From f98eeb4eb1c52de89dcefeb538029bcecc6dd42d Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 9 Jan 2008 11:27:23 -0600 Subject: [POWERPC] Fix handling of memreserve if the range lands in highmem There were several issues if a memreserve range existed and happened to be in highmem: * The bootmem allocator is only aware of lowmem so calling reserve_bootmem with a highmem address would cause a BUG_ON * All highmem pages were provided to the buddy allocator Added a lmb_is_reserved() api that we now use to determine if a highem page should continue to be PageReserved or provided to the buddy allocator. Also, we incorrectly reported the amount of pages reserved since all highmem pages are initally marked reserved and we clear the PageReserved flag as we "free" up the highmem pages. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c index 8f4d2dc..4ce23bc 100644 --- a/arch/powerpc/mm/lmb.c +++ b/arch/powerpc/mm/lmb.c @@ -342,3 +342,16 @@ void __init lmb_enforce_memory_limit(unsigned long memory_limit) } } } + +int __init lmb_is_reserved(unsigned long addr) +{ + int i; + + for (i = 0; i < lmb.reserved.cnt; i++) { + unsigned long upper = lmb.reserved.region[i].base + + lmb.reserved.region[i].size - 1; + if ((addr >= lmb.reserved.region[i].base) && (addr <= upper)) + return 1; + } + return 0; +} diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 5402fb6b..e812244 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -213,15 +213,30 @@ void __init do_init_bootmem(void) */ #ifdef CONFIG_HIGHMEM free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT); + + /* reserve the sections we're already using */ + for (i = 0; i < lmb.reserved.cnt; i++) { + unsigned long addr = lmb.reserved.region[i].base + + lmb_size_bytes(&lmb.reserved, i) - 1; + if (addr < total_lowmem) + reserve_bootmem(lmb.reserved.region[i].base, + lmb_size_bytes(&lmb.reserved, i)); + else if (lmb.reserved.region[i].base < total_lowmem) { + unsigned long adjusted_size = total_lowmem - + lmb.reserved.region[i].base; + reserve_bootmem(lmb.reserved.region[i].base, + adjusted_size); + } + } #else free_bootmem_with_active_regions(0, max_pfn); -#endif /* reserve the sections we're already using */ for (i = 0; i < lmb.reserved.cnt; i++) reserve_bootmem(lmb.reserved.region[i].base, lmb_size_bytes(&lmb.reserved, i)); +#endif /* XXX need to clip this if using highmem? */ sparse_memory_present_with_active_regions(0); @@ -334,11 +349,13 @@ void __init mem_init(void) highmem_mapnr = total_lowmem >> PAGE_SHIFT; for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) { struct page *page = pfn_to_page(pfn); - + if (lmb_is_reserved(pfn << PAGE_SHIFT)) + continue; ClearPageReserved(page); init_page_count(page); __free_page(page); totalhigh_pages++; + reservedpages--; } totalram_pages += totalhigh_pages; printk(KERN_DEBUG "High memory: %luk\n", diff --git a/include/asm-powerpc/lmb.h b/include/asm-powerpc/lmb.h index b5f9f4c..5d1dc48 100644 --- a/include/asm-powerpc/lmb.h +++ b/include/asm-powerpc/lmb.h @@ -51,6 +51,7 @@ extern unsigned long __init __lmb_alloc_base(unsigned long size, extern unsigned long __init lmb_phys_mem_size(void); extern unsigned long __init lmb_end_of_DRAM(void); extern void __init lmb_enforce_memory_limit(unsigned long memory_limit); +extern int __init lmb_is_reserved(unsigned long addr); extern void lmb_dump_all(void); -- cgit v0.10.2 From 96d69c31c5115341c6c1163aa3d591c2da687a76 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 12 Jan 2008 17:23:26 -0600 Subject: [POWERPC] Ensure we only handle PowerMac PCI bus fixup for memory resources The fixup code that handles the case for PowerMac's that leave bridge windows open over an inaccessible region should only be applied to memory resources (IORESOURCE_MEM). If not we can get it trying to fixup IORESOURCE_IO on some systems since the other conditions that are used to detect the case can easily match for IORESOURCE_IO. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index d394d41..7d0afd4 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -806,7 +806,8 @@ static void __devinit __pcibios_fixup_bus(struct pci_bus *bus) * equal to the pci_mem_offset of the host bridge and * their size is smaller than 1M. */ - if (res->start == hose->pci_mem_offset && + if (res->flags & IORESOURCE_MEM && + res->start == hose->pci_mem_offset && res->end < 0x100000) { printk(KERN_INFO "PCI: Closing bogus Apple Firmware" -- cgit v0.10.2 From b188b2aefe2b0e7d34c98106e20214f806f812a3 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 14 Jan 2008 09:41:36 -0600 Subject: [POWERPC] Fixup transparent P2P resources For transparent P2P bridges the first 3 resources may get set from based on BAR registers and need to get fixed up. Where as the remainder come from the parent bus and have already been fixed up. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 7d0afd4..980fe32 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -792,9 +792,10 @@ static void __devinit __pcibios_fixup_bus(struct pci_bus *bus) for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { if ((res = bus->resource[i]) == NULL) continue; - if (!res->flags || bus->self->transparent) + if (!res->flags) + continue; + if (i >= 3 && bus->self->transparent) continue; - /* On PowerMac, Apple leaves bridge windows open over * an inaccessible region of memory space (0...fffff) * which is somewhat bogus, but that's what they think -- cgit v0.10.2 From 72b122cc301858dcf283fe6731e61322c9772cf4 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 14 Jan 2008 17:02:19 -0600 Subject: [POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xx The current PCI code for Freescale 85xx/86xx was treating the virtual P2P PCIe bridge as a transparent bridge. Rather than doing that fixup the virtual P2P bridge by copying the resources from the PHB. Also, fixup a bit of the code for dealing with resource_size_t being 64-bits and how we set ATMU registers for >4G. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 4b1d512..bf13c21 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -33,8 +33,8 @@ void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc) struct ccsr_pci __iomem *pci; int i; - pr_debug("PCI memory map start 0x%x, size 0x%x\n", rsrc->start, - rsrc->end - rsrc->start + 1); + pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n", + (u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1); pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1); /* Disable all windows (except powar0 since its ignored) */ @@ -46,17 +46,17 @@ void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc) /* Setup outbound MEM window */ for(i = 0; i < 3; i++) if (hose->mem_resources[i].flags & IORESOURCE_MEM){ - pr_debug("PCI MEM resource start 0x%08x, size 0x%08x.\n", - hose->mem_resources[i].start, - hose->mem_resources[i].end - - hose->mem_resources[i].start + 1); - out_be32(&pci->pow[i+1].potar, - (hose->mem_resources[i].start >> 12) - & 0x000fffff); + resource_size_t pci_addr_start = + hose->mem_resources[i].start - + hose->pci_mem_offset; + pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n", + (u64)hose->mem_resources[i].start, + (u64)hose->mem_resources[i].end + - (u64)hose->mem_resources[i].start + 1); + out_be32(&pci->pow[i+1].potar, (pci_addr_start >> 12)); out_be32(&pci->pow[i+1].potear, 0); out_be32(&pci->pow[i+1].powbar, - (hose->mem_resources[i].start >> 12) - & 0x000fffff); + (hose->mem_resources[i].start >> 12)); /* Enable, Mem R/W */ out_be32(&pci->pow[i+1].powar, 0x80044000 | (__ilog2(hose->mem_resources[i].end @@ -65,15 +65,14 @@ void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc) /* Setup outbound IO window */ if (hose->io_resource.flags & IORESOURCE_IO){ - pr_debug("PCI IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n", - hose->io_resource.start, - hose->io_resource.end - hose->io_resource.start + 1, - hose->io_base_phys); - out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12) - & 0x000fffff); + pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, " + "phy base 0x%016llx.\n", + (u64)hose->io_resource.start, + (u64)hose->io_resource.end - (u64)hose->io_resource.start + 1, + (u64)hose->io_base_phys); + out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12)); out_be32(&pci->pow[i+1].potear, 0); - out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12) - & 0x000fffff); + out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12)); /* Enable, IO R/W */ out_be32(&pci->pow[i+1].powar, 0x80088000 | (__ilog2(hose->io_resource.end @@ -107,55 +106,17 @@ void __init setup_pci_cmd(struct pci_controller *hose) } } -static void __init quirk_fsl_pcie_transparent(struct pci_dev *dev) -{ - struct resource *res; - int i, res_idx = PCI_BRIDGE_RESOURCES; - struct pci_controller *hose; +static int fsl_pcie_bus_fixup; +static void __init quirk_fsl_pcie_header(struct pci_dev *dev) +{ /* if we aren't a PCIe don't bother */ if (!pci_find_capability(dev, PCI_CAP_ID_EXP)) return ; - /* - * Make the bridge be transparent. - */ - dev->transparent = 1; - - hose = pci_bus_to_host(dev->bus); - if (!hose) { - printk(KERN_ERR "Can't find hose for bus %d\n", - dev->bus->number); - return; - } - - /* Clear out any of the virtual P2P bridge registers */ - pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0); - pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, 0); - pci_write_config_byte(dev, PCI_IO_BASE, 0x10); - pci_write_config_byte(dev, PCI_IO_LIMIT, 0); - pci_write_config_word(dev, PCI_MEMORY_BASE, 0x10); - pci_write_config_word(dev, PCI_MEMORY_LIMIT, 0); - pci_write_config_word(dev, PCI_PREF_BASE_UPPER32, 0x0); - pci_write_config_word(dev, PCI_PREF_LIMIT_UPPER32, 0x0); - pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10); - pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0); - - if (hose->io_resource.flags) { - res = &dev->resource[res_idx++]; - res->start = hose->io_resource.start; - res->end = hose->io_resource.end; - res->flags = hose->io_resource.flags; - update_bridge_resource(dev, res); - } - - for (i = 0; i < 3; i++) { - res = &dev->resource[res_idx + i]; - res->start = hose->mem_resources[i].start; - res->end = hose->mem_resources[i].end; - res->flags = hose->mem_resources[i].flags; - update_bridge_resource(dev, res); - } + dev->class = PCI_CLASS_BRIDGE_PCI << 8; + fsl_pcie_bus_fixup = 1; + return ; } int __init fsl_pcie_check_link(struct pci_controller *hose) @@ -172,11 +133,24 @@ void fsl_pcibios_fixup_bus(struct pci_bus *bus) struct pci_controller *hose = (struct pci_controller *) bus->sysdata; int i; - /* deal with bogus pci_bus when we don't have anything connected on PCIe */ - if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) { - if (bus->parent) { - for (i = 0; i < 4; ++i) - bus->resource[i] = bus->parent->resource[i]; + if ((bus->parent == hose->bus) && + ((fsl_pcie_bus_fixup && + early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) || + (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK))) + { + for (i = 0; i < 4; ++i) { + struct resource *res = bus->resource[i]; + struct resource *par = bus->parent->resource[i]; + if (res) { + res->start = 0; + res->end = 0; + res->flags = 0; + } + if (res && par) { + res->start = par->start; + res->end = par->end; + res->flags = par->flags; + } } } } @@ -240,23 +214,23 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) return 0; } -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header); -- cgit v0.10.2 From 82f0183ef3c8832684ec460cfbd4693cc8732a7a Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 14 Jan 2008 20:42:53 -0600 Subject: [POWERPC] Remove update_bridge_resource The 85xx/86xx pci code no longer uses update_bridge_resource and it was the only caller. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 14e300f..88db4ff 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -94,64 +94,6 @@ fixup_cpc710_pci64(struct pci_dev* dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64); - -void __init -update_bridge_resource(struct pci_dev *dev, struct resource *res) -{ - u8 io_base_lo, io_limit_lo; - u16 mem_base, mem_limit; - u16 cmd; - resource_size_t start, end, off; - struct pci_controller *hose = dev->sysdata; - - if (!hose) { - printk("update_bridge_base: no hose?\n"); - return; - } - pci_read_config_word(dev, PCI_COMMAND, &cmd); - pci_write_config_word(dev, PCI_COMMAND, - cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)); - if (res->flags & IORESOURCE_IO) { - off = (unsigned long) hose->io_base_virt - isa_io_base; - start = res->start - off; - end = res->end - off; - io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK; - io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK; - if (end > 0xffff) - io_base_lo |= PCI_IO_RANGE_TYPE_32; - else - io_base_lo |= PCI_IO_RANGE_TYPE_16; - pci_write_config_word(dev, PCI_IO_BASE_UPPER16, - start >> 16); - pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, - end >> 16); - pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo); - pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo); - - } else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH)) - == IORESOURCE_MEM) { - off = hose->pci_mem_offset; - mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK; - mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK; - pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base); - pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit); - - } else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH)) - == (IORESOURCE_MEM | IORESOURCE_PREFETCH)) { - off = hose->pci_mem_offset; - mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK; - mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK; - pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base); - pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit); - - } else { - DBG(KERN_ERR "PCI: ugh, bridge %s res has flags=%lx\n", - pci_name(dev), res->flags); - } - pci_write_config_word(dev, PCI_COMMAND, cmd); -} - - #ifdef CONFIG_PPC_OF /* * Functions below are used on OpenFirmware machines. diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h index a6ea49e..e5802c6 100644 --- a/include/asm-powerpc/pci-bridge.h +++ b/include/asm-powerpc/pci-bridge.h @@ -152,9 +152,6 @@ extern void setup_indirect_pci(struct pci_controller* hose, resource_size_t cfg_addr, resource_size_t cfg_data, u32 flags); extern void setup_grackle(struct pci_controller *hose); -extern void __init update_bridge_resource(struct pci_dev *dev, - struct resource *res); - #else /* CONFIG_PPC64 */ /* -- cgit v0.10.2 From c51a3fdc0a950dc65b4d552497e54cf60677f8a5 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 14 Jan 2008 20:56:18 -0600 Subject: [POWERPC] Fixup use of phys_addr_t in mpic code The mpic_map() and __mpic_map_mmio() need to use phys_addr_t for the physical address they are passed. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index f88ff09..0da7069 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -267,7 +267,7 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, */ -static void _mpic_map_mmio(struct mpic *mpic, unsigned long phys_addr, +static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr, struct mpic_reg_bank *rb, unsigned int offset, unsigned int size) { @@ -287,7 +287,7 @@ static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb, BUG_ON(!DCR_MAP_OK(rb->dhost)); } -static inline void mpic_map(struct mpic *mpic, unsigned long phys_addr, +static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr, struct mpic_reg_bank *rb, unsigned int offset, unsigned int size) { -- cgit v0.10.2 From 277982e2d8a240576359e44b3f98c490861fc1ad Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 15 Jan 2008 09:42:36 -0600 Subject: [POWERPC] 85xx: convert boards to use machine_device_initcall Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index bccdc25..eb0a46b 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -233,13 +233,11 @@ static struct of_device_id __initdata of_bus_ids[] = { static int __init declare_of_platform_devices(void) { - if (!machine_is(mpc85xx_ads)) - return 0; - of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; } -device_initcall(declare_of_platform_devices); +machine_device_initcall(mpc85xx_ads, declare_of_platform_devices); /* * Called very early, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 4d063ee..8b1de78 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -222,9 +222,6 @@ static int mpc85xx_cds_8259_attach(void) struct device_node *cascade_node = NULL; int cascade_irq; - if (!machine_is(mpc85xx_cds)) - return 0; - /* Initialize the i8259 controller */ for_each_node_by_type(np, "interrupt-controller") if (of_device_is_compatible(np, "chrp,iic")) { @@ -262,8 +259,7 @@ static int mpc85xx_cds_8259_attach(void) return 0; } - -device_initcall(mpc85xx_cds_8259_attach); +machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach); #endif /* CONFIG_PPC_I8259 */ diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index e6c63a5..4fdf5ab 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -144,15 +144,12 @@ static struct of_device_id mpc85xx_ids[] = { static int __init mpc85xx_publish_devices(void) { - if (!machine_is(mpc85xx_mds)) - return 0; - /* Publish the QE devices */ - of_platform_bus_probe(NULL,mpc85xx_ids,NULL); + of_platform_bus_probe(NULL, mpc85xx_ids, NULL); return 0; } -device_initcall(mpc85xx_publish_devices); +machine_device_initcall(mpc85xx_mds, mpc85xx_publish_devices); static void __init mpc85xx_mds_pic_init(void) { -- cgit v0.10.2 From 6392f1845b54eefbfa5f3569155451949d250b6d Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 15 Jan 2008 09:47:10 -0600 Subject: [POWERPC] 83xx: convert boards to use machine_device_initcall Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index 1e570bb..dbdd4ad 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -110,15 +110,12 @@ static struct of_device_id mpc832x_ids[] = { static int __init mpc832x_declare_of_platform_devices(void) { - if (!machine_is(mpc832x_mds)) - return 0; - /* Publish the QE devices */ of_platform_bus_probe(NULL, mpc832x_ids, NULL); return 0; } -device_initcall(mpc832x_declare_of_platform_devices); +machine_device_initcall(mpc832x_mds, mpc832x_declare_of_platform_devices); static void __init mpc832x_sys_init_IRQ(void) { diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c index ffb2e93..5fddd22 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c @@ -63,9 +63,6 @@ static struct spi_board_info mpc832x_spi_boardinfo = { static int __init mpc832x_spi_init(void) { - if (!machine_is(mpc832x_rdb)) - return 0; - par_io_config_pin(3, 0, 3, 0, 1, 0); /* SPI1 MOSI, I/O */ par_io_config_pin(3, 1, 3, 0, 1, 0); /* SPI1 MISO, I/O */ par_io_config_pin(3, 2, 3, 0, 1, 0); /* SPI1 CLK, I/O */ @@ -80,7 +77,7 @@ static int __init mpc832x_spi_init(void) mpc83xx_spi_deactivate_cs); } -device_initcall(mpc832x_spi_init); +machine_device_initcall(mpc832x_rdb, mpc832x_spi_init); /* ************************************************************************ * @@ -123,15 +120,12 @@ static struct of_device_id mpc832x_ids[] = { static int __init mpc832x_declare_of_platform_devices(void) { - if (!machine_is(mpc832x_rdb)) - return 0; - /* Publish the QE devices */ of_platform_bus_probe(NULL, mpc832x_ids, NULL); return 0; } -device_initcall(mpc832x_declare_of_platform_devices); +machine_device_initcall(mpc832x_rdb, mpc832x_declare_of_platform_devices); void __init mpc832x_rdb_init_IRQ(void) { diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index 459fb72..2b8a0a3 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -115,13 +115,10 @@ static struct of_device_id mpc834x_ids[] = { static int __init mpc834x_declare_of_platform_devices(void) { - if (!machine_is(mpc834x_mds)) - return 0; - of_platform_bus_probe(NULL, mpc834x_ids, NULL); return 0; } -device_initcall(mpc834x_declare_of_platform_devices); +machine_device_initcall(mpc834x_mds, mpc834x_declare_of_platform_devices); /* * Called very early, MMU is off, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c index 2ac9890..db491ec 100644 --- a/arch/powerpc/platforms/83xx/mpc836x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -141,15 +141,12 @@ static struct of_device_id mpc836x_ids[] = { static int __init mpc836x_declare_of_platform_devices(void) { - if (!machine_is(mpc836x_mds)) - return 0; - /* Publish the QE devices */ of_platform_bus_probe(NULL, mpc836x_ids, NULL); return 0; } -device_initcall(mpc836x_declare_of_platform_devices); +machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices); static void __init mpc836x_mds_init_IRQ(void) { diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c index 9cdc32b..cfd0548 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -50,15 +50,12 @@ static struct of_device_id mpc837x_ids[] = { static int __init mpc837x_declare_of_platform_devices(void) { - if (!machine_is(mpc837x_mds)) - return 0; - /* Publish of_device */ of_platform_bus_probe(NULL, mpc837x_ids, NULL); return 0; } -device_initcall(mpc837x_declare_of_platform_devices); +machine_device_initcall(mpc837x_mds, mpc837x_declare_of_platform_devices); static void __init mpc837x_mds_init_IRQ(void) { -- cgit v0.10.2 From ad160681c8caa0a73e6abd3ac606cd857608f94a Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 15 Jan 2008 09:30:32 -0600 Subject: [POWERPC] bootwrapper: Add find_node_by_alias and dt_fixup_mac_address_by_alias Add the ability to set the mac address given the alias for the device. Removes the need for having a linux,network-index property. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c index e5dfe44..60f561e 100644 --- a/arch/powerpc/boot/devtree.c +++ b/arch/powerpc/boot/devtree.c @@ -88,6 +88,20 @@ void dt_fixup_clock(const char *path, u32 freq) } } +void dt_fixup_mac_address_by_alias(const char *alias, const u8 *addr) +{ + void *devp = find_node_by_alias(alias); + + if (devp) { + printf("%s: local-mac-address <-" + " %02x:%02x:%02x:%02x:%02x:%02x\n\r", alias, + addr[0], addr[1], addr[2], + addr[3], addr[4], addr[5]); + + setprop(devp, "local-mac-address", addr, 6); + } +} + void dt_fixup_mac_address(u32 index, const u8 *addr) { void *devp = find_node_by_prop_value(NULL, "linux,network-index", diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index 6036a98..5872ef1 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -159,9 +159,23 @@ static inline void *find_node_by_devtype(const void *prev, return find_node_by_prop_value_str(prev, "device_type", type); } +static inline void *find_node_by_alias(const char *alias) +{ + void *devp = finddevice("/aliases"); + + if (devp) { + char path[MAX_PATH_LEN]; + if (getprop(devp, alias, path, MAX_PATH_LEN) > 0) + return finddevice(path); + } + + return NULL; +} + void dt_fixup_memory(u64 start, u64 size); void dt_fixup_cpu_clocks(u32 cpufreq, u32 tbfreq, u32 busfreq); void dt_fixup_clock(const char *path, u32 freq); +void dt_fixup_mac_address_by_alias(const char *alias, const u8 *addr); void dt_fixup_mac_address(u32 index, const u8 *addr); void __dt_fixup_mac_addresses(u32 startindex, ...); #define dt_fixup_mac_addresses(...) \ -- cgit v0.10.2 From 3e6f4394ab3ae4480593d5f2612a0d92fd39bf07 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 15 Jan 2008 09:33:56 -0600 Subject: [POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/cuboot-83xx.c b/arch/powerpc/boot/cuboot-83xx.c index acd860e..61af1c1 100644 --- a/arch/powerpc/boot/cuboot-83xx.c +++ b/arch/powerpc/boot/cuboot-83xx.c @@ -24,7 +24,8 @@ static void platform_fixups(void) void *soc; dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); - dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); /* Unfortunately, the specific model number is encoded in the diff --git a/arch/powerpc/boot/cuboot-85xx.c b/arch/powerpc/boot/cuboot-85xx.c index 943779e..6776a1a 100644 --- a/arch/powerpc/boot/cuboot-85xx.c +++ b/arch/powerpc/boot/cuboot-85xx.c @@ -24,8 +24,9 @@ static void platform_fixups(void) void *soc; dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); - dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr, - bd.bi_enet2addr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr); dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq); /* Unfortunately, the specific model number is encoded in the -- cgit v0.10.2 From 93967ae20a04f77effe5e3106d98790d19796195 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 17 Jan 2008 22:32:49 -0600 Subject: [POWERPC] Fix incorrect interrupt map on FSL reference boards The ULI based boards had the interrupt maps for USB on the ULI incorrectly set. Also, the MPC8572DS was missing the interrupt-map-mask for the 3rd PCIe controller. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 54b3bdf..688af9d 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -304,9 +304,9 @@ interrupt-map = < // IDSEL 0x1c USB e000 0 0 1 &i8259 c 2 - e100 0 0 1 &i8259 9 2 - e200 0 0 1 &i8259 a 2 - e300 0 0 1 &i8259 b 2 + e100 0 0 2 &i8259 9 2 + e200 0 0 3 &i8259 a 2 + e300 0 0 4 &i8259 b 2 // IDSEL 0x1d Audio e800 0 0 1 &i8259 6 2 diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index 233e0d5..813c259 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -334,9 +334,9 @@ // IDSEL 0x1c USB e000 0 0 1 &i8259 c 2 - e100 0 0 1 &i8259 9 2 - e200 0 0 1 &i8259 a 2 - e300 0 0 1 &i8259 b 2 + e100 0 0 2 &i8259 9 2 + e200 0 0 3 &i8259 a 2 + e300 0 0 4 &i8259 b 2 // IDSEL 0x1d Audio e800 0 0 1 &i8259 6 2 @@ -481,6 +481,7 @@ clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <1b 2>; + interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x0 */ 0000 0 0 1 &mpic 0 1 diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 86fc228..a719179 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -326,9 +326,9 @@ // IDSEL 0x1c USB e000 0 0 1 &i8259 c 2 - e100 0 0 1 &i8259 9 2 - e200 0 0 1 &i8259 a 2 - e300 0 0 1 &i8259 b 2 + e100 0 0 2 &i8259 9 2 + e200 0 0 3 &i8259 a 2 + e300 0 0 4 &i8259 b 2 // IDSEL 0x1d Audio e800 0 0 1 &i8259 6 2 -- cgit v0.10.2 From 5761bc5dae656b96e4bb22fd05480e5beddab24c Mon Sep 17 00:00:00 2001 From: Li Yang Date: Mon, 7 Jan 2008 20:03:18 +0800 Subject: [POWERPC] 83xx: add device trees for MPC837x MDS board Signed-off-by: Li Yang Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts new file mode 100644 index 0000000..98b4606 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -0,0 +1,279 @@ +/* + * MPC8377E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8377emds"; + compatible = "fsl,mpc8377emds","fsl,mpc837xmds"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8377@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; + i-cache-line-size = <0x20>; + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0xe 0x8>; + interrupt-parent = < &ipic >; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0xf 0x8>; + interrupt-parent = < &ipic >; + dfsrr; + }; + + spi@7000 { + compatible = "fsl_spi"; + reg = <0x7000 0x1000>; + interrupts = <0x10 0x8>; + interrupt-parent = < &ipic >; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = < &ipic >; + interrupts = <0x26 0x8>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = < &ipic >; + interrupts = <0x11 0x8>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = < &ipic >; + interrupts = <0x12 0x8>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>; + phy-connection-type = "mii"; + interrupt-parent = < &ipic >; + phy-handle = < &phy2 >; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>; + phy-connection-type = "mii"; + interrupt-parent = < &ipic >; + phy-handle = < &phy3 >; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x9 0x8>; + interrupt-parent = < &ipic >; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0xa 0x8>; + interrupt-parent = < &ipic >; + }; + + crypto@30000 { + model = "SEC3"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <0xb 0x8>; + interrupt-parent = < &ipic >; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <0x18>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sdhc@2e000 { + model = "eSDHC"; + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <0x2a 0x8>; + interrupt-parent = < &ipic >; + }; + + sata@18000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x18000 0x1000>; + interrupts = <0x2c 0x8>; + interrupt-parent = < &ipic >; + }; + + sata@19000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x19000 0x1000>; + interrupts = <0x2d 0x8>; + interrupt-parent = < &ipic >; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + }; + + pci0: pci@e0008500 { + cell-index = <0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 0x14 0x8 + 0x8800 0x0 0x0 0x2 &ipic 0x15 0x8 + 0x8800 0x0 0x0 0x3 &ipic 0x16 0x8 + 0x8800 0x0 0x0 0x4 &ipic 0x17 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 0x16 0x8 + 0x9000 0x0 0x0 0x2 &ipic 0x17 0x8 + 0x9000 0x0 0x0 0x3 &ipic 0x14 0x8 + 0x9000 0x0 0x0 0x4 &ipic 0x15 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 0x17 0x8 + 0x9800 0x0 0x0 0x2 &ipic 0x14 0x8 + 0x9800 0x0 0x0 0x3 &ipic 0x15 0x8 + 0x9800 0x0 0x0 0x4 &ipic 0x16 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 0x14 0x8 + 0xa800 0x0 0x0 0x2 &ipic 0x15 0x8 + 0xa800 0x0 0x0 0x3 &ipic 0x16 0x8 + 0xa800 0x0 0x0 0x4 &ipic 0x17 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 0x17 0x8 + 0xb000 0x0 0x0 0x2 &ipic 0x14 0x8 + 0xb000 0x0 0x0 0x3 &ipic 0x15 0x8 + 0xb000 0x0 0x0 0x4 &ipic 0x16 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 0x16 0x8 + 0xb800 0x0 0x0 0x2 &ipic 0x17 0x8 + 0xb800 0x0 0x0 0x3 &ipic 0x14 0x8 + 0xb800 0x0 0x0 0x4 &ipic 0x15 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 0x15 0x8 + 0xc000 0x0 0x0 0x2 &ipic 0x16 0x8 + 0xc000 0x0 0x0 0x3 &ipic 0x17 0x8 + 0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>; + interrupt-parent = < &ipic >; + interrupts = <0x42 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts new file mode 100644 index 0000000..c117a6a --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -0,0 +1,265 @@ +/* + * MPC8378E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8378emds"; + compatible = "fsl,mpc8378emds","fsl,mpc837xmds"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8378@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; + i-cache-line-size = <0x20>; + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0xe 0x8>; + interrupt-parent = < &ipic >; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0xf 0x8>; + interrupt-parent = < &ipic >; + dfsrr; + }; + + spi@7000 { + compatible = "fsl_spi"; + reg = <0x7000 0x1000>; + interrupts = <0x10 0x8>; + interrupt-parent = < &ipic >; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = < &ipic >; + interrupts = <0x26 0x8>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = < &ipic >; + interrupts = <0x11 0x8>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = < &ipic >; + interrupts = <0x12 0x8>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>; + phy-connection-type = "mii"; + interrupt-parent = < &ipic >; + phy-handle = < &phy2 >; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>; + phy-connection-type = "mii"; + interrupt-parent = < &ipic >; + phy-handle = < &phy3 >; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x9 0x8>; + interrupt-parent = < &ipic >; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0xa 0x8>; + interrupt-parent = < &ipic >; + }; + + crypto@30000 { + model = "SEC3"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <0xb 0x8>; + interrupt-parent = < &ipic >; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <0x18>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sdhc@2e000 { + model = "eSDHC"; + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <0x2a 0x8>; + interrupt-parent = < &ipic >; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + }; + + pci0: pci@e0008500 { + cell-index = <0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 0x14 0x8 + 0x8800 0x0 0x0 0x2 &ipic 0x15 0x8 + 0x8800 0x0 0x0 0x3 &ipic 0x16 0x8 + 0x8800 0x0 0x0 0x4 &ipic 0x17 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 0x16 0x8 + 0x9000 0x0 0x0 0x2 &ipic 0x17 0x8 + 0x9000 0x0 0x0 0x3 &ipic 0x14 0x8 + 0x9000 0x0 0x0 0x4 &ipic 0x15 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 0x17 0x8 + 0x9800 0x0 0x0 0x2 &ipic 0x14 0x8 + 0x9800 0x0 0x0 0x3 &ipic 0x15 0x8 + 0x9800 0x0 0x0 0x4 &ipic 0x16 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 0x14 0x8 + 0xa800 0x0 0x0 0x2 &ipic 0x15 0x8 + 0xa800 0x0 0x0 0x3 &ipic 0x16 0x8 + 0xa800 0x0 0x0 0x4 &ipic 0x17 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 0x17 0x8 + 0xb000 0x0 0x0 0x2 &ipic 0x14 0x8 + 0xb000 0x0 0x0 0x3 &ipic 0x15 0x8 + 0xb000 0x0 0x0 0x4 &ipic 0x16 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 0x16 0x8 + 0xb800 0x0 0x0 0x2 &ipic 0x17 0x8 + 0xb800 0x0 0x0 0x3 &ipic 0x14 0x8 + 0xb800 0x0 0x0 0x4 &ipic 0x15 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 0x15 0x8 + 0xc000 0x0 0x0 0x2 &ipic 0x16 0x8 + 0xc000 0x0 0x0 0x3 &ipic 0x17 0x8 + 0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>; + interrupt-parent = < &ipic >; + interrupts = <0x42 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts new file mode 100644 index 0000000..fc3ba79 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -0,0 +1,293 @@ +/* + * MPC8379E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8379emds"; + compatible = "fsl,mpc8379emds","fsl,mpc837xmds"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8379@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; + i-cache-line-size = <0x20>; + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0xe 0x8>; + interrupt-parent = < &ipic >; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0xf 0x8>; + interrupt-parent = < &ipic >; + dfsrr; + }; + + spi@7000 { + compatible = "fsl_spi"; + reg = <0x7000 0x1000>; + interrupts = <0x10 0x8>; + interrupt-parent = < &ipic >; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = < &ipic >; + interrupts = <0x26 0x8>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = < &ipic >; + interrupts = <0x11 0x8>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = < &ipic >; + interrupts = <0x12 0x8>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>; + phy-connection-type = "mii"; + interrupt-parent = < &ipic >; + phy-handle = < &phy2 >; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>; + phy-connection-type = "mii"; + interrupt-parent = < &ipic >; + phy-handle = < &phy3 >; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x9 0x8>; + interrupt-parent = < &ipic >; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0xa 0x8>; + interrupt-parent = < &ipic >; + }; + + crypto@30000 { + model = "SEC3"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <0xb 0x8>; + interrupt-parent = < &ipic >; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <0x18>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sdhc@2e000 { + model = "eSDHC"; + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <0x2a 0x8>; + interrupt-parent = < &ipic >; + }; + + sata@18000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x18000 0x1000>; + interrupts = <0x2c 0x8>; + interrupt-parent = < &ipic >; + }; + + sata@19000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x19000 0x1000>; + interrupts = <0x2d 0x8>; + interrupt-parent = < &ipic >; + }; + + sata@1a000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x1a000 0x1000>; + interrupts = <0x2e 0x8>; + interrupt-parent = < &ipic >; + }; + + sata@1b000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x1b000 0x1000>; + interrupts = <0x2f 0x8>; + interrupt-parent = < &ipic >; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + }; + + pci0: pci@e0008500 { + cell-index = <0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 0x14 0x8 + 0x8800 0x0 0x0 0x2 &ipic 0x15 0x8 + 0x8800 0x0 0x0 0x3 &ipic 0x16 0x8 + 0x8800 0x0 0x0 0x4 &ipic 0x17 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 0x16 0x8 + 0x9000 0x0 0x0 0x2 &ipic 0x17 0x8 + 0x9000 0x0 0x0 0x3 &ipic 0x14 0x8 + 0x9000 0x0 0x0 0x4 &ipic 0x15 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 0x17 0x8 + 0x9800 0x0 0x0 0x2 &ipic 0x14 0x8 + 0x9800 0x0 0x0 0x3 &ipic 0x15 0x8 + 0x9800 0x0 0x0 0x4 &ipic 0x16 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 0x14 0x8 + 0xa800 0x0 0x0 0x2 &ipic 0x15 0x8 + 0xa800 0x0 0x0 0x3 &ipic 0x16 0x8 + 0xa800 0x0 0x0 0x4 &ipic 0x17 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 0x17 0x8 + 0xb000 0x0 0x0 0x2 &ipic 0x14 0x8 + 0xb000 0x0 0x0 0x3 &ipic 0x15 0x8 + 0xb000 0x0 0x0 0x4 &ipic 0x16 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 0x16 0x8 + 0xb800 0x0 0x0 0x2 &ipic 0x17 0x8 + 0xb800 0x0 0x0 0x3 &ipic 0x14 0x8 + 0xb800 0x0 0x0 0x4 &ipic 0x15 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 0x15 0x8 + 0xc000 0x0 0x0 0x2 &ipic 0x16 0x8 + 0xc000 0x0 0x0 0x3 &ipic 0x17 0x8 + 0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>; + interrupt-parent = < &ipic >; + interrupts = <0x42 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; -- cgit v0.10.2 From e10241d8a1a68955e2f3e74befd9fa6ce61ba2bc Mon Sep 17 00:00:00 2001 From: Li Yang Date: Tue, 8 Jan 2008 15:18:45 +0800 Subject: [POWERPC] 83xx: Add MPC837x USB platform support Add chip specific and board specific initialization for MPC837x USB. Signed-off-by: Li Yang Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c index cfd0548..8a9c269 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -22,6 +22,56 @@ #include "mpc83xx.h" +#define BCSR12_USB_SER_MASK 0x8a +#define BCSR12_USB_SER_PIN 0x80 +#define BCSR12_USB_SER_DEVICE 0x02 +extern int mpc837x_usb_cfg(void); + +static int mpc837xmds_usb_cfg(void) +{ + struct device_node *np; + const void *phy_type, *mode; + void __iomem *bcsr_regs = NULL; + u8 bcsr12; + int ret; + + ret = mpc837x_usb_cfg(); + if (ret) + return ret; + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start + 1); + of_node_put(np); + } + if (!bcsr_regs) + return -1; + + np = of_find_node_by_name(NULL, "usb"); + if (!np) + return -ENODEV; + phy_type = of_get_property(np, "phy_type", NULL); + if (phy_type && !strcmp(phy_type, "ulpi")) { + clrbits8(bcsr_regs + 12, BCSR12_USB_SER_PIN); + } else if (phy_type && !strcmp(phy_type, "serial")) { + mode = of_get_property(np, "dr_mode", NULL); + bcsr12 = in_8(bcsr_regs + 12) & ~BCSR12_USB_SER_MASK; + bcsr12 |= BCSR12_USB_SER_PIN; + if (mode && !strcmp(mode, "peripheral")) + bcsr12 |= BCSR12_USB_SER_DEVICE; + out_8(bcsr_regs + 12, bcsr12); + } else { + printk(KERN_ERR "USB DR: unsupported PHY\n"); + } + + of_node_put(np); + iounmap(bcsr_regs); + return 0; +} + /* ************************************************************************ * * Setup the architecture @@ -40,6 +90,7 @@ static void __init mpc837x_mds_setup_arch(void) for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") mpc83xx_add_bridge(np); #endif + mpc837xmds_usb_cfg(); } static struct of_device_id mpc837x_ids[] = { diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index b778cb4..88bb748 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -14,6 +14,7 @@ #define MPC83XX_SCCR_USB_DRCM_11 0x00300000 #define MPC83XX_SCCR_USB_DRCM_01 0x00100000 #define MPC83XX_SCCR_USB_DRCM_10 0x00200000 +#define MPC837X_SCCR_USB_DRCM_11 0x00c00000 /* system i/o configuration register low */ #define MPC83XX_SICRL_OFFS 0x114 @@ -22,6 +23,8 @@ #define MPC834X_SICRL_USB1 0x20000000 #define MPC831X_SICRL_USB_MASK 0x00000c00 #define MPC831X_SICRL_USB_ULPI 0x00000800 +#define MPC837X_SICRL_USB_MASK 0xf0000000 +#define MPC837X_SICRL_USB_ULPI 0x50000000 /* system i/o configuration register high */ #define MPC83XX_SICRH_OFFS 0x118 diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c index b45160f..b1de453 100644 --- a/arch/powerpc/platforms/83xx/usb.c +++ b/arch/powerpc/platforms/83xx/usb.c @@ -179,3 +179,43 @@ int mpc831x_usb_cfg(void) return ret; } #endif /* CONFIG_PPC_MPC831x */ + +#ifdef CONFIG_PPC_MPC837x +int mpc837x_usb_cfg(void) +{ + void __iomem *immap; + struct device_node *np = NULL; + const void *prop; + int ret = 0; + + np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr"); + if (!np) + return -ENODEV; + prop = of_get_property(np, "phy_type", NULL); + + if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) { + printk(KERN_WARNING "837x USB PHY type not supported\n"); + of_node_put(np); + return -EINVAL; + } + + /* Map IMMR space for pin and clock settings */ + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) { + of_node_put(np); + return -ENOMEM; + } + + /* Configure clock */ + clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC837X_SCCR_USB_DRCM_11, + MPC837X_SCCR_USB_DRCM_11); + + /* Configure pin mux for ULPI/serial */ + clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USB_MASK, + MPC837X_SICRL_USB_ULPI); + + iounmap(immap); + of_node_put(np); + return ret; +} +#endif /* CONFIG_PPC_MPC837x */ -- cgit v0.10.2 From 866b6ddd283ac453d4208831119d2b8272cda832 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Tue, 8 Jan 2008 15:18:46 +0800 Subject: [POWERPC] 83xx: USB device tree cleanups Remove device_type = "usb" for 83xx SoC USB controller Signed-off-by: Li Yang Signed-off-by: Kumar Gala diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 6d1d085..e58fd31 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1411,7 +1411,6 @@ platforms are moved over to use the flattened-device-tree model. Example multi port host USB controller device node : usb@22000 { - device_type = "usb"; compatible = "fsl-usb2-mph"; reg = <22000 1000>; #address-cells = <1>; @@ -1425,7 +1424,6 @@ platforms are moved over to use the flattened-device-tree model. Example dual role USB controller device node : usb@23000 { - device_type = "usb"; compatible = "fsl-usb2-dr"; reg = <23000 1000>; #address-cells = <1>; @@ -1589,7 +1587,6 @@ platforms are moved over to use the flattened-device-tree model. iii) USB (Universal Serial Bus Controller) Required properties: - - device_type : should be "usb". - compatible : could be "qe_udc" or "fhci-hcd". - mode : the could be "host" or "slave". - reg : Offset and length of the register set for the device @@ -1603,7 +1600,6 @@ platforms are moved over to use the flattened-device-tree model. Example(slave): usb@6c0 { - device_type = "usb"; compatible = "qe_udc"; reg = <6c0 40>; interrupts = <8b 0>; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index c5b6665..6e8c606 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -92,7 +92,6 @@ /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { - device_type = "usb"; compatible = "fsl-usb2-dr"; reg = <23000 1000>; #address-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 26ac467..5093ef3 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -210,7 +210,6 @@ }; usb@6c0 { - device_type = "usb"; compatible = "qe_udc"; reg = <6c0 40 8B00 100>; interrupts = ; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index e354f26..a4a9faf 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -91,7 +91,6 @@ }; usb@22000 { - device_type = "usb"; compatible = "fsl-usb2-mph"; reg = <22000 1000>; #address-cells = <1>; @@ -103,7 +102,6 @@ }; usb@23000 { - device_type = "usb"; compatible = "fsl-usb2-dr"; reg = <23000 1000>; #address-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index ebdf0b7..a06ff92 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -89,7 +89,6 @@ }; usb@23000 { - device_type = "usb"; compatible = "fsl-usb2-dr"; reg = <23000 1000>; #address-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index 0ba13eb..4120e92 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -104,7 +104,6 @@ /* phy type (ULPI or SERIAL) are only types supportted for MPH */ /* port = 0 or 1 */ usb@22000 { - device_type = "usb"; compatible = "fsl-usb2-mph"; reg = <22000 1000>; #address-cells = <1>; @@ -116,7 +115,6 @@ }; /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { - device_type = "usb"; compatible = "fsl-usb2-dr"; reg = <23000 1000>; #address-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index fd841b2..2181d2c 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -241,7 +241,6 @@ }; usb@6c0 { - device_type = "usb"; compatible = "qe_udc"; reg = <6c0 40 8B00 100>; interrupts = ; diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c index b1de453..6a454a4 100644 --- a/arch/powerpc/platforms/83xx/usb.c +++ b/arch/powerpc/platforms/83xx/usb.c @@ -41,7 +41,7 @@ int mpc834x_usb_cfg(void) sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK; sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI; - np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr"); + np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr"); if (np) { sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ @@ -67,7 +67,7 @@ int mpc834x_usb_cfg(void) port0_is_dr = 1; of_node_put(np); } - np = of_find_compatible_node(NULL, "usb", "fsl-usb2-mph"); + np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph"); if (np) { sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ @@ -111,7 +111,7 @@ int mpc831x_usb_cfg(void) const void *dr_mode; #endif - np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr"); + np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr"); if (!np) return -ENODEV; prop = of_get_property(np, "phy_type", NULL); @@ -188,7 +188,7 @@ int mpc837x_usb_cfg(void) const void *prop; int ret = 0; - np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr"); + np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr"); if (!np) return -ENODEV; prop = of_get_property(np, "phy_type", NULL); diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 217bcc2..f5c2402 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -531,14 +531,12 @@ static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type) static int __init fsl_usb_of_init(void) { struct device_node *np; - unsigned int i; + unsigned int i = 0; struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL, *usb_dev_dr_client = NULL; int ret; - for (np = NULL, i = 0; - (np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL; - i++) { + for_each_compatible_node(np, NULL, "fsl-usb2-mph") { struct resource r[2]; struct fsl_usb2_platform_data usb_data; const unsigned char *prop = NULL; @@ -581,11 +579,10 @@ static int __init fsl_usb_of_init(void) fsl_usb2_platform_data)); if (ret) goto unreg_mph; + i++; } - for (np = NULL; - (np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL; - i++) { + for_each_compatible_node(np, NULL, "fsl-usb2-dr") { struct resource r[2]; struct fsl_usb2_platform_data usb_data; const unsigned char *prop = NULL; @@ -657,6 +654,7 @@ static int __init fsl_usb_of_init(void) fsl_usb2_platform_data)))) goto unreg_dr; } + i++; } return 0; -- cgit v0.10.2 From 9b6d19dd1d87fcca43ebadfad2f50cee07fbef5e Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 4 Dec 2007 22:45:31 +0300 Subject: [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes This patch adds localbus and pata nodes to use CF IDE interface on MPC8349E-mITX boards. Patch also adds code to probe localbus. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index a4a9faf..a14399b 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -251,6 +251,21 @@ device_type = "pci"; }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8349e-localbus", + "fsl,pq2pro-localbus"; + reg = ; + ranges = <3 0 f0000000 210>; - + pata@3,0 { + compatible = "fsl,mpc8349emitx-pata", "ata-generic"; + reg = <3 0 10 3 20c 4>; + reg-shift = <1>; + pio-mode = <6>; + interrupts = <17 8>; + interrupt-parent = <&ipic>; + }; + }; }; diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig index 6feb86e..2fbe4e5 100644 --- a/arch/powerpc/configs/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/mpc834x_itx_defconfig @@ -570,7 +570,8 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index aa76819..50e8f63 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -37,6 +38,17 @@ #include "mpc83xx.h" +static struct of_device_id __initdata mpc834x_itx_ids[] = { + { .compatible = "fsl,pq2pro-localbus", }, + {}, +}; + +static int __init mpc834x_itx_declare_of_platform_devices(void) +{ + return of_platform_bus_probe(NULL, mpc834x_itx_ids, NULL); +} +machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices); + /* ************************************************************************ * * Setup the architecture -- cgit v0.10.2 From a79d8e93d300adb84cccc38ac396cfb118c238ad Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Fri, 7 Dec 2007 01:51:22 +0300 Subject: phy/fixed.c: rework to not duplicate PHY layer functionality With that patch fixed.c now fully emulates MDIO bus, thus no need to duplicate PHY layer functionality. That, in turn, drastically simplifies the code, and drops down line count. As an additional bonus, now there is no need to register MDIO bus for each PHY, all emulated PHYs placed on the platform fixed MDIO bus. There is also no more need to pre-allocate PHYs via .config option, this is all now handled dynamically. Signed-off-by: Anton Vorontsov Signed-off-by: Vitaly Bordug Acked-by: Jeff Garzik Signed-off-by: Kumar Gala diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 54b2ba9..7fe03ce 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -61,34 +61,12 @@ config ICPLUS_PHY Currently supports the IP175C PHY. config FIXED_PHY - tristate "Drivers for PHY emulation on fixed speed/link" + bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" ---help--- - Adds the driver to PHY layer to cover the boards that do not have any PHY bound, - but with the ability to manipulate the speed/link in software. The relevant MII - speed/duplex parameters could be effectively handled in a user-specified function. - Currently tested with mpc866ads. - -config FIXED_MII_10_FDX - bool "Emulation for 10M Fdx fixed PHY behavior" - depends on FIXED_PHY - -config FIXED_MII_100_FDX - bool "Emulation for 100M Fdx fixed PHY behavior" - depends on FIXED_PHY - -config FIXED_MII_1000_FDX - bool "Emulation for 1000M Fdx fixed PHY behavior" - depends on FIXED_PHY - -config FIXED_MII_AMNT - int "Number of emulated PHYs to allocate " - depends on FIXED_PHY - default "1" - ---help--- - Sometimes it is required to have several independent emulated - PHYs on the bus (in case of multi-eth but phy-less HW for instance). - This control will have specified number allocated for each fixed - PHY type enabled. + Adds the platform "fixed" MDIO Bus to cover the boards that use + PHYs that are not connected to the real MDIO bus. + + Currently tested with mpc866ads and mpc8349e-mitx. config MDIO_BITBANG tristate "Support for bitbanged MDIO buses" diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c index 5619182..73b6d39 100644 --- a/drivers/net/phy/fixed.c +++ b/drivers/net/phy/fixed.c @@ -1,362 +1,253 @@ /* - * drivers/net/phy/fixed.c + * Fixed MDIO bus (MDIO bus emulation with fixed PHYs) * - * Driver for fixed PHYs, when transceiver is able to operate in one fixed mode. + * Author: Vitaly Bordug + * Anton Vorontsov * - * Author: Vitaly Bordug - * - * Copyright (c) 2006 MontaVista Software, Inc. + * Copyright (c) 2006-2007 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * */ + #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include #include +#include +#include #include -#include #include #include -#include -#include -#include +#define MII_REGS_NUM 29 -/* we need to track the allocated pointers in order to free them on exit */ -static struct fixed_info *fixed_phy_ptrs[CONFIG_FIXED_MII_AMNT*MAX_PHY_AMNT]; - -/*----------------------------------------------------------------------------- - * If something weird is required to be done with link/speed, - * network driver is able to assign a function to implement this. - * May be useful for PHY's that need to be software-driven. - *-----------------------------------------------------------------------------*/ -int fixed_mdio_set_link_update(struct phy_device *phydev, - int (*link_update) (struct net_device *, - struct fixed_phy_status *)) -{ - struct fixed_info *fixed; - - if (link_update == NULL) - return -EINVAL; - - if (phydev) { - if (phydev->bus) { - fixed = phydev->bus->priv; - fixed->link_update = link_update; - return 0; - } - } - return -EINVAL; -} - -EXPORT_SYMBOL(fixed_mdio_set_link_update); +struct fixed_mdio_bus { + int irqs[PHY_MAX_ADDR]; + struct mii_bus mii_bus; + struct list_head phys; +}; -struct fixed_info *fixed_mdio_get_phydev (int phydev_ind) -{ - if (phydev_ind >= MAX_PHY_AMNT) - return NULL; - return fixed_phy_ptrs[phydev_ind]; -} +struct fixed_phy { + int id; + u16 regs[MII_REGS_NUM]; + struct phy_device *phydev; + struct fixed_phy_status status; + int (*link_update)(struct net_device *, struct fixed_phy_status *); + struct list_head node; +}; -EXPORT_SYMBOL(fixed_mdio_get_phydev); +static struct platform_device *pdev; +static struct fixed_mdio_bus platform_fmb = { + .phys = LIST_HEAD_INIT(platform_fmb.phys), +}; -/*----------------------------------------------------------------------------- - * This is used for updating internal mii regs from the status - *-----------------------------------------------------------------------------*/ -#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) || defined(CONFIG_FIXED_MII_1000_FDX) -static int fixed_mdio_update_regs(struct fixed_info *fixed) +static int fixed_phy_update_regs(struct fixed_phy *fp) { - u16 *regs = fixed->regs; - u16 bmsr = 0; + u16 bmsr = BMSR_ANEGCAPABLE; u16 bmcr = 0; + u16 lpagb = 0; + u16 lpa = 0; - if (!regs) { - printk(KERN_ERR "%s: regs not set up", __FUNCTION__); - return -EINVAL; - } - - if (fixed->phy_status.link) - bmsr |= BMSR_LSTATUS; - - if (fixed->phy_status.duplex) { + if (fp->status.duplex) { bmcr |= BMCR_FULLDPLX; - switch (fixed->phy_status.speed) { + switch (fp->status.speed) { + case 1000: + bmsr |= BMSR_ESTATEN; + bmcr |= BMCR_SPEED1000; + lpagb |= LPA_1000FULL; + break; case 100: bmsr |= BMSR_100FULL; bmcr |= BMCR_SPEED100; + lpa |= LPA_100FULL; break; - case 10: bmsr |= BMSR_10FULL; + lpa |= LPA_10FULL; break; + default: + printk(KERN_WARNING "fixed phy: unknown speed\n"); + return -EINVAL; } } else { - switch (fixed->phy_status.speed) { + switch (fp->status.speed) { + case 1000: + bmsr |= BMSR_ESTATEN; + bmcr |= BMCR_SPEED1000; + lpagb |= LPA_1000HALF; + break; case 100: bmsr |= BMSR_100HALF; bmcr |= BMCR_SPEED100; + lpa |= LPA_100HALF; break; - case 10: - bmsr |= BMSR_100HALF; + bmsr |= BMSR_10HALF; + lpa |= LPA_10HALF; break; + default: + printk(KERN_WARNING "fixed phy: unknown speed\n"); + return -EINVAL; } } - regs[MII_BMCR] = bmcr; - regs[MII_BMSR] = bmsr | 0x800; /*we are always capable of 10 hdx */ + if (fp->status.link) + bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE; + + if (fp->status.pause) + lpa |= LPA_PAUSE_CAP; + + if (fp->status.asym_pause) + lpa |= LPA_PAUSE_ASYM; + + fp->regs[MII_PHYSID1] = fp->id >> 16; + fp->regs[MII_PHYSID2] = fp->id; + + fp->regs[MII_BMSR] = bmsr; + fp->regs[MII_BMCR] = bmcr; + fp->regs[MII_LPA] = lpa; + fp->regs[MII_STAT1000] = lpagb; return 0; } -static int fixed_mii_read(struct mii_bus *bus, int phy_id, int location) +static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num) { - struct fixed_info *fixed = bus->priv; - - /* if user has registered link update callback, use it */ - if (fixed->phydev) - if (fixed->phydev->attached_dev) { - if (fixed->link_update) { - fixed->link_update(fixed->phydev->attached_dev, - &fixed->phy_status); - fixed_mdio_update_regs(fixed); + struct fixed_mdio_bus *fmb = container_of(bus, struct fixed_mdio_bus, + mii_bus); + struct fixed_phy *fp; + + if (reg_num >= MII_REGS_NUM) + return -1; + + list_for_each_entry(fp, &fmb->phys, node) { + if (fp->id == phy_id) { + /* Issue callback if user registered it. */ + if (fp->link_update) { + fp->link_update(fp->phydev->attached_dev, + &fp->status); + fixed_phy_update_regs(fp); } + return fp->regs[reg_num]; } + } - if ((unsigned int)location >= fixed->regs_num) - return -1; - return fixed->regs[location]; + return 0xFFFF; } -static int fixed_mii_write(struct mii_bus *bus, int phy_id, int location, - u16 val) +static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num, + u16 val) { - /* do nothing for now */ return 0; } -static int fixed_mii_reset(struct mii_bus *bus) +/* + * If something weird is required to be done with link/speed, + * network driver is able to assign a function to implement this. + * May be useful for PHY's that need to be software-driven. + */ +int fixed_phy_set_link_update(struct phy_device *phydev, + int (*link_update)(struct net_device *, + struct fixed_phy_status *)) { - /*nothing here - no way/need to reset it */ - return 0; -} -#endif + struct fixed_mdio_bus *fmb = &platform_fmb; + struct fixed_phy *fp; -static int fixed_config_aneg(struct phy_device *phydev) -{ - /* :TODO:03/13/2006 09:45:37 PM:: - The full autoneg funcionality can be emulated, - but no need to have anything here for now - */ - return 0; -} + if (!link_update || !phydev || !phydev->bus) + return -EINVAL; -/*----------------------------------------------------------------------------- - * the manual bind will do the magic - with phy_id_mask == 0 - * match will never return true... - *-----------------------------------------------------------------------------*/ -static struct phy_driver fixed_mdio_driver = { - .name = "Fixed PHY", -#ifdef CONFIG_FIXED_MII_1000_FDX - .features = PHY_GBIT_FEATURES, -#else - .features = PHY_BASIC_FEATURES, -#endif - .config_aneg = fixed_config_aneg, - .read_status = genphy_read_status, - .driver = { .owner = THIS_MODULE, }, -}; + list_for_each_entry(fp, &fmb->phys, node) { + if (fp->id == phydev->phy_id) { + fp->link_update = link_update; + fp->phydev = phydev; + return 0; + } + } -static void fixed_mdio_release(struct device *dev) -{ - struct phy_device *phydev = container_of(dev, struct phy_device, dev); - struct mii_bus *bus = phydev->bus; - struct fixed_info *fixed = bus->priv; - - kfree(phydev); - kfree(bus->dev); - kfree(bus); - kfree(fixed->regs); - kfree(fixed); + return -ENOENT; } +EXPORT_SYMBOL_GPL(fixed_phy_set_link_update); -/*----------------------------------------------------------------------------- - * This func is used to create all the necessary stuff, bind - * the fixed phy driver and register all it on the mdio_bus_type. - * speed is either 10 or 100 or 1000, duplex is boolean. - * number is used to create multiple fixed PHYs, so that several devices can - * utilize them simultaneously. - * - * The device on mdio bus will look like [bus_id]:[phy_id], - * bus_id = number - * phy_id = speed+duplex. - *-----------------------------------------------------------------------------*/ -#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) || defined(CONFIG_FIXED_MII_1000_FDX) -struct fixed_info *fixed_mdio_register_device( - int bus_id, int speed, int duplex, u8 phy_id) +int fixed_phy_add(unsigned int irq, int phy_id, + struct fixed_phy_status *status) { - struct mii_bus *new_bus; - struct fixed_info *fixed; - struct phy_device *phydev; - int err; + int ret; + struct fixed_mdio_bus *fmb = &platform_fmb; + struct fixed_phy *fp; - struct device *dev = kzalloc(sizeof(struct device), GFP_KERNEL); + fp = kzalloc(sizeof(*fp), GFP_KERNEL); + if (!fp) + return -ENOMEM; - if (dev == NULL) - goto err_dev_alloc; + memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM); - new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); + fmb->irqs[phy_id] = irq; - if (new_bus == NULL) - goto err_bus_alloc; + fp->id = phy_id; + fp->status = *status; - fixed = kzalloc(sizeof(struct fixed_info), GFP_KERNEL); + ret = fixed_phy_update_regs(fp); + if (ret) + goto err_regs; - if (fixed == NULL) - goto err_fixed_alloc; + list_add_tail(&fp->node, &fmb->phys); - fixed->regs = kzalloc(MII_REGS_NUM * sizeof(int), GFP_KERNEL); - if (NULL == fixed->regs) - goto err_fixed_regs_alloc; + return 0; - fixed->regs_num = MII_REGS_NUM; - fixed->phy_status.speed = speed; - fixed->phy_status.duplex = duplex; - fixed->phy_status.link = 1; +err_regs: + kfree(fp); + return ret; +} +EXPORT_SYMBOL_GPL(fixed_phy_add); - new_bus->name = "Fixed MII Bus"; - new_bus->read = &fixed_mii_read; - new_bus->write = &fixed_mii_write; - new_bus->reset = &fixed_mii_reset; - /*set up workspace */ - fixed_mdio_update_regs(fixed); - new_bus->priv = fixed; +static int __init fixed_mdio_bus_init(void) +{ + struct fixed_mdio_bus *fmb = &platform_fmb; + int ret; - new_bus->dev = dev; - dev_set_drvdata(dev, new_bus); + pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0); + if (!pdev) { + ret = -ENOMEM; + goto err_pdev; + } - /* create phy_device and register it on the mdio bus */ - phydev = phy_device_create(new_bus, 0, 0); - if (phydev == NULL) - goto err_phy_dev_create; + fmb->mii_bus.id = 0; + fmb->mii_bus.name = "Fixed MDIO Bus"; + fmb->mii_bus.dev = &pdev->dev; + fmb->mii_bus.read = &fixed_mdio_read; + fmb->mii_bus.write = &fixed_mdio_write; + fmb->mii_bus.irq = fmb->irqs; - /* - * Put the phydev pointer into the fixed pack so that bus read/write - * code could be able to access for instance attached netdev. Well it - * doesn't have to do so, only in case of utilizing user-specified - * link-update... - */ + ret = mdiobus_register(&fmb->mii_bus); + if (ret) + goto err_mdiobus_reg; - fixed->phydev = phydev; - phydev->speed = speed; - phydev->duplex = duplex; + return 0; - phydev->irq = PHY_IGNORE_INTERRUPT; - phydev->dev.bus = &mdio_bus_type; +err_mdiobus_reg: + platform_device_unregister(pdev); +err_pdev: + return ret; +} +module_init(fixed_mdio_bus_init); - snprintf(phydev->dev.bus_id, BUS_ID_SIZE, - PHY_ID_FMT, bus_id, phy_id); +static void __exit fixed_mdio_bus_exit(void) +{ + struct fixed_mdio_bus *fmb = &platform_fmb; + struct fixed_phy *fp; - phydev->bus = new_bus; + mdiobus_unregister(&fmb->mii_bus); + platform_device_unregister(pdev); - phydev->dev.driver = &fixed_mdio_driver.driver; - phydev->dev.release = fixed_mdio_release; - err = phydev->dev.driver->probe(&phydev->dev); - if (err < 0) { - printk(KERN_ERR "Phy %s: problems with fixed driver\n", - phydev->dev.bus_id); - goto err_out; - } - err = device_register(&phydev->dev); - if (err) { - printk(KERN_ERR "Phy %s failed to register\n", - phydev->dev.bus_id); - goto err_out; + list_for_each_entry(fp, &fmb->phys, node) { + list_del(&fp->node); + kfree(fp); } - //phydev->state = PHY_RUNNING; /* make phy go up quick, but in 10Mbit/HDX - return fixed; - -err_out: - kfree(phydev); -err_phy_dev_create: - kfree(fixed->regs); -err_fixed_regs_alloc: - kfree(fixed); -err_fixed_alloc: - kfree(new_bus); -err_bus_alloc: - kfree(dev); -err_dev_alloc: - - return NULL; - } -#endif +module_exit(fixed_mdio_bus_exit); -MODULE_DESCRIPTION("Fixed PHY device & driver for PAL"); +MODULE_DESCRIPTION("Fixed MDIO bus (MDIO bus emulation with fixed PHYs)"); MODULE_AUTHOR("Vitaly Bordug"); MODULE_LICENSE("GPL"); - -static int __init fixed_init(void) -{ - int cnt = 0; - int i; -/* register on the bus... Not expected to be matched - * with anything there... - * - */ - phy_driver_register(&fixed_mdio_driver); - -/* We will create several mdio devices here, and will bound the upper - * driver to them. - * - * Then the external software can lookup the phy bus by searching - * for 0:101, to be connected to the virtual 100M Fdx phy. - * - * In case several virtual PHYs required, the bus_id will be in form - * [num]:[duplex]+[speed], which make it able even to define - * driver-specific link control callback, if for instance PHY is - * completely SW-driven. - */ - for (i=1; i <= CONFIG_FIXED_MII_AMNT; i++) { -#ifdef CONFIG_FIXED_MII_1000_FDX - fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(0, 1000, 1, i); -#endif -#ifdef CONFIG_FIXED_MII_100_FDX - fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(1, 100, 1, i); -#endif -#ifdef CONFIG_FIXED_MII_10_FDX - fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(2, 10, 1, i); -#endif - } - - return 0; -} - -static void __exit fixed_exit(void) -{ - int i; - - phy_driver_unregister(&fixed_mdio_driver); - for (i=0; i < MAX_PHY_AMNT; i++) - if ( fixed_phy_ptrs[i] ) - device_unregister(&fixed_phy_ptrs[i]->phydev->dev); -} - -module_init(fixed_init); -module_exit(fixed_exit); diff --git a/include/linux/phy_fixed.h b/include/linux/phy_fixed.h index 04ba70d..509d8f5 100644 --- a/include/linux/phy_fixed.h +++ b/include/linux/phy_fixed.h @@ -1,38 +1,31 @@ #ifndef __PHY_FIXED_H #define __PHY_FIXED_H -#define MII_REGS_NUM 29 - -/* max number of virtual phy stuff */ -#define MAX_PHY_AMNT 10 -/* - The idea is to emulate normal phy behavior by responding with - pre-defined values to mii BMCR read, so that read_status hook could - take all the needed info. -*/ - struct fixed_phy_status { - u8 link; - u16 speed; - u8 duplex; + int link; + int speed; + int duplex; + int pause; + int asym_pause; }; -/*----------------------------------------------------------------------------- - * Private information hoder for mii_bus - *-----------------------------------------------------------------------------*/ -struct fixed_info { - u16 *regs; - u8 regs_num; - struct fixed_phy_status phy_status; - struct phy_device *phydev; /* pointer to the container */ - /* link & speed cb */ - int (*link_update) (struct net_device *, struct fixed_phy_status *); +#ifdef CONFIG_FIXED_PHY +extern int fixed_phy_add(unsigned int irq, int phy_id, + struct fixed_phy_status *status); +#else +static inline int fixed_phy_add(unsigned int irq, int phy_id, + struct fixed_phy_status *status) +{ + return -ENODEV; +} +#endif /* CONFIG_FIXED_PHY */ -}; - - -int fixed_mdio_set_link_update(struct phy_device *, - int (*link_update) (struct net_device *, struct fixed_phy_status *)); -struct fixed_info *fixed_mdio_get_phydev (int phydev_ind); +/* + * This function issued only by fixed_phy-aware drivers, no need + * protect it with #ifdef + */ +extern int fixed_phy_set_link_update(struct phy_device *phydev, + int (*link_update)(struct net_device *, + struct fixed_phy_status *)); #endif /* __PHY_FIXED_H */ -- cgit v0.10.2 From e30007656463228ba23748df81a786f74dabf8b4 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Fri, 7 Dec 2007 01:51:39 +0300 Subject: [POWERPC] MPC8349E-mITX: Vitesse 7385 PHY is not connected to the MDIO bus ...thus use fixed-link to register proper "Fixed PHY" Signed-off-by: Anton Vorontsov Signed-off-by: Vitaly Bordug Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index a14399b..04b8da4 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -125,14 +125,6 @@ reg = <1c>; device_type = "ethernet-phy"; }; - - /* Vitesse 7385 */ - phy1f: ethernet-phy@1f { - interrupt-parent = < &ipic >; - interrupts = <12 8>; - reg = <1f>; - device_type = "ethernet-phy"; - }; }; enet0: ethernet@24000 { @@ -157,7 +149,8 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 8 24 8 25 8>; interrupt-parent = < &ipic >; - phy-handle = < &phy1f >; + /* Vitesse 7385 isn't on the MDIO bus */ + fixed-link = <1 1 d#1000 0 0>; linux,network-index = <1>; }; -- cgit v0.10.2 From a21e282a124f4679c040087ab73aa5b147d4275f Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Fri, 7 Dec 2007 01:51:31 +0300 Subject: [POWERPC] fsl_soc: add support to gianfar for fixed-link property fixed-link says: register new "Fixed/emulated PHY", i.e. PHY that not connected to the real MDIO bus. Signed-off-by: Vitaly Bordug Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index e58fd31..f920c24 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1257,6 +1257,10 @@ platforms are moved over to use the flattened-device-tree model. services interrupts for this device. - phy-handle : The phandle for the PHY connected to this ethernet controller. + - fixed-link : where a is emulated phy id - choose any, + but unique to the all specified fixed-links, b is duplex - 0 half, + 1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no + pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause. Recommended properties: diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index f5c2402..474cb8e 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -130,6 +131,37 @@ u32 get_baudrate(void) EXPORT_SYMBOL(get_baudrate); #endif /* CONFIG_CPM2 */ +#ifdef CONFIG_FIXED_PHY +static int __init of_add_fixed_phys(void) +{ + int ret; + struct device_node *np; + u32 *fixed_link; + struct fixed_phy_status status = {}; + + for_each_node_by_name(np, "ethernet") { + fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL); + if (!fixed_link) + continue; + + status.link = 1; + status.duplex = fixed_link[1]; + status.speed = fixed_link[2]; + status.pause = fixed_link[3]; + status.asym_pause = fixed_link[4]; + + ret = fixed_phy_add(PHY_POLL, fixed_link[0], &status); + if (ret) { + of_node_put(np); + return ret; + } + } + + return 0; +} +arch_initcall(of_add_fixed_phys); +#endif /* CONFIG_FIXED_PHY */ + static int __init gfar_mdio_of_init(void) { struct device_node *np = NULL; @@ -198,7 +230,6 @@ static const char *gfar_tx_intr = "tx"; static const char *gfar_rx_intr = "rx"; static const char *gfar_err_intr = "error"; - static int __init gfar_of_init(void) { struct device_node *np; @@ -282,29 +313,43 @@ static int __init gfar_of_init(void) gfar_data.interface = PHY_INTERFACE_MODE_MII; ph = of_get_property(np, "phy-handle", NULL); - phy = of_find_node_by_phandle(*ph); + if (ph == NULL) { + u32 *fixed_link; - if (phy == NULL) { - ret = -ENODEV; - goto unreg; - } + fixed_link = (u32 *)of_get_property(np, "fixed-link", + NULL); + if (!fixed_link) { + ret = -ENODEV; + goto unreg; + } - mdio = of_get_parent(phy); + gfar_data.bus_id = 0; + gfar_data.phy_id = fixed_link[0]; + } else { + phy = of_find_node_by_phandle(*ph); + + if (phy == NULL) { + ret = -ENODEV; + goto unreg; + } + + mdio = of_get_parent(phy); + + id = of_get_property(phy, "reg", NULL); + ret = of_address_to_resource(mdio, 0, &res); + if (ret) { + of_node_put(phy); + of_node_put(mdio); + goto unreg; + } + + gfar_data.phy_id = *id; + gfar_data.bus_id = res.start; - id = of_get_property(phy, "reg", NULL); - ret = of_address_to_resource(mdio, 0, &res); - if (ret) { of_node_put(phy); of_node_put(mdio); - goto unreg; } - gfar_data.phy_id = *id; - gfar_data.bus_id = res.start; - - of_node_put(phy); - of_node_put(mdio); - ret = platform_device_add_data(gfar_dev, &gfar_data, sizeof(struct -- cgit v0.10.2 From bc556ba940085e46e0ab1b5ed7c31428dc86dd03 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 8 Jan 2008 10:30:58 -0600 Subject: [POWERPC] QE: Add ability to upload QE firmware Define the layout of a binary blob that contains a QE firmware and instructions on how to upload it. Add function qe_upload_firmware() to parse the blob and perform the actual upload. Fully define 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. Added description of a new QE firmware node to booting-without-of.txt. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX index 94a3c57..3be84aa 100644 --- a/Documentation/powerpc/00-INDEX +++ b/Documentation/powerpc/00-INDEX @@ -28,3 +28,6 @@ sound.txt - info on sound support under Linux/PPC zImage_layout.txt - info on the kernel images for Linux/PPC +qe_firmware.txt + - describes the layout of firmware binaries for the Freescale QUICC + Engine and the code that parses and uploads the microcode therein. diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index f920c24..e8c67c9 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -52,7 +52,10 @@ Table of Contents i) Freescale QUICC Engine module (QE) j) CFI or JEDEC memory-mapped NOR flash k) Global Utilities Block - l) Xilinx IP cores + l) Freescale Communications Processor Module + m) Chipselect/Local Bus + n) 4xx/Axon EMAC ethernet nodes + o) Xilinx IP cores VII - Specifying interrupt information for devices 1) interrupts property @@ -1788,6 +1791,32 @@ platforms are moved over to use the flattened-device-tree model. }; }; + viii) Uploaded QE firmware + + If a new firwmare has been uploaded to the QE (usually by the + boot loader), then a 'firmware' child node should be added to the QE + node. This node provides information on the uploaded firmware that + device drivers may need. + + Required properties: + - id: The string name of the firmware. This is taken from the 'id' + member of the qe_firmware structure of the uploaded firmware. + Device drivers can search this string to determine if the + firmware they want is already present. + - extended-modes: The Extended Modes bitfield, taken from the + firmware binary. It is a 64-bit number represented + as an array of two 32-bit numbers. + - virtual-traps: The virtual traps, taken from the firmware binary. + It is an array of 8 32-bit numbers. + + Example: + + firmware { + id = "Soft-UART"; + extended-modes = <0 0>; + virtual-traps = <0 0 0 0 0 0 0 0>; + } + j) CFI or JEDEC memory-mapped NOR flash Flash chips (Memory Technology Devices) are often used for solid state @@ -2269,7 +2298,7 @@ platforms are moved over to use the flattened-device-tree model. available. For Axon: 0x0000012a - l) Xilinx IP cores + o) Xilinx IP cores The Xilinx EDK toolchain ships with a set of IP cores (devices) for use in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.txt new file mode 100644 index 0000000..8962664 --- /dev/null +++ b/Documentation/powerpc/qe_firmware.txt @@ -0,0 +1,295 @@ + Freescale QUICC Engine Firmware Uploading + ----------------------------------------- + +(c) 2007 Timur Tabi , + Freescale Semiconductor + +Table of Contents +================= + + I - Software License for Firmware + + II - Microcode Availability + + III - Description and Terminology + + IV - Microcode Programming Details + + V - Firmware Structure Layout + + VI - Sample Code for Creating Firmware Files + +Revision Information +==================== + +November 30, 2007: Rev 1.0 - Initial version + +I - Software License for Firmware +================================= + +Each firmware file comes with its own software license. For information on +the particular license, please see the license text that is distributed with +the firmware. + +II - Microcode Availability +=========================== + +Firmware files are distributed through various channels. Some are available on +http://opensource.freescale.com. For other firmware files, please contact +your Freescale representative or your operating system vendor. + +III - Description and Terminology +================================ + +In this document, the term 'microcode' refers to the sequence of 32-bit +integers that compose the actual QE microcode. + +The term 'firmware' refers to a binary blob that contains the microcode as +well as other data that + + 1) describes the microcode's purpose + 2) describes how and where to upload the microcode + 3) specifies the values of various registers + 4) includes additional data for use by specific device drivers + +Firmware files are binary files that contain only a firmware. + +IV - Microcode Programming Details +=================================== + +The QE architecture allows for only one microcode present in I-RAM for each +RISC processor. To replace any current microcode, a full QE reset (which +disables the microcode) must be performed first. + +QE microcode is uploaded using the following procedure: + +1) The microcode is placed into I-RAM at a specific location, using the + IRAM.IADD and IRAM.IDATA registers. + +2) The CERCR.CIR bit is set to 0 or 1, depending on whether the firmware + needs split I-RAM. Split I-RAM is only meaningful for SOCs that have + QEs with multiple RISC processors, such as the 8360. Splitting the I-RAM + allows each processor to run a different microcode, effectively creating an + asymmetric multiprocessing (AMP) system. + +3) The TIBCR trap registers are loaded with the addresses of the trap handlers + in the microcode. + +4) The RSP.ECCR register is programmed with the value provided. + +5) If necessary, device drivers that need the virtual traps and extended mode + data will use them. + +Virtual Microcode Traps + +These virtual traps are conditional branches in the microcode. These are +"soft" provisional introduced in the ROMcode in order to enable higher +flexibility and save h/w traps If new features are activated or an issue is +being fixed in the RAM package utilizing they should be activated. This data +structure signals the microcode which of these virtual traps is active. + +This structure contains 6 words that the application should copy to some +specific been defined. This table describes the structure. + + --------------------------------------------------------------- + | Offset in | | Destination Offset | Size of | + | array | Protocol | within PRAM | Operand | + --------------------------------------------------------------| + | 0 | Ethernet | 0xF8 | 4 bytes | + | | interworking | | | + --------------------------------------------------------------- + | 4 | ATM | 0xF8 | 4 bytes | + | | interworking | | | + --------------------------------------------------------------- + | 8 | PPP | 0xF8 | 4 bytes | + | | interworking | | | + --------------------------------------------------------------- + | 12 | Ethernet RX | 0x22 | 1 byte | + | | Distributor Page | | | + --------------------------------------------------------------- + | 16 | ATM Globtal | 0x28 | 1 byte | + | | Params Table | | | + --------------------------------------------------------------- + | 20 | Insert Frame | 0xF8 | 4 bytes | + --------------------------------------------------------------- + + +Extended Modes + +This is a double word bit array (64 bits) that defines special functionality +which has an impact on the softwarew drivers. Each bit has its own impact +and has special instructions for the s/w associated with it. This structure is +described in this table: + + ----------------------------------------------------------------------- + | Bit # | Name | Description | + ----------------------------------------------------------------------- + | 0 | General | Indicates that prior to each host command | + | | push command | given by the application, the software must | + | | | assert a special host command (push command)| + | | | CECDR = 0x00800000. | + | | | CECR = 0x01c1000f. | + ----------------------------------------------------------------------- + | 1 | UCC ATM | Indicates that after issuing ATM RX INIT | + | | RX INIT | command, the host must issue another special| + | | push command | command (push command) and immediately | + | | | following that re-issue the ATM RX INIT | + | | | command. (This makes the sequence of | + | | | initializing the ATM receiver a sequence of | + | | | three host commands) | + | | | CECDR = 0x00800000. | + | | | CECR = 0x01c1000f. | + ----------------------------------------------------------------------- + | 2 | Add/remove | Indicates that following the specific host | + | | command | command: "Add/Remove entry in Hash Lookup | + | | validation | Table" used in Interworking setup, the user | + | | | must issue another command. | + | | | CECDR = 0xce000003. | + | | | CECR = 0x01c10f58. | + ----------------------------------------------------------------------- + | 3 | General push | Indicates that the s/w has to initialize | + | | command | some pointers in the Ethernet thread pages | + | | | which are used when Header Compression is | + | | | activated. The full details of these | + | | | pointers is located in the software drivers.| + ----------------------------------------------------------------------- + | 4 | General push | Indicates that after issuing Ethernet TX | + | | command | INIT command, user must issue this command | + | | | for each SNUM of Ethernet TX thread. | + | | | CECDR = 0x00800003. | + | | | CECR = 0x7'b{0}, 8'b{Enet TX thread SNUM}, | + | | | 1'b{1}, 12'b{0}, 4'b{1} | + ----------------------------------------------------------------------- + | 5 - 31 | N/A | Reserved, set to zero. | + ----------------------------------------------------------------------- + +V - Firmware Structure Layout +============================== + +QE microcode from Freescale is typically provided as a header file. This +header file contains macros that define the microcode binary itself as well as +some other data used in uploading that microcode. The format of these files +do not lend themselves to simple inclusion into other code. Hence, +the need for a more portable format. This section defines that format. + +Instead of distributing a header file, the microcode and related data are +embedded into a binary blob. This blob is passed to the qe_upload_firmware() +function, which parses the blob and performs everything necessary to upload +the microcode. + +All integers are big-endian. See the comments for function +qe_upload_firmware() for up-to-date implementation information. + +This structure supports versioning, where the version of the structure is +embedded into the structure itself. To ensure forward and backwards +compatibility, all versions of the structure must use the same 'qe_header' +structure at the beginning. + +'header' (type: struct qe_header): + The 'length' field is the size, in bytes, of the entire structure, + including all the microcode embedded in it, as well as the CRC (if + present). + + The 'magic' field is an array of three bytes that contains the letters + 'Q', 'E', and 'F'. This is an identifier that indicates that this + structure is a QE Firmware structure. + + The 'version' field is a single byte that indicates the version of this + structure. If the layout of the structure should ever need to be + changed to add support for additional types of microcode, then the + version number should also be changed. + +The 'id' field is a null-terminated string(suitable for printing) that +identifies the firmware. + +The 'count' field indicates the number of 'microcode' structures. There +must be one and only one 'microcode' structure for each RISC processor. +Therefore, this field also represents the number of RISC processors for this +SOC. + +The 'soc' structure contains the SOC numbers and revisions used to match +the microcode to the SOC itself. Normally, the microcode loader should +check the data in this structure with the SOC number and revisions, and +only upload the microcode if there's a match. However, this check is not +made on all platforms. + +Although it is not recommended, you can specify '0' in the soc.model +field to skip matching SOCs altogether. + +The 'model' field is a 16-bit number that matches the actual SOC. The +'major' and 'minor' fields are the major and minor revision numbrs, +respectively, of the SOC. + +For example, to match the 8323, revision 1.0: + soc.model = 8323 + soc.major = 1 + soc.minor = 0 + +'padding' is neccessary for structure alignment. This field ensures that the +'extended_modes' field is aligned on a 64-bit boundary. + +'extended_modes' is a bitfield that defines special functionality which has an +impact on the device drivers. Each bit has its own impact and has special +instructions for the driver associated with it. This field is stored in +the QE library and available to any driver that calles qe_get_firmware_info(). + +'vtraps' is an array of 8 words that contain virtual trap values for each +virtual traps. As with 'extended_modes', this field is stored in the QE +library and available to any driver that calles qe_get_firmware_info(). + +'microcode' (type: struct qe_microcode): + For each RISC processor there is one 'microcode' structure. The first + 'microcode' structure is for the first RISC, and so on. + + The 'id' field is a null-terminated string suitable for printing that + identifies this particular microcode. + + 'traps' is an array of 16 words that contain hardware trap values + for each of the 16 traps. If trap[i] is 0, then this particular + trap is to be ignored (i.e. not written to TIBCR[i]). The entire value + is written as-is to the TIBCR[i] register, so be sure to set the EN + and T_IBP bits if necessary. + + 'eccr' is the value to program into the ECCR register. + + 'iram_offset' is the offset into IRAM to start writing the + microcode. + + 'count' is the number of 32-bit words in the microcode. + + 'code_offset' is the offset, in bytes, from the beginning of this + structure where the microcode itself can be found. The first + microcode binary should be located immediately after the 'microcode' + array. + + 'major', 'minor', and 'revision' are the major, minor, and revision + version numbers, respectively, of the microcode. If all values are 0, + then these fields are ignored. + + 'reserved' is necessary for structure alignment. Since 'microcode' + is an array, the 64-bit 'extended_modes' field needs to be aligned + on a 64-bit boundary, and this can only happen if the size of + 'microcode' is a multiple of 8 bytes. To ensure that, we add + 'reserved'. + +After the last microcode is a 32-bit CRC. It can be calculated using +this algorithm: + +u32 crc32(const u8 *p, unsigned int len) +{ + unsigned int i; + u32 crc = 0; + + while (len--) { + crc ^= *p++; + for (i = 0; i < 8; i++) + crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0); + } + return crc; +} + +VI - Sample Code for Creating Firmware Files +============================================ + +A Python program that creates firmware binaries from the header files normally +distributed by Freescale can be found on http://opensource.freescale.com. diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index ea22cad..18f101b 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -265,6 +265,7 @@ config TAU_AVERAGE config QUICC_ENGINE bool select PPC_LIB_RHEAP + select CRC32 help The QUICC Engine (QE) is a new generation of communications coprocessors on Freescale embedded CPUs (akin to CPM in older chips). diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 21e0106..3925eae 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -394,3 +395,249 @@ void *qe_muram_addr(unsigned long offset) return (void *)&qe_immr->muram[offset]; } EXPORT_SYMBOL(qe_muram_addr); + +/* The maximum number of RISCs we support */ +#define MAX_QE_RISC 2 + +/* Firmware information stored here for qe_get_firmware_info() */ +static struct qe_firmware_info qe_firmware_info; + +/* + * Set to 1 if QE firmware has been uploaded, and therefore + * qe_firmware_info contains valid data. + */ +static int qe_firmware_uploaded; + +/* + * Upload a QE microcode + * + * This function is a worker function for qe_upload_firmware(). It does + * the actual uploading of the microcode. + */ +static void qe_upload_microcode(const void *base, + const struct qe_microcode *ucode) +{ + const __be32 *code = base + be32_to_cpu(ucode->code_offset); + unsigned int i; + + if (ucode->major || ucode->minor || ucode->revision) + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s' version %u.%u.%u\n", + ucode->id, ucode->major, ucode->minor, ucode->revision); + else + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s'\n", ucode->id); + + /* Use auto-increment */ + out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) | + QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR); + + for (i = 0; i < be32_to_cpu(ucode->count); i++) + out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i])); +} + +/* + * Upload a microcode to the I-RAM at a specific address. + * + * See Documentation/powerpc/qe-firmware.txt for information on QE microcode + * uploading. + * + * Currently, only version 1 is supported, so the 'version' field must be + * set to 1. + * + * The SOC model and revision are not validated, they are only displayed for + * informational purposes. + * + * 'calc_size' is the calculated size, in bytes, of the firmware structure and + * all of the microcode structures, minus the CRC. + * + * 'length' is the size that the structure says it is, including the CRC. + */ +int qe_upload_firmware(const struct qe_firmware *firmware) +{ + unsigned int i; + unsigned int j; + u32 crc; + size_t calc_size = sizeof(struct qe_firmware); + size_t length; + const struct qe_header *hdr; + + if (!firmware) { + printk(KERN_ERR "qe-firmware: invalid pointer\n"); + return -EINVAL; + } + + hdr = &firmware->header; + length = be32_to_cpu(hdr->length); + + /* Check the magic */ + if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || + (hdr->magic[2] != 'F')) { + printk(KERN_ERR "qe-firmware: not a microcode\n"); + return -EPERM; + } + + /* Check the version */ + if (hdr->version != 1) { + printk(KERN_ERR "qe-firmware: unsupported version\n"); + return -EPERM; + } + + /* Validate some of the fields */ + if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) { + printk(KERN_ERR "qe-firmware: invalid data\n"); + return -EINVAL; + } + + /* Validate the length and check if there's a CRC */ + calc_size += (firmware->count - 1) * sizeof(struct qe_microcode); + + for (i = 0; i < firmware->count; i++) + /* + * For situations where the second RISC uses the same microcode + * as the first, the 'code_offset' and 'count' fields will be + * zero, so it's okay to add those. + */ + calc_size += sizeof(__be32) * + be32_to_cpu(firmware->microcode[i].count); + + /* Validate the length */ + if (length != calc_size + sizeof(__be32)) { + printk(KERN_ERR "qe-firmware: invalid length\n"); + return -EPERM; + } + + /* Validate the CRC */ + crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size)); + if (crc != crc32(0, firmware, calc_size)) { + printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n"); + return -EIO; + } + + /* + * If the microcode calls for it, split the I-RAM. + */ + if (!firmware->split) + setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR); + + if (firmware->soc.model) + printk(KERN_INFO + "qe-firmware: firmware '%s' for %u V%u.%u\n", + firmware->id, be16_to_cpu(firmware->soc.model), + firmware->soc.major, firmware->soc.minor); + else + printk(KERN_INFO "qe-firmware: firmware '%s'\n", + firmware->id); + + /* + * The QE only supports one microcode per RISC, so clear out all the + * saved microcode information and put in the new. + */ + memset(&qe_firmware_info, 0, sizeof(qe_firmware_info)); + strcpy(qe_firmware_info.id, firmware->id); + qe_firmware_info.extended_modes = firmware->extended_modes; + memcpy(qe_firmware_info.vtraps, firmware->vtraps, + sizeof(firmware->vtraps)); + + /* Loop through each microcode. */ + for (i = 0; i < firmware->count; i++) { + const struct qe_microcode *ucode = &firmware->microcode[i]; + + /* Upload a microcode if it's present */ + if (ucode->code_offset) + qe_upload_microcode(firmware, ucode); + + /* Program the traps for this processor */ + for (j = 0; j < 16; j++) { + u32 trap = be32_to_cpu(ucode->traps[j]); + + if (trap) + out_be32(&qe_immr->rsp[i].tibcr[j], trap); + } + + /* Enable traps */ + out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr)); + } + + qe_firmware_uploaded = 1; + + return 0; +} +EXPORT_SYMBOL(qe_upload_firmware); + +/* + * Get info on the currently-loaded firmware + * + * This function also checks the device tree to see if the boot loader has + * uploaded a firmware already. + */ +struct qe_firmware_info *qe_get_firmware_info(void) +{ + static int initialized; + struct property *prop; + struct device_node *qe; + struct device_node *fw = NULL; + const char *sprop; + unsigned int i; + + /* + * If we haven't checked yet, and a driver hasn't uploaded a firmware + * yet, then check the device tree for information. + */ + if (initialized || qe_firmware_uploaded) + return NULL; + + initialized = 1; + + /* + * Newer device trees have an "fsl,qe" compatible property for the QE + * node, but we still need to support older device trees. + */ + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return NULL; + } + + /* Find the 'firmware' child node */ + for_each_child_of_node(qe, fw) { + if (strcmp(fw->name, "firmware") == 0) + break; + } + + of_node_put(qe); + + /* Did we find the 'firmware' node? */ + if (!fw) + return NULL; + + qe_firmware_uploaded = 1; + + /* Copy the data into qe_firmware_info*/ + sprop = of_get_property(fw, "id", NULL); + if (sprop) + strncpy(qe_firmware_info.id, sprop, + sizeof(qe_firmware_info.id) - 1); + + prop = of_find_property(fw, "extended-modes", NULL); + if (prop && (prop->length == sizeof(u64))) { + const u64 *iprop = prop->value; + + qe_firmware_info.extended_modes = *iprop; + } + + prop = of_find_property(fw, "virtual-traps", NULL); + if (prop && (prop->length == 32)) { + const u32 *iprop = prop->value; + + for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++) + qe_firmware_info.vtraps[i] = iprop[i]; + } + + of_node_put(fw); + + return &qe_firmware_info; +} +EXPORT_SYMBOL(qe_get_firmware_info); + diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h index aba9806..82a4526 100644 --- a/include/asm-powerpc/immap_qe.h +++ b/include/asm-powerpc/immap_qe.h @@ -393,9 +393,39 @@ struct dbg { u8 res2[0x48]; } __attribute__ ((packed)); -/* RISC Special Registers (Trap and Breakpoint) */ +/* + * RISC Special Registers (Trap and Breakpoint). These are described in + * the QE Developer's Handbook. + */ struct rsp { - u32 reg[0x40]; /* 64 32-bit registers */ + __be32 tibcr[16]; /* Trap/instruction breakpoint control regs */ + u8 res0[64]; + __be32 ibcr0; + __be32 ibs0; + __be32 ibcnr0; + u8 res1[4]; + __be32 ibcr1; + __be32 ibs1; + __be32 ibcnr1; + __be32 npcr; + __be32 dbcr; + __be32 dbar; + __be32 dbamr; + __be32 dbsr; + __be32 dbcnr; + u8 res2[12]; + __be32 dbdr_h; + __be32 dbdr_l; + __be32 dbdmr_h; + __be32 dbdmr_l; + __be32 bsr; + __be32 bor; + __be32 bior; + u8 res3[4]; + __be32 iatr[4]; + __be32 eccr; /* Exception control configuration register */ + __be32 eicr; + u8 res4[0x100-0xf8]; } __attribute__ ((packed)); struct qe_immap { diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h index a24b7b1..430dc77 100644 --- a/include/asm-powerpc/qe.h +++ b/include/asm-powerpc/qe.h @@ -94,6 +94,58 @@ unsigned long qe_muram_alloc_fixed(unsigned long offset, int size); void qe_muram_dump(void); void *qe_muram_addr(unsigned long offset); +/* Structure that defines QE firmware binary files. + * + * See Documentation/powerpc/qe-firmware.txt for a description of these + * fields. + */ +struct qe_firmware { + struct qe_header { + __be32 length; /* Length of the entire structure, in bytes */ + u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */ + u8 version; /* Version of this layout. First ver is '1' */ + } header; + u8 id[62]; /* Null-terminated identifier string */ + u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */ + u8 count; /* Number of microcode[] structures */ + struct { + __be16 model; /* The SOC model */ + u8 major; /* The SOC revision major */ + u8 minor; /* The SOC revision minor */ + } __attribute__ ((packed)) soc; + u8 padding[4]; /* Reserved, for alignment */ + __be64 extended_modes; /* Extended modes */ + __be32 vtraps[8]; /* Virtual trap addresses */ + u8 reserved[4]; /* Reserved, for future expansion */ + struct qe_microcode { + u8 id[32]; /* Null-terminated identifier */ + __be32 traps[16]; /* Trap addresses, 0 == ignore */ + __be32 eccr; /* The value for the ECCR register */ + __be32 iram_offset; /* Offset into I-RAM for the code */ + __be32 count; /* Number of 32-bit words of the code */ + __be32 code_offset; /* Offset of the actual microcode */ + u8 major; /* The microcode version major */ + u8 minor; /* The microcode version minor */ + u8 revision; /* The microcode version revision */ + u8 padding; /* Reserved, for alignment */ + u8 reserved[4]; /* Reserved, for future expansion */ + } __attribute__ ((packed)) microcode[1]; + /* All microcode binaries should be located here */ + /* CRC32 should be located here, after the microcode binaries */ +} __attribute__ ((packed)); + +struct qe_firmware_info { + char id[64]; /* Firmware name */ + u32 vtraps[8]; /* Virtual trap addresses */ + u64 extended_modes; /* Extended modes */ +}; + +/* Upload a firmware to the QE */ +int qe_upload_firmware(const struct qe_firmware *firmware); + +/* Obtain information on the uploaded firmware */ +struct qe_firmware_info *qe_get_firmware_info(void); + /* Buffer descriptors */ struct qe_bd { __be16 status; @@ -329,6 +381,15 @@ enum comm_dir { #define QE_SDEBCR_BA_MASK 0x01FFFFFF +/* Communication Processor */ +#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */ +#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */ +#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */ + +/* I-RAM */ +#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */ +#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */ + /* UPC */ #define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ #define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ -- cgit v0.10.2 From 845cf505cebd159b57b3ae3b25e9ad0eb036f9ab Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 9 Jan 2008 17:35:05 -0600 Subject: [POWERPC] QE: Add support for Freescale QUICCEngine UART Add support for UART serial ports using a Freescale QUICCEngine. Update booting-without-of.txt to define new properties for a QE UART node. Update the MPC8323E-MDS device tree to add UCC5 as a UART. Update the QE library to support slow UCC devices and modules. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index e8c67c9..a13d457 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1619,7 +1619,7 @@ platforms are moved over to use the flattened-device-tree model. Required properties: - device_type : should be "network", "hldc", "uart", "transparent" - "bisync" or "atm". + "bisync", "atm", or "serial". - compatible : could be "ucc_geth" or "fsl_atm" and so on. - model : should be "UCC". - device-id : the ucc number(1-8), corresponding to UCCx in UM. @@ -1632,6 +1632,13 @@ platforms are moved over to use the flattened-device-tree model. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - pio-handle : The phandle for the Parallel I/O port configuration. + - port-number : for UART drivers, the port number to use, between 0 and 3. + This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0. + The port number is added to the minor number of the device. Unlike the + CPM UART driver, the port-number is required for the QE UART driver. + - soft-uart : for UART drivers, if specified this means the QE UART device + driver should use "Soft-UART" mode, which is needed on some SOCs that have + broken UART hardware. Soft-UART is provided via a microcode upload. - rx-clock-name: the UCC receive clock source "none": clock source is disabled "brg1" through "brg16": clock source is BRG1-BRG16, respectively diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 5093ef3..6902524 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -7,6 +7,18 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + + * To enable external serial I/O on a Freescale MPC 8323 SYS/MDS board, do + * this: + * + * 1) On chip U61, lift (disconnect) pins 21 (TXD) and 22 (RXD) from the board. + * 2) Solder a wire from U61-21 to P19A-23. P19 is a grid of pins on the board + * next to the serial ports. + * 3) Solder a wire from U61-22 to P19K-22. + * + * Note that there's a typo in the schematic. The board labels the last column + * of pins "P19K", but in the schematic, that column is called "P19J". So if + * you're going by the schematic, the pin is called "P19J-K22". */ / { @@ -169,6 +181,23 @@ 1 1e 1 0 1 0 /* TX_EN */ 1 1f 2 0 1 0>;/* CRS */ }; + pio5: ucc_pin@05 { + pio-map = < + /* + * open has + * port pin dir drain sel irq + */ + 2 0 1 0 2 0 /* TxD5 */ + 2 8 2 0 2 0 /* RxD5 */ + + 2 1d 2 0 0 0 /* CTS5 */ + 2 1f 1 0 2 0 /* RTS5 */ + + 2 18 2 0 0 0 /* CD */ + + >; + }; + }; }; @@ -176,6 +205,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "qe"; + compatible = "fsl,qe"; model = "QE"; ranges = <0 e0100000 00100000>; reg = ; @@ -249,6 +279,26 @@ pio-handle = < &pio4 >; }; + ucc@2400 { + device_type = "serial"; + compatible = "ucc_uart"; + model = "UCC"; + device-id = <5>; /* The UCC number, 1-7*/ + port-number = <0>; /* Which ttyQEx device */ + soft-uart; /* We need Soft-UART */ + reg = <2400 200>; + interrupts = <28>; /* From Table 18-12 */ + interrupt-parent = < &qeic >; + /* + * For Soft-UART, we need to set TX to 1X, which + * means specifying separate clock sources. + */ + rx-clock-name = "brg5"; + tx-clock-name = "brg6"; + pio-handle = < &pio5 >; + }; + + mdio@2320 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig index f611d34..adc6621 100644 --- a/arch/powerpc/sysdev/qe_lib/Kconfig +++ b/arch/powerpc/sysdev/qe_lib/Kconfig @@ -4,7 +4,7 @@ config UCC_SLOW bool - default n + default y if SERIAL_QE help This option provides qe_lib support to UCC slow protocols: UART, BISYNC, QMC diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 0174b3a..b2870b2 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -41,6 +42,7 @@ u32 ucc_slow_get_qe_cr_subblock(int uccs_num) default: return QE_CR_SUBBLOCK_INVALID; } } +EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock); void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs) { @@ -56,6 +58,7 @@ void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs) qe_issue_cmd(QE_GRACEFUL_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); } +EXPORT_SYMBOL(ucc_slow_graceful_stop_tx); void ucc_slow_stop_tx(struct ucc_slow_private * uccs) { @@ -65,6 +68,7 @@ void ucc_slow_stop_tx(struct ucc_slow_private * uccs) id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); } +EXPORT_SYMBOL(ucc_slow_stop_tx); void ucc_slow_restart_tx(struct ucc_slow_private * uccs) { @@ -74,6 +78,7 @@ void ucc_slow_restart_tx(struct ucc_slow_private * uccs) id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); } +EXPORT_SYMBOL(ucc_slow_restart_tx); void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode) { @@ -94,6 +99,7 @@ void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode) } out_be32(&us_regs->gumr_l, gumr_l); } +EXPORT_SYMBOL(ucc_slow_enable); void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode) { @@ -114,6 +120,7 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode) } out_be32(&us_regs->gumr_l, gumr_l); } +EXPORT_SYMBOL(ucc_slow_disable); /* Initialize the UCC for Slow operations * @@ -347,6 +354,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc *uccs_ret = uccs; return 0; } +EXPORT_SYMBOL(ucc_slow_init); void ucc_slow_free(struct ucc_slow_private * uccs) { @@ -366,5 +374,5 @@ void ucc_slow_free(struct ucc_slow_private * uccs) kfree(uccs); } - +EXPORT_SYMBOL(ucc_slow_free); -- cgit v0.10.2 From d7584ed2b994a572326650b0c4d2c25961e6f49d Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 15 Jan 2008 09:56:13 -0600 Subject: [POWERPC] qe-uart: add support for Freescale QUICCEngine UART Add file ucc_uart.c, a serial device driver for the Freescale QUICCEngine. Update the Kconfig and Makefile accordingly. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index d7e1996..d962b74 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1284,4 +1284,14 @@ config SERIAL_OF_PLATFORM Currently, only 8250 compatible ports are supported, but others can easily be added. +config SERIAL_QE + tristate "Freescale QUICC Engine serial port support" + depends on QUICC_ENGINE + select SERIAL_CORE + select FW_LOADER + default n + help + This driver supports the QE serial ports on Freescale embedded + PowerPC that contain a QUICC Engine. + endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index af6377d..7eb4553 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -64,3 +64,4 @@ obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o +obj-$(CONFIG_SERIAL_QE) += ucc_uart.o diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c new file mode 100644 index 0000000..e0994f0 --- /dev/null +++ b/drivers/serial/ucc_uart.c @@ -0,0 +1,1514 @@ +/* + * Freescale QUICC Engine UART device driver + * + * Author: Timur Tabi + * + * Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * This driver adds support for UART devices via Freescale's QUICC Engine + * found on some Freescale SOCs. + * + * If Soft-UART support is needed but not already present, then this driver + * will request and upload the "Soft-UART" microcode upon probe. The + * filename of the microcode should be fsl_qe_ucode_uart_X_YZ.bin, where "X" + * is the name of the SOC (e.g. 8323), and YZ is the revision of the SOC, + * (e.g. "11" for 1.1). + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +/* + * The GUMR flag for Soft UART. This would normally be defined in qe.h, + * but Soft-UART is a hack and we want to keep everything related to it in + * this file. + */ +#define UCC_SLOW_GUMR_H_SUART 0x00004000 /* Soft-UART */ + +/* + * soft_uart is 1 if we need to use Soft-UART mode + */ +static int soft_uart; +/* + * firmware_loaded is 1 if the firmware has been loaded, 0 otherwise. + */ +static int firmware_loaded; + +/* Enable this macro to configure all serial ports in internal loopback + mode */ +/* #define LOOPBACK */ + +/* The major and minor device numbers are defined in + * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE + * UART, we have major number 204 and minor numbers 46 - 49, which are the + * same as for the CPM2. This decision was made because no Freescale part + * has both a CPM and a QE. + */ +#define SERIAL_QE_MAJOR 204 +#define SERIAL_QE_MINOR 46 + +/* Since we only have minor numbers 46 - 49, there is a hard limit of 4 ports */ +#define UCC_MAX_UART 4 + +/* The number of buffer descriptors for receiving characters. */ +#define RX_NUM_FIFO 4 + +/* The number of buffer descriptors for transmitting characters. */ +#define TX_NUM_FIFO 4 + +/* The maximum size of the character buffer for a single RX BD. */ +#define RX_BUF_SIZE 32 + +/* The maximum size of the character buffer for a single TX BD. */ +#define TX_BUF_SIZE 32 + +/* + * The number of jiffies to wait after receiving a close command before the + * device is actually closed. This allows the last few characters to be + * sent over the wire. + */ +#define UCC_WAIT_CLOSING 100 + +struct ucc_uart_pram { + struct ucc_slow_pram common; + u8 res1[8]; /* reserved */ + __be16 maxidl; /* Maximum idle chars */ + __be16 idlc; /* temp idle counter */ + __be16 brkcr; /* Break count register */ + __be16 parec; /* receive parity error counter */ + __be16 frmec; /* receive framing error counter */ + __be16 nosec; /* receive noise counter */ + __be16 brkec; /* receive break condition counter */ + __be16 brkln; /* last received break length */ + __be16 uaddr[2]; /* UART address character 1 & 2 */ + __be16 rtemp; /* Temp storage */ + __be16 toseq; /* Transmit out of sequence char */ + __be16 cchars[8]; /* control characters 1-8 */ + __be16 rccm; /* receive control character mask */ + __be16 rccr; /* receive control character register */ + __be16 rlbc; /* receive last break character */ + __be16 res2; /* reserved */ + __be32 res3; /* reserved, should be cleared */ + u8 res4; /* reserved, should be cleared */ + u8 res5[3]; /* reserved, should be cleared */ + __be32 res6; /* reserved, should be cleared */ + __be32 res7; /* reserved, should be cleared */ + __be32 res8; /* reserved, should be cleared */ + __be32 res9; /* reserved, should be cleared */ + __be32 res10; /* reserved, should be cleared */ + __be32 res11; /* reserved, should be cleared */ + __be32 res12; /* reserved, should be cleared */ + __be32 res13; /* reserved, should be cleared */ +/* The rest is for Soft-UART only */ + __be16 supsmr; /* 0x90, Shadow UPSMR */ + __be16 res92; /* 0x92, reserved, initialize to 0 */ + __be32 rx_state; /* 0x94, RX state, initialize to 0 */ + __be32 rx_cnt; /* 0x98, RX count, initialize to 0 */ + u8 rx_length; /* 0x9C, Char length, set to 1+CL+PEN+1+SL */ + u8 rx_bitmark; /* 0x9D, reserved, initialize to 0 */ + u8 rx_temp_dlst_qe; /* 0x9E, reserved, initialize to 0 */ + u8 res14[0xBC - 0x9F]; /* reserved */ + __be32 dump_ptr; /* 0xBC, Dump pointer */ + __be32 rx_frame_rem; /* 0xC0, reserved, initialize to 0 */ + u8 rx_frame_rem_size; /* 0xC4, reserved, initialize to 0 */ + u8 tx_mode; /* 0xC5, mode, 0=AHDLC, 1=UART */ + __be16 tx_state; /* 0xC6, TX state */ + u8 res15[0xD0 - 0xC8]; /* reserved */ + __be32 resD0; /* 0xD0, reserved, initialize to 0 */ + u8 resD4; /* 0xD4, reserved, initialize to 0 */ + __be16 resD5; /* 0xD5, reserved, initialize to 0 */ +} __attribute__ ((packed)); + +/* SUPSMR definitions, for Soft-UART only */ +#define UCC_UART_SUPSMR_SL 0x8000 +#define UCC_UART_SUPSMR_RPM_MASK 0x6000 +#define UCC_UART_SUPSMR_RPM_ODD 0x0000 +#define UCC_UART_SUPSMR_RPM_LOW 0x2000 +#define UCC_UART_SUPSMR_RPM_EVEN 0x4000 +#define UCC_UART_SUPSMR_RPM_HIGH 0x6000 +#define UCC_UART_SUPSMR_PEN 0x1000 +#define UCC_UART_SUPSMR_TPM_MASK 0x0C00 +#define UCC_UART_SUPSMR_TPM_ODD 0x0000 +#define UCC_UART_SUPSMR_TPM_LOW 0x0400 +#define UCC_UART_SUPSMR_TPM_EVEN 0x0800 +#define UCC_UART_SUPSMR_TPM_HIGH 0x0C00 +#define UCC_UART_SUPSMR_FRZ 0x0100 +#define UCC_UART_SUPSMR_UM_MASK 0x00c0 +#define UCC_UART_SUPSMR_UM_NORMAL 0x0000 +#define UCC_UART_SUPSMR_UM_MAN_MULTI 0x0040 +#define UCC_UART_SUPSMR_UM_AUTO_MULTI 0x00c0 +#define UCC_UART_SUPSMR_CL_MASK 0x0030 +#define UCC_UART_SUPSMR_CL_8 0x0030 +#define UCC_UART_SUPSMR_CL_7 0x0020 +#define UCC_UART_SUPSMR_CL_6 0x0010 +#define UCC_UART_SUPSMR_CL_5 0x0000 + +#define UCC_UART_TX_STATE_AHDLC 0x00 +#define UCC_UART_TX_STATE_UART 0x01 +#define UCC_UART_TX_STATE_X1 0x00 +#define UCC_UART_TX_STATE_X16 0x80 + +#define UCC_UART_PRAM_ALIGNMENT 0x100 + +#define UCC_UART_SIZE_OF_BD UCC_SLOW_SIZE_OF_BD +#define NUM_CONTROL_CHARS 8 + +/* Private per-port data structure */ +struct uart_qe_port { + struct uart_port port; + struct ucc_slow __iomem *uccp; + struct ucc_uart_pram __iomem *uccup; + struct ucc_slow_info us_info; + struct ucc_slow_private *us_private; + struct device_node *np; + unsigned int ucc_num; /* First ucc is 0, not 1 */ + + u16 rx_nrfifos; + u16 rx_fifosize; + u16 tx_nrfifos; + u16 tx_fifosize; + int wait_closing; + u32 flags; + struct qe_bd *rx_bd_base; + struct qe_bd *rx_cur; + struct qe_bd *tx_bd_base; + struct qe_bd *tx_cur; + unsigned char *tx_buf; + unsigned char *rx_buf; + void *bd_virt; /* virtual address of the BD buffers */ + dma_addr_t bd_dma_addr; /* bus address of the BD buffers */ + unsigned int bd_size; /* size of BD buffer space */ +}; + +static struct uart_driver ucc_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyQE", + .major = SERIAL_QE_MAJOR, + .minor = SERIAL_QE_MINOR, + .nr = UCC_MAX_UART, +}; + +/* + * Virtual to physical address translation. + * + * Given the virtual address for a character buffer, this function returns + * the physical (DMA) equivalent. + */ +static inline dma_addr_t cpu2qe_addr(void *addr, struct uart_qe_port *qe_port) +{ + if (likely((addr >= qe_port->bd_virt)) && + (addr < (qe_port->bd_virt + qe_port->bd_size))) + return qe_port->bd_dma_addr + (addr - qe_port->bd_virt); + + /* something nasty happened */ + printk(KERN_ERR "%s: addr=%p\n", __FUNCTION__, addr); + BUG(); + return 0; +} + +/* + * Physical to virtual address translation. + * + * Given the physical (DMA) address for a character buffer, this function + * returns the virtual equivalent. + */ +static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port) +{ + /* sanity check */ + if (likely((addr >= qe_port->bd_dma_addr) && + (addr < (qe_port->bd_dma_addr + qe_port->bd_size)))) + return qe_port->bd_virt + (addr - qe_port->bd_dma_addr); + + /* something nasty happened */ + printk(KERN_ERR "%s: addr=%x\n", __FUNCTION__, addr); + BUG(); + return NULL; +} + +/* + * Return 1 if the QE is done transmitting all buffers for this port + * + * This function scans each BD in sequence. If we find a BD that is not + * ready (READY=1), then we return 0 indicating that the QE is still sending + * data. If we reach the last BD (WRAP=1), then we know we've scanned + * the entire list, and all BDs are done. + */ +static unsigned int qe_uart_tx_empty(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct qe_bd *bdp = qe_port->tx_bd_base; + + while (1) { + if (in_be16(&bdp->status) & BD_SC_READY) + /* This BD is not done, so return "not done" */ + return 0; + + if (in_be16(&bdp->status) & BD_SC_WRAP) + /* + * This BD is done and it's the last one, so return + * "done" + */ + return 1; + + bdp++; + }; +} + +/* + * Set the modem control lines + * + * Although the QE can control the modem control lines (e.g. CTS), we + * don't need that support. This function must exist, however, otherwise + * the kernel will panic. + */ +void qe_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/* + * Get the current modem control line status + * + * Although the QE can control the modem control lines (e.g. CTS), this + * driver currently doesn't support that, so we always return Carrier + * Detect, Data Set Ready, and Clear To Send. + */ +static unsigned int qe_uart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/* + * Disable the transmit interrupt. + * + * Although this function is called "stop_tx", it does not actually stop + * transmission of data. Instead, it tells the QE to not generate an + * interrupt when the UCC is finished sending characters. + */ +static void qe_uart_stop_tx(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX); +} + +/* + * Transmit as many characters to the HW as possible. + * + * This function will attempt to stuff of all the characters from the + * kernel's transmit buffer into TX BDs. + * + * A return value of non-zero indicates that it sucessfully stuffed all + * characters from the kernel buffer. + * + * A return value of zero indicates that there are still characters in the + * kernel's buffer that have not been transmitted, but there are no more BDs + * available. This function should be called again after a BD has been made + * available. + */ +static int qe_uart_tx_pump(struct uart_qe_port *qe_port) +{ + struct qe_bd *bdp; + unsigned char *p; + unsigned int count; + struct uart_port *port = &qe_port->port; + struct circ_buf *xmit = &port->info->xmit; + + bdp = qe_port->rx_cur; + + /* Handle xon/xoff */ + if (port->x_char) { + /* Pick next descriptor and fill from buffer */ + bdp = qe_port->tx_cur; + + p = qe2cpu_addr(bdp->buf, qe_port); + + *p++ = port->x_char; + out_be16(&bdp->length, 1); + setbits16(&bdp->status, BD_SC_READY); + /* Get next BD. */ + if (in_be16(&bdp->status) & BD_SC_WRAP) + bdp = qe_port->tx_bd_base; + else + bdp++; + qe_port->tx_cur = bdp; + + port->icount.tx++; + port->x_char = 0; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + qe_uart_stop_tx(port); + return 0; + } + + /* Pick next descriptor and fill from buffer */ + bdp = qe_port->tx_cur; + + while (!(in_be16(&bdp->status) & BD_SC_READY) && + (xmit->tail != xmit->head)) { + count = 0; + p = qe2cpu_addr(bdp->buf, qe_port); + while (count < qe_port->tx_fifosize) { + *p++ = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + count++; + if (xmit->head == xmit->tail) + break; + } + + out_be16(&bdp->length, count); + setbits16(&bdp->status, BD_SC_READY); + + /* Get next BD. */ + if (in_be16(&bdp->status) & BD_SC_WRAP) + bdp = qe_port->tx_bd_base; + else + bdp++; + } + qe_port->tx_cur = bdp; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) { + /* The kernel buffer is empty, so turn off TX interrupts. We + don't need to be told when the QE is finished transmitting + the data. */ + qe_uart_stop_tx(port); + return 0; + } + + return 1; +} + +/* + * Start transmitting data + * + * This function will start transmitting any available data, if the port + * isn't already transmitting data. + */ +static void qe_uart_start_tx(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + /* If we currently are transmitting, then just return */ + if (in_be16(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX) + return; + + /* Otherwise, pump the port and start transmission */ + if (qe_uart_tx_pump(qe_port)) + setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX); +} + +/* + * Stop transmitting data + */ +static void qe_uart_stop_rx(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX); +} + +/* + * Enable status change interrupts + * + * We don't support status change interrupts, but we need to define this + * function otherwise the kernel will panic. + */ +static void qe_uart_enable_ms(struct uart_port *port) +{ +} + +/* Start or stop sending break signal + * + * This function controls the sending of a break signal. If break_state=1, + * then we start sending a break signal. If break_state=0, then we stop + * sending the break signal. + */ +static void qe_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + if (break_state) + ucc_slow_stop_tx(qe_port->us_private); + else + ucc_slow_restart_tx(qe_port->us_private); +} + +/* ISR helper function for receiving character. + * + * This function is called by the ISR to handling receiving characters + */ +static void qe_uart_int_rx(struct uart_qe_port *qe_port) +{ + int i; + unsigned char ch, *cp; + struct uart_port *port = &qe_port->port; + struct tty_struct *tty = port->info->tty; + struct qe_bd *bdp; + u16 status; + unsigned int flg; + + /* Just loop through the closed BDs and copy the characters into + * the buffer. + */ + bdp = qe_port->rx_cur; + while (1) { + status = in_be16(&bdp->status); + + /* If this one is empty, then we assume we've read them all */ + if (status & BD_SC_EMPTY) + break; + + /* get number of characters, and check space in RX buffer */ + i = in_be16(&bdp->length); + + /* If we don't have enough room in RX buffer for the entire BD, + * then we try later, which will be the next RX interrupt. + */ + if (tty_buffer_request_room(tty, i) < i) { + dev_dbg(port->dev, "ucc-uart: no room in RX buffer\n"); + return; + } + + /* get pointer */ + cp = qe2cpu_addr(bdp->buf, qe_port); + + /* loop through the buffer */ + while (i-- > 0) { + ch = *cp++; + port->icount.rx++; + flg = TTY_NORMAL; + + if (!i && status & + (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) + goto handle_error; + if (uart_handle_sysrq_char(port, ch)) + continue; + +error_return: + tty_insert_flip_char(tty, ch, flg); + + } + + /* This BD is ready to be used again. Clear status. get next */ + clrsetbits_be16(&bdp->status, BD_SC_BR | BD_SC_FR | BD_SC_PR | + BD_SC_OV | BD_SC_ID, BD_SC_EMPTY); + if (in_be16(&bdp->status) & BD_SC_WRAP) + bdp = qe_port->rx_bd_base; + else + bdp++; + + } + + /* Write back buffer pointer */ + qe_port->rx_cur = bdp; + + /* Activate BH processing */ + tty_flip_buffer_push(tty); + + return; + + /* Error processing */ + +handle_error: + /* Statistics */ + if (status & BD_SC_BR) + port->icount.brk++; + if (status & BD_SC_PR) + port->icount.parity++; + if (status & BD_SC_FR) + port->icount.frame++; + if (status & BD_SC_OV) + port->icount.overrun++; + + /* Mask out ignored conditions */ + status &= port->read_status_mask; + + /* Handle the remaining ones */ + if (status & BD_SC_BR) + flg = TTY_BREAK; + else if (status & BD_SC_PR) + flg = TTY_PARITY; + else if (status & BD_SC_FR) + flg = TTY_FRAME; + + /* Overrun does not affect the current character ! */ + if (status & BD_SC_OV) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); +#ifdef SUPPORT_SYSRQ + port->sysrq = 0; +#endif + goto error_return; +} + +/* Interrupt handler + * + * This interrupt handler is called after a BD is processed. + */ +static irqreturn_t qe_uart_int(int irq, void *data) +{ + struct uart_qe_port *qe_port = (struct uart_qe_port *) data; + struct ucc_slow __iomem *uccp = qe_port->uccp; + u16 events; + + /* Clear the interrupts */ + events = in_be16(&uccp->ucce); + out_be16(&uccp->ucce, events); + + if (events & UCC_UART_UCCE_BRKE) + uart_handle_break(&qe_port->port); + + if (events & UCC_UART_UCCE_RX) + qe_uart_int_rx(qe_port); + + if (events & UCC_UART_UCCE_TX) + qe_uart_tx_pump(qe_port); + + return events ? IRQ_HANDLED : IRQ_NONE; +} + +/* Initialize buffer descriptors + * + * This function initializes all of the RX and TX buffer descriptors. + */ +static void qe_uart_initbd(struct uart_qe_port *qe_port) +{ + int i; + void *bd_virt; + struct qe_bd *bdp; + + /* Set the physical address of the host memory buffers in the buffer + * descriptors, and the virtual address for us to work with. + */ + bd_virt = qe_port->bd_virt; + bdp = qe_port->rx_bd_base; + qe_port->rx_cur = qe_port->rx_bd_base; + for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) { + out_be16(&bdp->status, BD_SC_EMPTY | BD_SC_INTRPT); + out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); + out_be16(&bdp->length, 0); + bd_virt += qe_port->rx_fifosize; + bdp++; + } + + /* */ + out_be16(&bdp->status, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT); + out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); + out_be16(&bdp->length, 0); + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + bd_virt = qe_port->bd_virt + + L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize); + qe_port->tx_cur = qe_port->tx_bd_base; + bdp = qe_port->tx_bd_base; + for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) { + out_be16(&bdp->status, BD_SC_INTRPT); + out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); + out_be16(&bdp->length, 0); + bd_virt += qe_port->tx_fifosize; + bdp++; + } + + /* Loopback requires the preamble bit to be set on the first TX BD */ +#ifdef LOOPBACK + setbits16(&qe_port->tx_cur->status, BD_SC_P); +#endif + + out_be16(&bdp->status, BD_SC_WRAP | BD_SC_INTRPT); + out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); + out_be16(&bdp->length, 0); +} + +/* + * Initialize a UCC for UART. + * + * This function configures a given UCC to be used as a UART device. Basic + * UCC initialization is handled in qe_uart_request_port(). This function + * does all the UART-specific stuff. + */ +static void qe_uart_init_ucc(struct uart_qe_port *qe_port) +{ + u32 cecr_subblock; + struct ucc_slow __iomem *uccp = qe_port->uccp; + struct ucc_uart_pram *uccup = qe_port->uccup; + + unsigned int i; + + /* First, disable TX and RX in the UCC */ + ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX); + + /* Program the UCC UART parameter RAM */ + out_8(&uccup->common.rbmr, UCC_BMR_GBL | UCC_BMR_BO_BE); + out_8(&uccup->common.tbmr, UCC_BMR_GBL | UCC_BMR_BO_BE); + out_be16(&uccup->common.mrblr, qe_port->rx_fifosize); + out_be16(&uccup->maxidl, 0x10); + out_be16(&uccup->brkcr, 1); + out_be16(&uccup->parec, 0); + out_be16(&uccup->frmec, 0); + out_be16(&uccup->nosec, 0); + out_be16(&uccup->brkec, 0); + out_be16(&uccup->uaddr[0], 0); + out_be16(&uccup->uaddr[1], 0); + out_be16(&uccup->toseq, 0); + for (i = 0; i < 8; i++) + out_be16(&uccup->cchars[i], 0xC000); + out_be16(&uccup->rccm, 0xc0ff); + + /* Configure the GUMR registers for UART */ + if (soft_uart) + /* Soft-UART requires a 1X multiplier for TX */ + clrsetbits_be32(&uccp->gumr_l, + UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | + UCC_SLOW_GUMR_L_RDCR_MASK, + UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 | + UCC_SLOW_GUMR_L_RDCR_16); + else + clrsetbits_be32(&uccp->gumr_l, + UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | + UCC_SLOW_GUMR_L_RDCR_MASK, + UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 | + UCC_SLOW_GUMR_L_RDCR_16); + + clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW, + UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX); + +#ifdef LOOPBACK + clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK, + UCC_SLOW_GUMR_L_DIAG_LOOP); + clrsetbits_be32(&uccp->gumr_h, + UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN, + UCC_SLOW_GUMR_H_CDS); +#endif + + /* Enable rx interrupts and clear all pending events. */ + out_be16(&uccp->uccm, 0); + out_be16(&uccp->ucce, 0xffff); + out_be16(&uccp->udsr, 0x7e7e); + + /* Initialize UPSMR */ + out_be16(&uccp->upsmr, 0); + + if (soft_uart) { + out_be16(&uccup->supsmr, 0x30); + out_be16(&uccup->res92, 0); + out_be32(&uccup->rx_state, 0); + out_be32(&uccup->rx_cnt, 0); + out_8(&uccup->rx_bitmark, 0); + out_8(&uccup->rx_length, 10); + out_be32(&uccup->dump_ptr, 0x4000); + out_8(&uccup->rx_temp_dlst_qe, 0); + out_be32(&uccup->rx_frame_rem, 0); + out_8(&uccup->rx_frame_rem_size, 0); + /* Soft-UART requires TX to be 1X */ + out_8(&uccup->tx_mode, + UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1); + out_be16(&uccup->tx_state, 0); + out_8(&uccup->resD4, 0); + out_be16(&uccup->resD5, 0); + + /* Set UART mode. + * Enable receive and transmit. + */ + + /* From the microcode errata: + * 1.GUMR_L register, set mode=0010 (QMC). + * 2.Set GUMR_H[17] bit. (UART/AHDLC mode). + * 3.Set GUMR_H[19:20] (Transparent mode) + * 4.Clear GUMR_H[26] (RFW) + * ... + * 6.Receiver must use 16x over sampling + */ + clrsetbits_be32(&uccp->gumr_l, + UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | + UCC_SLOW_GUMR_L_RDCR_MASK, + UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 | + UCC_SLOW_GUMR_L_RDCR_16); + + clrsetbits_be32(&uccp->gumr_h, + UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN, + UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX | + UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL); + +#ifdef LOOPBACK + clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK, + UCC_SLOW_GUMR_L_DIAG_LOOP); + clrbits32(&uccp->gumr_h, UCC_SLOW_GUMR_H_CTSP | + UCC_SLOW_GUMR_H_CDS); +#endif + + cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num); + qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock, + QE_CR_PROTOCOL_UNSPECIFIED, 0); + } +} + +/* + * Initialize the port. + */ +static int qe_uart_startup(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + int ret; + + /* + * If we're using Soft-UART mode, then we need to make sure the + * firmware has been uploaded first. + */ + if (soft_uart && !firmware_loaded) { + dev_err(port->dev, "Soft-UART firmware not uploaded\n"); + return -ENODEV; + } + + qe_uart_initbd(qe_port); + qe_uart_init_ucc(qe_port); + + /* Install interrupt handler. */ + ret = request_irq(port->irq, qe_uart_int, IRQF_SHARED, "ucc-uart", + qe_port); + if (ret) { + dev_err(port->dev, "could not claim IRQ %u\n", port->irq); + return ret; + } + + /* Startup rx-int */ + setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX); + ucc_slow_enable(qe_port->us_private, COMM_DIR_RX_AND_TX); + + return 0; +} + +/* + * Shutdown the port. + */ +static void qe_uart_shutdown(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow __iomem *uccp = qe_port->uccp; + unsigned int timeout = 20; + + /* Disable RX and TX */ + + /* Wait for all the BDs marked sent */ + while (!qe_uart_tx_empty(port)) { + if (!--timeout) { + dev_warn(port->dev, "shutdown timeout\n"); + break; + } + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(2); + } + + if (qe_port->wait_closing) { + /* Wait a bit longer */ + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(qe_port->wait_closing); + } + + /* Stop uarts */ + ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX); + clrbits16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX); + + /* Shut them really down and reinit buffer descriptors */ + ucc_slow_graceful_stop_tx(qe_port->us_private); + qe_uart_initbd(qe_port); + + free_irq(port->irq, qe_port); +} + +/* + * Set the serial port parameters. + */ +static void qe_uart_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow __iomem *uccp = qe_port->uccp; + unsigned int baud; + unsigned long flags; + u16 upsmr = in_be16(&uccp->upsmr); + struct ucc_uart_pram __iomem *uccup = qe_port->uccup; + u16 supsmr = in_be16(&uccup->supsmr); + u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */ + + /* Character length programmed into the mode register is the + * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, + * 1 or 2 stop bits, minus 1. + * The value 'bits' counts this for us. + */ + + /* byte size */ + upsmr &= UCC_UART_UPSMR_CL_MASK; + supsmr &= UCC_UART_SUPSMR_CL_MASK; + + switch (termios->c_cflag & CSIZE) { + case CS5: + upsmr |= UCC_UART_UPSMR_CL_5; + supsmr |= UCC_UART_SUPSMR_CL_5; + char_length += 5; + break; + case CS6: + upsmr |= UCC_UART_UPSMR_CL_6; + supsmr |= UCC_UART_SUPSMR_CL_6; + char_length += 6; + break; + case CS7: + upsmr |= UCC_UART_UPSMR_CL_7; + supsmr |= UCC_UART_SUPSMR_CL_7; + char_length += 7; + break; + default: /* case CS8 */ + upsmr |= UCC_UART_UPSMR_CL_8; + supsmr |= UCC_UART_SUPSMR_CL_8; + char_length += 8; + break; + } + + /* If CSTOPB is set, we want two stop bits */ + if (termios->c_cflag & CSTOPB) { + upsmr |= UCC_UART_UPSMR_SL; + supsmr |= UCC_UART_SUPSMR_SL; + char_length++; /* + SL */ + } + + if (termios->c_cflag & PARENB) { + upsmr |= UCC_UART_UPSMR_PEN; + supsmr |= UCC_UART_SUPSMR_PEN; + char_length++; /* + PEN */ + + if (!(termios->c_cflag & PARODD)) { + upsmr &= ~(UCC_UART_UPSMR_RPM_MASK | + UCC_UART_UPSMR_TPM_MASK); + upsmr |= UCC_UART_UPSMR_RPM_EVEN | + UCC_UART_UPSMR_TPM_EVEN; + supsmr &= ~(UCC_UART_SUPSMR_RPM_MASK | + UCC_UART_SUPSMR_TPM_MASK); + supsmr |= UCC_UART_SUPSMR_RPM_EVEN | + UCC_UART_SUPSMR_TPM_EVEN; + } + } + + /* + * Set up parity check flag + */ + port->read_status_mask = BD_SC_EMPTY | BD_SC_OV; + if (termios->c_iflag & INPCK) + port->read_status_mask |= BD_SC_FR | BD_SC_PR; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= BD_SC_BR; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BD_SC_BR; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_OV; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + port->read_status_mask &= ~BD_SC_EMPTY; + + baud = uart_get_baud_rate(port, termios, old, 0, 115200); + + /* Do we really need a spinlock here? */ + spin_lock_irqsave(&port->lock, flags); + + out_be16(&uccp->upsmr, upsmr); + if (soft_uart) { + out_be16(&uccup->supsmr, supsmr); + out_8(&uccup->rx_length, char_length); + + /* Soft-UART requires a 1X multiplier for TX */ + qe_setbrg(qe_port->us_info.rx_clock, baud, 16); + qe_setbrg(qe_port->us_info.tx_clock, baud, 1); + } else { + qe_setbrg(qe_port->us_info.rx_clock, baud, 16); + qe_setbrg(qe_port->us_info.tx_clock, baud, 16); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * Return a pointer to a string that describes what kind of port this is. + */ +static const char *qe_uart_type(struct uart_port *port) +{ + return "QE"; +} + +/* + * Allocate any memory and I/O resources required by the port. + */ +static int qe_uart_request_port(struct uart_port *port) +{ + int ret; + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow_info *us_info = &qe_port->us_info; + struct ucc_slow_private *uccs; + unsigned int rx_size, tx_size; + void *bd_virt; + dma_addr_t bd_dma_addr = 0; + + ret = ucc_slow_init(us_info, &uccs); + if (ret) { + dev_err(port->dev, "could not initialize UCC%u\n", + qe_port->ucc_num); + return ret; + } + + qe_port->us_private = uccs; + qe_port->uccp = uccs->us_regs; + qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram; + qe_port->rx_bd_base = uccs->rx_bd; + qe_port->tx_bd_base = uccs->tx_bd; + + /* + * Allocate the transmit and receive data buffers. + */ + + rx_size = L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize); + tx_size = L1_CACHE_ALIGN(qe_port->tx_nrfifos * qe_port->tx_fifosize); + + bd_virt = dma_alloc_coherent(NULL, rx_size + tx_size, &bd_dma_addr, + GFP_KERNEL); + if (!bd_virt) { + dev_err(port->dev, "could not allocate buffer descriptors\n"); + return -ENOMEM; + } + + qe_port->bd_virt = bd_virt; + qe_port->bd_dma_addr = bd_dma_addr; + qe_port->bd_size = rx_size + tx_size; + + qe_port->rx_buf = bd_virt; + qe_port->tx_buf = qe_port->rx_buf + rx_size; + + return 0; +} + +/* + * Configure the port. + * + * We say we're a CPM-type port because that's mostly true. Once the device + * is configured, this driver operates almost identically to the CPM serial + * driver. + */ +static void qe_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_CPM; + qe_uart_request_port(port); + } +} + +/* + * Release any memory and I/O resources that were allocated in + * qe_uart_request_port(). + */ +static void qe_uart_release_port(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow_private *uccs = qe_port->us_private; + + dma_free_coherent(NULL, qe_port->bd_size, qe_port->bd_virt, + qe_port->bd_dma_addr); + + ucc_slow_free(uccs); +} + +/* + * Verify that the data in serial_struct is suitable for this device. + */ +static int qe_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) + return -EINVAL; + + if (ser->irq < 0 || ser->irq >= NR_IRQS) + return -EINVAL; + + if (ser->baud_base < 9600) + return -EINVAL; + + return 0; +} +/* UART operations + * + * Details on these functions can be found in Documentation/serial/driver + */ +static struct uart_ops qe_uart_pops = { + .tx_empty = qe_uart_tx_empty, + .set_mctrl = qe_uart_set_mctrl, + .get_mctrl = qe_uart_get_mctrl, + .stop_tx = qe_uart_stop_tx, + .start_tx = qe_uart_start_tx, + .stop_rx = qe_uart_stop_rx, + .enable_ms = qe_uart_enable_ms, + .break_ctl = qe_uart_break_ctl, + .startup = qe_uart_startup, + .shutdown = qe_uart_shutdown, + .set_termios = qe_uart_set_termios, + .type = qe_uart_type, + .release_port = qe_uart_release_port, + .request_port = qe_uart_request_port, + .config_port = qe_uart_config_port, + .verify_port = qe_uart_verify_port, +}; + +/* + * Obtain the SOC model number and revision level + * + * This function parses the device tree to obtain the SOC model. It then + * reads the SVR register to the revision. + * + * The device tree stores the SOC model two different ways. + * + * The new way is: + * + * cpu@0 { + * compatible = "PowerPC,8323"; + * device_type = "cpu"; + * ... + * + * + * The old way is: + * PowerPC,8323@0 { + * device_type = "cpu"; + * ... + * + * This code first checks the new way, and then the old way. + */ +static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l) +{ + struct device_node *np; + const char *soc_string; + unsigned int svr; + unsigned int soc; + + /* Find the CPU node */ + np = of_find_node_by_type(NULL, "cpu"); + if (!np) + return 0; + /* Find the compatible property */ + soc_string = of_get_property(np, "compatible", NULL); + if (!soc_string) + /* No compatible property, so try the name. */ + soc_string = np->name; + + /* Extract the SOC number from the "PowerPC," string */ + if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc) + return 0; + + /* Get the revision from the SVR */ + svr = mfspr(SPRN_SVR); + *rev_h = (svr >> 4) & 0xf; + *rev_l = svr & 0xf; + + return soc; +} + +/* + * requst_firmware_nowait() callback function + * + * This function is called by the kernel when a firmware is made available, + * or if it times out waiting for the firmware. + */ +static void uart_firmware_cont(const struct firmware *fw, void *context) +{ + struct qe_firmware *firmware; + struct device *dev = context; + int ret; + + if (!fw) { + dev_err(dev, "firmware not found\n"); + return; + } + + firmware = (struct qe_firmware *) fw->data; + + if (firmware->header.length != fw->size) { + dev_err(dev, "invalid firmware\n"); + return; + } + + ret = qe_upload_firmware(firmware); + if (ret) { + dev_err(dev, "could not load firmware\n"); + return; + } + + firmware_loaded = 1; +} + +static int ucc_uart_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct device_node *np = ofdev->node; + const unsigned int *iprop; /* Integer OF properties */ + const char *sprop; /* String OF properties */ + struct uart_qe_port *qe_port = NULL; + struct resource res; + int ret; + + /* + * Determine if we need Soft-UART mode + */ + if (of_find_property(np, "soft-uart", NULL)) { + dev_dbg(&ofdev->dev, "using Soft-UART mode\n"); + soft_uart = 1; + } + + /* + * If we are using Soft-UART, determine if we need to upload the + * firmware, too. + */ + if (soft_uart) { + struct qe_firmware_info *qe_fw_info; + + qe_fw_info = qe_get_firmware_info(); + + /* Check if the firmware has been uploaded. */ + if (qe_fw_info && strstr(qe_fw_info->id, "Soft-UART")) { + firmware_loaded = 1; + } else { + char filename[32]; + unsigned int soc; + unsigned int rev_h; + unsigned int rev_l; + + soc = soc_info(&rev_h, &rev_l); + if (!soc) { + dev_err(&ofdev->dev, "unknown CPU model\n"); + return -ENXIO; + } + sprintf(filename, "fsl_qe_ucode_uart_%u_%u%u.bin", + soc, rev_h, rev_l); + + dev_info(&ofdev->dev, "waiting for firmware %s\n", + filename); + + /* + * We call request_firmware_nowait instead of + * request_firmware so that the driver can load and + * initialize the ports without holding up the rest of + * the kernel. If hotplug support is enabled in the + * kernel, then we use it. + */ + ret = request_firmware_nowait(THIS_MODULE, + FW_ACTION_HOTPLUG, filename, &ofdev->dev, + &ofdev->dev, uart_firmware_cont); + if (ret) { + dev_err(&ofdev->dev, + "could not load firmware %s\n", + filename); + return ret; + } + } + } + + qe_port = kzalloc(sizeof(struct uart_qe_port), GFP_KERNEL); + if (!qe_port) { + dev_err(&ofdev->dev, "can't allocate QE port structure\n"); + return -ENOMEM; + } + + /* Search for IRQ and mapbase */ + ret = of_address_to_resource(np, 0, &res); + if (ret) { + dev_err(&ofdev->dev, "missing 'reg' property in device tree\n"); + kfree(qe_port); + return ret; + } + if (!res.start) { + dev_err(&ofdev->dev, "invalid 'reg' property in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + qe_port->port.mapbase = res.start; + + /* Get the UCC number (device ID) */ + /* UCCs are numbered 1-7 */ + iprop = of_get_property(np, "device-id", NULL); + if (!iprop || (*iprop < 1) || (*iprop > UCC_MAX_NUM)) { + dev_err(&ofdev->dev, + "missing or invalid UCC specified in device tree\n"); + kfree(qe_port); + return -ENODEV; + } + qe_port->ucc_num = *iprop - 1; + + /* + * In the future, we should not require the BRG to be specified in the + * device tree. If no clock-source is specified, then just pick a BRG + * to use. This requires a new QE library function that manages BRG + * assignments. + */ + + sprop = of_get_property(np, "rx-clock-name", NULL); + if (!sprop) { + dev_err(&ofdev->dev, "missing rx-clock-name in device tree\n"); + kfree(qe_port); + return -ENODEV; + } + + qe_port->us_info.rx_clock = qe_clock_source(sprop); + if ((qe_port->us_info.rx_clock < QE_BRG1) || + (qe_port->us_info.rx_clock > QE_BRG16)) { + dev_err(&ofdev->dev, "rx-clock-name must be a BRG for UART\n"); + kfree(qe_port); + return -ENODEV; + } + +#ifdef LOOPBACK + /* In internal loopback mode, TX and RX must use the same clock */ + qe_port->us_info.tx_clock = qe_port->us_info.rx_clock; +#else + sprop = of_get_property(np, "tx-clock-name", NULL); + if (!sprop) { + dev_err(&ofdev->dev, "missing tx-clock-name in device tree\n"); + kfree(qe_port); + return -ENODEV; + } + qe_port->us_info.tx_clock = qe_clock_source(sprop); +#endif + if ((qe_port->us_info.tx_clock < QE_BRG1) || + (qe_port->us_info.tx_clock > QE_BRG16)) { + dev_err(&ofdev->dev, "tx-clock-name must be a BRG for UART\n"); + kfree(qe_port); + return -ENODEV; + } + + /* Get the port number, numbered 0-3 */ + iprop = of_get_property(np, "port-number", NULL); + if (!iprop) { + dev_err(&ofdev->dev, "missing port-number in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + qe_port->port.line = *iprop; + if (qe_port->port.line >= UCC_MAX_UART) { + dev_err(&ofdev->dev, "port-number must be 0-%u\n", + UCC_MAX_UART - 1); + kfree(qe_port); + return -EINVAL; + } + + qe_port->port.irq = irq_of_parse_and_map(np, 0); + if (qe_port->port.irq == NO_IRQ) { + dev_err(&ofdev->dev, "could not map IRQ for UCC%u\n", + qe_port->ucc_num + 1); + kfree(qe_port); + return -EINVAL; + } + + /* + * Newer device trees have an "fsl,qe" compatible property for the QE + * node, but we still need to support older device trees. + */ + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!np) { + np = of_find_node_by_type(NULL, "qe"); + if (!np) { + dev_err(&ofdev->dev, "could not find 'qe' node\n"); + kfree(qe_port); + return -EINVAL; + } + } + + iprop = of_get_property(np, "brg-frequency", NULL); + if (!iprop) { + dev_err(&ofdev->dev, + "missing brg-frequency in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + + if (*iprop) + qe_port->port.uartclk = *iprop; + else { + /* + * Older versions of U-Boot do not initialize the brg-frequency + * property, so in this case we assume the BRG frequency is + * half the QE bus frequency. + */ + iprop = of_get_property(np, "bus-frequency", NULL); + if (!iprop) { + dev_err(&ofdev->dev, + "missing QE bus-frequency in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + if (*iprop) + qe_port->port.uartclk = *iprop / 2; + else { + dev_err(&ofdev->dev, + "invalid QE bus-frequency in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + } + + spin_lock_init(&qe_port->port.lock); + qe_port->np = np; + qe_port->port.dev = &ofdev->dev; + qe_port->port.ops = &qe_uart_pops; + qe_port->port.iotype = UPIO_MEM; + + qe_port->tx_nrfifos = TX_NUM_FIFO; + qe_port->tx_fifosize = TX_BUF_SIZE; + qe_port->rx_nrfifos = RX_NUM_FIFO; + qe_port->rx_fifosize = RX_BUF_SIZE; + + qe_port->wait_closing = UCC_WAIT_CLOSING; + qe_port->port.fifosize = 512; + qe_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + + qe_port->us_info.ucc_num = qe_port->ucc_num; + qe_port->us_info.regs = (phys_addr_t) res.start; + qe_port->us_info.irq = qe_port->port.irq; + + qe_port->us_info.rx_bd_ring_len = qe_port->rx_nrfifos; + qe_port->us_info.tx_bd_ring_len = qe_port->tx_nrfifos; + + /* Make sure ucc_slow_init() initializes both TX and RX */ + qe_port->us_info.init_tx = 1; + qe_port->us_info.init_rx = 1; + + /* Add the port to the uart sub-system. This will cause + * qe_uart_config_port() to be called, so the us_info structure must + * be initialized. + */ + ret = uart_add_one_port(&ucc_uart_driver, &qe_port->port); + if (ret) { + dev_err(&ofdev->dev, "could not add /dev/ttyQE%u\n", + qe_port->port.line); + kfree(qe_port); + return ret; + } + + dev_set_drvdata(&ofdev->dev, qe_port); + + dev_info(&ofdev->dev, "UCC%u assigned to /dev/ttyQE%u\n", + qe_port->ucc_num + 1, qe_port->port.line); + + /* Display the mknod command for this device */ + dev_dbg(&ofdev->dev, "mknod command is 'mknod /dev/ttyQE%u c %u %u'\n", + qe_port->port.line, SERIAL_QE_MAJOR, + SERIAL_QE_MINOR + qe_port->port.line); + + return 0; +} + +static int ucc_uart_remove(struct of_device *ofdev) +{ + struct uart_qe_port *qe_port = dev_get_drvdata(&ofdev->dev); + + dev_info(&ofdev->dev, "removing /dev/ttyQE%u\n", qe_port->port.line); + + uart_remove_one_port(&ucc_uart_driver, &qe_port->port); + + dev_set_drvdata(&ofdev->dev, NULL); + kfree(qe_port); + + return 0; +} + +static struct of_device_id ucc_uart_match[] = { + { + .type = "serial", + .compatible = "ucc_uart", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, ucc_uart_match); + +static struct of_platform_driver ucc_uart_of_driver = { + .owner = THIS_MODULE, + .name = "ucc_uart", + .match_table = ucc_uart_match, + .probe = ucc_uart_probe, + .remove = ucc_uart_remove, +}; + +static int __init ucc_uart_init(void) +{ + int ret; + + printk(KERN_INFO "Freescale QUICC Engine UART device driver\n"); +#ifdef LOOPBACK + printk(KERN_INFO "ucc-uart: Using loopback mode\n"); +#endif + + ret = uart_register_driver(&ucc_uart_driver); + if (ret) { + printk(KERN_ERR "ucc-uart: could not register UART driver\n"); + return ret; + } + + ret = of_register_platform_driver(&ucc_uart_of_driver); + if (ret) + printk(KERN_ERR + "ucc-uart: could not register platform driver\n"); + + return ret; +} + +static void __exit ucc_uart_exit(void) +{ + printk(KERN_INFO + "Freescale QUICC Engine UART device driver unloading\n"); + + of_unregister_platform_driver(&ucc_uart_of_driver); + uart_unregister_driver(&ucc_uart_driver); +} + +module_init(ucc_uart_init); +module_exit(ucc_uart_exit); + +MODULE_DESCRIPTION("Freescale QUICC Engine (QE) UART"); +MODULE_AUTHOR("Timur Tabi "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_QE_MAJOR); + -- cgit v0.10.2 From e5091842dc067c0c9ae0d8a26f9e2eecf7df34f3 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 2 Jan 2008 12:50:01 -0500 Subject: [POWERPC] 85xx: mpc85xx_ads: add in missing of_node_put() Add in missing of_node_put() after cpm2_pic_init(). This and other coding style cleanups as suggested by Stephen Rothwell. Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index eb0a46b..4e03050 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -52,9 +52,9 @@ static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) { int cascade_irq; - while ((cascade_irq = cpm2_get_irq()) >= 0) { + while ((cascade_irq = cpm2_get_irq()) >= 0) generic_handle_irq(cascade_irq); - } + desc->chip->eoi(irq); } @@ -70,13 +70,12 @@ static void __init mpc85xx_ads_pic_init(void) #endif np = of_find_node_by_type(np, "open-pic"); - - if (np == NULL) { + if (!np) { printk(KERN_ERR "Could not find open-pic node\n"); return; } - if(of_address_to_resource(np, 0, &r)) { + if (of_address_to_resource(np, 0, &r)) { printk(KERN_ERR "Could not map mpic register space\n"); of_node_put(np); return; @@ -100,6 +99,7 @@ static void __init mpc85xx_ads_pic_init(void) irq = irq_of_parse_and_map(np, 0); cpm2_pic_init(np); + of_node_put(np); set_irq_chained_handler(irq, cpm2_cascade); #endif } @@ -112,7 +112,7 @@ struct cpm_pin { int port, pin, flags; }; -static struct cpm_pin mpc8560_ads_pins[] = { +static const struct cpm_pin mpc8560_ads_pins[] = { /* SCC1 */ {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, -- cgit v0.10.2 From e3bc3a09bdfc1b3b88b32d7960c4c3b84a2b860f Mon Sep 17 00:00:00 2001 From: Liu Yu Date: Fri, 18 Jan 2008 11:21:39 +0800 Subject: [POWERPC] Fix carry bug in 128-bit unsigned integer adding Synchronize it to the definition in include/math-emu/op-4.h for short term. Signed-off-by: Liu Yu Signed-off-by: Kumar Gala diff --git a/arch/powerpc/math-emu/op-4.h b/arch/powerpc/math-emu/op-4.h index fcdd6d0..c9ae626 100644 --- a/arch/powerpc/math-emu/op-4.h +++ b/arch/powerpc/math-emu/op-4.h @@ -194,19 +194,39 @@ (X##_f[3] = I3, X##_f[2] = I2, X##_f[1] = I1, X##_f[0] = I0) #ifndef __FP_FRAC_ADD_4 -#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ - (r0 = x0 + y0, \ - r1 = x1 + y1 + (r0 < x0), \ - r2 = x2 + y2 + (r1 < x1), \ - r3 = x3 + y3 + (r2 < x2)) +#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ + do { \ + int _c1, _c2, _c3; \ + r0 = x0 + y0; \ + _c1 = r0 < x0; \ + r1 = x1 + y1; \ + _c2 = r1 < x1; \ + r1 += _c1; \ + _c2 |= r1 < _c1; \ + r2 = x2 + y2; \ + _c3 = r2 < x2; \ + r2 += _c2; \ + _c3 |= r2 < _c2; \ + r3 = x3 + y3 + _c3; \ + } while (0) #endif #ifndef __FP_FRAC_SUB_4 -#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ - (r0 = x0 - y0, \ - r1 = x1 - y1 - (r0 > x0), \ - r2 = x2 - y2 - (r1 > x1), \ - r3 = x3 - y3 - (r2 > x2)) +#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ + do { \ + int _c1, _c2, _c3; \ + r0 = x0 - y0; \ + _c1 = r0 > x0; \ + r1 = x1 - y1; \ + _c2 = r1 > x1; \ + r1 -= _c1; \ + _c2 |= r1 > _c1; \ + r2 = x2 - y2; \ + _c3 = r2 > x2; \ + r2 -= _c2; \ + _c3 |= r2 > _c2; \ + r3 = x3 - y3 - _c3; \ + } while (0) #endif #ifndef __FP_FRAC_ADDI_4 -- cgit v0.10.2 From a7267d679fc5a2f1d3f3f247e22a9824f17b507a Mon Sep 17 00:00:00 2001 From: John Rigby Date: Thu, 17 Jan 2008 17:05:32 -0700 Subject: [POWERPC] Add support for mpc512x interrupts to ipic Added ipic_info entries for vectors used by 512x that were previously unused by 83xx. Signed-off-by: John Rigby Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index 7274750..4c016da 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -48,6 +48,13 @@ static struct ipic_info ipic_info[] = { .bit = 17, .prio_mask = 1, }, + [3] = { + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_C, + .force = IPIC_SIFCR_H, + .bit = 18, + .prio_mask = 2, + }, [4] = { .mask = IPIC_SIMSR_H, .prio = IPIC_SIPRR_C, @@ -55,6 +62,34 @@ static struct ipic_info ipic_info[] = { .bit = 19, .prio_mask = 3, }, + [5] = { + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_C, + .force = IPIC_SIFCR_H, + .bit = 20, + .prio_mask = 4, + }, + [6] = { + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_C, + .force = IPIC_SIFCR_H, + .bit = 21, + .prio_mask = 5, + }, + [7] = { + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_C, + .force = IPIC_SIFCR_H, + .bit = 22, + .prio_mask = 6, + }, + [8] = { + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_C, + .force = IPIC_SIFCR_H, + .bit = 23, + .prio_mask = 7, + }, [9] = { .mask = IPIC_SIMSR_H, .prio = IPIC_SIPRR_D, @@ -223,6 +258,20 @@ static struct ipic_info ipic_info[] = { .bit = 7, .prio_mask = 7, }, + [40] = { + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_B, + .force = IPIC_SIFCR_H, + .bit = 8, + .prio_mask = 0, + }, + [41] = { + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_B, + .force = IPIC_SIFCR_H, + .bit = 9, + .prio_mask = 1, + }, [42] = { .mask = IPIC_SIMSR_H, .prio = IPIC_SIPRR_B, @@ -230,6 +279,13 @@ static struct ipic_info ipic_info[] = { .bit = 10, .prio_mask = 2, }, + [43] = { + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_B, + .force = IPIC_SIFCR_H, + .bit = 11, + .prio_mask = 3, + }, [44] = { .mask = IPIC_SIMSR_H, .prio = IPIC_SIPRR_B, @@ -387,6 +443,12 @@ static struct ipic_info ipic_info[] = { .force = IPIC_SIFCR_L, .bit = 18, }, + [83] = { + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 19, + }, [84] = { .mask = IPIC_SIMSR_L, .prio = 0, -- cgit v0.10.2 From b0bbad60680a5e76067eb1e55c3676b28abe7481 Mon Sep 17 00:00:00 2001 From: John Rigby Date: Thu, 17 Jan 2008 17:05:31 -0700 Subject: [POWERPC] Add IPIC Kconfig option IPIC is not just for 83xx anymore so make it a separate config option. Signed-off-by: John Rigby Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 18f101b..2cec3431 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -22,6 +22,7 @@ config PPC_83xx depends on 6xx select FSL_SOC select 83xx + select IPIC select WANT_DEVICE_TREE config PPC_86xx @@ -80,6 +81,10 @@ config XICS bool default y +config IPIC + bool + default n + config MPIC bool default n diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 9a20ef4..66fe39c 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_AXON_RAM) += axonram.o ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o obj-$(CONFIG_PPC_I8259) += i8259.o -obj-$(CONFIG_PPC_83xx) += ipic.o +obj-$(CONFIG_IPIC) += ipic.o obj-$(CONFIG_4xx) += uic.o obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o ifeq ($(CONFIG_PCI),y) -- cgit v0.10.2 From c7d24a2dd02b9fe736e13931ee3e4a1f4f89cb47 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 18 Jan 2008 09:24:53 -0600 Subject: [POWERPC] Update MPC8610 HPCD to support audio drivers Update the MPC8610 HPCD files to support the audio driver. Update booting-without-of.txt with information on the SSI device. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index a13d457..da98154 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -56,6 +56,7 @@ Table of Contents m) Chipselect/Local Bus n) 4xx/Axon EMAC ethernet nodes o) Xilinx IP cores + p) Freescale Synchronous Serial Interface VII - Specifying interrupt information for devices 1) interrupts property @@ -2575,6 +2576,46 @@ platforms are moved over to use the flattened-device-tree model. Requred properties: - current-speed : Baud rate of uartlite + p) Freescale Synchronous Serial Interface + + The SSI is a serial device that communicates with audio codecs. It can + be programmed in AC97, I2S, left-justified, or right-justified modes. + + Required properties: + - compatible : compatible list, containing "fsl,ssi" + - cell-index : the SSI, <0> = SSI1, <1> = SSI2, and so on + - reg : offset and length of the register set for the device + - interrupts : where a is the interrupt number and b is a + field that represents an encoding of the sense and + level information for the interrupt. This should be + encoded based on the information in section 2) + depending on the type of interrupt controller you + have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + - fsl,mode : the operating mode for the SSI interface + "i2s-slave" - I2S mode, SSI is clock slave + "i2s-master" - I2S mode, SSI is clock master + "lj-slave" - left-justified mode, SSI is clock slave + "lj-master" - l.j. mode, SSI is clock master + "rj-slave" - right-justified mode, SSI is clock slave + "rj-master" - r.j., SSI is clock master + "ac97-slave" - AC97 mode, SSI is clock slave + "ac97-master" - AC97 mode, SSI is clock master + + Optional properties: + - codec-handle : phandle to a 'codec' node that defines an audio + codec connected to this SSI. This node is typically + a child of an I2C or other control node. + + Child 'codec' node required properties: + - compatible : compatible list, contains the name of the codec + + Child 'codec' node optional properties: + - clock-frequency : The frequency of the input clock, which typically + comes from an on-board dedicated oscillator. + + More devices will be defined as this spec matures. VII - Specifying interrupt information for devices diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 01040a7..d98715c 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -1,7 +1,7 @@ /* * MPC8610 HPCD Device Tree Source * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007-2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License Version 2 as published @@ -49,6 +49,7 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; + compatible = "fsl,mpc8610-immr", "simple-bus"; ranges = <0 e0000000 00100000>; reg = ; bus-frequency = <0>; @@ -62,6 +63,13 @@ interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; + + cs4270:codec@4f { + compatible = "cirrus,cs4270"; + reg = <4f>; + /* MCLK source is a stand-alone oscillator */ + clock-frequency = ; + }; }; i2c@3100 { @@ -111,6 +119,109 @@ reg = ; fsl,has-rstcr; }; + + i2s@16000 { + compatible = "fsl,mpc8610-ssi"; + cell-index = <0>; + reg = <16000 100>; + interrupt-parent = <&mpic>; + interrupts = <3e 2>; + fsl,mode = "i2s-slave"; + codec-handle = <&cs4270>; + }; + + ssi@16100 { + compatible = "fsl,mpc8610-ssi"; + cell-index = <1>; + reg = <16100 100>; + interrupt-parent = <&mpic>; + interrupts = <3f 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma"; + cell-index = <0>; + reg = <21300 4>; /* DMA general status register */ + ranges = <0 21100 200>; + + dma-channel@0 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <0>; + reg = <0 80>; + interrupt-parent = <&mpic>; + interrupts = <14 2>; + }; + dma-channel@1 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <1>; + reg = <80 80>; + interrupt-parent = <&mpic>; + interrupts = <15 2>; + }; + dma-channel@2 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <2>; + reg = <100 80>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + dma-channel@3 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <3>; + reg = <180 80>; + interrupt-parent = <&mpic>; + interrupts = <17 2>; + }; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma"; + cell-index = <1>; + reg = ; /* DMA general status register */ + ranges = <0 c100 200>; + + dma-channel@0 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,mpc8540-dma-channel"; + cell-index = <0>; + reg = <0 80>; + interrupt-parent = <&mpic>; + interrupts = <3c 2>; + }; + dma-channel@1 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,mpc8540-dma-channel"; + cell-index = <1>; + reg = <80 80>; + interrupt-parent = <&mpic>; + interrupts = <3d 2>; + }; + dma-channel@2 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,mpc8540-dma-channel"; + cell-index = <2>; + reg = <100 80>; + interrupt-parent = <&mpic>; + interrupts = <3e 2>; + }; + dma-channel@3 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,mpc8540-dma-channel"; + cell-index = <3>; + reg = <180 80>; + interrupt-parent = <&mpic>; + interrupts = <3f 2>; + }; + }; + }; pci0: pci@e0008000 { diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig index 9614d24..2500ef4 100644 --- a/arch/powerpc/configs/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig @@ -696,7 +696,7 @@ CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set @@ -708,7 +708,60 @@ CONFIG_UNIX98_PTYS=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # # SPI support @@ -763,7 +816,119 @@ CONFIG_DUMMY_CONSOLE=y # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_PCM_OSS_PLUGINS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# ALSA PowerMac devices +# + +# +# ALSA PowerPC devices +# + +# +# System on Chip audio support +# +CONFIG_SND_SOC=y + +# +# SoC Audio support for SuperH +# + +# +# ALSA SoC audio for Freescale SOCs +# +CONFIG_SND_SOC_MPC8610=y +CONFIG_SND_SOC_MPC8610_HPCD=y +CONFIG_SND_SOC_CS4270=y +CONFIG_SND_SOC_CS4270_VD33_ERRATA=y + CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index c6d2f48..0b07485 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -34,9 +34,24 @@ #include +#include #include #include +static struct of_device_id __initdata mpc8610_ids[] = { + { .compatible = "fsl,mpc8610-immr", }, + {} +}; + +static int __init mpc8610_declare_of_platform_devices(void) +{ + /* Without this call, the SSI device driver won't get probed. */ + of_platform_bus_probe(NULL, mpc8610_ids, NULL); + + return 0; +} +machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices); + void __init mpc86xx_hpcd_init_irq(void) { -- cgit v0.10.2 From 6c7e072b1682eeb7c17ed5fdec0672fcf3ccb205 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 14 Jan 2008 10:29:35 -0600 Subject: [POWERPC] fsl_soc: Fix get_immrbase() to use ranges, rather than reg. Don't depend on the reg property as a way to determine the base of the immr space. The reg property might be defined differently for different SoC families. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 474cb8e..f2c0988 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -55,10 +55,18 @@ phys_addr_t get_immrbase(void) soc = of_find_node_by_type(NULL, "soc"); if (soc) { int size; - const void *prop = of_get_property(soc, "reg", &size); + u32 naddr; + const u32 *prop = of_get_property(soc, "#address-cells", &size); + if (prop && size == 4) + naddr = *prop; + else + naddr = 2; + + prop = of_get_property(soc, "ranges", &size); if (prop) - immrbase = of_translate_address(soc, prop); + immrbase = of_translate_address(soc, prop + naddr); + of_node_put(soc); } -- cgit v0.10.2 From e8b63761554aca641bd9020447d487bfd85111bf Mon Sep 17 00:00:00 2001 From: Dale Farnsworth Date: Thu, 22 Nov 2007 08:46:20 -0700 Subject: [POWERPC] 85xx: Respect KERNELBASE, PAGE_OFFSET, and PHYSICAL_START on e500 The e500 MMU init code previously assumed KERNELBASE always equaled PAGE_OFFSET and PHYSICAL_START was 0. This is useful for kdump support as well as asymetric multicore. For the initial kdump support the secondary kernel will run at 32M but need access to all of memory so we bump the initial TLB up to 64M. This also matches with the forth coming ePAPR spec. Signed-off-by: Dale Farnsworth Signed-off-by: Kumar Gala diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 7aecb39..d9cc2c2 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -73,8 +73,8 @@ _ENTRY(_start); /* We try to not make any assumptions about how the boot loader * setup or used the TLBs. We invalidate all mappings from the * boot loader and load a single entry in TLB1[0] to map the - * first 16M of kernel memory. Any boot info passed from the - * bootloader needs to live in this first 16M. + * first 64M of kernel memory. Any boot info passed from the + * bootloader needs to live in this first 64M. * * Requirement on bootloader: * - The page we're executing in needs to reside in TLB1 and @@ -167,7 +167,7 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_MAS0,r7 tlbre - /* Just modify the entry ID and EPN for the temp mapping */ + /* Just modify the entry ID, EPN and RPN for the temp mapping */ lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ mtspr SPRN_MAS0,r7 @@ -177,9 +177,12 @@ skpinv: addi r6,r6,1 /* Increment */ ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l mtspr SPRN_MAS1,r6 mfspr r6,SPRN_MAS2 - li r7,0 /* temp EPN = 0 */ + lis r7,PHYSICAL_START@h rlwimi r7,r6,0,20,31 mtspr SPRN_MAS2,r7 + mfspr r6,SPRN_MAS3 + rlwimi r7,r6,0,20,31 + mtspr SPRN_MAS3,r7 tlbwe xori r6,r4,1 @@ -222,11 +225,11 @@ skpinv: addi r6,r6,1 /* Increment */ lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */ mtspr SPRN_MAS0,r6 lis r6,(MAS1_VALID|MAS1_IPROT)@h - ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_16M))@l + ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l mtspr SPRN_MAS1,r6 li r7,0 - lis r6,KERNELBASE@h - ori r6,r6,KERNELBASE@l + lis r6,PAGE_OFFSET@h + ori r6,r6,PAGE_OFFSET@l rlwimi r6,r7,0,20,31 mtspr SPRN_MAS2,r6 li r7,(MAS3_SX|MAS3_SW|MAS3_SR) @@ -234,6 +237,9 @@ skpinv: addi r6,r6,1 /* Increment */ tlbwe /* 7. Jump to KERNELBASE mapping */ + lis r6,KERNELBASE@h + ori r6,r6,KERNELBASE@l + rlwimi r6,r7,0,20,31 lis r7,MSR_KERNEL@h ori r7,r7,MSR_KERNEL@l bl 1f /* Find our address */ diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index 17139da..c93a966 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -165,15 +165,15 @@ void invalidate_tlbcam_entry(int index) void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1, unsigned long cam2) { - settlbcam(0, KERNELBASE, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0); + settlbcam(0, PAGE_OFFSET, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0); tlbcam_index++; if (cam1) { tlbcam_index++; - settlbcam(1, KERNELBASE+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0); + settlbcam(1, PAGE_OFFSET+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0); } if (cam2) { tlbcam_index++; - settlbcam(2, KERNELBASE+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0); + settlbcam(2, PAGE_OFFSET+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0); } } -- cgit v0.10.2 From b09c16440eb39c12cc91aea5b572c753a5567d57 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 17 Jan 2008 16:31:40 -0600 Subject: [POWERPC] 8xx: Analogue & Micro Adder875 board support. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 66a3d8c..47fe256 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -140,6 +140,9 @@ config DEFAULT_UIMAGE Used to allow a board to specify it wants a uImage built by default default n +config REDBOOT + bool + config PPC64_SWSUSP bool depends on PPC64 && (BROKEN || (PPC_PMAC64 && EXPERIMENTAL)) diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index b160322..5ef2bdf 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -31,6 +31,7 @@ zImage.*lds zImage.miboot zImage.pmac zImage.pseries +zImage.redboot* zImage.sandpoint zImage.vmode zconf.h diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index d1e625c..08bf7aa 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -62,7 +62,7 @@ src-plat := of.c cuboot-52xx.c cuboot-83xx.c cuboot-85xx.c holly.c \ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \ fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c \ - cuboot-katmai.c cuboot-rainier.c + cuboot-katmai.c cuboot-rainier.c redboot-8xx.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -208,6 +208,10 @@ image-$(CONFIG_TAISHAN) += cuImage.taishan image-$(CONFIG_KATMAI) += cuImage.katmai endif +ifneq ($(CONFIG_REDBOOT),"") +image-$(CONFIG_PPC_8xx) += zImage.redboot-8xx +endif + # For 32-bit powermacs, build the COFF and miboot images # as well as the ELF images. ifeq ($(CONFIG_PPC32),y) diff --git a/arch/powerpc/boot/dts/adder875-redboot.dts b/arch/powerpc/boot/dts/adder875-redboot.dts new file mode 100644 index 0000000..8f7a79f --- /dev/null +++ b/arch/powerpc/boot/dts/adder875-redboot.dts @@ -0,0 +1,184 @@ +/* + * Device Tree Source for MPC885 ADS running RedBoot + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "Analogue & Micro Adder MPC875"; + compatible = "analogue-and-micro,adder875"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + console = &console; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,875@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x01000000>; + }; + + localbus@fa200100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xfa200100 0x40>; + + ranges = < + 0 0 0xfe000000 0x00800000 + 2 0 0xfa100000 0x00008000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + bank-width = <4>; + device-width = <2>; + }; + }; + + soc@fa200000 { + compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfa200000 0x00004000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + // Temporary until get_immrbase() is fixed. + reg = <0xfa200000 0x4000>; + + mdio@e00 { + compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0>; + device_type = "ethernet-phy"; + }; + + PHY1: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + eth0: ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + eth1: ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0x1e00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x24>; + compatible = "fsl,mpc875-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus"; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <0x9c0 0x40>; + ranges; + + muram { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc875-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <0x9f0 0x10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc875-cpm-pic", + "fsl,cpm1-pic"; + }; + + console: serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc875-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x0090>; + current-speed = <115200>; + }; + }; + }; + + chosen { + linux,stdout-path = &console; + }; +}; diff --git a/arch/powerpc/boot/dts/adder875-uboot.dts b/arch/powerpc/boot/dts/adder875-uboot.dts new file mode 100644 index 0000000..60d4ad5 --- /dev/null +++ b/arch/powerpc/boot/dts/adder875-uboot.dts @@ -0,0 +1,183 @@ +/* + * Device Tree Source for MPC885 ADS running U-Boot + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "Analogue & Micro Adder MPC875"; + compatible = "analogue-and-micro,adder875"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + console = &console; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,875@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x01000000>; + }; + + localbus@ff000100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xff000100 0x40>; + + ranges = < + 0 0 0xfe000000 0x01000000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + bank-width = <4>; + device-width = <2>; + }; + }; + + soc@ff000000 { + compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff000000 0x00004000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + // Temporary until get_immrbase() is fixed. + reg = <0xff000000 0x4000>; + + mdio@e00 { + compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0>; + device_type = "ethernet-phy"; + }; + + PHY1: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + eth0: ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + eth1: ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0x1e00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x24>; + compatible = "fsl,mpc875-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus"; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <0x9c0 0x40>; + ranges; + + muram { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc875-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <0x9f0 0x10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc875-cpm-pic", + "fsl,cpm1-pic"; + }; + + console: serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc875-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x0090>; + current-speed = <115200>; + }; + }; + }; + + chosen { + linux,stdout-path = &console; + }; +}; diff --git a/arch/powerpc/boot/redboot-8xx.c b/arch/powerpc/boot/redboot-8xx.c new file mode 100644 index 0000000..f7945ad --- /dev/null +++ b/arch/powerpc/boot/redboot-8xx.c @@ -0,0 +1,58 @@ +/* + * RedBoot firmware support + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "redboot.h" +#include "fsl-soc.h" +#include "io.h" + +static bd_t bd; +BSS_STACK(4096); + +#define MHZ(x) ((x + 500000) / 1000000) + +static void platform_fixups(void) +{ + void *node; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq); + + node = finddevice("/soc/cpm/brg"); + if (node) { + printf("BRG clock-frequency <- 0x%x (%dMHz)\r\n", + bd.bi_busfreq, MHZ(bd.bi_busfreq)); + setprop(node, "clock-frequency", &bd.bi_busfreq, 4); + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + memcpy(&bd, (char *)r3, sizeof(bd)); + + if (bd.bi_tag != 0x42444944) + return; + + simple_alloc_init(_end, + bd.bi_memstart + bd.bi_memsize - (unsigned long)_end, + 32, 64); + + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; + + loader_info.cmdline = (char *)bd.bi_cmdline; + loader_info.cmdline_len = strlen((char *)bd.bi_cmdline); +} diff --git a/arch/powerpc/boot/redboot.h b/arch/powerpc/boot/redboot.h new file mode 100644 index 0000000..ace0b7f --- /dev/null +++ b/arch/powerpc/boot/redboot.h @@ -0,0 +1,56 @@ +#ifndef _PPC_REDBOOT_H +#define _PPC_REDBOOT_H + +//========================================================================= +// include/asm-ppc/redboot.h +// Copyright (c) 2002, 2003 Gary Thomas ( +// Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + +// +// Board specific details, as provided by RedBoot +// + +/* A Board Information structure that is given to a program when + * RedBoot starts it up. Note: not all fields make sense for all + * architectures and it's up to the platform specific code to fill + * in the details. + */ +typedef struct bd_info { + unsigned int bi_tag; /* Should be 0x42444944 "BDID" */ + unsigned int bi_size; /* Size of this structure */ + unsigned int bi_revision; /* revision of this structure */ + unsigned int bi_bdate; /* bootstrap date, i.e. 0x19971106 */ + unsigned int bi_memstart; /* Memory start address */ + unsigned int bi_memsize; /* Memory (end) size in bytes */ + unsigned int bi_intfreq; /* Internal Freq, in Hz */ + unsigned int bi_busfreq; /* Bus Freq, in Hz */ + unsigned int bi_cpmfreq; /* CPM Freq, in Hz */ + unsigned int bi_brgfreq; /* BRG Freq, in Hz */ + unsigned int bi_vco; /* VCO Out from PLL */ + unsigned int bi_pci_freq; /* PCI Freq, in Hz */ + unsigned int bi_baudrate; /* Default console baud rate */ + unsigned int bi_immr; /* IMMR when called from boot rom */ + unsigned char bi_enetaddr[6]; + unsigned int bi_flashbase; /* Physical address of FLASH memory */ + unsigned int bi_flashsize; /* Length of FLASH memory */ + int bi_flashwidth; /* Width (8,16,32,64) */ + unsigned char *bi_cmdline; /* Pointer to command line */ + unsigned char bi_esa[3][6]; /* Ethernet station addresses */ + unsigned int bi_ramdisk_begin, bi_ramdisk_end; + struct { /* Information about [main] video screen */ + short x_res; /* Horizontal resolution in pixels */ + short y_res; /* Vertical resolution in pixels */ + short bpp; /* Bits/pixel */ + short mode; /* Type of pixels (packed, indexed) */ + unsigned long fb; /* Pointer to frame buffer (pixel) memory */ + } bi_video; + void (*bi_cputc)(char); /* Write a character to the RedBoot console */ + char (*bi_cgetc)(void); /* Read a character from the RedBoot console */ + int (*bi_ctstc)(void); /* Test for input on the RedBoot console */ +} bd_t; + +#define BI_REV 0x0102 /* Version 1.02 */ + +#define bi_pci_busfreq bi_pci_freq +#define bi_immr_base bi_immr +#endif diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 154df05..a7c4671 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -168,7 +168,7 @@ ps3) ksection=.kernel:vmlinux.bin isection=.kernel:initrd ;; -ep88xc|ep405) +ep88xc|ep405|redboot*) platformo="$object/fixed-head.o $object/$platform.o" binary=y ;; diff --git a/arch/powerpc/configs/adder875-redboot_defconfig b/arch/powerpc/configs/adder875-redboot_defconfig new file mode 100644 index 0000000..cab5f9b --- /dev/null +++ b/arch/powerpc/configs/adder875-redboot_defconfig @@ -0,0 +1,798 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Thu Jan 17 16:17:38 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +CONFIG_PPC_8xx=y +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_8xx=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_REDBOOT=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# Platform support +# +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +CONFIG_CPM1=y +# CONFIG_MPC8XXFADS is not set +# CONFIG_MPC86XADS is not set +# CONFIG_MPC885ADS is not set +# CONFIG_PPC_EP88XC is not set +CONFIG_PPC_ADDER875=y + +# +# MPC8xx CPM Options +# + +# +# Generic MPC8xx Options +# +CONFIG_8xx_COPYBACK=y +# CONFIG_8xx_CPU6 is not set +CONFIG_8xx_CPU15=y +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set +# CONFIG_PQ2ADS is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPM2 is not set +CONFIG_PPC_CPM_NEW_BINDING=y +# CONFIG_FSL_ULI1575 is not set +CONFIG_CPM=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_8XX_MINIMAL_FPEMU is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_HIBERNATION_UP_POSSIBLE=y +# CONFIG_SECCOMP is not set +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="adder875-redboot.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_PCI_QSPAN is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xfd000000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_CFI_FLAGADM is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_FS_ENET=y +# CONFIG_FS_ENET_HAS_SCC is not set +CONFIG_FS_ENET_HAS_FEC=y +CONFIG_FS_ENET_MDIO_FEC=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_CPM_SCC1 is not set +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +CONFIG_SERIAL_CPM_SMC1=y +CONFIG_SERIAL_CPM_SMC2=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/adder875-uboot_defconfig b/arch/powerpc/configs/adder875-uboot_defconfig new file mode 100644 index 0000000..1faf7ef --- /dev/null +++ b/arch/powerpc/configs/adder875-uboot_defconfig @@ -0,0 +1,798 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Thu Jan 17 16:17:18 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +CONFIG_PPC_8xx=y +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_8xx=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_REDBOOT=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# Platform support +# +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +CONFIG_CPM1=y +# CONFIG_MPC8XXFADS is not set +# CONFIG_MPC86XADS is not set +# CONFIG_MPC885ADS is not set +# CONFIG_PPC_EP88XC is not set +CONFIG_PPC_ADDER875=y + +# +# MPC8xx CPM Options +# + +# +# Generic MPC8xx Options +# +CONFIG_8xx_COPYBACK=y +# CONFIG_8xx_CPU6 is not set +CONFIG_8xx_CPU15=y +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set +# CONFIG_PQ2ADS is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPM2 is not set +CONFIG_PPC_CPM_NEW_BINDING=y +# CONFIG_FSL_ULI1575 is not set +CONFIG_CPM=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_8XX_MINIMAL_FPEMU is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_HIBERNATION_UP_POSSIBLE=y +# CONFIG_SECCOMP is not set +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="adder875-uboot.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_PCI_QSPAN is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xfd000000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_CFI_FLAGADM is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_FS_ENET=y +# CONFIG_FS_ENET_HAS_SCC is not set +CONFIG_FS_ENET_HAS_FEC=y +CONFIG_FS_ENET_MDIO_FEC=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_CPM_SCC1 is not set +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +CONFIG_SERIAL_CPM_SMC1=y +CONFIG_SERIAL_CPM_SMC2=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 91fbe42..7fd224c 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -44,6 +44,15 @@ config PPC_EP88XC This board is also resold by Freescale as the QUICCStart MPC885 Evaluation System and/or the CWH-PPC-885XN-VE. +config PPC_ADDER875 + bool "Analogue & Micro Adder 875" + select CPM1 + select PPC_CPM_NEW_BINDING + select REDBOOT + help + This enables support for the Analogue & Micro Adder 875 + board. + endchoice menu "Freescale Ethernet driver platform-specific options" diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile index 8b70980..7b71d9c 100644 --- a/arch/powerpc/platforms/8xx/Makefile +++ b/arch/powerpc/platforms/8xx/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_8xx) += m8xx_setup.o obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o obj-$(CONFIG_PPC_EP88XC) += ep88xc.o +obj-$(CONFIG_PPC_ADDER875) += adder875.o diff --git a/arch/powerpc/platforms/8xx/adder875.c b/arch/powerpc/platforms/8xx/adder875.c new file mode 100644 index 0000000..af040fd --- /dev/null +++ b/arch/powerpc/platforms/8xx/adder875.c @@ -0,0 +1,118 @@ +/* Analogue & Micro Adder MPC875 board support + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +struct cpm_pin { + int port, pin, flags; +}; + +static __initdata struct cpm_pin adder875_pins[] = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* MII1 */ + {CPM_PORTA, 0, CPM_PIN_INPUT}, + {CPM_PORTA, 1, CPM_PIN_INPUT}, + {CPM_PORTA, 2, CPM_PIN_INPUT}, + {CPM_PORTA, 3, CPM_PIN_INPUT}, + {CPM_PORTA, 4, CPM_PIN_OUTPUT}, + {CPM_PORTA, 10, CPM_PIN_OUTPUT}, + {CPM_PORTA, 11, CPM_PIN_OUTPUT}, + {CPM_PORTB, 19, CPM_PIN_INPUT}, + {CPM_PORTB, 31, CPM_PIN_INPUT}, + {CPM_PORTC, 12, CPM_PIN_INPUT}, + {CPM_PORTC, 13, CPM_PIN_INPUT}, + {CPM_PORTE, 30, CPM_PIN_OUTPUT}, + {CPM_PORTE, 31, CPM_PIN_OUTPUT}, + + /* MII2 */ + {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 16, CPM_PIN_OUTPUT}, + {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 21, CPM_PIN_OUTPUT}, + {CPM_PORTE, 22, CPM_PIN_OUTPUT}, + {CPM_PORTE, 23, CPM_PIN_OUTPUT}, + {CPM_PORTE, 24, CPM_PIN_OUTPUT}, + {CPM_PORTE, 25, CPM_PIN_OUTPUT}, + {CPM_PORTE, 26, CPM_PIN_OUTPUT}, + {CPM_PORTE, 27, CPM_PIN_OUTPUT}, + {CPM_PORTE, 28, CPM_PIN_OUTPUT}, + {CPM_PORTE, 29, CPM_PIN_OUTPUT}, +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(adder875_pins); i++) { + const struct cpm_pin *pin = &adder875_pins[i]; + cpm1_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + + /* Set FEC1 and FEC2 to MII mode */ + clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180); +} + +static void __init adder875_setup(void) +{ + cpm_reset(); + init_ioports(); +} + +static int __init adder875_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + return of_flat_dt_is_compatible(root, "analogue-and-micro,adder875"); +} + +static __initdata struct of_device_id __initdata of_bus_ids[] = { + { .compatible = "simple-bus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} +machine_device_initcall(adder875, declare_of_platform_devices); + +define_machine(adder875) { + .name = "Adder MPC875", + .probe = adder875_probe, + .setup_arch = adder875_setup, + .init_IRQ = m8xx_pic_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = generic_calibrate_decr, + .set_rtc_time = mpc8xx_set_rtc_time, + .get_rtc_time = mpc8xx_get_rtc_time, + .progress = udbg_progress, +}; -- cgit v0.10.2 From 0dde1a1df9ab0615ed08558fb7144e7739e9f565 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 17 Jan 2008 16:32:05 -0600 Subject: [POWERPC] 82xx: Embedded Planet EP8248E support This board is also resold by Freescale under the names "QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE". Signed-off-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 08bf7aa..fcca455 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -62,7 +62,7 @@ src-plat := of.c cuboot-52xx.c cuboot-83xx.c cuboot-85xx.c holly.c \ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \ fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c \ - cuboot-katmai.c cuboot-rainier.c redboot-8xx.c + cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -195,6 +195,7 @@ image-$(CONFIG_PPC_8xx) += cuImage.8xx image-$(CONFIG_PPC_EP88XC) += zImage.ep88xc image-$(CONFIG_EP405) += zImage.ep405 image-$(CONFIG_8260) += cuImage.pq2 +image-$(CONFIG_EP8248E) += zImage.ep8248e image-$(CONFIG_PPC_MPC52xx) += cuImage.52xx image-$(CONFIG_PPC_83xx) += cuImage.83xx image-$(CONFIG_PPC_85xx) += cuImage.85xx diff --git a/arch/powerpc/boot/dts/ep8248e.dts b/arch/powerpc/boot/dts/ep8248e.dts new file mode 100644 index 0000000..5d2fb76 --- /dev/null +++ b/arch/powerpc/boot/dts/ep8248e.dts @@ -0,0 +1,207 @@ +/* + * Device Tree for the Embedded Planet EP8248E board running PlanetCore. + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "EP8248E"; + compatible = "fsl,ep8248e"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + planetcore-SMC1 = &smc1; + planetcore-SCC1 = &scc1; + ethernet0 = ð0; + ethernet1 = ð1; + serial0 = &smc1; + serial1 = &scc1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8248@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; + clock-frequency = <0>; + }; + }; + + localbus@f0010100 { + compatible = "fsl,mpc8248-localbus", + "fsl,pq2-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xf0010100 0x40>; + + ranges = <0 0 0xfc000000 0x04000000 + 1 0 0xfa000000 0x00008000>; + + flash@0,3800000 { + compatible = "cfi-flash"; + reg = <0 0x3800000 0x800000>; + bank-width = <4>; + device-width = <2>; + }; + + bcsr@1,0 { + #address-cells = <2>; + #size-cells = <1>; + reg = <1 0 0x10>; + compatible = "fsl,ep8248e-bcsr"; + ranges; + + mdio { + device_type = "mdio"; + compatible = "fsl,ep8248e-mdio-bitbang"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1 8 1>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&PIC>; + reg = <0>; + device_type = "ethernet-phy"; + }; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&PIC>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus"; + ranges = <0x00000000 0xf0000000 0x00053000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <0xf0000000 0x00053000>; + + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8248-cpm", "fsl,cpm2", + "simple-bus"; + reg = <0x119c0 0x30>; + ranges; + + muram { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x1100 0x1140 + 0xec0 0x9800 0x800>; + }; + }; + + brg@119f0 { + compatible = "fsl,mpc8248-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x119f0 0x10 0x115f0 0x10>; + }; + + /* Monitor port/SMC1 */ + smc1: serial@11a80 { + device_type = "serial"; + compatible = "fsl,mpc8248-smc-uart", + "fsl,cpm2-smc-uart"; + reg = <0x11a80 0x20 0x1100 0x40>; + interrupts = <4 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <7>; + fsl,cpm-command = <0x1d000000>; + linux,planetcore-label = "SMC1"; + }; + + /* "Serial" port/SCC1 */ + scc1: serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8248-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x11a00 0x20 0x8000 0x100>; + interrupts = <40 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x00800000>; + linux,planetcore-label = "SCC1"; + }; + + eth0: ethernet@11300 { + device_type = "network"; + compatible = "fsl,mpc8248-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11300 0x20 0x8400 0x100 0x11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + fsl,cpm-command = <0x12000300>; + }; + + eth1: ethernet@11320 { + device_type = "network"; + compatible = "fsl,mpc8248-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <33 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + fsl,cpm-command = <0x16200300>; + }; + + usb@11b60 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8248-usb", + "fsl,cpm2-usb"; + reg = <0x11b60 0x18 0x8b00 0x100>; + interrupt-parent = <&PIC>; + interrupts = <11 8>; + fsl,cpm-command = <0x2e600000>; + }; + }; + + PIC: interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10c00 0x80>; + compatible = "fsl,mpc8248-pic", "fsl,pq2-pic"; + }; + }; +}; diff --git a/arch/powerpc/boot/ep8248e.c b/arch/powerpc/boot/ep8248e.c new file mode 100644 index 0000000..f57d14d --- /dev/null +++ b/arch/powerpc/boot/ep8248e.c @@ -0,0 +1,55 @@ +/* + * Embedded Planet EP8248E with PlanetCore firmware + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "planetcore.h" +#include "pq2.h" + +static char *table; +static u64 mem_size; + +#include + +static void platform_fixups(void) +{ + u64 val; + + dt_fixup_memory(0, mem_size); + planetcore_set_mac_addrs(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) { + printf("No PlanetCore crystal frequency key.\r\n"); + return; + } + + pq2_fixup_clocks(val); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + table = (char *)r3; + planetcore_prepare_table(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size)) + return; + + mem_size *= 1024 * 1024; + simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64); + + fdt_init(_dtb_start); + + planetcore_set_stdout_path(table); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index a7c4671..763a0c4 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -168,7 +168,7 @@ ps3) ksection=.kernel:vmlinux.bin isection=.kernel:initrd ;; -ep88xc|ep405|redboot*) +ep88xc|ep405|redboot*|ep8248e) platformo="$object/fixed-head.o $object/$platform.o" binary=y ;; diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig new file mode 100644 index 0000000..01ad595 --- /dev/null +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -0,0 +1,821 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Fri Jan 11 14:02:06 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# Platform support +# +# CONFIG_PPC_MULTIPLATFORM is not set +CONFIG_PPC_82xx=y +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_MPC8272_ADS is not set +# CONFIG_PQ2FADS is not set +CONFIG_EP8248E=y +# CONFIG_PQ2ADS is not set +CONFIG_8260=y +CONFIG_8272=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +CONFIG_CPM2=y +CONFIG_PPC_CPM_NEW_BINDING=y +# CONFIG_FSL_ULI1575 is not set +CONFIG_CPM=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_HIBERNATION_UP_POSSIBLE=y +# CONFIG_SECCOMP is not set +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="ep8248e.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IP_VS is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +CONFIG_IPV6_SIT=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +# CONFIG_MTD_CFI_I1 is not set +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_FS_ENET=y +# CONFIG_FS_ENET_HAS_SCC is not set +CONFIG_FS_ENET_HAS_FCC=y +# CONFIG_FS_ENET_MDIO_FCC is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +CONFIG_SERIAL_CPM_SCC1=y +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +CONFIG_SERIAL_CPM_SCC4=y +# CONFIG_SERIAL_CPM_SMC1 is not set +# CONFIG_SERIAL_CPM_SMC2 is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_KGDB_CONSOLE is not set +CONFIG_BDI_SWITCH=y +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig index 541fbb8..4fad6c7 100644 --- a/arch/powerpc/platforms/82xx/Kconfig +++ b/arch/powerpc/platforms/82xx/Kconfig @@ -26,6 +26,19 @@ config PQ2FADS help This option enables support for the PQ2FADS board +config EP8248E + bool "Embedded Planet EP8248E (a.k.a. CWH-PPC-8248N-VE)" + select 8272 + select 8260 + select FSL_SOC + select PPC_CPM_NEW_BINDING + select MDIO_BITBANG + help + This enables support for the Embedded Planet EP8248E board. + + This board is also resold by Freescale as the QUICCStart + MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE. + endchoice config PQ2ADS diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile index 68c8b0c..6cd5cd5 100644 --- a/arch/powerpc/platforms/82xx/Makefile +++ b/arch/powerpc/platforms/82xx/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_MPC8272_ADS) += mpc8272_ads.o obj-$(CONFIG_CPM2) += pq2.o obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o obj-$(CONFIG_PQ2FADS) += pq2fads.o +obj-$(CONFIG_EP8248E) += ep8248e.o diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c new file mode 100644 index 0000000..ba93d8a --- /dev/null +++ b/arch/powerpc/platforms/82xx/ep8248e.c @@ -0,0 +1,324 @@ +/* + * Embedded Planet EP8248E support + * + * Copyright 2007 Freescale Semiconductor, Inc. + * Author: Scott Wood + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "pq2.h" + +static u8 __iomem *ep8248e_bcsr; +static struct device_node *ep8248e_bcsr_node; + +#define BCSR7_SCC2_ENABLE 0x10 + +#define BCSR8_PHY1_ENABLE 0x80 +#define BCSR8_PHY1_POWER 0x40 +#define BCSR8_PHY2_ENABLE 0x20 +#define BCSR8_PHY2_POWER 0x10 +#define BCSR8_MDIO_READ 0x04 +#define BCSR8_MDIO_CLOCK 0x02 +#define BCSR8_MDIO_DATA 0x01 + +#define BCSR9_USB_ENABLE 0x80 +#define BCSR9_USB_POWER 0x40 +#define BCSR9_USB_HOST 0x20 +#define BCSR9_USB_FULL_SPEED_TARGET 0x10 + +static void __init ep8248e_pic_init(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic"); + if (!np) { + printk(KERN_ERR "PIC init: can not find cpm-pic node\n"); + return; + } + + cpm2_pic_init(np); + of_node_put(np); +} + +static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level) +{ + if (level) + setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK); + else + clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK); + + /* Read back to flush the write. */ + in_8(&ep8248e_bcsr[8]); +} + +static void ep8248e_set_mdio_dir(struct mdiobb_ctrl *ctrl, int output) +{ + if (output) + clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ); + else + setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ); + + /* Read back to flush the write. */ + in_8(&ep8248e_bcsr[8]); +} + +static void ep8248e_set_mdio_data(struct mdiobb_ctrl *ctrl, int data) +{ + if (data) + setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA); + else + clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA); + + /* Read back to flush the write. */ + in_8(&ep8248e_bcsr[8]); +} + +static int ep8248e_get_mdio_data(struct mdiobb_ctrl *ctrl) +{ + return in_8(&ep8248e_bcsr[8]) & BCSR8_MDIO_DATA; +} + +static const struct mdiobb_ops ep8248e_mdio_ops = { + .set_mdc = ep8248e_set_mdc, + .set_mdio_dir = ep8248e_set_mdio_dir, + .set_mdio_data = ep8248e_set_mdio_data, + .get_mdio_data = ep8248e_get_mdio_data, + .owner = THIS_MODULE, +}; + +static struct mdiobb_ctrl ep8248e_mdio_ctrl = { + .ops = &ep8248e_mdio_ops, +}; + +static int __devinit ep8248e_mdio_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct mii_bus *bus; + struct resource res; + struct device_node *node; + int ret, i; + + node = of_get_parent(ofdev->node); + of_node_put(node); + if (node != ep8248e_bcsr_node) + return -ENODEV; + + ret = of_address_to_resource(ofdev->node, 0, &res); + if (ret) + return ret; + + bus = alloc_mdio_bitbang(&ep8248e_mdio_ctrl); + if (!bus) + return -ENOMEM; + + bus->phy_mask = 0; + bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + + for (i = 0; i < PHY_MAX_ADDR; i++) + bus->irq[i] = -1; + + bus->name = "ep8248e-mdio-bitbang"; + bus->dev = &ofdev->dev; + bus->id = res.start; + + return mdiobus_register(bus); +} + +static int ep8248e_mdio_remove(struct of_device *ofdev) +{ + BUG(); + return 0; +} + +static const struct of_device_id ep8248e_mdio_match[] = { + { + .compatible = "fsl,ep8248e-mdio-bitbang", + }, + {}, +}; + +static struct of_platform_driver ep8248e_mdio_driver = { + .driver = { + .name = "ep8248e-mdio-bitbang", + }, + .match_table = ep8248e_mdio_match, + .probe = ep8248e_mdio_probe, + .remove = ep8248e_mdio_remove, +}; + +struct cpm_pin { + int port, pin, flags; +}; + +static __initdata struct cpm_pin ep8248e_pins[] = { + /* SMC1 */ + {2, 4, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + + /* SCC1 */ + {2, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC1 */ + {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC2 */ + {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* I2C */ + {4, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {4, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + + /* USB */ + {2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ep8248e_pins); i++) { + const struct cpm_pin *pin = &ep8248e_pins[i]; + cpm2_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm2_smc_clk_setup(CPM_CLK_SMC1, CPM_BRG7); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX); /* USB */ + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX); +} + +static void __init ep8248e_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("ep8248e_setup_arch()", 0); + + cpm2_reset(); + + /* When this is set, snooping CPM DMA from RAM causes + * machine checks. See erratum SIU18. + */ + clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_bcr, MPC82XX_BCR_PLDP); + + ep8248e_bcsr_node = + of_find_compatible_node(NULL, NULL, "fsl,ep8248e-bcsr"); + if (!ep8248e_bcsr_node) { + printk(KERN_ERR "No bcsr in device tree\n"); + return; + } + + ep8248e_bcsr = of_iomap(ep8248e_bcsr_node, 0); + if (!ep8248e_bcsr) { + printk(KERN_ERR "Cannot map BCSR registers\n"); + of_node_put(ep8248e_bcsr_node); + ep8248e_bcsr_node = NULL; + return; + } + + setbits8(&ep8248e_bcsr[7], BCSR7_SCC2_ENABLE); + setbits8(&ep8248e_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER | + BCSR8_PHY2_ENABLE | BCSR8_PHY2_POWER); + + init_ioports(); + + if (ppc_md.progress) + ppc_md.progress("ep8248e_setup_arch(), finish", 0); +} + +static __initdata struct of_device_id of_bus_ids[] = { + { .compatible = "simple-bus", }, + { .compatible = "fsl,ep8248e-bcsr", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + of_register_platform_driver(&ep8248e_mdio_driver); + + return 0; +} +machine_device_initcall(ep8248e, declare_of_platform_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init ep8248e_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + return of_flat_dt_is_compatible(root, "fsl,ep8248e"); +} + +define_machine(ep8248e) +{ + .name = "Embedded Planet EP8248E", + .probe = ep8248e_probe, + .setup_arch = ep8248e_setup_arch, + .init_IRQ = ep8248e_pic_init, + .get_irq = cpm2_get_irq, + .calibrate_decr = generic_calibrate_decr, + .restart = pq2_restart, + .progress = udbg_progress, +}; diff --git a/include/asm-powerpc/mpc8260.h b/include/asm-powerpc/mpc8260.h index e0d4807..03317e1 100644 --- a/include/asm-powerpc/mpc8260.h +++ b/include/asm-powerpc/mpc8260.h @@ -8,6 +8,7 @@ #ifndef __ASM_POWERPC_MPC8260_H__ #define __ASM_POWERPC_MPC8260_H__ +#define MPC82XX_BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */ #ifdef CONFIG_8260 -- cgit v0.10.2 From ff5ac76088cd317b6f534cbb774b92b26e508b34 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 17 Jan 2008 16:37:51 -0600 Subject: [POWERPC] 83xx: MPC8313e RBD add NAND to device tree Add NAND to device tree, and call of_platform_bus_probe(). Signed-off-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 6e8c606..396710d 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -45,10 +45,49 @@ reg = <00000000 08000000>; // 128MB at 0 }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus"; + reg = ; + interrupts = ; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0 0 fe000000 00800000 + 1 0 e2800000 00008000 + 2 0 f0000000 00020000 + 3 0 fa000000 00008000>; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8313-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <1 0 2000>; + + u-boot@0 { + reg = <0 100000>; + read-only; + }; + + kernel@100000 { + reg = <100000 300000>; + }; + + fs@400000 { + reg = <400000 1c00000>; + }; + }; + }; + soc8313@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0 e0000000 00100000>; reg = ; bus-frequency = <0>; diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c index 6fb8299..4996b7d 100644 --- a/arch/powerpc/platforms/83xx/mpc8313_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c @@ -14,6 +14,7 @@ */ #include +#include #include #include @@ -75,6 +76,18 @@ static int __init mpc8313_rdb_probe(void) return of_flat_dt_is_compatible(root, "MPC8313ERDB"); } +static struct of_device_id __initdata of_bus_ids[] = { + { .compatible = "simple-bus" }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} +machine_device_initcall(mpc8313_rdb, declare_of_platform_devices); + define_machine(mpc8313_rdb) { .name = "MPC8313 RDB", .probe = mpc8313_rdb_probe, -- cgit v0.10.2 From 12600e48ca8732aa318a533ca7f21034f0010024 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 17 Jan 2008 16:37:56 -0600 Subject: [POWERPC] 83xx: MPC8313e RDB - Add NOR flash to the device tree. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 396710d..9bcf2c9 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -61,6 +61,15 @@ 2 0 f0000000 00020000 3 0 fa000000 00008000>; + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0 800000>; + bank-width = <2>; + device-width = <1>; + }; + nand@1,0 { #address-cells = <1>; #size-cells = <1>; -- cgit v0.10.2 From 5f44668c88dd056a590696787e7203a2ef8a5c83 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 17 Jan 2008 16:38:11 -0600 Subject: [POWERPC] 83xx: Update MPC8313e RDB defconfig for MTD, NAND, JFFS2. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/mpc8313_rdb_defconfig index c9af905..db08e73 100644 --- a/arch/powerpc/configs/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:31 2007 +# Linux kernel version: 2.6.24-rc6 +# Thu Jan 17 16:35:55 2008 # # CONFIG_PPC64 is not set @@ -144,6 +144,7 @@ CONFIG_MPC8313_RDB=y # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC837x_MDS is not set CONFIG_PPC_MPC831x=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -336,15 +337,16 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_PARTITIONS is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y -# CONFIG_MTD_BLKDEVS is not set -# CONFIG_MTD_BLOCK is not set -# CONFIG_MTD_BLOCK_RO is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set @@ -381,11 +383,8 @@ CONFIG_MTD_CFI_UTIL=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xfe000000 -CONFIG_MTD_PHYSMAP_LEN=0x1000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -406,7 +405,16 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # @@ -1178,7 +1186,17 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -1242,6 +1260,8 @@ CONFIG_BITREVERSE=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -- cgit v0.10.2 From de7566bff359bbd7f6a4a37b4b5ce93225067786 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Tue, 22 Jan 2008 12:31:41 -0600 Subject: [POWERPC] 8xx: adder875 - Fix flash bus-width and remove duplicate __initdata Signed-off-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/adder875-redboot.dts b/arch/powerpc/boot/dts/adder875-redboot.dts index 8f7a79f..930bfb3 100644 --- a/arch/powerpc/boot/dts/adder875-redboot.dts +++ b/arch/powerpc/boot/dts/adder875-redboot.dts @@ -62,7 +62,7 @@ flash@0,0 { compatible = "cfi-flash"; reg = <0 0 0x800000>; - bank-width = <4>; + bank-width = <2>; device-width = <2>; }; }; diff --git a/arch/powerpc/boot/dts/adder875-uboot.dts b/arch/powerpc/boot/dts/adder875-uboot.dts index 60d4ad5..0197242 100644 --- a/arch/powerpc/boot/dts/adder875-uboot.dts +++ b/arch/powerpc/boot/dts/adder875-uboot.dts @@ -61,7 +61,7 @@ flash@0,0 { compatible = "cfi-flash"; reg = <0 0 0x800000>; - bank-width = <4>; + bank-width = <2>; device-width = <2>; }; }; diff --git a/arch/powerpc/platforms/8xx/adder875.c b/arch/powerpc/platforms/8xx/adder875.c index af040fd..c6bc078 100644 --- a/arch/powerpc/platforms/8xx/adder875.c +++ b/arch/powerpc/platforms/8xx/adder875.c @@ -92,7 +92,7 @@ static int __init adder875_probe(void) return of_flat_dt_is_compatible(root, "analogue-and-micro,adder875"); } -static __initdata struct of_device_id __initdata of_bus_ids[] = { +static __initdata struct of_device_id of_bus_ids[] = { { .compatible = "simple-bus", }, {}, }; -- cgit v0.10.2 From 0ac247d5690570b825088a5752817eff42488897 Mon Sep 17 00:00:00 2001 From: Wade Farnsworth Date: Tue, 22 Jan 2008 13:13:39 -0700 Subject: [POWERPC] 86xx: Add localbus and flash nodes to mpc8641_hpcn.dts Add local bus, flash, and MTD partition nodes to mpc8641_hpcn.dts Also add compatible field for the soc node, so that it will be picked up by of_platform_bus_probe(). Signed-off-by: Wade Farnsworth Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index a719179..556a9ca 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -60,10 +60,52 @@ reg = <00000000 40000000>; // 1G at 0x0 }; + localbus@f8005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = ; + interrupts = <13 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 ff800000 00800000 + 1 0 fe000000 01000000 + 2 0 f8200000 00100000 + 3 0 f8100000 00100000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 00800000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <00000000 00300000>; + }; + partition@300000 { + label = "firmware b"; + reg = <00300000 00100000>; + read-only; + }; + partition@400000 { + label = "fs"; + reg = <00400000 00300000>; + }; + partition@700000 { + label = "firmware a"; + reg = <00700000 00100000>; + read-only; + }; + }; + }; + soc8641@f8000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <00000000 f8000000 00100000>; reg = ; // CCSRBAR bus-frequency = <0>; -- cgit v0.10.2 From 15061d60a3be0845dc17a0fbe87610d1cc7106c7 Mon Sep 17 00:00:00 2001 From: Wade Farnsworth Date: Tue, 22 Jan 2008 13:17:45 -0700 Subject: [POWERPC] 86xx: MPC8641 HPCN - call of_platform_bus_probe() Call of_platform_bus_probe() on the MPC8641 HPCN, similar to what is done for other platforms. Signed-off-by: Wade Farnsworth Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 14f4e52..cfbe8c5 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -212,6 +213,19 @@ mpc86xx_time_init(void) return 0; } +static __initdata struct of_device_id of_bus_ids[] = { + { .compatible = "simple-bus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(mpc86xx_hpcn, declare_of_platform_devices); + define_machine(mpc86xx_hpcn) { .name = "MPC86xx HPCN", .probe = mpc86xx_hpcn_probe, -- cgit v0.10.2 From 5febf1cd79425d3c65d9a66a2299f0d06dc4b1eb Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 23 Jan 2008 05:53:47 -0600 Subject: [RAPIDIO] Fix compile error and warning drivers/rapidio/rio.c: In function 'rio_get_asm': drivers/rapidio/rio.c:413: error: implicit declaration of function 'in_interrupt' drivers/rapidio/rio.c: In function 'rio_init_mports': drivers/rapidio/rio.c:480: warning: format '%8.8lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' drivers/rapidio/rio.c:480: warning: format '%8.8lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t' Signed-off-by: Kumar Gala diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index f644807..80c5f1b 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "rio.h" @@ -476,8 +477,8 @@ int rio_init_mports(void) port->iores.end - port->iores.start, port->name)) { printk(KERN_ERR - "RIO: Error requesting master port region %8.8lx-%8.8lx\n", - port->iores.start, port->iores.end - 1); + "RIO: Error requesting master port region 0x%016llx-0x%016llx\n", + (u64)port->iores.start, (u64)port->iores.end - 1); rc = -ENOMEM; goto out; } -- cgit v0.10.2 From de3c8d41828553fa4cbba0399826e20a02670663 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 23 Jan 2008 06:12:06 -0600 Subject: [POWERPC] Move RapidIO support code from arch/ppc Do just enough to move the RapidIO support code for 85xx over from arch/ppc into arch/powerpc and make it still build. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index d9b3770..58dbfef 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -70,6 +70,7 @@ pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \ pci-common.o obj-$(CONFIG_PCI_MSI) += msi.o +obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \ machine_kexec_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_AUDIT) += audit.o diff --git a/arch/powerpc/kernel/rio.c b/arch/powerpc/kernel/rio.c new file mode 100644 index 0000000..29487fe --- /dev/null +++ b/arch/powerpc/kernel/rio.c @@ -0,0 +1,52 @@ +/* + * RapidIO PPC32 support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include + +#include + +/** + * platform_rio_init - Do platform specific RIO init + * + * Any platform specific initialization of RapdIO + * hardware is done here as well as registration + * of any active master ports in the system. + */ +void __attribute__ ((weak)) + platform_rio_init(void) +{ + printk(KERN_WARNING "RIO: No platform_rio_init() present\n"); +} + +/** + * ppc_rio_init - Do PPC32 RIO init + * + * Calls platform-specific RIO init code and then calls + * rio_init_mports() to initialize any master ports that + * have been registered with the RIO subsystem. + */ +static int __init ppc_rio_init(void) +{ + printk(KERN_INFO "RIO: RapidIO init\n"); + + /* Platform specific initialization */ + platform_rio_init(); + + /* Enumerate all registered ports */ + rio_init_mports(); + + return 0; +} + +subsys_initcall(ppc_rio_init); diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 66fe39c..f17e7b8 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_FSL_PCI) += fsl_pci.o +obj-$(CONFIG_RAPIDIO) += fsl_rio.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/ diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c new file mode 100644 index 0000000..af2425e --- /dev/null +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -0,0 +1,932 @@ +/* + * MPC85xx RapidIO support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define RIO_REGS_BASE (CCSRBAR + 0xc0000) +#define RIO_ATMU_REGS_OFFSET 0x10c00 +#define RIO_MSG_REGS_OFFSET 0x11000 +#define RIO_MAINT_WIN_SIZE 0x400000 +#define RIO_DBELL_WIN_SIZE 0x1000 + +#define RIO_MSG_OMR_MUI 0x00000002 +#define RIO_MSG_OSR_TE 0x00000080 +#define RIO_MSG_OSR_QOI 0x00000020 +#define RIO_MSG_OSR_QFI 0x00000010 +#define RIO_MSG_OSR_MUB 0x00000004 +#define RIO_MSG_OSR_EOMI 0x00000002 +#define RIO_MSG_OSR_QEI 0x00000001 + +#define RIO_MSG_IMR_MI 0x00000002 +#define RIO_MSG_ISR_TE 0x00000080 +#define RIO_MSG_ISR_QFI 0x00000010 +#define RIO_MSG_ISR_DIQI 0x00000001 + +#define RIO_MSG_DESC_SIZE 32 +#define RIO_MSG_BUFFER_SIZE 4096 +#define RIO_MIN_TX_RING_SIZE 2 +#define RIO_MAX_TX_RING_SIZE 2048 +#define RIO_MIN_RX_RING_SIZE 2 +#define RIO_MAX_RX_RING_SIZE 2048 + +#define DOORBELL_DMR_DI 0x00000002 +#define DOORBELL_DSR_TE 0x00000080 +#define DOORBELL_DSR_QFI 0x00000010 +#define DOORBELL_DSR_DIQI 0x00000001 +#define DOORBELL_TID_OFFSET 0x03 +#define DOORBELL_SID_OFFSET 0x05 +#define DOORBELL_INFO_OFFSET 0x06 + +#define DOORBELL_MESSAGE_SIZE 0x08 +#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET)) +#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET)) +#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET)) + +struct rio_atmu_regs { + u32 rowtar; + u32 pad1; + u32 rowbar; + u32 pad2; + u32 rowar; + u32 pad3[3]; +}; + +struct rio_msg_regs { + u32 omr; + u32 osr; + u32 pad1; + u32 odqdpar; + u32 pad2; + u32 osar; + u32 odpr; + u32 odatr; + u32 odcr; + u32 pad3; + u32 odqepar; + u32 pad4[13]; + u32 imr; + u32 isr; + u32 pad5; + u32 ifqdpar; + u32 pad6; + u32 ifqepar; + u32 pad7[250]; + u32 dmr; + u32 dsr; + u32 pad8; + u32 dqdpar; + u32 pad9; + u32 dqepar; + u32 pad10[26]; + u32 pwmr; + u32 pwsr; + u32 pad11; + u32 pwqbar; +}; + +struct rio_tx_desc { + u32 res1; + u32 saddr; + u32 dport; + u32 dattr; + u32 res2; + u32 res3; + u32 dwcnt; + u32 res4; +}; + +static u32 regs_win; +static struct rio_atmu_regs *atmu_regs; +static struct rio_atmu_regs *maint_atmu_regs; +static struct rio_atmu_regs *dbell_atmu_regs; +static u32 dbell_win; +static u32 maint_win; +static struct rio_msg_regs *msg_regs; + +static struct rio_dbell_ring { + void *virt; + dma_addr_t phys; +} dbell_ring; + +static struct rio_msg_tx_ring { + void *virt; + dma_addr_t phys; + void *virt_buffer[RIO_MAX_TX_RING_SIZE]; + dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE]; + int tx_slot; + int size; + void *dev_id; +} msg_tx_ring; + +static struct rio_msg_rx_ring { + void *virt; + dma_addr_t phys; + void *virt_buffer[RIO_MAX_RX_RING_SIZE]; + int rx_slot; + int size; + void *dev_id; +} msg_rx_ring; + +/** + * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message + * @index: ID of RapidIO interface + * @destid: Destination ID of target device + * @data: 16-bit info field of RapidIO doorbell message + * + * Sends a MPC85xx doorbell message. Returns %0 on success or + * %-EINVAL on failure. + */ +static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data) +{ + pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n", + index, destid, data); + out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22); + out_be16((void *)(dbell_win), data); + + return 0; +} + +/** + * mpc85xx_local_config_read - Generate a MPC85xx local config space read + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be read into + * + * Generates a MPC85xx local configuration space read. Returns %0 on + * success or %-EINVAL on failure. + */ +static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data) +{ + pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index, + offset); + *data = in_be32((void *)(regs_win + offset)); + + return 0; +} + +/** + * mpc85xx_local_config_write - Generate a MPC85xx local config space write + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be written + * + * Generates a MPC85xx local configuration space write. Returns %0 on + * success or %-EINVAL on failure. + */ +static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data) +{ + pr_debug + ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n", + index, offset, data); + out_be32((void *)(regs_win + offset), data); + + return 0; +} + +/** + * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Location to be read into + * + * Generates a MPC85xx read maintenance transaction. Returns %0 on + * success or %-EINVAL on failure. + */ +static int +mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len, + u32 * val) +{ + u8 *data; + + pr_debug + ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n", + index, destid, hopcount, offset, len); + out_be32((void *)&maint_atmu_regs->rowtar, + (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + + data = (u8 *) maint_win + offset; + switch (len) { + case 1: + *val = in_8((u8 *) data); + break; + case 2: + *val = in_be16((u16 *) data); + break; + default: + *val = in_be32((u32 *) data); + break; + } + + return 0; +} + +/** + * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Value to be written + * + * Generates an MPC85xx write maintenance transaction. Returns %0 on + * success or %-EINVAL on failure. + */ +static int +mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset, + int len, u32 val) +{ + u8 *data; + pr_debug + ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", + index, destid, hopcount, offset, len, val); + out_be32((void *)&maint_atmu_regs->rowtar, + (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + + data = (u8 *) maint_win + offset; + switch (len) { + case 1: + out_8((u8 *) data, val); + break; + case 2: + out_be16((u16 *) data, val); + break; + default: + out_be32((u32 *) data, val); + break; + } + + return 0; +} + +/** + * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue + * @mport: Master port with outbound message queue + * @rdev: Target of outbound message + * @mbox: Outbound mailbox + * @buffer: Message to add to outbound queue + * @len: Length of message + * + * Adds the @buffer message to the MPC85xx outbound message queue. Returns + * %0 on success or %-EINVAL on failure. + */ +int +rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, + void *buffer, size_t len) +{ + u32 omr; + struct rio_tx_desc *desc = + (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot; + int ret = 0; + + pr_debug + ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n", + rdev->destid, mbox, (int)buffer, len); + + if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) { + ret = -EINVAL; + goto out; + } + + /* Copy and clear rest of buffer */ + memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len); + if (len < (RIO_MAX_MSG_SIZE - 4)) + memset((void *)((u32) msg_tx_ring. + virt_buffer[msg_tx_ring.tx_slot] + len), 0, + RIO_MAX_MSG_SIZE - len); + + /* Set mbox field for message */ + desc->dport = mbox & 0x3; + + /* Enable EOMI interrupt, set priority, and set destid */ + desc->dattr = 0x28000000 | (rdev->destid << 2); + + /* Set transfer size aligned to next power of 2 (in double words) */ + desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len); + + /* Set snooping and source buffer address */ + desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot]; + + /* Increment enqueue pointer */ + omr = in_be32((void *)&msg_regs->omr); + out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI); + + /* Go to next descriptor */ + if (++msg_tx_ring.tx_slot == msg_tx_ring.size) + msg_tx_ring.tx_slot = 0; + + out: + return ret; +} + +EXPORT_SYMBOL_GPL(rio_hw_add_outb_message); + +/** + * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * + * Handles outbound message interrupts. Executes a register outbound + * mailbox event handler and acks the interrupt occurrence. + */ +static irqreturn_t +mpc85xx_rio_tx_handler(int irq, void *dev_instance) +{ + int osr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + osr = in_be32((void *)&msg_regs->osr); + + if (osr & RIO_MSG_OSR_TE) { + pr_info("RIO: outbound message transmission error\n"); + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE); + goto out; + } + + if (osr & RIO_MSG_OSR_QOI) { + pr_info("RIO: outbound message queue overflow\n"); + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI); + goto out; + } + + if (osr & RIO_MSG_OSR_EOMI) { + u32 dqp = in_be32((void *)&msg_regs->odqdpar); + int slot = (dqp - msg_tx_ring.phys) >> 5; + port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot); + + /* Ack the end-of-message interrupt */ + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI); + } + + out: + return IRQ_HANDLED; +} + +/** + * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox + * @mport: Master port implementing the outbound message unit + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the outbound mailbox ring + * + * Initializes buffer ring, request the outbound message interrupt, + * and enables the outbound message unit. Returns %0 on success and + * %-EINVAL or %-ENOMEM on failure. + */ +int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) +{ + int i, j, rc = 0; + + if ((entries < RIO_MIN_TX_RING_SIZE) || + (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) { + rc = -EINVAL; + goto out; + } + + /* Initialize shadow copy ring */ + msg_tx_ring.dev_id = dev_id; + msg_tx_ring.size = entries; + + for (i = 0; i < msg_tx_ring.size; i++) { + if (! + (msg_tx_ring.virt_buffer[i] = + dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE, + &msg_tx_ring.phys_buffer[i], + GFP_KERNEL))) { + rc = -ENOMEM; + for (j = 0; j < msg_tx_ring.size; j++) + if (msg_tx_ring.virt_buffer[j]) + dma_free_coherent(NULL, + RIO_MSG_BUFFER_SIZE, + msg_tx_ring. + virt_buffer[j], + msg_tx_ring. + phys_buffer[j]); + goto out; + } + } + + /* Initialize outbound message descriptor ring */ + if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL, + msg_tx_ring.size * + RIO_MSG_DESC_SIZE, + &msg_tx_ring.phys, + GFP_KERNEL))) { + rc = -ENOMEM; + goto out_dma; + } + memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE); + msg_tx_ring.tx_slot = 0; + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys); + out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys); + + /* Configure for snooping */ + out_be32((void *)&msg_regs->osar, 0x00000004); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->osr, 0x000000b3); + + /* Hook up outbound message handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0, + "msg_tx", (void *)mport)) < 0) + goto out_irq; + + /* + * Configure outbound message unit + * Snooping + * Interrupts (all enabled, except QEIE) + * Chaining mode + * Disable + */ + out_be32((void *)&msg_regs->omr, 0x00100220); + + /* Set number of entries */ + out_be32((void *)&msg_regs->omr, + in_be32((void *)&msg_regs->omr) | + ((get_bitmask_order(entries) - 2) << 12)); + + /* Now enable the unit */ + out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1); + + out: + return rc; + + out_irq: + dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, + msg_tx_ring.virt, msg_tx_ring.phys); + + out_dma: + for (i = 0; i < msg_tx_ring.size; i++) + dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + msg_tx_ring.virt_buffer[i], + msg_tx_ring.phys_buffer[i]); + + return rc; +} + +/** + * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox + * @mport: Master port implementing the outbound message unit + * @mbox: Mailbox to close + * + * Disables the outbound message unit, free all buffers, and + * frees the outbound message interrupt. + */ +void rio_close_outb_mbox(struct rio_mport *mport, int mbox) +{ + /* Disable inbound message unit */ + out_be32((void *)&msg_regs->omr, 0); + + /* Free ring */ + dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, + msg_tx_ring.virt, msg_tx_ring.phys); + + /* Free interrupt */ + free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport); +} + +/** + * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * + * Handles inbound message interrupts. Executes a registered inbound + * mailbox event handler and acks the interrupt occurrence. + */ +static irqreturn_t +mpc85xx_rio_rx_handler(int irq, void *dev_instance) +{ + int isr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + isr = in_be32((void *)&msg_regs->isr); + + if (isr & RIO_MSG_ISR_TE) { + pr_info("RIO: inbound message reception error\n"); + out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE); + goto out; + } + + /* XXX Need to check/dispatch until queue empty */ + if (isr & RIO_MSG_ISR_DIQI) { + /* + * We implement *only* mailbox 0, but can receive messages + * for any mailbox/letter to that mailbox destination. So, + * make the callback with an unknown/invalid mailbox number + * argument. + */ + port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1); + + /* Ack the queueing interrupt */ + out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI); + } + + out: + return IRQ_HANDLED; +} + +/** + * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox + * @mport: Master port implementing the inbound message unit + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the inbound mailbox ring + * + * Initializes buffer ring, request the inbound message interrupt, + * and enables the inbound message unit. Returns %0 on success + * and %-EINVAL or %-ENOMEM on failure. + */ +int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) +{ + int i, rc = 0; + + if ((entries < RIO_MIN_RX_RING_SIZE) || + (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) { + rc = -EINVAL; + goto out; + } + + /* Initialize client buffer ring */ + msg_rx_ring.dev_id = dev_id; + msg_rx_ring.size = entries; + msg_rx_ring.rx_slot = 0; + for (i = 0; i < msg_rx_ring.size; i++) + msg_rx_ring.virt_buffer[i] = NULL; + + /* Initialize inbound message ring */ + if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL, + msg_rx_ring.size * + RIO_MAX_MSG_SIZE, + &msg_rx_ring.phys, + GFP_KERNEL))) { + rc = -ENOMEM; + goto out; + } + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys); + out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->isr, 0x00000091); + + /* Hook up inbound message handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0, + "msg_rx", (void *)mport)) < 0) { + dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + msg_tx_ring.virt_buffer[i], + msg_tx_ring.phys_buffer[i]); + goto out; + } + + /* + * Configure inbound message unit: + * Snooping + * 4KB max message size + * Unmask all interrupt sources + * Disable + */ + out_be32((void *)&msg_regs->imr, 0x001b0060); + + /* Set number of queue entries */ + out_be32((void *)&msg_regs->imr, + in_be32((void *)&msg_regs->imr) | + ((get_bitmask_order(entries) - 2) << 12)); + + /* Now enable the unit */ + out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1); + + out: + return rc; +} + +/** + * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox + * @mport: Master port implementing the inbound message unit + * @mbox: Mailbox to close + * + * Disables the inbound message unit, free all buffers, and + * frees the inbound message interrupt. + */ +void rio_close_inb_mbox(struct rio_mport *mport, int mbox) +{ + /* Disable inbound message unit */ + out_be32((void *)&msg_regs->imr, 0); + + /* Free ring */ + dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE, + msg_rx_ring.virt, msg_rx_ring.phys); + + /* Free interrupt */ + free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport); +} + +/** + * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue + * @mport: Master port implementing the inbound message unit + * @mbox: Inbound mailbox number + * @buf: Buffer to add to inbound queue + * + * Adds the @buf buffer to the MPC85xx inbound message queue. Returns + * %0 on success or %-EINVAL on failure. + */ +int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) +{ + int rc = 0; + + pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n", + msg_rx_ring.rx_slot); + + if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) { + printk(KERN_ERR + "RIO: error adding inbound buffer %d, buffer exists\n", + msg_rx_ring.rx_slot); + rc = -EINVAL; + goto out; + } + + msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf; + if (++msg_rx_ring.rx_slot == msg_rx_ring.size) + msg_rx_ring.rx_slot = 0; + + out: + return rc; +} + +EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer); + +/** + * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit + * @mport: Master port implementing the inbound message unit + * @mbox: Inbound mailbox number + * + * Gets the next available inbound message from the inbound message queue. + * A pointer to the message is returned on success or NULL on failure. + */ +void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox) +{ + u32 imr; + u32 phys_buf, virt_buf; + void *buf = NULL; + int buf_idx; + + phys_buf = in_be32((void *)&msg_regs->ifqdpar); + + /* If no more messages, then bail out */ + if (phys_buf == in_be32((void *)&msg_regs->ifqepar)) + goto out2; + + virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys); + buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE; + buf = msg_rx_ring.virt_buffer[buf_idx]; + + if (!buf) { + printk(KERN_ERR + "RIO: inbound message copy failed, no buffers\n"); + goto out1; + } + + /* Copy max message size, caller is expected to allocate that big */ + memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE); + + /* Clear the available buffer */ + msg_rx_ring.virt_buffer[buf_idx] = NULL; + + out1: + imr = in_be32((void *)&msg_regs->imr); + out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI); + + out2: + return buf; +} + +EXPORT_SYMBOL_GPL(rio_hw_get_inb_message); + +/** + * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * + * Handles doorbell interrupts. Parses a list of registered + * doorbell event handlers and executes a matching event handler. + */ +static irqreturn_t +mpc85xx_rio_dbell_handler(int irq, void *dev_instance) +{ + int dsr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + dsr = in_be32((void *)&msg_regs->dsr); + + if (dsr & DOORBELL_DSR_TE) { + pr_info("RIO: doorbell reception error\n"); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE); + goto out; + } + + if (dsr & DOORBELL_DSR_QFI) { + pr_info("RIO: doorbell queue full\n"); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI); + goto out; + } + + /* XXX Need to check/dispatch until queue empty */ + if (dsr & DOORBELL_DSR_DIQI) { + u32 dmsg = + (u32) dbell_ring.virt + + (in_be32((void *)&msg_regs->dqdpar) & 0xfff); + u32 dmr; + struct rio_dbell *dbell; + int found = 0; + + pr_debug + ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n", + DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); + + list_for_each_entry(dbell, &port->dbells, node) { + if ((dbell->res->start <= DBELL_INF(dmsg)) && + (dbell->res->end >= DBELL_INF(dmsg))) { + found = 1; + break; + } + } + if (found) { + dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg), + DBELL_INF(dmsg)); + } else { + pr_debug + ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n", + DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); + } + dmr = in_be32((void *)&msg_regs->dmr); + out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI); + } + + out: + return IRQ_HANDLED; +} + +/** + * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init + * @mport: Master port implementing the inbound doorbell unit + * + * Initializes doorbell unit hardware and inbound DMA buffer + * ring. Called from mpc85xx_rio_setup(). Returns %0 on success + * or %-ENOMEM on failure. + */ +static int mpc85xx_rio_doorbell_init(struct rio_mport *mport) +{ + int rc = 0; + + /* Map outbound doorbell window immediately after maintenance window */ + if (!(dbell_win = + (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE, + RIO_DBELL_WIN_SIZE))) { + printk(KERN_ERR + "RIO: unable to map outbound doorbell window\n"); + rc = -ENOMEM; + goto out; + } + + /* Initialize inbound doorbells */ + if (!(dbell_ring.virt = dma_alloc_coherent(NULL, + 512 * DOORBELL_MESSAGE_SIZE, + &dbell_ring.phys, + GFP_KERNEL))) { + printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); + rc = -ENOMEM; + iounmap((void *)dbell_win); + goto out; + } + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys); + out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->dsr, 0x00000091); + + /* Hook up doorbell handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0, + "dbell_rx", (void *)mport) < 0)) { + iounmap((void *)dbell_win); + dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE, + dbell_ring.virt, dbell_ring.phys); + printk(KERN_ERR + "MPC85xx RIO: unable to request inbound doorbell irq"); + goto out; + } + + /* Configure doorbells for snooping, 512 entries, and enable */ + out_be32((void *)&msg_regs->dmr, 0x00108161); + + out: + return rc; +} + +static char *cmdline = NULL; + +static int mpc85xx_rio_get_hdid(int index) +{ + /* XXX Need to parse multiple entries in some format */ + if (!cmdline) + return -1; + + return simple_strtol(cmdline, NULL, 0); +} + +static int mpc85xx_rio_get_cmdline(char *s) +{ + if (!s) + return 0; + + cmdline = s; + return 1; +} + +__setup("riohdid=", mpc85xx_rio_get_cmdline); + +/** + * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface + * @law_start: Starting physical address of RapidIO LAW + * @law_size: Size of RapidIO LAW + * + * Initializes MPC85xx RapidIO hardware interface, configures + * master port with system-specific info, and registers the + * master port with the RapidIO subsystem. + */ +void mpc85xx_rio_setup(int law_start, int law_size) +{ + struct rio_ops *ops; + struct rio_mport *port; + + ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL); + ops->lcread = mpc85xx_local_config_read; + ops->lcwrite = mpc85xx_local_config_write; + ops->cread = mpc85xx_rio_config_read; + ops->cwrite = mpc85xx_rio_config_write; + ops->dsend = mpc85xx_rio_doorbell_send; + + port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL); + port->id = 0; + port->index = 0; + INIT_LIST_HEAD(&port->dbells); + port->iores.start = law_start; + port->iores.end = law_start + law_size; + port->iores.flags = IORESOURCE_MEM; + + rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); + rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0); + rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); + strcpy(port->name, "RIO0 mport"); + + port->ops = ops; + port->host_deviceid = mpc85xx_rio_get_hdid(port->id); + + rio_register_mport(port); + + regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000); + atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET); + maint_atmu_regs = atmu_regs + 1; + dbell_atmu_regs = atmu_regs + 2; + msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET); + + /* Configure maintenance transaction window */ + out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000); + out_be32((void *)&maint_atmu_regs->rowar, 0x80077015); + + maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE); + + /* Configure outbound doorbell window */ + out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400); + out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b); + mpc85xx_rio_doorbell_init(port); +} diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h new file mode 100644 index 0000000..6d3ff30 --- /dev/null +++ b/arch/powerpc/sysdev/fsl_rio.h @@ -0,0 +1,20 @@ +/* + * MPC85xx RapidIO definitions + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PPC_SYSLIB_PPC85XX_RIO_H +#define __PPC_SYSLIB_PPC85XX_RIO_H + +#include + +extern void mpc85xx_rio_setup(int law_start, int law_size); + +#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */ diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 6b4f022..5da0ca7 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -13,7 +13,6 @@ obj-y := entry.o traps.o time.o misc.o \ ppc_htab.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KGDB) += ppc-stub.o obj-$(CONFIG_SMP) += smp.o smp-tbsync.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o diff --git a/arch/ppc/kernel/rio.c b/arch/ppc/kernel/rio.c deleted file mode 100644 index 29487fe..0000000 --- a/arch/ppc/kernel/rio.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * RapidIO PPC32 support - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include - -#include - -/** - * platform_rio_init - Do platform specific RIO init - * - * Any platform specific initialization of RapdIO - * hardware is done here as well as registration - * of any active master ports in the system. - */ -void __attribute__ ((weak)) - platform_rio_init(void) -{ - printk(KERN_WARNING "RIO: No platform_rio_init() present\n"); -} - -/** - * ppc_rio_init - Do PPC32 RIO init - * - * Calls platform-specific RIO init code and then calls - * rio_init_mports() to initialize any master ports that - * have been registered with the RIO subsystem. - */ -static int __init ppc_rio_init(void) -{ - printk(KERN_INFO "RIO: RapidIO init\n"); - - /* Platform specific initialization */ - platform_rio_init(); - - /* Enumerate all registered ports */ - rio_init_mports(); - - return 0; -} - -subsys_initcall(ppc_rio_init); diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c index 674806e..0706dca 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c @@ -42,8 +42,6 @@ #include -#include - #include #ifndef CONFIG_PCI @@ -190,6 +188,7 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) #endif /* CONFIG_PCI */ #ifdef CONFIG_RAPIDIO +extern void mpc85xx_rio_setup(int law_start, int law_size); void platform_rio_init(void) { /* 512MB RIO LAW at 0xc0000000 */ diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c index 731b40e..8748da3 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.c +++ b/arch/ppc/platforms/85xx/stx_gp3.c @@ -54,7 +54,6 @@ #include #include -#include unsigned char __res[sizeof(bd_t)]; @@ -270,6 +269,7 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn) #endif /* CONFIG_PCI */ #ifdef CONFIG_RAPIDIO +extern void mpc85xx_rio_setup(int law_start, int law_size); void platform_rio_init(void) { diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c index 4ee2bd1..2a863a8 100644 --- a/arch/ppc/platforms/85xx/tqm85xx.c +++ b/arch/ppc/platforms/85xx/tqm85xx.c @@ -54,7 +54,6 @@ #include #include #include -#include #ifndef CONFIG_PCI unsigned long isa_io_base = 0; @@ -309,6 +308,7 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn) #endif /* CONFIG_PCI */ #ifdef CONFIG_RAPIDIO +extern void mpc85xx_rio_setup(int law_start, int law_size); void platform_rio_init(void) { /* 512MB RIO LAW at 0xc0000000 */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 543795b..5e16228 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -93,7 +93,6 @@ obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \ ifeq ($(CONFIG_85xx),y) obj-$(CONFIG_PCI) += pci_auto.o endif -obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o obj-$(CONFIG_83xx) += ppc83xx_setup.o ppc_sys.o \ mpc83xx_sys.o mpc83xx_devices.o ipic.o ifeq ($(CONFIG_83xx),y) diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c deleted file mode 100644 index af2425e..0000000 --- a/arch/ppc/syslib/ppc85xx_rio.c +++ /dev/null @@ -1,932 +0,0 @@ -/* - * MPC85xx RapidIO support - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#define RIO_REGS_BASE (CCSRBAR + 0xc0000) -#define RIO_ATMU_REGS_OFFSET 0x10c00 -#define RIO_MSG_REGS_OFFSET 0x11000 -#define RIO_MAINT_WIN_SIZE 0x400000 -#define RIO_DBELL_WIN_SIZE 0x1000 - -#define RIO_MSG_OMR_MUI 0x00000002 -#define RIO_MSG_OSR_TE 0x00000080 -#define RIO_MSG_OSR_QOI 0x00000020 -#define RIO_MSG_OSR_QFI 0x00000010 -#define RIO_MSG_OSR_MUB 0x00000004 -#define RIO_MSG_OSR_EOMI 0x00000002 -#define RIO_MSG_OSR_QEI 0x00000001 - -#define RIO_MSG_IMR_MI 0x00000002 -#define RIO_MSG_ISR_TE 0x00000080 -#define RIO_MSG_ISR_QFI 0x00000010 -#define RIO_MSG_ISR_DIQI 0x00000001 - -#define RIO_MSG_DESC_SIZE 32 -#define RIO_MSG_BUFFER_SIZE 4096 -#define RIO_MIN_TX_RING_SIZE 2 -#define RIO_MAX_TX_RING_SIZE 2048 -#define RIO_MIN_RX_RING_SIZE 2 -#define RIO_MAX_RX_RING_SIZE 2048 - -#define DOORBELL_DMR_DI 0x00000002 -#define DOORBELL_DSR_TE 0x00000080 -#define DOORBELL_DSR_QFI 0x00000010 -#define DOORBELL_DSR_DIQI 0x00000001 -#define DOORBELL_TID_OFFSET 0x03 -#define DOORBELL_SID_OFFSET 0x05 -#define DOORBELL_INFO_OFFSET 0x06 - -#define DOORBELL_MESSAGE_SIZE 0x08 -#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET)) -#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET)) -#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET)) - -struct rio_atmu_regs { - u32 rowtar; - u32 pad1; - u32 rowbar; - u32 pad2; - u32 rowar; - u32 pad3[3]; -}; - -struct rio_msg_regs { - u32 omr; - u32 osr; - u32 pad1; - u32 odqdpar; - u32 pad2; - u32 osar; - u32 odpr; - u32 odatr; - u32 odcr; - u32 pad3; - u32 odqepar; - u32 pad4[13]; - u32 imr; - u32 isr; - u32 pad5; - u32 ifqdpar; - u32 pad6; - u32 ifqepar; - u32 pad7[250]; - u32 dmr; - u32 dsr; - u32 pad8; - u32 dqdpar; - u32 pad9; - u32 dqepar; - u32 pad10[26]; - u32 pwmr; - u32 pwsr; - u32 pad11; - u32 pwqbar; -}; - -struct rio_tx_desc { - u32 res1; - u32 saddr; - u32 dport; - u32 dattr; - u32 res2; - u32 res3; - u32 dwcnt; - u32 res4; -}; - -static u32 regs_win; -static struct rio_atmu_regs *atmu_regs; -static struct rio_atmu_regs *maint_atmu_regs; -static struct rio_atmu_regs *dbell_atmu_regs; -static u32 dbell_win; -static u32 maint_win; -static struct rio_msg_regs *msg_regs; - -static struct rio_dbell_ring { - void *virt; - dma_addr_t phys; -} dbell_ring; - -static struct rio_msg_tx_ring { - void *virt; - dma_addr_t phys; - void *virt_buffer[RIO_MAX_TX_RING_SIZE]; - dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE]; - int tx_slot; - int size; - void *dev_id; -} msg_tx_ring; - -static struct rio_msg_rx_ring { - void *virt; - dma_addr_t phys; - void *virt_buffer[RIO_MAX_RX_RING_SIZE]; - int rx_slot; - int size; - void *dev_id; -} msg_rx_ring; - -/** - * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message - * @index: ID of RapidIO interface - * @destid: Destination ID of target device - * @data: 16-bit info field of RapidIO doorbell message - * - * Sends a MPC85xx doorbell message. Returns %0 on success or - * %-EINVAL on failure. - */ -static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data) -{ - pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n", - index, destid, data); - out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22); - out_be16((void *)(dbell_win), data); - - return 0; -} - -/** - * mpc85xx_local_config_read - Generate a MPC85xx local config space read - * @index: ID of RapdiIO interface - * @offset: Offset into configuration space - * @len: Length (in bytes) of the maintenance transaction - * @data: Value to be read into - * - * Generates a MPC85xx local configuration space read. Returns %0 on - * success or %-EINVAL on failure. - */ -static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data) -{ - pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index, - offset); - *data = in_be32((void *)(regs_win + offset)); - - return 0; -} - -/** - * mpc85xx_local_config_write - Generate a MPC85xx local config space write - * @index: ID of RapdiIO interface - * @offset: Offset into configuration space - * @len: Length (in bytes) of the maintenance transaction - * @data: Value to be written - * - * Generates a MPC85xx local configuration space write. Returns %0 on - * success or %-EINVAL on failure. - */ -static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data) -{ - pr_debug - ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n", - index, offset, data); - out_be32((void *)(regs_win + offset), data); - - return 0; -} - -/** - * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction - * @index: ID of RapdiIO interface - * @destid: Destination ID of transaction - * @hopcount: Number of hops to target device - * @offset: Offset into configuration space - * @len: Length (in bytes) of the maintenance transaction - * @val: Location to be read into - * - * Generates a MPC85xx read maintenance transaction. Returns %0 on - * success or %-EINVAL on failure. - */ -static int -mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len, - u32 * val) -{ - u8 *data; - - pr_debug - ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n", - index, destid, hopcount, offset, len); - out_be32((void *)&maint_atmu_regs->rowtar, - (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); - - data = (u8 *) maint_win + offset; - switch (len) { - case 1: - *val = in_8((u8 *) data); - break; - case 2: - *val = in_be16((u16 *) data); - break; - default: - *val = in_be32((u32 *) data); - break; - } - - return 0; -} - -/** - * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction - * @index: ID of RapdiIO interface - * @destid: Destination ID of transaction - * @hopcount: Number of hops to target device - * @offset: Offset into configuration space - * @len: Length (in bytes) of the maintenance transaction - * @val: Value to be written - * - * Generates an MPC85xx write maintenance transaction. Returns %0 on - * success or %-EINVAL on failure. - */ -static int -mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset, - int len, u32 val) -{ - u8 *data; - pr_debug - ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", - index, destid, hopcount, offset, len, val); - out_be32((void *)&maint_atmu_regs->rowtar, - (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); - - data = (u8 *) maint_win + offset; - switch (len) { - case 1: - out_8((u8 *) data, val); - break; - case 2: - out_be16((u16 *) data, val); - break; - default: - out_be32((u32 *) data, val); - break; - } - - return 0; -} - -/** - * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue - * @mport: Master port with outbound message queue - * @rdev: Target of outbound message - * @mbox: Outbound mailbox - * @buffer: Message to add to outbound queue - * @len: Length of message - * - * Adds the @buffer message to the MPC85xx outbound message queue. Returns - * %0 on success or %-EINVAL on failure. - */ -int -rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, - void *buffer, size_t len) -{ - u32 omr; - struct rio_tx_desc *desc = - (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot; - int ret = 0; - - pr_debug - ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n", - rdev->destid, mbox, (int)buffer, len); - - if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) { - ret = -EINVAL; - goto out; - } - - /* Copy and clear rest of buffer */ - memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len); - if (len < (RIO_MAX_MSG_SIZE - 4)) - memset((void *)((u32) msg_tx_ring. - virt_buffer[msg_tx_ring.tx_slot] + len), 0, - RIO_MAX_MSG_SIZE - len); - - /* Set mbox field for message */ - desc->dport = mbox & 0x3; - - /* Enable EOMI interrupt, set priority, and set destid */ - desc->dattr = 0x28000000 | (rdev->destid << 2); - - /* Set transfer size aligned to next power of 2 (in double words) */ - desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len); - - /* Set snooping and source buffer address */ - desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot]; - - /* Increment enqueue pointer */ - omr = in_be32((void *)&msg_regs->omr); - out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI); - - /* Go to next descriptor */ - if (++msg_tx_ring.tx_slot == msg_tx_ring.size) - msg_tx_ring.tx_slot = 0; - - out: - return ret; -} - -EXPORT_SYMBOL_GPL(rio_hw_add_outb_message); - -/** - * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler - * @irq: Linux interrupt number - * @dev_instance: Pointer to interrupt-specific data - * - * Handles outbound message interrupts. Executes a register outbound - * mailbox event handler and acks the interrupt occurrence. - */ -static irqreturn_t -mpc85xx_rio_tx_handler(int irq, void *dev_instance) -{ - int osr; - struct rio_mport *port = (struct rio_mport *)dev_instance; - - osr = in_be32((void *)&msg_regs->osr); - - if (osr & RIO_MSG_OSR_TE) { - pr_info("RIO: outbound message transmission error\n"); - out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE); - goto out; - } - - if (osr & RIO_MSG_OSR_QOI) { - pr_info("RIO: outbound message queue overflow\n"); - out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI); - goto out; - } - - if (osr & RIO_MSG_OSR_EOMI) { - u32 dqp = in_be32((void *)&msg_regs->odqdpar); - int slot = (dqp - msg_tx_ring.phys) >> 5; - port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot); - - /* Ack the end-of-message interrupt */ - out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI); - } - - out: - return IRQ_HANDLED; -} - -/** - * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox - * @mport: Master port implementing the outbound message unit - * @dev_id: Device specific pointer to pass on event - * @mbox: Mailbox to open - * @entries: Number of entries in the outbound mailbox ring - * - * Initializes buffer ring, request the outbound message interrupt, - * and enables the outbound message unit. Returns %0 on success and - * %-EINVAL or %-ENOMEM on failure. - */ -int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) -{ - int i, j, rc = 0; - - if ((entries < RIO_MIN_TX_RING_SIZE) || - (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) { - rc = -EINVAL; - goto out; - } - - /* Initialize shadow copy ring */ - msg_tx_ring.dev_id = dev_id; - msg_tx_ring.size = entries; - - for (i = 0; i < msg_tx_ring.size; i++) { - if (! - (msg_tx_ring.virt_buffer[i] = - dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE, - &msg_tx_ring.phys_buffer[i], - GFP_KERNEL))) { - rc = -ENOMEM; - for (j = 0; j < msg_tx_ring.size; j++) - if (msg_tx_ring.virt_buffer[j]) - dma_free_coherent(NULL, - RIO_MSG_BUFFER_SIZE, - msg_tx_ring. - virt_buffer[j], - msg_tx_ring. - phys_buffer[j]); - goto out; - } - } - - /* Initialize outbound message descriptor ring */ - if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL, - msg_tx_ring.size * - RIO_MSG_DESC_SIZE, - &msg_tx_ring.phys, - GFP_KERNEL))) { - rc = -ENOMEM; - goto out_dma; - } - memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE); - msg_tx_ring.tx_slot = 0; - - /* Point dequeue/enqueue pointers at first entry in ring */ - out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys); - out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys); - - /* Configure for snooping */ - out_be32((void *)&msg_regs->osar, 0x00000004); - - /* Clear interrupt status */ - out_be32((void *)&msg_regs->osr, 0x000000b3); - - /* Hook up outbound message handler */ - if ((rc = - request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0, - "msg_tx", (void *)mport)) < 0) - goto out_irq; - - /* - * Configure outbound message unit - * Snooping - * Interrupts (all enabled, except QEIE) - * Chaining mode - * Disable - */ - out_be32((void *)&msg_regs->omr, 0x00100220); - - /* Set number of entries */ - out_be32((void *)&msg_regs->omr, - in_be32((void *)&msg_regs->omr) | - ((get_bitmask_order(entries) - 2) << 12)); - - /* Now enable the unit */ - out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1); - - out: - return rc; - - out_irq: - dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, - msg_tx_ring.virt, msg_tx_ring.phys); - - out_dma: - for (i = 0; i < msg_tx_ring.size; i++) - dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, - msg_tx_ring.virt_buffer[i], - msg_tx_ring.phys_buffer[i]); - - return rc; -} - -/** - * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox - * @mport: Master port implementing the outbound message unit - * @mbox: Mailbox to close - * - * Disables the outbound message unit, free all buffers, and - * frees the outbound message interrupt. - */ -void rio_close_outb_mbox(struct rio_mport *mport, int mbox) -{ - /* Disable inbound message unit */ - out_be32((void *)&msg_regs->omr, 0); - - /* Free ring */ - dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, - msg_tx_ring.virt, msg_tx_ring.phys); - - /* Free interrupt */ - free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport); -} - -/** - * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler - * @irq: Linux interrupt number - * @dev_instance: Pointer to interrupt-specific data - * - * Handles inbound message interrupts. Executes a registered inbound - * mailbox event handler and acks the interrupt occurrence. - */ -static irqreturn_t -mpc85xx_rio_rx_handler(int irq, void *dev_instance) -{ - int isr; - struct rio_mport *port = (struct rio_mport *)dev_instance; - - isr = in_be32((void *)&msg_regs->isr); - - if (isr & RIO_MSG_ISR_TE) { - pr_info("RIO: inbound message reception error\n"); - out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE); - goto out; - } - - /* XXX Need to check/dispatch until queue empty */ - if (isr & RIO_MSG_ISR_DIQI) { - /* - * We implement *only* mailbox 0, but can receive messages - * for any mailbox/letter to that mailbox destination. So, - * make the callback with an unknown/invalid mailbox number - * argument. - */ - port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1); - - /* Ack the queueing interrupt */ - out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI); - } - - out: - return IRQ_HANDLED; -} - -/** - * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox - * @mport: Master port implementing the inbound message unit - * @dev_id: Device specific pointer to pass on event - * @mbox: Mailbox to open - * @entries: Number of entries in the inbound mailbox ring - * - * Initializes buffer ring, request the inbound message interrupt, - * and enables the inbound message unit. Returns %0 on success - * and %-EINVAL or %-ENOMEM on failure. - */ -int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) -{ - int i, rc = 0; - - if ((entries < RIO_MIN_RX_RING_SIZE) || - (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) { - rc = -EINVAL; - goto out; - } - - /* Initialize client buffer ring */ - msg_rx_ring.dev_id = dev_id; - msg_rx_ring.size = entries; - msg_rx_ring.rx_slot = 0; - for (i = 0; i < msg_rx_ring.size; i++) - msg_rx_ring.virt_buffer[i] = NULL; - - /* Initialize inbound message ring */ - if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL, - msg_rx_ring.size * - RIO_MAX_MSG_SIZE, - &msg_rx_ring.phys, - GFP_KERNEL))) { - rc = -ENOMEM; - goto out; - } - - /* Point dequeue/enqueue pointers at first entry in ring */ - out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys); - out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys); - - /* Clear interrupt status */ - out_be32((void *)&msg_regs->isr, 0x00000091); - - /* Hook up inbound message handler */ - if ((rc = - request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0, - "msg_rx", (void *)mport)) < 0) { - dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, - msg_tx_ring.virt_buffer[i], - msg_tx_ring.phys_buffer[i]); - goto out; - } - - /* - * Configure inbound message unit: - * Snooping - * 4KB max message size - * Unmask all interrupt sources - * Disable - */ - out_be32((void *)&msg_regs->imr, 0x001b0060); - - /* Set number of queue entries */ - out_be32((void *)&msg_regs->imr, - in_be32((void *)&msg_regs->imr) | - ((get_bitmask_order(entries) - 2) << 12)); - - /* Now enable the unit */ - out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1); - - out: - return rc; -} - -/** - * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox - * @mport: Master port implementing the inbound message unit - * @mbox: Mailbox to close - * - * Disables the inbound message unit, free all buffers, and - * frees the inbound message interrupt. - */ -void rio_close_inb_mbox(struct rio_mport *mport, int mbox) -{ - /* Disable inbound message unit */ - out_be32((void *)&msg_regs->imr, 0); - - /* Free ring */ - dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE, - msg_rx_ring.virt, msg_rx_ring.phys); - - /* Free interrupt */ - free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport); -} - -/** - * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue - * @mport: Master port implementing the inbound message unit - * @mbox: Inbound mailbox number - * @buf: Buffer to add to inbound queue - * - * Adds the @buf buffer to the MPC85xx inbound message queue. Returns - * %0 on success or %-EINVAL on failure. - */ -int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) -{ - int rc = 0; - - pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n", - msg_rx_ring.rx_slot); - - if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) { - printk(KERN_ERR - "RIO: error adding inbound buffer %d, buffer exists\n", - msg_rx_ring.rx_slot); - rc = -EINVAL; - goto out; - } - - msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf; - if (++msg_rx_ring.rx_slot == msg_rx_ring.size) - msg_rx_ring.rx_slot = 0; - - out: - return rc; -} - -EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer); - -/** - * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit - * @mport: Master port implementing the inbound message unit - * @mbox: Inbound mailbox number - * - * Gets the next available inbound message from the inbound message queue. - * A pointer to the message is returned on success or NULL on failure. - */ -void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox) -{ - u32 imr; - u32 phys_buf, virt_buf; - void *buf = NULL; - int buf_idx; - - phys_buf = in_be32((void *)&msg_regs->ifqdpar); - - /* If no more messages, then bail out */ - if (phys_buf == in_be32((void *)&msg_regs->ifqepar)) - goto out2; - - virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys); - buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE; - buf = msg_rx_ring.virt_buffer[buf_idx]; - - if (!buf) { - printk(KERN_ERR - "RIO: inbound message copy failed, no buffers\n"); - goto out1; - } - - /* Copy max message size, caller is expected to allocate that big */ - memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE); - - /* Clear the available buffer */ - msg_rx_ring.virt_buffer[buf_idx] = NULL; - - out1: - imr = in_be32((void *)&msg_regs->imr); - out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI); - - out2: - return buf; -} - -EXPORT_SYMBOL_GPL(rio_hw_get_inb_message); - -/** - * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler - * @irq: Linux interrupt number - * @dev_instance: Pointer to interrupt-specific data - * - * Handles doorbell interrupts. Parses a list of registered - * doorbell event handlers and executes a matching event handler. - */ -static irqreturn_t -mpc85xx_rio_dbell_handler(int irq, void *dev_instance) -{ - int dsr; - struct rio_mport *port = (struct rio_mport *)dev_instance; - - dsr = in_be32((void *)&msg_regs->dsr); - - if (dsr & DOORBELL_DSR_TE) { - pr_info("RIO: doorbell reception error\n"); - out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE); - goto out; - } - - if (dsr & DOORBELL_DSR_QFI) { - pr_info("RIO: doorbell queue full\n"); - out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI); - goto out; - } - - /* XXX Need to check/dispatch until queue empty */ - if (dsr & DOORBELL_DSR_DIQI) { - u32 dmsg = - (u32) dbell_ring.virt + - (in_be32((void *)&msg_regs->dqdpar) & 0xfff); - u32 dmr; - struct rio_dbell *dbell; - int found = 0; - - pr_debug - ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n", - DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); - - list_for_each_entry(dbell, &port->dbells, node) { - if ((dbell->res->start <= DBELL_INF(dmsg)) && - (dbell->res->end >= DBELL_INF(dmsg))) { - found = 1; - break; - } - } - if (found) { - dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg), - DBELL_INF(dmsg)); - } else { - pr_debug - ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n", - DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); - } - dmr = in_be32((void *)&msg_regs->dmr); - out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI); - out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI); - } - - out: - return IRQ_HANDLED; -} - -/** - * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init - * @mport: Master port implementing the inbound doorbell unit - * - * Initializes doorbell unit hardware and inbound DMA buffer - * ring. Called from mpc85xx_rio_setup(). Returns %0 on success - * or %-ENOMEM on failure. - */ -static int mpc85xx_rio_doorbell_init(struct rio_mport *mport) -{ - int rc = 0; - - /* Map outbound doorbell window immediately after maintenance window */ - if (!(dbell_win = - (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE, - RIO_DBELL_WIN_SIZE))) { - printk(KERN_ERR - "RIO: unable to map outbound doorbell window\n"); - rc = -ENOMEM; - goto out; - } - - /* Initialize inbound doorbells */ - if (!(dbell_ring.virt = dma_alloc_coherent(NULL, - 512 * DOORBELL_MESSAGE_SIZE, - &dbell_ring.phys, - GFP_KERNEL))) { - printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); - rc = -ENOMEM; - iounmap((void *)dbell_win); - goto out; - } - - /* Point dequeue/enqueue pointers at first entry in ring */ - out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys); - out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys); - - /* Clear interrupt status */ - out_be32((void *)&msg_regs->dsr, 0x00000091); - - /* Hook up doorbell handler */ - if ((rc = - request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0, - "dbell_rx", (void *)mport) < 0)) { - iounmap((void *)dbell_win); - dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE, - dbell_ring.virt, dbell_ring.phys); - printk(KERN_ERR - "MPC85xx RIO: unable to request inbound doorbell irq"); - goto out; - } - - /* Configure doorbells for snooping, 512 entries, and enable */ - out_be32((void *)&msg_regs->dmr, 0x00108161); - - out: - return rc; -} - -static char *cmdline = NULL; - -static int mpc85xx_rio_get_hdid(int index) -{ - /* XXX Need to parse multiple entries in some format */ - if (!cmdline) - return -1; - - return simple_strtol(cmdline, NULL, 0); -} - -static int mpc85xx_rio_get_cmdline(char *s) -{ - if (!s) - return 0; - - cmdline = s; - return 1; -} - -__setup("riohdid=", mpc85xx_rio_get_cmdline); - -/** - * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface - * @law_start: Starting physical address of RapidIO LAW - * @law_size: Size of RapidIO LAW - * - * Initializes MPC85xx RapidIO hardware interface, configures - * master port with system-specific info, and registers the - * master port with the RapidIO subsystem. - */ -void mpc85xx_rio_setup(int law_start, int law_size) -{ - struct rio_ops *ops; - struct rio_mport *port; - - ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL); - ops->lcread = mpc85xx_local_config_read; - ops->lcwrite = mpc85xx_local_config_write; - ops->cread = mpc85xx_rio_config_read; - ops->cwrite = mpc85xx_rio_config_write; - ops->dsend = mpc85xx_rio_doorbell_send; - - port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL); - port->id = 0; - port->index = 0; - INIT_LIST_HEAD(&port->dbells); - port->iores.start = law_start; - port->iores.end = law_start + law_size; - port->iores.flags = IORESOURCE_MEM; - - rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); - rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0); - rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); - strcpy(port->name, "RIO0 mport"); - - port->ops = ops; - port->host_deviceid = mpc85xx_rio_get_hdid(port->id); - - rio_register_mport(port); - - regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000); - atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET); - maint_atmu_regs = atmu_regs + 1; - dbell_atmu_regs = atmu_regs + 2; - msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET); - - /* Configure maintenance transaction window */ - out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000); - out_be32((void *)&maint_atmu_regs->rowar, 0x80077015); - - maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE); - - /* Configure outbound doorbell window */ - out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400); - out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b); - mpc85xx_rio_doorbell_init(port); -} diff --git a/arch/ppc/syslib/ppc85xx_rio.h b/arch/ppc/syslib/ppc85xx_rio.h deleted file mode 100644 index 6d3ff30..0000000 --- a/arch/ppc/syslib/ppc85xx_rio.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * MPC85xx RapidIO definitions - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PPC_SYSLIB_PPC85XX_RIO_H -#define __PPC_SYSLIB_PPC85XX_RIO_H - -#include - -extern void mpc85xx_rio_setup(int law_start, int law_size); - -#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */ -- cgit v0.10.2 From 1dd4561e7d9b907afd10709f9ff092861e8ab095 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 23 Jan 2008 06:36:40 -0600 Subject: [POWERPC] Fix compile error if CONFIG_STX_GP3 is defined cpmux is need in all cases, having wrapped by the ifndef CONFIG_STX_GP3 was causing a compile error. Signed-off-by: Kumar Gala diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index def0158..d9af06a 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -165,9 +165,9 @@ void scc2_lineif(struct uart_cpm_port *pinfo) * really has to get out of the driver so boards can * be supported in a sane fashion. */ + volatile cpmux_t *cpmux = cpm2_map(im_cpmux); #ifndef CONFIG_STX_GP3 volatile iop_cpm2_t *io = cpm2_map(im_ioport); - volatile cpmux_t *cpmux = cpm2_map(im_cpmux); io->iop_pparb |= 0x008b0000; io->iop_pdirb |= 0x00880000; -- cgit v0.10.2 From 6869e4ad4bd17e7699e58bed6464738e8677c392 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 21 Jan 2008 11:58:06 -0700 Subject: [POWERPC] 8xx: Use machine_*_initcall() hooks in platform code Signed-off-by: Grant Likely Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/8xx/ep88xc.c b/arch/powerpc/platforms/8xx/ep88xc.c index c518b6c..88afa35 100644 --- a/arch/powerpc/platforms/8xx/ep88xc.c +++ b/arch/powerpc/platforms/8xx/ep88xc.c @@ -155,12 +155,11 @@ static struct of_device_id __initdata of_bus_ids[] = { static int __init declare_of_platform_devices(void) { /* Publish the QE devices */ - if (machine_is(ep88xc)) - of_platform_bus_probe(NULL, of_bus_ids, NULL); + of_platform_bus_probe(NULL, of_bus_ids, NULL); return 0; } -device_initcall(declare_of_platform_devices); +machine_device_initcall(ep88xc, declare_of_platform_devices); define_machine(ep88xc) { .name = "Embedded Planet EP88xC", diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c index d2927a4..d7965f8 100644 --- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c @@ -128,12 +128,11 @@ static struct of_device_id __initdata of_bus_ids[] = { static int __init declare_of_platform_devices(void) { - if (machine_is(mpc86x_ads)) - of_platform_bus_probe(NULL, of_bus_ids, NULL); + of_platform_bus_probe(NULL, of_bus_ids, NULL); return 0; } -device_initcall(declare_of_platform_devices); +machine_device_initcall(mpc86x_ads, declare_of_platform_devices); define_machine(mpc86x_ads) { .name = "MPC86x ADS", diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c index 2cf1b6a..6ef8e9e 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c @@ -264,12 +264,11 @@ static struct of_device_id __initdata of_bus_ids[] = { static int __init declare_of_platform_devices(void) { /* Publish the QE devices */ - if (machine_is(mpc885_ads)) - of_platform_bus_probe(NULL, of_bus_ids, NULL); + of_platform_bus_probe(NULL, of_bus_ids, NULL); return 0; } -device_initcall(declare_of_platform_devices); +machine_device_initcall(mpc885_ads, declare_of_platform_devices); define_machine(mpc885_ads) { .name = "Freescale MPC885 ADS", -- cgit v0.10.2 From 70f782e14870435aa37b91e1ea0a189a78eb0fa9 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Tue, 18 Dec 2007 16:25:43 +0100 Subject: fs_enet: Add fixed-phy support for fs_enet This patch adds support to use the fixed-link property of an ethernet node to fs_enet for the CONFIG_PPC_CPM_NEW_BINDING case. Signed-off-by: Jochen Friedrich Acked-by: Jeff Garzik Acked-by: Vitali Bordug Signed-off-by: Kumar Gala diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index f2a4d39..8220c70 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -1174,8 +1174,15 @@ static int __devinit find_phy(struct device_node *np, struct device_node *phynode, *mdionode; struct resource res; int ret = 0, len; + const u32 *data; + + data = of_get_property(np, "fixed-link", NULL); + if (data) { + snprintf(fpi->bus_id, 16, PHY_ID_FMT, 0, *data); + return 0; + } - const u32 *data = of_get_property(np, "phy-handle", &len); + data = of_get_property(np, "phy-handle", &len); if (!data || len != 4) return -EINVAL; -- cgit v0.10.2 From 1d59483aecb5bc80bdd677a46e77515a733c1a6f Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 23 Jan 2008 12:42:07 -0600 Subject: [POWERPC] Add _nmask_and_or_msr() declartion to asm-powerpc/system.h Prevents miscellaneous users from declaring it locally. Signed-off-by: Jon Loeliger Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index a2c04b9..d4f8bf5 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -53,8 +53,6 @@ #define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000 -extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); - int mpc7448_hpc2_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) { diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 87be8c3..bc9739d 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -169,6 +169,8 @@ extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long); extern void bad_page_fault(struct pt_regs *, unsigned long, int); extern int die(const char *, struct pt_regs *, long); extern void _exception(int, struct pt_regs *, int, unsigned long); +extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); + #ifdef CONFIG_BOOKE_WDT extern u32 booke_wdt_enabled; extern u32 booke_wdt_period; -- cgit v0.10.2 From b164b9032e5210dfc94b564344d61995785c9bd7 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 23 Jan 2008 12:42:29 -0600 Subject: [POWERPC] Add StorCenter DTS first draft. Based on the Kurobox DTS files. Signed-off-by: Jon Loeliger Acked-by: Andy Wilcox Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts new file mode 100644 index 0000000..6aa1d69 --- /dev/null +++ b/arch/powerpc/boot/dts/storcenter.dts @@ -0,0 +1,138 @@ +/* + * Device Tree Source for IOMEGA StorCenter + * + * Copyright 2007 Oyvind Repvik + * Copyright 2007 Jon Loeliger + * + * Based on the Kurobox DTS by G. Liakhovetski + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/ { + model = "StorCenter"; + compatible = "storcenter"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8241@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = ; /* Hz */ + timebase-frequency = ; /* Hz */ + bus-frequency = <0>; /* from bootwrapper */ + i-cache-line-size = ; /* bytes */ + d-cache-line-size = ; /* bytes */ + i-cache-size = <4000>; + d-cache-size = <4000>; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 04000000>; /* 64MB @ 0x0 */ + }; + + soc@fc000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8241", "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + ranges = <0 fc000000 100000>; + reg = ; /* EUMB */ + bus-frequency = <0>; /* fixed by loader */ + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <5 2>; + interrupt-parent = <&mpic>; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <68>; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 20>; + clock-frequency = ; /* Hz */ + current-speed = ; + interrupts = <9 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 20>; + clock-frequency = ; /* Hz */ + current-speed = ; + interrupts = ; + interrupt-parent = <&mpic>; + }; + + mpic: interrupt-controller@40000 { + #interrupt-cells = <2>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <40000 40000>; + }; + + }; + + pci0: pci@fe800000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = ; + ranges = <01000000 0 0 fe000000 0 00c00000 + 02000000 0 80000000 80000000 0 70000000>; + bus-range = <0 ff>; + clock-frequency = ; /* Hz */ + interrupt-parent = <&mpic>; + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 13 - IDE */ + 6800 0 0 1 &mpic 0 1 + 6800 0 0 2 &mpic 0 1 + 6800 0 0 3 &mpic 0 1 + /* IDSEL 14 - USB */ + 7000 0 0 1 &mpic 0 1 + 7000 0 0 2 &mpic 0 1 + 7000 0 0 3 &mpic 0 1 + 7000 0 0 4 &mpic 0 1 + /* IDSEL 15 - ETH */ + 7800 0 0 1 &mpic 0 1 + 7800 0 0 2 &mpic 0 1 + 7800 0 0 3 &mpic 0 1 + 7800 0 0 4 &mpic 0 1 + >; + }; + + chosen { + linux,stdout-path = "/soc/serial@4500"; + }; +}; -- cgit v0.10.2 From 3490cba56f7f8a78ef4c94814c3181f09ce1e2ef Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 23 Jan 2008 12:42:50 -0600 Subject: [POWERPC] Add initial iomega StorCenter board port. Use cuImage bootwrapper until U-Boot port is completed. Derived heavily from Linkstation port. Signed-off-by: Jon Loeliger Acked-by: Andy Wilcox Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index fcca455..1e20aca 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -57,7 +57,7 @@ src-wlib := string.S crt0.S stdio.c main.c \ 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \ cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \ fsl-soc.c mpc8xx.c pq2.c -src-plat := of.c cuboot-52xx.c cuboot-83xx.c cuboot-85xx.c holly.c \ +src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \ cuboot-ebony.c treeboot-ebony.c prpmc2800.c \ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \ @@ -197,6 +197,7 @@ image-$(CONFIG_EP405) += zImage.ep405 image-$(CONFIG_8260) += cuImage.pq2 image-$(CONFIG_EP8248E) += zImage.ep8248e image-$(CONFIG_PPC_MPC52xx) += cuImage.52xx +image-$(CONFIG_STORCENTER) += cuImage.824x image-$(CONFIG_PPC_83xx) += cuImage.83xx image-$(CONFIG_PPC_85xx) += cuImage.85xx image-$(CONFIG_MPC7448HPC2) += cuImage.hpc2 diff --git a/arch/powerpc/boot/cuboot-824x.c b/arch/powerpc/boot/cuboot-824x.c new file mode 100644 index 0000000..ced90c5 --- /dev/null +++ b/arch/powerpc/boot/cuboot-824x.c @@ -0,0 +1,53 @@ +/* + * Old U-boot compatibility for 824x + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#define TARGET_824x +#include "ppcboot.h" + +static bd_t bd; + + +static void platform_fixups(void) +{ + void *soc; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); + + soc = find_node_by_devtype(NULL, "soc"); + if (soc) { + void *serial = NULL; + + setprop(soc, "bus-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + + while ((serial = find_node_by_devtype(serial, "serial"))) { + if (get_parent(serial) != soc) + continue; + + setprop(serial, "clock-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + } + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 8924095..6c80837 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -9,6 +9,8 @@ config LINKSTATION select FSL_SOC select PPC_UDBG_16550 if SERIAL_8250 select DEFAULT_UIMAGE + select MPC10X_OPENPIC + select MPC10X_BRIDGE help Select LINKSTATION if configuring for one of PPC- (MPC8241) based NAS systems from Buffalo Technology. So far only @@ -16,6 +18,19 @@ config LINKSTATION Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based Terastation systems should be supported too. +config STORCENTER + bool "IOMEGA StorCenter" + depends on EMBEDDED6xx + select MPIC + select FSL_SOC + select PPC_UDBG_16550 if SERIAL_8250 + select WANT_DEVICE_TREE + select MPC10X_OPENPIC + select MPC10X_BRIDGE + help + Select STORCENTER if configuring for the iomega StorCenter + with an 8241 CPU in it. + config MPC7448HPC2 bool "Freescale MPC7448HPC2(Taiga)" depends on EMBEDDED6xx @@ -23,6 +38,7 @@ config MPC7448HPC2 select DEFAULT_UIMAGE select PPC_UDBG_16550 select WANT_DEVICE_TREE + select TSI108_BRIDGE help Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga) platform @@ -33,6 +49,7 @@ config PPC_HOLLY select TSI108_BRIDGE select PPC_UDBG_16550 select WANT_DEVICE_TREE + select TSI108_BRIDGE help Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval Board with TSI108/9 bridge (Hickory/Holly) @@ -48,17 +65,13 @@ config PPC_PRPMC2800 config TSI108_BRIDGE bool - depends on MPC7448HPC2 || PPC_HOLLY select PCI select MPIC select MPIC_WEIRD - default y config MPC10X_BRIDGE bool - depends on LINKSTATION select PPC_INDIRECT_PCI - default y config MV64X60 bool @@ -67,8 +80,6 @@ config MV64X60 config MPC10X_OPENPIC bool - depends on LINKSTATION - default y config MPC10X_STORE_GATHERING bool "Enable MPC10x store gathering" diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile index 844947c..06524d3 100644 --- a/arch/powerpc/platforms/embedded6xx/Makefile +++ b/arch/powerpc/platforms/embedded6xx/Makefile @@ -3,5 +3,6 @@ # obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o +obj-$(CONFIG_STORCENTER) += storcenter.o obj-$(CONFIG_PPC_HOLLY) += holly.o obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c new file mode 100644 index 0000000..e12e9d2 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/storcenter.c @@ -0,0 +1,192 @@ +/* + * Board setup routines for the storcenter + * + * Copyright 2007 (C) Oyvind Repvik (nail@nslu2-linux.org) + * Copyright 2007 Andy Wilcox, Jon Loeliger + * + * Based on linkstation.c by G. Liakhovetski + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of + * any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "mpc10x.h" + + +#ifdef CONFIG_MTD_PHYSMAP +static struct mtd_partition storcenter_physmap_partitions[] = { + { + .name = "kernel", + .offset = 0x000000, + .size = 0x170000, + }, + { + .name = "rootfs", + .offset = 0x170000, + .size = 0x590000, + }, + { + .name = "uboot", + .offset = 0x700000, + .size = 0x040000, + }, + { + .name = "config", + .offset = 0x740000, + .size = 0x0c0000, + }, +}; +#endif + + +static __initdata struct of_device_id storcenter_of_bus[] = { + { .name = "soc", }, + {}, +}; + +static int __init storcenter_device_probe(void) +{ + of_platform_bus_probe(NULL, storcenter_of_bus, NULL); + return 0; +} +machine_device_initcall(storcenter, storcenter_device_probe); + + +static int __init storcenter_add_bridge(struct device_node *dev) +{ +#ifdef CONFIG_PCI + int len; + struct pci_controller *hose; + const int *bus_range; + + printk("Adding PCI host bridge %s\n", dev->full_name); + + hose = pcibios_alloc_controller(dev); + if (hose == NULL) + return -ENOMEM; + + bus_range = of_get_property(dev, "bus-range", &len); + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + setup_indirect_pci(hose, MPC10X_MAPB_CNFG_ADDR, MPC10X_MAPB_CNFG_DATA, 0); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, 1); +#endif + + return 0; +} + +static void __init storcenter_setup_arch(void) +{ + struct device_node *np; + +#ifdef CONFIG_MTD_PHYSMAP + physmap_set_partitions(storcenter_physmap_partitions, + ARRAY_SIZE(storcenter_physmap_partitions)); +#endif + + /* Lookup PCI host bridges */ + for_each_compatible_node(np, "pci", "mpc10x-pci") + storcenter_add_bridge(np); + + printk(KERN_INFO "IOMEGA StorCenter\n"); +} + +/* + * Interrupt setup and service. Interrrupts on the turbostation come + * from the four PCI slots plus onboard 8241 devices: I2C, DUART. + */ +static void __init storcenter_init_IRQ(void) +{ + struct mpic *mpic; + struct device_node *dnp; + const void *prop; + int size; + phys_addr_t paddr; + + dnp = of_find_node_by_type(NULL, "open-pic"); + if (dnp == NULL) + return; + + prop = of_get_property(dnp, "reg", &size); + if (prop == NULL) { + of_node_put(dnp); + return; + } + + paddr = (phys_addr_t)of_translate_address(dnp, prop); + mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, + 4, 32, " EPIC "); + + of_node_put(dnp); + + BUG_ON(mpic == NULL); + + /* PCI IRQs */ + /* + * 2.6.12 patch: + * openpic_set_sources(0, 5, OpenPIC_Addr + 0x10200); + * openpic_set_sources(5, 2, OpenPIC_Addr + 0x11120); + * first_irq, num_irqs, __iomem first_ISR + * o_ss: i, src: 0, fdf50200 + * o_ss: i, src: 1, fdf50220 + * o_ss: i, src: 2, fdf50240 + * o_ss: i, src: 3, fdf50260 + * o_ss: i, src: 4, fdf50280 + * o_ss: i, src: 5, fdf51120 + * o_ss: i, src: 6, fdf51140 + */ + mpic_assign_isu(mpic, 0, paddr + 0x10200); + mpic_assign_isu(mpic, 1, paddr + 0x10220); + mpic_assign_isu(mpic, 2, paddr + 0x10240); + mpic_assign_isu(mpic, 3, paddr + 0x10260); + mpic_assign_isu(mpic, 4, paddr + 0x10280); + mpic_assign_isu(mpic, 5, paddr + 0x11120); + mpic_assign_isu(mpic, 6, paddr + 0x11140); + + mpic_init(mpic); +} + +static void storcenter_restart(char *cmd) +{ + local_irq_disable(); + + /* Set exception prefix high - to the firmware */ + _nmask_and_or_msr(0, MSR_IP); + + /* Wait for reset to happen */ + for (;;) ; +} + +static int __init storcenter_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "storcenter"); +} + +define_machine(storcenter){ + .name = "IOMEGA StorCenter", + .probe = storcenter_probe, + .setup_arch = storcenter_setup_arch, + .init_IRQ = storcenter_init_IRQ, + .get_irq = mpic_get_irq, + .restart = storcenter_restart, + .calibrate_decr = generic_calibrate_decr, +}; -- cgit v0.10.2 From 96f39c1718091d63dc1c5012d566737ea0d2a20c Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 23 Jan 2008 12:43:14 -0600 Subject: [POWERPC] Add initial storcenter config file. Signed-off-by: Jon Loeliger Acked-by: Andy Wilcox Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig new file mode 100644 index 0000000..a034a5e --- /dev/null +++ b/arch/powerpc/configs/storcenter_defconfig @@ -0,0 +1,1174 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Tue Jan 8 09:33:54 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +CONFIG_CLASSIC32=y +# CONFIG_PPC_CHRP is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_EFIKA is not set +# CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_EMBEDDED6xx=y +# CONFIG_LINKSTATION is not set +CONFIG_STORCENTER=y +# CONFIG_MPC7448HPC2 is not set +# CONFIG_PPC_HOLLY is not set +# CONFIG_PPC_PRPMC2800 is not set +CONFIG_MPC10X_BRIDGE=y +CONFIG_MPC10X_OPENPIC=y +# CONFIG_MPC10X_STORE_GATHERING is not set +CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_CPM2 is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +# CONFIG_KEXEC is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,115200" +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_HIBERNATION_UP_POSSIBLE=y +# CONFIG_SECCOMP is not set +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="storcenter.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_FTL=y +CONFIG_NFTL=y +CONFIG_NFTL_RW=y +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xFF800000 +CONFIG_MTD_PHYSMAP_LEN=0x00800000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID456=y +CONFIG_MD_RAID5_RESHAPE=y +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set +# CONFIG_ARCNET is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +CONFIG_NVRAM=y +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=y +CONFIG_ASYNC_CORE=y +CONFIG_ASYNC_MEMCPY=y +CONFIG_ASYNC_XOR=y +# CONFIG_CRYPTO is not set +# CONFIG_PPC_CLOCK is not set -- cgit v0.10.2