usb_interface *intf; /* usb interface struct */ struct urb *urb; /* urb for incoming reports */ dma_addr_t data_dma; /* our dma stuffage */ struct aiptek_features features; /* tablet's array of features */ @@ -435,6 +436,7 @@ static void aiptek_irq(struct urb *urb) struct aiptek *aiptek = urb->context; unsigned char *data = aiptek->data; struct input_dev *inputdev = aiptek->inputdev; + struct usb_interface *intf = aiptek->intf; int jitterable = 0; int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck; @@ -447,14 +449,12 @@ static void aiptek_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* This urb is terminated, clean up */ - dev_dbg(&inputdev->dev, - "%s - urb shutting down with status: %d\n", + dev_dbg(&intf->dev, "%s - urb shutting down with status: %d\n", __func__, urb->status); return; default: - dev_dbg(&inputdev->dev, - "%s - nonzero urb status received: %d\n", + dev_dbg(&intf->dev, "%s - nonzero urb status received: %d\n", __func__, urb->status); goto exit; } @@ -787,7 +787,7 @@ static void aiptek_irq(struct urb *urb) 1 | AIPTEK_REPORT_TOOL_UNKNOWN); input_sync(inputdev); } else { - dev_dbg(&inputdev->dev, "Unknown report %d\n", data[0]); + dev_dbg(&intf->dev, "Unknown report %d\n", data[0]); } /* Jitter may occur when the user presses a button on the stlyus @@ -813,7 +813,7 @@ static void aiptek_irq(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval != 0) { - dev_err(&inputdev->dev, + dev_err(&intf->dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } @@ -915,7 +915,7 @@ aiptek_command(struct aiptek *aiptek, unsigned char command, unsigned char data) if ((ret = aiptek_set_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) { - dev_dbg(&aiptek->inputdev->dev, + dev_dbg(&aiptek->intf->dev, "aiptek_program: failed, tried to send: 0x%02x 0x%02x\n", command, data); } @@ -951,7 +951,7 @@ aiptek_query(struct aiptek *aiptek, unsigned char command, unsigned char data) if ((ret = aiptek_get_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) { - dev_dbg(&aiptek->inputdev->dev, + dev_dbg(&aiptek->intf->dev, "aiptek_query failed: returned 0x%02x 0x%02x 0x%02x\n", buf[0], buf[1], buf[2]); ret = -EIO; @@ -1731,6 +1731,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) aiptek->inputdev = inputdev; aiptek->usbdev = usbdev; + aiptek->intf = intf; aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber; aiptek->inDelay = 0; aiptek->endDelay = 0; -- cgit v0.10.2 From 27c2597d455a24507f1d0be6991a0a84b5c1b035 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:33:09 -0700 Subject: USB: input: gtco.c: fix up dev_* messages Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c index 422b1a2..29e01ab 100644 --- a/drivers/input/tablet/gtco.c +++ b/drivers/input/tablet/gtco.c @@ -106,6 +106,7 @@ struct gtco { struct input_dev *inputdevice; /* input device struct pointer */ struct usb_device *usbdev; /* the usb device for this device */ + struct usb_interface *intf; /* the usb interface for this device */ struct urb *urbinfo; /* urb for incoming reports */ dma_addr_t buf_dma; /* dma addr of the data buffer*/ unsigned char * buffer; /* databuffer for reports */ @@ -200,7 +201,7 @@ struct hid_descriptor static void parse_hid_report_descriptor(struct gtco *device, char * report, int length) { - struct device *ddev = &device->inputdevice->dev; + struct device *ddev = &device->intf->dev; int x, i = 0; /* Tag primitive vars */ @@ -713,7 +714,7 @@ static void gtco_urb_callback(struct urb *urbinfo) * the rest as 0 */ val = device->buffer[5] & MASK_BUTTON; - dev_dbg(&inputdev->dev, + dev_dbg(&device->intf->dev, "======>>>>>>REPORT 1: val 0x%X(%d)\n", val, val); @@ -808,7 +809,7 @@ static void gtco_urb_callback(struct urb *urbinfo) resubmit: rc = usb_submit_urb(urbinfo, GFP_ATOMIC); if (rc != 0) - dev_err(&inputdev->dev, + dev_err(&device->intf->dev, "usb_submit_urb failed rc=0x%x\n", rc); } @@ -849,6 +850,7 @@ static int gtco_probe(struct usb_interface *usbinterface, /* Save interface information */ gtco->usbdev = usb_get_dev(interface_to_usbdev(usbinterface)); + gtco->intf = usbinterface; /* Allocate some data for incoming reports */ gtco->buffer = usb_alloc_coherent(gtco->usbdev, REPORT_MAX_SIZE, -- cgit v0.10.2 From ed2b2f2db2d52098bdda3877367d59984febdd9f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:33:11 -0700 Subject: USB: input: kbtab.c: fix up dev_* messages Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c index a39d176..3fba74b 100644 --- a/drivers/input/tablet/kbtab.c +++ b/drivers/input/tablet/kbtab.c @@ -33,6 +33,7 @@ struct kbtab { dma_addr_t data_dma; struct input_dev *dev; struct usb_device *usbdev; + struct usb_interface *intf; struct urb *irq; char phys[32]; }; @@ -53,11 +54,13 @@ static void kbtab_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dev_dbg(&dev->dev, "%s - urb shutting down with status: %d\n", + dev_dbg(&kbtab->intf->dev, + "%s - urb shutting down with status: %d\n", __func__, urb->status); return; default: - dev_dbg(&dev->dev, "%s - nonzero urb status received: %d\n", + dev_dbg(&kbtab->intf->dev, + "%s - nonzero urb status received: %d\n", __func__, urb->status); goto exit; } @@ -82,7 +85,7 @@ static void kbtab_irq(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&dev->dev, + dev_err(&kbtab->intf->dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } @@ -134,6 +137,7 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i goto fail2; kbtab->usbdev = dev; + kbtab->intf = intf; kbtab->dev = input_dev; usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys)); -- cgit v0.10.2 From 65e78a2062d5e56f906d52c45820d08711d2c2e2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:33:13 -0700 Subject: USB: input: wacom_sys.c: fix up dev_* messages Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov CC: Ping Cheng CC: Chris Bagwell CC: Eduard Hasenleithner Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index ac29a68..79a0509 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -99,7 +99,7 @@ static int wacom_set_report(struct usb_interface *intf, u8 type, u8 id, static void wacom_sys_irq(struct urb *urb) { struct wacom *wacom = urb->context; - struct device *dev = &wacom->wacom_wac.input->dev; + struct device *dev = &wacom->intf->dev; int retval; switch (urb->status) { @@ -820,7 +820,7 @@ static int wacom_initialize_leds(struct wacom *wacom) } if (error) { - dev_err(&wacom->wacom_wac.input->dev, + dev_err(&wacom->intf->dev, "cannot create sysfs group err: %d\n", error); return error; } -- cgit v0.10.2 From 0a5ebc88c74d8029e80a72e57cbebc0b3b4e5d98 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:33:16 -0700 Subject: USB: input: usbtouchscreen.c: fix up dev_* messages Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov CC: Henrik Rydberg CC: Rusty Russell CC: Viresh Kumar CC: Armando Visconti Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 100eded..e32709e 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -269,7 +269,7 @@ static int e2i_init(struct usbtouch_usb *usbtouch) 0x01, 0x02, 0x0000, 0x0081, NULL, 0, USB_CTRL_SET_TIMEOUT); - dev_dbg(&usbtouch->input->dev, + dev_dbg(&usbtouch->interface->dev, "%s - usb_control_msg - E2I_RESET - bytes|err: %d\n", __func__, ret); return ret; @@ -426,7 +426,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch) MTOUCHUSB_RESET, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - dev_dbg(&usbtouch->input->dev, + dev_dbg(&usbtouch->interface->dev, "%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d\n", __func__, ret); if (ret < 0) @@ -438,7 +438,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch) MTOUCHUSB_ASYNC_REPORT, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT); - dev_dbg(&usbtouch->input->dev, + dev_dbg(&usbtouch->interface->dev, "%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d\n", __func__, ret); if (ret >= 0) @@ -740,29 +740,29 @@ static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt) #ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { - struct input_dev *input = dev->input; + struct usb_interface *intf = dev->interface; switch (pkt[0]) { case 0x3A: /* command response */ - dev_dbg(&input->dev, "%s: Command response %d\n", __func__, pkt[1]); + dev_dbg(&intf->dev, "%s: Command response %d\n", __func__, pkt[1]); break; case 0xC0: /* down */ dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); dev->touch = 1; - dev_dbg(&input->dev, "%s: down %d,%d\n", __func__, dev->x, dev->y); + dev_dbg(&intf->dev, "%s: down %d,%d\n", __func__, dev->x, dev->y); return 1; case 0x80: /* up */ dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); dev->touch = 0; - dev_dbg(&input->dev, "%s: up %d,%d\n", __func__, dev->x, dev->y); + dev_dbg(&intf->dev, "%s: up %d,%d\n", __func__, dev->x, dev->y); return 1; default: - dev_dbg(&input->dev, "%s: Unknown return %d\n", __func__, pkt[0]); + dev_dbg(&intf->dev, "%s: Unknown return %d\n", __func__, pkt[0]); break; } @@ -817,7 +817,7 @@ static int nexio_alloc(struct usbtouch_usb *usbtouch) priv->ack = usb_alloc_urb(0, GFP_KERNEL); if (!priv->ack) { - dev_dbg(&usbtouch->input->dev, + dev_dbg(&usbtouch->interface->dev, "%s - usb_alloc_urb failed: usbtouch->ack\n", __func__); goto err_ack_buf; } @@ -1355,7 +1355,7 @@ out_flush_buf: static void usbtouch_irq(struct urb *urb) { struct usbtouch_usb *usbtouch = urb->context; - struct device *dev = &usbtouch->input->dev; + struct device *dev = &usbtouch->interface->dev; int retval; switch (urb->status) { @@ -1388,8 +1388,7 @@ exit: usb_mark_last_busy(interface_to_usbdev(usbtouch->interface)); retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&usbtouch->input->dev, - "%s - usb_submit_urb failed with result: %d\n", + dev_err(dev, "%s - usb_submit_urb failed with result: %d\n", __func__, retval); } @@ -1465,7 +1464,7 @@ static int usbtouch_reset_resume(struct usb_interface *intf) if (usbtouch->type->init) { err = usbtouch->type->init(usbtouch); if (err) { - dev_dbg(&input->dev, + dev_dbg(&intf->dev, "%s - type->init() failed, err: %d\n", __func__, err); return err; @@ -1639,7 +1638,7 @@ static int usbtouch_probe(struct usb_interface *intf, err = usb_submit_urb(usbtouch->irq, GFP_KERNEL); if (err) { usb_autopm_put_interface(intf); - dev_err(&input_dev->dev, + dev_err(&intf->dev, "%s - usb_submit_urb failed with result: %d\n", __func__, err); goto out_unregister_input; @@ -1671,7 +1670,7 @@ static void usbtouch_disconnect(struct usb_interface *intf) if (!usbtouch) return; - dev_dbg(&usbtouch->input->dev, + dev_dbg(&intf->dev, "%s - usbtouch is initialized, cleaning up\n", __func__); usb_set_intfdata(intf, NULL); -- cgit v0.10.2 From 3b923993daaa38f1ae297a79f734c308866dd026 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:35:56 -0700 Subject: USB: input: appletouch: fix up compiler warning My last patch fixing up the dev_* messages caused a compiler warning accidentally for an unused variable. Fix this up, as it was my fault. Cc: Alessandro Rubini Cc: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 38268e8..e42f1fa 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -402,7 +402,6 @@ static inline void atp_report_fingers(struct input_dev *input, int fingers) static int atp_status_check(struct urb *urb) { struct atp *dev = urb->context; - struct input_dev *idev = dev->input; struct usb_interface *intf = dev->intf; switch (urb->status) { -- cgit v0.10.2 From 7275fc4c16ef50e99d3755265a4ae83e3afe63d0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 15:39:11 -0700 Subject: USB: gadget: ci13xx_udc: remove unused err() macro I previously cleaned up the err() call usage in this driver, but it really was calling this macro instead. To remove future confusion, just delete this unused macro now. Ideally, the warn() and info() macros should also be removed, and the "real" dev_warn() and dev_info() calls should be used instead. Reported-by: Paul Gortmaker Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h index 0d31af5..c4cec6a 100644 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -212,7 +212,6 @@ do { \ "[%s] " format "\n", __func__, ## args); \ } while (0) -#define err(format, args...) ci13xxx_printk(KERN_ERR, format, ## args) #define warn(format, args...) ci13xxx_printk(KERN_WARNING, format, ## args) #define info(format, args...) ci13xxx_printk(KERN_INFO, format, ## args) -- cgit v0.10.2 From 2af588d5f093fd8212bfe7151183a535e8e9117b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 16:17:49 -0700 Subject: USB: quatech_usb2.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Rusty Russell CC: Alan Stern CC: Mauro Carvalho Chehab CC: Kautuk Consul Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c index 679b249..7739ada 100644 --- a/drivers/staging/quatech_usb2/quatech_usb2.c +++ b/drivers/staging/quatech_usb2/quatech_usb2.c @@ -415,8 +415,6 @@ static void qt2_release(struct usb_serial *serial) struct quatech2_port *qt_port; int i; - dbg("enterting %s", __func__); - for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; if (!port) @@ -455,8 +453,6 @@ int qt2_open(struct tty_struct *tty, struct usb_serial_port *port) if (port_paranoia_check(port, __func__)) return -ENODEV; - dbg("%s(): port %d", __func__, port->number); - serial = port->serial; /* get the parent device structure */ if (serial_paranoia_check(serial, __func__)) { dbg("usb_serial struct failed sanity check"); @@ -636,7 +632,6 @@ static void qt2_close(struct usb_serial_port *port) __u8 lsr_value = 0; /* value of Line Status Register */ int status; /* result of last USB comms function */ - dbg("%s(): port %d", __func__, port->number); serial = port->serial; /* get the parent device structure */ dev_extra = qt2_get_dev_private(serial); /* get the device private data */ @@ -971,10 +966,7 @@ static void qt2_set_termios(struct tty_struct *tty, int status; __u16 UartNumber; - dbg("%s(): port %d", __func__, port->number); - serial = port->serial; - UartNumber = port->number; if (old_termios && !tty_termios_hw_change(old_termios, tty->termios)) @@ -1096,9 +1088,7 @@ static int qt2_tiocmget(struct tty_struct *tty) if (serial == NULL) return -ENODEV; - dbg("%s(): port %d, tty =0x%p", __func__, port->number, tty); UartNumber = tty->index - serial->minor; - dbg("UartNumber is %d", UartNumber); status = qt2_box_get_register(port->serial, UartNumber, QT2_MODEM_CONTROL_REGISTER, &mcr_value); @@ -1138,7 +1128,6 @@ static int qt2_tiocmset(struct tty_struct *tty, return -ENODEV; UartNumber = tty->index - serial->minor; - dbg("%s(): port %d, UartNumber %d", __func__, port->number, UartNumber); status = qt2_box_get_register(port->serial, UartNumber, QT2_MODEM_CONTROL_REGISTER, &mcr_value); @@ -1198,7 +1187,6 @@ static void qt2_break(struct tty_struct *tty, int break_state) port->number, NULL, 0, 300); exit: mutex_unlock(&port_extra->modelock); - dbg("%s(): exit port %d", __func__, port->number); } /** @@ -1209,7 +1197,6 @@ static void qt2_throttle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; struct quatech2_port *port_extra; /* extra data for this port */ - dbg("%s(): port %d", __func__, port->number); port_extra = qt2_get_port_private(port); if (!serial) { @@ -1255,7 +1242,6 @@ static void qt2_unthrottle(struct tty_struct *tty) port->number); return; } - dbg("%s(): enter port %d", __func__, port->number); dev_extra = qt2_get_dev_private(serial); port_extra = qt2_get_port_private(port); port0 = serial->port[0]; /* get the first port's device structure */ @@ -1285,7 +1271,6 @@ static void qt2_unthrottle(struct tty_struct *tty) } exit: mutex_unlock(&port_extra->modelock); - dbg("%s(): exit port %d", __func__, port->number); return; } @@ -1682,7 +1667,6 @@ __func__); /* cribbed from serqt_usb2 driver, but not sure which work needs * scheduling - port0 or currently active port? */ /* schedule_work(&port->work); */ - dbg("%s() completed", __func__); return; } @@ -1696,7 +1680,7 @@ static void qt2_write_bulk_callback(struct urb *urb) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; struct usb_serial *serial = port->serial; - dbg("%s(): port %d", __func__, port->number); + if (!serial) { dbg("%s(): bad serial pointer, exiting", __func__); return; @@ -1711,7 +1695,6 @@ static void qt2_write_bulk_callback(struct urb *urb) */ /*port_softint((void *) serial); commented in vendor driver */ schedule_work(&port->work); - dbg("%s(): port %d exit", __func__, port->number); return; } -- cgit v0.10.2 From 3cccc292524dfd5d77f38f52116b1da4864e3789 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 May 2012 16:17:51 -0700 Subject: USB: serqt_usb2.c: remove dbg() tracing calls dbg() was used a lot a long time ago to trace code flow. Now that we have ftrace, this isn't needed at all, so remove these calls. CC: Bill Pemberton CC: Rusty Russell CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index 0ec83aa..b547b7b 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -304,8 +304,6 @@ static void qt_write_bulk_callback(struct urb *urb) quatech_port = urb->context; - dbg("%s - port %d\n", __func__, quatech_port->port_num); - tty = tty_port_tty_get(&quatech_port->port->port); if (tty) @@ -351,7 +349,6 @@ static void qt_read_bulk_callback(struct urb *urb) /* index = MINOR(port->tty->device) - serial->minor; */ index = tty->index - serial->minor; - dbg("%s - port %d\n", __func__, port->number); dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding); if (port_paranoia_check(port, __func__) != 0) { @@ -726,8 +723,6 @@ static int qt_startup(struct usb_serial *serial) int i; int status; - dbg("enterting %s", __func__); - /* Now setup per port private data */ for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; @@ -855,8 +850,6 @@ static void qt_release(struct usb_serial *serial) struct quatech_port *qt_port; int i; - dbg("enterting %s", __func__); - for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; if (!port) @@ -882,8 +875,6 @@ static int qt_open(struct tty_struct *tty, if (port_paranoia_check(port, __func__)) return -ENODEV; - dbg("%s - port %d\n", __func__, port->number); - serial = port->serial; if (serial_paranoia_check(serial, __func__)) @@ -1006,8 +997,6 @@ static int qt_chars_in_buffer(struct tty_struct *tty) serial = get_usb_serial(port, __func__); - dbg("%s - port %d\n", __func__, port->number); - if (serial->num_bulk_out) { if (port->write_urb->status == -EINPROGRESS) chars = port->write_urb->transfer_buffer_length; @@ -1054,8 +1043,6 @@ static void qt_close(struct usb_serial_port *port) unsigned int index; status = 0; - dbg("%s - port %d\n", __func__, port->number); - tty = tty_port_tty_get(&port->port); index = tty->index - serial->minor; @@ -1109,8 +1096,6 @@ static int qt_write(struct tty_struct *tty, struct usb_serial_port *port, if (serial == NULL) return -ENODEV; - dbg("%s - port %d\n", __func__, port->number); - if (count == 0) { dbg("%s - write request of 0 bytes\n", __func__); return 0; @@ -1173,8 +1158,6 @@ static int qt_write_room(struct tty_struct *tty) mutex_lock(&qt_port->lock); - dbg("%s - port %d\n", __func__, port->number); - if (serial->num_bulk_out) { if (port->write_urb->status != -EINPROGRESS) retval = port->bulk_out_size; @@ -1241,8 +1224,6 @@ static void qt_set_termios(struct tty_struct *tty, int baud, divisor, remainder; int status; - dbg("%s", __func__); - index = tty->index - port->serial->minor; switch (cflag) { @@ -1365,8 +1346,6 @@ static void qt_break(struct tty_struct *tty, int break_state) mutex_lock(&qt_port->lock); - dbg("%s - port %d\n", __func__, port->number); - result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), QT_BREAK_CONTROL, 0x40, onoff, index, NULL, 0, 300); @@ -1385,8 +1364,6 @@ static inline int qt_real_tiocmget(struct tty_struct *tty, int status; unsigned int index; - dbg("%s - port %d, tty =0x%p\n", __func__, port->number, tty); - index = tty->index - serial->minor; status = BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr); @@ -1426,8 +1403,6 @@ static inline int qt_real_tiocmset(struct tty_struct *tty, int status; unsigned int index; - dbg("%s - port %d\n", __func__, port->number); - index = tty->index - serial->minor; status = BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr); @@ -1461,18 +1436,11 @@ static int qt_tiocmget(struct tty_struct *tty) struct quatech_port *qt_port = qt_get_port_private(port); int retval = -ENODEV; - dbg("In %s\n", __func__); - if (!serial) return -ENODEV; mutex_lock(&qt_port->lock); - - dbg("%s - port %d\n", __func__, port->number); - dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding); - retval = qt_real_tiocmget(tty, port, serial); - mutex_unlock(&qt_port->lock); return retval; } @@ -1486,18 +1454,11 @@ static int qt_tiocmset(struct tty_struct *tty, struct quatech_port *qt_port = qt_get_port_private(port); int retval = -ENODEV; - dbg("In %s\n", __func__); - if (!serial) return -ENODEV; mutex_lock(&qt_port->lock); - - dbg("%s - port %d\n", __func__, port->number); - dbg("%s - qt_port->RxHolding = %d\n", __func__, qt_port->RxHolding); - retval = qt_real_tiocmset(tty, port, serial, set); - mutex_unlock(&qt_port->lock); return retval; } @@ -1508,8 +1469,6 @@ static void qt_throttle(struct tty_struct *tty) struct usb_serial *serial = get_usb_serial(port, __func__); struct quatech_port *qt_port; - dbg("%s - port %d\n", __func__, port->number); - if (!serial) return; @@ -1519,7 +1478,6 @@ static void qt_throttle(struct tty_struct *tty) /* pass on to the driver specific version of this function */ qt_port->RxHolding = 1; - dbg("%s - port->RxHolding = 1\n", __func__); mutex_unlock(&qt_port->lock); return; @@ -1539,8 +1497,6 @@ static void qt_unthrottle(struct tty_struct *tty) mutex_lock(&qt_port->lock); - dbg("%s - port %d\n", __func__, port->number); - if (qt_port->RxHolding == 1) { dbg("%s -qt_port->RxHolding == 1\n", __func__); -- cgit v0.10.2 From 3aa2ae74ba630ec9b98736d64aea8e4cb490861d Mon Sep 17 00:00:00 2001 From: Russ Dill Date: Fri, 4 May 2012 04:24:47 -0700 Subject: USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0f) created a regression with Beagleboard xM if booting the kernel after running 'usb start' under u-boot. Finishing the reset before calling 'usb_add_hcd' fixes the regression. This is most likely due to usb_add_hcd calling the driver's reset and init functions which expect the hardware to be up and running. Signed-off-by: Russ Dill Acked-by: Felipe Balbi Cc: stable [3.4] Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 5c78f9e..e669c6a 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -242,15 +242,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) ehci_reset(omap_ehci); - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) { - dev_err(dev, "failed to add hcd with err %d\n", ret); - goto err_add_hcd; - } - - /* root ports should always stay powered */ - ehci_port_power(omap_ehci, 1); - if (pdata->phy_reset) { /* Hold the PHY in RESET for enough time till * PHY is settled and ready @@ -264,6 +255,15 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) gpio_set_value(pdata->reset_gpio_port[1], 1); } + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) { + dev_err(dev, "failed to add hcd with err %d\n", ret); + goto err_add_hcd; + } + + /* root ports should always stay powered */ + ehci_port_power(omap_ehci, 1); + return 0; err_add_hcd: -- cgit v0.10.2 From 5cbe61c5aff0a8ada691eb8b07dbfb55c303f640 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 7 May 2012 11:20:06 -0400 Subject: usb-serial: ftdi_sio: fix oops during autosuspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch (as1550) fixes a bug in the usb-serial core that affects the ftdi_sio driver and most likely others as well. The core implements suspend and resume routines, but it doesn't store pointers to those routines in the usb_driver structures that it registers, even though it does set those drivers' supports_autosuspend flag. The end result is that when one of these devices is autosuspended, we try to call through a NULL pointer. The patch fixes the problem by setting the suspend and resume method pointers to the appropriate routines in the USB serial core, along with the supports_autosuspend field, in each driver as it is registered. This should be back-ported to all the stable kernels that have the new usb_serial_register_drivers() interface. Signed-off-by: Alan Stern Reported-and-tested-by: Frank Schäfer Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 906f06e..f7b263e 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1336,7 +1336,6 @@ static int usb_serial_register(struct usb_serial_driver *driver) driver->description); return -EINVAL; } - driver->usb_driver->supports_autosuspend = 1; /* Add this device to our list of devices */ mutex_lock(&table_lock); @@ -1371,7 +1370,7 @@ static void usb_serial_deregister(struct usb_serial_driver *device) * @serial_drivers: NULL-terminated array of pointers to drivers to be registered * * Registers @udriver and all the drivers in the @serial_drivers array. - * Automatically fills in the .no_dynamic_id field in @udriver and + * Automatically fills in the .no_dynamic_id and PM fields in @udriver and * the .usb_driver field in each serial driver. */ int usb_serial_register_drivers(struct usb_driver *udriver, @@ -1390,11 +1389,17 @@ int usb_serial_register_drivers(struct usb_driver *udriver, * the serial drivers are registered, because the probe would * simply fail for lack of a matching serial driver. * Therefore save off udriver's id_table until we are all set. + * + * Suspend/resume support is implemented in the usb-serial core, + * so fill in the PM-related fields in udriver. */ saved_id_table = udriver->id_table; udriver->id_table = NULL; udriver->no_dynamic_id = 1; + udriver->supports_autosuspend = 1; + udriver->suspend = usb_serial_suspend; + udriver->resume = usb_serial_resume; rc = usb_register(udriver); if (rc) return rc; -- cgit v0.10.2 From c7f3619b90fc4c43ed326ec8b3f0299374763c92 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 7 May 2012 11:24:05 -0400 Subject: usb-serial: clean up unneeded PM-related fields This patch (as1551) cleans up the PM-related entries in the usb_driver structures of the various USB serial driver modules. Those entries are now filled in by the usb-serial core during driver registration, so they don't need to be initialized explicitly in the source code. The same is true of the one remaining no_dynamic_id entry. reset_resume remains a small problem, because the serial core doesn't support it. The patch ignores these entries. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 70c46b0..ba4f067 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -599,11 +599,8 @@ static struct usb_driver ch341_driver = { .name = "ch341", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, - .suspend = usb_serial_suspend, - .resume = usb_serial_resume, .reset_resume = ch341_reset_resume, .id_table = id_table, - .supports_autosuspend = 1, }; static struct usb_serial_driver ch341_device = { diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 46aee85..c32486d 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -355,10 +355,6 @@ static struct usb_driver f81232_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, - .suspend = usb_serial_suspend, - .resume = usb_serial_resume, - .no_dynamic_id = 1, - .supports_autosuspend = 1, }; static struct usb_serial_driver f81232_device = { diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ae0b4aa..d1674bc 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1224,11 +1224,6 @@ static struct usb_driver option_driver = { .name = "option", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, -#ifdef CONFIG_PM - .suspend = usb_serial_suspend, - .resume = usb_serial_resume, - .supports_autosuspend = 1, -#endif .id_table = option_ids, }; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 9eec2c3..34e51a0 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -100,9 +100,6 @@ static struct usb_driver pl2303_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, - .suspend = usb_serial_suspend, - .resume = usb_serial_resume, - .supports_autosuspend = 1, }; #define SET_LINE_REQUEST_TYPE 0x21 diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 201f281..3696924 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -117,9 +117,6 @@ static struct usb_driver qcdriver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, - .suspend = usb_serial_suspend, - .resume = usb_serial_resume, - .supports_autosuspend = true, }; static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index f298dda..7b77714 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -1055,11 +1055,8 @@ static struct usb_driver sierra_driver = { .name = "sierra", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, - .suspend = usb_serial_suspend, - .resume = usb_serial_resume, .reset_resume = sierra_reset_resume, .id_table = id_table, - .supports_autosuspend = 1, }; static struct usb_serial_driver sierra_device = { diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index cda513b..9820492 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -68,9 +68,6 @@ static struct usb_driver ssu100_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, - .suspend = usb_serial_suspend, - .resume = usb_serial_resume, - .supports_autosuspend = 1, }; struct ssu100_port_private { -- cgit v0.10.2 From 5026bb07be87ef5892742e6853ae6efa0f41961f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 7 May 2012 13:48:33 -0700 Subject: USB: serial: remove usb_serial_probe call in all drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse Cc: Matthias Bruestle and Harald Welte Cc: Lonnie Mendez Cc: Peter Berger Cc: Al Borchers Cc: Gary Brubaker Cc: Oliver Neukum Cc: Matthias Urlichs Cc: Support Department Cc: Rusty Russell Cc: Alan Stern Cc: Mauro Carvalho Chehab Cc: Kautuk Consul Cc: Bill Pemberton Cc: Paul Gortmaker Cc: Bart Hartgers Cc: Johan Hovold Cc: Preston Fick Cc: Uwe Bonnes Cc: Simon Arlott Cc: Andrew Worsley Cc: "Michał Wróbel" Cc: Andrew Morton Cc: Eric Dumazet Cc: "Eric W. Biederman" Cc: Felipe Balbi Cc: Aleksey Babahin Cc: Dan Carpenter Cc: Jiri Kosina Cc: Donald Lee Cc: Julia Lawall Cc: Michal Sroczynski Cc: Wang YanQing Cc: Dan Williams Cc: Thomas Tuttle Cc: Rigbert Hamisch Cc: "Rafael J. Wysocki" Cc: Kuninori Morimoto Cc: Jesper Juhl Cc: Adhir Ramjiawan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c index 7739ada..70147b9 100644 --- a/drivers/staging/quatech_usb2/quatech_usb2.c +++ b/drivers/staging/quatech_usb2/quatech_usb2.c @@ -132,7 +132,6 @@ MODULE_DEVICE_TABLE(usb, quausb2_id_table); /* custom structures we need go here */ static struct usb_driver quausb2_usb_driver = { .name = "quatech-usb2-serial", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = quausb2_id_table, }; diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index b547b7b..d6e5e18 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -197,7 +197,6 @@ struct quatech_port { static struct usb_driver serqt_usb_driver = { .name = "quatech-usb-serial", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = serqt_id_table, }; diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index eec4fb9..ac69b82 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -172,7 +172,6 @@ static void aircable_process_read_urb(struct urb *urb) static struct usb_driver aircable_driver = { .name = "aircable", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index f99f471..33dc0e3 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -716,7 +716,6 @@ static void ark3116_process_read_urb(struct urb *urb) static struct usb_driver ark3116_driver = { .name = "ark3116", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 2007385..eb12616 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -75,7 +75,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver belkin_driver = { .name = "belkin", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index ba4f067..83fd8e08 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -597,7 +597,6 @@ static int ch341_reset_resume(struct usb_interface *intf) static struct usb_driver ch341_driver = { .name = "ch341", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .reset_resume = ch341_reset_resume, .id_table = id_table, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 81468c0..cbfc08d 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -158,7 +158,6 @@ struct cp210x_port_private { static struct usb_driver cp210x_driver = { .name = "cp210x", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 7b804fd..5e76508 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -79,7 +79,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver cyberjack_driver = { .name = "cyberjack", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 6fac26c..14b64ba 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -91,7 +91,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver cypress_driver = { .name = "cypress", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index f8dad3a..00abe81 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -273,7 +273,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver digi_driver = { .name = "digi_acceleport", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 615e380..cbef1a5 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -53,7 +53,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver empeg_driver = { .name = "empeg", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index c32486d..db65e7e 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -352,7 +352,6 @@ static void f81232_release(struct usb_serial *serial) static struct usb_driver f81232_driver = { .name = "f81232", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5691b8b..40f9993 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -863,7 +863,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver ftdi_driver = { .name = "ftdi_sio", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index 4577b36..168acbb 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -26,7 +26,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver funsoft_driver = { .name = "funsoft", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 52c079d..3a57059 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -221,7 +221,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver garmin_driver = { .name = "garmin_gps", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 2563e78..d800ff3 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -38,7 +38,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver hp49gp_driver = { .name = "hp4X", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index d0e7c9a..7498b5e 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -97,7 +97,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver io_driver = { .name = "io_edgeport", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 5e4b471..88ab9f6 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -199,7 +199,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver io_driver = { .name = "io_ti", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 65b689a..340c39e 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -504,7 +504,6 @@ MODULE_DEVICE_TABLE(usb, ipaq_id_table); static struct usb_driver ipaq_driver = { .name = "ipaq", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = ipaq_id_table, }; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 52c61d7..b42e1bb 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -141,7 +141,6 @@ MODULE_DEVICE_TABLE(usb, usb_ipw_ids); static struct usb_driver usb_ipw_driver = { .name = "ipwtty", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = usb_ipw_ids, }; diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index ea09cf7..7cee101 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -79,7 +79,6 @@ MODULE_DEVICE_TABLE(usb, ir_id_table); static struct usb_driver ir_driver = { .name = "ir-usb", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = ir_id_table, }; diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index c40e5c2..88a0931 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -53,7 +53,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver iuu_driver = { .name = "iuu_phoenix", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 622853c..4ebf906 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -489,7 +489,6 @@ MODULE_DEVICE_TABLE(usb, keyspan_ids_combined); static struct usb_driver keyspan_driver = { .name = "keyspan", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = keyspan_ids_combined, }; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 341ae50..218169a 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -88,7 +88,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver keyspan_pda_driver = { .name = "keyspan_pda", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 02e1270..c97ca54 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -88,7 +88,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver kl5kusb105d_driver = { .name = "kl5kusb105d", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 7336e0e..d62d137 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -87,7 +87,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver kobil_driver = { .name = "kobil", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 4361364..bea53f1 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -85,7 +85,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver mct_u232_driver = { .name = "mct_u232", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index d17c867..06cf5c8 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -421,7 +421,6 @@ static void metrousb_unthrottle(struct tty_struct *tty) static struct usb_driver metrousb_driver = { .name = "metro-usb", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table }; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 178b766..0a0e8b4 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -2160,7 +2160,6 @@ static void mos7720_release(struct usb_serial *serial) static struct usb_driver usb_driver = { .name = "moschip7720", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = moschip_port_id_table, }; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index d9086ee..8f370e08 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2785,7 +2785,6 @@ static void mos7840_release(struct usb_serial *serial) static struct usb_driver io_driver = { .name = "mos7840", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = moschip_id_table_combined, }; diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index 3ab6214..36b5a75 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -33,7 +33,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver moto_driver = { .name = "moto-modem", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 31de00a..d750fa1 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -32,7 +32,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver navman_driver = { .name = "navman", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 1b6d53f..5cf1f5a 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -59,7 +59,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver omninet_driver = { .name = "omninet", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 858ee18..5a0f25c 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -585,7 +585,6 @@ static int opticon_resume(struct usb_interface *intf) static struct usb_driver opticon_driver = { .name = "opticon", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .suspend = opticon_suspend, .resume = opticon_resume, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d1674bc..a654f17 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1222,7 +1222,6 @@ MODULE_DEVICE_TABLE(usb, option_ids); static struct usb_driver option_driver = { .name = "option", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = option_ids, }; diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index d4bce46..bd3ce49 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -68,7 +68,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver oti6858_driver = { .name = "oti6858", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 34e51a0..93607a4 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -97,7 +97,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver pl2303_driver = { .name = "pl2303", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index 9662456..1be0653 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -79,7 +79,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver qcaux_driver = { .name = "qcaux", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 3696924..6c82f46 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -114,7 +114,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver qcdriver = { .name = "qcserial", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index ae4ee30..15db522 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -153,7 +153,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver safe_driver = { .name = "safe_serial", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c index 46c0430..b5e9298 100644 --- a/drivers/usb/serial/siemens_mpi.c +++ b/drivers/usb/serial/siemens_mpi.c @@ -31,7 +31,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver siemens_usb_mpi_driver = { .name = "siemens_mpi", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 7b77714..5f55cfe 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -1053,7 +1053,6 @@ static int sierra_reset_resume(struct usb_interface *intf) static struct usb_driver sierra_driver = { .name = "sierra", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .reset_resume = sierra_reset_resume, .id_table = id_table, diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 91fea7b..754b138 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -153,7 +153,6 @@ enum spcp8x5_type { static struct usb_driver spcp8x5_driver = { .name = "spcp8x5", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 9820492..fcc0024 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -65,7 +65,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver ssu100_driver = { .name = "ssu100", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index 04e8812..454d80a 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -271,7 +271,6 @@ static void symbol_release(struct usb_serial *serial) static struct usb_driver symbol_driver = { .name = "symbol", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 925f5f4..29b9c95 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -213,7 +213,6 @@ static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] static struct usb_driver ti_usb_driver = { .name = "ti_usb_3410_5052", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = ti_id_table_combined, }; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index f7b263e..e8c4ac9 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1098,7 +1098,6 @@ probe_error: module_put(type->driver.owner); return -EIO; } -EXPORT_SYMBOL_GPL(usb_serial_probe); void usb_serial_disconnect(struct usb_interface *interface) { @@ -1400,6 +1399,7 @@ int usb_serial_register_drivers(struct usb_driver *udriver, udriver->supports_autosuspend = 1; udriver->suspend = usb_serial_suspend; udriver->resume = usb_serial_resume; + udriver->probe = usb_serial_probe; rc = usb_register(udriver); if (rc) return rc; diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c index e3e8995..4e5426f 100644 --- a/drivers/usb/serial/usb_debug.c +++ b/drivers/usb/serial/usb_debug.c @@ -37,7 +37,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver debug_driver = { .name = "debug", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index d9b41fa..36e782a 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -165,7 +165,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver visor_driver = { .name = "visor", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c index 078f338..939ad7f 100644 --- a/drivers/usb/serial/vivopay-serial.c +++ b/drivers/usb/serial/vivopay-serial.c @@ -27,7 +27,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver vivopay_serial_driver = { .name = "vivopay-serial", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index d07794f..a0df894 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -79,7 +79,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver whiteheat_driver = { .name = "whiteheat", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/zio.c b/drivers/usb/serial/zio.c index 9d0bb37..2e858c3 100644 --- a/drivers/usb/serial/zio.c +++ b/drivers/usb/serial/zio.c @@ -24,7 +24,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver zio_driver = { .name = "zio", - .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, }; -- cgit v0.10.2 From 32078f915d1acab356080b144aa89fe3487f3979 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 7 May 2012 14:02:13 -0700 Subject: USB: serial: remove usb_serial_disconnect call in all drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse Cc: Matthias Bruestle and Harald Welte Cc: Lonnie Mendez Cc: Peter Berger Cc: Al Borchers Cc: Gary Brubaker Cc: Oliver Neukum Cc: Matthias Urlichs Cc: Support Department Cc: Rusty Russell Cc: Alan Stern Cc: Mauro Carvalho Chehab Cc: Kautuk Consul Cc: Bill Pemberton Cc: Paul Gortmaker Cc: Bart Hartgers Cc: Johan Hovold Cc: Preston Fick Cc: Uwe Bonnes Cc: Simon Arlott Cc: Andrew Worsley Cc: "Michał Wróbel" Cc: Andrew Morton Cc: Eric Dumazet Cc: "Eric W. Biederman" Cc: Felipe Balbi Cc: Aleksey Babahin Cc: Dan Carpenter Cc: Jiri Kosina Cc: Donald Lee Cc: Julia Lawall Cc: Michal Sroczynski Cc: Wang YanQing Cc: Dan Williams Cc: Thomas Tuttle Cc: Rigbert Hamisch Cc: "Rafael J. Wysocki" Cc: Kuninori Morimoto Cc: Jesper Juhl Cc: Adhir Ramjiawan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c index 70147b9..4e9c00e 100644 --- a/drivers/staging/quatech_usb2/quatech_usb2.c +++ b/drivers/staging/quatech_usb2/quatech_usb2.c @@ -132,7 +132,6 @@ MODULE_DEVICE_TABLE(usb, quausb2_id_table); /* custom structures we need go here */ static struct usb_driver quausb2_usb_driver = { .name = "quatech-usb2-serial", - .disconnect = usb_serial_disconnect, .id_table = quausb2_id_table, }; diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index d6e5e18..1ffdaef 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -197,7 +197,6 @@ struct quatech_port { static struct usb_driver serqt_usb_driver = { .name = "quatech-usb-serial", - .disconnect = usb_serial_disconnect, .id_table = serqt_id_table, }; diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index ac69b82..93aabd2 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -172,7 +172,6 @@ static void aircable_process_read_urb(struct urb *urb) static struct usb_driver aircable_driver = { .name = "aircable", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 33dc0e3..4b79679 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -716,7 +716,6 @@ static void ark3116_process_read_urb(struct urb *urb) static struct usb_driver ark3116_driver = { .name = "ark3116", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index eb12616..13031bb 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -75,7 +75,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver belkin_driver = { .name = "belkin", - .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 83fd8e08..4f0260a 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -597,7 +597,6 @@ static int ch341_reset_resume(struct usb_interface *intf) static struct usb_driver ch341_driver = { .name = "ch341", - .disconnect = usb_serial_disconnect, .reset_resume = ch341_reset_resume, .id_table = id_table, }; diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index cbfc08d..02a1cab 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -158,7 +158,6 @@ struct cp210x_port_private { static struct usb_driver cp210x_driver = { .name = "cp210x", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 5e76508..37fb911 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -79,7 +79,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver cyberjack_driver = { .name = "cyberjack", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 14b64ba..df53d57 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -91,7 +91,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver cypress_driver = { .name = "cypress", - .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 00abe81..3b584db 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -273,7 +273,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver digi_driver = { .name = "digi_acceleport", - .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index cbef1a5..80447e5 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -53,7 +53,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver empeg_driver = { .name = "empeg", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index db65e7e..9052ec3 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -352,7 +352,6 @@ static void f81232_release(struct usb_serial *serial) static struct usb_driver f81232_driver = { .name = "f81232", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 40f9993..7fbba46 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -863,7 +863,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver ftdi_driver = { .name = "ftdi_sio", - .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index 168acbb..2049911 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -26,7 +26,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver funsoft_driver = { .name = "funsoft", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 3a57059..0e595a6 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -221,7 +221,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver garmin_driver = { .name = "garmin_gps", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 2cc39ba..a2dcf08 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -52,7 +52,6 @@ static const struct usb_device_id generic_serial_ids[] = { static struct usb_driver generic_driver = { .name = "usbserial_generic", .probe = generic_probe, - .disconnect = usb_serial_disconnect, .id_table = generic_serial_ids, }; diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index d800ff3..37fe402 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -38,7 +38,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver hp49gp_driver = { .name = "hp4X", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 7498b5e..650693b 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -97,7 +97,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver io_driver = { .name = "io_edgeport", - .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 88ab9f6..643c120 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -199,7 +199,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver io_driver = { .name = "io_ti", - .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 340c39e..7d1ae70 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -504,7 +504,6 @@ MODULE_DEVICE_TABLE(usb, ipaq_id_table); static struct usb_driver ipaq_driver = { .name = "ipaq", - .disconnect = usb_serial_disconnect, .id_table = ipaq_id_table, }; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index b42e1bb..7690133 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -141,7 +141,6 @@ MODULE_DEVICE_TABLE(usb, usb_ipw_ids); static struct usb_driver usb_ipw_driver = { .name = "ipwtty", - .disconnect = usb_serial_disconnect, .id_table = usb_ipw_ids, }; diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 7cee101..c69a81e 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -79,7 +79,6 @@ MODULE_DEVICE_TABLE(usb, ir_id_table); static struct usb_driver ir_driver = { .name = "ir-usb", - .disconnect = usb_serial_disconnect, .id_table = ir_id_table, }; diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 88a0931..500e8fb 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -53,7 +53,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver iuu_driver = { .name = "iuu_phoenix", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 4ebf906..bb018df 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -489,7 +489,6 @@ MODULE_DEVICE_TABLE(usb, keyspan_ids_combined); static struct usb_driver keyspan_driver = { .name = "keyspan", - .disconnect = usb_serial_disconnect, .id_table = keyspan_ids_combined, }; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 218169a..62574cf 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -88,7 +88,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver keyspan_pda_driver = { .name = "keyspan_pda", - .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index c97ca54..26dcfac 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -88,7 +88,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver kl5kusb105d_driver = { .name = "kl5kusb105d", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index d62d137..68fb36a 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -87,7 +87,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver kobil_driver = { .name = "kobil", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index bea53f1..a63d1e8 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -85,7 +85,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver mct_u232_driver = { .name = "mct_u232", - .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 06cf5c8..14ad1db 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -421,7 +421,6 @@ static void metrousb_unthrottle(struct tty_struct *tty) static struct usb_driver metrousb_driver = { .name = "metro-usb", - .disconnect = usb_serial_disconnect, .id_table = id_table }; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 0a0e8b4..eef0d84 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -2160,7 +2160,6 @@ static void mos7720_release(struct usb_serial *serial) static struct usb_driver usb_driver = { .name = "moschip7720", - .disconnect = usb_serial_disconnect, .id_table = moschip_port_id_table, }; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 8f370e08..91c3c5e 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2785,7 +2785,6 @@ static void mos7840_release(struct usb_serial *serial) static struct usb_driver io_driver = { .name = "mos7840", - .disconnect = usb_serial_disconnect, .id_table = moschip_id_table_combined, }; diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index 36b5a75..f6b055f 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -33,7 +33,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver moto_driver = { .name = "moto-modem", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index d750fa1..6f12bbc 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -32,7 +32,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver navman_driver = { .name = "navman", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 5cf1f5a..72176f38 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -59,7 +59,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver omninet_driver = { .name = "omninet", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 5a0f25c..fe12cac 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -585,7 +585,6 @@ static int opticon_resume(struct usb_interface *intf) static struct usb_driver opticon_driver = { .name = "opticon", - .disconnect = usb_serial_disconnect, .suspend = opticon_suspend, .resume = opticon_resume, .id_table = id_table, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a654f17..780c276 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1222,7 +1222,6 @@ MODULE_DEVICE_TABLE(usb, option_ids); static struct usb_driver option_driver = { .name = "option", - .disconnect = usb_serial_disconnect, .id_table = option_ids, }; diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index bd3ce49..9b19503 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -68,7 +68,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver oti6858_driver = { .name = "oti6858", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 93607a4..642136e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -97,7 +97,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver pl2303_driver = { .name = "pl2303", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index 1be0653..b0b41c1 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -79,7 +79,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver qcaux_driver = { .name = "qcaux", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 6c82f46..400a59e 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -114,7 +114,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver qcdriver = { .name = "qcserial", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 15db522..546ea12 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -153,7 +153,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver safe_driver = { .name = "safe_serial", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c index b5e9298..0d3108a 100644 --- a/drivers/usb/serial/siemens_mpi.c +++ b/drivers/usb/serial/siemens_mpi.c @@ -31,7 +31,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver siemens_usb_mpi_driver = { .name = "siemens_mpi", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 5f55cfe..11be3c6 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -1053,7 +1053,6 @@ static int sierra_reset_resume(struct usb_interface *intf) static struct usb_driver sierra_driver = { .name = "sierra", - .disconnect = usb_serial_disconnect, .reset_resume = sierra_reset_resume, .id_table = id_table, }; diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 754b138..51e43cc 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -153,7 +153,6 @@ enum spcp8x5_type { static struct usb_driver spcp8x5_driver = { .name = "spcp8x5", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index fcc0024..f72b03f 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -65,7 +65,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver ssu100_driver = { .name = "ssu100", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index 454d80a..5ef07ca 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -271,7 +271,6 @@ static void symbol_release(struct usb_serial *serial) static struct usb_driver symbol_driver = { .name = "symbol", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 29b9c95..9d96224 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -213,7 +213,6 @@ static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] static struct usb_driver ti_usb_driver = { .name = "ti_usb_3410_5052", - .disconnect = usb_serial_disconnect, .id_table = ti_id_table_combined, }; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index e8c4ac9..9791312 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -43,17 +43,6 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/" #define DRIVER_DESC "USB Serial Driver core" -/* Driver structure we register with the USB core */ -static struct usb_driver usb_serial_driver = { - .name = "usbserial", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .suspend = usb_serial_suspend, - .resume = usb_serial_resume, - .no_dynamic_id = 1, - .supports_autosuspend = 1, -}; - /* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead the MODULE_DEVICE_TABLE declarations in each serial driver cause the "hotplug" program to pull in whatever module is necessary @@ -1099,7 +1088,7 @@ probe_error: return -EIO; } -void usb_serial_disconnect(struct usb_interface *interface) +static void usb_serial_disconnect(struct usb_interface *interface) { int i; struct usb_serial *serial = usb_get_intfdata(interface); @@ -1134,7 +1123,6 @@ void usb_serial_disconnect(struct usb_interface *interface) usb_serial_put(serial); dev_info(dev, "device disconnected\n"); } -EXPORT_SYMBOL_GPL(usb_serial_disconnect); int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) { @@ -1201,6 +1189,17 @@ static const struct tty_operations serial_ops = { struct tty_driver *usb_serial_tty_driver; +/* Driver structure we register with the USB core */ +static struct usb_driver usb_serial_driver = { + .name = "usbserial", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .suspend = usb_serial_suspend, + .resume = usb_serial_resume, + .no_dynamic_id = 1, + .supports_autosuspend = 1, +}; + static int __init usb_serial_init(void) { int i; @@ -1400,6 +1399,7 @@ int usb_serial_register_drivers(struct usb_driver *udriver, udriver->suspend = usb_serial_suspend; udriver->resume = usb_serial_resume; udriver->probe = usb_serial_probe; + udriver->disconnect = usb_serial_disconnect; rc = usb_register(udriver); if (rc) return rc; diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c index 4e5426f..e22e543 100644 --- a/drivers/usb/serial/usb_debug.c +++ b/drivers/usb/serial/usb_debug.c @@ -37,7 +37,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver debug_driver = { .name = "debug", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 36e782a..2e24bd3 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -165,7 +165,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver visor_driver = { .name = "visor", - .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c index 939ad7f..c7d8ab3 100644 --- a/drivers/usb/serial/vivopay-serial.c +++ b/drivers/usb/serial/vivopay-serial.c @@ -27,7 +27,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver vivopay_serial_driver = { .name = "vivopay-serial", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index a0df894..76840cd 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -79,7 +79,6 @@ MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver whiteheat_driver = { .name = "whiteheat", - .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; diff --git a/drivers/usb/serial/zio.c b/drivers/usb/serial/zio.c index 2e858c3..4822cc8 100644 --- a/drivers/usb/serial/zio.c +++ b/drivers/usb/serial/zio.c @@ -24,7 +24,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver zio_driver = { .name = "zio", - .disconnect = usb_serial_disconnect, .id_table = id_table, }; diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 4742838..17e9746 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -300,7 +300,6 @@ extern void usb_serial_port_softint(struct usb_serial_port *port); extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id); -extern void usb_serial_disconnect(struct usb_interface *iface); extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); extern int usb_serial_resume(struct usb_interface *intf); -- cgit v0.10.2 From 2bfd1c96a9fb9b547db9a2ad8428dc8de5526e92 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 7 May 2012 14:10:27 -0700 Subject: USB: serial: ch341: remove reset_resume callback This really just is the resume callback for the device, so use that, especially as the usb-serial core just overrode this callback so it wasn't being made anyway. Cc: Johan Hovold Cc: Alan Stern Cc: Rusty Russell Cc: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 4f0260a..95b2597 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -577,27 +577,20 @@ static int ch341_tiocmget(struct tty_struct *tty) return result; } - -static int ch341_reset_resume(struct usb_interface *intf) +static int ch341_resume(struct usb_serial *serial) { - struct usb_device *dev = interface_to_usbdev(intf); - struct usb_serial *serial = NULL; struct ch341_private *priv; - serial = usb_get_intfdata(intf); priv = usb_get_serial_port_data(serial->port[0]); - /*reconfigure ch341 serial port after bus-reset*/ - ch341_configure(dev, priv); - - usb_serial_resume(intf); + /* reconfigure ch341 serial port after bus-reset */ + ch341_configure(serial->dev, priv); return 0; } static struct usb_driver ch341_driver = { .name = "ch341", - .reset_resume = ch341_reset_resume, .id_table = id_table, }; @@ -619,6 +612,7 @@ static struct usb_serial_driver ch341_device = { .tiocmset = ch341_tiocmset, .read_int_callback = ch341_read_int_callback, .attach = ch341_attach, + .resume = ch341_resume, }; static struct usb_serial_driver * const serial_drivers[] = { -- cgit v0.10.2 From 3abee859c13ec6a0f49a7234eef011f5d45136f1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 7 May 2012 14:11:40 -0700 Subject: USB: serial: sierra: remove reset_resume callback This really just is the resume callback for the device, so use that, especially as the usb-serial core just overrode this callback so it wasn't being made anyway. Cc: Alan Stern Cc: Rusty Russell Cc: Johan Hovold Cc: Anton Samokhvalov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 11be3c6..1040f9d 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -1039,21 +1039,13 @@ static int sierra_resume(struct usb_serial *serial) return ec ? -EIO : 0; } -static int sierra_reset_resume(struct usb_interface *intf) -{ - struct usb_serial *serial = usb_get_intfdata(intf); - dev_err(&serial->dev->dev, "%s\n", __func__); - return usb_serial_resume(intf); -} #else #define sierra_suspend NULL #define sierra_resume NULL -#define sierra_reset_resume NULL #endif static struct usb_driver sierra_driver = { .name = "sierra", - .reset_resume = sierra_reset_resume, .id_table = id_table, }; -- cgit v0.10.2 From 2edd284bd752e58ccb312f3d623267fb79857db3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 7 May 2012 14:46:48 -0700 Subject: USB: serial: remove bizarre generic_serial probe function I can't remember why I wrote it like this many many years ago, but it's not needed at all, let's rely on the usb-serial core for this function, especially as it is being overridden by it anyway. This lets us make usb_serial_probe() a static function, which it should be. Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index a2dcf08..4e5e993 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -28,9 +28,6 @@ static int debug; #ifdef CONFIG_USB_SERIAL_GENERIC -static int generic_probe(struct usb_interface *interface, - const struct usb_device_id *id); - static __u16 vendor = 0x05f9; static __u16 product = 0xffff; @@ -51,7 +48,6 @@ static const struct usb_device_id generic_serial_ids[] = { static struct usb_driver generic_driver = { .name = "usbserial_generic", - .probe = generic_probe, .id_table = generic_serial_ids, }; @@ -74,16 +70,6 @@ static struct usb_serial_driver * const serial_drivers[] = { &usb_serial_generic_device, NULL }; -static int generic_probe(struct usb_interface *interface, - const struct usb_device_id *id) -{ - const struct usb_device_id *id_pattern; - - id_pattern = usb_match_id(interface, generic_device_ids); - if (id_pattern != NULL) - return usb_serial_probe(interface, id); - return -ENODEV; -} #endif int usb_serial_generic_register(int _debug) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 9791312..d1840ae 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -699,7 +699,7 @@ static const struct tty_port_operations serial_port_ops = { .shutdown = serial_down, }; -int usb_serial_probe(struct usb_interface *interface, +static int usb_serial_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(interface); diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 17e9746..749836f 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -298,9 +298,6 @@ extern void usb_serial_deregister_drivers(struct usb_driver *udriver, struct usb_serial_driver * const serial_drivers[]); extern void usb_serial_port_softint(struct usb_serial_port *port); -extern int usb_serial_probe(struct usb_interface *iface, - const struct usb_device_id *id); - extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); extern int usb_serial_resume(struct usb_interface *intf); -- cgit v0.10.2 From b69cc672052540e8efb1368420f10d7d4d8b8a3d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=89ric=20Piel?= Date: Mon, 7 May 2012 12:37:54 +0200 Subject: USB: ftdi-sio: add support for Physik Instrumente E-861 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds VID/PID for the PI E-861. Without it, I had to do: modprobe -q ftdi-sio product=0x1008 vendor=0x1a72 http://www.physikinstrumente.com/en/products/prdetail.php?sortnr=900610 Signed-off-by: Éric Piel Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7fbba46..e0e2b94 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -809,6 +809,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) }, { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) }, + { USB_DEVICE(PI_VID, PI_E861_PID) }, { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 0838baf8..f3c7c78 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -785,6 +785,14 @@ #define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */ #define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */ + +/* + * Physik Instrumente + * http://www.physikinstrumente.com/en/products/ + */ +#define PI_VID 0x1a72 /* Vendor ID */ +#define PI_E861_PID 0x1008 /* E-861 piezo controller USB connection */ + /* * Bayer Ascensia Contour blood glucose meter USB-converter cable. * http://winglucofacts.com/cables/ -- cgit v0.10.2 From 1949f9e2435cc2e87c63da167af63faafc49b388 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 7 May 2012 13:22:52 -0400 Subject: USB: xhci-hcd: print URB's expected length in decimal, not hex This patch changes the output format specifier of a debugging line in the xhci-hcd driver. An URB's transfer_buffer_length should be printed in decimal; there's no reason to print it in hex. Especially since the actual_length value, printed earlier on the same line, is already in decimal. Signed-off-by: Alan Stern Cc: Sarah Sharp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index d40194c..329fd2a 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2272,7 +2272,7 @@ cleanup: (status != 0 && !usb_endpoint_xfer_isoc(&urb->ep->desc))) xhci_dbg(xhci, "Giveback URB %p, len = %d, " - "expected = %x, status = %d\n", + "expected = %d, status = %d\n", urb, urb->actual_length, urb->transfer_buffer_length, status); -- cgit v0.10.2 From ccd68bb8d8ecfb10d62ef6c65851119b1a49c1be Mon Sep 17 00:00:00 2001 From: girish verma Date: Sun, 6 May 2012 20:35:13 +0530 Subject: USB: xhci: testing sizeof xhci_doorbell_array 2 time MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Testing BUILD_BUG_ON xhci_doorbell_array structure 2 time, redundant statement Signed-off-by: Girish Verma Cc: Sarah Sharp  --- drivers/usb/host/xhci.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 5910048..16c05c6 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4098,7 +4098,6 @@ static int __init xhci_hcd_init(void) BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8); /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */ BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8); - BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8); return 0; unreg_pci: xhci_unregister_pci(); -- cgit v0.10.2 From eb9c5836384cd2a276254df6254ed71117983626 Mon Sep 17 00:00:00 2001 From: Matthias Fend Date: Mon, 7 May 2012 14:37:30 +0200 Subject: USB: ffs-test: fix length argument of out function call The out functions should only handle actual available data instead of the complete buffer. Otherwise for example the ep0_consume function will report ghost events since it tries to decode the complete buffer - which may contain partly invalid data. Signed-off-by: Matthias Fend Cc: stable Acked-by: Michal Nazarewicz Signed-off-by: Greg Kroah-Hartman diff --git a/tools/usb/ffs-test.c b/tools/usb/ffs-test.c index 4b107b5..8674b9e 100644 --- a/tools/usb/ffs-test.c +++ b/tools/usb/ffs-test.c @@ -297,7 +297,7 @@ static void *start_thread_helper(void *arg) ret = t->in(t, t->buf, t->buf_size); if (ret > 0) { - ret = t->out(t, t->buf, t->buf_size); + ret = t->out(t, t->buf, ret); name = out_name; op = "write"; } else { -- cgit v0.10.2 From bfb8bfad1860281810415ecbcccb841374fc6eb3 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sat, 5 May 2012 13:16:51 +0200 Subject: USB: make vendor id of root hubs greppable It took me surprisingly long to find the location where the Linux Foundation vendor id (0x1d6b) is set for the root hubs. A minor update to three comments makes those locations (trivially) greppable. Signed-off-by: Paul Bolle Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 140d3e1..0cd2daa 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -138,7 +138,7 @@ static const u8 usb3_rh_dev_descriptor[18] = { 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */ 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */ - 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */ + 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ 0x03, 0x00, /* __le16 idProduct; device 0x0003 */ KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ @@ -159,7 +159,7 @@ static const u8 usb2_rh_dev_descriptor [18] = { 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */ - 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */ + 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ 0x02, 0x00, /* __le16 idProduct; device 0x0002 */ KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ @@ -182,7 +182,7 @@ static const u8 usb11_rh_dev_descriptor [18] = { 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */ - 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */ + 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ 0x01, 0x00, /* __le16 idProduct; device 0x0001 */ KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ -- cgit v0.10.2 From ab59ac0155ebe16d563b68d63ceb2e2d0747180f Mon Sep 17 00:00:00 2001 From: Jan Luebbe Date: Mon, 7 May 2012 10:25:16 +0200 Subject: ohci-da8xx: set MODULE_ALIAS to allow autoloading The Davinci USB platform device (in mach-davinci/usb.c) uses "ohci" as the name. To allow autoloading of the relevant driver, the module needs to set the MODULE_ALIAS. Signed-off-by: Jan Luebbe Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 8435097..269b1e0 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -454,3 +454,5 @@ static struct platform_driver ohci_hcd_da8xx_driver = { .name = "ohci", }, }; + +MODULE_ALIAS("platform:ohci"); -- cgit v0.10.2 From efa015bbc410198a192cd3e504ce24104e8c8852 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Fri, 4 May 2012 16:47:14 +0300 Subject: usb: gadget: ci13xxx: fix ep list removal in gadget unregistering code Since ep0{out,in} are never on gadget's ep_list, there's no need to try to unlink them, even more so because ep_list linkage is not initialized for these endpoints. Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 1a44bf9..b6f359c 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -2737,7 +2737,7 @@ static int ci13xxx_stop(struct usb_gadget_driver *driver) for (i = 0; i < hw_ep_max; i++) { struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; - if (!list_empty(&mEp->ep.ep_list)) + if (mEp->num) list_del_init(&mEp->ep.ep_list); if (mEp->qh.ptr != NULL) -- cgit v0.10.2 From d36ade60e3cc212992f001d2046815b068073c0c Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Fri, 4 May 2012 16:47:15 +0300 Subject: usb: gadget: ci13xxx: initialize ep0{out,in} dynamically Change ep0{out,in} macros into dynamically assigned pointers in gadget initialization time. Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index b6f359c..b44c83d 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -1650,8 +1650,8 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) gadget_for_each_ep(ep, gadget) { usb_ep_fifo_flush(ep); } - usb_ep_fifo_flush(&udc->ep0out.ep); - usb_ep_fifo_flush(&udc->ep0in.ep); + usb_ep_fifo_flush(&udc->ep0out->ep); + usb_ep_fifo_flush(&udc->ep0in->ep); udc->driver->disconnect(gadget); @@ -1661,7 +1661,7 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) } if (udc->status != NULL) { - usb_ep_free_request(&udc->ep0in.ep, udc->status); + usb_ep_free_request(&udc->ep0in->ep, udc->status); udc->status = NULL; } @@ -1701,7 +1701,7 @@ __acquires(udc->lock) if (retval) goto done; - udc->status = usb_ep_alloc_request(&udc->ep0in.ep, GFP_ATOMIC); + udc->status = usb_ep_alloc_request(&udc->ep0in->ep, GFP_ATOMIC); if (udc->status == NULL) retval = -ENOMEM; @@ -1744,7 +1744,7 @@ static int isr_get_status_response(struct ci13xxx *udc, __releases(mEp->lock) __acquires(mEp->lock) { - struct ci13xxx_ep *mEp = &udc->ep0in; + struct ci13xxx_ep *mEp = udc->ep0in; struct usb_request *req = NULL; gfp_t gfp_flags = GFP_ATOMIC; int dir, num, retval; @@ -1835,7 +1835,7 @@ __acquires(mEp->lock) trace("%p", udc); - mEp = (udc->ep0_dir == TX) ? &udc->ep0out : &udc->ep0in; + mEp = (udc->ep0_dir == TX) ? udc->ep0out : udc->ep0in; udc->status->context = udc; udc->status->complete = isr_setup_status_complete; @@ -1877,7 +1877,7 @@ __acquires(mEp->lock) spin_unlock(mEp->lock); if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) && mReq->req.length) - mEpTemp = &_udc->ep0in; + mEpTemp = _udc->ep0in; mReq->req.complete(&mEpTemp->ep, &mReq->req); spin_lock(mEp->lock); } @@ -1950,8 +1950,8 @@ __acquires(udc->lock) * Flush data and handshake transactions of previous * setup packet. */ - _ep_nuke(&udc->ep0out); - _ep_nuke(&udc->ep0in); + _ep_nuke(udc->ep0out); + _ep_nuke(udc->ep0in); /* read_setup_packet */ do { @@ -2279,7 +2279,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { if (req->length) mEp = (_udc->ep0_dir == RX) ? - &_udc->ep0out : &_udc->ep0in; + _udc->ep0out : _udc->ep0in; if (!list_empty(&mEp->qh.queue)) { _ep_nuke(mEp); retval = -EOVERFLOW; @@ -2496,7 +2496,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) if (is_active) { pm_runtime_get_sync(&_gadget->dev); hw_device_reset(udc); - hw_device_state(udc->ep0out.qh.dma); + hw_device_state(udc->ep0out->qh.dma); } else { hw_device_state(0); if (udc->udc_driver->notify_event) @@ -2637,28 +2637,38 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, else memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr)); - /* skip ep0 out and in endpoints */ - if (i == 0) + /* + * set up shorthands for ep0 out and in endpoints, + * don't add to gadget's ep_list + */ + if (i == 0) { + if (j == RX) + udc->ep0out = mEp; + else + udc->ep0in = mEp; + continue; + } list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list); } } if (retval) goto done; + spin_unlock_irqrestore(udc->lock, flags); - udc->ep0out.ep.desc = &ctrl_endpt_out_desc; - retval = usb_ep_enable(&udc->ep0out.ep); + udc->ep0out->ep.desc = &ctrl_endpt_out_desc; + retval = usb_ep_enable(&udc->ep0out->ep); if (retval) return retval; - udc->ep0in.ep.desc = &ctrl_endpt_in_desc; - retval = usb_ep_enable(&udc->ep0in.ep); + udc->ep0in->ep.desc = &ctrl_endpt_in_desc; + retval = usb_ep_enable(&udc->ep0in->ep); if (retval) return retval; spin_lock_irqsave(udc->lock, flags); - udc->gadget.ep0 = &udc->ep0in.ep; + udc->gadget.ep0 = &udc->ep0in->ep; /* bind gadget */ driver->driver.bus = NULL; udc->gadget.dev.driver = &driver->driver; @@ -2684,7 +2694,7 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, } } - retval = hw_device_state(udc->ep0out.qh.dma); + retval = hw_device_state(udc->ep0out->qh.dma); if (retval) pm_runtime_put_sync(&udc->gadget.dev); diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h index 6490cf8..d6dbaad 100644 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -125,8 +125,7 @@ struct ci13xxx { struct usb_gadget gadget; /* USB slave device */ struct ci13xxx_ep ci13xxx_ep[ENDPT_MAX]; /* extended endpts */ u32 ep0_dir; /* ep0 direction */ -#define ep0out ci13xxx_ep[0] -#define ep0in ci13xxx_ep[hw_ep_max / 2] + struct ci13xxx_ep *ep0out, *ep0in; u8 remote_wakeup; /* Is remote wakeup feature enabled by the host? */ u8 suspended; /* suspended by the host */ -- cgit v0.10.2 From f9df8395c7f9b1b8d0ea9221595a97f2f4720359 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Fri, 4 May 2012 16:47:16 +0300 Subject: usb: gadget: ci13xxx: rename register layouts Currently, the register prefixes in the driver seem to be mixed: the capability registers are the ones that contain capability information, such as number of hardware endpoints, while the registers that are used to program the controller are called operational registers. Normally, capability registers start at 0x100 offset of the register window and are followed by operational registers. In some versions, however, capability registers start at 0x0 offset. This patch renames the register and adjusts their offsets appropriately, leaving the possibility of having a non-standard capability offset. I couldn't find any mentions of the TESTMODE register anywhere, so I suspect it might only be enabled in chipidea internal versions of the controller and I'm really inclined to remove it from the driver or at least hiding it behind a config option. Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c index d07e44c..6e77446 100644 --- a/drivers/usb/gadget/ci13xxx_msm.c +++ b/drivers/usb/gadget/ci13xxx_msm.c @@ -79,7 +79,8 @@ static int ci13xxx_msm_probe(struct platform_device *pdev) return -ENOMEM; } - ret = udc_probe(&ci13xxx_msm_udc_driver, &pdev->dev, regs); + ret = udc_probe(&ci13xxx_msm_udc_driver, &pdev->dev, regs, + DEF_CAPOFFSET); if (ret < 0) { dev_err(&pdev->dev, "udc_probe failed\n"); goto iounmap; diff --git a/drivers/usb/gadget/ci13xxx_pci.c b/drivers/usb/gadget/ci13xxx_pci.c index 63ef96c..c890e1c 100644 --- a/drivers/usb/gadget/ci13xxx_pci.c +++ b/drivers/usb/gadget/ci13xxx_pci.c @@ -55,6 +55,7 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { void __iomem *regs = NULL; + uintptr_t capoffset = DEF_CAPOFFSET; int retval = 0; if (id == NULL) @@ -86,7 +87,11 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev, pci_set_master(pdev); pci_try_set_mwi(pdev); - retval = udc_probe(&ci13xxx_pci_udc_driver, &pdev->dev, regs); + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + capoffset = 0; + + retval = udc_probe(&ci13xxx_pci_udc_driver, &pdev->dev, regs, + capoffset); if (retval) goto iounmap; diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index b44c83d..3a45339 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -138,7 +138,8 @@ static int ffs_nr(u32 x) static struct { unsigned lpm; /* is LPM? */ void __iomem *abs; /* bus map offset */ - void __iomem *cap; /* bus map offset + CAP offset + CAP data */ + void __iomem *cap; /* bus map offset + CAP offset */ + void __iomem *op; /* bus map offset + OP offset */ size_t size; /* bank size */ } hw_bank; @@ -146,26 +147,26 @@ static struct { #define ABS_AHBBURST (0x0090UL) #define ABS_AHBMODE (0x0098UL) /* UDC register map */ -#define ABS_CAPLENGTH (0x100UL) -#define ABS_HCCPARAMS (0x108UL) -#define ABS_DCCPARAMS (0x124UL) +#define CAP_CAPLENGTH (0x000UL) +#define CAP_HCCPARAMS (0x008UL) +#define CAP_DCCPARAMS (0x024UL) #define ABS_TESTMODE (hw_bank.lpm ? 0x0FCUL : 0x138UL) /* offset to CAPLENTGH (addr + data) */ -#define CAP_USBCMD (0x000UL) -#define CAP_USBSTS (0x004UL) -#define CAP_USBINTR (0x008UL) -#define CAP_DEVICEADDR (0x014UL) -#define CAP_ENDPTLISTADDR (0x018UL) -#define CAP_PORTSC (0x044UL) -#define CAP_DEVLC (0x084UL) -#define CAP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL) -#define CAP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL) -#define CAP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL) -#define CAP_ENDPTFLUSH (hw_bank.lpm ? 0x0E0UL : 0x074UL) -#define CAP_ENDPTSTAT (hw_bank.lpm ? 0x0E4UL : 0x078UL) -#define CAP_ENDPTCOMPLETE (hw_bank.lpm ? 0x0E8UL : 0x07CUL) -#define CAP_ENDPTCTRL (hw_bank.lpm ? 0x0ECUL : 0x080UL) -#define CAP_LAST (hw_bank.lpm ? 0x12CUL : 0x0C0UL) +#define OP_USBCMD (0x000UL) +#define OP_USBSTS (0x004UL) +#define OP_USBINTR (0x008UL) +#define OP_DEVICEADDR (0x014UL) +#define OP_ENDPTLISTADDR (0x018UL) +#define OP_PORTSC (0x044UL) +#define OP_DEVLC (0x084UL) +#define OP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL) +#define OP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL) +#define OP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL) +#define OP_ENDPTFLUSH (hw_bank.lpm ? 0x0E0UL : 0x074UL) +#define OP_ENDPTSTAT (hw_bank.lpm ? 0x0E4UL : 0x078UL) +#define OP_ENDPTCOMPLETE (hw_bank.lpm ? 0x0E8UL : 0x07CUL) +#define OP_ENDPTCTRL (hw_bank.lpm ? 0x0ECUL : 0x080UL) +#define OP_LAST (hw_bank.lpm ? 0x12CUL : 0x0C0UL) /* maximum number of enpoints: valid only after hw_device_reset() */ static unsigned hw_ep_max; @@ -193,85 +194,65 @@ static int ep_to_bit(int n) } /** - * hw_aread: reads from register bitfield - * @addr: address relative to bus map + * hw_read: reads from a register bitfield + * @base: register block address + * @addr: address relative to operational register base * @mask: bitfield mask * * This function returns register bitfield data */ -static u32 hw_aread(u32 addr, u32 mask) +static u32 hw_read(void __iomem *base, u32 addr, u32 mask) { - return ioread32(addr + hw_bank.abs) & mask; + return ioread32(addr + base) & mask; } /** - * hw_awrite: writes to register bitfield - * @addr: address relative to bus map + * hw_write: writes to a register bitfield + * @base: register block address + * @addr: address relative to operational register base * @mask: bitfield mask * @data: new data */ -static void hw_awrite(u32 addr, u32 mask, u32 data) +static void hw_write(void __iomem *base, u32 addr, u32 mask, u32 data) { - iowrite32(hw_aread(addr, ~mask) | (data & mask), - addr + hw_bank.abs); + iowrite32(hw_read(base, addr, ~mask) | (data & mask), + addr + base); } /** - * hw_cread: reads from register bitfield - * @addr: address relative to CAP offset plus content + * hw_test_and_clear: tests & clears operational register bitfield + * @base: register block address + * @addr: address relative to operational register base * @mask: bitfield mask * * This function returns register bitfield data */ -static u32 hw_cread(u32 addr, u32 mask) +static u32 hw_test_and_clear(void __iomem *base, u32 addr, u32 mask) { - return ioread32(addr + hw_bank.cap) & mask; -} - -/** - * hw_cwrite: writes to register bitfield - * @addr: address relative to CAP offset plus content - * @mask: bitfield mask - * @data: new data - */ -static void hw_cwrite(u32 addr, u32 mask, u32 data) -{ - iowrite32(hw_cread(addr, ~mask) | (data & mask), - addr + hw_bank.cap); -} - -/** - * hw_ctest_and_clear: tests & clears register bitfield - * @addr: address relative to CAP offset plus content - * @mask: bitfield mask - * - * This function returns register bitfield data - */ -static u32 hw_ctest_and_clear(u32 addr, u32 mask) -{ - u32 reg = hw_cread(addr, mask); + u32 reg = hw_read(base, addr, mask); - iowrite32(reg, addr + hw_bank.cap); + iowrite32(reg, addr + base); return reg; } /** - * hw_ctest_and_write: tests & writes register bitfield - * @addr: address relative to CAP offset plus content + * hw_test_and_write: tests & writes operational register bitfield + * @base: register block address + * @addr: address relative to operational register base * @mask: bitfield mask * @data: new data * * This function returns register bitfield data */ -static u32 hw_ctest_and_write(u32 addr, u32 mask, u32 data) +static u32 hw_test_and_write(void __iomem *base, u32 addr, u32 mask, u32 data) { - u32 reg = hw_cread(addr, ~0); + u32 reg = hw_read(base, addr, ~0); - iowrite32((reg & ~mask) | (data & mask), addr + hw_bank.cap); + iowrite32((reg & ~mask) | (data & mask), addr + base); return (reg & mask) >> ffs_nr(mask); } -static int hw_device_init(void __iomem *base) +static int hw_device_init(void __iomem *base, uintptr_t cap_offset) { u32 reg; @@ -279,16 +260,18 @@ static int hw_device_init(void __iomem *base) hw_bank.abs = base; hw_bank.cap = hw_bank.abs; - hw_bank.cap += ABS_CAPLENGTH; - hw_bank.cap += ioread8(hw_bank.cap); + hw_bank.cap += cap_offset; + hw_bank.op = hw_bank.cap + ioread8(hw_bank.cap); - reg = hw_aread(ABS_HCCPARAMS, HCCPARAMS_LEN) >> ffs_nr(HCCPARAMS_LEN); + reg = hw_read(hw_bank.cap, CAP_HCCPARAMS, HCCPARAMS_LEN) >> + ffs_nr(HCCPARAMS_LEN); hw_bank.lpm = reg; - hw_bank.size = hw_bank.cap - hw_bank.abs; - hw_bank.size += CAP_LAST; + hw_bank.size = hw_bank.op - hw_bank.abs; + hw_bank.size += OP_LAST; hw_bank.size /= sizeof(u32); - reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN); + reg = hw_read(hw_bank.cap, CAP_DCCPARAMS, DCCPARAMS_DEN) >> + ffs_nr(DCCPARAMS_DEN); hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ if (hw_ep_max == 0 || hw_ep_max > ENDPT_MAX) @@ -311,11 +294,11 @@ static int hw_device_init(void __iomem *base) static int hw_device_reset(struct ci13xxx *udc) { /* should flush & stop before reset */ - hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0); - hw_cwrite(CAP_USBCMD, USBCMD_RS, 0); + hw_write(hw_bank.op, OP_ENDPTFLUSH, ~0, ~0); + hw_write(hw_bank.op, OP_USBCMD, USBCMD_RS, 0); - hw_cwrite(CAP_USBCMD, USBCMD_RST, USBCMD_RST); - while (hw_cread(CAP_USBCMD, USBCMD_RST)) + hw_write(hw_bank.op, OP_USBCMD, USBCMD_RST, USBCMD_RST); + while (hw_read(hw_bank.op, OP_USBCMD, USBCMD_RST)) udelay(10); /* not RTOS friendly */ @@ -324,14 +307,15 @@ static int hw_device_reset(struct ci13xxx *udc) CI13XXX_CONTROLLER_RESET_EVENT); if (udc->udc_driver->flags & CI13XXX_DISABLE_STREAMING) - hw_cwrite(CAP_USBMODE, USBMODE_SDIS, USBMODE_SDIS); + hw_write(hw_bank.op, OP_USBMODE, USBMODE_SDIS, USBMODE_SDIS); /* USBMODE should be configured step by step */ - hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); - hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE); - hw_cwrite(CAP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); /* HW >= 2.3 */ + hw_write(hw_bank.op, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); + hw_write(hw_bank.op, OP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE); + /* HW >= 2.3 */ + hw_write(hw_bank.op, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); - if (hw_cread(CAP_USBMODE, USBMODE_CM) != USBMODE_CM_DEVICE) { + if (hw_read(hw_bank.op, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DEVICE) { pr_err("cannot enter in device mode"); pr_err("lpm = %i", hw_bank.lpm); return -ENODEV; @@ -350,14 +334,14 @@ static int hw_device_reset(struct ci13xxx *udc) static int hw_device_state(u32 dma) { if (dma) { - hw_cwrite(CAP_ENDPTLISTADDR, ~0, dma); + hw_write(hw_bank.op, OP_ENDPTLISTADDR, ~0, dma); /* interrupt, error, port change, reset, sleep/suspend */ - hw_cwrite(CAP_USBINTR, ~0, + hw_write(hw_bank.op, OP_USBINTR, ~0, USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); - hw_cwrite(CAP_USBCMD, USBCMD_RS, USBCMD_RS); + hw_write(hw_bank.op, OP_USBCMD, USBCMD_RS, USBCMD_RS); } else { - hw_cwrite(CAP_USBCMD, USBCMD_RS, 0); - hw_cwrite(CAP_USBINTR, ~0, 0); + hw_write(hw_bank.op, OP_USBCMD, USBCMD_RS, 0); + hw_write(hw_bank.op, OP_USBINTR, ~0, 0); } return 0; } @@ -375,10 +359,10 @@ static int hw_ep_flush(int num, int dir) do { /* flush any pending transfer */ - hw_cwrite(CAP_ENDPTFLUSH, BIT(n), BIT(n)); - while (hw_cread(CAP_ENDPTFLUSH, BIT(n))) + hw_write(hw_bank.op, OP_ENDPTFLUSH, BIT(n), BIT(n)); + while (hw_read(hw_bank.op, OP_ENDPTFLUSH, BIT(n))) cpu_relax(); - } while (hw_cread(CAP_ENDPTSTAT, BIT(n))); + } while (hw_read(hw_bank.op, OP_ENDPTSTAT, BIT(n))); return 0; } @@ -393,7 +377,7 @@ static int hw_ep_flush(int num, int dir) static int hw_ep_disable(int num, int dir) { hw_ep_flush(num, dir); - hw_cwrite(CAP_ENDPTCTRL + num * sizeof(u32), + hw_write(hw_bank.op, OP_ENDPTCTRL + num * sizeof(u32), dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); return 0; } @@ -429,7 +413,7 @@ static int hw_ep_enable(int num, int dir, int type) mask |= ENDPTCTRL_RXE; /* enable */ data |= ENDPTCTRL_RXE; } - hw_cwrite(CAP_ENDPTCTRL + num * sizeof(u32), mask, data); + hw_write(hw_bank.op, OP_ENDPTCTRL + num * sizeof(u32), mask, data); return 0; } @@ -444,7 +428,7 @@ static int hw_ep_get_halt(int num, int dir) { u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; - return hw_cread(CAP_ENDPTCTRL + num * sizeof(u32), mask) ? 1 : 0; + return !!hw_read(hw_bank.op, OP_ENDPTCTRL + num * sizeof(u32), mask); } /** @@ -457,7 +441,7 @@ static int hw_ep_get_halt(int num, int dir) static int hw_test_and_clear_setup_status(int n) { n = ep_to_bit(n); - return hw_ctest_and_clear(CAP_ENDPTSETUPSTAT, BIT(n)); + return hw_test_and_clear(hw_bank.op, OP_ENDPTSETUPSTAT, BIT(n)); } /** @@ -472,14 +456,16 @@ static int hw_ep_prime(int num, int dir, int is_ctrl) { int n = hw_ep_bit(num, dir); - if (is_ctrl && dir == RX && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num))) + if (is_ctrl && dir == RX && + hw_read(hw_bank.op, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; - hw_cwrite(CAP_ENDPTPRIME, BIT(n), BIT(n)); + hw_write(hw_bank.op, OP_ENDPTPRIME, BIT(n), BIT(n)); - while (hw_cread(CAP_ENDPTPRIME, BIT(n))) + while (hw_read(hw_bank.op, OP_ENDPTPRIME, BIT(n))) cpu_relax(); - if (is_ctrl && dir == RX && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num))) + if (is_ctrl && dir == RX && + hw_read(hw_bank.op, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; /* status shoult be tested according with manual but it doesn't work */ @@ -501,12 +487,13 @@ static int hw_ep_set_halt(int num, int dir, int value) return -EINVAL; do { - u32 addr = CAP_ENDPTCTRL + num * sizeof(u32); + u32 addr = OP_ENDPTCTRL + num * sizeof(u32); u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; /* data toggle - reserved for EP0 but it's in ESS */ - hw_cwrite(addr, mask_xs|mask_xr, value ? mask_xs : mask_xr); + hw_write(hw_bank.op, addr, mask_xs|mask_xr, + value ? mask_xs : mask_xr); } while (value != hw_ep_get_halt(num, dir)); @@ -525,8 +512,8 @@ static int hw_intr_clear(int n) if (n >= REG_BITS) return -EINVAL; - hw_cwrite(CAP_USBINTR, BIT(n), 0); - hw_cwrite(CAP_USBSTS, BIT(n), BIT(n)); + hw_write(hw_bank.op, OP_USBINTR, BIT(n), 0); + hw_write(hw_bank.op, OP_USBSTS, BIT(n), BIT(n)); return 0; } @@ -542,10 +529,10 @@ static int hw_intr_force(int n) if (n >= REG_BITS) return -EINVAL; - hw_awrite(ABS_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE); - hw_cwrite(CAP_USBINTR, BIT(n), BIT(n)); - hw_cwrite(CAP_USBSTS, BIT(n), BIT(n)); - hw_awrite(ABS_TESTMODE, TESTMODE_FORCE, 0); + hw_write(hw_bank.cap, ABS_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE); + hw_write(hw_bank.op, OP_USBINTR, BIT(n), BIT(n)); + hw_write(hw_bank.op, OP_USBSTS, BIT(n), BIT(n)); + hw_write(hw_bank.cap, ABS_TESTMODE, TESTMODE_FORCE, 0); return 0; } @@ -556,8 +543,8 @@ static int hw_intr_force(int n) */ static int hw_port_is_high_speed(void) { - return hw_bank.lpm ? hw_cread(CAP_DEVLC, DEVLC_PSPD) : - hw_cread(CAP_PORTSC, PORTSC_HSP); + return hw_bank.lpm ? hw_read(hw_bank.op, OP_DEVLC, DEVLC_PSPD) : + hw_read(hw_bank.op, OP_PORTSC, PORTSC_HSP); } /** @@ -567,7 +554,7 @@ static int hw_port_is_high_speed(void) */ static u8 hw_port_test_get(void) { - return hw_cread(CAP_PORTSC, PORTSC_PTC) >> ffs_nr(PORTSC_PTC); + return hw_read(hw_bank.op, OP_PORTSC, PORTSC_PTC) >> ffs_nr(PORTSC_PTC); } /** @@ -583,7 +570,7 @@ static int hw_port_test_set(u8 mode) if (mode > TEST_MODE_MAX) return -EINVAL; - hw_cwrite(CAP_PORTSC, PORTSC_PTC, mode << ffs_nr(PORTSC_PTC)); + hw_write(hw_bank.op, OP_PORTSC, PORTSC_PTC, mode << ffs_nr(PORTSC_PTC)); return 0; } @@ -594,7 +581,7 @@ static int hw_port_test_set(u8 mode) */ static u32 hw_read_intr_enable(void) { - return hw_cread(CAP_USBINTR, ~0); + return hw_read(hw_bank.op, OP_USBINTR, ~0); } /** @@ -604,7 +591,7 @@ static u32 hw_read_intr_enable(void) */ static u32 hw_read_intr_status(void) { - return hw_cread(CAP_USBSTS, ~0); + return hw_read(hw_bank.op, OP_USBSTS, ~0); } /** @@ -622,7 +609,7 @@ static size_t hw_register_read(u32 *buf, size_t size) size = hw_bank.size; for (i = 0; i < size; i++) - buf[i] = hw_aread(i * sizeof(u32), ~0); + buf[i] = hw_read(hw_bank.cap, i * sizeof(u32), ~0); return size; } @@ -645,7 +632,7 @@ static int hw_register_write(u16 addr, u32 data) /* align */ addr *= sizeof(u32); - hw_awrite(addr, ~0, data); + hw_write(hw_bank.cap, addr, ~0, data); return 0; } @@ -659,7 +646,7 @@ static int hw_register_write(u16 addr, u32 data) static int hw_test_and_clear_complete(int n) { n = ep_to_bit(n); - return hw_ctest_and_clear(CAP_ENDPTCOMPLETE, BIT(n)); + return hw_test_and_clear(hw_bank.op, OP_ENDPTCOMPLETE, BIT(n)); } /** @@ -672,7 +659,7 @@ static u32 hw_test_and_clear_intr_active(void) { u32 reg = hw_read_intr_status() & hw_read_intr_enable(); - hw_cwrite(CAP_USBSTS, ~0, reg); + hw_write(hw_bank.op, OP_USBSTS, ~0, reg); return reg; } @@ -684,7 +671,7 @@ static u32 hw_test_and_clear_intr_active(void) */ static int hw_test_and_clear_setup_guard(void) { - return hw_ctest_and_write(CAP_USBCMD, USBCMD_SUTW, 0); + return hw_test_and_write(hw_bank.op, OP_USBCMD, USBCMD_SUTW, 0); } /** @@ -695,7 +682,8 @@ static int hw_test_and_clear_setup_guard(void) */ static int hw_test_and_set_setup_guard(void) { - return hw_ctest_and_write(CAP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); + return hw_test_and_write(hw_bank.op, OP_USBCMD, USBCMD_SUTW, + USBCMD_SUTW); } /** @@ -707,8 +695,9 @@ static int hw_test_and_set_setup_guard(void) static int hw_usb_set_address(u8 value) { /* advance */ - hw_cwrite(CAP_DEVICEADDR, DEVICEADDR_USBADR | DEVICEADDR_USBADRA, - value << ffs_nr(DEVICEADDR_USBADR) | DEVICEADDR_USBADRA); + hw_write(hw_bank.op, OP_DEVICEADDR, + DEVICEADDR_USBADR | DEVICEADDR_USBADRA, + value << ffs_nr(DEVICEADDR_USBADR) | DEVICEADDR_USBADRA); return 0; } @@ -723,16 +712,16 @@ static int hw_usb_reset(void) hw_usb_set_address(0); /* ESS flushes only at end?!? */ - hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0); /* flush all EPs */ + hw_write(hw_bank.op, OP_ENDPTFLUSH, ~0, ~0); /* clear setup token semaphores */ - hw_cwrite(CAP_ENDPTSETUPSTAT, 0, 0); /* writes its content */ + hw_write(hw_bank.op, OP_ENDPTSETUPSTAT, 0, 0); /* clear complete status */ - hw_cwrite(CAP_ENDPTCOMPLETE, 0, 0); /* writes its content */ + hw_write(hw_bank.op, OP_ENDPTCOMPLETE, 0, 0); /* wait until all bits cleared */ - while (hw_cread(CAP_ENDPTPRIME, ~0)) + while (hw_read(hw_bank.op, OP_ENDPTPRIME, ~0)) udelay(10); /* not RTOS friendly */ /* reset all endpoints ? */ @@ -1514,13 +1503,14 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) else mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK; wmb(); - if (hw_cread(CAP_ENDPTPRIME, BIT(n))) + if (hw_read(hw_bank.op, OP_ENDPTPRIME, BIT(n))) goto done; do { - hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); - tmp_stat = hw_cread(CAP_ENDPTSTAT, BIT(n)); - } while (!hw_cread(CAP_USBCMD, USBCMD_ATDTW)); - hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, 0); + hw_write(hw_bank.op, OP_USBCMD, USBCMD_ATDTW, + USBCMD_ATDTW); + tmp_stat = hw_read(hw_bank.op, OP_ENDPTSTAT, BIT(n)); + } while (!hw_read(hw_bank.op, OP_USBCMD, USBCMD_ATDTW)); + hw_write(hw_bank.op, OP_USBCMD, USBCMD_ATDTW, 0); if (tmp_stat) goto done; } @@ -2524,12 +2514,12 @@ static int ci13xxx_wakeup(struct usb_gadget *_gadget) trace("remote wakeup feature is not enabled\n"); goto out; } - if (!hw_cread(CAP_PORTSC, PORTSC_SUSP)) { + if (!hw_read(hw_bank.op, OP_PORTSC, PORTSC_SUSP)) { ret = -EINVAL; trace("port is not suspended\n"); goto out; } - hw_cwrite(CAP_PORTSC, PORTSC_FPR, PORTSC_FPR); + hw_write(hw_bank.op, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); out: spin_unlock_irqrestore(udc->lock, flags); return ret; @@ -2796,8 +2786,8 @@ static irqreturn_t udc_irq(void) spin_lock(udc->lock); if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) { - if (hw_cread(CAP_USBMODE, USBMODE_CM) != - USBMODE_CM_DEVICE) { + if (hw_read(hw_bank.op, OP_USBMODE, USBMODE_CM) != + USBMODE_CM_DEVICE) { spin_unlock(udc->lock); return IRQ_NONE; } @@ -2875,7 +2865,7 @@ static void udc_release(struct device *dev) * Kernel assumes 32-bit DMA operations by default, no need to dma_set_mask */ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, - void __iomem *regs) + void __iomem *regs, uintptr_t capoffset) { struct ci13xxx *udc; int retval = 0; @@ -2909,7 +2899,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, udc->gadget.dev.parent = dev; udc->gadget.dev.release = udc_release; - retval = hw_device_init(regs); + retval = hw_device_init(regs, capoffset); if (retval < 0) goto free_udc; diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h index d6dbaad..66f41a3 100644 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -140,6 +140,9 @@ struct ci13xxx { /****************************************************************************** * REGISTERS *****************************************************************************/ +/* Default offset of capability registers */ +#define DEF_CAPOFFSET 0x100 + /* register size */ #define REG_BITS (32) -- cgit v0.10.2 From d56ba3205fe2e61264ef41f29cd90a666df032e4 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Fri, 4 May 2012 16:47:17 +0300 Subject: usb: gadget: ci13xxx_pci: add langwell/penwell pci ids Add pci ids for ChipIdea UDC as found in langwell/penwell SoCs. Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_pci.c b/drivers/usb/gadget/ci13xxx_pci.c index c890e1c..ef5da49 100644 --- a/drivers/usb/gadget/ci13xxx_pci.c +++ b/drivers/usb/gadget/ci13xxx_pci.c @@ -142,6 +142,8 @@ static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev) static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = { { PCI_DEVICE(0x153F, 0x1004) }, { PCI_DEVICE(0x153F, 0x1006) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829) }, { 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ } }; MODULE_DEVICE_TABLE(pci, ci13xxx_pci_id_table); -- cgit v0.10.2 From 68e24113457e437b1576670f2419b77ed0531e9e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 8 May 2012 15:46:14 -0700 Subject: USB: serial: rework usb_serial_register/deregister_drivers() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan Cc: Alan Stern Cc: Al Borchers Cc: Aleksey Babahin Cc: Andrew Morton Cc: Andrew Worsley Cc: Bart Hartgers Cc: Bill Pemberton Cc: Dan Carpenter Cc: Dan Williams Cc: Donald Lee Cc: Eric Dumazet Cc: "Eric W. Biederman" Cc: Felipe Balbi Cc: Gary Brubaker Cc: Jesper Juhl Cc: Jiri Kosina Cc: Johan Hovold Cc: Julia Lawall Cc: Kautuk Consul Cc: Kuninori Morimoto Cc: Lonnie Mendez Cc: Matthias Bruestle and Harald Welte Cc: Matthias Urlichs Cc: Mauro Carvalho Chehab Cc: Michal Sroczynski Cc: "Michał Wróbel" Cc: Oliver Neukum Cc: Paul Gortmaker Cc: Peter Berger Cc: Preston Fick Cc: "Rafael J. Wysocki" Cc: Rigbert Hamisch Cc: Rusty Russell Cc: Simon Arlott Cc: Support Department Cc: Thomas Tuttle Cc: Uwe Bonnes Cc: Wang YanQing Cc: William Greathouse Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c index 4e9c00e..a977aca 100644 --- a/drivers/staging/quatech_usb2/quatech_usb2.c +++ b/drivers/staging/quatech_usb2/quatech_usb2.c @@ -116,7 +116,7 @@ static bool debug; #define FOURTHCHAR ((unsigned char *)(urb->transfer_buffer))[i + 3] #define FIFTHCHAR ((unsigned char *)(urb->transfer_buffer))[i + 4] -static const struct usb_device_id quausb2_id_table[] = { +static const struct usb_device_id id_table[] = { {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU2_100)}, {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_100)}, {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_400)}, @@ -126,14 +126,7 @@ static const struct usb_device_id quausb2_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_400)}, {} /* Terminating entry */ }; - -MODULE_DEVICE_TABLE(usb, quausb2_id_table); - -/* custom structures we need go here */ -static struct usb_driver quausb2_usb_driver = { - .name = "quatech-usb2-serial", - .id_table = quausb2_id_table, -}; +MODULE_DEVICE_TABLE(usb, id_table); /** * quatech2_port: Structure in which to keep all the messy stuff that this @@ -1922,7 +1915,7 @@ static struct usb_serial_driver quatech2_device = { .name = "quatech_usb2", }, .description = DRIVER_DESC, - .id_table = quausb2_id_table, + .id_table = id_table, .num_ports = 8, .open = qt2_open, .close = qt2_close, @@ -1947,7 +1940,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &quatech2_device, NULL }; -module_usb_serial_driver(quausb2_usb_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index 1ffdaef..f2ae004 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -125,7 +125,7 @@ static bool debug; #define MODEM_CTRL 0x40 #define RS232_MODE 0x00 -static const struct usb_device_id serqt_id_table[] = { +static const struct usb_device_id id_table[] = { {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU200)}, {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU100)}, {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU200)}, @@ -152,8 +152,7 @@ static const struct usb_device_id serqt_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU100_2)}, {} /* Terminating entry */ }; - -MODULE_DEVICE_TABLE(usb, serqt_id_table); +MODULE_DEVICE_TABLE(usb, id_table); struct qt_get_device_data { __u8 porta; @@ -195,11 +194,6 @@ struct quatech_port { char closePending; }; -static struct usb_driver serqt_usb_driver = { - .name = "quatech-usb-serial", - .id_table = serqt_id_table, -}; - static int port_paranoia_check(struct usb_serial_port *port, const char *function) { @@ -1544,7 +1538,7 @@ static struct usb_serial_driver quatech_device = { .name = "serqt", }, .description = DRIVER_DESC, - .id_table = serqt_id_table, + .id_table = id_table, .num_ports = 8, .open = qt_open, .close = qt_close, @@ -1567,7 +1561,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &quatech_device, NULL }; -module_usb_serial_driver(serqt_usb_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 93aabd2..cef5d75 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -170,11 +170,6 @@ static void aircable_process_read_urb(struct urb *urb) tty_kref_put(tty); } -static struct usb_driver aircable_driver = { - .name = "aircable", - .id_table = id_table, -}; - static struct usb_serial_driver aircable_device = { .driver = { .owner = THIS_MODULE, @@ -194,7 +189,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &aircable_device, NULL }; -module_usb_serial_driver(aircable_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 4b79679..9413b74 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -714,11 +714,6 @@ static void ark3116_process_read_urb(struct urb *urb) tty_kref_put(tty); } -static struct usb_driver ark3116_driver = { - .name = "ark3116", - .id_table = id_table, -}; - static struct usb_serial_driver ark3116_device = { .driver = { .owner = THIS_MODULE, @@ -745,7 +740,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &ark3116_device, NULL }; -module_usb_serial_driver(ark3116_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 13031bb..5965df7 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -62,7 +62,7 @@ static int belkin_sa_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -static const struct usb_device_id id_table_combined[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) }, { USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) }, { USB_DEVICE(PERACOM_VID, PERACOM_PID) }, @@ -71,12 +71,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE(usb, id_table_combined); - -static struct usb_driver belkin_driver = { - .name = "belkin", - .id_table = id_table_combined, -}; +MODULE_DEVICE_TABLE(usb, id_table); /* All of the device info needed for the serial converters */ static struct usb_serial_driver belkin_device = { @@ -85,7 +80,7 @@ static struct usb_serial_driver belkin_device = { .name = "belkin", }, .description = "Belkin / Peracom / GoHubs USB Serial Adapter", - .id_table = id_table_combined, + .id_table = id_table, .num_ports = 1, .open = belkin_sa_open, .close = belkin_sa_close, @@ -513,7 +508,7 @@ exit: return retval; } -module_usb_serial_driver(belkin_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 95b2597..a2b7ea7 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -589,11 +589,6 @@ static int ch341_resume(struct usb_serial *serial) return 0; } -static struct usb_driver ch341_driver = { - .name = "ch341", - .id_table = id_table, -}; - static struct usb_serial_driver ch341_device = { .driver = { .owner = THIS_MODULE, @@ -619,7 +614,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &ch341_device, NULL }; -module_usb_serial_driver(ch341_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 02a1cab..1b19262 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -156,11 +156,6 @@ struct cp210x_port_private { __u8 bInterfaceNumber; }; -static struct usb_driver cp210x_driver = { - .name = "cp210x", - .id_table = id_table, -}; - static struct usb_serial_driver cp210x_device = { .driver = { .owner = THIS_MODULE, @@ -880,7 +875,7 @@ static void cp210x_release(struct usb_serial *serial) } } -module_usb_serial_driver(cp210x_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 37fb911..3aa0b53 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -77,11 +77,6 @@ static const struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver cyberjack_driver = { - .name = "cyberjack", - .id_table = id_table, -}; - static struct usb_serial_driver cyberjack_device = { .driver = { .owner = THIS_MODULE, @@ -455,7 +450,7 @@ exit: usb_serial_port_softint(port); } -module_usb_serial_driver(cyberjack_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index df53d57..b78c34e 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -89,11 +89,6 @@ static const struct usb_device_id id_table_combined[] = { MODULE_DEVICE_TABLE(usb, id_table_combined); -static struct usb_driver cypress_driver = { - .name = "cypress", - .id_table = id_table_combined, -}; - enum packet_format { packet_format_1, /* b0:status, b1:payload count */ packet_format_2 /* b0[7:3]:status, b0[2:0]:payload count */ @@ -1308,7 +1303,7 @@ static void cypress_write_int_callback(struct urb *urb) cypress_send(port); } -module_usb_serial_driver(cypress_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 3b584db..b5cd838 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -271,12 +271,6 @@ static const struct usb_device_id id_table_4[] = { MODULE_DEVICE_TABLE(usb, id_table_combined); -static struct usb_driver digi_driver = { - .name = "digi_acceleport", - .id_table = id_table_combined, -}; - - /* device info needed for the Digi serial converter */ static struct usb_serial_driver digi_acceleport_2_device = { @@ -1553,7 +1547,7 @@ static int digi_read_oob_callback(struct urb *urb) } -module_usb_serial_driver(digi_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 80447e5..cdf61dd 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -51,11 +51,6 @@ static const struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver empeg_driver = { - .name = "empeg", - .id_table = id_table, -}; - static struct usb_serial_driver empeg_device = { .driver = { .owner = THIS_MODULE, @@ -134,7 +129,7 @@ static void empeg_init_termios(struct tty_struct *tty) tty_encode_baud_rate(tty, 115200, 115200); } -module_usb_serial_driver(empeg_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 9052ec3..5a247ff 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -350,18 +350,12 @@ static void f81232_release(struct usb_serial *serial) } } -static struct usb_driver f81232_driver = { - .name = "f81232", - .id_table = id_table, -}; - static struct usb_serial_driver f81232_device = { .driver = { .owner = THIS_MODULE, .name = "f81232", }, .id_table = id_table, - .usb_driver = &f81232_driver, .num_ports = 1, .bulk_in_size = 256, .bulk_out_size = 256, @@ -385,7 +379,7 @@ static struct usb_serial_driver * const serial_drivers[] = { NULL, }; -module_usb_serial_driver(f81232_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver"); MODULE_AUTHOR("Greg Kroah-Hartman dev); } -module_usb_serial_driver(ipaq_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, ipaq_id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 7690133..5811d34 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -132,17 +132,11 @@ enum { #define IPW_WANTS_TO_SEND 0x30 -static const struct usb_device_id usb_ipw_ids[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(IPW_VID, IPW_PID) }, { }, }; - -MODULE_DEVICE_TABLE(usb, usb_ipw_ids); - -static struct usb_driver usb_ipw_driver = { - .name = "ipwtty", - .id_table = usb_ipw_ids, -}; +MODULE_DEVICE_TABLE(usb, id_table); static bool debug; @@ -313,7 +307,7 @@ static struct usb_serial_driver ipw_device = { .name = "ipw", }, .description = "IPWireless converter", - .id_table = usb_ipw_ids, + .id_table = id_table, .num_ports = 1, .disconnect = usb_wwan_disconnect, .open = ipw_open, @@ -329,7 +323,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &ipw_device, NULL }; -module_usb_serial_driver(usb_ipw_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); /* Module information */ MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index c69a81e..e9f8e19 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -77,11 +77,6 @@ static const struct usb_device_id ir_id_table[] = { MODULE_DEVICE_TABLE(usb, ir_id_table); -static struct usb_driver ir_driver = { - .name = "ir-usb", - .id_table = ir_id_table, -}; - static struct usb_serial_driver ir_device = { .driver = { .owner = THIS_MODULE, @@ -436,7 +431,7 @@ static int __init ir_init(void) ir_device.bulk_out_size = buffer_size; } - retval = usb_serial_register_drivers(&ir_driver, serial_drivers); + retval = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ir_id_table); if (retval == 0) printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" DRIVER_DESC "\n"); @@ -445,7 +440,7 @@ static int __init ir_init(void) static void __exit ir_exit(void) { - usb_serial_deregister_drivers(&ir_driver, serial_drivers); + usb_serial_deregister_drivers(serial_drivers); } diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 500e8fb..22b1eb5 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -51,11 +51,6 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver iuu_driver = { - .name = "iuu_phoenix", - .id_table = id_table, -}; - /* turbo parameter */ static int boost = 100; static int clockmode = 1; @@ -1254,7 +1249,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &iuu_device, NULL }; -module_usb_serial_driver(iuu_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR("Alain Degreffe eczema@ecze.com"); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index ec46053..a1b9924 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -130,7 +130,7 @@ struct keyspan_port_private { #include "keyspan_usa67msg.h" -module_usb_serial_driver(keyspan_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, keyspan_ids_combined); static void keyspan_break_ctl(struct tty_struct *tty, int break_state) { diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index bb018df..fe1c5d9 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -487,11 +487,6 @@ static const struct usb_device_id keyspan_ids_combined[] = { MODULE_DEVICE_TABLE(usb, keyspan_ids_combined); -static struct usb_driver keyspan_driver = { - .name = "keyspan", - .id_table = keyspan_ids_combined, -}; - /* usb_device_id table for the pre-firmware download keyspan devices */ static const struct usb_device_id keyspan_pre_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 62574cf..a4ac3cf 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -86,11 +86,6 @@ static const struct usb_device_id id_table_combined[] = { MODULE_DEVICE_TABLE(usb, id_table_combined); -static struct usb_driver keyspan_pda_driver = { - .name = "keyspan_pda", - .id_table = id_table_combined, -}; - static const struct usb_device_id id_table_std[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) }, { } /* Terminating entry */ @@ -828,7 +823,7 @@ static struct usb_serial_driver * const serial_drivers[] = { NULL }; -module_usb_serial_driver(keyspan_pda_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 26dcfac..5bed59c 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -86,11 +86,6 @@ static const struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver kl5kusb105d_driver = { - .name = "kl5kusb105d", - .id_table = id_table, -}; - static struct usb_serial_driver kl5kusb105d_device = { .driver = { .owner = THIS_MODULE, @@ -681,7 +676,7 @@ static int klsi_105_tiocmset(struct tty_struct *tty, return retval; } -module_usb_serial_driver(kl5kusb105d_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 68fb36a..fafeabb 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -81,16 +81,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_KAAN_SIM_PRODUCT_ID) }, { } /* Terminating entry */ }; - - MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver kobil_driver = { - .name = "kobil", - .id_table = id_table, -}; - - static struct usb_serial_driver kobil_device = { .driver = { .owner = THIS_MODULE, @@ -674,7 +666,7 @@ static int kobil_ioctl(struct tty_struct *tty, } } -module_usb_serial_driver(kobil_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index a63d1e8..d0ec1aa 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -73,20 +73,14 @@ static void mct_u232_unthrottle(struct tty_struct *tty); /* * All of the device info needed for the MCT USB-RS232 converter. */ -static const struct usb_device_id id_table_combined[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(MCT_U232_VID, MCT_U232_PID) }, { USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) }, { USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) }, { USB_DEVICE(MCT_U232_BELKIN_F5U109_VID, MCT_U232_BELKIN_F5U109_PID) }, { } /* Terminating entry */ }; - -MODULE_DEVICE_TABLE(usb, id_table_combined); - -static struct usb_driver mct_u232_driver = { - .name = "mct_u232", - .id_table = id_table_combined, -}; +MODULE_DEVICE_TABLE(usb, id_table); static struct usb_serial_driver mct_u232_device = { .driver = { @@ -94,7 +88,7 @@ static struct usb_serial_driver mct_u232_device = { .name = "mct_u232", }, .description = "MCT U232", - .id_table = id_table_combined, + .id_table = id_table, .num_ports = 1, .open = mct_u232_open, .close = mct_u232_close, @@ -887,7 +881,7 @@ static int mct_u232_get_icount(struct tty_struct *tty, return 0; } -module_usb_serial_driver(mct_u232_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 14ad1db..81423f7 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -419,11 +419,6 @@ static void metrousb_unthrottle(struct tty_struct *tty) result); } -static struct usb_driver metrousb_driver = { - .name = "metro-usb", - .id_table = id_table -}; - static struct usb_serial_driver metrousb_device = { .driver = { .owner = THIS_MODULE, @@ -449,7 +444,7 @@ static struct usb_serial_driver * const serial_drivers[] = { NULL, }; -module_usb_serial_driver(metrousb_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Philip Nicastro"); diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index eef0d84..a07dd3c 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -79,12 +79,12 @@ static struct usb_serial_driver moschip7720_2port_driver; #define MOSCHIP_DEVICE_ID_7720 0x7720 #define MOSCHIP_DEVICE_ID_7715 0x7715 -static const struct usb_device_id moschip_port_id_table[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) }, { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7715) }, { } /* terminating entry */ }; -MODULE_DEVICE_TABLE(usb, moschip_port_id_table); +MODULE_DEVICE_TABLE(usb, id_table); #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT @@ -2158,18 +2158,13 @@ static void mos7720_release(struct usb_serial *serial) kfree(usb_get_serial_port_data(serial->port[i])); } -static struct usb_driver usb_driver = { - .name = "moschip7720", - .id_table = moschip_port_id_table, -}; - static struct usb_serial_driver moschip7720_2port_driver = { .driver = { .owner = THIS_MODULE, .name = "moschip7720", }, .description = "Moschip 2 port adapter", - .id_table = moschip_port_id_table, + .id_table = id_table, .calc_num_ports = mos77xx_calc_num_ports, .open = mos7720_open, .close = mos7720_close, @@ -2195,7 +2190,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &moschip7720_2port_driver, NULL }; -module_usb_serial_driver(usb_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 91c3c5e..29160f8 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -117,8 +117,7 @@ #define MOSCHIP_DEVICE_ID_7810 0x7810 /* The native component can have its vendor/device id's overridden * in vendor-specific implementations. Such devices can be handled - * by making a change here, in moschip_port_id_table, and in - * moschip_id_table_combined + * by making a change here, in id_table. */ #define USB_VENDOR_ID_BANDB 0x0856 #define BANDB_DEVICE_ID_USO9ML2_2 0xAC22 @@ -191,7 +190,7 @@ static int device_type; -static const struct usb_device_id moschip_port_id_table[] = { +static const struct usb_device_id id_table[] __devinitconst = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)}, @@ -212,30 +211,7 @@ static const struct usb_device_id moschip_port_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, {} /* terminating entry */ }; - -static const struct usb_device_id moschip_id_table_combined[] __devinitconst = { - {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, - {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, - {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)}, - {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, - {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, - {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, - {} /* terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, moschip_id_table_combined); +MODULE_DEVICE_TABLE(usb, id_table); /* This structure holds all of the local port information */ @@ -2783,18 +2759,13 @@ static void mos7840_release(struct usb_serial *serial) } } -static struct usb_driver io_driver = { - .name = "mos7840", - .id_table = moschip_id_table_combined, -}; - static struct usb_serial_driver moschip7840_4port_device = { .driver = { .owner = THIS_MODULE, .name = "mos7840", }, .description = DRIVER_DESC, - .id_table = moschip_port_id_table, + .id_table = id_table, .num_ports = 4, .open = mos7840_open, .close = mos7840_close, @@ -2824,7 +2795,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &moschip7840_4port_device, NULL }; -module_usb_serial_driver(io_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index f6b055f..c5ff6c7 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -31,11 +31,6 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver moto_driver = { - .name = "moto-modem", - .id_table = id_table, -}; - static struct usb_serial_driver moto_device = { .driver = { .owner = THIS_MODULE, @@ -49,5 +44,5 @@ static struct usb_serial_driver * const serial_drivers[] = { &moto_device, NULL }; -module_usb_serial_driver(moto_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 6f12bbc..7a09e8a 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -30,11 +30,6 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver navman_driver = { - .name = "navman", - .id_table = id_table, -}; - static void navman_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; @@ -124,7 +119,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &navman_device, NULL }; -module_usb_serial_driver(navman_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 72176f38..6f3d705 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -54,15 +54,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) }, { } /* Terminating entry */ }; - MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver omninet_driver = { - .name = "omninet", - .id_table = id_table, -}; - - static struct usb_serial_driver zyxel_omninet_device = { .driver = { .owner = THIS_MODULE, @@ -306,7 +299,7 @@ static void omninet_release(struct usb_serial *serial) kfree(usb_get_serial_port_data(port)); } -module_usb_serial_driver(omninet_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index fe12cac..91f8904 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -615,7 +615,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &opticon_device, NULL }; -module_usb_serial_driver(opticon_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 780c276..1aae902 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1220,11 +1220,6 @@ static const struct usb_device_id option_ids[] = { }; MODULE_DEVICE_TABLE(usb, option_ids); -static struct usb_driver option_driver = { - .name = "option", - .id_table = option_ids, -}; - /* The card has three separate interfaces, which the serial driver * recognizes separately, thus num_port=1. */ @@ -1293,7 +1288,7 @@ struct option_port_private { unsigned long tx_start_time[N_OUT_URB]; }; -module_usb_serial_driver(option_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, option_ids); static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason, const struct option_blacklist_info *blacklist) diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 9b19503..5976b65 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -66,11 +66,6 @@ static const struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver oti6858_driver = { - .name = "oti6858", - .id_table = id_table, -}; - static bool debug; /* requests */ @@ -921,7 +916,7 @@ static void oti6858_write_bulk_callback(struct urb *urb) } } -module_usb_serial_driver(oti6858_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(OTI6858_DESCRIPTION); MODULE_AUTHOR(OTI6858_AUTHOR); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 642136e..13b8dd6 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -95,11 +95,6 @@ static const struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver pl2303_driver = { - .name = "pl2303", - .id_table = id_table, -}; - #define SET_LINE_REQUEST_TYPE 0x21 #define SET_LINE_REQUEST 0x20 @@ -840,7 +835,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &pl2303_device, NULL }; -module_usb_serial_driver(pl2303_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index b0b41c1..a4edc7e 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -77,11 +77,6 @@ static struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver qcaux_driver = { - .name = "qcaux", - .id_table = id_table, -}; - static struct usb_serial_driver qcaux_device = { .driver = { .owner = THIS_MODULE, @@ -95,5 +90,5 @@ static struct usb_serial_driver * const serial_drivers[] = { &qcaux_device, NULL }; -module_usb_serial_driver(qcaux_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 400a59e..bc690ae8 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -112,11 +112,6 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver qcdriver = { - .name = "qcserial", - .id_table = id_table, -}; - static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) { struct usb_wwan_intf_private *data; @@ -277,7 +272,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &qcdevice, NULL }; -module_usb_serial_driver(qcdriver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 546ea12..36e9d9f 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -151,11 +151,6 @@ static struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver safe_driver = { - .name = "safe_serial", - .id_table = id_table, -}; - static const __u16 crc10_table[256] = { 0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff, 0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe, @@ -337,12 +332,12 @@ static int __init safe_init(void) } } - return usb_serial_register_drivers(&safe_driver, serial_drivers); + return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, id_table); } static void __exit safe_exit(void) { - usb_serial_deregister_drivers(&safe_driver, serial_drivers); + usb_serial_deregister_drivers(serial_drivers); } module_init(safe_init); diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c index 0d3108a..e4a1787 100644 --- a/drivers/usb/serial/siemens_mpi.c +++ b/drivers/usb/serial/siemens_mpi.c @@ -29,11 +29,6 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver siemens_usb_mpi_driver = { - .name = "siemens_mpi", - .id_table = id_table, -}; - static struct usb_serial_driver siemens_usb_mpi_device = { .driver = { .owner = THIS_MODULE, @@ -47,7 +42,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &siemens_usb_mpi_device, NULL }; -module_usb_serial_driver(siemens_usb_mpi_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 1040f9d..ba54a0a 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -1044,11 +1044,6 @@ static int sierra_resume(struct usb_serial *serial) #define sierra_resume NULL #endif -static struct usb_driver sierra_driver = { - .name = "sierra", - .id_table = id_table, -}; - static struct usb_serial_driver sierra_device = { .driver = { .owner = THIS_MODULE, @@ -1077,7 +1072,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &sierra_device, NULL }; -module_usb_serial_driver(sierra_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 51e43cc..1fc1cab 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -151,12 +151,6 @@ enum spcp8x5_type { SPCP835_TYPE, }; -static struct usb_driver spcp8x5_driver = { - .name = "spcp8x5", - .id_table = id_table, -}; - - struct spcp8x5_private { spinlock_t lock; enum spcp8x5_type type; @@ -662,7 +656,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &spcp8x5_device, NULL }; -module_usb_serial_driver(spcp8x5_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index f72b03f..3fee23b 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -59,15 +59,8 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)}, {} /* Terminating entry */ }; - MODULE_DEVICE_TABLE(usb, id_table); - -static struct usb_driver ssu100_driver = { - .name = "ssu100", - .id_table = id_table, -}; - struct ssu100_port_private { spinlock_t status_lock; u8 shadowLSR; @@ -671,7 +664,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &ssu100_device, NULL }; -module_usb_serial_driver(ssu100_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index 5ef07ca..f7c4405 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -269,11 +269,6 @@ static void symbol_release(struct usb_serial *serial) kfree(priv); } -static struct usb_driver symbol_driver = { - .name = "symbol", - .id_table = id_table, -}; - static struct usb_serial_driver symbol_device = { .driver = { .owner = THIS_MODULE, @@ -294,7 +289,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &symbol_device, NULL }; -module_usb_serial_driver(symbol_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 9d96224..a180b15 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -211,11 +211,6 @@ static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] { } }; -static struct usb_driver ti_usb_driver = { - .name = "ti_usb_3410_5052", - .id_table = ti_id_table_combined, -}; - static struct usb_serial_driver ti_1port_device = { .driver = { .owner = THIS_MODULE, @@ -342,20 +337,18 @@ static int __init ti_init(void) ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE; } - ret = usb_serial_register_drivers(&ti_usb_driver, serial_drivers); + ret = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ti_id_table_combined); if (ret == 0) printk(KERN_INFO KBUILD_MODNAME ": " TI_DRIVER_VERSION ":" TI_DRIVER_DESC "\n"); return ret; } - static void __exit ti_exit(void) { - usb_serial_deregister_drivers(&ti_usb_driver, serial_drivers); + usb_serial_deregister_drivers(serial_drivers); } - module_init(ti_init); module_exit(ti_exit); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index d1840ae..62dd922 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1364,18 +1364,19 @@ static void usb_serial_deregister(struct usb_serial_driver *device) /** * usb_serial_register_drivers - register drivers for a usb-serial module - * @udriver: usb_driver used for matching devices/interfaces * @serial_drivers: NULL-terminated array of pointers to drivers to be registered + * @name: name of the usb_driver for this set of @serial_drivers + * @id_table: list of all devices this @serial_drivers set binds to * - * Registers @udriver and all the drivers in the @serial_drivers array. - * Automatically fills in the .no_dynamic_id and PM fields in @udriver and - * the .usb_driver field in each serial driver. + * Registers all the drivers in the @serial_drivers array, and dynamically + * creates a struct usb_driver with the name @name and id_table of @id_table. */ -int usb_serial_register_drivers(struct usb_driver *udriver, - struct usb_serial_driver * const serial_drivers[]) +int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[], + const char *name, + const struct usb_device_id *id_table) { int rc; - const struct usb_device_id *saved_id_table; + struct usb_driver *udriver; struct usb_serial_driver * const *sd; /* @@ -1386,14 +1387,16 @@ int usb_serial_register_drivers(struct usb_driver *udriver, * Performance hack: We don't want udriver to be probed until * the serial drivers are registered, because the probe would * simply fail for lack of a matching serial driver. - * Therefore save off udriver's id_table until we are all set. + * So we leave udriver's id_table set to NULL until we are all set. * * Suspend/resume support is implemented in the usb-serial core, * so fill in the PM-related fields in udriver. */ - saved_id_table = udriver->id_table; - udriver->id_table = NULL; + udriver = kzalloc(sizeof(*udriver), GFP_KERNEL); + if (!udriver) + return -ENOMEM; + udriver->name = name; udriver->no_dynamic_id = 1; udriver->supports_autosuspend = 1; udriver->suspend = usb_serial_suspend; @@ -1411,8 +1414,8 @@ int usb_serial_register_drivers(struct usb_driver *udriver, goto failed; } - /* Now restore udriver's id_table and look for matches */ - udriver->id_table = saved_id_table; + /* Now set udriver's id_table and look for matches */ + udriver->id_table = id_table; rc = driver_attach(&udriver->drvwrap.driver); return 0; @@ -1426,17 +1429,20 @@ EXPORT_SYMBOL_GPL(usb_serial_register_drivers); /** * usb_serial_deregister_drivers - deregister drivers for a usb-serial module - * @udriver: usb_driver to unregister * @serial_drivers: NULL-terminated array of pointers to drivers to be deregistered * - * Deregisters @udriver and all the drivers in the @serial_drivers array. + * Deregisters all the drivers in the @serial_drivers array and deregisters and + * frees the struct usb_driver that was created by the call to + * usb_serial_register_drivers(). */ -void usb_serial_deregister_drivers(struct usb_driver *udriver, - struct usb_serial_driver * const serial_drivers[]) +void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[]) { + struct usb_driver *udriver = (*serial_drivers)->usb_driver; + for (; *serial_drivers; ++serial_drivers) usb_serial_deregister(*serial_drivers); usb_deregister(udriver); + kfree(udriver); } EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers); diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c index e22e543..5760f97 100644 --- a/drivers/usb/serial/usb_debug.c +++ b/drivers/usb/serial/usb_debug.c @@ -35,11 +35,6 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver debug_driver = { - .name = "debug", - .id_table = id_table, -}; - /* This HW really does not support a serial break, so one will be * emulated when ever the break state is set to true. */ @@ -81,5 +76,5 @@ static struct usb_serial_driver * const serial_drivers[] = { &debug_device, NULL }; -module_usb_serial_driver(debug_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 2e24bd3..f253c91 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -163,11 +163,6 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE(usb, id_table_combined); -static struct usb_driver visor_driver = { - .name = "visor", - .id_table = id_table_combined, -}; - /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ static struct usb_serial_driver handspring_device = { @@ -625,7 +620,7 @@ static int clie_5_attach(struct usb_serial *serial) return 0; } -module_usb_serial_driver(visor_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c index c7d8ab3..0c0aa87 100644 --- a/drivers/usb/serial/vivopay-serial.c +++ b/drivers/usb/serial/vivopay-serial.c @@ -25,11 +25,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver vivopay_serial_driver = { - .name = "vivopay-serial", - .id_table = id_table, -}; - static struct usb_serial_driver vivopay_serial_device = { .driver = { .owner = THIS_MODULE, @@ -43,7 +38,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &vivopay_serial_device, NULL }; -module_usb_serial_driver(vivopay_serial_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR("Forest Bond "); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 76840cd..473635e 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -77,10 +77,6 @@ static const struct usb_device_id id_table_combined[] = { MODULE_DEVICE_TABLE(usb, id_table_combined); -static struct usb_driver whiteheat_driver = { - .name = "whiteheat", - .id_table = id_table_combined, -}; /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ static int whiteheat_firmware_download(struct usb_serial *serial, @@ -914,7 +910,7 @@ static void stop_command_port(struct usb_serial *serial) mutex_unlock(&command_info->mutex); } -module_usb_serial_driver(whiteheat_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/serial/zio.c b/drivers/usb/serial/zio.c index 4822cc8..c043aa8 100644 --- a/drivers/usb/serial/zio.c +++ b/drivers/usb/serial/zio.c @@ -22,11 +22,6 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver zio_driver = { - .name = "zio", - .id_table = id_table, -}; - static struct usb_serial_driver zio_device = { .driver = { .owner = THIS_MODULE, @@ -40,5 +35,5 @@ static struct usb_serial_driver * const serial_drivers[] = { &zio_device, NULL }; -module_usb_serial_driver(zio_driver, serial_drivers); +module_usb_serial_driver(serial_drivers, id_table); MODULE_LICENSE("GPL"); diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 749836f..c9f6514 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -292,10 +292,9 @@ struct usb_serial_driver { #define to_usb_serial_driver(d) \ container_of(d, struct usb_serial_driver, driver) -extern int usb_serial_register_drivers(struct usb_driver *udriver, - struct usb_serial_driver * const serial_drivers[]); -extern void usb_serial_deregister_drivers(struct usb_driver *udriver, - struct usb_serial_driver * const serial_drivers[]); +extern int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[], + const char *name, const struct usb_device_id *id_table); +extern void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[]); extern void usb_serial_port_softint(struct usb_serial_port *port); extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); @@ -396,8 +395,8 @@ do { \ /* * module_usb_serial_driver() - Helper macro for registering a USB Serial driver - * @__usb_driver: usb_driver struct to register * @__serial_drivers: list of usb_serial drivers to register + * @__ids: all device ids that @__serial_drivers bind to * * Helper macro for USB serial drivers which do not do anything special * in module init/exit. This eliminates a lot of boilerplate. Each @@ -405,9 +404,21 @@ do { \ * module_init() and module_exit() * */ -#define module_usb_serial_driver(__usb_driver, __serial_drivers) \ - module_driver(__usb_driver, usb_serial_register_drivers, \ - usb_serial_deregister_drivers, __serial_drivers) +#define usb_serial_module_driver(__name, __serial_drivers, __ids) \ +static int __init usb_serial_module_init(void) \ +{ \ + return usb_serial_register_drivers(__serial_drivers, \ + __name, __ids); \ +} \ +module_init(usb_serial_module_init); \ +static void __exit usb_serial_module_exit(void) \ +{ \ + usb_serial_deregister_drivers(__serial_drivers); \ +} \ +module_exit(usb_serial_module_exit); + +#define module_usb_serial_driver(__serial_drivers, __ids) \ + usb_serial_module_driver(KBUILD_MODNAME, __serial_drivers, __ids) #endif /* __LINUX_USB_SERIAL_H */ -- cgit v0.10.2 From df767b71e5816692134d59c0c17e0f77cd73333d Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 8 May 2012 15:15:25 -0400 Subject: usb-storage: unusual_devs entry for Yarvik PMP400 MP4 player This patch (as1553) adds an unusual_dev entrie for the Yarvik PMP400 MP4 music player. Signed-off-by: Alan Stern Reported-by: Jesse Feddema Tested-by: Jesse Feddema Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 856ad92..8f3cbb8 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1885,6 +1885,13 @@ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Jesse Feddema */ +UNUSUAL_DEV( 0x177f, 0x0400, 0x0000, 0x0000, + "Yarvik", + "PMP400", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ), + /* Reported by Hans de Goede * These Appotech controllers are found in Picture Frames, they provide a * (buggy) emulation of a cdrom drive which contains the windows software -- cgit v0.10.2 From 1155a7b8315bc60e43ee67e2e0e32e536f3a2a93 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 8 May 2012 23:28:57 +0300 Subject: usb: gadget: ci13xxx: drop needless parens Small and self-evident cleanup. Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 3a45339..992ce11 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -1760,14 +1760,14 @@ __acquires(mEp->lock) if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { /* Assume that device is bus powered for now. */ - *((u16 *)req->buf) = _udc->remote_wakeup << 1; + *(u16 *)req->buf = _udc->remote_wakeup << 1; retval = 0; } else if ((setup->bRequestType & USB_RECIP_MASK) \ == USB_RECIP_ENDPOINT) { dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? TX : RX; num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK; - *((u16 *)req->buf) = hw_ep_get_halt(num, dir); + *(u16 *)req->buf = hw_ep_get_halt(num, dir); } /* else do nothing; reserved for future use */ @@ -2284,8 +2284,8 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, goto done; } - if (req->length > (4 * CI13XXX_PAGE_SIZE)) { - req->length = (4 * CI13XXX_PAGE_SIZE); + if (req->length > 4 * CI13XXX_PAGE_SIZE) { + req->length = 4 * CI13XXX_PAGE_SIZE; retval = -EMSGSIZE; warn("request length truncated"); } diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h index 66f41a3..926cd68 100644 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -20,10 +20,10 @@ * DEFINE *****************************************************************************/ #define CI13XXX_PAGE_SIZE 4096ul /* page size for TD's */ -#define ENDPT_MAX (32) -#define CTRL_PAYLOAD_MAX (64) -#define RX (0) /* similar to USB_DIR_OUT but can be used as an index */ -#define TX (1) /* similar to USB_DIR_IN but can be used as an index */ +#define ENDPT_MAX 32 +#define CTRL_PAYLOAD_MAX 64 +#define RX 0 /* similar to USB_DIR_OUT but can be used as an index */ +#define TX 1 /* similar to USB_DIR_IN but can be used as an index */ /****************************************************************************** * STRUCTURES -- cgit v0.10.2 From d3595d132b9f8641501fcc84d831a5d6fed2b29d Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 8 May 2012 23:28:58 +0300 Subject: usb: gadget: ci13xxx: move global variables inside struct ci13xxx Make global variables that are specific for each UDC instance part of struct ci13xxx. Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 992ce11..0273970 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -74,9 +74,6 @@ #define DMA_ADDR_INVALID (~(dma_addr_t)0) -/* ctrl register bank access */ -static DEFINE_SPINLOCK(udc_lock); - /* control endpoint description */ static const struct usb_endpoint_descriptor ctrl_endpt_out_desc = { @@ -134,14 +131,6 @@ static int ffs_nr(u32 x) /****************************************************************************** * HW block *****************************************************************************/ -/* register bank descriptor */ -static struct { - unsigned lpm; /* is LPM? */ - void __iomem *abs; /* bus map offset */ - void __iomem *cap; /* bus map offset + CAP offset */ - void __iomem *op; /* bus map offset + OP offset */ - size_t size; /* bank size */ -} hw_bank; /* MSM specific */ #define ABS_AHBBURST (0x0090UL) @@ -150,7 +139,7 @@ static struct { #define CAP_CAPLENGTH (0x000UL) #define CAP_HCCPARAMS (0x008UL) #define CAP_DCCPARAMS (0x024UL) -#define ABS_TESTMODE (hw_bank.lpm ? 0x0FCUL : 0x138UL) +#define ABS_TESTMODE (udc->hw_bank.lpm ? 0x0FCUL : 0x138UL) /* offset to CAPLENTGH (addr + data) */ #define OP_USBCMD (0x000UL) #define OP_USBSTS (0x004UL) @@ -159,17 +148,14 @@ static struct { #define OP_ENDPTLISTADDR (0x018UL) #define OP_PORTSC (0x044UL) #define OP_DEVLC (0x084UL) -#define OP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL) -#define OP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL) -#define OP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL) -#define OP_ENDPTFLUSH (hw_bank.lpm ? 0x0E0UL : 0x074UL) -#define OP_ENDPTSTAT (hw_bank.lpm ? 0x0E4UL : 0x078UL) -#define OP_ENDPTCOMPLETE (hw_bank.lpm ? 0x0E8UL : 0x07CUL) -#define OP_ENDPTCTRL (hw_bank.lpm ? 0x0ECUL : 0x080UL) -#define OP_LAST (hw_bank.lpm ? 0x12CUL : 0x0C0UL) - -/* maximum number of enpoints: valid only after hw_device_reset() */ -static unsigned hw_ep_max; +#define OP_USBMODE (udc->hw_bank.lpm ? 0x0C8UL : 0x068UL) +#define OP_ENDPTSETUPSTAT (udc->hw_bank.lpm ? 0x0D8UL : 0x06CUL) +#define OP_ENDPTPRIME (udc->hw_bank.lpm ? 0x0DCUL : 0x070UL) +#define OP_ENDPTFLUSH (udc->hw_bank.lpm ? 0x0E0UL : 0x074UL) +#define OP_ENDPTSTAT (udc->hw_bank.lpm ? 0x0E4UL : 0x078UL) +#define OP_ENDPTCOMPLETE (udc->hw_bank.lpm ? 0x0E8UL : 0x07CUL) +#define OP_ENDPTCTRL (udc->hw_bank.lpm ? 0x0ECUL : 0x080UL) +#define OP_LAST (udc->hw_bank.lpm ? 0x12CUL : 0x0C0UL) /** * hw_ep_bit: calculates the bit number @@ -183,11 +169,11 @@ static inline int hw_ep_bit(int num, int dir) return num + (dir ? 16 : 0); } -static int ep_to_bit(int n) +static int ep_to_bit(struct ci13xxx *udc, int n) { - int fill = 16 - hw_ep_max / 2; + int fill = 16 - udc->hw_ep_max / 2; - if (n >= hw_ep_max / 2) + if (n >= udc->hw_ep_max / 2) n += fill; return n; @@ -252,29 +238,30 @@ static u32 hw_test_and_write(void __iomem *base, u32 addr, u32 mask, u32 data) return (reg & mask) >> ffs_nr(mask); } -static int hw_device_init(void __iomem *base, uintptr_t cap_offset) +static int hw_device_init(struct ci13xxx *udc, void __iomem *base, + uintptr_t cap_offset) { u32 reg; /* bank is a module variable */ - hw_bank.abs = base; + udc->hw_bank.abs = base; - hw_bank.cap = hw_bank.abs; - hw_bank.cap += cap_offset; - hw_bank.op = hw_bank.cap + ioread8(hw_bank.cap); + udc->hw_bank.cap = udc->hw_bank.abs; + udc->hw_bank.cap += cap_offset; + udc->hw_bank.op = udc->hw_bank.cap + ioread8(udc->hw_bank.cap); - reg = hw_read(hw_bank.cap, CAP_HCCPARAMS, HCCPARAMS_LEN) >> + reg = hw_read(udc->hw_bank.cap, CAP_HCCPARAMS, HCCPARAMS_LEN) >> ffs_nr(HCCPARAMS_LEN); - hw_bank.lpm = reg; - hw_bank.size = hw_bank.op - hw_bank.abs; - hw_bank.size += OP_LAST; - hw_bank.size /= sizeof(u32); + udc->hw_bank.lpm = reg; + udc->hw_bank.size = udc->hw_bank.op - udc->hw_bank.abs; + udc->hw_bank.size += OP_LAST; + udc->hw_bank.size /= sizeof(u32); - reg = hw_read(hw_bank.cap, CAP_DCCPARAMS, DCCPARAMS_DEN) >> + reg = hw_read(udc->hw_bank.cap, CAP_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN); - hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ + udc->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ - if (hw_ep_max == 0 || hw_ep_max > ENDPT_MAX) + if (udc->hw_ep_max == 0 || udc->hw_ep_max > ENDPT_MAX) return -ENODEV; /* setup lock mode ? */ @@ -294,11 +281,11 @@ static int hw_device_init(void __iomem *base, uintptr_t cap_offset) static int hw_device_reset(struct ci13xxx *udc) { /* should flush & stop before reset */ - hw_write(hw_bank.op, OP_ENDPTFLUSH, ~0, ~0); - hw_write(hw_bank.op, OP_USBCMD, USBCMD_RS, 0); + hw_write(udc->hw_bank.op, OP_ENDPTFLUSH, ~0, ~0); + hw_write(udc->hw_bank.op, OP_USBCMD, USBCMD_RS, 0); - hw_write(hw_bank.op, OP_USBCMD, USBCMD_RST, USBCMD_RST); - while (hw_read(hw_bank.op, OP_USBCMD, USBCMD_RST)) + hw_write(udc->hw_bank.op, OP_USBCMD, USBCMD_RST, USBCMD_RST); + while (hw_read(udc->hw_bank.op, OP_USBCMD, USBCMD_RST)) udelay(10); /* not RTOS friendly */ @@ -307,17 +294,19 @@ static int hw_device_reset(struct ci13xxx *udc) CI13XXX_CONTROLLER_RESET_EVENT); if (udc->udc_driver->flags & CI13XXX_DISABLE_STREAMING) - hw_write(hw_bank.op, OP_USBMODE, USBMODE_SDIS, USBMODE_SDIS); + hw_write(udc->hw_bank.op, OP_USBMODE, USBMODE_SDIS, + USBMODE_SDIS); /* USBMODE should be configured step by step */ - hw_write(hw_bank.op, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); - hw_write(hw_bank.op, OP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE); + hw_write(udc->hw_bank.op, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); + hw_write(udc->hw_bank.op, OP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE); /* HW >= 2.3 */ - hw_write(hw_bank.op, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); + hw_write(udc->hw_bank.op, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); - if (hw_read(hw_bank.op, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DEVICE) { + if (hw_read(udc->hw_bank.op, OP_USBMODE, USBMODE_CM) != + USBMODE_CM_DEVICE) { pr_err("cannot enter in device mode"); - pr_err("lpm = %i", hw_bank.lpm); + pr_err("lpm = %i", udc->hw_bank.lpm); return -ENODEV; } @@ -331,17 +320,17 @@ static int hw_device_reset(struct ci13xxx *udc) * * This function returns an error code */ -static int hw_device_state(u32 dma) +static int hw_device_state(struct ci13xxx *udc, u32 dma) { if (dma) { - hw_write(hw_bank.op, OP_ENDPTLISTADDR, ~0, dma); + hw_write(udc->hw_bank.op, OP_ENDPTLISTADDR, ~0, dma); /* interrupt, error, port change, reset, sleep/suspend */ - hw_write(hw_bank.op, OP_USBINTR, ~0, + hw_write(udc->hw_bank.op, OP_USBINTR, ~0, USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); - hw_write(hw_bank.op, OP_USBCMD, USBCMD_RS, USBCMD_RS); + hw_write(udc->hw_bank.op, OP_USBCMD, USBCMD_RS, USBCMD_RS); } else { - hw_write(hw_bank.op, OP_USBCMD, USBCMD_RS, 0); - hw_write(hw_bank.op, OP_USBINTR, ~0, 0); + hw_write(udc->hw_bank.op, OP_USBCMD, USBCMD_RS, 0); + hw_write(udc->hw_bank.op, OP_USBINTR, ~0, 0); } return 0; } @@ -353,16 +342,16 @@ static int hw_device_state(u32 dma) * * This function returns an error code */ -static int hw_ep_flush(int num, int dir) +static int hw_ep_flush(struct ci13xxx *udc, int num, int dir) { int n = hw_ep_bit(num, dir); do { /* flush any pending transfer */ - hw_write(hw_bank.op, OP_ENDPTFLUSH, BIT(n), BIT(n)); - while (hw_read(hw_bank.op, OP_ENDPTFLUSH, BIT(n))) + hw_write(udc->hw_bank.op, OP_ENDPTFLUSH, BIT(n), BIT(n)); + while (hw_read(udc->hw_bank.op, OP_ENDPTFLUSH, BIT(n))) cpu_relax(); - } while (hw_read(hw_bank.op, OP_ENDPTSTAT, BIT(n))); + } while (hw_read(udc->hw_bank.op, OP_ENDPTSTAT, BIT(n))); return 0; } @@ -374,11 +363,11 @@ static int hw_ep_flush(int num, int dir) * * This function returns an error code */ -static int hw_ep_disable(int num, int dir) +static int hw_ep_disable(struct ci13xxx *udc, int num, int dir) { - hw_ep_flush(num, dir); - hw_write(hw_bank.op, OP_ENDPTCTRL + num * sizeof(u32), - dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); + hw_ep_flush(udc, num, dir); + hw_write(udc->hw_bank.op, OP_ENDPTCTRL + num * sizeof(u32), + dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); return 0; } @@ -390,7 +379,7 @@ static int hw_ep_disable(int num, int dir) * * This function returns an error code */ -static int hw_ep_enable(int num, int dir, int type) +static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type) { u32 mask, data; @@ -413,7 +402,7 @@ static int hw_ep_enable(int num, int dir, int type) mask |= ENDPTCTRL_RXE; /* enable */ data |= ENDPTCTRL_RXE; } - hw_write(hw_bank.op, OP_ENDPTCTRL + num * sizeof(u32), mask, data); + hw_write(udc->hw_bank.op, OP_ENDPTCTRL + num * sizeof(u32), mask, data); return 0; } @@ -424,11 +413,12 @@ static int hw_ep_enable(int num, int dir, int type) * * This function returns 1 if endpoint halted */ -static int hw_ep_get_halt(int num, int dir) +static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir) { u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; - return !!hw_read(hw_bank.op, OP_ENDPTCTRL + num * sizeof(u32), mask); + return !!hw_read(udc->hw_bank.op, OP_ENDPTCTRL + num * sizeof(u32), + mask); } /** @@ -438,10 +428,10 @@ static int hw_ep_get_halt(int num, int dir) * * This function returns setup status */ -static int hw_test_and_clear_setup_status(int n) +static int hw_test_and_clear_setup_status(struct ci13xxx *udc, int n) { - n = ep_to_bit(n); - return hw_test_and_clear(hw_bank.op, OP_ENDPTSETUPSTAT, BIT(n)); + n = ep_to_bit(udc, n); + return hw_test_and_clear(udc->hw_bank.op, OP_ENDPTSETUPSTAT, BIT(n)); } /** @@ -452,20 +442,20 @@ static int hw_test_and_clear_setup_status(int n) * * This function returns an error code */ -static int hw_ep_prime(int num, int dir, int is_ctrl) +static int hw_ep_prime(struct ci13xxx *udc, int num, int dir, int is_ctrl) { int n = hw_ep_bit(num, dir); if (is_ctrl && dir == RX && - hw_read(hw_bank.op, OP_ENDPTSETUPSTAT, BIT(num))) + hw_read(udc->hw_bank.op, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; - hw_write(hw_bank.op, OP_ENDPTPRIME, BIT(n), BIT(n)); + hw_write(udc->hw_bank.op, OP_ENDPTPRIME, BIT(n), BIT(n)); - while (hw_read(hw_bank.op, OP_ENDPTPRIME, BIT(n))) + while (hw_read(udc->hw_bank.op, OP_ENDPTPRIME, BIT(n))) cpu_relax(); if (is_ctrl && dir == RX && - hw_read(hw_bank.op, OP_ENDPTSETUPSTAT, BIT(num))) + hw_read(udc->hw_bank.op, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; /* status shoult be tested according with manual but it doesn't work */ @@ -481,7 +471,7 @@ static int hw_ep_prime(int num, int dir, int is_ctrl) * * This function returns an error code */ -static int hw_ep_set_halt(int num, int dir, int value) +static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value) { if (value != 0 && value != 1) return -EINVAL; @@ -492,10 +482,10 @@ static int hw_ep_set_halt(int num, int dir, int value) u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; /* data toggle - reserved for EP0 but it's in ESS */ - hw_write(hw_bank.op, addr, mask_xs|mask_xr, + hw_write(udc->hw_bank.op, addr, mask_xs|mask_xr, value ? mask_xs : mask_xr); - } while (value != hw_ep_get_halt(num, dir)); + } while (value != hw_ep_get_halt(udc, num, dir)); return 0; } @@ -507,13 +497,14 @@ static int hw_ep_set_halt(int num, int dir, int value) * * This function returns an error code */ -static int hw_intr_clear(int n) +static int hw_intr_clear(struct ci13xxx *udc, int n) { if (n >= REG_BITS) return -EINVAL; - hw_write(hw_bank.op, OP_USBINTR, BIT(n), 0); - hw_write(hw_bank.op, OP_USBSTS, BIT(n), BIT(n)); + hw_write(udc->hw_bank.op, OP_USBINTR, BIT(n), 0); + hw_write(udc->hw_bank.op, OP_USBSTS, BIT(n), BIT(n)); + return 0; } @@ -524,15 +515,16 @@ static int hw_intr_clear(int n) * * This function returns an error code */ -static int hw_intr_force(int n) +static int hw_intr_force(struct ci13xxx *udc, int n) { if (n >= REG_BITS) return -EINVAL; - hw_write(hw_bank.cap, ABS_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE); - hw_write(hw_bank.op, OP_USBINTR, BIT(n), BIT(n)); - hw_write(hw_bank.op, OP_USBSTS, BIT(n), BIT(n)); - hw_write(hw_bank.cap, ABS_TESTMODE, TESTMODE_FORCE, 0); + hw_write(udc->hw_bank.cap, ABS_TESTMODE, TESTMODE_FORCE, + TESTMODE_FORCE); + hw_write(udc->hw_bank.op, OP_USBINTR, BIT(n), BIT(n)); + hw_write(udc->hw_bank.op, OP_USBSTS, BIT(n), BIT(n)); + hw_write(udc->hw_bank.cap, ABS_TESTMODE, TESTMODE_FORCE, 0); return 0; } @@ -541,10 +533,11 @@ static int hw_intr_force(int n) * * This function returns true if high speed port */ -static int hw_port_is_high_speed(void) +static int hw_port_is_high_speed(struct ci13xxx *udc) { - return hw_bank.lpm ? hw_read(hw_bank.op, OP_DEVLC, DEVLC_PSPD) : - hw_read(hw_bank.op, OP_PORTSC, PORTSC_HSP); + return udc->hw_bank.lpm + ? hw_read(udc->hw_bank.op, OP_DEVLC, DEVLC_PSPD) + : hw_read(udc->hw_bank.op, OP_PORTSC, PORTSC_HSP); } /** @@ -552,9 +545,10 @@ static int hw_port_is_high_speed(void) * * This function returns port test mode value */ -static u8 hw_port_test_get(void) +static u8 hw_port_test_get(struct ci13xxx *udc) { - return hw_read(hw_bank.op, OP_PORTSC, PORTSC_PTC) >> ffs_nr(PORTSC_PTC); + return hw_read(udc->hw_bank.op, OP_PORTSC, PORTSC_PTC) >> + ffs_nr(PORTSC_PTC); } /** @@ -563,14 +557,15 @@ static u8 hw_port_test_get(void) * * This function returns an error code */ -static int hw_port_test_set(u8 mode) +static int hw_port_test_set(struct ci13xxx *udc, u8 mode) { const u8 TEST_MODE_MAX = 7; if (mode > TEST_MODE_MAX) return -EINVAL; - hw_write(hw_bank.op, OP_PORTSC, PORTSC_PTC, mode << ffs_nr(PORTSC_PTC)); + hw_write(udc->hw_bank.op, OP_PORTSC, PORTSC_PTC, + mode << ffs_nr(PORTSC_PTC)); return 0; } @@ -579,9 +574,9 @@ static int hw_port_test_set(u8 mode) * * This function returns register data */ -static u32 hw_read_intr_enable(void) +static u32 hw_read_intr_enable(struct ci13xxx *udc) { - return hw_read(hw_bank.op, OP_USBINTR, ~0); + return hw_read(udc->hw_bank.op, OP_USBINTR, ~0); } /** @@ -589,9 +584,9 @@ static u32 hw_read_intr_enable(void) * * This function returns register data */ -static u32 hw_read_intr_status(void) +static u32 hw_read_intr_status(struct ci13xxx *udc) { - return hw_read(hw_bank.op, OP_USBSTS, ~0); + return hw_read(udc->hw_bank.op, OP_USBSTS, ~0); } /** @@ -601,15 +596,15 @@ static u32 hw_read_intr_status(void) * * This function returns number of registers read */ -static size_t hw_register_read(u32 *buf, size_t size) +static size_t hw_register_read(struct ci13xxx *udc, u32 *buf, size_t size) { unsigned i; - if (size > hw_bank.size) - size = hw_bank.size; + if (size > udc->hw_bank.size) + size = udc->hw_bank.size; for (i = 0; i < size; i++) - buf[i] = hw_read(hw_bank.cap, i * sizeof(u32), ~0); + buf[i] = hw_read(udc->hw_bank.cap, i * sizeof(u32), ~0); return size; } @@ -621,18 +616,18 @@ static size_t hw_register_read(u32 *buf, size_t size) * * This function returns an error code */ -static int hw_register_write(u16 addr, u32 data) +static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data) { /* align */ addr /= sizeof(u32); - if (addr >= hw_bank.size) + if (addr >= udc->hw_bank.size) return -EINVAL; /* align */ addr *= sizeof(u32); - hw_write(hw_bank.cap, addr, ~0, data); + hw_write(udc->hw_bank.cap, addr, ~0, data); return 0; } @@ -643,10 +638,10 @@ static int hw_register_write(u16 addr, u32 data) * * This function returns complete status */ -static int hw_test_and_clear_complete(int n) +static int hw_test_and_clear_complete(struct ci13xxx *udc, int n) { - n = ep_to_bit(n); - return hw_test_and_clear(hw_bank.op, OP_ENDPTCOMPLETE, BIT(n)); + n = ep_to_bit(udc, n); + return hw_test_and_clear(udc->hw_bank.op, OP_ENDPTCOMPLETE, BIT(n)); } /** @@ -655,11 +650,11 @@ static int hw_test_and_clear_complete(int n) * * This function returns active interrutps */ -static u32 hw_test_and_clear_intr_active(void) +static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc) { - u32 reg = hw_read_intr_status() & hw_read_intr_enable(); + u32 reg = hw_read_intr_status(udc) & hw_read_intr_enable(udc); - hw_write(hw_bank.op, OP_USBSTS, ~0, reg); + hw_write(udc->hw_bank.op, OP_USBSTS, ~0, reg); return reg; } @@ -669,9 +664,9 @@ static u32 hw_test_and_clear_intr_active(void) * * This function returns guard value */ -static int hw_test_and_clear_setup_guard(void) +static int hw_test_and_clear_setup_guard(struct ci13xxx *udc) { - return hw_test_and_write(hw_bank.op, OP_USBCMD, USBCMD_SUTW, 0); + return hw_test_and_write(udc->hw_bank.op, OP_USBCMD, USBCMD_SUTW, 0); } /** @@ -680,9 +675,9 @@ static int hw_test_and_clear_setup_guard(void) * * This function returns guard value */ -static int hw_test_and_set_setup_guard(void) +static int hw_test_and_set_setup_guard(struct ci13xxx *udc) { - return hw_test_and_write(hw_bank.op, OP_USBCMD, USBCMD_SUTW, + return hw_test_and_write(udc->hw_bank.op, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); } @@ -692,10 +687,10 @@ static int hw_test_and_set_setup_guard(void) * * This function returns an error code */ -static int hw_usb_set_address(u8 value) +static int hw_usb_set_address(struct ci13xxx *udc, u8 value) { /* advance */ - hw_write(hw_bank.op, OP_DEVICEADDR, + hw_write(udc->hw_bank.op, OP_DEVICEADDR, DEVICEADDR_USBADR | DEVICEADDR_USBADRA, value << ffs_nr(DEVICEADDR_USBADR) | DEVICEADDR_USBADRA); return 0; @@ -707,21 +702,21 @@ static int hw_usb_set_address(u8 value) * * This function returns an error code */ -static int hw_usb_reset(void) +static int hw_usb_reset(struct ci13xxx *udc) { - hw_usb_set_address(0); + hw_usb_set_address(udc, 0); /* ESS flushes only at end?!? */ - hw_write(hw_bank.op, OP_ENDPTFLUSH, ~0, ~0); + hw_write(udc->hw_bank.op, OP_ENDPTFLUSH, ~0, ~0); /* clear setup token semaphores */ - hw_write(hw_bank.op, OP_ENDPTSETUPSTAT, 0, 0); + hw_write(udc->hw_bank.op, OP_ENDPTSETUPSTAT, 0, 0); /* clear complete status */ - hw_write(hw_bank.op, OP_ENDPTCOMPLETE, 0, 0); + hw_write(udc->hw_bank.op, OP_ENDPTCOMPLETE, 0, 0); /* wait until all bits cleared */ - while (hw_read(hw_bank.op, OP_ENDPTPRIME, ~0)) + while (hw_read(udc->hw_bank.op, OP_ENDPTPRIME, ~0)) udelay(10); /* not RTOS friendly */ /* reset all endpoints ? */ @@ -1023,12 +1018,12 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr, return 0; } - spin_lock_irqsave(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); n += scnprintf(buf + n, PAGE_SIZE - n, - "status = %08x\n", hw_read_intr_status()); + "status = %08x\n", hw_read_intr_status(udc)); n += scnprintf(buf + n, PAGE_SIZE - n, - "enable = %08x\n", hw_read_intr_enable()); + "enable = %08x\n", hw_read_intr_enable(udc)); n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n", isr_statistics.test); @@ -1072,7 +1067,7 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr, n += scnprintf(buf + n, PAGE_SIZE - n, "\n"); } - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); return n; } @@ -1101,17 +1096,17 @@ static ssize_t store_inters(struct device *dev, struct device_attribute *attr, goto done; } - spin_lock_irqsave(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); if (en) { - if (hw_intr_force(bit)) + if (hw_intr_force(udc, bit)) dev_err(dev, "invalid bit number\n"); else isr_statistics.test++; } else { - if (hw_intr_clear(bit)) + if (hw_intr_clear(udc, bit)) dev_err(dev, "invalid bit number\n"); } - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); done: return count; @@ -1136,9 +1131,9 @@ static ssize_t show_port_test(struct device *dev, return 0; } - spin_lock_irqsave(udc->lock, flags); - mode = hw_port_test_get(); - spin_unlock_irqrestore(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); + mode = hw_port_test_get(udc); + spin_unlock_irqrestore(&udc->lock, flags); return scnprintf(buf, PAGE_SIZE, "mode = %u\n", mode); } @@ -1167,10 +1162,10 @@ static ssize_t store_port_test(struct device *dev, goto done; } - spin_lock_irqsave(udc->lock, flags); - if (hw_port_test_set(mode)) + spin_lock_irqsave(&udc->lock, flags); + if (hw_port_test_set(udc, mode)) dev_err(dev, "invalid mode\n"); - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); done: return count; @@ -1196,10 +1191,11 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, return 0; } - spin_lock_irqsave(udc->lock, flags); - for (i = 0; i < hw_ep_max/2; i++) { + spin_lock_irqsave(&udc->lock, flags); + for (i = 0; i < udc->hw_ep_max/2; i++) { struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i]; - struct ci13xxx_ep *mEpTx = &udc->ci13xxx_ep[i + hw_ep_max/2]; + struct ci13xxx_ep *mEpTx = + &udc->ci13xxx_ep[i + udc->hw_ep_max/2]; n += scnprintf(buf + n, PAGE_SIZE - n, "EP=%02i: RX=%08X TX=%08X\n", i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma); @@ -1210,7 +1206,7 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, *((u32 *)mEpTx->qh.ptr + j)); } } - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); return n; } @@ -1242,9 +1238,9 @@ static ssize_t show_registers(struct device *dev, return 0; } - spin_lock_irqsave(udc->lock, flags); - k = hw_register_read(dump, DUMP_ENTRIES); - spin_unlock_irqrestore(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); + k = hw_register_read(udc, dump, DUMP_ENTRIES); + spin_unlock_irqrestore(&udc->lock, flags); for (i = 0; i < k; i++) { n += scnprintf(buf + n, PAGE_SIZE - n, @@ -1279,10 +1275,10 @@ static ssize_t store_registers(struct device *dev, goto done; } - spin_lock_irqsave(udc->lock, flags); - if (hw_register_write(addr, data)) + spin_lock_irqsave(&udc->lock, flags); + if (hw_register_write(udc, addr, data)) dev_err(dev, "invalid address range\n"); - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); done: return count; @@ -1310,23 +1306,23 @@ static ssize_t show_requests(struct device *dev, struct device_attribute *attr, return 0; } - spin_lock_irqsave(udc->lock, flags); - for (i = 0; i < hw_ep_max; i++) + spin_lock_irqsave(&udc->lock, flags); + for (i = 0; i < udc->hw_ep_max; i++) list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue) { req = list_entry(ptr, struct ci13xxx_req, queue); n += scnprintf(buf + n, PAGE_SIZE - n, "EP=%02i: TD=%08X %s\n", - i % hw_ep_max/2, (u32)req->dma, - ((i < hw_ep_max/2) ? "RX" : "TX")); + i % udc->hw_ep_max/2, (u32)req->dma, + ((i < udc->hw_ep_max/2) ? "RX" : "TX")); for (j = 0; j < qSize; j++) n += scnprintf(buf + n, PAGE_SIZE - n, " %04X: %08X\n", j, *((u32 *)req->ptr + j)); } - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); return n; } @@ -1430,6 +1426,7 @@ static inline u8 _usb_addr(struct ci13xxx_ep *ep) */ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) { + struct ci13xxx *udc = mEp->udc; unsigned i; int ret = 0; unsigned length = mReq->req.length; @@ -1503,14 +1500,15 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) else mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK; wmb(); - if (hw_read(hw_bank.op, OP_ENDPTPRIME, BIT(n))) + if (hw_read(udc->hw_bank.op, OP_ENDPTPRIME, BIT(n))) goto done; do { - hw_write(hw_bank.op, OP_USBCMD, USBCMD_ATDTW, + hw_write(udc->hw_bank.op, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); - tmp_stat = hw_read(hw_bank.op, OP_ENDPTSTAT, BIT(n)); - } while (!hw_read(hw_bank.op, OP_USBCMD, USBCMD_ATDTW)); - hw_write(hw_bank.op, OP_USBCMD, USBCMD_ATDTW, 0); + tmp_stat = hw_read(udc->hw_bank.op, OP_ENDPTSTAT, + BIT(n)); + } while (!hw_read(udc->hw_bank.op, OP_USBCMD, USBCMD_ATDTW)); + hw_write(udc->hw_bank.op, OP_USBCMD, USBCMD_ATDTW, 0); if (tmp_stat) goto done; } @@ -1522,7 +1520,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) wmb(); /* synchronize before ep prime */ - ret = hw_ep_prime(mEp->num, mEp->dir, + ret = hw_ep_prime(udc, mEp->num, mEp->dir, mEp->type == USB_ENDPOINT_XFER_CONTROL); done: return ret; @@ -1593,7 +1591,7 @@ __acquires(mEp->lock) if (mEp == NULL) return -EINVAL; - hw_ep_flush(mEp->num, mEp->dir); + hw_ep_flush(mEp->udc, mEp->num, mEp->dir); while (!list_empty(&mEp->qh.queue)) { @@ -1630,11 +1628,11 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) if (gadget == NULL) return -EINVAL; - spin_lock_irqsave(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); udc->gadget.speed = USB_SPEED_UNKNOWN; udc->remote_wakeup = 0; udc->suspended = 0; - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); /* flush all endpoints */ gadget_for_each_ep(ep, gadget) { @@ -1682,12 +1680,12 @@ __acquires(udc->lock) dbg_event(0xFF, "BUS RST", 0); - spin_unlock(udc->lock); + spin_unlock(&udc->lock); retval = _gadget_stop_activity(&udc->gadget); if (retval) goto done; - retval = hw_usb_reset(); + retval = hw_usb_reset(udc); if (retval) goto done; @@ -1695,7 +1693,7 @@ __acquires(udc->lock) if (udc->status == NULL) retval = -ENOMEM; - spin_lock(udc->lock); + spin_lock(&udc->lock); done: if (retval) @@ -1767,7 +1765,7 @@ __acquires(mEp->lock) dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? TX : RX; num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK; - *(u16 *)req->buf = hw_ep_get_halt(num, dir); + *(u16 *)req->buf = hw_ep_get_halt(udc, num, dir); } /* else do nothing; reserved for future use */ @@ -1804,10 +1802,10 @@ isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) trace("%p, %p", ep, req); - spin_lock_irqsave(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); if (udc->test_mode) - hw_port_test_set(udc->test_mode); - spin_unlock_irqrestore(udc->lock, flags); + hw_port_test_set(udc, udc->test_mode); + spin_unlock_irqrestore(&udc->lock, flags); } /** @@ -1901,7 +1899,7 @@ __acquires(udc->lock) return; } - for (i = 0; i < hw_ep_max; i++) { + for (i = 0; i < udc->hw_ep_max; i++) { struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; int type, num, dir, err = -EINVAL; struct usb_ctrlrequest req; @@ -1909,7 +1907,7 @@ __acquires(udc->lock) if (mEp->ep.desc == NULL) continue; /* not configured */ - if (hw_test_and_clear_complete(i)) { + if (hw_test_and_clear_complete(udc, i)) { err = isr_tr_complete_low(mEp); if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { if (err > 0) /* needs status phase */ @@ -1917,17 +1915,17 @@ __acquires(udc->lock) if (err < 0) { dbg_event(_usb_addr(mEp), "ERROR", err); - spin_unlock(udc->lock); + spin_unlock(&udc->lock); if (usb_ep_set_halt(&mEp->ep)) dev_err(&udc->gadget.dev, "error: ep_set_halt\n"); - spin_lock(udc->lock); + spin_lock(&udc->lock); } } } if (mEp->type != USB_ENDPOINT_XFER_CONTROL || - !hw_test_and_clear_setup_status(i)) + !hw_test_and_clear_setup_status(udc, i)) continue; if (i != 0) { @@ -1945,9 +1943,9 @@ __acquires(udc->lock) /* read_setup_packet */ do { - hw_test_and_set_setup_guard(); + hw_test_and_set_setup_guard(udc); memcpy(&req, &mEp->qh.ptr->setup, sizeof(req)); - } while (!hw_test_and_clear_setup_guard()); + } while (!hw_test_and_clear_setup_guard(udc)); type = req.bRequestType; @@ -1966,12 +1964,12 @@ __acquires(udc->lock) dir = num & USB_ENDPOINT_DIR_MASK; num &= USB_ENDPOINT_NUMBER_MASK; if (dir) /* TX */ - num += hw_ep_max/2; + num += udc->hw_ep_max/2; if (!udc->ci13xxx_ep[num].wedge) { - spin_unlock(udc->lock); + spin_unlock(&udc->lock); err = usb_ep_clear_halt( &udc->ci13xxx_ep[num].ep); - spin_lock(udc->lock); + spin_lock(&udc->lock); if (err) break; } @@ -2003,7 +2001,8 @@ __acquires(udc->lock) if (le16_to_cpu(req.wLength) != 0 || le16_to_cpu(req.wIndex) != 0) break; - err = hw_usb_set_address((u8)le16_to_cpu(req.wValue)); + err = hw_usb_set_address(udc, + (u8)le16_to_cpu(req.wValue)); if (err) break; err = isr_setup_status_phase(udc); @@ -2018,11 +2017,11 @@ __acquires(udc->lock) dir = num & USB_ENDPOINT_DIR_MASK; num &= USB_ENDPOINT_NUMBER_MASK; if (dir) /* TX */ - num += hw_ep_max/2; + num += udc->hw_ep_max/2; - spin_unlock(udc->lock); + spin_unlock(&udc->lock); err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep); - spin_lock(udc->lock); + spin_lock(&udc->lock); if (!err) isr_setup_status_phase(udc); } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) { @@ -2060,20 +2059,20 @@ delegate: if (req.wLength == 0) /* no data phase */ udc->ep0_dir = TX; - spin_unlock(udc->lock); + spin_unlock(&udc->lock); err = udc->driver->setup(&udc->gadget, &req); - spin_lock(udc->lock); + spin_lock(&udc->lock); break; } if (err < 0) { dbg_event(_usb_addr(mEp), "ERROR", err); - spin_unlock(udc->lock); + spin_unlock(&udc->lock); if (usb_ep_set_halt(&mEp->ep)) dev_err(&udc->gadget.dev, "error: ep_set_halt\n"); - spin_lock(udc->lock); + spin_lock(&udc->lock); } } } @@ -2133,7 +2132,7 @@ static int ep_enable(struct usb_ep *ep, * is always enabled */ if (mEp->num) - retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type); + retval |= hw_ep_enable(mEp->udc, mEp->num, mEp->dir, mEp->type); spin_unlock_irqrestore(mEp->lock, flags); return retval; @@ -2166,7 +2165,7 @@ static int ep_disable(struct usb_ep *ep) dbg_event(_usb_addr(mEp), "DISABLE", 0); retval |= _ep_nuke(mEp); - retval |= hw_ep_disable(mEp->num, mEp->dir); + retval |= hw_ep_disable(mEp->udc, mEp->num, mEp->dir); if (mEp->type == USB_ENDPOINT_XFER_CONTROL) mEp->dir = (mEp->dir == TX) ? RX : TX; @@ -2332,7 +2331,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) dbg_event(_usb_addr(mEp), "DEQUEUE", 0); - hw_ep_flush(mEp->num, mEp->dir); + hw_ep_flush(mEp->udc, mEp->num, mEp->dir); /* pop request */ list_del_init(&mReq->queue); @@ -2384,7 +2383,7 @@ static int ep_set_halt(struct usb_ep *ep, int value) direction = mEp->dir; do { dbg_event(_usb_addr(mEp), "HALT", value); - retval |= hw_ep_set_halt(mEp->num, mEp->dir, value); + retval |= hw_ep_set_halt(mEp->udc, mEp->num, mEp->dir, value); if (!value) mEp->wedge = 0; @@ -2443,7 +2442,7 @@ static void ep_fifo_flush(struct usb_ep *ep) spin_lock_irqsave(mEp->lock, flags); dbg_event(_usb_addr(mEp), "FFLUSH", 0); - hw_ep_flush(mEp->num, mEp->dir); + hw_ep_flush(mEp->udc, mEp->num, mEp->dir); spin_unlock_irqrestore(mEp->lock, flags); } @@ -2476,19 +2475,19 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS)) return -EOPNOTSUPP; - spin_lock_irqsave(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); udc->vbus_active = is_active; if (udc->driver) gadget_ready = 1; - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); if (gadget_ready) { if (is_active) { pm_runtime_get_sync(&_gadget->dev); hw_device_reset(udc); - hw_device_state(udc->ep0out->qh.dma); + hw_device_state(udc, udc->ep0out->qh.dma); } else { - hw_device_state(0); + hw_device_state(udc, 0); if (udc->udc_driver->notify_event) udc->udc_driver->notify_event(udc, CI13XXX_CONTROLLER_STOPPED_EVENT); @@ -2508,20 +2507,20 @@ static int ci13xxx_wakeup(struct usb_gadget *_gadget) trace(); - spin_lock_irqsave(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); if (!udc->remote_wakeup) { ret = -EOPNOTSUPP; trace("remote wakeup feature is not enabled\n"); goto out; } - if (!hw_read(hw_bank.op, OP_PORTSC, PORTSC_SUSP)) { + if (!hw_read(udc->hw_bank.op, OP_PORTSC, PORTSC_SUSP)) { ret = -EINVAL; trace("port is not suspended\n"); goto out; } - hw_write(hw_bank.op, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); + hw_write(udc->hw_bank.op, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); out: - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); return ret; } @@ -2594,22 +2593,23 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, return -ENOMEM; } - spin_lock_irqsave(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); - info("hw_ep_max = %d", hw_ep_max); + info("hw_ep_max = %d", udc->hw_ep_max); udc->gadget.dev.driver = NULL; retval = 0; - for (i = 0; i < hw_ep_max/2; i++) { + for (i = 0; i < udc->hw_ep_max/2; i++) { for (j = RX; j <= TX; j++) { - int k = i + j * hw_ep_max/2; + int k = i + j * udc->hw_ep_max/2; struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k]; scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i, (j == TX) ? "in" : "out"); - mEp->lock = udc->lock; + mEp->udc = udc; + mEp->lock = &udc->lock; mEp->device = &udc->gadget.dev; mEp->td_pool = udc->td_pool; @@ -2618,10 +2618,10 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; INIT_LIST_HEAD(&mEp->qh.queue); - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL, &mEp->qh.dma); - spin_lock_irqsave(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); if (mEp->qh.ptr == NULL) retval = -ENOMEM; else @@ -2646,7 +2646,7 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, if (retval) goto done; - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); udc->ep0out->ep.desc = &ctrl_endpt_out_desc; retval = usb_ep_enable(&udc->ep0out->ep); if (retval) @@ -2656,16 +2656,16 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, retval = usb_ep_enable(&udc->ep0in->ep); if (retval) return retval; - spin_lock_irqsave(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); udc->gadget.ep0 = &udc->ep0in->ep; /* bind gadget */ driver->driver.bus = NULL; udc->gadget.dev.driver = &driver->driver; - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); retval = bind(&udc->gadget); /* MAY SLEEP */ - spin_lock_irqsave(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); if (retval) { udc->gadget.dev.driver = NULL; @@ -2684,12 +2684,12 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, } } - retval = hw_device_state(udc->ep0out->qh.dma); + retval = hw_device_state(udc, udc->ep0out->qh.dma); if (retval) pm_runtime_put_sync(&udc->gadget.dev); done: - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); return retval; } @@ -2712,29 +2712,29 @@ static int ci13xxx_stop(struct usb_gadget_driver *driver) driver != udc->driver) return -EINVAL; - spin_lock_irqsave(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) || udc->vbus_active) { - hw_device_state(0); + hw_device_state(udc, 0); if (udc->udc_driver->notify_event) udc->udc_driver->notify_event(udc, CI13XXX_CONTROLLER_STOPPED_EVENT); - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); _gadget_stop_activity(&udc->gadget); - spin_lock_irqsave(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); pm_runtime_put(&udc->gadget.dev); } /* unbind gadget */ - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); driver->unbind(&udc->gadget); /* MAY SLEEP */ - spin_lock_irqsave(udc->lock, flags); + spin_lock_irqsave(&udc->lock, flags); udc->gadget.dev.driver = NULL; /* free resources */ - for (i = 0; i < hw_ep_max; i++) { + for (i = 0; i < udc->hw_ep_max; i++) { struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; if (mEp->num) @@ -2747,7 +2747,7 @@ static int ci13xxx_stop(struct usb_gadget_driver *driver) udc->gadget.ep0 = NULL; udc->driver = NULL; - spin_unlock_irqrestore(udc->lock, flags); + spin_unlock_irqrestore(&udc->lock, flags); if (udc->td_pool != NULL) { dma_pool_destroy(udc->td_pool); @@ -2783,16 +2783,16 @@ static irqreturn_t udc_irq(void) return IRQ_HANDLED; } - spin_lock(udc->lock); + spin_lock(&udc->lock); if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) { - if (hw_read(hw_bank.op, OP_USBMODE, USBMODE_CM) != + if (hw_read(udc->hw_bank.op, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DEVICE) { - spin_unlock(udc->lock); + spin_unlock(&udc->lock); return IRQ_NONE; } } - intr = hw_test_and_clear_intr_active(); + intr = hw_test_and_clear_intr_active(udc); if (intr) { isr_statistics.hndl.buf[isr_statistics.hndl.idx++] = intr; isr_statistics.hndl.idx &= ISR_MASK; @@ -2805,12 +2805,12 @@ static irqreturn_t udc_irq(void) } if (USBi_PCI & intr) { isr_statistics.pci++; - udc->gadget.speed = hw_port_is_high_speed() ? + udc->gadget.speed = hw_port_is_high_speed(udc) ? USB_SPEED_HIGH : USB_SPEED_FULL; if (udc->suspended && udc->driver->resume) { - spin_unlock(udc->lock); + spin_unlock(&udc->lock); udc->driver->resume(&udc->gadget); - spin_lock(udc->lock); + spin_lock(&udc->lock); udc->suspended = 0; } } @@ -2824,9 +2824,9 @@ static irqreturn_t udc_irq(void) if (udc->gadget.speed != USB_SPEED_UNKNOWN && udc->driver->suspend) { udc->suspended = 1; - spin_unlock(udc->lock); + spin_unlock(&udc->lock); udc->driver->suspend(&udc->gadget); - spin_lock(udc->lock); + spin_lock(&udc->lock); } isr_statistics.sli++; } @@ -2835,7 +2835,7 @@ static irqreturn_t udc_irq(void) isr_statistics.none++; retval = IRQ_NONE; } - spin_unlock(udc->lock); + spin_unlock(&udc->lock); return retval; } @@ -2880,7 +2880,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, if (udc == NULL) return -ENOMEM; - udc->lock = &udc_lock; + spin_lock_init(&udc->lock); udc->regs = regs; udc->udc_driver = driver; @@ -2899,7 +2899,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, udc->gadget.dev.parent = dev; udc->gadget.dev.release = udc_release; - retval = hw_device_init(regs, capoffset); + retval = hw_device_init(udc, regs, capoffset); if (retval < 0) goto free_udc; diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h index 926cd68..c48be05 100644 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -94,6 +94,7 @@ struct ci13xxx_ep { int wedge; /* global resources */ + struct ci13xxx *udc; spinlock_t *lock; struct device *device; struct dma_pool *td_pool; @@ -113,9 +114,17 @@ struct ci13xxx_udc_driver { void (*notify_event) (struct ci13xxx *udc, unsigned event); }; +struct hw_bank { + unsigned lpm; /* is LPM? */ + void __iomem *abs; /* bus map offset */ + void __iomem *cap; /* bus map offset + CAP offset */ + void __iomem *op; /* bus map offset + OP offset */ + size_t size; /* bank size */ +}; + /* CI13XXX UDC descriptor & global resources */ struct ci13xxx { - spinlock_t *lock; /* ctrl register bank access */ + spinlock_t lock; /* ctrl register bank access */ void __iomem *regs; /* registers address space */ struct dma_pool *qh_pool; /* DMA pool for queue heads */ @@ -126,11 +135,14 @@ struct ci13xxx { struct ci13xxx_ep ci13xxx_ep[ENDPT_MAX]; /* extended endpts */ u32 ep0_dir; /* ep0 direction */ struct ci13xxx_ep *ep0out, *ep0in; + unsigned hw_ep_max; /* number of hw endpoints */ + u8 remote_wakeup; /* Is remote wakeup feature enabled by the host? */ u8 suspended; /* suspended by the host */ u8 test_mode; /* the selected test mode */ + struct hw_bank hw_bank; struct usb_gadget_driver *driver; /* 3rd party gadget driver */ struct ci13xxx_udc_driver *udc_driver; /* device controller driver */ int vbus_active; /* is VBUS active */ -- cgit v0.10.2 From 262c16320a915c26c927c9f7ddb0e1fe42fa0267 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 8 May 2012 23:28:59 +0300 Subject: usb: gadget: ci13xxx: redo register access Use lookup table instead of conditional macrodefinitions of register addresses. With two different possible register layouts and different register offsets, it's easiest to build a table with register addresses at probe time, based on the information supplied from the platform and device capabilities. This way we get rid of branch-per-register-access. Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 0273970..3b47ca1 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -136,26 +136,73 @@ static int ffs_nr(u32 x) #define ABS_AHBBURST (0x0090UL) #define ABS_AHBMODE (0x0098UL) /* UDC register map */ -#define CAP_CAPLENGTH (0x000UL) -#define CAP_HCCPARAMS (0x008UL) -#define CAP_DCCPARAMS (0x024UL) -#define ABS_TESTMODE (udc->hw_bank.lpm ? 0x0FCUL : 0x138UL) -/* offset to CAPLENTGH (addr + data) */ -#define OP_USBCMD (0x000UL) -#define OP_USBSTS (0x004UL) -#define OP_USBINTR (0x008UL) -#define OP_DEVICEADDR (0x014UL) -#define OP_ENDPTLISTADDR (0x018UL) -#define OP_PORTSC (0x044UL) -#define OP_DEVLC (0x084UL) -#define OP_USBMODE (udc->hw_bank.lpm ? 0x0C8UL : 0x068UL) -#define OP_ENDPTSETUPSTAT (udc->hw_bank.lpm ? 0x0D8UL : 0x06CUL) -#define OP_ENDPTPRIME (udc->hw_bank.lpm ? 0x0DCUL : 0x070UL) -#define OP_ENDPTFLUSH (udc->hw_bank.lpm ? 0x0E0UL : 0x074UL) -#define OP_ENDPTSTAT (udc->hw_bank.lpm ? 0x0E4UL : 0x078UL) -#define OP_ENDPTCOMPLETE (udc->hw_bank.lpm ? 0x0E8UL : 0x07CUL) -#define OP_ENDPTCTRL (udc->hw_bank.lpm ? 0x0ECUL : 0x080UL) -#define OP_LAST (udc->hw_bank.lpm ? 0x12CUL : 0x0C0UL) +static uintptr_t ci_regs_nolpm[] = { + [CAP_CAPLENGTH] = 0x000UL, + [CAP_HCCPARAMS] = 0x008UL, + [CAP_DCCPARAMS] = 0x024UL, + [CAP_TESTMODE] = 0x038UL, + [OP_USBCMD] = 0x000UL, + [OP_USBSTS] = 0x004UL, + [OP_USBINTR] = 0x008UL, + [OP_DEVICEADDR] = 0x014UL, + [OP_ENDPTLISTADDR] = 0x018UL, + [OP_PORTSC] = 0x044UL, + [OP_DEVLC] = 0x084UL, + [OP_USBMODE] = 0x068UL, + [OP_ENDPTSETUPSTAT] = 0x06CUL, + [OP_ENDPTPRIME] = 0x070UL, + [OP_ENDPTFLUSH] = 0x074UL, + [OP_ENDPTSTAT] = 0x078UL, + [OP_ENDPTCOMPLETE] = 0x07CUL, + [OP_ENDPTCTRL] = 0x080UL, +}; + +static uintptr_t ci_regs_lpm[] = { + [CAP_CAPLENGTH] = 0x000UL, + [CAP_HCCPARAMS] = 0x008UL, + [CAP_DCCPARAMS] = 0x024UL, + [CAP_TESTMODE] = 0x0FCUL, + [OP_USBCMD] = 0x000UL, + [OP_USBSTS] = 0x004UL, + [OP_USBINTR] = 0x008UL, + [OP_DEVICEADDR] = 0x014UL, + [OP_ENDPTLISTADDR] = 0x018UL, + [OP_PORTSC] = 0x044UL, + [OP_DEVLC] = 0x084UL, + [OP_USBMODE] = 0x0C8UL, + [OP_ENDPTSETUPSTAT] = 0x0D8UL, + [OP_ENDPTPRIME] = 0x0DCUL, + [OP_ENDPTFLUSH] = 0x0E0UL, + [OP_ENDPTSTAT] = 0x0E4UL, + [OP_ENDPTCOMPLETE] = 0x0E8UL, + [OP_ENDPTCTRL] = 0x0ECUL, +}; + +static int hw_alloc_regmap(struct ci13xxx *udc, bool is_lpm) +{ + int i; + + kfree(udc->hw_bank.regmap); + + udc->hw_bank.regmap = kzalloc((OP_LAST + 1) * sizeof(void *), + GFP_KERNEL); + if (!udc->hw_bank.regmap) + return -ENOMEM; + + for (i = 0; i < OP_ENDPTCTRL; i++) + udc->hw_bank.regmap[i] = + (i <= CAP_LAST ? udc->hw_bank.cap : udc->hw_bank.op) + + (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]); + + for (; i <= OP_LAST; i++) + udc->hw_bank.regmap[i] = udc->hw_bank.op + + 4 * (i - OP_ENDPTCTRL) + + (is_lpm + ? ci_regs_lpm[OP_ENDPTCTRL] + : ci_regs_nolpm[OP_ENDPTCTRL]); + + return 0; +} /** * hw_ep_bit: calculates the bit number @@ -180,62 +227,64 @@ static int ep_to_bit(struct ci13xxx *udc, int n) } /** - * hw_read: reads from a register bitfield - * @base: register block address - * @addr: address relative to operational register base + * hw_read: reads from a hw register + * @reg: register index * @mask: bitfield mask * - * This function returns register bitfield data + * This function returns register contents */ -static u32 hw_read(void __iomem *base, u32 addr, u32 mask) +static u32 hw_read(struct ci13xxx *udc, enum ci13xxx_regs reg, u32 mask) { - return ioread32(addr + base) & mask; + return ioread32(udc->hw_bank.regmap[reg]) & mask; } /** - * hw_write: writes to a register bitfield - * @base: register block address - * @addr: address relative to operational register base + * hw_write: writes to a hw register + * @reg: register index * @mask: bitfield mask - * @data: new data + * @data: new value */ -static void hw_write(void __iomem *base, u32 addr, u32 mask, u32 data) +static void hw_write(struct ci13xxx *udc, enum ci13xxx_regs reg, u32 mask, + u32 data) { - iowrite32(hw_read(base, addr, ~mask) | (data & mask), - addr + base); + if (~mask) + data = (ioread32(udc->hw_bank.regmap[reg]) & ~mask) + | (data & mask); + + iowrite32(data, udc->hw_bank.regmap[reg]); } /** - * hw_test_and_clear: tests & clears operational register bitfield - * @base: register block address - * @addr: address relative to operational register base + * hw_test_and_clear: tests & clears a hw register + * @reg: register index * @mask: bitfield mask * - * This function returns register bitfield data + * This function returns register contents */ -static u32 hw_test_and_clear(void __iomem *base, u32 addr, u32 mask) +static u32 hw_test_and_clear(struct ci13xxx *udc, enum ci13xxx_regs reg, + u32 mask) { - u32 reg = hw_read(base, addr, mask); + u32 val = ioread32(udc->hw_bank.regmap[reg]) & mask; - iowrite32(reg, addr + base); - return reg; + iowrite32(val, udc->hw_bank.regmap[reg]); + return val; } /** - * hw_test_and_write: tests & writes operational register bitfield - * @base: register block address - * @addr: address relative to operational register base + * hw_test_and_write: tests & writes a hw register + * @reg: register index * @mask: bitfield mask - * @data: new data + * @data: new value * - * This function returns register bitfield data + * This function returns register contents */ -static u32 hw_test_and_write(void __iomem *base, u32 addr, u32 mask, u32 data) +static u32 hw_test_and_write(struct ci13xxx *udc, enum ci13xxx_regs reg, + u32 mask, u32 data) { - u32 reg = hw_read(base, addr, ~0); + u32 val = hw_read(udc, reg, ~0); - iowrite32((reg & ~mask) | (data & mask), addr + base); - return (reg & mask) >> ffs_nr(mask); + hw_write(udc, reg, mask, data); + return (val & mask) >> ffs_nr(mask); } static int hw_device_init(struct ci13xxx *udc, void __iomem *base, @@ -250,14 +299,16 @@ static int hw_device_init(struct ci13xxx *udc, void __iomem *base, udc->hw_bank.cap += cap_offset; udc->hw_bank.op = udc->hw_bank.cap + ioread8(udc->hw_bank.cap); - reg = hw_read(udc->hw_bank.cap, CAP_HCCPARAMS, HCCPARAMS_LEN) >> + hw_alloc_regmap(udc, false); + reg = hw_read(udc, CAP_HCCPARAMS, HCCPARAMS_LEN) >> ffs_nr(HCCPARAMS_LEN); udc->hw_bank.lpm = reg; + hw_alloc_regmap(udc, !!reg); udc->hw_bank.size = udc->hw_bank.op - udc->hw_bank.abs; udc->hw_bank.size += OP_LAST; udc->hw_bank.size /= sizeof(u32); - reg = hw_read(udc->hw_bank.cap, CAP_DCCPARAMS, DCCPARAMS_DEN) >> + reg = hw_read(udc, CAP_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN); udc->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ @@ -281,11 +332,11 @@ static int hw_device_init(struct ci13xxx *udc, void __iomem *base, static int hw_device_reset(struct ci13xxx *udc) { /* should flush & stop before reset */ - hw_write(udc->hw_bank.op, OP_ENDPTFLUSH, ~0, ~0); - hw_write(udc->hw_bank.op, OP_USBCMD, USBCMD_RS, 0); + hw_write(udc, OP_ENDPTFLUSH, ~0, ~0); + hw_write(udc, OP_USBCMD, USBCMD_RS, 0); - hw_write(udc->hw_bank.op, OP_USBCMD, USBCMD_RST, USBCMD_RST); - while (hw_read(udc->hw_bank.op, OP_USBCMD, USBCMD_RST)) + hw_write(udc, OP_USBCMD, USBCMD_RST, USBCMD_RST); + while (hw_read(udc, OP_USBCMD, USBCMD_RST)) udelay(10); /* not RTOS friendly */ @@ -294,17 +345,15 @@ static int hw_device_reset(struct ci13xxx *udc) CI13XXX_CONTROLLER_RESET_EVENT); if (udc->udc_driver->flags & CI13XXX_DISABLE_STREAMING) - hw_write(udc->hw_bank.op, OP_USBMODE, USBMODE_SDIS, - USBMODE_SDIS); + hw_write(udc, OP_USBMODE, USBMODE_SDIS, USBMODE_SDIS); /* USBMODE should be configured step by step */ - hw_write(udc->hw_bank.op, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); - hw_write(udc->hw_bank.op, OP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE); + hw_write(udc, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); + hw_write(udc, OP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE); /* HW >= 2.3 */ - hw_write(udc->hw_bank.op, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); + hw_write(udc, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); - if (hw_read(udc->hw_bank.op, OP_USBMODE, USBMODE_CM) != - USBMODE_CM_DEVICE) { + if (hw_read(udc, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DEVICE) { pr_err("cannot enter in device mode"); pr_err("lpm = %i", udc->hw_bank.lpm); return -ENODEV; @@ -323,14 +372,14 @@ static int hw_device_reset(struct ci13xxx *udc) static int hw_device_state(struct ci13xxx *udc, u32 dma) { if (dma) { - hw_write(udc->hw_bank.op, OP_ENDPTLISTADDR, ~0, dma); + hw_write(udc, OP_ENDPTLISTADDR, ~0, dma); /* interrupt, error, port change, reset, sleep/suspend */ - hw_write(udc->hw_bank.op, OP_USBINTR, ~0, + hw_write(udc, OP_USBINTR, ~0, USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); - hw_write(udc->hw_bank.op, OP_USBCMD, USBCMD_RS, USBCMD_RS); + hw_write(udc, OP_USBCMD, USBCMD_RS, USBCMD_RS); } else { - hw_write(udc->hw_bank.op, OP_USBCMD, USBCMD_RS, 0); - hw_write(udc->hw_bank.op, OP_USBINTR, ~0, 0); + hw_write(udc, OP_USBCMD, USBCMD_RS, 0); + hw_write(udc, OP_USBINTR, ~0, 0); } return 0; } @@ -348,10 +397,10 @@ static int hw_ep_flush(struct ci13xxx *udc, int num, int dir) do { /* flush any pending transfer */ - hw_write(udc->hw_bank.op, OP_ENDPTFLUSH, BIT(n), BIT(n)); - while (hw_read(udc->hw_bank.op, OP_ENDPTFLUSH, BIT(n))) + hw_write(udc, OP_ENDPTFLUSH, BIT(n), BIT(n)); + while (hw_read(udc, OP_ENDPTFLUSH, BIT(n))) cpu_relax(); - } while (hw_read(udc->hw_bank.op, OP_ENDPTSTAT, BIT(n))); + } while (hw_read(udc, OP_ENDPTSTAT, BIT(n))); return 0; } @@ -366,7 +415,7 @@ static int hw_ep_flush(struct ci13xxx *udc, int num, int dir) static int hw_ep_disable(struct ci13xxx *udc, int num, int dir) { hw_ep_flush(udc, num, dir); - hw_write(udc->hw_bank.op, OP_ENDPTCTRL + num * sizeof(u32), + hw_write(udc, OP_ENDPTCTRL + num, dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); return 0; } @@ -402,7 +451,7 @@ static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type) mask |= ENDPTCTRL_RXE; /* enable */ data |= ENDPTCTRL_RXE; } - hw_write(udc->hw_bank.op, OP_ENDPTCTRL + num * sizeof(u32), mask, data); + hw_write(udc, OP_ENDPTCTRL + num, mask, data); return 0; } @@ -417,8 +466,7 @@ static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir) { u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; - return !!hw_read(udc->hw_bank.op, OP_ENDPTCTRL + num * sizeof(u32), - mask); + return hw_read(udc, OP_ENDPTCTRL + num, mask) ? 1 : 0; } /** @@ -431,7 +479,7 @@ static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir) static int hw_test_and_clear_setup_status(struct ci13xxx *udc, int n) { n = ep_to_bit(udc, n); - return hw_test_and_clear(udc->hw_bank.op, OP_ENDPTSETUPSTAT, BIT(n)); + return hw_test_and_clear(udc, OP_ENDPTSETUPSTAT, BIT(n)); } /** @@ -446,16 +494,14 @@ static int hw_ep_prime(struct ci13xxx *udc, int num, int dir, int is_ctrl) { int n = hw_ep_bit(num, dir); - if (is_ctrl && dir == RX && - hw_read(udc->hw_bank.op, OP_ENDPTSETUPSTAT, BIT(num))) + if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; - hw_write(udc->hw_bank.op, OP_ENDPTPRIME, BIT(n), BIT(n)); + hw_write(udc, OP_ENDPTPRIME, BIT(n), BIT(n)); - while (hw_read(udc->hw_bank.op, OP_ENDPTPRIME, BIT(n))) + while (hw_read(udc, OP_ENDPTPRIME, BIT(n))) cpu_relax(); - if (is_ctrl && dir == RX && - hw_read(udc->hw_bank.op, OP_ENDPTSETUPSTAT, BIT(num))) + if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; /* status shoult be tested according with manual but it doesn't work */ @@ -477,14 +523,13 @@ static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value) return -EINVAL; do { - u32 addr = OP_ENDPTCTRL + num * sizeof(u32); + enum ci13xxx_regs reg = OP_ENDPTCTRL + num; u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; /* data toggle - reserved for EP0 but it's in ESS */ - hw_write(udc->hw_bank.op, addr, mask_xs|mask_xr, - value ? mask_xs : mask_xr); - + hw_write(udc, reg, mask_xs|mask_xr, + value ? mask_xs : mask_xr); } while (value != hw_ep_get_halt(udc, num, dir)); return 0; @@ -502,9 +547,8 @@ static int hw_intr_clear(struct ci13xxx *udc, int n) if (n >= REG_BITS) return -EINVAL; - hw_write(udc->hw_bank.op, OP_USBINTR, BIT(n), 0); - hw_write(udc->hw_bank.op, OP_USBSTS, BIT(n), BIT(n)); - + hw_write(udc, OP_USBINTR, BIT(n), 0); + hw_write(udc, OP_USBSTS, BIT(n), BIT(n)); return 0; } @@ -520,11 +564,10 @@ static int hw_intr_force(struct ci13xxx *udc, int n) if (n >= REG_BITS) return -EINVAL; - hw_write(udc->hw_bank.cap, ABS_TESTMODE, TESTMODE_FORCE, - TESTMODE_FORCE); - hw_write(udc->hw_bank.op, OP_USBINTR, BIT(n), BIT(n)); - hw_write(udc->hw_bank.op, OP_USBSTS, BIT(n), BIT(n)); - hw_write(udc->hw_bank.cap, ABS_TESTMODE, TESTMODE_FORCE, 0); + hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE); + hw_write(udc, OP_USBINTR, BIT(n), BIT(n)); + hw_write(udc, OP_USBSTS, BIT(n), BIT(n)); + hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, 0); return 0; } @@ -535,9 +578,8 @@ static int hw_intr_force(struct ci13xxx *udc, int n) */ static int hw_port_is_high_speed(struct ci13xxx *udc) { - return udc->hw_bank.lpm - ? hw_read(udc->hw_bank.op, OP_DEVLC, DEVLC_PSPD) - : hw_read(udc->hw_bank.op, OP_PORTSC, PORTSC_HSP); + return udc->hw_bank.lpm ? hw_read(udc, OP_DEVLC, DEVLC_PSPD) : + hw_read(udc, OP_PORTSC, PORTSC_HSP); } /** @@ -547,8 +589,7 @@ static int hw_port_is_high_speed(struct ci13xxx *udc) */ static u8 hw_port_test_get(struct ci13xxx *udc) { - return hw_read(udc->hw_bank.op, OP_PORTSC, PORTSC_PTC) >> - ffs_nr(PORTSC_PTC); + return hw_read(udc, OP_PORTSC, PORTSC_PTC) >> ffs_nr(PORTSC_PTC); } /** @@ -564,8 +605,7 @@ static int hw_port_test_set(struct ci13xxx *udc, u8 mode) if (mode > TEST_MODE_MAX) return -EINVAL; - hw_write(udc->hw_bank.op, OP_PORTSC, PORTSC_PTC, - mode << ffs_nr(PORTSC_PTC)); + hw_write(udc, OP_PORTSC, PORTSC_PTC, mode << ffs_nr(PORTSC_PTC)); return 0; } @@ -576,7 +616,7 @@ static int hw_port_test_set(struct ci13xxx *udc, u8 mode) */ static u32 hw_read_intr_enable(struct ci13xxx *udc) { - return hw_read(udc->hw_bank.op, OP_USBINTR, ~0); + return hw_read(udc, OP_USBINTR, ~0); } /** @@ -586,7 +626,7 @@ static u32 hw_read_intr_enable(struct ci13xxx *udc) */ static u32 hw_read_intr_status(struct ci13xxx *udc) { - return hw_read(udc->hw_bank.op, OP_USBSTS, ~0); + return hw_read(udc, OP_USBSTS, ~0); } /** @@ -604,7 +644,7 @@ static size_t hw_register_read(struct ci13xxx *udc, u32 *buf, size_t size) size = udc->hw_bank.size; for (i = 0; i < size; i++) - buf[i] = hw_read(udc->hw_bank.cap, i * sizeof(u32), ~0); + buf[i] = hw_read(udc, i * sizeof(u32), ~0); return size; } @@ -627,7 +667,7 @@ static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data) /* align */ addr *= sizeof(u32); - hw_write(udc->hw_bank.cap, addr, ~0, data); + hw_write(udc, addr, ~0, data); return 0; } @@ -641,7 +681,7 @@ static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data) static int hw_test_and_clear_complete(struct ci13xxx *udc, int n) { n = ep_to_bit(udc, n); - return hw_test_and_clear(udc->hw_bank.op, OP_ENDPTCOMPLETE, BIT(n)); + return hw_test_and_clear(udc, OP_ENDPTCOMPLETE, BIT(n)); } /** @@ -654,7 +694,7 @@ static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc) { u32 reg = hw_read_intr_status(udc) & hw_read_intr_enable(udc); - hw_write(udc->hw_bank.op, OP_USBSTS, ~0, reg); + hw_write(udc, OP_USBSTS, ~0, reg); return reg; } @@ -666,7 +706,7 @@ static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc) */ static int hw_test_and_clear_setup_guard(struct ci13xxx *udc) { - return hw_test_and_write(udc->hw_bank.op, OP_USBCMD, USBCMD_SUTW, 0); + return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, 0); } /** @@ -677,8 +717,7 @@ static int hw_test_and_clear_setup_guard(struct ci13xxx *udc) */ static int hw_test_and_set_setup_guard(struct ci13xxx *udc) { - return hw_test_and_write(udc->hw_bank.op, OP_USBCMD, USBCMD_SUTW, - USBCMD_SUTW); + return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); } /** @@ -690,9 +729,8 @@ static int hw_test_and_set_setup_guard(struct ci13xxx *udc) static int hw_usb_set_address(struct ci13xxx *udc, u8 value) { /* advance */ - hw_write(udc->hw_bank.op, OP_DEVICEADDR, - DEVICEADDR_USBADR | DEVICEADDR_USBADRA, - value << ffs_nr(DEVICEADDR_USBADR) | DEVICEADDR_USBADRA); + hw_write(udc, OP_DEVICEADDR, DEVICEADDR_USBADR | DEVICEADDR_USBADRA, + value << ffs_nr(DEVICEADDR_USBADR) | DEVICEADDR_USBADRA); return 0; } @@ -707,16 +745,16 @@ static int hw_usb_reset(struct ci13xxx *udc) hw_usb_set_address(udc, 0); /* ESS flushes only at end?!? */ - hw_write(udc->hw_bank.op, OP_ENDPTFLUSH, ~0, ~0); + hw_write(udc, OP_ENDPTFLUSH, ~0, ~0); /* clear setup token semaphores */ - hw_write(udc->hw_bank.op, OP_ENDPTSETUPSTAT, 0, 0); + hw_write(udc, OP_ENDPTSETUPSTAT, 0, 0); /* clear complete status */ - hw_write(udc->hw_bank.op, OP_ENDPTCOMPLETE, 0, 0); + hw_write(udc, OP_ENDPTCOMPLETE, 0, 0); /* wait until all bits cleared */ - while (hw_read(udc->hw_bank.op, OP_ENDPTPRIME, ~0)) + while (hw_read(udc, OP_ENDPTPRIME, ~0)) udelay(10); /* not RTOS friendly */ /* reset all endpoints ? */ @@ -1500,15 +1538,13 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) else mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK; wmb(); - if (hw_read(udc->hw_bank.op, OP_ENDPTPRIME, BIT(n))) + if (hw_read(udc, OP_ENDPTPRIME, BIT(n))) goto done; do { - hw_write(udc->hw_bank.op, OP_USBCMD, USBCMD_ATDTW, - USBCMD_ATDTW); - tmp_stat = hw_read(udc->hw_bank.op, OP_ENDPTSTAT, - BIT(n)); - } while (!hw_read(udc->hw_bank.op, OP_USBCMD, USBCMD_ATDTW)); - hw_write(udc->hw_bank.op, OP_USBCMD, USBCMD_ATDTW, 0); + hw_write(udc, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); + tmp_stat = hw_read(udc, OP_ENDPTSTAT, BIT(n)); + } while (!hw_read(udc, OP_USBCMD, USBCMD_ATDTW)); + hw_write(udc, OP_USBCMD, USBCMD_ATDTW, 0); if (tmp_stat) goto done; } @@ -2513,12 +2549,12 @@ static int ci13xxx_wakeup(struct usb_gadget *_gadget) trace("remote wakeup feature is not enabled\n"); goto out; } - if (!hw_read(udc->hw_bank.op, OP_PORTSC, PORTSC_SUSP)) { + if (!hw_read(udc, OP_PORTSC, PORTSC_SUSP)) { ret = -EINVAL; trace("port is not suspended\n"); goto out; } - hw_write(udc->hw_bank.op, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); + hw_write(udc, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); out: spin_unlock_irqrestore(&udc->lock, flags); return ret; @@ -2786,8 +2822,8 @@ static irqreturn_t udc_irq(void) spin_lock(&udc->lock); if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) { - if (hw_read(udc->hw_bank.op, OP_USBMODE, USBMODE_CM) != - USBMODE_CM_DEVICE) { + if (hw_read(udc, OP_USBMODE, USBMODE_CM) != + USBMODE_CM_DEVICE) { spin_unlock(&udc->lock); return IRQ_NONE; } @@ -2993,6 +3029,7 @@ static void udc_remove(void) #endif device_unregister(&udc->gadget.dev); + kfree(udc->hw_bank.regmap); kfree(udc); _udc = NULL; } diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h index c48be05..f17ffec 100644 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -120,6 +120,7 @@ struct hw_bank { void __iomem *cap; /* bus map offset + CAP offset */ void __iomem *op; /* bus map offset + OP offset */ size_t size; /* bank size */ + void *__iomem *regmap; }; /* CI13XXX UDC descriptor & global resources */ @@ -158,6 +159,31 @@ struct ci13xxx { /* register size */ #define REG_BITS (32) +/* register indices */ +enum ci13xxx_regs { + CAP_CAPLENGTH, + CAP_HCCPARAMS, + CAP_DCCPARAMS, + CAP_TESTMODE, + CAP_LAST = CAP_TESTMODE, + OP_USBCMD, + OP_USBSTS, + OP_USBINTR, + OP_DEVICEADDR, + OP_ENDPTLISTADDR, + OP_PORTSC, + OP_DEVLC, + OP_USBMODE, + OP_ENDPTSETUPSTAT, + OP_ENDPTPRIME, + OP_ENDPTFLUSH, + OP_ENDPTSTAT, + OP_ENDPTCOMPLETE, + OP_ENDPTCTRL, + /* endptctrl1..15 follow */ + OP_LAST = OP_ENDPTCTRL + ENDPT_MAX / 2, +}; + /* HCCPARAMS */ #define HCCPARAMS_LEN BIT(17) -- cgit v0.10.2 From ed6c6f419f02a6da444e26374f3510ac57b6faf4 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 8 May 2012 23:29:00 +0300 Subject: usb: gadget: conversion of controllers choice to menu After the UDC class conversion, there is no reason to limit the kernel to have only one UDC controller in the system. Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index fb883e1..55aad927 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -123,13 +123,7 @@ config USB_GADGET_STORAGE_NUM_BUFFERS # - discrete ones (including all PCI-only controllers) # - debug/dummy gadget+hcd is last. # -choice - prompt "USB Peripheral Controller" - help - A USB device uses a controller to talk to its host. - Systems should have only one such upstream link. - Many controller drivers are platform-specific; these - often need board-specific hooks. +menu "USB Peripheral Controller" # # Integrated controllers @@ -536,7 +530,7 @@ config USB_DUMMY_HCD # NOTE: Please keep dummy_hcd LAST so that "real hardware" appears # first and will be selected by default. -endchoice +endmenu # Selected by UDC drivers that support high-speed operation. config USB_GADGET_DUALSPEED -- cgit v0.10.2 From 62bb84ed0e4d14b0a5070f44b2387a42f7f535d9 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 8 May 2012 23:29:01 +0300 Subject: usb: gadget: ci13xxx: convert to platform device Let's break ci13xxx driver into a separate udc driver and platform drivers _pci and _msm, which will create a platform device for each pci (or msm) device found. The approach was introduced by Felipe in dwc3 driver and there seems to be no reason not to use it. msm related code is only compile-tested. Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 55aad927..47e086a 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -378,16 +378,28 @@ config USB_FSL_QE Set CONFIG_USB_GADGET to "m" to build this driver as a dynamically linked module called "fsl_qe_udc". +config USB_CHIPIDEA_UDC + tristate "ChipIdea UDC driver" + select USB_GADGET_DUALSPEED + help + This module contains the ChipIdea USB device controller driver; + you will also need platform driver like ci13xxx_pci or ci13xxx_msm + to use it. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "ci13xxx_udc", which will serve + as a driver for ChipIdea udc on different platforms. + config USB_CI13XXX_PCI tristate "MIPS USB CI13xxx PCI UDC" - depends on PCI + depends on PCI && USB_CHIPIDEA_UDC select USB_GADGET_DUALSPEED help MIPS USB IP core family device controller Currently it only supports IP part number CI13412 Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "ci13xxx_udc" and force all + dynamically linked module called "ci13xxx_pci" and force all gadget drivers to also be dynamically linked. config USB_NET2272 @@ -484,7 +496,7 @@ config USB_EG20T config USB_CI13XXX_MSM tristate "MIPS USB CI13xxx for MSM" - depends on ARCH_MSM + depends on ARCH_MSM && USB_CHIPIDEA_UDC select USB_GADGET_DUALSPEED select USB_MSM_OTG help diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 1565253..3786c7c 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -22,6 +22,7 @@ fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o obj-$(CONFIG_USB_M66592) += m66592-udc.o obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o +obj-$(CONFIG_USB_CHIPIDEA_UDC) += ci13xxx_udc.o obj-$(CONFIG_USB_CI13XXX_PCI) += ci13xxx_pci.o obj-$(CONFIG_USB_S3C_HSOTG) += s3c-hsotg.o obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c index 6e77446..418de0e 100644 --- a/drivers/usb/gadget/ci13xxx_msm.c +++ b/drivers/usb/gadget/ci13xxx_msm.c @@ -10,16 +10,12 @@ #include #include #include +#include -#include "ci13xxx_udc.c" +#include "ci13xxx_udc.h" #define MSM_USB_BASE (udc->regs) -static irqreturn_t msm_udc_irq(int irq, void *data) -{ - return udc_irq(); -} - static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event) { struct device *dev = udc->gadget.dev.parent; @@ -60,54 +56,40 @@ static struct ci13xxx_udc_driver ci13xxx_msm_udc_driver = { static int ci13xxx_msm_probe(struct platform_device *pdev) { - struct resource *res; - void __iomem *regs; - int irq; + struct platform_device *plat_ci; int ret; dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n"); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get platform resource mem\n"); - return -ENXIO; - } - - regs = ioremap(res->start, resource_size(res)); - if (!regs) { - dev_err(&pdev->dev, "ioremap failed\n"); + plat_ci = platform_device_alloc("ci_udc", -1); + if (!plat_ci) { + dev_err(&pdev->dev, "can't allocate ci_udc platform device\n"); return -ENOMEM; } - ret = udc_probe(&ci13xxx_msm_udc_driver, &pdev->dev, regs, - DEF_CAPOFFSET); - if (ret < 0) { - dev_err(&pdev->dev, "udc_probe failed\n"); - goto iounmap; + ret = platform_device_add_resources(plat_ci, pdev->resource, + pdev->num_resources); + if (ret) { + dev_err(&pdev->dev, "can't add resources to platform device\n"); + goto put_platform; } - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "IRQ not found\n"); - ret = -ENXIO; - goto udc_remove; - } + ret = platform_device_add_data(plat_ci, &ci13xxx_msm_udc_driver, + sizeof(ci13xxx_msm_udc_driver)); + if (ret) + goto put_platform; - ret = request_irq(irq, msm_udc_irq, IRQF_SHARED, pdev->name, pdev); - if (ret < 0) { - dev_err(&pdev->dev, "request_irq failed\n"); - goto udc_remove; - } + ret = platform_device_add(plat_ci); + if (ret) + goto put_platform; pm_runtime_no_callbacks(&pdev->dev); pm_runtime_enable(&pdev->dev); return 0; -udc_remove: - udc_remove(); -iounmap: - iounmap(regs); +put_platform: + platform_device_put(plat_ci); return ret; } diff --git a/drivers/usb/gadget/ci13xxx_pci.c b/drivers/usb/gadget/ci13xxx_pci.c index ef5da49..ea03fab 100644 --- a/drivers/usb/gadget/ci13xxx_pci.c +++ b/drivers/usb/gadget/ci13xxx_pci.c @@ -10,10 +10,13 @@ * published by the Free Software Foundation. */ +#include #include #include +#include +#include -#include "ci13xxx_udc.c" +#include "ci13xxx_udc.h" /* driver name */ #define UDC_DRIVER_NAME "ci13xxx_pci" @@ -21,25 +24,14 @@ /****************************************************************************** * PCI block *****************************************************************************/ -/** - * ci13xxx_pci_irq: interrut handler - * @irq: irq number - * @pdev: USB Device Controller interrupt source - * - * This function returns IRQ_HANDLED if the IRQ has been handled - * This is an ISR don't trace, use attribute interface instead - */ -static irqreturn_t ci13xxx_pci_irq(int irq, void *pdev) -{ - if (irq == 0) { - dev_err(&((struct pci_dev *)pdev)->dev, "Invalid IRQ0 usage!"); - return IRQ_HANDLED; - } - return udc_irq(); -} +struct ci13xxx_udc_driver pci_driver = { + .name = UDC_DRIVER_NAME, + .capoffset = DEF_CAPOFFSET, +}; -static struct ci13xxx_udc_driver ci13xxx_pci_udc_driver = { +struct ci13xxx_udc_driver langwell_pci_driver = { .name = UDC_DRIVER_NAME, + .capoffset = 0, }; /** @@ -54,9 +46,10 @@ static struct ci13xxx_udc_driver ci13xxx_pci_udc_driver = { static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { - void __iomem *regs = NULL; - uintptr_t capoffset = DEF_CAPOFFSET; - int retval = 0; + struct ci13xxx_udc_driver *driver = (void *)id->driver_data; + struct platform_device *plat_ci; + struct resource res[3]; + int retval = 0, nres = 2; if (id == NULL) return -EINVAL; @@ -71,45 +64,50 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev, goto disable_device; } - retval = pci_request_regions(pdev, UDC_DRIVER_NAME); - if (retval) - goto disable_device; - - /* BAR 0 holds all the registers */ - regs = pci_iomap(pdev, 0, 0); - if (!regs) { - dev_err(&pdev->dev, "Error mapping memory!"); - retval = -EFAULT; - goto release_regions; - } - pci_set_drvdata(pdev, (__force void *)regs); - + pci_set_power_state(pdev, PCI_D0); pci_set_master(pdev); pci_try_set_mwi(pdev); - if (pdev->vendor == PCI_VENDOR_ID_INTEL) - capoffset = 0; + plat_ci = platform_device_alloc("ci_udc", -1); + if (!plat_ci) { + dev_err(&pdev->dev, "can't allocate ci_udc platform device\n"); + retval = -ENOMEM; + goto disable_device; + } - retval = udc_probe(&ci13xxx_pci_udc_driver, &pdev->dev, regs, - capoffset); + memset(res, 0, sizeof(res)); + res[0].start = pci_resource_start(pdev, 0); + res[0].end = pci_resource_end(pdev, 0); + res[0].flags = IORESOURCE_MEM; + res[1].start = pdev->irq; + res[1].flags = IORESOURCE_IRQ; + + retval = platform_device_add_resources(plat_ci, res, nres); + if (retval) { + dev_err(&pdev->dev, "can't add resources to platform device\n"); + goto put_platform; + } + + retval = platform_device_add_data(plat_ci, driver, sizeof(*driver)); if (retval) - goto iounmap; + goto put_platform; - /* our device does not have MSI capability */ + dma_set_coherent_mask(&plat_ci->dev, pdev->dev.coherent_dma_mask); + plat_ci->dev.dma_mask = pdev->dev.dma_mask; + plat_ci->dev.dma_parms = pdev->dev.dma_parms; + plat_ci->dev.parent = &pdev->dev; - retval = request_irq(pdev->irq, ci13xxx_pci_irq, IRQF_SHARED, - UDC_DRIVER_NAME, pdev); + pci_set_drvdata(pdev, plat_ci); + + retval = platform_device_add(plat_ci); if (retval) - goto gadget_remove; + goto put_platform; return 0; - gadget_remove: - udc_remove(); - iounmap: - pci_iounmap(pdev, regs); - release_regions: - pci_release_regions(pdev); + put_platform: + pci_set_drvdata(pdev, NULL); + platform_device_put(plat_ci); disable_device: pci_disable_device(pdev); done: @@ -126,10 +124,10 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev, */ static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev) { - free_irq(pdev->irq, pdev); - udc_remove(); - pci_iounmap(pdev, (__force void __iomem *)pci_get_drvdata(pdev)); - pci_release_regions(pdev); + struct platform_device *plat_ci = pci_get_drvdata(pdev); + + platform_device_unregister(plat_ci); + pci_set_drvdata(pdev, NULL); pci_disable_device(pdev); } @@ -140,10 +138,22 @@ static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev) * Check "pci.h" for details */ static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = { - { PCI_DEVICE(0x153F, 0x1004) }, - { PCI_DEVICE(0x153F, 0x1006) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829) }, + { + PCI_DEVICE(0x153F, 0x1004), + .driver_data = (kernel_ulong_t)&pci_driver, + }, + { + PCI_DEVICE(0x153F, 0x1006), + .driver_data = (kernel_ulong_t)&pci_driver, + }, + { + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811), + .driver_data = (kernel_ulong_t)&langwell_pci_driver, + }, + { + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829), + .driver_data = (kernel_ulong_t)&langwell_pci_driver, + }, { 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ } }; MODULE_DEVICE_TABLE(pci, ci13xxx_pci_id_table); diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 3b47ca1..009a3cd 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -55,6 +55,8 @@ #include #include #include +#include +#include #include #include #include @@ -67,7 +69,6 @@ #include "ci13xxx_udc.h" - /****************************************************************************** * DEFINE *****************************************************************************/ @@ -2806,7 +2807,7 @@ static int ci13xxx_stop(struct usb_gadget_driver *driver) * This function returns IRQ_HANDLED if the IRQ has been handled * It locks access to registers */ -static irqreturn_t udc_irq(void) +static irqreturn_t udc_irq(int irq, void *data) { struct ci13xxx *udc = _udc; irqreturn_t retval; @@ -2901,7 +2902,7 @@ static void udc_release(struct device *dev) * Kernel assumes 32-bit DMA operations by default, no need to dma_set_mask */ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, - void __iomem *regs, uintptr_t capoffset) + void __iomem *regs) { struct ci13xxx *udc; int retval = 0; @@ -2935,7 +2936,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, udc->gadget.dev.parent = dev; udc->gadget.dev.release = udc_release; - retval = hw_device_init(udc, regs, capoffset); + retval = hw_device_init(udc, regs, driver->capoffset); if (retval < 0) goto free_udc; @@ -3033,3 +3034,72 @@ static void udc_remove(void) kfree(udc); _udc = NULL; } + +static int __devinit ci_udc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ci13xxx_udc_driver *driver = dev->platform_data; + struct resource *res; + void __iomem *base; + int ret; + + if (!driver) { + dev_err(dev, "platform data missing\n"); + return -ENODEV; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "missing resource\n"); + return -ENODEV; + } + + base = devm_request_and_ioremap(dev, res); + if (!res) { + dev_err(dev, "can't request and ioremap resource\n"); + return -ENOMEM; + } + + ret = udc_probe(driver, dev, base); + if (ret) + return ret; + + _udc->irq = platform_get_irq(pdev, 0); + if (_udc->irq < 0) { + dev_err(dev, "missing IRQ\n"); + ret = -ENODEV; + goto out; + } + + ret = request_irq(_udc->irq, udc_irq, IRQF_SHARED, driver->name, _udc); + +out: + if (ret) + udc_remove(); + + return ret; +} + +static int __devexit ci_udc_remove(struct platform_device *pdev) +{ + free_irq(_udc->irq, _udc); + udc_remove(); + + return 0; +} + +static struct platform_driver ci_udc_driver = { + .probe = ci_udc_probe, + .remove = __devexit_p(ci_udc_remove), + .driver = { + .name = "ci_udc", + }, +}; + +module_platform_driver(ci_udc_driver); + +MODULE_ALIAS("platform:ci_udc"); +MODULE_ALIAS("platform:ci13xxx"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("David Lopo "); +MODULE_DESCRIPTION("ChipIdea UDC Driver"); diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h index f17ffec..f605090 100644 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -103,6 +103,8 @@ struct ci13xxx_ep { struct ci13xxx; struct ci13xxx_udc_driver { const char *name; + /* offset of the capability registers */ + uintptr_t capoffset; unsigned long flags; #define CI13XXX_REGS_SHARED BIT(0) #define CI13XXX_REQUIRE_TRANSCEIVER BIT(1) @@ -144,6 +146,7 @@ struct ci13xxx { u8 test_mode; /* the selected test mode */ struct hw_bank hw_bank; + int irq; struct usb_gadget_driver *driver; /* 3rd party gadget driver */ struct ci13xxx_udc_driver *udc_driver; /* device controller driver */ int vbus_active; /* is VBUS active */ -- cgit v0.10.2 From 0f089094cde53a2639c965cd3bd3fdef27006446 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 8 May 2012 23:29:02 +0300 Subject: usb: gadget: ci13xxx: replace home-brewed logging with dev_{err,warn,info} Logging output in the driver is mostly done using custom err/warn/info macros which rely on the existence of the global variable _udc, which is a global reference to the udc controller structure. This reference will have to go in order to allow us to have more than one chipidea udc in the system. Thus, replace custom macros with dev_{err,warn,info} using the platform device where possible. The trace() macro, which is a nop by default is left for tracing purposes. Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 009a3cd..ce50af9 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -781,9 +781,9 @@ static ssize_t show_device(struct device *dev, struct device_attribute *attr, struct usb_gadget *gadget = &udc->gadget; int n = 0; - dbg_trace("[%s] %p\n", __func__, buf); + trace(udc->dev, "%p\n", buf); if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); + dev_err(udc->dev, "[%s] EINVAL\n", __func__); return 0; } @@ -823,7 +823,7 @@ static ssize_t show_driver(struct device *dev, struct device_attribute *attr, struct usb_gadget_driver *driver = udc->driver; int n = 0; - dbg_trace("[%s] %p\n", __func__, buf); + trace(udc->dev, "%p\n", buf); if (attr == NULL || buf == NULL) { dev_err(dev, "[%s] EINVAL\n", __func__); return 0; @@ -984,9 +984,9 @@ static ssize_t show_events(struct device *dev, struct device_attribute *attr, unsigned long flags; unsigned i, j, n = 0; - dbg_trace("[%s] %p\n", __func__, buf); + trace(dev->parent, "%p\n", buf); if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); + dev_err(dev->parent, "[%s] EINVAL\n", __func__); return 0; } @@ -1019,7 +1019,7 @@ static ssize_t store_events(struct device *dev, struct device_attribute *attr, { unsigned tty; - dbg_trace("[%s] %p, %d\n", __func__, buf, count); + trace(dev->parent, "[%s] %p, %d\n", __func__, buf, count); if (attr == NULL || buf == NULL) { dev_err(dev, "[%s] EINVAL\n", __func__); goto done; @@ -1051,9 +1051,9 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr, u32 intr; unsigned i, j, n = 0; - dbg_trace("[%s] %p\n", __func__, buf); + trace(udc->dev, "%p\n", buf); if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); + dev_err(udc->dev, "[%s] EINVAL\n", __func__); return 0; } @@ -1124,14 +1124,14 @@ static ssize_t store_inters(struct device *dev, struct device_attribute *attr, unsigned long flags; unsigned en, bit; - dbg_trace("[%s] %p, %d\n", __func__, buf, count); + trace(udc->dev, "%p, %d\n", buf, count); if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); + dev_err(udc->dev, "EINVAL\n"); goto done; } if (sscanf(buf, "%u %u", &en, &bit) != 2 || en > 1) { - dev_err(dev, "<1|0> : enable|disable interrupt"); + dev_err(udc->dev, "<1|0> : enable|disable interrupt\n"); goto done; } @@ -1164,9 +1164,9 @@ static ssize_t show_port_test(struct device *dev, unsigned long flags; unsigned mode; - dbg_trace("[%s] %p\n", __func__, buf); + trace(udc->dev, "%p\n", buf); if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); + dev_err(udc->dev, "EINVAL\n"); return 0; } @@ -1190,20 +1190,20 @@ static ssize_t store_port_test(struct device *dev, unsigned long flags; unsigned mode; - dbg_trace("[%s] %p, %d\n", __func__, buf, count); + trace(udc->dev, "%p, %d\n", buf, count); if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); + dev_err(udc->dev, "[%s] EINVAL\n", __func__); goto done; } if (sscanf(buf, "%u", &mode) != 1) { - dev_err(dev, ": set port test mode"); + dev_err(udc->dev, ": set port test mode"); goto done; } spin_lock_irqsave(&udc->lock, flags); if (hw_port_test_set(udc, mode)) - dev_err(dev, "invalid mode\n"); + dev_err(udc->dev, "invalid mode\n"); spin_unlock_irqrestore(&udc->lock, flags); done: @@ -1224,9 +1224,9 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, unsigned long flags; unsigned i, j, n = 0; - dbg_trace("[%s] %p\n", __func__, buf); + trace(udc->dev, "%p\n", buf); if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); + dev_err(udc->dev, "[%s] EINVAL\n", __func__); return 0; } @@ -1265,15 +1265,15 @@ static ssize_t show_registers(struct device *dev, u32 *dump; unsigned i, k, n = 0; - dbg_trace("[%s] %p\n", __func__, buf); + trace(udc->dev, "%p\n", buf); if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); + dev_err(udc->dev, "[%s] EINVAL\n", __func__); return 0; } dump = kmalloc(sizeof(u32) * DUMP_ENTRIES, GFP_KERNEL); if (!dump) { - dev_err(dev, "%s: out of memory\n", __func__); + dev_err(udc->dev, "%s: out of memory\n", __func__); return 0; } @@ -1303,20 +1303,21 @@ static ssize_t store_registers(struct device *dev, struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); unsigned long addr, data, flags; - dbg_trace("[%s] %p, %d\n", __func__, buf, count); + trace(udc->dev, "%p, %d\n", buf, count); if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); + dev_err(udc->dev, "[%s] EINVAL\n", __func__); goto done; } if (sscanf(buf, "%li %li", &addr, &data) != 2) { - dev_err(dev, " : write data to register address"); + dev_err(udc->dev, + " : write data to register address\n"); goto done; } spin_lock_irqsave(&udc->lock, flags); if (hw_register_write(udc, addr, data)) - dev_err(dev, "invalid address range\n"); + dev_err(udc->dev, "invalid address range\n"); spin_unlock_irqrestore(&udc->lock, flags); done: @@ -1339,9 +1340,9 @@ static ssize_t show_requests(struct device *dev, struct device_attribute *attr, struct ci13xxx_req *req = NULL; unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32); - dbg_trace("[%s] %p\n", __func__, buf); + trace(udc->dev, "%p\n", buf); if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); + dev_err(udc->dev, "[%s] EINVAL\n", __func__); return 0; } @@ -1470,7 +1471,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) int ret = 0; unsigned length = mReq->req.length; - trace("%p, %p", mEp, mReq); + trace(udc->dev, "%p, %p", mEp, mReq); /* don't queue twice */ if (mReq->req.status == -EALREADY) @@ -1572,7 +1573,7 @@ done: */ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) { - trace("%p, %p", mEp, mReq); + trace(mEp->udc->dev, "%p, %p", mEp, mReq); if (mReq->req.status != -EALREADY) return -EINVAL; @@ -1623,7 +1624,7 @@ static int _ep_nuke(struct ci13xxx_ep *mEp) __releases(mEp->lock) __acquires(mEp->lock) { - trace("%p", mEp); + trace(mEp->udc->dev, "%p", mEp); if (mEp == NULL) return -EINVAL; @@ -1660,7 +1661,7 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); unsigned long flags; - trace("%p", gadget); + trace(udc->dev, "%p", gadget); if (gadget == NULL) return -EINVAL; @@ -1708,12 +1709,7 @@ __acquires(udc->lock) { int retval; - trace("%p", udc); - - if (udc == NULL) { - pr_err("EINVAL\n"); - return; - } + trace(udc->dev, "%p", udc); dbg_event(0xFF, "BUS RST", 0); @@ -1734,7 +1730,7 @@ __acquires(udc->lock) done: if (retval) - pr_err("error: %i\n", retval); + dev_err(udc->dev, "error: %i\n", retval); } /** @@ -1746,12 +1742,10 @@ __acquires(udc->lock) */ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) { - trace("%p, %p", ep, req); + trace(NULL, "%p, %p", ep, req); - if (ep == NULL || req == NULL) { - pr_err("EINVAL\n"); + if (ep == NULL || req == NULL) return; - } kfree(req->buf); usb_ep_free_request(ep, req); @@ -1774,7 +1768,7 @@ __acquires(mEp->lock) gfp_t gfp_flags = GFP_ATOMIC; int dir, num, retval; - trace("%p, %p", mEp, setup); + trace(udc->dev, "%p, %p", mEp, setup); if (mEp == NULL || setup == NULL) return -EINVAL; @@ -1837,7 +1831,7 @@ isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) struct ci13xxx *udc = req->context; unsigned long flags; - trace("%p, %p", ep, req); + trace(udc->dev, "%p, %p", ep, req); spin_lock_irqsave(&udc->lock, flags); if (udc->test_mode) @@ -1858,7 +1852,7 @@ __acquires(mEp->lock) int retval; struct ci13xxx_ep *mEp; - trace("%p", udc); + trace(udc->dev, "%p", udc); mEp = (udc->ep0_dir == TX) ? udc->ep0out : udc->ep0in; udc->status->context = udc; @@ -1886,7 +1880,7 @@ __acquires(mEp->lock) struct ci13xxx_ep *mEpTemp = mEp; int uninitialized_var(retval); - trace("%p", mEp); + trace(mEp->udc->dev, "%p", mEp); if (list_empty(&mEp->qh.queue)) return -EINVAL; @@ -1929,12 +1923,7 @@ __acquires(udc->lock) unsigned i; u8 tmode = 0; - trace("%p", udc); - - if (udc == NULL) { - pr_err("EINVAL\n"); - return; - } + trace(udc->dev, "%p", udc); for (i = 0; i < udc->hw_ep_max; i++) { struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; @@ -1954,7 +1943,7 @@ __acquires(udc->lock) "ERROR", err); spin_unlock(&udc->lock); if (usb_ep_set_halt(&mEp->ep)) - dev_err(&udc->gadget.dev, + dev_err(udc->dev, "error: ep_set_halt\n"); spin_lock(&udc->lock); } @@ -1966,8 +1955,7 @@ __acquires(udc->lock) continue; if (i != 0) { - dev_warn(&udc->gadget.dev, - "ctrl traffic received at endpoint\n"); + dev_warn(udc->dev, "ctrl traffic at endpoint %d\n", i); continue; } @@ -2107,8 +2095,7 @@ delegate: spin_unlock(&udc->lock); if (usb_ep_set_halt(&mEp->ep)) - dev_err(&udc->gadget.dev, - "error: ep_set_halt\n"); + dev_err(udc->dev, "error: ep_set_halt\n"); spin_lock(&udc->lock); } } @@ -2129,7 +2116,7 @@ static int ep_enable(struct usb_ep *ep, int retval = 0; unsigned long flags; - trace("%p, %p", ep, desc); + trace(mEp->udc->dev, "%p, %p", ep, desc); if (ep == NULL || desc == NULL) return -EINVAL; @@ -2141,7 +2128,7 @@ static int ep_enable(struct usb_ep *ep, mEp->ep.desc = desc; if (!list_empty(&mEp->qh.queue)) - warn("enabling a non-empty endpoint!"); + dev_warn(mEp->udc->dev, "enabling a non-empty endpoint!\n"); mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX; mEp->num = usb_endpoint_num(desc); @@ -2186,7 +2173,7 @@ static int ep_disable(struct usb_ep *ep) int direction, retval = 0; unsigned long flags; - trace("%p", ep); + trace(mEp->udc->dev, "%p", ep); if (ep == NULL) return -EINVAL; @@ -2225,12 +2212,10 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); struct ci13xxx_req *mReq = NULL; - trace("%p, %i", ep, gfp_flags); + trace(mEp->udc->dev, "%p, %i", ep, gfp_flags); - if (ep == NULL) { - pr_err("EINVAL\n"); + if (ep == NULL) return NULL; - } mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags); if (mReq != NULL) { @@ -2261,13 +2246,12 @@ static void ep_free_request(struct usb_ep *ep, struct usb_request *req) struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); unsigned long flags; - trace("%p, %p", ep, req); + trace(mEp->udc->dev, "%p, %p", ep, req); if (ep == NULL || req == NULL) { - pr_err("EINVAL\n"); return; } else if (!list_empty(&mReq->queue)) { - pr_err("EBUSY\n"); + dev_err(mEp->udc->dev, "freeing queued request\n"); return; } @@ -2295,7 +2279,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, int retval = 0; unsigned long flags; - trace("%p, %p, %X", ep, req, gfp_flags); + trace(mEp->udc->dev, "%p, %p, %X", ep, req, gfp_flags); if (ep == NULL || req == NULL || mEp->ep.desc == NULL) return -EINVAL; @@ -2309,21 +2293,22 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, if (!list_empty(&mEp->qh.queue)) { _ep_nuke(mEp); retval = -EOVERFLOW; - warn("endpoint ctrl %X nuked", _usb_addr(mEp)); + dev_warn(mEp->udc->dev, "endpoint ctrl %X nuked\n", + _usb_addr(mEp)); } } /* first nuke then test link, e.g. previous status has not sent */ if (!list_empty(&mReq->queue)) { retval = -EBUSY; - pr_err("request already in queue\n"); + dev_err(mEp->udc->dev, "request already in queue\n"); goto done; } if (req->length > 4 * CI13XXX_PAGE_SIZE) { req->length = 4 * CI13XXX_PAGE_SIZE; retval = -EMSGSIZE; - warn("request length truncated"); + dev_warn(mEp->udc->dev, "request length truncated\n"); } dbg_queue(_usb_addr(mEp), req, retval); @@ -2357,7 +2342,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); unsigned long flags; - trace("%p, %p", ep, req); + trace(mEp->udc->dev, "%p, %p", ep, req); if (ep == NULL || req == NULL || mReq->req.status != -EALREADY || mEp->ep.desc == NULL || list_empty(&mReq->queue) || @@ -2401,7 +2386,7 @@ static int ep_set_halt(struct usb_ep *ep, int value) int direction, retval = 0; unsigned long flags; - trace("%p, %i", ep, value); + trace(mEp->udc->dev, "%p, %i", ep, value); if (ep == NULL || mEp->ep.desc == NULL) return -EINVAL; @@ -2444,7 +2429,7 @@ static int ep_set_wedge(struct usb_ep *ep) struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); unsigned long flags; - trace("%p", ep); + trace(mEp->udc->dev, "%p", ep); if (ep == NULL || mEp->ep.desc == NULL) return -EINVAL; @@ -2469,10 +2454,10 @@ static void ep_fifo_flush(struct usb_ep *ep) struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); unsigned long flags; - trace("%p", ep); + trace(mEp->udc->dev, "%p", ep); if (ep == NULL) { - pr_err("%02X: -EINVAL\n", _usb_addr(mEp)); + dev_err(mEp->udc->dev, "%02X: -EINVAL\n", _usb_addr(mEp)); return; } @@ -2542,17 +2527,17 @@ static int ci13xxx_wakeup(struct usb_gadget *_gadget) unsigned long flags; int ret = 0; - trace(); + trace(udc->dev, ""); spin_lock_irqsave(&udc->lock, flags); if (!udc->remote_wakeup) { ret = -EOPNOTSUPP; - trace("remote wakeup feature is not enabled\n"); + trace(udc->dev, "remote wakeup feature is not enabled\n"); goto out; } if (!hw_read(udc, OP_PORTSC, PORTSC_SUSP)) { ret = -EINVAL; - trace("port is not suspended\n"); + trace(udc->dev, "port is not suspended\n"); goto out; } hw_write(udc, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); @@ -2602,7 +2587,7 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, int i, j; int retval = -ENOMEM; - trace("%p", driver); + trace(udc->dev, "%p", driver); if (driver == NULL || bind == NULL || @@ -2632,7 +2617,7 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, spin_lock_irqsave(&udc->lock, flags); - info("hw_ep_max = %d", udc->hw_ep_max); + dev_info(udc->dev, "hw_ep_max = %d\n", udc->hw_ep_max); udc->gadget.dev.driver = NULL; @@ -2740,7 +2725,7 @@ static int ci13xxx_stop(struct usb_gadget_driver *driver) struct ci13xxx *udc = _udc; unsigned long i, flags; - trace("%p", driver); + trace(udc->dev, "%p", driver); if (driver == NULL || driver->unbind == NULL || @@ -2813,10 +2798,10 @@ static irqreturn_t udc_irq(int irq, void *data) irqreturn_t retval; u32 intr; - trace(); + trace(udc ? udc->dev : NULL, ""); if (udc == NULL) { - pr_err("ENODEV\n"); + dev_err(udc->dev, "ENODEV"); return IRQ_HANDLED; } @@ -2885,10 +2870,7 @@ static irqreturn_t udc_irq(int irq, void *data) */ static void udc_release(struct device *dev) { - trace("%p", dev); - - if (dev == NULL) - pr_err("EINVAL\n"); + trace(dev->parent, "%p", dev); } /** @@ -2907,7 +2889,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, struct ci13xxx *udc; int retval = 0; - trace("%p, %p, %p", dev, regs, driver->name); + trace(dev, "%p, %p, %p", dev, regs, driver->name); if (dev == NULL || regs == NULL || driver == NULL || driver->name == NULL) @@ -2936,6 +2918,8 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, udc->gadget.dev.parent = dev; udc->gadget.dev.release = udc_release; + udc->dev = dev; + retval = hw_device_init(udc, regs, driver->capoffset); if (retval < 0) goto free_udc; @@ -3015,10 +2999,9 @@ static void udc_remove(void) { struct ci13xxx *udc = _udc; - if (udc == NULL) { - pr_err("EINVAL\n"); + if (udc == NULL) return; - } + usb_del_gadget_udc(&udc->gadget); if (udc->transceiver) { diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h index f605090..a12fa56 100644 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -134,6 +134,7 @@ struct ci13xxx { struct dma_pool *td_pool; /* DMA pool for transfer descs */ struct usb_request *status; /* ep0 status request */ + struct device *dev; struct usb_gadget gadget; /* USB slave device */ struct ci13xxx_ep ci13xxx_ep[ENDPT_MAX]; /* extended endpts */ u32 ep0_dir; /* ep0 direction */ @@ -245,24 +246,18 @@ enum ci13xxx_regs { /****************************************************************************** * LOGGING *****************************************************************************/ -#define ci13xxx_printk(level, format, args...) \ -do { \ - if (_udc == NULL) \ - printk(level "[%s] " format "\n", __func__, ## args); \ - else \ - dev_printk(level, _udc->gadget.dev.parent, \ - "[%s] " format "\n", __func__, ## args); \ -} while (0) - -#define warn(format, args...) ci13xxx_printk(KERN_WARNING, format, ## args) -#define info(format, args...) ci13xxx_printk(KERN_INFO, format, ## args) - #ifdef TRACE -#define trace(format, args...) ci13xxx_printk(KERN_DEBUG, format, ## args) -#define dbg_trace(format, args...) dev_dbg(dev, format, ##args) +#define trace(dev, format, args...) \ + do { \ + if (dev == NULL) \ + pr_debug("[%s] " format "\n", __func__, \ + ## args); \ + else \ + dev_printk(KERN_DEBUG, dev, "[%s] " format "\n", \ + __func__, ## args); \ + } while (0) #else -#define trace(format, args...) do {} while (0) -#define dbg_trace(format, args...) do {} while (0) +#define trace(dev, format, args...) do {} while (0) #endif #endif /* _CI13XXX_h_ */ -- cgit v0.10.2 From 790c2d52b24e2ecd00ca014821c1adc41be2ac94 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 8 May 2012 23:29:03 +0300 Subject: usb: gadget: ci13xxx: move endpoint (de-)initialization to probe/remove Currently, endpoints are initialized in gadget start/stop methods, however for the new style gadgets it is expected that bind() can be called before controller's start(), and we need endpoints already initialized at that point. So, move endpoint initialization to controller's probe before we switch to the "new style" gadget framework. Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index ce50af9..c18068d 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -2571,58 +2571,11 @@ static const struct usb_gadget_ops usb_gadget_ops = { .stop = ci13xxx_stop, }; -/** - * ci13xxx_start: register a gadget driver - * @driver: the driver being registered - * @bind: the driver's bind callback - * - * Check ci13xxx_start() at for details. - * Interrupts are enabled here. - */ -static int ci13xxx_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int init_eps(struct ci13xxx *udc) { - struct ci13xxx *udc = _udc; - unsigned long flags; - int i, j; - int retval = -ENOMEM; - - trace(udc->dev, "%p", driver); - - if (driver == NULL || - bind == NULL || - driver->setup == NULL || - driver->disconnect == NULL) - return -EINVAL; - else if (udc == NULL) - return -ENODEV; - else if (udc->driver != NULL) - return -EBUSY; - - /* alloc resources */ - udc->qh_pool = dma_pool_create("ci13xxx_qh", &udc->gadget.dev, - sizeof(struct ci13xxx_qh), - 64, CI13XXX_PAGE_SIZE); - if (udc->qh_pool == NULL) - return -ENOMEM; + int retval = 0, i, j; - udc->td_pool = dma_pool_create("ci13xxx_td", &udc->gadget.dev, - sizeof(struct ci13xxx_td), - 64, CI13XXX_PAGE_SIZE); - if (udc->td_pool == NULL) { - dma_pool_destroy(udc->qh_pool); - udc->qh_pool = NULL; - return -ENOMEM; - } - - spin_lock_irqsave(&udc->lock, flags); - - dev_info(udc->dev, "hw_ep_max = %d\n", udc->hw_ep_max); - - udc->gadget.dev.driver = NULL; - - retval = 0; - for (i = 0; i < udc->hw_ep_max/2; i++) { + for (i = 0; i < udc->hw_ep_max/2; i++) for (j = RX; j <= TX; j++) { int k = i + j * udc->hw_ep_max/2; struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k]; @@ -2640,10 +2593,8 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; INIT_LIST_HEAD(&mEp->qh.queue); - spin_unlock_irqrestore(&udc->lock, flags); mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL, - &mEp->qh.dma); - spin_lock_irqsave(&udc->lock, flags); + &mEp->qh.dma); if (mEp->qh.ptr == NULL) retval = -ENOMEM; else @@ -2664,9 +2615,43 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list); } - } - if (retval) - goto done; + + return retval; +} + +/** + * ci13xxx_start: register a gadget driver + * @driver: the driver being registered + * @bind: the driver's bind callback + * + * Check ci13xxx_start() at for details. + * Interrupts are enabled here. + */ +static int ci13xxx_start(struct usb_gadget_driver *driver, + int (*bind)(struct usb_gadget *)) +{ + struct ci13xxx *udc = _udc; + unsigned long flags; + int i, j; + int retval = -ENOMEM; + + trace(udc->dev, "%p", driver); + + if (driver == NULL || + bind == NULL || + driver->setup == NULL || + driver->disconnect == NULL) + return -EINVAL; + else if (udc == NULL) + return -ENODEV; + else if (udc->driver != NULL) + return -EBUSY; + + spin_lock_irqsave(&udc->lock, flags); + + dev_info(udc->dev, "hw_ep_max = %d\n", udc->hw_ep_max); + + udc->gadget.dev.driver = NULL; spin_unlock_irqrestore(&udc->lock, flags); udc->ep0out->ep.desc = &ctrl_endpt_out_desc; @@ -2680,7 +2665,6 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, return retval; spin_lock_irqsave(&udc->lock, flags); - udc->gadget.ep0 = &udc->ep0in->ep; /* bind gadget */ driver->driver.bus = NULL; udc->gadget.dev.driver = &driver->driver; @@ -2754,32 +2738,10 @@ static int ci13xxx_stop(struct usb_gadget_driver *driver) spin_lock_irqsave(&udc->lock, flags); udc->gadget.dev.driver = NULL; - - /* free resources */ - for (i = 0; i < udc->hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; - - if (mEp->num) - list_del_init(&mEp->ep.ep_list); - - if (mEp->qh.ptr != NULL) - dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma); - } - - udc->gadget.ep0 = NULL; udc->driver = NULL; spin_unlock_irqrestore(&udc->lock, flags); - if (udc->td_pool != NULL) { - dma_pool_destroy(udc->td_pool); - udc->td_pool = NULL; - } - if (udc->qh_pool != NULL) { - dma_pool_destroy(udc->qh_pool); - udc->qh_pool = NULL; - } - return 0; } @@ -2920,16 +2882,39 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, udc->dev = dev; + /* alloc resources */ + udc->qh_pool = dma_pool_create("ci13xxx_qh", dev, + sizeof(struct ci13xxx_qh), + 64, CI13XXX_PAGE_SIZE); + if (udc->qh_pool == NULL) { + retval = -ENOMEM; + goto free_udc; + } + + udc->td_pool = dma_pool_create("ci13xxx_td", dev, + sizeof(struct ci13xxx_td), + 64, CI13XXX_PAGE_SIZE); + if (udc->td_pool == NULL) { + retval = -ENOMEM; + goto free_qh_pool; + } + retval = hw_device_init(udc, regs, driver->capoffset); if (retval < 0) - goto free_udc; + goto free_pools; + + retval = init_eps(udc); + if (retval) + goto free_pools; + + udc->gadget.ep0 = &udc->ep0in->ep; udc->transceiver = usb_get_transceiver(); if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) { if (udc->transceiver == NULL) { retval = -ENODEV; - goto free_udc; + goto free_pools; } } @@ -2984,6 +2969,10 @@ unreg_device: put_transceiver: if (udc->transceiver) usb_put_transceiver(udc->transceiver); +free_pools: + dma_pool_destroy(udc->td_pool); +free_qh_pool: + dma_pool_destroy(udc->qh_pool); free_udc: kfree(udc); _udc = NULL; @@ -2998,12 +2987,22 @@ free_udc: static void udc_remove(void) { struct ci13xxx *udc = _udc; + int i; if (udc == NULL) return; usb_del_gadget_udc(&udc->gadget); + for (i = 0; i < udc->hw_ep_max; i++) { + struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; + + dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma); + } + + dma_pool_destroy(udc->td_pool); + dma_pool_destroy(udc->qh_pool); + if (udc->transceiver) { otg_set_peripheral(udc->transceiver->otg, &udc->gadget); usb_put_transceiver(udc->transceiver); -- cgit v0.10.2 From 1f339d84407eda744caa5b361d67019c66532d5d Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 8 May 2012 23:29:04 +0300 Subject: usb: gadget: ci13xxx: convert to new style Finally, convert to the new style framework, using udc_start/udc_stop methods. Since there is no need in the global _udc pointer, remove it. Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index c18068d..560b539 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -96,9 +96,6 @@ ctrl_endpt_in_desc = { .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), }; -/* UDC descriptor */ -static struct ci13xxx *_udc; - /* Interrupt statistics */ #define ISR_MASK 0x1F static struct { @@ -1679,7 +1676,8 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) usb_ep_fifo_flush(&udc->ep0out->ep); usb_ep_fifo_flush(&udc->ep0in->ep); - udc->driver->disconnect(gadget); + if (udc->driver) + udc->driver->disconnect(gadget); /* make sure to disable all endpoints */ gadget_for_each_ep(ep, gadget) { @@ -1789,7 +1787,7 @@ __acquires(mEp->lock) if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { /* Assume that device is bus powered for now. */ - *(u16 *)req->buf = _udc->remote_wakeup << 1; + *(u16 *)req->buf = udc->remote_wakeup << 1; retval = 0; } else if ((setup->bRequestType & USB_RECIP_MASK) \ == USB_RECIP_ENDPOINT) { @@ -1896,7 +1894,7 @@ __acquires(mEp->lock) spin_unlock(mEp->lock); if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) && mReq->req.length) - mEpTemp = _udc->ep0in; + mEpTemp = mEp->udc->ep0in; mReq->req.complete(&mEpTemp->ep, &mReq->req); spin_lock(mEp->lock); } @@ -2276,6 +2274,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, { struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); + struct ci13xxx *udc = mEp->udc; int retval = 0; unsigned long flags; @@ -2288,8 +2287,8 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { if (req->length) - mEp = (_udc->ep0_dir == RX) ? - _udc->ep0out : _udc->ep0in; + mEp = (udc->ep0_dir == RX) ? + udc->ep0out : udc->ep0in; if (!list_empty(&mEp->qh.queue)) { _ep_nuke(mEp); retval = -EOVERFLOW; @@ -2555,9 +2554,10 @@ static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA) return -ENOTSUPP; } -static int ci13xxx_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int ci13xxx_stop(struct usb_gadget_driver *driver); +static int ci13xxx_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); +static int ci13xxx_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); /** * Device operations part of the API to the USB controller hardware, * which don't involve endpoints (or i/o) @@ -2567,8 +2567,8 @@ static const struct usb_gadget_ops usb_gadget_ops = { .vbus_session = ci13xxx_vbus_session, .wakeup = ci13xxx_wakeup, .vbus_draw = ci13xxx_vbus_draw, - .start = ci13xxx_start, - .stop = ci13xxx_stop, + .udc_start = ci13xxx_start, + .udc_stop = ci13xxx_stop, }; static int init_eps(struct ci13xxx *udc) @@ -2621,39 +2621,24 @@ static int init_eps(struct ci13xxx *udc) /** * ci13xxx_start: register a gadget driver + * @gadget: our gadget * @driver: the driver being registered - * @bind: the driver's bind callback * - * Check ci13xxx_start() at for details. * Interrupts are enabled here. */ -static int ci13xxx_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int ci13xxx_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct ci13xxx *udc = _udc; + struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); unsigned long flags; - int i, j; int retval = -ENOMEM; trace(udc->dev, "%p", driver); - if (driver == NULL || - bind == NULL || - driver->setup == NULL || - driver->disconnect == NULL) + if (driver->disconnect == NULL) return -EINVAL; - else if (udc == NULL) - return -ENODEV; - else if (udc->driver != NULL) - return -EBUSY; - - spin_lock_irqsave(&udc->lock, flags); - dev_info(udc->dev, "hw_ep_max = %d\n", udc->hw_ep_max); - udc->gadget.dev.driver = NULL; - - spin_unlock_irqrestore(&udc->lock, flags); udc->ep0out->ep.desc = &ctrl_endpt_out_desc; retval = usb_ep_enable(&udc->ep0out->ep); if (retval) @@ -2665,19 +2650,6 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, return retval; spin_lock_irqsave(&udc->lock, flags); - /* bind gadget */ - driver->driver.bus = NULL; - udc->gadget.dev.driver = &driver->driver; - - spin_unlock_irqrestore(&udc->lock, flags); - retval = bind(&udc->gadget); /* MAY SLEEP */ - spin_lock_irqsave(&udc->lock, flags); - - if (retval) { - udc->gadget.dev.driver = NULL; - goto done; - } - udc->driver = driver; pm_runtime_get_sync(&udc->gadget.dev); if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) { @@ -2701,23 +2673,15 @@ static int ci13xxx_start(struct usb_gadget_driver *driver, /** * ci13xxx_stop: unregister a gadget driver - * - * Check usb_gadget_unregister_driver() at "usb_gadget.h" for details */ -static int ci13xxx_stop(struct usb_gadget_driver *driver) +static int ci13xxx_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct ci13xxx *udc = _udc; - unsigned long i, flags; + struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); + unsigned long flags; trace(udc->dev, "%p", driver); - if (driver == NULL || - driver->unbind == NULL || - driver->setup == NULL || - driver->disconnect == NULL || - driver != udc->driver) - return -EINVAL; - spin_lock_irqsave(&udc->lock, flags); if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) || @@ -2726,20 +2690,13 @@ static int ci13xxx_stop(struct usb_gadget_driver *driver) if (udc->udc_driver->notify_event) udc->udc_driver->notify_event(udc, CI13XXX_CONTROLLER_STOPPED_EVENT); + udc->driver = NULL; spin_unlock_irqrestore(&udc->lock, flags); _gadget_stop_activity(&udc->gadget); spin_lock_irqsave(&udc->lock, flags); pm_runtime_put(&udc->gadget.dev); } - /* unbind gadget */ - spin_unlock_irqrestore(&udc->lock, flags); - driver->unbind(&udc->gadget); /* MAY SLEEP */ - spin_lock_irqsave(&udc->lock, flags); - - udc->gadget.dev.driver = NULL; - udc->driver = NULL; - spin_unlock_irqrestore(&udc->lock, flags); return 0; @@ -2756,7 +2713,7 @@ static int ci13xxx_stop(struct usb_gadget_driver *driver) */ static irqreturn_t udc_irq(int irq, void *data) { - struct ci13xxx *udc = _udc; + struct ci13xxx *udc = data; irqreturn_t retval; u32 intr; @@ -2846,7 +2803,7 @@ static void udc_release(struct device *dev) * Kernel assumes 32-bit DMA operations by default, no need to dma_set_mask */ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, - void __iomem *regs) + void __iomem *regs, struct ci13xxx **_udc) { struct ci13xxx *udc; int retval = 0; @@ -2872,7 +2829,6 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, udc->gadget.name = driver->name; INIT_LIST_HEAD(&udc->gadget.ep_list); - udc->gadget.ep0 = NULL; dev_set_name(&udc->gadget.dev, "gadget"); udc->gadget.dev.dma_mask = dev->dma_mask; @@ -2950,7 +2906,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev, pm_runtime_no_callbacks(&udc->gadget.dev); pm_runtime_enable(&udc->gadget.dev); - _udc = udc; + *_udc = udc; return retval; remove_trans: @@ -2975,7 +2931,7 @@ free_qh_pool: dma_pool_destroy(udc->qh_pool); free_udc: kfree(udc); - _udc = NULL; + *_udc = NULL; return retval; } @@ -2984,9 +2940,8 @@ free_udc: * * No interrupts active, the IRQ has been released */ -static void udc_remove(void) +static void udc_remove(struct ci13xxx *udc) { - struct ci13xxx *udc = _udc; int i; if (udc == NULL) @@ -3014,13 +2969,13 @@ static void udc_remove(void) kfree(udc->hw_bank.regmap); kfree(udc); - _udc = NULL; } static int __devinit ci_udc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ci13xxx_udc_driver *driver = dev->platform_data; + struct ci13xxx *udc; struct resource *res; void __iomem *base; int ret; @@ -3042,30 +2997,33 @@ static int __devinit ci_udc_probe(struct platform_device *pdev) return -ENOMEM; } - ret = udc_probe(driver, dev, base); + ret = udc_probe(driver, dev, base, &udc); if (ret) return ret; - _udc->irq = platform_get_irq(pdev, 0); - if (_udc->irq < 0) { + udc->irq = platform_get_irq(pdev, 0); + if (udc->irq < 0) { dev_err(dev, "missing IRQ\n"); ret = -ENODEV; goto out; } - ret = request_irq(_udc->irq, udc_irq, IRQF_SHARED, driver->name, _udc); + platform_set_drvdata(pdev, udc); + ret = request_irq(udc->irq, udc_irq, IRQF_SHARED, driver->name, udc); out: if (ret) - udc_remove(); + udc_remove(udc); return ret; } static int __devexit ci_udc_remove(struct platform_device *pdev) { - free_irq(_udc->irq, _udc); - udc_remove(); + struct ci13xxx *udc = platform_get_drvdata(pdev); + + free_irq(udc->irq, udc); + udc_remove(udc); return 0; } -- cgit v0.10.2 From 7b18389dd4fe0b178117b09d054e214297f7e677 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Wed, 9 May 2012 10:31:35 +0300 Subject: ARM: OMAP: USB: fix warning on EHCI PHY reset path When PHY reset pin is connected to a GPIO on external GPIO chip (e.g. I2C), we should not call the gpio_set_value() function, but gpio_set_value_cansleep(). Signed-off-by: Igor Grinberg Acked-by: Felipe Balbi Tested-by: Govindraj.R Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index e669c6a..a44294d 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -249,10 +249,10 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) udelay(10); if (gpio_is_valid(pdata->reset_gpio_port[0])) - gpio_set_value(pdata->reset_gpio_port[0], 1); + gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1); if (gpio_is_valid(pdata->reset_gpio_port[1])) - gpio_set_value(pdata->reset_gpio_port[1], 1); + gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); } ret = usb_add_hcd(hcd, irq, IRQF_SHARED); -- cgit v0.10.2 From 7a82f612fa3aadb5676184ae202903f5a42e4f4a Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 9 May 2012 10:49:41 +0200 Subject: USB: ohci-at91: use resource_size() for memory/io resource length Signed-off-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 476fb4d..d4608c2 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -129,7 +129,7 @@ static int __devinit usb_hcd_at91_probe(const struct hc_driver *driver, if (!hcd) return -ENOMEM; hcd->rsrc_start = pdev->resource[0].start; - hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; + hcd->rsrc_len = resource_size(&pdev->resource[0]); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { pr_debug("request_mem_region failed\n"); -- cgit v0.10.2 From 07e4e556eff4938eb2edf2591de3aa7d7fb82b52 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 9 May 2012 10:48:54 +0200 Subject: USB: ohci-at91: add a reset function to fix race condition A possible race condition appears because we are not initializing the ohci->regs before calling usb_hcd_request_irqs(). We move the call to ohci_init() in hcd->driver->reset() instead of hcd->driver->start() to fix this. This was experienced when we share the same IRQ line between OHCI and EHCI controllers. Signed-off-by: Nicolas Ferre Tested-by: Christian Eggers Cc: stable Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index d4608c2..a665b3e 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -223,7 +223,7 @@ static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd, /*-------------------------------------------------------------------------*/ static int __devinit -ohci_at91_start (struct usb_hcd *hcd) +ohci_at91_reset (struct usb_hcd *hcd) { struct at91_usbh_data *board = hcd->self.controller->platform_data; struct ohci_hcd *ohci = hcd_to_ohci (hcd); @@ -233,6 +233,14 @@ ohci_at91_start (struct usb_hcd *hcd) return ret; ohci->num_ports = board->ports; + return 0; +} + +static int __devinit +ohci_at91_start (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + int ret; if ((ret = ohci_run(ohci)) < 0) { dev_err(hcd->self.controller, "can't start %s\n", @@ -419,6 +427,7 @@ static const struct hc_driver ohci_at91_hc_driver = { /* * basic lifecycle operations */ + .reset = ohci_at91_reset, .start = ohci_at91_start, .stop = ohci_stop, .shutdown = ohci_shutdown, -- cgit v0.10.2 From 126625e1bf3228a3db7359310344617bee878517 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Wed, 9 May 2012 13:16:53 +0200 Subject: usb:hsotg:samsung:cosmetic Move to proper place This commit adds a cosmetic change to the s3c-hsotg UDC driver. It moves s3c-hsotg.h to other linux/ related inclusions. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Greg Kroah-Hartman diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 9c97d7c..2c6d701 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -25,6 +25,7 @@ #include #include #include +#include #include