From f54a52021d7ad039c16fe5a1e094d8f0394d90ec Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 6 Nov 2009 18:32:44 +0100 Subject: b43: Rewrite TX bounce buffer handling Do not mess with the original skb, but allocate an independent bouncebuffer. This protects against bad interference with mac80211's assumptions about the skb (which already caused bugs). Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index de4e804..b5cd7f5 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1157,18 +1157,17 @@ struct b43_dmaring *parse_cookie(struct b43_wldev *dev, u16 cookie, int *slot) } static int dma_tx_fragment(struct b43_dmaring *ring, - struct sk_buff **in_skb) + struct sk_buff *skb) { - struct sk_buff *skb = *in_skb; const struct b43_dma_ops *ops = ring->ops; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct b43_private_tx_info *priv_info = b43_get_priv_tx_info(info); u8 *header; int slot, old_top_slot, old_used_slots; int err; struct b43_dmadesc_generic *desc; struct b43_dmadesc_meta *meta; struct b43_dmadesc_meta *meta_hdr; - struct sk_buff *bounce_skb; u16 cookie; size_t hdrsize = b43_txhdr_size(ring->dev); @@ -1212,34 +1211,28 @@ static int dma_tx_fragment(struct b43_dmaring *ring, meta->skb = skb; meta->is_last_fragment = 1; + priv_info->bouncebuffer = NULL; meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1); /* create a bounce buffer in zone_dma on mapping failure. */ if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) { - bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA); - if (!bounce_skb) { + priv_info->bouncebuffer = kmalloc(skb->len, GFP_ATOMIC | GFP_DMA); + if (!priv_info->bouncebuffer) { ring->current_slot = old_top_slot; ring->used_slots = old_used_slots; err = -ENOMEM; goto out_unmap_hdr; } + memcpy(priv_info->bouncebuffer, skb->data, skb->len); - memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len); - memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb)); - bounce_skb->dev = skb->dev; - skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb)); - info = IEEE80211_SKB_CB(bounce_skb); - - dev_kfree_skb_any(skb); - skb = bounce_skb; - *in_skb = bounce_skb; - meta->skb = skb; - meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1); + meta->dmaaddr = map_descbuffer(ring, priv_info->bouncebuffer, skb->len, 1); if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) { + kfree(priv_info->bouncebuffer); + priv_info->bouncebuffer = NULL; ring->current_slot = old_top_slot; ring->used_slots = old_used_slots; err = -EIO; - goto out_free_bounce; + goto out_unmap_hdr; } } @@ -1256,8 +1249,6 @@ static int dma_tx_fragment(struct b43_dmaring *ring, ops->poke_tx(ring, next_slot(ring, slot)); return 0; -out_free_bounce: - dev_kfree_skb_any(skb); out_unmap_hdr: unmap_descbuffer(ring, meta_hdr->dmaaddr, hdrsize, 1); @@ -1362,11 +1353,7 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb) * static, so we don't need to store it per frame. */ ring->queue_prio = skb_get_queue_mapping(skb); - /* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing - * into the skb data or cb now. */ - hdr = NULL; - info = NULL; - err = dma_tx_fragment(ring, &skb); + err = dma_tx_fragment(ring, skb); if (unlikely(err == -ENOKEY)) { /* Drop this packet, as we don't have the encryption key * anymore and must not transmit it unencrypted. */ @@ -1413,12 +1400,17 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, B43_WARN_ON(!(slot >= 0 && slot < ring->nr_slots)); desc = ops->idx2desc(ring, slot, &meta); - if (meta->skb) - unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len, - 1); - else + if (meta->skb) { + struct b43_private_tx_info *priv_info = + b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb)); + + unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len, 1); + kfree(priv_info->bouncebuffer); + priv_info->bouncebuffer = NULL; + } else { unmap_descbuffer(ring, meta->dmaaddr, b43_txhdr_size(dev), 1); + } if (meta->is_last_fragment) { struct ieee80211_tx_info *info; diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h index 3530de8..d23ff9f 100644 --- a/drivers/net/wireless/b43/xmit.h +++ b/drivers/net/wireless/b43/xmit.h @@ -2,6 +2,8 @@ #define B43_XMIT_H_ #include "main.h" +#include + #define _b43_declare_plcp_hdr(size) \ struct b43_plcp_hdr##size { \ @@ -332,4 +334,21 @@ static inline u8 b43_kidx_to_raw(struct b43_wldev *dev, u8 firmware_kidx) return raw_kidx; } +/* struct b43_private_tx_info - TX info private to b43. + * The structure is placed in (struct ieee80211_tx_info *)->rate_driver_data + * + * @bouncebuffer: DMA Bouncebuffer (if used) + */ +struct b43_private_tx_info { + void *bouncebuffer; +}; + +static inline struct b43_private_tx_info * +b43_get_priv_tx_info(struct ieee80211_tx_info *info) +{ + BUILD_BUG_ON(sizeof(struct b43_private_tx_info) > + sizeof(info->rate_driver_data)); + return (struct b43_private_tx_info *)info->rate_driver_data; +} + #endif /* B43_XMIT_H_ */ -- cgit v0.10.2 From cf7ff8dfe64c8ca8a71b4fcbac357a3476ed1888 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Fri, 6 Nov 2009 14:52:44 -0800 Subject: iwlwifi: change debug message to error in failure case Since these messages indicate failure we would be interested in seeing them always. Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index 905645d..e8002c1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -199,13 +199,13 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd) } if (test_bit(STATUS_RF_KILL_HW, &priv->status)) { - IWL_DEBUG_INFO(priv, "Command %s aborted: RF KILL Switch\n", + IWL_ERR(priv, "Command %s aborted: RF KILL Switch\n", get_cmd_string(cmd->id)); ret = -ECANCELED; goto fail; } if (test_bit(STATUS_FW_ERROR, &priv->status)) { - IWL_DEBUG_INFO(priv, "Command %s failed: FW Error\n", + IWL_ERR(priv, "Command %s failed: FW Error\n", get_cmd_string(cmd->id)); ret = -EIO; goto fail; -- cgit v0.10.2 From a3b6bd5bf23c5cd95389e24121da02d2330eaf21 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Fri, 6 Nov 2009 14:52:45 -0800 Subject: iwlwifi: allocate 128 bytes linear buffer for rx skb Allocate 128 bytes linear buffer for rx skb. The first 64 bytes is reserved for mac80211 usage (for radiotap header expansion, etc). The frame header starts from the second 64 bytes. Cc: Johannes Berg Signed-off-by: Zhu Yi Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 09a7bd2..26a1134 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -564,7 +564,7 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl_priv *priv, return; } - skb = alloc_skb(IWL_LINK_HDR_MAX, GFP_ATOMIC); + skb = alloc_skb(IWL_LINK_HDR_MAX * 2, GFP_ATOMIC); if (!skb) { IWL_ERR(priv, "alloc_skb failed\n"); return; @@ -575,6 +575,7 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl_priv *priv, (struct ieee80211_hdr *)rxb_addr(rxb), le32_to_cpu(rx_end->status), stats); + skb_reserve(skb, IWL_LINK_HDR_MAX); skb_add_rx_frag(skb, 0, rxb->page, (void *)rx_hdr->payload - (void *)pkt, len); diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index e5339c9..d2dc7cc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -937,12 +937,13 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats)) return; - skb = alloc_skb(IWL_LINK_HDR_MAX, GFP_ATOMIC); + skb = alloc_skb(IWL_LINK_HDR_MAX * 2, GFP_ATOMIC); if (!skb) { IWL_ERR(priv, "alloc_skb failed\n"); return; } + skb_reserve(skb, IWL_LINK_HDR_MAX); skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len); /* mac80211 currently doesn't support paged SKB. Convert it to -- cgit v0.10.2 From a643565efcdafdc37638aa5131ced91b2d3ddcb2 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 6 Nov 2009 14:52:46 -0800 Subject: iwlwifi: print rx_on config to help debug To help debug rx related issues, if IWL_DEBUG_RADIO flag is set, print the rxon configuration when rxon host command send to uCode. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index b5fe8f8..1710815 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -133,6 +133,7 @@ int iwl_commit_rxon(struct iwl_priv *priv) } memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); + iwl_print_rx_config_cmd(priv); return 0; } @@ -228,6 +229,7 @@ int iwl_commit_rxon(struct iwl_priv *priv) } memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); } + iwl_print_rx_config_cmd(priv); iwl_init_sensitivity(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index e0b5b4a..f88a1cb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1328,7 +1328,7 @@ void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) EXPORT_SYMBOL(iwl_rx_csa); #ifdef CONFIG_IWLWIFI_DEBUG -static void iwl_print_rx_config_cmd(struct iwl_priv *priv) +void iwl_print_rx_config_cmd(struct iwl_priv *priv) { struct iwl_rxon_cmd *rxon = &priv->staging_rxon; @@ -1346,6 +1346,7 @@ static void iwl_print_rx_config_cmd(struct iwl_priv *priv) IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr); IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); } +EXPORT_SYMBOL(iwl_print_rx_config_cmd); #endif /** * iwl_irq_handle_error - called for HW or SW error interrupt from card diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 9574d8f..3f97036 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -579,6 +579,7 @@ int iwl_pci_resume(struct pci_dev *pdev); #ifdef CONFIG_IWLWIFI_DEBUG void iwl_dump_nic_event_log(struct iwl_priv *priv); void iwl_dump_nic_error_log(struct iwl_priv *priv); +void iwl_print_rx_config_cmd(struct iwl_priv *priv); #else static inline void iwl_dump_nic_event_log(struct iwl_priv *priv) { @@ -587,6 +588,10 @@ static inline void iwl_dump_nic_event_log(struct iwl_priv *priv) static inline void iwl_dump_nic_error_log(struct iwl_priv *priv) { } + +static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv) +{ +} #endif void iwl_clear_isr_stats(struct iwl_priv *priv); -- cgit v0.10.2 From f1e3d7d428616c04ef71bee3c2b6f274b8947755 Mon Sep 17 00:00:00 2001 From: Shanyu Zhao Date: Fri, 6 Nov 2009 14:52:47 -0800 Subject: iwlwifi: use only one chain for scan in PS When doing scan in power saving mode, choose only 1 valid RX chain instead of turning all chains on. Signed-off-by: Shanyu Zhao Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 1eb0d0b..48bc263 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -581,6 +581,7 @@ static void iwl_bg_request_scan(struct work_struct *data) u8 rate; bool is_active = false; int chan_mod; + u8 active_chains; conf = ieee80211_get_hw_conf(priv->hw); @@ -734,9 +735,22 @@ static void iwl_bg_request_scan(struct work_struct *data) rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]); scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags); + /* In power save mode use one chain, otherwise use all chains */ + if (test_bit(STATUS_POWER_PMI, &priv->status)) { + /* rx_ant has been set to all valid chains previously */ + active_chains = rx_ant & + ((u8)(priv->chain_noise_data.active_chains)); + if (!active_chains) + active_chains = rx_ant; + + IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n", + priv->chain_noise_data.active_chains); + + rx_ant = first_antenna(active_chains); + } /* MIMO is not used here, but value is required */ rx_chain |= ANT_ABC << RXON_RX_CHAIN_VALID_POS; - rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; + rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; scan->rx_chain = cpu_to_le16(rx_chain); -- cgit v0.10.2 From b23aa883678aec0f5d9e96c9b3e416ec4fdf735e Mon Sep 17 00:00:00 2001 From: Shanyu Zhao Date: Fri, 6 Nov 2009 14:52:48 -0800 Subject: iwlwifi: use configured valid rx chain for scan Use configured valid rx chains in scan command instead of ANT_ABC, correcting valid rx chain configuration of 4965, should be ANT_ABC instead of ANT_AB. Signed-off-by: Shanyu Zhao Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 1ff465a..faa4c4e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2228,7 +2228,7 @@ struct iwl_cfg iwl4965_agn_cfg = { .num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES, .mod_params = &iwl4965_mod_params, .valid_tx_ant = ANT_AB, - .valid_rx_ant = ANT_AB, + .valid_rx_ant = ANT_ABC, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = true, diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 48bc263..a2b2b83 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -749,7 +749,7 @@ static void iwl_bg_request_scan(struct work_struct *data) rx_ant = first_antenna(active_chains); } /* MIMO is not used here, but value is required */ - rx_chain |= ANT_ABC << RXON_RX_CHAIN_VALID_POS; + rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; -- cgit v0.10.2 From 0748dc1fcd8589c0e215e26112320b76e7c9a262 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 6 Nov 2009 14:52:49 -0800 Subject: iwlwifi: no periodic Tx/IQ calibration for 6x00/6x50 series For both 6x00 and 6x50 series devices, periodic Tx IQ calibration is disabled in uCode, driver do not need to set the periodic Tx/IQ calibration bit in calibration command. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 70e117f..9ab7954 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -166,9 +166,7 @@ static int iwl6000_hw_set_hw_params(struct iwl_priv *priv) BIT(IWL_CALIB_XTAL) | BIT(IWL_CALIB_LO) | BIT(IWL_CALIB_TX_IQ) | - BIT(IWL_CALIB_TX_IQ_PERD) | BIT(IWL_CALIB_BASE_BAND); - return 0; } -- cgit v0.10.2 From a221e6f7b48ee2d9352827af8aec8b49272b5b43 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 6 Nov 2009 14:52:50 -0800 Subject: iwlwifi: don't double-activate queue 4 The fourth queue (command queue) is already activated in the loop above that also maps it to the command FIFO and therefore doesn't need to be marked as activated again. Also change the TODO comment to be accurate -- we need to initialise the _queues_, not FIFOs, and map them to device FIFOs. Signed-off-by: Johannes Berg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 910217f..6ea5e2d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -661,9 +661,13 @@ int iwl5000_alive_notify(struct iwl_priv *priv) iwl_txq_ctx_activate(priv, i); iwl5000_tx_queue_set_status(priv, &priv->txq[i], ac, 0); } - /* TODO - need to initialize those FIFOs inside the loop above, - * not only mark them as active */ - iwl_txq_ctx_activate(priv, 4); + + /* + * TODO - need to initialize these queues and map them to FIFOs + * in the loop above, not only mark them as active. We do this + * because we want the first aggregation queue to be queue #10, + * but do not use 8 or 9 otherwise yet. + */ iwl_txq_ctx_activate(priv, 7); iwl_txq_ctx_activate(priv, 8); iwl_txq_ctx_activate(priv, 9); -- cgit v0.10.2 From 1a716557a5ed3b814cb32b8be79848d53e470871 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 6 Nov 2009 14:52:51 -0800 Subject: iwlwifi: fix FIFO vs. queue confusion When I added that code setting the swq_id, I evidently did not understand the distinction between FIFO and TX queue yet and added code to compare a queue ID and a FIFO number, which is bogus. However, the code there need not be this specific, it can just set all queues to the identity mapping which will be overwritten by the aggregation queue code. As a bit of defensive coding, don't assign an swq_id to the command queue so that if we ever use it for frames we notice quickly. Signed-off-by: Johannes Berg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index cb2642c..b4e8145 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -324,8 +324,9 @@ struct iwl_channel_info { #define IWL_MIN_NUM_QUEUES 10 /* - * uCode queue management definitions ... - * Queue #4 is the command queue for 3945/4965/5x00/1000/6x00. + * Queue #4 is the command queue for 3945/4965/5x00/1000/6x00, + * the driver maps it into the appropriate device FIFO for the + * uCode. */ #define IWL_CMD_QUEUE_NUM 4 diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 05e7510..905ceca 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -364,8 +364,13 @@ int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq, txq->need_update = 0; - /* aggregation TX queues will get their ID when aggregation begins */ - if (txq_id <= IWL_TX_FIFO_AC3) + /* + * Aggregation TX queues will get their ID when aggregation begins; + * they overwrite the setting done here. The command FIFO doesn't + * need an swq_id so don't set one to catch errors, all others can + * be set up to the identity mapping. + */ + if (txq_id != IWL_CMD_QUEUE_NUM) txq->swq_id = txq_id; /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise -- cgit v0.10.2 From bed0a68f98d93c0abdc96b4c290a92c80234c182 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 6 Nov 2009 14:52:52 -0800 Subject: iwlwifi: remove un-used parameter Remove un-used parameter "recovery_rxon" from "priv" data structure Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index b4e8145..9975645 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -1087,8 +1087,6 @@ struct iwl_priv { const struct iwl_rxon_cmd active_rxon; struct iwl_rxon_cmd staging_rxon; - struct iwl_rxon_cmd recovery_rxon; - /* 1st responses from initialize and runtime uCode images. * 4965's initialize alive response contains some calibration data. */ struct iwl_init_alive_resp card_alive_init; -- cgit v0.10.2 From 681988653ed46a14032ac5fe2ee84eaae314b72e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 6 Nov 2009 14:52:53 -0800 Subject: iwlwifi: add FIFO usage for 5000 This is part of the code, but the comment doesn't have it, add pointers to the code and the FIFO usage for 5000 and up. Signed-off-by: Johannes Berg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index d393e8f..6d95832 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -254,7 +254,8 @@ * device. A queue maps to only one (selectable by driver) Tx DMA channel, * but one DMA channel may take input from several queues. * - * Tx DMA channels have dedicated purposes. For 4965, they are used as follows: + * Tx DMA channels have dedicated purposes. For 4965, they are used as follows + * (cf. default_queue_to_tx_fifo in iwl-4965.c): * * 0 -- EDCA BK (background) frames, lowest priority * 1 -- EDCA BE (best effort) frames, normal priority @@ -265,9 +266,21 @@ * 6 -- HCCA long frames * 7 -- not used by driver (device-internal only) * + * For 5000 series and up, they are used slightly differently + * (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c): + * + * 0 -- EDCA BK (background) frames, lowest priority + * 1 -- EDCA BE (best effort) frames, normal priority + * 2 -- EDCA VI (video) frames, higher priority + * 3 -- EDCA VO (voice) and management frames, highest priority + * 4 -- (TBD) + * 5 -- HCCA short frames + * 6 -- HCCA long frames + * 7 -- Commands + * * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. - * In addition, driver can map queues 7-15 to Tx DMA/FIFO channels 0-3 to - * support 11n aggregation via EDCA DMA channels. + * In addition, driver can map the remaining queues to Tx DMA/FIFO + * channels 0-3 to support 11n aggregation via EDCA DMA channels. * * The driver sets up each queue to work in one of two modes: * -- cgit v0.10.2 From 0924e519a3a18ffbfaa043f4a2c369140c5a235c Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 6 Nov 2009 14:52:54 -0800 Subject: iwlwifi: fix for channel switch Different channel has different configuration, need to pass correct configuration to uCode when send "channel switch" command to uCode. Invalid configuration will cause sysassert in uCode and produce un-expected result. Even it is a very small windows, but we also need to consider and handle the case if commit_rxon occurred before the "channel switch announcement" notification received from uCode. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index faa4c4e..1d22ea3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1449,14 +1449,14 @@ static int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel) is_ht40 = is_ht40_channel(priv->staging_rxon.flags); if (is_ht40 && - (priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK)) + (priv->staging_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK)) ctrl_chan_high = 1; cmd.band = band; cmd.expect_beacon = 0; cmd.channel = cpu_to_le16(channel); - cmd.rxon_flags = priv->active_rxon.flags; - cmd.rxon_filter_flags = priv->active_rxon.filter_flags; + cmd.rxon_flags = priv->staging_rxon.flags; + cmd.rxon_filter_flags = priv->staging_rxon.filter_flags; cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); if (ch_info) cmd.expect_beacon = is_channel_radar(ch_info); @@ -1473,8 +1473,10 @@ static int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel) return rc; } - rc = iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd); - return rc; + priv->switch_rxon.channel = cpu_to_le16(channel); + priv->switch_rxon.switch_in_progress = true; + + return iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd); } /** diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 6ea5e2d..6eaf26b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1391,8 +1391,8 @@ static int iwl5000_hw_channel_switch(struct iwl_priv *priv, u16 channel) priv->active_rxon.channel, channel); cmd.band = priv->band == IEEE80211_BAND_2GHZ; cmd.channel = cpu_to_le16(channel); - cmd.rxon_flags = priv->active_rxon.flags; - cmd.rxon_filter_flags = priv->active_rxon.filter_flags; + cmd.rxon_flags = priv->staging_rxon.flags; + cmd.rxon_filter_flags = priv->staging_rxon.filter_flags; cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); ch_info = iwl_get_channel_info(priv, priv->band, channel); if (ch_info) @@ -1402,6 +1402,8 @@ static int iwl5000_hw_channel_switch(struct iwl_priv *priv, u16 channel) priv->active_rxon.channel, channel); return -EFAULT; } + priv->switch_rxon.channel = cpu_to_le16(channel); + priv->switch_rxon.switch_in_progress = true; return iwl_send_cmd_sync(priv, &hcmd); } diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 9ab7954..1f769ea 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -186,8 +186,8 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, u16 channel) cmd.band = priv->band == IEEE80211_BAND_2GHZ; cmd.channel = cpu_to_le16(channel); - cmd.rxon_flags = priv->active_rxon.flags; - cmd.rxon_filter_flags = priv->active_rxon.filter_flags; + cmd.rxon_flags = priv->staging_rxon.flags; + cmd.rxon_filter_flags = priv->staging_rxon.filter_flags; cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); ch_info = iwl_get_channel_info(priv, priv->band, channel); if (ch_info) @@ -197,6 +197,8 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, u16 channel) priv->active_rxon.channel, channel); return -EFAULT; } + priv->switch_rxon.channel = cpu_to_le16(channel); + priv->switch_rxon.switch_in_progress = true; return iwl_send_cmd_sync(priv, &hcmd); } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 1710815..7bdedf6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -122,6 +122,17 @@ int iwl_commit_rxon(struct iwl_priv *priv) return -EINVAL; } + /* + * receive commit_rxon request + * abort any previous channel switch if still in process + */ + if (priv->switch_rxon.switch_in_progress && + (priv->switch_rxon.channel != priv->staging_rxon.channel)) { + IWL_DEBUG_11H(priv, "abort channel switch on %d\n", + le16_to_cpu(priv->switch_rxon.channel)); + priv->switch_rxon.switch_in_progress = false; + } + /* If we don't need to send a full RXON, we can use * iwl_rxon_assoc_cmd which is used to reconfigure filter * and other flags for the current radio configuration. */ diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index f88a1cb..e0edc60 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1316,14 +1316,19 @@ void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) struct iwl_rxon_cmd *rxon = (void *)&priv->active_rxon; struct iwl_csa_notification *csa = &(pkt->u.csa_notif); - if (!le32_to_cpu(csa->status)) { - rxon->channel = csa->channel; - priv->staging_rxon.channel = csa->channel; - IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", - le16_to_cpu(csa->channel)); - } else - IWL_ERR(priv, "CSA notif (fail) : channel %d\n", - le16_to_cpu(csa->channel)); + if (priv->switch_rxon.switch_in_progress) { + if (!le32_to_cpu(csa->status) && + (csa->channel == priv->switch_rxon.channel)) { + rxon->channel = csa->channel; + priv->staging_rxon.channel = csa->channel; + IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", + le16_to_cpu(csa->channel)); + } else + IWL_ERR(priv, "CSA notif (fail) : channel %d\n", + le16_to_cpu(csa->channel)); + + priv->switch_rxon.switch_in_progress = false; + } } EXPORT_SYMBOL(iwl_rx_csa); @@ -2690,14 +2695,6 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) goto set_ch_out; } - if (iwl_is_associated(priv) && - (le16_to_cpu(priv->active_rxon.channel) != ch) && - priv->cfg->ops->lib->set_channel_switch) { - ret = priv->cfg->ops->lib->set_channel_switch(priv, - ch); - goto out; - } - spin_lock_irqsave(&priv->lock, flags); /* Configure HT40 channels */ @@ -2732,6 +2729,22 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) iwl_set_flags_for_band(priv, conf->channel->band); spin_unlock_irqrestore(&priv->lock, flags); + if (iwl_is_associated(priv) && + (le16_to_cpu(priv->active_rxon.channel) != ch) && + priv->cfg->ops->lib->set_channel_switch) { + iwl_set_rate(priv); + /* + * at this point, staging_rxon has the + * configuration for channel switch + */ + ret = priv->cfg->ops->lib->set_channel_switch(priv, + ch); + if (!ret) { + iwl_print_rx_config_cmd(priv); + goto out; + } + priv->switch_rxon.switch_in_progress = false; + } set_ch_out: /* The list of supported rates and rate mask can be different * for each band; since the band may have changed, reset diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 9975645..9a19a3d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -994,6 +994,17 @@ struct traffic_stats { }; #endif +/* + * iwl_switch_rxon: "channel switch" structure + * + * @ switch_in_progress: channel switch in progress + * @ channel: new channel + */ +struct iwl_switch_rxon { + bool switch_in_progress; + __le16 channel; +}; + struct iwl_priv { /* ieee device used by generic ieee processing code */ @@ -1087,6 +1098,8 @@ struct iwl_priv { const struct iwl_rxon_cmd active_rxon; struct iwl_rxon_cmd staging_rxon; + struct iwl_switch_rxon switch_rxon; + /* 1st responses from initialize and runtime uCode images. * 4965's initialize alive response contains some calibration data. */ struct iwl_init_alive_resp card_alive_init; -- cgit v0.10.2 From 740e7f51c226076d8f8ccb203d9ba6258a5bcec7 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 6 Nov 2009 14:52:55 -0800 Subject: iwlwifi: drop non-production PCI-IDs Remove the support for all the PCI_IDs never make into production Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 1f769ea..f732f6d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -90,11 +90,7 @@ static void iwl6000_nic_config(struct iwl_priv *priv) CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); /* no locking required for register write */ - if (priv->cfg->pa_type == IWL_PA_HYBRID) { - /* 2x2 hybrid phy type */ - iwl_write32(priv, CSR_GP_DRIVER_REG, - CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB); - } else if (priv->cfg->pa_type == IWL_PA_INTERNAL) { + if (priv->cfg->pa_type == IWL_PA_INTERNAL) { /* 2x2 IPA phy type */ iwl_write32(priv, CSR_GP_DRIVER_REG, CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA); @@ -279,98 +275,6 @@ static struct iwl_ops iwl6050_ops = { .led = &iwlagn_led_ops, }; - -/* - * "h": Hybrid configuration, use both internal and external Power Amplifier - */ -struct iwl_cfg iwl6000h_2agn_cfg = { - .name = "6000 Series 2x2 AGN", - .fw_name_pre = IWL6000_FW_PRE, - .ucode_api_max = IWL6000_UCODE_API_MAX, - .ucode_api_min = IWL6000_UCODE_API_MIN, - .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, - .ops = &iwl6000_ops, - .eeprom_size = OTP_LOW_IMAGE_SIZE, - .eeprom_ver = EEPROM_6000_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, - .num_of_queues = IWL50_NUM_QUEUES, - .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES, - .mod_params = &iwl50_mod_params, - .valid_tx_ant = ANT_AB, - .valid_rx_ant = ANT_AB, - .pll_cfg_val = 0, - .set_l0s = true, - .use_bsm = false, - .pa_type = IWL_PA_HYBRID, - .max_ll_items = OTP_MAX_LL_ITEMS_6x00, - .shadow_ram_support = true, - .ht_greenfield_support = true, - .led_compensation = 51, - .use_rts_for_ht = true, /* use rts/cts protection */ - .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, - .supports_idle = true, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, -}; - -struct iwl_cfg iwl6000h_2abg_cfg = { - .name = "6000 Series 2x2 ABG", - .fw_name_pre = IWL6000_FW_PRE, - .ucode_api_max = IWL6000_UCODE_API_MAX, - .ucode_api_min = IWL6000_UCODE_API_MIN, - .sku = IWL_SKU_A|IWL_SKU_G, - .ops = &iwl6000_ops, - .eeprom_size = OTP_LOW_IMAGE_SIZE, - .eeprom_ver = EEPROM_6000_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, - .num_of_queues = IWL50_NUM_QUEUES, - .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES, - .mod_params = &iwl50_mod_params, - .valid_tx_ant = ANT_AB, - .valid_rx_ant = ANT_AB, - .pll_cfg_val = 0, - .set_l0s = true, - .use_bsm = false, - .pa_type = IWL_PA_HYBRID, - .max_ll_items = OTP_MAX_LL_ITEMS_6x00, - .shadow_ram_support = true, - .ht_greenfield_support = true, - .led_compensation = 51, - .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, - .supports_idle = true, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, -}; - -struct iwl_cfg iwl6000h_2bg_cfg = { - .name = "6000 Series 2x2 BG", - .fw_name_pre = IWL6000_FW_PRE, - .ucode_api_max = IWL6000_UCODE_API_MAX, - .ucode_api_min = IWL6000_UCODE_API_MIN, - .sku = IWL_SKU_G, - .ops = &iwl6000_ops, - .eeprom_size = OTP_LOW_IMAGE_SIZE, - .eeprom_ver = EEPROM_6000_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, - .num_of_queues = IWL50_NUM_QUEUES, - .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES, - .mod_params = &iwl50_mod_params, - .valid_tx_ant = ANT_AB, - .valid_rx_ant = ANT_AB, - .pll_cfg_val = 0, - .set_l0s = true, - .use_bsm = false, - .pa_type = IWL_PA_HYBRID, - .max_ll_items = OTP_MAX_LL_ITEMS_6x00, - .shadow_ram_support = true, - .ht_greenfield_support = true, - .led_compensation = 51, - .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, - .supports_idle = true, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, -}; - /* * "i": Internal configuration, use internal Power Amplifier */ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 7bdedf6..ad8a348 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3452,14 +3452,6 @@ static struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x423D, PCI_ANY_ID, iwl5150_agn_cfg)}, /* 6x00 Series */ - {IWL_PCI_DEVICE(0x008D, 0x1301, iwl6000h_2agn_cfg)}, - {IWL_PCI_DEVICE(0x008D, 0x1321, iwl6000h_2agn_cfg)}, - {IWL_PCI_DEVICE(0x008D, 0x1326, iwl6000h_2abg_cfg)}, - {IWL_PCI_DEVICE(0x008D, 0x1306, iwl6000h_2abg_cfg)}, - {IWL_PCI_DEVICE(0x008D, 0x1307, iwl6000h_2bg_cfg)}, - {IWL_PCI_DEVICE(0x008E, 0x1311, iwl6000h_2agn_cfg)}, - {IWL_PCI_DEVICE(0x008E, 0x1316, iwl6000h_2abg_cfg)}, - {IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)}, {IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)}, {IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)}, diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 9a19a3d..9dea8fa 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -927,13 +927,11 @@ enum iwl_access_mode { /** * enum iwl_pa_type - Power Amplifier type * @IWL_PA_SYSTEM: based on uCode configuration - * @IWL_PA_HYBRID: use both Internal and external PA * @IWL_PA_INTERNAL: use Internal only */ enum iwl_pa_type { IWL_PA_SYSTEM = 0, - IWL_PA_HYBRID = 1, - IWL_PA_INTERNAL = 2, + IWL_PA_INTERNAL = 1, }; /* interrupt statistics */ -- cgit v0.10.2 From 6762f07fd55ff5e588aa5f0a1b70efe8e268a2e8 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 6 Nov 2009 14:52:56 -0800 Subject: iwlwifi: do not base station's sm_ps setting on AP Do not use AP's SM_PS setting for our own SM_PS setting. Reported-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index e0edc60..d09e748 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2316,12 +2316,6 @@ static void iwl_ht_conf(struct iwl_priv *priv, >> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT; maxstreams += 1; - ht_conf->sm_ps = - (u8)((ht_cap->cap & IEEE80211_HT_CAP_SM_PS) - >> 2); - IWL_DEBUG_MAC80211(priv, "sm_ps: 0x%x\n", - ht_conf->sm_ps); - if ((ht_cap->mcs.rx_mask[1] == 0) && (ht_cap->mcs.rx_mask[2] == 0)) ht_conf->single_chain_sufficient = true; -- cgit v0.10.2 From 84c4069232a671b3739387949d5cb588dacbd24a Mon Sep 17 00:00:00 2001 From: Ben Cahill Date: Fri, 6 Nov 2009 14:52:57 -0800 Subject: iwlwifi: Limit size of Event Log dump If device provides bad values for Event Log parameters (due to being asleep or SRAM corruption, etc.), the size can be very, very large (e.g. 0xa5a5a5a5), which can flood system log. Sanity-check capacity and next_entry values and limit to reasonable size dump. Signed-off-by: Ben Cahill Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index ad8a348..9c40742 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1702,6 +1702,9 @@ static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, } } +/* For sanity check only. Actual size is determined by uCode, typ. 512 */ +#define MAX_EVENT_LOG_SIZE (512) + void iwl_dump_nic_event_log(struct iwl_priv *priv) { u32 base; /* SRAM byte address of event log header */ @@ -1727,6 +1730,18 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv) num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); + if (capacity > MAX_EVENT_LOG_SIZE) { + IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n", + capacity, MAX_EVENT_LOG_SIZE); + capacity = MAX_EVENT_LOG_SIZE; + } + + if (next_entry > MAX_EVENT_LOG_SIZE) { + IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n", + next_entry, MAX_EVENT_LOG_SIZE); + next_entry = MAX_EVENT_LOG_SIZE; + } + size = num_wraps ? capacity : next_entry; /* bail out if nothing in log */ diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 23b31e6..a17afe0 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1603,6 +1603,9 @@ static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx, } } +/* For sanity check only. Actual size is determined by uCode, typ. 512 */ +#define IWL3945_MAX_EVENT_LOG_SIZE (512) + void iwl3945_dump_nic_event_log(struct iwl_priv *priv) { u32 base; /* SRAM byte address of event log header */ @@ -1624,6 +1627,18 @@ void iwl3945_dump_nic_event_log(struct iwl_priv *priv) num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); + if (capacity > IWL3945_MAX_EVENT_LOG_SIZE) { + IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n", + capacity, IWL3945_MAX_EVENT_LOG_SIZE); + capacity = IWL3945_MAX_EVENT_LOG_SIZE; + } + + if (next_entry > IWL3945_MAX_EVENT_LOG_SIZE) { + IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n", + next_entry, IWL3945_MAX_EVENT_LOG_SIZE); + next_entry = IWL3945_MAX_EVENT_LOG_SIZE; + } + size = num_wraps ? capacity : next_entry; /* bail out if nothing in log */ -- cgit v0.10.2 From e585447189123de627ecbfaccab9d7a3328a5dd8 Mon Sep 17 00:00:00 2001 From: Ben Cahill Date: Fri, 6 Nov 2009 14:52:58 -0800 Subject: iwlwifi: speed up event log dumps Take advantage of device's auto-increment for SRAM reads to eliminate extra write address accesses. Grab/release NIC access before/after entire read sequence, rather than for each read individually. After a quick check of dmesg logs, this seems to double Event Log dump speed, reducing from about 20 milliseconds to about 10 milliseconds for 512 entries using 3945. Signed-off-by: Ben Cahill Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 9c40742..2abd1f5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1666,6 +1666,7 @@ static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ u32 ptr; /* SRAM byte address of log data */ u32 ev, time, data; /* event log data */ + unsigned long reg_flags; if (num_events == 0) return; @@ -1681,25 +1682,34 @@ static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, ptr = base + EVENT_START_OFFSET + (start_idx * event_size); + /* Make sure device is powered up for SRAM reads */ + spin_lock_irqsave(&priv->reg_lock, reg_flags); + iwl_grab_nic_access(priv); + + /* Set starting address; reads will auto-increment */ + _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr); + rmb(); + /* "time" is actually "data" for mode 0 (no timestamp). * place event id # at far right for easier visual parsing. */ for (i = 0; i < num_events; i++) { - ev = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); - time = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); + ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); + time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); if (mode == 0) { /* data, ev */ trace_iwlwifi_dev_ucode_event(priv, 0, time, ev); IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev); } else { - data = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); + data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n", time, data, ev); trace_iwlwifi_dev_ucode_event(priv, time, data, ev); } } + + /* Allow device to power down */ + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->reg_lock, reg_flags); } /* For sanity check only. Actual size is determined by uCode, typ. 512 */ diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index a17afe0..92ecdd9 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1570,6 +1570,7 @@ static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx, u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ u32 ptr; /* SRAM byte address of log data */ u32 ev, time, data; /* event log data */ + unsigned long reg_flags; if (num_events == 0) return; @@ -1583,24 +1584,33 @@ static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx, ptr = base + EVENT_START_OFFSET + (start_idx * event_size); + /* Make sure device is powered up for SRAM reads */ + spin_lock_irqsave(&priv->reg_lock, reg_flags); + iwl_grab_nic_access(priv); + + /* Set starting address; reads will auto-increment */ + _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr); + rmb(); + /* "time" is actually "data" for mode 0 (no timestamp). * place event id # at far right for easier visual parsing. */ for (i = 0; i < num_events; i++) { - ev = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); - time = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); + ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); + time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); if (mode == 0) { /* data, ev */ IWL_ERR(priv, "0x%08x\t%04u\n", time, ev); trace_iwlwifi_dev_ucode_event(priv, 0, time, ev); } else { - data = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); + data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); IWL_ERR(priv, "%010u\t0x%08x\t%04u\n", time, data, ev); trace_iwlwifi_dev_ucode_event(priv, time, data, ev); } } + + /* Allow device to power down */ + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->reg_lock, reg_flags); } /* For sanity check only. Actual size is determined by uCode, typ. 512 */ -- cgit v0.10.2 From 2a3b793d6a0ff30ad4a541230a6dba2ecb6fff1b Mon Sep 17 00:00:00 2001 From: Ben Cahill Date: Fri, 6 Nov 2009 14:52:59 -0800 Subject: iwlwifi: Update comments for struct iwl_ssid_ie Signed-off-by: Ben Cahill Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index b62c90e..2857287 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -2566,9 +2566,10 @@ struct iwl_scan_channel { /** * struct iwl_ssid_ie - directed scan network information element * - * Up to 4 of these may appear in REPLY_SCAN_CMD, selected by "type" field - * in struct iwl_scan_channel; each channel may select different ssids from - * among the 4 entries. SSID IEs get transmitted in reverse order of entry. + * Up to 20 of these may appear in REPLY_SCAN_CMD (Note: Only 4 are in + * 3945 SCAN api), selected by "type" bit field in struct iwl_scan_channel; + * each channel may select different ssids from among the 20 (4) entries. + * SSID IEs get transmitted in reverse order of entry. */ struct iwl_ssid_ie { u8 id; -- cgit v0.10.2 From a7e6611034530fce62f5499f77dd4fb6cde4d130 Mon Sep 17 00:00:00 2001 From: Ben Cahill Date: Fri, 6 Nov 2009 14:53:00 -0800 Subject: iwlwifi: Add comments about MAC_ACCESS_REQ Signed-off-by: Ben Cahill Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h index 0a078b0..d0a358c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-io.h @@ -200,6 +200,26 @@ static inline int _iwl_grab_nic_access(struct iwl_priv *priv) /* this bit wakes up the NIC */ _iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + + /* + * These bits say the device is running, and should keep running for + * at least a short while (at least as long as MAC_ACCESS_REQ stays 1), + * but they do not indicate that embedded SRAM is restored yet; + * 3945 and 4965 have volatile SRAM, and must save/restore contents + * to/from host DRAM when sleeping/waking for power-saving. + * Each direction takes approximately 1/4 millisecond; with this + * overhead, it's a good idea to grab and hold MAC_ACCESS_REQUEST if a + * series of register accesses are expected (e.g. reading Event Log), + * to keep device from sleeping. + * + * CSR_UCODE_DRV_GP1 register bit MAC_SLEEP == 0 indicates that + * SRAM is okay/restored. We don't check that here because this call + * is just for hardware register access; but GP1 MAC_SLEEP check is a + * good idea before accessing 3945/4965 SRAM (e.g. reading Event Log). + * + * 5000 series and later (including 1000 series) have non-volatile SRAM, + * and do not save/restore SRAM when power cycling. + */ ret = _iwl_poll_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN, (CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY | -- cgit v0.10.2 From 8756990f99ecdfe64ed32cce878e36bddc16bdcc Mon Sep 17 00:00:00 2001 From: Ben Cahill Date: Fri, 6 Nov 2009 14:53:01 -0800 Subject: iwlagn: update write pointers in iwl_irq_tasklet() Follow-up to "update write pointers for all tx queues after wakeup"; that patch changed iwl_irq_tasklet_legacy(), but not iwl_irq_tasklet(), so newer devices were not covered. Comments from original patch: Wakeup interrupt has been updating write pointers (indexes, actually) only for tx queues 0-5. This is adequate just for 3945, but inadequate for other devices, all of which have more tx queues. Now updating all tx/command queues, so device can be aware of all new tx and host commands enqueued while device was asleep. This can potentially improve data traffic bandwidth and/or latency. Signed-off-by: Ben Cahill Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 2abd1f5..8198e14 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1084,6 +1084,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv) u32 inta = 0; u32 handled = 0; unsigned long flags; + u32 i; #ifdef CONFIG_IWLWIFI_DEBUG u32 inta_mask; #endif @@ -1194,12 +1195,8 @@ static void iwl_irq_tasklet(struct iwl_priv *priv) if (inta & CSR_INT_BIT_WAKEUP) { IWL_DEBUG_ISR(priv, "Wakeup interrupt\n"); iwl_rx_queue_update_write_ptr(priv, &priv->rxq); - iwl_txq_update_write_ptr(priv, &priv->txq[0]); - iwl_txq_update_write_ptr(priv, &priv->txq[1]); - iwl_txq_update_write_ptr(priv, &priv->txq[2]); - iwl_txq_update_write_ptr(priv, &priv->txq[3]); - iwl_txq_update_write_ptr(priv, &priv->txq[4]); - iwl_txq_update_write_ptr(priv, &priv->txq[5]); + for (i = 0; i < priv->hw_params.max_txq_num; i++) + iwl_txq_update_write_ptr(priv, &priv->txq[i]); priv->isr_stats.wakeup++; -- cgit v0.10.2 From f060face819401fb1f6456d362c5bc6672bba655 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 6 Nov 2009 14:53:02 -0800 Subject: iwlwifi: Fix issue on file transfer stalled in HT mode Turn on RTS/CTS for HT to prevent uCode TX fifo underrun This is fix for http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2103 Signed-off-by: Wey-Yi Guy Tested-by: Jiajia Zheng Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 1e387b9..8f82537 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -170,6 +170,7 @@ struct iwl_cfg iwl1000_bgn_cfg = { .shadow_ram_support = false, .ht_greenfield_support = true, .led_compensation = 51, + .use_rts_for_ht = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .support_ct_kill_exit = true, }; -- cgit v0.10.2 From 309e731a619bee28ace609b0c4c3a0029b7e5394 Mon Sep 17 00:00:00 2001 From: Ben Cahill Date: Fri, 6 Nov 2009 14:53:03 -0800 Subject: iwlwifi: MAC_ACCESS_REQ cleanup Add txq_id info to "Tx queue requesting wakeup" debug message Add "Rx queue requesting wakeup" debug message Move clear of CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ to be after nearby iwl_write_prph(), since iwl_write_prph() sets it and clears it. Almost removed it entirely, but just making sure in case someone removes the iwl_write_prph()! Also remove unneeded priv->lock usage; this is now handled by priv->reg_lock within iwl_clear_bit(). Join a couple of lines that had unneeded line returns. Signed-off-by: Ben Cahill Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 8198e14..da0b38e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1934,19 +1934,17 @@ static void __iwl_down(struct iwl_priv *priv) /* device going down, Stop using ICT table */ iwl_disable_ict(priv); - spin_lock_irqsave(&priv->lock, flags); - iwl_clear_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - spin_unlock_irqrestore(&priv->lock, flags); iwl_txq_ctx_stop(priv); iwl_rxq_stop(priv); - iwl_write_prph(priv, APMG_CLK_DIS_REG, - APMG_CLK_VAL_DMA_CLK_RQT); - + /* Power-down device's busmaster DMA clocks */ + iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); udelay(5); + /* Make sure (redundant) we've released our request to stay awake */ + iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + /* Stop the device, and put it in low power state */ priv->cfg->ops->lib->apm_ops.stop(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index d2dc7cc..61b3b0e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -140,6 +140,8 @@ int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q) reg = iwl_read32(priv, CSR_UCODE_DRV_GP1); if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { + IWL_DEBUG_INFO(priv, "Rx queue requesting wakeup, GP1 = 0x%x\n", + reg); iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); goto exit_unlock; diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 905ceca..9370e06 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -96,7 +96,8 @@ int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq) reg = iwl_read32(priv, CSR_UCODE_DRV_GP1); if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { - IWL_DEBUG_INFO(priv, "Requesting wakeup, GP1 = 0x%x\n", reg); + IWL_DEBUG_INFO(priv, "Tx queue %d requesting wakeup, GP1 = 0x%x\n", + txq_id, reg); iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); return ret; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 92ecdd9..05f1185 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -2600,9 +2600,8 @@ static void __iwl3945_down(struct iwl_priv *priv) iwl3945_hw_txq_ctx_stop(priv); iwl3945_hw_rxq_stop(priv); - iwl_write_prph(priv, APMG_CLK_DIS_REG, - APMG_CLK_VAL_DMA_CLK_RQT); - + /* Power-down device's busmaster DMA clocks */ + iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); udelay(5); /* Stop the device, and put it in low power state */ -- cgit v0.10.2 From 6a6a5c7af130e703c23d23ebe3cde23e079e554e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 6 Nov 2009 15:35:15 -0800 Subject: staging/wireless: don't build when NET etc. are not enabled These wireless drivers in staging could be built when CONFIG_NET=n, CONFIG_NETDEVICES=n, causing this build error: net/wireless/wext-priv.c: In function 'ioctl_private_call': net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler' due to faulty selects. Signed-off-by: Randy Dunlap Cc: Greg Kroah-Hartman Signed-off-by: John W. Linville diff --git a/drivers/staging/arlan/Kconfig b/drivers/staging/arlan/Kconfig index 0585ed8..5e42b81 100644 --- a/drivers/staging/arlan/Kconfig +++ b/drivers/staging/arlan/Kconfig @@ -1,6 +1,6 @@ config ARLAN tristate "Aironet Arlan 655 & IC2200 DS support" - depends on ISA && !64BIT + depends on ISA && !64BIT && WLAN select WIRELESS_EXT ---help--- Aironet makes Arlan, a class of wireless LAN adapters. These use the diff --git a/drivers/staging/netwave/Kconfig b/drivers/staging/netwave/Kconfig index c0c996c..8033e81 100644 --- a/drivers/staging/netwave/Kconfig +++ b/drivers/staging/netwave/Kconfig @@ -1,6 +1,6 @@ config PCMCIA_NETWAVE tristate "Xircom Netwave AirSurfer Pcmcia wireless support" - depends on PCMCIA + depends on PCMCIA && WLAN select WIRELESS_EXT select WEXT_PRIV help diff --git a/drivers/staging/wavelan/Kconfig b/drivers/staging/wavelan/Kconfig index 786060e..af65566 100644 --- a/drivers/staging/wavelan/Kconfig +++ b/drivers/staging/wavelan/Kconfig @@ -1,6 +1,6 @@ config WAVELAN tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support" - depends on ISA + depends on ISA && WLAN select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV @@ -25,7 +25,7 @@ config WAVELAN config PCMCIA_WAVELAN tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support" - depends on PCMCIA + depends on PCMCIA && WLAN select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV -- cgit v0.10.2 From c286181d5bfd8703219b954284143cfadff60b9b Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sat, 7 Nov 2009 18:54:22 +0100 Subject: b43-pio: Fix RX error path for rev>=8 devices This fixes the RX error path for rev>=8 devices. The wrong register size and definitions were used. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c index 3105f23..7d25502 100644 --- a/drivers/net/wireless/b43/pio.c +++ b/drivers/net/wireless/b43/pio.c @@ -761,7 +761,11 @@ data_ready: rx_error: if (err_msg) b43dbg(q->dev->wl, "PIO RX error: %s\n", err_msg); - b43_piorx_write16(q, B43_PIO_RXCTL, B43_PIO_RXCTL_DATARDY); + if (q->rev >= 8) + b43_piorx_write32(q, B43_PIO8_RXCTL, B43_PIO8_RXCTL_DATARDY); + else + b43_piorx_write16(q, B43_PIO_RXCTL, B43_PIO_RXCTL_DATARDY); + return 1; } -- cgit v0.10.2 From 202982dbf51ece7c2b49dc8b6066ff60cb02bcce Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 21:56:08 +0000 Subject: at76c50x-usb: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index e559dc9..0a917e4 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -121,6 +121,14 @@ static struct fwentry firmwares[] = { [BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" }, [BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" }, }; +MODULE_FIRMWARE("atmel_at76c503-i3861.bin"); +MODULE_FIRMWARE("atmel_at76c503-i3863.bin"); +MODULE_FIRMWARE("atmel_at76c503-rfmd.bin"); +MODULE_FIRMWARE("atmel_at76c503-rfmd-acc.bin"); +MODULE_FIRMWARE("atmel_at76c505-rfmd.bin"); +MODULE_FIRMWARE("atmel_at76c505-rfmd2958.bin"); +MODULE_FIRMWARE("atmel_at76c505a-rfmd2958.bin"); +MODULE_FIRMWARE("atmel_at76c505amx-rfmd.bin"); #define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops) -- cgit v0.10.2 From b98a032f6d9d4a5bc17490f67b13e5ca77c8410f Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 21:58:05 +0000 Subject: atmel: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index cce1888..3edbbcf 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -99,6 +99,22 @@ static struct { { ATMEL_FW_TYPE_506, "atmel_at76c506", "bin" }, { ATMEL_FW_TYPE_NONE, NULL, NULL } }; +MODULE_FIRMWARE("atmel_at76c502-wpa.bin"); +MODULE_FIRMWARE("atmel_at76c502.bin"); +MODULE_FIRMWARE("atmel_at76c502d-wpa.bin"); +MODULE_FIRMWARE("atmel_at76c502d.bin"); +MODULE_FIRMWARE("atmel_at76c502e-wpa.bin"); +MODULE_FIRMWARE("atmel_at76c502e.bin"); +MODULE_FIRMWARE("atmel_at76c502_3com-wpa.bin"); +MODULE_FIRMWARE("atmel_at76c502_3com.bin"); +MODULE_FIRMWARE("atmel_at76c504-wpa.bin"); +MODULE_FIRMWARE("atmel_at76c504.bin"); +MODULE_FIRMWARE("atmel_at76c504_2958-wpa.bin"); +MODULE_FIRMWARE("atmel_at76c504_2958.bin"); +MODULE_FIRMWARE("atmel_at76c504a_2958-wpa.bin"); +MODULE_FIRMWARE("atmel_at76c504a_2958.bin"); +MODULE_FIRMWARE("atmel_at76c506-wpa.bin"); +MODULE_FIRMWARE("atmel_at76c506.bin"); #define MAX_SSID_LENGTH 32 #define MGMT_JIFFIES (256 * HZ / 100) -- cgit v0.10.2 From a278ea3e423f7231934ba06a29592cddad8a6663 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 21:58:47 +0000 Subject: ipw2100: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Acked-by: Zhu Yi Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 240cff1..a9bc8a9 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -8462,6 +8462,12 @@ static int ipw2100_get_firmware(struct ipw2100_priv *priv, return 0; } +MODULE_FIRMWARE(IPW2100_FW_NAME("-i")); +#ifdef CONFIG_IPW2100_MONITOR +MODULE_FIRMWARE(IPW2100_FW_NAME("-p")); +#endif +MODULE_FIRMWARE(IPW2100_FW_NAME("")); + static void ipw2100_release_firmware(struct ipw2100_priv *priv, struct ipw2100_fw *fw) { -- cgit v0.10.2 From 873395a9fe15e5c42004e341b7d3632e6a273f73 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 21:59:10 +0000 Subject: ipw2200: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Acked-by: Zhu Yi Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 61ef890..39808e9 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -80,6 +80,11 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_VERSION(DRV_VERSION); MODULE_AUTHOR(DRV_COPYRIGHT); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("ipw2200-ibss.fw"); +#ifdef CONFIG_IPW2200_MONITOR +MODULE_FIRMWARE("ipw2200-sniffer.fw"); +#endif +MODULE_FIRMWARE("ipw2200-bss.fw"); static int cmdlog = 0; static int debug = 0; -- cgit v0.10.2 From 328aca32783cc98088151ce905977c8e899e5fc9 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 21:59:38 +0000 Subject: iwmc3200wifi: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c index cf86294..a7ec7ea 100644 --- a/drivers/net/wireless/iwmc3200wifi/sdio.c +++ b/drivers/net/wireless/iwmc3200wifi/sdio.c @@ -399,6 +399,9 @@ static struct iwm_if_ops if_sdio_ops = { .calib_lmac_name = "iwmc3200wifi-calib-sdio.bin", .lmac_name = "iwmc3200wifi-lmac-sdio.bin", }; +MODULE_FIRMWARE("iwmc3200wifi-umac-sdio.bin"); +MODULE_FIRMWARE("iwmc3200wifi-calib-sdio.bin"); +MODULE_FIRMWARE("iwmc3200wifi-lmac-sdio.bin"); static int iwm_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id) -- cgit v0.10.2 From a974a4bbcb1ceddc9c89defd7dab4da4b2b53d77 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 22:00:03 +0000 Subject: libertas: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 465742f..875516d 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -48,6 +48,7 @@ MODULE_AUTHOR("Holger Schurig "); MODULE_DESCRIPTION("Driver for Marvell 83xx compact flash WLAN cards"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("libertas_cs_helper.fw"); diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 9716728..09fcfad 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -99,6 +99,12 @@ static struct if_sdio_model if_sdio_models[] = { .firmware = "sd8688.bin", }, }; +MODULE_FIRMWARE("sd8385_helper.bin"); +MODULE_FIRMWARE("sd8385.bin"); +MODULE_FIRMWARE("sd8686_helper.bin"); +MODULE_FIRMWARE("sd8686.bin"); +MODULE_FIRMWARE("sd8688_helper.bin"); +MODULE_FIRMWARE("sd8688.bin"); struct if_sdio_packet { struct if_sdio_packet *next; diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index d6a48dd..bf4bfba 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -902,6 +902,10 @@ static int if_spi_calculate_fw_names(u16 card_id, chip_id_to_device_name[i].name); return 0; } +MODULE_FIRMWARE("libertas/gspi8385_hlp.bin"); +MODULE_FIRMWARE("libertas/gspi8385.bin"); +MODULE_FIRMWARE("libertas/gspi8686_hlp.bin"); +MODULE_FIRMWARE("libertas/gspi8686.bin"); static int __devinit if_spi_probe(struct spi_device *spi) { diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c index f12d667..65e1745 100644 --- a/drivers/net/wireless/libertas/if_usb.c +++ b/drivers/net/wireless/libertas/if_usb.c @@ -28,6 +28,8 @@ static char *lbs_fw_name = "usb8388.bin"; module_param_named(fw_name, lbs_fw_name, charp, 0644); +MODULE_FIRMWARE("usb8388.bin"); + static struct usb_device_id if_usb_table[] = { /* Enter the device signature inside */ { USB_DEVICE(0x1286, 0x2001) }, -- cgit v0.10.2 From 790e7560c09a0184afcc00ac0f8df95de7468acc Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 22:00:38 +0000 Subject: libertas_tf_usb: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c index 392337b..3691c30 100644 --- a/drivers/net/wireless/libertas_tf/if_usb.c +++ b/drivers/net/wireless/libertas_tf/if_usb.c @@ -23,6 +23,8 @@ static char *lbtf_fw_name = "lbtf_usb.bin"; module_param_named(fw_name, lbtf_fw_name, charp, 0644); +MODULE_FIRMWARE("lbtf_usb.bin"); + static struct usb_device_id if_usb_table[] = { /* Enter the device signature inside */ { USB_DEVICE(0x1286, 0x2001) }, -- cgit v0.10.2 From 7e75b942f67a13a9980c5e2b4fa1993b20426284 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 22:00:57 +0000 Subject: mwl8k: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 2ebfee4..9e64dd4 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -400,6 +400,9 @@ static int mwl8k_request_firmware(struct mwl8k_priv *priv) return 0; } +MODULE_FIRMWARE("mwl8k/helper_8687.fw"); +MODULE_FIRMWARE("mwl8k/fmimage_8687.fw"); + struct mwl8k_cmd_pkt { __le16 code; __le16 length; -- cgit v0.10.2 From 6f48d0e981c026572eac643ed43ebfb883048c14 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 22:01:29 +0000 Subject: orinoco: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/orinoco/fw.c b/drivers/net/wireless/orinoco/fw.c index 1257250..cfa7296 100644 --- a/drivers/net/wireless/orinoco/fw.c +++ b/drivers/net/wireless/orinoco/fw.c @@ -28,6 +28,12 @@ static const struct fw_info orinoco_fw[] = { { NULL, "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 }, { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", NULL, 0x00003100, 512 } }; +MODULE_FIRMWARE("agere_sta_fw.bin"); +MODULE_FIRMWARE("agere_ap_fw.bin"); +MODULE_FIRMWARE("prism_sta_fw.bin"); +MODULE_FIRMWARE("prism_ap_fw.bin"); +MODULE_FIRMWARE("symbol_sp24t_prim_fw"); +MODULE_FIRMWARE("symbol_sp24t_sec_fw"); /* Structure used to access fields in FW * Make sure LE decoding macros are used -- cgit v0.10.2 From a830e6599263aa535e298f5f834f3a119050757f Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 22:01:55 +0000 Subject: prism54: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index e26d7b3..3e6a71c 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -40,6 +40,9 @@ #define ISL3877_IMAGE_FILE "isl3877" #define ISL3886_IMAGE_FILE "isl3886" #define ISL3890_IMAGE_FILE "isl3890" +MODULE_FIRMWARE(ISL3877_IMAGE_FILE); +MODULE_FIRMWARE(ISL3886_IMAGE_FILE); +MODULE_FIRMWARE(ISL3890_IMAGE_FILE); static int prism54_bring_down(islpci_private *); static int islpci_alloc_memory(islpci_private *); -- cgit v0.10.2 From 49f146de405cfb37c51976b8a682330b8cb2972e Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 22:02:15 +0000 Subject: wl12xx: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c index da3bf1c..d03a07e 100644 --- a/drivers/net/wireless/wl12xx/wl1251_main.c +++ b/drivers/net/wireless/wl12xx/wl1251_main.c @@ -1431,3 +1431,4 @@ MODULE_DESCRIPTION("TI wl1251 Wireles LAN Driver Core"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Kalle Valo "); MODULE_ALIAS("spi:wl1251"); +MODULE_FIRMWARE(WL1251_FW_NAME); diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c index d2149fc..00ddcc2 100644 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ b/drivers/net/wireless/wl12xx/wl1271_main.c @@ -1979,3 +1979,4 @@ module_exit(wl1271_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Luciano Coelho "); MODULE_AUTHOR("Juuso Oikarinen "); +MODULE_FIRMWARE(WL1271_FW_NAME); -- cgit v0.10.2 From e01b0e0f90681072d29fe1ba6a29298683f42c15 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 22:02:39 +0000 Subject: zd1201: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c index bc81974..33c8be7 100644 --- a/drivers/net/wireless/zd1201.c +++ b/drivers/net/wireless/zd1201.c @@ -112,6 +112,9 @@ exit: return err; } +MODULE_FIRMWARE("zd1201-ap.fw"); +MODULE_FIRMWARE("zd1201.fw"); + static void zd1201_usbfree(struct urb *urb) { struct zd1201 *zd = urb->context; -- cgit v0.10.2 From 3e8b4d006ed04b1ddb7450faee7fa429e2a00e48 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 22:03:22 +0000 Subject: zd1211rw: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index d46f20a..ac19ecd 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -318,6 +318,13 @@ error: return r; } +MODULE_FIRMWARE(FW_ZD1211B_PREFIX "ur"); +MODULE_FIRMWARE(FW_ZD1211_PREFIX "ur"); +MODULE_FIRMWARE(FW_ZD1211B_PREFIX "ub"); +MODULE_FIRMWARE(FW_ZD1211_PREFIX "ub"); +MODULE_FIRMWARE(FW_ZD1211B_PREFIX "uphr"); +MODULE_FIRMWARE(FW_ZD1211_PREFIX "uphr"); + /* Read data from device address space using "firmware interface" which does * not require firmware to be loaded. */ int zd_usb_read_fw(struct zd_usb *usb, zd_addr_t addr, u8 *data, u16 len) -- cgit v0.10.2 From f9ef6028b2c1272a2f12299053efef90e8721f21 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 8 Nov 2009 09:23:07 +0100 Subject: drivers/net/wireless: correct check on CCS_START_NETWORK CCS_START_NETWORK is declared in drivers/net/wireless/rayctl.h with the comment Values for cmd. status is previously compared to CCS_COMMAND_COMPLETE, which is declared in the same file with the comment Values for buffer_status. Finally, it is possible at this point that cmd is CCS_START_NETWORK, because it is compared to that value in an enclosing switch that has CCS_START_NETWORK as one of two case labels around this code. Signed-off-by: Julia Lawall Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 88cd58e..595e441 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -2074,7 +2074,7 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id) del_timer(&local->timer); local->timer.expires = jiffies + HZ * 5; local->timer.data = (long)local; - if (status == CCS_START_NETWORK) { + if (cmd == CCS_START_NETWORK) { DEBUG(0, "ray_cs interrupt network \"%s\" start failed\n", local->sparm.b4.a_current_ess_id); -- cgit v0.10.2 From 2015d1920c6ec637b16db1e8734d9070983db21f Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Sun, 8 Nov 2009 12:30:14 +0100 Subject: rt2x00: Move interface type assignments to generic code. Make sure all drivers can benefit of the assignment of the interface type of an adapter, instead of keeping it for rt2800 only. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 3c5b875..bff8707 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1465,8 +1465,6 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; - rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI); - rt2x00dev->priv = (void *)&rt2800pci_rt2800_ops; /* diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index ce2e893..3168ad4 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1074,8 +1074,6 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; - rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_USB); - rt2x00dev->priv = (void *)&rt2800usb_rt2800_ops; /* diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index cdd5154..ece70d7 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -310,6 +310,8 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) rt2x00dev->irq = pci_dev->irq; rt2x00dev->name = pci_name(pci_dev); + rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI); + /* * Determine RT chipset by reading PCI header. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.c b/drivers/net/wireless/rt2x00/rt2x00soc.c index 539568c..4abcfa6 100644 --- a/drivers/net/wireless/rt2x00/rt2x00soc.c +++ b/drivers/net/wireless/rt2x00/rt2x00soc.c @@ -93,6 +93,11 @@ int rt2x00soc_probe(struct platform_device *pdev, rt2x00dev->irq = platform_get_irq(pdev, 0); rt2x00dev->name = pdev->dev.driver->name; + /* + * SoC devices mimic PCI behavior. + */ + rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI); + rt2x00_set_chip_rt(rt2x00dev, chipset); retval = rt2x00soc_alloc_reg(rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index c9cbdaa..aa6c31d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -653,6 +653,8 @@ int rt2x00usb_probe(struct usb_interface *usb_intf, rt2x00dev->ops = ops; rt2x00dev->hw = hw; + rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_USB); + retval = rt2x00usb_alloc_reg(rt2x00dev); if (retval) goto exit_free_device; -- cgit v0.10.2 From ac9d1a7bef71afa4837769ef38edb0f7e2ef8028 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 9 Nov 2009 23:38:35 +0100 Subject: rt2x00: Fix building of rt2800lib when rt2x00 driver is built-in. When enabling rt2800usb as a built-in driver (as opposed to a as a module) the build fails. See http://marc.info/?l=linux-wireless&m=125768687711034&w=2 for details. Fix it by properly including from rt2x00usb.h Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index 9943e42..1c9d6ca 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -26,6 +26,8 @@ #ifndef RT2X00USB_H #define RT2X00USB_H +#include + #define to_usb_device_intf(d) \ ({ \ struct usb_interface *intf = to_usb_interface(d); \ -- cgit v0.10.2 From 3491707a070c1183c709516b2f876f798c7a9a84 Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:39 +0000 Subject: mac80211: update meshconf IE This updates the Mesh Configuration IE according to the latest draft (3.03). Notable changes include the simplified protocol IDs. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 0aa8314..50c684d 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -115,7 +115,7 @@ #define IEEE80211_MAX_SSID_LEN 32 #define IEEE80211_MAX_MESH_ID_LEN 32 -#define IEEE80211_MESH_CONFIG_LEN 24 +#define IEEE80211_MESH_CONFIG_LEN 7 #define IEEE80211_QOS_CTL_LEN 2 #define IEEE80211_QOS_CTL_TID_MASK 0x000F diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 1ef7673..1f4f88a 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -361,15 +361,15 @@ struct ieee80211_if_mesh { u8 mesh_id[IEEE80211_MAX_MESH_ID_LEN]; size_t mesh_id_len; /* Active Path Selection Protocol Identifier */ - u8 mesh_pp_id[4]; + u8 mesh_pp_id; /* Active Path Selection Metric Identifier */ - u8 mesh_pm_id[4]; + u8 mesh_pm_id; /* Congestion Control Mode Identifier */ - u8 mesh_cc_id[4]; + u8 mesh_cc_id; /* Synchronization Protocol Identifier */ - u8 mesh_sp_id[4]; + u8 mesh_sp_id; /* Authentication Protocol Identifier */ - u8 mesh_auth_id[4]; + u8 mesh_auth_id; /* Local mesh Destination Sequence Number */ u32 dsn; /* Last used PREQ ID */ diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 9a73389..a49a337 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -15,14 +15,14 @@ #define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ) #define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ) -#define PP_OFFSET 1 /* Path Selection Protocol */ -#define PM_OFFSET 5 /* Path Selection Metric */ -#define CC_OFFSET 9 /* Congestion Control Mode */ -#define SP_OFFSET 13 /* Synchronization Protocol */ -#define AUTH_OFFSET 17 /* Authentication Protocol */ -#define CAPAB_OFFSET 22 -#define CAPAB_ACCEPT_PLINKS 0x80 -#define CAPAB_FORWARDING 0x10 +#define MESHCONF_PP_OFFSET 0 /* Path Selection Protocol */ +#define MESHCONF_PM_OFFSET 1 /* Path Selection Metric */ +#define MESHCONF_CC_OFFSET 2 /* Congestion Control Mode */ +#define MESHCONF_SP_OFFSET 3 /* Synchronization Protocol */ +#define MESHCONF_AUTH_OFFSET 4 /* Authentication Protocol */ +#define MESHCONF_CAPAB_OFFSET 6 +#define MESHCONF_CAPAB_ACCEPT_PLINKS 0x01 +#define MESHCONF_CAPAB_FORWARDING 0x08 #define TMR_RUNNING_HK 0 #define TMR_RUNNING_MP 1 @@ -85,11 +85,12 @@ bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_dat */ if (ifmsh->mesh_id_len == ie->mesh_id_len && memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 && - memcmp(ifmsh->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 && - memcmp(ifmsh->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 && - memcmp(ifmsh->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0 && - memcmp(ifmsh->mesh_sp_id, ie->mesh_config + SP_OFFSET, 4) == 0 && - memcmp(ifmsh->mesh_auth_id, ie->mesh_config + AUTH_OFFSET, 4) == 0) + (ifmsh->mesh_pp_id == *(ie->mesh_config + MESHCONF_PP_OFFSET))&& + (ifmsh->mesh_pm_id == *(ie->mesh_config + MESHCONF_PM_OFFSET))&& + (ifmsh->mesh_cc_id == *(ie->mesh_config + MESHCONF_CC_OFFSET))&& + (ifmsh->mesh_sp_id == *(ie->mesh_config + MESHCONF_SP_OFFSET))&& + (ifmsh->mesh_auth_id == *(ie->mesh_config + + MESHCONF_AUTH_OFFSET))) return true; return false; @@ -102,7 +103,8 @@ bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_dat */ bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie) { - return (*(ie->mesh_config + CAPAB_OFFSET) & CAPAB_ACCEPT_PLINKS) != 0; + return (*(ie->mesh_config + MESHCONF_CAPAB_OFFSET) & + MESHCONF_CAPAB_ACCEPT_PLINKS) != 0; } /** @@ -128,18 +130,11 @@ void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) void mesh_ids_set_default(struct ieee80211_if_mesh *sta) { - u8 oui[3] = {0x00, 0x0F, 0xAC}; - - memcpy(sta->mesh_pp_id, oui, sizeof(oui)); - memcpy(sta->mesh_pm_id, oui, sizeof(oui)); - memcpy(sta->mesh_cc_id, oui, sizeof(oui)); - memcpy(sta->mesh_sp_id, oui, sizeof(oui)); - memcpy(sta->mesh_auth_id, oui, sizeof(oui)); - sta->mesh_pp_id[sizeof(oui)] = 0; - sta->mesh_pm_id[sizeof(oui)] = 0; - sta->mesh_cc_id[sizeof(oui)] = 0xff; - sta->mesh_sp_id[sizeof(oui)] = 0xff; - sta->mesh_auth_id[sizeof(oui)] = 0x0; + sta->mesh_pp_id = 0; /* HWMP */ + sta->mesh_pm_id = 0; /* Airtime */ + sta->mesh_cc_id = 0; /* Disabled */ + sta->mesh_sp_id = 0; /* Neighbor Offset */ + sta->mesh_auth_id = 0; /* Disabled */ } int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) @@ -260,28 +255,21 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) pos = skb_put(skb, 2 + IEEE80211_MESH_CONFIG_LEN); *pos++ = WLAN_EID_MESH_CONFIG; *pos++ = IEEE80211_MESH_CONFIG_LEN; - /* Version */ - *pos++ = 1; /* Active path selection protocol ID */ - memcpy(pos, sdata->u.mesh.mesh_pp_id, 4); - pos += 4; + *pos++ = sdata->u.mesh.mesh_pp_id; /* Active path selection metric ID */ - memcpy(pos, sdata->u.mesh.mesh_pm_id, 4); - pos += 4; + *pos++ = sdata->u.mesh.mesh_pm_id; /* Congestion control mode identifier */ - memcpy(pos, sdata->u.mesh.mesh_cc_id, 4); - pos += 4; + *pos++ = sdata->u.mesh.mesh_cc_id; /* Synchronization protocol identifier */ - memcpy(pos, sdata->u.mesh.mesh_sp_id, 4); - pos += 4; + *pos++ = sdata->u.mesh.mesh_sp_id; /* Authentication Protocol identifier */ - memcpy(pos, sdata->u.mesh.mesh_auth_id, 4); - pos += 4; + *pos++ = sdata->u.mesh.mesh_auth_id; /* Mesh Formation Info */ memset(pos, 0x00, 1); @@ -289,8 +277,9 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) /* Mesh capability */ sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata); - *pos = CAPAB_FORWARDING; - *pos++ |= sdata->u.mesh.accepting_plinks ? CAPAB_ACCEPT_PLINKS : 0x00; + *pos = MESHCONF_CAPAB_FORWARDING; + *pos++ |= sdata->u.mesh.accepting_plinks ? + MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; *pos++ = 0x00; return; -- cgit v0.10.2 From a1935218da8964a033bdf68c591629741c94eeec Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:40 +0000 Subject: mac80211: set MESH_TTL to 31 Update the mesh time to live field to 31 according to draft 3.03. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index dd1c193..9948107 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -174,7 +174,7 @@ struct mesh_rmc { #define MESH_CFG_CMP_LEN (IEEE80211_MESH_CONFIG_LEN - 2) /* Default values, timeouts in ms */ -#define MESH_TTL 5 +#define MESH_TTL 31 #define MESH_MAX_RETR 3 #define MESH_RET_T 100 #define MESH_CONF_T 100 -- cgit v0.10.2 From 8f2fda9594f083981ad54c1994863875fe680925 Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:41 +0000 Subject: mac80211: implement the meshconf formation info field The Mesh Configuration Formation Info field contains the number of neighbors. This means that the beacon must be updated every time a peer joins or leaves. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index a49a337..7942518 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -223,6 +223,7 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) struct ieee80211_supported_band *sband; u8 *pos; int len, i, rate; + u8 neighbors; sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; len = sband->n_bitrates; @@ -271,9 +272,11 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) /* Authentication Protocol identifier */ *pos++ = sdata->u.mesh.mesh_auth_id; - /* Mesh Formation Info */ - memset(pos, 0x00, 1); - pos += 1; + /* Mesh Formation Info - number of neighbors */ + neighbors = atomic_read(&sdata->u.mesh.mshstats.estab_plinks); + /* Number of neighbor mesh STAs or 15 whichever is smaller */ + neighbors = (neighbors > 15) ? 15 : neighbors; + *pos++ = neighbors << 1; /* Mesh capability */ sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata); diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index ffcbad7..f98c8d2 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -65,6 +65,7 @@ void mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata) { atomic_inc(&sdata->u.mesh.mshstats.estab_plinks); mesh_accept_plinks_update(sdata); + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); } static inline @@ -72,6 +73,7 @@ void mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata) { atomic_dec(&sdata->u.mesh.mshstats.estab_plinks); mesh_accept_plinks_update(sdata); + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); } /** -- cgit v0.10.2 From 23c7a29cd020250646249592941261777cbeaf16 Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:42 +0000 Subject: mac80211: fix typo in a comment Signed-off-by: Javier Cardona Signed-off-by: Rui Paulo Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index f98c8d2..4188752 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -79,7 +79,7 @@ void mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata) /** * mesh_plink_fsm_restart - restart a mesh peer link finite state machine * - * @sta: mes peer link to restart + * @sta: mesh peer link to restart * * Locking: this function must be called holding sta->lock */ -- cgit v0.10.2 From 0938393f02c5a4db75a6e38ee31645c974169bb5 Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:43 +0000 Subject: mac80211: update peer link management IE and action frames Update the length and format of the peer link management action frames. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 7942518..63427d9 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -553,7 +553,7 @@ static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata, struct ieee80211_rx_status *rx_status) { switch (mgmt->u.action.category) { - case PLINK_CATEGORY: + case MESH_PLINK_CATEGORY: mesh_rx_plink_frame(sdata, mgmt, len, rx_status); break; case MESH_PATH_SEL_CATEGORY: diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 9948107..536d5c0 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -206,7 +206,7 @@ struct mesh_rmc { #define MESH_MAX_MPATHS 1024 /* Pending ANA approval */ -#define PLINK_CATEGORY 30 +#define MESH_PLINK_CATEGORY 30 #define MESH_PATH_SEL_CATEGORY 32 /* Public interfaces */ diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 4188752..8a54bc8 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -18,9 +18,8 @@ #define mpl_dbg(fmt, args...) do { (void)(0); } while (0) #endif -#define PLINK_GET_FRAME_SUBTYPE(p) (p) -#define PLINK_GET_LLID(p) (p + 1) -#define PLINK_GET_PLID(p) (p + 3) +#define PLINK_GET_LLID(p) (p + 4) +#define PLINK_GET_PLID(p) (p + 6) #define mod_plink_timer(s, t) (mod_timer(&s->plink_timer, \ jiffies + HZ * t / 1000)) @@ -154,6 +153,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400); struct ieee80211_mgmt *mgmt; bool include_plid = false; + static const u8 meshpeeringproto[] = { 0x00, 0x0F, 0xAC, 0x2A }; u8 *pos; int ie_len; @@ -171,7 +171,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, memcpy(mgmt->da, da, ETH_ALEN); memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN); /* BSSID is left zeroed, wildcard value */ - mgmt->u.action.category = PLINK_CATEGORY; + mgmt->u.action.category = MESH_PLINK_CATEGORY; mgmt->u.action.u.plink_action.action_code = action; if (action == PLINK_CLOSE) @@ -189,18 +189,18 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, /* Add Peer Link Management element */ switch (action) { case PLINK_OPEN: - ie_len = 3; + ie_len = 6; break; case PLINK_CONFIRM: - ie_len = 5; + ie_len = 8; include_plid = true; break; case PLINK_CLOSE: default: if (!plid) - ie_len = 5; + ie_len = 8; else { - ie_len = 7; + ie_len = 10; include_plid = true; } break; @@ -209,7 +209,8 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, pos = skb_put(skb, 2 + ie_len); *pos++ = WLAN_EID_PEER_LINK; *pos++ = ie_len; - *pos++ = action; + memcpy(pos, meshpeeringproto, sizeof(meshpeeringproto)); + pos += 4; memcpy(pos, &llid, 2); if (include_plid) { pos += 2; @@ -419,12 +420,13 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m return; } - ftype = *((u8 *)PLINK_GET_FRAME_SUBTYPE(elems.peer_link)); + ftype = mgmt->u.action.u.plink_action.action_code; ie_len = elems.peer_link_len; - if ((ftype == PLINK_OPEN && ie_len != 3) || - (ftype == PLINK_CONFIRM && ie_len != 5) || - (ftype == PLINK_CLOSE && ie_len != 5 && ie_len != 7)) { - mpl_dbg("Mesh plink: incorrect plink ie length\n"); + if ((ftype == PLINK_OPEN && ie_len != 6) || + (ftype == PLINK_CONFIRM && ie_len != 8) || + (ftype == PLINK_CLOSE && ie_len != 8 && ie_len != 10)) { + mpl_dbg("Mesh plink: incorrect plink ie length %d %d\n", + ftype, ie_len); return; } @@ -436,7 +438,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m * from the point of view of this host. */ memcpy(&plid, PLINK_GET_LLID(elems.peer_link), 2); - if (ftype == PLINK_CONFIRM || (ftype == PLINK_CLOSE && ie_len == 7)) + if (ftype == PLINK_CONFIRM || (ftype == PLINK_CLOSE && ie_len == 10)) memcpy(&llid, PLINK_GET_PLID(elems.peer_link), 2); rcu_read_lock(); diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 28316b2..4066570 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -507,7 +507,7 @@ ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx) if (ieee80211_is_action(hdr->frame_control)) { mgmt = (struct ieee80211_mgmt *)hdr; - if (mgmt->u.action.category != PLINK_CATEGORY) + if (mgmt->u.action.category != MESH_PLINK_CATEGORY) return RX_DROP_MONITOR; return RX_CONTINUE; } -- cgit v0.10.2 From 095de01325962e7574d5793193c6f3ae9a175aab Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:44 +0000 Subject: mac80211: update the format of path selection frames Update the format of path selection frames according to latest draft (3.03). Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 536d5c0..2fd3e20 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -208,6 +208,7 @@ struct mesh_rmc { /* Pending ANA approval */ #define MESH_PLINK_CATEGORY 30 #define MESH_PATH_SEL_CATEGORY 32 +#define MESH_PATH_SEL_ACTION 0 /* Public interfaces */ /* Various */ diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 29b82e9..c291cdb 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -105,7 +105,7 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN); /* BSSID is left zeroed, wildcard value */ mgmt->u.action.category = MESH_PATH_SEL_CATEGORY; - mgmt->u.action.u.mesh_action.action_code = action; + mgmt->u.action.u.mesh_action.action_code = MESH_PATH_SEL_ACTION; switch (action) { case MPATH_PREQ: -- cgit v0.10.2 From 27db2e423fdeae8815087677261ab72cca7b3c28 Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:45 +0000 Subject: mac80211: add MAC80211_VERBOSE_MHWMP_DEBUG Add MAC80211_VERBOSE_MHWMP_DEBUG, a debugging option for HWMP frame processing. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 4d5543a..a10d508 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -194,6 +194,19 @@ config MAC80211_VERBOSE_MPL_DEBUG Do not select this option. +config MAC80211_VERBOSE_MHWMP_DEBUG + bool "Verbose mesh HWMP routing debugging" + depends on MAC80211_DEBUG_MENU + depends on MAC80211_MESH + ---help--- + Selecting this option causes mac80211 to print out very + verbose mesh routing (HWMP) debugging messages (when mac80211 + is taking part in a mesh network). + It should not be selected on production systems as those + messages are remotely triggerable. + + Do not select this option. + config MAC80211_DEBUG_COUNTERS bool "Extra statistics for TX/RX debugging" depends on MAC80211_DEBUG_MENU diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index c291cdb..6dbaec5 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -9,6 +9,12 @@ #include "mesh.h" +#ifdef CONFIG_MAC80211_VERBOSE_MHWMP_DEBUG +#define mhwmp_dbg(fmt, args...) printk(KERN_DEBUG "Mesh HWMP: " fmt, ##args) +#else +#define mhwmp_dbg(fmt, args...) do { (void)(0); } while (0) +#endif + #define TEST_FRAME_LEN 8192 #define MAX_METRIC 0xffffffff #define ARITH_SHIFT 8 @@ -109,11 +115,13 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, switch (action) { case MPATH_PREQ: + mhwmp_dbg("sending PREQ\n"); ie_len = 37; pos = skb_put(skb, 2 + ie_len); *pos++ = WLAN_EID_PREQ; break; case MPATH_PREP: + mhwmp_dbg("sending PREP\n"); ie_len = 31; pos = skb_put(skb, 2 + ie_len); *pos++ = WLAN_EID_PREP; @@ -432,6 +440,8 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, orig_dsn = PREQ_IE_ORIG_DSN(preq_elem); dst_flags = PREQ_IE_DST_F(preq_elem); + mhwmp_dbg("received PREQ\n"); + if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) { forward = false; reply = true; @@ -467,13 +477,14 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, if (reply) { lifetime = PREQ_IE_LIFETIME(preq_elem); ttl = ifmsh->mshcfg.dot11MeshTTL; - if (ttl != 0) + if (ttl != 0) { + mhwmp_dbg("replying to the PREQ\n"); mesh_path_sel_frame_tx(MPATH_PREP, 0, dst_addr, cpu_to_le32(dst_dsn), 0, orig_addr, cpu_to_le32(orig_dsn), mgmt->sa, 0, ttl, cpu_to_le32(lifetime), cpu_to_le32(metric), 0, sdata); - else + } else ifmsh->mshstats.dropped_frames_ttl++; } @@ -661,7 +672,7 @@ static void mesh_queue_preq(struct mesh_path *mpath, u8 flags) preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_ATOMIC); if (!preq_node) { - printk(KERN_DEBUG "Mesh HWMP: could not allocate PREQ node\n"); + mhwmp_dbg("could not allocate PREQ node\n"); return; } @@ -670,7 +681,7 @@ static void mesh_queue_preq(struct mesh_path *mpath, u8 flags) spin_unlock(&ifmsh->mesh_preq_queue_lock); kfree(preq_node); if (printk_ratelimit()) - printk(KERN_DEBUG "Mesh HWMP: PREQ node queue full\n"); + mhwmp_dbg("PREQ node queue full\n"); return; } -- cgit v0.10.2 From dbb81c428bf534fcfe94102acca50f6d56504999 Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:46 +0000 Subject: mac80211: allow processing of more than one HWMP IE Since the HWMP IEs are now all optional and the action code is fixed, allow the HWMP code to find and process each IE on the path selection action frames. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 6dbaec5..e67e812 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -192,7 +192,7 @@ int mesh_path_error_tx(u8 *dst, __le32 dst_dsn, u8 *ra, memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN); /* BSSID is left zeroed, wildcard value */ mgmt->u.action.category = MESH_PATH_SEL_CATEGORY; - mgmt->u.action.u.mesh_action.action_code = MPATH_PERR; + mgmt->u.action.u.mesh_action.action_code = MESH_PATH_SEL_ACTION; ie_len = 12; pos = skb_put(skb, 2 + ie_len); *pos++ = WLAN_EID_PERR; @@ -277,7 +277,7 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, */ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, - u8 *hwmp_ie) + u8 *hwmp_ie, enum mpath_frame_type action) { struct ieee80211_local *local = sdata->local; struct mesh_path *mpath; @@ -288,7 +288,6 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, unsigned long orig_lifetime, exp_time; u32 last_hop_metric, new_metric; bool process = true; - u8 action = mgmt->u.action.u.mesh_action.action_code; rcu_read_lock(); sta = sta_info_get(local, mgmt->sa); @@ -443,6 +442,7 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, mhwmp_dbg("received PREQ\n"); if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) { + mhwmp_dbg("PREQ is for us\n"); forward = false; reply = true; metric = 0; @@ -498,6 +498,7 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, ifmsh->mshstats.dropped_frames_ttl++; return; } + mhwmp_dbg("forwarding the PREQ\n"); --ttl; flags = PREQ_IE_FLAGS(preq_elem); preq_id = PREQ_IE_PREQ_ID(preq_elem); @@ -524,6 +525,8 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata, u8 next_hop[ETH_ALEN]; u32 dst_dsn, orig_dsn, lifetime; + mhwmp_dbg("received PREP\n"); + /* Note that we divert from the draft nomenclature and denominate * destination to what the draft refers to as origininator. So in this * function destnation refers to the final destination of the PREP, @@ -625,32 +628,32 @@ void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems(mgmt->u.action.u.mesh_action.variable, len - baselen, &elems); - switch (mgmt->u.action.u.mesh_action.action_code) { - case MPATH_PREQ: - if (!elems.preq || elems.preq_len != 37) + mhwmp_dbg("RX path selection frame\n"); + if (elems.preq) { + if (elems.preq_len != 37) /* Right now we support just 1 destination and no AE */ return; - last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.preq); - if (!last_hop_metric) - return; - hwmp_preq_frame_process(sdata, mgmt, elems.preq, last_hop_metric); - break; - case MPATH_PREP: - if (!elems.prep || elems.prep_len != 31) + last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.preq, + MPATH_PREQ); + if (last_hop_metric) + hwmp_preq_frame_process(sdata, mgmt, elems.preq, + last_hop_metric); + } + if (elems.prep) { + if (elems.prep_len != 31) /* Right now we support no AE */ return; - last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.prep); - if (!last_hop_metric) - return; - hwmp_prep_frame_process(sdata, mgmt, elems.prep, last_hop_metric); - break; - case MPATH_PERR: - if (!elems.perr || elems.perr_len != 12) + last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.prep, + MPATH_PREP); + if (last_hop_metric) + hwmp_prep_frame_process(sdata, mgmt, elems.prep, + last_hop_metric); + } + if (elems.perr) { + if (elems.perr_len != 12) /* Right now we support only one destination per PERR */ return; hwmp_perr_frame_process(sdata, mgmt, elems.perr); - default: - return; } } -- cgit v0.10.2 From f3c0d88a7fc1c3fff84ac57d3f3195d0dd1854ac Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:47 +0000 Subject: mac80211: improve HWMP debugging Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index e67e812..db1a330 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -115,13 +115,13 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, switch (action) { case MPATH_PREQ: - mhwmp_dbg("sending PREQ\n"); + mhwmp_dbg("sending PREQ to %pM\n", dst); ie_len = 37; pos = skb_put(skb, 2 + ie_len); *pos++ = WLAN_EID_PREQ; break; case MPATH_PREP: - mhwmp_dbg("sending PREP\n"); + mhwmp_dbg("sending PREP to %pM\n", dst); ie_len = 31; pos = skb_put(skb, 2 + ie_len); *pos++ = WLAN_EID_PREP; @@ -439,7 +439,7 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, orig_dsn = PREQ_IE_ORIG_DSN(preq_elem); dst_flags = PREQ_IE_DST_F(preq_elem); - mhwmp_dbg("received PREQ\n"); + mhwmp_dbg("received PREQ from %pM\n", orig_addr); if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) { mhwmp_dbg("PREQ is for us\n"); @@ -498,7 +498,7 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, ifmsh->mshstats.dropped_frames_ttl++; return; } - mhwmp_dbg("forwarding the PREQ\n"); + mhwmp_dbg("forwarding the PREQ from %pM\n", orig_addr); --ttl; flags = PREQ_IE_FLAGS(preq_elem); preq_id = PREQ_IE_PREQ_ID(preq_elem); @@ -525,7 +525,7 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata, u8 next_hop[ETH_ALEN]; u32 dst_dsn, orig_dsn, lifetime; - mhwmp_dbg("received PREP\n"); + mhwmp_dbg("received PREP from %pM\n", PREP_IE_ORIG_ADDR(prep_elem)); /* Note that we divert from the draft nomenclature and denominate * destination to what the draft refers to as origininator. So in this @@ -628,7 +628,6 @@ void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems(mgmt->u.action.u.mesh_action.variable, len - baselen, &elems); - mhwmp_dbg("RX path selection frame\n"); if (elems.preq) { if (elems.preq_len != 37) /* Right now we support just 1 destination and no AE */ -- cgit v0.10.2 From 1460dd158a520447b87661aea4afda1997d69cde Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:48 +0000 Subject: mac80211: improve peer link management debugging Print the FSM state strings instead of just the numbers. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 8a54bc8..cf12f61 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -398,6 +398,17 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m u8 ie_len; u8 *baseaddr; __le16 plid, llid, reason; +#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG + static const char *mplstates[] = { + [PLINK_LISTEN] = "LISTEN", + [PLINK_OPN_SNT] = "OPN-SNT", + [PLINK_OPN_RCVD] = "OPN-RCVD", + [PLINK_CNF_RCVD] = "CNF_RCVD", + [PLINK_ESTAB] = "ESTAB", + [PLINK_HOLDING] = "HOLDING", + [PLINK_BLOCKED] = "BLOCKED" + }; +#endif /* need action_code, aux */ if (len < IEEE80211_MIN_ACTION_SIZE + 3) @@ -536,8 +547,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m } } - mpl_dbg("Mesh plink (peer, state, llid, plid, event): %pM %d %d %d %d\n", - mgmt->sa, sta->plink_state, + mpl_dbg("Mesh plink (peer, state, llid, plid, event): %pM %s %d %d %d\n", + mgmt->sa, mplstates[sta->plink_state], le16_to_cpu(sta->llid), le16_to_cpu(sta->plid), event); reason = 0; -- cgit v0.10.2 From 8b787643ca0a5130c647109d77fe512f89cfa611 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 10 Nov 2009 18:53:10 +0100 Subject: nl80211: add a parameter for using 4-address frames on virtual interfaces Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 50afca3..203adef 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -584,6 +584,8 @@ enum nl80211_commands { * changed then the list changed and the dump should be repeated * completely from scratch. * + * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -714,6 +716,8 @@ enum nl80211_attrs { NL80211_ATTR_PID, + NL80211_ATTR_4ADDR, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index ff67865..1ee41e4 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -206,10 +206,12 @@ struct ieee80211_supported_band { * struct vif_params - describes virtual interface parameters * @mesh_id: mesh ID to use * @mesh_id_len: length of the mesh ID + * @use_4addr: use 4-address frames */ struct vif_params { u8 *mesh_id; int mesh_id_len; + int use_4addr; }; /** diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 8ed62b6..8c8e4ea 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -138,6 +138,7 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = { [NL80211_ATTR_CIPHER_SUITE_GROUP] = { .type = NLA_U32 }, [NL80211_ATTR_WPA_VERSIONS] = { .type = NLA_U32 }, [NL80211_ATTR_PID] = { .type = NLA_U32 }, + [NL80211_ATTR_4ADDR] = { .type = NLA_U8 }, }; /* policy for the attributes */ @@ -987,6 +988,13 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info) change = true; } + if (info->attrs[NL80211_ATTR_4ADDR]) { + params.use_4addr = !!nla_get_u8(info->attrs[NL80211_ATTR_4ADDR]); + change = true; + } else { + params.use_4addr = -1; + } + if (info->attrs[NL80211_ATTR_MNTR_FLAGS]) { if (ntype != NL80211_IFTYPE_MONITOR) { err = -EINVAL; @@ -1053,6 +1061,9 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info) params.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]); } + if (info->attrs[NL80211_ATTR_4ADDR]) + params.use_4addr = !!nla_get_u8(info->attrs[NL80211_ATTR_4ADDR]); + err = parse_monitor_flags(type == NL80211_IFTYPE_MONITOR ? info->attrs[NL80211_ATTR_MNTR_FLAGS] : NULL, &flags); -- cgit v0.10.2 From f14543ee4d0681df1377b976cba704557ba220d3 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 10 Nov 2009 20:10:05 +0100 Subject: mac80211: implement support for 4-address frames for AP and client mode In some situations it might be useful to run a network with an Access Point and multiple clients, but with each client bridged to a network behind it. For this to work, both the client and the AP need to transmit 4-address frames, containing both source and destination MAC addresses. With this patch, you can configure a client to communicate using only 4-address frames for data traffic. On the AP side you can enable 4-address frames for individual clients by isolating them in separate AP VLANs which are configured in 4-address mode. Such an AP VLAN will be limited to one client only, and this client will be used as the destination for all traffic on its interface, regardless of the destination MAC address in the packet headers. The advantage of this mode compared to regular WDS mode is that it's easier to configure and does not require a static list of peer MAC addresses on any side. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 56319b5..576b86f 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -36,6 +36,24 @@ static bool nl80211_type_check(enum nl80211_iftype type) } } +static bool nl80211_params_check(enum nl80211_iftype type, + struct vif_params *params) +{ + if (!nl80211_type_check(type)) + return false; + + if (params->use_4addr > 0) { + switch(type) { + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_STATION: + break; + default: + return false; + } + } + return true; +} + static int ieee80211_add_iface(struct wiphy *wiphy, char *name, enum nl80211_iftype type, u32 *flags, struct vif_params *params) @@ -45,7 +63,7 @@ static int ieee80211_add_iface(struct wiphy *wiphy, char *name, struct ieee80211_sub_if_data *sdata; int err; - if (!nl80211_type_check(type)) + if (!nl80211_params_check(type, params)) return -EINVAL; err = ieee80211_if_add(local, name, &dev, type, params); @@ -75,7 +93,7 @@ static int ieee80211_change_iface(struct wiphy *wiphy, if (netif_running(dev)) return -EBUSY; - if (!nl80211_type_check(type)) + if (!nl80211_params_check(type, params)) return -EINVAL; sdata = IEEE80211_DEV_TO_SUB_IF(dev); @@ -89,6 +107,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy, params->mesh_id_len, params->mesh_id); + if (params->use_4addr >= 0) + sdata->use_4addr = !!params->use_4addr; + if (sdata->vif.type != NL80211_IFTYPE_MONITOR || !flags) return 0; @@ -806,6 +827,13 @@ static int ieee80211_change_station(struct wiphy *wiphy, return -EINVAL; } + if (vlansdata->use_4addr) { + if (vlansdata->u.vlan.sta) + return -EBUSY; + + rcu_assign_pointer(vlansdata->u.vlan.sta, sta); + } + sta->sdata = vlansdata; ieee80211_send_layer2_update(sta); } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 1f4f88a..19b0c12 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -208,6 +208,9 @@ struct ieee80211_if_wds { struct ieee80211_if_vlan { struct list_head list; + + /* used for all tx if the VLAN is configured to 4-addr mode */ + struct sta_info *sta; }; struct mesh_stats { @@ -457,6 +460,8 @@ struct ieee80211_sub_if_data { int force_unicast_rateidx; /* forced TX rateidx for unicast frames */ int max_ratectrl_rateidx; /* max TX rateidx for rate control */ + bool use_4addr; /* use 4-address frames */ + union { struct ieee80211_if_ap ap; struct ieee80211_if_wds wds; diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 8495161..1f02b06 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -752,6 +752,7 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata, ieee80211_mandatory_rates(sdata->local, sdata->local->hw.conf.channel->band); sdata->drop_unencrypted = 0; + sdata->use_4addr = 0; return 0; } @@ -819,6 +820,9 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, params->mesh_id_len, params->mesh_id); + if (params && params->use_4addr >= 0) + sdata->use_4addr = !!params->use_4addr; + mutex_lock(&local->iflist_mtx); list_add_tail_rcu(&sdata->list, &local->interfaces); mutex_unlock(&local->iflist_mtx); diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 4066570..7647836 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1181,6 +1181,13 @@ __ieee80211_data_to_8023(struct ieee80211_rx_data *rx) { struct net_device *dev = rx->dev; struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; + + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN && !sdata->use_4addr && + ieee80211_has_a4(hdr->frame_control)) + return -1; + if (sdata->use_4addr && is_multicast_ether_addr(hdr->addr1)) + return -1; return ieee80211_data_to_8023(rx->skb, dev->dev_addr, sdata->vif.type); } @@ -1534,6 +1541,7 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx) { struct net_device *dev = rx->dev; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); __le16 fc = hdr->frame_control; int err; @@ -1543,6 +1551,14 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx) if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) return RX_DROP_MONITOR; + /* + * Allow the cooked monitor interface of an AP to see 4-addr frames so + * that a 4-addr station can be detected and moved into a separate VLAN + */ + if (ieee80211_has_a4(hdr->frame_control) && + sdata->vif.type == NL80211_IFTYPE_AP) + return RX_DROP_MONITOR; + err = __ieee80211_data_to_8023(rx); if (unlikely(err)) return RX_DROP_UNUSABLE; @@ -1983,7 +1999,7 @@ static int prepare_for_handlers(struct ieee80211_sub_if_data *sdata, switch (sdata->vif.type) { case NL80211_IFTYPE_STATION: - if (!bssid) + if (!bssid && !sdata->use_4addr) return 0; if (!multicast && compare_ether_addr(sdata->dev->dev_addr, hdr->addr1) != 0) { diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index be59456e..396a948 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -509,6 +509,9 @@ static void __sta_info_unlink(struct sta_info **sta) local->num_sta--; local->sta_generation++; + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + rcu_assign_pointer(sdata->u.vlan.sta, NULL); + if (local->ops->sta_notify) { if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) sdata = container_of(sdata->bss, diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index bfaa43e..2f3345c 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1051,7 +1051,10 @@ ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata, hdr = (struct ieee80211_hdr *) skb->data; - tx->sta = sta_info_get(local, hdr->addr1); + if ((sdata->vif.type == NL80211_IFTYPE_AP_VLAN) && sdata->use_4addr) + tx->sta = rcu_dereference(sdata->u.vlan.sta); + if (!tx->sta) + tx->sta = sta_info_get(local, hdr->addr1); if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) && (local->hw.flags & IEEE80211_HW_AMPDU_AGGREGATION)) { @@ -1613,7 +1616,7 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, const u8 *encaps_data; int encaps_len, skip_header_bytes; int nh_pos, h_pos; - struct sta_info *sta; + struct sta_info *sta = NULL; u32 sta_flags = 0; if (unlikely(skb->len < ETH_HLEN)) { @@ -1630,8 +1633,25 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA); switch (sdata->vif.type) { - case NL80211_IFTYPE_AP: case NL80211_IFTYPE_AP_VLAN: + rcu_read_lock(); + if (sdata->use_4addr) + sta = rcu_dereference(sdata->u.vlan.sta); + if (sta) { + fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); + /* RA TA DA SA */ + memcpy(hdr.addr1, sta->sta.addr, ETH_ALEN); + memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); + memcpy(hdr.addr3, skb->data, ETH_ALEN); + memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); + hdrlen = 30; + sta_flags = get_sta_flags(sta); + } + rcu_read_unlock(); + if (sta) + break; + /* fall through */ + case NL80211_IFTYPE_AP: fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); /* DA BSSID SA */ memcpy(hdr.addr1, skb->data, ETH_ALEN); @@ -1705,12 +1725,21 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, break; #endif case NL80211_IFTYPE_STATION: - fc |= cpu_to_le16(IEEE80211_FCTL_TODS); - /* BSSID SA DA */ memcpy(hdr.addr1, sdata->u.mgd.bssid, ETH_ALEN); - memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); - memcpy(hdr.addr3, skb->data, ETH_ALEN); - hdrlen = 24; + if (sdata->use_4addr && ethertype != ETH_P_PAE) { + fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); + /* RA TA DA SA */ + memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); + memcpy(hdr.addr3, skb->data, ETH_ALEN); + memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); + hdrlen = 30; + } else { + fc |= cpu_to_le16(IEEE80211_FCTL_TODS); + /* BSSID SA DA */ + memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); + memcpy(hdr.addr3, skb->data, ETH_ALEN); + hdrlen = 24; + } break; case NL80211_IFTYPE_ADHOC: /* DA SA BSSID */ diff --git a/net/wireless/util.c b/net/wireless/util.c index 3fc2df8..5aa39f7 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -320,7 +320,9 @@ int ieee80211_data_to_8023(struct sk_buff *skb, u8 *addr, break; case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS): if (unlikely(iftype != NL80211_IFTYPE_WDS && - iftype != NL80211_IFTYPE_MESH_POINT)) + iftype != NL80211_IFTYPE_MESH_POINT && + iftype != NL80211_IFTYPE_AP_VLAN && + iftype != NL80211_IFTYPE_STATION)) return -1; if (iftype == NL80211_IFTYPE_MESH_POINT) { struct ieee80211s_hdr *meshdr = -- cgit v0.10.2 From 194b7c13b4c516db94db8ee004342f8935922739 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 29 Oct 2009 10:41:15 -0700 Subject: ath9k: fix listening to idle requests The way idle configuration detection was implemented as busted due to the fact that it assumed the ath9k virtual wiphy, the aphy, would be marked as inactive if it was not used but it turns out an aphy is always active if its the only wiphy present. We need to distinguish between aphy activity and idleness so we now add an idle bool for the aphy and mark it as such based on the passed IEEE80211_CONF_CHANGE_IDLE from mac80211. Previous to all_wiphys_idle would never be true when using only one device so we never really were using IEEE80211_CONF_CHANGE_IDLE -- we never turned the radio off or on upon IEEE80211_CONF_CHANGE_IDLE changes as radio changes depended on all_wiphys_idle being true either to turn the radio on or off. Since it was always false for one device this code was doing nothing. Cc: Jouni.Malinen Reported-by: Vasanthakumar Thiagarajan Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 13dd020..da53578 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -620,6 +620,7 @@ struct ath_wiphy { ATH_WIPHY_PAUSED, ATH_WIPHY_SCAN, } state; + bool idle; int chan_idx; int chan_is_ht; }; @@ -691,6 +692,7 @@ void ath9k_wiphy_pause_all_forced(struct ath_softc *sc, bool ath9k_wiphy_scanning(struct ath_softc *sc); void ath9k_wiphy_work(struct work_struct *work); bool ath9k_all_wiphys_idle(struct ath_softc *sc); +void ath9k_set_wiphy_idle(struct ath_wiphy *aphy, bool idle); int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype); #endif /* ATH9K_H */ diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 9fefc51..bdce0ab 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2688,22 +2688,37 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ieee80211_conf *conf = &hw->conf; struct ath_hw *ah = sc->sc_ah; - bool all_wiphys_idle = false, disable_radio = false; + bool disable_radio; mutex_lock(&sc->mutex); - /* Leave this as the first check */ + /* + * Leave this as the first check because we need to turn on the + * radio if it was disabled before prior to processing the rest + * of the changes. Likewise we must only disable the radio towards + * the end. + */ if (changed & IEEE80211_CONF_CHANGE_IDLE) { + bool enable_radio; + bool all_wiphys_idle; + bool idle = !!(conf->flags & IEEE80211_CONF_IDLE); spin_lock_bh(&sc->wiphy_lock); all_wiphys_idle = ath9k_all_wiphys_idle(sc); + ath9k_set_wiphy_idle(aphy, idle); + + if (!idle && all_wiphys_idle) + enable_radio = true; + + /* + * After we unlock here its possible another wiphy + * can be re-renabled so to account for that we will + * only disable the radio toward the end of this routine + * if by then all wiphys are still idle. + */ spin_unlock_bh(&sc->wiphy_lock); - if (conf->flags & IEEE80211_CONF_IDLE){ - if (all_wiphys_idle) - disable_radio = true; - } - else if (all_wiphys_idle) { + if (enable_radio) { ath_radio_enable(sc); ath_print(common, ATH_DBG_CONFIG, "not-idle: enabling radio\n"); @@ -2779,6 +2794,10 @@ skip_chan_change: if (changed & IEEE80211_CONF_CHANGE_POWER) sc->config.txpowlimit = 2 * conf->power_level; + spin_lock_bh(&sc->wiphy_lock); + disable_radio = ath9k_all_wiphys_idle(sc); + spin_unlock_bh(&sc->wiphy_lock); + if (disable_radio) { ath_print(common, ATH_DBG_CONFIG, "idle: disabling radio\n"); ath_radio_disable(sc); diff --git a/drivers/net/wireless/ath/ath9k/virtual.c b/drivers/net/wireless/ath/ath9k/virtual.c index bc7d173..e6a50f3 100644 --- a/drivers/net/wireless/ath/ath9k/virtual.c +++ b/drivers/net/wireless/ath/ath9k/virtual.c @@ -668,15 +668,26 @@ void ath9k_wiphy_set_scheduler(struct ath_softc *sc, unsigned int msec_int) bool ath9k_all_wiphys_idle(struct ath_softc *sc) { unsigned int i; - if (sc->pri_wiphy->state != ATH_WIPHY_INACTIVE) { + if (!sc->pri_wiphy->idle) return false; - } for (i = 0; i < sc->num_sec_wiphy; i++) { struct ath_wiphy *aphy = sc->sec_wiphy[i]; if (!aphy) continue; - if (aphy->state != ATH_WIPHY_INACTIVE) + if (!aphy->idle) return false; } return true; } + +/* caller must hold wiphy_lock */ +void ath9k_set_wiphy_idle(struct ath_wiphy *aphy, bool idle) +{ + struct ath_softc *sc = aphy->sc; + + aphy->idle = idle; + ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG, + "Marking %s as %s\n", + wiphy_name(aphy->hw->wiphy), + idle ? "idle" : "not-idle"); +} -- cgit v0.10.2 From 1bdf6c3bece59c96aec3b8b457a9a554f6b2c433 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 28 Oct 2009 13:39:40 -0700 Subject: ath9k: update hw configuration for virtual wiphys ath9k supports its own virtual wiphys. The hardware code relies on the ieee80211_hw for the present interface but with recent changes introduced the common->hw was never updated and is required for virtual wiphys. Cc: Jouni.Malinen Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/virtual.c b/drivers/net/wireless/ath/ath9k/virtual.c index e6a50f3..7678c4a 100644 --- a/drivers/net/wireless/ath/ath9k/virtual.c +++ b/drivers/net/wireless/ath/ath9k/virtual.c @@ -298,6 +298,7 @@ static void ath9k_wiphy_unpause_channel(struct ath_softc *sc) void ath9k_wiphy_chan_work(struct work_struct *work) { struct ath_softc *sc = container_of(work, struct ath_softc, chan_work); + struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ath_wiphy *aphy = sc->next_wiphy; if (aphy == NULL) @@ -313,6 +314,10 @@ void ath9k_wiphy_chan_work(struct work_struct *work) /* XXX: remove me eventually */ ath9k_update_ichannel(sc, aphy->hw, &sc->sc_ah->channels[sc->chan_idx]); + + /* sync hw configuration for hw code */ + common->hw = aphy->hw; + ath_update_chainmask(sc, sc->chan_is_ht); if (ath_set_channel(sc, aphy->hw, &sc->sc_ah->channels[sc->chan_idx]) < 0) { -- cgit v0.10.2 From b4afffc0cfa3f35ee011d5ed4153e49f5cc3bc96 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 2 Nov 2009 11:36:08 -0800 Subject: ath9k: simpify RX by calling ath_get_virt_hw() once ath_get_virt_hw() is required on RX to determine for which virtual wiphy an skb came in for. Instead of searching for the hw twice do it only once. Cc: Jouni.Malinen Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 355dd18..c910c10 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -105,23 +105,21 @@ static u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp) * up the frame up to let mac80211 handle the actual error case, be it no * decryption key or real decryption error. This let us keep statistics there. */ -static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds, +static int ath_rx_prepare(struct ieee80211_hw *hw, + struct sk_buff *skb, struct ath_desc *ds, struct ieee80211_rx_status *rx_status, bool *decrypt_error, struct ath_softc *sc) { struct ieee80211_hdr *hdr; u8 ratecode; __le16 fc; - struct ieee80211_hw *hw; struct ieee80211_sta *sta; struct ath_node *an; int last_rssi = ATH_RSSI_DUMMY_MARKER; - hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); - hw = ath_get_virt_hw(sc, hdr); if (ds->ds_rxstat.rs_more) { /* @@ -616,7 +614,8 @@ static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb) } } -static void ath_rx_send_to_mac80211(struct ath_softc *sc, struct sk_buff *skb, +static void ath_rx_send_to_mac80211(struct ieee80211_hw *hw, + struct ath_softc *sc, struct sk_buff *skb, struct ieee80211_rx_status *rx_status) { struct ieee80211_hdr *hdr; @@ -648,7 +647,7 @@ static void ath_rx_send_to_mac80211(struct ath_softc *sc, struct sk_buff *skb, } else { /* Deliver unicast frames based on receiver address */ memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status)); - ieee80211_rx(ath_get_virt_hw(sc, hdr), skb); + ieee80211_rx(hw, skb); } } @@ -664,6 +663,12 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) struct ieee80211_rx_status rx_status; struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); + /* + * The hw can techncically differ from common->hw when using ath9k + * virtual wiphy so to account for that we iterate over the active + * wiphys and find the appropriate wiphy and therefore hw. + */ + struct ieee80211_hw *hw = NULL; struct ieee80211_hdr *hdr; int hdrlen, padsize, retval; bool decrypt_error = false; @@ -743,6 +748,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) sc->rx.bufsize, DMA_FROM_DEVICE); + hdr = (struct ieee80211_hdr *) skb->data; + hw = ath_get_virt_hw(sc, hdr); + /* * If we're asked to flush receive queue, directly * chain it back at the queue without processing it. @@ -757,7 +765,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) if (sc->rx.bufsize < ds->ds_rxstat.rs_datalen) goto requeue; - if (!ath_rx_prepare(skb, ds, &rx_status, &decrypt_error, sc)) + if (!ath_rx_prepare(hw, skb, ds, + &rx_status, &decrypt_error, sc)) goto requeue; /* Ensure we always have an skb to requeue once we are done @@ -779,7 +788,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) skb_put(skb, ds->ds_rxstat.rs_datalen); /* see if any padding is done by the hw and remove it */ - hdr = (struct ieee80211_hdr *)skb->data; hdrlen = ieee80211_get_hdrlen_from_skb(skb); fc = hdr->frame_control; @@ -826,7 +834,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) bf->bf_mpdu = NULL; ath_print(common, ATH_DBG_FATAL, "dma_mapping_error() on RX\n"); - ath_rx_send_to_mac80211(sc, skb, &rx_status); + ath_rx_send_to_mac80211(hw, sc, skb, &rx_status); break; } bf->bf_dmacontext = bf->bf_buf_addr; @@ -847,7 +855,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) SC_OP_WAIT_FOR_PSPOLL_DATA))) ath_rx_ps(sc, skb); - ath_rx_send_to_mac80211(sc, skb, &rx_status); + ath_rx_send_to_mac80211(hw, sc, skb, &rx_status); requeue: list_move_tail(&bf->list, &sc->rx.rxbuf); -- cgit v0.10.2 From cee71d6c1471953239ea4c13306888cf2b36426e Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 2 Nov 2009 14:17:51 -0800 Subject: ath9k: use the passed ieee80211_hw on ath_rx_prepare() this now uses the proper hw which should mean finding the right sta when using ath9k virtual wiphy stuff. Only advantage I see here is getting the rssi properly updated so the 'fix' itself isn't that great, but at least this is correct. Cc: Jouni.Malinen Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index c910c10..c6904f0 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -201,7 +201,7 @@ static int ath_rx_prepare(struct ieee80211_hw *hw, rcu_read_lock(); /* XXX: use ieee80211_find_sta! */ - sta = ieee80211_find_sta_by_hw(sc->hw, hdr->addr2); + sta = ieee80211_find_sta_by_hw(hw, hdr->addr2); if (sta) { an = (struct ath_node *) sta->drv_priv; if (ds->ds_rxstat.rs_rssi != ATH9K_RSSI_BAD && -- cgit v0.10.2 From 68a89116157d9d479a854db6d79a9116be79cd99 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 2 Nov 2009 14:35:42 -0800 Subject: ath9k: pass the ieee80211_hw on radio enable/disable We use the ieee80211_hw for radio enable/disable but the wrong structure hw was being used in consideration for virtual wiphys as each virtual wiphy has its own ieee80211_hw struct. Just pass the hw struct to ensure we use the right one. This should fix the hw used and passed for radio enable/disable. This includes the stoping / starting of the software TX queues so mac80211 doesn't send us data for a specific virtual wiphy. ath9k already takes care of pausing virtual wiphys and stopping the respective queues on its own, but this should handle the idle mac80211 conf calls as well. Cc: Jouni.Malinen Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index da53578..59ce7ec 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -655,8 +655,9 @@ void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw, void ath_update_chainmask(struct ath_softc *sc, int is_ht); int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, struct ath9k_channel *hchan); -void ath_radio_enable(struct ath_softc *sc); -void ath_radio_disable(struct ath_softc *sc); + +void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw); +void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw); #ifdef CONFIG_PCI int ath_pci_init(void); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index bdce0ab..11aaa7d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1200,11 +1200,11 @@ fail: ath_deinit_leds(sc); } -void ath_radio_enable(struct ath_softc *sc) +void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw) { struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); - struct ieee80211_channel *channel = sc->hw->conf.channel; + struct ieee80211_channel *channel = hw->conf.channel; int r; ath9k_ps_wakeup(sc); @@ -1241,18 +1241,18 @@ void ath_radio_enable(struct ath_softc *sc) AR_GPIO_OUTPUT_MUX_AS_OUTPUT); ath9k_hw_set_gpio(ah, ah->led_pin, 0); - ieee80211_wake_queues(sc->hw); + ieee80211_wake_queues(hw); ath9k_ps_restore(sc); } -void ath_radio_disable(struct ath_softc *sc) +void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw) { struct ath_hw *ah = sc->sc_ah; - struct ieee80211_channel *channel = sc->hw->conf.channel; + struct ieee80211_channel *channel = hw->conf.channel; int r; ath9k_ps_wakeup(sc); - ieee80211_stop_queues(sc->hw); + ieee80211_stop_queues(hw); /* Disable LED */ ath9k_hw_set_gpio(ah, ah->led_pin, 1); @@ -1266,7 +1266,7 @@ void ath_radio_disable(struct ath_softc *sc) ath_flushrecv(sc); /* flush recv queue */ if (!ah->curchan) - ah->curchan = ath_get_curchannel(sc, sc->hw); + ah->curchan = ath_get_curchannel(sc, hw); spin_lock_bh(&sc->sc_resetlock); r = ath9k_hw_reset(ah, ah->curchan, false); @@ -2719,7 +2719,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) spin_unlock_bh(&sc->wiphy_lock); if (enable_radio) { - ath_radio_enable(sc); + ath_radio_enable(sc, hw); ath_print(common, ATH_DBG_CONFIG, "not-idle: enabling radio\n"); } @@ -2800,7 +2800,7 @@ skip_chan_change: if (disable_radio) { ath_print(common, ATH_DBG_CONFIG, "idle: disabling radio\n"); - ath_radio_disable(sc); + ath_radio_disable(sc, hw); } mutex_unlock(&sc->mutex); diff --git a/drivers/net/wireless/ath/ath9k/virtual.c b/drivers/net/wireless/ath/ath9k/virtual.c index 7678c4a..69a871b 100644 --- a/drivers/net/wireless/ath/ath9k/virtual.c +++ b/drivers/net/wireless/ath/ath9k/virtual.c @@ -526,8 +526,9 @@ int ath9k_wiphy_select(struct ath_wiphy *aphy) * frame being completed) */ spin_unlock_bh(&sc->wiphy_lock); - ath_radio_disable(sc); - ath_radio_enable(sc); + ath_radio_disable(sc, aphy->hw); + ath_radio_enable(sc, aphy->hw); + /* Only the primary wiphy hw is used for queuing work */ ieee80211_queue_work(aphy->sc->hw, &aphy->sc->chan_work); return -EBUSY; /* previous select still in progress */ -- cgit v0.10.2 From 76d5a9e83b6e72ebe651c08e6dc247a58469ddda Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 2 Nov 2009 16:08:34 -0800 Subject: ath9k: use correct hw for tx aggregation TX completion When ath9k virtual wiphys are used the sc->hw will not always represent the active hw, instead we need to get it from the skb->cb private driver area. This ensures the right hw is used to find a sta for the TX'd skb. Cc: Jouni.Malinen Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 8e052f4..6d7f0bc 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -267,7 +267,10 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, struct ath_node *an = NULL; struct sk_buff *skb; struct ieee80211_sta *sta; + struct ieee80211_hw *hw; struct ieee80211_hdr *hdr; + struct ieee80211_tx_info *tx_info; + struct ath_tx_info_priv *tx_info_priv; struct ath_atx_tid *tid = NULL; struct ath_buf *bf_next, *bf_last = bf->bf_lastbf; struct ath_desc *ds = bf_last->bf_desc; @@ -280,10 +283,14 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, skb = bf->bf_mpdu; hdr = (struct ieee80211_hdr *)skb->data; + tx_info = IEEE80211_SKB_CB(skb); + tx_info_priv = (struct ath_tx_info_priv *) tx_info->rate_driver_data[0]; + hw = tx_info_priv->aphy->hw; + rcu_read_lock(); /* XXX: use ieee80211_find_sta! */ - sta = ieee80211_find_sta_by_hw(sc->hw, hdr->addr1); + sta = ieee80211_find_sta_by_hw(hw, hdr->addr1); if (!sta) { rcu_read_unlock(); return; -- cgit v0.10.2 From 5008f3727b05b5eb970ce703721aa5897a088e30 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 2 Nov 2009 16:27:33 -0800 Subject: ath9k: use the right hw on ath_tx_setup_buffer() for HT When using virtual wiphys the base sc->hw was being used, the correct hw is passed along the caller already so just use that. Cc: Jouni.Malinen Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 6d7f0bc..fc06768 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1576,7 +1576,7 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf, bf->bf_frmlen = skb->len + FCS_LEN - (hdrlen & 3); - if (conf_is_ht(&sc->hw->conf) && !is_pae(skb)) + if (conf_is_ht(&hw->conf) && !is_pae(skb)) bf->bf_state.bf_type |= BUF_HT; bf->bf_flags = setup_tx_flags(sc, skb, txctl->txq); -- cgit v0.10.2 From f52de03bf9843673cadff8016a609e1628c139e2 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 2 Nov 2009 17:09:12 -0800 Subject: ath9k: handle low buffer space for virtual wiphys ath9k virtual wiphys all share the same internal buffer space for TX but they do not share the mac80211 skb queues. When ath9k detects it is running low on buffer space to TX it tells mac80211 to stop sending it skbs its way but it always does this only for the primary wiphy. This means mac80211 won't know its best to avoid sending ath9k more skbs on a separate virtual wiphy. The same issue is present for reliving the skb queue. Since ath9k does not keep track of which virtual wiphy is hammering on TX silence all wiphy's TX when we're low on buffer space. When we're free on buffer space only bother informing the virtual wiphy which is active that we have free buffers. Cc: Jouni.Malinen Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 59ce7ec..4169d2b 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -695,5 +695,8 @@ void ath9k_wiphy_work(struct work_struct *work); bool ath9k_all_wiphys_idle(struct ath_softc *sc); void ath9k_set_wiphy_idle(struct ath_wiphy *aphy, bool idle); +void ath_mac80211_stop_queue(struct ath_softc *sc, u16 skb_queue); +void ath_mac80211_start_queue(struct ath_softc *sc, u16 skb_queue); + int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype); #endif /* ATH9K_H */ diff --git a/drivers/net/wireless/ath/ath9k/virtual.c b/drivers/net/wireless/ath/ath9k/virtual.c index 69a871b..0a36b57 100644 --- a/drivers/net/wireless/ath/ath9k/virtual.c +++ b/drivers/net/wireless/ath/ath9k/virtual.c @@ -697,3 +697,55 @@ void ath9k_set_wiphy_idle(struct ath_wiphy *aphy, bool idle) wiphy_name(aphy->hw->wiphy), idle ? "idle" : "not-idle"); } +/* Only bother starting a queue on an active virtual wiphy */ +void ath_mac80211_start_queue(struct ath_softc *sc, u16 skb_queue) +{ + struct ieee80211_hw *hw = sc->pri_wiphy->hw; + unsigned int i; + + spin_lock_bh(&sc->wiphy_lock); + + /* Start the primary wiphy */ + if (sc->pri_wiphy->state == ATH_WIPHY_ACTIVE) { + ieee80211_wake_queue(hw, skb_queue); + goto unlock; + } + + /* Now start the secondary wiphy queues */ + for (i = 0; i < sc->num_sec_wiphy; i++) { + struct ath_wiphy *aphy = sc->sec_wiphy[i]; + if (!aphy) + continue; + if (aphy->state != ATH_WIPHY_ACTIVE) + continue; + + hw = aphy->hw; + ieee80211_wake_queue(hw, skb_queue); + break; + } + +unlock: + spin_unlock_bh(&sc->wiphy_lock); +} + +/* Go ahead and propagate information to all virtual wiphys, it won't hurt */ +void ath_mac80211_stop_queue(struct ath_softc *sc, u16 skb_queue) +{ + struct ieee80211_hw *hw = sc->pri_wiphy->hw; + unsigned int i; + + spin_lock_bh(&sc->wiphy_lock); + + /* Stop the primary wiphy */ + ieee80211_stop_queue(hw, skb_queue); + + /* Now stop the secondary wiphy queues */ + for (i = 0; i < sc->num_sec_wiphy; i++) { + struct ath_wiphy *aphy = sc->sec_wiphy[i]; + if (!aphy) + continue; + hw = aphy->hw; + ieee80211_stop_queue(hw, skb_queue); + } + spin_unlock_bh(&sc->wiphy_lock); +} diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index fc06768..86b54dd 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -915,9 +915,10 @@ int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype) struct ath_txq *ath_test_get_txq(struct ath_softc *sc, struct sk_buff *skb) { struct ath_txq *txq = NULL; + u16 skb_queue = skb_get_queue_mapping(skb); int qnum; - qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc); + qnum = ath_get_hal_qnum(skb_queue, sc); txq = &sc->tx.txq[qnum]; spin_lock_bh(&txq->axq_lock); @@ -926,7 +927,7 @@ struct ath_txq *ath_test_get_txq(struct ath_softc *sc, struct sk_buff *skb) ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_XMIT, "TX queue: %d is full, depth: %d\n", qnum, txq->axq_depth); - ieee80211_stop_queue(sc->hw, skb_get_queue_mapping(skb)); + ath_mac80211_stop_queue(sc, skb_queue); txq->stopped = 1; spin_unlock_bh(&txq->axq_lock); return NULL; @@ -1705,8 +1706,7 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb, * on the queue */ spin_lock_bh(&txq->axq_lock); if (sc->tx.txq[txq->axq_qnum].axq_depth > 1) { - ieee80211_stop_queue(sc->hw, - skb_get_queue_mapping(skb)); + ath_mac80211_stop_queue(sc, skb_get_queue_mapping(skb)); txq->stopped = 1; } spin_unlock_bh(&txq->axq_lock); @@ -1946,7 +1946,7 @@ static void ath_wake_mac80211_queue(struct ath_softc *sc, struct ath_txq *txq) sc->tx.txq[txq->axq_qnum].axq_depth <= (ATH_TXBUF - 20)) { qnum = ath_get_mac80211_qnum(txq->axq_qnum, sc); if (qnum != -1) { - ieee80211_wake_queue(sc->hw, qnum); + ath_mac80211_start_queue(sc, qnum); txq->stopped = 0; } } -- cgit v0.10.2 From 26ab2645b478fd98aa1d10a07eb07f2235bc1f1c Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 2 Nov 2009 18:49:56 -0800 Subject: ath9k: do not pass the entire descriptor to ath_rx_prepare() Its not needed, so just pass the hardware RX status. We'll be simplfying ath_rx_prepare() with code we can share between ath9k and ath9k_htc. This will help make that code easier to read and manage. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index c6904f0..fd45f77 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -106,7 +106,7 @@ static u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp) * decryption key or real decryption error. This let us keep statistics there. */ static int ath_rx_prepare(struct ieee80211_hw *hw, - struct sk_buff *skb, struct ath_desc *ds, + struct sk_buff *skb, struct ath_rx_status *rx_stats, struct ieee80211_rx_status *rx_status, bool *decrypt_error, struct ath_softc *sc) { @@ -121,7 +121,7 @@ static int ath_rx_prepare(struct ieee80211_hw *hw, fc = hdr->frame_control; memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); - if (ds->ds_rxstat.rs_more) { + if (rx_stats->rs_more) { /* * Frame spans multiple descriptors; this cannot happen yet * as we don't support jumbograms. If not in monitor mode, @@ -130,22 +130,22 @@ static int ath_rx_prepare(struct ieee80211_hw *hw, */ if (sc->sc_ah->opmode != NL80211_IFTYPE_MONITOR) goto rx_next; - } else if (ds->ds_rxstat.rs_status != 0) { - if (ds->ds_rxstat.rs_status & ATH9K_RXERR_CRC) + } else if (rx_stats->rs_status != 0) { + if (rx_stats->rs_status & ATH9K_RXERR_CRC) rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; - if (ds->ds_rxstat.rs_status & ATH9K_RXERR_PHY) + if (rx_stats->rs_status & ATH9K_RXERR_PHY) goto rx_next; - if (ds->ds_rxstat.rs_status & ATH9K_RXERR_DECRYPT) { + if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) { *decrypt_error = true; - } else if (ds->ds_rxstat.rs_status & ATH9K_RXERR_MIC) { + } else if (rx_stats->rs_status & ATH9K_RXERR_MIC) { if (ieee80211_is_ctl(fc)) /* * Sometimes, we get invalid * MIC failures on valid control frames. * Remove these mic errors. */ - ds->ds_rxstat.rs_status &= ~ATH9K_RXERR_MIC; + rx_stats->rs_status &= ~ATH9K_RXERR_MIC; else rx_status->flag |= RX_FLAG_MMIC_ERROR; } @@ -155,26 +155,26 @@ static int ath_rx_prepare(struct ieee80211_hw *hw, * we also ignore the CRC error. */ if (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR) { - if (ds->ds_rxstat.rs_status & + if (rx_stats->rs_status & ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | ATH9K_RXERR_CRC)) goto rx_next; } else { - if (ds->ds_rxstat.rs_status & + if (rx_stats->rs_status & ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) { goto rx_next; } } } - ratecode = ds->ds_rxstat.rs_rate; + ratecode = rx_stats->rs_rate; if (ratecode & 0x80) { /* HT rate */ rx_status->flag |= RX_FLAG_HT; - if (ds->ds_rxstat.rs_flags & ATH9K_RX_2040) + if (rx_stats->rs_flags & ATH9K_RX_2040) rx_status->flag |= RX_FLAG_40MHZ; - if (ds->ds_rxstat.rs_flags & ATH9K_RX_GI) + if (rx_stats->rs_flags & ATH9K_RX_GI) rx_status->flag |= RX_FLAG_SHORT_GI; rx_status->rate_idx = ratecode & 0x7f; } else { @@ -204,31 +204,31 @@ static int ath_rx_prepare(struct ieee80211_hw *hw, sta = ieee80211_find_sta_by_hw(hw, hdr->addr2); if (sta) { an = (struct ath_node *) sta->drv_priv; - if (ds->ds_rxstat.rs_rssi != ATH9K_RSSI_BAD && - !ds->ds_rxstat.rs_moreaggr) - ATH_RSSI_LPF(an->last_rssi, ds->ds_rxstat.rs_rssi); + if (rx_stats->rs_rssi != ATH9K_RSSI_BAD && + !rx_stats->rs_moreaggr) + ATH_RSSI_LPF(an->last_rssi, rx_stats->rs_rssi); last_rssi = an->last_rssi; } rcu_read_unlock(); if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER)) - ds->ds_rxstat.rs_rssi = ATH_EP_RND(last_rssi, - ATH_RSSI_EP_MULTIPLIER); - if (ds->ds_rxstat.rs_rssi < 0) - ds->ds_rxstat.rs_rssi = 0; - else if (ds->ds_rxstat.rs_rssi > 127) - ds->ds_rxstat.rs_rssi = 127; + rx_stats->rs_rssi = ATH_EP_RND(last_rssi, + ATH_RSSI_EP_MULTIPLIER); + if (rx_stats->rs_rssi < 0) + rx_stats->rs_rssi = 0; + else if (rx_stats->rs_rssi > 127) + rx_stats->rs_rssi = 127; /* Update Beacon RSSI, this is used by ANI. */ if (ieee80211_is_beacon(fc)) - sc->sc_ah->stats.avgbrssi = ds->ds_rxstat.rs_rssi; + sc->sc_ah->stats.avgbrssi = rx_stats->rs_rssi; - rx_status->mactime = ath_extend_tsf(sc, ds->ds_rxstat.rs_tstamp); + rx_status->mactime = ath_extend_tsf(sc, rx_stats->rs_tstamp); rx_status->band = hw->conf.channel->band; rx_status->freq = hw->conf.channel->center_freq; rx_status->noise = sc->ani.noise_floor; - rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + ds->ds_rxstat.rs_rssi; - rx_status->antenna = ds->ds_rxstat.rs_antenna; + rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + rx_stats->rs_rssi; + rx_status->antenna = rx_stats->rs_antenna; /* * Theory for reporting quality: @@ -252,9 +252,9 @@ static int ath_rx_prepare(struct ieee80211_hw *hw, * */ if (conf_is_ht(&hw->conf)) - rx_status->qual = ds->ds_rxstat.rs_rssi * 100 / 45; + rx_status->qual = rx_stats->rs_rssi * 100 / 45; else - rx_status->qual = ds->ds_rxstat.rs_rssi * 100 / 35; + rx_status->qual = rx_stats->rs_rssi * 100 / 35; /* rssi can be more than 45 though, anything above that * should be considered at 100% */ @@ -659,6 +659,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) struct ath_buf *bf; struct ath_desc *ds; + struct ath_rx_status *rx_stats; struct sk_buff *skb = NULL, *requeue_skb; struct ieee80211_rx_status rx_status; struct ath_hw *ah = sc->sc_ah; @@ -750,6 +751,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) hdr = (struct ieee80211_hdr *) skb->data; hw = ath_get_virt_hw(sc, hdr); + rx_stats = &ds->ds_rxstat; /* * If we're asked to flush receive queue, directly @@ -758,14 +760,14 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) if (flush) goto requeue; - if (!ds->ds_rxstat.rs_datalen) + if (!rx_stats->rs_datalen) goto requeue; /* The status portion of the descriptor could get corrupted. */ - if (sc->rx.bufsize < ds->ds_rxstat.rs_datalen) + if (sc->rx.bufsize < rx_stats->rs_datalen) goto requeue; - if (!ath_rx_prepare(hw, skb, ds, + if (!ath_rx_prepare(hw, skb, rx_stats, &rx_status, &decrypt_error, sc)) goto requeue; @@ -785,7 +787,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) sc->rx.bufsize, DMA_FROM_DEVICE); - skb_put(skb, ds->ds_rxstat.rs_datalen); + skb_put(skb, rx_stats->rs_datalen); /* see if any padding is done by the hw and remove it */ hdrlen = ieee80211_get_hdrlen_from_skb(skb); @@ -805,7 +807,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) skb_pull(skb, padsize); } - keyix = ds->ds_rxstat.rs_keyix; + keyix = rx_stats->rs_keyix; if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) { rx_status.flag |= RX_FLAG_DECRYPTED; @@ -845,7 +847,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) */ if (sc->rx.defant != ds->ds_rxstat.rs_antenna) { if (++sc->rx.rxotherant >= 3) - ath_setdefantenna(sc, ds->ds_rxstat.rs_antenna); + ath_setdefantenna(sc, rx_stats->rs_antenna); } else { sc->rx.rxotherant = 0; } -- cgit v0.10.2 From 30cbd42265546a3efa146d4eb3456165325c83a7 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 3 Nov 2009 16:10:46 -0800 Subject: ath9k_hw: move ath_extend_tsf() to hw code to share as ath9k_hw_extend_tsf() This will be shared between ath9k and ath9k_htc. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 111ff04..b25eedf 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -3710,6 +3710,21 @@ void ath9k_hw_set_tsfadjust(struct ath_hw *ah, u32 setting) } EXPORT_SYMBOL(ath9k_hw_set_tsfadjust); +/* + * Extend 15-bit time stamp from rx descriptor to + * a full 64-bit TSF using the current h/w TSF. +*/ +u64 ath9k_hw_extend_tsf(struct ath_hw *ah, u32 rstamp) +{ + u64 tsf; + + tsf = ath9k_hw_gettsf64(ah); + if ((tsf & 0x7fff) < rstamp) + tsf -= 0x8000; + return (tsf & ~0x7fff) | rstamp; +} +EXPORT_SYMBOL(ath9k_hw_extend_tsf); + bool ath9k_hw_setslottime(struct ath_hw *ah, u32 us) { if (us < ATH9K_SLOT_TIME_9 || us > ath9k_hw_mac_to_usec(ah, 0xffff)) { diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index c7b0c4d..6d3e314 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -689,6 +689,7 @@ u64 ath9k_hw_gettsf64(struct ath_hw *ah); void ath9k_hw_settsf64(struct ath_hw *ah, u64 tsf64); void ath9k_hw_reset_tsf(struct ath_hw *ah); void ath9k_hw_set_tsfadjust(struct ath_hw *ah, u32 setting); +u64 ath9k_hw_extend_tsf(struct ath_hw *ah, u32 rstamp); bool ath9k_hw_setslottime(struct ath_hw *ah, u32 us); void ath9k_hw_set11nmac2040(struct ath_hw *ah); void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period); diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index fd45f77..b27ea89 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -87,20 +87,6 @@ static void ath_setdefantenna(struct ath_softc *sc, u32 antenna) } /* - * Extend 15-bit time stamp from rx descriptor to - * a full 64-bit TSF using the current h/w TSF. -*/ -static u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp) -{ - u64 tsf; - - tsf = ath9k_hw_gettsf64(sc->sc_ah); - if ((tsf & 0x7fff) < rstamp) - tsf -= 0x8000; - return (tsf & ~0x7fff) | rstamp; -} - -/* * For Decrypt or Demic errors, we only mark packet status here and always push * up the frame up to let mac80211 handle the actual error case, be it no * decryption key or real decryption error. This let us keep statistics there. @@ -223,7 +209,7 @@ static int ath_rx_prepare(struct ieee80211_hw *hw, if (ieee80211_is_beacon(fc)) sc->sc_ah->stats.avgbrssi = rx_stats->rs_rssi; - rx_status->mactime = ath_extend_tsf(sc, rx_stats->rs_tstamp); + rx_status->mactime = ath9k_hw_extend_tsf(sc->sc_ah, rx_stats->rs_tstamp); rx_status->band = hw->conf.channel->band; rx_status->freq = hw->conf.channel->center_freq; rx_status->noise = sc->ani.noise_floor; -- cgit v0.10.2 From 3d536acf45ba65acb15fc65bf46f8d6c7ad6c463 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 3 Nov 2009 17:07:04 -0800 Subject: ath9k: move struct ath_ani to common area This can be shared between ath9k and ath9k_htc. It will also help with sharing routine helpers on the RX path. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h index 5e19a73..b3c8ee0 100644 --- a/drivers/net/wireless/ath/ath.h +++ b/drivers/net/wireless/ath/ath.h @@ -23,6 +23,16 @@ static const u8 ath_bcast_mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; +struct ath_ani { + bool caldone; + int16_t noise_floor; + unsigned int longcal_timer; + unsigned int shortcal_timer; + unsigned int resetcal_timer; + unsigned int checkani_timer; + struct timer_list timer; +}; + enum ath_device_state { ATH_HW_UNAVAILABLE, ATH_HW_INITIALIZED, @@ -66,6 +76,8 @@ struct ath_common { int debug_mask; enum ath_device_state state; + struct ath_ani ani; + u16 cachelsz; u16 curaid; u8 macaddr[ETH_ALEN]; diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 4169d2b..24f61fd 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -434,16 +434,6 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vif *avp); #define ATH_LONG_CALINTERVAL 30000 /* 30 seconds */ #define ATH_RESTART_CALINTERVAL 1200000 /* 20 minutes */ -struct ath_ani { - bool caldone; - int16_t noise_floor; - unsigned int longcal_timer; - unsigned int shortcal_timer; - unsigned int resetcal_timer; - unsigned int checkani_timer; - struct timer_list timer; -}; - /* Defines the BT AR_BT_COEX_WGHT used */ enum ath_stomp_type { ATH_BTCOEX_NO_STOMP, @@ -601,7 +591,6 @@ struct ath_softc { int beacon_interval; - struct ath_ani ani; #ifdef CONFIG_ATH9K_DEBUG struct ath9k_debug debug; #endif diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 11aaa7d..01ac897 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -405,34 +405,34 @@ static void ath_ani_calibrate(unsigned long data) ath9k_ps_wakeup(sc); /* Long calibration runs independently of short calibration. */ - if ((timestamp - sc->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) { + if ((timestamp - common->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) { longcal = true; ath_print(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies); - sc->ani.longcal_timer = timestamp; + common->ani.longcal_timer = timestamp; } /* Short calibration applies only while caldone is false */ - if (!sc->ani.caldone) { - if ((timestamp - sc->ani.shortcal_timer) >= short_cal_interval) { + if (!common->ani.caldone) { + if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) { shortcal = true; ath_print(common, ATH_DBG_ANI, "shortcal @%lu\n", jiffies); - sc->ani.shortcal_timer = timestamp; - sc->ani.resetcal_timer = timestamp; + common->ani.shortcal_timer = timestamp; + common->ani.resetcal_timer = timestamp; } } else { - if ((timestamp - sc->ani.resetcal_timer) >= + if ((timestamp - common->ani.resetcal_timer) >= ATH_RESTART_CALINTERVAL) { - sc->ani.caldone = ath9k_hw_reset_calvalid(ah); - if (sc->ani.caldone) - sc->ani.resetcal_timer = timestamp; + common->ani.caldone = ath9k_hw_reset_calvalid(ah); + if (common->ani.caldone) + common->ani.resetcal_timer = timestamp; } } /* Verify whether we must check ANI */ - if ((timestamp - sc->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) { + if ((timestamp - common->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) { aniflag = true; - sc->ani.checkani_timer = timestamp; + common->ani.checkani_timer = timestamp; } /* Skip all processing if there's nothing to do. */ @@ -443,21 +443,21 @@ static void ath_ani_calibrate(unsigned long data) /* Perform calibration if necessary */ if (longcal || shortcal) { - sc->ani.caldone = + common->ani.caldone = ath9k_hw_calibrate(ah, ah->curchan, common->rx_chainmask, longcal); if (longcal) - sc->ani.noise_floor = ath9k_hw_getchan_noise(ah, + common->ani.noise_floor = ath9k_hw_getchan_noise(ah, ah->curchan); ath_print(common, ATH_DBG_ANI, " calibrate chan %u/%x nf: %d\n", ah->curchan->channel, ah->curchan->channelFlags, - sc->ani.noise_floor); + common->ani.noise_floor); } } @@ -473,21 +473,21 @@ set_timer: cal_interval = ATH_LONG_CALINTERVAL; if (sc->sc_ah->config.enable_ani) cal_interval = min(cal_interval, (u32)ATH_ANI_POLLINTERVAL); - if (!sc->ani.caldone) + if (!common->ani.caldone) cal_interval = min(cal_interval, (u32)short_cal_interval); - mod_timer(&sc->ani.timer, jiffies + msecs_to_jiffies(cal_interval)); + mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval)); } -static void ath_start_ani(struct ath_softc *sc) +static void ath_start_ani(struct ath_common *common) { unsigned long timestamp = jiffies_to_msecs(jiffies); - sc->ani.longcal_timer = timestamp; - sc->ani.shortcal_timer = timestamp; - sc->ani.checkani_timer = timestamp; + common->ani.longcal_timer = timestamp; + common->ani.shortcal_timer = timestamp; + common->ani.checkani_timer = timestamp; - mod_timer(&sc->ani.timer, + mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL)); } @@ -1023,12 +1023,12 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc, /* Reset rssi stats */ sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER; - ath_start_ani(sc); + ath_start_ani(common); } else { ath_print(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n"); common->curaid = 0; /* Stop ANI */ - del_timer_sync(&sc->ani.timer); + del_timer_sync(&common->ani.timer); } } @@ -1761,8 +1761,8 @@ static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid, /* Initializes the noise floor to a reasonable default value. * Later on this will be updated during ANI processing. */ - sc->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR; - setup_timer(&sc->ani.timer, ath_ani_calibrate, (unsigned long)sc); + common->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR; + setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc); if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, ATH9K_CIPHER_TKIP, NULL)) { @@ -2634,7 +2634,7 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, if (conf->type == NL80211_IFTYPE_AP || conf->type == NL80211_IFTYPE_ADHOC || conf->type == NL80211_IFTYPE_MONITOR) - ath_start_ani(sc); + ath_start_ani(common); out: mutex_unlock(&sc->mutex); @@ -2655,7 +2655,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, mutex_lock(&sc->mutex); /* Stop ANI */ - del_timer_sync(&sc->ani.timer); + del_timer_sync(&common->ani.timer); /* Reclaim beacon resources */ if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) || diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index b27ea89..403debb 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -102,6 +102,7 @@ static int ath_rx_prepare(struct ieee80211_hw *hw, struct ieee80211_sta *sta; struct ath_node *an; int last_rssi = ATH_RSSI_DUMMY_MARKER; + struct ath_common *common = ath9k_hw_common(sc->sc_ah); hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; @@ -212,7 +213,7 @@ static int ath_rx_prepare(struct ieee80211_hw *hw, rx_status->mactime = ath9k_hw_extend_tsf(sc->sc_ah, rx_stats->rs_tstamp); rx_status->band = hw->conf.channel->band; rx_status->freq = hw->conf.channel->center_freq; - rx_status->noise = sc->ani.noise_floor; + rx_status->noise = common->ani.noise_floor; rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + rx_stats->rs_rssi; rx_status->antenna = rx_stats->rs_antenna; -- cgit v0.10.2 From 712c13a86affe69dd8462631808edd5825b5e1cb Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 3 Nov 2009 15:57:16 -0800 Subject: ath9k: use the ieee80211_hw to get to an sband on ath_rx_prepare() No need to use the private driver structure to get to an sband. This will make it easier to share this code with ath9k_htc. With the sc gone we can now just pass the common structure to ath_rx_prepare(). Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 403debb..fa78914 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -91,18 +91,19 @@ static void ath_setdefantenna(struct ath_softc *sc, u32 antenna) * up the frame up to let mac80211 handle the actual error case, be it no * decryption key or real decryption error. This let us keep statistics there. */ -static int ath_rx_prepare(struct ieee80211_hw *hw, +static int ath_rx_prepare(struct ath_common *common, + struct ieee80211_hw *hw, struct sk_buff *skb, struct ath_rx_status *rx_stats, - struct ieee80211_rx_status *rx_status, bool *decrypt_error, - struct ath_softc *sc) + struct ieee80211_rx_status *rx_status, + bool *decrypt_error) { + struct ath_hw *ah = common->ah; struct ieee80211_hdr *hdr; u8 ratecode; __le16 fc; struct ieee80211_sta *sta; struct ath_node *an; int last_rssi = ATH_RSSI_DUMMY_MARKER; - struct ath_common *common = ath9k_hw_common(sc->sc_ah); hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; @@ -115,7 +116,7 @@ static int ath_rx_prepare(struct ieee80211_hw *hw, * discard the frame. Enable this if you want to see * error frames in Monitor mode. */ - if (sc->sc_ah->opmode != NL80211_IFTYPE_MONITOR) + if (ah->opmode != NL80211_IFTYPE_MONITOR) goto rx_next; } else if (rx_stats->rs_status != 0) { if (rx_stats->rs_status & ATH9K_RXERR_CRC) @@ -141,7 +142,7 @@ static int ath_rx_prepare(struct ieee80211_hw *hw, * decryption and MIC failures. For monitor mode, * we also ignore the CRC error. */ - if (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR) { + if (ah->opmode == NL80211_IFTYPE_MONITOR) { if (rx_stats->rs_status & ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | ATH9K_RXERR_CRC)) @@ -165,20 +166,20 @@ static int ath_rx_prepare(struct ieee80211_hw *hw, rx_status->flag |= RX_FLAG_SHORT_GI; rx_status->rate_idx = ratecode & 0x7f; } else { - int i = 0, cur_band, n_rates; + struct ieee80211_supported_band *sband; + unsigned int i = 0; + enum ieee80211_band band; - cur_band = hw->conf.channel->band; - n_rates = sc->sbands[cur_band].n_bitrates; + band = hw->conf.channel->band; + sband = hw->wiphy->bands[band]; - for (i = 0; i < n_rates; i++) { - if (sc->sbands[cur_band].bitrates[i].hw_value == - ratecode) { + for (i = 0; i < sband->n_bitrates; i++) { + if (sband->bitrates[i].hw_value == rx_stats->rs_rate) { rx_status->rate_idx = i; break; } - - if (sc->sbands[cur_band].bitrates[i].hw_value_short == - ratecode) { + if (sband->bitrates[i].hw_value_short == + rx_stats->rs_rate) { rx_status->rate_idx = i; rx_status->flag |= RX_FLAG_SHORTPRE; break; @@ -208,9 +209,9 @@ static int ath_rx_prepare(struct ieee80211_hw *hw, /* Update Beacon RSSI, this is used by ANI. */ if (ieee80211_is_beacon(fc)) - sc->sc_ah->stats.avgbrssi = rx_stats->rs_rssi; + ah->stats.avgbrssi = rx_stats->rs_rssi; - rx_status->mactime = ath9k_hw_extend_tsf(sc->sc_ah, rx_stats->rs_tstamp); + rx_status->mactime = ath9k_hw_extend_tsf(ah, rx_stats->rs_tstamp); rx_status->band = hw->conf.channel->band; rx_status->freq = hw->conf.channel->center_freq; rx_status->noise = common->ani.noise_floor; @@ -754,8 +755,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) if (sc->rx.bufsize < rx_stats->rs_datalen) goto requeue; - if (!ath_rx_prepare(hw, skb, rx_stats, - &rx_status, &decrypt_error, sc)) + if (!ath_rx_prepare(common, hw, skb, rx_stats, + &rx_status, &decrypt_error)) goto requeue; /* Ensure we always have an skb to requeue once we are done -- cgit v0.10.2 From 207e96854e39380fce8b589bbbdaf6e9a83b9151 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 3 Nov 2009 17:39:00 -0800 Subject: ath9k: move RX check code into helper ath9k_rx_accept() This does sanity checking on the skb and RX status descriptor prior to processing. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index fa78914..6e00eaf 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -86,28 +86,19 @@ static void ath_setdefantenna(struct ath_softc *sc, u32 antenna) sc->rx.rxotherant = 0; } -/* - * For Decrypt or Demic errors, we only mark packet status here and always push - * up the frame up to let mac80211 handle the actual error case, be it no - * decryption key or real decryption error. This let us keep statistics there. - */ -static int ath_rx_prepare(struct ath_common *common, - struct ieee80211_hw *hw, - struct sk_buff *skb, struct ath_rx_status *rx_stats, - struct ieee80211_rx_status *rx_status, - bool *decrypt_error) +/* Assumes you've already done the endian to CPU conversion */ +static bool ath9k_rx_accept(struct ath_common *common, + struct sk_buff *skb, + struct ieee80211_rx_status *rxs, + struct ath_rx_status *rx_stats, + bool *decrypt_error) { struct ath_hw *ah = common->ah; struct ieee80211_hdr *hdr; - u8 ratecode; __le16 fc; - struct ieee80211_sta *sta; - struct ath_node *an; - int last_rssi = ATH_RSSI_DUMMY_MARKER; - hdr = (struct ieee80211_hdr *)skb->data; + hdr = (struct ieee80211_hdr *) skb->data; fc = hdr->frame_control; - memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); if (rx_stats->rs_more) { /* @@ -117,12 +108,12 @@ static int ath_rx_prepare(struct ath_common *common, * error frames in Monitor mode. */ if (ah->opmode != NL80211_IFTYPE_MONITOR) - goto rx_next; + return false; } else if (rx_stats->rs_status != 0) { if (rx_stats->rs_status & ATH9K_RXERR_CRC) - rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; + rxs->flag |= RX_FLAG_FAILED_FCS_CRC; if (rx_stats->rs_status & ATH9K_RXERR_PHY) - goto rx_next; + return false; if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) { *decrypt_error = true; @@ -135,7 +126,7 @@ static int ath_rx_prepare(struct ath_common *common, */ rx_stats->rs_status &= ~ATH9K_RXERR_MIC; else - rx_status->flag |= RX_FLAG_MMIC_ERROR; + rxs->flag |= RX_FLAG_MMIC_ERROR; } /* * Reject error frames with the exception of @@ -146,14 +137,42 @@ static int ath_rx_prepare(struct ath_common *common, if (rx_stats->rs_status & ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | ATH9K_RXERR_CRC)) - goto rx_next; + return false; } else { if (rx_stats->rs_status & ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) { - goto rx_next; + return false; } } } + return true; +} + +/* + * For Decrypt or Demic errors, we only mark packet status here and always push + * up the frame up to let mac80211 handle the actual error case, be it no + * decryption key or real decryption error. This let us keep statistics there. + */ +static int ath_rx_prepare(struct ath_common *common, + struct ieee80211_hw *hw, + struct sk_buff *skb, struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rx_status, + bool *decrypt_error) +{ + struct ath_hw *ah = common->ah; + struct ieee80211_hdr *hdr; + u8 ratecode; + __le16 fc; + struct ieee80211_sta *sta; + struct ath_node *an; + int last_rssi = ATH_RSSI_DUMMY_MARKER; + + hdr = (struct ieee80211_hdr *)skb->data; + fc = hdr->frame_control; + memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); + + if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error)) + goto rx_next; ratecode = rx_stats->rs_rate; -- cgit v0.10.2 From 14077f5b7a28bdcd166faed2c0b36fad9f3eadda Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 3 Nov 2009 17:52:33 -0800 Subject: ath9k: remove temp variable ratecode from ath_rx_prepare() Its just a distraction when reading the code, instead use the rx_stats->rs_rate directly. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 6e00eaf..9e6dded 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -161,7 +161,6 @@ static int ath_rx_prepare(struct ath_common *common, { struct ath_hw *ah = common->ah; struct ieee80211_hdr *hdr; - u8 ratecode; __le16 fc; struct ieee80211_sta *sta; struct ath_node *an; @@ -174,16 +173,14 @@ static int ath_rx_prepare(struct ath_common *common, if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error)) goto rx_next; - ratecode = rx_stats->rs_rate; - - if (ratecode & 0x80) { + if (rx_stats->rs_rate & 0x80) { /* HT rate */ rx_status->flag |= RX_FLAG_HT; if (rx_stats->rs_flags & ATH9K_RX_2040) rx_status->flag |= RX_FLAG_40MHZ; if (rx_stats->rs_flags & ATH9K_RX_GI) rx_status->flag |= RX_FLAG_SHORT_GI; - rx_status->rate_idx = ratecode & 0x7f; + rx_status->rate_idx = rx_stats->rs_rate & 0x7f; } else { struct ieee80211_supported_band *sband; unsigned int i = 0; -- cgit v0.10.2 From 9878841e1360266fa4522fbdc2448fcdce95e0dd Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 3 Nov 2009 18:10:30 -0800 Subject: ath9k: move rate descriptor reading into a helper ath9k_process_rate() now does all the rx status processing to read the rate the hardware passed and translate it to whatever mac80211 wants. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 9e6dded..9eae946 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -148,6 +148,47 @@ static bool ath9k_rx_accept(struct ath_common *common, return true; } +static u8 ath9k_process_rate(struct ath_common *common, + struct ieee80211_hw *hw, + struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rxs, + struct sk_buff *skb) +{ + struct ieee80211_supported_band *sband; + enum ieee80211_band band; + unsigned int i = 0; + + band = hw->conf.channel->band; + sband = hw->wiphy->bands[band]; + + if (rx_stats->rs_rate & 0x80) { + /* HT rate */ + rxs->flag |= RX_FLAG_HT; + if (rx_stats->rs_flags & ATH9K_RX_2040) + rxs->flag |= RX_FLAG_40MHZ; + if (rx_stats->rs_flags & ATH9K_RX_GI) + rxs->flag |= RX_FLAG_SHORT_GI; + return rx_stats->rs_rate & 0x7f; + } + + for (i = 0; i < sband->n_bitrates; i++) { + if (sband->bitrates[i].hw_value == rx_stats->rs_rate) + return i; + if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) { + rxs->flag |= RX_FLAG_SHORTPRE; + return i; + } + } + + /* No valid hardware bitrate found -- we should not get here */ + ath_print(common, ATH_DBG_XMIT, "unsupported hw bitrate detected " + "0x%02x using 1 Mbit\n", rx_stats->rs_rate); + if ((common->debug_mask & ATH_DBG_XMIT)) + print_hex_dump_bytes("", DUMP_PREFIX_NONE, skb->data, skb->len); + + return 0; +} + /* * For Decrypt or Demic errors, we only mark packet status here and always push * up the frame up to let mac80211 handle the actual error case, be it no @@ -173,35 +214,6 @@ static int ath_rx_prepare(struct ath_common *common, if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error)) goto rx_next; - if (rx_stats->rs_rate & 0x80) { - /* HT rate */ - rx_status->flag |= RX_FLAG_HT; - if (rx_stats->rs_flags & ATH9K_RX_2040) - rx_status->flag |= RX_FLAG_40MHZ; - if (rx_stats->rs_flags & ATH9K_RX_GI) - rx_status->flag |= RX_FLAG_SHORT_GI; - rx_status->rate_idx = rx_stats->rs_rate & 0x7f; - } else { - struct ieee80211_supported_band *sband; - unsigned int i = 0; - enum ieee80211_band band; - - band = hw->conf.channel->band; - sband = hw->wiphy->bands[band]; - - for (i = 0; i < sband->n_bitrates; i++) { - if (sband->bitrates[i].hw_value == rx_stats->rs_rate) { - rx_status->rate_idx = i; - break; - } - if (sband->bitrates[i].hw_value_short == - rx_stats->rs_rate) { - rx_status->rate_idx = i; - rx_status->flag |= RX_FLAG_SHORTPRE; - break; - } - } - } rcu_read_lock(); /* XXX: use ieee80211_find_sta! */ @@ -227,6 +239,8 @@ static int ath_rx_prepare(struct ath_common *common, if (ieee80211_is_beacon(fc)) ah->stats.avgbrssi = rx_stats->rs_rssi; + rx_status->rate_idx = ath9k_process_rate(common, hw, + rx_stats, rx_status, skb); rx_status->mactime = ath9k_hw_extend_tsf(ah, rx_stats->rs_tstamp); rx_status->band = hw->conf.channel->band; rx_status->freq = hw->conf.channel->center_freq; -- cgit v0.10.2 From 21b22738068366d7740b4b7cf55ce270f479543a Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 3 Nov 2009 18:20:26 -0800 Subject: ath9k: move qual processing into a helper This moves the qual computing into a small helper, ath9k_compute_qual() Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 9eae946..d357b9a 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -190,6 +190,47 @@ static u8 ath9k_process_rate(struct ath_common *common, } /* + * Theory for reporting quality: + * + * At a hardware RSSI of 45 you will be able to use MCS 7 reliably. + * At a hardware RSSI of 45 you will be able to use MCS 15 reliably. + * At a hardware RSSI of 35 you should be able use 54 Mbps reliably. + * + * MCS 7 is the highets MCS index usable by a 1-stream device. + * MCS 15 is the highest MCS index usable by a 2-stream device. + * + * All ath9k devices are either 1-stream or 2-stream. + * + * How many bars you see is derived from the qual reporting. + * + * A more elaborate scheme can be used here but it requires tables + * of SNR/throughput for each possible mode used. For the MCS table + * you can refer to the wireless wiki: + * + * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n + * + */ +static int ath9k_compute_qual(struct ieee80211_hw *hw, + struct ath_rx_status *rx_stats) +{ + int qual; + + if (conf_is_ht(&hw->conf)) + qual = rx_stats->rs_rssi * 100 / 45; + else + qual = rx_stats->rs_rssi * 100 / 35; + + /* + * rssi can be more than 45 though, anything above that + * should be considered at 100% + */ + if (qual > 100) + qual = 100; + + return qual; +} + +/* * For Decrypt or Demic errors, we only mark packet status here and always push * up the frame up to let mac80211 handle the actual error case, be it no * decryption key or real decryption error. This let us keep statistics there. @@ -247,38 +288,7 @@ static int ath_rx_prepare(struct ath_common *common, rx_status->noise = common->ani.noise_floor; rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + rx_stats->rs_rssi; rx_status->antenna = rx_stats->rs_antenna; - - /* - * Theory for reporting quality: - * - * At a hardware RSSI of 45 you will be able to use MCS 7 reliably. - * At a hardware RSSI of 45 you will be able to use MCS 15 reliably. - * At a hardware RSSI of 35 you should be able use 54 Mbps reliably. - * - * MCS 7 is the highets MCS index usable by a 1-stream device. - * MCS 15 is the highest MCS index usable by a 2-stream device. - * - * All ath9k devices are either 1-stream or 2-stream. - * - * How many bars you see is derived from the qual reporting. - * - * A more elaborate scheme can be used here but it requires tables - * of SNR/throughput for each possible mode used. For the MCS table - * you can refer to the wireless wiki: - * - * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n - * - */ - if (conf_is_ht(&hw->conf)) - rx_status->qual = rx_stats->rs_rssi * 100 / 45; - else - rx_status->qual = rx_stats->rs_rssi * 100 / 35; - - /* rssi can be more than 45 though, anything above that - * should be considered at 100% */ - if (rx_status->qual > 100) - rx_status->qual = 100; - + rx_status->qual = ath9k_compute_qual(hw, rx_stats); rx_status->flag |= RX_FLAG_TSFT; return 1; -- cgit v0.10.2 From dbfc22df1afbeb91d528e2f84d6603ac9ce98bc2 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 3 Nov 2009 18:35:05 -0800 Subject: ath9k: move rssi processing into a helper This moves all the RX processing of RSSI into a helper, ath_rx_prepare(). ath_rx_prepare() should now be really easy to read and follow. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index d357b9a..4c4c22f 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -230,31 +230,20 @@ static int ath9k_compute_qual(struct ieee80211_hw *hw, return qual; } -/* - * For Decrypt or Demic errors, we only mark packet status here and always push - * up the frame up to let mac80211 handle the actual error case, be it no - * decryption key or real decryption error. This let us keep statistics there. - */ -static int ath_rx_prepare(struct ath_common *common, - struct ieee80211_hw *hw, - struct sk_buff *skb, struct ath_rx_status *rx_stats, - struct ieee80211_rx_status *rx_status, - bool *decrypt_error) +static void ath9k_process_rssi(struct ath_common *common, + struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ath_rx_status *rx_stats) { struct ath_hw *ah = common->ah; - struct ieee80211_hdr *hdr; - __le16 fc; struct ieee80211_sta *sta; + struct ieee80211_hdr *hdr; struct ath_node *an; int last_rssi = ATH_RSSI_DUMMY_MARKER; + __le16 fc; hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; - memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); - - if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error)) - goto rx_next; - rcu_read_lock(); /* XXX: use ieee80211_find_sta! */ @@ -279,6 +268,27 @@ static int ath_rx_prepare(struct ath_common *common, /* Update Beacon RSSI, this is used by ANI. */ if (ieee80211_is_beacon(fc)) ah->stats.avgbrssi = rx_stats->rs_rssi; +} + +/* + * For Decrypt or Demic errors, we only mark packet status here and always push + * up the frame up to let mac80211 handle the actual error case, be it no + * decryption key or real decryption error. This let us keep statistics there. + */ +static int ath_rx_prepare(struct ath_common *common, + struct ieee80211_hw *hw, + struct sk_buff *skb, struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rx_status, + bool *decrypt_error) +{ + struct ath_hw *ah = common->ah; + + memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); + + if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error)) + goto rx_next; + + ath9k_process_rssi(common, hw, skb, rx_stats); rx_status->rate_idx = ath9k_process_rate(common, hw, rx_stats, rx_status, skb); -- cgit v0.10.2 From 5ca42627f3ddc0e4fc3e62d879cc35ab5beaaa8b Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 4 Nov 2009 08:20:42 -0800 Subject: ath9k: avoid the copy skb->cb on every RX'd skb The skb->cb (control buffer, 48 bytes) is available to the skb upon skb allocation. You can fill it up imediately after skb allocation. ath9k was copying onto the skb->cb the data from the processed skb for mac80211 from a stack struct ieee80211_rx_status structure. This is unnecessary, instead use the skb->cb for the rx status immediately after the skb becomes available and DMA synched. Additionally, avoid the copy of the skb->cb also for virtual wiphys as skb_copy() will copy over the skb->cb for us as well. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 4c4c22f..0793614 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -283,8 +283,6 @@ static int ath_rx_prepare(struct ath_common *common, { struct ath_hw *ah = common->ah; - memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); - if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error)) goto rx_next; @@ -654,7 +652,7 @@ static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb) static void ath_rx_send_to_mac80211(struct ieee80211_hw *hw, struct ath_softc *sc, struct sk_buff *skb, - struct ieee80211_rx_status *rx_status) + struct ieee80211_rx_status *rxs) { struct ieee80211_hdr *hdr; @@ -674,19 +672,14 @@ static void ath_rx_send_to_mac80211(struct ieee80211_hw *hw, if (aphy == NULL) continue; nskb = skb_copy(skb, GFP_ATOMIC); - if (nskb) { - memcpy(IEEE80211_SKB_RXCB(nskb), rx_status, - sizeof(*rx_status)); - ieee80211_rx(aphy->hw, nskb); - } + if (!nskb) + continue; + ieee80211_rx(aphy->hw, nskb); } - memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status)); ieee80211_rx(sc->hw, skb); - } else { + } else /* Deliver unicast frames based on receiver address */ - memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status)); ieee80211_rx(hw, skb); - } } int ath_rx_tasklet(struct ath_softc *sc, int flush) @@ -699,7 +692,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) struct ath_desc *ds; struct ath_rx_status *rx_stats; struct sk_buff *skb = NULL, *requeue_skb; - struct ieee80211_rx_status rx_status; + struct ieee80211_rx_status *rxs; struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); /* @@ -788,6 +781,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) DMA_FROM_DEVICE); hdr = (struct ieee80211_hdr *) skb->data; + rxs = IEEE80211_SKB_RXCB(skb); + hw = ath_get_virt_hw(sc, hdr); rx_stats = &ds->ds_rxstat; @@ -806,7 +801,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) goto requeue; if (!ath_rx_prepare(common, hw, skb, rx_stats, - &rx_status, &decrypt_error)) + rxs, &decrypt_error)) goto requeue; /* Ensure we always have an skb to requeue once we are done @@ -848,20 +843,19 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) keyix = rx_stats->rs_keyix; if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) { - rx_status.flag |= RX_FLAG_DECRYPTED; + rxs->flag |= RX_FLAG_DECRYPTED; } else if (ieee80211_has_protected(fc) && !decrypt_error && skb->len >= hdrlen + 4) { keyix = skb->data[hdrlen + 3] >> 6; if (test_bit(keyix, sc->keymap)) - rx_status.flag |= RX_FLAG_DECRYPTED; + rxs->flag |= RX_FLAG_DECRYPTED; } if (ah->sw_mgmt_crypto && - (rx_status.flag & RX_FLAG_DECRYPTED) && - ieee80211_is_mgmt(fc)) { + (rxs->flag & RX_FLAG_DECRYPTED) && + ieee80211_is_mgmt(fc)) /* Use software decrypt for management frames. */ - rx_status.flag &= ~RX_FLAG_DECRYPTED; - } + rxs->flag &= ~RX_FLAG_DECRYPTED; /* We will now give hardware our shiny new allocated skb */ bf->bf_mpdu = requeue_skb; @@ -874,7 +868,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) bf->bf_mpdu = NULL; ath_print(common, ATH_DBG_FATAL, "dma_mapping_error() on RX\n"); - ath_rx_send_to_mac80211(hw, sc, skb, &rx_status); + ath_rx_send_to_mac80211(hw, sc, skb, rxs); break; } bf->bf_dmacontext = bf->bf_buf_addr; @@ -895,7 +889,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) SC_OP_WAIT_FOR_PSPOLL_DATA))) ath_rx_ps(sc, skb); - ath_rx_send_to_mac80211(hw, sc, skb, &rx_status); + ath_rx_send_to_mac80211(hw, sc, skb, rxs); requeue: list_move_tail(&bf->list, &sc->rx.rxbuf); -- cgit v0.10.2 From 0a45da765e4bf5e8a7705266fa36e0f44787b0a1 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 4 Nov 2009 08:58:45 -0800 Subject: ath9k: move the rx_stats->rs_datalen check to ath9k_rx_accept() Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 0793614..4420a58 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -100,6 +100,9 @@ static bool ath9k_rx_accept(struct ath_common *common, hdr = (struct ieee80211_hdr *) skb->data; fc = hdr->frame_control; + if (!rx_stats->rs_datalen) + return false; + if (rx_stats->rs_more) { /* * Frame spans multiple descriptors; this cannot happen yet @@ -793,9 +796,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) if (flush) goto requeue; - if (!rx_stats->rs_datalen) - goto requeue; - /* The status portion of the descriptor could get corrupted. */ if (sc->rx.bufsize < rx_stats->rs_datalen) goto requeue; -- cgit v0.10.2 From cc861f7468724e66567baf087b4e413e91b18150 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 4 Nov 2009 09:11:34 -0800 Subject: ath: move the rx bufsize to common to share with ath5k/ath9k This will also be used by ath9k_htc. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h index b3c8ee0..4af1362 100644 --- a/drivers/net/wireless/ath/ath.h +++ b/drivers/net/wireless/ath/ath.h @@ -87,6 +87,8 @@ struct ath_common { u8 tx_chainmask; u8 rx_chainmask; + u32 rx_bufsize; + struct ath_regulatory regulatory; const struct ath_ops *ops; const struct ath_bus_ops *bus_ops; diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index cb3dc89..f1a7c77 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -323,10 +323,13 @@ static inline void ath5k_txbuf_free(struct ath5k_softc *sc, static inline void ath5k_rxbuf_free(struct ath5k_softc *sc, struct ath5k_buf *bf) { + struct ath5k_hw *ah = sc->ah; + struct ath_common *common = ath5k_hw_common(ah); + BUG_ON(!bf); if (!bf->skb) return; - pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize, + pci_unmap_single(sc->pdev, bf->skbaddr, common->rx_bufsize, PCI_DMA_FROMDEVICE); dev_kfree_skb_any(bf->skb); bf->skb = NULL; @@ -1181,17 +1184,18 @@ struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr) * fake physical layer header at the start. */ skb = ath_rxbuf_alloc(common, - sc->rxbufsize + common->cachelsz - 1, + common->rx_bufsize + common->cachelsz - 1, GFP_ATOMIC); if (!skb) { ATH5K_ERR(sc, "can't alloc skbuff of size %u\n", - sc->rxbufsize + common->cachelsz - 1); + common->rx_bufsize + common->cachelsz - 1); return NULL; } *skb_addr = pci_map_single(sc->pdev, - skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE); + skb->data, common->rx_bufsize, + PCI_DMA_FROMDEVICE); if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) { ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__); dev_kfree_skb(skb); @@ -1631,10 +1635,10 @@ ath5k_rx_start(struct ath5k_softc *sc) struct ath5k_buf *bf; int ret; - sc->rxbufsize = roundup(IEEE80211_MAX_LEN, common->cachelsz); + common->rx_bufsize = roundup(IEEE80211_MAX_LEN, common->cachelsz); - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n", - common->cachelsz, sc->rxbufsize); + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n", + common->cachelsz, common->rx_bufsize); spin_lock_bh(&sc->rxbuflock); sc->rxlink = NULL; @@ -1769,6 +1773,8 @@ ath5k_tasklet_rx(unsigned long data) struct sk_buff *skb, *next_skb; dma_addr_t next_skb_addr; struct ath5k_softc *sc = (void *)data; + struct ath5k_hw *ah = sc->ah; + struct ath_common *common = ath5k_hw_common(ah); struct ath5k_buf *bf; struct ath5k_desc *ds; int ret; @@ -1846,7 +1852,7 @@ accept: if (!next_skb) goto next; - pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize, + pci_unmap_single(sc->pdev, bf->skbaddr, common->rx_bufsize, PCI_DMA_FROMDEVICE); skb_put(skb, rs.rs_datalen); diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 24f61fd..377b0ea 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -323,7 +323,6 @@ struct ath_rx { u8 defant; u8 rxotherant; u32 *rxlink; - int bufsize; unsigned int rxfilter; spinlock_t rxflushlock; spinlock_t rxbuflock; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 4420a58..48ff772 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -48,6 +48,7 @@ static struct ieee80211_hw * ath_get_virt_hw(struct ath_softc *sc, static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) { struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); struct ath_desc *ds; struct sk_buff *skb; @@ -62,11 +63,13 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) BUG_ON(skb == NULL); ds->ds_vdata = skb->data; - /* setup rx descriptors. The rx.bufsize here tells the harware + /* + * setup rx descriptors. The rx_bufsize here tells the hardware * how much data it can DMA to us and that we are prepared - * to process */ + * to process + */ ath9k_hw_setuprxdesc(ah, ds, - sc->rx.bufsize, + common->rx_bufsize, 0); if (sc->rx.rxlink == NULL) @@ -344,11 +347,11 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) sc->sc_flags &= ~SC_OP_RXFLUSH; spin_lock_init(&sc->rx.rxbuflock); - sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN, - min(common->cachelsz, (u16)64)); + common->rx_bufsize = roundup(IEEE80211_MAX_MPDU_LEN, + min(common->cachelsz, (u16)64)); ath_print(common, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n", - common->cachelsz, sc->rx.bufsize); + common->cachelsz, common->rx_bufsize); /* Initialize rx descriptors */ @@ -361,7 +364,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) } list_for_each_entry(bf, &sc->rx.rxbuf, list) { - skb = ath_rxbuf_alloc(common, sc->rx.bufsize, GFP_KERNEL); + skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_KERNEL); if (skb == NULL) { error = -ENOMEM; goto err; @@ -369,7 +372,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) bf->bf_mpdu = skb; bf->bf_buf_addr = dma_map_single(sc->dev, skb->data, - sc->rx.bufsize, + common->rx_bufsize, DMA_FROM_DEVICE); if (unlikely(dma_mapping_error(sc->dev, bf->bf_buf_addr))) { @@ -393,6 +396,8 @@ err: void ath_rx_cleanup(struct ath_softc *sc) { + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); struct sk_buff *skb; struct ath_buf *bf; @@ -400,7 +405,7 @@ void ath_rx_cleanup(struct ath_softc *sc) skb = bf->bf_mpdu; if (skb) { dma_unmap_single(sc->dev, bf->bf_buf_addr, - sc->rx.bufsize, DMA_FROM_DEVICE); + common->rx_bufsize, DMA_FROM_DEVICE); dev_kfree_skb(skb); } } @@ -780,7 +785,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) * 2. requeueing the same buffer to h/w */ dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr, - sc->rx.bufsize, + common->rx_bufsize, DMA_FROM_DEVICE); hdr = (struct ieee80211_hdr *) skb->data; @@ -797,7 +802,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) goto requeue; /* The status portion of the descriptor could get corrupted. */ - if (sc->rx.bufsize < rx_stats->rs_datalen) + if (common->rx_bufsize < rx_stats->rs_datalen) goto requeue; if (!ath_rx_prepare(common, hw, skb, rx_stats, @@ -806,7 +811,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) /* Ensure we always have an skb to requeue once we are done * processing the current buffer's skb */ - requeue_skb = ath_rxbuf_alloc(common, sc->rx.bufsize, GFP_ATOMIC); + requeue_skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_ATOMIC); /* If there is no memory we ignore the current RX'd frame, * tell hardware it can give us a new frame using the old @@ -817,7 +822,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) /* Unmap the frame */ dma_unmap_single(sc->dev, bf->bf_buf_addr, - sc->rx.bufsize, + common->rx_bufsize, DMA_FROM_DEVICE); skb_put(skb, rx_stats->rs_datalen); @@ -860,8 +865,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) /* We will now give hardware our shiny new allocated skb */ bf->bf_mpdu = requeue_skb; bf->bf_buf_addr = dma_map_single(sc->dev, requeue_skb->data, - sc->rx.bufsize, - DMA_FROM_DEVICE); + common->rx_bufsize, + DMA_FROM_DEVICE); if (unlikely(dma_mapping_error(sc->dev, bf->bf_buf_addr))) { dev_kfree_skb_any(requeue_skb); -- cgit v0.10.2 From dd849782a7388e091e356373a744f8b7ae97188a Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 4 Nov 2009 09:44:50 -0800 Subject: ath5k: remove double cache alignment, ath_rxbuf_alloc() already does it ath5k is using the (csz - 1) twice as ath_rxbuf_alloc() already allocates and moves skb->data accordingly. Remove the extra (csz -1). Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index f1a7c77..4cefd9e 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1184,12 +1184,12 @@ struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr) * fake physical layer header at the start. */ skb = ath_rxbuf_alloc(common, - common->rx_bufsize + common->cachelsz - 1, + common->rx_bufsize, GFP_ATOMIC); if (!skb) { ATH5K_ERR(sc, "can't alloc skbuff of size %u\n", - common->rx_bufsize + common->cachelsz - 1); + common->rx_bufsize); return NULL; } -- cgit v0.10.2 From 2c74aa4d73dbed2e879e7eb5ee9de95d40e5298d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 4 Nov 2009 15:11:05 -0800 Subject: ath9k: move the max rx buffer size check to ath9k_rx_accept() While at it flip the order, seems easier to read and also add some better description as to why we do this check. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 48ff772..16ed929 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -105,6 +105,13 @@ static bool ath9k_rx_accept(struct ath_common *common, if (!rx_stats->rs_datalen) return false; + /* + * rs_status follows rs_datalen so if rs_datalen is too large + * we can take a hint that hardware corrupted it, so ignore + * those frames. + */ + if (rx_stats->rs_datalen > common->rx_bufsize) + return false; if (rx_stats->rs_more) { /* @@ -801,10 +808,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) if (flush) goto requeue; - /* The status portion of the descriptor could get corrupted. */ - if (common->rx_bufsize < rx_stats->rs_datalen) - goto requeue; - if (!ath_rx_prepare(common, hw, skb, rx_stats, rxs, &decrypt_error)) goto requeue; -- cgit v0.10.2 From 1e875e9f16e3138d0e23cbf806a6d9520b622db2 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 4 Nov 2009 16:34:33 -0800 Subject: ath9k: rename ath_rx_prepare() to ath9k_rx_skb_preprocess() And change the return value to something more obvious. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 16ed929..c4a8663 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -288,16 +288,17 @@ static void ath9k_process_rssi(struct ath_common *common, * up the frame up to let mac80211 handle the actual error case, be it no * decryption key or real decryption error. This let us keep statistics there. */ -static int ath_rx_prepare(struct ath_common *common, - struct ieee80211_hw *hw, - struct sk_buff *skb, struct ath_rx_status *rx_stats, - struct ieee80211_rx_status *rx_status, - bool *decrypt_error) +static int ath9k_rx_skb_preprocess(struct ath_common *common, + struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rx_status, + bool *decrypt_error) { struct ath_hw *ah = common->ah; if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error)) - goto rx_next; + return -EINVAL; ath9k_process_rssi(common, hw, skb, rx_stats); @@ -312,8 +313,6 @@ static int ath_rx_prepare(struct ath_common *common, rx_status->qual = ath9k_compute_qual(hw, rx_stats); rx_status->flag |= RX_FLAG_TSFT; - return 1; -rx_next: return 0; } @@ -808,8 +807,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) if (flush) goto requeue; - if (!ath_rx_prepare(common, hw, skb, rx_stats, - rxs, &decrypt_error)) + retval = ath9k_rx_skb_preprocess(common, hw, skb, rx_stats, + rxs, &decrypt_error); + if (retval) goto requeue; /* Ensure we always have an skb to requeue once we are done -- cgit v0.10.2 From 7e86c1048a9f5f1e157daf28411f3526f0b9f7b6 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 4 Nov 2009 17:21:01 -0800 Subject: ath9k: move driver keymap, keymax and splitmic to common This will make sharing code easier between ath9k and ath9k_htc. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h index 4af1362..9e05648 100644 --- a/drivers/net/wireless/ath/ath.h +++ b/drivers/net/wireless/ath/ath.h @@ -21,6 +21,16 @@ #include #include +/* + * The key cache is used for h/w cipher state and also for + * tracking station state such as the current tx antenna. + * We also setup a mapping table between key cache slot indices + * and station state to short-circuit node lookups on rx. + * Different parts have different size key caches. We handle + * up to ATH_KEYMAX entries (could dynamically allocate state). + */ +#define ATH_KEYMAX 128 /* max key cache size we handle */ + static const u8 ath_bcast_mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; struct ath_ani { @@ -89,6 +99,10 @@ struct ath_common { u32 rx_bufsize; + u32 keymax; + DECLARE_BITMAP(keymap, ATH_KEYMAX); + u8 splitmic; + struct ath_regulatory regulatory; const struct ath_ops *ops; const struct ath_bus_ops *bus_ops; diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 377b0ea..88969cb 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -492,16 +492,6 @@ struct ath_led { #define ATH_CHAN_MAX 255 #define IEEE80211_WEP_NKID 4 /* number of key ids */ -/* - * The key cache is used for h/w cipher state and also for - * tracking station state such as the current tx antenna. - * We also setup a mapping table between key cache slot indices - * and station state to short-circuit node lookups on rx. - * Different parts have different size key caches. We handle - * up to ATH_KEYMAX entries (could dynamically allocate state). - */ -#define ATH_KEYMAX 128 /* max key cache size we handle */ - #define ATH_TXPOWER_MAX 100 /* .5 dBm units */ #define ATH_RSSI_DUMMY_MARKER 0x127 #define ATH_RATE_DUMMY_MARKER 0 @@ -562,9 +552,6 @@ struct ath_softc { u16 curtxpow; u8 nbcnvifs; u16 nvifs; - u32 keymax; - DECLARE_BITMAP(keymap, ATH_KEYMAX); - u8 splitmic; bool ps_enabled; unsigned long ps_usecount; enum ath9k_int imask; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 01ac897..3c02b97 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -733,10 +733,11 @@ static u32 ath_get_extchanmode(struct ath_softc *sc, return chanmode; } -static int ath_setkey_tkip(struct ath_softc *sc, u16 keyix, const u8 *key, +static int ath_setkey_tkip(struct ath_common *common, u16 keyix, const u8 *key, struct ath9k_keyval *hk, const u8 *addr, bool authenticator) { + struct ath_hw *ah = common->ah; const u8 *key_rxmic; const u8 *key_txmic; @@ -756,42 +757,42 @@ static int ath_setkey_tkip(struct ath_softc *sc, u16 keyix, const u8 *key, memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic)); memcpy(hk->kv_txmic, key_rxmic, sizeof(hk->kv_mic)); } - return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr); + return ath9k_hw_set_keycache_entry(ah, keyix, hk, addr); } - if (!sc->splitmic) { + if (!common->splitmic) { /* TX and RX keys share the same key cache entry. */ memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic)); memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic)); - return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr); + return ath9k_hw_set_keycache_entry(ah, keyix, hk, addr); } /* Separate key cache entries for TX and RX */ /* TX key goes at first index, RX key at +32. */ memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic)); - if (!ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, NULL)) { + if (!ath9k_hw_set_keycache_entry(ah, keyix, hk, NULL)) { /* TX MIC entry failed. No need to proceed further */ - ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL, + ath_print(common, ATH_DBG_FATAL, "Setting TX MIC Key Failed\n"); return 0; } memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic)); /* XXX delete tx key on failure? */ - return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix + 32, hk, addr); + return ath9k_hw_set_keycache_entry(ah, keyix + 32, hk, addr); } -static int ath_reserve_key_cache_slot_tkip(struct ath_softc *sc) +static int ath_reserve_key_cache_slot_tkip(struct ath_common *common) { int i; - for (i = IEEE80211_WEP_NKID; i < sc->keymax / 2; i++) { - if (test_bit(i, sc->keymap) || - test_bit(i + 64, sc->keymap)) + for (i = IEEE80211_WEP_NKID; i < common->keymax / 2; i++) { + if (test_bit(i, common->keymap) || + test_bit(i + 64, common->keymap)) continue; /* At least one part of TKIP key allocated */ - if (sc->splitmic && - (test_bit(i + 32, sc->keymap) || - test_bit(i + 64 + 32, sc->keymap))) + if (common->splitmic && + (test_bit(i + 32, common->keymap) || + test_bit(i + 64 + 32, common->keymap))) continue; /* At least one part of TKIP key allocated */ /* Found a free slot for a TKIP key */ @@ -800,60 +801,60 @@ static int ath_reserve_key_cache_slot_tkip(struct ath_softc *sc) return -1; } -static int ath_reserve_key_cache_slot(struct ath_softc *sc) +static int ath_reserve_key_cache_slot(struct ath_common *common) { int i; /* First, try to find slots that would not be available for TKIP. */ - if (sc->splitmic) { - for (i = IEEE80211_WEP_NKID; i < sc->keymax / 4; i++) { - if (!test_bit(i, sc->keymap) && - (test_bit(i + 32, sc->keymap) || - test_bit(i + 64, sc->keymap) || - test_bit(i + 64 + 32, sc->keymap))) + if (common->splitmic) { + for (i = IEEE80211_WEP_NKID; i < common->keymax / 4; i++) { + if (!test_bit(i, common->keymap) && + (test_bit(i + 32, common->keymap) || + test_bit(i + 64, common->keymap) || + test_bit(i + 64 + 32, common->keymap))) return i; - if (!test_bit(i + 32, sc->keymap) && - (test_bit(i, sc->keymap) || - test_bit(i + 64, sc->keymap) || - test_bit(i + 64 + 32, sc->keymap))) + if (!test_bit(i + 32, common->keymap) && + (test_bit(i, common->keymap) || + test_bit(i + 64, common->keymap) || + test_bit(i + 64 + 32, common->keymap))) return i + 32; - if (!test_bit(i + 64, sc->keymap) && - (test_bit(i , sc->keymap) || - test_bit(i + 32, sc->keymap) || - test_bit(i + 64 + 32, sc->keymap))) + if (!test_bit(i + 64, common->keymap) && + (test_bit(i , common->keymap) || + test_bit(i + 32, common->keymap) || + test_bit(i + 64 + 32, common->keymap))) return i + 64; - if (!test_bit(i + 64 + 32, sc->keymap) && - (test_bit(i, sc->keymap) || - test_bit(i + 32, sc->keymap) || - test_bit(i + 64, sc->keymap))) + if (!test_bit(i + 64 + 32, common->keymap) && + (test_bit(i, common->keymap) || + test_bit(i + 32, common->keymap) || + test_bit(i + 64, common->keymap))) return i + 64 + 32; } } else { - for (i = IEEE80211_WEP_NKID; i < sc->keymax / 2; i++) { - if (!test_bit(i, sc->keymap) && - test_bit(i + 64, sc->keymap)) + for (i = IEEE80211_WEP_NKID; i < common->keymax / 2; i++) { + if (!test_bit(i, common->keymap) && + test_bit(i + 64, common->keymap)) return i; - if (test_bit(i, sc->keymap) && - !test_bit(i + 64, sc->keymap)) + if (test_bit(i, common->keymap) && + !test_bit(i + 64, common->keymap)) return i + 64; } } /* No partially used TKIP slots, pick any available slot */ - for (i = IEEE80211_WEP_NKID; i < sc->keymax; i++) { + for (i = IEEE80211_WEP_NKID; i < common->keymax; i++) { /* Do not allow slots that could be needed for TKIP group keys * to be used. This limitation could be removed if we know that * TKIP will not be used. */ if (i >= 64 && i < 64 + IEEE80211_WEP_NKID) continue; - if (sc->splitmic) { + if (common->splitmic) { if (i >= 32 && i < 32 + IEEE80211_WEP_NKID) continue; if (i >= 64 + 32 && i < 64 + 32 + IEEE80211_WEP_NKID) continue; } - if (!test_bit(i, sc->keymap)) + if (!test_bit(i, common->keymap)) return i; /* Found a free slot for a key */ } @@ -861,11 +862,12 @@ static int ath_reserve_key_cache_slot(struct ath_softc *sc) return -1; } -static int ath_key_config(struct ath_softc *sc, +static int ath_key_config(struct ath_common *common, struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct ieee80211_key_conf *key) { + struct ath_hw *ah = common->ah; struct ath9k_keyval hk; const u8 *mac = NULL; int ret = 0; @@ -911,48 +913,50 @@ static int ath_key_config(struct ath_softc *sc, mac = sta->addr; if (key->alg == ALG_TKIP) - idx = ath_reserve_key_cache_slot_tkip(sc); + idx = ath_reserve_key_cache_slot_tkip(common); else - idx = ath_reserve_key_cache_slot(sc); + idx = ath_reserve_key_cache_slot(common); if (idx < 0) return -ENOSPC; /* no free key cache entries */ } if (key->alg == ALG_TKIP) - ret = ath_setkey_tkip(sc, idx, key->key, &hk, mac, + ret = ath_setkey_tkip(common, idx, key->key, &hk, mac, vif->type == NL80211_IFTYPE_AP); else - ret = ath9k_hw_set_keycache_entry(sc->sc_ah, idx, &hk, mac); + ret = ath9k_hw_set_keycache_entry(ah, idx, &hk, mac); if (!ret) return -EIO; - set_bit(idx, sc->keymap); + set_bit(idx, common->keymap); if (key->alg == ALG_TKIP) { - set_bit(idx + 64, sc->keymap); - if (sc->splitmic) { - set_bit(idx + 32, sc->keymap); - set_bit(idx + 64 + 32, sc->keymap); + set_bit(idx + 64, common->keymap); + if (common->splitmic) { + set_bit(idx + 32, common->keymap); + set_bit(idx + 64 + 32, common->keymap); } } return idx; } -static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key) +static void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf *key) { - ath9k_hw_keyreset(sc->sc_ah, key->hw_key_idx); + struct ath_hw *ah = common->ah; + + ath9k_hw_keyreset(ah, key->hw_key_idx); if (key->hw_key_idx < IEEE80211_WEP_NKID) return; - clear_bit(key->hw_key_idx, sc->keymap); + clear_bit(key->hw_key_idx, common->keymap); if (key->alg != ALG_TKIP) return; - clear_bit(key->hw_key_idx + 64, sc->keymap); - if (sc->splitmic) { - clear_bit(key->hw_key_idx + 32, sc->keymap); - clear_bit(key->hw_key_idx + 64 + 32, sc->keymap); + clear_bit(key->hw_key_idx + 64, common->keymap); + if (common->splitmic) { + clear_bit(key->hw_key_idx + 32, common->keymap); + clear_bit(key->hw_key_idx + 64 + 32, common->keymap); } } @@ -1679,19 +1683,19 @@ static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid, } /* Get the hardware key cache size. */ - sc->keymax = ah->caps.keycache_size; - if (sc->keymax > ATH_KEYMAX) { + common->keymax = ah->caps.keycache_size; + if (common->keymax > ATH_KEYMAX) { ath_print(common, ATH_DBG_ANY, "Warning, using only %u entries in %u key cache\n", - ATH_KEYMAX, sc->keymax); - sc->keymax = ATH_KEYMAX; + ATH_KEYMAX, common->keymax); + common->keymax = ATH_KEYMAX; } /* * Reset the key cache since some parts do not * reset the contents on initial power up. */ - for (i = 0; i < sc->keymax; i++) + for (i = 0; i < common->keymax; i++) ath9k_hw_keyreset(ah, (u16) i); /* default to MONITOR mode */ @@ -1788,7 +1792,7 @@ static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid, ATH9K_CIPHER_MIC, NULL) && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT, 0, NULL)) - sc->splitmic = 1; + common->splitmic = 1; /* turn on mcast key search if possible */ if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL)) @@ -2917,7 +2921,7 @@ static int ath9k_set_key(struct ieee80211_hw *hw, switch (cmd) { case SET_KEY: - ret = ath_key_config(sc, vif, sta, key); + ret = ath_key_config(common, vif, sta, key); if (ret >= 0) { key->hw_key_idx = ret; /* push IV and Michael MIC generation to stack */ @@ -2930,7 +2934,7 @@ static int ath9k_set_key(struct ieee80211_hw *hw, } break; case DISABLE_KEY: - ath_key_delete(sc, key); + ath_key_delete(common, key); break; default: ret = -EINVAL; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index c4a8663..3abefb5 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -856,7 +856,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) && !decrypt_error && skb->len >= hdrlen + 4) { keyix = skb->data[hdrlen + 3] >> 6; - if (test_bit(keyix, sc->keymap)) + if (test_bit(keyix, common->keymap)) rxs->flag |= RX_FLAG_DECRYPTED; } if (ah->sw_mgmt_crypto && -- cgit v0.10.2 From dc1e001bf498a19dcb46676d933cd0e92dc53ef3 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 4 Nov 2009 17:47:31 -0800 Subject: ath5k: use the common->keymap Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 4cefd9e..a4c086f 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1683,6 +1683,8 @@ static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds, struct sk_buff *skb, struct ath5k_rx_status *rs) { + struct ath5k_hw *ah = sc->ah; + struct ath_common *common = ath5k_hw_common(ah); struct ieee80211_hdr *hdr = (void *)skb->data; unsigned int keyix, hlen; @@ -1699,7 +1701,7 @@ ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds, skb->len >= hlen + 4) { keyix = skb->data[hlen + 3] >> 6; - if (test_bit(keyix, sc->keymap)) + if (test_bit(keyix, common->keymap)) return RX_FLAG_DECRYPTED; } @@ -3038,6 +3040,8 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, struct ieee80211_key_conf *key) { struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + struct ath_common *common = ath5k_hw_common(ah); int ret = 0; if (modparam_nohwcrypt) @@ -3070,14 +3074,14 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, ATH5K_ERR(sc, "can't set the key\n"); goto unlock; } - __set_bit(key->keyidx, sc->keymap); + __set_bit(key->keyidx, common->keymap); key->hw_key_idx = key->keyidx; key->flags |= (IEEE80211_KEY_FLAG_GENERATE_IV | IEEE80211_KEY_FLAG_GENERATE_MMIC); break; case DISABLE_KEY: ath5k_hw_reset_key(sc->ah, key->keyidx); - __clear_bit(key->keyidx, sc->keymap); + __clear_bit(key->keyidx, common->keymap); break; default: ret = -EINVAL; diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h index b14ba07..b72338c 100644 --- a/drivers/net/wireless/ath/ath5k/base.h +++ b/drivers/net/wireless/ath/ath5k/base.h @@ -153,8 +153,6 @@ struct ath5k_softc { enum ath5k_int imask; /* interrupt mask copy */ - DECLARE_BITMAP(keymap, AR5K_KEYCACHE_SIZE); /* key use bit map */ - u8 bssidmask[ETH_ALEN]; unsigned int led_pin, /* GPIO pin for driving LED */ -- cgit v0.10.2 From c9b1417055cd2518e8a3b4b27e1f8e4b72821dff Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 4 Nov 2009 16:47:22 -0800 Subject: ath9k: move RX skb post processing to a helper Use a helper for the RX skb post processing, ath9k_rx_skb_postprocess(). Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 3abefb5..8b7489d 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -316,6 +316,55 @@ static int ath9k_rx_skb_preprocess(struct ath_common *common, return 0; } +static void ath9k_rx_skb_postprocess(struct ath_common *common, + struct sk_buff *skb, + struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rxs, + bool decrypt_error) +{ + struct ath_hw *ah = common->ah; + struct ieee80211_hdr *hdr; + int hdrlen, padsize; + u8 keyix; + __le16 fc; + + /* see if any padding is done by the hw and remove it */ + hdr = (struct ieee80211_hdr *) skb->data; + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + fc = hdr->frame_control; + + /* The MAC header is padded to have 32-bit boundary if the + * packet payload is non-zero. The general calculation for + * padsize would take into account odd header lengths: + * padsize = (4 - hdrlen % 4) % 4; However, since only + * even-length headers are used, padding can only be 0 or 2 + * bytes and we can optimize this a bit. In addition, we must + * not try to remove padding from short control frames that do + * not have payload. */ + padsize = hdrlen & 3; + if (padsize && hdrlen >= 24) { + memmove(skb->data + padsize, skb->data, hdrlen); + skb_pull(skb, padsize); + } + + keyix = rx_stats->rs_keyix; + + if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) { + rxs->flag |= RX_FLAG_DECRYPTED; + } else if (ieee80211_has_protected(fc) + && !decrypt_error && skb->len >= hdrlen + 4) { + keyix = skb->data[hdrlen + 3] >> 6; + + if (test_bit(keyix, common->keymap)) + rxs->flag |= RX_FLAG_DECRYPTED; + } + if (ah->sw_mgmt_crypto && + (rxs->flag & RX_FLAG_DECRYPTED) && + ieee80211_is_mgmt(fc)) + /* Use software decrypt for management frames. */ + rxs->flag &= ~RX_FLAG_DECRYPTED; +} + static void ath_opmode_init(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; @@ -716,10 +765,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) */ struct ieee80211_hw *hw = NULL; struct ieee80211_hdr *hdr; - int hdrlen, padsize, retval; + int retval; bool decrypt_error = false; - u8 keyix; - __le16 fc; spin_lock_bh(&sc->rx.rxbuflock); @@ -830,40 +877,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) skb_put(skb, rx_stats->rs_datalen); - /* see if any padding is done by the hw and remove it */ - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - fc = hdr->frame_control; - - /* The MAC header is padded to have 32-bit boundary if the - * packet payload is non-zero. The general calculation for - * padsize would take into account odd header lengths: - * padsize = (4 - hdrlen % 4) % 4; However, since only - * even-length headers are used, padding can only be 0 or 2 - * bytes and we can optimize this a bit. In addition, we must - * not try to remove padding from short control frames that do - * not have payload. */ - padsize = hdrlen & 3; - if (padsize && hdrlen >= 24) { - memmove(skb->data + padsize, skb->data, hdrlen); - skb_pull(skb, padsize); - } - - keyix = rx_stats->rs_keyix; - - if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) { - rxs->flag |= RX_FLAG_DECRYPTED; - } else if (ieee80211_has_protected(fc) - && !decrypt_error && skb->len >= hdrlen + 4) { - keyix = skb->data[hdrlen + 3] >> 6; - - if (test_bit(keyix, common->keymap)) - rxs->flag |= RX_FLAG_DECRYPTED; - } - if (ah->sw_mgmt_crypto && - (rxs->flag & RX_FLAG_DECRYPTED) && - ieee80211_is_mgmt(fc)) - /* Use software decrypt for management frames. */ - rxs->flag &= ~RX_FLAG_DECRYPTED; + ath9k_rx_skb_postprocess(common, skb, rx_stats, + rxs, decrypt_error); /* We will now give hardware our shiny new allocated skb */ bf->bf_mpdu = requeue_skb; -- cgit v0.10.2 From db86f07ec6cdea9670a0928bd1289109d2a989dc Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 5 Nov 2009 08:44:39 -0800 Subject: ath9k_common: add new module to share 802.11n driver helpers ath9k and ath9k_htc share a lot of common hardware characteristics. They only differ in that ath9k_htc works with a target CPU and ath9k works directly with the hardware. ath9k_htc will do *some* things in the firmware, but a lot of others on the host. The common 802.11n hardware code is already shared through the ath9k_hw module. Common helpers amongst all Atheros drivers can use the ath module, this includes ath5k and ar9170 as users. But there is some common driver specific helpers which are not exactly hardware code which ath9k and ath9k_htc can share. We'll be using ath9k_common for this to avoid bloating the ath module and the common 802.11n hardware module ath9k_hw. We start by sharing skb pre and post processing in preparation for a hand off to mac80211. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index b735fb3..006364f 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -1,5 +1,7 @@ config ATH9K_HW tristate +config ATH9K_COMMON + tristate config ATH9K tristate "Atheros 802.11n wireless cards support" @@ -8,6 +10,7 @@ config ATH9K select MAC80211_LEDS select LEDS_CLASS select NEW_LEDS + select ATH9K_COMMON ---help--- This module adds support for wireless adapters based on Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile index 8caf2a8..e53f9680 100644 --- a/drivers/net/wireless/ath/ath9k/Makefile +++ b/drivers/net/wireless/ath/ath9k/Makefile @@ -23,3 +23,6 @@ ath9k_hw-y:= hw.o \ mac.o \ obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o + +obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o +ath9k_common-y:= common.o diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 88969cb..d9bcc3a 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -19,14 +19,16 @@ #include #include -#include #include -#include "hw.h" #include "rc.h" #include "debug.h" -#include "../ath.h" -#include "../debug.h" +#include "common.h" + +/* + * Header for the ath9k.ko driver core *only* -- hw code nor any other driver + * should rely on this file or its contents. + */ struct ath_node; @@ -99,18 +101,6 @@ enum buffer_type { BUF_XRETRY = BIT(5), }; -struct ath_buf_state { - int bfs_nframes; - u16 bfs_al; - u16 bfs_frmlen; - int bfs_seqno; - int bfs_tidno; - int bfs_retries; - u8 bf_type; - u32 bfs_keyix; - enum ath9k_key_type bfs_keytype; -}; - #define bf_nframes bf_state.bfs_nframes #define bf_al bf_state.bfs_al #define bf_frmlen bf_state.bfs_frmlen @@ -125,21 +115,6 @@ struct ath_buf_state { #define bf_isretried(bf) (bf->bf_state.bf_type & BUF_RETRY) #define bf_isxretried(bf) (bf->bf_state.bf_type & BUF_XRETRY) -struct ath_buf { - struct list_head list; - struct ath_buf *bf_lastbf; /* last buf of this unit (a frame or - an aggregate) */ - struct ath_buf *bf_next; /* next subframe in the aggregate */ - struct sk_buff *bf_mpdu; /* enclosing frame structure */ - struct ath_desc *bf_desc; /* virtual addr of desc */ - dma_addr_t bf_daddr; /* physical addr of desc */ - dma_addr_t bf_buf_addr; /* physical addr of data buffer */ - bool bf_stale; - u16 bf_flags; - struct ath_buf_state bf_state; - dma_addr_t bf_dmacontext; -}; - struct ath_descdma { struct ath_desc *dd_desc; dma_addr_t dd_desc_paddr; @@ -159,13 +134,9 @@ void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd, #define ATH_MAX_ANTENNA 3 #define ATH_RXBUF 512 -#define WME_NUM_TID 16 #define ATH_TXBUF 512 #define ATH_TXMAXTRY 13 #define ATH_MGT_TXMAXTRY 4 -#define WME_BA_BMP_SIZE 64 -#define WME_MAX_BA WME_BA_BMP_SIZE -#define ATH_TID_MAX_BUFS (2 * WME_MAX_BA) #define TID_TO_WME_AC(_tid) \ ((((_tid) == 0) || ((_tid) == 3)) ? WME_AC_BE : \ @@ -173,12 +144,6 @@ void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd, (((_tid) == 4) || ((_tid) == 5)) ? WME_AC_VI : \ WME_AC_VO) -#define WME_AC_BE 0 -#define WME_AC_BK 1 -#define WME_AC_VI 2 -#define WME_AC_VO 3 -#define WME_NUM_AC 4 - #define ADDBA_EXCHANGE_ATTEMPTS 10 #define ATH_AGGR_DELIM_SZ 4 #define ATH_AGGR_MINPLEN 256 /* in bytes, minimum packet length */ @@ -252,30 +217,6 @@ struct ath_txq { #define AGGR_ADDBA_COMPLETE BIT(2) #define AGGR_ADDBA_PROGRESS BIT(3) -struct ath_atx_tid { - struct list_head list; - struct list_head buf_q; - struct ath_node *an; - struct ath_atx_ac *ac; - struct ath_buf *tx_buf[ATH_TID_MAX_BUFS]; - u16 seq_start; - u16 seq_next; - u16 baw_size; - int tidno; - int baw_head; /* first un-acked tx buffer */ - int baw_tail; /* next unused tx buffer slot */ - int sched; - int paused; - u8 state; -}; - -struct ath_atx_ac { - int sched; - int qnum; - struct list_head list; - struct list_head tid_q; -}; - struct ath_tx_control { struct ath_txq *txq; int if_id; @@ -286,29 +227,6 @@ struct ath_tx_control { #define ATH_TX_XRETRY 0x02 #define ATH_TX_BAR 0x04 -#define ATH_RSSI_LPF_LEN 10 -#define RSSI_LPF_THRESHOLD -20 -#define ATH_RSSI_EP_MULTIPLIER (1<<7) -#define ATH_EP_MUL(x, mul) ((x) * (mul)) -#define ATH_RSSI_IN(x) (ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER)) -#define ATH_LPF_RSSI(x, y, len) \ - ((x != ATH_RSSI_DUMMY_MARKER) ? (((x) * ((len) - 1) + (y)) / (len)) : (y)) -#define ATH_RSSI_LPF(x, y) do { \ - if ((y) >= RSSI_LPF_THRESHOLD) \ - x = ATH_LPF_RSSI((x), ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN); \ -} while (0) -#define ATH_EP_RND(x, mul) \ - ((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul)) - -struct ath_node { - struct ath_softc *an_sc; - struct ath_atx_tid tid[WME_NUM_TID]; - struct ath_atx_ac ac[WME_NUM_AC]; - u16 maxampdu; - u8 mpdudensity; - int last_rssi; -}; - struct ath_tx { u16 seq_no; u32 txqsetup; @@ -493,7 +411,6 @@ struct ath_led { #define IEEE80211_WEP_NKID 4 /* number of key ids */ #define ATH_TXPOWER_MAX 100 /* .5 dBm units */ -#define ATH_RSSI_DUMMY_MARKER 0x127 #define ATH_RATE_DUMMY_MARKER 0 #define SC_OP_INVALID BIT(0) diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c new file mode 100644 index 0000000..5fb164e --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/common.c @@ -0,0 +1,326 @@ +/* + * Copyright (c) 2009 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/* + * Module for common driver code between ath9k and ath9k_htc + */ + +#include +#include + +#include "common.h" + +MODULE_AUTHOR("Atheros Communications"); +MODULE_DESCRIPTION("Shared library for Atheros wireless 802.11n LAN cards."); +MODULE_LICENSE("Dual BSD/GPL"); + +/* Common RX processing */ + +/* Assumes you've already done the endian to CPU conversion */ +static bool ath9k_rx_accept(struct ath_common *common, + struct sk_buff *skb, + struct ieee80211_rx_status *rxs, + struct ath_rx_status *rx_stats, + bool *decrypt_error) +{ + struct ath_hw *ah = common->ah; + struct ieee80211_hdr *hdr; + __le16 fc; + + hdr = (struct ieee80211_hdr *) skb->data; + fc = hdr->frame_control; + + if (!rx_stats->rs_datalen) + return false; + /* + * rs_status follows rs_datalen so if rs_datalen is too large + * we can take a hint that hardware corrupted it, so ignore + * those frames. + */ + if (rx_stats->rs_datalen > common->rx_bufsize) + return false; + + if (rx_stats->rs_more) { + /* + * Frame spans multiple descriptors; this cannot happen yet + * as we don't support jumbograms. If not in monitor mode, + * discard the frame. Enable this if you want to see + * error frames in Monitor mode. + */ + if (ah->opmode != NL80211_IFTYPE_MONITOR) + return false; + } else if (rx_stats->rs_status != 0) { + if (rx_stats->rs_status & ATH9K_RXERR_CRC) + rxs->flag |= RX_FLAG_FAILED_FCS_CRC; + if (rx_stats->rs_status & ATH9K_RXERR_PHY) + return false; + + if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) { + *decrypt_error = true; + } else if (rx_stats->rs_status & ATH9K_RXERR_MIC) { + if (ieee80211_is_ctl(fc)) + /* + * Sometimes, we get invalid + * MIC failures on valid control frames. + * Remove these mic errors. + */ + rx_stats->rs_status &= ~ATH9K_RXERR_MIC; + else + rxs->flag |= RX_FLAG_MMIC_ERROR; + } + /* + * Reject error frames with the exception of + * decryption and MIC failures. For monitor mode, + * we also ignore the CRC error. + */ + if (ah->opmode == NL80211_IFTYPE_MONITOR) { + if (rx_stats->rs_status & + ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | + ATH9K_RXERR_CRC)) + return false; + } else { + if (rx_stats->rs_status & + ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) { + return false; + } + } + } + return true; +} + +static u8 ath9k_process_rate(struct ath_common *common, + struct ieee80211_hw *hw, + struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rxs, + struct sk_buff *skb) +{ + struct ieee80211_supported_band *sband; + enum ieee80211_band band; + unsigned int i = 0; + + band = hw->conf.channel->band; + sband = hw->wiphy->bands[band]; + + if (rx_stats->rs_rate & 0x80) { + /* HT rate */ + rxs->flag |= RX_FLAG_HT; + if (rx_stats->rs_flags & ATH9K_RX_2040) + rxs->flag |= RX_FLAG_40MHZ; + if (rx_stats->rs_flags & ATH9K_RX_GI) + rxs->flag |= RX_FLAG_SHORT_GI; + return rx_stats->rs_rate & 0x7f; + } + + for (i = 0; i < sband->n_bitrates; i++) { + if (sband->bitrates[i].hw_value == rx_stats->rs_rate) + return i; + if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) { + rxs->flag |= RX_FLAG_SHORTPRE; + return i; + } + } + + /* No valid hardware bitrate found -- we should not get here */ + ath_print(common, ATH_DBG_XMIT, "unsupported hw bitrate detected " + "0x%02x using 1 Mbit\n", rx_stats->rs_rate); + if ((common->debug_mask & ATH_DBG_XMIT)) + print_hex_dump_bytes("", DUMP_PREFIX_NONE, skb->data, skb->len); + + return 0; +} + +/* + * Theory for reporting quality: + * + * At a hardware RSSI of 45 you will be able to use MCS 7 reliably. + * At a hardware RSSI of 45 you will be able to use MCS 15 reliably. + * At a hardware RSSI of 35 you should be able use 54 Mbps reliably. + * + * MCS 7 is the highets MCS index usable by a 1-stream device. + * MCS 15 is the highest MCS index usable by a 2-stream device. + * + * All ath9k devices are either 1-stream or 2-stream. + * + * How many bars you see is derived from the qual reporting. + * + * A more elaborate scheme can be used here but it requires tables + * of SNR/throughput for each possible mode used. For the MCS table + * you can refer to the wireless wiki: + * + * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n + * + */ +static int ath9k_compute_qual(struct ieee80211_hw *hw, + struct ath_rx_status *rx_stats) +{ + int qual; + + if (conf_is_ht(&hw->conf)) + qual = rx_stats->rs_rssi * 100 / 45; + else + qual = rx_stats->rs_rssi * 100 / 35; + + /* + * rssi can be more than 45 though, anything above that + * should be considered at 100% + */ + if (qual > 100) + qual = 100; + + return qual; +} + +static void ath9k_process_rssi(struct ath_common *common, + struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ath_rx_status *rx_stats) +{ + struct ath_hw *ah = common->ah; + struct ieee80211_sta *sta; + struct ieee80211_hdr *hdr; + struct ath_node *an; + int last_rssi = ATH_RSSI_DUMMY_MARKER; + __le16 fc; + + hdr = (struct ieee80211_hdr *)skb->data; + fc = hdr->frame_control; + + rcu_read_lock(); + /* + * XXX: use ieee80211_find_sta! This requires quite a bit of work + * under the current ath9k virtual wiphy implementation as we have + * no way of tying a vif to wiphy. Typically vifs are attached to + * at least one sdata of a wiphy on mac80211 but with ath9k virtual + * wiphy you'd have to iterate over every wiphy and each sdata. + */ + sta = ieee80211_find_sta_by_hw(hw, hdr->addr2); + if (sta) { + an = (struct ath_node *) sta->drv_priv; + if (rx_stats->rs_rssi != ATH9K_RSSI_BAD && + !rx_stats->rs_moreaggr) + ATH_RSSI_LPF(an->last_rssi, rx_stats->rs_rssi); + last_rssi = an->last_rssi; + } + rcu_read_unlock(); + + if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER)) + rx_stats->rs_rssi = ATH_EP_RND(last_rssi, + ATH_RSSI_EP_MULTIPLIER); + if (rx_stats->rs_rssi < 0) + rx_stats->rs_rssi = 0; + else if (rx_stats->rs_rssi > 127) + rx_stats->rs_rssi = 127; + + /* Update Beacon RSSI, this is used by ANI. */ + if (ieee80211_is_beacon(fc)) + ah->stats.avgbrssi = rx_stats->rs_rssi; +} + +/* + * For Decrypt or Demic errors, we only mark packet status here and always push + * up the frame up to let mac80211 handle the actual error case, be it no + * decryption key or real decryption error. This let us keep statistics there. + */ +int ath9k_cmn_rx_skb_preprocess(struct ath_common *common, + struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rx_status, + bool *decrypt_error) +{ + struct ath_hw *ah = common->ah; + + if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error)) + return -EINVAL; + + ath9k_process_rssi(common, hw, skb, rx_stats); + + rx_status->rate_idx = ath9k_process_rate(common, hw, + rx_stats, rx_status, skb); + rx_status->mactime = ath9k_hw_extend_tsf(ah, rx_stats->rs_tstamp); + rx_status->band = hw->conf.channel->band; + rx_status->freq = hw->conf.channel->center_freq; + rx_status->noise = common->ani.noise_floor; + rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + rx_stats->rs_rssi; + rx_status->antenna = rx_stats->rs_antenna; + rx_status->qual = ath9k_compute_qual(hw, rx_stats); + rx_status->flag |= RX_FLAG_TSFT; + + return 0; +} +EXPORT_SYMBOL(ath9k_cmn_rx_skb_preprocess); + +void ath9k_cmn_rx_skb_postprocess(struct ath_common *common, + struct sk_buff *skb, + struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rxs, + bool decrypt_error) +{ + struct ath_hw *ah = common->ah; + struct ieee80211_hdr *hdr; + int hdrlen, padsize; + u8 keyix; + __le16 fc; + + /* see if any padding is done by the hw and remove it */ + hdr = (struct ieee80211_hdr *) skb->data; + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + fc = hdr->frame_control; + + /* The MAC header is padded to have 32-bit boundary if the + * packet payload is non-zero. The general calculation for + * padsize would take into account odd header lengths: + * padsize = (4 - hdrlen % 4) % 4; However, since only + * even-length headers are used, padding can only be 0 or 2 + * bytes and we can optimize this a bit. In addition, we must + * not try to remove padding from short control frames that do + * not have payload. */ + padsize = hdrlen & 3; + if (padsize && hdrlen >= 24) { + memmove(skb->data + padsize, skb->data, hdrlen); + skb_pull(skb, padsize); + } + + keyix = rx_stats->rs_keyix; + + if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) { + rxs->flag |= RX_FLAG_DECRYPTED; + } else if (ieee80211_has_protected(fc) + && !decrypt_error && skb->len >= hdrlen + 4) { + keyix = skb->data[hdrlen + 3] >> 6; + + if (test_bit(keyix, common->keymap)) + rxs->flag |= RX_FLAG_DECRYPTED; + } + if (ah->sw_mgmt_crypto && + (rxs->flag & RX_FLAG_DECRYPTED) && + ieee80211_is_mgmt(fc)) + /* Use software decrypt for management frames. */ + rxs->flag &= ~RX_FLAG_DECRYPTED; +} +EXPORT_SYMBOL(ath9k_cmn_rx_skb_postprocess); + +static int __init ath9k_cmn_init(void) +{ + return 0; +} +module_init(ath9k_cmn_init); + +static void __exit ath9k_cmn_exit(void) +{ + return; +} +module_exit(ath9k_cmn_exit); diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h new file mode 100644 index 0000000..292e3d8 --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/common.h @@ -0,0 +1,123 @@ +/* + * Copyright (c) 2009 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include + +#include "../ath.h" +#include "../debug.h" + +#include "hw.h" + +/* Common header for Atheros 802.11n base driver cores */ + +#define WME_NUM_TID 16 +#define WME_BA_BMP_SIZE 64 +#define WME_MAX_BA WME_BA_BMP_SIZE +#define ATH_TID_MAX_BUFS (2 * WME_MAX_BA) + +#define WME_AC_BE 0 +#define WME_AC_BK 1 +#define WME_AC_VI 2 +#define WME_AC_VO 3 +#define WME_NUM_AC 4 + +#define ATH_RSSI_DUMMY_MARKER 0x127 +#define ATH_RSSI_LPF_LEN 10 +#define RSSI_LPF_THRESHOLD -20 +#define ATH_RSSI_EP_MULTIPLIER (1<<7) +#define ATH_EP_MUL(x, mul) ((x) * (mul)) +#define ATH_RSSI_IN(x) (ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER)) +#define ATH_LPF_RSSI(x, y, len) \ + ((x != ATH_RSSI_DUMMY_MARKER) ? (((x) * ((len) - 1) + (y)) / (len)) : (y)) +#define ATH_RSSI_LPF(x, y) do { \ + if ((y) >= RSSI_LPF_THRESHOLD) \ + x = ATH_LPF_RSSI((x), ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN); \ +} while (0) +#define ATH_EP_RND(x, mul) \ + ((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul)) + +struct ath_atx_ac { + int sched; + int qnum; + struct list_head list; + struct list_head tid_q; +}; + +struct ath_buf_state { + int bfs_nframes; + u16 bfs_al; + u16 bfs_frmlen; + int bfs_seqno; + int bfs_tidno; + int bfs_retries; + u8 bf_type; + u32 bfs_keyix; + enum ath9k_key_type bfs_keytype; +}; + +struct ath_buf { + struct list_head list; + struct ath_buf *bf_lastbf; /* last buf of this unit (a frame or + an aggregate) */ + struct ath_buf *bf_next; /* next subframe in the aggregate */ + struct sk_buff *bf_mpdu; /* enclosing frame structure */ + struct ath_desc *bf_desc; /* virtual addr of desc */ + dma_addr_t bf_daddr; /* physical addr of desc */ + dma_addr_t bf_buf_addr; /* physical addr of data buffer */ + bool bf_stale; + u16 bf_flags; + struct ath_buf_state bf_state; + dma_addr_t bf_dmacontext; +}; + +struct ath_atx_tid { + struct list_head list; + struct list_head buf_q; + struct ath_node *an; + struct ath_atx_ac *ac; + struct ath_buf *tx_buf[ATH_TID_MAX_BUFS]; + u16 seq_start; + u16 seq_next; + u16 baw_size; + int tidno; + int baw_head; /* first un-acked tx buffer */ + int baw_tail; /* next unused tx buffer slot */ + int sched; + int paused; + u8 state; +}; + +struct ath_node { + struct ath_common *common; + struct ath_atx_tid tid[WME_NUM_TID]; + struct ath_atx_ac ac[WME_NUM_AC]; + u16 maxampdu; + u8 mpdudensity; + int last_rssi; +}; + +int ath9k_cmn_rx_skb_preprocess(struct ath_common *common, + struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rx_status, + bool *decrypt_error); + +void ath9k_cmn_rx_skb_postprocess(struct ath_common *common, + struct sk_buff *skb, + struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rxs, + bool decrypt_error); diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h index fa21a62..94cb9f8 100644 --- a/drivers/net/wireless/ath/ath9k/rc.h +++ b/drivers/net/wireless/ath/ath9k/rc.h @@ -19,6 +19,8 @@ #ifndef RC_H #define RC_H +#include "hw.h" + struct ath_softc; #define ATH_RATE_MAX 30 diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 8b7489d..477365e 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -89,282 +89,6 @@ static void ath_setdefantenna(struct ath_softc *sc, u32 antenna) sc->rx.rxotherant = 0; } -/* Assumes you've already done the endian to CPU conversion */ -static bool ath9k_rx_accept(struct ath_common *common, - struct sk_buff *skb, - struct ieee80211_rx_status *rxs, - struct ath_rx_status *rx_stats, - bool *decrypt_error) -{ - struct ath_hw *ah = common->ah; - struct ieee80211_hdr *hdr; - __le16 fc; - - hdr = (struct ieee80211_hdr *) skb->data; - fc = hdr->frame_control; - - if (!rx_stats->rs_datalen) - return false; - /* - * rs_status follows rs_datalen so if rs_datalen is too large - * we can take a hint that hardware corrupted it, so ignore - * those frames. - */ - if (rx_stats->rs_datalen > common->rx_bufsize) - return false; - - if (rx_stats->rs_more) { - /* - * Frame spans multiple descriptors; this cannot happen yet - * as we don't support jumbograms. If not in monitor mode, - * discard the frame. Enable this if you want to see - * error frames in Monitor mode. - */ - if (ah->opmode != NL80211_IFTYPE_MONITOR) - return false; - } else if (rx_stats->rs_status != 0) { - if (rx_stats->rs_status & ATH9K_RXERR_CRC) - rxs->flag |= RX_FLAG_FAILED_FCS_CRC; - if (rx_stats->rs_status & ATH9K_RXERR_PHY) - return false; - - if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) { - *decrypt_error = true; - } else if (rx_stats->rs_status & ATH9K_RXERR_MIC) { - if (ieee80211_is_ctl(fc)) - /* - * Sometimes, we get invalid - * MIC failures on valid control frames. - * Remove these mic errors. - */ - rx_stats->rs_status &= ~ATH9K_RXERR_MIC; - else - rxs->flag |= RX_FLAG_MMIC_ERROR; - } - /* - * Reject error frames with the exception of - * decryption and MIC failures. For monitor mode, - * we also ignore the CRC error. - */ - if (ah->opmode == NL80211_IFTYPE_MONITOR) { - if (rx_stats->rs_status & - ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | - ATH9K_RXERR_CRC)) - return false; - } else { - if (rx_stats->rs_status & - ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) { - return false; - } - } - } - return true; -} - -static u8 ath9k_process_rate(struct ath_common *common, - struct ieee80211_hw *hw, - struct ath_rx_status *rx_stats, - struct ieee80211_rx_status *rxs, - struct sk_buff *skb) -{ - struct ieee80211_supported_band *sband; - enum ieee80211_band band; - unsigned int i = 0; - - band = hw->conf.channel->band; - sband = hw->wiphy->bands[band]; - - if (rx_stats->rs_rate & 0x80) { - /* HT rate */ - rxs->flag |= RX_FLAG_HT; - if (rx_stats->rs_flags & ATH9K_RX_2040) - rxs->flag |= RX_FLAG_40MHZ; - if (rx_stats->rs_flags & ATH9K_RX_GI) - rxs->flag |= RX_FLAG_SHORT_GI; - return rx_stats->rs_rate & 0x7f; - } - - for (i = 0; i < sband->n_bitrates; i++) { - if (sband->bitrates[i].hw_value == rx_stats->rs_rate) - return i; - if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) { - rxs->flag |= RX_FLAG_SHORTPRE; - return i; - } - } - - /* No valid hardware bitrate found -- we should not get here */ - ath_print(common, ATH_DBG_XMIT, "unsupported hw bitrate detected " - "0x%02x using 1 Mbit\n", rx_stats->rs_rate); - if ((common->debug_mask & ATH_DBG_XMIT)) - print_hex_dump_bytes("", DUMP_PREFIX_NONE, skb->data, skb->len); - - return 0; -} - -/* - * Theory for reporting quality: - * - * At a hardware RSSI of 45 you will be able to use MCS 7 reliably. - * At a hardware RSSI of 45 you will be able to use MCS 15 reliably. - * At a hardware RSSI of 35 you should be able use 54 Mbps reliably. - * - * MCS 7 is the highets MCS index usable by a 1-stream device. - * MCS 15 is the highest MCS index usable by a 2-stream device. - * - * All ath9k devices are either 1-stream or 2-stream. - * - * How many bars you see is derived from the qual reporting. - * - * A more elaborate scheme can be used here but it requires tables - * of SNR/throughput for each possible mode used. For the MCS table - * you can refer to the wireless wiki: - * - * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n - * - */ -static int ath9k_compute_qual(struct ieee80211_hw *hw, - struct ath_rx_status *rx_stats) -{ - int qual; - - if (conf_is_ht(&hw->conf)) - qual = rx_stats->rs_rssi * 100 / 45; - else - qual = rx_stats->rs_rssi * 100 / 35; - - /* - * rssi can be more than 45 though, anything above that - * should be considered at 100% - */ - if (qual > 100) - qual = 100; - - return qual; -} - -static void ath9k_process_rssi(struct ath_common *common, - struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ath_rx_status *rx_stats) -{ - struct ath_hw *ah = common->ah; - struct ieee80211_sta *sta; - struct ieee80211_hdr *hdr; - struct ath_node *an; - int last_rssi = ATH_RSSI_DUMMY_MARKER; - __le16 fc; - - hdr = (struct ieee80211_hdr *)skb->data; - fc = hdr->frame_control; - - rcu_read_lock(); - /* XXX: use ieee80211_find_sta! */ - sta = ieee80211_find_sta_by_hw(hw, hdr->addr2); - if (sta) { - an = (struct ath_node *) sta->drv_priv; - if (rx_stats->rs_rssi != ATH9K_RSSI_BAD && - !rx_stats->rs_moreaggr) - ATH_RSSI_LPF(an->last_rssi, rx_stats->rs_rssi); - last_rssi = an->last_rssi; - } - rcu_read_unlock(); - - if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER)) - rx_stats->rs_rssi = ATH_EP_RND(last_rssi, - ATH_RSSI_EP_MULTIPLIER); - if (rx_stats->rs_rssi < 0) - rx_stats->rs_rssi = 0; - else if (rx_stats->rs_rssi > 127) - rx_stats->rs_rssi = 127; - - /* Update Beacon RSSI, this is used by ANI. */ - if (ieee80211_is_beacon(fc)) - ah->stats.avgbrssi = rx_stats->rs_rssi; -} - -/* - * For Decrypt or Demic errors, we only mark packet status here and always push - * up the frame up to let mac80211 handle the actual error case, be it no - * decryption key or real decryption error. This let us keep statistics there. - */ -static int ath9k_rx_skb_preprocess(struct ath_common *common, - struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ath_rx_status *rx_stats, - struct ieee80211_rx_status *rx_status, - bool *decrypt_error) -{ - struct ath_hw *ah = common->ah; - - if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error)) - return -EINVAL; - - ath9k_process_rssi(common, hw, skb, rx_stats); - - rx_status->rate_idx = ath9k_process_rate(common, hw, - rx_stats, rx_status, skb); - rx_status->mactime = ath9k_hw_extend_tsf(ah, rx_stats->rs_tstamp); - rx_status->band = hw->conf.channel->band; - rx_status->freq = hw->conf.channel->center_freq; - rx_status->noise = common->ani.noise_floor; - rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + rx_stats->rs_rssi; - rx_status->antenna = rx_stats->rs_antenna; - rx_status->qual = ath9k_compute_qual(hw, rx_stats); - rx_status->flag |= RX_FLAG_TSFT; - - return 0; -} - -static void ath9k_rx_skb_postprocess(struct ath_common *common, - struct sk_buff *skb, - struct ath_rx_status *rx_stats, - struct ieee80211_rx_status *rxs, - bool decrypt_error) -{ - struct ath_hw *ah = common->ah; - struct ieee80211_hdr *hdr; - int hdrlen, padsize; - u8 keyix; - __le16 fc; - - /* see if any padding is done by the hw and remove it */ - hdr = (struct ieee80211_hdr *) skb->data; - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - fc = hdr->frame_control; - - /* The MAC header is padded to have 32-bit boundary if the - * packet payload is non-zero. The general calculation for - * padsize would take into account odd header lengths: - * padsize = (4 - hdrlen % 4) % 4; However, since only - * even-length headers are used, padding can only be 0 or 2 - * bytes and we can optimize this a bit. In addition, we must - * not try to remove padding from short control frames that do - * not have payload. */ - padsize = hdrlen & 3; - if (padsize && hdrlen >= 24) { - memmove(skb->data + padsize, skb->data, hdrlen); - skb_pull(skb, padsize); - } - - keyix = rx_stats->rs_keyix; - - if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) { - rxs->flag |= RX_FLAG_DECRYPTED; - } else if (ieee80211_has_protected(fc) - && !decrypt_error && skb->len >= hdrlen + 4) { - keyix = skb->data[hdrlen + 3] >> 6; - - if (test_bit(keyix, common->keymap)) - rxs->flag |= RX_FLAG_DECRYPTED; - } - if (ah->sw_mgmt_crypto && - (rxs->flag & RX_FLAG_DECRYPTED) && - ieee80211_is_mgmt(fc)) - /* Use software decrypt for management frames. */ - rxs->flag &= ~RX_FLAG_DECRYPTED; -} - static void ath_opmode_init(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; @@ -854,8 +578,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) if (flush) goto requeue; - retval = ath9k_rx_skb_preprocess(common, hw, skb, rx_stats, - rxs, &decrypt_error); + retval = ath9k_cmn_rx_skb_preprocess(common, hw, skb, rx_stats, + rxs, &decrypt_error); if (retval) goto requeue; @@ -877,8 +601,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) skb_put(skb, rx_stats->rs_datalen); - ath9k_rx_skb_postprocess(common, skb, rx_stats, - rxs, decrypt_error); + ath9k_cmn_rx_skb_postprocess(common, skb, rx_stats, + rxs, decrypt_error); /* We will now give hardware our shiny new allocated skb */ bf->bf_mpdu = requeue_skb; -- cgit v0.10.2 From 165864d08774823e3b88d5fcf4dad302700612e3 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 5 Nov 2009 08:53:10 -0800 Subject: ath9k_common: remove ath9k_compute_qual() This is now deprecated and unused within mac80211, so time to remove it as otherwise we'd be doing some unecessary computations for nothing. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c index 5fb164e..80edf7a 100644 --- a/drivers/net/wireless/ath/ath9k/common.c +++ b/drivers/net/wireless/ath/ath9k/common.c @@ -142,47 +142,6 @@ static u8 ath9k_process_rate(struct ath_common *common, return 0; } -/* - * Theory for reporting quality: - * - * At a hardware RSSI of 45 you will be able to use MCS 7 reliably. - * At a hardware RSSI of 45 you will be able to use MCS 15 reliably. - * At a hardware RSSI of 35 you should be able use 54 Mbps reliably. - * - * MCS 7 is the highets MCS index usable by a 1-stream device. - * MCS 15 is the highest MCS index usable by a 2-stream device. - * - * All ath9k devices are either 1-stream or 2-stream. - * - * How many bars you see is derived from the qual reporting. - * - * A more elaborate scheme can be used here but it requires tables - * of SNR/throughput for each possible mode used. For the MCS table - * you can refer to the wireless wiki: - * - * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n - * - */ -static int ath9k_compute_qual(struct ieee80211_hw *hw, - struct ath_rx_status *rx_stats) -{ - int qual; - - if (conf_is_ht(&hw->conf)) - qual = rx_stats->rs_rssi * 100 / 45; - else - qual = rx_stats->rs_rssi * 100 / 35; - - /* - * rssi can be more than 45 though, anything above that - * should be considered at 100% - */ - if (qual > 100) - qual = 100; - - return qual; -} - static void ath9k_process_rssi(struct ath_common *common, struct ieee80211_hw *hw, struct sk_buff *skb, @@ -256,7 +215,6 @@ int ath9k_cmn_rx_skb_preprocess(struct ath_common *common, rx_status->noise = common->ani.noise_floor; rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + rx_stats->rs_rssi; rx_status->antenna = rx_stats->rs_antenna; - rx_status->qual = ath9k_compute_qual(hw, rx_stats); rx_status->flag |= RX_FLAG_TSFT; return 0; -- cgit v0.10.2 From 748d451028ef037576b57517bc81e62f1fd92250 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 5 Nov 2009 14:10:07 -0800 Subject: ath9k_common: clarify and correct jumbogram processing Jumbograms are frames put together linked together through more than one descriptor. For example ath9k_htc will use this to send from the target a large frame split up into 2 or more segments. The driver then would be in charge of putting the frame back together. When jumbograms are constructed the rx_stats->rs_more will bet set and rx_stats->rs_status will not have any valid content as the actual status will only be avialable at the end of the chained descriptors. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c index 80edf7a..acd4bb5 100644 --- a/drivers/net/wireless/ath/ath9k/common.c +++ b/drivers/net/wireless/ath/ath9k/common.c @@ -53,16 +53,17 @@ static bool ath9k_rx_accept(struct ath_common *common, if (rx_stats->rs_datalen > common->rx_bufsize) return false; - if (rx_stats->rs_more) { - /* - * Frame spans multiple descriptors; this cannot happen yet - * as we don't support jumbograms. If not in monitor mode, - * discard the frame. Enable this if you want to see - * error frames in Monitor mode. - */ - if (ah->opmode != NL80211_IFTYPE_MONITOR) - return false; - } else if (rx_stats->rs_status != 0) { + /* + * rs_more indicates chained descriptors which can be used + * to link buffers together for a sort of scatter-gather + * operation. + * + * The rx_stats->rs_status will not be set until the end of the + * chained descriptors so it can be ignored if rs_more is set. The + * rs_more will be false at the last element of the chained + * descriptors. + */ + if (!rx_stats->rs_more && rx_stats->rs_status != 0) { if (rx_stats->rs_status & ATH9K_RXERR_CRC) rxs->flag |= RX_FLAG_FAILED_FCS_CRC; if (rx_stats->rs_status & ATH9K_RXERR_PHY) -- cgit v0.10.2 From a65986824d2552dd76786d5a0012989a64c45ab7 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Sun, 8 Nov 2009 12:30:35 +0100 Subject: rt2x00: Add dynamic detection of eFuse EEPROM in rt2800pci. Instead of assuming that all rt3090 devices will have an eFuse EEPROM, do as the legacy Ralink driver, and detect at run-time whether an eFuse EEPROM is present. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index bff8707..2f284a6 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -145,6 +145,15 @@ static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) EEPROM_SIZE / sizeof(u16)); } +static int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, EFUSE_CTRL, ®); + + return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT); +} + static void rt2800pci_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i) { @@ -182,6 +191,11 @@ static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) { } +static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) +{ + return 0; +} + static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) { } @@ -1091,11 +1105,11 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) case RT3052: rt2800pci_read_eeprom_soc(rt2x00dev); break; - case RT3090: - rt2800pci_read_eeprom_efuse(rt2x00dev); - break; default: - rt2800pci_read_eeprom_pci(rt2x00dev); + if (rt2800pci_efuse_detect(rt2x00dev)) + rt2800pci_read_eeprom_efuse(rt2x00dev); + else + rt2800pci_read_eeprom_pci(rt2x00dev); break; } diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h index 1dbf132..8f944ee 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.h +++ b/drivers/net/wireless/rt2x00/rt2800pci.h @@ -62,6 +62,7 @@ #define EFUSE_CTRL_ADDRESS_IN FIELD32(0x03fe0000) #define EFUSE_CTRL_MODE FIELD32(0x000000c0) #define EFUSE_CTRL_KICK FIELD32(0x40000000) +#define EFUSE_CTRL_PRESENT FIELD32(0x80000000) /* * EFUSE_DATA0 -- cgit v0.10.2 From 863cc978a73bc07f1de0e9a9bd9889bed6e618da Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 8 Nov 2009 14:37:48 +0100 Subject: rt2x00: Remove deprecated ieee80211_rx_status->qual usage ieee80211_rx_status->qual has been marked deprecated. This allows us to remove several functions and fields which were used to calculate a reasonable value for it. Signed-off-by: Ivo van Doorn Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index c83dbae..1a84574 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -313,13 +313,6 @@ struct link { struct avg_val avg_rssi; /* - * Currently precalculated percentages of successful - * TX and RX frames. - */ - int rx_percentage; - int tx_percentage; - - /* * Work structure for scheduling periodic link tuning. */ struct delayed_work work; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 73bbec5..00bfb22 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -430,7 +430,6 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, rx_status->mactime = rxdesc.timestamp; rx_status->rate_idx = rate_idx; - rx_status->qual = rt2x00link_calculate_signal(rt2x00dev, rxdesc.rssi); rx_status->signal = rxdesc.rssi; rx_status->noise = rxdesc.noise; rx_status->flag = rxdesc.flags; diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index 567f029..e1701657 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -223,19 +223,6 @@ void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev, struct rxdone_entry_desc *rxdesc); /** - * rt2x00link_calculate_signal - Calculate signal quality - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @rssi: RX Frame RSSI - * - * Calculate the signal quality of a frame based on the rssi - * measured during the receiving of the frame and the global - * link quality statistics measured since the start of the - * link tuning. The result is a value between 0 and 100 which - * is an indication of the signal quality. - */ -int rt2x00link_calculate_signal(struct rt2x00_dev *rt2x00dev, int rssi); - -/** * rt2x00link_start_tuner - Start periodic link tuner work * @rt2x00dev: Pointer to &struct rt2x00_dev. * diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index c708d0b..f918f29 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -36,24 +36,6 @@ #define DEFAULT_RSSI -128 /* - * When no TX/RX percentage could be calculated due to lack of - * frames on the air, we fallback to a percentage of 50%. - * This will assure we will get at least get some decent value - * when the link tuner starts. - * The value will be dropped and overwritten with the correct (measured) - * value anyway during the first run of the link tuner. - */ -#define DEFAULT_PERCENTAGE 50 - -/* - * Small helper macro for percentage calculation - * This is a very simple macro with the only catch that it will - * produce a default value in case no total value was provided. - */ -#define PERCENTAGE(__value, __total) \ - ( (__total) ? (((__value) * 100) / (__total)) : (DEFAULT_PERCENTAGE) ) - -/* * Helper struct and macro to work with moving/walking averages. * When adding a value to the average value the following calculation * is needed: @@ -91,27 +73,6 @@ __new; \ }) -/* - * For calculating the Signal quality we have determined - * the total number of success and failed RX and TX frames. - * With the addition of the average RSSI value we can determine - * the link quality using the following algorithm: - * - * rssi_percentage = (avg_rssi * 100) / rssi_offset - * rx_percentage = (rx_success * 100) / rx_total - * tx_percentage = (tx_success * 100) / tx_total - * avg_signal = ((WEIGHT_RSSI * avg_rssi) + - * (WEIGHT_TX * tx_percentage) + - * (WEIGHT_RX * rx_percentage)) / 100 - * - * This value should then be checked to not be greater then 100. - * This means the values of WEIGHT_RSSI, WEIGHT_RX, WEIGHT_TX must - * sum up to 100 as well. - */ -#define WEIGHT_RSSI 20 -#define WEIGHT_RX 40 -#define WEIGHT_TX 40 - static int rt2x00link_antenna_get_link_rssi(struct rt2x00_dev *rt2x00dev) { struct link_ant *ant = &rt2x00dev->link.ant; @@ -304,46 +265,6 @@ void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev, ant->rssi_ant = MOVING_AVERAGE(ant->rssi_ant, rxdesc->rssi); } -static void rt2x00link_precalculate_signal(struct rt2x00_dev *rt2x00dev) -{ - struct link *link = &rt2x00dev->link; - struct link_qual *qual = &rt2x00dev->link.qual; - - link->rx_percentage = - PERCENTAGE(qual->rx_success, qual->rx_failed + qual->rx_success); - link->tx_percentage = - PERCENTAGE(qual->tx_success, qual->tx_failed + qual->tx_success); -} - -int rt2x00link_calculate_signal(struct rt2x00_dev *rt2x00dev, int rssi) -{ - struct link *link = &rt2x00dev->link; - int rssi_percentage = 0; - int signal; - - /* - * We need a positive value for the RSSI. - */ - if (rssi < 0) - rssi += rt2x00dev->rssi_offset; - - /* - * Calculate the different percentages, - * which will be used for the signal. - */ - rssi_percentage = PERCENTAGE(rssi, rt2x00dev->rssi_offset); - - /* - * Add the individual percentages and use the WEIGHT - * defines to calculate the current link signal. - */ - signal = ((WEIGHT_RSSI * rssi_percentage) + - (WEIGHT_TX * link->tx_percentage) + - (WEIGHT_RX * link->rx_percentage)) / 100; - - return max_t(int, signal, 100); -} - void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) { struct link *link = &rt2x00dev->link; @@ -357,9 +278,6 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) if (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count) return; - link->rx_percentage = DEFAULT_PERCENTAGE; - link->tx_percentage = DEFAULT_PERCENTAGE; - rt2x00link_reset_tuner(rt2x00dev, false); if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) @@ -448,12 +366,6 @@ static void rt2x00link_tuner(struct work_struct *work) rt2x00dev->ops->lib->link_tuner(rt2x00dev, qual, link->count); /* - * Precalculate a portion of the link signal which is - * in based on the tx/rx success/failure counters. - */ - rt2x00link_precalculate_signal(rt2x00dev); - - /* * Send a signal to the led to update the led signal strength. */ rt2x00leds_led_quality(rt2x00dev, qual->rssi); -- cgit v0.10.2 From 7ab71325cf0940099c376799aca6de7bc86ad2d0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 8 Nov 2009 14:38:54 +0100 Subject: rt2800: prepare for unification of EEPROM support code * Factor out common code from rt2800[pci,usb]_validate_eeprom() to rt2800_validate_eeprom(). * Fix interface specific comment in rt2800[pci,usb]_validate_eeprom(). * Enclose interface specific code in rt2800[pci,usb]_init_eeprom() with rt2x00_intf_is_[pci,usb]() checks. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Ivo van Doorn Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 2f284a6..67081a4f 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1091,29 +1091,13 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) /* * Device probe functions. */ -static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) +static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) { u16 word; u8 *mac; u8 default_lna_gain; /* - * Read EEPROM into buffer - */ - switch(rt2x00dev->chip.rt) { - case RT2880: - case RT3052: - rt2800pci_read_eeprom_soc(rt2x00dev); - break; - default: - if (rt2800pci_efuse_detect(rt2x00dev)) - rt2800pci_read_eeprom_efuse(rt2x00dev); - else - rt2800pci_read_eeprom_pci(rt2x00dev); - break; - } - - /* * Start validation of the data that has been read. */ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); @@ -1131,7 +1115,7 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) { /* - * There is a max of 2 RX streams for RT2860 series + * There is a max of 2 RX streams for RT28x0 series */ if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2) rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); @@ -1210,6 +1194,27 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) return 0; } +static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + /* + * Read EEPROM into buffer + */ + switch (rt2x00dev->chip.rt) { + case RT2880: + case RT3052: + rt2800pci_read_eeprom_soc(rt2x00dev); + break; + default: + if (rt2800pci_efuse_detect(rt2x00dev)) + rt2800pci_read_eeprom_efuse(rt2x00dev); + else + rt2800pci_read_eeprom_pci(rt2x00dev); + break; + } + + return rt2800_validate_eeprom(rt2x00dev); +} + static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev) { u32 reg; @@ -1226,7 +1231,9 @@ static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev) */ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2800_register_read(rt2x00dev, MAC_CSR0, ®); - rt2x00_set_chip_rf(rt2x00dev, value, reg); + + if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00_set_chip_rf(rt2x00dev, value, reg); if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && !rt2x00_rf(&rt2x00dev->chip, RF2850) && @@ -1234,8 +1241,10 @@ static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev) !rt2x00_rf(&rt2x00dev->chip, RF2750) && !rt2x00_rf(&rt2x00dev->chip, RF3020) && !rt2x00_rf(&rt2x00dev->chip, RF2020) && - !rt2x00_rf(&rt2x00dev->chip, RF3021) && - !rt2x00_rf(&rt2x00dev->chip, RF3022)) { + (rt2x00_intf_is_usb(rt2x00dev) || + (rt2x00_intf_is_pci(rt2x00dev) && + !rt2x00_rf(&rt2x00dev->chip, RF3021) && + !rt2x00_rf(&rt2x00dev->chip, RF3022)))) { ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); return -ENODEV; } diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 3168ad4..080947c 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -665,14 +665,12 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, /* * Device probe functions. */ -static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) +static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) { u16 word; u8 *mac; u8 default_lna_gain; - rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); - /* * Start validation of the data that has been read. */ @@ -691,7 +689,7 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) { /* - * There is a max of 2 RX streams for RT2870 series + * There is a max of 2 RX streams for RT28x0 series */ if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2) rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); @@ -770,6 +768,13 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) return 0; } +static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); + + return rt2800_validate_eeprom(rt2x00dev); +} + static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) { u32 reg; @@ -786,18 +791,23 @@ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) */ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2800_register_read(rt2x00dev, MAC_CSR0, ®); - rt2x00_set_chip(rt2x00dev, RT2870, value, reg); - /* - * The check for rt2860 is not a typo, some rt2870 hardware - * identifies itself as rt2860 in the CSR register. - */ - if (!rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28600000) && - !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28700000) && - !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28800000) && - !rt2x00_check_rev(&rt2x00dev->chip, 0xffff0000, 0x30700000)) { - ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); - return -ENODEV; + if (rt2x00_intf_is_usb(rt2x00dev)) { + struct rt2x00_chip *chip = &rt2x00dev->chip; + + rt2x00_set_chip(rt2x00dev, RT2870, value, reg); + + /* + * The check for rt2860 is not a typo, some rt2870 hardware + * identifies itself as rt2860 in the CSR register. + */ + if (!rt2x00_check_rev(chip, 0xfff00000, 0x28600000) && + !rt2x00_check_rev(chip, 0xfff00000, 0x28700000) && + !rt2x00_check_rev(chip, 0xfff00000, 0x28800000) && + !rt2x00_check_rev(chip, 0xffff0000, 0x30700000)) { + ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); + return -ENODEV; + } } if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && -- cgit v0.10.2 From 38bd7b8a0f485ba5ad514fcd621a1842ebadf9e6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 8 Nov 2009 14:39:01 +0100 Subject: rt2800: unify EEPROM support code Add rt2800_validate_eeprom() and rt2800_init_eeprom() to rt2800lib. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Ivo van Doorn Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 5c7d74a..2c21119 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1659,6 +1659,205 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) } EXPORT_SYMBOL_GPL(rt2800_init_rfcsr); +int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u16 word; + u8 *mac; + u8 default_lna_gain; + + /* + * Start validation of the data that has been read. + */ + mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); + if (!is_valid_ether_addr(mac)) { + random_ether_addr(mac); + EEPROM(rt2x00dev, "MAC: %pM\n", mac); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); + rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1); + rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820); + rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); + EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); + } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) { + /* + * There is a max of 2 RX streams for RT28x0 series + */ + if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2) + rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); + rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); + if (word == 0xffff) { + rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0); + rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0); + rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); + rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); + rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); + rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0); + rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0); + rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0); + rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0); + rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); + EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); + } + + rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); + if ((word & 0x00ff) == 0x00ff) { + rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); + rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE, + LED_MODE_TXRX_ACTIVITY); + rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); + rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555); + rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221); + rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8); + EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); + } + + /* + * During the LNA validation we are going to use + * lna0 as correct value. Note that EEPROM_LNA + * is never validated. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word); + default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); + if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || + rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) + rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, + default_lna_gain); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word); + if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) + rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); + if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || + rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) + rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, + default_lna_gain); + rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_validate_eeprom); + +int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 value; + u16 eeprom; + + /* + * Read EEPROM word for configuration. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + + /* + * Identify RF chipset. + */ + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); + + if (rt2x00_intf_is_usb(rt2x00dev)) { + struct rt2x00_chip *chip = &rt2x00dev->chip; + + rt2x00_set_chip(rt2x00dev, RT2870, value, reg); + + /* + * The check for rt2860 is not a typo, some rt2870 hardware + * identifies itself as rt2860 in the CSR register. + */ + if (!rt2x00_check_rev(chip, 0xfff00000, 0x28600000) && + !rt2x00_check_rev(chip, 0xfff00000, 0x28700000) && + !rt2x00_check_rev(chip, 0xfff00000, 0x28800000) && + !rt2x00_check_rev(chip, 0xffff0000, 0x30700000)) { + ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); + return -ENODEV; + } + } else if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00_set_chip_rf(rt2x00dev, value, reg); + + if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && + !rt2x00_rf(&rt2x00dev->chip, RF2850) && + !rt2x00_rf(&rt2x00dev->chip, RF2720) && + !rt2x00_rf(&rt2x00dev->chip, RF2750) && + !rt2x00_rf(&rt2x00dev->chip, RF3020) && + !rt2x00_rf(&rt2x00dev->chip, RF2020) && + (rt2x00_intf_is_usb(rt2x00dev) || + (rt2x00_intf_is_pci(rt2x00dev) && + !rt2x00_rf(&rt2x00dev->chip, RF3021) && + !rt2x00_rf(&rt2x00dev->chip, RF3022)))) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } + + /* + * Identify default antenna configuration. + */ + rt2x00dev->default_ant.tx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH); + rt2x00dev->default_ant.rx = + rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH); + + /* + * Read frequency offset and RF programming sequence. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); + rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); + + /* + * Read external LNA informations. + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); + + if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) + __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) + __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); + + /* + * Detect if this device has an hardware controlled radio. + */ + if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO)) + __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); + + /* + * Store led settings, for correct led behaviour. + */ +#ifdef CONFIG_RT2X00_LIB_LEDS + rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg); +#endif /* CONFIG_RT2X00_LIB_LEDS */ + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_init_eeprom); + /* * IEEE80211 stack callback functions. */ diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index 5eea8fc..da44711 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -129,6 +129,9 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev); int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev); int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev); +int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev); +int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev); + extern const struct ieee80211_ops rt2800_mac80211_ops; #endif /* RT2800LIB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 67081a4f..06d9835 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1091,109 +1091,6 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) /* * Device probe functions. */ -static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u16 word; - u8 *mac; - u8 default_lna_gain; - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - random_ether_addr(mac); - EEPROM(rt2x00dev, "MAC: %pM\n", mac); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); - } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) { - /* - * There is a max of 2 RX streams for RT28x0 series - */ - if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2) - rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0); - rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0); - rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); - rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); - rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0); - rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0); - rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0); - rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0); - rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); - if ((word & 0x00ff) == 0x00ff) { - rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); - rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE, - LED_MODE_TXRX_ACTIVITY); - rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); - rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555); - rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221); - rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8); - EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); - } - - /* - * During the LNA validation we are going to use - * lna0 as correct value. Note that EEPROM_LNA - * is never validated. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word); - default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); - if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || - rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) - rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, - default_lna_gain); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); - if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || - rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) - rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, - default_lna_gain); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); - - return 0; -} - static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) { /* @@ -1215,84 +1112,6 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) return rt2800_validate_eeprom(rt2x00dev); } -static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 value; - u16 eeprom; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2800_register_read(rt2x00dev, MAC_CSR0, ®); - - if (rt2x00_intf_is_pci(rt2x00dev)) - rt2x00_set_chip_rf(rt2x00dev, value, reg); - - if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && - !rt2x00_rf(&rt2x00dev->chip, RF2850) && - !rt2x00_rf(&rt2x00dev->chip, RF2720) && - !rt2x00_rf(&rt2x00dev->chip, RF2750) && - !rt2x00_rf(&rt2x00dev->chip, RF3020) && - !rt2x00_rf(&rt2x00dev->chip, RF2020) && - (rt2x00_intf_is_usb(rt2x00dev) || - (rt2x00_intf_is_pci(rt2x00dev) && - !rt2x00_rf(&rt2x00dev->chip, RF3021) && - !rt2x00_rf(&rt2x00dev->chip, RF3022)))) { - ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); - return -ENODEV; - } - - /* - * Identify default antenna configuration. - */ - rt2x00dev->default_ant.tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH); - rt2x00dev->default_ant.rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH); - - /* - * Read frequency offset and RF programming sequence. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); - rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); - - /* - * Read external LNA informations. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); - - if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) - __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) - __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); - - /* - * Detect if this device has an hardware controlled radio. - */ - if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO)) - __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); - - /* - * Store led settings, for correct led behaviour. - */ -#ifdef CONFIG_RT2X00_LIB_LEDS - rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); - rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg); -#endif /* CONFIG_RT2X00_LIB_LEDS */ - - return 0; -} - /* * RF value list for rt2860 * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750) @@ -1497,7 +1316,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) if (retval) return retval; - retval = rt2800pci_init_eeprom(rt2x00dev); + retval = rt2800_init_eeprom(rt2x00dev); if (retval) return retval; diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 080947c..347c14d 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -665,109 +665,6 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, /* * Device probe functions. */ -static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u16 word; - u8 *mac; - u8 default_lna_gain; - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - random_ether_addr(mac); - EEPROM(rt2x00dev, "MAC: %pM\n", mac); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); - } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) { - /* - * There is a max of 2 RX streams for RT28x0 series - */ - if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2) - rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0); - rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0); - rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); - rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); - rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0); - rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0); - rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0); - rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0); - rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); - if ((word & 0x00ff) == 0x00ff) { - rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); - rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE, - LED_MODE_TXRX_ACTIVITY); - rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); - rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555); - rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221); - rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8); - EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); - } - - /* - * During the LNA validation we are going to use - * lna0 as correct value. Note that EEPROM_LNA - * is never validated. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word); - default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); - if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || - rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) - rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, - default_lna_gain); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word); - if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); - if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || - rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) - rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, - default_lna_gain); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); - - return 0; -} - static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) { rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); @@ -775,96 +672,6 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) return rt2800_validate_eeprom(rt2x00dev); } -static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 value; - u16 eeprom; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2800_register_read(rt2x00dev, MAC_CSR0, ®); - - if (rt2x00_intf_is_usb(rt2x00dev)) { - struct rt2x00_chip *chip = &rt2x00dev->chip; - - rt2x00_set_chip(rt2x00dev, RT2870, value, reg); - - /* - * The check for rt2860 is not a typo, some rt2870 hardware - * identifies itself as rt2860 in the CSR register. - */ - if (!rt2x00_check_rev(chip, 0xfff00000, 0x28600000) && - !rt2x00_check_rev(chip, 0xfff00000, 0x28700000) && - !rt2x00_check_rev(chip, 0xfff00000, 0x28800000) && - !rt2x00_check_rev(chip, 0xffff0000, 0x30700000)) { - ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); - return -ENODEV; - } - } - - if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && - !rt2x00_rf(&rt2x00dev->chip, RF2850) && - !rt2x00_rf(&rt2x00dev->chip, RF2720) && - !rt2x00_rf(&rt2x00dev->chip, RF2750) && - !rt2x00_rf(&rt2x00dev->chip, RF3020) && - !rt2x00_rf(&rt2x00dev->chip, RF2020)) { - ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); - return -ENODEV; - } - - /* - * Identify default antenna configuration. - */ - rt2x00dev->default_ant.tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH); - rt2x00dev->default_ant.rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH); - - /* - * Read frequency offset and RF programming sequence. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); - rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); - - /* - * Read external LNA informations. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); - - if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) - __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) - __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); - - /* - * Detect if this device has an hardware controlled radio. - */ - if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO)) - __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); - - /* - * Store led settings, for correct led behaviour. - */ -#ifdef CONFIG_RT2X00_LIB_LEDS - rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); - rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, - &rt2x00dev->led_mcu_reg); -#endif /* CONFIG_RT2X00_LIB_LEDS */ - - return 0; -} - /* * RF value list for rt2870 * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750) @@ -1093,7 +900,7 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) if (retval) return retval; - retval = rt2800usb_init_eeprom(rt2x00dev); + retval = rt2800_init_eeprom(rt2x00dev); if (retval) return retval; -- cgit v0.10.2 From 4d685e550b5ace42fdf6d72506bab6e7ae93e669 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 8 Nov 2009 14:39:09 +0100 Subject: rt2800pci: add missing RF values to rf_vals table rt2800pci's rf_vals[] copy was missing values for some channels. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Ivo van Doorn Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 06d9835..f9ab372 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1172,6 +1172,10 @@ static const struct rf_channel rf_vals[] = { { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, + { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f }, + { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 }, + { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 }, + { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f }, /* 802.11 Japan */ { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, -- cgit v0.10.2 From 726984b61e744c1fef72d20e56eadd0864ecb240 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 8 Nov 2009 14:39:16 +0100 Subject: rt2800usb: reorganize code in rt2800usb_probe_hw_mode() Move hw_mode information initialization code block before HT information initialization one to match the ordering used by rt2800pci's rt2800pci_probe_hw_mode(). Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Ivo van Doorn Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 347c14d..36acb38 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -795,6 +795,27 @@ static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); /* + * Initialize hw_mode information. + */ + spec->supported_bands = SUPPORT_BAND_2GHZ; + spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; + + if (rt2x00_rf(&rt2x00dev->chip, RF2820) || + rt2x00_rf(&rt2x00dev->chip, RF2720)) { + spec->num_channels = 14; + spec->channels = rf_vals; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) || + rt2x00_rf(&rt2x00dev->chip, RF2750)) { + spec->supported_bands |= SUPPORT_BAND_5GHZ; + spec->num_channels = ARRAY_SIZE(rf_vals); + spec->channels = rf_vals; + } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) || + rt2x00_rf(&rt2x00dev->chip, RF2020)) { + spec->num_channels = ARRAY_SIZE(rf_vals_3070); + spec->channels = rf_vals_3070; + } + + /* * Initialize HT information. */ spec->ht.ht_supported = true; @@ -826,27 +847,6 @@ static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) } /* - * Initialize hw_mode information. - */ - spec->supported_bands = SUPPORT_BAND_2GHZ; - spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - - if (rt2x00_rf(&rt2x00dev->chip, RF2820) || - rt2x00_rf(&rt2x00dev->chip, RF2720)) { - spec->num_channels = 14; - spec->channels = rf_vals; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) || - rt2x00_rf(&rt2x00dev->chip, RF2750)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; - spec->num_channels = ARRAY_SIZE(rf_vals); - spec->channels = rf_vals; - } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) || - rt2x00_rf(&rt2x00dev->chip, RF2020)) { - spec->num_channels = ARRAY_SIZE(rf_vals_3070); - spec->channels = rf_vals_3070; - } - - /* * Create channel information array */ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); -- cgit v0.10.2 From f2b38cbfd98eb36799f45178c73b2ed81402abd8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 8 Nov 2009 14:39:25 +0100 Subject: rt2800: prepare for rt2800*_probe_hw_mode() unification Enclose interface specific code in rt2800[pci,usb]_probe_hw_mode() with rt2x00_intf_is_[pci,usb]() checks. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Ivo van Doorn Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index f9ab372..c607790 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1189,6 +1189,7 @@ static const struct rf_channel rf_vals[] = { static int rt2800pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { + struct rt2x00_chip *chip = &rt2x00dev->chip; struct hw_mode_spec *spec = &rt2x00dev->spec; struct channel_info *info; char *tx_power1; @@ -1204,7 +1205,9 @@ static int rt2800pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; - rt2x00dev->hw->extra_tx_headroom = TXWI_DESC_SIZE; + + if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00dev->hw->extra_tx_headroom = TXWI_DESC_SIZE; SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, @@ -1219,17 +1222,18 @@ static int rt2800pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - if (rt2x00_rf(&rt2x00dev->chip, RF2820) || - rt2x00_rf(&rt2x00dev->chip, RF2720) || - rt2x00_rf(&rt2x00dev->chip, RF3020) || - rt2x00_rf(&rt2x00dev->chip, RF3021) || - rt2x00_rf(&rt2x00dev->chip, RF3022) || - rt2x00_rf(&rt2x00dev->chip, RF2020) || - rt2x00_rf(&rt2x00dev->chip, RF3052)) { + if (rt2x00_rf(chip, RF2820) || + rt2x00_rf(chip, RF2720) || + (rt2x00_intf_is_pci(rt2x00dev) && + (rt2x00_rf(chip, RF3020) || + rt2x00_rf(chip, RF3021) || + rt2x00_rf(chip, RF3022) || + rt2x00_rf(chip, RF2020) || + rt2x00_rf(chip, RF3052)))) { spec->num_channels = 14; spec->channels = rf_vals; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) || - rt2x00_rf(&rt2x00dev->chip, RF2750)) { + } else if (rt2x00_rf(chip, RF2850) || + rt2x00_rf(chip, RF2750)) { spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals); spec->channels = rf_vals; diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 36acb38..e86858a 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -770,6 +770,7 @@ static const struct rf_channel rf_vals_3070[] = { static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { + struct rt2x00_chip *chip = &rt2x00dev->chip; struct hw_mode_spec *spec = &rt2x00dev->spec; struct channel_info *info; char *tx_power1; @@ -785,7 +786,10 @@ static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; - rt2x00dev->hw->extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE; + + if (rt2x00_intf_is_usb(rt2x00dev)) + rt2x00dev->hw->extra_tx_headroom = + TXINFO_DESC_SIZE + TXWI_DESC_SIZE; SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, @@ -800,17 +804,18 @@ static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - if (rt2x00_rf(&rt2x00dev->chip, RF2820) || - rt2x00_rf(&rt2x00dev->chip, RF2720)) { + if (rt2x00_rf(chip, RF2820) || + rt2x00_rf(chip, RF2720)) { spec->num_channels = 14; spec->channels = rf_vals; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) || - rt2x00_rf(&rt2x00dev->chip, RF2750)) { + } else if (rt2x00_rf(chip, RF2850) || + rt2x00_rf(chip, RF2750)) { spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals); spec->channels = rf_vals; - } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) || - rt2x00_rf(&rt2x00dev->chip, RF2020)) { + } else if (rt2x00_intf_is_usb(rt2x00dev) && + (rt2x00_rf(chip, RF3020) || + rt2x00_rf(chip, RF2020))) { spec->num_channels = ARRAY_SIZE(rf_vals_3070); spec->channels = rf_vals_3070; } -- cgit v0.10.2 From 4da2933fe1f2d3d9ed548660f5c02a9b0608a8c7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 8 Nov 2009 14:39:32 +0100 Subject: rt2800: unify rt2800*_probe_hw_mode() Add rf_vals tables and rt2800_probe_hw_mode() to rt2800lib. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 2c21119..d7771ea 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1859,6 +1859,224 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) EXPORT_SYMBOL_GPL(rt2800_init_eeprom); /* + * RF value list for rt28x0 + * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750) + */ +static const struct rf_channel rf_vals[] = { + { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b }, + { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f }, + { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b }, + { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f }, + { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b }, + { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f }, + { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b }, + { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f }, + { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b }, + { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f }, + { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b }, + { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f }, + { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b }, + { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 }, + + /* 802.11 UNI / HyperLan 2 */ + { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 }, + { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 }, + { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 }, + { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 }, + { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b }, + { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b }, + { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 }, + { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 }, + { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b }, + { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 }, + { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 }, + { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 }, + + /* 802.11 HyperLan 2 */ + { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, + { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, + { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 }, + { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 }, + { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, + { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, + { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, + { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 }, + { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 }, + { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 }, + { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b }, + { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 }, + { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b }, + { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 }, + { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b }, + { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 }, + + /* 802.11 UNII */ + { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 }, + { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 }, + { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f }, + { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f }, + { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, + { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, + { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, + { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f }, + { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 }, + { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 }, + { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f }, + + /* 802.11 Japan */ + { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, + { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 }, + { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b }, + { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 }, + { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 }, + { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b }, + { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, +}; + +/* + * RF value list for rt3070 + * Supports: 2.4 GHz + */ +static const struct rf_channel rf_vals_3070[] = { + {1, 241, 2, 2 }, + {2, 241, 2, 7 }, + {3, 242, 2, 2 }, + {4, 242, 2, 7 }, + {5, 243, 2, 2 }, + {6, 243, 2, 7 }, + {7, 244, 2, 2 }, + {8, 244, 2, 7 }, + {9, 245, 2, 2 }, + {10, 245, 2, 7 }, + {11, 246, 2, 2 }, + {12, 246, 2, 7 }, + {13, 247, 2, 2 }, + {14, 248, 2, 4 }, +}; + +int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +{ + struct rt2x00_chip *chip = &rt2x00dev->chip; + struct hw_mode_spec *spec = &rt2x00dev->spec; + struct channel_info *info; + char *tx_power1; + char *tx_power2; + unsigned int i; + u16 eeprom; + + /* + * Initialize all hw fields. + */ + rt2x00dev->hw->flags = + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK; + + if (rt2x00_intf_is_usb(rt2x00dev)) + rt2x00dev->hw->extra_tx_headroom = + TXINFO_DESC_SIZE + TXWI_DESC_SIZE; + else if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00dev->hw->extra_tx_headroom = TXWI_DESC_SIZE; + + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); + SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, + rt2x00_eeprom_addr(rt2x00dev, + EEPROM_MAC_ADDR_0)); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + + /* + * Initialize hw_mode information. + */ + spec->supported_bands = SUPPORT_BAND_2GHZ; + spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; + + if (rt2x00_rf(chip, RF2820) || + rt2x00_rf(chip, RF2720) || + (rt2x00_intf_is_pci(rt2x00dev) && + (rt2x00_rf(chip, RF3020) || + rt2x00_rf(chip, RF3021) || + rt2x00_rf(chip, RF3022) || + rt2x00_rf(chip, RF2020) || + rt2x00_rf(chip, RF3052)))) { + spec->num_channels = 14; + spec->channels = rf_vals; + } else if (rt2x00_rf(chip, RF2850) || + rt2x00_rf(chip, RF2750)) { + spec->supported_bands |= SUPPORT_BAND_5GHZ; + spec->num_channels = ARRAY_SIZE(rf_vals); + spec->channels = rf_vals; + } else if (rt2x00_intf_is_usb(rt2x00dev) && + (rt2x00_rf(chip, RF3020) || + rt2x00_rf(chip, RF2020))) { + spec->num_channels = ARRAY_SIZE(rf_vals_3070); + spec->channels = rf_vals_3070; + } + + /* + * Initialize HT information. + */ + spec->ht.ht_supported = true; + spec->ht.cap = + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_TX_STBC | + IEEE80211_HT_CAP_RX_STBC | + IEEE80211_HT_CAP_PSMP_SUPPORT; + spec->ht.ampdu_factor = 3; + spec->ht.ampdu_density = 4; + spec->ht.mcs.tx_params = + IEEE80211_HT_MCS_TX_DEFINED | + IEEE80211_HT_MCS_TX_RX_DIFF | + ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) << + IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); + + switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) { + case 3: + spec->ht.mcs.rx_mask[2] = 0xff; + case 2: + spec->ht.mcs.rx_mask[1] = 0xff; + case 1: + spec->ht.mcs.rx_mask[0] = 0xff; + spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */ + break; + } + + /* + * Create channel information array + */ + info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + spec->channels_info = info; + + tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); + tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); + + for (i = 0; i < 14; i++) { + info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]); + info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]); + } + + if (spec->num_channels > 14) { + tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1); + tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); + + for (i = 14; i < spec->num_channels; i++) { + info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]); + info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]); + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode); + +/* * IEEE80211 stack callback functions. */ static void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index da44711..2aa15f2 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -131,6 +131,7 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev); int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev); int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev); +int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev); extern const struct ieee80211_ops rt2800_mac80211_ops; diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index c607790..e8fe2ea 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1112,194 +1112,6 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) return rt2800_validate_eeprom(rt2x00dev); } -/* - * RF value list for rt2860 - * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750) - */ -static const struct rf_channel rf_vals[] = { - { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b }, - { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f }, - { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b }, - { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f }, - { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b }, - { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f }, - { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b }, - { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f }, - { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b }, - { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f }, - { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b }, - { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f }, - { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b }, - { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 }, - { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 }, - { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 }, - { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 }, - { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b }, - { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b }, - { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 }, - { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 }, - { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b }, - { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 }, - { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 }, - { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 }, - - /* 802.11 HyperLan 2 */ - { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, - { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, - { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 }, - { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 }, - { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, - { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, - { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, - { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 }, - { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 }, - { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 }, - { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b }, - { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 }, - { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b }, - { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 }, - { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b }, - { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 }, - - /* 802.11 UNII */ - { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 }, - { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 }, - { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f }, - { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f }, - { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, - { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, - { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, - { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f }, - { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 }, - { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 }, - { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f }, - - /* 802.11 Japan */ - { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, - { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 }, - { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b }, - { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 }, - { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 }, - { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b }, - { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, -}; - -static int rt2800pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct rt2x00_chip *chip = &rt2x00dev->chip; - struct hw_mode_spec *spec = &rt2x00dev->spec; - struct channel_info *info; - char *tx_power1; - char *tx_power2; - unsigned int i; - u16 eeprom; - - /* - * Initialize all hw fields. - */ - rt2x00dev->hw->flags = - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_PS_NULLFUNC_STACK; - - if (rt2x00_intf_is_pci(rt2x00dev)) - rt2x00dev->hw->extra_tx_headroom = TXWI_DESC_SIZE; - - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Initialize hw_mode information. - */ - spec->supported_bands = SUPPORT_BAND_2GHZ; - spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - - if (rt2x00_rf(chip, RF2820) || - rt2x00_rf(chip, RF2720) || - (rt2x00_intf_is_pci(rt2x00dev) && - (rt2x00_rf(chip, RF3020) || - rt2x00_rf(chip, RF3021) || - rt2x00_rf(chip, RF3022) || - rt2x00_rf(chip, RF2020) || - rt2x00_rf(chip, RF3052)))) { - spec->num_channels = 14; - spec->channels = rf_vals; - } else if (rt2x00_rf(chip, RF2850) || - rt2x00_rf(chip, RF2750)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; - spec->num_channels = ARRAY_SIZE(rf_vals); - spec->channels = rf_vals; - } - - /* - * Initialize HT information. - */ - spec->ht.ht_supported = true; - spec->ht.cap = - IEEE80211_HT_CAP_SUP_WIDTH_20_40 | - IEEE80211_HT_CAP_GRN_FLD | - IEEE80211_HT_CAP_SGI_20 | - IEEE80211_HT_CAP_SGI_40 | - IEEE80211_HT_CAP_TX_STBC | - IEEE80211_HT_CAP_RX_STBC | - IEEE80211_HT_CAP_PSMP_SUPPORT; - spec->ht.ampdu_factor = 3; - spec->ht.ampdu_density = 4; - spec->ht.mcs.tx_params = - IEEE80211_HT_MCS_TX_DEFINED | - IEEE80211_HT_MCS_TX_RX_DIFF | - ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) << - IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); - - switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) { - case 3: - spec->ht.mcs.rx_mask[2] = 0xff; - case 2: - spec->ht.mcs.rx_mask[1] = 0xff; - case 1: - spec->ht.mcs.rx_mask[0] = 0xff; - spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */ - break; - } - - /* - * Create channel information array - */ - info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - spec->channels_info = info; - - tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); - tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); - - for (i = 0; i < 14; i++) { - info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]); - info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]); - } - - if (spec->num_channels > 14) { - tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1); - tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); - - for (i = 14; i < spec->num_channels; i++) { - info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]); - info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]); - } - } - - return 0; -} - static const struct rt2800_ops rt2800pci_rt2800_ops = { .register_read = rt2x00pci_register_read, .register_write = rt2x00pci_register_write, @@ -1331,7 +1143,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize hw specifications. */ - retval = rt2800pci_probe_hw_mode(rt2x00dev); + retval = rt2800_probe_hw_mode(rt2x00dev); if (retval) return retval; diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index e86858a..67bae36 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -672,215 +672,6 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) return rt2800_validate_eeprom(rt2x00dev); } -/* - * RF value list for rt2870 - * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750) - */ -static const struct rf_channel rf_vals[] = { - { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b }, - { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f }, - { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b }, - { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f }, - { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b }, - { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f }, - { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b }, - { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f }, - { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b }, - { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f }, - { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b }, - { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f }, - { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b }, - { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 }, - { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 }, - { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 }, - { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 }, - { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b }, - { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b }, - { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 }, - { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 }, - { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b }, - { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 }, - { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 }, - { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 }, - - /* 802.11 HyperLan 2 */ - { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, - { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, - { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 }, - { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 }, - { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, - { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, - { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, - { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 }, - { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 }, - { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 }, - { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b }, - { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 }, - { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b }, - { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 }, - { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b }, - { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 }, - - /* 802.11 UNII */ - { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 }, - { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 }, - { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f }, - { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f }, - { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, - { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, - { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, - { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f }, - { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 }, - { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 }, - { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f }, - - /* 802.11 Japan */ - { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, - { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 }, - { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b }, - { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 }, - { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 }, - { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b }, - { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, -}; - -/* - * RF value list for rt3070 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_3070[] = { - {1, 241, 2, 2 }, - {2, 241, 2, 7 }, - {3, 242, 2, 2 }, - {4, 242, 2, 7 }, - {5, 243, 2, 2 }, - {6, 243, 2, 7 }, - {7, 244, 2, 2 }, - {8, 244, 2, 7 }, - {9, 245, 2, 2 }, - {10, 245, 2, 7 }, - {11, 246, 2, 2 }, - {12, 246, 2, 7 }, - {13, 247, 2, 2 }, - {14, 248, 2, 4 }, -}; - -static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct rt2x00_chip *chip = &rt2x00dev->chip; - struct hw_mode_spec *spec = &rt2x00dev->spec; - struct channel_info *info; - char *tx_power1; - char *tx_power2; - unsigned int i; - u16 eeprom; - - /* - * Initialize all hw fields. - */ - rt2x00dev->hw->flags = - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_PS_NULLFUNC_STACK; - - if (rt2x00_intf_is_usb(rt2x00dev)) - rt2x00dev->hw->extra_tx_headroom = - TXINFO_DESC_SIZE + TXWI_DESC_SIZE; - - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Initialize hw_mode information. - */ - spec->supported_bands = SUPPORT_BAND_2GHZ; - spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - - if (rt2x00_rf(chip, RF2820) || - rt2x00_rf(chip, RF2720)) { - spec->num_channels = 14; - spec->channels = rf_vals; - } else if (rt2x00_rf(chip, RF2850) || - rt2x00_rf(chip, RF2750)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; - spec->num_channels = ARRAY_SIZE(rf_vals); - spec->channels = rf_vals; - } else if (rt2x00_intf_is_usb(rt2x00dev) && - (rt2x00_rf(chip, RF3020) || - rt2x00_rf(chip, RF2020))) { - spec->num_channels = ARRAY_SIZE(rf_vals_3070); - spec->channels = rf_vals_3070; - } - - /* - * Initialize HT information. - */ - spec->ht.ht_supported = true; - spec->ht.cap = - IEEE80211_HT_CAP_SUP_WIDTH_20_40 | - IEEE80211_HT_CAP_GRN_FLD | - IEEE80211_HT_CAP_SGI_20 | - IEEE80211_HT_CAP_SGI_40 | - IEEE80211_HT_CAP_TX_STBC | - IEEE80211_HT_CAP_RX_STBC | - IEEE80211_HT_CAP_PSMP_SUPPORT; - spec->ht.ampdu_factor = 3; - spec->ht.ampdu_density = 4; - spec->ht.mcs.tx_params = - IEEE80211_HT_MCS_TX_DEFINED | - IEEE80211_HT_MCS_TX_RX_DIFF | - ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) << - IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); - - switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) { - case 3: - spec->ht.mcs.rx_mask[2] = 0xff; - case 2: - spec->ht.mcs.rx_mask[1] = 0xff; - case 1: - spec->ht.mcs.rx_mask[0] = 0xff; - spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */ - break; - } - - /* - * Create channel information array - */ - info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - spec->channels_info = info; - - tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); - tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); - - for (i = 0; i < 14; i++) { - info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]); - info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]); - } - - if (spec->num_channels > 14) { - tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1); - tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); - - for (i = 14; i < spec->num_channels; i++) { - info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]); - info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]); - } - } - - return 0; -} - static const struct rt2800_ops rt2800usb_rt2800_ops = { .register_read = rt2x00usb_register_read, .register_write = rt2x00usb_register_write, @@ -912,7 +703,7 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize hw specifications. */ - retval = rt2800usb_probe_hw_mode(rt2x00dev); + retval = rt2800_probe_hw_mode(rt2x00dev); if (retval) return retval; -- cgit v0.10.2 From 4116cb483ec148e30f70408ad0600304a5de2a3c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 8 Nov 2009 14:39:40 +0100 Subject: rt2800usb: fix RX descriptor naming Rename RXD_W0_* defines to RXINFO_W0_* ones to match naming used for TX descriptor and by the vendor driver. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Ivo van Doorn Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 67bae36..a6b0484 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -594,16 +594,16 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, rt2x00_desc_read(rxwi, 2, &rxwi2); rt2x00_desc_read(rxwi, 3, &rxwi3); - if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR)) + if (rt2x00_get_field32(rxd0, RXINFO_W0_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF); rxdesc->cipher_status = - rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR); + rt2x00_get_field32(rxd0, RXINFO_W0_CIPHER_ERROR); } - if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) { + if (rt2x00_get_field32(rxd0, RXINFO_W0_DECRYPTED)) { /* * Hardware has stripped IV/EIV data from 802.11 frame during * decryption. Unfortunately the descriptor doesn't contain @@ -618,10 +618,10 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, rxdesc->flags |= RX_FLAG_MMIC_ERROR; } - if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS)) + if (rt2x00_get_field32(rxd0, RXINFO_W0_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; - if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD)) { + if (rt2x00_get_field32(rxd0, RXINFO_W0_L2PAD)) { rxdesc->dev_flags |= RXDONE_L2PAD; skbdesc->flags |= SKBDESC_L2_PADDED; } diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h index c9d7d40..8f31744 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.h +++ b/drivers/net/wireless/rt2x00/rt2800usb.h @@ -111,25 +111,25 @@ * AMSDU: rx with 802.3 header, not 802.11 header. */ -#define RXD_W0_BA FIELD32(0x00000001) -#define RXD_W0_DATA FIELD32(0x00000002) -#define RXD_W0_NULLDATA FIELD32(0x00000004) -#define RXD_W0_FRAG FIELD32(0x00000008) -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000010) -#define RXD_W0_MULTICAST FIELD32(0x00000020) -#define RXD_W0_BROADCAST FIELD32(0x00000040) -#define RXD_W0_MY_BSS FIELD32(0x00000080) -#define RXD_W0_CRC_ERROR FIELD32(0x00000100) -#define RXD_W0_CIPHER_ERROR FIELD32(0x00000600) -#define RXD_W0_AMSDU FIELD32(0x00000800) -#define RXD_W0_HTC FIELD32(0x00001000) -#define RXD_W0_RSSI FIELD32(0x00002000) -#define RXD_W0_L2PAD FIELD32(0x00004000) -#define RXD_W0_AMPDU FIELD32(0x00008000) -#define RXD_W0_DECRYPTED FIELD32(0x00010000) -#define RXD_W0_PLCP_RSSI FIELD32(0x00020000) -#define RXD_W0_CIPHER_ALG FIELD32(0x00040000) -#define RXD_W0_LAST_AMSDU FIELD32(0x00080000) -#define RXD_W0_PLCP_SIGNAL FIELD32(0xfff00000) +#define RXINFO_W0_BA FIELD32(0x00000001) +#define RXINFO_W0_DATA FIELD32(0x00000002) +#define RXINFO_W0_NULLDATA FIELD32(0x00000004) +#define RXINFO_W0_FRAG FIELD32(0x00000008) +#define RXINFO_W0_UNICAST_TO_ME FIELD32(0x00000010) +#define RXINFO_W0_MULTICAST FIELD32(0x00000020) +#define RXINFO_W0_BROADCAST FIELD32(0x00000040) +#define RXINFO_W0_MY_BSS FIELD32(0x00000080) +#define RXINFO_W0_CRC_ERROR FIELD32(0x00000100) +#define RXINFO_W0_CIPHER_ERROR FIELD32(0x00000600) +#define RXINFO_W0_AMSDU FIELD32(0x00000800) +#define RXINFO_W0_HTC FIELD32(0x00001000) +#define RXINFO_W0_RSSI FIELD32(0x00002000) +#define RXINFO_W0_L2PAD FIELD32(0x00004000) +#define RXINFO_W0_AMPDU FIELD32(0x00008000) +#define RXINFO_W0_DECRYPTED FIELD32(0x00010000) +#define RXINFO_W0_PLCP_RSSI FIELD32(0x00020000) +#define RXINFO_W0_CIPHER_ALG FIELD32(0x00040000) +#define RXINFO_W0_LAST_AMSDU FIELD32(0x00080000) +#define RXINFO_W0_PLCP_SIGNAL FIELD32(0xfff00000) #endif /* RT2800USB_H */ -- cgit v0.10.2 From 30e840346c516ad4e36f710fa485933ccc7afa66 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 8 Nov 2009 14:39:48 +0100 Subject: rt2800: add eFuse EEPROM support code to rt2800lib eFuse EEPROM is used also by USB chips (i.e. RT3070) so move the needed code from rt2800pci to rt2800lib. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index d9b6a72..74fb525 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -362,6 +362,35 @@ #define RF_CSR_CFG_BUSY FIELD32(0x00020000) /* + * EFUSE_CSR: RT30x0 EEPROM + */ +#define EFUSE_CTRL 0x0580 +#define EFUSE_CTRL_ADDRESS_IN FIELD32(0x03fe0000) +#define EFUSE_CTRL_MODE FIELD32(0x000000c0) +#define EFUSE_CTRL_KICK FIELD32(0x40000000) +#define EFUSE_CTRL_PRESENT FIELD32(0x80000000) + +/* + * EFUSE_DATA0 + */ +#define EFUSE_DATA0 0x0590 + +/* + * EFUSE_DATA1 + */ +#define EFUSE_DATA1 0x0594 + +/* + * EFUSE_DATA2 + */ +#define EFUSE_DATA2 0x0598 + +/* + * EFUSE_DATA3 + */ +#define EFUSE_DATA3 0x059c + +/* * MAC Control/Status Registers(CSR). * Some values are set in TU, whereas 1 TU == 1024 us. */ diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index d7771ea..f207e9f 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1659,6 +1659,49 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) } EXPORT_SYMBOL_GPL(rt2800_init_rfcsr); +int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, EFUSE_CTRL, ®); + + return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT); +} +EXPORT_SYMBOL_GPL(rt2800_efuse_detect); + +static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, EFUSE_CTRL, ®); + rt2x00_set_field32(®, EFUSE_CTRL_ADDRESS_IN, i); + rt2x00_set_field32(®, EFUSE_CTRL_MODE, 0); + rt2x00_set_field32(®, EFUSE_CTRL_KICK, 1); + rt2800_register_write(rt2x00dev, EFUSE_CTRL, reg); + + /* Wait until the EEPROM has been loaded */ + rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, ®); + + /* Apparently the data is read from end to start */ + rt2800_register_read(rt2x00dev, EFUSE_DATA3, + (u32 *)&rt2x00dev->eeprom[i]); + rt2800_register_read(rt2x00dev, EFUSE_DATA2, + (u32 *)&rt2x00dev->eeprom[i + 2]); + rt2800_register_read(rt2x00dev, EFUSE_DATA1, + (u32 *)&rt2x00dev->eeprom[i + 4]); + rt2800_register_read(rt2x00dev, EFUSE_DATA0, + (u32 *)&rt2x00dev->eeprom[i + 6]); +} + +void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + + for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8) + rt2800_efuse_read(rt2x00dev, i); +} +EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse); + int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) { u16 word; diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index 2aa15f2..7c79011 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -129,6 +129,8 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev); int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev); int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev); +int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev); +void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev); int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev); int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev); int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index e8fe2ea..6f151d0 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -147,44 +147,12 @@ static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) static int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) { - u32 reg; - - rt2800_register_read(rt2x00dev, EFUSE_CTRL, ®); - - return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT); + return rt2800_efuse_detect(rt2x00dev); } -static void rt2800pci_efuse_read(struct rt2x00_dev *rt2x00dev, - unsigned int i) -{ - u32 reg; - - rt2800_register_read(rt2x00dev, EFUSE_CTRL, ®); - rt2x00_set_field32(®, EFUSE_CTRL_ADDRESS_IN, i); - rt2x00_set_field32(®, EFUSE_CTRL_MODE, 0); - rt2x00_set_field32(®, EFUSE_CTRL_KICK, 1); - rt2800_register_write(rt2x00dev, EFUSE_CTRL, reg); - - /* Wait until the EEPROM has been loaded */ - rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, ®); - - /* Apparently the data is read from end to start */ - rt2800_register_read(rt2x00dev, EFUSE_DATA3, - (u32 *)&rt2x00dev->eeprom[i]); - rt2800_register_read(rt2x00dev, EFUSE_DATA2, - (u32 *)&rt2x00dev->eeprom[i + 2]); - rt2800_register_read(rt2x00dev, EFUSE_DATA1, - (u32 *)&rt2x00dev->eeprom[i + 4]); - rt2800_register_read(rt2x00dev, EFUSE_DATA0, - (u32 *)&rt2x00dev->eeprom[i + 6]); -} - -static void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) { - unsigned int i; - - for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8) - rt2800pci_efuse_read(rt2x00dev, i); + rt2800_read_eeprom_efuse(rt2x00dev); } #else static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h index 8f944ee..b866dd0 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.h +++ b/drivers/net/wireless/rt2x00/rt2800pci.h @@ -56,35 +56,6 @@ #define TX_DTX_IDX(__x) TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET) /* - * EFUSE_CSR: RT3090 EEPROM - */ -#define EFUSE_CTRL 0x0580 -#define EFUSE_CTRL_ADDRESS_IN FIELD32(0x03fe0000) -#define EFUSE_CTRL_MODE FIELD32(0x000000c0) -#define EFUSE_CTRL_KICK FIELD32(0x40000000) -#define EFUSE_CTRL_PRESENT FIELD32(0x80000000) - -/* - * EFUSE_DATA0 - */ -#define EFUSE_DATA0 0x0590 - -/* - * EFUSE_DATA1 - */ -#define EFUSE_DATA1 0x0594 - -/* - * EFUSE_DATA2 - */ -#define EFUSE_DATA2 0x0598 - -/* - * EFUSE_DATA3 - */ -#define EFUSE_DATA3 0x059c - -/* * 8051 firmware image. */ #define FIRMWARE_RT2860 "rt2860.bin" -- cgit v0.10.2 From 40beee5c15a816bf77747e15940ac3b97229faf4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 8 Nov 2009 14:39:55 +0100 Subject: rt2800usb: add eFuse EEPROM support It is needed for at least RT3070 chip. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Ivo van Doorn Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index a6b0484..54afbc8 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -667,7 +667,11 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, */ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) { - rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); + if (rt2800_efuse_detect(rt2x00dev)) + rt2800_read_eeprom_efuse(rt2x00dev); + else + rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, + EEPROM_SIZE); return rt2800_validate_eeprom(rt2x00dev); } -- cgit v0.10.2 From 6aefbfa0204b1dab4b9f23ca30f8840ba0d9134a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 8 Nov 2009 14:43:35 +0100 Subject: rt2500usb: remove dead link tuning code Link tuning code from the legacy rt2570 driver turned out to be harmful and got disabled by the commit d06193f ("rt2x00: Disable link tuning in rt2500usb") in August 2008. There is no reason to keep this dead code any longer so remove it (it can still be retrieved from the git history if necessary). Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 22dd6d9..6acd8e8 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -716,139 +716,6 @@ static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev, } /* - * NOTE: This function is directly ported from legacy driver, but - * despite it being declared it was never called. Although link tuning - * sounds like a good idea, and usually works well for the other drivers, - * it does _not_ work with rt2500usb. Enabling this function will result - * in TX capabilities only until association kicks in. Immediately - * after the successful association all TX frames will be kept in the - * hardware queue and never transmitted. - */ -#if 0 -static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); - u16 bbp_thresh; - u16 vgc_bound; - u16 sens; - u16 r24; - u16 r25; - u16 r61; - u16 r17_sens; - u8 r17; - u8 up_bound; - u8 low_bound; - - /* - * Read current r17 value, as well as the sensitivity values - * for the r17 register. - */ - rt2500usb_bbp_read(rt2x00dev, 17, &r17); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound); - up_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER); - low_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCLOWER); - - /* - * If we are not associated, we should go straight to the - * dynamic CCA tuning. - */ - if (!rt2x00dev->intf_associated) - goto dynamic_cca_tune; - - /* - * Determine the BBP tuning threshold and correctly - * set BBP 24, 25 and 61. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh); - bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61); - - if ((rssi + bbp_thresh) > 0) { - r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH); - r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH); - r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH); - } else { - r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW); - r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW); - r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW); - } - - rt2500usb_bbp_write(rt2x00dev, 24, r24); - rt2500usb_bbp_write(rt2x00dev, 25, r25); - rt2500usb_bbp_write(rt2x00dev, 61, r61); - - /* - * A too low RSSI will cause too much false CCA which will - * then corrupt the R17 tuning. To remidy this the tuning should - * be stopped (While making sure the R17 value will not exceed limits) - */ - if (rssi >= -40) { - if (r17 != 0x60) - rt2500usb_bbp_write(rt2x00dev, 17, 0x60); - return; - } - - /* - * Special big-R17 for short distance - */ - if (rssi >= -58) { - sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW); - if (r17 != sens) - rt2500usb_bbp_write(rt2x00dev, 17, sens); - return; - } - - /* - * Special mid-R17 for middle distance - */ - if (rssi >= -74) { - sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH); - if (r17 != sens) - rt2500usb_bbp_write(rt2x00dev, 17, sens); - return; - } - - /* - * Leave short or middle distance condition, restore r17 - * to the dynamic tuning range. - */ - low_bound = 0x32; - if (rssi < -77) - up_bound -= (-77 - rssi); - - if (up_bound < low_bound) - up_bound = low_bound; - - if (r17 > up_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, up_bound); - rt2x00dev->link.vgc_level = up_bound; - return; - } - -dynamic_cca_tune: - - /* - * R17 is inside the dynamic tuning range, - * start tuning the link based on the false cca counter. - */ - if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, ++r17); - rt2x00dev->link.vgc_level = r17; - } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, --r17); - rt2x00dev->link.vgc_level = r17; - } -} -#else -#define rt2500usb_link_tuner NULL -#endif - -/* * Initialization functions. */ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev) @@ -1910,7 +1777,6 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { .rfkill_poll = rt2500usb_rfkill_poll, .link_stats = rt2500usb_link_stats, .reset_tuner = rt2500usb_reset_tuner, - .link_tuner = rt2500usb_link_tuner, .write_tx_desc = rt2500usb_write_tx_desc, .write_tx_data = rt2x00usb_write_tx_data, .write_beacon = rt2500usb_write_beacon, -- cgit v0.10.2 From 9c9a0d145fee73b5e821bb460732ac2a66c680b3 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Sun, 8 Nov 2009 16:39:55 +0100 Subject: rt2x00: Update copyright statements. As mentioned on the linux-wireless mailing list, the current copyright statements in the rt2x00 are meaningless, as the rt2x00 project is not even a formal legal entity. Therefore it is better to replace the existing copyright statements with copyright statements for the people that actually wrote the code. Note: Updated to the best of my knowledge with respect to who contributed considerable amounts of code. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn CC: Bartlomiej Zolnierkiewicz Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 798f625..0f912f5 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index ccd6441..6c21ef6 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 2e872ac..6618cbd 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h index 54d3795..b007567 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.h +++ b/drivers/net/wireless/rt2x00/rt2500pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 6acd8e8..bb64473 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index b01edca..341a704 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 74fb525..c5fe867 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -1,5 +1,12 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn + Copyright (C) 2009 Alban Browaeys + Copyright (C) 2009 Felix Fietkau + Copyright (C) 2009 Luis Correia + Copyright (C) 2009 Mattias Nissler + Copyright (C) 2009 Mark Asselstine + Copyright (C) 2009 Xose Vazquez Perez + Copyright (C) 2009 Bart Zolnierkiewicz This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index f207e9f..a0d5901 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1,9 +1,14 @@ /* - Copyright (C) 2009 Bartlomiej Zolnierkiewicz - - Based on the original rt2800pci.c and rt2800usb.c: - - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2009 Bartlomiej Zolnierkiewicz + + Based on the original rt2800pci.c and rt2800usb.c. + Copyright (C) 2009 Ivo van Doorn + Copyright (C) 2009 Alban Browaeys + Copyright (C) 2009 Felix Fietkau + Copyright (C) 2009 Luis Correia + Copyright (C) 2009 Mattias Nissler + Copyright (C) 2009 Mark Asselstine + Copyright (C) 2009 Xose Vazquez Perez This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 6f151d0..c7a596f 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1,5 +1,12 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2009 Ivo van Doorn + Copyright (C) 2009 Alban Browaeys + Copyright (C) 2009 Felix Fietkau + Copyright (C) 2009 Luis Correia + Copyright (C) 2009 Mattias Nissler + Copyright (C) 2009 Mark Asselstine + Copyright (C) 2009 Xose Vazquez Perez + Copyright (C) 2009 Bart Zolnierkiewicz This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h index b866dd0..afc8e7d 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.h +++ b/drivers/net/wireless/rt2x00/rt2800pci.h @@ -1,5 +1,12 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2009 Ivo van Doorn + Copyright (C) 2009 Alban Browaeys + Copyright (C) 2009 Felix Fietkau + Copyright (C) 2009 Luis Correia + Copyright (C) 2009 Mattias Nissler + Copyright (C) 2009 Mark Asselstine + Copyright (C) 2009 Xose Vazquez Perez + Copyright (C) 2009 Bart Zolnierkiewicz This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 54afbc8..b57999b 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1,5 +1,9 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2009 Ivo van Doorn + Copyright (C) 2009 Mattias Nissler + Copyright (C) 2009 Felix Fietkau + Copyright (C) 2009 Xose Vazquez Perez + Copyright (C) 2009 Axel Kollhofer This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h index 8f31744..1e4340a 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.h +++ b/drivers/net/wireless/rt2x00/rt2800usb.h @@ -1,5 +1,9 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2009 Ivo van Doorn + Copyright (C) 2009 Mattias Nissler + Copyright (C) 2009 Felix Fietkau + Copyright (C) 2009 Xose Vazquez Perez + Copyright (C) 2009 Axel Kollhofer This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 1a84574..5a1b161 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn + Copyright (C) 2004 - 2009 Gertjan van Wingerde This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 40a201e..098315a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index de36837d..d291c78 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 7b3ee8c..e6b0fbb 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.h b/drivers/net/wireless/rt2x00/rt2x00debug.h index 035cbc9..fa11409 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.h +++ b/drivers/net/wireless/rt2x00/rt2x00debug.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 00bfb22..6c6d0ac 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00dump.h b/drivers/net/wireless/rt2x00/rt2x00dump.h index fdedb51..727019a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dump.h +++ b/drivers/net/wireless/rt2x00/rt2x00dump.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c index d2deea2..34beb00 100644 --- a/drivers/net/wireless/rt2x00/rt2x00firmware.c +++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn + Copyright (C) 2004 - 2009 Gertjan van Wingerde This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c index e3cec83..1056c92 100644 --- a/drivers/net/wireless/rt2x00/rt2x00ht.c +++ b/drivers/net/wireless/rt2x00/rt2x00ht.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c index 49671fe..ca585e3 100644 --- a/drivers/net/wireless/rt2x00/rt2x00leds.c +++ b/drivers/net/wireless/rt2x00/rt2x00leds.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.h b/drivers/net/wireless/rt2x00/rt2x00leds.h index 8e03c04..3b46f0c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00leds.h +++ b/drivers/net/wireless/rt2x00/rt2x00leds.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index e1701657..c1f48ac 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn + Copyright (C) 2004 - 2009 Gertjan van Wingerde This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index f918f29..0efbf5a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 929b85f..eed093d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index ece70d7..0feb4d0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index ae33eeb..d4f9449 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 577029e..02972a0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn + Copyright (C) 2004 - 2009 Gertjan van Wingerde This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index a5591fb..97c7895 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index 983e52e..603bfc0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.c b/drivers/net/wireless/rt2x00/rt2x00soc.c index 4abcfa6..19e684f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00soc.c +++ b/drivers/net/wireless/rt2x00/rt2x00soc.c @@ -1,5 +1,6 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn + Copyright (C) 2004 - 2009 Felix Fietkau This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.h b/drivers/net/wireless/rt2x00/rt2x00soc.h index 5cf114a..8a34166 100644 --- a/drivers/net/wireless/rt2x00/rt2x00soc.h +++ b/drivers/net/wireless/rt2x00/rt2x00soc.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index aa6c31d..0a751e7 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index 1c9d6ca..3da6841 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index b20e3ea..ea8a86f 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index 93eb699..6f33f7f 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 14e7bb21..7236f01 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index 81fe0be..e783a09 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify -- cgit v0.10.2 From a6ef92ad3588d4e011295bf724f88e7d5b8c0e1b Mon Sep 17 00:00:00 2001 From: Jason Andryuk Date: Sun, 8 Nov 2009 18:58:01 -0500 Subject: at76c50x-usb: Remove mac2str and replace with %pM format specifier. Signed-off-by: Jason Andryuk Acked-by: Kalle Valo Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 0a917e4..be2e596 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -532,20 +532,6 @@ static char *hex2str(void *buf, int len) return ret; } -#define MAC2STR_BUFFERS 4 - -static inline char *mac2str(u8 *mac) -{ - static atomic_t a = ATOMIC_INIT(0); - static char bufs[MAC2STR_BUFFERS][6 * 3]; - char *str; - - str = bufs[atomic_inc_return(&a) & (MAC2STR_BUFFERS - 1)]; - sprintf(str, "%02x:%02x:%02x:%02x:%02x:%02x", - mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); - return str; -} - /* LED trigger */ static int tx_activity; static void at76_ledtrig_tx_timerfunc(unsigned long data); @@ -981,13 +967,13 @@ static void at76_dump_mib_mac_addr(struct at76_priv *priv) goto exit; } - at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %s res 0x%x 0x%x", + at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %pM res 0x%x 0x%x", wiphy_name(priv->hw->wiphy), - mac2str(m->mac_addr), m->res[0], m->res[1]); + m->mac_addr, m->res[0], m->res[1]); for (i = 0; i < ARRAY_SIZE(m->group_addr); i++) - at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %s, " + at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %pM, " "status %d", wiphy_name(priv->hw->wiphy), i, - mac2str(m->group_addr[i]), m->group_addr_status[i]); + m->group_addr[i], m->group_addr_status[i]); exit: kfree(m); } @@ -1050,7 +1036,7 @@ static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) at76_dbg(DBG_MIB, "%s: MIB MAC_MGMT: beacon_period %d CFP_max_duration " "%d medium_occupancy_limit %d station_id 0x%x ATIM_window %d " "CFP_mode %d privacy_opt_impl %d DTIM_period %d CFP_period %d " - "current_bssid %s current_essid %s current_bss_type %d " + "current_bssid %pM current_essid %s current_bss_type %d " "pm_mode %d ibss_change %d res %d " "multi_domain_capability_implemented %d " "international_roaming %d country_string %.3s", @@ -1059,7 +1045,7 @@ static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) le16_to_cpu(m->medium_occupancy_limit), le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window), m->CFP_mode, m->privacy_option_implemented, m->DTIM_period, - m->CFP_period, mac2str(m->current_bssid), + m->CFP_period, m->current_bssid, hex2str(m->current_essid, IW_ESSID_MAX_SIZE), m->current_bss_type, m->power_mgmt_mode, m->ibss_change, m->res, m->multi_domain_capability_implemented, @@ -1088,7 +1074,7 @@ static void at76_dump_mib_mac(struct at76_priv *priv) "cwmin %d cwmax %d short_retry_time %d long_retry_time %d " "scan_type %d scan_channel %d probe_delay %u " "min_channel_time %d max_channel_time %d listen_int %d " - "desired_ssid %s desired_bssid %s desired_bsstype %d", + "desired_ssid %s desired_bssid %pM desired_bsstype %d", wiphy_name(priv->hw->wiphy), le32_to_cpu(m->max_tx_msdu_lifetime), le32_to_cpu(m->max_rx_lifetime), @@ -1100,7 +1086,7 @@ static void at76_dump_mib_mac(struct at76_priv *priv) le16_to_cpu(m->max_channel_time), le16_to_cpu(m->listen_interval), hex2str(m->desired_ssid, IW_ESSID_MAX_SIZE), - mac2str(m->desired_bssid), m->desired_bsstype); + m->desired_bssid, m->desired_bsstype); exit: kfree(m); } @@ -2292,9 +2278,9 @@ static int at76_init_new_device(struct at76_priv *priv, priv->mac80211_registered = 1; - printk(KERN_INFO "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n", + printk(KERN_INFO "%s: USB %s, MAC %pM, firmware %d.%d.%d-%d\n", wiphy_name(priv->hw->wiphy), - dev_name(&interface->dev), mac2str(priv->mac_addr), + dev_name(&interface->dev), priv->mac_addr, priv->fw_version.major, priv->fw_version.minor, priv->fw_version.patch, priv->fw_version.build); printk(KERN_INFO "%s: regulatory domain 0x%02x: %s\n", -- cgit v0.10.2 From 13b409cc8c1614090f256729ee0038438a6946f7 Mon Sep 17 00:00:00 2001 From: Jason Andryuk Date: Sun, 8 Nov 2009 19:02:19 -0500 Subject: at76c50x-usb: Supply additional parameters to at76_start_monitor scan request For my Linksys WUSB11 at76c503-i3861 device, scanning fails without probe_delay, min_channel_time, and max_channel_time specified for the scan request. These values were found by checking scan requests from the at76_usb driver. Signed-off-by: Jason Andryuk Acked-by: Kalle Valo Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index be2e596..2517364 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -1188,6 +1188,9 @@ static int at76_start_monitor(struct at76_priv *priv) scan.channel = priv->channel; scan.scan_type = SCAN_TYPE_PASSIVE; scan.international_scan = 0; + scan.min_channel_time = cpu_to_le16(priv->scan_min_time); + scan.max_channel_time = cpu_to_le16(priv->scan_max_time); + scan.probe_delay = cpu_to_le16(0); ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan)); if (ret >= 0) -- cgit v0.10.2 From b34e620faa843d746400e324580e9a9efd457e4d Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 9 Nov 2009 09:45:50 +0100 Subject: rt2x00: fix some typos and punctuation in comments fix some typos and punctuation in comments Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Jiri Kosina Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index ea8a86f..6e46135 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -51,7 +51,7 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); * These indirect registers work with busy bits, * and we will try maximal REGISTER_BUSY_COUNT times to access * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, + * between each attempt. When the busy bit is still set at that time, * the access attempt is considered to have failed, * and we will print an error. */ @@ -386,7 +386,7 @@ static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev, * The driver does not support the IV/EIV generation * in hardware. However it doesn't support the IV/EIV * inside the ieee80211 frame either, but requires it - * to be provided seperately for the descriptor. + * to be provided separately for the descriptor. * rt2x00lib will cut the IV/EIV data out of all frames * given to us by mac80211, but we must tell mac80211 * to generate the IV/EIV data. @@ -397,7 +397,7 @@ static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev, /* * SEC_CSR0 contains only single-bit fields to indicate * a particular key is valid. Because using the FIELD32() - * defines directly will cause a lot of overhead we use + * defines directly will cause a lot of overhead, we use * a calculation to determine the correct bit directly. */ mask = 1 << key->hw_key_idx; @@ -425,11 +425,11 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, /* * rt2x00lib can't determine the correct free * key_idx for pairwise keys. We have 2 registers - * with key valid bits. The goal is simple, read - * the first register, if that is full move to + * with key valid bits. The goal is simple: read + * the first register. If that is full, move to * the next register. - * When both registers are full, we drop the key, - * otherwise we use the first invalid entry. + * When both registers are full, we drop the key. + * Otherwise, we use the first invalid entry. */ rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®); if (reg && reg == ~0) { @@ -464,8 +464,8 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, &addr_entry, sizeof(addr_entry)); /* - * Enable pairwise lookup table for given BSS idx, - * without this received frames will not be decrypted + * Enable pairwise lookup table for given BSS idx. + * Without this, received frames will not be decrypted * by the hardware. */ rt2x00pci_register_read(rt2x00dev, SEC_CSR4, ®); @@ -487,7 +487,7 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, /* * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate * a particular key is valid. Because using the FIELD32() - * defines directly will cause a lot of overhead we use + * defines directly will cause a lot of overhead, we use * a calculation to determine the correct bit directly. */ if (key->hw_key_idx < 32) { @@ -556,7 +556,7 @@ static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev, if (flags & CONFIG_UPDATE_TYPE) { /* * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear + * For the Beacon base registers, we only need to clear * the first byte since that byte contains the VALID and OWNER * bits which (when set to 0) will invalidate the entire beacon. */ @@ -1168,8 +1168,8 @@ static int rt61pci_check_firmware(struct rt2x00_dev *rt2x00dev, return FW_BAD_LENGTH; /* - * The last 2 bytes in the firmware array are the crc checksum itself, - * this means that we should never pass those 2 bytes to the crc + * The last 2 bytes in the firmware array are the crc checksum itself. + * This means that we should never pass those 2 bytes to the crc * algorithm. */ fw_crc = (data[len - 2] << 8 | data[len - 1]); @@ -1986,7 +1986,7 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry, /* * Hardware has stripped IV/EIV data from 802.11 frame during - * decryption. It has provided the data seperately but rt2x00lib + * decryption. It has provided the data separately but rt2x00lib * should decide if it should be reinserted. */ rxdesc->flags |= RX_FLAG_IV_STRIPPED; @@ -2042,7 +2042,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) * During each loop we will compare the freshly read * STA_CSR4 register value with the value read from * the previous loop. If the 2 values are equal then - * we should stop processing because the chance it + * we should stop processing because the chance is * quite big that the device has been unplugged and * we risk going into an endless loop. */ @@ -2330,7 +2330,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags); /* - * Detect if this device has an hardware controlled radio. + * Detect if this device has a hardware controlled radio. */ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); @@ -2355,7 +2355,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); /* - * When working with a RF2529 chip without double antenna + * When working with a RF2529 chip without double antenna, * the antenna settings should be gathered from the NIC * eeprom word. */ @@ -2668,7 +2668,7 @@ static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, /* * We only need to perform additional register initialization - * for WMM queues/ + * for WMM queues. */ if (queue_idx >= 4) return 0; -- cgit v0.10.2 From e5d6eb8305a4c116fc94ce28b8136c538c92442f Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 9 Nov 2009 16:03:22 -0500 Subject: mac80211: fix max HT rate processing on mac80211 The max MCS index is 76, fix the higher check to allow through frames received at MCS 76. This is a non-issue for current drivers as MCS 76 is only possible with a device supporting 4 spatial streams. While at it change the WARN_ON() on invalid HT rates to a WARN() to provide more useful information. This will help debug issues when the driver is passing up a bogus HT rate value. The rate must map to a valid MCS index which can be any of the values in the set [0 - 76] (inclusive). Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 7647836..006cf89 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2441,9 +2441,21 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb) goto drop; if (status->flag & RX_FLAG_HT) { - /* rate_idx is MCS index */ - if (WARN_ON(status->rate_idx < 0 || - status->rate_idx >= 76)) + /* + * rate_idx is MCS index, which can be [0-76] as documented on: + * + * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n + * + * Anything else would be some sort of driver or hardware error. + * The driver should catch hardware errors. + */ + if (WARN((status->rate_idx < 0 || + status->rate_idx > 76), + "Rate marked as an HT rate but passed " + "status->rate_idx is not " + "an MCS index [0-76]: %d (0x%02x)\n", + status->rate_idx, + status->rate_idx)) goto drop; /* HT rates are not in the table - use the highest legacy rate * for now since other parts of mac80211 may not yet be fully -- cgit v0.10.2 From 41a2617064a8458178ccdf31ed2be2b4eade4a2a Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 9 Nov 2009 22:59:04 +0100 Subject: rt2x00: Fix typo in rf programming of rt2800lib. Fix a type in rt2800_config_channel_rt3x. The second write to RF register 2 should be to RF register 3. This is confirmed by the legacy Ralink code. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index a0d5901..eb6d129 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -774,7 +774,7 @@ static void rt2800_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, u8 rfcsr; rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1); - rt2800_rfcsr_write(rt2x00dev, 2, rf->rf3); + rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3); rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); -- cgit v0.10.2 From 90a5e16992fa6105f7ebf3f29f5cf5feb1bbf7dc Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Wed, 11 Nov 2009 00:01:31 +0000 Subject: mac80211: implement RANN processing and forwarding Process the RANN (Root Annoucement) Frame and try to find the HWMP root station by sending a PREQ. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 50c684d..49b1abd 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -554,6 +554,20 @@ struct ieee80211_tim_ie { u8 virtual_map[1]; } __attribute__ ((packed)); +/** + * struct ieee80211_rann_ie + * + * This structure refers to "Root Announcement information element" + */ +struct ieee80211_rann_ie { + u8 rann_flags; + u8 rann_hopcount; + u8 rann_ttl; + u8 rann_addr[6]; + u32 rann_seq; + u32 rann_metric; +} __attribute__ ((packed)); + #define WLAN_SA_QUERY_TR_ID_LEN 2 struct ieee80211_mgmt { @@ -1070,6 +1084,7 @@ enum ieee80211_eid { WLAN_EID_PREQ = 68, WLAN_EID_PREP = 69, WLAN_EID_PERR = 70, + WLAN_EID_RANN = 49, /* compatible with FreeBSD */ /* 802.11h */ WLAN_EID_PWR_CONSTRAINT = 32, WLAN_EID_PWR_CAPABILITY = 33, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 19b0c12..2a7d3d4 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -804,6 +804,7 @@ struct ieee802_11_elems { u8 *preq; u8 *prep; u8 *perr; + struct ieee80211_rann_ie *rann; u8 *ch_switch_elem; u8 *country_elem; u8 *pwr_constr_elem; diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index db1a330..7b9dd87 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -28,6 +28,8 @@ /* Reply and forward */ #define MP_F_RF 0x2 +static void mesh_queue_preq(struct mesh_path *, u8); + static inline u32 u32_field_get(u8 *preq_elem, int offset, bool ae) { if (ae) @@ -81,7 +83,8 @@ static inline u32 u32_field_get(u8 *preq_elem, int offset, bool ae) enum mpath_frame_type { MPATH_PREQ = 0, MPATH_PREP, - MPATH_PERR + MPATH_PERR, + MPATH_RANN }; static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, @@ -109,7 +112,8 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, memcpy(mgmt->da, da, ETH_ALEN); memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN); - /* BSSID is left zeroed, wildcard value */ + /* BSSID == SA */ + memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN); mgmt->u.action.category = MESH_PATH_SEL_CATEGORY; mgmt->u.action.u.mesh_action.action_code = MESH_PATH_SEL_ACTION; @@ -126,6 +130,12 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, pos = skb_put(skb, 2 + ie_len); *pos++ = WLAN_EID_PREP; break; + case MPATH_RANN: + mhwmp_dbg("sending RANN from %pM\n", orig_addr); + ie_len = sizeof(struct ieee80211_rann_ie); + pos = skb_put(skb, 2 + ie_len); + *pos++ = WLAN_EID_RANN; + break; default: kfree_skb(skb); return -ENOTSUPP; @@ -143,8 +153,10 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, pos += ETH_ALEN; memcpy(pos, &orig_dsn, 4); pos += 4; - memcpy(pos, &lifetime, 4); - pos += 4; + if (action != MPATH_RANN) { + memcpy(pos, &lifetime, 4); + pos += 4; + } memcpy(pos, &metric, 4); pos += 4; if (action == MPATH_PREQ) { @@ -152,9 +164,11 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, *pos++ = 1; *pos++ = dst_flags; } - memcpy(pos, dst, ETH_ALEN); - pos += ETH_ALEN; - memcpy(pos, &dst_dsn, 4); + if (action != MPATH_RANN) { + memcpy(pos, dst, ETH_ALEN); + pos += ETH_ALEN; + memcpy(pos, &dst_dsn, 4); + } ieee80211_tx_skb(sdata, skb, 1); return 0; @@ -610,6 +624,54 @@ static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata, rcu_read_unlock(); } +static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, + struct ieee80211_rann_ie *rann) +{ + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + struct mesh_path *mpath; + u8 *ta; + u8 ttl, flags, hopcount; + u8 *orig_addr; + u32 orig_dsn, metric; + + ta = mgmt->sa; + ttl = rann->rann_ttl; + if (ttl <= 1) { + ifmsh->mshstats.dropped_frames_ttl++; + return; + } + ttl--; + flags = rann->rann_flags; + orig_addr = rann->rann_addr; + orig_dsn = rann->rann_seq; + hopcount = rann->rann_hopcount; + metric = rann->rann_metric; + mhwmp_dbg("received RANN from %pM\n", orig_addr); + + rcu_read_lock(); + mpath = mesh_path_lookup(orig_addr, sdata); + if (!mpath) { + mesh_path_add(orig_addr, sdata); + mpath = mesh_path_lookup(orig_addr, sdata); + if (!mpath) { + rcu_read_unlock(); + sdata->u.mesh.mshstats.dropped_frames_no_route++; + return; + } + mesh_queue_preq(mpath, + PREQ_Q_F_START | PREQ_Q_F_REFRESH); + } + if (mpath->dsn < orig_dsn) { + mesh_path_sel_frame_tx(MPATH_RANN, flags, orig_addr, + cpu_to_le32(orig_dsn), + 0, NULL, 0, sdata->dev->broadcast, + hopcount, ttl, 0, cpu_to_le32(metric), + 0, sdata); + mpath->dsn = orig_dsn; + } + rcu_read_unlock(); +} void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata, @@ -654,7 +716,8 @@ void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata, return; hwmp_perr_frame_process(sdata, mgmt, elems.perr); } - + if (elems.rann) + hwmp_rann_frame_process(sdata, mgmt, elems.rann); } /** diff --git a/net/mac80211/util.c b/net/mac80211/util.c index aedbaaa..da86e15 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -685,6 +685,10 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, elems->perr = pos; elems->perr_len = elen; break; + case WLAN_EID_RANN: + if (elen >= sizeof(struct ieee80211_rann_ie)) + elems->rann = (void *)pos; + break; case WLAN_EID_CHANNEL_SWITCH: elems->ch_switch_elem = pos; elems->ch_switch_elem_len = elen; -- cgit v0.10.2 From d611f062f4351d8609910648854908fecf58970d Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:50 +0000 Subject: mac80211: update PERR frame format Update the PERR IE frame format according to latest draft (3.03). Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 2fd3e20..1d534c7 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -210,6 +210,11 @@ struct mesh_rmc { #define MESH_PATH_SEL_CATEGORY 32 #define MESH_PATH_SEL_ACTION 0 +/* PERR reason codes */ +#define PEER_RCODE_UNSPECIFIED 11 +#define PERR_RCODE_NO_ROUTE 12 +#define PERR_RCODE_DEST_UNREACH 13 + /* Public interfaces */ /* Various */ int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, @@ -275,8 +280,8 @@ void mesh_mpp_table_grow(void); u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl); /* Mesh paths */ -int mesh_path_error_tx(u8 *dest, __le32 dest_dsn, u8 *ra, - struct ieee80211_sub_if_data *sdata); +int mesh_path_error_tx(u8 ttl, u8 *dest, __le32 dest_dsn, __le16 dest_rcode, + u8 *ra, struct ieee80211_sub_if_data *sdata); void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta); void mesh_path_flush_pending(struct mesh_path *mpath); void mesh_path_tx_pending(struct mesh_path *mpath); diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 7b9dd87..eb4180b 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -27,6 +27,10 @@ #define MP_F_DO 0x1 /* Reply and forward */ #define MP_F_RF 0x2 +/* Unknown Sequence Number */ +#define MP_F_USN 0x01 +/* Reason code Present */ +#define MP_F_RCODE 0x02 static void mesh_queue_preq(struct mesh_path *, u8); @@ -37,6 +41,13 @@ static inline u32 u32_field_get(u8 *preq_elem, int offset, bool ae) return get_unaligned_le32(preq_elem + offset); } +static inline u32 u16_field_get(u8 *preq_elem, int offset, bool ae) +{ + if (ae) + offset += 6; + return get_unaligned_le16(preq_elem + offset); +} + /* HWMP IE processing macros */ #define AE_F (1<<6) #define AE_F_SET(x) (*x & AE_F) @@ -63,8 +74,11 @@ static inline u32 u32_field_get(u8 *preq_elem, int offset, bool ae) #define PREP_IE_DST_ADDR(x) (AE_F_SET(x) ? x + 27 : x + 21) #define PREP_IE_DST_DSN(x) u32_field_get(x, 27, AE_F_SET(x)); -#define PERR_IE_DST_ADDR(x) (x + 2) -#define PERR_IE_DST_DSN(x) u32_field_get(x, 8, 0); +#define PERR_IE_TTL(x) (*(x)) +#define PERR_IE_DST_FLAGS(x) (*(x + 2)) +#define PERR_IE_DST_ADDR(x) (x + 3) +#define PERR_IE_DST_DSN(x) u32_field_get(x, 9, 0); +#define PERR_IE_DST_RCODE(x) u16_field_get(x, 13, 0); #define MSEC_TO_TU(x) (x*1000/1024) #define DSN_GT(x, y) ((long) (y) - (long) (x) < 0) @@ -181,8 +195,8 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, * @dst_dsn: dsn of the broken destination * @ra: node this frame is addressed to */ -int mesh_path_error_tx(u8 *dst, __le32 dst_dsn, u8 *ra, - struct ieee80211_sub_if_data *sdata) +int mesh_path_error_tx(u8 ttl, u8 *dst, __le32 dst_dsn, __le16 dst_rcode, + u8 *ra, struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400); @@ -207,17 +221,29 @@ int mesh_path_error_tx(u8 *dst, __le32 dst_dsn, u8 *ra, /* BSSID is left zeroed, wildcard value */ mgmt->u.action.category = MESH_PATH_SEL_CATEGORY; mgmt->u.action.u.mesh_action.action_code = MESH_PATH_SEL_ACTION; - ie_len = 12; + ie_len = 15; pos = skb_put(skb, 2 + ie_len); *pos++ = WLAN_EID_PERR; *pos++ = ie_len; - /* mode flags, reserved */ - *pos++ = 0; + /* ttl */ + *pos++ = MESH_TTL; /* number of destinations */ *pos++ = 1; + /* + * flags bit, bit 1 is unset if we know the sequence number and + * bit 2 is set if we have a reason code + */ + *pos = 0; + if (!dst_dsn) + *pos |= MP_F_USN; + if (dst_rcode) + *pos |= MP_F_RCODE; + pos++; memcpy(pos, dst, ETH_ALEN); pos += ETH_ALEN; memcpy(pos, &dst_dsn, 4); + pos += 4; + memcpy(pos, &dst_rcode, 2); ieee80211_tx_skb(sdata, skb, 1); return 0; @@ -598,13 +624,26 @@ fail: static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, u8 *perr_elem) { + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct mesh_path *mpath; + u8 ttl; u8 *ta, *dst_addr; + u8 dst_flags; u32 dst_dsn; + u16 dst_rcode; ta = mgmt->sa; + ttl = PERR_IE_TTL(perr_elem); + if (ttl <= 1) { + ifmsh->mshstats.dropped_frames_ttl++; + return; + } + ttl--; + dst_flags = PERR_IE_DST_FLAGS(perr_elem); dst_addr = PERR_IE_DST_ADDR(perr_elem); dst_dsn = PERR_IE_DST_DSN(perr_elem); + dst_rcode = PERR_IE_DST_RCODE(perr_elem); + rcu_read_lock(); mpath = mesh_path_lookup(dst_addr, sdata); if (mpath) { @@ -616,7 +655,8 @@ static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata, mpath->flags &= ~MESH_PATH_ACTIVE; mpath->dsn = dst_dsn; spin_unlock_bh(&mpath->state_lock); - mesh_path_error_tx(dst_addr, cpu_to_le32(dst_dsn), + mesh_path_error_tx(ttl, dst_addr, cpu_to_le32(dst_dsn), + cpu_to_le16(dst_rcode), sdata->dev->broadcast, sdata); } else spin_unlock_bh(&mpath->state_lock); @@ -711,7 +751,7 @@ void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata, last_hop_metric); } if (elems.perr) { - if (elems.perr_len != 12) + if (elems.perr_len != 15) /* Right now we support only one destination per PERR */ return; hwmp_perr_frame_process(sdata, mgmt, elems.perr); diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index 751c4d0..5d54123 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -465,8 +465,9 @@ void mesh_plink_broken(struct sta_info *sta) mpath->flags &= ~MESH_PATH_ACTIVE; ++mpath->dsn; spin_unlock_bh(&mpath->state_lock); - mesh_path_error_tx(mpath->dst, + mesh_path_error_tx(MESH_TTL, mpath->dst, cpu_to_le32(mpath->dsn), + PERR_RCODE_DEST_UNREACH, sdata->dev->broadcast, sdata); } else spin_unlock_bh(&mpath->state_lock); @@ -611,7 +612,8 @@ void mesh_path_discard_frame(struct sk_buff *skb, mpath = mesh_path_lookup(da, sdata); if (mpath) dsn = ++mpath->dsn; - mesh_path_error_tx(skb->data, cpu_to_le32(dsn), ra, sdata); + mesh_path_error_tx(MESH_TTL, skb->data, cpu_to_le32(dsn), + PERR_RCODE_NO_ROUTE, ra, sdata); } kfree_skb(skb); -- cgit v0.10.2 From a6a58b4f14106e61e5d78aac7995686ed0d5eab8 Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:51 +0000 Subject: mac80211: properly forward the RANN IE Increase hopcount and convert metric to LE before forwarding the RANN action frame. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index eb4180b..7d36f3a 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -686,6 +686,7 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata, orig_addr = rann->rann_addr; orig_dsn = rann->rann_seq; hopcount = rann->rann_hopcount; + hopcount++; metric = rann->rann_metric; mhwmp_dbg("received RANN from %pM\n", orig_addr); @@ -706,7 +707,8 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata, mesh_path_sel_frame_tx(MPATH_RANN, flags, orig_addr, cpu_to_le32(orig_dsn), 0, NULL, 0, sdata->dev->broadcast, - hopcount, ttl, 0, cpu_to_le32(metric), + hopcount, ttl, 0, + cpu_to_le32(metric + mpath->metric), 0, sdata); mpath->dsn = orig_dsn; } -- cgit v0.10.2 From 77fa76bb7f5589cd336e4da4a02e2d685b70ce0a Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:52 +0000 Subject: mac80211: set the AID field correctly for mesh peer frames This sets the AID field correctly for mesh peer confirm frames. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index cf12f61..ec68d20 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -181,7 +181,8 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, if (action == PLINK_CONFIRM) { pos = skb_put(skb, 4); /* two-byte status code followed by two-byte AID */ - memset(pos, 0, 4); + memset(pos, 0, 2); + memcpy(pos + 2, &plid, 2); } mesh_mgmt_ies_add(skb, sdata); } -- cgit v0.10.2 From 36f0d5f537885179c8fa92a70d4fcfb3a336b082 Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:53 +0000 Subject: mac80211: fix BSSID setup for beacon frames BSSID is now set to the TA. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 2f3345c..3ad053f 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2148,7 +2148,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); memset(mgmt->da, 0xff, ETH_ALEN); memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN); - /* BSSID is left zeroed, wildcard value */ + memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN); mgmt->u.beacon.beacon_int = cpu_to_le16(sdata->vif.bss_conf.beacon_int); mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */ -- cgit v0.10.2 From be125c60e46e165fbfe33db36a4a9d943d560a5b Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:54 +0000 Subject: mac80211: add the DS params to the beacon Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 63427d9..222a313 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -247,6 +247,13 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) } } + if (sband->band == IEEE80211_BAND_2GHZ) { + pos = skb_put(skb, 2 + 1); + *pos++ = WLAN_EID_DS_PARAMS; + *pos++ = 1; + *pos++ = ieee80211_frequency_to_channel(local->hw.conf.channel->center_freq); + } + pos = skb_put(skb, 2 + sdata->u.mesh.mesh_id_len); *pos++ = WLAN_EID_MESH_ID; *pos++ = sdata->u.mesh.mesh_id_len; -- cgit v0.10.2 From d19b3bf6384e66ac6e11a61ee31ed2cfe149f4d8 Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:55 +0000 Subject: mac80211: replace "destination" with "target" to follow the spec Resulting object files have the same MD5 as before. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 203adef..7a0bd6e 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -899,14 +899,14 @@ enum nl80211_sta_info { * * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running - * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN + * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded */ enum nl80211_mpath_flags { NL80211_MPATH_FLAG_ACTIVE = 1<<0, NL80211_MPATH_FLAG_RESOLVING = 1<<1, - NL80211_MPATH_FLAG_DSN_VALID = 1<<2, + NL80211_MPATH_FLAG_SN_VALID = 1<<2, NL80211_MPATH_FLAG_FIXED = 1<<3, NL80211_MPATH_FLAG_RESOLVED = 1<<4, }; @@ -919,7 +919,7 @@ enum nl80211_mpath_flags { * * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination - * @NL80211_ATTR_MPATH_DSN: destination sequence number + * @NL80211_ATTR_MPATH_SN: destination sequence number * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in @@ -930,7 +930,7 @@ enum nl80211_mpath_flags { enum nl80211_mpath_info { __NL80211_MPATH_INFO_INVALID, NL80211_MPATH_INFO_FRAME_QLEN, - NL80211_MPATH_INFO_DSN, + NL80211_MPATH_INFO_SN, NL80211_MPATH_INFO_METRIC, NL80211_MPATH_INFO_EXPTIME, NL80211_MPATH_INFO_FLAGS, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1ee41e4..7d0ae9c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -420,7 +420,7 @@ enum monitor_flags { * in during get_station() or dump_station(). * * MPATH_INFO_FRAME_QLEN: @frame_qlen filled - * MPATH_INFO_DSN: @dsn filled + * MPATH_INFO_SN: @sn filled * MPATH_INFO_METRIC: @metric filled * MPATH_INFO_EXPTIME: @exptime filled * MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled @@ -429,7 +429,7 @@ enum monitor_flags { */ enum mpath_info_flags { MPATH_INFO_FRAME_QLEN = BIT(0), - MPATH_INFO_DSN = BIT(1), + MPATH_INFO_SN = BIT(1), MPATH_INFO_METRIC = BIT(2), MPATH_INFO_EXPTIME = BIT(3), MPATH_INFO_DISCOVERY_TIMEOUT = BIT(4), @@ -444,7 +444,7 @@ enum mpath_info_flags { * * @filled: bitfield of flags from &enum mpath_info_flags * @frame_qlen: number of queued frames for this destination - * @dsn: destination sequence number + * @sn: target sequence number * @metric: metric (cost) of this mesh path * @exptime: expiration time for the mesh path from now, in msecs * @flags: mesh path flags @@ -458,7 +458,7 @@ enum mpath_info_flags { struct mpath_info { u32 filled; u32 frame_qlen; - u32 dsn; + u32 sn; u32 metric; u32 exptime; u32 discovery_timeout; diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 576b86f..8105358 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -935,7 +935,7 @@ static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop, pinfo->generation = mesh_paths_generation; pinfo->filled = MPATH_INFO_FRAME_QLEN | - MPATH_INFO_DSN | + MPATH_INFO_SN | MPATH_INFO_METRIC | MPATH_INFO_EXPTIME | MPATH_INFO_DISCOVERY_TIMEOUT | @@ -943,7 +943,7 @@ static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop, MPATH_INFO_FLAGS; pinfo->frame_qlen = mpath->frame_queue.qlen; - pinfo->dsn = mpath->dsn; + pinfo->sn = mpath->sn; pinfo->metric = mpath->metric; if (time_before(jiffies, mpath->exp_time)) pinfo->exptime = jiffies_to_msecs(mpath->exp_time - jiffies); @@ -955,8 +955,8 @@ static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop, pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE; if (mpath->flags & MESH_PATH_RESOLVING) pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING; - if (mpath->flags & MESH_PATH_DSN_VALID) - pinfo->flags |= NL80211_MPATH_FLAG_DSN_VALID; + if (mpath->flags & MESH_PATH_SN_VALID) + pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID; if (mpath->flags & MESH_PATH_FIXED) pinfo->flags |= NL80211_MPATH_FLAG_FIXED; if (mpath->flags & MESH_PATH_RESOLVING) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 2a7d3d4..fb54ddb 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -373,14 +373,14 @@ struct ieee80211_if_mesh { u8 mesh_sp_id; /* Authentication Protocol Identifier */ u8 mesh_auth_id; - /* Local mesh Destination Sequence Number */ - u32 dsn; + /* Local mesh Sequence Number */ + u32 sn; /* Last used PREQ ID */ u32 preq_id; atomic_t mpaths; - /* Timestamp of last DSN update */ - unsigned long last_dsn_update; - /* Timestamp of last DSN sent */ + /* Timestamp of last SN update */ + unsigned long last_sn_update; + /* Timestamp of last SN sent */ unsigned long last_preq; struct mesh_rmc *rmc; spinlock_t mesh_preq_queue_lock; diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 222a313..0f3e114 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -672,7 +672,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) MESH_MIN_DISCOVERY_TIMEOUT; ifmsh->accepting_plinks = true; ifmsh->preq_id = 0; - ifmsh->dsn = 0; + ifmsh->sn = 0; atomic_set(&ifmsh->mpaths, 0); mesh_rmc_init(sdata); ifmsh->last_preq = jiffies; diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 1d534c7..ee687ad 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -26,7 +26,7 @@ * * @MESH_PATH_ACTIVE: the mesh path can be used for forwarding * @MESH_PATH_RESOLVING: the discovery process is running for this mesh path - * @MESH_PATH_DSN_VALID: the mesh path contains a valid destination sequence + * @MESH_PATH_SN_VALID: the mesh path contains a valid destination sequence * number * @MESH_PATH_FIXED: the mesh path has been manually set and should not be * modified @@ -38,7 +38,7 @@ enum mesh_path_flags { MESH_PATH_ACTIVE = BIT(0), MESH_PATH_RESOLVING = BIT(1), - MESH_PATH_DSN_VALID = BIT(2), + MESH_PATH_SN_VALID = BIT(2), MESH_PATH_FIXED = BIT(3), MESH_PATH_RESOLVED = BIT(4), }; @@ -70,7 +70,7 @@ enum mesh_deferred_task_flags { * @timer: mesh path discovery timer * @frame_queue: pending queue for frames sent to this destination while the * path is unresolved - * @dsn: destination sequence number of the destination + * @sn: target sequence number * @metric: current metric to this destination * @hop_count: hops to destination * @exp_time: in jiffies, when the path will expire or when it expired @@ -94,7 +94,7 @@ struct mesh_path { struct timer_list timer; struct sk_buff_head frame_queue; struct rcu_head rcu; - u32 dsn; + u32 sn; u32 metric; u8 hop_count; unsigned long exp_time; @@ -280,7 +280,7 @@ void mesh_mpp_table_grow(void); u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl); /* Mesh paths */ -int mesh_path_error_tx(u8 ttl, u8 *dest, __le32 dest_dsn, __le16 dest_rcode, +int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, __le16 target_rcode, u8 *ra, struct ieee80211_sub_if_data *sdata); void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta); void mesh_path_flush_pending(struct mesh_path *mpath); diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 7d36f3a..f03a27d 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -56,33 +56,33 @@ static inline u32 u16_field_get(u8 *preq_elem, int offset, bool ae) #define PREQ_IE_TTL(x) (*(x + 2)) #define PREQ_IE_PREQ_ID(x) u32_field_get(x, 3, 0) #define PREQ_IE_ORIG_ADDR(x) (x + 7) -#define PREQ_IE_ORIG_DSN(x) u32_field_get(x, 13, 0); +#define PREQ_IE_ORIG_SN(x) u32_field_get(x, 13, 0); #define PREQ_IE_LIFETIME(x) u32_field_get(x, 17, AE_F_SET(x)); #define PREQ_IE_METRIC(x) u32_field_get(x, 21, AE_F_SET(x)); -#define PREQ_IE_DST_F(x) (*(AE_F_SET(x) ? x + 32 : x + 26)) -#define PREQ_IE_DST_ADDR(x) (AE_F_SET(x) ? x + 33 : x + 27) -#define PREQ_IE_DST_DSN(x) u32_field_get(x, 33, AE_F_SET(x)); +#define PREQ_IE_TARGET_F(x) (*(AE_F_SET(x) ? x + 32 : x + 26)) +#define PREQ_IE_TARGET_ADDR(x) (AE_F_SET(x) ? x + 33 : x + 27) +#define PREQ_IE_TARGET_SN(x) u32_field_get(x, 33, AE_F_SET(x)); #define PREP_IE_FLAGS(x) PREQ_IE_FLAGS(x) #define PREP_IE_HOPCOUNT(x) PREQ_IE_HOPCOUNT(x) #define PREP_IE_TTL(x) PREQ_IE_TTL(x) #define PREP_IE_ORIG_ADDR(x) (x + 3) -#define PREP_IE_ORIG_DSN(x) u32_field_get(x, 9, 0); +#define PREP_IE_ORIG_SN(x) u32_field_get(x, 9, 0); #define PREP_IE_LIFETIME(x) u32_field_get(x, 13, AE_F_SET(x)); #define PREP_IE_METRIC(x) u32_field_get(x, 17, AE_F_SET(x)); -#define PREP_IE_DST_ADDR(x) (AE_F_SET(x) ? x + 27 : x + 21) -#define PREP_IE_DST_DSN(x) u32_field_get(x, 27, AE_F_SET(x)); +#define PREP_IE_TARGET_ADDR(x) (AE_F_SET(x) ? x + 27 : x + 21) +#define PREP_IE_TARGET_SN(x) u32_field_get(x, 27, AE_F_SET(x)); #define PERR_IE_TTL(x) (*(x)) -#define PERR_IE_DST_FLAGS(x) (*(x + 2)) -#define PERR_IE_DST_ADDR(x) (x + 3) -#define PERR_IE_DST_DSN(x) u32_field_get(x, 9, 0); -#define PERR_IE_DST_RCODE(x) u16_field_get(x, 13, 0); +#define PERR_IE_TARGET_FLAGS(x) (*(x + 2)) +#define PERR_IE_TARGET_ADDR(x) (x + 3) +#define PERR_IE_TARGET_SN(x) u32_field_get(x, 9, 0); +#define PERR_IE_TARGET_RCODE(x) u16_field_get(x, 13, 0); #define MSEC_TO_TU(x) (x*1000/1024) -#define DSN_GT(x, y) ((long) (y) - (long) (x) < 0) -#define DSN_LT(x, y) ((long) (x) - (long) (y) < 0) +#define SN_GT(x, y) ((long) (y) - (long) (x) < 0) +#define SN_LT(x, y) ((long) (x) - (long) (y) < 0) #define net_traversal_jiffies(s) \ msecs_to_jiffies(s->u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime) @@ -102,9 +102,10 @@ enum mpath_frame_type { }; static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, - u8 *orig_addr, __le32 orig_dsn, u8 dst_flags, u8 *dst, - __le32 dst_dsn, u8 *da, u8 hop_count, u8 ttl, __le32 lifetime, - __le32 metric, __le32 preq_id, struct ieee80211_sub_if_data *sdata) + u8 *orig_addr, __le32 orig_sn, u8 target_flags, u8 *target, + __le32 target_sn, u8 *da, u8 hop_count, u8 ttl,__le32 lifetime, + __le32 metric, __le32 preq_id, + struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400); @@ -133,13 +134,13 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, switch (action) { case MPATH_PREQ: - mhwmp_dbg("sending PREQ to %pM\n", dst); + mhwmp_dbg("sending PREQ to %pM\n", target); ie_len = 37; pos = skb_put(skb, 2 + ie_len); *pos++ = WLAN_EID_PREQ; break; case MPATH_PREP: - mhwmp_dbg("sending PREP to %pM\n", dst); + mhwmp_dbg("sending PREP to %pM\n", target); ie_len = 31; pos = skb_put(skb, 2 + ie_len); *pos++ = WLAN_EID_PREP; @@ -165,7 +166,7 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, } memcpy(pos, orig_addr, ETH_ALEN); pos += ETH_ALEN; - memcpy(pos, &orig_dsn, 4); + memcpy(pos, &orig_sn, 4); pos += 4; if (action != MPATH_RANN) { memcpy(pos, &lifetime, 4); @@ -176,12 +177,12 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, if (action == MPATH_PREQ) { /* destination count */ *pos++ = 1; - *pos++ = dst_flags; + *pos++ = target_flags; } if (action != MPATH_RANN) { - memcpy(pos, dst, ETH_ALEN); + memcpy(pos, target, ETH_ALEN); pos += ETH_ALEN; - memcpy(pos, &dst_dsn, 4); + memcpy(pos, &target_sn, 4); } ieee80211_tx_skb(sdata, skb, 1); @@ -191,12 +192,14 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, /** * mesh_send_path error - Sends a PERR mesh management frame * - * @dst: broken destination - * @dst_dsn: dsn of the broken destination + * @target: broken destination + * @target_sn: SN of the broken destination + * @target_rcode: reason code for this PERR * @ra: node this frame is addressed to */ -int mesh_path_error_tx(u8 ttl, u8 *dst, __le32 dst_dsn, __le16 dst_rcode, - u8 *ra, struct ieee80211_sub_if_data *sdata) +int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, + __le16 target_rcode, u8 *ra, + struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400); @@ -234,16 +237,16 @@ int mesh_path_error_tx(u8 ttl, u8 *dst, __le32 dst_dsn, __le16 dst_rcode, * bit 2 is set if we have a reason code */ *pos = 0; - if (!dst_dsn) + if (!target_sn) *pos |= MP_F_USN; - if (dst_rcode) + if (target_rcode) *pos |= MP_F_RCODE; pos++; - memcpy(pos, dst, ETH_ALEN); + memcpy(pos, target, ETH_ALEN); pos += ETH_ALEN; - memcpy(pos, &dst_dsn, 4); + memcpy(pos, &target_sn, 4); pos += 4; - memcpy(pos, &dst_rcode, 2); + memcpy(pos, &target_rcode, 2); ieee80211_tx_skb(sdata, skb, 1); return 0; @@ -324,7 +327,7 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, struct sta_info *sta; bool fresh_info; u8 *orig_addr, *ta; - u32 orig_dsn, orig_metric; + u32 orig_sn, orig_metric; unsigned long orig_lifetime, exp_time; u32 last_hop_metric, new_metric; bool process = true; @@ -343,7 +346,7 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, switch (action) { case MPATH_PREQ: orig_addr = PREQ_IE_ORIG_ADDR(hwmp_ie); - orig_dsn = PREQ_IE_ORIG_DSN(hwmp_ie); + orig_sn = PREQ_IE_ORIG_SN(hwmp_ie); orig_lifetime = PREQ_IE_LIFETIME(hwmp_ie); orig_metric = PREQ_IE_METRIC(hwmp_ie); break; @@ -356,7 +359,7 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, * information from both PREQ and PREP frames. */ orig_addr = PREP_IE_ORIG_ADDR(hwmp_ie); - orig_dsn = PREP_IE_ORIG_DSN(hwmp_ie); + orig_sn = PREP_IE_ORIG_SN(hwmp_ie); orig_lifetime = PREP_IE_LIFETIME(hwmp_ie); orig_metric = PREP_IE_METRIC(hwmp_ie); break; @@ -382,9 +385,9 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, if (mpath->flags & MESH_PATH_FIXED) fresh_info = false; else if ((mpath->flags & MESH_PATH_ACTIVE) && - (mpath->flags & MESH_PATH_DSN_VALID)) { - if (DSN_GT(mpath->dsn, orig_dsn) || - (mpath->dsn == orig_dsn && + (mpath->flags & MESH_PATH_SN_VALID)) { + if (SN_GT(mpath->sn, orig_sn) || + (mpath->sn == orig_sn && action == MPATH_PREQ && new_metric > mpath->metric)) { process = false; @@ -403,9 +406,9 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, if (fresh_info) { mesh_path_assign_nexthop(mpath, sta); - mpath->flags |= MESH_PATH_DSN_VALID; + mpath->flags |= MESH_PATH_SN_VALID; mpath->metric = new_metric; - mpath->dsn = orig_dsn; + mpath->sn = orig_sn; mpath->exp_time = time_after(mpath->exp_time, exp_time) ? mpath->exp_time : exp_time; mesh_path_activate(mpath); @@ -444,7 +447,7 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, if (fresh_info) { mesh_path_assign_nexthop(mpath, sta); - mpath->flags &= ~MESH_PATH_DSN_VALID; + mpath->flags &= ~MESH_PATH_SN_VALID; mpath->metric = last_hop_metric; mpath->exp_time = time_after(mpath->exp_time, exp_time) ? mpath->exp_time : exp_time; @@ -466,47 +469,47 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct mesh_path *mpath; - u8 *dst_addr, *orig_addr; - u8 dst_flags, ttl; - u32 orig_dsn, dst_dsn, lifetime; + u8 *target_addr, *orig_addr; + u8 target_flags, ttl; + u32 orig_sn, target_sn, lifetime; bool reply = false; bool forward = true; - /* Update destination DSN, if present */ - dst_addr = PREQ_IE_DST_ADDR(preq_elem); + /* Update target SN, if present */ + target_addr = PREQ_IE_TARGET_ADDR(preq_elem); orig_addr = PREQ_IE_ORIG_ADDR(preq_elem); - dst_dsn = PREQ_IE_DST_DSN(preq_elem); - orig_dsn = PREQ_IE_ORIG_DSN(preq_elem); - dst_flags = PREQ_IE_DST_F(preq_elem); + target_sn = PREQ_IE_TARGET_SN(preq_elem); + orig_sn = PREQ_IE_ORIG_SN(preq_elem); + target_flags = PREQ_IE_TARGET_F(preq_elem); mhwmp_dbg("received PREQ from %pM\n", orig_addr); - if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) { + if (memcmp(target_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) { mhwmp_dbg("PREQ is for us\n"); forward = false; reply = true; metric = 0; - if (time_after(jiffies, ifmsh->last_dsn_update + + if (time_after(jiffies, ifmsh->last_sn_update + net_traversal_jiffies(sdata)) || - time_before(jiffies, ifmsh->last_dsn_update)) { - dst_dsn = ++ifmsh->dsn; - ifmsh->last_dsn_update = jiffies; + time_before(jiffies, ifmsh->last_sn_update)) { + target_sn = ++ifmsh->sn; + ifmsh->last_sn_update = jiffies; } } else { rcu_read_lock(); - mpath = mesh_path_lookup(dst_addr, sdata); + mpath = mesh_path_lookup(target_addr, sdata); if (mpath) { - if ((!(mpath->flags & MESH_PATH_DSN_VALID)) || - DSN_LT(mpath->dsn, dst_dsn)) { - mpath->dsn = dst_dsn; - mpath->flags |= MESH_PATH_DSN_VALID; - } else if ((!(dst_flags & MP_F_DO)) && + if ((!(mpath->flags & MESH_PATH_SN_VALID)) || + SN_LT(mpath->sn, target_sn)) { + mpath->sn = target_sn; + mpath->flags |= MESH_PATH_SN_VALID; + } else if ((!(target_flags & MP_F_DO)) && (mpath->flags & MESH_PATH_ACTIVE)) { reply = true; metric = mpath->metric; - dst_dsn = mpath->dsn; - if (dst_flags & MP_F_RF) - dst_flags |= MP_F_DO; + target_sn = mpath->sn; + if (target_flags & MP_F_RF) + target_flags |= MP_F_DO; else forward = false; } @@ -519,9 +522,9 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, ttl = ifmsh->mshcfg.dot11MeshTTL; if (ttl != 0) { mhwmp_dbg("replying to the PREQ\n"); - mesh_path_sel_frame_tx(MPATH_PREP, 0, dst_addr, - cpu_to_le32(dst_dsn), 0, orig_addr, - cpu_to_le32(orig_dsn), mgmt->sa, 0, ttl, + mesh_path_sel_frame_tx(MPATH_PREP, 0, target_addr, + cpu_to_le32(target_sn), 0, orig_addr, + cpu_to_le32(orig_sn), mgmt->sa, 0, ttl, cpu_to_le32(lifetime), cpu_to_le32(metric), 0, sdata); } else @@ -544,8 +547,8 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, preq_id = PREQ_IE_PREQ_ID(preq_elem); hopcount = PREQ_IE_HOPCOUNT(preq_elem) + 1; mesh_path_sel_frame_tx(MPATH_PREQ, flags, orig_addr, - cpu_to_le32(orig_dsn), dst_flags, dst_addr, - cpu_to_le32(dst_dsn), sdata->dev->broadcast, + cpu_to_le32(orig_sn), target_flags, target_addr, + cpu_to_le32(target_sn), sdata->dev->broadcast, hopcount, ttl, cpu_to_le32(lifetime), cpu_to_le32(metric), cpu_to_le32(preq_id), sdata); @@ -560,10 +563,10 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata, u8 *prep_elem, u32 metric) { struct mesh_path *mpath; - u8 *dst_addr, *orig_addr; + u8 *target_addr, *orig_addr; u8 ttl, hopcount, flags; u8 next_hop[ETH_ALEN]; - u32 dst_dsn, orig_dsn, lifetime; + u32 target_sn, orig_sn, lifetime; mhwmp_dbg("received PREP from %pM\n", PREP_IE_ORIG_ADDR(prep_elem)); @@ -573,8 +576,8 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata, * which corresponds with the originator of the PREQ which this PREP * replies */ - dst_addr = PREP_IE_DST_ADDR(prep_elem); - if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) + target_addr = PREP_IE_TARGET_ADDR(prep_elem); + if (memcmp(target_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) /* destination, no forwarding required */ return; @@ -585,7 +588,7 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata, } rcu_read_lock(); - mpath = mesh_path_lookup(dst_addr, sdata); + mpath = mesh_path_lookup(target_addr, sdata); if (mpath) spin_lock_bh(&mpath->state_lock); else @@ -601,13 +604,13 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata, lifetime = PREP_IE_LIFETIME(prep_elem); hopcount = PREP_IE_HOPCOUNT(prep_elem) + 1; orig_addr = PREP_IE_ORIG_ADDR(prep_elem); - dst_dsn = PREP_IE_DST_DSN(prep_elem); - orig_dsn = PREP_IE_ORIG_DSN(prep_elem); + target_sn = PREP_IE_TARGET_SN(prep_elem); + orig_sn = PREP_IE_ORIG_SN(prep_elem); mesh_path_sel_frame_tx(MPATH_PREP, flags, orig_addr, - cpu_to_le32(orig_dsn), 0, dst_addr, - cpu_to_le32(dst_dsn), mpath->next_hop->sta.addr, hopcount, ttl, - cpu_to_le32(lifetime), cpu_to_le32(metric), + cpu_to_le32(orig_sn), 0, target_addr, + cpu_to_le32(target_sn), mpath->next_hop->sta.addr, hopcount, + ttl, cpu_to_le32(lifetime), cpu_to_le32(metric), 0, sdata); rcu_read_unlock(); @@ -627,10 +630,10 @@ static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct mesh_path *mpath; u8 ttl; - u8 *ta, *dst_addr; - u8 dst_flags; - u32 dst_dsn; - u16 dst_rcode; + u8 *ta, *target_addr; + u8 target_flags; + u32 target_sn; + u16 target_rcode; ta = mgmt->sa; ttl = PERR_IE_TTL(perr_elem); @@ -639,24 +642,24 @@ static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata, return; } ttl--; - dst_flags = PERR_IE_DST_FLAGS(perr_elem); - dst_addr = PERR_IE_DST_ADDR(perr_elem); - dst_dsn = PERR_IE_DST_DSN(perr_elem); - dst_rcode = PERR_IE_DST_RCODE(perr_elem); + target_flags = PERR_IE_TARGET_FLAGS(perr_elem); + target_addr = PERR_IE_TARGET_ADDR(perr_elem); + target_sn = PERR_IE_TARGET_SN(perr_elem); + target_rcode = PERR_IE_TARGET_RCODE(perr_elem); rcu_read_lock(); - mpath = mesh_path_lookup(dst_addr, sdata); + mpath = mesh_path_lookup(target_addr, sdata); if (mpath) { spin_lock_bh(&mpath->state_lock); if (mpath->flags & MESH_PATH_ACTIVE && memcmp(ta, mpath->next_hop->sta.addr, ETH_ALEN) == 0 && - (!(mpath->flags & MESH_PATH_DSN_VALID) || - DSN_GT(dst_dsn, mpath->dsn))) { + (!(mpath->flags & MESH_PATH_SN_VALID) || + SN_GT(target_sn, mpath->sn))) { mpath->flags &= ~MESH_PATH_ACTIVE; - mpath->dsn = dst_dsn; + mpath->sn = target_sn; spin_unlock_bh(&mpath->state_lock); - mesh_path_error_tx(ttl, dst_addr, cpu_to_le32(dst_dsn), - cpu_to_le16(dst_rcode), + mesh_path_error_tx(ttl, target_addr, cpu_to_le32(target_sn), + cpu_to_le16(target_rcode), sdata->dev->broadcast, sdata); } else spin_unlock_bh(&mpath->state_lock); @@ -673,7 +676,7 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata, u8 *ta; u8 ttl, flags, hopcount; u8 *orig_addr; - u32 orig_dsn, metric; + u32 orig_sn, metric; ta = mgmt->sa; ttl = rann->rann_ttl; @@ -684,7 +687,7 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata, ttl--; flags = rann->rann_flags; orig_addr = rann->rann_addr; - orig_dsn = rann->rann_seq; + orig_sn = rann->rann_seq; hopcount = rann->rann_hopcount; hopcount++; metric = rann->rann_metric; @@ -703,14 +706,14 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata, mesh_queue_preq(mpath, PREQ_Q_F_START | PREQ_Q_F_REFRESH); } - if (mpath->dsn < orig_dsn) { + if (mpath->sn < orig_sn) { mesh_path_sel_frame_tx(MPATH_RANN, flags, orig_addr, - cpu_to_le32(orig_dsn), + cpu_to_le32(orig_sn), 0, NULL, 0, sdata->dev->broadcast, hopcount, ttl, 0, cpu_to_le32(metric + mpath->metric), 0, sdata); - mpath->dsn = orig_dsn; + mpath->sn = orig_sn; } rcu_read_unlock(); } @@ -823,7 +826,7 @@ void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata) struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct mesh_preq_queue *preq_node; struct mesh_path *mpath; - u8 ttl, dst_flags; + u8 ttl, target_flags; u32 lifetime; spin_lock_bh(&ifmsh->mesh_preq_queue_lock); @@ -865,11 +868,11 @@ void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata) ifmsh->last_preq = jiffies; - if (time_after(jiffies, ifmsh->last_dsn_update + + if (time_after(jiffies, ifmsh->last_sn_update + net_traversal_jiffies(sdata)) || - time_before(jiffies, ifmsh->last_dsn_update)) { - ++ifmsh->dsn; - sdata->u.mesh.last_dsn_update = jiffies; + time_before(jiffies, ifmsh->last_sn_update)) { + ++ifmsh->sn; + sdata->u.mesh.last_sn_update = jiffies; } lifetime = default_lifetime(sdata); ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; @@ -880,14 +883,14 @@ void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata) } if (preq_node->flags & PREQ_Q_F_REFRESH) - dst_flags = MP_F_DO; + target_flags = MP_F_DO; else - dst_flags = MP_F_RF; + target_flags = MP_F_RF; spin_unlock_bh(&mpath->state_lock); mesh_path_sel_frame_tx(MPATH_PREQ, 0, sdata->dev->dev_addr, - cpu_to_le32(ifmsh->dsn), dst_flags, mpath->dst, - cpu_to_le32(mpath->dsn), sdata->dev->broadcast, 0, + cpu_to_le32(ifmsh->sn), target_flags, mpath->dst, + cpu_to_le32(mpath->sn), sdata->dev->broadcast, 0, ttl, cpu_to_le32(lifetime), 0, cpu_to_le32(ifmsh->preq_id++), sdata); mod_timer(&mpath->timer, jiffies + mpath->discovery_timeout); @@ -914,15 +917,15 @@ int mesh_nexthop_lookup(struct sk_buff *skb, struct sk_buff *skb_to_free = NULL; struct mesh_path *mpath; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - u8 *dst_addr = hdr->addr3; + u8 *target_addr = hdr->addr3; int err = 0; rcu_read_lock(); - mpath = mesh_path_lookup(dst_addr, sdata); + mpath = mesh_path_lookup(target_addr, sdata); if (!mpath) { - mesh_path_add(dst_addr, sdata); - mpath = mesh_path_lookup(dst_addr, sdata); + mesh_path_add(target_addr, sdata); + mpath = mesh_path_lookup(target_addr, sdata); if (!mpath) { sdata->u.mesh.mshstats.dropped_frames_no_route++; err = -ENOSPC; diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index 5d54123..2cebdf5 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -463,10 +463,10 @@ void mesh_plink_broken(struct sta_info *sta) mpath->flags & MESH_PATH_ACTIVE && !(mpath->flags & MESH_PATH_FIXED)) { mpath->flags &= ~MESH_PATH_ACTIVE; - ++mpath->dsn; + ++mpath->sn; spin_unlock_bh(&mpath->state_lock); mesh_path_error_tx(MESH_TTL, mpath->dst, - cpu_to_le32(mpath->dsn), + cpu_to_le32(mpath->sn), PERR_RCODE_DEST_UNREACH, sdata->dev->broadcast, sdata); } else @@ -602,7 +602,7 @@ void mesh_path_discard_frame(struct sk_buff *skb, { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct mesh_path *mpath; - u32 dsn = 0; + u32 sn = 0; if (memcmp(hdr->addr4, sdata->dev->dev_addr, ETH_ALEN) != 0) { u8 *ra, *da; @@ -611,8 +611,8 @@ void mesh_path_discard_frame(struct sk_buff *skb, ra = hdr->addr1; mpath = mesh_path_lookup(da, sdata); if (mpath) - dsn = ++mpath->dsn; - mesh_path_error_tx(MESH_TTL, skb->data, cpu_to_le32(dsn), + sn = ++mpath->sn; + mesh_path_error_tx(MESH_TTL, skb->data, cpu_to_le32(sn), PERR_RCODE_NO_ROUTE, ra, sdata); } @@ -648,7 +648,7 @@ void mesh_path_fix_nexthop(struct mesh_path *mpath, struct sta_info *next_hop) { spin_lock_bh(&mpath->state_lock); mesh_path_assign_nexthop(mpath, next_hop); - mpath->dsn = 0xffff; + mpath->sn = 0xffff; mpath->metric = 0; mpath->hop_count = 0; mpath->exp_time = 0; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 8c8e4ea..7c19998 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -2116,9 +2116,9 @@ static int nl80211_send_mpath(struct sk_buff *msg, u32 pid, u32 seq, if (pinfo->filled & MPATH_INFO_FRAME_QLEN) NLA_PUT_U32(msg, NL80211_MPATH_INFO_FRAME_QLEN, pinfo->frame_qlen); - if (pinfo->filled & MPATH_INFO_DSN) - NLA_PUT_U32(msg, NL80211_MPATH_INFO_DSN, - pinfo->dsn); + if (pinfo->filled & MPATH_INFO_SN) + NLA_PUT_U32(msg, NL80211_MPATH_INFO_SN, + pinfo->sn); if (pinfo->filled & MPATH_INFO_METRIC) NLA_PUT_U32(msg, NL80211_MPATH_INFO_METRIC, pinfo->metric); -- cgit v0.10.2 From e304bfd30f356f7b75d30cad0029ecca705fd590 Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:56 +0000 Subject: mac80211: implement a timer to send RANN action frames RANN (Root Annoucement) frame TX. Send an action frame every second trying to build a path to all nodes on the mesh. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index fb54ddb..b63b99f 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -355,6 +355,7 @@ struct ieee80211_if_mesh { struct work_struct work; struct timer_list housekeeping_timer; struct timer_list mesh_path_timer; + struct timer_list mesh_path_root_timer; struct sk_buff_head skb_queue; unsigned long timers_running; diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 0f3e114..88dcfe3 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -14,6 +14,7 @@ #define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ) #define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ) +#define IEEE80211_MESH_RANN_INTERVAL (1 * HZ) #define MESHCONF_PP_OFFSET 0 /* Path Selection Protocol */ #define MESHCONF_PM_OFFSET 1 /* Path Selection Metric */ @@ -26,6 +27,7 @@ #define TMR_RUNNING_HK 0 #define TMR_RUNNING_MP 1 +#define TMR_RUNNING_MPR 2 int mesh_allocated; static struct kmem_cache *rm_cache; @@ -354,6 +356,23 @@ static void ieee80211_mesh_path_timer(unsigned long data) ieee80211_queue_work(&local->hw, &ifmsh->work); } +static void ieee80211_mesh_path_root_timer(unsigned long data) +{ + struct ieee80211_sub_if_data *sdata = + (struct ieee80211_sub_if_data *) data; + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + struct ieee80211_local *local = sdata->local; + + set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); + + if (local->quiescing) { + set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running); + return; + } + + ieee80211_queue_work(&local->hw, &ifmsh->work); +} + /** * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame * @hdr: 802.11 frame header @@ -447,6 +466,15 @@ static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata, round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); } +static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + + mesh_path_tx_root_frame(sdata); + mod_timer(&ifmsh->mesh_path_root_timer, + round_jiffies(jiffies + IEEE80211_MESH_RANN_INTERVAL)); +} + #ifdef CONFIG_PM void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata) { @@ -461,6 +489,8 @@ void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata) set_bit(TMR_RUNNING_HK, &ifmsh->timers_running); if (del_timer_sync(&ifmsh->mesh_path_timer)) set_bit(TMR_RUNNING_MP, &ifmsh->timers_running); + if (del_timer_sync(&ifmsh->mesh_path_root_timer)) + set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running); } void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata) @@ -471,6 +501,8 @@ void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata) add_timer(&ifmsh->housekeeping_timer); if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running)) add_timer(&ifmsh->mesh_path_timer); + if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running)) + add_timer(&ifmsh->mesh_path_root_timer); } #endif @@ -490,6 +522,7 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) { del_timer_sync(&sdata->u.mesh.housekeeping_timer); + del_timer_sync(&sdata->u.mesh.mesh_path_root_timer); /* * If the timer fired while we waited for it, it will have * requeued the work. Now the work will be running again @@ -627,6 +660,9 @@ static void ieee80211_mesh_work(struct work_struct *work) if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags)) ieee80211_mesh_housekeeping(sdata, ifmsh); + + if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags)) + ieee80211_mesh_rootpath(sdata); } void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) @@ -683,6 +719,9 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) setup_timer(&ifmsh->mesh_path_timer, ieee80211_mesh_path_timer, (unsigned long) sdata); + setup_timer(&ifmsh->mesh_path_root_timer, + ieee80211_mesh_path_root_timer, + (unsigned long) sdata); INIT_LIST_HEAD(&ifmsh->preq_queue.list); spin_lock_init(&ifmsh->mesh_preq_queue_lock); } diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index ee687ad..00ee842 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -53,11 +53,13 @@ enum mesh_path_flags { * to grow. * @MESH_WORK_GROW_MPP_TABLE: the mesh portals table is full and needs to * grow + * @MESH_WORK_ROOT: the mesh root station needs to send a frame */ enum mesh_deferred_task_flags { MESH_WORK_HOUSEKEEPING, MESH_WORK_GROW_MPATH_TABLE, MESH_WORK_GROW_MPP_TABLE, + MESH_WORK_ROOT, }; /** @@ -294,6 +296,7 @@ void mesh_path_discard_frame(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata); void mesh_path_quiesce(struct ieee80211_sub_if_data *sdata); void mesh_path_restart(struct ieee80211_sub_if_data *sdata); +void mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata); extern int mesh_paths_generation; diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index f03a27d..7483894 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -1003,3 +1003,14 @@ void mesh_path_timer(unsigned long data) endmpathtimer: rcu_read_unlock(); } + +void +mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + + mesh_path_sel_frame_tx(MPATH_RANN, 0, sdata->dev->dev_addr, + cpu_to_le32(++ifmsh->sn), + 0, NULL, 0, sdata->dev->broadcast, + 0, MESH_TTL, 0, 0, 0, sdata); +} -- cgit v0.10.2 From 63c5723bc3af8d4e86984dd4ff0c78218de418d0 Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:57 +0000 Subject: mac80211: add nl80211/cfg80211 handling of the new mesh root mode option. Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 7a0bd6e..d2f276d 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1200,6 +1200,8 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) * that it takes for an HWMP information element to propagate across the mesh * + * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not + * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use @@ -1219,6 +1221,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + NL80211_MESHCONF_HWMP_ROOTMODE, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7d0ae9c..0e4c51f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -508,6 +508,7 @@ struct mesh_config { u32 dot11MeshHWMPactivePathTimeout; u16 dot11MeshHWMPpreqMinInterval; u16 dot11MeshHWMPnetDiameterTraversalTime; + u8 dot11MeshHWMPRootMode; }; /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 8105358..7f18c8f 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1029,7 +1029,10 @@ static int ieee80211_set_mesh_params(struct wiphy *wiphy, { struct mesh_config *conf; struct ieee80211_sub_if_data *sdata; + struct ieee80211_if_mesh *ifmsh; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + ifmsh = &sdata->u.mesh; /* Set the config options which we are interested in setting */ conf = &(sdata->u.mesh.mshcfg); @@ -1064,6 +1067,10 @@ static int ieee80211_set_mesh_params(struct wiphy *wiphy, mask)) conf->dot11MeshHWMPnetDiameterTraversalTime = nconf->dot11MeshHWMPnetDiameterTraversalTime; + if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOTMODE, mask)) { + conf->dot11MeshHWMPRootMode = nconf->dot11MeshHWMPRootMode; + ieee80211_mesh_root_setup(ifmsh); + } return 0; } diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index 8782264..472b203 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -149,6 +149,8 @@ IEEE80211_IF_FILE(path_refresh_time, u.mesh.mshcfg.path_refresh_time, DEC); IEEE80211_IF_FILE(min_discovery_timeout, u.mesh.mshcfg.min_discovery_timeout, DEC); +IEEE80211_IF_FILE(dot11MeshHWMPRootMode, + u.mesh.mshcfg.dot11MeshHWMPRootMode, DEC); #endif diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 88dcfe3..05955dc 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -373,6 +373,17 @@ static void ieee80211_mesh_path_root_timer(unsigned long data) ieee80211_queue_work(&local->hw, &ifmsh->work); } +void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh) +{ + if (ifmsh->mshcfg.dot11MeshHWMPRootMode) + set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); + else { + clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); + /* stop running timer */ + del_timer_sync(&ifmsh->mesh_path_root_timer); + } +} + /** * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame * @hdr: 802.11 frame header @@ -503,6 +514,7 @@ void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata) add_timer(&ifmsh->mesh_path_timer); if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running)) add_timer(&ifmsh->mesh_path_root_timer); + ieee80211_mesh_root_setup(ifmsh); } #endif @@ -512,6 +524,7 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) struct ieee80211_local *local = sdata->local; set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); + ieee80211_mesh_root_setup(ifmsh); ieee80211_queue_work(&local->hw, &ifmsh->work); sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL; ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON | diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 00ee842..5ad6975 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -242,6 +242,7 @@ ieee80211_rx_result ieee80211_mesh_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb); void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata); void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata); +void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh); /* Mesh paths */ int mesh_nexthop_lookup(struct sk_buff *skb, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 7c19998..17bcad6 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -2616,6 +2616,8 @@ static int nl80211_get_mesh_params(struct sk_buff *skb, cur_params.dot11MeshHWMPpreqMinInterval); NLA_PUT_U16(msg, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, cur_params.dot11MeshHWMPnetDiameterTraversalTime); + NLA_PUT_U8(msg, NL80211_MESHCONF_HWMP_ROOTMODE, + cur_params.dot11MeshHWMPRootMode); nla_nest_end(msg, pinfoattr); genlmsg_end(msg, hdr); err = genlmsg_reply(msg, info); @@ -2726,6 +2728,10 @@ static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info) dot11MeshHWMPnetDiameterTraversalTime, mask, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, nla_get_u16); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, + dot11MeshHWMPRootMode, mask, + NL80211_MESHCONF_HWMP_ROOTMODE, + nla_get_u8); /* Apply changes */ err = rdev->ops->set_mesh_params(&rdev->wiphy, dev, &cfg, mask); -- cgit v0.10.2 From 264d9b7d8a629620c8de84c614910c3164e935f8 Mon Sep 17 00:00:00 2001 From: Rui Paulo Date: Mon, 9 Nov 2009 23:46:58 +0000 Subject: mac80211: update copyrights to 2009 Signed-off-by: Rui Paulo Signed-off-by: Javier Cardona Reviewed-by: Andrey Yurovsky Tested-by: Brian Cavagnolo Signed-off-by: John W. Linville diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 05955dc..bbd56b0 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 open80211s Ltd. + * Copyright (c) 2008, 2009 open80211s Ltd. * Authors: Luis Carlos Cobo * Javier Cardona * diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 5ad6975..bd0e1cb 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 open80211s Ltd. + * Copyright (c) 2008, 2009 open80211s Ltd. * Authors: Luis Carlos Cobo * Javier Cardona * diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 7483894..5c67e7b 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 open80211s Ltd. + * Copyright (c) 2008, 2009 open80211s Ltd. * Author: Luis Carlos Cobo * * This program is free software; you can redistribute it and/or modify diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index 2cebdf5..5399e7a 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 open80211s Ltd. + * Copyright (c) 2008, 2009 open80211s Ltd. * Author: Luis Carlos Cobo * * This program is free software; you can redistribute it and/or modify diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index ec68d20..f21329a 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 open80211s Ltd. + * Copyright (c) 2008, 2009 open80211s Ltd. * Author: Luis Carlos Cobo * * This program is free software; you can redistribute it and/or modify -- cgit v0.10.2 From f273fe55e3f3f0b66b7624c0102d3ef44bbdfe6a Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Tue, 10 Nov 2009 22:41:51 +0100 Subject: rt2x00: Properly detect Ralink RT3070 devices. Allow rt2800usb to properly detect RT307X based devices, and set the appropriate chipset values. Signed-off-by: Gertjan van Wingede Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index eb6d129..c41bb4a 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1828,24 +1828,26 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2800_register_read(rt2x00dev, MAC_CSR0, ®); + rt2x00_set_chip_rf(rt2x00dev, value, reg); + if (rt2x00_intf_is_usb(rt2x00dev)) { struct rt2x00_chip *chip = &rt2x00dev->chip; - rt2x00_set_chip(rt2x00dev, RT2870, value, reg); - /* * The check for rt2860 is not a typo, some rt2870 hardware * identifies itself as rt2860 in the CSR register. */ - if (!rt2x00_check_rev(chip, 0xfff00000, 0x28600000) && - !rt2x00_check_rev(chip, 0xfff00000, 0x28700000) && - !rt2x00_check_rev(chip, 0xfff00000, 0x28800000) && - !rt2x00_check_rev(chip, 0xffff0000, 0x30700000)) { + if (rt2x00_check_rev(chip, 0xfff00000, 0x28600000) || + rt2x00_check_rev(chip, 0xfff00000, 0x28700000) || + rt2x00_check_rev(chip, 0xfff00000, 0x28800000)) { + rt2x00_set_chip_rt(rt2x00dev, RT2870); + } else if (rt2x00_check_rev(chip, 0xffff0000, 0x30700000)) { + rt2x00_set_chip_rt(rt2x00dev, RT3070); + } else { ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); return -ENODEV; } - } else if (rt2x00_intf_is_pci(rt2x00dev)) - rt2x00_set_chip_rf(rt2x00dev, value, reg); + } if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && !rt2x00_rf(&rt2x00dev->chip, RF2850) && @@ -1853,10 +1855,8 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) !rt2x00_rf(&rt2x00dev->chip, RF2750) && !rt2x00_rf(&rt2x00dev->chip, RF3020) && !rt2x00_rf(&rt2x00dev->chip, RF2020) && - (rt2x00_intf_is_usb(rt2x00dev) || - (rt2x00_intf_is_pci(rt2x00dev) && - !rt2x00_rf(&rt2x00dev->chip, RF3021) && - !rt2x00_rf(&rt2x00dev->chip, RF3022)))) { + !rt2x00_rf(&rt2x00dev->chip, RF3021) && + !rt2x00_rf(&rt2x00dev->chip, RF3022)) { ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); return -ENODEV; } @@ -2057,7 +2057,9 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->channels = rf_vals; } else if (rt2x00_intf_is_usb(rt2x00dev) && (rt2x00_rf(chip, RF3020) || - rt2x00_rf(chip, RF2020))) { + rt2x00_rf(chip, RF2020) || + rt2x00_rf(chip, RF3021) || + rt2x00_rf(chip, RF3022))) { spec->num_channels = ARRAY_SIZE(rf_vals_3070); spec->channels = rf_vals_3070; } diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 5a1b161..62da572 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -172,6 +172,7 @@ struct rt2x00_chip { #define RT3052 0x3052 /* WSOC */ #define RT3090 0x3090 /* 2.4GHz PCIe */ #define RT2870 0x1600 +#define RT3070 0x1800 u16 rf; u32 rev; -- cgit v0.10.2 From a043897a314e8bcfc821d54fe4e591efed5936a3 Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Wed, 11 Nov 2009 11:30:02 +0100 Subject: cfg80211: introduce nl80211_get_ifidx() ... which get's rid of three indentical cut-n-paste sections. Signed-off-by: Holger Schurig Signed-off-by: John W. Linville diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 17bcad6..4dc139c 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -152,6 +152,26 @@ nl80211_key_policy[NL80211_KEY_MAX + 1] __read_mostly = { [NL80211_KEY_DEFAULT_MGMT] = { .type = NLA_FLAG }, }; +/* ifidx get helper */ +static int nl80211_get_ifidx(struct netlink_callback *cb) +{ + int res; + + res = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, + nl80211_fam.attrbuf, nl80211_fam.maxattr, + nl80211_policy); + if (res) + return res; + + if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]) + return -EINVAL; + + res = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]); + if (!res) + return -EINVAL; + return res; +} + /* IE validation */ static bool is_valid_ie_attr(const struct nlattr *attr) { @@ -1693,20 +1713,10 @@ static int nl80211_dump_station(struct sk_buff *skb, int sta_idx = cb->args[1]; int err; - if (!ifidx) { - err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, - nl80211_fam.attrbuf, nl80211_fam.maxattr, - nl80211_policy); - if (err) - return err; - - if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]) - return -EINVAL; - - ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]); - if (!ifidx) - return -EINVAL; - } + if (!ifidx) + ifidx = nl80211_get_ifidx(cb); + if (ifidx < 0) + return ifidx; rtnl_lock(); @@ -2156,20 +2166,10 @@ static int nl80211_dump_mpath(struct sk_buff *skb, int path_idx = cb->args[1]; int err; - if (!ifidx) { - err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, - nl80211_fam.attrbuf, nl80211_fam.maxattr, - nl80211_policy); - if (err) - return err; - - if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]) - return -EINVAL; - - ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]); - if (!ifidx) - return -EINVAL; - } + if (!ifidx) + ifidx = nl80211_get_ifidx(cb); + if (ifidx < 0) + return ifidx; rtnl_lock(); @@ -3198,21 +3198,11 @@ static int nl80211_dump_scan(struct sk_buff *skb, int start = cb->args[1], idx = 0; int err; - if (!ifidx) { - err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, - nl80211_fam.attrbuf, nl80211_fam.maxattr, - nl80211_policy); - if (err) - return err; - - if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]) - return -EINVAL; - - ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]); - if (!ifidx) - return -EINVAL; - cb->args[0] = ifidx; - } + if (!ifidx) + ifidx = nl80211_get_ifidx(cb); + if (ifidx < 0) + return ifidx; + cb->args[0] = ifidx; dev = dev_get_by_index(sock_net(skb->sk), ifidx); if (!dev) -- cgit v0.10.2 From 61fa713c751683da915fa0c1aa502be85822c357 Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Wed, 11 Nov 2009 12:25:40 +0100 Subject: cfg80211: return channel noise via survey API This patch implements the NL80211_CMD_GET_SURVEY command and an get_survey() ops that a driver can implement. The goal of this command is to allow a drivers to report channel survey data (e.g. channel noise, channel occupation). For now, only the mechanism to report back channel noise has been implemented. In future, there will either be a survey-trigger command --- or the existing scan-trigger command will be enhanced. This will allow user-space to request survey for arbitrary channels. Note: any driver that cannot report channel noise should not report any value at all, e.g. made-up -92 dBm. Signed-off-by: Holger Schurig Signed-off-by: John W. Linville diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index d2f276d..45db17f 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -160,6 +160,11 @@ * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, * partial scan results may be available * + * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation + * or noise level + * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to + * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) + * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain * has been changed and provides details of the request information * that caused the change such as who initiated the regulatory request @@ -341,6 +346,9 @@ enum nl80211_commands { NL80211_CMD_SET_WIPHY_NETNS, + NL80211_CMD_GET_SURVEY, + NL80211_CMD_NEW_SURVEY_RESULTS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -586,6 +594,10 @@ enum nl80211_commands { * * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface * + * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of + * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute + * containing info as possible, see &enum survey_info. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -718,6 +730,8 @@ enum nl80211_attrs { NL80211_ATTR_4ADDR, + NL80211_ATTR_SURVEY_INFO, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1121,6 +1135,26 @@ enum nl80211_reg_rule_flags { }; /** + * enum nl80211_survey_info - survey information + * + * These attribute types are used with %NL80211_ATTR_SURVEY_INFO + * when getting information about a survey. + * + * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved + * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel + * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) + */ +enum nl80211_survey_info { + __NL80211_SURVEY_INFO_INVALID, + NL80211_SURVEY_INFO_FREQUENCY, + NL80211_SURVEY_INFO_NOISE, + + /* keep last */ + __NL80211_SURVEY_INFO_AFTER_LAST, + NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 +}; + +/** * enum nl80211_mntr_flags - monitor configuration flags * * Monitor configuration flags. diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 0e4c51f..21710fc 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -235,6 +235,35 @@ struct key_params { }; /** + * enum survey_info_flags - survey information flags + * + * Used by the driver to indicate which info in &struct survey_info + * it has filled in during the get_survey(). + */ +enum survey_info_flags { + SURVEY_INFO_NOISE_DBM = 1<<0, +}; + +/** + * struct survey_info - channel survey response + * + * Used by dump_survey() to report back per-channel survey information. + * + * @channel: the channel this survey record reports, mandatory + * @filled: bitflag of flags from &enum survey_info_flags + * @noise: channel noise in dBm. This and all following fields are + * optional + * + * This structure can later be expanded with things like + * channel duty cycle etc. + */ +struct survey_info { + struct ieee80211_channel *channel; + u32 filled; + s8 noise; +}; + +/** * struct beacon_parameters - beacon parameters * * Used to configure the beacon for an interface. @@ -944,6 +973,8 @@ struct cfg80211_bitrate_mask { * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting * functions to adjust rfkill hw state * + * @dump_survey: get site survey information. + * * @testmode_cmd: run a test mode command */ struct cfg80211_ops { @@ -1063,6 +1094,9 @@ struct cfg80211_ops { const u8 *peer, const struct cfg80211_bitrate_mask *mask); + int (*dump_survey)(struct wiphy *wiphy, struct net_device *netdev, + int idx, struct survey_info *info); + /* some temporary stuff to finish wext */ int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev, bool enabled, int timeout); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 4dc139c..5c8b3bfa 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3245,6 +3245,106 @@ static int nl80211_dump_scan(struct sk_buff *skb, return err; } +static int nl80211_send_survey(struct sk_buff *msg, u32 pid, u32 seq, + int flags, struct net_device *dev, + struct survey_info *survey) +{ + void *hdr; + struct nlattr *infoattr; + + /* Survey without a channel doesn't make sense */ + if (!survey->channel) + return -EINVAL; + + hdr = nl80211hdr_put(msg, pid, seq, flags, + NL80211_CMD_NEW_SURVEY_RESULTS); + if (!hdr) + return -ENOMEM; + + NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex); + + infoattr = nla_nest_start(msg, NL80211_ATTR_SURVEY_INFO); + if (!infoattr) + goto nla_put_failure; + + NLA_PUT_U32(msg, NL80211_SURVEY_INFO_FREQUENCY, + survey->channel->center_freq); + if (survey->filled & SURVEY_INFO_NOISE_DBM) + NLA_PUT_U8(msg, NL80211_SURVEY_INFO_NOISE, + survey->noise); + + nla_nest_end(msg, infoattr); + + return genlmsg_end(msg, hdr); + + nla_put_failure: + genlmsg_cancel(msg, hdr); + return -EMSGSIZE; +} + +static int nl80211_dump_survey(struct sk_buff *skb, + struct netlink_callback *cb) +{ + struct survey_info survey; + struct cfg80211_registered_device *dev; + struct net_device *netdev; + int ifidx = cb->args[0]; + int survey_idx = cb->args[1]; + int res; + + if (!ifidx) + ifidx = nl80211_get_ifidx(cb); + if (ifidx < 0) + return ifidx; + cb->args[0] = ifidx; + + rtnl_lock(); + + netdev = __dev_get_by_index(sock_net(skb->sk), ifidx); + if (!netdev) { + res = -ENODEV; + goto out_rtnl; + } + + dev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx); + if (IS_ERR(dev)) { + res = PTR_ERR(dev); + goto out_rtnl; + } + + if (!dev->ops->dump_survey) { + res = -EOPNOTSUPP; + goto out_err; + } + + while (1) { + res = dev->ops->dump_survey(&dev->wiphy, netdev, survey_idx, + &survey); + if (res == -ENOENT) + break; + if (res) + goto out_err; + + if (nl80211_send_survey(skb, + NETLINK_CB(cb->skb).pid, + cb->nlh->nlmsg_seq, NLM_F_MULTI, + netdev, + &survey) < 0) + goto out; + survey_idx++; + } + + out: + cb->args[1] = survey_idx; + res = skb->len; + out_err: + cfg80211_unlock_rdev(dev); + out_rtnl: + rtnl_unlock(); + + return res; +} + static bool nl80211_valid_auth_type(enum nl80211_auth_type auth_type) { return auth_type <= NL80211_AUTHTYPE_MAX; @@ -4322,6 +4422,11 @@ static struct genl_ops nl80211_ops[] = { .policy = nl80211_policy, .flags = GENL_ADMIN_PERM, }, + { + .cmd = NL80211_CMD_GET_SURVEY, + .policy = nl80211_policy, + .dumpit = nl80211_dump_survey, + }, }; static struct genl_multicast_group nl80211_mlme_mcgrp = { .name = "mlme", -- cgit v0.10.2 From f501dba4c4c5bda1b64c941997ab7ece1d503945 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 11 Nov 2009 13:17:36 +0100 Subject: mac80211: fix broadcast frame handling for 4-addr AP VLANs Without this patch, broadcast frames from the station behind a 4-addr AP VLAN would be reflected back to the source. Fix this by checking the 4-addr flag before bridging multicast frames in the cell. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 006cf89..6bce97e 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1236,7 +1236,7 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx) if ((sdata->vif.type == NL80211_IFTYPE_AP || sdata->vif.type == NL80211_IFTYPE_AP_VLAN) && !(sdata->flags & IEEE80211_SDATA_DONT_BRIDGE_PACKETS) && - (rx->flags & IEEE80211_RX_RA_MATCH)) { + (rx->flags & IEEE80211_RX_RA_MATCH) && !rx->sdata->use_4addr) { if (is_multicast_ether_addr(ehdr->h_dest)) { /* * send multicast frames both to higher layers in -- cgit v0.10.2 From c258d2de972d1e391a3dec731e0801ed1cc85494 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 11 Nov 2009 17:23:31 +0100 Subject: nl80211: only allow adding stations to running vlan interfaces Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 5c8b3bfa..37264d5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1821,7 +1821,7 @@ static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info) } /* - * Get vlan interface making sure it is on the right wiphy. + * Get vlan interface making sure it is running and on the right wiphy. */ static int get_vlan(struct genl_info *info, struct cfg80211_registered_device *rdev, @@ -1839,6 +1839,8 @@ static int get_vlan(struct genl_info *info, return -EINVAL; if ((*vlan)->ieee80211_ptr->wiphy != &rdev->wiphy) return -EINVAL; + if (!netif_running(*vlan)) + return -ENETDOWN; } return 0; } -- cgit v0.10.2 From c90017dd43f0cdb42134b9229761e8be02bcd524 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Fri, 13 Nov 2009 14:32:39 +0530 Subject: ath9k_hw: Fix possible OOB array indexing in gen_timer_index[] on 64-bit Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 6d3e314..abaa2f0 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -432,7 +432,7 @@ struct ath9k_hw_version { * Using de Bruijin sequence to to look up 1's index in a 32 bit number * debruijn32 = 0000 0111 0111 1100 1011 0101 0011 0001 */ -#define debruijn32 0x077CB531UL +#define debruijn32 0x077CB531U struct ath_gen_timer_configuration { u32 next_addr; -- cgit v0.10.2 From c37919bfe0a5c1bee9a31701a31e05a2f8840936 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Fri, 13 Nov 2009 14:32:40 +0530 Subject: ath9k_hw: Fix AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB and its shift value in 0x4054 The bit value of AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB is wrong, it should be 0x400 and the number of bits to be right shifted is 10. Having this wrong value in 0x4054 sometimes affects bt quality on btcoex environment. Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 061e12c..49ec25f 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -971,10 +971,10 @@ enum { #define AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_S 4 #define AR_GPIO_INPUT_EN_VAL_RFSILENT_DEF 0x00000080 #define AR_GPIO_INPUT_EN_VAL_RFSILENT_DEF_S 7 +#define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB 0x00000400 +#define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB_S 10 #define AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB 0x00001000 #define AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB_S 12 -#define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB 0x00001000 -#define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB_S 1 #define AR_GPIO_INPUT_EN_VAL_RFSILENT_BB 0x00008000 #define AR_GPIO_INPUT_EN_VAL_RFSILENT_BB_S 15 #define AR_GPIO_RTC_RESET_OVERRIDE_ENABLE 0x00010000 -- cgit v0.10.2 From 235faf9b41b7b090be15b483bf900c0b9a8da4ea Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Thu, 12 Nov 2009 20:04:52 +0100 Subject: rt2800lib: fix some typos and punctuation in comments fix some typos and punctuation in comments Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Jiri Kosina [bart: ported the change from the older patch for rt2800usb & rt61pci] Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index c41bb4a..9656699 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1089,7 +1089,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) if (rt2x00_intf_is_usb(rt2x00dev)) { /* - * Wait untill BBP and RF are ready. + * Wait until BBP and RF are ready. */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2800_register_read(rt2x00dev, MAC_CSR0, ®); -- cgit v0.10.2 From fa6f632fba300f92d21962ef6e58411345465241 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 9 Nov 2009 22:59:58 +0100 Subject: rt2x00: Fix rt2800lib RF chip programming selection. Mirror the legacy Ralink driver with respect to rt2800 RF register programming. Execute rt2800_config_channel_rt3x for all RF2020, RF3020, RF3021 & RF3022 chipsets when operating on RT3070 devices. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 9656699..53baa09 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -806,10 +806,14 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, unsigned int tx_pin; u8 bbp; - if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) - rt2800_config_channel_rt2x(rt2x00dev, conf, rf, info); - else + if (rt2x00_rt(&rt2x00dev->chip, RT3070) && + (rt2x00_rf(&rt2x00dev->chip, RF2020) || + rt2x00_rf(&rt2x00dev->chip, RF3020) || + rt2x00_rf(&rt2x00dev->chip, RF3021) || + rt2x00_rf(&rt2x00dev->chip, RF3022))) rt2800_config_channel_rt3x(rt2x00dev, conf, rf, info); + else + rt2800_config_channel_rt2x(rt2x00dev, conf, rf, info); /* * Change BBP settings -- cgit v0.10.2 From cce5fc45f9e9570f320009431d033d5a8f6144cc Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Tue, 10 Nov 2009 22:42:40 +0100 Subject: rt2x00: Initialize rf302x RF values properly for rt2800pci. Ensure RF302x and RF2020 chipsets are handled properly in rt2800lib for the rt3090 chipset. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 53baa09..d88857c 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1,5 +1,6 @@ /* Copyright (C) 2009 Bartlomiej Zolnierkiewicz + Copyright (C) 2009 Gertjan van Wingerde Based on the original rt2800pci.c and rt2800usb.c. Copyright (C) 2009 Ivo van Doorn @@ -806,7 +807,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, unsigned int tx_pin; u8 bbp; - if (rt2x00_rt(&rt2x00dev->chip, RT3070) && + if ((rt2x00_rt(&rt2x00dev->chip, RT3070) || + rt2x00_rt(&rt2x00dev->chip, RT3090)) && (rt2x00_rf(&rt2x00dev->chip, RF2020) || rt2x00_rf(&rt2x00dev->chip, RF3020) || rt2x00_rf(&rt2x00dev->chip, RF3021) || @@ -1989,7 +1991,7 @@ static const struct rf_channel rf_vals[] = { * RF value list for rt3070 * Supports: 2.4 GHz */ -static const struct rf_channel rf_vals_3070[] = { +static const struct rf_channel rf_vals_302x[] = { {1, 241, 2, 2 }, {2, 241, 2, 7 }, {3, 242, 2, 2 }, @@ -2046,26 +2048,19 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) if (rt2x00_rf(chip, RF2820) || rt2x00_rf(chip, RF2720) || - (rt2x00_intf_is_pci(rt2x00dev) && - (rt2x00_rf(chip, RF3020) || - rt2x00_rf(chip, RF3021) || - rt2x00_rf(chip, RF3022) || - rt2x00_rf(chip, RF2020) || - rt2x00_rf(chip, RF3052)))) { + (rt2x00_intf_is_pci(rt2x00dev) && rt2x00_rf(chip, RF3052))) { spec->num_channels = 14; spec->channels = rf_vals; - } else if (rt2x00_rf(chip, RF2850) || - rt2x00_rf(chip, RF2750)) { + } else if (rt2x00_rf(chip, RF2850) || rt2x00_rf(chip, RF2750)) { spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals); spec->channels = rf_vals; - } else if (rt2x00_intf_is_usb(rt2x00dev) && - (rt2x00_rf(chip, RF3020) || - rt2x00_rf(chip, RF2020) || - rt2x00_rf(chip, RF3021) || - rt2x00_rf(chip, RF3022))) { - spec->num_channels = ARRAY_SIZE(rf_vals_3070); - spec->channels = rf_vals_3070; + } else if (rt2x00_rf(chip, RF3020) || + rt2x00_rf(chip, RF2020) || + rt2x00_rf(chip, RF3021) || + rt2x00_rf(chip, RF3022)) { + spec->num_channels = ARRAY_SIZE(rf_vals_302x); + spec->channels = rf_vals_302x; } /* -- cgit v0.10.2 From 16475b095a9c952f16e626c142b30bc95cfeadb3 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Sat, 14 Nov 2009 20:20:35 +0100 Subject: rt2x00: Log RT/RF chipset information correctly. Some drivers (rt2800* most notably) cannot set the RF and RT chipset in the correct order to have the information logging in rt2x00_set_chip be correct. Fix this by decoupling the setting of the chipset information from the logging of the chipset information so that drivers can determine themselves when all information is set. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 0f912f5..6e68bc7 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1341,6 +1341,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2x00pci_register_read(rt2x00dev, CSR0, ®); rt2x00_set_chip_rf(rt2x00dev, value, reg); + rt2x00_print_chip(rt2x00dev); if (!rt2x00_rf(&rt2x00dev->chip, RF2420) && !rt2x00_rf(&rt2x00dev->chip, RF2421)) { diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 6618cbd..9a31e5e 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1505,6 +1505,7 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2x00pci_register_read(rt2x00dev, CSR0, ®); rt2x00_set_chip_rf(rt2x00dev, value, reg); + rt2x00_print_chip(rt2x00dev); if (!rt2x00_rf(&rt2x00dev->chip, RF2522) && !rt2x00_rf(&rt2x00dev->chip, RF2523) && diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index bb64473..b2de43e 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1409,6 +1409,7 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, RT2570, value, reg); + rt2x00_print_chip(rt2x00dev); if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) || rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) { diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index d88857c..c710805 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1854,6 +1854,7 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) return -ENODEV; } } + rt2x00_print_chip(rt2x00dev); if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && !rt2x00_rf(&rt2x00dev->chip, RF2850) && diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 62da572..1cbb7ac 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -906,10 +906,6 @@ static inline void rt2x00_eeprom_write(struct rt2x00_dev *rt2x00dev, static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev, const u16 rt, const u16 rf, const u32 rev) { - INFO(rt2x00dev, - "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n", - rt, rf, rev); - rt2x00dev->chip.rt = rt; rt2x00dev->chip.rf = rf; rt2x00dev->chip.rev = rev; @@ -927,6 +923,13 @@ static inline void rt2x00_set_chip_rf(struct rt2x00_dev *rt2x00dev, rt2x00_set_chip(rt2x00dev, rt2x00dev->chip.rt, rf, rev); } +static inline void rt2x00_print_chip(struct rt2x00_dev *rt2x00dev) +{ + INFO(rt2x00dev, + "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n", + rt2x00dev->chip.rt, rt2x00dev->chip.rf, rt2x00dev->chip.rev); +} + static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip) { return (chipset->rt == chip); diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 6e46135..bf04605 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2300,6 +2300,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip_rf(rt2x00dev, value, reg); + rt2x00_print_chip(rt2x00dev); if (!rt2x00_rf(&rt2x00dev->chip, RF5225) && !rt2x00_rf(&rt2x00dev->chip, RF5325) && diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 7236f01..5bbcf66 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1825,6 +1825,7 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, RT2571, value, reg); + rt2x00_print_chip(rt2x00dev); if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0x25730) || rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) { -- cgit v0.10.2 From 31a4cf1f22677ba1ea90be055bc20aac25b8e7c4 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Sat, 14 Nov 2009 20:20:36 +0100 Subject: rt2x00: Fix BUG on rt2800usb when trying to read eFuse EEPROM. Current tree hits a BUG_ON in rt2x00_regbusy_read, because the eFuse EEPROM reading code of rt2800lib uses the function without the csr_mutex locked. Fix this by locking the csr_mutex for the of the EEPROM reading cycly and using the _lock variants of the register reading and writing functions. This also introcudes the register_read_lock function pointer in the rt2800_ops structure. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index c710805..621dac1 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1684,24 +1684,28 @@ static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i) { u32 reg; - rt2800_register_read(rt2x00dev, EFUSE_CTRL, ®); + mutex_lock(&rt2x00dev->csr_mutex); + + rt2800_register_read_lock(rt2x00dev, EFUSE_CTRL, ®); rt2x00_set_field32(®, EFUSE_CTRL_ADDRESS_IN, i); rt2x00_set_field32(®, EFUSE_CTRL_MODE, 0); rt2x00_set_field32(®, EFUSE_CTRL_KICK, 1); - rt2800_register_write(rt2x00dev, EFUSE_CTRL, reg); + rt2800_register_write_lock(rt2x00dev, EFUSE_CTRL, reg); /* Wait until the EEPROM has been loaded */ rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, ®); /* Apparently the data is read from end to start */ - rt2800_register_read(rt2x00dev, EFUSE_DATA3, - (u32 *)&rt2x00dev->eeprom[i]); - rt2800_register_read(rt2x00dev, EFUSE_DATA2, - (u32 *)&rt2x00dev->eeprom[i + 2]); - rt2800_register_read(rt2x00dev, EFUSE_DATA1, - (u32 *)&rt2x00dev->eeprom[i + 4]); - rt2800_register_read(rt2x00dev, EFUSE_DATA0, - (u32 *)&rt2x00dev->eeprom[i + 6]); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, + (u32 *)&rt2x00dev->eeprom[i]); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, + (u32 *)&rt2x00dev->eeprom[i + 2]); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, + (u32 *)&rt2x00dev->eeprom[i + 4]); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0, + (u32 *)&rt2x00dev->eeprom[i + 6]); + + mutex_unlock(&rt2x00dev->csr_mutex); } void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index 7c79011..535ce22 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -23,6 +23,8 @@ struct rt2800_ops { void (*register_read)(struct rt2x00_dev *rt2x00dev, const unsigned int offset, u32 *value); + void (*register_read_lock)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, u32 *value); void (*register_write)(struct rt2x00_dev *rt2x00dev, const unsigned int offset, u32 value); void (*register_write_lock)(struct rt2x00_dev *rt2x00dev, @@ -49,6 +51,15 @@ static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev, rt2800ops->register_read(rt2x00dev, offset, value); } +static inline void rt2800_register_read_lock(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 *value) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + rt2800ops->register_read_lock(rt2x00dev, offset, value); +} + static inline void rt2800_register_write(struct rt2x00_dev *rt2x00dev, const unsigned int offset, u32 value) diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index c7a596f..87a5094 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1089,6 +1089,7 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) static const struct rt2800_ops rt2800pci_rt2800_ops = { .register_read = rt2x00pci_register_read, + .register_read_lock = rt2x00pci_register_read, /* same for PCI */ .register_write = rt2x00pci_register_write, .register_write_lock = rt2x00pci_register_write, /* same for PCI */ diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index b57999b..b1d6393 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -682,6 +682,7 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) static const struct rt2800_ops rt2800usb_rt2800_ops = { .register_read = rt2x00usb_register_read, + .register_read_lock = rt2x00usb_register_read_lock, .register_write = rt2x00usb_register_write, .register_write_lock = rt2x00usb_register_write_lock, -- cgit v0.10.2 From dd6ae4f877ce8cde9f57046a8eea4efc46950502 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 15 Nov 2009 22:27:17 +0100 Subject: ath9k: fix massive rx packet loss issue This patch fixes a regression introduced in "ath9k: avoid the copy skb->cb on every RX'd skb" With that change, the rx status in skb->cb was left uninitialized Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c index acd4bb5..2f1e161 100644 --- a/drivers/net/wireless/ath/ath9k/common.c +++ b/drivers/net/wireless/ath/ath9k/common.c @@ -203,6 +203,7 @@ int ath9k_cmn_rx_skb_preprocess(struct ath_common *common, { struct ath_hw *ah = common->ah; + memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error)) return -EINVAL; -- cgit v0.10.2 From 6a62e5ef94f754892734f99e87ca3dedd3cef277 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Sun, 15 Nov 2009 21:33:18 -0500 Subject: rt2800: do not enable tbtt unless we are in a beacon mode Please be gentle, I'm a fs developer and this is my first foray into drivers, as I'm tired of building ralinks driver everytime I update my kernel. Whenever I load the rt2800pci driver my box bogs down, and a few printk's later I discovered its because I was getting 10's of thousands of TBTT interrupts a second. I discovered this was because we were setting the beacon timer to 0, which is apparently what TBTT keys off of. It seems to me that we should only be enabling TBTT when we are in a beacon transmitting mode, which from what I can tell is in AD-HOC and other such modes where the mac80211 layer would have given us a proper beacon_int to set the beacon timer to instead of 0. So this is my fix, only enable TBTT if our sync mode is for beacon. This makes it so my box doesn't die everytime I load the rt2800pci driver. Let me know if this is acceptable, I just learned all these terms about 15 minutes ago via wikipedia, so I really am not familiar with how this stuff is supposed to work. Thanks, Signed-off-by: Josef Bacik Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 621dac1..e94f1e1 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -561,7 +561,8 @@ void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, + (conf->sync == TSF_SYNC_BEACON)); rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); } -- cgit v0.10.2 From 634a555ce3ee5ea1fdcaee8b4ac9ce7b54f301ac Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Mon, 16 Nov 2009 12:49:43 +0200 Subject: rndis_wlan: handle NL80211_AUTHTYPE_AUTOMATIC rndis_wlan didn't know about NL80211_AUTHTYPE_AUTOMATIC and simple setup with 'iwconfig wlan essid no-encrypt' would fail (ENOSUPP). v2: use NDIS_80211_AUTH_AUTO_SWITCH instead of _OPEN. This will make device try shared key auth first, then open. Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 54175b6..aa1880a 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -1072,6 +1072,8 @@ static int set_auth_mode(struct usbnet *usbdev, u32 wpa_version, auth_mode = NDIS_80211_AUTH_SHARED; else if (auth_type == NL80211_AUTHTYPE_OPEN_SYSTEM) auth_mode = NDIS_80211_AUTH_OPEN; + else if (auth_type == NL80211_AUTHTYPE_AUTOMATIC) + auth_mode = NDIS_80211_AUTH_AUTO_SWITCH; else return -ENOTSUPP; -- cgit v0.10.2 From 2eb2fa67e5462a36e98172fb92c78bc405b3035f Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 16 Nov 2009 08:30:29 -0500 Subject: ath5k: allow setting txpower to 0 As a holdover from earlier code when we used to set the power limit to '0' after a reset to configure the default transmit power, ath5k interprets txpower=0 as 12.5 dBm. Fix that by just passing 0 through. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14567 Cc: stable@kernel.org Reported-by: Daniel Folkers Tested-by: Daniel Folkers Signed-off-by: Bob Copeland Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 8959907..721ec5e 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -3025,8 +3025,6 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower); return -EINVAL; } - if (txpower == 0) - txpower = AR5K_TUNE_DEFAULT_TXPOWER; /* Reset TX power values */ memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); -- cgit v0.10.2 From b23709248fc9b6d5877f9c741d639a160ed21ff6 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 16 Nov 2009 19:54:08 +0200 Subject: mac80211: Do not queue Probe Request frames for station MLME Cooked monitor interfaces cannot currently receive Probe Request frames when the interface is in station mode. However, we do not process Probe Request frames internally in the station MLME, so there is no point in queueing the frame here. Remove Probe Request frames from the queued frame list to allow cooked monitor interfaces to receive these frames. Signed-off-by: Jouni Malinen Reviewed-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index dcc14e9..2af306f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1898,7 +1898,6 @@ ieee80211_rx_result ieee80211_sta_rx_mgmt(struct ieee80211_sub_if_data *sdata, fc = le16_to_cpu(mgmt->frame_control); switch (fc & IEEE80211_FCTL_STYPE) { - case IEEE80211_STYPE_PROBE_REQ: case IEEE80211_STYPE_PROBE_RESP: case IEEE80211_STYPE_BEACON: case IEEE80211_STYPE_AUTH: -- cgit v0.10.2 From c85e9d7739fc8d879c4293ea020760926d6f87cd Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 17 Nov 2009 10:16:32 -0500 Subject: znet: fix build failure from i82593.h relocation znet was including "wireless/i82593.h" (which is a bit wierd), and I missed that when I relocated i82593.h to drivers/staging/wavelan. Since I don't have ISA turned-on in my normal .config, I didn't see the build failures -- mea culpa! Signed-off-by: John W. Linville diff --git a/drivers/net/znet.c b/drivers/net/znet.c index b423473..443c4ee 100644 --- a/drivers/net/znet.c +++ b/drivers/net/znet.c @@ -103,8 +103,7 @@ #include #include -/* This include could be elsewhere, since it is not wireless specific */ -#include "wireless/i82593.h" +#include static char version[] __initdata = "znet.c:v1.02 9/23/94 becker@scyld.com\n"; diff --git a/drivers/staging/wavelan/i82593.h b/drivers/staging/wavelan/i82593.h deleted file mode 100644 index afac5c7..0000000 --- a/drivers/staging/wavelan/i82593.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Definitions for Intel 82593 CSMA/CD Core LAN Controller - * The definitions are taken from the 1992 users manual with Intel - * order number 297125-001. - * - * /usr/src/pc/RCS/i82593.h,v 1.1 1996/07/17 15:23:12 root Exp - * - * Copyright 1994, Anders Klemets - * - * HISTORY - * i82593.h,v - * Revision 1.4 2005/11/4 09:15:00 baroniunas - * Modified copyright with permission of author as follows: - * - * "If I82539.H is the only file with my copyright statement - * that is included in the Source Forge project, then you have - * my approval to change the copyright statement to be a GPL - * license, in the way you proposed on October 10." - * - * Revision 1.1 1996/07/17 15:23:12 root - * Initial revision - * - * Revision 1.3 1995/04/05 15:13:58 adj - * Initial alpha release - * - * Revision 1.2 1994/06/16 23:57:31 klemets - * Mirrored all the fields in the configuration block. - * - * Revision 1.1 1994/06/02 20:25:34 klemets - * Initial revision - * - * - */ -#ifndef _I82593_H -#define _I82593_H - -/* Intel 82593 CSMA/CD Core LAN Controller */ - -/* Port 0 Command Register definitions */ - -/* Execution operations */ -#define OP0_NOP 0 /* CHNL = 0 */ -#define OP0_SWIT_TO_PORT_1 0 /* CHNL = 1 */ -#define OP0_IA_SETUP 1 -#define OP0_CONFIGURE 2 -#define OP0_MC_SETUP 3 -#define OP0_TRANSMIT 4 -#define OP0_TDR 5 -#define OP0_DUMP 6 -#define OP0_DIAGNOSE 7 -#define OP0_TRANSMIT_NO_CRC 9 -#define OP0_RETRANSMIT 12 -#define OP0_ABORT 13 -/* Reception operations */ -#define OP0_RCV_ENABLE 8 -#define OP0_RCV_DISABLE 10 -#define OP0_STOP_RCV 11 -/* Status pointer control operations */ -#define OP0_FIX_PTR 15 /* CHNL = 1 */ -#define OP0_RLS_PTR 15 /* CHNL = 0 */ -#define OP0_RESET 14 - -#define CR0_CHNL (1 << 4) /* 0=Channel 0, 1=Channel 1 */ -#define CR0_STATUS_0 0x00 -#define CR0_STATUS_1 0x20 -#define CR0_STATUS_2 0x40 -#define CR0_STATUS_3 0x60 -#define CR0_INT_ACK (1 << 7) /* 0=No ack, 1=acknowledge */ - -/* Port 0 Status Register definitions */ - -#define SR0_NO_RESULT 0 /* dummy */ -#define SR0_EVENT_MASK 0x0f -#define SR0_IA_SETUP_DONE 1 -#define SR0_CONFIGURE_DONE 2 -#define SR0_MC_SETUP_DONE 3 -#define SR0_TRANSMIT_DONE 4 -#define SR0_TDR_DONE 5 -#define SR0_DUMP_DONE 6 -#define SR0_DIAGNOSE_PASSED 7 -#define SR0_TRANSMIT_NO_CRC_DONE 9 -#define SR0_RETRANSMIT_DONE 12 -#define SR0_EXECUTION_ABORTED 13 -#define SR0_END_OF_FRAME 8 -#define SR0_RECEPTION_ABORTED 10 -#define SR0_DIAGNOSE_FAILED 15 -#define SR0_STOP_REG_HIT 11 - -#define SR0_CHNL (1 << 4) -#define SR0_EXECUTION (1 << 5) -#define SR0_RECEPTION (1 << 6) -#define SR0_INTERRUPT (1 << 7) -#define SR0_BOTH_RX_TX (SR0_EXECUTION | SR0_RECEPTION) - -#define SR3_EXEC_STATE_MASK 0x03 -#define SR3_EXEC_IDLE 0 -#define SR3_TX_ABORT_IN_PROGRESS 1 -#define SR3_EXEC_ACTIVE 2 -#define SR3_ABORT_IN_PROGRESS 3 -#define SR3_EXEC_CHNL (1 << 2) -#define SR3_STP_ON_NO_RSRC (1 << 3) -#define SR3_RCVING_NO_RSRC (1 << 4) -#define SR3_RCV_STATE_MASK 0x60 -#define SR3_RCV_IDLE 0x00 -#define SR3_RCV_READY 0x20 -#define SR3_RCV_ACTIVE 0x40 -#define SR3_RCV_STOP_IN_PROG 0x60 -#define SR3_RCV_CHNL (1 << 7) - -/* Port 1 Command Register definitions */ - -#define OP1_NOP 0 -#define OP1_SWIT_TO_PORT_0 1 -#define OP1_INT_DISABLE 2 -#define OP1_INT_ENABLE 3 -#define OP1_SET_TS 5 -#define OP1_RST_TS 7 -#define OP1_POWER_DOWN 8 -#define OP1_RESET_RING_MNGMT 11 -#define OP1_RESET 14 -#define OP1_SEL_RST 15 - -#define CR1_STATUS_4 0x00 -#define CR1_STATUS_5 0x20 -#define CR1_STATUS_6 0x40 -#define CR1_STOP_REG_UPDATE (1 << 7) - -/* Receive frame status bits */ - -#define RX_RCLD (1 << 0) -#define RX_IA_MATCH (1 << 1) -#define RX_NO_AD_MATCH (1 << 2) -#define RX_NO_SFD (1 << 3) -#define RX_SRT_FRM (1 << 7) -#define RX_OVRRUN (1 << 8) -#define RX_ALG_ERR (1 << 10) -#define RX_CRC_ERR (1 << 11) -#define RX_LEN_ERR (1 << 12) -#define RX_RCV_OK (1 << 13) -#define RX_TYP_LEN (1 << 15) - -/* Transmit status bits */ - -#define TX_NCOL_MASK 0x0f -#define TX_FRTL (1 << 4) -#define TX_MAX_COL (1 << 5) -#define TX_HRT_BEAT (1 << 6) -#define TX_DEFER (1 << 7) -#define TX_UND_RUN (1 << 8) -#define TX_LOST_CTS (1 << 9) -#define TX_LOST_CRS (1 << 10) -#define TX_LTCOL (1 << 11) -#define TX_OK (1 << 13) -#define TX_COLL (1 << 15) - -struct i82593_conf_block { - u_char fifo_limit : 4, - forgnesi : 1, - fifo_32 : 1, - d6mod : 1, - throttle_enb : 1; - u_char throttle : 6, - cntrxint : 1, - contin : 1; - u_char addr_len : 3, - acloc : 1, - preamb_len : 2, - loopback : 2; - u_char lin_prio : 3, - tbofstop : 1, - exp_prio : 3, - bof_met : 1; - u_char : 4, - ifrm_spc : 4; - u_char : 5, - slottim_low : 3; - u_char slottim_hi : 3, - : 1, - max_retr : 4; - u_char prmisc : 1, - bc_dis : 1, - : 1, - crs_1 : 1, - nocrc_ins : 1, - crc_1632 : 1, - : 1, - crs_cdt : 1; - u_char cs_filter : 3, - crs_src : 1, - cd_filter : 3, - : 1; - u_char : 2, - min_fr_len : 6; - u_char lng_typ : 1, - lng_fld : 1, - rxcrc_xf : 1, - artx : 1, - sarec : 1, - tx_jabber : 1, /* why is this called max_len in the manual? */ - hash_1 : 1, - lbpkpol : 1; - u_char : 6, - fdx : 1, - : 1; - u_char dummy_6 : 6, /* supposed to be ones */ - mult_ia : 1, - dis_bof : 1; - u_char dummy_1 : 1, /* supposed to be one */ - tx_ifs_retrig : 2, - mc_all : 1, - rcv_mon : 2, - frag_acpt : 1, - tstrttrs : 1; - u_char fretx : 1, - runt_eop : 1, - hw_sw_pin : 1, - big_endn : 1, - syncrqs : 1, - sttlen : 1, - tx_eop : 1, - rx_eop : 1; - u_char rbuf_size : 5, - rcvstop : 1, - : 2; -}; - -#define I82593_MAX_MULTICAST_ADDRESSES 128 /* Hardware hashed filter */ - -#endif /* _I82593_H */ diff --git a/drivers/staging/wavelan/wavelan_cs.p.h b/drivers/staging/wavelan/wavelan_cs.p.h index 81d9153..8fbfaa8 100644 --- a/drivers/staging/wavelan/wavelan_cs.p.h +++ b/drivers/staging/wavelan/wavelan_cs.p.h @@ -446,7 +446,7 @@ #include /* Wavelan declarations */ -#include "i82593.h" /* Definitions for the Intel chip */ +#include /* Definitions for the Intel chip */ #include "wavelan_cs.h" /* Others bits of the hardware */ diff --git a/include/linux/i82593.h b/include/linux/i82593.h new file mode 100644 index 0000000..afac5c7 --- /dev/null +++ b/include/linux/i82593.h @@ -0,0 +1,229 @@ +/* + * Definitions for Intel 82593 CSMA/CD Core LAN Controller + * The definitions are taken from the 1992 users manual with Intel + * order number 297125-001. + * + * /usr/src/pc/RCS/i82593.h,v 1.1 1996/07/17 15:23:12 root Exp + * + * Copyright 1994, Anders Klemets + * + * HISTORY + * i82593.h,v + * Revision 1.4 2005/11/4 09:15:00 baroniunas + * Modified copyright with permission of author as follows: + * + * "If I82539.H is the only file with my copyright statement + * that is included in the Source Forge project, then you have + * my approval to change the copyright statement to be a GPL + * license, in the way you proposed on October 10." + * + * Revision 1.1 1996/07/17 15:23:12 root + * Initial revision + * + * Revision 1.3 1995/04/05 15:13:58 adj + * Initial alpha release + * + * Revision 1.2 1994/06/16 23:57:31 klemets + * Mirrored all the fields in the configuration block. + * + * Revision 1.1 1994/06/02 20:25:34 klemets + * Initial revision + * + * + */ +#ifndef _I82593_H +#define _I82593_H + +/* Intel 82593 CSMA/CD Core LAN Controller */ + +/* Port 0 Command Register definitions */ + +/* Execution operations */ +#define OP0_NOP 0 /* CHNL = 0 */ +#define OP0_SWIT_TO_PORT_1 0 /* CHNL = 1 */ +#define OP0_IA_SETUP 1 +#define OP0_CONFIGURE 2 +#define OP0_MC_SETUP 3 +#define OP0_TRANSMIT 4 +#define OP0_TDR 5 +#define OP0_DUMP 6 +#define OP0_DIAGNOSE 7 +#define OP0_TRANSMIT_NO_CRC 9 +#define OP0_RETRANSMIT 12 +#define OP0_ABORT 13 +/* Reception operations */ +#define OP0_RCV_ENABLE 8 +#define OP0_RCV_DISABLE 10 +#define OP0_STOP_RCV 11 +/* Status pointer control operations */ +#define OP0_FIX_PTR 15 /* CHNL = 1 */ +#define OP0_RLS_PTR 15 /* CHNL = 0 */ +#define OP0_RESET 14 + +#define CR0_CHNL (1 << 4) /* 0=Channel 0, 1=Channel 1 */ +#define CR0_STATUS_0 0x00 +#define CR0_STATUS_1 0x20 +#define CR0_STATUS_2 0x40 +#define CR0_STATUS_3 0x60 +#define CR0_INT_ACK (1 << 7) /* 0=No ack, 1=acknowledge */ + +/* Port 0 Status Register definitions */ + +#define SR0_NO_RESULT 0 /* dummy */ +#define SR0_EVENT_MASK 0x0f +#define SR0_IA_SETUP_DONE 1 +#define SR0_CONFIGURE_DONE 2 +#define SR0_MC_SETUP_DONE 3 +#define SR0_TRANSMIT_DONE 4 +#define SR0_TDR_DONE 5 +#define SR0_DUMP_DONE 6 +#define SR0_DIAGNOSE_PASSED 7 +#define SR0_TRANSMIT_NO_CRC_DONE 9 +#define SR0_RETRANSMIT_DONE 12 +#define SR0_EXECUTION_ABORTED 13 +#define SR0_END_OF_FRAME 8 +#define SR0_RECEPTION_ABORTED 10 +#define SR0_DIAGNOSE_FAILED 15 +#define SR0_STOP_REG_HIT 11 + +#define SR0_CHNL (1 << 4) +#define SR0_EXECUTION (1 << 5) +#define SR0_RECEPTION (1 << 6) +#define SR0_INTERRUPT (1 << 7) +#define SR0_BOTH_RX_TX (SR0_EXECUTION | SR0_RECEPTION) + +#define SR3_EXEC_STATE_MASK 0x03 +#define SR3_EXEC_IDLE 0 +#define SR3_TX_ABORT_IN_PROGRESS 1 +#define SR3_EXEC_ACTIVE 2 +#define SR3_ABORT_IN_PROGRESS 3 +#define SR3_EXEC_CHNL (1 << 2) +#define SR3_STP_ON_NO_RSRC (1 << 3) +#define SR3_RCVING_NO_RSRC (1 << 4) +#define SR3_RCV_STATE_MASK 0x60 +#define SR3_RCV_IDLE 0x00 +#define SR3_RCV_READY 0x20 +#define SR3_RCV_ACTIVE 0x40 +#define SR3_RCV_STOP_IN_PROG 0x60 +#define SR3_RCV_CHNL (1 << 7) + +/* Port 1 Command Register definitions */ + +#define OP1_NOP 0 +#define OP1_SWIT_TO_PORT_0 1 +#define OP1_INT_DISABLE 2 +#define OP1_INT_ENABLE 3 +#define OP1_SET_TS 5 +#define OP1_RST_TS 7 +#define OP1_POWER_DOWN 8 +#define OP1_RESET_RING_MNGMT 11 +#define OP1_RESET 14 +#define OP1_SEL_RST 15 + +#define CR1_STATUS_4 0x00 +#define CR1_STATUS_5 0x20 +#define CR1_STATUS_6 0x40 +#define CR1_STOP_REG_UPDATE (1 << 7) + +/* Receive frame status bits */ + +#define RX_RCLD (1 << 0) +#define RX_IA_MATCH (1 << 1) +#define RX_NO_AD_MATCH (1 << 2) +#define RX_NO_SFD (1 << 3) +#define RX_SRT_FRM (1 << 7) +#define RX_OVRRUN (1 << 8) +#define RX_ALG_ERR (1 << 10) +#define RX_CRC_ERR (1 << 11) +#define RX_LEN_ERR (1 << 12) +#define RX_RCV_OK (1 << 13) +#define RX_TYP_LEN (1 << 15) + +/* Transmit status bits */ + +#define TX_NCOL_MASK 0x0f +#define TX_FRTL (1 << 4) +#define TX_MAX_COL (1 << 5) +#define TX_HRT_BEAT (1 << 6) +#define TX_DEFER (1 << 7) +#define TX_UND_RUN (1 << 8) +#define TX_LOST_CTS (1 << 9) +#define TX_LOST_CRS (1 << 10) +#define TX_LTCOL (1 << 11) +#define TX_OK (1 << 13) +#define TX_COLL (1 << 15) + +struct i82593_conf_block { + u_char fifo_limit : 4, + forgnesi : 1, + fifo_32 : 1, + d6mod : 1, + throttle_enb : 1; + u_char throttle : 6, + cntrxint : 1, + contin : 1; + u_char addr_len : 3, + acloc : 1, + preamb_len : 2, + loopback : 2; + u_char lin_prio : 3, + tbofstop : 1, + exp_prio : 3, + bof_met : 1; + u_char : 4, + ifrm_spc : 4; + u_char : 5, + slottim_low : 3; + u_char slottim_hi : 3, + : 1, + max_retr : 4; + u_char prmisc : 1, + bc_dis : 1, + : 1, + crs_1 : 1, + nocrc_ins : 1, + crc_1632 : 1, + : 1, + crs_cdt : 1; + u_char cs_filter : 3, + crs_src : 1, + cd_filter : 3, + : 1; + u_char : 2, + min_fr_len : 6; + u_char lng_typ : 1, + lng_fld : 1, + rxcrc_xf : 1, + artx : 1, + sarec : 1, + tx_jabber : 1, /* why is this called max_len in the manual? */ + hash_1 : 1, + lbpkpol : 1; + u_char : 6, + fdx : 1, + : 1; + u_char dummy_6 : 6, /* supposed to be ones */ + mult_ia : 1, + dis_bof : 1; + u_char dummy_1 : 1, /* supposed to be one */ + tx_ifs_retrig : 2, + mc_all : 1, + rcv_mon : 2, + frag_acpt : 1, + tstrttrs : 1; + u_char fretx : 1, + runt_eop : 1, + hw_sw_pin : 1, + big_endn : 1, + syncrqs : 1, + sttlen : 1, + tx_eop : 1, + rx_eop : 1; + u_char rbuf_size : 5, + rcvstop : 1, + : 2; +}; + +#define I82593_MAX_MULTICAST_ADDRESSES 128 /* Hardware hashed filter */ + +#endif /* _I82593_H */ -- cgit v0.10.2